leandrof/linux
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
982,974 Commits 2 Branches 0 Tags
3816139c8a4fe5e1fb901b51e94b98822a6e4108
Commit Graph

63 Commits

Author SHA1 Message Date
Fabio Estevam
ea7110b87b mtd: rawnand: gpmi: Use a single line for of_device_id 
The .compatible and .data pairs can be stored in a single line, which
makes the code more concise.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20201208221243.3255-1-festevam@gmail.com
 2020-12-10 22:37:33 +01:00
Han Xu
7671edeb19 mtd: rawnand: gpmi: Fix the random DMA timeout issue 
To get better performance, current gpmi driver collected and chained all
small DMA transfers in gpmi_nfc_exec_op, the whole chain triggered and
wait for complete at the end.

But some random DMA timeout found in this new driver, with the help of
ftrace, we found the root cause is as follows:

Take gpmi_ecc_read_page() as an example, gpmi_nfc_exec_op collected 6
DMA transfers and the DMA chain triggered at the end. It waits for bch
completion and check jiffies if it's timeout. The typical function graph
shown below,

   63.216351 |   1)               |  gpmi_ecc_read_page() {
   63.216352 |   1)   0.750 us    |    gpmi_bch_layout_std();
   63.216354 |   1)               |    gpmi_nfc_exec_op() {
   63.216355 |   1)               |      gpmi_chain_command() {
   63.216356 |   1)               |        mxs_dma_prep_slave_sg() {
   63.216357 |   1)               |          /* mxs chan ccw idx: 0 */
   63.216358 |   1)   1.750 us    |        }
   63.216359 |   1)               |        mxs_dma_prep_slave_sg() {
   63.216360 |   1)               |          /* mxs chan ccw idx: 1 */
   63.216361 |   1)   2.000 us    |        }
   63.216361 |   1)   6.500 us    |      }
   63.216362 |   1)               |      gpmi_chain_command() {
   63.216363 |   1)               |        mxs_dma_prep_slave_sg() {
   63.216364 |   1)               |          /* mxs chan ccw idx: 2 */
   63.216365 |   1)   1.750 us    |        }
   63.216366 |   1)               |        mxs_dma_prep_slave_sg() {
   63.216367 |   1)               |          /* mxs chan ccw idx: 3 */
   63.216367 |   1)   1.750 us    |        }
   63.216368 |   1)   5.875 us    |      }
   63.216369 |   1)               |      /* gpmi_chain_wait_ready */
   63.216370 |   1)               |      mxs_dma_prep_slave_sg() {
   63.216372 |   1)               |        /* mxs chan ccw idx: 4 */
   63.216373 |   1)   3.000 us    |      }
   63.216374 |   1)               |      /* gpmi_chain_data_read */
   63.216376 |   1)               |      mxs_dma_prep_slave_sg() {
   63.216377 |   1)               |        /* mxs chan ccw idx: 5 */
   63.216378 |   1)   2.000 us    |      }
   63.216379 |   1)   1.125 us    |      mxs_dma_tx_submit();
   63.216381 |   1)   1.000 us    |      mxs_dma_enable_chan();
   63.216712 |   0)   2.625 us    |  mxs_dma_int_handler();
   63.216717 |   0)   4.250 us    |  bch_irq();
   63.216723 |   0)   1.250 us    |  mxs_dma_tasklet();
   63.216723 |   1)               |      /* jiffies left 250 */
   63.216725 |   1) ! 372.000 us  |    }
   63.216726 |   1)   2.625 us    |    gpmi_count_bitflips();
   63.216730 |   1) ! 379.125 us  |  }

but it's not gurantee that bch irq handled always after dma irq handled,
sometimes bch_irq comes first and gpmi_nfc_exec_op won't wait anymore,
another gpmi_nfc_exec_op may get invoked before last DMA chain IRQ
handled, this messed up the next DMA chain and causes DMA timeout. Check
the trace log when issue happened.

