Novatek NT36672a is a generic DSI IC that drives command and video mode
panels. Add the driver for it.
Right now adding support for some Poco F1 phones that have an LCD panel
from Tianma connected with this IC, with a resolution of 1080x2246 that
operates in DSI video mode.
During testing, Benni Steini <bennisteinir@gmail.com> helped us fix
the reset sequence timing (from 10ms to 20ms), to get the bootanimation
to work on Android.
With current AOSP, we need to increase it to 200ms - this seems to be a
safe high value to avoid a white screen occasionally.
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Benni Steini <bennisteinir@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200902064407.30712-3-sumit.semwal@linaro.org
The panel is able to work when dsi clock is non-continuous, thus
the system power consumption can be reduced using such feature.
Add MIPI_DSI_CLOCK_NON_CONTINUOUS to panel's mode_flags.
Changes in v2:
- Added my signed-off
Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200922074253.28810-1-yannick.fertre@st.com
The panel is able to receive commands in LP. The current hack to
force backlight commands in HS was due to workaround an incorrect
settings on DSI controller that prevents sending LP commands while
video out was active.
Remove the hack that forces HS commands.
Changes in v2:
- Added my signed-off
Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200922074242.28719-1-yannick.fertre@st.com
The panel is able to work when dsi clock is non-continuous, thus
the system power consumption can be reduced using such feature.
Add MIPI_DSI_CLOCK_NON_CONTINUOUS to panel's mode_flags.
Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200918114736.11322-1-yannick.fertre@st.com
This eliminates the following sparse warning:
drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c:217:15: warning: symbol
'vint_table' was not declared. Should it be static?
While at it, make the table const as it is never modified.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200916132301.2914017-1-yanaijie@huawei.com
Kbuild warns when this file is built as a loadable module:
WARNING: modpost: missing MODULE_LICENSE() in drivers/gpu/drm/panel/panel-samsung-s6e63m0.o
Add the missing license/author/description tags.
Fixes: b7b23e4476 ("drm/panel: s6e63m0: Break out SPI transport")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200909134137.32284-1-yuehaibing@huawei.com
The upstream S6E63M0 driver has some peculiarities around
the prepare/enable disable/unprepare sequence: the screen
is taken out of sleep in prepare() as part of
s6e63m0_init() the put to on with MIPI_DCS_SET_DISPLAY_ON
in enable().
However it is just put into sleep mode directly in
disable(). As disable()/enable() can be called without
unprepare()/prepare() being called, this is unbalanced,
we should take the display out of sleep in enable()
then turn it off().
Further MIPI_DCS_SET_DISPLAY_OFF is never called
balanced with MIPI_DCS_SET_DISPLAY_ON.
The vendor driver for Samsung GT-I8190 (Golden) does all
of these things in strict order.
Augment the driver to do exit sleep/set display on in
enable() and set display off/enter sleep in disable().
Further send an explicit reset pulse in power_on() so we
come up in a known state, and issue the MCS_ERROR_CHECK
command after setting display on like the vendor driver
does. Also use the timings from the vendor driver in
the sequence.
Doing all of these things makes the display much more
stable on the Samsung GT-I8190 when enabling/disabling
the display pipeline.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Cc: Stephan Gerhold <stephan@gerhold.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200817213906.88207-1-linus.walleij@linaro.org
We add code to identify a few different panels mounted
on the s6e63m0 controller. This is necessary to achieve
the proper biasing with DSI versions of the panel.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200809215104.1830206-5-linus.walleij@linaro.org
This adds code to send read commands to read a single
byte from the display, in order to perform MTP ID
look-up of the mounted panel on the s6e63m0 controller.
This is needed for proper biasing on the DSI variants.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200809215104.1830206-4-linus.walleij@linaro.org
This makes it possible to use the s6e63m0 panel with a
DSI host, such as in the Samsung GT-I8190 (Golden) mobile
phone.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200809215104.1830206-3-linus.walleij@linaro.org
This panel can be accessed using both SPI and DSI.
To make it possible to probe and use the device also from
a DSI bus, first break out the SPI support to its own file.
Since all the panel driver does is write DCS commands to
the panel, we pass a DCS write function to probe()
from each subdriver.
