Let's pimp the DDI encoder->name to reflect what the spec calls them.
Ie. on pre-tgl DDI A-F, on tgl+ DDI A-C or DDI TC1-6.
Also since each encoder is really a combination of the DDI and the PHY
we include the PHY name as well.
ICL is a bit special since it already has the two different types
of DDIs (combo or TC) but it still calls them just DDI A-F regarless
of the type. For that let's add an extra "(TC)" note to remind
is which type of DDI it really is.
The code is darn ugly, but not sure there's much we can do about it.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201028213323.5423-4-ville.syrjala@linux.intel.com
The mutex within the panfrost_queue_state should have the lifetime of
the queue, however it was erroneously initialised/destroyed during
panfrost_job_{open,close} which is called every time a client
opens/closes the drm node.
Move the initialisation/destruction to panfrost_job_{init,fini} where it
belongs.
Fixes: 1a11a88cfd ("drm/panfrost: Fix job timeout handling")
Signed-off-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201029170047.30564-1-steven.price@arm.com
When the GPU's ACE-Lite interface is fully wired up and capable of
snooping CPU caches, it may be described as "dma-coherent" in
devicetree, which will already inform the DMA layer not to perform
unnecessary cache maintenance. However, we still need to ensure that
the GPU uses the appropriate cacheable outer-shareable attributes in
order to generate the requisite snoop signals, and that CPU mappings
don't create a mismatch by using a non-cacheable type either.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7024ce18c1cb1a226e918037d49175571db0b436.1600780574.git.robin.murphy@arm.com
This reverts commit f878122841 ("drm/amdgpu:
Fix bug where DPM is not enabled after hibernate and resume").
It was intended to fix Hawaii S4(hibernation) issue but break S3. As
ixFEATURE_STATUS is filled with garbage data on resume which can be
only cleared by reloading smc firmware(but that will involve many
changes). So, we will revert this S4 fix and seek a new way.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Tested-by: Sandeep Raghuraman <sandy.8925@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So that the succeeding resume can be performed based on
a clean state.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Tested-by: Sandeep Raghuraman <sandy.8925@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Which can be used for S4(hibernation) support.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Tested-by: Sandeep Raghuraman <sandy.8925@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Correct some registers bitmasks and add mmBIOS_SCRATCH_7
reset.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Tested-by: Sandeep Raghuraman <sandy.8925@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This can address the random SDMA hang after pci config reset
seen on Hawaii.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Tested-by: Sandeep Raghuraman <sandy.8925@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Navi14 0x7340/C9 SKU has no display and video support, remove them.
Signed-off-by: Flora Cui <flora.cui@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Correct spelling in one of the comment.
s/defalut/default/p
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
core_link_write_dpcd() returns enum dc_status, not ddc_result:
display/dc/core/dc_link_dp.c: In function 'dp_set_panel_mode':
display/dc/core/dc_link_dp.c:4237:11: warning: implicit conversion from 'enum dc_status' to 'enum ddc_result'
[-Wenum-conversion]
Avoid the warning by using the correct enum in the caller.
Fixes: 0b22632243 ("drm/amd/display: Synchronous DisplayPort Link Training")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A recent change added two uint16_t elements to PPTable_t and reduced the
uint32_t array down to 8 elements. This results in the dev_info printing
of pptable->SkuReserved[8] accessing a value that is out-of-range on
array SkuReserved. The array has been shrunk by 1 element, so remove
this extraneous dev_info message.
Addresses-Coverity: ("Out-of-bounds read")
Fixes: 1dc3c5a95b ("drm/amd/pm: update driver if file for sienna cichlid")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following coccinelle report:
./drivers/gpu/drm/amd/display/dc/calcs/dce_calcs.c:1367:3-5:
WARNING: possible condition with no effect (if == else)
Both branches are the same, so remove the if/else altogether.
Fixes: 81875979f0 ("drm/amd/display: Remove extra pairs of parentheses in dce_calcs.c")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's unused and identical to dal_cmd_tbl_helper_dce112_get_table2.
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need for a separate config option at this point.
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit f878122841 ("drm/amdgpu:
Fix bug where DPM is not enabled after hibernate and resume").
It was intended to fix Hawaii S4(hibernation) issue but break S3. As
ixFEATURE_STATUS is filled with garbage data on resume which can be
only cleared by reloading smc firmware(but that will involve many
changes). So, we will revert this S4 fix and seek a new way.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Tested-by: Sandeep Raghuraman <sandy.8925@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So that the succeeding resume can be performed based on
a clean state.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Tested-by: Sandeep Raghuraman <sandy.8925@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Which can be used for S4(hibernation) support.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Tested-by: Sandeep Raghuraman <sandy.8925@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Correct some registers bitmasks and add mmBIOS_SCRATCH_7
reset.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Tested-by: Sandeep Raghuraman <sandy.8925@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This can address the random SDMA hang after pci config reset
seen on Hawaii.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Tested-by: Sandeep Raghuraman <sandy.8925@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use ">= CHIP_SIENNA_CICHLID" to replace per asic check
Signed-off-by: Chengming Gui <Jack.Gui@amd.com>
Reviewed-by: Hawking.Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
First of all don't snprintf into a char buffer allocated on the stack with
a constant hubname.
Then cleanup to exit the function early in case of a ratelimit or SRIOV.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need this to pass dp compliance.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Reviewed-by: Nikola Cornij <nikola.cornij@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since the unique_id is now obtained in amdgpu in smu_late_init,
topology misses getting the value during KFD device initialization.
To work around this, we use amdgpu_amdkfd_get_unique_id to get
the unique_id at read time. Due to this, we can remove unique_id from
the kfd_dev structure, since we only need it in the KFD node properties
struct
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to enable the rest functions of swSMU for vangogh.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add some swSMU functions for vangogh, to support the
sensor info on "hwmon" and pm info.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add one new function to get 32 bit feature mask for
vangogh.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to remove some redundant smu message mapping for vangogh.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to set the initial value of pm info to zero.
The "value64" is ported to the hwmon and debugfs node, it is a uint64 type.
When it is used for NV10/VEGA10/VEGA20, its word size is appropriate,
because NV10/VEGA10/VEGA20 has a 64bit smu feature mask, which is separated to high 32bit and low 32bit.
But some asic has only 32bit smu feature mask,and this 32bit mask will fill the low 32bit of "value64".
So if this "value64" is not initialized to zero, the high 32bit will be
filled by a meaningless value, when the whole "value64" is ported to the
"SMC Feature Mask" in the "amdgpu_pm_info" on some specific asic, it
will be a wrong value.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to update the smu v11.5 driver interface header for vangogh.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add UMD Pstate Msg Parameters for vangogh temporarily,
the values refer to renoir.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add new smc message mapping for vangogh.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to update the smu v11.5 firmware header for vangogh.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to update the smu v11.5 smc header for vangogh.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In amdgpu_ras_reset_gpu, because bad pages may not be freed,
it has high probability to reserve bad pages failed.
Change to reserve bad pages when freeing VRAM.
v2:
1. avoid allocating the drm_mm node outside of amdgpu_vram_mgr.c
2. move bad page reserving into amdgpu_ras_add_bad_pages, if vram mgr
reserve bad page failed, it will put it into pending list, otherwise
put it into processed list;
3. remove amdgpu_ras_release_bad_pages, because retired page's info has
been moved into amdgpu_vram_mgr
v3:
1. formate code style;
2. rename amdgpu_vram_reserve_scope as amdgpu_vram_reservation;
3. rename scope_pending as reservations_pending;
4. rename scope_processed as reserved_pages;
5. change to iterate over all the pending ones and try to insert them
with drm_mm_reserve_node();
v4:
1. rename amdgpu_vram_mgr_reserve_scope as
amdgpu_vram_mgr_reserve_range;
2. remove unused include "amdgpu_ras.h";
3. rename amdgpu_vram_mgr_check_and_reserve as
amdgpu_vram_mgr_do_reserve;
4. refine amdgpu_vram_mgr_reserve_range to call
amdgpu_vram_mgr_do_reserve.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <hawking.zhang@amd.com>
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Because bad pages saving has been moved to UMC error interrupt callback,
which will trigger a new GPU reset after saving.
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Hawking Zhang <hawking.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of saving bad pages in amdgpu_ras_reset_gpu, it will reduce
the unnecessary calling of amdgpu_ras_save_bad_pages.
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Hawking Zhang <hawking.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Navi14 0x7340/C9 SKU has no display and video support, remove them.
Signed-off-by: Flora Cui <flora.cui@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes this warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_ddc.c: In function ‘defer_delay_converter_wa’:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_ddc.c:285:2: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
285 | if (link->dpcd_caps.branch_dev_id == DP_BRANCH_DEVICE_ID_0080E1 &&
| ^~
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_ddc.c:291:3: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
291 | if (link->dpcd_caps.branch_dev_id == DP_BRANCH_DEVICE_ID_006037 &&
| ^~
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Remove dup mmio handler for BXT/APL. Otherwise mmio handler will fail
to init.
- Add engine GPR with F_CMD_ACCESS since BXT/APL will load them via
LRI. Otherwise, guest will enter failsafe mode.
V2:
Use RCS/BCS GPR macros instead of offset.
Revise commit message.
V3:
Use GEN8_RING_CS_GPR macros on ring base.
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20201016052913.209248-1-colin.xu@intel.com
One issue exposed after below commit with which the system will freeze
at suspend after vGPU is created (no need to activate the vGPU).
commit e6ba764802 ("drm/i915: Remove i915->kernel_context")
Old implementation pin the intel_context at setup_submission and
unpin it at clean_submission. So after some vGPU is created, the
intel_context is always pinned there although no workload using it.
It will then block i915 enter suspend state.
There is no need to pin it all the time. Pin/unpin it around workload
lifecycle is more reasonable. After GVT enabled suspend/resume, the
pinned intel_context will also get unpined when userspace put VM process
into suspend state since all workloads are retired, then it's safe to
unpin all intel_context for workloads created. So move the pin/unpin to
create_workload and destroy_workload, while still keep the
create/destroy in old place.
V2:
Rebase.
Fixes: e6ba764802 ("drm/i915: Remove i915->kernel_context")
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20201016054059.238371-1-colin.xu@intel.com
drm-misc-fixes next.
Some reset fixes for the mantix panel, some fixes for a scaler issue on
sun4i, many kernel-doc fixes and various fixes for vc4 (mostly HDMI audio
related)
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCX5r8+gAKCRDj7w1vZxhR
xb0tAP92TkizJ/MBBnMTPRkVPnovK8TIy6m6LWmTrLllUSocWwEAqhWKFngB4Q2X
Fpnen5lcjuXstZJOC403SM/ZS1gCfgs=
=j6zS
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2020-10-29' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
First round of drm-misc-fixes with a couple of leftovers from
drm-misc-fixes next.
Some reset fixes for the mantix panel, some fixes for a scaler issue on
sun4i, many kernel-doc fixes and various fixes for vc4 (mostly HDMI audio
related)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201029173414.fxrl5jacsdwqheto@gilmour.lan
While I thought I had this correct (since it actually did reject modes
like I expected during testing), Ville Syrjala from Intel pointed out
that the logic here isn't correct. max_clock refers to the max data rate
supported by the DP encoder. So, limiting it to the output of ds_clock (which
refers to the maximum dotclock of the downstream DP device) doesn't make any
sense. Additionally, since we're using the connector's bpc as the canonical BPC
we should use this in mode_valid until we support dynamically setting the bpp
based on bandwidth constraints.
https://lists.freedesktop.org/archives/dri-devel/2020-September/280276.html
For more info.
So, let's rewrite this using Ville's advice.
v2:
* Ville pointed out I mixed up the dotclock and the link rate. So fix that...
* ...and also rename all the variables in this function to be more appropriately
labeled so I stop mixing them up.
* Reuse the bpp from the connector for now until we have dynamic bpp selection.
* Use use DIV_ROUND_UP for calculating the mode rate like i915 does, which we
should also have been doing from the start
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 409d38139b ("drm/nouveau/kms/nv50-: Use downstream DP clock limits for mode validation")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ville also pointed out that I got a lot of the logic here wrong as well, whoops.
While I don't think anyone's likely using 3D output with nouveau, the next patch
will make nouveau_conn_mode_valid() make a lot less sense. So, let's just get
rid of it and open-code it like before, while taking care to move the 3D frame
packing calculations on the dot clock into the right place.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: d6a9efece7 ("drm/nouveau/kms/nv50-: Share DP SST mode_valid() handling with MST")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.8+
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
With this we try to detect if the endianess switch works and assume LE if
not. Suggested by Ben.
Fixes: 51c05340e4 ("drm/nouveau/device: detect if changing endianness failed")
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Cc: <stable@vger.kernel.org> # v5.8+
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
we can't use nouveau_bo_ref here as no ttm object was allocated and
nouveau_bo_ref mainly deals with that. Simply deallocate the object.
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Not entirely sure why this never came up when I originally tested this
(maybe some BIOSes already have this setup?) but the ->caps_init vfunc
appears to cause the display engine to throw an exception on driver
init, at least on my ThinkPad P72:
nouveau 0000:01:00.0: disp: chid 0 mthd 008c data 00000000 0000508c 0000102b
This is magic nvidia speak for "You need to have the DMA notifier offset
programmed before you can call NV507D_GET_CAPABILITIES." So, let's fix
this by doing that, and also perform an update afterwards to prevent
racing with the GPU when reading capabilities.
v2:
* Don't just program the DMA notifier offset, make sure to actually
perform an update
v3:
* Don't call UPDATE()
* Actually read the correct notifier fields, as apparently the
CAPABILITIES_DONE field lives in a different location than the main
NV_DISP_CORE_NOTIFIER_1 field. As well, 907d+ use a different
CAPABILITIES_DONE field then pre-907d cards.
v4:
* Don't forget to check the return value of core507d_read_caps()
v5:
* Get rid of NV50_DISP_CAPS_NTFY[14], use NV50_DISP_CORE_NTFY
* Disable notifier after calling GetCapabilities()
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 4a2cb4181b ("drm/nouveau/kms/nv50-: Probe SOR and PIOR caps for DP interlacing support")
Cc: <stable@vger.kernel.org> # v5.8+
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The user level OpenCL code shouldn't have to align start and end
addresses to a page boundary. That is better handled in the nouveau
driver. The npages field is also redundant since it can be computed
from the start and end addresses.
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We have a few displays in CI that always report their EDID as a bunch of
zeroes. This is consistent behaviour, so one assumes intentional
indication of an "absent" EDID. Flagging these consistent warnings
detracts from CI.
One option would be to ignore the zero EDIDs as intentional behaviour,
but Ville would like to keep the information available for debugging.
The simple alternative then is to reduce the loglevel for all the EDID
dumping from WARN to DEBUG so the information is present but not annoy
CI. Note that the bad EDID dumping is already only shown if
drm.debug=KMS, it's just the loglevel chosen was set to be caught by CI
if it ever occurred as it was expected to be an internal error not
external.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2203
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201029213042.11672-1-chris@chris-wilson.co.uk
Restore RPS for ILK-M. We lost it when an extra HAS_RPS()
check appeared in intel_rps_enable().
Unfortunaltey this just makes the performance worse on my
ILK because intel_ips insists on limiting the GPU freq to
the minimum. If we don't do the RPS init then intel_ips will
not limit the frequency for whatever reason. Either it can't
get at some required information and thus makes wrong decisions,
or we mess up some weights/etc. and cause it to make the wrong
decisions when RPS init has been done, or the entire thing is
just wrong. Would require a bunch of reverse engineering to
figure out what's going on.
Cc: stable@vger.kernel.org
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: 9c878557b1 ("drm/i915/gt: Use the RPM config register to determine clk frequencies")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201021131443.25616-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 2bf06370bc)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We are incorrectly limiting the max allocation size as per the mm
max_order, which is effectively the largest power-of-two that we can fit
in the region size. However, it's normal to setup the region or
allocator with a non-power-of-two size(for example 3G), which we should
already handle correctly, except it seems for the early too-big-check.
v2: make sure we also exercise the I915_BO_ALLOC_CONTIGUOUS path, which
is quite different, since for that we are actually limited by the
largest power-of-two that we can fit within the region size. (Chris)
Fixes: b908be543e ("drm/i915: support creating LMEM objects")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: CQ Tang <cq.tang@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201021103606.241395-1-matthew.auld@intel.com
(cherry picked from commit 83ebef47f8)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Not used any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Madhav Chauhan <madhav.chauhan@amd.com>
Tested-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/397087/?series=83051&rev=1
Not needed as far as I can see.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Madhav Chauhan <madhav.chauhan@amd.com>
Tested-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/397085/?series=83051&rev=1
Not needed as far as I can see.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Madhav Chauhan <madhav.chauhan@amd.com>
Tested-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/397084/?series=83051&rev=1
It should be able to handle all cases now.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Madhav Chauhan <madhav.chauhan@amd.com>
Tested-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/397083/?series=83051&rev=1
It should be able to handle all cases now.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Madhav Chauhan <madhav.chauhan@amd.com>
Tested-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/397082/?series=83051&rev=1
It should be able to handle all cases here.
v2: fix debugfs as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Madhav Chauhan <madhav.chauhan@amd.com>
Tested-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/397088/?series=83051&rev=1
It should be able to handle all cases here.
v2: fix debugfs as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Madhav Chauhan <madhav.chauhan@amd.com>
Tested-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/397086/?series=83051&rev=1
Provide the necessary parameters by all drivers and use the new pool alloc
when no driver specific function is provided.
v2: fix the GEM VRAM helpers
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Madhav Chauhan <madhav.chauhan@amd.com>
Tested-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/397081/?series=83051&rev=1
This replaces the spaghetti code in the two existing page pools.
First of all depending on the allocation size it is between 3 (1GiB) and
5 (1MiB) times faster than the old implementation.
It makes better use of buddy pages to allow for larger physical contiguous
allocations which should result in better TLB utilization at least for
amdgpu.
Instead of a completely braindead approach of filling the pool with one
CPU while another one is trying to shrink it we only give back freed
pages.
This also results in much less locking contention and a trylock free MM
shrinker callback, so we can guarantee that pages are given back to the
system when needed.
Downside of this is that it takes longer for many small allocations until
the pool is filled up. We could address this, but I couldn't find an use
case where this actually matters. We also don't bother freeing large
chunks of pages any more since the CPU overhead in that path isn't really
that important.
The sysfs files are replaced with a single module parameter, allowing
users to override how many pages should be globally pooled in TTM. This
unfortunately breaks the UAPI slightly, but as far as we know nobody ever
depended on this.
Zeroing memory coming from the pool was handled inconsistently. The
alloc_pages() based pool was zeroing it, the dma_alloc_attr() based one
wasn't. For now the new implementation isn't zeroing pages from the pool
either and only sets the __GFP_ZERO flag when necessary.
The implementation has only 768 lines of code compared to the over 2600
of the old one, and also allows for saving quite a bunch of code in the
drivers since we don't need specialized handling there any more based on
kernel config.
Additional to all of that there was a neat bug with IOMMU, coherent DMA
mappings and huge pages which is now fixed in the new code as well.
v2: make ttm_pool_apply_caching static as reported by the kernel bot, add
some more checks
v3: fix some more checkpatch.pl warnings
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Madhav Chauhan <madhav.chauhan@amd.com>
Tested-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/397080/?series=83051&rev=1
This patch fixes below warnings reported by coccicheck
./drivers/gpu/drm/i915/i915_debugfs.c:789:5-8: Unneeded variable: "ret". Return "0" on line 1012
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1603937925-53176-1-git-send-email-zou_wei@huawei.com
Clear out some pointers when objects have been de-allocated. This
makes it much easier to track down use-after-free type issues.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201028145826.2949180-4-John.C.Harrison@Intel.com
Rather than just saying 'GuC failed to load: -110', actually print out
the GuC status register and break it down into the individual fields.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201028145826.2949180-3-John.C.Harrison@Intel.com
The latest GuC firmware includes a number of interface changes that
require driver updates to match.
* Starting from Gen11, the ID to be provided to GuC needs to contain
the engine class in bits [0..2] and the instance in bits [3..6].
NOTE: this patch breaks pointer dereferences in some existing GuC
functions that use the guc_id to dereference arrays but these functions
are not used for now as we have GuC submission disabled and we will
update these functions in follow up patch which requires new IDs.
* The new GuC requires the additional data structure (ADS) and associated
'private_data' pointer to be setup. This is basically a scratch area
of memory that the GuC owns. The size is read from the CSS header.
* There is now a physical to logical engine mapping table in the ADS
which needs to be configured in order for the firmware to load. For
now, the table is initialised with a 1 to 1 mapping.
* GUC_CTL_CTXINFO has been removed from the initialization params.
* reg_state_buffer is maintained internally by the GuC as part of
the private data.
* The ADS layout has changed significantly. This patch updates the
shared structure and also adds better documentation of the layout.
* While i915 does not use GuC doorbells, the firmware now requires
that some initialisation is done.
* The number of engine classes and instances supported in the ADS has
been increased.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201028145826.2949180-2-John.C.Harrison@Intel.com
Most of the helpers to retrieve vc4 structures from the DRM base structures
rely on the fact that the first member of the vc4 structure is the DRM one
and just cast the pointers between them.
However, this is pretty fragile especially since there's no check to make
sure that the DRM structure is indeed at the offset 0 in the structure, so
let's use container_of to make it more robust.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201028123752.1733242-1-maxime@cerno.tech
Since the components for a given device in ASoC are identified by their
name, it makes sense to add one even though it's not strictly necessary.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708144555.718404-1-maxime@cerno.tech
Running "make htmldocs: produce lots of warnings on those files:
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:177: warning: Excess function parameter 'man' description in 'amdgpu_vram_mgr_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:177: warning: Excess function parameter 'p_size' description in 'amdgpu_vram_mgr_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:211: warning: Excess function parameter 'man' description in 'amdgpu_vram_mgr_fini'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:177: warning: Excess function parameter 'man' description in 'amdgpu_vram_mgr_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:177: warning: Excess function parameter 'p_size' description in 'amdgpu_vram_mgr_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:211: warning: Excess function parameter 'man' description in 'amdgpu_vram_mgr_fini'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:177: warning: Excess function parameter 'man' description in 'amdgpu_vram_mgr_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:177: warning: Excess function parameter 'p_size' description in 'amdgpu_vram_mgr_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:211: warning: Excess function parameter 'man' description in 'amdgpu_vram_mgr_fini'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:177: warning: Excess function parameter 'man' description in 'amdgpu_vram_mgr_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:177: warning: Excess function parameter 'p_size' description in 'amdgpu_vram_mgr_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:211: warning: Excess function parameter 'man' description in 'amdgpu_vram_mgr_fini'
./drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c:90: warning: Excess function parameter 'man' description in 'amdgpu_gtt_mgr_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c:90: warning: Excess function parameter 'p_size' description in 'amdgpu_gtt_mgr_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c:134: warning: Excess function parameter 'man' description in 'amdgpu_gtt_mgr_fini'
./drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c:90: warning: Excess function parameter 'man' description in 'amdgpu_gtt_mgr_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c:90: warning: Excess function parameter 'p_size' description in 'amdgpu_gtt_mgr_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c:134: warning: Excess function parameter 'man' description in 'amdgpu_gtt_mgr_fini'
./drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:675: warning: Excess function parameter 'dev' description in 'amdgpu_device_asic_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:675: warning: Excess function parameter 'dev' description in 'amdgpu_device_asic_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:675: warning: Excess function parameter 'dev' description in 'amdgpu_device_asic_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:675: warning: Excess function parameter 'dev' description in 'amdgpu_device_asic_init'
They're related to the repacement of some parameters by adev,
and due to a few renamed parameters.
While here, uniform the name of the parameter for it to be
the same on all functions using a pointer to struct amdgpu_device.
Update the kernel-doc documentation accordingly.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/5755c2b361890b8ae5cea0f61dfd70b1c135eefe.1603791716.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
When we forward an mmap to the dma_buf exporter, they get to own
everything. Unfortunately drm_gem_mmap_obj() overwrote
vma->vm_private_data after the driver callback, wreaking the
exporter complete. This was noticed because vb2_common_vm_close blew
up on mali gpu with panfrost after commit 26d3ac3cb0
("drm/shmem-helpers: Redirect mmap for imported dma-buf").
Unfortunately drm_gem_mmap_obj also acquires a surplus reference that
we need to drop in shmem helpers, which is a bit of a mislayer
situation. Maybe the entire dma_buf_mmap forwarding should be pulled
into core gem code.
Note that the only two other drivers which forward mmap in their own
code (etnaviv and exynos) get this somewhat right by overwriting the
gem mmap code. But they seem to still have the leak. This might be a
good excuse to move these drivers over to shmem helpers completely.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Russell King <linux+etnaviv@armlinux.org.uk>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Fixes: 26d3ac3cb0 ("drm/shmem-helpers: Redirect mmap for imported dma-buf")
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rob Herring <robh@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: <stable@vger.kernel.org> # v5.9+
Reported-and-tested-by: piotr.oniszczuk@gmail.com
Cc: piotr.oniszczuk@gmail.com
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201027214922.3566743-1-daniel.vetter@ffwll.ch
On bxt, we require a VT'd w/a to serialise all GGTT updates with memory
transfers, and use stop_machine() for this purpose. stop_machine() is a
global serialisation barrier and so dangerous to use from within
critical sections, as the stop_machine() will wait for all cpus to enter
the stop_machine callback, and those cpus may be waiting for the
critical section already held.
Fixes: d7085b0faa ("drm/i915/gem: Poison stolen pages before use")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201027184759.29888-1-chris@chris-wilson.co.uk
First check in the function is if swsci() is supported. All the error
paths are easy to figure out the reason, so remove the extra debug
message: it's normal not to support swsci() e.g. in dgfx.
v2: Rather than special case dgfx, just remove the debug message
(from Ville)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201027044618.719064-2-lucas.demarchi@intel.com
Do not create the display debugfs files when we don't have display.
Based on previous patch by José Souza.
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201027044618.719064-1-lucas.demarchi@intel.com
This is required for MALL. Was accidently removed in PSR update.
Fixes: 48e48e5984 ("drm/amd/display: Disable idle optimization when PSR is enabled")
Fixes: 52f2e83e2f ("drm/amdgpu/display: add MALL support (v2)")
Acked-by: Slava Abramov <slava.abramov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Create hwmon attribute for vddc, that uses previously declared get_current_vddc() callback if there's an implementation available.
Also hides vddc, if there is no implementation for the current chipset (as per Alexander Deucher's suggestion).
Signed-off-by: Sandeep Raghuraman <sandy.8925@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add implementation of get_current_vddc() callback for Sumo.
Signed-off-by: Sandeep Raghuraman <sandy.8925@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds a callback for reporting vddc, to the dpm field of the radeon_asic structure.
Signed-off-by: Sandeep Raghuraman <sandy.8925@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It has been confirmed that the SMU metrics table should always reflect
the current fan speed even in manual mode.
Fixes: f6eb433954 ("drm/amdgpu/swsmu: handle manual fan readback on SMU11")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When running the trigger hook, ALSA by default will take a spinlock, and
thus will run the trigger hook in atomic context.
However, our HDMI driver will send the infoframes as part of the trigger
hook, and part of that process is to wait for a bit to be cleared for up to
100ms. To be nicer to the system, that wait has some usleep_range that
interact poorly with the atomic context.
There's several ways we can fix this, but the more obvious one is to make
ALSA take a mutex instead by setting the nonatomic flag on the DAI link.
That doesn't work though, since now the cyclic callback installed by the
dmaengine helpers in ALSA will take a mutex, while that callback is run by
dmaengine's virt-chan code in a tasklet where sleeping is not allowed
either.
Given the delay we need to poll the bit for, changing the usleep_range for
a udelay and keep running it from a context where interrupts are disabled
is not really a good option either.
However, we can move the infoframe setup code in the hw_params hook, like
is usually done in other HDMI controllers, that isn't protected by a
spinlock and thus where we can sleep. Infoframes will be sent on a regular
basis anyway, and since hw_params is where the audio parameters that end up
in the infoframes are setup, this also makes a bit more sense.
Fixes: bb7d785688 ("drm/vc4: Add HDMI audio support")
Suggested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201027101558.427256-1-maxime@cerno.tech
The -Wmissing-field-initializer warning when building with W=2
turns into an error because tilcdc is built with -Werror:
drm/tilcdc/tilcdc_drv.c:431:33: error: missing field 'data' initializer [-Werror,-Wmissing-field-initializers] { "regs", tilcdc_regs_show, 0 },
drm/tilcdc/tilcdc_drv.c:432:33: error: missing field 'data' initializer [-Werror,-Wmissing-field-initializers] { "mm", tilcdc_mm_show, 0 },
Add the missing field initializers to address the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201026194110.3817470-1-arnd@kernel.org
It has been confirmed that the SMU metrics table should always reflect
the current fan speed even in manual mode.
Fixes: 3033e9f1c2de ("drm/amdgpu/swsmu: handle manual fan readback on SMU11")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix the wrong fan speed in fan1_input when the fan control mode is manual.
the fan speed value is not correct when we set manual mode to fan1_enalbe - 1.
since the fan speed in the metrics table always reflects the real fan speed,we
can fetch the fan speed for both auto and manual mode.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not used any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add vangogh apu flag to support more kickers that
belongs vangogh series.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With this, for multiple monitors in sync(e.g. with the same model),
mclk switching will be allowed. That helps saving some idle power on
some ASICs(e.g. Polaris).
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check chip family also to avoid wrong identification.
V2: use the correct macro without AMDGPU prefix
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As this is already performed in smu7_set_power_state_tasks().
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reconfigure smc display settings on vbitimeout change.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Correct the mclk switching setting for multiple displays.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable watermark table setting for Polaris.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fulfill Polaris get_clock_by_type_with_latency().
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Correct Polaris10 setup.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Correct Polaris10 pcie spc cap setting.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Populate the correct highest vddc setting on Polaris.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Correct Polaris10 smc voltage controller setup.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Correct powertune table setup for Polaris.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Correct sclk/mclk SS support checks.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add mc register table initialization.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable edc controller table setting.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only if the ZeroRPM feature is supported.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
By using the saved copy of ro_range_maximum and ro_range_minimum.
Correct the setting for "LdoRefSel".
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make the settings more precise.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
By moving that in atomfw_read_efuse().
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Programming AC Timing Parameters is only dependent on MCLK.
No need to nest loop for each SCLK DPM level.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of sharing the fan table setup with Tonga, Polaris has
its own fan table setup.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is for some special Polaris10 ASICs.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As this is not needed for polaris.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set the BootLinkLevel as the max level.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Correct the setting for "ActivityLevel".
V2: rich the comment
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Correct the settings for "StutterEnable" and "EnabledForActivity".
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make sure the settings are applied only when voltage
controlled by gpio.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
By defining new Macros.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As reported by "make htmldocs":
./drivers/gpu/drm/drm_prime.c:808: warning: Function parameter or member 'dev' not described in 'drm_prime_pages_to_sg'
Add a description for the new parameter.
Fixes: 707d561f77 ("drm: allow limiting the scatter list size.")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/9366f48e6e9c3ec2f31a3e68452a2b23a1089fce.1603791716.git.mchehab+huawei@kernel.org
The name of the argument is different, causing those warnings:
./drivers/gpu/drm/drm_edid.c:3754: warning: Function parameter or member 'video_code' not described in 'drm_display_mode_from_cea_vic'
./drivers/gpu/drm/drm_edid.c:3754: warning: Excess function parameter 'vic' description in 'drm_display_mode_from_cea_vic'
Fixes: 7af655bce2 ("drm/dp: Add drm_dp_downstream_mode()")
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/7f4d6c3ff6df63ebd006eb90a5108006c23e2168.1603791716.git.mchehab+huawei@kernel.org
As warned by kernel-doc:
./drivers/gpu/drm/drm_dp_helper.c:385: warning: Function parameter or member 'type' not described in 'drm_dp_downstream_is_type'
./drivers/gpu/drm/drm_dp_helper.c:886: warning: Function parameter or member 'dev' not described in 'drm_dp_downstream_mode'
Some function parameters weren't documented.
Fixes: 38784f6f88 ("drm/dp: Add helpers to identify downstream facing port types")
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/03c9c8ba3f492aca76e2b4836803219cd9c971cf.1603791716.git.mchehab+huawei@kernel.org
clang warns about functions returning a 'const int' result:
drivers/gpu/drm/imx/imx-tve.c:487:8: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
Remove the extraneous 'const' qualifier here. I would guess that the
function was intended to be marked __attribute__((const)) instead,
but that would also be wrong since it call other functions without
that attribute.
Fixes: fcbc51e54d ("staging: drm/imx: Add support for Television Encoder (TVEv2)")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The edid_len variable is never used again. Use a local variable instead
of storing it in the device structure.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Remove leftover container_of helper, it has been replaced by
bridge_to_imxpd().
Fixes: fe141cedc4 ("drm/imx: pd: Use bus format/flags provided by the bridge when available")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The edid memory is only freed if the component.unbind() is called. This
is okay if the parallel-display was bound but if the bind() fails we
leak the memory.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
[p.zabel@pengutronix.de: rebased, dropped now empty unbind()]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The edid_len variable is never used again. Use a local variable instead
of storing it in the device structure.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This patch simplifies the ASSERT*() and BREAK_TO_DEBUGGER() macros:
- Move the dependency check of CONFIG_KGDB into Kconfig
- Unify the kgdb_breakpoint() call
- Drop the non-existing CONFIG_HAVE_KGDB
Also align the behavior of ASSERT() macro in both cases with and
without CONFIG_DEBUG_KERNEL_DC.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ASSERT_CRITICAL() invokes kgdb_breakpoint() whenever either
CONFIG_KGDB or CONFIG_HAVE_KGDB is set. This, however, may lead to a
kernel panic when no kdb stuff is attached, since the
kgdb_breakpoint() call issues INT3. It's nothing but a surprise for
normal end-users.
For avoiding the pitfall, make the kgdb_breakpoint() call only when
CONFIG_DEBUG_KERNEL_DC is set.
https://bugzilla.opensuse.org/show_bug.cgi?id=1177973
Cc: <stable@vger.kernel.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently both error code paths handled in dal_gpio_open_ex() issues
ASSERT_CRITICAL(), and this leads to a kernel panic unnecessarily if
CONFIG_KGDB is enabled. Since basically both are non-critical errors
and can be recovered, drop those assert calls and use a safer one,
BREAK_TO_DEBUGGER(), for allowing the debugging, instead.
BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1177973
Cc: <stable@vger.kernel.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It looks this was accidently lost in a follow up patch.
dc context is large and we don't need contiguous pages.
Fixes: e4863f118a ("drm/amd/display: Multi display cause system lag on mode change")
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Aric Cyr <aric.cyr@amd.com>
Cc: Alex Xu <alex_y_xu@yahoo.ca>
Reported-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Tested-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Cc: stable@vger.kernel.org
why:
oem-related ddc read/write fails without these regs
how:
copy from hw_factory_dcn20.c
Signed-off-by: Martin Leung <martin.leung@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ideally this should be a multiple of the VM block size.
2MB should at least fit for Vega/Navi.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Madhav Chauhan <madhav.chauhan@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[why]
get_pixel_clk_frequency_100hz is undefined in clock_source_funcs.
[how]
set function pointer: ".get_pixel_clk_frequency_100hz = get_pixel_clk_frequency_100hz"
Signed-off-by: David Galiffi <David.Galiffi@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2MB area is reserved at top inside VM.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Madhav Chauhan <madhav.chauhan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The blockchain SKU has no display and video support, remove them.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch simplifies the ASSERT*() and BREAK_TO_DEBUGGER() macros:
- Move the dependency check of CONFIG_KGDB into Kconfig
- Unify the kgdb_breakpoint() call
- Drop the non-existing CONFIG_HAVE_KGDB
Also align the behavior of ASSERT() macro in both cases with and
without CONFIG_DEBUG_KERNEL_DC.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ASSERT_CRITICAL() invokes kgdb_breakpoint() whenever either
CONFIG_KGDB or CONFIG_HAVE_KGDB is set. This, however, may lead to a
kernel panic when no kdb stuff is attached, since the
kgdb_breakpoint() call issues INT3. It's nothing but a surprise for
normal end-users.
For avoiding the pitfall, make the kgdb_breakpoint() call only when
CONFIG_DEBUG_KERNEL_DC is set.
https://bugzilla.opensuse.org/show_bug.cgi?id=1177973
Cc: <stable@vger.kernel.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently both error code paths handled in dal_gpio_open_ex() issues
ASSERT_CRITICAL(), and this leads to a kernel panic unnecessarily if
CONFIG_KGDB is enabled. Since basically both are non-critical errors
and can be recovered, drop those assert calls and use a safer one,
BREAK_TO_DEBUGGER(), for allowing the debugging, instead.
BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1177973
Cc: <stable@vger.kernel.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bool initialisation should use 'true' and 'false' values instead of 0
and 1.
Modify amdgpu_amdkfd_gpuvm.c to initialise variable is_imported
to false instead of 0.
Issue found with Coccinelle.
Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The 'break' is unnecessary because of previous
'return', discard it.
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It looks this was accidently lost in a follow up patch.
dc context is large and we don't need contiguous pages.
Fixes: e4863f118a ("drm/amd/display: Multi display cause system lag on mode change")
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Aric Cyr <aric.cyr@amd.com>
Cc: Alex Xu <alex_y_xu@yahoo.ca>
Reported-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Tested-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
[Why]
For user regamma we're missing this function call
to combine user regamma + OS for GAMMA_CS_TFM_1D type.
[How]
Applied 1D LUT in the mod_color_build_user_regamma.
And Set the regamma dirty as updateGamma.
Signed-off-by: Derek Lai <Derek.Lai@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Some platform has a limitation of 2ms for udelay
[how]
Add 1ms udelay for specific dongle.
Signed-off-by: jinlong zhang <jinlong.zhang@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The clock state update is the source of many problems, and capturing
this sort of information helps debug. This commit introduces tracepoints
for capturing clock values and also add traces in DCE, DCN1, DCN2x, and
DCN3.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit introduces a trace mechanism for struct pipe_ctx by adding a
middle layer struct in the amdgpu_dm_trace.h for capturing the most
important data from struct pipe_ctx and showing its data via tracepoint.
This tracepoint was added to dc.c and dcn10_hw_sequencer, however, it
can be added to other DCN architecture.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Debug amdgpu_dm could be a complicated task, therefore, this commit adds
tracepoints in some convenient functions such as plane and connector
check inside amdgpu_dm.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_dc_rreg and amdgpu_dc_wreg are very similar, for this reason,
this commits abstract these two events by using DECLARE_EVENT_CLASS and
create an instance of it for each one of these events.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Our DC currently uses some of the tracepoint function inside a DC
header, which means that many other files implicitly include part of the
trace function. This situation limits how we can expand this feature for
other parts of the driver by generating multiple compilation errors when
we try to reuse some of the existing structures. This commit decouples
part of the amdgpu_dm_trace from DC core to simplify the trace
enlargement in future changes.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| [Header Changes]
| - Add new SCRATCH15 boot option and fw_state member to skip
| phy access
| - Add new SCRATCH15 boot option and fw_state member to disable
| clk gating
| - Add defines for AUX return status
| - Add defines for HPD events
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
why:
oem-related ddc read/write fails without these regs
how:
copy from hw_factory_dcn20.c
Signed-off-by: Martin Leung <martin.leung@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
It was detected in some Freesync HDR tests that displays were not
reaching their maximum nominal brightness.
[HOW]
The Multi-plane combiner (MPC) Output Gamma (OGAM) block builds a
discrete Lookup Table (LUT). When the display's maximum brightness
falls in between two values, having to be linearly interpolated by
the hardware, rounding issues might occur that will cause the
display to never reach its maximum brightness.
The fix involves doing the calculations backwards, ensuring that
the interpolation in the maximum brightness values translates to an
output of 1.0.
Signed-off-by: Felipe Clark <felclark@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When ODM combine is in use we trigger multiple update events causing
issues with variable refresh rate.
[How]
Only trigger on a single ODM instance.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We should leave GSL if we're not doing immediate flip no matter if
we're doing pipe split or not
[How]
Check for updating GSL state whenever we're not doing
immediate flip
v2: Squash in build fix (Alex)
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
VBIOS will not enable VSC_SDP during pre-OS to lead
MISC1[6] wasn't matched with driver.
[HOW]
disabled seamless boot if sink supports VSC_SDP
Signed-off-by: Yu-Ting Shen <Yu-ting.Shen@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
right side visual confirm is too thick due to it is 4 times of
left side (16 lines).
[How]
Change factor from 4 to 2.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For some monitors,
they can't display under BIOS with avmute enabled.
[How]
Add monitor patch for skip avmute action.
Signed-off-by: Brandon Syu <Brandon.Syu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
All DCN3x resources share ABM_MASK_SH_LIST_DCN301 definition.
The naming is misleading since it looks like DCN30 code
depends on next version DCN301, which in fact is vice-versa.
[How]
Refactor the naming to ABM_MASK_SH_LIST_DCN30.
v2: squash in build fixes (Alex)
Signed-off-by: Roman Li <roman.li@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
why:
missing OEM data to control graphics card functions
how:
load it into init_data. copied over from dcn2 implementation.
copied destruction sequence as well.
Signed-off-by: Martin Leung <martin.leung@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Currently disable 48mhz debug option only disables on boot.
Need to put option check in update_clocks as well to make it
affect more areas.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why] Can be used for debug purposes
[How] Add max target bpp override field and related handling
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
So we can track VSC SDP errors from display
[how]
Define the bit, and use it in driver logic
Signed-off-by: Reza Amini <Reza.Amini@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Underflow counter increases in AGM when performing some mode switches due
to timing sync, which is a known hardware issue.
[How]
Temporarily raise DPG height during timing sync so that underflow is not
reported.
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If full pstate is not supported, we should set WM set A
to 0 to prevent any hangs
[How]
If pstate is not supported, set watermark set A to 0
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some sink devices wish to have access to the minimum
HBlank supported by the ASIC.
[How]
Make the ASIC minimum HBlank available in Source
Device information address 0x340.
Signed-off-by: Ashley Thomas <Ashley.Thomas2@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Enable ODM Combine + Fullscreen MPO on DCN2.1
For lower power consumption in video use cases.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Sung Lee <sung.lee@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Create a separate dcn21_fast_validate_bw function for dcn21.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
DF PState and Voltage State are coupled such that one cannot be
raised without raising the other. This uses more power than
is necessary in high bandwidth scenarios.
[HOW]
Add logic to create a new bounding box state that allows for
DF PState to be low while Voltage State is high. Watermarks
vlevel calculation logic was also udpated to assume
state 1 contains the new optimized state.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Merge the functionality mostly into amdgpu_vm_bo_update_mapping.
This way we can even handle small contiguous system pages without
to much extra CPU overhead.
v2: fix typo, keep the cursor as it is for now
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Madhav Chauhan <madhav.chauhan@amd.com> (v1)
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ideally this should be a multiple of the VM block size.
2MB should at least fit for Vega/Navi.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Madhav Chauhan <madhav.chauhan@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Per PMFW 59.9.0.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
loaded fw can be queried from sys fs interface
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It makes no difference to kmalloc if the structure
is 48 or 64 bytes in size.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/396950/
We can still allocate 16TiB with that.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/396946/
This is not related to allocating the backing store in any way.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/396947/
Neither page allocation backend nor the driver should mess with that.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Madhav Chauhan <madhav.chauhan@amd.com>
Link: https://patchwork.freedesktop.org/patch/396948/
Originally this error path used to leak "bin" but then we accidentally
applied two separate commits to fix it and ended up with a double free.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201026094905.GA1634423@mwanda
When using the scaler on the A10-like frontend with single-planar formats,
the current code will setup the channel 0 filter (used for the R or Y
component) with a different phase parameter than the channel 1 filter (used
for the G/B or U/V components).
This creates a bleed out that keeps repeating on of the last line of the
RGB plane across the rest of the display. The Allwinner BSP either applies
the same phase parameter over both channels or use a separate one, the
condition being whether the input format is YUV420 or not.
Since YUV420 is both subsampled and multi-planar, and since YUYV is
subsampled but single-planar, we can rule out the subsampling and assume
that the condition is actually whether the format is single or
multi-planar. And it looks like applying the same phase parameter over both
channels for single-planar formats fixes our issue, while we keep the
multi-planar formats working properly.
Reported-by: Taras Galchenko <tpgalchenko@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20201015093642.261440-2-maxime@cerno.tech
The scaler filter phase setup in the allwinner kernel has two different
cases for setting up the scaler filter, the first one using different phase
parameters for the two channels, and the second one reusing the first
channel parameters on the second channel.
The allwinner kernel has a third option where the horizontal phase of the
second channel will be set to a different value than the vertical one (and
seems like it's the same value than one used on the first channel).
However, that code path seems to never be taken, so we can ignore it for
now, and it's essentially what we're doing so far as well.
Since we will have always the same values across each components of the
filter setup for a given channel, we can simplify a bit our frontend
structure by only storing the phase value we want to apply to a given
channel.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20201015093642.261440-1-maxime@cerno.tech
We have a few leftovers from the merge window period in
drm-misc-next-fixes, let's bring them into drm-misc-fixes
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
This has not been required since commit 75229eca56 ("drm: Make
drm_encoder_helper_funcs optional").
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Use drmm_mode_config_init() and drop the explicit calls to
drm_mode_config_cleanup().
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This is the same code and comment that is already shared by imx-ldb,
imx-tve, and parallel-display in imx_drm_encoder_parse_of().
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
ipu_mbus_code_to_colorspace, ipu_stride_to_bytes, and
ipu_pixelformat_is_planar are unused. Remove them.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Various driver updates for platforms. A bulk of this is smaller fixes or
cleanups, but some of the new material this time around is:
- Support for Nvidia Tegra234 SoC
- Ring accelerator support for TI AM65x
- PRUSS driver for TI platforms
- Renesas support for R-Car V3U SoC
- Reset support for Cortex-M4 processor on i.MX8MQ
There are also new socinfo entries for a handful of different SoCs
and platforms.
-----BEGIN PGP SIGNATURE-----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=tfPb
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC-related driver updates from Olof Johansson:
"Various driver updates for platforms. A bulk of this is smaller fixes
or cleanups, but some of the new material this time around is:
- Support for Nvidia Tegra234 SoC
- Ring accelerator support for TI AM65x
- PRUSS driver for TI platforms
- Renesas support for R-Car V3U SoC
- Reset support for Cortex-M4 processor on i.MX8MQ
There are also new socinfo entries for a handful of different SoCs and
platforms"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (131 commits)
drm/mediatek: reduce clear event
soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api
soc: mediatek: cmdq: add jump function
soc: mediatek: cmdq: add write_s_mask value function
soc: mediatek: cmdq: add write_s value function
soc: mediatek: cmdq: add read_s function
soc: mediatek: cmdq: add write_s_mask function
soc: mediatek: cmdq: add write_s function
soc: mediatek: cmdq: add address shift in jump
soc: mediatek: mtk-infracfg: Fix kerneldoc
soc: amlogic: pm-domains: use always-on flag
reset: sti: reset-syscfg: fix struct description warnings
reset: imx7: add the cm4 reset for i.MX8MQ
dt-bindings: reset: imx8mq: add m4 reset
reset: Fix and extend kerneldoc
reset: reset-zynqmp: Added support for Versal platform
dt-bindings: reset: Updated binding for Versal reset driver
reset: imx7: Support module build
soc: fsl: qe: Remove unnessesary check in ucc_set_tdm_rxtx_clk
soc: fsl: qman: convert to use be32_add_cpu()
...
HPD pins are inverted for DG1 platform.
Bspec: 49956
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Clinton A Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201021082034.3170478-3-lucas.demarchi@intel.com
DG1 has one more combo phy port, no TC and all irq handling goes through
SDE, like for MCC.
v2: Also change intel_hpd_pin_default() to include DG1 mapping
v3, v4: Rebase on hpd refactor
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201021082034.3170478-2-lucas.demarchi@intel.com
Writes to CURSURFLIVE in TGL are causing IOMMU errors and visual
glitches that are often reproduced when executing CPU intensive
workloads while a eDP 4K panel is attached.
Manually exiting PSR causes the frontbuffer to be updated without
glitches and the IOMMU errors are also gone but this comes at the cost
of less time with PSR active.
So using this workaround until this issue is root caused and a better
fix is found.
The current code is already ready to enable PSR after this exit if
there is not other frontbuffer modifications.
Adding a new if block in psr_force_hw_tracking_exit() instead of reuse
the else/gen8- block because the plan is to revert this workaround
as soon as a better solution is found.
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Tested-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201002231627.24528-1-jose.souza@intel.com
fbcon/fonts:
- Two patches to prevent OOB access
ttm:
- fix for evicition value range check
amdgpu:
- Sienna Cichlid fixes
- MST manager resource leak fix
- GPU reset fix
amdkfd:
- Luxmark fix for Navi1x
i915:
- Tweak initial DPCD backlight.enabled value (Sean)
- Initialize reserved MOCS indices (Ayaz)
- Mark initial fb obj as WT on eLLC machines to avoid rcu lockup (Ville)
- Support parsing of oversize batches (Chris)
- Delay execlists processing for TGL (Chris)
- Use the active reference on the vma during error capture (Chris)
- Widen CSB pointer (Chris)
- Wait for CSB entries on TGL (Chris)
- Fix unwind for scratch page allocation (Chris)
- Exclude low patches of stolen memory (Chris)
- Force VT'd workarounds when running as a guest OS (Chris)
- Drop runtime-pm assert from vpgu io accessors (Chris)
-----BEGIN PGP SIGNATURE-----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=rAUM
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2020-10-23' of git://anongit.freedesktop.org/drm/drm
Pull more drm fixes from Dave Airlie:
"This should be the last round of things for rc1, a bunch of i915
fixes, some amdgpu, more font OOB fixes and one ttm fix just found
reading code:
fbcon/fonts:
- Two patches to prevent OOB access
ttm:
- fix for evicition value range check
amdgpu:
- Sienna Cichlid fixes
- MST manager resource leak fix
- GPU reset fix
amdkfd:
- Luxmark fix for Navi1x
i915:
- Tweak initial DPCD backlight.enabled value (Sean)
- Initialize reserved MOCS indices (Ayaz)
- Mark initial fb obj as WT on eLLC machines to avoid rcu lockup (Ville)
- Support parsing of oversize batches (Chris)
- Delay execlists processing for TGL (Chris)
- Use the active reference on the vma during error capture (Chris)
- Widen CSB pointer (Chris)
- Wait for CSB entries on TGL (Chris)
- Fix unwind for scratch page allocation (Chris)
- Exclude low patches of stolen memory (Chris)
- Force VT'd workarounds when running as a guest OS (Chris)
- Drop runtime-pm assert from vpgu io accessors (Chris)"
* tag 'drm-next-2020-10-23' of git://anongit.freedesktop.org/drm/drm: (31 commits)
drm/amdgpu: correct the cu and rb info for sienna cichlid
drm/amd/pm: remove the average clock value in sysfs
drm/amd/pm: fix pp_dpm_fclk
Revert drm/amdgpu: disable sienna chichlid UMC RAS
drm/amd/pm: fix pcie information for sienna cichlid
drm/amdkfd: Use same SQ prefetch setting as amdgpu
drm/amd/swsmu: correct wrong feature bit mapping
drm/amd/psp: Fix sysfs: cannot create duplicate filename
drm/amd/display: Avoid MST manager resource leak.
drm/amd/display: Revert "drm/amd/display: Fix a list corruption"
drm/amdgpu: update golden setting for sienna_cichlid
drm/amd/swsmu: add missing feature map for sienna_cichlid
drm/amdgpu: correct the gpu reset handling for job != NULL case
drm/amdgpu: add rlc iram and dram firmware support
drm/amdgpu: add function to program pbb mode for sienna cichlid
drm/i915: Drop runtime-pm assert from vgpu io accessors
drm/i915: Force VT'd workarounds when running as a guest OS
drm/i915: Exclude low pages (128KiB) of stolen from use
drm/i915/gt: Onion unwind for scratch page allocation failure
drm/ttm: fix eviction valuable range check.
...
[why]
get_pixel_clk_frequency_100hz is undefined in clock_source_funcs.
[how]
set function pointer: ".get_pixel_clk_frequency_100hz = get_pixel_clk_frequency_100hz"
Signed-off-by: David Galiffi <David.Galiffi@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Size is page count here.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dm_comressor_info -> dm_compressor_info
The kernel-doc markup is right, but the struct itself
and their references contain a typo.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some functions have different names between their prototypes
and the kernel-doc markup.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A kernel-doc markup can't be mixed with a random comment,
as it causes parsing problems.
While here, change an invalid kernel-doc markup into
a common comment.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Workaround to fix the soft hang observed in certain compute
applications.
Acked-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2MB area is reserved at top inside VM.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Madhav Chauhan <madhav.chauhan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable Memory Access at Last Level (MALL) feature for display.
v2: squash in 64 bit division fixes
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable Memory Access at Last Level (MALL) feature for sienna_cichlid.
v2: drop module option. We need to add UAPI so userspace can
request MALL per buffer.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A break is not needed if it is preceded by a return or break
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The blockchain SKU has no display and video support, remove them.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Skip disabled sa to correct the cu_info and active_rbs for sienna cichlid.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
if it's fine-grained clock dpm, remove the average clock value and
reflects the real clock.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
intel_timeline_read_hwsp() is used to support semaphore waits between
engines, that may themselves be deferred for arbitrary periods -- that
is the read of the target request's HWSP is at an indeterminant point in
the future. To support this, we need to prevent overwriting a HWSP that
is being watched across a seqno wrap (otherwise the next request will
write its value into the old HWSP preventing the watcher from making
progress, ad infinitum.) To simulate the observer across a wrap, let's
create a request that reads from the HWSP and dispatch it at different
points around a wrap to see if the value is lost.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201021220411.5777-2-chris@chris-wilson.co.uk
We wrap the timeline on construction of the next request, but there may
still be requests in flight that have not yet finalized the breadcrumb.
(The breadcrumb is delayed as we need engine-local offsets, and for the
virtual engine that is not known until execution.) As such, by the time
we write to the timeline's HWSP offset it may have changed, and we
should use the value we preserved in the request instead.
Though the window is small and infrequent (at full flow we can expect a
timeline's seqno to wrap once every 30 minutes), the impact of writing
the old seqno into the new HWSP is severe: the old requests are never
completed, and the new requests are completed before they are even
submitted.
Fixes: ebece75392 ("drm/i915: Keep timeline HWSP allocated until idle across the system")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.2+
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201022064127.10159-1-chris@chris-wilson.co.uk
Since Ironlake uses intel_ips.ko for its dynamic frequency adjustment,
we do not have direct control over the frequency management so such
tests are defunct. Similarly, we can't check the gen6+ RPS registers on
Ironlake.
Hopefully this catches all the invalid tests now that Ironlake has
rejoined the dynamic GPU frequency club. There is an opportunity for the
reader to add tests to exercise MEMINTRSTS and co.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201022210814.23004-1-chris@chris-wilson.co.uk
The mantix panel needs two reset lines (RESX and TP_RSTN) deasserted to
output an image. Only deasserting RESX is not enough and the display
will stay blank. Deassert in prepare() and assert in unprepare() to keep
device held in reset when off.
Fixes: 72967d5616 ("drm/panel: Add panel driver for the Mantix MLAF057WE51-X DSI panel")
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/ba71a8ab010d263a8058dd4f711e3bcd95877bf2.1602584953.git.agx@sigxcpu.org
- Initialize reserved MOCS indices (Ayaz)
- Mark initial fb obj as WT on eLLC machines to avoid rcu lockup (Ville)
- Support parsing of oversize batches (Chris)
- Delay execlists processing for TGL (Chris)
- Use the active reference on the vma during error capture (Chris)
- Widen CSB pointer (Chris)
- Wait for CSB entries on TGL (Chris)
- Fix unwind for scratch page allocation (Chris)
- Exclude low patches of stolen memory (Chris)
- Force VT'd workarounds when running as a guest OS (Chris)
- Drop runtime-pm assert from vpgu io accessors (Chris)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAl+R8a4ACgkQ+mJfZA7r
E8oazwgAu+NP5GlIHTcG6bV4vxRaEDdlDf3uH+ENOGfRT0PoX6qVNpkdc/nmTZC/
RFzHVsKJi1zXS9XetP33YKZ7KFPZxJMXdhGSu+f08Q6nf0jBdFUm3mhnrDWoLO9+
fS88L4HqXREvBLDctN89akuZ1/pZ3p0KsBqAOuP+LjRAsquHgIP3eUzwZMVbTgTZ
KLojKMHHrZxRtynMFrW6JO+gBok+mGydpOp7F1bK4jSmOIlYA5OsIW3xn9+Ytveu
9Od/yIjKeCyPD64ncz8wcbcPxZhnXENzZElBYT6sQSHDZ9wNCOUhfJT0v8t8G5So
vzOvf2YXa+2IKiGY2sd2ov9svz3Wgg==
=oidT
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-fixes-2020-10-22' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Tweak initia DPCD backlight.enabled value (Sean)
- Initialize reserved MOCS indices (Ayaz)
- Mark initial fb obj as WT on eLLC machines to avoid rcu lockup (Ville)
- Support parsing of oversize batches (Chris)
- Delay execlists processing for TGL (Chris)
- Use the active reference on the vma during error capture (Chris)
- Widen CSB pointer (Chris)
- Wait for CSB entries on TGL (Chris)
- Fix unwind for scratch page allocation (Chris)
- Exclude low patches of stolen memory (Chris)
- Force VT'd workarounds when running as a guest OS (Chris)
- Drop runtime-pm assert from vpgu io accessors (Chris)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201022205613.GA3469192@intel.com
As we disable the interrupt during suspend, also reset the irq_mask to
short-circuit subsystems that later try to turn off their interrupt
source.
<4>[ 101.816730] i915 0000:00:02.0: drm_WARN_ON(!intel_irqs_enabled(dev_priv))
<4>[ 101.816853] WARNING: CPU: 3 PID: 4241 at drivers/gpu/drm/i915/i915_irq.c:343 ilk_update_display_irq+0xb3/0x130 [i915]
v2: Reset irq_mask for i8xx_irq_reset as well, and split patch to focus
on only i915->irq_mask
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201022114246.28566-1-chris@chris-wilson.co.uk
If the DSI driver is the last to probe, component_add will try to run all
the bind callbacks straight away and return the error code.
However, since we depend on a power domain, we're pretty much guaranteed to
be in that case on the BCM2711, and are just lucky on the previous SoCs
since the v3d also depends on that power domain and is further in the probe
order.
In that case, the DSI host will not stick around in the system: the DSI
bind callback will be executed, will not find any DSI device attached and
will return EPROBE_DEFER, and we will then remove the DSI host and ask to
be probed later on.
But since that host doesn't stick around, DSI devices like the RaspberryPi
touchscreen whose probe is not linked to the DSI host (unlike the usual DSI
devices that will be probed through the call to mipi_dsi_host_register)
cannot attach to the DSI host, and we thus end up in a situation where the
DSI host cannot probe because the panel hasn't probed yet, and the panel
cannot probe because the DSI host hasn't yet.
In order to break this cycle, let's wait until there's a DSI device that
attaches to the DSI host to register the component and allow to progress
further.
Acked-by: Eric Anholt <eric@anholt.net>
Suggested-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200707101912.571531-1-maxime@cerno.tech
User-space should avoid parsing EDIDs for metadata already exposed via
other KMS interfaces and properties. For instance, user-space should not
try to extract a list of modes from the EDID: the kernel might mutate
the mode list (because of link capabilities or quirks for instance).
Other metadata not exposed by KMS can be parsed by user-space. This
includes for instance monitor identification (make/model/serial) and
supported color-spaces.
v2: add short explanation why user-space shouldn't do this (Brian)
Signed-off-by: Simon Ser <contact@emersion.fr>
Suggested-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/V_APW3gKRhljvcmT28tGV3JkP7qW9Z7h45I-s2wiJvYhaaveCpYpg3tztZPsZVV2KV1NC7rUx08IUUgCJXzdRrWCsEGB0czq4ZozpdyVFLs=@emersion.fr
Since we keep a driver global mask of online CPUs and base the decision
whether PMU needs to be migrated upon it, we need to make sure the
migration is done for all registered PMUs (so GPUs).
To do this we need to track the current CPU for each PMU and base the
decision on whether to migrate on a comparison between global and local
state.
At the same time, since dynamic CPU hotplug notification slots are a
scarce resource and given how we already register the multi instance type
state, we can and should add multiple instance of the i915 PMU to this
same state and not allocate a new one for every GPU.
v2:
* Use pr_notice. (Chris)
v3:
* Handle a nasty interaction where unregistration which triggers a false
CPU offline event. (Chris)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Daniel Vetter <daniel.vetter@intel.com> # dynamic slot optimisation
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201020161144.678668-1-tvrtko.ursulin@linux.intel.com
Mark the device as closed and keep references to driver data alive to
allow for safe driver unbind with active PMU clients. Perf core does not
otherwise handle this case so we have to do it manually like this.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201020100822.543332-1-tvrtko.ursulin@linux.intel.com
Avoid skipping what appears to be a no-op set-domain-ioctl if the cache
coherency state is inconsistent with our target domain. This also has
the utility of using the population of the pages to validate the backing
store.
The danger in skipping the first set-domain is leaving the cache
inconsistent and submitting stale data, or worse leaving the clean data
in the cache and not flushing it to the GPU. The impact should be small
as it requires a no-op set-domain as the very first ioctl in a
particular sequence not found in typical userspace.
Reported-by: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com>
Fixes: 754a254427 ("drm/i915: Skip object locking around a no-op set-domain ioctl")
Testcase: igt/gem_mmap_offset/blt-coherency
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com>
Cc: <stable@vger.kernel.org> # v5.2+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201019203825.10966-1-chris@chris-wilson.co.uk
Skip disabled sa to correct the cu_info and active_rbs for sienna cichlid.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.9.x
if it's fine-grained clock dpm, remove the average clock value and
reflects the real clock.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fclk value is missing in pp_dpm_fclk. add this to correctly show the current value.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.9.x
Fix the function used for sienna cichlid to get correct PCIE information
by pp_dpm_pcie.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.9.x
0 causes instruction fetch stall at cache line boundary under some
conditions on Navi10. A non-zero prefetch is the preferred default
in any case.
Fixes soft hang in Luxmark.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The move notify callback is only used in one place, this should
be removed in the future, but for now just rename it to the use
case which is to notify the driver that the GPU memory is to be
deleted.
Drivers can be cleaned up after this separately.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201021044031.1752624-2-airlied@gmail.com
1. when smc feature bit isn't mapped,
the feature state isn't showed on sysfs node of pp_features.
2. add pp_features table title
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
psp sysfs not cleaned up on driver unload for sienna_cichlid
Fixes: ce87c98db4 ("drm/amdgpu: Include sienna_cichlid in USBC PD FW support.")
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.9.x
On connector destruction call drm_dp_mst_topology_mgr_destroy
to release resources allocated in drm_dp_mst_topology_mgr_init.
Do it only if MST manager was initilized before otherwsie a crash
is seen on driver unload/device unplug.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
it will cause smu sysfs node of "pp_features" show error.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.9.x
Current code wrongly treat all cases as job == NULL.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-and-tested-by: Jane Jian <Jane.Jian@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Support to load RLC iram and dram ucode when RLC firmware struct use v2.2
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add function for sienna_cichlid to force PBB workload mode to zero by
checking whether there have SE been harvested.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.9.x
The block comment for cnl_program_nearest_filter_coefs() has a wonderful
diagram, but although it is marked up as kerneldoc does not use the
markup for providing the function definition.
drivers/gpu/drm/i915/display/intel_display.c:6341: warning: Function parameter or member 'dev_priv' not described in 'cnl_program_nearest_filter_coefs'
drivers/gpu/drm/i915/display/intel_display.c:6341: warning: Function parameter or member 'pipe' not described in 'cnl_program_nearest_filter_coefs'
drivers/gpu/drm/i915/display/intel_display.c:6341: warning: Function parameter or member 'id' not described in 'cnl_program_nearest_filter_coefs'
drivers/gpu/drm/i915/display/intel_display.c:6341: warning: Function parameter or member 'set' not described in 'cnl_program_nearest_filter_coefs'
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201021185649.17759-1-chris@chris-wilson.co.uk
Let's unmask the PCU event irq _after_ we've set up the
hardware and software to deal with the fallout. We can
also drop the PCU event bit from DEIER except when we
need it for rps.
And on the disable side we replace the hand rolled (and
unlocked) DEIER/IIR/IMR frobbing with ilk_disable_display_irq().
Ocd does require me to reorder it to be symmetric with
the enable path however.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201021131443.25616-5-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
There is no GEN6_RPSTAT1 on ILK. Instead of reading that let's
try to get the same information from MEMSTAT_ILK. At least it
seems to track MEMSWCTL frequency request perfectly on my ILK.
It needs the same invert trick as the request value.
We don't want to put the invert thing into intel_gpu_freq()
and intel_freq_opcode() because that would incorrectly invert
the min/max/etc frequencies also.
One day someone might want to reverse engineer the formula for
converting these numbers to Hz, but for now we'll just report
them raw.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201021131443.25616-2-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Running "make htmldocs: produce lots of warnings on those files:
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:177: warning: Excess function parameter 'man' description in 'amdgpu_vram_mgr_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:177: warning: Excess function parameter 'p_size' description in 'amdgpu_vram_mgr_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:211: warning: Excess function parameter 'man' description in 'amdgpu_vram_mgr_fini'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:177: warning: Excess function parameter 'man' description in 'amdgpu_vram_mgr_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:177: warning: Excess function parameter 'p_size' description in 'amdgpu_vram_mgr_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:211: warning: Excess function parameter 'man' description in 'amdgpu_vram_mgr_fini'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:177: warning: Excess function parameter 'man' description in 'amdgpu_vram_mgr_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:177: warning: Excess function parameter 'p_size' description in 'amdgpu_vram_mgr_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:211: warning: Excess function parameter 'man' description in 'amdgpu_vram_mgr_fini'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:177: warning: Excess function parameter 'man' description in 'amdgpu_vram_mgr_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:177: warning: Excess function parameter 'p_size' description in 'amdgpu_vram_mgr_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:211: warning: Excess function parameter 'man' description in 'amdgpu_vram_mgr_fini'
./drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c:90: warning: Excess function parameter 'man' description in 'amdgpu_gtt_mgr_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c:90: warning: Excess function parameter 'p_size' description in 'amdgpu_gtt_mgr_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c:134: warning: Excess function parameter 'man' description in 'amdgpu_gtt_mgr_fini'
./drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c:90: warning: Excess function parameter 'man' description in 'amdgpu_gtt_mgr_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c:90: warning: Excess function parameter 'p_size' description in 'amdgpu_gtt_mgr_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c:134: warning: Excess function parameter 'man' description in 'amdgpu_gtt_mgr_fini'
./drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:675: warning: Excess function parameter 'dev' description in 'amdgpu_device_asic_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:675: warning: Excess function parameter 'dev' description in 'amdgpu_device_asic_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:675: warning: Excess function parameter 'dev' description in 'amdgpu_device_asic_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:675: warning: Excess function parameter 'dev' description in 'amdgpu_device_asic_init'
They're related to the repacement of some parameters by adev,
and due to a few renamed parameters.
While here, uniform the name of the parameter for it to be
the same on all functions using a pointer to struct amdgpu_device.
Update the kernel-doc documentation accordingly.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Return statements for functions returning bool should use truth
and false instead of 1 and 0 respectively.
Modify cik_event_interrupt.c to return false instead of 0.
Issue found with Coccinelle.
Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Screen corruption on Navi10 card
[How]
Set system context in DCN only on Renoir
Tested-by: Matt Coffin <mcoffin13@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fclk value is missing in pp_dpm_fclk. add this to correctly show the current value.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix the wrong fan speed in fan1_input when the fan control mode is manual.
the fan speed value is not correct when we set manual mode to fan1_enalbe - 1.
since the fan speed in the metrics table always reflects the real fan speed,we
can fetch the fan speed for both auto and manual mode.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As far a I can tell uses a variant of DCN3xx which uses num_pkrs.
If we do not initialize the variable we will set the register field
to ilog2(0) = -1, though the mask will reduce that to 7. Pretty sure
7 is not the value we want here.
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-and-Tested-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the function used for sienna cichlid to get correct PCIE information
by pp_dpm_pcie.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sienna Cichlid and newer have a hw fix so no longer require
the workaround.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
set noretry default value to 1 for
sienna_cichlid/navy_founder/dimgrey_cavefish.
Signed-off-by: Chengming Gui <Jack.Gui@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable VCN 3.0 PG and CG for Vangogh by setting up flags.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
0 causes instruction fetch stall at cache line boundary under some
conditions on Navi10. A non-zero prefetch is the preferred default
in any case.
Fixes soft hang in Luxmark.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. when smc feature bit isn't mapped,
the feature state isn't showed on sysfs node of pp_features.
2. add pp_features table title
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
because i2c is unstable in GPU reset, driver need protect
eeprom update from GPU reset, to not miss any bad page record.
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Restore RPS for ILK-M. We lost it when an extra HAS_RPS()
check appeared in intel_rps_enable().
Unfortunaltey this just makes the performance worse on my
ILK because intel_ips insists on limiting the GPU freq to
the minimum. If we don't do the RPS init then intel_ips will
not limit the frequency for whatever reason. Either it can't
get at some required information and thus makes wrong decisions,
or we mess up some weights/etc. and cause it to make the wrong
decisions when RPS init has been done, or the entire thing is
just wrong. Would require a bunch of reverse engineering to
figure out what's going on.
Cc: stable@vger.kernel.org
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: 9c878557b1 ("drm/i915/gt: Use the RPM config register to determine clk frequencies")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201021131443.25616-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
We are incorrectly limiting the max allocation size as per the mm
max_order, which is effectively the largest power-of-two that we can fit
in the region size. However, it's normal to setup the region or
allocator with a non-power-of-two size(for example 3G), which we should
already handle correctly, except it seems for the early too-big-check.
v2: make sure we also exercise the I915_BO_ALLOC_CONTIGUOUS path, which
is quite different, since for that we are actually limited by the
largest power-of-two that we can fit within the region size. (Chris)
Fixes: b908be543e ("drm/i915: support creating LMEM objects")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: CQ Tang <cq.tang@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201021103606.241395-1-matthew.auld@intel.com
In order to test how fast the heartbeat can respond, we measure with the
interval set to its minimum. Before we measure though, we want to be
sure we start with a fresh pulse, and so wait until any old one is
complete. During that wait though, we were continually flushing the
work, and so continually re-evaluating to see if the pulse was complete,
and each attempt would count as an unresponsive system. If the engine
did not complete the request in the couple of busy-spins, it would flag
an error. This is unfortunate, so let's not busy-spin waiting for the
old heartbeat, but terminate it and start afresh.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201019142841.32273-1-chris@chris-wilson.co.uk
The "mmio" writes into vgpu registers are simple memory traps from the
guest into the host. We do not need to assert in the guest that the
device is awake for the io as we do not write to the device itself.
However, over time we have refactored all the mmio accessors with the
result that the vgpu reuses the gen2 accessors and so inherits the
assert for runtime-pm of the native device. The assert though has
actually been there since commit 3be0bf5acc ("drm/i915: Create vGPU
specific MMIO operations to reduce traps").
References: 3be0bf5acc ("drm/i915: Create vGPU specific MMIO operations to reduce traps")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Yan Zhao <yan.y.zhao@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200811092532.13753-1-chris@chris-wilson.co.uk
(cherry picked from commit 0e65ce24a3)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
If i915.ko is being used as a passthrough device, it does not know if
the host is using intel_iommu. Mixing the iommu and gfx causes a few
issues (such as scanout overfetch) which we need to workaround inside
the driver, so if we detect we are running under a hypervisor, also
assume the device access is being virtualised.
Reported-by: Stefan Fritsch <sf@sfritsch.de>
Suggested-by: Stefan Fritsch <sf@sfritsch.de>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Stefan Fritsch <sf@sfritsch.de>
Cc: stable@vger.kernel.org
Tested-by: Stefan Fritsch <sf@sfritsch.de>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201019101523.4145-1-chris@chris-wilson.co.uk
(cherry picked from commit f566fdcd6c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The GPU is trashing the low pages of its reserved memory upon reset. If
we are using this memory for ringbuffers, then we will dutiful resubmit
the trashed rings after the reset causing further resets, and worse. We
must exclude this range from our own use. The value of 128KiB was found
by empirical measurement (and verified now with a selftest) on gen9.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201019165005.18128-2-chris@chris-wilson.co.uk
(cherry picked from commit d3606757e6)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
In switching to using objects for our ppGTT scratch pages, care was not
taken to avoid trying to unref NULL objects on failure. And for gen6
ppGTT, it appears we forgot entirely to unwind after a partial allocation
failure.
Fixes: 89351925a4 ("drm/i915/gt: Switch to object allocations for page directories")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201019083444.1286-1-chris@chris-wilson.co.uk
(cherry picked from commit fa812ce96a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
GEN >= 10 hardware supports the programmable scaler filter.
Attach scaling filter property for CRTC and plane for GEN >= 10
hardwares and program scaler filter based on the selected filter
type.
changes since v3:
* None
changes since v2:
* Use updated functions
* Add ps_ctrl var to contain the full PS_CTRL register value (Ville)
* Duplicate the scaling filter in crtc and plane hw state (Ville)
changes since v1:
* None
Changes since RFC:
* Enable properties for GEN >= 10 platforms (Ville)
* Do not round off the crtc co-ordinate (Danial Stone, Ville)
* Add new functions to handle scaling filter setup (Ville)
* Remove coefficient set 0 hardcoding.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201020161427.6941-5-pankaj.laxminarayan.bharadiya@intel.com
Integer scaling (IS) is a nearest-neighbor upscaling technique that
simply scales up the existing pixels by an integer
(i.e., whole number) multiplier.Nearest-neighbor (NN) interpolation
works by filling in the missing color values in the upscaled image
with that of the coordinate-mapped nearest source pixel value.
Both IS and NN preserve the clarity of the original image. Integer
scaling is particularly useful for pixel art games that rely on
sharp, blocky images to deliver their distinctive look.
Introduce functions to configure the scaler filter coefficients to
enable nearest-neighbor filtering.
Bspec: 49247
changes since v6:
* Trust compiler, remove pointless inline keyword from cnl_coef_tap()
& cnl_nearest_filter_coef() functions (Ville)
changes since v4:
* Make cnl_coef_tap(), cnl_nearest_filter_coef() inline (Uma)
changes since v3:
* None
changes since v2:
* Move APIs from 5/5 into this patch.
* Change filter programming related function names to cnl_*, move
filter select bits related code into inline function (Ville)
changes since v1:
* Rearrange skl_scaler_setup_nearest_neighbor_filter() to iterate the
registers directly instead of the phases and taps (Ville)
changes since RFC:
* Refine the skl_scaler_setup_nearest_neighbor_filter() logic (Ville)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201020161427.6941-4-pankaj.laxminarayan.bharadiya@intel.com
Introduce scaler registers and bit fields needed to configure the
scaling filter in prgrammed mode and configure scaling filter
coefficients.
changes since v3:
* None
changes since v2:
* Change macro names to CNL_* and use +(set)*8 instead of adding
another trip through _PICK_EVEN (Ville).
changes since v1:
* None
changes since RFC:
* Parametrize scaler coeffient macros by 'set' (Ville)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201020161427.6941-3-pankaj.laxminarayan.bharadiya@intel.com
Introduce per-plane and per-CRTC scaling filter properties to allow
userspace to select the driver's default scaling filter or
Nearest-neighbor(NN) filter for upscaling operations on CRTC and
plane.
Drivers can set up this property for a plane by calling
drm_plane_create_scaling_filter() and for a CRTC by calling
drm_crtc_create_scaling_filter().
NN filter works by filling in the missing color values in the upscaled
image with that of the coordinate-mapped nearest source pixel value.
NN filter for integer multiple scaling can be particularly useful for
for pixel art games that rely on sharp, blocky images to deliver their
distinctive look.
changes since: v6:
* Move property doc to existing "Standard CRTC Properties" and
"Plane Composition Properties" doc comments (Simon)
changes since v3:
* Refactor code, add new function for common code (Ville)
changes since v2:
* Create per-plane and per-CRTC scaling filter property (Ville)
changes since v1:
* None
changes since RFC:
* Add separate properties for plane and CRTC (Ville)
Link: https://github.com/xbmc/xbmc/pull/18194
Link: https://github.com/xbmc/xbmc/pull/18567
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Simon Ser <contact@emersion.fr>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201020161427.6941-2-pankaj.laxminarayan.bharadiya@intel.com
This moves the to system move into the drivers, and moves all
the unbinds in the move path under driver control
Note: radeon/nouveau already wait so don't duplicate it.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201020010319.1692445-4-airlied@gmail.com
No functional changes in this patch.