   63.218923 |   1)               |  gpmi_ecc_read_page() {
   63.218924 |   1)   0.625 us    |    gpmi_bch_layout_std();
   63.218926 |   1)               |    gpmi_nfc_exec_op() {
   63.218927 |   1)               |      gpmi_chain_command() {
   63.218928 |   1)               |        mxs_dma_prep_slave_sg() {
   63.218929 |   1)               |          /* mxs chan ccw idx: 0 */
   63.218929 |   1)   1.625 us    |        }
   63.218931 |   1)               |        mxs_dma_prep_slave_sg() {
   63.218931 |   1)               |          /* mxs chan ccw idx: 1 */
   63.218932 |   1)   1.750 us    |        }
   63.218933 |   1)   5.875 us    |      }
   63.218934 |   1)               |      gpmi_chain_command() {
   63.218934 |   1)               |        mxs_dma_prep_slave_sg() {
   63.218935 |   1)               |          /* mxs chan ccw idx: 2 */
   63.218936 |   1)   1.875 us    |        }
   63.218937 |   1)               |        mxs_dma_prep_slave_sg() {
   63.218938 |   1)               |          /* mxs chan ccw idx: 3 */
   63.218939 |   1)   1.625 us    |        }
   63.218939 |   1)   5.875 us    |      }
   63.218940 |   1)               |      /* gpmi_chain_wait_ready */
   63.218941 |   1)               |      mxs_dma_prep_slave_sg() {
   63.218942 |   1)               |        /* mxs chan ccw idx: 4 */
   63.218942 |   1)   1.625 us    |      }
   63.218943 |   1)               |      /* gpmi_chain_data_read */
   63.218944 |   1)               |      mxs_dma_prep_slave_sg() {
   63.218945 |   1)               |        /* mxs chan ccw idx: 5 */
   63.218947 |   1)   2.375 us    |      }
   63.218948 |   1)   0.625 us    |      mxs_dma_tx_submit();
   63.218949 |   1)   1.000 us    |      mxs_dma_enable_chan();
   63.219276 |   0)   5.125 us    |  bch_irq();                  <----
   63.219283 |   1)               |      /* jiffies left 250 */
   63.219285 |   1) ! 358.625 us  |    }
   63.219286 |   1)   2.750 us    |    gpmi_count_bitflips();
   63.219289 |   1) ! 366.000 us  |  }
   63.219290 |   1)               |  gpmi_ecc_read_page() {
   63.219291 |   1)   0.750 us    |    gpmi_bch_layout_std();
   63.219293 |   1)               |    gpmi_nfc_exec_op() {
   63.219294 |   1)               |      gpmi_chain_command() {
   63.219295 |   1)               |        mxs_dma_prep_slave_sg() {
   63.219295 |   0)   1.875 us    |  mxs_dma_int_handler();      <----
   63.219296 |   1)               |          /* mxs chan ccw idx: 6 */
   63.219297 |   1)   2.250 us    |        }
   63.219298 |   1)               |        mxs_dma_prep_slave_sg() {
   63.219298 |   0)   1.000 us    |  mxs_dma_tasklet();
   63.219299 |   1)               |          /* mxs chan ccw idx: 0 */
   63.219300 |   1)   1.625 us    |        }
   63.219300 |   1)   6.375 us    |      }
   63.219301 |   1)               |      gpmi_chain_command() {
   63.219302 |   1)               |        mxs_dma_prep_slave_sg() {
   63.219303 |   1)               |          /* mxs chan ccw idx: 1 */
   63.219304 |   1)   1.625 us    |        }
   63.219305 |   1)               |        mxs_dma_prep_slave_sg() {
   63.219306 |   1)               |          /* mxs chan ccw idx: 2 */
   63.219306 |   1)   1.875 us    |        }
   63.219307 |   1)   6.000 us    |      }
   63.219308 |   1)               |      /* gpmi_chain_wait_ready */
   63.219308 |   1)               |      mxs_dma_prep_slave_sg() {
   63.219309 |   1)               |        /* mxs chan ccw idx: 3 */
   63.219310 |   1)   2.000 us    |      }
   63.219311 |   1)               |      /* gpmi_chain_data_read */
   63.219312 |   1)               |      mxs_dma_prep_slave_sg() {
   63.219313 |   1)               |        /* mxs chan ccw idx: 4 */
   63.219314 |   1)   1.750 us    |      }
   63.219315 |   1)   0.625 us    |      mxs_dma_tx_submit();
   63.219316 |   1)   0.875 us    |      mxs_dma_enable_chan();
   64.224227 |   1)               |      /* jiffies left 0 */

In the first gpmi_nfc_exec_op, bch_irq comes first and gpmi_nfc_exec_op
exits, but DMA IRQ still not happened yet until the middle of following
gpmi_nfc_exec_op, the first DMA transfer index get messed and DMA get
timeout.