We make the Kconfig entry for SPI mode default so all
current users will continue to work.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/384873/
The OrtusTech COM43H4M85ULC panel is a 18-bit RGB panel. Commit
f098f168e9 ("drm: panel: Fix bus format for OrtusTech COM43H4M85ULC
panel") has fixed the bus formats, but forgot to address the bpc value.
Set it to 6.
Fixes: f098f168e9 ("drm: panel: Fix bus format for OrtusTech COM43H4M85ULC panel")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200824003254.21904-1-laurent.pinchart@ideasonboard.com
There is already a 'struct device' pointer in the drm_panel structure,
that we can access easily from our priv structure, so there's no need
for a separate 'dev' field there.
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200820121256.32037-3-paul@crapouillou.net
The drm_panel_of_backlight() function must be called after
drm_panel_init(), according to the function's documentation; otherwise
the backlight won't be properly initialized.
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200820121256.32037-2-paul@crapouillou.net
Standardize on the dev_ based logging and drop the include of drm_print.h.
Fix a few cases where "x@" was used when printing the mode.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Cc: Jerry Han <hanxu5@huaqin.corp-partner.google.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Icenowy Zheng <icenowy@aosc.io>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200815125406.1153224-6-sam@ravnborg.org
Standardize on the dev_ based logging and drop the include of drm_print.h.
Fix a few cases where "x@" was used when printing the mode.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200815125406.1153224-5-sam@ravnborg.org
Standardize on the dev_ based logging and drop the include of drm_print.h.
Fix a few cases where "x@" was used when printing the mode.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Cc: Robert Chiras <robert.chiras@nxp.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200815125406.1153224-4-sam@ravnborg.org
Standardize on the dev_ based logging and drop the include of drm_print.h.
Fix a few cases where "x@" was used when printing the mode.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200815125406.1153224-3-sam@ravnborg.org
Standardize on the dev_ based logging and drop the include of drm_print.h.
Fix a few cases where "x@" was used when printing the mode.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200815125406.1153224-2-sam@ravnborg.org
The panel orientation needs to parsed from a device-tree and assigned to
the panel's connector in order to make orientation property available to
userspace. That's what this patch does for the panel-simple driver.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200813215609.28643-5-digetx@gmail.com
The panel orientation needs to parsed from a device-tree and assigned to
the panel's connector in order to make orientation property available to
userspace. That's what this patch does for the generic LVDS panel.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200813215609.28643-4-digetx@gmail.com
This reads the DT setting for the panel rotation to set the panel
orientation in the get_modes callback.
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200813215609.28643-3-digetx@gmail.com
Feixin K101-IM2BYL02 is a new panel by Feixin designed as a replacement
to their K101-IM2BA02 panel. This panel utilizes the Ilitek ILI9881C
controller.
Add this panel's initialzation sequence and timing to ILI9881C driver.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200719171007.276383-2-icenowy@aosc.io
There're more panels with ILI9881C controller than the Bananapi one
supported by this driver.
Extract the mode and init sequence part, to prepare the driver for
adding new panels.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200719170411.275812-2-icenowy@aosc.io
Convert the Sharp LS020B1DD01D panel entry from using a struct
display_timing to using a struct drm_display_mode, as display_timing
seems to be the old and legacy format.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200811002240.55194-4-paul@crapouillou.net
If you pass a string that is not terminated with a carriage return to
dev_err(), it will eventually be printed with a carriage return, but
not right away, since the kernel will wait for a pr_cont().
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200811002240.55194-3-paul@crapouillou.net
Instead of manipulating the backlight directly in this driver, register
it in the probe using drm_panel_of_backlight() and let the drm_panel
framework code handle it.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200811002240.55194-2-paul@crapouillou.net
Backmerging drm-next into drm-misc-next for nouveau and panel updates.
