There's a race condition in the netdev registration in that
NETDEV_REGISTER actually happens after the netdev is available,
and so if we initialize things only there, we might get called
with an uninitialized wdev through nl80211 - not using a wdev
but using a netdev interface index.
I found this while looking into a syzbot report, but it doesn't
really seem to be related, and unfortunately there's no repro
for it (yet). I can't (yet) explain how it managed to get into
cfg80211_release_pmsr() from nl80211_netlink_notify() without
the wdev having been initialized, as the latter only iterates
the wdevs that are linked into the rdev, which even without the
change here happened after init.
However, looking at this, it seems fairly clear that the init
needs to be done earlier, otherwise we might even re-init on a
netns move, when data might still be pending.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20201009135821.fdcbba3aad65.Ie9201d91dbcb7da32318812effdc1561aeaf4cdc@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When ieee80211_skb_resize() is called from ieee80211_build_hdr()
the skb has no 802.11 header yet, in fact it consist only of the
payload as the ethernet frame is removed. As such, we're using
the payload data for ieee80211_is_mgmt(), which is of course
completely wrong. This didn't really hurt us because these are
always data frames, so we could only have added more tailroom
than we needed if we determined it was a management frame and
sdata->crypto_tx_tailroom_needed_cnt was false.
However, syzbot found that of course there need not be any payload,
so we're using at best uninitialized memory for the check.
Fix this to pass explicitly the kind of frame that we have instead
of checking there, by replacing the "bool may_encrypt" argument
with an argument that can carry the three possible states - it's
not going to be encrypted, it's a management frame, or it's a data
frame (and then we check sdata->crypto_tx_tailroom_needed_cnt).
Reported-by: syzbot+32fd1a1bfe355e93f1e2@syzkaller.appspotmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20201009132538.e1fd7f802947.I799b288466ea2815f9d4c84349fae697dca2f189@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When sending EAPOL frames via NL80211 they are treated as injected
frames in mac80211. Due to commit 1df2bdba52 ("mac80211: never drop
injected frames even if normally not allowed") these injected frames
were not assigned a sta context in the function ieee80211_tx_dequeue,
causing certain wireless network cards to always send EAPOL frames in
plaintext. This may cause compatibility issues with some clients or
APs, which for instance can cause the group key handshake to fail and
in turn would cause the station to get disconnected.
This commit fixes this regression by assigning a sta context in
ieee80211_tx_dequeue to injected frames as well.
Note that sending EAPOL frames in plaintext is not a security issue
since they contain their own encryption and authentication protection.
Cc: stable@vger.kernel.org
Fixes: 1df2bdba52 ("mac80211: never drop injected frames even if normally not allowed")
Reported-by: Thomas Deutschmann <whissi@gentoo.org>
Tested-by: Christian Hesse <list@eworm.de>
Tested-by: Thomas Deutschmann <whissi@gentoo.org>
Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
Link: https://lore.kernel.org/r/20201019160113.350912-1-Mathy.Vanhoef@kuleuven.be
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is the implementation of Netlink notifications out of CFM.
Notifications are initiated whenever a state change happens in CFM.
IFLA_BRIDGE_CFM:
Points to the CFM information.
IFLA_BRIDGE_CFM_MEP_STATUS_INFO:
This indicate that the MEP instance status are following.
IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO:
This indicate that the peer MEP status are following.
CFM nested attribute has the following attributes in next level.
IFLA_BRIDGE_CFM_MEP_STATUS_INSTANCE:
The MEP instance number of the delivered status.
The type is NLA_U32.
IFLA_BRIDGE_CFM_MEP_STATUS_OPCODE_UNEXP_SEEN:
The MEP instance received CFM PDU with unexpected Opcode.
The type is NLA_U32 (bool).
IFLA_BRIDGE_CFM_MEP_STATUS_VERSION_UNEXP_SEEN:
The MEP instance received CFM PDU with unexpected version.
The type is NLA_U32 (bool).
IFLA_BRIDGE_CFM_MEP_STATUS_RX_LEVEL_LOW_SEEN:
The MEP instance received CCM PDU with MD level lower than
configured level. This frame is discarded.
The type is NLA_U32 (bool).
IFLA_BRIDGE_CFM_CC_PEER_STATUS_INSTANCE:
The MEP instance number of the delivered status.
The type is NLA_U32.
IFLA_BRIDGE_CFM_CC_PEER_STATUS_PEER_MEPID:
The added Peer MEP ID of the delivered status.
The type is NLA_U32.
IFLA_BRIDGE_CFM_CC_PEER_STATUS_CCM_DEFECT:
The CCM defect status.
The type is NLA_U32 (bool).
True means no CCM frame is received for 3.25 intervals.
IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL.
IFLA_BRIDGE_CFM_CC_PEER_STATUS_RDI:
The last received CCM PDU RDI.
The type is NLA_U32 (bool).
IFLA_BRIDGE_CFM_CC_PEER_STATUS_PORT_TLV_VALUE:
The last received CCM PDU Port Status TLV value field.
The type is NLA_U8.
IFLA_BRIDGE_CFM_CC_PEER_STATUS_IF_TLV_VALUE:
The last received CCM PDU Interface Status TLV value field.
The type is NLA_U8.
IFLA_BRIDGE_CFM_CC_PEER_STATUS_SEEN:
A CCM frame has been received from Peer MEP.
The type is NLA_U32 (bool).
This is cleared after GETLINK IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO.
IFLA_BRIDGE_CFM_CC_PEER_STATUS_TLV_SEEN:
A CCM frame with TLV has been received from Peer MEP.
The type is NLA_U32 (bool).
This is cleared after GETLINK IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO.
IFLA_BRIDGE_CFM_CC_PEER_STATUS_SEQ_UNEXP_SEEN:
A CCM frame with unexpected sequence number has been received
from Peer MEP.
The type is NLA_U32 (bool).
When a sequence number is not one higher than previously received
then it is unexpected.
This is cleared after GETLINK IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO.
Signed-off-by: Henrik Bjoernlund <henrik.bjoernlund@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is the implementation of CFM netlink status
get information interface.
Add new nested netlink attributes. These attributes are used by the
user space to get status information.
GETLINK:
Request filter RTEXT_FILTER_CFM_STATUS:
Indicating that CFM status information must be delivered.
IFLA_BRIDGE_CFM:
Points to the CFM information.
IFLA_BRIDGE_CFM_MEP_STATUS_INFO:
This indicate that the MEP instance status are following.
IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO:
This indicate that the peer MEP status are following.
CFM nested attribute has the following attributes in next level.
GETLINK RTEXT_FILTER_CFM_STATUS:
IFLA_BRIDGE_CFM_MEP_STATUS_INSTANCE:
The MEP instance number of the delivered status.
The type is u32.
IFLA_BRIDGE_CFM_MEP_STATUS_OPCODE_UNEXP_SEEN:
The MEP instance received CFM PDU with unexpected Opcode.
The type is u32 (bool).
IFLA_BRIDGE_CFM_MEP_STATUS_VERSION_UNEXP_SEEN:
The MEP instance received CFM PDU with unexpected version.
The type is u32 (bool).
IFLA_BRIDGE_CFM_MEP_STATUS_RX_LEVEL_LOW_SEEN:
The MEP instance received CCM PDU with MD level lower than
configured level. This frame is discarded.
The type is u32 (bool).
IFLA_BRIDGE_CFM_CC_PEER_STATUS_INSTANCE:
The MEP instance number of the delivered status.
The type is u32.
IFLA_BRIDGE_CFM_CC_PEER_STATUS_PEER_MEPID:
The added Peer MEP ID of the delivered status.
The type is u32.
IFLA_BRIDGE_CFM_CC_PEER_STATUS_CCM_DEFECT:
The CCM defect status.
The type is u32 (bool).
True means no CCM frame is received for 3.25 intervals.
IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL.
IFLA_BRIDGE_CFM_CC_PEER_STATUS_RDI:
The last received CCM PDU RDI.
The type is u32 (bool).
IFLA_BRIDGE_CFM_CC_PEER_STATUS_PORT_TLV_VALUE:
The last received CCM PDU Port Status TLV value field.
The type is u8.
IFLA_BRIDGE_CFM_CC_PEER_STATUS_IF_TLV_VALUE:
The last received CCM PDU Interface Status TLV value field.
The type is u8.
IFLA_BRIDGE_CFM_CC_PEER_STATUS_SEEN:
A CCM frame has been received from Peer MEP.
The type is u32 (bool).
This is cleared after GETLINK IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO.
IFLA_BRIDGE_CFM_CC_PEER_STATUS_TLV_SEEN:
A CCM frame with TLV has been received from Peer MEP.
The type is u32 (bool).
This is cleared after GETLINK IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO.
IFLA_BRIDGE_CFM_CC_PEER_STATUS_SEQ_UNEXP_SEEN:
A CCM frame with unexpected sequence number has been received
from Peer MEP.
The type is u32 (bool).
When a sequence number is not one higher than previously received
then it is unexpected.
This is cleared after GETLINK IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO.
Signed-off-by: Henrik Bjoernlund <henrik.bjoernlund@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is the implementation of CFM netlink configuration
get information interface.
Add new nested netlink attributes. These attributes are used by the
user space to get configuration information.
GETLINK:
Request filter RTEXT_FILTER_CFM_CONFIG:
Indicating that CFM configuration information must be delivered.
IFLA_BRIDGE_CFM:
Points to the CFM information.
IFLA_BRIDGE_CFM_MEP_CREATE_INFO:
This indicate that MEP instance create parameters are following.
IFLA_BRIDGE_CFM_MEP_CONFIG_INFO:
This indicate that MEP instance config parameters are following.
IFLA_BRIDGE_CFM_CC_CONFIG_INFO:
This indicate that MEP instance CC functionality
parameters are following.
IFLA_BRIDGE_CFM_CC_RDI_INFO:
This indicate that CC transmitted CCM PDU RDI
parameters are following.
IFLA_BRIDGE_CFM_CC_CCM_TX_INFO:
This indicate that CC transmitted CCM PDU parameters are
following.
IFLA_BRIDGE_CFM_CC_PEER_MEP_INFO:
This indicate that the added peer MEP IDs are following.
CFM nested attribute has the following attributes in next level.
GETLINK RTEXT_FILTER_CFM_CONFIG:
IFLA_BRIDGE_CFM_MEP_CREATE_INSTANCE:
The created MEP instance number.
The type is u32.
IFLA_BRIDGE_CFM_MEP_CREATE_DOMAIN:
The created MEP domain.
The type is u32 (br_cfm_domain).
It must be BR_CFM_PORT.
This means that CFM frames are transmitted and received
directly on the port - untagged. Not in a VLAN.
IFLA_BRIDGE_CFM_MEP_CREATE_DIRECTION:
The created MEP direction.
The type is u32 (br_cfm_mep_direction).
It must be BR_CFM_MEP_DIRECTION_DOWN.
This means that CFM frames are transmitted and received on
the port. Not in the bridge.
IFLA_BRIDGE_CFM_MEP_CREATE_IFINDEX:
The created MEP residence port ifindex.
The type is u32 (ifindex).
IFLA_BRIDGE_CFM_MEP_DELETE_INSTANCE:
The deleted MEP instance number.
The type is u32.
IFLA_BRIDGE_CFM_MEP_CONFIG_INSTANCE:
The configured MEP instance number.
The type is u32.
IFLA_BRIDGE_CFM_MEP_CONFIG_UNICAST_MAC:
The configured MEP unicast MAC address.
The type is 6*u8 (array).
This is used as SMAC in all transmitted CFM frames.
IFLA_BRIDGE_CFM_MEP_CONFIG_MDLEVEL:
The configured MEP unicast MD level.
The type is u32.
It must be in the range 1-7.
No CFM frames are passing through this MEP on lower levels.
IFLA_BRIDGE_CFM_MEP_CONFIG_MEPID:
The configured MEP ID.
The type is u32.
It must be in the range 0-0x1FFF.
This MEP ID is inserted in any transmitted CCM frame.
IFLA_BRIDGE_CFM_CC_CONFIG_INSTANCE:
The configured MEP instance number.
The type is u32.
IFLA_BRIDGE_CFM_CC_CONFIG_ENABLE:
The Continuity Check (CC) functionality is enabled or disabled.
The type is u32 (bool).
IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL:
The CC expected receive interval of CCM frames.
The type is u32 (br_cfm_ccm_interval).
This is also the transmission interval of CCM frames when enabled.
IFLA_BRIDGE_CFM_CC_CONFIG_EXP_MAID:
The CC expected receive MAID in CCM frames.
The type is CFM_MAID_LENGTH*u8.
This is MAID is also inserted in transmitted CCM frames.
IFLA_BRIDGE_CFM_CC_PEER_MEP_INSTANCE:
The configured MEP instance number.
The type is u32.
IFLA_BRIDGE_CFM_CC_PEER_MEPID:
The CC Peer MEP ID added.
The type is u32.
When a Peer MEP ID is added and CC is enabled it is expected to
receive CCM frames from that Peer MEP.
IFLA_BRIDGE_CFM_CC_RDI_INSTANCE:
The configured MEP instance number.
The type is u32.
IFLA_BRIDGE_CFM_CC_RDI_RDI:
The RDI that is inserted in transmitted CCM PDU.
The type is u32 (bool).
IFLA_BRIDGE_CFM_CC_CCM_TX_INSTANCE:
The configured MEP instance number.
The type is u32.
IFLA_BRIDGE_CFM_CC_CCM_TX_DMAC:
The transmitted CCM frame destination MAC address.
The type is 6*u8 (array).
This is used as DMAC in all transmitted CFM frames.
IFLA_BRIDGE_CFM_CC_CCM_TX_SEQ_NO_UPDATE:
The transmitted CCM frame update (increment) of sequence
number is enabled or disabled.
The type is u32 (bool).
IFLA_BRIDGE_CFM_CC_CCM_TX_PERIOD:
The period of time where CCM frame are transmitted.
The type is u32.
The time is given in seconds. SETLINK IFLA_BRIDGE_CFM_CC_CCM_TX
must be done before timeout to keep transmission alive.
When period is zero any ongoing CCM frame transmission
will be stopped.
IFLA_BRIDGE_CFM_CC_CCM_TX_IF_TLV:
The transmitted CCM frame update with Interface Status TLV
is enabled or disabled.
The type is u32 (bool).
IFLA_BRIDGE_CFM_CC_CCM_TX_IF_TLV_VALUE:
The transmitted Interface Status TLV value field.
The type is u8.
IFLA_BRIDGE_CFM_CC_CCM_TX_PORT_TLV:
The transmitted CCM frame update with Port Status TLV is enabled
or disabled.
The type is u32 (bool).
IFLA_BRIDGE_CFM_CC_CCM_TX_PORT_TLV_VALUE:
The transmitted Port Status TLV value field.
The type is u8.
Signed-off-by: Henrik Bjoernlund <henrik.bjoernlund@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is the implementation of CFM netlink configuration
set information interface.
Add new nested netlink attributes. These attributes are used by the
user space to create/delete/configure CFM instances.
SETLINK:
IFLA_BRIDGE_CFM:
Indicate that the following attributes are CFM.
IFLA_BRIDGE_CFM_MEP_CREATE:
This indicate that a MEP instance must be created.
IFLA_BRIDGE_CFM_MEP_DELETE:
This indicate that a MEP instance must be deleted.
IFLA_BRIDGE_CFM_MEP_CONFIG:
This indicate that a MEP instance must be configured.
IFLA_BRIDGE_CFM_CC_CONFIG:
This indicate that a MEP instance Continuity Check (CC)
functionality must be configured.
IFLA_BRIDGE_CFM_CC_PEER_MEP_ADD:
This indicate that a CC Peer MEP must be added.
IFLA_BRIDGE_CFM_CC_PEER_MEP_REMOVE:
This indicate that a CC Peer MEP must be removed.
IFLA_BRIDGE_CFM_CC_CCM_TX:
This indicate that the CC transmitted CCM PDU must be configured.
IFLA_BRIDGE_CFM_CC_RDI:
This indicate that the CC transmitted CCM PDU RDI must be
configured.
CFM nested attribute has the following attributes in next level.
SETLINK RTEXT_FILTER_CFM_CONFIG:
IFLA_BRIDGE_CFM_MEP_CREATE_INSTANCE:
The created MEP instance number.
The type is u32.
IFLA_BRIDGE_CFM_MEP_CREATE_DOMAIN:
The created MEP domain.
The type is u32 (br_cfm_domain).
It must be BR_CFM_PORT.
This means that CFM frames are transmitted and received
directly on the port - untagged. Not in a VLAN.
IFLA_BRIDGE_CFM_MEP_CREATE_DIRECTION:
The created MEP direction.
The type is u32 (br_cfm_mep_direction).
It must be BR_CFM_MEP_DIRECTION_DOWN.
This means that CFM frames are transmitted and received on
the port. Not in the bridge.
IFLA_BRIDGE_CFM_MEP_CREATE_IFINDEX:
The created MEP residence port ifindex.
The type is u32 (ifindex).
IFLA_BRIDGE_CFM_MEP_DELETE_INSTANCE:
The deleted MEP instance number.
The type is u32.
IFLA_BRIDGE_CFM_MEP_CONFIG_INSTANCE:
The configured MEP instance number.
The type is u32.
IFLA_BRIDGE_CFM_MEP_CONFIG_UNICAST_MAC:
The configured MEP unicast MAC address.
The type is 6*u8 (array).
This is used as SMAC in all transmitted CFM frames.
IFLA_BRIDGE_CFM_MEP_CONFIG_MDLEVEL:
The configured MEP unicast MD level.
The type is u32.
It must be in the range 1-7.
No CFM frames are passing through this MEP on lower levels.
IFLA_BRIDGE_CFM_MEP_CONFIG_MEPID:
The configured MEP ID.
The type is u32.
It must be in the range 0-0x1FFF.
This MEP ID is inserted in any transmitted CCM frame.
IFLA_BRIDGE_CFM_CC_CONFIG_INSTANCE:
The configured MEP instance number.
The type is u32.
IFLA_BRIDGE_CFM_CC_CONFIG_ENABLE:
The Continuity Check (CC) functionality is enabled or disabled.
The type is u32 (bool).
IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL:
The CC expected receive interval of CCM frames.
The type is u32 (br_cfm_ccm_interval).
This is also the transmission interval of CCM frames when enabled.
IFLA_BRIDGE_CFM_CC_CONFIG_EXP_MAID:
The CC expected receive MAID in CCM frames.
The type is CFM_MAID_LENGTH*u8.
This is MAID is also inserted in transmitted CCM frames.
IFLA_BRIDGE_CFM_CC_PEER_MEP_INSTANCE:
The configured MEP instance number.
The type is u32.
IFLA_BRIDGE_CFM_CC_PEER_MEPID:
The CC Peer MEP ID added.
The type is u32.
When a Peer MEP ID is added and CC is enabled it is expected to
receive CCM frames from that Peer MEP.
IFLA_BRIDGE_CFM_CC_RDI_INSTANCE:
The configured MEP instance number.
The type is u32.
IFLA_BRIDGE_CFM_CC_RDI_RDI:
The RDI that is inserted in transmitted CCM PDU.
The type is u32 (bool).
IFLA_BRIDGE_CFM_CC_CCM_TX_INSTANCE:
The configured MEP instance number.
The type is u32.
IFLA_BRIDGE_CFM_CC_CCM_TX_DMAC:
The transmitted CCM frame destination MAC address.
The type is 6*u8 (array).
This is used as DMAC in all transmitted CFM frames.
IFLA_BRIDGE_CFM_CC_CCM_TX_SEQ_NO_UPDATE:
The transmitted CCM frame update (increment) of sequence
number is enabled or disabled.
The type is u32 (bool).
IFLA_BRIDGE_CFM_CC_CCM_TX_PERIOD:
The period of time where CCM frame are transmitted.
The type is u32.
The time is given in seconds. SETLINK IFLA_BRIDGE_CFM_CC_CCM_TX
must be done before timeout to keep transmission alive.
When period is zero any ongoing CCM frame transmission
will be stopped.
IFLA_BRIDGE_CFM_CC_CCM_TX_IF_TLV:
The transmitted CCM frame update with Interface Status TLV
is enabled or disabled.
The type is u32 (bool).
IFLA_BRIDGE_CFM_CC_CCM_TX_IF_TLV_VALUE:
The transmitted Interface Status TLV value field.
The type is u8.
IFLA_BRIDGE_CFM_CC_CCM_TX_PORT_TLV:
The transmitted CCM frame update with Port Status TLV is enabled
or disabled.
The type is u32 (bool).
IFLA_BRIDGE_CFM_CC_CCM_TX_PORT_TLV_VALUE:
The transmitted Port Status TLV value field.
The type is u8.
Signed-off-by: Henrik Bjoernlund <henrik.bjoernlund@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is the third commit of the implementation of the CFM protocol
according to 802.1Q section 12.14.
Functionality is extended with CCM frame reception.
The MEP instance now contains CCM based status information.
Most important is the CCM defect status indicating if correct
CCM frames are received with the expected interval.
Signed-off-by: Henrik Bjoernlund <henrik.bjoernlund@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is the second commit of the implementation of the CFM protocol
according to 802.1Q section 12.14.
Functionality is extended with CCM frame transmission.
Interface is extended with these functions:
br_cfm_cc_rdi_set()
br_cfm_cc_ccm_tx()
br_cfm_cc_config_set()
A MEP Continuity Check feature can be configured by
br_cfm_cc_config_set()
The Continuity Check parameters can be configured to be used when
transmitting CCM.
A MEP can be configured to start or stop transmission of CCM frames by
br_cfm_cc_ccm_tx()
The CCM will be transmitted for a selected period in seconds.
Must call this function before timeout to keep transmission alive.
A MEP transmitting CCM can be configured with inserted RDI in PDU by
br_cfm_cc_rdi_set()
Signed-off-by: Henrik Bjoernlund <henrik.bjoernlund@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is the first commit of the implementation of the CFM protocol
according to 802.1Q section 12.14.
It contains MEP instance create, delete and configuration.
Connectivity Fault Management (CFM) comprises capabilities for
detecting, verifying, and isolating connectivity failures in
Virtual Bridged Networks. These capabilities can be used in
networks operated by multiple independent organizations, each
with restricted management access to each others equipment.
CFM functions are partitioned as follows:
- Path discovery
- Fault detection
- Fault verification and isolation
- Fault notification
- Fault recovery
Interface consists of these functions:
br_cfm_mep_create()
br_cfm_mep_delete()
br_cfm_mep_config_set()
br_cfm_cc_config_set()
br_cfm_cc_peer_mep_add()
br_cfm_cc_peer_mep_remove()
A MEP instance is created by br_cfm_mep_create()
-It is the Maintenance association End Point
described in 802.1Q section 19.2.
-It is created on a specific level (1-7) and is assuring
that no CFM frames are passing through this MEP on lower levels.
-It initiates and validates CFM frames on its level.
-It can only exist on a port that is related to a bridge.
-Attributes given cannot be changed until the instance is
deleted.
A MEP instance can be deleted by br_cfm_mep_delete().
A created MEP instance has attributes that can be
configured by br_cfm_mep_config_set().
A MEP Continuity Check feature can be configured by
br_cfm_cc_config_set()
The Continuity Check Receiver state machine can be
enabled and disabled.
According to 802.1Q section 19.2.8
A MEP can have Peer MEPs added and removed by
br_cfm_cc_peer_mep_add() and br_cfm_cc_peer_mep_remove()
The Continuity Check feature can maintain connectivity
status on each added Peer MEP.
Signed-off-by: Henrik Bjoernlund <henrik.bjoernlund@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This makes it possible to include or exclude the CFM
protocol according to 802.1Q section 12.14.
Signed-off-by: Henrik Bjoernlund <henrik.bjoernlund@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch extends the processing of frames in the bridge. Currently MRP
frames needs special processing and the current implementation doesn't
allow a nice way to process different frame types. Therefore try to
improve this by adding a list that contains frame types that need
special processing. This list is iterated for each input frame and if
there is a match based on frame type then these functions will be called
and decide what to do with the frame. It can process the frame then the
bridge doesn't need to do anything or don't process so then the bridge
will do normal forwarding.
Signed-off-by: Henrik Bjoernlund <henrik.bjoernlund@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently when an invalid ioctl command is used the error return
is -EINVAL. Fix this by returning the correct error -ENOIOCTLCMD.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When exercising the kernel with stress-ng with some ioctl tests the
"Unknown ioctl" error message is spamming the kernel log at a high
rate. Remove this message.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release regressions:
- r8169: fix forced threading conflicting with other shared
interrupts; we tried to fix the use of raise_softirq_irqoff
from an IRQ handler on RT by forcing hard irqs, but this
driver shares legacy PCI IRQs so drop the _irqoff() instead
- tipc: fix memory leak caused by a recent syzbot report fix
to tipc_buf_append()
Current release - bugs in new features:
- devlink: Unlock on error in dumpit() and fix some error codes
- net/smc: fix null pointer dereference in smc_listen_decline()
Previous release - regressions:
- tcp: Prevent low rmem stalls with SO_RCVLOWAT.
- net: protect tcf_block_unbind with block lock
- ibmveth: Fix use of ibmveth in a bridge; the self-imposed filtering
to only send legal frames to the hypervisor was too strict
- net: hns3: Clear the CMDQ registers before unmapping BAR region;
incorrect cleanup order was leading to a crash
- bnxt_en - handful of fixes to fixes:
- Send HWRM_FUNC_RESET fw command unconditionally, even
if there are PCIe errors being reported
- Check abort error state in bnxt_open_nic().
- Invoke cancel_delayed_work_sync() for PFs also.
- Fix regression in workqueue cleanup logic in bnxt_remove_one().
- mlxsw: Only advertise link modes supported by both driver
and device, after removal of 56G support from the driver
56G was not cleared from advertised modes
- net/smc: fix suppressed return code
Previous release - always broken:
- netem: fix zero division in tabledist, caused by integer overflow
- bnxt_en: Re-write PCI BARs after PCI fatal error.
- cxgb4: set up filter action after rewrites
- net: ipa: command payloads already mapped
Misc:
- s390/ism: fix incorrect system EID, it's okay to change since
it was added in current release
- vsock: use ns_capable_noaudit() on socket create to suppress
false positive audit messages
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=reLi
-----END PGP SIGNATURE-----
Merge tag 'net-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Current release regressions:
- r8169: fix forced threading conflicting with other shared
interrupts; we tried to fix the use of raise_softirq_irqoff from an
IRQ handler on RT by forcing hard irqs, but this driver shares
legacy PCI IRQs so drop the _irqoff() instead
- tipc: fix memory leak caused by a recent syzbot report fix to
tipc_buf_append()
Current release - bugs in new features:
- devlink: Unlock on error in dumpit() and fix some error codes
- net/smc: fix null pointer dereference in smc_listen_decline()
Previous release - regressions:
- tcp: Prevent low rmem stalls with SO_RCVLOWAT.
- net: protect tcf_block_unbind with block lock
- ibmveth: Fix use of ibmveth in a bridge; the self-imposed filtering
to only send legal frames to the hypervisor was too strict
- net: hns3: Clear the CMDQ registers before unmapping BAR region;
incorrect cleanup order was leading to a crash
- bnxt_en - handful of fixes to fixes:
- Send HWRM_FUNC_RESET fw command unconditionally, even if there
are PCIe errors being reported
- Check abort error state in bnxt_open_nic().
- Invoke cancel_delayed_work_sync() for PFs also.
- Fix regression in workqueue cleanup logic in bnxt_remove_one().
- mlxsw: Only advertise link modes supported by both driver and
device, after removal of 56G support from the driver 56G was not
cleared from advertised modes
- net/smc: fix suppressed return code
Previous release - always broken:
- netem: fix zero division in tabledist, caused by integer overflow
- bnxt_en: Re-write PCI BARs after PCI fatal error.
- cxgb4: set up filter action after rewrites
- net: ipa: command payloads already mapped
Misc:
- s390/ism: fix incorrect system EID, it's okay to change since it
was added in current release
- vsock: use ns_capable_noaudit() on socket create to suppress false
positive audit messages"
* tag 'net-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (36 commits)
r8169: fix issue with forced threading in combination with shared interrupts
netem: fix zero division in tabledist
ibmvnic: fix ibmvnic_set_mac
mptcp: add missing memory scheduling in the rx path
tipc: fix memory leak caused by tipc_buf_append()
gtp: fix an use-before-init in gtp_newlink()
net: protect tcf_block_unbind with block lock
ibmveth: Fix use of ibmveth in a bridge.
net/sched: act_mpls: Add softdep on mpls_gso.ko
ravb: Fix bit fields checking in ravb_hwtstamp_get()
devlink: Unlock on error in dumpit()
devlink: Fix some error codes
chelsio/chtls: fix memory leaks in CPL handlers
chelsio/chtls: fix deadlock issue
net: hns3: Clear the CMDQ registers before unmapping BAR region
bnxt_en: Send HWRM_FUNC_RESET fw command unconditionally.
bnxt_en: Check abort error state in bnxt_open_nic().
bnxt_en: Re-write PCI BARs after PCI fatal error.
bnxt_en: Invoke cancel_delayed_work_sync() for PFs also.
bnxt_en: Fix regression in workqueue cleanup logic in bnxt_remove_one().
...
Currently it is possible to craft a special netlink RTM_NEWQDISC
command that can result in jitter being equal to 0x80000000. It is
enough to set the 32 bit jitter to 0x02000000 (it will later be
multiplied by 2^6) or just set the 64 bit jitter via
TCA_NETEM_JITTER64. This causes an overflow during the generation of
uniformly distributed numbers in tabledist(), which in turn leads to
division by zero (sigma != 0, but sigma * 2 is 0).
The related fragment of code needs 32-bit division - see commit
9b0ed89 ("netem: remove unnecessary 64 bit modulus"), so switching to
64 bit is not an option.
Fix the issue by keeping the value of jitter within the range that can
be adequately handled by tabledist() - [0;INT_MAX]. As negative std
deviation makes no sense, take the absolute value of the passed value
and cap it at INT_MAX. Inside tabledist(), switch to unsigned 32 bit
arithmetic in order to prevent overflows.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Aleksandr Nogikh <nogikh@google.com>
Reported-by: syzbot+ec762a6342ad0d3c0d8f@syzkaller.appspotmail.com
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Link: https://lore.kernel.org/r/20201028170731.1383332-1-aleksandrnogikh@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are no known users of this driver as of October 2020, and it will
be removed unless someone turns out to still need it in future releases.
According to https://en.wikipedia.org/wiki/List_of_WiMAX_networks, there
have been many public wimax networks, but it appears that many of these
have migrated to LTE or discontinued their service altogether.
As most PCs and phones lack WiMAX hardware support, the remaining
networks tend to use standalone routers. These almost certainly
run Linux, but not a modern kernel or the mainline wimax driver stack.
NetworkManager appears to have dropped userspace support in 2015
https://bugzilla.gnome.org/show_bug.cgi?id=747846, the
www.linuxwimax.org
site had already shut down earlier.
WiMax is apparently still being deployed on airport campus networks
("AeroMACS"), but in a frequency band that was not supported by the old
Intel 2400m (used in Sandy Bridge laptops and earlier), which is the
only driver using the kernel's wimax stack.
Move all files into drivers/staging/wimax, including the uapi header
files and documentation, to make it easier to remove it when it gets
to that. Only minimal changes are made to the source files, in order
to make it possible to port patches across the move.
Also remove the MAINTAINERS entry that refers to a broken mailing
list and website.
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-By: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Suggested-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
gcc -Wextra points out multiple fields that use the same index '1'
in the wimax_gnl_policy definition:
net/wimax/stack.c:393:29: warning: initialized field overwritten [-Woverride-init]
net/wimax/stack.c:397:28: warning: initialized field overwritten [-Woverride-init]
net/wimax/stack.c:398:26: warning: initialized field overwritten [-Woverride-init]
This seems to work since all four use the same NLA_U32 value, but it
still appears to be wrong. In addition, there is no intializer for
WIMAX_GNL_MSG_PIPE_NAME, which uses the same index '2' as
WIMAX_GNL_RFKILL_STATE.
Johannes already changed this twice to improve it, but I don't think
there is a good solution, so try to work around it by using a
numeric index and adding comments.
Fixes: 3b0f31f2b8 ("genetlink: make policy common to family")
Fixes: b61a5eea59 ("wimax: use genl_register_family_with_ops()")
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
When moving the skbs from the subflow into the msk receive
queue, we must schedule there the required amount of memory.
Try to borrow the required memory from the subflow, if needed,
so that we leverage the existing TCP heuristic.
Fixes: 6771bfd9ee ("mptcp: update mptcp ack sequence from work queue")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Link: https://lore.kernel.org/r/f6143a6193a083574f11b00dbf7b5ad151bc4ff4.1603810630.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit ed42989eab ("tipc: fix the skb_unshare() in tipc_buf_append()")
replaced skb_unshare() with skb_copy() to not reduce the data reference
counter of the original skb intentionally. This is not the correct
way to handle the cloned skb because it causes memory leak in 2
following cases:
1/ Sending multicast messages via broadcast link
The original skb list is cloned to the local skb list for local
destination. After that, the data reference counter of each skb
in the original list has the value of 2. This causes each skb not
to be freed after receiving ACK:
tipc_link_advance_transmq()
{
...
/* release skb */
__skb_unlink(skb, &l->transmq);
kfree_skb(skb); <-- memory exists after being freed
}
2/ Sending multicast messages via replicast link
Similar to the above case, each skb cannot be freed after purging
the skb list:
tipc_mcast_xmit()
{
...
__skb_queue_purge(pkts); <-- memory exists after being freed
}
This commit fixes this issue by using skb_unshare() instead. Besides,
to avoid use-after-free error reported by KASAN, the pointer to the
fragment is set to NULL before calling skb_unshare() to make sure that
the original skb is not freed after freeing the fragment 2 times in
case skb_unshare() returns NULL.
Fixes: ed42989eab ("tipc: fix the skb_unshare() in tipc_buf_append()")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Reported-by: Thang Hoang Ngo <thang.h.ngo@dektech.com.au>
Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://lore.kernel.org/r/20201027032403.1823-1-tung.q.nguyen@dektech.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix a possible memory leak at xsk socket close that is caused by the
refcounting of the umem object being wrong. The reference count of the
umem was decremented only after the pool had been freed. Note that if
the buffer pool is destroyed, it is important that the umem is
destroyed after the pool, otherwise the umem would disappear while the
driver is still running. And as the buffer pool needs to be destroyed
in a work queue, the umem is also (if its refcount reaches zero)
destroyed after the buffer pool in that same work queue.
What was missing is that the refcount also needs to be decremented
when the pool is not freed and when the pool has not even been
created. The first case happens when the refcount of the pool is
higher than 1, i.e. it is still being used by some other socket using
the same device and queue id. In this case, it is safe to decrement
the refcount of the umem outside of the work queue as the umem will
never be freed because the refcount of the umem is always greater than
or equal to the refcount of the buffer pool. The second case is if the
buffer pool has not been created yet, i.e. the socket was closed
before it was bound but after the umem was created. In this case, it
is safe to destroy the umem outside of the work queue, since there is
no pool that can use it by definition.
Fixes: 1c1efc2af1 ("xsk: Create and free buffer pool independently from umem")
Reported-by: syzbot+eb71df123dc2be2c1456@syzkaller.appspotmail.com
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/1603801921-2712-1-git-send-email-magnus.karlsson@gmail.com
There are two flows for handling RDMA_CM_EVENT_ROUTE_RESOLVED, either the
handler triggers a completion and another thread does rdma_connect() or
the handler directly calls rdma_connect().
In all cases rdma_connect() needs to hold the handler_mutex, but when
handler's are invoked this is already held by the core code. This causes
ULPs using the 2nd method to deadlock.
Provide a rdma_connect_locked() and have all ULPs call it from their
handlers.
Link: https://lore.kernel.org/r/0-v2-53c22d5c1405+33-rdma_connect_locking_jgg@nvidia.com
Reported-and-tested-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Fixes: 2a7cec5381 ("RDMA/cma: Fix locking for the RDMA_CM_CONNECT state")
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
TCA_MPLS_ACT_PUSH and TCA_MPLS_ACT_MAC_PUSH might be used on gso
packets. Such packets will thus require mpls_gso.ko for segmentation.
v2: Drop dependency on CONFIG_NET_MPLS_GSO in Kconfig (from Jakub and
David).
Fixes: 2a2ea50870 ("net: sched: add mpls manipulation actions to TC")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Link: https://lore.kernel.org/r/1f6cab15bbd15666795061c55563aaf6a386e90e.1603708007.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This needs to unlock before returning.
Fixes: 544e7c33ec ("net: devlink: Add support for port regions")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20201026080127.GB1628785@mwanda
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These paths don't set the error codes. It's especially important in
devlink_nl_region_notify_build() where it leads to a NULL dereference in
the caller.
Fixes: 544e7c33ec ("net: devlink: Add support for port regions")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20201026080059.GA1628785@mwanda
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The patch that repaired the invalid return code in smcd_new_buf_create()
missed to take care of errno ENOSPC which has a special meaning that no
more DMBEs can be registered on the device. Fix that by keeping this
errno value during the translation of the return code.
Fixes: 6b1bbf94ab ("net/smc: fix invalid return code in smcd_new_buf_create()")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
smc_listen_work() calls smc_listen_decline() on label out_decl,
providing the ini pointer variable. But this pointer can still be null
when the label out_decl is reached.
Fix this by checking the ini variable in smc_listen_work() and call
smc_listen_decline() with the result directly.
Fixes: a7c9c5f4af ("net/smc: CLC accept / confirm V2")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During __vsock_create() CAP_NET_ADMIN is used to determine if the
vsock_sock->trusted should be set to true. This value is used later
for determing if a remote connection should be allowed to connect
to a restricted VM. Unfortunately, if the caller doesn't have
CAP_NET_ADMIN, an audit message such as an selinux denial is
generated even if the caller does not want a trusted socket.
Logging errors on success is confusing. To avoid this, switch the
capable(CAP_NET_ADMIN) check to the noaudit version.
Reported-by: Roman Kiryanov <rkir@google.com>
https://android-review.googlesource.com/c/device/generic/goldfish/+/1468545/
Signed-off-by: Jeff Vander Stoep <jeffv@google.com>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Link: https://lore.kernel.org/r/20201023143757.377574-1-jeffv@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 453431a549 ("mm, treewide: rename kzfree() to
kfree_sensitive()") renamed kzfree() to kfree_sensitive(),
but it left a compatibility definition of kzfree() to avoid
being too disruptive.
Since then a few more instances of kzfree() have slipped in.
Just get rid of them and remove the compatibility definition
once and for all.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With the removal of the interrupt perturbations in previous random32
change (random32: make prandom_u32() output unpredictable), the PRNG
has become 100% deterministic again. While SipHash is expected to be
way more robust against brute force than the previous Tausworthe LFSR,
there's still the risk that whoever has even one temporary access to
the PRNG's internal state is able to predict all subsequent draws till
the next reseed (roughly every minute). This may happen through a side
channel attack or any data leak.
This patch restores the spirit of commit f227e3ec3b ("random32: update
the net random state on interrupt and activity") in that it will perturb
the internal PRNG's statee using externally collected noise, except that
it will not pick that noise from the random pool's bits nor upon
interrupt, but will rather combine a few elements along the Tx path
that are collectively hard to predict, such as dev, skb and txq
pointers, packet length and jiffies values. These ones are combined
using a single round of SipHash into a single long variable that is
mixed with the net_rand_state upon each invocation.
The operation was inlined because it produces very small and efficient
code, typically 3 xor, 2 add and 2 rol. The performance was measured
to be the same (even very slightly better) than before the switch to
SipHash; on a 6-core 12-thread Core i7-8700k equipped with a 40G NIC
(i40e), the connection rate dropped from 556k/s to 555k/s while the
SYN cookie rate grew from 5.38 Mpps to 5.45 Mpps.
Link: https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/
Cc: George Spelvin <lkml@sdf.org>
Cc: Amit Klein <aksecurity@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: tytso@mit.edu
Cc: Florian Westphal <fw@strlen.de>
Cc: Marc Plumb <lkml.mplumb@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
With SO_RCVLOWAT, under memory pressure,
it is possible to enter a state where:
1. We have not received enough bytes to satisfy SO_RCVLOWAT.
2. We have not entered buffer pressure (see tcp_rmem_pressure()).
3. But, we do not have enough buffer space to accept more packets.
In this case, we advertise 0 rwnd (due to #3) but the application does
not drain the receive queue (no wakeup because of #1 and #2) so the
flow stalls.
Modify the heuristic for SO_RCVLOWAT so that, if we are advertising
rwnd<=rcv_mss, force a wakeup to prevent a stall.
Without this patch, setting tcp_rmem to 6143 and disabling TCP
autotune causes a stalled flow. With this patch, no stall occurs. This
is with RPC-style traffic with large messages.
Fixes: 03f45c883c ("tcp: avoid extra wakeups for SO_RCVLOWAT users")
Signed-off-by: Arjun Roy <arjunroy@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20201023184709.217614-1-arjunroy.kdev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-tree/merge window issues:
- rtl8150: don't incorrectly assign random MAC addresses; fix late
in the 5.9 cycle started depending on a return code from
a function which changed with the 5.10 PR from the usb subsystem
Current release - regressions:
- Revert "virtio-net: ethtool configurable RXCSUM", it was causing
crashes at probe when control vq was not negotiated/available
Previous releases - regressions:
- ixgbe: fix probing of multi-port 10 Gigabit Intel NICs with an MDIO
bus, only first device would be probed correctly
- nexthop: Fix performance regression in nexthop deletion by
effectively switching from recently added synchronize_rcu()
to synchronize_rcu_expedited()
- netsec: ignore 'phy-mode' device property on ACPI systems;
the property is not populated correctly by the firmware,
but firmware configures the PHY so just keep boot settings
Previous releases - always broken:
- tcp: fix to update snd_wl1 in bulk receiver fast path, addressing
bulk transfers getting "stuck"
- icmp: randomize the global rate limiter to prevent attackers from
getting useful signal
- r8169: fix operation under forced interrupt threading, make the
driver always use hard irqs, even on RT, given the handler is
light and only wants to schedule napi (and do so through
a _irqoff() variant, preferably)
- bpf: Enforce pointer id generation for all may-be-null register
type to avoid pointers erroneously getting marked as null-checked
- tipc: re-configure queue limit for broadcast link
- net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN
tunnels
- fix various issues in chelsio inline tls driver
Misc:
- bpf: improve just-added bpf_redirect_neigh() helper api to support
supplying nexthop by the caller - in case BPF program has already
done a lookup we can avoid doing another one
- remove unnecessary break statements
- make MCTCP not select IPV6, but rather depend on it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ceke
-----END PGP SIGNATURE-----
Merge tag 'net-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Cross-tree/merge window issues:
- rtl8150: don't incorrectly assign random MAC addresses; fix late in
the 5.9 cycle started depending on a return code from a function
which changed with the 5.10 PR from the usb subsystem
Current release regressions:
- Revert "virtio-net: ethtool configurable RXCSUM", it was causing
crashes at probe when control vq was not negotiated/available
Previous release regressions:
- ixgbe: fix probing of multi-port 10 Gigabit Intel NICs with an MDIO
bus, only first device would be probed correctly
- nexthop: Fix performance regression in nexthop deletion by
effectively switching from recently added synchronize_rcu() to
synchronize_rcu_expedited()
- netsec: ignore 'phy-mode' device property on ACPI systems; the
property is not populated correctly by the firmware, but firmware
configures the PHY so just keep boot settings
Previous releases - always broken:
- tcp: fix to update snd_wl1 in bulk receiver fast path, addressing
bulk transfers getting "stuck"
- icmp: randomize the global rate limiter to prevent attackers from
getting useful signal
- r8169: fix operation under forced interrupt threading, make the
driver always use hard irqs, even on RT, given the handler is light
and only wants to schedule napi (and do so through a _irqoff()
variant, preferably)
- bpf: Enforce pointer id generation for all may-be-null register
type to avoid pointers erroneously getting marked as null-checked
- tipc: re-configure queue limit for broadcast link
- net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN
tunnels
- fix various issues in chelsio inline tls driver
Misc:
- bpf: improve just-added bpf_redirect_neigh() helper api to support
supplying nexthop by the caller - in case BPF program has already
done a lookup we can avoid doing another one
- remove unnecessary break statements
- make MCTCP not select IPV6, but rather depend on it"
* tag 'net-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
tcp: fix to update snd_wl1 in bulk receiver fast path
net: Properly typecast int values to set sk_max_pacing_rate
netfilter: nf_fwd_netdev: clear timestamp in forwarding path
ibmvnic: save changed mac address to adapter->mac_addr
selftests: mptcp: depends on built-in IPv6
Revert "virtio-net: ethtool configurable RXCSUM"
rtnetlink: fix data overflow in rtnl_calcit()
net: ethernet: mtk-star-emac: select REGMAP_MMIO
net: hdlc_raw_eth: Clear the IFF_TX_SKB_SHARING flag after calling ether_setup
net: hdlc: In hdlc_rcv, check to make sure dev is an HDLC device
bpf, libbpf: Guard bpf inline asm from bpf_tail_call_static
bpf, selftests: Extend test_tc_redirect to use modified bpf_redirect_neigh()
bpf: Fix bpf_redirect_neigh helper api to support supplying nexthop
mptcp: depends on IPV6 but not as a module
sfc: move initialisation of efx->filter_sem to efx_init_struct()
mpls: load mpls_gso after mpls_iptunnel
net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN tunnels
net/sched: act_gate: Unlock ->tcfa_lock in tc_setup_flow_action()
net: dsa: bcm_sf2: make const array static, makes object smaller
mptcp: MPTCP_IPV6 should depend on IPV6 instead of selecting it
...
we found that the following race condition exists in
xfrm_alloc_userspi flow:
user thread state_hash_work thread
---- ----
xfrm_alloc_userspi()
__find_acq_core()
/*alloc new xfrm_state:x*/
xfrm_state_alloc()
/*schedule state_hash_work thread*/
xfrm_hash_grow_check() xfrm_hash_resize()
xfrm_alloc_spi /*hold lock*/
x->id.spi = htonl(spi) spin_lock_bh(&net->xfrm.xfrm_state_lock)
/*waiting lock release*/ xfrm_hash_transfer()
spin_lock_bh(&net->xfrm.xfrm_state_lock) /*add x into hlist:net->xfrm.state_byspi*/
hlist_add_head_rcu(&x->byspi)
spin_unlock_bh(&net->xfrm.xfrm_state_lock)
/*add x into hlist:net->xfrm.state_byspi 2 times*/
hlist_add_head_rcu(&x->byspi)
1. a new state x is alloced in xfrm_state_alloc() and added into the bydst hlist
in __find_acq_core() on the LHS;
2. on the RHS, state_hash_work thread travels the old bydst and tranfers every xfrm_state
(include x) into the new bydst hlist and new byspi hlist;
3. user thread on the LHS gets the lock and adds x into the new byspi hlist again.
So the same xfrm_state (x) is added into the same list_hash
(net->xfrm.state_byspi) 2 times that makes the list_hash become
an inifite loop.
To fix the race, x->id.spi = htonl(spi) in the xfrm_alloc_spi() is moved
to the back of spin_lock_bh, sothat state_hash_work thread no longer add x
which id.spi is zero into the hash_list.
Fixes: f034b5d4ef ("[XFRM]: Dynamic xfrm_state hash table sizing.")
Signed-off-by: zhuoliang zhang <zhuoliang.zhang@mediatek.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
In the header prediction fast path for a bulk data receiver, if no
data is newly acknowledged then we do not call tcp_ack() and do not
call tcp_ack_update_window(). This means that a bulk receiver that
receives large amounts of data can have the incoming sequence numbers
wrap, so that the check in tcp_may_update_window fails:
after(ack_seq, tp->snd_wl1)
If the incoming receive windows are zero in this state, and then the
connection that was a bulk data receiver later wants to send data,
that connection can find itself persistently rejecting the window
updates in incoming ACKs. This means the connection can persistently
fail to discover that the receive window has opened, which in turn
means that the connection is unable to send anything, and the
connection's sending process can get permanently "stuck".
The fix is to update snd_wl1 in the header prediction fast path for a
bulk data receiver, so that it keeps up and does not see wrapping
problems.
This fix is based on a very nice and thorough analysis and diagnosis
by Apollon Oikonomopoulos (see link below).
This is a stable candidate but there is no Fixes tag here since the
bug predates current git history. Just for fun: looks like the bug
dates back to when header prediction was added in Linux v2.1.8 in Nov
1996. In that version tcp_rcv_established() was added, and the code
only updates snd_wl1 in tcp_ack(), and in the new "Bulk data transfer:
receiver" code path it does not call tcp_ack(). This fix seems to
apply cleanly at least as far back as v3.2.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reported-by: Apollon Oikonomopoulos <apoikos@dmesg.gr>
Tested-by: Apollon Oikonomopoulos <apoikos@dmesg.gr>
Link: https://www.spinics.net/lists/netdev/msg692430.html
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20201022143331.1887495-1-ncardwell.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In setsockopt(SO_MAX_PACING_RATE) on 64bit systems, sk_max_pacing_rate,
after extended from 'u32' to 'unsigned long', takes unintentionally
hiked value whenever assigned from an 'int' value with MSB=1, due to
binary sign extension in promoting s32 to u64, e.g. 0x80000000 becomes
0xFFFFFFFF80000000.
Thus inflated sk_max_pacing_rate causes subsequent getsockopt to return
~0U unexpectedly. It may also result in increased pacing rate.
Fix by explicitly casting the 'int' value to 'unsigned int' before
assigning it to sk_max_pacing_rate, for zero extension to happen.
Fixes: 76a9ebe811 ("net: extend sk_pacing_rate to unsigned long")
Signed-off-by: Ji Li <jli@akamai.com>
Signed-off-by: Ke Li <keli@akamai.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20201022064146.79873-1-keli@akamai.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Update debugging in IPVS tcp protocol handler to make it easier
to understand, from longguang.yue
2) Update TCP tracker to deal with keepalive packet after
re-registration, from Franceso Ruggeri.
3) Missing IP6SKB_FRAGMENTED from netfilter fragment reassembly,
from Georg Kohmann.
4) Fix bogus packet drop in ebtables nat extensions, from
Thimothee Cocault.
5) Fix typo in flowtable documentation.
6) Reset skb timestamp in nft_fwd_netdev.
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf 2020-10-22
1) Fix enforcing NULL check in verifier for new helper return types of
RET_PTR_TO_{BTF_ID,MEM_OR_BTF_ID}_OR_NULL, from Martin KaFai Lau.
2) Fix bpf_redirect_neigh() helper API before it becomes frozen by adding
nexthop information as argument, from Toke Høiland-Jørgensen.
3) Guard & fix compilation of bpf_tail_call_static() when __bpf__ arch is
not defined by compiler or clang too old, from Daniel Borkmann.
4) Remove misplaced break after return in attach_type_to_prog_type(), from
Tom Rix.
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
has the same arguments as READ but allows the server to return an array
of data and hole extents.
Otherwise it's a lot of cleanup and bugfixes.
-----BEGIN PGP SIGNATURE-----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=rcOj
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.10' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"The one new feature this time, from Anna Schumaker, is READ_PLUS,
which has the same arguments as READ but allows the server to return
an array of data and hole extents.
Otherwise it's a lot of cleanup and bugfixes"
* tag 'nfsd-5.10' of git://linux-nfs.org/~bfields/linux: (43 commits)
NFSv4.2: Fix NFS4ERR_STALE error when doing inter server copy
SUNRPC: fix copying of multiple pages in gss_read_proxy_verf()
sunrpc: raise kernel RPC channel buffer size
svcrdma: fix bounce buffers for unaligned offsets and multiple pages
nfsd: remove unneeded break
net/sunrpc: Fix return value for sysctl sunrpc.transports
NFSD: Encode a full READ_PLUS reply
NFSD: Return both a hole and a data segment
NFSD: Add READ_PLUS hole segment encoding
NFSD: Add READ_PLUS data support
NFSD: Hoist status code encoding into XDR encoder functions
NFSD: Map nfserr_wrongsec outside of nfsd_dispatch
NFSD: Remove the RETURN_STATUS() macro
NFSD: Call NFSv2 encoders on error returns
NFSD: Fix .pc_release method for NFSv2
NFSD: Remove vestigial typedefs
NFSD: Refactor nfsd_dispatch() error paths
NFSD: Clean up nfsd_dispatch() variables
NFSD: Clean up stale comments in nfsd_dispatch()
NFSD: Clean up switch statement in nfsd_dispatch()
...
A couple of small fixes (loff_t overflow on 32bit, syzbot uninitialized
variable warning) and code cleanup (xen)
-----BEGIN PGP SIGNATURE-----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=ONeq
-----END PGP SIGNATURE-----
Merge tag '9p-for-5.10-rc1' of git://github.com/martinetd/linux
Pull 9p updates from Dominique Martinet:
"A couple of small fixes (loff_t overflow on 32bit, syzbot
uninitialized variable warning) and code cleanup (xen)"
* tag '9p-for-5.10-rc1' of git://github.com/martinetd/linux:
net: 9p: initialize sun_server.sun_path to have addr's value only when addr is valid
9p/xen: Fix format argument warning
9P: Cast to loff_t before multiplying
Similar to 7980d2eabd ("ipvs: clear skb->tstamp in forwarding path").
fq qdisc requires tstamp to be cleared in forwarding path.
Fixes: 8203e2d844 ("net: clear skb->tstamp in forwarding paths")
Fixes: fb420d5d91 ("tcp/fq: move back to CLOCK_MONOTONIC")
Fixes: 80b14dee2b ("net: Add a new socket option for a future transmit time.")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
"ip addr show" command execute error when we have a physical
network card with a large number of VFs
The return value of if_nlmsg_size() in rtnl_calcit() will exceed
range of u16 data type when any network cards has a larger number of
VFs. rtnl_vfinfo_size() will significant increase needed dump size when
the value of num_vfs is larger.
Eventually we get a wrong value of min_ifinfo_dump_size because of overflow
which decides the memory size needed by netlink dump and netlink_dump()
will return -EMSGSIZE because of not enough memory was allocated.
So fix it by promoting min_dump_alloc data type to u32 to
avoid whole netlink message size overflow and it's also align
with the data type of struct netlink_callback{}.min_dump_alloc
which is assigned by return value of rtnl_calcit()
Signed-off-by: Di Zhu <zhudi21@huawei.com>
Link: https://lore.kernel.org/r/20201021020053.1401-1-zhudi21@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Based on the discussion in [0], update the bpf_redirect_neigh() helper to
accept an optional parameter specifying the nexthop information. This makes
it possible to combine bpf_fib_lookup() and bpf_redirect_neigh() without
incurring a duplicate FIB lookup - since the FIB lookup helper will return
the nexthop information even if no neighbour is present, this can simply
be passed on to bpf_redirect_neigh() if bpf_fib_lookup() returns
BPF_FIB_LKUP_RET_NO_NEIGH. Thus fix & extend it before helper API is frozen.