To fix the issue, when there is bch ops in DMA chain, the
gpmi_nfc_exec_op should wait for both completions rather than bch
completion only.

Fixes: ef347c0cfd ("mtd: rawnand: gpmi: Implement exec_op")
Signed-off-by: Han Xu <han.xu@nxp.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20201209035104.22679-3-han.xu@nxp.com
 2020-12-10 22:37:33 +01:00
Han Xu
46337d1582 mtd: rawnand: gpmi: Fix the driver only sense CS0 R/B issue 
Set the GPMI CTRL1 GANGED_RDYBUSY bit so driver can sense the R/B signal
from all CS.

For the NAND chip MT29F64G08AFAAAWP, only the first chip detected
without the patch.

[    3.764118] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0x68
[    3.770613] nand: Micron MT29F64G08AFAAAWP
[    3.774752] nand: 4096 MiB, SLC, erase size: 1024 KiB, page size: 8192, OOB size: 448
[    3.786421] Bad block table found at page 524160, version 0x01
[    3.792730] Bad block table found at page 524032, version 0x01

After applying the patch

[    3.764445] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0x68
[    3.770941] nand: Micron MT29F64G08AFAAAWP
[    3.775080] nand: 4096 MiB, SLC, erase size: 1024 KiB, page size: 8192, OOB size: 448
[    3.784390] nand: 2 chips detected
[    3.790900] Bad block table found at page 524160, version 0x01
[    3.796776] Bad block table found at page 1048448, version 0x01

Signed-off-by: Han Xu <han.xu@nxp.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20201209035104.22679-2-han.xu@nxp.com
 2020-12-10 22:37:33 +01:00
Fabio Estevam
d1c3ede6a3 mtd: rawnand: gpmi: Use of_device_get_match_data() 
The retrieval of driver data via of_device_get_match_data() can make
the code simpler.

Use of_device_get_match_data() to simplify the code.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20201126030946.2058-1-festevam@gmail.com
 2020-12-10 22:37:33 +01:00
Zhang Qilong
1b391c7f2e mtd: rawnand: gpmi: fix reference count leak in gpmi ops 
pm_runtime_get_sync() will increment pm usage at first and it
will resume the device later. If runtime of the device has
error or device is in inaccessible state(or other error state),
resume operation will fail. If we do not call put operation to
decrease the reference, it will result in reference leak in
the two functions(gpmi_init and gpmi_nfc_exec_op). Moreover,
this device cannot enter the idle state and always stay busy or
other non-idle state later. So we fixed it through adding
pm_runtime_put_noidle.

Fixes: 5bc6bb603b ("mtd: rawnand: gpmi: Fix suspend/resume problem")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Acked-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20201107110552.1568742-1-zhangqilong3@huawei.com
 2020-12-10 22:37:32 +01:00
Krzysztof Kozlowski
78a7349166 mtd: rawnand: gpmi: Simplify with dev_err_probe() 
Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and the error value gets printed.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200901142535.12819-3-krzk@kernel.org
 2020-09-30 16:44:17 +02:00
Miquel Raynal
53576c7bfc mtd: rawnand: Use nanddev_get/set_ecc_requirements() when relevant 
Instead of accessing ->strength/step_size directly.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-15-miquel.raynal@bootlin.com
 2020-09-28 15:59:48 +02:00
Miquel Raynal
bace41f80f mtd: rawnand: Use the new ECC engine type enumeration 
Mechanical switch from the legacy "mode" enumeration to the new
"engine type" enumeration in drivers and board files.