With Bigjoiner, there are 2 pipes driving 2 halfs of 1
transcoder. The transcoder_mode has the full timings, and is used
for configuring the transcoder with the intended mode after
joining the 2 halves.
To clear the confusion, we rename intel_set_pipe_timings to
intel_set_transcoder_timings
v2:
* Split the renaming into separate patch (Ville)
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201008214535.22942-2-manasi.d.navare@intel.com
Add ABGR format with 10-bit components packed in 64-bit per pixel.
This format can be used to handle
VK_FORMAT_R10X6G10X6B10X6A10X6_UNORM_4PACK16 on little-endian
architectures.
Signed-off-by: Matteo Franchin <matteo.franchin@arm.com>
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201012164043.23630-1-matteo.franchin@arm.com
Move the DSC stuff out from the middle of the ICP HPD register
definitions. The location seems to have been selected by a
dice roll.
SHPD_FILTER_CNT addition also went astray due to the DSC
mess, so we also fix that vs. ICP_TC_HPD_{SHORT,LONG}_DETECT().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201006143349.5561-2-ville.syrjala@linux.intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
i915:
- Set all unused color plane offsets to ~0xfff again (Ville)
- Fix TGL DKL PHY DP vswing handling (Ville)
amdgpu:
- DCN clang warning fix
- eDP fix
- BACO fix
- Kernel documentation fixes
- SMU7 mclk fix
- VCN1 hw bug workaround
amdkfd:
- kvfree vs kfree fix
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJfjSHWAAoJEAx081l5xIa+uFsP/2uljZFRr2IsiEsB7pI4cmpr
lZMRRA6SdCvSbSIF0Lu2Ndi3LVDM0TsLezsy0uoQWHPUB/TTI6uU+FcRCHevSOAs
JCyfp+DsFgJr5OIWiQzgP6qk67ygPLeSpzCr+Lr0HwXdlfuMQi/zo1Flp2srndLk
M1FwTb6WYGWfBB77q9qYzO9sJb8lnykd+cyOkvgYJsEcJUy/XCKyYi4IG21qaSCH
louciBMme9TbuE4IuIvQjQMFBVxCkE0ZTVrLPLC4VIBsQEH9Ld3PSxHIiCZmyo3k
nHRIxuxy4FnbB6bulToyxG4w94HoRtRbtCh6aBdRDpSNuGO9j1hTZhfR9Pbchyph
eI4BF4JpS4K5BoSYVqM/uviB0Ck6I0acr415p0guDI0BdeQCCjDZkZRnou3dW27p
FNWRaFlMCMr9n2elYoB4saKHd8hSjVYTFyaP/ftPZOYiO9IeZg8VrOC2QJcHirVG
4M77pixjCzUNZLGSvg55liLhmt2YsRWqrYABuv20MkeZUEqc329wjPjyeJFB1fBn
msq7dup37pNttD0XlU5x6Goabbcg3BeAyTAuMVWLCf0mQPOo5yfTUoRuyE4qJsfp
JSNe7wDN8U2N1uze5pIO1QriGcWb2++QGm9mXcoDJ0dbdGW4giZ+tVzssDloqb0X
/mQN0Af4HQj0R/Sh4jGx
=/+Vb
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2020-10-19' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Some fixes queued up already for i915 and amdgpu, I've also included
the fix for the clang warning you've seen.
i915:
- set all unused color plane offsets to ~0xfff again (Ville)
- fix TGL DKL PHY DP vswing handling (Ville)
amdgpu:
- DCN clang warning fix
- eDP fix
- BACO fix
- kernel documentation fixes
- SMU7 mclk fix
- VCN1 hw bug workaround
amdkfd:
- kvfree vs kfree fix"
* tag 'drm-next-2020-10-19' of git://anongit.freedesktop.org/drm/drm:
drm/amd/display: Fix incorrect dsc force enable logic
drm/amdkfd: Use kvfree in destroy_crat_image
drm/amdgpu: vcn and jpeg ring synchronization
drm/amd/pm: increase mclk switch threshold to 200 us
docs: amdgpu: fix a warning when building the documentation
drm/amd/display: kernel-doc: document force_timing_sync
drm/amdgpu/swsmu: init the baco mutex in early_init
drm/amd/display: Fix module load hangs when connected to an eDP
drm/i915: Set all unused color plane offsets to ~0xfff again
drm/i915: Fix TGL DKL PHY DP vswing handling
Currently we call .hpd_irq_setup() directly just before display
resume, and follow it with another call via intel_hpd_init()
just afterwards. Assuming the hpd pins are marked as enabled
during the open-coded call these two things do exactly the
same thing (ie. enable HPD interrupts). Which even makes sense
since we definitely need working HPD interrupts for MST sideband
during the display resume.
So let's nuke the open-coded call and move the intel_hpd_init()
call earlier. However we need to leave the poll_init_work stuff
behind after the display resume as that will trigger display
detection while we're resuming. We don't want that trampling over
the display resume process. To make this a bit more symmetric
we turn this into a intel_hpd_poll_{enable,disable}() pair.
So we end up with the following transformation:
intel_hpd_poll_init() -> intel_hpd_poll_enable()
lone intel_hpd_init() -> intel_hpd_init()+intel_hpd_poll_disable()
.hpd_irq_setup()+resume+intel_hpd_init() -> intel_hpd_init()+resume+intel_hpd_poll_disable()
If we really would like to prevent all *long* HPD processing during
display resume we'd need some kind of software mechanism to simply
ignore all long HPDs. Currently we appear to have that just for
fbdev via ifbdev->hpd_suspended. Since we aren't exploding left and
right all the time I guess that's mostly sufficient.
For a bit of history on this, we first got a mechanism to block
hotplug processing during suspend in commit 15239099d7 ("drm/i915:
enable irqs earlier when resuming") on account of moving the irq enable
earlier. This then got removed in commit 50c3dc970a ("drm/fb-helper:
Fix hpd vs. initial config races") because the fdev initial config
got pushed to a later point. The second ad-hoc hpd_irq_setup() for
resume was added in commit 0e32b39cee ("drm/i915: add DP 1.2 MST
support (v0.7)") to be able to do MST sideband during the resume.
And finally we got a partial resurrection of the hpd blocking
mechanism in commit e8a8fedd57 ("drm/i915: Block fbdev HPD
processing during suspend"), but this time it only prevent fbdev
from handling hpd while resuming.
v2: Leave the poll_init_work behind
v3: Remove the extra intel_hpd_poll_disable() from display reset (Lyude)
Add the missing intel_hpd_poll_disable() to display init (Imre)
Cc: Lyude Paul <lyude@redhat.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201013181137.30560-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Rename intel_dp_sink_dpms() to intel_dp_set_power()
so one doesn't always have to convert from the DPMS
enum values to the actual DP D-states.
Also when dealing with a branch device this has nothing to
do with any sink, so the old name was nonsense anyway.
Also adjust the debug message accordingly, and pimp it
with the standard encoder id+name thing.
Trivial bits done with cocci:
@@
expression DP;
@@
(
- intel_dp_sink_dpms(DP, DRM_MODE_DPMS_OFF)
+ intel_dp_set_power(DP, DP_SET_POWER_D3)
|
- intel_dp_sink_dpms(DP, DRM_MODE_DPMS_ON)
+ intel_dp_set_power(DP, DP_SET_POWER_D0)
)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201016194800.25581-2-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Rather that try to trick LSPCON back into PCON mode from the .reset()
hook let's just do that as a regular part of the normal modeset
sequence, which is going to take care of the system resume case. During
a normal modeset this should normally be a nop as the mode should have
already been switched by .detect().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201016194800.25581-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
The "mmio" writes into vgpu registers are simple memory traps from the
guest into the host. We do not need to assert in the guest that the
device is awake for the io as we do not write to the device itself.
However, over time we have refactored all the mmio accessors with the
result that the vgpu reuses the gen2 accessors and so inherits the
assert for runtime-pm of the native device. The assert though has
actually been there since commit 3be0bf5acc ("drm/i915: Create vGPU
specific MMIO operations to reduce traps").
References: 3be0bf5acc ("drm/i915: Create vGPU specific MMIO operations to reduce traps")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Yan Zhao <yan.y.zhao@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200811092532.13753-1-chris@chris-wilson.co.uk
If i915.ko is being used as a passthrough device, it does not know if
the host is using intel_iommu. Mixing the iommu and gfx causes a few
issues (such as scanout overfetch) which we need to workaround inside
the driver, so if we detect we are running under a hypervisor, also
assume the device access is being virtualised.
Reported-by: Stefan Fritsch <sf@sfritsch.de>
Suggested-by: Stefan Fritsch <sf@sfritsch.de>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Stefan Fritsch <sf@sfritsch.de>
Cc: stable@vger.kernel.org
Tested-by: Stefan Fritsch <sf@sfritsch.de>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201019101523.4145-1-chris@chris-wilson.co.uk
The GPU is trashing the low pages of its reserved memory upon reset. If
we are using this memory for ringbuffers, then we will dutiful resubmit
the trashed rings after the reset causing further resets, and worse. We
must exclude this range from our own use. The value of 128KiB was found
by empirical measurement (and verified now with a selftest) on gen9.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201019165005.18128-2-chris@chris-wilson.co.uk
Hooray for generic fbdev support, making this a oneliner. We just
needed to fix preferred_depth fixed and the vmap support added first.
This is useful for testing fbdev testcases in igt. Right now we only
have a simple one in the fbdev testcases, which passes both info and
mmap subtests.
v2: Augment commit message as suggested by Melissa.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Melissa Wen <melissa.srw@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Melissa Wen <melissa.srw@gmail.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201009232156.3916879-3-daniel.vetter@ffwll.ch
Underruns happens when plane height + y offset is not a modulo of 4
when FBC is enabled. It happens when scanline is at vactive - 10 but
that is not feasible to do from the software side so here completely
disabling FBC when height + y offset matches to avoid visual glitches.
Specification says that it only affects TGL display C stepping and
newer but to simply the check and as TGL is already in final costumers
hands, pre-production display stepping A and B was also included.
BSpec: 52887 ICL
BSpec: 52888 EHL/JSL
BSpec: 52890/55378 TGL
BSpec: 53508 DG1
BSpec: 53273 RKL
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201019175609.28715-1-jose.souza@intel.com
This sequence is not part of "Sequences to Initialize Display" but
as noted in the MBus page the DBUF_CTL.Tracker_state_service needs
to be set to 8.
BSpec: 49213
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201019173906.18892-1-jose.souza@intel.com
In all 3 drivers there is a case where the driver knows the
bo is in SYSTEM so don't call the api that checks that.
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201019071314.1671485-4-airlied@gmail.com
On Tigerlake, we are seeing a repeat of commit d8f5053117 ("drm/i915/icl:
Forcibly evict stale csb entries") where, presumably, due to a missing
Global Observation Point synchronisation, the write pointer of the CSB
ringbuffer is updated _prior_ to the contents of the ringbuffer. That is
we see the GPU report more context-switch entries for us to parse, but
those entries have not been written, leading us to process stale events,
and eventually report a hung GPU.
However, this effect appears to be much more severe than we previously
saw on Icelake (though it might be best if we try the same approach
there as well and measure), and Bruce suggested the good idea of resetting
the CSB entry after use so that we can detect when it has been updated by
the GPU. By instrumenting how long that may be, we can set a reliable
upper bound for how long we should wait for:
513 late, avg of 61 retries (590 ns), max of 1061 retries (10099 ns)
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2045
References: d8f5053117 ("drm/i915/icl: Forcibly evict stale csb entries")
References: HSDES#22011327657, HSDES#1508287568
Suggested-by: Bruce Chang <yu.bruce.chang@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Bruce Chang <yu.bruce.chang@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: stable@vger.kernel.org # v5.4
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200915134923.30088-2-chris@chris-wilson.co.uk
(cherry picked from commit 233c1ae3c8)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
A CSB entry is 64b, and it is simpler for us to treat it as an array of
64b entries than as an array of pairs of 32b entries.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200915134923.30088-1-chris@chris-wilson.co.uk
(cherry picked from commit f24a44e52f)
(cherry picked from commit 3d4dbe0e0f0d04ebcea917b7279586817da8cf46)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We may try to preempt the currently executing request, only to find that
after unravelling all the dependencies that the original executing
context is still the earliest in the topological sort and re-submitted
back to HW (if we do detect some change in the ELSP that requires
re-submission). However, due to the way we check for wrap-around during
the unravelling, we mark any context that has been submitted just once
(i.e. with the rq->wa_tail set, but the ring->tail earlier) as
potentially wrapping and requiring a forced restore on resubmission.
This was expected to be not a problem, as it was anticipated that most
unwinding for preemption would result in a context switch and the few
that did not would be lost in the noise. It did not take long for
someone to find one particular workload where the cost of those extra
context restores was measurable.
However, since we know the wa_tail is of fixed size, and we know that a
request must be larger than the wa_tail itself, we can safely maintain
the check for request wrapping and check against a slightly future point
in the ring that includes an expected wa_tail. (That is if the
ring->tail is already set to rq->wa_tail, including another 8 bytes in
the check does not invalidate the incremental wrap detection.)
Fixes: 8ab3a3812a ("drm/i915/gt: Incrementally check for rewinding")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Bruce Chang <yu.bruce.chang@intel.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.4+
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201002083425.4605-1-chris@chris-wilson.co.uk
(cherry picked from commit bb65548e3c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When running gem_exec_nop, it floods the system with many requests (with
the goal of userspace submitting faster than the HW can process a single
empty batch). This causes the driver to continually resubmit new
requests onto the end of an active context, a flood of lite-restore
preemptions. If we time this just right, Tigerlake hangs.
Inserting a small delay between the processing of CS events and
submitting the next context, prevents the hang. Naturally it does not
occur with debugging enabled. The suspicion then is that this is related
to the issues with the CS event buffer, and inserting an mmio read of
the CS pointer status appears to be very successful in preventing the
hang. Other registers, or uncached reads, or plain mb, do not prevent
the hang, suggesting that register is key -- but that the hang can be
prevented by a simple udelay, suggests it is just a timing issue like
that encountered by commit 233c1ae3c8 ("drm/i915/gt: Wait for CSB
entries on Tigerlake"). Also note that the hang is not prevented by
applying CTX_DESC_FORCE_RESTORE, or by inserting a delay on the GPU
between requests.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Bruce Chang <yu.bruce.chang@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: stable@vger.kernel.org
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201015195023.32346-1-chris@chris-wilson.co.uk
(cherry picked from commit 6ca7217dff)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Matthew Auld noted that on more recent systems (such as the parser for
gen9) we may have objects that are larger than expected by the GEM uAPI
(i.e. greater than u32). These objects would have incorrect implicit
batch lengths, causing the parser to reject them for being incomplete,
or worse.
Based on a patch by Matthew Auld.
Reported-by: Matthew Auld <matthew.auld@intel.com>
Fixes: 435e8fc059 ("drm/i915: Allow parsing of unsized batches")
Testcase: igt/gem_exec_params/larger-than-life-batch
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20201015115954.871-1-chris@chris-wilson.co.uk
(cherry picked from commit 57b2d834bf)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Currently we leave the cache_level of the initial fb obj
set to NONE. This means on eLLC machines the first pin_to_display()
will try to switch it to WT which requires a vma unbind+bind.
If that happens during the fbdev initialization rcu does not
seem operational which causes the unbind to get stuck. To
most appearances this looks like a dead machine on boot.
Avoid the unbind by already marking the object cache_level
as WT when creating it. We still do an excplicit ggtt pin
which will rewrite the PTEs anyway, so they will match whatever
cache level we set.
Cc: <stable@vger.kernel.org> # v5.7+
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2381
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201007120329.17076-1-ville.syrjala@linux.intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20201015122138.30161-1-chris@chris-wilson.co.uk
(cherry picked from commit d46b60a2e8)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
In order to avoid functional breakage of mis-programmed applications that
have grown to depend on unused MOCS entries, we are programming
those entries to be equal to fully cached ("L3 + LLC") entry.
These reserved and unspecified entries should not be used as they may be
changed to less performant variants with better coherency in the future
if more entries are needed.
v2: As suggested by Lucas De Marchi to utilise __init_mocs_table for
programming default value, setting I915_MOCS_PTE index of tgl_mocs_table
with desired value.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Francisco Jerez <currojerez@riseup.net>
Cc: Mathew Alwin <alwin.mathew@intel.com>
Cc: Mcguire Russell W <russell.w.mcguire@intel.com>
Cc: Spruit Neil R <neil.r.spruit@intel.com>
Cc: Zhou Cheng <cheng.zhou@intel.com>
Cc: Benemelis Mike G <mike.g.benemelis@intel.com>
Signed-off-by: Ayaz A Siddiqui <ayaz.siddiqui@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200729102539.134731-2-ayaz.siddiqui@intel.com
Cc: stable@vger.kernel.org
(cherry picked from commit 4d8a5cfe3b)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
In commit 7994672309 ("drm/i915: Assume 100% brightness when not in
DPCD control mode"), we fixed the brightness level when DPCD control was
not active to max brightness. This is as good as we can guess since most
backlights go on full when uncontrolled.
However in doing so we changed the semantics of the initial
'backlight.enabled' value. At least on Pixelbooks, they were relying
on the brightness level in DP_EDP_BACKLIGHT_BRIGHTNESS_MSB to be 0 on
boot such that enabled would be false. This causes the device to be
enabled when the brightness is set. Without this, brightness control
doesn't work. So by changing brightness to max, we also flipped enabled
to be true on boot.
To fix this, make enabled a function of brightness and backlight control
mechanism.
Fixes: 7994672309 ("drm/i915: Assume 100% brightness when not in DPCD control mode")
Cc: Lyude Paul <lyude@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Kevin Chowski <chowski@chromium.org>>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200918002845.32766-1-sean@poorly.run
(cherry picked from commit 4ade8f31c2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
In switching to using objects for our ppGTT scratch pages, care was not
taken to avoid trying to unref NULL objects on failure. And for gen6
ppGTT, it appears we forgot entirely to unwind after a partial allocation
failure.
Fixes: 89351925a4 ("drm/i915/gt: Switch to object allocations for page directories")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201019083444.1286-1-chris@chris-wilson.co.uk
If guest fills non-priv bb on ApolloLake/Broxton as Mesa i965 does in:
717e7539124d (i965: Use a WC map and memcpy for the batch instead of pw-)
Due to the missing flush of bb filled by VM vCPU, host GPU hangs on
executing these MI_BATCH_BUFFER.
Temporarily workaround this by setting SNOOP bit for PAT3 used by PPGTT
PML4 PTE: PAT(0) PCD(1) PWT(1).
The performance is still expected to be low, will need further improvement.
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20201012045231.226748-1-colin.xu@intel.com
Guest driver may reset HWSP to 0 as init value during D3->D0:
The full sequence is:
- Boot ->D0
- Update HWSP
- D0->D3
- ...In D3 state...
- D3->D0
- DMLR reset.
- Set engine HWSP to 0.
- Set engine ring mode to 0.
- Set engine HWSP to correct value.
- Set engine ring mode to correct value.
Ring mode is masked register so set 0 won't take effect.
However HWPS addr 0 is considered as invalid GGTT address which will
report error like:
gvt: vgpu 1: write invalid HWSP address, reg:0x2080, value:0x0
gvt: vgpu 1: fail to emulate MMIO write 00002080 len 4
Detected your guest driver doesn't support GVT-g.
Now vgpu 2 will enter failsafe mode.
Zero out HWSP addr is considered as a valid setting from device driver
so don't treat it as invalid HWSP addr.
V2:
Treat HWSP addr 0 as valid. (zhenyu)
V3:
Change patch title.
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200911065239.147789-1-colin.xu@intel.com
This adds support for the TDO TL070WSH30 TFT-LCD panel module.
The panel has a 1024×600 resolution and uses 24 bit RGB per pixel.
It provides a MIPI DSI interface to the host, a built-in LED backlight
and touch controller.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200915121912.4347-5-narmstrong@baylibre.com
i915_gem_object_map implements fairly low-level vmap functionality in a
driver. Split it into two helpers, one for remapping kernel memory which
can use vmap, and one for I/O memory that uses vmap_pfn.
The only practical difference is that alloc_vm_area prefeaults the vmalloc
area PTEs, which doesn't seem to be required here for the kernel memory
case (and could be added to vmap using a flag if actually required).
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Link: https://lkml.kernel.org/r/20201002122204.1534411-9-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kmap for !PageHighmem is just a convoluted way to say page_address, and
kunmap is a no-op in that case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Link: https://lkml.kernel.org/r/20201002122204.1534411-8-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
shmem_pin_map somewhat awkwardly reimplements vmap using alloc_vm_area and
manual pte setup. The only practical difference is that alloc_vm_area
prefeaults the vmalloc area PTEs, which doesn't seem to be required here
(and could be added to vmap using a flag if actually required). Switch to
use vmap, and use vfree to free both the vmalloc mapping and the page
array, as well as dropping the references to each page.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Link: https://lkml.kernel.org/r/20201002122204.1534411-7-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The typical set of driver updates across the subsystem:
- Driver minor changes and bug fixes for mlx5, efa, rxe, vmw_pvrdma, hns,
usnic, qib, qedr, cxgb4, hns, bnxt_re
- Various rtrs fixes and updates
- Bug fix for mlx4 CM emulation for virtualization scenarios where MRA
wasn't working right
- Use tracepoints instead of pr_debug in the CM code
- Scrub the locking in ucma and cma to close more syzkaller bugs
- Use tasklet_setup in the subsystem
- Revert the idea that 'destroy' operations are not allowed to fail at
the driver level. This proved unworkable from a HW perspective.
- Revise how the umem API works so drivers make fewer mistakes using it
- XRC support for qedr
- Convert uverbs objects RWQ and MW to new the allocation scheme
- Large queue entry sizes for hns
- Use hmm_range_fault() for mlx5 On Demand Paging
- uverbs APIs to inspect the GID table instead of sysfs
- Move some of the RDMA code for building large page SGLs into
lib/scatterlist
-----BEGIN PGP SIGNATURE-----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=LKpl
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"A usual cycle for RDMA with a typical mix of driver and core subsystem
updates:
- Driver minor changes and bug fixes for mlx5, efa, rxe, vmw_pvrdma,
hns, usnic, qib, qedr, cxgb4, hns, bnxt_re
- Various rtrs fixes and updates
- Bug fix for mlx4 CM emulation for virtualization scenarios where
MRA wasn't working right
- Use tracepoints instead of pr_debug in the CM code
- Scrub the locking in ucma and cma to close more syzkaller bugs
- Use tasklet_setup in the subsystem
- Revert the idea that 'destroy' operations are not allowed to fail
at the driver level. This proved unworkable from a HW perspective.
- Revise how the umem API works so drivers make fewer mistakes using
it
- XRC support for qedr
- Convert uverbs objects RWQ and MW to new the allocation scheme
- Large queue entry sizes for hns
- Use hmm_range_fault() for mlx5 On Demand Paging
- uverbs APIs to inspect the GID table instead of sysfs
- Move some of the RDMA code for building large page SGLs into
lib/scatterlist"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (191 commits)
RDMA/ucma: Fix use after free in destroy id flow
RDMA/rxe: Handle skb_clone() failure in rxe_recv.c
RDMA/rxe: Move the definitions for rxe_av.network_type to uAPI
RDMA: Explicitly pass in the dma_device to ib_register_device
lib/scatterlist: Do not limit max_segment to PAGE_ALIGNED values
IB/mlx4: Convert rej_tmout radix-tree to XArray
RDMA/rxe: Fix bug rejecting all multicast packets
RDMA/rxe: Fix skb lifetime in rxe_rcv_mcast_pkt()
RDMA/rxe: Remove duplicate entries in struct rxe_mr
IB/hfi,rdmavt,qib,opa_vnic: Update MAINTAINERS
IB/rdmavt: Fix sizeof mismatch
MAINTAINERS: CISCO VIC LOW LATENCY NIC DRIVER
RDMA/bnxt_re: Fix sizeof mismatch for allocation of pbl_tbl.
RDMA/bnxt_re: Use rdma_umem_for_each_dma_block()
RDMA/umem: Move to allocate SG table from pages
lib/scatterlist: Add support in dynamic allocation of SG table from pages
tools/testing/scatterlist: Show errors in human readable form
tools/testing/scatterlist: Rejuvenate bit-rotten test
RDMA/ipoib: Set rtnl_link_ops for ipoib interfaces
RDMA/uverbs: Expose the new GID query API to user space
...
In function via_mem_alloc`s error branch, DRM_ERROR is protected
in the mutex_lock(&dev->struct_mutex) area.
>From the code, we see that DRM_ERROR is just an error log print
without any struct element, there is no need to protect this.
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200814083021.8962-1-bernard@vivo.com
platform_get_irq() returns -ERRNO on error. In such case comparison
to 0 would pass the check.
Fixes: 179c02fe90 ("drm/tve200: Add new driver for TVE200")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200827071107.27429-2-krzk@kernel.org
platform_get_irq() returns -ERRNO on error. In such case comparison
to 0 would pass the check.
Fixes: 5fc537bfd0 ("drm/mcde: Add new driver for ST-Ericsson MCDE")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200827071107.27429-1-krzk@kernel.org
This eliminates the following sparse warning:
drivers/gpu/drm/panel/panel-sitronix-st7703.c:156:26: warning: symbol
'jh057n00900_panel_desc' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
[Use static const]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200912033809.142773-1-yanaijie@huawei.com
This eliminates the following sparse warning:
drivers/gpu/drm/bridge/adv7511/adv7511_audio.c:58:5: warning: symbol
'adv7511_hdmi_hw_params' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200912033826.142923-1-yanaijie@huawei.com
This eliminates the following sparse warning:
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c:527:5: warning: symbol
'analogix_dp_start_aux_transaction' was not declared. Should it be
static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200912033843.143240-1-yanaijie@huawei.com
Add the support for enabling optional regulator that may be used as VCC
source.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Replaced 'error' variable with 'ret']
[Renamed regulator from 'vcc' to 'power']
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200922105526.5252-1-laurent.pinchart+renesas@ideasonboard.com
Add a helper so we can set per asic default values. Also,
the module parameter is currently clamped to 8, but clamp it
per asic just in case some asics have different limits in the
future. Enable the option on gfx6,7 as well for consistency.
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
psp sysfs not cleaned up on driver unload for sienna_cichlid
Fixes: ce87c98db4 ("drm/amdgpu: Include sienna_cichlid in USBC PD FW support.")
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some setups will fail to build. So copy dcn301 makefile setup
which is known to work
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On connector destruction call drm_dp_mst_topology_mgr_destroy
to release resources allocated in drm_dp_mst_topology_mgr_init.
Do it only if MST manager was initilized before otherwsie a crash
is seen on driver unload/device unplug.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Drop navy_flounder hardcode of using soft pptable, so that it
can use pptable from vbios when available.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a new list in VM for done state i.e. BOs which are
invalidated and updated in PTEs.
Signed-off-by: Mihir Bhogilal Patel <Mihir.Patel@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update golden setting for sienna_cichlid.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
it will cause smu sysfs node of "pp_features" show error.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
remove duplicate gfxhub v1.1 function set.
put function of gfxhub_v1_1_get_xgmi_info to gfxhub v1_0 function set.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
noretry = 0 cause some dGPU's kfd page fault tests fail,
so set noretry to 1 for these special ASICs:
vega20/navi10/navi14
v2: merge raven and default case due to the same setting
v3: remove ARCTURUS
Signed-off-by: Chengming Gui <Jack.Gui@amd.com>
Acked-by: Felix Kuhling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to enable display IP block for vangogh platforms.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
S/G (scatter/gather) display support for display
buffers in system memory.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On some panels hooked up to the ti-sn65dsi86 bridge chip we found that
link training was failing. Specifically, we'd see:
ti_sn65dsi86 2-002d: [drm:ti_sn_bridge_enable] *ERROR* Link training failed, link is off (-5)
The panel was hooked up to a logic analyzer and it was found that, as
part of link training, the bridge chip was writing a 0x1 to DPCD
address 00600h and the panel responded NACK. As can be seen in header
files, the write of 0x1 to DPCD address 0x600h means we were trying to
write the value DP_SET_POWER_D0 to the register DP_SET_POWER. The
panel vendor says that a NACK in this case is not unexpected and means
"not ready, try again".
In testing, we found that this panel would respond with a NACK in
about 1/25 times. Adding the retry logic worked fine and the most
number of tries needed was 3. Just to be safe, we'll add 10 tries
here and we'll add a little blurb to the logs if we ever need more
than 5.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-By: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201002135920.1.I2adbc90b2db127763e2444bd5a4e5bf30e1db8e5@changeid
intel_dp_ycbcr420_config() is rather pointless. Just inline it
directly into intel_dp_compute_config(). This gets rid of the
ugly double assignment of output_format.
Not really sure what the best policy would be when the user
supplies a mode classified by the display as "YCbCr 4:2:0
only", but we know that we can't do YCbCr 4:2:0 output. For
now keep the current behaviour of just silently upgrade
it to RGB 4:4:4.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200924184156.24491-3-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Remove the lspcon special case from intel_dp_compute_config() and
just treat it like any other DFP than can do 4:4:4->4:2:0 conversion.
The only difference between the two codepaths was that the lspcon
code tried to already halve port_clock. That was just total nonsense
as we hadn't even computed the base port_clock at that time.
All that stuff happens intel_dp_compute_link_config*() and it
already takes care of the 4:2:0 clock reduction.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200924184156.24491-2-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
crtc_state->lspcon_downsampling isn't particularly useful at
the moment since we can't even do proper readout for it.
Let's get rid of it. Will help with unifying the LSPCON with
the regular DFP YCbCr output support.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200924184156.24491-1-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Currently we leave the cache_level of the initial fb obj
set to NONE. This means on eLLC machines the first pin_to_display()
will try to switch it to WT which requires a vma unbind+bind.
If that happens during the fbdev initialization rcu does not
seem operational which causes the unbind to get stuck. To
most appearances this looks like a dead machine on boot.
Avoid the unbind by already marking the object cache_level
as WT when creating it. We still do an excplicit ggtt pin
which will rewrite the PTEs anyway, so they will match whatever
cache level we set.
Cc: <stable@vger.kernel.org> # v5.7+
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2381
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201007120329.17076-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
WAC6entrylatency is trying to fix excessive rc6 entry latency caused
by the extra delay from FBC_LLC_READ_CTRL, which is there for some
extra sync with uncore for frame buffer caching in LLC.
Reading through the hsd the recommendation was to set the FBC_LLC_FULLY_OPEN
bit to disable this extra delay entirely. This can be done whenever fb LLC
caching is not used. The alternative suggestion was to reduce the delay to
eg. 0x5 via updated BIOS programming instructions. But all the kbl/cfl
machines I've seen still have the default 0xff programmed. As we never use
fb LLC caching let's just apply the w/a to all skl derivatives to get
consistent rc6 latencies.
I was able to measure the effect of FBC_LLC_READ_CTRL to rc6 latency
via forcewake. Here's a graph of some of the results:
sleep;fw_req=1;wait fw_ack==1;sleep;fw_req=0;wait fw_ack==0
fw_ack==1 duration
160us +----------------------------------------------------------------+
| + + $$+ + + |
| $$ $ $ ******$$ ** $ $**$* #########$$######|
140us |-$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$*$$$$$$$$$$$$$$$$ $$$$$$|
| $ * # |
| $ * # |
120us |$+ * # +-|
|$ * # |
|$ * # # |
100us |$+ ************######################## +-|
|$ * *# |
|$ ***** ######### |
80us |$+ * # #### ## +-|
|$ **** ### # # |
| ** #### FBC_LLC_READ_CTRL: 0x8000 ******* |
60us |-###### FBC_LLC_READ_CTRL: 0xffff #######-|
|## + + FBC_LLC_READ_CTRL: 0x400000ff $$$$$$$ |
+----------------------------------------------------------------+
0ms 10ms 20ms 30ms 40ms 50ms 60ms
sleep duration
The default FBC_LLC_READ_CTRL value of 0xff is documented to give us
a 170usec delay. That tracks well with the knees at 0xffff->~44msec and
0x8000->~22msec we see in the graph.
We can see that if we sleep longer than the FBC_LLC_READ_CTRL delay
we always observe the full (~145usec) rc6 wakeup latency. But if we sleep
for less than the FBC_LLC_READ_CTRL delay we see a quicker fw wakeup,
presumably due the hardware not having yet entered rc6 fully.
The other plateaus in the graph I suspect correspond to some shallower
internal rc states.
v2: s/usec/msec/ typo in commit msg
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716190426.17047-2-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
A recent bspec update has provided a new cdclk table for RKL. All of
the cdclk values are the same as those we've been using on ICL, TGL,
etc., but we obtain them by doubling both the PLL ratio and CD2X divider
numbers.
Bspec: 49202
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201015220038.271740-1-matthew.d.roper@intel.com
Repeat our sanitychecks from before execution to after execution. One
expects that if we were to see these, the gpu would already be on fire,
but the timing may be informative.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201015190816.31763-1-chris@chris-wilson.co.uk
We may try to preempt the currently executing request, only to find that
after unravelling all the dependencies that the original executing
context is still the earliest in the topological sort and re-submitted
back to HW (if we do detect some change in the ELSP that requires
re-submission). However, due to the way we check for wrap-around during
the unravelling, we mark any context that has been submitted just once
(i.e. with the rq->wa_tail set, but the ring->tail earlier) as
potentially wrapping and requiring a forced restore on resubmission.
This was expected to be not a problem, as it was anticipated that most
unwinding for preemption would result in a context switch and the few
that did not would be lost in the noise. It did not take long for
someone to find one particular workload where the cost of those extra
context restores was measurable.
However, since we know the wa_tail is of fixed size, and we know that a
request must be larger than the wa_tail itself, we can safely maintain
the check for request wrapping and check against a slightly future point
in the ring that includes an expected wa_tail. (That is if the
ring->tail is already set to rq->wa_tail, including another 8 bytes in
the check does not invalidate the incremental wrap detection.)
Fixes: 8ab3a3812a ("drm/i915/gt: Incrementally check for rewinding")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Bruce Chang <yu.bruce.chang@intel.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.4+
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201002083425.4605-1-chris@chris-wilson.co.uk
When running gem_exec_nop, it floods the system with many requests (with
the goal of userspace submitting faster than the HW can process a single
empty batch). This causes the driver to continually resubmit new
requests onto the end of an active context, a flood of lite-restore
preemptions. If we time this just right, Tigerlake hangs.
Inserting a small delay between the processing of CS events and
submitting the next context, prevents the hang. Naturally it does not
occur with debugging enabled. The suspicion then is that this is related
to the issues with the CS event buffer, and inserting an mmio read of
the CS pointer status appears to be very successful in preventing the
hang. Other registers, or uncached reads, or plain mb, do not prevent
the hang, suggesting that register is key -- but that the hang can be
prevented by a simple udelay, suggests it is just a timing issue like
that encountered by commit 233c1ae3c8 ("drm/i915/gt: Wait for CSB
entries on Tigerlake"). Also note that the hang is not prevented by
applying CTX_DESC_FORCE_RESTORE, or by inserting a delay on the GPU
between requests.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Bruce Chang <yu.bruce.chang@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: stable@vger.kernel.org
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201015195023.32346-1-chris@chris-wilson.co.uk
While we do lack the faster shared LLC, we should still have support
for snooping over PCIe.
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201014191937.1266226-11-lucas.demarchi@intel.com
Update the DMC_DEBUG_DC5 register to its new location and do not try
reading the DC6 counter since DG1 doesn't support DC6.
v2: Use IS_DGFX() instead of IS_DG1(). Even if not having DC6 is not
directly related to DGFX, the register move to a new location is. So in
future, if there is one supporting DC6, it would just need to add the
other register rather than fixing the case of a wrong register being
read (Matt)
Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201014191937.1266226-10-lucas.demarchi@intel.com
DC6 is not supported on DG1, so change the allowed DC mask for DG1.
This is not yet on bspec, but it has been confirmed by HW engineers.
Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201014191937.1266226-9-lucas.demarchi@intel.com
- rework the non-coherent DMA allocator
- move private definitions out of <linux/dma-mapping.h>
- lower CMA_ALIGNMENT (Paul Cercueil)
- remove the omap1 dma address translation in favor of the common
code
- make dma-direct aware of multiple dma offset ranges (Jim Quinlan)
- support per-node DMA CMA areas (Barry Song)
- increase the default seg boundary limit (Nicolin Chen)
- misc fixes (Robin Murphy, Thomas Tai, Xu Wang)
- various cleanups
-----BEGIN PGP SIGNATURE-----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=Bkf/
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- rework the non-coherent DMA allocator
- move private definitions out of <linux/dma-mapping.h>
- lower CMA_ALIGNMENT (Paul Cercueil)
- remove the omap1 dma address translation in favor of the common code
- make dma-direct aware of multiple dma offset ranges (Jim Quinlan)
- support per-node DMA CMA areas (Barry Song)
- increase the default seg boundary limit (Nicolin Chen)
- misc fixes (Robin Murphy, Thomas Tai, Xu Wang)
- various cleanups
* tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits)
ARM/ixp4xx: add a missing include of dma-map-ops.h
dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling
dma-direct: factor out a dma_direct_alloc_from_pool helper
dma-direct check for highmem pages in dma_direct_alloc_pages
dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h>
dma-mapping: move large parts of <linux/dma-direct.h> to kernel/dma
dma-mapping: move dma-debug.h to kernel/dma/
dma-mapping: remove <asm/dma-contiguous.h>
dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h>
dma-contiguous: remove dma_contiguous_set_default
dma-contiguous: remove dev_set_cma_area
dma-contiguous: remove dma_declare_contiguous
dma-mapping: split <linux/dma-mapping.h>
cma: decrease CMA_ALIGNMENT lower limit to 2
firewire-ohci: use dma_alloc_pages
dma-iommu: implement ->alloc_noncoherent
dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods
dma-mapping: add a new dma_alloc_pages API
dma-mapping: remove dma_cache_sync
53c700: convert to dma_alloc_noncoherent
...
Inspired by a patch by Chris Wilson for vgem. Plus this gives us vmap
at the gem bo level, which we need for generic fbdev emulation.
Luckily shmem also tracks ->vaddr, so we just need to adjust the code
all over a bit to make this fit.
Also wire up handle_to_fd, dunno why that was missing.
v2:
- Drop now unused container_of #define (Melissa)
- Make sure we keep creating cached objects, this is for testing
(Thomas)
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Melissa Wen <melissa.srw@gmail.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201013111027.375999-1-daniel.vetter@ffwll.ch
The only thing we support is xrgb8888.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Melissa Wen <melissa.srw@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Melissa Wen <melissa.srw@gmail.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201009232156.3916879-1-daniel.vetter@ffwll.ch
DG1 shares some workarounds with TGL and RKL and also has some
additional workarounds of its own.
v2: Correct location of Wa_1408615072 (JohnH).
v3: Apply WAs 1606700617, 18011464164 and 22010931296 to DG1 (José)
v4 (Anusha)
- Add Wa_22010271021
- s/Wa_14010096844/Wa_1409836686
v5:
- Extend Wa_14010919138 to all revs (Matt Atwood)
- Power gate media is global gen12 design. (Rodrigo)
- Rebase (Lucas)
v6: use REG_BIT() to fix checkpatch warning (Lucas)
BSpec: 53508
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201014191937.1266226-8-lucas.demarchi@intel.com
Add support to load DMC v2.0.2 on DG1
While we're at it, make TGL use the same GEN12 firmware size definition
and remove obsolete comment.
Bpec: 49230
v2: do not replace GEN12_CSR_MAX_FW_SIZE (from José)
and replace stale comment
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201014191937.1266226-7-lucas.demarchi@intel.com
Add DG1 DPLL Enable register macro and use the macro to enable the
correct DPLL based on PLL id. Although we use
_MG_PLL1_ENABLE/_MG_PLL2_ENABLE these are rather combo phys.
While at it, fix coding style: wrong newlines and use if/else chain
v2: Rewrite original patch from Aditya Swarup based on refactors
upstream
Bspec: 49443, 49206
Cc: Clinton Taylor <Clinton.A.Taylor@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Aditya Swarup <aditya.swarup@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Aditya Swarup <aditya.swarup@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201014191937.1266226-6-lucas.demarchi@intel.com
Add entries for dg1 plls and setup dg1_pll_mgr to reuse ICL callbacks.
Initial setup for shared dplls DPLL0/1 for DDIA/DDIB and DPLL2/3 for
DDI-TC1/DDI-TC2. Configure dpll cfgcrx registers to drive the plls on
DG1.
v2 (Lucas): Reword commit message and add missing update_ref_clks hook
(requested by Matt Roper)
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201014191937.1266226-5-lucas.demarchi@intel.com
DG1 has 4 DPLLs where DPLL0 and DPLL1 drive DDIA/B and
DPLL2 and DPLL3 drive DDI-TC1/DDI-TC2.
Introduce DG1_DPLL_CFCRx() helper macros to configure
DPLL registers.
Bspec: 50288, 50299
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201014191937.1266226-4-lucas.demarchi@intel.com
TGL power wells can be re-used for DG1 with the exception of the fake
power well for TC_COLD.
v2: use logic to skip power wells while copying instead of duplicating
the definition of TGL power wells (Matt Roper)
Bspec: 49182
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201014191937.1266226-3-lucas.demarchi@intel.com
The skus guarded by IS_CNL_WITH_PORT_F() have port F and thus they need
those power wells. The others don't have those. Up to now we were
just overriding the number of power wells on !IS_CNL_WITH_PORT_F(),
relying on those power wells to be the last ones. Now that we have logic
in place to skip power wells by id, use it instead.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201014191937.1266226-2-lucas.demarchi@intel.com
This allows us to skip power wells on a platform allowing it to re-use
the table from another one instead of having to create a new table from
scratch that is basically a copy with a few removals.
Cc: Imre Deak <imre.deak@intel.com>
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
[ Adapt ignore logic to be based on pw id rather than adding a new
field, as suggested by Imre ]
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201014191937.1266226-1-lucas.demarchi@intel.com
Matthew Auld noted that on more recent systems (such as the parser for
gen9) we may have objects that are larger than expected by the GEM uAPI
(i.e. greater than u32). These objects would have incorrect implicit
batch lengths, causing the parser to reject them for being incomplete,
or worse.
Based on a patch by Matthew Auld.
Reported-by: Matthew Auld <matthew.auld@intel.com>
Fixes: 435e8fc059 ("drm/i915: Allow parsing of unsized batches")
Testcase: igt/gem_exec_params/larger-than-life-batch
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20201015115954.871-1-chris@chris-wilson.co.uk
New driver:
Cadence MHDP8546 DisplayPort bridge driver
core:
- cross-driver scatterlist cleanups
- devm_drm conversions
- remove drm_dev_init
- devm_drm_dev_alloc conversion
ttm:
- lots of refactoring and cleanups
bridges:
- chained bridge support in more drivers
panel:
- misc new panels
scheduler:
- cleanup priority levels
displayport:
- refactor i915 code into helpers for nouveau
i915:
- split into display and GT trees
- WW locking refactoring in GEM
- execbuf2 extension mechanism
- syncobj timeline support
- GEN 12 HOBL display powersaving
- Rocket Lake display additions
- Disable FBC on Tigerlake
- Tigerlake Type-C + DP improvements
- Hotplug interrupt refactoring
amdgpu:
- Sienna Cichlid updates
- Navy Flounder updates
- DCE6 (SI) support for DC
- Plane rotation enabled
- TMZ state info ioctl
- PCIe DPC recovery support
- DC interrupt handling refactor
- OLED panel fixes
amdkfd:
- add SMI events for thermal throttling
- SMI interface events ioctl update
- process eviction counters
radeon:
- move to dma_ for allocations
- expose sclk via sysfs
msm:
- DSI support for sm8150/sm8250
- per-process GPU pagetable support
- Displayport support
mediatek:
- move HDMI phy driver to PHY
- convert mtk-dpi to bridge API
- disable mt2701 tmds
tegra:
- bridge support
exynos:
- misc cleanups
vc4:
- dual display cleanups
ast:
- cleanups
gma500:
- conversion to GPIOd API
hisilicon:
- misc reworks
ingenic:
- clock handling and format improvements
mcde:
- DSI support
mgag200:
- desktop g200 support
mxsfb:
- i.MX7 + i.MX8M
- alpha plane support
panfrost:
- devfreq support
- amlogic SoC support
ps8640:
- EDID from eDP retrieval
tidss:
- AM65xx YUV workaround
virtio:
- virtio-gpu exported resources
rcar-du:
- R8A7742, R8A774E1 and R8A77961 support
- YUV planar format fixes
- non-visible plane handling
- VSP device reference count fix
- Kconfig fix to avoid displaying disabled options in .config
-----BEGIN PGP SIGNATURE-----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=4H8J
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Not a major amount of change, the i915 trees got split into display
and gt trees to better facilitate higher level review, and there's a
major refactoring of i915 GEM locking to use more core kernel concepts
(like ww-mutexes). msm gets per-process pagetables, older AMD SI cards
get DC support, nouveau got a bump in displayport support with common
code extraction from i915.
Outside of drm this contains a couple of patches for hexint
moduleparams which you've acked, and a virtio common code tree that
you should also get via it's regular path.
New driver:
- Cadence MHDP8546 DisplayPort bridge driver
core:
- cross-driver scatterlist cleanups
- devm_drm conversions
- remove drm_dev_init
- devm_drm_dev_alloc conversion
ttm:
- lots of refactoring and cleanups
bridges:
- chained bridge support in more drivers
panel:
- misc new panels
scheduler:
- cleanup priority levels
displayport:
- refactor i915 code into helpers for nouveau
i915:
- split into display and GT trees
- WW locking refactoring in GEM
- execbuf2 extension mechanism
- syncobj timeline support
- GEN 12 HOBL display powersaving
- Rocket Lake display additions
- Disable FBC on Tigerlake
- Tigerlake Type-C + DP improvements
- Hotplug interrupt refactoring
amdgpu:
- Sienna Cichlid updates
- Navy Flounder updates
- DCE6 (SI) support for DC
- Plane rotation enabled
- TMZ state info ioctl
- PCIe DPC recovery support
- DC interrupt handling refactor
- OLED panel fixes
amdkfd:
- add SMI events for thermal throttling
- SMI interface events ioctl update
- process eviction counters
radeon:
- move to dma_ for allocations
- expose sclk via sysfs
msm:
- DSI support for sm8150/sm8250
- per-process GPU pagetable support
- Displayport support
mediatek:
- move HDMI phy driver to PHY
- convert mtk-dpi to bridge API
- disable mt2701 tmds
tegra:
- bridge support
exynos:
- misc cleanups
vc4:
- dual display cleanups
ast:
- cleanups
gma500:
- conversion to GPIOd API
hisilicon:
- misc reworks
ingenic:
- clock handling and format improvements
mcde:
- DSI support
mgag200:
- desktop g200 support
mxsfb:
- i.MX7 + i.MX8M
- alpha plane support
panfrost:
- devfreq support
- amlogic SoC support
ps8640:
- EDID from eDP retrieval
tidss:
- AM65xx YUV workaround
virtio:
- virtio-gpu exported resources
rcar-du:
- R8A7742, R8A774E1 and R8A77961 support
- YUV planar format fixes
- non-visible plane handling
- VSP device reference count fix
- Kconfig fix to avoid displaying disabled options in .config"
* tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drm: (1494 commits)
drm/ingenic: Fix bad revert
drm/amdgpu: Fix invalid number of character '{' in amdgpu_acpi_init
drm/amdgpu: Remove warning for virtual_display
drm/amdgpu: kfd_initialized can be static
drm/amd/pm: setup APU dpm clock table in SMU HW initialization
drm/amdgpu: prevent spurious warning
drm/amdgpu/swsmu: fix ARC build errors
drm/amd/display: Fix OPTC_DATA_FORMAT programming
drm/amd/display: Don't allow pstate if no support in blank
drm/panfrost: increase readl_relaxed_poll_timeout values
MAINTAINERS: Update entry for st7703 driver after the rename
Revert "gpu/drm: ingenic: Add option to mmap GEM buffers cached"
drm/amd/display: HDMI remote sink need mode validation for Linux
drm/amd/display: Change to correct unit on audio rate
drm/amd/display: Avoid set zero in the requested clk
drm/amdgpu: align frag_end to covered address space
drm/amdgpu: fix NULL pointer dereference for Renoir
drm/vmwgfx: fix regression in thp code due to ttm init refactor.
drm/amdgpu/swsmu: add interrupt work handler for smu11 parts
drm/amdgpu/swsmu: add interrupt work function
...
Create new debugfs entry to print memory info using VM buffer
objects.
V2: Added Common function for printing BO info.
Dump more VM lists for evicted, moved, relocated, invalidated.
Removed dumping VM mapped BOs.
V3: Fixed coding style comments, renamed print API and variables.
V4: Fixed coding style comments.
Signed-off-by: Mihir Bhogilal Patel <Mihir.Patel@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Current code wrongly treat all cases as job == NULL.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-and-tested-by: Jane Jian <Jane.Jian@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Support to load RLC iram and dram ucode when RLC firmware struct use v2.2
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add function for sienna_cichlid to force PBB workload mode to zero by
checking whether there have SE been harvested.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 39ad082459.
TDR issue has been resovled by pmfw update.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Disable/enable the GPO feature on UMD pstate entering/exiting.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fulfill Navi gfx and pcie settings on umd pstate switching.
V2: temporarily skip the pcie ASPM setting considering the ASPM function
is not fully enabled yet
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Support NAVI10 ASPM setting.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For entering UMD stable Pstate, the operations to enter rlc_safe
mode, disable mgcg_perfmon and disable PCIE aspm are needed. And
the opposite operations should be performed on UMD stable Pstate
exiting.
V2: take those ASICs(CI/SI/VI) which may not support this into
consideration
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Populate current link speed, width and clock domain frequency.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As for other clock domains.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch fixes the gfx hang while use firmware direct loading mode.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Representative checkpatch.pl warning
WARNING: adding a line without newline at end of file
30: FILE: drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.h:30:
+#endif
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Forcing mocs:1 [used for our winsys follows-pte mode] to be cached
caused display glitches. Though it is documented as deprecated (and so
likely behaves as uncached) use the follow-pte bit and force it out of
L3 cache.
Fixes: 4d8a5cfe3b ("drm/i915/gt: Initialize reserved and unspecified MOCS indices")
Testcase: igt/kms_frontbuffer_tracking
Testcase: igt/kms_big_fb
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ayaz A Siddiqui <ayaz.siddiqui@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201015122138.30161-4-chris@chris-wilson.co.uk
Since SKL the eLLC has been sitting on the far side of the system
agent, meaning the display engine can utilize it. Let's enable that.
I chose WB for the caching mode, because my numbers are indicating
that WT might actually be WB and WC might actually be UC. I'm not
100% sure that is indeed the case but at least my simple rendercopy
based benchmark didn't see any difference in performance.
Also if I configure things to do LLCeLLC+WT I still get cache dirt
on my screen, suggesting that is in fact operating in WB mode
anyway. This is also the reason I had to fix the MOCS target cache
to really say PTE rather than LLC+eLLC.
Since SKL the eLLC has been sitting on the far side of the system agent,
meaning the display engine can utilize it. Let's enable that.
Eero's earlier benchmarks numbers:
"* Results in GfxBench and Unigine (Valley/Heaven) tests were within daily
variation on the tested SKL machines
* SKL GT4e (128MB eLLC) / Wayland / Weston:
+15-20% SynMark TexMem512 (512MB of textures)
+4-6% SynMark TerrainFly*, CSCloth, ShMapVsm
-5-10% SynMark TexMem128 (128MB of textures)
* SKL GT3e (64MB eLLC) / Xorg / Unity:
+4-8% GpuTest Triangle fullscreen (FullHD)
-5-10% GpuTest Triangle windowed (1/2 screen)
* SKL GT2 (no eLLC) / Xorg / Unity:
* Some of the higher FPS SynMark pixel and vertex shader tests
are few percent higher, more than daily variance
=> Do you see any reason why this machine would be impacted
although it doesn't eLLC?"
Caveats:
- Still haven't tested with a prime setup
- Still not entirely sure this a good idea, but I've been
using it on my cfl anyway :)
v2: Split the MOCS PTE change out
Cc: Eero Tamminen <eero.t.tamminen@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201007120329.17076-3-ville.syrjala@linux.intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20201015122138.30161-3-chris@chris-wilson.co.uk
Currently we leave the cache_level of the initial fb obj
set to NONE. This means on eLLC machines the first pin_to_display()
will try to switch it to WT which requires a vma unbind+bind.
If that happens during the fbdev initialization rcu does not
seem operational which causes the unbind to get stuck. To
most appearances this looks like a dead machine on boot.
Avoid the unbind by already marking the object cache_level
as WT when creating it. We still do an excplicit ggtt pin
which will rewrite the PTEs anyway, so they will match whatever
cache level we set.
Cc: <stable@vger.kernel.org> # v5.7+
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2381
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201007120329.17076-1-ville.syrjala@linux.intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20201015122138.30161-1-chris@chris-wilson.co.uk
Changing the caching on the fly never really worked
flawlessly.
So stop this completely and just let drivers specific the
desired caching in the tt or bus object.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patchwork.freedesktop.org/patch/394256/
Instead of the placement flags use the caching of the bus
mapping or tt object for the page protection flags.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patchwork.freedesktop.org/patch/394255/
And implement setting it up correctly in the drivers.
This allows getting rid of the placement flags for this.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patchwork.freedesktop.org/patch/394254/
All drivers can determine the tt caching state at creation time,
no need to do this on the fly during every validation.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patchwork.freedesktop.org/patch/394253/
Novatek NT36672a is a generic DSI IC that drives command and video mode
panels. Add the driver for it.
Right now adding support for some Poco F1 phones that have an LCD panel
from Tianma connected with this IC, with a resolution of 1080x2246 that
operates in DSI video mode.
During testing, Benni Steini <bennisteinir@gmail.com> helped us fix
the reset sequence timing (from 10ms to 20ms), to get the bootanimation
to work on Android.
With current AOSP, we need to increase it to 200ms - this seems to be a
safe high value to avoid a white screen occasionally.
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Benni Steini <bennisteinir@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200902064407.30712-3-sumit.semwal@linaro.org
Here is the big set of tty and serial driver patches for 5.10-rc1.
Lots of little things in here, including:
- tasklet_setup api conversions
- sysrq support for capital letters
- vt and vc cleanups and unwinding the mess some more
- serial driver updates and minor tweaks
- new device ids
- rs485 support for some drivers
- serial binding documentation updates
- lots of small serial driver changes for reported issues
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX4c5vA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykVRACfWQRqsz/IIs6MZsDY9dkj4+QVUWAAn0mN2uHR
mBox8w4TdTfG96jFXSfF
=WYKP
-----END PGP SIGNATURE-----
Merge tag 'tty-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH:
"Here is the big set of tty and serial driver patches for 5.10-rc1.
Lots of little things in here, including:
- tasklet_setup api conversions
- sysrq support for capital letters
- vt and vc cleanups and unwinding the mess some more
- serial driver updates and minor tweaks
- new device ids
- rs485 support for some drivers
- serial binding documentation updates
- lots of small serial driver changes for reported issues
All have been in linux-next for a while with no reported issues"
* tag 'tty-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits)
serial: mcf: add sysrq capability
serial: fsl_lpuart: add sysrq support when using dma
fbcon: remove no-op fbcon_set_origin()
tty/sysrq: Extend the sysrq_key_table to cover capital letters
serial: max310x: rework RX interrupt handling
serial: 8250_dw: Fix clk-notifier/port suspend deadlock
serial: 8250: Skip uninitialized TTY port baud rate update
serial: 8250: Discard RTS/DTS setting from clock update method
tty: serial: imx: disable TXDC IRQ in imx_uart_shutdown() to avoid IRQ storm
serial: 8250_fsl: Fix TX interrupt handling condition
serial: pl011: Fix lockdep splat when handling magic-sysrq interrupt
tty: serial: fsl_lpuart: fix lpuart32_poll_get_char
tty: serial: lpuart: fix lpuart32_write usage
serial: qcom_geni_serial: To correct QUP Version detection logic
serial: mvebu-uart: fix unused variable warning
vt_ioctl: make VT_RESIZEX behave like VT_RESIZE
serial: mvebu-uart: simplify the return expression of mvebu_uart_probe()
tty: serial: imx: fix link error with CONFIG_SERIAL_CORE_CONSOLE=n
tty: hvc: fix link error with CONFIG_SERIAL_CORE_CONSOLE=n
pch_uart: drop double zeroing
...
Now that we use kvmalloc for the crat_image, we need to use kvfree when
we destroy this.
Fixes: d0e63b343e ("drm/amdkfd: Use kvmalloc instead of kmalloc for VCRAT")
Reported-by: Morris Zhang <shiwu.zhang@amd.clm>
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Synchronize the ring usage for vcn1 and jpeg1 to workaround a hardware bug.
Signed-off-by: Veerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
To avoid underflow seen on Polaris10 with some 3440x1440
144Hz displays. As the threshold of 190 us cuts too close
to minVBlankTime of 192 us.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
As warned when running "make htmldocs":
./drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:345: warning: Function parameter or member 'force_timing_sync' not described in 'amdgpu_display_manager'
This new struct member was not documented at kernel-doc markup.
Fixes: 3d4e52d0cf ("drm/amd/display: Add debugfs for forcing stream timing sync")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GPU reset might get called during init time, before
sw_init has been called.
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It was recently introduced a change that enables driver to disable
streams if pixel clock changes. Consequently, the code path executed in
the disable vbios function expanded to an encoder verification part.
The encoder loop is nested inside the pipe count loop, and both loops
share the 'i' variable in control of their flow. This situation may lead
to an infinite loop because the encoder loop constantly updates the `i`
variable, making the first loop always positive. As a result, we can see
a soft hang during the module load (modprobe amdgpu) and a series of
dmesg log that looks like this:
kernel:[ 124.538727] watchdog: BUG: soft lockup - CPU#2 stuck for 22s!
[modprobe:1000]
RSP: 0018:ffffabbf419bf0e8 EFLAGS: 00000282
RAX: ffffffffc0809de0 RBX: ffff93b35ccc0000 RCX: ffff93b366c21800
RDX: 0000000000000000 RSI: 0000000000000141 RDI: ffff93b35ccc0000
RBP: ffffabbf419bf108 R08: ffffabbf419bf164 R09: 0000000000000001
R10: 0000000000000003 R11: 0000000000000003 R12: 0000000008677d40
R13: 0000000000000141 R14: ffff93b35cfc0000 R15: ffff93b35abc0000
FS: 00007f1400717540(0000) GS:ffff93b37f680000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005649b66b0968 CR3: 00000003e0fec000 CR4: 0000000000350ee0
Call Trace:
amdgpu_device_rreg+0x17/0x20 [amdgpu]
amdgpu_cgs_read_register+0x14/0x20 [amdgpu]
dm_read_reg_func+0x3a/0xb0 [amdgpu]
get_pixel_clk_frequency_100hz+0x30/0x50 [amdgpu]
dc_commit_state+0x8f1/0xae0 [amdgpu]
? drm_calc_timestamping_constants+0x101/0x160 [drm]
amdgpu_dm_atomic_commit_tail+0x39d/0x21a0 [amdgpu]
? dcn21_validate_bandwidth+0xe5/0x290 [amdgpu]
? kfree+0xc3/0x390
? dcn21_validate_bandwidth+0xe5/0x290 [amdgpu]
...
RSP: 002b:00007fff26009bd8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 000055a8025bea50 RCX: 00007f140085c89d
RDX: 0000000000000000 RSI: 000055a8025b8290 RDI: 000000000000000c
RBP: 0000000000040000 R08: 0000000000000000 R09: 0000000000000000
R10: 000000000000000c R11: 0000000000000246 R12: 000055a8025b8290
R13: 0000000000000000 R14: 000055a8025bead0 R15: 000055a8025bea50
This issue was fixed by introducing a second variable for the internal
loop.
Fixes: 8353d30e74 ("drm/amd/display: disable stream if pixel clock changed with link active")
Reviewed-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix this to avoid build problems if DRM_AMD_DC_DCN3_02 is defined, but
DRM_AMD_DC_DCN3_01 is not.
Fixes: 36d26912e8 ("drm/amd/display: Add support for DCN302 (v2)")
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Now that we use kvmalloc for the crat_image, we need to use kvfree when
we destroy this.
Fixes: d0e63b343e ("drm/amdkfd: Use kvmalloc instead of kmalloc for VCRAT")
Reported-by: Morris Zhang <shiwu.zhang@amd.clm>
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Synchronize the ring usage for vcn1 and jpeg1 to workaround a hardware bug.
Signed-off-by: Veerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add mp0 11_0_12 for dimgrey_cavefish to the mem training
supported list, otherwise the modeprobe would fail
on dimgrey_cavefish with latest vbios.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The driver needn't load smu binary on APU platforms.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Madhav Chauhan <madhav.chauhan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To avoid underflow seen on Polaris10 with some 3440x1440
144Hz displays. As the threshold of 190 us cuts too close
to minVBlankTime of 192 us.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As warned when running "make htmldocs":
./drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:345: warning: Function parameter or member 'force_timing_sync' not described in 'amdgpu_display_manager'
This new struct member was not documented at kernel-doc markup.
Fixes: 3d4e52d0cf ("drm/amd/display: Add debugfs for forcing stream timing sync")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Functions (disable_all_writeback_pipes_for_stream &
dc_enable_stereo & dc_post_update_surfaces_to_stream)
always return true, there is no need to keep the return value.
This change is to make the code a bit more readable.
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drivers/gpu/drm/amd/amdgpu/amdgpu_pmu.c:608:2-3: Unneeded semicolon
Remove unneeded semicolon.
Generated by: scripts/coccinelle/misc/semicolon.cocci
Fixes: b4a7db71ea ("drm/amdgpu: add per device user friendly xgmi events for vega20")
CC: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GPU reset might get called during init time, before
sw_init has been called.
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Most of the changes are cleanups and reorganization to make the objtool code
more arch-agnostic. This is in preparation for non-x86 support.
Fixes:
- KASAN fixes.
- Handle unreachable trap after call to noreturn functions better.
- Ignore unreachable fake jumps.
- Misc smaller fixes & cleanups.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=KX5o
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2020-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
"Most of the changes are cleanups and reorganization to make the
objtool code more arch-agnostic. This is in preparation for non-x86
support.
Other changes:
- KASAN fixes
- Handle unreachable trap after call to noreturn functions better
- Ignore unreachable fake jumps
- Misc smaller fixes & cleanups"
* tag 'objtool-core-2020-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
perf build: Allow nested externs to enable BUILD_BUG() usage
objtool: Allow nested externs to enable BUILD_BUG()
objtool: Permit __kasan_check_{read,write} under UACCESS
objtool: Ignore unreachable trap after call to noreturn functions
objtool: Handle calling non-function symbols in other sections
objtool: Ignore unreachable fake jumps
objtool: Remove useless tests before save_reg()
objtool: Decode unwind hint register depending on architecture
objtool: Make unwind hint definitions available to other architectures
objtool: Only include valid definitions depending on source file type
objtool: Rename frame.h -> objtool.h
objtool: Refactor jump table code to support other architectures
objtool: Make relocation in alternative handling arch dependent
objtool: Abstract alternative special case handling
objtool: Move macros describing structures to arch-dependent code
objtool: Make sync-check consider the target architecture
objtool: Group headers to check in a single list
objtool: Define 'struct orc_entry' only when needed
objtool: Skip ORC entry creation for non-text sections
objtool: Move ORC logic out of check()
...
Recently we came across requirement to identify EHL and JSL
platform to program them differently. Thus Split the basic
platform definition, macros, and PCI IDs to differentiate
between EHL and JSL platforms. Also, IS_ELKHARTLAKE is replaced
with IS_JSL_EHL everywhere.
Changes since V1 :
- Rebased to avoid merge conflicts
- Added missed check for jasperlake in intel_uc_fw.c
Cc : Matt Roper <matthew.d.roper@intel.com>
Cc : Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201013192948.63470-1-tejaskumarx.surendrakumar.upadhyay@intel.com
There is import_uuid() function which imports u8 array to the uuid_t.
Use it instead of open coding variant.
This allows to hide the uuid_t internals.
Reviewed-by: David Stevens <stevensd@chromium.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20201013132714.70973-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
i915 does not want to see value entries. Switch it to use
find_lock_page() instead, and remove the export of find_lock_entry().
Move find_lock_entry() and find_get_entry() to mm/internal.h to discourage
any future use.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Link: https://lkml.kernel.org/r/20200910183318.20139-6-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In support of device-dax growing the ability to front physically
dis-contiguous ranges of memory, update devm_memremap_pages() to track
multiple ranges with a single reference counter and devm instance.
Convert all [devm_]memremap_pages() users to specify the number of ranges
they are mapping in their 'struct dev_pagemap' instance.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: "Jérôme Glisse" <jglisse@redhat.co
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brice Goglin <Brice.Goglin@inria.fr>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Hulk Robot <hulkci@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Yan <yanaijie@huawei.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Jia He <justin.he@arm.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/159643103789.4062302.18426128170217903785.stgit@dwillia2-desk3.amr.corp.intel.com
Link: https://lkml.kernel.org/r/160106116293.30709.13350662794915396198.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The 'struct resource' in 'struct dev_pagemap' is only used for holding
resource span information. The other fields, 'name', 'flags', 'desc',
'parent', 'sibling', and 'child' are all unused wasted space.
This is in preparation for introducing a multi-range extension of
devm_memremap_pages().
The bulk of this change is unwinding all the places internal to libnvdimm
that used 'struct resource' unnecessarily, and replacing instances of
'struct dev_pagemap'.res with 'struct dev_pagemap'.range.
P2PDMA had a minor usage of the resource flags field, but only to report
failures with "%pR". That is replaced with an open coded print of the
range.
[dan.carpenter@oracle.com: mm/hmm/test: use after free in dmirror_allocate_chunk()]
Link: https://lkml.kernel.org/r/20200926121402.GA7467@kadam
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> [xen]
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brice Goglin <Brice.Goglin@inria.fr>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Hulk Robot <hulkci@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Yan <yanaijie@huawei.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Jia He <justin.he@arm.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/159643103173.4062302.768998885691711532.stgit@dwillia2-desk3.amr.corp.intel.com
Link: https://lkml.kernel.org/r/160106115761.30709.13539840236873663620.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCX4VPpAAKCRDj7w1vZxhR
xWX9AQCl1ePD7dbcLVMTcZYKVaQk55rFayqkscxuiSbCfbaNEgEAj03vDvkQdJ7O
dZrCcQTBnsvVJt6B2e82Pnax0rwWkgI=
=wqMd
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-fixes-2020-10-13' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
One fix for a bad revert in ingenic-drm, and one fix for panfrost to increase a timeout at power up.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201013065709.lwjw3fthoxwsbqsl@gilmour.lan
-----BEGIN PGP SIGNATURE-----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=bQuH
-----END PGP SIGNATURE-----
Merge tag 'media/v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- the usbvision driver was dropped from staging
- the Zoran driver were re-added at staging. It gained lots of
improvements, and was converted to use videobuf2 API
- a new virtual driver (vidtv) was added in order to allow testing the
digital TV framework and APIs
- the media uAPI documentation gained a glossary with commonly used
terms, helping to simplify some parts of the docs
- more cleanups at the atomisp driver
- Mediatek VPU gained support for MT8183
- added support for codecs with supports doing colorspace conversion
(CSC)
- support for CSC API was added at vivid and rksip1 drivers
- added a helper core support and uAPI for better supporting H.264
codecs
- added support for Renesas R8A774E1
- use the new SPDX GFDL-1.1-no-invariants-or-later license on media
uAPI docs, instead of a license text
- Venus driver has gained VP9 codec support
- lots of other cleanups and driver improvements
* tag 'media/v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (555 commits)
media: dvb-frontends/drxk_hard.c: fix uninitialized variable warning
media: tvp7002: fix uninitialized variable warning
media: s5k5baf: drop 'data' field in struct s5k5baf_fw
media: dt-bindings: media: venus: Add an optional power domain for perf voting
media: rcar-vin: rcar-dma: Fix setting VNIS_REG for RAW8 formats
media: staging: rkisp1: uapi: Do not use BIT() macro
media: v4l2-mem2mem: Fix spurious v4l2_m2m_buf_done
media: usbtv: Fix refcounting mixup
media: zoran.rst: place it at the right place this time
media: add Zoran cardlist
media: admin-guide: update cardlists
media: siano: rename a duplicated card string
media: zoran: move documentation file to the right place
media: atomisp: fixes build breakage for ISP2400 due to a cleanup
media: zoran: fix mixed case on vars
media: zoran: get rid of an unused var
media: zoran: use upper case for card types
media: zoran: fix sparse warnings
media: zoran: fix smatch warning
media: zoran: update TODO
...
In order to avoid functional breakage of mis-programmed applications that
have grown to depend on unused MOCS entries, we are programming
those entries to be equal to fully cached ("L3 + LLC") entry.
These reserved and unspecified entries should not be used as they may be
changed to less performant variants with better coherency in the future
if more entries are needed.
v2: As suggested by Lucas De Marchi to utilise __init_mocs_table for
programming default value, setting I915_MOCS_PTE index of tgl_mocs_table
with desired value.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Francisco Jerez <currojerez@riseup.net>
Cc: Mathew Alwin <alwin.mathew@intel.com>
Cc: Mcguire Russell W <russell.w.mcguire@intel.com>
Cc: Spruit Neil R <neil.r.spruit@intel.com>
Cc: Zhou Cheng <cheng.zhou@intel.com>
Cc: Benemelis Mike G <mike.g.benemelis@intel.com>
Signed-off-by: Ayaz A Siddiqui <ayaz.siddiqui@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200729102539.134731-2-ayaz.siddiqui@intel.com
Cc: stable@vger.kernel.org
BOE panel with ID 2270 claims both PWM_PIN_CAP and AUX_SET_CAP backlight
control bits, but default chip backlight failed to control brightness.
Check AUX_SET_CAP and proceed to check quirks or VBT backlight type.
DPCD can control the brightness of this pannel.
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201009085750.88490-1-aaron.ma@canonical.com
In commit 7994672309 ("drm/i915: Assume 100% brightness when not in
DPCD control mode"), we fixed the brightness level when DPCD control was
not active to max brightness. This is as good as we can guess since most
backlights go on full when uncontrolled.
However in doing so we changed the semantics of the initial
'backlight.enabled' value. At least on Pixelbooks, they were relying
on the brightness level in DP_EDP_BACKLIGHT_BRIGHTNESS_MSB to be 0 on
boot such that enabled would be false. This causes the device to be
enabled when the brightness is set. Without this, brightness control
doesn't work. So by changing brightness to max, we also flipped enabled
to be true on boot.
To fix this, make enabled a function of brightness and backlight control
mechanism.
Fixes: 7994672309 ("drm/i915: Assume 100% brightness when not in DPCD control mode")
Cc: Lyude Paul <lyude@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Kevin Chowski <chowski@chromium.org>>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200918002845.32766-1-sean@poorly.run
Fix a badly reverted commit. The revert commit was cherry-picked from
drm-misc-next to drm-misc-next-fixes, and in the process some unrelated
code was added.
Fixes: a3fb64c00d ("Revert "gpu/drm: ingenic: Add option to mmap GEM buffers cached"")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201012102509.10690-1-paul@crapouillou.net
When the number of potential color planes grew to 4 we stopped
setting all unused color plane offsets to ~0xfff. The code
still tries to do this, but actually does nothing since the
loop limits are bogus.
skl_check_main_surface() actually depends on this ~0xfff
behaviour as it will make sure to move the main surface
offset below the aux surface offset because the hardware
AUX_DIST must be a non-negative value [1], and for simplicity
it doesn't bother checking if the AUX plane is actually
needed or not. So currently it may end up shuffling the
main surface around based on some stale leftover AUX offset.
The skl+ plane code also just blindly calculates the AUX_DIST
whether or not the AUX plane is actually needed by the hw or
not, and that too will now potentially use some stale AUX
surface offset in the calculation. Would seem nicer to
guarantee a consistent non-negative AUX_DIST always.
So bring back the original ~0xfff offset behaviour for
unused color planes. Though it doesn't seem super likely
that this inconsistency would cause any real issues.
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Fixes: 2dfbf9d287 ("drm/i915/tgl: Gen-12 display can decompress surfaces compressed by the media engine")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201008101608.8652-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit 79148ce4b2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The HDMI vs. not-HDMI check got inverted whem the bogus encoder->type
checks were eliminated. So now we're using 0 as the link rate on DP
and potentially non-zero on HDMI, which is exactly the opposite of
what we want. The original bogus check actually worked more correctly
by accident since if would always evaluate to true. Due to this we
now always use the RBR/HBR1 vswing table and never ever the HBR2+
vswing table. That is probably not a good way to get a high quality
signal at HBR2+ rates. Fix the check so we pick the right table.
Cc: stable@vger.kernel.org
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Fixes: 94641eb6c6 ("drm/i915/display: Fix the encoder type check")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200930223642.28565-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
(cherry picked from commit 945b18fb48)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
- Make all debug object descriptors constant. There is no reason to have
them writeable.
- Free the per CPU object pool after CPU unplug to avoid memory waste.
-----BEGIN PGP SIGNATURE-----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=BP3+
-----END PGP SIGNATURE-----
Merge tag 'core-debugobjects-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull debugobjects updates from Thomas Gleixner:
"A small set of updates for debug objects:
- Make all debug object descriptors constant. There is no reason to
have them writeable.
- Free the per CPU object pool after CPU unplug to avoid memory
waste"
* tag 'core-debugobjects-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
debugobjects: Free per CPU pool after CPU unplug
treewide: Make all debug_obj_descriptors const
debugobjects: Allow debug_obj_descr to be const
Display Manager support for green_sardine
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Display Core support for green_sardine
Signed-off-by: Roman Li <Roman.Li@amd.com>
Acked-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add DM block support for dimgrey_cavefish.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Jack Gui <Jack.Gui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dimgrey_cavefish has no ASD ucode currently, remove its initialization.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Jack Gui <Jack.Gui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Per PMFW 59.7.0.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove gpu_info fw support for dimgrey_cavefish, gpu info can be got
from ip discovery.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set ih CG flag for dimgrey_cavefish.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set hdp CG and LS flag for dimgrey_cavefish.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add psp and smu block for dimgrey_cavefish with psp firmware load type.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by:Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update driver if version from 0x5 to 0x6 for dimgrey_cavefish, per PMFW 59.04.0.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable jpeg3.0 ip block for dimgrey_cavefish.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable vcn3.0 ip block for dimgrey_cavefish.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update driver if version from 0x4 to 0x5 for dimgrey_cavefish, per PMFW 59.02.0.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set athub/mmhub PG flag for dimgrey_cavefish.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set mc CG and LS flag for dimgrey_cavefish.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable GFX MGCG, CGCG and 3DCG for dimgrey_cavefish.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update driver if version according to PMFW with version 0x003B0100.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Same as navy_flounder, the athub ip of dimgrey_cavefish is v2.1.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Support both back and front door loading for dimgrey_cavefish.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable JPEG3.0 PG and CG for dimgrey_cavefish.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable VCN3.0 PG and CG for dimgrey_cavefish
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add KFD support for dimgrey cavefish.
v2: rebase (Alex)
Signed-off-by: Chengming Gui <Jack.Gui@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Same as sienna_cichlid, dimgrey_cavefish supports WAIT_REG_MEM packet.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add check before reroute ih setting, it's not supported by some ASICs.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
General psp support for dimgrey_cavefish.
v2: remove the checks for asd load and reroute ih.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Increase fw_name string size so longer chip name can be stored.
v2: define macro for the length of psp fw name.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A longer chip name needs more space.
v2: define macro for the length of smu fw name
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The athub version for dimgrey_cavefish is v2.1.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable VCN DPG mode for dimgrey_cavefish.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add firmware support for dimgrey_cavefish.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
pa_sc_tile_steering_override is only programmable for gfx10.0/10.1/10.2, the same as sienna_cichlid.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The gfx version of dimgrey_cavefish is 10.3, identical to sienna_cichlid, follow the way
of sienna_cichlid.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable sdma block for dimgrey_cavefish, same as sienna_cichlid.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable gfx block for dimgrey_cavefish, same as navy_flounder.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable ih block for dimgrey_cavefish, same as navy_flounder.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable gmc block for dimgrey_cavefish, same as sienna_cichlid.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Same as navy_flounder.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Same as navy_flounder.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add ip offset definition for dimgrey_cavefish and initialize it.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add external id and set clock gating for dimgrey_cavefish.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Same as navy_flounder.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Same as navi series.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use direct load for dimgrey_cavefish.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It was recently introduced a change that enables driver to disable
streams if pixel clock changes. Consequently, the code path executed in
the disable vbios function expanded to an encoder verification part.
