If a direct function is hooked along with one of the ftrace registered
functions, then the ftrace_regs_caller is attached to the function that
shares the direct hook as well as the ftrace hook. The ftrace_regs_caller
will call ftrace_ops_list_func() that iterates through all the registered
ftrace callbacks, and if there's a direct callback attached to that
function, the direct ftrace_ops callback is called to notify that
ftrace_regs_caller to return to the direct caller instead of going back to
the function that called it.
But this is a very uncommon case. Currently, the code has it as the default
case. Modify ftrace_regs_caller to make the default case (the non jump) to
just return normally, and have the jump to the handling of the direct
caller.
Link: http://lkml.kernel.org/r/20200422162750.350373278@goodmis.org
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Previously, kernel floating point code would run with the MXCSR control
register value last set by userland code by the thread that was active
on the CPU core just before kernel call. This could affect calculation
results if rounding mode was changed, or a crash if a FPU/SIMD exception
was unmasked.
Restore MXCSR to the kernel's default value.
[ bp: Carve out from a bigger patch by Petteri, add feature check, add
FNINIT call too (amluto). ]
Signed-off-by: Petteri Aimonen <jpa@git.mail.kapsi.fi>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=207979
Link: https://lkml.kernel.org/r/20200624114646.28953-2-bp@alien8.de
* Use the proper length type in the 32-bit truncate() syscall variant,
by Jiri Slaby.
* Reinit IA32_FEAT_CTL during wakeup to fix the case where after
resume, VMXON would #GP due to VMX not being properly enabled, by Sean
Christopherson.
* Fix a static checker warning in the resctrl code, by Dan Carpenter.
* Add a CR4 pinning mask for bits which cannot change after boot, by
Kees Cook.
* Align the start of the loop of __clear_user() to 16 bytes, to improve
performance on AMD zen1 and zen2 microarchitectures, by Matt Fleming.
-----BEGIN PGP SIGNATURE-----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=hxkd
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- AMD Memory bandwidth counter width fix, by Babu Moger.
- Use the proper length type in the 32-bit truncate() syscall variant,
by Jiri Slaby.
- Reinit IA32_FEAT_CTL during wakeup to fix the case where after
resume, VMXON would #GP due to VMX not being properly enabled, by
Sean Christopherson.
- Fix a static checker warning in the resctrl code, by Dan Carpenter.
- Add a CR4 pinning mask for bits which cannot change after boot, by
Kees Cook.
- Align the start of the loop of __clear_user() to 16 bytes, to improve
performance on AMD zen1 and zen2 microarchitectures, by Matt Fleming.
* tag 'x86_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm/64: Align start of __clear_user() loop to 16-bytes
x86/cpu: Use pinning mask for CR4 bits needing to be 0
x86/resctrl: Fix a NULL vs IS_ERR() static checker warning in rdt_cdp_peer_get()
x86/cpu: Reinitialize IA32_FEAT_CTL MSR on BSP during wakeup
syscalls: Fix offset type of ksys_ftruncate()
x86/resctrl: Fix memory bandwidth counter width for AMD
Catch up with upstream, in particular to get c1e8d7c6a7 ("mmap locking
API: convert mmap_sem comments").
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
vmlinux.o: warning: objtool: exc_invalid_op()+0x47: call to probe_kernel_read() leaves .noinstr.text section
Since we use UD2 as a short-cut for 'CALL __WARN', treat it as such.
Have the bare exception handler do the report_bug() thing.
Fixes: 15a416e8aa ("x86/entry: Treat BUG/WARN as NMI-like entries")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200622114713.GE577403@hirez.programming.kicks-ass.net
vmlinux.o: warning: objtool: fixup_bad_iret()+0x8e: call to memcpy() leaves .noinstr.text section
Worse, when KASAN there is no telling what memcpy() actually is. Force
the use of __memcpy() which is our assmebly implementation.
Reported-by: Marco Elver <elver@google.com>
Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Marco Elver <elver@google.com>
Link: https://lkml.kernel.org/r/20200618144801.760070502@infradead.org
Add functionality to disable writing to MSRs from userspace. Writes can
still be allowed by supplying the allow_writes=on module parameter. The
kernel will be tainted so that it shows in oopses.
Having unfettered access to all MSRs on a system is and has always been
a disaster waiting to happen. Think performance counter MSRs, MSRs with
sticky or locked bits, MSRs making major system changes like loading
microcode, MTRRs, PAT configuration, TSC counter, security mitigations
MSRs, you name it.
This also destroys all the kernel's caching of MSR values for
performance, as the recent case with MSR_AMD64_LS_CFG showed.
Another example is writing MSRs by mistake by simply typing the wrong
MSR address. System freezes have been experienced that way.
In general, poking at MSRs under the kernel's feet is a bad bad idea.
So log writing to MSRs by default. Longer term, such writes will be
disabled by default.
If userspace still wants to do that, then proper interfaces should be
defined which are under the kernel's control and accesses to those MSRs
can be synchronized and sanitized properly.
[ Fix sparse warnings. ]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Link: https://lkml.kernel.org/r/20200612105026.GA22660@zn.tnic
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl7x2lwUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPiVAgAn/83Vx/YrF9sr0+TLzukzfOubJVK
Majxb0I06De23VDExiDoZjh5CnCN3kDja0m2c543ZI1XOrHRbp09v1goJQkAgiT0
AQ8Npi1KB71io18SbZtrAhPLmSiUgRirF+XWHB38qjdbZixvZyWz8nvSITFY8aJQ
ICgbm5jftzBdSOKEhqbHwZ+LcXjEGZsehwTiHpUBKUR/kNlRFV5UFAd5m+CT5i4O
3DydLIReATDCoZUKfkBjYtoR3c9DyWESyfWD4GZ/2xRKr/1QfiZ4dA0cd/P9hJYz
7MAG+ULvJGlasSzmcEQJ/X3o9QuIJzpQFpwbKeMX6gOsEsSVUQeriUHIFA==
=jTFw
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"All bugfixes except for a couple cleanup patches"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: VMX: Remove vcpu_vmx's defunct copy of host_pkru
KVM: x86: allow TSC to differ by NTP correction bounds without TSC scaling
KVM: X86: Fix MSR range of APIC registers in X2APIC mode
KVM: VMX: Stop context switching MSR_IA32_UMWAIT_CONTROL
KVM: nVMX: Plumb L2 GPA through to PML emulation
KVM: x86/mmu: Avoid mixing gpa_t with gfn_t in walk_addr_generic()
KVM: LAPIC: ensure APIC map is up to date on concurrent update requests
kvm: lapic: fix broken vcpu hotplug
Revert "KVM: VMX: Micro-optimize vmexit time when not exposing PMU"
KVM: VMX: Add helpers to identify interrupt type from intr_info
kvm/svm: disable KCSAN for svm_vcpu_run()
KVM: MIPS: Fix a build error for !CPU_LOONGSON64
Remove support for context switching between the guest's and host's
desired UMWAIT_CONTROL. Propagating the guest's value to hardware isn't
required for correct functionality, e.g. KVM intercepts reads and writes
to the MSR, and the latency effects of the settings controlled by the
MSR are not architecturally visible.
As a general rule, KVM should not allow the guest to control power
management settings unless explicitly enabled by userspace, e.g. see
KVM_CAP_X86_DISABLE_EXITS. E.g. Intel's SDM explicitly states that C0.2
can improve the performance of SMT siblings. A devious guest could
disable C0.2 so as to improve the performance of their workloads at the
detriment to workloads running in the host or on other VMs.
Wholesale removal of UMWAIT_CONTROL context switching also fixes a race
condition where updates from the host may cause KVM to enter the guest
with the incorrect value. Because updates are are propagated to all
CPUs via IPI (SMP function callback), the value in hardware may be
stale with respect to the cached value and KVM could enter the guest
with the wrong value in hardware. As above, the guest can't observe the
bad value, but it's a weird and confusing wart in the implementation.
Removal also fixes the unnecessary usage of VMX's atomic load/store MSR
lists. Using the lists is only necessary for MSRs that are required for
correct functionality immediately upon VM-Enter/VM-Exit, e.g. EFER on
old hardware, or for MSRs that need to-the-uop precision, e.g. perf
related MSRs. For UMWAIT_CONTROL, the effects are only visible in the
kernel via TPAUSE/delay(), and KVM doesn't do any form of delay in
vcpu_vmx_run(). Using the atomic lists is undesirable as they are more
expensive than direct RDMSR/WRMSR.
Furthermore, even if giving the guest control of the MSR is legitimate,
e.g. in pass-through scenarios, it's not clear that the benefits would
outweigh the overhead. E.g. saving and restoring an MSR across a VMX
roundtrip costs ~250 cycles, and if the guest diverged from the host
that cost would be paid on every run of the guest. In other words, if
there is a legitimate use case then it should be enabled by a new
per-VM capability.
Note, KVM still needs to emulate MSR_IA32_UMWAIT_CONTROL so that it can
correctly expose other WAITPKG features to the guest, e.g. TPAUSE,
UMWAIT and UMONITOR.
Fixes: 6e3ba4abce ("KVM: vmx: Emulate MSR IA32_UMWAIT_CONTROL")
Cc: stable@vger.kernel.org
Cc: Jingqi Liu <jingqi.liu@intel.com>
Cc: Tao Xu <tao3.xu@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200623005135.10414-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This separate helper only existed to guarantee the mutual exclusivity of
CLONE_PIDFD and CLONE_PARENT_SETTID for legacy clone since CLONE_PIDFD
abuses the parent_tid field to return the pidfd. But we can actually handle
this uniformely thus removing the helper. For legacy clone we can detect
that CLONE_PIDFD is specified in conjunction with CLONE_PARENT_SETTID
because they will share the same memory which is invalid and for clone3()
setting the separate pidfd and parent_tid fields to the same memory is
bogus as well. So fold that helper directly into _do_fork() by detecting
this case.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: linux-m68k@lists.linux-m68k.org
Cc: x86@kernel.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
- Have recordmcount work with > 64K sections (to support LTO)
- kprobe RCU fixes
- Correct a kprobe critical section with missing mutex
- Remove redundant arch_disarm_kprobe() call
- Fix lockup when kretprobe triggers within kprobe_flush_task()
- Fix memory leak in fetch_op_data operations
- Fix sleep in atomic in ftrace trace array sample code
- Free up memory on failure in sample trace array code
- Fix incorrect reporting of function_graph fields in format file
- Fix quote within quote parsing in bootconfig
- Fix return value of bootconfig tool
- Add testcases for bootconfig tool
- Fix maybe uninitialized warning in ftrace pid file code
- Remove unused variable in tracing_iter_reset()
- Fix some typos
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXu1jrRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qoCMAP91nOccE3X+Nvc3zET3isDWnl1tWJxk
icsBgN/JwBRuTAD/dnWTHIWM2/5lTiagvyVsmINdJHP6JLr8T7dpN9tlxAQ=
=Cuo7
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Have recordmcount work with > 64K sections (to support LTO)
- kprobe RCU fixes
- Correct a kprobe critical section with missing mutex
- Remove redundant arch_disarm_kprobe() call
- Fix lockup when kretprobe triggers within kprobe_flush_task()
- Fix memory leak in fetch_op_data operations
- Fix sleep in atomic in ftrace trace array sample code
- Free up memory on failure in sample trace array code
- Fix incorrect reporting of function_graph fields in format file
- Fix quote within quote parsing in bootconfig
- Fix return value of bootconfig tool
- Add testcases for bootconfig tool
- Fix maybe uninitialized warning in ftrace pid file code
- Remove unused variable in tracing_iter_reset()
- Fix some typos
* tag 'trace-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Fix maybe-uninitialized compiler warning
tools/bootconfig: Add testcase for show-command and quotes test
tools/bootconfig: Fix to return 0 if succeeded to show the bootconfig
tools/bootconfig: Fix to use correct quotes for value
proc/bootconfig: Fix to use correct quotes for value
tracing: Remove unused event variable in tracing_iter_reset
tracing/probe: Fix memleak in fetch_op_data operations
trace: Fix typo in allocate_ftrace_ops()'s comment
tracing: Make ftrace packed events have align of 1
sample-trace-array: Remove trace_array 'sample-instance'
sample-trace-array: Fix sleeping function called from invalid context
kretprobe: Prevent triggering kretprobe from within kprobe_flush_task
kprobes: Remove redundant arch_disarm_kprobe() call
kprobes: Fix to protect kick_kprobe_optimizer() by kprobe_mutex
kprobes: Use non RCU traversal APIs on kprobe_tables if possible
kprobes: Suppress the suspicious RCU warning on kprobes
recordmcount: support >64k sections
Commit
3e77abda65 ("x86/idt: Consolidate idt functionality")
states that idt_descr could be made static, but it did not actually make
the change. Make it static now.
Fixes: 3e77abda65 ("x86/idt: Consolidate idt functionality")
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200619205103.30873-1-jandryuk@gmail.com
Now that we've renamed probe_kernel_address() to get_kernel_nofault()
and made it look and behave more in line with get_user(), some of the
subtle type behavior differences end up being more obvious and possibly
dangerous.
When you do
get_user(val, user_ptr);
the type of the access comes from the "user_ptr" part, and the above
basically acts as
val = *user_ptr;
by design (except, of course, for the fact that the actual dereference
is done with a user access).
Note how in the above case, the type of the end result comes from the
pointer argument, and then the value is cast to the type of 'val' as
part of the assignment.
So the type of the pointer is ultimately the more important type both
for the access itself.
But 'get_kernel_nofault()' may now _look_ similar, but it behaves very
differently. When you do
get_kernel_nofault(val, kernel_ptr);
it behaves like
val = *(typeof(val) *)kernel_ptr;
except, of course, for the fact that the actual dereference is done with
exception handling so that a faulting access is suppressed and returned
as the error code.
But note how different the casting behavior of the two superficially
similar accesses are: one does the actual access in the size of the type
the pointer points to, while the other does the access in the size of
the target, and ignores the pointer type entirely.
Actually changing get_kernel_nofault() to act like get_user() is almost
certainly the right thing to do eventually, but in the meantime this
patch adds logit to at least verify that the pointer type is compatible
with the type of the result.
In many cases, this involves just casting the pointer to 'void *' to
make it obvious that the type of the pointer is not the important part.
It's not how 'get_user()' acts, but at least the behavioral difference
is now obvious and explicit.
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Better describe what this helper does, and match the naming of
copy_from_kernel_nofault.
Also switch the argument order around, so that it acts and looks
like get_user().
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The kernel needs to explicitly enable FSGSBASE. So, the application needs
to know if it can safely use these instructions. Just looking at the CPUID
bit is not enough because it may be running in a kernel that does not
enable the instructions.
One way for the application would be to just try and catch the SIGILL.
But that is difficult to do in libraries which may not want to overwrite
the signal handlers of the main application.
Enumerate the enabled FSGSBASE capability in bit 1 of AT_HWCAP2 in the ELF
aux vector. AT_HWCAP2 is already used by PPC for similar purposes.
The application can access it open coded or by using the getauxval()
function in newer versions of glibc.
[ tglx: Massaged changelog ]
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1557309753-24073-18-git-send-email-chang.seok.bae@intel.com
Link: https://lkml.kernel.org/r/20200528201402.1708239-14-sashal@kernel.org
Before enabling FSGSBASE the kernel could safely assume that the content
of GS base was a user address. Thus any speculative access as the result
of a mispredicted branch controlling the execution of SWAPGS would be to
a user address. So systems with speculation-proof SMAP did not need to
add additional LFENCE instructions to mitigate.
With FSGSBASE enabled a hostile user can set GS base to a kernel address.
So they can make the kernel speculatively access data they wish to leak
via a side channel. This means that SMAP provides no protection.
Add FSGSBASE as an additional condition to enable the fence-based SWAPGS
mitigation.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200528201402.1708239-9-sashal@kernel.org
When FSGSBASE is enabled, copying threads and reading fsbase and gsbase
using ptrace must read the actual values.
When copying a thread, use save_fsgs() and copy the saved values. For
ptrace, the bases must be read from memory regardless of the selector if
FSGSBASE is enabled.
[ tglx: Invoke __rdgsbase_inactive() with interrupts disabled ]
[ luto: Massage changelog ]
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1557309753-24073-9-git-send-email-chang.seok.bae@intel.com
Link: https://lkml.kernel.org/r/20200528201402.1708239-8-sashal@kernel.org
With the new FSGSBASE instructions, FS and GSABSE can be efficiently read
and writen in __switch_to(). Use that capability to preserve the full
state.
This will enable user code to do whatever it wants with the new
instructions without any kernel-induced gotchas. (There can still be
architectural gotchas: movl %gs,%eax; movl %eax,%gs may change GSBASE if
WRGSBASE was used, but users are expected to read the CPU manual before
doing things like that.)
This is a considerable speedup. It seems to save about 100 cycles
per context switch compared to the baseline 4.6-rc1 behavior on a
Skylake laptop. This is mostly due to avoiding the WRMSR operation.
[ chang: 5~10% performance improvements were seen with a context switch
benchmark that ran threads with different FS/GSBASE values (to the
baseline 4.16). Minor edit on the changelog. ]
[ tglx: Masaage changelog ]
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Link: https://lkml.kernel.org/r/1557309753-24073-8-git-send-email-chang.seok.bae@intel.com
Link: https://lkml.kernel.org/r/20200528201402.1708239-6-sashal@kernel.org
save_fsgs_for_kvm() is invoked via
vcpu_enter_guest()
kvm_x86_ops.prepare_guest_switch(vcpu)
vmx_prepare_switch_to_guest()
save_fsgs_for_kvm()
with preemption disabled, but interrupts enabled.
The upcoming FSGSBASE based GS safe needs interrupts to be disabled. This
could be done in the helper function, but that function is also called from
switch_to() which has interrupts disabled already.
Disable interrupts inside save_fsgs_for_kvm() and rename the function to
current_save_fsgs() so it can be invoked from other places.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200528201402.1708239-7-sashal@kernel.org
Add cpu feature conditional FSGSBASE access to the relevant helper
functions. That allows to accelerate certain FS/GS base operations in
subsequent changes.
Note, that while possible, the user space entry/exit GSBASE operations are
not going to use the new FSGSBASE instructions. The reason is that it would
require additional storage for the user space value which adds more
complexity to the low level code and experiments have shown marginal
benefit. This may be revisited later but for now the SWAPGS based handling
in the entry code is preserved except for the paranoid entry/exit code.
To preserve the SWAPGS entry mechanism introduce __[rd|wr]gsbase_inactive()
helpers. Note, for Xen PV, paravirt hooks can be added later as they might
allow a very efficient but different implementation.
[ tglx: Massaged changelog, convert it to noinstr and force inline
native_swapgs() ]
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1557309753-24073-7-git-send-email-chang.seok.bae@intel.com
Link: https://lkml.kernel.org/r/20200528201402.1708239-5-sashal@kernel.org
This is temporary. It will allow the next few patches to be tested
incrementally.
Setting unsafe_fsgsbase is a root hole. Don't do it.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/1557309753-24073-4-git-send-email-chang.seok.bae@intel.com
Link: https://lkml.kernel.org/r/20200528201402.1708239-3-sashal@kernel.org
When a ptracer writes a ptracee's FS/GSBASE with a different value, the
selector is also cleared. This behavior is not correct as the selector
should be preserved.
Update only the base value and leave the selector intact. To simplify the
code further remove the conditional checking for the same value as this
code is not performance critical.
The only recognizable downside of this change is when the selector is
already nonzero on write. The base will be reloaded according to the
selector. But the case is highly unexpected in real usages.
[ tglx: Massage changelog ]
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/9040CFCD-74BD-4C17-9A01-B9B713CF6B10@intel.com
Link: https://lkml.kernel.org/r/20200528201402.1708239-2-sashal@kernel.org
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.
This code was detected with the help of Coccinelle and, audited and
fixed manually.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20200617211734.GA9636@embeddedor
The idle tasks created for each secondary CPU already have a random stack
canary generated by fork(). Copy the canary to the percpu variable before
starting the secondary CPU which removes the need to call
boot_init_stack_canary().
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200617225624.799335-1-brgerst@gmail.com
The callers don't expect *d_cdp to be set to an error pointer, they only
check for NULL. This leads to a static checker warning:
arch/x86/kernel/cpu/resctrl/rdtgroup.c:2648 __init_one_rdt_domain()
warn: 'd_cdp' could be an error pointer
This would not trigger a bug in this specific case because
__init_one_rdt_domain() calls it with a valid domain that would not have
a negative id and thus not trigger the return of the ERR_PTR(). If this
was a negative domain id then the call to rdt_find_domain() in
domain_add_cpu() would have returned the ERR_PTR() much earlier and the
creation of the domain with an invalid id would have been prevented.
Even though a bug is not triggered currently the right and safe thing to
do is to set the pointer to NULL because that is what can be checked for
when the caller is handling the CDP and non-CDP cases.
Fixes: 52eb74339a ("x86/resctrl: Fix rdt_find_domain() return value and checks")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Acked-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lkml.kernel.org/r/20200602193611.GA190851@mwanda
Ziqian reported lockup when adding retprobe on _raw_spin_lock_irqsave.
My test was also able to trigger lockdep output:
============================================
WARNING: possible recursive locking detected
5.6.0-rc6+ #6 Not tainted
--------------------------------------------
sched-messaging/2767 is trying to acquire lock:
ffffffff9a492798 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_hash_lock+0x52/0xa0
but task is already holding lock:
ffffffff9a491a18 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_trampoline+0x0/0x50
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&(kretprobe_table_locks[i].lock));
lock(&(kretprobe_table_locks[i].lock));
*** DEADLOCK ***
May be due to missing lock nesting notation
1 lock held by sched-messaging/2767:
#0: ffffffff9a491a18 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_trampoline+0x0/0x50
stack backtrace:
CPU: 3 PID: 2767 Comm: sched-messaging Not tainted 5.6.0-rc6+ #6
Call Trace:
dump_stack+0x96/0xe0
__lock_acquire.cold.57+0x173/0x2b7
? native_queued_spin_lock_slowpath+0x42b/0x9e0
? lockdep_hardirqs_on+0x590/0x590
? __lock_acquire+0xf63/0x4030
lock_acquire+0x15a/0x3d0
? kretprobe_hash_lock+0x52/0xa0
_raw_spin_lock_irqsave+0x36/0x70
? kretprobe_hash_lock+0x52/0xa0
kretprobe_hash_lock+0x52/0xa0
trampoline_handler+0xf8/0x940
? kprobe_fault_handler+0x380/0x380
? find_held_lock+0x3a/0x1c0
kretprobe_trampoline+0x25/0x50
? lock_acquired+0x392/0xbc0
? _raw_spin_lock_irqsave+0x50/0x70
? __get_valid_kprobe+0x1f0/0x1f0
? _raw_spin_unlock_irqrestore+0x3b/0x40
? finish_task_switch+0x4b9/0x6d0
? __switch_to_asm+0x34/0x70
? __switch_to_asm+0x40/0x70
The code within the kretprobe handler checks for probe reentrancy,
so we won't trigger any _raw_spin_lock_irqsave probe in there.
The problem is in outside kprobe_flush_task, where we call:
kprobe_flush_task
kretprobe_table_lock
raw_spin_lock_irqsave
_raw_spin_lock_irqsave
where _raw_spin_lock_irqsave triggers the kretprobe and installs
kretprobe_trampoline handler on _raw_spin_lock_irqsave return.
The kretprobe_trampoline handler is then executed with already
locked kretprobe_table_locks, and first thing it does is to
lock kretprobe_table_locks ;-) the whole lockup path like:
kprobe_flush_task
kretprobe_table_lock
raw_spin_lock_irqsave
_raw_spin_lock_irqsave ---> probe triggered, kretprobe_trampoline installed
---> kretprobe_table_locks locked
kretprobe_trampoline
trampoline_handler
kretprobe_hash_lock(current, &head, &flags); <--- deadlock
Adding kprobe_busy_begin/end helpers that mark code with fake
probe installed to prevent triggering of another kprobe within
this code.
Using these helpers in kprobe_flush_task, so the probe recursion
protection check is hit and the probe is never set to prevent
above lockup.
Link: http://lkml.kernel.org/r/158927059835.27680.7011202830041561604.stgit@devnote2
Fixes: ef53d9c5e4 ("kprobes: improve kretprobe scalability with hashed locking")
Cc: Ingo Molnar <mingo@kernel.org>
Cc: "Gustavo A . R . Silva" <gustavoars@kernel.org>
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: "Naveen N . Rao" <naveen.n.rao@linux.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Reported-by: "Ziqian SUN (Zamir)" <zsun@redhat.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Merge the test whether the CPU supports STIBP into the test which
determines whether STIBP is required. Thus try to simplify what is
already an insane logic.
Remove a superfluous newline in a comment, while at it.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Anthony Steinhauser <asteinhauser@google.com>
Link: https://lkml.kernel.org/r/20200615065806.GB14668@zn.tnic
Reinitialize IA32_FEAT_CTL on the BSP during wakeup to handle the case
where firmware doesn't initialize or save/restore across S3. This fixes
a bug where IA32_FEAT_CTL is left uninitialized and results in VMXON
taking a #GP due to VMX not being fully enabled, i.e. breaks KVM.
Use init_ia32_feat_ctl() to "restore" IA32_FEAT_CTL as it already deals
with the case where the MSR is locked, and because APs already redo
init_ia32_feat_ctl() during suspend by virtue of the SMP boot flow being
used to reinitialize APs upon wakeup. Do the call in the early wakeup
flow to avoid dependencies in the syscore_ops chain, e.g. simply adding
a resume hook is not guaranteed to work, as KVM does VMXON in its own
resume hook, kvm_resume(), when KVM has active guests.
Fixes: 21bd3467a5 ("KVM: VMX: Drop initialization of IA32_FEAT_CTL MSR")
Reported-by: Brad Campbell <lists2009@fnarfbargle.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Tested-by: Brad Campbell <lists2009@fnarfbargle.com>
Cc: stable@vger.kernel.org # v5.6
Link: https://lkml.kernel.org/r/20200608174134.11157-1-sean.j.christopherson@intel.com
Be defensive against the case where the processor reports a base_freq
larger than turbo_freq (the ratio would be zero).
Fixes: 1567c3e346 ("x86, sched: Add support for frequency invariance")
Signed-off-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lkml.kernel.org/r/20200531182453.15254-4-ggherdovich@suse.cz
There may be CPUs that support turbo boost but don't declare any turbo
ratio, i.e. their MSR_TURBO_RATIO_LIMIT is all zeroes. In that condition
scale-invariant calculations can't be performed.
Fixes: 1567c3e346 ("x86, sched: Add support for frequency invariance")
Suggested-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Link: https://lkml.kernel.org/r/20200531182453.15254-3-ggherdovich@suse.cz
The product mcnt * arch_max_freq_ratio can overflows u64.
For context, a large value for arch_max_freq_ratio would be 5000,
corresponding to a turbo_freq/base_freq ratio of 5 (normally it's more like
1500-2000). A large increment frequency for the MPERF counter would be 5GHz
(the base clock of all CPUs on the market today is less than that). With
these figures, a CPU would need to go without a scheduler tick for around 8
days for the u64 overflow to happen. It is unlikely, but the check is
warranted.
Under similar conditions, the difference acnt of two consecutive APERF
readings can overflow as well.
In these circumstances is appropriate to disable frequency invariant
accounting: the feature relies on measures of the clock frequency done at
every scheduler tick, which need to be "fresh" to be at all meaningful.
A note on i386: prior to version 5.1, the GCC compiler didn't have the
builtin function __builtin_mul_overflow. In these GCC versions the macro
check_mul_overflow needs __udivdi3() to do (u64)a/b, which the kernel
doesn't provide. For this reason this change fails to build on i386 if
GCC<5.1, and we protect the entire frequency invariant code behind
CONFIG_X86_64 (special thanks to "kbuild test robot" <lkp@intel.com>).
Fixes: 1567c3e346 ("x86, sched: Add support for frequency invariance")
Signed-off-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lkml.kernel.org/r/20200531182453.15254-2-ggherdovich@suse.cz
Add perf text poke events for kprobes. That includes:
- the replaced instruction(s) which are executed out-of-line
i.e. arch_copy_kprobe() and arch_remove_kprobe()
- the INT3 that activates the kprobe
i.e. arch_arm_kprobe() and arch_disarm_kprobe()
- optimised kprobe function
i.e. arch_prepare_optimized_kprobe() and
__arch_remove_optimized_kprobe()
- optimised kprobe
i.e. arch_optimize_kprobes() and arch_unoptimize_kprobe()
Resulting in 8 possible text_poke events:
0: NULL -> probe.ainsn.insn (if ainsn.boostable && !kp.post_handler)
arch_copy_kprobe()
1: old0 -> INT3 arch_arm_kprobe()
// boosted kprobe active
2: NULL -> optprobe_trampoline arch_prepare_optimized_kprobe()
3: INT3,old1,old2,old3,old4 -> JMP32 arch_optimize_kprobes()
// optprobe active
4: JMP32 -> INT3,old1,old2,old3,old4
// optprobe disabled and kprobe active (this sometimes goes back to 3)
arch_unoptimize_kprobe()
5: optprobe_trampoline -> NULL arch_remove_optimized_kprobe()
// boosted kprobe active
6: INT3 -> old0 arch_disarm_kprobe()
7: probe.ainsn.insn -> NULL (if ainsn.boostable && !kp.post_handler)
arch_remove_kprobe()
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lkml.kernel.org/r/20200512121922.8997-6-adrian.hunter@intel.com
Add support for perf text poke event for text_poke_bp_batch() callers. That
includes jump labels. See comments for more details.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200512121922.8997-3-adrian.hunter@intel.com
KVM now supports using interrupt for 'page ready' APF event delivery and
legacy mechanism was deprecated. Switch KVM guests to the new one.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200525144125.143875-9-vkuznets@redhat.com>
[Use HYPERVISOR_CALLBACK_VECTOR instead of a separate vector. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The original code is a nop as i_mce.status is or'ed with part of itself,
fix it.
Fixes: a1300e5052 ("x86/ras/mce_amd_inj: Trigger deferred and thresholding errors interrupts")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Yazen Ghannam <yazen.ghannam@amd.com>
Link: https://lkml.kernel.org/r/20200611023238.3830-1-zhenzhong.duan@gmail.com
The x86 microcode support works just fine without FW_LOADER. In fact,
these days most people load microcode early during boot so FW_LOADER
never gets into the picture anyway.
As almost everyone on x86 needs to enable MICROCODE, this by extension
means that FW_LOADER is always built into the kernel even if nothing
uses it. The FW_LOADER system is about two thousand lines long and
contains user-space facing interfaces that could potentially provide an
entry point into the kernel (or beyond).
Remove the unnecessary select of FW_LOADER by MICROCODE. People who need
the FW_LOADER capability can still enable it.
[ bp: Massage a bit. ]
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200610042911.GA20058@gondor.apana.org.au
Memory bandwidth is calculated reading the monitoring counter
at two intervals and calculating the delta. It is the software’s
responsibility to read the count often enough to avoid having
the count roll over _twice_ between reads.
The current code hardcodes the bandwidth monitoring counter's width
to 24 bits for AMD. This is due to default base counter width which
is 24. Currently, AMD does not implement the CPUID 0xF.[ECX=1]:EAX
to adjust the counter width. But, the AMD hardware supports much
wider bandwidth counter with the default width of 44 bits.
Kernel reads these monitoring counters every 1 second and adjusts the
counter value for overflow. With 24 bits and scale value of 64 for AMD,
it can only measure up to 1GB/s without overflowing. For the rates
above 1GB/s this will fail to measure the bandwidth.
Fix the issue setting the default width to 44 bits by adjusting the
offset.
AMD future products will implement CPUID 0xF.[ECX=1]:EAX.
[ bp: Let the line stick out and drop {}-brackets around a single
statement. ]
Fixes: 4d05bf71f1 ("x86/resctrl: Introduce AMD QOS feature")
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/159129975546.62538.5656031125604254041.stgit@naples-babu.amd.com
* Unmap a whole guest page if an MCE is encountered in it to avoid
follow-on MCEs leading to the guest crashing, by Tony Luck.
This change collided with the entry changes and the merge resolution
would have been rather unpleasant. To avoid that the entry branch was
merged in before applying this. The resulting code did not change
over the rebase.
* AMD MCE error thresholding machinery cleanup and hotplug sanitization, by
Thomas Gleixner.
* Change the MCE notifiers to denote whether they have handled the error
and not break the chain early by returning NOTIFY_STOP, thus giving the
opportunity for the later handlers in the chain to see it. By Tony Luck.
* Add AMD family 0x17, models 0x60-6f support, by Alexander Monakov.
* Last but not least, the usual round of fixes and improvements.
-----BEGIN PGP SIGNATURE-----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=iWiy
-----END PGP SIGNATURE-----
Merge tag 'ras-core-2020-06-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 RAS updates from Thomas Gleixner:
"RAS updates from Borislav Petkov:
- Unmap a whole guest page if an MCE is encountered in it to avoid
follow-on MCEs leading to the guest crashing, by Tony Luck.
This change collided with the entry changes and the merge
resolution would have been rather unpleasant. To avoid that the
entry branch was merged in before applying this. The resulting code
did not change over the rebase.
- AMD MCE error thresholding machinery cleanup and hotplug
sanitization, by Thomas Gleixner.
- Change the MCE notifiers to denote whether they have handled the
error and not break the chain early by returning NOTIFY_STOP, thus
giving the opportunity for the later handlers in the chain to see
it. By Tony Luck.
- Add AMD family 0x17, models 0x60-6f support, by Alexander Monakov.
- Last but not least, the usual round of fixes and improvements"
* tag 'ras-core-2020-06-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
x86/mce/dev-mcelog: Fix -Wstringop-truncation warning about strncpy()
x86/{mce,mm}: Unmap the entire page if the whole page is affected and poisoned
EDAC/amd64: Add AMD family 17h model 60h PCI IDs
hwmon: (k10temp) Add AMD family 17h model 60h PCI match
x86/amd_nb: Add AMD family 17h model 60h PCI IDs
x86/mcelog: Add compat_ioctl for 32-bit mcelog support
x86/mce: Drop bogus comment about mce.kflags
x86/mce: Fixup exception only for the correct MCEs
EDAC: Drop the EDAC report status checks
x86/mce: Add mce=print_all option
x86/mce: Change default MCE logger to check mce->kflags
x86/mce: Fix all mce notifiers to update the mce->kflags bitmask
x86/mce: Add a struct mce.kflags field
x86/mce: Convert the CEC to use the MCE notifier
x86/mce: Rename "first" function as "early"
x86/mce/amd, edac: Remove report_gart_errors
x86/mce/amd: Make threshold bank setting hotplug robust
x86/mce/amd: Cleanup threshold device remove path
x86/mce/amd: Straighten CPU hotplug path
x86/mce/amd: Sanitize thresholding device creation hotplug path
...
This all started about 6 month ago with the attempt to move the Posix CPU
timer heavy lifting out of the timer interrupt code and just have lockless
quick checks in that code path. Trivial 5 patches.
This unearthed an inconsistency in the KVM handling of task work and the
review requested to move all of this into generic code so other
architectures can share.
Valid request and solved with another 25 patches but those unearthed
inconsistencies vs. RCU and instrumentation.
Digging into this made it obvious that there are quite some inconsistencies
vs. instrumentation in general. The int3 text poke handling in particular
was completely unprotected and with the batched update of trace events even
more likely to expose to endless int3 recursion.
In parallel the RCU implications of instrumenting fragile entry code came
up in several discussions.
The conclusion of the X86 maintainer team was to go all the way and make
the protection against any form of instrumentation of fragile and dangerous
code pathes enforcable and verifiable by tooling.
A first batch of preparatory work hit mainline with commit d5f744f9a2.
The (almost) full solution introduced a new code section '.noinstr.text'
into which all code which needs to be protected from instrumentation of all
sorts goes into. Any call into instrumentable code out of this section has
to be annotated. objtool has support to validate this. Kprobes now excludes
this section fully which also prevents BPF from fiddling with it and all
'noinstr' annotated functions also keep ftrace off. The section, kprobes
and objtool changes are already merged.
The major changes coming with this are:
- Preparatory cleanups
- Annotating of relevant functions to move them into the noinstr.text
section or enforcing inlining by marking them __always_inline so the
compiler cannot misplace or instrument them.
