Create a test that changes a VLAN ID from 200 to 300.
We also need to modify the preferences of the filters installed for the
other rules so that they are unique, because we now install the "tc-vlan
modify" filter in VCAP IS1 only temporarily, and we need to perform the
deletion by filter preference number.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rename into test_tc_redirect.sh and move setup and test code into separate
functions so they can be reused for newly added tests in here. Also remove
the crude hack to override ifindex inside the object file via xxd and sed
and just use a simple map instead. Map given iproute2 does not support BTF
fully and therefore neither global data at this point.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20201010234006.7075-6-daniel@iogearbox.net
Recent work in f4d0525921 ("bpf: Add map_meta_equal map ops") and 134fede4ee
("bpf: Relax max_entries check for most of the inner map types") added support
for dynamic inner max elements for most map-in-map types. Exceptions were maps
like array or prog array where the map_gen_lookup() callback uses the maps'
max_entries field as a constant when emitting instructions.
We recently implemented Maglev consistent hashing into Cilium's load balancer
which uses map-in-map with an outer map being hash and inner being array holding
the Maglev backend table for each service. This has been designed this way in
order to reduce overall memory consumption given the outer hash map allows to
avoid preallocating a large, flat memory area for all services. Also, the
number of service mappings is not always known a-priori.
The use case for dynamic inner array map entries is to further reduce memory
overhead, for example, some services might just have a small number of back
ends while others could have a large number. Right now the Maglev backend table
for small and large number of backends would need to have the same inner array
map entries which adds a lot of unneeded overhead.
Dynamic inner array map entries can be realized by avoiding the inlined code
generation for their lookup. The lookup will still be efficient since it will
be calling into array_map_lookup_elem() directly and thus avoiding retpoline.
The patch adds a BPF_F_INNER_MAP flag to map creation which therefore skips
inline code generation and relaxes array_map_meta_equal() check to ignore both
maps' max_entries. This also still allows to have faster lookups for map-in-map
when BPF_F_INNER_MAP is not specified and hence dynamic max_entries not needed.
Example code generation where inner map is dynamic sized array:
# bpftool p d x i 125
int handle__sys_enter(void * ctx):
; int handle__sys_enter(void *ctx)
0: (b4) w1 = 0
; int key = 0;
1: (63) *(u32 *)(r10 -4) = r1
2: (bf) r2 = r10
;
3: (07) r2 += -4
; inner_map = bpf_map_lookup_elem(&outer_arr_dyn, &key);
4: (18) r1 = map[id:468]
6: (07) r1 += 272
7: (61) r0 = *(u32 *)(r2 +0)
8: (35) if r0 >= 0x3 goto pc+5
9: (67) r0 <<= 3
10: (0f) r0 += r1
11: (79) r0 = *(u64 *)(r0 +0)
12: (15) if r0 == 0x0 goto pc+1
13: (05) goto pc+1
14: (b7) r0 = 0
15: (b4) w6 = -1
; if (!inner_map)
16: (15) if r0 == 0x0 goto pc+6
17: (bf) r2 = r10
;
18: (07) r2 += -4
; val = bpf_map_lookup_elem(inner_map, &key);
19: (bf) r1 = r0 | No inlining but instead
20: (85) call array_map_lookup_elem#149280 | call to array_map_lookup_elem()
; return val ? *val : -1; | for inner array lookup.
21: (15) if r0 == 0x0 goto pc+1
; return val ? *val : -1;
22: (61) r6 = *(u32 *)(r0 +0)
; }
23: (bc) w0 = w6
24: (95) exit
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201010234006.7075-4-daniel@iogearbox.net
Add an efficient ingress to ingress netns switch that can be used out of tc BPF
programs in order to redirect traffic from host ns ingress into a container
veth device ingress without having to go via CPU backlog queue [0]. For local
containers this can also be utilized and path via CPU backlog queue only needs
to be taken once, not twice. On a high level this borrows from ipvlan which does
similar switch in __netif_receive_skb_core() and then iterates via another_round.
This helps to reduce latency for mentioned use cases.