The encoder loop is nested inside the pipe count loop, and both loops
share the 'i' variable in control of their flow. This situation may lead
to an infinite loop because the encoder loop constantly updates the `i`
variable, making the first loop always positive. As a result, we can see
a soft hang during the module load (modprobe amdgpu) and a series of
dmesg log that looks like this:
kernel:[ 124.538727] watchdog: BUG: soft lockup - CPU#2 stuck for 22s!
[modprobe:1000]
RSP: 0018:ffffabbf419bf0e8 EFLAGS: 00000282
RAX: ffffffffc0809de0 RBX: ffff93b35ccc0000 RCX: ffff93b366c21800
RDX: 0000000000000000 RSI: 0000000000000141 RDI: ffff93b35ccc0000
RBP: ffffabbf419bf108 R08: ffffabbf419bf164 R09: 0000000000000001
R10: 0000000000000003 R11: 0000000000000003 R12: 0000000008677d40
R13: 0000000000000141 R14: ffff93b35cfc0000 R15: ffff93b35abc0000
FS: 00007f1400717540(0000) GS:ffff93b37f680000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005649b66b0968 CR3: 00000003e0fec000 CR4: 0000000000350ee0
Call Trace:
amdgpu_device_rreg+0x17/0x20 [amdgpu]
amdgpu_cgs_read_register+0x14/0x20 [amdgpu]
dm_read_reg_func+0x3a/0xb0 [amdgpu]
get_pixel_clk_frequency_100hz+0x30/0x50 [amdgpu]
dc_commit_state+0x8f1/0xae0 [amdgpu]
? drm_calc_timestamping_constants+0x101/0x160 [drm]
amdgpu_dm_atomic_commit_tail+0x39d/0x21a0 [amdgpu]
? dcn21_validate_bandwidth+0xe5/0x290 [amdgpu]
? kfree+0xc3/0x390
? dcn21_validate_bandwidth+0xe5/0x290 [amdgpu]
...
RSP: 002b:00007fff26009bd8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 000055a8025bea50 RCX: 00007f140085c89d
RDX: 0000000000000000 RSI: 000055a8025b8290 RDI: 000000000000000c
RBP: 0000000000040000 R08: 0000000000000000 R09: 0000000000000000
R10: 000000000000000c R11: 0000000000000246 R12: 000055a8025b8290
R13: 0000000000000000 R14: 000055a8025bead0 R15: 000055a8025bea50
This issue was fixed by introducing a second variable for the internal
loop.
Fixes: 8353d30e74 ("drm/amd/display: disable stream if pixel clock changed with link active")
Reviewed-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These function pointers are missing from dcn30_init
.calc_vupdate_position : Used to help avoid cursor stuttering
.set_pipe : Needed for setting ABM
So add them
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
devices which doesn't need pinning of pages for DMA anymore. Add support
for the command submission to devices using new x86 instructions like
ENQCMD{,S} and MOVDIR64B. In addition, add support for process address
space identifiers (PASIDs) which are referenced by those command
submission instructions along with the handling of the PASID state on
context switch as another extended state. Work by Fenghua Yu, Ashok Raj,
Yu-cheng Yu and Dave Jiang.
-----BEGIN PGP SIGNATURE-----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=K9X4
-----END PGP SIGNATURE-----
Merge tag 'x86_pasid_for_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 PASID updates from Borislav Petkov:
"Initial support for sharing virtual addresses between the CPU and
devices which doesn't need pinning of pages for DMA anymore.
Add support for the command submission to devices using new x86
instructions like ENQCMD{,S} and MOVDIR64B. In addition, add support
for process address space identifiers (PASIDs) which are referenced by
those command submission instructions along with the handling of the
PASID state on context switch as another extended state.
Work by Fenghua Yu, Ashok Raj, Yu-cheng Yu and Dave Jiang"
* tag 'x86_pasid_for_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Add an enqcmds() wrapper for the ENQCMDS instruction
x86/asm: Carve out a generic movdir64b() helper for general usage
x86/mmu: Allocate/free a PASID
x86/cpufeatures: Mark ENQCMD as disabled when configured out
mm: Add a pasid member to struct mm_struct
x86/msr-index: Define an IA32_PASID MSR
x86/fpu/xstate: Add supervisor PASID state for ENQCMD
x86/cpufeatures: Enumerate ENQCMD and ENQCMDS instructions
Documentation/x86: Add documentation for SVA (Shared Virtual Addressing)
iommu/vt-d: Change flags type to unsigned int in binding mm
drm, iommu: Change type of pasid to u32
The DP Standard's recommendation is to use the LTTPR non-transparent
mode link training if LTTPRs are detected, so let's do this.
Besides power-saving, the advantages of this are that the maximum number
of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in
transparent mode), and it provides a way to narrow down the reason for a
link training failure to a given link segment. Non-transparent mode is
probably also the mode that was tested the most by the industry.
The changes in this patchset:
- Pass the DP PHY that is currently link trained to all LT helpers, so
that these can access the correct LTTPR/DPRX DPCD registers.
- During LT take into account the LTTPR common lane rate/count and the
per LTTPR-PHY vswing/pre-emph limits.
- Switch to LTTPR non-transparent LT mode and train each link segment
according to the sequence in DP Standard v2.0 (complete CR/EQ for
each segment before continuing with the next segment).
v2:
- Switch to non-transparent mode during connector detection, which is
required before reading the per-PHY LTTPR capabilities.
- Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville)
- Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the
same logic to intel_dp_get_link_status(). (Ville)
- Make intel_dp_lttpr_phy_caps() return a pointer to the whole array
instead of a pointer to its first element. (Ville)
- Add the intel_dp_phy_is_downstream_of_source() helper. (Ville)
- Add a code comment about the disable->enable quirk of
non-transparent mode.
- Add the intel_dp_training_pattern_set_reg() helper.
- Fix checkpatch/sparse warns.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
By default LTTPRs should be in transparent link training mode,
nevertheless in this patch we switch to this default mode explicitly.
The DP Standard recommends this, supposedly because an LTTPR may be left
in the non-transparent mode (by BIOS, previous kernel, or after reset
due to a firmware bug). I haven't seen this happening, but let's follow
the DP Standard.
v2:
- Add a code comment about the explicit disabling of non-transparent
mode.
v3:
- Move check to prevent initing LTTPRs on eDP to init_dp_lttpr_init().
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-6-imre.deak@intel.com
Add the helpers and register definitions needed to read out the common
and per-PHY LTTPR capabilities and perform link training in the LTTPR
non-transparent mode.
v2:
- Add drm_dp_dpcd_read_phy_link_status() and DP_PHY_LTTPR() here instead
of adding these to i915. (Ville)
v3:
- Use memmove() to convert LTTPR to DPRX link status format. (Ville)
Cc: dri-devel@lists.freedesktop.org
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-5-imre.deak@intel.com
To prepare for a follow-up LTTPR change factor out a helper to disable
the training pattern in DPCD. We'll need to do this for each LTTPR
(without programming the port to output the idle pattern) when training
in LTTPR non-transparent mode.
While at it also move the disable-link-training logic from
intel_dp_set_link_train() to intel_dp_stop_link_train(), since the
latter is the only user of this.
v2:
- Move the disable-link-training logic to intel_dp_stop_link_train()
(Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-4-imre.deak@intel.com
Split the prepare, link training, fallback-handling steps into their own
functions for clarity and as a preparation for the upcoming LTTPR
changes.
While at it also:
- Unexport and inline intel_dp_set_idle_link_train(), which is used at a
single place.
- Add some documentation to functions that are exported or that can use
a better description about which part of the LT sequence they
implement.
v2: (Ville)
- Unexport/inline intel_dp_set_idle_link_train()
- Make the documentation of
intel_dp_prepare_link_train()/intel_dp_stop_link_train() more accurate
wrt. HW specific details.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-3-imre.deak@intel.com
An LTTPR can be trained with training pattern 4 even if the DPCD
revision is < 1.4, but drm_dp_training_pattern_mask() would change
pattern 4 to pattern 3 on those DPCD revisions.
Since intel_dp_training_pattern() makes already sure that the proper
training pattern is used, all that needs to be masked out is the
scrambling disable flag, which is or'd to the mask later based on the
training pattern.
v2:
- Use a helper instead of open-coding the masking. (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-2-imre.deak@intel.com
Kernel test robot reported build errors (undefined references)
that didn't make much sense. After reproducing them, there is also
a Kconfig warning that is the root cause of the build errors, so
fix that Kconfig problem.
Fixes this Kconfig warning:
WARNING: unmet direct dependencies detected for CMA
Depends on [n]: MMU [=n]
Selected by [m]:
- DRM_ASPEED_GFX [=m] && HAS_IOMEM [=y] && DRM [=m] && OF [=y] && (COMPILE_TEST [=y] || ARCH_ASPEED) && HAVE_DMA_CONTIGUOUS [=y]
and these dependent build errors:
(.text+0x10c8c): undefined reference to `start_isolate_page_range'
microblaze-linux-ld: (.text+0x10f14): undefined reference to `test_pages_isolated'
microblaze-linux-ld: (.text+0x10fd0): undefined reference to `undo_isolate_page_range'
Fixes: 76356a966e ("drm: aspeed: Clean up Kconfig options")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: linux-mm@kvack.org
Cc: linux-aspeed@lists.ozlabs.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://patchwork.freedesktop.org/patch/msgid/20201011230131.4922-1-rdunlap@infradead.org
Signed-off-by: Joel Stanley <joel@jms.id.au>
- Fix CRTC state checker (Ville)
Propated from drm-intel-gt-next:
- Avoid implicit vmpa for highmem on 32b (Chris)
- Prevent PAT attriutes for writecombine if CPU doesn't support PAT (Chris)
- Clear the buffer pool age before use. (Chris)
- Fix error code (Dan)
- Break up error capture compression loops (Chris)
- Fix uninitialized variable in context_create_request (Maarten)
- Check for errors on i915_vm_alloc_pt_stash to avoid NULL dereference (Matt)
- Serialize debugfs i915_gem_objects with ctx->mutex (Chris)
- Fix a rebase mistake caused during drm-intel-gt-next creation (Chris)
- Hold request reference for canceling an active context (Chris)
- Heartbeats fixes (Chris)
- Use usigned during batch copies (Chris)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAl93cBoACgkQ+mJfZA7r
E8q8pQf+KvebXTbfD217OMONXqPt0+EC85hqA1LHmMq0E4W/qh2XjO242bdNq9oJ
qLd6YxKOXcWHxlDn1dlPTGOAbpDWeTT228QfC/vQMyvHnWX00J1EXoXnl14gHs7w
rYUdpdmC0qW5W5oJjdUU1P3EprahmOr0XNTOURS8fiylZBo8vTm4H3kB4iVsLSrT
zpUOthQ3PomnOUTeSQVDeYFgT5+S79qguUq9u27DBj+kKwrdx3IeAMHHEtXzg2JD
AmKgjRxH5PyZny9roCoKhm/aA3Zx32CXZI/zW84sKg9/ryh3SGHbIwJbTRaNX8ub
qheu87bWxm1v0a/7ZUr0Frb7tzXpAA==
=vULA
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-fixes-2020-10-02' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
Propagated from drm-intel-next-queued:
- Fix CRTC state checker (Ville)
Propated from drm-intel-gt-next:
- Avoid implicit vmpa for highmem on 32b (Chris)
- Prevent PAT attriutes for writecombine if CPU doesn't support PAT (Chris)
- Clear the buffer pool age before use. (Chris)
- Fix error code (Dan)
- Break up error capture compression loops (Chris)
- Fix uninitialized variable in context_create_request (Maarten)
- Check for errors on i915_vm_alloc_pt_stash to avoid NULL dereference (Matt)
- Serialize debugfs i915_gem_objects with ctx->mutex (Chris)
- Fix a rebase mistake caused during drm-intel-gt-next creation (Chris)
- Hold request reference for canceling an active context (Chris)
- Heartbeats fixes (Chris)
- Use usigned during batch copies (Chris)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201002182610.GA2204465@intel.com
We already have a private data member for maximum display width so
let's use it and get rid of the redundant tilcdc_crtc_max_width().
The LCDC version probing is moved to before reading the device tree
properties so that the version information is available when private
data maximum width is initialized, if "max-width" property is not
found.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/73683d2ce151cffb811a756595b02892eeac3d84.1602349100.git.jsarha@ti.com
The updated bspec forcewake table also provides us with new multicast
ranges that should be reflected in our workaround code.
Note that there are different types of multicast registers with
different styles of replication and different steering registers. The
i915 MCR range lists we're updating here are only used to ensure we can
verify workarounds properly (i.e., if we can't steer register reads we
don't want to verify workarounds where an unsteered read might hit a
fused-off instance of the unit). Because of this, we don't need to
include any of the multicast ranges where all instances of the register
will always present and fusing doesn't play a role. Specifically, that
means that we are not including the MCR ranges designated as "SQIDI" in
the bspec.
Bspec: 66696
Cc: Caz Yokoyama <caz.yokoyama@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201009194442.3668677-4-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
The bspec's forcewake page was very stale and out of date for recent
platforms. The hardware team finally provided us with an updated gen12
table (which applies to TGL, RKL, and DG1) and there are a lot of
changes.
v2:
- Add comments showing the subregions of ranges that we've combined for
ease of code review. (Jose)
- Rebase on the s/FORCEWAKE_BLITTER/FORCEWAKE_GT/ patch
Bspec: 66696
Cc: Caz Yokoyama <caz.yokoyama@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201009194442.3668677-3-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
The power well that we've been referring to as the 'blitter' well is
actually more of a general GT power well which contains a lot of things
other than the blitter engine registers. The FORCEWAKE_BLITTER name in
the code was used for historic reasons, but no longer matches how the
bspec describes this power well and just causes confusion for people not
familiar with this area of the code. Let's rename it to FORCEWAKE_GT to
more accurately describe the role of the power well and match how the
modern bspec refers to it.
v2:
- Add a comment noting that the GT power well includes the blitter
engine. (Jose)
Bspec: 66696, 66534, 67609
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201009194442.3668677-2-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Another step towards PSR2 selective fetch, here programming plane
selective fetch registers and MAN_TRK_CTL enabling selective fetch but
for now it is fetching the whole area of the planes.
The damaged area calculation will come as next and final step.
v2:
- removed warn on when no plane is visible in state
- removed calculations using plane damaged area in
intel_psr2_program_plane_sel_fetch()
v3:
- do not shift 16 positions the plane dst coordinates, only src is
shifted
v4:
- only setting PLANE_SEL_FETCH_CTL_ENABLE and MCURSOR_MODE in
PLANE_SEL_FETCH_CTL
v5:
- not masking bits for cursor
BSpec: 55229
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201007195238.53955-3-jose.souza@intel.com
Due to the debugfs flag, has_psr2 in CRTC state could have a different
value than psr.psr2_enabled and it was causing PSR2 subfeatures(DC3CO
and selective fetch) to be set to not a expected state.
So here only taking in consideration the parameter and debugfs flag
when computing PSR state, this way the CRTC state will also have
the correct state.
intel_psr_fastset_force() was already broken as
intel_psr_compute_config() was already only enabling PSR when
psr_global_enabled() and all other PSR requirements are met.
So some changes was required in this function, now it iterates over
all connectors, if it is a eDP connector and is active force a modeset
in the CRTC driving this connector, what will cause the new PSR state
to be set based on the debugfs flag.
v2:
- end connector iterator in error cases
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201007195238.53955-2-jose.souza@intel.com
For platforms without selective fetch this register is reserved so
do not write 0 to it.
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201007195238.53955-1-jose.souza@intel.com
This will remove the "Expected child device config size for VBT
version 235 not known" debug message seen in TGL, although this is not
fixing anything it good to keep our VBT parser updated.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201008211932.24989-2-jose.souza@intel.com
Child min_brightness is obsolete from VBT 234+, instead the new
min_brightness field in the main structure should be used.
This new field is 16 bits wide, so backlight_precision_bits is needed
to check if value needs to be scaled down but it is only available in
VBT 236+ so working around it by using the also new backlight_level
in the main struct.
v2:
- missed that backlight_data->level is also obsolete
v3:
- s/backlight/brightness to better match specification
- using u16 to specify brightness level instead of a u32 : 16
BSpec: 20149
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201008211932.24989-1-jose.souza@intel.com
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCX3bOIAAKCRDj7w1vZxhR
xVzcAPwNXvrMIukXSJsyHH/Vu00avUrwh/dgaNV2nMU3bqmWDAEAhNsdZPmdSva+
6rfry1bBUI4nTLgo7ac9PbCHyflw/QQ=
=zfJ7
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-fixes-2020-10-02' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
Three fixes for vc4 that addresses dual-display breakages
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201002065243.ry7gp4or3ywhluer@gilmour.lan
Fix follow warning:
Checking drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c...
[drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:770]: (error) Invalid number
of character '{' when these macros are defined: ''.
Checking drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c: CONFIG_ACPI...
[drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:770]: (error) Invalid number
of character '{' when these macros are defined: 'CONFIG_ACPI'.
......
Checking drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c: CONFIG_X86...
[drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:770]: (error) Invalid number
of character '{' when these macros are defined: 'CONFIG_X86'.
Checking drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c: _X86_...
[drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:770]: (error) Invalid number
of character '{' when these macros are defined: '_X86_'.
Checking drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c: __linux__...
[drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:770]: (error) Invalid number
of character '{' when these macros are defined: '__linux__'.
Fixes: 97d798b276 ("drm/amdgpu: simplify ATIF backlight handling")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove the virtual_display warning in drm_crtc_vblank_off when
dev->num_crtcs is null.
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Emily.Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As the dpm clock table is needed during DC HW initialization.
And that (DC HW initialization) comes before smu_late_init()
where current APU dpm clock table setup is performed. So, NULL
pointer dereference will be triggered. By moving APU dpm clock
table setup to smu_hw_init(), this can be avoided.
Fixes: 02cf91c113 ("drm/amd/powerplay: postpone operations not required for hw setup to late_init")
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reported-by: Dirk Gouders <dirk@gouders.net>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The default auto setting for kcq should not generate
a warning.
Fixes: a300de40f6 ("drm/amdgpu: introduce a new parameter to configure how many KCQ we want(v5)")
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We want to use the dev_* functions here rather than the pr_* variants.
Switch to using dev_warn() which mirrors what we do on other asics.
Fixes the following build errors on ARC:
../drivers/gpu/drm/amd/amdgpu/../powerplay/navi10_ppt.c: In function 'navi10_fill_i2c_req':
../arch/arc/include/asm/bug.h:24:2: error: implicit declaration of function 'pr_warn'; did you mean 'drm_warn'? [-Werror=implicit-function-declaration]
../drivers/gpu/drm/amd/amdgpu/../powerplay/sienna_cichlid_ppt.c: In function 'sienna_cichlid_fill_i2c_req':
../arch/arc/include/asm/bug.h:24:2: error: implicit declaration of function 'pr_warn'; did you mean 'drm_warn'? [-Werror=implicit-function-declaration]
Reported-by: kernel test robot <lkp@intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Evan Quan <evan.quan@amd.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: linux-snps-arc@lists.infradead.org
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This should be programmed with timing rather than with odm.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We will hang if we report switch in VACTIVE but not in VBLANK and DPG_EN = 1
[How]
Block switch in ACTIVE if not supported in BLANK
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix follow warning:
[drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.c:249]: (warning) %d in format
string (no. 1) requires 'int' but the argument type is 'unsigned int'.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix follow warning:
Checking drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c...
[drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:770]: (error) Invalid number
of character '{' when these macros are defined: ''.
Checking drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c: CONFIG_ACPI...
[drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:770]: (error) Invalid number
of character '{' when these macros are defined: 'CONFIG_ACPI'.
......
Checking drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c: CONFIG_X86...
[drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:770]: (error) Invalid number
of character '{' when these macros are defined: 'CONFIG_X86'.
Checking drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c: _X86_...
[drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:770]: (error) Invalid number
of character '{' when these macros are defined: '_X86_'.
Checking drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c: __linux__...
[drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:770]: (error) Invalid number
of character '{' when these macros are defined: '__linux__'.
Fixes: 97d798b276 ("drm/amdgpu: simplify ATIF backlight handling")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These were leftover from the initial implementation, but
never used. Drop them.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Noticed-by: Ryan Taylor <ryan.taylor@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As the dpm clock table is needed during DC HW initialization.
And that (DC HW initialization) comes before smu_late_init()
where current APU dpm clock table setup is performed. So, NULL
pointer dereference will be triggered. By moving APU dpm clock
table setup to smu_hw_init(), this can be avoided.
Fixes: 02cf91c113 ("drm/amd/powerplay: postpone operations not required for hw setup to late_init")
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reported-by: Dirk Gouders <dirk@gouders.net>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It needs to use adev->pg_flags other than adev->cg_glags in
gfx_v10_cntl_power_gating
Signed-off-by: Changfeng <Changfeng.Zhu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove the virtual_display warning in drm_crtc_vblank_off when
dev->num_crtcs is null.
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Emily.Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make use of the new struct_size() helper instead of the offsetof() idiom.
Also, use kmalloc() instead of kcalloc().
v2: squash in kzalloc fix
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make use of the new struct_size() helper instead of the offsetof() idiom.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a regular need in the kernel to provide a way to declare having
a dynamically sized set of trailing elements in a structure. Kernel code
should always use “flexible array members”[1] for these cases. The older
style of one-element or zero-length arrays should no longer be used[2].
Refactor the code according to the use of a flexible-array member in
struct phm_ppt_v1_pcie_table, instead of a one-element array, and use
the struct_size() helper to calculate the size for the allocation.
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays
Build-tested-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/5f7db0bc.7Xivn4K83f7XW0ug%25lkp@intel.com/
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a regular need in the kernel to provide a way to declare having
a dynamically sized set of trailing elements in a structure. Kernel code
should always use “flexible array members”[1] for these cases. The older
style of one-element or zero-length arrays should no longer be used[2].
Refactor the code according to the use of a flexible-array member in
struct phm_ppt_v1_voltage_lookup_table, instead of a one-element array,
and use the struct_size() helper to calculate the size for the allocation.
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays
Build-tested-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/5f7d61df.jWrFfnjxGbjSkPOp%25lkp@intel.com/
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a regular need in the kernel to provide a way to declare having
a dynamically sized set of trailing elements in a structure. Kernel code
should always use “flexible array members”[1] for these cases. The older
style of one-element or zero-length arrays should no longer be used[2].
Refactor the code according to the use of a flexible-array member in
struct phm_ppt_v1_mm_clock_voltage_dependency_table, instead of a
one-element array, and use the struct_size() helper to calculate the
size for the allocation.
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays
Build-tested-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/5f7d61e2.qiTVTyG2pVoG8bb0%25lkp@intel.com/
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a regular need in the kernel to provide a way to declare having
a dynamically sized set of trailing elements in a structure. Kernel code
should always use “flexible array members”[1] for these cases. The older
style of one-element or zero-length arrays should no longer be used[2].
Refactor the code according to the use of a flexible-array member in
struct phm_ppt_v1_clock_voltage_dependency_table, instead of a one-element
array, and use the struct_size() helper to calculate the size for the
allocation.
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays
Build-tested-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/5f7c433c.TTk9rnA+F58kyDUy%25lkp@intel.com/
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a regular need in the kernel to provide a way to declare having
a dynamically sized set of trailing elements in a structure. Kernel code
should always use “flexible array members”[1] for these cases. The older
style of one-element or zero-length arrays should no longer be used[2].
Refactor the code according to the use of a flexible-array member in
struct phm_samu_clock_voltage_dependency_table, instead of a one-element array,
and use the struct_size() helper to calculate the size for the allocation.
Also, save some heap space as the original code is multiplying
table->numEntries by sizeof(struct phm_samu_clock_voltage_dependency_table)
when it should have been multiplied it by
sizeof(struct phm_samu_clock_voltage_dependency_record) instead.
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays
Build-tested-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/5f7c5d3a.ryM4GmZr3e0JeZy+%25lkp@intel.com/
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a regular need in the kernel to provide a way to declare having
a dynamically sized set of trailing elements in a structure. Kernel code
should always use “flexible array members”[1] for these cases. The older
style of one-element or zero-length arrays should no longer be used[2].
Refactor the code according to the use of a flexible-array member in
struct phm_cac_leakage_table, instead of a one-element array,
and use the struct_size() helper to calculate the size for the allocation.
Also, save some heap space as the original code is multiplying
table->ucNumEntries by sizeof(struct phm_cac_leakage_table) when it
should have been multiplied it by sizeof(struct phm_cac_leakage_record)
instead.
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays
Build-tested-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/5f7c5d38.iT%2FQTjN+659XUDo5%25lkp@intel.com/
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a regular need in the kernel to provide a way to declare having
a dynamically sized set of trailing elements in a structure. Kernel code
should always use “flexible array members”[1] for these cases. The older
style of one-element or zero-length arrays should no longer be used[2].
Refactor the code according to the use of a flexible-array member in
struct phm_vce_clock_voltage_dependency_table, instead of a one-element array,
and use the struct_size() helper to calculate the size for the allocation.
Also, save some heap space as the original code is multiplying
table->numEntries by sizeof(struct phm_vce_clock_voltage_dependency_table)
when it should have multiplied it by sizeof(struct phm_vce_clock_voltage_dependency_record)
instead.
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays
Build-tested-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/5f7c5d35.pJToGs3H9khZK6ws%25lkp@intel.com/
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a regular need in the kernel to provide a way to declare having
a dynamically sized set of trailing elements in a structure. Kernel code
should always use “flexible array members”[1] for these cases. The older
style of one-element or zero-length arrays should no longer be used[2].
Refactor the code according to the use of a flexible-array member in
struct phm_phase_shedding_limits_table, instead of a one-element array,
and use the struct_size() helper to calculate the size for the allocation.
Also, save some heap space as the original code is multiplying
ptable->ucNumEntries by sizeof(struct phm_phase_shedding_limits_table)
when it should have multiplied it by sizeof(struct phm_phase_shedding_limits_record)
instead.
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays
Build-tested-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/5f7c5d36.6PStUZp2HRxAz7IM%25lkp@intel.com/
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a regular need in the kernel to provide a way to declare having
a dynamically sized set of trailing elements in a structure. Kernel code
should always use “flexible array members”[1] for these cases. The older
style of one-element or zero-length arrays should no longer be used[2].
Refactor the code according to the use of a flexible-array member in
struct phm_acp_clock_voltage_dependency_table, instead of a one-element
array, and use the struct_size() helper to calculate the size for the
allocation.
Also, save some heap space as the original code is multiplying
table->numEntries by sizeof(struct phm_acp_clock_voltage_dependency_table)
when it should have multiplied it by sizeof(phm_acp_clock_voltage_dependency_record)
instead.
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays
Build-tested-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/5f7c5d3c.TyfOhg%2FA6JycL6ZN%25lkp@intel.com/
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a regular need in the kernel to provide a way to declare having
a dynamically sized set of trailing elements in a structure. Kernel code
should always use “flexible array members”[1] for these cases. The older
style of one-element or zero-length arrays should no longer be used[2].
Refactor the code according to the use of a flexible-array member in
struct phm_uvd_clock_voltage_dependency_table, instead of a one-element
array, and use the struct_size() helper to calculate the size for the
allocation.
Also, save some heap space as the original code is multiplying
table->numEntries by sizeof(struct phm_uvd_clock_voltage_dependency_table)
when it should have multiplied it by sizeof(phm_uvd_clock_voltage_dependency_record)
instead.
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays
Build-tested-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/5f7c433e.pXkC6KsN6HN%2FLdhj%25lkp@intel.com/
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a regular need in the kernel to provide a way to declare having
a dynamically sized set of trailing elements in a structure. Kernel code
should always use “flexible array members”[1] for these cases. The older
style of one-element or zero-length arrays should no longer be used[2].
Refactor the code according to the use of a flexible-array member in
struct phm_clock_array, instead of a one-element array, and use the
struct_size() helper to calculate the size for the allocation.
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays
Build-tested-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/5f7c433f.ZyMD+YUIVAwiHGVe%25lkp@intel.com/
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a regular need in the kernel to provide a way to declare having
a dynamically sized set of trailing elements in a structure. Kernel code
should always use “flexible array members”[1] for these cases. The older
style of one-element or zero-length arrays should no longer be used[2].
Refactor the code according to the use of a flexible-array member in
struct phm_clock_voltage_dependency_table, instead of a one-element
array, and use the struct_size() helper to calculate the size for the
allocation.
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays
Build-tested-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/5f7c295c.8iqp1Ifc6oiVDq%2F%2F%25lkp@intel.com/
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when the hardware isn't going to use the aux plane there's no
real point in dealing with the relevant hardware restrictions.
So let's just skip all that when not necessary.
We can now also remove the offset=~0xfff behaviour for unused
color planes. Let's just zero out everyting so as to not leave
stale garbage behind to confuse people debugging the code.
v2: Explicitly set AUX_DIST to zero when there is no aux plane
Reviewed-by: Imre Deak <imre.deak@intel.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201009120028.32422-1-ville.syrjala@linux.intel.com
When the number of potential color planes grew to 4 we stopped
setting all unused color plane offsets to ~0xfff. The code
still tries to do this, but actually does nothing since the
loop limits are bogus.
skl_check_main_surface() actually depends on this ~0xfff
behaviour as it will make sure to move the main surface
offset below the aux surface offset because the hardware
AUX_DIST must be a non-negative value [1], and for simplicity
it doesn't bother checking if the AUX plane is actually
needed or not. So currently it may end up shuffling the
main surface around based on some stale leftover AUX offset.
The skl+ plane code also just blindly calculates the AUX_DIST
whether or not the AUX plane is actually needed by the hw or
not, and that too will now potentially use some stale AUX
surface offset in the calculation. Would seem nicer to
guarantee a consistent non-negative AUX_DIST always.
So bring back the original ~0xfff offset behaviour for
unused color planes. Though it doesn't seem super likely
that this inconsistency would cause any real issues.
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Fixes: 2dfbf9d287 ("drm/i915/tgl: Gen-12 display can decompress surfaces compressed by the media engine")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201008101608.8652-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
i915_{save,restore}_state() are actually all about the display.
Currently they are split into display part + SWF part. But since
the SWF part is also related to the display let's just move that
part into its own thing and flip the roles around so that the
current display part is the main function.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201005171441.26612-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
As with eDP and LVDS we should also respect the power cycle
delay on DSI panels. We are not using the power sequencer
for these, and we have no optimizations around the sleep
duration, so we just msleep() the whole thing away.
Note that the ICL+ DSI code doesn't seem to have any power
off/power cycle delay handling whatsoever. The only thing it
handles is the power on delay. As that looks pretty busted
in general I won't bother dealing with it for the time being.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201001151640.14590-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Just like with eDP let's wait for the power sequencer power
cycle delay before we reboot the machine, as otherwise we
can't guarantee the panel's minimum power cycle delay will
be respected.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201001151640.14590-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Extend the eDP panel power cycle delay wait on reboot handling
to cover all platforms. No reason to think that VLV/CHV are
in any way special since the documentation states that the
hardware power cycle delay goes back to its default value on
reset, and that may not be enough for all panels.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201001151640.14590-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Currently VLV/CHV use a reboot notifier to make sure the panel
power cycle delay isn't violated across a system reboot. Replace
that with the new encoder .shutdown() hook.
And let's also stop overriding the power cycle delay with the
max value. No idea why the current code does that. The already
programmed delay should be correct.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201001151640.14590-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Implement the pci .shutdown() hook in order to quiesce the
hardware prior to reboot. The main purpose here is to turn
all displays off. Some displays/other drivers tend to get
confused if the state after reboot isn't exactly as they
expected.
One specific example was the Dell UP2414Q in MST mode.
It would require me to pull the power cord after a reboot
or else it would just not come back to life. Sadly I don't
have that at hand anymore so not sure if it's still
misbehaving without the graceful shutdown, or if we
managed to fix something else since I last tested it.
For good measure we do a gem suspend as well, so that
we match the suspend flow more closely. Also stopping
all DMA and whatnot is probably a good idea for kexec.
I would expect that some kind of GT reset happens on
normal reboot so probably not totally necessary there.
v2: Use the pci .shutdown() hook instead of a reboot notifier (Lukas)
Do the gem suspend for kexec (Chris)
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201001151640.14590-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Amlogic SoC devices report the following errors frequently causing excessive
dmesg log spam and early log rotataion, although the errors appear to be
harmless as everything works fine:
[ 7.202702] panfrost ffe40000.gpu: error powering up gpu L2
[ 7.203760] panfrost ffe40000.gpu: error powering up gpu shader
ARM staff have advised increasing the timeout values to eliminate the errors
in most normal scenarios, and testing with several different G31/G52 devices
shows 20000 to be a reliable value.
Fixes: f3ba91228e ("drm/panfrost: Add initial panfrost driver")
Suggested-by: Steven Price <steven.price@arm.com>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201008141738.13560-1-christianshewitt@gmail.com
DRM_GEM_CMA_DRIVER_OPS sets the functions in struct drm_driver
to their defaults. No functional changes are made.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://patchwork.freedesktop.org/patch/msgid/20200603083132.4610-5-tzimmermann@suse.de
These settings are used by an ASPEED BMC to determine when the host is
trying to drive the display over PCIe (vga_pw) and to switch the
output between PCIe and the internal graphics device (dac_mux).
The valid values for the dac mux are:
00: VGA mode (default, aka PCIe)
01: Graphics CRT (aka BMC internal graphics, this driver)
10: Pass through mode from video input port A
11: Pass through mode from video input port B
Values for the read-only vga password register are:
1: Host driving the display
0: Host not driving the display
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://patchwork.freedesktop.org/patch/msgid/20200916083413.777307-1-joel@jms.id.au
[Why & How]
change abm config init interface to support multiple ABMs.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If more than two jobs end up timeout-ing concurrently, only one of them
(the one attached to the scheduler acquiring the lock) is fully handled.
The other one remains in a dangling state where it's no longer part of
the scheduling queue, but still blocks something in scheduler, leading
to repetitive timeouts when new jobs are queued.
Let's make sure all bad jobs are properly handled by the thread
acquiring the lock.
v3:
- Add Steven's R-b
- Don't take the sched_lock when stopping the schedulers
v2:
- Fix the subject prefix
- Stop the scheduler before returning from panfrost_job_timedout()
- Call cancel_delayed_work_sync() after drm_sched_stop() to make sure
no timeout handlers are in flight when we reset the GPU (Steven Price)
- Make sure we release the reset lock before restarting the
schedulers (Steven Price)
Fixes: f3ba91228e ("drm/panfrost: Add initial panfrost driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201002122506.1374183-1-boris.brezillon@collabora.com
Hopefully we'll have the drm crash recorder RSN, but meanwhile
compositors would like to know a bit better why they get an EBUSY.
v2: Move misplaced hunk to the right patch (Pekka)
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Daniel Stone <daniel@fooishbar.org>
Cc: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Cc: Simon Ser <contact@emersion.fr>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200925084651.3250104-2-daniel.vetter@ffwll.ch
When doing an atomic modeset with ALLOW_MODESET drivers are allowed to
pull in arbitrary other resources, including CRTCs (e.g. when
reconfiguring global resources).
But in nonblocking mode userspace has then no idea this happened,
which can lead to spurious EBUSY calls, both:
- when that other CRTC is currently busy doing a page_flip the
ALLOW_MODESET commit can fail with an EBUSY
- on the other CRTC a normal atomic flip can fail with EBUSY because
of the additional commit inserted by the kernel without userspace's
knowledge
For blocking commits this isn't a problem, because everyone else will
just block until all the CRTC are reconfigured. Only thing userspace
can notice is the dropped frames without any reason for why frames got
dropped.
Consensus is that we need new uapi to handle this properly, but no one
has any idea what exactly the new uapi should look like. Since this
has been shipping for years already compositors need to deal no matter
what, so as a first step just try to enforce this across drivers
better with some checks.
v2: Add comments and a WARN_ON to enforce this only when allowed - we
don't want to silently convert page flips into blocking plane updates
just because the driver is buggy.
v3: Fix inverted WARN_ON (Pekka).
v4: Drop the uapi changes, only add a WARN_ON for now to enforce some
rules for drivers.
v5: Make the WARNING more informative (Daniel)
v6: Add unconditional debug output for compositor hackers to figure
out what's going on when they get an EBUSY (Daniel)
v7: Fix up old/new_crtc_state confusion for real (Pekka/Ville)
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
References: https://lists.freedesktop.org/archives/dri-devel/2018-July/182281.html
Bugzilla: https://gitlab.freedesktop.org/wayland/weston/issues/24#note_9568
Cc: Daniel Stone <daniel@fooishbar.org>
Cc: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Cc: Simon Ser <contact@emersion.fr>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200925084651.3250104-1-daniel.vetter@ffwll.ch
We didn't take the kernel_fb_helper_lock mutex, which protects that
code. While at it, simplify the code
- inline the function (originally shared with kgdb I think)
- drop the error tracking and all the complications
- drop the pointless early out, it served nothing
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201007133036.1541639-1-daniel.vetter@ffwll.ch
We want to use the dev_* functions here rather than the pr_* variants.
Switch to using dev_warn() which mirrors what we do on other asics.
Fixes the following build errors on ARC:
../drivers/gpu/drm/amd/amdgpu/../powerplay/navi10_ppt.c: In function 'navi10_fill_i2c_req':
../arch/arc/include/asm/bug.h:24:2: error: implicit declaration of function 'pr_warn'; did you mean 'drm_warn'? [-Werror=implicit-function-declaration]
../drivers/gpu/drm/amd/amdgpu/../powerplay/sienna_cichlid_ppt.c: In function 'sienna_cichlid_fill_i2c_req':
../arch/arc/include/asm/bug.h:24:2: error: implicit declaration of function 'pr_warn'; did you mean 'drm_warn'? [-Werror=implicit-function-declaration]
Reported-by: kernel test robot <lkp@intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Evan Quan <evan.quan@amd.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: linux-snps-arc@lists.infradead.org
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit c1cf79ca5c ("drm/amdgpu: use IP discovery table for renoir")
introduced a NULL pointer dereference when booting with
amdgpu.discovery=0, because it removed the call of vega10_reg_base_init()
for that case.
Fix this by calling that funcion if amdgpu_discovery == 0 in addition to
the case that amdgpu_discovery_reg_base_init() failed.
Fixes: c1cf79ca5c ("drm/amdgpu: use IP discovery table for renoir")
Signed-off-by: Dirk Gouders <dirk@gouders.net>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The only bit we use in PHY_MISC is DE_IO_COMP_PWR_DOWN, and the bspec
details for that bit tell us that it need only be set for PHY-A and
PHY-B. It also turns out that there isn't even an instance of the
PHY_MISC register for PHY-D on this platform. Let's extend the EHL/RKL
logic that conditionally skips PHY_MISC usage to DG1 as well.
Bspec: 50107
Cc: Aditya Swarup <aditya.swarup@intel.com>
Cc: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201007002210.3678024-6-lucas.demarchi@intel.com
Add tables to map the GMBUS pin pairs to GPIO registers and port to DDC.
From spec we have registers GPIO_CTL[1-4], so we should not do the 4->9
mapping as in ICL/TGL.
The values for VBT seem wrong in BSpec. For the current boards we
actually have a 1:1 mapping.
BSpec: 49311, 49945, 20124
Cc: Aditya Swarup <aditya.swarup@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201007002210.3678024-5-lucas.demarchi@intel.com
On DGFX the register range has been extended to go up to 8MB. However we
only actually use up to address 280000h, so let's increase it to 4MB.
v2 (Lucas): add bspec reference and reword commit message to explain
the 4 vs 8 MB used (requested by Matt Roper)
Bspec: 53616
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201007002210.3678024-4-lucas.demarchi@intel.com
DG1 has a new MOCS table. We still use the old definition of the table,
but as for any dgfx card it doesn't contain the control_value values
(these values don't matter as we won't program them).
Bspec: 45101
v2: Reword the comment to state that the last few entries are reserved
instead of "the last two". DG1 reserves four instead of two from
previous platforms (from Matt Roper)
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201007002210.3678024-3-lucas.demarchi@intel.com
DG1 always uses a 38.4 MHz rawclk rather than the 19.2/24 MHz
frequencies on CNP+. Note that register bits associated with this
frequency confusingly use 37 for the divider field rather than 38 as you
might expect.
For simplicity, let's just assume that this 38.4 MHz frequency will hold
true for other future platforms with "fake" PCH south displays and that
the CNP-style behavior will remain for other platforms with a real PCH.
Bspec: 49950
Bspec: 49309
Cc: Aditya Swarup <aditya.swarup@intel.com>
Cc: Clinton Taylor <Clinton.A.Taylor@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201007002210.3678024-2-lucas.demarchi@intel.com
Recent update in documentation defeatured eDP HBR3 for EHL and JSL.
v2:
- Remove dead code in ehl_get_combo_buf_trans()
v3:
- Rebase
BSpec: 32247
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201005175447.93430-1-jose.souza@intel.com
This reverts commit 37054fc814 ("gpu/drm: ingenic: Add option to mmap
GEM buffers cached")
At the very moment this commit was created, the DMA API it relied on was
modified in the DMA tree, which caused the driver to break in
linux-next.
Revert it for now, and it will be resubmitted later to work with the new
DMA API.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201004141758.1013317-1-paul@crapouillou.net
Enable Green_Sardine VCN support and VCN firmware loading
v2: use apu flags
Signed-off-by: Thong Thai <thong.thai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Initialize the SDMA IP for green_sardine.
v2: use apu flags
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable the gfx base HW function of green_sardine.
v2: use apu flags
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds common ip support for green_sardine.
v2: use apu flags, squash in CG/PG enablement
v3: rebase
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds green_sardine support for gpu_info firmware and ip block setting.
v2: use apu flag
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The default auto setting for kcq should not generate
a warning.
Fixes: a300de40f6 ("drm/amdgpu: introduce a new parameter to configure how many KCQ we want(v5)")
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We want to use the dev_* functions here rather than the pr_* variants.
Switch to using dev_warn() which mirrors what we do on other asics.
Fixes the following build errors on ARC:
../drivers/gpu/drm/amd/amdgpu/../powerplay/navi10_ppt.c: In function 'navi10_fill_i2c_req':
../arch/arc/include/asm/bug.h:24:2: error: implicit declaration of function 'pr_warn'; did you mean 'drm_warn'? [-Werror=implicit-function-declaration]
../drivers/gpu/drm/amd/amdgpu/../powerplay/sienna_cichlid_ppt.c: In function 'sienna_cichlid_fill_i2c_req':
../arch/arc/include/asm/bug.h:24:2: error: implicit declaration of function 'pr_warn'; did you mean 'drm_warn'? [-Werror=implicit-function-declaration]
Reported-by: kernel test robot <lkp@intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Evan Quan <evan.quan@amd.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: linux-snps-arc@lists.infradead.org
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add xgmi perfmons for Arcturus.
v4: Align with patch 2 with struct improvements
v3: Align with patch 2 streamlining perf types versus event config types.
v2: Resend for re-review with alignment for v3 in patch 2.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Tested-by: Chris Freehill <chris.freehill@amd.com>
Reviewed-by: Harish Kasiviswanathan <harish.kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Non-outbound data metrics are non useful so mark them as legacy.
Bucket new perf counters into device and not device ip.
Bind events to chip instead of IP.
Report available event counters and not number of hw counter banks.
Move DF public macros to private since not needed outside of IP version.
v5: cleanup by moving per chip configs into structs
v4: After more discussion, replace *_LEGACY references with IP references
to indicate concept of pmu-typed versus event-config-typed event
registration.
v3: attr groups const array is global but attr groups are allocated per
device which doesn't work and causes problems on memory allocation and
de-allocation for pmu unregister. Switch to building const attr groups
per pmu instead to simplify solution.
v2: add comments on sysfs structure and formatting.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Harish Kasiviswanathan <harish.kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mapping hw counters per event config will cause ABA problems so map per
event instead.
v2: Discontinue starting perf counters if add fails. Make it clear what's
happening with pmc_start.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Harish Kasiviswanathan <harish.kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is not something drivers should use.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patchwork.freedesktop.org/patch/393430/
That was missed during the cleanup.
v2: fix comment in vmwgfx as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patchwork.freedesktop.org/patch/394092/
It is the sole user of this.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/393498/
We can always access the global state.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/393499/
Make it more clear what the resource manager function
does and nuke the wrapper function.
v2: nuke the wrapper
v3: fix typo in radeon, rebased
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v2)
Link: https://patchwork.freedesktop.org/patch/393914/
Since we track the idle_pulse for flushing the barriers and avoid
re-emitting the pulse upon idling if no futher action is required, this
also impacts the heartbeat. Before emitting a fresh heartbeat, we look
at the engine idle status and assume that if the pulse was the last
request emitted along the heartbeat, the engine is idling and a
heartbeat pulse not required. This assumption fails, but we can reuse
the idle pulse as the heartbeat if we are yet to emit one, and so track
the status of that pulse for our engine health check.
This impacts tgl/rcs0 as we rely on the heartbeat for our healthcheck for
the normal preemption detection mechanism is disabled by default.
Testcase: igt/gem_exec_schedule/preempt-hang/rcs0 #tgl
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201006094653.7558-1-chris@chris-wilson.co.uk
Remove unused parameters, shorten the function name.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patchwork.freedesktop.org/patch/393431/
Previously the code relied on device->pri to be NULL and to fail probing
later. We really should just return an error inside nvkm_device_ctor for
unsupported GPUs.
Fixes: 24d5ff40a7 ("drm/nouveau/device: rework mmio mapping code to get rid of second map")
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Cc: dann frazier <dann.frazier@canonical.com>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Dave Airlie <airlied@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jeremy Cline <jcline@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201006220528.13925-1-kherbst@redhat.com
As the previous patch fixed the places where we walk the whole scatterlist
for DMA addresses, this patch fixes the random lookup functionality.
To achieve this we have to add a second lookup iterator and add a
i915_gem_object_get_sg_dma helper, to be used analoguous to existing
i915_gem_object_get_sg_dma. Therefore two lookup caches are maintained per
object and they are flushed at the same point for simplicity. (Strictly
speaking the DMA cache should be flushed from i915_gem_gtt_finish_pages,
but today this conincides with unsetting of the pages in general.)
Partial VMA view is then fixed to use the new DMA lookup and properly
query sg length.
v2:
* Checkpatch.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Tom Murphy <murphyt7@tcd.ie>
Cc: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201006092508.1064287-2-tvrtko.ursulin@linux.intel.com
When walking DMA mapped scatterlists sg_dma_len has to be used since it
can be different (coalesced) from the backing store entry.
This also means we have to end the walk when encountering a zero length
DMA entry and cannot rely on the normal sg list end marker.
Both issues were there in theory for some time but were hidden by the fact
Intel IOMMU driver was never coalescing entries. As there are ongoing
efforts to change this we need to start handling it.
v2:
* Use unsigned int for local storing sg_dma_len. (Logan)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
References: 85d1225ec0 ("drm/i915: Introduce & use new lightweight SGL iterators")
References: b31144c0da ("drm/i915: Micro-optimise gen6_ppgtt_insert_entries()")
Reported-by: Tom Murphy <murphyt7@tcd.ie>
Suggested-by: Tom Murphy <murphyt7@tcd.ie> # __sgt_iter
Suggested-by: Logan Gunthorpe <logang@deltatee.com> # __sgt_iter
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201006092508.1064287-1-tvrtko.ursulin@linux.intel.com
Currently we do a final scrub of the HW state upon release. However,
when rebinding the device, this is too late as the device may either
have been partially rebound or the device is no longer accessible. If
the device has been removed before release, the reset goes astray
leaving the device in an inconsistent state, unlikely to work without a
full PCI reset. Furthermore, if the device is partially rebound before
the HW scrubbing, there may be leftover HW state that should have been
scrubbed. Either way, we need to push the scrubbing earlier before the
removal, so into unregister. The danger is that on older machines,
resetting the GPU also impact the display engine and so the reset should
be after modesetting is disabled (and before reuse we need to recover
modesetting).
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2508
Testcase: igt/core_hotunplug
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200929112639.24223-1-chris@chris-wilson.co.uk
Apply Display WA #22010492432 for combo PHY PLLs too. This should fix a
problem where the PLL output frequency is slightly off with the current
PLL fractional divider value.
I haven't seen an actual case where this causes a problem, but let's
follow the spec. It's also needed on some EHL platforms, but for that we
also need a way to distinguish the affected EHL SKUs, so I leave that
for a follow-up.
v2:
- Apply the WA at one place when calculating the PLL dividers from the
frequency and the frequency from the dividers for all the combo PLL
use cases (DP, HDMI, TBT). (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201003001846.1271151-6-imre.deak@intel.com
Atm, if a full modeset is performed during the initial modeset the link
training will happen with uninitialized max DP rate and lane count. Make
sure the corresponding encoder state is initialized by adding an encoder
hook called during driver init and system resume.
A better alternative would be to store all states in the CRTC state and
make this state available for the link re-training code. Also instead of
the DPCD read in the hook there should be really a proper sink HW
readout in place. Both of these require a bigger rework, so for now opting
for this minimal fix to make at least full initial modesets work.
The patch is based on
https://patchwork.freedesktop.org/patch/101473/?series=10354&rev=3
v2: (Ville)
- s/sanitize_state/sync_state/
- No point in calling the hook when CRTC is disabled, remove the call.
- No point in calling the hook for MST, remove it.
v3: Check only DPCD_REV to avoid clobbering intel_dp->dpcd. (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201005230154.1477653-1-imre.deak@intel.com
Some BIOSes set an unsupported/imprecise DP link rate (for instance on
TGL A stepping). Make sure that we do an encoder recompute and a modeset
in this case.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201003001846.1271151-4-imre.deak@intel.com
Move the checks to decide whether a fastset is possible during the
initial commit to an encoder hook. This check is really encoder specific
and the next patch will also require this adding a DP encoder specific
check.
v2: Fix negated condition in gen11_dsi_initial_fastset_check().
v3: Make sure to call the hook for all encoders on the crtc. (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201005215311.1475666-1-imre.deak@intel.com
The BIOS of at least one ASUS-Z170M system with an SKL I have programs
the 101b WRPLL PDIV divider value, which is the encoding for PDIV=7 with
bit#0 incorrectly set.
This happens with the
"3840x2160": 30 262750 3840 3888 3920 4000 2160 2163 2168 2191 0x48 0x9
HDMI mode (scaled from a 1024x768 src fb) set by BIOS and the
ref_clock=24000, dco_integer=383, dco_fraction=5802, pdiv=7, qdiv=1, kdiv=1
WRPLL parameters (assuming PDIV=7 was the intended setting). This
corresponds to 262749 PLL frequency/port clock.
Later the driver sets the same mode for which it calculates the same
dco_int/dco_frac/div WRPLL parameters (with the correct PDIV=7 encoding).
Based on the above, let's assume that PDIV=7 was intended and the HW
just ignores bit#0 in the PDIV register field for this setting, treating
100b and 101b encodings the same way.
While at it add the MISSING_CASE() for the p0,p2 divider decodings.
v2: (Ville)
- Add a define for the incorrect divider value.
- Emit only a debug message when detecting the incorrect divider value.
- Use fallthrough from the incorrect divider value case.
- Add the MISSING_CASE()s.
v3: Return 0 freq for incorrect divider values. (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201006013555.1488262-1-imre.deak@intel.com
Though less likely in practice, igt uses MI_NOOP frequently to pad out
its batch buffers. The lookup and valiation of so many MI_NOOP command
descriptions is noticeable, though the side-effect of poisoning the
last-validated-command cache is more likely to impact upon real CS.
Testcase: igt/gen9_exec_parse/bb-large
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201001102632.18789-1-chris@chris-wilson.co.uk
Split out all the bits that are purely for dma_map_ops implementations
and related code into a new <linux/dma-map-ops.h> header so that they
don't get pulled into all the drivers. That also means the architecture
specific <asm/dma-mapping.h> is not pulled in by <linux/dma-mapping.h>
any more, which leads to a missing includes that were pulled in by the
x86 or arm versions in a few not overly portable drivers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
The idea is to flip the core over to calling the driver always,
so add support for moves here.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200924051845.397177-6-airlied@gmail.com
Extend __sg_alloc_table_from_pages to support dynamic allocation of
SG table from pages. It should be used by drivers that can't supply
all the pages at one time.
This function returns the last populated SGE in the table. Users should
pass it as an argument to the function from the second call and forward.
As before, nents will be equal to the number of populated SGEs (chunks).
With this new extension, drivers can benefit the optimization of merging
contiguous pages without a need to allocate all pages in advance and
hold them in a large buffer.
E.g. with the Infiniband driver that allocates a single page for hold the
pages. For 1TB memory registration, the temporary buffer would consume only
4KB, instead of 2GB.
Link: https://lore.kernel.org/r/20201004154340.1080481-2-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
DG1 does some additional pcode/uncore handshaking at
boot time; this handshaking must complete before various other pcode
commands are effective and before general work is submitted to the GPU.
We need to poll a new pcode mailbox during startup until it reports that
this handshaking is complete.
The bspec doesn't give guidance on how long we may need to wait for this
handshaking to complete. For now, let's just set a really long timeout;
if we still don't get a completion status by the end of that timeout,
we'll just continue on and hope for the best.
v2 (Lucas): Rename macros to make clear the relation between command and
result (requested by José)
Bspec: 52065
Cc: Clinton Taylor <Clinton.A.Taylor@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201001063917.3133475-2-lucas.demarchi@intel.com
When using fake lmem for tests, we are overriding the setting in
device info for dgfx devices. Current users of IS_DGFX() except one are
correct. However, as we add support for DG1, we are going to use it in
additional places to trigger dgfx-only code path.
In future if we need we can use HAS_LMEM() instead of IS_DGFX() in the
places that make sense to also contemplate fake lmem use.
v2: update gen8_gmch_probe() to use HAS_LMEM(): we need to steal the
mappable aperture later(which is fine since it doesn't exist on "DGFX"),
and use it as a substitute for LMEMBAR. The !mappable aperture property
is also useful since it exercises some other parts of the code too.
(Matthew Auld)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201001063917.3133475-1-lucas.demarchi@intel.com
[Why]
DAL resume from BACO time is longer if we always flush inst_fb
[How]
Check if backdoor loading to flush inst_fb
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When forcing 3D mode in DAL, we set the right address to be the same as the
left address. We need to do the same for the meta addresses.
[How]
Program right meta to be same as left meta.
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Currently construction of clock limits gets skipped for diags.
This logic would be useful to get tested in diags.
[HOW]
Copy existing states to clk_table such that update_bw_bounding_box
logic gets used to fill the table.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
On narrow range monitors without LFC, a margin prevents good utilization
of the available range.
[How]
Decrease the margin for exiting fixed mode and fix the frame counter to
reset if a non-consecutive render is found.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This should be programmed with timing rather than with odm.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
HDCP 1.4 failed on SL8800 SW w/a test driver use.
[how]
Slow down the HW i2c speed when used by HW i2c.
This request: each acquired_i2c_engine setup the i2c speed needed
and sets the I2c engine for HDCP use at release_engine.
This covers SW using HW i2c engine and HDCP using HW i2c engine.
for dmcu using HW i2c engine, needs add similar logic in dmcu fw.
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
enable ODM on eDP panel with ABM will result in color difference
on the panel due to only one ABM module to set one pipe.
[How]
Block ABM in case of ODM enabled on eDP.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When we transfer the WM range table to SMU, they can perform a watermark
switch right away. This can be a problem if we're in not in accelerated mode
during hw_init as SMU may initiate a dummy p-state change before the rest
of the watermarks are programmed. Watermark set A is defined to be
sufficient for all cases, so we can copy the values from set A to all other
sets, avoiding any issues from SMU doing WM switches.
[How]
- new hubbub func init_watermarks
- copy register values from set A to all other sets
- call init_watermarks before calling notify_wm_ranges
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During driver unload, it is expected that p-state switching is supported.
If it's not supported, PMFW will hang due to a forced p-state switch. Even
if the current timing does not support p-state normally, we still want to
force allow because the worst that can happen is underflow. This will
match Navi10 behaviour.
[How]
- new hubbub func to control the force pstate register
- force allow when releasing display ownership
- registers are inaccessible after due to m_cgs.hwNotAvailable
- explicitly disable force signal during hw_init
- if driver is disabled and re-enabled, register not cleared otherwise
Also, remove DCN3 part of dcn10_init_hw, we will not be going back to it.
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
This change was implemented because the comment style was not uniform
across the file. In some lines comments were initiated with // and in
others they were in between /* ... */.
Additionally, the style for multi-line comments was also not uniform and
some comment lines were missing the space between the opening /* and the
first word of the comment.
[HOW]
All comments are now in between /*.../*, multi line comments also use
/*...*/ and for every comment there is now a space between the opening
/* and the first word of the comment.
Signed-off-by: Felipe <Felipe.Clark@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When running games or benchmarking with v-sync disabled, disabling
a plane (which is v-sync) can cause underflow. This is caused by
flips pending before pipe locking being applied after locks are
released and pipes could have been re-arranged or disconnected. This
could potentially apply a flip on incorrect pipe. Also, previous logic
of always locking pipes was unnecessary.
[How]
Only lock the pipes when there is a pipe being disabled to increase
efficiency. Before the pipes are locked, check that any pending flips
are cleared to ensure the flips are applied to the correct pipe.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We will hang if we report switch in VACTIVE but not in VBLANK and DPG_EN = 1
[How]
Block switch in ACTIVE if not supported in BLANK
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add Van Gogh PCI id support.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update dc for vangogh support.
v2: fix compilation without DCN 301 set.
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to enable the gfx cg and pg for vangogh.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds power gating handler for gfx10.
v2: simplify function
Signed-off-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Print the name of the client rather than the number. This
makes it easier to debug what block is causing the fault.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GFXOFF will be enabled once it's verified on real asic.
v2: move check into gfx10 module.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to enable psp support for vangogh
Signed-off-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
APU needs load toc firmware for gfx10 series on psp front door loading.
v2: rebase against latest code
v3: clarify error message
Signed-off-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add ip block for vangogh.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add vangogh ppt funcions into swSMU block.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to partially enable swSMU for vangogh for the moment.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add smu initialize functions for vangogh.
v2: squash in updates
v3: drop duplicate table entries
v4: rebase fixes
Signed-off-by: Xiaojian Du <xiaojian.du@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add vangogh asic name in smu v11.
v2: drop smu firmware name (N/A for VG)
Signed-off-by: Xiaojian Du <xiaojian.du@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add smu v11.5 smc header for vangogh.
Signed-off-by: Xiaojian Du <xiaojian.du@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add smu v11.5 firmware header for vangogh
v2: squash in updates
Signed-off-by: Xiaojian Du <xiaojian.du@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add smu v11.5 driver interface header for vangogh.
Signed-off-by: Xiaojian Du <xiaojian.du@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add new smu messages and feature masks for vangogh.
v2: squash in updates and typo fixes
Signed-off-by: Xiaojian Du <xiaojian.du@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VanGogh uses nbio v7.2, and a couple of offsets are changed since nbio
v2.3 for navi series, so add new nbio v7.2 block.
v2: squash in fix for sdma and vcn instances
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add pcie port indirect read/write callback for nv
series. They will be used for new asic.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are too many register offset mismatch between mmhub v2.0 and v2.3.
E.X:
mmMM_ATC_L2_MISC_CG: 0x064a(v2.0) 0x06cd(v2.3)
mmMMVM_L2_PROTECTION_FAULT_CNTL: 0x0688(v2.0) 0x0708(v2.3)
mmMMVM_CONTEXT0_PAGE_TABLE_BASE_ADDR_LO32: 0x072b(v2.0) 0x0940(v2.3)
mmMMVM_CONTEXT0_PAGE_TABLE_BASE_ADDR_HI32: 0x072c(v2.0) 0x0941(v2.3)
mmMMVM_INVALIDATE_ENG0_REQ: 0x06e3(v2.0) 0x0a01(v2.3)
mmMMVM_INVALIDATE_ENG0_ACK: 0x06f5(v2.0) 0x0a02(v2.3)
mmMMVM_CONTEXT0_CNTL: 0x06c0(v2.0) 0x0740(v2.3)
mmMMVM_L2_PROTECTION_FAULT_STATUS: 0x068c(v2.0) 0x070c(v2.3)
mmMMVM_L2_PROTECTION_FAULT_CNTL: 0x0688(v2.0) 0x0708(v2.3)
mmMM_ATC_L2_MISC_CG: 0x064a(v2.0) 0x06cd(v2.3)
mmDAGB0_CNTL_MISC2: 0x0071(v2.0) 0x0096(v2.3)
...
Continuing using the same file mmhub v2.0 is not good choice, it will
introduce a lot of checking with ASIC types. And also easy to introduce the
issues that offset not align, this kind of issues are really hard to find. Van
Gogh's mmhub vm invalidation is actually caused by the offset mismatch as well.
So it would like to create a new file rather than stick to re-use orignal mmhub
v2.0 here.
v2: add missed translate_further programming.
v3: sync with latest code
v4: add missing callbacks
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add GFX10 based APU Van Gogh KFD support. We will treat Van
Gogh as "dgpu" (bypass IOMMU v2).
Signed-off-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Yong Zhao <Yong.Zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable ip blocks for van gogh.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds the sdma v5.2 support for van gogh.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add gfx golden settings for vangogh post si.
v2: squash in updates
v3: fix SPI register offset
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch sets fw load type as direct for van gogh for the moment.
Will switch to psp when psp is ready.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add gfx memory controller support for van gogh.
v2: don't use dynamic invalidate eng allocation for van gogh.
v3: squash in other fixes
v4: rebase
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to get the correct vram type from atombios for van gogh.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Required for vangogh.
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The interrupts are not stable while uses guest physical address (GPA)
for interrupt packet write space even on direct loading case.
v2: make condition more readable
Signed-off-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds the support for van gogh ih block.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Van gogh only has one sdma.
v2: use num_instances rather than APU flag
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds common ip support for van gogh.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds vangogh_reg_base_init function to init the register base for
van gogh.
v2: make vangogh_reg_base_init void, align equality sign
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds van gogh support for gpu_info firmware and ip block setting.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds van gogh to amd_asic_type enum and amdgpu_asic_name[].
v2: add missing comma
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add vangogh asic header files.
v2: squash in updates
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Currently mode validation is bypassed if remote sink exists. That
leads to mode set issue when a BW bottle neck exists in the link path,
e.g., a DP-to-HDMI converter that only supports HDMI 1.4.
Any invalid mode passed to Linux user space will cause the modeset
failure due to limitation of Linux user space implementation.
[How]
Mode validation is skipped only if in edid override. For real remote
sink, clock limit check should be done for HDMI remote sink.
Have HDMI related remote sink going through mode validation to
elimiate modes which pixel clock exceeds BW limitation.
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Formula uses kHz in their formula while our driver operates with Hz.
[How]
Divide audio rate by 1000 on the initial variable that is entered into formula.
Signed-off-by: Chris Park <Chris.Park@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Acked-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Sometimes CRTCs can be disabled due to display unplugging or temporarily
transition in the userspace; in these circumstances, DCE tries to set
the minimum clock threshold. When we have this situation, the function
bw_calcs is invoked with number_of_displays set to zero, making DCE set
dispclk_khz and sclk_khz to zero. For these reasons, we have seen some
ATOM bios errors that look like:
[drm:atom_op_jump [amdgpu]] *ERROR* atombios stuck in loop for more than
5secs aborting
[drm:amdgpu_atom_execute_table_locked [amdgpu]] *ERROR* atombios stuck
executing EA8A (len 761, WS 0, PS 0) @ 0xEABA
[How]
This error happens due to an attempt to optimize the bandwidth using the
sclk, and the dispclk clock set to zero. Technically we handle this in
the function dce112_set_clock, but we are not considering the case that
this value is set to zero. This commit fixes this issue by ensuring that
we never set a minimum value below the minimum clock threshold.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
align frag_end to the next pd when there are no
page table entries on the current pde.
This fixes invalidation of larger address space areas
where some page tables are allocated and other aren't.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit c1cf79ca5c ("drm/amdgpu: use IP discovery table for renoir")
introduced a NULL pointer dereference when booting with
amdgpu.discovery=0, because it removed the call of vega10_reg_base_init()
for that case.
Fix this by calling that funcion if amdgpu_discovery == 0 in addition to
the case that amdgpu_discovery_reg_base_init() failed.
Fixes: c1cf79ca5c ("drm/amdgpu: use IP discovery table for renoir")
Signed-off-by: Dirk Gouders <dirk@gouders.net>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch restores DRM connector registration in the TC358764 bridge
driver and restores usage of the old drm_panel_* API, thus allows dynamic
panel registration. This fixes panel operation on Exynos5250-based
Arndale board.
This is equivalent to the revert of the following commits:
1644127f83 "drm/bridge: tc358764: add drm_panel_bridge support"
385ca38da2 "drm/bridge: tc358764: drop drm_connector_(un)register"
and removal of the calls to drm_panel_attach()/drm_panel_detach(), which
were no-ops and has been removed in meanwhile.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200930114042.5806-1-m.szyprowski@samsung.com
The only usage of dw_hdmi_i2s_ops is to assign its address to the ops
field in the hdmi_codec_pdata struct, which is a const pointer. Make it
const to allow the compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201004200653.14702-1-rikard.falkeborn@gmail.com
clang static analysis reports this problem:
cdv_intel_dp.c:2101:2: warning: Attempt to free released memory
kfree(gma_connector);
^~~~~~~~~~~~~~~~~~~~
In cdv_intel_dp_init() when the call to cdv_intel_edp_panel_vdd_off()
fails, the handler calls cdv_intel_dp_destroy(connector) which does
the first free of gma_connector. So adjust the goto label and skip
the second free.
Fixes: d112a8163f ("gma500/cdv: Add eDP support")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201003193928.18869-1-trix@redhat.com
If we don't initialize the entity to idle and the entity is never
scheduled before being destroyed we end up with an infinite wait in the
destroy path.
v2:
- Add Steven's R-b
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/393486/
drm_gem_fb_prepare_fb() extracts fence and attaches to plane state.
The fence info is needed if implicit fencing is used. Add this as
prepare_fb function pointer to plane helper funcs.
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826134409.473554-1-tomi.valkeinen@ti.com
This reverts commit 37054fc814 ("gpu/drm: ingenic: Add option to mmap
GEM buffers cached")
At the very moment this commit was created, the DMA API it relied on was
modified in the DMA tree, which caused the driver to break in
linux-next.
Revert it for now, and it will be resubmitted later to work with the new
DMA API.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201004141758.1013317-1-paul@crapouillou.net
All slots in sysrq_key_table[] are either used, reserved or at least
commented with their intended use. This patch adds capital letter versions
available, which means adding 26 more entries.
For already existing SysRq operations the user presses Alt-SysRq-<key>, and
for the newly added ones Alt-Shift-SysRq-<key>.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20200818112825.6445-2-andrzej.p@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Crank up the warning a notch and point at the right set of locking
functions for atomic drivers.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201002075620.4157591-1-daniel.vetter@ffwll.ch
Make lspcon_init() static since it's no longer needed outside
the compilation unit. This was correct in Kai-Heng's lspcon
patch, but I fumbled this when applying it.
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reported-by: kernel test robot <lkp@intel.com>
Fixes: f542d671ff ("drm/i915: Init lspcon after HPD in intel_dp_detect()")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201002090446.21104-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
When I refactored this code with the new init paths, I failed to
set the funcs back up properly, this caused a failure to bringup
gdm properly.
Fixes: 252f8d7b91 ("drm/vmwgfx/ttm: convert vram mm init to new code paths")
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201001042012.13114-1-airlied@gmail.com
On HP 800 G4 DM, if HDMI cable isn't plugged before boot, the HDMI port
becomes useless and never responds to cable hotplugging:
[ 3.031904] [drm:lspcon_init [i915]] *ERROR* Failed to probe lspcon
[ 3.031945] [drm:intel_ddi_init [i915]] *ERROR* LSPCON init failed on port D
Seems like the lspcon chip on the system only gets powered after the
cable is plugged.
Consilidate lspcon_init() into lspcon_resume() to dynamically init
lspcon chip, and make HDMI port work.
v6:
- Rebase on latest for-linux-next.
v5:
- Consolidate lspcon_resume() with lspcon_init().
- Move more logic into lspcon code.
v4:
- Trust VBT in intel_infoframe_init().
- Init lspcon in intel_dp_detect().
v3:
- Make sure it's handled under long HPD case.
v2:
- Move lspcon_init() inside of intel_dp_hpd_pulse().
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/203
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200610075542.12882-1-kai.heng.feng@canonical.com
We need to schedule the smu AC/DC interrupt ack to avoid
potentially sleeping if the smu message mutex is contended.
Fixes: e1188aacad ("drm/amdgpu/smu11: add support for SMU AC/DC interrupts")
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So we can schedule work from interrupts. This might include
long tasks or things that could sleep.
Fixes: e1188aacad ("drm/amdgpu/smu11: add support for SMU AC/DC interrupts")
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add mp0 11_0_11 for navy_flounder to the mem training
supported list, otherwise the modeprobe would fail
on navy_flounder with latest vbios.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
support both direct and indirect accessor in unified
helper functions.
v2: Retire indirect mmio access via mm_index/data
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Switch WREG32/RREG32_PCIE to use indirect reg access
helper for soc15 and onwards
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add helper function in order to remove RREG32/WREG32
in current pcie_rreg/wreg function for soc15 and
onwards adapters.
PCIE_INDEX/DATA pairs are used to access regsiters
outside of mmio bar in the helper functions.
The new helper functions help remove the recursion
of amdgpu_mm_rreg/wreg from pcie_rreg/wreg and
provide the oppotunity to centralize direct and
indirect access in a single function.
v2: Fixed typo and refine the comments
v3: Remove unnecessary volatile local variable
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Now that we've plumbed the crtc state all the way down we can
eliminate the DP_TP_{CTL,STATUS} register offsets from intel_dp,
and instead we derive them directly from the crtc state.
And thus we can get rid of the nasty hack in intel_ddi_get_config()
which mutates intel_dp during the readout.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200929233449.32323-12-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Get rid of mode crtc->config usage, and some ad-hoc intel_dp state
usage by plumbing the crtc state all the way down to the link training
code.
Unfortunately we do have to keep some cached state in intel_dp so
that we can do the "does the link need retraining?" checks from
the short hpd handler.
v2: Add intel_crtc_state forward declaration
v3: Don't kill the PHY test code totally since it's
now in the hotplug work where we can get at the states
v4: Don't resurrect the debug scrambling disable bit (Imre)
Use intel_dp_mst_is_master_trans() (Imre)
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201001111053.24451-1-ville.syrjala@linux.intel.com
Doing any kind modeset stuff from the short hpd handler is
verboten. The ad-hoc PHY test modeset code violates this. And
by calling various link training related functions it's now
blocking further work to plumb the crtc state down into the
link training code.
Let's hack around that by pushing the PHY test stuff into the
hotplug work where it's less of a problem. Still not great but
at least acceptable. We take a few pages from the link retraining
handbook to handle the locking and whatnot.
v2: Fix the intel_dp_hotplug() return value
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200930100412.9313-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
The HDMI vs. not-HDMI check got inverted whem the bogus encoder->type
checks were eliminated. So now we're using 0 as the link rate on DP
and potentially non-zero on HDMI, which is exactly the opposite of
what we want. The original bogus check actually worked more correctly
by accident since if would always evaluate to true. Due to this we
now always use the RBR/HBR1 vswing table and never ever the HBR2+
vswing table. That is probably not a good way to get a high quality
signal at HBR2+ rates. Fix the check so we pick the right table.
Cc: stable@vger.kernel.org
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Fixes: 94641eb6c6 ("drm/i915/display: Fix the encoder type check")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200930223642.28565-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
On x64 we get:
drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c:751:10: warning: conversion from 'long unsigned int' to 'unsigned int' changes value from '18446744073709551613' to '4294967293' [-Woverflow]
The registers are 32 bit, so fix by casting to u32.
Fixes: fb43aa0acd ("drm: bridge: Add support for Cadence MHDP8546 DPI/DP bridge")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Swapnil Jakhade <sjakhade@cadence.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200929091918.24813-1-tomi.valkeinen@ti.com
Implement display w/a #1142. This supposedly fixes some underruns
with FBC+VTd. Bspec says we should use the same programming regardless
of circumstances. Apparently we should flip the magic bits before
turning on any planes so let's put this into the early w/as.
Cc: Lee Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200924194810.10293-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
CNL+ can report DIMM sizes in .5 GB units. In order to not trauncate
away the .5 GB let's switch to storing the DIMM size in Gb units.
Cc: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200929131312.12999-1-ville.syrjala@linux.intel.com
compute units that are in use.
[Why]
Allow user to know how many compute units (CU) are in use at any given
moment.
[How]
Surface files in Sysfs that allow user to determine the number of compute
units that are in use for a given process. One Sysfs file is used per
device.
Signed-off-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Reviewed-By: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
waves that are in flight.
[Why]
Allow user to know how many compute units (CU) are in use at any given
moment.
[How]
Read registers of SQ that give number of waves that are in flight
of various queues. Use this information to determine number of CU's
in use.
Signed-off-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Reviewed-By: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Be consistent and use unsigned long throughout the chunk copies to
avoid the inherent clumsiness of mixing integer types of different
widths and signs. Failing to take acount of a wider unsigned type when
using min_t can lead to treating it as a negative, only for it flip back
to a large unsigned value after passing a boundary check.
Fixes: ed13033f02 ("drm/i915/cmdparser: Only cache the dst vmap")
Testcase: igt/gen9_exec_parse/bb-large
Reported-by: "Candelaria, Jared" <jared.candelaria@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: "Candelaria, Jared" <jared.candelaria@intel.com>
Cc: "Bloomfield, Jon" <jon.bloomfield@intel.com>
Cc: <stable@vger.kernel.org> # v4.9+
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200928215942.31917-1-chris@chris-wilson.co.uk
(cherry picked from commit b7eeb2b413)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Verify that if a context is active at the time it is closed, that it is
either persistent and preemptible (with hangcheck running) or it shall
be removed from execution.
Fixes: 9a40bddd47 ("drm/i915/gt: Expose heartbeat interval via sysfs")
Testcase: igt/gem_ctx_persistence/heartbeat-close
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.7+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200928221510.26044-3-chris@chris-wilson.co.uk
(cherry picked from commit d3bb2f9b5e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Currently, we check we can send a pulse prior to disabling the
heartbeat to verify that we can change the heartbeat, but since we may
re-evaluate execution upon changing the heartbeat interval we need another
pulse afterwards to refresh execution.
v2: Tvrtko asked if we could reduce the double pulse to a single, which
opened up a discussion of how we should handle the pulse-error after
attempting to change the property, and the desire to serialise
adjustment of the property with its validating pulse, and unwind upon
failure.
Fixes: 9a40bddd47 ("drm/i915/gt: Expose heartbeat interval via sysfs")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v5.7+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200928221510.26044-2-chris@chris-wilson.co.uk
(cherry picked from commit 3dd66a94de)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We only allow persistent requests to remain on the GPU past the closure
of their containing context (and process) so long as they are continuously
checked for hangs or allow other requests to preempt them, as we need to
ensure forward progress of the system. If we allow persistent contexts
to remain on the system after the the hangcheck mechanism is disabled,
the system may grind to a halt. On disabling the mechanism, we sent a
pulse along the engine to remove all executing contexts from the engine
which would check for hung contexts -- but we did not prevent those
contexts from being resubmitted if they survived the final hangcheck.
Fixes: 9a40bddd47 ("drm/i915/gt: Expose heartbeat interval via sysfs")
Testcase: igt/gem_ctx_persistence/heartbeat-stop
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.7+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200928221510.26044-1-chris@chris-wilson.co.uk
(cherry picked from commit 7a991cd3e3)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The reordering and rebasing of commit 2e4c6c1a9d ("drm/i915: Remove
i915_request.lock requirement for execution callbacks") caused it to
revert an earlier correction. Let us restore commit 99f0a640d464
("drm/i915: Remove requirement for holding i915_request.lock for
breadcrumbs")
Fixes: 2e4c6c1a9d ("drm/i915: Remove i915_request.lock requirement for execution callbacks")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200925101107.27869-1-chris@chris-wilson.co.uk
(cherry picked from commit 35faeb7de9)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Since the debugfs may peek into the GEM contexts as the corresponding
client/fd is being closed, we may try and follow a dangling pointer.
