forked from Minki/linux
38608ee7b6
17 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Arnd Bergmann
|
967747bbc0 |
uaccess: remove CONFIG_SET_FS
There are no remaining callers of set_fs(), so CONFIG_SET_FS can be removed globally, along with the thread_info field and any references to it. This turns access_ok() into a cheaper check against TASK_SIZE_MAX. As CONFIG_SET_FS is now gone, drop all remaining references to set_fs()/get_fs(), mm_segment_t, user_addr_max() and uaccess_kernel(). Acked-by: Sam Ravnborg <sam@ravnborg.org> # for sparc32 changes Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Tested-by: Sergey Matyukevich <sergey.matyukevich@synopsys.com> # for arc changes Acked-by: Stafford Horne <shorne@gmail.com> # [openrisc, asm-generic] Acked-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Daniel Xu
|
6fa6d28051 |
lib/strncpy_from_user.c: Mask out bytes after NUL terminator.
do_strncpy_from_user() may copy some extra bytes after the NUL
terminator into the destination buffer. This usually does not matter for
normal string operations. However, when BPF programs key BPF maps with
strings, this matters a lot.
A BPF program may read strings from user memory by calling the
bpf_probe_read_user_str() helper which eventually calls
do_strncpy_from_user(). The program can then key a map with the
destination buffer. BPF map keys are fixed-width and string-agnostic,
meaning that map keys are treated as a set of bytes.
The issue is when do_strncpy_from_user() overcopies bytes after the NUL
terminator, it can result in seemingly identical strings occupying
multiple slots in a BPF map. This behavior is subtle and totally
unexpected by the user.
This commit masks out the bytes following the NUL while preserving
long-sized stride in the fast path.
Fixes:
|
||
Albert van der Linde
|
4d0e9df5e4 |
lib, uaccess: add failure injection to usercopy functions
To test fault-tolerance of user memory access functions, introduce fault injection to usercopy functions. If a failure is expected return either -EFAULT or the total amount of bytes that were not copied. Signed-off-by: Albert van der Linde <alinde@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Akinobu Mita <akinobu.mita@gmail.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20200831171733.955393-3-alinde@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
KP Singh
|
0788735899 |
lib: Add might_fault() to strncpy_from_user.
When updating a piece of broken logic from using get_user to strncpy_from_user, we noticed that a warning which is expected when calling a function that might fault from an atomic context with pagefaults enabled disappeared. Not having this warning in place can lead to calling strncpy_from_user from an atomic context and eventually kernel crashes/stack corruption. Signed-off-by: KP Singh <kpsingh@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Jann Horn <jannh@google.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20200414225705.255711-1-kpsingh@chromium.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Christophe Leroy
|
41cd780524 |
uaccess: Selectively open read or write user access
When opening user access to only perform reads, only open read access. When opening user access to only perform writes, only open write access. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/2e73bc57125c2c6ab12a587586a4eed3a47105fc.1585898438.git.christophe.leroy@c-s.fr |
||
|
Christophe Leroy
|
ab10ae1c3b |
lib: Reduce user_access_begin() boundaries in strncpy_from_user() and strnlen_user()
The range passed to user_access_begin() by strncpy_from_user() and
strnlen_user() starts at 'src' and goes up to the limit of userspace
although reads will be limited by the 'count' param.
On 32 bits powerpc (book3s/32) access has to be granted for each
256Mbytes segment and the cost increases with the number of segments to
unlock.
Limit the range with 'count' param.
Fixes:
|
||
Andrey Konovalov
|
903f433f8f |
lib: untag user pointers in strn*_user
Patch series "arm64: untag user pointers passed to the kernel", v19. === Overview arm64 has a feature called Top Byte Ignore, which allows to embed pointer tags into the top byte of each pointer. Userspace programs (such as HWASan, a memory debugging tool [1]) might use this feature and pass tagged user pointers to the kernel through syscalls or other interfaces. Right now the kernel is already able to handle user faults with tagged pointers, due to these patches: 1. |
||
Peter Zijlstra
|
29da93fea3 |
mm/uaccess: Use 'unsigned long' to placate UBSAN warnings on older GCC versions
Randy reported objtool triggered on his (GCC-7.4) build: lib/strncpy_from_user.o: warning: objtool: strncpy_from_user()+0x315: call to __ubsan_handle_add_overflow() with UACCESS enabled lib/strnlen_user.o: warning: objtool: strnlen_user()+0x337: call to __ubsan_handle_sub_overflow() with UACCESS enabled This is due to UBSAN generating signed-overflow-UB warnings where it should not. Prior to GCC-8 UBSAN ignored -fwrapv (which the kernel uses through -fno-strict-overflow). Make the functions use 'unsigned long' throughout. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: luto@kernel.org Link: http://lkml.kernel.org/r/20190424072208.754094071@infradead.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
Linus Torvalds
|
594cc251fd |
make 'user_access_begin()' do 'access_ok()'
Originally, the rule used to be that you'd have to do access_ok() separately, and then user_access_begin() before actually doing the direct (optimized) user access. But experience has shown that people then decide not to do access_ok() at all, and instead rely on it being implied by other operations or similar. Which makes it very hard to verify that the access has actually been range-checked. If you use the unsafe direct user accesses, hardware features (either SMAP - Supervisor Mode Access Protection - on x86, or PAN - Privileged Access Never - on ARM) do force you to use user_access_begin(). But nothing really forces the range check. By putting the range check into user_access_begin(), we actually force people to do the right thing (tm), and the range check vill be visible near the actual accesses. We have way too long a history of people trying to avoid them. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Greg Kroah-Hartman
