Commit Graph

223 Commits

Author SHA1 Message Date
Lars-Peter Clausen
6374b19de6 ASoC: wm8962: Replace w->codec snd_soc_dapm_to_codec(w->dapm)
The codec field of the snd_soc_widget struct is eventually going to be
removed, use snd_soc_dapm_to_codec(w->dapm) instead.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-14 19:53:28 +00:00
Linus Torvalds
c0f486fde3 More ACPI and power management updates for 3.19-rc1
- Fix a regression in leds-gpio introduced by a recent commit that
    inadvertently changed the name of one of the properties used by
    the driver (Fabio Estevam).
 
  - Fix a regression in the ACPI backlight driver introduced by a
    recent fix that missed one special case that had to be taken
    into account (Aaron Lu).
 
  - Drop the level of some new kernel messages from the ACPI core
    introduced by a recent commit to KERN_DEBUG which they should
    have used from the start and drop some other unuseful KERN_ERR
    messages printed by ACPI (Rafael J Wysocki).
 
  - Revert an incorrect commit modifying the cpupower tool
    (Prarit Bhargava).
 
  - Fix two regressions introduced by recent commits in the OPP
    library and clean up some existing minor issues in that code
    (Viresh Kumar).
 
  - Continue to replace CONFIG_PM_RUNTIME with CONFIG_PM throughout
    the tree (or drop it where that can be done) in order to make
    it possible to eliminate CONFIG_PM_RUNTIME (Rafael J Wysocki,
    Ulf Hansson, Ludovic Desroches).  There will be one more
    "CONFIG_PM_RUNTIME removal" batch after this one, because some
    new uses of it have been introduced during the current merge
    window, but that should be sufficient to finally get rid of it.
 
  - Make the ACPI EC driver more robust against race conditions
    related to GPE handler installation failures (Lv Zheng).
 
  - Prevent the ACPI device PM core code from attempting to
    disable GPEs that it has not enabled which confuses ACPICA
    and makes it report errors unnecessarily (Rafael J Wysocki).
 
  - Add a "force" command line switch to the intel_pstate driver
    to make it possible to override the blacklisting of some
    systems in that driver if needed (Ethan Zhao).
 
  - Improve intel_pstate code documentation and add a MAINTAINERS
    entry for it (Kristen Carlson Accardi).
 
  - Make the ACPI fan driver create cooling device interfaces
    witn names that reflect the IDs of the ACPI device objects
    they are associated with, except for "generic" ACPI fans
    (PNP ID "PNP0C0B").  That's necessary for user space thermal
    management tools to be able to connect the fans with the
    parts of the system they are supposed to be cooling properly.
    From Srinivas Pandruvada.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJUk0IDAAoJEILEb/54YlRx7fgP/3+yF/0TnEW93j2ALDAQFiLF
 tSv2A2vQC8vtMJjjWx0z/HqPh86gfaReEFZmUJD/Q/e2LXEnxNZJ+QMjcekPVkDM
 mTvcIMc2MR8vOA/oMkgxeaKregrrx7RkCfojd+NWZhVukkjl+mvBHgAnYjXRL+NZ
 unDWGlbHG97vq/3kGjPYhDS00nxHblw8NHFBu5HL5RxwABdWoeZJITwqxXWyuPLw
 nlqNWlOxmwvtSbw2VMKz0uof1nFHyQLykYsMG0ZsyayCRdWUZYkEqmE7GGpCLkLu
 D6yfmlpen6ccIOsEAae0eXBt50IFY9Tihk5lovx1mZmci2SNRg29BqMI105wIn0u
 8b8Ej7MNHp7yMxRpB5WfU90p/y7ioJns9guFZxY0CKaRnrI2+BLt3RscMi3MPI06
 Cu2/WkSSa09fhDPA+pk+VDYsmWgyVawigesNmMP5/cvYO/yYywVRjOuO1k77qQGp
 4dSpFYEHfpxinejZnVZOk2V9MkvSLoSMux6wPV0xM0IE1iD0ulVpHjTJrwp80ph4
 +bfUFVr/vrD1y7EKbf1PD363ZKvJhWhvQWDgETsM1vgLf21PfWO7C2kflIAsWsdQ
 1ukD5nCBRlP4K73hG7bdM6kRztXhUdR0SHg85/t0KB/ExiVqtcXIzB60D0G1lENd
 QlKbq3O4lim1WGuhazQY
 =5fo2
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more ACPI and power management updates from Rafael Wysocki:
 "These are regression fixes (leds-gpio, ACPI backlight driver,
  operating performance points library, ACPI device enumeration
  messages, cpupower tool), other bug fixes (ACPI EC driver, ACPI device
  PM), some cleanups in the operating performance points (OPP)
  framework, continuation of CONFIG_PM_RUNTIME elimination, a couple of
  minor intel_pstate driver changes, a new MAINTAINERS entry for it and
  an ACPI fan driver change needed for better support of thermal
  management in user space.

  Specifics:

   - Fix a regression in leds-gpio introduced by a recent commit that
     inadvertently changed the name of one of the properties used by the
     driver (Fabio Estevam).

   - Fix a regression in the ACPI backlight driver introduced by a
     recent fix that missed one special case that had to be taken into
     account (Aaron Lu).

   - Drop the level of some new kernel messages from the ACPI core
     introduced by a recent commit to KERN_DEBUG which they should have
     used from the start and drop some other unuseful KERN_ERR messages
     printed by ACPI (Rafael J Wysocki).

   - Revert an incorrect commit modifying the cpupower tool (Prarit
     Bhargava).