However, the context closure itself is serialised with the ctx->mutex,
so if we hold that mutex as we inspect the state coupled in the context,
we know the pointers within the context are stable and will remain valid
as we inspect their tables.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: CQ Tang <cq.tang@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200723172119.17649-3-chris@chris-wilson.co.uk
(cherry picked from commit 102f5aa491)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
In case backoff fails with an error, we return an undefined rq,
assign err to rq correctly.
Fixes: 8a929c9eb1 ("drm/i915: Use ww pinning for intel_context_create_request()")
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200918111208.1392128-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 4316b19dee)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
As the error capture will compress user buffers as directed to by the
user, it can take an arbitrary amount of time and space. Break up the
compression loops with a call to cond_resched(), that will allow other
processes to schedule (avoiding the soft lockups) and also serve as a
warning should we try to make this loop atomic in the future.
Testcase: igt/gem_exec_capture/many-*
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200916090059.3189-2-chris@chris-wilson.co.uk
(cherry picked from commit 293f43c80c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This code should use "vma[1]" instead of "vma". The "vma" variable is a
valid pointer.
Fixes: 6b05030496 ("drm/i915: Convert i915_gem_object/client_blt.c to use ww locking as well, v2.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200911075243.GG12635@kadam
(cherry picked from commit 68ba71e3ae)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
If we create a new node, it is possible for the slab allocator to return
us a recently freed node. If that node was just retired, it will retain
the current jiffy as its node->age. There is then a miniscule window,
where as that node is retired, it will appear on the free list with an
incorrect age and be eligible for reuse by one thread, and then by a
second thread as the correct node->age is written.
Fixes: 06b73c2d0b ("drm/i915/gt: Delay taking the spinlock for grabbing from the buffer pool")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200915091417.4086-3-chris@chris-wilson.co.uk
(cherry picked from commit 9bb34ff25c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Let's not try and use PAT attributes for I915_MAP_WC if the CPU doesn't
support PAT.
Fixes: 6056e50033 ("drm/i915/gem: Support discontiguous lmem object maps")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Cc: <stable@vger.kernel.org> # v5.6+
Link: https://patchwork.freedesktop.org/patch/msgid/20200915091417.4086-2-chris@chris-wilson.co.uk
(cherry picked from commit 121ba69ffd)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
On 32b, highmem using a finite set of indirect PTE (i.e. vmap) to provide
virtual mappings of the high pages. As these are finite, map_new_virtual()
must wait for some other kmap() to finish when it runs out. If we map a
large number of objects, there is no method for it to tell us to release
the mappings, and we deadlock.
However, if we make an explicit vmap of the page, that uses a larger
vmalloc arena, and also has the ability to tell us to release unwanted
mappings. Most importantly, it will fail and propagate an error instead
of waiting forever.
Fixes: fb8621d3be ("drm/i915: Avoid allocating a vmap arena for a single page") #x86-32
References: e87666b52f ("drm/i915/shrinker: Hook up vmap allocation failure notifier")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Cc: <stable@vger.kernel.org> # v4.7+
Link: https://patchwork.freedesktop.org/patch/msgid/20200915091417.4086-1-chris@chris-wilson.co.uk
(cherry picked from commit 060bb115c2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
gfxoff is temporarily disabled for navy_flounder, since
at present the feature caused some tdr when performing
display operations.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The same ECC check has been executed in amdgpu_ras_init for vega10,
prior to gmc_v9_0_late_init.
v2: drop all atombios helper callings
v3: use bit operation
v4: correct inline comment, remove parity check statement
v5: squash in build fix
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add code to gracefuly handle any pipe reassignment
occuring on dcn3 hardware. This should only happen when new
surfaces are used for an update rather than old ones updated.
Fixes: 69fc1f4b97 ("amd/drm/display: avoid dcn3 on flip opp change for slave pipes")
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
gfxhub functions are now called from function pointers,
instead of from asic-specific functions.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Allow user to know number of compute units (CU) that are in use at any
given moment.
[How]
Read registers of SQ that give number of waves that are in flight
of various queues. Use this information to determine number of CU's
in use.
Signed-off-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Header file exports functions get_gpu_clock_counter(), get_cu_info() and
select_se_sh() that are defined to be static
Signed-off-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If we manage to hit the intel_gt_set_wedged_on_fini() while active, i.e.
module unload during a stress test, we may cancel the requests but not
clean up. This leads to a very slow module unload as we wait for
something or other to trigger the retirement flushing, or timeout and
unload with a bunch of warnings. Instead if we explicitly cancel then
cleanup on an active unload, it should be instant and quiet.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200930163253.2789-3-chris@chris-wilson.co.uk
gfxoff is temporarily disabled for navy_flounder, since
at present the feature caused some tdr when performing
display operations.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As the dpm clock table is needed during DC HW initialization.
And that (DC HW initialization) comes before smu_late_init()
where current APU dpm clock table setup is performed. So, NULL
pointer dereference will be triggered. By moving APU dpm clock
table setup to smu_hw_init(), this can be avoided.
Fixes: 02cf91c113 ("drm/amd/powerplay: postpone operations not required for hw setup to late_init")
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reported-by: Dirk Gouders <dirk@gouders.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ttm_mem_type_manager_func.get_node was changed to return -ENOSPC
instead of setting the node pointer to NULL. Unfortunately
vmwgfx still had two places where it was explicitly converting
-ENOSPC to 0 causing regressions. This fixes those spots by
allowing -ENOSPC to be returned. That seems to fix recent
regressions with vmwgfx.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Sigend-off-by: Roland Scheidegger <sroland@vmware.com>
Commit 78fe9f6394 ("drm/amd/display: Remove DISPCLK Limit Floor for Certain SMU Versions")
added a call to rn_vbios_smu_get_smu_version() to set clk_mgr->smu_ver.
That field is initialized prior to the if-statement, already.
Fixes: 78fe9f6394 (drm/amd/display: Remove DISPCLK Limit Floor for Certain SMU Versions)
Signed-off-by: Dirk Gouders <dirk@gouders.net>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Sung Lee <sung.lee@amd.com>
Cc: Yongqiang Sun <yongqiang.sun@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The state array is in the reverse order compared to other asics
(high to low rather than low to high).
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1313
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A recent attempt to fix a ref count leak in
amdgpu_display_crtc_set_config() turned out to be doing too much and
"fixed" an intended decrease as if it were a leak. Undo that part to
restore the proper balance. This is the very nature of this function
to increase or decrease the power reference count depending on the
situation.
Consequences of this bug is that the power reference would
eventually get down to 0 while the display was still in use,
resulting in that display switching off unexpectedly.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: e008fa6fb4 ("drm/amdgpu: fix ref count leak in amdgpu_display_crtc_set_config")
Cc: stable@vger.kernel.org
Cc: Navid Emamdoost <navid.emamdoost@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Properly handle clang and older versions of gcc.
Fixes: e77165bf7b ("drm/amd/display: Add DCN3 blocks to Makefile")
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove gpu_info fw support for sienna_cichlid etc., since the
information can be retrieved from discovery binary.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SMU10_UMD_PSTATE_PEAK_FCLK value should not be used to set the DPM.
Suggested-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The VG20 DIDs 66a0, 66a1 and 66a4 are used for various SKUs that may or may
not have the FRU EEPROM on it. Parse the VBIOS to check for server SKU
variants (D131 or D134) until a more general solution can be determined.
v2: Remove string-based logic, correct the VBIOS string comment
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The state array is in the reverse order compared to other asics
(high to low rather than low to high).
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1313
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit 78fe9f6394 ("drm/amd/display: Remove DISPCLK Limit Floor for Certain SMU Versions")
added a call to rn_vbios_smu_get_smu_version() to set clk_mgr->smu_ver.
That field is initialized prior to the if-statement, already.
Fixes: 78fe9f6394 (drm/amd/display: Remove DISPCLK Limit Floor for Certain SMU Versions)
Signed-off-by: Dirk Gouders <dirk@gouders.net>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Sung Lee <sung.lee@amd.com>
Cc: Yongqiang Sun <yongqiang.sun@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add one sysfs file -- "pp_od_clk_voltage" for
Raven/Raven2/Picasso APU, which is only used by dGPU like VEGA10.
This sysfs file supports the feature to modify gfx engine clock(Mhz units), it can
be used to configure the min value and the max value for gfx clock limited in the
safe range.
Command guide:
echo "s level clock" > pp_od_clk_voltage
s - adjust teh sclk level
level - 0 or 1, "0" represents the min value, "1" represents the max value
clock - the clock value(Mhz units), like 400, 800 or 1200, the value must be within the
OD_RANGE limits.
Example:
$ cat pp_od_clk_voltage
OD_SCLK:
0: 200Mhz
1: 1400Mhz
OD_RANGE:
SCLK: 200MHz 1400MHz
$ echo "s 0 600" > pp_od_clk_voltage
$ echo "s 1 1000" > pp_od_clk_voltage
$ cat pp_od_clk_voltage
OD_SCLK:
0: 600Mhz
1: 1000Mhz
OD_RANGE:
SCLK: 200MHz 1400MHz
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds a new trace event to track the PTE update
events. This specific event will provide information like:
- start and end of virtual memory mapping
- HW engine flags for the map
- physical address for mapping
This will be particularly useful for memory profiling tools
(like RMV) which are monitoring the page table update events.
V2: Added physical address lookup logic in trace point
V3: switch to use __dynamic_array
added nptes int the TPprint arguments list
added page size in the arg list
V4: Addressed Christian's review comments
add start/end instead of seg
use incr instead of page_sz to be accurate
V5: Addressed Christian's review comments:
add pid and vm context information in the event
V6: Re-sequence the variables (put pid and ctx_id first)
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It should be one copy-paste typo.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A recent attempt to fix a ref count leak in
amdgpu_display_crtc_set_config() turned out to be doing too much and
"fixed" an intended decrease as if it were a leak. Undo that part to
restore the proper balance. This is the very nature of this function
to increase or decrease the power reference count depending on the
situation.
Consequences of this bug is that the power reference would
eventually get down to 0 while the display was still in use,
resulting in that display switching off unexpectedly.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: e008fa6fb4 ("drm/amdgpu: fix ref count leak in amdgpu_display_crtc_set_config")
Cc: stable@vger.kernel.org
Cc: Navid Emamdoost <navid.emamdoost@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This addresses the following sparse warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_hw_sequencer.c:2740:6:
warning: symbol 'dce110_set_cursor_position' was not declared. Should it
be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_hw_sequencer.c:2785:6:
warning: symbol 'dce110_set_cursor_attribute' was not declared. Should
it be static?
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This addresses the following sparse warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_hw_sequencer.c:180:26:
warning: symbol 'get_color_space_type' was not declared. Should it be
static?
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
At the moment on flip opp reassignment does not work in all cases
for non root pipes.
This change simply makes sure we prefer pipes not used previously
when splitting in dcn3.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Eric Bernstein <eric.bernstein@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Vbios uses preferred timing to turn on edp but OS could use other
timing. If change pixel clock when link active, there is unexpected
garbage on monitor.
[How]
Once pixel clock changed, the driver needs to disable stream.
Signed-off-by: Chiawen Huang <chiawen.huang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Header Changes]
- Definition for retaining ABM settings during disable
- Addition of some new AUX interface definitions
- Addition of some outbox definitions
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
At the moment, some tests are failing because cur_link_settings is
invalid. As a workaround, add an option to force dio disable.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Currently, when full p-state changes are not supported, DLG parameters
are calculated for no p-state support at all. However, we are required
to always support dummy p-state changes, so we should instead calculate
DLG based on dummy p-state latency when full p-state is unsupported.
This behaviour already exists for DCN2.
[How]
- move DLG calculation inside WM calculation
- if p-state unsupported, do not recalculate for set A, instead copy from
set C, and perform DLG calculation with dummy p-state latency
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Vbios uses preferred timing to turn on edp but OS could use other
timing. If change pixel clock when link active, there is unexpected
garbage on monitor.
[How]
Once pixel clock changed, the driver needs to disable stream.
Signed-off-by: Chiawen Huang <chiawen.huang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some debug bits are not being copied from driver to fw.
[How]
Copy debug bits properly.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to use ttm_bo_init_reserved here to make sure
that the BO is pinned before it becomes visible on the LRU.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/392561/?series=82199&rev=1
Be consistent and use unsigned long throughout the chunk copies to
avoid the inherent clumsiness of mixing integer types of different
widths and signs. Failing to take acount of a wider unsigned type when
using min_t can lead to treating it as a negative, only for it flip back
to a large unsigned value after passing a boundary check.
Fixes: ed13033f02 ("drm/i915/cmdparser: Only cache the dst vmap")
Testcase: igt/gen9_exec_parse/bb-large
Reported-by: "Candelaria, Jared" <jared.candelaria@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: "Candelaria, Jared" <jared.candelaria@intel.com>
Cc: "Bloomfield, Jon" <jon.bloomfield@intel.com>
Cc: <stable@vger.kernel.org> # v4.9+
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200928215942.31917-1-chris@chris-wilson.co.uk
This patch updates dma_buf_vunmap() and dma-buf's vunmap callback to
use struct dma_buf_map. The interfaces used to receive a buffer address.
This address is now given in an instance of the structure.
Users of the functions are updated accordingly. This is only an interface
change. It is currently expected that dma-buf memory can be accessed with
system memory load/store operations.
v2:
* include dma-buf-heaps and i915 selftests (kernel test robot)
* initialize cma_obj before using it in drm_gem_cma_free_object()
(kernel test robot)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200925115601.23955-4-tzimmermann@suse.de
This patch updates dma_buf_vmap() and dma-buf's vmap callback to use
struct dma_buf_map.
The interfaces used to return a buffer address. This address now gets
stored in an instance of the structure that is given as an additional
argument. The functions return an errno code on errors.
Users of the functions are updated accordingly. This is only an interface
change. It is currently expected that dma-buf memory can be accessed with
system memory load/store operations.
v3:
* update fastrpc driver (kernel test robot)
v2:
* always clear map parameter in dma_buf_vmap() (Daniel)
* include dma-buf-heaps and i915 selftests (kernel test robot)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200925115601.23955-3-tzimmermann@suse.de
The stride field has never been used, so repurpose it to be
"blob_mem". This way, userspace can know the memory properties
of the blob if it's passed between userspace processes and
no suitable userspace API exists to transmit that knowledge.
Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
Acked-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200924003214.662-17-gurchetansingh@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The old transfer ioctls may work on blob resources, and there is no
TRANSFER_BLOB hypercall now for simplicity.
The guest may have a image view on the blob resources such that the
stride is not equal to width * bytes_per_pixel.
For host-only blobs, we can repurpose the transfer ioctls to synchronize
caches as well. For guest-only blobs, these operations are undefined
for now so leave them out.
Also, with seamless Wayland integration between guest/host looking
increasingly attractive, it also makes sense to keep track of
one value for stride.
Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
Acked-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200924003214.662-16-gurchetansingh@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
For upcoming blob resources, userspace can specify that the
resource will be used for cross-device sharing. This is mainly
for exportable blobs that will only shared with the virtgpu
display but not across devices.
Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
Acked-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200924003214.662-15-gurchetansingh@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
SCANOUT_BLOB forwards the DRM framebuffer metadata to the host. The
modifier is intentionally left out -- it may be possible to query
the host for that.
We also assume one blob resource per DRM framebuffer. That too is
an intentional simplification.
Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
Acked-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200924003214.662-14-gurchetansingh@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
A virtio-gpu vram object is based on range-based allocation.
No guest shmemfs backing, so we call drm_gem_private_object_init.
This is for host memory without any guest backing (atleast initially).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200924003214.662-12-gurchetansingh@chromium.org
Co-developed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
The availability of the host visible region means host 3D
allocations can be directly mapped in the guest.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200924003214.662-9-gurchetansingh@chromium.org
Co-developed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
Verify that if a context is active at the time it is closed, that it is
either persistent and preemptible (with hangcheck running) or it shall
be removed from execution.
Fixes: 9a40bddd47 ("drm/i915/gt: Expose heartbeat interval via sysfs")
Testcase: igt/gem_ctx_persistence/heartbeat-close
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.7+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200928221510.26044-3-chris@chris-wilson.co.uk
Currently, we check we can send a pulse prior to disabling the
heartbeat to verify that we can change the heartbeat, but since we may
re-evaluate execution upon changing the heartbeat interval we need another
pulse afterwards to refresh execution.
v2: Tvrtko asked if we could reduce the double pulse to a single, which
opened up a discussion of how we should handle the pulse-error after
attempting to change the property, and the desire to serialise
adjustment of the property with its validating pulse, and unwind upon
failure.
Fixes: 9a40bddd47 ("drm/i915/gt: Expose heartbeat interval via sysfs")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v5.7+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200928221510.26044-2-chris@chris-wilson.co.uk
We only allow persistent requests to remain on the GPU past the closure
of their containing context (and process) so long as they are continuously
checked for hangs or allow other requests to preempt them, as we need to
ensure forward progress of the system. If we allow persistent contexts
to remain on the system after the the hangcheck mechanism is disabled,
the system may grind to a halt. On disabling the mechanism, we sent a
pulse along the engine to remove all executing contexts from the engine
which would check for hung contexts -- but we did not prevent those
contexts from being resubmitted if they survived the final hangcheck.
Fixes: 9a40bddd47 ("drm/i915/gt: Expose heartbeat interval via sysfs")
Testcase: igt/gem_ctx_persistence/heartbeat-stop
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.7+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200928221510.26044-1-chris@chris-wilson.co.uk
1. Move Mediatek HDMI PHY driver from DRM folder to PHY folder
2. Convert mtk-dpi to drm_bridge API
3. Disable tmds on mt2701
-----BEGIN PGP SIGNATURE-----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=NyM2
-----END PGP SIGNATURE-----
Merge tag 'mediatek-drm-next-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next
Mediatek DRM Next for Linux 5.10
1. Move Mediatek HDMI PHY driver from DRM folder to PHY folder
2. Convert mtk-dpi to drm_bridge API
3. Disable tmds on mt2701
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200914231227.30500-1-chunkuang.hu@kernel.org
* DSI support for sm8150/sm8250
* Support for per-process GPU pagetables (finally!) for a6xx.
There are still some iommu/arm-smmu changes required to
enable, without which it will fallback to the current single
pgtable state. The first part (ie. what doesn't depend on
drm side patches) is queued up for v5.10[1].
* DisplayPort support. Userspace DP compliance tool support
is already merged in IGT[2]
* The usual assortment of smaller fixes/cleanups
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvqjuzH=Po_9EzzFsp2Xq3tqJUTKfsA2g09XY7_+6Ypfw@mail.gmail.com
Previously intel_dump_pipe_config() used to dump the full crtc state
whether or not the crtc was logically enabled or not. As that meant
occasionally dumping confusing stale garbage I changed it to
check whether the crtc is logically enabled or not. However I did
not realize that the state checker readout code does not
populate crtc_state.hw.{active,enabled}. Hence the state checker
dump would only give us a full dump of the sw state but not the hw
state. Fix that by populating those bits of the hw state as well.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Fixes: 10d75f5428 ("drm/i915: Fix plane state dumps")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200925131656.10022-2-ville.syrjala@linux.intel.com
(cherry picked from commit 504c7bd85c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
In case of DSI cmd mode, we get hw vblank counter updated after the TE
comes in, if we try to read the hw vblank counter in te handler we
wouldnt have the udpated vblank counter yet. This will lead to a state
where we would send the vblank event to the user space in the next te,
though the frame update would have completed in the first TE duration
itself. Hence switch to using software timestamp based vblank counter.
v2: Use mode_flags from crtc_state (Ville)
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200924124209.17916-6-vandita.kulkarni@intel.com
In TE Gate mode or TE NO_GATE mode on every flip we need to set the
frame update request bit. After this bit is set transcoder hardware will
automatically send the frame data to the panel in case of TE NO_GATE
mode, where it sends after it receives the TE event in case of TE_GATE
mode. Once the frame data is sent to the panel, we see the frame counter
updating.
v2: Use intel_de_read/write
v3: remove the usage of private_flags
v4: Use icl_dsi in func names if non static,
fix code formatting issues. (Jani)
v5: Send frame update request at the beginning of
pipe_update_end, use crtc_state mode_flags (Ville)
v6: Add platform and dsi checks (Ville)
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200928110834.15077-1-vandita.kulkarni@intel.com
In case of dual link, we get the TE on slave. So clear the TE on slave
DSI IIR.
If we are operating in TE_GATE mode, after we do a frame update, the
transcoder will send the frame data to the panel, after it receives a
TE. Whereas if we are operating in NO_GATE mode then the transcoder will
immediately send the frame data to the panel. We are not dealing with
the periodic command mode here.
v2: Pass only relevant masked bits to the handler (Jani)
v3: Fix the check for cmd mode in TE handler function.
v4: Use intel_handle_vblank instead of drm_handle_vblank (Jani)
v3: Use static on handler func (Jani)
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200924124209.17916-4-vandita.kulkarni@intel.com
Configure TE interrupt as part of the vblank enable call flow.
v2: Hide the private flags check inside configure_te (Jani)
v3: Fix the position of masking de_port_masked for DSI_TE.
v4: Simplify the caller of configure_te (Jani)
v5: Clear IIR, remove the usage of private_flags
v6: including icl_dsi header is not needed
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200924124209.17916-3-vandita.kulkarni@intel.com
We need details about enabling TE on which port before we enable TE
through vblank enable path. This is based on the configuration that we
receive from the VBT wrt ports, dual_link.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200924124209.17916-2-vandita.kulkarni@intel.com
Dump the sizes of the software LUTs in the state dump. Makes
it a bit easier to see which is present without having to
decode it from the gamma_mode and other bits of state.
v2: Drop a spurious "is" in commit msg (Uma)
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200925131656.10022-4-ville.syrjala@linux.intel.com
Previously intel_dump_pipe_config() used to dump the full crtc state
whether or not the crtc was logically enabled or not. As that meant
occasionally dumping confusing stale garbage I changed it to
check whether the crtc is logically enabled or not. However I did
not realize that the state checker readout code does not
populate crtc_state.hw.{active,enabled}. Hence the state checker
dump would only give us a full dump of the sw state but not the hw
state. Fix that by populating those bits of the hw state as well.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Fixes: 10d75f5428 ("drm/i915: Fix plane state dumps")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200925131656.10022-2-ville.syrjala@linux.intel.com
Enable asynchronous flips in i915 for gen9+ platforms.
v2: -Async flip enablement should be a stand alone patch (Paulo)
v3: -Move the patch to the end of the series (Paulo)
v4: -Rebased.
v5: -Rebased.
v6: -Rebased.
v7: -Rebased.
v8: -Rebased.
v9: -Rebased.
v10: -Rebased.
Signed-off-by: Karthik B S <karthik.b.s@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200921110210.21182-9-karthik.b.s@intel.com
Add the details of the implementation of asynchronous flips for i915.
v7: -Rebased.
v8: -Rebased.
v9: -Rebased.
v10: Move all documentation changes to this patch. (Ville)
Signed-off-by: Karthik B S <karthik.b.s@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200921110210.21182-8-karthik.b.s@intel.com
In Gen 9 and Gen 10 platforms, async address update enable bit is
double buffered. Due to this, during the transition from async flip
to sync flip we have to wait until this bit is updated before continuing
with the normal commit for sync flip.
v9: -Rename skl_toggle_async_sync() to skl_disable_async_flip_wa(). (Ville)
-Place the declarations appropriately as per need. (Ville)
-Take the lock before the reg read. (Ville)
-Fix comment and formatting. (Ville)
-Use IS_GEN_RANGE() for gen check. (Ville)
-Move skl_disable_async_flip_wa() to intel_pre_plane_update(). (Ville)
v10: -Rebased.
Signed-off-by: Karthik B S <karthik.b.s@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200921110210.21182-7-karthik.b.s@intel.com
This hook is added to avoid writing other plane registers in case of
async flips, so that we do not write the double buffered registers
during async surface address update.
v7: -Plane ctl needs bits from skl_plane_ctl_crtc as well. (Ville)
-Add a vfunc for skl_program_async_surface_address
and call it from intel_update_plane. (Ville)
v8: -Rebased.
v9: -Use if-else instead of return in intel_update_plane(). (Ville)
-Rename 'program_async_surface_address' to 'async_flip'. (Ville)
v10: -Check if async_flip hook is present before calling it.
Otherwise it will OOPS during legacy cursor updates. (Ville)
v11: -Rename skl_program_async_surface_address(). (Ville)
Signed-off-by: Karthik B S <karthik.b.s@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200921110210.21182-6-karthik.b.s@intel.com
Since the flip done event will be sent in the flip_done_handler,
no need to add the event to the list and delay it for later.
v2: -Moved the async check above vblank_get as it
was causing issues for PSR.
v3: -No need to wait for vblank to pass, as this wait was causing a
16ms delay once every few flips.
v4: -Rebased.
v5: -Rebased.
v6: -Rebased.
v7: -No need of irq disable if we are not doing vblank evade. (Ville)
v8: -Rebased.
v9: -Move the return in intel_pipe_update_end before tracepoint. (Ville)
v10: Rebased.
Signed-off-by: Karthik B S <karthik.b.s@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200921110210.21182-5-karthik.b.s@intel.com
If flip is requested on any other plane, reject it.
Make sure there is no change in fbc, offset and framebuffer modifiers
when async flip is requested.
If any of these are modified, reject async flip.
v2: -Replace DRM_ERROR (Paulo)
-Add check for changes in OFFSET, FBC, RC(Paulo)
v3: -Removed TODO as benchmarking tests have been run now.
v4: -Added more state checks for async flip (Ville)
-Moved intel_atomic_check_async to the end of intel_atomic_check
as the plane checks needs to pass before this. (Ville)
-Removed crtc_state->enable_fbc check. (Ville)
-Set the I915_MODE_FLAG_GET_SCANLINE_FROM_TIMESTAMP flag for async
flip case as scanline counter is not reliable here.
v5: -Fix typo and other check patch errors seen in CI
in 'intel_atomic_check_async' function.
v6: -Don't call intel_atomic_check_async multiple times. (Ville)
-Remove the check for n_planes in intel_atomic_check_async
-Added documentation for async flips. (Paulo)
v7: -Replace 'intel_plane' with 'plane'. (Ville)
-Replace all uapi.foo as hw.foo. (Ville)
-Do not use intel_wm_need_update function. (Ville)
-Add destination coordinate check. (Ville)
-Do not allow async flip with linear buffer
on older hw as it has issues with this. (Ville)
-Remove break after intel_atomic_check_async. (Ville)
v8: -Rebased.
v9: -Replace DRM_DEBUG_KMS with drm_dbg_kms(). (Ville)
-Fix comment formatting. (Ville)
-Remove gen specific checks. (Ville)
-Remove irrelevant FB size check. (Ville)
-Add missing stride check. (Ville)
-Use drm_rect_equals() instead of individual checks. (Ville)
-Call intel_atomic_check_async before state dump. (Ville)
v10: -Fix the checkpatch errors seen on CI.
v11: -Use const for all plane/crtc states. (Ville)
-Use 'switch' instead of 'if' for modifier check. (Ville)
-Move documentation changes to a single patch. (Ville)
Signed-off-by: Karthik B S <karthik.b.s@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200921110210.21182-4-karthik.b.s@intel.com
Set the Async Address Update Enable bit in plane ctl
when async flip is requested.
v2: -Move the Async flip enablement to individual patch (Paulo)
v3: -Rebased.
v4: -Add separate plane hook for async flip case (Ville)
v5: -Rebased.
v6: -Move the plane hook to separate patch. (Paulo)
-Remove the early return in skl_plane_ctl. (Paulo)
v7: -Move async address update enable to skl_plane_ctl_crtc() (Ville)
v8: -Rebased.
v9: -Rebased.
v10: -Rebased.
Signed-off-by: Karthik B S <karthik.b.s@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200921110210.21182-3-karthik.b.s@intel.com
Add enable/disable flip done functions and the flip done handler
function which handles the flip done interrupt.
Enable the flip done interrupt in IER.
Enable flip done function is called before writing the
surface address register as the write to this register triggers
the flip done interrupt
Flip done handler is used to send the page flip event as soon as the
surface address is written as per the requirement of async flips.
The interrupt is disabled after the event is sent.
v2: -Change function name from icl_* to skl_* (Paulo)
-Move flip handler to this patch (Paulo)
-Remove vblank_put() (Paulo)
-Enable flip done interrupt for gen9+ only (Paulo)
-Enable flip done interrupt in power_well_post_enable hook (Paulo)
-Removed the event check in flip done handler to handle async
flips without pageflip events.
v3: -Move skl_disable_flip_done out of interrupt handler (Paulo)
-Make the pending vblank event NULL in the beginning of
flip_done_handler to remove sporadic WARN_ON that is seen.
v4: -Calculate timestamps using flip done time stamp and current
timestamp for async flips (Ville)
v5: -Fix the sparse warning by making the function 'g4x_get_flip_counter'
static.(Reported-by: kernel test robot <lkp@intel.com>)
-Fix the typo in commit message.
v6: -Revert back to old time stamping code.
-Remove the break while calling skl_enable_flip_done. (Paulo)
v7: -Rebased.
v8: -Rebased.
v9: -Use struct drm_i915_private *i915 in new code. (Ville)
-Use intel_crtc instead of drm_crtc. (Ville)
-Do not mix the flip done and vblank hooks. (Ville)
v10: -Rebased.
Signed-off-by: Karthik B S <karthik.b.s@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200921110210.21182-2-karthik.b.s@intel.com
We already implemented the fault handler ourself,
just open code what is necessary here.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/392323/
Implement the fault handler ourself using the provided TTM functions.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/392324/
We already implemented the fault handler ourself,
just open code what is necessary here.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/392322/
Just check earlier if a BO can be page faulted in the first place.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/392321/
Starting from the JZ4725B SoC, the primary and overlay planes support
24-bit pixel modes (8 bits per color component, without dummy byte).
Add support for these in the ingenic-drm driver.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200926170501.1109197-8-paul@crapouillou.net
Until now the ingenic-drm driver supported the same pixel formats on the
F0 and F1 planes, and across all SoCs. However, the F0 plane does support
paletted 8bpp, while the F1 plane doesn't.
Furthermore, the three SoCs currently supported all have different pixel
formats available; 24bpp was added in JZ4725B, 30bpp was added in
JZ4770.
Prepare the inclusion of paletted 8bpp, 24bpp and 30bpp support by
having separate pixel format lists for F0 and F1 planes.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200926170501.1109197-5-paul@crapouillou.net
Instead of calling dmam_alloc_coherent() once for each 4-bit DMA
hardware descriptor, we can have them both in a physical memory page, as
long as they are aligned to 16 bytes. This reduces memory consumption,
and will make it easier to add more DMA descriptors in the future.
Note that the old code would not create the F0 descriptor on SoCs that
don't support multiple planes. We don't care, because:
- we don't use more memory by allocating two descriptors instead of a
single one;
- the only SoC that does not support multiple planes (JZ4740) still has
two independent DMA channels, for an unknown reason.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200926170501.1109197-4-paul@crapouillou.net
Add support for static memory reserved from Device Tree. Since we're
using GEM buffers backed by CMA, it is interesting to have an option to
specify the CMA area where the GEM buffers will be allocated.
v2: Don't abort probe if reserved memory cannot be obtained. The driver
will still work fine provided the kernel configuration is sane.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200926170501.1109197-3-paul@crapouillou.net
Old Ingenic SoCs can overclock very well, up to +50% of their nominal
clock rate, whithout requiring overvolting or anything like that, just
by changing the rate of the main PLL. Unfortunately, all clocks on the
system are derived from that PLL, and when the PLL rate is updated, so
is our pixel clock.
To counter that issue, we make sure that the panel is in VBLANK before
the rate change happens, and we will then re-set the pixel clock rate
afterwards, once the PLL has been changed, to be as close as possible to
the pixel rate requested by the encoder.
v2: Add comment about mutex usage
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200926170501.1109197-2-paul@crapouillou.net
The reordering and rebasing of commit 2e4c6c1a9d ("drm/i915: Remove
i915_request.lock requirement for execution callbacks") caused it to
revert an earlier correction. Let us restore commit 99f0a640d464
("drm/i915: Remove requirement for holding i915_request.lock for
breadcrumbs")
Fixes: 2e4c6c1a9d ("drm/i915: Remove i915_request.lock requirement for execution callbacks")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200925101107.27869-1-chris@chris-wilson.co.uk
Fix the incorrect function prototype for dp_debug_get()
in the dp_debug module to address compilation warning.
Also add prototype for msm_dp_debugfs_init() for fixing compilation
issue with other defconfigs.
changes in v2:
- add prototype for msm_dp_debugfs_init()
Fixes: f913454aae ("drm/msm/dp: move debugfs node to /sys/kernel/debug/dri/*/")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Revert the guilty change introduced by the commit below:
drm/amd/pm: postpone SOCCLK/UCLK enablement after DAL initialization(V2)
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c: In function ‘amdgpu_ras_fs_init’:
drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:1284:2: warning: ignoring return value of ‘sysfs_create_group’, declared with attribute warn_unused_result [-Wunused-result]
1284 | sysfs_create_group(&adev->dev->kobj, &group);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
v2: just print an error for sysfs group creation failure
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Merge ras sysfs creation together by calling sysfs_create_group
once, as sysfs_update_group may not work properly as expected.
v2: improve commit message
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In FLR routine, init_data_exchange is called at reset_sriov
while fini_data_exchange is not. This will duplicating work
thread.
So call fini_data_exchange before reset for SRIOV
Signed-off-by: Tiecheng Zhou <Tiecheng.Zhou@amd.com>
Signed-off-by: Bokun Zhang <Bokun.Zhang@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Refactor the driver code to use amdgpu_virt_read_pf2vf_data
and amdgpu_virt_write_vf2pf_data instead of writing all code in
one function (which is the old amdgpu_virt_init_data_exchange)
- Adding a new transaction method for VF2PF message between host
and guest driver. Guest side will periodically update VF2PF
message in the framebuffer.
In the new header, we include guest ucode information, guest
framebuffer usage, and engine usage
- Clean up the old macros since they will cause compile error if
the new transaction method is used
v2: squash in build fix
Signed-off-by: Bokun Zhang <Bokun.Zhang@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Documents PP_FEATURE_MASK enum.
Provides instructions on how to use ppfeaturemasks.
v2: improve enum definitions and add kernel command line parameters to
ppfeaturemask instructions
v3: fix alignment issues
Signed-off-by: Ryan Taylor <ryan.taylor@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
disable UMC RAS in lieu of stability issues on certain sku
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows us to set different defaults on a per asic basis. This
way we can enable noretry on dGPUs where it can increase performance
in certain cases and disable it on chips where it can be problematic.
For now the default is 0 for all asics, but we may want to try and
enable it again for newer dGPUs.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This will allow us to have different defaults per asic
in a future patch.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Properly handle clang and older versions of gcc.
Fixes: e77165bf7b ("drm/amd/display: Add DCN3 blocks to Makefile")
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
smc, sdma, sos, ta and asd fw is not used in SRIOV. Skip them to
accelerate sw_init for navi12.
v2: skip above fw in SRIOV for vega10 and sienna_cichlid
v3: directly skip psp fw loading in SRIOV
Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Reviewed-by: Emily.Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
smc fw is not needed in SRIOV, thus driver should not try to get smc
fw data.
Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Reviewed-by: Emily.Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove gpu_info fw support for sienna_cichlid etc., since the
information can be retrieved from discovery binary.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to clear event again since event always clear before wait.
This fix depend on patch:
"soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api"
Fixes: 2f965be7f9 ("drm/mediatek: apply CMDQ control flow")
Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
Reviewed-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://lore.kernel.org/r/1594136714-11650-10-git-send-email-dennis-yc.hsieh@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add clear parameter to let client decide if
event should be clear to 0 after GCE receive it.
Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://lore.kernel.org/r/1594136714-11650-9-git-send-email-dennis-yc.hsieh@mediatek.com
[mb: fix commit message]
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The HVS FIFOs are currently assigned each time we have an atomic_check
for all the enabled CRTCs.
However, if we are running multiple outputs in parallel and we happen to
disable the first (by index) CRTC, we end up changing the assigned FIFO
of the second CRTC without disabling and reenabling the pixelvalve which
ends up in a stall and eventually a VBLANK timeout.
In order to fix this, we can create a special value for our assigned
channel to mark it as disabled, and if our CRTC already had an assigned
channel in its previous state, we keep on using it.
Fixes: 87ebcd42fb ("drm/vc4: crtc: Assign output to channel automatically")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923084032.218619-2-maxime@cerno.tech
The current CRTC state reset hook in vc4 allocates a vc4_crtc_state
structure as a drm_crtc_state, and relies on the fact that vc4_crtc_state
embeds drm_crtc_state as its first member, and therefore can be safely
cast.
However, this is pretty fragile especially since there's no check for this
in place, and we're going to need to access vc4_crtc_state member at reset
so this looks like a good occasion to make it more robust.
Fixes: 6d6e500391 ("drm/vc4: Allocate the right amount of space for boot-time CRTC state.")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923084032.218619-1-maxime@cerno.tech
Since commit 9495b7e92f ("driver core: platform: Initialize dma_parms
for platform devices"), struct platform_device already provides a
dma_parms structure, so we can save allocating another one.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Replace the open coded pixel pipe selection pattern with a function.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
These two perf counters represent the total read and write
GPU bandwidth in terms of 64bits.
The used sequence was taken from Vivante kernel driver.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Replace the open coded access pattern with a function call.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
pipe_reg_read(..) iterates over all pixel pipes, selects a perf counter
register and sums the actual perf counter value. Rename the function
to reflect more what it is actual doing.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Most drivers that use VRAM helpers have only a few MiB of framebuffer
memory available. To reduce fragmentation, new BOs are now put into
system memory by default. Only pin operations are allowed to move BOs
into VRAM.
v2:
* rebased onto latest drm-tip
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200922145700.25413-4-tzimmermann@suse.de
Don't override the GEM object functions unconditionally. If the driver
sets the GEM functions, VRAM helpers will not set them. The idea has been
taken from SHMEM helpers.
v2:
* updated the commit message (Sam)
* document the new feature for drm_gem_vram_create()
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200922145700.25413-3-tzimmermann@suse.de
The drm_gem_vram_create() function is the only caller of the internal
helper drm_gem_vram_init(). Streamline the code by putting all code into
the create function.
v2:
* rebased onto latest drm-tip
* fixed typo in commit message (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200922145700.25413-2-tzimmermann@suse.de
Several GEM and PRIME callbacks have been deprecated in favor of
per-instance GEM object functions. Remove the callbacks as they are
now unused. The only exception is .gem_prime_mmap, which is still
in use by several drivers.
What is also gone is gem_vm_ops in struct drm_driver. All drivers now
use struct drm_gem_object_funcs.vm_ops instead.
While at it, the patch also improves error handling around calls
to .free and .get_sg_table callbacks.
v3:
* restore default call to drm_gem_prime_export() in
drm_gem_prime_handle_to_fd()
* return -ENOSYS if get_sg_table is not set
* drop all checks for obj->funcs
* clean up TODO list and documentation
v2:
* update related TODO item (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-23-tzimmermann@suse.de
The xlnx driver uses CMA helpers with default callback functions.
Initialize the driver structure with the rsp CMA helper macro. The
driver is being converted to use GEM object functions as part of
this change.
Two callbacks, .dumb_destroy and .gem_prime_import, were initialized
to their default implementations, so they are just kept empty now.
v2:
* initialize with DRM_GEM_CMA_DRIVER_OPS_WITH_DUMB_CREATE (Laurent)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hyun Kwon <hyun.kwon@xilinx.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-22-tzimmermann@suse.de
GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in xen. The only exception is gem_prime_mmap,
which is non-trivial to convert.
v2:
* convert xen_drm_drv_free_object_unlocked() to static
callback (Oleksandr)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-21-tzimmermann@suse.de
GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in vkms.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Melissa Wen <melissa.srw@gmail.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-20-tzimmermann@suse.de
GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces virtgpu's per-driver PRIME export
function with a per-object function.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-19-tzimmermann@suse.de
GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in vgem. The only exception is gem_prime_mmap,
which is non-trivial to convert.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Melissa Wen <melissa.srw@gmail.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-18-tzimmermann@suse.de
GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in vc4. The only exception is gem_prime_mmap,
which is non-trivial to convert.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-17-tzimmermann@suse.de
GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in tegra.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-16-tzimmermann@suse.de
GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in rockchip. The only exception is gem_prime_mmap,
which is non-trivial to convert.
v3:
* update documentation
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-15-tzimmermann@suse.de
GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in radeon.
v2:
* move object-function instance to radeon_gem.c (Christian)
* set callbacks in radeon_gem_object_create() (Christian)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-14-tzimmermann@suse.de
GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in pl111. The only exception is gem_prime_mmap,
which is non-trivial to convert.
v2:
* use drm_gem_cma_create_object_default_funcs() (Eric)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-13-tzimmermann@suse.de
GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in omapdrm.
v2:
* make omap_gem_free_object() static (Tomi)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-12-tzimmermann@suse.de
GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in nouveau.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-11-tzimmermann@suse.de
GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in msm. The only exception is gem_prime_mmap,
which is non-trivial to convert.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-10-tzimmermann@suse.de
GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in mediatek. The only exception is gem_prime_mmap,
which is non-trivial to convert.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-9-tzimmermann@suse.de
The i.MX DCSS driver uses CMA helpers with default callback functions.
Initialize the driver structure with the rsp CMA helper macro. The
driver is being converted to use GEM object functions as part of
this change.
Two callbacks, .gem_prime_export and .gem_prime_import, were initialized
to their default implementations, so they are just kept empty now.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-8-tzimmermann@suse.de
GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in i915.
v2:
* move object-function instance to i915_gem_object.c (Jani)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-7-tzimmermann@suse.de
GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in gma500.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-6-tzimmermann@suse.de
GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in exynos. The only exception is gem_prime_mmap,
which is non-trivial to convert.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-5-tzimmermann@suse.de
GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in etnaviv. The only exception is gem_prime_mmap,
which is non-trivial to convert.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-4-tzimmermann@suse.de
GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in armada.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-3-tzimmermann@suse.de
GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in amdgpu. The only exception is gem_prime_mmap,
which is non-trivial to convert.
v3:
* remove amdgpu_object.c from patch (Christian)
v2:
* move object-function instance to amdgpu_gem.c (Christian)
* set callbacks in amdgpu_gem_object_create() (Christian)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-2-tzimmermann@suse.de
DMA_ATTR_NON_CONSISTENT is a no-op except on PA-RISC and a few MIPS
configs, so don't set it in this ARM specific driver part.
Signed-off-by: Christoph Hellwig <hch@lst.de>
DMA_ATTR_NON_CONSISTENT is a no-op except on PA-RISC and a few MIPS
configs, so don't set it in this ARM specific driver.
Signed-off-by: Christoph Hellwig <hch@lst.de>
drm/i915 fixes for v5.9-rc7:
- Fix selftest reference to stack data out of scope
- Fix GVT null pointer dereference
- Backmerge from Linus' master to fix build
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87zh5fpmha.fsf@intel.com
The panel is able to work when dsi clock is non-continuous, thus
the system power consumption can be reduced using such feature.
Add MIPI_DSI_CLOCK_NON_CONTINUOUS to panel's mode_flags.
Changes in v2:
- Added my signed-off
Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200922074253.28810-1-yannick.fertre@st.com
The panel is able to receive commands in LP. The current hack to
force backlight commands in HS was due to workaround an incorrect
settings on DSI controller that prevents sending LP commands while
video out was active.
Remove the hack that forces HS commands.
Changes in v2:
- Added my signed-off
Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200922074242.28719-1-yannick.fertre@st.com
This should make it harder for the kernel to corrupt the debug object
descriptor, used to call functions to fixup state and track debug objects,
by moving the structure to read-only memory.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200815004027.2046113-3-swboyd@chromium.org
The panel is able to work when dsi clock is non-continuous, thus
the system power consumption can be reduced using such feature.
Add MIPI_DSI_CLOCK_NON_CONTINUOUS to panel's mode_flags.
Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200918114736.11322-1-yannick.fertre@st.com
The core move code currently handles use_tt moves, for radeon
this was being handled also in the driver, but not using the same
paths.
If moving between TT/SYSTEM (all the use_tt paths on radeon) use
the core move function.
Eventually the core will be flipped over to calling the driver.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200924051845.397177-5-airlied@gmail.com
The core move code currently handles use_tt moves, for amdgpu
this was being handled also in the driver, but not using the same
paths.
If moving between TT/SYSTEM (all the use_tt paths on amdgpu) use
the core move function.
Eventually the core will be flipped over to calling the driver.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200924051845.397177-4-airlied@gmail.com
When validating a "YCbCr 4:2:0 only" mode we must take into
account the fact that we're going to be outputting YCbCr
4:2:0 or 4:4:4 (when a DP->HDMI protocol converter is doing
the 4:2:0 downsampling). For YCbCr 4:4:4 the minimum output
bpc is 8, for YCbCr 4:2:0 it'll be half that. The currently
hardcoded 6bpc is only correct for RGB 4:4:4, which we will
never use with these kinds of modes. Figure out what we're
going to output and use the correct min bpp value to validate
whether the link has sufficient bandwidth.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200917214335.3569-3-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Pass the output_format directly to intel_dp_{min,output}_bpp()
rather than passing in the crtc_state and digging out the
output_format inside the functions. This will allow us to reuse
the functions for mode validation purposes.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200917214335.3569-2-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Stop using TTM_PL_FLAG_NO_EVICT.
Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/391617/?series=81973&rev=1
Stop using TTM_PL_FLAG_NO_EVICT.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/391603/?series=81973&rev=1
Implement in the driver instead since it is the only user of that function.
v2: fix usage of ttm_bo_init_reserved
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/391614/?series=81973&rev=1
As an alternative to the placement flag add a
pin count to the ttm buffer object.
v2: add dma_resv_assert_help() calls
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/391596/?series=81973&rev=1
Since the debugfs may peek into the GEM contexts as the corresponding
client/fd is being closed, we may try and follow a dangling pointer.
However, the context closure itself is serialised with the ctx->mutex,
so if we hold that mutex as we inspect the state coupled in the context,
we know the pointers within the context are stable and will remain valid
as we inspect their tables.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: CQ Tang <cq.tang@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200723172119.17649-3-chris@chris-wilson.co.uk
The gamma LUT has to be reloaded after changing the primary plane's
color format. This used to be done implicitly by the CRTC atomic_enable()
helper after updating the primary plane. With the recent reordering of
the steps, the primary plane's setup was moved last and invalidated
the gamma LUT. Fix this by setting the LUT from within atomic_flush().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: 2f0ddd89fe ("drm/ast: Enable CRTC before planes")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200922144655.23624-1-tzimmermann@suse.de
When roll over detected for seq_num_m, we shouldn't continue with stream
management with rolled over value.
So we are terminating the stream management retry, on roll over of the
seq_num_m.
v2:
using drm_dbg_kms instead of DRM_DEBUG_KMS [Anshuman]
v3:
dev_priv is used as i915 [JaniN]
v4:
roll over is detected at the start of the stream management.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com> [v3]
Tested-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923132435.17039-3-anshuman.gupta@intel.com
As per the HDCP2.2 compliance test 1B-10 expectation, when stream
management for a repeater fails, we retry thrice and when it fails
in all retries, HDCP2.2 reauthentication aborted at kernel.
v2:
seq_num_m++ is extended for steam management failures too.[Anshuman]
v3:
use drm_dbg_kms instead of DRM_DEBUG_KMS [Anshuman]
v4:
dev_priv is used as i915 [JaniN]
v5:
Few improvisements are done [Sean]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Tested-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923132435.17039-2-anshuman.gupta@intel.com
When we swapout/in a BO we try to change the caching
attributes of the pages before/after doing the copy.
On x86 this is done by calling set_pages_uc(),
set_memory_wc() or set_pages_wb() for not highmem pages
to update the linear mapping of the page.
On all other platforms we do exactly nothing.
Now on x86 this is unnecessary because copy_highpage() will
either create a temporary mapping of the page which is wb
anyway and destroyed immediately again or use the linear
mapping with the correct caching attributes.
So stop this nonsense and just keep the caching as it is and
return an error when a driver tries to change the caching of
an already populated TT object.
This is much more defensive since changing caching
attributes is platform and driver specific and usually
doesn't work after the page was initially allocated.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/391293/
The GuC communication enabled/disabled messages are too noisy in info
level. Convert them from info to debug level, and switch to device based
logging while at it.
Reported-by: Karol Herbst <kherbst@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200917165056.29766-1-jani.nikula@intel.com
The HVS has three FIFOs that can be assigned to a number of PixelValves
through a mux.
However, changing that FIFO requires that we disable and then enable the
pixelvalve, so we want to assign FIFOs to all the enabled CRTCs, and not
just the active ones.
Fixes: 87ebcd42fb ("drm/vc4: crtc: Assign output to channel automatically")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200918145918.101068-1-maxime@cerno.tech
Since we store a pointer to the fake iommu device that is allocated on
the stack, as soon as we leave the function it goes out of scope and any
future dereference is undefined behaviour. Just in case we may need to
look at the fake iommu device after initialiation, move the allocation
from the stack into the data.
Fixes: 01b9d4e211 ("iommu/vt-d: Use dev_iommu_priv_get/set()")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200916105022.28316-2-chris@chris-wilson.co.uk
(cherry picked from commit 9f9f4101fc)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- dev: More devm_drm convertions and removal of drm_dev_init
Driver Changes:
- i915: selftests improvements
- panfrost: support for Amlogic SoC
- vc4: one fix
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCX2jGxQAKCRDj7w1vZxhR
xR3DAQCiZOnaxVcY49iG4343Z1aHHaIEShbnB0bDdaWstn7kiQD/UXBXUoOSFoFQ
FkTsW31JsdXNnWP5e6/eJd2Lb6waVAA=
=VlsU
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2020-09-21' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.10:
UAPI Changes:
Cross-subsystem Changes:
- virtio: Merged a PR for patches that will affect drm/virtio
Core Changes:
- dev: More devm_drm convertions and removal of drm_dev_init
- atomic: Split out drm_atomic_helper_calc_timestamping_constants of
drm_atomic_helper_update_legacy_modeset_state
- ttm: More rework
Driver Changes:
- i915: selftests improvements
- panfrost: support for Amlogic SoC
- vc4: one fix
- tree-wide: conversions to devm_drm_dev_alloc,
- ast: simplifications of the atomic modesetting code
- panfrost: multiple fixes
- vc4: multiple fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200921152956.2gxnsdgxmwhvjyut@gilmour.lan
- Fill asoc card owner in vc4.
- Program secondary CSC correctly in sun4i, and extend
register mapping to cover secondary CSC registers.
-----BEGIN PGP SIGNATURE-----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=AYyq
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2020-09-18' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v5.9-rc6:
- Fill asoc card owner in vc4.
- Program secondary CSC correctly in sun4i, and extend
register mapping to cover secondary CSC registers.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e3ab56cf-3b8e-9b21-f1b6-9a4989a52996@linux.intel.com
- Reduce INTEL_DISPLAY_ENABLED to just removed outputs treating it as disconnected (Ville)
- Introducing new AUX, DVO, and TC ports and refactoring code around hot plug interrupts for those. (Ville)
- Centralize PLL_ENABLE register lookup (Anusha)
- Improvements around DP downstream facing ports (DFP). (Ville)
- Enable YCbCr 444->420 conversion for HDMI DFPs. Ville
- Remove the old global state on Display's atomic modeset (Ville)
- Nuke force_min_cdclk_changed (Ville)
- Extend a TGL W/A to all SKUs and to RKL (Swathi)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAl9jzm4ACgkQ+mJfZA7r
E8otXgf/V0gGTWSo/CUiBIDjW6jn9f/1pRmF2W0a0M8duLwlFMGVj/TGecgHRTNf
ZHd66tqb7v2wxc+YouGYYZNcKyWwdH8nhTEjn8Zt3cIc2lweh3cWKIr0S+MiBQGo
klaq+knIbr9gk3tJS4gvM0OQv0lPoXp6Gu8FsTAfmvkdt8L93OeNpmbA4TtSFbv5
sVm6e4LWI36TZuDO5VRDHTfLrQ7XkVte5sk2CzRRap+L77+RpBwD8p+QovRmNK4Q
hTlfDHrLZR2XGpeTlqnqfzYq210hNyDspdhTENcnFrrxtB6pvd/CfOGRqEm/9MvX
A37jLJfTtpeLRlQJDPt3KzOG581a+A==
=gR/1
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2020-09-17' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
Driver Changes:
- Reduce INTEL_DISPLAY_ENABLED to just removed outputs treating it as disconnected (Ville)
- Introducing new AUX, DVO, and TC ports and refactoring code around hot plug interrupts for those. (Ville)
- Centralize PLL_ENABLE register lookup (Anusha)
- Improvements around DP downstream facing ports (DFP). (Ville)
- Enable YCbCr 444->420 conversion for HDMI DFPs. Ville
- Remove the old global state on Display's atomic modeset (Ville)
- Nuke force_min_cdclk_changed (Ville)
- Extend a TGL W/A to all SKUs and to RKL (Swathi)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200918173013.GA748558@intel.com
This is a handful of patches that add bridge support for Tegra devices
and fix a couple of minor issues.
-----BEGIN PGP SIGNATURE-----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=Ojrd
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-5.10-rc1' of ssh://git.freedesktop.org/git/tegra/linux into drm-next
drm/tegra: Changes for v5.10-rc1
This is a handful of patches that add bridge support for Tegra devices
and fix a couple of minor issues.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200921121245.3953659-1-thierry.reding@gmail.com
Modify the comment typo: "definately" -> "definitely".
Signed-off-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the function dal_ddc_service_query_ddc_data,
get rid of dal_ddc_i2c_payloads_destroy, call
dal_vector_destruct() directly.
This change is to make the code run a bit fast.
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Changes since V1:
*get rid of dal_ddc_i2c_payloads_destroy, call
dal_vector_destruct() directly.
Link for V1:
*https://lore.kernel.org/patchwork/patch/1309014/
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Change the comment typo: "programm" -> "program".
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Change the comment typo: "programm" -> "program".
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Added IP block section to amdgpu.rst.
Added more documentation to amd_ip_funcs.
Created documentation for amd_ip_block_type.
v2: Provides a more detailed DOC section on IP blocks
v3: Clarifies the IP block list. Adds info on IP block enumeration.
Signed-off-by: Ryan Taylor <ryan.taylor@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
mmHDP_READ_CACHE_INVALIDATE register is in HDP not in NBIO
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As this is already set inside the implementation of
smu_set_watermarks_table().
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As they have no real dependence. And for Navi1x, the socclk/uclk dpms
are enabled after DAL initialization.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise, that will be always true for Navi14.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GCEA/MMHUB EA error should not result to DF freeze, this is
fixed in next generation, but for some reasons the GCEA/MMHUB
EA error will result to DF freeze in previous generation,
diver should avoid to indicate GCEA/MMHUB EA error as hw fatal
error in kernel message by read GCEA/MMHUB err status registers.
Changed from V1:
make query_ras_error_status function more general
make read mmhub er status register more friendly
Changed from V2:
move ras error status query function into do_recovery workqueue
Changed from V3:
remove useless code from V2, print GCEA error status
instance number
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SMU10_UMD_PSTATE_PEAK_FCLK value should not be used to set the DPM.
Suggested-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Different mclk dpm policy will be applied based on the VRAM
width.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As per DP-1.3, First check DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT.
If DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT is 1,read the DP_DP13_DPCD_REV to
get the faster capability.
If DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT is 0,read DP_DPCD_REV.
Signed-off-by: Koba Ko <koba.ko@canonical.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
[added aux name to drm_dbg_kms() call]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200922065313.4794-1-koba.ko@canonical.com
The name of the argument is different, causing those warnings:
./drivers/gpu/drm/drm_edid.c:3754: warning: Function parameter or member 'video_code' not described in 'drm_display_mode_from_cea_vic'
./drivers/gpu/drm/drm_edid.c:3754: warning: Excess function parameter 'vic' description in 'drm_display_mode_from_cea_vic'
Fixes: 7af655bce2 ("drm/dp: Add drm_dp_downstream_mode()")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200922175357.42998-3-lyude@redhat.com
As warned by kernel-doc:
./drivers/gpu/drm/drm_dp_helper.c:385: warning: Function parameter or member 'type' not described in 'drm_dp_downstream_is_type'
./drivers/gpu/drm/drm_dp_helper.c:886: warning: Function parameter or member 'dev' not described in 'drm_dp_downstream_mode'
Some function parameters weren't documented.
Fixes: 38784f6f88 ("drm/dp: Add helpers to identify downstream facing port types")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200922175357.42998-2-lyude@redhat.com
[Header Changes]
- Add new SCRATCH0 status bits for detecting restore state
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
HDMI requires fallback to TMDS by redetection
in order to switch PHY settings.
This avoids black out when link training fail
during mode setting, link quality update,
disable driver sequence.
[How]
Allow driver to redetect HDMI displays
based on retraining or fallback mechanism.
Signed-off-by: Chris Park <Chris.Park@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When running a game/benchmark with v-sync disabled, disabling a plane
(which is v-sync) can cause an underflow. This is due to flips that are
pending before pipe locking being applied after locks are released and
pipes have been re-arranged or disconnected. This can potentially apply
a flip on the incorrect pipe.
[How]
Check that any pending flips are cleared before locking any pipes to
ensure flips are applied on the correct pipes.
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For DMUB implementation of PSR, the 'wait' parameter,
used to determine if driver should wait for PSR enable/disable,
is not implemented correctly.
[How]
Implement wait for PSR enable/disable.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Regression is caused by previous change with attempt to correct the
extended cr aux rd interval delay due to mis interpretation of the DP specs.
The change turns out not working well with certain RXs.
So we decided to keep the cr aux rd interval logic as before.
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
In DCN10 when a panel with YCbCr420 capability is connected via
USB-C to HDMI active dongle, no YCbCr420 option is listed in
Radeon settings.
[HOW]
Enable DP YCbCr420 mode support for DCN10
Signed-off-by: Gary Li <gary.li@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
When disabling DP video, the current REG_WAIT timeout
of 50ms is too low for certain cases with very high
VSYNC intervals.
[HOW]
Increase the timeout to 102ms, so that
refresh rates as low as 10Hz can be handled properly.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: <stable@vger.kernel.org>
[WHY]
Only the leftmost ODM pipe should be offset when scaling. A previous
code change was intended to implement this policy, but a section of code
was overlooked.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: <stable@vger.kernel.org>
[Why]
We dont's turn off backlight before power off eDP (VDD),
which is a violation of eDP specs.
[How]
Power off eDP backlight before power off eDP
Signed-off-by: Peikang Zhang <peikang.zhang@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
dce_is_panel_backlight_on() will return wrong value if
LVTMA_BLON_OVRD is 0
[How]
When LVTMA_BLON_OVRD is 0, read
LVTMA_PWRSEQ_TARGET_STATE instead
Signed-off-by: Peikang Zhang <peikang.zhang@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since we're dynamically allocating the CPU VCRAT, use kvmalloc in case
the allocation size is huge.
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdkfd is dumping a stack during initialization.
kfd_procfs_add_sysfs_stats is being called twice. This removes one of
them.
Fixes: 4327bed2ff ("drm/amdkfd: Add process eviction counters to sysfs")
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Philip Cox <Philip.Cox@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Always start vblank timer, but only calls vblank function
when vblank is enabled.
This is used to fix the dead lock issue.
When drm_crtc_vblank_off want to disable vblank,
it first get event_lock, and then call hrtimer_cancel,
but hrtimer_cancel want to wait timer handler function finished.
Timer handler also want to aquire event_lock in drm_handle_vblank.
Signed-off-by: Emily.Deng <Emily.Deng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
read/writes to aux_dpcd_* sysfs entries leads to system
reboot or hang.
Hence fix the handling of input data and reporting of errors
appropriately to the user space.
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move doorbell allocation for a process into kfd device and
allocate doorbell space in each PDD during process creation.
Currently, KFD manages its own doorbell space but for some
devices, amdgpu would allocate the complete doorbell
space instead of leaving a chunk of doorbell space for KFD to
manage. In a system with mix of such devices, KFD would need
to request process doorbell space based on the type of device,
either from amdgpu or from its own doorbell space.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of guessing at a sufficient size for the CPU VCRAT, base the
size on the number of online NUMA nodes.
v2: fix warning
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remember KFD module initializaton status in a global variable. Skip KFD
device probing when the module was not initialized. Other amdgpu_amdkfd
calls are then protected by the adev->kfd.dev check.
Also print a clear error message when KFD disables itself. Amdgpu
continues its initialization even when KFD failed.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We found two unused variables new_cnt and old_cnt when build kernel with
W=1.
So delete it.
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Leave the inuse count intact on map failure to keep the accounting
accurate.
Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
In the case where we have a back-to-back submission that shares the same
BO, this BO will be prematurely moved to inactive_list while retiring the
first submit. But it will be still part of the second submit which is
being processed by the GPU. Now, if the shrinker happens to be triggered at
this point, it will result in a premature purging of this BO.
To fix this, we need to refcount BO while doing submit and retire. Then,
it should be moved to inactive list when this refcount becomes 0.
Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The reference to the VSP device acquired with of_find_device_by_node()
in rcar_du_vsp_init() is never released. Fix it with a drmm action,
which gets run both in the probe error path and in the remove path.
Fixes: 6d62ef3ac3 ("drm: rcar-du: Expose the VSP1 compositor through KMS planes")
Reported-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The rcar_dw_hdmi driver is also used on Renesas RZ/G2 SoCs. Update the
Kconfig entry description to reflect this.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The DU driver handles non-visible planes (fully clipped by the display's
boundaries) by considering them as disabled. It thus disables the plane
at the hardware level when the plane is moved off-screen. However, if
the plane was previously disabled and is non-visible when it gets
enabled, the attempt to disable it crashes, as the plane wasn't
previously enabled. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
When creating a frame buffer, the driver verifies that the pitches for
the chroma planes match the luma plane. This is done incorrectly for
fully planar YUV formats, without taking horizontal subsampling into
account. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
The LVDS encoder on RZ/G2H (R8A774E1) SoC is identical to R-Car Gen3 so
just reuse the rcar_lvds_gen3_info structure to hookup R8A774E1 to LVDS
encoder driver.
Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Hookup RZ/G2H (R8A774E1) to DU driver. R8A774E1 has one RGB output,
one LVDS output and one HDMI output.
Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Add the support for enabling optional regulator that may be used as VCC
source.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Replaced 'error' variable with 'ret']
[Renamed regulator from 'vcc' to 'power']
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Commit 7053e0eab4 ("drm/vram-helper: stop using TTM placement flags")
cleared the BO placement flags if top-down placement had been selected.
Hence, BOs that were supposed to go into VRAM are now placed in a default
location in system memory.
Trying to scanout the incorrectly pinned BO results in displayed garbage
and an error message.
[ 146.108127] ------------[ cut here ]------------
[ 146.1V08180] WARNING: CPU: 0 PID: 152 at drivers/gpu/drm/drm_gem_vram_helper.c:284 drm_gem_vram_offset+0x59/0x60 [drm_vram_helper]
...
[ 146.108591] ast_cursor_page_flip+0x3e/0x150 [ast]
[ 146.108622] ast_cursor_plane_helper_atomic_update+0x8a/0xc0 [ast]
[ 146.108654] drm_atomic_helper_commit_planes+0x197/0x4c0
[ 146.108699] drm_atomic_helper_commit_tail_rpm+0x59/0xa0
[ 146.108718] commit_tail+0x103/0x1c0
...
[ 146.109302] ---[ end trace d901a1ba1d949036 ]---
Fix the bug by keeping the placement flags. The top-down placement flag
is stored in a separate variable.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Fixes: 7053e0eab4 ("drm/vram-helper: stop using TTM placement flags")
Cc: Christian König <christian.koenig@amd.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200921142536.4392-1-tzimmermann@suse.de
Since commit 9495b7e92f ("driver core: platform: Initialize dma_parms
for platform devices") driver core handles allocation of the dma_parms
structure for platform device, so there is no need to manually allocate
nor free it.
Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This eliminates the following sparse warning:
drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c:217:15: warning: symbol
'vint_table' was not declared. Should it be static?
While at it, make the table const as it is never modified.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200916132301.2914017-1-yanaijie@huawei.com
Fix unused but set variable warning building with `make W=1`:
drivers/gpu/drm/imx/dcss/dcss-plane.c:270:6: warning:
variable ‘pixel_format’ set but not used [-Wunused-but-set-variable]
u32 pixel_format;
^~~~~~~~~~~~
Fixes: 9021c317b7 ("drm/imx: Add initial support for DCSS on iMX8MQ")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200911014414.4663-1-bobo.shaobowang@huawei.com
The vc4 display engine has a first controller called the HVS that will
perform the composition of the planes. That HVS has 3 FIFOs and can
therefore compose planes for up to three outputs. The timings part is
generated through a component called the Pixel Valve, and the BCM2711 has 6
of them.
Thus, the HVS has some bits to control which FIFO gets output to which
Pixel Valve. The current code supports that muxing by looking at all the
CRTCs in a new DRM atomic state in atomic_check, and given the set of
constraints that we have, assigns FIFOs to CRTCs or reject the mode
entirely. The actual muxing will occur during atomic_commit.
However, that doesn't work if only a fraction of the CRTCs' state is
updated in that state, since it will ignore the CRTCs that are kept running
unmodified, and will thus unassign its associated FIFO, and later disable
it.
In order to make the code work as expected, let's pull the CRTC state of
all the enabled CRTC in our atomic_check so that we can operate on all the
running CRTCs, no matter whether they are affected by the new state or not.
Fixes: 87ebcd42fb ("drm/vc4: crtc: Assign output to channel automatically")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200917121623.42023-1-maxime@cerno.tech
Update kernel-doc line comments to fix warnings reported by make W=1.
drivers/gpu/drm/ttm/ttm_memory.c:271: warning: Function parameter or
member 'glob' not described in 'ttm_shrink'
drivers/gpu/drm/ttm/ttm_memory.c:271: warning: Function parameter or
member 'from_wq' not described in 'ttm_shrink'
drivers/gpu/drm/ttm/ttm_memory.c:271: warning: Function parameter or
member 'extra' not described in 'ttm_shrink'
drivers/gpu/drm/ttm/ttm_memory.c:271: warning: Function parameter or
member 'ctx' not described in 'ttm_shrink'
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/391317/
Signed-off-by: Christian König <christian.koenig@amd.com>
This adds the required GPU quirks, including the quirk in the PWR
registers at the GPU reset time and the IOMMU quirk for shareability
issues observed on G52 in Amlogic G12B SoCs.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200916150147.25753-4-narmstrong@baylibre.com
The T820, G31 & G52 GPUs integrated by Amlogic in the respective GXM,
G12A/SM1 & G12B SoCs needs a quirk in the PWR registers at the GPU reset
time.
Since the Amlogic's integration of the GPU cores with the SoC is not
publicly documented we do not know what does these values, but they
permit having a fully functional GPU running with Panfrost.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[Steven: Fix typo in commit log]
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200916150147.25753-3-narmstrong@baylibre.com
The T820, G31 & G52 GPUs integrated by Amlogic in the respective GXM,
G12A/SM1 & G12B SoCs needs a quirk in the PWR registers after each reset.
This adds a callback in the device compatible struct of permit this.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[Steven: Fix typo in commit log]
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200916150147.25753-2-narmstrong@baylibre.com
Convert to using devm_drm_dev_alloc(),
as drm_dev_init() is going away.
v2: Remove drm_dev_put() since
a) devres doesn't do refcounting, see
Documentation/driver-api/driver-model/devres.rst,
Section 4, paragraph 1; and since
b) devres acts as garbage collector when
the DRM device's parent's devres "action" callback
is called to free the container device (amdgpu_device),
which embeds the DRM dev.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200918132505.2316382-4-daniel.vetter@ffwll.ch
To avoid having to create all the device and driver scaffolding we
just manually create and destroy a devres_group.
v2: Rebased
v3: use devres_open/release_group so we can use devm without real
hacks in the driver core or having to create an entire fake bus for
testing drivers. Might want to extract this into helpers eventually,
maybe as a mock_drm_dev_alloc or test_drm_dev_alloc.
v4:
- Fix IS_ERR handling (Matt)
- Delete surplus put_device() in mock_device_release (intel-gfx-ci)
v5:
- do not switch to device_add - it breaks runtime pm in the tests and
with the devres_group_add/release no longer needed for automatic
cleanup (CI). Update commit message to match.
- print correct error in pr_err (Matt)
v6: Remove now unused err variable (CI).
v7: More warning fixes ...
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> (v3)
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com> (v4)
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200919134032.2488403-1-daniel.vetter@ffwll.ch
Just some prep work before we rework the lifetime handling, which
requires replacing all the drm_dev_put in selftests by something else.
v2: Don't go with a static inline, upsets the header tests and
separation.
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200918132505.2316382-2-daniel.vetter@ffwll.ch
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and also it prints the error value.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and also it prints the error value.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The dependency on interconnect in the Kconfig was introduced to avoid
the case of interconnect=m and driver=y, but the interconnect framework
has been converted from tristate to bool now. Remove the dependency as
the framework can't be a module anymore.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Commit 604234f336 ("drm/msm: Enable expanded apriv support for a650")
was checking the result of adreno_is_a650() before the gpu revision
got probed in adreno_gpu_init() so it was always coming across as
false. Snoop into the revision ID ahead of time to correctly set the
hw_apriv flag so that it can be used by msm_gpu to properly setup
global buffers.
Fixes: 604234f336 ("drm/msm: Enable expanded apriv support for a650")
Reported-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Tested-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Rob Clark <robdclark@chromium.org>
We shouldn't be waiting for an event here with a timeout of 100ms when
we're not in the 'timeout' arm of the if condition. Instead we should be
sleeping in the interruptible state (S) until something happens and we
need to wakeup. Right now this kthread is running almost all the time
because it sleeps for 100ms, wakes up, sees there's nothing to do, and
then starts the process all over again. Looking at top it shows up in
the D state (uninterruptible) because it uses wait_event_timeout(). FIx
this up.
Cc: Tanmay Shah <tanmay@codeaurora.org>
Cc: Kuogee Hsieh <khsieh@codeaurora.org>
Reported-by: Douglas Anderson <dianders@chromium.org>
Fixes: 8ede2ecc3e ("drm/msm/dp: Add DP compliance tests on Snapdragon Chipsets")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Kuogee Hsieh <khsieh@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
smu_post_init needs to enable SMU feature, while this require
virtualization off. Skip it since this feature is not used in SRIOV.
v2: move the check to the early stage of smu_post_init.
v3: fix typo
Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Reviewed-by: Emily.Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For CDR disabled case, the dummy reads workaround is not needed.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add J721E wrapper for mhdp, which sets up the clock and data muxes.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Yuti Amonkar <yamonkar@cadence.com>
Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Add a new DRM bridge driver for Cadence MHDP8546 DPTX IP used in TI J721E
SoC. MHDP DPTX IP is the component that complies with VESA DisplayPort (DP)
and embedded Display Port (eDP) standards. It integrates uCPU running the
embedded Firmware (FW) interfaced over APB interface.
Basically, it takes a DPI stream as input and outputs it encoded in DP
format. Currently, it supports only SST mode.
Co-developed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Co-developed-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Signed-off-by: Yuti Amonkar <yamonkar@cadence.com>
Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
As the last user was eliminated in commit e21fecdcde40 ("drm/i915/gt:
Distinguish the virtual breadcrumbs from the irq breadcrumbs"), we can
remove the function. One less implementation detail creeping beyond its
scope.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826132811.17577-16-chris@chris-wilson.co.uk
Shrink the hold time for the error capture mutex to just around the
acquire/release of the PTE used for reading back the object via the
Global GTT. For platforms that do not need the GGTT read back, we can
skip the mutex entirely and allow concurrent error capture. Where we do
use the GGTT, by restricting the hold time around the slow readback and
compression, we are more resilient against softlockups (khungtaskd) as
the heartbeat may well also trigger an error while the first is on
going, and this allows the heartbeat reset to skip past the capture and
not be stalled.
Testcase: igt/gem_exec_capture/many-*
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200916090059.3189-3-chris@chris-wilson.co.uk
As the error capture will compress user buffers as directed to by the
user, it can take an arbitrary amount of time and space. Break up the
compression loops with a call to cond_resched(), that will allow other
processes to schedule (avoiding the soft lockups) and also serve as a
warning should we try to make this loop atomic in the future.
Testcase: igt/gem_exec_capture/many-*
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200916090059.3189-2-chris@chris-wilson.co.uk
When debugging the engine state, include the user properties that may,
or may not, have been adjusted by the user/test.
For example,
vecs0
...
Properties:
heartbeat_interval_ms: 2500 [default 2500]
max_busywait_duration_ns: 8000 [default 8000]
preempt_timeout_ms: 640 [default 640]
stop_timeout_ms: 100 [default 100]
timeslice_duration_ms: 1 [default 1]
Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200916090059.3189-1-chris@chris-wilson.co.uk
Switch from magic numbers to defines for AV1 clockgating.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reduce the eviction and restore messages from INFO level to DEBUG level.
Signed-off-by: Philip Cox <Philip.Cox@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add per-process eviction counters to sysfs to keep track of
how many eviction events have happened for each process.
v2: rename the stats dir, and track all evictions per process, per device.
v3: Simplify the stats kobject handling and cleanup.
v4: more code cleanup
Signed-off-by: Philip Cox <Philip.Cox@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Extending the module parameter debug_evictions to also print a stack
trace when the eviction code path is called.
Signed-off-by: Philip Cox <Philip.Cox@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Return value should be -EINVAL rather than EINVAL
Fixes: f83a9991648bb("drm/amd/powerplay: add Vega10 powerplay support (v5)")
Fixes: 2cac05dee6e30("drm/amd/powerplay: add the hw manager for vega12 (v4)")
Cc: Eric Huang <JinHuiEric.Huang@amd.com>
Cc: Evan Quan <evan.quan@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Xiaoliang Pang <dawning.pang@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes coccicheck warnig:
drivers/gpu/drm/amd/display/dc/dml/dcn30/display_rq_dlg_calc_30.c:282:12-42:
duplicated argument to && or ||
drivers/gpu/drm/amd/display/dc/dml/dcn30/display_mode_vba_30.c:3240:12-42:
duplicated argument to && or ||
drivers/gpu/drm/amd/display/dc/dml/dcn30/display_mode_vba_30.c:5520:7-91:
duplicated argument to && or ||
drivers/gpu/drm/amd/display/dc/dml/dcn30/display_mode_vba_30.c:5309:86-122:
duplicated argument to && or ||
Fixes: 6725a88f88 ("drm/amd/display: Add DCN3 DML")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
linux-next kernel test robot reported the following problem:
warning: no previous prototype for 'dce60_get_dp_ref_freq_khz' [-Wmissing-prototypes]
[How]
mark dce60_get_dp_ref_freq_khz() as static
Fixes: 3ecb3b794e "drm/amd/display: dc/clk_mgr: add support for SI parts (v2)"
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. Fix scrolling of panel
2. Remove duplicated include
3. Use CPU when fail to get cmdq event
4. Add missing put_device() call
-----BEGIN PGP SIGNATURE-----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=dNjI
-----END PGP SIGNATURE-----
Merge tag 'mediatek-drm-fixes-5.9' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes
Mediatek DRM Fixes for Linux 5.9
1. Fix scrolling of panel
2. Remove duplicated include
3. Use CPU when fail to get cmdq event
4. Add missing put_device() call
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200916231724.30571-1-chunkuang.hu@kernel.org
drm/i915 fixes for v5.9-rc6:
- Avoid exposing a partially constructed context
- Use RCU instead of mutex for context termination list iteration
- Avoid data race reported by KCSAN
- Filter wake_flags passed to default_wake_function
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87y2l8vlj3.fsf@intel.com
Switch from magic numbers to defines for AV1 clockgating.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Addresses the following gcc warning with "make W=1":
In file included from drivers/gpu/drm/amd/amdgpu/../display/dmub/src/../dmub_srv.h:67:0,
from drivers/gpu/drm/amd/amdgpu/../display/dmub/src/dmub_dcn21.c:26:
drivers/gpu/drm/amd/amdgpu/../display/dmub/src/../inc/dmub_cmd.h: In function ‘dmub_rb_flush_pending’:
drivers/gpu/drm/amd/amdgpu/../display/dmub/src/../inc/dmub_cmd.h:795:12: warning: variable ‘temp’ set but not used
[-Wunused-but-set-variable]
uint64_t temp;
^
In file included from drivers/gpu/drm/amd/amdgpu/../display/dmub/src/../dmub_srv.h:67:0,
from drivers/gpu/drm/amd/amdgpu/../display/dmub/src/dmub_dcn30.c:26:
drivers/gpu/drm/amd/amdgpu/../display/dmub/src/../inc/dmub_cmd.h: In function ‘dmub_rb_flush_pending’:
drivers/gpu/drm/amd/amdgpu/../display/dmub/src/../inc/dmub_cmd.h:795:12: warning: variable ‘temp’ set but not used
[-Wunused-but-set-variable]
uint64_t temp;
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We never unmapped the regiser BAR on failure.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This register was requested for umr debugging support.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
"Copy GSL groups when committing a new context" patch was accidentally
removed during a refactor
Patch: 21ffcc94d5 ("drm/amd/display: Copy GSL groups when committing a new context")
[How]
Re add it
Fixes: b6e881c947 ("drm/amd/display: update navi to use new surface programming behaviour")
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DTM topology updates happens by default now. This results in DTM
warnings when hdcp is not even being enabled. This spams the dmesg
and doesn't effect normal display functionality so it is better to log it
using DRM_DEBUG_KMS()
[How]
Change the DRM_WARN() to DRM_DEBUG_KMS()
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not being able to create amdgpu sysfs attributes
is not a fatal error warranting not to continue
to try to bring up the display. Thus, if we get
an error trying to create amdgpu sysfs attrs,
report it and continue on to try to bring up
a display.
