We can delay refcount increment until we reassign the existing entry to
the current skb.
A 0 refcount can't happen while the nf_conn object is still in the
hash table and parallel mutations are impossible because we hold the
bucket lock.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
There is a misconception about what "insert_failed" means.
We increment this even when a clash got resolved, so it might not indicate
a problem.
Add a dedicated counter for clash resolution and only increment
insert_failed if a clash cannot be resolved.
For the old /proc interface, export this in place of an older stat
that got removed a while back.
For ctnetlink, export this with a new attribute.
Also correct an outdated comment that implies we add a duplicate tuple --
we only add the (unique) reply direction.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This counter increments when nf_conntrack_in sees a packet that already
has a conntrack attached or when the packet is marked as UNTRACKED.
Neither is an error.
The former is normal for loopback traffic. The second happens for
certain ICMPv6 packets or when nftables/ip(6)tables rules are in place.
In case someone needs to count UNTRACKED packets, or packets
that are marked as untracked before conntrack_in this can be done with
both nftables and ip(6)tables rules.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The /proc interface for nf_conntrack displays the "error" counter as
"icmp_error".
It makes sense to not increment "invalid" when failing to handle an icmp
packet since those are special.
For example, its possible for conntrack to see partial and/or fragmented
packets inside icmp errors. This should be a separate event and not get
mixed with the "invalid" counter.
Likewise, remove the "error" increment for errors from get_l4proto().
After this, the error counter will only increment for errors coming from
icmp(v6) packet handling.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Enables storing userdata for nft_table. Field udata points to user data
and udlen store its length.
Adds new attribute flag NFTA_TABLE_USERDATA
Signed-off-by: Jose M. Guisado Gomez <guigom@riseup.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Detect and rewrite a prefix embedded in an ICMPv6 original packet that was
rewritten by a corresponding DNPT/SNPT rule so it will be recognised by
the host that sent the original packet.
Example
Rules in effect on the 1:2:3:4::/64 + 5:6:7:8::/64 side router:
* SNPT src-pfx 1:2:3:4::/64 dst-pfx 5:6:7:8::/64
* DNPT src-pfx 5:6:7:8::/64 dst-pfx 1:2:3:4::/64
No rules on the 9🅰️b:c::/64 side.
1. 1:2:3:4::1 sends UDP packet to 9🅰️b:c::1
2. Router applies SNPT changing src to 5:6:7:8::ffef::1
3. 9🅰️b:c::1 receives packet with (src 5:6:7:8::ffef::1 dst 9🅰️b:c::1)
and replies with ICMPv6 port unreachable to 5:6:7:8::ffef::1,
including original packet (src 5:6:7:8::ffef::1 dst 9🅰️b:c::1)
4. Router forwards ICMPv6 packet with (src 9🅰️b:c::1 dst 5:6:7:8::ffef::1)
including original packet (src 5:6:7:8::ffef::1 dst 9🅰️b:c::1)
and applies DNPT changing dst to 1:2:3:4::1
5. 1:2:3:4::1 receives ICMPv6 packet with (src 9🅰️b:c::1 dst 1:2:3:4::1)
including original packet (src 5:6:7:8::ffef::1 dst 9🅰️b:c::1).
It doesn't recognise the original packet as the src doesn't
match anything it originally sent
With this change, at step 4, DNPT will also rewrite the original packet
src to 1:2:3:4::1, so at step 5, 1:2:3:4::1 will recognise the ICMPv6
error and provide feedback to the application properly.
Conversely, SNPT will help when ICMPv6 errors are sent from the
translated network.
1. 9🅰️b:c::1 sends UDP packet to 5:6:7:8::ffef::1
2. Router applies DNPT changing dst to 1:2:3:4::1
3. 1:2:3:4::1 receives packet with (src 9🅰️b:c::1 dst 1:2:3:4::1)
and replies with ICMPv6 port unreachable to 9🅰️b:c::1
including original packet (src 9🅰️b:c::1 dst 1:2:3:4::1)
4. Router forwards ICMPv6 packet with (src 1:2:3:4::1 dst 9🅰️b:c::1)
including original packet (src 9🅰️b:c::1 dst 1:2:3:4::1)
and applies SNPT changing src to 5:6:7:8::ffef::1
5. 9🅰️b:c::1 receives ICMPv6 packet with
(src 5:6:7:8::ffef::1 dst 9🅰️b:c::1) including
original packet (src 9🅰️b:c::1 dst 1:2:3:4::1).
It doesn't recognise the original packet as the dst doesn't
match anything it already sent
The change to SNPT means the ICMPv6 original packet dst will be
rewritten to 5:6:7:8::ffef::1 in step 4, allowing the error to be
properly recognised in step 5.
Signed-off-by: Michael Zhou <mzhou@cse.unsw.edu.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Commit d3b990b7f3 ("netlabel: fix problems with mapping removal")
added a check to return an error if ret_val != 0, before ret_val is
later used in a log message. Now it will unconditionally print "...
res=1". So just drop the check.
Addresses-Coverity: ("Dead code")
Fixes: d3b990b7f3 ("netlabel: fix problems with mapping removal")
Signed-off-by: Alex Dewar <alex.dewar90@gmail.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When ->init() fails, ->destroy() is called to clean up.
So it is unnecessary to clean up in red_init(), and it
would cause some refcount underflow.
Fixes: aee9caa03f ("net: sched: sch_red: Add qevents "early_drop" and "mark"")
Reported-and-tested-by: syzbot+b33c1cb0a30ebdc8a5f9@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+e5ea5f8a3ecfd4427a1c@syzkaller.appspotmail.com
Cc: Petr Machata <petrm@mellanox.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The sysctl that was added earlier by commit 79134e6ce2 ("net: do
not create fallback tunnels for non-default namespaces") to create
fall-back only in root-ns. This patch enhances that behavior to provide
option not to create fallback tunnels in root-ns as well. Since modules
that create fallback tunnels could be built-in and setting the sysctl
value after booting is pointless, so added a kernel cmdline options to
change this default. The default setting is preseved for backward
compatibility. The kernel command line option of fb_tunnels=initns will
set the sysctl value to 1 and will create fallback tunnels only in initns
while kernel cmdline fb_tunnels=none will set the sysctl value to 2 and
fallback tunnels are skipped in every netns.
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Maciej Zenczykowski <maze@google.com>
Cc: Jian Yang <jianyang@google.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The data races were reported by KCSAN:
BUG: KCSAN: data-race in netlink_recvmsg / skb_queue_tail
write (marked) to 0xffff8c0986e5a8c8 of 8 bytes by interrupt on cpu 3:
skb_queue_tail+0xcc/0x120
__netlink_sendskb+0x55/0x80
netlink_broadcast_filtered+0x465/0x7e0
nlmsg_notify+0x8f/0x120
rtnl_notify+0x8e/0xb0
__neigh_notify+0xf2/0x120
neigh_update+0x927/0xde0
arp_process+0x8a3/0xf50
arp_rcv+0x27c/0x3b0
__netif_receive_skb_core+0x181c/0x1840
__netif_receive_skb+0x38/0xf0
netif_receive_skb_internal+0x77/0x1c0
napi_gro_receive+0x1bd/0x1f0
e1000_clean_rx_irq+0x538/0xb20 [e1000]
e1000_clean+0x5e4/0x1340 [e1000]
net_rx_action+0x310/0x9d0
__do_softirq+0xe8/0x308
irq_exit+0x109/0x110
do_IRQ+0x7f/0xe0
ret_from_intr+0x0/0x1d
0xffffffffffffffff
read to 0xffff8c0986e5a8c8 of 8 bytes by task 1463 on cpu 0:
netlink_recvmsg+0x40b/0x820
sock_recvmsg+0xc9/0xd0
___sys_recvmsg+0x1a4/0x3b0
__sys_recvmsg+0x86/0x120
__x64_sys_recvmsg+0x52/0x70
do_syscall_64+0xb5/0x360
entry_SYSCALL_64_after_hwframe+0x65/0xca
0xffffffffffffffff
Since the write is under sk_receive_queue->lock but the read
is done as lockless. so fix it by using skb_queue_empty_lockless()
instead of skb_queue_empty() for the read in netlink_rcv_wake()
Signed-off-by: zhudi <zhudi21@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Most of the maps do not use max_entries during verification time.
Thus, those map_meta_equal() do not need to enforce max_entries
when it is inserted as an inner map during runtime. The max_entries
check is removed from the default implementation bpf_map_meta_equal().
The prog_array_map and xsk_map are exception. Its map_gen_lookup
uses max_entries to generate inline lookup code. Thus, they will
implement its own map_meta_equal() to enforce max_entries.
Since there are only two cases now, the max_entries check
is not refactored and stays in its own .c file.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200828011813.1970516-1-kafai@fb.com
Some properties of the inner map is used in the verification time.
When an inner map is inserted to an outer map at runtime,
bpf_map_meta_equal() is currently used to ensure those properties
of the inserting inner map stays the same as the verification
time.
In particular, the current bpf_map_meta_equal() checks max_entries which
turns out to be too restrictive for most of the maps which do not use
max_entries during the verification time. It limits the use case that
wants to replace a smaller inner map with a larger inner map. There are
some maps do use max_entries during verification though. For example,
the map_gen_lookup in array_map_ops uses the max_entries to generate
the inline lookup code.
To accommodate differences between maps, the map_meta_equal is added
to bpf_map_ops. Each map-type can decide what to check when its
map is used as an inner map during runtime.
Also, some map types cannot be used as an inner map and they are
currently black listed in bpf_map_meta_alloc() in map_in_map.c.
It is not unusual that the new map types may not aware that such
blacklist exists. This patch enforces an explicit opt-in
and only allows a map to be used as an inner map if it has
implemented the map_meta_equal ops. It is based on the
discussion in [1].
All maps that support inner map has its map_meta_equal points
to bpf_map_meta_equal in this patch. A later patch will
relax the max_entries check for most maps. bpf_types.h
counts 28 map types. This patch adds 23 ".map_meta_equal"
by using coccinelle. -5 for
BPF_MAP_TYPE_PROG_ARRAY
BPF_MAP_TYPE_(PERCPU)_CGROUP_STORAGE
BPF_MAP_TYPE_STRUCT_OPS
BPF_MAP_TYPE_ARRAY_OF_MAPS
BPF_MAP_TYPE_HASH_OF_MAPS
The "if (inner_map->inner_map_meta)" check in bpf_map_meta_alloc()
is moved such that the same error is returned.
[1]: https://lore.kernel.org/bpf/20200522022342.899756-1-kafai@fb.com/
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200828011806.1970400-1-kafai@fb.com
* some code to support SAE (WPA3) offload in AP mode
* many documentation (wording) fixes/updates
* netlink policy updates, including the use of NLA_RANGE
with binary attributes
* regulatory improvements for adjacent frequency bands
* and a few other small additions/refactorings/cleanups
-----BEGIN PGP SIGNATURE-----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=Ys45
-----END PGP SIGNATURE-----
Merge tag 'mac80211-next-for-davem-2020-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
This time we have:
* some code to support SAE (WPA3) offload in AP mode
* many documentation (wording) fixes/updates
* netlink policy updates, including the use of NLA_RANGE
with binary attributes
* regulatory improvements for adjacent frequency bands
* and a few other small additions/refactorings/cleanups
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
* fixes for AQL (airtime queue limits)
* reduce packet loss detection false positives
* a small channel number fix for the 6 GHz band
* a fix for 80+80/160 MHz negotiation
* an nl80211 attribute (NL80211_ATTR_HE_6GHZ_CAPABILITY) fix
* add a missing sanity check for the regulatory code
-----BEGIN PGP SIGNATURE-----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=zMP7
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-davem-2020-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
We have:
* fixes for AQL (airtime queue limits)
* reduce packet loss detection false positives
* a small channel number fix for the 6 GHz band
* a fix for 80+80/160 MHz negotiation
* an nl80211 attribute (NL80211_ATTR_HE_6GHZ_CAPABILITY) fix
* add a missing sanity check for the regulatory code
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix a memory leak in rxkad_verify_response() whereby the response buffer
doesn't get freed if we fail to allocate a ticket buffer.
Fixes: ef68622da9 ("rxrpc: Handle temporary errors better in rxkad security")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=FWHJ
-----END PGP SIGNATURE-----
Merge tag 'rxrpc-fixes-20200820' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc, afs: Fix probing issues
Here are some fixes for rxrpc and afs to fix issues in the RTT measuring in
rxrpc and thence the Volume Location server probing in afs:
(1) Move the serial number of a received ACK into a local variable to
simplify the next patch.
(2) Fix the loss of RTT samples due to extra interposed ACKs causing
baseline information to be discarded too early. This is a particular
problem for afs when it sends a single very short call to probe a
server it hasn't talked to recently.
(3) Fix rxrpc_kernel_get_srtt() to indicate whether it actually has seen
any valid samples or not.
(4) Remove a field that's set/woken, but never read/waited on.
(5) Expose the RTT and other probe information through procfs to make
debugging of this stuff easier.
(6) Fix VL rotation in afs to only use summary information from VL probing
and not the probe running state (which gets clobbered when next a
probe is issued).
(7) Fix VL rotation to actually return the error aggregated from the probe
errors.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
It seems that due to a copy & paste error the void pointer
in batadv_choose_backbone_gw() is cast to the wrong type.
Fixing this by using "struct batadv_bla_backbone_gw" instead of "struct
batadv_bla_claim" which better matches the caller's side.
For now it seems that we were lucky because the two structs both have
their orig/vid and addr/vid in the beginning. However I stumbled over
this issue when I was trying to add some debug variables in front of
"orig" in batadv_backbone_gw, which caused hash lookups to fail.
Fixes: 07568d0369 ("batman-adv: don't rely on positions in struct for hashing")
Signed-off-by: Linus Lüssing <ll@simonwunderlich.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Fix some comments, including wrong function name, duplicated word and so
on.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Let drivers advertise support for AP-mode SAE authentication offload
with a new NL80211_EXT_FEATURE_SAE_OFFLOAD_AP flag.
Signed-off-by: Chung-Hsien Hsu <stanley.hsu@cypress.com>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Link: https://lore.kernel.org/r/20200817073316.33402-4-stanley.hsu@cypress.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We want to reuse the functions and structs for other counters such as BSS
color change. Rename them to more generic names.
Signed-off-by: John Crispin <john@phrozen.org>
Link: https://lore.kernel.org/r/20200811080107.3615705-2-john@phrozen.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We want to reuse the attributes for other counters such as BSS color
change. Rename them to more generic names.
Signed-off-by: John Crispin <john@phrozen.org>
Link: https://lore.kernel.org/r/20200811080107.3615705-1-john@phrozen.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This patch adds the nl80211 structs, definitions, policies and parsing
code required to pass fixed HE rate, GI and LTF settings.
Signed-off-by: Miles Hu <milehu@codeaurora.org>
Signed-off-by: John Crispin <john@phrozen.org>
Link: https://lore.kernel.org/r/20200804081630.2013619-1-john@phrozen.org
[fix comment]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Some usable channels are located in the union of adjacent
regulatory rules, for example channel 144 in Germany.
Enable them, by also checking if a channel spans two adjacent
regulatory rules/frequency ranges.
All flags involved are disabling things, therefore we can build
the maximum by or-ing them together. Furthermore, take the maximum
of DFS CAC time values and the minimum of allowed power of both
adjacent channels in order to comply with both regulatory rules at
the same time.
Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
Link: https://lore.kernel.org/r/20200803144353.305538-2-markus.theil@tu-ilmenau.de
[remove unrelated comment changes]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
As a preparation to handle adjacent rule channels,
factor out handling channels located in a single
regulatory rule.
Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
Link: https://lore.kernel.org/r/20200803144353.305538-1-markus.theil@tu-ilmenau.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We have a few attributes with minimum and maximum lengths that are
not the same, use the new feature of being able to specify both in
the policy to validate them, removing code and allowing this to be
advertised to userspace in the policy export.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20200819085642.8f12ffa14f33.I9d948d59870e521febcd79bb4a986b1de1dca47b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Adjust the 6 GHz frequency to channel conversion function,
the other way around was previously handled.
Signed-off-by: Amar Singhal <asinghal@codeaurora.org>
Link: https://lore.kernel.org/r/1592599921-10607-1-git-send-email-asinghal@codeaurora.org
[rewrite commit message, hard-code channel 2]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When running a large number of packets per second with a high data rate
and long A-MPDUs, the packet loss threshold can be reached very quickly
when the link conditions change. This frequently shows up as spurious
disconnects.
Mitigate false positives by using a similar logic for regular stations
as the one being used for TDLS, though with a more aggressive timeout.
Packet loss events are only reported if no ACK was received for a second.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20200808172542.41628-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fix cfg80211_chandef_usable():
consider IEEE80211_VHT_CAP_EXT_NSS_BW when verifying 160/80+80 MHz.
Based on:
"Table 9-272 — Setting of the Supported Channel Width Set subfield and Extended NSS BW
Support subfield at a STA transmitting the VHT Capabilities Information field"
From "Draft P802.11REVmd_D3.0.pdf"
Signed-off-by: Aviad Brikman <aviad.brikman@celeno.com>
Signed-off-by: Shay Bar <shay.bar@celeno.com>
Link: https://lore.kernel.org/r/20200826143139.25976-1-shay.bar@celeno.com
[reformat the code a bit and use u32_get_bits()]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Links with low data rates use much smaller aggregates and are much more
sensitive to latency added by bufferbloat.
Tune the assumed aggregation length based on the tx rate duration.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20200821163045.62140-3-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This will be used to enhance AQL estimated aggregation length
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20200821163045.62140-2-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since ieee80211_tx_info does not have enough room to encode HE rates, HE
drivers use status->rate to provide rate info.
Store it in struct sta_info and use it for AQL.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20200821163045.62140-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
xfrm interfaces currently test for !skb->ignore_df when deciding
whether to update the pmtu on the skb's dst. Because of this, no pmtu
exception is created when we do something like:
ping -s 1438 <dest>
By dropping this check, the pmtu exception will be created and the
next ping attempt will work.
Fixes: f203b76d78 ("xfrm: Add virtual xfrm interfaces")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
napi_disable() makes sure to set the NAPI_STATE_NPSVC bit to prevent
netpoll from accessing rings before init is complete. However, the
same is not done for fresh napi instances in netif_napi_add(),
even though we expect NAPI instances to be added as disabled.
This causes crashes during driver reconfiguration (enabling XDP,
changing the channel count) - if there is any printk() after
netif_napi_add() but before napi_enable().
To ensure memory ordering is correct we need to use RCU accessors.
Reported-by: Rob Sherwood <rsher@fb.com>
Fixes: 2d8bff1269 ("netpoll: Close race condition between poll_one_napi and napi_disable")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Each nexthop group contains an indication if it has IPv4 nexthops
('has_v4'). Its purpose is to prevent IPv6 routes from using groups with
IPv4 nexthops.
However, the indication is not updated when a nexthop is replaced. This
results in the kernel wrongly rejecting IPv6 routes from pointing to
groups that only contain IPv6 nexthops. Example:
# ip nexthop replace id 1 via 192.0.2.2 dev dummy10
# ip nexthop replace id 10 group 1
# ip nexthop replace id 1 via 2001:db8:1::2 dev dummy10
# ip route replace 2001:db8:10::/64 nhid 10
Error: IPv6 routes can not use an IPv4 nexthop.
Solve this by iterating over all the nexthop groups that the replaced
nexthop is a member of and potentially update their IPv4 indication
according to the new set of member nexthops.
Avoid wasting cycles by only performing the update in case an IPv4
nexthop is replaced by an IPv6 nexthop.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Each nexthop group contains an indication if it has IPv4 nexthops
('has_v4'). Its purpose is to prevent IPv6 routes from using groups with
IPv4 nexthops.
However, the indication is not updated when a nexthop is removed. This
results in the kernel wrongly rejecting IPv6 routes from pointing to
groups that only contain IPv6 nexthops. Example:
# ip nexthop replace id 1 via 192.0.2.2 dev dummy10
# ip nexthop replace id 2 via 2001:db8:1::2 dev dummy10
# ip nexthop replace id 10 group 1/2
# ip nexthop del id 1
# ip route replace 2001:db8:10::/64 nhid 10
Error: IPv6 routes can not use an IPv4 nexthop.
Solve this by updating the indication according to the new set of
member nexthops.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The pointer is not RCU protected, so remove the unnecessary
rtnl_dereference(). This suppresses the following warning:
net/ipv4/nexthop.c:1101:24: error: incompatible types in comparison expression (different address spaces):
net/ipv4/nexthop.c:1101:24: struct rb_node [noderef] __rcu *
net/ipv4/nexthop.c:1101:24: struct rb_node *
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The code correctly uses nla_get_be32() to get the payload of the
attribute, but incorrectly uses nla_put_u32() to add the attribute to
the payload. This results in the following warning:
net/ipv4/nexthop.c:279:59: warning: incorrect type in argument 3 (different base types)
net/ipv4/nexthop.c:279:59: expected unsigned int [usertype] value
net/ipv4/nexthop.c:279:59: got restricted __be32 [usertype] ipv4
Suppress the warning by using nla_put_be32().
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The struct looks as follows:
struct nh_group {
struct nh_group *spare; /* spare group for removals */
u16 num_nh;
bool mpath;
bool fdb_nh;
bool has_v4;
struct nh_grp_entry nh_entries[];
};
But its offset within 'struct nexthop' is also taken into account to
determine the allocation size.
Instead, use struct_size() to allocate only the required number of
bytes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After subflow lock is dropped, more wmem might have been made available.
This fixes a deadlock in mptcp_connect.sh 'mmap' mode: wmem is exhausted.
But as the mptcp socket holds on to already-acked data (for retransmit)
no wakeup will occur.
Using 'goto restart' calls mptcp_clean_una(sk) which will free pages
that have been acked completely in the mean time.
Fixes: fb529e62d3 ("mptcp: break and restart in case mptcp sndbuf is full")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit 9c66d15646 ("taprio: Add support for hardware
offloading") there's a bit of inconsistency when offloading schedules
to the hardware:
In software mode, the gate masks are specified in terms of traffic
classes, so if say "sched-entry S 03 20000", it means that the traffic
classes 0 and 1 are open for 20us; when taprio is offloaded to
hardware, the gate masks are specified in terms of hardware queues.
The idea here is to fix hardware offloading, so schedules in hardware
and software mode have the same behavior. What's needed to do is to
map traffic classes to queues when applying the offload to the driver.
Fixes: 9c66d15646 ("taprio: Add support for hardware offloading")
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Aloni reports that when a server disconnects abruptly, a few
memory regions are left DMA mapped. Over time this leak could pin
enough I/O resources to slow or even deadlock an NFS/RDMA client.
I found that if a transport disconnects before pending Send and
FastReg WRs can be posted, the to-be-registered MRs are stranded on
the req's rl_registered list and never released -- since they
weren't posted, there's no Send completion to DMA unmap them.
Reported-by: Dan Aloni <dan@kernelim.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
- Eliminate an oops introduced in v5.8
- Remove a duplicate #include added by nfsd-5.9
-----BEGIN PGP SIGNATURE-----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=czB3
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.9-1' of git://git.linux-nfs.org/projects/cel/cel-2.6
Pull nfs server fixes from Chuck Lever:
- Eliminate an oops introduced in v5.8
- Remove a duplicate #include added by nfsd-5.9
* tag 'nfsd-5.9-1' of git://git.linux-nfs.org/projects/cel/cel-2.6:
SUNRPC: remove duplicate include
nfsd: fix oops on mixed NFSv4/NFSv3 client access
Adds support for both bpf_{sk, inode}_storage_{get, delete} to be used
in LSM programs. These helpers are not used for tracing programs
(currently) as their usage is tied to the life-cycle of the object and
should only be used where the owning object won't be freed (when the
owning object is passed as an argument to the LSM hook). Thus, they
are safer to use in LSM hooks than tracing. Usage of local storage in
tracing programs will probably follow a per function based whitelist
approach.
Since the UAPI helper signature for bpf_sk_storage expect a bpf_sock,
it, leads to a compilation warning for LSM programs, it's also updated
to accept a void * pointer instead.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200825182919.1118197-7-kpsingh@chromium.org
Refactor the functionality in bpf_sk_storage.c so that concept of
storage linked to kernel objects can be extended to other objects like
inode, task_struct etc.
Each new local storage will still be a separate map and provide its own
set of helpers. This allows for future object specific extensions and
still share a lot of the underlying implementation.
This includes the changes suggested by Martin in:
https://lore.kernel.org/bpf/20200725013047.4006241-1-kafai@fb.com/
adding new map operations to support bpf_local_storage maps:
* storages for different kernel objects to optionally have different
memory charging strategy (map_local_storage_charge,
map_local_storage_uncharge)
* Functionality to extract the storage pointer from a pointer to the
owning object (map_owner_storage_ptr)
Co-developed-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200825182919.1118197-4-kpsingh@chromium.org
A purely mechanical change to split the renaming from the actual
generalization.
Flags/consts:
SK_STORAGE_CREATE_FLAG_MASK BPF_LOCAL_STORAGE_CREATE_FLAG_MASK
BPF_SK_STORAGE_CACHE_SIZE BPF_LOCAL_STORAGE_CACHE_SIZE
MAX_VALUE_SIZE BPF_LOCAL_STORAGE_MAX_VALUE_SIZE
Structs:
bucket bpf_local_storage_map_bucket
bpf_sk_storage_map bpf_local_storage_map
bpf_sk_storage_data bpf_local_storage_data
bpf_sk_storage_elem bpf_local_storage_elem
bpf_sk_storage bpf_local_storage
The "sk" member in bpf_local_storage is also updated to "owner"
in preparation for changing the type to void * in a subsequent patch.
Functions:
selem_linked_to_sk selem_linked_to_storage
selem_alloc bpf_selem_alloc
__selem_unlink_sk bpf_selem_unlink_storage_nolock
__selem_link_sk bpf_selem_link_storage_nolock
selem_unlink_sk __bpf_selem_unlink_storage
sk_storage_update bpf_local_storage_update
__sk_storage_lookup bpf_local_storage_lookup
bpf_sk_storage_map_free bpf_local_storage_map_free
bpf_sk_storage_map_alloc bpf_local_storage_map_alloc
bpf_sk_storage_map_alloc_check bpf_local_storage_map_alloc_check
bpf_sk_storage_map_check_btf bpf_local_storage_map_check_btf
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200825182919.1118197-2-kpsingh@chromium.org
cfpkt_peek_head return 0 and 1, caller is checking error using <0
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a pure codestyle cleanup patch. Also add a blank line after
declarations as warned by checkpatch.pl.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check midx against 0 is always equal to check midx against sk_bound_dev_if
when sk_bound_dev_if is known not equal to 0 in these case.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can avoid unnecessary inet_addr_type() call by check addr against
INADDR_ANY first.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can defer set ping saddr until we successfully get the ping port. So we
can avoid clear saddr when failed. Since ping_clear_saddr() is not used
anymore now, remove it.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When mtu is locked, we should not obtain ipv4 mtu as we return immediately
in this case and leave acquired ipv4 mtu unused.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- bump version strings, by Simon Wunderlich
- Drop unused function batadv_hardif_remove_interfaces(),
by Sven Eckelmann
- delete duplicated words, by Randy Dunlap
- Drop (even more) repeated words in comments, by Sven Eckelmann
- Migrate to linux/prandom.h, by Sven Eckelmann
-----BEGIN PGP SIGNATURE-----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=1GXQ
-----END PGP SIGNATURE-----
Merge tag 'batadv-next-for-davem-20200824' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
This cleanup patchset includes the following patches:
- bump version strings, by Simon Wunderlich
- Drop unused function batadv_hardif_remove_interfaces(),
by Sven Eckelmann
- delete duplicated words, by Randy Dunlap
- Drop (even more) repeated words in comments, by Sven Eckelmann
- Migrate to linux/prandom.h, by Sven Eckelmann
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
- Avoid uninitialized memory access when handling DHCP, by Sven Eckelmann
- Fix check for own OGM in OGM receive handler, by Linus Luessing
- Fix netif_rx access for non-interrupt context in BLA, by Jussi Kivilinna
-----BEGIN PGP SIGNATURE-----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=ikYK
-----END PGP SIGNATURE-----
Merge tag 'batadv-net-for-davem-20200824' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here are some batman-adv bugfixes:
- Avoid uninitialized memory access when handling DHCP, by Sven Eckelmann
- Fix check for own OGM in OGM receive handler, by Linus Luessing
- Fix netif_rx access for non-interrupt context in BLA, by Jussi Kivilinna
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Use helper macro RT_TOS() to get tos in __icmp_send().
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is no need to fetch errno and fatal info from icmp_err_convert when
icmp code is ICMP_FRAG_NEEDED.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Drop duplicated words in /net/dccp/.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Cc: dccp@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Drop duplicated words in net/netlink/.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Drop duplicate words in comments in net/ipv4/.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Drop the repeated word "an".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Cc: linux-sctp@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Drop the repeated words "for", "that", and "a".
Change "his" to "this".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Cc: linux-sctp@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Drop the repeated words "of" and "that".
Add some punctuation for readability.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Cc: linux-sctp@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Drop the repeated word "the".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Cc: linux-sctp@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Drop the repeated word "of".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Cc: linux-sctp@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Drop the repeated word "the" and "now".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Cc: linux-sctp@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Drop the repeated word "the" in two places.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Cc: linux-sctp@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
For TCP tx zero-copy, the kernel notifies the process of completions by
queuing completion notifications on the socket error queue. This patch
allows reading these notifications via recvmsg to support TCP tx
zero-copy.
Ancillary data was originally disallowed due to privilege escalation
via io_uring's offloading of sendmsg() onto a kernel thread with kernel
credentials (https://crbug.com/project-zero/1975). So, we must ensure
that the socket type is one where the ancillary data types that are
delivered on recvmsg are plain data (no file descriptors or values that
are translated based on the identity of the calling process).
This was tested by using io_uring to call recvmsg on the MSG_ERRQUEUE
with tx zero-copy enabled. Before this patch, we received -EINVALID from
this specific code path. After this patch, we could read tcp tx
zero-copy completion notifications from the MSG_ERRQUEUE.
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Arjun Roy <arjunroy@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jann Horn <jannh@google.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Luke Hsiao <lukehsiao@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function consume_skb is only meaningful when tracing is enabled.
This patch makes it conditional on CONFIG_TRACEPOINTS.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes two main problems seen when removing NetLabel
mappings: memory leaks and potentially extra audit noise.
The memory leaks are caused by not properly free'ing the mapping's
address selector struct when free'ing the entire entry as well as
not properly cleaning up a temporary mapping entry when adding new
address selectors to an existing entry. This patch fixes both these
problems such that kmemleak reports no NetLabel associated leaks
after running the SELinux test suite.
The potentially extra audit noise was caused by the auditing code in
netlbl_domhsh_remove_entry() being called regardless of the entry's
validity. If another thread had already marked the entry as invalid,
but not removed/free'd it from the list of mappings, then it was
possible that an additional mapping removal audit record would be
generated. This patch fixes this by returning early from the removal
function when the entry was previously marked invalid. This change
also had the side benefit of improving the code by decreasing the
indentation level of large chunk of code by one (accounting for most
of the diffstat).
Fixes: 63c4168874 ("netlabel: Add network address selectors to the NetLabel/LSM domain mapping")
Reported-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cited patch in fixes tag misses to protect port list traversal
while traversing per port reporter list.
Protect it using devlink instance lock.
Fixes: f4f5416601 ("devlink: Implement devlink health reporters on per-port basis")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cited patch in fixes tag initializes reporters_list and reporters_lock
of a devlink port after devlink port is added to the list. Once port
is added to the list, devlink_nl_cmd_health_reporter_get_dumpit()
can access the uninitialized mutex and reporters list head.
Fix it by initializing port reporters field before adding port to the
list.
Fixes: f4f5416601 ("devlink: Implement devlink health reporters on per-port basis")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With disabling bh in the whole sctp_get_port_local(), when
snum == 0 and too many ports have been used, the do-while
loop will take the cpu for a long time and cause cpu stuck:
[ ] watchdog: BUG: soft lockup - CPU#11 stuck for 22s!
[ ] RIP: 0010:native_queued_spin_lock_slowpath+0x4de/0x940
[ ] Call Trace:
[ ] _raw_spin_lock+0xc1/0xd0
[ ] sctp_get_port_local+0x527/0x650 [sctp]
[ ] sctp_do_bind+0x208/0x5e0 [sctp]
[ ] sctp_autobind+0x165/0x1e0 [sctp]
[ ] sctp_connect_new_asoc+0x355/0x480 [sctp]
[ ] __sctp_connect+0x360/0xb10 [sctp]
There's no need to disable bh in the whole function of
sctp_get_port_local. So fix this cpu stuck by removing
local_bh_disable() called at the beginning, and using
spin_lock_bh() instead.
The same thing was actually done for inet_csk_get_port() in
Commit ea8add2b19 ("tcp/dccp: better use of ephemeral
ports in bind()").
Thanks to Marcelo for pointing the buggy code out.
v1->v2:
- use cond_resched() to yield cpu to other tasks if needed,
as Eric noticed.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Ying Xu <yinxu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch is adapted from Eric's patch in an earlier discussion [1].
The TCP_SAVE_SYN currently only stores the network header and
tcp header. This patch allows it to optionally store
the mac header also if the setsockopt's optval is 2.
It requires one more bit for the "save_syn" bit field in tcp_sock.
This patch achieves this by moving the syn_smc bit next to the is_mptcp.
The syn_smc is currently used with the TCP experimental option. Since
syn_smc is only used when CONFIG_SMC is enabled, this patch also puts
the "IS_ENABLED(CONFIG_SMC)" around it like the is_mptcp did
with "IS_ENABLED(CONFIG_MPTCP)".
The mac_hdrlen is also stored in the "struct saved_syn"
to allow a quick offset from the bpf prog if it chooses to start
getting from the network header or the tcp header.
[1]: https://lore.kernel.org/netdev/CANn89iLJNWh6bkH7DNhy_kmcAexuUCccqERqe7z2QsvPhGrYPQ@mail.gmail.com/
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/bpf/20200820190123.2886935-1-kafai@fb.com
[ Note: The TCP changes here is mainly to implement the bpf
pieces into the bpf_skops_*() functions introduced
in the earlier patches. ]
The earlier effort in BPF-TCP-CC allows the TCP Congestion Control
algorithm to be written in BPF. It opens up opportunities to allow
a faster turnaround time in testing/releasing new congestion control
ideas to production environment.
The same flexibility can be extended to writing TCP header option.
It is not uncommon that people want to test new TCP header option
to improve the TCP performance. Another use case is for data-center
that has a more controlled environment and has more flexibility in
putting header options for internal only use.
For example, we want to test the idea in putting maximum delay
ACK in TCP header option which is similar to a draft RFC proposal [1].
This patch introduces the necessary BPF API and use them in the
TCP stack to allow BPF_PROG_TYPE_SOCK_OPS program to parse
and write TCP header options. It currently supports most of
the TCP packet except RST.
Supported TCP header option:
───────────────────────────
This patch allows the bpf-prog to write any option kind.
Different bpf-progs can write its own option by calling the new helper
bpf_store_hdr_opt(). The helper will ensure there is no duplicated
option in the header.
By allowing bpf-prog to write any option kind, this gives a lot of
flexibility to the bpf-prog. Different bpf-prog can write its
own option kind. It could also allow the bpf-prog to support a
recently standardized option on an older kernel.
Sockops Callback Flags:
──────────────────────
The bpf program will only be called to parse/write tcp header option
if the following newly added callback flags are enabled
in tp->bpf_sock_ops_cb_flags:
BPF_SOCK_OPS_PARSE_UNKNOWN_HDR_OPT_CB_FLAG
BPF_SOCK_OPS_PARSE_ALL_HDR_OPT_CB_FLAG
BPF_SOCK_OPS_WRITE_HDR_OPT_CB_FLAG
A few words on the PARSE CB flags. When the above PARSE CB flags are
turned on, the bpf-prog will be called on packets received
at a sk that has at least reached the ESTABLISHED state.
The parsing of the SYN-SYNACK-ACK will be discussed in the
"3 Way HandShake" section.
The default is off for all of the above new CB flags, i.e. the bpf prog
will not be called to parse or write bpf hdr option. There are
details comment on these new cb flags in the UAPI bpf.h.
sock_ops->skb_data and bpf_load_hdr_opt()
─────────────────────────────────────────
sock_ops->skb_data and sock_ops->skb_data_end covers the whole
TCP header and its options. They are read only.
The new bpf_load_hdr_opt() helps to read a particular option "kind"
from the skb_data.
Please refer to the comment in UAPI bpf.h. It has details
on what skb_data contains under different sock_ops->op.
3 Way HandShake
───────────────
The bpf-prog can learn if it is sending SYN or SYNACK by reading the
sock_ops->skb_tcp_flags.
* Passive side
When writing SYNACK (i.e. sock_ops->op == BPF_SOCK_OPS_WRITE_HDR_OPT_CB),
the received SYN skb will be available to the bpf prog. The bpf prog can
use the SYN skb (which may carry the header option sent from the remote bpf
prog) to decide what bpf header option should be written to the outgoing
SYNACK skb. The SYN packet can be obtained by getsockopt(TCP_BPF_SYN*).
More on this later. Also, the bpf prog can learn if it is in syncookie
mode (by checking sock_ops->args[0] == BPF_WRITE_HDR_TCP_SYNACK_COOKIE).
The bpf prog can store the received SYN pkt by using the existing
bpf_setsockopt(TCP_SAVE_SYN). The example in a later patch does it.
[ Note that the fullsock here is a listen sk, bpf_sk_storage
is not very useful here since the listen sk will be shared
by many concurrent connection requests.
Extending bpf_sk_storage support to request_sock will add weight
to the minisock and it is not necessary better than storing the
whole ~100 bytes SYN pkt. ]
When the connection is established, the bpf prog will be called
in the existing PASSIVE_ESTABLISHED_CB callback. At that time,
the bpf prog can get the header option from the saved syn and
then apply the needed operation to the newly established socket.
The later patch will use the max delay ack specified in the SYN
header and set the RTO of this newly established connection
as an example.
The received ACK (that concludes the 3WHS) will also be available to
the bpf prog during PASSIVE_ESTABLISHED_CB through the sock_ops->skb_data.
It could be useful in syncookie scenario. More on this later.
There is an existing getsockopt "TCP_SAVED_SYN" to return the whole
saved syn pkt which includes the IP[46] header and the TCP header.
A few "TCP_BPF_SYN*" getsockopt has been added to allow specifying where to
start getting from, e.g. starting from TCP header, or from IP[46] header.
The new getsockopt(TCP_BPF_SYN*) will also know where it can get
the SYN's packet from:
- (a) the just received syn (available when the bpf prog is writing SYNACK)
and it is the only way to get SYN during syncookie mode.
or
- (b) the saved syn (available in PASSIVE_ESTABLISHED_CB and also other
existing CB).
The bpf prog does not need to know where the SYN pkt is coming from.
The getsockopt(TCP_BPF_SYN*) will hide this details.
Similarly, a flags "BPF_LOAD_HDR_OPT_TCP_SYN" is also added to
bpf_load_hdr_opt() to read a particular header option from the SYN packet.
* Fastopen
Fastopen should work the same as the regular non fastopen case.
This is a test in a later patch.
* Syncookie
For syncookie, the later example patch asks the active
side's bpf prog to resend the header options in ACK. The server
can use bpf_load_hdr_opt() to look at the options in this
received ACK during PASSIVE_ESTABLISHED_CB.
* Active side
The bpf prog will get a chance to write the bpf header option
in the SYN packet during WRITE_HDR_OPT_CB. The received SYNACK
pkt will also be available to the bpf prog during the existing
ACTIVE_ESTABLISHED_CB callback through the sock_ops->skb_data
and bpf_load_hdr_opt().
* Turn off header CB flags after 3WHS
If the bpf prog does not need to write/parse header options
beyond the 3WHS, the bpf prog can clear the bpf_sock_ops_cb_flags
to avoid being called for header options.
Or the bpf-prog can select to leave the UNKNOWN_HDR_OPT_CB_FLAG on
so that the kernel will only call it when there is option that
the kernel cannot handle.
[1]: draft-wang-tcpm-low-latency-opt-00
https://tools.ietf.org/html/draft-wang-tcpm-low-latency-opt-00
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200820190104.2885895-1-kafai@fb.com
A later patch needs to add a few pointers and a few u8 to
sock_ops_kern. Hence, this patch saves some spaces by moving
some of the existing members from u32 to u8 so that the later
patch can still fit everything in a cacheline.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200820190058.2885640-1-kafai@fb.com
The bpf prog needs to parse the SYN header to learn what options have
been sent by the peer's bpf-prog before writing its options into SYNACK.
This patch adds a "syn_skb" arg to tcp_make_synack() and send_synack().
This syn_skb will eventually be made available (as read-only) to the
bpf prog. This will be the only SYN packet available to the bpf
prog during syncookie. For other regular cases, the bpf prog can
also use the saved_syn.
When writing options, the bpf prog will first be called to tell the
kernel its required number of bytes. It is done by the new
bpf_skops_hdr_opt_len(). The bpf prog will only be called when the new
BPF_SOCK_OPS_WRITE_HDR_OPT_CB_FLAG is set in tp->bpf_sock_ops_cb_flags.
When the bpf prog returns, the kernel will know how many bytes are needed
and then update the "*remaining" arg accordingly. 4 byte alignment will
be included in the "*remaining" before this function returns. The 4 byte
aligned number of bytes will also be stored into the opts->bpf_opt_len.
"bpf_opt_len" is a newly added member to the struct tcp_out_options.
Then the new bpf_skops_write_hdr_opt() will call the bpf prog to write the
header options. The bpf prog is only called if it has reserved spaces
before (opts->bpf_opt_len > 0).
The bpf prog is the last one getting a chance to reserve header space
and writing the header option.
These two functions are half implemented to highlight the changes in
TCP stack. The actual codes preparing the bpf running context and
invoking the bpf prog will be added in the later patch with other
necessary bpf pieces.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/bpf/20200820190052.2885316-1-kafai@fb.com
The patch adds a function bpf_skops_parse_hdr().
It will call the bpf prog to parse the TCP header received at
a tcp_sock that has at least reached the ESTABLISHED state.
For the packets received during the 3WHS (SYN, SYNACK and ACK),
the received skb will be available to the bpf prog during the callback
in bpf_skops_established() introduced in the previous patch and
in the bpf_skops_write_hdr_opt() that will be added in the
next patch.
Calling bpf prog to parse header is controlled by two new flags in
tp->bpf_sock_ops_cb_flags:
BPF_SOCK_OPS_PARSE_UNKNOWN_HDR_OPT_CB_FLAG and
BPF_SOCK_OPS_PARSE_ALL_HDR_OPT_CB_FLAG.
When BPF_SOCK_OPS_PARSE_UNKNOWN_HDR_OPT_CB_FLAG is set,
the bpf prog will only be called when there is unknown
option in the TCP header.
When BPF_SOCK_OPS_PARSE_ALL_HDR_OPT_CB_FLAG is set,
the bpf prog will be called on all received TCP header.
This function is half implemented to highlight the changes in
TCP stack. The actual codes preparing the bpf running context and
invoking the bpf prog will be added in the later patch with other
necessary bpf pieces.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/bpf/20200820190046.2885054-1-kafai@fb.com
In tcp_init_transfer(), it currently calls the bpf prog to give it a
chance to handle the just "ESTABLISHED" event (e.g. do setsockopt
on the newly established sk). Right now, it is done by calling the
general purpose tcp_call_bpf().
In the later patch, it also needs to pass the just-received skb which
concludes the 3 way handshake. E.g. the SYNACK received at the active side.
The bpf prog can then learn some specific header options written by the
peer's bpf-prog and potentially do setsockopt on the newly established sk.
Thus, instead of reusing the general purpose tcp_call_bpf(), a new function
bpf_skops_established() is added to allow passing the "skb" to the bpf
prog. The actual skb passing from bpf_skops_established() to the bpf prog
will happen together in a later patch which has the necessary bpf pieces.
A "skb" arg is also added to tcp_init_transfer() such that
it can then be passed to bpf_skops_established().
Calling the new bpf_skops_established() instead of tcp_call_bpf()
should be a noop in this patch.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200820190039.2884750-1-kafai@fb.com
In a later patch, the bpf prog only wants to be called to handle
a header option if that particular header option cannot be handled by
the kernel. This unknown option could be written by the peer's bpf-prog.
It could also be a new standard option that the running kernel does not
support it while a bpf-prog can handle it.
This patch adds a "saw_unknown" bit to "struct tcp_options_received"
and it uses an existing one byte hole to do that. "saw_unknown" will
be set in tcp_parse_options() if it sees an option that the kernel
cannot handle.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200820190033.2884430-1-kafai@fb.com
This patch adds bpf_setsockopt(TCP_BPF_RTO_MIN) to allow bpf prog
to set the min rto of a connection. It could be used together
with the earlier patch which has added bpf_setsockopt(TCP_BPF_DELACK_MAX).
A later selftest patch will communicate the max delay ack in a
bpf tcp header option and then the receiving side can use
bpf_setsockopt(TCP_BPF_RTO_MIN) to set a shorter rto.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200820190027.2884170-1-kafai@fb.com
This change is mostly from an internal patch and adapts it from sysctl
config to the bpf_setsockopt setup.
The bpf_prog can set the max delay ack by using
bpf_setsockopt(TCP_BPF_DELACK_MAX). This max delay ack can be communicated
to its peer through bpf header option. The receiving peer can then use
this max delay ack and set a potentially lower rto by using
bpf_setsockopt(TCP_BPF_RTO_MIN) which will be introduced
in the next patch.
Another later selftest patch will also use it like the above to show
how to write and parse bpf tcp header option.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200820190021.2884000-1-kafai@fb.com
The TCP_SAVE_SYN has both the network header and tcp header.
The total length of the saved syn packet is currently stored in
the first 4 bytes (u32) of an array and the actual packet data is
stored after that.
A later patch will add a bpf helper that allows to get the tcp header
alone from the saved syn without the network header. It will be more
convenient to have a direct offset to a specific header instead of
re-parsing it. This requires to separately store the network hdrlen.