Pod to remote pod with redirect(), TCP_RR [1]:
# percpu_netperf 10.217.1.33
RT_LATENCY: 122.450 (per CPU: 122.666 122.401 122.333 122.401 )
MEAN_LATENCY: 121.210 (per CPU: 121.100 121.260 121.320 121.160 )
STDDEV_LATENCY: 120.040 (per CPU: 119.420 119.910 125.460 115.370 )
MIN_LATENCY: 46.500 (per CPU: 47.000 47.000 47.000 45.000 )
P50_LATENCY: 118.500 (per CPU: 118.000 119.000 118.000 119.000 )
P90_LATENCY: 127.500 (per CPU: 127.000 128.000 127.000 128.000 )
P99_LATENCY: 130.750 (per CPU: 131.000 131.000 129.000 132.000 )
TRANSACTION_RATE: 32666.400 (per CPU: 8152.200 8169.842 8174.439 8169.897 )
Pod to remote pod with redirect_peer(), TCP_RR:
# percpu_netperf 10.217.1.33
RT_LATENCY: 44.449 (per CPU: 43.767 43.127 45.279 45.622 )
MEAN_LATENCY: 45.065 (per CPU: 44.030 45.530 45.190 45.510 )
STDDEV_LATENCY: 84.823 (per CPU: 66.770 97.290 84.380 90.850 )
MIN_LATENCY: 33.500 (per CPU: 33.000 33.000 34.000 34.000 )
P50_LATENCY: 43.250 (per CPU: 43.000 43.000 43.000 44.000 )
P90_LATENCY: 46.750 (per CPU: 46.000 47.000 47.000 47.000 )
P99_LATENCY: 52.750 (per CPU: 51.000 54.000 53.000 53.000 )
TRANSACTION_RATE: 90039.500 (per CPU: 22848.186 23187.089 22085.077 21919.130 )
[0] https://linuxplumbersconf.org/event/7/contributions/674/attachments/568/1002/plumbers_2020_cilium_load_balancer.pdf
[1] https://github.com/borkmann/netperf_scripts/blob/master/percpu_netperf
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201010234006.7075-3-daniel@iogearbox.net
CalledProcessError stores the output of the failed process as `bytes`,
not a `str`.
So when we log it on build error, the make output is all crammed into
one line with "\n" instead of actually printing new lines.
After this change, we get readable output with new lines, e.g.
> CC lib/kunit/kunit-example-test.o
> In file included from ../lib/kunit/test.c:9:
> ../include/kunit/test.h:22:1: error: unknown type name ‘invalid_type_that_causes_compile’
> 22 | invalid_type_that_causes_compile errors;
> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> make[3]: *** [../scripts/Makefile.build:283: lib/kunit/test.o] Error 1
Secondly, trying to concat exceptions to strings will fail with
> TypeError: can only concatenate str (not "OSError") to str
so fix this with an explicit cast to str.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The main purpose of the profiler test to check different llvm generation
patterns to make sure the verifier can load these large programs.
Note that profiler.inc.h test doesn't follow strict kernel coding style.
The code was formatted in the kernel style, but variable declarations are
kept as-is to preserve original llvm IR pattern.
profiler1.c should pass with older and newer llvm
profiler[23].c may fail on older llvm that don't have:
https://reviews.llvm.org/D85570
because llvm may do speculative code motion optimization that
will generate code like this:
// r9 is a pointer to map_value
// r7 is a scalar
17: bf 96 00 00 00 00 00 00 r6 = r9
18: 0f 76 00 00 00 00 00 00 r6 += r7
19: a5 07 01 00 01 01 00 00 if r7 < 257 goto +1
20: bf 96 00 00 00 00 00 00 r6 = r9
// r6 is used here
The verifier will reject such code with the error:
"math between map_value pointer and register with unbounded min value is not allowed"
At insn 18 the r7 is indeed unbounded. The later insn 19 checks the bounds and
the insn 20 undoes map_value addition. It is currently impossible for the
verifier to understand such speculative pointer arithmetic. Hence llvm D85570
addresses it on the compiler side.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20201009011240.48506-4-alexei.starovoitov@gmail.com
The llvm register allocator may use two different registers representing the
same virtual register. In such case the following pattern can be observed:
1047: (bf) r9 = r6
1048: (a5) if r6 < 0x1000 goto pc+1
1050: ...
