AUX power wells sometimes need additional handling besides just
programming the specific power well registers:
* Type-C PHY's also require additional Type-C register programming
* ICL combo PHY's require additional workarounds
* TGL & EHL combo PHY's can be treated like any other power well
Today we have dedicated aux ops for the ICL combo PHY and Type-C cases.
This works fine, but means that when a new platform shows up with
identical general power well handling, but different types of PHYs on
its outputs, we have to define an entire new power well table for that
platform and can't just re-use the table from the earlier platform -- as
an example, see ehl_power_wells[], which is a subset of
icl_power_wells[], *except* that we need to specify different AUX ops
for the third display.
If we instead create a single set of top-level aux ops that will check
the PHY type and then dispatch to the appropriate handlers, we can get
more reuse out of our power well definitions. This allows us to
immediately eliminate ehl_power_wells[] and simply reuse the ICL table;
if future platforms follow the same general power well assignments as
either ICL or TGL, we'll be able to re-use those tables in the same way.
Note that I've only changed ICL+ platforms over to using the new icl_aux
ops; at this point it's unlikely that we'll have any new platforms that
re-use gen9 or earlier power well configurations.
v2:
- ICL_AUX_PW_TO_PHY() won't return the proper PHY for TBT AUX power
wells. But we know those wells will only used on Type-C outputs
anyway, so we can just check is is_tc_tbt flag in the condition.
(Jose).
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415233435.3064257-2-matthew.d.roper@intel.com
We shouldn't try to do link retraining from the short hpd handler.
We can't take any modeset locks there so this is racy as hell.
Push the whole thing into the hotplug work like we do with SST.
We'll just have to adjust the SST retraining code to deal with
the MST encoders and multiple pipes.
TODO: I have a feeling we should just rip this all out and
do a full modeset instead. Stuff like port sync and the tgl+
MST master transcoder stuff maybe doesn't work well if we
try to retrain without following the proper modeset sequence.
So far haven't done any actual tests to confirm that though.
Cc: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417152734.464-2-ville.syrjala@linux.intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
Make intel_dp_check_mst_status() somewhat legible by humans.
Note that the return value of drm_dp_mst_hpd_irq() is always
either 0 or -ENOMEM, and we never did anything with the latter
so we can just ignore the whole thing.
We can also get rid of the direct drm_dp_mst_topology_mgr_set_mst(false)
call since returning -EINVAL causes the caller to do the very same call
for us.
Cc: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417152734.464-1-ville.syrjala@linux.intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
Pass the encoder all the way down to
intel_ddi_transcoder_func_reg_val_get(). Allows us eliminate the
intel_ddi_get_crtc_encoder() eyesore.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417134720.16654-4-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Push the TRANS_DDI_FUNC_CTL into the encoder enable hook. The disable
is already there, and as a followup will enable us to pass the encoder
all the way down.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417134720.16654-3-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jani Nikula <jani.nikula@intel.com>
No reason that I can see why we should enable TRANS_DDI_FUNC_CTL
before we set up the watermarks of configure the mbus stuff.
In fact reordering these seems to match the bspec sequence better,
and crucially will allow us to push the TRANS_DDI_FUNC_CTL enable
into the encoder enable hook as a followup.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417134720.16654-2-ville.syrjala@linux.intel.com
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Since intel_ddi_enable_pipe_clock() was pushed down into the
encoder hooks we can pass on the encoder instead of having
to use intel_ddi_get_crtc_encoder().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417134720.16654-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jani Nikula <jani.nikula@intel.com>
This was sort of annoying me:
random:~$ dmesg | tail -1
[523884.039227] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
random:~$ dmesg | grep -c "Reducing the compressed"
47
This patch makes it DRM_INFO_ONCE() just like the similar message
farther down in that function is pr_info_once().
Cc: stable@vger.kernel.org
Signed-off-by: Peter Jones <pjones@redhat.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1745
Link: https://patchwork.freedesktop.org/patch/msgid/20180706190424.29194-1-pjones@redhat.com
[vsyrjala: Rebase due to per-device logging]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Looks like I accidentally made it so you couldn't force DPCD backlight
support on, whoops. Fix that.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 17f5d57915 ("drm/i915: Force DPCD backlight mode on X1 Extreme 2nd Gen 4K AMOLED panel")
Cc: Adam Jackson <ajax@redhat.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200413214407.1851002-1-lyude@redhat.com
We have some module unload/reload tests hitting an issue with i915
unbinding the component interface before the audio driver has properly
put the power. Log an error about it for ease of debugging. (Normally
this leads to a wakeref debug splat on the power well.)
Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417065132.23048-1-jani.nikula@intel.com
The variable test_result is being initialized with a value that is
never read and it is being updated later with a new value. The
initialization is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417160829.112776-1-colin.king@canonical.com
Right now dp.regs.dp_tp_ctl/status are only set during the encoder
pre_enable() hook, what is causing all reads and writes to those
registers to go to offset 0x0 before pre_enable() is executed.
So if i915 takes the BIOS state and don't do a modeset any following
link retraing will fail.
In the case that i915 needs to do a modeset, the DDI disable sequence
will write to a wrong register not disabling DP 'Transport Enable' in
DP_TP_CTL, making a HDMI modeset in the same port/transcoder to
not light up the monitor.
So here for GENs older than 12, that have those registers fixed at
port offset range it is loading at encoder/port init while for GEN12
it will keep setting it at encoder pre_enable() and during HW state
readout.
Fixes: 4444df6e20 ("drm/i915/tgl: move DP_TP_* to transcoder")
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414230442.262092-1-jose.souza@intel.com
This is a expected timeout of static TC ports not conneceted, so
not throwing warnings that would taint CI.
v3:
- moved checks to tc_phy_aux_timeout_expected()
v4:
- moved and add comments to tc_phy_aux_timeout_expected()
v5:
- only checking tc_legacy_port for TC ports
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414194956.164323-8-jose.souza@intel.com
As described in "drm/i915/tc/icl: Implement TC cold sequences" users
of TC functions should held aux power well during access to avoid
read garbage due HW in TC cold state.
v3:
- renamed is_tc_cold_blocked() to assert_tc_cold_blocked()
- restored the removed 0xffffffff checks
Reviewed-by: Imre Deak <imre.deak@intel.com>
Tested-by: You-Sheng Yang <vicamo.yang@canonical.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414194956.164323-7-jose.souza@intel.com
TC ports can enter in TCCOLD to save power and is required to request
to PCODE to exit this state before use or read to TC registers.
For TGL there is a new MBOX command to do that with a parameter to ask
PCODE to exit and block TCCOLD entry or unblock TCCOLD entry.
So adding a new power domain to reuse the refcount and only allow
TC cold when all TC ports are not in use.
v2:
- fixed missing case in intel_display_power_domain_str()
- moved tgl_tc_cold_request to intel_display_power.c
- renamed TGL_TC_COLD_OFF to TGL_TC_COLD_OFF_POWER_DOMAINS
- added all TC and TBT aux power domains to
TGL_TC_COLD_OFF_POWER_DOMAINS
v3:
- added one msec sleep when PCODE returns -EAGAIN
- added timeout of 5msec to not loop forever if
sandybridge_pcode_write_timeout() keeps returning -EAGAIN
v4:
- Made failure to block or unblock TC cold a error
- removed 5msec timeout, instead giving PCODE 1msec by up 3 times to
recover from the internal error
v5:
- only sleeping 1msec when ret is -EAGAIN
BSpec: 49294
Cc: Imre Deak <imre.deak@intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414194956.164323-6-jose.souza@intel.com
As part of ICL TC cold exit sequences we need to request aux power
well before lock the access to TC ports, so skiping the
intel_tc_port_ref_held() check for TC legacy ports.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Tested-by: You-Sheng Yang <vicamo.yang@canonical.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414194956.164323-5-jose.souza@intel.com
This is required for legacy/static TC ports as IOM is not aware of
the connection and will not trigger the TC cold exit.
Just request PCODE to exit TCCOLD is not enough as it could enter
again before driver makes use of the port, to prevent it BSpec states
that aux powerwell should be held.
So here embedding the TC cold exit sequence into ICL aux enable,
it will enable aux and then request TC cold to exit.
The TC cold block(exit and aux hold) and unblock was added to some
exported TC functions for the others and to access PHY registers,
callers should enable and keep aux powerwell enabled during access.
Also adding TC cold check and warnig in tc_port_load_fia_params() as
at this point of the driver initialization we can't request power
wells, if we get this warning we will need to figure out how to handle
it.
v2:
- moved ICL TC cold exit function to intel_display_power
- using dig_port->tc_legacy_port to only execute sequences for legacy
ports, hopefully VBTs will have this right
- fixed check to call _hsw_power_well_continue_enable()
- calling _hsw_power_well_continue_enable() unconditionally in
icl_tc_phy_aux_power_well_enable(), if needed we will surpress timeout
warnings of TC legacy ports
- only blocking TC cold around fia access
v3:
- added timeout of 5msec to not loop forever if
sandybridge_pcode_write_timeout() keeps returning -EAGAIN
returning -EAGAIN in in icl_tc_cold_exit()
- removed leftover tc_cold_wakeref
- added one msec sleep when PCODE returns -EAGAIN
v4:
- removed 5msec timeout, instead giving 1msec to whoever is using
PCODE to finish it up to 3 times
- added a comment about turn TC cold exit failure as a error in future
BSpec: 21750
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1296
Cc: Imre Deak <imre.deak@intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414194956.164323-4-jose.souza@intel.com
This is a preparation for ICL TC cold exit sequences.
v2:
- renamed new functions to hsw_power_well_enable_prepare()/complete()
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Tested-by: You-Sheng Yang <vicamo.yang@canonical.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414194956.164323-3-jose.souza@intel.com
This is a similar function to intel_aux_power_domain() but it do not
care about TBT ports, this will be needed by ICL TC sequences.
v2:
- renamed to intel_legacy_aux_to_power_domain()
Cc: Imre Deak <imre.deak@intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Tested-by: You-Sheng Yang <vicamo.yang@canonical.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414194956.164323-2-jose.souza@intel.com
Moving the code to return the digital port of the aux channel also
removing the intel_phy_is_tc() to make it generic.
digital_port will be needed in icl_tc_phy_aux_power_well_enable()
so adding it as a parameter to icl_tc_port_assert_ref_held().
While at at removing the duplicated call to icl_tc_phy_aux_ch() in
icl_tc_port_assert_ref_held().
v2:
- fixed build when DRM_I915_DEBUG_RUNTIME_PM is not set
- moved to before hsw_wait_for_power_well_enable() as it will be
needed by hsw_wait_for_power_well_enable() in a future patch
v4:
- fixed action of if (!dig_port), continue instead of return
Cc: You-Sheng Yang <vicamo@gmail.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Tested-by: You-Sheng Yang <vicamo.yang@canonical.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414194956.164323-1-jose.souza@intel.com
Lets have a unified way to handle SAGV changes,
espoecially considering the upcoming Gen12 changes.
Current "standard" way of doing this in commit_tail
is pre/post plane updates, when everything which
has to be forbidden and not supported in new config
has to be restricted before update and relaxed after
plane update.
v2: - Removed unneeded returns(Ville)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415143911.10244-5-stanislav.lisovskiy@intel.com
Add correspondent helpers to be able to get old/new bandwidth
global state object.
v2: - Fixed typo in function call
v3: - Changed new functions naming to use convention proposed
by Jani Nikula, i.e intel_bw_* in intel_bw.c file.
v4: - Change function naming back to intel_atomic* pattern,
was decided to rename in a separate patch series.
v5: - Fix function naming to match existing practices(Ville)
v6: - Removed spurious whitespace
v7: - Removed bw_state NULL checks(Ville)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415143911.10244-3-stanislav.lisovskiy@intel.com
For certain DP VDSC bpp settings, hblank asserts before hblank_early,
leading to a bad audio state. Driver need to program "hblank early
enable" and "samples per line" parameters in AUDIO_CONFIG_BE
register.
This is Display Audio WA #1406928334 for 4k+VDSC usecase
applicable on DP encoders. Implemented the same.
v2: Fixed build failures on 32bit machine.
v3: Dropped u64, added helpers for sample room calculation,
other general comments as per Jani Nikula's feedback.
Also fixed connector type check (spotted by Anshuman)
v4: Addressed Jani Nikula and Kai's review comments.
v5: Addressed Anshuman's review comment and used crtc_* variable
to get timings.
v6: Dropped a redundant initialization.
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200416105419.9664-1-uma.shankar@intel.com
It requires a separate debugfs attribute to expose lpsp
status to user space, as there may be display less configuration
without any valid connected output, those configuration will not be
able to test lpsp status, if lpsp status exposed from a connector
based debugfs attribute.
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415170555.15531-5-anshuman.gupta@intel.com
Add connector debugfs attributes for each intel
connector which is getting register.
v2:
- adding connector debugfs for each connector in
intel_connector_register() to fix CI failure for legacy connectors.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415170555.15531-4-anshuman.gupta@intel.com
New i915_pm_lpsp igt solution approach relies on connector specific
debugfs attribute i915_lpsp_capability, it exposes whether an output is
capable of driving lpsp.
v2:
- CI fixup.
v3:
- register i915_lpsp_info only for supported connector. [Jani]
- use intel_display_power_well_is_enabled() instead of looking
inside power_well count. [Jani]
- fixes the lpsp capable conditional logic. [Jani]
- combined the lpsp capable and enable info. [Jani]
v4:
- Separate out connector based debugfs i915_lpsp_capability
lpsp enable status would be exposes by different entry. [Animesh]
v5:
- Add Platform Gen condition to add i915_lpsp_capability
and some cosmetic nitpick changes. [Animesh]
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415170555.15531-3-anshuman.gupta@intel.com
Gen11 onwards PG3 is contains functions for pipe B,
external displays, and VGA. It make sense to add
a power well id with name ICL_DISP_PW_3 rather then
TGL_DISP_PW_3, Also PG3 power well id requires to
know if lpsp is enabled.
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415170555.15531-2-anshuman.gupta@intel.com
As on ICL, we want to use the Type-C aux handlers for the TBT aux wells
to ensure the DP_AUX_CH_CTL_TBT_IO flag is set properly.
Fixes: 656409bbaf ("drm/i915/tgl: Add power well support")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415233435.3064257-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
The check was always succeeding even in case of a mismatch due to the
HDCP_STATUS_ENC bit being set. Make sure both bits are actually set.
Signed-off-by: Oliver Barta <oliver.barta@aptiv.com>
Fixes: 2320175feb ("drm/i915: Implement HDCP for HDMI")
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200328104100.12162-1-oliver.barta@aptiv.com
PLANE_CTL_FORMAT_AYUV is already supported, according to hardware
specification.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200407215546.5445-2-bob.j.paauwe@intel.com
Media decompression support should not be advertised on any display
planes for steppings A0-C0.
Bspec: 53273
Fixes: 2dfbf9d287 ("drm/i915/tgl: Gen-12 display can decompress surfaces compressed by the media engine")
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414211118.2787489-3-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Replace the TGL/ICL specific platform checks with a more generic check
using INTEL_GEN(). Fixes bug with broken audio after S3 resume on JSL
platforms.
An initial version of state save and restore of AUD_FREQ_CNTRL register
was added for subset of platforms in commit 87c1694533
("drm/i915: save AUD_FREQ_CNTRL state at audio domain suspend"). The state
save has proven to work well and it is needed in newer platforms, so needs
to be extended. Although the logic is not in practise needed on GEN9/10
systems, follow the hardware specification and apply state and restore on
all gen9+ platforms.
Bspec: 49281
Link: https://github.com/thesofproject/linux/issues/1719
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200330144421.11632-1-kai.vehmanen@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
legacy:
- fix drm_local_map.offset type
ttm:
- temporarily disable hugepages to debug amdgpu problems.
prime:
- fix sg extraction
amdgpu:
- Various Renoir fixes
- Fix gfx clockgating sequence on gfx10
- RAS fixes
- Avoid MST property creation after registration
- Various cursor/viewport fixes
- Fix a confusing log message about optional firmwares
i915:
- Flush all the reloc_gpu batch (Chris)
- Ignore readonly failures when updating relocs (Chris)
- Fill all the unused space in the GGTT (Chris)
- Return the right vswing table (Jose)
- Don't enable DDI IO power on a TypeC port in TBT mode for ICL+ (Imre)
analogix_dp:
- probe fix
virtio:
- oob fix in object create
-----BEGIN PGP SIGNATURE-----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=ZTAf
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2020-04-10' of git://anongit.freedesktop.org/drm/drm
Pull more drm fixes from Dave Airlie:
"As expected, more fixes did turn up in the latter part of the week.
The drm_local_map build regression fix is here, along with temporary
disabling of the hugepage work due to some amdgpu related crashes.
Otherwise it's just a bunch of i915, and amdgpu fixes.
legacy:
- fix drm_local_map.offset type
ttm:
- temporarily disable hugepages to debug amdgpu problems.
prime:
- fix sg extraction
amdgpu:
- Various Renoir fixes
- Fix gfx clockgating sequence on gfx10
- RAS fixes
- Avoid MST property creation after registration
- Various cursor/viewport fixes
- Fix a confusing log message about optional firmwares
i915:
- Flush all the reloc_gpu batch (Chris)
- Ignore readonly failures when updating relocs (Chris)
- Fill all the unused space in the GGTT (Chris)
- Return the right vswing table (Jose)
- Don't enable DDI IO power on a TypeC port in TBT mode for ICL+ (Imre)
analogix_dp:
- probe fix
virtio:
- oob fix in object create"
* tag 'drm-next-2020-04-10' of git://anongit.freedesktop.org/drm/drm: (34 commits)
drm/ttm: Temporarily disable the huge_fault() callback
drm/bridge: analogix_dp: Split bind() into probe() and real bind()
drm/legacy: Fix type for drm_local_map.offset
drm/amdgpu/display: fix warning when compiling without debugfs
drm/amdgpu: unify fw_write_wait for new gfx9 asics
drm/amd/powerplay: error out on forcing clock setting not supported
drm/amdgpu: fix gfx hang during suspend with video playback (v2)
drm/amd/display: Check for null fclk voltage when parsing clock table
drm/amd/display: Acknowledge wm_optimized_required
drm/amd/display: Make cursor source translation adjustment optional
drm/amd/display: Calculate scaling ratios on every medium/full update
drm/amd/display: Program viewport when source pos changes for DCN20 hw seq
drm/amd/display: Fix incorrect cursor pos on scaled primary plane
drm/amd/display: change default pipe_split policy for DCN1
drm/amd/display: Translate cursor position by source rect
drm/amd/display: Update stream adjust in dc_stream_adjust_vmin_vmax
drm/amd/display: Avoid create MST prop after registration
drm/amdgpu/psp: dont warn on missing optional TA's
drm/amdgpu: update RAS related dmesg print
drm/amdgpu: resolve mGPU RAS query instability
...
This patch process phy compliance request by programming requested
vswing, pre-emphasis and test pattern.
v1: Initial patch.
v2: Fixes added during testing with test-scope. (Khaled/Clint/Manasi)
- pipe used as argument during registers programming instead of port.
- TRANS_CONF must be disable/enable as well during ddi disable/enable.
- harcoded PLTPAT 80 bit custom pattern as the DPR-100 does not set it
in the sink’s DPCDs
- TRANS_DDI_FUNC_CTL DDI_Select (Bits 27:30) need to reset/set during
disable/enable.
v3: used macros instead of numbers and some cosmetic changes. [Manasi]
Cc: Clinton Taylor <Clinton.A.Taylor@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200316103759.12867-8-animesh.manna@intel.com
These debugfs entry will help testapp to understand the test request
during dp phy compliance mode.
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200316103759.12867-6-animesh.manna@intel.com
During DP phy compliance auto test mode, sink will request
combination of different test pattern with differnt level of
vswing, pre-emphasis. Function added to prepare for it.
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200316103759.12867-5-animesh.manna@intel.com
vswing/pre-emphasis adjustment calculation is needed in processing
of auto phy compliance request other than link training, so have
made non-static function.
No functional change.
v1: initial patch.
v2:
- used "intel_dp" prefix in function name. (Jani)
- used array notation instead pointer for link_status. (Ville)
v3: Scrapped the initial patch, modified commit description accordingly.
- made non-static function and used intel_dp prefix. (Jani, Manasi)
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200316103759.12867-4-animesh.manna@intel.com
Convert all the DRM_* logging macros to the struct drm_device based
macros to provide device specific logging.
No functional changes.
Cc: Wambui Karuga <wambui.karugax@gmail.com>
Reviewed-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200402114819.17232-8-jani.nikula@intel.com
Convert all the DRM_* logging macros to the struct drm_device based
macros to provide device specific logging.
No functional changes.
Cc: Wambui Karuga <wambui.karugax@gmail.com>
Reviewed-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200402114819.17232-7-jani.nikula@intel.com
Convert all the DRM_* logging macros to the struct drm_device based
macros to provide device specific logging.
No functional changes.
Cc: Wambui Karuga <wambui.karugax@gmail.com>
Reviewed-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200402114819.17232-5-jani.nikula@intel.com
Drive-by fix I noticed the other day - drm_dp_mst_has_audio() only ever
made sense back when we still had to validate ports before accessing
them in order to (attempt to) avoid NULL dereferences. Since we have
proper reference counting that guarantees we always can safely access
the MST port, there's no use in keeping this function around as all it
does is validate the port pointer before checking the audio status.
Note - drm_dp_mst_port->has_audio is technically protected by
drm_device->mode_config.connection_mutex, since it's only ever updated
from drm_dp_mst_get_edid(). Additionally, we change the declaration for
port in struct intel_connector to be properly typed, so we can directly
access it.
Changes since v1:
* Change type of intel_connector->port in a separate patch - Sean Paul
Cc: "Lee, Shawn C" <shawn.c.lee@intel.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406200646.1263435-2-lyude@redhat.com
The only reason for having this cast as void * before was because we
originally needed to use drm_dp_mst_get_port_validated() and friends in
order to (attempt to) safely access MST ports. However, we've since
improved how reference counting works with ports and mstbs such that we
can now rely on drm_dp_mst_port structs remaining in memory for as long
as the driver needs. This means we don't really need to cast this as
void* anymore, and can just access the struct directly.
We'll also need this for the next commit, so that we can remove
drm_dp_mst_port_has_audio().
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406200646.1263435-1-lyude@redhat.com
DDI ports have its encoders initialized with INTEL_OUTPUT_DDI type and
later eDP ports that have the type changed to INTEL_OUTPUT_EDP.
But for all other DDI ports it can drive HDMI or DP depending on what
user connects to the ports.
ehl_get_combo_buf_trans() and tgl_get_combo_buf_trans() was checking
for INTEL_OUTPUT_DP that was never true, causing wrong vswing tables
being used.
So here replacing the INTEL_OUTPUT_DP checks by the valid output types
that this functions receives as parameters. HDMI cases will be
correctly handled as it do not use encoder->type, instead it calls the
functions with INTEL_OUTPUT_HDMI as type parameter and HDMI don't have
retraining.
v2:
changed INTEL_OUTPUT_DDI to INTEL_OUTPUT_EDP and INTEL_OUTPUT_HDMI
Fixes: bd3cf6f7ce ("drm/i915/dp/tgl+: Update combo phy vswing tables")
Cc: Clinton A Taylor <clinton.a.taylor@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200330210044.130510-1-jose.souza@intel.com
(cherry picked from commit 70988115ac)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The DDI IO power well must not be enabled for a TypeC port in TBT mode,
ensure this during driver loading/system resume.
This gets rid of error messages like
[drm] *ERROR* power well DDI E TC2 IO state mismatch (refcount 1/enabled 0)
and avoids leaking the power ref when disabling the output.
Cc: <stable@vger.kernel.org> # v5.4+
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200330152244.11316-1-imre.deak@intel.com
(cherry picked from commit f77a2db27f)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
On TypeC ports if a sink deasserts/reasserts its HPD signal, generating
a hotplug interrupt without the sink getting unplugged/replugged from
the connector, there can be an up to 3 seconds delay until the AUX
channel gets functional. To avoid detection failures this delay causes
retry the detection for 5 seconds.
I noticed this on ICL/TGL RVPs and a DELL XPS 13 7390 ICL laptop.
References: https://gitlab.freedesktop.org/drm/intel/issues/1067
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200330095425.29113-2-imre.deak@intel.com
On TypeC connectors we need to retry the detection after hotplug events
for a longer time, so add a retry counter to support this. The next
patch will add detection retries on TypeC ports needing this.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200330095425.29113-1-imre.deak@intel.com
Move the final DP_TP_CTL frobbing of port sync to the master
encoder's enable hook. Now neatly out of sight from the high level
modeset code.
And thus we've eliminated all the special casing of port sync
in the high level modeset code.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200313164831.5980-14-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
We're going to want access to the atomic state for iterating
the slave crtcs when enabling the port sync master crtc. Pass
the atomic state all the way down.
The alternative would be yet another encoder hook which we'll
have to call after all the normal modeset stuff is done. Not
really a fan of yet another hook just for this.
Note that during readout state sanitation we are now going
to pass NULL as the atomic state since we don't have one.
We need to change that and then we can also s/crtc_state/crtc/
and s/conn_state/conn/ for the encoder hooks as well.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200313164831.5980-13-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Currently only port sync pipes do the sequence such that
we first do the modeset part for every pipe and then do
the plane/etc. updates. Let's follow that apporach for
all pipes in skl+ so that we can properly integrate the
port sync into the normal modeset flow.
v2: Remove now stale TODO of port sync slave entries[]
s/oldnew/new/
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200313164831.5980-12-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Don't assume there is just one port sync slave. We might have several.
v2: Fix unitialized new_crtc_state usage (José)
Fix clearing of modeset_pipes for slaves
s/oldnew/new/
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200313164831.5980-11-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Transcoder port sync was introduced to the hardware in BDW. We
can trivially enable it for SKL+ since the same codepaths are
already used for ICL+ port sync. The only difference is the actual
location of the bits we need to poke.
We leave BDW out (at least for now) since it uses different modeset
paths that haven't been adapted for port sync, and IIRC using the
feature would involve some extra workarounds we've not implemented.
Pre-BDW hardware does not support port sync so we'd have to tweak
the modeset sequence to start the pipes as close together as possible
and hope for the best. So far no one has seriously tried to implement
that.
Closes: https://gitlab.freedesktop.org/drm/intel/issues/27
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200313164831.5980-9-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
We have a bunch of code that would like to know which
CPU transcoders are actually present in the hardware. Rather than
use various ad-hoc methods let's just include a full bitmask in
the device info, alongside pipe_mask.
v2: Rebase
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200318170235.15176-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
-----BEGIN PGP SIGNATURE-----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=I0vz
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2020-04-01' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"This is the main drm pull request for 5.7-rc1.
Highlights:
- i915 enables Tigerlake by default
- i915 and amdgpu have initial OLED backlight support
[ Jani Nikula pipes up and points out that we've had a bunch of
"initial support" code for a long time already, but only now
Lyude made it actually work on real world machines ]
- vmwgfx add support to enable OpenGL 4 userspace
- zero length arrays are mostly removed.
Detailed summary:
new driver:
- tidss: TI Keystone platform display subsystem
core:
- new drm device warn macros
- mode config valid for memory constrained devices
- bridge bus format negotation
- consolidated fake vblank event handling
- dma_alloc related cleanups
- drop get_crtc callback
- dp: DP1.4 EDID corruption test
- EDID CEA detailed timings improvements
- relicense some code to dual GPL2/MIT
- convert core vblank support to per-crtc support
- rework drm_global_mutex
- bridge rework to allow omap_dss custom driver removeal
- remove drm_fb_helper connector interrfaces
- zero-length array removal
scheduler:
- support for modifying the sched list
- revert job distribution optimization
- helper to pick least loaded scheduler
- race condition fix
mst:
- various fixes
- remove register_connector callback
i915:
- uapi to allows userspace specific CS ring buffer sizes
- Tigerlake enablement patches + Tigerlake enabled by default
- new sysfs entries for engine properties
- display/logging refactors
- eDP/DP fixes for DPCD
- Gen7 back to aliasing-ppgtt
- Gen8+ irq refactor
- Avoid globals
- GEM locking fixes and simplifications
- Ice Lake and Elkhart Lake fixes and workarounds
- Baytrail/Haswell instability fix
- GVT - VFIO edid better support
amdgpu:
- Rework VM update handling in preparation for HMM support
- drm load/unload removal fixups
- USB-C PD firmware updates
- HDCP srm support
- Navi/renoir PM watermark fixes
- OLED panel support
- Optimize debugging vram access
- Use BACO for runtime pm
- DC clock programming optimizations and fixes
- PSP fw loading sequence updates
- Drop DRIVER_USE_AGP
- Remove legacy drm load and unload callbacks
- ACP Kconfig fix
- Lots of fixes across the driver
amdkfd:
- runtime pm support
- more gfx config details in amdgpu
radeon:
- drop DRIVER_USE_AGP
vmwgfx:
- Disable DMA when SEV encryption in use
- Shader Model 5 support - needed for GL4 support
msm:
- DPU resource manager refactor
- dpu using atomic global state
mediatek:
- MT8183 DPI support
etnaviv:
- out-of-bounds read fix
- expose feature flags for GC400 STM32MP1 SoC
- runtime suspend entry fix
- dma32 zone fix
hisilicon:
- mode selection fixes
meson:
- YUV420 support
lima:
- add support for heap buffers
tinydrm:
- removal of owner field
- explicit DT dependency removal
- YAML schema conversion
tegra:
- misc cleanups
tidss:
- new driver
virtio:
- better batching of notifications to host
- memory handling reworked
- shmem + gpu context fixes
hibmc:
- add gamma_set support
- improve DPMS support
pl111:
- Integrator IM-PD1 support
sun4i:
- LVDS support for A20 + A33
- DSI panel handling improvements"
* tag 'drm-next-2020-04-01' of git://anongit.freedesktop.org/drm/drm: (1537 commits)
drm/i915/display: Fix mode private_flags comparison at atomic_check
drm/i915/gt: Stage the transfer of the virtual breadcrumb
drm/i915/gt: Select the deepest available parking mode for rc6
drm/i915: Avoid live-lock with i915_vma_parked()
drm/i915/gt: Treat idling as a RPS downclock event
drm/i915/gt: Cancel a hung context if already closed
drm/i915: Use explicit flag to mark unreachable intel_context
drm/amdgpu: don't try to reserve training bo for sriov (v2)
drm/amdgpu/smu11: add support for SMU AC/DC interrupts
drm/amdgpu/swSMU: handle manual AC/DC notifications
drm/amdgpu/swSMU: handle DC controlled by GPIO for navi1x
drm/amdgpu/swSMU: set AC/DC mode based on the current system state (v2)
drm/amdgpu/swSMU: correct the bootup power source for Navi1X (v2)
drm/amdgpu/swSMU: use the smu11 power source helper for navi1x
drm/amdgpu/smu11: add a helper to set the power source
drm/amd/swSMU: add callback to set AC/DC power source (v2)
drm/scheduler: fix rare NULL ptr race
drm/amdgpu: fix the coverage issue to clear ArcVPGRs
drm/amd/display: Fix pageflip event race condition for DCN.
drm/[radeon|amdgpu]: Remove HAINAN board from max_sclk override check
...
Specification was updated with vswing tables for different
configurations.
Also reordering icl_mg_phy_ddi_buf_trans struct to match table order.
BSpec: 21735
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Clinton Taylor <clinton.a.taylor@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200330210044.130510-3-jose.souza@intel.com
DDI ports have its encoders initialized with INTEL_OUTPUT_DDI type and
later eDP ports that have the type changed to INTEL_OUTPUT_EDP.
But for all other DDI ports it can drive HDMI or DP depending on what
user connects to the ports.
ehl_get_combo_buf_trans() and tgl_get_combo_buf_trans() was checking
for INTEL_OUTPUT_DP that was never true, causing wrong vswing tables
being used.
So here replacing the INTEL_OUTPUT_DP checks by the valid output types
that this functions receives as parameters. HDMI cases will be
correctly handled as it do not use encoder->type, instead it calls the
functions with INTEL_OUTPUT_HDMI as type parameter and HDMI don't have
retraining.
v2:
changed INTEL_OUTPUT_DDI to INTEL_OUTPUT_EDP and INTEL_OUTPUT_HDMI
Fixes: bd3cf6f7ce ("drm/i915/dp/tgl+: Update combo phy vswing tables")
Cc: Clinton A Taylor <clinton.a.taylor@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200330210044.130510-1-jose.souza@intel.com
The DDI IO power well must not be enabled for a TypeC port in TBT mode,
ensure this during driver loading/system resume.
This gets rid of error messages like
[drm] *ERROR* power well DDI E TC2 IO state mismatch (refcount 1/enabled 0)
and avoids leaking the power ref when disabling the output.
Cc: <stable@vger.kernel.org> # v5.4+
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200330152244.11316-1-imre.deak@intel.com
Use the recently introduced encoder .compute_config_late() hook to
do the MST master transcoder assignment. Avoids having to do it
in a funny way before we know the CPU transcoder of each pipe.
And now we can also properly use hw.active instead of uapi.active
since it too has been calculated earlier for everyone.
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200313164831.5980-2-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Not sure why this thing is trying to avoid declaring the proper
type for these pointers. But since these are used only once let's
just get rid of the local variable entirely.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310202752.28454-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Commit 632f3ab95f ("drm/i915/audio: add codec wakeup override
enabled/disable callback"), added logic to toggle Codec Wake on gen9.
This is used by audio driver when it resets the HDA controller.
It seems explicit toggling of the wakeline can help to fix problems
with probe failing on some gen12 platforms. And based on specs, there
is no reason why this programming sequence should not be applied to all
gen9+ platforms. No side-effects are seen on gen10/11. So apply
the wake-logic to all gen9+ platforms.
Link: https://github.com/thesofproject/linux/issues/1847
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200324153212.6303-1-kai.vehmanen@linux.intel.com
This patch fixes the private_flags of mode to be checked and
compared against uapi.mode and not from hw.mode. This helps
properly trigger modeset at boot if desired by driver.
It helps resolve audio_codec initialization issues if display
is connected at boot. Initial discussion on this issue has happened
on below thread:
https://patchwork.freedesktop.org/series/74828/
v2: No functional change. Fixed the Closes tag and added
Maarten's RB.
v3: Added Fixes tag.
Cc: Ville Syrjä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: Souza, Jose <jose.souza@intel.com>
Fixes: 58d124ea27 ("drm/i915: Complete crtc hw/uapi split, v6.")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1363
Suggested-by: Ville Syrjä <ville.syrjala@linux.intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: SweeAun Khor <swee.aun.khor@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200326125111.11081-1-uma.shankar@intel.com
(cherry picked from commit d5e5670592)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This patch fixes the private_flags of mode to be checked and
compared against uapi.mode and not from hw.mode. This helps
properly trigger modeset at boot if desired by driver.
It helps resolve audio_codec initialization issues if display
is connected at boot. Initial discussion on this issue has happened
on below thread:
https://patchwork.freedesktop.org/series/74828/
v2: No functional change. Fixed the Closes tag and added
Maarten's RB.
v3: Added Fixes tag.
Cc: Ville Syrjä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: Souza, Jose <jose.souza@intel.com>
Fixes: 58d124ea27 ("drm/i915: Complete crtc hw/uapi split, v6.")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1363
Suggested-by: Ville Syrjä <ville.syrjala@linux.intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: SweeAun Khor <swee.aun.khor@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200326125111.11081-1-uma.shankar@intel.com
Avoid using the uninitialised len along the impossible error path to
shut the compiler up:
drivers/gpu/drm/i915/display/intel_dp.c:4928 intel_write_dp_sdp() error: uninitialized symbol 'len'.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200325140754.12636-1-chris@chris-wilson.co.uk
We've migrated all the heavy users over to the intel_gt, and can finally
drop the last few users and with that the mirror in dev_priv->engine[].
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200325234803.6175-1-chris@chris-wilson.co.uk
dGFX has local memory so it does not have aperture or support
CPU fences but even for iGFX it have a small number of fences.
As replacement for fences to track frontbuffer modifications by CPU
we have a software tracking that is already in used by FBC and PSR.
PSR don't support fences so it shows that this tracking is reliable.
So lets make fences a nice-to-have to activate FBC for GEN9+, this
will allow us to enable FBC for dGFXs and iGFXs even when there is no
available fence.
We do not set fences to rotated planes but FBC only have restrictions
against 16bpp, so adding it here.