The device tree parsing is also updated to return the new enumeration
from the old strings.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-11-miquel.raynal@bootlin.com
 2020-09-28 15:59:42 +02:00
Miquel Raynal
4c46667b3d mtd: rawnand: s/data_interface/interface_config/ 
The name/suffix data_interface is a bit misleading in that the field
or functions actually represent a configuration that can be applied by
the controller/chip. Let's rename all fields/functions/hooks that are
worth renaming.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
 2020-06-26 08:35:07 +02:00
Miquel Raynal
e5e5631cc8 mtd: rawnand: gpmi: Use nand_extract_bits() 
Drop the use of gpmi_copy_bits() in favor of the NAND helper
nand_extract_bits().

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200508171805.8627-1-miquel.raynal@bootlin.com
 2020-05-31 10:53:37 +02:00
Dinghao Liu
8e935b92d2 mtd: rawnand: gpmi: Fix runtime PM imbalance in gpmi_nand_probe 
There is no reason that the failure of __gpmi_enable_clk()
could lead to PM usage counter decrement.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200522101713.24350-1-dinghao.liu@zju.edu.cn
 2020-05-31 10:53:37 +02:00
Dinghao Liu
550e68ea36 mtd: rawnand: gpmi: Fix runtime PM imbalance on error 
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200522095139.19653-1-dinghao.liu@zju.edu.cn
 2020-05-31 10:53:37 +02:00
Miquel Raynal
194f6c48cd mtd: rawnand: gpmi: Stop using nand_release() 
This helper is not very useful and very often people get confused:
they use nand_release() instead of nand_cleanup().

Let's stop using nand_release() by calling mtd_device_unregister() and
nand_cleanup() directly.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Han Xu <han.xu@nxp.com>
Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-20-miquel.raynal@bootlin.com
 2020-05-31 10:53:34 +02:00
Boris Brezillon
ce446b4b2d mtd: rawnand: Take check_only into account 
->exec_op() is passed a check_only argument that encodes when the
controller should just check whether the operation is supported or not
without executing it. Some controllers simply ignore this arguments,
others don't but keep modifying some of the registers before returning.
Let's fix all those drivers.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200418194217.1016060-1-boris.brezillon@collabora.com
 2020-05-10 21:16:01 +02:00
Peter Ujfalusi
7cd8c0adb4 mtd: rawnand: gpmi: Use dma_request_chan() instead dma_request_slave_channel() 
dma_request_slave_channel() is a wrapper on top of dma_request_chan()
eating up the error code.

Use using dma_request_chan() directly to return the real error code.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200227123749.24064-2-peter.ujfalusi@ti.com
 2020-03-11 16:17:54 +01:00
Esben Haabendal
d70486668c mtd: rawnand: gpmi: Restore nfc timing setup after suspend/resume 
As we reset the GPMI block at resume, the timing parameters setup by a
previous exec_op is lost.  Rewriting GPMI timing registers on first exec_op
after resume fixes the problem.

Fixes: ef347c0cfd ("mtd: rawnand: gpmi: Implement exec_op")
Cc: stable@vger.kernel.org
Signed-off-by: Esben Haabendal <esben@geanix.com>
Acked-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
 2020-01-17 22:45:09 +01:00
Esben Haabendal
5bc6bb603b mtd: rawnand: gpmi: Fix suspend/resume problem 
On system resume, the gpmi clock must be enabled before accessing gpmi
block.  Without this, resume causes something like

[  661.348790] gpmi_reset_block(5cbb0f7e): module reset timeout
[  661.348889] gpmi-nand 1806000.gpmi-nand: Error setting GPMI : -110
[  661.348928] PM: dpm_run_callback(): platform_pm_resume+0x0/0x44 returns -110
[  661.348961] PM: Device 1806000.gpmi-nand failed to resume: error -110

Fixes: ef347c0cfd ("mtd: rawnand: gpmi: Implement exec_op")
Cc: stable@vger.kernel.org
Signed-off-by: Esben Haabendal <esben@geanix.com>
Acked-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
 2020-01-17 22:45:07 +01:00
Colin Ian King
6bd2a42aa6 mtd: rawnand: gpmi: remove double assignment to block_size 
The variable block_size is being assigned to itself and to
geo->ecc_chunk_size.  Clean up the double assignment by removing
the assignment to itself.