The total header length (i.e. network + tcp) is still needed for the
current usage in getsockopt. Although this total length can be obtained
by looking into the tcphdr and then get the (th->doff << 2), this patch
chooses to directly store the tcp hdrlen in the second four bytes of
this newly created "struct saved_syn". By using a new struct, it can
give a readable name to each individual header length.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200820190014.2883694-1-kafai@fb.com
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Don't flag SCTP heartbeat as invalid for re-used connections,
from Florian Westphal.
2) Bogus overlap report due to rbtree tree rotations, from Stefano Brivio.
3) Detect partial overlap with start end point match, also from Stefano.
4) Skip netlink dump of NFTA_SET_USERDATA is unset.
5) Incorrect nft_list_attributes enumeration definition.
6) Missing zeroing before memcpy to destination register, also
from Florian.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The l2tp subsystem now uses standard kernel logging APIs for
informational and warning messages, and tracepoints for debug
information.
Now that the tunnel and session debug flags are unused, remove the field
from the core structures.
Various system calls (in the case of l2tp_ppp) and netlink messages
handle the getting and setting of debug flags. To avoid userspace
breakage don't modify the API of these calls; simply ignore set
requests, and send dummy data for get requests.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All l2tp's informational and warning logging is now carried out using
standard kernel APIs.
Debugging information is now handled using tracepoints.
Now that no code is using the custom logging macros, remove them from
l2tp_core.h.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add lifetime event tracing for tunnel and session instances, tracking
tunnel and session registration, deletion, and eventual freeing.
Port the data path sequence number debug logging to use trace points
rather than custom debug macros.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp can provide a better debug experience using tracepoints rather than
printk-style logging.
Add tracepoint definitions in trace.h for use in the l2tp subsystem
code.
Add preprocessor definitions for the length of session and tunnel names
in l2tp_core.h so we can reuse these in trace.h.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The l2tp subsystem doesn't currently make use of tracepoints.
As a starting point for adding tracepoints, add skeleton infrastructure
for defining tracepoints for the subsystem, and for having them build
appropriately whether compiled into the kernel or built as a module.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The l2tp_* log wrappers only emit messages of a given category if the
tunnel or session structure has the appropriate flag set in its debug
field. Flags default to being unset.
For warning messages, this doesn't make a lot of sense since an
administrator is likely to want to know about datapath warnings without
needing to tweak the debug flags setting for a given tunnel or session
instance.
Modify l2tp_warn callsites to use pr_warn_ratelimited instead for
unconditional output of warning messages.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp_ppp in particular had a lot of log messages for tracing
[get|set]sockopt calls. These aren't especially useful, so remove
these messages.
Several log messages flagging error conditions were logged using
l2tp_info: they're better off as l2tp_warn.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp had logging to trace data frame receipt and transmission, including
code to dump packet contents. This was originally intended to aid
debugging of core l2tp packet handling, but is of limited use now that
code is stable.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert the uses of fallthrough comments to fallthrough macro.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow calling bpf_map_update_elem on sockmap and sockhash from a BPF
context. The synchronization required for this is a bit fiddly: we
need to prevent the socket from changing its state while we add it
to the sockmap, since we rely on getting a callback via
sk_prot->unhash. However, we can't just lock_sock like in
sock_map_sk_acquire because that might sleep. So instead we disable
softirq processing and use bh_lock_sock to prevent further
modification.
Yet, this is still not enough. BPF can be called in contexts where
the current CPU might have locked a socket. If the BPF can get
a hold of such a socket, inserting it into a sockmap would lead to
a deadlock. One straight forward example are sock_ops programs that
have ctx->sk, but the same problem exists for kprobes, etc.
We deal with this by allowing sockmap updates only from known safe
contexts. Improper usage is rejected by the verifier.
I've audited the enabled contexts to make sure they can't run in
a locked context. It's possible that CGROUP_SKB and others are
safe as well, but the auditing here is much more difficult. In
any case, we can extend the safe contexts when the need arises.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200821102948.21918-6-lmb@cloudflare.com
Don't go via map->ops to call sock_map_update_elem, since we know
what function to call in bpf_map_update_value. Since we currently
don't allow calling map_update_elem from BPF context, we can remove
ops->map_update_elem and rename the function to sock_map_update_elem_sys.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200821102948.21918-4-lmb@cloudflare.com
Merge the two very similar functions sock_map_update_elem and
sock_hash_update_elem into one.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200821102948.21918-3-lmb@cloudflare.com
Initializing psock->sk_proto and other saved callbacks is only
done in sk_psock_update_proto, after sk_psock_init has returned.
The logic for this is difficult to follow, and needlessly complex.
Instead, initialize psock->sk_proto whenever we allocate a new
psock. Additionally, assert the following invariants:
* The SK has no ULP: ULP does it's own finagling of sk->sk_prot
* sk_user_data is unused: we need it to store sk_psock
Protect our access to sk_user_data with sk_callback_lock, which
is what other users like reuseport arrays, etc. do.
The result is that an sk_psock is always fully initialized, and
that psock->sk_proto is always the "original" struct proto.
The latter allows us to use psock->sk_proto when initializing
IPv6 TCP / UDP callbacks for sockmap.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200821102948.21918-2-lmb@cloudflare.com
For bpf_map_elem and bpf_sk_local_storage bpf iterators,
additional map_id should be shown for fdinfo and
userspace query. For example, the following is for
a bpf_map_elem iterator.
$ cat /proc/1753/fdinfo/9
pos: 0
flags: 02000000
mnt_id: 14
link_type: iter
link_id: 34
prog_tag: 104be6d3fe45e6aa
prog_id: 173
target_name: bpf_map_elem
map_id: 127
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200821184419.574240-1-yhs@fb.com
Alexei Starovoitov says:
====================
pull-request: bpf 2020-08-21
The following pull-request contains BPF updates for your *net* tree.
We've added 11 non-merge commits during the last 5 day(s) which contain
a total of 12 files changed, 78 insertions(+), 24 deletions(-).
The main changes are:
1) three fixes in BPF task iterator logic, from Yonghong.
2) fix for compressed dwarf sections in vmlinux, from Jiri.
3) fix xdp attach regression, from Andrii.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Following bug was reported via irc:
nft list ruleset
set knock_candidates_ipv4 {
type ipv4_addr . inet_service
size 65535
elements = { 127.0.0.1 . 123,
127.0.0.1 . 123 }
}
..
udp dport 123 add @knock_candidates_ipv4 { ip saddr . 123 }
udp dport 123 add @knock_candidates_ipv4 { ip saddr . udp dport }
It should not have been possible to add a duplicate set entry.
After some debugging it turned out that the problem is the immediate
value (123) in the second-to-last rule.
Concatenations use 32bit registers, i.e. the elements are 8 bytes each,
not 6 and it turns out the kernel inserted
inet firewall @knock_candidates_ipv4
element 0100007f ffff7b00 : 0 [end]
element 0100007f 00007b00 : 0 [end]
Note the non-zero upper bits of the first element. It turns out that
nft_immediate doesn't zero the destination register, but this is needed
when the length isn't a multiple of 4.
Furthermore, the zeroing in nft_payload is broken. We can't use
[len / 4] = 0 -- if len is a multiple of 4, index is off by one.
Skip zeroing in this case and use a conditional instead of (len -1) / 4.
Fixes: 49499c3e6e ("netfilter: nf_tables: switch registers to 32 bit addressing")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Kernel sends an empty NFTA_SET_USERDATA attribute with no value if
userspace adds a set with no NFTA_SET_USERDATA attribute.
Fixes: e6d8ecac9e ("netfilter: nf_tables: Add new attributes into nft_set to store user data.")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Getting creative with nft and omitting the interval_overlap()
check from the set_overlap() function, without omitting
set_overlap() altogether, led to the observation of a partial
overlap that wasn't detected, and would actually result in
replacement of the end element of an existing interval.
This is due to the fact that we'll return -EEXIST on a matching,
pre-existing start element, instead of -ENOTEMPTY, and the error
is cleared by API if NLM_F_EXCL is not given. At this point, we
can insert a matching start, and duplicate the end element as long
as we don't end up into other intervals.
For instance, inserting interval 0 - 2 with an existing 0 - 3
interval would result in a single 0 - 2 interval, and a dangling
'3' end element. This is because nft will proceed after inserting
the '0' start element as no error is reported, and no further
conflicting intervals are detected on insertion of the end element.
This needs a different approach as it's a local condition that can
be detected by looking for duplicate ends coming from left and
right, separately. Track those and directly report -ENOTEMPTY on
duplicated end elements for a matching start.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Checks for partial overlaps on insertion assume that end elements
are always descendant nodes of their corresponding start, because
they are inserted later. However, this is not the case if a
previous delete operation caused a tree rotation as part of
rebalancing.
Taking the issue reported by Andreas Fischer as an example, if we
omit delete operations, the existing procedure works because,
equivalently, we are inserting a start item with value 40 in the
this region of the red-black tree with single-sized intervals:
overlap flag
10 (start)
/ \ false
20 (start)
/ \ false
30 (start)
/ \ false
60 (start)
/ \ false
50 (end)
/ \ false
20 (end)
/ \ false
40 (start)
if we now delete interval 30 - 30, the tree can be rearranged in
a way similar to this (note the rotation involving 50 - 50):
overlap flag
10 (start)
/ \ false
20 (start)
/ \ false
25 (start)
/ \ false
70 (start)
/ \ false
50 (end)
/ \ true (from rule a1.)
50 (start)
/ \ true
40 (start)
and we traverse interval 50 - 50 from the opposite direction
compared to what was expected.
To deal with those cases, add a start-before-start rule, b4.,
that covers traversal of existing intervals from the right.
We now need to restrict start-after-end rule b3. to cases
where there are no occurring nodes between existing start and
end elements, because addition of rule b4. isn't sufficient to
ensure that the pre-existing end element we encounter while
descending the tree corresponds to a start element of an
interval that we already traversed entirely.
Different types of overlap detection on trees with rotations
resulting from re-balancing will be covered by nft test case
sets/0044interval_overlap_1.
Reported-by: Andreas Fischer <netfilter@d9c.eu>
Bugzilla: https://bugzilla.netfilter.org/show_bug.cgi?id=1449
Cc: <stable@vger.kernel.org> # 5.6.x
Fixes: 7c84d41416 ("netfilter: nft_set_rbtree: Detect partial overlaps on insertion")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
b->media->send_msg() requires rcu_read_lock(), as we can see
elsewhere in tipc, tipc_bearer_xmit, tipc_bearer_xmit_skb
and tipc_bearer_bc_xmit().
Syzbot has reported this issue as:
net/tipc/bearer.c:466 suspicious rcu_dereference_check() usage!
Workqueue: cryptd cryptd_queue_worker
Call Trace:
tipc_l2_send_msg+0x354/0x420 net/tipc/bearer.c:466
tipc_aead_encrypt_done+0x204/0x3a0 net/tipc/crypto.c:761
cryptd_aead_crypt+0xe8/0x1d0 crypto/cryptd.c:739
cryptd_queue_worker+0x118/0x1b0 crypto/cryptd.c:181
process_one_work+0x94c/0x1670 kernel/workqueue.c:2269
worker_thread+0x64c/0x1120 kernel/workqueue.c:2415
kthread+0x3b5/0x4a0 kernel/kthread.c:291
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:293
So fix it by calling rcu_read_lock() in tipc_aead_encrypt_done()
for b->media->send_msg().
Fixes: fc1b6d6de2 ("tipc: introduce TIPC encryption & authentication")
Reported-by: syzbot+47bbc6b678d317cccbe0@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tcf_ct_handle_fragments() shouldn't free the skb when ip_defrag() call
fails. Otherwise, we will cause a double-free bug.
In such cases, just return the error to the caller.
Fixes: b57dc7c13e ("net/sched: Introduce action ct")
Signed-off-by: Alaa Hleihel <alaa@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The number of output and input streams was never being reduced, eg when
processing received INIT or INIT_ACK chunks.
The effect is that DATA chunks can be sent with invalid stream ids
and then discarded by the remote system.
Fixes: 2075e50caf ("sctp: convert to genradix")
Signed-off-by: David Laight <david.laight@aculab.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When receiving an IPv4 packet inside an IPv6 GRE packet, and the
IP6_TNL_F_RCV_DSCP_COPY flag is set on the tunnel, the IPv4 header would
get corrupted. This is due to the common ip6_tnl_rcv() function assuming
that the inner header is always IPv6. This patch checks the tunnel
protocol for IPv4 inner packets, but still defaults to IPv6.
Fixes: 308edfdf15 ("gre6: Cleanup GREv6 receive path, call common GRE functions")
Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Set IP protocol mask only when IP protocol field is set.
This will allow flow-type ether with vlan rule which don't have
protocol field to apply.
ethtool -N ens5f4 flow-type ether proto 0x8100 vlan 0x600\
m 0x1FFF action 3 loc 16
Signed-off-by: Vishal Kulkarni <vishal@chelsio.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, tcp sendmsg(MSG_ZEROCOPY) is building skbs with order-0 fragments.
Compared to standard sendmsg(), these skbs usually contain up to 16 fragments
on arches with 4KB page sizes, instead of two.
This adds considerable costs on various ndo_start_xmit() handlers,
especially when IOMMU is in the picture.
As high performance applications are often using huge pages,
we can try to combine adjacent pages belonging to same
compound page.
Tested on AMD Rome platform, with IOMMU, nominal single TCP flow speed
is roughly doubled (~55Gbit -> ~100Gbit), when user application
is using hugepages.
For reference, nominal single TCP flow speed on this platform
without MSG_ZEROCOPY is ~65Gbit.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7f0a838254 ("bpf, xdp: Maintain info on attached XDP BPF programs in net_device")
inadvertently changed which XDP mode is assumed when no mode flags are
specified explicitly. Previously, driver mode was preferred, if driver
supported it. If not, generic SKB mode was chosen. That commit changed default
to SKB mode always. This patch fixes the issue and restores the original
logic.
Fixes: 7f0a838254 ("bpf, xdp: Maintain info on attached XDP BPF programs in net_device")
Reported-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/bpf/20200820052841.1559757-1-andriin@fb.com
It's always 0. Note that we theoretically could use ~0U as well -
result will be the same modulo 0xffff, _if_ the damn thing did the
right thing for any value of initial sum; later we'll make use of
that when convenient.
However, unlike csum_and_copy_..._user(), there are instances that
did not work for arbitrary initial sums; c6x is one such.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
do csum_partial_copy_nocheck() on the first fragment, then
add the rest to it. Equivalent transformation.
That was the only caller of csum_partial_copy_nocheck() that
might pass it non-zero as the last argument.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
__smc_diag_dump() is potentially copying uninitialized kernel stack memory
into socket buffers, since the compiler may leave a 4-byte hole near the
beginning of `struct smcd_diag_dmbinfo`. Fix it by initializing `dinfo`
with memset().
Fixes: 4b1b7d3b30 ("net/smc: add SMC-D diag support")
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix rxrpc_kernel_get_srtt() to indicate the validity of the returned
smoothed RTT. If we haven't had any valid samples yet, the SRTT isn't
useful.
Fixes: c410bf0193 ("rxrpc: Fix the excessive initial retransmission timeout")
Signed-off-by: David Howells <dhowells@redhat.com>
The Rx protocol has a mechanism to help generate RTT samples that works by
a client transmitting a REQUESTED-type ACK when it receives a DATA packet
that has the REQUEST_ACK flag set.
The peer, however, may interpose other ACKs before transmitting the
REQUESTED-ACK, as can be seen in the following trace excerpt:
rxrpc_tx_data: c=00000044 DATA d0b5ece8:00000001 00000001 q=00000001 fl=07
rxrpc_rx_ack: c=00000044 00000001 PNG r=00000000 f=00000002 p=00000000 n=0
rxrpc_rx_ack: c=00000044 00000002 REQ r=00000001 f=00000002 p=00000001 n=0
...
DATA packet 1 (q=xx) has REQUEST_ACK set (bit 1 of fl=xx). The incoming
ping (labelled PNG) hard-acks the request DATA packet (f=xx exceeds the
sequence number of the DATA packet), causing it to be discarded from the Tx
ring. The ACK that was requested (labelled REQ, r=xx references the serial
of the DATA packet) comes after the ping, but the sk_buff holding the
timestamp has gone and the RTT sample is lost.
This is particularly noticeable on RPC calls used to probe the service
offered by the peer. A lot of peers end up with an unknown RTT because we
only ever sent a single RPC. This confuses the server rotation algorithm.
Fix this by caching the information about the outgoing packet in RTT
calculations in the rxrpc_call struct rather than looking in the Tx ring.
A four-deep buffer is maintained and both REQUEST_ACK-flagged DATA and
PING-ACK transmissions are recorded in there. When the appropriate
response ACK is received, the buffer is checked for a match and, if found,
an RTT sample is recorded.
If a received ACK refers to a packet with a later serial number than an
entry in the cache, that entry is presumed lost and the entry is made
available to record a new transmission.
ACKs types other than REQUESTED-type and PING-type cause any matching
sample to be cancelled as they don't necessarily represent a useful
measurement.
If there's no space in the buffer on ping/data transmission, the sample
base is discarded.
Fixes: 50235c4b5a ("rxrpc: Obtain RTT data by requesting ACKs on DATA packets")
Signed-off-by: David Howells <dhowells@redhat.com>
Add kernel module with user mode driver that populates bpffs with
BPF iterators.
$ mount bpffs /my/bpffs/ -t bpf
$ ls -la /my/bpffs/
total 4
drwxrwxrwt 2 root root 0 Jul 2 00:27 .
drwxr-xr-x 19 root root 4096 Jul 2 00:09 ..
-rw------- 1 root root 0 Jul 2 00:27 maps.debug
-rw------- 1 root root 0 Jul 2 00:27 progs.debug
The user mode driver will load BPF Type Formats, create BPF maps, populate BPF
maps, load two BPF programs, attach them to BPF iterators, and finally send two
bpf_link IDs back to the kernel.
The kernel will pin two bpf_links into newly mounted bpffs instance under
names "progs.debug" and "maps.debug". These two files become human readable.
$ cat /my/bpffs/progs.debug
id name attached
11 dump_bpf_map bpf_iter_bpf_map
12 dump_bpf_prog bpf_iter_bpf_prog
27 test_pkt_access
32 test_main test_pkt_access test_pkt_access
33 test_subprog1 test_pkt_access_subprog1 test_pkt_access
34 test_subprog2 test_pkt_access_subprog2 test_pkt_access
35 test_subprog3 test_pkt_access_subprog3 test_pkt_access
36 new_get_skb_len get_skb_len test_pkt_access
37 new_get_skb_ifindex get_skb_ifindex test_pkt_access
38 new_get_constant get_constant test_pkt_access
The BPF program dump_bpf_prog() in iterators.bpf.c is printing this data about
all BPF programs currently loaded in the system. This information is unstable
and will change from kernel to kernel as ".debug" suffix conveys.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200819042759.51280-4-alexei.starovoitov@gmail.com
If an sctp connection gets re-used, heartbeats are flagged as invalid
because their vtag doesn't match.
Handle this in a similar way as TCP conntrack when it suspects that the
endpoints and conntrack are out-of-sync.
When a HEARTBEAT request fails its vtag validation, flag this in the
conntrack state and accept the packet.
When a HEARTBEAT_ACK is received with an invalid vtag in the reverse
direction after we allowed such a HEARTBEAT through, assume we are
out-of-sync and re-set the vtag info.
v2: remove left-over snippet from an older incarnation that moved
new_state/old_state assignments, thats not needed so keep that
as-is.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Reason: A lot of the ptp drivers - which implement hardware time stamping - need
specific fields such as the sequence id from the ptp v2 header. Currently all
drivers implement that themselves.
Introduce a generic function to retrieve a pointer to the start of the ptp v2
header.
Suggested-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Evidently, when I did this previously, we didn't have more than
10 policies and didn't run into the reallocation path, because
it's missing a memset() for the unused policies. Fix that.
Fixes: d07dcf9aad ("netlink: add infrastructure to expose policies to userspace")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We've been warning about SO_BSDCOMPAT usage for many years. We may remove
this code completely now.
Suggested-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove linux/sunrpc/auth_gss.h which is included more than once
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The Kconfig help text contains the phrase "the the" in the help
text. Fix this and reformat the block of help text.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The legacy ethtool userspace tool shows an error when no features could
be changed. It's useful to have a netlink reply to be able to show this
error when __netdev_update_features wasn't called, for example:
1. ethtool -k eth0
large-receive-offload: off
2. ethtool -K eth0 rx-fcs on
3. ethtool -K eth0 lro on
Could not change any device features
rx-lro: off [requested on]
4. ethtool -K eth0 lro on
# The output should be the same, but without this patch the kernel
# doesn't send the reply, and ethtool is unable to detect the error.
This commit makes ethtool-netlink always return a reply when requested,
and it still avoids unnecessary calls to __netdev_update_features if the
wanted features haven't changed.
Fixes: 0980bfcd69 ("ethtool: set netdev features with FEATURES_SET request")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
ethtool-netlink ignores dev->hw_features and may confuse the drivers by
asking them to enable features not in the hw_features bitmask. For
example:
1. ethtool -k eth0
tls-hw-tx-offload: off [fixed]
2. ethtool -K eth0 tls-hw-tx-offload on
tls-hw-tx-offload: on
3. ethtool -k eth0
tls-hw-tx-offload: on [fixed]
Fitler out dev->hw_features from req_wanted to fix it and to resemble
the legacy ethtool behavior.
Fixes: 0980bfcd69 ("ethtool: set netdev features with FEATURES_SET request")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, ethtool-netlink calculates new wanted bits as:
(req_wanted & req_mask) | (old_active & ~req_mask)
It completely discards the old wanted bits, so they are forgotten with
the next ethtool command. Sample steps to reproduce:
1. ethtool -k eth0
tx-tcp-segmentation: on # TSO is on from the beginning
2. ethtool -K eth0 tx off
tx-tcp-segmentation: off [not requested]
3. ethtool -k eth0
tx-tcp-segmentation: off [requested on]
4. ethtool -K eth0 rx off # Some change unrelated to TSO
5. ethtool -k eth0
tx-tcp-segmentation: off # "Wanted on" is forgotten
This commit fixes it by changing the formula to:
(req_wanted & req_mask) | (old_wanted & ~req_mask),
where old_active was replaced by old_wanted to account for the wanted
bits.
The shortcut condition for the case where nothing was changed now
compares wanted bitmasks, instead of wanted to active.
Fixes: 0980bfcd69 ("ethtool: set netdev features with FEATURES_SET request")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch is to do 3 things for ipv6_dev_find():
As David A. noticed,
- rt6_lookup() is not really needed. Different from __ip_dev_find(),
ipv6_dev_find() doesn't have a compatibility problem, so remove it.
As Hideaki suggested,
- "valid" (non-tentative) check for the address is also needed.
ipv6_chk_addr() calls ipv6_chk_addr_and_flags(), which will
traverse the address hash list, but it's heavy to be called
inside ipv6_dev_find(). This patch is to reuse the code of
ipv6_chk_addr_and_flags() for ipv6_dev_find().
- dev parameter is passed into ipv6_dev_find(), as link-local
addresses from user space has sin6_scope_id set and the dev
lookup needs it.
Fixes: 81f6cb3122 ("ipv6: add ipv6_dev_find()")
Suggested-by: YOSHIFUJI Hideaki <hideaki.yoshifuji@miraclelinux.com>
Reported-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
pskb_carve_frag_list() may return -ENOMEM in pskb_carve_inside_nonlinear().
we should handle this correctly or we would get wrong sk_buff.
Fixes: 6fa01ccd88 ("skbuff: Add pskb_extract() helper function")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The frags of skb_shared_info of the data is assigned in following loop. It
is meaningless to do a memcpy of frags here.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert the uses of fallthrough comments to fallthrough macro.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add range validation for NLA_BINARY, allowing validation of any
combination of combination minimum or maximum lengths, using the
existing NLA_POLICY_RANGE()/NLA_POLICY_FULL_RANGE() macros, just
like for integers where the value is checked.
Also make NLA_POLICY_EXACT_LEN(), NLA_POLICY_EXACT_LEN_WARN()
and NLA_POLICY_MIN_LEN() special cases of this, removing the old
types NLA_EXACT_LEN and NLA_MIN_LEN.
This allows us to save some code where both minimum and maximum
lengths are requires, currently the policy only allows maximum
(NLA_BINARY), minimum (NLA_MIN_LEN) or exact (NLA_EXACT_LEN), so
a range of lengths cannot be accepted and must be checked by the
code that consumes the attributes later.
Also, this allows advertising the correct ranges in the policy
export to userspace. Here, NLA_MIN_LEN and NLA_EXACT_LEN already
were special cases of NLA_BINARY with min and min/max length
respectively.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change places that open-code NLA_POLICY_MIN_LEN() to
use the macro instead, giving us flexibility in how we
handle the details of the macro.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change places that open-code NLA_POLICY_EXACT_LEN() to
use the macro instead, giving us flexibility in how we
handle the details of the macro.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
batadv_bla_send_claim() gets called from worker thread context through
batadv_bla_periodic_work(), thus netif_rx_ni needs to be used in that
case. This fixes "NOHZ: local_softirq_pending 08" log messages seen
when batman-adv is enabled.
Fixes: 23721387c4 ("batman-adv: add basic bridge loop avoidance code")
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@haltian.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The own OGM check is currently misplaced and can lead to the following
issues:
For one thing we might receive an aggregated OGM from a neighbor node
which has our own OGM in the first place. We would then not only skip
our own OGM but erroneously also any other, following OGM in the
aggregate.
For another, we might receive an OGM aggregate which has our own OGM in
a place other then the first one. Then we would wrongly not skip this
OGM, leading to populating the orginator and gateway table with ourself.
Fixes: 9323158ef9 ("batman-adv: OGMv2 - implement originators logic")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The gateway client code can try to optimize the delivery of DHCP packets to
avoid broadcasting them through the whole mesh. But also transmissions to
the client can be optimized by looking up the destination via the chaddr of
the DHCP packet.
But the chaddr is currently only done when chaddr is fully inside the
non-paged area of the skbuff. Otherwise it will not be initialized and the
unoptimized path should have been taken.
But the implementation didn't handle this correctly. It didn't retrieve the
correct chaddr but still tried to perform the TT lookup with this
uninitialized memory.
Reported-by: syzbot+ab16e463b903f5a37036@syzkaller.appspotmail.com
Fixes: 6c413b1c22 ("batman-adv: send every DHCP packet as bat-unicast")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Acked-by: Antonio Quartulli <a@unstable.cc>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The commit c0842fbc1b ("random32: move the pseudo-random 32-bit
definitions to prandom.h") introduced a new header for the pseudo random
functions from (previously) linux/random.h. One future goal of the
prandom.h change is to make code to switch just the new header file and to
avoid the implicit include. This would allow the removal of the implicit
include from random.h
Signed-off-by: Sven Eckelmann <sven@narfation.org>
checkpatch found various instances of "Possible repeated word" in various
comments.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Delete the doubled word "time" in a comment.
Delete the doubled word "address" in a comment.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The function batadv_hardif_remove_interfaces was meant to remove all
interfaces which are currently in the list of known (compatible) hardifs
during module unload. But the function unregister_netdevice_notifier is
called in batadv_exit before batadv_hardif_remove_interfaces. This will
trigger NETDEV_UNREGISTER events for all available interfaces and in this
process remove all interfaces from batadv_hardif_list. And
batadv_hardif_remove_interfaces only operated on this (empty) list.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Pull networking fixes from David Miller:
"Another batch of fixes:
1) Remove nft_compat counter flush optimization, it generates warnings
from the refcount infrastructure. From Florian Westphal.
2) Fix BPF to search for build id more robustly, from Jiri Olsa.
3) Handle bogus getopt lengths in ebtables, from Florian Westphal.
4) Infoleak and other fixes to j1939 CAN driver, from Eric Dumazet and
Oleksij Rempel.
5) Reset iter properly on mptcp sendmsg() error, from Florian
Westphal.
6) Show a saner speed in bonding broadcast mode, from Jarod Wilson.
7) Various kerneldoc fixes in bonding and elsewhere, from Lee Jones.
8) Fix double unregister in bonding during namespace tear down, from
Cong Wang.
9) Disable RP filter during icmp_redirect selftest, from David Ahern"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (75 commits)
otx2_common: Use devm_kcalloc() in otx2_config_npa()
net: qrtr: fix usage of idr in port assignment to socket
selftests: disable rp_filter for icmp_redirect.sh
Revert "net: xdp: pull ethernet header off packet after computing skb->protocol"
phylink: <linux/phylink.h>: fix function prototype kernel-doc warning
mptcp: sendmsg: reset iter on error redux
net: devlink: Remove overzealous WARN_ON with snapshots
tipc: not enable tipc when ipv6 works as a module
tipc: fix uninit skb->data in tipc_nl_compat_dumpit()
net: Fix potential wrong skb->protocol in skb_vlan_untag()
net: xdp: pull ethernet header off packet after computing skb->protocol
ipvlan: fix device features
bonding: fix a potential double-unregister
can: j1939: add rxtimer for multipacket broadcast session
can: j1939: abort multipacket broadcast session when timeout occurs
can: j1939: cancel rxtimer on multipacket broadcast session complete
can: j1939: fix support for multipacket broadcast message
net: fddi: skfp: cfm: Remove seemingly unused variable 'ID_sccs'
net: fddi: skfp: cfm: Remove set but unused variable 'oldstate'
net: fddi: skfp: smt: Remove seemingly unused variable 'ID_sccs'
...
Passing large uint32 sockaddr_qrtr.port numbers for port allocation
triggers a warning within idr_alloc() since the port number is cast
to int, and thus interpreted as a negative number. This leads to
the rejection of such valid port numbers in qrtr_port_assign() as
idr_alloc() fails.
To avoid the problem, switch to idr_alloc_u32() instead.
Fixes: bdabad3e36 ("net: Add Qualcomm IPC router")
Reported-by: syzbot+f31428628ef672716ea8@syzkaller.appspotmail.com
Signed-off-by: Necip Fazil Yildiran <necip@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xiumei reported a bug with espintcp over IPv6 in transport mode,
because xfrm6_transport_finish expects to find IP6CB data (struct
inet6_skb_cb). Currently, espintcp zeroes the CB, but the relevant
part is actually preserved by previous layers (first set up by tcp,
then strparser only zeroes a small part of tcp_skb_tb), so we can just
relocate it to the start of skb->cb.
Fixes: e27cca96cd ("xfrm: add espintcp (RFC 8229)")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This fix wasn't correct: When this function is invoked from the
retransmission worker, the iterator contains garbage and resetting
it causes a crash.
As the work queue should not be performance critical also zero the
msghdr struct.
Fixes: 3575938313 "(mptcp: sendmsg: reset iter on error)"
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is possible to trigger this WARN_ON from user space by triggering a
devlink snapshot with an ID which already exists. We don't need both
-EEXISTS being reported and spamming the kernel log.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Chris Healy <cphealy@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When using ipv6_dev_find() in one module, it requires ipv6 not to
work as a module. Otherwise, this error occurs in build:
undefined reference to `ipv6_dev_find'.
So fix it by adding "depends on IPV6 || IPV6=n" to tipc/Kconfig,
as it does in sctp/Kconfig.
Fixes: 5a6f6f5791 ("tipc: set ub->ifindex for local ipv6 address")
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
__tipc_nl_compat_dumpit() has two callers, and it expects them to
pass a valid nlmsghdr via arg->data. This header is artificial and
crafted just for __tipc_nl_compat_dumpit().
tipc_nl_compat_publ_dump() does so by putting a genlmsghdr as well
as some nested attribute, TIPC_NLA_SOCK. But the other caller
tipc_nl_compat_dumpit() does not, this leaves arg->data uninitialized
on this call path.
Fix this by just adding a similar nlmsghdr without any payload in
tipc_nl_compat_dumpit().
This bug exists since day 1, but the recent commit 6ea67769ff
("net: tipc: prepare attrs in __tipc_nl_compat_dumpit()") makes it
easier to appear.
Reported-and-tested-by: syzbot+0e7181deafa7e0b79923@syzkaller.appspotmail.com
Fixes: d0796d1ef6 ("tipc: convert legacy nl bearer dump to nl compat")
Cc: Jon Maloy <jmaloy@redhat.com>
Cc: Ying Xue <ying.xue@windriver.com>
Cc: Richard Alpe <richard.alpe@ericsson.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Endianness issue in IPv4 option support in nft_exthdr,
from Stephen Suryaputra.
2) Removes the waitcount optimization in nft_compat,
from Florian Westphal.
3) Remove ipv6 -> nf_defrag_ipv6 module dependency, from
Florian Westphal.
4) Memleak in chain binding support, also from Florian.
5) Simplify nft_flowtable.sh selftest, from Fabian Frederick.
6) Optional MTU arguments for selftest nft_flowtable.sh,
also from Fabian.
7) Remove noise error report when killing process in
selftest nft_flowtable.sh, from Fabian Frederick.
8) Reject bogus getsockopt option length in ebtables,
from Florian Westphal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEK3kIWJt9yTYMP3ehqclaivrt76kFAl83p3MTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRCpyVqK+u3vqcsSB/9YMSKfcLUNv8eB/J3kPb4n6wlrBO8d
BLHGddA5+qVbki5Tx3rQ7qA+fj60v2bVWQYiwC4okBIE3h+uIi/vq+S+oYjA7ncA
E6bd0804AgKYbsGWaYMQOrOfVlLyJOk886XOsd2szkpopdPCdgHz45RVgx+wXkk/
4fUgeiGuBSNI7Kgei6w+OrMqB+dXyUZR5D0MePobVnN4vMjEZd4UsD6TAB3y4C3L
Ar9lAj/uPiiUEq/ow7J4kYtfw3DibMFM6JRAJ5+B7dXmBZ4TeAPxlG9XxmAKKHMX
R/QxkyZnkE3AIba6YHpIeYLQZyFa41363W5Z70rsA+fQ5Mig5jWXoNnY
=hWSB
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-5.9-20200815' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2020-08-15
this is a pull request of 4 patches for net/master.
All patches are by Zhang Changzhong and fix broadcast related problems in the
j1939 CAN networking stack.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We may access the two bytes after vlan_hdr in vlan_set_encap_proto(). So
we should pull VLAN_HLEN + sizeof(unsigned short) in skb_vlan_untag() or
we may access the wrong data.
Fixes: 0d5501c1c8 ("net: Always untag vlan-tagged traffic on input.")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When an XDP program changes the ethernet header protocol field,
eth_type_trans is used to recalculate skb->protocol. In order for
eth_type_trans to work correctly, the ethernet header must actually be
part of the skb data segment, so the code first pushes that onto the
head of the skb. However, it subsequently forgets to pull it back off,
making the behavior of the passed-on packet inconsistent between the
protocol modifying case and the static protocol case. This patch fixes
the issue by simply pulling the ethernet header back off of the skb
head.
Fixes: 2972495699 ("net: fix generic XDP to handle if eth header was mangled")
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- some code cleanup
- a couple of static analysis fixes
- setattr: try to pick a fid associated with the file rather than the
dentry, which might sometimes matter
-----BEGIN PGP SIGNATURE-----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=hwGq
-----END PGP SIGNATURE-----
Merge tag '9p-for-5.9-rc1' of git://github.com/martinetd/linux
Pull 9p updates from Dominique Martinet:
- some code cleanup
- a couple of static analysis fixes
- setattr: try to pick a fid associated with the file rather than the
dentry, which might sometimes matter
* tag '9p-for-5.9-rc1' of git://github.com/martinetd/linux:
9p: Remove unneeded cast from memory allocation
9p: remove unused code in 9p
net/9p: Fix sparse endian warning in trans_fd.c
9p: Fix memory leak in v9fs_mount
9p: retrieve fid from file when file instance exist.
Highlights include:
Stable fixes:
- pNFS: Don't return layout segments that are being used for I/O
- pNFS: Don't move layout segments off the active list when being used for I/O
Features:
- NFS: Add support for user xattrs through the NFSv4.2 protocol
- NFS: Allow applications to speed up readdir+statx() using AT_STATX_DONT_SYNC
- NFSv4.0 allow nconnect for v4.0
Bugfixes and cleanups:
- nfs: ensure correct writeback errors are returned on close()
- nfs: nfs_file_write() should check for writeback errors
- nfs: Fix getxattr kernel panic and memory overflow
- NFS: Fix the pNFS/flexfiles mirrored read failover code
- SUNRPC: dont update timeout value on connection reset
- freezer: Add unsafe versions of freezable_schedule_timeout_interruptible for NFS
- sunrpc: destroy rpc_inode_cachep after unregister_filesystem
-----BEGIN PGP SIGNATURE-----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=k4pE
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-5.9-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Stable fixes:
- pNFS: Don't return layout segments that are being used for I/O
- pNFS: Don't move layout segments off the active list when being used for I/O
Features:
- NFS: Add support for user xattrs through the NFSv4.2 protocol
- NFS: Allow applications to speed up readdir+statx() using AT_STATX_DONT_SYNC
- NFSv4.0 allow nconnect for v4.0
Bugfixes and cleanups:
- nfs: ensure correct writeback errors are returned on close()
- nfs: nfs_file_write() should check for writeback errors
- nfs: Fix getxattr kernel panic and memory overflow
- NFS: Fix the pNFS/flexfiles mirrored read failover code
- SUNRPC: dont update timeout value on connection reset
- freezer: Add unsafe versions of freezable_schedule_timeout_interruptible for NFS
- sunrpc: destroy rpc_inode_cachep after unregister_filesystem"
* tag 'nfs-for-5.9-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (32 commits)
NFS: Fix flexfiles read failover
fs: nfs: delete repeated words in comments
rpc_pipefs: convert comma to semicolon
nfs: Fix getxattr kernel panic and memory overflow
NFS: Don't return layout segments that are in use
NFS: Don't move layouts to plh_return_segs list while in use
NFS: Add layout segment info to pnfs read/write/commit tracepoints
NFS: Add tracepoints for layouterror and layoutstats.
NFS: Report the stateid + status in trace_nfs4_layoutreturn_on_close()
SUNRPC dont update timeout value on connection reset
nfs: nfs_file_write() should check for writeback errors
nfs: ensure correct writeback errors are returned on close()
NFSv4.2: xattr cache: get rid of cache discard work queue
NFS: remove redundant initialization of variable result
NFSv4.0 allow nconnect for v4.0
freezer: Add unsafe versions of freezable_schedule_timeout_interruptible for NFS
sunrpc: destroy rpc_inode_cachep after unregister_filesystem
NFSv4.2: add client side xattr caching.
NFSv4.2: hook in the user extended attribute handlers
NFSv4.2: add the extended attribute proc functions.
...
According to SAE J1939/21 (Chapter 5.12.3 and APPENDIX C), for transmit side
the required time interval between packets of a multipacket broadcast message
is 50 to 200 ms, the responder shall use a timeout of 250ms (provides margin
allowing for the maximumm spacing of 200ms). For receive side a timeout will
occur when a time of greater than 750 ms elapsed between two message packets
when more packets were expected.
So this patch fix and add rxtimer for multipacket broadcast session.
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1596599425-5534-5-git-send-email-zhangchangzhong@huawei.com
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
If timeout occurs, j1939_tp_rxtimer() first calls hrtimer_start() to restart
rxtimer, and then calls __j1939_session_cancel() to set session->state =
J1939_SESSION_WAITING_ABORT. At next timeout expiration, because of the
J1939_SESSION_WAITING_ABORT session state j1939_tp_rxtimer() will call
j1939_session_deactivate_activate_next() to deactivate current session, and
rxtimer won't be set.
But for multipacket broadcast session, __j1939_session_cancel() don't set
session->state = J1939_SESSION_WAITING_ABORT, thus current session won't be
deactivate and hrtimer_start() is called to start new rxtimer again and again.
So fix it by moving session->state = J1939_SESSION_WAITING_ABORT out of if
(!j1939_cb_is_broadcast(&session->skcb)) statement.
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1596599425-5534-4-git-send-email-zhangchangzhong@huawei.com
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
If j1939_xtp_rx_dat_one() receive last frame of multipacket broadcast message,
j1939_session_timers_cancel() should be called to cancel rxtimer.
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1596599425-5534-3-git-send-email-zhangchangzhong@huawei.com
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Currently j1939_tp_im_involved_anydir() in j1939_tp_recv() check the previously
set flags J1939_ECU_LOCAL_DST and J1939_ECU_LOCAL_SRC of incoming skb, thus
multipacket broadcast message was aborted by receive side because it may come
from remote ECUs and have no exact dst address. Similarly, j1939_tp_cmd_recv()
and j1939_xtp_rx_dat() didn't process broadcast message.
So fix it by checking and process broadcast message in j1939_tp_recv(),
j1939_tp_cmd_recv() and j1939_xtp_rx_dat().
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1596599425-5534-2-git-send-email-zhangchangzhong@huawei.com
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Daniel Borkmann says:
====================
pull-request: bpf 2020-08-15
The following pull-request contains BPF updates for your *net* tree.
We've added 23 non-merge commits during the last 4 day(s) which contain
a total of 32 files changed, 421 insertions(+), 141 deletions(-).
The main changes are:
1) Fix sock_ops ctx access splat due to register override, from John Fastabend.
2) Batch of various fixes to libbpf, bpftool, and selftests when testing build
in 32-bit mode, from Andrii Nakryiko.
3) Fix vmlinux.h generation on ARM by mapping GCC built-in types (__Poly*_t)
to equivalent ones clang can work with, from Jean-Philippe Brucker.
4) Fix build_id lookup in bpf_get_stackid() helper by walking all NOTE ELF
sections instead of just first, from Jiri Olsa.
5) Avoid use of __builtin_offsetof() in libbpf for CO-RE, from Yonghong Song.
6) Fix segfault in test_mmap due to inconsistent length params, from Jianlin Lv.
7) Don't override errno in libbpf when logging errors, from Toke Høiland-Jørgensen.
8) Fix v4_to_v6 sockaddr conversion in sk_lookup test, from Stanislav Fomichev.
9) Add link to bpf-helpers(7) man page to BPF doc, from Joe Stringer.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Once we've copied data from the iterator we need to revert in case we
end up not sending any data.
This bug doesn't trigger with normal 'poll' based tests, because
we only feed a small chunk of data to kernel after poll indicated
POLLOUT. With blocking IO and large writes this triggers. Receiver
ends up with less data than it should get.
Fixes: 72511aab95 ("mptcp: avoid blocking in tcp_sendpages")
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEK3kIWJt9yTYMP3ehqclaivrt76kFAl82a18THG1rbEBwZW5n
dXRyb25peC5kZQAKCRCpyVqK+u3vqVbYB/9wF0ekQk66ES0PlIKkTDqDlt8hH8gN
a86yOFow3jjOWOlol1wDyCqh4i+JD0PgRPTCmXJoFYfXUsNwjRQt2ZqVgOlS0dR3
wmxxNw0i7SQ3+LDEf3Dofgk39Y5+VSQGfT3fvM8FfHWi9Mkxmswi2EwCBMx7Cqyp
lghxsJyZoeSnwfx7Wcel75NnYID1WscKUyXR6Qd240V1h7s3oAt6ZdDnYLPJnd7M
zeRSY+HgDa98HBUMmQi627douQcTtXyE5Zpx/PkkRGEOYIS/SEF8XmA2cQ0Vu8R/
R/u/htBqoV7OlL5XdyH1l2+HDOu0M1EKZiNWYMV34yobUqkrGg0oiJut
=NuYv
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-5.9-20200814' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2020-08-14
this is a pull request of 6 patches for net/master. All patches fix problems in
the j1939 CAN networking stack.
The first patch is by Eric Dumazet fixes a kernel-infoleak in
j1939_sk_sock2sockaddr_can().
The remaining 5 patches are by Oleksij Rempel and fix recption of j1939
messages not orginated by the stack, a use-after-free in j1939_tp_txtimer(),
ensure that the CAN driver has a ml_priv allocated. These problem were found by
google's syzbot. Further ETP sessions with block size of less than 255 are
fixed and a sanity check was added to j1939_xtp_rx_dat_one() to detect packet
corruption.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the stack relays on receiving own packets, it was overwriting own
transmit buffer from received packets.
At least theoretically, the received echo buffer can be corrupt or
changed and the session partner can request to resend previous data. In
this case we will re-send bad data.
With this patch we will stop to overwrite own TX buffer and use it for
sanity checking.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20200807105200.26441-6-o.rempel@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Sometimes it makes no sense to search the skb by pkt.dpo, since we need
next the skb within the transaction block. This may happen if we have an
ETP session with CTS set to less than 255 packets.
After this patch, we will be able to work with ETP sessions where the
block size (ETP.CM_CTS byte 2) is less than 255 packets.
Reported-by: Henrique Figueira <henrislip@gmail.com>
Reported-by: https://github.com/linux-can/can-utils/issues/228
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20200807105200.26441-5-o.rempel@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch adds check to ensure that the struct net_device::ml_priv is
allocated, as it is used later by the j1939 stack.
The allocation is done by all mainline CAN network drivers, but when using
bond or team devices this is not the case.
Bail out if no ml_priv is allocated.
Reported-by: syzbot+f03d384f3455d28833eb@syzkaller.appspotmail.com
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Cc: linux-stable <stable@vger.kernel.org> # >= v5.4
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20200807105200.26441-4-o.rempel@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The current stack implementation do not support ECTS requests of not
aligned TP sized blocks.
If ECTS will request a block with size and offset spanning two TP
blocks, this will cause memcpy() to read beyond the queued skb (which
does only contain one TP sized block).
Sometimes KASAN will detect this read if the memory region beyond the
skb was previously allocated and freed. In other situations it will stay
undetected. The ETP transfer in any case will be corrupted.
This patch adds a sanity check to avoid this kind of read and abort the
session with error J1939_XTP_ABORT_ECTS_TOO_BIG.
Reported-by: syzbot+5322482fe520b02aea30@syzkaller.appspotmail.com
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Cc: linux-stable <stable@vger.kernel.org> # >= v5.4
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20200807105200.26441-3-o.rempel@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In current J1939 stack implementation, we process all locally send
messages as own messages. Even if it was send by CAN_RAW socket.
