Commit Graph

16 Commits

Author SHA1 Message Date
Lorenzo Bianconi
bc348defcc mt76: fix memory leak if device probing fails
Run mt76_free_device instead of ieee80211_free_hw if device probing
fails in order to remove the already allocated mt76 workqueue

Fixes: a86f1d01f5 ("mt76: move mt76 workqueue in common code")
Fixes: f1d962369d ("mt76: mt7915: implement HE per-rate tx power support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04 14:31:11 +01:00
Felix Fietkau
781eef5b34 mt76: convert from tx tasklet to tx worker thread
This improves performance by allowing the scheduler to move the tx scheduling
work to idle CPUs. Since tx scheduling work is very latency sensitive and
kept short via AQL, sched_set_fifo_low is used to keep worker priority above
normal tasks

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24 18:10:18 +02:00
Felix Fietkau
9df8c539be mt76: set interrupt mask register to 0 before requesting irq
Avoids spurious interrupts in case the hardware was running already

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24 18:10:13 +02:00
Lorenzo Bianconi
40ba9a938f mt76: mt76x2: fix pci suspend/resume on mt7612e
Fix the following mt7612e hw hangs during suspend/resume reported on
Dell Vostro 3360

mt76x2e 0000:01:00.0: MCU message 2 (seq 11) timed out
mt76x2e 0000:01:00.0: MCU message 30 (seq 12) timed out
mt76x2e 0000:01:00.0: MCU message 30 (seq 13) timed out
mt76x2e 0000:01:00.0: Firmware Version: 0.0.00
mt76x2e 0000:01:00.0: Build: 1
mt76x2e 0000:01:00.0: Build Time: 201507311614____
mt76x2e 0000:01:00.0: Firmware running!
ieee80211 phy0: Hardware restart was requested
mt76x2e 0000:01:00.0: MCU message 2 (seq 1) timed out
mt76x2e 0000:01:00.0: MCU message 30 (seq 2) timed out
mt76x2e 0000:01:00.0: MCU message 30 (seq 3) timed out
mt76x2e 0000:01:00.0: Firmware Version: 0.0.00
mt76x2e 0000:01:00.0: Build: 1
mt76x2e 0000:01:00.0: Build Time: 201507311614____
mt76x2e 0000:01:00.0: Firmware running!
ieee80211 phy0: Hardware restart was requested
mt76x2e 0000:01:00.0: MCU message 31 (seq 5) timed out
mt76x2e 0000:01:00.0: MCU message 31 (seq 6) timed out
mt76x2e 0000:01:00.0: MCU message 31 (seq 7) timed out
mt76x2e 0000:01:00.0: MCU message 31 (seq 8) timed out
mt76x2e 0000:01:00.0: MCU message 31 (seq 9) timed out
mt76x2e 0000:01:00.0: MCU message 31 (seq 10) timed out
mt76x2e 0000:01:00.0: MCU message 31 (seq 11) timed out
mt76x2e 0000:01:00.0: Firmware Version: 0.0.00
mt76x2e 0000:01:00.0: Build: 1
mt76x2e 0000:01:00.0: Build Time: 201507311614____
mt76x2e 0000:01:00.0: Firmware running!
ieee80211 phy0: Hardware restart was requested
------------[ cut here ]-----------
CPU: 3 PID: 11956 Comm: kworker/3:1 Not tainted 5.7.0-pf2 #1
Hardware name: Dell Inc.          Vostro 3360/0F5DWF, BIOS A18 09/25/2013
Workqueue: events_freezable ieee80211_restart_work [mac80211]
RIP: 0010:ieee80211_reconfig+0x234/0x1700 [mac80211]
RSP: 0018:ffffb803c23ffdf0 EFLAGS: 00010286
RAX: 00000000fffffff0 RBX: ffff9595a7564900 RCX: 0000000000000008
RDX: 0000000000000000 RSI: 0000000000000100 RDI: 0000000000000100
RBP: ffff9595a7ec07e0 R08: 0000000000000000 R09: 0000000000000001
R10: 0000000000000001 R11: 0000000000000000 R12: ffff9595a7ec18d0
R13: 00000000ffffffff R14: 0000000000000000 R15: 00000000fffffff0
FS:  0000000000000000(0000) GS:ffff9595af2c0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055e56d7de000 CR3: 000000042200a001 CR4: 00000000001706e0
Call Trace:
 ieee80211_restart_work+0xb7/0xe0 [mac80211]
 process_one_work+0x1d4/0x3c0
 worker_thread+0x228/0x470
 ? process_one_work+0x3c0/0x3c0
 kthread+0x19c/0x1c0
 ? __kthread_init_worker+0x30/0x30
 ret_from_fork+0x35/0x40
wlp1s0:  Failed check-sdata-in-driver check, flags: 0x0
CPU: 3 PID: 11956 Comm: kworker/3:1 Tainted: G        W         5.7.0-pf2 #1
Hardware name: Dell Inc.          Vostro 3360/0F5DWF, BIOS A18 09/25/2013
Workqueue: events_freezable ieee80211_restart_work [mac80211]
RIP: 0010:drv_remove_interface+0x11f/0x130 [mac80211]
RSP: 0018:ffffb803c23ffc80 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff9595a7564900 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 0000000000000082 RDI: 00000000ffffffff
RBP: ffff9595a7ec1930 R08: 00000000000004b6 R09: 0000000000000001
R10: 0000000000000001 R11: 0000000000006f08 R12: ffff9595a7ec1000
R13: ffff9595a75654b8 R14: ffff9595a7ec0ca0 R15: ffff9595a7ec07e0
FS:  0000000000000000(0000) GS:ffff9595af2c0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055e56d7de000 CR3: 000000042200a001 CR4: 00000000001706e0
Call Trace:
 ieee80211_do_stop+0x5af/0x8c0 [mac80211]
 ieee80211_stop+0x16/0x20 [mac80211]
 __dev_close_many+0xaa/0x120
 dev_close_many+0xa1/0x2b0
 dev_close+0x6d/0x90
 cfg80211_shutdown_all_interfaces+0x71/0xd0 [cfg80211]
 ieee80211_reconfig+0xa2/0x1700 [mac80211]
 ieee80211_restart_work+0xb7/0xe0 [mac80211]
 process_one_work+0x1d4/0x3c0
 worker_thread+0x228/0x470
 ? process_one_work+0x3c0/0x3c0
 kthread+0x19c/0x1c0
 ? __kthread_init_worker+0x30/0x30
 ret_from_fork+0x35/0x40