[0] https://lore.kernel.org/bpf/393e17fc-d187-3a8d-2f0d-a627c7c63fca@iogearbox.net/
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/bpf/160322915615.32199.1187570224032024535.stgit@toke.dk
- a patch that removes crush_workspace_mutex (myself). CRUSH
computations are no longer serialized and can run in parallel.
- a couple new filesystem client metrics for "ceph fs top" command
(Xiubo Li)
- a fix for a very old messenger bug that affected the filesystem,
marked for stable (myself)
- assorted fixups and cleanups throughout the codebase from Jeff
and others.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAl+QN8cTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi4iwCACLwUvO0ONTzUUb2D8ftfyXjo/jIod5
eO7RHfCHOP2A83GQpdYdktVDSVeOUIOiPhxAxo1dL4GieI2/saXrnoevam7ogZkA
OmR4drdtRVUqF/aATrtjiDMg2ge0dnx5gfjMxSP/FiPPpXOdrtxng/7tv8yo+03q
AlMqg/YcxO06t1M1qh9SEyfzjcHyPnJU2i0ienngxnGxQ7QiMOR6anF1LNhtN803
4fTBX2tLqDNAa+x5yF1kKSn9OmFNhc0oUsqef+Ck0Vw1LC0/SuxzE2J904iehAwy
/HzJCer0zcp+eZhn3HhoHmp0UZpOC1dzMxa3CHyRJFrxCSTEhY8iqPiJ
=wGr7
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.10-rc1' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
- a patch that removes crush_workspace_mutex (myself). CRUSH
computations are no longer serialized and can run in parallel.
- a couple new filesystem client metrics for "ceph fs top" command
(Xiubo Li)
- a fix for a very old messenger bug that affected the filesystem,
marked for stable (myself)
- assorted fixups and cleanups throughout the codebase from Jeff and
others.
* tag 'ceph-for-5.10-rc1' of git://github.com/ceph/ceph-client: (27 commits)
libceph: clear con->out_msg on Policy::stateful_server faults
libceph: format ceph_entity_addr nonces as unsigned
libceph: fix ENTITY_NAME format suggestion
libceph: move a dout in queue_con_delay()
ceph: comment cleanups and clarifications
ceph: break up send_cap_msg
ceph: drop separate mdsc argument from __send_cap
ceph: promote to unsigned long long before shifting
ceph: don't SetPageError on readpage errors
ceph: mark ceph_fmt_xattr() as printf-like for better type checking
ceph: fold ceph_update_writeable_page into ceph_write_begin
ceph: fold ceph_sync_writepages into writepage_nounlock
ceph: fold ceph_sync_readpages into ceph_readpage
ceph: don't call ceph_update_writeable_page from page_mkwrite
ceph: break out writeback of incompatible snap context to separate function
ceph: add a note explaining session reject error string
libceph: switch to the new "osd blocklist add" command
libceph, rbd, ceph: "blacklist" -> "blocklist"
ceph: have ceph_writepages_start call pagevec_lookup_range_tag
ceph: use kill_anon_super helper
...
Like TCP, MPTCP cannot be compiled as a module. Obviously, MPTCP IPv6'
support also depends on CONFIG_IPV6. But not all functions from IPv6
code are exported.
To simplify the code and reduce modifications outside MPTCP, it was
decided from the beginning to support MPTCP with IPv6 only if
CONFIG_IPV6 was built inlined. That's also why CONFIG_MPTCP_IPV6 was
created. More modifications are needed to support CONFIG_IPV6=m.
Even if it was not explicit, until recently, we were forcing CONFIG_IPV6
to be built-in because we had "select IPV6" in Kconfig. Now that we have
"depends on IPV6", we have to explicitly set "IPV6=y" to force
CONFIG_IPV6 not to be built as a module.
In other words, we can now only have CONFIG_MPTCP_IPV6=y if
CONFIG_IPV6=y.
Note that the new dependency might hide the fact IPv6 is not supported
in MPTCP even if we have CONFIG_IPV6=m. But selecting IPV6 like we did
before was forcing it to be built-in while it was maybe not what the
user wants.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: 010b430d5d ("mptcp: MPTCP_IPV6 should depend on IPV6 instead of selecting it")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20201021105154.628257-1-matthieu.baerts@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mpls_iptunnel is used only for mpls encapsuation, and if encaplusated
packet is larger than MTU we need mpls_gso for segmentation.
Signed-off-by: Alexander Ovechkin <ovov@yandex-team.ru>
Acked-by: Dmitry Yakunin <zeil@yandex-team.ru>
Reviewed-by: David Ahern <dsahern@gmail.com>
Link: https://lore.kernel.org/r/20201020114333.26866-1-ovov@yandex-team.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
the following command
# tc action add action tunnel_key \
> set src_ip 2001:db8::1 dst_ip 2001:db8::2 id 10 erspan_opts 1:6789:0:0
generates the following splat:
BUG: KASAN: slab-out-of-bounds in tunnel_key_copy_opts+0xcc9/0x1010 [act_tunnel_key]
Write of size 4 at addr ffff88813f5f1cc8 by task tc/873
CPU: 2 PID: 873 Comm: tc Not tainted 5.9.0+ #282
Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014
Call Trace:
dump_stack+0x99/0xcb
print_address_description.constprop.7+0x1e/0x230
kasan_report.cold.13+0x37/0x7c
tunnel_key_copy_opts+0xcc9/0x1010 [act_tunnel_key]
tunnel_key_init+0x160c/0x1f40 [act_tunnel_key]
tcf_action_init_1+0x5b5/0x850
tcf_action_init+0x15d/0x370
tcf_action_add+0xd9/0x2f0
tc_ctl_action+0x29b/0x3a0
rtnetlink_rcv_msg+0x341/0x8d0
netlink_rcv_skb+0x120/0x380
netlink_unicast+0x439/0x630
netlink_sendmsg+0x719/0xbf0
sock_sendmsg+0xe2/0x110
____sys_sendmsg+0x5ba/0x890
___sys_sendmsg+0xe9/0x160
__sys_sendmsg+0xd3/0x170
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f872a96b338
Code: 89 02 48 c7 c0 ff ff ff ff eb b5 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 25 43 2c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 41 54 41 89 d4 55
RSP: 002b:00007ffffe367518 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 000000005f8f5aed RCX: 00007f872a96b338
RDX: 0000000000000000 RSI: 00007ffffe367580 RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000000000001 R09: 000000000000001c
R10: 000000000000000b R11: 0000000000000246 R12: 0000000000000001
R13: 0000000000686760 R14: 0000000000000601 R15: 0000000000000000
Allocated by task 873:
kasan_save_stack+0x19/0x40
__kasan_kmalloc.constprop.7+0xc1/0xd0
__kmalloc+0x151/0x310
metadata_dst_alloc+0x20/0x40
tunnel_key_init+0xfff/0x1f40 [act_tunnel_key]
tcf_action_init_1+0x5b5/0x850
tcf_action_init+0x15d/0x370
tcf_action_add+0xd9/0x2f0
tc_ctl_action+0x29b/0x3a0
rtnetlink_rcv_msg+0x341/0x8d0
netlink_rcv_skb+0x120/0x380
netlink_unicast+0x439/0x630
netlink_sendmsg+0x719/0xbf0
sock_sendmsg+0xe2/0x110
____sys_sendmsg+0x5ba/0x890
___sys_sendmsg+0xe9/0x160
__sys_sendmsg+0xd3/0x170
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The buggy address belongs to the object at ffff88813f5f1c00
which belongs to the cache kmalloc-256 of size 256
The buggy address is located 200 bytes inside of
256-byte region [ffff88813f5f1c00, ffff88813f5f1d00)
The buggy address belongs to the page:
page:0000000011b48a19 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x13f5f0
head:0000000011b48a19 order:1 compound_mapcount:0
flags: 0x17ffffc0010200(slab|head)
raw: 0017ffffc0010200 0000000000000000 0000000d00000001 ffff888107c43400
raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88813f5f1b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88813f5f1c00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff88813f5f1c80: 00 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc
^
ffff88813f5f1d00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88813f5f1d80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
using IPv6 tunnels, act_tunnel_key allocates a fixed amount of memory for
the tunnel metadata, but then it expects additional bytes to store tunnel
specific metadata with tunnel_key_copy_opts().
Fix the arguments of __ipv6_tun_set_dst(), so that 'md_size' contains the
size previously computed by tunnel_key_get_opts_len(), like it's done for
IPv4 tunnels.
Fixes: 0ed5269f9e ("net/sched: add tunnel option support to act_tunnel_key")
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://lore.kernel.org/r/36ebe969f6d13ff59912d6464a4356fe6f103766.1603231100.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We need to jump to the "err_out_locked" label when
tcf_gate_get_entries() fails. Otherwise, tc_setup_flow_action() exits
with ->tcfa_lock still held.
Fixes: d29bdd69ec ("net: schedule: add action gate offloading")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://lore.kernel.org/r/12f60e385584c52c22863701c0185e40ab08a7a7.1603207948.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MPTCP_IPV6 selects IPV6, thus enabling an optional feature the user may
not want to enable. Fix this by making MPTCP_IPV6 depend on IPV6, like
is done for all other IPv6 features.
Fixes: f870fa0b57 ("mptcp: Add MPTCP socket stubs")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20201020073839.29226-1-geert@linux-m68k.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Check that the NFC_ATTR_FIRMWARE_NAME attributes are provided by
the netlink client prior to accessing them.This prevents potential
unhandled NULL pointer dereference exceptions which can be triggered
by malicious user-mode programs, if they omit one or both of these
attributes.
Similar to commit a0323b979f ("nfc: Ensure presence of required attributes in the activate_target handler").
Fixes: 9674da8759 ("NFC: Add firmware upload netlink command")
Signed-off-by: Defang Bo <bodefang@126.com>
Link: https://lore.kernel.org/r/1603107538-4744-1-git-send-email-bodefang@126.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MPTCP_KUNIT_TESTS selects MPTCP, thus enabling an optional feature the
user may not want to enable. Fix this by making the test depend on
MPTCP instead.
Fixes: a00a582203 ("mptcp: move crypto test to KUNIT")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20201019113240.11516-1-geert@linux-m68k.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move mptcp_options_received's port initialization from
mptcp_parse_option to mptcp_get_options, put it together with
the other fields initializations of mptcp_options_received.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Initialize mptcp_options_received's ahmac to zero, otherwise it
will be a random number when receiving ADD_ADDR suboption with echo-flag=1.
Fixes: 3df523ab58 ("mptcp: Add ADD_ADDR handling")
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Need to use the udp header type and not tcp.
Fixes: 9c26ba9b1f ("net/sched: act_ct: Instantiate flow table entry actions")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Link: https://lore.kernel.org/r/20201019090244.3015186-1-roid@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Stable Fixes:
- Wait for stateid updates after CLOSE/OPEN_DOWNGRADE # v5.4+
- Fix nfs_path in case of a rename retry
- Support EXCHID4_FLAG_SUPP_FENCE_OPS v4.2 EXCHANGE_ID flag
- New features and improvements:
- Replace dprintk() calls with tracepoints
- Make cache consistency bitmap dynamic
- Added support for the NFS v4.2 READ_PLUS operation
- Improvements to net namespace uniquifier
- Other bugfixes and cleanups
- Remove redundant clnt pointer
- Don't update timeout values on connection resets
- Remove redundant tracepoints
- Various cleanups to comments
- Fix oops when trying to use copy_file_range with v4.0 source server
- Improvements to flexfiles mirrors
- Add missing "local_lock=posix" mount option
-----BEGIN PGP SIGNATURE-----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=6RM5
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-5.10-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client updates from Anna Schumaker:
"Stable Fixes:
- Wait for stateid updates after CLOSE/OPEN_DOWNGRADE # v5.4+
- Fix nfs_path in case of a rename retry
- Support EXCHID4_FLAG_SUPP_FENCE_OPS v4.2 EXCHANGE_ID flag
New features and improvements:
- Replace dprintk() calls with tracepoints
- Make cache consistency bitmap dynamic
- Added support for the NFS v4.2 READ_PLUS operation
- Improvements to net namespace uniquifier
Other bugfixes and cleanups:
- Remove redundant clnt pointer
- Don't update timeout values on connection resets
- Remove redundant tracepoints
- Various cleanups to comments
- Fix oops when trying to use copy_file_range with v4.0 source server
- Improvements to flexfiles mirrors
- Add missing 'local_lock=posix' mount option"
* tag 'nfs-for-5.10-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (55 commits)
NFSv4.2: support EXCHGID4_FLAG_SUPP_FENCE_OPS 4.2 EXCHANGE_ID flag
NFSv4: Fix up RCU annotations for struct nfs_netns_client
NFS: Only reference user namespace from nfs4idmap struct instead of cred
nfs: add missing "posix" local_lock constant table definition
NFSv4: Use the net namespace uniquifier if it is set
NFSv4: Clean up initialisation of uniquified client id strings
NFS: Decode a full READ_PLUS reply
SUNRPC: Add an xdr_align_data() function
NFS: Add READ_PLUS hole segment decoding
SUNRPC: Add the ability to expand holes in data pages
SUNRPC: Split out _shift_data_right_tail()
SUNRPC: Split out xdr_realign_pages() from xdr_align_pages()
NFS: Add READ_PLUS data segment support
NFS: Use xdr_page_pos() in NFSv4 decode_getacl()
SUNRPC: Implement a xdr_page_pos() function
SUNRPC: Split out a function for setting current page
NFS: fix nfs_path in case of a rename retry
fs: nfs: return per memcg count for xattr shrinkers
NFSv4: Wait for stateid updates after CLOSE/OPEN_DOWNGRADE
nfs: remove incorrect fallthrough label
...
When the passed token is longer than 4032 bytes, the remaining part
of the token must be copied from the rqstp->rq_arg.pages. But the
copy must make sure it happens in a consecutive way.
With the existing code, the first memcpy copies 'length' bytes from
argv->iobase, but since the header is in front, this never fills the
whole first page of in_token->pages.
The mecpy in the loop copies the following bytes, but starts writing at
the next page of in_token->pages. This leaves the last bytes of page 0
unwritten.
Symptoms were that users with many groups were not able to access NFS
exports, when using Active Directory as the KDC.
Signed-off-by: Martijn de Gouw <martijn.de.gouw@prodrive-technologies.com>
Fixes: 5866efa8cb "SUNRPC: Fix svcauth_gss_proxy_init()"
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Its possible that using AUTH_SYS and mountd manage-gids option a
user may hit the 8k RPC channel buffer limit. This have been observed
on field, causing unanswered RPCs on clients after mountd fails to
write on channel :
rpc.mountd[11231]: auth_unix_gid: error writing reply
Userland nfs-utils uses a buffer size of 32k (RPC_CHAN_BUF_SIZE), so
lets match those two.
Signed-off-by: Roberto Bergantinos Corpas <rbergant@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This patch fixes the issue due to:
BUG: KASAN: slab-out-of-bounds in nft_flow_rule_create+0x622/0x6a2
net/netfilter/nf_tables_offload.c:40
Read of size 8 at addr ffff888103910b58 by task syz-executor227/16244
The error happens when expr->ops is accessed early on before performing the boundary check and after nft_expr_next() moves the expr to go out-of-bounds.
This patch checks the boundary condition before expr->ops that fixes the slab-out-of-bounds Read issue.
Add nft_expr_more() and use it to fix this problem.
Signed-off-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Fixes an error causing small packets to get dropped. skb_ensure_writable
expects the second parameter to be a length in the ethernet payload.=20
If we want to write the ethernet header (src, dst), we should pass 0.
Otherwise, packets with small payloads (< ETH_ALEN) will get dropped.
Fixes: c1a8311679 ("netfilter: bridge: convert skb_make_writable to skb_ensure_writable")
Signed-off-by: Timothée COCAULT <timothee.cocault@orange.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Fragmented ndisc packets assembled in netfilter not dropped as specified
in RFC 6980, section 5. This behaviour breaks TAHI IPv6 Core Conformance
Tests v6LC.2.1.22/23, V6LC.2.2.26/27 and V6LC.2.3.18.
Setting IP6SKB_FRAGMENTED flag during reassembly.
References: commit b800c3b966 ("ipv6: drop fragmented ndisc packets by default (RFC 6980)")
Signed-off-by: Georg Kohmann <geokohma@cisco.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
If the first packet conntrack sees after a re-register is an outgoing
keepalive packet with no data (SEG.SEQ = SND.NXT-1), td_end is set to
SND.NXT-1.
When the peer correctly acknowledges SND.NXT, tcp_in_window fails
check III (Upper bound for valid (s)ack: sack <= receiver.td_end) and
returns false, which cascades into nf_conntrack_in setting
skb->_nfct = 0 and in later conntrack iptables rules not matching.
In cases where iptables are dropping packets that do not match
conntrack rules this can result in idle tcp connections to time out.
v2: adjust td_end when getting the reply rather than when sending out
the keepalive packet.
Fixes: f94e63801a ("netfilter: conntrack: reset tcp maxwin on re-register")
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Outputting client,virtual,dst addresses info when tcp state changes,
which makes the connection debug more clear
Signed-off-by: longguang.yue <bigclouds@163.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
While insertion of 16k nexthops all using the same netdev ('dummy10')
takes less than a second, deletion takes about 130 seconds:
# time -p ip -b nexthop.batch
real 0.29
user 0.01
sys 0.15
# time -p ip link set dev dummy10 down
real 131.03
user 0.06
sys 0.52
This is because of repeated calls to synchronize_rcu() whenever a
nexthop is removed from a nexthop group:
# /usr/share/bcc/tools/offcputime -p `pgrep -nx ip` -K
...
b'finish_task_switch'
b'schedule'
b'schedule_timeout'
b'wait_for_completion'
b'__wait_rcu_gp'
b'synchronize_rcu.part.0'
b'synchronize_rcu'
b'__remove_nexthop'
b'remove_nexthop'
b'nexthop_flush_dev'
b'nh_netdev_event'
b'raw_notifier_call_chain'
b'call_netdevice_notifiers_info'
b'__dev_notify_flags'
b'dev_change_flags'
b'do_setlink'
b'__rtnl_newlink'
b'rtnl_newlink'
b'rtnetlink_rcv_msg'
b'netlink_rcv_skb'
b'rtnetlink_rcv'
b'netlink_unicast'
b'netlink_sendmsg'
b'____sys_sendmsg'
b'___sys_sendmsg'
b'__sys_sendmsg'
b'__x64_sys_sendmsg'
b'do_syscall_64'
b'entry_SYSCALL_64_after_hwframe'
- ip (277)
126554955
Since nexthops are always deleted under RTNL, synchronize_net() can be
used instead. It will call synchronize_rcu_expedited() which only blocks
for several microseconds as opposed to multiple milliseconds like
synchronize_rcu().
With this patch deletion of 16k nexthops takes less than a second:
# time -p ip link set dev dummy10 down
real 0.12
user 0.00
sys 0.04
Tested with fib_nexthops.sh which includes torture tests that prompted
the initial change:
# ./fib_nexthops.sh
...
Tests passed: 134
Tests failed: 0
Fixes: 90f33bffa3 ("nexthops: don't modify published nexthop groups")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Link: https://lore.kernel.org/r/20201016172914.643282-1-idosch@idosch.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Marvell 88E6060 uses tag_trailer.c and the KSZ8795, KSZ9477 and
KSZ9893 switches also use tail tags.
Fixes: 7a6ffe764b ("net: dsa: point out the tail taggers")
Signed-off-by: Christian Eggers <ceggers@arri.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20201016171603.10587-1-ceggers@arri.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The flow_lookup() function uses per CPU variables, which must be called
with BH disabled. However, this is fine in the general NAPI use case
where the local BH is disabled. But, it's also called from the netlink
context. The below patch makes sure that even in the netlink path, the
BH is disabled.
In addition, u64_stats_update_begin() requires a lock to ensure one writer
which is not ensured here. Making it per-CPU and disabling NAPI (softirq)
ensures that there is always only one writer.
Fixes: eac87c413b ("net: openvswitch: reorder masks array based on usage")
Reported-by: Juri Lelli <jlelli@redhat.com>
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://lore.kernel.org/r/160295903253.7789.826736662555102345.stgit@ebuild
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Keyu Man reported that the ICMP rate limiter could be used
by attackers to get useful signal. Details will be provided
in an upcoming academic publication.
Our solution is to add some noise, so that the attackers
no longer can get help from the predictable token bucket limiter.
Fixes: 4cdf507d54 ("icmp: add a global rate limitation")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Keyu Man <kman001@ucr.edu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In commit 16ad3f4022
("tipc: introduce variable window congestion control"), we applied
the algorithm to select window size from minimum window to the
configured maximum window for unicast link, and, besides we chose
to keep the window size for broadcast link unchanged and equal (i.e
fix window 50)
However, when setting maximum window variable via command, the window
variable was re-initialized to unexpect value (i.e 32).
We fix this by updating the fix window for broadcast as we stated.
Fixes: 16ad3f4022 ("tipc: introduce variable window congestion control")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hoang Huu Le <hoang.h.le@dektech.com.au>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The queue limit of the broadcast link is being calculated base on initial
MTU. However, when MTU value changed (e.g manual changing MTU on NIC
device, MTU negotiation etc.,) we do not re-calculate queue limit.
This gives throughput does not reflect with the change.
So fix it by calling the function to re-calculate queue limit of the
broadcast link.
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hoang Huu Le <hoang.h.le@dektech.com.au>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This was discovered using O_DIRECT at the client side, with small
unaligned file offsets or IOs that span multiple file pages.
Fixes: e248aa7be8 ("svcrdma: Remove max_sge check at connect time")
Signed-off-by: Dan Aloni <dan@kernelim.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Fix returning value for sysctl sunrpc.transports.
Return error code from sysctl proc_handler function proc_do_xprt instead of number of the written bytes.
Otherwise sysctl returns random garbage for this key.
Since v1:
- Handle negative returned value from memory_read_from_buffer as an error
Signed-off-by: Artur Molchanov <arturmolchanov@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Add redirect_neigh() BPF packet redirect helper, allowing to limit stack
traversal in common container configs and improving TCP back-pressure.
Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.
Expand netlink policy support and improve policy export to user space.
(Ge)netlink core performs request validation according to declared
policies. Expand the expressiveness of those policies (min/max length
and bitmasks). Allow dumping policies for particular commands.
This is used for feature discovery by user space (instead of kernel
version parsing or trial and error).
Support IGMPv3/MLDv2 multicast listener discovery protocols in bridge.
Allow more than 255 IPv4 multicast interfaces.
Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
packets of TCPv6.
In Multi-patch TCP (MPTCP) support concurrent transmission of data
on multiple subflows in a load balancing scenario. Enhance advertising
addresses via the RM_ADDR/ADD_ADDR options.
Support SMC-Dv2 version of SMC, which enables multi-subnet deployments.
Allow more calls to same peer in RxRPC.
Support two new Controller Area Network (CAN) protocols -
CAN-FD and ISO 15765-2:2016.
Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
kernel problem.
Add TC actions for implementing MPLS L2 VPNs.
Improve nexthop code - e.g. handle various corner cases when nexthop
objects are removed from groups better, skip unnecessary notifications
and make it easier to offload nexthops into HW by converting
to a blocking notifier.
Support adding and consuming TCP header options by BPF programs,
opening the doors for easy experimental and deployment-specific
TCP option use.
Reorganize TCP congestion control (CC) initialization to simplify life
of TCP CC implemented in BPF.
Add support for shipping BPF programs with the kernel and loading them
early on boot via the User Mode Driver mechanism, hence reusing all the
user space infra we have.
Support sleepable BPF programs, initially targeting LSM and tracing.
Add bpf_d_path() helper for returning full path for given 'struct path'.
Make bpf_tail_call compatible with bpf-to-bpf calls.
Allow BPF programs to call map_update_elem on sockmaps.
Add BPF Type Format (BTF) support for type and enum discovery, as
well as support for using BTF within the kernel itself (current use
is for pretty printing structures).
Support listing and getting information about bpf_links via the bpf
syscall.
Enhance kernel interfaces around NIC firmware update. Allow specifying
overwrite mask to control if settings etc. are reset during update;
report expected max time operation may take to users; support firmware
activation without machine reboot incl. limits of how much impact
reset may have (e.g. dropping link or not).
Extend ethtool configuration interface to report IEEE-standard
counters, to limit the need for per-vendor logic in user space.
Adopt or extend devlink use for debug, monitoring, fw update
in many drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw,
mv88e6xxx, dpaa2-eth).
In mlxsw expose critical and emergency SFP module temperature alarms.
Refactor port buffer handling to make the defaults more suitable and
support setting these values explicitly via the DCBNL interface.
Add XDP support for Intel's igb driver.
Support offloading TC flower classification and filtering rules to
mscc_ocelot switches.
Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
fixed interval period pulse generator and one-step timestamping in
dpaa-eth.
Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
offload.
Add Lynx PHY/PCS MDIO module, and convert various drivers which have
this HW to use it. Convert mvpp2 to split PCS.
Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
7-port Mediatek MT7531 IP.
Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
and wcn3680 support in wcn36xx.
Improve performance for packets which don't require much offloads
on recent Mellanox NICs by 20% by making multiple packets share
a descriptor entry.
Move chelsio inline crypto drivers (for TLS and IPsec) from the crypto
subtree to drivers/net. Move MDIO drivers out of the phy directory.
Clean up a lot of W=1 warnings, reportedly the actively developed
subsections of networking drivers should now build W=1 warning free.
Make sure drivers don't use in_interrupt() to dynamically adapt their
code. Convert tasklets to use new tasklet_setup API (sadly this
conversion is not yet complete).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=bc1U
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
- Add redirect_neigh() BPF packet redirect helper, allowing to limit
stack traversal in common container configs and improving TCP
back-pressure.
Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.
- Expand netlink policy support and improve policy export to user
space. (Ge)netlink core performs request validation according to
declared policies. Expand the expressiveness of those policies
(min/max length and bitmasks). Allow dumping policies for particular
commands. This is used for feature discovery by user space (instead
of kernel version parsing or trial and error).
- Support IGMPv3/MLDv2 multicast listener discovery protocols in
bridge.
- Allow more than 255 IPv4 multicast interfaces.
- Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
packets of TCPv6.
- In Multi-patch TCP (MPTCP) support concurrent transmission of data on
multiple subflows in a load balancing scenario. Enhance advertising
addresses via the RM_ADDR/ADD_ADDR options.
- Support SMC-Dv2 version of SMC, which enables multi-subnet
deployments.
- Allow more calls to same peer in RxRPC.
- Support two new Controller Area Network (CAN) protocols - CAN-FD and
ISO 15765-2:2016.
- Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
kernel problem.
- Add TC actions for implementing MPLS L2 VPNs.
- Improve nexthop code - e.g. handle various corner cases when nexthop
objects are removed from groups better, skip unnecessary
notifications and make it easier to offload nexthops into HW by
converting to a blocking notifier.
- Support adding and consuming TCP header options by BPF programs,
opening the doors for easy experimental and deployment-specific TCP
option use.
- Reorganize TCP congestion control (CC) initialization to simplify
life of TCP CC implemented in BPF.
- Add support for shipping BPF programs with the kernel and loading
them early on boot via the User Mode Driver mechanism, hence reusing
all the user space infra we have.
- Support sleepable BPF programs, initially targeting LSM and tracing.
- Add bpf_d_path() helper for returning full path for given 'struct
path'.
- Make bpf_tail_call compatible with bpf-to-bpf calls.
- Allow BPF programs to call map_update_elem on sockmaps.
- Add BPF Type Format (BTF) support for type and enum discovery, as
well as support for using BTF within the kernel itself (current use
is for pretty printing structures).
- Support listing and getting information about bpf_links via the bpf
syscall.
- Enhance kernel interfaces around NIC firmware update. Allow
specifying overwrite mask to control if settings etc. are reset
during update; report expected max time operation may take to users;
support firmware activation without machine reboot incl. limits of
how much impact reset may have (e.g. dropping link or not).
- Extend ethtool configuration interface to report IEEE-standard
counters, to limit the need for per-vendor logic in user space.
- Adopt or extend devlink use for debug, monitoring, fw update in many
drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx,
dpaa2-eth).
- In mlxsw expose critical and emergency SFP module temperature alarms.
Refactor port buffer handling to make the defaults more suitable and
support setting these values explicitly via the DCBNL interface.
- Add XDP support for Intel's igb driver.
- Support offloading TC flower classification and filtering rules to
mscc_ocelot switches.
- Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
fixed interval period pulse generator and one-step timestamping in
dpaa-eth.
- Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
offload.
- Add Lynx PHY/PCS MDIO module, and convert various drivers which have
this HW to use it. Convert mvpp2 to split PCS.
- Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
7-port Mediatek MT7531 IP.
- Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
and wcn3680 support in wcn36xx.
- Improve performance for packets which don't require much offloads on
recent Mellanox NICs by 20% by making multiple packets share a
descriptor entry.
- Move chelsio inline crypto drivers (for TLS and IPsec) from the
crypto subtree to drivers/net. Move MDIO drivers out of the phy
directory.
- Clean up a lot of W=1 warnings, reportedly the actively developed
subsections of networking drivers should now build W=1 warning free.
- Make sure drivers don't use in_interrupt() to dynamically adapt their
code. Convert tasklets to use new tasklet_setup API (sadly this
conversion is not yet complete).
* tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits)
Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH"
net, sockmap: Don't call bpf_prog_put() on NULL pointer
bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo
bpf, sockmap: Add locking annotations to iterator
netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements
net: fix pos incrementment in ipv6_route_seq_next
net/smc: fix invalid return code in smcd_new_buf_create()
net/smc: fix valid DMBE buffer sizes
net/smc: fix use-after-free of delayed events
bpfilter: Fix build error with CONFIG_BPFILTER_UMH
cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr
net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info
bpf: Fix register equivalence tracking.
rxrpc: Fix loss of final ack on shutdown
rxrpc: Fix bundle counting for exclusive connections
netfilter: restore NF_INET_NUMHOOKS
ibmveth: Identify ingress large send packets.
ibmveth: Switch order of ibmveth_helper calls.
cxgb4: handle 4-tuple PEDIT to NAT mode translation
selftests: Add VRF route leaking tests
...
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-10-15
The main changes are:
1) Fix register equivalence tracking in verifier, from Alexei Starovoitov.
2) Fix sockmap error path to not call bpf_prog_put() with NULL, from Alex Dewar.
3) Fix sockmap to add locking annotations to iterator, from Lorenz Bauer.
4) Fix tcp_hdr_options test to use loopback address, from Martin KaFai Lau.
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Minor conflicts in net/mptcp/protocol.h and
tools/testing/selftests/net/Makefile.
In both cases code was added on both sides in the same place
so just keep both.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 1d273fcc2c.
Alexei points out there's nothing implying headers will be built
and therefore exist under usr/include, so this fix doesn't make
much sense.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If bpf_prog_inc_not_zero() fails for skb_parser, then bpf_prog_put() is
called unconditionally on skb_verdict, even though it may be NULL. Fix
and tidy up error path.
Fixes: 743df8b774 ("bpf, sockmap: Check skb_verdict and skb_parser programs explicitly")
Addresses-Coverity-ID: 1497799: Null pointer dereferences (FORWARD_NULL)
Signed-off-by: Alex Dewar <alex.dewar90@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20201012170952.60750-1-alex.dewar90@gmail.com
The sparse checker currently outputs the following warnings:
include/linux/rcupdate.h:632:9: sparse: sparse: context imbalance in 'sock_hash_seq_start' - wrong count at exit
include/linux/rcupdate.h:632:9: sparse: sparse: context imbalance in 'sock_map_seq_start' - wrong count at exit
Add the necessary __acquires and __release annotations to make the
iterator locking schema palatable to sparse. Also add __must_hold
for good measure.
The kernel codebase uses both __acquires(rcu) and __acquires(RCU).
I couldn't find any guidance which one is preferred, so I used
what is easier to type out.
Fixes: 0365351524 ("net: Allow iterating sockmap and sockhash")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20201012091850.67452-1-lmb@cloudflare.com
nftables payload statements are used to mangle SCTP headers, but they can
only replace the Internet Checksum. As a consequence, nftables rules that
mangle sport/dport/vtag in SCTP headers potentially generate packets that
are discarded by the receiver, unless the CRC-32C is "offloaded" (e.g the
rule mangles a skb having 'ip_summed' equal to 'CHECKSUM_PARTIAL'.
Fix this extending uAPI definitions and L4 checksum update function, in a
way that userspace programs (e.g. nft) can instruct the kernel to compute
CRC-32C in SCTP headers. Also ensure that LIBCRC32C is built if NF_TABLES
is 'y' or 'm' in the kernel build configuration.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 4fc427e051 ("ipv6_route_seq_next should increase position index")
tried to fix the issue where seq_file pos is not increased
if a NULL element is returned with seq_ops->next(). See bug
https://bugzilla.kernel.org/show_bug.cgi?id=206283
The commit effectively does:
- increase pos for all seq_ops->start()
- increase pos for all seq_ops->next()
For ipv6_route, increasing pos for all seq_ops->next() is correct.
But increasing pos for seq_ops->start() is not correct
since pos is used to determine how many items to skip during
seq_ops->start():
iter->skip = *pos;
seq_ops->start() just fetches the *current* pos item.
The item can be skipped only after seq_ops->show() which essentially
is the beginning of seq_ops->next().
For example, I have 7 ipv6 route entries,
root@arch-fb-vm1:~/net-next dd if=/proc/net/ipv6_route bs=4096
00000000000000000000000000000000 40 00000000000000000000000000000000 00 00000000000000000000000000000000 00000400 00000001 00000000 00000001 eth0
fe800000000000000000000000000000 40 00000000000000000000000000000000 00 00000000000000000000000000000000 00000100 00000001 00000000 00000001 eth0
00000000000000000000000000000000 00 00000000000000000000000000000000 00 00000000000000000000000000000000 ffffffff 00000001 00000000 00200200 lo
00000000000000000000000000000001 80 00000000000000000000000000000000 00 00000000000000000000000000000000 00000000 00000003 00000000 80200001 lo
fe800000000000002050e3fffebd3be8 80 00000000000000000000000000000000 00 00000000000000000000000000000000 00000000 00000002 00000000 80200001 eth0
ff000000000000000000000000000000 08 00000000000000000000000000000000 00 00000000000000000000000000000000 00000100 00000004 00000000 00000001 eth0
00000000000000000000000000000000 00 00000000000000000000000000000000 00 00000000000000000000000000000000 ffffffff 00000001 00000000 00200200 lo
0+1 records in
0+1 records out
1050 bytes (1.0 kB, 1.0 KiB) copied, 0.00707908 s, 148 kB/s
root@arch-fb-vm1:~/net-next
In the above, I specify buffer size 4096, so all records can be returned
to user space with a single trip to the kernel.
If I use buffer size 128, since each record size is 149, internally
kernel seq_read() will read 149 into its internal buffer and return the data
to user space in two read() syscalls. Then user read() syscall will trigger
next seq_ops->start(). Since the current implementation increased pos even
for seq_ops->start(), it will skip record #2, #4 and #6, assuming the first
record is #1.
root@arch-fb-vm1:~/net-next dd if=/proc/net/ipv6_route bs=128
00000000000000000000000000000000 40 00000000000000000000000000000000 00 00000000000000000000000000000000 00000400 00000001 00000000 00000001 eth0
00000000000000000000000000000000 00 00000000000000000000000000000000 00 00000000000000000000000000000000 ffffffff 00000001 00000000 00200200 lo
fe800000000000002050e3fffebd3be8 80 00000000000000000000000000000000 00 00000000000000000000000000000000 00000000 00000002 00000000 80200001 eth0
00000000000000000000000000000000 00 00000000000000000000000000000000 00 00000000000000000000000000000000 ffffffff 00000001 00000000 00200200 lo
4+1 records in
4+1 records out
600 bytes copied, 0.00127758 s, 470 kB/s
To fix the problem, create a fake pos pointer so seq_ops->start()
won't actually increase seq_file pos. With this fix, the
above `dd` command with `bs=128` will show correct result.
Fixes: 4fc427e051 ("ipv6_route_seq_next should increase position index")
Cc: Alexei Starovoitov <ast@kernel.org>
Suggested-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
smc_ism_register_dmb() returns error codes set by the ISM driver which
are not guaranteed to be negative or in the errno range. Such values
would not be handled by ERR_PTR() and finally the return code will be
used as a memory address.
Fix that by using a valid negative errno value with ERR_PTR().
Fixes: 72b7f6c487 ("net/smc: unique reason code for exceeded max dmb count")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The SMCD_DMBE_SIZES should include all valid DMBE buffer sizes, so the
correct value is 6 which means 1MB. With 7 the registration of an ISM
buffer would always fail because of the invalid size requested.
Fix that and set the value to 6.
Fixes: c6ba7c9ba4 ("net/smc: add base infrastructure for SMC-D and ISM")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a delayed event is enqueued then the event worker will send this
event the next time it is running and no other flow is currently
active. The event handler is called for the delayed event, and the
pointer to the event keeps set in lgr->delayed_event. This pointer is
cleared later in the processing by smc_llc_flow_start().
This can lead to a use-after-free condition when the processing does not
reach smc_llc_flow_start(), but frees the event because of an error
situation. Then the delayed_event pointer is still set but the event is
freed.
Fix this by always clearing the delayed event pointer when the event is
provided to the event handler for processing, and remove the code to
clear it in smc_llc_flow_start().
Fixes: 555da9af82 ("net/smc: add event-based llc_flow framework")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
IF CONFIG_BPFILTER_UMH is set, building fails:
In file included from /usr/include/sys/socket.h:33:0,
from net/bpfilter/main.c:6:
/usr/include/bits/socket.h:390:10: fatal error: asm/socket.h: No such file or directory
#include <asm/socket.h>
^~~~~~~~~~~~~~
compilation terminated.
scripts/Makefile.userprogs:43: recipe for target 'net/bpfilter/main.o' failed
make[2]: *** [net/bpfilter/main.o] Error 1
Add missing include path to fix this.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix the loss of transmission of a call's final ack when a socket gets shut
down. This means that the server will retransmit the last data packet or
send a ping ack and then get an ICMP indicating the port got closed. The
server will then view this as a failure.
Fixes: 3136ef49a1 ("rxrpc: Delay terminal ACK transmission on a client call")
Signed-off-by: David Howells <dhowells@redhat.com>
Fix rxrpc_unbundle_conn() to not drop the bundle usage count when cleaning
up an exclusive connection.
Based on the suggested fix from Hillf Danton.
Fixes: 245500d853 ("rxrpc: Rewrite the client connection manager")
Reported-by: syzbot+d57aaf84dd8a550e6d91@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Hillf Danton <hdanton@sina.com>
This definition is used by the iptables legacy UAPI, restore it.
Fixes: d3519cb89f ("netfilter: nf_tables: add inet ingress support")
Reported-by: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As per RFC4443, the destination address field for ICMPv6 error messages
is copied from the source address field of the invoking packet.
In configurations with Virtual Routing and Forwarding tables, looking up
which routing table to use for sending ICMPv6 error messages is
currently done by using the destination net_device.
If the source and destination interfaces are within separate VRFs, or
one in the global routing table and the other in a VRF, looking up the
source address of the invoking packet in the destination interface's
routing table will fail if the destination interface's routing table
contains no route to the invoking packet's source address.
One observable effect of this issue is that traceroute6 does not work in
the following cases:
- Route leaking between global routing table and VRF
- Route leaking between VRFs
Use the source device routing table when sending ICMPv6 error
messages.
[ In the context of ipv4, it has been pointed out that a similar issue
may exist with ICMP errors triggered when forwarding between network
namespaces. It would be worthwhile to investigate whether ipv6 has
similar issues, but is outside of the scope of this investigation. ]
[ Testing shows that similar issues exist with ipv6 unreachable /
fragmentation needed messages. However, investigation of this
additional failure mode is beyond this investigation's scope. ]
Link: https://tools.ietf.org/html/rfc4443
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As per RFC792, ICMP errors should be sent to the source host.
However, in configurations with Virtual Routing and Forwarding tables,
looking up which routing table to use is currently done by using the
destination net_device.
commit 9d1a6c4ea4 ("net: icmp_route_lookup should use rt dev to
determine L3 domain") changes the interface passed to
l3mdev_master_ifindex() and inet_addr_type_dev_table() from skb_in->dev
to skb_dst(skb_in)->dev. This effectively uses the destination device
rather than the source device for choosing which routing table should be
used to lookup where to send the ICMP error.
Therefore, if the source and destination interfaces are within separate
VRFs, or one in the global routing table and the other in a VRF, looking
up the source host in the destination interface's routing table will
fail if the destination interface's routing table contains no route to
the source host.
One observable effect of this issue is that traceroute does not work in
the following cases:
- Route leaking between global routing table and VRF
- Route leaking between VRFs
Preferably use the source device routing table when sending ICMP error
messages. If no source device is set, fall-back on the destination
device routing table. Else, use the main routing table (index 0).
[ It has been pointed out that a similar issue may exist with ICMP
errors triggered when forwarding between network namespaces. It would
be worthwhile to investigate, but is outside of the scope of this
investigation. ]
[ It has also been pointed out that a similar issue exists with
unreachable / fragmentation needed messages, which can be triggered by
changing the MTU of eth1 in r1 to 1400 and running:
ip netns exec h1 ping -s 1450 -Mdo -c1 172.16.2.2
Some investigation points to raw_icmp_error() and raw_err() as being
involved in this last scenario. The focus of this patch is TTL expired
ICMP messages, which go through icmp_route_lookup.
Investigation of failure modes related to raw_icmp_error() is beyond
this investigation's scope. ]
Fixes: 9d1a6c4ea4 ("net: icmp_route_lookup should use rt dev to determine L3 domain")
Link: https://tools.ietf.org/html/rfc792
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Extend nf_queue selftest to cover re-queueing, non-gso mode and
delayed queueing, from Florian Westphal.
2) Clear skb->tstamp in IPVS forwarding path, from Julian Anastasov.
3) Provide netlink extended error reporting for EEXIST case.
4) Missing VLAN offload tag and proto in log target.
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
GRE tunnel has its own header_ops, ipgre_header_ops, and sets it
conditionally. When it is set, it assumes the outer IP header is
already created before ipgre_xmit().
This is not true when we send packets through a raw packet socket,
where L2 headers are supposed to be constructed by user. Packet
socket calls dev_validate_header() to validate the header. But
GRE tunnel does not set dev->hard_header_len, so that check can
be simply bypassed, therefore uninit memory could be passed down
to ipgre_xmit(). Similar for dev->needed_headroom.
dev->hard_header_len is supposed to be the length of the header
created by dev->header_ops->create(), so it should be used whenever
header_ops is set, and dev->needed_headroom should be used when it
is not set.
Reported-and-tested-by: syzbot+4a2c52677a8a1aa283cb@syzkaller.appspotmail.com
Cc: William Tu <u9012063@gmail.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Simplify the code by using new function dev_fetch_sw_netstats().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/b6047017-8226-6b7e-a3cd-064e69fdfa27@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In several places the same code is used to populate rtnl_link_stats64
fields with data from pcpu_sw_netstats. Therefore factor out this code
to a new function dev_fetch_sw_netstats().
v2:
- constify argument netstats
- don't ignore netstats being NULL or an ERRPTR
- switch to EXPORT_SYMBOL_GPL
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/6d16a338-52f5-df69-0020-6bc771a7d498@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 109f6e39fa ("af_unix: Allow SO_PEERCRED
to work across namespaces.") introduced the old_pid variable
in unix_listen, but it's never used.
Remove the declaration and the call to put_pid.
Signed-off-by: Or Cohen <orcohen@paloaltonetworks.com>
Link: https://lore.kernel.org/r/20201011153527.18628-1-orcohen@paloaltonetworks.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
SOCK_TSTAMP_NEW (timespec64 instead of timespec) is also used for
hardware time stamps (configured via SO_TIMESTAMPING_NEW).
User space (ptp4l) first configures hardware time stamping via
SO_TIMESTAMPING_NEW which sets SOCK_TSTAMP_NEW. In the next step, ptp4l
disables SO_TIMESTAMPNS(_NEW) (software time stamps), but this must not
switch hardware time stamps back to "32 bit mode".
This problem happens on 32 bit platforms were the libc has already
switched to struct timespec64 (from SO_TIMExxx_OLD to SO_TIMExxx_NEW
socket options). ptp4l complains with "missing timestamp on transmitted
peer delay request" because the wrong format is received (and
discarded).
Fixes: 887feae36a ("socket: Add SO_TIMESTAMP[NS]_NEW")
Fixes: 783da70e83 ("net: add sock_enable_timestamps")
Signed-off-by: Christian Eggers <ceggers@arri.de>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The comparison of optname with SO_TIMESTAMPING_NEW is wrong way around,
so SOCK_TSTAMP_NEW will first be set and than reset again. Additionally
move it out of the test for SOF_TIMESTAMPING_RX_SOFTWARE as this seems
unrelated.
This problem happens on 32 bit platforms were the libc has already
switched to struct timespec64 (from SO_TIMExxx_OLD to SO_TIMExxx_NEW
socket options). ptp4l complains with "missing timestamp on transmitted
peer delay request" because the wrong format is received (and
discarded).
Fixes: 9718475e69 ("socket: Add SO_TIMESTAMPING_NEW")
Signed-off-by: Christian Eggers <ceggers@arri.de>
Reviewed-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Reviewed-by: Deepa Dinamani <deepa.kernel@gmail.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace commas with semicolons. Commas introduce unnecessary
variability in the code structure and are hard to see. What is done
is essentially described by the following Coccinelle semantic patch
(http://coccinelle.lip6.fr/):
// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/1602412498-32025-6-git-send-email-Julia.Lawall@inria.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace commas with semicolons. Commas introduce unnecessary
variability in the code structure and are hard to see. What is done
is essentially described by the following Coccinelle semantic patch
(http://coccinelle.lip6.fr/):
// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Acked-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/1602412498-32025-5-git-send-email-Julia.Lawall@inria.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace commas with semicolons. Commas introduce unnecessary
variability in the code structure and are hard to see. What is done
is essentially described by the following Coccinelle semantic patch
(http://coccinelle.lip6.fr/):
// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/1602412498-32025-4-git-send-email-Julia.Lawall@inria.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dump vlan tag and proto for the usual vlan offload case if the
NF_LOG_MACDECODE flag is set on. Without this information the logging is
misleading as there is no reference to the VLAN header.
[12716.993704] test: IN=veth0 OUT= MACSRC=86:6c:92:ea:d6:73 MACDST=0e:3b:eb:86:73:76 VPROTO=8100 VID=10 MACPROTO=0800 SRC=192.168.10.2 DST=172.217.168.163 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=2548 DF PROTO=TCP SPT=55848 DPT=80 WINDOW=501 RES=0x00 ACK FIN URGP=0
[12721.157643] test: IN=veth0 OUT= MACSRC=86:6c:92:ea:d6:73 MACDST=0e:3b:eb:86:73:76 VPROTO=8100 VID=10 MACPROTO=0806 ARP HTYPE=1 PTYPE=0x0800 OPCODE=2 MACSRC=86:6c:92:ea:d6:73 IPSRC=192.168.10.2 MACDST=0e:3b:eb:86:73:76 IPDST=192.168.10.1
Fixes: 83e96d443b ("netfilter: log: split family specific code to nf_log_{ip,ip6,common}.c files")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-----BEGIN PGP SIGNATURE-----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=udgj
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.10-2020-10-12' of git://git.kernel.dk/linux-block
Pull io_uring updates from Jens Axboe:
- Add blkcg accounting for io-wq offload (Dennis)
- A use-after-free fix for io-wq (Hillf)
- Cancelation fixes and improvements
- Use proper files_struct references for offload
- Cleanup of io_uring_get_socket() since that can now go into our own
header
- SQPOLL fixes and cleanups, and support for sharing the thread
- Improvement to how page accounting is done for registered buffers and
huge pages, accounting the real pinned state
- Series cleaning up the xarray code (Willy)
- Various cleanups, refactoring, and improvements (Pavel)
- Use raw spinlock for io-wq (Sebastian)
- Add support for ring restrictions (Stefano)
* tag 'io_uring-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (62 commits)
io_uring: keep a pointer ref_node in file_data
io_uring: refactor *files_register()'s error paths
io_uring: clean file_data access in files_register
io_uring: don't delay io_init_req() error check
io_uring: clean leftovers after splitting issue
io_uring: remove timeout.list after hrtimer cancel
io_uring: use a separate struct for timeout_remove
io_uring: improve submit_state.ios_left accounting
io_uring: simplify io_file_get()
io_uring: kill extra check in fixed io_file_get()
io_uring: clean up ->files grabbing
io_uring: don't io_prep_async_work() linked reqs
io_uring: Convert advanced XArray uses to the normal API
io_uring: Fix XArray usage in io_uring_add_task_file
io_uring: Fix use of XArray in __io_uring_files_cancel
io_uring: fix break condition for __io_uring_register() waiting
io_uring: no need to call xa_destroy() on empty xarray
io_uring: batch account ->req_issue and task struct references
io_uring: kill callback_head argument for io_req_task_work_add()
io_uring: move req preps out of io_issue_sqe()
...
Pull crypto updates from Herbert Xu:
"API:
- Allow DRBG testing through user-space af_alg
- Add tcrypt speed testing support for keyed hashes
- Add type-safe init/exit hooks for ahash
Algorithms:
- Mark arc4 as obsolete and pending for future removal
- Mark anubis, khazad, sead and tea as obsolete
- Improve boot-time xor benchmark
- Add OSCCA SM2 asymmetric cipher algorithm and use it for integrity
Drivers:
- Fixes and enhancement for XTS in caam
- Add support for XIP8001B hwrng in xiphera-trng
- Add RNG and hash support in sun8i-ce/sun8i-ss
- Allow imx-rngc to be used by kernel entropy pool
- Use crypto engine in omap-sham
- Add support for Ingenic X1830 with ingenic"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (205 commits)
X.509: Fix modular build of public_key_sm2
crypto: xor - Remove unused variable count in do_xor_speed
X.509: fix error return value on the failed path
crypto: bcm - Verify GCM/CCM key length in setkey
crypto: qat - drop input parameter from adf_enable_aer()
crypto: qat - fix function parameters descriptions
crypto: atmel-tdes - use semicolons rather than commas to separate statements
crypto: drivers - use semicolons rather than commas to separate statements
hwrng: mxc-rnga - use semicolons rather than commas to separate statements
hwrng: iproc-rng200 - use semicolons rather than commas to separate statements
hwrng: stm32 - use semicolons rather than commas to separate statements
crypto: xor - use ktime for template benchmarking
crypto: xor - defer load time benchmark to a later time
crypto: hisilicon/zip - fix the uninitalized 'curr_qm_qp_num'
crypto: hisilicon/zip - fix the return value when device is busy
crypto: hisilicon/zip - fix zero length input in GZIP decompress
crypto: hisilicon/zip - fix the uncleared debug registers
lib/mpi: Fix unused variable warnings
crypto: x86/poly1305 - Remove assignments with no effect
hwrng: npcm - modify readl to readb
...
Pull compat iovec cleanups from Al Viro:
"Christoph's series around import_iovec() and compat variant thereof"
* 'work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
security/keys: remove compat_keyctl_instantiate_key_iov
mm: remove compat_process_vm_{readv,writev}
fs: remove compat_sys_vmsplice
fs: remove the compat readv/writev syscalls
fs: remove various compat readv/writev helpers
iov_iter: transparently handle compat iovecs in import_iovec
iov_iter: refactor rw_copy_check_uvector and import_iovec
iov_iter: move rw_copy_check_uvector() into lib/iov_iter.c
compat.h: fix a spelling error in <linux/compat.h>
Pull copy_and_csum cleanups from Al Viro:
"Saner calling conventions for csum_and_copy_..._user() and friends"
[ Removing 800+ lines of code and cleaning stuff up is good - Linus ]
* 'work.csum_and_copy' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ppc: propagate the calling conventions change down to csum_partial_copy_generic()
amd64: switch csum_partial_copy_generic() to new calling conventions
sparc64: propagate the calling convention changes down to __csum_partial_copy_...()
xtensa: propagate the calling conventions change down into csum_partial_copy_generic()
mips: propagate the calling convention change down into __csum_partial_copy_..._user()
mips: __csum_partial_copy_kernel() has no users left
mips: csum_and_copy_{to,from}_user() are never called under KERNEL_DS
sparc32: propagate the calling conventions change down to __csum_partial_copy_sparc_generic()
i386: propagate the calling conventions change down to csum_partial_copy_generic()
sh: propage the calling conventions change down to csum_partial_copy_generic()
m68k: get rid of zeroing destination on error in csum_and_copy_from_user()
arm: propagate the calling convention changes down to csum_partial_copy_from_user()
alpha: propagate the calling convention changes down to csum_partial_copy.c helpers
saner calling conventions for csum_and_copy_..._user()
csum_and_copy_..._user(): pass 0xffffffff instead of 0 as initial sum
csum_partial_copy_nocheck(): drop the last argument
unify generic instances of csum_partial_copy_nocheck()
icmp_push_reply(): reorder adding the checksum up
skb_copy_and_csum_bits(): don't bother with the last argument
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-10-12
The main changes are:
1) The BPF verifier improvements to track register allocation pattern, from Alexei and Yonghong.
2) libbpf relocation support for different size load/store, from Andrii.
3) bpf_redirect_peer() helper and support for inner map array with different max_entries, from Daniel.
4) BPF support for per-cpu variables, form Hao.
5) sockmap improvements, from John.
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter/IPVS updates for net-next:
1) Inspect the reply packets coming from DR/TUN and refresh connection
state and timeout, from longguang yue and Julian Anastasov.
2) Series to add support for the inet ingress chain type in nf_tables.
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The initial support for netlink extended ACK is missing the chain update
path, which results in misleading error reporting in case of EEXIST.
Fixes 36dd1bcc07 ("netfilter: nf_tables: initial support for extended ACK reporting")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
con->out_msg must be cleared on Policy::stateful_server
(!CEPH_MSG_CONNECT_LOSSY) faults. Not doing so botches the
reconnection attempt, because after writing the banner the
messenger moves on to writing the data section of that message
(either from where it got interrupted by the connection reset or
from the beginning) instead of writing struct ceph_msg_connect.