To reproduce it use following commands:
testj1939 -P -r can0:0x80 &
cansend can0 18238040#0123
This step will trigger false positive not critical warning:
j1939_simple_recv: Received already invalidated message
With this patch we add additional check to make sure, related skb is own
echo message.
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20200807105200.26441-2-o.rempel@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
syzkaller reports splat:
------------[ cut here ]------------
Buffer overflow detected (80 < 137)!
Call Trace:
do_ebt_get_ctl+0x2b4/0x790 net/bridge/netfilter/ebtables.c:2317
nf_getsockopt+0x72/0xd0 net/netfilter/nf_sockopt.c:116
ip_getsockopt net/ipv4/ip_sockglue.c:1778 [inline]
caused by a copy-to-user with a too-large "*len" value.
This adds a argument check on *len just like in the non-compat version
of the handler.
Before the "Fixes" commit, the reproducer fails with -EINVAL as
expected:
1. core calls the "compat" getsockopt version
2. compat getsockopt version detects the *len value is possibly
in 64-bit layout (*len != compat_len)
3. compat getsockopt version delegates everything to native getsockopt
version
4. native getsockopt rejects invalid *len
-> compat handler only sees len == sizeof(compat_struct) for GET_ENTRIES.
After the refactor, event sequence is:
1. getsockopt calls "compat" version (len != native_len)
2. compat version attempts to copy *len bytes, where *len is random
value from userspace
Fixes: fc66de8e16 ("netfilter/ebtables: clean up compat {get, set}sockopt handling")
Reported-by: syzbot+5accb5c62faa1d346480@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pull networking fixes from David Miller:
"Some merge window fallout, some longer term fixes:
1) Handle headroom properly in lapbether and x25_asy drivers, from
Xie He.
2) Fetch MAC address from correct r8152 device node, from Thierry
Reding.
3) In the sw kTLS path we should allow MSG_CMSG_COMPAT in sendmsg,
from Rouven Czerwinski.
4) Correct fdputs in socket layer, from Miaohe Lin.
5) Revert troublesome sockptr_t optimization, from Christoph Hellwig.
6) Fix TCP TFO key reading on big endian, from Jason Baron.
7) Missing CAP_NET_RAW check in nfc, from Qingyu Li.
8) Fix inet fastreuse optimization with tproxy sockets, from Tim
Froidcoeur.
9) Fix 64-bit divide in new SFC driver, from Edward Cree.
10) Add a tracepoint for prandom_u32 so that we can more easily
perform usage analysis. From Eric Dumazet.
11) Fix rwlock imbalance in AF_PACKET, from John Ogness"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (49 commits)
net: openvswitch: introduce common code for flushing flows
af_packet: TPACKET_V3: fix fill status rwlock imbalance
random32: add a tracepoint for prandom_u32()
Revert "ipv4: tunnel: fix compilation on ARCH=um"
net: accept an empty mask in /sys/class/net/*/queues/rx-*/rps_cpus
net: ethernet: stmmac: Disable hardware multicast filter
net: stmmac: dwmac1000: provide multicast filter fallback
ipv4: tunnel: fix compilation on ARCH=um
vsock: fix potential null pointer dereference in vsock_poll()
sfc: fix ef100 design-param checking
net: initialize fastreuse on inet_inherit_port
net: refactor bind_bucket fastreuse into helper
net: phy: marvell10g: fix null pointer dereference
net: Fix potential memory leak in proto_register()
net: qcom/emac: add missed clk_disable_unprepare in error path of emac_clks_phase1_init
ionic_lif: Use devm_kcalloc() in ionic_qcq_alloc()
net/nfc/rawsock.c: add CAP_NET_RAW check.
hinic: fix strncpy output truncated compile warnings
drivers/net/wan/x25_asy: Added needed_headroom and a skb->len check
net/tls: Fix kmap usage
...
To avoid some issues, for example RCU usage warning and double free,
we should flush the flows under ovs_lock. This patch refactors
table_instance_destroy and introduces table_instance_flow_flush
which can be invoked by __dp_destroy or ovs_flow_tbl_flush.
Fixes: 50b0e61b32 ("net: openvswitch: fix possible memleak on destroy flow-table")
Reported-by: Johan Knöös <jknoos@google.com>
Reported-at: https://mail.openvswitch.org/pipermail/ovs-discuss/2020-August/050489.html
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After @blk_fill_in_prog_lock is acquired there is an early out vnet
situation that can occur. In that case, the rwlock needs to be
released.
Also, since @blk_fill_in_prog_lock is only acquired when @tp_version
is exactly TPACKET_V3, only release it on that exact condition as
well.
And finally, add sparse annotation so that it is clearer that
prb_fill_curr_block() and prb_clear_blk_fill_status() are acquiring
and releasing @blk_fill_in_prog_lock, respectively. sparse is still
unable to understand the balance, but the warnings are now on a
higher level that make more sense.
Fixes: 632ca50f2c ("af_packet: TPACKET_V3: replace busy-wait loop")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to patch ("bpf: sock_ops ctx access may stomp registers") if the
src_reg = dst_reg when reading the sk field of a sock_ops struct we
generate xlated code,
53: (61) r9 = *(u32 *)(r9 +28)
54: (15) if r9 == 0x0 goto pc+3
56: (79) r9 = *(u64 *)(r9 +0)
This stomps on the r9 reg to do the sk_fullsock check and then when
reading the skops->sk field instead of the sk pointer we get the
sk_fullsock. To fix use similar pattern noted in the previous fix
and use the temp field to save/restore a register used to do
sk_fullsock check.
After the fix the generated xlated code reads,
52: (7b) *(u64 *)(r9 +32) = r8
53: (61) r8 = *(u32 *)(r9 +28)
54: (15) if r9 == 0x0 goto pc+3
55: (79) r8 = *(u64 *)(r9 +32)
56: (79) r9 = *(u64 *)(r9 +0)
57: (05) goto pc+1
58: (79) r8 = *(u64 *)(r9 +32)
Here r9 register was in-use so r8 is chosen as the temporary register.
In line 52 r8 is saved in temp variable and at line 54 restored in case
fullsock != 0. Finally we handle fullsock == 0 case by restoring at
line 58.
This adds a new macro SOCK_OPS_GET_SK it is almost possible to merge
this with SOCK_OPS_GET_FIELD, but I found the extra branch logic a
bit more confusing than just adding a new macro despite a bit of
duplicating code.
Fixes: 1314ef5611 ("bpf: export bpf_sock for BPF_PROG_TYPE_SOCK_OPS prog type")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/159718349653.4728.6559437186853473612.stgit@john-Precision-5820-Tower
I had a sockmap program that after doing some refactoring started spewing
this splat at me:
[18610.807284] BUG: unable to handle kernel NULL pointer dereference at 0000000000000001
[...]
[18610.807359] Call Trace:
[18610.807370] ? 0xffffffffc114d0d5
[18610.807382] __cgroup_bpf_run_filter_sock_ops+0x7d/0xb0
[18610.807391] tcp_connect+0x895/0xd50
[18610.807400] tcp_v4_connect+0x465/0x4e0
[18610.807407] __inet_stream_connect+0xd6/0x3a0
[18610.807412] ? __inet_stream_connect+0x5/0x3a0
[18610.807417] inet_stream_connect+0x3b/0x60
[18610.807425] __sys_connect+0xed/0x120
After some debugging I was able to build this simple reproducer,
__section("sockops/reproducer_bad")
int bpf_reproducer_bad(struct bpf_sock_ops *skops)
{
volatile __maybe_unused __u32 i = skops->snd_ssthresh;
return 0;
}
And along the way noticed that below program ran without splat,
__section("sockops/reproducer_good")
int bpf_reproducer_good(struct bpf_sock_ops *skops)
{
volatile __maybe_unused __u32 i = skops->snd_ssthresh;
volatile __maybe_unused __u32 family;
compiler_barrier();
family = skops->family;
return 0;
}
So I decided to check out the code we generate for the above two
programs and noticed each generates the BPF code you would expect,
0000000000000000 <bpf_reproducer_bad>:
; volatile __maybe_unused __u32 i = skops->snd_ssthresh;
0: r1 = *(u32 *)(r1 + 96)
1: *(u32 *)(r10 - 4) = r1
; return 0;
2: r0 = 0
3: exit
0000000000000000 <bpf_reproducer_good>:
; volatile __maybe_unused __u32 i = skops->snd_ssthresh;
0: r2 = *(u32 *)(r1 + 96)
1: *(u32 *)(r10 - 4) = r2
; family = skops->family;
2: r1 = *(u32 *)(r1 + 20)
3: *(u32 *)(r10 - 8) = r1
; return 0;
4: r0 = 0
5: exit
So we get reasonable assembly, but still something was causing the null
pointer dereference. So, we load the programs and dump the xlated version
observing that line 0 above 'r* = *(u32 *)(r1 +96)' is going to be
translated by the skops access helpers.
int bpf_reproducer_bad(struct bpf_sock_ops * skops):
; volatile __maybe_unused __u32 i = skops->snd_ssthresh;
0: (61) r1 = *(u32 *)(r1 +28)
1: (15) if r1 == 0x0 goto pc+2
2: (79) r1 = *(u64 *)(r1 +0)
3: (61) r1 = *(u32 *)(r1 +2340)
; volatile __maybe_unused __u32 i = skops->snd_ssthresh;
4: (63) *(u32 *)(r10 -4) = r1
; return 0;
5: (b7) r0 = 0
6: (95) exit
int bpf_reproducer_good(struct bpf_sock_ops * skops):
; volatile __maybe_unused __u32 i = skops->snd_ssthresh;
0: (61) r2 = *(u32 *)(r1 +28)
1: (15) if r2 == 0x0 goto pc+2
2: (79) r2 = *(u64 *)(r1 +0)
3: (61) r2 = *(u32 *)(r2 +2340)
; volatile __maybe_unused __u32 i = skops->snd_ssthresh;
4: (63) *(u32 *)(r10 -4) = r2
; family = skops->family;
5: (79) r1 = *(u64 *)(r1 +0)
6: (69) r1 = *(u16 *)(r1 +16)
; family = skops->family;
7: (63) *(u32 *)(r10 -8) = r1
; return 0;
8: (b7) r0 = 0
9: (95) exit
Then we look at lines 0 and 2 above. In the good case we do the zero
check in r2 and then load 'r1 + 0' at line 2. Do a quick cross-check
into the bpf_sock_ops check and we can confirm that is the 'struct
sock *sk' pointer field. But, in the bad case,
0: (61) r1 = *(u32 *)(r1 +28)
1: (15) if r1 == 0x0 goto pc+2
2: (79) r1 = *(u64 *)(r1 +0)
Oh no, we read 'r1 +28' into r1, this is skops->fullsock and then in
line 2 we read the 'r1 +0' as a pointer. Now jumping back to our spat,
[18610.807284] BUG: unable to handle kernel NULL pointer dereference at 0000000000000001
The 0x01 makes sense because that is exactly the fullsock value. And
its not a valid dereference so we splat.
To fix we need to guard the case when a program is doing a sock_ops field
access with src_reg == dst_reg. This is already handled in the load case
where the ctx_access handler uses a tmp register being careful to
store the old value and restore it. To fix the get case test if
src_reg == dst_reg and in this case do the is_fullsock test in the
temporary register. Remembering to restore the temporary register before
writing to either dst_reg or src_reg to avoid smashing the pointer into
the struct holding the tmp variable.
Adding this inline code to test_tcpbpf_kern will now be generated
correctly from,
9: r2 = *(u32 *)(r2 + 96)
to xlated code,
12: (7b) *(u64 *)(r2 +32) = r9
13: (61) r9 = *(u32 *)(r2 +28)
14: (15) if r9 == 0x0 goto pc+4
15: (79) r9 = *(u64 *)(r2 +32)
16: (79) r2 = *(u64 *)(r2 +0)
17: (61) r2 = *(u32 *)(r2 +2348)
18: (05) goto pc+1
19: (79) r9 = *(u64 *)(r2 +32)
And in the normal case we keep the original code, because really this
is an edge case. From this,
9: r2 = *(u32 *)(r6 + 96)
to xlated code,
22: (61) r2 = *(u32 *)(r6 +28)
23: (15) if r2 == 0x0 goto pc+2
24: (79) r2 = *(u64 *)(r6 +0)
25: (61) r2 = *(u32 *)(r2 +2348)
So three additional instructions if dst == src register, but I scanned
my current code base and did not see this pattern anywhere so should
not be a big deal. Further, it seems no one else has hit this or at
least reported it so it must a fairly rare pattern.
Fixes: 9b1f3d6e5a ("bpf: Refactor sock_ops_convert_ctx_access")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/159718347772.4728.2781381670567919577.stgit@john-Precision-5820-Tower
syzbot found a memory leak in nf_tables_addchain() because the chain
object is not free'd correctly on error.
Fixes: d0e2c7de92 ("netfilter: nf_tables: add NFT_CHAIN_BINDING")
Reported-by: syzbot+c99868fde67014f7e9f5@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
nf_ct_frag6_gather is part of nf_defrag_ipv6.ko, not ipv6 core.
The current use of the netfilter ipv6 stub indirections causes a module
dependency between ipv6 and nf_defrag_ipv6.
This prevents nf_defrag_ipv6 module from being removed because ipv6 can't
be unloaded.
Remove the indirection and always use a direct call. This creates a
depency from nf_conntrack_bridge to nf_defrag_ipv6 instead:
modinfo nf_conntrack
depends: nf_conntrack,nf_defrag_ipv6,bridge
.. and nf_conntrack already depends on nf_defrag_ipv6 anyway.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Enforce XDP_FLAGS_UPDATE_IF_NOEXIST only if new BPF program to be attached is
non-NULL (i.e., we are not detaching a BPF program).
Fixes: d4baa9368a ("bpf, xdp: Extract common XDP program attachment logic")
Reported-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20200812022923.1217922-1-andriin@fb.com
This reverts commit 06a7a37be5.
The bug was already fixed, this added a dup include.
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We must accept an empty mask in store_rps_map(), or we are not able
to disable RPS on a queue.
Fixes: 07bbecb341 ("net: Restrict receive packets queuing to housekeeping CPUs")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Maciej Żenczykowski <maze@google.com>
Cc: Alex Belits <abelits@marvell.com>
Cc: Nitesh Narayan Lal <nitesh@redhat.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Nitesh Narayan Lal <nitesh@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With certain configurations, a 64-bit ARCH=um errors
out here with an unknown csum_ipv6_magic() function.
Include the right header file to always have it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
syzbot reported this issue where in the vsock_poll() we find the
socket state at TCP_ESTABLISHED, but 'transport' is null:
general protection fault, probably for non-canonical address 0xdffffc0000000012: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000090-0x0000000000000097]
CPU: 0 PID: 8227 Comm: syz-executor.2 Not tainted 5.8.0-rc7-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:vsock_poll+0x75a/0x8e0 net/vmw_vsock/af_vsock.c:1038
Call Trace:
sock_poll+0x159/0x460 net/socket.c:1266
vfs_poll include/linux/poll.h:90 [inline]
do_pollfd fs/select.c:869 [inline]
do_poll fs/select.c:917 [inline]
do_sys_poll+0x607/0xd40 fs/select.c:1011
__do_sys_poll fs/select.c:1069 [inline]
__se_sys_poll fs/select.c:1057 [inline]
__x64_sys_poll+0x18c/0x440 fs/select.c:1057
do_syscall_64+0x60/0xe0 arch/x86/entry/common.c:384
entry_SYSCALL_64_after_hwframe+0x44/0xa9
This issue can happen if the TCP_ESTABLISHED state is set after we read
the vsk->transport in the vsock_poll().
We could put barriers to synchronize, but this can only happen during
connection setup, so we can simply check that 'transport' is valid.
Fixes: c0cfa2d8a7 ("vsock: add multi-transports support")
Reported-and-tested-by: syzbot+a61bac2fcc1a7c6623fe@syzkaller.appspotmail.com
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sent to all available MDSes once per second now. Other than that, we
have a lot of fixes and cleanups all around the filesystem, including
a tweak to cut down on MDS request resends in multi-MDS setups from
Yanhu and fixups for SELinux symlink labeling and MClientSession
message decoding from Jeff.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAl80I3MTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi7rlB/4/tegnfsB+O6MQPt+DkSxjQ6+90J/O
aDj3jnwHoUBUitTP92wHdy/TanlZMX0UQqq4caWt1Ot0Rveb6XTfTIzEDtG2ejYQ
dcH6LB3dS9Qvjrwh7oRawx8Xux/RdIIA99OvAX7K+4IeLKP5PjmwfdM1Mm0agfoS
V8qXm8cGyqF2lWown092Znr8s6OSsDEaUbjB2tlz5msWeK9rSFD5bDYOBdOTkBCU
5v5BIUwWWoU9YFMWDJgVNS5l2Scq5yTDEleZcCCJMovKNrhBi9DcwUDKrDQJ3+5v
UmfI5M/L99Ng7yAcPqbeOZ1HibuOrdmqAoR6lCiD+PPEPrf99rVLRinQ
=2NtI
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.9-rc1' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"Xiubo has completed his work on filesystem client metrics, they are
sent to all available MDSes once per second now.
Other than that, we have a lot of fixes and cleanups all around the
filesystem, including a tweak to cut down on MDS request resends in
multi-MDS setups from Yanhu and fixups for SELinux symlink labeling
and MClientSession message decoding from Jeff"
* tag 'ceph-for-5.9-rc1' of git://github.com/ceph/ceph-client: (22 commits)
ceph: handle zero-length feature mask in session messages
ceph: use frag's MDS in either mode
ceph: move sb->wb_pagevec_pool to be a global mempool
ceph: set sec_context xattr on symlink creation
ceph: remove redundant initialization of variable mds
ceph: fix use-after-free for fsc->mdsc
ceph: remove unused variables in ceph_mdsmap_decode()
ceph: delete repeated words in fs/ceph/
ceph: send client provided metric flags in client metadata
ceph: periodically send perf metrics to MDSes
ceph: check the sesion state and return false in case it is closed
libceph: replace HTTP links with HTTPS ones
ceph: remove unnecessary cast in kfree()
libceph: just have osd_req_op_init() return a pointer
ceph: do not access the kiocb after aio requests
ceph: clean up and optimize ceph_check_delayed_caps()
ceph: fix potential mdsc use-after-free crash
ceph: switch to WARN_ON_ONCE in encode_supported_features()
ceph: add global total_caps to count the mdsc's total caps number
ceph: add check_session_state() helper and make it global
...
In the case of TPROXY, bind_conflict optimizations for SO_REUSEADDR or
SO_REUSEPORT are broken, possibly resulting in O(n) instead of O(1) bind
behaviour or in the incorrect reuse of a bind.
the kernel keeps track for each bind_bucket if all sockets in the
bind_bucket support SO_REUSEADDR or SO_REUSEPORT in two fastreuse flags.
These flags allow skipping the costly bind_conflict check when possible
(meaning when all sockets have the proper SO_REUSE option).
For every socket added to a bind_bucket, these flags need to be updated.
As soon as a socket that does not support reuse is added, the flag is
set to false and will never go back to true, unless the bind_bucket is
deleted.
Note that there is no mechanism to re-evaluate these flags when a socket
is removed (this might make sense when removing a socket that would not
allow reuse; this leaves room for a future patch).
For this optimization to work, it is mandatory that these flags are
properly initialized and updated.
When a child socket is created from a listen socket in
__inet_inherit_port, the TPROXY case could create a new bind bucket
without properly initializing these flags, thus preventing the
optimization to work. Alternatively, a socket not allowing reuse could
be added to an existing bind bucket without updating the flags, causing
bind_conflict to never be called as it should.
Call inet_csk_update_fastreuse when __inet_inherit_port decides to create
a new bind_bucket or use a different bind_bucket than the one of the
listen socket.
Fixes: 093d282321 ("tproxy: fix hash locking issue when using port redirection in __inet_inherit_port()")
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Tim Froidcoeur <tim.froidcoeur@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Refactor the fastreuse update code in inet_csk_get_port into a small
helper function that can be called from other places.
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Tim Froidcoeur <tim.froidcoeur@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
If we failed to assign proto idx, we free the twsk_slab_name but forget to
free the twsk_slab. Add a helper function tw_prot_cleanup() to free these
together and also use this helper function in proto_unregister().
Fixes: b45ce32135 ("sock: fix potential memory leak in proto_register()")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When creating a raw AF_NFC socket, CAP_NET_RAW needs to be checked first.
Signed-off-by: Qingyu Li <ieatmuttonchuan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When MSG_OOB is specified to tls_device_sendpage() the mapped page is
never unmapped.
Hold off mapping the page until after the flags are checked and the page
is actually needed.
Fixes: e8f6979981 ("net/tls: Add generic NIC offload infrastructure")
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Untangle the header spaghetti which causes build failures in various
situations caused by the lockdep additions to seqcount to validate that
the write side critical sections are non-preemptible.
- The seqcount associated lock debug addons which were blocked by the
above fallout.
seqcount writers contrary to seqlock writers must be externally
serialized, which usually happens via locking - except for strict per
CPU seqcounts. As the lock is not part of the seqcount, lockdep cannot
validate that the lock is held.
This new debug mechanism adds the concept of associated locks.
sequence count has now lock type variants and corresponding
initializers which take a pointer to the associated lock used for
writer serialization. If lockdep is enabled the pointer is stored and
write_seqcount_begin() has a lockdep assertion to validate that the
lock is held.
Aside of the type and the initializer no other code changes are
required at the seqcount usage sites. The rest of the seqcount API is
unchanged and determines the type at compile time with the help of
_Generic which is possible now that the minimal GCC version has been
moved up.
Adding this lockdep coverage unearthed a handful of seqcount bugs which
have been addressed already independent of this.
While generaly useful this comes with a Trojan Horse twist: On RT
kernels the write side critical section can become preemtible if the
writers are serialized by an associated lock, which leads to the well
known reader preempts writer livelock. RT prevents this by storing the
associated lock pointer independent of lockdep in the seqcount and
changing the reader side to block on the lock when a reader detects
that a writer is in the write side critical section.
- Conversion of seqcount usage sites to associated types and initializers.
-----BEGIN PGP SIGNATURE-----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=7Gj+
-----END PGP SIGNATURE-----
Merge tag 'locking-urgent-2020-08-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Thomas Gleixner:
"A set of locking fixes and updates:
- Untangle the header spaghetti which causes build failures in
various situations caused by the lockdep additions to seqcount to
validate that the write side critical sections are non-preemptible.
- The seqcount associated lock debug addons which were blocked by the
above fallout.
seqcount writers contrary to seqlock writers must be externally
serialized, which usually happens via locking - except for strict
per CPU seqcounts. As the lock is not part of the seqcount, lockdep
cannot validate that the lock is held.
This new debug mechanism adds the concept of associated locks.
sequence count has now lock type variants and corresponding
initializers which take a pointer to the associated lock used for
writer serialization. If lockdep is enabled the pointer is stored
and write_seqcount_begin() has a lockdep assertion to validate that
the lock is held.
Aside of the type and the initializer no other code changes are
required at the seqcount usage sites. The rest of the seqcount API
is unchanged and determines the type at compile time with the help
of _Generic which is possible now that the minimal GCC version has
been moved up.
Adding this lockdep coverage unearthed a handful of seqcount bugs
which have been addressed already independent of this.
While generally useful this comes with a Trojan Horse twist: On RT
kernels the write side critical section can become preemtible if
the writers are serialized by an associated lock, which leads to
the well known reader preempts writer livelock. RT prevents this by
storing the associated lock pointer independent of lockdep in the
seqcount and changing the reader side to block on the lock when a
reader detects that a writer is in the write side critical section.
- Conversion of seqcount usage sites to associated types and
initializers"
* tag 'locking-urgent-2020-08-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
locking/seqlock, headers: Untangle the spaghetti monster
locking, arch/ia64: Reduce <asm/smp.h> header dependencies by moving XTP bits into the new <asm/xtp.h> header
x86/headers: Remove APIC headers from <asm/smp.h>
seqcount: More consistent seqprop names
seqcount: Compress SEQCNT_LOCKNAME_ZERO()
seqlock: Fold seqcount_LOCKNAME_init() definition
seqlock: Fold seqcount_LOCKNAME_t definition
seqlock: s/__SEQ_LOCKDEP/__SEQ_LOCK/g
hrtimer: Use sequence counter with associated raw spinlock
kvm/eventfd: Use sequence counter with associated spinlock
userfaultfd: Use sequence counter with associated spinlock
NFSv4: Use sequence counter with associated spinlock
iocost: Use sequence counter with associated spinlock
raid5: Use sequence counter with associated spinlock
vfs: Use sequence counter with associated spinlock
timekeeping: Use sequence counter with associated raw spinlock
xfrm: policy: Use sequence counters with associated lock
netfilter: nft_set_rbtree: Use sequence counter with associated rwlock
netfilter: conntrack: Use sequence counter with associated spinlock
sched: tasks: Use sequence counter with associated spinlock
...
When TFO keys are read back on big endian systems either via the global
sysctl interface or via getsockopt() using TCP_FASTOPEN_KEY, the values
don't match what was written.
For example, on s390x:
# echo "1-2-3-4" > /proc/sys/net/ipv4/tcp_fastopen_key
# cat /proc/sys/net/ipv4/tcp_fastopen_key
02000000-01000000-04000000-03000000
Instead of:
# cat /proc/sys/net/ipv4/tcp_fastopen_key
00000001-00000002-00000003-00000004
Fix this by converting to the correct endianness on read. This was
reported by Colin Ian King when running the 'tcp_fastopen_backup_key' net
selftest on s390x, which depends on the read value matching what was
written. I've confirmed that the test now passes on big and little endian
systems.
Signed-off-by: Jason Baron <jbaron@akamai.com>
Fixes: 438ac88009 ("net: fastopen: robustness and endianness fixes for SipHash")
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dumazet <edumazet@google.com>
Reported-and-tested-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commits 6d04fe15f7 and
a31edb2059.
It turns out the idea to share a single pointer for both kernel and user
space address causes various kinds of problems. So use the slightly less
optimal version that uses an extra bit, but which is guaranteed to be safe
everywhere.
Fixes: 6d04fe15f7 ("net: optimize the sockptr_t for unified kernel/user address spaces")
Reported-by: Eric Dumazet <edumazet@google.com>
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
WARNING: CPU: 1 PID: 16059 at lib/refcount.c:31 refcount_warn_saturate+0xdf/0xf
[..]
__nft_mt_tg_destroy+0x42/0x50 [nft_compat]
nft_target_destroy+0x63/0x80 [nft_compat]
nf_tables_expr_destroy+0x1b/0x30 [nf_tables]
nf_tables_rule_destroy+0x3a/0x70 [nf_tables]
nf_tables_exit_net+0x186/0x3d0 [nf_tables]
Happens when a compat expr is destoyed from abort path.
There is no functional impact; after this work queue is flushed
unconditionally if its pending.
This removes the waitcount optimization. Test of repeated
iptables-restore of a ~60k kubernetes ruleset doesn't indicate
a slowdown. In case the counter is needed after all for some workloads
we can revert this and increment the refcount for the
!= NFT_PREPARE_TRANS case to avoid the increment/decrement imbalance.
While at it, also flush for match case, this was an oversight
in the original patch.
Fixes: ffe8923f10 ("netfilter: nft_compat: make sure xtables destructors have run")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
On big-endian machine, the returned register data when the exthdr is
present is not being compared correctly because little-endian is
assumed. The function nft_cmp_fast_mask(), called by nft_cmp_fast_eval()
and nft_cmp_fast_init(), calls cpu_to_le32().
The following dump also shows that little endian is assumed:
$ nft --debug=netlink add rule ip recordroute forward ip option rr exists counter
ip
[ exthdr load ipv4 1b @ 7 + 0 present => reg 1 ]
[ cmp eq reg 1 0x01000000 ]
[ counter pkts 0 bytes 0 ]
Lastly, debug print in nft_cmp_fast_init() and nft_cmp_fast_eval() when
RR option exists in the packet shows that the comparison fails because
the assumption:
nft_cmp_fast_init:189 priv->sreg=4 desc.len=8 mask=0xff000000 data.data[0]=0x10003e0
nft_cmp_fast_eval:57 regs->data[priv->sreg=4]=0x1 mask=0xff000000 priv->data=0x1000000
v2: use nft_reg_store8() instead (Florian Westphal). Also to avoid the
warnings reported by kernel test robot.
Fixes: dbb5281a1f ("netfilter: nf_tables: add support for matching IPv4 options")
Fixes: c078ca3b0c ("netfilter: nft_exthdr: Add support for existence check")
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
- Support for user extended attributes on NFS (RFC 8276)
- Further reduce unnecessary NFSv4 delegation recalls
Notable fixes:
- Fix recent krb5p regression
- Address a few resource leaks and a rare NULL dereference
Other:
- De-duplicate RPC/RDMA error handling and other utility functions
- Replace storage and display of kernel memory addresses by tracepoints
-----BEGIN PGP SIGNATURE-----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=OEpF
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.9' of git://git.linux-nfs.org/projects/cel/cel-2.6
Pull NFS server updates from Chuck Lever:
"Highlights:
- Support for user extended attributes on NFS (RFC 8276)
- Further reduce unnecessary NFSv4 delegation recalls
Notable fixes:
- Fix recent krb5p regression
- Address a few resource leaks and a rare NULL dereference
Other:
- De-duplicate RPC/RDMA error handling and other utility functions
- Replace storage and display of kernel memory addresses by tracepoints"
* tag 'nfsd-5.9' of git://git.linux-nfs.org/projects/cel/cel-2.6: (38 commits)
svcrdma: CM event handler clean up
svcrdma: Remove transport reference counting
svcrdma: Fix another Receive buffer leak
SUNRPC: Refresh the show_rqstp_flags() macro
nfsd: netns.h: delete a duplicated word
SUNRPC: Fix ("SUNRPC: Add "@len" parameter to gss_unwrap()")
nfsd: avoid a NULL dereference in __cld_pipe_upcall()
nfsd4: a client's own opens needn't prevent delegations
nfsd: Use seq_putc() in two functions
svcrdma: Display chunk completion ID when posting a rw_ctxt
svcrdma: Record send_ctxt completion ID in trace_svcrdma_post_send()
svcrdma: Introduce Send completion IDs
svcrdma: Record Receive completion ID in svc_rdma_decode_rqst
svcrdma: Introduce Receive completion IDs
svcrdma: Introduce infrastructure to support completion IDs
svcrdma: Add common XDR encoders for RDMA and Read segments
svcrdma: Add common XDR decoders for RDMA and Read segments
SUNRPC: Add helpers for decoding list discriminators symbolically
svcrdma: Remove declarations for functions long removed
svcrdma: Clean up trace_svcrdma_send_failed() tracepoint
...
Convert the uses of fallthrough comments to fallthrough macro.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use helper function ip_is_fragment() to check ip fragment.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The out_fs jump label has nothing to do but goto out.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We should fput() file iff FDPUT_FPUT is set. So we should set fput_needed
accordingly.
Fixes: 00e188ef6a ("sockfd_lookup_light(): switch to fdget^W^Waway from fget_light")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use helper function fdput() to fput() the file iff FDPUT_FPUT is set.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If CONFIG_INET_XFRM_TUNNEL is set but CONFIG_IPV6 is n,
net/ipv4/ip_vti.c:493:27: warning: 'vti_ipip6_handler' defined but not used [-Wunused-variable]
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Trying to use ktls on a system with 32-bit userspace and 64-bit kernel
results in a EOPNOTSUPP message during sendmsg:
setsockopt(3, SOL_TLS, TLS_TX, …, 40) = 0
sendmsg(3, …, msg_flags=0}, 0) = -1 EOPNOTSUPP (Operation not supported)
The tls_sw implementation does strict flag checking and does not allow
the MSG_CMSG_COMPAT flag, which is set if the message comes in through
the compat syscall.
This patch adds MSG_CMSG_COMPAT to the flag check to allow the usage of
the TLS SW implementation on systems using the compat syscall path.
Note that the same check is present in the sendmsg path for the TLS
device implementation, however the flag hasn't been added there for lack
of testing hardware.
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf 2020-08-08
The following pull-request contains BPF updates for your *net* tree.
We've added 11 non-merge commits during the last 2 day(s) which contain
a total of 24 files changed, 216 insertions(+), 135 deletions(-).
The main changes are:
1) Fix UAPI for BPF map iterator before it gets frozen to allow for more
extensions/customization in future, from Yonghong Song.
2) Fix selftests build to undo verbose build output, from Andrii Nakryiko.
3) Fix inlining compilation error on bpf_do_trace_printk() due to variable
argument lists, from Stanislav Fomichev.
4) Fix an uninitialized pointer warning at btf__parse_raw() in libbpf,
from Daniel T. Lee.
5) Fix several compilation warnings in selftests with regards to ignoring
return value, from Jianlin Lv.
6) Fix interruptions by switching off timeout for BPF tests, from Jiri Benc.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
With commit b93df08ccd ("mptcp: explicitly track the fully
established status"), the status of unaccepted mptcp closed in
mptcp_sock_destruct() changes from TCP_SYN_RECV to TCP_ESTABLISHED.
As a result mptcp_sock_destruct() does not perform the proper
cleanup and inet_sock_destruct() will later emit a warn.
Address the issue updating the condition tested in mptcp_sock_destruct().
Also update the related comment.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/66
Reported-and-tested-by: Christoph Paasch <cpaasch@apple.com>
Fixes: b93df08ccd ("mptcp: explicitly track the fully established status")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=5TFR
-----END PGP SIGNATURE-----
Merge tag 'seccomp-v5.9-rc1-fix1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp fix from Kees Cook:
"This fixes my typo in the SCM_RIGHTS refactoring that broke compat
handling.
Thanks to Thadeu Lima de Souza Cascardo for tracking it down, and to
Christian Zigotzky and Alex Xu for their reports"
* tag 'seccomp-v5.9-rc1-fix1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
net/scm: Fix typo in SCM_RIGHTS compat refactoring
When refactoring the SCM_RIGHTS code, I accidentally mis-merged my
native/compat diffs, which entirely broke using SCM_RIGHTS in compat
mode. Use the correct helper.
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Link: https://lists.ozlabs.org/pipermail/linuxppc-dev/2020-August/216156.html
Reported-by: "Alex Xu (Hello71)" <alex_y_xu@yahoo.ca>
Link: https://lore.kernel.org/lkml/1596812929.lz7fuo8r2w.none@localhost/
Suggested-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Fixes: c0029de509 ("net/scm: Regularize compat handling of scm_detach_fds()")
Tested-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Merge misc updates from Andrew Morton:
- a few MM hotfixes
- kthread, tools, scripts, ntfs and ocfs2
- some of MM
Subsystems affected by this patch series: kthread, tools, scripts, ntfs,
ocfs2 and mm (hofixes, pagealloc, slab-generic, slab, slub, kcsan,
debug, pagecache, gup, swap, shmem, memcg, pagemap, mremap, mincore,
sparsemem, vmalloc, kasan, pagealloc, hugetlb and vmscan).
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (162 commits)
mm: vmscan: consistent update to pgrefill
mm/vmscan.c: fix typo
khugepaged: khugepaged_test_exit() check mmget_still_valid()
khugepaged: retract_page_tables() remember to test exit
khugepaged: collapse_pte_mapped_thp() protect the pmd lock
khugepaged: collapse_pte_mapped_thp() flush the right range
mm/hugetlb: fix calculation of adjust_range_if_pmd_sharing_possible
mm: thp: replace HTTP links with HTTPS ones
mm/page_alloc: fix memalloc_nocma_{save/restore} APIs
mm/page_alloc.c: skip setting nodemask when we are in interrupt
mm/page_alloc: fallbacks at most has 3 elements
mm/page_alloc: silence a KASAN false positive
mm/page_alloc.c: remove unnecessary end_bitidx for [set|get]_pfnblock_flags_mask()
mm/page_alloc.c: simplify pageblock bitmap access
mm/page_alloc.c: extract the common part in pfn_to_bitidx()
mm/page_alloc.c: replace the definition of NR_MIGRATETYPE_BITS with PB_migratetype_bits
mm/shuffle: remove dynamic reconfiguration
mm/memory_hotplug: document why shuffle_zone() is relevant
mm/page_alloc: remove nr_free_pagecache_pages()
mm: remove vm_total_pages
...
As said by Linus:
A symmetric naming is only helpful if it implies symmetries in use.
Otherwise it's actively misleading.
In "kzalloc()", the z is meaningful and an important part of what the
caller wants.
In "kzfree()", the z is actively detrimental, because maybe in the
future we really _might_ want to use that "memfill(0xdeadbeef)" or
something. The "zero" part of the interface isn't even _relevant_.
The main reason that kzfree() exists is to clear sensitive information
that should not be leaked to other future users of the same memory
objects.
Rename kzfree() to kfree_sensitive() to follow the example of the recently
added kvfree_sensitive() and make the intention of the API more explicit.
In addition, memzero_explicit() is used to clear the memory to make sure
that it won't get optimized away by the compiler.
The renaming is done by using the command sequence:
git grep -w --name-only kzfree |\
xargs sed -i 's/kzfree/kfree_sensitive/'
followed by some editing of the kfree_sensitive() kerneldoc and adding
a kzfree backward compatibility macro in slab.h.
[akpm@linux-foundation.org: fs/crypto/inline_crypt.c needs linux/slab.h]
[akpm@linux-foundation.org: fix fs/crypto/inline_crypt.c some more]
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Joe Perches <joe@perches.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: "Jason A . Donenfeld" <Jason@zx2c4.com>
Link: http://lkml.kernel.org/r/20200616154311.12314-3-longman@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This set includes a some improvements to the dlm
networking layer: improving the ability to trace
dlm messages for debugging, and improved handling
of bad messages or disrupted connections.
-----BEGIN PGP SIGNATURE-----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=qgti
-----END PGP SIGNATURE-----
Merge tag 'dlm-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm updates from David Teigland:
"This set includes a some improvements to the dlm networking layer:
improving the ability to trace dlm messages for debugging, and
improved handling of bad messages or disrupted connections"
* tag 'dlm-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
fs: dlm: implement tcp graceful shutdown
fs: dlm: change handling of reconnects
fs: dlm: don't close socket on invalid message
fs: dlm: set skb mark per peer socket
fs: dlm: set skb mark for listen socket
net: sock: add sock_set_mark
dlm: Fix kobject memleak
drivers cleanup (Andrzej Pietrasiewicz)
- Add generic netlink support for userspace notifications: events, temperature
and discovery commands (Daniel Lezcano)
- Fix redundant initialization for a ret variable (Colin Ian King)
- Remove the clock cooling code as it is used nowhere (Amit Kucheria)
- Add the rcar_gen3_thermal's r8a774e1 support (Marian-Cristian Rotariu)
- Replace all references to thermal.txt in the documentation to the
corresponding yaml files (Amit Kucheria)
- Add maintainer entry for the IPA (Lukasz Luba)
- Add support for MSM8939 for the tsens (Shawn Guo)
- Update power allocator and devfreq cooling to SPDX licensing (Lukasz Luba)
- Add Cannon Lake Low Power PCH support (Sumeet Pawnikar)
- Add tsensor support for V2 mediatek thermal system (Henry Yen)
- Fix thermal zone lookup by ID for the core code (Thierry Reding)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAl8q7tsACgkQqDIjiipP
6E+5Rwf7BFEn5YXPvng8cmnAlgvEBc9DdT6mGSo0NpFm9MdUxXlaqvw3WWSGyqWQ
+z0Ka7lmn5XyiMsVN11++Snp+79X17HzZf9SXO3glyIpAn+5prTDRhzzj0/jPrtS
sEeI++DrILsKKMGVljzftLmwNJN9DkUDNcnmWmZdCDbYVEKtP9Pjf2wBjAnXj7sX
JA3CkHRMwYLEQbfaKz37M11cYM+LqbDOlb6U11YWgAGGJ7d7zNYRf2/YSYPM4AN6
iE6j0E+3jIlXesULsap1AzeJaBq+wFxj1FL2TUZ8KscvRrm3AucqzNAT2M/Bc5Az
XLKKzc6Gp9JfqB5KXhX2EDu7VRnDBg==
=cSMN
-----END PGP SIGNATURE-----
Merge tag 'thermal-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal updates from Daniel Lezcano:
- Add support to enable/disable the thermal zones resulting on core
code and drivers cleanup (Andrzej Pietrasiewicz)
- Add generic netlink support for userspace notifications: events,
temperature and discovery commands (Daniel Lezcano)
- Fix redundant initialization for a ret variable (Colin Ian King)
- Remove the clock cooling code as it is used nowhere (Amit Kucheria)
- Add the rcar_gen3_thermal's r8a774e1 support (Marian-Cristian
Rotariu)
- Replace all references to thermal.txt in the documentation to the
corresponding yaml files (Amit Kucheria)
- Add maintainer entry for the IPA (Lukasz Luba)
- Add support for MSM8939 for the tsens (Shawn Guo)
- Update power allocator and devfreq cooling to SPDX licensing (Lukasz
Luba)
- Add Cannon Lake Low Power PCH support (Sumeet Pawnikar)
- Add tsensor support for V2 mediatek thermal system (Henry Yen)
- Fix thermal zone lookup by ID for the core code (Thierry Reding)
* tag 'thermal-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (40 commits)
thermal: intel: intel_pch_thermal: Add Cannon Lake Low Power PCH support
thermal: mediatek: Add tsensor support for V2 thermal system
thermal: mediatek: Prepare to add support for other platforms
thermal: Update power allocator and devfreq cooling to SPDX licensing
MAINTAINERS: update entry to thermal governors file name prefixing
thermal: core: Add thermal zone enable/disable notification
thermal: qcom: tsens-v0_1: Add support for MSM8939
dt-bindings: tsens: qcom: Document MSM8939 compatible
thermal: core: Fix thermal zone lookup by ID
thermal: int340x: processor_thermal: fix: update Jasper Lake PCI id
thermal: imx8mm: Support module autoloading
thermal: ti-soc-thermal: Fix reversed condition in ti_thermal_expose_sensor()
MAINTAINERS: Add maintenance information for IPA
thermal: rcar_gen3_thermal: Do not shadow thcode variable
dt-bindings: thermal: Get rid of thermal.txt and replace references
thermal: core: Move initialization after core initcall
thermal: netlink: Improve the initcall ordering
net: genetlink: Move initialization to core_initcall
thermal: rcar_gen3_thermal: Add r8a774e1 support
thermal/drivers/clock_cooling: Remove clock_cooling code
...
Commit a5cbe05a66 ("bpf: Implement bpf iterator for
map elements") added bpf iterator support for
map elements. The map element bpf iterator requires
info to identify a particular map. In the above
commit, the attr->link_create.target_fd is used
to carry map_fd and an enum bpf_iter_link_info
is added to uapi to specify the target_fd actually
representing a map_fd:
enum bpf_iter_link_info {
BPF_ITER_LINK_UNSPEC = 0,
BPF_ITER_LINK_MAP_FD = 1,
MAX_BPF_ITER_LINK_INFO,
};
This is an extensible approach as we can grow
enumerator for pid, cgroup_id, etc. and we can
unionize target_fd for pid, cgroup_id, etc.
But in the future, there are chances that
more complex customization may happen, e.g.,
for tasks, it could be filtered based on
both cgroup_id and user_id.
This patch changed the uapi to have fields
__aligned_u64 iter_info;
__u32 iter_info_len;
for additional iter_info for link_create.
The iter_info is defined as
union bpf_iter_link_info {
struct {
__u32 map_fd;
} map;
};
So future extension for additional customization
will be easier. The bpf_iter_link_info will be
passed to target callback to validate and generic
bpf_iter framework does not need to deal it any
more.
Note that map_fd = 0 will be considered invalid
and -EBADF will be returned to user space.
Fixes: a5cbe05a66 ("bpf: Implement bpf iterator for map elements")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200805055056.1457463-1-yhs@fb.com
This patch adds a new socket helper function to set the mark value for a
kernel socket.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Pull networking updates from David Miller:
1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan.
2) Support UDP segmentation in code TSO code, from Eric Dumazet.
3) Allow flashing different flash images in cxgb4 driver, from Vishal
Kulkarni.
4) Add drop frames counter and flow status to tc flower offloading,
from Po Liu.
5) Support n-tuple filters in cxgb4, from Vishal Kulkarni.
6) Various new indirect call avoidance, from Eric Dumazet and Brian
Vazquez.
7) Fix BPF verifier failures on 32-bit pointer arithmetic, from
Yonghong Song.
8) Support querying and setting hardware address of a port function via
devlink, use this in mlx5, from Parav Pandit.
9) Support hw ipsec offload on bonding slaves, from Jarod Wilson.
10) Switch qca8k driver over to phylink, from Jonathan McDowell.
11) In bpftool, show list of processes holding BPF FD references to
maps, programs, links, and btf objects. From Andrii Nakryiko.
12) Several conversions over to generic power management, from Vaibhav
Gupta.
13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry
Yakunin.
14) Various https url conversions, from Alexander A. Klimov.
15) Timestamping and PHC support for mscc PHY driver, from Antoine
Tenart.
16) Support bpf iterating over tcp and udp sockets, from Yonghong Song.
17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov.
18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan.
19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several
drivers. From Luc Van Oostenryck.
20) XDP support for xen-netfront, from Denis Kirjanov.
21) Support receive buffer autotuning in MPTCP, from Florian Westphal.
22) Support EF100 chip in sfc driver, from Edward Cree.
23) Add XDP support to mvpp2 driver, from Matteo Croce.
24) Support MPTCP in sock_diag, from Paolo Abeni.
25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic
infrastructure, from Jakub Kicinski.
26) Several pci_ --> dma_ API conversions, from Christophe JAILLET.
27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel.
28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki.
29) Refactor a lot of networking socket option handling code in order to
avoid set_fs() calls, from Christoph Hellwig.
30) Add rfc4884 support to icmp code, from Willem de Bruijn.
31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei.
32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin.
33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin.
34) Support TCP syncookies in MPTCP, from Flowian Westphal.