Fixes: 7bc04215a6 ("mt76: add driver code for MT76x2e")
Tested-by: Oleksandr Natalenko <oleksandr@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21 19:01:16 +02:00
Lorenzo Bianconi
6ed942af4f mt76: mt76x2e: rename routines in pci.c
Rely on mt76x2e prefix in mt76x2/pci.c and align to the rest of
mt76 code

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21 19:01:15 +02:00
Felix Fietkau
355f8d00c5 mt76: mt76x02: track approximate tx airtime for airtime fairness and survey
Estimate by calculating duration for EWMA packet size + estimated A-MPDU
length on tx status events

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20 13:23:49 +01:00
Felix Fietkau
5ce09c1a79 mt76: track rx airtime for airtime fairness and survey
Report total rx airtime for valid stations as BSS rx time in survey

mt7615 is left out for now, it will be supported later by reading
hardware counters instead of calculating airtime in software

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20 13:23:49 +01:00
Felix Fietkau
9ec0b821b8 mt76: rename mt76_driver_ops txwi_flags to drv_flags and include tx aligned4
This reduces the struct size and is useful for adding more flags later

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20 13:23:49 +01:00
Lorenzo Bianconi
f37f055035 mt76: mt76x2e: disable pcie_aspm by default
On same device (e.g. U7612E-H1) PCIE_ASPM causes continuous mcu hangs and
instability. Since mt76x2 series does not manage PCIE PS states, first we
try to disable ASPM using pci_disable_link_state. If it fails, we will
disable PCIE PS configuring PCI registers.
This patch has been successfully tested on U7612E-H1 mini-pice card

Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-30 16:59:46 +02:00
Ryder Lee
0e3d677750 mt76: switch to SPDX tag instead of verbose boilerplate text
No functional change intended.

Add SPDX identifiers to all remaining files in /mt76.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05 17:42:31 +02:00
Lorenzo Bianconi
def34a2f4f mt76: introduce mt76_free_device routine
Move mt76_tx_free in mt76_free_device routine in order to
unmap all txwi descriptors at module unload

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01 13:03:57 +02:00
Lorenzo Bianconi
66105538a6 mt76: mmio: move mt76_insert_hdr_pad in mt76_dma_tx_queue_skb
Introduce tx_aligned4_skbs in mt76_driver_ops and move
mt76_insert_hdr_pad in mt76_dma_tx_queue_skb. This is a preliminary
patch in order to unify tx dma mapping for mt76x02 and new chipsets

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01 13:03:55 +02:00
Lorenzo Bianconi
ecd25b547d mt76x2: remove mt76x2_alloc_device routine
Remove mt76x2_alloc_device since it just runs mt76_alloc_device.
Move mt76_alloc_device call in mt76x2_probe

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18 19:54:34 +01:00
Lorenzo Bianconi
9b43960b89 mt76: move irq handler in mt76x02-lib moudle
Move mt76x02_irq_handler handler in mt76x02_mmio.c in order to be
reused in mt76x0 driver. Move mt76x02_rx_poll_complete routine in
mt76x02-lib module. Moreover remove pci_core.c and mt76x2/trace.{c,h}
since are empty files

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-05 20:05:46 +02:00
Lorenzo Bianconi
e40803f2af mt76x2: move mt76x2_dev in mt76x02_util.h
Move mt76x2_dev in mt76x02_util.h and rename it in mt76x02_dev
in order to be shared between mt76x2 and mt76x0 driver

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-05 20:05:45 +02:00
Lorenzo Bianconi
1613c621e1 mt76x2: move mt76x2 source files to mt76x2 folder
Move mt76x2 and mt76x2u drivers to mt76x2 subfolder and
leave just shared code in mt76 root folder

Acked-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-05 20:05:44 +02:00