   - Fix two regressions introduced by recent commits in the OPP library
     and clean up some existing minor issues in that code (Viresh
     Kumar).

   - Continue to replace CONFIG_PM_RUNTIME with CONFIG_PM throughout the
     tree (or drop it where that can be done) in order to make it
     possible to eliminate CONFIG_PM_RUNTIME (Rafael J Wysocki, Ulf
     Hansson, Ludovic Desroches).

     There will be one more "CONFIG_PM_RUNTIME removal" batch after this
     one, because some new uses of it have been introduced during the
     current merge window, but that should be sufficient to finally get
     rid of it.

   - Make the ACPI EC driver more robust against race conditions related
     to GPE handler installation failures (Lv Zheng).

   - Prevent the ACPI device PM core code from attempting to disable
     GPEs that it has not enabled which confuses ACPICA and makes it
     report errors unnecessarily (Rafael J Wysocki).

   - Add a "force" command line switch to the intel_pstate driver to
     make it possible to override the blacklisting of some systems in
     that driver if needed (Ethan Zhao).

   - Improve intel_pstate code documentation and add a MAINTAINERS entry
     for it (Kristen Carlson Accardi).

   - Make the ACPI fan driver create cooling device interfaces witn
     names that reflect the IDs of the ACPI device objects they are
     associated with, except for "generic" ACPI fans (PNP ID "PNP0C0B").

     That's necessary for user space thermal management tools to be able
     to connect the fans with the parts of the system they are supposed
     to be cooling properly.  From Srinivas Pandruvada"

* tag 'pm+acpi-3.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits)
  MAINTAINERS: add entry for intel_pstate
  ACPI / video: update the skip case for acpi_video_device_in_dod()
  power / PM: Eliminate CONFIG_PM_RUNTIME
  NFC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  SCSI / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  ACPI / EC: Fix unexpected ec_remove_handlers() invocations
  Revert "tools: cpupower: fix return checks for sysfs_get_idlestate_count()"
  tracing / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  x86 / PM: Replace CONFIG_PM_RUNTIME in io_apic.c
  PM: Remove the SET_PM_RUNTIME_PM_OPS() macro
  mmc: atmel-mci: use SET_RUNTIME_PM_OPS() macro
  PM / Kconfig: Replace PM_RUNTIME with PM in dependencies
  ARM / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  sound / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  phy / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  video / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  tty / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  spi: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  ACPI / PM: Do not disable wakeup GPEs that have not been enabled
  ACPI / utils: Drop error messages from acpi_evaluate_reference()
  ...
2014-12-18 20:28:33 -08:00
Rafael J. Wysocki
641d334b29 sound / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
After commit b2b49ccbdd (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is
selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks
depending on CONFIG_PM_RUNTIME may now be changed to depend on
CONFIG_PM.

Replace CONFIG_PM_RUNTIME with CONFIG_PM everywhere under sound/.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Acked-by: Brian Austin <brian.austin@cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
2014-12-13 00:42:18 +01:00
Mark Brown
67a3adab9d Merge remote-tracking branches 'asoc/topic/wm8955', 'asoc/topic/wm8960', 'asoc/topic/wm8961', 'asoc/topic/wm8962' and 'asoc/topic/wm8974' into asoc-next 2014-12-08 13:12:30 +00:00
Lars-Peter Clausen
3e4199ef01 ASoC: wm8962: Move DSP enable lock to the driver level
The wm8962 uses the snd_soc_codec mutex to protect the wm8962_dsp2_ena_put()
function from concurrent execution. This patch moves that lock to the driver
level. This will allow us to eventually remove the snd_soc_codec mutex.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-10 19:08:27 +00:00
Fabio Estevam
54ec2d5f3f ASoC: wm8962: Use the preferred form for passing a size of a struct
According to Documentation/CodingStyle - Chapter 14:

"The preferred form for passing a size of a struct is the following:

	p = kmalloc(sizeof(*p), ...);

The alternative form where struct name is spelled out hurts readability and
introduces an opportunity for a bug when the pointer variable type is changed
but the corresponding sizeof that is passed to a memory allocator is not."

So do it as recommeded.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-28 00:44:16 +00:00
abdoulaye berthe
88d5e520aa driver:gpio remove all usage of gpio_remove retval in driver
this remove all reference to gpio_remove retval in all driver
except pinctrl and gpio. the same thing is done for gpio and
pinctrl in two different patches.

Signed-off-by: Abdoulaye Berthe <berthe.ab@gmail.com>
Acked-by: Michael Büsch <m@bues.ch>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-18 11:03:10 -07:00
Mark Brown
e99a866c4c Merge remote-tracking branches 'asoc/topic/tlv320aic3x', 'asoc/topic/width', 'asoc/topic/wm0010', 'asoc/topic/wm8904' and 'asoc/topic/wm8962' into asoc-next 2014-08-04 16:32:18 +01:00
Nicolin Chen
d7821953cf ASoC: wm8962: Let CODEC driver enable and disable its own MCLK
snd_soc_open() will trigger pm_runtime resume() which will then enable
the regulator and initialization. So we should make sure the MCLK is
enabled before this resume().

Previously we let the machine driver get the clock and enable it in
its probe(). However, considering about power saving, it'll be better
to enable it when it's going to be used and disable it after using.

So this patch just simply adds clk_get() and clk_enable() to WM8962
driver. Meanwhile, it marks clock pointer to NULL if no clock assigned
to it so it will not break any current function.

Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-31 20:51:26 +01:00
Mark Brown
ec4dc01eb4 ASoC: wm8962: Convert to params_width()
The CODEC doesn't care how data is laid out in memory.

Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-07-31 18:47:59 +01:00
Mark Brown
0c5dacf2ca Merge remote-tracking branches 'asoc/topic/cs42l56', 'asoc/topic/cs42xx8' and 'asoc/topic/davinci' into asoc-next 2014-05-22 00:23:49 +01:00
Mark Brown
0f4019e6f4 Merge remote-tracking branch 'asoc/topic/component' into asoc-next 2014-05-22 00:23:41 +01:00
Charles Keepax
44330ab516 ASoC: wm8962: Update register CLASS_D_CONTROL_1 to be non-volatile
The register CLASS_D_CONTROL_1 is marked as volatile because it contains
a bit, DAC_MUTE, which is also mirrored in the ADC_DAC_CONTROL_1
register. This causes problems for the "Speaker Switch" control, which
will report an error if the CODEC is suspended because it relies on a
volatile register.

To resolve this issue mark CLASS_D_CONTROL_1 as non-volatile and
manually keep the register cache in sync by updating both bits when
changing the mute status.

Reported-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org
2014-05-13 19:02:30 +01:00
Brian Austin
c894e394d4 ASoC: Remove IS_ENABLED for INPUT in CS42L52 and WM8962
Now that INPUT is required for the CS42L52 and WM8962 we can remove the
IS_ENABLED(INPUT) check in the drivers.

Signed-off-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-02 09:41:09 -07:00
Lars-Peter Clausen
ea53bf77d1 ASoC: Add snd_soc_kcontrol_codec() helper function
For CODEC controls snd_kcontrol_chip() currently returns a pointer to the
CODEC that registered the control. With the upcoming consolidation of
platform and CODEC controls this will change. Prepare for this by introducing
the snd_soc_kcontrol_codec() helper function that will hide the implementation
details of how the CODEC for a control can be obtained. This will allow us to
change this easily in the future.

The patch also updates all CODEC drivers to use the new helper function.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-14 17:22:43 +01:00
Mark Brown
2620954d64 Merge remote-tracking branch 'asoc/topic/io' into asoc-next 2014-03-13 14:19:21 +00:00
Mark Brown
139f4b836b Merge remote-tracking branches 'asoc/topic/wm8961', 'asoc/topic/wm8962', 'asoc/topic/wm8974', 'asoc/topic/wm8983', 'asoc/topic/wm8988', 'asoc/topic/wm8990', 'asoc/topic/wm8991', 'asoc/topic/wm8993' and 'asoc/topic/wm8994' into asoc-next 2014-03-12 23:05:18 +00:00
Xiubo Li
5d6be5aa6b ASoC: codec: Simplify ASoC probe code.
For some CODEC drivers like who act as the MFDs children are ignored
by this patch.

Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-11 09:59:05 +00:00
Lars-Peter Clausen
d7f31d3c89 ASoC: wm8962: Replace codec->control_data with wm8962->regmap
With the ongoing component-ization of the ASoC framework and the continuing
migration to using regmap for IO the control_data field of the snd_soc_codec
struct will eventually be removed. Prepare the wm8962 driver for this by using
wm8962->regmap instead of accessing the CODEC's control_data field.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-25 13:35:48 +09:00
Takashi Iwai
da6ebf83bb ASoC: wm8962: Use SOC_ENUM_SINGLE_DECL()
Just replace with the helper macro.  No functional change at all.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-23 11:40:11 +09:00
Charles Keepax
f1a3b8d9d4 ASoC: wm8962: Update locking around use of DAPM pin API
The pin updates in this driver look like they are intended to be done
atomically, update to do so.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-20 19:22:56 +09:00
Mark Brown
9d7433b064 ASoC: wm8962: Reinitialise the IRQ completion rather than just trying it
This is better practice.

Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-02-03 12:51:00 +00:00
Mark Brown
d6f95e5407 ASoC: wm8962: Clean up error handling for failed FLL start
Don't record the FLL as having started and leave the hardware disabled
ensuring we are in a better state if this does happen to be a transient
error and making debugging easier.

Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-02-03 12:50:59 +00:00
Mark Brown
df6ab65f2f ASoC: wm8962: Check if we runtime resume the device when starting FLL
Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-02-03 12:50:59 +00:00
Mark Brown
7e9614ebcf ASoC: wm8962: Hold a runtime PM reference while handling interrupts
If the device is runtime suspended then we can't interact with it as it
may have been powered off and the register map will be in cache only
mode.

Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-02-03 12:50:59 +00:00
Mark Brown
2cde51fbd0 Merge remote-tracking branches 'asoc/topic/ad1836', 'asoc/topic/ad193x', 'asoc/topic/adav80x', 'asoc/topic/adsp', 'asoc/topic/ak4641', 'asoc/topic/ak4642', 'asoc/topic/arizona', 'asoc/topic/atmel', 'asoc/topic/au1x', 'asoc/topic/axi', 'asoc/topic/bcm2835', 'asoc/topic/blackfin', 'asoc/topic/cs4271', 'asoc/topic/cs42l52', 'asoc/topic/da7210', 'asoc/topic/davinci', 'asoc/topic/ep93xx', 'asoc/topic/fsl', 'asoc/topic/fsl-mxs', 'asoc/topic/generic', 'asoc/topic/hdmi', 'asoc/topic/jack', 'asoc/topic/jz4740', 'asoc/topic/max98090', 'asoc/topic/mxs', 'asoc/topic/omap', 'asoc/topic/pxa', 'asoc/topic/rcar', 'asoc/topic/s6000', 'asoc/topic/sai', 'asoc/topic/samsung', 'asoc/topic/sgtl5000', 'asoc/topic/spear', 'asoc/topic/ssm2518', 'asoc/topic/ssm2602', 'asoc/topic/tegra', 'asoc/topic/tlv320aic3x', 'asoc/topic/twl6040', 'asoc/topic/txx9', 'asoc/topic/uda1380', 'asoc/topic/width', 'asoc/topic/wm8510', 'asoc/topic/wm8523', 'asoc/topic/wm8580', 'asoc/topic/wm8711', 'asoc/topic/wm8728', 'asoc/topic/wm8731', 'asoc/topic/wm8741', 'asoc/topic/wm8750', 'asoc/topic/wm8753', 'asoc/topic/wm8776', 'asoc/topic/wm8804', 'asoc/topic/wm8900', 'asoc/topic/wm8901', 'asoc/topic/wm8940', 'asoc/topic/wm8962', 'asoc/topic/wm8974', 'asoc/topic/wm8985', 'asoc/topic/wm8988', 'asoc/topic/wm8990', 'asoc/topic/wm8991', 'asoc/topic/wm8994', 'asoc/topic/wm8995', 'asoc/topic/wm9081' and 'asoc/topic/x86' into asoc-next 2014-01-02 13:01:55 +00:00
Nicolin Chen
75704ecfbb ASoC: wm8962: Enable SYSCLK provisonally before fetching generated DSPCLK_DIV
DSPCLK_DIV can be only generated correctly after enabling SYSCLK. But if the
current bias_level hasn't reached SND_SOC_BIAS_ON, DAPM won't enable SYSCLK,
which would cause the calculation result from DSPCLK_DIV invalid since bit
DSPCLK_DIV will be finally turned to its true value after DAPM enables SYSCLK
while the driver won't calculate it again for the current instance. In this
circumstance, a playback which needs non-zero DSPCLK_DIV would be distorted
due to unexpected clock frequency resulted from an invalid DSPCLK_DIV value.

So this patch provisionally enables the SYSCLK to get a valid DSPCLK_DIV for
calculation and then disables it afterward.

Signed-off-by: Nicolin Chen <b42378@freescale.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-05 14:59:41 +00:00
Fabio Estevam
c3e8494c00 ASoC: wm8962: Use IS_ENABLED() macro
Using the IS_ENABLED() macro can make the code shorter and simpler.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-24 13:51:52 +00:00
Takashi Iwai
abfe69dd2e ASoC: Fixes for v3.13
A few fixes in drivers, the i.MX and wm8962 fixes are for a pretty nasty
 issues for users of those drivers if they run into them.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.15 (GNU/Linux)
 
 iQIcBAABAgAGBQJShz3GAAoJELSic+t+oim9HgUP/1LSw7wXaGkzBxd7sQ4bAwLc
 Y8sRASb7fJywELUhaE5YTCTcvx6a5xsrhV1MDx5c9NRMWfxnoreuJX6N4fmMk3Tl
 1hk+IQW0iDA2Na12akxAb1t3sXiSROeqLTeZsMrua75MVW1vTIDiNmUoMqOGxczu
 2uzMCYPOJYNLawFAue28prGomLSpI2zXktQyGUiCzX6zh/JKu/I+2UuOl6N1CI3q
 mbNyR4JQDTiodZpg0Fur6I+2pArqaJPY9OthBI9f1xj1ifJDpQMQQChjRQNKYWeK
 A/TMTYMkrIeZUHnNkluem+JuRIE9HED/fY/Uu0MclvfpqqOKWPBMwoIFwPa+8xnn
 n6c8XnFzpZa4p/0h6JE9SBYvliyit44LSmCfZ/q5u2z9JJXeAPXvJfNErTIHDTa1
 S+Xx11oJ0jrThPTNuwhTfc79odPzGigVFk8GoHE2atZr1+FxQ46XDD3k0Hc8g62o
 f86ipMRHUSQdGMeHteKhFbfQUp2b9Y9oQLliovcA+zmWDrQ1E4jG51pfc4feYzR9
 BHqV2FsPa8KIPObZaf+rFXtoBJlAjk423nFSmH+Pt3PBkDmJWTOUG3O5p4nn7oL1
 /HThe+EjuCFuKZ8U75pOnQEdKPTiz4noDRMiYs51Q5OVtywpQ6uRa5r88Fsetpyp
 Kg4lGPkH4zaCEvHp4/cz
 =qcIh
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v3.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v3.13

A few fixes in drivers, the i.MX and wm8962 fixes are for a pretty nasty
issues for users of those drivers if they run into them.
2013-11-16 11:45:55 +01:00
Mark Brown
a190f7867e Merge remote-tracking branch 'asoc/fix/wm8962' into asoc-linus 2013-11-15 10:20:16 +00:00
Nicolin Chen
50bfcf2df2 ASoC: wm8962: Turn on regcache_cache_only before disabling regulator
It's safer to turn on regcache_cache_only before disabling regulator since
the driver will turn off the regcache_cache_only after enabling regulator.

If we remain cache_only false, some command like 'amixer cset' would get
failure if being run before wm8962_resume().