35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano
Brivio.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits)
net: thunderx: initialize VF's mailbox mutex before first usage
usb: hso: remove bogus check for EINPROGRESS
usb: hso: no complaint about kmalloc failure
hso: fix bailout in error case of probe
ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM
selftests/net: relax cpu affinity requirement in msg_zerocopy test
mptcp: be careful on subflow creation
selftests: rtnetlink: make kci_test_encap() return sub-test result
selftests: rtnetlink: correct the final return value for the test
net: dsa: sja1105: use detected device id instead of DT one on mismatch
tipc: set ub->ifindex for local ipv6 address
ipv6: add ipv6_dev_find()
net: openvswitch: silence suspicious RCU usage warning
Revert "vxlan: fix tos value before xmit"
ptp: only allow phase values lower than 1 period
farsync: switch from 'pci_' to 'dma_' API
wan: wanxl: switch from 'pci_' to 'dma_' API
hv_netvsc: do not use VF device if link is down
dpaa2-eth: Fix passing zero to 'PTR_ERR' warning
net: macb: Properly handle phylink on at91sam9x
...
On architectures defining _HAVE_ARCH_IPV6_CSUM, we get
csum_ipv6_magic() defined by means of arch checksum.h headers. On
other architectures, we actually need to include net/ip6_checksum.h
to be able to use it.
Without this include, building with defconfig breaks at least for
s390.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 4cb47a8644 ("tunnels: PMTU discovery support for directly bridged IP packets")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Without ub->ifindex set for ipv6 address in tipc_udp_enable(),
ipv6_sock_mc_join() may make the wrong dev join the multicast
address in enable_mcast(). This causes that tipc links would
never be created.
So fix it by getting the right netdev and setting ub->ifindex,
as it does for ipv4 address.
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is to add an ip_dev_find like function for ipv6, used to find
the dev by saddr.
It will be used by TIPC protocol. So also export it.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ovs_flow_tbl_destroy always is called from RCU callback
or error path. It is no need to check if rcu_read_lock
or lockdep_ovsl_is_held was held.
ovs_dp_cmd_fill_info always is called with ovs_mutex,
So use the rcu_dereference_ovsl instead of rcu_dereference
in ovs_flow_tbl_masks_cache_size.
Fixes: 9bf24f594c ("net: openvswitch: make masks cache size configurable")
Cc: Eelco Chaudron <echaudro@redhat.com>
Reported-by: syzbot+c0eb9e7cdde04e4eb4be@syzkaller.appspotmail.com
Reported-by: syzbot+f612c02823acb02ff9bc@syzkaller.appspotmail.com
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
while to come. Changes include:
- Some new Chinese translations
- Progress on the battle against double words words and non-HTTPS URLs
- Some block-mq documentation
- More RST conversions from Mauro. At this point, that task is
essentially complete, so we shouldn't see this kind of churn again for a
while. Unless we decide to switch to asciidoc or something...:)
- Lots of typo fixes, warning fixes, and more.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl8oVkwPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YoW8H/jJ/xnXFn7tkgVPQAlL3k5HCnK7A5nDP9RVR
cg1pTx1cEFdjzxPlJyExU6/v+AImOvtweHXC+JDK7YcJ6XFUNYXJI3LxL5KwUXbY
BL/xRFszDSXH2C7SJF5GECcFYp01e/FWSLN3yWAh+g+XwsKiTJ8q9+CoIDkHfPGO
7oQsHKFu6s36Af0LfSgxk4sVB7EJbo8e4psuPsP5SUrl+oXRO43Put0rXkR4yJoH
9oOaB51Do5fZp8I4JVAqGXvpXoExyLMO4yw0mASm6YSZ3KyjR8Fae+HD9Cq4ZuwY
0uzb9K+9NEhqbfwtyBsi99S64/6Zo/MonwKwevZuhtsDTK4l4iU=
=JQLZ
-----END PGP SIGNATURE-----
Merge tag 'docs-5.9' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"It's been a busy cycle for documentation - hopefully the busiest for a
while to come. Changes include:
- Some new Chinese translations
- Progress on the battle against double words words and non-HTTPS
URLs
- Some block-mq documentation
- More RST conversions from Mauro. At this point, that task is
essentially complete, so we shouldn't see this kind of churn again
for a while. Unless we decide to switch to asciidoc or
something...:)
- Lots of typo fixes, warning fixes, and more"
* tag 'docs-5.9' of git://git.lwn.net/linux: (195 commits)
scripts/kernel-doc: optionally treat warnings as errors
docs: ia64: correct typo
mailmap: add entry for <alobakin@marvell.com>
doc/zh_CN: add cpu-load Chinese version
Documentation/admin-guide: tainted-kernels: fix spelling mistake
MAINTAINERS: adjust kprobes.rst entry to new location
devices.txt: document rfkill allocation
PCI: correct flag name
docs: filesystems: vfs: correct flag name
docs: filesystems: vfs: correct sync_mode flag names
docs: path-lookup: markup fixes for emphasis
docs: path-lookup: more markup fixes
docs: path-lookup: fix HTML entity mojibake
CREDITS: Replace HTTP links with HTTPS ones
docs: process: Add an example for creating a fixes tag
doc/zh_CN: add Chinese translation prefer section
doc/zh_CN: add clearing-warn-once Chinese version
doc/zh_CN: add admin-guide index
doc:it_IT: process: coding-style.rst: Correct __maybe_unused compiler label
futex: MAINTAINERS: Re-add selftests directory
...
Current behaviour: every time a v3 operation is re-sent to the server
we update (double) the timeout. There is no distinction between whether
or not the previous timer had expired before the re-sent happened.
Here's the scenario:
1. Client sends a v3 operation
2. Server RST-s the connection (prior to the timeout) (eg., connection
is immediately reset)
3. Client re-sends a v3 operation but the timeout is now 120sec.
As a result, an application sees 2mins pause before a retry in case
server again does not reply.
Instead, this patch proposes to keep track off when the minor timeout
should happen and if it didn't, then don't update the new timeout.
Value is updated based on the previous value to make timeouts
predictable.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Pull execve updates from Eric Biederman:
"During the development of v5.7 I ran into bugs and quality of
implementation issues related to exec that could not be easily fixed
because of the way exec is implemented. So I have been diggin into
exec and cleaning up what I can.
This cycle I have been looking at different ideas and different
implementations to see what is possible to improve exec, and cleaning
the way exec interfaces with in kernel users. Only cleaning up the
interfaces of exec with rest of the kernel has managed to stabalize
and make it through review in time for v5.9-rc1 resulting in 2 sets of
changes this cycle.
- Implement kernel_execve
- Make the user mode driver code a better citizen
With kernel_execve the code size got a little larger as the copying of
parameters from userspace and copying of parameters from userspace is
now separate. The good news is kernel threads no longer need to play
games with set_fs to use exec. Which when combined with the rest of
Christophs set_fs changes should security bugs with set_fs much more
difficult"
* 'exec-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (23 commits)
exec: Implement kernel_execve
exec: Factor bprm_stack_limits out of prepare_arg_pages
exec: Factor bprm_execve out of do_execve_common
exec: Move bprm_mm_init into alloc_bprm
exec: Move initialization of bprm->filename into alloc_bprm
exec: Factor out alloc_bprm
exec: Remove unnecessary spaces from binfmts.h
umd: Stop using split_argv
umd: Remove exit_umh
bpfilter: Take advantage of the facilities of struct pid
exit: Factor thread_group_exited out of pidfd_poll
umd: Track user space drivers with struct pid
bpfilter: Move bpfilter_umh back into init data
exec: Remove do_execve_file
umh: Stop calling do_execve_file
umd: Transform fork_usermode_blob into fork_usermode_driver
umd: Rename umd_info.cmdline umd_info.driver_name
umd: For clarity rename umh_info umd_info
umh: Separate the user mode driver and the user mode helper support
umh: Remove call_usermodehelper_setup_file.
...
-----BEGIN PGP SIGNATURE-----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=Xs3M
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20200803' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
"Aside from some smaller bug fixes, here are the highlights:
- add a new backlog wait metric to the audit status message, this is
intended to help admins determine how long processes have been
waiting for the audit backlog queue to clear
- generate audit records for nftables configuration changes
- generate CWD audit records for for the relevant LSM audit records"
* tag 'audit-pr-20200803' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: report audit wait metric in audit status reply
audit: purge audit_log_string from the intra-kernel audit API
audit: issue CWD record to accompany LSM_AUDIT_DATA_* records
audit: use the proper gfp flags in the audit_log_nfcfg() calls
audit: remove unused !CONFIG_AUDITSYSCALL __audit_inode* stubs
audit: add gfp parameter to audit_log_nfcfg
audit: log nftables configuration change events
audit: Use struct_size() helper in alloc_chunk
- Improved selftest coverage, timeouts, and reporting
- Add EPOLLHUP support for SECCOMP_RET_USER_NOTIF (Christian Brauner)
- Refactor __scm_install_fd() into __receive_fd() and fix buggy callers
- Introduce "addfd" command for SECCOMP_RET_USER_NOTIF (Sargun Dhillon)
-----BEGIN PGP SIGNATURE-----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=yb55
-----END PGP SIGNATURE-----
Merge tag 'seccomp-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp updates from Kees Cook:
"There are a bunch of clean ups and selftest improvements along with
two major updates to the SECCOMP_RET_USER_NOTIF filter return:
EPOLLHUP support to more easily detect the death of a monitored
process, and being able to inject fds when intercepting syscalls that
expect an fd-opening side-effect (needed by both container folks and
Chrome). The latter continued the refactoring of __scm_install_fd()
started by Christoph, and in the process found and fixed a handful of
bugs in various callers.
- Improved selftest coverage, timeouts, and reporting
- Add EPOLLHUP support for SECCOMP_RET_USER_NOTIF (Christian Brauner)
- Refactor __scm_install_fd() into __receive_fd() and fix buggy
callers
- Introduce 'addfd' command for SECCOMP_RET_USER_NOTIF (Sargun
Dhillon)"
* tag 'seccomp-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (30 commits)
selftests/seccomp: Test SECCOMP_IOCTL_NOTIF_ADDFD
seccomp: Introduce addfd ioctl to seccomp user notifier
fs: Expand __receive_fd() to accept existing fd
pidfd: Replace open-coded receive_fd()
fs: Add receive_fd() wrapper for __receive_fd()
fs: Move __scm_install_fd() to __receive_fd()
net/scm: Regularize compat handling of scm_detach_fds()
pidfd: Add missing sock updates for pidfd_getfd()
net/compat: Add missing sock updates for SCM_RIGHTS
selftests/seccomp: Check ENOSYS under tracing
selftests/seccomp: Refactor to use fixture variants
selftests/harness: Clean up kern-doc for fixtures
seccomp: Use -1 marker for end of mode 1 syscall list
seccomp: Fix ioctl number for SECCOMP_IOCTL_NOTIF_ID_VALID
selftests/seccomp: Rename user_trap_syscall() to user_notif_syscall()
selftests/seccomp: Make kcmp() less required
seccomp: Use pr_fmt
selftests/seccomp: Improve calibration loop
selftests/seccomp: use 90s as timeout
selftests/seccomp: Expand benchmark to per-filter measurements
...
- Prepare for tasklet API modernization (Romain Perier, Allen Pais, Kees Cook)
-----BEGIN PGP SIGNATURE-----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=hb+e
-----END PGP SIGNATURE-----
Merge tag 'tasklets-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull tasklets API update from Kees Cook:
"These are the infrastructure updates needed to support converting the
tasklet API to something more modern (and hopefully for removal
further down the road).
There is a 300-patch series waiting in the wings to get set out to
subsystem maintainers, but these changes need to be present in the
kernel first. Since this has some treewide changes, I carried this
series for -next instead of paining Thomas with it in -tip, but it's
got his Ack.
This is similar to the timer_struct modernization from a while back,
but not nearly as messy (I hope). :)
- Prepare for tasklet API modernization (Romain Perier, Allen Pais,
Kees Cook)"
* tag 'tasklets-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
tasklet: Introduce new initialization API
treewide: Replace DECLARE_TASKLET() with DECLARE_TASKLET_OLD()
usb: gadget: udc: Avoid tasklet passing a global
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Flush the cleanup xtables worker to make sure destructors
have completed, from Florian Westphal.
2) iifgroup is matching erroneously, also from Florian.
3) Add selftest for meta interface matching, from Florian Westphal.
4) Move nf_ct_offload_timeout() to header, from Roi Dayan.
5) Call nf_ct_offload_timeout() from flow_offload_add() to
make sure garbage collection does not evict offloaded flow,
from Roi Dayan.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
It's currently possible to bridge Ethernet tunnels carrying IP
packets directly to external interfaces without assigning them
addresses and routes on the bridged network itself: this is the case
for UDP tunnels bridged with a standard bridge or by Open vSwitch.
PMTU discovery is currently broken with those configurations, because
the encapsulation effectively decreases the MTU of the link, and
while we are able to account for this using PMTU discovery on the
lower layer, we don't have a way to relay ICMP or ICMPv6 messages
needed by the sender, because we don't have valid routes to it.
On the other hand, as a tunnel endpoint, we can't fragment packets
as a general approach: this is for instance clearly forbidden for
VXLAN by RFC 7348, section 4.3:
VTEPs MUST NOT fragment VXLAN packets. Intermediate routers may
fragment encapsulated VXLAN packets due to the larger frame size.
The destination VTEP MAY silently discard such VXLAN fragments.
The same paragraph recommends that the MTU over the physical network
accomodates for encapsulations, but this isn't a practical option for
complex topologies, especially for typical Open vSwitch use cases.
Further, it states that:
Other techniques like Path MTU discovery (see [RFC1191] and
[RFC1981]) MAY be used to address this requirement as well.
Now, PMTU discovery already works for routed interfaces, we get
route exceptions created by the encapsulation device as they receive
ICMP Fragmentation Needed and ICMPv6 Packet Too Big messages, and
we already rebuild those messages with the appropriate MTU and route
them back to the sender.
Add the missing bits for bridged cases:
- checks in skb_tunnel_check_pmtu() to understand if it's appropriate
to trigger a reply according to RFC 1122 section 3.2.2 for ICMP and
RFC 4443 section 2.4 for ICMPv6. This function is already called by
UDP tunnels
- a new function generating those ICMP or ICMPv6 replies. We can't
reuse icmp_send() and icmp6_send() as we don't see the sender as a
valid destination. This doesn't need to be generic, as we don't
cover any other type of ICMP errors given that we only provide an
encapsulation function to the sender
While at it, make the MTU check in skb_tunnel_check_pmtu() accurate:
we might receive GSO buffers here, and the passed headroom already
includes the inner MAC length, so we don't have to account for it
a second time (that would imply three MAC headers on the wire, but
there are just two).
This issue became visible while bridging IPv6 packets with 4500 bytes
of payload over GENEVE using IPv4 with a PMTU of 4000. Given the 50
bytes of encapsulation headroom, we would advertise MTU as 3950, and
we would reject fragmented IPv6 datagrams of 3958 bytes size on the
wire. We're exclusively dealing with network MTU here, though, so we
could get Ethernet frames up to 3964 octets in that case.
v2:
- moved skb_tunnel_check_pmtu() to ip_tunnel_core.c (David Ahern)
- split IPv4/IPv6 functions (David Ahern)
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, processes sending traffic to a local bridge with an
encapsulation device as a port don't get ICMP errors if they exceed
the PMTU of the encapsulated link.
David Ahern suggested this as a hack, but it actually looks like
the correct solution: when we update the PMTU for a given destination
by means of updating or creating a route exception, the encapsulation
might trigger this because of PMTU discovery happening either on the
encapsulation device itself, or its lower layer. This happens on
bridged encapsulations only.
The output interface shouldn't matter, because we already have a
valid destination. Drop the output interface restriction from the
associated route lookup.
For UDP tunnels, we will now have a route exception created for the
encapsulation itself, with a MTU value reflecting its headroom, which
allows a bridge forwarding IP packets originated locally to deliver
errors back to the sending socket.
The behaviour is now consistent with IPv6 and verified with selftests
pmtu_ipv{4,6}_br_{geneve,vxlan}{4,6}_exception introduced later in
this series.
v2:
- reset output interface only for bridge ports (David Ahern)
- add and use netif_is_any_bridge_port() helper (David Ahern)
Suggested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-08-04
The following pull-request contains BPF updates for your *net-next* tree.
We've added 73 non-merge commits during the last 9 day(s) which contain
a total of 135 files changed, 4603 insertions(+), 1013 deletions(-).
The main changes are:
1) Implement bpf_link support for XDP. Also add LINK_DETACH operation for the BPF
syscall allowing processes with BPF link FD to force-detach, from Andrii Nakryiko.
2) Add BPF iterator for map elements and to iterate all BPF programs for efficient
in-kernel inspection, from Yonghong Song and Alexei Starovoitov.
3) Separate bpf_get_{stack,stackid}() helpers for perf events in BPF to avoid
unwinder errors, from Song Liu.
4) Allow cgroup local storage map to be shared between programs on the same
cgroup. Also extend BPF selftests with coverage, from YiFei Zhu.
5) Add BPF exception tables to ARM64 JIT in order to be able to JIT BPF_PROBE_MEM
load instructions, from Jean-Philippe Brucker.
6) Follow-up fixes on BPF socket lookup in combination with reuseport group
handling. Also add related BPF selftests, from Jakub Sitnicki.
7) Allow to use socket storage in BPF_PROG_TYPE_CGROUP_SOCK-typed programs for
socket create/release as well as bind functions, from Stanislav Fomichev.
8) Fix an info leak in xsk_getsockopt() when retrieving XDP stats via old struct
xdp_statistics, from Peilin Ye.
9) Fix PT_REGS_RC{,_CORE}() macros in libbpf for MIPS arch, from Jerry Crunchtime.
10) Extend BPF kernel test infra with skb->family and skb->{local,remote}_ip{4,6}
fields and allow user space to specify skb->dev via ifindex, from Dmitry Yakunin.
11) Fix a bpftool segfault due to missing program type name and make it more robust
to prevent them in future gaps, from Quentin Monnet.
12) Consolidate cgroup helper functions across selftests and fix a v6 localhost
resolver issue, from John Fastabend.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patchset introduces some updates to mlx5 driver.
1) Jakub converts mlx5 to use the new udp tunnel infrastructure.
Starting with a hack to allow drivers to request a static configuration
of the default vxlan port, and then a patch that converts mlx5.
2) Parav implements change_carrier ndo for VF eswitch representors,
to speedup link state control of representors netdevices.
3) Alex Vesker, makes a simple update to software steering to fix an issue
with push vlan action sequence
4) Leon removes a redundant dump stack on error flow.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAl8oRdgACgkQSD+KveBX
+j4/LQgAkSjNzOaS7bVDzhoYL3aBQOMIzgocJUeVi7xXH8IO1uy55mNDrKBqjxbW
dy9U9VsvV5i2V2qkkQLvHVkoDSg8Buo2Uxu4OrZHOLN0KfbFrra4VvmB1CzEBix8
FICnQaZZcE7529P04TgZ8Mo9vRb5VdJFhqED5Nvegy+y8FolEsQYbjIoDBE6wa0j
Meqa/29+XCE5FzTOjbbQWizAnRZMbkxtSSreDNgeHxke9eMSO+fmwKScng63QUfl
7nfU6dW6A0d1kHhpL5RqAFOcmkpSdqYaA3SA+/8pPT9X3yOAkxE6KTKGIixpB9JX
zQt+Wkna49jJ/JfDQB5vgww5c0HjAQ==
=j0fG
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2020-08-03
This patchset introduces some updates to mlx5 driver.
1) Jakub converts mlx5 to use the new udp tunnel infrastructure.
Starting with a hack to allow drivers to request a static configuration
of the default vxlan port, and then a patch that converts mlx5.
2) Parav implements change_carrier ndo for VF eswitch representors,
to speedup link state control of representors netdevices.
3) Alex Vesker, makes a simple update to software steering to fix an issue
with push vlan action sequence
4) Leon removes a redundant dump stack on error flow.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In case of memory pressure, mptcp_sendmsg() may call
sk_stream_wait_memory() after succesfully xmitting some
bytes. If the latter fails we currently return to the
user-space the error code, ignoring the succeful xmit.
Address the issue always checking for the xmitted bytes
before mptcp_sendmsg() completes.
Fixes: f296234c98 ("mptcp: Add handling of incoming MP_JOIN requests")
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A later patch will refuse to set the action of certain traps in mlxsw
and also to change the policer binding of certain groups. Pass extack so
that failure could be communicated clearly to user space.
Reviewed-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the packet trap that can report packets that were ECN marked due to RED
AQM.
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net/core/fib_rules.c:26:7: warning: "CONFIG_IP_MULTIPLE_TABLES" is not defined, evaluates to 0 [-Wundef]
#elif CONFIG_IP_MULTIPLE_TABLES
^~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 8b66a6fd34 ("fib: fix another fib_rules_ops indirect call wrapper problem")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-By: Brian Vazquez <brianvv@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use mptcp_for_each_subflow in mptcp_stream_accept instead of
open-coding.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* handle new SAE (WPA3 authentication) status codes in the correct way
* fix a while that should be an if instead, avoiding infinite loops
* handle beacon filtering changing better
-----BEGIN PGP SIGNATURE-----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=9iOZ
-----END PGP SIGNATURE-----
Merge tag 'mac80211-next-for-davem-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
A few more changes, notably:
* handle new SAE (WPA3 authentication) status codes in the correct way
* fix a while that should be an if instead, avoiding infinite loops
* handle beacon filtering changing better
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Refactor the function seg6_lwt_headroom out of the seg6_iptunnel.h uapi
header, because it is only used in seg6_iptunnel.c. Moreover, it is only
used in the kernel code, as indicated by the "#ifdef __KERNEL__".
Suggested-by: David Miller <davem@davemloft.net>
Signed-off-by: Ioana-Ruxandra Stăncioi <stancioi@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For retransmitted packets, TCP needs to resort to using TCP timestamps
for computing RTT samples. In the common case where the data and ACK
fall in the same 1-millisecond interval, TCP senders with millisecond-
granularity TCP timestamps compute a ca_rtt_us of 0. This ca_rtt_us
of 0 propagates to rs->rtt_us.
This value of 0 can cause performance problems for congestion control
modules. For example, in BBR, the zero min_rtt sample can bring the
min_rtt and BDP estimate down to 0, reduce snd_cwnd and result in a
low throughput. It would be hard to mitigate this with filtering in
the congestion control module, because the proper floor to apply would
depend on the method of RTT sampling (using timestamp options or
internally-saved transmission timestamps).
This fix applies a floor of 1 for the RTT sample delta from TCP
timestamps, so that seq_rtt_us, ca_rtt_us, and rs->rtt_us will be at
least 1 * (USEC_PER_SEC / TCP_TS_HZ).
Note that the receiver RTT computation in tcp_rcv_rtt_measure() and
min_rtt computation in tcp_update_rtt_min() both already apply a floor
of 1 timestamp tick, so this commit makes the code more consistent in
avoiding this edge case of a value of 0.
Signed-off-by: Jianfeng Wang <jfwang@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Kevin Yang <yyd@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Using is_broadcast_ether_addr() instead of directly use
memcmp() to determine if the ethernet address is broadcast
address.
spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)
Signed-off-by: Huang Guobin <huangguobin4@huawei.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
1) UAF in chain binding support from previous batch, from Dan Carpenter.
2) Queue up delayed work to expire connections with no destination,
from Andrew Sy Kim.
3) Use fallthrough pseudo-keyword, from Gustavo A. R. Silva.
4) Replace HTTP links with HTTPS, from Alexander A. Klimov.
5) Remove superfluous null header checks in ip6tables, from
Gaurav Singh.
6) Add extended netlink error reporting for expression.
7) Report EEXIST on overlapping chain, set elements and flowtable
devices.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a missing return statement to atalk_proc_init so it doesn't return
-ENOMEM when successful. This allows the appletalk module to load
properly.
Fixes: e2bcd8b0ce ("appletalk: use remove_proc_subtree to simplify procfs code")
Link: https://www.downtowndougbrown.com/2020/08/hacking-up-a-fix-for-the-broken-appletalk-kernel-module-in-linux-5-1-and-newer/
Reported-by: Christopher KOBAYASHI <chris@disavowed.jp>
Reported-by: Doug Brown <doug@downtowndougbrown.com>
Signed-off-by: Vincent Duvert <vincent.ldev@duvert.net>
[lukas: add missing tags]
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v5.1+
Cc: Yue Haibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When we don't care about vlan depth, we could pass NULL instead of the
address of a unused local variable to skb_network_protocol() as a param.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In fact, skb_pagelen() - skb_headlen() is equal to __skb_pagelen(), use it
directly to avoid unnecessary skb_headlen() call.
Also fix the CHECK note of checkpatch.pl:
Comparison to NULL could be written "!__pskb_pull_tail"
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The GRE tunnel can be used to transport traffic that does not rely on a
Internet checksum (e.g. SCTP). The issue can be triggered creating a GRE
or GRETAP tunnel and transmitting SCTP traffic ontop of it where CRC
offload has been disabled. In order to fix the issue we need to
recompute the GRE csum in gre_gso_segment() not relying on the inner
checksum.
The issue is still present when we have the CRC offload enabled.
In this case we need to disable the CRC offload if we require GRE
checksum since otherwise skb_checksum() will report a wrong value.
Fixes: 90017accff ("sctp: Add GSO support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We need to clear all of the bridge private skb variables as they can be
stale due to the packet being recirculated through the stack and then
transmitted through the bridge device. Similar memset is already done on
bridge's input. We've seen cases where proxyarp_replied was 1 on routed
multicast packets transmitted through the bridge to ports with neigh
suppress which were getting dropped. Same thing can in theory happen with
the port isolation bit as well.
Fixes: 821f1b21ca ("bridge: add new BR_NEIGH_SUPPRESS port flag to suppress arp and nd flood")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
"how" was used as a boolean. Change the type to bool, and improve
variable name
Signed-off-by: Florent Fourcot <florent.fourcot@wifirst.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Second parameter of addrconf_ifdown "how" is used as a boolean
internally. It does not make sense to call it with something different
of 0 or 1.
This value is set to 2 in all git history.
Signed-off-by: Florent Fourcot <florent.fourcot@wifirst.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch makes the masks cache size configurable, or with
a size of 0, disable it.
Reviewed-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a counter that counts the number of masks cache hits, and
export it through the megaflow netlink statistics.
Reviewed-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
info cannot be NULL here since its being accessed earlier
in the function: nlmsg_parse(info->nlhdr...). Remove this
redundant NULL check.
Signed-off-by: Gaurav Singh <gaurav1086@gmail.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
ovs_ct_put_key() is potentially copying uninitialized kernel stack memory
into socket buffers, since the compiler may leave a 3-byte hole at the end
of `struct ovs_key_ct_tuple_ipv4` and `struct ovs_key_ct_tuple_ipv6`. Fix
it by initializing `orig` with memset().
Fixes: 9dd7f8907c ("openvswitch: Add original direction conntrack tuple to sw_flow_key.")
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When openvswitch conntrack offload with act_ct action. Fragment packets
defrag in the ingress tc act_ct action and miss the next chain. Then the
packet pass to the openvswitch datapath without the mru. The over
mtu packet will be dropped in output action in openvswitch for over mtu.
"kernel: net2: dropped over-mtu packet: 1528 > 1500"
This patch add mru in the tc_skb_ext for adefrag and miss next chain
situation. And also add mru in the qdisc_skb_cb. The act_ct set the mru
to the qdisc_skb_cb when the packet defrag. And When the chain miss,
The mru is set to tc_skb_ext which can be got by ovs datapath.
Fixes: b57dc7c13e ("net/sched: Introduce action ct")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Improve uclamp performance by using a static key for the fast path
- Add the "sched_util_clamp_min_rt_default" sysctl, to optimize for
better power efficiency of RT tasks on battery powered devices.
(The default is to maximize performance & reduce RT latencies.)
- Improve utime and stime tracking accuracy, which had a fixed boundary
of error, which created larger and larger relative errors as the values
become larger. This is now replaced with more precise arithmetics,
using the new mul_u64_u64_div_u64() helper in math64.h.
- Improve the deadline scheduler, such as making it capacity aware
- Improve frequency-invariant scheduling
- Misc cleanups in energy/power aware scheduling
- Add sched_update_nr_running tracepoint to track changes to nr_running
- Documentation additions and updates
- Misc cleanups and smaller fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=PbO7
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Improve uclamp performance by using a static key for the fast path
- Add the "sched_util_clamp_min_rt_default" sysctl, to optimize for
better power efficiency of RT tasks on battery powered devices.
(The default is to maximize performance & reduce RT latencies.)
- Improve utime and stime tracking accuracy, which had a fixed boundary
of error, which created larger and larger relative errors as the
values become larger. This is now replaced with more precise
arithmetics, using the new mul_u64_u64_div_u64() helper in math64.h.
- Improve the deadline scheduler, such as making it capacity aware
- Improve frequency-invariant scheduling
- Misc cleanups in energy/power aware scheduling
- Add sched_update_nr_running tracepoint to track changes to nr_running
- Documentation additions and updates
- Misc cleanups and smaller fixes
* tag 'sched-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
sched/doc: Factorize bits between sched-energy.rst & sched-capacity.rst
sched/doc: Document capacity aware scheduling
sched: Document arch_scale_*_capacity()
arm, arm64: Fix selection of CONFIG_SCHED_THERMAL_PRESSURE
Documentation/sysctl: Document uclamp sysctl knobs
sched/uclamp: Add a new sysctl to control RT default boost value
sched/uclamp: Fix a deadlock when enabling uclamp static key
sched: Remove duplicated tick_nohz_full_enabled() check
sched: Fix a typo in a comment
sched/uclamp: Remove unnecessary mutex_init()
arm, arm64: Select CONFIG_SCHED_THERMAL_PRESSURE
sched: Cleanup SCHED_THERMAL_PRESSURE kconfig entry
arch_topology, sched/core: Cleanup thermal pressure definition
trace/events/sched.h: fix duplicated word
linux/sched/mm.h: drop duplicated words in comments
smp: Fix a potential usage of stale nr_cpus
sched/fair: update_pick_idlest() Select group with lowest group_util when idle_cpus are equal
sched: nohz: stop passing around unused "ticks" parameter.
sched: Better document ttwu()
sched: Add a tracepoint to track rq->nr_running
...
Now skb->dev is unconditionally set to the loopback device in current net
namespace. But if we want to test bpf program which contains code branch
based on ifindex condition (eg filters out localhost packets) it is useful
to allow specifying of ifindex from userspace. This patch adds such option
through ctx_in (__sk_buff) parameter.
Signed-off-by: Dmitry Yakunin <zeil@yandex-team.ru>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200803090545.82046-3-zeil@yandex-team.ru
Now it's impossible to test all branches of cgroup_skb bpf program which
accesses skb->family and skb->{local,remote}_ip{4,6} fields because they
are zeroed during socket allocation. This commit fills socket family and
addresses from related fields in constructed skb.
Signed-off-by: Dmitry Yakunin <zeil@yandex-team.ru>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200803090545.82046-2-zeil@yandex-team.ru
Pull crypto updates from Herbert Xu:
"API:
- Add support for allocating transforms on a specific NUMA Node
- Introduce the flag CRYPTO_ALG_ALLOCATES_MEMORY for storage users
Algorithms:
- Drop PMULL based ghash on arm64
- Fixes for building with clang on x86
- Add sha256 helper that does the digest in one go
- Add SP800-56A rev 3 validation checks to dh
Drivers:
- Permit users to specify NUMA node in hisilicon/zip
- Add support for i.MX6 in imx-rngc
- Add sa2ul crypto driver
- Add BA431 hwrng driver
- Add Ingenic JZ4780 and X1000 hwrng driver
- Spread IRQ affinity in inside-secure and marvell/cesa"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (157 commits)
crypto: sa2ul - Fix inconsistent IS_ERR and PTR_ERR
hwrng: core - remove redundant initialization of variable ret
crypto: x86/curve25519 - Remove unused carry variables
crypto: ingenic - Add hardware RNG for Ingenic JZ4780 and X1000
dt-bindings: RNG: Add Ingenic RNG bindings.
crypto: caam/qi2 - add module alias
crypto: caam - add more RNG hw error codes
crypto: caam/jr - remove incorrect reference to caam_jr_register()
crypto: caam - silence .setkey in case of bad key length
crypto: caam/qi2 - create ahash shared descriptors only once
crypto: caam/qi2 - fix error reporting for caam_hash_alloc
crypto: caam - remove deadcode on 32-bit platforms
crypto: ccp - use generic power management
crypto: xts - Replace memcpy() invocation with simple assignment
crypto: marvell/cesa - irq balance
crypto: inside-secure - irq balance
crypto: ecc - SP800-56A rev 3 local public key validation
crypto: dh - SP800-56A rev 3 local public key validation
crypto: dh - check validity of Z before export
lib/mpi: Add mpi_sub_ui()
...
mlx5 has the IANA VXLAN port (4789) hard coded by the device,
instead of being added dynamically when tunnels are created.
To support this add a workaround flag to struct udp_tunnel_nic_info.
Skipping updates for the port is fairly trivial, dumping the hard
coded port via ethtool requires some code duplication. The port
is not a part of any real table, we dump it in a special table
which has no tunnel types supported and only one entry.
This is the last known workaround / hack needed to convert
all drivers to the new infra.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
mac80211.h says: Beacon filter support is advertised with the
IEEE80211_VIF_BEACON_FILTER interface capability. The driver needs to
enable beacon filter support whenever power save is enabled, that is
IEEE80211_CONF_PS is set. When power save is enabled, the stack will
not check for beacon loss and the driver needs to notify about loss
of beacons with ieee80211_beacon_loss().
Some controllers may want to dynamically enable the beacon filter
capabilities on power save entry (CONF_PS) and disable it on exit.
This is the case for the wcn36xx driver which only supports beacon
filtering in PS mode (no CONNECTION_MONITOR support).
When the mac80211 beacon monitor timer expires, the beacon filter
flag must be checked again in case it as been changed in between
(e.g. vif moved to PS mode).
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Link: https://lore.kernel.org/r/1592471863-31402-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
On heavily loaded systems the GC can take time to go over all existing
conns and reset their timeout. At that time other calls like from
nf_conntrack_in() can call of nf_ct_is_expired() and see the conn as
expired. To fix this when we set the offload bit we should also reset
the timeout instead of counting on GC to finish first iteration over
all conns before the initial timeout.
Fixes: 90964016e5 ("netfilter: nf_conntrack: add IPS_OFFLOAD status bit")
Signed-off-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
To be used by callers from other modules.
[ Rename DAY to NF_CT_DAY to avoid possible symbol name pollution
issue --Pablo ]
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
[ idryomov: Do the same for the CRUSH paper and replace
ceph.newdream.net with ceph.io. ]
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The caller can just ignore the return. No need for this wrapper that
just casts the other function to void.
[ idryomov: argument alignment ]
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Instead of copying just oloc, oid and flags, copy the entire
linger target. This is more for consistency than anything else,
as send_linger() -> submit_request() -> __submit_request() sends
the request regardless of what calc_target() says (i.e. both on
CALC_TARGET_NO_ACTION and CALC_TARGET_NEED_RESEND).
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Sparse showed up with the following error.
net/mac80211/agg-rx.c:480:43: warning: Using plain integer as NULL pointer
Fixes: 2ab4587675 (mac80211: add support for the ADDBA extension element)
Signed-off-by: John Crispin <john@phrozen.org>
Link: https://lore.kernel.org/r/20200803084540.179908-1-john@phrozen.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
SAE authentication has been extended with H2E (IEEE 802.11 REVmd) and PK
(WFA) options. Those extensions use special status code values in the
SAE commit messages (Authentication frame with transaction sequence
number 1) to identify which extension is in use. mac80211 was
interpreting those new values as the AP denying authentication and that
resulted in failure to complete SAE authentication in some cases.
Fix this by adding exceptions for the new status code values 126 and
127.
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Link: https://lore.kernel.org/r/20200731183830.18735-1-jouni@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Replace EBUSY by EEXIST in the following cases:
- If the user adds a chain with a different configuration such as different
type, hook and priority.
- If the user adds a non-base chain that clashes with an existing basechain.
- If the user adds a { key : value } mapping element and the key exists
but the value differs.
- If the device already belongs to an existing flowtable.
User describe that this error reporting is confusing:
- https://bugzilla.netfilter.org/show_bug.cgi?id=1176
- https://bugzilla.netfilter.org/show_bug.cgi?id=1413
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add LINK_DETACH command to force-detach bpf_link without destroying it. It has
the same behavior as auto-detaching of bpf_link due to cgroup dying for
bpf_cgroup_link or net_device being destroyed for bpf_xdp_link. In such case,
bpf_link is still a valid kernel object, but is defuncts and doesn't hold BPF
program attached to corresponding BPF hook. This functionality allows users
with enough access rights to manually force-detach attached bpf_link without
killing respective owner process.
This patch implements LINK_DETACH for cgroup, xdp, and netns links, mostly
re-using existing link release handling code.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200731182830.286260-2-andriin@fb.com
This patch extends 36dd1bcc07 ("netfilter: nf_tables: initial support
for extended ACK reporting") to include netlink extended error reporting
for expressions. This allows userspace to identify what rule expression
is triggering the error.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pull networking fixes from David Miller:
1) Encap offset calculation is incorrect in esp6, from Sabrina Dubroca.
2) Better parameter validation in pfkey_dump(), from Mark Salyzyn.
3) Fix several clang issues on powerpc in selftests, from Tanner Love.
4) cmsghdr_from_user_compat_to_kern() uses the wrong length, from Al
Viro.
5) Out of bounds access in mlx5e driver, from Raed Salem.
6) Fix transfer buffer memleak in lan78xx, from Johan Havold.
7) RCU fixups in rhashtable, from Herbert Xu.
8) Fix ipv6 nexthop refcnt leak, from Xiyu Yang.
9) vxlan FDB dump must be done under RCU, from Ido Schimmel.
10) Fix use after free in mlxsw, from Ido Schimmel.
11) Fix map leak in HASH_OF_MAPS bpf code, from Andrii Nakryiko.
12) Fix bug in mac80211 Tx ack status reporting, from Vasanthakumar
Thiagarajan.
13) Fix memory leaks in IPV6_ADDRFORM code, from Cong Wang.
14) Fix bpf program reference count leaks in mlx5 during
mlx5e_alloc_rq(), from Xin Xiong.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (86 commits)
vxlan: fix memleak of fdb
rds: Prevent kernel-infoleak in rds_notify_queue_get()
net/sched: The error lable position is corrected in ct_init_module
net/mlx5e: fix bpf_prog reference count leaks in mlx5e_alloc_rq
net/mlx5e: E-Switch, Specify flow_source for rule with no in_port
net/mlx5e: E-Switch, Add misc bit when misc fields changed for mirroring
net/mlx5e: CT: Support restore ipv6 tunnel
net: gemini: Fix missing clk_disable_unprepare() in error path of gemini_ethernet_port_probe()
ionic: unlock queue mutex in error path
atm: fix atm_dev refcnt leaks in atmtcp_remove_persistent
net: ethernet: mtk_eth_soc: fix MTU warnings
net: nixge: fix potential memory leak in nixge_probe()
devlink: ignore -EOPNOTSUPP errors on dumpit
rxrpc: Fix race between recvmsg and sendmsg on immediate call failure
MAINTAINERS: Replace Thor Thayer as Altera Triple Speed Ethernet maintainer
selftests/bpf: fix netdevsim trap_flow_action_cookie read
ipv6: fix memory leaks on IPV6_ADDRFORM path
net/bpfilter: Initialize pos in __bpfilter_process_sockopt
igb: reinit_locked() should be called with rtnl_lock
e1000e: continue to init PHY even when failed to disable ULP
...
kernel test robot says:
net/mptcp/syncookies.c: In function 'mptcp_join_cookie_init':
include/linux/kernel.h:47:38: warning: division by zero [-Wdiv-by-zero]
#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]) + __must_be_array(arr))
I forgot that spinock_t size is 0 on UP, so ARRAY_SIZE cannot be used.
Fixes: 9466a1cceb ("mptcp: enable JOIN requests even if cookies are in use")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
It turns out that on commit 41d707b733 ("fib: fix fib_rules_ops
indirect calls wrappers") I forgot to include the case when
CONFIG_IP_MULTIPLE_TABLES is not set.
Fixes: 41d707b733 ("fib: fix fib_rules_ops indirect calls wrappers")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Brian Vazquez <brianvv@google.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes these errors:
net/ipv4/syncookies.c: In function 'tcp_get_cookie_sock':
net/ipv4/syncookies.c:216:19: error: 'struct tcp_request_sock' has no
member named 'drop_req'
216 | if (tcp_rsk(req)->drop_req) {
| ^~
net/ipv4/syncookies.c: In function 'cookie_tcp_reqsk_alloc':
net/ipv4/syncookies.c:289:27: warning: unused variable 'treq'
[-Wunused-variable]
289 | struct tcp_request_sock *treq;
| ^~~~
make[3]: *** [scripts/Makefile.build:280: net/ipv4/syncookies.o] Error 1
make[3]: *** Waiting for unfinished jobs....
Fixes: 9466a1cceb ("mptcp: enable JOIN requests even if cookies are in use")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Florian Westphal <fw@strlen.de>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
* code cleanups and fixups as usual
* AQL & internal TXQ improvements from Felix
* some mesh 802.1X support bits
* some injection improvements from Mathy of KRACK
fame, so we'll see what this results in ;-)
* some more initial S1G supports bits, this time
(some of?) the userspace APIs
-----BEGIN PGP SIGNATURE-----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=FR6T
-----END PGP SIGNATURE-----
Merge tag 'mac80211-next-for-davem-2020-07-31' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
We have a number of changes
* code cleanups and fixups as usual
* AQL & internal TXQ improvements from Felix
* some mesh 802.1X support bits
* some injection improvements from Mathy of KRACK
fame, so we'll see what this results in ;-)
* some more initial S1G supports bits, this time
(some of?) the userspace APIs
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
netdev protodown is a mechanism that allows protocols to
hold an interface down. It was initially introduced in
the kernel to hold links down by a multihoming protocol.
There was also an attempt to introduce protodown
reason at the time but was rejected. protodown and protodown reason
is supported by almost every switching and routing platform.
It was ok for a while to live without a protodown reason.
But, its become more critical now given more than
one protocol may need to keep a link down on a system
at the same time. eg: vrrp peer node, port security,
multihoming protocol. Its common for Network operators and
protocol developers to look for such a reason on a networking
box (Its also known as errDisable by most networking operators)
This patch adds support for link protodown reason
attribute. There are two ways to maintain protodown
reasons.
(a) enumerate every possible reason code in kernel
- A protocol developer has to make a request and
have that appear in a certain kernel version
(b) provide the bits in the kernel, and allow user-space
(sysadmin or NOS distributions) to manage the bit-to-reasonname
map.
- This makes extending reason codes easier (kind of like
the iproute2 table to vrf-name map /etc/iproute2/rt_tables.d/)
This patch takes approach (b).
a few things about the patch:
- It treats the protodown reason bits as counter to indicate
active protodown users
- Since protodown attribute is already an exposed UAPI,
the reason is not enforced on a protodown set. Its a no-op
if not used.
the patch follows the below algorithm:
- presence of reason bits set indicates protodown
is in use
- user can set protodown and protodown reason in a
single or multiple setlink operations
- setlink operation to clear protodown, will return -EBUSY
if there are active protodown reason bits
- reason is not included in link dumps if not used
example with patched iproute2:
$cat /etc/iproute2/protodown_reasons.d/r.conf
0 mlag
1 evpn
2 vrrp
3 psecurity
$ip link set dev vxlan0 protodown on protodown_reason vrrp on
$ip link set dev vxlan0 protodown_reason mlag on
$ip link show
14: vxlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode
DEFAULT group default qlen 1000
link/ether f6:06:be:17:91:e7 brd ff:ff:ff:ff:ff:ff protodown on <mlag,vrrp>
$ip link set dev vxlan0 protodown_reason mlag off
$ip link set dev vxlan0 protodown off protodown_reason vrrp off
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf 2020-07-31
The following pull-request contains BPF updates for your *net* tree.
We've added 5 non-merge commits during the last 21 day(s) which contain
a total of 5 files changed, 126 insertions(+), 18 deletions(-).
The main changes are:
1) Fix a map element leak in HASH_OF_MAPS map type, from Andrii Nakryiko.
2) Fix a NULL pointer dereference in __btf_resolve_helper_id() when no
btf_vmlinux is available, from Peilin Ye.
3) Init pos variable in __bpfilter_process_sockopt(), from Christoph Hellwig.
4) Fix a cgroup sockopt verifier test by specifying expected attach type,
from Jean-Philippe Brucker.
Note that when net gets merged into net-next later on, there is a small
merge conflict in kernel/bpf/btf.c between commit 5b801dfb7f ("bpf: Fix
NULL pointer dereference in __btf_resolve_helper_id()") from the bpf tree
and commit 138b9a0511 ("bpf: Remove btf_id helpers resolving") from the
net-next tree.
Resolve as follows: remove the old hunk with the __btf_resolve_helper_id()
function. Change the btf_resolve_helper_id() so it actually tests for a
NULL btf_vmlinux and bails out:
int btf_resolve_helper_id(struct bpf_verifier_log *log,
const struct bpf_func_proto *fn, int arg)
{
int id;
if (fn->arg_type[arg] != ARG_PTR_TO_BTF_ID || !btf_vmlinux)
return -EINVAL;
id = fn->btf_id[arg];
if (!id || id > btf_vmlinux->nr_types)
return -EINVAL;
return id;
}
Let me know if you run into any others issues (CC'ing Jiri Olsa so he's in
the loop with regards to merge conflict resolution).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net): ipsec 2020-07-31
1) Fix policy matching with mark and mask on userspace interfaces.
From Xin Long.
2) Several fixes for the new ESP in TCP encapsulation.
From Sabrina Dubroca.
3) Fix crash when the hold queue is used. The assumption that
xdst->path and dst->child are not a NULL pointer only if dst->xfrm
is not a NULL pointer is true with the exception of using the
hold queue. Fix this by checking for hold queue usage before
dereferencing xdst->path or dst->child.