Also adding a new check for the tiling format, fences are only set
to X and Y tiled planes but again FBC don't have any restrictions
against tiling so adding linear as supported as well, other formats
should be added after tested but IGT only supports drawing in thse
3 formats.
intel_fbc_hw_tracking_covers_screen() maybe can also have the same
treatment as fences but BSpec is not clear if the size limitation is
for hardware tracking or general use of FBC and I don't have a 5K
display to test it, so keeping as is for safety.
v2:
- Added tiling and pixel format rotation checks
- Changed the GEN version not requiring fences to 11 from 9, DDX
needs some changes but it don't have support for GEN11+
v3:
- Changed back to GEN9+
- Moved GEN test to inside of tiling_is_valid()
v4:
- moved rotation check to its own functions
v5:
- renamed rotations_is_valid to rotation_is_valid
- moved pre-g4x rotation check to rotation_is_valid()
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200319211535.114625-1-jose.souza@intel.com
On dsi cmd mode we do not receive vblanks instead
we would get TE and these flags indicate TE is expected on
which port.
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200312053841.2794-6-vandita.kulkarni@intel.com
If the GOP has programmed periodic command mode,
we need to disable that which would need a
deconfigure and configure sequence.
v2: Fix sparse error, pass only intel_dsi (Jani)
v3: Use intel_de_read
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200312053841.2794-5-vandita.kulkarni@intel.com
Adding TE flags and periodic command mode flags
as part of private flags to indicate what TE interrupts
we would be getting instead of vblanks in case of mipi dsi
command mode.
v2: Add TE flag description (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200312053841.2794-4-vandita.kulkarni@intel.com
Transcoder timing calculation differ for command mode.
v2: Use is_vid_mode, and use same I915_WRITE (Jani)
v3: Adjust the calculations to reflect dsc compression ratio
v4: Rearrange the vertical and horizontal timing calc, optimize
local variables usage. (Jani)
v5: Fix the values used for calculation, use afe_clk for
byte clock calculation, use intel_de_write/read (Jani)
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200312053841.2794-3-vandita.kulkarni@intel.com
Configure the transcoder to operate in TE GATE command mode
and take TE events from GPIO.
Also disable the periodic command mode, that GOP would have
programmed.
v2: Disable util pin (Jani)
v3: Use intel_de_write (Jani)
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200312053841.2794-2-vandita.kulkarni@intel.com
Few edp panels like Sharp is triggering short and long
hpd pulse after panel is getting powered off.
Currently driver is already ignoring long pulse for eDP
panel but in order to process the short pulse, it turns on
the VDD which requires panel power_cycle_delay + panel_power_on_delay
these delay on Sharp panel introduced the responsiveness overhead
of 800ms in the modeset sequence and as well is in suspend
sequence.
Ignoring any short pulse if panel is powered off.
FIXME: It requires to wait for panel_power_off delay in order
to check the panel power status due to pps_lock because panel triggers
short pulse immediately after writing PP_OFF to PP_CTRL register and
wait_panel_off waits for panel_power_off delay with pps_lock held.
This still creates responsiveness overhead of panel_power_off delay.
v2:
- checking vdd along with panel power to ignore the hpd. [Jani,Ville]
v3:
- safer side check to ignore the long hpd when eDP have power,
adding type of hpd to debug log. [Jani]
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200318081837.23983-1-anshuman.gupta@intel.com
We only consider crtc_state->enable when initially calculating plane
visibility. Later on we try to override the plane's state to invisible
if the crtc is in DPMS off state (crtc_state->active==false).
Unfortunately the code doing that only updates the plane_state.visible
flag and the crtc_state.active_planes bimask, but forgets to update
some of the other plane bitmasks stored in the crtc_state. Namely
crtc_state.nv12_planes is left set up based on the original visibility
check which makes icl_check_nv12_planes() pick a slave plane for the
flagged plane in the bitmask. Later on we hit the watermark code
which sees a plane with a slave assigned and it then makes the
logical assumption that the master plane must itself be visible.
Since the master's plane_state.visible flag was already cleared
we get a WARN.
Fix the problem by clearing all the plane bitmasks for DPMS off.
This is more or less the wrong approach and instead we should
calculate all the plane related state purely based crtc_state->enable
(to guarantee that the subsequent DPMS on can't fail). However in
the past we definitely had some roadblocks to making that happen.
Not sure how many are left these days, but let's stick to the current
approach since it's a much simpler fix to the immediate problem
(the WARN).
v2: Keep the visible=false, it's important (Rodrigo)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200318174515.31637-1-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
It adds routines that write DP VSC SDP and DP HDR Metadata Infoframe SDP.
In order to pack DP VSC SDP, it adds intel_dp_vsc_sdp_pack() function.
It follows DP 1.4a spec. [Table 2-116: VSC SDP Header Bytes] and
[Table 2-117: VSC SDP Payload for DB16 through DB18]
In order to pack DP HDR Metadata Infoframe SDP, it adds
intel_dp_hdr_metadata_infoframe_sdp_pack() function.
And it follows DP 1.4a spec.
([Table 2-125: INFOFRAME SDP v1.2 Header Bytes] and
[Table 2-126: INFOFRAME SDP v1.2 Payload Data Bytes - DB0 through DB31])
and CTA-861-G spec. [Table-42 Dynamic Range and Mastering InfoFrame].
A mechanism and a naming rule of intel_dp_set_infoframes() function
references intel_encoder->set_infoframes() of intel_hdmi.c .
VSC SDP is used for PSR and Pixel Encoding and Colorimetry Formats cases.
Because PSR routine has its own routine of writing a VSC SDP, when the PSR
is enabled, intel_dp_set_infoframes() does not write a VSC SDP.
v3:
- Explicitly disable unused DIPs (AVI, GCP, VS, SPD, DRM. They will be
used for HDMI), when intel_dp_set_infoframes() function will be called.
- Replace a structure name to drm_dp_vsc_sdp from intel_dp_vsc_sdp.
v4: Use struct drm_device logging macros
v5:
- use intel_de_*() functions for register access
- Addressed review comments from Uma
Polish commit message and comments
Add 6bpc to packing of VSC SDP
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200211074657.231405-5-gwan-gyeong.mun@intel.com
It stores computed dp hdr metadata infoframe sdp to infoframes.drm of
crtc state. It referenced intel_hdmi_compute_drm_infoframe().
While computing, we'll also fill out the infoframes.enable bitmask
appropriately.
v2: Wrap a long line.
v4: Use struct drm_device logging macros
v5: Fix typo [Uma]
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200211074657.231405-4-gwan-gyeong.mun@intel.com
In order to support state readout for DP VSC SDP, we need to have a
structure which holds DP VSC SDP payload data such as
"union hdmi_infoframe drm" which is used for DRM infoframe.
It adds a struct drm_dp_vsc_sdp vsc to intel_crtc_state.infoframes.
And it stores computed dp vsc sdp to infoframes.vsc of crtc state.
While computing we'll also fill out the inforames.enable bitmask
appropriately.
The compute routine follows DP 1.4 spec [Table 2-117: VSC SDP Payload for
DB16 through DB18].
v3: Replace a structure name to drm_dp_vsc_sdp from intel_dp_vsc_sdp
v5:
- Rebased
- Add warning where a bpc is 6 and a pixel format is RGB.
v7: Fix the wrong check of combination bpc 6 and RGB pixelformat
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200211074657.231405-3-gwan-gyeong.mun@intel.com
On i915 we have a new UAPI to allow userspace to specify CS ring buffer size on
construction (I915_CONTEXT_PARAM_RINGSIZE) and also new sysfs entries exposing
various engine properties
GVT Changes:
VFIO edid getting expanded to all platforms and a big cleanup around attr
group, unused vblank complete, kvmgt, Intel engine and dev_priv usages.
i915 Changes:
- new UAPI to allow userspace to specify CS ring buffer size on construction
(I915_CONTEXT_PARAM_RINGSIZE) - (Chris)
- New sysfs entries exposing various engine properties (Chris)
- Tiger Lake is out of require_force_probe protection (Jose)
- Changes in many places around active requests, reset and heartbeat (Chris)
- Stop assigning drm-dev_private pointer (Jani)
- Many code refactor in many places, including intel_modeset_init,
increasing use of intel_uncore_*, vgpu, and gvt stuff (Jani)
- Fixes around display pipe iterators (Anshuman)
- Tigerlake enabling work (Matt Ropper, Matt Atwood, Ville, Lucas, Daniele,
Jose, Anusha, Vivek, Swathi, Caz. Kai)
- Code clean-up like reducing use of drm/i915_drv.h, removing unused
registers, removing garbage warns, and some other code polishing (Jani, Lucas,
Ville)
- Selftests fixes, improvements and additions (Chris, Dan, Aditya, Matt Auld)
- Fix plane possible_crtcs bit mask (Anshuman)
- Fixes and cleanup on GLK pre production identification and w/a (Ville)
- Fix display orientation on few cases (Hans, Ville)
- dbuf clean-up and improvements for slice arrays handling (Ville)
- Improvement around min cdclk calculation (Stanislav)
- Fixes and refactor around display PLLs (Imre)
- Other execlists and perf fixes (Chris)
- Documentation fixes (Jani, Chris)
- Fix build issue (Anshuman)
- Many more fixes around the locking mechanisms (Chris)
- Other fixes and debugability info around preemption (Chris, Tvrtko)
- Add mechanism to submit a context WA on ring submission (Mika)
- Clear all Eu/L3 resitual context (Prathap)
- More changes around local memory (Abdiel, Matt, Chris)
- Fix RPS (Chris)
- DP MST fix (Lyude)
- Display FBC fixes (Jose, RK)
- debugfs cleanup (Tvrtko)
- More convertion towards drm_debive based loggin (Wambui, Ram)
- Avoid potential buffer overflow (Takashi)
- Ice Lake and Elkhart Lake workarounds (Matt Roper)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAl5sIZ0ACgkQ+mJfZA7r
E8o1LQf+L/Vpm46QQGEyzHINf/gTQvFvumuNAX352vEHaKUgLtTuI7xfpd0c83G1
5VI+L0Q/ARvakkgfZuHYInlxc9azkcPF1wXb3bLqkoiJ15ydwx5GWjVpZ8uFT+fG
xzaHBqhqUcvw/kXI1Cy5kIDAlFO9rKLsoLS2qQF9BsYHyxa52ok9/hW+lM7C+vfR
aYvEr7aAK0o06mqgwc3DHXGuzaS1S9kxtvj9ZkHNsD9iwD4rrEIvW3BPuDqEVkGq
TkKfThhzJp2FDjXkgCQbLm2BQmxBS0aihwNsQ/lDUUAxcFiuRYwMSoT63vPD1OYI
lgG0BuJkwK7csJIMrnOs/ZAMeKyTQA==
=vrB8
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2020-03-13' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
UAPI Changes:
On i915 we have a new UAPI to allow userspace to specify CS ring buffer size on
construction (I915_CONTEXT_PARAM_RINGSIZE) and also new sysfs entries exposing
various engine properties
GVT Changes:
VFIO edid getting expanded to all platforms and a big cleanup around attr
group, unused vblank complete, kvmgt, Intel engine and dev_priv usages.
i915 Changes:
- new UAPI to allow userspace to specify CS ring buffer size on construction
(I915_CONTEXT_PARAM_RINGSIZE) - (Chris)
- New sysfs entries exposing various engine properties (Chris)
- Tiger Lake is out of require_force_probe protection (Jose)
- Changes in many places around active requests, reset and heartbeat (Chris)
- Stop assigning drm-dev_private pointer (Jani)
- Many code refactor in many places, including intel_modeset_init,
increasing use of intel_uncore_*, vgpu, and gvt stuff (Jani)
- Fixes around display pipe iterators (Anshuman)
- Tigerlake enabling work (Matt Ropper, Matt Atwood, Ville, Lucas, Daniele,
Jose, Anusha, Vivek, Swathi, Caz. Kai)
- Code clean-up like reducing use of drm/i915_drv.h, removing unused
registers, removing garbage warns, and some other code polishing (Jani, Lucas,
Ville)
- Selftests fixes, improvements and additions (Chris, Dan, Aditya, Matt Auld)
- Fix plane possible_crtcs bit mask (Anshuman)
- Fixes and cleanup on GLK pre production identification and w/a (Ville)
- Fix display orientation on few cases (Hans, Ville)
- dbuf clean-up and improvements for slice arrays handling (Ville)
- Improvement around min cdclk calculation (Stanislav)
- Fixes and refactor around display PLLs (Imre)
- Other execlists and perf fixes (Chris)
- Documentation fixes (Jani, Chris)
- Fix build issue (Anshuman)
- Many more fixes around the locking mechanisms (Chris)
- Other fixes and debugability info around preemption (Chris, Tvrtko)
- Add mechanism to submit a context WA on ring submission (Mika)
- Clear all Eu/L3 resitual context (Prathap)
- More changes around local memory (Abdiel, Matt, Chris)
- Fix RPS (Chris)
- DP MST fix (Lyude)
- Display FBC fixes (Jose, RK)
- debugfs cleanup (Tvrtko)
- More convertion towards drm_debive based loggin (Wambui, Ram)
- Avoid potential buffer overflow (Takashi)
- Ice Lake and Elkhart Lake workarounds (Matt Roper)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200314001535.GA2969344@intel.com
This fixes a problem found on the MacBookPro 2017 Retina panel.
The panel reports 10 bpc color depth in its EDID, and the
firmware chooses link settings at boot which support enough
bandwidth for 10 bpc (324000 kbit/sec = multiplier 0xc),
but the DP_MAX_LINK_RATE dpcd register only reports
2.7 Gbps (multiplier value 0xa) as possible, in direct
contradiction of what the firmware successfully set up.
This restricts the panel to 8 bpc, not providing the full
color depth of the panel.
This patch adds a quirk specific to the MBP 2017 15" Retina
panel to add the additiional 324000 kbps link rate during
edp setup.
Link to previous discussion of a different attempted fix
with Ville and Jani:
https://patchwork.kernel.org/patch/11325935/
v2: Follow Jani's proposal of defining quirk_rates[] instead
of just appending 324000. This for better clarity.
v3: Rebased onto current drm-tip, as of 16-March-2020. Adapt
to new edid_quirks parameter of drm_dp_has_quirk().
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Tested-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200316042340.4783-1-mario.kleiner.de@gmail.com
Converts various instances of the printk based drm logging macros to the
struct drm_device based logging macros in i915/display/intel_hdcp.c.
This also involves extracting the drm_i915_private device from the
intel_connector type for use in the macros.
v2 by Jani:
- rebase
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Wambui Karuga <wambui.karugax@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/47d5e88dedc08ee48938344296ada550dedd5f90.1583766715.git.jani.nikula@intel.com
Convert various instances of printk based drm logging macros to the
struct drm_device based logging macros in i915/display/intel_fbdev.c.
This also involves extracting the drm_i915_private device from various
intel types.
v2 by Jani:
- fix the final one too
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Wambui Karuga <wambui.karugax@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7081a49d20cc46b1b1144c83a4e21294d121d8a7.1583766715.git.jani.nikula@intel.com
Since commit 987d65d013 (drm: debugfs: make
drm_debugfs_create_files() never fail), drm_debugfs_create_files() never
fails and should return void. Therefore, remove its use as the
return value of debugfs_init() functions and have the functions return
void.
v2: convert intel_display_debugfs_register() stub to return void too.
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310133121.27913-15-wambui.karugax@gmail.com
For icl+, have hw read out to create hw blob of gamma
lut values. icl+ platforms supports multi segmented gamma
mode by default, add hw lut creation for this mode.
This will be used to validate gamma programming using dsb
(display state buffer) which is a tgl specific feature.
v2: -readout code for multisegmented gamma has to come
up with some intermediate entries that aren't preserved
in hardware (Jani N)
-linear interpolation (Ville)
-moved common code to check gamma_enable to specific funcs,
since icl doesn't support that
v3: -use u16 instead of __u16 [Jani N]
-used single lut [Jani N]
-improved and more readable for loops [Jani N]
-read values directly to actual locations and then fill gaps [Jani N]
-moved cleaning to patch 1 [Jani N]
-renamed icl_read_lut_multi_seg() to icl_read_lut_multi_segment to
make it similar to icl_load_luts()
-renamed icl_compute_interpolated_gamma_blob() to
icl_compute_interpolated_gamma_lut_values() more sensible, I guess
v4: -removed interpolated func for creating gamma lut values
-removed readouts of fine and coarse segments, failure to read PAL_PREC_DATA
correctly
v5: -added gamma_enable check inside read_luts()
v6: -renamed intel_color_lut_entry_equal() to intel_color_lut_entries_equal() [Ville]
-changed if-else to switch [Ville]
-removed intel_color_lut_entry_multi_equal() [Ville]
v7: -checkpatch warnings
v8: -rebased
v9: -rebased, aligned with Ville's style of gamma cleanup
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200317135736.14305-1-swati2.sharma@intel.com
drm_dp_mst_topology_mgr_cbs.destroy_connector callbacks are identical
amongst every driver and don't do anything other than cleaning up the
connector((drm_connector_unregister()/drm_connector_put())) except for
amdgpu_dm driver where some amdgpu_dm specific code in there.
This connector cleaning up is now being handled in the drm core so
driver destroy_connector callbacks are not needed (except for
amdgpu_dm) hence remove them.
Removal is done with below sementic patch:
@r1@
identifier func, E;
@@
struct drm_dp_mst_topology_cbs E = {
...,
- .destroy_connector = func
};
@delete depends on r1@
identifier r1.func;
@@
- static void func(...){...}
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Suggested-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200307083023.76498-6-pankaj.laxminarayan.bharadiya@intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
drm_dp_mst_port_add_connector() directly calls the
drm_connector_register() now and
drm_dp_mst_topology_mgr_cbs.register_connector callback is not getting
called anymore.
Hence remove all drm_dp_mst_topology_mgr_cbs.register_connector
callbacks.
This is the preparatory step for removing the
drm_dp_mst_topology_mgr_cbs.register_connector callback hook.
The removal is done with below sementic patch:
@r1@
identifier func, E;
@@
struct drm_dp_mst_topology_cbs E = {
...,
- .register_connector = func
};
@delete depends on r1@
identifier r1.func;
@@
- static void func(...){...}
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Suggested-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200307083023.76498-3-pankaj.laxminarayan.bharadiya@intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
Gen12 hardware supports HDMI audio pixel clocks of 296.7/297Mhz
and 593.4/594Mhz. Add the missing rates and add logic to ignore
them if running on older hardware.
Bspec: 49333
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310162338.9387-1-kai.vehmanen@linux.intel.com
Converts various instances of the printk based drm logging macros to the
struct drm_device based logging macros in i915/display/intel_hotplug.c.
In some cases, this involves extracting the drm_i915_private pointer from
the drm_device struct to be used in the logging macros.
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3dfda89ab4a234f299ada77abd14163cef3f8bd4.1583766715.git.jani.nikula@intel.com
Platforms without fences don't have FBC host tracking and those
registers are marked as reserved in those platforms.
v2: checking num_fences to write to FBC fence registers (Ville)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200306185833.53984-2-jose.souza@intel.com
i915 can enable aux device nodes for DP MST by calling
drm_dp_mst_connector_late_register()/
drm_dp_mst_connector_early_unregister(),
so let's hook that up.
Changes since v1:
* Call intel_connector_register/unregister() from
intel_dp_mst_connector_late_register/unregister() so we don't lose
error injection - Ville Syrjälä
Changes since v2:
* Don't forget to clean up if intel_connector_register() fails - Ville
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: "Lee, Shawn C" <shawn.c.lee@intel.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310195122.1590925-1-lyude@redhat.com
gmbus/aux may be clocked by cdclk, thus we should make sure no
transfers are ongoing while the cdclk frequency is being changed.
We do that by simply grabbing all the gmbus/aux mutexes. No one
else should be holding any more than one of those at a time so
the lock ordering here shouldn't matter.
v2: Use mutex_lock_nest_lock() (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200302174442.5803-1-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
The low level read_lut() functions don't need the entire crtc state
as they know exactly what they're reading. Just need to pass in the
crtc to get at the pipe. This now neatly mirrors the load_lut()
direction.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200303173313.28117-10-ville.syrjala@linux.intel.com
Reviewed-by: Swati Sharma <swati2.sharma@intel.com>
PIPEGCMAX is a 11.6 (or 1.16 if you will) value. Ie. it can
represent a value of 1.0 when the maximum we can store in the
software LUT is 0.ffff. Clamp the value so that it gets
saturated to the max the uapi supports.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200303173313.28117-9-ville.syrjala@linux.intel.com
Reviewed-by: Swati Sharma <swati2.sharma@intel.com>
A variable called 'i' having an unsigned type is just looking for
trouble, and using a sized type generally makes no sense either.
Change all of them to just plain old int. And do the same for some
'lut_size' variables which generally provide the loop end codition
for 'i'.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200303173313.28117-7-ville.syrjala@linux.intel.com
Reviewed-by: Swati Sharma <swati2.sharma@intel.com>
Only load the CGM CSC based on the cgm_mode bit like we
do with the gamma/degamma LUTs. And make the function
naming and arguments consistent as well.
TODO: the code to convert the coefficients look totally
bogus. IIRC CHV uses two's complement format but the code
certainly doesn't generate that, so probably negative
coefficients are totally busted.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200303173313.28117-2-ville.syrjala@linux.intel.com
Reviewed-by: Swati Sharma <swati2.sharma@intel.com>
Fix the following kerneldoc warning and while at it also the doc for the
corresponding vfunc hook.
$ make htmldocs 2>&1 > /dev/null | grep i915
./drivers/gpu/drm/i915/display/intel_dpll_mgr.h:285: warning: Function parameter or member 'get_freq' not described in 'intel_shared_dpll_funcs'
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200304150918.25473-1-imre.deak@intel.com
On some platforms such as Elkhart Lake, although we may use DDI D
to drive a connector, we have to use PHY A (Combo Phy PORT A) to
detect the hotplug interrupts as per the spec because there is no
one-to-one mapping between DDIs and PHYs. Therefore, use the
function intel_port_to_phy() which contains the logic for such
mapping(s) to find the correct hpd_pin.
This change should not affect other platforms as there is always
a one-to-one mapping between DDIs and PHYs.
v2:
- Convert the case statements to use PHYs instead of PORTs (Jani)
v3:
- Refactor the function to reduce the number of return statements by
lumping all the case statements together except PHY_F which needs
special handling (Jose)
v4:
- Add a comment describing how the HPD pin value associated with any
port can be retrieved using port or phy enum value. (Jani)
v5:
- Use case ranges instead of individual labels and also normalize the
return statement by adding -PHY_A to the expression (Ville)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200304234240.12062-1-vivek.kasireddy@intel.com
drm_fb_helper_{add,remove}_one_connector() and
drm_fb_helper_single_add_all_connectors() are dummy functions now
and serve no purpose. Hence remove their calls.
This is the preparatory step for removing the
drm_fb_helper_{add,remove}_one_connector() functions from
drm_fb_helper.h
This removal is done using below sementic patch and unused variable
compilation warnings are fixed manually.
@@
@@
- drm_fb_helper_single_add_all_connectors(...);
@@
expression e1;
statement S;
@@
- e1 = drm_fb_helper_single_add_all_connectors(...);
- S
@@
@@
- drm_fb_helper_add_one_connector(...);
@@
@@
- drm_fb_helper_remove_one_connector(...);
Changes since v1:
* Squashed warning fixes into the patch that introduced the
warnings (into 5/7) (Laurent, Emil, Lyude)
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305120434.111091-6-pankaj.laxminarayan.bharadiya@intel.com
drm_fb_helper_{add,remove}_one_connector() are dummy functions now
and serve no purpose. Hence remove their calls.
This is the preparatory step for removing the
drm_fb_helper_{add,remove}_one_connector() functions from
drm_fb_helper.h
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305120434.111091-5-pankaj.laxminarayan.bharadiya@intel.com
The max connector argument for drm_fb_helper_init() isn't used anymore
hence remove it.
All the drm_fb_helper_init() calls are modified with below sementic
patch.
@@
expression E1, E2, E3;
@@
- drm_fb_helper_init(E1,E2, E3)
+ drm_fb_helper_init(E1,E2)
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305120434.111091-2-pankaj.laxminarayan.bharadiya@intel.com
Check the edge case where batch_start_offset sits exactly on the batch
size.
v2: add new range_overflows variant to capture the special case where
the size is permitted to be zero, like with batch_len.
v3: other way around. the common case is the exclusive one which should
just be >=, with that we then just need to convert the three odd ball
cases that don't apply to use the new inclusive _end version.
Testcase: igt/gem_exec_params/invalid-batch-start-offset
Fixes: 0b5372727b ("drm/i915/cmdparser: Use cached vmappings")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200306094735.258285-1-matthew.auld@intel.com
Converting error to debug print if sink fails to configure scrambling or
TMDS bit clock ratio. In this case, we are timing out while disabling
the scrambling and setting the SCDC ratio, as there is no response
to the I2C SCDC write from the sink device. Error isn't due to something
wrong done from driver side.
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200302213807.6488-1-swati2.sharma@intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
The Thundersoft TST178 tablet uses a DSI panel with an external PWM
controller (as all DSI panels do). But unlike other DSI panels a duty-cycle
of 100% turns the backlight off and 0% sets it to maximum brightness.
I've checked the VBT and there is a BDB_LVDS_BACKLIGHT section, but
it does not set the active_low_pwm flag. This tablet re-uses the main
PCI vendor and product ids for the subsystem ids, so I see no other option
then to add a DMI based quirk to fix this.
Note that the PWM backlight code in intel_panel.c currently does not honor
the vbt.active_low_pwm flag, but that does not matter in this case.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200221172927.510027-2-hdegoede@redhat.com
Use intel_panel_compute_brightness() from pwm_setup_backlight() so that
we correctly take i915_modparams.invert_brightness and/or
QUIRK_INVERT_BRIGHTNESS into account when setting + getting the initial
brightness value.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200221172927.510027-1-hdegoede@redhat.com
intel_ddi_clock_get() tests the DPLL ID against DPLL_ID_ICL_TBTPLL (2)
to determine whether to try to descend into a TBT-specific handler.
However this test will also be true when DPLL4 on EHL is used since that
shares the same DPLL ID (2).
Add an extra check to ensure the PHY is actually a Type-C PHY before
descending into the TBT handling. This should ensure EHL still takes
the correct code path and somewhat future-proof the code as well.
v2: Drop the gen+ check since only gen11+ platforms can have Type-C
outputs. (Imre)
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1369
Fixes: 45e4728b87 ("drm/i915: Move DPLL frequency calculation to intel_dpll_mgr.c")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200303195043.959913-1-matthew.d.roper@intel.com
The X1 Extreme is one of the systems that lies about which backlight
interface that it uses in its VBIOS as PWM backlight controls don't work
at all on this machine. It's possible that this panel could be one of
the infamous ones that can switch between PWM mode and DPCD backlight
control mode, but we haven't gotten any more details on this from Lenovo
just yet. For the time being though, making sure the backlight 'just
works' is a bit more important.
So, add a quirk to force DPCD backlight controls on for these systems
based on EDID (since this panel doesn't appear to fill in the device ID).
Hopefully in the future we'll figure out a better way of probing this.
Changes since v2:
* The bugzilla URL is deprecated, bug reporting happens on gitlab now.
Update the messages we print to reflect this
* Also, take the opportunity to move FDO_BUG_URL out of i915_utils.c and
into i915_utils.h so that other places which print things that aren't
traditional errors but are worth filing bugs about, can actually use
it.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200303215320.93491-1-lyude@redhat.com
The whole point of using OUIs is so that we can recognize certain
devices and potentially apply quirks for them. Normally this should work
quite well, but there appears to be quite a number of laptop panels out
there that will fill the OUI but not the device ID. As such, for devices
like this I can't imagine it's a very good idea to try relying on OUIs
for applying quirks. As well, some laptop vendors have confirmed to us
that their panels have this exact issue.
So, let's introduce the ability to apply DP quirks based on EDID
identification. We reuse the same quirk bits for OUI-based quirks, so
that callers can simply check all possible quirks using
drm_dp_has_quirk().
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200211183358.157448-2-lyude@redhat.com
DP shim's config_stream_type considered to be succeeded when
return value of intel_dp_hdcp2_write_msg() equals to size of
message to be written, it makes config_stream_type to return
a zero success value in order to succeed the HDCP auth.
v2:
- config_stream_type() returns 0 on success. [Ram]
CC: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200303073838.25871-1-anshuman.gupta@intel.com
HDCP Repeater initializes seq_num_V to 0 at the beginning of
hdcp Session i.e. after AKE_init received, refer
HDCP 2.2 Spec HDMI PAGE 19, DP PAGE 20.
HDCP 2.2 Comp specs 1B-06 test verifies that whether DUT
considers failure of authentication if the repeater provides a
non-zero value in seq_num_V in the first,
RepeaterAuth_Send_ReceiverID_List message.
Make sure that HDCP repeater initializes seq_num_V to zero at
beginning of session i.e. after AKE_Init, fail the Auth if
there is non zero seq_num_V.
v2:
- Used existing hdcp2_encrypted flag instead of
declaring new flag. [Ram]
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200220123217.23635-2-anshuman.gupta@intel.com
It irks me to use crtc_state_is_legacy_gamma() inside the guts
of the CHV color management code. Let's get rid of it and instead
just consult cgm_mode to figure out if we want to enable the pipe
gamma or the CGM gamma.
Also CHV display engine is based on i965/g4x so we should fall back
to the i965 path when the CGM gamma is not used.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107151725.10507-3-ville.syrjala@linux.intel.com
Reviewed-by: Swati Sharma <swati2.sharma@intel.com>
Add intel_vgpu_register() abstraction, rename i915_detect_vgpu() to
intel_vgpu_detect() to match other function naming, un-inline
intel_vgpu_active(), intel_vgpu_has_full_ppgtt() and
intel_vgpu_has_huge_gtt() to reduce header interdependencies.
The i915_vgpu.[ch] filename and intel_vgpu_ prefix discrepancy remains.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200227144408.24345-1-jani.nikula@intel.com
has_transcoder() was unused because function which was using it,
intel_display_capture_error_state() defined under
CONFIG_DRM_I915_CAPTURE_ERROR.
Moving has_transcoder() to under CONFIG_DRM_I915_CAPTURE_ERROR.
No functional change.
Fixes: d54c1a513c ("drm/i915: Fix broken transcoder err state")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reported-by: kbuild test robot <lkp@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200227175147.11362-1-anshuman.gupta@intel.com
Converts remaining instances of the printk based logging macros in
i915/display/intel_hdcp.c with the struct drm_device based macros
manually.
This is continuation of commit 65833c4638 ("drm/i915/hdcp: conversion
to struct drm_device based logging macros.")
v2:
i915_dev_priv is used instead of drm_device for reusability [JaniN]
v3:
Made it independent from the series.
once instance of dev_priv naming is changed to i915 [Jani N]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200212123007.6659-1-ramalingam.c@intel.com
All platforms using the shared DPLL framework use 3 reference clocks for
their DPLLs: SSC, non-SSC and DSI. For a more unified way across
platforms store the frequency of these ref clocks as part of the DPLL
global state. This also allows us to keep the HW access reading out the
ref clock value separate from the DPLL frequency calculation that
depends on the ref clock.
For now add only the SSC and non-SSC ref clocks, as the pre-ICL DSI code
has its own logic for calculating DPLL parameters instead of the shared
DPLL framework.
v2:
- Apply the ICL combo PHY PLL ref_clock/2 adjustment during the
frequency->PLL param conversion direction as well. (CI shards)
- s/kHZ/kHz/ (Ville)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200228153328.17842-1-imre.deak@intel.com
The types of PLLs used for HDMI/DP on HSW are WRPLL/LCPLL accordingly,
so use these names to align better with the rest of WRPLL/LCPLL function
names elsewhere.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226203455.23032-9-imre.deak@intel.com
For clarity keep the SKL DPLL ref clock in a variable instead of
open-coding it. Store the value in kHZ units as done on other platforms.
This allows us in a later patch to keep track of the DPLL ref clock in a
more unified way across all platforms.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226203455.23032-8-imre.deak@intel.com
Move all the DPLL params->DPLL frequency conversion functions to
intel_dpll_mgr.c where the corresponding inverse conversions are.
The GEN11+ TBT PLL outputs multiple frequencies and for selecting the
one in use we need to check the DDI CLK mux. As part of the DDI clock
logic this selection is kept in intel_ddi.c.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226203455.23032-7-imre.deak@intel.com
For clarity add a new DPLL specific struct to the i915 device struct and
move all DPLL fields into it. Accordingly remove the dpll_ prefixes, as
the new struct already provides the required namespacing.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226203455.23032-4-imre.deak@intel.com
There seems to be a bit of confusing redundancy in a way, how
plane data rate/min cdclk are calculated.
In fact both min cdclk, pixel rate and plane data rate are all
part of the same formula as per BSpec.
However currently we have intel_plane_data_rate, which is used
to calculate plane data rate and which is also used in bandwidth
calculations. However for calculating min_cdclk we have another
piece of code, doing almost same calculation, but a bit differently
and in a different place. However as both are actually part of same
formula, probably would be wise to use plane data rate calculations
as a basis anyway, thus avoiding code duplication and possible bugs
related to this.
Another thing is that I've noticed that during min_cdclk calculations
we account for plane scaling, while for plane data rate, we don't.
crtc->pixel_rate seems to account only for pipe ratio, however it is
clearly stated in BSpec that plane data rate also need to account
plane ratio as well.
So what this commit does is:
- Adds a plane ratio calculation to intel_plane_data_rate
- Removes redundant calculations from skl_plane_min_cdclk which is
used for gen9+ and now uses intel_plane_data_rate as a basis from
there as well.
v2: - Don't use 64 division if not needed(Ville Syrjälä)
- Now use intel_plane_pixel_rate as a basis for calculations both
at intel_plane_data_rate and skl_plane_min_cdclk(Ville Syrjälä)
v3: - Again fix the division macro
- Fix plane_pixel_rate to pixel_rate at intel_plane_pixel_rate
callsites
v4: - Renamed skl_plane_ratio function back(Ville Syrjälä)
v5: - Don't precalculate plane pixel rate for invisible plane,
check for visibility first, as in invisible case it will
have dst_w and dst_h equal to zero, causing divide error.
v6: - Removed useless warn in intel_plane_pixel_rate(Ville Syrjälä)
- Fixed alignment in intel_plane_data_rate(Ville Syrjälä)
- Changed pixel_rate type to be unsigned int in
skl_plane_min_cdclk(Ville Syrjälä)
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200227150935.2107-1-stanislav.lisovskiy@intel.com
Supposedly both src coordinates have to even when doing 90/270
degree rotation with RGB565. This is definitely true for the
X coordinate (we just get a black screen when it is odd). My
experiments didn't show any misbehaviour with an odd
Y coordinate, but let's trust the spec and reject that one
as well.
v2: Ignore ccs hsub/vsub
v3: Clarify the CCS special (Maarten)
Deal with tgl+ CCS modifiers where we
do need to look at hsub/vsub
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #v2
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200228160523.1064-1-ville.syrjala@linux.intel.com
Some devices with a builtin panel have the panel mounted upside down,
this is indicated by the rotate_180 bit in the BDB_GENERAL_FEATURES VBT
block.
We store this info in dev_priv->vbt.orientation, use this to set the
connector's orientation property so that fbcon and userspace will show
the image the right way up on devices with an upside-down mounted panel.
This fixes the image being upside-down on a Teclast X89 tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200228114110.187792-3-hdegoede@redhat.com
Commit 82daca2975 ("drm/i915: Add "panel orientation" property to the
panel connector, v6.") uses hardware state readback to determine if the
GOP is rotating the image by 180 degrees to compensate for upside-down
mounted panels.
When I wrote that commit I tried to find the VBT bits the GOP used to
decide to rotate the image, but I could not find them. Back then I only
looked at the rotation bits in struct mipi_config and these read 0 on
the 1 BYT device I have with an upside-down mounted panel
(a GP-electronic T701 tablet). While working on a similar problem on a
BYT device with an eDP panel I noticed that the new
intel_dsi_get_panel_orientation() helper which gets used on newer
SoCs (Apollo-Lake, etc.) checks the rotate_180 bit in the
BDB_GENERAL_FEATURES VBT block.
I've checked and this bit indeed is set on the GP-electronic T701 tablet,
so using the generic intel_dsi_get_panel_orientation() helper there does
the right thing without needing any extra readback of hw state.
This commit removes the special handling of the panel orientation for
DSI panels on BYT/CHT devices, bringing the handling in line with the
handling of DSI panels on other devices.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200228114110.187792-2-hdegoede@redhat.com
Having an array pipe_crc[I915_MAX_PIPES] in struct drm_i915_private
should be an obvious clue this should be located in struct intel_crtc
instead. Make it so.