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Slava Abramov <slava.abramov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The firmware provided via MODULE_FIRMWARE appears in the
module information. External tools(eg. dracut) may use the
list of fw files to include them as appropriate in an initramfs,
thus missing declaration will lead to request firmware failure
in boot time.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tianci Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With IOMMU enabled, if SDPIF_MMIO_CNTRL_0 is not set
appropriately the system hangs without any trace
during S3.
To ease debug and to ensure that the failure, if any,
was caused by a race conditions that disabled write access to
SDPIF_MMIO_CNTRL_0 register, warn the user about it.
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the UMD stable Pstate settings with correct clocks.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SMU FCLK,SOCCLK have dependency on VCN CLKs. Lower VCN values so that
FCLK, SOCCLK reflect values set by UMD Stable Pstate.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since that should be the correct place to put ASIC specific
workarounds.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If dc reported by gpio is supported, the power source switching will
be performed by pmfw automatically. Thus the power source setting
workaround for Navi1x will be not needed.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Process any pending interrupt that occured before driver register
for interrupt from GPIO/SMU.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Which tells it's a normal pstate change or memory retraining.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Tested-by: Changfeng Zhu <Changfeng.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Which tells it's a normal pstate change or memory retraining.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Tested-by: Changfeng Zhu <Changfeng.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The convertion to "struct dm_pp_clock_range_for_mcif_wm_set_soc15"
is totally unnecessary and can be dropped.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Tested-by: Changfeng Zhu <Changfeng.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Raven never goes to swsmu path. So "adev->smu.ppt_funcs" will be
always false.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Tested-by: Changfeng Zhu <Changfeng.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Drop unneeded "ret".
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Either this was already performed in parent API. Or the table is
confirmed to exist.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As these operations are performed in hardware setup and there
is actually no race conditions during this period considering:
1. the hardware setup is serial and cannot be in parallel
2. all other operations can be performed only after hardware
setup complete.
V2: rich the commit log description
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As these operations are performed in hardware setup and there
is actually no race conditions during this period considering:
1. the hardware setup is serial and cannot be in parallel
2. all other operations can be performed only after hardware
setup complete.
V2: rich the commit log description
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
And to fit more accurately what the cod does.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The workaround can be applied only with UCLK DPM enabled.
And expand the workaround to more Navi10 SKUs and also
Navi14.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
And different workaround will be applied based on hybrid cdr bit.
V2: add pmfw version guard to make sure the new workaround applied only
with pmfw >= 42.53.0
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
By uploading dummy pstate tables.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This dummy reading buffer will be used for the new Navi1x
UMC CDR workaround.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Drop the unused message(SMU_MSG_DAL_DISABLE_DUMMY_PSTATE_CHANGE).
And do not apply this workaround when the max uclk frequency
is greater than 750Mhz.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
That's where the uclk dpm get enabled and then the
uclk cdr workaround can be applied.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is needed for Navi1X only. And it may help for display missing
or hang issue seen on some high resolution monitors.
V2: no UCLK DPM enablement for Navi10 A0 secure SKU
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So that ASIC specific actions can be added.
V2: better namings
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This moves the generic tracking into the drivers and protects
against reentrancy in the drivers. It fixes up radeon and agp
to be able to query the bound status as that is required.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200917043040.146575-2-airlied@gmail.com
PASID is defined as a few different types in iommu including "int",
"u32", and "unsigned int". To be consistent and to match with uapi
definitions, define PASID and its variations (e.g. max PASID) as "u32".
"u32" is also shorter and a little more explicit than "unsigned int".
No PASID type change in uapi although it defines PASID as __u64 in
some places.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Link: https://lkml.kernel.org/r/1600187413-163670-2-git-send-email-fenghua.yu@intel.com
Since we now have proper old and new cdclk state we no longer
need to keep this flag to indicate that the force min cdclk has
changed. Instead just check if the old vs. new value are different.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200714152626.380-4-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
The new field 'dma_range_map' in struct device is used to facilitate the
use of single or multiple offsets between mapping regions of cpu addrs and
dma addrs. It subsumes the role of "dev->dma_pfn_offset" which was only
capable of holding a single uniform offset and had no region bounds
checking.
The function of_dma_get_range() has been modified so that it takes a single
argument -- the device node -- and returns a map, NULL, or an error code.
The map is an array that holds the information regarding the DMA regions.
Each range entry contains the address offset, the cpu_start address, the
dma_start address, and the size of the region.
of_dma_configure() is the typical manner to set range offsets but there are
a number of ad hoc assignments to "dev->dma_pfn_offset" in the kernel
driver code. These cases now invoke the function
dma_direct_set_offset(dev, cpu_addr, dma_addr, size).
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
[hch: various interface cleanups]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
For platforms that can't do native 4:2:0 outout we may still be
able to do it by getting the DP->HDMI protocol converter to
perform the 4:4:4->4:2:0 downsamling for us. In this case we
have to configure our hardware to output YCbCr 4:4:4, which we've
already hooked up so all we need to do is flip the switch.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-19-ville.syrjala@linux.intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Account for the TMDS clock limits declared by the DFP
when determining what color depth we're going to use.
v2: Drop the reference to DP++ dongle since it's not handled here
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-17-ville.syrjala@linux.intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Pull the "do we want to enable audio?" computation into a small helper
to make intel_hdmi_compute_config() less messy. Will make it easier to
add more checks for this later (eg. we should actually be checking
at the hblank is long enough for audio transmission).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-16-ville.syrjala@linux.intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The downstream facing port caps in the DPCD can give us a hint
as to what kind of display mode the sink can use if it doesn't
have an EDID. Use that information to pick a suitable mode.
v2: Use Returns: for kdoc (Lyude)
Add kdocs for drm_display_mode_from_cea_vic() (Lyude)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-14-ville.syrjala@linux.intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
DP 1.3 adds some extra control knobs for DP->HDMI protocol conversion.
Let's use that to configure the "HDMI mode" (ie. infoframes vs. not)
based on the capabilities of the sink.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-13-ville.syrjala@linux.intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Use the new helpers to extract the TMDS clock limits from
the downstream facing port and check them in .mode_valid().
TODO: we should check these in .compute_config() too to eg.
determine if we can do deep color on the HDMI side or not
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-12-ville.syrjala@linux.intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Move the downstream facing port dotclock check into a new function
(intel_dp_mode_valid_downstream()) so that we have a nice future
place where we can collect other related checks.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-10-ville.syrjala@linux.intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We want to differentiate between the DFP dotclock and TMDS clock
limits. Let's convert the current thing to just give us the
dotclock limit.
v2: Use Returns: for kdoc (Lyude)
Fix up nouveau code too
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-9-ville.syrjala@linux.intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Deal with more cases in drm_dp_downstream_max_bpc():
- DPCD 1.0 -> assume 8bpc for non-DP
- DPCD 1.1+ DP (or DP++ with DP sink) -> allow anything
- DPCD 1.1+ TMDS -> check the caps, assume 8bpc if the value is crap
- anything else -> assume 8bpc
v2: Use Returns: for kdoc (Lyude)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-8-ville.syrjala@linux.intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Stash the downstream facing port max bpc away during
intel_dp_set_edid(). We'll soon need the EDID in there so
we can't figure this out so easily during .compute_config() anymore.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-6-ville.syrjala@linux.intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Non-HDMI sinks shouldn't be sent infoframes. Check for that when
using LSPCON.
FIXME: How do we turn off infoframes once enabled? Do we even
have to?
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-3-ville.syrjala@linux.intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This code should use "vma[1]" instead of "vma". The "vma" variable is a
valid pointer.
Fixes: 6b05030496 ("drm/i915: Convert i915_gem_object/client_blt.c to use ww locking as well, v2.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200911075243.GG12635@kadam
Currently Tegra DRM driver manually manages display panel, but this
management could be moved out into DRM core if we'll wrap panel into
DRM bridge. This patch wraps RGB panel into a DRM bridge and removes
manual handling of the panel from the RGB output code.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Newer Tegra device-trees will specify a video output graph, which involves
LVDS encoder bridge. This patch adds support for the LVDS encoder bridge
to the RGB output, allowing us to model the display hardware properly.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Newer Tegra device-trees will specify a video output graph which involves
a bridge. This patch adds initial support for the DRM bridges to the Tegra
DRM output.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The OF node should be put before returning error in tegra_output_probe(),
otherwise node's refcount will be leaked.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use the of_get_i2c_adapter_by_node(), which is similar to the existing
call to of_find_i2c_adapter_by_node() except that it also takes a
reference to the owner module of the I2C adapter. In order to properly
balance this out, call i2c_put_adapter() to release the reference to the
I2C adapter and its owner module.
For the special case where the DDC comes from the DPAUX, care must be
taken to perform the same steps (i.e. get_device() and module_get()) so
that the reference counts are all balanced.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Unexport ttm_check_under_lowerlimit.
Make ttm_bo_acc_size static and unexport it.
Remove ttm_get_kernel_zone_memory_size.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/390515/
Please pull a set of fixes for various DRM drivers that finally resolve
incorrect usage of the scatterlists (struct sg_table nents and orig_nents
entries), what causes issues when IOMMU is used.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200910080505.24456-1-m.szyprowski@samsung.com
[Why]
DTM topology updates happens by default now. This results in DTM
warnings when hdcp is not even being enabled. This spams the dmesg
and doesn't effect normal display functionality so it is better to log it
using DRM_DEBUG_KMS()
[How]
Change the DRM_WARN() to DRM_DEBUG_KMS()
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The firmware provided via MODULE_FIRMWARE appears in the
module information. External tools(eg. dracut) may use the
list of fw files to include them as appropriate in an initramfs,
thus missing declaration will lead to request firmware failure
in boot time.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tianci Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
if of_find_device_by_node() succeed, mtk_drm_kms_init() doesn't have
a corresponding put_device(). Thus add jump target to fix the exception
handling for this function implementation.
Fixes: 8f83f26891 ("drm/mediatek: Add HDMI support")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
if of_find_device_by_node() succeed, mtk_drm_kms_init() doesn't have
a corresponding put_device(). Thus add jump target to fix the exception
handling for this function implementation.
Fixes: 119f517362 ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
mtk_ddp_comp_init() is called in a loop in mtk_drm_probe(), if it
fail, previous successive init component is not proccessed.
Thus uninitialize valid component and put their device if component
init failed.
Fixes: 119f517362 ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
if of_find_device_by_node() succeed, mtk_ddp_comp_init() doesn't have
a corresponding put_device(). Thus add put_device() to fix the exception
handling for this function implementation.
Fixes: d0afe37f52 ("drm/mediatek: support CMDQ interface in ddp component")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Even though cmdq client is created successfully, without the cmdq event,
cmdq could not work correctly, so use CPU when fail to get cmdq event.
Fixes: 60fa8c13ab ("drm/mediatek: Move gce event property to mutex device node")
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Remove mtk_drm_ddp.h which is included more than once
Fixes: 9aef5867c8 ("drm/mediatek: drop use of drmP.h")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Since we store a pointer to the fake iommu device that is allocated on
the stack, as soon as we leave the function it goes out of scope and any
future dereference is undefined behaviour. Just in case we may need to
look at the fake iommu device after initialiation, move the allocation
from the stack into the data.
Fixes: 01b9d4e211 ("iommu/vt-d: Use dev_iommu_priv_get/set()")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200916105022.28316-2-chris@chris-wilson.co.uk
Just in case the caller passes in 0 for both slow&fast timeouts, make
sure we initialise the stack value returned. Add an assert so that we
don't make the mistake of passing 0 timeouts for the wait.
drivers/gpu/drm/i915/intel_uncore.c:2011 __intel_wait_for_register_fw() error: uninitialized symbol 'reg_value'.
References: 3f649ab728 ("treewide: Remove uninitialized_var() usage")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200916105022.28316-1-chris@chris-wilson.co.uk
This change simplifies ast's modesetting code. The display mode
is now programmed from within the CRTC's atomic_enable(), which
only runs if we actually want to program the mode.
Corresponding code in atomic_flush() is being removed. Also removed
is atomic_begin(), which serves no purpose at all.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200914072236.19398-4-tzimmermann@suse.de
The ast HW cursor requires the primary plane and CRTC to display at
a valid mode and format. This is not the case while switching
display modes, which can lead to the screen turing permanently dark.
As a workaround, the ast driver now disables active planes while the
mode or format switch takes place. It also synchronizes with the vertical
refresh to give CRTC and planes some time to catch up on each other.
The active planes planes (primary or cursor) will be re-enabled by
each plane's atomic_update() function.
v3:
* move the logic into the CRTC's atomic_disable function
v2:
* move the logic into the commit-tail function
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200914072236.19398-3-tzimmermann@suse.de
The atomic modesetting code tried to distinguish format changes from
full modesetting operations. But the implementation was buggy and the
format registers were often updated even for simple pageflips.
Fix this problem by handling format changes in the primary plane's
update function.
v3:
* program format in primary plane's update function
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200914072236.19398-2-tzimmermann@suse.de
The lcdif IP does not support a framebuffer pitch (stride) other than
framebuffer width. Check for equality and reject the framebuffer
otherwise.
This prevents a distorted picture when using 640x800 and running the
Mesa graphics stack. Mesa tries to use a cache aligned stride, which
leads at that particular resolution to width != stride. Currently
Mesa has no fallback behavior, but rejecting this configuration allows
userspace to handle the issue correctly.
Fixes: 45d59d7040 ("drm: Add new driver for MXSFB controller")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200908141654.266836-1-stefan@agner.ch
Handing the return value of drm_universal_plane_init to fix the following
W=1 kernel build warning(s):
vc4_plane.c: In function ‘vc4_plane_init’:
vc4_plane.c:1340:6: warning: variable ‘ret’ set but not
used [-Wunused-but-set-variable]
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1599811777-34093-1-git-send-email-tiantao6@hisilicon.com
(NOTE: This is the minimal backportable fix, a full fix is being
developed at https://patchwork.freedesktop.org/patch/388048/)
The flags passed to the wait_entry.func are passed onwards to
try_to_wake_up(), which has a very particular interpretation for its
wake_flags. In particular, beyond the published WF_SYNC, it has a few
internal flags as well. Since we passed the fence->error down the chain
via the flags argument, these ended up in the default_wake_function
confusing the kernel/sched.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2110
Fixes: ef46884975 ("drm/i915: Propagate fence errors")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: <stable@vger.kernel.org> # v5.4+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200728152144.1100-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Joonas: Rebased and reordered into drm-intel-gt-next branch]
[Joonas: Added a note and link about more complete fix]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit f4b3c39554)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
To implement preempt-to-busy (and so efficient timeslicing and best utilization
of the hardware submission ports) we let the GPU run asynchronously in respect
to the ELSP submission queue. This created challenges in keeping and accessing
the driver state mirroring the asynchronous GPU execution.
The latest occurence of this was spotted by KCSAN:
[ 1413.563200] BUG: KCSAN: data-race in __await_execution+0x217/0x370 [i915]
[ 1413.563221]
[ 1413.563236] race at unknown origin, with read to 0xffff88885bb6c478 of 8 bytes by task 9654 on cpu 1:
[ 1413.563548] __await_execution+0x217/0x370 [i915]
[ 1413.563891] i915_request_await_dma_fence+0x4eb/0x6a0 [i915]
[ 1413.564235] i915_request_await_object+0x421/0x490 [i915]
[ 1413.564577] i915_gem_do_execbuffer+0x29b7/0x3c40 [i915]
[ 1413.564967] i915_gem_execbuffer2_ioctl+0x22f/0x5c0 [i915]
[ 1413.564998] drm_ioctl_kernel+0x156/0x1b0
[ 1413.565022] drm_ioctl+0x2ff/0x480
[ 1413.565046] __x64_sys_ioctl+0x87/0xd0
[ 1413.565069] do_syscall_64+0x4d/0x80
[ 1413.565094] entry_SYSCALL_64_after_hwframe+0x44/0xa9
To complicate matters, we have to both avoid the read tearing of *active and
avoid any write tearing as perform the pending[] -> inflight[] promotion of the
execlists.
This is because we cannot rely on the memcpy doing u64 aligned copies on all
kernels/platforms and so we opt to open-code it with explicit WRITE_ONCE
annotations to satisfy KCSAN.
v2: When in doubt, write the same comment again.
v3: Expanded commit message.
Fixes: b55230e5e8 ("drm/i915: Check for awaits on still currently executing requests")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716142207.13003-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Joonas: Rebased and reordered into drm-intel-gt-next branch]
[Joonas: Added expanded commit message from Tvrtko and Chris]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit b4d9145b01)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
As we now protect the timeline list using RCU, we can drop the
timeline->mutex for guarding the list iteration during context close, as
we are searching for an inflight request. Any new request will see the
context is banned and not be submitted. In doing so, pull the checks for
a concurrent submission of the request (notably the
i915_request_completed()) under the engine spinlock, to fully serialise
with __i915_request_submit()). That is in the case of preempt-to-busy
where the request may be completed during the __i915_request_submit(),
we need to be careful that we sample the request status after
serialising so that we don't miss the request the engine is actually
submitting.
Fixes: 4a31741521 ("drm/i915/gem: Refine occupancy test in kill_context()")
References: d22d2d073e ("drm/i915: Protect i915_request_await_start from early waits") # rcu protection of timeline->requests
References: https://gitlab.freedesktop.org/drm/intel/-/issues/1622
References: https://gitlab.freedesktop.org/drm/intel/-/issues/2158
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200806105954.7766-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit 736e785f9b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Avoid exposing a partially constructed context by deferring the
list_add() from the initial construction to the end of registration.
Otherwise, if we peek into the list of contexts from inside debugfs, we
may see the partially constructed context and chase down some dangling
incomplete pointers.
Reported-by: CQ Tang <cq.tang@intel.com>
Fixes: 3aa9945a52 ("drm/i915: Separate GEM context construction and registration to userspace")
References: f6e8aa3871 ("drm/i915: Report the number of closed vma held by each context in debugfs")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: CQ Tang <cq.tang@intel.com>
Cc: <stable@vger.kernel.org> # v5.2+
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730092856.23615-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit eb4dedae92)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Move bound up into the bo object, and keep populated with the tt
object.
The ghost object handling needs to follow the flags at the bo
level now instead of it being part of the ttm tt object.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200915024007.67163-7-airlied@gmail.com
This adds 2 getters and 4 setters, however unbound and populated
are currently the same thing, this will change, it also drops
a BUG_ON that seems not that useful.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200915024007.67163-2-airlied@gmail.com
We currenty check for platform at multiple parts in the driver
to grab the correct PLL. Let us begin to centralize it through a
helper function.
v2: s/intel_get_pll_enable_reg()/intel_combo_pll_enable_reg() (Ville)
v3: Clean up combo_pll_disable() (Rodrigo)
v4: s/dev_priv/i915 (Jani)
Move static and return type to the same line( Ville, Jani)
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200914175703.15024-1-anusha.srivatsa@intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Don't check drm_crtc_state::active for this either, per its
documentation in include/drm/drm_crtc.h:
* Hence drivers must not consult @active in their various
* &drm_mode_config_funcs.atomic_check callback to reject an atomic
* commit.
atomic_remove_fb disables the CRTC as needed for disabling the primary
plane.
This prevents at least the following problems if the primary plane gets
disabled (e.g. due to destroying the FB assigned to the primary plane,
as happens e.g. with mutter in Wayland mode):
* The legacy cursor ioctl returned EINVAL for a non-0 cursor FB ID
(which enables the cursor plane).
* If the cursor plane was enabled, changing the legacy DPMS property
value from off to on returned EINVAL.
v2:
* Minor changes to code comment and commit log, per review feedback.
GitLab: https://gitlab.gnome.org/GNOME/mutter/-/issues/1108
GitLab: https://gitlab.gnome.org/GNOME/mutter/-/issues/1165
GitLab: https://gitlab.gnome.org/GNOME/mutter/-/issues/1344
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Turns out this breaks a lot of different hardware.
This reverts commit fc8c70526b.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Create sysfs interface also for sienna_cichlid.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Recent characterization shows increased stutter latencies on some SKUs,
leading to underflow.
[how]
Update SOC params to account for this worst case latency.
Signed-off-by: Jun Lei <jun.lei@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Previously we were only calling add_topology when hdcp was being enabled.
Now we call add_topology by default so the ERROR messages are printed if
the firmware is not loaded.
This error message is not relevant for normal display functionality so
no need to print a ERROR message.
[How]
Change DRM_ERROR to DRM_INFO
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This avoids smu issue when enabling runtime pptable update for
sienna_cichlid and so on. Runtime pptable udpate is needed for test
and debug purpose.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the resume stage of GPU recovery, start_cpsch will call pm_init
which set pm->allocated as false, cause the next pm_release_ib has
no chance to release ib memory.
Add pm_release_ib in stop_cpsch which will be called in the suspend
stage of GPU recovery.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Don't check drm_crtc_state::active for this either, per its
documentation in include/drm/drm_crtc.h:
* Hence drivers must not consult @active in their various
* &drm_mode_config_funcs.atomic_check callback to reject an atomic
* commit.
atomic_remove_fb disables the CRTC as needed for disabling the primary
plane.
This prevents at least the following problems if the primary plane gets
disabled (e.g. due to destroying the FB assigned to the primary plane,
as happens e.g. with mutter in Wayland mode):
* The legacy cursor ioctl returned EINVAL for a non-0 cursor FB ID
(which enables the cursor plane).
* If the cursor plane was enabled, changing the legacy DPMS property
value from off to on returned EINVAL.
v2:
* Minor changes to code comment and commit log, per review feedback.
GitLab: https://gitlab.gnome.org/GNOME/mutter/-/issues/1108
GitLab: https://gitlab.gnome.org/GNOME/mutter/-/issues/1165
GitLab: https://gitlab.gnome.org/GNOME/mutter/-/issues/1344
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Due to hardware bugs, scatter/gather display on raven requires
a 1:1 IOMMU mapping, however, SME (System Memory Encryption)
requires an indirect IOMMU mapping because the encryption bit
is beyond the DMA mask of the chip. As such, the two are
incompatible.
Acked-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If parse_write_buffer_into_params() fails, we should free
wr_buf before return.
Fixes: 6f77b2ac62 ("drm/amd/display: Add connector HPD trigger debugfs entry")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In fnction is_cr_done & is_ch_eq_done, when done = false
happened once, no need to circle left ln_count.
This change is to make the code run a bit fast.
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes coccicheck warning:
drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c:1003:4-9: WARNING: Comparison to bool
drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c:1083:5-11: WARNING: Comparison to bool
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes coccicheck warning:
drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c:619:15-49: WARNING: Comparison to bool
drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c:629:15-49: WARNING: Comparison to bool
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes coccicheck warning:
drivers/gpu/drm/amd/amdgpu/uvd_v6_0.c:1243:14-25: WARNING: Comparison to bool
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes coccicheck warning:
drivers/gpu/drm/amd/amdgpu/si.c:1342:5-10: WARNING: Comparison to bool
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes coccicheck warning:
drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c:562:5-11: WARNING: Comparison to bool
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes coccicheck warning:
drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c:619:5-11: WARNING: Comparison to bool
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes coccicheck warning:
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:3563:5-31: WARNING: Comparison to bool
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes coccicheck warning:
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:2805:5-11: WARNING: Comparison to bool
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds support for reporting sclk values for Radeon GPUs, where supported.
Signed-off-by: Sandeep Raghuraman <sandy.8925@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix kernel-doc warnings.
drivers/gpu/drm/scheduler/sched_fence.c:110: warning: Function parameter or
member 'f' not described in 'drm_sched_fence_release_scheduled'
drivers/gpu/drm/scheduler/sched_fence.c:110: warning: Excess function
parameter 'fence' description in 'drm_sched_fence_release_scheduled'
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix spellos of "function" in drivers/gpu/drm/amd/display/.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove duplicate header which is included twice.
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Disabling perf events does not specify reset in ABI so stop doing it in
hardware.
Signed-off-by: Jonathan Kim <Jonathan.Kim@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Turns out this breaks a lot of different hardware.
This reverts commit fc8c70526b.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add more accurate description of the pe parameter of function
amdgpu_vm_sdma_udpate and amdgpu_vm_cpu_update
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Christian Konig <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add comments to refect what function does
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Christian Konig <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Create sysfs interface also for sienna_cichlid.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Seamless boot skip porgram clock when set path mode.
It cause driverprogram clock after unblank stream.
[How]
update clock when non-seamless boot stream exist
Signed-off-by: Lewis Huang <Lewis.Huang@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Some SOC BB paramters may vary per SKU, and it does
not make sense for driver to hardcode these values
[how]
Parse the values from VBIOS if available, and use
them if valid
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
psr doesn't get fully disabled before hitting hubbub1_wm_change_req_wa.
[How]
Pass TRUE to "wait" parameter to get psr fully disabled.
Follow-Up fix to:
dc: PSR eDP p-state warning occurs intermittently after unplug DP
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Recent characterization shows increased stutter latencies on some SKUs,
leading to underflow.
[how]
Update SOC params to account for this worst case latency.
Signed-off-by: Jun Lei <jun.lei@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
gcc version 5.4.0 fails compilation with:
‘PixelPTEReqHeightPTEs’ may be used uninitialized in this function
[-Werror=maybe-uninitialized]
[How]
Initialized variable explicitly with 0
Signed-off-by: Roman Li <roman.li@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The ctx field of dc_transfer_func is not always populated and therefore
isn't reliable.
[How]
Remove dc context from dc_transfer_func
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
We want to trigger atomic check on connector, which DSC debugfs
properties have changed.
[how]
Add a helper function that iterates through all active connectors
and add them to the state if DSC debugfs parameters have changed.
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
When comparing current DSC timing settings with enforced through
debugfs we have to calculate number of both vertical and horisontal
slices. So instead of doing that every time we should just
use number of slices rather than setting its dimensions.
[how]
In connector's dsc preferred settings structure change slice height
and slice width parameters to number of slices vertical and horisontal.
Also calculate number of slices in debugfs rather in create_stream_for_sink.
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
Previously we were returning the number of bytes allocated
for a write buffer from debugfs and when manually used it wouldn't
rise any errors, but it wouldn't match the size of the parameters
passed from userspace.
In successful case return the size passed by usermode otherwise
the error code is returned. That simplifies the parser helper
and removes a potential error of returning mismatched input size.
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[How]
- use dc interface instead of hwss interface in cursor functions, to keep
dc->idle_optimizations_allowed updated
- add dc interface to check if idle optimizations might apply to a plane
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Send stream active state info to DMUB
[How]
Implement GPINT to notify stream mask
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| [Header Changes]
| - Add debug flag to log line numbers for PSR debug
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
why:
some functions may need be dependent on stutter period in the future
how:
Extract from stutter calculations and place into perf_params structure
Signed-off-by: Martin Leung <martin.leung@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
We need a virtual tool that would emulate a physical
connector unplug to usermode, while connector is
still physically plugged in.
[how]
Added a new option to debugfs entry "trigger_hotplug".
It emulates hotplug irq handling scenario by clearing
DC and DM connector states.
It can be triggered with the following command:
echo 0 > /sys/kernel/debug/dri/0/DP-X/trigger_hotplug
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
For debug purposes we want not to enable DSC on certain connectors
even if algorithm deesires to do so, instead it should enable DSC
on other capable connectors or fail the atomic check.
[how]
Adding the third option to connector's debugfs entry dsc_clock_en.
Accepted inputs:
0x0 - connector is using default DSC enablement policy
0x1 - force enable DSC on the connector, if it supports DSC
0x2 - force disable DSC on the connector, if DSC is supported
Ex. # echo 0x2 > /sys/kernel/debug/dri/0/DP-1/dsc_clock_en
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows us to reuse these on different asics.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCValidator is created/destroyed repeatedly for cofunctional validation
which causes a lot of memory thrashing, particularly when Driver Verifer
is enabled.
[How]
Implement a basic caching algorithm that will cache DCValidator with a
matching topology. When a match is found, the DCValidator can be
reused. If there is no match, a new one will be created and inserted
into the cache if there is space or an unreference entry can be evicted.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Idle optimization and PSR conflict each other. If both enabled
at the same time, display flickering will be observed.
[How]
Disable idle optimization when PSR is enabled.
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Previously we were only calling add_topology when hdcp was being enabled.
Now we call add_topology by default so the ERROR messages are printed if
the firmware is not loaded.
This error message is not relevant for normal display functionality so
no need to print a ERROR message.
[How]
Change DRM_ERROR to DRM_INFO
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There are situations where we go from 2 pipe to 1 pipe in MPO, but this
isn't a pipe split being lost -- it's a plane disappearing in (i.e. video overlay
goes away) so we lose one pipe. In these situations we don't want to
disable the pipe in a separate operation from the rest of the pipe
programming sequence. We only want to disable a pipe in a
separate operation when we're actually disabling pipe split.
[How]
Make sure the pipe being lost has the same stream AND plane
as the old top pipe to ensure.
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
PSR needs to be enabled on DCN30. This is the driver part of PSR
enablement.
Also disabled retired DMCU on driver side, since DMCU is
not supported on DCN30 anymore.
[How]
Add necessary changes to enable PSR on DCN30.
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
ABM feature initialization was not executed due to early return.
dm_late_init() had an early return in case if DMCU is not used.
With the implementation of ABM on DMUB, DMCU can be disabled
but ABM still needs to be initialized.
[How]
Remove verification for DMCU from the top of the function.
The existing logic will handle the case when DMCU is not used.
Signed-off-by: Roman Li <roman.li@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The function set_mst_bandwidth is poorly name since it isn't clear what
it does, and it also does not reflect any part of the allocation sequence
described in the DP spec.
[How]
Rename the function set_mst_bandwidth to set_throttled_vcp_size.
Signed-off-by: George Shen <george.shen@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When pipe locks are being taken we wait for flip pending to clear first.
In some cases the pipe mapping is changed and the pending we're checking
for will never clear.
[How]
Don't check disabled pipes for flip pending.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
When link training failures occur for eDP, dp_disable_link_phy
is called which powers OFF eDP panel. After link training retry
delay, the next retry begins by calling dp_enable_link_phy
which does not issue a correspnding eDP panel power ON, leaving
panel powered OFF which leads to display OFF/dark.
[how]
Power ON eDP before next link training retry.
Signed-off-by: Ashley Thomas <Ashley.Thomas2@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Currently clearing the wrong bit for CP_IRQ, and logic on when to
clear needs to be fixed.
[How]
Corrected bit to clear and improved logic for decision to clear.
Signed-off-by: Harmanprit Tatla <harmanprit.tatla@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Only the first pipe in ODM combine group should have nonzero recout
offset. All other pipes should have recout offset 0;
otherwise there will be gaps in the image.
[HOW]
Set recout.x to 0 if the pipe is not the leftmost ODM pipe.
When computing viewports, calculate the horizontal offset of a pipe's src
based on the current pipe's position in the ODM group, plus whatever offset the
leftmost ODM pipe has; otherwise there will be discontinuity in the image.
Since ODM combine can only combine pipes horizontally, nothing needs to
be done for recout.y.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
The cr training aux rd interval is
modified without following specs requirements.
According to the commit message the change was not intended to modify the value.
Therefore it looks like it is caused by a typo in the change.
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During the load processes for Renoir, our display code needs to retrieve
the SMU clock and voltage table, however, this operation can fail which
means that we have to check this scenario. Currently, we are not
handling this case properly and as a result, we have seen the following
dmesg log during the boot:
RIP: 0010:rn_clk_mgr_construct+0x129/0x3d0 [amdgpu]
...
Call Trace:
dc_clk_mgr_create+0x16a/0x1b0 [amdgpu]
dc_create+0x231/0x760 [amdgpu]
This commit fixes this issue by checking the return status retrieved
from the clock table before try to populate any bandwidth.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This assert triggers a false negative because there are more than 4 MPCCs
on many asics.
[How]
- change assert comparisson
- remove unused variable
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Currently we do not clear the CP_IRQ bit upon receiving it.
[How]
Added a function to clear CP_IRQ bit.
Signed-off-by: Harmanprit Tatla <harmanprit.tatla@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If plane has changed, dcn20_detect_pipe_changes doesn't update dc_plane_state->update_flags, and the following dcn20_program_pipe can't reprogram hubp correctly.
[How]
Add a new flags bit "plane_changed" in pipe_ctx->update_flags.If old plane isn’t identical to new plane, this bit will be set and guide “dcn20_program_pipe” to programing HUBP correctly.
Signed-off-by: JinZe.Xu <JinZe.Xu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Changing to smaller modes on OLED panel caused a blue screen crash
as driver reported dram change during vactive when it shouldn't
[how]
Added an extra condition to prevent incorrect dram change timing
Signed-off-by: Naveed Ashfaq <Naveed.Ashfaq@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This avoids smu issue when enabling runtime pptable update for
sienna_cichlid and so on. Runtime pptable udpate is needed for test
and debug purpose.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
use bool directly
Signed-off-by: Flora Cui <flora.cui@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SDMA utilization calculations are enabled/disabled by
writing to SDMAx_PUB_DUMMY_REG2 register. Currently,
enable this only for Arcturus.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Since there is no need for accessing crtc state in the interrupt
handler, interrupts need not be disabled well in advance, and
can be moved to commit_tail where it should be.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Currently commit_tail holds global locks and wait for dependencies which is
against the DRM API contracts. Inorder to fix this, IRQ handler should be able
to run without having to access crtc state. Required parameters are copied over
so that they can be directly accessed from the interrupt handler
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
To refactor DM IRQ management, all fields used by IRQ is best moved
to a separate struct so that main amdgpu_crtc struct need not be changed
Location of the new struct shall be in DM
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If KFD_SUPPORT_IOMMU_V2 is not set, gcc warns:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_device.c:121:37: warning: ‘raven_device_info’ defined but not used [-Wunused-const-variable=]
static const struct kfd_device_info raven_device_info = {
^~~~~~~~~~~~~~~~~
As Huang Rui suggested, Raven already has the fallback path,
so it should be out of IOMMU v2 flag.
Suggested-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It needs to add ta DTM/HDCP print to get HDCP/DTM version info when cat
amdgpu_firmware_info
Signed-off-by: Changfeng <Changfeng.Zhu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's in accordance with pmfw 65.8.0 for navy_flounder.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
XGMI support is more complicated than single device support as
questions of synchronization between the device recovering from
PCI error and other members of the hive are required.
Leaving this for next round.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cache the PCI state on boot and before each case where we might
loose it.
v2: Add pci_restore_state while caching the PCI state to avoid
breaking PCI core logic for stuff like suspend/resume.
v3: Extract pci_restore_state from amdgpu_device_cache_pci_state
to avoid superflous restores during GPU resets and suspend/resumes.
v4: Style fixes.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wait for HW/PSP initiated ASIC reset to complete before
starting the recovery operations.
v2: Remove typo
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DPC recovery involves ASIC reset just as normal GPU recovery so block
SW GPU schedulers and wait on all concurrent GPU resets.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
At this point the ASIC is already post reset by the HW/PSP
so the HW not in proper state to be configured for suspension,
some blocks might be even gated and so best is to avoid touching it.
v2: Rename in_dpc to more meaningful name
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In function flr_work, we should do gpu recovery when no job
is running. Fix the logic by inverting it.
v2: modify the description
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Liu ChengZhe <ChengZhe.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the resume stage of GPU recovery, start_cpsch will call pm_init
which set pm->allocated as false, cause the next pm_release_ib has
no chance to release ib memory.
Add pm_release_ib in stop_cpsch which will be called in the suspend
stage of GPU recovery.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The LVDS encoders on RZ/G1H SoC is identical to the R-Car Gen2 family. Add
support for RZ/G1H (R8A7742) SoC to the LVDS encoder driver.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Add direct support for the r8a7742 (RZ/G1H).
The RZ/G1H shares a common, compatible configuration with the r8a7790
(R-Car H2) so that device info structure is reused, the only difference
being TCON is unsupported on RZ/G1H (Currently unsupported by the driver).
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
There is no need to select DRM_RCAR_WRITEBACK if DRM_RCAR_DU=n which
just make the generated .config a bit ugly.
# ARM devices
#
# end of ARM devices
CONFIG_DRM_RCAR_WRITEBACK=y
#
# Frame buffer Devices
Let DRM_RCAR_WRITEBACK depend on DRM_RCAR_DU instead.
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Make the necessary changes to the DP driver to use the qmp phy from the
common phy framework instead of rolling our own in the drm subsystem.
This also removes the PLL code and adds proper includes so things build.
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Cc: Chandan Uddaraju <chandanu@codeaurora.org>
Cc: Vara Reddy <varar@codeaurora.org>
Cc: Tanmay Shah <tanmay@codeaurora.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Manu Gautam <mgautam@codeaurora.org>
Cc: Sandeep Maheswaram <sanm@codeaurora.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Jonathan Marek <jonathan@marek.ca>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Rob Clark <robdclark@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
No need to fix the number of resolutions to one during the video
pattern CTS test. The userspace test client will handle both
the hotplug as well as picking the right resolution for the test.
Changes in v2: rebase on top of latest patchset of dependency
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add the debugfs nodes needed for the video pattern
compliance tests to MSM DP driver.
Changes in v2: rebase on top of latest patchset of dependency
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Move the MSM DP debugfs node from /sys/kernel/debug/drm_dp
to /sys/kernel/debug/dri/*/ as required for video pattern
compliance test suite.
Changes in v2: rebase on top of latest patchset of dependency
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
To prepare the MSM DP driver for running video pattern
compliance tests introduce debugfs module for it.
Changes in v2: rebase on top of latest patchset of dependency
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
In the current implementation, there is a very small window for
the audio side to safely signal the hdmi_code_shutdown() before
the clocks are disabled.
Add some synchronization between the DP display and DP audio module
to safely disable the clocks to avoid unclocked access from audio
side.
In addition, audio side can open the sound card even if DP monitor
is not connected. Avoid programming hardware registers in this case
and bail out early.
Changes in v4:
- removed some leftover prints
Changes in v5:
- fix crash when user tries to play audio in suspended
state
Changes in v6:
- rebased on top of latest patchset of dependency
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signal the hotplug disconnect event to the audio side in the
event handler so that they are notified earlier and have more
time to process the disconnect event.
Changes in v2: none
Changes in v3: none
Changes in v4: rebase on top of latest patchset of dependency
Changes in v5: rebase on top of latest patchset of dependency
Changes in v6: none
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add the hook_plugged_cb op for the MSM DP driver to signal connect
and disconnect events to the hdmi-codec driver which in-turn shall
notify the audio subsystem to start a new or teardown an existing
session.
Changes in v2: none
Changes in v3: none
Changes in v4: rebase on top of latest patchset of dependency
Changes in v5: rebase on top of latest patchset of dependency
Changes in v6: none
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Introduce audio support for Display Port on MSM chipsets.
This change integrates DP audio sub-module with the main
Display Port platform driver.
In addition, this change leverages hdmi_codec_ops to expose
the operations to the audio driver.
Changes in v2: fix up a compilation issue on drm-next branch
Changes in v3: none
Changes in v4: none
Changes in v5: none
Changes in v6: rebase on top of latest patchset of dependency
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Store the dp_display in the platform driver data instead of the
dp_display_private.
This is required to allow other sub-modules to reuse the platform
driver data.
Changes in v3: none
Changes in v4: none
Changes in v5: none
Changes in v6: rebase on top of latest patchset of dependency
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
add event thread to execute events serially from event queue. Also
timeout mode is supported which allow an event be deferred to be
executed at later time. Both link and phy compliant tests had been
done successfully.
Changes in v2:
-- Fix potential deadlock by removing redundant connect_mutex
-- Check and enable link clock during modeset
-- Drop unused code and fix function prototypes.
-- set sink power to normal operation state (D0) before DPCD read
Changes in v3:
-- push idle pattern at main link before timing generator off
-- add timeout handles for both connect and disconnect
Changes in v4:
-- add ST_SUSPEND_PENDING to handles suspend/modeset test operations
-- clear dp phy aux interrupt status when ERR_DPPHY_AUX error
-- send segment addr during edid read
-- clear bpp depth before MISC register write
Changes in v5:
-- add ST_SUSPENDED to fix crash at resume
Changes in v6:
-- at msm_dp_display_enable() do not return until resume_done to avoid
kms commit timeout
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Configure HPD registers in DP controller and
enable HPD interrupt.
Add interrupt to handle HPD connect and disconnect events.
Changes in v8: None
Signed-off-by: Tanmay Shah <tanmay@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add display port support in DPU by creating hooks
for DP encoder enumeration and encoder mode
initialization.
changes in v2:
- rebase on [2] (Sean Paul)
- remove unwanted error checks and
switch cases (Jordan Crouse)
[1] https://lwn.net/Articles/768265/
[2] https://lkml.org/lkml/2018/11/17/87
changes in V3:
-- Moved this change as part of the DP driver changes.
-- Addressed compilation issues on the latest code base.
Changes in v6:
-- Fix checkpatch.pl warning
Changes in v7: Remove depends-on tag from commit message.
Changes in v8: None
Changes in v9: None
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
Signed-off-by: Vara Reddy <varar@codeaurora.org>
Signed-off-by: Tanmay Shah <tanmay@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add the needed DP PLL specific files to support
display port interface on msm targets.
The DP driver calls the DP PLL driver registration.
The DP driver sets the link and pixel clock sources.
Changes in v2:
-- Update copyright markings on all relevant files.
-- Use DRM_DEBUG_DP for debug msgs.
Changes in v4:
-- Update the DP link clock provider names
Changes in V5:
-- Addressed comments from Stephen Boyd, Rob clark.
Changes in V6:
-- Remove PLL as separate driver and include PLL as DP module
-- Remove redundant clock parsing from PLL module and make DP as
clock provider
-- Map USB3 DPCOM and PHY IO using hardcoded register address and
move mapping form parser to PLL module
-- Access DP PHY modules from same base address using offsets instead of
deriving base address of individual module from device tree.
-- Remove dp_pll_10nm_util.c and include its functionality in
dp_pll_10nm.c
-- Introduce new data structures private to PLL module
Changes in v7:
-- Remove DRM_MSM_DP_PLL config from Makefile and Kconfig
-- Remove set_parent from determin_rate API
-- Remove phy_pll_vco_div_clk from parent list
-- Remove flag CLK_DIVIDER_ONE_BASED
-- Remove redundant cell-index property parsing
Changes in v8:
-- Unregister hardware clocks during driver cleanup
Changes in v9:
-- Remove redundant Kconfig option DRM_MSM_DP_10NM_PLL
Changes in v10:
-- Limit 10nm PLL function scope
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
Signed-off-by: Vara Reddy <varar@codeaurora.org>
Signed-off-by: Tanmay Shah <tanmay@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add the needed displayPort files to enable DP driver
on msm target.
"dp_display" module is the main module that calls into
other sub-modules. "dp_drm" file represents the interface
between DRM framework and DP driver.
Changes in v12:
-- Add support of pm ops in display port driver
-- Clear bpp depth bits before writing to MISC register
-- Fix edid read
Previous Change log:
https://lkml.kernel.org/lkml/20200818051137.21478-3-tanmay@codeaurora.org/
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
Signed-off-by: Vara Reddy <varar@codeaurora.org>
Signed-off-by: Tanmay Shah <tanmay@codeaurora.org>
Co-developed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Co-developed-by: Kuogee Hsieh <khsieh@codeaurora.org>
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Co-developed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Guenter Roeck <groeck@chromium.org>
Co-developed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The constant N value (0x8000) is used by i915 DP
driver. Define this value in dp helper header file
to use in multiple Display Port drivers. Change
i915 driver accordingly.
Change in v6: Change commit message
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
Signed-off-by: Vara Reddy <varar@codeaurora.org>
Signed-off-by: Tanmay Shah <tanmay@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
As newer GPU families are added it makes less sense to maintain a
"generic" version functions for older families. Move adreno_submit()
and get_rptr() into the target specific code for a2xx, a3xx and a4xx.
Add a parameter to adreno_flush to pass the target specific WPTR register
instead of relying on the generic register.
All of this gets rid of the last of the REG_ADRENO offsets so remove all
all the register definitions and infrastructure.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Support the WHERE_AM_I opcode for the A618, A630 and A640 GPUs if the
microcode supports it. The WHERE_AM_I opcode allows the RPTR shadow
to be updated in priviliged memory which protects the shadow from being
read or written from user submissions.
A650 already supports extended APRIV have built in hardware support for
to access privilged memory from the CP and can go back to using the
hardware RPTR shadow feature.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Newer microcode versions have support for the CP_WHERE_AM_I opcode which
allows the RPTR shadow memory to be marked as privileged to protect it
from corruption. Move the RPTR shadow into its own buffer and protect it
it if the current microcode version supports the new feature.
We can also re-enable preemption for those targets that support
CP_WHERE_AM_I. Start out by preemptively assuming that we can enable
preemption and disable it in a5xx_hw_init if the microcode version comes
back as too old.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Introduce intel_hpd_hotplug_irqs() as a partner to
intel_hpd_enabled_irqs(). There's no need to care about the
encoders which we're not exposing, so we can avoid hardcoding
the masks in various places.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200630215601.28557-12-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Make a clean split between hpd pins for DDI vs. TC. This matches
how the actual hardware is split.
And with this we move the DDI/PHY->HPD pin mapping into the encoder
init instead of having to remap yet again in the interrupt code.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200630215601.28557-11-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Currently DP/HDMI/DDI encoders init their hpd_pin from the
connector init. Let's move it to the encoder init so that
we don't need to add platform specific junk to the connector
init (which is shared by all g4x+ platforms).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200630215601.28557-10-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
gen11_hpd_detection_setup() is missing ports TC5/6. Add them.
TODO: Might be nice to only enable the hpd detection logic
for ports we actually have. Should be rolled out for all
platforms if/when done...
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200630215601.28557-8-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
If we find the GPU didn't update the CSB within 50us, we currently fail
and eventually reset the GPU. Lets report the value from the mmio space
as a last resort, it may just stave off an unnecessary GPU reset.
References: HSDES#22011327657
Suggested-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200915134923.30088-4-chris@chris-wilson.co.uk
Since we expect to inline the csb_parse() routines, the w/a for the
stale CSB data on Tigerlake will be pulled into process_csb(), and so we
might as well simply reuse the logic for all, and so will hopefully
avoid any strange behaviour on Icelake that was not covered by our
previous w/a.
References: d8f5053117 ("drm/i915/icl: Forcibly evict stale csb entries")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Bruce Chang <yu.bruce.chang@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200915134923.30088-3-chris@chris-wilson.co.uk
On Tigerlake, we are seeing a repeat of commit d8f5053117 ("drm/i915/icl:
Forcibly evict stale csb entries") where, presumably, due to a missing
Global Observation Point synchronisation, the write pointer of the CSB
ringbuffer is updated _prior_ to the contents of the ringbuffer. That is
we see the GPU report more context-switch entries for us to parse, but
those entries have not been written, leading us to process stale events,
and eventually report a hung GPU.
However, this effect appears to be much more severe than we previously
saw on Icelake (though it might be best if we try the same approach
there as well and measure), and Bruce suggested the good idea of resetting
the CSB entry after use so that we can detect when it has been updated by
the GPU. By instrumenting how long that may be, we can set a reliable
upper bound for how long we should wait for:
513 late, avg of 61 retries (590 ns), max of 1061 retries (10099 ns)
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2045
References: d8f5053117 ("drm/i915/icl: Forcibly evict stale csb entries")
References: HSDES#22011327657, HSDES#1508287568
Suggested-by: Bruce Chang <yu.bruce.chang@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Bruce Chang <yu.bruce.chang@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: stable@vger.kernel.org # v5.4
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200915134923.30088-2-chris@chris-wilson.co.uk
A CSB entry is 64b, and it is simpler for us to treat it as an array of
64b entries than as an array of pairs of 32b entries.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200915134923.30088-1-chris@chris-wilson.co.uk
Instead of letting TTM make an educated guess based on
some mask all drivers should just specify what caching
they want for their CPU mappings.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/390207/
Instead of letting TTM masking the caching bits
specify directly what the driver needs.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/390206
As far as I can tell this was never used either and we just
always fallback to the order cached > wc > uncached anyway.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/390142/
The get_edid() callback can be triggered anytime by an ioctl, i.e
drm_mode_getconnector (ioctl)
-> drm_helper_probe_single_connector_modes
-> drm_bridge_connector_get_modes
-> ps8640_bridge_get_edid
Actually if the bridge pre_enable() function was not called before
get_edid(), the driver will not be able to get the EDID properly and
display will not work until a second get_edid() call is issued and if
pre_enable() is called before. The side effect of this, for example, is
that you see anything when `Frecon` starts, neither the splash screen,
until the graphical session manager starts.
To fix this we need to make sure that all we need is enabled before
reading the EDID. This means the following:
1. If get_edid() is called before having the device powered we need to
power on the device. In such case, the driver will power off again the
device.
2. If get_edid() is called after having the device powered, all should
just work. We added a powered flag in order to avoid recurrent calls
to ps8640_bridge_poweron() and unneeded delays.
3. This seems to be specific for this device, but we need to make sure
the panel is powered on before do a power on cycle on this device.
Otherwise the device fails to retrieve the EDID.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Bilal Wasim <bwasim.lkml@gmail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200827085911.944899-2-enric.balletbo@collabora.com
Since the display hardware is all there even when INTEL_DISPLAY_ENABLED
return false we have to be capable of shutting it down cleanly so
as to not anger the hw. To that end let's reduce the effect of
!INTEL_DISPLAY_ENABLE to just treating all outputs as disconnected.
Should prevent anyone from automagically enabling any of them, while
still allowing us to cleanly shut them down.
v2: Put the check into the right place for CRT
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200910164256.25983-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Having a mode where the display hardware is present but we try
to pretend it isn't just leads to massive headaches when trying
to reason what the fallout might be from skipping some random
bits of programming.
Let's just neuter INTEL_DISPLAY_ENABLED so that we treat the
hardware as fully present, except we just don't register any
outputs. That's still rather sketchy if the outputs are already
enabled when the driver is loaded. I think the simplest solution
would be to probe everything as normal and just return
disconnected" from all .detect() hooks. That would avoid anything
automagically enabling those outputs, but the driver could then
shut things down using the normal codepaths.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200909213824.12390-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Usually we wait for the host to complete the unref request, then cleanup
the guest-side state of the object in the completion callback. When
submitting the unref command failed the completion callback will not be
called though, so cleanup right away.
Fixes a WARN on stale mm entries on driver shutdown.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20200908070723.6394-4-kraxel@redhat.com
If we create a new node, it is possible for the slab allocator to return
us a recently freed node. If that node was just retired, it will retain
the current jiffy as its node->age. There is then a miniscule window,
where as that node is retired, it will appear on the free list with an
incorrect age and be eligible for reuse by one thread, and then by a
second thread as the correct node->age is written.
Fixes: 06b73c2d0b ("drm/i915/gt: Delay taking the spinlock for grabbing from the buffer pool")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200915091417.4086-3-chris@chris-wilson.co.uk
On 32b, highmem using a finite set of indirect PTE (i.e. vmap) to provide
virtual mappings of the high pages. As these are finite, map_new_virtual()
must wait for some other kmap() to finish when it runs out. If we map a
large number of objects, there is no method for it to tell us to release
the mappings, and we deadlock.
However, if we make an explicit vmap of the page, that uses a larger
vmalloc arena, and also has the ability to tell us to release unwanted
mappings. Most importantly, it will fail and propagate an error instead
of waiting forever.
Fixes: fb8621d3be ("drm/i915: Avoid allocating a vmap arena for a single page") #x86-32
References: e87666b52f ("drm/i915/shrinker: Hook up vmap allocation failure notifier")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Cc: <stable@vger.kernel.org> # v4.7+
Link: https://patchwork.freedesktop.org/patch/msgid/20200915091417.4086-1-chris@chris-wilson.co.uk
Ingenic SoCs are most notably used in cheap chinese handheld gaming
consoles. There, the games and applications generally render in software
directly into GEM buffers.
Traditionally, GEM buffers are mapped write-combine. Writes to the
buffer are accelerated, and reads are slow. Application doing lots of
alpha-blending paint inside shadow buffers, which is then memcpy'd into
the final GEM buffer.
On recent Ingenic SoCs however, it is much faster to have a fully cached
GEM buffer, in which applications paint directly, and whose data is
invalidated before scanout, than having a write-combine GEM buffer, even
when alpha blending is not used.
Add an optional 'cached_gem_buffers' parameter to the ingenic-drm driver
to allow GEM buffers to be mapped fully-cached, in order to speed up
software rendering.
v2: Use standard noncoherent DMA APIs
v3: Use damage clips instead of invalidating full frames
v4: Avoid dma_pgprot() which is not exported. Using vm_get_page_prot()
is enough in this case.
v5:
- Avoid calling drm_gem_cma_prime_mmap(). It has the side effect that an
extra object reference is obtained, which causes our dumb buffers to
never be freed. It should have been drm_gem_cma_mmap_obj(). However,
our custom mmap function only differs with one flag, so we can cleanly
handle both modes in ingenic_drm_gem_mmap().
- Call drm_gem_vm_close() if drm_mmap_attrs() failed, just like in
drm_gem_cma_mmap_obj().
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200912195639.176001-1-paul@crapouillou.net
We update the timestamping constants per-crtc explicitly in
intel_crtc_update_active_timings(). Furtermore the helper will
use uapi.adjusted_mode whereas we want hw.adjusted_mode. Thus
let's drop the helper call an rely on what we already have in
intel_crtc_update_active_timings(). We can now also drop the
hw.adjusted_mode -> uapi.adjusted_mode copy hack that was added
to keep the helper from deriving the timestamping constants from
the wrong thing.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200907120026.6360-3-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The timestamping constants have nothing to do with any legacy state
so should not be updated from
drm_atomic_helper_update_legacy_modeset_state().
Let's make everyone call drm_atomic_helper_calc_timestamping_constants()
directly instead of relying on
drm_atomic_helper_update_legacy_modeset_state() to call it.
@@
expression S;
@@
- drm_atomic_helper_calc_timestamping_constants(S);
@@
expression D, S;
@@
drm_atomic_helper_update_legacy_modeset_state(D, S);
+ drm_atomic_helper_calc_timestamping_constants(S);
v2: Update drm_crtc_vblank_helper_get_vblank_timestamp{,_internal}() docs (Daniel)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200907120026.6360-2-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Put the vblank timestamping constants update loop into its own
function. It has no business living inside
drm_atomic_helper_update_legacy_modeset_state() so we'll be wanting
to move it out entirely. As a first step we'll still call it
from drm_atomic_helper_update_legacy_modeset_state().
v2: Drop comment about 'legacy state' in the new function
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200907120026.6360-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl9epdgeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG9IMH/jHCRSbcsIXHuQHn
xcRLlhrDHfXoBza7auHfPWx2+9DZsmaSJs/SEiTGNag0Bi7jBcWcwBpsep7iVG/+
WiftD5uOMhZigyuvfMFrt0mjr2Kr3wg5p58lwMBeBdm8iL5uKV8ehKsh05/Fral2
6hu3jP8L0PCZMpF+sZ7s2jlhfVUMmjA8VzXZCvgQtmhoraHiF3mzfkcSMxnHwBPO
HLo+TDDm49u+LbVsJT7+cSTiWxuUJCbix9Q4PCTx/BGg4ezYsjc6v0BnYRaYtrrA
1uYiT6PVBEUkYYBHKQlD3N2KnUmbKx7dGUF4t+peTg5/JiocAJMNi1N9Qzvv7N6Q
CqTiuio=
=q+kJ
-----END PGP SIGNATURE-----
Merge v5.9-rc5 into drm-next
Paul needs 1a21e5b930 ("drm/ingenic: Fix leak of device_node
pointer") and 3b5b005ef7 ("drm/ingenic: Fix driver not probing when
IPU port is missing") from -fixes to be able to merge further ingenic
patches into -next.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
g4x+ sprites have an extra cdclk limitation listed for RGB formats.
For some random reason I chose to use cpp>=4 as the check for that.
While that does actually work let's deobfuscate it by checking
for !is_yuv instead. I suspect is_yuv didn't exist way back when
I originally write the code.
Also drop the duplicate comment.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200206201204.31704-2-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
Even if we're not doing downscaling we should account for
some of the extra dotclock limitations for g4x+ sprites. In
particular we must never exceed the 90% rule, and with RGB
that limits actually drops to 80%.
So instead of bailing out when upscaling let's clamp the
scaling factor appropriately and go through the rest of
calculation normally. By luck we already did the full
calculations for the 1:1 case.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200206201204.31704-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The CACHE_MODE_0 save/restore was added without explanation in
commit 1f84e550a8 ("drm/i915 more registers for S3 (DSPCLK_GATE_D,
CACHE_MODE_0, MI_ARB_STATE)"). If there are any bits we care about
those should be set explicitly during some appropriate init function.
Let's assume it's all good and just nuke this magic save/restore.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200908140210.31048-4-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
Originally added in commit 1f84e550a8 ("drm/i915 more registers for
S3 (DSPCLK_GATE_D, CACHE_MODE_0, MI_ARB_STATE)") to fix some underruns.
I suspect that was due to the trickle feed settings getting clobbered
during suspend. We've been disabling trickle feed explicitly since
commit 20f949670f ("drm/i915: Disable trickle feed via MI_ARB_STATE
for the gen4") so this magic save/restore should no longer be needed.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200908140210.31048-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The FBC_CONTROL save restore is there just to preserve the
compression interval setting. Since commit a68ce21ba0
("drm/i915/fbc: Store the fbc1 compression interval in the params")
we've been explicitly setting the interval to a specific
value, so the sace/restore is now entirely pointless.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200908140210.31048-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Current BDW virtual display port is initialized as PORT_B, so need
to use same port for VFIO EDID region, otherwise invalid EDID blob
pointer is assigned which caused kernel null pointer reference. We
might evaluate actual display hotplug for BDW to make this function
work as expected, anyway this is always required to be fixed first.
Reported-by: Alejandro Sior <aho@sior.be>
Cc: Alejandro Sior <aho@sior.be>
Fixes: 0178f4ce3c ("drm/i915/gvt: Enable vfio edid for all GVT supported platform")
Reviewed-by: Hang Yuan <hang.yuan@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200914030302.2775505-1-zhenyuw@linux.intel.com
VRAM helpers support ref counting for pin and vmap operations, no need
to avoid these operations by employing the internal kmap interface. Just
use drm_gem_vram_vmap() and let it handle the details.
Also unexport the kmap interfaces from VRAM helpers. Vboxvideo was the
last user of these internal functions.
v2:
* fixed a comma in commit description
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200911075922.19317-1-tzimmermann@suse.de
Convert mtk_dpi to a bridge driver with built-in encoder support for
compatibility with existing component drivers.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
This is really a cosmetic change just to make a bit more readable the
code after convert the driver to drm_bridge. The bridge variable name
will be used by the encoder drm_bridge, and the chained bridge will be
named next_bridge.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
In $debugfs/gem we already show any vma(s) associated with an object.
Also show process names if the vma's address space is a per-process
address space.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add support for using per-instance pagetables if all the dependencies are
available.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Akhil P Oommen <akhilpo@codeaurora.org>
Add support for allocating private address space instances. Targets that
support per-context pagetables should implement their own function to
allocate private address spaces.
The default will return a pointer to the global address space.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add support to create a io-pgtable for use by targets that support
per-instance pagetables. In order to support per-instance pagetables the
GPU SMMU device needs to have the qcom,adreno-smmu compatible string and
split pagetables enabled.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Use the aperture settings from the IOMMU domain to set up the virtual
address range for the GPU. This allows us to transparently deal with
IOMMU side features (like split pagetables).
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Now that we can get the ctx from the submitqueue, the extra arg is
redundant.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
[split out of previous patch to reduce churny noise]
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Each submitqueue is attached to a context. Add a pointer to the
context to the submitqueue at create time and refcount it so
that it stays around through the life of the queue.
Co-developed-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This will be populated by adreno-smmu, to provide a way for coordinating
enabling/disabling TTBR0 translation.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
In a later patch, the drvdata will not directly be 'struct msm_gpu *',
so add a helper to reduce the churn.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Currently it doesn't matter, since we free the ctx immediately. But
when we start refcnt'ing the ctx, we don't want old dangling list
entries to hang around.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
It's allocating an array of a6xx_gpu_state_obj structure rathor than
its pointers.
This patch fix it.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@gmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The function iommu_domain_alloc returns NULL on platforms without IOMMU
such as msm8974. This resulted in PTR_ERR(-ENODEV) being assigned to
gpu->aspace so the correct code path wasn't taken.
Fixes: ccac7ce373 ("drm/msm: Refactor address space initialization")
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
This adds support for the 7nm ("V4") DSI PHY/PLL for sm8150 and sm8250.
Implementation is based on 10nm driver, but updated based on the downstream
7nm driver.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> (SM8250)
Signed-off-by: Rob Clark <robdclark@chromium.org>
This allows DSI driver to work with sm8150 and sm8250. The sdm845 config
is re-used as the config is the same.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> (SM8250)
Signed-off-by: Rob Clark <robdclark@chromium.org>
The clk_pre/clk_post values in shared_timings are used instead, and these
are unused.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> (SM8250)
Signed-off-by: Rob Clark <robdclark@chromium.org>
Since commit 9495b7e92f ("driver core: platform: Initialize dma_parms
for platform devices"), struct platform_device already provides a
dma_parms structure, so we can save allocating another one.
Also the DMA segment size is simply a size, not a bitmask.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
This addresses the following gcc warning with "make W=1":
drivers/gpu/drm/xlnx/zynqmp_disp.c:245:18: warning:
‘scaling_factors_666’ defined but not used [-Wunused-const-variable=]
245 | static const u32 scaling_factors_666[] = {
| ^~~~~~~~~~~~~~~~~~~
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200910140630.1191782-1-yanaijie@huawei.com
There's no real reason to stash away the DPIO PHY IOSF sideband port
numbers for VLV/CHV. Just compute them at runtime in the sideband code.
Gets rid of the oddball intel_init_dpio() function from the high level
init flow.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200907162709.29579-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
kmemdup can be used instead of kmalloc+memcpy. Replace an occurrence of
this pattern.
Issue identified with Coccinelle.
Signed-off-by: Alex Dewar <alex.dewar90@gmail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200909190213.156302-1-alex.dewar90@gmail.com
It's not supported to specify more than one of those flags.
So it never made sense to make this a flag in the first place.
Nuke the flags and specify directly which memory type to use.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/389826/?series=81551&rev=1
Those are going to be removed, stop using them here.
Instead use the GEM flags from the UAPI.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/389825/?series=81551&rev=1
Those are going to be removed, stop using them here.
Instead define separate flags for the helper.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/389823/?series=81551&rev=1
Logically part of the display restore.
Note: This has been in place since the introduction of gmbus
support. The gmbus code also does the resets before transfers. Is this
really needed, or a historical accident?
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200910095227.9466-3-jani.nikula@intel.com
Disable all display feature flags when there are no pipes i.e. there is
no display. This should help with not having to additionally check for
HAS_DISPLAY() when a feature flag check would suffice.
Also disable modeset and atomic driver features.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200910095227.9466-1-jani.nikula@intel.com
Clang warns:
drivers/gpu/drm/vc4/vc4_plane.c:901:27: warning: operator '?:' has lower
precedence than '|'; '|' will be evaluated first
[-Wbitwise-conditional-parentheses]
fb->format->has_alpha ?
~~~~~~~~~~~~~~~~~~~~~ ^
drivers/gpu/drm/vc4/vc4_plane.c:901:27: note: place parentheses around
the '|' expression to silence this warning
fb->format->has_alpha ?
~~~~~~~~~~~~~~~~~~~~~ ^
drivers/gpu/drm/vc4/vc4_plane.c:901:27: note: place parentheses around
the '?:' expression to evaluate it first
fb->format->has_alpha ?
~~~~~~~~~~~~~~~~~~~~~~^
1 warning generated.
Add the parentheses as that was clearly intended, otherwise
SCALER5_CTL2_ALPHA_PREMULT won't be added to the list.
Fixes: c54619b0bf ("drm/vc4: Add support for the BCM2711 HVS5")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1150
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200910171831.4112580-1-natechancellor@gmail.com
Clang warns 100+ times in the vc4 driver along the lines of:
drivers/gpu/drm/vc4/vc4_hdmi_phy.c:518:13: warning: implicit conversion
from enumeration type 'enum vc4_hdmi_field' to different enumeration
type 'enum vc4_hdmi_regs' [-Wenum-conversion]
HDMI_WRITE(HDMI_TX_PHY_POWERDOWN_CTL,
~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
The HDMI_READ and HDMI_WRITE macros pass in enumerators of type
vc4_hdmi_field but vc4_hdmi_write and vc4_hdmi_read expect a enumerator
of type vc4_hdmi_regs, causing a warning for every instance of this.
Update the parameter type so there is no more mismatch.
Fixes: 311e305fdb ("drm/vc4: hdmi: Implement a register layout abstraction")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1149
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200910170401.3857250-1-natechancellor@gmail.com
This function always return '0' and no callers use the return value. So
make it a void function.
This eliminates the following coccicheck warning:
drivers/gpu/drm/i810/i810_dma.c:860:8-11: Unneeded variable: "ret".
Return "0" on line 885
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200910140610.1191578-1-yanaijie@huawei.com
Gets rid of drmm_add_final_kfree, which I want to unexport so that it
stops confusion people about this transitional state of rolling drm
managed memory out.
This also fixes the missing drm_dev_put in the error path of the probe
code.
v2: Drop the misplaced drm_dev_put from zynqmp_dpsub_drm_init (all
other paths leaked on error, this should have been in
zynqmp_dpsub_probe), now that subsumed by the auto-cleanup of
devm_drm_dev_alloc.
Reviewed-by: Hyun Kwon <hyun.kwon@xilinx.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Hyun Kwon <hyun.kwon@xilinx.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200907082225.150837-1-daniel.vetter@ffwll.ch
This means we also need to slightly restructure the exit code, so that
final cleanup of the drm_device is triggered by unregistering the
platform device. Note that devres is both clean up when the driver is
unbound (not the case for vkms, we don't bind), and also when unregistering
the device (very much the case for vkms). Therefore we can rely on devres
even though vkms isn't a proper platform device driver.
This also somewhat untangles the load code, since the drm and platform device
setup are no longer interleaved, but two distinct steps.
v2: use devres_open/release_group so we can use devm without real
hacks in the driver core or having to create an entire fake bus for
testing drivers. Might want to extract this into helpers eventually,
maybe as a mock_drm_dev_alloc or test_drm_dev_alloc.
v3: Only deref vkms_device after checking it (Melissa)
Reviewed-by: Melissa Wen <melissa.srw@gmail.com>
Cc: Melissa Wen <melissa.srw@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200909091833.440548-1-daniel.vetter@ffwll.ch
This means we also need to slightly restructure the exit code, so that
final cleanup of the drm_device is triggered by unregistering the
platform device. Note that devres is both clean up when the driver is
unbound (not the case for vgem, we don't bind), and also when unregistering
the device (very much the case for vgem). Therefore we can rely on devres
even though vgem isn't a proper platform device driver.
This also somewhat untangles the load code, since the drm and platform device
setup are no longer interleaved, but two distinct steps.
v2: use devres_open/release_group so we can use devm without real
hacks in the driver core or having to create an entire fake bus for
testing drivers. Might want to extract this into helpers eventually,
maybe as a mock_drm_dev_alloc or test_drm_dev_alloc.
v3: Fix error code handling (Melissa)
Cc: Melissa Wen <melissa.srw@gmail.com>
Reviewed-by: Melissa Wen <melissa.srw@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Rob Clark <robdclark@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200909120745.716178-1-daniel.vetter@ffwll.ch
Also remove the now no longer needed build bug on since that's already
not needed anymore with drmm_add_final_kfree. Conversion to managed
drm_device cleanup is easy, the final drm_dev_put() is already the
last thing in both the bind unbind as in the unbind flow.
Also, this relies on component.c correctly wrapping bind&unbind in
separate devres groups, which it does.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200904143941.110665-2-daniel.vetter@ffwll.ch
- Fix double free in virtio.
- Add missing put_device in sun4i, and other fixes.
- Small ingenic fixes.
- Handle sun4i alpha on lowest plane correctly.
- Remove output->enabled from virtio, as it should use crtc_state.
- Fix tve200 enable/disable.
- Documentation fix.
- Fix virtio unblank.
-----BEGIN PGP SIGNATURE-----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=pqMB
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2020-09-09' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v5.9-rc5:
- Fix double free in virtio.
- Add missing put_device in sun4i, and other fixes.
- Small ingenic fixes.
- Handle sun4i alpha on lowest plane correctly.
- Remove output->enabled from virtio, as it should use crtc_state.
- Fix tve200 enable/disable.
- Documentation fix.
- Fix virtio unblank.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/478b49d1-b1b3-c983-7056-8a89249be435@mblankhorst.nl
Header frame.h is getting more code annotations to help objtool analyze
object files.
Rename the file to objtool.h.
[ jpoimboe: add objtool.h to MAINTAINERS ]
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
This function should be an int, not a bool.
Presumably because we had the same 2 reverts in a slightly different
way, git got confused.
Thanks to Dan for reporting. :)
The conflict is between the 3 reverts in drm-fixes:
4993a8a378 ("Revert "drm/i915: Remove i915_gem_object_get_dirty_page()"")
ad5d95e4d5 ("Revert "drm/i915/gem: Async GPU relocations only"")
20561da3a2 ("Revert "drm/i915/gem: Delete unused code"")
And the slightly different combined revert in drm-intel-gt-next, but
with the same goal:
102a0a9051 ("Revert "drm/i915/gem: Async GPU relocations only"")
In the merge commit 1f4b2aca79 ("Merge tag
'drm-intel-gt-next-2020-09-07' of git://anongit.freedesktop.org/drm/drm-intel into drm-next") things
went wrong, but the merge commit view now doesn't show any conflict
anymore (as git tends to do when the resolution picks one or the other
branch).
The need to handle other than just true/false error codes in
__reloc_entry_gpu was added in the dma_resv locking changes in
c43ce12328 ("drm/i915: Use per object locking in execbuf, v12.")
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Dave Airlie <airlied@redhat.com>
[danvet: Explain this entire saga a lot better, adding tons of commit
references. Also note that this was merged before full intel-gfx-CI
results, only after BAT, since the breakage at the BAT run is already
severe enough to block all pre-merge testing.]
Fixes: 1f4b2aca79 ("Merge tag 'drm-intel-gt-next-2020-09-07' of git://anongit.freedesktop.org/drm/drm-intel into drm-next")
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200910111225.2184193-1-maarten.lankhorst@linux.intel.com
The GPU 'CONFIG' registers used to work around hardware issues are
cleared on reset so need to be programmed every time the GPU is reset.
However panfrost_device_reset() failed to do this.
To avoid this in future instead move the call to
panfrost_gpu_init_quirks() to panfrost_gpu_power_on() so that the
regsiters are always programmed just before the cores are powered.
Fixes: f3ba91228e ("drm/panfrost: Add initial panfrost driver")
Signed-off-by: Steven Price <steven.price@arm.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200909122957.51667-1-steven.price@arm.com
"Allwinner V3s" has secondary video layer (VI).
Decoded video is displayed in wrong colors until
secondary CSC registers are programmed correctly.
Fixes: 8830293905 ("drm/sun4i: Add DE2 CSC library")
Signed-off-by: Martin Cerveny <m.cerveny@computer.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200906162140.5584-2-m.cerveny@computer.org
The variant->registers[] has ->num_registers elements so the >
comparison needs to be changes to >= to prevent an out of bounds
access.
Fixes: 311e305fdb ("drm/vc4: hdmi: Implement a register layout abstraction")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200910100748.GA79916@mwanda
When compiling for 32bit platforms, the compilation fails with:
ERROR: modpost: "__aeabi_ldivmod"
[drivers/gpu/drm/imx/dcss/imx-dcss.ko] undefined!
ERROR: modpost: "__aeabi_uldivmod"
[drivers/gpu/drm/imx/dcss/imx-dcss.ko] undefined!
This patch adds a dependency on ARM64 since no 32bit SoCs have DCSS, so far.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Reported-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200910095250.7663-1-laurentiu.palcu@oss.nxp.com
Kbuild warns when this file is built as a loadable module:
WARNING: modpost: missing MODULE_LICENSE() in drivers/gpu/drm/panel/panel-samsung-s6e63m0.o
Add the missing license/author/description tags.
Fixes: b7b23e4476 ("drm/panel: s6e63m0: Break out SPI transport")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200909134137.32284-1-yuehaibing@huawei.com
The Documentation/DMA-API-HOWTO.txt states that the dma_map_sg() function
returns the number of the created entries in the DMA address space.
However the subsequent calls to the dma_sync_sg_for_{device,cpu}() and
dma_unmap_sg must be called with the original number of the entries
passed to the dma_map_sg().
struct sg_table is a common structure used for describing a non-contiguous
memory buffer, used commonly in the DRM and graphics subsystems. It
consists of a scatterlist with memory pages and DMA addresses (sgl entry),
as well as the number of scatterlist entries: CPU pages (orig_nents entry)
and DMA mapped pages (nents entry).
It turned out that it was a common mistake to misuse nents and orig_nents
entries, calling DMA-mapping functions with a wrong number of entries or
ignoring the number of mapped entries returned by the dma_map_sg()
function.
To avoid such issues, lets use a common dma-mapping wrappers operating
directly on the struct sg_table objects and use scatterlist page
iterators where possible. This, almost always, hides references to the
nents and orig_nents entries, making the code robust, easier to follow
and copy/paste safe.
dma_map_sgtable() function returns zero or an error code, so adjust the
return value check for the vsp1_du_map_sg() function.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The Documentation/DMA-API-HOWTO.txt states that the dma_map_sg() function
returns the number of the created entries in the DMA address space.
However the subsequent calls to the dma_sync_sg_for_{device,cpu}() and
dma_unmap_sg must be called with the original number of the entries
passed to the dma_map_sg().
struct sg_table is a common structure used for describing a non-contiguous
memory buffer, used commonly in the DRM and graphics subsystems. It
consists of a scatterlist with memory pages and DMA addresses (sgl entry),
as well as the number of scatterlist entries: CPU pages (orig_nents entry)
and DMA mapped pages (nents entry).
It turned out that it was a common mistake to misuse nents and orig_nents
entries, calling DMA-mapping functions with a wrong number of entries or
ignoring the number of mapped entries returned by the dma_map_sg()
function.
To avoid such issues, lets use a common dma-mapping wrappers operating
directly on the struct sg_table objects and use scatterlist page
iterators where possible. This, almost always, hides references to the
nents and orig_nents entries, making the code robust, easier to follow
and copy/paste safe.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
The Documentation/DMA-API-HOWTO.txt states that the dma_map_sg() function
returns the number of the created entries in the DMA address space.
However the subsequent calls to the dma_sync_sg_for_{device,cpu}() and
dma_unmap_sg must be called with the original number of the entries
passed to the dma_map_sg().
struct sg_table is a common structure used for describing a non-contiguous
memory buffer, used commonly in the DRM and graphics subsystems. It
consists of a scatterlist with memory pages and DMA addresses (sgl entry),
as well as the number of scatterlist entries: CPU pages (orig_nents entry)
and DMA mapped pages (nents entry).