4) Validate pfkey_dump parameter before sending them.
From Mark Salyzyn.
5) Fix the location of the transport header with ESP in UDPv6
encapsulation. From Sabrina Dubroca.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This change adds TCP_NLA_EDT to SCM_TIMESTAMPING_OPT_STATS that reports
the earliest departure time(EDT) of the timestamped skb. By tracking EDT
values of the skb from different timestamps, we can observe when and how
much the value changed. This allows to measure the precise delay
injected on the sender host e.g. by a bpf-base throttler.
Signed-off-by: Yousuk Seung <ysseung@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
JOIN requests do not work in syncookie mode -- for HMAC validation, the
peers nonce and the mptcp token (to obtain the desired connection socket
the join is for) are required, but this information is only present in the
initial syn.
So either we need to drop all JOIN requests once a listening socket enters
syncookie mode, or we need to store enough state to reconstruct the request
socket later.
This adds a state table (1024 entries) to store the data present in the
MP_JOIN syn request and the random nonce used for the cookie syn/ack.
When a MP_JOIN ACK passed cookie validation, the table is consulted
to rebuild the request socket from it.
An alternate approach would be to "cancel" syn-cookie mode and force
MP_JOIN to always use a syn queue entry.
However, doing so brings the backlog over the configured queue limit.
v2: use req->syncookie, not (removed) want_cookie arg
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If SYN packet contains MP_CAPABLE option, keep it enabled.
Syncokie validation and cookie-based socket creation is changed to
instantiate an mptcp request sockets if the ACK contains an MPTCP
connection request.
Rather than extend both cookie_v4/6_check, add a common helper to create
the (mp)tcp request socket.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Will be used to initialize the mptcp request socket when a MP_CAPABLE
request was handled in syncookie mode, i.e. when a TCP ACK containing a
MP_CAPABLE option is a valid syncookie value.
Normally (non-cookie case), MPTCP will generate a unique 32 bit connection
ID and stores it in the MPTCP token storage to be able to retrieve the
mptcp socket for subflow joining.
In syncookie case, we do not want to store any state, so just generate the
unique ID and use it in the reply.
This means there is a small window where another connection could generate
the same token.
When Cookie ACK comes back, we check that the token has not been registered
in the mean time. If it was, the connection needs to fall back to TCP.
Changes in v2:
- use req->syncookie instead of passing 'want_cookie' arg to ->init_req()
(Eric Dumazet)
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
syncookie code path needs to create an mptcp request sock.
Prepare for this and add mptcp prefix plus needed export of ops struct.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When syncookie support is added, we will need to add a variant of
subflow_init_req() helper. It will do almost same thing except
that it will not compute/add a token to the mptcp token tree.
To avoid excess copy&paste, this commit splits away part of the
code into a new helper, __subflow_init_req, that can then be re-used
from the 'no insert' function added in a followup change.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Once syncookie support is added, no state will be stored anymore when the
syn/ack is generated in syncookie mode.
When the ACK comes back, the generated key will be taken from the TCP ACK,
the token is re-generated and inserted into the token tree.
This means we can't retry with a new key when the token is already taken
in the syncookie case.
Therefore, move the retry logic to the caller to prepare for syncookie
support in mptcp.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nowadays output function has a 'synack_type' argument that tells us when
the syn/ack is emitted via syncookies.
The request already tells us when timestamps are supported, so check
both to detect special timestamp for tcp option encoding is needed.
We could remove cookie_ts altogether, but a followup patch would
otherwise need to adjust function signatures to pass 'want_cookie' to
mptcp core.
This way, the 'existing' bit can be used.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
rds_notify_queue_get() is potentially copying uninitialized kernel stack
memory to userspace since the compiler may leave a 4-byte hole at the end
of `cmsg`.
In 2016 we tried to fix this issue by doing `= { 0 };` on `cmsg`, which
unfortunately does not always initialize that 4-byte hole. Fix it by using
memset() instead.
Cc: stable@vger.kernel.org
Fixes: f037590fff ("rds: fix a leak of kernel memory")
Fixes: bdbe6fbc6a ("RDS: recv.c")
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make use of the struct_size() helper, in multiple places, instead
of an open-coded version in order to avoid any potential type
mistakes and protect against potential integer overflows.
Also, remove unnecessary object identifier size.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert to %pM instead of using custom code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When we don't care about vlan depth, we could pass NULL instead of the
address of a unused local variable to skb_network_protocol() as a param.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Exchange the positions of the err_tbl_init and err_register labels in
ct_init_module function.
Fixes: c34b961a24 ("net/sched: act_ct: Create nf flow table per zone")
Signed-off-by: liujian <liujian56@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net/bluetooth/sco.c: In function ‘sco_sock_setsockopt’:
net/bluetooth/sco.c:862:3: error: cannot convert to a pointer type
862 | if (get_user(opt, (u32 __user *)optval)) {
| ^~
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hedberg says:
====================
pull request: bluetooth-next 2020-07-31
Here's the main bluetooth-next pull request for 5.9:
- Fix firmware filenames for Marvell chipsets
- Several suspend-related fixes
- Addedd mgmt commands for runtime configuration
- Multiple fixes for Qualcomm-based controllers
- Add new monitoring feature for mgmt
- Fix handling of legacy cipher (E4) together with security level 4
- Add support for Realtek 8822CE controller
- Fix issues with Chinese controllers using fake VID/PID values
- Multiple other smaller fixes & improvements
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira found that after recent update of xt_IDLETIMER the
iptables-nft tests sometimes show an error.
He tracked this down to the delayed cleanup used by nf_tables core:
del rule (transaction A)
add rule (transaction B)
Its possible that by time transaction B (both in same netns) runs,
the xt target destructor has not been invoked yet.
For native nft expressions this is no problem because all expressions
that have such side effects make sure these are handled from the commit
phase, rather than async cleanup.
For nft_compat however this isn't true.
Instead of forcing synchronous behaviour for nft_compat, keep track
of the number of outstanding destructor calls.
When we attempt to create a new expression, flush the cleanup worker
to make sure destructors have completed.
With lots of help from Pablo Neira.
Reported-by: Pablo Neira Ayso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The flag CRYPTO_ALG_INTERNAL is not meant to be used outside of
the Crypto API. It isn't needed here anyway.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Increment the mgmt revision due to the recently added new commands.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Ben Greear has repeatedly reported in the past (for a few years
probably) that this triggers repeatedly in certain scenarios.
Make this a macro so that each callsite can trigger the warning
only once - that will still give us an idea of what's going on
and what paths can reach it, but avoids being too noisy.
Link: https://lore.kernel.org/r/20200730155212.06fd3a95dbfb.I0b16829aabfaf5f642bce401502a29d16e2dd444@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Let drivers advertise support for AP-mode WPA/WPA2-PSK 4-way handshake
offloading with a new NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK flag.
Extend use of NL80211_ATTR_PMK attribute indicating it might be passed
as part of NL80211_CMD_START_AP command, and contain the PSK (which is
the PMK, hence the name).
The driver is assumed to handle the 4-way handshake by itself in this
case, instead of relying on userspace.
Signed-off-by: Chung-Hsien Hsu <stanley.hsu@cypress.com>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Link: https://lore.kernel.org/r/20200623134938.39997-2-chi-hsien.lin@cypress.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is in fact 'disabled' in the spec, but there it's in a
place where that actually makes sense. In our internal data
structures, it doesn't really make sense, and in fact the
previous commit just fixed a bug in that area.
Make this safer by inverting the polarity from 'disabled' to
'enabled'.
Link: https://lore.kernel.org/r/20200730130051.5d8399545bd9.Ie62fdcd1a6cd9c969315bc124084a494ca6c8df3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This can be used to run mac80211 rx processing on a batch of frames in NAPI
poll before passing them to the network stack in a large batch.
This can improve icache footprint, or it can be used to pass frames via
netif_receive_skb_list.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20200726110611.46886-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Already parse the radiotap header in ieee80211_monitor_select_queue.
In a subsequent commit this will allow us to add a radiotap flag that
influences the queue on which injected packets will be sent.
This also fixes the incomplete validation of the injected frame in
ieee80211_monitor_select_queue: currently an out of bounds memory
access may occur in in the called function ieee80211_select_queue_80211
if the 802.11 header is too small.
Note that in ieee80211_monitor_start_xmit the radiotap header is parsed
again, which is necessairy because ieee80211_monitor_select_queue is not
always called beforehand.
Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
Link: https://lore.kernel.org/r/20200723100153.31631-6-Mathy.Vanhoef@kuleuven.be
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Use the IEEE80211_TX_CTRL_NO_SEQNO flag in ieee80211_tx_info to mark
probe requests whose sequence number must not be overwritten. This
provides consistency with the radiotap flag that can be set to indicate
that the sequence number of an injected frame should not be overwritten.
Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
Link: https://lore.kernel.org/r/20200723100153.31631-4-Mathy.Vanhoef@kuleuven.be
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Check if the Tx control flag is set to prevent sequence number overwrites,
and if so, do not assign a new sequence number to the transmitted frame.
Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
Link: https://lore.kernel.org/r/20200723100153.31631-3-Mathy.Vanhoef@kuleuven.be
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The radiotap specification contains a flag to indicate that the sequence
number of an injected frame should not be overwritten. Parse this flag
and define and set a corresponding Tx control flag.
Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
Link: https://lore.kernel.org/r/20200723100153.31631-2-Mathy.Vanhoef@kuleuven.be
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In ieee80211_tx_dequeue there is a check to see if the dequeued frame
is allowed in the current state. Injected frames that are normally
not allowed are being be dropped here. Fix this by checking if a
frame was injected and if so always allowing it.
Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
Link: https://lore.kernel.org/r/20200723100153.31631-1-Mathy.Vanhoef@kuleuven.be
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Adding bss-color configuration is only valid in HE mode.
Earlier we have enabled it by default, irrespective of
capabilities/mode. Fix that.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
Signed-off-by: P Praneesh <ppranees@codeaurora.org>
Link: https://lore.kernel.org/r/1594262781-21444-1-git-send-email-ppranees@codeaurora.org
[fix up commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
AQL does not take into account that most HT/VHT/HE traffic is A-MPDU aggregated.
Because of that, the per-packet airtime overhead is vastly overestimated.
Improve it by assuming an average aggregation length of 16 for non-legacy
traffic if not using the VO AC queue.
This should improve performance with high data rates, especially with multiple
stations
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20200724182816.18678-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Besides information about num of peerings and gate connectivity,
the mesh formation byte also contains a flag for authentication
server connectivity, that currently cannot be set in the mesh conf.
This patch adds this capability, which is necessary to implement
802.1X authentication in mesh mode.
Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
Link: https://lore.kernel.org/r/20200611140238.427461-1-markus.theil@tu-ilmenau.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, before being able to forward a packet between two 802.11s
nodes, both a PLINK handshake is performed upon receiving a beacon and
then later a PREQ/PREP exchange for path discovery is performed on
demand upon receiving a data frame to forward.
When running a mesh protocol on top of an 802.11s interface, like
batman-adv, we do not need the multi-hop mesh routing capabilities of
802.11s and usually set mesh_fwding=0. However, even with mesh_fwding=0
the PREQ/PREP path discovery is still performed on demand. Even though
in this scenario the next hop PREQ/PREP will determine is always the
direct 11s neighbor node.
The new mesh_nolearn parameter allows to skip the PREQ/PREP exchange in
this scenario, leading to a reduced delay, reduced packet buffering and
simplifies HWMP in general.
mesh_nolearn is still rather conservative in that if the packet destination
is not a direct 11s neighbor, it will fall back to PREQ/PREP path
discovery.
For normal, multi-hop 802.11s mesh routing it is usually not advisable
to enable mesh_nolearn as a transmission to a direct but distant neighbor
might be worse than reaching that same node via a more robust /
higher throughput etc. multi-hop path.
Cc: Sven Eckelmann <sven@narfation.org>
Cc: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Linus Lüssing <ll@simonwunderlich.de>
Link: https://lore.kernel.org/r/20200617073034.26149-1-linus.luessing@c0d3.blue
[fix nl80211 policy to range 0/1 only]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The low level driver adds its own opaque information
in the BSS table in the cfg80211_bss structure.
The low level driver may need to signal that this information
is no longer relevant and needs to be recreated.
Add an API to allow the low level driver to do that.
iwlwifi needs this because it keeps there an information about
the firmware's internal clock. This is kept in mac80211's
struct ieee80211_bss::sync_device_ts.
This information is populated while we scan, we add the
internal firmware's clock to each beacon which allows us to
program the firmware correctly after association so that
it'll know when (in terms of its internal clock) the DTIM
and TBTT will happen.
When the firmware is reset this internal clock is reset as
well and ieee80211_bss::sync_device_ts is no longer accurate.
iwlwifi will call this new API any time the firmware is started.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://lore.kernel.org/r/20200625111524.3992-1-emmanuel.grumbach@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Re-write the end of 'nl80211_trigger_scan()' with a more standard, easy to
understand and future proof version.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20200712173551.274448-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since commit 5fe231e873 ("cfg80211: vastly simplify locking"), the
'unlock' label at the end of 'nl80211_trigger_scan()' is useless and
misleading, because nothing is unlocked there.
Direct return can be used instead of 'err = -<error code>; goto unlock;'
construction.
Remove this label and simplify code accordingly.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20200712173539.274395-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
nl80211 vendor netlink dumpit, like netlink_callback->dump, should
signal successful completion by returning 0.
Currently, that will just cause dumpit to be called again, possibly
many times until an error occurs. Since skb->len is never going to be
0 by the time dumpit is called, the only way for dumpit to signal
completion is by returning an error. If it returns a positive value,
the current message is cancelled, but that positive value is returned
and nl80211_vendor_cmd_dump gets called again.
Fix that by passing a return value of 0 through.
Signed-off-by: Julian Squires <julian@cipht.net>
Link: https://lore.kernel.org/r/20200720145033.401307-1-julian@cipht.net
[reword commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently rates_idx is being initialized with the value -1 and this
value is never read so the initialization is redundant and can be
removed. The next time the variable is used it is assigned a value
that is returned a few statements later. Just return i - 1 and
remove the need for rates_idx.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200722153830.959010-1-colin.king@canonical.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When an LE connection is requested and an RPA update is needed via
hci_connect_le_scan, the default scanning parameters are used rather
than the connect parameters. This leads to significant delays in the
connection establishment process when using lower duty cycle scanning
parameters.
The patch simply looks at the pended connection list when trying to
determine which scanning parameters should be used.
Before:
< HCI Command: LE Set Extended Scan Parameters (0x08|0x0041) plen 8
#378 [hci0] 1659.247156
Own address type: Public (0x00)
Filter policy: Ignore not in white list (0x01)
PHYs: 0x01
Entry 0: LE 1M
Type: Passive (0x00)
Interval: 367.500 msec (0x024c)
Window: 37.500 msec (0x003c)
After:
< HCI Command: LE Set Extended Scan Parameters (0x08|0x0041) plen 8
#39 [hci0] 7.422109
Own address type: Public (0x00)
Filter policy: Ignore not in white list (0x01)
PHYs: 0x01
Entry 0: LE 1M
Type: Passive (0x00)
Interval: 60.000 msec (0x0060)
Window: 60.000 msec (0x0060)
Signed-off-by: Alain Michaud <alainm@chromium.org>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: Yu Liu <yudiliu@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* remove a warning that can trigger in certain races
* check a function pointer before using it
* check before adding 6 GHz to avoid a warning in mesh
* fix two memory leaks in mesh
* fix a TX status bug leading to a memory leak
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEH1e1rEeCd0AIMq6MB8qZga/fl8QFAl8i4fUACgkQB8qZga/f
l8TryA/+NVsEyCUgXRH4ZanXAGpC3QB7925f2THbgkOgdlKwR1iKGtmwZVIQKwl4
DdxUql/6C02l4fW+OBz23ohKkb9MixpSwiYjHKeqlC5EeNvmzLujG0A/X+Qvj/j0
iuttFNJxrwQ7ZCzqKbsufRL9BfWwaIVYB62HFd4gR/FBnPwNhZPlHLJMyzT54eIC
ZdDQ8ynqij3uB2BS31J2l3clwO7iOg1ek81DsTgLp3nCGqIDwJzYMRqrVh5+9I1j
yAwE9TCBxv8eEGJIFwpF+Yl0ffPvYXT0DjjeRQMOG7lIDa25orbIT8zHSt83y7My
6Rq+8Paw8Z2bQO0Z7EN3ys4fgqMqY1TTVzrTpF0XQaW+CnEdc3mvRN9UGDiViNcP
JO9QH7RlCV+CQld/I5F/b3kbpt9DP+TFQyVaE62+OhgG5TCf7upJ7XmHK9IpoX7A
cSjJxV8isWLzILTWLiHFXEkyCbdIYeq8PSvuIvJcxOH8hIQ+Si8Rv01K2Wvp0QpM
mReW4MYbpHPju88aBl82Tl1fUwfQNfaMp41iN+b2zBS4xB4+zmTFnpq0lIS7azT/
8Zx+9mlJKUd+YTTKcMvUrwJ2dH8b7w5bEllf5WAEGbLubo+dhgsZ+6PuLRrw/8J7
ujINEQTT+UarZWgevyCG6j/c229UiSfaQNCeoADUAhW4wMCPm3E=
=xoMY
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-davem-2020-07-30' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
A couple of more changes:
* remove a warning that can trigger in certain races
* check a function pointer before using it
* check before adding 6 GHz to avoid a warning in mesh
* fix two memory leaks in mesh
* fix a TX status bug leading to a memory leak
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Make use of the flex_array_size() helper to calculate the size of a
flexible array member within an enclosing structure.
This helper offers defense-in-depth against potential integer
overflows, while at the same time makes it explicitly clear that
we are dealing with a flexible array member.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When BPF sk lookup invokes reuseport handling for the selected socket, it
should ignore the fact that reuseport group can contain connected UDP
sockets. With BPF sk lookup this is not relevant as we are not scoring
sockets to find the best match, which might be a connected UDP socket.
Fix it by unconditionally accepting the socket selected by reuseport.
This fixes the following two failures reported by test_progs.
# ./test_progs -t sk_lookup
...
#73/14 UDP IPv4 redir and reuseport with conns:FAIL
...
#73/20 UDP IPv6 redir and reuseport with conns:FAIL
...
Fixes: a57066b1a0 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net")
Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200726120228.1414348-1-jakub@cloudflare.com
Number of .dumpit functions try to ignore -EOPNOTSUPP errors.
Recent change missed that, and started reporting all errors
but -EMSGSIZE back from dumps. This leads to situation like
this:
$ devlink dev info
devlink answers: Operation not supported
Dump should not report an error just because the last device
to be queried could not provide an answer.
To fix this and avoid similar confusion make sure we clear
err properly, and not leave it set to an error if we don't
terminate the iteration.
Fixes: c62c2cfb80 ("net: devlink: don't ignore errors during dumpit")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There's a race between rxrpc_sendmsg setting up a call, but then failing to
send anything on it due to an error, and recvmsg() seeing the call
completion occur and trying to return the state to the user.
An assertion fails in rxrpc_recvmsg() because the call has already been
released from the socket and is about to be released again as recvmsg deals
with it. (The recvmsg_q queue on the socket holds a ref, so there's no
problem with use-after-free.)
We also have to be careful not to end up reporting an error twice, in such
a way that both returns indicate to userspace that the user ID supplied
with the call is no longer in use - which could cause the client to
malfunction if it recycles the user ID fast enough.
Fix this by the following means:
(1) When sendmsg() creates a call after the point that the call has been
successfully added to the socket, don't return any errors through
sendmsg(), but rather complete the call and let recvmsg() retrieve
them. Make sendmsg() return 0 at this point. Further calls to
sendmsg() for that call will fail with ESHUTDOWN.
Note that at this point, we haven't send any packets yet, so the
server doesn't yet know about the call.
(2) If sendmsg() returns an error when it was expected to create a new
call, it means that the user ID wasn't used.
(3) Mark the call disconnected before marking it completed to prevent an
oops in rxrpc_release_call().
(4) recvmsg() will then retrieve the error and set MSG_EOR to indicate
that the user ID is no longer known by the kernel.
An oops like the following is produced:
kernel BUG at net/rxrpc/recvmsg.c:605!
...
RIP: 0010:rxrpc_recvmsg+0x256/0x5ae
...
Call Trace:
? __init_waitqueue_head+0x2f/0x2f
____sys_recvmsg+0x8a/0x148
? import_iovec+0x69/0x9c
? copy_msghdr_from_user+0x5c/0x86
___sys_recvmsg+0x72/0xaa
? __fget_files+0x22/0x57
? __fget_light+0x46/0x51
? fdget+0x9/0x1b
do_recvmmsg+0x15e/0x232
? _raw_spin_unlock+0xa/0xb
? vtime_delta+0xf/0x25
__x64_sys_recvmmsg+0x2c/0x2f
do_syscall_64+0x4c/0x78
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: 357f5ef646 ("rxrpc: Call rxrpc_release_call() on error in rxrpc_new_client_call()")
Reported-by: syzbot+b54969381df354936d96@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* Improve the description of the key l2tp subsystem data structures.
* Add high-level description of the main APIs for interacting with l2tp
core.
* Add documentation for the l2tp netlink session command callbacks.
* Document the session pseudowire callbacks.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All of the l2tp subsystem's exported symbols are exported using
EXPORT_SYMBOL_GPL, except for l2tp_recv_common and l2tp_ioctl.
These functions alone are not useful without the rest of the l2tp
infrastructure, so there's no practical benefit to these symbols using a
different export policy.
Change these exports to use EXPORT_SYMBOL_GPL for consistency with the
rest of l2tp.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The structure of an L2TP data packet header varies depending on the
version of the L2TP protocol being used.
struct l2tp_session used to have a build_header callback to abstract
this difference away. It's clearer to simply choose the correct
function to use when building the data packet (and we save on the
function pointer in the session structure).
This approach does mean dereferencing the parent tunnel structure in
order to determine the tunnel version, but we're doing that in the
transmit path in any case.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp_session_delete is used to schedule a session instance for deletion.
The function itself always returns zero, and none of its direct callers
check its return value, so have the function return void.
This change de-facto changes the l2tp netlink session_delete callback
prototype since all pseudowires currently use l2tp_session_delete for
their implementation of that operation.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tunnel and session instances are reference counted, and shouldn't be
directly freed by pseudowire code.
Rather than exporting l2tp_tunnel_free and l2tp_session_free, make them
private to l2tp_core.c, and export the refcount functions instead.
In order to do this, the refcount functions cannot be declared as
inline. Since the codepaths which take and drop tunnel and session
references are not directly in the datapath this shouldn't cause
performance issues.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When __l2tp_session_unhash was first added it was used outside of
l2tp_core.c, but that's no longer the case.
As such, there's no longer a need to export the function. Make it
private inside l2tp_core.c, and relocate it to avoid having to declare
the function prototype in l2tp_core.h.
Since the function is no longer used outside l2tp_core.c, remove the
"__" prefix since we don't need to indicate anything special about its
expected use to callers.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IPV6_ADDRFORM causes resource leaks when converting an IPv6 socket
to IPv4, particularly struct ipv6_ac_socklist. Similar to
struct ipv6_mc_socklist, we should just close it on this path.
This bug can be easily reproduced with the following C program:
#include <stdio.h>
#include <string.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <arpa/inet.h>
int main()
{
int s, value;
struct sockaddr_in6 addr;
struct ipv6_mreq m6;
s = socket(AF_INET6, SOCK_DGRAM, 0);
addr.sin6_family = AF_INET6;
addr.sin6_port = htons(5000);
inet_pton(AF_INET6, "::ffff:192.168.122.194", &addr.sin6_addr);
connect(s, (struct sockaddr *)&addr, sizeof(addr));
inet_pton(AF_INET6, "fe80::AAAA", &m6.ipv6mr_multiaddr);
m6.ipv6mr_interface = 5;
setsockopt(s, SOL_IPV6, IPV6_JOIN_ANYCAST, &m6, sizeof(m6));
value = AF_INET;
setsockopt(s, SOL_IPV6, IPV6_ADDRFORM, &value, sizeof(value));
close(s);
return 0;
}
Reported-by: ch3332xr@gmail.com
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
__bpfilter_process_sockopt never initialized the pos variable passed
to the pipe write. This has been mostly harmless in the past as pipes
ignore the offset, but the switch to kernel_write now verified the
position, which can lead to a failure depending on the exact stack
initialization pattern. Initialize the variable to zero to make
rw_verify_area happy.
Fixes: 6955a76fbc ("bpfilter: switch to kernel_write")
Reported-by: Christian Brauner <christian.brauner@ubuntu.com>
Reported-by: Rodrigo Madera <rodrigo.madera@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Rodrigo Madera <rodrigo.madera@gmail.com>
Tested-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/bpf/20200730160900.187157-1-hch@lst.de
This lets us use socket storage from the following hooks:
* BPF_CGROUP_INET_SOCK_CREATE
* BPF_CGROUP_INET_SOCK_RELEASE
* BPF_CGROUP_INET4_POST_BIND
* BPF_CGROUP_INET6_POST_BIND
Using existing 'bpf_sk_storage_get_proto' doesn't work because
second argument is ARG_PTR_TO_SOCKET. Even though
BPF_PROG_TYPE_CGROUP_SOCK hooks operate on 'struct bpf_sock',
the verifier still considers it as a PTR_TO_CTX.
That's why I'm adding another 'bpf_sk_storage_get_cg_sock_proto'
definition strictly for BPF_PROG_TYPE_CGROUP_SOCK which accepts
ARG_PTR_TO_CTX which is really 'struct sock' for this program type.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200729003104.1280813-1-sdf@google.com
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2020-07-30
Please note that I did the first time now --no-ff merges
of my testing branch into the master branch to include
the [PATCH 0/n] message of a patchset. Please let me
know if this is desirable, or if I should do it any
different.
1) Introduce a oseq-may-wrap flag to disable anti-replay
protection for manually distributed ICVs as suggested
in RFC 4303. From Petr Vaněk.
2) Patchset to fully support IPCOMP for vti4, vti6 and
xfrm interfaces. From Xin Long.
3) Switch from a linear list to a hash list for xfrm interface
lookups. From Eyal Birger.
4) Fixes to not register one xfrm(6)_tunnel object twice.
From Xin Long.
5) Fix two compile errors that were introduced with the
IPCOMP support for vti and xfrm interfaces.
Also from Xin Long.
6) Make the policy hold queue work with VTI. This was
forgotten when VTI was implemented.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This converts all the existing DECLARE_TASKLET() (and ...DISABLED)
macros with DECLARE_TASKLET_OLD() in preparation for refactoring the
tasklet callback type. All existing DECLARE_TASKLET() users had a "0"
data argument, it has been removed here as well.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
This patch adds support to enable the use of RPA Address resolution
using expermental feature mgmt command.
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This warning can trigger if there is a mismatch between frames that were
sent with the sta pointer set vs tx status frames reported for the sta address.
This can happen due to race conditions on re-creating stations, or even
in the case of .sta_add/remove being used instead of .sta_state, which can cause
frames to be sent to a station that has not been uploaded yet.
If there is an actual underflow issue, it should show up in the device airtime
warning below, so it is better to remove this one.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20200725084533.13829-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Allocated ack_frame id from local->ack_status_frames is not really
stored in the tx_info for 802.3 Tx path. Due to this, tx ack status
is not reported and ack_frame id is not freed for the buffers requiring
tx ack status. Also move the memset to 0 of tx_info before
IEEE80211_TX_CTL_REQ_TX_STATUS flag assignment.
Fixes: 50ff477a86 ("mac80211: add 802.11 encapsulation offloading support")
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org>
Link: https://lore.kernel.org/r/1595427617-1713-1-git-send-email-vthiagar@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In the case where a vendor command does not implement doit, and has no
flags set, doit would not be validated and a NULL pointer dereference
would occur, for example when invoking the vendor command via iw.
I encountered this while developing new vendor commands. Perhaps in
practice it is advisable to always implement doit along with dumpit,
but it seems reasonable to me to always check doit anyway, not just
when NEED_WDEV.
Signed-off-by: Julian Squires <julian@cipht.net>
Link: https://lore.kernel.org/r/20200706211353.2366470-1-julian@cipht.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The commit 24a2042cb2 ("mac80211: add HE 6 GHz Band Capability
element") failed to check device capability before adding HE 6 GHz
capability element. Below warning is reported in 11ac device in mesh.
Fix that by checking device capability at HE 6 GHz cap IE addition
in mesh beacon and association request.
WARNING: CPU: 1 PID: 1897 at net/mac80211/util.c:2878
ieee80211_ie_build_he_6ghz_cap+0x149/0x150 [mac80211]
[ 3138.720358] Call Trace:
[ 3138.720361] ieee80211_mesh_build_beacon+0x462/0x530 [mac80211]
[ 3138.720363] ieee80211_start_mesh+0xa8/0xf0 [mac80211]
[ 3138.720365] __cfg80211_join_mesh+0x122/0x3e0 [cfg80211]
[ 3138.720368] nl80211_join_mesh+0x3d3/0x510 [cfg80211]
Fixes: 24a2042cb2 ("mac80211: add HE 6 GHz Band Capability element")
Reported-by: Markus Theil <markus.theil@tu-ilmenau.de>
Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
Link: https://lore.kernel.org/r/1593656424-18240-1-git-send-email-rmanohar@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Enable RPA timeout during bluetooth initialization.
The RPA timeout value is used from hdev, which initialized from
debug_fs
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
In this patch if le_create_conn process is started restrict to
disable address resolution and same is disabled during
le_enh_connection_complete
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
When address resolution is enabled and set_privacy is enabled let's
use own address type as 0x03
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
When using controller based address resolution, then the new address
types 0x02 and 0x03 are used. These types need to be converted back into
either public address or random address types.
This patch is specially during LE_CREATE_CONN if using own_add_type as 0x02
or 0x03.
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
When the whitelist is updated, then also update the entries of the
resolving list for devices where IRKs are available.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sathish Narsimman <sathish.narasimman@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
When the LL Privacy support is available, then as part of enabling or
disabling passive background scanning, it is required to set up the
controller based address resolution as well.
Since only passive background scanning is utilizing the whitelist, the
address resolution is now bound to the whitelist and passive background
scanning. All other resolution can be easily done by the host stack.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sathish Narsimman <sathish.narasimman@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
When using controller based address resolution, then the new address
types 0x02 and 0x03 are used. These types need to be converted back into
either public address or random address types.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sathish Narsimman <sathish.narasimman@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Currently, espintcp_rcv drops packets silently, which makes debugging
issues difficult. Count packets as either XfrmInHdrError (when the
packet was too short or contained invalid data) or XfrmInError (for
other issues).
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Currently, short messages (less than 4 bytes after the length header)
will break the stream of messages. This is unnecessary, since we can
still parse messages even if they're too short to contain any usable
data. This is also bogus, as keepalive messages (a single 0xff byte),
though not needed with TCP encapsulation, should be allowed.
This patch changes the stream parser so that short messages are
accepted and dropped in the kernel. Messages that contain a valid SPI
or non-ESP header are processed as before.
Fixes: e27cca96cd ("xfrm: add espintcp (RFC 8229)")
Reported-by: Andrew Cagney <cagney@libreswan.org>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This patch fixes:
commit b9aaec8f0b ("fib: use indirect call wrappers in the most common
fib_rules_ops") which didn't consider the case when
CONFIG_IPV6_MULTIPLE_TABLES is not set.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: b9aaec8f0b ("fib: use indirect call wrappers in the most common fib_rules_ops")
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
the first one in particular has been quite noisy ("broke" in -rc5)
so this would be worth landing even this late even if users likely
won't see a difference
-----BEGIN PGP SIGNATURE-----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=kJqr
-----END PGP SIGNATURE-----
Merge tag '9p-for-5.8-2' of git://github.com/martinetd/linux into master
Pull 9p fixes from Dominique Martinet:
"A couple of syzcaller fixes for 5.8
The first one in particular has been quite noisy ("broke" in -rc5) so
this would be worth landing even this late even if users likely won't
see a difference"
* tag '9p-for-5.8-2' of git://github.com/martinetd/linux:
9p/trans_fd: Fix concurrency del of req_list in p9_fd_cancelled/p9_read_work
net/9p: validate fds in p9_fd_open
Cited commit mistakenly removed the trap group for externally routed
packets (e.g., via the management interface) and grouped locally routed
and externally routed packet traps under the same group, thereby
subjecting them to the same policer.
This can result in problems, for example, when FRR is restarted and
suddenly all transient traffic is trapped to the CPU because of a
default route through the management interface. Locally routed packets
required to re-establish a BGP connection will never reach the CPU and
the routing tables will not be re-populated.
Fix this by using a different trap group for externally routed packets.
Fixes: 8110668ecd ("mlxsw: spectrum_trap: Register layer 3 control traps")
Reported-by: Alex Veber <alexve@mellanox.com>
Tested-by: Alex Veber <alexve@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
fib_trie_unmerge() is called with RTNL held, but not from an RCU
read-side critical section. This leads to the following warning [1] when
the FIB alias list in a leaf is traversed with
hlist_for_each_entry_rcu().
Since the function is always called with RTNL held and since
modification of the list is protected by RTNL, simply use
hlist_for_each_entry() and silence the warning.
[1]
WARNING: suspicious RCU usage
5.8.0-rc4-custom-01520-gc1f937f3f83b #30 Not tainted
-----------------------------
net/ipv4/fib_trie.c:1867 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by ip/164:
#0: ffffffff85a27850 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x49a/0xbd0
stack backtrace:
CPU: 0 PID: 164 Comm: ip Not tainted 5.8.0-rc4-custom-01520-gc1f937f3f83b #30
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014
Call Trace:
dump_stack+0x100/0x184
lockdep_rcu_suspicious+0x153/0x15d
fib_trie_unmerge+0x608/0xdb0
fib_unmerge+0x44/0x360
fib4_rule_configure+0xc8/0xad0
fib_nl_newrule+0x37a/0x1dd0
rtnetlink_rcv_msg+0x4f7/0xbd0
netlink_rcv_skb+0x17a/0x480
rtnetlink_rcv+0x22/0x30
netlink_unicast+0x5ae/0x890
netlink_sendmsg+0x98a/0xf40
____sys_sendmsg+0x879/0xa00
___sys_sendmsg+0x122/0x190
__sys_sendmsg+0x103/0x1d0
__x64_sys_sendmsg+0x7d/0xb0
do_syscall_64+0x54/0xa0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fc80a234e97
Code: Bad RIP value.
RSP: 002b:00007ffef8b66798 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fc80a234e97
RDX: 0000000000000000 RSI: 00007ffef8b66800 RDI: 0000000000000003
RBP: 000000005f141b1c R08: 0000000000000001 R09: 0000000000000000
R10: 00007fc80a2a8ac0 R11: 0000000000000246 R12: 0000000000000001
R13: 0000000000000000 R14: 00007ffef8b67008 R15: 0000556fccb10020
Fixes: 0ddcf43d5d ("ipv4: FIB Local/MAIN table collapse")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
A sequence counter write side critical section must be protected by some
form of locking to serialize writers. If the serialization primitive is
not disabling preemption implicitly, preemption has to be explicitly
disabled before entering the sequence counter write side critical
section.
A plain seqcount_t does not contain the information of which lock must
be held when entering a write side critical section.
Use the new seqcount_spinlock_t and seqcount_mutex_t data types instead,
which allow to associate a lock with the sequence counter. This enables
lockdep to verify that the lock used for writer serialization is held
when the write side critical section is entered.
If lockdep is disabled this lock association is compiled out and has
neither storage size nor runtime overhead.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200720155530.1173732-17-a.darwish@linutronix.de
A sequence counter write side critical section must be protected by some
form of locking to serialize writers. A plain seqcount_t does not
contain the information of which lock must be held when entering a write
side critical section.
Use the new seqcount_rwlock_t data type, which allows to associate a
rwlock with the sequence counter. This enables lockdep to verify that
the rwlock used for writer serialization is held when the write side
critical section is entered.
If lockdep is disabled this lock association is compiled out and has
neither storage size nor runtime overhead.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200720155530.1173732-16-a.darwish@linutronix.de
A sequence counter write side critical section must be protected by some
form of locking to serialize writers. A plain seqcount_t does not
contain the information of which lock must be held when entering a write
side critical section.
Use the new seqcount_spinlock_t data type, which allows to associate a
spinlock with the sequence counter. This enables lockdep to verify that
the spinlock used for writer serialization is held when the write side
critical section is entered.
If lockdep is disabled this lock association is compiled out and has
neither storage size nor runtime overhead.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200720155530.1173732-15-a.darwish@linutronix.de
This avoids another inderect call per RX packet which save us around
20-40 ns.
Changelog:
v1 -> v2:
- Move declaraions to fib_rules.h to remove warnings
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When red_init() fails, red_destroy() is called to clean up.
If the timer is not initialized yet, del_timer_sync() will
complain. So we have to move timer_setup() before any failure.
Reported-and-tested-by: syzbot+6e95a4fabf88dc217145@syzkaller.appspotmail.com
Fixes: aee9caa03f ("net: sched: sch_red: Add qevents "early_drop" and "mark"")
Cc: Petr Machata <petrm@mellanox.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ip6_route_info_create() invokes nexthop_get(), which increases the
refcount of the "nh".
When ip6_route_info_create() returns, local variable "nh" becomes
invalid, so the refcount should be decreased to keep refcount balanced.
The reference counting issue happens in one exception handling path of
ip6_route_info_create(). When nexthops can not be used with source
routing, the function forgets to decrease the refcnt increased by
nexthop_get(), causing a refcnt leak.
Fix this issue by pulling up the error source routing handling when
nexthops can not be used with source routing.
Fixes: f88d8ea67f ("ipv6: Plumb support for nexthop object in a fib6_info")
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MPTCP socket's write_seq member can be read without the msk lock
held, so use WRITE_ONCE() to store it.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MPTCP socket's write_seq member should be read with READ_ONCE() when
the msk lock is not held.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bare TCP ack skbs are freed right after MPTCP sees them, so the work to
allocate, zero, and populate the MPTCP skb extension is wasted. Detect
these skbs and do not add skb extensions to them.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MPTCP state machine handles disconnections on non-fallback connections,
but the mptcp_sock still needs to get notified when fallback subflows
disconnect.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
RFC 8684 appendix D describes the connection state machine for
MPTCP. This patch implements the DATA_FIN / DATA_ACK exchanges and
MPTCP-level socket state changes described in that appendix, rather than
simply sending DATA_FIN along with TCP FIN when disconnecting subflows.
DATA_FIN is now sent and acknowledged before shutting down the
subflows. Received DATA_FIN information (if not part of a data packet)
is written to the MPTCP socket when the incoming DSS option is parsed by
the subflow, and the MPTCP worker is scheduled to process the
flag. DATA_FIN received as part of a full DSS mapping will be handled
when the mapping is processed.
The DATA_FIN is acknowledged by the worker if the reader is caught
up. If there is still data to be moved to the MPTCP-level queue, ack_seq
will be incremented to account for the DATA_FIN when it reaches the end
of the stream and a DATA_ACK will be sent to the peer.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After DATA_FIN has been sent, the peer will acknowledge it. An ack of
the relevant MPTCP-level sequence number will update the MPTCP
connection state appropriately.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This will be used to transition to the appropriate state on close and
determine if a DATA_FIN needs to be sent for that state transition.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Incoming DATA_FIN headers need to propagate the presence of the DATA_FIN
bit and the associated sequence number to the MPTCP layer, even when
arriving on a bare ACK that does not get added to the receive queue. Add
structure members to store the DATA_FIN information and helpers to set
and check those values.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since DATA_FIN information is the same for every subflow, store it only
in the mptcp_sock.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
mptcp_close() acquires the msk lock, so it clearly should not be held
before the function is called.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A MPTCP socket where sending has been shut down should not attempt to
send additional data, since DATA_FIN has already been sent.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
RFC 8684-compliant DATA_FIN needs to be sent and ack'd before subflows
are closed with TCP FIN, so write DATA_FIN DSS headers whenever their
transmission has been enabled by the MPTCP connection-level socket.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make sure not just the pointer itself but the whole range lies in
the user address space. For that pass the length and then use
the access_ok helper to do the check.
Fixes: 6d04fe15f7 ("net: optimize the sockptr_t for unified kernel/user address spaces")
Reported-by: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
sockptr_advance never properly worked. Replace it with _offset variants
of copy_from_sockptr and copy_to_sockptr.
Fixes: ba423fdaa5 ("net: add a new sockptr_t type")
Reported-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reported-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This was accidentally removed in an unrelated commit.
Fixes: c2f12630c6 ("netfilter: switch nf_setsockopt to sockptr_t")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that there's a core tracepoint that reports these events, there's
no need to maintain dprintk() call sites in each arm of the switch
statements.
We also refresh the documenting comments.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Jason tells me that a ULP cannot rely on getting an ESTABLISHED
and DISCONNECTED event pair for each connection, so transport
reference counting in the CM event handler will never be reliable.
Now that we have ib_drain_qp(), svcrdma should no longer need to
hold transport references while Sends and Receives are posted. So
remove the get/put call sites in the CM event handlers.
This eliminates a significant source of locked memory bus traffic.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
During a connection tear down, the Receive queue is flushed before
the device resources are freed. Typically, all the Receives flush
with IB_WR_FLUSH_ERR.
However, any pending successful Receives flush with IB_WR_SUCCESS,
and the server automatically posts a fresh Receive to replace the
completing one. This happens even after the connection has closed
and the RQ is drained. Receives that are posted after the RQ is
drained appear never to complete, causing a Receive resource leak.
The leaked Receive buffer is left DMA-mapped.
To prevent these late-posted recv_ctxt's from leaking, block new
Receive posting after XPT_CLOSE is set.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
xsk_getsockopt() is copying uninitialized stack memory to userspace when
'extra_stats' is 'false'. Fix it. Doing '= {};' is sufficient since currently
'struct xdp_statistics' is defined as follows:
struct xdp_statistics {
__u64 rx_dropped;
__u64 rx_invalid_descs;
__u64 tx_invalid_descs;
__u64 rx_ring_full;
__u64 rx_fill_ring_empty_descs;
__u64 tx_ring_empty_descs;
};
When being copied to the userspace, 'stats' will not contain any uninitialized
'holes' between struct fields.
Fixes: 8aa5a33578 ("xsk: Add new statistics")
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/bpf/20200728053604.404631-1-yepeilin.cs@gmail.com
The original return is NOTIFY_STOP, but notifier_call_chain would stop
the future call for register_pm_notifier even registered on other Kernel
modules with the same priority which value is zero.
Signed-off-by: Max Chou <max.chou@realtek.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
For some reason they tend to squat on the very first CSR/
Cambridge Silicon Radio VID/PID instead of paying fees.
This is an extremely common problem; the issue goes as back as 2013
and these devices are only getting more popular, even rebranded by
reputable vendors and sold by retailers everywhere.
So, at this point in time there are hundreds of modern dongles reusing
the ID of what originally was an early Bluetooth 1.1 controller.
Linux is the only place where they don't work due to spotty checks
in our detection code. It only covered a minimum subset.
So what's the big idea? Take advantage of the fact that all CSR
chips report the same internal version as both the LMP sub-version and
HCI revision number. It always matches, couple that with the manufacturer
code, that rarely lies, and we now have a good idea of who is who.
Additionally, by compiling a list of user-reported HCI/lsusb dumps, and
searching around for legit CSR dongles in similar product ranges we can
find what CSR BlueCore firmware supported which Bluetooth versions.
That way we can narrow down ranges of fakes for each of them.
e.g. Real CSR dongles with LMP subversion 0x73 are old enough that
support BT 1.1 only; so it's a dead giveaway when some
third-party BT 4.0 dongle reuses it.
So, to sum things up; there are multiple classes of fake controllers
reusing the same 0A12:0001 VID/PID. This has been broken for a while.
Known 'fake' bcdDevices: 0x0100, 0x0134, 0x1915, 0x2520, 0x7558, 0x8891
IC markings on 0x7558: FR3191AHAL 749H15143 (???)
https://bugzilla.kernel.org/show_bug.cgi?id=60824
Fixes: 81cac64ba2 (Deal with USB devices that are faking CSR vendor)
Reported-by: Michał Wiśniewski <brylozketrzyn@gmail.com>
Tested-by: Mike Johnson <yuyuyak@gmail.com>
Tested-by: Ricardo Rodrigues <ekatonb@gmail.com>
Tested-by: M.Hanny Sabbagh <mhsabbagh@outlook.com>
Tested-by: Oussama BEN BRAHIM <b.brahim.oussama@gmail.com>
Tested-by: Ismael Ferreras Morezuelas <swyterzone@gmail.com>
Signed-off-by: Ismael Ferreras Morezuelas <swyterzone@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
commit 17175d1a27 ("xfrm: esp6: fix encapsulation header offset
computation") changed esp6_input_done2 to correctly find the size of
the IPv6 header that precedes the TCP/UDP encapsulation header, but
didn't adjust the final call to skb_set_transport_header, which I
assumed was correct in using skb_network_header_len.
Xiumei Mu reported that when we create xfrm states that include port
numbers in the selector, traffic from the user sockets is dropped. It
turns out that we get a state mismatch in __xfrm_policy_check, because
we end up trying to compare the encapsulation header's ports with the
selector that's based on user traffic ports.
Fixes: 0146dca70b ("xfrm: add support for UDPv6 encapsulation of ESP")
Fixes: 26333c37fc ("xfrm: add IPv6 support for espintcp")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
commit 547ce4cfb3 ("switch cmsghdr_from_user_compat_to_kern() to
copy_from_user()") missed one of the places where ucmlen should've been
replaced with cmsg.cmsg_len, now that we are fetching the entire struct
rather than doing it field-by-field.
As the result, compat sendmsg() with several different-sized cmsg
attached started to fail with EINVAL. Trivial to fix, fortunately.