Addresses-Coverity: ("Evaluation order violation")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
 2019-06-27 20:06:42 +02:00
Sascha Hauer
ef347c0cfd mtd: rawnand: gpmi: Implement exec_op 
The gpmi driver performance suffers from NAND operations being split
in multiple small DMA transfers. This has been forced by the NAND layer
in the former days, but now with exec_op we can use the controller as
intended.

With this patch gpmi_nfc_exec_op becomes the main entry point to NAND
operations. Here all instructions are collected and chained as separate
DMA transfers. In the end whole chain is fired and waited to be
finished. gpmi_nfc_exec_op only does the hardware operations, bad block
marker swapping and buffer scrambling is done by the callers. It's worth
noting that the nand_*_op functions always take the buffer lengths for
the data that the NAND chip actually transfers. When doing BCH we have
to calculate the net data size from the raw data size in some places.

This patch has been tested with 2048/64 and 2048/128 byte NAND on
i.MX6q. mtd_oobtest, mtd_subpagetest and mtd_speedtest run without
errors. nandbiterrs, nandpagetest and nandsubpagetest userspace tests
from mtdutils run without errors and UBIFS can successfully be mounted.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
 2019-06-27 20:05:30 +02:00
Sascha Hauer
ceeeb99cd8 dmaengine: mxs: rename custom flag 
The mxs dma driver uses the flags parameter in dmaengine_prep_slave_sg() for
custom flags, but still uses the dmaengine specific names of the flags.
Do a little bit better and at least give the flag a custom name.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
 2019-06-27 20:05:30 +02:00
Sascha Hauer
e0ddaab768 dmaengine: mxs: Add header file to be shared with gpmi nand driver 
The mxs dma driver can do PIO transfers. A pointer to the PIO words
to transfer is passed in the struct scatterlist * argument of
dmaengine_prep_slave_sg(). It's quite ugly and non obvious to cast
u32 * to struct scatterlist * each time when calling
dmaengine_prep_slave_sg(), so add a static inline wrapper function
to be called by the user along with a description what is going on.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
 2019-06-27 20:05:29 +02:00
Sascha Hauer
475345e89c mtd: rawnand: gpmi: drop unnecessary flag 
The DMA_PREP_INTERRUPT flag is no longer needed by the mxs DMA driver,
drop it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
 2019-06-27 20:05:29 +02:00
Sascha Hauer
041414682b mtd: rawnand: gpmi: use runtime PM to manage clocks 
The gpmi driver aggressively en/disables the clocks between operations
which has significant performance cost. Use runtime PM to get rid of
this bottleneck.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
 2019-06-27 20:05:28 +02:00
Sascha Hauer
1ee514d00d mtd: rawnand: gpmi: Drop unnecessary restoring of previous chipselection 
The i.MX23 specific option read code is called right after nand_scan. We
can rely on the NAND core having disabled the chipselect, so there's no
point in restoring the original chip select after NAND operations. Drop
it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
 2019-06-27 20:05:28 +02:00
Sascha Hauer
ad8b4f1454 mtd: rawnand: gpmi: remove unused parameters 
gpmi_ecc_read_page_data uses the page parameter only for a debug printf,
so we can drop the parameter and the debug printf. Moving the oob
delivery from gpmi_ecc_read_page_data to gpmi_ecc_read_page makes the
oob_required parameter unnecessary aswell.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
 2019-06-27 20:05:27 +02:00
Sascha Hauer
b05d73d2ce mtd: rawnand: gpmi: read buf in nand_read_page_op 
The driver calls nand_read_page_op without a buffer passed and then
calls chip->legacy.read_buf to read the buffer afterwards which is
the same as passing the buffer nand_read_page_op in the first place.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
 2019-06-27 20:05:27 +02:00
Sascha Hauer
41e2322b25 mtd: rawnand: gpmi: Remove unnecessary variables 
this->page_buffer_virt and this->payload_virt are always set to the same
value, so drop the former and just use the latter. Same for
this->page_buffer_virt and this->payload_virt.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
 2019-06-27 20:05:27 +02:00
Sascha Hauer
3045f8e369 mtd: rawnand: gpmi: move all driver code into single file 
This moves the whole driver into a single C file. The filename gpmi-lib
implies that it implements library functions, but in fact there are
several cases where functions in gpmi-lib.c call back into functions in
gpmi-nand.c. With this one has to constantly jump between those two
files, so moving it into a single file improves readability, even when
the file gets quite large.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
 2019-06-27 20:05:26 +02:00
Boris Brezillon
6a1b66d6c8 mtd: rawnand: Get rid of chip->ecc_{strength,step}_ds 
nand_device embeds a nand_ecc_req object which contains the minimum
strength and step-size required by the NAND device.