- Splitting and simplifying the idtentry macro maze so that it is now
clearly separated into simple exception entries and the more
interesting ones which use interrupt stacks and have the paranoid
handling vs. CR3 and GS.
- Move quite some of the low level ASM functionality into C code:
- enter_from and exit to user space handling. The ASM code now calls
into C after doing the really necessary ASM handling and the return
path goes back out without bells and whistels in ASM.
- exception entry/exit got the equivivalent treatment
- move all IRQ tracepoints from ASM to C so they can be placed as
appropriate which is especially important for the int3 recursion
issue.
- Consolidate the declaration and definition of entry points between 32
and 64 bit. They share a common header and macros now.
- Remove the extra device interrupt entry maze and just use the regular
exception entry code.
- All ASM entry points except NMI are now generated from the shared header
file and the corresponding macros in the 32 and 64 bit entry ASM.
- The C code entry points are consolidated as well with the help of
DEFINE_IDTENTRY*() macros. This allows to ensure at one central point
that all corresponding entry points share the same semantics. The
actual function body for most entry points is in an instrumentable
and sane state.
There are special macros for the more sensitive entry points,
e.g. INT3 and of course the nasty paranoid #NMI, #MCE, #DB and #DF.
They allow to put the whole entry instrumentation and RCU handling
into safe places instead of the previous pray that it is correct
approach.
- The INT3 text poke handling is now completely isolated and the
recursion issue banned. Aside of the entry rework this required other
isolation work, e.g. the ability to force inline bsearch.
- Prevent #DB on fragile entry code, entry relevant memory and disable
it on NMI, #MC entry, which allowed to get rid of the nested #DB IST
stack shifting hackery.
- A few other cleanups and enhancements which have been made possible
through this and already merged changes, e.g. consolidating and
further restricting the IDT code so the IDT table becomes RO after
init which removes yet another popular attack vector
- About 680 lines of ASM maze are gone.
There are a few open issues:
- An escape out of the noinstr section in the MCE handler which needs
some more thought but under the aspect that MCE is a complete
trainwreck by design and the propability to survive it is low, this was
not high on the priority list.
- Paravirtualization
When PV is enabled then objtool complains about a bunch of indirect
calls out of the noinstr section. There are a few straight forward
ways to fix this, but the other issues vs. general correctness were
more pressing than parawitz.
- KVM
KVM is inconsistent as well. Patches have been posted, but they have
not yet been commented on or picked up by the KVM folks.
- IDLE
Pretty much the same problems can be found in the low level idle code
especially the parts where RCU stopped watching. This was beyond the
scope of the more obvious and exposable problems and is on the todo
list.
The lesson learned from this brain melting exercise to morph the evolved
code base into something which can be validated and understood is that once
again the violation of the most important engineering principle
"correctness first" has caused quite a few people to spend valuable time on
problems which could have been avoided in the first place. The "features
first" tinkering mindset really has to stop.
With that I want to say thanks to everyone involved in contributing to this
effort. Special thanks go to the following people (alphabetical order):
Alexandre Chartre
Andy Lutomirski
Borislav Petkov
Brian Gerst
Frederic Weisbecker
Josh Poimboeuf
Juergen Gross
Lai Jiangshan
Macro Elver
Paolo Bonzini
Paul McKenney
Peter Zijlstra
Vitaly Kuznetsov
Will Deacon
-----BEGIN PGP SIGNATURE-----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=llba
-----END PGP SIGNATURE-----
Merge tag 'x86-entry-2020-06-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 entry updates from Thomas Gleixner:
"The x86 entry, exception and interrupt code rework
This all started about 6 month ago with the attempt to move the Posix
CPU timer heavy lifting out of the timer interrupt code and just have
lockless quick checks in that code path. Trivial 5 patches.
This unearthed an inconsistency in the KVM handling of task work and
the review requested to move all of this into generic code so other
architectures can share.
Valid request and solved with another 25 patches but those unearthed
inconsistencies vs. RCU and instrumentation.
Digging into this made it obvious that there are quite some
inconsistencies vs. instrumentation in general. The int3 text poke
handling in particular was completely unprotected and with the batched
update of trace events even more likely to expose to endless int3
recursion.
In parallel the RCU implications of instrumenting fragile entry code
came up in several discussions.
The conclusion of the x86 maintainer team was to go all the way and
make the protection against any form of instrumentation of fragile and
dangerous code pathes enforcable and verifiable by tooling.
A first batch of preparatory work hit mainline with commit
d5f744f9a2 ("Pull x86 entry code updates from Thomas Gleixner")
That (almost) full solution introduced a new code section
'.noinstr.text' into which all code which needs to be protected from
instrumentation of all sorts goes into. Any call into instrumentable
code out of this section has to be annotated. objtool has support to
validate this.
Kprobes now excludes this section fully which also prevents BPF from
fiddling with it and all 'noinstr' annotated functions also keep
ftrace off. The section, kprobes and objtool changes are already
merged.
The major changes coming with this are:
- Preparatory cleanups
- Annotating of relevant functions to move them into the
noinstr.text section or enforcing inlining by marking them
__always_inline so the compiler cannot misplace or instrument
them.
- Splitting and simplifying the idtentry macro maze so that it is
now clearly separated into simple exception entries and the more
interesting ones which use interrupt stacks and have the paranoid
handling vs. CR3 and GS.
- Move quite some of the low level ASM functionality into C code:
- enter_from and exit to user space handling. The ASM code now
calls into C after doing the really necessary ASM handling and
the return path goes back out without bells and whistels in
ASM.
- exception entry/exit got the equivivalent treatment
- move all IRQ tracepoints from ASM to C so they can be placed as
appropriate which is especially important for the int3
recursion issue.
- Consolidate the declaration and definition of entry points between
32 and 64 bit. They share a common header and macros now.
- Remove the extra device interrupt entry maze and just use the
regular exception entry code.
- All ASM entry points except NMI are now generated from the shared
header file and the corresponding macros in the 32 and 64 bit
entry ASM.
- The C code entry points are consolidated as well with the help of
DEFINE_IDTENTRY*() macros. This allows to ensure at one central
point that all corresponding entry points share the same
semantics. The actual function body for most entry points is in an
instrumentable and sane state.
There are special macros for the more sensitive entry points, e.g.
INT3 and of course the nasty paranoid #NMI, #MCE, #DB and #DF.
They allow to put the whole entry instrumentation and RCU handling
into safe places instead of the previous pray that it is correct
approach.
- The INT3 text poke handling is now completely isolated and the
recursion issue banned. Aside of the entry rework this required
other isolation work, e.g. the ability to force inline bsearch.
- Prevent #DB on fragile entry code, entry relevant memory and
disable it on NMI, #MC entry, which allowed to get rid of the
nested #DB IST stack shifting hackery.
- A few other cleanups and enhancements which have been made
possible through this and already merged changes, e.g.
consolidating and further restricting the IDT code so the IDT
table becomes RO after init which removes yet another popular
attack vector
- About 680 lines of ASM maze are gone.
There are a few open issues:
- An escape out of the noinstr section in the MCE handler which needs
some more thought but under the aspect that MCE is a complete
trainwreck by design and the propability to survive it is low, this
was not high on the priority list.
- Paravirtualization
When PV is enabled then objtool complains about a bunch of indirect
calls out of the noinstr section. There are a few straight forward
ways to fix this, but the other issues vs. general correctness were
more pressing than parawitz.
- KVM
KVM is inconsistent as well. Patches have been posted, but they
have not yet been commented on or picked up by the KVM folks.
- IDLE
Pretty much the same problems can be found in the low level idle
code especially the parts where RCU stopped watching. This was
beyond the scope of the more obvious and exposable problems and is
on the todo list.
The lesson learned from this brain melting exercise to morph the
evolved code base into something which can be validated and understood
is that once again the violation of the most important engineering
principle "correctness first" has caused quite a few people to spend
valuable time on problems which could have been avoided in the first
place. The "features first" tinkering mindset really has to stop.
With that I want to say thanks to everyone involved in contributing to
this effort. Special thanks go to the following people (alphabetical
order): Alexandre Chartre, Andy Lutomirski, Borislav Petkov, Brian
Gerst, Frederic Weisbecker, Josh Poimboeuf, Juergen Gross, Lai
Jiangshan, Macro Elver, Paolo Bonzin,i Paul McKenney, Peter Zijlstra,
Vitaly Kuznetsov, and Will Deacon"
* tag 'x86-entry-2020-06-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (142 commits)
x86/entry: Force rcu_irq_enter() when in idle task
x86/entry: Make NMI use IDTENTRY_RAW
x86/entry: Treat BUG/WARN as NMI-like entries
x86/entry: Unbreak __irqentry_text_start/end magic
x86/entry: __always_inline CR2 for noinstr
lockdep: __always_inline more for noinstr
x86/entry: Re-order #DB handler to avoid *SAN instrumentation
x86/entry: __always_inline arch_atomic_* for noinstr
x86/entry: __always_inline irqflags for noinstr
x86/entry: __always_inline debugreg for noinstr
x86/idt: Consolidate idt functionality
x86/idt: Cleanup trap_init()
x86/idt: Use proper constants for table size
x86/idt: Add comments about early #PF handling
x86/idt: Mark init only functions __init
x86/entry: Rename trace_hardirqs_off_prepare()
x86/entry: Clarify irq_{enter,exit}_rcu()
x86/entry: Remove DBn stacks
x86/entry: Remove debug IDT frobbing
x86/entry: Optimize local_db_save() for virt
...
- Loongson port
PPC:
- Fixes
ARM:
- Fixes
x86:
- KVM_SET_USER_MEMORY_REGION optimizations
- Fixes
- Selftest fixes
The guest side of the asynchronous page fault work has been delayed to 5.9
in order to sync with Thomas's interrupt entry rework.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl7icj4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPHGQgAj9+5j+f5v06iMP/+ponWwsVfh+5/
UR1gPbpMSFMKF0U+BCFxsBeGKWPDiz9QXaLfy6UGfOFYBI475Su5SoZ8/i/o6a2V
QjcKIJxBRNs66IG/774pIpONY8/mm/3b6vxmQktyBTqjb6XMGlOwoGZixj/RTp85
+uwSICxMlrijg+fhFMwC4Bo/8SFg+FeBVbwR07my88JaLj+3cV/NPolG900qLSa6
uPqJ289EQ86LrHIHXCEWRKYvwy77GFsmBYjKZH8yXpdzUlSGNexV8eIMAz50figu
wYRJGmHrRqwuzFwEGknv8SA3s2HVggXO4WVkWWCeJyO8nIVfYFUhME5l6Q==
=+Hh0
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more KVM updates from Paolo Bonzini:
"The guest side of the asynchronous page fault work has been delayed to
5.9 in order to sync with Thomas's interrupt entry rework, but here's
the rest of the KVM updates for this merge window.
MIPS:
- Loongson port
PPC:
- Fixes
ARM:
- Fixes
x86:
- KVM_SET_USER_MEMORY_REGION optimizations
- Fixes
- Selftest fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (62 commits)
KVM: x86: do not pass poisoned hva to __kvm_set_memory_region
KVM: selftests: fix sync_with_host() in smm_test
KVM: async_pf: Inject 'page ready' event only if 'page not present' was previously injected
KVM: async_pf: Cleanup kvm_setup_async_pf()
kvm: i8254: remove redundant assignment to pointer s
KVM: x86: respect singlestep when emulating instruction
KVM: selftests: Don't probe KVM_CAP_HYPERV_ENLIGHTENED_VMCS when nested VMX is unsupported
KVM: selftests: do not substitute SVM/VMX check with KVM_CAP_NESTED_STATE check
KVM: nVMX: Consult only the "basic" exit reason when routing nested exit
KVM: arm64: Move hyp_symbol_addr() to kvm_asm.h
KVM: arm64: Synchronize sysreg state on injecting an AArch32 exception
KVM: arm64: Make vcpu_cp1x() work on Big Endian hosts
KVM: arm64: Remove host_cpu_context member from vcpu structure
KVM: arm64: Stop sparse from moaning at __hyp_this_cpu_ptr
KVM: arm64: Handle PtrAuth traps early
KVM: x86: Unexport x86_fpu_cache and make it static
KVM: selftests: Ignore KVM 5-level paging support for VM_MODE_PXXV48_4K
KVM: arm64: Save the host's PtrAuth keys in non-preemptible context
KVM: arm64: Stop save/restoring ACTLR_EL1
KVM: arm64: Add emulation for 32bit guests accessing ACTLR2
...
For no reason other than beginning brainmelt, IDTENTRY_NMI was mapped to
IDTENTRY_IST.
This is not a problem on 64bit because the IST default entry point maps to
IDTENTRY_RAW which does not any entry handling. The surplus function
declaration for the noist C entry point is unused and as there is no ASM
code emitted for NMI this went unnoticed.
On 32bit IDTENTRY_IST maps to a regular IDTENTRY which does the normal
entry handling. That is clearly the wrong thing to do for NMI.
Map it to IDTENTRY_RAW to unbreak it. The IDTENTRY_NMI mapping needs to
stay to avoid emitting ASM code.
Fixes: 6271fef00b ("x86/entry: Convert NMI to IDTENTRY_NMI")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Debugged-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/CA+G9fYvF3cyrY+-iw_SZtpN-i2qA2BruHg4M=QYECU2-dNdsMw@mail.gmail.com
BUG/WARN are cleverly optimized using UD2 to handle the BUG/WARN out of
line in an exception fixup.
But if BUG or WARN is issued in a funny RCU context, then the
idtentry_enter...() path might helpfully WARN that the RCU context is
invalid, which results in infinite recursion.
Split the BUG/WARN handling into an nmi_enter()/nmi_exit() path in
exc_invalid_op() to increase the chance to survive the experience.
[ tglx: Make the declaration match the implementation ]
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/f8fe40e0088749734b4435b554f73eee53dcf7a8.1591932307.git.luto@kernel.org
KCSAN is a dynamic race detector, which relies on compile-time
instrumentation, and uses a watchpoint-based sampling approach to detect
races.
The feature was under development for quite some time and has already found
legitimate bugs.
Unfortunately it comes with a limitation, which was only understood late in
the development cycle:
It requires an up to date CLANG-11 compiler
CLANG-11 is not yet released (scheduled for June), but it's the only
compiler today which handles the kernel requirements and especially the
annotations of functions to exclude them from KCSAN instrumentation
correctly.
These annotations really need to work so that low level entry code and
especially int3 text poke handling can be completely isolated.
A detailed discussion of the requirements and compiler issues can be found
here:
https://lore.kernel.org/lkml/CANpmjNMTsY_8241bS7=XAfqvZHFLrVEkv_uM4aDUWE_kh3Rvbw@mail.gmail.com/
We came to the conclusion that trying to work around compiler limitations
and bugs again would end up in a major trainwreck, so requiring a working
compiler seemed to be the best choice.
For Continous Integration purposes the compiler restriction is manageable
and that's where most xxSAN reports come from.
For a change this limitation might make GCC people actually look at their
bugs. Some issues with CSAN in GCC are 7 years old and one has been 'fixed'
3 years ago with a half baken solution which 'solved' the reported issue
but not the underlying problem.
The KCSAN developers also ponder to use a GCC plugin to become independent,
but that's not something which will show up in a few days.
Blocking KCSAN until wide spread compiler support is available is not a
really good alternative because the continuous growth of lockless
optimizations in the kernel demands proper tooling support.
-----BEGIN PGP SIGNATURE-----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=iplm
-----END PGP SIGNATURE-----
Merge tag 'locking-kcsan-2020-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull the Kernel Concurrency Sanitizer from Thomas Gleixner:
"The Kernel Concurrency Sanitizer (KCSAN) is a dynamic race detector,
which relies on compile-time instrumentation, and uses a
watchpoint-based sampling approach to detect races.
The feature was under development for quite some time and has already
found legitimate bugs.
Unfortunately it comes with a limitation, which was only understood
late in the development cycle:
It requires an up to date CLANG-11 compiler
CLANG-11 is not yet released (scheduled for June), but it's the only
compiler today which handles the kernel requirements and especially
the annotations of functions to exclude them from KCSAN
instrumentation correctly.
These annotations really need to work so that low level entry code and
especially int3 text poke handling can be completely isolated.
A detailed discussion of the requirements and compiler issues can be
found here:
https://lore.kernel.org/lkml/CANpmjNMTsY_8241bS7=XAfqvZHFLrVEkv_uM4aDUWE_kh3Rvbw@mail.gmail.com/
We came to the conclusion that trying to work around compiler
limitations and bugs again would end up in a major trainwreck, so
requiring a working compiler seemed to be the best choice.
For Continous Integration purposes the compiler restriction is
manageable and that's where most xxSAN reports come from.
For a change this limitation might make GCC people actually look at
their bugs. Some issues with CSAN in GCC are 7 years old and one has
been 'fixed' 3 years ago with a half baken solution which 'solved' the
reported issue but not the underlying problem.
The KCSAN developers also ponder to use a GCC plugin to become
independent, but that's not something which will show up in a few
days.
Blocking KCSAN until wide spread compiler support is available is not
a really good alternative because the continuous growth of lockless
optimizations in the kernel demands proper tooling support"
* tag 'locking-kcsan-2020-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (76 commits)
compiler_types.h, kasan: Use __SANITIZE_ADDRESS__ instead of CONFIG_KASAN to decide inlining
compiler.h: Move function attributes to compiler_types.h
compiler.h: Avoid nested statement expression in data_race()
compiler.h: Remove data_race() and unnecessary checks from {READ,WRITE}_ONCE()
kcsan: Update Documentation to change supported compilers
kcsan: Remove 'noinline' from __no_kcsan_or_inline
kcsan: Pass option tsan-instrument-read-before-write to Clang
kcsan: Support distinguishing volatile accesses
kcsan: Restrict supported compilers
kcsan: Avoid inserting __tsan_func_entry/exit if possible
ubsan, kcsan: Don't combine sanitizer with kcov on clang
objtool, kcsan: Add kcsan_disable_current() and kcsan_enable_current_nowarn()
kcsan: Add __kcsan_{enable,disable}_current() variants
checkpatch: Warn about data_race() without comment
kcsan: Use GFP_ATOMIC under spin lock
Improve KCSAN documentation a bit
kcsan: Make reporting aware of KCSAN tests
kcsan: Fix function matching in report
kcsan: Change data_race() to no longer require marking racing accesses
kcsan: Move kcsan_{disable,enable}_current() to kcsan-checks.h
...
- Unbreak paravirt VDSO clocks. While the VDSO code was moved into lib
for sharing a subtle check for the validity of paravirt clocks got
replaced. While the replacement works perfectly fine for bare metal as
the update of the VDSO clock mode is synchronous, it fails for paravirt
clocks because the hypervisor can invalidate them asynchronous. Bring
it back as an optional function so it does not inflict this on
architectures which are free of PV damage.
- Fix the jiffies to jiffies64 mapping on 64bit so it does not trigger
an ODR violation on newer compilers
- Three fixes for the SSBD and *IB* speculation mitigation maze to ensure
consistency, not disabling of some *IB* variants wrongly and to prevent
a rogue cross process shutdown of SSBD. All marked for stable.
- Add yet more CPU models to the splitlock detection capable list !@#%$!
- Bring the pr_info() back which tells that TSC deadline timer is enabled.
- Reboot quirk for MacBook6,1
-----BEGIN PGP SIGNATURE-----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=VlBk
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2020-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more x86 updates from Thomas Gleixner:
"A set of fixes and updates for x86:
- Unbreak paravirt VDSO clocks.
While the VDSO code was moved into lib for sharing a subtle check
for the validity of paravirt clocks got replaced. While the
replacement works perfectly fine for bare metal as the update of
the VDSO clock mode is synchronous, it fails for paravirt clocks
because the hypervisor can invalidate them asynchronously.
Bring it back as an optional function so it does not inflict this
on architectures which are free of PV damage.
- Fix the jiffies to jiffies64 mapping on 64bit so it does not
trigger an ODR violation on newer compilers
- Three fixes for the SSBD and *IB* speculation mitigation maze to
ensure consistency, not disabling of some *IB* variants wrongly and
to prevent a rogue cross process shutdown of SSBD. All marked for
stable.
- Add yet more CPU models to the splitlock detection capable list
!@#%$!
- Bring the pr_info() back which tells that TSC deadline timer is
enabled.
- Reboot quirk for MacBook6,1"
* tag 'x86-urgent-2020-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vdso: Unbreak paravirt VDSO clocks
lib/vdso: Provide sanity check for cycles (again)
clocksource: Remove obsolete ifdef
x86_64: Fix jiffies ODR violation
x86/speculation: PR_SPEC_FORCE_DISABLE enforcement for indirect branches.
x86/speculation: Prevent rogue cross-process SSBD shutdown
x86/speculation: Avoid force-disabling IBPB based on STIBP and enhanced IBRS.
x86/cpu: Add Sapphire Rapids CPU model number
x86/split_lock: Add Icelake microserver and Tigerlake CPU models
x86/apic: Make TSC deadline timer detection message visible
x86/reboot/quirks: Add MacBook6,1 reboot quirk
Merge the state of the locking kcsan branch before the read/write_once()
and the atomics modifications got merged.
Squash the fallout of the rebase on top of the read/write once and atomic
fallback work into the merge. The history of the original branch is
preserved in tag locking-kcsan-2020-06-02.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The kbuild test robot reported this warning:
arch/x86/kernel/cpu/mce/dev-mcelog.c: In function 'dev_mcelog_init_device':
arch/x86/kernel/cpu/mce/dev-mcelog.c:346:2: warning: 'strncpy' output \
truncated before terminating nul copying 12 bytes from a string of the \
same length [-Wstringop-truncation]
This is accurate, but I don't care that the trailing NUL character isn't
copied. The string being copied is just a magic number signature so that
crash dump tools can be sure they are decoding the right blob of memory.
Use memcpy() instead of strncpy().
Fixes: d8ecca4043 ("x86/mce/dev-mcelog: Dynamically allocate space for machine check records")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200527182808.27737-1-tony.luck@intel.com
An interesting thing happened when a guest Linux instance took a machine
check. The VMM unmapped the bad page from guest physical space and
passed the machine check to the guest.
Linux took all the normal actions to offline the page from the process
that was using it. But then guest Linux crashed because it said there
was a second machine check inside the kernel with this stack trace:
do_memory_failure
set_mce_nospec
set_memory_uc
_set_memory_uc
change_page_attr_set_clr
cpa_flush
clflush_cache_range_opt
This was odd, because a CLFLUSH instruction shouldn't raise a machine
check (it isn't consuming the data). Further investigation showed that
the VMM had passed in another machine check because is appeared that the
guest was accessing the bad page.
Fix is to check the scope of the poison by checking the MCi_MISC register.
If the entire page is affected, then unmap the page. If only part of the
page is affected, then mark the page as uncacheable.
This assumes that VMMs will do the logical thing and pass in the "whole
page scope" via the MCi_MISC register (since they unmapped the entire
page).
[ bp: Adjust to x86/entry changes. ]
Fixes: 284ce4011b ("x86/memory_failure: Introduce {set, clear}_mce_nospec()")
Reported-by: Jue Wang <juew@google.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jue Wang <juew@google.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200520163546.GA7977@agluck-desk2.amr.corp.intel.com
to fixup conflicts in arch/x86/kernel/cpu/mce/core.c so MCE specific follow
up patches can be applied without creating a horrible merge conflict
afterwards.
The entry rework moved interrupt entry code from the irqentry to the
noinstr section which made the irqentry section empty.
This breaks boundary checks which rely on the __irqentry_text_start/end
markers to find out whether a function in a stack trace is
interrupt/exception entry code. This affects the function graph tracer and
filter_irq_stacks().
As the IDT entry points are all sequentialy emitted this is rather simple
to unbreak by injecting __irqentry_text_start/end as global labels.
To make this work correctly:
- Remove the IRQENTRY_TEXT section from the x86 linker script
- Define __irqentry so it breaks the build if it's used
- Adjust the entry mirroring in PTI
- Remove the redundant kprobes and unwinder bound checks
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
vmlinux.o: warning: objtool: exc_debug()+0xbb: call to clear_ti_thread_flag.constprop.0() leaves .noinstr.text section
vmlinux.o: warning: objtool: noist_exc_debug()+0x55: call to clear_ti_thread_flag.constprop.0() leaves .noinstr.text section
Rework things so that handle_debug() looses the noinstr and move the
clear_thread_flag() into that.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200603114052.127756554@infradead.org
- Move load_current_idt() out of line and replace the hideous comment with
a lockdep assert. This allows to make idt_table and idt_descr static.
- Mark idt_table read only after the IDT initialization is complete.
- Shuffle code around to consolidate the #ifdef sections into one.
- Adapt the F00F bug code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200528145523.084915381@linutronix.de
The difference between 32 and 64 bit vs. early #PF handling is not
documented. Replace the FIXME at idt_setup_early_pf() with proper comments.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200528145522.807135882@linutronix.de
Since 8175cfbbbfcb ("x86/idt: Remove update_intr_gate()") set_intr_gate()
and idt_setup_from_table() are only called from __init functions. Mark them
as well.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200528145522.715816477@linutronix.de
The typical pattern for trace_hardirqs_off_prepare() is:
ENTRY
lockdep_hardirqs_off(); // because hardware
... do entry magic
instrumentation_begin();
trace_hardirqs_off_prepare();
... do actual work
trace_hardirqs_on_prepare();
lockdep_hardirqs_on_prepare();
instrumentation_end();
... do exit magic
lockdep_hardirqs_on();
which shows that it's named wrong, rename it to
trace_hardirqs_off_finish(), as it concludes the hardirq_off transition.
Also, given that the above is the only correct order, make the traditional
all-in-one trace_hardirqs_off() follow suit.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200529213321.415774872@infradead.org
Both #DB itself, as all other IST users (NMI, #MC) now clear DR7 on
entry. Combined with not allowing breakpoints on entry/noinstr/NOKPROBE
text and no single step (EFLAGS.TF) inside the #DB handler should guarantee
no nested #DB.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200529213321.303027161@infradead.org
Because DRn access is 'difficult' with virt; but the DR7 read is cheaper
than a cacheline miss on native, add a virt specific fast path to
local_db_save(), such that when breakpoints are not in use to avoid
touching DRn entirely.
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200529213321.187833200@infradead.org
Instead of playing stupid games with IST stacks, fully disallow #DB
during NMIs. There is absolutely no reason to allow them, and killing
this saves a heap of trouble.
#DB is already forbidden on noinstr and CEA, so there can't be a #DB before
this. Disabling it right after nmi_enter() ensures that the full NMI code
is protected.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200529213321.069223695@infradead.org
In order to allow other exceptions than #DB to disable breakpoints,
provide common helpers.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200529213321.012060983@infradead.org
cpu_tss_rw is not directly referenced by hardware, but cpu_tss_rw is
accessed in CPU entry code, especially when #DB shifts its stacks.
If a data breakpoint would be set on cpu_tss_rw.x86_tss.ist[IST_INDEX_DB],
it would cause recursive #DB ending up in a double fault.
Add it to the list of protected items.
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200526014221.2119-4-laijs@linux.alibaba.com
Link: https://lkml.kernel.org/r/20200529213320.897976479@infradead.org
The last step to remove the irq tracing cruft from ASM. Ignore #DF as the
maschine is going to die anyway.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202120.414043330@linutronix.de
Remove all the code which was there to emit the system vector stubs. All
users are gone.
Move the now unused GET_CR2_INTO macro muck to head_64.S where the last
user is. Fixup the eye hurting comment there while at it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202119.927433002@linutronix.de
The scheduler IPI does not need the full interrupt entry handling logic
when the entry is from kernel mode. Use IDTENTRY_SYSVEC_SIMPLE and spare
all the overhead.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202119.835425642@linutronix.de
Convert various hypervisor vectors to IDTENTRY_SYSVEC:
- Implement the C entry point with DEFINE_IDTENTRY_SYSVEC
- Emit the ASM stub with DECLARE_IDTENTRY_SYSVEC
- Remove the ASM idtentries in 64-bit
- Remove the BUILD_INTERRUPT entries in 32-bit
- Remove the old prototypes
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20200521202119.647997594@linutronix.de
Convert KVM specific system vectors to IDTENTRY_SYSVEC*:
The two empty stub handlers which only increment the stats counter do no
need to run on the interrupt stack. Use IDTENTRY_SYSVEC_SIMPLE for them.
The wakeup handler does more work and runs on the interrupt stack.
None of these handlers need to save and restore the irq_regs pointer.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202119.555715519@linutronix.de
Convert various system vectors to IDTENTRY_SYSVEC:
- Implement the C entry point with DEFINE_IDTENTRY_SYSVEC
- Emit the ASM stub with DECLARE_IDTENTRY_SYSVEC
- Remove the ASM idtentries in 64-bit
- Remove the BUILD_INTERRUPT entries in 32-bit
- Remove the old prototypes
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202119.464812973@linutronix.de
Convert SMP system vectors to IDTENTRY_SYSVEC:
- Implement the C entry point with DEFINE_IDTENTRY_SYSVEC
- Emit the ASM stub with DECLARE_IDTENTRY_SYSVEC
- Remove the ASM idtentries in 64-bit
- Remove the BUILD_INTERRUPT entries in 32-bit
- Remove the old prototypes
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202119.372234635@linutronix.de
Convert APIC interrupts to IDTENTRY_SYSVEC:
- Implement the C entry point with DEFINE_IDTENTRY_SYSVEC
- Emit the ASM stub with DECLARE_IDTENTRY_SYSVEC
- Remove the ASM idtentries in 64-bit
- Remove the BUILD_INTERRUPT entries in 32-bit
- Remove the old prototypes
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202119.280728850@linutronix.de
Replace the extra interrupt handling code and reuse the existing idtentry
machinery. This moves the irq stack switching on 64-bit from ASM to C code;
32-bit already does the stack switching in C.
This requires to remove HAVE_IRQ_EXIT_ON_IRQ_STACK as the stack switch is
not longer in the low level entry code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202119.078690991@linutronix.de
To consolidate the interrupt entry/exit code vs. the other exceptions
make handle_irq() an inline and handle both 64-bit and 32-bit mode.
Preparatory change to move irq stack switching for 64-bit to C which allows
to consolidate the entry exit handling by reusing the idtentry machinery
both in ASM and C.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202118.889972748@linutronix.de
Device interrupts which go through do_IRQ() or the spurious interrupt
handler have their separate entry code on 64 bit for no good reason.
Both 32 and 64 bit transport the vector number through ORIG_[RE]AX in
pt_regs. Further the vector number is forced to fit into an u8 and is
complemented and offset by 0x80 so it's in the signed character
range. Otherwise GAS would expand the pushq to a 5 byte instruction for any
vector > 0x7F.
Treat the vector number like an error code and hand it to the C function as
argument. This allows to get rid of the extra entry code in a later step.
Simplify the error code push magic by implementing the pushq imm8 via a
'.byte 0x6a, vector' sequence so GAS is not able to screw it up. As the
pushq imm8 is sign extending the resulting error code needs to be truncated
to 8 bits in C code.
Originally-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202118.796915981@linutronix.de
The only difference is the name of the per-CPU variable: irq_regs
vs. __irq_regs, but the accessor functions are identical.
Remove the pointless copy and use the generic variant.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202118.704169051@linutronix.de
Convert page fault exceptions to IDTENTRY_RAW:
- Implement the C entry point with DEFINE_IDTENTRY_RAW
- Add the CR2 read into the exception handler
- Add the idtentry_enter/exit_cond_rcu() invocations in
in the regular page fault handler and in the async PF
part.
- Emit the ASM stub with DECLARE_IDTENTRY_RAW
- Remove the ASM idtentry in 64-bit
- Remove the CR2 read from 64-bit
- Remove the open coded ASM entry code in 32-bit
- Fix up the XEN/PV code
- Remove the old prototypes
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202118.238455120@linutronix.de
The first step to get rid of the ENTER/LEAVE_IRQ_STACK ASM macro maze. Use
the new C code helpers to move do_softirq_own_stack() out of ASM code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202117.870911120@linutronix.de
Switch all idtentry_enter/exit() users over to the new conditional RCU
handling scheme and make the user mode entries in #DB, #INT3 and #MCE use
the user mode idtentry functions.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202117.382387286@linutronix.de
The following commit:
095b7a3e7745 ("x86/entry: Convert double fault exception to IDTENTRY_DF")
introduced a new build warning on 64-bit allnoconfig kernels, that have CONFIG_VMAP_STACK disabled:
arch/x86/kernel/traps.c:332:16: warning: unused variable ‘address’ [-Wunused-variable]
This variable is only used if CONFIG_VMAP_STACK is defined, so make it
dependent on that, not CONFIG_X86_64.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexandre Chartre <alexandre.chartre@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Convert #DF to IDTENTRY_DF
- Implement the C entry point with DEFINE_IDTENTRY_DF
- Emit the ASM stub with DECLARE_IDTENTRY_DF on 64bit
- Remove the ASM idtentry in 64bit
- Adjust the 32bit shim code
- Fixup the XEN/PV code
- Remove the old prototypes
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505135315.583415264@linutronix.de
Mark the relevant functions noinstr, use the plain non-instrumented MSR
accessors. The only odd part is the instrumentation_begin()/end() pair around the
indirect machine_check_vector() call as objtool can't figure that out. The
possible invoked functions are annotated correctly.
Also use notrace variant of nmi_enter/exit(). If MCEs happen then hardware
latency tracing is the least of the worries.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505135315.476734898@linutronix.de
The functions invoked from handle_debug() can be instrumented. Tell objtool
about it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505135315.380927730@linutronix.de
Now that there are separate entry points, move the kernel/user_mode specifc
checks into the entry functions so the common handling code does not need
the extra mode checks. Make the code more readable while at it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505135315.283276272@linutronix.de
The MCE entry point uses the same mechanism as the IST entry point for
now. For #DB split the inner workings and just keep the nmi_enter/exit()
magic in the IST variant. Fixup the ASM code to emit the proper
noist_##cfunc call.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505135315.177564104@linutronix.de
Convert #DB to IDTENTRY_ERRORCODE:
- Implement the C entry point with DEFINE_IDTENTRY_DB
- Emit the ASM stub with DECLARE_IDTENTRY
- Remove the ASM idtentry in 64bit
- Remove the open coded ASM entry code in 32bit
- Fixup the XEN/PV code
- Remove the old prototypes
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505135314.900297476@linutronix.de
DR6/7 should be handled before nmi_enter() is invoked and restore after
nmi_exit() to minimize the exposure.
Split it out into helper inlines and bring it into the correct order.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505135314.808628211@linutronix.de
Mark all functions in the fragile code parts noinstr or force inlining so
they can't be instrumented.
Also make the hardware latency tracer invocation explicit outside of
non-instrumentable section.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505135314.716186134@linutronix.de
Convert #NMI to IDTENTRY_NMI:
- Implement the C entry point with DEFINE_IDTENTRY_NMI
- Fixup the XEN/PV code
- Remove the old prototypes
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505135314.609932306@linutronix.de
mce_check_crashing_cpu() is called right at the entry of the MCE
handler. It uses mce_rdmsr() and mce_wrmsr() which are wrappers around
rdmsr() and wrmsr() to handle the MCE error injection mechanism, which is
pointless in this context, i.e. when the MCE hits an offline CPU or the
system is already marked crashing.
The MSR access can also be traced, so use the untraceable variants. This
is also safe vs. XEN paravirt as these MSRs are not affected by XEN PV
modifications.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505135314.426347351@linutronix.de
Convert #MC to IDTENTRY_MCE:
- Implement the C entry points with DEFINE_IDTENTRY_MCE
- Emit the ASM stub with DECLARE_IDTENTRY_MCE
- Remove the ASM idtentry in 64bit
- Remove the open coded ASM entry code in 32bit
- Fixup the XEN/PV code
- Remove the old prototypes
- Remove the error code from *machine_check_vector() as
it is always 0 and not used by any of the functions
it can point to. Fixup all the functions as well.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505135314.334980426@linutronix.de
There is no reason to have nmi_enter/exit() in the actual MCE
handlers. Move it to the entry point. This also covers the until now
uncovered initial handler which only prints.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505135314.243936614@linutronix.de
For code simplicity split up the int3 handler into a kernel and user part
which makes the code flow simpler to understand.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Link: https://lkml.kernel.org/r/20200505135314.045220765@linutronix.de
Convert #BP to IDTENTRY_RAW:
- Implement the C entry point with DEFINE_IDTENTRY_RAW
- Invoke idtentry_enter/exit() from the function body
- Emit the ASM stub with DECLARE_IDTENTRY_RAW
- Remove the ASM idtentry in 64bit
- Remove the open coded ASM entry code in 32bit
- Fixup the XEN/PV code
- Remove the old prototypes
No functional change.