Fixes: 547ce4cfb3 ("switch cmsghdr_from_user_compat_to_kern() to copy_from_user()")
Reported-by: Nick Bowler <nbowler@draconx.ca>
Tested-by: Nick Bowler <nbowler@draconx.ca>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Print PRP specific information from node table as part of debugfs
node table display. Also display the node as DAN-H or DAN-P depending
on the info from node table.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
DAN-P (Dual Attached Nodes PRP) nodes are expected to receive
traditional IP packets as well as PRP (Parallel Redundancy
Protocol) tagged (trailer) packets. PRP trailer is 6 bytes
of PRP protocol unit called RCT, Redundancy Control Trailer
(RCT) similar to HSR tag. PRP network can have traditional
devices such as bridges/switches or PC attached to it and
should be able to communicate. Regular Ethernet devices treat
the RCT as pads. This patch adds logic to format L2 frames
from network stack to add a trailer (RCT) and send it as
duplicates over the slave interfaces when the protocol is
PRP as per IEC 62439-3. At the ingress, it strips the trailer,
do duplicate detection and rejection and forward a stripped
frame up the network stack. PRP device should accept frames
from Singly Attached Nodes (SAN) and thus the driver mark
the link where the frame came from in the node table.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As a preparatory patch to introduce PRP, refactor the code specific to
handling HSR frames into separate functions and call them through
proto_ops function pointers.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for generation of PRP supervision frames. For PRP,
supervision frame format is similar to HSR version 0, but have
a PRP Redundancy Control Trailer (RCT) added and uses a different
message type, PRP_TLV_LIFE_CHECK_DD. Also update
is_supervision_frame() to include the new message type used for
PRP supervision frame.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As a preparatory patch to introduce support for PRP protocol, add a
protocol ops ptr in the private hsr structure to hold function
pointers as some of the functions at protocol level packet
handling is different for HSR vs PRP. It is expected that PRP will
add its of set of functions for protocol handling. Modify existing
hsr_announce() function to call proto_ops->send_sv_frame() to send
supervision frame for HSR. This is expected to be different for PRP.
So introduce a ops function ptr, send_sv_frame() for the same and
initialize it to send_hsr_supervsion_frame(). Modify hsr_announce()
to call proto_ops->send_sv_frame().
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As a preparatory patch to introduce PRP protocol support in the
driver, refactor the skb init code to a separate function.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Parallel Redundancy Protocol (PRP) is another redundancy protocol
introduced by IEC 63439 standard. It is similar to HSR in many
aspects:-
- Use a pair of Ethernet interfaces to created the PRP device
- Use a 6 byte redundancy protocol part (RCT, Redundancy Check
Trailer) similar to HSR Tag.
- Has Link Redundancy Entity (LRE) that works with RCT to implement
redundancy.
Key difference is that the protocol unit is a trailer instead of a
prefix as in HSR. That makes it inter-operable with tradition network
components such as bridges/switches which treat it as pad bytes,
whereas HSR nodes requires some kind of translators (Called redbox) to
talk to regular network devices. This features allows regular linux box
to be converted to a DAN-P box. DAN-P stands for Dual Attached Node - PRP
similar to DAN-H (Dual Attached Node - HSR).
Add a comment at the header/source code to explicitly state that the
driver files also handles PRP protocol as well.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unblocking sockets used for outgoing connections were not containing
inet info about the initial connection due to a typo there: the value of
"err" variable is negative in the kernelspace.
This fixes the creation of additional subflows where the remote port has
to be reused if the other host didn't announce another one. This also
fixes inet_diag showing blank info about MPTCP sockets from unblocking
sockets doing a connect().
Fixes: 41be81a8d3 ("mptcp: fix unblocking connect()")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
MPLS has no dependency with the device type of underlying devices.
Hence the device type check to add mpls support for devices can be
avoided.
Signed-off-by: Martin Varghese <martin.varghese@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cited commit mistakenly copied provided option to 'val' instead of to
'mfc':
```
- if (copy_from_user(&mfc, optval, sizeof(mfc))) {
+ if (copy_from_sockptr(&val, optval, sizeof(val))) {
```
Fix this by copying the option to 'mfc'.
selftest router_multicast.sh before:
$ ./router_multicast.sh
smcroutectl: Unknown or malformed IPC message 'a' from client.
smcroutectl: failed removing multicast route, does not exist.
TEST: mcast IPv4 [FAIL]
Multicast not received on first host
TEST: mcast IPv6 [ OK ]
smcroutectl: Unknown or malformed IPC message 'a' from client.
smcroutectl: failed removing multicast route, does not exist.
TEST: RPF IPv4 [FAIL]
Multicast not received on first host
TEST: RPF IPv6 [ OK ]
selftest router_multicast.sh after:
$ ./router_multicast.sh
TEST: mcast IPv4 [ OK ]
TEST: mcast IPv6 [ OK ]
TEST: RPF IPv4 [ OK ]
TEST: RPF IPv6 [ OK ]
Fixes: 01ccb5b48f ("net/ipv4: switch ip_mroute_setsockopt to sockptr_t")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the maximum dmb buffer limit for an ism device is reached no more
dmb buffers can be registered. When this happens the reason code is set
to SMC_CLC_DECL_MEM indicating out-of-memory. This is the same reason
code that is used when no memory could be allocated for the new dmb
buffer.
This is confusing for users when they see this error but there is more
memory available. To solve this set a separate new reason code when the
maximum dmb limit exceeded.
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that BPF program/link management is centralized in generic net_device
code, kernel code never queries program id from drivers, so
XDP_QUERY_PROG/XDP_QUERY_PROG_HW commands are unnecessary.
This patch removes all the implementations of those commands in kernel, along
the xdp_attachment_query().
This patch was compile-tested on allyesconfig.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200722064603.3350758-10-andriin@fb.com
Add support for LINK_UPDATE command for BPF XDP link to enable reliable
replacement of underlying BPF program.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200722064603.3350758-6-andriin@fb.com
Add bpf_link-based API (bpf_xdp_link) to attach BPF XDP program through
BPF_LINK_CREATE command.
bpf_xdp_link is mutually exclusive with direct BPF program attachment,
previous BPF program should be detached prior to attempting to create a new
bpf_xdp_link attachment (for a given XDP mode). Once BPF link is attached, it
can't be replaced by other BPF program attachment or link attachment. It will
be detached only when the last BPF link FD is closed.
bpf_xdp_link will be auto-detached when net_device is shutdown, similarly to
how other BPF links behave (cgroup, flow_dissector). At that point bpf_link
will become defunct, but won't be destroyed until last FD is closed.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200722064603.3350758-5-andriin@fb.com
Further refactor XDP attachment code. dev_change_xdp_fd() is split into two
parts: getting bpf_progs from FDs and attachment logic, working with
bpf_progs. This makes attachment logic a bit more straightforward and
prepares code for bpf_xdp_link inclusion, which will share the common logic.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200722064603.3350758-4-andriin@fb.com
Instead of delegating to drivers, maintain information about which BPF
programs are attached in which XDP modes (generic/skb, driver, or hardware)
locally in net_device. This effectively obsoletes XDP_QUERY_PROG command.
Such re-organization simplifies existing code already. But it also allows to
further add bpf_link-based XDP attachments without drivers having to know
about any of this at all, which seems like a good setup.
XDP_SETUP_PROG/XDP_SETUP_PROG_HW are just low-level commands to driver to
install/uninstall active BPF program. All the higher-level concerns about
prog/link interaction will be contained within generic driver-agnostic logic.
All the XDP_QUERY_PROG calls to driver in dev_xdp_uninstall() were removed.
It's not clear for me why dev_xdp_uninstall() were passing previous prog_flags
when resetting installed programs. That seems unnecessary, plus most drivers
don't populate prog_flags anyways. Having XDP_SETUP_PROG vs XDP_SETUP_PROG_HW
should be enough of an indicator of what is required of driver to correctly
reset active BPF program. dev_xdp_uninstall() is also generalized as an
iteration over all three supported mode.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200722064603.3350758-3-andriin@fb.com
The bpf iterator for bpf sock local storage map
is implemented. User space interacts with sock
local storage map with fd as a key and storage value.
In kernel, passing fd to the bpf program does not
really make sense. In this case, the sock itself is
passed to bpf program.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200723184116.590602-1-yhs@fb.com
This patch refactored target bpf_iter_init_seq_priv_t callback
function to accept additional information. This will be needed
in later patches for map element targets since a particular
map should be passed to traverse elements for that particular
map. In the future, other information may be passed to target
as well, e.g., pid, cgroup id, etc. to customize the iterator.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200723184110.590156-1-yhs@fb.com
There is no functionality change for this patch.
Struct bpf_iter_reg is used to register a bpf_iter target,
which includes information for both prog_load, link_create
and seq_file creation.
This patch puts fields related seq_file creation into
a different structure. This will be useful for map
elements iterator where one iterator covers different
map types and different map types may have different
seq_ops, init/fini private_data function and
private_data size.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200723184109.590030-1-yhs@fb.com
When BPF socket lookup prog selects a socket that belongs to a reuseport
group, and the reuseport group has connected sockets in it, the socket
selected by reuseport will be discarded, and socket returned by BPF socket
lookup will be used instead.
Modify this behavior so that the socket selected by reuseport running after
BPF socket lookup always gets used. Ignore the fact that the reuseport
group might have connections because it is only relevant when scoring
sockets during regular hashtable-based lookup.
Fixes: 72f7e9440e ("udp: Run SK_LOOKUP BPF program on socket lookup")
Fixes: 6d4201b138 ("udp6: Run SK_LOOKUP BPF program on socket lookup")
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Link: https://lore.kernel.org/bpf/20200722161720.940831-2-jakub@cloudflare.com
The UDP reuseport conflict was a little bit tricky.
The net-next code, via bpf-next, extracted the reuseport handling
into a helper so that the BPF sk lookup code could invoke it.
At the same time, the logic for reuseport handling of unconnected
sockets changed via commit efc6b6f6c3
which changed the logic to carry on the reuseport result into the
rest of the lookup loop if we do not return immediately.
This requires moving the reuseport_has_conns() logic into the callers.
While we are here, get rid of inline directives as they do not belong
in foo.c files.
The other changes were cases of more straightforward overlapping
modifications.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Fix RCU locaking in iwlwifi, from Johannes Berg.
2) mt76 can access uninitialized NAPI struct, from Felix Fietkau.
3) Fix race in updating pause settings in bnxt_en, from Vasundhara
Volam.
4) Propagate error return properly during unbind failures in ax88172a,
from George Kennedy.
5) Fix memleak in adf7242_probe, from Liu Jian.
6) smc_drv_probe() can leak, from Wang Hai.
7) Don't muck with the carrier state if register_netdevice() fails in
the bonding driver, from Taehee Yoo.
8) Fix memleak in dpaa_eth_probe, from Liu Jian.
9) Need to check skb_put_padto() return value in hsr_fill_tag(), from
Murali Karicheri.
10) Don't lose ionic RSS hash settings across FW update, from Shannon
Nelson.
11) Fix clobbered SKB control block in act_ct, from Wen Xu.
12) Missing newlink in "tx_timeout" sysfs output, from Xiongfeng Wang.
13) IS_UDPLITE cleanup a long time ago, incorrectly handled
transformations involving UDPLITE_RECV_CC. From Miaohe Lin.
14) Unbalanced locking in netdevsim, from Taehee Yoo.
15) Suppress false-positive error messages in qed driver, from Alexander
Lobakin.
16) Out of bounds read in ax25_connect and ax25_sendmsg, from Peilin Ye.
17) Missing SKB release in cxgb4's uld_send(), from Navid Emamdoost.
18) Uninitialized value in geneve_changelink(), from Cong Wang.
19) Fix deadlock in xen-netfront, from Andera Righi.
19) flush_backlog() frees skbs with IRQs disabled, so should use
dev_kfree_skb_irq() instead of kfree_skb(). From Subash Abhinov
Kasiviswanathan.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (111 commits)
drivers/net/wan: lapb: Corrected the usage of skb_cow
dev: Defer free of skbs in flush_backlog
qrtr: orphan socket in qrtr_release()
xen-netfront: fix potential deadlock in xennet_remove()
flow_offload: Move rhashtable inclusion to the source file
geneve: fix an uninitialized value in geneve_changelink()
bonding: check return value of register_netdevice() in bond_newlink()
tcp: allow at most one TLP probe per flight
AX.25: Prevent integer overflows in connect and sendmsg
cxgb4: add missing release on skb in uld_send()
net: atlantic: fix PTP on AQC10X
AX.25: Prevent out-of-bounds read in ax25_sendmsg()
sctp: shrink stream outq when fails to do addstream reconf
sctp: shrink stream outq only when new outcnt < old outcnt
AX.25: Fix out-of-bounds read in ax25_connect()
enetc: Remove the mdio bus on PF probe bailout
net: ethernet: ti: add NETIF_F_HW_TC hw feature flag for taprio offload
net: ethernet: ave: Fix error returns in ave_init
drivers/net/wan/x25_asy: Fix to make it work
ipvs: fix the connection sync failed in some cases
...
IRQs are disabled when freeing skbs in input queue.
Use the IRQ safe variant to free skbs here.
Fixes: 145dd5f9c8 ("net: flush the softnet backlog in process context")
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We have to detach sock from socket in qrtr_release(),
otherwise skb->sk may still reference to this socket
when the skb is released in tun->queue, particularly
sk->sk_wq still points to &sock->wq, which leads to
a UAF.
Reported-and-tested-by: syzbot+6720d64f31c081c2f708@syzkaller.appspotmail.com
Fixes: 28fb4e59a4 ("net: qrtr: Expose tunneling endpoint to user space")
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp_session_free called BUG_ON if the tunnel magic feather value wasn't
correct. The intent of this was to catch lifetime bugs; for example
early tunnel free due to incorrect use of reference counts.
Since the tunnel magic feather being wrong indicates either early free
or structure corruption, we can avoid doing more damage by simply
leaving the tunnel structure alone. If the tunnel refcount isn't
dropped when it should be, the tunnel instance will remain in the
kernel, resulting in the tunnel structure and socket leaking.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp_session_free is only called by l2tp_session_dec_refcount when the
reference count reaches zero, so it's of limited value to validate the
reference count value in l2tp_session_free itself.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp_session_queue_purge is used during session shutdown to drop any
skbs queued for reordering purposes according to L2TP dataplane rules.
The BUG_ON in this function checks the session magic feather in an
attempt to catch lifetime bugs.
Rather than crashing the kernel with a BUG_ON, we can simply WARN_ON and
refuse to do anything more -- in the worst case this could result in a
leak. However this is highly unlikely given that the session purge only
occurs from codepaths which have obtained the session by means of a lookup
via. the parent tunnel and which check the session "dead" flag to
protect against shutdown races.
While we're here, have l2tp_session_queue_purge return void rather than
an integer, since neither of the callsites checked the return value.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
checkpatch advises that WARN_ON and recovery code are preferred over
BUG_ON which crashes the kernel.
l2tp_ppp has a BUG_ON check of struct seq_file's private pointer in
pppol2tp_seq_start prior to accessing data through that pointer.
Rather than crashing, we can simply bail out early and return NULL in
order to terminate the seq file processing in much the same way as we do
when reaching the end of tunnel/session instances to render.
Retain a WARN_ON to help trace possible bugs in this area.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
checkpatch advises that WARN_ON and recovery code are preferred over
BUG_ON which crashes the kernel.
l2tp_ppp.c's BUG_ON checks of the l2tp session structure's "magic" field
occur in code paths where it's reasonably easy to recover:
* In the case of pppol2tp_sock_to_session, we can return NULL and the
caller will bail out appropriately. There is no change required to
any of the callsites of this function since they already handle
pppol2tp_sock_to_session returning NULL.
* In the case of pppol2tp_session_destruct we can just avoid
decrementing the reference count on the suspect session structure.
In the worst case scenario this results in a memory leak, which is
preferable to a crash.
Convert these uses of BUG_ON to WARN_ON accordingly.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp_tunnel_closeall is only called from l2tp_core.c, and it's easy
to statically analyse the code path calling it to validate that it
should never be passed a NULL tunnel pointer.
Having a BUG_ON checking the tunnel pointer triggers a checkpatch
warning. Since the BUG_ON is of no value, remove it to avoid the
warning.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp_session_queue_purge is only called from l2tp_core.c, and it's easy
to statically analyse the code paths calling it to validate that it
should never be passed a NULL session pointer.
Having a BUG_ON checking the session pointer triggers a checkpatch
warning. Since the BUG_ON is of no value, remove it to avoid the
warning.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp_dfs_seq_start had a BUG_ON to catch a possible programming error in
l2tp_dfs_seq_open.
Since we can easily bail out of l2tp_dfs_seq_start, prefer to do that
and flag the error with a WARN_ON rather than crashing the kernel.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
checkpatch warns about multiple assignments.
Update l2tp accordingly.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend the rfc 4884 read interface introduced for ipv4 in
commit eba75c587e ("icmp: support rfc 4884") to ipv6.
Add socket option SOL_IPV6/IPV6_RECVERR_RFC4884.
Changes v1->v2:
- make ipv6_icmp_error_rfc4884 static (file scope)
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The RFC 4884 spec is largely the same between IPv4 and IPv6.
Factor out the IPv4 specific parts in preparation for IPv6 support:
- icmp types supported
- icmp header size, and thus offset to original datagram start
- datagram length field offset in icmp(6)hdr.
- datagram length field word size: 4B for IPv4, 8B for IPv6.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
1) Only accept packets with original datagram len field >= header len.
The extension header must start after the original datagram headers.
The embedded datagram len field is compared against the 128B minimum
stipulated by RFC 4884. It is unlikely that headers extend beyond
this. But as we know the exact header length, check explicitly.
2) Remove the check that datagram length must be <= 576B.
This is a send constraint. There is no value in testing this on rx.
Within private networks it may be known safe to send larger packets.
Process these packets.
This test was also too lax. It compared original datagram length
rather than entire icmp packet length. The stand-alone fix would be:
- if (hlen + skb->len > 576)
+ if (-skb_network_offset(skb) + skb->len > 576)
Fixes: eba75c587e ("icmp: support rfc 4884")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The variable status is being initialized with a value that is never read
and it is being updated later with a new value. The initialization is
redundant and can be removed. Also put the variable declarations into
reverse christmas tree order.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The previous patch introduced a deadlock, this patch fixes it by making
sure the work is canceled without holding the global ovs lock. This is
done by moving the reorder processing one layer up to the netns level.
Fixes: eac87c413b ("net: openvswitch: reorder masks array based on usage")
Reported-by: syzbot+2c4ff3614695f75ce26c@syzkaller.appspotmail.com
Reported-by: syzbot+bad6507e5db05017b008@syzkaller.appspotmail.com
Reviewed-by: Paolo <pabeni@redhat.com>
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This sockopt accepts two kinds of parameters, using struct
sctp_sack_info and struct sctp_assoc_value. The mentioned commit didn't
notice an implicit cast from the smaller (latter) struct to the bigger
one (former) when copying the data from the user space, which now leads
to an attempt to write beyond the buffer (because it assumes the storing
buffer is bigger than the parameter itself).
Fix it by allocating a sctp_sack_info on stack and filling it out based
on the small struct for the compat case.
Changelog stole from an earlier patch from Marcelo Ricardo Leitner.
Fixes: ebb25defdc ("sctp: pass a kernel pointer to sctp_setsockopt_delayed_ack")
Reported-by: syzbot+0e4699d000d8b874d8dc@syzkaller.appspotmail.com
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For architectures like x86 and arm64 we don't need the separate bit to
indicate that a pointer is a kernel pointer as the address spaces are
unified. That way the sockptr_t can be reduced to a union of two
pointers, which leads to nicer calling conventions.
The only caveat is that we need to check that users don't pass in kernel
address and thus gain access to kernel memory. Thus the USER_SOCKPTR
helper is replaced with a init_user_sockptr function that does this check
and returns an error if it fails.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rework the remaining setsockopt code to pass a sockptr_t instead of a
plain user pointer. This removes the last remaining set_fs(KERNEL_DS)
outside of architecture specific code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> [ieee802154]
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass a sockptr_t to prepare for set_fs-less handling of the kernel
pointer from bpf-cgroup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass a sockptr_t to prepare for set_fs-less handling of the kernel
pointer from bpf-cgroup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass a sockptr_t to prepare for set_fs-less handling of the kernel
pointer from bpf-cgroup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass a sockptr_t to prepare for set_fs-less handling of the kernel
pointer from bpf-cgroup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Factour out a helper to set the IPv6 option headers from
do_ipv6_setsockopt.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass a sockptr_t to prepare for set_fs-less handling of the kernel
pointer from bpf-cgroup.
Note that the get case is pretty weird in that it actually copies data
back to userspace from setsockopt.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Split ipv6_flowlabel_opt into a subfunction for each action and a small
wrapper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass a sockptr_t to prepare for set_fs-less handling of the kernel
pointer from bpf-cgroup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass a sockptr_t to prepare for set_fs-less handling of the kernel
pointer from bpf-cgroup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass a sockptr_t to prepare for set_fs-less handling of the kernel
pointer from bpf-cgroup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is mostly to prepare for cleaning up the callers, as bpfilter by
design can't handle kernel pointers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass a sockptr_t to prepare for set_fs-less handling of the kernel
pointer from bpf-cgroup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass a sockptr_t to prepare for set_fs-less handling of the kernel
pointer from bpf-cgroup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass a sockptr_t to prepare for set_fs-less handling of the kernel
pointer from bpf-cgroup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass a sockptr_t to prepare for set_fs-less handling of the kernel
pointer from bpf-cgroup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass a sockptr_t to prepare for set_fs-less handling of the kernel
pointer from bpf-cgroup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass a sockptr_t to prepare for set_fs-less handling of the kernel
pointer from bpf-cgroup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass a sockptr_t to prepare for set_fs-less handling of the kernel
pointer from bpf-cgroup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The bpfilter user mode helper processes the optval address using
process_vm_readv. Don't send it kernel addresses fed under
set_fs(KERNEL_DS) as that won't work.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Split __bpfilter_process_sockopt into a low-level send request routine and
the actual setsockopt hook to split the init time ping from the actual
setsockopt processing.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The __user doesn't make sense when casting to an integer type, just
switch to a uintptr_t cast which also removes the need for the __force.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adding new cls flower keys for hash value and hash
mask and dissect the hash info from the skb into
the flow key towards flow classication.
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Retreive a hash value from the SKB and store it
in the dissector key for future matching.
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I noticed that touching linux/rhashtable.h causes lib/vsprintf.c to
be rebuilt. This dependency came through a bogus inclusion in the
file net/flow_offload.h. This patch moves it to the right place.
This patch also removes a lingering rhashtable inclusion in cls_api
created by the same commit.
Fixes: 4e481908c5 ("flow_offload: move tc indirect block to...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Braino when converting "buf->len -=" to "buf->len = len -".
The result is under-estimation of the ralign and rslack values. On
krb5p mounts, this has caused READDIR to fail with EIO, and KASAN
splats when decoding READLINK replies.
As a result of fixing this oversight, the gss_unwrap method now
returns a buf->len that can be shorter than priv_len for small
RPC messages. The additional adjustment done in unwrap_priv_data()
can underflow buf->len. This causes the nfsd_request_too_large
check to fail during some NFSv3 operations.
Reported-by: Marian Rainer-Harbach
Reported-by: Pierre Sauter <pierre.sauter@stwm.de>
BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1886277
Fixes: 31c9590ae4 ("SUNRPC: Add "@len" parameter to gss_unwrap()")
Reviewed-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contains Netfilter/IPVS fixes for net:
1) Fix NAT hook deletion when table is dormant, from Florian Westphal.
2) Fix IPVS sync stalls, from guodeqing.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The purpose of this override is to give the user an indication of what
the number of the CPU port is (in DSA, the CPU port is a hardware
implementation detail and not a network interface capable of traffic).
However, it has always failed (by design) at providing this information
to the user in a reliable fashion.
Prior to commit 3369afba1e ("net: Call into DSA netdevice_ops
wrappers"), the behavior was to only override this callback if it was
not provided by the DSA master.
That was its first failure: if the DSA master itself was a DSA port or a
switchdev, then the user would not see the number of the CPU port in
/sys/class/net/eth0/phys_port_name, but the number of the DSA master
port within its respective physical switch.
But that was actually ok in a way. The commit mentioned above changed
that behavior, and now overrides the master's ndo_get_phys_port_name
unconditionally. That comes with problems of its own, which are worse in
a way.
The idea is that it's typical for switchdev users to have udev rules for
consistent interface naming. These are based, among other things, on
the phys_port_name attribute. If we let the DSA switch at the bottom
to start randomly overriding ndo_get_phys_port_name with its own CPU
port, we basically lose any predictability in interface naming, or even
uniqueness, for that matter.
So, there are reasons to let DSA override the master's callback (to
provide a consistent interface, a number which has a clear meaning and
must not be interpreted according to context), and there are reasons to
not let DSA override it (it breaks udev matching for the DSA master).
But, there is an alternative method for users to retrieve the number of
the CPU port of each DSA switch in the system:
$ devlink port
pci/0000:00:00.5/0: type eth netdev swp0 flavour physical port 0
pci/0000:00:00.5/2: type eth netdev swp2 flavour physical port 2
pci/0000:00:00.5/4: type notset flavour cpu port 4
spi/spi2.0/0: type eth netdev sw0p0 flavour physical port 0
spi/spi2.0/1: type eth netdev sw0p1 flavour physical port 1
spi/spi2.0/2: type eth netdev sw0p2 flavour physical port 2
spi/spi2.0/4: type notset flavour cpu port 4
spi/spi2.1/0: type eth netdev sw1p0 flavour physical port 0
spi/spi2.1/1: type eth netdev sw1p1 flavour physical port 1
spi/spi2.1/2: type eth netdev sw1p2 flavour physical port 2
spi/spi2.1/3: type eth netdev sw1p3 flavour physical port 3
spi/spi2.1/4: type notset flavour cpu port 4
So remove this duplicated, unreliable and troublesome method. From this
patch on, the phys_port_name attribute of the DSA master will only
contain information about itself (if at all). If the users need reliable
information about the CPU port they're probably using devlink anyway.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously TLP may send multiple probes of new data in one
flight. This happens when the sender is cwnd limited. After the
initial TLP containing new data is sent, the sender receives another
ACK that acks partial inflight. It may re-arm another TLP timer
to send more, if no further ACK returns before the next TLP timeout
(PTO) expires. The sender may send in theory a large amount of TLP
until send queue is depleted. This only happens if the sender sees
such irregular uncommon ACK pattern. But it is generally undesirable
behavior during congestion especially.
The original TLP design restrict only one TLP probe per inflight as
published in "Reducing Web Latency: the Virtue of Gentle Aggression",
SIGCOMM 2013. This patch changes TLP to send at most one probe
per inflight.
Note that if the sender is app-limited, TLP retransmits old data
and did not have this issue.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We recently added some bounds checking in ax25_connect() and
ax25_sendmsg() and we so we removed the AX25_MAX_DIGIS checks because
they were no longer required.
Unfortunately, I believe they are required to prevent integer overflows
so I have added them back.
Fixes: 8885bb0621 ("AX.25: Prevent out-of-bounds read in ax25_sendmsg()")
Fixes: 2f2a7ffad5 ("AX.25: Fix out-of-bounds read in ax25_connect()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Passing "sizeof(struct blah)" in kzalloc calls is less readable,
potentially prone to future bugs if the type of the pointer is changed,
and triggers checkpatch warnings.
Tweak the kzalloc calls in l2tp which use this form to avoid the
warning.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When creating an L2TP tunnel using the netlink API, userspace must
either pass a socket FD for the tunnel to use (for managed tunnels),
or specify the tunnel source/destination address (for unmanaged
tunnels).
Since source/destination addresses may be AF_INET or AF_INET6, the l2tp
netlink code has conditionally compiled blocks to support IPv6.
Rather than embedding these directly into l2tp_nl_cmd_tunnel_create
(where it makes the code difficult to read and confuses checkpatch to
boot) split the handling of address-related attributes into a separate
function.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp_nl_tunnel_send has conditionally compiled code to support AF_INET6,
which makes the code difficult to follow and triggers checkpatch
warnings.
Split the code out into functions to handle the AF_INET v.s. AF_INET6
cases, which both improves readability and resolves the checkpatch
warnings.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
checkpatch warns about indentation and brace balancing around the
conditionally compiled code for AF_INET6 support in
l2tp_dfs_seq_tunnel_show.
By adding another check on the socket address type we can make the code
more readable while removing the checkpatch warning.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These checks are all simple and don't benefit from extra braces to
clarify intent. Remove them for easier-reading code.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
checkpatch warns about comparisons to NULL, e.g.
CHECK: Comparison to NULL could be written "!rt"
#474: FILE: net/l2tp/l2tp_ip.c:474:
+ if (rt == NULL) {
These sort of comparisons are generally clearer and more readable
the way checkpatch suggests, so update l2tp accordingly.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use eth_zero_addr() to clear mac address insetad of memset().
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
So that we can easily perform some basic PM-related
adimission checks before creating the child socket.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tcp_send_active_reset() is more prone to transient errors
(memory allocation or xmit queue full): in stress conditions
the kernel may drop the egress packet, and the client will be
stuck.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When syncookie are in use, the TCP stack may feed into
subflow_syn_recv_sock() plain TCP request sockets. We can't
access mptcp_subflow_request_sock-specific fields on such
sockets. Explicitly check the rsk ops to do safe accesses.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mentioned function has several unneeded branches,
handle each case - MP_CAPABLE, MP_JOIN, fallback -
under a single conditional and drop quite a bit of
duplicate code.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently accepted msk sockets become established only after
accept() returns the new sk to user-space.
As MP_JOIN request are refused as per RFC spec on non fully
established socket, the above causes mp_join self-tests
instabilities.
This change lets the msk entering the established status
as soon as it receives the 3rd ack and propagates the first
subflow fully established status on the msk socket.
Finally we can change the subflow acceptance condition to
take in account both the sock state and the msk fully
established flag.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the unlikely event of a failure at connect time,
we currently clear the request_mptcp flag - so that
the MPC handshake is not started at all, but the msk
is not explicitly marked as fallback.
This would lead to later insertion of wrong DSS options
in the xmitted packets, in violation of RFC specs and
possibly fooling the peer.
Fixes: e1ff9e82e2 ("net: mptcp: improve fallback to TCP")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When updating a partially acked data fragment, we
actually corrupt it. This is irrelevant till we send
data on a single subflow, as retransmitted data, if
any are discarded by the peer as duplicate, but it
will cause data corruption as soon as we will start
creating non backup subflows.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently we do not init the subflow write sequence for
MP_JOIN subflows. This will cause bad mapping being
generated as soon as we will use non backup subflow.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
checkpatch warned about the L2TP_SKB_CB macro's use of its argument: add
braces to avoid the problem.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In l2tp_core.c both l2tp_tunnel_create and l2tp_session_create take
quite a number of arguments and have a correspondingly long prototype.
This is both quite difficult to scan visually, and triggers checkpatch
warnings.
Add a line break to make these function prototypes more readable.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
checkpatch warns about use of seq_printf where seq_puts would do.
Modify l2tp_debugfs accordingly.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use BIT(x) rather than (1<<x), reported by checkpatch.pl.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reported by checkpatch:
"WARNING: function definition argument 'struct sock *'
should also have an identifier name"
Add an identifier name to help document the prototype.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp_core has conditionally compiled code in l2tp_xmit_skb for IPv6
support. The structure of this code triggered a checkpatch warning
due to incorrect indentation.
Fix up the indentation to address the checkpatch warning.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arguments should be aligned with the function call open parenthesis as
per checkpatch. Tweak some function calls which were not aligned
correctly.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some l2tp code had line breaks which made the code more difficult to
read. These were originally motivated by the 80-character line width
coding guidelines, but were actually a negative from the perspective of
trying to follow the code.
Remove these linebreaks for clearer code, even if we do exceed 80
characters in width in some places.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Modify some l2tp comments to better adhere to kernel coding style, as
reported by checkpatch.pl.
Add descriptive comments for the l2tp per-net spinlocks to document
their use.
Fix an incorrect comment in l2tp_recv_common:
RFC2661 section 5.4 states that:
"The LNS controls enabling and disabling of sequence numbers by sending a
data message with or without sequence numbers present at any time during
the life of a session."
l2tp handles this correctly in l2tp_recv_common, but the comment around
the code was incorrect and confusing. Fix up the comment accordingly.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix up various whitespace issues as reported by checkpatch.pl:
* remove spaces around operators where appropriate,
* add missing blank lines following declarations,
* remove multiple blank lines, or trailing blank lines at the end of
functions.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Checks on `addr_len` and `usax->sax25_ndigis` are insufficient.
ax25_sendmsg() can go out of bounds when `usax->sax25_ndigis` equals to 7
or 8. Fix it.
It is safe to remove `usax->sax25_ndigis > AX25_MAX_DIGIS`, since
`addr_len` is guaranteed to be less than or equal to
`sizeof(struct full_sockaddr_ax25)`
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently devlink instance is searched on all doit() operations.
But it is optionally stored into user_ptr[0]. This requires
rediscovering devlink again doing post_doit().
Few devlink commands related to port shared buffers needs 3 pointers
(devlink, devlink_port, and devlink_sb) while executing doit commands.
Though devlink pointer can be derived from the devlink_port during
post_doit() operation when doit() callback has acquired devlink
instance lock, relying on such scheme to access devlik pointer makes
code very fragile.
Hence, to avoid ambiguity in post_doit() and to avoid searching
devlink instance again, simplify code by always storing devlink
instance in user_ptr[0] and derive devlink_sb pointer in their
respective callback routines.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When adding a stream with stream reconf, the new stream firstly is in
CLOSED state but new out chunks can still be enqueued. Then once gets
the confirmation from the peer, the state will change to OPEN.
However, if the peer denies, it needs to roll back the stream. But when
doing that, it only sets the stream outcnt back, and the chunks already
in the new stream don't get purged. It caused these chunks can still be
dequeued in sctp_outq_dequeue_data().
As its stream is still in CLOSE, the chunk will be enqueued to the head
again by sctp_outq_head_data(). This chunk will never be sent out, and
the chunks after it can never be dequeued. The assoc will be 'hung' in
a dead loop of sending this chunk.
To fix it, this patch is to purge these chunks already in the new
stream by calling sctp_stream_shrink_out() when failing to do the
addstream reconf.
Fixes: 11ae76e67a ("sctp: implement receiver-side procedures for the Reconf Response Parameter")
Reported-by: Ying Xu <yinxu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It's not necessary to go list_for_each for outq->out_chunk_list
when new outcnt >= old outcnt, as no chunk with higher sid than
new (outcnt - 1) exists in the outqueue.
While at it, also move the list_for_each code in a new function
sctp_stream_shrink_out(), which will be used in the next patch.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Otherwise the 'chain_len' filed will carry random values,
some token creation calls will fail due to excessive chain
length, causing unexpected fallback to TCP.
Fixes: 2c5ebd001d ("mptcp: refactor token container")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Checks on `addr_len` and `fsa->fsa_ax25.sax25_ndigis` are insufficient.
ax25_connect() can go out of bounds when `fsa->fsa_ax25.sax25_ndigis`
equals to 7 or 8. Fix it.
This issue has been reported as a KMSAN uninit-value bug, because in such
a case, ax25_connect() reaches into the uninitialized portion of the
`struct sockaddr_storage` statically allocated in __sys_connect().
It is safe to remove `fsa->fsa_ax25.sax25_ndigis > AX25_MAX_DIGIS` because
`addr_len` is guaranteed to be less than or equal to
`sizeof(struct full_sockaddr_ax25)`.
Reported-by: syzbot+c82752228ed975b0a623@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=55ef9d629f3b3d7d70b69558015b63b48d01af66
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds support for the SIOCOUTQ IOCTL to get the send buffer fill
of a DCCP socket, like UDP and TCP sockets already have.
Regarding the used data field: DCCP uses per packet sequence numbers,
not per byte, so sequence numbers can't be used like in TCP. sk_wmem_queued
is not used by DCCP and always 0, even in test on highly congested paths.
Therefore this uses sk_wmem_alloc like in UDP.
Signed-off-by: Richard Sailer <richard_siegfried@systemli.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Due to unified Ethernet Switch Device Tree Bindings allow for ethernet-ports as
encapsulating node as well.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The buildbot found a config where the header isn't already implicitly
pulled in, so add an explicit include as well.
Fixes: 8c918ffbba ("net: remove compat_sock_common_{get,set}sockopt")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-07-21
The following pull-request contains BPF updates for your *net-next* tree.
We've added 46 non-merge commits during the last 6 day(s) which contain
a total of 68 files changed, 4929 insertions(+), 526 deletions(-).
The main changes are:
1) Run BPF program on socket lookup, from Jakub.
2) Introduce cpumap, from Lorenzo.
3) s390 JIT fixes, from Ilya.
4) teach riscv JIT to emit compressed insns, from Luke.
5) use build time computed BTF ids in bpf iter, from Yonghong.
====================
Purely independent overlapping changes in both filter.h and xdp.h
Signed-off-by: David S. Miller <davem@davemloft.net>
In pfkey_dump() dplen and splen can both be specified to access the
xfrm_address_t structure out of bounds in__xfrm_state_filter_match()
when it calls addr_match() with the indexes. Return EINVAL if either
are out of range.
Signed-off-by: Mark Salyzyn <salyzyn@android.com>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: kernel-team@android.com
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The sync_thread_backup only checks sk_receive_queue is empty or not,
there is a situation which cannot sync the connection entries when
sk_receive_queue is empty and sk_rmem_alloc is larger than sk_rcvbuf,
the sync packets are dropped in __udp_enqueue_schedule_skb, this is
because the packets in reader_queue is not read, so the rmem is
not reclaimed.
Here I add the check of whether the reader_queue of the udp sock is
empty or not to solve this problem.
Fixes: 2276f58ac5 ("udp: use a separate rx queue for packet reception")
Reported-by: zhouxudong <zhouxudong8@huawei.com>
Signed-off-by: guodeqing <geffrey.guo@huawei.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When expire_nodest_conn=1 and a destination is deleted, IPVS does not
expire the existing connections until the next matching incoming packet.
If there are many connection entries from a single client to a single
destination, many packets may get dropped before all the connections are
expired (more likely with lots of UDP traffic). An optimization can be
made where upon deletion of a destination, IPVS queues up delayed work
to immediately expire any connections with a deleted destination. This
ensures any reused source ports from a client (within the IPVS timeouts)
are scheduled to new real servers instead of silently dropped.
Signed-off-by: Andrew Sy Kim <kim.andrewsy@gmail.com>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Constify devlink instance pointer while checking if reload operation is
supported or not.
This helps to review the scope of checks done in reload.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reload operation is enabled or not is already checked by
devlink_reload(). Hence, remove the duplicate check from
devlink_nl_cmd_reload().
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is no need to hold a device global lock when initializing
devlink device fields of a devlink instance which is not yet part of the
devices list.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can't use IS_UDPLITE to replace udp_sk->pcflag when UDPLITE_RECV_CC is
checked.
Fixes: b2bf1e2659 ("[UDP]: Clean up for IS_UDPLITE macro")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When I cat 'tx_timeout' by sysfs, it displays as follows. It's better to
add a newline for easy reading.
root@syzkaller:~# cat /sys/devices/virtual/net/lo/queues/tx-0/tx_timeout
0root@syzkaller:~#
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, SO_REUSEPORT does not work well if connected sockets are in a
UDP reuseport group.
Then reuseport_has_conns() returns true and the result of
reuseport_select_sock() is discarded. Also, unconnected sockets have the
same score, hence only does the first unconnected socket in udp_hslot
always receive all packets sent to unconnected sockets.
So, the result of reuseport_select_sock() should be used for load
balancing.
The noteworthy point is that the unconnected sockets placed after
connected sockets in sock_reuseport.socks will receive more packets than
others because of the algorithm in reuseport_select_sock().
index | connected | reciprocal_scale | result
---------------------------------------------
0 | no | 20% | 40%
1 | no | 20% | 20%
2 | yes | 20% | 0%
3 | no | 20% | 40%
4 | yes | 20% | 0%
If most of the sockets are connected, this can be a problem, but it still
works better than now.
Fixes: acdcecc612 ("udp: correct reuseport selection with connected sockets")
CC: Willem de Bruijn <willemb@google.com>
Reviewed-by: Benjamin Herrenschmidt <benh@amazon.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If an unconnected socket in a UDP reuseport group connect()s, has_conns is
set to 1. Then, when a packet is received, udp[46]_lib_lookup2() scans all
sockets in udp_hslot looking for the connected socket with the highest
score.
However, when the number of sockets bound to the port exceeds max_socks,
reuseport_grow() resets has_conns to 0. It can cause udp[46]_lib_lookup2()
to return without scanning all sockets, resulting in that packets sent to
connected sockets may be distributed to unconnected sockets.
Therefore, reuseport_grow() should copy has_conns.
Fixes: acdcecc612 ("udp: correct reuseport selection with connected sockets")
CC: Willem de Bruijn <willemb@google.com>
Reviewed-by: Benjamin Herrenschmidt <benh@amazon.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
One additional field btf_id is added to struct
bpf_ctx_arg_aux to store the precomputed btf_ids.
The btf_id is computed at build time with
BTF_ID_LIST or BTF_ID_LIST_GLOBAL macro definitions.
All existing bpf iterators are changed to used
pre-compute btf_ids.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200720163403.1393551-1-yhs@fb.com
tcp and udp bpf_iter can reuse some socket ids in
btf_sock_ids, so make it global.
I put the extern definition in btf_ids.h as a central
place so it can be easily discovered by developers.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200720163402.1393427-1-yhs@fb.com
Currently, socket types (struct tcp_sock, udp_sock, etc.)
used by bpf_skc_to_*() helpers are computed when vmlinux_btf
is first built in the kernel.
Commit 5a2798ab32
("bpf: Add BTF_ID_LIST/BTF_ID/BTF_ID_UNUSED macros")
implemented a mechanism to compute btf_ids at kernel build
time which can simplify kernel implementation and reduce
runtime overhead by removing in-kernel btf_id calculation.
This patch did exactly this, removing in-kernel btf_id
computation and utilizing build-time btf_id computation.
If CONFIG_DEBUG_INFO_BTF is not defined, BTF_ID_LIST will
define an array with size of 5, which is not enough for
btf_sock_ids. So define its own static array if
CONFIG_DEBUG_INFO_BTF is not defined.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200720163358.1393023-1-yhs@fb.com
The generic netlink is initialized far after the netlink protocol
itself at subsys_initcall. The devlink is initialized at the same
level, but after, as shown by a disassembly of the vmlinux:
[ ... ]
374 ffff8000115f22c0 <__initcall_devlink_init4>:
375 ffff8000115f22c4 <__initcall_genl_init4>:
[ ... ]
The function devlink_init() calls genl_register_family() before the
generic netlink subsystem is initialized.
As the generic netlink initcall level is set since 2005, it seems that
was not a problem, but now we have the thermal framework initialized
at the core_initcall level which creates the generic netlink family
and sends a notification which leads to a subtle memory corruption
only detectable when the CONFIG_INIT_ON_ALLOC_DEFAULT_ON option is set
with the earlycon at init time.
The thermal framework needs to be initialized early in order to begin
the mitigation as soon as possible. Moving it to postcore_initcall is
acceptable.
This patch changes the initialization level for the generic netlink
family to the core_initcall and comes after the netlink protocol
initialization.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: David S. Miller <davem@davemloft.net>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Link: https://lore.kernel.org/r/20200715074120.8768-1-daniel.lezcano@linaro.org
We forgot to support the xfrm policy hold queue when
VTI was implemented. This patch adds everything we
need so that we can use the policy hold queue together
with VTI interfaces.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Commit 02288248b0 ("tipc: eliminate gap indicator from ACK messages")
eliminated sending of the 'gap' indicator in regular ACK messages and
only allowed to build NACK message with enabled probe/probe_reply.
However, necessary correction for building NACK message was missed
in tipc_link_timeout() function. This leads to significant delay and
link reset (due to retransmission failure) in lossy environment.
This commit fixes it by setting the 'probe' flag to 'true' when
the receive deferred queue is not empty. As a result, NACK message
will be built to send back to another peer.
Fixes: 02288248b0 ("tipc: eliminate gap indicator from ACK messages")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
The fragment packets do defrag in tcf_ct_handle_fragments
will clear the skb->cb which make the qdisc_skb_cb clear
too. So the qdsic_skb_cb should be store before defrag and
restore after that.
It also update the pkt_len after all the
fragments finish the defrag to one packet and make the
following actions counter correct.
Fixes: b57dc7c13e ("net/sched: Introduce action ct")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that DSA supports MTU configuration, undo the effects of commit
8b1efc0f83 ("net: remove MTU limits on a few ether_setup callers") and
let DSA interfaces use the default min_mtu and max_mtu specified by
ether_setup(). This is more important for min_mtu: since DSA is
Ethernet, the minimum MTU is the same as of any other Ethernet
interface, and definitely not zero. For the max_mtu, we have a callback
through which drivers can override that, if they want to.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Because kfree_skb already checked NULL skb parameter,
so the additional checks are unnecessary, just remove them.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
skb_put_padto() can fail. So check for return type and return NULL
for skb. Caller checks for skb and acts correctly if it is NULL.
Fixes: 6d6148bc78 ("net: hsr: fix incorrect lsdu size in the tag of HSR frames for small frames")
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a current limit of 1920 registered dmb buffers per ISM device
for smc-d. One link group can contain 255 connections, each connection
is using one dmb buffer. When the connection is closed then the
registered buffer is held in a queue and is reused by the next
connection. When a link group is 'full' then another link group is
created and uses an own buffer pool. The link groups are added to a
list using list_add() which puts a new link group to the first position
in the list.
In the situation that many connections are opened (>1920) and a few of
them stay open while others are closed quickly we end up with at least 8
link groups. For a new connection a matching link group is looked up,
iterating over the list of link groups. The trailing 7 link groups
all have registered dmb buffers which could be reused, while the first
link group has only a few dmb buffers and then hit the 1920 limit.
Because the first link group is not full (255 connection limit not
reached) it is chosen and finally the connection falls back to TCP
because there is no dmb buffer available in this link group.
There are multiple ways to fix that: using list_add_tail() allows
to scan older link groups first for free buffers which ensures that
buffers are reused first. This fixes the problem for smc-r link groups
as well. For smc-d there is an even better way to address this problem
because smc-d does not have the 255 connections per link group limit.