Resolves a conflict between ttm and nouveau, where struct ttm_mem_res got
renamed to struct ttm_resource.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
In order to successfully read ID of the MTP panel the
panel MTP control page must be unlocked. Previously
this wasn't encountered because in the setup with this
panel the power wasn't ever really dropped. When power
gets dropped from the panel, MTP needs to be unlocked.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: newbytee@protonmail.com
Cc: Stephan Gerhold <stephan@gerhold.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200808224322.1507713-1-linus.walleij@linaro.org
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl8nLmkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGBEkH/RJAnEan4gcdkBDf
2xS0yk4XLMjKZwbz61VSeKMUBkGCsh1cWsaAtJJAIVYj/6o/7mld01sZCnOASLnJ
ET0nXL2NiT/f+prYkTE5qeYH225/Yfh5jgmrqZtx/uXFCwgE5Nzi3f72IXQDmCR+
kmpNhNox3YqQTKXhv7DXobDKcO0n8nZavnhxmA9SBZn2h9RHvmvJghD0UOfLjMpA
1SbknaE67n5JN/JjI6TkYWk4nuJmqfvmBL5IYVDEZYO4UlM5Bqzhw0XN7Ax70K3M
KRK/eiqRmNwun5MxWnbzQU7t7iTgVmzjHLTpWGcM3V4blgGXC3uhjc+p/R8KTQUE
bIydSzs=
=fDeo
-----END PGP SIGNATURE-----
Merge tag 'v5.8' into drm-next
I need to backmerge 5.8 as I've got a bunch of fixes sitting
on an rc7 base that I want to land.
Signed-off-by: Dave Airlie <airlied@redhat.com>
The function "int drm_panel_add(struct drm_panel *panel)"
always returns 0, this return value is meaningless.
Also, there is no need to check return value which calls
"drm_panel_add and", error branch code will never run.
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200801120216.8488-1-bernard@vivo.com
All panels shall report a connector type.
panel-simple has a lot of panels with no connector_type,
and for these fall back to DPI as the default.
v2:
- Rebased on top of validation of panel description
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200726203324.3722593-3-sam@ravnborg.org
Warn if we detect a panel with incomplete/wrong description.
This is inspired by a similar patch by Laurent that introduced checks
for LVDS panels - this extends the checks to the remaining type of
connectors.
This is known to warn for some of the existing panels but added
despite this as we need help from people using the panels to
add the missing info.
The checks are not complete but will catch the most common mistakes.
The checks at the same time serve as documentation for the minimum
required description for a panel.
The checks uses dev_warn() as we know this will hit. WARN() was
too noisy at the moment for anything else than LVDS.
v3:
- %d => %u for bpc (Laurent)
v2:
- Use dev_warn (Laurent)
- Check for empty bus_flags
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200726203324.3722593-2-sam@ravnborg.org
The boe,hv070wsa-100 panel is a LVDS panel.
Fix connector type to reflect this.
With this change users of this panel do not have to specify the
connector type.
v4:
- Add .bpc = 4 (Laurent)
v3:
- Drop PIXDATA bus_flag, not relevant
v2:
- Add .bus_format (Laurent)
- Add .bus_flags
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200703192417.372164-2-sam@ravnborg.org
On boe_nv133fhm_n62 (and presumably on boe_nv133fhm_n61) a scope shows
a small spike on the HPD line right when you power the panel on. The
picture looks something like this:
+--------------------------------------
|
|
|
Power ---+
+---
|
++ |
+----+| |
HPD -----+ +---------------------------+
So right when power is applied there's a little bump in HPD and then
there's small spike right before it goes low. The total time of the
little bump plus the spike was measured on one panel as being 8 ms
long. The total time for the HPD to go high on the same panel was
51.2 ms, though the datasheet only promises it is < 200 ms.
When asked about this glitch, BOE indicated that it was expected and
persisted until the TCON has been initialized.
If this was a real hotpluggable DP panel then this wouldn't matter a
whole lot. We'd debounce the HPD signal for a really long time and so
the little blip wouldn't hurt. However, this is not a hotpluggable DP
panel and the the debouncing logic isn't needed and just shows down
the time needed to get the display working. This is why the code in
panel_simple_prepare() doesn't do debouncing and just waits for HPD to
go high once. Unfortunately if we get unlucky and happen to poll the
HPD line right at the spike we can try talking to the panel before
it's ready.
Let's handle this situation by putting in a 15 ms prepare delay and
decreasing the "hpd absent delay" by 15 ms. That means:
* If you don't have HPD hooked up at all you've still got the
hardcoded 200 ms delay.
* If you've got HPD hooked up you will always wait at least 15 ms
before checking HPD. The only case where this could be bad is if
the panel is sharing a voltage rail with something else in the
system and was already turned on long before the panel came up. In
such a case we'll be delaying 15 ms for no reason, but it's not a
huge delay and I don't see any other good solution to handle that
case.