This could be a plain IDTENTRY, but as Peter pointed out INT3 is broken
vs. the static key in the context tracking code as this static key might be
in the state of being patched and has an int3 which would recurse forever.
IDTENTRY_RAW is therefore chosen to allow addressing this issue without
lots of code churn.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505135313.938474960@linutronix.de
Avoid calling out to bsearch() by inlining it, for normal kernel configs
this was the last external call and poke_int3_handler() is now fully self
sufficient -- no calls to external code.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505135313.731774429@linutronix.de
Use arch_atomic_*() and __READ_ONCE() to ensure nothing untoward
creeps in and ruins things.
That is; this is the INT3 text poke handler, strictly limit the code
that runs in it, lest it inadvertenly hits yet another INT3.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505135313.517429268@linutronix.de
In order to ensure poke_int3_handler() is completely self contained -- this
is called while modifying other text, imagine the fun of hitting another
INT3 -- ensure that everything it uses is not traced.
The primary means here is to force inlining; bsearch() is notrace because
all of lib/ is.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505135313.410702173@linutronix.de
Convert the IRET exception handler to IDTENTRY_SW. This is slightly
different than the conversions of hardware exceptions as the IRET exception
is invoked via an exception table when IRET faults. So it just uses the
IDTENTRY_SW mechanism for consistency. It does not emit ASM code as it does
not fit the other idtentry exceptions.
- Implement the C entry point with DEFINE_IDTENTRY_SW() which maps to
DEFINE_IDTENTRY()
- Fixup the XEN/PV code
- Remove the old prototypes
- Remove the RCU warning as the new entry macro ensures correctness
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505134906.128769226@linutronix.de
Convert #XF to IDTENTRY_ERRORCODE:
- Implement the C entry point with DEFINE_IDTENTRY
- Emit the ASM stub with DECLARE_IDTENTRY
- Handle INVD_BUG in C
- Remove the ASM idtentry in 64bit
- Remove the open coded ASM entry code in 32bit
- Fixup the XEN/PV code
- Remove the old prototypes
- Remove the RCU warning as the new entry macro ensures correctness
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505134906.021552202@linutronix.de
Convert #AC to IDTENTRY_ERRORCODE:
- Implement the C entry point with DEFINE_IDTENTRY
- Emit the ASM stub with DECLARE_IDTENTRY
- Remove the ASM idtentry in 64bit
- Remove the open coded ASM entry code in 32bit
- Fixup the XEN/PV code
- Remove the old prototypes
- Remove the RCU warning as the new entry macro ensures correctness
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505134905.928967113@linutronix.de
Convert #MF to IDTENTRY_ERRORCODE:
- Implement the C entry point with DEFINE_IDTENTRY
- Emit the ASM stub with DECLARE_IDTENTRY
- Remove the ASM idtentry in 64bit
- Remove the open coded ASM entry code in 32bit
- Fixup the XEN/PV code
- Remove the old prototypes
- Remove the RCU warning as the new entry macro ensures correctness
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505134905.838823510@linutronix.de
Convert #SPURIOUS to IDTENTRY_ERRORCODE:
- Implement the C entry point with DEFINE_IDTENTRY
- Emit the ASM stub with DECLARE_IDTENTRY
- Remove the ASM idtentry in 64bit
- Remove the open coded ASM entry code in 32bit
- Fixup the XEN/PV code
- Remove the old prototypes
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505134905.728077036@linutronix.de
Convert #GP to IDTENTRY_ERRORCODE:
- Implement the C entry point with DEFINE_IDTENTRY
- Emit the ASM stub with DECLARE_IDTENTRY
- Remove the ASM idtentry in 64bit
- Remove the open coded ASM entry code in 32bit
- Fixup the XEN/PV code
- Remove the old prototypes
- Remove the RCU warning as the new entry macro ensures correctness
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505134905.637269946@linutronix.de
Convert #SS to IDTENTRY_ERRORCODE:
- Implement the C entry point with DEFINE_IDTENTRY
- Emit the ASM stub with DECLARE_IDTENTRY
- Remove the ASM idtentry in 64bit
- Remove the open coded ASM entry code in 32bit
- Fixup the XEN/PV code
- Remove the old prototypes
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505134905.539867572@linutronix.de
Convert #NP to IDTENTRY_ERRORCODE:
- Implement the C entry point with DEFINE_IDTENTRY
- Emit the ASM stub with DECLARE_IDTENTRY
- Remove the ASM idtentry in 64bit
- Remove the open coded ASM entry code in 32bit
- Fixup the XEN/PV code
- Remove the old prototypes
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134905.443591450@linutronix.de
Convert #TS to IDTENTRY_ERRORCODE:
- Implement the C entry point with DEFINE_IDTENTRY
- Emit the ASM stub with DECLARE_IDTENTRY
- Remove the ASM idtentry in 64bit
- Remove the open coded ASM entry code in 32bit
- Fixup the XEN/PV code
- Remove the old prototypes
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134905.350676449@linutronix.de
Convert #OLD_MF to IDTENTRY:
- Implement the C entry point with DEFINE_IDTENTRY
- Emit the ASM stub with DECLARE_IDTENTRY
- Remove the ASM idtentry in 64bit
- Remove the open coded ASM entry code in 32bit
- Fixup the XEN/PV code
- Remove the old prototypes
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134905.838823510@linutronix.de
Convert #NM to IDTENTRY:
- Implement the C entry point with DEFINE_IDTENTRY
- Emit the ASM stub with DECLARE_IDTENTRY
- Remove the ASM idtentry in 64bit
- Remove the open coded ASM entry code in 32bit
- Fixup the XEN/PV code
- Remove the old prototypes
- Remove the RCU warning as the new entry macro ensures correctness
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134905.056243863@linutronix.de
Convert #UD to IDTENTRY:
- Implement the C entry point with DEFINE_IDTENTRY
- Emit the ASM stub with DECLARE_IDTENTRY
- Remove the ASM idtentry in 64bit
- Remove the open coded ASM entry code in 32bit
- Fixup the XEN/PV code
- Fixup the FOOF bug call in fault.c
- Remove the old prototypes
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134904.955511913@linutronix.de
Convert #BR to IDTENTRY:
- Implement the C entry point with DEFINE_IDTENTRY
- Emit the ASM stub with DECLARE_IDTENTRY
- Remove the ASM idtentry in 64bit
- Remove the open coded ASM entry code in 32bit
- Fixup the XEN/PV code
- Remove the old prototypes
- Remove the RCU warning as the new entry macro ensures correctness
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134904.863001309@linutronix.de
Convert #OF to IDTENTRY:
- Implement the C entry point with DEFINE_IDTENTRY
- Emit the ASM stub with DECLARE_IDTENTRY
- Remove the ASM idtentry in 64bit
- Remove the open coded ASM entry code in 32bit
- Fixup the XEN/PV code
- Remove the old prototypes
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134904.771457898@linutronix.de
Convert #DE to IDTENTRY:
- Implement the C entry point with DEFINE_IDTENTRY
- Emit the ASM stub with DECLARE_IDTENTRY
- Remove the ASM idtentry in 64bit
- Remove the open coded ASM entry code in 32bit
- Fixup the XEN/PV code
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505134904.663914713@linutronix.de
Prepare for using IDTENTRY to define the C exception/trap entry points. It
would be possible to glue this into the existing macro maze, but it's
simpler and better to read at the end to just make them distinct.
Provide a trivial inline helper to read the trap address and add a comment
explaining the logic behind it.
The existing macros will be removed once all instances are converted.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134904.556327833@linutronix.de
Traps enable interrupts conditionally but rely on the ASM return code to
disable them again. That results in redundant interrupt disable and trace
calls.
Make the trap handlers disable interrupts before returning to avoid that,
which allows simplification of the ASM entry code in follow up changes.
Originally-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505134903.622702796@linutronix.de
Replace the notrace and NOKPROBE annotations with noinstr.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505134903.439765290@linutronix.de
This is called from deep entry ASM in a situation where instrumentation
will cause more harm than providing useful information.
Switch from memmove() to memcpy() because memmove() can't be called
from noinstr code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505134903.346741553@linutronix.de
All ASM code which is not part of the entry functionality can move out into
the .text section. No reason to keep it in the non-instrumentable entry
section.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134340.227579223@linutronix.de
Use of memmove() in #DF is problematic considered tracing and other
instrumentation.
Remove the memmove() call and simply write out what needs doing; this
even clarifies the code, win-win! The code copies from the espfix64
stack to the normal task stack, there is no possible way for that to
overlap.
Survives selftests/x86, specifically sigreturn_64.
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505134058.863038566@linutronix.de
A data breakpoint near the top of an IST stack will cause unrecoverable
recursion. A data breakpoint on the GDT, IDT, or TSS is terrifying.
Prevent either of these from happening.
Co-developed-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Link: https://lkml.kernel.org/r/20200505134058.272448010@linutronix.de
With commit dc20b2d526 ("x86/idt: Move interrupt gate initialization to
IDT code") non assigned system vectors are also marked as used in
'used_vectors' (now 'system_vectors') bitmap. This makes checks in
arch_show_interrupts() whether a particular system vector is allocated to
always pass and e.g. 'Hyper-V reenlightenment interrupts' entry always
shows up in /proc/interrupts.
Another side effect of having all unassigned system vectors marked as used
is that irq_matrix_debug_show() will wrongly count them among 'System'
vectors.
As it is now ensured that alloc_intr_gate() is not called after init, it is
possible to leave unused entries in 'system_vectors' unset to fix these
issues.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200428093824.1451532-4-vkuznets@redhat.com
There seems to be no reason to allocate interrupt gates after init. Mark
alloc_intr_gate() as __init and add WARN_ON() checks making sure it is
only used before idt_setup_apic_and_irq_gates() finalizes IDT setup and
maps all un-allocated entries to spurious entries.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200428093824.1451532-3-vkuznets@redhat.com
machine_check is function address, the address operator on it is nop for
compiler.
Make it consistent with the other function addresses in the same file.
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200419144049.1906-3-laijs@linux.alibaba.com
Pull misc uaccess updates from Al Viro:
"Assorted uaccess patches for this cycle - the stuff that didn't fit
into thematic series"
* 'uaccess.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
bpf: make bpf_check_uarg_tail_zero() use check_zeroed_user()
x86: kvm_hv_set_msr(): use __put_user() instead of 32bit __clear_user()
user_regset_copyout_zero(): use clear_user()
TEST_ACCESS_OK _never_ had been checked anywhere
x86: switch cp_stat64() to unsafe_put_user()
binfmt_flat: don't use __put_user()
binfmt_elf_fdpic: don't use __... uaccess primitives
binfmt_elf: don't bother with __{put,copy_to}_user()
pselect6() and friends: take handling the combined 6th/7th args into helper
Merge even more updates from Andrew Morton:
- a kernel-wide sweep of show_stack()
- pagetable cleanups
- abstract out accesses to mmap_sem - prep for mmap_sem scalability work
- hch's user acess work
Subsystems affected by this patch series: debug, mm/pagemap, mm/maccess,
mm/documentation.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (93 commits)
include/linux/cache.h: expand documentation over __read_mostly
maccess: return -ERANGE when probe_kernel_read() fails
x86: use non-set_fs based maccess routines
maccess: allow architectures to provide kernel probing directly
maccess: move user access routines together
maccess: always use strict semantics for probe_kernel_read
maccess: remove strncpy_from_unsafe
tracing/kprobes: handle mixed kernel/userspace probes better
bpf: rework the compat kernel probe handling
bpf:bpf_seq_printf(): handle potentially unsafe format string better
bpf: handle the compat string in bpf_trace_copy_string better
bpf: factor out a bpf_trace_copy_string helper
maccess: unify the probe kernel arch hooks
maccess: remove probe_read_common and probe_write_common
maccess: rename strnlen_unsafe_user to strnlen_user_nofault
maccess: rename strncpy_from_unsafe_strict to strncpy_from_kernel_nofault
maccess: rename strncpy_from_unsafe_user to strncpy_from_user_nofault
maccess: update the top of file comment
maccess: clarify kerneldoc comments
maccess: remove duplicate kerneldoc comments
...
Define a new initializer for the mmap locking api. Initially this just
evaluates to __RWSEM_INITIALIZER as the API is defined as wrappers around
rwsem.
Signed-off-by: Michel Lespinasse <walken@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Liam Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ying Han <yinghan@google.com>
Link: http://lkml.kernel.org/r/20200520052908.204642-9-walken@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include
of the latter in the middle of asm includes. Fix this up with the aid of
the below script and manual adjustments here and there.
import sys
import re
if len(sys.argv) is not 3:
print "USAGE: %s <file> <header>" % (sys.argv[0])
sys.exit(1)
hdr_to_move="#include <linux/%s>" % sys.argv[2]
moved = False
in_hdrs = False
with open(sys.argv[1], "r") as f:
lines = f.readlines()
for _line in lines:
line = _line.rstrip('
')
if line == hdr_to_move:
continue
if line.startswith("#include <linux/"):
in_hdrs = True
elif not moved and in_hdrs:
moved = True
print hdr_to_move
print line
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The include/linux/pgtable.h is going to be the home of generic page table
manipulation functions.
Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and
make the latter include asm/pgtable.h.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm: consolidate definitions of page table accessors", v2.
The low level page table accessors (pXY_index(), pXY_offset()) are
duplicated across all architectures and sometimes more than once. For
instance, we have 31 definition of pgd_offset() for 25 supported
architectures.
Most of these definitions are actually identical and typically it boils
down to, e.g.
static inline unsigned long pmd_index(unsigned long address)
{
return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1);
}
static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
{
return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address);
}
These definitions can be shared among 90% of the arches provided
XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined.
For architectures that really need a custom version there is always
possibility to override the generic version with the usual ifdefs magic.
These patches introduce include/linux/pgtable.h that replaces
include/asm-generic/pgtable.h and add the definitions of the page table
accessors to the new header.
This patch (of 12):
The linux/mm.h header includes <asm/pgtable.h> to allow inlining of the
functions involving page table manipulations, e.g. pte_alloc() and
pmd_alloc(). So, there is no point to explicitly include <asm/pgtable.h>
in the files that include <linux/mm.h>.
The include statements in such cases are remove with a simple loop:
for f in $(git grep -l "include <linux/mm.h>") ; do
sed -i -e '/include <asm\/pgtable.h>/ d' $f
done
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org
Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now the last users of show_stack() got converted to use an explicit log
level, show_stack_loglvl() can drop it's redundant suffix and become once
again well known show_stack().
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200418201944.482088-51-dima@arista.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's under CONFIG_IOMMU_LEAK option which is enabled by debug config.
Likely the backtrace is worth to be seen - so aligning with log level of
error message in iommu_full().
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20200418201944.482088-46-dima@arista.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Introduce show_stack_loglvl(), that eventually will substitute
show_stack().
[1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#u
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20200418201944.482088-42-dima@arista.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Keep log_lvl const show_trace_log_lvl() and printk_stack_address() as the
new generic show_stack_loglvl() wants to have a proper const qualifier.
And gcc rightfully produces warnings in case it's not keept:
arch/x86/kernel/dumpstack.c: In function `show_stack':
arch/x86/kernel/dumpstack.c:294:37: warning: passing argument 4 of `show_trace_log_lv ' discards `const' qualifier from pointer target type [-Wdiscarded-qualifiers]
294 | show_trace_log_lvl(task, NULL, sp, loglvl);
| ^~~~~~
arch/x86/kernel/dumpstack.c:163:32: note: expected `char *' but argument is of type `const char *'
163 | unsigned long *stack, char *log_lvl)
| ~~~~~~^~~~~~~
[1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#u
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20200418201944.482088-41-dima@arista.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull x86 srbds fixes from Thomas Gleixner:
"The 9th episode of the dime novel "The performance killer" with the
subtitle "Slow Randomizing Boosts Denial of Service".
SRBDS is an MDS-like speculative side channel that can leak bits from
the random number generator (RNG) across cores and threads. New
microcode serializes the processor access during the execution of
RDRAND and RDSEED. This ensures that the shared buffer is overwritten
before it is released for reuse. This is equivalent to a full bus
lock, which means that many threads running the RNG instructions in
parallel have the same effect as the same amount of threads issuing a
locked instruction targeting an address which requires locking of two
cachelines at once.
The mitigation support comes with the usual pile of unpleasant
ingredients:
- command line options
- sysfs file
- microcode checks
- a list of vulnerable CPUs identified by model and stepping this
time which requires stepping match support for the cpu match logic.
- the inevitable slowdown of affected CPUs"
* branch 'x86/srbds' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/speculation: Add Ivy Bridge to affected list
x86/speculation: Add SRBDS vulnerability and mitigation documentation
x86/speculation: Add Special Register Buffer Data Sampling (SRBDS) mitigation
x86/cpu: Add 'table' argument to cpu_matches()
'jiffies' and 'jiffies_64' are meant to alias (two different symbols that
share the same address). Most architectures make the symbols alias to the
same address via a linker script assignment in their
arch/<arch>/kernel/vmlinux.lds.S:
jiffies = jiffies_64;
which is effectively a definition of jiffies.
jiffies and jiffies_64 are both forward declared for all architectures in
include/linux/jiffies.h. jiffies_64 is defined in kernel/time/timer.c.
x86_64 was peculiar in that it wasn't doing the above linker script
assignment, but rather was:
1. defining jiffies in arch/x86/kernel/time.c instead via the linker script.
2. overriding the symbol jiffies_64 from kernel/time/timer.c in
arch/x86/kernel/vmlinux.lds.s via 'jiffies_64 = jiffies;'.
As Fangrui notes:
In LLD, symbol assignments in linker scripts override definitions in
object files. GNU ld appears to have the same behavior. It would
probably make sense for LLD to error "duplicate symbol" but GNU ld
is unlikely to adopt for compatibility reasons.
This results in an ODR violation (UB), which seems to have survived
thus far. Where it becomes harmful is when;
1. -fno-semantic-interposition is used:
As Fangrui notes:
Clang after LLVM commit 5b22bcc2b70d
("[X86][ELF] Prefer to lower MC_GlobalAddress operands to .Lfoo$local")
defaults to -fno-semantic-interposition similar semantics which help
-fpic/-fPIC code avoid GOT/PLT when the referenced symbol is defined
within the same translation unit. Unlike GCC
-fno-semantic-interposition, Clang emits such relocations referencing
local symbols for non-pic code as well.
This causes references to jiffies to refer to '.Ljiffies$local' when
jiffies is defined in the same translation unit. Likewise, references to
jiffies_64 become references to '.Ljiffies_64$local' in translation units
that define jiffies_64. Because these differ from the names used in the
linker script, they will not be rewritten to alias one another.
2. Full LTO
Full LTO effectively treats all source files as one translation
unit, causing these local references to be produced everywhere. When
the linker processes the linker script, there are no longer any
references to jiffies_64' anywhere to replace with 'jiffies'. And
thus '.Ljiffies$local' and '.Ljiffies_64$local' no longer alias
at all.
In the process of porting patches enabling Full LTO from arm64 to x86_64,
spooky bugs have been observed where the kernel appeared to boot, but init
doesn't get scheduled.
Avoid the ODR violation by matching other architectures and define jiffies
only by linker script. For -fno-semantic-interposition + Full LTO, there
is no longer a global definition of jiffies for the compiler to produce a
local symbol which the linker script won't ensure aliases to jiffies_64.
Fixes: 40747ffa5a ("asmlinkage: Make jiffies visible")
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Reported-by: Alistair Delva <adelva@google.com>
Debugged-by: Nick Desaulniers <ndesaulniers@google.com>
Debugged-by: Sami Tolvanen <samitolvanen@google.com>
Suggested-by: Fangrui Song <maskray@google.com>
Signed-off-by: Bob Haarman <inglorion@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # build+boot on
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: stable@vger.kernel.org
Link: https://github.com/ClangBuiltLinux/linux/issues/852
Link: https://lkml.kernel.org/r/20200602193100.229287-1-inglorion@google.com
Currently, it is possible to enable indirect branch speculation even after
it was force-disabled using the PR_SPEC_FORCE_DISABLE option. Moreover, the
PR_GET_SPECULATION_CTRL command gives afterwards an incorrect result
(force-disabled when it is in fact enabled). This also is inconsistent
vs. STIBP and the documention which cleary states that
PR_SPEC_FORCE_DISABLE cannot be undone.
Fix this by actually enforcing force-disabled indirect branch
speculation. PR_SPEC_ENABLE called after PR_SPEC_FORCE_DISABLE now fails
with -EPERM as described in the documentation.
Fixes: 9137bb27e6 ("x86/speculation: Add prctl() control for indirect branch speculation")
Signed-off-by: Anthony Steinhauser <asteinhauser@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
On context switch the change of TIF_SSBD and TIF_SPEC_IB are evaluated
to adjust the mitigations accordingly. This is optimized to avoid the
expensive MSR write if not needed.
This optimization is buggy and allows an attacker to shutdown the SSBD
protection of a victim process.
The update logic reads the cached base value for the speculation control
MSR which has neither the SSBD nor the STIBP bit set. It then OR's the
SSBD bit only when TIF_SSBD is different and requests the MSR update.
That means if TIF_SSBD of the previous and next task are the same, then
the base value is not updated, even if TIF_SSBD is set. The MSR write is
not requested.
Subsequently if the TIF_STIBP bit differs then the STIBP bit is updated
in the base value and the MSR is written with a wrong SSBD value.
This was introduced when the per task/process conditional STIPB
switching was added on top of the existing SSBD switching.
It is exploitable if the attacker creates a process which enforces SSBD
and has the contrary value of STIBP than the victim process (i.e. if the
victim process enforces STIBP, the attacker process must not enforce it;
if the victim process does not enforce STIBP, the attacker process must
enforce it) and schedule it on the same core as the victim process. If
the victim runs after the attacker the victim becomes vulnerable to
Spectre V4.
To fix this, update the MSR value independent of the TIF_SSBD difference
and dependent on the SSBD mitigation method available. This ensures that
a subsequent STIPB initiated MSR write has the correct state of SSBD.
[ tglx: Handle X86_FEATURE_VIRT_SSBD & X86_FEATURE_VIRT_SSBD correctly
and massaged changelog ]
Fixes: 5bfbe3ad58 ("x86/speculation: Prepare for per task indirect branch speculation control")
Signed-off-by: Anthony Steinhauser <asteinhauser@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
When STIBP is unavailable or enhanced IBRS is available, Linux
force-disables the IBPB mitigation of Spectre-BTB even when simultaneous
multithreading is disabled. While attempts to enable IBPB using
prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, ...) fail with
EPERM, the seccomp syscall (or its prctl(PR_SET_SECCOMP, ...) equivalent)
which are used e.g. by Chromium or OpenSSH succeed with no errors but the
application remains silently vulnerable to cross-process Spectre v2 attacks
(classical BTB poisoning). At the same time the SYSFS reporting
(/sys/devices/system/cpu/vulnerabilities/spectre_v2) displays that IBPB is
conditionally enabled when in fact it is unconditionally disabled.
STIBP is useful only when SMT is enabled. When SMT is disabled and STIBP is
unavailable, it makes no sense to force-disable also IBPB, because IBPB
protects against cross-process Spectre-BTB attacks regardless of the SMT
state. At the same time since missing STIBP was only observed on AMD CPUs,
AMD does not recommend using STIBP, but recommends using IBPB, so disabling
IBPB because of missing STIBP goes directly against AMD's advice:
https://developer.amd.com/wp-content/resources/Architecture_Guidelines_Update_Indirect_Branch_Control.pdf
Similarly, enhanced IBRS is designed to protect cross-core BTB poisoning
and BTB-poisoning attacks from user space against kernel (and
BTB-poisoning attacks from guest against hypervisor), it is not designed
to prevent cross-process (or cross-VM) BTB poisoning between processes (or
VMs) running on the same core. Therefore, even with enhanced IBRS it is
necessary to flush the BTB during context-switches, so there is no reason
to force disable IBPB when enhanced IBRS is available.
Enable the prctl control of IBPB even when STIBP is unavailable or enhanced
IBRS is available.
Fixes: 7cc765a67d ("x86/speculation: Enable prctl mode for spectre_v2_user")
Signed-off-by: Anthony Steinhauser <asteinhauser@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
- Unexport various PAT primitives
- Unexport per-CPU tlbstate
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=RXKK
-----END PGP SIGNATURE-----
Merge tag 'x86-mm-2020-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Ingo Molnar:
"Misc changes:
- Unexport various PAT primitives
- Unexport per-CPU tlbstate and uninline TLB helpers"
* tag 'x86-mm-2020-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
x86/tlb/uv: Add a forward declaration for struct flush_tlb_info
x86/cpu: Export native_write_cr4() only when CONFIG_LKTDM=m
x86/tlb: Restrict access to tlbstate
xen/privcmd: Remove unneeded asm/tlb.h include
x86/tlb: Move PCID helpers where they are used
x86/tlb: Uninline nmi_uaccess_okay()
x86/tlb: Move cr4_set_bits_and_update_boot() to the usage site
x86/tlb: Move paravirt_tlb_remove_table() to the usage site
x86/tlb: Move __flush_tlb_all() out of line
x86/tlb: Move flush_tlb_others() out of line
x86/tlb: Move __flush_tlb_one_kernel() out of line
x86/tlb: Move __flush_tlb_one_user() out of line
x86/tlb: Move __flush_tlb_global() out of line
x86/tlb: Move __flush_tlb() out of line
x86/alternatives: Move temporary_mm helpers into C
x86/cr4: Sanitize CR4.PCE update
x86/cpu: Uninline CR4 accessors
x86/tlb: Uninline __get_current_cr3_fast()
x86/mm: Use pgprotval_t in protval_4k_2_large() and protval_large_2_4k()
x86/mm: Unexport __cachemode2pte_tbl
...
Pull livepatching updates from Jiri Kosina:
- simplifications and improvements for issues Peter Ziljstra found
during his previous work on W^X cleanups.
This allows us to remove livepatch arch-specific .klp.arch sections
and add proper support for jump labels in patched code.
Also, this patchset removes the last module_disable_ro() usage in the
tree.
Patches from Josh Poimboeuf and Peter Zijlstra
- a few other minor cleanups
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
MAINTAINERS: add lib/livepatch to LIVE PATCHING
livepatch: add arch-specific headers to MAINTAINERS
livepatch: Make klp_apply_object_relocs static
MAINTAINERS: adjust to livepatch .klp.arch removal
module: Make module_enable_ro() static again
x86/module: Use text_mutex in apply_relocate_add()
module: Remove module_disable_ro()
livepatch: Remove module_disable_ro() usage
x86/module: Use text_poke() for late relocations
s390/module: Use s390_kernel_write() for late relocations
s390: Change s390_kernel_write() return type to match memcpy()
livepatch: Prevent module-specific KLP rela sections from referencing vmlinux symbols
livepatch: Remove .klp.arch
livepatch: Apply vmlinux-specific KLP relocations early
livepatch: Disallow vmlinux.ko
Remove KVM_DEBUG_FS, which can easily be misconstrued as controlling
KVM-as-a-host. The sole user of CONFIG_KVM_DEBUG_FS was removed by
commit cfd8983f03 ("x86, locking/spinlocks: Remove ticket (spin)lock
implementation").
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200528031121.28904-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull networking updates from David Miller:
1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
Augusto von Dentz.
2) Add GSO partial support to igc, from Sasha Neftin.
3) Several cleanups and improvements to r8169 from Heiner Kallweit.
4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
device self-test. From Andrew Lunn.
5) Start moving away from custom driver versions, use the globally
defined kernel version instead, from Leon Romanovsky.
6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.
7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.
8) Add sriov and vf support to hinic, from Luo bin.
9) Support Media Redundancy Protocol (MRP) in the bridging code, from
Horatiu Vultur.
10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.
11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
Dubroca. Also add ipv6 support for espintcp.
12) Lots of ReST conversions of the networking documentation, from Mauro
Carvalho Chehab.
13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
from Doug Berger.
14) Allow to dump cgroup id and filter by it in inet_diag code, from
Dmitry Yakunin.
15) Add infrastructure to export netlink attribute policies to
userspace, from Johannes Berg.
16) Several optimizations to sch_fq scheduler, from Eric Dumazet.
17) Fallback to the default qdisc if qdisc init fails because otherwise
a packet scheduler init failure will make a device inoperative. From
Jesper Dangaard Brouer.
18) Several RISCV bpf jit optimizations, from Luke Nelson.
19) Correct the return type of the ->ndo_start_xmit() method in several
drivers, it's netdev_tx_t but many drivers were using
'int'. From Yunjian Wang.
20) Add an ethtool interface for PHY master/slave config, from Oleksij
Rempel.
21) Add BPF iterators, from Yonghang Song.
22) Add cable test infrastructure, including ethool interfaces, from
Andrew Lunn. Marvell PHY driver is the first to support this
facility.
23) Remove zero-length arrays all over, from Gustavo A. R. Silva.
24) Calculate and maintain an explicit frame size in XDP, from Jesper
Dangaard Brouer.
25) Add CAP_BPF, from Alexei Starovoitov.
26) Support terse dumps in the packet scheduler, from Vlad Buslov.
27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.
28) Add devm_register_netdev(), from Bartosz Golaszewski.
29) Minimize qdisc resets, from Cong Wang.
30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
eliminate set_fs/get_fs calls. From Christoph Hellwig.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
selftests: net: ip_defrag: ignore EPERM
net_failover: fixed rollback in net_failover_open()
Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
vmxnet3: allow rx flow hash ops only when rss is enabled
hinic: add set_channels ethtool_ops support
selftests/bpf: Add a default $(CXX) value
tools/bpf: Don't use $(COMPILE.c)
bpf, selftests: Use bpf_probe_read_kernel
s390/bpf: Use bcr 0,%0 as tail call nop filler
s390/bpf: Maintain 8-byte stack alignment
selftests/bpf: Fix verifier test
selftests/bpf: Fix sample_cnt shared between two threads
bpf, selftests: Adapt cls_redirect to call csum_level helper
bpf: Add csum_level helper for fixing up csum levels
bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
crypto/chtls: IPv6 support for inline TLS
Crypto/chcr: Fixes a coccinile check error
Crypto/chcr: Fixes compilations warnings
...
- Move the arch-specific code into arch/arm64/kvm
- Start the post-32bit cleanup
- Cherry-pick a few non-invasive pre-NV patches
x86:
- Rework of TLB flushing
- Rework of event injection, especially with respect to nested virtualization
- Nested AMD event injection facelift, building on the rework of generic code
and fixing a lot of corner cases
- Nested AMD live migration support
- Optimization for TSC deadline MSR writes and IPIs
- Various cleanups
- Asynchronous page fault cleanups (from tglx, common topic branch with tip tree)
- Interrupt-based delivery of asynchronous "page ready" events (host side)
- Hyper-V MSRs and hypercalls for guest debugging
- VMX preemption timer fixes
s390:
- Cleanups
Generic:
- switch vCPU thread wakeup from swait to rcuwait
The other architectures, and the guest side of the asynchronous page fault
work, will come next week.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl7VJcYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPf6QgAq4wU5wdd1lTGz/i3DIhNVJNJgJlp
ozLzRdMaJbdbn5RpAK6PEBd9+pt3+UlojpFB3gpJh2Nazv2OzV4yLQgXXXyyMEx1
5Hg7b4UCJYDrbkCiegNRv7f/4FWDkQ9dx++RZITIbxeskBBCEI+I7GnmZhGWzuC4
7kj4ytuKAySF2OEJu0VQF6u0CvrNYfYbQIRKBXjtOwuRK4Q6L63FGMJpYo159MBQ
asg3B1jB5TcuGZ9zrjL5LkuzaP4qZZHIRs+4kZsH9I6MODHGUxKonrkablfKxyKy
CFK+iaHCuEXXty5K0VmWM3nrTfvpEjVjbMc7e1QGBQ5oXsDM0pqn84syRg==
=v7Wn
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Move the arch-specific code into arch/arm64/kvm
- Start the post-32bit cleanup
- Cherry-pick a few non-invasive pre-NV patches
x86:
- Rework of TLB flushing
- Rework of event injection, especially with respect to nested
virtualization
- Nested AMD event injection facelift, building on the rework of
generic code and fixing a lot of corner cases
- Nested AMD live migration support
- Optimization for TSC deadline MSR writes and IPIs
- Various cleanups
- Asynchronous page fault cleanups (from tglx, common topic branch
with tip tree)
- Interrupt-based delivery of asynchronous "page ready" events (host
side)
- Hyper-V MSRs and hypercalls for guest debugging
- VMX preemption timer fixes
s390:
- Cleanups
Generic:
- switch vCPU thread wakeup from swait to rcuwait
The other architectures, and the guest side of the asynchronous page
fault work, will come next week"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (256 commits)
KVM: selftests: fix rdtsc() for vmx_tsc_adjust_test
KVM: check userspace_addr for all memslots
KVM: selftests: update hyperv_cpuid with SynDBG tests
x86/kvm/hyper-v: Add support for synthetic debugger via hypercalls
x86/kvm/hyper-v: enable hypercalls regardless of hypercall page
x86/kvm/hyper-v: Add support for synthetic debugger interface
x86/hyper-v: Add synthetic debugger definitions
KVM: selftests: VMX preemption timer migration test
KVM: nVMX: Fix VMX preemption timer migration
x86/kvm/hyper-v: Explicitly align hcall param for kvm_hyperv_exit
KVM: x86/pmu: Support full width counting
KVM: x86/pmu: Tweak kvm_pmu_get_msr to pass 'struct msr_data' in
KVM: x86: announce KVM_FEATURE_ASYNC_PF_INT
KVM: x86: acknowledgment mechanism for async pf page ready notifications
KVM: x86: interrupt based APF 'page ready' event delivery
KVM: introduce kvm_read_guest_offset_cached()
KVM: rename kvm_arch_can_inject_async_page_present() to kvm_arch_can_dequeue_async_page_present()
KVM: x86: extend struct kvm_vcpu_pv_apf_data with token info
Revert "KVM: async_pf: Fix #DF due to inject "Page not Present" and "Page Ready" exceptions simultaneously"
KVM: VMX: Replace zero-length array with flexible-array
...
- Add TPAUSE based delay which allows the CPU to enter an optimized power
state while waiting for the delay to pass. The delay is based on TSC
cycles.
- Add tsc_early_khz command line parameter to workaround the problem that
overclocked CPUs can report the wrong frequency via CPUID.16h which
causes the refined calibration to fail because the delta to the initial
frequency value is too big. With the parameter users can provide an
halfways accurate initial value.
-----BEGIN PGP SIGNATURE-----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=199V
-----END PGP SIGNATURE-----
Merge tag 'x86-timers-2020-06-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 timer updates from Thomas Gleixner:
"X86 timer specific updates:
- Add TPAUSE based delay which allows the CPU to enter an optimized
power state while waiting for the delay to pass. The delay is based
on TSC cycles.
- Add tsc_early_khz command line parameter to workaround the problem
that overclocked CPUs can report the wrong frequency via CPUID.16h
which causes the refined calibration to fail because the delta to
the initial frequency value is too big. With the parameter users
can provide an halfways accurate initial value"
* tag 'x86-timers-2020-06-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tsc: Add tsc_early_khz command line parameter
x86/delay: Introduce TPAUSE delay
x86/delay: Refactor delay_mwaitx() for TPAUSE support
x86/delay: Preparatory code cleanup
Merge updates from Andrew Morton:
"A few little subsystems and a start of a lot of MM patches.