This results in a bizarre error message because the server
sends CEPH_MSGR_TAG_BADPROTOVER but we think we wrote struct
ceph_msg_connect:
libceph: mds0 (1)172.21.15.45:6828 socket error on write
ceph: mds0 reconnect start
libceph: mds0 (1)172.21.15.45:6829 socket closed (con state OPEN)
libceph: mds0 (1)172.21.15.45:6829 protocol version mismatch, my 32 != server's 32
libceph: mds0 (1)172.21.15.45:6829 protocol version mismatch
AFAICT this bug goes back to the dawn of the kernel client.
The reason it survived for so long is that only MDS sessions
are stateful and only two MDS messages have a data section:
CEPH_MSG_CLIENT_RECONNECT (always, but reconnecting is rare)
and CEPH_MSG_CLIENT_REQUEST (only when xattrs are involved).
The connection has to get reset precisely when such message
is being sent -- in this case it was the former.
Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/47723
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
The queued con->work can start executing (and therefore logging)
before we get to this "con->work has been queued" message, making
the logs confusing. Move it up, with the meaning of "con->work
is about to be queued".
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Replace a global map->crush_workspace (protected by a global mutex)
with a list of workspaces, up to the number of CPUs + 1.
This is based on a patch from Robin Geuze <robing@nl.team.blue>.
Robin and his team have observed a 10-20% increase in IOPS on all
queue depths and lower CPU usage as well on a high-end all-NVMe
100GbE cluster.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In p9_fd_create_unix, checking is performed to see if the addr (passed
as an argument) is NULL or not.
However, no check is performed to see if addr is a valid address, i.e.,
it doesn't entirely consist of only 0's.
The initialization of sun_server.sun_path to be equal to this faulty
addr value leads to an uninitialized variable, as detected by KMSAN.
Checking for this (faulty addr) and returning a negative error number
appropriately, resolves this issue.
Link: http://lkml.kernel.org/r/20201012042404.2508-1-anant.thazhemadam@gmail.com
Reported-by: syzbot+75d51fe5bf4ebe988518@syzkaller.appspotmail.com
Tested-by: syzbot+75d51fe5bf4ebe988518@syzkaller.appspotmail.com
Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Currently, we often run with a nop parser namely one that just does
this, 'return skb->len'. This happens when either our verdict program
can handle streaming data or it is only looking at socket data such
as IP addresses and other metadata associated with the flow. The second
case is common for a L3/L4 proxy for instance.
So lets allow loading programs without the parser then we can skip
the stream parser logic and avoid having to add a BPF program that
is effectively a nop.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/160239297866.8495.13345662302749219672.stgit@john-Precision-5820-Tower
We are about to allow skb_verdict to run without skb_parser programs
as a first step change code to check each program type specifically.
This should be a mechanical change without any impact to actual result.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/160239294756.8495.5796595770890272219.stgit@john-Precision-5820-Tower
Move skb->sk assignment out of sk_psock_bpf_run() and into individual
callers. Then we can use proper skb_set_owner_r() call to assign a
sk to a skb. This improves things by also charging the truesize against
the sockets sk_rmem_alloc counter. With this done we get some accounting
in place to ensure the memory associated with skbs on the workqueue are
still being accounted for somewhere. Finally, by using skb_set_owner_r
the destructor is setup so we can just let the normal skb_kfree logic
recover the memory. Combined with previous patch dropping skb_orphan()
we now can recover from memory pressure and maintain accounting.
Note, we will charge the skbs against their originating socket even
if being redirected into another socket. Once the skb completes the
redirect op the kfree_skb will give the memory back. This is important
because if we charged the socket we are redirecting to (like it was
done before this series) the sock_writeable() test could fail because
of the skb trying to be sent is already charged against the socket.
Also TLS case is special. Here we wait until we have decided not to
simply PASS the packet up the stack. In the case where we PASS the
packet up the stack we already have an skb which is accounted for on
the TLS socket context.
For the parser case we continue to just set/clear skb->sk this is
because the skb being used here may be combined with other skbs or
turned into multiple skbs depending on the parser logic. For example
the parser could request a payload length greater than skb->len so
that the strparser needs to collect multiple skbs. At any rate
the final result will be handled in the strparser recv callback.
Fixes: 604326b41a ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/160226867513.5692.10579573214635925960.stgit@john-Precision-5820-Tower
Calling skb_orphan() is unnecessary in the strp rcv handler because the skb
is from a skb_clone() in __strp_recv. So it never has a destructor or a
sk assigned. Plus its confusing to read because it might hint to the reader
that the skb could have an sk assigned which is not true. Even if we did
have an sk assigned it would be cleaner to simply wait for the upcoming
kfree_skb().
Additionally, move the comment about strparser clone up so its closer to
the logic it is describing and add to it so that it is more complete.
Fixes: 604326b41a ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/160226865548.5692.9098315689984599579.stgit@john-Precision-5820-Tower
In the sk_skb redirect case we didn't handle the case where we overrun
the sk_rmem_alloc entry on ingress redirect or sk_wmem_alloc on egress.
Because we didn't have anything implemented we simply dropped the skb.
This meant data could be dropped if socket memory accounting was in
place.
This fixes the above dropped data case by moving the memory checks
later in the code where we actually do the send or recv. This pushes
those checks into the workqueue and allows us to return an EAGAIN error
which in turn allows us to try again later from the workqueue.
Fixes: 51199405f9 ("bpf: skb_verdict, support SK_PASS on RX BPF path")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/160226863689.5692.13861422742592309285.stgit@john-Precision-5820-Tower
The skb_set_owner_w is unnecessary here. The sendpage call will create a
fresh skb and set the owner correctly from workqueue. Its also not entirely
harmless because it consumes cycles, but also impacts resource accounting
by increasing sk_wmem_alloc. This is charging the socket we are going to
send to for the skb, but we will put it on the workqueue for some time
before this happens so we are artifically inflating sk_wmem_alloc for
this period. Further, we don't know how many skbs will be used to send the
packet or how it will be broken up when sent over the new socket so
charging it with one big sum is also not correct when the workqueue may
break it up if facing memory pressure. Seeing we don't know how/when
this is going to be sent drop the early accounting.
A later patch will do proper accounting charged on receive socket for
the case where skbs get enqueued on the workqueue.
Fixes: 604326b41a ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/160226861708.5692.17964237936462425136.stgit@john-Precision-5820-Tower
When we receive an skb and the ingress skb verdict program returns
SK_PASS we currently set the ingress flag and put it on the workqueue
so it can be turned into a sk_msg and put on the sk_msg ingress queue.
Then finally telling userspace with data_ready hook.
Here we observe that if the workqueue is empty then we can try to
convert into a sk_msg type and call data_ready directly without
bouncing through a workqueue. Its a common pattern to have a recv
verdict program for visibility that always returns SK_PASS. In this
case unless there is an ENOMEM error or we overrun the socket we
can avoid the workqueue completely only using it when we fall back
to error cases caused by memory pressure.
By doing this we eliminate another case where data may be dropped
if errors occur on memory limits in workqueue.
Fixes: 51199405f9 ("bpf: skb_verdict, support SK_PASS on RX BPF path")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/160226859704.5692.12929678876744977669.stgit@john-Precision-5820-Tower
For sk_skb case where skb_verdict program returns SK_PASS to continue to
pass packet up the stack, the memory limits were already checked before
enqueuing in skb_queue_tail from TCP side. So, lets remove the extra checks
here. The theory is if the TCP stack believes we have memory to receive
the packet then lets trust the stack and not double check the limits.
In fact the accounting here can cause a drop if sk_rmem_alloc has increased
after the stack accepted this packet, but before the duplicate check here.
And worse if this happens because TCP stack already believes the data has
been received there is no retransmit.
Fixes: 51199405f9 ("bpf: skb_verdict, support SK_PASS on RX BPF path")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/160226857664.5692.668205469388498375.stgit@john-Precision-5820-Tower
fq qdisc requires tstamp to be cleared in forwarding path
Reported-by: Evgeny B <abt-admin@mail.ru>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209427
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Fixes: 8203e2d844 ("net: clear skb->tstamp in forwarding paths")
Fixes: fb420d5d91 ("tcp/fq: move back to CLOCK_MONOTONIC")
Fixes: 80b14dee2b ("net: Add a new socket option for a future transmit time.")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Reviewed-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch adds a new ingress hook for the inet family. The inet ingress
hook emulates the IP receive path code, therefore, unclean packets are
drop before walking over the ruleset in this basechain.
This patch also introduces the nft_base_chain_netdev() helper function
to check if this hook is bound to one or more devices (through the hook
list infrastructure). This check allows to perform the same handling for
the inet ingress as it would be a netdev ingress chain from the control
plane.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch adds the NF_INET_INGRESS pseudohook for the NFPROTO_INET
family. This is a mapping this new hook to the existing NFPROTO_NETDEV
and NF_NETDEV_INGRESS hook. The hook does not guarantee that packets are
inet only, users must filter out non-ip traffic explicitly.
This infrastructure makes it easier to support this new hook in nf_tables.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Just like for MASQ, inspect the reply packets coming from DR/TUN
real servers and alter the connection's state and timeout
according to the protocol.
It's ipvs's duty to do traffic statistic if packets get hit,
no matter what mode it is.
Signed-off-by: longguang.yue <bigclouds@163.com>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The bpf_fib_lookup() helper performs a neighbour lookup for the destination
IP and returns BPF_FIB_LKUP_NO_NEIGH if this fails, with the expectation
that the BPF program will pass the packet up the stack in this case.
However, with the addition of bpf_redirect_neigh() that can be used instead
to perform the neighbour lookup, at the cost of a bit of duplicated work.
For that we still need the target ifindex, and since bpf_fib_lookup()
already has that at the time it performs the neighbour lookup, there is
really no reason why it can't just return it in any case. So let's just
always return the ifindex if the FIB lookup itself succeeds.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Link: https://lore.kernel.org/bpf/20201009184234.134214-1-toke@redhat.com
When the Extraction Frame Header contains a valid classified VLAN, use
that instead of the VLAN header present in the packet.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Recent work in f4d0525921 ("bpf: Add map_meta_equal map ops") and 134fede4ee
("bpf: Relax max_entries check for most of the inner map types") added support
for dynamic inner max elements for most map-in-map types. Exceptions were maps
like array or prog array where the map_gen_lookup() callback uses the maps'
max_entries field as a constant when emitting instructions.
We recently implemented Maglev consistent hashing into Cilium's load balancer
which uses map-in-map with an outer map being hash and inner being array holding
the Maglev backend table for each service. This has been designed this way in
order to reduce overall memory consumption given the outer hash map allows to
avoid preallocating a large, flat memory area for all services. Also, the
number of service mappings is not always known a-priori.
The use case for dynamic inner array map entries is to further reduce memory
overhead, for example, some services might just have a small number of back
ends while others could have a large number. Right now the Maglev backend table
for small and large number of backends would need to have the same inner array
map entries which adds a lot of unneeded overhead.
Dynamic inner array map entries can be realized by avoiding the inlined code
generation for their lookup. The lookup will still be efficient since it will
be calling into array_map_lookup_elem() directly and thus avoiding retpoline.
The patch adds a BPF_F_INNER_MAP flag to map creation which therefore skips
inline code generation and relaxes array_map_meta_equal() check to ignore both
maps' max_entries. This also still allows to have faster lookups for map-in-map
when BPF_F_INNER_MAP is not specified and hence dynamic max_entries not needed.
Example code generation where inner map is dynamic sized array:
# bpftool p d x i 125
int handle__sys_enter(void * ctx):
; int handle__sys_enter(void *ctx)
0: (b4) w1 = 0
; int key = 0;
1: (63) *(u32 *)(r10 -4) = r1
2: (bf) r2 = r10
;
3: (07) r2 += -4
; inner_map = bpf_map_lookup_elem(&outer_arr_dyn, &key);
4: (18) r1 = map[id:468]
6: (07) r1 += 272
7: (61) r0 = *(u32 *)(r2 +0)
8: (35) if r0 >= 0x3 goto pc+5
9: (67) r0 <<= 3
10: (0f) r0 += r1
11: (79) r0 = *(u64 *)(r0 +0)
12: (15) if r0 == 0x0 goto pc+1
13: (05) goto pc+1
14: (b7) r0 = 0
15: (b4) w6 = -1
; if (!inner_map)
16: (15) if r0 == 0x0 goto pc+6
17: (bf) r2 = r10
;
18: (07) r2 += -4
; val = bpf_map_lookup_elem(inner_map, &key);
19: (bf) r1 = r0 | No inlining but instead
20: (85) call array_map_lookup_elem#149280 | call to array_map_lookup_elem()
; return val ? *val : -1; | for inner array lookup.
21: (15) if r0 == 0x0 goto pc+1
; return val ? *val : -1;
22: (61) r6 = *(u32 *)(r0 +0)
; }
23: (bc) w0 = w6
24: (95) exit
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201010234006.7075-4-daniel@iogearbox.net
Add an efficient ingress to ingress netns switch that can be used out of tc BPF
programs in order to redirect traffic from host ns ingress into a container
veth device ingress without having to go via CPU backlog queue [0]. For local
containers this can also be utilized and path via CPU backlog queue only needs
to be taken once, not twice. On a high level this borrows from ipvlan which does
similar switch in __netif_receive_skb_core() and then iterates via another_round.
This helps to reduce latency for mentioned use cases.
Pod to remote pod with redirect(), TCP_RR [1]:
# percpu_netperf 10.217.1.33
RT_LATENCY: 122.450 (per CPU: 122.666 122.401 122.333 122.401 )
MEAN_LATENCY: 121.210 (per CPU: 121.100 121.260 121.320 121.160 )
STDDEV_LATENCY: 120.040 (per CPU: 119.420 119.910 125.460 115.370 )
MIN_LATENCY: 46.500 (per CPU: 47.000 47.000 47.000 45.000 )
P50_LATENCY: 118.500 (per CPU: 118.000 119.000 118.000 119.000 )
P90_LATENCY: 127.500 (per CPU: 127.000 128.000 127.000 128.000 )
P99_LATENCY: 130.750 (per CPU: 131.000 131.000 129.000 132.000 )
TRANSACTION_RATE: 32666.400 (per CPU: 8152.200 8169.842 8174.439 8169.897 )
Pod to remote pod with redirect_peer(), TCP_RR:
# percpu_netperf 10.217.1.33
RT_LATENCY: 44.449 (per CPU: 43.767 43.127 45.279 45.622 )
MEAN_LATENCY: 45.065 (per CPU: 44.030 45.530 45.190 45.510 )
STDDEV_LATENCY: 84.823 (per CPU: 66.770 97.290 84.380 90.850 )
MIN_LATENCY: 33.500 (per CPU: 33.000 33.000 34.000 34.000 )
P50_LATENCY: 43.250 (per CPU: 43.000 43.000 43.000 44.000 )
P90_LATENCY: 46.750 (per CPU: 46.000 47.000 47.000 47.000 )
P99_LATENCY: 52.750 (per CPU: 51.000 54.000 53.000 53.000 )
TRANSACTION_RATE: 90039.500 (per CPU: 22848.186 23187.089 22085.077 21919.130 )
[0] https://linuxplumbersconf.org/event/7/contributions/674/attachments/568/1002/plumbers_2020_cilium_load_balancer.pdf
[1] https://github.com/borkmann/netperf_scripts/blob/master/percpu_netperf
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201010234006.7075-3-daniel@iogearbox.net
Tobias reported regressions in IPsec tests following the patch
referenced by the Fixes tag below. The root cause is dropping the
reset of the flowi4_oif after the fib_lookup. Apparently it is
needed for xfrm cases, so restore the oif update to ip_route_output_flow
right before the call to xfrm_lookup_route.
Fixes: 2fbc6e89b2 ("ipv4: Update exception handling for multipath routes via same device")
Reported-by: Tobias Brunner <tobias@strongswan.org>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The msk can close MP_JOIN subflows if the initial handshake
fails. Currently such subflows are kept alive in the
conn_list until the msk itself is closed.
Beyond the wasted memory, we could end-up sending the
DATA_FIN and the DATA_FIN ack on such socket, even after a
reset.
Fixes: 43b54c6ee3 ("mptcp: Use full MPTCP-level disconnect state machine")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Additional/MP_JOIN subflows that do not pass some initial handshake
tests currently causes fallback to TCP. That is an RFC violation:
we should instead reset the subflow and leave the the msk untouched.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/91
Fixes: f296234c98 ("mptcp: Add handling of incoming MP_JOIN requests")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For older versions of gcc, the array = {0}; will cause warnings:
net/smc/smc_llc.c: In function 'smc_llc_send_link_delete_all':
net/smc/smc_llc.c:1317:9: warning: missing braces around initializer [-Wmissing-braces]
struct smc_llc_msg_del_link delllc = {0};
^
net/smc/smc_llc.c:1317:9: warning: (near initialization for 'delllc.hd') [-Wmissing-braces]
1 warnings generated
Fixes: f3811fd7bc ("net/smc: send DELETE_LINK, ALL message and wait for send to complete")
Signed-off-by: Pujin Shi <shipujin.t@gmail.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEK3kIWJt9yTYMP3ehqclaivrt76kFAl9/hIITHG1rbEBwZW5n
dXRyb25peC5kZQAKCRCpyVqK+u3vqSUNB/9NiVYEPFF2mkNKzHAkhOssFF2NIzo8
0LBsV/YbOFqxSW0nYg0BB2nIdfIIdR+yqBW3ishbvizAWUOzSVvGD03oG0pZkKaZ
eMhh+OQ5fBjIjkNYXHC870uUZyJ7FzcyFLpeNoJfrGVuAtTpQts2TwWwevArPhfk
4XswX7DQ5npLwTGWBIvL8a6zYAmjEtT5Fnds0oeGeLfepWePG0ih/uxLN65JTrTU
uHt5gSgJLflXF+swErnLosMr1ADy2I+Zsg3XlYp89A9xLy5IEh0vyQPxEl69Wu1x
gQgO7L675YRwO9EyVkIfkYUzd/ot3o+virHTN470unu5QCb6O+04nof1
=omsQ
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-5.9-20201008' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
====================
linux-can-fixes-for-5.9-20201008
The first patch is by Lucas Stach and fixes m_can driver by removing an
erroneous call to m_can_class_suspend() in runtime suspend. Which causes the
pinctrl state to get stuck on the "sleep" state, which breaks all CAN
functionality on SoCs where this state is defined.
The last two patches target the j1939 protocol: Cong Wang fixes a syzbot
finding of an uninitialized variable in the j1939 transport protocol. I
contribute a patch, that fixes the initialization of a same uninitialized
variable in a different function.
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* fixes for the recent S1G work
* a docbook build time improvement
* API to pass beacon rate to lower-level driver
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEH1e1rEeCd0AIMq6MB8qZga/fl8QFAl9+7MQACgkQB8qZga/f
l8SOqw/8Cr0/QTy2DMNGZwsIcNgLjYvgKckZFWFhyyJtYnFHUa+VX1fVO07xoQpG
PWgHnDRR39rm6ZJt0n61h0C5wxwibggU8oGBNV3cYRDTwefR/WPWJ9UJs9NSVKA+
PJQt9iqKGneEq3KjISaKvWLFdWUHePorOVyZr8tLYlerGma17kLG6nunB7gg6CCn
VSQrnVyeF7oEs7agkFtdaPpIQ2ieTxD9Xl2p2y3bMFRLVJopaBGHrWaGq1e7UKme
c5W9cIwOxIvieqcn03/lkwS5KEaG5OXqL+pL1zJiN69OWpjp3X4DFMP8f7xTrmFj
xK9SRTnR7CU3yvlfSQuNJgJn4+2zussn+VgzY5sDBW3FPAFy0NNvlA5vVnZgPJ61
AkfE8wNiaVAPLA8ckxN6VV9CiV1JDx5w2FrnCPhA7weX0l3PpAaojA5xG6HCDEHx
LfNr9NbRLiTZdz8YkDEUU+GCCfnYBAbYXO/lMQK56L2T+HOu3yVE9nYuUQNRCCkK
gDr9biOYrWpYC1r3mD+i+0guaH3ZRpO/skoD0So25YxCP+j/AkDJXSjflTkaU9P2
XmgXxjxVX8JFrg29XciiGW6a4TOWS3caMvwxb0PlzfPaNREuglH3ygFHVnWsAt2G
GZIgc3OggRdUIK4zoX3jsZQAgDK4B9ym70zujSY7JdIamxaHmO4=
=TrMG
-----END PGP SIGNATURE-----
Merge tag 'mac80211-next-for-net-next-2020-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
A handful of changes:
* fixes for the recent S1G work
* a docbook build time improvement
* API to pass beacon rate to lower-level driver
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new attribute NLMSGERR_ATTR_POLICY to the extended ACK
to advertise the policy, e.g. if an attribute was out of range,
you'll know the range that's permissible.
Add new NL_SET_ERR_MSG_ATTR_POL() and NL_SET_ERR_MSG_ATTR_POL()
macros to set this, since realistically it's only useful to do
this when the bad attribute (offset) is also returned.
Use it in lib/nlattr.c which practically does all the policy
validation.
v2:
- add and use netlink_policy_dump_attr_size_estimate()
v3:
- remove redundant break
v4:
- really remove redundant break ... sorry
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refactor the per-attribute policy writing into a new
helper function, to be used later for dumping out the
policy of a rejected attribute.
v2:
- fix some indentation
v3:
- change variable order in netlink_policy_dump_write()
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
skb_unshare() drops a reference count on the old skb unconditionally,
so in the failure case, we end up freeing the skb twice here.
And because the skb is allocated in fclone and cloned by caller
tipc_msg_reassemble(), the consequence is actually freeing the
original skb too, thus triggered the UAF by syzbot.
Fix this by replacing this skb_unshare() with skb_cloned()+skb_copy().
Fixes: ff48b6222e ("tipc: use skb_unshare() instead in tipc_buf_append()")
Reported-and-tested-by: syzbot+e96a7ba46281824cc46a@syzkaller.appspotmail.com
Cc: Jon Maloy <jmaloy@redhat.com>
Cc: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Field ini->smcd_version is set to SMC_V2 before calling
smc_listen_ism_init(). This clears the V1 bit that may be set. When all
matching ISM V2 devices fail to initialize then the smcd_version field
needs to get restored to allow any possible V1 devices to initialize.
And be consistent, always go to the not_found label when no device was
found.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
coccinelle informs about
net/smc/af_smc.c:1770:10-11: WARNING: opportunity for kzfree/kvfree_sensitive
Its not that kzfree() would help here, the memset() is done to prepare
the buffer for another socket receive.
Fix that warning message by reordering the calls, while at it eliminate
the unneeded variable cclc2 and use sizeof(*buf) as above in the same
function. No functional changes.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Static code checkers warn of inconsistent returns because the lgr mutex
is locked in one function and unlocked in a function called by the
locking function:
net/smc/af_smc.c:823 smc_connect_rdma() warn: inconsistent returns 'smc_client_lgr_pending'.
net/smc/af_smc.c:897 smc_connect_ism() warn: inconsistent returns 'smc_server_lgr_pending'.
Make the code consistent by doing the unlock in the same function that
fetches the lock. No functional changes.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEK3kIWJt9yTYMP3ehqclaivrt76kFAl9+MLsTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRCpyVqK+u3vqScfCACBLbt8heMyVQQYd130/oIAvQ2o8Bjf
DPa36CVMYOGH1KOCnEyuc+oKsXeJfy33Faxe3+s7q2aMkddH7zhHQNiohPgwWAsM
AuAjRgbAVkDd9BTAbOS/cujftZBBccGRUuusbCg7lsBdwhGQbCggfYbOmGt2B8Gv
Wt3s2td8i90WutFb3UN3ec5N44jTn+WQvuOjX0Dzt/qi3r5qyC5JvcdkW3LAfxEG
X7bJ6cf8HRgUyPAALJGdoWdKT+ImmFbUJc8WuX9PdlYzxR+FyPKQgxD187ARTeLA
OqQSMHi4jRNywei0WUg5YoR0qPAHWKOLIMBK45TWNfa0p2+JzRbxTf3o
=7UL+
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-5.10-20201007' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
linux-can-next-for-5.10-20201007
The first 3 patches are by me and fix several warnings found
when compiling the kernel with W=1.
Lukas Bulwahn's patch adjusts the MAINTAINERS file, to accommodate
the renaming of the mcp251xfd driver.
Vincent Mailhol contributes 3 patches for the CAN networking layer.
First error queue support is added the the CAN RAW protocol.
The second patch converts the get_can_dlc() and get_canfd_dlc()
in-Kernel-only macros from using __u8 to u8.
The third patch adds a helper function to calculate the length of
one bit in in multiple of time quanta.
Oliver Hartkopp's patch add support for the ISO 15765-2:2016
transport protocol to the CAN stack.
Three patches by Lad Prabhakar add documentation for various
new rcar controllers to the device tree bindings of the rcar_can
and rcan_canfd driver.
Michael Walle's patch adds various processors to the flexcan
driver binding documentation.
The next two patches are by me and target the flexcan driver aswell.
The remove the ack_grp and ack_bit from the fsl,stop-mode DT property
and the driver, as they are not used anymore. As these are the last
two arguments this change will not break existing device trees.
The last three patches are by Srinivas Neeli and target
the xilinx_can driver.
The first one increases the lower limit for the bit rate
prescaler to 2, the other two fix sparse and coverity findings.
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
At first when sendpage gets called, if there is more data, 'more' in
tls_push_data() gets set which later sets pending_open_record_frags, but
when there is no more data in file left, and last time tls_push_data()
gets called, pending_open_record_frags doesn't get reset. And later when
2 bytes of encrypted alert comes as sendmsg, it first checks for
pending_open_record_frags, and since this is set, it creates a record with
0 data bytes to encrypt, meaning record length is prepend_size + tag_size
only, which causes problem.
We should set/reset pending_open_record_frags based on more bit.
Fixes: e8f6979981 ("net/tls: Add generic NIC offload infrastructure")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a ICMPV6_PKT_TOOBIG report a next-hop MTU that is less than the IPv6
minimum link MTU, the estimated path MTU is reduced to the minimum link
MTU. This behaviour breaks TAHI IPv6 Core Conformance Test v6LC4.1.6:
Packet Too Big Less than IPv6 MTU.
Referring to RFC 8201 section 4: "If a node receives a Packet Too Big
message reporting a next-hop MTU that is less than the IPv6 minimum link
MTU, it must discard it. A node must not reduce its estimate of the Path
MTU below the IPv6 minimum link MTU on receipt of a Packet Too Big
message."
Drop the path MTU update if reported MTU is less than the minimum link MTU.
Signed-off-by: Georg Kohmann <geokohma@cisco.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RDS/IB tries to refill the recv buffer in softirq context using
GFP_NOWAIT flag. However alloc failure is handled by queueing a work to
refill the recv buffer with GFP_KERNEL flag. This means failure to
allocate with GFP_NOWAIT isn't fatal. Do not print the PAF warnings if
softirq context fails to refill the recv buffer. We will see the PAF
warnings when worker also fails to allocate.
Signed-off-by: Manjunath Patil <manjunath.b.patil@oracle.com>
Reviewed-by: Aruna Ramakrishna <aruna.ramakrishna@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The enable_remote_dev_reset devlink param flags that the host admin
allows device resets that can be initiated by other hosts. This
parameter is useful for setups where a device is shared by different
hosts, such as multi-host setup. Once the user set this parameter to
false, the driver should NACK any attempt to reset the device while the
driver is loaded.
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add remote reload stats to hold the history of actions performed due
devlink reload commands initiated by remote host. For example, in case
firmware activation with reset finished successfully but was initiated
by remote host.
The function devlink_remote_reload_actions_performed() is exported to
enable drivers update on remote reload actions performed as it was not
initiated by their own devlink instance.
Expose devlink remote reload stats to the user through devlink dev get
command.
Examples:
$ devlink dev show
pci/0000:82:00.0:
stats:
reload:
driver_reinit 2 fw_activate 1 fw_activate_no_reset 0
remote_reload:
driver_reinit 0 fw_activate 0 fw_activate_no_reset 0
pci/0000:82:00.1:
stats:
reload:
driver_reinit 1 fw_activate 0 fw_activate_no_reset 0
remote_reload:
driver_reinit 1 fw_activate 1 fw_activate_no_reset 0
$ devlink dev show -jp
{
"dev": {
"pci/0000:82:00.0": {
"stats": {
"reload": {
"driver_reinit": 2,
"fw_activate": 1,
"fw_activate_no_reset": 0
},
"remote_reload": {
"driver_reinit": 0,
"fw_activate": 0,
"fw_activate_no_reset": 0
}
}
},
"pci/0000:82:00.1": {
"stats": {
"reload": {
"driver_reinit": 1,
"fw_activate": 0,
"fw_activate_no_reset": 0
},
"remote_reload": {
"driver_reinit": 1,
"fw_activate": 1,
"fw_activate_no_reset": 0
}
}
}
}
}
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add reload stats to hold the history per reload action type and limit.
For example, the number of times fw_activate has been performed on this
device since the driver module was added or if the firmware activation
was performed with or without reset.
Add devlink notification on stats update.
Expose devlink reload stats to the user through devlink dev get command.
Examples:
$ devlink dev show
pci/0000:82:00.0:
stats:
reload:
driver_reinit 2 fw_activate 1 fw_activate_no_reset 0
pci/0000:82:00.1:
stats:
reload:
driver_reinit 1 fw_activate 0 fw_activate_no_reset 0
$ devlink dev show -jp
{
"dev": {
"pci/0000:82:00.0": {
"stats": {
"reload": {
"driver_reinit": 2,
"fw_activate": 1,
"fw_activate_no_reset": 0
}
}
},
"pci/0000:82:00.1": {
"stats": {
"reload": {
"driver_reinit": 1,
"fw_activate": 0,
"fw_activate_no_reset": 0
}
}
}
}
}
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add reload limit to demand restrictions on reload actions.
Reload limits supported:
no_reset: No reset allowed, no down time allowed, no link flap and no
configuration is lost.
By default reload limit is unspecified and so no constraints on reload
actions are required.
Some combinations of action and limit are invalid. For example, driver
can not reinitialize its entities without any downtime.
The no_reset reload limit will have usecase in this patchset to
implement restricted fw_activate on mlx5.
Have the uapi parameter of reload limit ready for future support of
multiselection.
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add devlink reload action to allow the user to request a specific reload
action. The action parameter is optional, if not specified then devlink
driver re-init action is used (backward compatible).
Note that when required to do firmware activation some drivers may need
to reload the driver. On the other hand some drivers may need to reset
the firmware to reinitialize the driver entities. Therefore, the devlink
reload command returns the actions which were actually performed.
Reload actions supported are:
driver_reinit: driver entities re-initialization, applying devlink-param
and devlink-resource values.
fw_activate: firmware activate.
command examples:
$devlink dev reload pci/0000:82:00.0 action driver_reinit
reload_actions_performed:
driver_reinit
$devlink dev reload pci/0000:82:00.0 action fw_activate
reload_actions_performed:
driver_reinit fw_activate
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change devlink_reload_supported() function to get devlink_ops pointer
param instead of devlink pointer param.
This change will be used in the next patch to check if devlink reload is
supported before devlink instance is allocated.
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
using packetdrill it's possible to observe the same MPTCP DSN being acked
by different subflows with DACK4 and DACK8. This is in contrast with what
specified in RFC8684 §3.3.2: if an MPTCP endpoint transmits a 64-bit wide
DSN, it MUST be acknowledged with a 64-bit wide DACK. Fix 'use_64bit_ack'
variable to make it a property of MPTCP sockets, not TCP subflows.
Fixes: a0c1d0eafd ("mptcp: Use 32-bit DATA_ACK when possible")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
kmalloc() of sufficiently big portion of memory is cache-aligned
in regular conditions. If some debugging options are used,
there is no reason qdisc structures would need 64-byte alignment
if most other kernel structures are not aligned.
This get rid of QDISC_ALIGN and QDISC_ALIGNTO.
Addition of privdata field will help implementing
the reverse of qdisc_priv() and documents where
the private data is.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Allen Pais <allen.lkml@gmail.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce one cache line worth of padding between the producer and
consumer pointers in all the lockless rings. This so that the HW
adjacency prefetcher will not prefetch the consumer pointer when the
producer pointer is used and vice versa. This improves throughput
performance for the l2fwd sample app with 2% on my machine with HW
prefetching turned on.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/1602166338-21378-1-git-send-email-magnus.karlsson@gmail.com
As Nicolas noticed in his case, when xfrm_interface module is installed
the standard IP tunnels will break in receiving packets.
This is caused by the IP tunnel handlers with a higher priority in xfrm
interface processing incoming packets by xfrm_input(), which would drop
the packets and return 0 instead when anything wrong happens.
Rather than changing xfrm_input(), this patch is to adjust the priority
for the IP tunnel handlers in xfrm interface, so that the packets would
go to xfrmi's later than the others', as the others' would not drop the
packets when the handlers couldn't process them.
Note that IPCOMP also defines its own IPIP tunnel handler and it calls
xfrm_input() as well, so we must make its priority lower than xfrmi's,
which means having xfrmi loaded would still break IPCOMP. We may seek
another way to fix it in xfrm_input() in the future.
Reported-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Tested-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Fixes: da9bbf0598 ("xfrm: interface: support IPIP and IPIP6 tunnels processing with .cb_handler")
FIxes: d7b360c286 ("xfrm: interface: support IP6IP6 and IP6IP tunnels processing with .cb_handler")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Fix follow warnings:
[net/9p/trans_xen.c:454]: (warning) %u in format string (no. 1) requires
'unsigned int' but the argument type is 'int'.
[net/9p/trans_xen.c:460]: (warning) %u in format string (no. 1) requires
'unsigned int' but the argument type is 'int'.
Link: http://lkml.kernel.org/r/20201009080552.89918-1-yebin10@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
If recvmsg() and the workqueue race to dequeue the data
pending on some subflow, the current mapping for such
subflow covers several skbs and some of them have not
reached yet the received, either the worker or recvmsg()
can find a subflow with the data_avail flag set - since
the current mapping is valid and in sequence - but no
skbs in the receive queue - since the other entity just
processed them.
The above will lead to an unbounded loop in __mptcp_move_skbs()
and a subsequent hang of any task trying to acquiring the msk
socket lock.
This change addresses the issue stopping the __mptcp_move_skbs()
loop as soon as we detect the above race (empty receive queue
with data_avail set).
Reported-and-tested-by: syzbot+fcf8ca5817d6e92c6567@syzkaller.appspotmail.com
Fixes: ab174ad8ef ("mptcp: move ooo skbs into msk out of order queue.")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This accidentally got wired up to the *get* policy instead
of the *set* policy, causing operations to be rejected. Fix
it by wiring up the correct policy instead.
Fixes: 5028588b62 ("ethtool: wire up set policies to ops")
Reported-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Tested-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ETHTOOL_A_STRSET_COUNTS_ONLY flag attribute was previously
not allowed to be used, but now due to the policy size reduction
we would access the tb[] array out of bounds since we tried to
check for the attribute despite it not being accepted.
Fix both issues by adding it correctly to the appropriate policy.
Fixes: ff419afa43 ("ethtool: trim policy tables")
Fixes: 71921690f9 ("ethtool: provide string sets with STRSET_GET request")
Reported-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Tested-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Small conflict around locking in rxrpc_process_event() -
channel_lock moved to bundle in next, while state lock
needs _bh() from net.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch add the initialization of skbcnt, similar to:
e009f95b15 can: j1935: j1939_tp_tx_dat_new(): fix missing initialization of skbcnt
Let's play save and initialize this skbcnt as well.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This fixes an uninit-value warning:
BUG: KMSAN: uninit-value in can_receive+0x26b/0x630 net/can/af_can.c:650
Reported-and-tested-by: syzbot+3f3837e61a48d32b495f@syzkaller.appspotmail.com
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Cc: Robin van der Gracht <robin@protonic.nl>
Cc: Oleksij Rempel <linux@rempel-privat.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://lore.kernel.org/r/20201008061821.24663-1-xiyou.wangcong@gmail.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
With multiple DNAT rules it's possible that after destination
translation the resulting tuples collide.
For example, two openvswitch flows:
nw_dst=10.0.0.10,tp_dst=10, actions=ct(commit,table=2,nat(dst=20.0.0.1:20))
nw_dst=10.0.0.20,tp_dst=10, actions=ct(commit,table=2,nat(dst=20.0.0.1:20))
Assuming two TCP clients initiating the following connections:
10.0.0.10:5000->10.0.0.10:10
10.0.0.10:5000->10.0.0.20:10
Both tuples would translate to 10.0.0.10:5000->20.0.0.1:20 causing
nf_conntrack_confirm() to fail because of tuple collision.
Netfilter handles this case by allocating a null binding for SNAT at
egress by default. Perform the same operation in openvswitch for DNAT
if no explicit SNAT is requested by the user and allocate a null binding
for SNAT for packets in the "original" direction.
Reported-at: https://bugzilla.redhat.com/1877128
Suggested-by: Florian Westphal <fw@strlen.de>
Fixes: 05752523e5 ("openvswitch: Interface with NAT.")
Signed-off-by: Dumitru Ceara <dceara@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf 2020-10-08
The main changes are:
1) Fix "unresolved symbol" build error under CONFIG_NET w/o CONFIG_INET due
to missing tcp_timewait_sock and inet_timewait_sock BTF, from Yonghong Song.
2) Fix 32 bit sub-register bounds tracking for OR case, from Daniel Borkmann.
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit is correcting NETLINK br_fill_ifinfo() to be able to
handle 'filter_mask' with multiple flags asserted.
Fixes: 36a8e8e265 ("bridge: Extend br_fill_ifinfo to return MPR status")
Signed-off-by: Henrik Bjoernlund <henrik.bjoernlund@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Suggested-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The user is allowed to change beacon tx rate (HT/VHT/HE) from hostapd.
This information needs to be passed to the driver when the rate control
is offloaded to the firmware. The driver capability of allowing beacon
rate is already validated in cfg80211, so simply passing the rate
information to the driver is enough.
Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
Link: https://lore.kernel.org/r/1601762658-15627-1-git-send-email-rmanohar@codeaurora.org
[adjust commit message slightly]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
last_rate is initialized to zero by sta_info_alloc(), but
this indicates legacy bitrate for the last TX rate (and
invalid for the last RX rate). To avoid a warning when
decoding the last rate as legacy (before a data frame
has been sent), initialize them as S1G MCS.
Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20201005164522.18069-2-thomas@adapt-ip.com
[rename to ieee80211_s1g_sta_rate_init(), seems more appropriate]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Even though a driver or mac80211 shouldn't produce a
legacy bitrate if sband->bitrates doesn't exist, don't
crash if that is the case either.
This fixes a kernel panic if station dump is run before
last_rate can be updated with a data frame when
sband->bitrates is missing (eg. in S1G bands).
Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20201005164522.18069-1-thomas@adapt-ip.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
CAN Transport Protocols offer support for segmented Point-to-Point
communication between CAN nodes via two defined CAN Identifiers.
As CAN frames can only transport a small amount of data bytes
(max. 8 bytes for 'classic' CAN and max. 64 bytes for CAN FD) this
segmentation is needed to transport longer PDUs as needed e.g. for
vehicle diagnosis (UDS, ISO 14229) or IP-over-CAN traffic.
This protocol driver implements data transfers according to
ISO 15765-2:2016 for 'classic' CAN and CAN FD frame types.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/r/20200928200404.82229-1-socketcan@hartkopp.net
[mkl: Removed "WITH Linux-syscall-note" from isotp.c.
Fixed indention, a checkpatch warning and typos.
Replaced __u{8,32} by u{8,32}.
Removed always false (optlen < 0) check in isotp_setsockopt().]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
For now, this function simply aligns the data at the beginning of the
pages. This can eventually be expanded to shift data to the correct
offsets when we're ready.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This patch adds the ability to "read a hole" into a set of XDR data
pages by taking the following steps:
1) Shift all data after the current xdr->p to the right, possibly into
the tail,
2) Zero the specified range, and
3) Update xdr->p to point beyond the hole.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
xdr_shrink_pagelen() is very similar to what we need for hole expansion,
so split out the common code into its own function that can be used by
both functions.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
I don't need the entire align pages code for READ_PLUS, so split out the
part I do need so I don't need to reimplement anything.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
I'll need this for READ_PLUS to help figure out the offset where page
data is stored at, but it might also be useful for other things.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
I'm going to need this bit of code in a few places for READ_PLUS
decoding, so let's make it a helper function.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Error queue are not yet implemented in CAN-raw sockets.
The problem: a userland call to recvmsg(soc, msg, MSG_ERRQUEUE) on a
CAN-raw socket would unqueue messages from the normal queue without
any kind of error or warning. As such, it prevented CAN drivers from
using the functionalities that relies on the error queue such as
skb_tx_timestamp().
SCM_CAN_RAW_ERRQUEUE is defined as the type for the CAN raw error
queue. SCM stands for "Socket control messages". The name is inspired
from SCM_J1939_ERRQUEUE of include/uapi/linux/can/j1939.h.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/r/20200926162527.270030-1-mailhol.vincent@wanadoo.fr
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch fixes the kernel doc for can_rcv_list_find() which was broken in commit:
3ee6d2bebe ("can: af_can: rename find_rcv_list() to can_rcv_list_find()")
while renaming a variable, but forgetting to rename the kernel doc, too.
Link: http://lore.kernel.org/r/20201006203748.1750156-2-mkl@pengutronix.de
Fixes: 3ee6d2bebe ("can: af_can: rename find_rcv_list() to can_rcv_list_find()")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Perform header flags validation through the policy.
Only pause command supports ETHTOOL_FLAG_STATS. Create a separate
policy to be able to express that in policy dumps to user space.
Note that even though the core will validate the header policy,
it cannot record multiple layers of attributes and we have to
re-parse header sub-attrs. When doing so we could skip attribute
validation, or use most permissive policy. Opt for the former.
We will no longer return the extack cookie for flags but since
we only added first new flag in this release it's not expected
that any user space had a chance to make use of it.
v2: - remove the re-validation in ethnl_parse_header_dev_get()
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We don't have good validation policy for existing unsigned int attrs
which serve as flags (for new ones we could use NLA_BITFIELD32).
With increased use of policy dumping having the validation be
expressed as part of the policy is important. Add validation
policy in form of a mask of supported/valid bits.
Support u64 in the uAPI to be future-proof, but really for now
the embedded mask member can only hold 32 bits, so anything with
bit 32+ set will always fail validation.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
To get the most out of parsing by the core, and to allow dumping
full policies we need to specify which policy applies to nested
attrs. For headers it's ethnl_header_policy.
$ sed -i 's@\(ETHTOOL_A_.*HEADER\].*=\) { .type = NLA_NESTED },@\1\n\t\tNLA_POLICY_NESTED(ethnl_header_policy),@' net/ethtool/*
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since ethtool uses strict attribute validation there's no need
to initialize all attributes in policy tables. 0 is NLA_UNSPEC
which is going to be rejected. Remove the NLA_REJECTs.
Similarly attributes above maxattrs are rejected, so there's
no need to always size the policy tables to ETHTOOL_A_..._MAX.
v2: - new patch
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similarly to get commands wire up the policies of set commands
to get parsing by the core and policy dumps.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wire up policies for get commands in struct nla_policy of the ethtool
family. Make use of genetlink code attr validation and parsing, as well
as allow dumping policies to user space.
For every ETHTOOL_MSG_*_GET:
- add 'ethnl_' prefix to policy name
- add extern declaration in net/ethtool/netlink.h
- wire up the policy & attr in ethtool_genl_ops[].
- remove .request_policy and .max_attr from ethnl_request_ops.
Obviously core only records the first "layer" of parsed attrs
so we still need to parse the sub-attrs of the nested header
attribute.
v2:
- merge of patches 1 and 2 from v1
- remove stray empty lines in ops
- also remove .max_attr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
use new helper for netstats settings
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEqG5UsNXhtOCrfGQP+7dXa6fLC2sFAl97RWEACgkQ+7dXa6fL
C2sxNBAAhr1dnVfGHAV7mUVAv8BtNwY6B+mczIo48k53oiy0+Ngh83yrcdt2EkmY
s3JdbWq1rVlCps6zOOefKYfXG8FS2guFVDjKl9SaC6nYmxdEPnRmbW9mlhiFg/Na
xLnYVcJnuHw2ymisaRkARQn4w6F4CfEYBI9pbRpiw2d7vfD+Rziu49JMqVbTc2mF
g8tY0KPt81TouPlc//5BrY0dFat06gRbBsYcLmL/x/9aNofWg6F8dse9Evixgl3y
sY+ZwQkIxipYVyfuS9Z2UVhFTcYSvbTKWgvE08f9AK7iO6Y35hI4HIkZckIepgU0
rRNZY5AAq6Qb/kbGwIN27GDD/Ef8SqrW5NFdyRQykr8h1DIxGi5BlWRpVcpH1d9x
JI4fAp9dAcySOtusETrOBMvczz9wxB1HSe0tmrUP3lx0DLA484zdR8M+rQNPcEOK
M/x83hmIkMnmd3dH/eVNx0OwA35KVQ/eW79QsfDhnG2JVms4jwzqe/QfGpwXl2q9
SYNrlJZe6HjypNdWwMPZLswKzKe+7v9zKxY69TvsdKmqycQf2hVwsIxRmAr1GHEc
dQX3ag+LzS8elgqWRZ/NC4y8ojUgO73BhgL1DCrSgvu1UIzMC9bNSxrsdN+d3VSt
ZKzaFGQ9E9GDGSvfVJt/yRAb7kjQdeXchowWSGg804fPEzlGmds=
=dmWc
-----END PGP SIGNATURE-----
Merge tag 'rxrpc-fixes-20201005' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc: Miscellaneous fixes
Here are some miscellaneous rxrpc fixes:
(1) Fix the xdr encoding of the contents read from an rxrpc key.
(2) Fix a BUG() for a unsupported encoding type.
(3) Fix missing _bh lock annotations.
(4) Fix acceptance handling for an incoming call where the incoming call
is encrypted.
(5) The server token keyring isn't network namespaced - it belongs to the
server, so there's no need. Namespacing it means that request_key()
fails to find it.
(6) Fix a leak of the server keyring.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Define get/set phy tunable callbacks in ethtool ops.
This will allow MAC drivers with integrated PHY still to implement
these tunables.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently skb_dump has a restriction to only dump full packet for the
first 5 socket buffers, then only headers will be printed. Remove this
arbitrary and confusing restriction, which is only documented vaguely
("up to") in the comments above the prototype.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We got reports from GKE customers flows being reset by netfilter
conntrack unless nf_conntrack_tcp_be_liberal is set to 1.
Traces seemed to suggest ACK packet being dropped by the
packet capture, or more likely that ACK were received in the
wrong order.
wscale=7, SYN and SYNACK not shown here.
This ACK allows the sender to send 1871*128 bytes from seq 51359321 :
New right edge of the window -> 51359321+1871*128=51598809
09:17:23.389210 IP A > B: Flags [.], ack 51359321, win 1871, options [nop,nop,TS val 10 ecr 999], length 0
09:17:23.389212 IP B > A: Flags [.], seq 51422681:51424089, ack 1577, win 268, options [nop,nop,TS val 999 ecr 10], length 1408
09:17:23.389214 IP A > B: Flags [.], ack 51422681, win 1376, options [nop,nop,TS val 10 ecr 999], length 0
09:17:23.389253 IP B > A: Flags [.], seq 51424089:51488857, ack 1577, win 268, options [nop,nop,TS val 999 ecr 10], length 64768
09:17:23.389272 IP A > B: Flags [.], ack 51488857, win 859, options [nop,nop,TS val 10 ecr 999], length 0
09:17:23.389275 IP B > A: Flags [.], seq 51488857:51521241, ack 1577, win 268, options [nop,nop,TS val 999 ecr 10], length 32384
Receiver now allows to send 606*128=77568 from seq 51521241 :
New right edge of the window -> 51521241+606*128=51598809
09:17:23.389296 IP A > B: Flags [.], ack 51521241, win 606, options [nop,nop,TS val 10 ecr 999], length 0
09:17:23.389308 IP B > A: Flags [.], seq 51521241:51553625, ack 1577, win 268, options [nop,nop,TS val 999 ecr 10], length 32384
It seems the sender exceeds RWIN allowance, since 51611353 > 51598809
09:17:23.389346 IP B > A: Flags [.], seq 51553625:51611353, ack 1577, win 268, options [nop,nop,TS val 999 ecr 10], length 57728
09:17:23.389356 IP B > A: Flags [.], seq 51611353:51618393, ack 1577, win 268, options [nop,nop,TS val 999 ecr 10], length 7040
09:17:23.389367 IP A > B: Flags [.], ack 51611353, win 0, options [nop,nop,TS val 10 ecr 999], length 0
netfilter conntrack is not happy and sends RST
09:17:23.389389 IP A > B: Flags [R], seq 92176528, win 0, length 0
09:17:23.389488 IP B > A: Flags [R], seq 174478967, win 0, length 0
Now imagine ACK were delivered out of order and tcp_add_backlog() sets window based on wrong packet.
New right edge of the window -> 51521241+859*128=51631193
Normally TCP stack handles OOO packets just fine, but it
turns out tcp_add_backlog() does not. It can update the window
field of the aggregated packet even if the ACK sequence
of the last received packet is too old.
Many thanks to Alexandre Ferrieux for independently reporting the issue
and suggesting a fix.
Fixes: 4f693b55c3 ("tcp: implement coalescing on backlog queue")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Alexandre Ferrieux <alexandre.ferrieux@orange.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently we skip calling tcp_cleanup_rbuf() when packets
are moved into the OoO queue or simply dropped. In both
cases we still increment tp->copied_seq, and we should
ask the TCP stack to check for ack.
Fixes: c76c695656 ("mptcp: call tcp_cleanup_rbuf on subflows")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently data fin on data packet are not handled properly:
the 'rcv_data_fin_seq' field is interpreted as the last
sequence number carrying a valid data, but for data fin
packet with valid maps we currently store map_seq + map_len,
that is, the next value.
The 'write_seq' fields carries instead the value subseguent
to the last valid byte, so in mptcp_write_data_fin() we
never detect correctly the last DSS map.
Fixes: 7279da6145 ("mptcp: Use MPTCP-level flag for sending DATA_FIN")
Fixes: 1a49b2c2a5 ("mptcp: Handle incoming 32-bit DATA_FIN values")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The rcu_read_lock() is not supposed to lock the kernel_sendmsg() API
since it has the lock_sock() in qrtr_sendmsg() which will sleep. Hence,
fix it by excluding the locking for kernel_sendmsg().
While at it, let's also use radix_tree_deref_retry() to confirm the
validity of the pointer returned by radix_tree_deref_slot() and use
radix_tree_iter_resume() to resume iterating the tree properly before
releasing the lock as suggested by Doug.
Fixes: a7809ff90c ("net: qrtr: ns: Protect radix_tree_deref_slot() using rcu read locks")
Reported-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rejecting non-native endian BTF overlapped with the addition
of support for it.
The rest were more simple overlapping changes, except the
renesas ravb binding update, which had to follow a file
move as well as a YAML conversion.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Make sure SKB control block is in the proper state during IPSEC
ESP-in-TCP encapsulation. From Sabrina Dubroca.
2) Various kinds of attributes were not being cloned properly when we
build new xfrm_state objects from existing ones. Fix from Antony
Antony.
3) Make sure to keep BTF sections, from Tony Ambardar.
4) TX DMA channels need proper locking in lantiq driver, from Hauke
Mehrtens.
5) Honour route MTU during forwarding, always. From Maciej
Żenczykowski.
6) Fix races in kTLS which can result in crashes, from Rohit
Maheshwari.
7) Skip TCP DSACKs with rediculous sequence ranges, from Priyaranjan
Jha.
8) Use correct address family in xfrm state lookups, from Herbert Xu.
9) A bridge FDB flush should not clear out user managed fdb entries
with the ext_learn flag set, from Nikolay Aleksandrov.
10) Fix nested locking of netdev address lists, from Taehee Yoo.
11) Fix handling of 32-bit DATA_FIN values in mptcp, from Mat Martineau.
12) Fix r8169 data corruptions on RTL8402 chips, from Heiner Kallweit.
13) Don't free command entries in mlx5 while comp handler could still be
running, from Eran Ben Elisha.
14) Error flow of request_irq() in mlx5 is busted, due to an off by one
we try to free and IRQ never allocated. From Maor Gottlieb.
15) Fix leak when dumping netlink policies, from Johannes Berg.
16) Sendpage cannot be performed when a page is a slab page, or the page
count is < 1. Some subsystems such as nvme were doing so. Create a
"sendpage_ok()" helper and use it as needed, from Coly Li.
17) Don't leak request socket when using syncookes with mptcp, from
Paolo Abeni.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (111 commits)
net/core: check length before updating Ethertype in skb_mpls_{push,pop}
net: mvneta: fix double free of txq->buf
net_sched: check error pointer in tcf_dump_walker()
net: team: fix memory leak in __team_options_register
net: typhoon: Fix a typo Typoon --> Typhoon
net: hinic: fix DEVLINK build errors
net: stmmac: Modify configuration method of EEE timers
tcp: fix syn cookied MPTCP request socket leak
libceph: use sendpage_ok() in ceph_tcp_sendpage()
scsi: libiscsi: use sendpage_ok() in iscsi_tcp_segment_map()
drbd: code cleanup by using sendpage_ok() to check page for kernel_sendpage()
tcp: use sendpage_ok() to detect misused .sendpage
nvme-tcp: check page by sendpage_ok() before calling kernel_sendpage()
net: add WARN_ONCE in kernel_sendpage() for improper zero-copy send
net: introduce helper sendpage_ok() in include/linux/net.h
net: usb: pegasus: Proper error handing when setting pegasus' MAC address
net: core: document two new elements of struct net_device
netlink: fix policy dump leak
net/mlx5e: Fix race condition on nhe->n pointer in neigh update
net/mlx5e: Fix VLAN create flow
...
If someone calls setsockopt() twice to set a server key keyring, the first
keyring is leaked.
Fix it to return an error instead if the server key keyring is already set.
Fixes: 17926a7932 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Signed-off-by: David Howells <dhowells@redhat.com>
The keyring containing the server's tokens isn't network-namespaced, so it
shouldn't be looked up with a network namespace. It is expected to be
owned specifically by the server, so namespacing is unnecessary.
Fixes: a58946c158 ("keys: Pass the network namespace into request_key mechanism")
Signed-off-by: David Howells <dhowells@redhat.com>
When a new incoming call arrives at an userspace rxrpc socket on a new
connection that has a security class set, the code currently pushes it onto
the accept queue to hold a ref on it for the socket. This doesn't work,
however, as recvmsg() pops it off, notices that it's in the SERVER_SECURING
state and discards the ref. This means that the call runs out of refs too
early and the kernel oopses.