1051: (a5) if r9 < 0x2 goto pc+66
1052: ...
1053: (bf) r2 = r9 /* r2 needs to have upper and lower bounds */
This is normal behavior of greedy register allocator.
The slides 137+ explain why regalloc introduces such register copy:
http://llvm.org/devmtg/2018-04/slides/Yatsina-LLVM%20Greedy%20Register%20Allocator.pdf
There is no way to tell llvm 'not to do this'.
Hence the verifier has to recognize such patterns.
In order to track this information without backtracking allocate ID
for scalars in a similar way as it's done for find_good_pkt_pointers().
When the verifier encounters r9 = r6 assignment it will assign the same ID
to both registers. Later if either register range is narrowed via conditional
jump propagate the register state into the other register.
Clear register ID in adjust_reg_min_max_vals() for any alu instruction. The
register ID is ignored for scalars in regsafe() and doesn't affect state
pruning. mark_reg_unknown() clears the ID. It's used to process call, endian
and other instructions. Hence ID is explicitly cleared only in
adjust_reg_min_max_vals() and in 32-bit mov.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20201009011240.48506-2-alexei.starovoitov@gmail.com
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter selftests fixes from
Fabian Frederick:
1) Extend selftest nft_meta.sh to check for meta cpu.
2) Fix selftest nft_meta.sh error reporting.
3) Fix shellcheck warnings in selftest nft_meta.sh.
4) Extend selftest nft_meta.sh to check for meta time.
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ld's --build-id defaults to "sha1" style, while lld defaults to "fast".
The build IDs are very different between the two, which may confuse
programs that reference them.
Signed-off-by: Bill Wendling <morbo@google.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Naresh reported that selftests: pidfd: pidfd_wait hangs on linux next kernel on
x86_64, i386 and arm64 Juno-r2
These devices are using NFS mounted rootfs.
I have tested pidfd testcases independently and all test PASS.
The Hang or exit from test run noticed when run by run_kselftest.sh
pidfd_wait.c:208:wait_nonblock:Expected sys_waitid(P_PIDFD, pidfd,
&info, WSTOPPED, NULL) (-1) == 0 (0)
wait_nonblock: Test terminated by assertion
metadata:
git branch: master
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
git commit: e64997027d5f171148687e58b78c8b3c869a6158
git describe: next-20200922
make_kernelversion: 5.9.0-rc6
kernel-config:
http://snapshots.linaro.org/openembedded/lkft/lkft/sumo/intel-core2-32/lkft/linux-next/865/config
The reason for this is a simple race in the selftests, that I overlooked and
which is more likely to hit when there's a lot of processes running on the
system. Basically the child process hasn't SIGSTOPed itself yet but the parent
is already calling waitid() on a O_NONBLOCK pidfd. Since it doesn't find a
WSTOPPED process it returns -EAGAIN correctly.
The fix for this is to move the line where we're removing the O_NONBLOCK
property from the fd before the waitid() WSTOPPED call so we hang until the
child becomes stopped.
Fixes: cd89597bbe ("tests: add waitid() tests for non-blocking pidfds")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Link: https://lkft.validation.linaro.org/scheduler/job/1813223
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Pull KCSAN updates for v5.10 from Paul E. McKenney:
- Improve kernel messages.
- Be more permissive with bitops races under KCSAN_ASSUME_PLAIN_WRITES_ATOMIC=y.
- Optimize debugfs stat counters.
- Introduce the instrument_*read_write() annotations, to provide a
finer description of certain ops - using KCSAN's compound instrumentation.
Use them for atomic RNW and bitops, where appropriate.
Doing this might find new races.
(Depends on the compiler having tsan-compound-read-before-write=1 support.)
- Support atomic built-ins, which will help certain architectures, such as s390.
- Misc enhancements and smaller fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull v5.10 RCU changes from Paul E. McKenney:
- Debugging for smp_call_function().