Subsystems affected by this patch series: squashfs, ocfs2, parisc,
vfs. With mm subsystems: slab-generic, slub, debug, pagecache, gup,
swap, memcg, pagemap, memory-failure, vmalloc, kasan"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (128 commits)
kasan: move kasan_report() into report.c
mm/mm_init.c: report kasan-tag information stored in page->flags
ubsan: entirely disable alignment checks under UBSAN_TRAP
kasan: fix clang compilation warning due to stack protector
x86/mm: remove vmalloc faulting
mm: remove vmalloc_sync_(un)mappings()
x86/mm/32: implement arch_sync_kernel_mappings()
x86/mm/64: implement arch_sync_kernel_mappings()
mm/ioremap: track which page-table levels were modified
mm/vmalloc: track which page-table levels were modified
mm: add functions to track page directory modifications
s390: use __vmalloc_node in stack_alloc
powerpc: use __vmalloc_node in alloc_vm_stack
arm64: use __vmalloc_node in arch_alloc_vmap_stack
mm: remove vmalloc_user_node_flags
mm: switch the test_vmalloc module to use __vmalloc_node
mm: remove __vmalloc_node_flags_caller
mm: remove both instances of __vmalloc_node_flags
mm: remove the prot argument to __vmalloc_node
mm: remove the pgprot argument to __vmalloc
...
Remove fault handling on vmalloc areas, as the vmalloc code now takes
care of synchronizing changes to all page-tables in the system.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lkml.kernel.org/r/20200515140023.25469-8-joro@8bytes.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull uaccess/coredump updates from Al Viro:
"set_fs() removal in coredump-related area - mostly Christoph's
stuff..."
* 'work.set_fs-exec' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
binfmt_elf_fdpic: remove the set_fs(KERNEL_DS) in elf_fdpic_core_dump
binfmt_elf: remove the set_fs(KERNEL_DS) in elf_core_dump
binfmt_elf: remove the set_fs in fill_siginfo_note
signal: refactor copy_siginfo_to_user32
powerpc/spufs: simplify spufs core dumping
powerpc/spufs: stop using access_ok
powerpc/spufs: fix copy_to_user while atomic
- Branch Target Identification (BTI)
* Support for ARMv8.5-BTI in both user- and kernel-space. This
allows branch targets to limit the types of branch from which
they can be called and additionally prevents branching to
arbitrary code, although kernel support requires a very recent
toolchain.
* Function annotation via SYM_FUNC_START() so that assembly
functions are wrapped with the relevant "landing pad"
instructions.
* BPF and vDSO updates to use the new instructions.
* Addition of a new HWCAP and exposure of BTI capability to
userspace via ID register emulation, along with ELF loader
support for the BTI feature in .note.gnu.property.
* Non-critical fixes to CFI unwind annotations in the sigreturn
trampoline.
- Shadow Call Stack (SCS)
* Support for Clang's Shadow Call Stack feature, which reserves
platform register x18 to point at a separate stack for each
task that holds only return addresses. This protects function
return control flow from buffer overruns on the main stack.
* Save/restore of x18 across problematic boundaries (user-mode,
hypervisor, EFI, suspend, etc).
* Core support for SCS, should other architectures want to use it
too.
* SCS overflow checking on context-switch as part of the existing
stack limit check if CONFIG_SCHED_STACK_END_CHECK=y.
- CPU feature detection
* Removed numerous "SANITY CHECK" errors when running on a system
with mismatched AArch32 support at EL1. This is primarily a
concern for KVM, which disabled support for 32-bit guests on
such a system.
* Addition of new ID registers and fields as the architecture has
been extended.
- Perf and PMU drivers
* Minor fixes and cleanups to system PMU drivers.
- Hardware errata
* Unify KVM workarounds for VHE and nVHE configurations.
* Sort vendor errata entries in Kconfig.
- Secure Monitor Call Calling Convention (SMCCC)
* Update to the latest specification from Arm (v1.2).
* Allow PSCI code to query the SMCCC version.
- Software Delegated Exception Interface (SDEI)
* Unexport a bunch of unused symbols.
* Minor fixes to handling of firmware data.
- Pointer authentication
* Add support for dumping the kernel PAC mask in vmcoreinfo so
that the stack can be unwound by tools such as kdump.
* Simplification of key initialisation during CPU bringup.
- BPF backend
* Improve immediate generation for logical and add/sub
instructions.
- vDSO
- Minor fixes to the linker flags for consistency with other
architectures and support for LLVM's unwinder.
- Clean up logic to initialise and map the vDSO into userspace.
- ACPI
- Work around for an ambiguity in the IORT specification relating
to the "num_ids" field.
- Support _DMA method for all named components rather than only
PCIe root complexes.
- Minor other IORT-related fixes.
- Miscellaneous
* Initialise debug traps early for KGDB and fix KDB cacheflushing
deadlock.
* Minor tweaks to early boot state (documentation update, set
TEXT_OFFSET to 0x0, increase alignment of PE/COFF sections).
* Refactoring and cleanup
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl7U9csQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNLBHCACs/YU4SM7Om5f+7QnxIKao5DBr2CnGGvdC
yTfDghFDTLQVv3MufLlfno3yBe5G8sQpcZfcc+hewfcGoMzVZXu8s7LzH6VSn9T9
jmT3KjDMrg0RjSHzyumJp2McyelTk0a4FiKArSIIKsJSXUyb1uPSgm7SvKVDwEwU
JGDzL9IGilmq59GiXfDzGhTZgmC37QdwRoRxDuqtqWQe5CHoRXYexg87HwBKOQxx
HgU9L7ehri4MRZfpyjaDrr6quJo3TVnAAKXNBh3mZAskVS9ZrfKpEH0kYWYuqybv
znKyHRecl/rrGePV8RTMtrwnSdU26zMXE/omsVVauDfG9hqzqm+Q
=w3qi
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"A sizeable pile of arm64 updates for 5.8.
Summary below, but the big two features are support for Branch Target
Identification and Clang's Shadow Call stack. The latter is currently
arm64-only, but the high-level parts are all in core code so it could
easily be adopted by other architectures pending toolchain support
Branch Target Identification (BTI):
- Support for ARMv8.5-BTI in both user- and kernel-space. This allows
branch targets to limit the types of branch from which they can be
called and additionally prevents branching to arbitrary code,
although kernel support requires a very recent toolchain.
- Function annotation via SYM_FUNC_START() so that assembly functions
are wrapped with the relevant "landing pad" instructions.
- BPF and vDSO updates to use the new instructions.
- Addition of a new HWCAP and exposure of BTI capability to userspace
via ID register emulation, along with ELF loader support for the
BTI feature in .note.gnu.property.
- Non-critical fixes to CFI unwind annotations in the sigreturn
trampoline.
Shadow Call Stack (SCS):
- Support for Clang's Shadow Call Stack feature, which reserves
platform register x18 to point at a separate stack for each task
that holds only return addresses. This protects function return
control flow from buffer overruns on the main stack.
- Save/restore of x18 across problematic boundaries (user-mode,
hypervisor, EFI, suspend, etc).
- Core support for SCS, should other architectures want to use it
too.
- SCS overflow checking on context-switch as part of the existing
stack limit check if CONFIG_SCHED_STACK_END_CHECK=y.
CPU feature detection:
- Removed numerous "SANITY CHECK" errors when running on a system
with mismatched AArch32 support at EL1. This is primarily a concern
for KVM, which disabled support for 32-bit guests on such a system.
- Addition of new ID registers and fields as the architecture has
been extended.
Perf and PMU drivers:
- Minor fixes and cleanups to system PMU drivers.
Hardware errata:
- Unify KVM workarounds for VHE and nVHE configurations.
- Sort vendor errata entries in Kconfig.
Secure Monitor Call Calling Convention (SMCCC):
- Update to the latest specification from Arm (v1.2).
- Allow PSCI code to query the SMCCC version.
Software Delegated Exception Interface (SDEI):
- Unexport a bunch of unused symbols.
- Minor fixes to handling of firmware data.
Pointer authentication:
- Add support for dumping the kernel PAC mask in vmcoreinfo so that
the stack can be unwound by tools such as kdump.
- Simplification of key initialisation during CPU bringup.
BPF backend:
- Improve immediate generation for logical and add/sub instructions.
vDSO:
- Minor fixes to the linker flags for consistency with other
architectures and support for LLVM's unwinder.
- Clean up logic to initialise and map the vDSO into userspace.
ACPI:
- Work around for an ambiguity in the IORT specification relating to
the "num_ids" field.
- Support _DMA method for all named components rather than only PCIe
root complexes.
- Minor other IORT-related fixes.
Miscellaneous:
- Initialise debug traps early for KGDB and fix KDB cacheflushing
deadlock.
- Minor tweaks to early boot state (documentation update, set
TEXT_OFFSET to 0x0, increase alignment of PE/COFF sections).
- Refactoring and cleanup"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (148 commits)
KVM: arm64: Move __load_guest_stage2 to kvm_mmu.h
KVM: arm64: Check advertised Stage-2 page size capability
arm64/cpufeature: Add get_arm64_ftr_reg_nowarn()
ACPI/IORT: Remove the unused __get_pci_rid()
arm64/cpuinfo: Add ID_MMFR4_EL1 into the cpuinfo_arm64 context
arm64/cpufeature: Add remaining feature bits in ID_AA64PFR1 register
arm64/cpufeature: Add remaining feature bits in ID_AA64PFR0 register
arm64/cpufeature: Add remaining feature bits in ID_AA64ISAR0 register
arm64/cpufeature: Add remaining feature bits in ID_MMFR4 register
arm64/cpufeature: Add remaining feature bits in ID_PFR0 register
arm64/cpufeature: Introduce ID_MMFR5 CPU register
arm64/cpufeature: Introduce ID_DFR1 CPU register
arm64/cpufeature: Introduce ID_PFR2 CPU register
arm64/cpufeature: Make doublelock a signed feature in ID_AA64DFR0
arm64/cpufeature: Drop TraceFilt feature exposure from ID_DFR0 register
arm64/cpufeature: Add explicit ftr_id_isar0[] for ID_ISAR0 register
arm64: mm: Add asid_gen_match() helper
firmware: smccc: Fix missing prototype warning for arm_smccc_version_init
arm64: vdso: Fix CFI directives in sigreturn trampoline
arm64: vdso: Don't prefix sigreturn trampoline with a BTI C instruction
...
it removes unnecessary functions and cleans up the rest.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=L8Vy
-----END PGP SIGNATURE-----
Merge tag 'x86-platform-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 platform updates from Ingo Molnar:
"This tree cleans up various aspects of the UV platform support code,
it removes unnecessary functions and cleans up the rest"
* tag 'x86-platform-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic/uv: Remove code for unused distributed GRU mode
x86/platform/uv: Remove the unused _uv_cpu_blade_processor_id() macro
x86/platform/uv: Unexport uv_apicid_hibits
x86/platform/uv: Remove _uv_hub_info_check()
x86/platform/uv: Simplify uv_send_IPI_one()
x86/platform/uv: Mark uv_min_hub_revision_id static
x86/platform/uv: Mark is_uv_hubless() static
x86/platform/uv: Remove the UV*_HUB_IS_SUPPORTED macros
x86/platform/uv: Unexport symbols only used by x2apic_uv_x.c
x86/platform/uv: Unexport sn_coherency_id
x86/platform/uv: Remove the uv_partition_coherence_id() macro
x86/platform/uv: Mark uv_bios_call() and uv_bios_call_irqsave() static
which is a feature that allows kernel-only data to be automatically
saved/restored by the FPU context switching code.
CPU features that can be supported this way are Intel PT, 'PASID' and
CET features.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=M+BC
-----END PGP SIGNATURE-----
Merge tag 'x86-fpu-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 FPU updates from Ingo Molnar:
"Most of the changes here related to 'XSAVES supervisor state' support,
which is a feature that allows kernel-only data to be automatically
saved/restored by the FPU context switching code.
CPU features that can be supported this way are Intel PT, 'PASID' and
CET features"
* tag 'x86-fpu-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu/xstate: Restore supervisor states for signal return
x86/fpu/xstate: Preserve supervisor states for the slow path in __fpu__restore_sig()
x86/fpu: Introduce copy_supervisor_to_kernel()
x86/fpu/xstate: Update copy_kernel_to_xregs_err() for supervisor states
x86/fpu/xstate: Update sanitize_restored_xstate() for supervisor xstates
x86/fpu/xstate: Define new functions for clearing fpregs and xstates
x86/fpu/xstate: Introduce XSAVES supervisor states
x86/fpu/xstate: Separate user and supervisor xfeatures mask
x86/fpu/xstate: Define new macros for supervisor and user xstates
x86/fpu/xstate: Rename validate_xstate_header() to validate_user_xstate_header()
- Extend the x86 family/model macros with a steppings dimension,
because x86 life isn't complex enough and Intel uses steppings to
differentiate between different CPUs. :-/
- Convert the TSC deadline timer quirks to the steppings macros.
- Clean up asm mnemonics.
- Fix the handling of an AMD erratum, or in other words, fix a kernel erratum.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=QKjn
-----END PGP SIGNATURE-----
Merge tag 'x86-cpu-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu updates from Ingo Molnar:
"Misc updates:
- Extend the x86 family/model macros with a steppings dimension,
because x86 life isn't complex enough and Intel uses steppings to
differentiate between different CPUs. :-/
- Convert the TSC deadline timer quirks to the steppings macros.
- Clean up asm mnemonics.
- Fix the handling of an AMD erratum, or in other words, fix a kernel
erratum"
* tag 'x86-cpu-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Use RDRAND and RDSEED mnemonics in archrandom.h
x86/cpu: Use INVPCID mnemonic in invpcid.h
x86/cpu/amd: Make erratum #1054 a legacy erratum
x86/apic: Convert the TSC deadline timer matching to steppings macro
x86/cpu: Add a X86_MATCH_INTEL_FAM6_MODEL_STEPPINGS() macro
x86/cpu: Add a steppings field to struct x86_cpu_id
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=0ZQd
-----END PGP SIGNATURE-----
Merge tag 'x86-cleanups-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Ingo Molnar:
"Misc cleanups, with an emphasis on removing obsolete/dead code"
* tag 'x86-cleanups-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/spinlock: Remove obsolete ticket spinlock macros and types
x86/mm: Drop deprecated DISCONTIGMEM support for 32-bit
x86/apb_timer: Drop unused declaration and macro
x86/apb_timer: Drop unused TSC calibration
x86/io_apic: Remove unused function mp_init_irq_at_boot()
x86/mm: Stop printing BRK addresses
x86/audit: Fix a -Wmissing-prototypes warning for ia32_classify_syscall()
x86/nmi: Remove edac.h include leftover
mm: Remove MPX leftovers
x86/mm/mmap: Fix -Wmissing-prototypes warnings
x86/early_printk: Remove unused includes
crash_dump: Remove no longer used saved_max_pfn
x86/smpboot: Remove the last ICPU() macro
- Add the initrdmem= boot option to specify an initrd embedded in RAM (flash most likely)
- Sanitize the CS value earlier during boot, which also fixes SEV-ES.
- Various fixes and smaller cleanups.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=U/uh
-----END PGP SIGNATURE-----
Merge tag 'x86-boot-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot updates from Ingo Molnar:
"Misc updates:
- Add the initrdmem= boot option to specify an initrd embedded in RAM
(flash most likely)
- Sanitize the CS value earlier during boot, which also fixes SEV-ES
- Various fixes and smaller cleanups"
* tag 'x86-boot-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Correct relocation destination on old linkers
x86/boot/compressed/64: Switch to __KERNEL_CS after GDT is loaded
x86/boot: Fix -Wint-to-pointer-cast build warning
x86/boot: Add kstrtoul() from lib/
x86/tboot: Mark tboot static
x86/setup: Add an initrdmem= option to specify initrd physical address
- Add AMD Fam17h RAPL support
- Introduce CAP_PERFMON to kernel and user space
- Add Zhaoxin CPU support
- Misc fixes and cleanups
Tooling changes:
perf record:
- Introduce --switch-output-event to use arbitrary events to be setup
and read from a side band thread and, when they take place a signal
be sent to the main 'perf record' thread, reusing the --switch-output
code to take perf.data snapshots from the --overwrite ring buffer, e.g.:
# perf record --overwrite -e sched:* \
--switch-output-event syscalls:*connect* \
workload
will take perf.data.YYYYMMDDHHMMSS snapshots up to around the
connect syscalls.
- Add --num-synthesize-threads option to control degree of parallelism of the
synthesize_mmap() code which is scanning /proc/PID/task/PID/maps and can be
time consuming. This mimics pre-existing behaviour in 'perf top'.
perf bench:
- Add a multi-threaded synthesize benchmark.
- Add kallsyms parsing benchmark.
Intel PT support:
- Stitch LBR records from multiple samples to get deeper backtraces,
there are caveats, see the csets for details.
- Allow using Intel PT to synthesize callchains for regular events.
- Add support for synthesizing branch stacks for regular events (cycles,
instructions, etc) from Intel PT data.
Misc changes:
- Updated perf vendor events for power9 and Coresight.
- Add flamegraph.py script via 'perf flamegraph'
- Misc other changes, fixes and cleanups - see the Git log for details.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=i27M
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
"Kernel side changes:
- Add AMD Fam17h RAPL support
- Introduce CAP_PERFMON to kernel and user space
- Add Zhaoxin CPU support
- Misc fixes and cleanups
Tooling changes:
- perf record:
Introduce '--switch-output-event' to use arbitrary events to be
setup and read from a side band thread and, when they take place a
signal be sent to the main 'perf record' thread, reusing the core
for '--switch-output' to take perf.data snapshots from the ring
buffer used for '--overwrite', e.g.:
# perf record --overwrite -e sched:* \
--switch-output-event syscalls:*connect* \
workload
will take perf.data.YYYYMMDDHHMMSS snapshots up to around the
connect syscalls.
Add '--num-synthesize-threads' option to control degree of
parallelism of the synthesize_mmap() code which is scanning
/proc/PID/task/PID/maps and can be time consuming. This mimics
pre-existing behaviour in 'perf top'.
- perf bench:
Add a multi-threaded synthesize benchmark and kallsyms parsing
benchmark.
- Intel PT support:
Stitch LBR records from multiple samples to get deeper backtraces,
there are caveats, see the csets for details.
Allow using Intel PT to synthesize callchains for regular events.
Add support for synthesizing branch stacks for regular events
(cycles, instructions, etc) from Intel PT data.
Misc changes:
- Updated perf vendor events for power9 and Coresight.
- Add flamegraph.py script via 'perf flamegraph'
- Misc other changes, fixes and cleanups - see the Git log for details
Also, since over the last couple of years perf tooling has matured and
decoupled from the kernel perf changes to a large degree, going
forward Arnaldo is going to send perf tooling changes via direct pull
requests"
* tag 'perf-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (163 commits)
perf/x86/rapl: Add AMD Fam17h RAPL support
perf/x86/rapl: Make perf_probe_msr() more robust and flexible
perf/x86/rapl: Flip logic on default events visibility
perf/x86/rapl: Refactor to share the RAPL code between Intel and AMD CPUs
perf/x86/rapl: Move RAPL support to common x86 code
perf/core: Replace zero-length array with flexible-array
perf/x86: Replace zero-length array with flexible-array
perf/x86/intel: Add more available bits for OFFCORE_RESPONSE of Intel Tremont
perf/x86/rapl: Add Ice Lake RAPL support
perf flamegraph: Use /bin/bash for report and record scripts
perf cs-etm: Move definition of 'traceid_list' global variable from header file
libsymbols kallsyms: Move hex2u64 out of header
libsymbols kallsyms: Parse using io api
perf bench: Add kallsyms parsing
perf: cs-etm: Update to build with latest opencsd version.
perf symbol: Fix kernel symbol address display
perf inject: Rename perf_evsel__*() operating on 'struct evsel *' to evsel__*()
perf annotate: Rename perf_evsel__*() operating on 'struct evsel *' to evsel__*()
perf trace: Rename perf_evsel__*() operating on 'struct evsel *' to evsel__*()
perf script: Rename perf_evsel__*() operating on 'struct evsel *' to evsel__*()
...
- Speed up objtool significantly, especially when there are large number of sections
- Improve objtool's understanding of special instructions such as IRET,
to reduce the number of annotations required
- Implement 'noinstr' validation
- Do baby steps for non-x86 objtool use
- Simplify/fix retpoline decoding
- Add vmlinux validation
- Improve documentation
- Fix various bugs and apply smaller cleanups
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=dbCU
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
"There are a lot of objtool changes in this cycle, all across the map:
- Speed up objtool significantly, especially when there are large
number of sections
- Improve objtool's understanding of special instructions such as
IRET, to reduce the number of annotations required
- Implement 'noinstr' validation
- Do baby steps for non-x86 objtool use
- Simplify/fix retpoline decoding
- Add vmlinux validation
- Improve documentation
- Fix various bugs and apply smaller cleanups"
* tag 'objtool-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
objtool: Enable compilation of objtool for all architectures
objtool: Move struct objtool_file into arch-independent header
objtool: Exit successfully when requesting help
objtool: Add check_kcov_mode() to the uaccess safelist
samples/ftrace: Fix asm function ELF annotations
objtool: optimize add_dead_ends for split sections
objtool: use gelf_getsymshndx to handle >64k sections
objtool: Allow no-op CFI ops in alternatives
x86/retpoline: Fix retpoline unwind
x86: Change {JMP,CALL}_NOSPEC argument
x86: Simplify retpoline declaration
x86/speculation: Change FILL_RETURN_BUFFER to work with objtool
objtool: Add support for intra-function calls
objtool: Move the IRET hack into the arch decoder
objtool: Remove INSN_STACK
objtool: Make handle_insn_ops() unconditional
objtool: Rework allocating stack_ops on decode
objtool: UNWIND_HINT_RET_OFFSET should not check registers
objtool: is_fentry_call() crashes if call has no destination
x86,smap: Fix smap_{save,restore}() alternatives
...
- RCU-tasks update, including addition of RCU Tasks Trace for
BPF use and TASKS_RUDE_RCU
- kfree_rcu() updates.
- Remove scheduler locking restriction
- RCU CPU stall warning updates.
- Torture-test updates.
- Miscellaneous fixes and other updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Yisx
-----END PGP SIGNATURE-----
Merge tag 'core-rcu-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
"The RCU updates for this cycle were:
- RCU-tasks update, including addition of RCU Tasks Trace for BPF use
and TASKS_RUDE_RCU
- kfree_rcu() updates.
- Remove scheduler locking restriction
- RCU CPU stall warning updates.
- Torture-test updates.
- Miscellaneous fixes and other updates"
* tag 'core-rcu-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (103 commits)
rcu: Allow for smp_call_function() running callbacks from idle
rcu: Provide rcu_irq_exit_check_preempt()
rcu: Abstract out rcu_irq_enter_check_tick() from rcu_nmi_enter()
rcu: Provide __rcu_is_watching()
rcu: Provide rcu_irq_exit_preempt()
rcu: Make RCU IRQ enter/exit functions rely on in_nmi()
rcu/tree: Mark the idle relevant functions noinstr
x86: Replace ist_enter() with nmi_enter()
x86/mce: Send #MC singal from task work
x86/entry: Get rid of ist_begin/end_non_atomic()
sched,rcu,tracing: Avoid tracing before in_nmi() is correct
sh/ftrace: Move arch_ftrace_nmi_{enter,exit} into nmi exception
lockdep: Always inline lockdep_{off,on}()
hardirq/nmi: Allow nested nmi_enter()
arm64: Prepare arch_nmi_enter() for recursion
printk: Disallow instrumenting print_nmi_enter()
printk: Prepare for nested printk_nmi_enter()
rcutorture: Convert ULONG_CMP_LT() to time_before()
torture: Add a --kasan argument
torture: Save a few lines by using config_override_param initially
...
their width from CPUID. As a prerequsite, streamline and unify the CPUID
detection of the respective resource control attributes. By Reinette
Chatre.
-----BEGIN PGP SIGNATURE-----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=JeAm
-----END PGP SIGNATURE-----
Merge tag 'x86_cache_updates_for_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cache resource control updates from Borislav Petkov:
"Add support for wider Memory Bandwidth Monitoring counters by querying
their width from CPUID.
As a prerequsite for that, streamline and unify the CPUID detection of
the respective resource control attributes.
By Reinette Chatre"
* tag 'x86_cache_updates_for_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Support wider MBM counters
x86/resctrl: Support CPUID enumeration of MBM counter width
x86/resctrl: Maintain MBM counter width per resource
x86/resctrl: Query LLC monitoring properties once during boot
x86/resctrl: Remove unnecessary RMID checks
x86/cpu: Move resctrl CPUID code to resctrl/
x86/resctrl: Rename asm/resctrl_sched.h to asm/resctrl.h
value from stop_machine(), from Mihai Carabas.
-----BEGIN PGP SIGNATURE-----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=g4rq
-----END PGP SIGNATURE-----
Merge tag 'x86_microcode_for_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 microcode update from Borislav Petkov:
"A single fix for late microcode loading to handle the correct return
value from stop_machine(), from Mihai Carabas"
* tag 'x86_microcode_for_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode: Fix return value for microcode late loading
Currently, APF mechanism relies on the #PF abuse where the token is being
passed through CR2. If we switch to using interrupts to deliver page-ready
notifications we need a different way to pass the data. Extent the existing
'struct kvm_vcpu_pv_apf_data' with token information for page-ready
notifications.
While on it, rename 'reason' to 'flags'. This doesn't change the semantics
as we only have reasons '1' and '2' and these can be treated as bit flags
but KVM_PV_REASON_PAGE_READY is going away with interrupt based delivery
making 'reason' name misleading.
The newly introduced apf_put_user_ready() temporary puts both flags and
token information, this will be changed to put token only when we switch
to interrupt based notifications.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200525144125.143875-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
xdp_umem.c had overlapping changes between the 64-bit math fix
for the calculation of npgs and the removal of the zerocopy
memory type which got rid of the chunk_size_nohdr member.
The mlx5 Kconfig conflict is a case where we just take the
net-next copy of the Kconfig entry dependency as it takes on
the ESWITCH dependency by one level of indirection which is
what the 'net' conflicting change is trying to ensure.
Signed-off-by: David S. Miller <davem@davemloft.net>
In the copy_process() routine called by _do_fork(), failure to allocate
a PID (or further along in the function) will trigger an invocation to
exit_thread(). This is done to clean up from an earlier call to
copy_thread_tls(). Naturally, the child task is passed into exit_thread(),
however during the process, io_bitmap_exit() nullifies the parent's
io_bitmap rather than the child's.
As copy_thread_tls() has been called ahead of the failure, the reference
count on the calling thread's io_bitmap is incremented as we would expect.
However, io_bitmap_exit() doesn't accept any arguments, and thus assumes
it should trash the current thread's io_bitmap reference rather than the
child's. This is pretty sneaky in practice, because in all instances but
this one, exit_thread() is called with respect to the current task and
everything works out.
A determined attacker can issue an appropriate ioctl (i.e. KDENABIO) to
get a bitmap allocated, and force a clone3() syscall to fail by passing
in a zeroed clone_args structure. The kernel handles the erroneous struct
and the buggy code path is followed, and even though the parent's reference
to the io_bitmap is trashed, the child still holds a reference and thus
the structure will never be freed.
Fix this by tweaking io_bitmap_exit() and its subroutines to accept a
task_struct argument which to operate on.
Fixes: ea5f1cd7ab ("x86/ioperm: Remove bitmap if all permissions dropped")
Signed-off-by: Jay Lang <jaytlang@mit.edu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable#@vger.kernel.org
Link: https://lkml.kernel.org/r/20200524162742.253727-1-jaytlang@mit.edu
Icelake microserver CPU supports split lock detection while it doesn't
have the split lock enumeration bit in IA32_CORE_CAPABILITIES. Tigerlake
CPUs do enumerate the MSR.
[ bp: Merge the two model-adding patches into one. ]
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/1588290395-2677-1-git-send-email-fenghua.yu@intel.com
copy the corresponding pieces of init_fpstate into the gaps instead.
Cc: stable@kernel.org
Tested-by: Alexander Potapenko <glider@google.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Drop the APB-timer TSC calibration, which hasn't been used since the
removal of Moorestown support by commit
1a8359e411 ("x86/mid: Remove Intel Moorestown").
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200513100944.9171-1-johan@kernel.org
The commit
c84cb3735f ("x86/apic: Move TSC deadline timer debug printk")
removed the message which said that the deadline timer was enabled.
It added a pr_debug() message which is issued when deadline timer
validation succeeds.
Well, issued only when CONFIG_DYNAMIC_DEBUG is enabled - otherwise
pr_debug() calls get optimized away if DEBUG is not defined in the
compilation unit.
Therefore, make the above message pr_info() so that it is visible in
dmesg.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200525104218.27018-1-bp@alien8.de
The MSCC bug fix in 'net' had to be slightly adjusted because the
register accesses are done slightly differently in net-next.
Signed-off-by: David S. Miller <davem@davemloft.net>
Distributed GRU mode appeared in only one generation of UV hardware,
and no version of the BIOS has shipped with this feature enabled, and
we have no plans to ever change that. The gru.s3.mode check has
always been and will continue to be false. So remove this dead code.
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Dimitri Sivanich <sivanich@hpe.com>
Link: https://lkml.kernel.org/r/20200513221123.GJ3240@raspberrypi
Normally, show_trace_log_lvl() scans the stack, looking for text
addresses to print. In parallel, it unwinds the stack with
unwind_next_frame(). If the stack address matches the pointer returned
by unwind_get_return_address_ptr() for the current frame, the text
address is printed normally without a question mark. Otherwise it's
considered a breadcrumb (potentially from a previous call path) and it's
printed with a question mark to indicate that the address is unreliable
and typically can be ignored.
Since the following commit:
f1d9a2abff ("x86/unwind/orc: Don't skip the first frame for inactive tasks")
... for inactive tasks, show_trace_log_lvl() prints *only* unreliable
addresses (prepended with '?').
That happens because, for the first frame of an inactive task,
unwind_get_return_address_ptr() returns the wrong return address
pointer: one word *below* the task stack pointer. show_trace_log_lvl()
starts scanning at the stack pointer itself, so it never finds the first
'reliable' address, causing only guesses to being printed.
The first frame of an inactive task isn't a normal stack frame. It's
actually just an instance of 'struct inactive_task_frame' which is left
behind by __switch_to_asm(). Now that this inactive frame is actually
exposed to callers, fix unwind_get_return_address_ptr() to interpret it
properly.
Fixes: f1d9a2abff ("x86/unwind/orc: Don't skip the first frame for inactive tasks")
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200522135435.vbxs7umku5pyrdbk@treble
Add PCI IDs for AMD Renoir (4000-series Ryzen CPUs). This is necessary
to enable support for temperature sensors via the k10temp module.
Signed-off-by: Alexander Monakov <amonakov@ispras.ru>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Yazen Ghannam <yazen.ghannam@amd.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lkml.kernel.org/r/20200510204842.2603-2-amonakov@ispras.ru
Changing base clock frequency directly impacts TSC Hz but not CPUID.16h
value. An overclocked CPU supporting CPUID.16h and with partial CPUID.15h
support will set TSC KHZ according to "best guess" given by CPUID.16h
relying on tsc_refine_calibration_work to give better numbers later.
tsc_refine_calibration_work will refuse to do its work when the outcome is
off the early TSC KHZ value by more than 1% which is certain to happen on
an overclocked system.
Fix this by adding a tsc_early_khz command line parameter that makes the
kernel skip early TSC calibration and use the given value instead.
This allows the user to provide the expected TSC frequency that is closer
to reality than the one reported by the hardware, enabling
tsc_refine_calibration_work to do meaningful error checking.
[ tglx: Made the variable __initdata as it's only used on init and
removed the error checking in the argument parser because
kstrto*() only stores to the variable if the string is valid ]
Signed-off-by: Krzysztof Piecuch <piecuch@protonmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/O2CpIOrqLZHgNRkfjRpz_LGqnc1ix_seNIiOCvHY4RHoulOVRo6kMXKuLOfBVTi0SMMevg6Go1uZ_cL9fLYtYdTRNH78ChaFaZyG3VAyYz8=@protonmail.com
RKL re-uses the same stolen memory registers as TGL and ICL.
Bspec: 52055
Bspec: 49589
Bspec: 49636
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504225227.464666-3-matthew.d.roper@intel.com
The async page fault injection into kernel space creates more problems than
it solves. The host has absolutely no knowledge about the state of the
guest if the fault happens in CPL0. The only restriction for the host is
interrupt disabled state. If interrupts are enabled in the guest then the
exception can hit arbitrary code. The HALT based wait in non-preemotible
code is a hacky replacement for a proper hypercall.
For the ongoing work to restrict instrumentation and make the RCU idle
interaction well defined the required extra work for supporting async
pagefault in CPL0 is just not justified and creates complexity for a
dubious benefit.
The CPL3 injection is well defined and does not cause any issues as it is
more or less the same as a regular page fault from CPL3.
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134059.369802541@linutronix.de
While working on the entry consolidation I stumbled over the KVM async page
fault handler and kvm_async_pf_task_wait() in particular. It took me a
while to realize that the randomly sprinkled around rcu_irq_enter()/exit()
invocations are just cargo cult programming. Several patches "fixed" RCU
splats by curing the symptoms without noticing that the code is flawed
from a design perspective.
The main problem is that this async injection is not based on a proper
handshake mechanism and only respects the minimal requirement, i.e. the
guest is not in a state where it has interrupts disabled.
Aside of that the actual code is a convoluted one fits it all swiss army
knife. It is invoked from different places with different RCU constraints:
1) Host side:
vcpu_enter_guest()
kvm_x86_ops->handle_exit()
kvm_handle_page_fault()
kvm_async_pf_task_wait()
The invocation happens from fully preemptible context.
2) Guest side:
The async page fault interrupted:
a) user space
b) preemptible kernel code which is not in a RCU read side
critical section
c) non-preemtible kernel code or a RCU read side critical section
or kernel code with CONFIG_PREEMPTION=n which allows not to
differentiate between #2b and #2c.
RCU is watching for:
#1 The vCPU exited and current is definitely not the idle task
#2a The #PF entry code on the guest went through enter_from_user_mode()
which reactivates RCU
#2b There is no preemptible, interrupts enabled code in the kernel
which can run with RCU looking away. (The idle task is always
non preemptible).
I.e. all schedulable states (#1, #2a, #2b) do not need any of this RCU
voodoo at all.
In #2c RCU is eventually not watching, but as that state cannot schedule
anyway there is no point to worry about it so it has to invoke
rcu_irq_enter() before running that code. This can be optimized, but this
will be done as an extra step in course of the entry code consolidation
work.
So the proper solution for this is to:
- Split kvm_async_pf_task_wait() into schedule and halt based waiting
interfaces which share the enqueueing code.
- Add comments (condensed form of this changelog) to spare others the
time waste and pain of reverse engineering all of this with the help of
uncomprehensible changelogs and code history.
- Invoke kvm_async_pf_task_wait_schedule() from kvm_handle_page_fault(),
user mode and schedulable kernel side async page faults (#1, #2a, #2b)
- Invoke kvm_async_pf_task_wait_halt() for the non schedulable kernel
case (#2c).
For this case also remove the rcu_irq_exit()/enter() pair around the
halt as it is just a pointless exercise:
- vCPUs can VMEXIT at any random point and can be scheduled out for
an arbitrary amount of time by the host and this is not any
different except that it voluntary triggers the exit via halt.
- The interrupted context could have RCU watching already. So the
rcu_irq_exit() before the halt is not gaining anything aside of
confusing the reader. Claiming that this might prevent RCU stalls
is just an illusion.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134059.262701431@linutronix.de
KVM overloads #PF to indicate two types of not-actually-page-fault
events. Right now, the KVM guest code intercepts them by modifying
the IDT and hooking the #PF vector. This makes the already fragile
fault code even harder to understand, and it also pollutes call
traces with async_page_fault and do_async_page_fault for normal page
faults.
Clean it up by moving the logic into do_page_fault() using a static
branch. This gets rid of the platform trap_init override mechanism
completely.
[ tglx: Fixed up 32bit, removed error code from the async functions and
massaged coding style ]
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134059.169270470@linutronix.de
A few exceptions (like #DB and #BP) can happen at any location in the code,
this then means that tracers should treat events from these exceptions as
NMI-like. The interrupted context could be holding locks with interrupts
disabled for instance.
Similarly, #MC is an actual NMI-like exception.
All of them use ist_enter() which only concerns itself with RCU, but does
not do any of the other setup that NMIs need. This means things like:
printk()
raw_spin_lock_irq(&logbuf_lock);
<#DB/#BP/#MC>
printk()
raw_spin_lock_irq(&logbuf_lock);
are entirely possible (well, not really since printk tries hard to
play nice, but the concept stands).