By contrast, a kernel rxrpc socket manually pre-charges the incoming call
pool with calls that already have user call IDs assigned, so they are ref'd
by the call tree on the socket.
Change the mode of operation for userspace rxrpc server sockets to work
like this too. Although this is a UAPI change, server sockets aren't
currently functional.
Fixes: 248f219cb8 ("rxrpc: Rewrite the data and ack handling code")
Signed-off-by: David Howells <dhowells@redhat.com>
conn->state_lock may be taken in softirq mode, but a previous patch
replaced an outer lock in the response-packet event handling code, and lost
the _bh from that when doing so.
Fix this by applying the _bh annotation to the state_lock locking.
Fixes: a1399f8bb0 ("rxrpc: Call channels should have separate call number spaces")
Signed-off-by: David Howells <dhowells@redhat.com>
If rxrpc_read() (which allows KEYCTL_READ to read a key), sees a token of a
type it doesn't recognise, it can BUG in a couple of places, which is
unnecessary as it can easily get back to userspace.
Fix this to print an error message instead.
Fixes: 99455153d0 ("RxRPC: Parse security index 5 keys (Kerberos 5)")
Signed-off-by: David Howells <dhowells@redhat.com>
The session key should be encoded with just the 8 data bytes and
no length; ENCODE_DATA precedes it with a 4 byte length, which
confuses some existing tools that try to parse this format.
Add an ENCODE_BYTES macro that does not include a length, and use
it for the key. Also adjust the expected length.
Note that commit 774521f353 ("rxrpc: Fix an assertion in
rxrpc_read()") had fixed a BUG by changing the length rather than
fixing the encoding. The original length was correct.
Fixes: 99455153d0 ("RxRPC: Parse security index 5 keys (Kerberos 5)")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
A driver may refuse to enable VLAN filtering for any reason beyond what
the DSA framework cares about, such as:
- having tc-flower rules that rely on the switch being VLAN-aware
- the particular switch does not support VLAN, even if the driver does
(the DSA framework just checks for the presence of the .port_vlan_add
and .port_vlan_del pointers)
- simply not supporting this configuration to be toggled at runtime
Currently, when a driver rejects a configuration it cannot support, it
does this from the commit phase, which triggers various warnings in
switchdev.
So propagate the prepare phase to drivers, to give them the ability to
refuse invalid configurations cleanly and avoid the warnings.
Since we need to modify all function prototypes and check for the
prepare phase from within the drivers, take that opportunity and move
the existing driver restrictions within the prepare phase where that is
possible and easy.
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Woojung Huh <woojung.huh@microchip.com>
Cc: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: Landen Chao <Landen.Chao@mediatek.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Jonathan McDowell <noodles@earth.li>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The only usage of these is to assign their address to the small_ops field
in the genl_family struct, which is a const pointer, and applying
ARRAY_SIZE() on them. Make them const to allow the compiler to put them
in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The only usages of mptcp_pm_ops is to assign its address to the small_ops
field of the genl_family struct, which is a const pointer, and applying
ARRAY_SIZE() on it. Make it const to allow the compiler to put it in
read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Openvswitch allows to drop a packet's Ethernet header, therefore
skb_mpls_push() and skb_mpls_pop() might be called with ethernet=true
and mac_len=0. In that case the pointer passed to skb_mod_eth_type()
doesn't point to an Ethernet header and the new Ethertype is written at
unexpected locations.
Fix this by verifying that mac_len is big enough to contain an Ethernet
header.
Fixes: fa4e0f8855 ("net/sched: fix corrupted L2 header with MPLS 'push' and 'pop' actions")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Although we take RTNL on dump path, it is possible to
skip RTNL on insertion path. So the following race condition
is possible:
rtnl_lock() // no rtnl lock
mutex_lock(&idrinfo->lock);
// insert ERR_PTR(-EBUSY)
mutex_unlock(&idrinfo->lock);
tc_dump_action()
rtnl_unlock()
So we have to skip those temporary -EBUSY entries on dump path
too.
Reported-and-tested-by: syzbot+b47bc4f247856fb4d9e1@syzkaller.appspotmail.com
Fixes: 0fedc63fad ("net_sched: commit action insertions together")
Cc: Vlad Buslov <vladbu@mellanox.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow DSA drivers to make use of devlink port regions, via simple
wrappers.
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow regions to be registered to a devlink port. The same netlink API
is used, but the port index is provided to indicate when a region is a
port region as opposed to a device region.
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
DSA drivers want to create regions on devlink ports as well as the
devlink device instance, in order to export registers and other tables
per port. To keep all this code together in the drivers, have the
devlink ports registered early, so the setup() method can setup both
device and port devlink regions.
v3:
Remove dp->setup
Move common code out of switch statement.
Fix wrong goto
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If a port is unused, still create a devlink port for it, but set the
flavour to unused. This allows us to attach devlink regions to the
port, etc.
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Not all ports of a switch need to be used, particularly in embedded
systems. Add a port flavour for ports which physically exist in the
switch, but are not connected to the front panel etc, and so are
unused. By having unused ports present in devlink, it gives a more
accurate representation of the hardware. It also allows regions to be
associated to such ports, so allowing, for example, to determine
unused ports are correctly powered off, or to compare probable reset
defaults of unused ports to used ports experiences issues.
Actually registering unused ports and setting the flavour to unused is
optional. The DSA core will register all such switch ports, but such
ports are expected to be limited in number. Bigger ASICs may decide
not to list unused ports.
v2:
Expand the description about why it is useful
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Rename 'searched' column to 'clashres' in conntrack /proc/ stats
to amend a recent patch, from Florian Westphal.
2) Remove unused nft_data_debug(), from YueHaibing.
3) Remove unused definitions in IPVS, also from YueHaibing.
4) Fix user data memleak in tables and objects, this is also amending
a recent patch, from Jose M. Guisado.
5) Use nla_memdup() to allocate user data in table and objects, also
from Jose M. Guisado
6) User data support for chains, from Jose M. Guisado
7) Remove unused definition in nf_tables_offload, from YueHaibing.
8) Use kvzalloc() in ip_set_alloc(), from Vasily Averin.
9) Fix false positive reported by lockdep in nfnetlink mutexes,
from Florian Westphal.
10) Extend fast variant of cmp for neq operation, from Phil Sutter.
11) Implement fast bitwise variant, also from Phil Sutter.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
A typical use of bitwise expression is to mask out parts of an IP
address when matching on the network part only. Optimize for this common
use with a fast variant for NFT_BITWISE_BOOL-type expressions operating
on 32bit-sized values.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add a boolean indicating NFT_CMP_NEQ. To include it into the match
decision, it is sufficient to XOR it with the data comparison's result.
While being at it, store the mask that is calculated during expression
init and free the eval routine from having to recalculate it each time.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
From time to time there are lockdep reports similar to this one:
WARNING: possible circular locking dependency detected
------------------------------------------------------
000000004f61aa56 (&table[i].mutex){+.+.}, at: nfnl_lock [nfnetlink]
but task is already holding lock:
[..] (&net->nft.commit_mutex){+.+.}, at: nf_tables_valid_genid [nf_tables]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&net->nft.commit_mutex){+.+.}:
[..]
nf_tables_valid_genid+0x18/0x60 [nf_tables]
nfnetlink_rcv_batch+0x24c/0x620 [nfnetlink]
nfnetlink_rcv+0x110/0x140 [nfnetlink]
netlink_unicast+0x12c/0x1e0
[..]
sys_sendmsg+0x18/0x40
linux_sparc_syscall+0x34/0x44
-> #0 (&table[i].mutex){+.+.}:
[..]
nfnl_lock+0x24/0x40 [nfnetlink]
ip_set_nfnl_get_byindex+0x19c/0x280 [ip_set]
set_match_v1_checkentry+0x14/0xc0 [xt_set]
xt_check_match+0x238/0x260 [x_tables]
__nft_match_init+0x160/0x180 [nft_compat]
[..]
sys_sendmsg+0x18/0x40
linux_sparc_syscall+0x34/0x44
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&net->nft.commit_mutex);
lock(&table[i].mutex);
lock(&net->nft.commit_mutex);
lock(&table[i].mutex);
Lockdep considers this an ABBA deadlock because the different nfnl subsys
mutexes reside in the same lockdep class, but this is a false positive.
CPU1 table[i] refers to the nftables subsys mutex, whereas CPU1 locks
the ipset subsys mutex.
Yi Che reported a similar lockdep splat, this time between ipset and
ctnetlink subsys mutexes.
Time to place them in distinct classes to avoid these warnings.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Currently netadmin inside non-trusted container can quickly allocate
whole node's memory via request of huge ipset hashtable.
Other ipset-related memory allocations should be restricted too.
v2: fixed typo ALLOC -> ACCOUNT
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The MPTCP ADD_ADDR suboption with echo-flag=1 has no HMAC, the size is
smaller than the one initially sent without echo-flag=1. We then need to
use the correct size everywhere when we need this echo bit.
Before this patch, the wrong size was reserved but the correct amount of
bytes were written (and read): the remaining bytes contained garbage.
Fixes: 6a6c05a8b0 ("mptcp: send out ADD_ADDR with echo flag")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/95
Reported-and-tested-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Define the MAC_PUSH action which pushes an MPLS LSE before the mac
header (instead of between the mac and the network headers as the
plain PUSH action does).
The only special case is when the skb has an offloaded VLAN. In that
case, it has to be inlined before pushing the MPLS header.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement TCA_VLAN_ACT_POP_ETH and TCA_VLAN_ACT_PUSH_ETH, to
respectively pop and push a base Ethernet header at the beginning of a
frame.
POP_ETH is just a matter of pulling ETH_HLEN bytes. VLAN tags, if any,
must be stripped before calling POP_ETH.
PUSH_ETH is restricted to skbs with no mac_header, and only the MAC
addresses can be configured. The Ethertype is automatically set from
skb->protocol. These restrictions ensure that all skb's fields remain
consistent, so that this action can't confuse other part of the
networking stack (like GSO).
Since openvswitch already had these actions, consolidate the code in
skbuff.c (like for vlan and mpls push/pop).
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The check for old hardware versions that did not have SMCDv2 support was
using suspicious pointer magic. Address the fields using an array.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When building a CLC proposal message then the list of ISM devices does
not need to contain multiple devices that have the same chid value,
all these devices use the same function at the end.
Improve smc_find_ism_v2_device_clnt() to collect only ISM devices that
have unique chid values.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The retransmission refactoring patch
686989700c ("tcp: simplify tcp_mark_skb_lost")
does not properly update the total lost packet counter which may
break the policer mode in BBR. This patch fixes it.
Fixes: 686989700c ("tcp: simplify tcp_mark_skb_lost")
Reported-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
smatch complains about
net/iucv/iucv.c:1119 __iucv_message_receive() warn: inconsistent indenting
While touching this line, also make the return logic consistent and thus
get rid of a goto label.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
smatch complains about
net/iucv/af_iucv.c:624 iucv_sock_bind() error: memcpy() 'sa->siucv_user_id' too small (8 vs 9)
Which is absolutely correct - the memcpy() takes 9 bytes (sizeof(uid))
from an 8-byte field (sa->siucv_user_id).
Luckily the sockaddr_iucv struct contains more data after the
.siucv_user_id field, and we checked the size of the passed data earlier
on. So the memcpy() won't accidentally read from an invalid location.
Fix the warning by reducing the size of the uid variable to what's
actually needed, and thus reducing the amount of copied data.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Right now CTRL_CMD_GETPOLICY can only dump the family-wide
policy. Support dumping policy of a specific op.
v3:
- rebase after per-op policy export and handle that
v2:
- make cmd U32, just in case.
v1:
- don't echo op in the output in a naive way, this should
make it cleaner to extend the output format for dumping
policies for all the commands at once in the future.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20201001225933.1373426-11-kuba@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for per-op policy dumping. The data is pretty much
as before, except that now the assumption that the policy with
index 0 is "the" policy no longer holds - you now need to look
at the new CTRL_ATTR_OP_POLICY attribute which is a nested attr
(indexed by op) containing attributes for do and dump policies.
When a single op is requested, the CTRL_ATTR_OP_POLICY will be
added in the same way, since do and dump policies may differ.
v2:
- conditionally advertise per-command policies only if there
actually is a policy being used for the do/dump and it's
present at all
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We'll need this later for the per-op policy index dump.
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rework the policy dump code a bit to support adding multiple
policies to a single dump, in order to e.g. support per-op
policies in generic netlink.
v2:
- move kernel-doc to implementation [Jakub]
- squash the first patch to not flip-flop on the prototype
[Jakub]
- merge netlink_policy_dump_get_policy_idx() with the old
get_policy_idx() we already had
- rebase without Jakub's patch to have per-op dump
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The maxtype is really an integral part of the policy, and while we
haven't gotten into a situation yet where this happens, it seems
that some developer might eventually have two places pointing to
identical policies, with different maxattr to exclude some attrs
in one of the places.
Even if not, it's really the right thing to compare both since the
two data items fundamentally belong together.
v2:
- also do the proper comparison in get_policy_idx()
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use in compat_syscall to import either native or the compat iovecs, and
remove the now superflous compat_import_iovec.
This removes the need for special compat logic in most callers, and
the remaining ones can still be simplified by using __import_iovec
with a bool compat parameter.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
In preparation for adding a new attribute to CTRL_CMD_GETPOLICY
split the policies for getpolicy and getfamily apart.
This will cause a slight user-visible change in that dumping
the policies will switch from per family to per op, but
supposedly sniffer-type applications (which are the main use
case for policy dumping thus far) should support both, anyway.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Attributes are already parsed based on the policy specified
in the family and ready-to-use in info->attrs. No need to
call genlmsg_parse() again.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add policy to the struct genl_ops structure, this time
with maxattr, so it can be used properly.
Propagate .policy and .maxattr from the family
in genl_get_cmd() if needed, this way the rest of the
code does not have to worry if the policy is per op
or global.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The structure of ctrl_dumppolicy() is clearly split into
init and dumping. Move the init to a .start callback
for clarity, it's a more idiomatic netlink dump code structure.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Whenever netlink dump uses more than 2 cb->args[] entries
code gets hard to read. We're about to add more state to
ctrl_dumppolicy() so create a structure.
Since the structure is typed and clearly named we can remove
the local fam_id variable and use ctx->fam_id directly.
v3:
- rebase onto explicit free fix
v1:
- s/nl_policy_dump/netlink_policy_dump_state/
- forward declare struct netlink_policy_dump_state,
and move from passing unsigned long to actual pointer type
- add build bug on
- u16 fam_id
- s/args/ctx/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bulk of the genetlink users can use smaller ops, move them.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
We want to add maxattr and policy back to genl_ops, to enable
dumping per command policy to user space. This, however, would
cause bloat for all the families with global policies. Introduce
smaller version of ops (half the size of genl_ops). Translate
these smaller ops into a full blown struct before use in the
core.
v1:
- use struct assignment
- put a full copy of the op in struct genl_dumpit_info
- s/light/small/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new devlink callback, .trap_group_action_set(), which can be used
by device drivers which do not support controlling the action (drop,
trap) on each trap but rather on the entire group trap.
If this new callback is populated, it will take precedence over the
.trap_action_set() callback when the user requests a change of all the
traps in a group.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add parser error drop packet traps, so that capable device driver could
register them with devlink. The new packet trap group holds any drops of
packets which were marked by the device as erroneous during header
parsing. Add documentation for every added packet trap and packet trap
group.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If a syn-cookies request socket don't pass MPTCP-level
validation done in syn_recv_sock(), we need to release
it immediately, or it will be leaked.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/89
Fixes: 9466a1cceb ("mptcp: enable JOIN requests even if cookies are in use")
Reported-and-tested-by: Geliang Tang <geliangtang@gmail.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* lots more S1G band support
* 6 GHz scanning, finally
* kernel-doc fixes
* non-split wiphy dump fixes in nl80211
* various other small cleanups/features
-----BEGIN PGP SIGNATURE-----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=B9Xl
-----END PGP SIGNATURE-----
Merge tag 'mac80211-next-for-net-next-2020-10-02' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
Another set of changes, this time with:
* lots more S1G band support
* 6 GHz scanning, finally
* kernel-doc fixes
* non-split wiphy dump fixes in nl80211
* various other small cleanups/features
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In libceph, ceph_tcp_sendpage() does the following checks before handle
the page by network layer's zero copy sendpage method,
if (page_count(page) >= 1 && !PageSlab(page))
This check is exactly what sendpage_ok() does. This patch replace the
open coded checks by sendpage_ok() as a code cleanup.
Signed-off-by: Coly Li <colyli@suse.de>
Acked-by: Jeff Layton <jlayton@kernel.org>
Cc: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit a10674bf24 ("tcp: detecting the misuse of .sendpage for Slab
objects") adds the checks for Slab pages, but the pages don't have
page_count are still missing from the check.
Network layer's sendpage method is not designed to send page_count 0
pages neither, therefore both PageSlab() and page_count() should be
both checked for the sending page. This is exactly what sendpage_ok()
does.
This patch uses sendpage_ok() in do_tcp_sendpages() to detect misused
.sendpage, to make the code more robust.
Fixes: a10674bf24 ("tcp: detecting the misuse of .sendpage for Slab objects")
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Coly Li <colyli@suse.de>
Cc: Vasily Averin <vvs@virtuozzo.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
If a page sent into kernel_sendpage() is a slab page or it doesn't have
ref_count, this page is improper to send by the zero copy sendpage()
method. Otherwise such page might be unexpected released in network code
path and causes impredictable panic due to kernel memory management data
structure corruption.
This path adds a WARN_ON() on the sending page before sends it into the
concrete zero-copy sendpage() method, if the page is improper for the
zero-copy sendpage() method, a warning message can be observed before
the consequential unpredictable kernel panic.
This patch does not change existing kernel_sendpage() behavior for the
improper page zero-copy send, it just provides hint warning message for
following potential panic due the kernel memory heap corruption.
Signed-off-by: Coly Li <colyli@suse.de>
Cc: Cong Wang <amwang@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This implements a new helper skb_adjust_room() so users can push/pop
extra bytes from a BPF_SK_SKB_STREAM_VERDICT program.
Some protocols may include headers and other information that we may
not want to include when doing a redirect from a BPF_SK_SKB_STREAM_VERDICT
program. One use case is to redirect TLS packets into a receive socket
that doesn't expect TLS data. In TLS case the first 13B or so contain the
protocol header. With KTLS the payload is decrypted so we should be able
to redirect this to a receiving socket, but the receiving socket may not
be expecting to receive a TLS header and discard the data. Using the
above helper we can pop the header off and put an appropriate header on
the payload. This allows for creating a proxy between protocols without
extra hops through the stack or userspace.
So in order to fix this case add skb_adjust_room() so users can strip the
header. After this the user can strip the header and an unmodified receiver
thread will work correctly when data is redirected into the ingress path
of a sock.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/160160099197.7052.8443193973242831692.stgit@john-Precision-5820-Tower
Now that we are guaranteed that dsa_untag_bridge_pvid() is called after
eth_type_trans() we can utilize __vlan_find_dev_deep_rcu() which will
take care of finding an 802.1Q upper on top of a bridge master.
A common use case, prior to 12a1526d067 ("net: dsa: untag the bridge
pvid from rx skbs") was to configure a bridge 802.1Q upper like this:
ip link add name br0 type bridge vlan_filtering 0
ip link add link br0 name br0.1 type vlan id 1
in order to pop the default_pvid VLAN tag.
With this change we restore that behavior while still allowing the DSA
receive path to automatically pop the VLAN tag.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that dsa_untag_bridge_pvid() is called after eth_type_trans() we are
guaranteed that skb->protocol will be set to a correct value, thus
allowing us to avoid calling vlan_eth_hdr().
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Indicate to the DSA receive path that we need to untage the bridge PVID,
this allows us to remove the dsa_untag_bridge_pvid() calls from
net/dsa/tag_brcm.c.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a DSA switch driver needs to call dsa_untag_bridge_pvid(), it can
set dsa_switch::untag_brige_pvid to indicate this is necessary.
This is a pre-requisite to making sure that we are always calling
dsa_untag_bridge_pvid() after eth_type_trans() has been called.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2020-10-02
1) Add a full xfrm compatible layer for 32-bit applications on
64-bit kernels. From Dmitry Safonov.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
[ Upstream commit a95bc734e6 ]
If userspace doesn't complete the policy dump, we leak the
allocated state. Fix this.
Fixes: d07dcf9aad ("netlink: add infrastructure to expose policies to userspace")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
If userspace doesn't complete the policy dump, we leak the
allocated state. Fix this.
Fixes: d07dcf9aad ("netlink: add infrastructure to expose policies to userspace")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The commit 0813a84156 ("bpf: tcp: Allow bpf prog to write and parse TCP header option")
unnecessarily introduced bpf_skops_init_child() which limited the child
sk from inheriting all bpf_sock_ops_cb_flags of the listen sk. That
breaks existing user expectation.
This patch removes the bpf_skops_init_child() and just allows
sock_copy() to do its job to copy everything from listen sk to
the child sk.
Fixes: 0813a84156 ("bpf: tcp: Allow bpf prog to write and parse TCP header option")
Reported-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201002013448.2542025-1-kafai@fb.com
In ieee80211_determine_chantype(), the sband->ht_cap was
being processed before S1G Operation element. Since the
HT capability element should not be present on the S1G
band, avoid processing potential garbage by moving the
call to ieee80211_apply_htcap_overrides() to after the S1G
block.
Also, in case of a missing S1G Operation element, we would
continue trying to process non-S1G elements (and return
with a channel width of 20MHz). Instead, just assume
primary channel is equal to operating and infer the
operating width from the BSS channel, then return.
Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20201001174748.24520-1-thomas@adapt-ip.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When dumping wiphy information, we try to split the data into
many submessages, but for old userspace we still support the
old mode where this doesn't happen.
However, in this case we were not resetting our state correctly
and dumping multiple messages for each wiphy, which would have
broken such older userspace.
This was broken pretty much immediately afterwards because it
only worked in the original commit where non-split dumps didn't
have any more data than split dumps...
Fixes: fe1abafd94 ("nl80211: re-add channel width and extended capa advertising")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20200928130717.3e6d9c6bada2.Ie0f151a8d0d00a8e1e18f6a8c9244dd02496af67@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When wiphy dumps cannot be split, such as in events or with
older userspace that doesn't support it, the size can today
be too big.
Reduce it, by doing two things:
1) remove data that couldn't have been present before the
split capability was introduced since it's new, such as
HE capabilities
2) as suggested by Martin Willi, remove management frame
subtypes from the split dumps, as just (1) isn't even
enough due to other new code capabilities. This is fine
as old consumers (really just wpa_supplicant) didn't
check this data before they got support for split dumps.
Reported-by: Martin Willi <martin@strongswan.org>
Suggested-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Tested-by: Martin Willi <martin@strongswan.org>
Link: https://lore.kernel.org/r/20200928130655.53bce7873164.I71f06c9a221cd0630429a1a56eeae68a13beca61@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fix follow warnings:
[net/core/net-sysfs.c:1161]: (warning) %u in format string (no. 1)
requires 'unsigned int' but the argument type is 'int'.
[net/core/net-sysfs.c:1162]: (warning) %u in format string (no. 1)
requires 'unsigned int' but the argument type is 'int'.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix follow warnings:
[net/core/pktgen.c:925]: (warning) %u in format string (no. 1)
requires 'unsigned int' but the argument type is 'signed int'.
[net/core/pktgen.c:942]: (warning) %u in format string (no. 1)
requires 'unsigned int' but the argument type is 'signed int'.
[net/core/pktgen.c:962]: (warning) %u in format string (no. 1)
requires 'unsigned int' but the argument type is 'signed int'.
[net/core/pktgen.c:984]: (warning) %u in format string (no. 1)
requires 'unsigned int' but the argument type is 'signed int'.
[net/core/pktgen.c:1149]: (warning) %d in format string (no. 1)
requires 'int' but the argument type is 'unsigned int'.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-10-01
The following pull-request contains BPF updates for your *net-next* tree.
We've added 90 non-merge commits during the last 8 day(s) which contain
a total of 103 files changed, 7662 insertions(+), 1894 deletions(-).
Note that once bpf(/net) tree gets merged into net-next, there will be a small
merge conflict in tools/lib/bpf/btf.c between commit 1245008122 ("libbpf: Fix
native endian assumption when parsing BTF") from the bpf tree and the commit
3289959b97 ("libbpf: Support BTF loading and raw data output in both endianness")
from the bpf-next tree. Correct resolution would be to stick with bpf-next, it
should look like:
[...]
/* check BTF magic */
if (fread(&magic, 1, sizeof(magic), f) < sizeof(magic)) {
err = -EIO;
goto err_out;
}
if (magic != BTF_MAGIC && magic != bswap_16(BTF_MAGIC)) {
/* definitely not a raw BTF */
err = -EPROTO;
goto err_out;
}
/* get file size */
[...]
The main changes are:
1) Add bpf_snprintf_btf() and bpf_seq_printf_btf() helpers to support displaying
BTF-based kernel data structures out of BPF programs, from Alan Maguire.
2) Speed up RCU tasks trace grace periods by a factor of 50 & fix a few race
conditions exposed by it. It was discussed to take these via BPF and
networking tree to get better testing exposure, from Paul E. McKenney.
3) Support multi-attach for freplace programs, needed for incremental attachment
of multiple XDP progs using libxdp dispatcher model, from Toke Høiland-Jørgensen.
4) libbpf support for appending new BTF types at the end of BTF object, allowing
intrusive changes of prog's BTF (useful for future linking), from Andrii Nakryiko.
5) Several BPF helper improvements e.g. avoid atomic op in cookie generator and add
a redirect helper into neighboring subsys, from Daniel Borkmann.
6) Allow map updates on sockmaps from bpf_iter context in order to migrate sockmaps
from one to another, from Lorenz Bauer.
7) Fix 32 bit to 64 bit assignment from latest alu32 bounds tracking which caused
a verifier issue due to type downgrade to scalar, from John Fastabend.
8) Follow-up on tail-call support in BPF subprogs which optimizes x64 JIT prologue
and epilogue sections, from Maciej Fijalkowski.
9) Add an option to perf RB map to improve sharing of event entries by avoiding remove-
on-close behavior. Also, add BPF_PROG_TEST_RUN for raw_tracepoint, from Song Liu.
10) Fix a crash in AF_XDP's socket_release when memory allocation for UMEMs fails,
from Magnus Karlsson.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Michal reported a build failure likes below:
BTFIDS vmlinux
FAILED unresolved symbol tcp_timewait_sock
make[1]: *** [/.../linux-5.9-rc7/Makefile:1176: vmlinux] Error 255
This error can be triggered when config has CONFIG_NET enabled
but CONFIG_INET disabled. In this case, there is no user of
istructs inet_timewait_sock and tcp_timewait_sock and hence
vmlinux BTF types are not generated for these two structures.
To fix the problem, let us force BTF generation for these two
structures with BTF_TYPE_EMIT.
Fixes: fce557bcef ("bpf: Make btf_sock_ids global")
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20201001051339.2549085-1-yhs@fb.com
Now we have a io_uring kernel header, move this definition out of fs.h
and into io_uring.h where it belongs.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Previously, devlink called into drop monitor in order to report hardware
originated drops / exceptions. devlink intentionally filtered control
packets and did not pass them to drop monitor as they were not dropped
by the underlying hardware.
Now drop monitor registers its probe on a generic 'devlink_trap_report'
tracepoint and should therefore perform this filtering itself instead of
having devlink do that.
Add the trap type as metadata and have drop monitor ignore control
packets.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
'struct net_dm_hw_metadata' is a duplicate of 'struct
devlink_trap_metadata'.
Remove the former and simplify the code.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The old probe functions that were invoked by drop monitor code are no
longer called and can thus be removed. They were replaced by actual
probe functions that are registered on the recently introduced
'devlink_trap_report' tracepoint.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert drop monitor to use the recently introduced
'devlink_trap_report' tracepoint instead of having devlink call into
drop monitor.
This is both consistent with software originated drops ('kfree_skb'
tracepoint) and also allows drop monitor to be built as a module and
still report hardware originated drops.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Drop monitor supports two alerting modes: Summary and packet. Prepare a
probe function for each, so that they could be later registered on the
devlink tracepoint by calling register_trace_devlink_trap_report(),
based on the configured alerting mode.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a tracepoint for trap reports so that drop monitor could register
its probe on it. Use trace_devlink_trap_report_enabled() to avoid
wasting cycles setting the trap metadata if the tracepoint is not
enabled.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Whenever host is under very high memory pressure,
__tcp_send_ack() skb allocation fails, and we setup
a 200 ms (TCP_DELACK_MAX) timer before retrying.
On hosts with high number of TCP sockets, we can spend
considerable amount of cpu cycles in these attempts,
add high pressure on various spinlocks in mm-layer,
ultimately blocking threads attempting to free space
from making any progress.
This patch adds standard exponential backoff to avoid
adding fuel to the fire.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TCP has been using it to work around the possibility of tcp_delack_timer()
finding the socket owned by user.
After commit 6f458dfb40 ("tcp: improve latencies of timer triggered events")
we added TCP_DELACK_TIMER_DEFERRED atomic bit for more immediate recovery,
so we can get rid of icsk_ack.blocked
This frees space that following patch will reuse.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a redirect_neigh() helper as redirect() drop-in replacement
for the xmit side. Main idea for the helper is to be very similar
in semantics to the latter just that the skb gets injected into
the neighboring subsystem in order to let the stack do the work
it knows best anyway to populate the L2 addresses of the packet
and then hand over to dev_queue_xmit() as redirect() does.
This solves two bigger items: i) skbs don't need to go up to the
stack on the host facing veth ingress side for traffic egressing
the container to achieve the same for populating L2 which also
has the huge advantage that ii) the skb->sk won't get orphaned in
ip_rcv_core() when entering the IP routing layer on the host stack.
Given that skb->sk neither gets orphaned when crossing the netns
as per 9c4c325252 ("skbuff: preserve sock reference when scrubbing
the skb.") the helper can then push the skbs directly to the phys
device where FQ scheduler can do its work and TCP stack gets proper
backpressure given we hold on to skb->sk as long as skb is still
residing in queues.
With the helper used in BPF data path to then push the skb to the
phys device, I observed a stable/consistent TCP_STREAM improvement
on veth devices for traffic going container -> host -> host ->
container from ~10Gbps to ~15Gbps for a single stream in my test
environment.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: David Ahern <dsahern@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Cc: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/bpf/f207de81629e1724899b73b8112e0013be782d35.1601477936.git.daniel@iogearbox.net
With its use in BPF, the cookie generator can be called very frequently
in particular when used out of cgroup v2 hooks (e.g. connect / sendmsg)
and attached to the root cgroup, for example, when used in v1/v2 mixed
environments. In particular, when there's a high churn on sockets in the
system there can be many parallel requests to the bpf_get_socket_cookie()
and bpf_get_netns_cookie() helpers which then cause contention on the
atomic counter.
As similarly done in f991bd2e14 ("fs: introduce a per-cpu last_ino
allocator"), add a small helper library that both can use for the 64 bit
counters. Given this can be called from different contexts, we also need
to deal with potential nested calls even though in practice they are
considered extremely rare. One idea as suggested by Eric Dumazet was
to use a reverse counter for this situation since we don't expect 64 bit
overflows anyways; that way, we can avoid bigger gaps in the 64 bit
counter space compared to just batch-wise increase. Even on machines
with small number of cores (e.g. 4) the cookie generation shrinks from
min/max/med/avg (ns) of 22/50/40/38.9 down to 10/35/14/17.3 when run
in parallel from multiple CPUs.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Link: https://lore.kernel.org/bpf/8a80b8d27d3c49f9a14e1d5213c19d8be87d1dc8.1601477936.git.daniel@iogearbox.net
Similarly to 5a52ae4e32 ("bpf: Allow to retrieve cgroup v1 classid
from v2 hooks"), add a helper to retrieve cgroup v1 classid solely
based on the skb->sk, so it can be used as key as part of BPF map
lookups out of tc from host ns, in particular given the skb->sk is
retained these days when crossing net ns thanks to 9c4c325252
("skbuff: preserve sock reference when scrubbing the skb."). This
is similar to bpf_skb_cgroup_id() which implements the same for v2.
Kubernetes ecosystem is still operating on v1 however, hence net_cls
needs to be used there until this can be dropped in with the v2
helper of bpf_skb_cgroup_id().
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/ed633cf27a1c620e901c5aa99ebdefb028dce600.1601477936.git.daniel@iogearbox.net
Enables storing userdata for nft_chain. Field udata points to user data
and udlen stores its length.
Adds new attribute flag NFTA_CHAIN_USERDATA.
Signed-off-by: Jose M. Guisado Gomez <guigom@riseup.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When userdata support was added to tables and objects, user data coming
from user space was allocated and copied using kzalloc + nla_memcpy.
Use nla_memdup to copy userdata of tables and objects.
Signed-off-by: Jose M. Guisado Gomez <guigom@riseup.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When userdata was introduced for tables and objects its allocation was
only freed inside the error path of the new{table, object} functions.
Free user data inside corresponding destroy functions for tables and
objects.
Fixes: b131c96496 ("netfilter: nf_tables: add userdata support for nft_object")
Fixes: 7a81575b80 ("netfilter: nf_tables: add userdata attributes to nft_table")
Signed-off-by: Jose M. Guisado Gomez <guigom@riseup.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Alexei Starovoitov says:
====================
pull-request: bpf 2020-09-29
The following pull-request contains BPF updates for your *net* tree.
We've added 7 non-merge commits during the last 14 day(s) which contain
a total of 7 files changed, 28 insertions(+), 8 deletions(-).
The main changes are:
1) fix xdp loading regression in libbpf for old kernels, from Andrii.
2) Do not discard packet when NETDEV_TX_BUSY, from Magnus.
3) Fix corner cases in libbpf related to endianness and kconfig, from Tony.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The peer may send a DATA_FIN mapping with either a 32-bit or 64-bit
sequence number. When a 32-bit sequence number is received for the
DATA_FIN, it must be expanded to 64 bits before comparing it to the
last acked sequence number. This expansion was missing.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/93
Fixes: 3721b9b646 ("mptcp: Track received DATA_FIN sequence number and add related helpers")
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The msk->ack_seq value is sometimes read without the msk lock held, so
make proper use of READ_ONCE and WRITE_ONCE.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Quite some drivers make conditional decisions based on in_interrupt() to
invoke either netif_rx() or netif_rx_ni().
Conditionals based on in_interrupt() or other variants of preempt count
checks in drivers should not exist for various reasons and Linus clearly
requested to either split the code pathes or pass an argument to the
common functions which provides the context.
This is obviously the correct solution, but for some of the affected
drivers this needs a major rewrite due to their convoluted structure.
As in_interrupt() usage in drivers needs to be phased out, provide
netif_rx_any_context() as a stop gap for these drivers.
This confines the in_interrupt() conditional to core code which in turn
allows to remove the access to this check for driver code and provides one
central place to do further modifications once the driver maze is cleaned
up.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
When an L2TPv3 session receives a data frame with an incorrect cookie
l2tp_core logs a warning message and bumps a stats counter to reflect
the fact that the packet has been dropped.
However, the stats counter in question is missing from the l2tp_netlink
get message for tunnel and session instances.
Include the statistic in the netlink get response.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hedberg says:
====================
pull request: bluetooth-next 2020-09-29
Here's the main bluetooth-next pull request for 5.10:
- Multiple fixes to suspend/resume handling
- Added mgmt events for controller suspend/resume state
- Improved extended advertising support
- btintel: Enhanced support for next generation controllers
- Added Qualcomm Bluetooth SoC WCN6855 support
- Several other smaller fixes & improvements
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
After 'peeking' the ring, the consumer, not the producer, reads the data.
Fix this mistake in the comments.
Fixes: 15d8c9162c ("xsk: Add function naming comments and reorder functions")
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20200928082344.17110-1-ciara.loftus@intel.com
Like all genl families ethtool_genl_family needs to not
be a straight up constant, because it's modified/initialized
by genl_register_family(). After init, however, it's only
passed to genlmsg_put() & co. therefore we can mark it
as __ro_after_init.
Since genl_family structure contains function pointers
mark this as a fix.
Fixes: 2b4a8990b7 ("ethtool: introduce ethtool netlink interface")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a regular need in the kernel to provide a way to declare having
a dynamically sized set of trailing elements in a structure. Kernel code
should always use “flexible array members”[1] for these cases. The older
style of one-element or zero-length arrays should no longer be used[2].
Refactor the code according to the use of a flexible-array member in
struct tc_u_hnode and use the struct_size() helper to calculate the
size for the allocations. Commit 5778d39d07 ("net_sched: fix struct
tc_u_hnode layout in u32") makes it clear that the code is expected to
dynamically allocate divisor + 1 entries for ->ht[] in tc_uhnode. Also,
based on other observations, as the piece of code below:
1232 for (h = 0; h <= ht->divisor; h++) {
1233 for (n = rtnl_dereference(ht->ht[h]);
1234 n;
1235 n = rtnl_dereference(n->next)) {
1236 if (tc_skip_hw(n->flags))
1237 continue;
1238
1239 err = u32_reoffload_knode(tp, n, add, cb,
1240 cb_priv, extack);
1241 if (err)
1242 return err;
1243 }
1244 }
we can assume that, in general, the code is actually expecting to allocate
that extra space for the one-element array in tc_uhnode, everytime it
allocates memory for instances of tc_uhnode or tc_u_common structures.
That's the reason for passing '1' as the last argument for struct_size()
in the allocation for _root_ht_ and _tp_c_, and 'divisor + 1' in the
allocation code for _ht_.
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays
Tested-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/5f7062af.z3T9tn9yIPv6h5Ny%25lkp@intel.com/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow passing a pointer to a BTF struct sock_common* when updating
a sockmap or sockhash. Since BTF pointers can fault and therefore be
NULL at runtime we need to add an additional !sk check to
sock_map_update_elem. Since we may be passed a request or timewait
socket we also need to check sk_fullsock. Doing this allows calling
map_update_elem on sockmap from bpf_iter context, which uses
BTF pointers.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200928090805.23343-2-lmb@cloudflare.com
similarly to what has been done with commit 9d149045b3 ("geneve: change
from tx_error to tx_dropped on missing metadata"), avoid reporting errors
to userspace in case the kernel doesn't find any tunnel information for a
skb that is going to be transmitted: an increase of tx_dropped is enough.
tested with the following script:
# for t in ip6gre ip6gretap ip6erspan; do
> ip link add dev gre6-test0 type $t external
> ip address add dev gre6-test0 2001:db8::1/64
> ip link set dev gre6-test0 up
> sleep 30
> ip -s -j link show dev gre6-test0 | jq \
> '.[0].stats64.tx | {"errors": .errors, "dropped": .dropped}'
> ip link del dev gre6-test0
> done
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch covers the small SMCD version 2 changes for CLC decline.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SMC Version 2 defines a first contact extension for CLC accept
and CLC confirm. This patch covers sending and receiving of the
CLC first contact extension.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The new format of SMCD V2 CLC accept and confirm is introduced,
and building and checking of SMCD V2 CLC accepts / confirms is adapted
accordingly.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SMCD Version 2 allows to propose up to 8 additional ISM devices
offered to the peer as candidates for SMCD communication.
This patch covers the server side, i.e. selection of an ISM device
matching one of the proposed ISM devices, that will be used for
CLC accept
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The new format of an SMCD V2 CLC proposal is introduced, and
building and checking of SMCD V2 CLC proposals is adapted
accordingly.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SMCD Version 2 allows to propose up to 8 additional ISM devices
offered to the peer as candidates for SMCD communication.
This patch covers determination of the ISM devices to be proposed.
ISM devices without PNETID are preferred, since ISM devices with
PNETID are a V1 leftover and will disappear over the time.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SMCD version 2 allows usage of ISM devices with hardware PNETID
only, if an Ethernet net_device exists with the same hardware PNETID.
This requires to maintain a list of pnetids belonging to
Ethernet net_devices, which is covered by this patch.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With SMCD version 2 the CHIDs of ISM devices are needed for the
CLC handshake.
This patch provides the new callback to retrieve the CHID of an
ISM device.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SMCD version 2 defines a System Enterprise ID (short SEID).
This patch contains the SEID creation and adds the callback to
retrieve the created SEID.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SMCD Version 2 allows proposing of up to 8 ISM devices in addition
to the native ISM device of SMCD Version 1.
This patch prepares the struct smc_init_info to deal with these
additional 8 ISM devices.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When sending CLC confirm and CLC accept, separate the trailing
part of the message from the initial part (to be prepared for
future first contact extension).
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch provides better separation of device determinations
in function smc_listen_work(). No functional change.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SMCD version 2 defines 2 more bits in the CLC header to specify
version 2 types. This patch prepares better naming of the CLC
header fields. No functional change.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the existing symbol _S instead of SMC_ASCII_BLANK, and introduce a
helper to check if a pnetid is set. No functional change.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch is to add a new variable 'nested_level' into the net_device
structure.
This variable will be used as a parameter of spin_lock_nested() of
dev->addr_list_lock.
netif_addr_lock() can be called recursively so spin_lock_nested() is
used instead of spin_lock() and dev->lower_level is used as a parameter
of spin_lock_nested().
But, dev->lower_level value can be updated while it is being used.
So, lockdep would warn a possible deadlock scenario.
When a stacked interface is deleted, netif_{uc | mc}_sync() is
called recursively.
So, spin_lock_nested() is called recursively too.
At this moment, the dev->lower_level variable is used as a parameter of it.
dev->lower_level value is updated when interfaces are being unlinked/linked
immediately.
Thus, After unlinking, dev->lower_level shouldn't be a parameter of
spin_lock_nested().
A (macvlan)
|
B (vlan)
|
C (bridge)
|
D (macvlan)
|
E (vlan)
|
F (bridge)
A->lower_level : 6
B->lower_level : 5
C->lower_level : 4
D->lower_level : 3
E->lower_level : 2
F->lower_level : 1
When an interface 'A' is removed, it releases resources.
At this moment, netif_addr_lock() would be called.
Then, netdev_upper_dev_unlink() is called recursively.
Then dev->lower_level is updated.
There is no problem.
But, when the bridge module is removed, 'C' and 'F' interfaces
are removed at once.
If 'F' is removed first, a lower_level value is like below.
A->lower_level : 5
B->lower_level : 4
C->lower_level : 3
D->lower_level : 2
E->lower_level : 1
F->lower_level : 1
Then, 'C' is removed. at this moment, netif_addr_lock() is called
recursively.
The ordering is like this.
C(3)->D(2)->E(1)->F(1)
At this moment, the lower_level value of 'E' and 'F' are the same.
So, lockdep warns a possible deadlock scenario.
In order to avoid this problem, a new variable 'nested_level' is added.
This value is the same as dev->lower_level - 1.
But this value is updated in rtnl_unlock().
So, this variable can be used as a parameter of spin_lock_nested() safely
in the rtnl context.
Test commands:
ip link add br0 type bridge vlan_filtering 1
ip link add vlan1 link br0 type vlan id 10
ip link add macvlan2 link vlan1 type macvlan
ip link add br3 type bridge vlan_filtering 1
ip link set macvlan2 master br3
ip link add vlan4 link br3 type vlan id 10
ip link add macvlan5 link vlan4 type macvlan
ip link add br6 type bridge vlan_filtering 1
ip link set macvlan5 master br6
ip link add vlan7 link br6 type vlan id 10
ip link add macvlan8 link vlan7 type macvlan
ip link set br0 up
ip link set vlan1 up
ip link set macvlan2 up
ip link set br3 up
ip link set vlan4 up
ip link set macvlan5 up
ip link set br6 up
ip link set vlan7 up
ip link set macvlan8 up
modprobe -rv bridge
Splat looks like:
[ 36.057436][ T744] WARNING: possible recursive locking detected
[ 36.058848][ T744] 5.9.0-rc6+ #728 Not tainted
[ 36.059959][ T744] --------------------------------------------
[ 36.061391][ T744] ip/744 is trying to acquire lock:
[ 36.062590][ T744] ffff8c4767509280 (&vlan_netdev_addr_lock_key){+...}-{2:2}, at: dev_set_rx_mode+0x19/0x30
[ 36.064922][ T744]
[ 36.064922][ T744] but task is already holding lock:
[ 36.066626][ T744] ffff8c4767769280 (&vlan_netdev_addr_lock_key){+...}-{2:2}, at: dev_uc_add+0x1e/0x60
[ 36.068851][ T744]
[ 36.068851][ T744] other info that might help us debug this:
[ 36.070731][ T744] Possible unsafe locking scenario:
[ 36.070731][ T744]
[ 36.072497][ T744] CPU0
[ 36.073238][ T744] ----
[ 36.074007][ T744] lock(&vlan_netdev_addr_lock_key);
[ 36.075290][ T744] lock(&vlan_netdev_addr_lock_key);
[ 36.076590][ T744]
[ 36.076590][ T744] *** DEADLOCK ***
[ 36.076590][ T744]
[ 36.078515][ T744] May be due to missing lock nesting notation
[ 36.078515][ T744]
[ 36.080491][ T744] 3 locks held by ip/744:
[ 36.081471][ T744] #0: ffffffff98571df0 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x236/0x490
[ 36.083614][ T744] #1: ffff8c4767769280 (&vlan_netdev_addr_lock_key){+...}-{2:2}, at: dev_uc_add+0x1e/0x60
[ 36.085942][ T744] #2: ffff8c476c8da280 (&bridge_netdev_addr_lock_key/4){+...}-{2:2}, at: dev_uc_sync+0x39/0x80
[ 36.088400][ T744]
[ 36.088400][ T744] stack backtrace:
[ 36.089772][ T744] CPU: 6 PID: 744 Comm: ip Not tainted 5.9.0-rc6+ #728
[ 36.091364][ T744] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 36.093630][ T744] Call Trace:
[ 36.094416][ T744] dump_stack+0x77/0x9b
[ 36.095385][ T744] __lock_acquire+0xbc3/0x1f40
[ 36.096522][ T744] lock_acquire+0xb4/0x3b0
[ 36.097540][ T744] ? dev_set_rx_mode+0x19/0x30
[ 36.098657][ T744] ? rtmsg_ifinfo+0x1f/0x30
[ 36.099711][ T744] ? __dev_notify_flags+0xa5/0xf0
[ 36.100874][ T744] ? rtnl_is_locked+0x11/0x20
[ 36.101967][ T744] ? __dev_set_promiscuity+0x7b/0x1a0
[ 36.103230][ T744] _raw_spin_lock_bh+0x38/0x70
[ 36.104348][ T744] ? dev_set_rx_mode+0x19/0x30
[ 36.105461][ T744] dev_set_rx_mode+0x19/0x30
[ 36.106532][ T744] dev_set_promiscuity+0x36/0x50
[ 36.107692][ T744] __dev_set_promiscuity+0x123/0x1a0
[ 36.108929][ T744] dev_set_promiscuity+0x1e/0x50
[ 36.110093][ T744] br_port_set_promisc+0x1f/0x40 [bridge]
[ 36.111415][ T744] br_manage_promisc+0x8b/0xe0 [bridge]
[ 36.112728][ T744] __dev_set_promiscuity+0x123/0x1a0
[ 36.113967][ T744] ? __hw_addr_sync_one+0x23/0x50
[ 36.115135][ T744] __dev_set_rx_mode+0x68/0x90
[ 36.116249][ T744] dev_uc_sync+0x70/0x80
[ 36.117244][ T744] dev_uc_add+0x50/0x60
[ 36.118223][ T744] macvlan_open+0x18e/0x1f0 [macvlan]
[ 36.119470][ T744] __dev_open+0xd6/0x170
[ 36.120470][ T744] __dev_change_flags+0x181/0x1d0
[ 36.121644][ T744] dev_change_flags+0x23/0x60
[ 36.122741][ T744] do_setlink+0x30a/0x11e0
[ 36.123778][ T744] ? __lock_acquire+0x92c/0x1f40
[ 36.124929][ T744] ? __nla_validate_parse.part.6+0x45/0x8e0
[ 36.126309][ T744] ? __lock_acquire+0x92c/0x1f40
[ 36.127457][ T744] __rtnl_newlink+0x546/0x8e0
[ 36.128560][ T744] ? lock_acquire+0xb4/0x3b0
[ 36.129623][ T744] ? deactivate_slab.isra.85+0x6a1/0x850
[ 36.130946][ T744] ? __lock_acquire+0x92c/0x1f40
[ 36.132102][ T744] ? lock_acquire+0xb4/0x3b0
[ 36.133176][ T744] ? is_bpf_text_address+0x5/0xe0
[ 36.134364][ T744] ? rtnl_newlink+0x2e/0x70
[ 36.135445][ T744] ? rcu_read_lock_sched_held+0x32/0x60
[ 36.136771][ T744] ? kmem_cache_alloc_trace+0x2d8/0x380
[ 36.138070][ T744] ? rtnl_newlink+0x2e/0x70
[ 36.139164][ T744] rtnl_newlink+0x47/0x70
[ ... ]
Fixes: 845e0ebb44 ("net: change addr_list_lock back to static key")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Functions related to nested interface infrastructure such as
netdev_walk_all_{ upper | lower }_dev() pass both private functions
and "data" pointer to handle their own things.
At this point, the data pointer type is void *.
In order to make it easier to expand common variables and functions,
this new netdev_nested_priv structure is added.
In the following patch, a new member variable will be added into this
struct to fix the lockdep issue.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The netdev_upper_dev_unlink() has to work differently according to flags.
This idea is the same with __netdev_upper_dev_link().
In the following patches, new flags will be added.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All TC actions call tcf_action_check_ctrlact() to validate
goto chain, so this check in tcf_action_init_1() is actually
redundant. Remove it to save troubles of leaking memory.
Fixes: e49d8c22f1 ("net_sched: defer tcf_idr_insert() in tcf_action_init_1()")
Reported-by: Vlad Buslov <vladbu@mellanox.com>
Suggested-by: Davide Caratti <dcaratti@redhat.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add .test_run for raw_tracepoint. Also, introduce a new feature that runs
the target program on a specific CPU. This is achieved by a new flag in
bpf_attr.test, BPF_F_TEST_RUN_ON_CPU. When this flag is set, the program
is triggered on cpu with id bpf_attr.test.cpu. This feature is needed for
BPF programs that handle perf_event and other percpu resources, as the
program can access these resource locally.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200925205432.1777-2-songliubraving@fb.com
Unfortunately recent Intel NIC designs share the UDP port table
across netdevs. So far the UDP tunnel port state was maintained
per netdev, we need to extend that to cater to Intel NICs.
Expect NICs to allocate the info structure dynamically and link
to the state from there. All the shared NICs will record port
offload information in the one instance of the table so we need
to make sure that the use count can accommodate larger numbers.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a user-space software manages fdb entries externally it should
set the ext_learn flag which marks the fdb entry as externally managed
and avoids expiring it (they're treated as static fdbs). Unfortunately
on events where fdb entries are flushed (STP down, netlink fdb flush
etc) these fdbs are also deleted automatically by the bridge. That in turn
causes trouble for the managing user-space software (e.g. in MLAG setups
we lose remote fdb entries on port flaps).
These entries are completely externally managed so we should avoid
automatically deleting them, the only exception are offloaded entries
(i.e. BR_FDB_ADDED_BY_EXT_LEARN + BR_FDB_OFFLOADED). They are flushed as
before.
Fixes: eb100e0e24 ("net: bridge: allow to add externally learned entries from user-space")
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net): ipsec 2020-09-28
1) Fix a build warning in ip_vti if CONFIG_IPV6 is not set.
From YueHaibing.
2) Restore IPCB on espintcp before handing the packet to xfrm
as the information there is still needed.
From Sabrina Dubroca.
3) Fix pmtu updating for xfrm interfaces.
From Sabrina Dubroca.
4) Some xfrm state information was not cloned with xfrm_do_migrate.
Fixes to clone the full xfrm state, from Antony Antony.
5) Use the correct address family in xfrm_state_find. The struct
flowi must always be interpreted along with the original
address family. This got lost over the years.
Fix from Herbert Xu.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix possible crash in socket_release when an out-of-memory error has
occurred in the bind call. If a socket using the XDP_SHARED_UMEM flag
encountered an error in xp_create_and_assign_umem, the bind code
jumped to the exit routine but erroneously forgot to set the err value
before jumping. This meant that the exit routine thought the setup
went well and set the state of the socket to XSK_BOUND. The xsk socket
release code will then, at application exit, think that this is a
properly setup socket, when it is not, leading to a crash when all
fields in the socket have in fact not been initialized properly. Fix
this by setting the err variable in xsk_bind so that the socket is not
set to XSK_BOUND which leads to the clean-up in xsk_release not being
triggered.
Fixes: 1c1efc2af1 ("xsk: Create and free buffer pool independently from umem")
Reported-by: syzbot+ddc7b4944bc61da19b81@syzkaller.appspotmail.com
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/1601112373-10595-1-git-send-email-magnus.karlsson@gmail.com
Allow drivers to request that interface-iterator does NOT iterate
over interfaces that are not sdata-in-driver. This will allow
us to fix crashes in ath10k (and possibly other drivers).
To summarize Johannes' explanation:
Consider
add interface wlan0
add interface wlan1
iterate active interfaces -> wlan0 wlan1
add interface wlan2
iterate active interfaces -> wlan0 wlan1 wlan2
If you apply this scenario to a restart, which ought to be functionally
equivalent to the normal startup, just compressed in time, you're
basically saying that today you get
add interface wlan0
add interface wlan1
iterate active interfaces -> wlan0 wlan1 wlan2 << problem here
add interface wlan2
iterate active interfaces -> wlan0 wlan1 wlan2
which yeah, totally seems wrong.
But fixing that to be
add interface wlan0
add interface wlan1
iterate active interfaces ->
<nothing>
add interface wlan2
iterate active interfaces -> <nothing>
(or
maybe -> wlan0 wlan1 wlan2 if the reconfig already completed)
This is also at least somewhat wrong, but better to not iterate
over something that exists in the driver than iterate over something
that does not. Originally the first issue was causing crashes in
testing with lots of station vdevs on an ath10k radio, combined
with firmware crashing.
I ran with a similar patch for years with no obvious bad results,
including significant testing with ath9k and ath10k.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Link: https://lore.kernel.org/r/20200922191957.25257-1-greearb@candelatech.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The SRG min and max offset won't present when SRG Information Present of
SR control field of Spatial Reuse Parameter Set element set to 0. Per
spec. IEEE802.11ax D7.0, SRG OBSS PD Min Offset ≤ SRG OBSS PD Max
Offset. Hence fix the constrain check to allow same values in both
offset and also call appropriate nla_get function to read the values.