Signed-off-by: Nicolin Chen <b42378@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org
2013-11-14 17:04:21 +00:00
Mark Brown
22b468a06e Merge remote-tracking branch 'asoc/topic/wm8962' into asoc-next 2013-11-08 10:43:42 +00:00
Takashi Iwai
69134367c3 ASoC: wm8962: Replace BUG() with WARN()
BUG() used in the driver is just to spit the stack trace on buggy
points, not really needed to stop the whole operation.  For that
purpose, it'd be more convenient to use WARN() instead with more
error information.

Cc: patches@opensource.wolfsonmicro.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-07 19:55:20 +00:00
Richard Fitzgerald
ae2ff9f6c5 ASoC: wm8962: Add EQ coefficient support
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-01 10:52:17 -07:00
Richard Fitzgerald
dea0c74ff9 ASoC: wm8962: Add ALC coefficient support
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-01 10:52:16 -07:00
Nicolin Chen
b5ef3f2a80 ASoC: wm8962: Fix null pointer pdata access in I2C probe()
When using DT binding to pass private data, there would be Kernel panic
occuring due to NULL pointer access in wm8962_i2c_probe(). Thus fix it.

Signed-off-by: Nicolin Chen <b42378@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-29 09:33:51 -07:00
Mark Brown
78b78f5c01 ASoC: wm8962: Move register initialisation to I2C probe()
This is more idiomatic and is required for robust operation since we must
ensure that the clocking configuration is valid as rapidly as possible.

Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-18 11:33:55 +01:00
Mark Brown
ca50410b73 ASoC: wm8962: Move interrupt initalisation to probe()
This is more idiomatic and fixes bugs in the error handling paths.

Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-18 11:33:54 +01:00
Takashi Iwai
68538bf2bc ASoC: Updates for v3.12
- DAPM is now mandatory for CODEC drivers in order to avoid the repeated
   regressions in the special cases for non-DAPM CODECs and make it
   easier to integrate with other components on boards.  All existing
   drivers have had some level of DAPM support added.
 - A lot of cleanups in DAPM plus support for maintaining controls in a
   specific state while a DAPM widget all contributed by Lars-Peter Clausen.
 - Core helpers for bitbanged AC'97 reset from Markus Pargmann.
 - New drivers and support for Analog Devices ADAU1702 and ADAU1401(a),
   Asahi Kasei Microdevices AK4554, Atmel AT91ASM9x5 and WM8904 based
   machines, Freescale S/PDIF and SSI AC'97, Renesas R-Car SoCs, Samsung
   Exynos5420 SoCs, Texas Instruments PCM1681 and PCM1792A and Wolfson
   Microelectronics WM8997.
 - Support for building drivers that can support it cross-platform for
   compile test.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJSF0rqAAoJELSic+t+oim9YK0P/0CwP7lAjL87EF+dUKW51raB
 7K8xtOgObec1+Fnc1FEbN6us1hXRkjZJMJyRqa3DO5EaNM5TUoxUa/+MNsKmyGXs
 UhoW7J2TUizxgStxszXdxLEZG5oErxwCtJR3xlIkAq4kcnUI0LwRtGctmguZH74a
 UFxd34tcq8LxytvBp1HaNgaG1OQqIqYUNHYXKCwZZMJRxk8TQU9NfAzlCOtWfPWp
 jjdsBkX6bypWzSV/0P8rdSvjhHlJ1vBw3XTD9jD1/EuC5J7qqKQvwo5Oid98QHiv
 /guV0zx6EPdW5IgyGVvlyc4e5zLrtrckj05Kjyy426mZUpLmGoQCPj+ZAZA+jdqo
 qX3M9lXdisx4FI1Ke+y00G64q9fOuNEyjHKnoMPbZXC7zBTLPC8znncM6Xk5MOx/
 Y+fSChecYzkCrBJqHZGUcMdl0/xL1cRrH6BP2I5ISn5ruEjmTuj3dD0JTUVRi1HM
 KGrLP6TnuY+yBMhoqbGsH7YtNN5NDbqnJrUXQy82GGHH++LlHs/0ljDdOCuwX774
 qu1PsyTwrBvCU9erJS4yTG1KIiFFLTn+exPvUOyjaTFVbs8PoX2NOC4/Ihqj+dvU
 UDj/Lh+/zF2BzrkxN65BwuXULElxjtoFvleWLzt7V8qOCb5LOzBVW8a7f5HQzfU6
 LsEXDtB4VkjGjOGAAsII
 =qzif
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Updates for v3.12

- DAPM is now mandatory for CODEC drivers in order to avoid the repeated
  regressions in the special cases for non-DAPM CODECs and make it
  easier to integrate with other components on boards.  All existing
  drivers have had some level of DAPM support added.
- A lot of cleanups in DAPM plus support for maintaining controls in a
  specific state while a DAPM widget all contributed by Lars-Peter Clausen.
- Core helpers for bitbanged AC'97 reset from Markus Pargmann.
- New drivers and support for Analog Devices ADAU1702 and ADAU1401(a),
  Asahi Kasei Microdevices AK4554, Atmel AT91ASM9x5 and WM8904 based
  machines, Freescale S/PDIF and SSI AC'97, Renesas R-Car SoCs, Samsung
  Exynos5420 SoCs, Texas Instruments PCM1681 and PCM1792A and Wolfson
  Microelectronics WM8997.
- Support for building drivers that can support it cross-platform for
  compile test.
2013-08-23 14:12:22 +02:00
Mark Brown
da72c9619f ASoC: wm8962: Use power efficient workqueue
The accessory detect debounce work is not performance sensitive so let
the scheduler run it wherever is most efficient rather than in a per CPU
workqueue by using the system power efficient workqueue.

Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2013-07-22 11:10:24 +01:00
Jingoo Han
b785a492c6 ALSA: replace strict_strto*() with kstrto*()
The usage of strict_strto*() is not preferred, because
strict_strto*() is obsolete. Thus, kstrto*() should be
used.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-21 11:56:18 +02:00
Fabio Estevam
444fc4b369 ASoC: wm8962: Do not call configure_bclk() inside wm8962_set_dai_sysclk()
Currently after playing any audio file, we get the following error message:

$ aplay clarinet.wav
Playing WAVE 'clarinet.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
$ wm8962 0-001a: Unsupported sysclk ratio 544

This error message appears about 5 seconds after the audio playback has
finished.

Quoting Mark Brown [1]:

"The issue here is triggered by the machine
switching from the FLL to direct MCLK usage where the MCLK isn't
generating a useful ratio.

I suspect we should just kill the configure_bclk() in set_sysclk(), that
one isn't safe as we can't reconfigure a live SYSCLK and it's probably
the one that generates your warnings."

Confirmed that the "Unsupported sysclk ratio" error message comes from
wm8962_set_dai_sysclk(), so get rid of wm8962_configure_bclk() inside this
function.

[1] http://mailman.alsa-project.org/pipermail/alsa-devel/2013-July/064241.html

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-19 18:45:02 +01:00
Shawn Guo
4642aabd21 ASoC: wm8962: fix NULL pdata pointer
There is an error in merge commit 384b834 on conflict resolution which
causes the following NULL pdata pointer bug.

wm8962 0-001a: customer id 0 revision D
Unable to handle kernel NULL pointer dereference at virtual address 00000004
pgd = 80004000
[00000004] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.0+ #1
task: bf870000 ti: bf874000 task.ti: bf874000
PC is at wm8962_probe+0x134/0x6c8
LR is at regmap_unlock_mutex+0x10/0x14
pc : [<80452100>]    lr : [<80304cf4>]    psr: a0000113
sp : bf875c98  ip : 00000000  fp : bf875cd4
r10: 00000000  r9 : bfb1830c  r8 : 80779bc4
r7 : 00000000  r6 : 00000001  r5 : bfbac010  r4 : bfb33e00
r3 : 80304ce4  r2 : 00000000  r1 : 00000001  r0 : fffffffb
Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
Control: 10c53c7d  Table: 1000404a  DAC: 00000017
Process swapper/0 (pid: 1, stack limit = 0xbf874238)
Stack: (0xbf875c98 to 0xbf876000)
...

Fix the error by assigning pdata a correct pointer.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-04 16:49:51 +01:00
Mark Brown
f57019aa0a Merge remote-tracking branch 'asoc/topic/wm8962' into asoc-next 2013-06-17 17:20:32 +01:00
Nicolin Chen
f5055f9373 ASoC: wm8962: Enable start-up and normal bias after reset in runtime resume
This part of bias settings are essential for WM8962 to power up. Without it
"wm8962 0-001a: DC servo timed out" might be prompted due to power-up failure
that happens to FLL if being used.

The driver's also bringing the bias down in the suspend path so it needs to be
powered up in the resume path for symmetry.

According to dapm_pre_sequence_async(), DAPM would call pm_runtime_get_sync()
to let driver finish the bias settings in pm_runtime_resume() before the bias
level being set to STANDBY. So no need to worry about disordered settings for
VMID of WM8962.

Signed-off-by: Nicolin Chen <b42378@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-14 12:43:16 +01:00
Mark Brown
384b834558 Merge branch 'fix/wm8962' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-wm8962
Conflicts:
	sound/soc/codecs/wm8962.c
2013-06-14 10:16:06 +01:00
Nicolin Chen
2e7ee15ced ASoC: wm8962: Remove remaining direct register cache accesses
Also fix return values for headphone switch updates.

Signed-off-by: Nicolin Chen <b42378@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org
2013-06-14 10:13:53 +01:00
Mark Brown
9c24b16722 ASoC: wm8962: Restore device state after reset in runtime resume
After the device has been reset we need to repeat the same
initialisation we do on probe to make sure that the device is in
a known state.

Tested-by: Nicolin Chen <b42378@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-10 13:50:44 +01:00
Nicolin Chen
d74e9e7090 ASoC: wm8962: Add device tree binding
Document the device tree binding for the WM8962 codec, and modify the
driver to extract platform data from the device tree, if present.

Based on work of WM8903 by Stephen Warren <swarren@nvidia.com>

Signed-off-by: Nicolin Chen <b42378@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-07 10:35:17 +01:00
Nicolin Chen
e75a52c672 ASoC: WM8962: Create default platform data structure
Embed a copy of struct wm8962_pdata in stuct wm8962_priv
so that there's no need to check validity of pdata any more.

Signed-off-by: Nicolin Chen <b42378@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-06 14:26:29 +01:00
Mark Brown
346f1d4083 ASoC: wm8962: Unconditionally wait for the FLL to lock
If the FLL is being shut down we will exit early so there is no need to
check here and in fact we're checking the wrong thing anyway.