So replace ist_enter() with nmi_enter(). Also observe that any nmi_enter()
caller must be both notrace and NOKPROBE, or in the noinstr text section.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Link: https://lkml.kernel.org/r/20200505134101.525508608@linutronix.de
Convert #MC over to using task_work_add(); it will run the same code
slightly later, on the return to user path of the same exception.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Link: https://lkml.kernel.org/r/20200505134100.957390899@linutronix.de
This is completely overengineered and definitely not an interface which
should be made available to anything else than this particular MCE case.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134059.462640294@linutronix.de
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl7BzV8eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGg8EH/A2pXMTxtc96RI4S
sttEsUQqbakFS0Z/2tQPpMGr/qW2e5eHgsTX/a3SiUeZiIXk6f4lMFkMuctzBf7p
X77cNEDwGOEdbtCXTsMcmKSde7sP2zCXsPB8xTWLyE6rnaFRgikwwkeqgkIKhp1h
bvOQV0t9HNGvxGAM0iZeOvQAvFl4vd7nS123/MYbir9cugfQUSJRueQ4BiCiJqVE
6cNA7/vFzDJuFGszzIrJ7HXn/IdQMMWHkvTDjgBw0GZw1mDbGFbfbZwOeTz1ojCt
smUQ4tIFxBa/VA5zx7dOy2P2keHbSVf4VLkZRPcceT7OqVS65ETmFDp+qt5NdWM5
vZ8+7/0=
=CyYH
-----END PGP SIGNATURE-----
Merge tag 'v5.7-rc6' into objtool/core, to pick up fixes and resolve semantic conflict
Resolve structural conflict between:
59566b0b62: ("x86/ftrace: Have ftrace trampolines turn read-only at the end of system boot up")
which introduced a new reference to 'ftrace_epilogue', and:
0298739b79: ("x86,ftrace: Fix ftrace_regs_caller() unwind")
Which renamed it to 'ftrace_caller_end'. Rename the new usage site in the merge commit.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
tells the unwinding code whether a stack trace can be trusted or not is
always set correctly. This was messed up by a couple of changes in the
recent past.
-----BEGIN PGP SIGNATURE-----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=4kDr
-----END PGP SIGNATURE-----
Merge tag 'objtool-urgent-2020-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 stack unwinding fix from Thomas Gleixner:
"A single bugfix for the ORC unwinder to ensure that the error flag
which tells the unwinding code whether a stack trace can be trusted or
not is always set correctly.
This was messed up by a couple of changes in the recent past"
* tag 'objtool-urgent-2020-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/unwind/orc: Fix error handling in __unwind_start()
stack protector enabled.
-----BEGIN PGP SIGNATURE-----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=5Xi5
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Borislav Petkov:
"A single fix for early boot crashes of kernels built with gcc10 and
stack protector enabled"
* tag 'x86_urgent_for_v5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Fix early boot crash on gcc-10, third try
The signal return fast path directly restores user states from the user
buffer. Once that succeeds, restore supervisor states (but only when
they are not yet restored).
For the slow path, save supervisor states to preserve them across context
switches, and restore after the user states are restored.
The previous version has the overhead of an XSAVES in both the fast and the
slow paths. It is addressed as the following:
- In the fast path, only do an XRSTORS.
- In the slow path, do a supervisor-state-only XSAVES, and relocate the
buffer contents.
Some thoughts in the implementation:
- In the slow path, can any supervisor state become stale between
save/restore?
Answer: set_thread_flag(TIF_NEED_FPU_LOAD) protects the xstate buffer.
- In the slow path, can any code reference a stale supervisor state
register between save/restore?
Answer: In the current lazy-restore scheme, any reference to xstate
registers needs fpregs_lock()/fpregs_unlock() and __fpregs_load_activate().
- Are there other options?
One other option is eagerly restoring all supervisor states.
Currently, CET user-mode states and ENQCMD's PASID do not need to be
eagerly restored. The upcoming CET kernel-mode states (24 bytes) need
to be eagerly restored. To me, eagerly restoring all supervisor states
adds more overhead then benefit at this point.
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20200512145444.15483-11-yu-cheng.yu@intel.com
The signal return code is responsible for taking an XSAVE buffer
present in user memory and loading it into the hardware registers. This
operation only affects user XSAVE state and never affects supervisor
state.
The fast path through this code simply points XRSTOR directly at the
user buffer. However, since user memory is not guaranteed to be always
mapped, this XRSTOR can fail. If it fails, the signal return code falls
back to a slow path which can tolerate page faults.
That slow path copies the xfeatures one by one out of the user buffer
into the task's fpu state area. However, by being in a context where it
can handle page faults, the code can also schedule.
The lazy-fpu-load code would think it has an up-to-date fpstate and
would fail to save the supervisor state when scheduling the task out.
When scheduling back in, it would likely restore stale supervisor state.
To fix that, preserve supervisor state before the slow path. Modify
copy_user_to_fpregs_zeroing() so that if it fails, fpregs are not zeroed,
and there is no need for fpregs_deactivate() and supervisor states are
preserved.
Move set_thread_flag(TIF_NEED_FPU_LOAD) to the slow path. Without doing
this, the fast path also needs supervisor states to be saved first.
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200512145444.15483-10-yu-cheng.yu@intel.com
The XSAVES instruction takes a mask and saves only the features specified
in that mask. The kernel normally specifies that all features be saved.
XSAVES also unconditionally uses the "compacted format" which means that
all specified features are saved next to each other in memory. If a
feature is removed from the mask, all the features after it will "move
up" into earlier locations in the buffer.
Introduce copy_supervisor_to_kernel(), which saves only supervisor states
and then moves those states into the standard location where they are
normally found.
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200512145444.15483-9-yu-cheng.yu@intel.com
Move the bpf verifier trace check into the new switch statement in
HEAD.
Resolve the overlapping changes in hinic, where bug fixes overlap
the addition of VF support.
Signed-off-by: David S. Miller <davem@davemloft.net>
... or the odyssey of trying to disable the stack protector for the
function which generates the stack canary value.
The whole story started with Sergei reporting a boot crash with a kernel
built with gcc-10:
Kernel panic — not syncing: stack-protector: Kernel stack is corrupted in: start_secondary
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.6.0-rc5—00235—gfffb08b37df9 #139
Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./H77M—D3H, BIOS F12 11/14/2013
Call Trace:
dump_stack
panic
? start_secondary
__stack_chk_fail
start_secondary
secondary_startup_64
-—-[ end Kernel panic — not syncing: stack—protector: Kernel stack is corrupted in: start_secondary
This happens because gcc-10 tail-call optimizes the last function call
in start_secondary() - cpu_startup_entry() - and thus emits a stack
canary check which fails because the canary value changes after the
boot_init_stack_canary() call.
To fix that, the initial attempt was to mark the one function which
generates the stack canary with:
__attribute__((optimize("-fno-stack-protector"))) ... start_secondary(void *unused)
however, using the optimize attribute doesn't work cumulatively
as the attribute does not add to but rather replaces previously
supplied optimization options - roughly all -fxxx options.
The key one among them being -fno-omit-frame-pointer and thus leading to
not present frame pointer - frame pointer which the kernel needs.
The next attempt to prevent compilers from tail-call optimizing
the last function call cpu_startup_entry(), shy of carving out
start_secondary() into a separate compilation unit and building it with
-fno-stack-protector, was to add an empty asm("").
This current solution was short and sweet, and reportedly, is supported
by both compilers but we didn't get very far this time: future (LTO?)
optimization passes could potentially eliminate this, which leads us
to the third attempt: having an actual memory barrier there which the
compiler cannot ignore or move around etc.
That should hold for a long time, but hey we said that about the other
two solutions too so...
Reported-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Kalle Valo <kvalo@codeaurora.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200314164451.346497-1-slyfox@gentoo.org
The unwind_state 'error' field is used to inform the reliable unwinding
code that the stack trace can't be trusted. Set this field for all
errors in __unwind_start().
Also, move the zeroing out of the unwind_state struct to before the ORC
table initialization check, to prevent the caller from reading
uninitialized data if the ORC table is corrupted.
Fixes: af085d9084 ("stacktrace/x86: add function for detecting reliable stack traces")
Fixes: d3a0910401 ("x86/unwinder/orc: Dont bail on stack overflow")
Fixes: 98d0c8ebf7 ("x86/unwind/orc: Prevent unwinding before ORC initialization")
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/d6ac7215a84ca92b895fdd2e1aa546729417e6e6.1589487277.git.jpoimboe@redhat.com
- Fix a crash when having function tracing and function stack tracing on
the command line. The ftrace trampolines are created as executable and
read only. But the stack tracer tries to modify them with text_poke()
which expects all kernel text to still be writable at boot.
Keep the trampolines writable at boot, and convert them to read-only
with the rest of the kernel.
- A selftest was triggering in the ring buffer iterator code, that
is no longer valid with the update of keeping the ring buffer
writable while a iterator is reading. Just bail after three failed
attempts to get an event and remove the warning and disabling of the
ring buffer.
- While modifying the ring buffer code, decided to remove all the
unnecessary BUG() calls.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXr1CDhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qsXcAQCoL229SBrtHsn4DUO7eAQRppUT3hNw
RuKzvQ56+1GccQEAh8VGCeg89uMSK6imrTujEl6VmOUdbgrD5R96yiKoGQw=
=vi+k
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull more tracing fixes from Steven Rostedt:
"Various tracing fixes:
- Fix a crash when having function tracing and function stack tracing
on the command line.
The ftrace trampolines are created as executable and read only. But
the stack tracer tries to modify them with text_poke() which
expects all kernel text to still be writable at boot. Keep the
trampolines writable at boot, and convert them to read-only with
the rest of the kernel.
- A selftest was triggering in the ring buffer iterator code, that is
no longer valid with the update of keeping the ring buffer writable
while a iterator is reading.
Just bail after three failed attempts to get an event and remove
the warning and disabling of the ring buffer.
- While modifying the ring buffer code, decided to remove all the
unnecessary BUG() calls"
* tag 'trace-v5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ring-buffer: Remove all BUG() calls
ring-buffer: Don't deactivate the ring buffer on failed iterator reads
x86/ftrace: Have ftrace trampolines turn read-only at the end of system boot up
The function sanitize_restored_xstate() sanitizes user xstates of an XSAVE
buffer by clearing bits not in the input 'xfeatures' from the buffer's
header->xfeatures, effectively resetting those features back to the init
state.
When supervisor xstates are introduced, it is necessary to make sure only
user xstates are sanitized. Ensure supervisor bits in header->xfeatures
stay set and supervisor states are not modified.
To make names clear, also:
- Rename the function to sanitize_restored_user_xstate().
- Rename input parameter 'xfeatures' to 'user_xfeatures'.
- In __fpu__restore_sig(), rename 'xfeatures' to 'user_xfeatures'.
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20200512145444.15483-7-yu-cheng.yu@intel.com
Currently, fpu__clear() clears all fpregs and xstates. Once XSAVES
supervisor states are introduced, supervisor settings (e.g. CET xstates)
must remain active for signals; It is necessary to have separate functions:
- Create fpu__clear_user_states(): clear only user settings for signals;
- Create fpu__clear_all(): clear both user and supervisor settings in
flush_thread().
Also modify copy_init_fpstate_to_fpregs() to take a mask from above two
functions.
Remove obvious side-comment in fpu__clear(), while at it.
[ bp: Make the second argument of fpu__clear() bool after requesting it
a bunch of times during review.
- Add a comment about copy_init_fpstate_to_fpregs() locking needs. ]
Co-developed-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20200512145444.15483-6-yu-cheng.yu@intel.com
Enable XSAVES supervisor states by setting MSR_IA32_XSS bits according
to CPUID enumeration results. Also revise comments at various places.
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20200512145444.15483-5-yu-cheng.yu@intel.com
Before the introduction of XSAVES supervisor states, 'xfeatures_mask' is
used at various places to determine XSAVE buffer components and XCR0 bits.
It contains only user xstates. To support supervisor xstates, it is
necessary to separate user and supervisor xstates:
- First, change 'xfeatures_mask' to 'xfeatures_mask_all', which represents
the full set of bits that should ever be set in a kernel XSAVE buffer.
- Introduce xfeatures_mask_supervisor() and xfeatures_mask_user() to
extract relevant xfeatures from xfeatures_mask_all.
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20200512145444.15483-4-yu-cheng.yu@intel.com
Booting one of my machines, it triggered the following crash:
Kernel/User page tables isolation: enabled
ftrace: allocating 36577 entries in 143 pages
Starting tracer 'function'
BUG: unable to handle page fault for address: ffffffffa000005c
#PF: supervisor write access in kernel mode
#PF: error_code(0x0003) - permissions violation
PGD 2014067 P4D 2014067 PUD 2015063 PMD 7b253067 PTE 7b252061
Oops: 0003 [#1] PREEMPT SMP PTI
CPU: 0 PID: 0 Comm: swapper Not tainted 5.4.0-test+ #24
Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007
RIP: 0010:text_poke_early+0x4a/0x58
Code: 34 24 48 89 54 24 08 e8 bf 72 0b 00 48 8b 34 24 48 8b 4c 24 08 84 c0 74 0b 48 89 df f3 a4 48 83 c4 10 5b c3 9c 58 fa 48 89 df <f3> a4 50 9d 48 83 c4 10 5b e9 d6 f9 ff ff
0 41 57 49
RSP: 0000:ffffffff82003d38 EFLAGS: 00010046
RAX: 0000000000000046 RBX: ffffffffa000005c RCX: 0000000000000005
RDX: 0000000000000005 RSI: ffffffff825b9a90 RDI: ffffffffa000005c
RBP: ffffffffa000005c R08: 0000000000000000 R09: ffffffff8206e6e0
R10: ffff88807b01f4c0 R11: ffffffff8176c106 R12: ffffffff8206e6e0
R13: ffffffff824f2440 R14: 0000000000000000 R15: ffffffff8206eac0
FS: 0000000000000000(0000) GS:ffff88807d400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffa000005c CR3: 0000000002012000 CR4: 00000000000006b0
Call Trace:
text_poke_bp+0x27/0x64
? mutex_lock+0x36/0x5d
arch_ftrace_update_trampoline+0x287/0x2d5
? ftrace_replace_code+0x14b/0x160
? ftrace_update_ftrace_func+0x65/0x6c
__register_ftrace_function+0x6d/0x81
ftrace_startup+0x23/0xc1
register_ftrace_function+0x20/0x37
func_set_flag+0x59/0x77
__set_tracer_option.isra.19+0x20/0x3e
trace_set_options+0xd6/0x13e
apply_trace_boot_options+0x44/0x6d
register_tracer+0x19e/0x1ac
early_trace_init+0x21b/0x2c9
start_kernel+0x241/0x518
? load_ucode_intel_bsp+0x21/0x52
secondary_startup_64+0xa4/0xb0
I was able to trigger it on other machines, when I added to the kernel
command line of both "ftrace=function" and "trace_options=func_stack_trace".
The cause is the "ftrace=function" would register the function tracer
and create a trampoline, and it will set it as executable and
read-only. Then the "trace_options=func_stack_trace" would then update
the same trampoline to include the stack tracer version of the function
tracer. But since the trampoline already exists, it updates it with
text_poke_bp(). The problem is that text_poke_bp() called while
system_state == SYSTEM_BOOTING, it will simply do a memcpy() and not
the page mapping, as it would think that the text is still read-write.
But in this case it is not, and we take a fault and crash.
Instead, lets keep the ftrace trampolines read-write during boot up,
and then when the kernel executable text is set to read-only, the
ftrace trampolines get set to read-only as well.
Link: https://lkml.kernel.org/r/20200430202147.4dc6e2de@oasis.local.home
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: stable@vger.kernel.org
Fixes: 768ae4406a ("x86/ftrace: Use text_poke()")
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
XCNTXT_MASK is 'all supported xfeatures' before introducing supervisor
xstates. Rename it to XFEATURE_MASK_USER_SUPPORTED to make clear that
these are user xstates.
Replace XFEATURE_MASK_SUPERVISOR with the following:
- XFEATURE_MASK_SUPERVISOR_SUPPORTED: Currently nothing. ENQCMD and
Control-flow Enforcement Technology (CET) will be introduced in separate
series.
- XFEATURE_MASK_SUPERVISOR_UNSUPPORTED: Currently only Processor Trace.
- XFEATURE_MASK_SUPERVISOR_ALL: the combination of above.
Co-developed-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20200512145444.15483-3-yu-cheng.yu@intel.com
The function validate_xstate_header() validates an xstate header coming
from userspace (PTRACE or sigreturn). To make it clear, rename it to
validate_user_xstate_header().
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200512145444.15483-2-yu-cheng.yu@intel.com
- Ensure that direct mapping alias is always flushed when changing page
attributes. The optimization for small ranges failed to do so when
the virtual address was in the vmalloc or module space.
- Unbreak the trace event registration for syscalls without arguments
caused by the refactoring of the SYSCALL_DEFINE0() macro.
- Move the printk in the TSC deadline timer code to a place where it is
guaranteed to only be called once during boot and cannot be rearmed by
clearing warn_once after boot. If it's invoked post boot then lockdep
rightfully complains about a potential deadlock as the calling context
is different.
- A series of fixes for objtool and the ORC unwinder addressing variety
of small issues:
Stack offset tracking for indirect CFAs in objtool ignored subsequent
pushs and pops
Repair the unwind hints in the register clearing entry ASM code
Make the unwinding in the low level exit to usermode code stop after
switching to the trampoline stack. The unwind hint is not longer valid
and the ORC unwinder emits a warning as it can't find the registers
anymore.
Fix the unwind hints in switch_to_asm() and rewind_stack_do_exit()
which caused objtool to generate bogus ORC data.
Prevent unwinder warnings when dumping the stack of a non-current
task as there is no way to be sure about the validity because the
dumped stack can be a moving target.
Make the ORC unwinder behave the same way as the frame pointer
unwinder when dumping an inactive tasks stack and do not skip the
first frame.
Prevent ORC unwinding before ORC data has been initialized
Immediately terminate unwinding when a unknown ORC entry type is
found.
Prevent premature stop of the unwinder caused by IRET frames.
Fix another infinite loop in objtool caused by a negative offset which
was not catched.
Address a few build warnings in the ORC unwinder and add missing
static/ro_after_init annotations
-----BEGIN PGP SIGNATURE-----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=0rCi
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2020-05-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of fixes for x86:
- Ensure that direct mapping alias is always flushed when changing
page attributes. The optimization for small ranges failed to do so
when the virtual address was in the vmalloc or module space.
- Unbreak the trace event registration for syscalls without arguments
caused by the refactoring of the SYSCALL_DEFINE0() macro.
- Move the printk in the TSC deadline timer code to a place where it
is guaranteed to only be called once during boot and cannot be
rearmed by clearing warn_once after boot. If it's invoked post boot
then lockdep rightfully complains about a potential deadlock as the
calling context is different.
- A series of fixes for objtool and the ORC unwinder addressing
variety of small issues:
- Stack offset tracking for indirect CFAs in objtool ignored
subsequent pushs and pops
- Repair the unwind hints in the register clearing entry ASM code
- Make the unwinding in the low level exit to usermode code stop
after switching to the trampoline stack. The unwind hint is no
longer valid and the ORC unwinder emits a warning as it can't
find the registers anymore.
- Fix unwind hints in switch_to_asm() and rewind_stack_do_exit()
which caused objtool to generate bogus ORC data.
- Prevent unwinder warnings when dumping the stack of a
non-current task as there is no way to be sure about the
validity because the dumped stack can be a moving target.
- Make the ORC unwinder behave the same way as the frame pointer
unwinder when dumping an inactive tasks stack and do not skip
the first frame.
- Prevent ORC unwinding before ORC data has been initialized
- Immediately terminate unwinding when a unknown ORC entry type
is found.
- Prevent premature stop of the unwinder caused by IRET frames.
- Fix another infinite loop in objtool caused by a negative
offset which was not catched.
- Address a few build warnings in the ORC unwinder and add
missing static/ro_after_init annotations"
* tag 'x86-urgent-2020-05-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/unwind/orc: Move ORC sorting variables under !CONFIG_MODULES
x86/apic: Move TSC deadline timer debug printk
ftrace/x86: Fix trace event registration for syscalls without arguments
x86/mm/cpa: Flush direct map alias during cpa
objtool: Fix infinite loop in for_offset_range()
x86/unwind/orc: Fix premature unwind stoppage due to IRET frames
x86/unwind/orc: Fix error path for bad ORC entry type
x86/unwind/orc: Prevent unwinding before ORC initialization
x86/unwind/orc: Don't skip the first frame for inactive tasks
x86/unwind: Prevent false warnings for non-current tasks
x86/unwind/orc: Convert global variables to static
x86/entry/64: Fix unwind hints in rewind_stack_do_exit()
x86/entry/64: Fix unwind hints in __switch_to_asm()
x86/entry/64: Fix unwind hints in kernel exit path
x86/entry/64: Fix unwind hints in register clearing code
objtool: Fix stack offset tracking for indirect CFAs
Now that the livepatch code no longer needs the text_mutex for changing
module permissions, move its usage down to apply_relocate_add().
Note the s390 version of apply_relocate_add() doesn't need to use the
text_mutex because it already uses s390_kernel_write_lock, which
accomplishes the same task.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Because of late module patching, a livepatch module needs to be able to
apply some of its relocations well after it has been loaded. Instead of
playing games with module_{dis,en}able_ro(), use existing text poking
mechanisms to apply relocations after module loading.
So far only x86, s390 and Power have HAVE_LIVEPATCH but only the first
two also have STRICT_MODULE_RWX.
This will allow removal of the last module_disable_ro() usage in
livepatch. The ultimate goal is to completely disallow making
executable mappings writable.
[ jpoimboe: Split up patches. Use mod state to determine whether
memcpy() can be used. Implement text_poke() for UML. ]
Cc: x86@kernel.org
Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
After the previous patch, vmlinux-specific KLP relocations are now
applied early during KLP module load. This means that .klp.arch
sections are no longer needed for *vmlinux-specific* KLP relocations.
One might think they're still needed for *module-specific* KLP
relocations. If a to-be-patched module is loaded *after* its
corresponding KLP module is loaded, any corresponding KLP relocations
will be delayed until the to-be-patched module is loaded. If any
special sections (.parainstructions, for example) rely on those
relocations, their initializations (apply_paravirt) need to be done
afterwards. Thus the apparent need for arch_klp_init_object_loaded()
and its corresponding .klp.arch sections -- it allows some of the
special section initializations to be done at a later time.
But... if you look closer, that dependency between the special sections
and the module-specific KLP relocations doesn't actually exist in
reality. Looking at the contents of the .altinstructions and
.parainstructions sections, there's not a realistic scenario in which a
KLP module's .altinstructions or .parainstructions section needs to
access a symbol in a to-be-patched module. It might need to access a
local symbol or even a vmlinux symbol; but not another module's symbol.
When a special section needs to reference a local or vmlinux symbol, a
normal rela can be used instead of a KLP rela.
Since the special section initializations don't actually have any real
dependency on module-specific KLP relocations, .klp.arch and
arch_klp_init_object_loaded() no longer have a reason to exist. So
remove them.
As Peter said much more succinctly:
So the reason for .klp.arch was that .klp.rela.* stuff would overwrite
paravirt instructions. If that happens you're doing it wrong. Those
RELAs are core kernel, not module, and thus should've happened in
.rela.* sections at patch-module loading time.
Reverting this removes the two apply_{paravirt,alternatives}() calls
from the late patching path, and means we don't have to worry about
them when removing module_disable_ro().
[ jpoimboe: Rewrote patch description. Tweaked klp_init_object_loaded()
error path. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Commit
21b5ee59ef ("x86/cpu/amd: Enable the fixed Instructions Retired
counter IRPERF")
mistakenly added erratum #1054 as an OS Visible Workaround (OSVW) ID 0.
Erratum #1054 is not OSVW ID 0 [1], so make it a legacy erratum.
There would never have been a false positive on older hardware that
has OSVW bit 0 set, since the IRPERF feature was not available.
However, save a couple of RDMSR executions per thread, on modern
system configurations that correctly set non-zero values in their
OSVW_ID_Length MSRs.
[1] Revision Guide for AMD Family 17h Models 00h-0Fh Processors. The
revision guide is available from the bugzilla link below.
Fixes: 21b5ee59ef ("x86/cpu/amd: Enable the fixed Instructions Retired counter IRPERF")
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200417143356.26054-1-kim.phillips@amd.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537
TPAUSE instructs the processor to enter an implementation-dependent
optimized state. The instruction execution wakes up when the time-stamp
counter reaches or exceeds the implicit EDX:EAX 64-bit input value.
The instruction execution also wakes up due to the expiration of
the operating system time-limit or by an external interrupt
or exceptions such as a debug exception or a machine check exception.
TPAUSE offers a choice of two lower power states:
1. Light-weight power/performance optimized state C0.1
2. Improved power/performance optimized state C0.2
This way, it can save power with low wake-up latency in comparison to
spinloop based delay. The selection between the two is governed by the
input register.
TPAUSE is available on processors with X86_FEATURE_WAITPKG.
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Kyung Min Park <kyung.min.park@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/1587757076-30337-4-git-send-email-kyung.min.park@intel.com
Neither this functions nor the helpers used to implement it are used
anywhere in the kernel tree.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Not-acked-by: Dimitri Sivanich <sivanich@hpe.com>
Cc: Russ Anderson <rja@hpe.com>
Link: https://lkml.kernel.org/r/20200504171527.2845224-10-hch@lst.de
Merge two helpers only used by uv_send_IPI_one() into the main function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Not-acked-by: Dimitri Sivanich <sivanich@hpe.com>
Cc: Russ Anderson <rja@hpe.com>
Link: https://lkml.kernel.org/r/20200504171527.2845224-9-hch@lst.de
This variable is only used inside x2apic_uv_x and not even declared
in a header.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Not-acked-by: Dimitri Sivanich <sivanich@hpe.com>
Cc: Russ Anderson <rja@hpe.com>
Link: https://lkml.kernel.org/r/20200504171527.2845224-8-hch@lst.de
is_uv_hubless() is only used in x2apic_uv_x.c.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Not-acked-by: Dimitri Sivanich <sivanich@hpe.com>
Cc: Russ Anderson <rja@hpe.com>
Link: https://lkml.kernel.org/r/20200504171527.2845224-7-hch@lst.de
The single user could have called freeze_secondary_cpus() directly.
Since this function was a source of confusion, remove it as it's
just a pointless wrapper.
While at it, rename enable_nonboot_cpus() to thaw_secondary_cpus() to
preserve the naming symmetry.
Done automatically via:
git grep -l enable_nonboot_cpus | xargs sed -i 's/enable_nonboot_cpus/thaw_secondary_cpus/g'
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Link: https://lkml.kernel.org/r/20200430114004.17477-1-qais.yousef@arm.com
... and get rid of the function pointers which would spit out the
microcode revision based on the CPU stepping.
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Mark Gross <mgross.linux.intel.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200506071516.25445-4-bp@alien8.de
The original Memory Bandwidth Monitoring (MBM) architectural
definition defines counters of up to 62 bits in the
IA32_QM_CTR MSR while the first-generation MBM implementation
uses statically defined 24 bit counters.
The MBM CPUID enumeration properties have been expanded to include
the MBM counter width, encoded as an offset from 24 bits.
While eight bits are available for the counter width offset IA32_QM_CTR
MSR only supports 62 bit counters. Add a sanity check, with warning
printed when encountered, to ensure counters cannot exceed the 62 bit
limit.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/69d52abd5b14794d3a0f05ba7c755ed1f4c0d5ed.1588715690.git.reinette.chatre@intel.com
The original Memory Bandwidth Monitoring (MBM) architectural
definition defines counters of up to 62 bits in the
IA32_QM_CTR MSR while the first-generation MBM implementation
uses statically defined 24 bit counters.
Expand the MBM CPUID enumeration properties to include the MBM
counter width. The previously undefined EAX output register contains,
in bits [7:0], the MBM counter width encoded as an offset from
24 bits. Enumerating this property is only specified for Intel
CPUs.
Suggested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/afa3af2f753f6bc301fb743bc8944e749cb24afa.1588715690.git.reinette.chatre@intel.com
The original Memory Bandwidth Monitoring (MBM) architectural
definition defines counters of up to 62 bits in the IA32_QM_CTR MSR,
and the first-generation MBM implementation uses 24 bit counters.
Software is required to poll at 1 second or faster to ensure that
data is retrieved before a counter rollover occurs more than once
under worst conditions.
As system bandwidths scale the software requirement is maintained with
the introduction of a per-resource enumerable MBM counter width.
In preparation for supporting hardware with an enumerable MBM counter
width the current globally static MBM counter width is moved to a
per-resource MBM counter width. Currently initialized to 24 always
to result in no functional change.
In essence there is one function, mbm_overflow_count() that needs to
know the counter width to handle rollovers. The static value
used within mbm_overflow_count() will be replaced with a value
discovered from the hardware. Support for learning the MBM counter
width from hardware is added in the change that follows.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/e36743b9800f16ce600f86b89127391f61261f23.1588715690.git.reinette.chatre@intel.com
Cache and memory bandwidth monitoring are features that are part of
x86 CPU resource control that is supported by the resctrl subsystem.
The monitoring properties are obtained via CPUID from every CPU
and only used within the resctrl subsystem where the properties are
only read from boot_cpu_data.
Obtain the monitoring properties once, placed in boot_cpu_data, via the
->c_bsp_init() helpers of the vendors that support X86_FEATURE_CQM_LLC.
Suggested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/6d74a6ac3e69f4b7a8b4115835f9455faf0f468d.1588715690.git.reinette.chatre@intel.com
The cache and memory bandwidth monitoring properties are read using
CPUID on every CPU. After the information is read from the system a
sanity check is run to
(1) ensure that the RMID data is initialized for the boot CPU in case
the information was not available on the boot CPU and
(2) the boot CPU's RMID is set to the minimum of RMID obtained
from all CPUs.
Every known platform that supports resctrl has the same maximum RMID
on all CPUs. Both sanity checks found in x86_init_cache_qos() can thus
safely be removed.
Suggested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/c9a3b60d34091840c8b0bd1c6fab15e5ba92cb17.1588715690.git.reinette.chatre@intel.com
The function determining a platform's support and properties of cache
occupancy and memory bandwidth monitoring (properties of
X86_FEATURE_CQM_LLC) can be found among the common CPU code. After
the feature's properties is populated in the per-CPU data the resctrl
subsystem is the only consumer (via boot_cpu_data).
Move the function that obtains the CPU information used by resctrl to
the resctrl subsystem and rename it from init_cqm() to
resctrl_cpu_detect(). The function continues to be called from the
common CPU code. This move is done in preparation of the addition of some
vendor specific code.
No functional change.
Suggested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/38433b99f9d16c8f4ee796f8cc42b871531fa203.1588715690.git.reinette.chatre@intel.com
asm/resctrl_sched.h is dedicated to the code used for configuration
of the CPU resource control state when a task is scheduled.
Rename resctrl_sched.h to resctrl.h in preparation of additions that
will no longer make this file dedicated to work done during scheduling.
No functional change.
Suggested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/6914e0ef880b539a82a6d889f9423496d471ad1d.1588715690.git.reinette.chatre@intel.com
Factor out a copy_siginfo_to_external32 helper from
copy_siginfo_to_user32 that fills out the compat_siginfo, but does so
on a kernel space data structure. With that we can let architectures
override copy_siginfo_to_user32 with their own implementations using
copy_siginfo_to_external32. That allows moving the x32 SIGCHLD purely
to x86 architecture code.
As a nice side effect copy_siginfo_to_external32 also comes in handy
for avoiding a set_fs() call in the coredump code later on.
Contains improvements from Eric W. Biederman <ebiederm@xmission.com>
and Arnd Bergmann <arnd@arndb.de>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
A 32-bit version of mcelog issuing ioctls on /dev/mcelog causes errors
like the following:
MCE_GET_RECORD_LEN: Inappropriate ioctl for device
This is due to a missing compat_ioctl callback.
Assign to it compat_ptr_ioctl() as a generic implementation of the
.compat_ioctl file operation to ioctl functions that either ignore the
argument or pass a pointer to a compatible data type.
[ bp: Massage commit message. ]
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/1583303947-49858-1-git-send-email-zhe.he@windriver.com
Fix the following warnings seen with !CONFIG_MODULES:
arch/x86/kernel/unwind_orc.c:29:26: warning: 'cur_orc_table' defined but not used [-Wunused-variable]
29 | static struct orc_entry *cur_orc_table = __start_orc_unwind;
| ^~~~~~~~~~~~~
arch/x86/kernel/unwind_orc.c:28:13: warning: 'cur_orc_ip_table' defined but not used [-Wunused-variable]
28 | static int *cur_orc_ip_table = __start_orc_unwind_ip;
| ^~~~~~~~~~~~~~~~
Fixes: 153eb2223c ("x86/unwind/orc: Convert global variables to static")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linux Next Mailing List <linux-next@vger.kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200428071640.psn5m7eh3zt2in4v@treble
Leon reported that the printk_once() in __setup_APIC_LVTT() triggers a
lockdep splat due to a lock order violation between hrtimer_base::lock and
console_sem, when the 'once' condition is reset via
/sys/kernel/debug/clear_warn_once after boot.
The initial printk cannot trigger this because that happens during boot
when the local APIC timer is set up on the boot CPU.
Prevent it by moving the printk to a place which is guaranteed to be only
called once during boot.
Mark the deadline timer check related functions and data __init while at
it.
Reported-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/87y2qhoshi.fsf@nanos.tec.linutronix.de
Zhaoxin CPU has provided facilities for monitoring performance
via PMU (Performance Monitor Unit), but the functionality is unused so far.
Therefore, add support for zhaoxin pmu to make performance related
hardware events available.
The PMU is mostly an Intel Architectural PerfMon-v2 with a novel
errata for the ZXC line. It supports the following events:
-----------------------------------------------------------------------------------------------------------------------------------
Event | Event | Umask | Description
| Select | |
-----------------------------------------------------------------------------------------------------------------------------------
cpu-cycles | 82h | 00h | unhalt core clock
instructions | 00h | 00h | number of instructions at retirement.
cache-references | 15h | 05h | number of fillq pushs at the current cycle.
cache-misses | 1ah | 05h | number of l2 miss pushed by fillq.
branch-instructions | 28h | 00h | counts the number of branch instructions retired.
branch-misses | 29h | 00h | mispredicted branch instructions at retirement.
bus-cycles | 83h | 00h | unhalt bus clock
stalled-cycles-frontend | 01h | 01h | Increments each cycle the # of Uops issued by the RAT to RS.
stalled-cycles-backend | 0fh | 04h | RS0/1/2/3/45 empty
L1-dcache-loads | 68h | 05h | number of retire/commit load.
L1-dcache-load-misses | 4bh | 05h | retired load uops whose data source followed an L1 miss.
L1-dcache-stores | 69h | 06h | number of retire/commit Store,no LEA
L1-dcache-store-misses | 62h | 05h | cache lines in M state evicted out of L1D due to Snoop HitM or dirty line replacement.
L1-icache-loads | 00h | 03h | number of l1i cache access for valid normal fetch,including un-cacheable access.
L1-icache-load-misses | 01h | 03h | number of l1i cache miss for valid normal fetch,including un-cacheable miss.
L1-icache-prefetches | 0ah | 03h | number of prefetch.
L1-icache-prefetch-misses | 0bh | 03h | number of prefetch miss.
dTLB-loads | 68h | 05h | number of retire/commit load
dTLB-load-misses | 2ch | 05h | number of load operations miss all level tlbs and cause a tablewalk.
dTLB-stores | 69h | 06h | number of retire/commit Store,no LEA
dTLB-store-misses | 30h | 05h | number of store operations miss all level tlbs and cause a tablewalk.
dTLB-prefetches | 64h | 05h | number of hardware pte prefetch requests dispatched out of the prefetch FIFO.
dTLB-prefetch-misses | 65h | 05h | number of hardware pte prefetch requests miss the l1d data cache.
iTLB-load | 00h | 00h | actually counter instructions.
iTLB-load-misses | 34h | 05h | number of code operations miss all level tlbs and cause a tablewalk.