- Strict grace periods for KASAN. The point of this series is to find
RCU-usage bugs, so the corresponding new RCU_STRICT_GRACE_PERIOD
Kconfig option depends on both DEBUG_KERNEL and RCU_EXPERT, and is
further disabled by dfefault. Finally, the help text includes
a goodly list of scary caveats.
- New smp_call_function() torture test.
- Torture-test updates.
- Documentation updates.
- Miscellaneous fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In case of errors, this message was printed:
(...)
balanced bwidth with unbalanced delay 5233 max 5005 [ fail ]
client exit code 0, server 0
\nnetns ns3-0-EwnkPH socket stat for 10003:
(...)
Obviously, the idea was to add a new line before the socket stat and not
print "\nnetns".
The commit 8b974778f9 ("selftests: mptcp: interpret \n as a new line")
is very similar to this one. But the modification in simult_flows.sh was
missed because this commit above was done in parallel to one here below.
Fixes: 1a418cb8e8 ("mptcp: simult flow self-tests")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add selftests validating libbpf's auto-resizing of load/store instructions
when used with CO-RE relocations. An explicit and manual approach with using
bpf_core_read() is also demonstrated and tested. Separate BPF program is
supposed to fail due to using signed integers of sizes that differ from
kernel's sizes.
To reliably simulate 32-bit BTF (i.e., the one with sizeof(long) ==
sizeof(void *) == 4), selftest generates its own custom BTF and passes it as
a replacement for real kernel BTF. This allows to test 32/64-bitness mix on
all architectures.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201008001025.292064-5-andrii@kernel.org
Add support for patching instructions of the following form:
- rX = *(T *)(rY + <off>);
- *(T *)(rX + <off>) = rY;
- *(T *)(rX + <off>) = <imm>, where T is one of {u8, u16, u32, u64}.
For such instructions, if the actual kernel field recorded in CO-RE relocation
has a different size than the one recorded locally (e.g., from vmlinux.h),
then libbpf will adjust T to an appropriate 1-, 2-, 4-, or 8-byte loads.
In general, such transformation is not always correct and could lead to
invalid final value being loaded or stored. But two classes of cases are
always safe:
- if both local and target (kernel) types are unsigned integers, but of
different sizes, then it's OK to adjust load/store instruction according to
the necessary memory size. Zero-extending nature of such instructions and
unsignedness make sure that the final value is always correct;
- pointer size mismatch between BPF target architecture (which is always
64-bit) and 32-bit host kernel architecture can be similarly resolved
automatically, because pointer is essentially an unsigned integer. Loading
32-bit pointer into 64-bit BPF register with zero extension will leave
correct pointer in the register.
Both cases are necessary to support CO-RE on 32-bit kernels, as `unsigned
long` in vmlinux.h generated from 32-bit kernel is 32-bit, but when compiled
with BPF program for BPF target it will be treated by compiler as 64-bit
integer. Similarly, pointers in vmlinux.h are 32-bit for kernel, but treated
as 64-bit values by compiler for BPF target. Both problems are now resolved by
libbpf for direct memory reads.
But similar transformations are useful in general when kernel fields are
"resized" from, e.g., unsigned int to unsigned long (or vice versa).
Now, similar transformations for signed integers are not safe to perform as
they will result in incorrect sign extension of the value. If such situation
is detected, libbpf will emit helpful message and will poison the instruction.
Not failing immediately means that it's possible to guard the instruction
based on kernel version (or other conditions) and make sure it's not
reachable.
If there is a need to read signed integers that change sizes between different
kernels, it's possible to use BPF_CORE_READ_BITFIELD() macro, which works both
with bitfields and non-bitfield integers of any signedness and handles
sign-extension properly. Also, bpf_core_read() with proper size and/or use of
bpf_core_field_size() relocation could allow to deal with such complicated
situations explicitly, if not so conventiently as direct memory reads.
Selftests added in a separate patch in progs/test_core_autosize.c demonstrate
both direct memory and probed use cases.
BPF_CORE_READ() is not changed and it won't deal with such situations as
automatically as direct memory reads due to the signedness integer
limitations, which are much harder to detect and control with compiler macro
magic. So it's encouraged to utilize direct memory reads as much as possible.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201008001025.292064-3-andrii@kernel.org
Bypass CO-RE relocations step for BPF programs that are not going to be
loaded. This allows to have BPF programs compiled in and disabled dynamically
if kernel is not supposed to provide enough relocation information. In such
case, there won't be unnecessary warnings about failed relocations.