As a side-effect, fix some errors in indexing pipe_crc with both pipe
and crtc index. And, of course, reduce the size of i915_drv.h.
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200227161253.15741-1-jani.nikula@intel.com
We need to explicitly set the TLB Request Timer initial value in the
BW_BUDDY registers to 0x8 rather than relying on the hardware default.
v2: Apply missing REG_FIELD_PREP to ensure 0x8 is placed in the correct
bits during the rmw. (Jose)
Bspec: 52890
Bspec: 50044
Fixes: 3fa01d642f ("drm/i915/tgl: Program BW_BUDDY registers during display init")
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200219215655.2923650-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit 87e04f7592)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200228004320.127142-2-matthew.d.roper@intel.com
Commit 60c6a14b48 ("drm/i915/display: Force the state compute phase
once to enable PSR") was forcing the state compute too earlier
causing errors because not everything was initialized, so here
moving to the end of i915_driver_modeset_probe() when the display is
all initialized.
Also fixing the place where it disarm the force probe as during the
atomic check phase errors could happen like the ones due locking and
it would cause PSR to never be enabled if that happens.
Leaving the disarm to the atomic commit phase, intel_psr_enable() or
intel_psr_update() will be called even if the current state do not
allow PSR to be enabled.
v2: Check if intel_dp is null in intel_psr_force_mode_changed_set()
v3: Check intel_dp before get dev_priv
v4:
- renamed intel_psr_force_mode_changed_set() to
intel_psr_set_force_mode_changed()
- removed the set parameter from intel_psr_set_force_mode_changed()
- not calling intel_psr_set_force_mode_changed() from
intel_psr_enable/update(), directly setting it after the same checks
that intel_psr_set_force_mode_changed() does
- moved intel_psr_set_force_mode_changed() arm call to
i915_driver_modeset_probe() as it is a better for a PSR call, all the
functions calls happening between the old and the new function call
will cause issue
[backported to v5.6-rc3]
Fixes: 60c6a14b48 ("drm/i915/display: Force the state compute phase once to enable PSR")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1151
Tested-by: Ross Zwisler <zwisler@google.com>
Reported-by: Ross Zwisler <zwisler@google.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200221212635.11614-1-jose.souza@intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20200227205540.126135-1-jose.souza@intel.com
(cherry picked from commit df1a5bfc16)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
As a disabled pipe in pipe_mask is not having a valid intel crtc,
driver wrongly populates the possible_crtcs mask while initializing
the plane for a CRTC. Fixing up the plane possible_crtcs mask.
changes since RFC:
- Simplify the possible_crtcs initialization. [Ville]
v2:
- Removed the unnecessary stack garbage possible_crtcs to
drm_universal_plane_init. [Ville]
v3:
- Combine the intel_crtc assignment and declaration. [Ville]
v4:
- Fix possible_crtcs abused bits from
intel_{primary,curosr,sprite}_plane_create(). [Ville]
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226163517.31234-1-anshuman.gupta@intel.com
Looks like the pipe rounding mode bit has moved from PIPE_CHICKEN to
PIPE_MISC on tgl. Frob the new location.
Bspec does still document the old bits as well, so I left the code
for them as is until we get clarification from the hw folks on
whether the old bits still do something useful.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226163054.9509-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
The #include has been splattered all over the place, but there are
precious few places, all .c files, that actually need it.
v2: remove leftover double newlines
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200225133131.3301-1-jani.nikula@intel.com
On Tiger Lake we do not support source keying in the pixel formats P010,
P012, P016.
v2: Move WA to end of function. Create helper function for format
check. Less verbose debugging messaging.
v3: whitespace
v4(MattR):
- Actually return EINVAL to reject this combination.
- Pass format parameter as u32.
- Make test TGL-specific for now.
- Switch to per-device logging.
- Shorten/simplify comment.
Bspec: 52890
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200224223651.3801646-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
On gen12, we no longer need to disable DC5/DC6 when when PG2 is in use
(which translates to cases where we're using VDSC on pipe A).
Bspec: 49193
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200220231843.3127468-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
- Clean up shadow batch after I915_EXEC_SECURE
- Drop assertion that active->fence is unchanged
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAl5Vau0ACgkQ+mJfZA7r
E8r5IQgAmBxjRdPYPcWP4IgsiyuhyUB+FTMOt84UonRdsE6dvalVibeS5CnaUKo0
8xfXnqubRYano7QiWbPhmQpIgeC2ZrM628xoThsySaitB4QG9eOHCpa1uXMWCd/j
/Jwh3tDiOdMpUunXPIlRFgNrNmGm5LM9APDEQDMouoknVb7GS4UaCMqlFU4LuBCm
2+sp4e5PHdJGrfalliNndICeD/bB1eBm6vrwKe4qNzDxyJJTF/1tcvzSyx/o1K2o
cAm3zvFmspWy5sC04XPFRG8POMjsobDBdD549wJjqah7z94DcDdFuRkZyHrZKBMW
2VLt3dUjTj1Z3Ib57ynqY24F7AIx3g==
=uXcx
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2020-02-25' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- A backmerge of drm-next solving conflicts on i915/gt/intel_lrc.c
- Clean up shadow batch after I915_EXEC_SECURE
- Drop assertion that active->fence is unchanged
Here goes drm-intel-next-2020-02-25:
- A backmerge of drm-next solving conflicts on i915/gt/intel_lrc.c
- Clean up shadow batch after I915_EXEC_SECURE
- Drop assertion that active->fence is unchanged
drm-intel-next-2020-02-24-1:
- RC6 fixes - Chris
- Add extra slice common debug register - Lionel
- Align virtual engines uabi_class/instance with i915_drm.h - Tvrtko
- Avoid potential division by zero in computing CS timestamp - Chris
- Avoid using various globals - Michal Winiarski, Matt Auld
- Break up long lists of GEM object reclaim - Chris
- Check that the vma hasn't been closed before we insert it - Chris
- Consolidate SDVO HDMI force_dvi handling - Ville
- Conversion to new logging and warn macros and functions - Pankaj, Wambul, Chris
- DC3CO fixes - Jose
- Disable use of hwsp_cacheline for kernel_context - Chris
- Display IRQ pre/post uninstall refactor - Jani
- Display port sync refactor for robustness and fixes - Ville, Manasi
- Do not attempt to reprogram IA/ring frequencies for dgfx - Chris
- Drop alpha_support for good in favor of force_probe - Jani
- DSI ACPI related fixes and refactors - Vivek, Jani, Rajat
- Encoder refactor for flexibility to add more information, especiallly DSI related - Jani, Vandita
- Engine workarounds refactor for robustness around resue - Daniele
- FBC simplification and tracepoints
- Various fixes for build - Jani, Kees Cook, Chris, Zhang Xiaoxu
- Fix cmdparser - Chris
- Fix DRM_I915_GEM_MMAP_OFFFSET - Chris
- Fix i915_request flags - Chris
- Fix inconsistency between pfit enable and scaler freeing - Stanislav
- Fix inverted warn_on on display code - Chris
- Fix modeset locks in sanitize_watermarks - Ville
- Fix OA context id overlap with idle context id - Umesh
- Fix pipe and vblank enable for MST - Jani
- Fix VBT handling for timing parameters - Vandita
- Fixes o kernel doc - Chris, Ville
- Force full modeset whenever DSC is enabled at probe - Jani
- Various GEM locking simplification and fixes - Jani , Chris, Jose
- Including some changes in preparation for making GEM execbuf parallel - Chris
- Gen11 pcode error codes - Matt Roper
- Gen8+ interrupt handler refactor - Chris
- Many fixes and improvements around GuC code - Daniele, Michal Wajdeczko
- i915 parameters improvements sfor flexible input and better debugability - Chris, Jani
- Ice Lake and Elkhart Lake Fixes and workarounds - Matt Roper, Jose, Vivek, Matt Atwood
- Improvements on execlists, requests and other areas, fixing hangs and also
improving hang detection, recover and debugability - Chris
- Also introducing offline GT error capture - Chris
- Introduce encoder->compute_config_late() to help MST - Ville
- Make dbuf configuration const - Jani
- Few misc clean ups - Ville, Chris
- Never allow userptr into the new mapping types - Janusz
- Poison rings after use and GTT scratch pages - Chris
- Protect signaler walk with RCU - Chris
- PSR fixes - Jose
- Pull sseu context updates under gt - Chris
- Read rawclk_freq earlier - Chris
- Refactor around VBT handling to allow geting information through the encoder - Jani
- Refactor l3cc/mocs availability - Chris
- Refactor to use intel_connector over drm_connector - Ville
- Remove i915_energy_uJ from debugfs - Tvrtko
- Remove lite restore defines - Mika Kuoppala
- Remove prefault_disable modparam - Chris
- Many selftests fixes and improvements - Chris
- Set intel_dp_set_m_n() for MST slaves - Jose
- Simplify hot plug pin handling and other fixes around pin and polled modes - Ville
- Skip CPU synchronization on dma-buf attachments - chris
- Skip global serialization of clear_range for bxt vtd - Chris
- Skip rmw for marked register - Chris
- Some other GEM Fixes - Chris
- Some small changes for satisfying static code analysis - Colin, Chris
- Suppress warnings for unused debugging locals
- Tiger Lake enabling, including re-enable -f RPS, workarounds and other display fixes and changes - Chris, Matt Roper, Mika Kuoppala, Anshuman, Jose, Radhakrishna, Rafael.
- Track hw reported context runtime - Tvrtko
- Update bug filling URL - Jani
- Use async bind for PIN_USER into bsw/bxt ggtt - Chris
- Use the kernel_context to measuer the breadcrumb size - Chris
- Userptr fixes and robustness for big pages - Matt Auld
- Various Display refactors and clean-ups, specially around logs and use of drm_i915_private - Jani, Ville
- Various display refactors and fixes, especially around cdclk, modeset, and encoder - Chris, Jani
- Various eDP/DP fixes around DPCD - Lyude
- Various fixes and refactors for better Display watermark handling - Ville, Stanislav
- Various other display refactors - Ville
- Various refactor for better handling of display plane states - Ville
- Wean off drm_pci_alloc/drm_pci_free - Chris
- Correctly terminate connector iteration- Ville
- Downgrade gen7 (ivb, byt, hsw) back to aliasing-ppgtt - Chris
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200225185853.GA3282832@intel.com
skl_ddb_allocation_overlaps() num_entries hass been passed as
INTEL_NUM_PIPES, it should be I915_MAX_PIPES.
v2:
- Rebased.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200224124004.26712-8-anshuman.gupta@intel.com
Add a WARN_ON for a disabled pipe in pipe_mask at
intel_get_crtc_for_pipe() function.
v2:
- Use drm_WARN_ON instead of WARN_ON.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200224124004.26712-7-anshuman.gupta@intel.com
intel_plane_fb_max_stride should return the max stride of
primary plane for first available pipe in intel device info
pipe_mask.
Similarly glk_force_audio_cdclk() should also use the first
available CRTC instead of pipe 'A' crtc to force the cdclk
changes.
changes since RFC:
- Introduced a helper to get first intel_crtc intel_get_first_crtc. [Ville]
v1:
- Used intel_get_first_crtc() instead of PIPE_A crtc in
glk_force_audio_cdclk(). [Ville]
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200224124004.26712-6-anshuman.gupta@intel.com
Skip the transcoder whose pipe is disabled while
initializing transcoder error state in 3 non-contiguous
display pipe system.
v2:
- Don't skip EDP_TRANSCODER error state. [Ville]
- Use a helper has_transcoder(). [Ville]
v3:
- Removed DSI transcoder case from has_transcoder(),
and few other cosmetic changes. [Ville]
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200224124004.26712-4-anshuman.gupta@intel.com
we can't have (pipe == crtc->index) assumption in
driver in order to support 3 non-contiguous
display pipe system.
FIXME: Remove the WARN_ON(drm_crtc_index(&crtc->base) != crtc->pipe)
when we will fix all such assumption.
changes since RFC:
- Added again removed (pipe == crtc->index) WARN_ON.
- Pass drm_crtc_index instead of intel pipe in order to
call drm_handle_vblank().
v2:
- Used drm_crtc_handle_vblank()/drm_crtc_wait_one_vblank()
instead of drm_handle_vblank/drm_wait_one_vblank(). [Jani]
- Introduced intel_handle_vblank() helper to avoid sprinkle
of intel_crtc across irq_handlers. [Ville]
v3:
- Moved intel_handle_vblank() from header to i915_irq.c. [Ville]
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200224124004.26712-3-anshuman.gupta@intel.com
It should not be assumed that a disabled display pipe will be
always last the pipe.
for_each_pipe() should iterate over I915_MAX_PIPES and check
for the disabled pipe and skip that pipe so that it should not
initialize the intel crtc for any disabled pipes.
Due to changes in for_each_pipe() macro, it requires to handle
the below compilation error.
"suggest explicit braces to avoid ambiguous ‘else’
[-Werror=dangling-else]"
v2:
- Cosmetic changes, removed unwanted parentheses. [Ville]
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200224124004.26712-2-anshuman.gupta@intel.com
Split inte_modeset_init() to parts before and after irq install, to
facilitate further cleanup. The error paths are a mess, otherwise no
functional changes.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200224120828.22105-1-jani.nikula@intel.com
Some DSI and VBT pending patches from Hans will apply
cleanly and with less ugly conflicts if they are rebuilt
on top of other patches that recently landed on drm-next.
Reference: https://patchwork.freedesktop.org/series/70952/
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com
Commit 60c6a14b48 ("drm/i915/display: Force the state compute phase
once to enable PSR") was forcing the state compute too earlier
causing errors because not everything was initialized, so here
moving to the end of i915_driver_modeset_probe() when the display is
all initialized.
Also fixing the place where it disarm the force probe as during the
atomic check phase errors could happen like the ones due locking and
it would cause PSR to never be enabled if that happens.
Leaving the disarm to the atomic commit phase, intel_psr_enable() or
intel_psr_update() will be called even if the current state do not
allow PSR to be enabled.
v2: Check if intel_dp is null in intel_psr_force_mode_changed_set()
v3: Check intel_dp before get dev_priv
v4:
- renamed intel_psr_force_mode_changed_set() to
intel_psr_set_force_mode_changed()
- removed the set parameter from intel_psr_set_force_mode_changed()
- not calling intel_psr_set_force_mode_changed() from
intel_psr_enable/update(), directly setting it after the same checks
that intel_psr_set_force_mode_changed() does
- moved intel_psr_set_force_mode_changed() arm call to
i915_driver_modeset_probe() as it is a better for a PSR call, all the
functions calls happening between the old and the new function call
will cause issue
Fixes: 60c6a14b48 ("drm/i915/display: Force the state compute phase once to enable PSR")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1151
Tested-by: Ross Zwisler <zwisler@google.com>
Reported-by: Ross Zwisler <zwisler@google.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200221212635.11614-1-jose.souza@intel.com
Restore the previous WARN_ON(cond) so that we don't complain about poor
old Cherryview.
Fixes: eb020ca3d4 ("drm/i915/display/dp: Make WARN* drm specific where drm_device ptr is available")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200223173959.3885742-1-chris@chris-wilson.co.uk
Variables declared in a switch statement before any case statements
cannot be automatically initialized with compiler instrumentation (as
they are not part of any execution flow). With GCC's proposed automatic
stack variable initialization feature, this triggers a warning (and they
don't get initialized). Clang's automatic stack variable initialization
(via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also
doesn't initialize such variables[1]. Note that these warnings (or silent
skipping) happen before the dead-store elimination optimization phase,
so even when the automatic initializations are later elided in favor of
direct initializations, the warnings remain.
To avoid these problems, move such variables into the "case" where
they're used or lift them up into the main function body.
drivers/gpu/drm/i915/display/intel_display.c: In function ‘check_digital_port_conflicts’:
drivers/gpu/drm/i915/display/intel_display.c:12963:17: warning: statement will never be executed [-Wswitch-unreachable]
12963 | unsigned int port_mask;
| ^~~~~~~~~
drivers/gpu/drm/i915/intel_pm.c: In function ‘vlv_get_fifo_size’:
drivers/gpu/drm/i915/intel_pm.c:474:7: warning: statement will never be executed [-Wswitch-unreachable]
474 | u32 dsparb, dsparb2, dsparb3;
| ^~~~~~
drivers/gpu/drm/i915/intel_pm.c: In function ‘vlv_atomic_update_fifo’:
drivers/gpu/drm/i915/intel_pm.c:1997:7: warning: statement will never be executed [-Wswitch-unreachable]
1997 | u32 dsparb, dsparb2, dsparb3;
| ^~~~~~
[1] https://bugs.llvm.org/show_bug.cgi?id=44916
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/202002201602.92CADF7D@keescook
We need to explicitly set the TLB Request Timer initial value in the
BW_BUDDY registers to 0x8 rather than relying on the hardware default.
v2: Apply missing REG_FIELD_PREP to ensure 0x8 is placed in the correct
bits during the rmw. (Jose)
Bspec: 52890
Bspec: 50044
Fixes: 3fa01d642f ("drm/i915/tgl: Program BW_BUDDY registers during display init")
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200219215655.2923650-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
On gen11 we only needed to program MBus credits into MBUS_ABOX_CTL
during display initialization, but on gen12 we're now supposed to
program the same values into MBUS_ABOX1_CTL and MBUS_ABOX2_CTL as well.
v2:
- Program registers with rmw to preserve contents of unrelated bits.
- Switch to the new display uncore helpers.
Bspec: 49213
Bspec: 50096
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200204011032.582737-2-matthew.d.roper@intel.com
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
It wasn't terribly clear from the bspec's wording, but after discussion
with the hardware folks, it turns out that we need to preserve the
pre-existing contents of the MBUS ABOX control register when
initializing a few specific bits.
Bspec: 49213
Bspec: 50096
Fixes: 4cb4585e5a ("drm/i915/icl: initialize MBus during display init")
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200204011032.582737-1-matthew.d.roper@intel.com
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
We have to write quite a few registers when programming the
pipe scaler. Let's use intel_de_write_fw() for these to reduce
the lockdep overhead a bit. All plane registers (including plane
scaler) already do this.
We already had a few accidental intel_de_write_fw() in there.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200212161738.28141-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Currently we only set the DRM_CONNECTOR_POLL_{DISCONNECT,CONNECT}
bits in intel_connector->polled (the base setting), leading to
some confusing looking code to reset drm_connector->polled
(the actual setting) to DRM_CONNECTOR_POLL_HPD. Let's set
intel_connector->polled = DRM_CONNECTOR_POLL_HPD for all hpd
capable connectors, and then we don't need so many special
cases in the hotplug code.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200205183546.9291-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
No point in looping over all connectors for each hpd pin. Just loop
over each connector first and deal with each one's hpd pin. Then
loop over all the hpd pins to mark them as enabled again.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200205183546.9291-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
UAPI Changes:
- lima: Add support for heap buffers
Cross-subsystem Changes:
Core Changes:
- Implement mode_config mode_valid for memory constrained drivers
- Bus format negociation between bridges
- Consolidate fake vblank events for drivers without vblank interrupts
- drm/bufs: dma_alloc related cleanups
- drm/dp_mst: Various fixes
- drm/print: New drm_device based print helpers
- Thomas is a drm-misc maintainer now!
Driver Changes:
- DPMS cleanups for atomic drivers
- Removal of owner field in SPI tinydrm drivers
- Removal of explicit dependency on DT for tinydrm drivers
- Conversion to YAML schemas for DT bindings
- tidss: New driver
- virtio: various reworks and fixes
- Our usual dozen or so new panels or bridges
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXkEjOgAKCRDj7w1vZxhR
xeaDAQD+1MludG4RmfQhATe4jTsPC1r2x63OF2CA0ChMGHXJyQEA8qqQ+8y1Cd/u
PZ3PpcTl4qYYHgzJ6FwW7kDPTvlaZQE=
=IJAt
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2020-02-10' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.7:
UAPI Changes:
- lima: Add support for heap buffers
Cross-subsystem Changes:
Core Changes:
- Implement mode_config mode_valid for memory constrained drivers
- Bus format negociation between bridges
- Consolidate fake vblank events for drivers without vblank interrupts
- drm/bufs: dma_alloc related cleanups
- drm/dp_mst: Various fixes
- drm/print: New drm_device based print helpers
- Thomas is a drm-misc maintainer now!
Driver Changes:
- DPMS cleanups for atomic drivers
- Removal of owner field in SPI tinydrm drivers
- Removal of explicit dependency on DT for tinydrm drivers
- Conversion to YAML schemas for DT bindings
- tidss: New driver
- virtio: various reworks and fixes
- Our usual dozen or so new panels or bridges
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200210093421.xu4sofldm6wm6xq6@gilmour.lan
If one of the synced crtcs needs a full modeset, we need
to make sure all the synced crtcs are forced a full
modeset.
v3:
* Remove ~BIT(cpu_trans) which is a nop (Ville)
* use get_new_crtc_state and remove error check (Ville)
v2:
* Add tiles based on cpu_trans check (Ville)
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200214114126.13192-3-manasi.d.navare@intel.com
This patch pushes out the computation of master and slave
transcoders in crtc states after encoder's compute_config hook.
This ensures that the assigned master slave crtcs have exact same
mode and timings which is a requirement for Port sync mode
to be enabled.
v3:
* Make crtc_state const, remove crtc state NULL init (Ville)
v2:
* Correct indentation
* Rename to intel_ddi_port_sync_transcoders (Ville)
* remove unwanted debug (Ville)
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200214114126.13192-2-manasi.d.navare@intel.com
Add an optional secondary encoder state compute hook. This gets
called after the normak .compute_config() has been called for
all the encoders in the state. Thus in the new hook we can rely
on all derived state populated by .compute_config() to be already
set up. Should be useful for MST and port sync master/slave
transcoder selection.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200214114126.13192-1-manasi.d.navare@intel.com
Split intel_modeset_driver_remove() to two, the part with working irqs
before irq uninstall, and the part after irq uninstall. Move
irq_unintall() closer to the layer it belongs.
The error path in i915_driver_modeset_probe() looks obviously weird
after this, but remains as good or broken as it ever was. No functional
changes.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200214135058.7580-1-jani.nikula@intel.com
drm_pci_alloc and drm_pci_free are just very thin wrappers around
dma_alloc_coherent, with a note that we should be removing them.
Furthermore since
commit de09d31dd3
Author: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Date: Fri Jan 15 16:51:42 2016 -0800
page-flags: define PG_reserved behavior on compound pages
As far as I can see there's no users of PG_reserved on compound pages.
Let's use PF_NO_COMPOUND here.
drm_pci_alloc has been declared broken since it mixes GFP_COMP and
SetPageReserved. Avoid this conflict by weaning ourselves off using the
abstraction and using the dma functions directly.
Reported-by: Taketo Kabe
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1027
Fixes: de09d31dd3 ("page-flags: define PG_reserved behavior on compound pages")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <stable@vger.kernel.org> # v4.5+
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200202153934.3899472-1-chris@chris-wilson.co.uk
(cherry picked from commit c6790dc223)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We lack full state readout of DSC config, which may lead to DSC enable
using a config that's all zeros, failing spectacularly. Force full
modeset and thus compute config at probe to get a sane state, until we
implement DSC state readout. Any fastset that did appear to work with
DSC at probe, worked by coincidence. [1] is an example of a change that
triggered the issue on TGL DSI DSC.
[1] http://patchwork.freedesktop.org/patch/msgid/20200212150102.7600-1-ville.syrjala@linux.intel.com
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Fixes: fbacb15ea8 ("drm/i915/dsc: add basic hardware state readout support")
Acked-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200213140412.32697-3-stanislav.lisovskiy@intel.com
(cherry picked from commit a4277aa398)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Voltage level depends not only on the cdclk, but also on the DDI clock.
Last time the bspec voltage level table for EHL was updated, we only
updated the cdclk requirements, but forgot to account for the new port
clock criteria.
Bspec: 21809
Fixes: d147483884 ("drm/i915/ehl: Update voltage level checks")
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200207001417.1229251-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit 9d5fd37ed7)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl5JsVQeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGHZEH+wddtJO4dZk5TZdF
KZB2w2ldsCvrBZAmas1TVvm8ncvUf+ATUZcSIzvZ3YbLmxsuLF2Cz3kD+n+36Mvy
ejwq8Scl7jwnouYps/Gfd6rRj/uCafqST4qp15GMGeiy2ST4A8dJrv5IAgZhD8/N
SN1bSr1AXpZ2JlEzzLDQ/NdVoNMS6IzCOsaINZcc60/XQoQZFRBWamMJFqu+CmXD
SBJOybQNFJhziy45cGZSAl+67sSCcoPftwTs0Stu4CJsvFWRb3MsbNTDS51Hjcc4
3tdgGOhoNXzyzZr96MEAHmiaW4VLQv0PGgUfOajE35viMz48OrwCTru8Kbuae3XM
YHV4qJk=
=yiem
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXkpecgAKCRDj7w1vZxhR
xU4CAQD/8ZzfYroiiEI7FHEgvnuldGYZqA9kbNAO2Vueeac0OgD+Jojewdxy+pJ9
dxfA/POdtzx3hOdN+U1YgaDC0hbXwww=
=XgKq
-----END PGP SIGNATURE-----
Merge v5.6-rc2 into drm-misc-next
Lyude needs some patches in 5.6-rc2 and we didn't bring drm-misc-next
forward yet, so it looks like a good occasion.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Currently when we load the driver we set distrust_bios_wm=true, which
will cause active_pipe_changes to get flagged even when we're not
toggling any pipes on/off. The reason being that we want to fully
redistribute the dbuf among the active pipes and ignore whatever
state the firmware left behind.
Unfortunately when the code flags active_pipe_changes it doesn't
set state->modeset to true, which means the hardware dbuf state
won't actually get updated. Hence the hardware and software
states go out of sync, which can result in planes trying to use a
disabled dbuf slice. Suprisingly that only seems to corrupt the
display rather than making the whole display engine keel over.
Let's fix this for now by flagging state->modeset whenever
distrust_bios_wm is set.
Eventually we'll likely want to rip out all of this mess and
introduce proper statye tracking for dbuf. But that requires
more work. Toss in a FIXME to that effect.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: ff2cd8635e ("drm/i915: Correctly map DBUF slices to pipes")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200213140412.32697-4-stanislav.lisovskiy@intel.com
We lack full state readout of DSC config, which may lead to DSC enable
using a config that's all zeros, failing spectacularly. Force full
modeset and thus compute config at probe to get a sane state, until we
implement DSC state readout. Any fastset that did appear to work with
DSC at probe, worked by coincidence. [1] is an example of a change that
triggered the issue on TGL DSI DSC.
[1] http://patchwork.freedesktop.org/patch/msgid/20200212150102.7600-1-ville.syrjala@linux.intel.com
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Fixes: fbacb15ea8 ("drm/i915/dsc: add basic hardware state readout support")
Acked-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200213140412.32697-3-stanislav.lisovskiy@intel.com
TGL BIOS seems to enable both DBuf slices ocasionally, depending
how many displays are connected, while i915 according to BSpec
was powering on S1 DBuf slice, until a modeset was done.
This was causing a brief flash during the boot as we were
disabling slice, previously used by BIOS with that.
To prevent this, now we are ensuring tht we are enabling
_at least_ one slice, but if there are more, let's not
power them off.
Fixes: ff2cd8635e ("drm/i915: Correctly map DBUF slices to pipes")
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200213140412.32697-2-stanislav.lisovskiy@intel.com
Commit 1c9d2eb241 ("drm/i915: move intel_dp_set_m_n() to encoder for
DDI platforms") moved the intel_dp_set_m_n() from hsw_crtc_enable()
to intel_ddi_pre_enable_dp() but it missed add it to
intel_mst_pre_enable_dp() causing MST slaves to not work.
v2: Not setting intel_ddi_set_dp_msa() twice for MST master
Fixes: 1c9d2eb241 ("drm/i915: move intel_dp_set_m_n() to encoder for DDI platforms")
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200211185008.30806-1-jose.souza@intel.com
The i915_debugfs.c has grown more than a little unwieldy. Split out the
display related debugfs code to a file of its own under display/,
initialized with a separate call. No functional changes.
v2:
- Also moved i915_frontbuffer_tracking, i915_gem_framebuffer,
i915_power_domain_info, i915_dmc_info, i915_ipc_status (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200211161451.6867-2-jani.nikula@intel.com
Call cpu_latency_qos_add/update/remove_request() instead of
pm_qos_add/update/remove_request(), respectively, because the
latter are going to be dropped.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
The DMC firmware is about display. Move the handling under display. No
functional changes.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200211161451.6867-1-jani.nikula@intel.com
drm->dev_private is to be avoided. Use to_i915() on the struct
drm_device pointer instead. Rename the affected local dev_priv variables
to i915 while at it.
Cc: Wambui Karuga <wambui.karugax@gmail.com>
Reviewed-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200211134427.31605-1-jani.nikula@intel.com
VBLANK callbacks in struct drm_driver are deprecated in favor of their
equivalents in struct drm_crtc_funcs. Convert i915 over.
The callback struct drm_driver.get_scanout_position() is deprecated
in favor of struct drm_crtc_helper_funcs.get_scanout_position().
i915 doesn't use CRTC helpers. Instead pass i915's implementation of
get_scanout_position() to DRM core's
drm_crtc_vblank_helper_get_vblank_timestamp_internal().
v3:
* rename dcrtc to _crtc
* use intel_ prefix for i915_crtc_get_vblank_timestamp()
* update for drm_crtc_vblank_helper_get_vblank_timestamp_internal()
v2:
* use DRM's implementation of get_vblank_timestamp()
* simplify function names
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-8-tzimmermann@suse.de
s/before/after/ again after accidentally changing it the
other way in commit 5604e9ceae ("drm/i915: Simplify
intel_set_cdclk_{pre,post}_plane_update() calling convention")
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200204154803.25403-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Accidentally removed the 'ret=0' initialization, and thus
we're potentially looking at some stack garbage here.
The whole 'ret = do_stuff; if (!ret) do_other_stuff;' pattern
confuses my brain so let's replace it with the standard
immediate return thing.
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: 28a30b45f5 ("drm/i915: Convert cdclk to global state")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200207152228.1054-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Converts various instances of the printk based drm logging macros to the
struct drm_device based logging macros in
i915/display/intel_dp_link_training.c.
This also involves extracting the drm_i915_private device pointer from
the intel_dp type to use in the various macros.
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200206080014.13759-3-wambui.karugax@gmail.com
As Gen12 onwards there are HDCP instances for each transcoder
instead of port, remove the (port < PORT_E) hdcp support
limitation for platform >= Gen12.
v2:
- Nuke the comment and cosmetic changes. [Jani]
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200207144116.20172-1-anshuman.gupta@intel.com
A recent bspec update added an extra voltage level that we didn't have
on ICL and new criteria for selecting the level.
Bspec: 49208
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200207001417.1229251-2-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Voltage level depends not only on the cdclk, but also on the DDI clock.
Last time the bspec voltage level table for EHL was updated, we only
updated the cdclk requirements, but forgot to account for the new port
clock criteria.
Bspec: 21809
Fixes: d147483884 ("drm/i915/ehl: Update voltage level checks")
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200207001417.1229251-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Add a basic description about how DC3CO works to help people not
familiar with it.
While at it, I also improved the delayed work handle and function
names and removed a debug message that is ambiguous and not much
useful, no changes in behavior here.
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200205214945.131012-1-jose.souza@intel.com
intel_prepare_plane_fb() will always pin plane_state->hw.fb whenever
it is present. We copy that from the master plane to the slave plane,
but we fail to copy the corresponding ggtt view. Thus when it comes time
to pin the slave plane's fb we use some stale ggtt view left over from
the last time the plane was used as a non-slave plane. If that previous
use involved 90/270 degree rotation or remapping we'll try to shuffle
the pages of the new fb around accordingingly. However the new
fb may be backed by a bo with less pages than what the ggtt view
rotation/remapped info requires, and so we we trip a GEM_BUG().
Steps to reproduce on icl:
1. plane 1: whatever
plane 6: largish !NV12 fb + 90 degree rotation
2. plane 1: smallish NV12 fb
plane 6: make invisible so it gets slaved to plane 1
3. GEM_BUG()
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/issues/951
Fixes: 1f594b209f ("drm/i915: Remove special case slave handling during hw programming, v3.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200110183228.8199-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 103605e0d1)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Commit 21fd23ac22 ("drm/i915: move pipe, pch and vblank enable to
encoders on DDI platforms") pushed pipe and vblank enable to encoders on
DDI platforms, however it missed the DP MST encoder. Fix it.
Fixes: 21fd23ac22 ("drm/i915: move pipe, pch and vblank enable to encoders on DDI platforms")
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reported-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Tested-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200205082959.31317-1-jani.nikula@intel.com
Fix htotal and vtotal parameters derived from DTD block of VBT. The
values miss the back porch.
Fixes: 33ef6d4fd8 ("drm/i915/vbt: Handle generic DTD block")
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200124125829.16973-1-vandita.kulkarni@intel.com
(cherry picked from commit ad278f3584)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Remove the i2c_bus_num >= 0 check from the adapter lookup function
as this would prevent ACPI bus number override. This check was mainly
there to return early if the bus number has already been found but we
anyway return in the next line if the slave address does not match.
Fixes: 8cbf89db29 ("drm/i915/dsi: Parse the I2C element from the VBT MIPI sequence block (v3)")
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Nabendu Maiti <nabendu.bikash.maiti@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200118005848.20382-1-vivek.kasireddy@intel.com
(cherry picked from commit de409661c4)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The post-fastset "does anyone still need a full modeset?" for
port sync looks busted. The outer loop bails out of a full modeset
is still needed by the current crtc, and then we skip forcing
a full modeset on the related crtcs. That's totally the opposite
of what we want.
The MST path has the logic mostly the other way around so it
looks correct. To fix the port sync case let's follow the MST
logic for both. So, if the current crtc already needs a modeset
we do nothing. otherwise we check if any of the related crtcs
needs a modeset, and if so we force a full modeset for the
current crtc.
And while at let's change the else if to a plain if to so
we don't have needless coupling between the MST and port sync
checks.
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Fixes: 05a8e45136 ("drm/i915/display: Use external dependency loop for port sync")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200115190813.17971-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit d0eed1545f)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Perform the i2c bus/adapter lookup from ACPI Namespace only if ACPI is
enabled in the kernel config. If ACPI is not enabled or if the lookup
fails, we'll fallback to using the VBT for identifying the i2c bus.
v2: Add fixes tag (Jani)
Fixes: 8cbf89db29 ("drm/i915/dsi: Parse the I2C element from the VBT MIPI sequence block (v3)")
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Nabendu Maiti <nabendu.bikash.maiti@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200115012305.27395-1-vivek.kasireddy@intel.com
(cherry picked from commit 960287ca58)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
This reverts commit d2a4bb6f8b.
So, turns out that this ended up just breaking things. While many
laptops incorrectly advertise themselves as supporting PWM backlight
controls, they actually will only work with DPCD backlight controls.
Unfortunately, it also seems there are a number of systems which
advertise DPCD backlight controls in their eDP DPCD but don't actually
support them. Talking with some laptop manufacturers has shown it might
be possible to probe this support via the EDID (!?!?) but I haven't been
able to confirm that this would work on any other manufacturer's
systems.
So in the mean time, we'll just revert this commit for now and go back
to the old way of doing things.
Fixes: d2a4bb6f8b ("drm/i915: Don't use VBT for detecting DPCD backlight controls")
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200204192823.111404-2-lyude@redhat.com
TGL is suffering of timeouts and fifo underruns when disabling
transcoder in MST mode, this is fixed by set TRANS_DDI_MODE_SELECT to
0(HDMI mode) when clearing DDI select.
Although BSpec disable sequence don't require this step, it is a
harmless change and it is also done by Windows driver.
Anyhow HW team was notified about that but it can take some time to
documentation to be updated.
A case that always lead to those issues is:
- do a modeset enabling pipe A and pipe B in the same MST stream
leaving A as master
- disable pipe A, promote B as master doing a full modeset in A
- enable pipe A, changing the master transcoder back to A(doing a
full modeset in B)
- Pow: underruns and timeouts
The transcoders involved will only work again when complete disabled
and their power wells turned off causing a reset in their registers.
v2: Setting TRANS_DDI_MODE_SELECT to default when clearing DDI select
not anymore when disabling TRANS_DDI, both work but this one looks
more safe. (Ville comment)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200203225549.152301-1-jose.souza@intel.com
Start manipulating DBuf slices as a mask,
but not as a total number, as current approach
doesn't give us full control on all combinations
of slices, which we might need(like enabling S2
only can't enabled by setting enabled_slices=1).