It turned out that it was a common mistake to misuse nents and orig_nents
entries, calling DMA-mapping functions with a wrong number of entries or
ignoring the number of mapped entries returned by the dma_map_sg()
function.
Fix the code to refer to proper nents or orig_nents entries. This driver
reports the number of the pages in the imported scatterlist, so it should
refer to sg_table->orig_nents entry.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
The Documentation/DMA-API-HOWTO.txt states that the dma_map_sg() function
returns the number of the created entries in the DMA address space.
However the subsequent calls to the dma_sync_sg_for_{device,cpu}() and
dma_unmap_sg must be called with the original number of the entries
passed to the dma_map_sg().
struct sg_table is a common structure used for describing a non-contiguous
memory buffer, used commonly in the DRM and graphics subsystems. It
consists of a scatterlist with memory pages and DMA addresses (sgl entry),
as well as the number of scatterlist entries: CPU pages (orig_nents entry)
and DMA mapped pages (nents entry).
It turned out that it was a common mistake to misuse nents and orig_nents
entries, calling DMA-mapping functions with a wrong number of entries or
ignoring the number of mapped entries returned by the dma_map_sg()
function.
To avoid such issues, lets use a common dma-mapping wrappers operating
directly on the struct sg_table objects and use scatterlist page
iterators where possible. This, almost always, hides references to the
nents and orig_nents entries, making the code robust, easier to follow
and copy/paste safe.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Roland Scheidegger <sroland@vmware.com>
The Documentation/DMA-API-HOWTO.txt states that the dma_map_sg() function
returns the number of the created entries in the DMA address space.
However the subsequent calls to the dma_sync_sg_for_{device,cpu}() and
dma_unmap_sg must be called with the original number of the entries
passed to the dma_map_sg().
struct sg_table is a common structure used for describing a non-contiguous
memory buffer, used commonly in the DRM and graphics subsystems. It
consists of a scatterlist with memory pages and DMA addresses (sgl entry),
as well as the number of scatterlist entries: CPU pages (orig_nents entry)
and DMA mapped pages (nents entry).
It turned out that it was a common mistake to misuse nents and orig_nents
entries, calling DMA-mapping functions with a wrong number of entries or
ignoring the number of mapped entries returned by the dma_map_sg()
function.
To avoid such issues, lets use a common dma-mapping wrappers operating
directly on the struct sg_table objects and use scatterlist page
iterators where possible. This, almost always, hides references to the
nents and orig_nents entries, making the code robust, easier to follow
and copy/paste safe.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
The Documentation/DMA-API-HOWTO.txt states that the dma_map_sg() function
returns the number of the created entries in the DMA address space.
However the subsequent calls to the dma_sync_sg_for_{device,cpu}() and
dma_unmap_sg must be called with the original number of the entries
passed to the dma_map_sg().
struct sg_table is a common structure used for describing a non-contiguous
memory buffer, used commonly in the DRM and graphics subsystems. It
consists of a scatterlist with memory pages and DMA addresses (sgl entry),
as well as the number of scatterlist entries: CPU pages (orig_nents entry)
and DMA mapped pages (nents entry).
It turned out that it was a common mistake to misuse nents and orig_nents
entries, calling DMA-mapping functions with a wrong number of entries or
ignoring the number of mapped entries returned by the dma_map_sg()
function.
To avoid such issues, lets use a common dma-mapping wrappers operating
directly on the struct sg_table objects and use scatterlist page
iterators where possible. This, almost always, hides references to the
nents and orig_nents entries, making the code robust, easier to follow
and copy/paste safe.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
The Documentation/DMA-API-HOWTO.txt states that the dma_map_sg() function
returns the number of the created entries in the DMA address space.
However the subsequent calls to the dma_sync_sg_for_{device,cpu}() and
dma_unmap_sg must be called with the original number of the entries
passed to the dma_map_sg().
struct sg_table is a common structure used for describing a non-contiguous
memory buffer, used commonly in the DRM and graphics subsystems. It
consists of a scatterlist with memory pages and DMA addresses (sgl entry),
as well as the number of scatterlist entries: CPU pages (orig_nents entry)
and DMA mapped pages (nents entry).
It turned out that it was a common mistake to misuse nents and orig_nents
entries, calling DMA-mapping functions with a wrong number of entries or
ignoring the number of mapped entries returned by the dma_map_sg()
function.
To avoid such issues, lets use a common dma-mapping wrappers operating
directly on the struct sg_table objects and use scatterlist page
iterators where possible. This, almost always, hides references to the
nents and orig_nents entries, making the code robust, easier to follow
and copy/paste safe.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
The Documentation/DMA-API-HOWTO.txt states that the dma_map_sg() function
returns the number of the created entries in the DMA address space.
However the subsequent calls to the dma_sync_sg_for_{device,cpu}() and
dma_unmap_sg must be called with the original number of the entries
passed to the dma_map_sg().
struct sg_table is a common structure used for describing a non-contiguous
memory buffer, used commonly in the DRM and graphics subsystems. It
consists of a scatterlist with memory pages and DMA addresses (sgl entry),
as well as the number of scatterlist entries: CPU pages (orig_nents entry)
and DMA mapped pages (nents entry).
It turned out that it was a common mistake to misuse nents and orig_nents
entries, calling DMA-mapping functions with a wrong number of entries or
ignoring the number of mapped entries returned by the dma_map_sg()
function.
To avoid such issues, lets use a common dma-mapping wrappers operating
directly on the struct sg_table objects and use scatterlist page
iterators where possible. This, almost always, hides references to the
nents and orig_nents entries, making the code robust, easier to follow
and copy/paste safe.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Use common helper for checking the contiguity of the imported dma-buf.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
The Documentation/DMA-API-HOWTO.txt states that the dma_map_sg() function
returns the number of the created entries in the DMA address space.
However the subsequent calls to the dma_sync_sg_for_{device,cpu}() and
dma_unmap_sg must be called with the original number of the entries
passed to the dma_map_sg().
struct sg_table is a common structure used for describing a non-contiguous
memory buffer, used commonly in the DRM and graphics subsystems. It
consists of a scatterlist with memory pages and DMA addresses (sgl entry),
as well as the number of scatterlist entries: CPU pages (orig_nents entry)
and DMA mapped pages (nents entry).
It turned out that it was a common mistake to misuse nents and orig_nents
entries, calling DMA-mapping functions with a wrong number of entries or
ignoring the number of mapped entries returned by the dma_map_sg()
function.
To avoid such issues, lets use a common dma-mapping wrappers operating
directly on the struct sg_table objects and use scatterlist page
iterators where possible. This, almost always, hides references to the
nents and orig_nents entries, making the code robust, easier to follow
and copy/paste safe.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Use common helper for converting a sg_table object into struct
page pointer array.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
The Documentation/DMA-API-HOWTO.txt states that the dma_map_sg() function
returns the number of the created entries in the DMA address space.
However the subsequent calls to the dma_sync_sg_for_{device,cpu}() and
dma_unmap_sg must be called with the original number of the entries
passed to the dma_map_sg().
struct sg_table is a common structure used for describing a non-contiguous
memory buffer, used commonly in the DRM and graphics subsystems. It
consists of a scatterlist with memory pages and DMA addresses (sgl entry),
as well as the number of scatterlist entries: CPU pages (orig_nents entry)
and DMA mapped pages (nents entry).
It turned out that it was a common mistake to misuse nents and orig_nents
entries, calling DMA-mapping functions with a wrong number of entries or
ignoring the number of mapped entries returned by the dma_map_sg()
function.
To avoid such issues, lets use a common dma-mapping wrappers operating
directly on the struct sg_table objects and use scatterlist page
iterators where possible. This, almost always, hides references to the
nents and orig_nents entries, making the code robust, easier to follow
and copy/paste safe.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Use common helper for converting a sg_table object into struct
page pointer array.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Use common helper for checking the contiguity of the imported dma-buf and
do this check before allocating resources, so the error path is simpler.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
The Documentation/DMA-API-HOWTO.txt states that the dma_map_sg() function
returns the number of the created entries in the DMA address space.
However the subsequent calls to the dma_sync_sg_for_{device,cpu}() and
dma_unmap_sg must be called with the original number of the entries
passed to the dma_map_sg().
struct sg_table is a common structure used for describing a non-contiguous
memory buffer, used commonly in the DRM and graphics subsystems. It
consists of a scatterlist with memory pages and DMA addresses (sgl entry),
as well as the number of scatterlist entries: CPU pages (orig_nents entry)
and DMA mapped pages (nents entry).
It turned out that it was a common mistake to misuse nents and orig_nents
entries, calling DMA-mapping functions with a wrong number of entries or
ignoring the number of mapped entries returned by the dma_map_sg()
function.
To avoid such issues, lets use a common dma-mapping wrappers operating
directly on the struct sg_table objects and use scatterlist page
iterators where possible. This, almost always, hides references to the
nents and orig_nents entries, making the code robust, easier to follow
and copy/paste safe.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Qiang Yu <yuq825@gmail.com>
The Documentation/DMA-API-HOWTO.txt states that the dma_map_sg() function
returns the number of the created entries in the DMA address space.
However the subsequent calls to the dma_sync_sg_for_{device,cpu}() and
dma_unmap_sg must be called with the original number of the entries
passed to the dma_map_sg().
struct sg_table is a common structure used for describing a non-contiguous
memory buffer, used commonly in the DRM and graphics subsystems. It
consists of a scatterlist with memory pages and DMA addresses (sgl entry),
as well as the number of scatterlist entries: CPU pages (orig_nents entry)
and DMA mapped pages (nents entry).
It turned out that it was a common mistake to misuse nents and orig_nents
entries, calling DMA-mapping functions with a wrong number of entries or
ignoring the number of mapped entries returned by the dma_map_sg()
function.
This driver creatively uses sg_table->orig_nents to store the size of the
allocated scatterlist and ignores the number of the entries returned by
dma_map_sg function. The sg_table->orig_nents is (mis)used to properly
free the (over)allocated scatterlist.
This patch only introduces the common DMA-mapping wrappers operating
directly on the struct sg_table objects to the dmabuf related functions,
so the other drivers, which might share buffers with i915 could rely on
the properly set nents and orig_nents values.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
The Documentation/DMA-API-HOWTO.txt states that the dma_map_sg() function
returns the number of the created entries in the DMA address space.
However the subsequent calls to the dma_sync_sg_for_{device,cpu}() and
dma_unmap_sg must be called with the original number of the entries
passed to the dma_map_sg().
struct sg_table is a common structure used for describing a non-contiguous
memory buffer, used commonly in the DRM and graphics subsystems. It
consists of a scatterlist with memory pages and DMA addresses (sgl entry),
as well as the number of scatterlist entries: CPU pages (orig_nents entry)
and DMA mapped pages (nents entry).
It turned out that it was a common mistake to misuse nents and orig_nents
entries, calling DMA-mapping functions with a wrong number of entries or
ignoring the number of mapped entries returned by the dma_map_sg()
function.
To avoid such issues, lets use a common dma-mapping wrappers operating
directly on the struct sg_table objects and use scatterlist page
iterators where possible. This, almost always, hides references to the
nents and orig_nents entries, making the code robust, easier to follow
and copy/paste safe.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by : Inki Dae <inki.dae@samsung.com>
Use common helper for checking the contiguity of the imported dma-buf.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by : Inki Dae <inki.dae@samsung.com>
The Documentation/DMA-API-HOWTO.txt states that the dma_map_sg() function
returns the number of the created entries in the DMA address space.
However the subsequent calls to the dma_sync_sg_for_{device,cpu}() and
dma_unmap_sg must be called with the original number of the entries
passed to the dma_map_sg().
struct sg_table is a common structure used for describing a non-contiguous
memory buffer, used commonly in the DRM and graphics subsystems. It
consists of a scatterlist with memory pages and DMA addresses (sgl entry),
as well as the number of scatterlist entries: CPU pages (orig_nents entry)
and DMA mapped pages (nents entry).
It turned out that it was a common mistake to misuse nents and orig_nents
entries, calling DMA-mapping functions with a wrong number of entries or
ignoring the number of mapped entries returned by the dma_map_sg()
function.
To avoid such issues, lets use a common dma-mapping wrappers operating
directly on the struct sg_table objects and use scatterlist page
iterators where possible. This, almost always, hides references to the
nents and orig_nents entries, making the code robust, easier to follow
and copy/paste safe.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
The Documentation/DMA-API-HOWTO.txt states that the dma_map_sg() function
returns the number of the created entries in the DMA address space.
However the subsequent calls to the dma_sync_sg_for_{device,cpu}() and
dma_unmap_sg must be called with the original number of the entries
passed to the dma_map_sg().
struct sg_table is a common structure used for describing a non-contiguous
memory buffer, used commonly in the DRM and graphics subsystems. It
consists of a scatterlist with memory pages and DMA addresses (sgl entry),
as well as the number of scatterlist entries: CPU pages (orig_nents entry)
and DMA mapped pages (nents entry).
It turned out that it was a common mistake to misuse nents and orig_nents
entries, calling DMA-mapping functions with a wrong number of entries or
ignoring the number of mapped entries returned by the dma_map_sg()
function.
To avoid such issues, lets use a common dma-mapping wrappers operating
directly on the struct sg_table objects and use scatterlist page
iterators where possible. This, almost always, hides references to the
nents and orig_nents entries, making the code robust, easier to follow
and copy/paste safe.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
The Documentation/DMA-API-HOWTO.txt states that the dma_map_sg() function
returns the number of the created entries in the DMA address space.
However the subsequent calls to the dma_sync_sg_for_{device,cpu}() and
dma_unmap_sg must be called with the original number of the entries
passed to the dma_map_sg().
struct sg_table is a common structure used for describing a non-contiguous
memory buffer, used commonly in the DRM and graphics subsystems. It
consists of a scatterlist with memory pages and DMA addresses (sgl entry),
as well as the number of scatterlist entries: CPU pages (orig_nents entry)
and DMA mapped pages (nents entry).
It turned out that it was a common mistake to misuse nents and orig_nents
entries, calling DMA-mapping functions with a wrong number of entries or
ignoring the number of mapped entries returned by the dma_map_sg()
function.
To avoid such issues, lets use a common dma-mapping wrappers operating
directly on the struct sg_table objects and use scatterlist page
iterators where possible. This, almost always, hides references to the
nents and orig_nents entries, making the code robust, easier to follow
and copy/paste safe.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Replace the current hand-crafted code for extracting pages and DMA
addresses from the given scatterlist by the much more robust
code based on the generic scatterlist iterators and recently
introduced sg_table-based wrappers. The resulting code is simple and
easy to understand, so the comment describing the old code is no
longer needed.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
It is a common operation done by DRM drivers to check the contiguity
of the DMA-mapped buffer described by a scatterlist in the
sg_table object. Let's add a common helper for this operation.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Although GVT doesn't support guest GuC, MIA core is still expected
to be GS_MIA_IN_RESET after uc HW reset.
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200819010900.54598-1-colin.xu@intel.com
Without F_CMD_ACCESS, guest LRI cmd will fail due to "access to
non-render register" when init below WAs:
WaDisableDynamicCreditSharing: GAMT_CHKN_BIT_REG
WaCompressedResourceSamplerPbeMediaNewHashMode: MMCD_MISC_CTRL
So add F_CMD_ACCESS to the two MMIO.
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200819010801.53411-1-colin.xu@intel.com
some registers cannot be cmd accessible. remove them from the list
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Wang Zhi <zhi.a.wang@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200811072720.3525-1-yan.y.zhao@intel.com
flag F_CMD_ACCESS represents whether an MMIO is able to be accessed by
GPU commands.
In this patch,
1. add interface to set this flag
2. rename intel_gvt_mmio_is_cmd_access() to
intel_gvt_mmio_is_cmd_accessible() and update its description message.
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200811070233.3387-1-yan.y.zhao@intel.com
F_IN_CTX is an inaccurate flag name, because people may wrongly think all
MMIOs in context image are with this flag. But actually, this flag is only
for MMIOs both in GVT's save-restore list and in hardare logical
context's image.
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200811060944.3039-1-yan.y.zhao@intel.com
This reduces the spam in dmesg when we start hitting the shrinker, and
replaces it with something we can put on a timeline while profiling or
debugging system issues.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Technically the GMU specific one is a bit redundant, but it was useful
to track down a bug.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
This function is called quite often if you have a blinking cursor on the
screen, hello page flip. Let's drop this debug print here because it
means enabling the print via the module parameter starts to spam the
debug console.
Cc: Abhinav Kumar <abhinavk@codeaurora.org>
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: Sean Paul <seanpaul@chromium.org>
Fixes: 25fdd5933e ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The cstate->num_mixers member is only set to a non-zero value once
dpu_encoder_virt_mode_set() is called, but the atomic check function can
be called by userspace before that. Let's avoid the div-by-zero here and
inside _dpu_crtc_setup_lm_bounds() by skipping this part of the atomic
check if dpu_encoder_virt_mode_set() hasn't been called yet. This fixes
an UBSAN warning:
UBSAN: Undefined behaviour in drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c:860:31
division by zero
CPU: 7 PID: 409 Comm: frecon Tainted: G S 5.4.31 #128
Hardware name: Google Trogdor (rev0) (DT)
Call trace:
dump_backtrace+0x0/0x14c
show_stack+0x20/0x2c
dump_stack+0xa0/0xd8
__ubsan_handle_divrem_overflow+0xec/0x110
dpu_crtc_atomic_check+0x97c/0x9d4
drm_atomic_helper_check_planes+0x160/0x1c8
drm_atomic_helper_check+0x54/0xbc
drm_atomic_check_only+0x6a8/0x880
drm_atomic_commit+0x20/0x5c
drm_atomic_helper_set_config+0x98/0xa0
drm_mode_setcrtc+0x308/0x5dc
drm_ioctl_kernel+0x9c/0x114
drm_ioctl+0x2ac/0x4b0
drm_compat_ioctl+0xe8/0x13c
__arm64_compat_sys_ioctl+0x184/0x324
el0_svc_common+0xa4/0x154
el0_svc_compat_handler+0x
Cc: Abhinav Kumar <abhinavk@codeaurora.org>
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: Sean Paul <seanpaul@chromium.org>
Fixes: 25fdd5933e ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
We could get a vblank event racing with the current atomic commit,
resulting in sending the pageflip event to userspace early, causing
tearing. On the other hand, complete_commit() ensures that the
pending flush is complete.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
card->owner is a required property and since commit 81033c6b58 ("ALSA:
core: Warn on empty module") a warning is issued if it is empty. Fix lack
of it. This fixes following warning observed on RaspberryPi 3B board
with ARM 32bit kernel and multi_v7_defconfig:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 210 at sound/core/init.c:207 snd_card_new+0x378/0x398 [snd]
Modules linked in: vc4(+) snd_soc_core ac97_bus snd_pcm_dmaengine bluetooth snd_pcm snd_timer crc32_arm_ce raspberrypi_hwmon snd soundcore ecdh_generic ecc bcm2835_thermal phy_generic
CPU: 1 PID: 210 Comm: systemd-udevd Not tainted 5.8.0-rc1-00027-g81033c6b584b #1087
Hardware name: BCM2835
[<c03113c0>] (unwind_backtrace) from [<c030bcb4>] (show_stack+0x10/0x14)
[<c030bcb4>] (show_stack) from [<c071cef8>] (dump_stack+0xd4/0xe8)
[<c071cef8>] (dump_stack) from [<c0345bfc>] (__warn+0xdc/0xf4)
[<c0345bfc>] (__warn) from [<c0345cc4>] (warn_slowpath_fmt+0xb0/0xb8)
[<c0345cc4>] (warn_slowpath_fmt) from [<bf02ff74>] (snd_card_new+0x378/0x398 [snd])
[<bf02ff74>] (snd_card_new [snd]) from [<bf11f0b4>] (snd_soc_bind_card+0x280/0x99c [snd_soc_core])
[<bf11f0b4>] (snd_soc_bind_card [snd_soc_core]) from [<bf12f000>] (devm_snd_soc_register_card+0x34/0x6c [snd_soc_core])
[<bf12f000>] (devm_snd_soc_register_card [snd_soc_core]) from [<bf165654>] (vc4_hdmi_bind+0x43c/0x5f4 [vc4])
[<bf165654>] (vc4_hdmi_bind [vc4]) from [<c09d660c>] (component_bind_all+0xec/0x24c)
[<c09d660c>] (component_bind_all) from [<bf15c44c>] (vc4_drm_bind+0xd4/0x174 [vc4])
[<bf15c44c>] (vc4_drm_bind [vc4]) from [<c09d6ac0>] (try_to_bring_up_master+0x160/0x1b0)
[<c09d6ac0>] (try_to_bring_up_master) from [<c09d6f38>] (component_master_add_with_match+0xd0/0x104)
[<c09d6f38>] (component_master_add_with_match) from [<bf15c588>] (vc4_platform_drm_probe+0x9c/0xbc [vc4])
[<bf15c588>] (vc4_platform_drm_probe [vc4]) from [<c09df740>] (platform_drv_probe+0x6c/0xa4)
[<c09df740>] (platform_drv_probe) from [<c09dd6f0>] (really_probe+0x210/0x350)
[<c09dd6f0>] (really_probe) from [<c09dd940>] (driver_probe_device+0x5c/0xb4)
[<c09dd940>] (driver_probe_device) from [<c09ddb38>] (device_driver_attach+0x58/0x60)
[<c09ddb38>] (device_driver_attach) from [<c09ddbc0>] (__driver_attach+0x80/0xbc)
[<c09ddbc0>] (__driver_attach) from [<c09db820>] (bus_for_each_dev+0x68/0xb4)
[<c09db820>] (bus_for_each_dev) from [<c09dc9f8>] (bus_add_driver+0x130/0x1e8)
[<c09dc9f8>] (bus_add_driver) from [<c09de648>] (driver_register+0x78/0x110)
[<c09de648>] (driver_register) from [<c0302038>] (do_one_initcall+0x50/0x220)
[<c0302038>] (do_one_initcall) from [<c03db544>] (do_init_module+0x60/0x210)
[<c03db544>] (do_init_module) from [<c03da4f8>] (load_module+0x1e34/0x2338)
[<c03da4f8>] (load_module) from [<c03dac00>] (sys_finit_module+0xac/0xbc)
[<c03dac00>] (sys_finit_module) from [<c03000c0>] (ret_fast_syscall+0x0/0x54)
Exception stack(0xeded9fa8 to 0xeded9ff0)
...
---[ end trace 6414689569c2bc08 ]---
Fixes: bb7d785688 ("drm/vc4: Add HDMI audio support")
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701073949.28941-1-m.szyprowski@samsung.com
This adds initial support for iMX8MQ's Display Controller Subsystem (DCSS).
Some of its capabilities include:
* 4K@60fps;
* HDR10;
* one graphics and 2 video pipelines;
* on-the-fly decompression of compressed video and graphics;
The reference manual can be found here:
https://www.nxp.com/webapp/Download?colCode=IMX8MDQLQRM
The current patch adds only basic functionality: one primary plane for
graphics, linear, tiled and super-tiled buffers support (no graphics
decompression yet), no HDR10 and no video planes.
Video planes support and HDR10 will be added in subsequent patches once
per-plane de-gamma/CSC/gamma support is in.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200731081836.3048-3-laurentiu.palcu@oss.nxp.com
Currently the drm/imx/ directory is compiled only if DRM_IMX is set. Adding a
new IMX related IP in the same directory would need DRM_IMX to be set, which would
bring in also IPUv3 core driver...
The current patch would allow adding new IPs in the imx/ directory without needing
to set DRM_IMX.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200731081836.3048-2-laurentiu.palcu@oss.nxp.com
Add drm_device argument to drm_prime_pages_to_sg(), so we can
call dma_max_mapping_size() to figure the segment size limit
and call into __sg_alloc_table_from_pages() with the correct
limit.
This fixes virtio-gpu with sev. Possibly it'll fix other bugs
too given that drm seems to totaly ignore segment size limits
so far ...
v2: place max_segment in drm driver not gem object.
v3: move max_segment next to the other gem fields.
v4: just use dma_max_mapping_size().
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20200907112425.15610-2-kraxel@redhat.com
UAPI Changes:
None
Cross-subsystem Changes:
* Moves a bunch of miscellaneous DP code from the i915 driver into a set
of shared DRM DP helpers
Core Changes:
* New DRM DP helpers (see above)
Driver Changes:
* Implements usage of the aforementioned DP helpers in the nouveau
driver, along with some other various HPD related cleanup for nouveau
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/11e59ebdea7ee4f46803a21fe9b21443d2b9c401.camel@redhat.com
Since the agp bind/unbind/destroy are now getting called from drivers
rather than via the func table, drop the bdev parameter.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200907204630.1406528-13-airlied@gmail.com
This pattern is cut-n-pasted across 4 drivers, switch it to
a WARN_ON instead, as BUG_ON is considered a bad idea usually.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200907204630.1406528-2-airlied@gmail.com
(Same content as drm-intel-gt-next-2020-09-04-3, S-o-b's added)
UAPI Changes:
(- Potential implicit changes from WW locking refactoring)
Cross-subsystem Changes:
(- WW locking changes should align the i915 locking more with others)
Driver Changes:
- MAJOR: Apply WW locking across the driver (Maarten)
- Reverts for 5 commits to make applying WW locking faster (Maarten)
- Disable preparser around invalidations on Tigerlake for non-RCS engines (Chris)
- Add missing dma_fence_put() for error case of syncobj timeline (Chris)
- Parse command buffer earlier in eb_relocate(slow) to facilitate backoff (Maarten)
- Pin engine before pinning all objects (Maarten)
- Rework intel_context pinning to do everything outside of pin_mutex (Maarten)
- Avoid tracking GEM context until registered (Cc: stable, Chris)
- Provide a fastpath for waiting on vma bindings (Chris)
- Fixes to preempt-to-busy mechanism (Chris)
- Distinguish the virtual breadcrumbs from the irq breadcrumbs (Chris)
- Switch to object allocations for page directories (Chris)
- Hold context/request reference while breadcrumbs are active (Chris)
- Make sure execbuffer always passes ww state to i915_vma_pin (Maarten)
- Code refactoring to facilitate use of WW locking (Maarten)
- Locking refactoring to use more granular locking (Maarten, Chris)
- Support for multiple pinned timelines per engine (Chris)
- Move complication of I915_GEM_THROTTLE to the ioctl from general code (Chris)
- Make active tracking/vma page-directory stash work preallocated (Chris)
- Avoid flushing submission tasklet too often (Chris)
- Reduce context termination list iteration guard to RCU (Chris)
- Reductions to locking contention (Chris)
- Fixes for issues found by CI (Chris)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <jlahtine@jlahtine-mobl.ger.corp.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200907130039.GA27766@jlahtine-mobl.ger.corp.intel.com
Commit '6f6a73c8b715d595977774d48450a734297ab21f' from Linus' tree
The fixes reverts cause a bit of a conflict pain with intel next,
start fixing it up here.
Signed-off-by: Dave Airlie <airlied@redhat.com>
In commit 4f0b4352bd ("drm/i915: Extract cdclk requirements checking
to separate function") the order of force_min_cdclk_changed check and
intel_modeset_checks(), was reversed. This broke the mechanism to
immediately force a new CDCLK minimum, and lead to driver probe
errors for display audio on GLK platform with 5.9-rc1 kernel. Fix
the issue by moving intel_modeset_checks() call later.
[vsyrjala: It also broke the ability of planes to bump up the cdclk
and thus could lead to underruns when eg. flipping from 32bpp to
64bpp framebuffer. To be clear, we still compute the new cdclk
correctly but fail to actually program it to the hardware due to
intel_set_cdclk_{pre,post}_plane_update() not getting called on
account of state->modeset==false.]
Fixes: 4f0b4352bd ("drm/i915: Extract cdclk requirements checking to separate function")
BugLink: https://github.com/thesofproject/linux/issues/2410
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200901151036.1312357-1-kai.vehmanen@linux.intel.com
(cherry picked from commit cf696856bc)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
This is used by TTM to communicate the physical address
which should be used with ioremap(), ioremap_wc(). We don't
need to separate the base and offset in any way here.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/389457/
This is internal to TTM and should not be used by drivers directly.
Drop the call to qxl_ttm_io_mem_reserve() and use mem->start instead.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/389456/
This fixes the following warnings while building in W=1 :
dw-mipi-dsi.c:1002:5: warning: no previous prototype for 'dw_mipi_dsi_debugfs_write' [-Wmissing-prototypes]
dw-mipi-dsi.c:1027:5: warning: no previous prototype for 'dw_mipi_dsi_debugfs_show' [-Wmissing-prototypes]
Fixes: e2435d6920 ("drm/bridge: dw-mipi-dsi.c: Add VPG runtime config through debugfs")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Angelo Ribeiro <angelo.ribeiro@synopsys.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200907102711.23748-1-narmstrong@baylibre.com
These commits caused a regression on Lenovo t520 sandybridge
machine belonging to reporter. We are reverting them for 5.10
for other reasons, so just do it for 5.9 as well.
This reverts commit 7ac2d2536d.
Reported-by: Harald Arnesen <harald@skogtun.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
These commits caused a regression on Lenovo t520 sandybridge
machine belonging to reporter. We are reverting them for 5.10
for other reasons, so just do it for 5.9 as well.
This reverts commit 9e0f9464e2.
Reported-by: Harald Arnesen <harald@skogtun.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
These commits caused a regression on Lenovo t520 sandybridge
machine belonging to reporter. We are reverting them for 5.10
for other reasons, so just do it for 5.9 as well.
This reverts commit 763fedd6a2.
Reported-by: Harald Arnesen <harald@skogtun.org>
Signed-off-by: Dave Airlie <airied@redhat.com>
A few fixes for a potential RPTR corruption issue.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <CAF6AEGvnr6Nhz2J0sjv2G+j7iceVtaDiJDT8T88uW6jiBfOGKQ@mail.gmail.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl9VerweHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGhc4H/iHD6qLdB36gZB6K
oc2nJyrqyWitv4ti2Mnt5PA7o4wX4l6nnr1QvoaJ4BRs5Ja1czRvb2XDmdzqAoIA
xITGoafqaAeDfxQ91bWrJsVN0pCRKiGwddXlU7TWmqw/riAkfOqi6GYKvav4biJH
+n1mUPQb1M2IbRFsqkAS+ebKHq3CWaRvzKOEneS88nGlL5u31S9NAru8Ru/fkxRn
6CwGcs1XRaBPYaZAhdfIb0NuatUlpkhPC9yhNS9up6SqrWmK3m65vmFVng6H0eCF
fwn1jVztboY/XcNAi5sM9ExpQCql6WLQEEktVikqRDojC8fVtSx6W55tPt7qeaoO
Z6t4/DA=
=bcA4
-----END PGP SIGNATURE-----
Merge tag 'v5.9-rc4' into drm-next
Backmerge 5.9-rc4 as there is a nasty qxl conflict
that needs to be resolved.
Signed-off-by: Dave Airlie <airlied@redhat.com>
This patch implements the necessary functions to add writeback support
for vkms. This feature is useful for testing compositors if you don't
have hardware with writeback support.
Change in V4 (Emil and Melissa):
- Move signal completion above drm_crtc_add_crc_entry()
- Make writeback always available
- Use appropriate namespace
- Drop fb check in vkms_wb_atomic_commit
- Make vkms_set_composer visible for writeback code
- Enable composer operation on prepare_job and disable it on cleanup_job
- Drop extra space at the end of the file
- Rebase
Change in V3 (Daniel):
- If writeback is enabled, compose everything into the writeback buffer
instead of CRC private buffer
- Guarantees that the CRC will match exactly what we have in the
writeback buffer.
Change in V2:
- Rework signal completion (Brian)
- Integrates writeback with active_planes (Daniel)
- Compose cursor (Daniel)
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200830142000.146706-4-rodrigosiqueiramelo@gmail.com
This commit decouples pixel manipulation from compute_crc() for avoiding
any pixel change during the CRC calculation. This commits represents a
preparation work for making VKMS able to support the writeback feature.
Change in V5 (Melissa):
- Rebase and drop bitmap for alpha
Change in V4 (Emil):
- Move bitmap_clear operation and comments to get_pixel function
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Reviewed-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200830142000.146706-3-rodrigosiqueiramelo@gmail.com
In the vkms_composer.c, some of the functions related to CRC and compose
have interdependence between each other. This patch reworks some
functions inside vkms_composer to make crc and composer computation
decoupled.
This patch is preparation work for making vkms able to support new
features.
Tested-by: Melissa Wen <melissa.srw@gmail.com>
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Reviewed-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200830142000.146706-2-rodrigosiqueiramelo@gmail.com
The BCM2711 has a reworked display pipeline, and the load tracker needs
some adjustment to operate properly. Let's add a compatible for BCM2711
and disable the load tracker until properly supported.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/beac4f9ef0261bca731a0402c8354e9af740519c.1599120059.git-series.maxime@cerno.tech
In order to avoid pixels getting stuck in an unflushable FIFO, we need when
we disable the HDMI controller to switch away from getting our pixels from
the pixelvalve and instead use blank pixels, and switch back to the
pixelvalve when we enable the HDMI controller.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fde3efb1ad79f4476a73d310cbba3ec07dc6dabe.1599120059.git-series.maxime@cerno.tech
The VID_CTL setup is done in several places in the driver even though it's
not really required. Let's simplify it a bit to do the configuration in one
go.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/08e7ebb605a560fcc149b69b4af52753a7870b2f.1599120059.git-series.maxime@cerno.tech
In order to prevent some pixels getting stuck in an unflushable FIFO on
bcm2711, we need to enable the HVS, the pixelvalve (the CRTC) and the HDMI
controller (the encoder) in an intertwined way, and with tight delays.
However, the atomic callbacks don't really provide a way to work with
either constraints, so we need to roll our own callbacks so that we can
provide those guarantees.
Since those callbacks have been implemented and called in the CRTC code, we
can just implement them in the HDMI driver now.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2e9226d971117065f3b97e597f04f7fe2f0c134c.1599120059.git-series.maxime@cerno.tech
In order to avoid a pixel getting stuck in an unflushable FIFO, we need to
recenter the FIFO every time we're doing a modeset and not only if we're
connected to an HDMI monitor.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b3faaf05ac6c4d3c364d28fa441571eb85903269.1599120059.git-series.maxime@cerno.tech
The current code has some logic, disabled by default, to dump the register
setup in the HDMI controller.
However, since we're going to split those functions in multiple, shorter,
functions that only make sense where they are called in sequence, keeping
the register dump makes little sense.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c8c8d388f2d32fc3536336be36d003a862487eb7.1599120059.git-series.maxime@cerno.tech
The HDMI driver was registering a single ALSA card so far with the name
vc4-hdmi.
Obviously, this is not going to work anymore when we will have multiple
HDMI controllers since we will end up trying to register two files with the
same name.
Let's use the variant to avoid that name conflict.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e60a37444e848a384a45707a21d6df8883115f86.1599120059.git-series.maxime@cerno.tech
The audio configuration has changed for the BCM2711, with notably a
different parent clock and a different channel configuration.
Make that modular to be able to support the BCM2711.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://patchwork.freedesktop.org/patch/msgid/85a8ca721c2d800be758c55870cea98536749680.1599120059.git-series.maxime@cerno.tech
ALSA's iec958 plugin by default sets the block start preamble
to 8, whilst this driver was programming the hardware to expect
0xF.
Amend the hardware config to match ALSA.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d0b126deb228baf1244c91e02ac0a8f7c9c60dc5.1599120059.git-series.maxime@cerno.tech
If the encoder is disabled and re-enabled (eg mode change) all infoframes
are reset, whilst the audio subsystem know nothing about this change.
The driver therefore needs to reinstate the audio infoframe for
itself.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://patchwork.freedesktop.org/patch/msgid/cd579ccc2c9b9d2fce0ebaf32f847cedb0e4a7a2.1599120059.git-series.maxime@cerno.tech
The register range used for audio setup in the previous generations of
SoC were always the second range in the device tree. However, now that
the BCM2711 has way more register ranges, it makes sense to retrieve it
by names for it, while preserving the id-based lookup as a fallback.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a1ba5605fe1006a1ead5262ef3d66ea5d0750381.1599120059.git-series.maxime@cerno.tech
The HSM clock needs to be running at 101% the pixel clock of the HDMI
controller, however it's shared between the two HDMI controllers, which
means that if the resolutions are different between the two HDMI
controllers, and the lowest resolution is on the second (in enable order)
controller, the first HDMI controller will end up with a smaller than
expected clock rate.
Since we don't really need an exact frequency there, we can simply change
the minimum rate we expect instead.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/821992209cc0d7a83254bf26fe2bf507ef0994d2.1599120059.git-series.maxime@cerno.tech
The HSM clock needs to be setup at around 101% of the pixel rate. This
was done previously by setting the clock rate to 163.7MHz at probe time and
only check in mode_valid whether the mode pixel clock was under the pixel
clock +1% or not.
However, with 4k we need to change that frequency to a higher frequency
than 163.7MHz, and yet want to have the lowest clock as possible to have a
decent power saving.
Let's change that logic a bit by setting the clock rate of the HSM clock
to the pixel rate at encoder_enable time. This would work for the
BCM2711 that support 4k resolutions and has a clock that can provide it,
but we still have to take care of a 4k panel plugged on a BCM283x SoCs
that wouldn't be able to use those modes, so let's define the limit in
the variant.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7e692ddc231d33dd671e70ea04dd1dcf56c1ecb3.1599120059.git-series.maxime@cerno.tech
The mode_valid hook on the encoder uses a pointer to a drm_encoder called
crtc, which is pretty confusing. Let's rename it to encoder to make it
clear what it is.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7fbabab03992efe4a3a3640ac5ee2bb49b1c7338.1599120059.git-series.maxime@cerno.tech
Similarly to the audio support, CEC support is not there yet for the
BCM2711, so let's skip entirely the CEC initialization through a variant
flag.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bd0c4afa83b4e121692352cdc2dd1886162c7552.1599120059.git-series.maxime@cerno.tech
The CEC init code was put directly into the bind function, which was quite
inconsistent with how the audio support was done, and would prevent us from
further changes to skip that initialisation entirely.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/21f4717e076291522d0784a7fd3774d8e97eaf01.1599120059.git-series.maxime@cerno.tech
The HDMI driver was registering a single debugfs file so far with the name
hdmi_regs.
Obviously, this is not going to work anymore when will have multiple HDMI
controllers since we will end up trying to register two files with the same
name.
Let's use the variant to avoid that name conflict.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9505c1eb40b3ef3709277bf9e8af77917b249c32.1599120059.git-series.maxime@cerno.tech
The vc4 CRTC will use the encoder type to control its output clock
muxing. However, this will be different from HDMI0 to HDMI1, so let's
store our type in the variant structure so that we can support multiple
controllers later on.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2736a86b498551ba9dbc5803c5bb910627a2550c.1599120059.git-series.maxime@cerno.tech
Similarly to the previous patches, the timings setup in the HDMI controller
of the BCM2711 is slightly different, mostly because it supports higher
resolutions and thus needed more spaces for the various timings, resulting
in the register layout changing.
Let's add a callback for that as well.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0cfcbb379212f90b4abc76c0ccf3b90d1d7c0268.1599120059.git-series.maxime@cerno.tech
Similarly to the previous patches, the CSC setup is slightly different in
the BCM2711 than in the previous generations. Let's add a callback for it.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5c19bbf10153cb42ca0fb67e08606c8295c17236.1599120059.git-series.maxime@cerno.tech
The HDMI PHY in the BCM2711 HDMI controller is significantly more
complicated to setup than in the older BCM283x SoCs.
Let's add hooks to enable and disable the PHY.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7216826284dbc60a58bdacd662805d20699e5c80.1599120059.git-series.maxime@cerno.tech
The BCM2711 and BCM283x HDMI controllers use a slightly different reset
sequence, so let's add a callback to reset the controller.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a34bcb493da07eae58ed704f65e72ce0748e8952.1599120059.git-series.maxime@cerno.tech
The HDMI controllers found in the BCM2711 have most of the registers
reorganized in multiple registers areas and at different offsets than
previously found.
The logic however remains pretty much the same, so it doesn't really make
sense to create a whole new driver and we should share the code as much as
possible.
Let's implement some indirection to wrap around a register and depending on
the variant will lookup the associated register on that particular variant.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3070236daff920e7edd11c5a72ac31fd0f6a656b.1599120059.git-series.maxime@cerno.tech
The HDMI controllers found in the BCM2711 has a pretty different clock and
registers areas than found in the older BCM283x SoCs.
Let's create a variant structure to store the various adjustments we'll
need later on, and a function to get the resources needed for one
particular version.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/71cfa3ce3d865bbab52a0e5651bc052dc4893f11.1599120059.git-series.maxime@cerno.tech
The vc4_hdmi_connector was only used to switch between drm_connector to
drm_encoder. However, we can now use vc4_hdmi to do the switch, so that
structure is redundant.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/aee5120728db350b19c074de4290eafaf01e6671.1599120059.git-series.maxime@cerno.tech
The unbind function needs to retrieve a vc4_hdmi structure pointer through
the struct device that we're given since we want to support multiple HDMI
controllers.
However, our optional ASoC support doesn't make that trivial since it will
overwrite the device drvdata if we use it, but obviously won't if we don't
use it.
Let's make sure the fields are at the proper offset to be able to cast
between the snd_soc_card structure and the vc4_hdmi structure
transparently so we can support both cases.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/717082cba06b5c06280f26c56c08aee512365ed3.1599120059.git-series.maxime@cerno.tech
Our CEC code also retrieves the associated vc4_hdmi by setting the
vc4_dev pointer as its private data, and then dereferences its vc4_hdmi
pointer.
In order to eventually get rid of that pointer, we can simply pass the
vc4_hdmi pointer directly.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/cb575cb9e13018bce131b8535e5b572dc1027877.1599120059.git-series.maxime@cerno.tech
Whenever the code needs to access the vc4_hdmi structure from a DRM
connector or encoder, it first accesses the drm_device associated to the
connector, then retrieve the drm_dev private data which gives it a
pointer to our vc4_dev, and will finally follow the vc4_hdmi pointer in
that structure.
That will also give us some trouble when having multiple controllers,
but now that we have our encoder and connector structures that are part
of vc4_hdmi, we can simply call container_of on the DRM connector or
encoder and retrieve the vc4_hdmi structure directly.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/536ecce5898ea75839fa3788b876009d69a5ccae.1599120059.git-series.maxime@cerno.tech
The function vc4_hdmi_connector_detect access its vc4_hdmi struct by
dereferencing the pointer in the structure vc4_dev. This will cause some
issues when we will have multiple HDMI controllers, so let's just use the
local variable for now instead of dereferencing that pointer all the time,
and we'll fix the local variable later.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/ef92c5582d3b2894128b2272a8ada7cbc20be3d9.1599120059.git-series.maxime@cerno.tech
The current driver only supports a single HDMI controller, and part of
the issue is that the main vc4_dev structure holds a pointer to its
(only) HDMI controller, and the HDMI registers accessors will use it to
retrieve the mapped addresses.
Let's modify those accessors to use directly the vc4_hdmi structure so
that we can eventually get rid of that single global pointer.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/886b955586264ce078d7d35e9b8ef9ae51675c27.1599120059.git-series.maxime@cerno.tech
The driver isn't consistent with the name given to the vc4_hdmi
structure pointer in its functions. Make sure to use a consistent name.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/696be840dc427245afe94b43e0b829c728d948a7.1599120059.git-series.maxime@cerno.tech
Now that we are passing the vc4_hdmi structure to the connector init
function, we can simply use the pointer in that structure instead of
having the pointer as an argument.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/4fe1b45fe45e4ba57d40154da010807d4e5db86c.1599120059.git-series.maxime@cerno.tech
the vc4_hdmi driver has some custom structures to hold the data it needs to
associate with the drm_encoder and drm_connector structures.
However, it allocates them separately from the vc4_hdmi structure which
makes it more complicated than it needs to be.
Move those structures to be contained by vc4_hdmi and update the code
accordingly.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/93b418d63c876355af2b3d3afebe31a256268623.1599120059.git-series.maxime@cerno.tech
We're calling vc4_debugfs_add_file with our struct vc4_hdmi pointer set
in the private field, but we don't use that field and go through the
main struct vc4_dev to get it.
Let's use the private field directly, that will save us some trouble
later on.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/24028dc06c379dbc71f98e027cce2839fdd446ce.1599120059.git-series.maxime@cerno.tech
In order to prevent issues during the firmware to KMS transition, we need
to make sure the pixelvalve are disabled at boot time so that the DRM state
matches the hardware state.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/ad57f1bdeae7a99631713b0fc193c86f223de042.1599120059.git-series.maxime@cerno.tech
At boot time, if we detect that a pixelvalve has been enabled, we need to
be able to retrieve the HVS channel it has been assigned to so that we can
disable that channel too. Let's create that function that returns the FIFO
or an error from a given output.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/178192d90874559b8386139f2226e773347729fc.1599120059.git-series.maxime@cerno.tech
During the transition from the firmware to the KMS driver, we need to pay
particular attention to how we deal with the pixelvalves that have already
been enabled, otherwise either timeouts or stuck pixels can occur. We'll
thus need to call the function to stop an HVS channel at boot.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/a9d5f0891c3bc1deb6b16d56ca6994ed912ec7c7.1599120059.git-series.maxime@cerno.tech
Even though it's not really clear why we need to flush the PV FIFO during
the configuration even though we started by flushing it, experience shows
that without it we get a stale pixel stuck in the FIFO between the HVS and
the PV.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ccd6269ba37b2f849ba6e62471c99bd93a4548a0.1599120059.git-series.maxime@cerno.tech
In order to avoid a stale pixel getting stuck on mode change or a disable
/ enable cycle, we need to make sure to flush the PV FIFO on disable.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/26fe48b09d77088679ed0c8cb8cf0db2f108195e.1599120059.git-series.maxime@cerno.tech
In order to avoid pixels getting stuck in the (unflushable) FIFO between
the HVS and the PV, we need to add some delay after disabling the PV output
and before disabling the HDMI controller. 20ms seems to be good enough so
let's use that.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/15cf215bd2ceebd203c4010c09c21a4019c650ed.1599120059.git-series.maxime@cerno.tech
In the BCM2711, the setup of the HVS, pixelvalve and HDMI controller
requires very precise ordering and timing that the regular atomic callbacks
don't provide. Let's add new callbacks on top of the regular ones to be
able to split the configuration as needed.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1dd78efe8f29add73c97d0148cfd4ec8e34aaf22.1599120059.git-series.maxime@cerno.tech
In order to avoid stale pixels getting stuck in an intermediate FIFO
between the HVS and the pixelvalve on BCM2711, we need to configure the HVS
channel before the pixelvalve is reset and configured.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9d7c5a03bc1a1e6d50f7b617cc2d8a46a4bbb7bc.1599120059.git-series.maxime@cerno.tech
Since we moved the pixelvalve configuration to atomic_enable, we're now
first calling the function that resets the pixelvalve and then the one that
configures it.
However, the first thing the latter is doing is calling the reset function,
meaning that we reset twice our pixelvalve. Let's remove the first call.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a0a31af0d4a7a070de979f0e5b618d9e2c730e7f.1599120059.git-series.maxime@cerno.tech
On BCM2711 to avoid stale pixels getting stuck in intermediate FIFOs, the
pixelvalve needs to be setup each time there's a mode change or enable /
disable sequence.
Therefore, we can't really use mode_set_nofb anymore to configure it, but
we need to move it to atomic_enable.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f86c7a6946f98262f1cf59a461596a796d4bcc5f.1599120059.git-series.maxime@cerno.tech
In order to clear our intermediate FIFOs that might end up with a stale
pixel, let's make sure our FIFO channel is reset every time our channel is
setup.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b34c562b36177c758dd2e9d84bceb07689bfbe05.1599120059.git-series.maxime@cerno.tech
Since most of the HVS channel is setup in the init function, let's move the
gamma setup there too. As this makes the HVS mode_set function empty, let's
remove it in the process.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d439da8f1592a450a6ad35ab1f9e77def17c7965.1599120059.git-series.maxime@cerno.tech
Now that we only configure the PixelValve in vc4_crtc_config_pv, it doesn't
really make much sense to dump its register content in its caller.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c195af7d9e140a2a6db32992ee7e54071c6f94ba.1599120059.git-series.maxime@cerno.tech
The driver resets the pixelvalve FIFO in a number of occurences without
always using the same sequence.
Since this will be critical for BCM2711, let's move that sequence to a
function so that we are consistent.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/fb31003a9eee02c4b949556299ff41f0a113499a.1599120059.git-series.maxime@cerno.tech
The previous generations were only supporting a single HDMI controller, but
that's about to change, so put an index as well to differentiate between
the two controllers.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/84e11e4793aaa30d6e5c56e305d22404ac5a932d.1599120059.git-series.maxime@cerno.tech
The longer FIFOs in vc5 pixelvalves means that the FIFO full level
doesn't fit in the original register field and that we also have a
secondary field. In order to prepare for this, let's move the registers
fill part to a helper function.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/e46a3823128af50c1c833de8fa9b95e9b86c2f66.1599120059.git-series.maxime@cerno.tech
Not all pixelvalve FIFOs in vc5 have the same depth, so we need to add that
to our vc4_crtc_data structure to be able to compute the fill level
properly later on.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/7df3549c1bea9b0a27c784dc416bb9a831e4e18f.1599120059.git-series.maxime@cerno.tech
The HVS found in the BCM2711 has 6 outputs and 3 FIFOs, with each output
being connected to a pixelvalve, and some muxing between the FIFOs and
outputs.
Any output cannot feed from any FIFO though, and they all have a bunch of
constraints.
In order to support this, let's store the possible FIFOs each output can be
assigned to in the vc4_crtc_data, and use that information at atomic_check
time to iterate over all the CRTCs enabled and assign them FIFOs.
The channel assigned is then set in the vc4_crtc_state so that the rest of
the driver can use it.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f9aba3814ef37156ff36f310118cdd3954dd3dc5.1599120059.git-series.maxime@cerno.tech
The vc4 atomic commit loop has an handrolled loop that is basically
identical to for_each_new_crtc_state, let's convert it to that helper.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a712d2b70aaee20379cfc52c2141aa2f6e2a9d5b.1599120059.git-series.maxime@cerno.tech
The VIDEN bit in the pixelvalve currently being used to enable or disable
the pixelvalve seems to not be enough in some situations, which whill end
up with the pixelvalve stalling.
In such a case, even re-enabling VIDEN doesn't bring it back and we need to
clear the FIFO. This can only be done if the pixelvalve is disabled though.
In order to overcome this, we can configure the pixelvalve during
mode_set_no_fb by calling vc4_crtc_config_pv, but only enable it in
atomic_enable and flush the FIFO there, and in atomic_disable disable the
pixelvalve again.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e97596f62f4df83424d994a23465463ac60f986e.1599120059.git-series.maxime@cerno.tech
The vc4_crtc_handle_page_flip already has a local variable holding the
value of vc4_crtc->channel, so let's use it instead.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/439c589baec72ddb89159857a2d078fdd77b02a2.1599120059.git-series.maxime@cerno.tech
In vc5, the HVS has 6 outputs and 3 FIFOs (or channels), with
pixelvalves each being assigned to a given output, but each output can
then be muxed to feed from multiple FIFOs.
Since vc4 had that entirely static, both were probably equivalent, but
since that changes, let's rename hvs_channel to hvs_output in the
vc4_crtc_data, since a pixelvalve is really connected to an output, and
not to a FIFO.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b7618bb17b1c435c5d6ce50bcde2fe9243281d02.1599120059.git-series.maxime@cerno.tech
The COB allocation depends on the HVS channel used for a given
pixelvalve.
While the channel allocation was entirely static in vc4, vc5 changes
that and at bind time, a pixelvalve can be assigned to multiple
HVS channels.
Let's prepare that rework by allocating the COB when it's actually
needed.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/484cbd4b00cfeee425295df438222258cc39a3dd.1599120059.git-series.maxime@cerno.tech
Some of the HDMI pixelvalves in vc5 output two pixels per clock cycle.
Let's put the number of pixel output per clock cycle in the CRTC data and
update the various calculations to reflect that.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/18a3bb079981ba820132b37e736a4bb371234d2e.1599120059.git-series.maxime@cerno.tech
Let's now create more planes that can be affected to all the CRTCs.
vc4 has 3 CRTCs, 1 primary and 1 cursor each, and was having 24 (8
planes per CRTC) overlays.
However, vc5 has 5 CRTCs, so keeping the same logic would put us at 50
planes which is well above the 32 planes limit imposed by DRM.
Using 16 seems like a good tradeoff between staying under 32 and yet
providing enough planes.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/b41003001541fc2bb23668c699c0369ff7983be8.1599120059.git-series.maxime@cerno.tech
The current code is using the maximum of the source line size and the
destination line size to compute the size of the LBM to allocate.
While this is simpler, it starts to be an issue with modes such as 4k with
a quite long that will consume all the available memory, so we no longer
have that luxury.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b9e091883a4f7395c5b6a4f7c6070225934293db.1599120059.git-series.maxime@cerno.tech
In order to prevent timeouts and stalls in the pipeline, the core clock
needs to be maxed at 500MHz during a modeset on the BCM2711.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/37ed9e0124c5cce005ddc8dafe821d8b0da036ff.1599120059.git-series.maxime@cerno.tech
The HVS found in the BCM2711 is slightly different from the previous
generations.
Most notably, the display list layout changes a bit, the LBM doesn't have
the same size and the formats ordering for some formats is swapped.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1d02fab3b916d639c2dc05608c117bbd8230ebe8.1599120059.git-series.maxime@cerno.tech
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl9VerweHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGhc4H/iHD6qLdB36gZB6K
oc2nJyrqyWitv4ti2Mnt5PA7o4wX4l6nnr1QvoaJ4BRs5Ja1czRvb2XDmdzqAoIA
xITGoafqaAeDfxQ91bWrJsVN0pCRKiGwddXlU7TWmqw/riAkfOqi6GYKvav4biJH
+n1mUPQb1M2IbRFsqkAS+ebKHq3CWaRvzKOEneS88nGlL5u31S9NAru8Ru/fkxRn
6CwGcs1XRaBPYaZAhdfIb0NuatUlpkhPC9yhNS9up6SqrWmK3m65vmFVng6H0eCF
fwn1jVztboY/XcNAi5sM9ExpQCql6WLQEEktVikqRDojC8fVtSx6W55tPt7qeaoO
Z6t4/DA=
=bcA4
-----END PGP SIGNATURE-----
Merge tag 'v5.9-rc4' into patchwork
Linux 5.9-rc4
* tag 'v5.9-rc4': (1001 commits)
Linux 5.9-rc4
io_uring: fix linked deferred ->files cancellation
io_uring: fix cancel of deferred reqs with ->files
include/linux/log2.h: add missing () around n in roundup_pow_of_two()
mm/khugepaged.c: fix khugepaged's request size in collapse_file
mm/hugetlb: fix a race between hugetlb sysctl handlers
mm/hugetlb: try preferred node first when alloc gigantic page from cma
mm/migrate: preserve soft dirty in remove_migration_pte()
mm/migrate: remove unnecessary is_zone_device_page() check
mm/rmap: fixup copying of soft dirty and uffd ptes
mm/migrate: fixup setting UFFD_WP flag
mm: madvise: fix vma user-after-free
checkpatch: fix the usage of capture group ( ... )
fork: adjust sysctl_max_threads definition to match prototype
ipc: adjust proc_ipc_sem_dointvec definition to match prototype
mm: track page table modifications in __apply_to_page_range()
MAINTAINERS: IA64: mark Status as Odd Fixes only
MAINTAINERS: add LLVM maintainers
MAINTAINERS: update Cavium/Marvell entries
mm: slub: fix conversion of freelist_corrupted()
...
The hwsp_gtt object is used for sub-allocation and could therefore
be shared by many contexts causing unnecessary contention during
concurrent context pinning.
However since we're currently locking it only for pinning, it remains
resident until we unpin it, and therefore it's safe to drop the
lock early, allowing for concurrent thread access.
Signed-off-by: Thomas Hellström <thomas.hellstrom@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(NOTE: This is the minimal backportable fix, a full fix is being
developed at https://patchwork.freedesktop.org/patch/388048/)
The flags passed to the wait_entry.func are passed onwards to
try_to_wake_up(), which has a very particular interpretation for its
wake_flags. In particular, beyond the published WF_SYNC, it has a few
internal flags as well. Since we passed the fence->error down the chain
via the flags argument, these ended up in the default_wake_function
confusing the kernel/sched.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2110
Fixes: ef46884975 ("drm/i915: Propagate fence errors")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: <stable@vger.kernel.org> # v5.4+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200728152144.1100-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Joonas: Rebased and reordered into drm-intel-gt-next branch]
[Joonas: Added a note and link about more complete fix]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
To implement preempt-to-busy (and so efficient timeslicing and best utilization
of the hardware submission ports) we let the GPU run asynchronously in respect
to the ELSP submission queue. This created challenges in keeping and accessing
the driver state mirroring the asynchronous GPU execution.
Previous fix 1d9221e9d3 ("drm/i915: Skip signaling a signaled request")
however did not correctly serialize request retirement with the execution
callbacks.
We were using the i915_request.lock to serialise adding an execution callback
with __i915_request_submit. However, if we use an atomic llist_add to serialise
multiple waiters and then check to see if the request is already executing, we
can remove the irq-spinlock and fix serialization between retirement and
execution callbacks in one go.
v2: Avoid using the irq_work when outside of the irq-spinlocks, where we
can execute the callbacks immediately.
v3: Pay close attention to the order of setting ACTIVE on retirement, we
need to ensure the request is signaled and breadcrumbs detached before
we finish removing the request from the engine.
v4: Expanded commit message.
Fixes: 1d9221e9d3 ("drm/i915: Skip signaling a signaled request")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716142207.13003-2-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Joonas: Rebased and reordered into drm-intel-gt-next branch]
[Joonas: Added expanded commit message from Tvrtko and Chris]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
To implement preempt-to-busy (and so efficient timeslicing and best utilization
of the hardware submission ports) we let the GPU run asynchronously in respect
to the ELSP submission queue. This created challenges in keeping and accessing
the driver state mirroring the asynchronous GPU execution.
The latest occurence of this was spotted by KCSAN:
[ 1413.563200] BUG: KCSAN: data-race in __await_execution+0x217/0x370 [i915]
[ 1413.563221]
[ 1413.563236] race at unknown origin, with read to 0xffff88885bb6c478 of 8 bytes by task 9654 on cpu 1:
[ 1413.563548] __await_execution+0x217/0x370 [i915]
[ 1413.563891] i915_request_await_dma_fence+0x4eb/0x6a0 [i915]
[ 1413.564235] i915_request_await_object+0x421/0x490 [i915]
[ 1413.564577] i915_gem_do_execbuffer+0x29b7/0x3c40 [i915]
[ 1413.564967] i915_gem_execbuffer2_ioctl+0x22f/0x5c0 [i915]
[ 1413.564998] drm_ioctl_kernel+0x156/0x1b0
[ 1413.565022] drm_ioctl+0x2ff/0x480
[ 1413.565046] __x64_sys_ioctl+0x87/0xd0
[ 1413.565069] do_syscall_64+0x4d/0x80
[ 1413.565094] entry_SYSCALL_64_after_hwframe+0x44/0xa9
To complicate matters, we have to both avoid the read tearing of *active and
avoid any write tearing as perform the pending[] -> inflight[] promotion of the
execlists.
This is because we cannot rely on the memcpy doing u64 aligned copies on all
kernels/platforms and so we opt to open-code it with explicit WRITE_ONCE
annotations to satisfy KCSAN.
v2: When in doubt, write the same comment again.
v3: Expanded commit message.
Fixes: b55230e5e8 ("drm/i915: Check for awaits on still currently executing requests")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716142207.13003-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Joonas: Rebased and reordered into drm-intel-gt-next branch]
[Joonas: Added expanded commit message from Tvrtko and Chris]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Use ww locking for pin_to_display_plane for all the pinning and locking.
With the locking removed from set_cache_level, we need to fix
i915_gem_set_caching_ioctl to take the object reservation lock.
As this is a single lock, we don't need to use the ww dance.
Changes since v1:
- Do not use ww locking in i915_gem_set_caching_ioctl (Thomas).
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-24-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
We want to start requiring the reservation_lock instead of obj->mm.lock
for pinning objects, take the ww lock inside vm_fault_gtt as a first step
towards the legacy lock removal.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-23-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Make sure vma_lock is not used as inner lock when kernel context is used,
and add ww handling where appropriate.
Ensure that execbuf selftests keep passing by using ww handling.
Changes since v2:
- Fix i915_gem_context finally.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-22-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
This function does not use intel_context_create_request, so it has
to use the same locking order as normal code. This is required to
shut up lockdep in selftests.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-20-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Some i915 selftests still use i915_vma_lock() as inner lock, and
intel_context_create_request() intel_timeline->mutex as outer lock.
Fortunately for selftests this is not an issue, they should be fixed
but we can move ahead and cleanify lockdep now.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-19-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
We have the ordering of timeline->mutex vs resv_lock wrong,
convert the i915_pin_vma and intel_context_pin as well to
future-proof this.
We may need to do future changes to do this more transaction-like,
and only get down to a single i915_gem_ww_ctx, but for now this
should work.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-18-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Instead of using intel_context_create_request(), use intel_context_pin()
and i915_create_request directly.
Now all those calls are gone outside of selftests. :)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-17-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
This is the last part outside of selftests that still don't use the
correct lock ordering of timeline->mutex vs resv_lock.
With gem fixed, there are a few places that still get locking wrong:
- gvt/scheduler.c
- i915_perf.c
- Most if not all selftests.
Changes since v1:
- Add intel_engine_pm_get/put() calls to fix use-after-free when using
intel_engine_get_pool().
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-16-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
As a preparation step for full object locking and wait/wound handling
during pin and object mapping, ensure that we always pass the ww context
in i915_gem_execbuffer.c to i915_vma_pin, use lockdep to ensure this
happens.
This also requires changing the order of eb_parse slightly, to ensure
we pass ww at a point where we could still handle -EDEADLK safely.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-15-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Instead of doing everything inside of pin_mutex, we move all pinning
outside. Because i915_active has its own reference counting and
pinning is also having the same issues vs mutexes, we make sure
everything is pinned first, so the pinning in i915_active only needs
to bump refcounts. This allows us to take pin refcounts correctly
all the time.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-14-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
We want to lock all gem objects, including the engine context objects,
rework the throttling to ensure that we can do this. Now we only throttle
once, but can take eb_pin_engine while acquiring objects. This means we
will have to drop the lock to wait. If we don't have to throttle we can
still take the fastpath, if not we will take the slowpath and wait for
the throttle request while unlocked.
The engine has to be pinned as first step, otherwise gpu relocations
won't work.
Changes since v1:
- Only need to get a throttled request in the fastpath, no need for
a global flag any more.
- Always free the waited request correctly.
Changes since v2:
- Use intel_engine_pm_get()/put() to keeep engine pool alive during
EDEADLK handling.
Changes since v3:
- Fix small rq leak.
Changes since v4:
- Use a single reloc_context, for intel_context_pin_ww().
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-13-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Those arguments are already set as eb.file and eb.args, so kill off
the extra arguments. This will allow us to move eb_pin_engine() to
after we reserved all BO's.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-12-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
We want to start using ww locking in intel_context_pin, for this
we need to lock multiple objects, and the single i915_gem_object_lock
is not enough.
Convert to using ww-waiting, and make sure we always pin intel_context_state,
even if we don't have a renderstate object.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-10-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Now that we changed execbuf submission slightly to allow us to do all
pinning in one place, we can now simply add ww versions on top of
struct_mutex. All we have to do is a separate path for -EDEADLK
handling, which needs to unpin all gem bo's before dropping the lock,
then starting over.
This finally allows us to do parallel submission, but because not
all of the pinning code uses the ww ctx yet, we cannot completely
drop struct_mutex yet.
Changes since v1:
- Keep struct_mutex for now. :(
Changes since v2:
- Make sure we always lock the ww context in slowpath.
Changes since v3:
- Don't call __eb_unreserve_vma in eb_move_to_gpu now; this can be
done on normal unlock path.
- Unconditionally release vmas and context.
Changes since v4:
- Rebased on top of struct_mutex reduction.
Changes since v5:
- Remove training wheels.
Changes since v6:
- Fix accidentally broken -ENOSPC handling.
Changes since v7:
- Handle gt buffer pool better.
Changes since v8:
- Properly clear variables, to make -EDEADLK handling not BUG.
Change since v9:
- Fix unpinning fence on pnv and below.
Changes since v10:
- Make relocation gpu chaining working again.
Changes since v11:
- Remove relocation chaining, pain to make it work.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-9-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
We want to introduce backoff logic, but we need to lock the
pool object as well for command parsing. Because of this, we
will need backoff logic for the engine pool obj, move the batch
validation up slightly to eb_lookup_vmas, and the actual command
parsing in a separate function which can get called from execbuf
relocation fast and slowpath.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-8-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Execbuffer submission will perform its own WW locking, and we
cannot rely on the implicit lock there.
This also makes it clear that the GVT code will get a lockdep splat when
multiple batchbuffer shadows need to be performed in the same instance,
fix that up.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-7-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
i915_gem_ww_ctx is used to lock all gem bo's for pinning and memory
eviction. We don't use it yet, but lets start adding the definition
first.
To use it, we have to pass a non-NULL ww to gem_object_lock, and don't
unlock directly. It is done in i915_gem_ww_ctx_fini.
Changes since v1:
- Change ww_ctx and obj order in locking functions (Jonas Lahtinen)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-6-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
This reverts commit 0f1dd02295 ("drm/i915/gem: Split eb_vma into
its own allocation") and also moves all unreserving to a single
place at the end, which is a minor simplification.
With the WW locking, we will drop all references only at the
end when unlocking, so refcounting can now be removed.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-5-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
This reverts commit 7dc8f11437 ("drm/i915/gem: Drop relocation
slowpath"). We need the slowpath relocation for taking ww-mutex
inside the page fault handler, and we will take this mutex when
pinning all objects.
We also functionally revert ef398881d2 ("drm/i915/gem: Limit
struct_mutex to eb_reserve"), as we need the struct_mutex in
the slowpath as well, and a tiny part of 003d8b9143 ("drm/i915/gem:
Only call eb_lookup_vma once during execbuf ioctl"). Specifically,
we make the -EAGAIN handling part of fallback to slowpath again.
With this, we have a proper working slowpath again, which
will allow us to do fault handling with WW locks held.
[mlankhorst: Adjusted for reloc_gpu_flush() changes]
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[mlankhorst: Removed extra reloc_gpu_flush()]
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-4-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
This reverts commit 964a9b0f61 ("drm/i915/gem: Use chained reloc batches")
and commit 0e97fbb080 ("drm/i915/gem: Use a single chained reloc batches
for a single execbuf").
When adding ww locking to execbuf, it's hard enough to deal with a
single BO that is part of relocation execution. Chaining is hard to
get right, and with GPU relocation deprecated, it's best to drop this
altogether, instead of trying to fix something we will remove.
This is not a completely 1:1 revert, we reset rq_size to 0 in
reloc_cache_init, this was from e3d291301f ("drm/i915/gem: Implement legacy
MI_STORE_DATA_IMM"), because we don't want to break the selftests. (Daniel)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-3-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
This reverts commit 9e0f9464e2 ("drm/i915/gem: Async GPU relocations only"),
and related commit 7ac2d2536d ("drm/i915/gem: Delete unused code").
Async GPU relocations are not the path forward, we want to remove
GPU accelerated relocation support eventually when userspace is fixed
to use VM_BIND, and this is the first step towards that. We will keep
async gpu relocations around for now, until userspace is fixed.
Relocation support will be disabled completely on platforms where there
was never any userspace that depends on it, as the hardware doesn't
require it from at least gen9+ onward. For older platforms, the plan
is to use cpu relocations only.
The igt side is fixed in igt commit 39e9aa1032a4e ("tests/i915: Remove
subtests that rely on async relocation behavior").
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-2-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
If dma_fence_chain_find_seqno() reports an error, it does so in its
preamble before it disposes of the input fence. On handling the
error, we need to drop the reference to the fence.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2292
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 13149e8baf ("drm/i915: add syncobj timeline support")
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200806161056.17593-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
As we now protect the timeline list using RCU, we can drop the
timeline->mutex for guarding the list iteration during context close, as
we are searching for an inflight request. Any new request will see the
context is banned and not be submitted. In doing so, pull the checks for
a concurrent submission of the request (notably the
i915_request_completed()) under the engine spinlock, to fully serialise
with __i915_request_submit()). That is in the case of preempt-to-busy
where the request may be completed during the __i915_request_submit(),
we need to be careful that we sample the request status after
serialising so that we don't miss the request the engine is actually
submitting.
Fixes: 4a31741521 ("drm/i915/gem: Refine occupancy test in kill_context()")
References: d22d2d073e ("drm/i915: Protect i915_request_await_start from early waits") # rcu protection of timeline->requests
References: https://gitlab.freedesktop.org/drm/intel/-/issues/1622
References: https://gitlab.freedesktop.org/drm/intel/-/issues/2158
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200806105954.7766-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
When igt_random_offset() is a given a range of [0, PAGE_SIZE], it is
allowed to return 0. However, attempting to use a size of 0 for the
igt_lmem_write_cpu() byte poking, leads to call igt_random_offset() with
a range of [offset, offset + 0] and ask it to find a length of 4 within
it. This triggers the bug on that the requested length should fit within
the range!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200806145728.16495-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Currently we hold no actual reference to the request nor context while
they are attached to a breadcrumb. To avoid freeing the request/context
too early, we serialise with cancel-breadcrumbs by taking the irq
spinlock in i915_request_retire(). The alternative is to take a
reference for a new breadcrumb and release it upon signaling; removing
the more frequently hit contention point in i915_request_retire().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200801160225.6814-2-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Joonas: Rebased and reordered into drm-intel-gt-next branch]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Move the __intel_breadcrumbs_arm_irq earlier, next to the disarm_irq, so
that we can make use of it in the following patch.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200801160225.6814-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
kmalloc uses power-of-two slab buckets for small allocations (up to a
few pages). Since i915_page_directory is a page of pointers, plus a
couple more, this is rounded up to 8K, and we waste nearly 50% of that
allocation. Long terms this leads to poor memory utilisation, bloating
the kernel footprint, but the problem is exacerbated by our conservative
preallocation scheme for binding VMA. As we are required to allocate all
levels for each vma just in case we need to insert them upon binding,
this leads to a large multiplication factor for a single page vma. By
halving the allocation we need for the page directory structure, we
halve the impact of that factor, bringing workloads that once fitted into
memory, hopefully back to fitting into memory.
We maintain the split between i915_page_directory and i915_page_table as
we only need half the allocation for the lowest, most populous, level.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200729164219.5737-3-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The GEM object is grossly overweight for the practicality of tracking
large numbers of individual pages, yet it is currently our only
abstraction for tracking DMA allocations. Since those allocations need
to be reserved upfront before an operation, and that we need to break
away from simple system memory, we need to ditch using plain struct page
wrappers.
In the process, we drop the WC mapping as we ended up clflushing
everything anyway due to various issues across a wider range of
platforms. Though in a future step, we need to drop the kmap_atomic
approach which suggests we need to pre-map all the pages and keep them
mapped.
v2: Verify our large scratch page is suitably DMA aligned; and manually
clear the scratch since we are allocating plain struct pages full of
prior content.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200729164219.5737-2-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
We need to make the DMA allocations used for page directories to be
performed up front so that we can include those allocations in our
memory reservation pass. The downside is that we have to assume the
worst case, even before we know the final layout, and always allocate
enough page directories for this object, even when there will be overlap.
This unfortunately can be quite expensive, especially as we have to
clear/reset the page directories and DMA pages, but it should only be
required during early phases of a workload when new objects are being
discovered, or after memory/eviction pressure when we need to rebind.
Once we reach steady state, the objects should not be moved and we no
longer need to preallocating the pages tables.
It should be noted that the lifetime for the page directories DMA is
more or less decoupled from individual fences as they will be shared
across objects across timelines.
v2: Only allocate enough PD space for the PTE we may use, we do not need
to allocate PD that will be left as scratch.
v3: Store the shift unto the first PD level to encapsulate the different
PTE counts for gen6/gen8.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200729164219.5737-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
On the virtual engines, we only use the intel_breadcrumbs for tracking
signaling of stale breadcrumbs from the irq_workers. They do not have
any associated interrupt handling, active requests are passed to a
physical engine and associated breadcrumb interrupt handler. This causes
issues for us as we need to ensure that we do not actually try and
enable interrupts and the powermanagement required for them on the
virtual engine, as they will never be disabled. Instead, let's
specify the physical engine used for interrupt handler on a particular
breadcrumb.
v2: Drop b->irq_armed = true mocking for no interrupt HW
Fixes: 4fe6abb8f5 ("drm/i915/gt: Ignore irq enabling on the virtual engines")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200731154834.8378-4-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
One more complication of preempt-to-busy with respect to the virtual
engine is that we may have retired the last request along the virtual
engine at the same time as preparing to submit the completed request to
a new engine. That submit will be shortcircuited, but not before we have
updated the context with the new register offsets and marked the virtual
engine as bound to the new engine (by calling swap on ve->siblings[]).
As we may have just retired the completed request, we may also be in the
middle of calling virtual_context_exit() to turn off the power management
associated with the virtual engine, and that in turn walks the
ve->siblings[]. If we happen to call swap() on the array as we walk, we
will call intel_engine_pm_put() twice on the same engine.
In this patch, we prevent this by only updating the bound engine after a
successful submission which weeds out the already completed requests.
Alternatively, we could walk a non-volatile array for the pm, such as
using the engine->mask. The small advantage to performing the update
after the submit is that we then only have to do a swap for active
requests.
Fixes: 22b7a426bb ("drm/i915/execlists: Preempt-to-busy")
References: 6d06779e86 ("drm/i915: Load balancing across a virtual engine"
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: "Nayana, Venkata Ramana" <venkata.ramana.nayana@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200731154834.8378-3-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
After staring at the breadcrumb enabling/cancellation and coming to the
conclusion that the cause of the mysterious stale breadcrumbs must the
act of submitting a completed requests, we can then redirect those
completed requests onto a dedicated signaled_list at the time of
construction and so eliminate intel_engine_transfer_stale_breadcrumbs().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200731154834.8378-2-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Since the breadcrumb enabling/cancelling itself is serialised by the
breadcrumbs.irq_lock, with a bit of care we can remove the outer
serialisation with i915_request.lock for concurrent
dma_fence_enable_signaling(). This has the important side-effect of
eliminating the nested i915_request.lock within request submission.
The challenge in serialisation is around the unsubmission where we take
an active request that wants a breadcrumb on the signaling engine and
put it to sleep. We do not want a concurrent
dma_fence_enable_signaling() to attach a breadcrumb as we unsubmit, so
we must mark the request as no longer active before serialising with the
concurrent enable-signaling.
On retire, we serialise with the concurrent enable-signaling, but
instead of clearing ACTIVE, we mark it as SIGNALED.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200731154834.8378-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Joonas: Rebased and reordered into drm-intel-gt-next branch]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Before we can execute a request, we must wait for all of its vma to be
bound. This is a frequent operation for which we can optimise away a
few atomic operations (notably a cmpxchg) in lieu of the RCU protection.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200731085015.32368-7-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
As the conversion between idle-barrier and full i915_active_fence is
already serialised by explicit memory barriers, we can reduce the
spinlock in i915_active_acquire_preallocate_barrier() for finding an
idle-barrier to reuse to an RCU read lock to ensure the fence remains
valid, only taking the spinlock for the update of the rbtree itself.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200731085015.32368-6-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Rather than require the next timeline after idling to match the MRU
before idling, reset the index on the node and allow it to match the
first request. However, this requires cmpxchg(u64) and so is not trivial
on 32b, so for compatibility we just fallback to keeping the cached node
pointing to the MRU timeline.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200731085015.32368-5-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Whenever an i915_active idles, we prune its tree of old fence slots to
prevent a gradual leak should it be used to track many, many timelines.
The downside is that we then have to frequently reallocate the rbtree.