-----------------------------------------------------------------------------------------------------------------------------------
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: CodyYao-oc <CodyYao-oc@zhaoxin.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1586747669-4827-1-git-send-email-CodyYao-oc@zhaoxin.com
In order to change the {JMP,CALL}_NOSPEC macros to call out-of-line
versions of the retpoline magic, we need to remove the '%' from the
argument, such that we can paste it onto symbol names.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200428191700.151623523@infradead.org
As agreed with Boris, merge in the 'x86/asm' branch from -tip so that we
can select the new 'ARCH_USE_SYM_ANNOTATIONS' Kconfig symbol, which is
required by the BTI kernel patches.
* 'x86/asm' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Provide a Kconfig symbol for disabling old assembly annotations
x86/32: Remove CONFIG_DOUBLEFAULT
Pull in Christoph Hellwig's series that changes the sysctl's ->proc_handler
methods to take kernel pointers instead. It gets rid of the set_fs address
space overrides used by BPF. As per discussion, pull in the feature branch
into bpf-next as it relates to BPF sysctl progs.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200427071508.GV23230@ZenIV.linux.org.uk/T/
This structure is only really used in tboot.c. The only exception
is a single tboot_enabled check, but for that we don't need an inline
function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200428051703.1625952-1-hch@lst.de
Add the initrdmem option:
initrdmem=ss[KMG],nn[KMG]
which is used to specify the physical address of the initrd, almost
always an address in FLASH. Also add code for x86 to use the existing
phys_init_start and phys_init_size variables in the kernel.
This is useful in cases where a kernel and an initrd is placed in FLASH,
but there is no firmware file system structure in the FLASH.
One such situation occurs when unused FLASH space on UEFI systems has
been reclaimed by, e.g., taking it from the Management Engine. For
example, on many systems, the ME is given half the FLASH part; not only
is 2.75M of an 8M part unused; but 10.75M of a 16M part is unused. This
space can be used to contain an initrd, but need to tell Linux where it
is.
This space is "raw": due to, e.g., UEFI limitations: it can not be added
to UEFI firmware volumes without rebuilding UEFI from source or writing
a UEFI device driver. It can be referenced only as a physical address
and size.
At the same time, if a kernel can be "netbooted" or loaded from GRUB or
syslinux, the option of not using the physical address specification
should be available.
Then, it is easy to boot the kernel and provide an initrd; or boot the
the kernel and let it use the initrd in FLASH. In practice, this has
proven to be very helpful when integrating Linux into FLASH on x86.
Hence, the most flexible and convenient path is to enable the initrdmem
command line option in a way that it is the last choice tried.
For example, on the DigitalLoggers Atomic Pi, an image into FLASH can be
burnt in with a built-in command line which includes:
initrdmem=0xff968000,0x200000
which specifies a location and size.
[ bp: Massage commit message, make it passive. ]
[akpm@linux-foundation.org: coding style fixes]
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Link: http://lkml.kernel.org/r/CAP6exYLK11rhreX=6QPyDQmW7wPHsKNEFtXE47pjx41xS6O7-A@mail.gmail.com
Link: https://lkml.kernel.org/r/20200426011021.1cskg0AGd%akpm@linux-foundation.org
Instead of having all the sysctl handlers deal with user pointers, which
is rather hairy in terms of the BPF interaction, copy the input to and
from userspace in common code. This also means that the strings are
always NUL-terminated by the common code, making the API a little bit
safer.
As most handler just pass through the data to one of the common handlers
a lot of the changes are mechnical.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Modules have no business poking into this but fixing this is for later.
[ bp: Carve out from an earlier patch. ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200421092558.939985695@linutronix.de
cpu_tlbstate is exported because various TLB-related functions need access
to it, but cpu_tlbstate is sensitive information which should only be
accessed by well-contained kernel functions and not be directly exposed to
modules.
As a third step, move _flush_tlb_one_user() out of line and hide the
native function. The latter can be static when CONFIG_PARAVIRT is
disabled.
Consolidate the name space while at it and remove the pointless extra
wrapper in the paravirt code.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200421092559.428213098@linutronix.de
cpu_tlbstate is exported because various TLB-related functions need
access to it, but cpu_tlbstate is sensitive information which should
only be accessed by well-contained kernel functions and not be directly
exposed to modules.
As a second step, move __flush_tlb_global() out of line and hide the
native function. The latter can be static when CONFIG_PARAVIRT is
disabled.
Consolidate the namespace while at it and remove the pointless extra
wrapper in the paravirt code.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200421092559.336916818@linutronix.de
cpu_tlbstate is exported because various TLB-related functions need
access to it, but cpu_tlbstate is sensitive information which should
only be accessed by well-contained kernel functions and not be directly
exposed to modules.
As a first step, move __flush_tlb() out of line and hide the native
function. The latter can be static when CONFIG_PARAVIRT is disabled.
Consolidate the namespace while at it and remove the pointless extra
wrapper in the paravirt code.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200421092559.246130908@linutronix.de
The following execution path is possible:
fsnotify()
[ realign the stack and store previous SP in R10 ]
<IRQ>
[ only IRET regs saved ]
common_interrupt()
interrupt_entry()
<NMI>
[ full pt_regs saved ]
...
[ unwind stack ]
When the unwinder goes through the NMI and the IRQ on the stack, and
then sees fsnotify(), it doesn't have access to the value of R10,
because it only has the five IRET registers. So the unwind stops
prematurely.
However, because the interrupt_entry() code is careful not to clobber
R10 before saving the full regs, the unwinder should be able to read R10
from the previously saved full pt_regs associated with the NMI.
Handle this case properly. When encountering an IRET regs frame
immediately after a full pt_regs frame, use the pt_regs as a backup
which can be used to get the C register values.
Also, note that a call frame resets the 'prev_regs' value, because a
function is free to clobber the registers. For this fix to work, the
IRET and full regs frames must be adjacent, with no FUNC frames in
between. So replace the FUNC hint in interrupt_entry() with an
IRET_REGS hint.
Fixes: ee9f8fce99 ("x86/unwind: Add the ORC unwinder")
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Jones <dsj@fb.com>
Cc: Jann Horn <jannh@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lore.kernel.org/r/97a408167cc09f1cfa0de31a7b70dd88868d743f.1587808742.git.jpoimboe@redhat.com
If the ORC entry type is unknown, nothing else can be done other than
reporting an error. Exit the function instead of breaking out of the
switch statement.
Fixes: ee9f8fce99 ("x86/unwind: Add the ORC unwinder")
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Jones <dsj@fb.com>
Cc: Jann Horn <jannh@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lore.kernel.org/r/a7fa668ca6eabbe81ab18b2424f15adbbfdc810a.1587808742.git.jpoimboe@redhat.com
If the unwinder is called before the ORC data has been initialized,
orc_find() returns NULL, and it tries to fall back to using frame
pointers. This can cause some unexpected warnings during boot.
Move the 'orc_init' check from orc_find() to __unwind_init(), so that it
doesn't even try to unwind from an uninitialized state.
Fixes: ee9f8fce99 ("x86/unwind: Add the ORC unwinder")
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Jones <dsj@fb.com>
Cc: Jann Horn <jannh@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lore.kernel.org/r/069d1499ad606d85532eb32ce39b2441679667d5.1587808742.git.jpoimboe@redhat.com
When unwinding an inactive task, the ORC unwinder skips the first frame
by default. If both the 'regs' and 'first_frame' parameters of
unwind_start() are NULL, 'state->sp' and 'first_frame' are later
initialized to the same value for an inactive task. Given there is a
"less than or equal to" comparison used at the end of __unwind_start()
for skipping stack frames, the first frame is skipped.
Drop the equal part of the comparison and make the behavior equivalent
to the frame pointer unwinder.
Fixes: ee9f8fce99 ("x86/unwind: Add the ORC unwinder")
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Jones <dsj@fb.com>
Cc: Jann Horn <jannh@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lore.kernel.org/r/7f08db872ab59e807016910acdbe82f744de7065.1587808742.git.jpoimboe@redhat.com
There's some daring kernel code out there which dumps the stack of
another task without first making sure the task is inactive. If the
task happens to be running while the unwinder is reading the stack,
unusual unwinder warnings can result.
There's no race-free way for the unwinder to know whether such a warning
is legitimate, so just disable unwinder warnings for all non-current
tasks.
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Jones <dsj@fb.com>
Cc: Jann Horn <jannh@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lore.kernel.org/r/ec424a2aea1d461eb30cab48a28c6433de2ab784.1587808742.git.jpoimboe@redhat.com
These variables aren't used outside of unwind_orc.c, make them static.
Also annotate some of them with '__ro_after_init', as applicable.
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Jones <dsj@fb.com>
Cc: Jann Horn <jannh@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lore.kernel.org/r/43ae310bf7822b9862e571f36ae3474cfde8f301.1587808742.git.jpoimboe@redhat.com
The only user of these inlines is the text poke code and this must not be
exposed to the world.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200421092559.139069561@linutronix.de
cpu_tlbstate is exported because various TLB-related functions need
access to it, but cpu_tlbstate is sensitive information which should
only be accessed by well-contained kernel functions and not be directly
exposed to modules.
The various CR4 accessors require cpu_tlbstate as the CR4 shadow cache
is located there.
In preparation for unexporting cpu_tlbstate, create a builtin function
for manipulating CR4 and rework the various helpers to use it.
No functional change.
[ bp: push the export of native_write_cr4() only when CONFIG_LKTDM=m to
the last patch in the series. ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200421092558.939985695@linutronix.de
Improve readability of the function intel_set_max_freq_ratio() by moving
the check for KNL CPUs there, together with checks for GLM and SKX.
Signed-off-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lkml.kernel.org/r/20200416054745.740-5-ggherdovich@suse.cz
The static key arch_scale_freq_key only needs to be enabled once (at
boot). This change fixes a bug by which the key was enabled every time cpu0
is started, even as a secondary CPU during cpu hotplug. Secondary CPUs are
started from the idle thread: setting a static key from there means
acquiring a lock and may result in sleeping in the idle task, causing CPU
lockup.
Another consequence of this change is that init_counter_refs() is now
called on each CPU correctly; previously the function on_each_cpu() was
used, but it was called at boot when the only online cpu is cpu0.
[ggherdovich@suse.cz: Tested and wrote changelog]
Fixes: 1567c3e346 ("x86, sched: Add support for frequency invariance")
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lkml.kernel.org/r/20200416054745.740-4-ggherdovich@suse.cz
If a CPU has less than 4 physical cores, MSR_TURBO_RATIO_LIMIT will
rightfully report that the 4C turbo ratio is zero. In such cases, use the
1C turbo ratio instead for frequency invariance calculations.
Fixes: 1567c3e346 ("x86, sched: Add support for frequency invariance")
Reported-by: Like Xu <like.xu@linux.intel.com>
Reported-by: Neil Rickert <nwr10cst-oslnx@yahoo.com>
Signed-off-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Link: https://lkml.kernel.org/r/20200416054745.740-3-ggherdovich@suse.cz
Some hypervisors such as VMWare ESXi 5.5 advertise support for
X86_FEATURE_APERFMPERF but then fill all MSR's with zeroes. In particular,
MSR_PLATFORM_INFO set to zero tricks the code that wants to know the base
clock frequency of the CPU (highest non-turbo frequency), producing a
division by zero when computing the ratio turbo_freq/base_freq necessary
for frequency invariant accounting.
It is to be noted that even if MSR_PLATFORM_INFO contained the appropriate
data, APERF and MPERF are constantly zero on ESXi 5.5, thus freq-invariance
couldn't be done in principle (not that it would make a lot of sense in a
VM anyway). The real problem is advertising X86_FEATURE_APERFMPERF. This
appears to be fixed in more recent versions: ESXi 6.7 doesn't advertise
that feature.
Fixes: 1567c3e346 ("x86, sched: Add support for frequency invariance")
Signed-off-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lkml.kernel.org/r/20200416054745.740-2-ggherdovich@suse.cz
The return value from stop_machine() might not be consistent.
stop_machine_cpuslocked() returns:
- zero if all functions have returned 0.
- a non-zero value if at least one of the functions returned
a non-zero value.
There is no way to know if it is negative or positive. So make
__reload_late() return 0 on success or negative otherwise.
[ bp: Unify ret val check and touch up. ]
Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/1587497318-4438-1-git-send-email-mihai.carabas@oracle.com
'Optimize' ftrace_regs_caller. Instead of comparing against an
immediate, the more natural way to test for zero on x86 is: 'test
%r,%r'.
48 83 f8 00 cmp $0x0,%rax
74 49 je 226 <ftrace_regs_call+0xa3>
48 85 c0 test %rax,%rax
74 49 je 225 <ftrace_regs_call+0xa2>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200416115118.867411350@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There's a convenient macro for 'SS+8' called FRAME_SIZE. Use it to
clarify things.
(entry/calling.h calls this SIZEOF_PTREGS but we're using
asm/ptrace-abi.h)
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200416115118.808485515@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The ftrace_regs_caller() trampoline does something 'funny' when there
is a direct-caller present. In that case it stuffs the 'direct-caller'
address on the return stack and then exits the function. This then
results in 'returning' to the direct-caller with the exact registers
we came in with -- an indirect tail-call without using a register.
This however (rightfully) confuses objtool because the function shares
a few instruction in order to have a single exit path, but the stack
layout is different for them, depending through which path we came
there.
This is currently cludged by forcing the stack state to the non-direct
case, but this generates actively wrong (ORC) unwind information for
the direct case, leading to potential broken unwinds.
Fix this issue by fully separating the exit paths. This results in
having to poke a second RET into the trampoline copy, see
ftrace_regs_caller_ret.
This brings us to a second objtool problem, in order for it to
perceive the 'jmp ftrace_epilogue' as a function exit, it needs to be
recognised as a tail call. In order to make that happen,
ftrace_epilogue needs to be the start of an STT_FUNC, so re-arrange
code to make this so.
Finally, a third issue is that objtool requires functions to exit with
the same stack layout they started with, which is obviously violated
in the direct case, employ the new HINT_RET_OFFSET to tell objtool
this is an expected exception.
Together, this results in generating correct ORC unwind information
for the ftrace_regs_caller() function and it's trampoline copies.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200416115118.749606694@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
SRBDS is an MDS-like speculative side channel that can leak bits from the
random number generator (RNG) across cores and threads. New microcode
serializes the processor access during the execution of RDRAND and
RDSEED. This ensures that the shared buffer is overwritten before it is
released for reuse.
While it is present on all affected CPU models, the microcode mitigation
is not needed on models that enumerate ARCH_CAPABILITIES[MDS_NO] in the
cases where TSX is not supported or has been disabled with TSX_CTRL.
The mitigation is activated by default on affected processors and it
increases latency for RDRAND and RDSEED instructions. Among other
effects this will reduce throughput from /dev/urandom.
* Enable administrator to configure the mitigation off when desired using
either mitigations=off or srbds=off.
* Export vulnerability status via sysfs
* Rename file-scoped macros to apply for non-whitelist table initializations.
[ bp: Massage,
- s/VULNBL_INTEL_STEPPING/VULNBL_INTEL_STEPPINGS/g,
- do not read arch cap MSR a second time in tsx_fused_off() - just pass it in,
- flip check in cpu_set_bug_bits() to save an indentation level,
- reflow comments.
jpoimboe: s/Mitigated/Mitigation/ in user-visible strings
tglx: Dropped the fused off magic for now
]
Signed-off-by: Mark Gross <mgross@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Neelima Krishnan <neelima.krishnan@intel.com>
Intel uses the same family/model for several CPUs. Sometimes the
stepping must be checked to tell them apart.
On x86 there can be at most 16 steppings. Add a steppings bitmask to
x86_cpu_id and a X86_MATCH_VENDOR_FAMILY_MODEL_STEPPING_FEATURE macro
and support for matching against family/model/stepping.
[ bp: Massage. ]
Signed-off-by: Mark Gross <mgross@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
To make cpu_matches() reusable for other matching tables, have it take a
pointer to a x86_cpu_id table as an argument.
[ bp: Flip arguments order. ]
Signed-off-by: Mark Gross <mgross@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
objtool:
- Ignore the double UD2 which is emitted in BUG() when CONFIG_UBSAN_TRAP
is enabled.
- Support clang non-section symbols in objtool ORC dump
- Fix switch table detection in .text.unlikely
- Make the BP scratch register warning more robust.
x86:
- Increase microcode maximum patch size for AMD to cope with new CPUs
which have a larger patch size.
- Fix a crash in the resource control filesystem when the removal of the
default resource group is attempted.
- Preserve Code and Data Prioritization enabled state accross CPU
hotplug.
- Update split lock cpu matching to use the new X86_MATCH macros.
- Change the split lock enumeration as Intel finaly decided that the
IA32_CORE_CAPABILITIES bits are not architectural contrary to what
the SDM claims. !@#%$^!
- Add Tremont CPU models to the split lock detection cpu match.
- Add a missing static attribute to make sparse happy.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl6cWGsTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYod2jD/4kZqz+nEzAvx8RC/7zfLr1S6mDYcLb
kqWEblLRfPofFNO3W/1Ri7xUs2VCyBcOJeG9JIugI8YV/b/5LY9j2nW30unXi84y
8DHLWgM7OG+EiNDMvdQwgnjNb9Pdl4F1e9yTTD6IRg0bHOjvtHVyq9bNg7f3iaED
ZE4X5Hh5u4qFK/jmcsTF5HA/wIjELdmT32F4RxceAlmvpa5SUGlOfVVo1cSZpCbx
XkrvUvEzyZhbzY+Gy1q3SHTt+fvzx1++LsnJD0Dyfe5Q47PA1Iy6Zo2+Epn3FnCu
XuQKLaiDhidpkPzTGULZUsubavXbrSEu5/yhFJHyUqMy5WNOmvXBN8eVC4j1I9Ga
tnt43s3AS8noz4qIb7bpoVgETFtoCfWfqwhtZmALPzrfutwxe2Ujtsi9FUca6HtA
T5dKuNwc8G+Q5ZiNi+rPjcV/QGGncZFwtwwRwUl/YKgQ2VgrTgfsPc431tfSl3Q8
hVQIOhQNHCKqe3uGhiCsI29pNMDXVijZcI8w2SSmxnPyrMRXD7bTfLWnPav7SGFO
aSSi9HWtghkU/MsmRgRcZc9PI5bNs6w5IkfQqfXjd/lJwea2yQg1cn1KdmGi3Q33
BNj9FudNMe4K8ITaNWiLdt5rYCDIvWEzmbwawAhevstbKrjVtrAYgNAjvgJEnXAt
mZwTu+Hpd6d+JA==
=raUm
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2020-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 and objtool fixes from Thomas Gleixner:
"A set of fixes for x86 and objtool:
objtool:
- Ignore the double UD2 which is emitted in BUG() when
CONFIG_UBSAN_TRAP is enabled.
- Support clang non-section symbols in objtool ORC dump
- Fix switch table detection in .text.unlikely
- Make the BP scratch register warning more robust.
x86:
- Increase microcode maximum patch size for AMD to cope with new CPUs
which have a larger patch size.
- Fix a crash in the resource control filesystem when the removal of
the default resource group is attempted.
- Preserve Code and Data Prioritization enabled state accross CPU
hotplug.
- Update split lock cpu matching to use the new X86_MATCH macros.
- Change the split lock enumeration as Intel finaly decided that the
IA32_CORE_CAPABILITIES bits are not architectural contrary to what
the SDM claims. !@#%$^!
- Add Tremont CPU models to the split lock detection cpu match.
- Add a missing static attribute to make sparse happy"
* tag 'x86-urgent-2020-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/split_lock: Add Tremont family CPU models
x86/split_lock: Bits in IA32_CORE_CAPABILITIES are not architectural
x86/resctrl: Preserve CDP enable over CPU hotplug
x86/resctrl: Fix invalid attempt at removing the default resource group
x86/split_lock: Update to use X86_MATCH_INTEL_FAM6_MODEL()
x86/umip: Make umip_insns static
x86/microcode/AMD: Increase microcode PATCH_MAX_SIZE
objtool: Make BP scratch register warning more robust
objtool: Fix switch table detection in .text.unlikely
objtool: Support Clang non-section symbols in ORC generation
objtool: Support Clang non-section symbols in ORC dump
objtool: Fix CONFIG_UBSAN_TRAP unreachable warnings
Tremont CPUs support IA32_CORE_CAPABILITIES bits to indicate whether
specific SKUs have support for split lock detection.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200416205754.21177-4-tony.luck@intel.com
The Intel Software Developers' Manual erroneously listed bit 5 of the
IA32_CORE_CAPABILITIES register as an architectural feature. It is not.
Features enumerated by IA32_CORE_CAPABILITIES are model specific and
implementation details may vary in different cpu models. Thus it is only
safe to trust features after checking the CPU model.
Icelake client and server models are known to implement the split lock
detect feature even though they don't enumerate IA32_CORE_CAPABILITIES
[ tglx: Use switch() for readability and massage comments ]
Fixes: 6650cdd9a8 ("x86/split_lock: Enable split lock detection by kernel")
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200416205754.21177-3-tony.luck@intel.com
After
1bd187de53 ("x86, intel-mid: remove Intel MID specific serial support")
the Intel MID header is not needed anymore.
After
69c1f396f2 ("efi/x86: Convert x86 EFI earlyprintk into generic earlycon implementation")
the EFI headers are not needed anymore.
Remove the respective includes.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200326175415.8618-1-andriy.shevchenko@linux.intel.com
Resctrl assumes that all CPUs are online when the filesystem is mounted,
and that CPUs remember their CDP-enabled state over CPU hotplug.
This goes wrong when resctrl's CDP-enabled state changes while all the
CPUs in a domain are offline.
When a domain comes online, enable (or disable!) CDP to match resctrl's
current setting.
Fixes: 5ff193fbde ("x86/intel_rdt: Add basic resctrl filesystem support")
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200221162105.154163-1-james.morse@arm.com
The default resource group ("rdtgroup_default") is associated with the
root of the resctrl filesystem and should never be removed. New resource
groups can be created as subdirectories of the resctrl filesystem and
they can be removed from user space.
There exists a safeguard in the directory removal code
(rdtgroup_rmdir()) that ensures that only subdirectories can be removed
by testing that the directory to be removed has to be a child of the
root directory.
A possible deadlock was recently fixed with
334b0f4e9b ("x86/resctrl: Fix a deadlock due to inaccurate reference").
This fix involved associating the private data of the "mon_groups"
and "mon_data" directories to the resource group to which they belong
instead of NULL as before. A consequence of this change was that
the original safeguard code preventing removal of "mon_groups" and
"mon_data" found in the root directory failed resulting in attempts to
remove the default resource group that ends in a BUG:
kernel BUG at mm/slub.c:3969!
invalid opcode: 0000 [#1] SMP PTI
Call Trace:
rdtgroup_rmdir+0x16b/0x2c0
kernfs_iop_rmdir+0x5c/0x90
vfs_rmdir+0x7a/0x160
do_rmdir+0x17d/0x1e0
do_syscall_64+0x55/0x1d0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fix this by improving the directory removal safeguard to ensure that
subdirectories of the resctrl root directory can only be removed if they
are a child of the resctrl filesystem's root _and_ not associated with
the default resource group.
Fixes: 334b0f4e9b ("x86/resctrl: Fix a deadlock due to inaccurate reference")
Reported-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/884cbe1773496b5dbec1b6bd11bb50cffa83603d.1584461853.git.reinette.chatre@intel.com
The SPLIT_LOCK_CPU() macro escaped the tree-wide sweep for old-style
initialization. Update to use X86_MATCH_INTEL_FAM6_MODEL().
Fixes: 6650cdd9a8 ("x86/split_lock: Enable split lock detection by kernel")
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200416205754.21177-2-tony.luck@intel.com
saved_max_pfn was originally introduced in commit
92aa63a5a1 ("[PATCH] kdump: Retrieve saved max pfn")
It used to make sure that the user does not try to read the physical memory
beyond saved_max_pfn. But since commit
921d58c0e6 ("vmcore: remove saved_max_pfn check")
it's no longer used for the check. This variable doesn't have any users
anymore so just remove it.
[ bp: Drop the Calgary IOMMU reference from the commit message. ]
Signed-off-by: Kairui Song <kasong@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Link: https://lkml.kernel.org/r/20200330181544.1595733-1-kasong@redhat.com
Fix the following sparse warning:
arch/x86/kernel/umip.c:84:12: warning: symbol 'umip_insns' was not declared.
Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Link: https://lkml.kernel.org/r/20200413082213.22934-1-yanaijie@huawei.com
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAl6ViNsTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXuXIB/4nuYRCt4d/XaeHF6dCWU45ThG+tNs7
p/OnBPZmknI0SnZ4uR/XW5caHEFj7g9ndYh+M1afZ/zKdsc+syMSDT5XhuhC/GKV
fQRW0qO8N+IAqXbLzJxyBg6fH2anwfe3w2uy2cKDEZk6d4FD5atTWhRY6R4ISq0l
g7pUyvQN1q+G6KH2snmOaZL8mybFkbHrmwtAZzcjzdzqasdLFiQB8EEFkONG66t9
HeNTyUF0mnbGBIePQLSZSHLj5p4yHG/9pa3jgqO5dsmIdsBvoaVNqEi3pCm1s/5n
BH9FWn6fTwpcKvtF385yzBiFFlzBVgXbetxuSmxxOkWW4P+db5B/GL2Y
=fjSF
-----END PGP SIGNATURE-----
Merge tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- a series from Tianyu Lan to fix crash reporting on Hyper-V
- three miscellaneous cleanup patches
* tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/Hyper-V: Report crash data in die() when panic_on_oops is set
x86/Hyper-V: Report crash register data when sysctl_record_panic_msg is not set
x86/Hyper-V: Report crash register data or kmsg before running crash kernel
x86/Hyper-V: Trigger crash enlightenment only once during system crash.
x86/Hyper-V: Free hv_panic_page when fail to register kmsg dump
x86/Hyper-V: Unload vmbus channel in hv panic callback
x86: hyperv: report value of misc_features
hv_debugfs: Make hv_debug_root static
hv: hyperv_vmbus.h: Replace zero-length array with flexible-array member
The severity grading code returns IN_KERNEL_RECOV error context for
errors which have happened in kernel space but from which the kernel can
recover. Whether the recovery can happen is determined by the exception
table entry having as handler ex_handler_fault() and which has been
declared at build time using _ASM_EXTABLE_FAULT().
IN_KERNEL_RECOV is used in mce_severity_intel() to lookup the
corresponding error severity in the severities table.
However, the mapping back from error severity to whether the error is
IN_KERNEL_RECOV is ambiguous and in the very paranoid case - which
might not be possible right now - but be better safe than sorry later,
an exception fixup could be attempted for another MCE whose address
is in the exception table and has the proper severity. Which would be
unfortunate, to say the least.
Therefore, mark such MCEs explicitly as MCE_IN_KERNEL_RECOV so that the
recovery attempt is done only for them.
Document the whole handling, while at it, as it is not trivial.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20200407163414.18058-10-bp@alien8.de
Sometimes, when logs are getting lost, it's nice to just
have everything dumped to the serial console.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20200214222720.13168-7-tony.luck@intel.com
Instead of keeping count of how many handlers are registered on the
MCE notifier chain and printing if below some magic value, look at
mce->kflags to see if anyone claims to have handled/logged this error.
[ bp: Do not print ->kflags in __print_mce(). ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20200214222720.13168-6-tony.luck@intel.com
If the handler took any action to log or deal with the error, set a bit
in mce->kflags so that the default handler on the end of the machine
check chain can see what has been done.
Get rid of NOTIFY_STOP returns. Make the EDAC and dev-mcelog handlers
skip over errors already processed by CEC.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20200214222720.13168-5-tony.luck@intel.com
The CEC code has its claws in a couple of routines in mce/core.c.
Convert it to just register itself on the normal MCE notifier chain.
[ bp: Make cec_add_elem() and cec_init() static. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20200214222720.13168-3-tony.luck@intel.com
It isn't going to be first on the notifier chain when the CEC is moved
to be a normal user of the notifier chain.
Fix the enum for the MCE_PRIO symbols to list them in reverse order so
that the compiler can give them numbers from low to high priority. Add
an entry for MCE_PRIO_CEC as the highest priority.
[ bp: Use passive voice, add comments. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20200214222720.13168-2-tony.luck@intel.com
... because no one should be interested in spurious MCEs anyway. Make
the filtering unconditional and move it to amd_filter_mce().
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20200407163414.18058-2-bp@alien8.de
Handle the cases when the CPU goes offline before the bank
setting/reading happens.
[ bp: Write commit message. ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200403161943.1458-8-bp@alien8.de
Pass in the bank pointer directly to the cleaning up functions,
obviating the need for per-CPU accesses. Make the clean up path
interrupt-safe by cleaning the bank pointer first so that the rest of
the teardown happens safe from the thresholding interrupt.
No functional changes.
[ bp: Write commit message and reverse bank->shared test to save an
indentation level in threshold_remove_bank(). ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200403161943.1458-7-bp@alien8.de
mce_threshold_create_device() hotplug callback runs on the plugged in
CPU so:
- use this_cpu_read() which is faster
- pass in struct threshold_bank **bp to threshold_create_bank() and
instead of doing per-CPU accesses
- Use rdmsr_safe() instead of rdmsr_safe_on_cpu() which avoids an IPI.
No functional changes.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200403161943.1458-6-bp@alien8.de
Drop the stupid threshold_init_device() initcall iterating over all
online CPUs in favor of properly setting up everything on the CPU
hotplug path, when each CPU's callback is invoked.
[ bp: Write commit message. ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200403161943.1458-5-bp@alien8.de
Make sure the thresholding bank descriptor is fully initialized when the
thresholding interrupt fires after a hotplug event.
[ bp: Write commit message and document long-forgotten bank_map. ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200403161943.1458-4-bp@alien8.de
Drop kobject reference counts properly on error in the banks and blocks
allocation functions.
[ bp: Write commit message. ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200403161943.1458-2-bp@alien8.de
Make the doublefault exception handler unconditional on 32-bit. Yes,
it is important to be able to catch #DF exceptions instead of silent
reboots. Yes, the code size increase is worth every byte. And one less
CONFIG symbol is just the cherry on top.
No functional changes.
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200404083646.8897-1-bp@alien8.de
Now all is using the shiny new macros.
No code changed:
# arch/x86/kernel/smpboot.o:
text data bss dec hex filename
16432 2649 40 19121 4ab1 smpboot.o.before
16432 2649 40 19121 4ab1 smpboot.o.after
md5:
a58104003b72c1de533095bc5a4c30a9 smpboot.o.before.asm
a58104003b72c1de533095bc5a4c30a9 smpboot.o.after.asm
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200324185836.GI22931@zn.tnic
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl6TbaUeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGhgkH/iWpiKvosA20HJjC
rBqYeJPxQsgZTuBieWJ+MeVxbpcF7RlM4c+glyvg3QJhHwIEG58dl6LBrQbAyBAR
aFHNojr1iAYOruVCGnU3pA008YZiwUIDv/ZQ4DF8fmIU2vI2mJ6qHBv3XDl4G2uR
Nwz8Eu9AgIwZM5coomVOSmoWyFy7Vxmb7W+3t5VmKsvOWx4ib9kyQtOIkvQDEl7j
XCbWfI0xDQr6LFOm4jnCi5R/LhJ2LIqqIvHHrunbpszM8IwK797jCXz4im+dmd5Y
+km46N7a8pDqri36xXz1gdBAU3eG7Pt1NyvfjwRVTdX4GquQ2MT0GoojxbLxUP3y
3pEsQuE=
=whbL
-----END PGP SIGNATURE-----
Merge tag 'v5.7-rc1' into locking/kcsan, to resolve conflicts and refresh
Resolve these conflicts:
arch/x86/Kconfig
arch/x86/kernel/Makefile
Do a minor "evil merge" to move the KCSAN entry up a bit by a few lines
in the Kconfig to reduce the probability of future conflicts.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We want to notify Hyper-V when a Linux guest VM crash occurs, so
there is a record of the crash even when kdump is enabled. But
crash_kexec_post_notifiers defaults to "false", so the kdump kernel
runs before the notifiers and Hyper-V never gets notified. Fix this by
always setting crash_kexec_post_notifiers to be true for Hyper-V VMs.
Fixes: 81b18bce48 ("Drivers: HV: Send one page worth of kmsg dump over Hyper-V during panic")
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lore.kernel.org/r/20200406155331.2105-5-Tianyu.Lan@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Without at least minimal handling for split lock detection induced #AC,
VMX will just run into the same problem as the VMWare hypervisor, which
was reported by Kenneth.
It will inject the #AC blindly into the guest whether the guest is
prepared or not.
Provide a function for guest mode which acts depending on the host
SLD mode. If mode == sld_warn, treat it like user space, i.e. emit a
warning, disable SLD and mark the task accordingly. Otherwise force
SIGBUS.
[ bp: Add a !CPU_SUP_INTEL stub for handle_guest_split_lock(). ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lkml.kernel.org/r/20200410115516.978037132@linutronix.de
Link: https://lkml.kernel.org/r/20200402123258.895628824@linutronix.de
Merge yet more updates from Andrew Morton:
- Almost all of the rest of MM (memcg, slab-generic, slab, pagealloc,
gup, hugetlb, pagemap, memremap)
- Various other things (hfs, ocfs2, kmod, misc, seqfile)
* akpm: (34 commits)
ipc/util.c: sysvipc_find_ipc() should increase position index
kernel/gcov/fs.c: gcov_seq_next() should increase position index
fs/seq_file.c: seq_read(): add info message about buggy .next functions
drivers/dma/tegra20-apb-dma.c: fix platform_get_irq.cocci warnings
change email address for Pali Rohár
selftests: kmod: test disabling module autoloading
selftests: kmod: fix handling test numbers above 9
docs: admin-guide: document the kernel.modprobe sysctl
fs/filesystems.c: downgrade user-reachable WARN_ONCE() to pr_warn_once()
kmod: make request_module() return an error when autoloading is disabled
mm/memremap: set caching mode for PCI P2PDMA memory to WC
mm/memory_hotplug: add pgprot_t to mhp_params
powerpc/mm: thread pgprot_t through create_section_mapping()
x86/mm: introduce __set_memory_prot()
x86/mm: thread pgprot_t through init_memory_mapping()
mm/memory_hotplug: rename mhp_restrictions to mhp_params
mm/memory_hotplug: drop the flags field from struct mhp_restrictions
mm/special: create generic fallbacks for pte_special() and pte_mkspecial()
mm/vma: introduce VM_ACCESS_FLAGS
mm/vma: define a default value for VM_DATA_DEFAULT_FLAGS
...
In preparation to support a pgprot_t argument for arch_add_memory().
It's required to move the prototype of init_memory_mapping() seeing the
original location came before the definition of pgprot_t.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Eric Badger <ebadger@gigaio.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200306170846.9333-4-logang@deltatee.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 944d9fec8d ("hugetlb: add support for gigantic page allocation
at runtime") has added the run-time allocation of gigantic pages.
However it actually works only at early stages of the system loading,
when the majority of memory is free. After some time the memory gets
fragmented by non-movable pages, so the chances to find a contiguous 1GB
block are getting close to zero. Even dropping caches manually doesn't
help a lot.
At large scale rebooting servers in order to allocate gigantic hugepages
is quite expensive and complex. At the same time keeping some constant
percentage of memory in reserved hugepages even if the workload isn't
using it is a big waste: not all workloads can benefit from using 1 GB
pages.
The following solution can solve the problem:
1) On boot time a dedicated cma area* is reserved. The size is passed
as a kernel argument.
2) Run-time allocations of gigantic hugepages are performed using the
cma allocator and the dedicated cma area
In this case gigantic hugepages can be allocated successfully with a
high probability, however the memory isn't completely wasted if nobody
is using 1GB hugepages: it can be used for pagecache, anon memory, THPs,
etc.
* On a multi-node machine a per-node cma area is allocated on each node.
Following gigantic hugetlb allocation are using the first available
numa node if the mask isn't specified by a user.
Usage:
1) configure the kernel to allocate a cma area for hugetlb allocations:
pass hugetlb_cma=10G as a kernel argument
2) allocate hugetlb pages as usual, e.g.
echo 10 > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages
If the option isn't enabled or the allocation of the cma area failed,
the current behavior of the system is preserved.
x86 and arm-64 are covered by this patch, other architectures can be
trivially added later.
The patch contains clean-ups and fixes proposed and implemented by Aslan
Bakirov and Randy Dunlap. It also contains ideas and suggestions
proposed by Rik van Riel, Michal Hocko and Mike Kravetz. Thanks!