Removed wrong code from intel_get_ddb_size as
it doesn't match to BSpec. For now still just
use DBuf slice until proper algorithm is implemented.
Other minor code refactoring to get prepared
for major DBuf assignment changes landed:
- As now enabled slices contain a mask
we still need some value which should
reflect how much DBuf slices are supported
by the platform, now device info contains
num_supported_dbuf_slices.
- Removed unneeded assertion as we are now
manipulating slices in a more proper way.
v2: Start using enabled_slices in dev_priv
v3: "enabled_slices" is now "enabled_dbuf_slices_mask",
as this now sits in dev_priv independently.
v4: - Fixed debug print formatting to hex(Matt Roper)
- Optimized dbuf slice updates to be used only
if slice union is different from current conf(Matt Roper)
- Fixed some functions to be static(Matt Roper)
- Created a parameterized version for DBUF_CTL to
simplify DBuf programming cycle(Matt Roper)
- Removed unrequred field from GEN10_FEATURES(Matt Roper)
v5: - Removed redundant programming dbuf slices helper(Ville Syrjälä)
- Started to use parameterized loop for hw readout to get slices
(Ville Syrjälä)
- Added back assertion checking amount of DBUF slices enabled
after DC states 5/6 transition, also added new assertion
as starting from ICL DMC seems to restore the last DBuf
power state set, rather than power up all dbuf slices
as assertion was previously expecting(Ville Syrjälä)
v6: - Now using enum for DBuf slices in this patch (Ville Syrjälä)
- Removed gen11_assert_dbuf_enabled and put gen9_assert_dbuf_enabled
back, as we really need to have a single unified assert here
however currently enabling always slice 1 is enforced by BSpec,
so we will have to OR enabled slices mask with 1 in order
to be consistent with BSpec, that way we can unify that
assertion and against the actual state from the driver, but
not some hardcoded value.(concluded with Ville)
- Remove parameterized DBUF_CTL version, to extract it to another
patch.(Ville Syrjälä)
v7:
- Removed unneeded hardcoded return value for older gens from
intel_enabled_dbuf_slices_mask - this now is handled in a
unified manner since device info anyway returns max dbuf slices
as 1 for older platforms(Matthew Roper)
- Now using INTEL_INFO(dev_priv)->num_supported_dbuf_slices instead
of intel_dbuf_max_slices function as it is trivial(Matthew Roper)
v8: - Fixed icl_dbuf_disable to disable all dbufs still(Ville Syrjälä)
v9: - Renamed _DBUF_CTL_S to DBUF_CTL_S(Ville Syrjälä)
- Now using power_domain mutex to protect from race condition, which
can occur because intel_dbuf_slices_update might be running in
parallel to gen9_dc_off_power_well_enable being called from
intel_dp_detect for instance, which causes assertion triggered by
race condition, as gen9_assert_dbuf_enabled might preempt this
when registers were already updated, while dev_priv was not.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200202230630.8975-6-stanislav.lisovskiy@intel.com
Now start using parameterized DBUF_CTL instead
of hardcoded, this would allow shorter access
functions when reading or storing entire state.
Tried to implement it in a MMIO_PIPE manner, however
DBUF_CTL1 address is higher than DBUF_CTL2, which
implies that we have to now subtract from base
rather than add.
v2: - Removed unneeded DBUF_CTL_DIST and DBUF_CTL_ADDR
macros. Started to use _PICK construct as suggested
by Matt Roper.
v3: - _DBUF_CTL_S* to DBUF_CTL_S*, changed X to "slice"
in macro(Ville Syrjälä)
- Introduced enum for enumerating DBUF slices(Ville Syrjälä)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200202230630.8975-5-stanislav.lisovskiy@intel.com
During full modeset, global state(i.e dev_priv) is protected
by locking the crtcs in state, otherwise global state is not
serialized. Also if it is not a full modeset, we anyway
don't need to change DBuf slice configuration as Pipe configuration
doesn't change.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200202230630.8975-4-stanislav.lisovskiy@intel.com
Current DBuf slices update wasn't done in proper
place, especially its "post" part, which should
disable those only once vblank had passed and
all other changes are committed.
v2: Fix to use dev_priv and intel_atomic_state
instead of skl_ddb_values
(to be nuked in Villes patch)
v3: Renamed "enabled_slices" to "enabled_dbuf_slices_num"
(Matt Roper)
v4: - Rebase against drm-tip.
- Move post_update closer to optimize_watermarks,
to prevent unneeded noise from underrun reporting
(Ville Syrjälä)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200202230630.8975-3-stanislav.lisovskiy@intel.com
Current consensus that it is redundant as
we already have skl_ddb_values struct out there,
also this struct contains only single member
which makes it unnecessary.
v2: As dirty_pipes soon going to be nuked away
from skl_ddb_values, evacuating enabled_slices
to safer in dev_priv.
v3: Changed "enabled_slices" to be "enabled_dbuf_slices_num"
(Matt Roper)
v4: - Wrapped the line getting number of dbuf slices(Matt Roper)
- Removed indeed redundant skl_ddb_values declaration(Matt Roper)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200202230630.8975-2-stanislav.lisovskiy@intel.com
As only the display codes tries to pin its preallocated framebuffer into
an exact location in the GGTT, remove the convenience function and make
the pin management explicit in the display code. Then throughout the
display management, we track the framebuffer and its plane->vma; with
less single purpose code and ready for first class i915_vma.
In doing so, this should fix the BUG_ON(vma->pages) on fi-kbl-soraka.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200204094801.877288-2-chris@chris-wilson.co.uk
I am about to stuff more objects into the plane_config and would like to
have it clean up after itself. Move the current framebuffer release into
a common function so it can be extended with the new object with
relative ease.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200204094801.877288-1-chris@chris-wilson.co.uk
The DDI encoder code shouln't have to know about the guts of
HDCP. Abstract the pipe update code to a new intel_hdcp_update_pipe() in
intel_hdcp.c. No functional changes.
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200128163803.5954-1-jani.nikula@intel.com
Let's make sure encoder->hpd_pin and connector->polled are mirror
images of each other (when we want to use polling). The other
potentially polled connectors (sdvo and tv) already get this right.
Also nuke the redundant force_hotplug_required initialization
(the thing is kzalloc()ed).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200121171100.4370-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Simplify the hotplug code connector->encoder->hpd_pin handling
by introducing a helper for exactly this purpose.
In the helper we can neatly deal with the potential lack of an
attached encoder on fresh MST connectors leaving the rest of the
hpd code oblivious to such details.
Cc: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200121171100.4370-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
drm_pci_alloc and drm_pci_free are just very thin wrappers around
dma_alloc_coherent, with a note that we should be removing them.
Furthermore since
commit de09d31dd3
Author: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Date: Fri Jan 15 16:51:42 2016 -0800
page-flags: define PG_reserved behavior on compound pages
As far as I can see there's no users of PG_reserved on compound pages.
Let's use PF_NO_COMPOUND here.
drm_pci_alloc has been declared broken since it mixes GFP_COMP and
SetPageReserved. Avoid this conflict by weaning ourselves off using the
abstraction and using the dma functions directly.
Reported-by: Taketo Kabe
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1027
Fixes: de09d31dd3 ("page-flags: define PG_reserved behavior on compound pages")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <stable@vger.kernel.org> # v4.5+
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200202153934.3899472-1-chris@chris-wilson.co.uk
Let's add a copy of the active_pipes bitmask into the cdclk_state.
While this is duplicating a bit of information we may already
have elsewhere, I think it's worth it to decopule the cdclk stuff
from whatever else wants to use that bitmask. Also we want to get
rid of all the old ad-hoc global state which is what the current
bitmask is, so this removes one obstacle.
The one extra thing we have to remember is write locking the cdclk
state whenever the bitmask changes.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200120174728.21095-19-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Let's convert cdclk_state to be a proper global state. That allows
us to use the regular atomic old vs. new state accessor, hopefully
making the code less confusing.
We do have to deal with a few more error cases in case the cdclk
state duplication fails. But so be it.
v2: Fix new plane min_cdclk vs. old crtc min_cdclk check
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200121140353.25997-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Extract a small helper to compute the active pipes bitmask
based on the old bitmask + the crtcs in the atomic state.
I want to decouple the cdclk state entirely from the current
global state so I want to track the active pipes also inside
the (to be introduced) full cdclk state.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200120174728.21095-17-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Now that we have the more formal global state thing let's
use if for memory bandwidth tracking. No real difference
to the current private object usage since we already
tried to avoid taking the single serializing lock needlessly.
But since we're going to roll the global state out to more
things probably a good idea to unify the approaches a bit.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200120174728.21095-16-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Our current global state handling is pretty ad-hoc. Let's try to
make it better by imitating the standard drm core private object
approach.
The reason why we don't want to directly use the private objects
is locking; Each private object has its own lock so if we
introduce any global private objects we get serialized by that
single lock across all pipes. The global state apporoach instead
uses a read/write lock type of approach where each individual
crtc lock counts as a read lock, and grabbing all the crtc locks
allows one write access.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200120174728.21095-15-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Give the cdclk init/uninit functions a _hw suffix to make
it clear they are about initializing the actual hardware.
I'll be wanting to to add a intel_cdclk_init() which is
purely initializing software structures.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200120174728.21095-12-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
intel_cdclk_needs_cd2x_update() is named rather confusingly.
We don't have to do a cd2x update, rather we are allowed to
do one (as opposed to a full PLL reprogramming with its heavy
handed modeset). So let's rename the function to
intel_cdclk_can_cd2x_update().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200120174728.21095-7-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Move the min_cdclk[] and min_voltage_level[] arrays under the
rest of the cdclk state. And while at it provide a simple
helper (intel_cdclk_clear_state()) to clear the state during
the ww_mutex backoff dance.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200120174728.21095-6-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Move the initial setup of state->{cdclk,min_cdclk[],min_voltage_level[]}
into intel_modeset_calc_cdclk(), and we'll move the counterparts into
intel_cdclk_swap_state(). This encapsulates the cdclk state much better.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200120174728.21095-5-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
The linetime watermarks really have very little in common with the
plane watermarks. It looks to be cleaner to simply track them in
the crtc_state and program them from the normal modeset/fastset
paths.
The only dark cloud comes from the fact that the register is
still supposedly single buffered. So in theory it might still
need some form of two stage programming. Note that even though
HSW/BDWhave two stage programming we never computed any special
intermediate values for the linetime watermarks, and on SKL+
we don't even have the two stage stuff plugged in since everything
else is double buffered. So let's assume it's all fine and
continue doing what we've been doing.
Actually on HSW/BDW the value should not even change without
a full modeset since it doesn't account for pfit downscaling.
Thus only fastboot might be affected. But on SKL+ the pfit
scaling factor is take into consideration so the value may
change during any fastset.
As a bonus we'll plug this thing into the state
checker/dump now.
v2: Rebase due to bigjoiner prep
v2: Only compute ips linetime for IPS capable pipes.
Bspec says the register values is ignored for other
pipes, but in fact it can't even be written so the
state checker becomes unhappy if we don't compute
it as zero.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200120174728.21095-3-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Enable the dsi transcoder, panel and backlight as part of
encoder->enable and not encoder->pre_enable. We need to have pipe src
size, among other things, set before enabling the transcoder, to avoid
FIFO underruns and possibly other issues.
v2 by Jani:
- Rebase on the crtc enable sequence update
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200128162850.8660-2-jani.nikula@intel.com
To allow better flexibility for encoder specific code, push
intel_enable_pipe(), lpt_pch_enable() and intel_crtc_vblank_on() down to
the encoders from hsw_crtc_enable().
There's slight duplication, but also more clarity with the reduced
conditional statements.
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200128162850.8660-1-jani.nikula@intel.com
Avoid releasing the same stolen nodes causing a use-after-free and/or
explosions as the self-checks fail, as __intel_fbc_cleanup_cfb() may be
called multiple times during module unload.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200130135136.1878646-1-chris@chris-wilson.co.uk
The aux ch is used for more than DDC, so let's give it a better
name. For maximum ease let's include both the AUX ch identifier
and the port identifier (for cases where the VBT has redefined
the relationship of the two).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200123154542.12271-3-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
We've added more internal things that use modeset locks and
thus we need to be prepared for intel_atomic_check() grabbing
more locks than what our initial drm_modeset_lock_all_ctx()
took. So we're missing the backoff handling here.
Also drm_atomic_helper_duplicate_state() works against us
by clearing state->acquire_ctx in anticipation of
drm_atomic_helper_commit_duplicated_state() being used to
commit the state.
We could probably just reset acquire_ctx back, but instead
let's just rewrite the whole thing without using either of
those "helpers". There's also no need to add any connectors
to the state here since we just want the new watermarks
which don't depend on connectors.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200122204329.2477-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Despite that during hw readout we seem to have scalers assigned
to pipes, then call atomic_setup_scalers, at the commit stage in
skl_update_scaler there is a check, that if we have fb src and
dest of same size, we stage freeing of that scaler.
However we don't update pfit.enabled flag then, which makes
the state inconsistent, which in turn triggers a WARN_ON
in skl_pfit_enable, because we have pfit enabled,
but no assigned scaler.
To me this looks weird that we kind of do the decision
to use or not use the scaler at skl_update_scaler stage
but not in intel_atomic_setup_scalers, moreover
not updating the whole state consistently.
This fix is to not free the scaler if we have pfit.enabled
flag set, so that the state is now consistent
and the warnings are gone.
v2: - Put pfit.enable check into crtc specific place
(Ville Syrjälä)
Bugzilla: https://gitlab.freedesktop.org/drm/intel/issues/577
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Tomi Sarvela <tomi.p.sarvela@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200124172301.16484-1-stanislav.lisovskiy@intel.com
drivers/gpu/drm/i915/display/intel_atomic.c:185: warning: Function parameter or member 'state' not described in 'intel_connector_needs_modeset'
drivers/gpu/drm/i915/display/intel_atomic.c:185: warning: Function parameter or member 'connector' not described in 'intel_connector_needs_modeset'
drivers/gpu/drm/i915/display/intel_fbc.c:1124: warning: Function parameter or member 'state' not described in 'intel_fbc_enable'
drivers/gpu/drm/i915/display/intel_fbc.c:1124: warning: Excess function parameter 'crtc_state' description in 'intel_fbc_enable'
drivers/gpu/drm/i915/display/intel_fbc.c:1124: warning: Excess function parameter 'plane_state' description in 'intel_fbc_enable'
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200126195654.2172937-1-chris@chris-wilson.co.uk
This patch converts various instances of the printk based logging macros
in drm/i915/display/intel_display.c to the new struct drm_device based
logging macros.
In some instances, this involves extracting the struct drm_i915_private
device from various intel types and using it in the macros.
v2: use correct variable name in assignment over variable type.
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200121214641.7262-1-wambui.karugax@gmail.com
Perhaps in some cases the BIOS/GOP or other firmware may turn on
PHY A but may not program the MUX correctly. Therefore, re-program
PHY A if it is determined after reading the VBT that the value
programmed for the MUX bit does not match the expected value.
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200121235848.8457-1-vivek.kasireddy@intel.com
A recent change in BSpec allow us to change EXTLINE while transcoder
is enabled so this allow us to change it even when doing the first
fastset after taking over previous hardware state set by BIOS.
BIOS don't enable PSR, so if sink supports PSR it will be enabled on
the first fastset, so moving the EXTLINE compute and set to PSR flows
allow us to simplfy a bunch of code.
This will save a lot of time in all the IGT tests that uses CRC, as
when PSR2 is enabled CRCs are not generated, so we switch to PSR1, so
the previous code would compute dc3co_exitline=0 causing a full
modeset that would shutdown pipe, enable and train link.
v2: only programming EXTLINE when DC3CO is enabled
BSpec: 49196
Cc: Imre Deak <imre.deak@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200122182617.18597-2-jose.souza@intel.com
This will calculaet the DC3CO exit delay only once per full modeset.
Cc: Imre Deak <imre.deak@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200122182617.18597-1-jose.souza@intel.com
Remove the i2c_bus_num >= 0 check from the adapter lookup function
as this would prevent ACPI bus number override. This check was mainly
there to return early if the bus number has already been found but we
anyway return in the next line if the slave address does not match.
Fixes: 8cbf89db29 ("drm/i915/dsi: Parse the I2C element from the VBT MIPI sequence block (v3)")
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Nabendu Maiti <nabendu.bikash.maiti@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200118005848.20382-1-vivek.kasireddy@intel.com
In the port sync mode, for the master crtc, the master_transcoder is INVALID.
In that case since its value is -1, do not set the bit in the bitmask.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: d0eed1545f ("drm/i915: Fix post-fastset modeset check for port sync")
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200123002415.31478-1-manasi.d.navare@intel.com
Add convenience helpers for the most common uncore operations with
struct drm_i915_private * as context rather than struct intel_uncore *.
The goal is to replace all instances of I915_READ(),
I915_POSTING_READ(), I915_WRITE(), I915_READ_FW(), and I915_WRITE_FW()
in display/ with these, to finally be able to get rid of the implicit
dev_priv local parameter use.
The idea is that any non-u32 reads or writes are special enough that
they can use the intel_uncore_* functions directly.
v2:
- rename the file intel_de.h
- move intel_de_wait_for_* there too
- also add de fw helpers
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200121113915.9813-1-jani.nikula@intel.com
We've already pinned the vma and fence by the time we try to
deal with implicit fencing. Properly unpin the vma and fence
if the fence setup fails instead of just bailing straight out
from .prepare_fb(). As can be expected
drm_atomic_helper_prepare_planes() will not call .cleanup_fb()
for the plane whose .prepare_fb() failed so we must do the
cleanup ourself.
v2: Rebase
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200110183228.8199-6-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
intel_prepare_plane_fb() bails early if there is no fb (or rather
no obj, which is the same thing). intel_cleanup_plane_fb() does not.
This means the steps performed by intel_cleanup_plane_fb() aren't
balanced with with what was done intel_prepare_plane_fb() if there
is no fb for the plane. These hooks get called for every plane in
the state regardless of whether they have an fb or not.
Add a matching null obj check to intel_cleanup_plane_fb() to restore
the balance.
Note that intel_cleanup_plane_fb() has sufficient protections
already in place that the imbalance doesn't cause any real problems.
But having things be in balance seems nicer anyway, and might help
avoid some surprises in the future.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200110183228.8199-5-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Switch over to using explicit old/new planes states instead of
digging the old state out via plane->state. The main issue is that
plane->state will point to the uapi state which we generally don't
even want to look at.
Also it sets a bad example as using plane->state during commit_tail()
would be a bug. Here we're still holding the modeset locks so it's
actually safe, but best not give people bad ideas.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200110183228.8199-3-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Let's do the intel_plane_copy_uapi_to_hw_state() before we bail out
due to both old and new uapi.crtc being NULL. This will drop the
reference to the old hw.fb for planes that are transitioning from
being a slave plane to simply being disabled.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200110183228.8199-2-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Despite the fact that the VBT appears to have a field for specifying
that a system is equipped with a panel that supports standard VESA
backlight controls over the DP AUX channel, so far every system we've
spotted DPCD backlight control support on doesn't actually set this
field correctly and all have it set to INTEL_BACKLIGHT_DISPLAY_DDI.
While we don't know the exact reason for this VBT misuse, talking with
some vendors indicated that there's a good number of laptop panels out
there that supposedly support both PWM backlight controls and DPCD
backlight controls as a workaround until Intel supports DPCD backlight
controls across platforms universally. This being said, the X1 Extreme
2nd Gen that I have here (note that Lenovo is not the hardware vendor
that informed us of this) PWM backlight controls are advertised, but
only DPCD controls actually function. I'm going to make an educated
guess here and say that on systems like this one, it's likely that PWM
backlight controls might have been intended to work but were never
really tested by QA.
Since we really need backlights to work without any extra module
parameters, let's take the risk here and rely on the standard DPCD caps
to tell us whether AUX backlight controls are supported or not. We still
check the VBT, just so we can print a debugging message on systems that
advertise DPCD backlight support on the panel but not in the VBT.
Changes since v3:
* Print a debugging message if we enable DPCD backlight control on a
device which doesn't report DPCD backlight controls in it's VBT,
instead of warning on custom panel backlight interfaces.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112376
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Perry Yuan <pyuan@redhat.com>
Cc: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200117232155.135579-1-lyude@redhat.com
Eliminate the inconsistencies in the hdcp code local variables:
- use dev_priv over dev
- use to_i915() instead of dev->dev_private
- initialize variables when declaring them
- a bit of declaration suffling to appease ocd
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191204180549.1267-10-ville.syrjala@linux.intel.com
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Report port presence based on port presence in VBT alone, relaxing the
requirements on supported encoders (DP, DVI, or HDMI). The goal is to
make future changes easier, however there is a small risk of reporting
more ports present than before in case of dubious VBT.
Regarding the current callers of intel_bios_is_port_present(), the
potential issue might be caused by DVO_PORT_CRT being identified as port
E in dvo_port_to_port(). Hopefully no VBT has that on SKL+ which support
DP/DVI/HDMI on port E; the current CRT init code on HSW/BDW does not
care.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4338a29e4ed49e69f859dff1490fd85f6ae6177e.1579270868.git.jani.nikula@intel.com
Move the force_dvi check to a single function that can be called from
both mode validation and compute_config(). Note that currently we
don't call it from mode validation, but that will change soon.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200108181242.13650-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The strings we want to print to the on stack buffers should
be no more than
8 * 3 + strlen("(GET_SCALED_HDTV_RESOLUTION_SUPPORT)") + 1 = 61
bytes. So let's shrink the buffers down to 64 bytes.
Also switch the BUG_ON()s to WARN_ON()s if I made a mistake in
my arithmentic.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200108181242.13650-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
sync_mode_slaves_mask is a bitmask so use PIPE_CONF_CHECK_X() for it
so we get the mismatch printed in hex instead of decimal.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200115190813.17971-4-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Tested-by: Manasi Navare <manasi.d.navare@intel.com>
Let's use the pipe rather than the silly 'i' iterator from
for_each_oldnew_intel_crtc_in_state() for indexing the ddb
entries array. Maybe one day we can assume c99 and hide the
'i' entirely from sight.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200115190813.17971-3-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Currently we don't call intel_crtc_prepare_cleared_state() for crtcs
that are going to be entirely disabled (uapi.enable==false). That
means such crtcs will leave stale junk lying around in their states
and we have to sprinkle hw.enable checks all over before we can
look at the states. Let's change that a bit so that we aways do
the state clearing, even for fully disabled crtcs.
Note that we still keep some parts of the old state (see
intel_crtc_prepare_cleared_state() for the details) so probably
can't trust things 100% when hw.enable==false. But at least there's
less chance now that we end up looking at stale junk.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200115190813.17971-2-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
The post-fastset "does anyone still need a full modeset?" for
port sync looks busted. The outer loop bails out of a full modeset
is still needed by the current crtc, and then we skip forcing
a full modeset on the related crtcs. That's totally the opposite
of what we want.
The MST path has the logic mostly the other way around so it
looks correct. To fix the port sync case let's follow the MST
logic for both. So, if the current crtc already needs a modeset
we do nothing. otherwise we check if any of the related crtcs
needs a modeset, and if so we force a full modeset for the
current crtc.
And while at let's change the else if to a plain if to so
we don't have needless coupling between the MST and port sync
checks.
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Fixes: 05a8e45136 ("drm/i915/display: Use external dependency loop for port sync")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200115190813.17971-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
For eDP panels, it appears it's expected that so long as the panel is in
DPCD control mode that the brightness value is never set to 0. Instead,
if the desired effect is to set the panel's backlight to 0 we're
expected to simply turn off the backlight through the
DP_EDP_DISPLAY_CONTROL_REGISTER.
We already do the latter correctly in intel_dp_aux_disable_backlight().
But, we make the mistake of writing the DPCD registers in the wrong
order when enabling the backlight in intel_dp_aux_enable_backlight()
since we currently enable the backlight through
DP_EDP_DISPLAY_CONTROL_REGISTER before writing the brightness level. On
the X1 Extreme 2nd Generation, this appears to have the potential of
confusing the panel in such a way that further attempts to set the
brightness don't actually change the backlight as expected and leave it
off. Presumably, this happens because the incorrect register writing
order briefly leaves the panel with DPCD mode enabled and a 0 brightness
level set.
So, reverse the order we write the DPCD registers when enabling the
panel backlight so that we write the brightness value first, and enable
the backlight second. This fix appears to be the final bit needed to get
the backlight on the ThinkPad X1 Extreme 2nd Generation's AMOLED screen
working.
Tested-by: AceLan Kao <acelan.kao@canonical.com>
Tested-by: Perry Yuan <pyuan@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116211623.53799-4-lyude@redhat.com
Currently we always determine the initial panel brightness level by
simply reading the value from DP_EDP_BACKLIGHT_BRIGHTNESS_MSB/LSB. This
seems wrong though, because if the panel is not currently in DPCD
control mode there's not really any reason why there would be any
brightness value programmed in the first place.
This appears to be the case on the Lenovo ThinkPad X1 Extreme 2nd
Generation, where the default value in these registers is always 0 on
boot despite the fact the panel runs at max brightness by default.
Getting the initial brightness value correct here is important as well,
since the panel on this laptop doesn't behave well if it's ever put into
DPCD control mode while the brightness level is programmed to 0.
So, let's fix this by checking what the current backlight control mode
is before reading the brightness level. If it's in DPCD control mode, we
return the programmed brightness level. Otherwise we assume 100%
brightness and return the highest possible brightness level. This also
prevents us from accidentally programming a brightness level of 0.
This is one of the many fixes that gets backlight controls working on
the ThinkPad X1 Extreme 2nd Generation with optional 4K AMOLED screen.
Changes since v1:
* s/DP_EDP_DISPLAY_CONTROL_REGISTER/DP_EDP_BACKLIGHT_MODE_SET_REGISTER/
- Jani
Tested-by: AceLan Kao <acelan.kao@canonical.com>
Tested-by: Perry Yuan <pyuan@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116211623.53799-3-lyude@redhat.com
Max backlight value for the panel was being calculated using byte
count i.e. 0xffff if 2 bytes are supported for backlight brightness
and 0xff if 1 byte is supported. However, EDP_PWMGEN_BIT_COUNT
determines the number of active control bits used for the brightness
setting. Thus, even if the panel uses 2 byte setting, it might not use
all the control bits. Thus, max backlight should be set based on the
value of EDP_PWMGEN_BIT_COUNT instead of assuming 65535 or 255.
Additionally, EDP_PWMGEN_BIT_COUNT was being updated based on the VBT
frequency which results in a different max backlight value. Thus,
setting of EDP_PWMGEN_BIT_COUNT is moved to setup phase instead of
enable so that max backlight can be calculated correctly. Only the
frequency divider is set during the enable phase using the value of
EDP_PWMGEN_BIT_COUNT.
This is based off the original patch series from Furquan Shaikh
<furquan@google.com>:
https://patchwork.freedesktop.org/patch/317255/?series=62326&rev=3
Changes since original patch:
* Remove unused intel_dp variable in intel_dp_aux_setup_backlight()
* Fix checkpatch issues
* Make sure that we rewrite the pwmgen bit count whenever we bring the
panel out of D3 mode
v2 by Jani:
* rebase
* fix readb return value check
Cc: Furquan Shaikh <furquan@google.com>
Tested-by: AceLan Kao <acelan.kao@canonical.com>
Tested-by: Perry Yuan <pyuan@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116211623.53799-2-lyude@redhat.com
Perform the i2c bus/adapter lookup from ACPI Namespace only if ACPI is
enabled in the kernel config. If ACPI is not enabled or if the lookup
fails, we'll fallback to using the VBT for identifying the i2c bus.
v2: Add fixes tag (Jani)
Fixes: 8cbf89db29 ("drm/i915/dsi: Parse the I2C element from the VBT MIPI sequence block (v3)")
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Nabendu Maiti <nabendu.bikash.maiti@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200115012305.27395-1-vivek.kasireddy@intel.com
Both activate functions and the dc3co disable function were doing the
same thing, so better move to a function and share.
Also while at it adding a WARN_ON to catch invalid values.
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200113214603.52158-1-jose.souza@intel.com
fbc_supported() is just a pointless wrapper for HAS_FBC(). Get
rid of it. In places where we're operating on a specific plane
we can replace this with a plane->has_fbc check to avoid
doing anything for crtcs that don't even support fbc.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213133453.22152-4-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Instead of dealing with the presence/absence of the primary
plane in the higher level pre/post plane update code let's
move all that into the fbc code itself. Now the higher level
code doesn't have to think about FBC details anymore.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213133453.22152-3-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Final drm/i915 features for v5.6:
- DP MST fixes (José)
- Fix intel_bw_state memory leak (Pankaj Bharadiya)
- Switch context id allocation to xarray (Tvrtko)
- ICL/EHL/TGL workarounds (Matt Roper, Tvrtko)
- Debugfs for LMEM details (Lukasz Fiedorowicz)
- Prefer platform acronyms over codenames in symbols (Lucas)
- Tiled and port sync mode fixes for fbdev and DP (Manasi)
- DSI panel and backlight enable GPIO fixes (Hans de Goede)
- Relax audio min CDCLK requirements on non-GLK (Kai Vehmanen)
- Plane alignment and dimension check fixes (Imre)
- Fix state checks for PSR (José)
- Remove ICL+ clock gating programming (José)
- Static checker fixes around bool usage (Ma Feng)
- Bring back tests for self-contained headers in i915 (Masahiro Yamada)
- Fix DP MST disable sequence (Ville)
- Start converting i915 to the new drm device based logging macros (Wambui Karuga)
- Add DSI VBT I2C sequence execution (Vivek Kasireddy)
- Start using function pointers and ops structs in uc code (Michal)
- Fix PMU names to not use colons or dashes (Tvrtko)
- TGL media decompression support (DK, Imre)
- Split i915_gem_gtt.[ch] to more manageable chunks (Matthew Auld)
- Create dumb buffers in LMEM where available (Ram)
- Extend mmap support for LMEM (Abdiel)
- Selftest updates (Chris)
- Hack bump up CDCLK on TGL to avoid underruns (Stan)
- Use intel_encoder and intel_connector more instead of drm counterparts (Ville)
- Build error fixes (Zhang Xiaoxu)
- Fixes related to GPU and engine initialization/resume (Chris)
- Support for prefaulting discontiguous objects (Abdiel)
- Support discontiguous LMEM object maps (Chris)
- Various GEM and GT improvements and fixes (Chris)
- Merge pinctrl dependencies branch for the DSI GPIO updates (Jani)
- Backmerge drm-next for new logging macros (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87sgkil0v9.fsf@intel.com
TGL has now a table for RBR and HBR and another table for HBR2 over
combo phys. The HBR2 one has some small changes comparing to the ICL
one, so adding two new tables and adding a function to return TGL
combo phy tables.
v2:
- reordered the tgl_combo_phy_ddi_translations_dp_hbr2 to reduce diff
(Matt)
- removed definition of rates, kept using raw number(Jani and Ville)
- changed code to use icl_get_combo_buf_trans() for non-DP as those
are equal between TGL and ICL(Matt)
BSpec: 49291
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200110233902.154960-1-jose.souza@intel.com
intel_prepare_plane_fb() will always pin plane_state->hw.fb whenever
it is present. We copy that from the master plane to the slave plane,
but we fail to copy the corresponding ggtt view. Thus when it comes time
to pin the slave plane's fb we use some stale ggtt view left over from
the last time the plane was used as a non-slave plane. If that previous
use involved 90/270 degree rotation or remapping we'll try to shuffle
the pages of the new fb around accordingingly. However the new
fb may be backed by a bo with less pages than what the ggtt view
rotation/remapped info requires, and so we we trip a GEM_BUG().
Steps to reproduce on icl:
1. plane 1: whatever
plane 6: largish !NV12 fb + 90 degree rotation
2. plane 1: smallish NV12 fb
plane 6: make invisible so it gets slaved to plane 1
3. GEM_BUG()
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/issues/951
Fixes: 1f594b209f ("drm/i915: Remove special case slave handling during hw programming, v3.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200110183228.8199-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Life is usually easier when we pass around intel_ types instead
of drm_ types. In this case it might not be, but I think being
consistent is a good thing anyway. Also some of this might get
cleaned up a bit more later as we keep propagating the intel_
types further.
@find@
identifier F =~ "^intel_attached_.*";
identifier C;
@@
F(struct drm_connector *C)
{
...
}
@@
identifier find.F;
identifier find.C;
@@
F(
- struct drm_connector *C
+ struct intel_connector *connector
)
{
<...
- C
+ &connector->base
...>
}
@@
identifier find.F;
expression C;
@@
- F(C)
+ F(to_intel_connector(C))
@@
expression C;
@@
- to_intel_connector(&C->base)
+ C
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191204180549.1267-3-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
There seems to be some undocumented bandwidth
bottleneck/dependency which scales with CDCLK,
causing FIFO underruns when CDCLK is too low,
even when it's correct from BSpec point of view.
Currently for TGL platforms we calculate
min_cdclk initially based on pixel_rate divided
by 2, accounting for also plane requirements,
however in some cases the lowest possible CDCLK
doesn't work and causing the underruns.
We've found experimentally that raising cdclk to
at least pixel_rate (rather than pixel_rate/2)
eliminates these underruns, so let's use this as a
temporary workaround until the hardware team
can suggest a more precise remedy.
Explicitly stating here that this seems to be currently
rather a Hack, than final solution.
v2: Use clamp operation instead of min(Matt Roper)
v3: - Fixed commit message(Matt Roper)
- Now using pixel_rate instead of max_cdclk(Jani Nikula)
- Switched to max from clamp(Ville Syrjälä)
Hopefully this hybrid satisfies everyone :)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/issues/402
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200109220547.23817-1-stanislav.lisovskiy@intel.com
Not every platform needs quirk detection for panel orientation, so
split the drm_connector_init_panel_orientation_property into two
functions. One for platforms without the need for quirks, and the
other for platforms that need quirks.
Hans de Goede (changes in v2):
Rename the function from drm_connector_init_panel_orientation_property
to drm_connector_set_panel_orientation[_with_quirk] and pass in the
panel-orientation to set.
Beside the rename, also make the function set the passed in value
only once, if the value was set before (to a value other then
DRM_MODE_PANEL_ORIENTATION_UNKNOWN) make any further set calls a no-op.
This change is preparation for allowing the user to override the
panel-orientation for any connector from the kernel commandline.
When the panel-orientation is overridden this way, then we must ignore
the panel-orientation detection done by the driver.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200105155120.96466-1-hdegoede@redhat.com
Parsing the i2c element is mainly done to transfer the payload from the
MIPI sequence block to the relevant slave device. In some cases, the
commands that are part of the payload can be used to turn on the backlight.
This patch is actually a refactored version of this old patch:
https://lists.freedesktop.org/archives/intel-gfx/2014-December/056897.html
In addition to the refactoring, the original patch is augmented by
looking up the i2c bus from ACPI NS instead of relying on the bus number
provided in the VBT.
This patch was tested on Aava Mobile's Inari 10 tablet. It enabled
turning on the backlight by transferring the payload to the device.
v2:
- Add DRM_DEV_ERROR for invalid adapter and failed transfer and also
drop the DRM_DEBUG that existed originally. (Hans)
- Add two gotos instead of one to clean things up properly.
v3:
- Identify the device on which this patch was tested in the commit
message (Ville)
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Nabendu Maiti <nabendu.bikash.maiti@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200110181123.14536-1-vivek.kasireddy@intel.com
[why]
For DSC case we cannot use topology manager's PBN divider
variable. The default divider does not take FEC into account.
Therefore the driver has to calculate its own divider based
on the link rate and lane count its handling, as it is hw specific.
[how]
Pass pbn_div as an argument, which is used if its more than
zero, otherwise default topology manager's pbn_div will be used.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With DSC, bpp can be fractional in multiples of 1/16.
Change drm_dp_calc_pbn_mode to reflect this, adding a new
parameter bool dsc. When this parameter is true, treat the
bpp parameter as having units not of bits per pixel, but
1/16 of a bit per pixel
v2: Don't add separate function for this
v3: In the equation divide bpp by 16 as it is expected
not to leave any remainder
v4: Added DSC test parameters for selftest
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
I missed a few assert_pipe_disabled() cases when changing it to
take enum transcoder instead of enum pipe, making sparse unhappy.