A compromise is that we keep the most recently used fence slot, and
reuse that for the next active reference as that is the most likely
timeline to be reused.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200731085015.32368-4-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Sometimes we have to be very careful not to allocate underneath a mutex
(or spinlock) and yet still want to track activity. Enter
i915_active_acquire_for_context(). This raises the activity counter on
i915_active prior to use and ensures that the fence-tree contains a slot
for the context.
v2: Refactor active_lookup() so it can be called again before/after
locking to resolve contention. Since we protect the rbtree until we
idle, we can do a lockfree lookup, with the caveat that if another
thread performs a concurrent insertion, the rotations from the insert
may cause us to not find our target. A second pass holding the treelock
will find the target if it exists, or the place to perform our
insertion.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200731085015.32368-3-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
If no active callback is defined for i915_active, we do not need to
serialise its enabling with the mutex. We still do only want to call the
debug activate once, and must still serialise with a concurrent retire.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200731085015.32368-2-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Since we pass around encoded parameters to the kernel context
constructor using the ce->timeline pointer, we can no longer assert that
it should be zero for mock timeline construction.
Fixes: d1bf5dd8f6 ("drm/i915/gt: Support multiple pinned timelines")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200731102206.6793-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Joonas: Updated Fixes: link after rebasing and reordering into drm-intel-gt-next branch]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
We need to ensure that the list is valid prior to marking the node as
retrievable, otherwise we may see two threads compete over the same node
in intel_gt_get_buffer_pool(). If the first thread acquires and releases
the node in the same jiffie, the second thread may then acquire it (as
the jiffie now again matches the expected value) and claim the node
before it is put back into the list.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730134049.8822-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
We may need to allocate more than one pinned context/timeline for each
engine which can utilise the per-engine HWSP, so we need to give each
a different offset within it.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730183906.25422-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Avoid exposing a partially constructed context by deferring the
list_add() from the initial construction to the end of registration.
Otherwise, if we peek into the list of contexts from inside debugfs, we
may see the partially constructed context and chase down some dangling
incomplete pointers.
Reported-by: CQ Tang <cq.tang@intel.com>
Fixes: 3aa9945a52 ("drm/i915: Separate GEM context construction and registration to userspace")
References: f6e8aa3871 ("drm/i915: Report the number of closed vma held by each context in debugfs")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: CQ Tang <cq.tang@intel.com>
Cc: <stable@vger.kernel.org> # v5.2+
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730092856.23615-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
A last minute change, that unfortunately broke CI so badly it declared
SUCCESS, was to refactor the debug free all buffer pool code to reuse
the normal worker, inverted the termination condition so that it instead
of discarding the nodes, they were all declared young enough and
eligible for reuse.
Fixes: 06b73c2d0b ("drm/i915/gt: Delay taking the spinlock for grabbing from the buffer pool")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200729110756.2344-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Joonas: Updating Fixes: link after rebasing and reordering into drm-intel-gt-next]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Before we peek at the barrier status for an assert, first serialise with
its callbacks so that we see a stable value.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200728153325.28351-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Some very low hanging fruit, but contention on the pool->lock is
noticeable between intel_gt_get_buffer_pool() and pool_retire(), with
the majority of the hold time due to the locked list iteration. If we
make the node itself RCU protected, we can perform the search for an
suitable node just under RCU, reserving taking the lock itself for
claiming the node and manipulating the list.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200729080245.8070-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Unlike rcs where we have conclusive evidence from our selftesting that
disabling the preparser before performing the TLB invalidate and
relocations does impact upon the GPU execution, the evidence for the
same requirement on xcs is much more circumstantial. Let's apply the
preparser disable between batches as we invalidate the TLB as a dose of
healthy paranoia, just in case.
References: https://gitlab.freedesktop.org/drm/intel/-/issues/2169
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200728152110.830-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
I915_GEM_THROTTLE dates back to the time before contexts where there was
just a single engine, and therefore a single timeline and request list
globally. That request list was in execution/retirement order, and so
walking it to find a particular aged request made sense and could be
split per file.
That is no more. We now have many timelines with a file, as many as the
user wants to construct (essentially per-engine, per-context). Each of
those run independently and so make the single list futile. Remove the
disordered list, and iterate over all the timelines to find a request to
wait on in each to satisfy the criteria that the CPU is no more than 20ms
ahead of its oldest request.
It should go without saying that the I915_GEM_THROTTLE ioctl is no
longer used as the primary means of throttling, so it makes sense to push
the complication into the ioctl where it only impacts upon its few
irregular users, rather than the execbuf/retire where everybody has to
pay the cost. Fortunately, the few users do not create vast amount of
contexts, so the loops over contexts/engines should be concise.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200728152010.30701-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
We include a tasklet flush before waiting on a request as a precaution
against the HW being lax in event signaling. We now have a precautionary
flush in the engine's heartbeat and so do not need to be quite so
zealous on every request wait. If we focus on the request, the only
tasklet flush that matters is if there is a delay in submitting this
request to HW, so if the request is not ready to be executed, no
advantage in reducing this wait can be gained by running the tasklet.
And there is little point in doing busy work for no result.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200715115147.11866-10-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Currently, we use i915_request_completed() directly in
i915_request_wait() and follow up with a manual invocation of
dma_fence_signal(). This appears to cause a large number of contentions
on i915_request.lock as when the process is woken up after the fence is
signaled by an interrupt, we will then try and call dma_fence_signal()
ourselves while the signaler is still holding the lock.
dma_fence_is_signaled() has the benefit of checking the
DMA_FENCE_FLAG_SIGNALED_BIT prior to calling dma_fence_signal() and so
avoids most of that contention.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716100754.5670-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Add support for the video pattern generator (VPG) BER pattern mode and
configuration in runtime.
This enables using the debugfs interface to manipulate the VPG after
the pipeline is set.
Also, enables the usage of the VPG BER pattern.
Changes in v2:
- Added VID_MODE_VPG_MODE
- Solved incompatible return type on __get and __set
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Adrian Pop <pop.adrian61@gmail.com>
Signed-off-by: Angelo Ribeiro <angelo.ribeiro@synopsys.com>
Tested-by: Yannick Fertre <yannick.fertre@st.com>
Tested-by: Adrian Pop <pop.adrian61@gmail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Jose Abreu <jose.abreu@synopsys.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a809feb7d7153a92e323416f744f1565e995da01.1586180592.git.angelo.ribeiro@synopsys.com
Current code enables the HS clock when video mode is started or to
send out a HS command, and disables the HS clock to send out a LP
command. This is not what DSI spec specify.
Enable HS clock either in command and in video mode.
Set automatic HS clock management for panels and devices that
support non-continuous HS clock.
Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701194234.18123-1-yannick.fertre@st.com
Current code does not properly computes the max length of LP
commands that can be send during H or V sync, and rely on static
values.
Limiting the max LP length to 4 byte during the V-sync is overly
conservative.
Relax the limit and allows longer LP commands (16 bytes) to be
sent during V-sync.
Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701143131.841-1-yannick.fertre@st.com
Current code only sends LP commands in command mode.
Allows sending LP commands also in video mode by setting the
proper flag in DSI_VID_MODE_CFG.
Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708140836.32418-1-yannick.fertre@st.com
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCX1Rn1wAKCRCAXGG7T9hj
vlEjAQC/KGC3wYw5TweWcY48xVzgvued3JLAQ6pcDlOe6osd6AEAzZcZKgL948cx
oY0T98dxb/U+lUhbIzhpBr/30g8JbAQ=
=Xcxp
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.9-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
"A small series for fixing a problem with Xen PVH guests when running
as backends (e.g. as dom0).
Mapping other guests' memory is now working via ZONE_DEVICE, thus not
requiring to abuse the memory hotplug functionality for that purpose"
* tag 'for-linus-5.9-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: add helpers to allocate unpopulated memory
memremap: rename MEMORY_DEVICE_DEVDAX to MEMORY_DEVICE_GENERIC
xen/balloon: add header guard
Now that the PWM drivers which we use have been converted to the atomic
PWM API, we can move the i915 panel code over to using the atomic PWM API.
The removes a long standing FIXME and this removes a flicker where
the backlight brightness would jump to 100% when i915 loads even if
using the fastset path.
Note that this commit also simplifies pwm_disable_backlight(), by dropping
the intel_panel_actually_set_backlight(..., 0) call. This call sets the
PWM to 0% duty-cycle. I believe that this call was only present as a
workaround for a bug in the pwm-crc.c driver where it failed to clear the
PWM_OUTPUT_ENABLE bit. This is fixed by an earlier patch in this series.
After the dropping of this workaround, the usleep call, which seems
unnecessary to begin with, has no useful effect anymore, so drop that too.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200903112337.4113-18-hdegoede@redhat.com
So far for devices using an external PWM controller (devices using
pwm_setup_backlight()), we have been hardcoding the minimum allowed
PWM level to 0. But several of these devices specify a non 0 minimum
setting in their VBT.
Change pwm_setup_backlight() to use get_backlight_min_vbt() to get
the minimum level.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200903112337.4113-17-hdegoede@redhat.com
So far for devices using an external PWM controller (devices using
pwm_setup_backlight()), we have been hardcoding the period-time passed to
pwm_config() to 21333 ns.
I suspect this was done because many VBTs set the PWM frequency to 200
which corresponds to a period-time of 5000000 ns, which greatly exceeds
the PWM_MAX_PERIOD_NS define in the Crystal Cove PMIC PWM driver, which
used to be 21333.
This PWM_MAX_PERIOD_NS define was actually based on a bug in the PWM
driver where its period and duty-cycle times where off by a factor of 256.
Due to this bug the hardcoded CRC_PMIC_PWM_PERIOD_NS value of 21333 would
result in the PWM driver using its divider of 128, which would result in
a PWM output frequency of 6000000 Hz / 256 / 128 = 183 Hz. So actually
pretty close to the default VBT value of 200 Hz.
Now that this bug in the pwm-crc driver is fixed, we can actually use
the VBT defined frequency.
This is important because:
a) With the pwm-crc driver fixed it will now translate the hardcoded
CRC_PMIC_PWM_PERIOD_NS value of 21333 ns / 46 Khz to a PWM output
frequency of 23 KHz (the max it can do).
b) The pwm-lpss driver used on many models has always honored the
21333 ns / 46 Khz request
Some panels do not like such high output frequencies. E.g. on a Terra
Pad 1061 tablet, using the LPSS PWM controller, the backlight would go
from off to max, when changing the sysfs backlight brightness value from
90-100%, anything under aprox. 90% would turn the backlight fully off.
Honoring the VBT specified PWM frequency will also hopefully fix the
various bug reports which we have received about users perceiving the
backlight to flicker after a suspend/resume cycle.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200903112337.4113-16-hdegoede@redhat.com
Factor the code which checks and drm_dbg_kms-s the VBT PWM frequency
out of get_backlight_max_vbt().
This is a preparation patch for honering the VBT PWM frequency for
devices which use an external PWM controller (devices using
pwm_setup_backlight()).
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200903112337.4113-15-hdegoede@redhat.com
mtk_hdmi_phy is currently placed inside mediatek drm driver, but it's
more suitable to place a phy driver into phy driver folder, so move
mtk_hdmi_phy driver into phy driver folder.
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
mtk_hdmi_phy is a part of mtk_hdmi module, but phy driver should be an
independent module rather than be part of drm module, so separate the phy
driver to an independent module.
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
tz_disabled is used to control mtk_hdmi output signal, but this variable
is stored in mtk_hdmi_phy and mtk_hdmi_phy does not use it. So move
tz_disabled to mtk_hdmi where it's used.
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
The dpsub driver uses the DMA engine API, and thus selects DMA_ENGINE to
provide that API. DMA_ENGINE depends on DMADEVICES, which can be
deselected by the user, creating a possibly unmet indirect dependency:
WARNING: unmet direct dependencies detected for DMA_ENGINE
Depends on [n]: DMADEVICES [=n]
Selected by [m]:
- DRM_ZYNQMP_DPSUB [=m] && HAS_IOMEM [=y] && (ARCH_ZYNQMP || COMPILE_TEST [=y]) && COMMON_CLK [=y] && DRM [=m] && OF [=y]
Add a dependency on DMADEVICES to fix this.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
The upstream S6E63M0 driver has some peculiarities around
the prepare/enable disable/unprepare sequence: the screen
is taken out of sleep in prepare() as part of
s6e63m0_init() the put to on with MIPI_DCS_SET_DISPLAY_ON
in enable().
However it is just put into sleep mode directly in
disable(). As disable()/enable() can be called without
unprepare()/prepare() being called, this is unbalanced,
we should take the display out of sleep in enable()
then turn it off().
Further MIPI_DCS_SET_DISPLAY_OFF is never called
balanced with MIPI_DCS_SET_DISPLAY_ON.
The vendor driver for Samsung GT-I8190 (Golden) does all
of these things in strict order.
Augment the driver to do exit sleep/set display on in
enable() and set display off/enter sleep in disable().
Further send an explicit reset pulse in power_on() so we
come up in a known state, and issue the MCS_ERROR_CHECK
command after setting display on like the vendor driver
does. Also use the timings from the vendor driver in
the sequence.
Doing all of these things makes the display much more
stable on the Samsung GT-I8190 when enabling/disabling
the display pipeline.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Cc: Stephan Gerhold <stephan@gerhold.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200817213906.88207-1-linus.walleij@linaro.org
We add code to identify a few different panels mounted
on the s6e63m0 controller. This is necessary to achieve
the proper biasing with DSI versions of the panel.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200809215104.1830206-5-linus.walleij@linaro.org
This adds code to send read commands to read a single
byte from the display, in order to perform MTP ID
look-up of the mounted panel on the s6e63m0 controller.
This is needed for proper biasing on the DSI variants.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200809215104.1830206-4-linus.walleij@linaro.org
This makes it possible to use the s6e63m0 panel with a
DSI host, such as in the Samsung GT-I8190 (Golden) mobile
phone.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200809215104.1830206-3-linus.walleij@linaro.org
This panel can be accessed using both SPI and DSI.
To make it possible to probe and use the device also from
a DSI bus, first break out the SPI support to its own file.
Since all the panel driver does is write DCS commands to
the panel, we pass a DCS write function to probe()
from each subdriver.
We make the Kconfig entry for SPI mode default so all
current users will continue to work.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/384873/
XX_print like pfp_print/me_print/meq_print/roq_print are just
used in file a5xx_debugfs.c. And these function always return
0, this return value is meaningless.
This change is to make the code a bit more readable.
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Now that it isn't causing problems to use dma_map/unmap, we can drop the
hack of using dma_sync in certain cases.
Signed-off-by: Rob Clark <robdclark@chromium.org>
MSM bus scaling has moved on to use interconnect framework
and downstream bus scaling apis are not present anymore.
Remove them as they are nop anyways in the current code,
no functional change.
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
MSM bus scaling has moved on to use interconnect framework
and downstream bus scaling apis are not present anymore.
Remove them as they are nop anyways in the current code,
no functional change.
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
This change adds support to scale src clk and bandwidth as
per composition requirements.
Interconnect registration for bw has been moved to mdp
device node from mdss to facilitate the scaling.
Changes in v1:
- Address armv7 compilation issues with the patch (Rob)
Signed-off-by: Kalyan Thota <kalyan_t@codeaurora.org>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Disable the RPTR shadow across all targets. It will be selectively
re-enabled later for targets that need it.
Cc: stable@vger.kernel.org
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Temporarily disable preemption on a5xx targets pending some improvements
to protect the RPTR shadow from being corrupted.
Cc: stable@vger.kernel.org
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
a650 supports expanded apriv support that allows us to map critical buffers
(ringbuffer and memstore) as as privileged to protect them from corruption.
Cc: stable@vger.kernel.org
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The main a5xx preemption record can be marked as privileged to
protect it from user access but the counters storage needs to be
remain unprivileged. Split the buffers and mark the critical memory
as privileged.
Cc: stable@vger.kernel.org
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
amdgpu:
- Fix for 32bit systems
- SW CTF fix
- Update for Sienna Cichlid
- CIK bug fixes
radeon:
- PLL fix
i915:
- Clang build warning fix
- HDCP fixes
nouveau:
- display fixes
-----BEGIN PGP SIGNATURE-----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=eBDY
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2020-09-04' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Not much going on this week, nouveau has a display hw bug workaround,
amdgpu has some PM fixes and CIK regression fixes, one single radeon
PLL fix, and a couple of i915 display fixes.
amdgpu:
- Fix for 32bit systems
- SW CTF fix
- Update for Sienna Cichlid
- CIK bug fixes
radeon:
- PLL fix
i915:
- Clang build warning fix
- HDCP fixes
nouveau:
- display fixes"
* tag 'drm-fixes-2020-09-04' of git://anongit.freedesktop.org/drm/drm:
drm/nouveau/kms/nv50-gp1xx: add WAR for EVO push buffer HW bug
drm/nouveau/kms/nv50-gp1xx: disable notifies again after core update
drm/nouveau/kms/nv50-: add some whitespace before debug message
drm/nouveau/kms/gv100-: Include correct push header in crcc37d.c
drm/radeon: Prefer lower feedback dividers
drm/amdgpu: Fix bug in reporting voltage for CIK
drm/amdgpu: Specify get_argument function for ci_smu_funcs
drm/amd/pm: enable MP0 DPM for sienna_cichlid
drm/amd/pm: avoid false alarm due to confusing softwareshutdowntemp setting
drm/amd/pm: fix is_dpm_running() run error on 32bit system
drm/i915: Clear the repeater bit on HDCP disable
drm/i915: Fix sha_text population code
drm/i915/display: Ensure that ret is always initialized in icl_combo_phy_verify_state
Merge emailed patches from Peter Xu:
"This is a small series that I picked up from Linus's suggestion to
simplify cow handling (and also make it more strict) by checking
against page refcounts rather than mapcounts.
This makes uffd-wp work again (verified by running upmapsort)"
Note: this is horrendously bad timing, and making this kind of
fundamental vm change after -rc3 is not at all how things should work.
The saving grace is that it really is a a nice simplification:
8 files changed, 29 insertions(+), 120 deletions(-)
The reason for the bad timing is that it turns out that commit
17839856fd ("gup: document and work around 'COW can break either way'
issue" broke not just UFFD functionality (as Peter noticed), but Mikulas
Patocka also reports that it caused issues for strace when running in a
DAX environment with ext4 on a persistent memory setup.
And we can't just revert that commit without re-introducing the original
issue that is a potential security hole, so making COW stricter (and in
the process much simpler) is a step to then undoing the forced COW that
broke other uses.
Link: https://lore.kernel.org/lkml/alpine.LRH.2.02.2009031328040.6929@file01.intranet.prod.int.rdu2.redhat.com/
* emailed patches from Peter Xu <peterx@redhat.com>:
mm: Add PGREUSE counter
mm/gup: Remove enfornced COW mechanism
mm/ksm: Remove reuse_ksm_page()
mm: do_wp_page() simplification
With the more strict (but greatly simplified) page reuse logic in
do_wp_page(), we can safely go back to the world where cow is not
enforced with writes.
This essentially reverts commit 17839856fd ("gup: document and work
around 'COW can break either way' issue"). There are some context
differences due to some changes later on around it:
2170ecfa76 ("drm/i915: convert get_user_pages() --> pin_user_pages()", 2020-06-03)
376a34efa4 ("mm/gup: refactor and de-duplicate gup_fast() code", 2020-06-03)
Some lines moved back and forth with those, but this revert patch should
have striped out and covered all the enforced cow bits anyways.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With the intel_modeset_* probe functions clarified, we can continue with
moving more related calls to the right layer:
- drm_vblank_init()
- intel_bios_init()
- intel_vga_register()
- intel_csr_ucode_init()
Unfortunately, for the time being, we also need to move a call to the
*wrong* layer: the power domain init.
No functional changes.
v2: move probe failure while at it, power domain init
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/da229ffbed64983f002605074533c8b2878d17ee.1599056955.git.jani.nikula@intel.com
Unlike we previously thought, the per-pixel alpha is just as broken on the
A20 as it is on the A10. Remove the quirk that says we can use it.
Fixes: dcf496a6a6 ("drm/sun4i: sun4i: Introduce a quirk for lowest plane alpha support")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Cc: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200728134810.883457-2-maxime@cerno.tech
Unlike what we previously thought, only the per-pixel alpha is broken on
the lowest plane and the per-plane alpha isn't. Remove the check on the
alpha property being set on the lowest plane to reject a mode.
Fixes: dcf496a6a6 ("drm/sun4i: sun4i: Introduce a quirk for lowest plane alpha support")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Cc: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200728134810.883457-1-maxime@cerno.tech
Function sun8i_vi_layer_get_csc_mode() is supposed to return CSC mode
but due to inproper return type (bool instead of u32) it returns just 0
or 1. Colors are wrong for YVU formats because of that.
Fixes: daab3d0e8e ("drm/sun4i: de2: csc_mode in de2 format struct is mostly redundant")
Reported-by: Roman Stratiienko <r.stratiienko@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Tested-by: Roman Stratiienko <r.stratiienko@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200901220305.6809-1-jernej.skrabec@siol.net
To be used in order to create foreign mappings. This is based on the
ZONE_DEVICE facility which is used by persistent memory devices in
order to create struct pages and kernel virtual mappings for the IOMEM
areas of such devices. Note that on kernels without support for
ZONE_DEVICE Xen will fallback to use ballooned pages in order to
create foreign mappings.
The newly added helpers use the same parameters as the existing
{alloc/free}_xenballooned_pages functions, which allows for in-place
replacement of the callers. Once a memory region has been added to be
used as scratch mapping space it will no longer be released, and pages
returned are kept in a linked list. This allows to have a buffer of
pages and prevents resorting to frequent additions and removals of
regions.
If enabled (because ZONE_DEVICE is supported) the usage of the new
functionality untangles Xen balloon and RAM hotplug from the usage of
unpopulated physical memory ranges to map foreign pages, which is the
correct thing to do in order to avoid mappings of foreign pages depend
on memory hotplug.
Note the driver is currently not enabled on Arm platforms because it
would interfere with the identity mapping required on some platforms.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20200901083326.21264-4-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
A couple of minor fixes to the display changes that went in for 5.9.
The most important of which is a workaround for a HW bug that was
exposed by better push buffer space management, leading to
random(ish...) display engine hangs.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <CACAvsv5QDxyMihrxbPk+-sORnaYtjR6_dbM68gEhb2wxht_G1w@mail.gmail.com
The TVE200 will occasionally print a bunch of lost interrupts
and similar dmesg messages, sometimes during boot and sometimes
after disabling and coming back to enablement. This is probably
because the hardware is left in an unknown state by the boot
loader that displays a logo.
This can be fixed by bringing the controller into a known state
by resetting the controller while enabling it. We retry reset 5
times like the vendor driver does. We also put the controller
into reset before de-clocking it and clear all interrupts before
enabling the vblank IRQ.
This makes the video enable/disable/enable cycle rock solid
on the D-Link DIR-685. Tested extensively.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200820203144.271081-1-linus.walleij@linaro.org
Print the name of the client rather than the number. This
makes it easier to debug what block is causing the fault.
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Print the name of the client rather than the number. This
makes it easier to debug what block is causing the fault.
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Print the name of the client rather than the number. This
makes it easier to debug what block is causing the fault.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Print the name of the client rather than the number. This
makes it easier to debug what block is causing the fault.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It needs to load renoir_ta firmware because hdcp is enabled by default
for renoir now. This can avoid error:DTM TA is not initialized
Signed-off-by: Changfeng <Changfeng.Zhu@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Calculate the correct value for max_entries or we might run after the
page_address array.
v2: Xinhui pointed out we don't need the shift
v3: use local copy of start and simplify some calculation
v4: fix the case that we map less VA range than BO size
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: 1e691e2444 drm/amdgpu: stop allocating dummy GTT nodes
Reviewed-by: xinhui pan <xinhui.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The DRM device is a static member of
the amdgpu device structure and as such
always exists, so long as the PCI and
thus the amdgpu device exist.
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable multi-ring ih1 and ih2 for Arcturus only.
For Navi10 family multi-ring has been disabled.
Apparently, having multi-ring enabled in Navi was causing
continus page fault interrupts.
Further investigation is needed to get to the root cause.
Related issue link:
https://gitlab.freedesktop.org/drm/amd/-/issues/1279
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When GPU is in reset, its status isn't stable and ring buffer also need
be reset when resuming. Therefore driver should protect GPU recovery
thread from ring buffer accessed by other threads. Otherwise GPU will
randomly hang during recovery.
v2: correct indent
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Need to read back from registers for manual mode rather than
using the metrics table.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1164
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Will be used to fetch the fan speeds when manual fan mode is
set.
v2: squash in a Coverity fix from Colin Ian King
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No longer needed as we can calculate it based on
the fan's max rpm.
v2: minor code rework
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No longer needed as we can calculate it based on
the fan's max rpm.
v2: rework code to avoid possible uninitialized
variable use.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On hardware with multiple uvd instances, dependent uvd jobs
may get scheduled to different uvd instances. Because uvd_enc
jobs retain hw context, dependent jobs should always run on the
same uvd instance. This patch disables GPU scheduler's load balancer
for a context that binds jobs from the same context to a uvd
instance.
v2: Squash in uvd_enc fix
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Following functions are only used internally, not by drivers:
- devm_drm_dev_init
Also, now that we have a very slick and polished way to allocate a
drm_device with devm_drm_dev_alloc, update all the docs to reflect the
new reality. Mostly this consists of deleting old and misleading
hints. Two main ones:
- it is no longer required that the drm_device base class is first in
the structure. devm_drm_dev_alloc can cope with it being anywhere
- obviously embedded now strongly recommends using devm_drm_dev_alloc
v2: Fix typos (Noralf)
v3: Split out the removal of drm_dev_init, that's blocked on some
discussions on how to convert vgem/vkms/i915-selftests. Adjust commit
message to reflect that.
Cc: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Noralf Trønnes <noralf@tronnes.org> (v2)
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200902072627.3617301-1-daniel.vetter@ffwll.ch
In commit 4f0b4352bd ("drm/i915: Extract cdclk requirements checking
to separate function") the order of force_min_cdclk_changed check and
intel_modeset_checks(), was reversed. This broke the mechanism to
immediately force a new CDCLK minimum, and lead to driver probe
errors for display audio on GLK platform with 5.9-rc1 kernel. Fix
the issue by moving intel_modeset_checks() call later.
[vsyrjala: It also broke the ability of planes to bump up the cdclk
and thus could lead to underruns when eg. flipping from 32bpp to
64bpp framebuffer. To be clear, we still compute the new cdclk
correctly but fail to actually program it to the hardware due to
intel_set_cdclk_{pre,post}_plane_update() not getting called on
account of state->modeset==false.]
Fixes: 4f0b4352bd ("drm/i915: Extract cdclk requirements checking to separate function")
BugLink: https://github.com/thesofproject/linux/issues/2410
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200901151036.1312357-1-kai.vehmanen@linux.intel.com
That is not used any more.
v2: keep the NULL checks in TTM.
v3: remove unused variable
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/388646/
While working on TTM cleanups I've found that the io_reserve_lru used by
Nouveau is actually not working at all.
In general we should remove driver specific handling from the memory
management, so this patch moves the io_reserve_lru handling into Nouveau
instead.
v2: don't call ttm_bo_unmap_virtual in nouveau_ttm_io_mem_reserve
v3: rebased and use both base and offset in the check
v4: fix small typos and test the patch
v5: rebased and keep the mem.bus init in TTM.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/388643/
We are trying to remove the io_lru handling and depend
on zero init base, offset and addr here.
v2: init addr as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/388642/
Thanks to NVIDIA for confirming this workaround, and clarifying which HW
is affected.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com>
Looks like when we converted everything over to Nvidia's class headers,
we mistakenly included the nvif/push507b.h instead of nvif/pushc37b.h,
which resulted in breaking CRC reporting for volta+:
nouveau 0000:1f:00.0: disp: chid 0 stat 10003361 reason 3
[RESERVED_METHOD] mthd 0d84 data 00000000 code 00000000
nouveau 0000:1f:00.0: disp: chid 0 stat 10003360 reason 3
[RESERVED_METHOD] mthd 0d80 data 00000000 code 00000000
nouveau 0000:1f:00.0: DRM: CRC notifier ctx for head 3 not finished
after 50ms
So, fix that.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: c4b27bc868 ("drm/nouveau/kms/nv50-: convert core crc_set_src() to new push macros")
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Commit 2e26ccb119 ("drm/radeon: prefer lower reference dividers")
fixed screen flicker for HP Compaq nx9420 but breaks other laptops like
Asus X50SL.
Turns out we also need to favor lower feedback dividers.
Users confirmed this change fixes the regression and doesn't regress the
original fix.
Fixes: 2e26ccb119 ("drm/radeon: prefer lower reference dividers")
BugLink: https://bugs.launchpad.net/bugs/1791312
BugLink: https://bugs.launchpad.net/bugs/1861554
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On my R9 390, the voltage was reported as a constant 1000 mV.
This was due to a bug in smu7_hwmgr.c, in the smu7_read_sensor()
function, where some magic constants were used in a condition,
to determine whether the voltage should be read from PLANE2_VID
or PLANE1_VID. The VDDC mask was incorrectly used, instead of
the VDDGFX mask.
This patch changes the code to use the correct defined constants
(and apply the correct bitshift), thus resulting in correct voltage reporting.
Signed-off-by: Sandeep Raghuraman <sandy.8925@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Starting in Linux 5.8, the graphics and memory clock frequency were not being
reported for CIK cards. This is a regression, since they were reported correctly
in Linux 5.7.
After investigation, I discovered that the smum_send_msg_to_smc() function,
attempts to call the corresponding get_argument() function of ci_smu_funcs.
However, the get_argument() function is not defined in ci_smu_funcs.
This patch fixes the bug by specifying the correct get_argument() function.
Fixes: a0ec225633 ("drm/amd/powerplay: unified interfaces for message issuing and response checking")
Signed-off-by: Sandeep Raghuraman <sandy.8925@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Normally softwareshutdowntemp should be greater than Thotspotlimit.
However, on some VEGA10 ASIC, the softwareshutdowntemp is 91C while
Thotspotlimit is 105C. This seems not right and may trigger some
false alarms.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
v1:
the C type "unsigned long" size is 32bit on 32bit system,
it will cause code logic error, so replace it with "uint64_t".
v2:
remove duplicate cast operation.
Signed-off-by: Kevin <kevin1.wang@amd.com>
Suggest-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On HDCP disable, clear the repeater bit. This ensures if we connect a
non-repeater sink after a repeater, the bit is in the state we expect.
Fixes: ee5e5e7a5e ("drm/i915: Add HDCP framework + base implementation")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.17+
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200818153910.27894-3-sean@poorly.run
(cherry picked from commit 2cc0c7b520)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
This patch fixes a few bugs:
1- We weren't taking into account sha_leftovers when adding multiple
ksvs to sha_text. As such, we were or'ing the end of ksv[j - 1] with
the beginning of ksv[j]
2- In the sha_leftovers == 2 and sha_leftovers == 3 case, bstatus was
being placed on the wrong half of sha_text, overlapping the leftover
ksv value
3- In the sha_leftovers == 2 case, we need to manually terminate the
byte stream with 0x80 since the hardware doesn't have enough room to
add it after writing M0
The upside is that all of the HDCP supported HDMI repeaters I could
find on Amazon just strip HDCP anyways, so it turns out to be _really_
hard to hit any of these cases without an MST hub, which is not (yet)
supported. Oh, and the sha_leftovers == 1 case works perfectly!
Fixes: ee5e5e7a5e ("drm/i915: Add HDCP framework + base implementation")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.17+
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200818153910.27894-2-sean@poorly.run
(cherry picked from commit 1f0882214f)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Clang warns:
drivers/gpu/drm/i915/display/intel_combo_phy.c:268:3: warning: variable
'ret' is uninitialized when used here [-Wuninitialized]
ret &= check_phy_reg(dev_priv, phy, ICL_PORT_TX_DW8_LN0(phy),
^~~
drivers/gpu/drm/i915/display/intel_combo_phy.c:261:10: note: initialize
the variable 'ret' to silence this warning
bool ret;
^
= 0
1 warning generated.
In practice, the bug this warning appears to be concerned with would not
actually matter because ret gets initialized to the return value of
cnl_verify_procmon_ref_values. However, that does appear to be a bug
since it means the first hunk of the patch this fixes won't actually do
anything (since the values of check_phy_reg won't factor into the final
ret value). Initialize ret to true then make all of the assignments a
bitwise AND with itself so that the function always does what it should
do.
Fixes: 239bef676d ("drm/i915/display: Implement new combo phy initialization step")
Link: https://github.com/ClangBuiltLinux/linux/issues/1094
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200828202830.7165-1-jose.souza@intel.com
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit 2034c2129b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
When going through a disable/enable cycle without changing the
framebuffer the optimization added by commit 3954ff10e0 ("drm/virtio:
skip set_scanout if framebuffer didn't change") causes the screen stay
blank. Add a bool to force an update to fix that.
v2: use drm_atomic_crtc_needs_modeset() (Daniel).
Cc: 1882851@bugs.launchpad.net
Fixes: 3954ff10e0 ("drm/virtio: skip set_scanout if framebuffer didn't change")
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Jiri Slaby <jirislaby@kernel.org>
Tested-by: Diego Viola <diego.viola@gmail.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20200818072511.6745-2-kraxel@redhat.com
(cherry picked from commit 1bc371cd0e)
When going through a disable/enable cycle without changing the
framebuffer the optimization added by commit 3954ff10e0 ("drm/virtio:
skip set_scanout if framebuffer didn't change") causes the screen stay
blank. Add a bool to force an update to fix that.
v2: use drm_atomic_crtc_needs_modeset() (Daniel).
Cc: 1882851@bugs.launchpad.net
Fixes: 3954ff10e0 ("drm/virtio: skip set_scanout if framebuffer didn't change")
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Jiri Slaby <jirislaby@kernel.org>
Tested-by: Diego Viola <diego.viola@gmail.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20200818072511.6745-2-kraxel@redhat.com
The only usage of these is to assign their address to the fbops field in
the fb_info struct, which is a const pointer. Make them const to allow
the compiler to put them in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200830211741.17326-1-rikard.falkeborn@gmail.com
In order to shrink drm_display_mode below the magic two cacheline
mark in 64bit we need to shrink it by another 8 bytes. The easiest
thing to eliminate is the 'export_head' list head which is only
used during the getconnector ioctl to temporarly track which modes
on the connector's mode list are to be exposed and which are to
remain hidden.
We can simply replace the list head with a boolean which we use
to tag the modes that are to be exposed. If we make sure to clear
the tags after we're done with them we don't even need an extra
loop over the modes to reset the tags at the start of the
getconnector ioctl.
Conveniently we already have a hole for the boolean left
behind by the removal of mode->private_flags. The final size
of the struct is now 112 bytes on 32bit and 120 bytes on 64bit.
Another alternative would be a temp bitmask so we wouldn't have
to have anything in the mode struct itself. The main issue is
how large of a bitmask do we need? I guess we could allocate
it dynamically but that means an extra kcalloc() and an extra
loop through the modes to count them first (or grow the bitmask
with krealloc() as needed).
CC: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200428171940.19552-17-ville.syrjala@linux.intel.com
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
For DP MST outputs, the i2c device currently only supports transfers
that can be implemented using remote i2c reads. Such transfers must
consist of zero or more write transactions followed by one read
transaction. DDC/CI commands require standalone write transactions and
hence aren't supported.
Since each remote i2c write is handled as a separate transfer, remote
i2c writes can support transfers consisting of write transactions, where
all but the last have I2C_M_STOP set. According to the DDC/CI 1.1
standard, DDC/CI commands only require a single write or read
transaction in a transfer, so this is sufficient.
For i2c transfers meeting the above criteria, generate and send a remote
i2c write message for each transaction. Add the trivial remote i2c write
reply parsing support so remote i2c write acks bubble up correctly.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/37
Signed-off-by: Sam McNally <sammc@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727160225.1.I4e95a534de051551cd143e6cb83d4c5a9b0ad1cd@changeid
When verify_crc_source() fails, source needs to be freed.
However, current code is returning directly and ends up
leaking memory.
Fixes: d5cc15a0c6 ("drm: crc: Introduce verify_crc_source callback")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[danvet: change Fixes: tag per Laurent's review]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819082228.26847-1-dinghao.liu@zju.edu.cn
Now that we've extracted i915's code for reading both the normal DPCD
caps and extended DPCD caps into a shared helper, let's start using this
in nouveau to enable us to start checking extended DPCD caps for free.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-21-lyude@redhat.com
Since DP 1.3, it's been possible for DP receivers to specify an
additional set of DPCD capabilities, which can take precedence over the
capabilities reported at DP_DPCD_REV.
Basically any device supporting DP is going to need to read these in an
identical manner, in particular nouveau, so let's go ahead and just move
this code out of i915 into a shared DRM DP helper that we can use in
other drivers.
v2:
* Remove redundant dpcd[DP_DPCD_REV] == 0 check
* Fix drm_dp_dpcd_read() ret checks
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-20-lyude@redhat.com
Currently in nouveau_connector_ddc_detect() and
nouveau_connector_detect_lvds(), we start the connector probing process
by releasing the previous EDID and informing DRM of the change. However,
since commit 5186421cbf ("drm: Introduce epoch counter to
drm_connector") drm_connector_update_edid_property() actually checks
whether the new EDID we've specified is different from the previous one,
and updates the connector's epoch accordingly if it is. But, because we
always set the EDID to NULL first in nouveau_connector_ddc_detect() and
nouveau_connector_detect_lvds() we end up making DRM think that the EDID
changes every single time we do a connector probe - which isn't needed.
So, let's fix this by not clearing the EDID at the start of the
connector probing process, and instead simply changing or removing it
once near the end of the probing process. This will help prevent us from
sending unneeded hotplug events to userspace when nothing has actually
changed.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-19-lyude@redhat.com
This is another bit that we never implemented for nouveau: dongle
detection. When a "dongle", e.g. an active display adaptor, is hooked up
to the system and causes an HPD to be fired, we don't actually know
whether or not there's anything plugged into the dongle without checking
the sink count. As a result, plugging in a dongle without anything
plugged into it currently results in a bogus EDID retrieval error in the kernel log.
Additionally, most dongles won't send another long HPD signal if the
user suddenly plugs something in, they'll only send a short HPD IRQ with
the expectation that the source will check the sink count and reprobe
the connector if it's changed - something we don't actually do. As a
result, nothing will happen if the user plugs the dongle in before
plugging something into the dongle.
So, let's fix this by checking the sink count in both
nouveau_dp_probe_dpcd() and nouveau_dp_irq(), and reprobing the
connector if things change.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-18-lyude@redhat.com
And of course, we'll also need to read the sink count from other drivers
as well if we're checking whether or not it's supported. So, let's
extract the code for this into another helper.
v2:
* Fix drm_dp_dpcd_readb() ret check
* Add back comment and move back sink_count assignment in intel_dp_get_dpcd()
v5:
* Change name from drm_dp_get_sink_count() to drm_dp_read_sink_count()
* Also, add "See also:" section to kdocs
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-17-lyude@redhat.com
Since other drivers are also going to need to be aware of the sink count
in order to do proper dongle detection, we might as well steal i915's
DP_SINK_COUNT helpers and move them into DRM helpers so that other
dirvers can use them as well.
Note that this also starts using intel_dp_has_sink_count() in
intel_dp_detect_dpcd(), which is a functional change.
v5:
* Change name from drm_dp_has_sink_count() to
drm_dp_read_sink_count_cap()
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-16-lyude@redhat.com
This adds support for querying the maximum clock rate of a downstream
port on a DisplayPort connection. Generally, downstream ports refer to
active dongles which can have their own pixel clock limits.
Note as well, we also start marking the connector as disconnected if we
can't read the DPCD, since we wouldn't be able to do anything without
DPCD access anyway.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-15-lyude@redhat.com
We're going to be doing the same probing process in nouveau for
determining downstream DP port capabilities, so let's deduplicate the
work by moving i915's code for handling this into a shared helper:
drm_dp_read_downstream_info().
Note that when we do this, we also do make some functional changes while
we're at it:
* We always clear the downstream port info before trying to read it,
just to make things easier for the caller
* We skip reading downstream port info if the DPCD indicates that we
don't support downstream port info
* We only read as many bytes as needed for the reported number of
downstream ports, no sense in reading the whole thing every time
v2:
* Fixup logic for calculating the downstream port length to account for
the fact that downstream port caps can be either 1 byte or 4 bytes
long. We can actually skip fixing the max_clock/max_bpc helpers here
since they all check for DP_DETAILED_CAP_INFO_AVAILABLE anyway.
* Fix ret code check for drm_dp_dpcd_read
v5:
* Change name from drm_dp_downstream_read_info() to
drm_dp_read_downstream_info()
* Also, add "See Also" sections for the various downstream info
functions (drm_dp_read_downstream_info(), drm_dp_downstream_max_clock(),
drm_dp_downstream_max_bpc())
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-14-lyude@redhat.com
Currently we perform both short IRQ handling for DP, and connector
reprobing in the HPD IRQ handler. However since we need to grab
connection_mutex in order to reprobe a connector, in theory we could
accidentally block ourselves from handling any short IRQs until after a
modeset completes if a connector hotplug happens to occur in parallel
with a modeset.
I haven't seen this actually happen yet, but since we're cleaning up
nouveau's hotplug handling code anyway and we already have a hpd worker,
we can simply fix this by only relying on the HPD worker to actually
reprobe connectors when we receive a HPD IRQ. We also add a mask to
nouveau_drm to keep track of which connectors are waiting to be reprobed
in response to an HPD IRQ.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-13-lyude@redhat.com
For whatever reason we currently unset the EDID for DP CEC support when
responding to the connector being unplugged, instead of just doing it in
nouveau_connector_detect() where we set the CEC EDID. This isn't really
needed and could even potentially cause us to forget to unset the EDID
if the connector is removed without a corresponding hpd event, so let's
fix that.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-12-lyude@redhat.com
Just a tiny drive-by cleanup, we can consolidate i915's code for
checking for MST support into a helper to be shared across drivers.
v5:
* Drop !!()
* Move drm_dp_has_mst() out of header
* Change name from drm_dp_has_mst() to drm_dp_read_mst_cap()
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-10-lyude@redhat.com
First some backstory here: Currently, we keep track of whether or not
we've enabled MST or not by trying to piggy-back off the MST helpers.
This means that in order to check whether MST is enabled or not, we
actually need to grab drm_dp_mst_topology_mgr.lock.
Back when I originally wrote this, I did this piggy-backing with the
intention that I'd eventually be teaching our MST helpers how to recover
when an MST device has stopped responding, which in turn would require
the MST helpers having a way of disabling MST independently of the
driver. Note that this was before I reworked locking in the MST helpers,
so at the time we were sticking random things under &mgr->lock - which
grabbing this lock was meant to protect against.
This never came to fruition because doing such a reset safely turned out
to be a lot more painful and impossible then it sounds, and also just
risks us working around issues with our MST handlers that should be
properly fixed instead. Even if it did though, simply calling
drm_dp_mst_topology_mgr_set_mst() from the MST helpers (with the
exception of when we're tearing down our MST managers, that's always OK)
wouldn't have been a bad idea, since drivers like nouveau and i915 need
to do their own book keeping immediately after disabling MST.
So-implementing that would likely require adding a hook for
helper-triggered MST disables anyway.
So, fast forward to now - we want to start adding support for all of the
miscellaneous bits of the DP protocol (for both SST and MST) we're
missing before moving on to supporting more complicated features like
supporting different BPP values on MST, DSC, etc. Since many of these
features only exist on SST and make use of DP HPD IRQs, we want to be
able to atomically check whether we're servicing an MST IRQ or SST IRQ
in nouveau_connector_hotplug(). Currently we literally don't do this at
all, and just handle any kind of possible DP IRQ we could get including
ESIs - even if MST isn't actually enabled.
This would be very complicated and difficult to fix if we need to hold
&mgr->lock while handling SST IRQs to ensure that the MST topology
state doesn't change under us. What we really want here is to do our own
tracking of whether MST is enabled or not, similar to drivers like i915,
and define our own locking order to decomplicate things and avoid
hitting locking issues in the future.
So, let's do this by refactoring our MST probing/enabling code to use
our own MST bookkeeping, along with adding a lock for protecting DP
state that needs to be checked outside of our connector probing
functions. While we're at it, we also remove a bunch of unneeded steps
we perform when probing/enabling MST:
* Enabling bits in MSTM_CTRL before calling drm_dp_mst_topology_mgr_set_mst().
I don't think these ever actually did anything, since the nvif methods
for enabling MST don't actually do anything DPCD related and merely
indicate to nvkm that we've turned on MST.
* Checking the MSTM_CTRL bit is intact when checking the state of an
enabled MST topology in nv50_mstm_detect(). I just added this to be safe
originally, but now that we try reading the DPCD when probing DP
connectors it shouldn't be needed as that will abort our hotplug probing
if the device was removed well before we start checking for MST..
* All of the duplicate DPCD version checks.
This leaves us with much nicer looking code, a much more sensible
locking scheme, and an easy way of checking whether MST is enabled or
not for handling DP HPD IRQs.
v2:
* Get rid of accidental newlines
v4:
* Fix uninitialized usage of mstm in nv50_mstm_detect() - thanks kernel
bot!
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-9-lyude@redhat.com
While the way we find the associated connector for an encoder is just
fine for legacy modesetting, it's not correct for nv50+ since that uses
atomic modesetting. For reference, see the drm_encoder kdocs.
Fix this by removing nouveau_encoder_connector_get(), and replacing it
with nv04_encoder_get_connector(), nv50_outp_get_old_connector(), and
nv50_outp_get_new_connector().
v2:
* Don't line-wrap for_each_(old|new)_connector_in_state in
nv50_outp_get_(old|new)_connector() - sravn
v3:
* Fix potential uninitialized usage of nv_connector (needs to be
initialized to NULL at the start). Thanks kernel test robot!
v4:
* Actually fix uninitialized nv_connector usage in
nv50_audio_component_get_eld(). The previous fix wouldn't have worked
since we would have started out with nv_connector == NULL, but
wouldn't clear it after a single drm_for_each_encoder() iteration.
Thanks again Kernel bot!
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-7-lyude@redhat.com
Since commit fa3cdf8d0b ("drm/nouveau: Reset MST branching unit before
enabling") we've been clearing DP_MST_CTRL before we start enabling MST.
Since then clearing DP_MST_CTRL in nv50_mstm_new() has been unnecessary
and redundant, so let's remove it.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-6-lyude@redhat.com
Noticed this while going through our DP code - we use an open-coded
version of drm_dp_read_desc() instead of just using the helper, so
change that. This will also let us use quirks in the future if we end up
needing them.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-3-lyude@redhat.com
Add support for reporting GPU reset events through SMI. KFD
would report both pre and post GPU reset events.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's writing too much data. regmap_bulk_write expects number of
register sized chunks to write, not a byte sized length of the
bounce buffer. Bounce buffer needs to be padded too, so that
regmap_bulk_write will not read past the end of the buffer.
Fixes: 133add5b5a ("drm/sun4i: Add Allwinner A31 MIPI-DSI controller support")
Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200828125032.937148-1-megous@megous.com
Even if support for the IPU was compiled in, we may run on a device
(e.g. the Qi LB60) where the IPU is not available, or simply with an old
devicetree without the IPU node. In that case the ingenic-drm refused to
probe.
Fix the driver so that it will probe even if the IPU node is not present
in devicetree (but then IPU support is disabled of course).
v2: Take a different approach
Fixes: fc1acf317b ("drm/ingenic: Add support for the IPU")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200827114404.36748-2-paul@crapouillou.net
The VKMS blend function was ignoring the alpha channel and just
overwriting vaddr_src with vaddr_dst. This XRGB approach triggers a
warning when running the kms_cursor_crc/cursor-alpha-transparent test
case. In IGT, cairo_format_argb32 uses premultiplied alpha (according to
documentation). Also current DRM assumption is that alpha is
premultiplied. Therefore, this patch considers premultiplied alpha
blending eq to compose vaddr_src with vaddr_dst.
This change removes the following cursor-alpha-transparent warning:
"Suspicious CRC: All values are 0."
V2:
- static for local functions
- const for the read-only variable argb_src
- replaces variable names
- drops unnecessary comment
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Reviewed-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200825114532.abzdooluny2ekzvm@smtp.gmail.com
The OrtusTech COM43H4M85ULC panel is a 18-bit RGB panel. Commit
f098f168e9 ("drm: panel: Fix bus format for OrtusTech COM43H4M85ULC
panel") has fixed the bus formats, but forgot to address the bpc value.
Set it to 6.
Fixes: f098f168e9 ("drm: panel: Fix bus format for OrtusTech COM43H4M85ULC panel")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200824003254.21904-1-laurent.pinchart@ideasonboard.com
DSI end-points are supposed to be at node 0 and node 1 as per binding.
So fix this and use node 0 and node 1 for dsi.
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: 23278bf54a ("drm/bridge: Introduce LT9611 DSI to HDMI bridge")
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200828074251.3788165-1-vkoul@kernel.org
Clang warns:
drivers/gpu/drm/i915/display/intel_combo_phy.c:268:3: warning: variable
'ret' is uninitialized when used here [-Wuninitialized]
ret &= check_phy_reg(dev_priv, phy, ICL_PORT_TX_DW8_LN0(phy),
^~~
drivers/gpu/drm/i915/display/intel_combo_phy.c:261:10: note: initialize
the variable 'ret' to silence this warning
bool ret;
^
= 0
1 warning generated.
In practice, the bug this warning appears to be concerned with would not
actually matter because ret gets initialized to the return value of
cnl_verify_procmon_ref_values. However, that does appear to be a bug
since it means the first hunk of the patch this fixes won't actually do
anything (since the values of check_phy_reg won't factor into the final
ret value). Initialize ret to true then make all of the assignments a
bitwise AND with itself so that the function always does what it should
do.
Fixes: 239bef676d ("drm/i915/display: Implement new combo phy initialization step")
Link: https://github.com/ClangBuiltLinux/linux/issues/1094
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200828202830.7165-1-jose.souza@intel.com
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Fixes below compiler warnings:
CC [M] drivers/gpu/drm/amd/amdgpu/amdgpu_device.o
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:381:1: warning: ‘static’ is not at beginning of declaration [-Wold-style-declaration]
381 | void static inline amdgpu_mm_wreg_mmio(struct amdgpu_device *adev, uint32_t reg, uint32_t v, uint32_t acc_flags)
| ^~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:381:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration]
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c: In function ‘amdgpu_device_fini’:
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:3381:6: warning: variable ‘r’ set but not used [-Wunused-but-set-variable]
3381 | int r;
| ^
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reusing icl_get_combo_buf_trans() for eDP was causing the wrong table
being used when the eDP port don't support low power voltage swing table.
v2: Only use icl_combo_phy_ddi_translations_edp_hbr3 if low_vswing is
set as EHL combo phy supports HBR3 (Matt R)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Cc: Lee Shawn C <shawn.c.lee@intel.com>
Cc: Khaled Almahallawy <khaled.almahallawy@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826201549.83658-2-jose.souza@intel.com
Reusing icl_get_combo_buf_trans() for eDP was causing the wrong table
being used when the eDP port don't support low power voltage swing table.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Cc: Lee Shawn C <shawn.c.lee@intel.com>
Cc: Khaled Almahallawy <khaled.almahallawy@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826201549.83658-1-jose.souza@intel.com
TGL made stepping a litte mess, workarounds refer to the stepping of
the IP(GT or Display) not of the GPU stepping so it would already
require the same solution as used in commit 96c5a15f9f
("drm/i915/kbl: Fix revision ID checks").
But to make things even more messy it have a different IP stepping
mapping between SKUs and the same stepping revision of GT do not match
the same HW between TGL U/Y and regular TGL.
So it was required to have 2 different macros to check GT WAs while
for Display we are able to use just one macro that uses the right
revids table.
All TGL workarounds checked and updated accordingly.
v2:
- removed TODO to check if WA 14010919138 applies to regular TGL.
- fixed display stepping in regular TGL (Anusha)
BSpec: 52890
BSpec: 55378
BSpec: 44455
Reviewed-by: Anusha Srivatsa <anusha.srivtsa@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Penne Lee <penne.y.lee@intel.com>
Cc: Guangyao Bai <guangyao.bai@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200827233943.400946-1-jose.souza@intel.com
core:
- Take modeset bkl for legacy drivers.
dp_mst:
- Allow null crtc in dp_mst.
i915:
- Fix command parser desc matching with masks
amdgpu:
- Misc display fixes
- Backlight fixes
- MPO fix for DCN1
- Fixes for Sienna Cichlid
- Fixes for Navy Flounder
- Vega SW CTF fixes
- SMU fix for Raven
- Fix a possible overflow in INFO ioctl
- Gfx10 clockgating fix
msm:
- opp/bw scaling patch followup
- frequency restoring fux
- vblank in atomic commit fix
- dpu modesetting fixes
- fencing fix
etnaviv:
- scheduler interaction fix
- gpu init regression fix
exynos:
- Just drop __iommu annotation to fix sparse warning.
omap:
- locking state fix.
-----BEGIN PGP SIGNATURE-----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=ZmIT
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2020-08-28' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"As expected a bit of an rc3 uptick, amdgpu and msm are the main ones,
one msm patch was from the merge window, but had dependencies and we
dropped it until the other tree had landed. Otherwise it's a couple of
fixes for core, and etnaviv, and single i915, exynos, omap fixes.
I'm still tracking the Sandybridge gpu relocations issue, if we don't
see much movement I might just queue up the reverts. I'll talk to
Daniel next week once he's back from holidays.
core:
- Take modeset bkl for legacy drivers
dp_mst:
- Allow null crtc in dp_mst
i915:
- Fix command parser desc matching with masks
amdgpu:
- Misc display fixes
- Backlight fixes
- MPO fix for DCN1
- Fixes for Sienna Cichlid
- Fixes for Navy Flounder
- Vega SW CTF fixes
- SMU fix for Raven
- Fix a possible overflow in INFO ioctl
- Gfx10 clockgating fix
msm:
- opp/bw scaling patch followup
- frequency restoring fux
- vblank in atomic commit fix
- dpu modesetting fixes
- fencing fix
etnaviv:
- scheduler interaction fix
- gpu init regression fix
exynos:
- Just drop __iommu annotation to fix sparse warning
omap:
- locking state fix"
* tag 'drm-fixes-2020-08-28' of git://anongit.freedesktop.org/drm/drm: (41 commits)
drm/amd/display: Fix memleak in amdgpu_dm_mode_config_init
drm/amdgpu: disable runtime pm for navy_flounder
drm/amd/display: Retry AUX write when fail occurs
drm/amdgpu: Fix buffer overflow in INFO ioctl
drm/amd/powerplay: Fix hardmins not being sent to SMU for RV
drm/amdgpu: use MODE1 reset for navy_flounder by default
drm/amd/pm: correct the thermal alert temperature limit settings
drm/amdgpu: add asd fw check before loading asd
drm/amd/display: Keep current gain when ABM disable immediately
drm/amd/display: Fix passive dongle mistaken as active dongle in EDID emulation
drm/amd/display: Revert HDCP disable sequence change
drm/amd/display: Send DISPLAY_OFF after power down on boot
drm/amdgpu/gfx10: refine mgcg setting
drm/amd/pm: correct Vega20 swctf limit setting
drm/amd/pm: correct Vega12 swctf limit setting
drm/amd/pm: correct Vega10 swctf limit setting
drm/amd/pm: set VCN pg per instances
drm/amd/pm: enable run_btc callback for sienna_cichlid
drivers: gpu: amd: Initialize amdgpu_dm_backlight_caps object to 0 in amdgpu_dm_update_backlight_caps
drm/amd/display: Reject overlay plane configurations in multi-display scenarios
...
With the split of MIPI calibration into tegra_mipi_calibrate() and
tegra_mipi_wait(), MIPI clock is not kept enabled and mutex is not locked
till the calibration is done.
So, this patch keeps MIPI clock enabled and mutex locked after triggering
start of calibration till its done.
To let calibration process go through its finite sequence codes before
calibration logic waiting for pads idle state added wait time of 75usec
to make sure it sees idle state to apply the results.
This patch renames tegra_mipi_calibrate() as tegra_mipi_start_calibration()
and tegra_mipi_wait() as tegra_mipi_finish_calibration() to be inline
with their usage.
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
- Introduce a mechanism to extend execbuf2 (Lionel)
- Add syncobj timeline support (Lionel)
Driver Changes:
- Limit stolen mem usage on the compressed frame buffer (Ville)
- Some clean-up around display's cdclk (Ville)
- Some DDI changes for better DP link training according
to spec (Imre)
- Provide the perf pmu.module (Chris)
- Remove dobious Valleyview PCI IDs (Alexei)
- Add new display power saving feature for gen12+ called
HOBL (Jose)
- Move SKL's clock gating w/a to skl_init_clock_gating() (Ville)
- Rocket Lake display additions (Matt)
- Selftest: temporarily downgrade on severity of frequency
scaling tests (Chris)
- Introduce a new display workaround for fixing FLR related
issues on new PCH. (Jose)
- Temporarily disable FBC on TGL. It was the culprit of random
underruns. (Uma).
- Copy default modparams to mock i915_device (Chris)
- Add compiler paranoia for checking HWSP values (Chris)
- Remove useless gen check before calling intel_rps_boost (Chris)
- Fix a null pointer dereference (Chris)
- Add a couple of missing i915_active_fini() (Chris)
- Update TGL display power's bw_buddy table according to
update spec (Matt)
- Fix couple wrong return values (Tianjia)
- Selftest: Avoid passing random 0 into ilog2 (George)
- Many Tiger Lake display fixes and improvements for Type-C and
DP compliance (Imre, Jose)
- Start the addition of PSR2 selective fetch (Jose)
- Update a few DMC and HuC firmware versions (Jose)
- Add gen11+ w/a to fix underuns (Matt)
- Fix cmd parser desc matching with mask (Mika)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAl9EBoQACgkQ+mJfZA7r
E8qNIgf9E3t12hq0z+8SidMyUPXCz6+BJzed+zjF6q6w3lVaxloQbJbQc/ujec6Y
DcnHKdZWN4/BjPtO9PYsOo7JRPlw9mounMfMqhmsgCNigpy8jdE6EQB2wDY/JtWG
I/OmVwaIDWF/srRJZNJlmdx1IT6pes3A/1HBJmJWFFPFFQxl6Y8vbaZGmMDwXRzS
6/LOy7otXVGvSHqYDFzNWBPNRstUYmQuPbE4/Iei3zbS8Di3uCkspa6LbocE+T5g
cokw9fxE1cJv9bIhIY65R611XyzqqHDzM+2s3x35r8a/ectItLE7kkU07/X3RXmc
lrqf4xxzmg+lvbKaLMGdI7YRFPcvbQ==
=cGnK
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2020-08-24-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
UAPI Changes:
- Introduce a mechanism to extend execbuf2 (Lionel)
- Add syncobj timeline support (Lionel)
Driver Changes:
- Limit stolen mem usage on the compressed frame buffer (Ville)
- Some clean-up around display's cdclk (Ville)
- Some DDI changes for better DP link training according
to spec (Imre)
- Provide the perf pmu.module (Chris)
- Remove dobious Valleyview PCI IDs (Alexei)
- Add new display power saving feature for gen12+ called
HOBL (Jose)
- Move SKL's clock gating w/a to skl_init_clock_gating() (Ville)
- Rocket Lake display additions (Matt)
- Selftest: temporarily downgrade on severity of frequency
scaling tests (Chris)
- Introduce a new display workaround for fixing FLR related
issues on new PCH. (Jose)
- Temporarily disable FBC on TGL. It was the culprit of random
underruns. (Uma).
- Copy default modparams to mock i915_device (Chris)
- Add compiler paranoia for checking HWSP values (Chris)
- Remove useless gen check before calling intel_rps_boost (Chris)
- Fix a null pointer dereference (Chris)
- Add a couple of missing i915_active_fini() (Chris)
- Update TGL display power's bw_buddy table according to
update spec (Matt)
- Fix couple wrong return values (Tianjia)
- Selftest: Avoid passing random 0 into ilog2 (George)
- Many Tiger Lake display fixes and improvements for Type-C and
DP compliance (Imre, Jose)
- Start the addition of PSR2 selective fetch (Jose)
- Update a few DMC and HuC firmware versions (Jose)
- Add gen11+ w/a to fix underuns (Matt)
- Fix cmd parser desc matching with mask (Mika)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826232733.GA129053@intel.com
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- ttm: various cleanups and reworks of the API
Driver Changes:
- ast: various cleanups
- gma500: A few fixes, conversion to GPIOd API
- hisilicon: Change of maintainer, various reworks
- ingenic: Clock handling and formats support improvements
- mcde: improvements to the DSI support
- mgag200: Support G200 desktop cards
- mxsfb: Support the i.MX7 and i.MX8M and the alpha plane
- panfrost: support devfreq
- ps8640: Retrieve the EDID from eDP control, misc improvements
- tidss: Add a workaround for AM65xx YUV formats handling
- virtio: a few cleanups, support for virtio-gpu exported resources
- bridges: Support the chained bridges on more drivers,
new bridges: Toshiba TC358762, Toshiba TC358775, Lontium LT9611
- panels: Convert to dev_ based logging, read orientation from the DT,
various fixes, new panels: Mantix MLAF057WE51-X, Chefree CH101OLHLWH-002,
Powertip PH800480T013, KingDisplay KD116N21-30NV-A010
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCX0fXGwAKCRDj7w1vZxhR
xTmMAQDPmfSsBLLNnDxu4++zFrQ7OKmNSHCkVr4nAQ/yg3GVPQEAuRw6qPwPWuV3
+jEPxaQSSmHOhx/jXfolV1tJaE/FHgA=
=WYoO
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2020-08-27' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.10:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- ttm: various cleanups and reworks of the API
Driver Changes:
- ast: various cleanups
- gma500: A few fixes, conversion to GPIOd API
- hisilicon: Change of maintainer, various reworks
- ingenic: Clock handling and formats support improvements
- mcde: improvements to the DSI support
- mgag200: Support G200 desktop cards
- mxsfb: Support the i.MX7 and i.MX8M and the alpha plane
- panfrost: support devfreq
- ps8640: Retrieve the EDID from eDP control, misc improvements
- tidss: Add a workaround for AM65xx YUV formats handling
- virtio: a few cleanups, support for virtio-gpu exported resources
- bridges: Support the chained bridges on more drivers,
new bridges: Toshiba TC358762, Toshiba TC358775, Lontium LT9611
- panels: Convert to dev_ based logging, read orientation from the DT,
various fixes, new panels: Mantix MLAF057WE51-X, Chefree CH101OLHLWH-002,
Powertip PH800480T013, KingDisplay KD116N21-30NV-A010
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200827155517.do6emeacetpturli@gilmour.lan
For current mediatek dsi encoder, its possible crtc is fixed in crtc
0, and mediatek dpi encoder's possible crtc is fixed in crtc 1. In
some SoC the possible crtc is not fixed in this case, so search
pipeline information to find out the correct possible crtc.
Signed-off-by: Stu Hsieh <stu.hsieh@mediatek.com>
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Supported and enabled are different things so printing both.
v3: using drrs->type instead of vbt.drrs_type
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Srinivas K <srinivasx.k@intel.com>
Cc: Hariom Pandey <hariom.pandey@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200825171331.17971-3-jose.souza@intel.com
DRRS and PSR can't be enable together, so giving preference to PSR
as it allows more power-savings by complete shutting down display,
so to guarantee this, it should compute DRRS state after compute PSR.
Cc: Srinivas K <srinivasx.k@intel.com>
Cc: Hariom Pandey <hariom.pandey@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200825171331.17971-1-jose.souza@intel.com
If sun8i_r40_tcon_tv_set_mux() succeed, sun8i_r40_tcon_tv_set_mux()
doesn't have a corresponding put_device(). Thus add put_device()
to fix the exception handling for this function implementation.
Fixes: 0305189afb ("drm/sun4i: tcon: Add support for R40 TCON")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826010826.1785487-1-yukuai3@huawei.com
The LVDS controller can invert the polarity / lanes of the LVDS output.
The default polarity causes some issues on some panels.
However, U-Boot has always used the opposite polarity without any reported
issue, and the only currently supported LVDS panel in-tree (the TBS A711)
seems to be able to work with both settings.
Let's just use the same polarity than U-Boot to be more consistent and
hopefully support all the panels.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Cc: Ondrej Jirman <megous@megous.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200704133803.37330-1-maxime@cerno.tech
Commit 2e26ccb119 ("drm/radeon: prefer lower reference dividers")
fixed screen flicker for HP Compaq nx9420 but breaks other laptops like
Asus X50SL.
Turns out we also need to favor lower feedback dividers.
Users confirmed this change fixes the regression and doesn't regress the
original fix.
Fixes: 2e26ccb119 ("drm/radeon: prefer lower reference dividers")
BugLink: https://bugs.launchpad.net/bugs/1791312
BugLink: https://bugs.launchpad.net/bugs/1861554
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On my R9 390, the voltage was reported as a constant 1000 mV.
This was due to a bug in smu7_hwmgr.c, in the smu7_read_sensor()
function, where some magic constants were used in a condition,
to determine whether the voltage should be read from PLANE2_VID
or PLANE1_VID. The VDDC mask was incorrectly used, instead of
the VDDGFX mask.
This patch changes the code to use the correct defined constants
(and apply the correct bitshift), thus resulting in correct voltage reporting.
Signed-off-by: Sandeep Raghuraman <sandy.8925@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Starting in Linux 5.8, the graphics and memory clock frequency were not being
reported for CIK cards. This is a regression, since they were reported correctly
in Linux 5.7.
After investigation, I discovered that the smum_send_msg_to_smc() function,
attempts to call the corresponding get_argument() function of ci_smu_funcs.
However, the get_argument() function is not defined in ci_smu_funcs.
This patch fixes the bug by specifying the correct get_argument() function.
Fixes: a0ec225633 ("drm/amd/powerplay: unified interfaces for message issuing and response checking")
Signed-off-by: Sandeep Raghuraman <sandy.8925@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Optimize code to iterate less loops in
amdgpu_device_ip_reinit_early_sriov()
Signed-off-by: Jiawei <Jiawei.Gu@amd.com>
Reviewed-by: Emily.Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Normally softwareshutdowntemp should be greater than Thotspotlimit.
However, on some VEGA10 ASIC, the softwareshutdowntemp is 91C while
Thotspotlimit is 105C. This seems not right and may trigger some
false alarms.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1:
the C type "unsigned long" size is 32bit on 32bit system,
it will cause code logic error, so replace it with "uint64_t".
v2:
remove duplicate cast operation.
Signed-off-by: Kevin <kevin1.wang@amd.com>
Suggest-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some fixes for v5.9 plus the one opp/bandwidth scaling patch ("drm:
msm: a6xx: use dev_pm_opp_set_bw to scale DDR") which was not included
in the initial pull due to dependency on patch landing thru OPP tree
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <CAF6AEGt45A4ObyhEdC5Ga4f4cAf-NBSVRECu7df3Gh6-X4G3tQ@mail.gmail.com
Two fixes:
One fixes a bad interaction with the DRM scheduler, leading to some dma
fences not getting signalled after hitting the job timeout. The other
one fixes a GPU init regression, as apparently one old core doesn't
likes us reading some of the identification registers.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/aceebfe3af636346f5252bdf727cdd988bdcbdf2.camel@pengutronix.de
on BPi-R2/mt7623 main-path have to be routed to DPI0 (hdmi) instead of DSI0
using compatible "mt7623-mmsys" already defined in dts
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
horizontal_backporch_byte should be hbp * bpp - hbp extra bytes.
So remove the wrong subtraction 10.
Fixes: 7a5bc4e22e ("drm/mediatek: change the dsi phytiming calculate method")
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
When resetting EDC related register, all CUs needs to be visited,
otherwise, garbage data from EDC register of missed SEs would present.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When amdgpu_display_modeset_create_props() fails, state and
state->context should be freed to prevent memleak. It's the
same when amdgpu_dm_audio_init() fails.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In dm_dp_aux_transfer() now, we forget to handle AUX_WR fail cases. We
suppose every write wil get done successfully and hence some AUX
commands might not sent out indeed.
[How]
Check if AUX_WR success. If not, retry it.
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The values for "se_num" and "sh_num" come from the user in the ioctl.
They can be in the 0-255 range but if they're more than
AMDGPU_GFX_MAX_SE (4) or AMDGPU_GFX_MAX_SH_PER_SE (2) then it results in
an out of bounds read.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Virtual display is non-atomic so report false to avoid checking
atomic state and other atomic things at runtime.
v2: squash into the sr-iov check
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DC uses these to raise the voltage as needed for higher dispclk/dppclk
and to ensure that we have enough bandwidth to drive the displays.
There's a bug preventing these from actuially sending messages since
it's checking the actual clock (which is 0) instead of the incoming
clock (which shouldn't be 0) when deciding to send the hardmin.
[How]
Check the clocks != 0 instead of the actual clocks.
Fixes: 9ed9203c3e ("drm/amd/powerplay: rv dal-pplib interface refactor powerplay part")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The ctx->features are new RAS implementation which
is only available for Vega20 and onwards, it is not
available for vega10, vega10 should follow legacy
ECC implementation.
Changed from V1:
wrap function to initialize kfd node properties
Changed from V2:
remove wrap function and SDMA SRAM ECC check
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Do the maths in celsius degree. This can fix the issues caused
by the changes below:
drm/amd/pm: correct Vega20 swctf limit setting
drm/amd/pm: correct Vega12 swctf limit setting
drm/amd/pm: correct Vega10 swctf limit setting
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
asd is not ready for some ASICs in early stage, and psp->asd_fw is more generic than ASIC name in the check.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows us to add asic specific workarounds for atom
asic init while keeping the adev specifics out of the
atombios parser code.
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to restore some registers prior to running asic
init to work around a firmware bug.
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This callback can be used by asics that need to
do something special prior to calling atom asic init.
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Properly define this register using a relative offset rather
than an absolute offset and use the proper SOC15 macros to
access it. It's also DCN, not DCE, so remove it from the
DCE12 header.
No functional change.
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dpcs reg are missing for dcn3 link encoder regs list, so add them.
Also remove
DPCSTX_DEBUG_CONFIG and RDPCSTX_DEBUG_CONFIG as they are unused and
cause compile errors for dcn3
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to use a function pointer because the implementation is not
ASIC-specific.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to use a function pointer because the implementation is not
ASIC-specific. This fixes missing support due to a missing function
pointer on Arcturus.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove duplicate semicolons at the end of line.
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When system enters s3/s0i3, backlight PWM would set user level.
[How]
ABM disable function add keep current gain to avoid it.
Signed-off-by: Brandon Syu <Brandon.Syu@amd.com>
Reviewed-by: Josip Pavic <Josip.Pavic@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
dongle_type is set during dongle connection but for passive dongles,
dongle_type is not set. If user starts with an active dongle and
then switches to a passive dongle, it will still report as an active
dongle. Trying to emulate the wrong connecter type results in display
not lighting up.
[How]
Set dpcd_caps.dongle_type for passive dongles in detect_dp().
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Need a tool to retrigger a virtual hotplug for testing purposes with
force redetection in both DC and DM.
[how]
Emulate handle_hpd_irq for connector as if usermode would trigger
a hotplug. Perform DC link discovery, DM connector update, and
DM force atomic commit.
In order to trigger HPD on the connector user needs to echo 1 into
"trigger_hotplug" debugfs entry on its respective connector.
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
Useful entry to understand if link has DSC or FEC capabilities,
implemented to read DPCD caps stored on the link. Better than
manually reading the registers with aux dpcd helper.
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Revert HDCP disable sequence change that blanks stream before
disabling HDCP. PSP and HW teams are currently investigating the
root cause of why HDCP cannot be disabled before stream blank,
which is expected to work without issues.
Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Current function excludes the logic to generate H14b-VSIF. Now it
constructs HF-VSIF only and causes HDMI compliace test fail.
[How]
According to HDMI spec, source devices shall utilize the H14b-VSIF
whenever the signaling capabilities of the H14b-VSIF allow this.
Here keep the logic for HF-VSIF and add H14b-VSIF construction part.
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If DMUB is used, LVTMA VBIOS call can be used to control eDP instead
of tranditional transmitter control. Interface is agreed with VBIOS
for eDP to use this new path to program LVTMA registers.
[How]
Expose DAL interface to send DMUB command for LVTMA control that VBIOS
currently uses.
Signed-off-by: Chris Park <Chris.Park@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
update_clocks might not be called on headless adapters. This means
DISPLAY_OFF may not be sent in headless cases.
[HOW]
If hardware is powered down on boot because it is headless (mode set
does not happen on that adapter) also send DISPLAY_OFF notification.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We still have a few iommu issues which need to address, so force raven
as "dgpu" path for the moment.
This is to add the fallback path to bypass IOMMU if IOMMU v2 is disabled
or ACPI CRAT table not correct.
v2: Use ignore_crat parameter to decide whether it will go with IOMMUv2.
v3: Align with existed thunk, don't change the way of raven, only renoir
will use "dgpu" path by default.
v4: don't update global ignore_crat in the driver, and revise fallback
function if CRAT is broken.
v5: refine acpi crat good but no iommu support case, and rename the
title.
v6: fix the issue of dGPU initialized firstly, just modify the report
value in the node_show().
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Correct the Vega20 thermal swctf limit.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Correct the Vega12 thermal swctf limit.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Correct the Vega10 thermal swctf limit.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1267
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
a) Embed struct drm_device into struct amdgpu_device.
b) Modify the inline-f drm_to_adev() accordingly.
c) Modify the inline-f adev_to_drm() accordingly.
d) Eliminate the use of drm_device.dev_private,
in amdgpu.
e) Switch from using drm_dev_alloc() to
drm_dev_init().
f) Add a DRM driver release function, which frees
the container amdgpu_device after all krefs on
the contained drm_device have been released.
v2: Split out adding adev_to_drm() into its own
patch (previous commit), making this patch
more succinct and clear. More detailed commit
description.
v3: squash in fix to call drmm_add_final_kfree()
to avoid a warning.
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When amdgpu_display_modeset_create_props() fails, state and
state->context should be freed to prevent memleak. It's the
same when amdgpu_dm_audio_init() fails.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In dm_dp_aux_transfer() now, we forget to handle AUX_WR fail cases. We
suppose every write wil get done successfully and hence some AUX
commands might not sent out indeed.
[How]
Check if AUX_WR success. If not, retry it.
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The values for "se_num" and "sh_num" come from the user in the ioctl.
They can be in the 0-255 range but if they're more than
AMDGPU_GFX_MAX_SE (4) or AMDGPU_GFX_MAX_SH_PER_SE (2) then it results in
an out of bounds read.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
DC uses these to raise the voltage as needed for higher dispclk/dppclk
and to ensure that we have enough bandwidth to drive the displays.
There's a bug preventing these from actuially sending messages since
it's checking the actual clock (which is 0) instead of the incoming
clock (which shouldn't be 0) when deciding to send the hardmin.
[How]
Check the clocks != 0 instead of the actual clocks.
Fixes: 9ed9203c3e ("drm/amd/powerplay: rv dal-pplib interface refactor powerplay part")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Do the maths in celsius degree. This can fix the issues caused
by the changes below:
drm/amd/pm: correct Vega20 swctf limit setting
drm/amd/pm: correct Vega12 swctf limit setting
drm/amd/pm: correct Vega10 swctf limit setting
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
asd is not ready for some ASICs in early stage, and psp->asd_fw is more generic than ASIC name in the check.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When system enters s3/s0i3, backlight PWM would set user level.
[How]
ABM disable function add keep current gain to avoid it.
Signed-off-by: Brandon Syu <Brandon.Syu@amd.com>
Reviewed-by: Josip Pavic <Josip.Pavic@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
dongle_type is set during dongle connection but for passive dongles,
dongle_type is not set. If user starts with an active dongle and
then switches to a passive dongle, it will still report as an active
dongle. Trying to emulate the wrong connecter type results in display
not lighting up.
[How]
Set dpcd_caps.dongle_type for passive dongles in detect_dp().
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Revert HDCP disable sequence change that blanks stream before
disabling HDCP. PSP and HW teams are currently investigating the
root cause of why HDCP cannot be disabled before stream blank,
which is expected to work without issues.
Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
update_clocks might not be called on headless adapters. This means
DISPLAY_OFF may not be sent in headless cases.
[HOW]
If hardware is powered down on boot because it is headless (mode set
does not happen on that adapter) also send DISPLAY_OFF notification.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Correct the Vega20 thermal swctf limit.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Correct the Vega12 thermal swctf limit.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
When deciding whether to set pg for vcn1, instances
number is more generic than chip name.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DC BTC support for sienna_cichlid is added, it provides
the DC tolerance and aging measurements.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In `amdgpu_dm_update_backlight_caps()`, there is a local
`amdgpu_dm_backlight_caps` object that is filled in by
`amdgpu_acpi_get_backlight_caps()`. However, this object is
uninitialized before the call and hence the subsequent check for
aux_support can fail since it is not initialized by
`amdgpu_acpi_get_backlight_caps()` as well. This change initializes
this local `amdgpu_dm_backlight_caps` object to 0.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Furquan Shaikh <furquan@google.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
These aren't stable on some platform configurations when driving
multiple displays, especially on higher resolution.