Fixes: 796e90f42b ("cfg80211: add support for parsing OBBS_PD attributes")
Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
Link: https://lore.kernel.org/r/1601278091-20313-1-git-send-email-rmanohar@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The the __freq_reg_info() never returns NULL and the callers don't check
for NULL. This initialization to set "reg_rule = NULL;" is just there
to make GCC happy but it's not required in current GCCs.
The problem is that Smatch sees the initialization and concludes that
this function can return NULL so it complains that the callers are not
checking for it.
Smatch used to be able to parse this correctly but we recently changed
the code from:
- for (bw = MHZ_TO_KHZ(20); bw >= min_bw; bw = bw / 2) {
+ for (bw = MHZ_TO_KHZ(bws[i]); bw >= min_bw; bw = MHZ_TO_KHZ(bws[i--])) {
Originally Smatch used to understand that this code always iterates
through the loop once, but the change from "MHZ_TO_KHZ(20)" to
"MHZ_TO_KHZ(bws[i])" is too complicated for Smatch.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20200923084203.GC1454948@mwanda
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When a frame was acked and probe frames were sent, the connection monitoring
needs to be reset, otherwise it will keep probing until the connection is
considered dead, even though frames have been acked in the mean time.
Fixes: 9abf4e4983 ("mac80211: optimize station connection monitor")
Reported-by: Georgi Valkov <gvalkov@abv.bg>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20200927105605.97954-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Recently channels gained a potential frequency offset, so
include this in the per-channel survey info.
Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200922022818.15855-16-thomas@adapt-ip.com
[add the offset only if non-zero]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The changes required for associating in S1G are:
- apply S1G BSS channel info before assoc
- mark all S1G STAs as QoS STAs
- include and parse AID request element
- handle new Association Response format
- don't fail assoc if supported rates element is missing
Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200922022818.15855-15-thomas@adapt-ip.com
[pass skb to ieee80211_add_aid_request_ie(), remove unused variable 'bss']
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
S1G beacons are 802.11 Extension Frames, so the fixed
header part differs from regular beacons.
Add a handler to process S1G beacons and abstract out the
fetching of BSSID and element start locations in the
beacon body handler.
Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200922022818.15855-14-thomas@adapt-ip.com
[don't rename, small coding style cleanups]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
minstrel_ht is confused by the lack of sband->bitrates,
and S1G will likely require a unique RC algorithm, so
avoid rate init for now if STA is on the S1G band.
Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200922022818.15855-13-thomas@adapt-ip.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
S1G doesn't have legacy (sband->bitrates) rates, only MCS.
For now, just send a frame at MCS 0 if a low rate is
requested. Note we also redefine (since we're out of TX
flags) TX_RC_VHT_MCS as TX_RC_S1G_MCS to indicate an S1G
MCS. This is probably OK as VHT MCS is not valid on S1G
band and vice versa.
Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200922022818.15855-12-thomas@adapt-ip.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For now just skip the duration calculation for frames
transmitted on the S1G band and avoid a warning.
Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200922022818.15855-11-thomas@adapt-ip.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
S1G allows listen interval up to 2^14 * 10000 beacon
intervals. In order to do this listen interval needs a
scaling factor applied to the lower 14 bits. Calculate
this and properly encode the listen interval for S1G STAs.
See IEEE802.11ah-2016 Table 9-44a for reference.
Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200922022818.15855-10-thomas@adapt-ip.com
[move listen_int_usf into function using it]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The sending STA type is implicit based on beacon or probe
response content. If sending STA was an S1G STA, adjust
the Information Element location accordingly.
Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200922022818.15855-9-thomas@adapt-ip.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This commit finds the correct offset for Information
Elements in S1G beacon frames so they can be reported in
scan results.
Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200922022818.15855-8-thomas@adapt-ip.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The S1G beacon is an extension frame as opposed to
management frame for the regular beacon. This means we may
have to occasionally cast the frame buffer to a different
header type. Luckily this isn't too bad as scan results
mostly only care about the IEs.
Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200922022818.15855-6-thomas@adapt-ip.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Include the S1G Capabilities element in an association
request, and support the cfg80211 capability overrides.
Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200922022818.15855-5-thomas@adapt-ip.com
[pass skb to ieee80211_add_s1g_capab_ie(), small code style edits]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
NL80211_ATTR_S1G_CAPABILITY can be passed along with
NL80211_ATTR_S1G_CAPABILITY_MASK to NL80211_CMD_ASSOCIATE
to indicate S1G capabilities which should override the
hardware capabilities in eg. the association request.
Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200922022818.15855-4-thomas@adapt-ip.com
[johannes: always require both attributes together, commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
An S1G BSS can beacon at either 1 or 2 MHz and the channel
width is unique to a given frequency. Ignore scan channel
width for now and use the allowed channel width.
Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200922022818.15855-3-thomas@adapt-ip.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When deleting a channel context, mac80211 would assing
NL80211_CHAN_WIDTH_20_NOHT as the default channel width.
This is wrong in S1G however, so instead get the allowed
channel width for a given channel.
Fixes eg. configuring strange (20Mhz) width during a scan
on the S1G band.
Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200922022818.15855-2-thomas@adapt-ip.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Support 6 GHz scanning, by
* a new scan flag to scan for colocated BSSes advertised
by (and found) APs on 2.4 & 5 GHz
* doing the necessary reduced neighbor report parsing for
this, to find them
* adding the ability to split the scan request in case the
device by itself cannot support this.
Also add some necessary bits in mac80211 to not break with
these changes.
Signed-off-by: Tova Mussai <tova.mussai@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20200918113313.232917c93af9.Ida22f0212f9122f47094d81659e879a50434a6a2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Because we can miss AP wakeup (beacon) while scanning other channels,
it's better go into wakeup state and inform the AP of that upon
returning to the operating channel, rather than staying asleep and
waiting for the next TIM indicating traffic for us.
This saves precious time, especially when we only have 200ms inter-
scan period for monitoring the active connection.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Link: https://lore.kernel.org/r/1593420923-26668-1-git-send-email-loic.poulain@linaro.org
[rewrite commit message a bit]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
After commit d0186842ec ("net: vlan: Avoid using BUG() in
vlan_proto_idx()"), vlan_proto_idx() was changed to return a signed
integer, however one of its called: vlan_group_prealloc_vid() was still
using an unsigned integer for its return value, fix that.
Fixes: d0186842ec ("net: vlan: Avoid using BUG() in vlan_proto_idx()")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove the .flow_dissect procedure, so the flow dissector will call the
generic variant which works for this tagging protocol.
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: DENG Qingfang <dqfext@gmail.com>
Cc: Mauri Sandberg <sandberg@mailfence.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The sja1105 is a bit of a special snowflake, in that not all frames are
transmitted/received in the same way. L2 link-local frames are received
with the source port/switch ID information put in the destination MAC
address. For the rest, a tag_8021q header is used. So only the latter
frames displace the rest of the headers and need to use the generic flow
dissector procedure.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove the .flow_dissect procedure, so the flow dissector will call the
generic variant which works for this tagging protocol.
Cc: John Crispin <john@phrozen.org>
Cc: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove the .flow_dissect procedure, so the flow dissector will call the
generic variant which works for this tagging protocol.
Cc: DENG Qingfang <dqfext@gmail.com>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: John Crispin <john@phrozen.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove the .flow_dissect procedure, so the flow dissector will call the
generic variant which works for this tagging protocol.
Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove the .flow_dissect procedure, so the flow dissector will call the
generic variant which works for this tagging protocol.
Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are 2 Broadcom tags in use, one places the DSA tag before the
Ethernet destination MAC address, and the other before the EtherType.
Nonetheless, both displace the rest of the headers, so this tagger can
use the generic flow dissector procedure which accounts for that.
The ASCII art drawing is a good reference though, so keep it but move it
somewhere else.
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With the recent mitigations against speculative execution exploits,
indirect function calls are more expensive and it would be good to avoid
them where possible.
In the case of DSA, most switch taggers will shift the EtherType and
next headers by a fixed amount equal to that tag's length in bytes.
So we can use a generic procedure to determine that, without calling
into custom tagger code. However we still leave the flow_dissect method
inside struct dsa_device_ops as an override for the generic function.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Marvell 88E6060 uses tag_trailer.c and the KSZ8795, KSZ9477 and
KSZ9893 switches also use tail tags.
Tell that to the DSA core, since this makes a difference for the flow
dissector. Most switches break the parsing of frame headers, but these
ones don't, so no flow dissector adjustment needs to be done for them.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is no tagger that returns anything other than zero, so just change
the return type appropriately.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are 2 goals that we follow:
- Reduce the header size
- Make the header size equal between RX and TX
The issue that required long prefix on RX was the fact that the ocelot
DSA tag, being put before Ethernet as it is, would overlap with the area
that a DSA master uses for RX filtering (destination MAC address
mainly).
Now that we can ask DSA to put the master in promiscuous mode, in theory
we could remove the prefix altogether and call it a day, but it looks
like we can't. Using no prefix on ingress, some packets (such as ICMP)
would be received, while others (such as PTP) would not be received.
This is because the DSA master we use (enetc) triggers parse errors
("MAC rx frame errors") presumably because it sees Ethernet frames with
a bad length. And indeed, when using no prefix, the EtherType (bytes
12-13 of the frame, bits 96-111) falls over the REW_VAL field from the
extraction header, aka the PTP timestamp.
When turning the short (32-bit) prefix on, the EtherType overlaps with
bits 64-79 of the extraction header, which are a reserved area
transmitted as zero by the switch. The packets are not dropped by the
DSA master with a short prefix. Actually, the frames look like this in
tcpdump (below is a PTP frame, with an extra dsa_8021q tag - dadb 0482 -
added by a downstream sja1105).
89:0c:a9:f2:01:00 > 88:80:00:0a:00:1d, 802.3, length 0: LLC, \
dsap Unknown (0x10) Individual, ssap ProWay NM (0x0e) Response, \
ctrl 0x0004: Information, send seq 2, rcv seq 0, \
Flags [Response], length 78
0x0000: 8880 000a 001d 890c a9f2 0100 0000 100f ................
0x0010: 0400 0000 0180 c200 000e 001f 7b63 0248 ............{c.H
0x0020: dadb 0482 88f7 1202 0036 0000 0000 0000 .........6......
0x0030: 0000 0000 0000 0000 0000 001f 7bff fe63 ............{..c
0x0040: 0248 0001 1f81 0500 0000 0000 0000 0000 .H..............
0x0050: 0000 0000 0000 0000 0000 0000 ............
So the short prefix is our new default: we've shortened our RX frames by
12 octets, increased TX by 4, and headers are now equal between RX and
TX. Note that we still need promiscuous mode for the DSA master to not
drop it.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently PTP is broken when ports are in standalone mode (the tagger
keeps printing this message):
sja1105 spi0.1: Expected meta frame, is 01-80-c2-00-00-0e in the DSA master multicast filter?
Sure, one might say "simply add 01-80-c2-00-00-0e to the master's RX
filter" but things become more complicated because:
- Actually all frames in the 01-80-c2-xx-xx-xx and 01-1b-19-xx-xx-xx
range are trapped to the CPU automatically
- The switch mangles bytes 3 and 4 of the MAC address via the incl_srcpt
("include source port [in the DMAC]") option, which is how source port
and switch id identification is done for link-local traffic on RX. But
this means that an address installed to the RX filter would, at the
end of the day, not correspond to the final address seen by the DSA
master.
Assume RX filtering lists on DSA masters are typically too small to
include all necessary addresses for PTP to work properly on sja1105, and
just request promiscuous mode unconditionally.
Just an example:
Assuming the following addresses are trapped to the CPU:
01-80-c2-00-00-00 to 01-80-c2-00-00-ff
01-1b-19-00-00-00 to 01-1b-19-00-00-ff
These are 512 addresses.
Now let's say this is a board with 3 switches, and 4 ports per switch.
The 512 addresses become 6144 addresses that must be managed by the DSA
master's RX filtering lists.
This may be refined in the future, but for now, it is simply not worth
it to add the additional addresses to the master's RX filter, so simply
request it to become promiscuous as soon as the driver probes.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently DSA assumes that taggers don't mess with the destination MAC
address of the frames on RX. That is not always the case. Some DSA
headers are placed before the Ethernet header (ocelot), and others
simply mangle random bytes from the destination MAC address (sja1105
with its incl_srcpt option).
Currently the DSA master goes to promiscuous mode automatically when the
slave devices go too (such as when enslaved to a bridge), but in
standalone mode this is a problem that needs to be dealt with.
So give drivers the possibility to signal that their tagging protocol
will get randomly dropped otherwise, and let DSA deal with fixing that.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sections of device flash may contain settings or device identifying
information. When performing a flash update, it is generally expected
that these settings and identifiers are not overwritten.
However, it may sometimes be useful to allow overwriting these fields
when performing a flash update. Some examples include, 1) customizing
the initial device config on first programming, such as overwriting
default device identifying information, or 2) reverting a device
configuration to known good state provided in the new firmware image, or
3) in case it is suspected that current firmware logic for managing the
preservation of fields during an update is broken.
Although some devices are able to completely separate these types of
settings and fields into separate components, this is not true for all
hardware.
To support controlling this behavior, a new
DEVLINK_ATTR_FLASH_UPDATE_OVERWRITE_MASK is defined. This is an
nla_bitfield32 which will define what subset of fields in a component
should be overwritten during an update.
If no bits are specified, or of the overwrite mask is not provided, then
an update should not overwrite anything, and should maintain the
settings and identifiers as they are in the previous image.
If the overwrite mask has the DEVLINK_FLASH_OVERWRITE_SETTINGS bit set,
then the device should be configured to overwrite any of the settings in
the requested component with settings found in the provided image.
Similarly, if the DEVLINK_FLASH_OVERWRITE_IDENTIFIERS bit is set, the
device should be configured to overwrite any device identifiers in the
requested component with the identifiers from the image.
Multiple overwrite modes may be combined to indicate that a combination
of the set of fields that should be overwritten.
Drivers which support the new overwrite mask must set the
DEVLINK_SUPPORT_FLASH_UPDATE_OVERWRITE_MASK in the
supported_flash_update_params field of their devlink_ops.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The devlink core recently gained support for checking whether the driver
supports a flash_update parameter, via `supported_flash_update_params`.
However, parameters are specified as function arguments. Adding a new
parameter still requires modifying the signature of the .flash_update
callback in all drivers.
Convert the .flash_update function to take a new `struct
devlink_flash_update_params` instead. By using this structure, and the
`supported_flash_update_params` bit field, a new parameter to
flash_update can be added without requiring modification to existing
drivers.
As before, all parameters except file_name will require driver opt-in.
Because file_name is a necessary field to for the flash_update to make
sense, no "SUPPORTED" bitflag is provided and it is always considered
valid. All future additional parameters will require a new bit in the
supported_flash_update_params bitfield.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michael Chan <michael.chan@broadcom.com>
Cc: Bin Luo <luobin9@huawei.com>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Ido Schimmel <idosch@mellanox.com>
Cc: Danielle Ratson <danieller@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When implementing .flash_update, drivers which do not support
per-component update are manually checking the component parameter to
verify that it is NULL. Without this check, the driver might accept an
update request with a component specified even though it will not honor
such a request.
Instead of having each driver check this, move the logic into
net/core/devlink.c, and use a new `supported_flash_update_params` field
in the devlink_ops. Drivers which will support per-component update must
now specify this by setting DEVLINK_SUPPORT_FLASH_UPDATE_COMPONENT in
the supported_flash_update_params in their devlink_ops.
This helps ensure that drivers do not forget to check for a NULL
component if they do not support per-component update. This also enables
a slightly better error message by enabling the core stack to set the
netlink bad attribute message to indicate precisely the unsupported
attribute in the message.
Going forward, any new additional parameter to flash update will require
a bit in the supported_flash_update_params bitfield.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michael Chan <michael.chan@broadcom.com>
Cc: Bin Luo <luobin9@huawei.com>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Ido Schimmel <idosch@mellanox.com>
Cc: Danielle Ratson <danieller@mellanox.com>
Cc: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
tcp_skb_mark_lost is used by RFC6675-SACK and can easily be replaced
with the new tcp_mark_skb_lost handler.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch consolidates and simplifes the loss marking logic used
by a few loss detections (RACK, RFC6675, NewReno). Previously
each detection uses a subset of several intertwined subroutines.
This unncessary complexity has led to bugs (and fixes of bug fixes).
tcp_mark_skb_lost now is the single one routine to mark a packet loss
when a loss detection caller deems an skb ist lost:
1. rewind tp->retransmit_hint_skb if skb has lower sequence or
all lost ones have been retransmitted.
2. book-keeping: adjust flags and counts depending on if skb was
retransmitted or not.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A pure refactor to move tcp_mark_skb_lost to tcp_input.c to prepare
for the later loss marking consolidation.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tcp_simple_retransmit() used for path MTU discovery may not adjust
the retransmit hint properly by deducting retrans_out before checking
it to adjust the hint. This patch fixes this by a correct routine
tcp_mark_skb_lost() already used by the RACK loss detection.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We should remove a group from the sg_port hash only if it's an S,G
entry. This makes it correct and more symmetric with group add. Also
since *,G groups are not added to that hash we can hide a bug.
Fixes: 085b53c8be ("net: bridge: mcast: add sg_port rhashtable")
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Is it just me, or is the logic written in a slightly convoluted way?
I find it a little easier to read this way.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
seq_puts is a lot cheaper than seq_printf, so use that to print
literal strings.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Reserving space for a large READ payload requires special handling when
reserving space in the xdr buffer pages. One problem we can have is use
of the scratch buffer, which is used to get a pointer to a contiguous
region of data up to PAGE_SIZE. When using the scratch buffer, calls to
xdr_commit_encode() shift the data to it's proper alignment in the xdr
buffer. If we've reserved several pages in a vector, then this could
potentially invalidate earlier pointers and result in incorrect READ
data being sent to the client.
I get around this by looking at the amount of space left in the current
page, and never reserve more than that for each entry in the read
vector. This lets us place data directly where it needs to go in the
buffer pages.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Drop duplicate words in net/sunrpc/.
Also fix "Anyone" to be "Any one".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: linux-nfs@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
While we should always make sure that we specify a valid VLAN protocol
to vlan_proto_idx(), killing the machine when an invalid value is
specified is too harsh and not helpful for debugging. All callers are
capable of dealing with an error returned by vlan_proto_idx() so check
the index value and propagate it accordingly.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch changes the bpf_sk_assign() to take
ARG_PTR_TO_BTF_ID_SOCK_COMMON such that they will work with the pointer
returned by the bpf_skc_to_*() helpers also.
The bpf_sk_lookup_assign() is taking ARG_PTR_TO_SOCKET_"OR_NULL". Meaning
it specifically takes a literal NULL. ARG_PTR_TO_BTF_ID_SOCK_COMMON
does not allow a literal NULL, so another ARG type is required
for this purpose and another follow-up patch can be used if
there is such need.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200925000415.3857374-1-kafai@fb.com
This patch changes the bpf_tcp_*_syncookie() to take
ARG_PTR_TO_BTF_ID_SOCK_COMMON such that they will work with the pointer
returned by the bpf_skc_to_*() helpers also.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Lorenz Bauer <lmb@cloudflare.com>
Link: https://lore.kernel.org/bpf/20200925000409.3856725-1-kafai@fb.com
This patch changes the bpf_sk_storage_*() to take
ARG_PTR_TO_BTF_ID_SOCK_COMMON such that they will work with the pointer
returned by the bpf_skc_to_*() helpers also.
A micro benchmark has been done on a "cgroup_skb/egress" bpf program
which does a bpf_sk_storage_get(). It was driven by netperf doing
a 4096 connected UDP_STREAM test with 64bytes packet.
The stats from "kernel.bpf_stats_enabled" shows no meaningful difference.
The sk_storage_get_btf_proto, sk_storage_delete_btf_proto,
btf_sk_storage_get_proto, and btf_sk_storage_delete_proto are
no longer needed, so they are removed.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Lorenz Bauer <lmb@cloudflare.com>
Link: https://lore.kernel.org/bpf/20200925000402.3856307-1-kafai@fb.com
The previous patch allows the networking bpf prog to use the
bpf_skc_to_*() helpers to get a PTR_TO_BTF_ID socket pointer,
e.g. "struct tcp_sock *". It allows the bpf prog to read all the
fields of the tcp_sock.
This patch changes the bpf_sk_release() and bpf_sk_*cgroup_id()
to take ARG_PTR_TO_BTF_ID_SOCK_COMMON such that they will
work with the pointer returned by the bpf_skc_to_*() helpers
also. For example, the following will work:
sk = bpf_skc_lookup_tcp(skb, tuple, tuplen, BPF_F_CURRENT_NETNS, 0);
if (!sk)
return;
tp = bpf_skc_to_tcp_sock(sk);
if (!tp) {
bpf_sk_release(sk);
return;
}
lsndtime = tp->lsndtime;
/* Pass tp to bpf_sk_release() will also work */
bpf_sk_release(tp);
Since PTR_TO_BTF_ID could be NULL, the helper taking
ARG_PTR_TO_BTF_ID_SOCK_COMMON has to check for NULL at runtime.
A btf_id of "struct sock" may not always mean a fullsock. Regardless
the helper's running context may get a non-fullsock or not,
considering fullsock check/handling is pretty cheap, it is better to
keep the same verifier expectation on helper that takes ARG_PTR_TO_BTF_ID*
will be able to handle the minisock situation. In the bpf_sk_*cgroup_id()
case, it will try to get a fullsock by using sk_to_full_sk() as its
skb variant bpf_sk"b"_*cgroup_id() has already been doing.
bpf_sk_release can already handle minisock, so nothing special has to
be done.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200925000356.3856047-1-kafai@fb.com
There is a constant need to add more fields into the bpf_tcp_sock
for the bpf programs running at tc, sock_ops...etc.
A current workaround could be to use bpf_probe_read_kernel(). However,
other than making another helper call for reading each field and missing
CO-RE, it is also not as intuitive to use as directly reading
"tp->lsndtime" for example. While already having perfmon cap to do
bpf_probe_read_kernel(), it will be much easier if the bpf prog can
directly read from the tcp_sock.
This patch tries to do that by using the existing casting-helpers
bpf_skc_to_*() whose func_proto returns a btf_id. For example, the
func_proto of bpf_skc_to_tcp_sock returns the btf_id of the
kernel "struct tcp_sock".
These helpers are also added to is_ptr_cast_function().
It ensures the returning reg (BPF_REF_0) will also carries the ref_obj_id.
That will keep the ref-tracking works properly.
The bpf_skc_to_* helpers are made available to most of the bpf prog
types in filter.c. The bpf_skc_to_* helpers will be limited by
perfmon cap.
This patch adds a ARG_PTR_TO_BTF_ID_SOCK_COMMON. The helper accepting
this arg can accept a btf-id-ptr (PTR_TO_BTF_ID + &btf_sock_ids[BTF_SOCK_TYPE_SOCK_COMMON])
or a legacy-ctx-convert-skc-ptr (PTR_TO_SOCK_COMMON). The bpf_skc_to_*()
helpers are changed to take ARG_PTR_TO_BTF_ID_SOCK_COMMON such that
they will accept pointer obtained from skb->sk.
Instead of specifying both arg_type and arg_btf_id in the same func_proto
which is how the current ARG_PTR_TO_BTF_ID does, the arg_btf_id of
the new ARG_PTR_TO_BTF_ID_SOCK_COMMON is specified in the
compatible_reg_types[] in verifier.c. The reason is the arg_btf_id is
always the same. Discussion in this thread:
https://lore.kernel.org/bpf/20200922070422.1917351-1-kafai@fb.com/
The ARG_PTR_TO_BTF_ID_ part gives a clear expectation that the helper is
expecting a PTR_TO_BTF_ID which could be NULL. This is the same
behavior as the existing helper taking ARG_PTR_TO_BTF_ID.
The _SOCK_COMMON part means the helper is also expecting the legacy
SOCK_COMMON pointer.
By excluding the _OR_NULL part, the bpf prog cannot call helper
with a literal NULL which doesn't make sense in most cases.
e.g. bpf_skc_to_tcp_sock(NULL) will be rejected. All PTR_TO_*_OR_NULL
reg has to do a NULL check first before passing into the helper or else
the bpf prog will be rejected. This behavior is nothing new and
consistent with the current expectation during bpf-prog-load.
[ ARG_PTR_TO_BTF_ID_SOCK_COMMON will be used to replace
ARG_PTR_TO_SOCK* of other existing helpers later such that
those existing helpers can take the PTR_TO_BTF_ID returned by
the bpf_skc_to_*() helpers.
The only special case is bpf_sk_lookup_assign() which can accept a
literal NULL ptr. It has to be handled specially in another follow
up patch if there is a need (e.g. by renaming ARG_PTR_TO_SOCKET_OR_NULL
to ARG_PTR_TO_BTF_ID_SOCK_COMMON_OR_NULL). ]
[ When converting the older helpers that take ARG_PTR_TO_SOCK* in
the later patch, if the kernel does not support BTF,
ARG_PTR_TO_BTF_ID_SOCK_COMMON will behave like ARG_PTR_TO_SOCK_COMMON
because no reg->type could have PTR_TO_BTF_ID in this case.
It is not a concern for the newer-btf-only helper like the bpf_skc_to_*()
here though because these helpers must require BTF vmlinux to begin
with. ]
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200925000350.3855720-1-kafai@fb.com
This checks if BT_HS is enabled relecting it on MGMT_SETTING_HS instead
of always reporting it as supported.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Bluetooth High Speed requires hardware support which is very uncommon
nowadays since HS has not pickup interest by the industry.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Only sockets will have the chan->data set to an actual sk, channels
like A2MP would have its own data which would likely cause a crash when
calling sk_filter, in order to fix this a new callback has been
introduced so channels can implement their own filtering if necessary.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This fixes various places where a stack variable is used uninitialized.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
During system powercycle when trying to get the random address
hci_get_random_address set own_addr_type as 0x01. In which if we enable
ll_privacy it is supposed to be 0x03.
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The struct flowi must never be interpreted by itself as its size
depends on the address family. Therefore it must always be grouped
with its original family value.
In this particular instance, the original family value is lost in
the function xfrm_state_find. Therefore we get a bogus read when
it's coupled with the wrong family which would occur with inter-
family xfrm states.
This patch fixes it by keeping the original family value.
Note that the same bug could potentially occur in LSM through
the xfrm_state_pol_flow_match hook. I checked the current code
there and it seems to be safe for now as only secid is used which
is part of struct flowi_common. But that API should be changed
so that so that we don't get new bugs in the future. We could
do that by replacing fl with just secid or adding a family field.
Reported-by: syzbot+577fbac3145a6eb2e7a5@syzkaller.appspotmail.com
Fixes: 48b8d78315 ("[XFRM]: State selection update to use inner...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Since commit cfde141ea3 ("mptcp: move option parsing into
mptcp_incoming_options()"), the 3rd function argument is no longer used.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, we use length of DSACKed range to compute number of
delivered packets. And if sequence range in DSACK is corrupted,
we can get bogus dsacked/acked count, and bogus cwnd.
This patch put bounds on DSACKed range to skip update of data
delivery and spurious retransmission information, if the DSACK
is unlikely caused by sender's action:
- DSACKed range shouldn't be greater than maximum advertised rwnd.
- Total no. of DSACKed segments shouldn't be greater than total
no. of retransmitted segs. Unlike spurious retransmits, network
duplicates or corrupted DSACKs shouldn't be counted as delivery.
Signed-off-by: Priyaranjan Jha <priyarjha@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch implemented the retransmition of ADD_ADDR when no ADD_ADDR echo
is received. It added a timer with the announced address. When timeout
occurs, ADD_ADDR will be retransmitted.
Suggested-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a new helper sk_stop_timer_sync, it deactivates a timer
like sk_stop_timer, but waits for the handler to finish.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new struct mptcp_pm_add_entry to describe add_addr's entry.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a new helper named mptcp_destroy_common containing the
shared code between mptcp_destroy() and mptcp_sock_destruct().
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added two new mibs for RM_ADDR, named MPTCP_MIB_RMADDR and
MPTCP_MIB_RMSUBFLOW, when the RM_ADDR suboption is received, increase
the first mib counter, when the local subflow is removed, increase the
second mib counter.
Suggested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Suggested-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch implemented the local subflow removing function,
mptcp_pm_remove_subflow, it simply called mptcp_pm_nl_rm_subflow_received
under the PM spin lock.
We use mptcp_pm_remove_subflow to remove a local subflow, so change it's
argument from remote_id to local_id.
We check subflow->local_id in mptcp_pm_nl_rm_subflow_received to remove
a subflow.
Suggested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Suggested-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch implements the remove announced addr and subflow logic in PM
netlink.
When the PM netlink removes an address, we traverse all the existing msk
sockets to find the relevant sockets.
We add a new list named anno_list in mptcp_pm_data, to record all the
announced addrs. In the traversing, we check if it has been recorded.
If it has been, we trigger the RM_ADDR signal.
We also check if this address is in conn_list. If it is, we remove the
subflow which using this local address.
Since we call mptcp_pm_free_anno_list in mptcp_destroy, we need to move
__mptcp_init_sock before the mptcp_is_enabled check in mptcp_init_sock.
Suggested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Suggested-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The re-check of pm->accept_subflow with pm->lock held was missing, this
patch fixed it.
Suggested-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added two mibs for ADD_ADDR, MPTCP_MIB_ADDADDR for receiving
of the ADD_ADDR suboption with echo-flag=0, and MPTCP_MIB_ECHOADD for
receiving the ADD_ADDR suboption with echo-flag=1.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the ADD_ADDR suboption has been received, we need to send out the same
ADD_ADDR suboption with echo-flag=1, and no HMAC.
Suggested-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added the RM_ADDR option parsing logic:
We parsed the incoming options to find if the rm_addr option is received,
and called mptcp_pm_rm_addr_received to schedule PM work to a new status,
named MPTCP_PM_RM_ADDR_RECEIVED.
PM work got this status, and called mptcp_pm_nl_rm_addr_received to handle
it.
In mptcp_pm_nl_rm_addr_received, we closed the subflow matching the rm_id,
and updated PM counter.
Suggested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Suggested-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a new signal named rm_addr_signal in PM. On outgoing path,
we called mptcp_pm_should_rm_signal to check if rm_addr_signal has been
set. If it has been, we sent out the RM_ADDR option.
Suggested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch renamed addr_signal and the related functions with the explicit
word "add".
Suggested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, ocelot switchdev passes the skb directly to the function that
enqueues it to the list of skb's awaiting a TX timestamp. Whereas the
felix DSA driver first clones the skb, then passes the clone to this
queue.
This matters because in the case of felix, the common IRQ handler, which
is ocelot_get_txtstamp(), currently clones the clone, and frees the
original clone. This is useless and can be simplified by using
skb_complete_tx_timestamp() instead of skb_tstamp_tx().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
syzbot is able to trigger a failure case inside the loop in
tcf_action_init(), and when this happens we clean up with
tcf_action_destroy(). But, as these actions are already inserted
into the global IDR, other parallel process could free them
before tcf_action_destroy(), then we will trigger a use-after-free.
Fix this by deferring the insertions even later, after the loop,
and committing all the insertions in a separate loop, so we will
never fail in the middle of the insertions any more.
One side effect is that the window between alloction and final
insertion becomes larger, now it is more likely that the loop in
tcf_del_walker() sees the placeholder -EBUSY pointer. So we have
to check for error pointer in tcf_del_walker().
Reported-and-tested-by: syzbot+2287853d392e4b42374a@syzkaller.appspotmail.com
Fixes: 0190c1d452 ("net: sched: atomically check-allocate action")
Cc: Vlad Buslov <vladbu@mellanox.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All TC actions call tcf_idr_insert() for new action at the end
of their ->init(), so we can actually move it to a central place
in tcf_action_init_1().
And once the action is inserted into the global IDR, other parallel
process could free it immediately as its refcnt is still 1, so we can
not fail after this, we need to move it after the goto action
validation to avoid handling the failure case after insertion.
This is found during code review, is not directly triggered by syzbot.
And this prepares for the next patch.
Cc: Vlad Buslov <vladbu@mellanox.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Provide compat_xfrm_userpolicy_info translation for xfrm setsocketopt().
Reallocate buffer and put the missing padding for 64-bit message.
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Provide the user-to-kernel translator under XFRM_USER_COMPAT, that
creates for 32-bit xfrm-user message a 64-bit translation.
The translation is afterwards reused by xfrm_user code just as if
userspace had sent 64-bit message.
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Modules those use netlink may supply a 2nd skb, (via frag_list)
that contains an alternative data set meant for applications
using 32bit compatibility mode.
In such a case, netlink_recvmsg will use this 2nd skb instead of the
original one.
Without this patch, such compat applications will retrieve
all netlink dump data, but will then get an unexpected EOF.
Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Currently nlmsg_unicast() is used by functions that dump structures that
can be different in size for compat tasks, see dump_one_state() and
dump_one_policy().
The following nlmsg_unicast() users exist today in xfrm:
Function | Message can be different
| in size on compat
-------------------------------------------|------------------------------
xfrm_get_spdinfo() | N
xfrm_get_sadinfo() | N
xfrm_get_sa() | Y
xfrm_alloc_userspi() | Y
xfrm_get_policy() | Y
xfrm_get_ae() | N
Besides, dump_one_state() and dump_one_policy() can be used by filtered
netlink dump for XFRM_MSG_GETSA, XFRM_MSG_GETPOLICY.
Just as for xfrm multicast, allocate frag_list for compat skb journey
down to recvmsg() which will give user the desired skb according to
syscall bitness.
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Provide the kernel-to-user translator under XFRM_USER_COMPAT, that
creates for 64-bit xfrm-user message a 32-bit translation and puts it
in skb's frag_list. net/compat.c layer provides MSG_CMSG_COMPAT to
decide if the message should be taken from skb or frag_list.
(used by wext-core which has also an ABI difference)
Kernel sends 64-bit xfrm messages to the userspace for:
- multicast (monitor events)
- netlink dumps
Wire up the translator to xfrm_nlmsg_multicast().
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Add a skeleton for xfrm_compat module and provide API to register it in
xfrm_state.ko. struct xfrm_translator will have function pointers to
translate messages received from 32-bit userspace or to be sent to it
from 64-bit kernel.
module_get()/module_put() are used instead of rcu_read_lock() as the
module will vmalloc() memory for translation.
The new API is registered with xfrm_state module, not with xfrm_user as
the former needs translator for user_policy set by setsockopt() and
xfrm_user already uses functions from xfrm_state.
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Update the B53 driver to support VLANs while not filtering. This
requires us to enable VLAN globally within the switch upon driver
initial configuration (dev->vlan_enabled).
We also need to remove the code that dealt with PVID re-configuration in
b53_vlan_filtering() since that function worked under the assumption
that it would only be called to make a bridge VLAN filtering, or not
filtering, and we would attempt to move the port's PVID accordingly.
Now that VLANs are programmed all the time, even in the case of a
non-VLAN filtering bridge, we would be programming a default_pvid for
the bridged switch ports.
We need the DSA receive path to pop the VLAN tag if it is the bridge's
default_pvid because the CPU port is always programmed tagged in the
programmed VLANs. In order to do so we utilize the
dsa_untag_bridge_pvid() helper introduced in the commit before within
net/dsa/tag_brcm.c.
Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the bridge untags VLANs present in its VLAN groups in
__allowed_ingress() only when VLAN filtering is enabled.
But when a skb is seen on the RX path as tagged with the bridge's pvid,
and that bridge has vlan_filtering=0, and there isn't any 8021q upper
with that VLAN either, then we have a problem. The bridge will not untag
it (since it is supposed to remain VLAN-unaware), and pvid-tagged
communication will be broken.
There are 2 situations where we can end up like that:
1. When installing a pvid in egress-tagged mode, like this:
ip link add dev br0 type bridge vlan_filtering 0
ip link set swp0 master br0
bridge vlan del dev swp0 vid 1
bridge vlan add dev swp0 vid 1 pvid
This happens because DSA configures the VLAN membership of the CPU port
using the same flags as swp0 (in this case "pvid and not untagged"), in
an attempt to copy the frame as-is from ingress to the CPU.
However, in this case, the packet may arrive untagged on ingress, it
will be pvid-tagged by the ingress port, and will be sent as
egress-tagged towards the CPU. Otherwise stated, the CPU will see a VLAN
tag where there was none to speak of on ingress.
When vlan_filtering is 1, this is not a problem, as stated in the first
paragraph, because __allowed_ingress() will pop it. But currently, when
vlan_filtering is 0 and we have such a VLAN configuration, we need an
8021q upper (br0.1) to be able to ping over that VLAN, which is not
symmetrical with the vlan_filtering=1 case, and therefore, confusing for
users.
Basically what DSA attempts to do is simply an approximation: try to
copy the skb with (or without) the same VLAN all the way up to the CPU.
But DSA drivers treat CPU port VLAN membership in various ways (which is
a good segue into situation 2). And some of those drivers simply tell
the CPU port to copy the frame unmodified, which is the golden standard
when it comes to VLAN processing (therefore, any driver which can
configure the hardware to do that, should do that, and discard the VLAN
flags requested by DSA on the CPU port).
2. Some DSA drivers always configure the CPU port as egress-tagged, in
an attempt to recover the classified VLAN from the skb. These drivers
cannot work at all with untagged traffic when bridged in
vlan_filtering=0 mode. And they can't go for the easy "just keep the
pvid as egress-untagged towards the CPU" route, because each front port
can have its own pvid, and that might require conflicting VLAN
membership settings on the CPU port (swp1 is pvid for VID 1 and
egress-tagged for VID 2; swp2 is egress-taggeed for VID 1 and pvid for
VID 2; with this simplistic approach, the CPU port, which is really a
separate hardware entity and has its own VLAN membership settings, would
end up being egress-untagged in both VID 1 and VID 2, therefore losing
the VLAN tags of ingress traffic).
So the only thing we can do is to create a helper function for resolving
the problematic case (that is, a function which untags the bridge pvid
when that is in vlan_filtering=0 mode), which taggers in need should
call. It isn't called from the generic DSA receive path because there
are drivers that fall neither in the first nor second category.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update kernel-doc line comments to fix warnings reported by make W=1.
net/switchdev/switchdev.c:413: warning: Function parameter or
member 'extack' not described in 'call_switchdev_notifiers'
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Acked-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
kernel-doc expects the function prototype to be just after
the kernel-doc markup, as otherwise it will get it all wrong:
./net/core/dev.c:10036: warning: Excess function parameter 'dev' description in 'WAIT_REFS_MIN_MSECS'
Fixes: 0e4be9e57e ("net: use exponential backoff in netdev_wait_allrefs")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When receiving a DATA_FIN MPTCP option on a TCP FIN packet, the DATA_FIN
information would be stored but the MPTCP worker did not get
scheduled. In turn, the MPTCP socket state would remain in
TCP_ESTABLISHED and no blocked operations would be awakened.
TCP FIN packets are seen by the MPTCP socket when moving skbs out of the
subflow receive queues, so schedule the MPTCP worker when a skb with
DATA_FIN but no data payload is moved from a subflow queue. Other cases
(DATA_FIN on a bare TCP ACK or on a packet with data payload) are
already handled.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/84
Fixes: 43b54c6ee3 ("mptcp: Use full MPTCP-level disconnect state machine")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
We need to avoid forwarding to ports in MCAST_INCLUDE filter mode when the
mdst entry is a *,G or when the port has the blocked flag.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since host joins are considered as EXCLUDE {} joins we need to reflect
that in all of *,G ports' S,G entries. Since the S,Gs can have
host_joined == true only set automatically we can safely set it to false
when removing all automatically added entries upon S,G delete.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When excluding S,G entries we need a way to block a particular S,G,port.
The new port group flag is managed based on the source's timer as per
RFCs 3376 and 3810. When a source expires and its port group is in
EXCLUDE mode, it will be blocked.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We need to handle group filter mode transitions and initial state.
To change a port group's INCLUDE -> EXCLUDE mode (or when we have added
a new port group in EXCLUDE mode) we need to add that port to all of
*,G ports' S,G entries for proper replication. When the EXCLUDE state is
changed from IGMPv3 report, br_multicast_fwd_filter_exclude() must be
called after the source list processing because the assumption is that
all of the group's S,G entries will be created before transitioning to
EXCLUDE mode, i.e. most importantly its blocked entries will already be
added so it will not get automatically added to them.
The transition EXCLUDE -> INCLUDE happens only when a port group timer
expires, it requires us to remove that port from all of *,G ports' S,G
entries where it was automatically added previously.
Finally when we are adding a new S,G entry we must add all of *,G's
EXCLUDE ports to it.
In order to distinguish automatically added *,G EXCLUDE ports we have a
new port group flag - MDB_PG_FLAGS_STAR_EXCL.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds support for automatic install of S,G mdb entries based
on the port group's source list and the source entry's timer.
Once installed the S,G will be used when forwarding packets if the
approprate multicast/mld versions are set. A new source flag called
BR_SGRP_F_INSTALLED denotes if the source has a forwarding mdb entry
installed.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To speedup S,G forward handling we need to be able to quickly find out
if a port is a member of an S,G group. To do that add a global S,G port
rhashtable with key: source addr, group addr, protocol, vid (all br_ip
fields) and port pointer.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We need to be able to differentiate between pg entries created by
user-space and the kernel when we start generating S,G entries for
IGMPv3/MLDv2's fast path. User-space entries are created by default as
RTPROT_STATIC and the kernel entries are RTPROT_KERNEL. Later we can
allow user-space to provide the entry rt_protocol so we can
differentiate between who added the entries specifically (e.g. clag,
admin, frr etc).
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If (S,G) entries are enabled (igmpv3/mldv2) then look them up first. If
there isn't a present (S,G) entry then try to find (*,G).
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add new mdb attributes (MDBE_ATTR_SOURCE for setting,
MDBA_MDB_EATTR_SOURCE for dumping) to allow add/del and dump of mdb
entries with a source address (S,G). New S,G entries are created with
filter mode of MCAST_INCLUDE. The same attributes are used for IPv4 and
IPv6, they're validated and parsed based on their protocol.
S,G host joined entries which are added by user are not allowed yet.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the MDB add/del code expects an exact struct br_mdb_entry we can't
really add any extensions, thus add a new nested attribute at the level of
MDBA_SET_ENTRY called MDBA_SET_ENTRY_ATTRS which will be used to pass
all new options via netlink attributes. This patch doesn't change
anything functionally since the new attribute is not used yet, only
parsed.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since now we have src in br_ip, u no longer makes sense so rename
it to dst. No functional changes.
v2: fix build with CONFIG_BATMAN_ADV_MCAST
CC: Marek Lindner <mareklindner@neomailbox.ch>
CC: Simon Wunderlich <sw@simonwunderlich.de>
CC: Antonio Quartulli <a@unstable.cc>
CC: Sven Eckelmann <sven@narfation.org>
CC: b.a.t.m.a.n@lists.open-mesh.org
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that we have src and dst in br_ip it is logical to use the src field
for the cases where we need to work with a source address such as
querier source address and group source address.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass and use extack all the way down to br_mdb_add_group().
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To avoid doing duplicate device checks and searches (the same were done
in br_mdb_add and __br_mdb_add) pass the already found port to __br_mdb_add
and pull the bridge's netif_running and enabled multicast checks to
br_mdb_add. This would also simplify the future extack errors.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can drop the pr_info() calls and just use extack to return a
meaningful error to user-space when br_mdb_parse() fails.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-09-23
The following pull-request contains BPF updates for your *net-next* tree.
We've added 95 non-merge commits during the last 22 day(s) which contain
a total of 124 files changed, 4211 insertions(+), 2040 deletions(-).
The main changes are:
1) Full multi function support in libbpf, from Andrii.
2) Refactoring of function argument checks, from Lorenz.
3) Make bpf_tail_call compatible with functions (subprograms), from Maciej.
4) Program metadata support, from YiFei.
5) bpf iterator optimizations, from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Use range checking facility of nla_policy to validate port type
attribute input value is valid or not.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use range checking facility of nla_policy to validate eswitch mode input
attribute value is valid or not.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Two minor conflicts:
1) net/ipv4/route.c, adding a new local variable while
moving another local variable and removing it's
initial assignment.
2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes.
One pretty prints the port mode differently, whilst another
changes the driver to try and obtain the port mode from
the port node rather than the switch node.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from Jakub Kicinski:
- fix failure to add bond interfaces to a bridge, the offload-handling
code was too defensive there and recent refactoring unearthed that.
Users complained (Ido)
- fix unnecessarily reflecting ECN bits within TOS values / QoS marking
in TCP ACK and reset packets (Wei)
- fix a deadlock with bpf iterator. Hopefully we're in the clear on
this front now... (Yonghong)
- BPF fix for clobbering r2 in bpf_gen_ld_abs (Daniel)
- fix AQL on mt76 devices with FW rate control and add a couple of AQL
issues in mac80211 code (Felix)
- fix authentication issue with mwifiex (Maximilian)
- WiFi connectivity fix: revert IGTK support in ti/wlcore (Mauro)
- fix exception handling for multipath routes via same device (David
Ahern)
- revert back to a BH spin lock flavor for nsid_lock: there are paths
which do require the BH context protection (Taehee)
- fix interrupt / queue / NAPI handling in the lantiq driver (Hauke)
- fix ife module load deadlock (Cong)
- make an adjustment to netlink reply message type for code added in
this release (the sole change touching uAPI here) (Michal)
- a number of fixes for small NXP and Microchip switches (Vladimir)
[ Pull request acked by David: "you can expect more of this in the
future as I try to delegate more things to Jakub" ]
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (167 commits)
net: mscc: ocelot: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries
net: dsa: seville: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries
net: dsa: felix: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries
inet_diag: validate INET_DIAG_REQ_PROTOCOL attribute
net: bridge: br_vlan_get_pvid_rcu() should dereference the VLAN group under RCU
net: Update MAINTAINERS for MediaTek switch driver
net/mlx5e: mlx5e_fec_in_caps() returns a boolean
net/mlx5e: kTLS, Avoid kzalloc(GFP_KERNEL) under spinlock
net/mlx5e: kTLS, Fix leak on resync error flow
net/mlx5e: kTLS, Add missing dma_unmap in RX resync
net/mlx5e: kTLS, Fix napi sync and possible use-after-free
net/mlx5e: TLS, Do not expose FPGA TLS counter if not supported
net/mlx5e: Fix using wrong stats_grps in mlx5e_update_ndo_stats()
net/mlx5e: Fix multicast counter not up-to-date in "ip -s"
net/mlx5e: Fix endianness when calculating pedit mask first bit
net/mlx5e: Enable adding peer miss rules only if merged eswitch is supported
net/mlx5e: CT: Fix freeing ct_label mapping
net/mlx5e: Fix memory leak of tunnel info when rule under multipath not ready
net/mlx5e: Use synchronize_rcu to sync with NAPI
net/mlx5e: Use RCU to protect rq->xdp_prog
...
When calling the RCU brother of br_vlan_get_pvid(), lockdep warns:
=============================
WARNING: suspicious RCU usage
5.9.0-rc3-01631-g13c17acb8e38-dirty #814 Not tainted
-----------------------------
net/bridge/br_private.h:1054 suspicious rcu_dereference_protected() usage!
Call trace:
lockdep_rcu_suspicious+0xd4/0xf8
__br_vlan_get_pvid+0xc0/0x100
br_vlan_get_pvid_rcu+0x78/0x108
The warning is because br_vlan_get_pvid_rcu() calls nbp_vlan_group()
which calls rtnl_dereference() instead of rcu_dereference(). In turn,
rtnl_dereference() calls rcu_dereference_protected() which assumes
operation under an RCU write-side critical section, which obviously is
not the case here. So, when the incorrect primitive is used to access
the RCU-protected VLAN group pointer, READ_ONCE() is not used, which may
cause various unexpected problems.
I'm sad to say that br_vlan_get_pvid() and br_vlan_get_pvid_rcu() cannot
share the same implementation. So fix the bug by splitting the 2
functions, and making br_vlan_get_pvid_rcu() retrieve the VLAN groups
under proper locking annotations.
Fixes: 7582f5b70f ("bridge: add br_vlan_get_pvid_rcu()")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
They are not used since commit e4ff675130 ("ipvs: add
sync_maxlen parameter for the sync daemon")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Rename 'searched' column to 'clashres' (same len).
conntrack(8) using the old /proc interface (ctnetlink not available) shows:
cpu=0 entries=4784 clashres=2292 [..]
Another alternative is to add another column, but this increases the
number of always-0 columns.
Fixes: bc92470413 ("netfilter: conntrack: add clash resolution stat counter")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
If a bucket contains a lot of sockets, during bpf_iter traversing
a bucket, concurrent userspace bpf_map_update_elem() and
bpf program bpf_sk_storage_{get,delete}() may experience
some undesirable delays as they will compete with bpf_iter
for bucket lock.
Note that the number of buckets for bpf_sk_storage_map
is roughly the same as the number of cpus. So if there
are lots of sockets in the system, each bucket could
contain lots of sockets.
Different actual use cases may experience different delays.
Here, using selftest bpf_iter subtest bpf_sk_storage_map,
I hacked the kernel with ktime_get_mono_fast_ns()
to collect the time when a bucket was locked
during bpf_iter prog traversing that bucket. This way,
the maximum incurred delay was measured w.r.t. the
number of elements in a bucket.
# elems in each bucket delay(ns)
64 17000
256 72512
2048 875246
The potential delays will be further increased if
we have even more elemnts in a bucket. Using rcu_read_lock()
is a reasonable compromise here. It may lose some precision, e.g.,
access stale sockets, but it will not hurt performance of
bpf program or user space application which also tries
to get/delete or update map elements.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200916224645.720172-1-yhs@fb.com
Function prototypes using ARG_PTR_TO_BTF_ID currently use two ways to signal
which BTF IDs are acceptable. First, bpf_func_proto.btf_id is an array of
IDs, one for each argument. This array is only accessed up to the highest
numbered argument that uses ARG_PTR_TO_BTF_ID and may therefore be less than
five arguments long. It usually points at a BTF_ID_LIST. Second, check_btf_id
is a function pointer that is called by the verifier if present. It gets the
actual BTF ID of the register, and the argument number we're currently checking.
It turns out that the only user check_arg_btf_id ignores the argument, and is
simply used to check whether the BTF ID has a struct sock_common at it's start.
Replace both of these mechanisms with an explicit BTF ID for each argument
in a function proto. Thanks to btf_struct_ids_match this is very flexible:
check_arg_btf_id can be replaced by requiring struct sock_common.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200921121227.255763-5-lmb@cloudflare.com
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEK3kIWJt9yTYMP3ehqclaivrt76kFAl9onIcTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRCpyVqK+u3vqf2aCACpwHz9PLKTX4zNDnDRsA7x4c+Gk2nU
FOgwodyk9ayax1lLYkgq3ynlb5zM4tRNKLJguoJX69pVvw87uPwBhEbQWQkFFZoW
ErkAmYgzGeoA2bu/iJnbsktm7uyEv5a5SntZ+3DSfdnJhuZoU2WfgGa0Z6yDYlWG
W6/Dy66XGKzCrK1iFOyvvaNDOhS+Jkul1JWcyhrztQeCbIPTiqVztaE/QA+5cDoT
ScO4LdHx7U49XQMiNUjrHFv8qso7fVPicqnefWb19w22wixPzUSGNjCOk284qLn9
eldxYwN77sC8VzPIiyKv7sW8z1o+lq1uTeO5Aa+ATqhCdwTmeNIVfJsp
=C8ET
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-5.10-20200921' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2020-09-21
this is a pull request of 38 patches for net-next.
the first 5 patches are by Colin Ian King, Alexandre Belloni and me and they
fix various spelling mistakes.
The next patch is by me and fixes the indention in the CAN raw protocol
according to the kernel coding style.
Diego Elio Pettenò contributes two patches to fix dead links in CAN's Kconfig.
Masahiro Yamada's patch removes the "WITH Linux-syscall-note" from SPDX tag of
C files.
AThe next 4 patches are by me and target the CAN device infrastructure and add
error propagation and improve the output of various messages to ease driver
development and debugging.
YueHaibing's patch for the c_can driver removes an unused inline function.
Next follows another patch by Colin Ian King, which removes the unneeded
initialization of a variable in the mcba_usb driver.
A patch by me annotates a fallthrough in the mscan driver.
The ti_hecc driver is converted to use devm_platform_ioremap_resource_byname()
in a patch by Dejin Zheng.
Liu Shixin's patch converts the pcan_usb_pro driver to make use of
le32_add_cpu() instead of open coding it.
Wang Hai's patch for the peak_pciefd_main driver removes an unused makro.
Vaibhav Gupta's patch converts the pch_can driver to generic power management.
Stephane Grosjean improves the pcan_usb usb driver by first documenting the
commands sent to the device and by adding support of rxerr/txerr counters.
The next patch is by me and cleans up the Kconfig of the CAN SPI drivers.
The next 6 patches all target the mcp251x driver, they are by Timo Schlüßler,
Andy Shevchenko, Tim Harvey and me. They update the DT bindings documentation,
sort the include files alphabetically, add GPIO support, make use of the
readx_poll_timeout() helper, and add support for half duplex SPI-controllers.
Wolfram Sang contributes a patch to update the contact email address in the
mscan driver, while Zhang Changzhong updates the clock handling.
The next patch is by and updates the rx-offload infrastructure to support
callback less usage.