|
b24413180f |
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Mark Rutland
|
bf90e56e46 |
lib: harden strncpy_from_user
The strncpy_from_user() accessor is effectively a copy_from_user() specialised to copy strings, terminating early at a NUL byte if possible. In other respects it is identical, and can be used to copy an arbitrarily large buffer from userspace into the kernel. Conceptually, it exposes a similar attack surface. As with copy_from_user(), we check the destination range when the kernel is built with KASAN, but unlike copy_from_user() we do not check the destination buffer when using HARDENED_USERCOPY. As strncpy_from_user() calls get_user() in a loop, we must call check_object_size() explicitly. This patch adds this instrumentation to strncpy_from_user(), per the same rationale as with the regular copy_from_user(). In the absence of hardened usercopy this will have no impact as the instrumentation expands to an empty static inline function. Link: http://lkml.kernel.org/r/1472221903-31181-1-git-send-email-mark.rutland@arm.com Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
1bd4403d86 |
unsafe_[get|put]_user: change interface to use a error target label
When I initially added the unsafe_[get|put]_user() helpers in commit
|
||
Andrey Ryabinin
|
1771c6e1a5 |
x86/kasan: instrument user memory access API
Exchange between user and kernel memory is coded in assembly language. Which means that such accesses won't be spotted by KASAN as a compiler instruments only C code. Add explicit KASAN checks to user memory access API to ensure that userspace writes to (or reads from) a valid kernel memory. Note: Unlike others strncpy_from_user() is written mostly in C and KASAN sees memory accesses in it. However, it makes sense to add explicit check for all @count bytes that *potentially* could be written to the kernel. [aryabinin@virtuozzo.com: move kasan check under the condition] Link: http://lkml.kernel.org/r/1462869209-21096-1-git-send-email-aryabinin@virtuozzo.com Link: http://lkml.kernel.org/r/1462538722-1574-4-git-send-email-aryabinin@virtuozzo.com Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
9fd4470ff4 |
Use the new batched user accesses in generic user string handling
This converts the generic user string functions to use the batched user access functions. It makes a big difference on Skylake, which is the first x86 microarchitecture to implement SMAP. The STAC/CLAC instructions are not very fast, and doing them for each access inside the loop that copies strings from user space (which is what the pathname handling does for every pathname the kernel uses, for example) is very inefficient. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Rasmus Villemoes
|
bf3c2d6d2f |
lib/strncpy_from_user.c: replace module.h include
strncpy_from_user.c only needs EXPORT_SYMBOL, so just include compiler.h and export.h instead of the whole module.h machinery. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
36126f8f2e |
word-at-a-time: make the interfaces truly generic
This changes the interfaces in <asm/word-at-a-time.h> to be a bit more complicated, but a lot more generic. In particular, it allows us to really do the operations efficiently on both little-endian and big-endian machines, pretty much regardless of machine details. For example, if you can rely on a fast population count instruction on your architecture, this will allow you to make your optimized <asm/word-at-a-time.h> file with that. NOTE! The "generic" version in include/asm-generic/word-at-a-time.h is not truly generic, it actually only works on big-endian. Why? Because on little-endian the generic algorithms are wasteful, since you can inevitably do better. The x86 implementation is an example of that. (The only truly non-generic part of the asm-generic implementation is the "find_zero()" function, and you could make a little-endian version of it. And if the Kbuild infrastructure allowed us to pick a particular header file, that would be lovely) The <asm/word-at-a-time.h> functions are as follows: - WORD_AT_A_TIME_CONSTANTS: specific constants that the algorithm uses. - has_zero(): take a word, and determine if it has a zero byte in it. It gets the word, the pointer to the constant pool, and a pointer to an intermediate "data" field it can set. This is the "quick-and-dirty" zero tester: it's what is run inside the hot loops. - "prep_zero_mask()": take the word, the data that has_zero() produced, and the constant pool, and generate an *exact* mask of which byte had the first zero. This is run directly *outside* the loop, and allows the "has_zero()" function to answer the "is there a zero byte" question without necessarily getting exactly *which* byte is the first one to contain a zero. If you do multiple byte lookups concurrently (eg "hash_name()", which looks for both NUL and '/' bytes), after you've done the prep_zero_mask() phase, the result of those can be or'ed together to get the "either or" case. - The result from "prep_zero_mask()" can then be fed into "find_zero()" (to find the byte offset of the first byte that was zero) or into "zero_bytemask()" (to find the bytemask of the bytes preceding the zero byte). The existence of zero_bytemask() is optional, and is not necessary for the normal string routines. But dentry name hashing needs it, so if you enable DENTRY_WORD_AT_A_TIME you need to expose it. This changes the generic strncpy_from_user() function and the dentry hashing functions to use these modified word-at-a-time interfaces. This gets us back to the optimized state of the x86 strncpy that we lost in the previous commit when moving over to the generic version. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
David S. Miller
|
2922585b93 |
lib: Sparc's strncpy_from_user is generic enough, move under lib/
To use this, an architecture simply needs to: 1) Provide a user_addr_max() implementation via asm/uaccess.h 2) Add "select GENERIC_STRNCPY_FROM_USER" to their arch Kcnfig 3) Remove the existing strncpy_from_user() implementation and symbol exports their architecture had. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: David Howells <dhowells@redhat.com> |