Even though the delay was measured as 8 ms, 15 ms was chosen to give a
bit of margin.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716132120.1.I01e738cd469b61fc9b28b3ef1c6541a4f48b11bf@changeid
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl8UzA4eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGQ7cH/3v+Gv+SmHJCvaT2
CSu0+7okVnYbY3UTb3hykk7/aOqb6284KjxR03r0CWFzsEsZVhC5pvvruASSiMQg
Pi04sLqv6CsGLHd1n+pl4AUYEaxq6k4KS3uU3HHSWxrahDDApQoRUx2F8lpOxyj8
RiwnoO60IMPA7IFJqzcZuFqsgdxqiiYvnzT461KX8Mrw6fyMXeR2KAj2NwMX8dZN
At21Sf8+LSoh6q2HnugfiUd/jR10XbfxIIx2lXgIinb15GXgWydEQVrDJ7cUV7ix
Jd0S+dtOtp+lWtFHDoyjjqqsMV7+G8i/rFNZoxSkyZqsUTaKzaR6JD3moSyoYZgG
0+eXO4A=
=9EpR
-----END PGP SIGNATURE-----
Merge v5.8-rc6 into drm-next
I've got a silent conflict + two trees based on fixes to merge.
Fixes a silent merge with amdgpu
Signed-off-by: Dave Airlie <airlied@redhat.com>
The FRD350H54004 panel was marked as having active-high VSYNC and HSYNC
signals, which sorts-of worked, but resulted in the picture fading out
under certain circumstances.
Fix this issue by marking VSYNC and HSYNC signals active-low.
v2: Rebase on drm-misc-next
Fixes: 7b6bd84336 ("drm/panel: simple: Add support for the Frida FRD350H54004 panel")
Cc: stable@vger.kernel.org # v5.5
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716125647.10964-1-paul@crapouillou.net
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200709184755.24798-1-grandmaster@al2klimov.de
The reset pin is inverted, so if we don't assert reset, the actual gpio
will be high and may keep driving the IO port of the panel.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701162928.1638874-12-megous@megous.com
The datasheet suggests to issue sleep in after display off
as a part of the panel's shutdown sequence.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701162928.1638874-11-megous@megous.com
Xingbangda XBD599 is a 5.99" 720x1440 MIPI-DSI LCD panel used in
PinePhone. Add support for it.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701162928.1638874-10-megous@megous.com
Calling sleep out and display on is a controller specific part
of the initialization process. Move it out of the panel specific
initialization function to the enable callback.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701162928.1638874-9-megous@megous.com
It's better than having it spread around the driver.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701162928.1638874-8-megous@megous.com
Parametrize the driver so that it can support more panels based
on st7703 controller.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701162928.1638874-7-megous@megous.com
This is done so that code that's not specific to a particular
jh057n panel is named after the controller. Functions specific
to the panel are kept named after the panel.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701162928.1638874-6-megous@megous.com
This rename is done so that the driver matches the name of the
display controller and in preparation for adding support for more
panels to the driver.
This is just a basic file rename, with no code changes.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701162928.1638874-5-megous@megous.com
Replace all uses of the legacy drm_bus_flags with their relevant
_SAMPLE_ variant.
This is a 1:1 replacement, no effort was made to validate the actual
bus flags for the panels.
Note:
DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE = DRM_BUS_FLAG_PIXDATA_NEGEDGE
DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE = DRM_BUS_FLAG_PIXDATA_POSEDGE
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200630180545.1132217-6-sam@ravnborg.org
Drop use of the legacy drm_bus_flags member and use the more descriptive
_SAMPLE_ variant.
No functional change.
Note:
DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE = DRM_BUS_FLAG_PIXDATA_NEGEDGE
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200630180545.1132217-5-sam@ravnborg.org
Only the MEDIA_BUS_FMT_RGB666_1X7X3_SPWG,
MEDIA_BUS_FMT_RGB888_1X7X4_SPWG and MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA bus
formats are valid for LVDS panels. Warn at probe time to catch the
common mistake of using an incorrect format, as well as discrepancies
between the bus format and the reported bpc.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200629233320.8774-5-laurent.pinchart+renesas@ideasonboard.com
The DRM bus flags reporting on which clock edge the pixel data and sync
signals are sampled or driven don't make sense for LVDS panels, as the
bus then uses sub-clock timings to send data. Drop those flags and add a
warning in the probe function to make sure the mistake won't be
repeated.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200629233320.8774-4-laurent.pinchart+renesas@ideasonboard.com
The Satoz SAT050AT40H12R2 panel is an LVDS panel, the
MEDIA_BUS_FMT_RGB888_1X24 bus format is thus incorrect. Set it to the
correct value MEDIA_BUS_FMT_RGB888_1X7X4_SPWG.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200629233320.8774-3-laurent.pinchart+renesas@ideasonboard.com
A few of the new panels create a local macro wrapping around
mipi_dsi_dcs_write. At the same time, they don't really care about the
command/payload split.