Convert the leftovers.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200108145616.7349-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
When moving the pipe disable & co. function calls from
haswell_crtc_disable() into the encoder .post_disable() hooks I
neglected to account for the MST vs. DDI interactions properly.
This now leads us to call these functions two times for the last
MST stream (once from the MST code and a second time from the DDI
code). The calls from the DDI code should only be done for SST
and not MST. Add the proper check for that.
This results in an MCE on ICL. My vague theory is that we turn off
the transcoder clock from the MST code and then we proceed to touch
something in the DDI code which still depends on that clock causing
the hardware to become upset. Though I can't really explain why
Stan's hack of omitting the pipe disable in the MST code would avoid
the MCE since we should still be turning off the transcoder clock.
But maybe there's something magic in the hw that keeps the clock on
as long as the pipe is on. Or maybe the clock isn't the problem and
we now touch something in the DDI disable code that really does need
the pipe to be still enabled.
v2: Rebase to latest drm-tip
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Reported-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/issues/901
Fixes: 773b4b5435 ("drm/i915: Move stuff from haswell_crtc_disable() into encoder .post_disable()")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200108144550.29280-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Fixes coccicheck warning:
drivers/gpu/drm/i915/display/intel_crt.c:1066:1-28: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/i915/display/intel_crt.c:928:2-29: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/i915/display/intel_crt.c:443:2-29: WARNING: Assignment of 0/1 to bool variable
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ma Feng <mafeng.ma@huawei.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1578013959-31486-4-git-send-email-mafeng.ma@huawei.com
Fixes coccicheck warning:
drivers/gpu/drm/i915/display/intel_dp.c:4950:1-33: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/i915/display/intel_dp.c:4906:1-33: WARNING: Assignment of 0/1 to bool variable
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ma Feng <mafeng.ma@huawei.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1578013959-31486-3-git-send-email-mafeng.ma@huawei.com
Talked with HW team and this is a left over, driver should not
program clockgating, mg or dekel firmware is reponsible for any
clockgating programing.
Also removing the register and bits definition related to clockgating.
v2:
Added WARN_ON
v3:
Only calling icl_phy_set_clock_gating() on intel_ddi_pre_enable_hdmi
for GEN11
v4:
ICL should also not program clockgating (thanks Matt for catching
this)
BSpec issue: 20885
BSpec: 49292
BSpec: 21735
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107170922.153612-1-jose.souza@intel.com
Recent improvements in the state tracking in i915 caused PSR to not be
enabled when reusing firmware/BIOS modeset, this is due to all initial
commits returning ealier in intel_atomic_check() as needs_modeset()
is always false.
To fix that here forcing the state compute phase in CRTC that is
driving the eDP that supports PSR once. Enable or disable PSR do not
require a fullmodeset, so user will still experience glitch free boot
process plus the power savings that PSR brings.
It was tried to set mode_changed in intel_initial_commit() but at
this point the connectors are not registered causing a crash when
computing encoder state.
v2:
- removed function return
- change arguments to match intel_hdcp_atomic_check
v3:
- replaced drm includes in intel_psr.h by forward declaration(Jani)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112253
Reported-by: <s.zharkoff@gmail.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200106152128.195171-1-jose.souza@intel.com
This loop was added directly to intel_atomic_check() to be used by
all other features that have external pipe dependencies, so using it
and removing intel_atomic_check_synced_crtcs().
After this changes is_trans_port_sync_master() it not used anywhere,
so removing it.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200106142823.145260-1-jose.souza@intel.com
There is a cut and paste bug so we return the wrong error code.
Fixes: a603f5bd16 ("drm/i915/dp: Make sure all tiled connectors get added to the state with full modeset")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107130322.gdk5b6jurifr26c2@kili.mountain
Detect the modifier corresponding to media compression to enable
display decompression for YUV and xRGB packed formats. A new modifier is
added so that the driver can distinguish between media and render
compressed buffers. Unlike render decompression, plane 6 and plane 7 do not
support media decompression.
v2: Fix checkpatch warnings on code style (Lucas)
From DK:
Separate modifier array for planes that cannot decompress media (Ville)
v3: Support planar formats
v4: Switch plane order
v5:
- Use format block descriptors to get CCS subsampling calculation right
everywhere.
- Extend the plane state normal view array to accommodate 4 color planes.
- Use helpers to convert between main and CCS planes.
v6: Add missing packed YUV formats to the MC format list. (Yang)
v7: Align UV planes to tile-row size.
Cc: Nanley G Chery <nanley.g.chery@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Yang A Shi <yang.a.shi@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191231233756.18753-8-imre.deak@intel.com
As intel_fb_plane_get_subsampling() returns the subsampling factor wrt.
its main plane, for a CCS plane we need to apply both the main and the
CCS plane's subsampling factor on the FB's dimensions to get the CCS
plane's dimensions.
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191231233756.18753-5-imre.deak@intel.com
Print a debug message if the FB plane[0] offset is not 0 as expected, to
help understainding an add FB IOCTL fail.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191231233756.18753-4-imre.deak@intel.com
Currently the GGTT offset of a UV plane in a semiplanar YUV FB is tile
size (4kB) aligned. I noticed, that enforcing only this alignment leads
oddly to random memory corruptions on TGL while scanning out Y-tiled
FBs. This issue can be easily reproduced with a UV plane offset that is
not aligned to the plane's tile row size.
Some experiments showed the correct alignment to be tile row size
indeed. This also makes sense, since the de-tiling fence created for the
object - with its own stride and so "left" and "right" edge - applies to
all the planes in the FB, so each tile row of all planes should be tile
row aligned.
In fact BSpec requires this alignment since SKL. On SKL we may enforce
this due to the AUX plane x,y coords check, but on ICL and TGL we don't.
For now enforce this only on TGL; I can follow up with any necessary
change for ICL after more tests.
BSpec requires a stricter alignment for linear UV planes too (kind of a
tile row alignment), but it's unclear whether that's really needed
(couldn't be explained with the de-tiling fence as above) and enforcing
that could break existing user space; so avoid that too for now until
more tests.
v2:
- Clarify the commit log wrt. the address space the alignment applies to.
(Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191231233756.18753-3-imre.deak@intel.com
At least one framebuffer plane on TGL - the UV plane of YUV semiplanar
FBs - requires a non-power-of-2 alignment, so add support for this. This
new alignment restriction applies only to an offset within an FB, so the
GEM buffer itself containing the FB must still be power-of-2 aligned.
Add a check for this (in practice plane 0, since the plane 0 offset must
be 0).
v2:
- Fix WARN check for alignment=0.
v3:
- Return error for alignment programming bugs. (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191231233756.18753-2-imre.deak@intel.com
Revert changes done in commit f6ec948309 ("drm/i915: extend audio
CDCLK>=2*BCLK constraint to more platforms"). Audio drivers
communicate with i915 over HDA bus multiple times during system
boot-up and each of these transactions result in matching
get_power/put_power calls to i915, and depending on the platform,
a modeset change causing visible flicker.
GLK is the only platform with minimum CDCLK significantly lower
than BCLK, and thus for GLK setting a higher CDCLK is mandatory.
For other platforms, minimum CDCLK is close but below 2*BCLK
(e.g. on ICL, CDCLK=176.4kHz with BCLK=96kHz). Spec-wise the constraint
should be set, but in practise no communication errors have been
reported and the downside if set is the flicker observed at boot-time.
Revert to old behaviour until better mechanism to manage
probe-time clocks is available.
The full CDCLK>=2*BCLK constraint is still enforced at pipe
enable time in intel_crtc_compute_min_cdclk().
Bugzilla: https://gitlab.freedesktop.org/drm/intel/issues/913
Fixes: f6ec948309 ("drm/i915: extend audio CDCLK>=2*BCLK constraint to more platforms")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191231140007.31728-1-kai.vehmanen@linux.intel.com
On Bay Trail devices the MIPI power on/off sequences for DSI LCD panels
do not control the LCD panel- and backlight-enable GPIOs. So far, when
the VBT indicates we should use the SoC for backlight control, we have
been relying on these GPIOs being configured as output and driven high by
the Video BIOS (GOP) when it initializes the panel.
This does not work when the device is booted with a HDMI monitor connected
as then the GOP will initialize the HDMI instead of the panel, leaving the
panel black, even though the i915 driver tries to output an image to it.
Likewise on some device-models when the GOP does not initialize the DSI
panel it also leaves the mux of the PWM0 pin in generic GPIO mode instead
of muxing it to the PWM controller.
This commit makes the DSI code control the SoC GPIOs for panel- and
backlight-enable on BYT, when the VBT indicates the SoC should be used
for backlight control. It also ensures that the PWM0 pin is muxed to the
PWM controller in this case.
This fixes the LCD panel not lighting up on various devices when booted
with a HDMI monitor connected. This has been tested to fix this on the
following devices:
Peaq C1010
Point of View MOBII TAB-P800W
Point of View MOBII TAB-P1005W
Terra Pad 1061
Yours Y8W81
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191216205122.1850923-6-hdegoede@redhat.com
Move the Crystal Cove PMIC panel GPIO lookup-table from
drivers/mfd/intel_soc_pmic_core.c to the i915 driver.
The moved looked-up table is adding a GPIO lookup to the i915 PCI
device and the GPIO subsys allows only one lookup table per device,
The intel_soc_pmic_core.c code only adds lookup-table entries for the
PMIC panel GPIO (as it deals only with the PMIC), but we also need to be
able to access some GPIOs on the SoC itself, which requires entries for
these GPIOs in the lookup-table.
Since the lookup-table is attached to the i915 PCI device it really
should be part of the i915 driver, this will also allow us to extend
it with GPIOs from other sources when necessary.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191216205122.1850923-5-hdegoede@redhat.com
When the LCD has not been turned on by the firmware/GOP, because e.g. the
device was booted with an external monitor connected over HDMI, we should
not turn on the panel-enable GPIO when we request it.
Turning on the panel-enable GPIO when we request it, means we turn it on
too early in the init-sequence, which causes some panels to not correctly
light up.
This commits adds a panel_is_on parameter to intel_dsi_vbt_gpio_init()
and makes intel_dsi_vbt_gpio_init() set the initial GPIO value accordingly.
This fixes the panel not lighting up on a Thundersoft TST168 tablet when
booted with an external monitor connected over HDMI.
Changes in v2:
- Call intel_dsi_get_hw_state() to check if the panel is on instead of
relying on the current_mode pointer
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191216205122.1850923-4-hdegoede@redhat.com
On some older devices (BYT, CHT) which may use v2 VBT MIPI-sequences,
we need to manually control the panel enable GPIO as v2 sequences do
not do this.
So far we have been carrying the code to do this on BYT/CHT devices
with a Crystal Cove PMIC in vlv_dsi.c, but as this really is a shortcoming
of the VBT MIPI-sequences, intel_dsi_vbt.c is a better place for this,
so move it there.
This is a preparation patch for adding panel-enable and backlight-enable
GPIO support for BYT devices where instead of the PMIC the SoC is used
for backlight control.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191216205122.1850923-3-hdegoede@redhat.com
I implemented a small build rule in drivers/gpu/drm/i915/Makefile
without relying on the special header-test-y syntax that was removed in
commit fcbb8461fd ("kbuild: remove header compile test").
I excluded some headers from the test coverage. I hope somebody
intrested can take a closer look at them.
Dummy subdir Makefiles can be removed altogether as single target build
use case is now covered by commit 394053f4a4 ("kbuild: make single
targets work more correctly").
v2 by Jani:
- add selftests/i915_perf_selftests.h to no-header-test
- add .gitignore for *.hdrtest
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191219155652.2666-3-jani.nikula@intel.com
While clearing the Ports ync mode enable and master select bits
we need to clear the register completely instead of using disable masks
v3:
* Remove reg variable (Matt)
v2:
* Just write 0 to the reg (Ville)
* Rebase
Bugzilla: https://gitlab.freedesktop.org/drm/intel/issues/5
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Fixes: 51528afe7c ("drm/i915/display/icl: Disable transcoder port sync as part of crtc_disable() sequence")
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191228031204.10189-3-manasi.d.navare@intel.com
Add an extra check before making master slave assignments for tiled
displays to make sure we make these assignments only if all tiled
connectors are present. If not then initialize the state to defaults
so it does a normal non tiled modeset without transcoder port sync.
v4:
deafulat port sync values in prepare_cleared_state (Ville)
v3:
* Default master trans to INVALID to avoid pipe mismatch
v2:
* Rename icl_add_sync_mode_crtcs
* Move this function just before .compute_config hook
* Check if DP before master slave assignments (Ville)
Bugzilla: https://gitlab.freedesktop.org/drm/intel/issues/5
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191228031204.10189-2-manasi.d.navare@intel.com
In case of tiled displays, all the tiles are linke dto each other
for transcoder port sync. So in intel_atomic_check() we need to make
sure that we add all the tiles to the modeset and if one of the
tiles needs a full modeset then mark all other tiles for a full modeset.
We also need to force modeset for all synced crtcs after fastset check.
v6:
* Add comments about why we do not call
drm_atomic_helper_check_modeset (Matt)
* Add FIXME for a corner case where tile info might vanish (Matt)
v5:
* Rebase
v4:
* Fix logic for modeset_synced_crtcs (Ville)
v3:
* Add tile checks only for Gen >11
v2:
* Change crtc_state scope, remove tile_grp_id (Ville)
* Use intel_connector_needs_modeset() (Ville)
* Add modeset_synced_crtcs (Ville)
* Make sure synced crtcs are forced full modeset
after fastset check (Ville)
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Bugzilla: https://gitlab.freedesktop.org/drm/intel/issues/5
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191228031204.10189-1-manasi.d.navare@intel.com
We are currently using a mix of platform name and acronym to name the
functions. Let's prefer the acronym as it should be clear what platform
it's about and it's shorter, so it doesn't go over 80 columns in a few
cases. This converts ivybridge to ivb where appropriate.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191224084012.24241-9-lucas.demarchi@intel.com
We are currently using a mix of platform name and acronym to name the
functions. Let's prefer the acronym as it should be clear what platform
it's about and it's shorter, so it doesn't go over 80 columns in a few
cases. This converts broadwell to bdw where appropriate.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191224084012.24241-8-lucas.demarchi@intel.com
We are currently using a mix of platform name and acronym to name the
functions. Let's prefer the acronym as it should be clear what platform
it's about and it's shorter, so it doesn't go over 80 columns in a few
cases. This converts ironlake to ilk where appropriate.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191224084012.24241-7-lucas.demarchi@intel.com
We are currently using a mix of platform name and acronym to name the
functions. Let's prefer the acronym as it should be clear what platform
it's about and it's shorter, so it doesn't go over 80 columns in a few
cases. This converts icelake to icl where appropriate.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191224084012.24241-6-lucas.demarchi@intel.com
We are currently using a mix of platform name and acronym to name the
functions. Let's prefer the acronym as it should be clear what platform
it's about and it's shorter, so it doesn't go over 80 columns in a few
cases. This converts cannonlake to cnl where appropriate.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191224084012.24241-5-lucas.demarchi@intel.com
We are currently using a mix of platform name and acronym to name the
functions. Let's prefer the acronym as it should be clear what platform
it's about and it's shorter, so it doesn't go over 80 columns in a few
cases. This converts skylake to skl where appropriate.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191224084012.24241-4-lucas.demarchi@intel.com
We are currently using a mix of platform name and acronym to name the
functions. Let's prefer the acronym as it should be clear what platform
it's about and it's shorter, so it doesn't go over 80 columns in a few
cases. This converts haswell to hsw where appropriate.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191224084012.24241-3-lucas.demarchi@intel.com
We are currently using a mix of platform name and acronym to name the
functions. Let's prefer the acronym as it should be clear what platform
it's about and it's shorter, so it doesn't go over 80 columns in a few
cases. This converts pineview to pnv where appropriate.
v2: Add missing conversions in intel_pm.c (Matt Roper). While at it, fix
missing blank lines between structs that would otherwise trigger
checkpatch errors (Lucas)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191224084012.24241-2-lucas.demarchi@intel.com
WaDisableDARBFClkGating, now known as Wa_14010480278, has been added to
the workaround tables for ICL, EHL, and TGL so we need to extend our
platform test accordingly.
Bspec: 33450
Bspec: 33451
Bspec: 52890
Cc: stable@kernel.vger.org
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191224012026.3157766-2-matthew.d.roper@intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
This function is only called from port sync and it is identical to
what will be executed again in intel_update_crtc() over port sync
pipes.
If it is really necessary at least it deserves a better name and a
comment, leaving it to people working on port sync.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191223010654.67037-7-jose.souza@intel.com
MST master can not be disabled while it have attached MST slaves, so
it is necessary force a modeset in all of its slaves.
v3:
- moved handling to intel_atomic_check() this way is guarantee that
all pipes will have its state computed
v4:
- added a function to return if MST master neeeds modeset to simply
code in intel_atomic_check()
v5:
- fixed and moved code to check if MST master needs a modeset
v6:
- previons version of this patch was split into two patches
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191223010654.67037-6-jose.souza@intel.com
MST and port sync have master and slaves pipes and it brings
dependencies between pipes to allow fastset.
For example if only MST master needs a modeset all of its slaves also
needs to do a modeset.
This patch adds the base for external dependencies check, the MST and
port sync bits will be added in another patches.
v3:
- moved handling to intel_atomic_check() this way is guarantee that
all pipes will have its state computed
v4:
- added a function to return if MST master neeeds modeset to simply
code in intel_atomic_check()
v5:
- fixed and moved code to check if MST master needs a modeset
v6:
- previons version of this patch was split into two patches
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191223010654.67037-5-jose.souza@intel.com
The disable sequence after wait for transcoder off was not correctly
implemented.
The MST disable sequence is basically the same for HSW, SKL, ICL and
TGL, with just minor changes for TGL.
With this last patch we finally fixed the hotplugs triggered by MST
sinks during the disable/enable sequence, those were causing source
to try to do a link training while it was not ready causing CPU pipe
FIFO underrrus on TGL.
v2: Only unsetting TGL_TRANS_DDI_PORT_MASK for TGL on the post
disable sequence
v4: Rebased, moved MST sequences to intel_mst_post_disable_dp()
BSpec: 4231
BSpec: 4163
BSpec: 22243
BSpec: 49190
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191223010654.67037-4-jose.souza@intel.com
Due to DDB overlaps the pipe enabling sequence is not always crescent.
As the previous patch selects the smallest pipe/transcoder in the MST
stream to be master and it needs to be enabled first, this changes
were needed to guarantee that.
So first lets enable all pipes that do not need a fullmodeset as
those don't have any external dependency and those are the ones that
can overlap with each other.
Then on the second loop it will enable all the pipes that needs a
modeset and don't depends on other pipes like MST master
pipe/transcoder.
Then finally all the pipes that needs a modeset and have dependency
on other pipes, that at this point are alread enabled.
v3: rebased
v4:
- added check for modeset_pipes too to decide if is necessary for a
wait a vblank
- added DDB allocation overlap check for pipes that needs a modeset
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191223010654.67037-3-jose.souza@intel.com
On TGL the blending of all the streams have moved from DDI to
transcoder, so now every transcoder working over the same MST port must
send its stream to a master transcoder and master will send to DDI
respecting the time slots.
So here adding all the CRTCs that shares the same MST stream if
needed and computing their state again, it will pick the lowest
pipe/transcoder among the ones in the same stream to be master.
Most of the time skl_commit_modeset_enables() enables pipes in a
crescent order but due DDB overlapping it might not happen, this
scenarios will be handled in the next patch.
v2:
- Using recently added intel_crtc_state_reset() to set
mst_master_transcoder to invalid transcoder for all non gen12 & MST
code paths
- Setting lowest pipe/transcoder as master, previously it was the
first one but setting a predictable one will help in future MST e
port sync integration
- Moving to intel type as much as we can
v3:
- Now intel_dp_mst_master_trans_compute() returns the MST master transcoder
- Replaced stdbool.h by linux/types.h
- Skip the connector being checked in
intel_dp_mst_atomic_master_trans_check()
- Using pipe instead of transcoder to compute MST master
v4:
- renamed connector_state to conn_state
v5:
- Improved the parameters of intel_dp_mst_master_trans_compute() to
simply code
- Added call drm_atomic_add_affected_planes() in
intel_dp_mst_atomic_master_trans_check() as helper could not do it
for us
- Removed "if (ret)" left over from v3 changes
v6:
- handled ret == I915_MAX_PIPES case in compute
BSpec: 50493
BSpec: 49190
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191223010654.67037-2-jose.souza@intel.com
intel_connector_needs_modeset() will be used outside of
intel_display.c in a future patch so it would only be necessary to
remove the state and add the prototype to the header file.
But while at it, I simplified the arguments and moved it to a better
place intel_atomic.c.
No behavior changes intended here.
v3:
- removed digital from exported version of intel_connector_needs_modeset
- rollback connector to drm type
v4:
- Renamed new_connector_state to new_conn_state
- Going back to drm_connector_state in
intel_encoders_update_prepare/complete as we also have
intel_tv_connector_state
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191223010654.67037-1-jose.souza@intel.com
For CCS formats, the current DRM core check for YUV semiplanar formats
doesn't work; use an i915 specific function for that.
v2: Fix checkpatch warnings.
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191221120543.22816-11-imre.deak@intel.com
Y planes program the offset and stride of the AUX plane, so make sure we
copy the required info for this into their plane state.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191221120543.22816-10-imre.deak@intel.com
During framebuffer creation, we pre-compute offsets for 90/270 plane
rotation. However, only Y and Yf modifiers support 90/270 rotation. So,
skip the calculations for other modifiers.
To keep the gem buffer size check still working for tiled planes, factor
out the logic needed for rotation setup and skip only this part for
tiled planes other than Y/Yf.
v2: Add a bounds check WARN for the rotation info array.
v3: Keep the gem buffer size check working for tiled planes.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191221120543.22816-9-imre.deak@intel.com
The CCS plane stride must be fixed on TGL, as it's not configurable for
the display. Instead the HW has a hardwired logic to determine it from
the main plane stride. Make sure userspace passes in the correct stride.
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191221120543.22816-8-imre.deak@intel.com
Gen-12 display decompression operates on Y-tiled compressed main surface.
The CCS is linear and has 4 bits of metadata for each main surface cache
line pair, a size ratio of 1:256. Gen-12 display decompression is
incompatible with buffers compressed by earlier GPUs, so make use of a new
modifier to identify gen-12 compression. Another notable change is that
render decompression is supported on all planes except cursor and on all
pipes. Start by adding render decompression support for [A,X]BGR888 pixel
formats.
v2: Fix checkpatch warnings (Lucas)
v3:
Rebase, disable color clear, styling changes and modify
intel_tile_width_bytes and intel_tile_height to handle linear CCS
v4:
- Use format block descriptors and the i915 specific func to get the
subsampling for each color plane.
- Use helpers to convert between CCS and main planes.
v5:
- Fix subsampling returned by intel_fb_plane_get_subsampling() for
the CCS plane of the first plane.
v6:
- Rebased on v2 of patch 4.
v7:
- Fix plane dimensions during FB check.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Nanley G Chery <nanley.g.chery@intel.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> (v6)
Link: https://patchwork.freedesktop.org/patch/msgid/20191221120543.22816-7-imre.deak@intel.com
Using helpers instead of open coding this to select a CCS plane for a
main plane makes the code cleaner and less error-prone when the location
of CCS plane can be different based on the format (packed vs. YUV
semiplanar). The same applies to selecting an AUX plane which can be a
UV plane (for an uncompressed YUV semiplanar format), or a CCS plane.
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191221120543.22816-5-imre.deak@intel.com
intel_fill_fb_info() has grown quite large and wrapping the offset checks
into a separate function makes the loop a bit easier to follow.
v2: Skip the check for non-CCS planes. (Mika)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191221120543.22816-4-imre.deak@intel.com
Easier to read if all the alignment changes are in one place and contained
within a function.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191221120543.22816-3-imre.deak@intel.com
intel_tile_dims() computes tile height using size and width, when there
is already a function to do just that - intel_tile_height()
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191221120543.22816-2-imre.deak@intel.com
The power domain covers VDSC for DSI transcoder on ICL, and it's
pedantically about pipe, not transcoder, on TGL.
Reported-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191219133845.9333-1-jani.nikula@intel.com
Begin pulling the GT setup underneath a single GT umbrella; let intel_gt
take ownership of its engines! As hinted, the complication is the
lifetime of the probed engine versus the active lifetime of the GT
backends. We need to detect the engine layout early and keep it until
the end so that we can sanitize state on takeover and release.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191222120752.1368352-1-chris@chris-wilson.co.uk
We have several places where we want to allocate a pristine
crtc state. Some of those currently call intel_crtc_state_reset()
to properly initialize all the non-zero defaults in the state, but
some places do not. Let's add intel_crtc_state_alloc() to do both
the alloc and the reset, and call that everywhere we need a fresh
crtc state.
v2: s/kzalloc/kmalloc/ since we memset() anyway (José)
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191219111430.17527-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
All the other display related tracepoints use intel_ instead
if i915_ as the prefix. Do the same for the pipe update
tracepoints so I don't always have to spend time looking for
them.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213133453.22152-6-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
I fumbled the conflict resolution a bit when applying the
fbc vblank wait w/a. Because of that we now call intel_fbc_pre_update()
twice. Remove the second redundant call.
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213133453.22152-2-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
icl and tgl are still affected by the modulo 4 PLANE_OFFSET.y
underrun issue. Reject such configurations on all gen9+ platforms.
Can be reproduced easily with the following sequence of
hardware poking:
while {
write FBC_CTL.enable=1
wait for vblank
write PLANE_OFFSET .x=0 .y=32
write PLANE_SURF
wait for vblank
# if PLANE_OFFSET.y is multiple of 4 the underrun won't happen
write PLANE_OFFSET .x=0 .y=31
write PLANE_SURF
wait for vblank
# extra vblank wait is required here presumably
# to get FBC into the proper state
wait for vblank
write FBC_CTL.enable=0
# underrun happens some time after FBC disable
wait for vblank
}
Both 8888 and 565 pixel formats and all tilinga formats
seem affected. Reproduced on KBL/GLK/ICL/TGL. BDW confirmed
not affected.
Closes: https://gitlab.freedesktop.org/drm/intel/issues/792
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213133453.22152-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Currently pointers to and from are not initialized and may contain
garbage values. This will cause uninitialized pointer reads in the
call to intel_frontbuffer_track and later checks to see if to and from
are null. Fix this by ensuring to and from are initialized to NULL.
Addresses-Coverity: ("Uninitialised pointer read)"
Fixes: da42104f58 ("drm/i915: Hold reference to intel_frontbuffer as we track activity")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191219190916.24693-1-colin.king@canonical.com
Fix several issues with DSC power domains that did not take DSI
transcoders into account:
- On TGL+ we need to use PW2 for DSC on pipe A, not transcoder A. There
is no longer an eDP transcoder, but there are two DSI transcoders
which may be connected to pipe A.
- On TGL+ we need to use the pipe, not transcoder, power domains for DSC
on pipes other than A. Again, there are DSI transcoders.
- On ICL we need to use PW2 for DSC also for DSI transcoders, not just
for the eDP transcoder.
Using is_pipe_dsc() also adds the warning about ICL pipe A DSC, which
does not exist.
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191212134728.18432-1-jani.nikula@intel.com
The check for cpu_transcoder != TRANSCODER_A is more magic than
necessary, and potentially misleading. Before TGL, DSC is supported on
pipe A if, and only if, it's used with eDP or DSI transcoders. No
functional changes.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f00e9d55ce20b256177222588780c660aa587cc3.1576081155.git.jani.nikula@intel.com
ICL eDP and DSI transcoders have a DSC engine separate from the
pipe. Abstract the register selection and fix it for ICL.
Add a warning for pipe A DSC on ICL; it does not exist.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/01bcddcdf397b1c8eb859ed18ebe023fb64383d9.1576081155.git.jani.nikula@intel.com
Move all of haswell_crtc_disable() into the encoder
.post_disable() hooks. Now we're left with just
calling the .disable() and .post_disable() hooks
back to back.
I chose to move the code into the .post_disable() hook instead
of the .disable() hook as most of the sequence is currently
implemented in the .post_disable() hook.
We should collapse it all down to just one hook and then the
encoders can drive the modeset sequence fully. But that may
need some further refactoring as we currently call the
ddi .post_disable() hook from mst code and we can't just
replace that with a call to the ddi .disable() hook.
Should also follow up with similar treatment for the enable
sequence but let's start here where it's easier.
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213195217.15168-5-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
To make life easier in the future let's pass the old crtc state
to intel_crtc_vblank_off() just like we already do for its
counterpart intel_crtc_vblank_on().
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213195217.15168-4-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
To make life easier in the future let's pass the old crtc state
to skylake_scaler_disable() just like we already do for
for its ancestor ironlake_pfit_disable().
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213195217.15168-3-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
HSW+ platforms call encoder .post_disable() and .post_pll_disable()
back to back. And since we don't even disable the PLL in between
let's just move everything into .post_disable().
intel_dp_mst does forward the .post_disable() call to intel_ddi at
the very end of its own .post_disable() hook, so this time MST
I shouldn't even break MST by accident.
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213195217.15168-2-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Remove the pointless vfunc detour for hsw_fdi_link_train()
and just call it directly. Also pass the encoder in so we
can nuke the silly encoder loop within.
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213195217.15168-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
For the sake of symmetry with the crtc stuff let's add
a helper to reset the plane state to sane default values.
For the moment this only gets caller from the plane init.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107142417.11107-5-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
We have a few places where we want to reset a crtc state to its
default values. Let's add a helper for that. We'll need the new
__drm_atomic_helper_crtc_state_reset() helper for this to allow
us to just reset the state itself without clobbering the
crtc->state pointer.
And while at it let's zero out the whole thing, except a few
choice member which we'll mark as "invalid". And thanks to this
we can now nuke intel_crtc_init_scalers().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107142417.11107-4-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
We already have alloc/free helpers for planes, add the same for
crtcs. The main benefit is we get to move all the annoying state
initialization out of the main crtc_init() flow.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107142417.11107-3-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Since obj->frontbuffer is no longer protected by the struct_mutex, as we
are processing the execbuf, it may be removed. Mark the
intel_frontbuffer as rcu protected, and so acquire a reference to
the struct as we track activity upon it.
Closes: https://gitlab.freedesktop.org/drm/intel/issues/827
Fixes: 8e7cb1799b ("drm/i915: Extract intel_frontbuffer active tracking")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: <stable@vger.kernel.org> # v5.4+
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191218104043.3539458-1-chris@chris-wilson.co.uk
UAPI Changes:
- Add support for DMA-BUF HEAPS.
Cross-subsystem Changes:
- mipi dsi definition updates, pulled into drm-intel as well.
- Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim.
- Remove support for dma-buf kmap/kunmap.
- Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well.
Core Changes:
- Small cleanups to ttm.
- Fix SCDC definition.
- Assorted cleanups to core.
- Add todo to remove load/unload hooks, and use generic fbdev emulation.
- Assorted documentation updates.
- Use blocking ww lock in ttm fault handler.
- Remove drm_fb_helper_fbdev_setup/teardown.
- Warning fixes with W=1 for atomic.
- Use drm_debug_enabled() instead of drm_debug flag testing in various drivers.
- Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted)
- Various kconfig indentation fixes in core and drivers.
- Fix freeing transactions in dp-mst correctly.
- Sean Paul is steping down as core maintainer. :-(
- Add lockdep annotations for atomic locks vs dma-resv.
- Prevent use-after-free for a bad job in drm_scheduler.
- Fill out all block sizes in the P01x and P210 definitions.
- Avoid division by zero in drm/rect, and fix bounds.
- Add drm/rect selftests.
- Add aspect ratio and alternate clocks for HDMI 4k modes.
- Add todo for drm_framebuffer_funcs and fb_create cleanup.
- Drop DRM_AUTH for prime import/export ioctls.
- Clear DP-MST payload id tables downstream when initializating.
- Fix for DSC throughput definition.
- Add extra FEC definitions.
- Fix fake offset in drm_gem_object_funs.mmap.
- Stop using encoder->bridge in core directly
- Handle bridge chaining slightly better.
- Add backlight support to drm/panel, and use it in many panel drivers.
- Increase max number of y420 modes from 128 to 256, as preparation to add the new modes.
Driver Changes:
- Small fixes all over.
- Fix documentation in vkms.
- Fix mmap_sem vs dma_resv in nouveau.
- Small cleanup in komeda.
- Add page flip support in gma500 for psb/cdv.
- Add ddc symlink in the connector sysfs directory for many drivers.
- Add support for analogic an6345, and fix small bugs in it.
- Add atomic modesetting support to ast.
- Fix radeon fault handler VMA race.
- Switch udl to use generic shmem helpers.
- Unconditional vblank handling for mcde.
- Miscellaneous fixes to mcde.
- Tweak debug output from komeda using debugfs.
- Add gamma and color transform support to komeda for DOU-IPS.
- Add support for sony acx424AKP panel.
- Various small cleanups to gma500.
- Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation.
- Add support for Logic PD Type 28 panel.
- Use drm_panel_* wrapper functions in exynos/tegra/msm.
- Add devicetree bindings for generic DSI panels.
- Don't include drm_pci.h directly in many drivers.
- Add support for begin/end_cpu_access in udmabuf.
- Stop using drm_get_pci_dev in gma500 and mga200.
- Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access.
- Add devfreq thermal support to panfrost.
- Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager.
- meson: Add support for OSD1 plane AFBC commit.
- Stop displaying garbage when toggling ast primary plane on/off.
- More cleanups and fixes to UDL.
- Add D32 suport to komeda.
- Remove globle copy of drm_dev in gma500.
- Add support for Boe Himax8279d MIPI-DSI LCD panel.
- Add support for ingenic JZ4770 panel.
- Small null pointer deference fix in ingenic.
- Remove support for the special tfp420 driver, as there is a generic way to do it.
-----BEGIN PGP SIGNATURE-----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=b15X
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2019-12-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.6:
UAPI Changes:
- Add support for DMA-BUF HEAPS.
Cross-subsystem Changes:
- mipi dsi definition updates, pulled into drm-intel as well.
- Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim.
- Remove support for dma-buf kmap/kunmap.
- Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well.
Core Changes:
- Small cleanups to ttm.
- Fix SCDC definition.
- Assorted cleanups to core.
- Add todo to remove load/unload hooks, and use generic fbdev emulation.
- Assorted documentation updates.
- Use blocking ww lock in ttm fault handler.
- Remove drm_fb_helper_fbdev_setup/teardown.
- Warning fixes with W=1 for atomic.
- Use drm_debug_enabled() instead of drm_debug flag testing in various drivers.
- Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted)
- Various kconfig indentation fixes in core and drivers.
- Fix freeing transactions in dp-mst correctly.
- Sean Paul is steping down as core maintainer. :-(
- Add lockdep annotations for atomic locks vs dma-resv.
- Prevent use-after-free for a bad job in drm_scheduler.
- Fill out all block sizes in the P01x and P210 definitions.
- Avoid division by zero in drm/rect, and fix bounds.
- Add drm/rect selftests.
- Add aspect ratio and alternate clocks for HDMI 4k modes.
- Add todo for drm_framebuffer_funcs and fb_create cleanup.
- Drop DRM_AUTH for prime import/export ioctls.
- Clear DP-MST payload id tables downstream when initializating.
- Fix for DSC throughput definition.
- Add extra FEC definitions.
- Fix fake offset in drm_gem_object_funs.mmap.
- Stop using encoder->bridge in core directly
- Handle bridge chaining slightly better.
- Add backlight support to drm/panel, and use it in many panel drivers.
- Increase max number of y420 modes from 128 to 256, as preparation to add the new modes.
Driver Changes:
- Small fixes all over.
- Fix documentation in vkms.
- Fix mmap_sem vs dma_resv in nouveau.
- Small cleanup in komeda.
- Add page flip support in gma500 for psb/cdv.
- Add ddc symlink in the connector sysfs directory for many drivers.
- Add support for analogic an6345, and fix small bugs in it.
- Add atomic modesetting support to ast.
- Fix radeon fault handler VMA race.
- Switch udl to use generic shmem helpers.
- Unconditional vblank handling for mcde.
- Miscellaneous fixes to mcde.
- Tweak debug output from komeda using debugfs.
- Add gamma and color transform support to komeda for DOU-IPS.
- Add support for sony acx424AKP panel.
- Various small cleanups to gma500.
- Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation.
- Add support for Logic PD Type 28 panel.
- Use drm_panel_* wrapper functions in exynos/tegra/msm.
- Add devicetree bindings for generic DSI panels.
- Don't include drm_pci.h directly in many drivers.