The last 6 patches add support for the mcp25xxfd CAN SPI driver. First the
dt-bindings are added by Oleksij Rempel, the regmap infrastructure and the main
driver is contributed by me. Kurt Van Dijck adds listen-only support,
Manivannan Sadhasivam adds himself as maintainer, and Thomas Kopp himself as a
reviewer.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
* some AP-side infrastructure for FILS discovery and
unsolicited probe resonses
* a major rework of the encapsulation/header conversion
offload from Felix, to fit better with e.g. AP_VLAN
interfaces
* performance fix for VHT A-MPDU size, don't limit to HT
* some initial patches for S1G (sub 1 GHz) support, more
will come in this area
* minor cleanups
-----BEGIN PGP SIGNATURE-----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=Bnsm
-----END PGP SIGNATURE-----
Merge tag 'mac80211-next-for-net-next-2020-09-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
This time we have:
* some AP-side infrastructure for FILS discovery and
unsolicited probe resonses
* a major rework of the encapsulation/header conversion
offload from Felix, to fit better with e.g. AP_VLAN
interfaces
* performance fix for VHT A-MPDU size, don't limit to HT
* some initial patches for S1G (sub 1 GHz) support, more
will come in this area
* minor cleanups
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
* fix using HE on 2.4 GHz
* AQL (airtime queue limit) estimation & VHT160 fix
* do not oversize A-MPDUs if local capability is smaller than peer's
* fix radiotap on 6 GHz to not put 2.4 GHz flag
* fix Kconfig for lib80211
* little fixlet for 6 GHz channel number / frequency conversion
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEH1e1rEeCd0AIMq6MB8qZga/fl8QFAl9oqO8ACgkQB8qZga/f
l8TKTRAAg3M+tx6FSz5zaxb5JuILSkxLvMkFeYgWpVjVaDRKN4/l3XSI68dswZtU
NjNiA8RQ0+lOLOyvmUD38pvEPUQuD+3EYl7f7vsRgNV2ylHqdII6xCaqWYXWdu5h
EVtA58SSbqw/RHyCGA1IQ5lO57fCSp1d4+0tYF0FzyfV2Qg8iBaYiGgeSc9xz28Q
Cw0l5jqEyk0h73ptm/zznESJKFokrs0cQZ0R2+IbrtJmTXTMwSlKWJt00toT42ZL
TXFfMQvtnZyL0HuWxilYBOFzp9Np4i7CGIyDechMlPej5+euzUrg6yGS42uMaR4c
qtgynL5KP6dbS/tOnCH4FmFgA25mIWzOOkGCuOxJjVzxE/7bqqfi6hGFxdhtmnoW
6889XSX3ueQMiOPV+8fATMz5oi5N6OHrnkyHirq7RiwVv7DodRLcNP4rcbnaFcIa
j2OQ+uAmmOb0x3n/t1L2aozqPssS/xKGPHcAP1su5lkeYzz6leiTlqNxGxIA16C0
QmByD8qf19R3OxPAlnTRRMQlMiCs4yGqjsBRH4u053FsNnSmPMw+si++zDKu7pP4
q9zv4a+FY/MZyUNx4k+XFynk18nF8Xx1aNLADCe+AtN+smhUeITapkvcHN4iae+1
89XnqVJaEGvnFc2F16K1cfVEmERQR9zY/ufmtFthu7S+xgxosr8=
=ZjBk
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-net-2020-09-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Just a few fixes:
* fix using HE on 2.4 GHz
* AQL (airtime queue limit) estimation & VHT160 fix
* do not oversize A-MPDUs if local capability is smaller than peer's
* fix radiotap on 6 GHz to not put 2.4 GHz flag
* fix Kconfig for lib80211
* little fixlet for 6 GHz channel number / frequency conversion
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace a comma between expression statements by a semicolon.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit 37ab4fa784 ("net: unix: allow bind to fail on mutex lock"),
the assignment to err is redundant. So remove it.
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the backlog status in not exposed to user-space.
Since long backlogs (or simply not empty ones) can be a
source of noticeable latency, -RT deployments need some way
to inspect it.
Additionally, there isn't a direct match between 'softnet_stat'
lines and the related CPU - sd for offline CPUs are not dumped -
so this patch also includes the CPU id into such entry.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sg_init_table zeroes its first argument, so the allocation of that argument
doesn't have to.
the semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression x,n,flags;
@@
x =
- kcalloc
+ kmalloc_array
(n,sizeof(*x),flags)
...
sg_init_table(x,n)
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Remove redundant call sites or call sites that are already covered
by tracepoints.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Remove several redundant dprintk call sites, and replace a couple of
potentially useful ones with tracepoints.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
In many cases, tracepoints already report these errors. In others,
the dprintks were mainly useful when this code was less mature.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: These are superfluous now that rpc_create() and friends
have tracepoints to report errors.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Other XDR functions no longer have dprintk call sites.
These were added during development and can be removed now that
the code is mature.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
In many cases, tracepoints already report these errors. In others,
the dprintks were mainly useful when this code was less mature.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Time to remove dprintk call sites in here.
Regarding the rpc_bind_status tracepoint: It's friendlier to
administrators if they don't have to look up the error code to
figure out what went wrong. Replace trace_rpc_bind_status with a
set of tracepoints that report more specifically what the problem
was, and what RPC program/version was being queried.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up.
When enabled, this dprintk adds a line in /var/log/messages after
every RPC that reports the task ID (no connection to on the wire
XID values) and the RPC's result (no connection to the program,
operation, or the arguments and results).
Thus it's value is pretty low. Let's remove it.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Replace dprintk call sites.
Note that rpc_call_rpcerror() already has a trace point, so perhaps
adding trace_rpc_refresh_status() isn't necessary. However, it does
report a particular category of error.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
For a long while we've wanted a tracepoint that fires when a major
timeout is reported in the system log. Such a tracepoint can be
attached to other actions that can take place when a timeout is
detected (eg, server or connection health assessment).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The original purpose of this expensive call is to prevent a long
queue of requests from blocking other work.
The cond_resched() call is unnecessary after just a single send
operation.
For longer queues, instead of invoking the kernel scheduler, simply
release the transport send lock and return to the RPC scheduler.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This trace event can be used to audit transport connections from the
client.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: The rpc_rpc_request tracepoint serves the same purpose.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: The rpc_task_run_action tracepoint serves the same
purpose.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
"no socket space" is an exceptional and infrequent condition
that troubleshooters want to know about.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Generate a trace event when an RPC request is queued without being
sent immediately.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Replace a dprintk() with a tracepoint. The tracepoint marks the
point where an RPC request is assigned an XID.
Additional clean up: Remove trace_xprt_enq_xmit, which reports much
the same thing. That tracepoint was added for debugging commit
918f3c1fe8 ("SUNRPC: Improve latency for interactive tasks").
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
These instruments don't appear to add any substantial value.
We already have this at the termination of each RPC:
iozone-2617 [002] 975.713126: rpc_stats_latency: task:418@5 xid=0x260eab5d nfsv3 LOOKUP backlog=15 rtt=32 execute=58
iozone-2617 [002] 975.713127: xprt_release_cong: task:418@5 snd_task:4294967295 cong=256 cwnd=16384
iozone-2617 [002] 975.713127: xprt_put_cong: task:418@5 snd_task:4294967295 cong=0 cwnd=16384
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Introduce a tracepoint in call_allocate that reports the exact
sizes in the RPC buffer allocation request and the status of the
result. This helps catch problems with XDR buffer provisioning,
and replaces transport-specific debugging instrumentation.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Request completion is already recorded by an "rpc_task_wakeup
queue=xprt_pending" trace record. A subsequent rpc_xdr_recvfrom
trace record shows the number of bytes received.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Current behaviour: every time a v3 operation is re-sent to the server
we update (double) the timeout. There is no distinction between whether
or not the previous timer had expired before the re-sent happened.
Here's the scenario:
1. Client sends a v3 operation
2. Server RST-s the connection (prior to the timeout) (eg., connection
is immediately reset)
3. Client re-sends a v3 operation but the timeout is now 120sec.
As a result, an application sees 2mins pause before a retry in case
server again does not reply. Where as if a connection reset didn't
change the timeout value, the client would have re-tried (the 3rd
time) after 60secs.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The "WITH Linux-syscall-note" exception is intended for UAPI headers.
See LICENSES/exceptions/Linux-syscall-note
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20200403073741.18352-1-masahiroy@kernel.org
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
sg_init_table zeroes its first argument, so the allocation of that argument
doesn't have to.
the semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression x,n,flags;
@@
x =
- kcalloc
+ kmalloc_array
(n,sizeof(*x),flags)
...
sg_init_table(x,n)
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check whether there is any hwaccel VLAN tag on RX, and if there is,
treat it as the tag_8021q header.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The whole purpose of tag_8021q is to send VLAN-tagged traffic to the
CPU, from which the driver can decode the source port and switch id.
Currently this only works if the VLAN filtering on the master is
disabled. Change that by explicitly adding code to tag_8021q.c to add
the VLANs corresponding to the tags to the filter of the master
interface.
Because we now need to call vlan_vid_add, then we also need to hold the
RTNL mutex. Propagate that requirement to the callers of dsa_8021q_setup
and modify the existing call sites as appropriate. Note that one call
path, sja1105_best_effort_vlan_filtering_set -> sja1105_vlan_filtering
-> sja1105_setup_8021q_tagging, was already holding this lock.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Most DSA switch tags shift the EtherType to the right, causing the
master to not parse the VLAN as VLAN.
However, not all switches do that (example: tail tags, tag_8021q etc),
and if the DSA master has "rx-vlan-filter: on" in ethtool -k, then we
have a problem.
Therefore, we could populate the VLAN table of the master, just in case
(for some switches it will not make a difference), so that network I/O
can work even with a VLAN filtering master.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the bridge has VLAN awareness disabled there isn't any duplication
of functionality, since the bridge does not process VLAN. Don't deny
adding 8021q uppers to DSA switch ports in that case. The switch is
supposed to simply pass traffic leaving the VLAN tag as-is, and the
stack will happily strip the VLAN tag for all 8021q uppers that exist.
We need to ensure that there are no 8021q uppers when the user attempts
to enable bridge vlan_filtering.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current logic beats me a little bit. The comment that "bridge skips
-EOPNOTSUPP, so skip the prepare phase" was introduced in commit
fb2dabad69 ("net: dsa: support VLAN filtering switchdev attr").
I'm not sure:
(a) ok, the bridge skips -EOPNOTSUPP, but, so what, where are we
returning -EOPNOTSUPP?
(b) even if we are, and I'm just not seeing it, what is the causality
relationship between the bridge skipping -EOPNOTSUPP and DSA
skipping the prepare phase, and just returning zero?
One thing is certain beyond doubt though, and that is that DSA currently
refuses VLAN filtering from the "commit" phase instead of "prepare", and
that this is not a good thing:
ip link add br0 type bridge
ip link add br1 type bridge vlan_filtering 1
ip link set swp2 master br0
ip link set swp3 master br1
[ 3790.379389] 001: sja1105 spi0.1: VLAN filtering is a global setting
[ 3790.379399] 001: ------------[ cut here ]------------
[ 3790.379403] 001: WARNING: CPU: 1 PID: 515 at net/switchdev/switchdev.c:157 switchdev_port_attr_set_now+0x9c/0xa4
[ 3790.379420] 001: swp3: Commit of attribute (id=6) failed.
[ 3790.379533] 001: [<c11ff588>] (switchdev_port_attr_set_now) from [<c11b62e4>] (nbp_vlan_init+0x84/0x148)
[ 3790.379544] 001: [<c11b62e4>] (nbp_vlan_init) from [<c11a2ff0>] (br_add_if+0x514/0x670)
[ 3790.379554] 001: [<c11a2ff0>] (br_add_if) from [<c1031b5c>] (do_setlink+0x38c/0xab0)
[ 3790.379565] 001: [<c1031b5c>] (do_setlink) from [<c1036fe8>] (__rtnl_newlink+0x44c/0x748)
[ 3790.379573] 001: [<c1036fe8>] (__rtnl_newlink) from [<c1037328>] (rtnl_newlink+0x44/0x60)
[ 3790.379580] 001: [<c1037328>] (rtnl_newlink) from [<c10315fc>] (rtnetlink_rcv_msg+0x124/0x2f8)
[ 3790.379590] 001: [<c10315fc>] (rtnetlink_rcv_msg) from [<c10926b8>] (netlink_rcv_skb+0xb8/0x110)
[ 3790.379806] 001: ---[ end trace 0000000000000002 ]---
[ 3790.379819] 001: sja1105 spi0.1 swp3: failed to initialize vlan filtering on this port
So move the current logic that may fail (except ds->ops->port_vlan_filtering,
that is way harder) into the prepare stage of the switchdev transaction.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is checking for the following order of operations, and makes sure
to deny that configuration:
ip link add link swp2 name swp2.100 type vlan id 100
ip link add br0 type bridge vlan_filtering 1
ip link set swp2 master br0
bridge vlan add dev swp2 vid 100
Instead of using vlan_for_each(), which looks at the VLAN filters
installed with vlan_vid_add(), just track the 8021q uppers. This has the
advantage of freeing up the vlan_vid_add() call for actual VLAN
filtering.
There is another change in this patch. The check is moved in slave.c,
from switch.c. I don't think it makes sense to have this 8021q upper
check for each switch port that gets notified of that VLAN addition
(these include DSA links and CPU ports, we know those can't have 8021q
uppers because they don't have a net_device registered for them), so
just do it in slave.c, for that one slave interface.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
DSA tries to prevent having a VLAN added by a bridge and by an 802.1Q
upper at the same time. It does that by checking the VID in
.ndo_vlan_rx_add_vid(), since that's something that the 8021q module
calls, via vlan_vid_add(). When a VLAN matches in both subsystems, this
check returns -EBUSY.
However the vlan_vid_add() function isn't specific to the 8021q module
in any way at all. It is simply the kernel's way to tell an interface to
add a VLAN to its RX filter and not drop that VLAN. So there's no reason
to return -EBUSY when somebody tries to call vlan_vid_add() for a VLAN
that was installed by the bridge. The proper behavior is to accept that
configuration.
So what's wrong is how DSA checks that it has an 8021q upper. It should
look at the actual uppers for that, not just assume that the 8021q
module was somewhere in the call stack of .ndo_vlan_rx_add_vid().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We'll be adding a new check in the PRECHANGEUPPER notifier, where we'll
need to check some VLAN uppers. It is hard to do that when there is
already a function named dsa_slave_upper_vlan_check. So rename this one.
Not to mention that this function probably shouldn't have started with
"dsa_slave_" in the first place, since the struct net_device argument
isn't a DSA slave, but an 8021q upper of one.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There doesn't seem to be any strong technical reason for doing it this
way, but we'll be adding more checks for invalid upper device
configurations, and it will be easier to have them all grouped under
PRECHANGEUPPER.
Tested that it still works:
ip link set br0 type bridge vlan_filtering 1
ip link add link swp2 name swp2.100 type vlan id 100
ip link set swp2.100 master br0
[ 20.321312] br0: port 5(swp2.100) entered blocking state
[ 20.326711] br0: port 5(swp2.100) entered disabled state
Error: dsa_core: Cannot enslave VLAN device into VLAN aware bridge.
[ 20.346549] br0: port 5(swp2.100) entered blocking state
[ 20.351957] br0: port 5(swp2.100) entered disabled state
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When budget is non-zero, skb_unref() has already handled the
NULL checking.
When budget is zero, the dev_consume_skb_any() has handled NULL
checking in __dev_kfree_skb_irq(), or dev_kfree_skb() which also
ultimately call skb_unref().
So remove the unnecessary checking in napi_consume_skb().
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When calculating ancestor_size with IPv6 enabled, simply using
sizeof(struct ipv6_pinfo) doesn't account for extra bytes needed for
alignment in the struct sctp6_sock. On x86, there aren't any extra
bytes, but on ARM the ipv6_pinfo structure is aligned on an 8-byte
boundary so there were 4 pad bytes that were omitted from the
ancestor_size calculation. This would lead to corruption of the
pd_lobby pointers, causing an oops when trying to free the sctp
structure on socket close.
Fixes: 636d25d557 ("sctp: not copy sctp_sock pd_lobby in sctp_copy_descendant")
Signed-off-by: Henry Ptasinski <hptasinski@google.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the code auto-creates hci_conn only if the remote address has
been discovered before. This may not be the case. For example, the
remote device may trigger connection after reboot at already-paired
state so there is no inquiry result found, but it is still correct to
create the hci_conn when Connection Complete event is received.
A better guard is to check against bredr allowlist. Devices in the
allowlist have been given permission to auto-connect.
Fixes: 4f40afc6c7 ("Bluetooth: Handle BR/EDR devices during suspend")
Signed-off-by: Sonny Sasaka <sonnysasaka@chromium.org>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Set scan parameters when there is at least one Advertisement monitor.
Signed-off-by: Howard Chung <howardchung@google.com>
Reviewed-by: Alain Michaud <alainm@chromium.org>
Reviewed-by: Manish Mandlik <mmandlik@chromium.org>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This fixes the count of Adv monitor upon monitor removal.
The following test was performed.
- Start two btmgmt consoles, issue a btmgmt advmon-remove command on one
console and observe a MGMT_EV_ADV_MONITOR_REMOVED event on the other.
Signed-off-by: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Howard Chung <howardchung@google.com>
Reviewed-by: Alain Michaud <alainm@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Add entries for the 100base-FX full and half duplex supported modes.
$ ethtool eth0
Supported ports: [ FIBRE ]
Supported link modes: 100baseFX/Half 100baseFX/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: 100baseFX/Half 100baseFX/Full
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: 100Mb/s
Duplex: Full
Auto-negotiation: off
Port: MII
PHYAD: 1
Transceiver: external
Supports Wake-on: gs
Wake-on: d
SecureOn password: 00:00:00:00:00:00
Current message level: 0x00000000 (0)
Link detected: yes
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
skb->nh.raw has been renamed as skb->network_header in 2007, in
commit b0e380b1d8 ("[SK_BUFF]: unions of just one member don't get
anything done, kill them")
So here we change it to the new name.
Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow the DSA drivers to implement the devlink call to get info info,
e.g. driver name, firmware version, ASIC ID, etc.
v2:
Combine declaration and the assignment on a single line.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow DSA drivers to make use of devlink regions, via simple wrappers.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Given a devlink instance, return the dsa switch it is associated to.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass the region to be snapshotted to the function performing the
snapshot. This allows one function to operate on numerous regions.
v4:
Add missing kerneldoc for ICE
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When IPV6_SEG6_HMAC is enabled and CRYPTO is disabled, it results in the
following Kbuild warning:
WARNING: unmet direct dependencies detected for CRYPTO_HMAC
Depends on [n]: CRYPTO [=n]
Selected by [y]:
- IPV6_SEG6_HMAC [=y] && NET [=y] && INET [=y] && IPV6 [=y]
WARNING: unmet direct dependencies detected for CRYPTO_SHA1
Depends on [n]: CRYPTO [=n]
Selected by [y]:
- IPV6_SEG6_HMAC [=y] && NET [=y] && INET [=y] && IPV6 [=y]
WARNING: unmet direct dependencies detected for CRYPTO_SHA256
Depends on [n]: CRYPTO [=n]
Selected by [y]:
- IPV6_SEG6_HMAC [=y] && NET [=y] && INET [=y] && IPV6 [=y]
The reason is that IPV6_SEG6_HMAC selects CRYPTO_HMAC, CRYPTO_SHA1, and
CRYPTO_SHA256 without depending on or selecting CRYPTO while those configs
are subordinate to CRYPTO.
Honor the kconfig menu hierarchy to remove kconfig dependency warnings.
Fixes: bf355b8d2c ("ipv6: sr: add core files for SR HMAC support")
Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- fix wrong type use in backbone_gw hash, by Linus Luessing
- disable TT re-routing for multicast packets, by Linus Luessing
- Add missing include for in_interrupt(), by Sven Eckelmann
- fix BLA/multicast issues for packets sent via unicast,
by Linus Luessing (3 patches)
-----BEGIN PGP SIGNATURE-----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=JjK9
-----END PGP SIGNATURE-----
Merge tag 'batadv-net-for-davem-20200918' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here are some batman-adv bugfixes:
- fix wrong type use in backbone_gw hash, by Linus Luessing
- disable TT re-routing for multicast packets, by Linus Luessing
- Add missing include for in_interrupt(), by Sven Eckelmann
- fix BLA/multicast issues for packets sent via unicast,
by Linus Luessing (3 patches)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
If the header file containing a function's prototype isn't included by
the sourcefile containing the associated function, the build system
complains of missing prototypes.
Fixes the following W=1 kernel build warning(s):
net/tipc/udp_media.c:446:5: warning: no previous prototype for ‘tipc_udp_nl_dump_remoteip’ [-Wmissing-prototypes]
net/tipc/udp_media.c:532:5: warning: no previous prototype for ‘tipc_udp_nl_add_bearer_data’ [-Wmissing-prototypes]
net/tipc/udp_media.c:614:5: warning: no previous prototype for ‘tipc_udp_nl_bearer_add’ [-Wmissing-prototypes]
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Historically L2TP core statistics count the L2TP header in the
per-session and per-tunnel byte counts tracked for transmission and
receipt.
Now that l2tp_xmit_skb updates tx stats, it is necessary for
l2tp_xmit_core to pass out the length of the transmitted packet so that
the statistics can be updated correctly.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the function ovs_ct_limit_exit, there is already a helper vaibale
which could be reused to improve the readability, so i fix it in this
patch.
Signed-off-by: Zeng Tao <prime.zeng@hisilicon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Drop repeated words in net/bridge/.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Roopa Prabhu <roopa@nvidia.com>
Cc: Nikolay Aleksandrov <nikolay@nvidia.com>
Cc: bridge@lists.linux-foundation.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Drop repeated words in net/atm/.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Chas Williams <3chas3@gmail.com>
Cc: linux-atm-general@lists.sourceforge.net
Signed-off-by: David S. Miller <davem@davemloft.net>
Drop repeated words in net/tipc/.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jon Maloy <jmaloy@redhat.com>
Cc: Ying Xue <ying.xue@windriver.com>
Cc: tipc-discussion@lists.sourceforge.net
Signed-off-by: David S. Miller <davem@davemloft.net>
Drop repeated words in net/bluetooth/.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Drop repeated words in net/ipv6/.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Drop repeated words in net/rds/.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Cc: linux-rdma@vger.kernel.org
Cc: rds-devel@oss.oracle.com
Signed-off-by: David S. Miller <davem@davemloft.net>
Drop repeated words in net/core/.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rekeying is required for security since a key is less secure when using
for a long time. Also, key will be detached when its nonce value (or
seqno ...) is exhausted. We now make the rekeying process automatic and
configurable by user.
Basically, TIPC will at a specific interval generate a new key by using
the kernel 'Random Number Generator' cipher, then attach it as the node
TX key and securely distribute to others in the cluster as RX keys (-
the key exchange). The automatic key switching will then take over, and
make the new key active shortly. Afterwards, the traffic from this node
will be encrypted with the new session key. The same can happen in peer
nodes but not necessarily at the same time.
For simplicity, the automatically generated key will be initiated as a
per node key. It is not too hard to also support a cluster key rekeying
(e.g. a given node will generate a unique cluster key and update to the
others in the cluster...), but that doesn't bring much benefit, while a
per-node key is even more secure.
We also enable user to force a rekeying or change the rekeying interval
via netlink, the new 'set key' command option: 'TIPC_NLA_NODE_REKEYING'
is added for these purposes as follows:
- A value >= 1 will be set as the rekeying interval (in minutes);
- A value of 0 will disable the rekeying;
- A value of 'TIPC_REKEYING_NOW' (~0) will force an immediate rekeying;
The default rekeying interval is (60 * 24) minutes i.e. done every day.
There isn't any restriction for the value but user shouldn't set it too
small or too large which results in an "ineffective" rekeying (thats ok
for testing though).
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
With support from the master key option in the previous commit, it
becomes easy to make frequent updates/exchanges of session keys between
authenticated cluster nodes.
Basically, there are two situations where the key exchange will take in
place:
- When a new node joins the cluster (with the master key), it will need
to get its peer's TX key, so that be able to decrypt further messages
from that peer.
- When a new session key is generated (by either user manual setting or
later automatic rekeying feature), the key will be distributed to all
peer nodes in the cluster.
A key to be exchanged is encapsulated in the data part of a 'MSG_CRYPTO
/KEY_DISTR_MSG' TIPC v2 message, then xmit-ed as usual and encrypted by
using the master key before sending out. Upon receipt of the message it
will be decrypted in the same way as regular messages, then attached as
the sender's RX key in the receiver node.
In this way, the key exchange is reliable by the link layer, as well as
security, integrity and authenticity by the crypto layer.
Also, the forward security will be easily achieved by user changing the
master key actively but this should not be required very frequently.
The key exchange feature is independent on the presence of a master key
Note however that the master key still is needed for new nodes to be
able to join the cluster. It is also optional, and can be turned off/on
via the sysfs: 'net/tipc/key_exchange_enabled' [default 1: enabled].
Backward compatibility is guaranteed because for nodes that do not have
master key support, key exchange using master key ie. tx_key = 0 if any
will be shortly discarded at the message validation step. In other
words, the key exchange feature will be automatically disabled to those
nodes.
v2: fix the "implicit declaration of function 'tipc_crypto_key_flush'"
error in node.c. The function only exists when built with the TIPC
"CONFIG_TIPC_CRYPTO" option.
v3: use 'info->extack' for a message emitted due to netlink operations
instead (- David's comment).
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
In addition to the supported cluster & per-node encryption keys for the
en/decryption of TIPC messages, we now introduce one option for user to
set a cluster key as 'master key', which is simply a symmetric key like
the former but has a longer life cycle. It has two purposes:
- Authentication of new member nodes in the cluster. New nodes, having
no knowledge of current session keys in the cluster will still be
able to join the cluster as long as they know the master key. This is
because all neighbor discovery (LINK_CONFIG) messages must be
encrypted with this key.
- Encryption of session encryption keys during automatic exchange and
update of those.This is a feature we will introduce in a later commit
in this series.
We insert the new key into the currently unused slot 0 in the key array
and start using it immediately once the user has set it.
After joining, a node only knowing the master key should be fully
communicable to existing nodes in the cluster, although those nodes may
have their own session keys activated (i.e. not the master one). To
support this, we define a 'grace period', starting from the time a node
itself reports having no RX keys, so the existing nodes will use the
master key for encryption instead. The grace period can be extended but
will automatically stop after e.g. 5 seconds without a new report. This
is also the basis for later key exchanging feature as the new node will
be impossible to decrypt anything without the support from master key.
For user to set a master key, we define a new netlink flag -
'TIPC_NLA_NODE_KEY_MASTER', so it can be added to the current 'set key'
netlink command to specify the setting key to be a master key.
Above all, the traditional cluster/per-node key mechanism is guaranteed
to work when user comes not to use this master key option. This is also
compatible to legacy nodes without the feature supported.
Even this master key can be updated without any interruption of cluster
connectivity but is so is needed, this has to be coordinated and set by
the user.
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
We reduce the lasting time for a pending TX key to be active as well as
for a passive RX key to be freed which generally helps speed up the key
switching. It is not expected to be too fast but should not be too slow
either. Also the key handling logic is simplified that a pending RX key
will be removed automatically if it is found not working after a number
of times; the probing for a pending TX key is now carried on a specific
message user ('LINK_PROTOCOL' or 'LINK_CONFIG') which is more efficient
than using a timer on broadcast messages, the timer is reserved for use
later as needed.
The kernel logs or 'pr***()' are now made as clear as possible to user.
Some prints are added, removed or changed to the debug-level. The
'TIPC_CRYPTO_DEBUG' definition is removed, and the 'pr_debug()' is used
instead which will be much helpful in runtime.
Besides we also optimize the code in some other places as a preparation
for later commits.
v2: silent more kernel logs, also use 'info->extack' for a message
emitted due to netlink operations instead (- David's comments).
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
The dev flash status notify function parameter lists are getting
rather long, so add a struct to be filled and passed rather than
continuously changing the function signatures.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a timeout element to the DEVLINK_CMD_FLASH_UPDATE_STATUS
netlink message for use by a userland utility to show that
a particular firmware flash activity may take a long but
bounded time to finish. Also add a handy helper for drivers
to make use of the new timeout value.
UI usage hints:
- if non-zero, add timeout display to the end of the status line
[component] status_msg ( Xm Ys : Am Bs )
using the timeout value for Am Bs and updating the Xm Ys
every second
- if the timeout expires while awaiting the next update,
display something like
[component] status_msg ( timeout reached : Am Bs )
- if new status notify messages are received, remove
the timeout and start over
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ocelot_port->ts_id is used to:
(a) populate skb->cb[0] for matching the TX timestamp in the PTP IRQ
with an skb.
(b) populate the REW_OP from the injection header of the ongoing skb.
Only then is ocelot_port->ts_id incremented.
This is a problem because, at least theoretically, another timestampable
skb might use the same ocelot_port->ts_id before that is incremented.
Normally all transmit calls are serialized by the netdev transmit
spinlock, but in this case, ocelot_port_add_txtstamp_skb() is also
called by DSA, which has started declaring the NETIF_F_LLTX feature
since commit 2b86cb8299 ("net: dsa: declare lockless TX feature for
slave ports"). So the logic of using and incrementing the timestamp id
should be atomic per port.
The solution is to use the global ocelot_port->ts_id only while
protected by the associated ocelot_port->ts_id_lock. That's where we
populate skb->cb[0]. Note that for ocelot, ocelot_port_add_txtstamp_skb
is called for the actual skb, but for felix, it is called for the skb's
clone. That is something which will also be changed in the future.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The combination of aca_free_rcu, introduced in commit 2384d02520
("net/ipv6: Add anycast addresses to a global hashtable"), and
fib6_info_destroy_rcu, introduced in commit 9b0a8da8c4 ("net/ipv6:
respect rcu grace period before freeing fib6_info"), can result in
an extra rcu grace period being needed when deleting an interface,
with the result that netdev_wait_allrefs ends up hitting the msleep(250),
which is considerably longer than the required grace period.
This can result in long delays when deleting a large number of interfaces,
and it can be observed with this script:
ns=dummy-ns
NIFS=100
ip netns add $ns
ip netns exec $ns ip link set lo up
ip netns exec $ns sysctl net.ipv6.conf.default.disable_ipv6=0
ip netns exec $ns sysctl net.ipv6.conf.default.forwarding=1
for ((i=0; i<$NIFS; i++))
do
if=eth$i
ip netns exec $ns ip link add $if type dummy
ip netns exec $ns ip link set $if up
ip netns exec $ns ip -6 addr add 2021:$i::1/120 dev $if
done
for ((i=0; i<$NIFS; i++))
do
if=eth$i
ip netns exec $ns ip link del $if
done
ip netns del $ns
Instead of using a fixed msleep(250), this patch tries an extra
rcu_barrier() followed by an exponential backoff.
Time with this patch on a 5.4 kernel:
real 0m7.704s
user 0m0.385s
sys 0m1.230s
Time without this patch:
real 0m31.522s
user 0m0.438s
sys 0m1.156s
v2: use exponential backoff instead of trying to wake up
netdev_wait_allrefs.
v3: preserve reverse christmas tree ordering of local variables
v4: try an extra rcu_barrier before the backoff, plus some
cosmetic changes.
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds mac80211 support to configure unsolicited
broadcast probe response transmission for in-band discovery in 6GHz.
Changes include functions to store and retrieve probe response template,
and packet interval (0 - 20 TUs).
Setting interval to 0 disables the unsolicited broadcast probe response
transmission.
Signed-off-by: Aloka Dixit <alokad@codeaurora.org>
Link: https://lore.kernel.org/r/010101747a946b35-ad25858a-1f1f-48df-909e-dc7bf26d9169-000000@us-west-2.amazonses.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This patch adds new attributes to support unsolicited broadcast
probe response transmission used for in-band
discovery in 6GHz band (IEEE P802.11ax/D6.0 26.17.2.3.2, AP behavior for
fast passive scanning).
The new attribute, NL80211_ATTR_UNSOL_BCAST_PROBE_RESP, is nested which
supports following parameters:
(1) NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INT - Packet interval
(2) NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_TMPL - Template data
Signed-off-by: Aloka Dixit <alokad@codeaurora.org>
Link: https://lore.kernel.org/r/010101747a946698-aac263ae-2ed3-4dab-9590-0bc7131214e1-000000@us-west-2.amazonses.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When trying to associate to an AP support 180 or 80+80 MHz on 6 GHz with a
STA that only has 80 Mhz support the cf2 field inside the chandef will get
set causing the association to fail when trying to validate the chandef.
Fix this by checking the support flags prior to setting cf2.
Fixes: 57fa5e85d5 ("mac80211: determine chandef from HE 6 GHz operation")
Signed-off-by: John Crispin <john@phrozen.org>
Link: https://lore.kernel.org/r/20200918115304.1135693-1-john@phrozen.org
[reword commit message a bit]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Some APs (e.g. Asus RT-AC88U) have been observed to report an HT MSDU size
limit of 3839 and a VHT limit of 7991. These APs can handle bigger frames
than 3839 bytes just fine, so we should remove the VHT limit based on the
HT capabilities. This improves tx throughput.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20200916164611.8022-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
S1G channels have a single width defined per frequency, so
derive it from the channel flags with
ieee80211_s1g_channel_width().
Also support setting an S1G channel where control frequency may
differ from operating, and add some basic validation to
ensure the control channel is with the operating.
Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200908190323.15814-6-thomas@adapt-ip.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The S1G beacon has a different header size than regular
beacons, so adjust the beacon head validator.
Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200908190323.15814-5-thomas@adapt-ip.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
S1G channels have a minimum bandwidth of 1Mhz, and there
is a 1:1 mapping of allowed bandwidth to channel number.
Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200908190323.15814-4-thomas@adapt-ip.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
S1G supports 5 channel widths: 1, 2, 4, 8, and 16. One
channel width is allowed per frequency in each operating
class, so it makes more sense to advertise the specific
channel width allowed.
Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200908190323.15814-3-thomas@adapt-ip.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Remove the newly added ieee80211_set_vif_encap_ops declaration.
No further code changes.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20200908123702.88454-15-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For encap-offloaded packets, ieee80211_free_txskb cannot be used, since it
does not have the vif pointer.
Using ieee80211_tx_status_ext for this purpose has the advantage of being able
avoid an extra station lookup for AQL
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20200908123702.88454-12-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Make ieee80211_tx_status_8023 call ieee80211_tx_status_ext, similar to
ieee80211_tx_status.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20200908123702.88454-11-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Calling mod_timer for every rx/tx packet can be quite expensive.
Instead of constantly updating the timer, we can simply let it run out
and check the timestamp of the last ACK or rx packet to re-arm it.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20200908123702.88454-9-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In order to unify the tx status path, the hw 802.11 encapsulation flag
needs to survive the trip to the tx status call.
Since we don't have any free bits in info->flags, we need to move one.
IEEE80211_TX_INTFL_NEED_TXPROCESSING is only used internally in mac80211,
and only before the call into the driver.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20200908123702.88454-10-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
All drivers using airtime fairness are calling ieee80211_sta_register_airtime
directly, now they must. Document this as well.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20200908123702.88454-8-nbd@nbd.name
[johannes: update the documentation to suit]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Move redundant functionality from __ieee80211_tx_status into
ieee80211_tx_status_ext. Preparation for unifying with the 802.3 tx status
codepath.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20200908123702.88454-7-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The current API (which lets the driver turn on/off per vif directly) has a
number of limitations:
- it does not deal with AP_VLAN
- conditions for enabling (no tkip, no monitor) are only checked at
add_interface time
- no way to indicate 4-addr support
In order to address this, store offload flags in struct ieee80211_vif
(easy to extend for decap offload later). mac80211 initially sets the enable
flag, but gives the driver a chance to modify it before its settings are
applied. In addition to the .add_interface op, a .update_vif_offload op is
introduced, which can be used for runtime changes.
If a driver can't disable encap offload at runtime, or if it has some extra
limitations, it can simply override the flags within those ops.
Support for encap offload with 4-address mode interfaces can be enabled
by setting a flag from .add_interface or .update_vif_offload.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20200908123702.88454-6-nbd@nbd.name
[resolved conflict with commit aa2092a9ba ("ath11k: add raw mode and
software crypto support")]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This simplifies the checks in the encap offload tx handler and allows using
it in cases where software crypto is used for multicast packets, e.g. when
using an AP_VLAN.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20200908123702.88454-4-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Update the last_tx timestamp to avoid tearing down the aggregation session
early. Fall back to the slow path if the session setup is still running
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20200908123702.88454-3-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When LIB80211_CRYPT_CCMP is enabled and CRYPTO is disabled, it results in unmet
direct dependencies config warning. The reason is that LIB80211_CRYPT_CCMP
selects CRYPTO_AES and CRYPTO_CCM, which are subordinate to CRYPTO. This is
reproducible with CRYPTO disabled and R8188EU enabled, where R8188EU selects
LIB80211_CRYPT_CCMP but does not select or depend on CRYPTO.
Honor the kconfig menu hierarchy to remove kconfig dependency warnings.
Fixes: a11e2f8548 ("lib80211: use crypto API ccm(aes) transform for CCMP processing")
Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Link: https://lore.kernel.org/r/20200909095452.3080-1-fazilyildiran@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When converting from struct ieee80211_tx_rate to ieee80211_rx_status,
there was one check missing to fill in the bandwidth for 160 MHz
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20200915085945.3782-2-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The unit of the return value of ieee80211_get_rate_duration is nanoseconds, not
microseconds. Adjust the duration checks to account for that.
For higher data rates, allow larger estimated aggregation sizes, and add some
values for HE as well, which can use much larger aggregates.
Since small packets with high data rates can now lead to duration values too
small for info->tx_time_est, return a minimum of 4us.
Fixes: f01cfbaf9b ("mac80211: improve AQL aggregation estimation for low data rates")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20200915085945.3782-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Christoph reported an infinite loop in the subflow receive path
under stress condition.
If there are multiple subflows, each of them using a large send
buffer, the delta between the sequence number used by
MPTCP-level retransmission can and the current msk->ack_seq
can be greater than MAX_INT.
In the above scenario, when calling mptcp_subflow_discard_data(),
such delta will be truncated to int, and could result in a negative
number: no bytes will be dropped, and subflow_check_data_avail()
will try again to process the same packet, looping forever.
This change addresses the issue by expanding the 'limit' size to 64
bits, so that overflows are not possible anymore.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/87
Fixes: 6719331c2f ("mptcp: trigger msk processing even for OoO data")
Reported-and-tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If smc_listen_rmda_finish() returns with an error, the storage
addressed by 'buf' is freed a second time.
Consolidate freeing under a common label and jump to that label.
Fixes: 6bb14e48ee ("net/smc: dynamic allocation of CLC proposal buffer")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It's hard to read the code without spaces around '&',
for better reading, add spaces around '&'.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes coccicheck warnig:
net/mptcp/protocol.c:164:11-18: WARNING: Unsigned expression compared with zero: max_seq > 0
Fixes: ab174ad8ef ("mptcp: move ooo skbs into msk out of order queue")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tunnel offload info code uses ETHTOOL_MSG_TUNNEL_INFO_GET message type (cmd
field in genetlink header) for replies to tunnel info netlink request, i.e.
the same value as the request have. This is a problem because we are using
two separate enums for userspace to kernel and kernel to userspace message
types so that this ETHTOOL_MSG_TUNNEL_INFO_GET (28) collides with
ETHTOOL_MSG_CABLE_TEST_TDR_NTF which is what message type 28 means for
kernel to userspace messages.
As the tunnel info request reached mainline in 5.9 merge window, we should
still be able to fix the reply message type without breaking backward
compatibility.
Fixes: c7d759eb7b ("ethtool: add tunnel info interface")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
1. Change all "dev->hard_header" to "dev->header_ops"
2. On receiving incoming frames when header_ops == NULL:
The comment only says what is wrong, but doesn't say what is right.
This patch changes the comment to make it clear what is right.
3. On transmitting and receiving outgoing frames when header_ops == NULL:
The comment explains that the LL header will be later added by the driver.
However, I think it's better to simply say that the LL header is invisible
to us. This phrasing is better from a software engineering perspective,
because this makes it clear that what happens in the driver should be
hidden from us and we should not care about what happens internally in the
driver.
4. On resuming the LL header (for RAW frames) when header_ops == NULL:
The comment says we are "unlikely" to restore the LL header.
However, we should say that we are "unable" to restore it.
It's not possible (rather than not likely) to restore it, because:
1) There is no way for us to restore because the LL header internally
processed by the driver should be invisible to us.
2) In function packet_rcv and tpacket_rcv, the code only tries to restore
the LL header when header_ops != NULL.
Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
smc->clcsock and smc->clcsock->sk are used before the check if they can
be dereferenced. Fix this by checking the variables first.
Fixes: a60a2b1e0a ("net/smc: reduce active tcp_listen workers")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When we're handling TO_EXCLUDE report in EXCLUDE filter mode we should
not ignore the return value of __grp_src_toex_excl() as we'll miss
sending notifications about group changes.
Fixes: 5bf1e00b68 ("net: bridge: mcast: support for IGMPV3/MLDv2 CHANGE_TO_INCLUDE/EXCLUDE report")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the skb Tx path, transmission of a packet is performed with
dev_direct_xmit(). When NETDEV_TX_BUSY is set in the drivers, it
signifies that it was not possible to send the packet right now,
please try later. Unfortunately, the xsk transmit code discarded the
packet and returned EBUSY to the application. Fix this unnecessary
packet loss, by not discarding the packet in the Tx ring and return
EAGAIN. As EAGAIN is returned to the application, it can then retry
the send operation later and the packet will then likely be sent as
the driver will then likely have space/resources to send the packet.
In summary, EAGAIN tells the application that the packet was not
discarded from the Tx ring and that it needs to call send()
again. EBUSY, on the other hand, signifies that the packet was not
sent and discarded from the Tx ring. The application needs to put
the packet on the Tx ring again if it wants it to be sent.
Fixes: 35fcde7f8d ("xsk: support for Tx")
Reported-by: Arkadiusz Zema <A.Zema@falconvsystems.com>
Suggested-by: Arkadiusz Zema <A.Zema@falconvsystems.com>
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Link: https://lore.kernel.org/bpf/1600257625-2353-1-git-send-email-magnus.karlsson@gmail.com
Alexei Starovoitov says:
====================
pull-request: bpf 2020-09-15
The following pull-request contains BPF updates for your *net* tree.
We've added 12 non-merge commits during the last 19 day(s) which contain
a total of 10 files changed, 47 insertions(+), 38 deletions(-).
The main changes are:
1) docs/bpf fixes, from Andrii.
2) ld_abs fix, from Daniel.
3) socket casting helpers fix, from Martin.
4) hash iterator fixes, from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
To support modifying the used_maps array, we use a mutex to protect
the use of the counter and the array. The mutex is initialized right
after the prog aux is allocated, and destroyed right before prog
aux is freed. This way we guarantee it's initialized for both cBPF
and eBPF.
Signed-off-by: YiFei Zhu <zhuyifei@google.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Cc: YiFei Zhu <zhuyifei1999@gmail.com>
Link: https://lore.kernel.org/bpf/20200915234543.3220146-2-sdf@google.com
The bpf_skc_to_* type casting helpers are available to
BPF_PROG_TYPE_TRACING. The traced PTR_TO_BTF_ID may be NULL.
For example, the skb->sk may be NULL. Thus, these casting helpers
need to check "!sk" also and this patch fixes them.
Fixes: 0d4fad3e57 ("bpf: Add bpf_skc_to_udp6_sock() helper")
Fixes: 478cfbdf5f ("bpf: Add bpf_skc_to_{tcp, tcp_timewait, tcp_request}_sock() helpers")
Fixes: af7ec13833 ("bpf: Add bpf_skc_to_tcp6_sock() helper")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200915182959.241101-1-kafai@fb.com
Currently, the in-kernel delete notification is emitted from the error
path of nexthop_add() and replace_nexthop(), which can be confusing to
in-kernel listeners as they are not familiar with the nexthop.
Instead, only emit the notification when the nexthop is actually
deleted. The following sub-cases are covered:
1. User space deletes the nexthop
2. The nexthop is deleted by the kernel due to a netdev event (e.g.,
nexthop device going down)
3. A group is deleted because its last nexthop is being deleted
4. The network namespace of the nexthop device is deleted
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the only listener of the nexthop notification chain is the
VXLAN driver. Subsequent patches will add more listeners (e.g., device
drivers such as netdevsim) that need to be able to block when processing
notifications.
Therefore, convert the notification chain to a blocking one. This is
safe as notifications are always emitted from process context.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce a test command for health reporters. User might use this
command to trigger test event on a reporter if the reporter supports it.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kfir reported that pmtu exceptions are not created properly for
deployments where multipath routes use the same device.
After some digging I see 2 compounding problems:
1. ip_route_output_key_hash_rcu is updating the flowi4_oif *after*
the route lookup. This is the second use case where this has
been a problem (the first is related to use of vti devices with
VRF). I can not find any reason for the oif to be changed after the
lookup; the code goes back to the start of git. It does not seem
logical so remove it.
2. fib_lookups for exceptions do not call fib_select_path to handle
multipath route selection based on the hash.
The end result is that the fib_lookup used to add the exception
always creates it based using the first leg of the route.
An example topology showing the problem:
| host1
+------+
| eth0 | .209
+------+
|
+------+
switch | br0 |
+------+
|
+---------+---------+
| host2 | host3
+------+ +------+
| eth0 | .250 | eth0 | 192.168.252.252
+------+ +------+
+-----+ +-----+
| vti | .2 | vti | 192.168.247.3
+-----+ +-----+
\ /
=================================
tunnels
192.168.247.1/24
for h in host1 host2 host3; do
ip netns add ${h}
ip -netns ${h} link set lo up
ip netns exec ${h} sysctl -wq net.ipv4.ip_forward=1
done
ip netns add switch
ip -netns switch li set lo up
ip -netns switch link add br0 type bridge stp 0
ip -netns switch link set br0 up
for n in 1 2 3; do
ip -netns switch link add eth-sw type veth peer name eth-h${n}
ip -netns switch li set eth-h${n} master br0 up
ip -netns switch li set eth-sw netns host${n} name eth0
done
ip -netns host1 addr add 192.168.252.209/24 dev eth0
ip -netns host1 link set dev eth0 up
ip -netns host1 route add 192.168.247.0/24 \
nexthop via 192.168.252.250 dev eth0 nexthop via 192.168.252.252 dev eth0
ip -netns host2 addr add 192.168.252.250/24 dev eth0
ip -netns host2 link set dev eth0 up
ip -netns host2 addr add 192.168.252.252/24 dev eth0
ip -netns host3 link set dev eth0 up
ip netns add tunnel
ip -netns tunnel li set lo up
ip -netns tunnel li add br0 type bridge
ip -netns tunnel li set br0 up
for n in $(seq 11 20); do
ip -netns tunnel addr add dev br0 192.168.247.${n}/24
done
for n in 2 3
do
ip -netns tunnel link add vti${n} type veth peer name eth${n}
ip -netns tunnel link set eth${n} mtu 1360 master br0 up
ip -netns tunnel link set vti${n} netns host${n} mtu 1360 up
ip -netns host${n} addr add dev vti${n} 192.168.247.${n}/24
done
ip -netns tunnel ro add default nexthop via 192.168.247.2 nexthop via 192.168.247.3
ip netns exec host1 ping -M do -s 1400 -c3 -I 192.168.252.209 192.168.247.11
ip netns exec host1 ping -M do -s 1400 -c3 -I 192.168.252.209 192.168.247.15
ip -netns host1 ro ls cache
Before this patch the cache always shows exceptions against the first
leg in the multipath route; 192.168.252.250 per this example. Since the
hash has an initial random seed, you may need to vary the final octet
more than what is listed. In my tests, using addresses between 11 and 19
usually found 1 that used both legs.
With this patch, the cache will have exceptions for both legs.
Fixes: 4895c771c7 ("ipv4: Add FIB nexthop exceptions")
Reported-by: Kfir Itzhak <mastertheknife@gmail.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix parameter description of tipc_link_bc_create()
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 16ad3f4022 ("tipc: introduce variable window congestion control")
Signed-off-by: Lu Wei <luwei32@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently drivers have to report their pause frames statistics
via ethtool -S, and there is a wide variety of names used for
these statistics.
Add the two statistics defined in IEEE 802.3x to the standard
API. Create a new ethtool request header flag for including
statistics in the response to GET commands.
Always create the ETHTOOL_A_PAUSE_STATS nest in replies when
flag is set. Testing if driver declares the op is not a reliable
way of checking if any stats will actually be included and therefore
we don't want to give the impression that presence of
ETHTOOL_A_PAUSE_STATS indicates driver support.
Note that this patch does not include PFC counters, which may fit
better in dcbnl? But mostly I don't need them/have a setup to test
them so I haven't looked deeply into exposing them :)
v3:
- add a helper for "uninitializing" stats, rather than a cryptic
memset() (Andrew)
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
so the switchdev can notifiy the bridge to flush non-permanent fdb entries
for this port. This is useful whenever the hardware fdb of the switchdev
is reset, but the netdev and the bridgeport are not deleted.
Note that this has the same effect as the IFLA_BRPORT_FLUSH attribute.
CC: Jiri Pirko <jiri@resnulli.us>
CC: Ivan Vecera <ivecera@redhat.com>
CC: Roopa Prabhu <roopa@nvidia.com>
CC: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Acked-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Scenario:
* Multicast frame send from BLA backbone gateways (multiple nodes
with their bat0 bridged together, with BLA enabled) sharing the same
LAN to nodes in the mesh
Issue:
* Nodes receive the frame multiple times on bat0 from the mesh,
once from each foreign BLA backbone gateway which shares the same LAN
with another
For multicast frames via batman-adv broadcast packets coming from the
same BLA backbone but from different backbone gateways duplicates are
currently detected via a CRC history of previously received packets.
However this CRC so far was not performed for multicast frames received
via batman-adv unicast packets. Fixing this by appyling the same check
for such packets, too.
Room for improvements in the future: Ideally we would introduce the
possibility to not only claim a client, but a complete originator, too.
This would allow us to only send a multicast-in-unicast packet from a BLA
backbone gateway claiming the node and by that avoid potential redundant
transmissions in the first place.
Fixes: 279e89b228 ("batman-adv: add broadcast duplicate check")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Scenario:
* Multicast frame send from mesh to a BLA backbone (multiple nodes
with their bat0 bridged together, with BLA enabled)
Issue:
* BLA backbone nodes receive the frame multiple times on bat0,
once from mesh->bat0 and once from each backbone_gw from LAN
For unicast, a node will send only to the best backbone gateway
according to the TQ. However for multicast we currently cannot determine
if multiple destination nodes share the same backbone if they don't share
the same backbone with us. So we need to keep sending the unicasts to
all backbone gateways and let the backbone gateways decide which one
will forward the frame. We can use the CLAIM mechanism to make this
decision.
One catch: The batman-adv gateway feature for DHCP packets potentially
sends multicast packets in the same batman-adv unicast header as the
multicast optimizations code. And we are not allowed to drop those even
if we did not claim the source address of the sender, as for such
packets there is only this one multicast-in-unicast packet.
How can we distinguish the two cases?
The gateway feature uses a batman-adv unicast 4 address header. While
the multicast-to-unicasts feature uses a simple, 3 address batman-adv
unicast header. So let's use this to distinguish.
Fixes: fe2da6ff27 ("batman-adv: check incoming packet type for bla")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Scenario:
* Multicast frame send from a BLA backbone (multiple nodes with
their bat0 bridged together, with BLA enabled)
Issue:
* BLA backbone nodes receive the frame multiple times on bat0
For multicast frames received via batman-adv broadcast packets the
originator of the broadcast packet is checked before decapsulating and
forwarding the frame to bat0 (batadv_bla_is_backbone_gw()->
batadv_recv_bcast_packet()). If it came from a node which shares the
same BLA backbone with us then it is not forwarded to bat0 to avoid a
loop.
When sending a multicast frame in a non-4-address batman-adv unicast
packet we are currently missing this check - and cannot do so because
the batman-adv unicast packet has no originator address field.
However, we can simply fix this on the sender side by only sending the
multicast frame via unicasts to interested nodes which do not share the
same BLA backbone with us. This also nicely avoids some unnecessary
transmissions on mesh side.
Note that no infinite loop was observed, probably because of dropping
via batadv_interface_tx()->batadv_bla_tx(). However the duplicates still
utterly confuse switches/bridges, ICMPv6 duplicate address detection and
neighbor discovery and therefore leads to long delays before being able
to establish TCP connections, for instance. And it also leads to the Linux
bridge printing messages like:
"br-lan: received packet on eth1 with own address as source address ..."
Fixes: 2d3f6ccc4e ("batman-adv: Modified forwarding behaviour for multicast packets")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Fix a potential refcount warning that a zero value is increased to one
in xp_dma_map, by initializing the refcount to one to start with,
instead of zero plus a refcount_inc().
Fixes: 921b68692a ("xsk: Enable sharing of dma mappings")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/1600095036-23868-1-git-send-email-magnus.karlsson@gmail.com
For AF_XDP sockets, there was a discrepancy between the number of of
pinned pages and the size of the umem region.
The size of the umem region is used to validate the AF_XDP descriptor
addresses. The logic that pinned the pages covered by the region only
took whole pages into consideration, creating a mismatch between the
size and pinned pages. A user could then pass AF_XDP addresses outside
the range of pinned pages, but still within the size of the region,
crashing the kernel.
This change correctly calculates the number of pages to be
pinned. Further, the size check for the aligned mode is
simplified. Now the code simply checks if the size is divisible by the
chunk size.
Fixes: bbff2f321a ("xsk: new descriptor addressing scheme")
Reported-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Ciara Loftus <ciara.loftus@intel.com>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200910075609.7904-1-bjorn.topel@gmail.com
For EPOLLET, applications must call sendmsg until they get EAGAIN.
Otherwise, there is no guarantee that EPOLLOUT is sent if there was
a failure upon memory allocation.
As a result on high-speed NICs, userspace observes multiple small
sendmsgs after a partial sendmsg until EAGAIN, since TCP can send
1-2 TSOs in between two sendmsg syscalls:
// One large partial send due to memory allocation failure.
sendmsg(20MB) = 2MB
// Many small sends until EAGAIN.
sendmsg(18MB) = 64KB
sendmsg(17.9MB) = 128KB
sendmsg(17.8MB) = 64KB
...
sendmsg(...) = EAGAIN
// At this point, userspace can assume an EPOLLOUT.
To fix this, set the SOCK_NOSPACE on all partial sendmsg scenarios
to guarantee that we send EPOLLOUT after partial sendmsg.
After this commit userspace can assume that it will receive an EPOLLOUT
after the first partial sendmsg. This EPOLLOUT will benefit from
sk_stream_write_space() logic delaying the EPOLLOUT until significant
space is available in write queue.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If there was any event available on the TCP socket, tcp_poll()
will be called to retrieve all the events. In tcp_poll(), we call
sk_stream_is_writeable() which returns true as long as we are at least
one byte below notsent_lowat. This will result in quite a few
spurious EPLLOUT and frequent tiny sendmsg() calls as a result.
Similar to sk_stream_write_space(), use __sk_stream_is_writeable
with a wake value of 1, so that we set EPOLLOUT only if half the
space is available for write.
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In fl_set_erspan_opt(), all bits of erspan md was set 1, as this
function is also used to set opt MASK. However, when setting for
md->u.index for opt VALUE, the rest bits of the union md->u will
be left 1. It would cause to fail the match of the whole md when
version is 1 and only index is set.
This patch is to fix by initializing with 0 before setting erspan
md->u.