mipi_dsi_dcs_write does a kmalloc/memcpy/kfree for payload > 7 bytes.
Avoid that all together by using the _buffer function.
Aside:
panel-xinpeng-xpp055c272.c calls its wrapper "generic" although it
should be "dcs". But that for another day/patch.
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200505160329.2976059-2-emil.l.velikov@gmail.com
This patch adds missing BUS fields to the display panel descriptions of
the panels which are found on NVIDIA Tegra devices:
1. AUO B101AW03
2. Chunghwa CLAA070WP03XG
3. Chunghwa CLAA101WA01A
4. Chunghwa CLAA101WB01
5. Innolux N156BGE L21
6. Samsung LTN101NT05
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200621222742.25695-3-digetx@gmail.com
The EDT ET057090DHU panel has a DPI connector and not LVDS. This patch
corrects the panel's description.
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Fixes: 94f07917eb ("drm/panel-simple: Add missing connector type for some panels")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200621222742.25695-2-digetx@gmail.com
Add support for the CDTech Electronics displays S070PWS19HP-FC21
(7.0" WSVGA) and S070SWV29HG-DC44 (7.0" WVGA) to panel-simple.
Signed-off-by: Michael Krummsdorf <michael.krummsdorf@tq-group.com>
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200612072219.13669-4-matthias.schiffer@ew.tq-group.com
The LogicPD Type28 display used by several Logic PD products has not
worked since v5.6.
The connector type for the LogicPD Type 28 display is missing and
drm_panel_bridge_add() requires connector type to be set.
Signed-off-by: Adam Ford <aford173@gmail.com>
Fixes: 0d35408afb ("drm/panel: simple: Add Logic PD Type 28 display support")
Cc: Adam Ford <aford173@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.6+
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200615131934.12440-1-aford173@gmail.com
The DRM panel bridge core requires connector type to be set up properly,
otherwise it rejects the panel. The missing connector type problem popped
up while I was trying to wrap CLAA070WP03XG panel into a DRM bridge in
order to test whether panel's rotation property work properly using
panel-simple driver on NVIDIA Tegra30 Nexus 7 tablet device, which uses
CLAA070WP03XG display panel.
The NVIDIA Tegra DRM driver recently gained DRM bridges support for the
RGB output and now driver wraps directly-connected panels into DRM bridge.
Hence all panels should have connector type set properly now, otherwise
the panel's wrapping fails.
This patch adds missing connector types for the LVDS panels that are found
on NVIDIA Tegra devices:
1. AUO B101AW03
2. Chunghwa CLAA070WP03XG
3. Chunghwa CLAA101WA01A
4. Chunghwa CLAA101WB01
5. EDT ET057090DHU
6. Innolux N156BGE L21
7. Samsung LTN101NT05
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200617222703.17080-8-digetx@gmail.com
It's not necessary to unregister backlight device which
registered with devm_backlight_device_register().
Fixes: 12a6cbd4f3 ("drm/panel: otm8009a: Use new backlight API")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200618134650.44311-1-weiyongjun1@huawei.com
This patch adds support for Kaohsiung Opto-Electronics Inc.
10.1" TX26D202VM0BWA WUXGA(1920x1200) TFT LCD panel with LVDS interface.
The panel has dual LVDS channels.
My panel is manufactured by US Micro Products(USMP). There is a tag at
the back of the panel, which indicates the panel type is 'TX26D202VM0BWA'
and it's made by KOE in Taiwan.
The panel spec from USMP can be found at:
https://www.usmicroproducts.com/sites/default/files/datasheets/USMP-T101-192120NDU-A0.pdf
The below panel spec from KOE is basically the same to the one from USMP.