In particular the delay in asserting p-state and validating from
x86 outweights any power or performance benefit from the hardware
composition.
Under some configurations this will manifest itself as extreme stutter
or unresponsiveness especially when combined with cursor movement.
[How]
Disable these for now. Exposing overlays to userspace doesn't guarantee
that they'll be able to use them in any and all configurations and it's
part of the DRM contract to have userspace gracefully handle validation
failures when they occur.
Valdiation occurs as part of DC and this in particular affects RV, so
disable this in dcn10_global_validation.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Documentation for sysfs backlight level interface requires that
values in both 'brightness' and 'actual_brightness' files are
interpreted to be in range from 0 to the value given in the
'max_brightness' file.
With amdgpu, max_brightness gives 255, and values written by the user
into 'brightness' are internally rescaled to a wider range. However,
reading from 'actual_brightness' gives the raw register value without
inverse rescaling. This causes issues for various userspace tools such
as PowerTop and systemd that expect the value to be in the correct
range.
Introduce a helper to retrieve internal backlight range. Use it to
reimplement 'convert_brightness' as 'convert_brightness_from_user' and
introduce 'convert_brightness_to_user'.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=203905
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1242
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alexander Monakov <amonakov@ispras.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
core_link_read_dpcd returns only DC_OK(1) and DC_ERROR_UNEXPECTED(-1),
the caller should check error using DC_OK instead of checking against 0
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable HW Default flip for small PL.
bspec: 52890
bspec: 53508
bspec: 53273
v2: rebase to drm-tip
v3: move from ctx to gt workarounds. Remove whitelist.
v4: move to rcs WA init
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826025724.20944-1-clinton.a.taylor@intel.com
Print an error message inside ps8640_bridge_vdo_control() function when
it fails so we can simplify a bit the callers, they will only need to
check the error code.
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Bilal Wasim <bwasim.lkml@gmail.com>
Tested-by: Bilal Wasim <bwasim.lkml@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826081526.674866-5-enric.balletbo@collabora.com
Bridge drivers that implement the new model only shall return an error
from their attach() handler when the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag
is not set. So make sure we return an error because only the new
drm_bridge model is supported.
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Bilal Wasim <bwasim.lkml@gmail.com>
Tested-by: Bilal Wasim <bwasim.lkml@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826081526.674866-4-enric.balletbo@collabora.com
The PS8640 DSI-to-eDP bridge can retrieve the EDID, so implement the
.get_edid callback and set the flag to indicate the core to use it.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826081526.674866-3-enric.balletbo@collabora.com
In an eDP application, HPD is not required and on most bridge chips
useless. If HPD is not used, we need to set initial status as connected,
otherwise the connector created by the drm_bridge_connector API remains
in an unknown state.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Bilal Wasim <bwasim.lkml@gmail.com>
Tested-by: Bilal Wasim <bwasim.lkml@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826081526.674866-2-enric.balletbo@collabora.com
HDCP code doesn't require to access power_well internal stuff,
instead it should use the intel_display_power_well_is_enabled()
to get the status of desired power_well.
No functional change.
v2:
- used with_intel_runtime_pm instead of get/put. [Jani]
v3:
- rebased.
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200805114521.867-3-anshuman.gupta@intel.com
Currently intel_hdcp_update_pipe() is also getting called for non-hdcp
connectors and get through its conditional code flow, which is completely
unnecessary for non-hdcp connectors, therefore it make sense to
have an early return. No functional change.
v2:
- rebased.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200805114521.867-2-anshuman.gupta@intel.com
kvaddr element of the exynos_gem object points to a memory buffer, thus
it should not have a __iomem annotation. Then, to avoid a warning or
casting on assignment to fbi structure, the screen_buffer element of the
union should be used instead of the screen_base.
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
After commit 92cc68e358 ("drm/vblank: Use
spin_(un)lock_irq() in drm_crtc_vblank_on()") omapdrm locking is broken:
WARNING: inconsistent lock state
5.8.0-rc2-00483-g92cc68e35863 #13 Tainted: G W
--------------------------------
inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage.
swapper/0/0 [HC1[1]:SC0[0]:HE0:SE1] takes:
ea98222c (&dev->event_lock#2){?.+.}-{2:2}, at: drm_handle_vblank+0x4c/0x520 [drm]
{HARDIRQ-ON-W} state was registered at:
trace_hardirqs_on+0x9c/0x1ec
_raw_spin_unlock_irq+0x20/0x58
omap_crtc_atomic_enable+0x54/0xa0 [omapdrm]
drm_atomic_helper_commit_modeset_enables+0x218/0x270 [drm_kms_helper]
omap_atomic_commit_tail+0x48/0xc4 [omapdrm]
commit_tail+0x9c/0x190 [drm_kms_helper]
drm_atomic_helper_commit+0x154/0x188 [drm_kms_helper]
drm_client_modeset_commit_atomic+0x228/0x268 [drm]
drm_client_modeset_commit_locked+0x60/0x1d0 [drm]
drm_client_modeset_commit+0x24/0x40 [drm]
drm_fb_helper_restore_fbdev_mode_unlocked+0x54/0xa8 [drm_kms_helper]
drm_fb_helper_set_par+0x2c/0x5c [drm_kms_helper]
drm_fb_helper_hotplug_event.part.0+0xa0/0xbc [drm_kms_helper]
drm_kms_helper_hotplug_event+0x24/0x30 [drm_kms_helper]
output_poll_execute+0x1a8/0x1c0 [drm_kms_helper]
process_one_work+0x268/0x800
worker_thread+0x30/0x4e0
kthread+0x164/0x190
ret_from_fork+0x14/0x20
The reason for this is that omapdrm calls drm_crtc_vblank_on() while
holding event_lock taken with spin_lock_irq().
It is not clear why drm_crtc_vblank_on() and drm_crtc_vblank_get() are
called while holding event_lock. I don't see any problem with moving
those calls outside the lock, which is what this patch does.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819103021.440288-1-tomi.valkeinen@ti.com
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl9C2tseHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGgXoH/AuyLuMWwukVjVAx
b2N2Ri0qFVyZWLky+uPqc4NkqJCbD/Rt2Kq8odLnJOrs2bXKpP5KrMl4sVqwSRr4
CSkHkpo4oglmIxe5ptoWmWjrvHm/KNDZd2PY8cehii5eXG+aS7g3rIYjSFlXzP+1
yndJ00H7CDOxHd/DngqfD+Sr7j76EM1iZE9316JR7TEu5o38I4Ipu6+3L3uFZVlf
M90SmymY6hM7AJAyuOrd79ffXQry9KvWMUYyRkYyDK8y9taOSzfdfpppk8q5cVB1
l4pcPNBiveRM3Yet7UAMb8FSz8OG0rPkkCsq8ALNU/UO91IDY832OUyLxXUpWlf6
ZWRP2HA=
=596f
-----END PGP SIGNATURE-----
Merge tag 'v5.9-rc2' into drm-misc-fixes
Backmerge requested by Tomi for a fix to omap inconsistent
locking state issue, and because we need at least v5.9-rc2 now.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Our variety of defined gpu commands have the actual
command id field and possibly length and flags applied.
We did start to apply the mask during initialization of
the cmd descriptors but forgot to also apply it on comparisons.
Fix comparisons in order to properly deny access with
associated commands.
v2: fix lri with correct mask (Chris)
References: 926abff21a ("drm/i915/cmdparser: Ignore Length operands during command matching")
Reported-by: Nicolai Stange <nstange@suse.de>
Cc: stable@vger.kernel.org # v5.4+
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tyler Hicks <tyhicks@canonical.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200817195926.12671-1-mika.kuoppala@linux.intel.com
(cherry picked from commit 3b4efa148d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add a static inline adev_to_drm() to obtain
the DRM device pointer from an amdgpu_device pointer.
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Get the amdgpu_device from the DRM device by use
of an inline function, drm_to_adev(). The inline
function resolves a pointer to struct drm_device
to a pointer to struct amdgpu_device.
v2: Use a typed visible static inline function
instead of an invisible macro.
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When deciding whether to set pg for vcn1, instances
number is more generic than chip name.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Change to dynamically create and release hive info object,
which help driver support more hives in the future.
v2:
Change to save hive object pointer in adev, to avoid locking
xgmi_mutex every time when calling amdgpu_get_xgmi_hive.
v3:
1. Change type of hive object pointer in adev from void* to
amdgpu_hive_info*.
2. remove unnecessary variable initialization.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Using dev_xxx instead of DRM_xxx/pr_xxx to indicate which device
of a hive is the message for.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
in single gpu system, if driver reenter gpu recovery,
amdgpu_device_lock_adev will return false, but hive is
nullptr now.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
clients don't need reset-lock for synchronization when no
GPU recovery.
v2:
change to return the return value of down_read_killable.
v3:
if GPU recovery begin, VF ignore FLR notification.
Reviewed-by: Monk Liu <monk.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DC BTC support for sienna_cichlid is added, it provides
the DC tolerance and aging measurements.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In `amdgpu_dm_update_backlight_caps()`, there is a local
`amdgpu_dm_backlight_caps` object that is filled in by
`amdgpu_acpi_get_backlight_caps()`. However, this object is
uninitialized before the call and hence the subsequent check for
aux_support can fail since it is not initialized by
`amdgpu_acpi_get_backlight_caps()` as well. This change initializes
this local `amdgpu_dm_backlight_caps` object to 0.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Furquan Shaikh <furquan@google.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In init_powerplay_table_information() the value returned from kmalloc()
is cast unnecessarily. Remove cast.
Issue identified with Coccinelle.
Signed-off-by: Alex Dewar <alex.dewar90@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove asic_reg/nbio/nbio_6_1_offset.h which is included more than once
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Besides the intended change, commit 4cc1178e16 ("drm/amdgpu: replace DRM
prefix with PCI device info for gfx/mmhub") also set the source files
mmhub_v1_0.c and gfx_v9_4.c to be executable, i.e., changed fromold mode
644 to new mode 755.
Commit 241b2ec931 ("drm/amd/display: Add dcn30 Headers (v2)") added the
four header files {dpcs,dcn}_3_0_0_{offset,sh_mask}.h as executable, i.e.,
mode 755.
Set to the usual modes for source and headers files and clean up those
mistakes. No functional change.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
if other threads have holden the reset lock, recovery will
fail to try_lock. Therefore we introduce atomic hive->in_reset
and adev->in_gpu_reset, to avoid reentering GPU recovery.
v2:
drop "? true : false" in the definition of amdgpu_in_reset
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
These aren't stable on some platform configurations when driving
multiple displays, especially on higher resolution.
In particular the delay in asserting p-state and validating from
x86 outweights any power or performance benefit from the hardware
composition.
Under some configurations this will manifest itself as extreme stutter
or unresponsiveness especially when combined with cursor movement.
[How]
Disable these for now. Exposing overlays to userspace doesn't guarantee
that they'll be able to use them in any and all configurations and it's
part of the DRM contract to have userspace gracefully handle validation
failures when they occur.
Valdiation occurs as part of DC and this in particular affects RV, so
disable this in dcn10_global_validation.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add __user annotation to fix related sparse warning while reading
SDMA counters from userland.
Also, rework the read SDMA counters function by removing redundant
checks.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The drm scheduler currently expects that the stop/start sequence is always
executed in the timeout handling, as the job at the head of the hardware
execution list is always removed from the ring mirror before the driver
function is called and only inserted back into the list when starting the
scheduler.
This adds some unnecessary overhead if the timeout handler determines
that the GPU is still executing jobs normally and just wished to extend
the timeout, but a better solution requires a major rearchitecture of the
scheduler, which is not applicable as a fix.
Fixes: 135517d356 ("drm/scheduler: Avoid accessing freed bad job.")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Russell King <rmk+kernel@armlinux.org.uk>
It looks like that this GPU core triggers an abort when
reading VIVS_HI_CHIP_PRODUCT_ID and/or VIVS_HI_CHIP_ECO_ID.
I looked at different versions of Vivante's kernel driver and did
not found anything about this issue or what feature flag can be
used. So go the simplest route and do not read these two registers
on the affected GPU core.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reported-by: Josua Mayer <josua.mayer@jm0.eu>
Fixes: 815e45bbd4 ("drm/etnaviv: determine product, customer and eco id")
Cc: stable@vger.kernel.org
Tested-by: Josua Mayer <josua.mayer@jm0.eu>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
If ge_b850v3_lvds_init() does not allocate memory for ge_b850v3_lvds_ptr,
then a null pointer dereference is accessed.
The patch adds checking of the return value of ge_b850v3_lvds_init().
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Nadezda Lutovinova <lutovinova@ispras.ru>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819143756.30626-1-lutovinova@ispras.ru
The patch reorganizing the set_freq function made it so the gmu resume
doesn't always set the frequency, because a6xx_gmu_set_freq() exits early
when the frequency hasn't been changed. Note this always happens when
resuming GMU after recovering from a hang.
Use a simple workaround to prevent this from happening.
Fixes: 1f60d11423 ("drm: msm: a6xx: send opp instead of a frequency")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Rob Clark <robdclark@chromium.org>
For production devices, the debugbus sections will typically be fused
off and empty in the gpu device coredump. But since this may contain
data like cache contents, don't capture it by default.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Backport note: maybe wait some time for the crashdec MR[1] to look for
both the old typo'd name and the corrected name to land in mesa 20.2
[1] https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6242
Fixes: 1707add815 ("drm/msm/a6xx: Add a6xx gpu state")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
New Qualcomm firmware has changed a way it reports back the 'started'
event. Support new register values.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
This has roughly the same effect as drm_atomic_helper_wait_for_vblanks(),
basically just ensuring that vblank accounting is enabled so that we get
valid timestamp/seqn on pageflip events.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
This patch implements WA for AM65xx erratum i2000, which causes YUV
formats to show wrong colors.
An earlier patch removed a partial WA:
a8d9d7da15 ("drm/tidss: remove AM65x PG1 YUV erratum code")
The patch explains the reasoning for removal. The change in plans has
been that it has become clear that there are and will be users for PG1
SoCs and as such it's good to implement the WA for PG1s.
This patch adds the WA back so that it is only used on SR1.0 (which is
the new name for PG1). The previous WA code didn't check the SoC
revision, which this patch does.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200812112625.59897-1-tomi.valkeinen@ti.com
Reviewed-by: Jyri Sarha <jsarha@ti.com>
The OMAP DRM driver includes <linux/gpio.h> into the two
hdmi4.c and hdmi5.c files but does not use any symbols from
these files. Drop the includes.
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200626220606.340937-1-linus.walleij@linaro.org
Our variety of defined gpu commands have the actual
command id field and possibly length and flags applied.
We did start to apply the mask during initialization of
the cmd descriptors but forgot to also apply it on comparisons.
Fix comparisons in order to properly deny access with
associated commands.
v2: fix lri with correct mask (Chris)
References: 926abff21a ("drm/i915/cmdparser: Ignore Length operands during command matching")
Reported-by: Nicolai Stange <nstange@suse.de>
Cc: stable@vger.kernel.org # v5.4+
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tyler Hicks <tyhicks@canonical.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200817195926.12671-1-mika.kuoppala@linux.intel.com
There is already a 'struct device' pointer in the drm_panel structure,
that we can access easily from our priv structure, so there's no need
for a separate 'dev' field there.
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200820121256.32037-3-paul@crapouillou.net
The drm_panel_of_backlight() function must be called after
drm_panel_init(), according to the function's documentation; otherwise
the backlight won't be properly initialized.
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200820121256.32037-2-paul@crapouillou.net
drm-next reverted the changes to ttm_tt_create() to do the
NULL check inside the function, but drm-misc-next adds new
users of this approach.
Re-apply the NULL check change inside the function to fix this.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/386628/
This reverts commit 9c9b17a7d1.
Newly released sdma fw (51.52) provides a fix for the issue.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add minimum width to planes, variable with specific formats for gen11+
to reflect recent bspec changes.
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200812210702.7153-1-matthew.s.atwood@intel.com
Reviewing this block of code in cdv_intel_dp_init()
ret = cdv_intel_dp_aux_native_read(gma_encoder, DP_DPCD_REV, ...
cdv_intel_edp_panel_vdd_off(gma_encoder);
if (ret == 0) {
/* if this fails, presume the device is a ghost */
DRM_INFO("failed to retrieve link info, disabling eDP\n");
drm_encoder_cleanup(encoder);
cdv_intel_dp_destroy(connector);
goto err_priv;
} else {
The (ret == 0) is not strict enough.
cdv_intel_dp_aux_native_read() returns > 0 on success
otherwise it is failure.
So change to <=
Fixes: d112a8163f ("gma500/cdv: Add eDP support")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200805205911.20927-1-trix@redhat.com
Finalize he conversion of GMA500 to use only GPIO descriptors.
The GPIO look-up-table is associated with the device directly
in the GMA500 Medfield chip driver since no explicit platform
type device (such as in x86/platform/intel-mid) exists: the
GMA500 probes directly from the PCI device. Apparently GPIOs
128 and 34 are used on all of these so just go ahead and
register those for resetting the DSI pipes.
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200703125901.513476-1-linus.walleij@linaro.org
The dependency between power wells is determined by the ordering of the
power well list: when enabling the power wells for a domain, this
happens walking the power well list forward, while disabling them
happens in the reverse direction. Accordingly a power well on the list
must follow any other power well it depends on.
Since the TC AUX power wells depend on TC-cold being blocked, move the
TC-cold off power well before all AUX power wells.
Fixes: 3c02934b24 ("drm/i915/tc/tgl: Implement TC cold sequences")
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200720232952.16228-1-imre.deak@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit b302a2e688)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
igt_mm_config() calls ilog2() on the (pseudo)random 21-bit number
s>>12. Once in 2 million seeds, this is zero and ilog2 summons
the nasal demons.
There was an attempt to handle this case with a max(), but that's
too late; ms could already be something bizarre.
Given that the low 12 bits of s and ms are always zero, it's a lot
simpler just to divide them by 4096, then everything fits into 32
bits, and we can easily generate a random number 1 <= s <= 0x1fffff.
Fixes: 14d1b9a624 ("drm/i915: buddy allocator")
Signed-off-by: George Spelvin <lkml@sdf.org>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200325192429.GA8865@SDF.ORG
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 21118e8e56)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
In the case of calling check_digital_port_conflicts() failed, a
negative error code -EINVAL should be returned.
Fixes: bf5da83e4b ("drm/i915: Move check_digital_port_conflicts() earier")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200802111535.5200-1-tianjia.zhang@linux.alibaba.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 66b51b801d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
A recent bspec update removed the LPDDR4 single channel entry from the
buddy register table, but added a new four-channel entry.
Workaround 1409767108 hasn't been updated with any guidance for four
channel configurations, so we leave that alternate table unchanged for
now.
Bspec 49218
Fixes: 3fa01d642f ("drm/i915/tgl: Program BW_BUDDY registers during display init")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200612204734.3674650-1-matthew.d.roper@intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit ecb40d0826)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Since we use the module parameters stored inside the drm_i915_device
itself, we need to ensure the mock i915_device also sets up the right
defaults.
Fixes: 8a25c4be58 ("drm/i915/params: switch to device specific parameters")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200728150600.4509-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 98ef067453)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Rather than manually implement our own module reference counting for perf
pmu events, finally realise that there is a module parameter to struct
pmu for this very purpose.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716094643.31410-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 27e897beec)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
sparse complains about having 2 "__iomem" attributes on the same line
where only one is needed since the first one applies to everything
up to the ending ';'.
However, to make it clear(er) that both of these pointers are
"__iomem", use separate lines for them.
../drivers/gpu/drm/ast/ast_cursor.c:256:26: CK: warning: duplicate [noderef]
../drivers/gpu/drm/ast/ast_cursor.c:256:26: CK: error: multiple address space given: __iomem & __iomem
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Dave Airlie <airlied@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/a8185578-a69a-16b0-6fdf-f4e46bc4f61f@infradead.org
Documentation for sysfs backlight level interface requires that
values in both 'brightness' and 'actual_brightness' files are
interpreted to be in range from 0 to the value given in the
'max_brightness' file.
With amdgpu, max_brightness gives 255, and values written by the user
into 'brightness' are internally rescaled to a wider range. However,
reading from 'actual_brightness' gives the raw register value without
inverse rescaling. This causes issues for various userspace tools such
as PowerTop and systemd that expect the value to be in the correct
range.
Introduce a helper to retrieve internal backlight range. Use it to
reimplement 'convert_brightness' as 'convert_brightness_from_user' and
introduce 'convert_brightness_to_user'.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=203905
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1242
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alexander Monakov <amonakov@ispras.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
core_link_read_dpcd returns only DC_OK(1) and DC_ERROR_UNEXPECTED(-1),
the caller should check error using DC_OK instead of checking against 0
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The 32 bit unsigned integer bl_pwm is being shifted using 32 bit arithmetic
and then being assigned to a 64 bit unsigned integer. There is a potential
for a 32 bit overflow so cast bl_pwm to enforce a 64 bit shift operation
to avoid this.
Addresses-Coverity: ("unintentional integer overflow")
Fixes: 3ba0181736 ("drm/amd/display: Move panel_cntl specific register from abm to panel_cntl.")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We can get this on RENOIR and newer via the SMU metrics
table.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Grab the data from the SMU metrics table.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Grab the data from the SMU metrics table.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
FAMILY_KV is APUs and we already check for APUs.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix warning from kernel test robot
v2: remove the local variable as well
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use function printk_ratelimit to limit the print rate.
Signed-off-by: jqdeng <Emily.Deng@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only for no job running test case need to do recover in
flr notification.
For having job in mirror list, then let guest driver to
hit job timeout, and then do recover.
Signed-off-by: jqdeng <Emily.Deng@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Considering the same logic can be applied to Arcturus, Navi1X
and Sienna Cichlid.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add deep sleep disablement/enablement on UMD pstate entering/exiting.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Considering the same logic can be applied to Arcturus, Navi1X
and Sienna Cichlid.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add gfx ulv disablement/enablement on UMD pstate entering/exiting.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's in accordance with pmfw 65.7.0 for navy_flounder.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit ba4e049e63.
Newly released sdma fw (51.52) provides a fix for the issue.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove DRM_SCHED_PRIORITY_INVALID. We no longer
carry around an invalid priority and cut it off
at the source.
Backwards compatibility behaviour of AMDGPU CTX
IOCTL passing in garbage for context priority
from user space and then mapping that to
DRM_SCHED_PRIORITY_NORMAL is preserved.
v2: Revert "res" --> "r" and
"prio" --> "priority".
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove DRM_SCHED_PRIORITY_LOW, as it was used
in only one place.
Rename and separate by a line
DRM_SCHED_PRIORITY_MAX to DRM_SCHED_PRIORITY_COUNT
as it represents a (total) count of said
priorities and it is used as such in loops
throughout the code. (0-based indexing is the
the count number.)
Remove redundant word HIGH in priority names,
and rename *KERNEL* to *HIGH*, as it really
means that, high.
v2: Add back KERNEL and remove SW and HW,
in lieu of a single HIGH between NORMAL and KERNEL.
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Without this, enabling dsc will cause a nullptr
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Programming is missing the sequence where for eDP the scrambling is
reset when testing for eye diagram test pattern.
[How]
Include the required register in the definition
Signed-off-by: Chris Park <Chris.Park@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Place the cursor in the center of screen between two pipes then
adjusting the viewport but cursour doesn't update cause DFPstate hang.
[How]
If viewport changed, update cursor as well.
Cc: stable@vger.kernel.org
Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Reading for DP alt registers return incorrect values due to LE_SF
definition missing.
[How]
Define correct LE_SF or DP alt registers.
Signed-off-by: Chris Park <Chris.Park@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If DMUB is used, LVTMA VBIOS call can be used to control eDP instead of
tranditional transmitter control. Interface is agreed with VBIOS for
eDP to use this new path to program LVTMA registers.
[How]
Create DAL interface to send DMUB command for LVTMA as currently
implemented in VBIOS.
Signed-off-by: Chris Park <Chris.Park@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Renoir only has one sdma instance, it will get failed once query the
sdma1 registers. So use switch-case instead of static register array.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the same case as sienna_cichlid
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when function arcturus_get_smu_metrics_data() call failed,
it will cause the variable "throttler_status" isn't initialized before use.
warning:
powerplay/arcturus_ppt.c:2268:24: warning: ‘throttler_status’ may be used uninitialized in this function [-Wmaybe-uninitialized]
2268 | if (throttler_status & logging_label[throttler_idx].feature_mask) {
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
gfxoff is temporarily disabled for navy_flounder,
since at present the feature has broken some basic
amdgpu test.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Standardize on the dev_ based logging and drop the include of drm_print.h.
Fix a few cases where "x@" was used when printing the mode.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Cc: Jerry Han <hanxu5@huaqin.corp-partner.google.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Icenowy Zheng <icenowy@aosc.io>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200815125406.1153224-6-sam@ravnborg.org
Standardize on the dev_ based logging and drop the include of drm_print.h.
Fix a few cases where "x@" was used when printing the mode.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200815125406.1153224-5-sam@ravnborg.org
Standardize on the dev_ based logging and drop the include of drm_print.h.
Fix a few cases where "x@" was used when printing the mode.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Cc: Robert Chiras <robert.chiras@nxp.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200815125406.1153224-4-sam@ravnborg.org
Standardize on the dev_ based logging and drop the include of drm_print.h.
Fix a few cases where "x@" was used when printing the mode.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200815125406.1153224-3-sam@ravnborg.org
Standardize on the dev_ based logging and drop the include of drm_print.h.
Fix a few cases where "x@" was used when printing the mode.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200815125406.1153224-2-sam@ravnborg.org
Define shutdown callback for display drm driver,
so as to disable all the CRTCS when shutdown
notification is received by the driver.
This change will turn off the timing engine so
that no display transactions are requested
while mmu translations are getting disabled
during reboot sequence.
Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org>
Changes in v2:
- Remove NULL check from msm_pdev_shutdown (Stephen Boyd)
- Change commit text to reflect when this issue
was uncovered (Sai Prakash Ranjan)
Signed-off-by: Rob Clark <robdclark@chromium.org>
The malidp driver uses GEM object functions for callbacks. Fix it to
use them internally as well.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Fixes: ecdd647464 ("drm/malidp: Use GEM CMA object functions")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200807111022.12117-1-tzimmermann@suse.de
Add support for UUID-based resource sharing mechanism to virtgpu. This
implements the new virtgpu commands and hooks them up to dma-buf's
get_uuid callback.
Signed-off-by: David Stevens <stevensd@chromium.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200818071343.3461203-4-stevensd@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
From the 3 WAs for PSR2 man track/selective fetch this is only one
needed when doing single full frames at every flip.
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200810174144.76761-2-jose.souza@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
All GEN12 platforms supports PSR2 selective fetch but not all GEN12
platforms supports PSR2 hardware tracking(aka RKL).
This feature consists in software programming registers with the
damaged area of each plane this way hardware will only fetch from
memory those areas and sent the PSR2 selective update blocks to panel,
saving even more power.
But as initial step it is only enabling the full frame fetch at
every flip, the actual selective fetch part will come in a future
patch.
Also this is only handling the page flip side, it is still completely
missing frontbuffer modifications, that is why the
enable_psr2_sel_fetch parameter was added.
v3:
- calling intel_psr2_sel_fetch_update() during the atomic check phase
(Ville)
BSpec: 55229
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200810174144.76761-1-jose.souza@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We usually assume that increasing PCI device revision ID's translates to
newer steppings; macros like IS_KBL_REVID() that we use rely on this
behavior. Unfortunately this turns out to not be true on KBL; the
newer device 2 revision ID's sometimes go backward to older steppings.
The situation is further complicated by different GT and display
steppings associated with each revision ID.
Let's work around this by providing a table to map the revision ID to
specific GT and display steppings, and then perform our comparisons on
the mapped values.
v2:
- Move the kbl_revids[] array to intel_workarounds.c to avoid compiler
warnings about an unused variable in files that don't call the
macros (kernel test robot).
Bspec: 18329
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200811032105.2819370-1-matthew.d.roper@intel.com
Reviewed-by: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This new HBR2 table for TGL-U and TGL-Y is required to pass
DisplayPort compliance.
BSpec: 49291
Cc: Khaled Almahallawy <khaled.almahallawy@intel.com>
Reviewed-by: Khaled Almahallawy<khaled.almahallawy@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200807192629.64134-2-jose.souza@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
There is no way to differentiate TGL-U from TGL-Y by the PCI ids as
some ids are available in both SKUs.
So here using the root device id in the PCI bus that iGPU is in
to differentiate between U and Y.
BSpec: 44455
Reviewed-by: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200807192629.64134-1-jose.souza@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The command register is the PCODE MBOX low register not the high one as
described by the spec. This left the system with the TC-cold power state
being blocked all the time. Fix things by using the correct register.
Also to make sure we retry a request for at least 600usec, when the
PCODE MBOX command itself succeeded, but the TC-cold block command
failed, sleep for 1msec unconditionally after any fail.
The change was tested with JTAG register read of the HW/FW's actual
TC-cold state, which reported the expected states after this change.
Tested-by: Nivedita Swaminathan <nivedita.swaminathan@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200805150056.24248-1-imre.deak@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The dependency between power wells is determined by the ordering of the
power well list: when enabling the power wells for a domain, this
happens walking the power well list forward, while disabling them
happens in the reverse direction. Accordingly a power well on the list
must follow any other power well it depends on.
Since the TC AUX power wells depend on TC-cold being blocked, move the
TC-cold off power well before all AUX power wells.
Fixes: 3c02934b24 ("drm/i915/tc/tgl: Implement TC cold sequences")
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200720232952.16228-1-imre.deak@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
igt_mm_config() calls ilog2() on the (pseudo)random 21-bit number
s>>12. Once in 2 million seeds, this is zero and ilog2 summons
the nasal demons.
There was an attempt to handle this case with a max(), but that's
too late; ms could already be something bizarre.
Given that the low 12 bits of s and ms are always zero, it's a lot
simpler just to divide them by 4096, then everything fits into 32
bits, and we can easily generate a random number 1 <= s <= 0x1fffff.
Fixes: 14d1b9a624 ("drm/i915: buddy allocator")
Signed-off-by: George Spelvin <lkml@sdf.org>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200325192429.GA8865@SDF.ORG
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Introduces a new parameters to execbuf so that we can specify syncobj
handles as well as timeline points.
v2: Reuse i915_user_extension_fn
v3: Check that the chained extension is only present once (Chris)
v4: Check that dma_fence_chain_find_seqno returns a non NULL fence (Lionel)
v5: Use BIT_ULL (Chris)
v6: Fix issue with already signaled timeline points,
dma_fence_chain_find_seqno() setting fence to NULL (Chris)
v7: Report ENOENT with invalid syncobj handle (Lionel)
v8: Check for out of order timeline point insertion (Chris)
v9: After explanations on
https://lists.freedesktop.org/archives/dri-devel/2019-August/229287.html
drop the ordering check from v8 (Lionel)
v10: Set first extension enum item to 1 (Jason)
v11: Rebase
v12: Allow multiple extension nodes of timeline syncobj (Chris)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Co-authored-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v11)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804085954.350343-3-lionel.g.landwerlin@intel.com
Link: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2901
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We're planning to use this for a couple of new feature where we need
to provide additional parameters to execbuf.
v2: Check for invalid flags in execbuffer2 (Lionel)
v3: Rename I915_EXEC_EXT -> I915_EXEC_USE_EXTENSIONS (Chris)
v4: Rebase
Move array fence parsing in i915_gem_do_execbuffer()
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804085954.350343-2-lionel.g.landwerlin@intel.com
Link: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2901
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The hardware team has dropped this workaround from the bspec; it is no
longer needed.
This reverts commit 111822b21be995a3a4a731066db3d820523c57f7.
Bspec: 49291
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804044024.1931170-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
In the case of calling check_digital_port_conflicts() failed, a
negative error code -EINVAL should be returned.
Fixes: bf5da83e4b ("drm/i915: Move check_digital_port_conflicts() earier")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200802111535.5200-1-tianjia.zhang@linux.alibaba.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
In function i915_active_acquire_preallocate_barrier(), not all
paths have the return value set correctly, and in case of memory
allocation failure, a negative error code should be returned.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200802115655.25568-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
A recent bspec update removed the LPDDR4 single channel entry from the
buddy register table, but added a new four-channel entry.
Workaround 1409767108 hasn't been updated with any guidance for four
channel configurations, so we leave that alternate table unchanged for
now.
Bspec 49218
Fixes: 3fa01d642f ("drm/i915/tgl: Program BW_BUDDY registers during display init")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200612204734.3674650-1-matthew.d.roper@intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We use i915_active_fini() as a debug check on the i915_active state
before freeing. If we forget to call it, we may end up angering the
debugobjects contained within.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200731085015.32368-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
It's been a while since gen6_rps_boost() [that only worked on gen6+] was
replaced by intel_rps_boost() that understood itself when rps was
active. Since the intel_rps_boost() is gen-agnostic, just call it.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200728152219.1387-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Since we want to read the values from the HWSP as written to by the GPU,
warn the compiler that the values are volatile.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200728152110.830-2-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Since we use the module parameters stored inside the drm_i915_device
itself, we need to ensure the mock i915_device also sets up the right
defaults.
Fixes: 8a25c4be58 ("drm/i915/params: switch to device specific parameters")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200728150600.4509-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Fbc is causing random underruns in CI execution on TGL platforms.
Disabling the same while the problem is being debugged and analyzed.
v2: Moved the check below the module param check (Ville)
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716145857.6911-1-uma.shankar@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Although the WA description targets the platforms it is a workaround
for the affected PCHs, that is why it is being checked.
v2: excluding DG1 fake PCH from WA
BSpec: 52890
BSpec: 53273
BSpec: 52888
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727164729.28836-1-jose.souza@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
After doing normal PHY-B initialization on Rocket Lake, we need to
manually copy some additional PHY-A register values into PHY-B
registers.
Note that the bspec's combo phy page doesn't specify that this
workaround is restricted to specific platform steppings (and doesn't
even do a very good job of specifying that RKL is the only platform this
is needed on), but the RKL workaround page lists this as relevant only
for A and B steppings, so I'm trusting that information for now.
v2: Make rkl_combo_phy_b_init_wa() static
v3:
- Minimize variables in WA function. (Jose)
- Fix timeout duration (usec vs msec). (Jose)
- Add verification of workaround. (Jose)
- Fix stepping bounds in comment.
Bspec: 49291
Bspec: 53273
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716220551.2730644-6-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
If HTI (also sometimes called HDPORT) is enabled at startup, it may be
using some of the PHYs and DPLLs making them unavailable for general
usage. Let's read out the HDPORT_STATE register and avoid making use of
resources that HTI is already using.
v2:
- Fix minor checkpatch warnings
v3:
- Just readout HDPORT_STATE register once during init and then parse it
later as needed.
- Add a 'has_hti' device info flag to track whether we should readout
HDPORT_STATE or not. We can skip the platform/flag tests later since
the hti_state in dev_priv will remain 0 for platforms it does not
apply to.
- Move PLL masking into icl_get_combo_phy_dpll() since at the moment
RKL is the only platform that has HTI. (Jose)
Bspec: 49189
Bspec: 53707
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716220551.2730644-5-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Rocket Lake has a third DPLL (called 'DPLL4') that must be used to
enable a third display. Unlike EHL's variant of DPLL4, the RKL variant
behaves the same as DPLL0/1. And despite its name, the DPLL4 registers
are offset as if it were DPLL2.
v2:
- Add new .update_ref_clks() hook.
v3:
- Renumber TBT PLL to '3' and switch _MMIO_PLL3 to _MMIO_PLL (Lucas)
v4:
- Don't drop _MMIO_PLL3; although it's now unused, we're going to need
it very soon again for upcoming DG1 patches. (Lucas)
v5:
- Don't re-number TBT PLL and beyond, just use new RKL_DPLL_CFGCR
macros to lookup the proper registers instead. Although renumbering
the PLLs might be something we want to consider down the road, it
opens a big can of worms right now since a bunch of places in the
code have an assumption that the PLL table has idx==id and no holes.
Renumbering creates a hole for TGL, so we'd either need to allow
holes in the table or break the idx==id invariant, both of which are
somewhat invasive changes to the design.
Bspec: 49202
Bspec: 49443
Bspec: 50288
Bspec: 50289
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716220551.2730644-4-matthew.d.roper@intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
RKL and TGL share some general gen12 workarounds, but each platform also
has its own platform-specific workarounds.
v2:
- Add Wa_1604555607 for RKL. This makes RKL's ctx WA list identical to
TGL's, so we'll have both functions call the tgl_ function for now;
this workaround isn't listed for DG1 so we don't want to add it to
the general gen12_ function.
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716220551.2730644-3-matthew.d.roper@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
It's silly to have if(SKL) checks in gen9_init_clock_gating() when
we can just move those bits into skl_init_clock_gating().
I'm not entirely convinced we even need this w/a, or if we do
then maybe we want it for kbl/cfl as well. IIRC it was only
listed in the wadb, but that is now dead so can't double check
anymore. Bspec doesn't seem to have any purely skl specific
DOP clock gating workarounds listed.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716190426.17047-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Hours Of Battery Life is a new GEN12+ power-saving feature that allows
supported motherboards to use a special voltage swing table for eDP
panels that uses less power.
So here if supported by HW, OEM will set it in VBT and i915 will try
to train link with HOBL vswing table if link training fails it fall
back to the original table.
intel_ddi_dp_preemph_max() was optimized to only check the HOBL flag
instead of do something like is done in intel_ddi_dp_voltage_max()
because it is only called after the first entry of the voltage swing
table was loaded so the HOBL flag is valid at that point.
v3:
- removed a few parameters of icl_ddi_combo_vswing_program() that
can be taken from encoder
v4:
- using the HOBL vswing table until training fails completely (Ville)
v5:
- not reducing lane or link rate when link training fails with HOBL
active
- duplicated the HOBL voltage swing entry to match DP spec requirement
v6:
- removed the optional VS 3 & pre-emp 0 from HOBL table
- changed from u8:1 to bool to store hobl_failed/active
BSpec: 49291
BSpec: 49399
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200715175637.33763-1-jose.souza@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Rather than manually implement our own module reference counting for perf
pmu events, finally realise that there is a module parameter to struct
pmu for this very purpose.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716094643.31410-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The value we program to DDI_BUF_CTL changes at the following places:
- At enabling/disabling the output to configure the port width etc, and
to enable/disable the DDI BUF function.
- At the beginning/end of link re-training to disable/re-enable the DDI
BUF function.
- On HSW/BDW/SKL to change the voltage swing/pre-emph levels.
Except of the above the value we program to the DDI_BUF_CTL register
(intel_dp->DP) doesn't change, so no need to reprogram the register when
changing the link training patterns (which is programmed via the
DP_TP_CTL register on DDI platforms).
v2:
- Fix the commit message wrt. voltage/pre-emph level values in
intel_dp->DP. (Ville)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200714153141.10280-2-imre.deak@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
According to BSpec this flag should not be changed while the DDI
function is enabled. On BDW+ the DP_TP_CTL register spec also states it
explicitly that the HW takes care of enabling/disabling the scrambling
for training patterns (and it must stay enabled for normal pixel
output). Assume that this HW automatic handling of scrambling is also
true for HSW.
BSpec: 8013, 7557, 50484
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200714153141.10280-1-imre.deak@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Explicitly check for i830 when assigning the .get_cdclk() vfunc,
and then deal with the case of not having assigned the vfunc
separately. Less confusing, and gets rid of the checkpatch complaint
about using {} on one branch but not the others.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200714152626.380-3-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
There's a pointless hole in struct intel_cdclk_vals, get rid of it.
Fortunately we already use named initializers so the order does not
matter.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200714152626.380-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Since g4x the CFB base only takes a 28bit offset into stolen.
Not sure if the CFB is allowed to start below that limit but
then extend beyond it. Let's assume not and just restrict the
allocation to the first 256MiB (in the unlikely case
we have more stolen than that).
v2: s/BIT/BIT_ULL/ (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200714201945.18959-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This patches replaces the previously used static DDR vote and uses
dev_pm_opp_set_bw() to scale GPU->DDR bandwidth along with scaling
GPU frequency. Also since the icc path voting is handled completely
in the opp driver, remove the icc_path handle and its usage in the
drm driver.
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The GPU has no business writing into the ringbuffer, let's make it
readonly to the GPU.
Fixes: 7198e6b031 ("drm/msm: add a3xx gpu support")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
We need to set it to the most recent completed fence, not the most
recent submitted. Otherwise we have races where we think we can retire
submits that the GPU is not finished with, if the GPU doesn't manage to
overwrite the seqno before we look at it.
This can show up with hang recovery if one of the submits after the
crashing submit also hangs after it is replayed.
Fixes: f97decac5f ("drm/msm: Support multiple ringbuffers")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c:817 dpu_crtc_enable() error: uninitialized symbol 'request_bandwidth'.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Plane validation uses an API drm_calc_scale which will
return src/dst value as a scale ratio.
when viewing the range on a scale the values should fall in as
Upscale ratio < Unity scale < Downscale ratio for src/dst formula
Fix the min and max scale ratios to suit the API accordingly.
Signed-off-by: Kalyan Thota <kalyan_t@codeaurora.org>
Tested-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
In TEST_ONLY commit, rm global_state will duplicate the
object and request for new reservations, once they pass
then the new state will be swapped with the old and will
be available for the Atomic Commit.
This patch fixes some of missing links in the resource
reservation sequence mentioned above.
1) Creation of duplicate state in test_only commit (Rob)
2) Allocate and release the resources on every modeset.
3) Avoid allocation only when active is false.
In a modeset operation, swap state happens well before
disable. Hence clearing reservations in disable will
cause failures in modeset enable.
Allow reservations to be cleared/allocated before swap,
such that only newly committed resources are pushed to HW.
Changes in v1:
- Move the rm release to atomic_check.
- Ensure resource allocation and free happens when active
is not changed i.e only when mode is changed.(Rob)
Changes in v2:
- Handle dpu_kms_get_global_state API failure as it may
return EDEADLK (swboyd).
Signed-off-by: Kalyan Thota <kalyan_t@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
This field is not defined for DCN3
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Header Changes]
- Add command for panel power seq control
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DSC will be disabled if DPCD 0006F[6:3] is set to a non-zero value
because bits 6:3 are not currently supported. When 6:3 is populated, an
unsupported INCREMENT OF bits_per_pixel value is read (DPCD 0006F[2:0])
[How]
Mask the INCREMENT OF bits_per_pixel field so that values in the
unsupported field are ignored.
Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Programming is missing the sequence where for eDP the scrambling is
reset when testing for eye diagram test pattern.
[How]
Include the required register in the definition
Signed-off-by: Chris Park <Chris.Park@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For some special panel, it will have an invalid HPD high cause driver
DPCD read/write fail.
[How]
Add extra T3 delay as a monitor patch in dce110_edp_wait_for_hpd_ready
Signed-off-by: Lewis Huang <Lewis.Huang@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Previously when force enabling DSC on SST display we unknowingly
supressed lane count, which caused DSC to be enabled automatically.
[how]
By adding an additional flag to force enable DSC in dc_dsc.c DSC can
always be enabled with debugfs dsc_clock_en forced to 1
Cc: stable@vger.kernel.org
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Current pipe merge and split logic only supports cases where new
dc_state is allocated and relies on dc->current_state to gather
information from previous dc_state.
Calls to validate_bandwidth on UPDATE_TYPE_MED would cause an issue
because there is no new dc_state allocated, and data in
dc->current_state would be overwritten during pipe merge.
[how]
Only allow validate_bandwidth when new dc_state space is created.
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
with eDP + DP, each display use one pipe. after DP unplugged, eDP switch
from one pipe to two pipes -- pipe split. dpp1_cm_set_regamma_pwl will
be executed too. The duration from switch single pipe to dual pipes is a
little long which could let eDP enter PSR mode. upon two pipes for eDP
are setup, eDP PHY is disabled. front pipe is not really running to
fetch data from frame buffer. i.e., dchubp is not in normal working
status. execution of hubbub1_wm_change_req_wa may cause p-state warning.
[How]
disable eDP PSR before dc_commit_state. psr is disabled when execute
hubbub1_wm_change_req_wa.
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Place the cursor in the center of screen between two pipes then
adjusting the viewport but cursour doesn't update cause DFPstate hang.
[How]
If viewport changed, update cursor as well.
Cc: stable@vger.kernel.org
Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
change abm config init interface to support multiple ABMs.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
create a dedicated function to make mst link settings decision, so that
the policy's decision is made in a unified place.
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Reading for DP alt registers return incorrect values due to LE_SF
definition missing.
[How]
Define correct LE_SF or DP alt registers.
Signed-off-by: Chris Park <Chris.Park@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If DMUB is used, LVTMA VBIOS call can be used to control eDP instead of
tranditional transmitter control. Interface is agreed with VBIOS for
eDP to use this new path to program LVTMA registers.
[How]
Create DAL interface to send DMUB command for LVTMA as currently
implemented in VBIOS.
Signed-off-by: Chris Park <Chris.Park@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1:
add trace event enabled check to avoid nop loop when submit multi ibs
in amdgpu_cs_ioctl() function.
v2:
add a new wrapper function to trace all amdgpu cs ibs.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix amdgpu_bo_release_notify() comment error.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Renoir only has one sdma instance, it will get failed once query the
sdma1 registers. So use switch-case instead of static register array.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fell off in the conversion in
commit 9bcaa3fe58
Author: Michal Orzel <michalorzel.eng@gmail.com>
Date: Tue Apr 28 19:10:04 2020 +0200
drm: Replace drm_modeset_lock/unlock_all with DRM_MODESET_LOCK_ALL_* helpers
but it's caught by the drm_warn_on_modeset_not_all_locked() that the
legacy modeset code uses. Since this is the bkl and it's unclear
what's all protected, play it safe and grab it again for legacy
drivers.
Unfortunately this means we need to sprinkle a few more #includes
around.
Also we need to add the drm_device as a parameter to the _END macro.
Finally remove the mute_lock() from setcrtc, since that's now done by
the macro.
Cc: Alex Deucher <alexdeucher@gmail.com>
References: https://gitlab.freedesktop.org/drm/amd/-/issues/1224
Fixes: 9bcaa3fe58 ("drm: Replace drm_modeset_lock/unlock_all with DRM_MODESET_LOCK_ALL_* helpers")
Cc: Michal Orzel <michalorzel.eng@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.8+
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200814093842.3048472-1-daniel.vetter@ffwll.ch
[Why]
In certain cases the crtc can be NULL and returning -EINVAL causes
atomic check to fail when it shouln't. This leads to valid
configurations failing because atomic check fails.
[How]
Don't early return if crtc is null
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
[added stable cc]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 8ec046716c ("drm/dp_mst: Add helper to trigger modeset on affected DSC MST CRTCs")
Cc: <stable@vger.kernel.org> # v5.6+
Link: https://patchwork.freedesktop.org/patch/msgid/20200814170140.24917-1-Bhawanpreet.Lakha@amd.com
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.
This code was detected with the help of Coccinelle and, audited and
fixed manually.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20200617215707.GA16785@embeddedor
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
qemu 5.0 introduces a new qxl hardware revision 5. Unlike revision 4
(and below) the device doesn't switch back into vga compatibility mode
when someone touches the vga ports. So we don't have to reserve the
vga ports any more to avoid that happening.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20200807105501.24599-1-kraxel@redhat.com
The panel orientation needs to parsed from a device-tree and assigned to
the panel's connector in order to make orientation property available to
userspace. That's what this patch does for the panel-simple driver.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200813215609.28643-5-digetx@gmail.com
The panel orientation needs to parsed from a device-tree and assigned to
the panel's connector in order to make orientation property available to
userspace. That's what this patch does for the generic LVDS panel.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200813215609.28643-4-digetx@gmail.com
This reads the DT setting for the panel rotation to set the panel
orientation in the get_modes callback.
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200813215609.28643-3-digetx@gmail.com
This adds a helper function for reading the rotation (panel
orientation) from the device tree.
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200813215609.28643-2-digetx@gmail.com
Feixin K101-IM2BYL02 is a new panel by Feixin designed as a replacement
to their K101-IM2BA02 panel. This panel utilizes the Ilitek ILI9881C
controller.
Add this panel's initialzation sequence and timing to ILI9881C driver.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200719171007.276383-2-icenowy@aosc.io
There're more panels with ILI9881C controller than the Bananapi one
supported by this driver.
Extract the mode and init sequence part, to prepare the driver for
adding new panels.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200719170411.275812-2-icenowy@aosc.io
Convert the Sharp LS020B1DD01D panel entry from using a struct
display_timing to using a struct drm_display_mode, as display_timing
seems to be the old and legacy format.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200811002240.55194-4-paul@crapouillou.net
If you pass a string that is not terminated with a carriage return to
dev_err(), it will eventually be printed with a carriage return, but
not right away, since the kernel will wait for a pr_cont().
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200811002240.55194-3-paul@crapouillou.net
Instead of manipulating the backlight directly in this driver, register
it in the probe using drm_panel_of_backlight() and let the drm_panel
framework code handle it.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200811002240.55194-2-paul@crapouillou.net
The vendor driver makes a few retries on read DSI
transactions, something that is needed especially in
case of read (such as reading the panel MTP ID) while
the panel is running in video mode. This happens on
the Samsung s6e63m0 panel on the Golden device.
Retry reads and writes alike three times.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Cc: Stephan Gerhold <stephan@gerhold.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200814194451.3494294-1-linus.walleij@linaro.org
The majority of this batch is conversion of the PWM period and duty
cycle to 64-bit unsigned integers, which is required so that some types
of hardware can generate the full range of signals that they're capable
of. The remainder is mostly minor fixes and cleanups.
-----BEGIN PGP SIGNATURE-----
iQJNBAABCAA3FiEEiOrDCAFJzPfAjcif3SOs138+s6EFAl82iq0ZHHRoaWVycnku
cmVkaW5nQGdtYWlsLmNvbQAKCRDdI6zXfz6zoTXSD/9h6v8w/9oC9xDxEO+6vTF3
XNMWBO3PxzjNpI02bxYVMckb8J6AsDFwB+fsMnRvHooFXqi+/5iQvxyt6b8rTIRA
ThOEd+PJnX9l8P9I/k/5RbdiYA51GtJomDc1f85yCs6UaMnTMRj9+S3E7rWPW+LZ
azKegtqQloJxMM8w+MBS3+3w1c4h80tfHphU4DbNDCTS0Pq2rXK2B0BJq+oFWXS+
GpTut7jzbQBpVm5+pF/3YwjQ1ODoHL+LJYtjdYdFk0HJtddsGIzR8xFAci//maZj
NtbE6tFFSz97z18QCvHBNDySV3/qVIy+Pr2g141yv0uhjvJ3zms4uveD3wmxFSbZ
0LWaGdCRUbffI1g5uCWjSEspWo+oEY3A6LQ2RVpmNL44T/rvgZuYKbJmFSnM3qr5
DzB0gx5ZlagXGO9W1u4aif+VBfJdF7JUGWazbyZ1O36bSPF83T7db8Shok10Yx+J
DsmWaxDMxVE8DFNUOaoDHXUq8L8gW8OFKeBttO3zUwCCxpIn9qunwDiFqvlkQHgI
xVqC5Yp1oMqq5enYlLGLqnCahYuUXgBW91uyEpeB4hzZMhU2CTgei0bzHdu5xDE4
5ZDks2EZ7CibJJ2EKwWgIF8iVkpepdXj0Wpy7HT6FStR2/kauT58h36bLzhjbh54
GtD3Z5TDtV8lrabOfmk6pA==
=v6MG
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"The majority of this batch is conversion of the PWM period and duty
cycle to 64-bit unsigned integers, which is required so that some
types of hardware can generate the full range of signals that they're
capable of.
The remainder is mostly minor fixes and cleanups"
* tag 'pwm/for-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: bcm-iproc: handle clk_get_rate() return
pwm: Replace HTTP links with HTTPS ones
pwm: omap-dmtimer: Repair pwm_omap_dmtimer_chip's broken kerneldoc header
pwm: mediatek: Provide missing kerneldoc description for 'soc' arg
pwm: bcm-kona: Remove impossible comparison when validating duty cycle
pwm: bcm-iproc: Remove impossible comparison when validating duty cycle
pwm: iqs620a: Use lowercase hexadecimal literals for consistency
pwm: Convert period and duty cycle to u64
clk: pwm: Use 64-bit division function
backlight: pwm_bl: Use 64-bit division function
pwm: sun4i: Use nsecs_to_jiffies to avoid a division
pwm: sifive: Use 64-bit division macro
pwm: iqs620a: Use 64-bit division
pwm: imx27: Use 64-bit division macro
pwm: imx-tpm: Use 64-bit division macro
pwm: clps711x: Use 64-bit division macro
hwmon: pwm-fan: Use 64-bit division macro
drm/i915: Use 64-bit division macro
The caller does this now for all reset types. This is now
a duplicate call.
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When we reset the GPU, note what type of reset will be
used. This makes debugging different reset scenarios
more clear as the driver may use different reset
methods depending on conditions on the system.
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ACPI, ROM, PCI BAR, etc.
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCXzaSXAAKCRCAXGG7T9hj
vuSEAP4qOIv7Hr1wMJfTsN7ZoNNr/K6ph8ADcjFm9RGikn8MawD8CU/OfcFKJFwl
UVwM1HPnRG6pvCI9bmHS4WYrIBYBVw0=
=Bi6R
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.9-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull more xen updates from Juergen Gross:
- Remove support for running as 32-bit Xen PV-guest.
32-bit PV guests are rarely used, are lacking security fixes for
Meltdown, and can be easily replaced by PVH mode. Another series for
doing more cleanup will follow soon (removal of 32-bit-only pvops
functionality).
- Fixes and additional features for the Xen display frontend driver.
* tag 'for-linus-5.9-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
drm/xen-front: Pass dumb buffer data offset to the backend
xen: Sync up with the canonical protocol definition in Xen
drm/xen-front: Add YUYV to supported formats
drm/xen-front: Fix misused IS_ERR_OR_NULL checks
xen/gntdev: Fix dmabuf import with non-zero sgt offset
x86/xen: drop tests for highmem in pv code
x86/xen: eliminate xen-asm_64.S
x86/xen: remove 32-bit Xen PV guest support
Use the same case as sienna_cichlid
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only SIENNA_CICHLID(VCN3) has 2 unsymmetrical instances, there're less
codecs on instance 1, we use 0 for decode and 1 for encode.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The target is to provide a clear entry point(for power routines).
Also this can help to maintain a clear view about the frameworks
used on different ASICs. Hopefully all these can make power part
more friendly to play with.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As other power interfaces.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The caller needs not care about the internal details how the powerplay
API implemented.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's redundant. Also, the callers should not care about
the implementation details.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cover the implementation details from outside(of power part).
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As these are already defined in amdgpu_atombios.h. Otherwise, we may
hit "redefined" compile warning.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Suppress the warning below:
In file included from drivers/gpu/drm/amd/amdgpu/../powerplay/smu_cmn.c:
>> drivers/gpu/drm/amd/powerplay/smu_cmn.c:485:9: warning: Identical condition 'ret', second condition is always false [identicalConditionAfterEarlyExit]
return ret;
^
drivers/gpu/drm/amd/powerplay/smu_cmn.c:477:6: note: first condition
if (ret)
^
drivers/gpu/drm/amd/powerplay/smu_cmn.c:485:9: note: second condition
return ret;
^
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It can avoid potential build warn/error when
CONFIG_DEBUG_FS is not set.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The whole approach wasn't thought through till the end.
We already had a reset lock like this in the past and it caused the same problems like this one.
Completely revert the patch for now and add individual trylock protection to the hardware access functions as necessary.
This reverts commit df9c8d1aa2.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Support Sienna Cichlid mgpu fan boost enablement.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Support Navi1X mgpu fan boost enablement.
V2: rich the comment and correct the revision id check
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable mgpu fan boost feature on swSMU routines.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cover the implementation details from outside(of power). Also preparing
for expanding this to swSMU.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when function arcturus_get_smu_metrics_data() call failed,
it will cause the variable "throttler_status" isn't initialized before use.
warning:
powerplay/arcturus_ppt.c:2268:24: warning: ‘throttler_status’ may be used uninitialized in this function [-Wmaybe-uninitialized]
2268 | if (throttler_status & logging_label[throttler_idx].feature_mask) {
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
gfxoff is temporarily disabled for navy_flounder,
since at present the feature has broken some basic
amdgpu test.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To fit the latest SMU firmware.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of having one copy in each ASIC.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To make the setting same as Arcturus/Navi1x/Sienna_Cichlid.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add more function pointers to amdgpu_mmhub_funcs. ASIC specific
implementation of most mmhub functions are called from a general
function pointer, instead of calling different function for
different ASIC. Simplify the code by deleting duplicate functions
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After amdgpu driver loading successfully, we can use
RAP debugfs interface <debugfs_dir>/dri/xxx/rap_test
to trigger RAP test.
Currently only L0 validate test is supported.
v2: refine amdgpu_rap.h
Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com>
Reviewed-by: Guchun Chen <Guchun.Chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The RAP TA contains tests used to verify if
RAP(Register Access Policy), or otherwise known
as Security Policy is applied correctly
by PSP BL&TOS.
The RAP test is a measure to ensure that we reduce
the avenue of complexity and mistakes when dealing
with RAP in post-si execution, where debugging failures
related to RAP is quite difficult and expensive.
v2: add introduction for RAP TA
Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com>
Reviewed-by: Guchun Chen <Guchun.Chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On Navi1x, the SPM golden settings are lost after GFXOFF
enter/exit, so reconfigure the golden settings after GFXOFF
exit.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On Navi1x, the SPM golden settings are lost after GFXOFF
enter/exit, so reconfiguration is needed. Make the
configuration code as an interface for future use.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Before ras recovery is issued, user could operate this debugfs
node to enable/disable the harvest of all RAS IPs' ras error
count registers, which will help keep hardware's registers'
status instead of cleaning up them.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Once ras recovery is issued by ras sync flood interrupt or
ras controller interrupt, add this guard to bypass or execute
ras error count register harvest of all IPs.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
While importing a dmabuf it is possible that the data of the buffer
is put with offset which is indicated by the SGT offset.
Respect the offset value and forward it to the backend.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
The MCDE DSI link hardware which is modeled like a bridge
in DRM, connected further to the panel bridge, creating
a pipeline.
We have been using the .pre_enable(), .enable(),
.disable() and .post_disable() callbacks from the bridge
to set this up in a chained manner: first the display
controller goes online and then in successive order
each bridge in the pipeline. Inside DRM it works
like this:
drm_atomic_helper_commit_tail()
drm_atomic_helper_commit_modeset_enables()
struct drm_crtc_helper_funcs .atomic_enable()
struct drm_simple_display_pipe_funcs .enable()
MCDE display enable call
drm_atomic_bridge_chain_enable()
struct drm_bridge_funcs .pre_enable()
mcde_dsi_bridge_pre_enable()
panel_bridge_pre_enable()
struct drm_panel_funcs .prepare()
struct drm_bridge_funcs .enable()
mcde_dsi_bridge_enable()
panel_bridge_enable()
struct drm_panel_funcs .enable()
A similar sequence is executed for disabling.
Unfortunately this is not what the hardware needs: at
a certain stage in the enablement of the display
controller the DSI link needs to come up to support
video mode, else something (like a FIFO flow) locks
up the hardware and we never get picture.
Fix this by simply leaving the pre|enable and
post|disable callbacks unused, and establish two
cross-calls from the display controller to bring up
the DSI link at the right place in the display
bring-up sequence and vice versa in the shutdown
sequence.
For command mode displays, it works just fine to
also enable the display flow early. The only time
we hold it back right now is in one-shot mode,
on-demand display updates.
When combined with the previous patch and some patches
for the S6E63M0 display controller to support DSI
mode, this gives working display on the Samsung
GT-I8190 (Golden) phone. It has also been tested working
on the Samsung GT-S7710 (Skomer) phone.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: newbytee@protonmail.com
Cc: Stephan Gerhold <stephan@gerhold.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200808223122.1492124-4-linus.walleij@linaro.org
To make sure that the MCDE is in a reasonable state during
set-up, perform a reset by power cycling the block by dropping
the on-chip regulator reference after probe. The display
subsystem (DSS) has no dedicated reset line so dropping
the EPOD regulator is the only real way of resetting it.
We introduce code to enable and disable the regulator in
the display enable/disable callbacks.
We move the generic MCDE setup such as muxing of DPI
signals and masking of interrupts to the display
handling.
When we drop the power to the whole display subsystem, not
only MCDE but also the DSI links lose their state. Therefore
we move the DSI block reset and hardware initialization
code to the mcde_dsi_bridge_pre_enable() callback so this
happens every time we start up the bridge, as we may have
lost the power.
We move the final disablement of the interrupts and
clocks to the mcde_dsi_bridge_post_disable() callback
rather than have it in the mcde_dsi_bridge_disable()
callback, as some control messages may still be sent
over the DSI host after the bridge has been shut down.
This (together with a patch for the corresponding
panel) makes the Samsung GT-S7710 successfully disable
and re-enable its display, cutting all power while
disabled and re-initializing the hardware when coming
back up.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: newbytee@protonmail.com
Cc: Stephan Gerhold <stephan@gerhold.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200808223122.1492124-3-linus.walleij@linaro.org
The pixel fetcher FIFO depth was just hardcoded to 48
which works fine as long as the framebuffer is 32BPP
and the DSI output is RGB888.
We will need more elaborate handling for some buffer
formats and displays, so start to improve this function
by setting reasonable defaults for 32, 24 and 16 BPP
framebuffers.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: newbytee@protonmail.com
Cc: Stephan Gerhold <stephan@gerhold.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200808223122.1492124-1-linus.walleij@linaro.org
Revamp the way that the flow of data to the display is
defined.
I realized that the hardware supports something like
5 different modes of flow: oneshot, command with TE IRQ,
command with BTA (bus turn around) and TE IRQ, video
with TE IRQ and video without TE IRQ instead synchronizing
to the output of the MCDE DSI formatter.
Like before the selection of the type of flow is done
from the DSI driver when we attach it to the MCDE and we
get to know what the display wants.
The new video mode synchronization method from the MCDE DSI
formatter is used on some upstream devices such as Golden.
This is the new default for video mode: stateless panels
do not as a rule generate TE IRQs.
Another semantic change is that we stop sending
a TE request before every command when sending data to
a display in command mode: this should only be explicitly
requested when using BTA, according to the vendor driver.
This has been tested and works fine with the command mode
displays I have. (All that are supported upstream.)
Reported-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Cc: Stephan Gerhold <stephan@gerhold.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200729090915.252730-2-linus.walleij@linaro.org
The function mcde_display_send_one_frame() has a historical
name that stems from being implemented when the driver
only supported single frame updates.
Rename it mcde_start_flow() so that it reflects the current
usage.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200729090915.252730-1-linus.walleij@linaro.org
Add YUYV to supported formats, so the frontend can work with the
formats used by cameras and other HW.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://lore.kernel.org/r/20200813062113.11030-4-andr2000@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
The patch c575b7eeb8: "drm/xen-front: Add support for Xen PV
display frontend" from Apr 3, 2018, leads to the following static
checker warning:
drivers/gpu/drm/xen/xen_drm_front_gem.c:140 xen_drm_front_gem_create()
warn: passing zero to 'ERR_CAST'
drivers/gpu/drm/xen/xen_drm_front_gem.c
133 struct drm_gem_object *xen_drm_front_gem_create(struct drm_device *dev,
134 size_t size)
135 {
136 struct xen_gem_object *xen_obj;
137
138 xen_obj = gem_create(dev, size);
139 if (IS_ERR_OR_NULL(xen_obj))
140 return ERR_CAST(xen_obj);
Fix this and the rest of misused places with IS_ERR_OR_NULL in the
driver.
Fixes: c575b7eeb8: "drm/xen-front: Add support for Xen PV display frontend"
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200813062113.11030-3-andr2000@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Add missing include to fix build error:
hibmc_drm_drv.c:385:1: warning: data definition has no type or storage
class [enabled by default]
hibmc_drm_drv.c:385:1: error: type defaults to ‘int’ in declaration
of ‘module_init’ [-Werror=implicit-int]
hibmc_drm_drv.c:385:1: warning: parameter names (without types) in function
of ‘module_exit’ [-Werror=implicit-int]
hibmc_drm_drv.c:385:292:1: warning: parameter names (without types) in
function declaration [enabled by default]
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1597289955-27381-1-git-send-email-tiantao6@hisilicon.com
Add very basic driver for Toshiba TC358762 DSI-to-DPI bridge, derived
from tc358764 driver and panel-raspberrypi-touchscreen. This driver is
meant to replace the panel-raspberrypi-touchscreen too, as the bridge
connection can be described in DT too.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: dri-devel@lists.freedesktop.org
Cc: Eric Anholt <eric@anholt.net>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: devicetree@vger.kernel.org
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam.ravnborg@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200809105705.6334-2-marex@denx.de
core:
- Fix drm_dp_mst_port refcount leaks in drm_dp_mst_allocate_vcpi
- Remove null check for kfree in drm_dev_release.
- Fix DRM_FORMAT_MOD_AMLOGIC_FBC definition.
- re-added docs for drm_gem_flink_ioctl()
- add orientation quirk for ASUS T103HAF
ttm:
- ttm: fix page-offset calculation within TTM
- revert patch causing vmwgfx regressions
fbcon:
- Fix a fbcon OOB read in fbdev, found by syzbot.
vga:
- Mark vga_tryget static as it's not used elsewhere.
amdgpu:
- Re-add spelling typo fix
- Sienna Cichlid fixes
- Navy Flounder fixes
- DC fixes
- SMU i2c fix
- Power fixes
vmwgfx:
- regression fixes for modesetting crashes
- misc fixes
xlnx:
- Small fixes to xlnx.
omap:
- Fix mode initialization in omap_connector_mode_valid().
- force runtime PM suspend on system suspend
tidss:
- fix modeset init for DPI panels
-----BEGIN PGP SIGNATURE-----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=dr7v
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2020-08-12' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"This has a few vmwgfx regression fixes we hit from the merge window
(one in TTM), it also has a bunch of amdgpu fixes along with a
scattering everywhere else.
core:
- Fix drm_dp_mst_port refcount leaks in drm_dp_mst_allocate_vcpi
- Remove null check for kfree in drm_dev_release.
- Fix DRM_FORMAT_MOD_AMLOGIC_FBC definition.
- re-added docs for drm_gem_flink_ioctl()
- add orientation quirk for ASUS T103HAF
ttm:
- ttm: fix page-offset calculation within TTM
- revert patch causing vmwgfx regressions
fbcon:
- Fix a fbcon OOB read in fbdev, found by syzbot.
vga:
- Mark vga_tryget static as it's not used elsewhere.
amdgpu:
- Re-add spelling typo fix
- Sienna Cichlid fixes
- Navy Flounder fixes
- DC fixes
- SMU i2c fix
- Power fixes
vmwgfx:
- regression fixes for modesetting crashes
- misc fixes
xlnx:
- Small fixes to xlnx.
omap:
- Fix mode initialization in omap_connector_mode_valid().
- force runtime PM suspend on system suspend
tidss:
- fix modeset init for DPI panels"
* tag 'drm-next-2020-08-12' of git://anongit.freedesktop.org/drm/drm: (70 commits)
drm/ttm: revert "drm/ttm: make TT creation purely optional v3"
drm/vmwgfx: fix spelling mistake "Cant" -> "Can't"
drm/vmwgfx: fix spelling mistake "Cound" -> "Could"
drm/vmwgfx/ldu: Use drm_mode_config_reset
drm/vmwgfx/sou: Use drm_mode_config_reset
drm/vmwgfx/stdu: Use drm_mode_config_reset
drm/vmwgfx: Fix two list_for_each loop exit tests
drm/vmwgfx: Use correct vmw_legacy_display_unit pointer
drm/vmwgfx: Use struct_size() helper
drm/amdgpu: Fix bug where DPM is not enabled after hibernate and resume
drm/amd/powerplay: put VCN/JPEG into PG ungate state before dpm table setup(V3)
drm/amd/powerplay: update swSMU VCN/JPEG PG logics
drm/amdgpu: use mode1 reset by default for sienna_cichlid
drm/amdgpu/smu: rework i2c adpater registration
drm/amd/display: Display goes blank after inst
drm/amd/display: Change null plane state swizzle mode to 4kb_s
drm/amd/display: Use helper function to check for HDMI signal
drm/amd/display: AMD OUI (DPCD 0x00300) skipped on some sink
drm/amd/display: Fix logger context
drm/amd/display: populate new dml variable
...
Backmerging drm-next into drm-misc-next for nouveau and panel updates.
Resolves a conflict between ttm and nouveau, where struct ttm_mem_res got
renamed to struct ttm_resource.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Merge more updates from Andrew Morton:
- most of the rest of MM (memcg, hugetlb, vmscan, proc, compaction,
mempolicy, oom-kill, hugetlbfs, migration, thp, cma, util,
memory-hotplug, cleanups, uaccess, migration, gup, pagemap),
- various other subsystems (alpha, misc, sparse, bitmap, lib, bitops,
checkpatch, autofs, minix, nilfs, ufs, fat, signals, kmod, coredump,
exec, kdump, rapidio, panic, kcov, kgdb, ipc).
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (164 commits)
mm/gup: remove task_struct pointer for all gup code
mm: clean up the last pieces of page fault accountings
mm/xtensa: use general page fault accounting
mm/x86: use general page fault accounting
mm/sparc64: use general page fault accounting
mm/sparc32: use general page fault accounting
mm/sh: use general page fault accounting
mm/s390: use general page fault accounting
mm/riscv: use general page fault accounting
mm/powerpc: use general page fault accounting
mm/parisc: use general page fault accounting
mm/openrisc: use general page fault accounting
mm/nios2: use general page fault accounting
mm/nds32: use general page fault accounting
mm/mips: use general page fault accounting
mm/microblaze: use general page fault accounting
mm/m68k: use general page fault accounting
mm/ia64: use general page fault accounting
mm/hexagon: use general page fault accounting
mm/csky: use general page fault accounting
...
After the cleanup of page fault accounting, gup does not need to pass
task_struct around any more. Remove that parameter in the whole gup
stack.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Link: http://lkml.kernel.org/r/20200707225021.200906-26-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The object flags created in radeon_ttm_placement_from_domain take care that
we use the correct caching for AGP, this is just superflous.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/384336/?series=80346&rev=1
The names get/put are associated with reference counting
in the Linux kernel, use alloc/free instead.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/384340/?series=80346&rev=1
The memory used to be allocated with devres helpers and released
automatically. In rare circumstances, the memory's release could
have happened before the DRM device got released, which would have
caused memory corruption of some kind. Now we're embedding the data
structures in struct hibmc_drm_private. The whole release problem
has been resolved, because struct hibmc_drm_private is allocated
with drmm_kzalloc and always released with the DRM device.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1597218179-3938-3-git-send-email-tiantao6@hisilicon.com
The drm_mode_config_reset patches are very important fixing a recently
introduced kernel crash, the others fix various older issues which are
a bit less serious in practice.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: "Roland Scheidegger (VMware)" <rscheidegger.oss@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200812005941.19465-1-rscheidegger.oss@gmail.com
IRQ bypass support for vdpa and IFC
MLX5 vdpa driver
Endian-ness fixes for virtio drivers
Misc other fixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl8yVEwPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpNPEH/0Dtq1s1V4r/kxtLUoMophv9wuORpWCr98BQ
2aOveTmwTOVdZVOiw2tzTgO9nbWx+cL2HvkU7Aajfpz5hh93Z2VOo2n4a7hBC79f
rlc3GXiG+pMk5RfmqGofIHTU+D6ony4D5SXlUDurLdtEwunyuqZwABiWkZjdclZJ
bv90IL8Upzbz0rxYr7k3z8UepdOCt7r4QS/o7STHZBjJRyylxmO/R2yTnh6PtpRK
Q/z35wJBJ3SKc8X3Fi0VOOSeGNZOiypkkl9ZnLVY5lExNAU1+2MMn2UK119SlCDV
MSxb7quYFF4cksXH1g77GMBNi1uADRh1dtFMZdkKhZGljGxKLxo=
=6VTZ
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- IRQ bypass support for vdpa and IFC
- MLX5 vdpa driver
- Endianness fixes for virtio drivers
- Misc other fixes
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (71 commits)
vdpa/mlx5: fix up endian-ness for mtu
vdpa: Fix pointer math bug in vdpasim_get_config()
vdpa/mlx5: Fix pointer math in mlx5_vdpa_get_config()
vdpa/mlx5: fix memory allocation failure checks
vdpa/mlx5: Fix uninitialised variable in core/mr.c
vdpa_sim: init iommu lock
virtio_config: fix up warnings on parisc
vdpa/mlx5: Add VDPA driver for supported mlx5 devices
vdpa/mlx5: Add shared memory registration code
vdpa/mlx5: Add support library for mlx5 VDPA implementation
vdpa/mlx5: Add hardware descriptive header file
vdpa: Modify get_vq_state() to return error code
net/vdpa: Use struct for set/get vq state
vdpa: remove hard coded virtq num
vdpasim: support batch updating
vhost-vdpa: support IOTLB batching hints
vhost-vdpa: support get/set backend features
vhost: generialize backend features setting/getting
vhost-vdpa: refine ioctl pre-processing
vDPA: dont change vq irq after DRIVER_OK
...
Including:
- Removal of the dev->archdata.iommu (or similar) pointers from
most architectures. Only Sparc is left, but this is private to
Sparc as their drivers don't use the IOMMU-API.
- ARM-SMMU Updates from Will Deacon:
- Support for SMMU-500 implementation in Marvell
Armada-AP806 SoC
- Support for SMMU-500 implementation in NVIDIA Tegra194 SoC
- DT compatible string updates
- Remove unused IOMMU_SYS_CACHE_ONLY flag
- Move ARM-SMMU drivers into their own subdirectory
- Intel VT-d Updates from Lu Baolu:
- Misc tweaks and fixes for vSVA
- Report/response page request events
- Cleanups
- Move the Kconfig and Makefile bits for the AMD and Intel
drivers into their respective subdirectory.
- MT6779 IOMMU Support
- Support for new chipsets in the Renesas IOMMU driver
- Other misc cleanups and fixes (e.g. to improve compile test
coverage)
-----BEGIN PGP SIGNATURE-----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=3O2Z
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Remove of the dev->archdata.iommu (or similar) pointers from most
architectures. Only Sparc is left, but this is private to Sparc as
their drivers don't use the IOMMU-API.
- ARM-SMMU updates from Will Deacon:
- Support for SMMU-500 implementation in Marvell Armada-AP806 SoC
- Support for SMMU-500 implementation in NVIDIA Tegra194 SoC
- DT compatible string updates
- Remove unused IOMMU_SYS_CACHE_ONLY flag
- Move ARM-SMMU drivers into their own subdirectory
- Intel VT-d updates from Lu Baolu:
- Misc tweaks and fixes for vSVA
- Report/response page request events
- Cleanups
- Move the Kconfig and Makefile bits for the AMD and Intel drivers into
their respective subdirectory.
- MT6779 IOMMU Support
- Support for new chipsets in the Renesas IOMMU driver
- Other misc cleanups and fixes (e.g. to improve compile test coverage)
* tag 'iommu-updates-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (77 commits)
iommu/amd: Move Kconfig and Makefile bits down into amd directory
iommu/vt-d: Move Kconfig and Makefile bits down into intel directory
iommu/arm-smmu: Move Arm SMMU drivers into their own subdirectory
iommu/vt-d: Skip TE disabling on quirky gfx dedicated iommu
iommu: Add gfp parameter to io_pgtable_ops->map()
iommu: Mark __iommu_map_sg() as static
iommu/vt-d: Rename intel-pasid.h to pasid.h
iommu/vt-d: Add page response ops support
iommu/vt-d: Report page request faults for guest SVA
iommu/vt-d: Add a helper to get svm and sdev for pasid
iommu/vt-d: Refactor device_to_iommu() helper
iommu/vt-d: Disable multiple GPASID-dev bind
iommu/vt-d: Warn on out-of-range invalidation address
iommu/vt-d: Fix devTLB flush for vSVA
iommu/vt-d: Handle non-page aligned address
iommu/vt-d: Fix PASID devTLB invalidation
iommu/vt-d: Remove global page support in devTLB flush
iommu/vt-d: Enforce PASID devTLB field mask
iommu: Make some functions static
iommu/amd: Remove double zero check
...