Fixes: d929758101 ("libbpf: Support disabling auto-loading BPF programs")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201008001025.292064-2-andrii@kernel.org
The reported base-freq high-priority-cpu-list was potentially omitting
some cpus, due to incorrectly using a logical core count to constrain
the size of a physical punit core ID mask. We may need to read both high
and low PBF CORE_MASK values regardless of the logical core count.
Signed-off-by: Jonathan Doman <jonathan.doman@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Fix a compatibility problem when the old XDP_SHARED_UMEM mode is used
together with the xsk_socket__create() call. In the old XDP_SHARED_UMEM
mode, only sharing of the same device and queue id was allowed, and
in this mode, the fill ring and completion ring were shared between
the AF_XDP sockets.
Therefore, it was perfectly fine to call the xsk_socket__create() API
for each socket and not use the new xsk_socket__create_shared() API.
This behavior was ruined by the commit introducing XDP_SHARED_UMEM
support between different devices and/or queue ids. This patch restores
the ability to use xsk_socket__create in these circumstances so that
backward compatibility is not broken.
Fixes: 2f6324a393 ("libbpf: Support shared umems between queues and devices")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/1602070946-11154-1-git-send-email-magnus.karlsson@gmail.com
Currently with run_kselftest.sh there is no way to choose which test
we could run. All the tests listed in kselftest-list.txt are all run
every time. This patch enhanced the run_kselftest.sh to make the test
collections (or tests) individually selectable. e.g.:
$ ./run_kselftest.sh -c seccomp -t timers:posix_timers -t timers:nanosleep
Additionally adds a way to list all known tests with "-l", usage
with "-h", and perform a dry run without running tests with "-n".
Co-developed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Instead of building a script on the fly (which just repeats the same
thing for each test collection), move the script out of the Makefile and
into run_kselftest.sh, which reads kselftest-list.txt.
Adjust the emit_tests target to report each test on a separate line so
that test running tools (e.g. LAVA) can easily remove individual
tests (for example, as seen in [1]).
[1] 2e7b62155e
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Late patches for 5.10: MTE selftests, minor KCSAN preparation and removal
of some unused prototypes.
(Amit Daniel Kachhap and others)
* for-next/late-arrivals:
arm64: random: Remove no longer needed prototypes
arm64: initialize per-cpu offsets earlier
kselftest/arm64: Check mte tagged user address in kernel
kselftest/arm64: Verify KSM page merge for MTE pages
kselftest/arm64: Verify all different mmap MTE options
kselftest/arm64: Check forked child mte memory accessibility
kselftest/arm64: Verify mte tag inclusion via prctl
kselftest/arm64: Add utilities and a test to validate mte memory
If a bitmap needs to be allocated, and then by the time the thread
is scheduled to be run again all the indices which would satisfy the
allocation have been allocated then we would leak the allocation. Almost
impossible to hit in practice, but a trivial fix. Found by Coverity.
Fixes: f32f004cdd ("ida: Convert to XArray")
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
It was reported that 'perf stat' crashed when using with armv8_pmu (CPU)
events with the task mode. As 'perf stat' uses an empty cpu map for
task mode but armv8_pmu has its own cpu mask, it has confused which map
it should use when accessing file descriptors and this causes segfaults:
(gdb) bt
#0 0x0000000000603fc8 in perf_evsel__close_fd_cpu (evsel=<optimized out>,
cpu=<optimized out>) at evsel.c:122
#1 perf_evsel__close_cpu (evsel=evsel@entry=0x716e950, cpu=7) at evsel.c:156
#2 0x00000000004d4718 in evlist__close (evlist=0x70a7cb0) at util/evlist.c:1242
#3 0x0000000000453404 in __run_perf_stat (argc=3, argc@entry=1, argv=0x30,
argv@entry=0xfffffaea2f90, run_idx=119, run_idx@entry=1701998435)
at builtin-stat.c:929
#4 0x0000000000455058 in run_perf_stat (run_idx=1701998435, argv=0xfffffaea2f90,
argc=1) at builtin-stat.c:947
#5 cmd_stat (argc=1, argv=0xfffffaea2f90) at builtin-stat.c:2357
#6 0x00000000004bb888 in run_builtin (p=p@entry=0x9764b8 <commands+288>,
argc=argc@entry=4, argv=argv@entry=0xfffffaea2f90) at perf.c:312
#7 0x00000000004bbb54 in handle_internal_command (argc=argc@entry=4,
argv=argv@entry=0xfffffaea2f90) at perf.c:364
#8 0x0000000000435378 in run_argv (argcp=<synthetic pointer>,
argv=<synthetic pointer>) at perf.c:408
#9 main (argc=4, argv=0xfffffaea2f90) at perf.c:538
To fix this, I simply used the given cpu map unless the evsel actually
is not a system-wide event (like uncore events).