Reported-by: Shuang Li <shuali@redhat.com>
Fixes: 79b1011cb3 ("net: sched: allow flower to match erspan options")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As we can see from vxlan_build/parse_gbp_hdr(), when processing metadata
on vxlan rx/tx path, only dont_learn/policy_applied/policy_id fields can
be set to or parse from the packet for vxlan gbp option.
So do the mask when set it in lwtunnel, as it does in act_tunnel_key and
cls_flower.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As we can see from vxlan_build/parse_gbp_hdr(), when processing metadata
on vxlan rx/tx path, only dont_learn/policy_applied/policy_id fields can
be set to or parse from the packet for vxlan gbp option.
So we'd better do the mask when set it in act_tunnel_key and cls_flower.
Otherwise, when users don't know these bits, they may configure with a
value which can never be matched.
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In tipc_buf_append() it may change skb's frag_list, and it causes
problems when this skb is cloned. skb_unclone() doesn't really
make this skb's flag_list available to change.
Shuang Li has reported an use-after-free issue because of this
when creating quite a few macvlan dev over the same dev, where
the broadcast packets will be cloned and go up to the stack:
[ ] BUG: KASAN: use-after-free in pskb_expand_head+0x86d/0xea0
[ ] Call Trace:
[ ] dump_stack+0x7c/0xb0
[ ] print_address_description.constprop.7+0x1a/0x220
[ ] kasan_report.cold.10+0x37/0x7c
[ ] check_memory_region+0x183/0x1e0
[ ] pskb_expand_head+0x86d/0xea0
[ ] process_backlog+0x1df/0x660
[ ] net_rx_action+0x3b4/0xc90
[ ]
[ ] Allocated by task 1786:
[ ] kmem_cache_alloc+0xbf/0x220
[ ] skb_clone+0x10a/0x300
[ ] macvlan_broadcast+0x2f6/0x590 [macvlan]
[ ] macvlan_process_broadcast+0x37c/0x516 [macvlan]
[ ] process_one_work+0x66a/0x1060
[ ] worker_thread+0x87/0xb10
[ ]
[ ] Freed by task 3253:
[ ] kmem_cache_free+0x82/0x2a0
[ ] skb_release_data+0x2c3/0x6e0
[ ] kfree_skb+0x78/0x1d0
[ ] tipc_recvmsg+0x3be/0xa40 [tipc]
So fix it by using skb_unshare() instead, which would create a new
skb for the cloned frag and it'll be safe to change its frag_list.
The similar things were also done in sctp_make_reassembled_event(),
which is using skb_copy().
Reported-by: Shuang Li <shuali@redhat.com>
Fixes: 37e22164a8 ("tipc: rename and move message reassembly function")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tipc_group_add_to_tree() returns silently if `key` matches `nkey` of an
existing node, causing tipc_group_create_member() to leak memory. Let
tipc_group_add_to_tree() return an error in such a case, so that
tipc_group_create_member() can handle it properly.
Fixes: 75da2163db ("tipc: introduce communication groups")
Reported-and-tested-by: syzbot+f95d90c454864b3b5bc9@syzkaller.appspotmail.com
Cc: Hillf Danton <hdanton@sina.com>
Link: https://syzkaller.appspot.com/bug?id=048390604fe1b60df34150265479202f10e13aff
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A DSA master interface has upper network devices, each representing an
Ethernet switch port attached to it. Demultiplexing the source ports and
setting skb->dev accordingly is done through the catch-all ETH_P_XDSA
packet_type handler. Catch-all because DSA vendors have various header
implementations, which can be placed anywhere in the frame: before the
DMAC, before the EtherType, before the FCS, etc. So, the ETH_P_XDSA
handler acts like an rx_handler more than anything.
It is unlikely for the DSA master interface to have any other upper than
the DSA switch interfaces themselves. Only maybe a bridge upper*, but it
is very likely that the DSA master will have no 8021q upper. So
__netif_receive_skb_core() will try to untag the VLAN, despite the fact
that the DSA switch interface might have an 8021q upper. So the skb will
never reach that.
So far, this hasn't been a problem because most of the possible
placements of the DSA switch header mentioned in the first paragraph
will displace the VLAN header when the DSA master receives the frame, so
__netif_receive_skb_core() will not actually execute any VLAN-specific
code for it. This only becomes a problem when the DSA switch header does
not displace the VLAN header (for example with a tail tag).
What the patch does is it bypasses the untagging of the skb when there
is a DSA switch attached to this net device. So, DSA is the only
packet_type handler which requires seeing the VLAN header. Once skb->dev
will be changed, __netif_receive_skb_core() will be invoked again and
untagging, or delivery to an 8021q upper, will happen in the RX of the
DSA switch interface itself.
*see commit 9eb8eff0cf ("net: bridge: allow enslaving some DSA master
network devices". This is actually the reason why I prefer keeping DSA
as a packet_type handler of ETH_P_XDSA rather than converting to an
rx_handler. Currently the rx_handler code doesn't support chaining, and
this is a problem because a DSA master might be bridged.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
flowi4_multipath_hash was added by the commit referenced below for
tunnels. Unfortunately, the patch did not initialize the new field
for several fast path lookups that do not initialize the entire flow
struct to 0. Fix those locations. Currently, flowi4_multipath_hash
is random garbage and affects the hash value computed by
fib_multipath_hash for multipath selection.
Fixes: 24ba14406c ("route: Add multipath_hash in flowi_common to make user-define hash")
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
flush_all_backlogs() may cause deadlock on systems
running processes with FIFO scheduling policy.
The above is critical in -RT scenarios, where user-space
specifically ensure no network activity is scheduled on
the CPU running the mentioned FIFO process, but still get
stuck.
This commit tries to address the problem checking the
backlog status on the remote CPUs before scheduling the
flush operation. If the backlog is empty, we can skip it.
v1 -> v2:
- explicitly clear flushed cpu mask - Eric
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=0qvR
-----END PGP SIGNATURE-----
Merge tag 'rxrpc-next-20200914' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc: Fixes for the connection manager rewrite
Here are some fixes for the connection manager rewrite:
(1) Fix a goto to the wrong place in error handling.
(2) Fix a missing NULL pointer check.
(3) The stored allocation error needs to be stored signed.
(4) Fix a leak of connection bundle when clearing connections due to
net namespace exit.
(5) Fix an overget of the bundle when setting up a new client conn.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
SOCK_QUEUE_SHRUNK is currently used by TCP as a temporary state
that remembers if some room has been made in the rtx queue
by an incoming ACK packet.
This is later used from tcp_check_space() before
considering to send EPOLLOUT.
Problem is: If we receive SACK packets, and no packet
is removed from RTX queue, we can send fresh packets, thus
moving them from write queue to rtx queue and eventually
empty the write queue.
This stall can happen if TCP_NOTSENT_LOWAT is used.
With this fix, we no longer risk stalling sends while holes
are repaired, and we can fully use socket sndbuf.
This also removes a cache line dirtying for typical RPC
workloads.
Fixes: c9bee3b7fd ("tcp: TCP_NOTSENT_LOWAT socket option")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This comment is outdated and no longer reflects the actual implementation
of af_packet.c.
Reasons for the new comment:
1.
In af_packet.c, the function packet_snd first reserves a headroom of
length (dev->hard_header_len + dev->needed_headroom).
Then if the socket is a SOCK_DGRAM socket, it calls dev_hard_header,
which calls dev->header_ops->create, to create the link layer header.
If the socket is a SOCK_RAW socket, it "un-reserves" a headroom of
length (dev->hard_header_len), and checks if the user has provided a
header sized between (dev->min_header_len) and (dev->hard_header_len)
(in dev_validate_header).
This shows the developers of af_packet.c expect hard_header_len to
be consistent with header_ops.
2.
In af_packet.c, the function packet_sendmsg_spkt has a FIXME comment.
That comment states that prepending an LL header internally in a driver
is considered a bug. I believe this bug can be fixed by setting
hard_header_len to 0, making the internal header completely invisible
to af_packet.c (and requesting the headroom in needed_headroom instead).
3.
There is a commit for a WiFi driver:
commit 9454f7a895 ("mwifiex: set needed_headroom, not hard_header_len")
According to the discussion about it at:
https://patchwork.kernel.org/patch/11407493/
The author tried to set the WiFi driver's hard_header_len to the Ethernet
header length, and request additional header space internally needed by
setting needed_headroom.
This means this usage is already adopted by driver developers.
Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
That is needed to let the subflows announce promptly when new
space is available in the receive buffer.
tcp_cleanup_rbuf() is currently a static function, drop the
scope modifier and add a declaration in the TCP header.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update the scheduler to less trivial heuristic: cache
the last used subflow, and try to send on it a reasonably
long burst of data.
When the burst or the subflow send space is exhausted, pick
the subflow with the lower ratio between write space and
send buffer - that is, the subflow with the greater relative
amount of free space.
v1 -> v2:
- fix 32 bit build breakage due to 64bits div
- fix checkpath issues (uint64_t -> u64)
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the 'backup' attribute of local endpoint
is ignored. Let's use it for the MP_JOIN handshake
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
So that can be accessed easily from the subflow creation
helper. No functional change intended.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a bunch of MPTCP mibs related to MPTCP OoO data
processing.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is no need to use the tcp_read_sock(), we can
simply drop the skb. Additionally try to look at the
next buffer for in order data.
This both simplifies the code and avoid unneeded indirect
calls.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add an RB-tree to cope with OoO (at MPTCP level) data.
__mptcp_move_skb() insert into the RB tree "future"
data, eventually coalescing skb as allowed by the
MPTCP DSN.
To simplify sequence accounting, move the DSN inside
the cb.
After successfully enqueuing in sequence data, check
if we can use any data from the RB tree.
Additionally move the data_fin check after spooling
data from the OoO tree, otherwise we could miss shutdown
events.
The RB tree code is copied as verbatim as possible
from tcp_data_queue_ofo(), with a few simplifications
due to the fact that MPTCP doesn't need to cope with
sacks. All bugs here are added by me.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Factor-out existing code, will be re-used by the
next patch.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Let the msk sendbuf track the size of the larger subflow's
send window, so that we ensure mptcp_sendmsg() does not
exceed MPTCP-level send window.
The update is performed just before try to send any data.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a prerequisite to allow receiving data from multiple
subflows without re-injection.
Instead of dropping the OoO - "future" data in
subflow_check_data_avail(), call into __mptcp_move_skbs()
and let the msk drop that.
To avoid code duplication factor out the mptcp_subflow_discard_data()
helper.
Note that __mptcp_move_skbs() can now find multiple subflows
with data avail (comprising to-be-discarded data), so must
update the byte counter incrementally.
v1 -> v2:
- fix checkpatch issues (unsigned -> unsigned int)
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This simplify mptcp_subflow_data_available() and will
made follow-up patches simpler.
Additionally remove the unneeded checks on subflow copied_seq:
we always whole skbs out of subflows.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, when checking for the 'msk is writable' condition, we
look at the individual subflows write space.
That works well while we send data via a single subflow, but will
not as soon as we will enable concurrent xmit on multiple subflows.
With this change msk becomes writable when the following conditions
hold:
- the socket has some free write space
- there is at least a subflow with write free space
Additionally we need to set the NOSPACE bit on all subflows
before blocking.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The fix for receiving (internally generated) bla packets outside the
interrupt context introduced the usage of in_interrupt(). But this
functionality is only defined in linux/preempt.h which was not included
with the same patch.
Fixes: 279e89b228 ("batman-adv: bla: use netif_rx_ni when not in interrupt context")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Currently, the controller will continue advertising when the system
enters suspend. This patch makes sure that all advertising instances are
paused when entering suspend, and resumed when suspend exits.
The Advertising and Suspend/Resume test suites were both run on this
change on 4.19 kernel with both hardware offloaded multi-advertising and
software rotated multi-advertising. In addition, a new test was added
that performs the following steps:
* Register 3 advertisements via bluez RegisterAdvertisement
* Verify reception of all advertisements by remote peer
* Enter suspend on DUT
* Verify failure to receive all advertisements by remote peer
* Exit suspend on DUT
* Verify reception of all advertisements by remote peer
Signed-off-by: Daniel Winkler <danielwinkler@google.com>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
When setting up a client connection, a second ref is accidentally obtained
on the connection bundle (we get one when allocating the conn and a second
one when adding the conn to the bundle).
Fix it to only use the ref obtained by rxrpc_alloc_client_connection() and
not to add a second when adding the candidate conn to the bundle.
Fixes: 245500d853 ("rxrpc: Rewrite the client connection manager")
Signed-off-by: David Howells <dhowells@redhat.com>
The alloc_error field in the rxrpc_bundle struct should be signed as it has
negative error codes assigned to it. Checks directly on it may then fail,
and may produce a warning like this:
net/rxrpc/conn_client.c:662 rxrpc_wait_for_channel()
warn: 'bundle->alloc_error' is unsigned
Fixes: 245500d853 ("rxrpc: Rewrite the client connection manager")
Reported-by Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Fix an error-handling goto in rxrpc_connect_call() whereby it will jump to
free the bundle it failed to allocate.
Fixes: 245500d853 ("rxrpc: Rewrite the client connection manager")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Emit controller suspend and resume events when we are ready for suspend
and we've resumed from suspend.
The controller suspend event will report whatever suspend state was
successfully entered. The controller resume event will check the first
HCI event that was received after we finished preparing for suspend and,
if it was a connection event, store the address of the peer that caused
the event. If it was not a connection event, we mark the wake reason as
an unexpected event.
Here is a sample btmon trace with these events:
@ MGMT Event: Controller Suspended (0x002d) plen 1
Suspend state: Page scanning and/or passive scanning (2)
@ MGMT Event: Controller Resumed (0x002e) plen 8
Wake reason: Remote wake due to peer device connection (2)
LE Address: CD:F3:CD:13:C5:9A (OUI CD-F3-CD)
Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Add the controller suspend and resume events, which will signal when
Bluetooth has completed preparing for suspend and when it's ready for
resume.
Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Only set extended scan response only when it exists. Otherwise, clear
the scan response data.
Per the core spec v5.2, Vol 4, Part E, 7.8.55
If the advertising set is non-scannable and the Host uses this command
other than to discard existing data, the Controller shall return the
error code Invalid HCI Command Parameters (0x12).
On WCN3991, the controller correctly responds with Invalid Parameters
when this is sent. That error causes __hci_req_hci_power_on to fail
with -EINVAL and LE devices can't connect because background scanning
isn't configured.
Here is an hci trace of where this issue occurs during power on:
< HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25
Handle: 0x00
Properties: 0x0010
Use legacy advertising PDUs: ADV_NONCONN_IND
Min advertising interval: 181.250 msec (0x0122)
Max advertising interval: 181.250 msec (0x0122)
Channel map: 37, 38, 39 (0x07)
Own address type: Random (0x01)
Peer address type: Public (0x00)
Peer address: 00:00:00:00:00:00 (OUI 00-00-00)
Filter policy: Allow Scan Request from Any, Allow Connect...
TX power: 127 dbm (0x7f)
Primary PHY: LE 1M (0x01)
Secondary max skip: 0x00
Secondary PHY: LE 1M (0x01)
SID: 0x00
Scan request notifications: Disabled (0x00)
> HCI Event: Command Complete (0x0e) plen 5
LE Set Extended Advertising Parameters (0x08|0x0036) ncmd 1
Status: Success (0x00)
TX power (selected): 9 dbm (0x09)
< HCI Command: LE Set Advertising Set Random Address (0x08|0x0035) plen 7
Advertising handle: 0x00
Advertising random address: 08:FD:55:ED:22:28 (OUI 08-FD-55)
> HCI Event: Command Complete (0x0e) plen 4
LE Set Advertising Set Random Address (0x08|0x0035) ncmd
Status: Success (0x00)
< HCI Command: LE Set Extended Scan Response Data (0x08|0x0038) plen 35
Handle: 0x00
Operation: Complete scan response data (0x03)
Fragment preference: Minimize fragmentation (0x01)
Data length: 0x0d
Name (short): Chromebook
> HCI Event: Command Complete (0x0e) plen 4
LE Set Extended Scan Response Data (0x08|0x0038) ncmd 1
Status: Invalid HCI Command Parameters (0x12)
Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: Daniel Winkler <danielwinkler@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This reverts commit 314f76d7a6.
Citing that commit message, the call graph was:
dsa_slave_vlan_rx_add_vid dsa_port_setup_8021q_tagging
| |
| |
| +-------------+
| |
v v
dsa_port_vid_add dsa_slave_port_obj_add
| |
+-------+ +-------+
| |
v v
dsa_port_vlan_add
Now that tag_8021q has its own ops structure, it no longer relies on
dsa_port_vid_add, and therefore on the dsa_switch_ops to install its
VLANs.
So dsa_port_vid_add now only has one single caller. So we can simplify
the call graph to what it was before, aka:
dsa_slave_vlan_rx_add_vid dsa_slave_port_obj_add
| |
+-------+ +-------+
| |
v v
dsa_port_vlan_add
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While working on another tag_8021q driver implementation, some things
became apparent:
- It is not mandatory for a DSA driver to offload the tag_8021q VLANs by
using the VLAN table per se. For example, it can add custom TCAM rules
that simply encapsulate RX traffic, and redirect & decapsulate rules
for TX traffic. For such a driver, it makes no sense to receive the
tag_8021q configuration through the same callback as it receives the
VLAN configuration from the bridge and the 8021q modules.
- Currently, sja1105 (the only tag_8021q user) sets a
priv->expect_dsa_8021q variable to distinguish between the bridge
calling, and tag_8021q calling. That can be improved, to say the
least.
- The crosschip bridging operations are, in fact, stateful already. The
list of crosschip_links must be kept by the caller and passed to the
relevant tag_8021q functions.
So it would be nice if the tag_8021q configuration was more
self-contained. This patch attempts to do that.
Create a struct dsa_8021q_context which encapsulates a struct
dsa_switch, and has 2 function pointers for adding and deleting a VLAN.
These will replace the previous channel to the driver, which was through
the .port_vlan_add and .port_vlan_del callbacks of dsa_switch_ops.
Also put the list of crosschip_links into this dsa_8021q_context.
Drivers that don't support cross-chip bridging can simply omit to
initialize this list, as long as they dont call any cross-chip function.
The sja1105_vlan_add and sja1105_vlan_del functions are refactored into
a smaller sja1105_vlan_add_one, which now has 2 entry points:
- sja1105_vlan_add, from struct dsa_switch_ops
- sja1105_dsa_8021q_vlan_add, from the tag_8021q ops
But even this change is fairly trivial. It just reflects the fact that
for sja1105, the VLANs from these 2 channels end up in the same hardware
table. However that is not necessarily true in the general sense (and
that's the reason for making this change).
The rest of the patch is mostly plain refactoring of "ds" -> "ctx". The
dsa_8021q_context structure needs to be propagated because adding a VLAN
is now done through the ops function pointers inside of it.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is no point in calling dsa_port_setup_8021q_tagging for each
individual port. Additionally, it will become more difficult to do that
when we'll have a context structure to tag_8021q (next patch). So
refactor this now.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It's possible that the user specifies an interval that couldn't allow
any packet to be transmitted. This also avoids the issue of the
hrtimer handler starving the other threads because it's running too
often.
The solution is to reject interval sizes that according to the current
link speed wouldn't allow any packet to be transmitted.
Reported-by: syzbot+8267241609ae8c23b248@syzkaller.appspotmail.com
Fixes: 5a781ccbd1 ("tc: Add support for configuring the taprio scheduler")
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Each MDB entry is encoded in a nested netlink attribute called
'MDBA_MDB_ENTRY'. In turn, this attribute contains another nested
attributed called 'MDBA_MDB_ENTRY_INFO', which encodes a single port
group entry within the MDB entry.
The cited commit added the ability to restart a dump from a specific
port group entry. However, on failure to add a port group entry to the
dump the entire MDB entry (stored in 'nest2') is removed, resulting in
missing port group entries.
Fix this by finalizing the MDB entry with the partial list of already
encoded port group entries.
Fixes: 5205e919c9 ("net: bridge: mcast: add support for src list and filter mode dumping")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The variable err is being initialized with a value that is never read and
it is being updated later with a new value. The initialization is redundant
and can be removed. Also re-order variable declarations in reverse
Christmas tree ordering.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For new advertising features, it will be important for userspace to
know the capabilities of the controller and kernel. If the controller
and kernel support extended advertising, we include flags indicating
hardware offloading support and support for setting tx power of adv
instances.
In the future, vendor-specific commands may allow the setting of tx
power in advertising instances, but for now this feature is only
marked available if extended advertising is supported.
This change is manually verified in userspace by ensuring the
advertising manager's supported_flags field is updated with new flags on
hatch chromebook (ext advertising supported).
Signed-off-by: Daniel Winkler <danielwinkler@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Here we make sure we properly report the number of supported
advertising slots when we are using hardware offloading. If no
hardware offloading is available, we default this value to
HCI_MAX_ADV_INSTANCES for use in software rotation as before.
This change has been tested on kukui (no ext adv) and hatch (ext adv)
chromebooks by verifying "SupportedInstances" shows 5 (the default) and
6 (slots supported by controller), respectively.
Signed-off-by: Daniel Winkler <danielwinkler@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch defines new getsockopt options BT_SNDMTU/BT_RCVMTU
for SCO socket to be compatible with other bluetooth sockets.
These new options return the same value as option SCO_OPTIONS
which is already present on existing kernels.
Signed-off-by: Joseph Hwang <josephsih@chromium.org>
Reviewed-by: Alain Michaud <alainm@chromium.org>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Unregister_pm_notifier is a blocking call so suspend tasks should be
cleared beforehand. Otherwise, the notifier will wait for completion
before returning (and we encounter a 2s timeout on resume).
Fixes: 0e9952804e (Bluetooth: Clear suspend tasks on unregister)
Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The RC4-HMAC-MD5 KerberosV algorithm is based on RFC 4757 [0], which
was specifically issued for interoperability with Windows 2000, but was
never intended to receive the same level of support. The RFC says
The IETF Kerberos community supports publishing this specification as
an informational document in order to describe this widely
implemented technology. However, while these encryption types
provide the operations necessary to implement the base Kerberos
specification [RFC4120], they do not provide all the required
operations in the Kerberos cryptography framework [RFC3961]. As a
result, it is not generally possible to implement potential
extensions to Kerberos using these encryption types. The Kerberos
encryption type negotiation mechanism [RFC4537] provides one approach
for using such extensions even when a Kerberos infrastructure uses
long-term RC4 keys. Because this specification does not implement
operations required by RFC 3961 and because of security concerns with
the use of RC4 and MD4 discussed in Section 8, this specification is
not appropriate for publication on the standards track.
The RC4-HMAC encryption types are used to ease upgrade of existing
Windows NT environments, provide strong cryptography (128-bit key
lengths), and provide exportable (meet United States government
export restriction requirements) encryption. This document describes
the implementation of those encryption types.
Furthermore, this RFC was re-classified as 'historic' by RFC 8429 [1] in
2018, stating that 'none of the encryption types it specifies should be
used'
Note that other outdated algorithms are left in place (some of which are
guarded by CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES), so this should only
adversely affect interoperability with Windows NT/2000 systems that have
not received any updates since 2008 (but are connected to a network
nonetheless)
[0] https://tools.ietf.org/html/rfc4757
[1] https://tools.ietf.org/html/rfc8429
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Simplify tcp_set_congestion_control() by removing the initialization
code path for the !load case.
There are only two call sites for tcp_set_congestion_control(). The
EBPF call site is the only one that passes load=false; it also passes
cap_net_admin=true. Because of that, the exact same behavior can be
achieved by removing the special if (!load) branch of the logic. Both
before and after this commit, the EBPF case will call
bpf_try_module_get(), and if that succeeds then call
tcp_reinit_congestion_control() or if that fails then return EBUSY.
Note that this returns the logic to a structure very similar to the
structure before:
commit 91b5b21c7c ("bpf: Add support for changing congestion control")
except that the CAP_NET_ADMIN status is passed in as a function
argument.
This clean-up was suggested by Martin KaFai Lau.
Suggested-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Lawrence Brakmo <brakmo@fb.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Kevin Yang <yyd@google.com>
Now that the previous patches have removed the code that uses the
flags argument to _bpf_setsockopt(), we can remove that argument.
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Kevin Yang <yyd@google.com>
Cc: Lawrence Brakmo <brakmo@fb.com>
Now that the previous patches ensure that all call sites for
tcp_set_congestion_control() want to initialize congestion control, we
can simplify tcp_set_congestion_control() by removing the reinit
argument and the code to support it.
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Kevin Yang <yyd@google.com>
Cc: Lawrence Brakmo <brakmo@fb.com>
Now that the previous patch ensures we don't initialize the congestion
control twice, when EBPF sets the congestion control algorithm at
connection establishment we can simplify the code by simply
initializing the congestion control module at that time.
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Kevin Yang <yyd@google.com>
Cc: Lawrence Brakmo <brakmo@fb.com>
Change tcp_init_transfer() to only initialize congestion control if it
has not been initialized already.
With this new approach, we can arrange things so that if the EBPF code
sets the congestion control by calling setsockopt(TCP_CONGESTION) then
tcp_init_transfer() will not re-initialize the CC module.
This is an approach that has the following beneficial properties:
(1) This allows CC module customizations made by the EBPF called in
tcp_init_transfer() to persist, and not be wiped out by a later
call to tcp_init_congestion_control() in tcp_init_transfer().
(2) Does not flip the order of EBPF and CC init, to avoid causing bugs
for existing code upstream that depends on the current order.
(3) Does not cause 2 initializations for for CC in the case where the
EBPF called in tcp_init_transfer() wants to set the CC to a new CC
algorithm.
(4) Allows follow-on simplifications to the code in net/core/filter.c
and net/ipv4/tcp_cong.c, which currently both have some complexity
to special-case CC initialization to avoid double CC
initialization if EBPF sets the CC.
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Kevin Yang <yyd@google.com>
Cc: Lawrence Brakmo <brakmo@fb.com>
There are 6 types of workers which exist per smc connection. 3 of them
are used for listen and handshake processing, another 2 are used for
close and abort processing and 1 is the tx worker that moves calls to
sleeping functions into a worker.
To prevent flooding of the system work queue when many connections are
opened or closed at the same time (some pattern uperf implements), move
those workers to one of 3 smc-specific work queues. Two work queues are
module-global and used for handshake and close workers. The third work
queue is defined per link group and used by the tx workers that may
sleep waiting for resources of this link group.
And in smc_llc_enqueue() queue the llc_event_work work to the system
prio work queue because its critical that this work is started fast.
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the netlink messages to be sent to the userspace
are too big for a single netlink message, send them in
chunks using the netlink_dump infrastructure. Modify the
smc diag dump code so that it can signal to the netlink_dump
infrastructure that it needs to send more data.
Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
smc_lgr_cleanup_early() schedules the free worker with delay. DMB
unregistering occurs in this delayed worker increasing the risk
to reach the SMCD SBA limit without need. Terminate the
linkgroup immediately, since termination means early DMB unregistering.
For SMCD the global smc_server_lgr_pending lock is given up early.
A linkgroup to be given up with smc_lgr_cleanup_early() may already
contain more than one connection. Using __smc_lgr_terminate() in
smc_lgr_cleanup_early() covers this.
And consolidate smc_ism_put_vlan() and smc_put_device() into smc_lgr_free()
only.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
smc_listen_work() contains already an smc_listen_decline() exit.
Use this exit for smc_listen_rdma_finish() problems as well.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move check whether peer can be reached into smc_pnet_find_ism_by_pnetid().
Thus searching continues for another ism device, if check fails.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
smc_clc_send_accept() and smc_clc_send_confirm() are quite similar.
Move common code into a separate function smc_clc_send_confirm_accept().
And introduce separate SMCD and SMCR struct definitions for CLC accept
resp. confirm.
No functional change.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reduce stack size for smc_listen_work() and smc_clc_send_proposal()
by dynamic allocation of the CLC buffer to be received or sent.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Field names "srv_first_contact" and "cln_first_contact" are misleading,
since they apply to both, server and client. Rename them to
"first_contact_peer" and "first_contact_local".
Rename "ism_gid" by the more precise name "ism_peer_gid".
Rename version constant "SMC_CLC_V1" into "SMC_V1".
No functional change.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SMC starts a separate tcp_listen worker for every SMC socket in
state SMC_LISTEN, and can accept an incoming connection request only,
if this worker is really running and waiting in kernel_accept(). But
the number of running workers is limited.
This patch reworks the listening SMC code and starts a tcp_listen worker
after the SYN-ACK handshake on the internal clc-socket only.
Suggested-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Reviewed-by: Guvenc Gulce <guvenc@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The parameter passed via DCB_ATTR_DCB_BUFFER is a struct dcbnl_buffer. The
field prio2buffer is an array of IEEE_8021Q_MAX_PRIORITIES bytes, where
each value is a number of a buffer to direct that priority's traffic to.
That value is however never validated to lie within the bounds set by
DCBX_MAX_BUFFERS. The only driver that currently implements the callback is
mlx5 (maintainers CCd), and that does not do any validation either, in
particual allowing incorrect configuration if the prio2buffer value does
not fit into 4 bits.
Instead of offloading the need to validate the buffer index to drivers, do
it right there in core, and bounce the request if the value is too large.
CC: Parav Pandit <parav@nvidia.com>
CC: Saeed Mahameed <saeedm@nvidia.com>
Fixes: e549f6f9c0 ("net/dcb: Add dcbnl buffer attribute")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a netdev is enslaved to a bridge, its parent identifier is queried.
This is done so that packets that were already forwarded in hardware
will not be forwarded again by the bridge device between netdevs
belonging to the same hardware instance.
The operation fails when the netdev is an upper of netdevs with
different parent identifiers.
Instead of failing the enslavement, have dev_get_port_parent_id() return
'-EOPNOTSUPP' which will signal the bridge to skip the query operation.
Other callers of the function are not affected by this change.
Fixes: 7e1146e8c1 ("net: devlink: introduce devlink_compat_switch_id_get() helper")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reported-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit 8d7017fd62 ("blackhole_netdev: use blackhole_netdev to
invalidate dst entries"), we use blackhole_netdev to invalidate dst entries
instead of loopback device anymore.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit adds a new TCP feature to reflect the tos value received in
SYN, and send it out on the SYN-ACK, and eventually set the tos value of
the established socket with this reflected tos value. This provides a
way to set the traffic class/QoS level for all traffic in the same
connection to be the same as the incoming SYN request. It could be
useful in data centers to provide equivalent QoS according to the
incoming request.
This feature is guarded by /proc/sys/net/ipv4/tcp_reflect_tos, and is by
default turned off.
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit adds tos as a new passed in parameter to
ip_build_and_send_pkt() which will be used in the later commit.
This is a pure restructure and does not have any functional change.
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A new field is added to the request sock to record the TOS value
received on the listening socket during 3WHS:
When not under syn flood, it is recording the TOS value sent in SYN.
When under syn flood, it is recording the TOS value sent in the ACK.
This is a preparation patch in order to do TOS reflection in the later
commit.
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
netpoll needs to traverse dev->napi_list under RCU, make
sure it uses the right iterator and that removal from this
list is handled safely.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
To RCUify napi->dev_list we need to replace list_del_init()
with list_del_rcu(). There is no _init() version for RCU for
obvious reasons. Up until now netif_napi_del() was idempotent
so to make sure it remains such add a bit which is set when
NAPI is listed, and cleared when it removed. Since we don't
expect multiple calls to netif_napi_add() to be correct,
add a warning on that side.
Now that napi_hash_add / napi_hash_del are only called by
napi_add / del we can actually steal its bit. We just need
to make sure hash node is initialized correctly.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We allow drivers to call napi_hash_del() before calling
netif_napi_del() to batch RCU grace periods. This makes
the API asymmetric and leaks internal implementation details.
Soon we will want the grace period to protect more than just
the NAPI hash table.
Restructure the API and have drivers call a new function -
__netif_napi_del() if they want to take care of RCU waits.
Note that only core was checking the return status from
napi_hash_del() so the new helper does not report if the
NAPI was actually deleted.
Some notes on driver oddness:
- veth observed the grace period before calling netif_napi_del()
but that should not matter
- myri10ge observed normal RCU flavor
- bnx2x and enic did not actually observe the grace period
(unless they did so implicitly)
- virtio_net and enic only unhashed Rx NAPIs
The last two points seem to indicate that the calls to
napi_hash_del() were a left over rather than an optimization.
Regardless, it's easy enough to correct them.
This patch may introduce extra synchronize_net() calls for
interfaces which set NAPI_STATE_NO_BUSY_POLL and depend on
free_netdev() to call netif_napi_del(). This seems inevitable
since we want to use RCU for netpoll dev->napi_list traversal,
and almost no drivers set IFF_DISABLE_NETPOLL.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Following change will add support for a corner case where
we may not have a netdev to pass to devlink_port_type_eth_set()
but we still want to set port type.
This is definitely a corner case, and drivers should not normally
pass NULL netdev - print a warning message when this happens.
Sadly for other port types (ib) switches don't have a device
reference, the way we always do for Ethernet, so we can't put
the warning in __devlink_port_type_set().
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently there is concurrent reset and enqueue operation for the
same lockless qdisc when there is no lock to synchronize the
q->enqueue() in __dev_xmit_skb() with the qdisc reset operation in
qdisc_deactivate() called by dev_deactivate_queue(), which may cause
out-of-bounds access for priv->ring[] in hns3 driver if user has
requested a smaller queue num when __dev_xmit_skb() still enqueue a
skb with a larger queue_mapping after the corresponding qdisc is
reset, and call hns3_nic_net_xmit() with that skb later.
Reused the existing synchronize_net() in dev_deactivate_many() to
make sure skb with larger queue_mapping enqueued to old qdisc(which
is saved in dev_queue->qdisc_sleeping) will always be reset when
dev_reset_queue() is called.
Fixes: 6b3ba9146f ("net: sched: allow qdiscs to handle locking")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add bpf_iter support for sockmap / sockhash, based on the bpf_sk_storage and
hashtable implementation. sockmap and sockhash share the same iteration
context: a pointer to an arbitrary key and a pointer to a socket. Both
pointers may be NULL, and so BPF has to perform a NULL check before accessing
them. Technically it's not possible for sockhash iteration to yield a NULL
socket, but we ignore this to be able to use a single iteration point.
Iteration will visit all keys that remain unmodified during the lifetime of
the iterator. It may or may not visit newly added ones.
Switch from using rcu_dereference_raw to plain rcu_dereference, so we gain
another guard rail if CONFIG_PROVE_RCU is enabled.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200909162712.221874-3-lmb@cloudflare.com
The lookup paths for sockmap and sockhash currently include a check
that returns NULL if the socket we just found is not a full socket.
However, this check is not necessary. On insertion we ensure that
we have a full socket (caveat around sock_ops), so request sockets
are not a problem. Time-wait sockets are allocated separate from
the original socket and then fed into the hashdance. They don't
affect the sockets already stored in the sockmap.
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200909162712.221874-2-lmb@cloudflare.com
This patch set the init remote_id to zero, otherwise it will be a random
number.
Then it added the missing subflow's remote_id setting code both in
__mptcp_subflow_connect and in subflow_ulp_clone.
Fixes: 01cacb00b3 ("mptcp: add netlink-based PM")
Fixes: ec3edaa7ca ("mptcp: Add handling of outgoing MP_JOIN requests")
Fixes: f296234c98 ("mptcp: Add handling of incoming MP_JOIN requests")
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
In mptcp_pm_nl_get_local_id, skc_local is the same as msk_local, so it
always return 0. Thus every subflow's local_id is 0. It's incorrect.
This patch fixed this issue.
Also, we need to ignore the zero address here, like 0.0.0.0 in IPv4. When
we use the zero address as a local address, it means that we can use any
one of the local addresses. The zero address is not a new address, we don't
need to add it to PM, so this patch added a new function address_zero to
check whether an address is the zero address, if it is, we ignore this
address.
Fixes: 01cacb00b3 ("mptcp: add netlink-based PM")
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Insert the full 16 bit VIF ID into ipmr Netlink cache reports.
The VIF_ID attribute has 32 bits of space so can store the full VIF ID
extracted from the high and low byte fields in the igmpmsg.
Signed-off-by: Paul Davey <paul.davey@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the unused3 byte in struct igmpmsg to hold the high 8 bits of the
VIF ID.
If using more than 255 IPv4 multicast interfaces it is necessary to have
access to a VIF ID for cache reports that is wider than 8 bits, the VIF
ID present in the igmpmsg reports sent to mroute_sk was only 8 bits wide
in the igmpmsg header. Adding the high 8 bits of the 16 bit VIF ID in
the unused byte allows use of more than 255 IPv4 multicast interfaces.
Signed-off-by: Paul Davey <paul.davey@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Insert the multicast route table ID as a Netlink attribute to Netlink
cache report notifications.
When multiple route tables are in use it is necessary to have a way to
determine which route table a given cache report belongs to when
receiving the cache report.
Signed-off-by: Paul Davey <paul.davey@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
I confirmed that the problem fixed by commit 2a63866c8b ("tipc: fix
shutdown() of connectionless socket") also applies to stream socket.
----------
#include <sys/socket.h>
#include <unistd.h>
#include <sys/wait.h>
int main(int argc, char *argv[])
{
int fds[2] = { -1, -1 };
socketpair(PF_TIPC, SOCK_STREAM /* or SOCK_DGRAM */, 0, fds);
if (fork() == 0)
_exit(read(fds[0], NULL, 1));
shutdown(fds[0], SHUT_RDWR); /* This must make read() return. */
wait(NULL); /* To be woken up by _exit(). */
return 0;
}
----------
Since shutdown(SHUT_RDWR) should affect all processes sharing that socket,
unconditionally setting sk->sk_shutdown to SHUTDOWN_MASK will be the right
behavior.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that controller number attribute is available, use it when
building phsy_port_name for external controller ports.
An example devlink port and representor netdev name consist of controller
annotation for external controller with controller number = 1,
for a VF 1 of PF 0:
$ devlink port show pci/0000:06:00.0/2
pci/0000:06:00.0/2: type eth netdev ens2f0c1pf0vf1 flavour pcivf controller 1 pfnum 0 vfnum 1 external true splittable false
function:
hw_addr 00:00:00:00:00:00
$ devlink port show pci/0000:06:00.0/2 -jp
{
"port": {
"pci/0000:06:00.0/2": {
"type": "eth",
"netdev": "ens2f0c1pf0vf1",
"flavour": "pcivf",
"controller": 1,
"pfnum": 0,
"vfnum": 1,
"external": true,
"splittable": false,
"function": {
"hw_addr": "00:00:00:00:00:00"
}
}
}
}
Controller number annotation is skipped for non external controllers to
maintain backward compatibility.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A devlink port may be for a controller consist of PCI device.
A devlink instance holds ports of two types of controllers.
(1) controller discovered on same system where eswitch resides
This is the case where PCI PF/VF of a controller and devlink eswitch
instance both are located on a single system.
(2) controller located on external host system.
This is the case where a controller is located in one system and its
devlink eswitch ports are located in a different system.
When a devlink eswitch instance serves the devlink ports of both
controllers together, PCI PF/VF numbers may overlap.
Due to this a unique phys_port_name cannot be constructed.
For example in below such system controller-0 and controller-1, each has
PCI PF pf0 whose eswitch ports can be present in controller-0.
These results in phys_port_name as "pf0" for both.
Similar problem exists for VFs and upcoming Sub functions.
An example view of two controller systems:
---------------------------------------------------------
| |
| --------- --------- ------- ------- |
----------- | | vf(s) | | sf(s) | |vf(s)| |sf(s)| |
| server | | ------- ----/---- ---/----- ------- ---/--- ---/--- |
| pci rc |=== | pf0 |______/________/ | pf1 |___/_______/ |
| connect | | ------- ------- |
----------- | | controller_num=1 (no eswitch) |
------|--------------------------------------------------
(internal wire)
|
---------------------------------------------------------
| devlink eswitch ports and reps |
| ----------------------------------------------------- |
| |ctrl-0 | ctrl-0 | ctrl-0 | ctrl-0 | ctrl-0 |ctrl-0 | |
| |pf0 | pf0vfN | pf0sfN | pf1 | pf1vfN |pf1sfN | |
| ----------------------------------------------------- |
| |ctrl-1 | ctrl-1 | ctrl-1 | ctrl-1 | ctrl-1 |ctrl-1 | |
| |pf1 | pf1vfN | pf1sfN | pf1 | pf1vfN |pf0sfN | |
| ----------------------------------------------------- |
| |
| |
| --------- --------- ------- ------- |
| | vf(s) | | sf(s) | |vf(s)| |sf(s)| |
| ------- ----/---- ---/----- ------- ---/--- ---/--- |
| | pf0 |______/________/ | pf1 |___/_______/ |
| ------- ------- |
| |
| local controller_num=0 (eswitch) |
---------------------------------------------------------
An example devlink port for external controller with controller
number = 1 for a VF 1 of PF 0:
$ devlink port show pci/0000:06:00.0/2
pci/0000:06:00.0/2: type eth netdev ens2f0pf0vf1 flavour pcivf controller 1 pfnum 0 vfnum 1 external true splittable false
function:
hw_addr 00:00:00:00:00:00
$ devlink port show pci/0000:06:00.0/2 -jp
{
"port": {
"pci/0000:06:00.0/2": {
"type": "eth",
"netdev": "ens2f0pf0vf1",
"flavour": "pcivf",
"controller": 1,
"pfnum": 0,
"vfnum": 1,
"external": true,
"splittable": false,
"function": {
"hw_addr": "00:00:00:00:00:00"
}
}
}
}
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A devlink eswitch port may represent PCI PF/VF ports of a controller.
A controller either located on same system or it can be an external
controller located in host where such NIC is plugged in.
Add the ability for driver to specify if a port is for external
controller.
Use such flag in the mlx5_core driver.
An example of an external controller having VF1 of PF0 belong to
controller 1.
$ devlink port show pci/0000:06:00.0/2
pci/0000:06:00.0/2: type eth netdev ens2f0pf0vf1 flavour pcivf pfnum 0 vfnum 1 external true splittable false
function:
hw_addr 00:00:00:00:00:00
$ devlink port show pci/0000:06:00.0/2 -jp
{
"port": {
"pci/0000:06:00.0/2": {
"type": "eth",
"netdev": "ens2f0pf0vf1",
"flavour": "pcivf",
"pfnum": 0,
"vfnum": 1,
"external": true,
"splittable": false,
"function": {
"hw_addr": "00:00:00:00:00:00"
}
}
}
}
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Rewrite inner header IPv6 in ICMPv6 messages in ip6t_NPT,
from Michael Zhou.
2) do_ip_vs_set_ctl() dereferences uninitialized value,
from Peilin Ye.
3) Support for userdata in tables, from Jose M. Guisado.
4) Do not increment ct error and invalid stats at the same time,
from Florian Westphal.
5) Remove ct ignore stats, also from Florian.
6) Add ct stats for clash resolution, from Florian Westphal.
7) Bump reference counter bump on ct clash resolution only,
this is safe because bucket lock is held, again from Florian.
8) Use ip_is_fragment() in xt_HMARK, from YueHaibing.
9) Add wildcard support for nft_socket, from Balazs Scheidler.
10) Remove superfluous IPVS dependency on iptables, from
Yaroslav Bolyukin.
11) Remove unused definition in ebt_stp, from Wang Hai.
12) Replace CONFIG_NFT_CHAIN_NAT_{IPV4,IPV6} by CONFIG_NFT_NAT
in selftests/net, from Fabian Frederick.
13) Add userdata support for nft_object, from Jose M. Guisado.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
clean follow coccicheck warning:
net//hsr/hsr_netlink.c:94:8-42: WARNING avoid newline at end of message
in NL_SET_ERR_MSG_MOD
net//hsr/hsr_netlink.c:87:30-57: WARNING avoid newline at end of message
in NL_SET_ERR_MSG_MOD
net//hsr/hsr_netlink.c:79:29-53: WARNING avoid newline at end of message
in NL_SET_ERR_MSG_MOD
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Highlights include:
Bugfixes:
- Fix an NFS/RDMA resource leak
- Fix the error handling during delegation recall
- NFSv4.0 needs to return the delegation on a zero-stateid SETATTR
- Stop printk reading past end of string
-----BEGIN PGP SIGNATURE-----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=3fw2
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-5.9-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
- Fix an NFS/RDMA resource leak
- Fix the error handling during delegation recall
- NFSv4.0 needs to return the delegation on a zero-stateid SETATTR
- Stop printk reading past end of string
* tag 'nfs-for-5.9-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
SUNRPC: stop printk reading past end of string
NFS: Zero-stateid SETATTR should first return delegation
NFSv4.1 handle ERR_DELAY error reclaiming locking state on delegation recall
xprtrdma: Release in-flight MRs on disconnect
Currently, ipv6 stack does not do any TOS reflection. To make the
behavior consistent with v4 stack, this commit adds TOS reflection in
tcp_v6_reqsk_send_ack() and tcp_v6_send_reset(). We clear the lower
2-bit ECN value of the received TOS in compliance with RFC 3168 6.1.5
robustness principles.
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, in tcp_v4_reqsk_send_ack() and tcp_v4_send_reset(), we
echo the TOS value of the received packets in the response.
However, we do not want to echo the lower 2 ECN bits in accordance
with RFC 3168 6.1.5 robustness principles.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEqG5UsNXhtOCrfGQP+7dXa6fLC2sFAl9X6OcACgkQ+7dXa6fL
C2s3Dg/9FyGc4Na08Rc5q8K2TSVhsx1dqBscf/t3gIulCaShbbRRFAb4UecrxOTn
GV/eekGVejh/a+cCCVjMGFNP2FxyW9WTFoxINaTFp+bdGURdo8MOJTCTc/1Sgflb
M7s+2mubYHfHLw4/VUR8tCAhODPC0JUTiDnkZqXZxA8SizUPAkNZySH7OfgW9PjA
PFy/lB5IbR9mU64FWMALU2Rs09Gav/KRA+/X8fyE80i1MgYAz82U7x/EQa0XCmdR
B61VObK8z9/o7Juu8GzM01k8b5zoWraHph0e/BdFaEN1KY5phPdPyerGa67GcgwX
imnvcW4N75QBlHhE8C34eKnbIaNIPUR9ZNJdEgnA29CPOtP87rSPaeNNn4ISyF8r
TnGGpAeBHMahrY2dhKK0lIv9Gbwd1j+OAlrL9O+j4KTaKZc9CqnXLzKp3ugXDeex
RzHptlsc0I0bQ8ZeCA1jS9OFmypaRtYabE9DSrPS2Epbb8SdcCE4ZTXabB3A/ytk
HBle/MfGcQN9yFAJpDJ/0Bj6PmUZgohVS7qMrZi+JV99vkNPebxxxEvoiM5il2km
3DXPrD3rv9/qg8F6xVHYkWXVxZk6FCMe8/sg9VKUfOhmwEiFBkXv2IwTP/s3nN0g
0h46rXAzjWXY8YMZzsgBHVe/Vp2MfJGsx9hyO1JppRbxGb1PVeU=
=f+/X
-----END PGP SIGNATURE-----
Merge tag 'rxrpc-next-20200908' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc: Allow more calls to same peer
Here are some development patches for AF_RXRPC that allow more simultaneous
calls to be made to the same peer with the same security parameters. The
current code allows a maximum of 4 simultaneous calls, which limits the afs
filesystem to that many simultaneous threads. This increases the limit to
16.
To make this work, the way client connections are limited has to be changed
(incoming call/connection limits are unaffected) as the current code
depends on queuing calls on a connection and then pushing the connection
through a queue. The limit is on the number of available connections.
This is changed such that there's a limit[*] on the total number of calls
systemwide across all namespaces, but the limit on the number of client
connections is removed.
Once a call is allowed to proceed, it finds a bundle of connections and
tries to grab a call slot. If there's a spare call slot, fine, otherwise
it will wait. If there's already a waiter, it will try to create another
connection in the bundle, unless the limit of 4 is reached (4 calls per
connection, giving 16).
A number of things throttle someone trying to set up endless connections:
- Calls that fail immediately have their conns deleted immediately,
- Calls that don't fail immediately have to wait for a timeout,
- Connections normally get automatically reaped if they haven't been used
for 2m, but this is sped up to 2s if the number of connections rises
over 900. This number is tunable by sysctl.
[*] Technically two limits - kernel sockets and userspace rxrpc sockets are
accounted separately.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefan Schmidt says:
====================
pull-request: ieee802154 for net 2020-09-08
An update from ieee802154 for your *net* tree.
A potential memory leak fix for ca8210 from Liu Jian,
a check on the return for a register read in adf7242
and finally a user after free fix in the softmac tx
function from Eric found by syzkaller.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen reported the following warning:
net/bridge/br_multicast.c: In function 'br_multicast_find_port':
net/bridge/br_multicast.c:1818:21: warning: unused variable 'br' [-Wunused-variable]
1818 | struct net_bridge *br = mp->br;
| ^~
It happens due to bridge's mlock_dereference() when lockdep isn't defined.
Silence the warning by annotating the variable as __maybe_unused.
Fixes: 0436862e41 ("net: bridge: mcast: support for IGMPv3/MLDv2 ALLOW_NEW_SOURCES report")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If CONFIG_IPV6=m, the IPV6 functions won't be found by the linker:
ld: net/core/fib_rules.o: in function `fib_rules_lookup':
fib_rules.c:(.text+0x606): undefined reference to `fib6_rule_match'
ld: fib_rules.c:(.text+0x611): undefined reference to `fib6_rule_match'
ld: fib_rules.c:(.text+0x68c): undefined reference to `fib6_rule_action'
ld: fib_rules.c:(.text+0x693): undefined reference to `fib6_rule_action'
ld: fib_rules.c:(.text+0x6aa): undefined reference to `fib6_rule_suppress'
ld: fib_rules.c:(.text+0x6bc): undefined reference to `fib6_rule_suppress'
make: *** [Makefile:1166: vmlinux] Error 1
Reported-by: Sven Joachim <svenjoac@gmx.de>
Fixes: b9aaec8f0b ("fib: use indirect call wrappers in the most common fib_rules_ops")
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
===================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Allow conntrack entries with l3num == NFPROTO_IPV4 or == NFPROTO_IPV6
only via ctnetlink, from Will McVicker.
2) Batch notifications to userspace to improve netlink socket receive
utilization.
3) Restore mark based dump filtering via ctnetlink, from Martin Willi.
4) nf_conncount_init() fails with -EPROTO with CONFIG_IPV6, from
Eelco Chaudron.
5) Containers fail to match on meta skuid and skgid, use socket user_ns
to retrieve meta skuid and skgid.
===================
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes the following W=1 kernel build warning(s):
net/netlabel/netlabel_calipso.c:438: warning: Excess function parameter 'audit_secid' description in 'calipso_doi_remove'
net/netlabel/netlabel_calipso.c:605: warning: Excess function parameter 'reg' description in 'calipso_req_delattr'
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes the following W=1 kernel build warning(s):
net/ipv4/cipso_ipv4.c:510: warning: Excess function parameter 'audit_secid' description in 'cipso_v4_doi_remove'
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit 845e0ebb44 ("net: change addr_list_lock back to static
key"), cascaded DSA setups (DSA switch port as DSA master for another
DSA switch port) are emitting this lockdep warning:
============================================
WARNING: possible recursive locking detected
5.8.0-rc1-00133-g923e4b5032dd-dirty #208 Not tainted
--------------------------------------------
dhcpcd/323 is trying to acquire lock:
ffff000066dd4268 (&dsa_master_addr_list_lock_key/1){+...}-{2:2}, at: dev_mc_sync+0x44/0x90
but task is already holding lock:
ffff00006608c268 (&dsa_master_addr_list_lock_key/1){+...}-{2:2}, at: dev_mc_sync+0x44/0x90
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&dsa_master_addr_list_lock_key/1);
lock(&dsa_master_addr_list_lock_key/1);
*** DEADLOCK ***
May be due to missing lock nesting notation
3 locks held by dhcpcd/323:
#0: ffffdbd1381dda18 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x24/0x30
#1: ffff00006614b268 (_xmit_ETHER){+...}-{2:2}, at: dev_set_rx_mode+0x28/0x48
#2: ffff00006608c268 (&dsa_master_addr_list_lock_key/1){+...}-{2:2}, at: dev_mc_sync+0x44/0x90
stack backtrace:
Call trace:
dump_backtrace+0x0/0x1e0
show_stack+0x20/0x30
dump_stack+0xec/0x158
__lock_acquire+0xca0/0x2398
lock_acquire+0xe8/0x440
_raw_spin_lock_nested+0x64/0x90
dev_mc_sync+0x44/0x90
dsa_slave_set_rx_mode+0x34/0x50
__dev_set_rx_mode+0x60/0xa0
dev_mc_sync+0x84/0x90
dsa_slave_set_rx_mode+0x34/0x50
__dev_set_rx_mode+0x60/0xa0
dev_set_rx_mode+0x30/0x48
__dev_open+0x10c/0x180
__dev_change_flags+0x170/0x1c8
dev_change_flags+0x2c/0x70
devinet_ioctl+0x774/0x878
inet_ioctl+0x348/0x3b0
sock_do_ioctl+0x50/0x310
sock_ioctl+0x1f8/0x580
ksys_ioctl+0xb0/0xf0
__arm64_sys_ioctl+0x28/0x38
el0_svc_common.constprop.0+0x7c/0x180
do_el0_svc+0x2c/0x98
el0_sync_handler+0x9c/0x1b8
el0_sync+0x158/0x180
Since DSA never made use of the netdev API for describing links between
upper devices and lower devices, the dev->lower_level value of a DSA
switch interface would be 1, which would warn when it is a DSA master.
We can use netdev_upper_dev_link() to describe the relationship between
a DSA slave and a DSA master. To be precise, a DSA "slave" (switch port)
is an "upper" to a DSA "master" (host port). The relationship is "many
uppers to one lower", like in the case of VLAN. So, for that reason, we
use the same function as VLAN uses.
There might be a chance that somebody will try to take hold of this
interface and use it immediately after register_netdev() and before
netdev_upper_dev_link(). To avoid that, we do the registration and
linkage while holding the RTNL, and we use the RTNL-locked cousin of
register_netdev(), which is register_netdevice().
Since this warning was not there when lockdep was using dynamic keys for
addr_list_lock, we are blaming the lockdep patch itself. The network
stack _has_ been using static lockdep keys before, and it _is_ likely
that stacked DSA setups have been triggering these lockdep warnings
since forever, however I can't test very old kernels on this particular
stacked DSA setup, to ensure I'm not in fact introducing regressions.
Fixes: 845e0ebb44 ("net: change addr_list_lock back to static key")
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reviewing the error handling in tcf_action_init_1()
most of the early handling uses
err_out:
if (cookie) {
kfree(cookie->data);
kfree(cookie);
}
before cookie could ever be set.