Drop the chip->ecc_{strength,step}_ds fields and use
chip->base.eccreq.{strength,step_size} instead.

Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
 2019-04-08 10:21:16 +02:00
Boris Brezillon
6c836d515f mtd: rawnand: Get rid of chip->chipsize 
The target size can now be returned by nanddev_get_targetsize(). Get
rid of the chip->chipsize field and use this helper instead.

Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
 2019-04-08 10:21:15 +02:00
Boris Brezillon
eeab717483 mtd: rawnand: Provide a helper to get chip->data_buf 
We plan to move cache related fields to a pagecache struct in nand_chip
but some drivers access ->pagebuf directly to invalidate the cache
before they start using ->data_buf.

Let's provide an helper that returns a pointer to ->data_buf after
invalidating the cache.

Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
 2019-04-08 10:21:13 +02:00
Fabio Estevam
f67ed1461e mtd: rawnand: gpmi: Introduce GPMI_IS_MXS() macro 
Introduce a GPMI_IS_MXS() macro to take into account the cases
when mx23 or mx28 are used, which helps readability.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
 2019-03-21 16:44:53 +01:00
Boris Brezillon
7b6a9b28ec mtd: rawnand: Deprecate the dummy_controller field 
We try to force NAND controller drivers to properly separate the NAND
controller object from the NAND chip one, so let's deprecate the dummy
controller object embedded in nand_chip to encourage them to create
their own instance.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
 2018-12-07 10:58:11 +01:00
Boris Brezillon
7a08dbaedd mtd: rawnand: Move ->setup_data_interface() to nand_controller_ops 
->setup_data_interface() is a controller specific method and should
thus be placed in nand_controller_ops.

In order to make that work with controllers that support keeping
pre-configured timings we need to add a new NAND_KEEP_TIMINGS flag to
inform the core it should skip the timings selection step.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Tested-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
 2018-12-07 10:38:27 +01:00
Boris Brezillon
7d6c37e90c mtd: rawnand: Deprecate the ->select_chip() hook 
Now that the CS line to be selected is passed to ->exec_op() and
stored in chip->cur_cs and after patching all drivers implementing
->exec_op() to stop implementing this method, we can deprecate it by
moving it to the nand_legacy structure.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Tested-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
 2018-12-07 10:38:27 +01:00
Boris Brezillon
1d0178593d mtd: rawnand: Add nand_[de]select_target() helpers 
Add a wrapper to prevent drivers and core code from directly calling
the ->select_chip hook which we are about to deprecate.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Tested-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
 2018-12-07 10:38:25 +01:00
Boris Brezillon
cdc784c743 mtd: rawnand: Deprecate ->block_{bad,markbad}() hooks 
Those hooks have been overloaded by some drivers for bad reasons:
either the driver was not fitting in the NAND framework and should
have been an MTD driver (docg4), or it was not properly implementing
the OOB read/write request or had a weird layout where BBM are trashed.
In any case, we should discourage people from overloading those
methods and encourage them to fix their driver instead.