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Andreas Schaufler <andreas.schaufler@gmx.de>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Aslan Bakirov <aslan@fb.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Link: http://lkml.kernel.org/r/20200407163840.92263-3-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A few kernel features depend on ms_hyperv.misc_features, but unlike its
siblings ->features and ->hints, the value was never reported during boot.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Link: https://lore.kernel.org/r/20200407172739.31371-1-olaf@aepfle.de
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Fix the following sparse warning:
arch/x86/kernel/acpi/boot.c:48:5: warning: symbol 'acpi_nobgrt' was not
declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Update the ACPICA code in the kernel to upstream revision 20200326
including:
* Fix for a typo in a comment field (Bob Moore).
* acpiExec namespace init file fixes (Bob Moore).
* Addition of NHLT to the known tables list (Cezary Rojewski).
* Conversion of PlatformCommChannel ASL keyword to PCC (Erik
Kaneda).
* acpiexec cleanup (Erik Kaneda).
* WSMT-related typo fix (Erik Kaneda).
* sprintf() utility function fix (John Levon).
* IVRS IVHD type 11h parsing implementation (Michał Żygowski).
* IVRS IVHD type 10h reserved field name fix (Michał Żygowski).
- Fix ACPI-related CPU hotplug deadlock on x86 (Qian Cai).
- Fix Intel Tiger Lake ACPI device IDs in several places (Gayatri
Kammela).
- Add ACPI backlight blacklist entry for Acer Aspire 5783z (Hans
de Goede).
- Fix documentation of the "acpi_backlight" kernel command line
switch (Randy Dunlap).
- Clean up the acpi_get_psd_map() CPPC library routine (Liguang
Zhang).
-----BEGIN PGP SIGNATURE-----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=b3Dp
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"Additional ACPI updates.
These update the ACPICA code in the kernel to the 20200326 upstream
revision, fix an ACPI-related CPU hotplug deadlock on x86, update
Intel Tiger Lake device IDs in some places, add a new ACPI backlight
blacklist entry, update the "acpi_backlight" kernel command line
switch documentation and clean up a CPPC library routine.
Specifics:
- Update the ACPICA code in the kernel to upstream revision 20200326
including:
* Fix for a typo in a comment field (Bob Moore)
* acpiExec namespace init file fixes (Bob Moore)
* Addition of NHLT to the known tables list (Cezary Rojewski)
* Conversion of PlatformCommChannel ASL keyword to PCC (Erik
Kaneda)
* acpiexec cleanup (Erik Kaneda)
* WSMT-related typo fix (Erik Kaneda)
* sprintf() utility function fix (John Levon)
* IVRS IVHD type 11h parsing implementation (Michał Żygowski)
* IVRS IVHD type 10h reserved field name fix (Michał Żygowski)
- Fix ACPI-related CPU hotplug deadlock on x86 (Qian Cai)
- Fix Intel Tiger Lake ACPI device IDs in several places (Gayatri
Kammela)
- Add ACPI backlight blacklist entry for Acer Aspire 5783z (Hans de
Goede)
- Fix documentation of the "acpi_backlight" kernel command line
switch (Randy Dunlap)
- Clean up the acpi_get_psd_map() CPPC library routine (Liguang
Zhang)"
* tag 'acpi-5.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
x86: ACPI: fix CPU hotplug deadlock
thermal: int340x_thermal: fix: Update Tiger Lake ACPI device IDs
platform/x86: intel-hid: fix: Update Tiger Lake ACPI device ID
ACPI: Update Tiger Lake ACPI device IDs
ACPI: video: Use native backlight on Acer Aspire 5783z
ACPI: video: Docs update for "acpi_backlight" kernel parameter options
ACPICA: Update version 20200326
ACPICA: Fixes for acpiExec namespace init file
ACPICA: Add NHLT table signature
ACPICA: WSMT: Fix typo, no functional change
ACPICA: utilities: fix sprintf()
ACPICA: acpiexec: remove redeclaration of acpi_gbl_db_opt_no_region_support
ACPICA: Change PlatformCommChannel ASL keyword to PCC
ACPICA: Fix IVRS IVHD type 10h reserved field name
ACPICA: Implement IVRS IVHD type 11h parsing
ACPICA: Fix a typo in a comment field
ACPI: CPPC: clean up acpi_get_psd_map()
Similar to commit 0266d81e9b ("acpi/processor: Prevent cpu hotplug
deadlock") except this is for acpi_processor_ffh_cstate_probe():
"The problem is that the work is scheduled on the current CPU from the
hotplug thread associated with that CPU.
It's not required to invoke these functions via the workqueue because
the hotplug thread runs on the target CPU already.
Check whether current is a per cpu thread pinned on the target CPU and
invoke the function directly to avoid the workqueue."
WARNING: possible circular locking dependency detected
------------------------------------------------------
cpuhp/1/15 is trying to acquire lock:
ffffc90003447a28 ((work_completion)(&wfc.work)){+.+.}-{0:0}, at: __flush_work+0x4c6/0x630
but task is already holding lock:
ffffffffafa1c0e8 (cpuidle_lock){+.+.}-{3:3}, at: cpuidle_pause_and_lock+0x17/0x20
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (cpu_hotplug_lock){++++}-{0:0}:
cpus_read_lock+0x3e/0xc0
irq_calc_affinity_vectors+0x5f/0x91
__pci_enable_msix_range+0x10f/0x9a0
pci_alloc_irq_vectors_affinity+0x13e/0x1f0
pci_alloc_irq_vectors_affinity at drivers/pci/msi.c:1208
pqi_ctrl_init+0x72f/0x1618 [smartpqi]
pqi_pci_probe.cold.63+0x882/0x892 [smartpqi]
local_pci_probe+0x7a/0xc0
work_for_cpu_fn+0x2e/0x50
process_one_work+0x57e/0xb90
worker_thread+0x363/0x5b0
kthread+0x1f4/0x220
ret_from_fork+0x27/0x50
-> #0 ((work_completion)(&wfc.work)){+.+.}-{0:0}:
__lock_acquire+0x2244/0x32a0
lock_acquire+0x1a2/0x680
__flush_work+0x4e6/0x630
work_on_cpu+0x114/0x160
acpi_processor_ffh_cstate_probe+0x129/0x250
acpi_processor_evaluate_cst+0x4c8/0x580
acpi_processor_get_power_info+0x86/0x740
acpi_processor_hotplug+0xc3/0x140
acpi_soft_cpu_online+0x102/0x1d0
cpuhp_invoke_callback+0x197/0x1120
cpuhp_thread_fun+0x252/0x2f0
smpboot_thread_fn+0x255/0x440
kthread+0x1f4/0x220
ret_from_fork+0x27/0x50
other info that might help us debug this:
Chain exists of:
(work_completion)(&wfc.work) --> cpuhp_state-up --> cpuidle_lock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(cpuidle_lock);
lock(cpuhp_state-up);
lock(cpuidle_lock);
lock((work_completion)(&wfc.work));
*** DEADLOCK ***
3 locks held by cpuhp/1/15:
#0: ffffffffaf51ab10 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x69/0x2f0
#1: ffffffffaf51ad40 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x69/0x2f0
#2: ffffffffafa1c0e8 (cpuidle_lock){+.+.}-{3:3}, at: cpuidle_pause_and_lock+0x17/0x20
Call Trace:
dump_stack+0xa0/0xea
print_circular_bug.cold.52+0x147/0x14c
check_noncircular+0x295/0x2d0
__lock_acquire+0x2244/0x32a0
lock_acquire+0x1a2/0x680
__flush_work+0x4e6/0x630
work_on_cpu+0x114/0x160
acpi_processor_ffh_cstate_probe+0x129/0x250
acpi_processor_evaluate_cst+0x4c8/0x580
acpi_processor_get_power_info+0x86/0x740
acpi_processor_hotplug+0xc3/0x140
acpi_soft_cpu_online+0x102/0x1d0
cpuhp_invoke_callback+0x197/0x1120
cpuhp_thread_fun+0x252/0x2f0
smpboot_thread_fn+0x255/0x440
kthread+0x1f4/0x220
ret_from_fork+0x27/0x50
Signed-off-by: Qian Cai <cai@lca.pw>
Tested-by: Borislav Petkov <bp@suse.de>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Here are 3 SPDX patches for 5.7-rc1.
One fixes up the SPDX tag for a single driver, while the other two go
through the tree and add SPDX tags for all of the .gitignore files as
needed.
Nothing too complex, but you will get a merge conflict with your current
tree, that should be trivial to handle (one file modified by two things,
one file deleted.)
All 3 of these have been in linux-next for a while, with no reported
issues other than the merge conflict.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXodg5A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykySQCgy9YDrkz7nWq6v3Gohl6+lW/L+rMAnRM4uTZm
m5AuCzO3Azt9KBi7NL+L
=2Lm5
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here are three SPDX patches for 5.7-rc1.
One fixes up the SPDX tag for a single driver, while the other two go
through the tree and add SPDX tags for all of the .gitignore files as
needed.
Nothing too complex, but you will get a merge conflict with your
current tree, that should be trivial to handle (one file modified by
two things, one file deleted.)
All three of these have been in linux-next for a while, with no
reported issues other than the merge conflict"
* tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
ASoC: MT6660: make spdxcheck.py happy
.gitignore: add SPDX License Identifier
.gitignore: remove too obvious comments
Pull integrity updates from Mimi Zohar:
"Just a couple of updates for linux-5.7:
- A new Kconfig option to enable IMA architecture specific runtime
policy rules needed for secure and/or trusted boot, as requested.
- Some message cleanup (eg. pr_fmt, additional error messages)"
* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: add a new CONFIG for loading arch-specific policies
integrity: Remove duplicate pr_fmt definitions
IMA: Add log statements for failure conditions
IMA: Update KBUILD_MODNAME for IMA files to ima
Pull x86 vmware updates from Ingo Molnar:
"The main change in this tree is the addition of 'steal time clock
support' for VMware guests"
* 'x86-vmware-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vmware: Use bool type for vmw_sched_clock
x86/vmware: Enable steal time accounting
x86/vmware: Add steal time clock support for VMware guests
x86/vmware: Remove vmware_sched_clock_setup()
x86/vmware: Make vmware_select_hypercall() __init
Pull x86 fpu updates from Ingo Molnar:
"Misc changes:
- add a pkey sanity check
- three commits to improve and future-proof xstate/xfeature handling
some more"
* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/pkeys: Add check for pkey "overflow"
x86/fpu/xstate: Warn when checking alignment of disabled xfeatures
x86/fpu/xstate: Fix XSAVES offsets in setup_xstate_comp()
x86/fpu/xstate: Fix last_good_offset in setup_xstate_features()
Pull x86 cleanups from Ingo Molnar:
"This topic tree contains more commits than usual:
- most of it are uaccess cleanups/reorganization by Al
- there's a bunch of prototype declaration (--Wmissing-prototypes)
cleanups
- misc other cleanups all around the map"
* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
x86/mm/set_memory: Fix -Wmissing-prototypes warnings
x86/efi: Add a prototype for efi_arch_mem_reserve()
x86/mm: Mark setup_emu2phys_nid() static
x86/jump_label: Move 'inline' keyword placement
x86/platform/uv: Add a missing prototype for uv_bau_message_interrupt()
kill uaccess_try()
x86: unsafe_put-style macro for sigmask
x86: x32_setup_rt_frame(): consolidate uaccess areas
x86: __setup_rt_frame(): consolidate uaccess areas
x86: __setup_frame(): consolidate uaccess areas
x86: setup_sigcontext(): list user_access_{begin,end}() into callers
x86: get rid of put_user_try in __setup_rt_frame() (both 32bit and 64bit)
x86: ia32_setup_rt_frame(): consolidate uaccess areas
x86: ia32_setup_frame(): consolidate uaccess areas
x86: ia32_setup_sigcontext(): lift user_access_{begin,end}() into the callers
x86/alternatives: Mark text_poke_loc_init() static
x86/cpu: Fix a -Wmissing-prototypes warning for init_ia32_feat_ctl()
x86/mm: Drop pud_mknotpresent()
x86: Replace setup_irq() by request_irq()
x86/configs: Slightly reduce defconfigs
...
Pull x86 build updates from Ingo Molnar:
"A handful of updates: two linker script cleanups and a stock
defconfig+allmodconfig bootability fix"
* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vdso: Discard .note.gnu.property sections in vDSO
x86, vmlinux.lds: Add RUNTIME_DISCARD_EXIT to generic DISCARDS
x86/Kconfig: Make CMDLINE_OVERRIDE depend on non-empty CMDLINE
Pull x86 boot updates from Ingo Molnar:
"Misc cleanups and small enhancements all around the map"
* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/compressed: Fix debug_puthex() parameter type
x86/setup: Fix static memory detection
x86/vmlinux: Drop unneeded linker script discard of .eh_frame
x86/*/Makefile: Use -fno-asynchronous-unwind-tables to suppress .eh_frame sections
x86/boot/compressed: Remove .eh_frame section from bzImage
x86/boot/compressed/64: Remove .bss/.pgtable from bzImage
x86/boot/compressed/64: Use 32-bit (zero-extended) MOV for z_output_len
x86/boot/compressed/64: Use LEA to initialize boot stack pointer
- A series of commits to make the MSR derived CPU and TSC frequency more
accurate.
It turned out that the frequency tables which have been taken from the
SDM are inaccurate because the SDM provides truncated and rounded
values, e.g. 83.3Mhz (83.3333...) or 116.7Mhz (116.6666...).
This causes time drift in the range of ~1 second per hour
(20-30 seconds per day). On some of these SoCs it's not possible to
recalibrate the TSC because there is no reference (PIT, HPET) available.
With some reverse engineering it was established that the possible
frequencies are derived from the base clock with fixed multiplier /
divider pairs.
For the CPU models which have a known crystal frequency the kernel now
uses multiplier / divider pairs which bring the frequencies closer to
reality and fix the observed time drift issues.
-----BEGIN PGP SIGNATURE-----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=9eX1
-----END PGP SIGNATURE-----
Merge tag 'x86-timers-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 timer updates from Thomas Gleixner:
"A series of commits to make the MSR derived CPU and TSC frequency more
accurate.
It turned out that the frequency tables which have been taken from the
SDM are inaccurate because the SDM provides truncated and rounded
values, e.g. 83.3Mhz (83.3333...) or 116.7Mhz (116.6666...).
This causes time drift in the range of ~1 second per hour (20-30
seconds per day). On some of these SoCs it's not possible to
recalibrate the TSC because there is no reference (PIT, HPET)
available.
With some reverse engineering it was established that the possible
frequencies are derived from the base clock with fixed multiplier /
divider pairs.
For the CPU models which have a known crystal frequency the kernel now
uses multiplier / divider pairs which bring the frequencies closer to
reality and fix the observed time drift issues"
* tag 'x86-timers-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tsc_msr: Make MSR derived TSC frequency more accurate
x86/tsc_msr: Fix MSR_FSB_FREQ mask for Cherry Trail devices
x86/tsc_msr: Use named struct initializers
- Atomic operations (lock prefixed instructions) which span two cache
lines have to acquire the global bus lock. This is at least 1k cycles
slower than an atomic operation within a cache line and disrupts
performance on other cores. Aside of performance disruption this is
a unpriviledged form of DoS.
Some newer CPUs have the capability to raise an #AC trap when such an
operation is attempted. The detection is by default enabled in warning
mode which will warn once when a user space application is caught. A
command line option allows to disable the detection or to select fatal
mode which will terminate offending applications with SIGBUS.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl6B/uMTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYocsAD/9yqpw+XlPKNPsfbm9sbirBDfTrENcL
F44iwn4WnrjoW/gnnZCYmPxJFsTtGVPqxHdUf4eyGemg9r9ZEO0DQftmUHC5Z6KX
aa/b5JoeM61wp9HlpVlD4D1jVt4pWyQODQeZnUXE4DEzmRc3cD/5lSU+/VeaIwwz
lxwUemqmXK7ucH2KA7smOGsl2nU6ED84q3mdOB1b4Cw+gWYMUnPJnuS/ipriBRx4
BYbMItcxsFvtdO9Hx8PvGd5LUK0wW8JOWrYQICD2kLpZtHtGeaHpBzFzL0+nMU7d
1epyDqJQDmX+PAzvj+EYyn3HTfobZlckn+tbxMQkkS+oDk1ywOZd+BancClvn5/5
jMfPIQJF5bGASVnzGMWhzVdwthTZiMG4d1iKsUWOA/hN0ch0+rm1BqraToabsEFg
Sv7/rvl9KtSOtMJTeAmMhlZUMBj9m8BtPFjniDwp6nw/upGgJdST5mrKFNYZvqOj
JnXsEMr/nJVW6bnUvT6LF66xbHlzHdxtodkQWqF+IEsyRaOz1zAGpQamP98KxNLc
dq/XYoEe1KqIFbg4BkNP+GeDL3FQDxjFNwPQnnjQEzWRbjkHlfmq1uKCsR2r8mBO
fYNJ1X8lTyGV0kx/ERpWGazzabpzh+8Lr1yMhnoA3EWvlzUjmpN2PFI4oTpTrtzT
c/q16SCxim3NWA==
=D9x8
-----END PGP SIGNATURE-----
Merge tag 'x86-splitlock-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 splitlock updates from Thomas Gleixner:
"Support for 'split lock' detection:
Atomic operations (lock prefixed instructions) which span two cache
lines have to acquire the global bus lock. This is at least 1k cycles
slower than an atomic operation within a cache line and disrupts
performance on other cores. Aside of performance disruption this is a
unpriviledged form of DoS.
Some newer CPUs have the capability to raise an #AC trap when such an
operation is attempted. The detection is by default enabled in warning
mode which will warn once when a user space application is caught. A
command line option allows to disable the detection or to select fatal
mode which will terminate offending applications with SIGBUS"
* tag 'x86-splitlock-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/split_lock: Avoid runtime reads of the TEST_CTRL MSR
x86/split_lock: Rework the initialization flow of split lock detection
x86/split_lock: Enable split lock detection by kernel
- Convert the 32bit syscalls to be pt_regs based which removes the
requirement to push all 6 potential arguments onto the stack and
consolidates the interface with the 64bit variant
- The first small portion of the exception and syscall related entry
code consolidation which aims to address the recently discovered
issues vs. RCU, int3, NMI and some other exceptions which can
interrupt any context. The bulk of the changes is still work in
progress and aimed for 5.8.
- A few lockdep namespace cleanups which have been applied into this
branch to keep the prerequisites for the ongoing work confined.
-----BEGIN PGP SIGNATURE-----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=tWXS
-----END PGP SIGNATURE-----
Merge tag 'x86-entry-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 entry code updates from Thomas Gleixner:
- Convert the 32bit syscalls to be pt_regs based which removes the
requirement to push all 6 potential arguments onto the stack and
consolidates the interface with the 64bit variant
- The first small portion of the exception and syscall related entry
code consolidation which aims to address the recently discovered
issues vs. RCU, int3, NMI and some other exceptions which can
interrupt any context. The bulk of the changes is still work in
progress and aimed for 5.8.
- A few lockdep namespace cleanups which have been applied into this
branch to keep the prerequisites for the ongoing work confined.
* tag 'x86-entry-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (35 commits)
x86/entry: Fix build error x86 with !CONFIG_POSIX_TIMERS
lockdep: Rename trace_{hard,soft}{irq_context,irqs_enabled}()
lockdep: Rename trace_softirqs_{on,off}()
lockdep: Rename trace_hardirq_{enter,exit}()
x86/entry: Rename ___preempt_schedule
x86: Remove unneeded includes
x86/entry: Drop asmlinkage from syscalls
x86/entry/32: Enable pt_regs based syscalls
x86/entry/32: Use IA32-specific wrappers for syscalls taking 64-bit arguments
x86/entry/32: Rename 32-bit specific syscalls
x86/entry/32: Clean up syscall_32.tbl
x86/entry: Remove ABI prefixes from functions in syscall tables
x86/entry/64: Add __SYSCALL_COMMON()
x86/entry: Remove syscall qualifier support
x86/entry/64: Remove ptregs qualifier from syscall table
x86/entry: Move max syscall number calculation to syscallhdr.sh
x86/entry/64: Split X32 syscall table into its own file
x86/entry/64: Move sys_ni_syscall stub to common.c
x86/entry/64: Use syscall wrappers for x32_rt_sigreturn
x86/entry: Refactor SYS_NI macros
...
Core:
- Consolidation of the vDSO build infrastructure to address the
difficulties of cross-builds for ARM64 compat vDSO libraries by
restricting the exposure of header content to the vDSO build.
This is achieved by splitting out header content into separate
headers. which contain only the minimaly required information which is
necessary to build the vDSO. These new headers are included from the
kernel headers and the vDSO specific files.
- Enhancements to the generic vDSO library allowing more fine grained
control over the compiled in code, further reducing architecture
specific storage and preparing for adopting the generic library by PPC.
- Cleanup and consolidation of the exit related code in posix CPU timers.
- Small cleanups and enhancements here and there
Drivers:
- The obligatory new drivers: Ingenic JZ47xx and X1000 TCU support
- Correct the clock rate of PIT64b global clock
- setup_irq() cleanup
- Preparation for PWM and suspend support for the TI DM timer
- Expand the fttmr010 driver to support ast2600 systems
- The usual small fixes, enhancements and cleanups all over the place
-----BEGIN PGP SIGNATURE-----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=5o9G
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timekeeping and timer updates from Thomas Gleixner:
"Core:
- Consolidation of the vDSO build infrastructure to address the
difficulties of cross-builds for ARM64 compat vDSO libraries by
restricting the exposure of header content to the vDSO build.
This is achieved by splitting out header content into separate
headers. which contain only the minimaly required information which
is necessary to build the vDSO. These new headers are included from
the kernel headers and the vDSO specific files.
- Enhancements to the generic vDSO library allowing more fine grained
control over the compiled in code, further reducing architecture
specific storage and preparing for adopting the generic library by
PPC.
- Cleanup and consolidation of the exit related code in posix CPU
timers.
- Small cleanups and enhancements here and there
Drivers:
- The obligatory new drivers: Ingenic JZ47xx and X1000 TCU support
- Correct the clock rate of PIT64b global clock
- setup_irq() cleanup
- Preparation for PWM and suspend support for the TI DM timer
- Expand the fttmr010 driver to support ast2600 systems
- The usual small fixes, enhancements and cleanups all over the
place"
* tag 'timers-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (80 commits)
Revert "clocksource/drivers/timer-probe: Avoid creating dead devices"
vdso: Fix clocksource.h macro detection
um: Fix header inclusion
arm64: vdso32: Enable Clang Compilation
lib/vdso: Enable common headers
arm: vdso: Enable arm to use common headers
x86/vdso: Enable x86 to use common headers
mips: vdso: Enable mips to use common headers
arm64: vdso32: Include common headers in the vdso library
arm64: vdso: Include common headers in the vdso library
arm64: Introduce asm/vdso/processor.h
arm64: vdso32: Code clean up
linux/elfnote.h: Replace elf.h with UAPI equivalent
scripts: Fix the inclusion order in modpost
common: Introduce processor.h
linux/ktime.h: Extract common header for vDSO
linux/jiffies.h: Extract common header for vDSO
linux/time64.h: Extract common header for vDSO
linux/time32.h: Extract common header for vDSO
linux/time.h: Extract common header for vDSO
...
- Support for locked CSD objects in smp_call_function_single_async()
which allows to simplify callsites in the scheduler core and MIPS
- Treewide consolidation of CPU hotplug functions which ensures the
consistency between the sysfs interface and kernel state. The low level
functions cpu_up/down() are now confined to the core code and not
longer accessible from random code.
-----BEGIN PGP SIGNATURE-----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=jwCg
-----END PGP SIGNATURE-----
Merge tag 'smp-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core SMP updates from Thomas Gleixner:
"CPU (hotplug) updates:
- Support for locked CSD objects in smp_call_function_single_async()
which allows to simplify callsites in the scheduler core and MIPS
- Treewide consolidation of CPU hotplug functions which ensures the
consistency between the sysfs interface and kernel state. The low
level functions cpu_up/down() are now confined to the core code and
not longer accessible from random code"
* tag 'smp-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
cpu/hotplug: Ignore pm_wakeup_pending() for disable_nonboot_cpus()
cpu/hotplug: Hide cpu_up/down()
cpu/hotplug: Move bringup of secondary CPUs out of smp_init()
torture: Replace cpu_up/down() with add/remove_cpu()
firmware: psci: Replace cpu_up/down() with add/remove_cpu()
xen/cpuhotplug: Replace cpu_up/down() with device_online/offline()
parisc: Replace cpu_up/down() with add/remove_cpu()
sparc: Replace cpu_up/down() with add/remove_cpu()
powerpc: Replace cpu_up/down() with add/remove_cpu()
x86/smp: Replace cpu_up/down() with add/remove_cpu()
arm64: hibernate: Use bringup_hibernate_cpu()
cpu/hotplug: Provide bringup_hibernate_cpu()
arm64: Use reboot_cpu instead of hardconding it to 0
arm64: Don't use disable_nonboot_cpus()
ARM: Use reboot_cpu instead of hardcoding it to 0
ARM: Don't use disable_nonboot_cpus()
ia64: Replace cpu_down() with smp_shutdown_nonboot_cpus()
cpu/hotplug: Create a new function to shutdown nonboot cpus
cpu/hotplug: Add new {add,remove}_cpu() functions
sched/core: Remove rq.hrtick_csd_pending
...
Treewide:
- Cleanup of setup_irq() which is not longer required because the
memory allocator is available early. Most cleanup changes come
through the various maintainer trees, so the final removal of
setup_irq() is postponed towards the end of the merge window.
Core:
- Protection against unsafe invocation of interrupt handlers and unsafe
interrupt injection including a fixup of the offending PCI/AER error
injection mechanism.
Invoking interrupt handlers from arbitrary contexts, i.e. outside of
an actual interrupt, can cause inconsistent state on the fragile
x86 interrupt affinity changing hardware trainwreck.
Drivers:
- Second wave of support for the new ARM GICv4.1
- Multi-instance support for Xilinx and PLIC interrupt controllers
- CPU-Hotplug support for PLIC
- The obligatory new driver for X1000 TCU
- Enhancements, cleanups and fixes all over the place
-----BEGIN PGP SIGNATURE-----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=DZ/G
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for the interrupt subsystem:
Treewide:
- Cleanup of setup_irq() which is not longer required because the
memory allocator is available early.
Most cleanup changes come through the various maintainer trees, so
the final removal of setup_irq() is postponed towards the end of
the merge window.
Core:
- Protection against unsafe invocation of interrupt handlers and
unsafe interrupt injection including a fixup of the offending
PCI/AER error injection mechanism.
Invoking interrupt handlers from arbitrary contexts, i.e. outside
of an actual interrupt, can cause inconsistent state on the
fragile x86 interrupt affinity changing hardware trainwreck.
Drivers:
- Second wave of support for the new ARM GICv4.1
- Multi-instance support for Xilinx and PLIC interrupt controllers
- CPU-Hotplug support for PLIC
- The obligatory new driver for X1000 TCU
- Enhancements, cleanups and fixes all over the place"
* tag 'irq-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits)
unicore32: Replace setup_irq() by request_irq()
sh: Replace setup_irq() by request_irq()
hexagon: Replace setup_irq() by request_irq()
c6x: Replace setup_irq() by request_irq()
alpha: Replace setup_irq() by request_irq()
irqchip/gic-v4.1: Eagerly vmap vPEs
irqchip/gic-v4.1: Add VSGI property setup
irqchip/gic-v4.1: Add VSGI allocation/teardown
irqchip/gic-v4.1: Move doorbell management to the GICv4 abstraction layer
irqchip/gic-v4.1: Plumb set_vcpu_affinity SGI callbacks
irqchip/gic-v4.1: Plumb get/set_irqchip_state SGI callbacks
irqchip/gic-v4.1: Plumb mask/unmask SGI callbacks
irqchip/gic-v4.1: Add initial SGI configuration
irqchip/gic-v4.1: Plumb skeletal VSGI irqchip
irqchip/stm32: Retrigger both in eoi and unmask callbacks
irqchip/gic-v3: Move irq_domain_update_bus_token to after checking for NULL domain
irqchip/xilinx: Do not call irq_set_default_host()
irqchip/xilinx: Enable generic irq multi handler
irqchip/xilinx: Fill error code when irq domain registration fails
irqchip/xilinx: Add support for multiple instances
...
Pull scheduler updates from Ingo Molnar:
"The main changes in this cycle are:
- Various NUMA scheduling updates: harmonize the load-balancer and
NUMA placement logic to not work against each other. The intended
result is better locality, better utilization and fewer migrations.
- Introduce Thermal Pressure tracking and optimizations, to improve
task placement on thermally overloaded systems.
- Implement frequency invariant scheduler accounting on (some) x86
CPUs. This is done by observing and sampling the 'recent' CPU
frequency average at ~tick boundaries. The CPU provides this data
via the APERF/MPERF MSRs. This hopefully makes our capacity
estimates more precise and keeps tasks on the same CPU better even
if it might seem overloaded at a lower momentary frequency. (As
usual, turbo mode is a complication that we resolve by observing
the maximum frequency and renormalizing to it.)
- Add asymmetric CPU capacity wakeup scan to improve capacity
utilization on asymmetric topologies. (big.LITTLE systems)
- PSI fixes and optimizations.
- RT scheduling capacity awareness fixes & improvements.
- Optimize the CONFIG_RT_GROUP_SCHED constraints code.
- Misc fixes, cleanups and optimizations - see the changelog for
details"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (62 commits)
threads: Update PID limit comment according to futex UAPI change
sched/fair: Fix condition of avg_load calculation
sched/rt: cpupri_find: Trigger a full search as fallback
kthread: Do not preempt current task if it is going to call schedule()
sched/fair: Improve spreading of utilization
sched: Avoid scale real weight down to zero
psi: Move PF_MEMSTALL out of task->flags
MAINTAINERS: Add maintenance information for psi
psi: Optimize switching tasks inside shared cgroups
psi: Fix cpu.pressure for cpu.max and competing cgroups
sched/core: Distribute tasks within affinity masks
sched/fair: Fix enqueue_task_fair warning
thermal/cpu-cooling, sched/core: Move the arch_set_thermal_pressure() API to generic scheduler code
sched/rt: Remove unnecessary push for unfit tasks
sched/rt: Allow pulling unfitting task
sched/rt: Optimize cpupri_find() on non-heterogenous systems
sched/rt: Re-instate old behavior in select_task_rq_rt()
sched/rt: cpupri_find: Implement fallback mechanism for !fit case
sched/fair: Fix reordering of enqueue/dequeue_task_fair()
sched/fair: Fix runnable_avg for throttled cfs
...
Pull perf updates from Ingo Molnar:
"The main changes in this cycle were:
Kernel side changes:
- A couple of x86/cpu cleanups and changes were grandfathered in due
to patch dependencies. These clean up the set of CPU model/family
matching macros with a consistent namespace and C99 initializer
style.
- A bunch of updates to various low level PMU drivers:
* AMD Family 19h L3 uncore PMU
* Intel Tiger Lake uncore support
* misc fixes to LBR TOS sampling
- optprobe fixes
- perf/cgroup: optimize cgroup event sched-in processing
- misc cleanups and fixes
Tooling side changes are to:
- perf {annotate,expr,record,report,stat,test}
- perl scripting
- libapi, libperf and libtraceevent
- vendor events on Intel and S390, ARM cs-etm
- Intel PT updates
- Documentation changes and updates to core facilities
- misc cleanups, fixes and other enhancements"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (89 commits)
cpufreq/intel_pstate: Fix wrong macro conversion
x86/cpu: Cleanup the now unused CPU match macros
hwrng: via_rng: Convert to new X86 CPU match macros
crypto: Convert to new CPU match macros
ASoC: Intel: Convert to new X86 CPU match macros
powercap/intel_rapl: Convert to new X86 CPU match macros
PCI: intel-mid: Convert to new X86 CPU match macros
mmc: sdhci-acpi: Convert to new X86 CPU match macros
intel_idle: Convert to new X86 CPU match macros
extcon: axp288: Convert to new X86 CPU match macros
thermal: Convert to new X86 CPU match macros
hwmon: Convert to new X86 CPU match macros
platform/x86: Convert to new CPU match macros
EDAC: Convert to new X86 CPU match macros
cpufreq: Convert to new X86 CPU match macros
ACPI: Convert to new X86 CPU match macros
x86/platform: Convert to new CPU match macros
x86/kernel: Convert to new CPU match macros
x86/kvm: Convert to new CPU match macros
x86/perf/events: Convert to new CPU match macros
...
Pull EFI updates from Ingo Molnar:
"The EFI changes in this cycle are much larger than usual, for two
(positive) reasons:
- The GRUB project is showing signs of life again, resulting in the
introduction of the generic Linux/UEFI boot protocol, instead of
x86 specific hacks which are increasingly difficult to maintain.
There's hope that all future extensions will now go through that
boot protocol.
- Preparatory work for RISC-V EFI support.
The main changes are:
- Boot time GDT handling changes
- Simplify handling of EFI properties table on arm64
- Generic EFI stub cleanups, to improve command line handling, file
I/O, memory allocation, etc.
- Introduce a generic initrd loading method based on calling back
into the firmware, instead of relying on the x86 EFI handover
protocol or device tree.
- Introduce a mixed mode boot method that does not rely on the x86
EFI handover protocol either, and could potentially be adopted by
other architectures (if another one ever surfaces where one
execution mode is a superset of another)
- Clean up the contents of 'struct efi', and move out everything that
doesn't need to be stored there.
- Incorporate support for UEFI spec v2.8A changes that permit
firmware implementations to return EFI_UNSUPPORTED from UEFI
runtime services at OS runtime, and expose a mask of which ones are
supported or unsupported via a configuration table.
- Partial fix for the lack of by-VA cache maintenance in the
decompressor on 32-bit ARM.
- Changes to load device firmware from EFI boot service memory
regions
- Various documentation updates and minor code cleanups and fixes"
* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits)
efi/libstub/arm: Fix spurious message that an initrd was loaded
efi/libstub/arm64: Avoid image_base value from efi_loaded_image
partitions/efi: Fix partition name parsing in GUID partition entry
efi/x86: Fix cast of image argument
efi/libstub/x86: Use ULONG_MAX as upper bound for all allocations
efi: Fix a mistype in comments mentioning efivar_entry_iter_begin()
efi/libstub: Avoid linking libstub/lib-ksyms.o into vmlinux
efi/x86: Preserve %ebx correctly in efi_set_virtual_address_map()
efi/x86: Ignore the memory attributes table on i386
efi/x86: Don't relocate the kernel unless necessary
efi/x86: Remove extra headroom for setup block
efi/x86: Add kernel preferred address to PE header
efi/x86: Decompress at start of PE image load address
x86/boot/compressed/32: Save the output address instead of recalculating it
efi/libstub/x86: Deal with exit() boot service returning
x86/boot: Use unsigned comparison for addresses
efi/x86: Avoid using code32_start
efi/x86: Make efi32_pe_entry() more readable
efi/x86: Respect 32-bit ABI in efi32_pe_entry()
efi/x86: Annotate the LOADED_IMAGE_PROTOCOL_GUID with SYM_DATA
...
Pull objtool updates from Ingo Molnar:
"The biggest changes in this cycle were the vmlinux.o optimizations by
Peter Zijlstra, which are preparatory and optimization work to run
objtool against the much richer vmlinux.o object file, to perform
new, whole-program section based logic. That work exposed a handful
of problems with the existing code, which fixes and optimizations are
merged here. The complete 'vmlinux.o and noinstr' work is still work
in progress, targeted for v5.8.
There's also assorted fixes and enhancements from Josh Poimboeuf.
In particular I'd like to draw attention to commit 644592d328,
which turns fatal objtool errors into failed kernel builds. This
behavior is IMO now justified on multiple grounds (it's easy currently
to not notice an essentially corrupted kernel build), and the commit
has been in -next testing for several weeks, but there could still be
build failures with old or weird toolchains. Should that be widespread
or high profile enough then I'd suggest a quick revert, to not hold up
the merge window"
* 'core-objtool-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
objtool: Re-arrange validate_functions()
objtool: Optimize find_rela_by_dest_range()
objtool: Delete cleanup()
objtool: Optimize read_sections()
objtool: Optimize find_symbol_by_name()
objtool: Resize insn_hash
objtool: Rename find_containing_func()
objtool: Optimize find_symbol_*() and read_symbols()
objtool: Optimize find_section_by_name()
objtool: Optimize find_section_by_index()
objtool: Add a statistics mode
objtool: Optimize find_symbol_by_index()
x86/kexec: Make relocate_kernel_64.S objtool clean
x86/kexec: Use RIP relative addressing
objtool: Rename func_for_each_insn_all()
objtool: Rename func_for_each_insn()
objtool: Introduce validate_return()
objtool: Improve call destination function detection
objtool: Fix clang switch table edge case
objtool: Add relocation check for alternative sections
...
