This code should use "vma[1]" instead of "vma". The "vma" variable is a
valid pointer.
Fixes: 6b05030496 ("drm/i915: Convert i915_gem_object/client_blt.c to use ww locking as well, v2.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200911075243.GG12635@kadam
(cherry picked from commit 68ba71e3ae)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This is the last part outside of selftests that still don't use the
correct lock ordering of timeline->mutex vs resv_lock.
With gem fixed, there are a few places that still get locking wrong:
- gvt/scheduler.c
- i915_perf.c
- Most if not all selftests.
Changes since v1:
- Add intel_engine_pm_get/put() calls to fix use-after-free when using
intel_engine_get_pool().
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-16-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
One i915_request_await_object is enough and we keep the one under the
object lock so it is final.
At the same time move async clflushing setup under the same locked
section and consolidate common code into a helper function.
v2:
* Emit initial breadcrumbs after aways are set up. (Chris)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200615151449.32605-1-tvrtko.ursulin@linux.intel.com
Be consistent, and even when we know we had used a WC, flush the mapped
object after writing into it. The flush understands the mapping type and
will only clflush if !I915_MAP_WC, but will always insert a wmb [sfence]
so that we can be sure that all writes are visible.
v2: Add the unconditional wmb so we are know that we always flush the
writes to memory/HW at that point.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200511141304.599-1-chris@chris-wilson.co.uk
Since the introduction of 'soft-rc6', we aim to park the device quickly
and that results in frequent idling of the whole device. Currently upon
idling we free the batch buffer pool, and so this renders the cache
ineffective for many workloads. If we want to have an effective cache of
recently allocated buffers available for reuse, we need to decouple that
cache from the engine powermanagement and make it timer based. As there
is no reason then to keep it within the engine (where it once made
retirement order easier to track), we can move it up the hierarchy to the
owner of the memory allocations.
v2: Hook up to debugfs/drop_caches to clear the cache on demand.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200430111819.10262-2-chris@chris-wilson.co.uk
On gen11 the XY_FAST_COPY_BLT command has some size restrictions on its
usage. Although this instruction is mainly used by userspace, i915 also
uses it to copy object contents during some selftests, so let's ensure
the restrictions are followed.
Bspec: 6544
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311162300.1838847-3-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Trying to use i915_request_skip() prior to i915_request_add() causes us
to try and fill the ring upto request->postfix, which has not yet been
set, and so may cause us to memset() past the end of the ring.
Instead of skipping the request immediately, just flag the error on the
request (only accepting the first fatal error we see) and then clear the
request upon submission.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200304121849.2448028-1-chris@chris-wilson.co.uk
There is nothing to say that the obj->base.size is actually a multiple
of the block_size.
v2: Use round_up() as block_size is a power-of-two
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191028220325.9325-1-chris@chris-wilson.co.uk
Currently we insert a arbitration point every 128MiB during a blitter
copy. At 8GiB/s, this is around 30ms. This is a little on the large side
if we need to inject a high priority work, so reduced it down to 8MiB or
roughly 1ms.
v2: Don't forget both fill/copy.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191028203012.14566-1-chris@chris-wilson.co.uk
Make sure that when submitting requests, we always serialize against
potential vma moves and clflushes.
Time for a i915_request_await_vma() interface!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190819112033.30638-1-chris@chris-wilson.co.uk
We can already clear an object with the blt, so try to do the same to
support copying from one object backing store to another. Really this is
just object -> object, which is not that useful yet, what we really want
is two backing stores, but that will require some vma rework first,
otherwise we are stuck with "tmp" objects.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190810174338.19810-1-chris@chris-wilson.co.uk
As pointed out by Chris, with our current approach we are actually
limited to S16_MAX * PAGE_SIZE for our size when using the blt to clear
pages. Keeping things simple try to fix this by reducing the copy to a
sequence of S16_MAX * PAGE_SIZE blocks.
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[ickle: hide the details of the engine pool inside emit_vma]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190810092945.2762-1-chris@chris-wilson.co.uk
Currently we just pass in bcs0->engine_context so it matters not, but in
the future we may want to pass in something that is not a
kernel_context, so try to be a bit more generic.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190810091748.10972-1-chris@chris-wilson.co.uk
Everything about the file is about display, and mostly about types
related to display. Move under display/ as intel_display_types.h to
reflect the facts.
There's still plenty to clean up, but start off with moving the file
where it logically belongs and naming according to contents.
v2: fix the include guard name in the renamed file
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190806113933.11799-1-jani.nikula@intel.com
Track the currently bound address space used by the HW context. Minor
conversions to use the local intel_context.vm are made, leaving behind
some more surgery required to make intel_context the primary through the
selftests.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190730143209.4549-2-chris@chris-wilson.co.uk
The plan is to use the blitter engine for async object clearing when
using local memory, but before we can move the worker to get_pages() we
have to first tame some more of our struct_mutex usage. With this in
mind we should be able to upstream the object clearing as some
selftests, which should serve as a guinea pig for the ongoing locking
rework and upcoming async get_pages() framework.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: CQ Tang <cq.tang@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190529123108.24422-2-matthew.auld@intel.com