So skip the unnecessay check.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow the number of parallel connections to a machine to be expanded from a
single connection to a maximum of four. This allows up to 16 calls to be
in progress at the same time to any particular peer instead of 4.
Signed-off-by: David Howells <dhowells@redhat.com>
Rewrite the rxrpc client connection manager so that it can support multiple
connections for a given security key to a peer. The following changes are
made:
(1) For each open socket, the code currently maintains an rbtree with the
connections placed into it, keyed by communications parameters. This
is tricky to maintain as connections can be culled from the tree or
replaced within it. Connections can require replacement for a number
of reasons, e.g. their IDs span too great a range for the IDR data
type to represent efficiently, the call ID numbers on that conn would
overflow or the conn got aborted.
This is changed so that there's now a connection bundle object placed
in the tree, keyed on the same parameters. The bundle, however, does
not need to be replaced.
(2) An rxrpc_bundle object can now manage the available channels for a set
of parallel connections. The lock that manages this is moved there
from the rxrpc_connection struct (channel_lock).
(3) There'a a dummy bundle for all incoming connections to share so that
they have a channel_lock too. It might be better to give each
incoming connection its own bundle. This bundle is not needed to
manage which channels incoming calls are made on because that's the
solely at whim of the client.
(4) The restrictions on how many client connections are around are
removed. Instead, a previous patch limits the number of client calls
that can be allocated. Ordinarily, client connections are reaped
after 2 minutes on the idle queue, but when more than a certain number
of connections are in existence, the reaper starts reaping them after
2s of idleness instead to get the numbers back down.
It could also be made such that new call allocations are forced to
wait until the number of outstanding connections subsides.
Signed-off-by: David Howells <dhowells@redhat.com>
Impose a maximum on the number of client rxrpc calls that are allowed
simultaneously. This will be in lieu of a maximum number of client
connections as this is easier to administed as, unlike connections, calls
aren't reusable (to be changed in a subsequent patch)..
This doesn't affect the limits on service calls and connections.
Signed-off-by: David Howells <dhowells@redhat.com>
Bryce reported that he saw the following with:
0: r6 = r1
1: r1 = 12
2: r0 = *(u16 *)skb[r1]
The xlated sequence was incorrectly clobbering r2 with pointer
value of r6 ...
0: (bf) r6 = r1
1: (b7) r1 = 12
2: (bf) r1 = r6
3: (bf) r2 = r1
4: (85) call bpf_skb_load_helper_16_no_cache#7692160
... and hence call to the load helper never succeeded given the
offset was too high. Fix it by reordering the load of r6 to r1.
Other than that the insn has similar calling convention than BPF
helpers, that is, r0 - r5 are scratch regs, so nothing else
affected after the insn.
Fixes: e0cea7ce98 ("bpf: implement ld_abs/ld_ind in native bpf")
Reported-by: Bryce Kahle <bryce.kahle@datadoghq.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/cace836e4d07bb63b1a53e49c5dfb238a040c298.1599512096.git.daniel@iogearbox.net
Enables storing userdata for nft_object. Initially this will store an
optional comment but can be extended in the future as needed.
Adds new attribute NFTA_OBJ_USERDATA to nft_object.
Signed-off-by: Jose M. Guisado Gomez <guigom@riseup.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
... instead of using init_user_ns.
Fixes: 96518518cc ("netfilter: add nftables")
Tested-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The openvswitch module fails initialization when used in a kernel
without IPv6 enabled. nf_conncount_init() fails because the ct code
unconditionally tries to initialize the netns IPv6 related bit,
regardless of the build option. The change below ignores the IPv6
part if not enabled.
Note that the corresponding _put() function already has this IPv6
configuration check.
Fixes: 11efd5cb04 ("openvswitch: Support conntrack zone limit")
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
conntrack mark based dump filtering may falsely skip entries if a mask
is given: If the mask-based check does not filter out the entry, the
else-if check is always true and compares the mark without considering
the mask. The if/else-if logic seems wrong.
Given that the mask during filter setup is implicitly set to 0xffffffff
if not specified explicitly, the mark filtering flags seem to just
complicate things. Restore the previously used approach by always
matching against a zero mask is no filter mark is given.
Fixes: cb8aa9a3af ("netfilter: ctnetlink: add kernel side filtering for dump")
Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
On x86_64, each notification results in one skbuff allocation which
consumes at least 768 bytes due to the skbuff overhead.
This patch coalesces several notifications into one single skbuff, so
each notification consumes at least ~211 bytes, that ~3.5 times less
memory consumption. As a result, this is reducing the chances to exhaust
the netlink socket receive buffer.
Rule of thumb is that each notification batch only contains netlink
messages whose report flag is the same, nfnetlink_send() requires this
to do appropriate delivery to userspace, either via unicast (echo
mode) or multicast (monitor mode).
The skbuff control buffer is used to annotate the report flag for later
handling at the new coalescing routine.
The batch skbuff notification size is NLMSG_GOODSIZE, using a larger
skbuff would allow for more socket receiver buffer savings (to amortize
the cost of the skbuff even more), however, going over that size might
break userspace applications, so let's be conservative and stick to
NLMSG_GOODSIZE.
Reported-by: Phil Sutter <phil@nwl.cc>
Acked-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
BPDU_TYPE_TCN is never used after it was introduced.
So better to remove it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The indexes to the nf_nat_l[34]protos arrays come from userspace. So
check the tuple's family, e.g. l3num, when creating the conntrack in
order to prevent an OOB memory access during setup. Here is an example
kernel panic on 4.14.180 when userspace passes in an index greater than
NFPROTO_NUMPROTO.
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:...
Process poc (pid: 5614, stack limit = 0x00000000a3933121)
CPU: 4 PID: 5614 Comm: poc Tainted: G S W O 4.14.180-g051355490483
Hardware name: Qualcomm Technologies, Inc. SM8150 V2 PM8150 Google Inc. MSM
task: 000000002a3dfffe task.stack: 00000000a3933121
pc : __cfi_check_fail+0x1c/0x24
lr : __cfi_check_fail+0x1c/0x24
...
Call trace:
__cfi_check_fail+0x1c/0x24
name_to_dev_t+0x0/0x468
nfnetlink_parse_nat_setup+0x234/0x258
ctnetlink_parse_nat_setup+0x4c/0x228
ctnetlink_new_conntrack+0x590/0xc40
nfnetlink_rcv_msg+0x31c/0x4d4
netlink_rcv_skb+0x100/0x184
nfnetlink_rcv+0xf4/0x180
netlink_unicast+0x360/0x770
netlink_sendmsg+0x5a0/0x6a4
___sys_sendmsg+0x314/0x46c
SyS_sendmsg+0xb4/0x108
el0_svc_naked+0x34/0x38
This crash is not happening since 5.4+, however, ctnetlink still
allows for creating entries with unsupported layer 3 protocol number.
Fixes: c1d10adb4a ("[NETFILTER]: Add ctnetlink port for nf_conntrack")
Signed-off-by: Will McVicker <willmcvicker@google.com>
[pablo@netfilter.org: rebased original patch on top of nf.git]
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Commit 72579e14a1 ("net: dsa: don't fail to probe if we couldn't set
the MTU") changed, for some reason, the "err && err != -EOPNOTSUPP"
check into a simple "err". This causes the MTU warning to be printed
even for drivers that don't have the MTU operations implemented.
Fix that.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
slave_dev->name is only populated at this stage if it was specified
through a label in the device tree. However that is not mandatory.
When it isn't, the error message looks like this:
[ 5.037057] fsl_enetc 0000:00:00.2 eth2: error -19 setting up slave PHY for eth%d
[ 5.044672] fsl_enetc 0000:00:00.2 eth2: error -19 setting up slave PHY for eth%d
[ 5.052275] fsl_enetc 0000:00:00.2 eth2: error -19 setting up slave PHY for eth%d
[ 5.059877] fsl_enetc 0000:00:00.2 eth2: error -19 setting up slave PHY for eth%d
which is especially confusing since the error gets printed on behalf of
the DSA master (fsl_enetc in this case).
Printing an error message that contains a valid reference to the DSA
port's name is difficult at this point in the initialization stage, so
at least we should print some info that is more reliable, even if less
user-friendly. That may be the driver name and the hardware port index.
After this change, the error is printed as:
[ 6.051587] mscc_felix 0000:00:00.5: error -19 setting up PHY for tree 0, switch 0, port 0
[ 6.061192] mscc_felix 0000:00:00.5: error -19 setting up PHY for tree 0, switch 0, port 1
[ 6.070765] mscc_felix 0000:00:00.5: error -19 setting up PHY for tree 0, switch 0, port 2
[ 6.080324] mscc_felix 0000:00:00.5: error -19 setting up PHY for tree 0, switch 0, port 3
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rxrpc_min_rtt_wlen is never used after it was introduced.
So better to remove it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since each entry type has timers that can be running simultaneously we need
to make sure that entries are not freed before their timers have finished.
In order to do that generalize the src gc work to mcast gc work and use a
callback to free the entries (mdb, port group or src).
v3: add IPv6 support
v2: force mcast gc on port del to make sure all port group timers have
finished before freeing the bridge port
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When an IGMPv3/MLDv2 query is received and we're operating in such mode
then we need to avoid updating group timers if the suppress flag is set.
Also we should update only timers for groups in exclude mode.
v3: add IPv6/MLDv2 support
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We already have all necessary helpers, so process IGMPV3/MLDv2
BLOCK_OLD_SOURCES as per the RFCs.
v3: add IPv6/MLDv2 support
v2: directly do flag bit operations
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to process IGMPV3/MLDv2 CHANGE_TO_INCLUDE/EXCLUDE report types we
need new helpers which allow us to mark entries based on their timer
state and to query only marked entries.
v3: add IPv6/MLDv2 support, fix other_query checks
v2: directly do flag bit operations
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to process IGMPV3/MLDv2_MODE_IS_INCLUDE/EXCLUDE report types we
need some new helpers which allow us to set/clear flags for all current
entries and later delete marked entries after the report sources have been
processed.
v3: add IPv6/MLDv2 support
v2: drop flag helpers and directly do flag bit operations
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds handling for the ALLOW_NEW_SOURCES IGMPv3/MLDv2 report
types and limits them only when multicast_igmp_version == 3 or
multicast_mld_version == 2 respectively. Now that IGMPv3/MLDv2 handling
functions will be managing timers we need to delay their activation, thus
a new argument is added which controls if the timer should be updated.
We also disable host IGMPv3/MLDv2 handling as it's not yet implemented and
could cause inconsistent group state, the host can only join a group as
EXCLUDE {} or leave it.
v4: rename update_timer to igmpv2_mldv1 and use the passed value from
br_multicast_add_group's callers
v3: Add IPv6/MLDv2 support
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If an expired port group is in EXCLUDE mode, then we have to turn it
into INCLUDE mode, remove all srcs with zero timer and finally remove
the group itself if there are no more srcs with an active timer.
For IGMPv2 use there would be no sources, so this will reduce to just
removing the group as before.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We have to use mdb and port entries when sending mdb notifications in
order to fill in all group attributes properly. Before this change we
would've used a fake br_mdb_entry struct to fill in only partial
information about the mdb. Now we can also reuse the mdb dump fill
function and thus have only a single central place which fills the mdb
attributes.
v3: add IPv6 support
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This change is in preparation for using the mdb port group entries when
sending a notification, so their full state and additional attributes can
be filled in.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We need to be able to retransmit group-specific and group-and-source
specific queries. The new timer takes care of those.
v3: add IPv6 support
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allows br_multicast_alloc_query to build queries with the port group's
source lists and sends a query for sources over and under lmqt when
necessary as per RFCs 3376 and 3810 with the suppress flag set
appropriately.
v3: add IPv6 support
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support per port group src list (address and timer) and filter mode
dumping. Protected by either multicast_lock or rcu.
v3: add IPv6 support
v2: require RCU or multicast_lock to traverse src groups
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Initial functions for group source lists which are needed for IGMPv3
and MLDv2 include/exclude lists. Both IPv4 and IPv6 sources are supported.
User-added mdb entries are created with exclude filter mode, we can
extend that later to allow user-supplied mode. When group src entries
are deleted, they're freed from a workqueue to make sure their timers
are not still running. Source entries are protected by the multicast_lock
and rcu. The number of src groups per port group is limited to 32.
v4: use the new port group del function directly
add igmpv2/mldv1 bool to denote if the entry was added in those
modes, it will later replace the old update_timer bool
v3: add IPv6 support
v2: allow src groups to be traversed under rcu
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to avoid future errors and reduce code duplication we should
factor out the port group del sequence. This allows us to have one
function which takes care of all details when removing a port group.
v4: set pg's fast leave flag when deleting due to fast leave
move the patch before adding source lists
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before this patch we'd need 2 cache lines for fast-path, now all used
fields are in the first cache line.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the commit fdeba99b1e
("tipc: fix use-after-free in tipc_bcast_get_mode"), we're trying
to make sure the tipc_net_finalize_work work item finished if it
enqueued. But calling flush_scheduled_work() is not just affecting
above work item but either any scheduled work. This has turned out
to be overkill and caused to deadlock as syzbot reported:
======================================================
WARNING: possible circular locking dependency detected
5.9.0-rc2-next-20200828-syzkaller #0 Not tainted
------------------------------------------------------
kworker/u4:6/349 is trying to acquire lock:
ffff8880aa063d38 ((wq_completion)events){+.+.}-{0:0}, at: flush_workqueue+0xe1/0x13e0 kernel/workqueue.c:2777
but task is already holding lock:
ffffffff8a879430 (pernet_ops_rwsem){++++}-{3:3}, at: cleanup_net+0x9b/0xb10 net/core/net_namespace.c:565
[...]
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(pernet_ops_rwsem);
lock(&sb->s_type->i_mutex_key#13);
lock(pernet_ops_rwsem);
lock((wq_completion)events);
*** DEADLOCK ***
[...]
v1:
To fix the original issue, we replace above calling by introducing
a bit flag. When a namespace cleaned-up, bit flag is set to zero and:
- tipc_net_finalize functionial just does return immediately.
- tipc_net_finalize_work does not enqueue into the scheduled work queue.
v2:
Use cancel_work_sync() helper to make sure ONLY the
tipc_net_finalize_work() stopped before releasing bcbase object.
Reported-by: syzbot+d5aa7e0385f6a5d0f4fd@syzkaller.appspotmail.com
Fixes: fdeba99b1e ("tipc: fix use-after-free in tipc_bcast_get_mode")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hoang Huu Le <hoang.h.le@dektech.com.au>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When we clone state only add_time was cloned. It missed values like
bytes, packets. Now clone the all members of the structure.
v1->v3:
- use memcpy to copy the entire structure
Fixes: 80c9abaabf ("[XFRM]: Extension for dynamic update of endpoint address(es)")
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
XFRMA_SEC_CTX was not cloned from the old to the new.
Migrate this attribute during XFRMA_MSG_MIGRATE
v1->v2:
- return -ENOMEM on error
v2->v3:
- fix return type to int
Fixes: 80c9abaabf ("[XFRM]: Extension for dynamic update of endpoint address(es)")
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
XFRMA_SET_MARK and XFRMA_SET_MARK_MASK was not cloned from the old
to the new. Migrate these two attributes during XFRMA_MSG_MIGRATE
Fixes: 9b42c1f179 ("xfrm: Extend the output_mark to support input direction and masking.")
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
BLOCK_PRIV is never used after it was introduced.
So better to remove it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
DIGITAL_NFC_DEP_REQ_RES_TAILROOM is never used after it was introduced.
DIGITAL_NFC_DEP_REQ_RES_HEADROOM is no more used after below
commit e8e7f42175 ("NFC: digital: Remove useless call to skb_reserve()")
Remove them.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove SRVL_CTRL_PKT_SIZE which is defined more than once.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since p points at raw xdr data, there's no guarantee that it's NULL
terminated, so we should give a length. And probably escape any special
characters too.
Reported-by: Zhi Li <yieli@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The unicast packet rerouting code makes several assumptions. For
instance it assumes that there is always exactly one destination in the
TT. This breaks for multicast frames in a unicast packets in several ways:
For one thing if there is actually no TT entry and the destination node
was selected due to the multicast tvlv flags it announced. Then an
intermediate node will wrongly drop the packet.
For another thing if there is a TT entry but the TTVN of this entry is
newer than the originally addressed destination node: Then the
intermediate node will wrongly redirect the packet, leading to
duplicated multicast packets at a multicast listener and missing
packets at other multicast listeners or multicast routers.
Fixing this by not applying the unicast packet rerouting to batman-adv
unicast packets with a multicast payload. We are not able to detect a
roaming multicast listener at the moment and will just continue to send
the multicast frame to both the new and old destination for a while in
case of such a roaming multicast listener.
Fixes: a73105b8d4 ("batman-adv: improved client announcement mechanism")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The following deadlock scenario is triggered by syzbot:
Thread A: Thread B:
tcf_idr_check_alloc()
...
populate_metalist()
rtnl_unlock()
rtnl_lock()
...
request_module() tcf_idr_check_alloc()
rtnl_lock()
At this point, thread A is waiting for thread B to release RTNL
lock, while thread B is waiting for thread A to commit the IDR
change with tcf_idr_insert() later.
Break this deadlock situation by preloading ife modules earlier,
before tcf_idr_check_alloc(), this is fine because we only need
to load modules we need potentially.
Reported-and-tested-by: syzbot+80e32b5d1f9923f8ace6@syzkaller.appspotmail.com
Fixes: 0190c1d452 ("net: sched: atomically check-allocate action")
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Vlad Buslov <vladbu@mellanox.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We got slightly different patches removing a double word
in a comment in net/ipv4/raw.c - picked the version from net.
Simple conflict in drivers/net/ethernet/ibm/ibmvnic.c. Use cached
values instead of VNIC login response buffer (following what
commit 507ebe6444 ("ibmvnic: Fix use-after-free of VNIC login
response buffer") did).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using tp_reserve to calculate netoff can overflow as
tp_reserve is unsigned int and netoff is unsigned short.
This may lead to macoff receving a smaller value then
sizeof(struct virtio_net_hdr), and if po->has_vnet_hdr
is set, an out-of-bounds write will occur when
calling virtio_net_hdr_from_skb.
The bug is fixed by converting netoff to unsigned int
and checking if it exceeds USHRT_MAX.
This addresses CVE-2020-14386
Fixes: 8913336a7e ("packet: add PACKET_RESERVE sockopt")
Signed-off-by: Or Cohen <orcohen@paloaltonetworks.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull networking fixes from David Miller:
1) Use netif_rx_ni() when necessary in batman-adv stack, from Jussi
Kivilinna.
2) Fix loss of RTT samples in rxrpc, from David Howells.
3) Memory leak in hns_nic_dev_probe(), from Dignhao Liu.
4) ravb module cannot be unloaded, fix from Yuusuke Ashizuka.
5) We disable BH for too lokng in sctp_get_port_local(), add a
cond_resched() here as well, from Xin Long.
6) Fix memory leak in st95hf_in_send_cmd, from Dinghao Liu.
7) Out of bound access in bpf_raw_tp_link_fill_link_info(), from
Yonghong Song.
8) Missing of_node_put() in mt7530 DSA driver, from Sumera
Priyadarsini.
9) Fix crash in bnxt_fw_reset_task(), from Michael Chan.
10) Fix geneve tunnel checksumming bug in hns3, from Yi Li.
11) Memory leak in rxkad_verify_response, from Dinghao Liu.
12) In tipc, don't use smp_processor_id() in preemptible context. From
Tuong Lien.
13) Fix signedness issue in mlx4 memory allocation, from Shung-Hsi Yu.
14) Missing clk_disable_prepare() in gemini driver, from Dan Carpenter.
15) Fix ABI mismatch between driver and firmware in nfp, from Louis
Peens.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (110 commits)
net/smc: fix sock refcounting in case of termination
net/smc: reset sndbuf_desc if freed
net/smc: set rx_off for SMCR explicitly
net/smc: fix toleration of fake add_link messages
tg3: Fix soft lockup when tg3_reset_task() fails.
doc: net: dsa: Fix typo in config code sample
net: dp83867: Fix WoL SecureOn password
nfp: flower: fix ABI mismatch between driver and firmware
tipc: fix shutdown() of connectionless socket
ipv6: Fix sysctl max for fib_multipath_hash_policy
drivers/net/wan/hdlc: Change the default of hard_header_len to 0
net: gemini: Fix another missing clk_disable_unprepare() in probe
net: bcmgenet: fix mask check in bcmgenet_validate_flow()
amd-xgbe: Add support for new port mode
net: usb: dm9601: Add USB ID of Keenetic Plus DSL
vhost: fix typo in error message
net: ethernet: mlx4: Fix memory allocation in mlx4_buddy_init()
pktgen: fix error message with wrong function name
net: ethernet: ti: am65-cpsw: fix rmii 100Mbit link mode
cxgb4: fix thermal zone device registration
...
When an ISM device is removed, all its linkgroups are terminated,
i.e. all the corresponding connections are killed.
Connection killing invokes smc_close_active_abort(), which decreases
the sock refcount for certain states to simulate passive closing.
And it cancels the close worker and has to give up the sock lock for
this timeframe. This opens the door for a passive close worker or a
socket close to run in between. In this case smc_close_active_abort() and
passive close worker resp. smc_release() might do a sock_put for passive
closing. This causes:
[ 1323.315943] refcount_t: underflow; use-after-free.
[ 1323.316055] WARNING: CPU: 3 PID: 54469 at lib/refcount.c:28 refcount_warn_saturate+0xe8/0x130
[ 1323.316069] Kernel panic - not syncing: panic_on_warn set ...
[ 1323.316084] CPU: 3 PID: 54469 Comm: uperf Not tainted 5.9.0-20200826.rc2.git0.46328853ed20.300.fc32.s390x+debug #1
[ 1323.316096] Hardware name: IBM 2964 NC9 702 (z/VM 6.4.0)
[ 1323.316108] Call Trace:
[ 1323.316125] [<00000000c0d4aae8>] show_stack+0x90/0xf8
[ 1323.316143] [<00000000c15989b0>] dump_stack+0xa8/0xe8
[ 1323.316158] [<00000000c0d8344e>] panic+0x11e/0x288
[ 1323.316173] [<00000000c0d83144>] __warn+0xac/0x158
[ 1323.316187] [<00000000c1597a7a>] report_bug+0xb2/0x130
[ 1323.316201] [<00000000c0d36424>] monitor_event_exception+0x44/0xc0
[ 1323.316219] [<00000000c195c716>] pgm_check_handler+0x1da/0x238
[ 1323.316234] [<00000000c151844c>] refcount_warn_saturate+0xec/0x130
[ 1323.316280] ([<00000000c1518448>] refcount_warn_saturate+0xe8/0x130)
[ 1323.316310] [<000003ff801f2e2a>] smc_release+0x192/0x1c8 [smc]
[ 1323.316323] [<00000000c169f1fa>] __sock_release+0x5a/0xe0
[ 1323.316334] [<00000000c169f2ac>] sock_close+0x2c/0x40
[ 1323.316350] [<00000000c1086de0>] __fput+0xb8/0x278
[ 1323.316362] [<00000000c0db1e0e>] task_work_run+0x76/0xb8
[ 1323.316393] [<00000000c0d8ab84>] do_exit+0x26c/0x520
[ 1323.316408] [<00000000c0d8af08>] do_group_exit+0x48/0xc0
[ 1323.316421] [<00000000c0d8afa8>] __s390x_sys_exit_group+0x28/0x38
[ 1323.316433] [<00000000c195c32c>] system_call+0xe0/0x2b4
[ 1323.316446] 1 lock held by uperf/54469:
[ 1323.316456] #0: 0000000044125e60 (&sb->s_type->i_mutex_key#9){+.+.}-{3:3}, at: __sock_release+0x44/0xe0
The patch rechecks sock state in smc_close_active_abort() after
smc_close_cancel_work() to avoid duplicate decrease of sock
refcount for the same purpose.
Fixes: 611b63a127 ("net/smc: cancel tx worker in case of socket aborts")
Reviewed-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SMC tries to make use of SMCD first. If a problem shows up,
it tries to switch to SMCR. If the SMCD initializing problem shows
up after the SMCD connection has already been initialized, field
rx_off keeps the wrong SMCD value for SMCR, which results in corrupted
data at the receiver.
This patch adds an explicit (re-)setting of field rx_off to zero if the
connection uses SMCR.
Fixes: be244f28d2 ("net/smc: add SMC-D support in data transfer")
Reviewed-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Older SMCR implementations had no link failover support and used one
link only. Because the handshake protocol requires to try the
establishment of a second link the old code sent a fake add_link message
and declined any server response afterwards.
The current code supports multiple links and inspects the received fake
add_link message more closely. To tolerate the fake add_link messages
smc_llc_is_local_add_link() needs an improved check of the message to
be able to separate between locally enqueued and fake add_link messages.
And smc_llc_cli_add_link() needs to check if the provided qp_mtu size is
invalid and reject the add_link request in that case.
Fixes: c48254fa48 ("net/smc: move add link processing for new device into llc layer")
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Expose all exisiting inet sockopt bits through inet_diag for debug purpose.
Corresponding changes in iproute2 ss will be submitted to output all
these values.
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If ops->set_phys_id() returned an error, previously we would only break
out of the inner loop, which neither stopped the outer loop nor returned
the error to the user (since 'rc' would be overwritten on the next pass
through the loop).
Thus, rewrite it to use a single loop, so that the break does the right
thing. Use u64 for 'count' and 'i' to prevent overflow in case of
(unreasonably) large values of id.data and n.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp_tunnel_closeall is called as a part of tunnel shutdown in order to
close all the sessions held by the tunnel. The code it uses to close a
session duplicates what l2tp_session_delete does.
Rather than duplicating the code, have l2tp_tunnel_closeall call
l2tp_session_delete instead.
This involves a very minor change to locking in l2tp_tunnel_closeall.
Previously, l2tp_tunnel_closeall checked the session "dead" flag while
holding tunnel->hlist_lock. This allowed for the code to step to the
next session in the list without releasing the lock if the current
session happened to be in the process of closing already.
By calling l2tp_session_delete instead, l2tp_tunnel_closeall must now
drop and regain the hlist lock for each session in the tunnel list.
Given that the likelihood of a session being in the process of closing
when the tunnel is closed, it seems worth this very minor potential
loss of efficiency to avoid duplication of the session delete code.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The l2tp tunnel and session structures contain a "magic feather" field
which was originally intended to help trace lifetime bugs in the code.
Since the introduction of the shared kernel refcount code in refcount.h,
and l2tp's porting to those APIs, we are covered by the refcount code's
checks and warnings. Duplicating those checks in the l2tp code isn't
useful.
However, magic feather checks are still useful to help to detect bugs
stemming from misuse/trampling of the sk_user_data pointer in struct
sock. The l2tp code makes extensive use of sk_user_data to stash
pointers to the tunnel and session structures, and if another subsystem
overwrites sk_user_data it's important to detect this.
As such, rework l2tp's magic feather checks to focus on validating the
tunnel and session data structures when they're extracted from
sk_user_data.
* Add a new accessor function l2tp_sk_to_tunnel which contains a magic
feather check, and is used by l2tp_core and l2tp_ip[6]
* Comment l2tp_udp_encap_recv which doesn't use this new accessor function
because of the specific nature of the codepath it is called in
* Drop l2tp_session_queue_purge's check on the session magic feather:
it is called from code which is walking the tunnel session list, and
hence doesn't need validation
* Drop l2tp_session_free's check on the tunnel magic feather: the
intention of this check is covered by refcount.h's reference count
sanity checking
* Add session magic validation in pppol2tp_ioctl. On failure return
-EBADF, which mirrors the approach in pppol2tp_[sg]etsockopt.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp_xmit_skb has a number of failure paths which are not reflected in
the tunnel and session statistics because the stats are updated by
l2tp_xmit_core. Hence any errors occurring before l2tp_xmit_core is
called are missed from the statistics.
Refactor the transmit path slightly to capture all error paths.
l2tp_xmit_skb now leaves all the actual work of transmission to
l2tp_xmit_core, and updates the statistics based on l2tp_xmit_core's
return code.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The data_len argument passed to l2tp_xmit_core is no longer used, so
remove it.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All callers pass the session structure's hdr_len field as the header
length parameter to l2tp_xmit_skb.
Since we're passing a pointer to the session structure to l2tp_xmit_skb
anyway, there's not much point breaking the header length out as a
separate argument.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
syzbot is reporting hung task at nbd_ioctl() [1], for there are two
problems regarding TIPC's connectionless socket's shutdown() operation.
----------
#include <fcntl.h>
#include <sys/socket.h>
#include <sys/ioctl.h>
#include <linux/nbd.h>
#include <unistd.h>
int main(int argc, char *argv[])
{
const int fd = open("/dev/nbd0", 3);
alarm(5);
ioctl(fd, NBD_SET_SOCK, socket(PF_TIPC, SOCK_DGRAM, 0));
ioctl(fd, NBD_DO_IT, 0); /* To be interrupted by SIGALRM. */
return 0;
}
----------
One problem is that wait_for_completion() from flush_workqueue() from
nbd_start_device_ioctl() from nbd_ioctl() cannot be completed when
nbd_start_device_ioctl() received a signal at wait_event_interruptible(),
for tipc_shutdown() from kernel_sock_shutdown(SHUT_RDWR) from
nbd_mark_nsock_dead() from sock_shutdown() from nbd_start_device_ioctl()
is failing to wake up a WQ thread sleeping at wait_woken() from
tipc_wait_for_rcvmsg() from sock_recvmsg() from sock_xmit() from
nbd_read_stat() from recv_work() scheduled by nbd_start_device() from
nbd_start_device_ioctl(). Fix this problem by always invoking
sk->sk_state_change() (like inet_shutdown() does) when tipc_shutdown() is
called.
The other problem is that tipc_wait_for_rcvmsg() cannot return when
tipc_shutdown() is called, for tipc_shutdown() sets sk->sk_shutdown to
SEND_SHUTDOWN (despite "how" is SHUT_RDWR) while tipc_wait_for_rcvmsg()
needs sk->sk_shutdown set to RCV_SHUTDOWN or SHUTDOWN_MASK. Fix this
problem by setting sk->sk_shutdown to SHUTDOWN_MASK (like inet_shutdown()
does) when the socket is connectionless.
[1] https://syzkaller.appspot.com/bug?id=3fe51d307c1f0a845485cf1798aa059d12bf18b2
Reported-by: syzbot <syzbot+e36f41d207137b5d12f7@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cited commit added the possible value of '2', but it cannot be set. Fix
it by adjusting the maximum value to '2'. This is consistent with the
corresponding IPv4 sysctl.
Before:
# sysctl -w net.ipv6.fib_multipath_hash_policy=2
sysctl: setting key "net.ipv6.fib_multipath_hash_policy": Invalid argument
net.ipv6.fib_multipath_hash_policy = 2
# sysctl net.ipv6.fib_multipath_hash_policy
net.ipv6.fib_multipath_hash_policy = 0
After:
# sysctl -w net.ipv6.fib_multipath_hash_policy=2
net.ipv6.fib_multipath_hash_policy = 2
# sysctl net.ipv6.fib_multipath_hash_policy
net.ipv6.fib_multipath_hash_policy = 2
Fixes: d8f74f0975 ("ipv6: Support multipath hashing on inner IP pkts")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix use-after-free when a shared umem bind fails. The code incorrectly
tried to free the allocated buffer pool both in the bind code and then
later also when the socket was released. Fix this by setting the
buffer pool pointer to NULL after the bind code has freed the pool, so
that the socket release code will not try to free the pool. This is
the same solution as the regular, non-shared umem code path has. This
was missing from the shared umem path.
Fixes: b5aea28dca ("xsk: Add shared umem support between queue ids")
Reported-by: syzbot+5334f62e4d22804e646a@syzkaller.appspotmail.com
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/1599032164-25684-1-git-send-email-magnus.karlsson@intel.com
Currently, dma_map is being checked, when the right object identifier
to be null-checked is dma_map->dma_pages, instead.
Fix this by null-checking dma_map->dma_pages.
Fixes: 921b68692a ("xsk: Enable sharing of dma mappings")
Addresses-Coverity-ID: 1496811 ("Logically dead code")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/20200902150750.GA7257@embeddedor
Fix possible segfault when entry is inserted into xskmap. This can
happen if the socket is in a state where the umem has been set up, the
Rx ring created but it has yet to be bound to a device. In this case
the pool has not yet been created and we cannot reference it for the
existence of the fill ring. Fix this by removing the whole
xsk_is_setup_for_bpf_map function. Once upon a time, it was used to
make sure that the Rx and fill rings where set up before the driver
could call xsk_rcv, since there are no tests for the existence of
these rings in the data path. But these days, we have a state variable
that we test instead. When it is XSK_BOUND, everything has been set up
correctly and the socket has been bound. So no reason to have the
xsk_is_setup_for_bpf_map function anymore.
Fixes: 7361f9c3d7 ("xsk: Move fill and completion rings to buffer pool")
Reported-by: syzbot+febe51d44243fbc564ee@syzkaller.appspotmail.com
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/1599037569-26690-1-git-send-email-magnus.karlsson@intel.com
Fix possible segfault in the xsk diagnostics code when dumping
information about the umem. This can happen when a umem has been
created, but the socket has not been bound yet. In this case, the xsk
buffer pool does not exist yet and we cannot dump the information
that was moved from the umem to the buffer pool. Fix this by testing
for the existence of the buffer pool and if not there, do not dump any
of that information.
Fixes: c2d3d6a474 ("xsk: Move queue_id, dev and need_wakeup to buffer pool")
Fixes: 7361f9c3d7 ("xsk: Move fill and completion rings to buffer pool")
Reported-by: syzbot+3f04d36b7336f7868066@syzkaller.appspotmail.com
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/1599036743-26454-1-git-send-email-magnus.karlsson@intel.com
If nf_conncount_init fails currently the dispatched work is not canceled,
causing problems when the timer fires. This change fixes this by not
scheduling the work until all initialization is successful.
Fixes: a65878d6f0 ("net: openvswitch: fixes potential deadlock in dp cleanup code")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-09-01
The following pull-request contains BPF updates for your *net-next* tree.
There are two small conflicts when pulling, resolve as follows:
1) Merge conflict in tools/lib/bpf/libbpf.c between 88a8212028 ("libbpf: Factor
out common ELF operations and improve logging") in bpf-next and 1e891e513e
("libbpf: Fix map index used in error message") in net-next. Resolve by taking
the hunk in bpf-next:
[...]
scn = elf_sec_by_idx(obj, obj->efile.btf_maps_shndx);
data = elf_sec_data(obj, scn);
if (!scn || !data) {
pr_warn("elf: failed to get %s map definitions for %s\n",
MAPS_ELF_SEC, obj->path);
return -EINVAL;
}
[...]
2) Merge conflict in drivers/net/ethernet/mellanox/mlx5/core/en/xsk/rx.c between
9647c57b11 ("xsk: i40e: ice: ixgbe: mlx5: Test for dma_need_sync earlier for
better performance") in bpf-next and e20f0dbf20 ("net/mlx5e: RX, Add a prefetch
command for small L1_CACHE_BYTES") in net-next. Resolve the two locations by retaining
net_prefetch() and taking xsk_buff_dma_sync_for_cpu() from bpf-next. Should look like:
[...]
xdp_set_data_meta_invalid(xdp);
xsk_buff_dma_sync_for_cpu(xdp, rq->xsk_pool);
net_prefetch(xdp->data);
[...]
We've added 133 non-merge commits during the last 14 day(s) which contain
a total of 246 files changed, 13832 insertions(+), 3105 deletions(-).
The main changes are:
1) Initial support for sleepable BPF programs along with bpf_copy_from_user() helper
for tracing to reliably access user memory, from Alexei Starovoitov.
2) Add BPF infra for writing and parsing TCP header options, from Martin KaFai Lau.
3) bpf_d_path() helper for returning full path for given 'struct path', from Jiri Olsa.
4) AF_XDP support for shared umems between devices and queues, from Magnus Karlsson.
5) Initial prep work for full BPF-to-BPF call support in libbpf, from Andrii Nakryiko.
6) Generalize bpf_sk_storage map & add local storage for inodes, from KP Singh.
7) Implement sockmap/hash updates from BPF context, from Lorenz Bauer.
8) BPF xor verification for scalar types & add BPF link iterator, from Yonghong Song.
9) Use target's prog type for BPF_PROG_TYPE_EXT prog verification, from Udip Pant.
10) Rework BPF tracing samples to use libbpf loader, from Daniel T. Lee.
11) Fix xdpsock sample to really cycle through all buffers, from Weqaar Janjua.
12) Improve type safety for tun/veth XDP frame handling, from Maciej Żenczykowski.
13) Various smaller cleanups and improvements all over the place.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement the getsockopt SOL_TLS TLS_RX which is currently missing. The
primary usecase is to use it in conjunction with TCP_REPAIR to
checkpoint/restore the TLS record layer state.
TLS connection state usually exists on the user space library. So
basically we can easily extract it from there, but when the TLS
connections are delegated to the kTLS, it is not the case. We need to
have a way to extract the TLS state from the kernel for both of TX and
RX side.
The new TLS_RX getsockopt copies the crypto_info to user in the same
way as TLS_TX does.
We have described use cases in our research work in Netdev 0x14
Transport Workshop [1].
Also, there is an TLS implementation called tlse [2] which supports
TLS connection migration. They have support of kTLS and their code
shows that they are expecting the future support of this option.
[1] https://speakerdeck.com/yutarohayakawa/prism-proxies-without-the-pain
[2] https://github.com/eduardsui/tlse
Signed-off-by: Yutaro Hayakawa <yhayakawa3720@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Error on calling kthread_create_on_node prints wrong function name,
kernel_thread.
Fixes: 94dcf29a11 ("kthread: use kthread_create_on_node()")
Signed-off-by: Leesoo Ahn <dev@ooseel.net>
Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
keep_flows was introduced by [1], which used as flag to delete flows or not.
When rehashing or expanding the table instance, we will not flush the flows.
Now don't use it anymore, remove it.
[1] - acd051f176
Cc: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Decrease table->count and ufid_count unconditionally,
because we only don't use count or ufid_count to count
when flushing the flows. To simplify the codes, we
remove the "count" argument of table_instance_flow_free.
To avoid a bug when deleting flows in the future, add
WARN_ON in flush flows function.
Cc: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Not change the logic, just improve the coding style.
Cc: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
While unregistering, make sure to clear the suspend tasks before
cancelling the work. If the unregister is called during resume from
suspend, this will unnecessarily add 2s to the resume time otherwise.
Fixes: 4e8c36c3b0 (Bluetooth: Fix suspend notifier race)
Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This dependency was added because ipv6_find_hdr was in iptables specific
code but is no longer required
Fixes: f8f626754e ("ipv6: Move ipv6_find_hdr() out of Netfilter code.")
Fixes: 63dca2c0b0 ("ipvs: Fix faulty IPv6 extension header handling in IPVS")
Signed-off-by: Yaroslav Bolyukin <iam@lach.pw>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The arg exact_dif is not used anymore, remove it. inet_exact_dif_match()
is no longer needed after the above is removed, so remove it too.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The arg exact_dif is not used anymore, remove it. inet6_exact_dif_match()
is no longer needed after the above is removed, remove it too.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a pure codestyle cleanup patch. No functional change intended.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
What 0xFFFF means here is actually the max mtu of a ip packet. Use help
macro IP_MAX_MTU here.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Using ipv6_stub->ipv6_fragment to avoid the netfilter dependency
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add ipv6_fragment to ipv6_stub to avoid calling netfilter when
access ip6_fragment.
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support to share a umem between different devices. This mode
can be invoked with the XDP_SHARED_UMEM bind flag. Previously,
sharing was only supported within the same device. Note that when
sharing a umem between devices, just as in the case of sharing a
umem between queue ids, you need to create a fill ring and a
completion ring and tie them to the socket (with two setsockopts,
one for each ring) before you do the bind with the
XDP_SHARED_UMEM flag. This so that the single-producer
single-consumer semantics of the rings can be upheld.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/1598603189-32145-13-git-send-email-magnus.karlsson@intel.com
Add support to share a umem between queue ids on the same
device. This mode can be invoked with the XDP_SHARED_UMEM bind
flag. Previously, sharing was only supported within the same
queue id and device, and you shared one set of fill and
completion rings. However, note that when sharing a umem between
queue ids, you need to create a fill ring and a completion ring
and tie them to the socket before you do the bind with the
XDP_SHARED_UMEM flag. This so that the single-producer
single-consumer semantics can be upheld.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/1598603189-32145-12-git-send-email-magnus.karlsson@intel.com
Enable the sharing of dma mappings by moving them out from the buffer
pool. Instead we put each dma mapped umem region in a list in the umem
structure. If dma has already been mapped for this umem and device, it
is not mapped again and the existing dma mappings are reused.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/1598603189-32145-9-git-send-email-magnus.karlsson@intel.com
Replicate the addrs pointer in the buffer pool to the umem. This mapping
will be the same for all buffer pools sharing the same umem. In the
buffer pool we leave the addrs pointer for performance reasons.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/1598603189-32145-8-git-send-email-magnus.karlsson@intel.com
Move the xsk_tx_list and the xsk_tx_list_lock from the umem to
the buffer pool. This so that we in a later commit can share the
umem between multiple HW queues. There is one xsk_tx_list per
device and queue id, so it should be located in the buffer pool.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/1598603189-32145-7-git-send-email-magnus.karlsson@intel.com
Move queue_id, dev, and need_wakeup from the umem to the
buffer pool. This so that we in a later commit can share the umem
between multiple HW queues. There is one buffer pool per dev and
queue id, so these variables should belong to the buffer pool, not
the umem. Need_wakeup is also something that is set on a per napi
level, so there is usually one per device and queue id. So move
this to the buffer pool too.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/1598603189-32145-6-git-send-email-magnus.karlsson@intel.com
Move the fill and completion rings from the umem to the buffer
pool. This so that we in a later commit can share the umem
between multiple HW queue ids. In this case, we need one fill and
completion ring per queue id. As the buffer pool is per queue id
and napi id this is a natural place for it and one umem
struture can be shared between these buffer pools.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/1598603189-32145-5-git-send-email-magnus.karlsson@intel.com
Create and free the buffer pool independently from the umem. Move
these operations that are performed on the buffer pool from the
umem create and destroy functions to new create and destroy
functions just for the buffer pool. This so that in later commits
we can instantiate multiple buffer pools per umem when sharing a
umem between HW queues and/or devices. We also erradicate the
back pointer from the umem to the buffer pool as this will not
work when we introduce the possibility to have multiple buffer
pools per umem.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/1598603189-32145-4-git-send-email-magnus.karlsson@intel.com
Rename the AF_XDP zero-copy driver interface functions to better
reflect what they do after the replacement of umems with buffer
pools in the previous commit. Mostly it is about replacing the
umem name from the function names with xsk_buff and also have
them take the a buffer pool pointer instead of a umem. The
various ring functions have also been renamed in the process so
that they have the same naming convention as the internal
functions in xsk_queue.h. This so that it will be clearer what
they do and also for consistency.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/1598603189-32145-3-git-send-email-magnus.karlsson@intel.com
Replace the explicit umem reference passed to the driver in AF_XDP
zero-copy mode with the buffer pool instead. This in preparation for
extending the functionality of the zero-copy mode so that umems can be
shared between queues on the same netdev and also between netdevs. In
this commit, only an umem reference has been added to the buffer pool
struct. But later commits will add other entities to it. These are
going to be entities that are different between different queue ids
and netdevs even though the umem is shared between them.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/1598603189-32145-2-git-send-email-magnus.karlsson@intel.com
In the policy export for binary attributes I erroneously used
a != NLA_VALIDATE_NONE comparison instead of checking for the
two possible values, which meant that if a validation function
pointer ended up aliasing the min/max as negatives, we'd hit
a warning in nla_get_range_unsigned().
Fix this to correctly check for only the two types that should
be handled here, i.e. range with or without warn-too-long.
Reported-by: syzbot+353df1490da781637624@syzkaller.appspotmail.com
Fixes: 8aa26c575f ("netlink: make NLA_BINARY validation more flexible")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Do not delete clash entries on reply, let them expire instead,
from Florian Westphal.
2) Do not report EAGAIN to nfnetlink, otherwise this enters a busy loop.
Update nfnetlink_unicast() to translate EAGAIN to ENOBUFS.
3) Remove repeated words in code comments, from Randy Dunlap.
4) Several patches for the flowtable selftests, from Fabian Frederick.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The 'this_cpu_ptr()' is used to obtain the AEAD key' TFM on the current
CPU for encryption, however the execution can be preemptible since it's
actually user-space context, so the 'using smp_processor_id() in
preemptible' has been observed.
We fix the issue by using the 'get/put_cpu_ptr()' API which consists of
a 'preempt_disable()' instead.
Fixes: fc1b6d6de2 ("tipc: introduce TIPC encryption & authentication")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add NFT_SOCKET_WILDCARD to match to wildcard socket listener.
Signed-off-by: Balazs Scheidler <bazsi77@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Its possible that we have more than one packet with the same ct tuple
simultaneously, e.g. when an application emits n packets on same UDP
socket from multiple threads.
NAT rules might be applied to those packets. With the right set of rules,
n packets will be mapped to m destinations, where at least two packets end
up with the same destination.
When this happens, the existing clash resolution may merge the skb that
is processed after the first has been received with the identical tuple
already in hash table.
However, its possible that this identical tuple is a NAT_CLASH tuple.
In that case the second skb will be sent, but no reply can be received
since the reply that is processed first removes the NAT_CLASH tuple.
Do not auto-delete, this gives a 1 second window for replies to be passed
back to originator.
Packets that are coming later (udp stream case) will not be affected:
they match the original ct entry, not a NAT_CLASH one.
Also prevent NAT_CLASH entries from getting offloaded.
Fixes: 6a757c07e5 ("netfilter: conntrack: allow insertion of clashing entries")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Frontend callback reports EAGAIN to nfnetlink to retry a command, this
is used to signal that module autoloading is required. Unfortunately,
nlmsg_unicast() reports EAGAIN in case the receiver socket buffer gets
full, so it enters a busy-loop.
This patch updates nfnetlink_unicast() to turn EAGAIN into ENOBUFS and
to use nlmsg_unicast(). Remove the flags field in nfnetlink_unicast()
since this is always MSG_DONTWAIT in the existing code which is exactly
what nlmsg_unicast() passes to netlink_unicast() as parameter.
Fixes: 96518518cc ("netfilter: add nftables")
Reported-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Drop duplicated words in net/netfilter/ and net/ipv4/netfilter/.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We can delay refcount increment until we reassign the existing entry to
the current skb.
A 0 refcount can't happen while the nf_conn object is still in the
hash table and parallel mutations are impossible because we hold the
bucket lock.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
There is a misconception about what "insert_failed" means.
We increment this even when a clash got resolved, so it might not indicate
a problem.
Add a dedicated counter for clash resolution and only increment
insert_failed if a clash cannot be resolved.
For the old /proc interface, export this in place of an older stat
that got removed a while back.
For ctnetlink, export this with a new attribute.
Also correct an outdated comment that implies we add a duplicate tuple --
we only add the (unique) reply direction.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This counter increments when nf_conntrack_in sees a packet that already
has a conntrack attached or when the packet is marked as UNTRACKED.
Neither is an error.
The former is normal for loopback traffic. The second happens for
certain ICMPv6 packets or when nftables/ip(6)tables rules are in place.
In case someone needs to count UNTRACKED packets, or packets
that are marked as untracked before conntrack_in this can be done with
both nftables and ip(6)tables rules.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The /proc interface for nf_conntrack displays the "error" counter as
"icmp_error".
It makes sense to not increment "invalid" when failing to handle an icmp
packet since those are special.
For example, its possible for conntrack to see partial and/or fragmented
packets inside icmp errors. This should be a separate event and not get
mixed with the "invalid" counter.
Likewise, remove the "error" increment for errors from get_l4proto().
After this, the error counter will only increment for errors coming from
icmp(v6) packet handling.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Enables storing userdata for nft_table. Field udata points to user data
and udlen store its length.
Adds new attribute flag NFTA_TABLE_USERDATA
Signed-off-by: Jose M. Guisado Gomez <guigom@riseup.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Detect and rewrite a prefix embedded in an ICMPv6 original packet that was
rewritten by a corresponding DNPT/SNPT rule so it will be recognised by
the host that sent the original packet.
Example
Rules in effect on the 1:2:3:4::/64 + 5:6:7:8::/64 side router:
* SNPT src-pfx 1:2:3:4::/64 dst-pfx 5:6:7:8::/64
* DNPT src-pfx 5:6:7:8::/64 dst-pfx 1:2:3:4::/64
No rules on the 9🅰️b:c::/64 side.
1. 1:2:3:4::1 sends UDP packet to 9🅰️b:c::1
2. Router applies SNPT changing src to 5:6:7:8::ffef::1
3. 9🅰️b:c::1 receives packet with (src 5:6:7:8::ffef::1 dst 9🅰️b:c::1)
and replies with ICMPv6 port unreachable to 5:6:7:8::ffef::1,
including original packet (src 5:6:7:8::ffef::1 dst 9🅰️b:c::1)
4. Router forwards ICMPv6 packet with (src 9🅰️b:c::1 dst 5:6:7:8::ffef::1)
including original packet (src 5:6:7:8::ffef::1 dst 9🅰️b:c::1)
and applies DNPT changing dst to 1:2:3:4::1
5. 1:2:3:4::1 receives ICMPv6 packet with (src 9🅰️b:c::1 dst 1:2:3:4::1)
including original packet (src 5:6:7:8::ffef::1 dst 9🅰️b:c::1).
It doesn't recognise the original packet as the src doesn't
match anything it originally sent
With this change, at step 4, DNPT will also rewrite the original packet
src to 1:2:3:4::1, so at step 5, 1:2:3:4::1 will recognise the ICMPv6
error and provide feedback to the application properly.
Conversely, SNPT will help when ICMPv6 errors are sent from the
translated network.
1. 9🅰️b:c::1 sends UDP packet to 5:6:7:8::ffef::1
2. Router applies DNPT changing dst to 1:2:3:4::1
3. 1:2:3:4::1 receives packet with (src 9🅰️b:c::1 dst 1:2:3:4::1)
and replies with ICMPv6 port unreachable to 9🅰️b:c::1
including original packet (src 9🅰️b:c::1 dst 1:2:3:4::1)
4. Router forwards ICMPv6 packet with (src 1:2:3:4::1 dst 9🅰️b:c::1)
including original packet (src 9🅰️b:c::1 dst 1:2:3:4::1)
and applies SNPT changing src to 5:6:7:8::ffef::1
5. 9🅰️b:c::1 receives ICMPv6 packet with
(src 5:6:7:8::ffef::1 dst 9🅰️b:c::1) including
original packet (src 9🅰️b:c::1 dst 1:2:3:4::1).
It doesn't recognise the original packet as the dst doesn't
match anything it already sent
The change to SNPT means the ICMPv6 original packet dst will be
rewritten to 5:6:7:8::ffef::1 in step 4, allowing the error to be
properly recognised in step 5.
Signed-off-by: Michael Zhou <mzhou@cse.unsw.edu.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Commit d3b990b7f3 ("netlabel: fix problems with mapping removal")
added a check to return an error if ret_val != 0, before ret_val is
later used in a log message. Now it will unconditionally print "...
res=1". So just drop the check.
Addresses-Coverity: ("Dead code")
Fixes: d3b990b7f3 ("netlabel: fix problems with mapping removal")
Signed-off-by: Alex Dewar <alex.dewar90@gmail.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When ->init() fails, ->destroy() is called to clean up.
So it is unnecessary to clean up in red_init(), and it
would cause some refcount underflow.
Fixes: aee9caa03f ("net: sched: sch_red: Add qevents "early_drop" and "mark"")
Reported-and-tested-by: syzbot+b33c1cb0a30ebdc8a5f9@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+e5ea5f8a3ecfd4427a1c@syzkaller.appspotmail.com
Cc: Petr Machata <petrm@mellanox.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The sysctl that was added earlier by commit 79134e6ce2 ("net: do
not create fallback tunnels for non-default namespaces") to create
fall-back only in root-ns. This patch enhances that behavior to provide
option not to create fallback tunnels in root-ns as well. Since modules
that create fallback tunnels could be built-in and setting the sysctl
value after booting is pointless, so added a kernel cmdline options to
change this default. The default setting is preseved for backward
compatibility. The kernel command line option of fb_tunnels=initns will
set the sysctl value to 1 and will create fallback tunnels only in initns
while kernel cmdline fb_tunnels=none will set the sysctl value to 2 and
fallback tunnels are skipped in every netns.
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Maciej Zenczykowski <maze@google.com>
Cc: Jian Yang <jianyang@google.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The data races were reported by KCSAN:
BUG: KCSAN: data-race in netlink_recvmsg / skb_queue_tail
write (marked) to 0xffff8c0986e5a8c8 of 8 bytes by interrupt on cpu 3:
skb_queue_tail+0xcc/0x120
__netlink_sendskb+0x55/0x80
netlink_broadcast_filtered+0x465/0x7e0
nlmsg_notify+0x8f/0x120
rtnl_notify+0x8e/0xb0
__neigh_notify+0xf2/0x120
neigh_update+0x927/0xde0
arp_process+0x8a3/0xf50
arp_rcv+0x27c/0x3b0
__netif_receive_skb_core+0x181c/0x1840
__netif_receive_skb+0x38/0xf0
netif_receive_skb_internal+0x77/0x1c0
napi_gro_receive+0x1bd/0x1f0
e1000_clean_rx_irq+0x538/0xb20 [e1000]
e1000_clean+0x5e4/0x1340 [e1000]
net_rx_action+0x310/0x9d0
__do_softirq+0xe8/0x308
irq_exit+0x109/0x110
do_IRQ+0x7f/0xe0
ret_from_intr+0x0/0x1d
0xffffffffffffffff
read to 0xffff8c0986e5a8c8 of 8 bytes by task 1463 on cpu 0:
netlink_recvmsg+0x40b/0x820
sock_recvmsg+0xc9/0xd0
___sys_recvmsg+0x1a4/0x3b0
__sys_recvmsg+0x86/0x120
__x64_sys_recvmsg+0x52/0x70
do_syscall_64+0xb5/0x360
entry_SYSCALL_64_after_hwframe+0x65/0xca
0xffffffffffffffff
Since the write is under sk_receive_queue->lock but the read
is done as lockless. so fix it by using skb_queue_empty_lockless()
instead of skb_queue_empty() for the read in netlink_rcv_wake()
Signed-off-by: zhudi <zhudi21@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