- Update the ACPICA code in the kernel to the 20200214 upstream
release including:
* Fix to re-enable the sleep button after wakeup (Anchal Agarwal).
* Fixes for mistakes in comments and typos (Bob Moore).
* ASL-ASL+ converter updates (Erik Kaneda).
* Type casting cleanups (Sven Barth).
- Clean up the intialization of the EC driver and eliminate some
dead code from it (Rafael Wysocki).
- Clean up the quirk tables in the AC and battery drivers (Hans de
Goede).
- Fix the global lock handling on x86 to ignore unspecified bit
positions in the global lock field (Jan Engelhardt).
- Add a new "tiny" driver for ACPI button devices exposed by VMs to
guest kernels to send signals directly to init (Josh Triplett).
- Add a kernel parameter to disable ACPI BGRT on x86 (Alex Hung).
- Make the ACPI PCI host bridge and fan drivers use scnprintf() to
avoid potential buffer overflows (Takashi Iwai).
- Clean up assorted pieces of code:
* Reorder "asmlinkage" to make g++ happy (Alexey Dobriyan).
* Drop unneeded variable initialization (Colin Ian King).
* Add missing __acquires/__releases annotations (Jules Irenge).
* Replace list_for_each_safe() with list_for_each_entry_safe()
(chenqiwu).
-----BEGIN PGP SIGNATURE-----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=kQmH
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
- Update the ACPICA code in the kernel to the 20200214 upstream
release including:
* Fix to re-enable the sleep button after wakeup (Anchal
Agarwal).
* Fixes for mistakes in comments and typos (Bob Moore).
* ASL-ASL+ converter updates (Erik Kaneda).
* Type casting cleanups (Sven Barth).
- Clean up the intialization of the EC driver and eliminate some dead
code from it (Rafael Wysocki).
- Clean up the quirk tables in the AC and battery drivers (Hans de
Goede).
- Fix the global lock handling on x86 to ignore unspecified bit
positions in the global lock field (Jan Engelhardt).
- Add a new "tiny" driver for ACPI button devices exposed by VMs to
guest kernels to send signals directly to init (Josh Triplett).
- Add a kernel parameter to disable ACPI BGRT on x86 (Alex Hung).
- Make the ACPI PCI host bridge and fan drivers use scnprintf() to
avoid potential buffer overflows (Takashi Iwai).
- Clean up assorted pieces of code:
* Reorder "asmlinkage" to make g++ happy (Alexey Dobriyan).
* Drop unneeded variable initialization (Colin Ian King).
* Add missing __acquires/__releases annotations (Jules Irenge).
* Replace list_for_each_safe() with list_for_each_entry_safe()
(chenqiwu)"
* tag 'acpi-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (31 commits)
ACPICA: Update version to 20200214
ACPI: PCI: Use scnprintf() for avoiding potential buffer overflow
ACPI: fan: Use scnprintf() for avoiding potential buffer overflow
ACPI: EC: Eliminate EC_FLAGS_QUERY_HANDSHAKE
ACPI: EC: Do not clear boot_ec_is_ecdt in acpi_ec_add()
ACPI: EC: Simplify acpi_ec_ecdt_start() and acpi_ec_init()
ACPI: EC: Consolidate event handler installation code
acpi/x86: ignore unspecified bit positions in the ACPI global lock field
acpi/x86: add a kernel parameter to disable ACPI BGRT
x86/acpi: make "asmlinkage" part first thing in the function definition
ACPI: list_for_each_safe() -> list_for_each_entry_safe()
ACPI: video: remove redundant assignments to variable result
ACPI: OSL: Add missing __acquires/__releases annotations
ACPI / battery: Cleanup Lenovo Ideapad Miix 320 DMI table entry
ACPI / AC: Cleanup DMI quirk table
ACPI: EC: Use fast path in acpi_ec_add() for DSDT boot EC
ACPI: EC: Simplify acpi_ec_add()
ACPI: EC: Drop AE_NOT_FOUND special case from ec_install_handlers()
ACPI: EC: Avoid passing redundant argument to functions
ACPI: EC: Avoid printing confusing messages in acpi_ec_setup()
...
by Prarit Bhargava.
* Change dev-mcelog's hardcoded limit of 32 error records to a dynamic
one, controlled by the number of logical CPUs, by Tony Luck.
* Add support for the processor identification number (PPIN) on AMD, by
Wei Huang.
-----BEGIN PGP SIGNATURE-----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=3/4h
-----END PGP SIGNATURE-----
Merge tag 'ras_updates_for_5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS updates from Borislav Petkov:
- Do not report spurious MCEs on some Intel platforms caused by errata;
by Prarit Bhargava.
- Change dev-mcelog's hardcoded limit of 32 error records to a dynamic
one, controlled by the number of logical CPUs, by Tony Luck.
- Add support for the processor identification number (PPIN) on AMD, by
Wei Huang.
* tag 'ras_updates_for_5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce/amd: Add PPIN support for AMD MCE
x86/mce/dev-mcelog: Dynamically allocate space for machine check records
x86/mce: Do not log spurious corrected mce errors
In the x86 kernel, .exit.text and .exit.data sections are discarded at
runtime, not by the linker. Add RUNTIME_DISCARD_EXIT to generic DISCARDS
and define it in the x86 kernel linker script to keep them.
The sections are added before the DISCARD directive so document here
only the situation explicitly as this change doesn't have any effect on
the generated kernel. Also, other architectures like ARM64 will use it
too so generalize the approach with the RUNTIME_DISCARD_EXIT define.
[ bp: Massage and extend commit message. ]
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20200326193021.255002-1-hjl.tools@gmail.com
In a context switch from a task that is detecting split locks to one that
is not (or vice versa) we need to update the TEST_CTRL MSR. Currently this
is done with the common sequence:
read the MSR
flip the bit
write the MSR
in order to avoid changing the value of any reserved bits in the MSR.
Cache unused and reserved bits of TEST_CTRL MSR with SPLIT_LOCK_DETECT bit
cleared during initialization, so we can avoid an expensive RDMSR
instruction during context switch.
Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Originally-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200325030924.132881-3-xiaoyao.li@intel.com
Current initialization flow of split lock detection has following issues:
1. It assumes the initial value of MSR_TEST_CTRL.SPLIT_LOCK_DETECT to be
zero. However, it's possible that BIOS/firmware has set it.
2. X86_FEATURE_SPLIT_LOCK_DETECT flag is unconditionally set even if
there is a virtualization flaw that FMS indicates the existence while
it's actually not supported.
Rework the initialization flow to solve above issues. In detail, explicitly
clear and set split_lock_detect bit to verify MSR_TEST_CTRL can be
accessed, and rdmsr after wrmsr to ensure bit is cleared/set successfully.
X86_FEATURE_SPLIT_LOCK_DETECT flag is set only when the feature does exist
and the feature is not disabled with kernel param "split_lock_detect=off"
On each processor, explicitly updating the SPLIT_LOCK_DETECT bit based on
sld_sate in split_lock_init() since BIOS/firmware may touch it.
Originally-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200325030924.132881-2-xiaoyao.li@intel.com
Fix gcc warning when -Wextra is used by moving the keyword:
arch/x86/kernel/jump_label.c:61:1: warning: ‘inline’ is not at \
beginning of declaration [-Wold-style-declaration]
static void inline __jump_label_transform(struct jump_entry *entry,
^~~~~~
Reported-by: Zzy Wysm <zzy@zzywysm.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/796d93d2-e73e-3447-44eb-4f89e1b636d9@infradead.org
Similar to ia32_setup_sigcontext() change several commits ago, make it
__always_inline. In cases when there is a user_access_{begin,end}()
section nearby, just move the call over there.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Straightforward, except for save_altstack_ex() stuck in those.
Replace that thing with an analogue that would use unsafe_put_user()
instead of put_user_ex() (called compat_save_altstack()) and be done
with that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Having fixed the biggest objtool issue in this file; fix up the rest
and remove the exception.
Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200324160924.202621656@infradead.org
Normally identity_mapped is not visible to objtool, due to:
arch/x86/kernel/Makefile:OBJECT_FILES_NON_STANDARD_relocate_kernel_$(BITS).o := y
However, when we want to run objtool on vmlinux.o there is no hiding
it:
vmlinux.o: warning: objtool: .text+0x4c0f1: unsupported intra-function call
Replace the (i386 inspired) pattern:
call 1f
1: popq %r8
subq $(1b - relocate_kernel), %r8
With a x86_64 RIP-relative LEA:
leaq relocate_kernel(%rip), %r8
Suggested-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200324160924.143334345@infradead.org
The core device API performs extra housekeeping bits that are missing
from directly calling cpu_up/down().
See commit a6717c01dd ("powerpc/rtas: use device model APIs and
serialization during LPM") for an example description of what might go
wrong.
This also prepares to make cpu_up/down() a private interface of the CPU
subsystem.
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200323135110.30522-10-qais.yousef@arm.com
The new macro set has a consistent namespace and uses C99 initializers
instead of the grufty C89 ones.
Get rid the of the local macro wrappers for consistency.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lkml.kernel.org/r/20200320131509.250559388@linutronix.de
The new macro set has a consistent namespace and uses C99 initializers
instead of the grufty C89 ones.
The local wrappers have to stay as they are tailored to tame the hardware
vulnerability mess.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lkml.kernel.org/r/20200320131508.934926587@linutronix.de
Finding all places which build x86_cpu_id match tables is tedious and the
logic is hidden in lots of differently named macro wrappers.
Most of these initializer macros use plain C89 initializers which rely on
the ordering of the struct members. So new members could only be added at
the end of the struct, but that's ugly as hell and C99 initializers are
really the right thing to use.
Provide a set of macros which:
- Have a proper naming scheme, starting with X86_MATCH_
- Use C99 initializers
The set of provided macros are all subsets of the base macro
X86_MATCH_VENDOR_FAM_MODEL_FEATURE()
which allows to supply all possible selection criteria:
vendor, family, model, feature
The other macros shorten this to avoid typing all arguments when they are
not needed and would require one of the _ANY constants. They have been
created due to the requirements of the existing usage sites.
Also add a few model constants for Centaur CPUs and QUARK.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lkml.kernel.org/r/20200320131508.826011988@linutronix.de
Set paravirt_steal_rq_enabled if steal clock present.
paravirt_steal_rq_enabled is used in sched/core.c to adjust task
progress by offsetting stolen time. Use 'no-steal-acc' off switch (share
same name with KVM) to disable steal time accounting.
Signed-off-by: Alexey Makhalov <amakhalov@vmware.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200323195707.31242-5-amakhalov@vmware.com
Steal time is the amount of CPU time needed by a guest virtual machine
that is not provided by the host. Steal time occurs when the host
allocates this CPU time elsewhere, for example, to another guest.
Steal time can be enabled by adding the VM configuration option
stealclock.enable = "TRUE". It is supported by VMs that run hardware
version 13 or newer.
Introduce the VMware steal time infrastructure. The high level code
(such as enabling, disabling and hot-plug routines) was derived from KVM.
[ Tomer: use READ_ONCE macros and 32bit guests support. ]
[ bp: Massage. ]
Co-developed-by: Tomer Zeltzer <tomerr90@gmail.com>
Signed-off-by: Alexey Makhalov <amakhalov@vmware.com>
Signed-off-by: Tomer Zeltzer <tomerr90@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200323195707.31242-4-amakhalov@vmware.com
Move cyc2ns setup logic to separate function.
This separation will allow to use cyc2ns mult/shift pair
not only for the sched_clock but also for other clocks
such as steal_clock.
Signed-off-by: Alexey Makhalov <amakhalov@vmware.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200323195707.31242-3-amakhalov@vmware.com
vmware_select_hypercall() is used only by the __init
functions, and should be annotated with __init as well.
Signed-off-by: Alexey Makhalov <amakhalov@vmware.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200323195707.31242-2-amakhalov@vmware.com
Add a missing include in order to fix -Wmissing-prototypes warning:
arch/x86/kernel/cpu/feat_ctl.c:95:6: warning: no previous prototype for ‘init_ia32_feat_ctl’ [-Wmissing-prototypes]
95 | void init_ia32_feat_ctl(struct cpuinfo_x86 *c)
Signed-off-by: Benjamin Thiel <b.thiel@posteo.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200323105934.26597-1-b.thiel@posteo.de
Newer AMD CPUs support a feature called protected processor
identification number (PPIN). This feature can be detected via
CPUID_Fn80000008_EBX[23].
However, CPUID alone is not enough to read the processor identification
number - MSR_AMD_PPIN_CTL also needs to be configured properly. If, for
any reason, MSR_AMD_PPIN_CTL[PPIN_EN] can not be turned on, such as
disabled in BIOS, the CPU capability bit X86_FEATURE_AMD_PPIN needs to
be cleared.
When the X86_FEATURE_AMD_PPIN capability is available, the
identification number is issued together with the MCE error info in
order to keep track of the source of MCE errors.
[ bp: Massage. ]
Co-developed-by: Smita Koralahalli Channabasappa <smita.koralahallichannabasappa@amd.com>
Signed-off-by: Smita Koralahalli Channabasappa <smita.koralahallichannabasappa@amd.com>
Signed-off-by: Wei Huang <wei.huang2@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20200321193800.3666964-1-wei.huang2@amd.com
For the 32-bit syscall interface, 64-bit arguments (loff_t) are passed via
a pair of 32-bit registers. These register pairs end up in consecutive stack
slots, which matches the C ABI for 64-bit arguments. But when accessing the
registers directly from pt_regs, the wrapper needs to manually reassemble the
64-bit value. These wrappers already exist for 32-bit compat, so make them
available to 32-bit native in preparation for enabling pt_regs-based syscalls.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Link: https://lkml.kernel.org/r/20200313195144.164260-16-brgerst@gmail.com
Instead of using an array in asm-offsets to calculate the max syscall
number, calculate it when writing out the syscall headers.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200313195144.164260-9-brgerst@gmail.com
request_irq() is preferred over setup_irq(). The early boot setup_irq()
invocations happen either via 'init_IRQ()' or 'time_init()', while
memory allocators are ready by 'mm_init()'.
setup_irq() was required in old kernels when allocators were not ready by
the time early interrupts were initialized.
Hence replace setup_irq() by request_irq().
[ tglx: Use a local variable and get rid of the line break. Tweak the
comment a bit ]
Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/17f85021f6877650a5b09e0212d88323e6a30fd0.1582471508.git.afzal.mohd.ma@gmail.com
While looking at an objtool UACCESS warning, it suddenly occurred to me
that it is entirely possible to have an OPTPROBE right in the middle of
an UACCESS region.
In this case we must of course clear FLAGS.AC while running the KPROBE.
Luckily the trampoline already saves/restores [ER]FLAGS, so all we need
to do is inject a CLAC. Unfortunately we cannot use ALTERNATIVE() in the
trampoline text, so we have to frob that manually.
Fixes: ca0bbc70f147 ("sched/x86_64: Don't save flags on context switch")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lkml.kernel.org/r/20200305092130.GU2596@hirez.programming.kicks-ass.net
When booting x86 images in qemu, the following warning is seen randomly
if DEBUG_LOCKDEP is enabled.
WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:1119
lockdep_register_key+0xc0/0x100
static_obj() returns true if an address is between _stext and _end.
On x86, this includes the brk memory space. Problem is that this memory
block is not static on x86; its unused portions are released after init
and can be allocated. This results in the observed warning if a lockdep
object is allocated from this memory.
Solve the problem by implementing arch_is_kernel_initmem_freed() for
x86 and have it return true if an address is within the released memory
range.
The same problem was solved for s390 with commit
7a5da02de8 ("locking/lockdep: check for freed initmem in static_obj()"),
which introduced arch_is_kernel_initmem_freed().
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200131021159.9178-1-linux@roeck-us.net
Straightforward, except for compat_save_altstack_ex() stuck in those.
Replace that thing with an analogue that would use unsafe_put_user()
instead of put_user_ex() (called unsafe_compat_save_altstack()) and
be done with that...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Just do copyin into a local struct and be done with that - we are
on a shallow stack here.
[reworked by tglx, removing the macro horrors while we are touching that]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Just do a copyin of what we want into a local variable and
be done with that. We are guaranteed to be on shallow stack
here...
Note that conditional expression for range passed to access_ok()
in mainline had been pointless all along - the only difference
between vm86plus_struct and vm86_struct is that the former has
one extra field in the end and when we get to copyin of that
field (conditional upon 'plus' argument), we use copy_from_user().
Moreover, all fields starting with ->int_revectored are copied
that way, so we only need that check (be it done by access_ok()
or by user_access_begin()) only on the beginning of the structure -
the fields that used to be covered by that get_user_try() block.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
... and consolidate the definition of sigframe_ia32->extramask - it's
always a 1-element array of 32bit unsigned.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
... to find whether there are northbridges present on the
system. Convert the last forgotten user and therefore, unexport
amd_nb_misc_ids[] too.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Michal Kubecek <mkubecek@suse.cz>
Cc: Yazen Ghannam <yazen.ghannam@amd.com>
Link: https://lkml.kernel.org/r/20200316150725.925-1-bp@alien8.de
- Map EFI runtime service data as encrypted when SEV is enabled otherwise
e.g. SMBIOS data cannot be properly decoded by dmidecode.
- Remove the warning in the vector management code which triggered when a
managed interrupt affinity changed outside of a CPU hotplug
operation. The warning was correct until the recent core code change
that introduced a CPU isolation feature which needs to migrate managed
interrupts away from online CPUs under certain conditions to achieve the
isolation.
-----BEGIN PGP SIGNATURE-----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=KeLM
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"Two fixes for x86:
- Map EFI runtime service data as encrypted when SEV is enabled.
Otherwise e.g. SMBIOS data cannot be properly decoded by dmidecode.
- Remove the warning in the vector management code which triggered
when a managed interrupt affinity changed outside of a CPU hotplug
operation.
The warning was correct until the recent core code change that
introduced a CPU isolation feature which needs to migrate managed
interrupts away from online CPUs under certain conditions to
achieve the isolation"
* tag 'x86-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vector: Remove warning on managed interrupt migration
x86/ioremap: Map EFI runtime services data as encrypted for SEV
- Shut down the per CPU thermal throttling poll work properly when a CPU
goes offline. The missing shutdown caused the poll work to be migrated
to a unbound worker which triggered warnings about the usage of
smp_processor_id() in preemptible context
- Fix the PPIN feature initialization which missed to enable the
functionality when PPIN_CTL was enabled but the MSR locked against
updates.
-----BEGIN PGP SIGNATURE-----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=9W7B
-----END PGP SIGNATURE-----
Merge tag 'ras-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS fixes from Thomas Gleixner:
"Two RAS related fixes:
- Shut down the per CPU thermal throttling poll work properly when a
CPU goes offline.
The missing shutdown caused the poll work to be migrated to a
unbound worker which triggered warnings about the usage of
smp_processor_id() in preemptible context
- Fix the PPIN feature initialization which missed to enable the
functionality when PPIN_CTL was enabled but the MSR locked against
updates"
* tag 'ras-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Fix logic and comments around MSR_PPIN_CTL
x86/mce/therm_throt: Undo thermal polling properly on CPU offline
The value in "new" is constructed from "old" such that all bits defined
as reserved by the ACPI spec[1] are left untouched. But if those bits
do not happen to be all zero, "new < 3" will not evaluate to true.
The firmware of the laptop(s) Medion MD63490 / Akoya P15648 comes with
garbage inside the "FACS" ACPI table. The starting value is
old=0x4944454d, therefore new=0x4944454e, which is >= 3. Mask off
the reserved bits.
[1] https://uefi.org/sites/default/files/resources/ACPI_6_2.pdf
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206553
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Jan Engelhardt <jengelh@inai.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
BGRT is for displaying seamless OEM logo from booting to login screen;
however, this mechanism does not always work well on all configurations
and the OEM logo can be displayed multiple times. This looks worse than
without BGRT enabled.
This patch adds a kernel parameter to disable BGRT in boot time. This is
easier than re-compiling a kernel with CONFIG_ACPI_BGRT disabled.
Signed-off-by: Alex Hung <alex.hung@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
g++ insists that function declaration must start with extern "C"
(which asmlinkage expands to).
gcc doesn't care.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The vector management code assumes that managed interrupts cannot be
migrated away from an online CPU. free_moved_vector() has a WARN_ON_ONCE()
which triggers when a managed interrupt vector association on a online CPU
is cleared. The CPU offline code uses a different mechanism which cannot
trigger this.
This assumption is not longer correct because the new CPU isolation feature
which affects the placement of managed interrupts must be able to move a
managed interrupt away from an online CPU.
There are two reasons why this can happen:
1) When the interrupt is activated the affinity mask which was
established in irq_create_affinity_masks() is handed in to
the vector allocation code. This mask contains all CPUs to which
the interrupt can be made affine to, but this does not take the
CPU isolation 'managed_irq' mask into account.
When the interrupt is finally requested by the device driver then the
affinity is checked again and the CPU isolation 'managed_irq' mask is
taken into account, which moves the interrupt to a non-isolated CPU if
possible.
2) The interrupt can be affine to an isolated CPU because the
non-isolated CPUs in the calculated affinity mask are not online.
Once a non-isolated CPU which is in the mask comes online the
interrupt is migrated to this non-isolated CPU
In both cases the regular online migration mechanism is used which triggers
the WARN_ON_ONCE() in free_moved_vector().
Case #1 could have been addressed by taking the isolation mask into
account, but that would require a massive code change in the activation
logic and the eventual migration event was accepted as a reasonable
tradeoff when the isolation feature was developed. But even if #1 would be
addressed, #2 would still trigger it.
Of course the warning in free_moved_vector() was overlooked at that time
and the above two cases which have been discussed during patch review have
obviously never been tested before the final submission.
So keep it simple and remove the warning.
[ tglx: Rewrote changelog and added a comment to free_moved_vector() ]
Fixes: 11ea68f553 ("genirq, sched/isolation: Isolate from handling managed interrupts")
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lkml.kernel.org/r/20200312205830.81796-1-peterx@redhat.com
Every time a new architecture defines the IMA architecture specific
functions - arch_ima_get_secureboot() and arch_ima_get_policy(), the IMA
include file needs to be updated. To avoid this "noise", this patch
defines a new IMA Kconfig IMA_SECURE_AND_OR_TRUSTED_BOOT option, allowing
the different architectures to select it.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Philipp Rudo <prudo@linux.ibm.com> (s390)
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Family 19h CPUs are Zen-based and still share most architectural
features with Family 17h CPUs, and therefore still need to call
init_amd_zn() e.g., to set the RECLAIM_DISTANCE override.
init_amd_zn() also sets X86_FEATURE_ZEN, which today is only used
in amd_set_core_ssb_state(), which isn't called on some late
model Family 17h CPUs, nor on any Family 19h CPUs:
X86_FEATURE_AMD_SSBD replaces X86_FEATURE_LS_CFG_SSBD on those
later model CPUs, where the SSBD mitigation is done via the
SPEC_CTRL MSR instead of the LS_CFG MSR.
Family 19h CPUs also don't have the erratum where the CPB feature
bit isn't set, but that code can stay unchanged and run safely
on Family 19h.
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200311191451.13221-1-kim.phillips@amd.com
The "Intel 64 and IA-32 Architectures Software Developer’s Manual Volume 4:
Model-Specific Registers" has the following table for the values from
freq_desc_byt:
000B: 083.3 MHz
001B: 100.0 MHz
010B: 133.3 MHz
011B: 116.7 MHz
100B: 080.0 MHz
Notice how for e.g the 83.3 MHz value there are 3 significant digits, which
translates to an accuracy of a 1000 ppm, where as a typical crystal
oscillator is 20 - 100 ppm, so the accuracy of the frequency format used in
the Software Developer’s Manual is not really helpful.
As far as we know Bay Trail SoCs use a 25 MHz crystal and Cherry Trail
uses a 19.2 MHz crystal, the crystal is the source clock for a root PLL
which outputs 1600 and 100 MHz. It is unclear if the root PLL outputs are
used directly by the CPU clock PLL or if there is another PLL in between.
This does not matter though, we can model the chain of PLLs as a single PLL
with a quotient equal to the quotients of all PLLs in the chain multiplied.
So we can create a simplified model of the CPU clock setup using a
reference clock of 100 MHz plus a quotient which gets us as close to the
frequency from the SDM as possible.
For the 83.3 MHz example from above this would give 100 MHz * 5 / 6 = 83
and 1/3 MHz, which matches exactly what has been measured on actual
hardware.
Use a simplified PLL model with a reference clock of 100 MHz for all Bay
and Cherry Trail models.
This has been tested on the following models:
CPU freq before: CPU freq after:
Intel N2840 2165.800 MHz 2166.667 MHz
Intel Z3736 1332.800 MHz 1333.333 MHz
Intel Z3775 1466.300 MHz 1466.667 MHz
Intel Z8350 1440.000 MHz 1440.000 MHz
Intel Z8750 1600.000 MHz 1600.000 MHz
This fixes the time drifting by about 1 second per hour (20 - 30 seconds
per day) on (some) devices which rely on the tsc_msr.c code to determine
the TSC frequency.
Reported-by: Vipul Kumar <vipulk0511@gmail.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200223140610.59612-3-hdegoede@redhat.com
According to the "Intel 64 and IA-32 Architectures Software Developer's
Manual Volume 4: Model-Specific Registers" on Cherry Trail (Airmont)
devices the 4 lowest bits of the MSR_FSB_FREQ mask indicate the bus freq
unlike on e.g. Bay Trail where only the lowest 3 bits are used.
This is also the reason why MAX_NUM_FREQS is defined as 9, since Cherry
Trail SoCs have 9 possible frequencies, so the lo value from the MSR needs
to be masked with 0x0f, not with 0x07 otherwise the 9th frequency will get
interpreted as the 1st.
Bump MAX_NUM_FREQS to 16 to avoid any possibility of addressing the array
out of bounds and makes the mask part of the cpufreq struct so it can be
set it per model.
While at it also log an error when the index points to an uninitialized
part of the freqs lookup-table.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200223140610.59612-2-hdegoede@redhat.com
Use named struct initializers for the freq_desc struct-s initialization
and change the "u8 msr_plat" to a "bool use_msr_plat" to make its meaning
more clear instead of relying on a comment to explain it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200223140610.59612-1-hdegoede@redhat.com
We have had a hard coded limit of 32 machine check records since the
dawn of time. But as numbers of cores increase, it is possible for
more than 32 errors to be reported before a user process reads from
/dev/mcelog. In this case the additional errors are lost.
Keep 32 as the minimum. But tune the maximum value up based on the
number of processors.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200218184408.GA23048@agluck-desk2.amr.corp.intel.com
Sathyanarayanan reported that the PCI-E AER error injection mechanism
can result in a NULL pointer dereference in apic_ack_edge():
BUG: unable to handle kernel NULL pointer dereference at 0000000000000078
RIP: 0010:apic_ack_edge+0x1e/0x40
Call Trace:
handle_edge_irq+0x7d/0x1e0
generic_handle_irq+0x27/0x30
aer_inject_write+0x53a/0x720
It crashes in irq_complete_move() which dereferences get_irq_regs() which
is obviously NULL when this is called from non interrupt context.
Of course the pointer could be checked, but that just papers over the real
issue. Invoking the low level interrupt handling mechanism from random code
can wreckage the fragile interrupt affinity mechanism of x86 as interrupts
can only be moved in interrupt context or with special care when a CPU goes
offline and the move has to be enforced.
In the best case this triggers the warning in the MSI affinity setter, but
if the call happens on the correct CPU it just corrupts state and might
prevent further interrupt delivery for the affected device.
Mark the APIC interrupts as unsuitable for being invoked in random contexts.
This prevents the AER injection from proliferating the wreckage, but that's
less broken than the current state of affairs and more correct than just
papering over the problem by sprinkling random checks all over the place
and silently corrupting state.
Reported-by: sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200306130623.684591280@linutronix.de
code32_start is meant for 16-bit real-mode bootloaders to inform the
kernel where the 32-bit protected mode code starts. Nothing in the
protected mode kernel except the EFI stub uses it.
efi_main() currently returns boot_params, with code32_start set inside it
to tell efi_stub_entry() where startup_32 is located. Since it was invoked
by efi_stub_entry() in the first place, boot_params is already known.
Return the address of startup_32 instead.
This will allow a 64-bit kernel to live above 4Gb, for example, and it's
cleaner as well.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200301230436.2246909-5-nivedita@alum.mit.edu
Link: https://lore.kernel.org/r/20200308080859.21568-13-ardb@kernel.org
Pull x86 fixes from Ingo Molnar:
"Misc fixes: a pkeys fix for a bug that triggers with weird BIOS
settings, and two Xen PV fixes: a paravirt interface fix, and
pagetable dumping fix"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Fix dump_pagetables with Xen PV
x86/ioperm: Add new paravirt function update_io_bitmap()
x86/pkeys: Manually set X86_FEATURE_OSPKE to preserve existing changes
as too large frame sizes on some configurations. On the
ARM side, the compiler was messing up shadow stacks between
EL1 and EL2 code, which is easily fixed with __always_inline.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJeXAT4AAoJEL/70l94x66DWywH/1kv4MmeGo6PI0Nxk/yvA7X8
78iqIBchtxZX0v/9kqpTB7bYmHyTgmZHM+IkwtIUANDSaOvWqJwU+TLUfduOiuXF
NxBHcZDyuMoftX5CSQ+bJ5PwxKijAdJsIkCZ13CnsTCkwcfamSGypFUCK8LacPeq
WHvV5Ws5pFc51xrP3CH1DrRhLoulaBmt5xxqK9fxWtslrlsnm1uNza5vs8As8CzM
apnmdRIf5p4v91Zic3PFH7/GXES0m1tjIBKdtZ4YHb8yrXV/kBsEVhhTjqE9mrUq
qtRRl5waOFoP4yc9ey52PAbMm1x1Ho/pyunpM0xh40Yq8OPFwqXBPTnWfobSoiM=
=LNQc
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"More bugfixes, including a few remaining "make W=1" issues such as too
large frame sizes on some configurations.
On the ARM side, the compiler was messing up shadow stacks between EL1
and EL2 code, which is easily fixed with __always_inline"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: VMX: check descriptor table exits on instruction emulation
kvm: x86: Limit the number of "kvm: disabled by bios" messages
KVM: x86: avoid useless copy of cpufreq policy
KVM: allow disabling -Werror
KVM: x86: allow compiling as non-module with W=1
KVM: Pre-allocate 1 cpumask variable per cpu for both pv tlb and pv ipis
KVM: Introduce pv check helpers
KVM: let declaration of kvm_get_running_vcpus match implementation
KVM: SVM: allocate AVIC data structures based on kvm_amd module parameter
arm64: Ask the compiler to __always_inline functions used by KVM at HYP
KVM: arm64: Define our own swab32() to avoid a uapi static inline
KVM: arm64: Ask the compiler to __always_inline functions used at HYP
kvm: arm/arm64: Fold VHE entry/exit work into kvm_vcpu_run_vhe()
KVM: arm/arm64: Fix up includes for trace.h
Commit 111e7b15cf ("x86/ioperm: Extend IOPL config to control ioperm()
as well") reworked the iopl syscall to use I/O bitmaps.
Unfortunately this broke Xen PV domains using that syscall as there is
currently no I/O bitmap support in PV domains.
Add I/O bitmap support via a new paravirt function update_io_bitmap which
Xen PV domains can use to update their I/O bitmaps via a hypercall.
Fixes: 111e7b15cf ("x86/ioperm: Extend IOPL config to control ioperm() as well")
Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Cc: <stable@vger.kernel.org> # 5.5
Link: https://lkml.kernel.org/r/20200218154712.25490-1-jgross@suse.com
Nick Desaulniers Reported:
When building with:
$ make CC=clang arch/x86/ CFLAGS=-Wframe-larger-than=1000
The following warning is observed:
arch/x86/kernel/kvm.c:494:13: warning: stack frame size of 1064 bytes in
function 'kvm_send_ipi_mask_allbutself' [-Wframe-larger-than=]
static void kvm_send_ipi_mask_allbutself(const struct cpumask *mask, int
vector)
^
Debugging with:
https://github.com/ClangBuiltLinux/frame-larger-than
via:
$ python3 frame_larger_than.py arch/x86/kernel/kvm.o \
kvm_send_ipi_mask_allbutself
points to the stack allocated `struct cpumask newmask` in
`kvm_send_ipi_mask_allbutself`. The size of a `struct cpumask` is
potentially large, as it's CONFIG_NR_CPUS divided by BITS_PER_LONG for
the target architecture. CONFIG_NR_CPUS for X86_64 can be as high as
8192, making a single instance of a `struct cpumask` 1024 B.
This patch fixes it by pre-allocate 1 cpumask variable per cpu and use it for
both pv tlb and pv ipis..
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce some pv check helpers for consistency.
Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are two implemented bits in the PPIN_CTL MSR:
Bit 0: LockOut (R/WO)
Set 1 to prevent further writes to MSR_PPIN_CTL.
Bit 1: Enable_PPIN (R/W)
If 1, enables MSR_PPIN to be accessible using RDMSR.
If 0, an attempt to read MSR_PPIN will cause #GP.
So there are four defined values:
0: PPIN is disabled, PPIN_CTL may be updated
1: PPIN is disabled. PPIN_CTL is locked against updates
2: PPIN is enabled. PPIN_CTL may be updated
3: PPIN is enabled. PPIN_CTL is locked against updates
Code would only enable the X86_FEATURE_INTEL_PPIN feature for case "2".
When it should have done so for both case "2" and case "3".
Fix the final test to just check for the enable bit. Also fix some of
the other comments in this function.
Fixes: 3f5a7896a5 ("x86/mce: Include the PPIN in MCE records when available")
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200226011737.9958-1-tony.luck@intel.com
Explicitly set X86_FEATURE_OSPKE via set_cpu_cap() instead of calling
get_cpu_cap() to pull the feature bit from CPUID after enabling CR4.PKE.
Invoking get_cpu_cap() effectively wipes out any {set,clear}_cpu_cap()
changes that were made between this_cpu->c_init() and setup_pku(), as
all non-synthetic feature words are reinitialized from the CPU's CPUID
values.
Blasting away capability updates manifests most visibility when running
on a VMX capable CPU, but with VMX disabled by BIOS. To indicate that
VMX is disabled, init_ia32_feat_ctl() clears X86_FEATURE_VMX, using
clear_cpu_cap() instead of setup_clear_cpu_cap() so that KVM can report
which CPU is misconfigured (KVM needs to probe every CPU anyways).
Restoring X86_FEATURE_VMX from CPUID causes KVM to think VMX is enabled,
ultimately leading to an unexpected #GP when KVM attempts to do VMXON.
Arguably, init_ia32_feat_ctl() should use setup_clear_cpu_cap() and let
KVM figure out a different way to report the misconfigured CPU, but VMX
is not the only feature bit that is affected, i.e. there is precedent
that tweaking feature bits via {set,clear}_cpu_cap() after ->c_init()
is expected to work. Most notably, x86_init_rdrand()'s clearing of
X86_FEATURE_RDRAND when RDRAND malfunctions is also overwritten.
Fixes: 0697694564 ("x86/mm/pkeys: Actually enable Memory Protection Keys in the CPU")
Reported-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200226231615.13664-1-sean.j.christopherson@intel.com
#BP is not longer using IST and using ist_enter() and ist_exit() makes it
harder to change ist_enter() and ist_exit()'s behavior. Instead open-code
the very small amount of required logic.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200225220217.150607679@linutronix.de
That function returns immediately after conditionally reenabling interrupts which
is more than pointless and requires the ASM code to disable interrupts again.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20191023123117.871608831@linutronix.de
Link: https://lkml.kernel.org/r/20200225220216.518575042@linutronix.de
Remove the pointless difference between 32 and 64 bit to make further
unifications simpler.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200225220216.428188397@linutronix.de