Move the ->block_{bad,markbad}() hooks to the nand_legacy struct to
make it clear.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
 2018-10-03 11:12:25 +02:00
Boris Brezillon
8395b753d7 mtd: rawnand: Deprecate ->dev_ready() and ->waitfunc() 
Those hooks have been replaced by ->exec_op(). Move them to the
nand_legacy struct.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
 2018-10-03 11:12:25 +02:00
Boris Brezillon
bf6065c6c0 mtd: rawnand: Deprecate ->cmd_ctrl() and ->cmdfunc() 
Those hooks have been replaced by ->exec_op(). Move them to the
nand_legacy struct.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
 2018-10-03 11:12:25 +02:00
Boris Brezillon
716bbbabcc mtd: rawnand: Deprecate ->{read, write}_{byte, buf}() hooks 
All those hooks have been replaced by ->exec_op(). Move them to the
nand_legacy struct.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
 2018-10-03 11:12:25 +02:00
Boris Brezillon
50a487e771 mtd: rawnand: Pass a nand_chip object to chip->dev_ready() 
Let's make the raw NAND API consistent by patching all helpers and
hooks to take a nand_chip object instead of an mtd_info one or
remove the mtd_info object when both are passed.

Let's tackle the chip->dev_ready() hook.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
 2018-10-03 11:12:25 +02:00
Boris Brezillon
0f808c1602 mtd: rawnand: Pass a nand_chip object to chip->cmd_ctrl() 
Let's make the raw NAND API consistent by patching all helpers and
hooks to take a nand_chip object instead of an mtd_info one or
remove the mtd_info object when both are passed.

Let's tackle the chip->cmd_ctrl() hook.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
 2018-10-03 11:12:25 +02:00
Boris Brezillon
c17556f545 mtd: rawnand: Pass a nand_chip object to chip->block_xxx() hooks 
Let's make the raw NAND API consistent by patching all helpers and
hooks to take a nand_chip object instead of an mtd_info one or
remove the mtd_info object when both are passed.

Let's tackle all chip->block_xxx() hooks at once.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
 2018-10-03 11:12:25 +02:00
Boris Brezillon
758b56f58b mtd: rawnand: Pass a nand_chip object to chip->select_chip() 
Let's make the raw NAND API consistent by patching all helpers and
hooks to take a nand_chip object instead of an mtd_info one or
remove the mtd_info object when both are passed.

Let's tackle the chip->select_chip() hook.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
 2018-10-03 11:12:25 +02:00
Boris Brezillon
c0739d8572 mtd: rawnand: Pass a nand_chip object to chip->write_xxx() hooks 
Let's make the raw NAND API consistent by patching all helpers and
hooks to take a nand_chip object instead of an mtd_info one or
remove the mtd_info object when both are passed.

Let's tackle all chip->write_xxx() hooks at once.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
 2018-10-03 11:12:25 +02:00
Boris Brezillon
7e534323c4 mtd: rawnand: Pass a nand_chip object to chip->read_xxx() hooks 
Let's make the raw NAND API consistent by patching all helpers and
hooks to take a nand_chip object instead of an mtd_info one or
remove the mtd_info object when both are passed.

Let's tackle all chip->read_xxx() hooks at once.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
 2018-10-03 11:12:25 +02:00
Boris Brezillon
767eb6fbde mtd: rawnand: Pass a nand_chip object to ecc->write_xxx() hooks 
Let's make the raw NAND API consistent by patching all helpers and
hooks to take a nand_chip object instead of an mtd_info one or
remove the mtd_info object when both are passed.

Let's tackle all ecc->write_xxx() hooks at once.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
 2018-10-03 11:12:25 +02:00
Boris Brezillon
b976168757 mtd: rawnand: Pass a nand_chip object to ecc->read_xxx() hooks 
Let's make the raw NAND API consistent by patching all helpers and
hooks to take a nand_chip object instead of an mtd_info one or
remove the mtd_info object when both are passed.

Let's tackle all ecc->read_xxx() hooks at once.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Acked-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
 2018-10-03 11:12:25 +02:00
Boris Brezillon
59ac276f22 mtd: rawnand: Pass a nand_chip object to nand_release() 
Let's make the raw NAND API consistent by patching all helpers to
take a nand_chip object instead of an mtd_info one.

Now is nand_release()'s turn.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
 2018-10-03 11:12:25 +02:00
Boris Brezillon
00ad378f30 mtd: rawnand: Pass a nand_chip object to nand_scan() 
Let's make the raw NAND API consistent by patching all helpers to take
a nand_chip object instead of an mtd_info one.

We start with nand_scan().

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
 2018-10-03 11:12:25 +02:00