Fixes: 7736627b86 ("perf stat: Use affinity for closing file descriptors")
Reported-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Barry Song <song.bao.hua@hisilicon.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201007081311.1831003-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 4976b718c3 ("bpf: Introduce pseudo_btf_id") switched
the order of check_subprogs() and resolve_pseudo_ldimm() in
the verifier. Now an empty prog expects to see the error "last
insn is not an the prog of a single invalid ldimm exit or jmp"
instead, because the check for subprogs comes first. It's now
pointless to validate that half of ldimm64 won't be the last
instruction.
Tested:
# ./test_verifier
Summary: 1129 PASSED, 537 SKIPPED, 0 FAILED
and the full set of bpf selftests.
Fixes: 4976b718c3 ("bpf: Introduce pseudo_btf_id")
Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201007022857.2791884-1-haoluo@google.com
bpf_program__set_attach_target(prog, fd, ...) will always fail when
fd = 0 (attach to a kernel symbol) because obj->btf_vmlinux is NULL
and there is no way to set it (at the moment btf_vmlinux is meant
to be temporary storage for use in bpf_object__load_xattr()).
Fix this by using libbpf_find_vmlinux_btf_id().
At some point we may want to opportunistically cache btf_vmlinux
so it can be reused with multiple programs.
Signed-off-by: Luigi Rizzo <lrizzo@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Petar Penkov <ppenkov@google.com>
Link: https://lore.kernel.org/bpf/20201005224528.389097-1-lrizzo@google.com
Say a user reuse map fd after creating a map manually and set the
pin_path, then load the object via libbpf.
In libbpf bpf_object__create_maps(), bpf_object__reuse_map() will
return 0 if there is no pinned map in map->pin_path. Then after
checking if map fd exist, we should also check if pin_path was set
and do bpf_map__pin() instead of continue the loop.
Fix it by creating map if fd not exist and continue checking pin_path
after that.
Suggested-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201006021345.3817033-3-liuhangbin@gmail.com
Currently BUILD_BUG() macro is expanded to smth like the following:
do {
extern void __compiletime_assert_0(void)
__attribute__((error("BUILD_BUG failed")));
if (!(!(1)))
__compiletime_assert_0();
} while (0);
If used in a function body this obviously would produce build errors
with -Wnested-externs and -Werror.
Build objtool with -Wno-nested-externs to enable BUILD_BUG() usage.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
The motivations to go rework memcpy_mcsafe() are that the benefit of
doing slow and careful copies is obviated on newer CPUs, and that the
current opt-in list of CPUs to instrument recovery is broken relative to
those CPUs. There is no need to keep an opt-in list up to date on an
ongoing basis if pmem/dax operations are instrumented for recovery by
default. With recovery enabled by default the old "mcsafe_key" opt-in to
careful copying can be made a "fragile" opt-out. Where the "fragile"
list takes steps to not consume poison across cachelines.
The discussion with Linus made clear that the current "_mcsafe" suffix
was imprecise to a fault. The operations that are needed by pmem/dax are
to copy from a source address that might throw #MC to a destination that
may write-fault, if it is a user page.