Reported-by: Graeme Gregory <gg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-24 15:38:10 +00:00
Mark Brown
a2ce64750e ASoC: wm8962: Convert to devm_input_allocate_device()
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-24 15:38:02 +00:00
Fabio Estevam
5ce568329e ASoC: wm8962: Add device tree support
Add device tree support.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-24 15:36:57 +00:00
Bill Pemberton
7a79e94e97 ASoC: codecs: remove __dev* attributes
CONFIG_HOTPLUG is going away as an option.  As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-10 00:31:51 +09:00
Sachin Kamat
b439c6d0d1 ASoC: wm8962: Use devm_regmap_init_i2c()
devm_regmap_init_i2c() is device managed and makes error
handling and code cleanup simpler.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-02 13:06:44 +09:00
Sachin Kamat
92437cbb1b ASoC: wm8962: Use devm_regulator_bulk_get
devm_regulator_bulk_get() is device managed and makes error
handling and code cleanup simpler.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-28 17:39:13 +00:00
Mark Brown
52c0eee332 ASoC: wm8962: Don't duplicate bias level management in resume
The core will bring the bias level up for us since we use idle_bias_off,
duplicating this may be harmful.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-09 14:11:10 +01:00
Mark Brown
9d40e5582c ASoC: wm8962: Allow VMID time to fully ramp
Required for reliable power up from cold.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org
2012-07-31 19:30:24 +01:00
Mark Brown
e4dd76788c ASoC: wm8962: Redo early init of the part on resume
Ensure robust startup of the part by going through the reset procedure
prior to resyncing the full register cache, avoiding potential intermittent
faults in some designs.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org
2012-07-12 18:41:02 +01:00
Mark Brown
081413f206 ASoC: wm8962: Log AIF configuration requested by hw_params()
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-03 20:10:51 +01:00
Mark Brown
656baaebf9 ASoC: codecs: Refresh copyrights for Wolfson drivers
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03 13:06:37 +01:00
Mark Brown
e6968a1719 ASoC: codecs: Remove rtd->codec usage from CODEC drivers
In order to support CODEC<->CODEC links remove the assumption that there
is only a single CODEC on a DAI link by removing the use of the CODEC
pointer in the rtd from the CODEC drivers. They are already being passed
their DAI whenever they are passed an rtd and can get the CODEC from
there.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-04 15:59:12 +01:00
Mark Brown
93a86bea26 ASoC: wm8962: Add HPF coefficient configuration support
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01 11:28:25 +01:00
Mark Brown
5462fccde5 ASoC: wm8962: Add HD Bass and VSS coefficient configuration
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01 11:28:25 +01:00
Mark Brown
fd0ca45bef ASoC: wm8962: Add Dynamic Range Control support
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01 11:28:24 +01:00
Mark Brown
acf31d4392 ASoC: wm8962: Add Direct-Form 1 filter support
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01 11:28:24 +01:00
Mark Brown
69e5a39f39 ASoC: wm8962: Add 3D enhancement support
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01 11:28:24 +01:00
Mark Brown
26b427a701 ASoC: wm8962: Implement DSP2 configuration initialisation
We can simply use the register cache code to synchronise the current
configuration down to the device when bringing up the DSP.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01 11:28:24 +01:00
Takashi Iwai
cb3f2adc03 Merge branch 'topic/asoc' into for-linus 2012-03-18 18:22:37 +01:00
Mark Brown
ba106ce3d0 ASoC: wm8962: Remove defaults for volatile registers
Save a little RAM.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-06 00:26:05 +00:00
Mark Brown
fbe4ff795f ASoC: wm8962: Remove unneeded pm_runtime_set_active()
The default pm_runtime status is enabled which is what we want.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-06 00:18:42 +00:00
Mark Brown
1355ab147f ASoC: wm8962: Run the headphone in class G mode when sidetone is enabled
Class W mode with sidetone is not fully supported.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-02 12:01:40 +00:00
Mark Brown
df0c016d0b ASoC: wm8962: Remove register default for PLL2
The initial value can be changed depending on system configuration.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-01 12:41:55 +00:00
Mark Brown
0512615db6 ASoC: wm8962: Convert interrupt handler to direct regmap usage
Avoids potential locking issues with anything that needs the CODEC lock.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-23 22:06:58 +00:00
Mark Brown
d690516c6d ASoC: wm8962: Remove mistakenly committed debug logging
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-23 15:46:25 +00:00
Mark Brown
9d50a764b5 ASoC: wm8962: Convert to module_i2c_driver()
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-17 08:15:36 -08:00
Mark Brown
d23031a4d3 ASoC: wm8962: Convert to runtime PM for bias off management
This allows userspace control of final power off, allowing policy decisions
for register configuration retention.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-16 22:32:04 -08:00
Mark Brown
a968d9db3b ASoC: wm8962: Don't automatically enable and disable FLL
Only enable and disable the FLL when explicitly told to, supporting some
additional use cases and making the driver behaviour more standard.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-16 22:32:03 -08:00
Mark Brown
5aa9b858ef ASoC: wm8962: Clean up register dump cruft
No longer needed with regmap.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-16 22:32:02 -08:00
Mark Brown
07fabd1bfb ASoC: wm8962: Add new SYSCLK ratios for new device revisions
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-16 22:32:02 -08:00
Mark Brown
eeba1f8b6a ASoC: wm8962: Log the selected SYSCLK ratio
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-16 22:32:01 -08:00
Mark Brown
1993502d24 ASoC: wm8962: Only configure BCLK in hw_params when audio is active
Otherwise we might not have a sensible clocking setup ready.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-16 22:32:00 -08:00
Mark Brown
71de4d27c8 ASoC: wm8962: Update the clocking when setting system clock
Make sure we update for any changes in cases where we reconfigure while
live (eg, for analogue bypass).