- Add support for begin/end_cpu_access in udmabuf.
- Stop using drm_get_pci_dev in gma500 and mga200.
- Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access.
- Add devfreq thermal support to panfrost.
- Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager.
- meson: Add support for OSD1 plane AFBC commit.
- Stop displaying garbage when toggling ast primary plane on/off.
- More cleanups and fixes to UDL.
- Add D32 suport to komeda.
- Remove globle copy of drm_dev in gma500.
- Add support for Boe Himax8279d MIPI-DSI LCD panel.
- Add support for ingenic JZ4770 panel.
- Small null pointer deference fix in ingenic.
- Remove support for the special tfp420 driver, as there is a generic way to do it.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ba73535a-9334-5302-2e1f-5208bd7390bd@linux.intel.com
At least Bay Trail (BYT) and Cherry Trail (CHT) devices can use 1 of 2
different PWM controllers for controlling the LCD's backlight brightness.
Either the one integrated into the PMIC or the one integrated into the
SoC (the 1st LPSS PWM controller).
So far in the LPSS code on BYT we have skipped registering the LPSS PWM
controller "pwm_backlight" lookup entry when a Crystal Cove PMIC is
present, assuming that in this case the PMIC PWM controller will be used.
On CHT we have been relying on only 1 of the 2 PWM controllers being
enabled in the DSDT at the same time; and always registered the lookup.
So far this has been working, but the correct way to determine which PWM
controller needs to be used is by checking a bit in the VBT table and
recently I've learned about 2 different BYT devices:
Point of View MOBII TAB-P800W
Acer Switch 10 SW5-012
Which use a Crystal Cove PMIC, yet the LCD is connected to the SoC/LPSS
PWM controller (and the VBT correctly indicates this), so here our old
heuristics fail.
This commit fixes using the wrong PWM controller on these devices by
calling pwm_get() for the right PWM controller based on the
VBT dsi.config.pwm_blc bit.
Note this is part of a series which contains 2 other patches which renames
the PWM lookup for the 1st SoC/LPSS PWM from "pwm_backlight" to
"pwm_pmic_backlight" and the PWM lookup for the Crystal Cove PMIC PWM
from "pwm_backlight" to "pwm_pmic_backlight".
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191216202906.1662893-4-hdegoede@redhat.com
According to both the old acpi_igd_opregion_spec_0.pdf and the newer
skl_opregion_rev0p5.pdf opregion specification documents, if a driver
handles hotplug events itself, it should set the opregion CHPD field to
1 to indicate this and the firmware should respond to this by no longer
sending ACPI 0x00 notification events on e.g. lid-state changes.
Specifically skl_opregion_rev0p5.pdf states thid in the documentation of
the CHPD word: "Re-enumeration trigger logic in System BIOS MUST be
disabled for all the Operating Systems supporting Hot-Plug
(e.g., Windows* Longhorn and above)." Note the MUST in there.
We ignore these notifications, so this should not be a problem but many
recent DSTDs seem to all have the same copy-pasted bug in the GNOT() AML
function which is used to send these notifications. Windows likely does not
hit this bug as it presumably correcty sets CHPD to 1.
Here is an example of the broken GNOT() method:
Method (GNOT, 2, NotSerialized)
{
...
CEVT = Arg0
CSTS = 0x03
If (((CHPD == Zero) && (Arg1 == Zero)))
{
If (((OSYS > 0x07D0) || (OSYS < 0x07D6)))
{
Notify (PCI0, Arg1)
}
Else
{
Notify (GFX0, Arg1)
}
}
...
Notice that the condition for the If is always true I believe that the
|| like needs to be an &&, but there is nothing we can do about this and
in my own DSDT archive 55 of the 93 DSDTs have this issue.
When the if is true the notification gets send to the PCI root instead
of only to the GFX0 device. This causes Linux to re-enumerate PCI devices
whenever the LID opens / closes, leading to unexpected messages in dmesg:
Suspend through lid close:
[ 313.598199] intel_atomisp2_pm 0000:00:03.0: Refused to change power state, currently in D3
[ 313.664453] intel_atomisp2_pm 0000:00:03.0: Refused to change power state, currently in D3
[ 313.737982] pci_bus 0000:01: Allocating resources
[ 313.738036] pcieport 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 313.738051] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 313.738111] pcieport 0000:00:1c.0: BAR 15: assigned [mem 0x91000000-0x911fffff 64bit pref]
[ 313.738128] pcieport 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
Resume:
[ 813.623894] pci 0000:00:03.0: [8086:22b8] type 00 class 0x048000
[ 813.623955] pci 0000:00:03.0: reg 0x10: [mem 0x00000000-0x003fffff]
[ 813.630477] pci 0000:00:03.0: BAR 0: assigned [mem 0x91c00000-0x91ffffff]
[ 854.579101] intel_atomisp2_pm 0000:00:03.0: Refused to change power state, currently in D3
And more importantly this re-enumeration races with suspend/resume causing
enumeration to not be complete when assert_isp_power_gated() from
drivers/gpu/drm/i915/display/intel_display_power.c runs. This causes
the !pci_dev_present(isp_ids) check in assert_isp_power_gated() to fail
making the condition for the WARN true, leading to:
[ 813.327886] ------------[ cut here ]------------
[ 813.327898] ISP not power gated
[ 813.328028] WARNING: CPU: 2 PID: 2317 at drivers/gpu/drm/i915/display/intel_display_power.c:4870 intel_display_print_error_state+0x2b98/0x3a80 [i915]
...
[ 813.328599] ---[ end trace f01e81b599596774 ]---
This commit fixes the unwanted ACPI notification on the PCI root device
by setting CHPD to 1, so that the broken if condition in the AML never
gets checked as notifications of type 0x00 are disabled altogether.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191212204828.191288-1-hdegoede@redhat.com
Commit 4d89adc7b5 ("drm/i915/display/dsi: Add support to pipe D")
added pipe D support for DSI, but failed to update the state readout.
Fixes: 4d89adc7b5 ("drm/i915/display/dsi: Add support to pipe D")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191211110844.2996-1-jani.nikula@intel.com
Just like in commit 523e0cc89b ("drm/i915/tgl: allow DVI/HDMI on port
A"), the port checks when reading the VBT can easily not match what the
platform really exposes. However here we only have some additional debug
messages that are not adding much value: in the previous debug message
we already print everything we know about the VBT.
Instead of keep fixing the possible port assignments according to the
platform, just nuke the additional messages.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191206190552.8818-1-lucas.demarchi@intel.com
Now that the combo PHY aux power well handlers are used exclusively on
Icelake, we can drop a bunch of the extra tests.
v2: Don't try to use intel_uncore_rmw for register updates yet; there's
pending display uncore patches that need to land first. (Lucas)
v3: Drop the combo phy assertion. It was backward before, but doesn't
seem terribly necessary. I'm keeping the IS_ICELAKE assertion
though since we often copy/paste/modify the power well tables when
defining new platforms and it's too easy to cargo cult the
ICL-specific handling to new platforms that shouldn't use it.
(Lucas)
v4: Fix build; forgot to commit all the changes. (CI)
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213010600.701315-1-matthew.d.roper@intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
The TGL workaround database no longer shows Wa #1178 (or anything
similar under different workaround names/numbers) so we should be able
to drop it. In fact Swati just discovered that applying this workaround
is the root cause of some power well enable failures we've been seeing
in CI (gitlab issue 498).
Once we stop applying this WA, TGL no longer utilizes any of the special
handling provided by icl_combo_phy_aux_power_well_ops so we can just
drop back to using the standard hsw-style power well ops instead.
v3: Drop now-unused _TGL_AUX_ANAOVRD1_C definition too. (Lucas)
Closes: https://gitlab.freedesktop.org/drm/intel/issues/498
Fixes: deea06b475 ("drm/i915/tgl: apply Display WA #1178 to fix type C dongles")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Swati Sharma <swati2.sharma@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213001511.678070-3-matthew.d.roper@intel.com
Outputs C and D on EHL are combo PHY outputs and thus should not be
using the same TC AUX power well handlers as ICL. And even though
icl_combo_phy_aux_power_well_ops works okay for EHL/JSL combo PHYs none
of its special handling is actually necessary for this platform:
* EHL/JSL don't actually need to program PORT_CL_DW12
* Display WA #1178 does not apply to EHL/JSL
Thus we can simply drop back to using our standard "hsw-style" power
well ops for EHL AUX power wells.
Bspec: 4301
Fixes: f722b8c1e2 ("drm/i915/ehl: All EHL ports are combo phys")
Cc: Jose Souza <jose.souza@intel.com>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213001511.678070-2-matthew.d.roper@intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
The "num_dtd" variable is the number of elements in the
generic_dtd->dtd[] array so the > needs to be >= to prevent reading one
element beyond the end of the array.
Fixes: 33ef6d4fd8 ("drm/i915/vbt: Handle generic DTD block")
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191212091130.zf2g53njf5u24wk6@kili.mountain
skl_commit_modeset_enables() is a bit of mess. Let's streamline
it by simply tracking which pipes still need to be updated.
As a bonus we get rid of the state->wm_results.dirty_pipes usage.
v2: Rebase due to port sync
Cc: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210144105.3239-2-ville.syrjala@linux.intel.com
In order to eliminate intel_pipe_to_cpu_transcoder() (and its
crtc->config usage) let's pass the cpu transcoder to
assert_pipe() so we don't have to do the pipe->cpu transcoder
lookup on HSW+.
On VLV/CHV this can get called during eDP init, which
happens before crtc->config->cpu_transcoder is even
populated. So currently we're always reading PIPECONF(A)
there even if we're trying to check the state of some
other pipe.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112163812.22075-4-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Let's start to eliminate intel_pipe_to_cpu_transcoder() so that
we can get rid of one more crtc->config usage (which we will want
to nuke as well).
In the case of assert_fdi_tx() we know that we're never
dealing with the EDP transcoder so we can simply replace
this with a cast.
v2: Fix poor English in comment
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112163812.22075-3-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Enable DSC for DSI, if specified in VBT.
This still lacks DSC aware get config implementation, and therefore
state checker will fail. Also mode valid is not there yet.
v5:
- add dsc get config call
v4:
- convert_rgb = true (Vandita)
- ignore max cdclock check (Vandita)
- rename pipe_config to crtc_state
v3:
- take compressed bpp into account
v2:
- Nuke conn_state->max_requested_bpc, it's not used on DSI
Bspec: 49263
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e0136299e03c582238523189f6951eeb08daed98.1575974743.git.jani.nikula@intel.com
When DSC is enabled, we need to adjust the horizontal timings to account
for the compressed (and therefore reduced) link speed.
The compressed frequency ratio simplifies down to the ratio between
compressed and non-compressed bpp.
Bspec: 49263
Suggested-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fecebdc2719dd0c78eaf8f4d3225bb185956d7db.1575974743.git.jani.nikula@intel.com
We'll be expanding afe_clk() to take DSC into account. Switch to using
it where DSC matters. Which is really everywhere that
intel_dsi_bitrate() is currently used in ICL DSI code.
The functional difference is that we round the result closest instead of
down.
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b6c52b320daa8aaa0d79618ce714170f8f04ff67.1575974743.git.jani.nikula@intel.com
Add basic hardware state readout for DSC, and check the most relevant
details in the state checker.
v2:
- check for DSC power before reading its state
- check if source supports DSC at all
As a side effect, this should also get the power domains for the enabled
DSC on takeover, and subsequently disable DSC if it's not needed.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3fb018cf9bd9a4c275aab389b6ec0f2a4e938bb9.1575974743.git.jani.nikula@intel.com
Move intel_dp_source_supports_dsc() from intel_dp.c as
intel_dsc_source_support() in intel_vdsc.c. The DSC source support is
more about DSC than about DP, and will be needed for DP independent
code.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6c9f646090913290fb00efd46a4332421bf95930.1575974743.git.jani.nikula@intel.com
Add DSI specific computation and transmission to display of PPS.
With hopes that this approach will work for both DP and DSI encoders.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/461db10b1f4d76625625a9f2b1e3d932fff42799.1575974743.git.jani.nikula@intel.com
Turns out future DSI specific parameters aren't workable with the
approach of having the encoder specific functions in intel_vdsc.c. Make
intel_dsc_compute_params() a helper that does the encoder independent
parts, and have encoder code call it. Move intel_dsc_dp_compute_params()
to intel_dp.c as intel_dp_dsc_compute_params().
No functional changes.
v2: Rename pipe_config to crtc_state while at it.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/620688ec302f7f49cc539c6c1653bfaf6092fce0.1575974743.git.jani.nikula@intel.com
Add function for retrieving the DSC data for an encoder.
Initially, this is DSI specific, as DP does not use VBT settings for DSC
at all. It's also not very pretty.
In the future we might have a pointer from encoder to the child device,
which would make the child device list query here so much more sensible.
v3:
- use crtc_state instead of pipe_config
- return true by default from intel_bios_get_dsc_params()
- expand the comment about rc_buffer_block_size and rc_buffer_size
v2:
- make more robust, debug log errors better
Bspec: 29885
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b895c349d964d70e4cad26f12a629ea1898bfcc2.1575974743.git.jani.nikula@intel.com
Check for child devices that specify compression, and store the device
specific compression parameters in the display device data struct for
later use. Warn if compression is requested but not available.
Use fairly rigid checks for compression data for starters. These can be
made more dynamic later.
Log about DSC presence in DDI port parse, though this is not universal
across platforms or port types (DSI).
v2: amended debug logging
Bspec: 29885
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/357d685ba047faf2285138c2f7014a8dee9a12b7.1575974743.git.jani.nikula@intel.com
Gen12 can improve bandwidth efficiency by pairing up memory requests
with similar addresses. We need to program the BW_BUDDY1 and BW_BUDDY2
registers according to the memory configuration during display
initialization to take advantage of this capability.
The magic numbers we program here feel like something that could
definitely change on future platforms, so let's use a table-based
programming scheme to make this easy to extend in the future.
v2:
- Add separate table for Wa_1409767108. (Stan)
- Reorder structure reduce size by a word. Page mask can still be up
to 28 bits (even though current values are small) so we should keep
it as a u32, but just using a u8 for DRAM type instead of the actual
enum type saves space. (Lucas, Ville)
- Rename function to tgl_bw_buddy_init() to be more precise about what
it does. (Lucas)
Bspec: 49189
Bspec: 49218
Bspec: 52890
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191205224848.76712-1-matthew.d.roper@intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
intel_hdcp_transcoder_config() is clobbering some globally visible
state in .compute_config(). That is a big no no as .compute_config()
is supposed to have no visible side effects when either the commit
fails or it's just a TEST_ONLY commit.
Inline this stuff into intel_hdcp_enable() so that the state only
gets modified when we actually commit the state to the hardware.
Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Fixes: 39e2df090c ("drm/i915/hdcp: update current transcoder into intel_hdcp")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191204180549.1267-2-ville.syrjala@linux.intel.com
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
(cherry picked from commit 67e1d5ed85)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
We're missing a workaround in the fbc code for all glk+ platforms
which can cause corruption around the top of the screen. So
enabling fbc by default is a bad idea. I'm not keen to backport
the w/a so let's start by disabling fbc by default on all glk+.
We'll lift the restriction once the w/a is in place.
Cc: stable@vger.kernel.org
Cc: Daniel Drake <drake@endlessm.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-2-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
(cherry picked from commit cd8c021b36)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
intel_hdcp_transcoder_config() is clobbering some globally visible
state in .compute_config(). That is a big no no as .compute_config()
is supposed to have no visible side effects when either the commit
fails or it's just a TEST_ONLY commit.
Inline this stuff into intel_hdcp_enable() so that the state only
gets modified when we actually commit the state to the hardware.
Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Fixes: 39e2df090c ("drm/i915/hdcp: update current transcoder into intel_hdcp")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191204180549.1267-2-ville.syrjala@linux.intel.com
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
The code assumes we can omit the cfb allocation once fbc
has been enabled once. That's nonsense. Let's try to
reallocate it if we need to.
The code is still a mess, but maybe this is enough to get
fbc going in some cases where it initially underallocates
the cfb and there's no full modeset to fix it up.
Cc: Daniel Drake <drake@endlessm.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-15-ville.syrjala@linux.intel.com
Tested-by: Daniel Drake <drake@endlessm.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Now that we have the glk+ w/a for back to back fbc disable + plane
update in place we can once more enable fbc on glk+ by default.
Cc: Daniel Drake <drake@endlessm.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-14-ville.syrjala@linux.intel.com
Tested-by: Daniel Drake <drake@endlessm.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
On glk+ the hardware gets confused if we disable FBC while
it's recompressing and we perform a plane update during the
same frame. The result is that top of the screen gets corrupted.
We can avoid that by giving the hardware enough time to finish
the FBC disable before we touch the plane registers. Ie. we need
an extra vblank wait after FBC disable.
v2: Don't do the vblank wait if we never activated FBC in hw
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191128150338.12490-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
The hardware automagically nukes the cfb on flip. We can use
that whenever the plane/crtc configuration doesn't change too
much. Let's hook that up.
We'll need this for glk+ since we need to introduce an extra
vblank wait after FBC disable. As we're currently disabling
FBC around all plane updates we'd slow them down by an extra
frame. Not a great user experience when your fps is always
capped at vrefres/2. With flip nuke we don't need the extra
vblank wait.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-12-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
i965gm no longer needs the fence for scanout so we should be
do what we do for ctg+ and only configure a fence for FBC
when we have one.
In theory this should do nothing atm on account of
intel_fbc_can_activate() requiring the fence, but since
we do this for g4x+ let's do it for i965gm as well. We
may want to relax the requirements at some point and allow
FBC without a fence.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-9-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Precompute the override cfb stride value so that we can check
it when determining if flip nuke can be used or not.
The hardware has 13 bits for this, so we can shrink the storage
to u16 while at it.
v2: Don't explode when crtc_state->enable_fbc lies to us
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-6-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
We don't want to use the FBC hardware render tracking so let's not
enable it. To use the hw tracking properly we'd anyway need to
integrate this into the command submissing path as the register is
context saved, and if rendering happens via the ppgtt we'd have
to configure it with the ppgtt address instead of the ggtt address.
Easier to use software tracking instead.
Note that on pre-ilk we can't actually disable render tracking.
However we can't rely on it because it requires that DSPSURF to
match the render target address, and since we play tricks
with DSPSURF that may not be the case. Hence we shall rely on
software render tracking on all platforms.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-5-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
We're missing a workaround in the fbc code for all glk+ platforms
which can cause corruption around the top of the screen. So
enabling fbc by default is a bad idea. I'm not keen to backport
the w/a so let's start by disabling fbc by default on all glk+.
We'll lift the restriction once the w/a is in place.
Cc: stable@vger.kernel.org
Cc: Daniel Drake <drake@endlessm.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-2-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Commit 9c722e17c1 ("drm/i915: Disable pipes in reverse order")
reverted the order that pipes gets disabled because of TGL
master/slave relationship between transcoders in MST mode.
But as stated in a comment in skl_commit_modeset_enables() the
enabling order is not always crescent, possibly causing previously
selected slave transcoder being enabled before master so another
approach will be needed to select a transcoder to master in MST mode.
It will be similar to the approach taken in port sync.
But instead of implement something like
intel_trans_port_sync_modeset_disables() to MST lets simply it and
iterate over all pipes 2 times, the first one disabling any slave and
then disabling everything else.
The MST bits will be added in another patch.
v2:
Not using crtc->active as it is deprecated
v3:
Removing is_trans_port_sync_mode() check, just check for
is_trans_port_sync_master() is enough
v4:
Adding and using is_trans_port_sync_slave(), otherwise non-port sync
pipes will be disabled in the first loop, what is not wrong but is
not what patch description promises
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v2)
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191205210350.96795-3-jose.souza@intel.com
For TGL the step to turn off the transcoder clock was moved to after
the complete shutdown of DDI. Only the MST slave transcoders should
disable the clock before that.
v2:
- Adding last_mst_stream to intel_mst_post_disable_dp, make code more
easy to read and is similar to first_mst_stream in
intel_mst_pre_enable_dp()(Ville's idea)
- Calling intel_ddi_disable_pipe_clock() for GEN12+ right
intel_disable_ddi_buf() as stated in BSpec(Ville)
BSpec: 49190
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191205210350.96795-2-jose.souza@intel.com
It should not care about DDB allocations of pipes going through
a fullmodeset, as at this point those pipes are disabled.
The comment in the code also points to that but that was not what
was being executed.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191205210350.96795-1-jose.souza@intel.com
msm-next:
- OCMEM support for a3xx and a4xx GPUs.
- a510 support + display support
core:
- mst payload deletion fix
i915:
- uapi alignment fix
- fix for power usage regression due to security fixes
- change default preemption timeout to 640ms from 100ms
- EHL voltage level display fixes
- TGL DGL PHY fix
- gvt - MI_ATOMIC cmd parser fix, CFL non-priv warning
- CI spotted deadlock fix
- EHL port D programming fix
amdgpu:
- VRAM lost fixes on BACO for CI/VI
- navi14 DC fixes
- misc SR-IOV, gfx10 fixes
- XGMI fixes for arcturus
- SRIOV fixes
amdkfd:
- KFD on ppc64le enabled
- page table optimisations
radeon:
- fix for r1xx/2xx register checker.
tegra:
- displayport regression fixes
- DMA API regression fixes
mgag200:
- fix devices that can't scanout except at 0 addr
omap:
- fix dma_addr refcounting
-----BEGIN PGP SIGNATURE-----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=3cs2
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2019-12-06' of git://anongit.freedesktop.org/drm/drm
Pull more drm updates from Dave Airlie:
"Rob pointed out I missed his pull request for msm-next, it's been in
next for a while outside of my tree so shouldn't cause any unexpected
issues, it has some OCMEM support in drivers/soc that is acked by
other maintainers as it's outside my tree.
Otherwise it's a usual fixes pull, i915, amdgpu, the main ones, with
some tegra, omap, mgag200 and one core fix.
Summary:
msm-next:
- OCMEM support for a3xx and a4xx GPUs.
- a510 support + display support
core:
- mst payload deletion fix
i915:
- uapi alignment fix
- fix for power usage regression due to security fixes
- change default preemption timeout to 640ms from 100ms
- EHL voltage level display fixes
- TGL DGL PHY fix
- gvt - MI_ATOMIC cmd parser fix, CFL non-priv warning
- CI spotted deadlock fix
- EHL port D programming fix
amdgpu:
- VRAM lost fixes on BACO for CI/VI
- navi14 DC fixes
- misc SR-IOV, gfx10 fixes
- XGMI fixes for arcturus
- SRIOV fixes
amdkfd:
- KFD on ppc64le enabled
- page table optimisations
radeon:
- fix for r1xx/2xx register checker.
tegra:
- displayport regression fixes
- DMA API regression fixes
mgag200:
- fix devices that can't scanout except at 0 addr
omap:
- fix dma_addr refcounting"
* tag 'drm-next-2019-12-06' of git://anongit.freedesktop.org/drm/drm: (100 commits)
drm/dp_mst: Correct the bug in drm_dp_update_payload_part1()
drm/omap: fix dma_addr refcounting
drm/tegra: Run hub cleanup on ->remove()
drm/tegra: sor: Make the +5V HDMI supply optional
drm/tegra: Silence expected errors on IOMMU attach
drm/tegra: vic: Export module device table
drm/tegra: sor: Implement system suspend/resume
drm/tegra: Use proper IOVA address for cursor image
drm/tegra: gem: Remove premature import restrictions
drm/tegra: gem: Properly pin imported buffers
drm/tegra: hub: Remove bogus connection mutex check
ia64: agp: Replace empty define with do while
agp: Add bridge parameter documentation
agp: remove unused variable num_segments
agp: move AGPGART_MINOR to include/linux/miscdevice.h
agp: remove unused variable size in agp_generic_create_gatt_table
drm/dp_mst: Fix build on systems with STACKTRACE_SUPPORT=n
drm/radeon: fix r1xx/r2xx register checker for POT textures
drm/amdgpu: fix GFX10 missing CSIB set(v3)
drm/amdgpu: should stop GFX ring in hw_fini
...
Assuming intel_crtc_arm_fifo_underrun() only gets called when
there's no pending plane updates we can utilize it on gen2 by
checking the active_planes bitmask so that we only re-enable
underrun reporting if some planes are active.
i915_fifo_underrun_reset_write() seems to have the necessary
hw_done/flip_done waits in place.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127190556.1574-8-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Let's just inline intel_pre_disable_primary_noatomic() into
intel_plane_disable_noatomic(). The CxSR disable we can do
regardless of which plane we're disabling, and while at it we can
make the gen2 underrun w/a accurate by consulting the active_planes
bitmask.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127190556.1574-7-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
We have the active_planes bitmask now so use it to properly
determine when some planes are visible for the gen2 underrun
workaround.
This let's us almost eliminate intel_post_enable_primary().
The manual underrun checks we can simply move into
intel_atomic_commit_tail() since they loop over all the pipes
already. No point in repeating the checks multiple times when
there are multiple pipes in the commit.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127190556.1574-6-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Change the calling convention to just pass the state+crtc and
switch to intel_ types throughout.
We'll also do a quick s/if (old_primary_state)/if (new_primary_state)/
so that we'll be able to eliminate old_primary_state later. This
is fine since we always have either both old and new state or neither.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127190556.1574-5-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Disabling pipe/transcoder clock before power down sink could cause
sink lost signal, causing it to trigger a hotplug to notify source
that link signal was lost.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191202222513.337777-2-jose.souza@intel.com
If the CRTC is going from enabled to disabled and it is a port sync
slave, it needs to check to the old state to be disabled before the
port sync master.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191202222513.337777-1-jose.souza@intel.com
When looking at SDEISR to determine the connection status of combo
outputs, we should use the phy index rather than the port index.
Although they're usually the same thing, EHL's DDI-D (port D) is
attached to PHY-A and SDEISR doesn't even have bits for a "D" output.
It's also possible that future platforms may map DDIs (the internal
display engine programming units) to PHYs (the output handling on the IO
side) in ways where port!=phy, so let's look at the PHY index by
default.
v2: Rename to intel_combo_phy_connected. (Lucas)
Fixes: 719d240026 ("drm/i915/ehl: Enable DDI-D")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127221314.575575-2-matthew.d.roper@intel.com
(cherry picked from commit 3d1e388d40)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The unaligned ioread32() will make us read byte by byte looking for the
vbt. We could just as well have done a ioread8() + a shift and avoid the
extra confusion on how we are looking for "$VBT".
However when using ACPI it's guaranteed the VBT is 4-byte aligned
per spec, so we can probably assume it here as well.
v2: do not try to simplify the loop by eliminating the auxiliary counter
(Jani and Ville)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191126225110.8127-4-lucas.demarchi@intel.com
We don't need to keep the pci rom mapped during the entire
intel_bios_init() anymore. Move it to the previous copy_vbt() function
and rename it to oprom_get_vbt() since now it's responsible to to all
operations related to get the vbt from the oprom.
v2: fix double __iomem attribute detected by sparse
v3: fix missing unmap on success (Ville)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191126225110.8127-3-lucas.demarchi@intel.com
When we map the VBT through pci_map_rom() we may not be allowed
to simply discard the address space and go on reading the memory.
That doesn't work on my test system, but by dumping the rom via
sysfs I can can get the correct vbt. So change our find_vbt() to do
the same as done by pci_read_rom(), i.e. use memcpy_fromio().
v2: the just the minimal changes by not bothering with the unaligned io
reads: this can be done on top (from Ville and Jani)
v3: drop const in function return since now we are copying the vbt,
rather than just finding it
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191126225110.8127-2-lucas.demarchi@intel.com
From VBT 228+ this is block that PSR and other power saving
features configuration should be read from.
v3:
Using DRRS from this new block
v4:
Using BIT()
Fixing DRRS comment in parse_power_conservation_features()
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191128014852.214135-5-jose.souza@intel.com
eDP specification states that sink can have its PSR capability
changed, I have never found any panel doing that but lets add that
for completeness.
For now it is not reading back the PSR capabilities and if possible
re-enabling PSR, this will be added if a panel is found using this
feature.
v4:
Cleaning DP_PSR_CAPS_CHANGE
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191128014852.214135-4-jose.souza@intel.com
When this error happens sink link is not stable after the required
FW_EXIT_LATENCY period so it will miss the selective update.
As the other PSR errors, for now we are not trying to recover from
it.
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191128014852.214135-3-jose.souza@intel.com
eDP spec states that when sink enconters a problem that prevents it
to keep PSR running it should set PSR status to internal error and
set the reason why it happen to PSR_ERROR_STATUS but it is not how it
was implemented.
But also I don't want to change this behavior, who knows if there is
a panel out there that only set the PSR_ERROR_STATUS.
So here refactoring the code a bit to make more easy to read what was
state above as more checks will be added to this function.
v2:
returning a int instead of a bool in psr_get_status_and_error_status()
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191128014852.214135-2-jose.souza@intel.com
PSR2 HW only support a limited number of bits per pixel, if mode has
more than supported PSR2 should not be enabled.
BSpec: 50422
BSpec: 7713
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191128014852.214135-1-jose.souza@intel.com
The "err" label is not really "err", but rather "out" since the return
path is shared between error condition and normal path. This broke when
commit 03cea61076 ("drm/i915/dsb: fix extra warning on error path
handling") added a "dsb->cmd_buf = NULL;" there, making DSB to stop
working since now all writes would pass-through via mmio.
Remove the set to NULL since it's actually not needed: we only set it if
all steps are successful. While at it, rename the label so this confusion
doesn't happen again.
Fixes: 03cea61076 ("drm/i915/dsb: fix extra warning on error path handling")
Resolves: https://gitlab.freedesktop.org/drm/intel/issues/8
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127221119.384754-1-lucas.demarchi@intel.com
When looking at SDEISR to determine the connection status of combo
outputs, we should use the phy index rather than the port index.
Although they're usually the same thing, EHL's DDI-D (port D) is
attached to PHY-A and SDEISR doesn't even have bits for a "D" output.
It's also possible that future platforms may map DDIs (the internal
display engine programming units) to PHYs (the output handling on the IO
side) in ways where port!=phy, so let's look at the PHY index by
default.
v2: Rename to intel_combo_phy_connected. (Lucas)
Fixes: 719d240026 ("drm/i915/ehl: Enable DDI-D")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127221314.575575-2-matthew.d.roper@intel.com
The South Display is part of the PCH so we should technically be basing
our port detection logic off the PCH in use rather than the platform
generation.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127221314.575575-1-matthew.d.roper@intel.com
LPT/WPT only have PCH transcoder A. Make sure we poke at its
chicken register instead of some non-existent register when
FDI is being driven by pipe B or C.
Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191128182358.14477-1-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
-----BEGIN PGP SIGNATURE-----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=Hj7G
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2019-11-27' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Lots of stuff in here, though it hasn't been too insane this merge
apart from dealing with the security fun.
uapi:
- export different colorspace properties on DP vs HDMI
- new fourcc for ARM 16x16 block format
- syncobj: allow querying last submitted timeline value
- DRM_FORMAT_BIG_ENDIAN defined as unsigned
core:
- allow using gem vma manager in ttm
- connector/encoder/bridge doc fixes
- allow more than 3 encoders for a connector
- displayport mst suspend/resume reprobing support
- vram lazy unmapping, uniform vram mm and gem vram
- edid cleanups + AVI informframe bar info
- displayport helpers - dpcd parser added
dp_cec:
- Allow a connector to be associated with a cec device
ttm:
- pipelining with no_gpu_wait fix
- always keep BOs on the LRU
sched:
- allow free_job routine to sleep
i915:
- Block userptr from mappable GTT
- i915 perf uapi versioning
- OA stream dynamic reconfiguration
- make context persistence optional
- introduce DRM_I915_UNSTABLE Kconfig
- add fake lmem testing under unstable
- BT.2020 support for DP MSA
- struct mutex elimination
- Tigerlake display/PLL/power management improvements
- Jasper Lake PCH support
- refactor PMU for multiple GPUs
- Icelake firmware update
- Split out vga + switcheroo code
amdgpu:
- implement dma-buf import/export without helpers
- vega20 RAS enablement
- DC i2c over aux fixes
- renoir GPU reset
- DC HDCP support
- BACO support for CI/VI asics
- MSI-X support
- Arcturus EEPROM support
- Arcturus VCN encode support
- VCN dynamic powergating on RV/RV2
amdkfd:
- add navi12/14/renoir support to kfd
radeon:
- SI dpm fix ported from amdgpu
- fix bad DMA on ppc platforms
gma500:
- memory leak fixes
qxl:
- convert to new gem mmap
exynos:
- build warning fix
komeda:
- add aclk sysfs attribute
v3d:
- userspace cleanup uapi change
i810:
- fix for underflow in dispatch ioctls
ast:
- refactor show_cursor
mgag200:
- refactor show_cursor
arcgpu:
- encoder finding improvements
mediatek:
- mipi_tx, dsi and partial crtc support for MT8183 SoC
- rotation support
meson:
- add suspend/resume support
omap:
- misc refactors
tegra:
- DisplayPort support for Tegra 210, 186 and 194.
- IOMMU-backed DMA API fixes
panfrost:
- fix lockdep issue
- simplify devfreq integration
rcar-du:
- R8A774B1 SoC support
- fixes for H2 ES2.0
sun4i:
- vcc-dsi regulator support
virtio-gpu:
- vmexit vs spinlock fix
- move to gem shmem helpers
- handle large command buffers with cma"
* tag 'drm-next-2019-11-27' of git://anongit.freedesktop.org/drm/drm: (1855 commits)
drm/amdgpu: invalidate mmhub semaphore workaround in gmc9/gmc10
drm/amdgpu: initialize vm_inv_eng0_sem for gfxhub and mmhub
drm/amd/amdgpu/sriov skip RLCG s/r list for arcturus VF.
drm/amd/amdgpu/sriov temporarily skip ras,dtm,hdcp for arcturus VF
drm/amdgpu/gfx10: re-init clear state buffer after gpu reset
merge fix for "ftrace: Rework event_create_dir()"
drm/amdgpu: Update Arcturus golden registers
drm/amdgpu/gfx10: fix out-of-bound mqd_backup array access
drm/amdgpu/gfx10: explicitly wait for cp idle after halt/unhalt
Revert "drm/amd/display: enable S/G for RAVEN chip"
drm/amdgpu: disable gfxoff on original raven
drm/amdgpu: remove experimental flag for Navi14
drm/amdgpu: disable gfxoff when using register read interface
drm/amdgpu/powerplay: properly set PP_GFXOFF_MASK (v2)
drm/amdgpu: fix bad DMA from INTERRUPT_CNTL2
drm/radeon: fix bad DMA from INTERRUPT_CNTL2
drm/amd/display: Fix debugfs on MST connectors
drm/amdgpu/nv: add asic func for fetching vbios from rom directly
drm/amdgpu: put flush_delayed_work at first
drm/amdgpu/vcn2.5: fix the enc loop with hw fini
...
Starting with gen12, PORT_A can be connected to a transcoder
with audio support. Modify the existing logic that disabled
audio on PORT_A unconditionally.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191125125313.17584-1-kai.vehmanen@linux.intel.com
According to BSpec 53998, there is a mask of
max 8 SAGV/QGV points we need to support.
Bumping this up to keep the CI happy(currently
preventing tests to run), until all SAGV
changes land.
v2: Fix second plane where QGV points were
hardcoded as well.
v3: Change the naming of I915_NUM_SAGV_POINTS
to be I915_NUM_QGV_POINTS, as more meaningful
(Ville Syrjälä)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112189
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191125160800.14740-1-stanislav.lisovskiy@intel.com
[vsyrjala: Add missing braces around else (checkpatch), fix Bugzilla tag]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
The bspec initially provided a single DKL PHY vswing table for both HDMI
and DP, but was recently updated to include an independent table for
HDMI.
Bspec: 49292
Fixes: 978c3e539b ("drm/i915/tgl: Add dkl phy programming sequences")
Cc: Clinton A Taylor <clinton.a.taylor@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191118180219.9309-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit 362bfb995b)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The bspec was recently updated with new cdclk -> voltage level tables to
accommodate the new 324/326.4 cdclk values.
Bspec: 21809
Fixes: 63c9dae71d ("drm/i915/ehl: Add voltage level requirement table")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191118164412.26216-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit d147483884)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
fbdev uses the physical address of our framebuffer for its fb_mmap()
routine. While we need to adapt this address for the new io BAR, we have
to fix v5.4 first! The simplest fix is to restore the smem back to v5.3
and we will then probably have to implement our fbops->fb_mmap() callback
to handle local memory.