So copy_to_user_mcsafe() becomes copy_mc_to_user() to indicate
the separate precautions taken on source and destination.
copy_mc_to_kernel() is introduced as a non-SMAP version that does not
expect write-faults on the destination, but is still prepared to abort
with an error code upon taking #MC.
The original copy_mc_fragile() implementation had negative performance
implications since it did not use the fast-string instruction sequence
to perform copies. For this reason copy_mc_to_kernel() fell back to
plain memcpy() to preserve performance on platforms that did not indicate
the capability to recover from machine check exceptions. However, that
capability detection was not architectural and now that some platforms
can recover from fast-string consumption of memory errors the memcpy()
fallback now causes these more capable platforms to fail.
Introduce copy_mc_enhanced_fast_string() as the fast default
implementation of copy_mc_to_kernel() and finalize the transition of
copy_mc_fragile() to be a platform quirk to indicate 'copy-carefully'.
With this in place, copy_mc_to_kernel() is fast and recovery-ready by
default regardless of hardware capability.
Thanks to Vivek for identifying that copy_user_generic() is not suitable
as the copy_mc_to_user() backend since the #MC handler explicitly checks
ex_has_fault_handler(). Thanks to the 0day robot for catching a
performance bug in the x86/copy_mc_to_user implementation.
[ bp: Add the "why" for this change from the 0/2th message, massage. ]
Fixes: 92b0729c34 ("x86/mm, x86/mce: Add memcpy_mcsafe()")
Reported-by: Erwin Tsaur <erwin.tsaur@intel.com>
Reported-by: 0day robot <lkp@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Tested-by: Erwin Tsaur <erwin.tsaur@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/160195562556.2163339.18063423034951948973.stgit@dwillia2-desk3.amr.corp.intel.com
In reaction to a proposal to introduce a memcpy_mcsafe_fast()
implementation Linus points out that memcpy_mcsafe() is poorly named
relative to communicating the scope of the interface. Specifically what
addresses are valid to pass as source, destination, and what faults /
exceptions are handled.
Of particular concern is that even though x86 might be able to handle
the semantics of copy_mc_to_user() with its common copy_user_generic()
implementation other archs likely need / want an explicit path for this
case:
On Fri, May 1, 2020 at 11:28 AM Linus Torvalds <torvalds@linux-foundation.org> wrote:
>
> On Thu, Apr 30, 2020 at 6:21 PM Dan Williams <dan.j.williams@intel.com> wrote:
> >
> > However now I see that copy_user_generic() works for the wrong reason.
> > It works because the exception on the source address due to poison
> > looks no different than a write fault on the user address to the
> > caller, it's still just a short copy. So it makes copy_to_user() work
> > for the wrong reason relative to the name.
>
> Right.
>
> And it won't work that way on other architectures. On x86, we have a
> generic function that can take faults on either side, and we use it
> for both cases (and for the "in_user" case too), but that's an
> artifact of the architecture oddity.
>
> In fact, it's probably wrong even on x86 - because it can hide bugs -
> but writing those things is painful enough that everybody prefers
> having just one function.
Replace a single top-level memcpy_mcsafe() with either
copy_mc_to_user(), or copy_mc_to_kernel().
Introduce an x86 copy_mc_fragile() name as the rename for the
low-level x86 implementation formerly named memcpy_mcsafe(). It is used
as the slow / careful backend that is supplanted by a fast
copy_mc_generic() in a follow-on patch.
One side-effect of this reorganization is that separating copy_mc_64.S
to its own file means that perf no longer needs to track dependencies
for its memcpy_64.S benchmarks.
[ bp: Massage a bit. ]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: <stable@vger.kernel.org>
Link: http://lore.kernel.org/r/CAHk-=wjSqtXAqfUJxFtWNwmguFASTgB0dz1dT3V-78Quiezqbg@mail.gmail.com
Link: https://lkml.kernel.org/r/160195561680.2163339.11574962055305783722.stgit@dwillia2-desk3.amr.corp.intel.com
Rejecting non-native endian BTF overlapped with the addition
of support for it.
The rest were more simple overlapping changes, except the
renesas ravb binding update, which had to follow a file
move as well as a YAML conversion.
Signed-off-by: David S. Miller <davem@davemloft.net>