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-16 22:31:59 -08:00
Axel Lin
905b41956c ASoC: Show device id in the debug message
Show the id we read when the id mismatch is detected.
This is useful for debugging.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-15 22:19:55 -08:00
Mark Brown
31794bc37b ASoC: wm8962: Fix sidetone enumeration texts
The sidetone enumeration texts have left and right swapped.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org
2012-02-14 13:54:45 -08:00
Mark Brown
a08a499aa3 Linux 3.3-rc3
.. the number of the half-beast?
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQEcBAABAgAGBQJPMzv8AAoJEHm+PkMAQRiGgeYIAJxxGCxSMLRIiPaGRmQbWifs
 eE3z6AUWitGfYvhmYdWVz+C/aa4pPCVWr3bAFxUQhu+ESmiFIiqiefvlTRf5f84e
 pcoJFobkFfhtK4gLvUr75WxXDFq/1HhKqW1OLzIW4gQsnhMdjGJ3lLK6ZoRYH8h4
 cGoN3DRII9mVLFcB2sgbeRvbQBA/O4n0aOQ2ryZkCcPQQMIKhR/rUEEV2pe/ovHE
 rumQgI3PVey816P4e5YnOvrEAllFZlaZ/F0ClJgNdfeQCVTZx9KNRbiNxHi6fcC5
 6Zgg7e5EvQTAy7QqQZ0hmS4k4CFmnswX3Nm+ZabRNqBdLSjPEDD9hk1o1dodYCg=
 =BBLC
 -----END PGP SIGNATURE-----

Merge tag 'v3.3-rc3' as we've got several bugfixes in there which are
colliding annoyingly with development.

Linux 3.3-rc3

.. the number of the half-beast?

Conflicts:
	sound/soc/codecs/wm5100.c
	sound/soc/codecs/wm8994.c
2012-02-09 12:00:22 +00:00
Mark Brown
4c6c0b5eee ASoC: wm8962: Support mono playback and record
Make sure we generate enough BCLKs for I2S style modes by always having
a minimum of two channels worth of clocks for the BCLK.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-08 19:49:54 +00:00
Liam Girdwood
022658beab ASoC: core: Add support for DAI and machine kcontrols.
Currently ASoC can only add kcontrols using codec and platform component device
handles. It's also desirable to add kcontrols for DAIs (i.e. McBSP) and for
SoC card machine drivers too. This allows the kcontrol to have a direct handle to
the parent ASoC component DAI/SoC Card/Platform/Codec device and hence easily
get it's private data.

This change makes snd_soc_add_controls() static and wraps it in the folowing
calls (card and dai are new) :-

snd_soc_add_card_controls()
snd_soc_add_codec_controls()
snd_soc_add_dai_controls()
snd_soc_add_platform_controls()

This patch also does a lot of small mechanical changes in individual codec drivers
to replace snd_soc_add_controls() with snd_soc_add_codec_controls().

It also updates the McBSP DAI driver to use snd_soc_add_dai_controls().

Finally, it updates the existing machine drivers that register controls to either :-

1) Use snd_soc_add_card_controls() where no direct codec control is required.
2) Use snd_soc_add_codec_controls() where there is direct codec control.

In the case of 1) above we also update the machine drivers to get the correct
component data pointers from the kcontrol (rather than getting the machine pointer
via the codec pointer).

Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-04 12:40:11 +00:00
Susan Gao
2b6712b195 ASoC: wm8962: Fix word length configuration
Signed-off-by: Susan Gao <sgao@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org
2012-02-01 10:07:20 +00:00
Mark Brown
2693efd660 ASoC: wm8962: Enable idle_bias_off
The WM8962 has ground referenced and class D outputs so can happily go
down to BIAS_OFF without a large startup time.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-27 20:18:55 +00:00
Mark Brown
5539a10288 ASoC: wm8962: Mark register cache as dirty when regulators are disabled
Otherwise we won't resync later.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-25 21:17:29 +00:00
Mark Brown
182c51ce79 ASoC: wm8962: Optimise power consumption for IN4 DC measurement usage
When the hardware is configured with one or both of the IN4 inputs used
for DC measurement (with no DC blocking capacitor connected) then we can
improve power consumption slightly in idle modes by applying a register
write sequence. Provide platform data to enable this, implemented using
a regmap patch.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-24 21:19:45 +00:00
Mark Brown
5f52ee4875 ASoC: Add WM8962 DAC and ADC L/R swap support
Simple switches since there's no per-channel control.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20 13:58:29 +00:00
Mark Brown
cef6d1d450 ASoC: Convert WM8962 register access map to modern style
Much more compact, both in terms of source and especially in terms of
RAM used at runtime.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20 13:58:28 +00:00
Mark Brown
291d64be31 ASoC: Make WM8962 I2C usage unconditional
We only support I2C so no need to ifdef.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20 13:58:27 +00:00
Axel Lin
fe75fe0e04 ASoC: Fix return value of wm8962_gpio_direction_out()
We can't just pass back the return value of snd_soc_update_bits() as it
will be 1 if a bit changed rather than zero.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-02 13:08:34 +00:00
Mark Brown
1b39bf3468 ASoC: Enable ASoC register map dump for some regmap CODECs
It's still useful to be able to poke around in the register map at
runtime.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-30 01:59:39 +00:00
Mark Brown
36c6b54cb0 ASoC: Make WM8962 beep a signal generator
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2011-12-02 10:27:01 +00:00
Mark Brown
be086aa8ca ASoC: Convert WM8962 to devm_kzalloc()
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-27 22:02:44 +00:00
Mark Brown
997c2ea916 ASoC: Remove unneeded platform_device.h inclusions from CODECs
They've not been needed for a long time if they were ever required.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-27 12:24:48 +00:00