Reported-by: Neil MacLeod <freedesktop@nmacleod.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112256
Fixes: 5f889b9a61 ("drm/i915: Disregard drm_mode_config.fb_base")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Tested-by: Neil MacLeod <freedesktop@nmacleod.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191113180633.3947-1-chris@chris-wilson.co.uk
(cherry picked from commit abc5520704)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit 9faf5fa4d3)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Move the assert_vblank_disabled() into intel_crtc_vblank_on()
so that we don't have to inline it all over.
This does mean we now assert_vblank_disabled() during readout as well
but that is totally fine as it happens after drm_crtc_vblank_reset().
One can even argue it's what we want to do anyway to make sure
the reset actually happened.
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191118164430.27265-4-ville.syrjala@linux.intel.com
Just pass the atomic state and the crtc to intel_encoders_enable() & co.
Make life simpler when you don't have to think which state (old vs. new)
you have to pass in. Also constify the states while at it.
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191118164430.27265-2-ville.syrjala@linux.intel.com
The bspec initially provided a single DKL PHY vswing table for both HDMI
and DP, but was recently updated to include an independent table for
HDMI.
Bspec: 49292
Fixes: 978c3e539b ("drm/i915/tgl: Add dkl phy programming sequences")
Cc: Clinton A Taylor <clinton.a.taylor@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191118180219.9309-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
The bspec was recently updated with new cdclk -> voltage level tables to
accommodate the new 324/326.4 cdclk values.
Bspec: 21809
Fixes: 63c9dae71d ("drm/i915/ehl: Add voltage level requirement table")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191118164412.26216-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
When we call intel_dsb_get(), the dsb initialization may fail for
various reasons. We already log the error message in that path, making
it unnecessary to trigger a warning that refcount == 0 when calling
intel_dsb_put().
So here we simplify the logic and do lazy shutdown: leaving the extra
refcount alive so when we call intel_dsb_put() we end up calling
i915_vma_unpin_and_release().
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191111205024.22853-3-lucas.demarchi@intel.com
The current dsb API is not really prepared to handle multithread access.
I was debugging an issue that ended up fixed by commit a096883dda
("drm/i915/dsb: Remove PIN_MAPPABLE from the DSB object VMA") and was
puzzled how these atomic operations were guaranteeing atomicity.
if (atomic_add_return(1, &dsb->refcount) != 1)
return dsb;
Thread A could still be initializing dsb struct (and even fail in the
middle) while thread B would take a reference and use it (even
derefencing a NULL cmd_buf).
I don't think the atomic operations here will help much if this were
to support multithreaded scenario in future, so just remove them to
avoid confusion.
v2: Use refcount++ != 0 instead of ++refcount != 1 (from Ville)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191111205024.22853-2-lucas.demarchi@intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20191116011539.18230-1-lucas.demarchi@intel.com
The LUTs are single buffered so in order to program them without
tearing we'd have to do it during vblank (actually to be 100%
effective it has to happen between start of vblank and frame start).
We have no proper mechanism for that at the moment so we just
defer loading them after the vblank waits have happened. That
is not quite sufficient (especially when committing multiple pipes
whose vblanks don't line up) so the LUT load will often leak into
the following frame causing tearing.
However in case the hardware wasn't previously using the LUT we
can preload it before setting the enable bit (which is double
buffered so won't tear). Let's determine if we can do such
preloading and make it happen. Slight variation between the
hardware requires some platforms specifics in the checks.
Hans is seeing ugly colored flash on VLV/CHV macchines (GPD win
and Asus T100HA) when the gamma LUT gets loaded for the first
time as the BIOS has left some junk in the LUT memory.
v2: Deal with uapi vs. hw crtc state split
s/GCM/CGM/ typo fix
Cc: Hans de Goede <hdegoede@redhat.com>
Fixes: 051a6d8d3c ("drm/i915: Move LUT programming to happen after vblank waits")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191030190815.7359-1-ville.syrjala@linux.intel.com
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
(cherry picked from commit 0ccc42a2fd)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit f77021372e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Make sure we have a crtc before probing its primary plane's
max stride. Initially I thought we can't get this far without
crtcs, but looks like we can via the dumb_create ioctl.
Not sure if we shouldn't disable dumb buffer support entirely
when we have no crtcs, but that would require some amount of work
as the only thing currently being checked is dev->driver->dumb_create
which we'd have to convert to some device specific dynamic thing.
Cc: stable@vger.kernel.org
Reported-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Fixes: aa5ca8b742 ("drm/i915: Align dumb buffer stride to 4k to allow for gtt remapping")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106172349.11987-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit baea9ffe64)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit aeec766133)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
VBT revision 229 adds a new "Generic DTD" block 58 and deprecates the
old LFP panel mode data in block 42. Let's start parsing this block to
fill in the panel fixed mode on devices with a >=229 VBT.
v2:
* Update according to the recent updates:
- DTD size is now 16 bits instead of 24
- polarity is now just a single bit for hsync and vsync and is
properly documented
* Minor checkpatch fix
v3:
* Now that panel options are parsed separately from the previous patch,
move generic DTD parsing into a function parallel to
parse_lfp_panel_dtd. We'll still fall back to looking at the legacy
LVDS timing block if the generic DTD fails. (Jani)
* Don't forget to actually set lfp_lvds_vbt_mode! (Jani)
* Drop "bdb_" prefix from dtd entry structure. (Jani)
* Follow C99 standard for structure's flexible array member. (Jani)
v4:
* Add "positive" to polarity field names for clarity. (Jani)
* Move VBT version check and fallback to legacy DTD parsing logic to a
helper to keep top-level VBT parsing uncluttered. (Jani)
* Restructure reserved bit packing at end of generic_dtd_entry from
"u32 rsvd:24" to "u8 rsvd[3]" to prevent copy/paste mistakes in the
future. (Jani)
Bspec: 54751
Bspec: 20148
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191115165132.9472-3-matthew.d.roper@intel.com
Newer VBT versions will add an alternate way to read panel DTD
information, so let's split parsing of the general panel information
from the timing data in preparation.
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jesse Barnes <jsbarnes@google.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191115165132.9472-2-matthew.d.roper@intel.com
It's supposed to be just a const pointer.
Fixes: 074c77e3ec ("drm/i915/tgl: Gen-12 display loses Yf tiling and legacy CCS support")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191115120440.17883-1-jani.nikula@intel.com
(cherry picked from commit 48ea97fabe)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
fbdev uses the physical address of our framebuffer for its fb_mmap()
routine. While we need to adapt this address for the new io BAR, we have
to fix v5.4 first! The simplest fix is to restore the smem back to v5.3
and we will then probably have to implement our fbops->fb_mmap() callback
to handle local memory.
Reported-by: Neil MacLeod <freedesktop@nmacleod.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112256
Fixes: 5f889b9a61 ("drm/i915: Disregard drm_mode_config.fb_base")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Tested-by: Neil MacLeod <freedesktop@nmacleod.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191113180633.3947-1-chris@chris-wilson.co.uk
(cherry picked from commit abc5520704)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
It's supposed to be just a const pointer.
Fixes: 074c77e3ec ("drm/i915/tgl: Gen-12 display loses Yf tiling and legacy CCS support")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191115120440.17883-1-jani.nikula@intel.com
Currently we're blindly poking at the frame start delay bits
in PIPECONF when trying to sanitize the hardware state. Those
bits decided to move elsewhere on HSW, so on many platforms
we're not doing anything at all here. Also we're forgetting
about the PCH transcoder entirely.
Add all the bit definitions for the various homes these bits
have had throughout the years, and reset them all to zero.
However I'm not entirely sure this is a safe thing to do. If
not I guess we'd want full readout+statecheck for this stuff.
For now let's stick to the current logic and hope for the
best.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191024122138.25065-3-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Backmerge to get dfce90259d ("Backmerge i915 security patches from
commit 'ea0b163b13ff' into drm-next") and thus 100d46bd72 ("Merge
Intel Gen8/Gen9 graphics fixes from Jon Bloomfield.").
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
HDMI_PICTURE_ASPECT_NONE is zero and the connector state is kzalloc()'d
so no need to initialize conn_state->picture_aspect_ratio with it.
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190620142639.17518-6-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
HDMI_PICTURE_ASPECT_NONE means "Automatic" so when the user has that
selected we should keep whatever aspect ratio the mode already has.
Also no point in checking for connector->is_hdmi in the SDVO code
since we only attach the property to HDMI connectors.
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190620142639.17518-5-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
fbdev uses the physical address of our framebuffer for its fb_mmap()
routine. While we need to adapt this address for the new io BAR, we have
to fix v5.4 first! The simplest fix is to restore the smem back to v5.3
and we will then probably have to implement our fbops->fb_mmap() callback
to handle local memory.
Reported-by: Neil MacLeod <freedesktop@nmacleod.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112256
Fixes: 5f889b9a61 ("drm/i915: Disregard drm_mode_config.fb_base")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Tested-by: Neil MacLeod <freedesktop@nmacleod.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191113180633.3947-1-chris@chris-wilson.co.uk
Tiger Lake supports HDMI on port A. For other platforms we ignore what
the VBT says regarding HDMI to workaround broken VBTs, see
commit 2ba7d7e043 ("drm/i915/bios: ignore HDMI on port A"). Make this
apply gen12+ so they inherit the TGL behavior.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191113021935.41547-1-lucas.demarchi@intel.com
This register was being enabled after enable TRANS_DDI_FUNC_CTL and
PIPECONF/TRANS_CONF while BSpec states that it should be set when
enabling TRANS_DDI_FUNC_CTL.
BSpec: 49190
BSpec: 22243
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107214559.77087-3-jose.souza@intel.com
Adding pipe D support to DSI transcoder.
Not adding it for EDP transcoder code paths as only TGL has 4 pipes
and it do not have a EDP transcoder.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107214559.77087-2-jose.souza@intel.com
When we call intel_bios_is_valid_vbt(), size may not actually be the
size of the VBT, but rather the size of the blob the VBT is contained
in. For example, when mapping the PCI oprom, size will be the entire
oprom size. We don't want to read beyond what is reported to be the
VBT. So make sure we vbt->vbt_size makes sense and use that for
the latter checks.
v2: check for vbt_size after checking for vbt signature and give it a
more meaningful error message (from Jani)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191108003602.33526-3-lucas.demarchi@intel.com
The setting of MSA is done by the DDI .pre_enable() hook. And when we are
using MST, the MSA is only set to first mst stream by calling of
DDI .pre_eanble() hook. It raies issues to non-first mst streams.
Wrong MSA or missed MSA packets might show scrambled screen or wrong
screen.
This splits a setting of MSA to MST and SST cases. And In the MST case it
will call a setting of MSA after an allocating of Virtual Channel from
MST encoder pre_enable callback.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112212
Fixes: 0c06fa1560 ("drm/i915/dp: Add support of BT.2020 Colorimetry to DP MSA")
Fixes: d4a415dcda ("drm/i915: Fix MST oops due to MSA changes")
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106212636.502471-1-gwan-gyeong.mun@intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
[vsyrjala: nuke spurious newline]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit bd8c9cca88)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191113125241.20547-1-ville.syrjala@linux.intel.com
The warning should be just a warning. Where it is currently is wrong
since we already registered the connector on drm, meaning it dies later
on a NULL pointer deref if the VBT-overriding we have is removed. Move
the warning up.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191108214251.79305-1-lucas.demarchi@intel.com
Since CNP it's possible for rawclk to have two different values, 19.2
and 24 MHz. If the value indicated by SFUSE_STRAP register is different
from the power on default for PCH_RAWCLK_FREQ, we'll end up having a
mismatch between the rawclk hardware and software states after
suspend/resume. On previous platforms this used to work by accident,
because the power on defaults worked just fine.
Update the rawclk also on resume. The natural place to do this would be
intel_modeset_init_hw(), however VLV/CHV need it done before
intel_power_domains_init_hw(). Thus put it there even if it feels
slightly out of place.
v2: Call intel_update_rawclck() in intel_power_domains_init_hw() for all
platforms (Ville).
Reported-by: Shawn Lee <shawn.c.lee@intel.com>
Cc: Shawn Lee <shawn.c.lee@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Shawn Lee <shawn.c.lee@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191101142024.13877-1-jani.nikula@intel.com
(cherry picked from commit 59ed05ccdd)
Cc: <stable@vger.kernel.org> # v4.15+
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Using the array is getting clumsy. Make things a bit more dynamic.
Remove early returns on not having child devices when the end result
after "iterating" the empty list would be the same.
v3:
- use list_add_tail to not reverse the child device list (Ville)
v2:
- stick to previous naming of child devices (Ville)
- use kzalloc, handle failure
- initialize list head earlier to keep intel_bios_driver_remove() safe
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3e72da0b412354ed8be6719df55b0e0cc4caa61a.1573227240.git.jani.nikula@intel.com
The setting of MSA is done by the DDI .pre_enable() hook. And when we are
using MST, the MSA is only set to first mst stream by calling of
DDI .pre_eanble() hook. It raies issues to non-first mst streams.
Wrong MSA or missed MSA packets might show scrambled screen or wrong
screen.
This splits a setting of MSA to MST and SST cases. And In the MST case it
will call a setting of MSA after an allocating of Virtual Channel from
MST encoder pre_enable callback.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112212
Fixes: 0c06fa1560 ("drm/i915/dp: Add support of BT.2020 Colorimetry to DP MSA")
Fixes: d4a415dcda ("drm/i915: Fix MST oops due to MSA changes")
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106212636.502471-1-gwan-gyeong.mun@intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
[vsyrjala: nuke spurious newline]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
The LUTs are single buffered so in order to program them without
tearing we'd have to do it during vblank (actually to be 100%
effective it has to happen between start of vblank and frame start).
We have no proper mechanism for that at the moment so we just
defer loading them after the vblank waits have happened. That
is not quite sufficient (especially when committing multiple pipes
whose vblanks don't line up) so the LUT load will often leak into
the following frame causing tearing.
However in case the hardware wasn't previously using the LUT we
can preload it before setting the enable bit (which is double
buffered so won't tear). Let's determine if we can do such
preloading and make it happen. Slight variation between the
hardware requires some platforms specifics in the checks.
Hans is seeing ugly colored flash on VLV/CHV macchines (GPD win
and Asus T100HA) when the gamma LUT gets loaded for the first
time as the BIOS has left some junk in the LUT memory.
v2: Deal with uapi vs. hw crtc state split
s/GCM/CGM/ typo fix
Cc: Hans de Goede <hdegoede@redhat.com>
Fixes: 051a6d8d3c ("drm/i915: Move LUT programming to happen after vblank waits")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191030190815.7359-1-ville.syrjala@linux.intel.com
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
(cherry picked from commit 0ccc42a2fd)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Make sure we have a crtc before probing its primary plane's
max stride. Initially I thought we can't get this far without
crtcs, but looks like we can via the dumb_create ioctl.
Not sure if we shouldn't disable dumb buffer support entirely
when we have no crtcs, but that would require some amount of work
as the only thing currently being checked is dev->driver->dumb_create
which we'd have to convert to some device specific dynamic thing.
Cc: stable@vger.kernel.org
Reported-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Fixes: aa5ca8b742 ("drm/i915: Align dumb buffer stride to 4k to allow for gtt remapping")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106172349.11987-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit baea9ffe64)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The intel_dp_link_training.h include has no need or place in
intel_display.h. Include it in intel_display.c instead.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Fixes: eadf6f9170 ("drm/i915/display/icl: Enable master-slaves in trans port sync")
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191029103947.7535-1-jani.nikula@intel.com
(cherry picked from commit 3c954c418e)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Make sure we have a crtc before probing its primary plane's
max stride. Initially I thought we can't get this far without
crtcs, but looks like we can via the dumb_create ioctl.
Not sure if we shouldn't disable dumb buffer support entirely
when we have no crtcs, but that would require some amount of work
as the only thing currently being checked is dev->driver->dumb_create
which we'd have to convert to some device specific dynamic thing.
Cc: stable@vger.kernel.org
Reported-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Fixes: aa5ca8b742 ("drm/i915: Align dumb buffer stride to 4k to allow for gtt remapping")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106172349.11987-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Rather than just specifying the bullet numbers from the bspec (e.g.,
"4.b") actually include the description of what the bspec wants us to
do. Steps can be renumbered or moved so including the description will
help us match the code up to the spec. Plus if we add support for new
platforms, some of the steps may be added/removed so more descriptive
comments will be useful for ensuring all of the bspec requirements are
met.
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107174527.11165-1-matthew.d.roper@intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
The LUTs are single buffered so in order to program them without
tearing we'd have to do it during vblank (actually to be 100%
effective it has to happen between start of vblank and frame start).
We have no proper mechanism for that at the moment so we just
defer loading them after the vblank waits have happened. That
is not quite sufficient (especially when committing multiple pipes
whose vblanks don't line up) so the LUT load will often leak into
the following frame causing tearing.
However in case the hardware wasn't previously using the LUT we
can preload it before setting the enable bit (which is double
buffered so won't tear). Let's determine if we can do such
preloading and make it happen. Slight variation between the
hardware requires some platforms specifics in the checks.
Hans is seeing ugly colored flash on VLV/CHV macchines (GPD win
and Asus T100HA) when the gamma LUT gets loaded for the first
time as the BIOS has left some junk in the LUT memory.
v2: Deal with uapi vs. hw crtc state split
s/GCM/CGM/ typo fix
Cc: Hans de Goede <hdegoede@redhat.com>
Fixes: 051a6d8d3c ("drm/i915: Move LUT programming to happen after vblank waits")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191030190815.7359-1-ville.syrjala@linux.intel.com
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The intel_dp_link_training.h include has no need or place in
intel_display.h. Include it in intel_display.c instead.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Fixes: eadf6f9170 ("drm/i915/display/icl: Enable master-slaves in trans port sync")
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191029103947.7535-1-jani.nikula@intel.com
Prefer using intel_encoder and pass the base where needed rather than
keeping both encoder and intel_encoder variables around.
v2: actually add all changes to the patch
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106071715.10613-1-lucas.demarchi@intel.com
The uapi vs. hw state split introduced a bug in
intel_crtc_disable_noatomic() where it's now frobbing an already
freed temp crtc state instead of adjusting the crtc state we
are really left with. Fix that by making a cleaner separation
beteen the two.
This causes explosions on any machine that boots up with pipes
already running but not hooked up to any encoder (typical
behaviour for gen2-4 VBIOS).
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: 58d124ea27 ("drm/i915: Complete crtc hw/uapi split, v6.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191105171447.22111-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Split out the DP specific parts, making it easier to add DSI specific
configuration. Also move the encoder specific parts towards the end, to
allow overriding generic configuration if needed. This also improves
clarity by making it clear the encoder independent configuration does
not depend on the encoder specific parts.
v2: Rebase
Cc: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191104141439.26312-3-jani.nikula@intel.com
Use a simple pointer to the relevant element instead of duplicating the
array subscription. No functional changes.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191104141439.26312-2-jani.nikula@intel.com
Since CNP it's possible for rawclk to have two different values, 19.2
and 24 MHz. If the value indicated by SFUSE_STRAP register is different
from the power on default for PCH_RAWCLK_FREQ, we'll end up having a
mismatch between the rawclk hardware and software states after
suspend/resume. On previous platforms this used to work by accident,
because the power on defaults worked just fine.
Update the rawclk also on resume. The natural place to do this would be
intel_modeset_init_hw(), however VLV/CHV need it done before
intel_power_domains_init_hw(). Thus put it there even if it feels
slightly out of place.
v2: Call intel_update_rawclck() in intel_power_domains_init_hw() for all
platforms (Ville).
Reported-by: Shawn Lee <shawn.c.lee@intel.com>
Cc: Shawn Lee <shawn.c.lee@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Shawn Lee <shawn.c.lee@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191101142024.13877-1-jani.nikula@intel.com
For MST on Tiger Lake there are different moments when we need to
configure the transcoder clock select. For the first link this is in step
7.a of the spec, before training the link. For additional streams this
should be done as part of step 8.b after programming receiver VC Payload
ID.
Bspec: 49190
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191030012448.14937-4-lucas.demarchi@intel.com
Non-TC ports always have tc_mode == TC_PORT_TBT_ALT so it was
switching aux to TBT mode for all combo-phy ports, happily this did
not caused any issue but is better follow BSpec.
Also this is reserved bit before ICL.
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Fixes: e9b7e1422d ("drm/i915: Sanitize the terminology used for TypeC port modes")
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191029011014.286885-1-jose.souza@intel.com
(cherry picked from commit 4974826482)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
For the HPD interrupt functionality the HW depends on power wells in the
display core domain to be on. Accordingly when enabling these power
wells the HPD polling logic will force an HPD detection cycle to account
for hotplug events that may have happened when such a power well was
off.
Thus a detect cycle started by polling could start a new detect cycle if
a power well in the display core domain gets enabled during detect and
stays enabled after detect completes. That in turn can lead to a
detection cycle runaway.
To prevent re-triggering a poll-detect cycle make sure we drop all power
references we acquired during detect synchronously by the end of detect.
This will let the poll-detect logic continue with polling (matching the
off state of the corresponding power wells) instead of scheduling a new
detection cycle.
Fixes: 6cfe7ec02e ("drm/i915: Remove the unneeded AUX power ref from intel_dp_detect()")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112125
Reported-and-tested-by: Val Kulkov <val.kulkov@gmail.com>
Reported-and-tested-by: wangqr <wqr.prg@gmail.com>
Cc: Val Kulkov <val.kulkov@gmail.com>
Cc: wangqr <wqr.prg@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191028181517.22602-1-imre.deak@intel.com
(cherry picked from commit a8ddac7c9f)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Lots of redundant assignments inside intel_primary_plane_create().
Get rid of them.
v2: Rebase due to fp16 landing
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031165652.10868-8-ville.syrjala@linux.intel.com
Let's try to keep the pixel format arrays somewhat sorted:
1. RGB before YUV
2. smaller bpp before larger bpp
3. X before A
4. RGB before BGR
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031165652.10868-7-ville.syrjala@linux.intel.com
ICL+ again supports alpha blending with 10bpc pixel formats.
Expose them.
v2: Add all the stuff I missed earlier!
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031165652.10868-6-ville.syrjala@linux.intel.com
CHV pipe B sprites gained support for the 10bpc X/ARGB pixel formats.
On VLV and CHV pipe A/C these are only supported by the primary
plane. Add the require bits to expose the new formats.
v2: Reorder the formats for consistency
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031165652.10868-4-ville.syrjala@linux.intel.com
UAPI Changes:
- Make context persistence optional
Allow userspace to tie the context lifetime to FD lifetime,
effectively allowing Ctrl-C killing of a process to also clean
up the hardware immediately.
Compute changes: https://github.com/intel/compute-runtime/pull/228
The compute driver is shipping in Ubuntu. uAPI acked by Mesa folks.
- Put future HW and their uAPIs under STAGING & BROKEN
Introduces DRM_I915_UNSTABLE Kconfig menu for working on the new
uAPI for future HW in upstream. We already disable driver loading
by default the platform is deemed ready. This is a second level
of protection based on compile time switch (STAGING & BROKEN).
- Under DRM_I915_UNSTABLE: Add the fake lmem region on iGFX
Fake local memory region on integrated GPU through cmdline:
memmap=2G$16G i915.fake_lmem_start=0x400000000
Currently allows testing non-mappable GGTT behavior and running
kernel selftest for local memory.
Driver Changes:
- Fix Bugzilla #112084: VGA external monitor not working (Ville)
- Add support for half float framebuffers (Ville)
- Add perf support on TGL (Lionel)
- Replace hangcheck by heartbeats (Chris)
- Allow SPT PCH on all AML devices (James)
- Add new CNL PCH for CML platform (Imre)
- Allow 100 ms (Kconfig) for workloads to exit before reset (Chris, Jon, Joonas)
- Forcibly pre-empt a context after 100 ms (Kconfig) of delay (Chris)
- Make timeslice duration Kconfig configurable (Chris)
- Whitelist PS_(DEPTH|INVOCATION)_COUNT for Tigerlake (Tapani)
- Support creating LMEM objects in kernel (Matt A)
- Adjust the location of RING_MI_MODE in the context image for TGL (Chris)
- Handle AUX interrupts for TC ports (Matt R)
- Add support for devices without mappable GGTT aperture (Daniele)
- Rename "inject_load_failure" module parameter to "inject_probe_failure" (Janusz)
- Handle fused off HDCP, FBC, DMC and DSC (Jose)
- Add support to one DP-MST stream on Tigerlake (Lucas)
- Add HuC firmware (and GuC) for TGL (Daniele)
- Allow ICL+ DSI on any pipe (Ville)
- Check some transcoder timing minimum limits (Ville)
- Don't set queue_priority_hint if we don't kick the submission (Chris)
- Introduce barrier pulses along engines to flush idle/in-flight requests (Chris)
- Drop assertion that ce->pin_mutex guards state updates (Chris)
- Cancel banned contexts on schedule-out (Chris)
- Cancel contexts when hangchecking is disabled (Chris)
- Catch GTT fault errors for gen11+ planes (Matt R)
- Print in debugfs if PSR is not enabled because of sink (Jose)
- Do not set MOCS control values on dgfx (Lucas)
- Setup io-mapping for LMEM (Abdiel)
- Support kernel mapping of LMEM objects (Abdiel)
- Add LMEM selftests (Matt A)
- Initialise PMU spinlock before registering (Chris)
- Clear DKL_TX_PMD_LANE_SUS before program TC voltage swing (Jose)
- Flip interpretation of ips fmin/fmax to max rps (Chris)
- Add VBT compression parameter block definition (Jani)
- Limit the blitter sizes to ensure low preemption latency (Chris)
- Fixup block_size rounding on BLT (Matt A)
- Don't try to place HWS in non-existing mappable region (Michal Wa)
- Don't allocate the ring in stolen if we lack aperture (Matt A)
- Add AUX B & C to DC_OFF_POWER_DOMAINS for Tigerlake (Matt R)
- Avoid HPD poll detect triggering a new detect cycle (Imre)
- Document the userspace fail with possible_crtcs (Ville)
- Drop lrc header page now unused by GuC (Daniele)
- Do not switch aux to TBT mode for non-TC ports (Jose)
- Restructure code to avoid depending on i915 but smaller structs (Chris, Tvrtko, Andi)
- Remove pm park/unpark notifications (Chris)
- Avoid lockdep cross-contamination between object types (Chris)
- Restructure DSC code (Jani)
- Fix dead locking in early workload shadow (Zhenyu)
- Split the legacy submission backend from the common CS ring buffer (Chris)
- Move intel_engine_context_in/out into intel_lrc.c (Tvrtko)
- Describe perf/wakeref structure members in documentation (Anna)
- Update renamed header files names in documentation (Anna)
- Add debugs to distingiush a cd2x update from a full cdclk pll update (Ville)
- Rework atomic global state locking (Ville)
- Allow planes to declare their minimum acceptable cdclk (Ville)
- Eliminate skl_check_pipe_max_pixel_rate() and simplify skl_max_scale() (Ville)
- Making loglevel of PSR2/SU logs same (Ap)
- Capture aux page table error register (Lionel)
- Add is_dgfx to device info (Jose)
- Split gen11_irq_handler to make it shareable (Lucas)
- Encapsulate kconfig constant values inside boolean predicates (Chris)
- Split memory_region initialisation into its own file (Chris)
- Use _PICK() for CHICKEN_TRANS() and add CHICKEN_TRANS_D (Ville)
- Add perf helper macros for comparing with whitelisted registers (Umesh)
- Fix i915_inject_load_error() name to read *_probe_* (Janusz)
- Drop unused AUX register offsets (Matt R)
- Provide more information on DP AUX failures (Matt R)
- Add GAM/SFC instdone to error state (Mika)
- Always track callers to intel_rps_mark_interactive() (Chris)
- Nuke 'mode' argument to intel_get_load_detect_pipe() (Ville)
- Simplify LVDS crtc_mask and pipe_mask setup (Ville)
- Stop frobbing crtc->base.mode (Ville)
- Do s/crtc_mask/pipe_mask/ (Ville)
- Split detaching and removing the vma (Chris)
- Selftest improvements (Chris, Tvrtko, Mika, Matt A, Lionel)
- GuC code improvements (Rob, Andi, Daniele)
- Check against i915_selftest only under CONFIG_SELFTEST (Chris)
- Refine occupancy test in kill_context() (Chris)
- Start kthreads before stopping (Chris)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191101104718.GA14323@jlahtine-desk.ger.corp.intel.com
Now that we split plane_state which I didn't want to do yet, we can
program the slave plane without requiring the master plane.
This is useful for programming bigjoiner slave planes as well. We
will no longer need the master's plane_state.
Changes since v1:
- set src/dst rectangles after copy_uapi_to_hw_state.
Changes since v2:
- Use the correct color_plane for pre-gen11 by using planar_linked_plane != NULL.
- Use drm_format_info_is_yuv_semiplanar in skl_plane_check() to fix gen11+.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031112610.27608-12-maarten.lankhorst@linux.intel.com
Splitting plane state is easier than splitting crtc_state,
before plane check we copy the drm properties to hw so we can
do the same in bigjoiner later on.
We copy the state after we did all the modeset handling, but fortunately
i915 seems to be split correctly and nothing during modeset looks
at plane_state.
Changes since v1:
- Do not clear hw state on duplication.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031112610.27608-11-maarten.lankhorst@linux.intel.com
Split up plane_state->base to uapi. This is done using the following patch,
ran after the previous commit that splits out any hw references:
@@
struct intel_plane_state *T;
identifier x;
@@
-T->base.x
+T->uapi.x
@@
struct intel_plane_state *T;
@@
-T->base
+T->uapi
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031112610.27608-10-maarten.lankhorst@linux.intel.com
Split up plane_state->base to hw. This is done using the following patch:
@@
struct intel_plane_state *T;
identifier x =~ "^(crtc|fb|alpha|pixel_blend_mode|rotation|color_encoding|color_range)$";
@@
-T->base.x
+T->hw.x
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031112610.27608-9-maarten.lankhorst@linux.intel.com
get_crtc_from_states() is called before plane_state is copied to uapi,
so use the uapi state there.
intel_legacy_cursor_update() could probably get away with looking at
the hw state, but for clarity always look at the uapi state.
Changes since v1:
- Convert entirety of intel_legacy_cursor_update (Ville).
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031112610.27608-8-maarten.lankhorst@linux.intel.com
Prepare to split up hw and uapi machinally, by adding a uapi and
hw alias. We will remove the base in a bit. This is a split from the
original uapi/hw patch, which did it all in one go.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031112610.27608-7-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Now that we separated everything into uapi and hw, it's
time to make the split definitive. Remove the union and
make a copy of the hw state on modeset and fastset.
Color blobs are copied in crtc atomic_check(), right
before color management is checked.
Changes since v1:
- Copy all blobs immediately after drm_atomic_helper_check_modeset().
- Clear crtc_state->hw on disable, instead of using clear_intel_crtc_state().
Changes since v2:
- Use intel_crtc_free_hw_state + clear in intel_crtc_disable_noatomic().
- Make a intel_crtc_prepare_state() function that clears the crtc_state
and copies hw members.
- Remove setting uapi.adjusted_mode, we now have a direct call to
drm_calc_timestamping_constants().
Changes since v3:
- Rename prefix copy_hw_to_uapi_state() with intel_crtc.
- Copy color blobs to uapi as well.
- Add a intel_crtc_copy_uapi_to_hw_state_nomodeset() function for clarity.
Changes since v4:
- Copy hw.adjusted_mode back to uapi.adjusted_mode, to shut up
the call to drm_calc_timestamping_constants() in
drm_atomic_helper_update_legacy_modeset_state().
- Use drm_property_replace_blob (Ville).
Changes since v5:
- Use hw->mode in intel_modeset_readout_hw_state(). (Ville)
- Copy to uapi.mode using drm_atomic_set_mode_for_crtc(). (Ville)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031112610.27608-6-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Split up crtc_state->base to uapi. This is done using the following patch,
ran after the previous commit that splits out any hw references:
@@
struct intel_crtc_state *T;
@@
-T->base
+T->uapi
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031112610.27608-5-maarten.lankhorst@linux.intel.com
Split up crtc_state->base to hw where appropriate. This is done using the following patch:
@@
struct intel_crtc_state *T;
identifier x =~ "^(active|enable|degamma_lut|gamma_lut|ctm|mode|adjusted_mode)$";
@@
-T->base.x
+T->hw.x
@@
struct drm_crtc_state *T;
identifier x =~ "^(active|enable|degamma_lut|gamma_lut|ctm|mode|adjusted_mode)$";
@@
-to_intel_crtc_state(T)->base.x
+to_intel_crtc_state(T)->hw.x
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031112610.27608-4-maarten.lankhorst@linux.intel.com
intel_get_load_detect_pipe() needs to set uapi active,
uapi enable is set by the call to drm_atomic_set_mode_for_crtc(),
so we can remove it.
intel_pipe_config_compare() needs to look at hw state, but I didn't
change spatch to look at it. It's easy enough to do manually.
intel_atomic_check() definitely needs to check for uapi enable,
otherwise intel_modeset_pipe_config cannot copy uapi state to hw.
Changes since v1:
- Actually set uapi.active in get_load_detect_pipe().
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031112610.27608-3-maarten.lankhorst@linux.intel.com
Prepare to split up hw and uapi machinally, by adding a uapi and
hw alias. We will remove the base in a bit. This is a split from the
original uapi/hw patch, which did it all in one go.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031112610.27608-2-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
We are still looking at drm_crtc_state in a few places, convert those
to use intel_crtc_state instead.
Changes since v1:
- Move to before uapi/hw split.
- Add hunks for intel_pm.c as well.
Changes since v2:
- Incorporate Ville's feedback.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031112610.27608-1-maarten.lankhorst@linux.intel.com
Non-TC ports always have tc_mode == TC_PORT_TBT_ALT so it was
switching aux to TBT mode for all combo-phy ports, happily this did
not caused any issue but is better follow BSpec.
Also this is reserved bit before ICL.
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Fixes: e9b7e1422d ("drm/i915: Sanitize the terminology used for TypeC port modes")
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191029011014.286885-1-jose.souza@intel.com
To avoid accidentally breaking things in the future add a
comment explaining why we misconfigure the pipe_mask.
Also toss in a TODO for investigating a single encoder
approach as opposed to the encoder-per-pipe approach.
v2: Drop a bogus TODO comment
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002162505.30716-6-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
There are no longer any pipe<->DSI port limitations on icl+.
Populate the pipe_mask accordingly.
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002162505.30716-4-ville.syrjala@linux.intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
We don't need to special case PCH vs. gen4 when setting up the LVDS
crtc_mask. Just claim pipes A|B|C work and
intel_encoder_possible_crtcs() will drop out any crtc that doesn't
exist.
v2: Put the special case first to match what most other encoders do
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002162505.30716-2-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
The core no longer uses drm_crtc_state::mode with atomic drivers,
so let's stop frobbing it in the driver. For the user mode readout
we'll just use an on stack mode.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191029145526.10308-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
For the HPD interrupt functionality the HW depends on power wells in the
display core domain to be on. Accordingly when enabling these power
wells the HPD polling logic will force an HPD detection cycle to account
for hotplug events that may have happened when such a power well was
off.
Thus a detect cycle started by polling could start a new detect cycle if
a power well in the display core domain gets enabled during detect and
stays enabled after detect completes. That in turn can lead to a
detection cycle runaway.
To prevent re-triggering a poll-detect cycle make sure we drop all power
references we acquired during detect synchronously by the end of detect.
This will let the poll-detect logic continue with polling (matching the
off state of the corresponding power wells) instead of scheduling a new
detection cycle.
Fixes: 6cfe7ec02e ("drm/i915: Remove the unneeded AUX power ref from intel_dp_detect()")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112125
Reported-and-tested-by: Val Kulkov <val.kulkov@gmail.com>
Reported-and-tested-by: wangqr <wqr.prg@gmail.com>
Cc: Val Kulkov <val.kulkov@gmail.com>
Cc: wangqr <wqr.prg@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191028181517.22602-1-imre.deak@intel.com
This is the minimum change to support 1 (and only 1) DP-MST monitor
connected on Tiger Lake. This change was isolated from previous patch
from José. In order to support more streams we will need to create a
master-slave relation on the transcoders and that is not currently
working yet.
v2: remove unused macro and use REG_FIELD_PREP() (Ville)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191029035049.5907-1-lucas.demarchi@intel.com
Replace PLLs names used in documentation to that used in the code.