So fix the problem for smc-d by allowing large link groups.
Fixes: c6ba7c9ba4 ("net/smc: add base infrastructure for SMC-D and ISM")
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To get a send slot smc_wr_tx_get_free_slot() is called, which might
wait for a free slot. When smc_wr_tx_get_free_slot() returns there is a
check if the connection was killed in the meantime. In that case don't
only return an error, but also put back the free slot.
Fixes: b290098092 ("net/smc: cancel send and receive for terminated socket")
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rxrpc_sendmsg() returns EPIPE if there's an outstanding error, such as if
rxrpc_recvmsg() indicating ENODATA if there's nothing for it to read.
Change rxrpc_recvmsg() to return EAGAIN instead if there's nothing to read
as this particular error doesn't get stored in ->sk_err by the networking
core.
Also change rxrpc_sendmsg() so that it doesn't fail with delayed receive
errors (there's no way for it to report which call, if any, the error was
caused by).
Fixes: 17926a7932 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that we have all the infrastructure in place for calling into the
dsa_ptr->netdev_ops function pointers, install them when we configure
the DSA CPU/management interface and tear them down. The flow is
unchanged from before, but now we preserve equality of tests when
network device drivers do tests like dev->netdev_ops == &foo_ops which
was not the case before since we were allocating an entirely new
structure.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make the core net_device code call into our ndo_do_ioctl() and
ndo_get_phys_port_name() functions via the wrappers defined previously
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for adding another layer of call into a DSA stacked ops
singleton, wrap the ndo_do_ioctl() call into dev_do_ioctl().
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add setsockopt SOL_IP/IP_RECVERR_4884 to return the offset to an
extension struct if present.
ICMP messages may include an extension structure after the original
datagram. RFC 4884 standardized this behavior. It stores the offset
in words to the extension header in u8 icmphdr.un.reserved[1].
The field is valid only for ICMP types destination unreachable, time
exceeded and parameter problem, if length is at least 128 bytes and
entire packet does not exceed 576 bytes.
Return the offset to the start of the extension struct when reading an
ICMP error from the error queue, if it matches the above constraints.
Do not return the raw u8 field. Return the offset from the start of
the user buffer, in bytes. The kernel does not return the network and
transport headers, so subtract those.
Also validate the headers. Return the offset regardless of validation,
as an invalid extension must still not be misinterpreted as part of
the original datagram. Note that !invalid does not imply valid. If
the extension version does not match, no validation can take place,
for instance.
For backward compatibility, make this optional, set by setsockopt
SOL_IP/IP_RECVERR_RFC4884. For API example and feature test, see
github.com/wdebruij/kerneltools/blob/master/tests/recv_icmp_v2.c
For forward compatibility, reserve only setsockopt value 1, leaving
other bits for additional icmp extensions.
Changes
v1->v2:
- convert word offset to byte offset from start of user buffer
- return in ee_data as u8 may be insufficient
- define extension struct and object header structs
- return len only if constraints met
- if returning len, also validate
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is just used once, and a direct return for the redirect to the AF
case is much easier to follow than jumping to the end of a very long
function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the kernel pointer that sctp_setsockopt has available instead of
directly handling the user pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the kernel pointer that sctp_setsockopt has available instead of
directly handling the user pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the kernel pointer that sctp_setsockopt has available instead of
directly handling the user pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the kernel pointer that sctp_setsockopt has available instead of
directly handling the user pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the kernel pointer that sctp_setsockopt has available instead of
directly handling the user pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the kernel pointer that sctp_setsockopt has available instead of
directly handling the user pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the kernel pointer that sctp_setsockopt has available instead of
directly handling the user pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the kernel pointer that sctp_setsockopt has available instead of
directly handling the user pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the kernel pointer that sctp_setsockopt has available instead of
directly handling the user pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the kernel pointer that sctp_setsockopt has available instead of
directly handling the user pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the kernel pointer that sctp_setsockopt has available instead of
directly handling the user pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the kernel pointer that sctp_setsockopt has available instead of
directly handling the user pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the kernel pointer that sctp_setsockopt has available instead of
directly handling the user pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the kernel pointer that sctp_setsockopt has available instead of
directly handling the user pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the kernel pointer that sctp_setsockopt has available instead of
directly handling the user pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the kernel pointer that sctp_setsockopt has available instead of
directly handling the user pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the kernel pointer that sctp_setsockopt has available instead of
directly handling the user pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the kernel pointer that sctp_setsockopt has available instead of
directly handling the user pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the kernel pointer that sctp_setsockopt has available instead of
directly handling the user pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the kernel pointer that sctp_setsockopt has available instead of
directly handling the user pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the kernel pointer that sctp_setsockopt has available instead of
directly handling the user pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the kernel pointer that sctp_setsockopt has available instead of
directly handling the user pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the kernel pointer that sctp_setsockopt has available instead of
directly handling the user pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the kernel pointer that sctp_setsockopt has available instead of
directly handling the user pointer. Adapt sctp_setsockopt to use a
kzfree for this case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Switch from kzfree to sctp_setsockopt_auth_key + kfree to prepare for
moving the kfree to common code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the kernel pointer that sctp_setsockopt has available instead of
directly handling the user pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the kernel pointer that sctp_setsockopt has available instead of
directly handling the user pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the kernel pointer that sctp_setsockopt has available instead of
directly handling the user pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the kernel pointer that sctp_setsockopt has available instead of
directly handling the user pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the kernel pointer that sctp_setsockopt has available instead of
directly handling the user pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the kernel pointer that sctp_setsockopt has available instead of
directly handling the user pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the kernel pointer that sctp_setsockopt has available instead of
directly handling the user pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the kernel pointer that sctp_setsockopt has available instead of
directly handling the user pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the kernel pointer that sctp_setsockopt has available instead of
directly handling the user pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the kernel pointer that sctp_setsockopt has available instead of
directly handling the user pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the kernel pointer that sctp_setsockopt has available instead of
directly handling the user pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the kernel pointer that sctp_setsockopt has available instead of
directly handling the user pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the kernel pointer that sctp_setsockopt has available instead of
directly handling the user pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the kernel pointer that sctp_setsockopt has available instead of
directly handling the user pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the kernel pointer that sctp_setsockopt has available instead of
directly handling the user pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the kernel pointer that sctp_setsockopt has available instead of
directly handling the user pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the kernel pointer that sctp_setsockopt has available instead of
directly handling the user pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the kernel pointer that sctp_setsockopt has available instead of
directly handling the user pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the kernel pointer that sctp_setsockopt has available instead of
directly handling the user pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the kernel pointer that sctp_setsockopt has available instead of
directly handling the user pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the kernel pointer that sctp_setsockopt has available instead of
directly handling the user pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the kernel pointer that sctp_setsockopt has available instead of
directly handling the user pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the kernel pointer that sctp_setsockopt has available instead of
directly handling the user pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rename sctp_setsockopt_bindx_kernel back to sctp_setsockopt_bindx,
and use the kernel pointer that sctp_setsockopt has available instead of
directly handling the user pointer in the old sctp_setsockopt_bindx.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prepare for for moving the copy_from_user from the individual sockopts
to the main setsockopt helper. As of this commit the kopt variable
is not used yet, but the following commits will start using it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Just check for a NULL method instead of wiring up
sock_no_{get,set}sockopt.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Handle the few cases that need special treatment in-line using
in_compat_syscall(). This also removes all the now unused
compat_{get,set}sockopt methods.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Factor out one helper each for setting the native and compat
version of the MCAST_MSFILTER option.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Factor out one helper each for setting the native and compat
version of the MCAST_MSFILTER option.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Factor out one helper each for getting the native and compat
version of the MCAST_MSFILTER option.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Handle the few cases that need special treatment in-line using
in_compat_syscall().
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Factor out one helper each for setting the native and compat
version of the MCAST_MSFILTER option.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Factor out one helper each for setting the native and compat
version of the MCAST_MSFILTER option.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Factor out one helper each for getting the native and compat
version of the MCAST_MSFILTER option.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Split nf_sockopt into a getsockopt and setsockopt side as they share
very little code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lift the in_compat_syscall() from the callers instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
All instances handle compat sockopts via in_compat_syscall() now, so
remove the compat_{get,set} methods as well as the
compat_nf_{get,set}sockopt wrappers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge the native and compat {get,set}sockopt handlers using
in_compat_syscall(). Note that this required moving a fair
amout of code around to be done sanely.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge the native and compat {get,set}sockopt handlers using
in_compat_syscall().
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge the native and compat {get,set}sockopt handlers using
in_compat_syscall().
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge the native and compat {get,set}sockopt handlers using
in_compat_syscall().
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that the ->compat_{get,set}sockopt proto_ops methods are gone
there is no good reason left to keep the compat syscalls separate.
This fixes the odd use of unsigned int for the compat_setsockopt
optlen and the missing sock_use_custom_sol_socket.
It would also easily allow running the eBPF hooks for the compat
syscalls, but such a large change in behavior does not belong into
a consolidation patch like this one.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the compat handling to sock_common_{get,set}sockopt instead,
keyed of in_compat_syscall(). This allow to remove the now unused
->compat_{get,set}sockopt methods from struct proto_ops.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a helper that copies either a native or compat bpf_fprog from
userspace after verifying the length, and remove the compat setsockopt
handlers that now aren't required.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Return early when sockfd_lookup_light fails to reduce a level of
indentation for most of the function body.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Return early when sockfd_lookup_light fails to reduce a level of
indentation for most of the function body.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
All implementations of these two methods are dummies that always
return -EINVAL.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Delete the doubled word "be" in a comment.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Cc: netdev@vger.kernel.org
Cc: linux-rdma@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Delete the doubled word "the" in a comment.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
When a listen socket is closed then all non-accepted sockets in its
accept queue are to be released. Inside __smc_release() the helper
smc_restore_fallback_changes() restores the changes done to the socket
without to check if the clcsocket has a file set. This can result in
a crash. Fix this by checking the file pointer first.
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Fixes: f536dffc0b ("net/smc: fix closing of fallback SMC sockets")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Two buffers are allocated for each SMC connection. Each buffer is
added to a buffer list after creation. When the second buffer
allocation fails, the first buffer is freed but not deleted from
the list. This might result in crashes when another connection picks
up the freed buffer later and starts to work with it.
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Fixes: 6511aad3f0 ("net/smc: change smc_buf_free function parameters")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The dma related ...sync_sg... functions check the link state before the
dma function is actually called. But the check in smc_link_usable()
allows links in ACTIVATING state which are not yet mapped to dma memory.
Under high load it may happen that the sync_sg functions are called for
such a link which results in an debug output like
DMA-API: mlx5_core 0002:00:00.0: device driver tries to sync
DMA memory it has not allocated [device address=0x0000000103370000]
[size=65536 bytes]
To fix that introduce a helper to check for the link state ACTIVE and
use it where appropriate. And move the link state update to ACTIVATING
to the end of smcr_link_init() when most initial setup is done.
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Fixes: d854fcbfae ("net/smc: add new link state and related helpers")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As smc client the delete link requests are assigned to the flow when
_any_ flow is active. This may break other flows that do not expect
delete link requests during their handling. Fix that by assigning the
request only when an add link flow is active. With that fix the code
for smc client and smc server is the same, so remove the separate
handling.
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Fixes: 9ec6bf19ec ("net/smc: llc_del_link_work and use the LLC flow for delete link")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a new ib device is up smc will send an add link invitation to the
peer if needed. This is currently done with rudimentary flow control.
Under high workload these add link invitations can disturb other llc
flows because they arrive unexpected. Fix this by integrating the
invitations into the normal llc event flow and handle them as a flow.
While at it, check for already assigned requests in the flow before
the new add link request is assigned.
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Fixes: 1f90a05d9f ("net/smc: add smcr_port_add() and smcr_link_up() processing")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To be save from unexpected or late llc response messages check if the
arrived message fits to the current flow type and drop out-of-flow
messages. And drop it when there is already a response assigned to
the flow.
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Fixes: ef79d439cd ("net/smc: process llc responses in tasklet context")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Before an smc ib device is used the first time for an smc link it is
lazily initialized. When there are 2 active link groups and a new ib
device is brought online then it might happen that 2 link creations run
in parallel and enter smc_ib_setup_per_ibdev(). Both allocate new send
and receive completion queues on the device, but only one set of them
keeps assigned and the other leaks.
Fix that by protecting the setup and cleanup code using a mutex.
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Fixes: f3c1deddb2 ("net/smc: separate function for link initialization")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For new rdma connections the SMC server assigns the link and sends the
link data in the clc accept message. To match the correct link use not
only the qp_num but also the gid and the mac of the links. If there are
equal qp_nums for different links the wrong link would be chosen.
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Fixes: 0fb0b02bd6 ("net/smc: adapt SMC client code to use the LLC flow")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In a link-down condition we notify the SMC server and expect that the
server will finally trigger the link clear processing on the client
side. This could fail when anything along this notification path goes
wrong. Clear the link as part of SMC client link-down processing to
prevent dangling links.
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Fixes: 541afa10c1 ("net/smc: add smcr_port_err() and smcr_link_down() processing")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A delete link could arrive during confirm link processing. Handle this
situation directly in smc_llc_srv_conf_link() rather than using the
logic in smc_llc_wait() to avoid the unexpected message handling there.
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Fixes: 1551c95b61 ("net/smc: final part of add link processing as SMC server")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
p9_read_work and p9_fd_cancelled may be called concurrently.
In some cases, req->req_list may be deleted by both p9_read_work
and p9_fd_cancelled.
We can fix it by ignoring replies associated with a cancelled
request and ignoring cancelled request if message has been received
before lock.
Link: http://lkml.kernel.org/r/20200612090833.36149-1-wanghai38@huawei.com
Fixes: 60ff779c4a ("9p: client: remove unused code and any reference to "cancelled" function")
Cc: <stable@vger.kernel.org> # v3.12+
Reported-by: syzbot+77a25acfa0382e06ab23@syzkaller.appspotmail.com
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
p9_fd_open just fgets file descriptors passed in from userspace, but
doesn't verify that they are valid for read or writing. This gets
cought down in the VFS when actually attempting a read or write, but
a new warning added in linux-next upsets syzcaller.
Fix this by just verifying the fds early on.
Link: http://lkml.kernel.org/r/20200710085722.435850-1-hch@lst.de
Reported-by: syzbot+e6f77e16ff68b2434a2c@syzkaller.appspotmail.com
Signed-off-by: Christoph Hellwig <hch@lst.de>
[Dominique: amend goto as per Doug Nazar's review]
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Same as for udp4, let BPF program override the socket lookup result, by
selecting a receiving socket of its choice or failing the lookup, if no
connected UDP socket matched packet 4-tuple.
Suggested-by: Marek Majkowski <marek@cloudflare.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200717103536.397595-11-jakub@cloudflare.com
Prepare for calling into reuseport from __udp6_lib_lookup as well.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200717103536.397595-10-jakub@cloudflare.com
Following INET/TCP socket lookup changes, modify UDP socket lookup to let
BPF program select a receiving socket before searching for a socket by
destination address and port as usual.
Lookup of connected sockets that match packet 4-tuple is unaffected by this
change. BPF program runs, and potentially overrides the lookup result, only
if a 4-tuple match was not found.
Suggested-by: Marek Majkowski <marek@cloudflare.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200717103536.397595-9-jakub@cloudflare.com
Prepare for calling into reuseport from __udp4_lib_lookup as well.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200717103536.397595-8-jakub@cloudflare.com
Following ipv4 stack changes, run a BPF program attached to netns before
looking up a listening socket. Program can return a listening socket to use
as result of socket lookup, fail the lookup, or take no action.
Suggested-by: Marek Majkowski <marek@cloudflare.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200717103536.397595-7-jakub@cloudflare.com
Prepare for calling into reuseport from inet6_lookup_listener as well.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200717103536.397595-6-jakub@cloudflare.com
Run a BPF program before looking up a listening socket on the receive path.
Program selects a listening socket to yield as result of socket lookup by
calling bpf_sk_assign() helper and returning SK_PASS code. Program can
revert its decision by assigning a NULL socket with bpf_sk_assign().
Alternatively, BPF program can also fail the lookup by returning with
SK_DROP, or let the lookup continue as usual with SK_PASS on return, when
no socket has been selected with bpf_sk_assign().
This lets the user match packets with listening sockets freely at the last
possible point on the receive path, where we know that packets are destined
for local delivery after undergoing policing, filtering, and routing.
With BPF code selecting the socket, directing packets destined to an IP
range or to a port range to a single socket becomes possible.
In case multiple programs are attached, they are run in series in the order
in which they were attached. The end result is determined from return codes
of all the programs according to following rules:
1. If any program returned SK_PASS and selected a valid socket, the socket
is used as result of socket lookup.
2. If more than one program returned SK_PASS and selected a socket,
last selection takes effect.
3. If any program returned SK_DROP, and no program returned SK_PASS and
selected a socket, socket lookup fails with -ECONNREFUSED.
4. If all programs returned SK_PASS and none of them selected a socket,
socket lookup continues to htable-based lookup.
Suggested-by: Marek Majkowski <marek@cloudflare.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200717103536.397595-5-jakub@cloudflare.com
Prepare for calling into reuseport from __inet_lookup_listener as well.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200717103536.397595-4-jakub@cloudflare.com
Add a new program type BPF_PROG_TYPE_SK_LOOKUP with a dedicated attach type
BPF_SK_LOOKUP. The new program kind is to be invoked by the transport layer
when looking up a listening socket for a new connection request for
connection oriented protocols, or when looking up an unconnected socket for
a packet for connection-less protocols.
When called, SK_LOOKUP BPF program can select a socket that will receive
the packet. This serves as a mechanism to overcome the limits of what
bind() API allows to express. Two use-cases driving this work are:
(1) steer packets destined to an IP range, on fixed port to a socket
192.0.2.0/24, port 80 -> NGINX socket
(2) steer packets destined to an IP address, on any port to a socket
198.51.100.1, any port -> L7 proxy socket
In its run-time context program receives information about the packet that
triggered the socket lookup. Namely IP version, L4 protocol identifier, and
address 4-tuple. Context can be further extended to include ingress
interface identifier.
To select a socket BPF program fetches it from a map holding socket
references, like SOCKMAP or SOCKHASH, and calls bpf_sk_assign(ctx, sk, ...)
helper to record the selection. Transport layer then uses the selected
socket as a result of socket lookup.
In its basic form, SK_LOOKUP acts as a filter and hence must return either
SK_PASS or SK_DROP. If the program returns with SK_PASS, transport should
look for a socket to receive the packet, or use the one selected by the
program if available, while SK_DROP informs the transport layer that the
lookup should fail.
This patch only enables the user to attach an SK_LOOKUP program to a
network namespace. Subsequent patches hook it up to run on local delivery
path in ipv4 and ipv6 stacks.
Suggested-by: Marek Majkowski <marek@cloudflare.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200717103536.397595-3-jakub@cloudflare.com
Validate MAC address before copying the same to outgoing frame
skb destination address. Since a node can have zero mac
address for Link B until a valid frame is received over
that link, this fix address the issue of a zero MAC address
being in the packet.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For small Ethernet frames with size less than minimum size 66 for HSR
vs 60 for regular Ethernet frames, hsr driver currently doesn't pad the
frame to make it minimum size. This results in incorrect LSDU size being
populated in the HSR tag for these frames. Fix this by padding the frame
to the minimum size applicable for HSR.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When nfc_register_device fails in nci_register_device,
destroy_workqueue() shouled be called to destroy ndev->tx_wq.
Fixes: 3c1c0f5dc8 ("NFC: NCI: Fix nci_register_device init sequence")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are two existing SNMP counters, TCPDSACKRecv and TCPDSACKOfoRecv,
which are incremented depending on whether the DSACKed range is below
the cumulative ACK sequence number or not. Unfortunately, these both
implicitly assume each DSACK covers only one segment. This makes these
counters unusable for estimating spurious retransmit rates,
or real/non-spurious loss rate.
This patch introduces a new SNMP counter, TCPDSACKRecvSegs, which tracks
the estimated number of duplicate segments based on:
(DSACKed sequence range) / MSS. This counter is usable for estimating
spurious retransmit rates, or real/non-spurious loss rate.
Signed-off-by: Priyaranjan Jha <priyarjha@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, while processing DSACK, we assume DSACK covers only one
segment. This leads to significant underestimation of DSACKs with
LRO/GRO. This patch fixes segment accounting with DSACK by estimating
segment count from DSACK sequence range / MSS.
Signed-off-by: Priyaranjan Jha <priyarjha@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Yousuk Seung <ysseung@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
since commit d47a721520 ("mptcp: fix race in subflow_data_ready()"), it
is possible to observe a regression in MP_JOIN kselftests. For sockets in
TCP_CLOSE state, it's not sufficient to just wake up the main socket: we
also need to ensure that received data are made available to the reader.
Silence the WARN_ON_ONCE() in these cases: it preserves the syzkaller fix
and restores kselftests when they are ran as follows:
# while true; do
> make KBUILD_OUTPUT=/tmp/kselftest TARGETS=net/mptcp kselftest
> done
Reported-by: Florian Westphal <fw@strlen.de>
Fixes: d47a721520 ("mptcp: fix race in subflow_data_ready()")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/47
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch reorders the masks array every 4 seconds based on their
usage count. This greatly reduces the masks per packet hit, and
hence the overall performance. Especially in the OVS/OVN case for
OpenShift.
Here are some results from the OVS/OVN OpenShift test, which use
8 pods, each pod having 512 uperf connections, each connection
sends a 64-byte request and gets a 1024-byte response (TCP).
All uperf clients are on 1 worker node while all uperf servers are
on the other worker node.
Kernel without this patch : 7.71 Gbps
Kernel with this patch applied: 14.52 Gbps
We also run some tests to verify the rebalance activity does not
lower the flow insertion rate, which does not.
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Tested-by: Andrew Theurer <atheurer@redhat.com>
Reviewed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Better to unregister the file system before destroying the kmem_cache
cache of the inodes, so that the inodes are freed before we are trying
to destroy it. Otherwise, kmem_cache yells that some objects are live.
Signed-off-by: Dan Aloni <dan@kernelim.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Naresh reported some compile errors:
arm build failed due this error on linux-next 20200713 and 20200713
net/ipv6/ip6_vti.o: In function `vti6_rcv_tunnel':
ip6_vti.c:(.text+0x1d20): undefined reference to `xfrm6_tunnel_spi_lookup'
This happened when set CONFIG_IPV6_VTI=y and CONFIG_INET6_TUNNEL=m.
We don't really want ip6_vti to depend inet6_tunnel completely, but
only to disable the tunnel code when inet6_tunnel is not seen.
So instead of adding "select INET6_TUNNEL" for IPV6_VTI, this patch
is only to change to IS_REACHABLE to avoid these compile error.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes: 08622869ed ("ip6_vti: support IP6IP6 tunnel processing with .cb_handler")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
kernel test robot reported some compile errors:
ia64-linux-ld: net/xfrm/xfrm_interface.o: in function `xfrmi4_fini':
net/xfrm/xfrm_interface.c:900: undefined reference to `xfrm4_tunnel_deregister'
ia64-linux-ld: net/xfrm/xfrm_interface.c:901: undefined reference to `xfrm4_tunnel_deregister'
ia64-linux-ld: net/xfrm/xfrm_interface.o: in function `xfrmi4_init':
net/xfrm/xfrm_interface.c:873: undefined reference to `xfrm4_tunnel_register'
ia64-linux-ld: net/xfrm/xfrm_interface.c:876: undefined reference to `xfrm4_tunnel_register'
ia64-linux-ld: net/xfrm/xfrm_interface.c:885: undefined reference to `xfrm4_tunnel_deregister'
This happened when set CONFIG_XFRM_INTERFACE=y and CONFIG_INET_TUNNEL=m.
We don't really want xfrm_interface to depend inet_tunnel completely,
but only to disable the tunnel code when inet_tunnel is not seen.
So instead of adding "select INET_TUNNEL" for XFRM_INTERFACE, this patch
is only to change to IS_REACHABLE to avoid these compile error.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: da9bbf0598 ("xfrm: interface: support IPIP and IPIP6 tunnels processing with .cb_handler")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
In case we're compiling espintcp support only for IPv6, we should
still initialize the common code.
Fixes: 26333c37fc ("xfrm: add IPv6 support for espintcp")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
man 2 recv says:
RETURN VALUE
When a stream socket peer has performed an orderly shutdown, the
return value will be 0 (the traditional "end-of-file" return).
Currently, this works for blocking reads, but non-blocking reads will
return -EAGAIN. This patch overwrites that return value when the peer
won't send us any more data.
Fixes: e27cca96cd ("xfrm: add espintcp (RFC 8229)")
Reported-by: Andrew Cagney <cagney@libreswan.org>
Tested-by: Andrew Cagney <cagney@libreswan.org>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Currently, non-blocking sends from userspace result in EOPNOTSUPP.
To support this, we need to tell espintcp_sendskb_locked() and
espintcp_sendskmsg_locked() that non-blocking operation was requested
from espintcp_sendmsg().
Fixes: e27cca96cd ("xfrm: add espintcp (RFC 8229)")
Reported-by: Andrew Cagney <cagney@libreswan.org>
Tested-by: Andrew Cagney <cagney@libreswan.org>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Mirred currently does not mix well with blocks executed after the qdisc
root lock is taken. This includes classification blocks (such as in PRIO,
ETS, DRR qdiscs) and qevents. The locking caused by the packet mirrored by
mirred can cause deadlocks: either when the thread of execution attempts to
take the lock a second time, or when two threads end up waiting on each
other's locks.
The qevent patchset attempted to not introduce further badness of this
sort, and dropped the lock before executing the qevent block. However this
lead to too little locking and races between qdisc configuration and packet
enqueue in the RED qdisc.
Before the deadlock issues are solved in a way that can be applied across
many qdiscs reasonably easily, do for qevents what is done for the
classification blocks and just keep holding the root lock.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using uninitialized_var() is dangerous as it papers over real bugs[1]
(or can in the future), and suppresses unrelated compiler warnings
(e.g. "unused variable"). If the compiler thinks it is uninitialized,
either simply initialize the variable or make compiler changes.
In preparation for removing[2] the[3] macro[4], remove all remaining
needless uses with the following script:
git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \
xargs perl -pi -e \
's/\buninitialized_var\(([^\)]+)\)/\1/g;
s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;'
drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid
pathological white-space.
No outstanding warnings were found building allmodconfig with GCC 9.3.0
for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64,
alpha, and m68k.
[1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/
[2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/
[3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/
[4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/
Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5
Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB
Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers
Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs
Signed-off-by: Kees Cook <keescook@chromium.org>
A busy-wait loop is used to implement waiting for bits to be copied
from the skb to the kernel buffer before retiring a block. This is
a problem on PREEMPT_RT because the copying task could be preempted
by the busy-waiting task and thus live lock in the busy-wait loop.
Replace the busy-wait logic with an rwlock_t. This provides lockdep
coverage and makes the code RT ready.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce the capability to attach an eBPF program to cpumap entries.
The idea behind this feature is to add the possibility to define on
which CPU run the eBPF program if the underlying hw does not support
RSS. Current supported verdicts are XDP_DROP and XDP_PASS.
This patch has been tested on Marvell ESPRESSObin using xdp_redirect_cpu
sample available in the kernel tree to identify possible performance
regressions. Results show there are no observable differences in
packet-per-second:
$./xdp_redirect_cpu --progname xdp_cpu_map0 --dev eth0 --cpu 1
rx: 354.8 Kpps
rx: 356.0 Kpps
rx: 356.8 Kpps
rx: 356.3 Kpps
rx: 356.6 Kpps
rx: 356.6 Kpps
rx: 356.7 Kpps
rx: 355.8 Kpps
rx: 356.8 Kpps
rx: 356.8 Kpps
Co-developed-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/bpf/5c9febdf903d810b3415732e5cd98491d7d9067a.1594734381.git.lorenzo@kernel.org
Now that there's a function that calculates the SHA-256 digest of a
buffer in one step, use it instead of sha256_init() + sha256_update() +
sha256_final().
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Cc: mptcp@lists.01.org
Cc: Mat Martineau <mathew.j.martineau@linux.intel.com>
Cc: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the unnecessary label from dn_dev_ioctl() and make its error
handling simpler to read.
Signed-off-by: Suraj Upadhyay <usuraj35@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The nf_tables_rule_release() function frees "rule" so we have to use
the _safe() version of list_for_each_entry().
Fixes: d0e2c7de92 ("netfilter: nf_tables: add NFT_CHAIN_BINDING")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
sybot came up with following transaction:
add table ip syz0
add chain ip syz0 syz2 { type nat hook prerouting priority 0; policy accept; }
add table ip syz0 { flags dormant; }
delete chain ip syz0 syz2
delete table ip syz0
which yields:
hook not found, pf 2 num 0
WARNING: CPU: 0 PID: 6775 at net/netfilter/core.c:413 __nf_unregister_net_hook+0x3e6/0x4a0 net/netfilter/core.c:413
[..]
nft_unregister_basechain_hooks net/netfilter/nf_tables_api.c:206 [inline]
nft_table_disable net/netfilter/nf_tables_api.c:835 [inline]
nf_tables_table_disable net/netfilter/nf_tables_api.c:868 [inline]
nf_tables_commit+0x32d3/0x4d70 net/netfilter/nf_tables_api.c:7550
nfnetlink_rcv_batch net/netfilter/nfnetlink.c:486 [inline]
nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:544 [inline]
nfnetlink_rcv+0x14a5/0x1e50 net/netfilter/nfnetlink.c:562
netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline]
Problem is that when I added ability to override base hook registration
to make nat basechains register with the nat core instead of netfilter
core, I forgot to update nft_table_disable() to use that instead of
the 'raw' hook register interface.
In syzbot transaction, the basechain is of 'nat' type. Its registered
with the nat core. The switch to 'dormant mode' attempts to delete from
netfilter core instead.
After updating nft_table_disable/enable to use the correct helper,
nft_(un)register_basechain_hooks can be folded into the only remaining
caller.
Because nft_trans_table_enable() won't do anything when the DORMANT flag
is set, remove the flag first, then re-add it in case re-enablement
fails, else this patch breaks sequence:
add table ip x { flags dormant; }
/* add base chains */
add table ip x
The last 'add' will remove the dormant flags, but won't have any other
effect -- base chains are not registered.
Then, next 'set dormant flag' will create another 'hook not found'
splat.
Reported-by: syzbot+2570f2c036e3da5db176@syzkaller.appspotmail.com
Fixes: 4e25ceb80b ("netfilter: nf_tables: allow chain type to override hook register")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Currently the header size calculations are using an assignment
operator instead of a += operator when accumulating the header
size leading to incorrect sizes. Fix this by using the correct
operator.
Addresses-Coverity: ("Unused value")
Fixes: 302d3deb20 ("xprtrdma: Prevent inline overflow")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Add functionality to disable and remove advertising instances,
and use that functionality in MGMT add/remove advertising calls.
Currently, advertising is globally-disabled, i.e. all instances are
disabled together, even if hardware offloading is available. This
patch adds functionality to disable and remove individual adv
instances, solving two issues:
1. On new advertisement registration, a global disable was done, and
then only the new instance was enabled. This meant only the newest
instance was actually enabled.
2. On advertisement removal, the structure was removed, but the instance
was never disabled or removed, which is incorrect with hardware offload
support.
Signed-off-by: Daniel Winkler <danielwinkler@google.com>
Reviewed-by: Shyh-In Hwang <josephsih@chromium.org>
Reviewed-by: Alain Michaud <alainm@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-07-14
The following pull-request contains BPF updates for your *net-next* tree.
We've added 21 non-merge commits during the last 1 day(s) which contain
a total of 20 files changed, 308 insertions(+), 279 deletions(-).
The main changes are:
1) Fix selftests/bpf build, from Alexei.
2) Fix resolve_btfids build issues, from Jiri.
3) Pull usermode-driver-cleanup set, from Eric.
4) Two minor fixes to bpfilter, from Alexei and Masahiro.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a new port attribute, IFLA_BRPORT_MRP_IN_OPEN, which
allows to notify the userspace when the node lost the contiuity of
MRP_InTest frames.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch extends the function br_mrp_fill_info to return also the
status for the interconnect ring.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch extends the existing MRP netlink interface with the following
attributes: IFLA_BRIDGE_MRP_IN_ROLE, IFLA_BRIDGE_MRP_IN_STATE and
IFLA_BRIDGE_MRP_START_IN_TEST. These attributes are similar with their
ring attributes but they apply to the interconnect port.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thie patch adds support for MRP Interconnect. Similar with the MRP ring,
if the HW can't generate MRP_InTest frames, then the SW will try to
generate them. And if also the SW fails to generate the frames then an
error is return to userspace.
The forwarding/termination of MRP_In frames is happening in the kernel
and is done by MRP instances.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement the MRP API for interconnect switchdev. Similar with the other
br_mrp_switchdev function, these function will just eventually call the
switchdev functions: switchdev_port_obj_add/del.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This function notifies the userspace when the node lost the continuity
of MRP_InTest frames.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch renames the function br_mrp_port_open to
br_mrp_ring_port_open. In this way is more clear that a ring port lost
the continuity because there will be also a br_mrp_in_port_open.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch extends the 'struct br_mrp' to contain information regarding
the MRP interconnect. It contains the following:
- the interconnect port 'i_port', which is NULL if the node doesn't have
a interconnect role
- the interconnect id, which is similar with the ring id, but this field
is also part of the MRP_InTest frames.
- the interconnect role, which can be MIM or MIC.
- the interconnect state, which can be open or closed.
- the interconnect delayed_work for sending MRP_InTest frames and check
for lost of continuity.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Originally, bpfilter_umh was linked with -static only when
CONFIG_BPFILTER_UMH=y.
Commit 8a2cc0505c ("bpfilter: use 'userprogs' syntax to build
bpfilter_umh") silently, accidentally dropped the CONFIG_BPFILTER_UMH=y
test in the Makefile. Revive it in order to link it dynamically when
CONFIG_BPFILTER_UMH=m.
Since commit b1183b6dca ("bpfilter: check if $(CC) can link static
libc in Kconfig"), the compiler must be capable of static linking to
enable CONFIG_BPFILTER_UMH, but it requires more than needed.
To loosen the compiler requirement, I changed the dependency as follows:
depends on CC_CAN_LINK
depends on m || CC_CAN_LINK_STATIC
If CONFIG_CC_CAN_LINK_STATIC in unset, CONFIG_BPFILTER_UMH is restricted
to 'm' or 'n'.
In theory, CONFIG_CC_CAN_LINK is not required for CONFIG_BPFILTER_UMH=y,
but I did not come up with a good way to describe it.
Fixes: 8a2cc0505c ("bpfilter: use 'userprogs' syntax to build bpfilter_umh")
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Michal Kubecek <mkubecek@suse.cz>
Link: https://lore.kernel.org/bpf/20200701092644.762234-1-masahiroy@kernel.org
Make sure 'pos' is initialized to zero before calling kernel_write().
Fixes: d2ba09c17a ("net: add skeleton of bpfilter kernel module")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
As we did in the last 2 patches for vti(6), this patch is to define a
new xfrm_tunnel object 'xfrmi_ipip6_handler' to register for AF_INET6,
and a new xfrm6_tunnel object 'xfrmi_ip6ip_handler' to register for
AF_INET.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
An xfrm6_tunnel object is linked into the list when registering,
so vti_ipv6_handler can not be registered twice, otherwise its
next pointer will be overwritten on the second time.
So this patch is to define a new xfrm6_tunnel object to register
for AF_INET.
Fixes: 2ab110cbb0 ("ip6_vti: support IP6IP tunnel processing")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
An xfrm_tunnel object is linked into the list when registering,
so vti_ipip_handler can not be registered twice, otherwise its
next pointer will be overwritten on the second time.
So this patch is to define a new xfrm_tunnel object to register
for AF_INET6.
Fixes: e6ce64570f ("ip_vti: support IPIP6 tunnel processing")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-07-13
The following pull-request contains BPF updates for your *net-next* tree.
We've added 36 non-merge commits during the last 7 day(s) which contain
a total of 62 files changed, 2242 insertions(+), 468 deletions(-).
The main changes are:
1) Avoid trace_printk warning banner by switching bpf_trace_printk to use
its own tracing event, from Alan.
2) Better libbpf support on older kernels, from Andrii.
3) Additional AF_XDP stats, from Ciara.
4) build time resolution of BTF IDs, from Jiri.
5) BPF_CGROUP_INET_SOCK_RELEASE hook, from Stanislav.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
With this patch we try to kill 2 birds with 1 stone.
First of all, some switches that use tag_ocelot.c don't have the exact
same bitfield layout for the DSA tags. The destination ports field is
different for Seville VSC9953 for example. So the choices are to either
duplicate tag_ocelot.c into a new tag_seville.c (sub-optimal) or somehow
take into account a supposed ocelot->dest_ports_offset when packing this
field into the DSA injection header (again not ideal).
Secondly, tag_ocelot.c already needs to memset a 128-bit area to zero
and call some packing() functions of dubious performance in the
fastpath. And most of the values it needs to pack are pretty much
constant (BYPASS=1, SRC_PORT=CPU, DEST=port index). So it would be good
if we could improve that.
The proposed solution is to allocate a memory area per port at probe
time, initialize that with the statically defined bits as per chip
hardware revision, and just perform a simpler memcpy in the fastpath.
Other alternatives have been analyzed, such as:
- Create a separate tag_seville.c: too much code duplication for just 1
bit field difference.
- Create a separate DSA_TAG_PROTO_SEVILLE under tag_ocelot.c, just like
tag_brcm.c, which would have a separate .xmit function. Again, too
much code duplication for just 1 bit field difference.
- Allocate the template from the init function of the tag_ocelot.c
module, instead of from the driver: couldn't figure out a method of
accessing the correct port template corresponding to the correct
tagger in the .xmit function.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
KASAN report null-ptr-deref error when register_netdev() failed:
KASAN: null-ptr-deref in range [0x00000000000003c0-0x00000000000003c7]
CPU: 2 PID: 422 Comm: ip Not tainted 5.8.0-rc4+ #12
Call Trace:
ip6gre_init_net+0x4ab/0x580
? ip6gre_tunnel_uninit+0x3f0/0x3f0
ops_init+0xa8/0x3c0
setup_net+0x2de/0x7e0
? rcu_read_lock_bh_held+0xb0/0xb0
? ops_init+0x3c0/0x3c0
? kasan_unpoison_shadow+0x33/0x40
? __kasan_kmalloc.constprop.0+0xc2/0xd0
copy_net_ns+0x27d/0x530
create_new_namespaces+0x382/0xa30
unshare_nsproxy_namespaces+0xa1/0x1d0
ksys_unshare+0x39c/0x780
? walk_process_tree+0x2a0/0x2a0
? trace_hardirqs_on+0x4a/0x1b0
? _raw_spin_unlock_irq+0x1f/0x30
? syscall_trace_enter+0x1a7/0x330
? do_syscall_64+0x1c/0xa0
__x64_sys_unshare+0x2d/0x40
do_syscall_64+0x56/0xa0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
ip6gre_tunnel_uninit() has set 'ign->fb_tunnel_dev' to NULL, later
access to ign->fb_tunnel_dev cause null-ptr-deref. Fix it by saving
'ign->fb_tunnel_dev' to local variable ndev.
Fixes: dafabb6590 ("ip6_gre: fix use-after-free in ip6gre_tunnel_lookup()")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The sparse tool complains as follows:
net/core/dev.c:5594:1: warning:
symbol '__pcpu_scope_flush_works' was not declared. Should it be static?
'flush_works' is not used outside of dev.c, so marks
it static.
Fixes: 41852497a9 ("net: batch calls to flush_all_backlogs()")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously, shared blocks were only relevant for the pseudo-qdiscs ingress
and clsact. Recently, a qevent facility was introduced, which allows to
bind blocks to well-defined slots of a qdisc instance. RED in particular
got two qevents: early_drop and mark. Drivers that wish to offload these
blocks will be sent the usual notification, and need to know which qdisc it
is related to.
To that end, extend flow_block_offload with a "sch" pointer, and initialize
as appropriate. This prompts changes in the indirect block facility, which
now tracks the scheduler in addition to the netdevice. Update signatures of
several functions similarly.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simple fixes which require no deep knowledge of the code.
Cc: Andrew Hendry <andrew.hendry@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simple fixes which require no deep knowledge of the code.
Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simple fixes which require no deep knowledge of the code.
Cc: Jon Maloy <jmaloy@redhat.com>
Cc: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simple fixes which require no deep knowledge of the code.
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the warning "Function parameter or member 'inode' not described in
'__sock_release'' due to the kerneldoc being placed before
__sock_release() not sock_release(), which does not take an inode
parameter.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simple fixes which require no deep knowledge of the code.
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simple fixes which require no deep knowledge of the code.
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simple fixes which require no deep knowledge of the code.
Cc: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simple fixes which require no deep knowledge of the code.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simple fixes which require no deep knowledge of the code.
Cc: Paul Moore <paul@paul-moore.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simple fixes which require no deep knowledge of the code.
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Jozsef Kadlecsik <kadlec@netfilter.org>
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simple fixes which require no deep knowledge of the code.
Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simple fixes which require no deep knowledge of the code.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simple fixes which require no deep knowledge of the code.
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simple fixes which require no deep knowledge of the code.
Cc: Paul Moore <paul@paul-moore.com>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simple fixes which require no deep knowledge of the code.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simple fixes which require no deep knowledge of the code.
Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simple fixes which require no deep knowledge of the code.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simple fixes which require no deep knowledge of the code.
Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simple fixes which require no deep knowledge of the code.
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
It can be useful for the user to know the reason behind a dropped packet.
Introduce new counters which track drops on the receive path caused by:
1. rx ring being full
2. fill ring being empty
Also, on the tx path introduce a counter which tracks the number of times
we attempt pull from the tx ring when it is empty.
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200708072835.4427-2-ciara.loftus@intel.com
First, refactor: Dereference the svc_rdma_send_ctxt inside
svc_rdma_send() instead of at every call site.
Then, it can be passed into trace_svcrdma_post_send() to get the
proper completion ID.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Set up a completion ID in each svc_rdma_send_ctxt. The ID is used
to match an incoming Send completion to a transport and to a
previous ib_post_send().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
When recording a trace event in the Receive path, tie decoding
results and errors to an incoming Receive completion.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Set up a completion ID in each svc_rdma_recv_ctxt. The ID is used
to match an incoming Receive completion to a transport and to a
previous ib_post_recv().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Use these helpers in a few spots to demonstrate their use.
The remaining open-coded discriminator checks in rpcrdma will be
addressed in subsequent patches.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
- Use the _err naming convention instead
- Remove display of kernel memory address of the controlling xprt
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Final refactor: Replace internals of svc_rdma_send_error() with a
simple call to svc_rdma_send_error_msg().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Like svc_rdma_send_error(), have svc_rdma_send_error_msg() handle
any error conditions internally, rather than duplicating that
recovery logic at every call site.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The common "send RDMA_ERR" function should be in svc_rdma_sendto.c,
since that is where the other Send-related functions are located.
So from here, I will beef up svc_rdma_send_error_msg() and deprecate
svc_rdma_send_error().
A generic svc_rdma_send_error_msg() will need to handle both
ERR_CHUNK and ERR_VERS. Copy that logic from svc_rdma_send_error()
to svc_rdma_send_error_msg().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Another step towards making svc_rdma_send_error_msg() and
svc_rdma_send_error() similar enough to eliminate one of them.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Commit 4757d90b15 ("svcrdma: Report Write/Reply chunk overruns")
made an effort to preserve I/O pages until RDMA Write completion.
In a subsequent patch, I intend to de-duplicate the two functions
that send ERR_CHUNK responses. Pull the save_io_pages() call out of
svc_rdma_send_error_msg() to make it more like
svc_rdma_send_error().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Commit 07d0ff3b0c ("svcrdma: Clean up Read chunk path") moved the
page saver logic so that it gets executed event when an error occurs.
In that case, the I/O is never posted, and those pages are then
leaked. Errors in this path, however, are quite rare.
Fixes: 07d0ff3b0c ("svcrdma: Clean up Read chunk path")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Add similar tracepoints to those that were recently added on the
client side to track failures in the integ and priv unwrap paths.
And, let's collect the seqno-specific tracepoints together with a
common naming convention.
Regarding the gss_check_seq_num() changes: everywhere else treats
the GSS sequence number as an unsigned 32-bit integer. As far back
as 2.6.12, I couldn't find a compelling reason to do things
differently here. As a defensive change it's better to eliminate
needless implicit sign conversions.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
If bridge vlan filtering is not defined we won't have
br_vlan_can_enter_range and thus will get a compile error as was
reported by Stephen and the build bot. So let's define a stub for when
vlan filtering is not used.
Fixes: 9433944368 ("net: bridge: notify on vlan tunnel changes done via the old api")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For both pidfd and seccomp, the __user pointer is not used. Update
__receive_fd() to make writing to ufd optional via a NULL check. However,
for the receive_fd_user() wrapper, ufd is NULL checked so an -EFAULT
can be returned to avoid changing the SCM_RIGHTS interface behavior. Add
new wrapper receive_fd() for pidfd and seccomp that does not use the ufd
argument. For the new helper, the allocated fd needs to be returned on
success. Update the existing callers to handle it.
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Sargun Dhillon <sargun@sargun.me>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
In preparation for users of the "install a received file" logic outside
of net/ (pidfd and seccomp), relocate and rename __scm_install_fd() from
net/core/scm.c to __receive_fd() in fs/file.c, and provide a wrapper
named receive_fd_user(), as future patches will change the interface
to __receive_fd().
Additionally add a comment to fd_install() as a counterpoint to how
__receive_fd() interacts with fput().
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Dmitry Kadashev <dkadashev@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Ido Schimmel <idosch@idosch.org>
Cc: Ioana Ciornei <ioana.ciornei@nxp.com>
Cc: linux-fsdevel@vger.kernel.org
Cc: netdev@vger.kernel.org
Reviewed-by: Sargun Dhillon <sargun@sargun.me>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Duplicate the cleanups from commit 2618d530dd ("net/scm: cleanup
scm_detach_fds") into the compat code.