However, the panel type 'TX26D202VM0BAA' is a little bit different.
It looks that the two types of panel are compatible with each other.
http://www.koe.j-display.com/upload/product/TX26D202VM0BAA.pdf
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1590991880-24273-1-git-send-email-victor.liu@nxp.com
None of the DSI panels set the connector_type in their panel_desc
descriptor. As they are all guaranteed to be DSI panels, that's an easy
fix, set the connector type to DRM_MODE_CONNECTOR_DSI.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200602171240.2785-1-laurent.pinchart+renesas@ideasonboard.com
People use panel-simple when they have panels that are builtin to
their device. In these cases the HPD (Hot Plug Detect) signal isn't
really used for hotplugging devices but instead is used for power
sequencing. Panel timing diagrams (especially for eDP panels) usually
have the HPD signal in them and it acts as an indicator that the panel
is ready for us to talk to it.
Sometimes the HPD signal is hooked up to a normal GPIO on a system.
In this case we need to poll it in the correct place to know that the
panel is ready for us. In some system designs the right place for
this is panel-simple.
When adding this support, we'll account for the case that there might
be a circular dependency between panel-simple and the provider of the
GPIO. The case this was designed for was for the "ti-sn65dsi86"
bridge chip. If HPD is hooked up to one of the GPIOs provided by the
bridge chip then in our probe function we'll always get back
-EPROBE_DEFER. Let's handle this by allowing this GPIO to show up
late if we saw -EPROBE_DEFER during probe. NOTE: since the
gpio_get_optional() is used, if the "hpd-gpios" isn't there our
variable will just be NULL and we won't do anything in prepare().
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200507143354.v5.3.I53fed5b501a31e7a7fa13268ebcdd6b77bd0cadd@changeid
All info I could find about this panel show that it behaves the same
as the BOE NV133FHM-N61. However, it definitely appears to be a
unique panel because reading the EDID shows "NV133FHM-N62". We'll add
a string match for the new panel but until we find something unique
about it we'll just point at the N61's structures.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200508155859.3.I525ebd471f5340a6a369af7bde06ef04174d2f41@changeid
The BOE NV133FHM-N61 is documented in the original commit to be a
13.3" panel, but the size listed in our struct doesn't match.
Specifically:
math.sqrt(30.0 * 30.0 + 18.7 * 18.7) / 2.54 ==> 13.92
Searching around on the Internet shows that the size that was in the
structure was the "Outline Size", not the "Display Area". Let's fix
it.
Also the Internet says that this panel supports 262K colors. That's
6bpp, not 8bpp.
Fixes: b0c664cc80 ("panel: simple: Add BOE NV133FHM-N61")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200508155859.1.I4d29651c0837b4095fb4951253f44036a371732f@changeid
This adds support for TMP5P5 NT35596 1080x1920 video
mode panel that can be found on some Asus Zenfone 2
Laser (Z00T) devices.
This panel seems to only be found in this device
and we have no straightforward way of actually
getting the correct model number, as no schematics
are released publicly.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[fixed checkpatch warnings]
Link: https://patchwork.freedesktop.org/patch/msgid/20200506210957.344590-2-konradybcio@gmail.com
fix boe_tv105wum_nw0 display shift.
Signed-off-by: David Lu <david.lu@bitland.com.cn>
Fixes: 963518c124 ("drm/panel: support for boe,tv105wum-nw0 dsi video mode panel")
Cc: David Lu <david.lu@bitland.com.cn>
Cc: Nicolas Boichat <drinkcat@chromium.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[added fixes tag]
Link: https://patchwork.freedesktop.org/patch/msgid/20200428064521.21511-1-david.lu@bitland.com.cn
The AUO G101EVN010 is a 18-bit LVDS panel, not a parallel panel, as
indicated by the current bus_format.
Fix the bus_format to MEDIA_BUS_FMT_RGB666_1X7X3_SPWG, and also set the
connector_type to LVDS.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[updated patch subject]
Link: https://patchwork.freedesktop.org/patch/msgid/20200417114043.25381-1-tomi.valkeinen@ti.com
drivers/gpu/drm/panel/panel-truly-nt35597.c:493:31: warning: variable ‘config’ set but not used [-Wunused-but-set-variable]
const struct nt35597_config *config;
^~~~~~
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417101401.19388-1-yuehaibing@huawei.com