Replace open-coded __receive_sock() with a call to the helper.
Move the check added in commit 1f466e1f15 ("net: cleanly handle kernel
vs user buffers for ->msg_control") to before the compat call, even
though it should be impossible for an in-kernel call to also be compat.
Correct the int "flags" argument to unsigned int to match fd_install()
and similar APIs.
Regularize any remaining differences, including a whitespace issue,
a checkpatch warning, and add the check from commit 6900317f5e ("net,
scm: fix PaX detected msg_controllen overflow in scm_detach_fds") which
fixed an overflow unique to 64-bit. To avoid confusion when comparing
the compat handler to the native handler, just include the same check
in the compat handler.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Add missed sock updates to compat path via a new helper, which will be
used more in coming patches. (The net/core/scm.c code is left as-is here
to assist with -stable backports for the compat path.)
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 48a87cc26c ("net: netprio: fd passed in SCM_RIGHTS datagram not set correctly")
Fixes: d84295067f ("net: net_cls: fd passed in SCM_RIGHTS datagram not set correctly")
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Using BTF_ID_LIST macro to define lists for several helpers
using BTF arguments.
And running resolve_btfids on vmlinux elf object during linking,
so the .BTF_ids section gets the IDs resolved.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200711215329.41165-5-jolsa@kernel.org
Check `num_rsp` before using it as for-loop counter. Add `unlock` label.
Cc: stable@vger.kernel.org
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Check `num_rsp` before using it as for-loop counter.
Cc: stable@vger.kernel.org
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Ensure that the connect worker is awoken if an attempt to establish
a connection is unsuccessful. Otherwise the worker waits forever
and the transport workload hangs.
Connect errors should not attempt to destroy the ep, since the
connect worker continues to use it after the handler runs, so these
errors are now handled independently of DISCONNECTED events.
Reported-by: Dan Aloni <dan@kernelim.com>
Fixes: e28ce90083 ("xprtrdma: kmalloc rpcrdma_ep separate from rpcrdma_xprt")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
I noticed that when rpcrdma_xprt_connect() returns -ENOMEM,
instead of retrying the connect, the RPC client kills the
RPC task that requested the connection. We want a retry
here.
Fixes: cb586decbb ("xprtrdma: Make sendctx queue lifetime the same as connection lifetime")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Both Dan and I have observed two processes invoking
rpcrdma_xprt_disconnect() concurrently. In my case:
1. The connect worker invokes rpcrdma_xprt_disconnect(), which
drains the QP and waits for the final completion
2. This causes the newly posted Receive to flush and invoke
xprt_force_disconnect()
3. xprt_force_disconnect() sets CLOSE_WAIT and wakes up the RPC task
that is holding the transport lock
4. The RPC task invokes xprt_connect(), which calls ->ops->close
5. xprt_rdma_close() invokes rpcrdma_xprt_disconnect(), which tries
to destroy the QP.
Deadlock.
To prevent xprt_force_disconnect() from waking anything, handle the
clean up after a failed connection attempt in the xprt's sndtask.
The retry loop is removed from rpcrdma_xprt_connect() to ensure
that the newly allocated ep and id are properly released before
a REJECTED connection attempt can be retried.
Reported-by: Dan Aloni <dan@kernelim.com>
Fixes: e28ce90083 ("xprtrdma: kmalloc rpcrdma_ep separate from rpcrdma_xprt")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
In the error paths, there's no need to call kfree(ep) after calling
rpcrdma_ep_put(ep).
Fixes: e28ce90083 ("xprtrdma: kmalloc rpcrdma_ep separate from rpcrdma_xprt")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
xfrmi_lookup() is called on every packet. Using a single list for
looking up if_id becomes a bottleneck when having many xfrm interfaces.
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The xfrmi context exists in the netdevice priv context.
Avoid looking for it in a separate list.
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
If someone uses the old vlan API to configure tunnel mappings we'll only
generate the old-style full port notification. That would be a problem
if we are monitoring the new vlan notifications for changes. The patch
resolves the issue by adding vlan notifications to the old tunnel netlink
code. As usual we try to compress the notifications for as many vlans
in a range as possible, thus a vlan tunnel change is considered able
to enter the "current" vlan notification range if:
1. vlan exists
2. it has actually changed (curr_change == true)
3. it passes all standard vlan notification range checks done by
br_vlan_can_enter_range() such as option equality, id continuity etc
Note that vlan tunnel changes (add/del) are considered a part of vlan
options so only RTM_NEWVLAN notification is generated with the relevant
information inside.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Restore previous behavior of CAP_SYS_ADMIN wrt loading networking
BPF programs, from Maciej Żenczykowski.
2) Fix dropped broadcasts in mac80211 code, from Seevalamuthu
Mariappan.
3) Slay memory leak in nl80211 bss color attribute parsing code, from
Luca Coelho.
4) Get route from skb properly in ip_route_use_hint(), from Miaohe Lin.
5) Don't allow anything other than ARPHRD_ETHER in llc code, from Eric
Dumazet.
6) xsk code dips too deeply into DMA mapping implementation internals.
Add dma_need_sync and use it. From Christoph Hellwig
7) Enforce power-of-2 for BPF ringbuf sizes. From Andrii Nakryiko.
8) Check for disallowed attributes when loading flow dissector BPF
programs. From Lorenz Bauer.
9) Correct packet injection to L3 tunnel devices via AF_PACKET, from
Jason A. Donenfeld.
10) Don't advertise checksum offload on ipa devices that don't support
it. From Alex Elder.
11) Resolve several issues in TCP MD5 signature support. Missing memory
barriers, bogus options emitted when using syncookies, and failure
to allow md5 key changes in established states. All from Eric
Dumazet.
12) Fix interface leak in hsr code, from Taehee Yoo.
13) VF reset fixes in hns3 driver, from Huazhong Tan.
14) Make loopback work again with ipv6 anycast, from David Ahern.
15) Fix TX starvation under high load in fec driver, from Tobias
Waldekranz.
16) MLD2 payload lengths not checked properly in bridge multicast code,
from Linus Lüssing.
17) Packet scheduler code that wants to find the inner protocol
currently only works for one level of VLAN encapsulation. Allow
Q-in-Q situations to work properly here, from Toke
Høiland-Jørgensen.
18) Fix route leak in l2tp, from Xin Long.
19) Resolve conflict between the sk->sk_user_data usage of bpf reuseport
support and various protocols. From Martin KaFai Lau.
20) Fix socket cgroup v2 reference counting in some situations, from
Cong Wang.
21) Cure memory leak in mlx5 connection tracking offload support, from
Eli Britstein.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (146 commits)
mlxsw: pci: Fix use-after-free in case of failed devlink reload
mlxsw: spectrum_router: Remove inappropriate usage of WARN_ON()
net: macb: fix call to pm_runtime in the suspend/resume functions
net: macb: fix macb_suspend() by removing call to netif_carrier_off()
net: macb: fix macb_get/set_wol() when moving to phylink
net: macb: mark device wake capable when "magic-packet" property present
net: macb: fix wakeup test in runtime suspend/resume routines
bnxt_en: fix NULL dereference in case SR-IOV configuration fails
libbpf: Fix libbpf hashmap on (I)LP32 architectures
net/mlx5e: CT: Fix memory leak in cleanup
net/mlx5e: Fix port buffers cell size value
net/mlx5e: Fix 50G per lane indication
net/mlx5e: Fix CPU mapping after function reload to avoid aRFS RX crash
net/mlx5e: Fix VXLAN configuration restore after function reload
net/mlx5e: Fix usage of rcu-protected pointer
net/mxl5e: Verify that rpriv is not NULL
net/mlx5: E-Switch, Fix vlan or qos setting in legacy mode
net/mlx5: Fix eeprom support for SFP module
cgroup: Fix sock_cgroup_data on big-endian.
selftests: bpf: Fix detach from sockmap tests
...
Commit 0c3d79bce4 ("tcp: reduce SYN-ACK
retrans for TCP_DEFER_ACCEPT") introduces syn_ack_recalc() which decides
if a minisock is held and a SYN+ACK is retransmitted or not.
If rskq_defer_accept is not zero in syn_ack_recalc(), max_retries always
has the same value because max_retries is overwritten by rskq_defer_accept
in reqsk_timer_handler().
This commit adds three changes:
- remove redundant non-zero check for rskq_defer_accept in
reqsk_timer_handler().
- remove max_retries from the arguments of syn_ack_recalc() and use
rskq_defer_accept instead.
- rename thresh to max_syn_ack_retries for readability.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Reviewed-by: Benjamin Herrenschmidt <benh@amazon.com>
CC: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to use new devlink port health reporters infrastructure, add
corresponding constructor and destructor functions.
Signed-off-by: Vladyslav Tarasiuk <vladyslavt@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add devlink-health reporter support on per-port basis.
The main difference existing devlink-health is that port reporters are
stored in per-devlink_port lists. Upon creation of such health reporter the
reference to a port it belongs to is stored in reporter struct.
Fill the port index attribute in devlink-health response to
allow devlink userspace utility to distinguish between device and port
reporters.
Signed-off-by: Vladyslav Tarasiuk <vladyslavt@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a generic __devlink_health_reporter_find_by_name() that can be used
with arbitrary devlink health reporter list.
Signed-off-by: Vladyslav Tarasiuk <vladyslavt@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Devlink keeps its own reference to every reporter in a list and inits
refcount to 1 upon reporter's creation. Existing destructor waits to
free the memory indefinitely using msleep() until all references except
devlink's own are put.
Rework this mechanism by moving memory free routine to a separate
function, which is called when the last reporter reference is put.
Besides, it allows to call __devlink_health_reporter_destroy() while
locked on a reporters list mutex in symmetry to
__devlink_health_reporter_create(), which is required in follow-up
patch.
Signed-off-by: Vladyslav Tarasiuk <vladyslavt@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prepare a common routine in devlink_health_reporter_create() for usage
in similar functions for devlink port health reporters.
Signed-off-by: Vladyslav Tarasiuk <vladyslavt@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add an interface to report offloaded UDP ports via ethtool netlink.
Now that core takes care of tracking which UDP tunnel ports the NICs
are aware of we can quite easily export this information out to
user space.
The responsibility of writing the netlink dumps is split between
ethtool code and udp_tunnel_nic.c - since udp_tunnel module may
not always be loaded, yet we should always report the capabilities
of the NIC.
$ ethtool --show-tunnels eth0
Tunnel information for eth0:
UDP port table 0:
Size: 4
Types: vxlan
No entries
UDP port table 1:
Size: 4
Types: geneve, vxlan-gpe
Entries (1):
port 1230, vxlan-gpe
v4:
- back to v2, build fix is now directly in udp_tunnel.h
v3:
- don't compile ETHTOOL_MSG_TUNNEL_INFO_GET in if CONFIG_INET
not set.
v2:
- fix string set count,
- reorder enums in the uAPI,
- fix type of ETHTOOL_A_TUNNEL_UDP_TABLE_TYPES to bitset
in docs and comments.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cater to devices which:
(a) may want to sleep in the callbacks;
(b) only have IPv4 support;
(c) need all the programming to happen while the netdev is up.
Drivers attach UDP tunnel offload info struct to their netdevs,
where they declare how many UDP ports of various tunnel types
they support. Core takes care of tracking which ports to offload.
Use a fixed-size array since this matches what almost all drivers
do, and avoids a complexity and uncertainty around memory allocations
in an atomic context.
Make sure that tunnel drivers don't try to replay the ports when
new NIC netdev is registered. Automatic replays would mess up
reference counting, and will be removed completely once all drivers
are converted.
v4:
- use a #define NULL to avoid build issues with CONFIG_INET=n.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Reshuffle the (__)kernel_read and (__)kernel_write helpers, and ensure
all users of in-kernel file I/O use them if they don't use iov_iter
based methods already.
-----BEGIN PGP SIGNATURE-----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=eYsI
-----END PGP SIGNATURE-----
Merge tag 'cleanup-kernel_read_write' of git://git.infradead.org/users/hch/misc
Pull in-kernel read and write op cleanups from Christoph Hellwig:
"Cleanup in-kernel read and write operations
Reshuffle the (__)kernel_read and (__)kernel_write helpers, and ensure
all users of in-kernel file I/O use them if they don't use iov_iter
based methods already.
The new WARN_ONs in combination with syzcaller already found a missing
input validation in 9p. The fix should be on your way through the
maintainer ASAP".
[ This is prep-work for the real changes coming 5.9 ]
* tag 'cleanup-kernel_read_write' of git://git.infradead.org/users/hch/misc:
fs: remove __vfs_read
fs: implement kernel_read using __kernel_read
integrity/ima: switch to using __kernel_read
fs: add a __kernel_read helper
fs: remove __vfs_write
fs: implement kernel_write using __kernel_write
fs: check FMODE_WRITE in __kernel_write
fs: unexport __kernel_write
bpfilter: switch to kernel_write
autofs: switch to kernel_write
cachefiles: switch to kernel_write
Currently, all the input checks are done in driver.
After adding the split capability to devlink port, move the checks to
devlink.
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new attribute that indicates the split ability of devlink port.
Drivers are expected to set it via devlink_port_attrs_set(), before
registering the port.
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new devlink port attribute that indicates the port's number of lanes.
Drivers are expected to set it via devlink_port_attrs_set(), before
registering the port.
The attribute is not passed to user space in case the number of lanes is
invalid (0).
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, devlink_port_attrs_set accepts a long list of parameters,
that most of them are devlink port's attributes.
Use the devlink_port_attrs struct to replace the relevant parameters.
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The struct devlink_port_attrs holds the attributes of devlink_port.
Similarly to the previous patch, 'switch_port' attribute is another
exception.
Move 'switch_port' to be devlink_port's field.
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The struct devlink_port_attrs holds the attributes of devlink_port.
The 'set' field is not devlink_port's attribute as opposed to most of the
others.
Move 'set' to be devlink_port's field called 'attrs_set'.
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Several users of kallsyms_show_value() were performing checks not
during "open". Refactor everything needed to gain proper checks against
file->f_cred for modules, kprobes, and bpf.
-----BEGIN PGP SIGNATURE-----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=ib5Q
-----END PGP SIGNATURE-----
Merge tag 'kallsyms_show_value-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kallsyms fix from Kees Cook:
"Refactor kallsyms_show_value() users for correct cred.
I'm not delighted by the timing of getting these changes to you, but
it does fix a handful of kernel address exposures, and no one has
screamed yet at the patches.
Several users of kallsyms_show_value() were performing checks not
during "open". Refactor everything needed to gain proper checks
against file->f_cred for modules, kprobes, and bpf"
* tag 'kallsyms_show_value-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftests: kmod: Add module address visibility test
bpf: Check correct cred for CAP_SYSLOG in bpf_dump_raw_ok()
kprobes: Do not expose probe addresses to non-CAP_SYSLOG
module: Do not expose section addresses to non-CAP_SYSLOG
module: Refactor section attr into bin attribute
kallsyms: Refactor kallsyms_show_value() to take cred
exposes basic inet socket attribute, plus some MPTCP socket
fields comprising PM status and MPTCP-level sequence numbers.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
mptcp_token_iter_next() allow traversing all the MPTCP
sockets inside the token container belonging to the given
network namespace with a quite standard iterator semantic.
That will be used by the next patch, but keep the API generic,
as we plan to use this later for PM's sake.
Additionally export mptcp_token_get_sock(), as it also
will be used by the diag module.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit bf9765145b ("sock: Make sk_protocol a 16-bit value")
the current size of 'sdiag_protocol' is not sufficient to represent
the possible protocol values.
This change introduces a new inet diag request attribute to let
user space specify the relevant protocol number using u32 values.
The attribute is parsed by inet diag core on get/dump command
and the extended protocol value, if available, is preferred to
'sdiag_protocol' to lookup the diag handler.
The parse attributed are exposed to all the diag handlers via
the cb->data.
Note that inet_diag_dump_one_icsk() is left unmodified, as it
will not be used by protocol using the extended attribute.
Suggested-by: David S. Miller <davem@davemloft.net>
Co-developed-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Acked-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the genlmsg_put() call in ethnl_default_dumpit() fails, we bail out
without checking if we already have some messages in current skb like we do
with ethnl_default_dump_one() failure later. Therefore if existing messages
almost fill up the buffer so that there is not enough space even for
netlink and genetlink header, we lose all prepared messages and return and
error.
Rather than duplicating the skb->len check, move the genlmsg_put(),
genlmsg_cancel() and genlmsg_end() calls into ethnl_default_dump_one().
This is also more logical as all message composition will be in
ethnl_default_dump_one() and only iteration logic will be left in
ethnl_default_dumpit().
Fixes: 728480f124 ("ethtool: default handlers for GET requests")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When tcf_block_get() fails inside atm_tc_init(),
atm_tc_put() is called to release the qdisc p->link.q.
But the flow->ref prevents it to do so, as the flow->ref
is still zero.
Fix this by moving the p->link.ref initialization before
tcf_block_get().
Fixes: 6529eaba33 ("net: sched: introduce tcf block infractructure")
Reported-and-tested-by: syzbot+d411cff6ab29cc2c311b@syzkaller.appspotmail.com
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to ip_vti, IPIP and IPIP6 tunnels processing can easily
be done with .cb_handler for xfrm interface.
v1->v2:
- no change.
v2-v3:
- enable it only when CONFIG_INET_XFRM_TUNNEL is defined, to fix the
build error, reported by kbuild test robot.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Similar to ip6_vti, IP6IP6 and IP6IP tunnels processing can easily
be done with .cb_handler for xfrm interface.
v1->v2:
- no change.
v2-v3:
- enable it only when CONFIG_INET6_XFRM_TUNNEL is defined, to fix
the build error, reported by kbuild test robot.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The child tunnel if_id will be used for xfrm interface's lookup
when processing the IP(6)IP(6) packets in the next patches.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
For IP6IP tunnel processing, the functions called will be the
same as that for IP6IP6 tunnel's. So reuse it and register it
with family == AF_INET.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Similar to IPIP tunnel's processing, this patch is to support
IP6IP6 tunnel processing with .cb_handler.
v1->v2:
- no change.
v2-v3:
- enable it only when CONFIG_INET6_XFRM_TUNNEL is defined, to fix
the build error, reported by kbuild test robot.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
For IPIP6 tunnel processing, the functions called will be the
same as that for IPIP tunnel's. So reuse it and register it
with family == AF_INET6.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
With tunnel4_input_afinfo added, IPIP tunnel processing in
ip_vti can be easily done with .cb_handler. So replace the
processing by calling ip_tunnel_rcv() with it.
v1->v2:
- no change.
v2-v3:
- enable it only when CONFIG_INET_XFRM_TUNNEL is defined, to fix
the build error, reported by kbuild test robot.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This patch is to register a callback function tunnel6_rcv_cb with
is_ipip set in a xfrm_input_afinfo object for tunnel6 and tunnel46.
It will be called by xfrm_rcv_cb() from xfrm_input() when family
is AF_INET6 and proto is IPPROTO_IPIP or IPPROTO_IPV6.
v1->v2:
- Fix a sparse warning caused by the missing "__rcu", as Jakub
noticed.
- Handle the err returned by xfrm_input_register_afinfo() in
tunnel6_init/fini(), as Sabrina noticed.
v2->v3:
- Add "#if IS_ENABLED(CONFIG_INET6_XFRM_TUNNEL)" to fix the build error
when xfrm is disabled, reported by kbuild test robot
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This patch is to register a callback function tunnel4_rcv_cb with
is_ipip set in a xfrm_input_afinfo object for tunnel4 and tunnel64.
It will be called by xfrm_rcv_cb() from xfrm_input() when family
is AF_INET and proto is IPPROTO_IPIP or IPPROTO_IPV6.
v1->v2:
- Fix a sparse warning caused by the missing "__rcu", as Jakub
noticed.
- Handle the err returned by xfrm_input_register_afinfo() in
tunnel4_init/fini(), as Sabrina noticed.
v2->v3:
- Add "#if IS_ENABLED(CONFIG_INET_XFRM_TUNNEL)" to fix the build error
when xfrm is disabled, reported by kbuild test robot.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This patch is to add a new member is_ipip to struct xfrm_input_afinfo,
to allow another group family of callback functions to be registered
with is_ipip set.
This will be used for doing a callback for struct xfrm(6)_tunnel of
ipip/ipv6 tunnels in xfrm_input() by calling xfrm_rcv_cb(), which is
needed by ipip/ipv6 tunnels' support in ip(6)_vti and xfrm interface
in the next patches.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
When evaluating access control over kallsyms visibility, credentials at
open() time need to be used, not the "current" creds (though in BPF's
case, this has likely always been the same). Plumb access to associated
file->f_cred down through bpf_dump_raw_ok() and its callers now that
kallsysm_show_value() has been refactored to take struct cred.
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: bpf@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: 7105e828c0 ("bpf: allow for correlation of maps and helpers in dump")
Signed-off-by: Kees Cook <keescook@chromium.org>
A scenario has been observed where a 'bc_init' message for a link is not
retransmitted if it fails to be received by the peer. This leads to the
peer never establishing the link fully and it discarding all other data
received on the link. In this scenario the message is lost in transit to
the peer.
The issue is traced to the 'nxt_retr' field of the skb not being
initialised for links that aren't a bc_sndlink. This leads to the
comparison in tipc_link_advance_transmq() that gates whether to attempt
retransmission of a message performing in an undesirable way.
Depending on the relative value of 'jiffies', this comparison:
time_before(jiffies, TIPC_SKB_CB(skb)->nxt_retr)
may return true or false given that 'nxt_retr' remains at the
uninitialised value of 0 for non bc_sndlinks.
This is most noticeable shortly after boot when jiffies is initialised
to a high value (to flush out rollover bugs) and we compare a jiffies of,
say, 4294940189 to zero. In that case time_before returns 'true' leading
to the skb not being retransmitted.
The fix is to ensure that all skbs have a valid 'nxt_retr' time set for
them and this is achieved by refactoring the setting of this value into
a central function.
With this fix, transmission losses of 'bc_init' messages do not stall
the link establishment forever because the 'bc_init' message is
retransmitted and the link eventually establishes correctly.
Fixes: 382f598fb6 ("tipc: reduce duplicate packets for unicast traffic")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
This implements the known parts of the Realtek 4 byte
tag protocol version 0xA, as found in the RTL8366RB
DSA switch.
It is designated as protocol version 0xA as a
different Realtek 4 byte tag format with protocol
version 0x9 is known to exist in the Realtek RTL8306
chips.
The tag and switch chip lacks public documentation, so
the tag format has been reverse-engineered from
packet dumps. As only ingress traffic has been available
for analysis an egress tag has not been possible to
develop (even using educated guesses about bit fields)
so this is as far as it gets. It is not known if the
switch even supports egress tagging.
Excessive attempts to figure out the egress tag format
was made. When nothing else worked, I just tried all bit
combinations with 0xannp where a is protocol and p is
port. I looped through all values several times trying
to get a response from ping, without any positive
result.
Using just these ingress tags however, the switch
functionality is vastly improved and the packets find
their way into the destination port without any
tricky VLAN configuration. On the D-Link DIR-685 the
LAN ports now come up and respond to ping without
any command line configuration so this is a real
improvement for users.
Egress packets need to be restricted to the proper
target ports using VLAN, which the RTL8366RB DSA
switch driver already sets up.
Cc: DENG Qingfang <dqfext@gmail.com>
Cc: Mauri Sandberg <sandberg@mailfence.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Define 100G, 200G and 400G link modes using 100Gbps per lane
LR, ER and FR are defined as a single link mode because they are
using same technology and by design are fully interoperable.
EEPROM content indicates if the module is LR, ER, or FR, and the
user space ethtool decoder is planned to support decoding these
modes in the EEPROM.
Signed-off-by: Meir Lichtinger <meirl@mellanox.com>
CC: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the tx path of l2tp, l2tp_xmit_skb() calls skb_dst_set() to set
skb's dst. However, it will eventually call inet6_csk_xmit() or
ip_queue_xmit() where skb's dst will be overwritten by:
skb_dst_set_noref(skb, dst);
without releasing the old dst in skb. Then it causes dst/dev refcnt leak:
unregister_netdevice: waiting for eth0 to become free. Usage count = 1
This can be reproduced by simply running:
# modprobe l2tp_eth && modprobe l2tp_ip
# sh ./tools/testing/selftests/net/l2tp.sh
So before going to inet6_csk_xmit() or ip_queue_xmit(), skb's dst
should be dropped. This patch is to fix it by removing skb_dst_set()
from l2tp_xmit_skb() and moving skb_dst_drop() into l2tp_xmit_core().
Fixes: 3557baabf2 ("[L2TP]: PPP over L2TP driver core")
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: James Chapman <jchapman@katalix.com>
Tested-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 142240398e ("audit: add gfp parameter to audit_log_nfcfg")
incorrectly passed gfp flags to audit_log_nfcfg() which were not
consistent with the calling function, this commit fixes that.
Fixes: 142240398e ("audit: add gfp parameter to audit_log_nfcfg")
Reported-by: Jones Desougi <jones.desougi+netfilter@gmail.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Support for rejecting packets from the prerouting chain, from
Laura Garcia Liebana.
2) Remove useless assignment in pipapo, from Stefano Brivio.
3) On demand hook registration in IPVS, from Julian Anastasov.
4) Expire IPVS connection from process context to not overload
timers, also from Julian.
5) Fallback to conntrack TCP tracker to handle connection reuse
in IPVS, from Julian Anastasov.
6) Several patches to support for chain bindings.
7) Expose enum nft_chain_flags through UAPI.
8) Reject unsupported chain flags from the netlink control plane.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that we have moved the PHY ethtool statistics to be dynamically
registered, we no longer need to inline those for ethtool. This used to
be done to avoid cross symbol referencing and allow ethtool to be
decoupled from PHYLIB entirely.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
CLC proposal messages of future SMCD versions could be larger than SMCD
V1 CLC proposal messages.
To enable toleration in SMC V1 the receival of CLC proposal messages
is adapted:
* accept larger length values in CLC proposal
* check trailing eye catcher for incoming CLC proposal with V1 length only
* receive the whole CLC proposal even in cases it does not fit into the
V1 buffer
Fixes: e7b7a64a84 ("smc: support variable CLC proposal messages")
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The similar smc_ib_devices spinlock has been converted to a mutex.
Protecting the smcd_dev_list by a mutex is possible as well. This
patch converts the smcd_dev_list spinlock to a mutex.
Fixes: c6ba7c9ba4 ("net/smc: add base infrastructure for SMC-D and ISM")
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tests showed this BUG:
[572555.252867] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:935
[572555.252876] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 131031, name: smcapp
[572555.252879] INFO: lockdep is turned off.
[572555.252883] CPU: 1 PID: 131031 Comm: smcapp Tainted: G O 5.7.0-rc3uschi+ #356
[572555.252885] Hardware name: IBM 3906 M03 703 (LPAR)
[572555.252887] Call Trace:
[572555.252896] [<00000000ac364554>] show_stack+0x94/0xe8
[572555.252901] [<00000000aca1f400>] dump_stack+0xa0/0xe0
[572555.252906] [<00000000ac3c8c10>] ___might_sleep+0x260/0x280
[572555.252910] [<00000000acdc0c98>] __mutex_lock+0x48/0x940
[572555.252912] [<00000000acdc15c2>] mutex_lock_nested+0x32/0x40
[572555.252975] [<000003ff801762d0>] mlx5_lag_get_roce_netdev+0x30/0xc0 [mlx5_core]
[572555.252996] [<000003ff801fb3aa>] mlx5_ib_get_netdev+0x3a/0xe0 [mlx5_ib]
[572555.253007] [<000003ff80063848>] smc_pnet_find_roce_resource+0x1d8/0x310 [smc]
[572555.253011] [<000003ff800602f0>] __smc_connect+0x1f0/0x3e0 [smc]
[572555.253015] [<000003ff80060634>] smc_connect+0x154/0x190 [smc]
[572555.253022] [<00000000acbed8d4>] __sys_connect+0x94/0xd0
[572555.253025] [<00000000acbef620>] __s390x_sys_socketcall+0x170/0x360
[572555.253028] [<00000000acdc6800>] system_call+0x298/0x2b8
[572555.253030] INFO: lockdep is turned off.
Function smc_pnet_find_rdma_dev() might be called from
smc_pnet_find_roce_resource(). It holds the smc_ib_devices list
spinlock while calling infiniband op get_netdev(). At least for mlx5
the get_netdev operation wants mutex serialization, which conflicts
with the smc_ib_devices spinlock.
This patch switches the smc_ib_devices spinlock into a mutex to
allow sleeping when calling get_netdev().
Fixes: a4cf0443c4 ("smc: introduce SMC as an IB-client")
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wait for pending sends only when smc_switch_conns() found a link to move
the connections to. Do not wait during link freeing, this can lead to
permanent hang situations. And refuse to provide a new tx slot on an
unusable link.
Fixes: c6f02ebeea ("net/smc: switch connections to alternate link")
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There might be races in scenarios where both SMC link groups are on the
same system. Prevent that by creating separate wait queues for LLC flows
and messages. Switch to non-interruptable versions of wait_event() and
wake_up() for the llc flow waiter to make sure the waiters get control
sequentially. Fine tune the llc_flow_lock to include the assignment of
the message. Write to system log when an unexpected message was
dropped. And remove an extra indirection and use the existing local
variable lgr in smc_llc_enqueue().
Fixes: 555da9af82 ("net/smc: add event-based llc_flow framework")
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Even with one advertisement monitor in place, the scan policy should use
the whitelist while the system is going to suspend to prevent waking by
random advertisement.
The following test was performed.
- With a paired device, register one advertisement monitor, suspend
the system and verify that the host was not awaken by random
advertisements.
Signed-off-by: Miao-chen Chou <mcchou@chromium.org>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
With the existing implementation of store_rps_map(), packets are queued
in the receive path on the backlog queues of other CPUs irrespective of
whether they are isolated or not. This could add a latency overhead to
any RT workload that is running on the same CPU.
Ensure that store_rps_map() only uses available housekeeping CPUs for
storing the rps_map.
Signed-off-by: Alex Belits <abelits@marvell.com>
Signed-off-by: Nitesh Narayan Lal <nitesh@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200625223443.2684-4-nitesh@redhat.com
While pipes don't really need sb_writers projection, __kernel_write is an
interface better kept private, and the additional rw_verify_area does not
hurt here.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Sometimes it's handy to know when the socket gets freed. In
particular, we'd like to try to use a smarter allocation of
ports for bpf_bind and explore the possibility of limiting
the number of SOCK_DGRAM sockets the process can have.
Implement BPF_CGROUP_INET_SOCK_RELEASE hook that triggers on
inet socket release. It triggers only for userspace sockets
(not in-kernel ones) and therefore has the same semantics as
the existing BPF_CGROUP_INET_SOCK_CREATE.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200706230128.4073544-2-sdf@google.com
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that we have introduced ethtool_phy_ops and the PHY library
dynamically registers its operations with that function pointer, we can
remove the direct PHYLIB dependency in favor of using dynamic
operations.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to decouple ethtool from its PHY library dependency, define an
ethtool_phy_ops singleton which can be overriden by the PHY library when
it loads with an appropriate set of function pointers.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit e57f61858b ("net: bridge: mcast: fix stale nsrcs pointer in
igmp3/mld2 report handling") introduced a bug in the IPv6 header payload
length check which would potentially lead to rejecting a valid MLD2 Report:
The check needs to take into account the 2 bytes for the "Number of
Sources" field in the "Multicast Address Record" before reading it.
And not the size of a pointer to this field.
Fixes: e57f61858b ("net: bridge: mcast: fix stale nsrcs pointer in igmp3/mld2 report handling")
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
When tcf_ct_act execute the tcf_lastuse_update should
be update or the used stats never update
filter protocol ip pref 3 flower chain 0
filter protocol ip pref 3 flower chain 0 handle 0x1
eth_type ipv4
dst_ip 1.1.1.1
ip_flags frag/firstfrag
skip_hw
not_in_hw
action order 1: ct zone 1 nat pipe
index 1 ref 1 bind 1 installed 103 sec used 103 sec
Action statistics:
Sent 151500 bytes 101 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
cookie 4519c04dc64a1a295787aab13b6a50fb
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
The RFC 8684 mandates that no-data DATA FIN packets should carry
a DSS with 0 sequence number and data len equal to 1. Currently,
on FIN retransmission we re-use the existing mapping; if the previous
fin transmission was part of a partially acked data packet, we could
end-up writing in the egress packet a non-compliant DSS.
The above will be detected by a "Bad mapping" warning on the receiver
side.
This change addresses the issue explicitly checking for 0 len packet
when adding the DATA_FIN option.
Fixes: 6d0060f600 ("mptcp: Write MPTCP DSS headers to outgoing data packets")
Reported-by: syzbot+42a07faa5923cfaeb9c9@syzkaller.appspotmail.com
Tested-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IPv4 ping sockets don't set fl4.fl4_icmp_{type,code}, which leads to
incomplete IPsec ACQUIRE messages being sent to userspace. Currently,
both raw sockets and IPv6 ping sockets set those fields.
Expected output of "ip xfrm monitor":
acquire proto esp
sel src 10.0.2.15/32 dst 8.8.8.8/32 proto icmp type 8 code 0 dev ens4
policy src 10.0.2.15/32 dst 8.8.8.8/32
<snip>
Currently with ping sockets:
acquire proto esp
sel src 10.0.2.15/32 dst 8.8.8.8/32 proto icmp type 0 code 0 dev ens4
policy src 10.0.2.15/32 dst 8.8.8.8/32
<snip>
The Libreswan test suite found this problem after Fedora changed the
value for the sysctl net.ipv4.ping_group_range.
Fixes: c319b4d76b ("net: ipv4: add IPPROTO_ICMP socket kind")
Reported-by: Paul Wouters <pwouters@redhat.com>
Tested-by: Paul Wouters <pwouters@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
When we clone a socket in sk_clone_lock(), its sk_cgrp_data is
copied, so the cgroup refcnt must be taken too. And, unlike the
sk_alloc() path, sock_update_netprioidx() is not called here.
Therefore, it is safe and necessary to grab the cgroup refcnt
even when cgroup_sk_alloc is disabled.
sk_clone_lock() is in BH context anyway, the in_interrupt()
would terminate this function if called there. And for sk_alloc()
skcd->val is always zero. So it's safe to factor out the code
to make it more readable.
The global variable 'cgroup_sk_alloc_disabled' is used to determine
whether to take these reference counts. It is impossible to make
the reference counting correct unless we save this bit of information
in skcd->val. So, add a new bit there to record whether the socket
has already taken the reference counts. This obviously relies on
kmalloc() to align cgroup pointers to at least 4 bytes,
ARCH_KMALLOC_MINALIGN is certainly larger than that.
This bug seems to be introduced since the beginning, commit
d979a39d72 ("cgroup: duplicate cgroup reference when cloning sockets")
tried to fix it but not compeletely. It seems not easy to trigger until
the recent commit 090e28b229
("netprio_cgroup: Fix unlimited memory leak of v2 cgroups") was merged.
Fixes: bd1060a1d6 ("sock, cgroup: add sock->sk_cgroup")
Reported-by: Cameron Berkenpas <cam@neo-zeon.de>
Reported-by: Peter Geis <pgwipeout@gmail.com>
Reported-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Reported-by: Daniël Sonck <dsonck92@gmail.com>
Reported-by: Zhang Qiang <qiang.zhang@windriver.com>
Tested-by: Cameron Berkenpas <cam@neo-zeon.de>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Zefan Li <lizefan@huawei.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas reported a regression with IPv6 and anycast using the following
reproducer:
echo 1 > /proc/sys/net/ipv6/conf/all/forwarding
ip -6 a add fc12::1/16 dev lo
sleep 2
echo "pinging lo"
ping6 -c 2 fc12::
The conversion of addrconf_f6i_alloc to use ip6_route_info_create missed
the use of fib6_is_reject which checks addresses added to the loopback
interface and sets the REJECT flag as needed. Update fib6_is_reject for
loopback checks to handle RTF_ANYCAST addresses.
Fixes: c7a1ce397a ("ipv6: Change addrconf_f6i_alloc to use ip6_route_info_create")
Reported-by: thomas.gambier@nexedi.com
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can re-use the existing work queue to handle path management
instead of a dedicated work queue. Just move pm_worker to protocol.c,
call it from the mptcp worker and get rid of the msk lock (already held).
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds an le_simult_central_peripheral features which allows a
clients to determine if the controller is able to support peripheral and
central connections separately and at the same time.
Signed-off-by: Alain Michaud <alainm@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This fixes the kernel oops by removing unnecessary background scan
update from hci_adv_monitors_clear() which shouldn't invoke any work
queue.
The following test was performed.
- Run "rmmod btusb" and verify that no kernel oops is triggered.
Signed-off-by: Miao-chen Chou <mcchou@chromium.org>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: Alain Michaud <alainm@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch fixes active scans to use the configured default parameters.
Signed-off-by: Alain Michaud <alainm@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
In commit 0146dca70b, I incorrectly adapted the code that computes
the location of the UDP or TCP encapsulation header from IPv4 to
IPv6. In esp6_input_done2, skb->transport_header points to the ESP
header, so by adding skb_network_header_len, uh and th will point to
the ESP header, not the encapsulation header that's in front of it.
Since the TCP header's size can change with options, we have to start
from the IPv6 header and walk past possible extensions.
Fixes: 0146dca70b ("xfrm: add support for UDPv6 encapsulation of ESP")
Fixes: 26333c37fc ("xfrm: add IPv6 support for espintcp")
Reported-by: Tobias Brunner <tobias@strongswan.org>
Tested-by: Tobias Brunner <tobias@strongswan.org>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Brian reported a crash in IPv6 code when using rpfilter with a setup
running FRR and external nexthop objects. The root cause of the crash
is fib6_select_path setting fib6_nh in the result to NULL because of
an improper check for nexthop objects.
More specifically, rpfilter invokes ip6_route_lookup with flowi6_oif
set causing fib6_select_path to be called with have_oif_match set.
fib6_select_path has early check on have_oif_match and jumps to the
out label which presumes a builtin fib6_nh. This path is invalid for
nexthop objects; for external nexthops fib6_select_path needs to just
return if the fib6_nh has already been set in the result otherwise it
returns after the call to nexthop_path_fib6_result. Update the check
on have_oif_match to not bail on external nexthops.
Update selftests for this problem.
Fixes: f88d8ea67f ("ipv6: Plumb support for nexthop object in a fib6_info")
Reported-by: Brian Rak <brak@choopa.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
net/dsa/tag_qca.c:48:15: warning: incorrect type in assignment (different base types)
net/dsa/tag_qca.c:48:15: expected unsigned short [usertype]
net/dsa/tag_qca.c:48:15: got restricted __be16 [usertype]
net/dsa/tag_qca.c:68:13: warning: incorrect type in assignment (different base types)
net/dsa/tag_qca.c:68:13: expected restricted __be16 [usertype] hdr
net/dsa/tag_qca.c:68:13: got int
net/dsa/tag_qca.c:71:16: warning: restricted __be16 degrades to integer
net/dsa/tag_qca.c:81:17: warning: restricted __be16 degrades to integer
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net/dsa/tag_mtk.c:84:13: warning: incorrect type in assignment (different base types)
net/dsa/tag_mtk.c:84:13: expected restricted __be16 [usertype] hdr
net/dsa/tag_mtk.c:84:13: got int
net/dsa/tag_mtk.c:94:17: warning: restricted __be16 degrades to integer
The result of a ntohs() is not __be16, but u16.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net/dsa/tag_lan9303.c:76:24: warning: incorrect type in assignment (different base types)
net/dsa/tag_lan9303.c:76:24: expected unsigned short [usertype]
net/dsa/tag_lan9303.c:76:24: got restricted __be16 [usertype]
net/dsa/tag_lan9303.c:80:24: warning: incorrect type in assignment (different base types)
net/dsa/tag_lan9303.c:80:24: expected unsigned short [usertype]
net/dsa/tag_lan9303.c:80:24: got restricted __be16 [usertype]
net/dsa/tag_lan9303.c:106:31: warning: restricted __be16 degrades to integer
net/dsa/tag_lan9303.c:111:24: warning: cast to restricted __be16
net/dsa/tag_lan9303.c:111:24: warning: cast to restricted __be16
net/dsa/tag_lan9303.c:111:24: warning: cast to restricted __be16
net/dsa/tag_lan9303.c:111:24: warning: cast to restricted __be16
Make use of __be16 where appropriate to fix these warnings.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
cpu_to_be16 returns a __be16 value. So what it is assigned to needs to
have the same type to avoid warnings.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net/dsa/slave.c:505:13: warning: incorrect type in initializer (different address spaces)
net/dsa/slave.c:505:13: expected void const [noderef] <asn:3> *__vpp_verify
net/dsa/slave.c:505:13: got struct pcpu_sw_netstats *
Add the needed _percpu property to prevent this warning.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Without this, Opensshd fails to open an ipv6 socket listening
socket:
error: setsockopt IPV6_V6ONLY: Operation not supported
error: Bind to port 22 on :: failed: Address already in use.
Opensshd opens an ipv4 and and ipv6 listening socket, but because
IPV6_V6ONLY setsockopt fails, the port number is already in use.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
This will e.g. make 'sshd restart' work when MPTCP is used, as we will
now set this option on the listener socket instead of only the mptcp
socket (where it has no effect).
We still need to copy the setting to the master socket so that a
subsequent getsockopt() returns the expected value.
Reported-by: Christoph Paasch <cpaasch@apple.com>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
setsockopt(mptcp_fd, SOL_SOCKET, ...)... appears to work (returns 0),
but it has no effect -- this is because the MPTCP layer never has a
chance to copy the settings to the subflow socket.
Skip the generic handling for the mptcp case and instead call the
mptcp specific handler instead for SOL_SOCKET too.
Next patch adds more specific handling for SOL_SOCKET to mptcp.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-07-04
The following pull-request contains BPF updates for your *net-next* tree.
We've added 73 non-merge commits during the last 17 day(s) which contain
a total of 106 files changed, 5233 insertions(+), 1283 deletions(-).
The main changes are:
1) bpftool ability to show PIDs of processes having open file descriptors
for BPF map/program/link/BTF objects, relying on BPF iterator progs
to extract this info efficiently, from Andrii Nakryiko.
2) Addition of BPF iterator progs for dumping TCP and UDP sockets to
seq_files, from Yonghong Song.
3) Support access to BPF map fields in struct bpf_map from programs
through BTF struct access, from Andrey Ignatov.
4) Add a bpf_get_task_stack() helper to be able to dump /proc/*/stack
via seq_file from BPF iterator progs, from Song Liu.
5) Make SO_KEEPALIVE and related options available to bpf_setsockopt()
helper, from Dmitry Yakunin.
6) Optimize BPF sk_storage selection of its caching index, from Martin
KaFai Lau.
7) Removal of redundant synchronize_rcu()s from BPF map destruction which
has been a historic leftover, from Alexei Starovoitov.
8) Several improvements to test_progs to make it easier to create a shell
loop that invokes each test individually which is useful for some CIs,
from Jesper Dangaard Brouer.
9) Fix bpftool prog dump segfault when compiled without skeleton code on
older clang versions, from John Fastabend.
10) Bunch of cleanups and minor improvements, from various others.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Use kvfree() to release vmalloc()'ed areas in ipset, from Eric Dumazet.
2) UAF in nfnetlink_queue from the nf_conntrack_update() path.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Use struct pid instead of user space pid values that are prone to wrap
araound.
In addition track the entire thread group instead of just the first
thread that is started by exec. There are no multi-threaded user mode
drivers today but there is nothing preclucing user drivers from being
multi-threaded, so it is just a good idea to track the entire process.
Take a reference count on the tgid's in question to make it possible
to remove exit_umh in a future change.
As a struct pid is available directly use kill_pid_info.
The prior process signalling code was iffy in using a userspace pid
known to be in the initial pid namespace and then looking up it's task
in whatever the current pid namespace is. It worked only because
kernel threads always run in the initial pid namespace.
As the tgid is now refcounted verify the tgid is NULL at the start of
fork_usermode_driver to avoid the possibility of silent pid leaks.
v1: https://lkml.kernel.org/r/87mu4qdlv2.fsf_-_@x220.int.ebiederm.org
v2: https://lkml.kernel.org/r/a70l4oy8.fsf_-_@x220.int.ebiederm.org
Link: https://lkml.kernel.org/r/20200702164140.4468-12-ebiederm@xmission.com
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Instead of loading a binary blob into a temporary file with
shmem_kernel_file_setup load a binary blob into a temporary tmpfs
filesystem. This means that the blob can be stored in an init section
and discared, and it means the binary blob will have a filename so can
be executed normally.
The only tricky thing about this code is that in the helper function
blob_to_mnt __fput_sync is used. That is because a file can not be
executed if it is still open for write, and the ordinary delayed close
for kernel threads does not happen soon enough, which causes the
following exec to fail. The function umd_load_blob is not called with
any locks so this should be safe.
Executing the blob normally winds up correcting several problems with
the user mode driver code discovered by Tetsuo Handa[1]. By passing
an ordinary filename into the exec, it is no longer necessary to
figure out how to turn a O_RDWR file descriptor into a properly
referende counted O_EXEC file descriptor that forbids all writes. For
path based LSMs there are no new special cases.
[1] https://lore.kernel.org/linux-fsdevel/2a8775b4-1dd5-9d5c-aa42-9872445e0942@i-love.sakura.ne.jp/
v1: https://lkml.kernel.org/r/87d05mf0j9.fsf_-_@x220.int.ebiederm.org
v2: https://lkml.kernel.org/r/87wo3p4p35.fsf_-_@x220.int.ebiederm.org
Link: https://lkml.kernel.org/r/20200702164140.4468-8-ebiederm@xmission.com
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
This new chain flag specifies that:
* the kernel dynamically allocates the chain name, if no chain name
is specified.
* If the immediate expression that refers to this chain is removed,
then this bound chain (and its content) is destroyed.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This enum definition was never exposed through UAPI. Rename
NFT_BASE_CHAIN to NFT_CHAIN_BASE for consistency.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