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Fixes: 68ff39c3f8 ("drm/i915/tgl: Add new pll ids")
Signed-off-by: Anna Karas <anna.karas@intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190926123559.15717-1-anna.karas@intel.com
(cherry picked from commit d328bd4f90)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We're seeing some failures where an aux transaction still shows as
'busy' well after the timeout limit that the hardware is supposed to
enforce. Improve the error message so that we can see exactly which aux
channel this error happened on and what the status bits were during this
case that isn't supposed to happen.
v2:
- Make timeout a const variable so that the timeout & message will
match if we decide to change it in the future. (Lucas)
- Don't bother testing intel_dp->aux.name for NULL. (Lucas)
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191029173102.9451-1-matthew.d.roper@intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
DSC could be fused off, so not all GEN10+ platforms will support it.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191026001323.216052-5-jose.souza@intel.com
HDCP could be fused off, so not all GEN9+ platforms will support it.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191026001323.216052-2-jose.souza@intel.com
Our TGL CI platforms are running into cases where aux transactions have
failed to complete or declare a timeout well after the timeout limit
that the hardware is supposed to enforce. From the logs it appears that
these failures arise when aux transactions happen after we've entered
DC6:
<7> [622.523650] [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [622.523685] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02
...
<3> [622.535753] [drm:intel_dp_aux_xfer [i915]] *ERROR* dp aux hw did not signal timeout!
<3> [622.547745] [drm:intel_dp_aux_xfer [i915]] *ERROR* dp aux hw did not signal timeout!
<3> [622.559746] [drm:intel_dp_aux_xfer [i915]] *ERROR* dp aux hw did not signal timeout!
<3> [622.571744] [drm:intel_dp_aux_xfer [i915]] *ERROR* dp aux hw did not signal timeout!
<3> [622.583743] [drm:intel_dp_aux_xfer [i915]] *ERROR* dp aux hw did not signal timeout!
<3> [622.583780] [drm:intel_dp_aux_xfer [i915]] *ERROR* dp_aux_ch not done status 0xad400bff
<7> [622.863725] [drm:drm_dp_dpcd_access] Too many retries, giving up. First error: -110
On TGL AUX B & C are in PG1 (managed by the DMC firmware) rather
than PG3 as they were on ICL, so allowing DC6 means the DMC firmware
might shut off the power wells behind our backs when we're trying to use
them.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191025230623.27829-6-matthew.d.roper@intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
The change from the uapi coordinates to the internal coordinates
broke the cursor on i845/i865 due to src and dst getting swapped.
Fix it.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: 3a612765f4 ("drm/i915: Remove cursor use of properties for coordinates")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191028113036.27553-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
smatch complains about
drivers/gpu/drm/i915//display/intel_display.c:14403 intel_set_dp_tp_ctl_normal() error: uninitialized symbol 'conn'.
because it has no way to determine that the loop must have an entry.
Tell the static analysers to ignore the local, it will always be set.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191028142652.1987-2-chris@chris-wilson.co.uk
i915_irq.c is large. One reason for this is that has a large chunk of
the GT render power management stashed away in it. Extract that logic
out of i915_irq.c and intel_pm.c and put it under one roof.
Based on a patch by Chris Wilson.
Signed-off-by: Andi Shyti <andi.shyti@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191024211642.7688-1-chris@chris-wilson.co.uk
This sequence was recently added to fix internal HW sequences to
reset TC ports.
HSDES: 1507287614
HSDES: 14010071447
BSpec: 49292
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191021223408.87344-1-jose.souza@intel.com
Replace PLLs names used in documentation to that used in the code.
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Fixes: 68ff39c3f8 ("drm/i915/tgl: Add new pll ids")
Signed-off-by: Anna Karas <anna.karas@intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190926123559.15717-1-anna.karas@intel.com
Add description of wakeref member of intel_shared_dpll
structure to documentation.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Anna Karas <anna.karas@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191008092849.6511-1-anna.karas@intel.com
'Link CRC error' will now have same error level as
other PSR2 errors like 'RFB storage error' and
'VSC SDP uncorrectable error'.
Signed-off-by: Ap Kamal <kamal.ap@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1571819128-3264-1-git-send-email-kamal.ap@intel.com
Finally! For a very long time, our MST helpers have had one very
annoying issue: They don't know how to reprobe the topology state when
coming out of suspend. This means that if a user has a machine connected
to an MST topology and decides to suspend their machine, we lose all
topology changes that happened during that period. That can be a big
problem if the machine was connected to a different topology on the same
port before resuming, as we won't bother reprobing any of the ports and
likely cause the user's monitors not to come back up as expected.
So, we start fixing this by teaching our MST helpers how to reprobe the
link addresses of each connected topology when resuming. As it turns
out, the behavior that we want here is identical to the behavior we want
when initially probing a newly connected MST topology, with a couple of
important differences:
- We need to be more careful about handling the potential races between
events from the MST hub that could change the topology state as we're
performing the link address reprobe
- We need to be more careful about handling unlikely state changes on
ports - such as an input port turning into an output port, something
that would be far more likely to happen in situations like the MST hub
we're connected to being changed while we're suspend
Both of which have been solved by previous commits. That leaves one
requirement:
- We need to prune any MST ports in our in-memory topology state that
were present when suspending, but have not appeared in the post-resume
link address response from their parent branch device
Which we can now handle in this commit by modifying
drm_dp_send_link_address(). We then introduce suspend/resume reprobing
by introducing drm_dp_mst_topology_mgr_invalidate_mstb(), which we call
in drm_dp_mst_topology_mgr_suspend() to traverse the in-memory topology
state to indicate that each mstb needs it's link address resent and PBN
resources reprobed.
On resume, we start back up &mgr->work and have it reprobe the topology
in the same way we would on a hotplug, removing any leftover ports that
no longer appear in the topology state.
Changes since v4:
* Split indenting changes in drm_dp_mst_topology_mgr_resume() into a
separate patch
* Only fire hotplugs when something has actually changed after a link
address probe
* Don't try to change port->connector at all on ports, just throw out
ports that need their connectors removed to make things easier.
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022023641.8026-14-lyude@redhat.com
This is a complicated one. Essentially, there's currently a problem in the MST
core that hasn't really caused any issues that we're aware of (emphasis on "that
we're aware of"): locking.
When we go through and probe the link addresses and path resources in a
topology, we hold no locks when updating ports with said information. The
members I'm referring to in particular are:
- ldps
- ddps
- mcs
- pdt
- dpcd_rev
- num_sdp_streams
- num_sdp_stream_sinks
- available_pbn
- input
- connector
Now that we're handling UP requests asynchronously and will be using some of
the struct members mentioned above in atomic modesetting in the future for
features such as PBN validation, this is going to become a lot more important.
As well, the next few commits that prepare us for and introduce suspend/resume
reprobing will also need clear locking in order to prevent from additional
racing hilarities that we never could have hit in the past.
So, let's solve this issue by using &mgr->base.lock, the modesetting
lock which currently only protects &mgr->base.state. This works
perfectly because it allows us to avoid blocking connection_mutex
unnecessarily, and we can grab this in connector detection paths since
it's a ww mutex. We start by having drm_dp_mst_handle_up_req() hold this
when updating ports. For drm_dp_mst_handle_link_address_port() things
are a bit more complicated. As I've learned the hard way, we can grab
&mgr->lock.base for everything except for port->connector. See, our
normal driver probing paths end up generating this rather obvious
lockdep chain:
&drm->mode_config.mutex
-> crtc_ww_class_mutex/crtc_ww_class_acquire
-> &connector->mutex
However, sysfs grabs &drm->mode_config.mutex in order to protect itself
from connector state changing under it. Because this entails grabbing
kn->count, e.g. the lock that the kernel provides for protecting sysfs
contexts, we end up grabbing kn->count followed by
&drm->mode_config.mutex. This ends up creating an extremely rude chain:
&kn->count
-> &drm->mode_config.mutex
-> crtc_ww_class_mutex/crtc_ww_class_acquire
-> &connector->mutex
I mean, look at that thing! It's just evil!!! This gross thing ends up
making any calls to drm_connector_register()/drm_connector_unregister()
impossible when holding any kind of modesetting lock. This is annoying
because ideally, we always want to ensure that
drm_dp_mst_port->connector never changes when doing an atomic commit or
check that would affect the atomic topology state so that it can
reliably and easily be used from future DRM DP MST helpers to assist
with tasks such as scanning through the current VCPI allocations and
adding connectors which need to have their allocations updated in
response to a bandwidth change or the like.
Being able to hold &mgr->base.lock throughout the entire link probe
process would have been _great_, since we could prevent userspace from
ever seeing any states in-between individual port changes and as a
result likely end up with a much faster probe and more consistent
results from said probes. But without some rework of how we handle
connector probing in sysfs it's not at all currently possible. In the
future, maybe we can try using the sysfs locks to protect updates to
connector probing state and fix this mess.
So for now, to protect everything other than port->connector under
&mgr->base.lock and ensure that we still have the guarantee that atomic
check/commit contexts will never see port->connector change we use a
silly trick. See: port->connector only needs to change in order to
ensure that input ports (see the MST spec) never have a ghost connector
associated with them. But, there's nothing stopping us from simply
throwing the entire port out and creating a new one in order to maintain
that requirement while still keeping port->connector consistent across
the lifetime of the port in atomic check/commit contexts. For all
intended purposes this works fine, as we validate ports in any contexts
we care about before using them and as such will end up reporting the
connector as disconnected until it's port's destruction finalizes. So,
we just do that in cases where we detect port->input has transitioned
from true->false. We don't need to worry about the other direction,
since a port without a connector isn't visible to userspace and as such
doesn't need to be protected by &mgr->base.lock until we finish
registering a connector for it.
For updating members of drm_dp_mst_port other than port->connector, we
simply grab &mgr->base.lock in drm_dp_mst_link_probe_work() for already
registered ports, update said members and drop the lock before
potentially registering a connector and probing the link address of it's
children.
Finally, we modify drm_dp_mst_detect_port() to take a modesetting lock
acquisition context in order to acquire &mgr->base.lock under
&connection_mutex and convert all it's users over to using the
.detect_ctx probe hooks.
With that, we finally have well defined locking.
Changes since v4:
* Get rid of port->mutex, stop using connection_mutex and just use our own
modesetting lock - mgr->base.lock. Also, add a probe_lock that comes
before this patch.
* Just throw out ports that get changed from an output to an input, and
replace them with new ports. This lets us ensure that modesetting
contexts never see port->connector go from having a connector to being
NULL.
* Write an extremely detailed explanation of what problems this is
trying to fix, since there's a _lot_ of context here and I honestly
forgot some of it myself a couple times.
* Don't grab mgr->lock when reading port->mstb in
drm_dp_mst_handle_link_address_port(). It's not needed.
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022023641.8026-7-lyude@redhat.com
snb supports fp16 pixel formats on the sprite planes. Expose that
capability. Nothing special needs to be done, it just works.
v2: Rebase on top of icl fp16
Split snb+ sprite bits into a separate patch
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015193035.25982-11-ville.syrjala@linux.intel.com
ivb+ supports fp16 pixel formats on the sprite planes planes. Expose
that capability.
On ivb/hsw fp16 scanout is slightly busted. The output from the plane
will have 1/4 the expected value. For the sprite plane we can fix that
up with the plane gamma unit. This was fixed on bdw.
v2: Rebase on top of icl fp16
Split the ivb+ sprite birs into a separate patch
v3: Move ivb_need_sprite_gamma() check one level up so that
we don't waste time programming garbage into he gamma registers
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015193035.25982-10-ville.syrjala@linux.intel.com
gen4+ supports fp16 pixel formats on the primary planes. Add the
relevant code.
On ivb fp16 scanout is slightly busted. The output from the plane will
have 1/4 the expected value. For the primary plane we would have to
use the pipe gamma or pipe csc to correct that which would affect all
the other planes as well, hence we simply choose not to expose fp16
on the ivb primary plane. On hsw the primary plane got fixed.
On gmch platforms I observed that the plane width must be below 2k
pixels with fp16 or else we get a corrupted image. This limitation
does not seem to be documented in bspec. I verified the exact limit
using the chv pipe B primary plane since it has windowing capability.
The stride limits are unaffected by fp16.
v2: Rebase on top of icl fp16
Split thea gen4+ primary plane bits into a separate patch
Deal with HAS_GMCH()
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015193035.25982-9-ville.syrjala@linux.intel.com
skl+ supports fp16 pixel formats on all universal planes. Add the
necessary bits to expose that capability. The main different to
icl is that we can't scale fp16, so need to add the relevant
checks.
v2: Rebase on top of icl fp16
Split skl+ bits into a separate patch
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015193035.25982-8-ville.syrjala@linux.intel.com
Now that the planes declare their minimum cdclk requirements properly
we don't need to check the cdclk in skl_max_scale() anymore. Just check
against the maximum downscale ratio, and move the code next to it's
only caller.
v2: Add a comment explaining the HQ vs. not thing
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015193035.25982-7-ville.syrjala@linux.intel.com
The normal cdclk handling now takes care of making sure the
plane's pixel rate doesn't exceed the spec appointed percentage
of the cdclk frequency. Thus we can nuke
skl_check_pipe_max_pixel_rate().
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015193035.25982-6-ville.syrjala@linux.intel.com
Various pixel formats and plane scaling impose additional constraints
on the cdclk frequency. Provide a new plane->min_cdclk() hook that
will be used to compute the minimum acceptable cdclk frequency for
each plane.
Annoyingly on some platforms the numer of active planes affects
this calculation so we must also toss in more planes into the
state when the number of active planes changes.
The sequence of state computation must also be changed:
1. check_plane() (updates plane's visibility etc.)
2. figure out if more planes now require update min_cdclk
computaion
3. calculate the new min cdclk for each plane in the state
4. if the minimum of any plane now exceeds the current
logical cdclk we recompute the cdclk
4. during cdclk computation take the planes' min_cdclk into
accoutn
5. follow the normal cdclk programming to change the
cdclk frequency. This may now require a modeset (except
on bxt/glk in some cases), which either succeeds or
fails depending on whether userspace has given
us permission to perform a modeset or not.
v2: Fix plane id check in intel_crtc_add_planes_to_state()
Only print the debug message when cdclk needs bumping
Use dev_priv->cdclk... as the old state explicitly
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015193035.25982-5-ville.syrjala@linux.intel.com
check_digital_port_conflicts() is done needlessly late. Move it earlier.
This will be needed as later on we want to set any_ms=true a bit later
for non-modesets too and we can't call this guy without the
connection_mutex held.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015193035.25982-4-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
So far we've sort of protected the global state under dev_priv with
the connection_mutex. I wan to change that so that we can change the
cdclk even for pure plane updates. To that end let's formalize the
protection of the global state to follow what I started with the cdclk
code already (though not entirely properly) such that any crtc mutex
will suffice as a read lock, and all crtcs mutexes act as the write
lock.
We'll also pimp intel_atomic_state_clear() to clear the entire global
state, so that we don't accidentally leak stale information between
the locking retries.
As a slight optimization we'll only lock the crtc mutexes to protect
the global state, however if and when we actually have to poke the
hw (eg. if the actual cdclk changes) we must serialize commits
across all crtcs so that a parallel nonblocking commit can't get
ahead of the cdclk reprogamming. We do that by adding all crtcs to
the state.
TODO: the old global state examined during commit may still
be a problem since it always looks at the _latest_ swapped state
in dev_priv. Need to add proper old/new state for that too I think.
v2: Remeber to serialize the commits if necessary
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015193035.25982-3-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
To make the logs a bit less confusing let's toss in some
debug prints to indicate whether the cdclk reprogramming
is going to happen with a single pipe active or whether we
need to turn all pipes off for the duration.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015193035.25982-2-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Replace sampling the engine state every so often with a periodic
heartbeat request to measure the health of an engine. This is coupled
with the forced-preemption to allow long running requests to survive so
long as they do not block other users.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191023133108.21401-5-chris@chris-wilson.co.uk
DSC isn't DP specific, so remove the dp_ prefix from the crtc state
member name. Also moving the member under the dsc sub-struct gives us
enough context to allow shortening the name to just config. No
functional changes.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022133414.8293-2-jani.nikula@intel.com
Reduce verbosity in code by renaming dsc_params member of crtc state to
simply dsc. There is enough context for this to be clear. No functional
changes.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022133414.8293-1-jani.nikula@intel.com
On ILK+ the documented min hdisplay is 64, min hblank is 32, and min
vblank is 5. On earlier platforms min hblank is also 32, and min
vblank is 3. Make sure the mode satisfies those limits.
There are further limits for HDMI and pfit use cases, but we'll check
for those in a more specific location.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718144340.1114-2-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
This way it's easier to figure out what didn't match when we have
multiple pipes enabled.
v2: pass drm_crtc and use the more common [CRTC:%d:%s] format
(Ville)
v3: use struct intel_crtc type to pass crtc around (Ville)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015164029.18431-5-lucas.demarchi@intel.com
Both Ice Lake and Elkhart Lake (gen 11) support MST on all external
connections except DDI A. Tiger Lake (gen 12) supports on all external
connections.
Move the check to happen inside intel_dp_mst_encoder_init() and add
specific platform checks.
v2: Replace != with == checks for ports on gen < 11 (Ville)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015164029.18431-3-lucas.demarchi@intel.com
In the transcoder port sync mode, the slave transcoders mask their vblanks
until master transcoder's vblank so while disabling them, make
sure slaves are disabled first and then the masters.
v5:
* Dont pass dev priv to get_slave_crtc (Ville)
v4:
* Obtain slave state from master (Maarten)
v3:
* Rebase
v2:
* Use the intel_old_crtc_state_disables() helper
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191018172725.1338-6-manasi.d.navare@intel.com
This clears the transcoder port sync bits of the TRANS_DDI_FUNC_CTL2
register during crtc_disable().
v3:
* Rebase on maarten's patches
v2:
* Directly write the trans_port_sync reg value (Maarten)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191018172725.1338-5-manasi.d.navare@intel.com
As per the display enable sequence, we need to follow the enable sequence
for slaves first with DP_TP_CTL set to Idle and configure the transcoder
port sync register to select the corersponding master, then follow the
enable sequence for master leaving DP_TP_CTL to idle.
At this point the transcoder port sync mode is configured and enabled
and the Vblanks of both ports are synchronized so then set DP_TP_CTL
for the slave and master to Normal and do post crtc enable updates.
v11:
* Rebase (Manasi)
v10:
* in trans sync mode, dont stop link train for tgl (Manasi)
v9:
Remove update_scanline_offset to rebase on Maarten's patch (Manasi)
v8:
* Rebase on Maarten's patches (Manasi)
v7:
* Use ffs(slaves) to get slave crtc (Ville)
v6:
* Modeset implies active_changed, remove one condition (Maarten)
v5:
* Fix checkpatch warning (Manasi)
v4:
* Reuse skl_commit_modeset_enables() hook (Maarten)
* Obtain slave crtc and states from master (Maarten)
v3:
* Rebase on drm-tip (Manasi)
v2:
* Create a icl_update_crtcs hook (Maarten, Danvet)
* This sequence only for CRTCs in trans port sync mode (Maarten)
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191018172725.1338-4-manasi.d.navare@intel.com
After the state is committed, we readout the HW registers and compare
the HW state with the SW state that we just committed.
For Transcdoer port sync, we add master_transcoder and the
salves bitmask to the crtc_state, hence we need to read those during
the HW state readout to avoid pipe state mismatch.
v11:
* Move master trans init to get pipe_Config hooks (Ville)
v10:
* Initialize master_tarnscoder readout for all platforms (Ville)
v9:
* Initialize master_transcoder = INVALID at get config (Ville)
v8:
* Use master_select -1, address TRANS_EDP case (Ville)
* Rename master_transcoder to _readout (Lucas)
v7:
* NDont read HW state for DSI
v6:
* Go through both parts of HW readout (Maarten)
* Add a WARN if the same trans configured as
master and slave (Ville, Maarten)
v5:
* Add return INVALID in defaut case (Maarten)
v4:
* Get power domains in master loop for get_config (Ville)
v3:
* Add TRANSCODER_D (Maarten)
* v3 Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
v2:
* Add Transcoder_D and MISSING_CASE (Maarten)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191018172725.1338-3-manasi.d.navare@intel.com
In case of tiled displays where different tiles are displayed across
different ports, we need to synchronize the transcoders involved.
This patch implements the transcoder port sync feature for
synchronizing one master transcoder with one or more slave
transcoders. This is only enbaled in slave transcoder
and the master transcoder is unaware that it is operating
in this mode.
This has been tested with tiled display connected to ICL.
v7:
* Rebase on Maarten's patches
v6:
* Use master_trans +1 and address missing trans_edp case (Ville)
v5:
* Add TRANSCODER_D case and MISSING_CASE (Maarten)
v4:
Rebase
v3:
* Check of DP_MST moved to atomic_check (Maarten)
v2:
* Do not use RMW, just write to the register in commit (Jani N)
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191018172725.1338-2-manasi.d.navare@intel.com
In case of tiled displays when the two tiles are sent across two CRTCs
over two separate DP SST connectors, we need a mechanism to synchronize
the two CRTCs and their corresponding transcoders.
So use the master-slave mode where there is one master corresponding
to last horizontal and vertical tile that needs to be genlocked with
all other slave tiles.
This patch identifies saves the master transcoder in all the slave
CRTC states. This is needed to select the master CRTC/transcoder
while configuring transcoder port sync for the corresponding slaves.
v6:
Rebase (manasi)
v5:
* Address Ville's comments
* Just pass crtc_state, no need to check GEN (Ville)
v4:
* Rebase
v3:
* Use master_tramscoder instead of master_crtc for valid
HW state readouts (Ville)
v2:
* Move this to intel_mode_set_pipe_config(Jani N, Ville)
* Use slave_bitmask to save associated slaves in master crtc state (Ville)
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191018172725.1338-1-manasi.d.navare@intel.com
All the timeout values fit in u16, so let's shrink the structure
a bit.
This ends up actually increasing the .text size a bit due to
some changes in instructions (constant imul+small jmps replaced
with mov+bigger jmpqs). Seems pretty arbitrary to me so I'll
just pretend I didn't see it.
text data bss dec hex filename
- 34521 360 0 34881 8841 intel_hdmi.o
+ 34537 360 0 34897 8851 intel_hdmi.o
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191010145127.7487-5-ville.syrjala@linux.intel.com
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
The only reason for the timeout2 value in the array is the
HDCP_2_2_AKE_SEND_HPRIME message. But that one still needs
special casing inside the loop, and so just ends up making
the code harder to read. Let's just remove this leaky
timeout2 abstraction and special case that one command
in a way that is easy to understand. We can then remove the
timeout2 member from struct entirely.
text data bss dec hex filename
- 34633 360 0 34993 88b1 intel_hdmi.o
+ 34521 360 0 34881 8841 intel_hdmi.o
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191010145127.7487-4-ville.syrjala@linux.intel.com
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
The .read_2_2() hooks is never called for any of the message
types with a zero timeout. So it's all just dead weight which
we can chuck.
text data bss dec hex filename
- 34701 360 0 35061 88f5 intel_hdmi.o
+ 34633 360 0 34993 88b1 intel_hdmi.o
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191010145127.7487-3-ville.syrjala@linux.intel.com
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
The DP port/pipe goes wonky if we try to use timings with
hdisplay==4096 on pre-HSW platforms. The link fails to train
and the pipe may not signal vblank interrupts. On HDMI such at
mode works just fine (tested on ELK/SNB/CHV). So let's refuse
such modes on DP on older platforms.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718144340.1114-1-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Replace the hand rolled stuff with drm_encoder_mask() when populating
possible_clones, and rename the function to
intel_encoder_possible_clones() to make it clear what it's used for.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002162505.30716-1-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Unlike other planes the cursor currently handles 180 degree rotation
adjustment during the hardware programming phase. Let's move that
stuff into intel_cursor_check_surface() to match how we do things
with other plane types.
And while at we'll plop in the final src x/y coordinates (which will
actually always be zero) into the src rect and color_plane[0].x/y,
just for some extra consistency.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015152757.12231-1-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
The MSA MISC computation now depends on the connector state, and
we do it from the DDI .pre_enable() hook. All that is fine for
DP SST but with MST we don't actually pass the connector state
to the dig port's .pre_enable() hook which leads to an oops.
Need to think more how to solve this in a cleaner fashion, but
for now let's just add a NULL check to stop the oopsing.
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Fixes: 0c06fa1560 ("drm/i915/dp: Add support of BT.2020 Colorimetry to DP MSA")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015190538.27539-1-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
The first come first served apporoach to handling the VBT
child device AUX ch conflicts has backfired. We have machines
in the wild where the VBT specifies both port A eDP and
port E DP (in that order) with port E being the real one.
So let's try to flip the preference around and let the last
child device win once again.
Cc: stable@vger.kernel.org
Cc: Jani Nikula <jani.nikula@intel.com>
Tested-by: Masami Ichikawa <masami256@gmail.com>
Tested-by: Torsten <freedesktop201910@liggy.de>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111966
Fixes: 36a0f92020 ("drm/i915/bios: make child device order the priority order")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191011202030.8829-1-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 41e35ffb38)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Once we do the hw vs. uapi split we can no longer use
drm_atomic_helper_calc_timestamping_constants() as it'll
consult the uapi state instead of the hw state.
So let's just update the vblank timestamping constants whenever
we update the scanline offset. We use both to convert the hw
scanline count to something which matches the software timing
values.
First I thought to put these into intel_crtc_vblank_on() but
we may want to get the scanline counter value before that (eg.
from some early tracepoints), so let's stick to updating them
a bit earlier than intel_crtc_vblank_on().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191007114943.29307-3-ville.syrjala@linux.intel.com
While not all platforms allow us to change the cdclk frequency
we should still verify that the fixed cdclk frequency isn't
too low. To that end let's cook up a .modeset_calc_cdclk()
implementation that only does the min_cdclk vs. actual cdclk
frequency check for such platforms.
Also we mustn't forget about double wide pipe on gen2/3 when
doing this.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190708125325.16576-11-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
We need to insert stuff between the plane and crtc .atomic_check()
drm_atomic_helper_check_planes() doesn't allow us to do that so
stop using it and hand roll the loops instead.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190708125325.16576-9-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
It attaches HDR metadata property to DP connector on GLK+.
It enables HDR metadata infoframe sdp on GLK+ to be used to send
HDR metadata to DP sink.
v2: Minor style fix
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919195311.13972-9-gwan-gyeong.mun@intel.com
Function intel_dp_setup_hdr_metadata_infoframe_sdp handles Infoframe SDP
header and data block setup for HDR Static Metadata. It enables writing of
HDR metadata infoframe SDP to panel. Support for HDR video was introduced
in DisplayPort 1.4. It implements the CTA-861-G standard for transport of
static HDR metadata. The HDR Metadata will be provided by userspace
compositors, based on blending policies and passed to the driver through
a blob property.
Because each of GEN11 and prior GEN11 have different register size for
HDR Metadata Infoframe SDP packet, it adds and uses different register
size.
Setup Infoframe SDP header and data block in function
intel_dp_setup_hdr_metadata_infoframe_sdp for HDR Static Metadata as per
dp 1.4 spec and CTA-861-F spec.
As per DP 1.4 spec, 2.2.2.5 SDP Formats. It enables Dynamic Range and
Mastering Infoframe for HDR content, which is defined in CTA-861-F spec.
According to DP 1.4 spec and CEA-861-F spec Table 5, in order to transmit
static HDR metadata, we have to use Non-audio INFOFRAME SDP v1.3.
+--------------------------------+-------------------------------+
| [ Packet Type Value ] | [ Packet Type ] |
+--------------------------------+-------------------------------+
| 80h + Non-audio INFOFRAME Type | CEA-861-F Non-audio INFOFRAME |
+--------------------------------+-------------------------------+
| [Transmission Timing] |
+----------------------------------------------------------------+
| As per CEA-861-F for INFOFRAME, including CEA-861.3 within |
| which Dynamic Range and Mastering INFOFRAME are defined |
+----------------------------------------------------------------+
v2: Add a missed blank line after function declaration.
v3: Remove not handled return values from
intel_dp_setup_hdr_metadata_infoframe_sdp(). [Uma]
v9: Addressed review comments from Ville.
- Add BUILD_BUG_ON to check a changing of struct dp_sdp size.
- Change a passed size toward write_infoframe() for DP infoframe sdp
packet for HDR static metadata.
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919195311.13972-8-gwan-gyeong.mun@intel.com
According to Bspec, GEN11 and prior GEN11 have different register size for
HDR Metadata Infoframe SDP packet. It adds new VIDEO_DIP_GMP_DATA_SIZE for
GEN11. And it makes handle different register size for
HDMI_PACKET_TYPE_GAMUT_METADATA on hsw_dip_data_size() for each GEN
platforms. It addresses Uma's review comments.
v9: Add WARN_ON() when buffer size if larger than register size. [Ville]
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919195311.13972-7-gwan-gyeong.mun@intel.com
It attaches the colorspace connector property to a DisplayPort connector.
Based on colorspace change, modeset will be triggered to switch to a new
colorspace.
And in order to distinguish colorspace bwtween DP and HDMI connector, it
adds a handling of drm_mode_create_dp_colorspace_property() to
intel_attach_colorspace_property().
Based on colorspace property value create a VSC SDP packet with appropriate
colorspace. This would help to enable wider color gamut like BT2020 on a
sink device.
v9: Addressed review comments from Ville
- Add a handling of drm_mode_create_dp_colorspace_property() to
intel_attach_colorspace_property(). This hunk moved from the previous
commit.
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919195311.13972-6-gwan-gyeong.mun@intel.com
When BT.2020 Colorimetry output is used for DP, we should program BT.2020
Colorimetry to MSA and VSC SDP. In order to handle colorspace of
drm_connector_state, it moves a calling of intel_ddi_set_pipe_settings()
function into intel_ddi_pre_enable_dp(). And it also rename
intel_ddi_set_pipe_settings() to intel_ddi_set_dp_msa().
As per DP 1.4a spec section 2.2.4 [MSA Data Transport]
The MSA data that the DP Source device transports for reproducing the main
video stream. Attribute data is sent once per frame during the main video
stream’s vertical blanking period.
In order to distinguish needed colorimetry for VSC SDP, it adds
intel_dp_needs_vsc_sdp function.
If the output colorspace requires vsc sdp or output format is YCbCr 4:2:0,
it uses MSA with VSC SDP.
As per DP 1.4a spec section 2.2.4.3 [MSA Field for Indication of
Color Encoding Format and Content Color Gamut] while sending
BT.2020 Colorimetry signals we should program MSA MISC1 fields which
indicate VSC SDP for the Pixel Encoding/Colorimetry Format.
v2: Remove useless parentheses
v3: Addressed review comments from Ville
- In order to checking output format and output colorspace on
intel_dp_needs_vsc_sdp(), it passes entire intel_crtc_state struct
value.
- Remove a pointless variable.
v9: Addressed review comments from Ville
- Remove a duplicated output color space from intel_crtc_state.
- In order to handle colorspace of drm_connector_state, it moves a
calling of intel_ddi_set_pipe_settings() function into
intel_ddi_pre_enable_dp().
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919195311.13972-3-gwan-gyeong.mun@intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
It refactors and renames a function which handled vsc sdp header and data
block setup for supporting colorimetry format.
Function intel_dp_setup_vsc_sdp handles vsc sdp header and data block
setup for pixel encoding / colorimetry format.
In order to use colorspace information of a connector, it adds an argument
of drm_connector_state type.
Setup VSC header and data block in function intel_dp_setup_vsc_sdp for
pixel encoding / colorimetry format as per dp 1.4a spec, section 2.2.5.7.1,
table 2-119: VSC SDP Header Bytes, section 2.2.5.7.5,
table 2-120: VSC SDP Payload for DB16 through DB18.
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919195311.13972-2-gwan-gyeong.mun@intel.com
On platforms that have the MCC PCH, Port C's hotplug interrupt
bits are mapped to TC1 bits.
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191011002618.3087-1-vivek.kasireddy@intel.com
The first come first served apporoach to handling the VBT
child device AUX ch conflicts has backfired. We have machines
in the wild where the VBT specifies both port A eDP and
port E DP (in that order) with port E being the real one.
So let's try to flip the preference around and let the last
child device win once again.
Cc: stable@vger.kernel.org
Cc: Jani Nikula <jani.nikula@intel.com>
Tested-by: Masami Ichikawa <masami256@gmail.com>
Tested-by: Torsten <freedesktop201910@liggy.de>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111966
Fixes: 36a0f92020 ("drm/i915/bios: make child device order the priority order")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191011202030.8829-1-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
Just a parameter rename,
drivers/gpu/drm/i915/display/intel_display.c:14425: warning: Function parameter or member '_new_plane_state' not described in 'intel_prepare_plane_fb'
drivers/gpu/drm/i915/display/intel_display.c:14425: warning: Excess function parameter 'new_state' description in 'intel_prepare_plane_fb'
drivers/gpu/drm/i915/display/intel_display.c:14534: warning: Function parameter or member '_old_plane_state' not described in 'intel_cleanup_plane_fb'
drivers/gpu/drm/i915/display/intel_display.c:14534: warning: Excess function parameter 'old_state' description in 'intel_cleanup_plane_fb'
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191012080208.18774-1-chris@chris-wilson.co.uk
UAPI Changes:
-Colorspace: Expose different prop values for DP vs. HDMI (Gwan-gyeong Mun)
-fourcc: Add DRM_FORMAT_MOD_ARM_16X16_BLOCK_U_INTERLEAVED (Raymond)
-not_actually: s/ENOTSUPP/EOPNOTSUPP/ in drm_edid and drm_mipi_dbi. This should
not reach userspace, but adding here to specifically call that out (Daniel)
-i810: Prevent underflow in dispatch ioctls (Dan)
-komeda: Add ACLK sysfs attribute (Mihail)
-v3d: Allow userspace to clean up after render jobs (Iago)
Cross-subsystem Changes:
-MAINTAINERS:
-Add Alyssa & Steven as panfrost reviewers (Rob)
-Add Jernej as DE2 reviewer (Maxime)
-Add Chen-Yu as Allwinner maintainer (Maxime)
-staging: Make some stack arrays static const (Colin)
Core Changes:
-ttm: Allow drivers to specify their vma manager (to use gem mgr) (Gerd)
-docs: Various fixes in connector/encoder/bridge docs (Daniel, Lyude, Laurent)
-connector: Allow more than 3 possible encoders for a connector (José)
-dp_cec: Allow a connector to be associated with a cec device (Dariusz)
-various: Fix some compile/sparse warnings (Ville)
-mm: Ensure mm node removals are properly serialised (Chris)
-panel: Specify the type of panel for drm_panels for later use (Laurent)
-panel: Use drm_panel_init to init device and funcs (Laurent)
-mst: Refactors and cleanups in anticipation of suspend/resume support (Lyude)
-vram:
-Add lazy unmapping for gem bo's (Thomas)
-Unify and rationalize vram mm and gem vram (Thomas)
-Expose vmap and vunmap for gem vram objects (Thomas)
-Allow objects to be pinned at the top of vram to avoid fragmentation (Thomas)
Driver Changes:
-various: Include drm_bridge.h instead of relying on drm_crtc.h (Boris)
-ast/mgag200: Refactor show_cursor(), move cursor to top of video mem (Thomas)
-komeda:
-Add error event printing (behind CONFIG) and reg dump support (Lowry)
-Add suspend/resume support (Lowry)
-Workaround D71 shadow registers not flushing on disable (Lowry)
-meson: Add suspend/resume support (Neil)
-omap: Miscellaneous refactors and improvements (Tomi/Jyri)
-panfrost/shmem: Silence lockdep by using mutex_trylock (Rob)
-panfrost: Miscellaneous small fixes (Rob/Steven)
-sti: Fix warnings (Benjamin/Linus)
-sun4i:
-Add vcc-dsi regulator to sun6i_mipi_dsi (Jagan)
-A few patches to figure out the DRQ/start delay calc on dsi (Jagan/Icenowy)
-virtio:
-Add module param to switch resource reuse workaround on/off (Gerd)
-Avoid calling vmexit while holding spinlock (Gerd)
-Use gem shmem helpers instead of ttm (Gerd)
-Accommodate command buffer allocations too big for cma (David)
Cc: Rob Herring <robh@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Dariusz Marcinkiewicz <darekm@google.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Raymond Smith <raymond.smith@arm.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Mihail Atanassov <Mihail.Atanassov@arm.com>
Cc: Lowry Li <Lowry.Li@arm.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Benjamin Gaignard <benjamin.gaignard@st.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Icenowy Zheng <icenowy@aosc.io>
Cc: Iago Toral Quiroga <itoral@igalia.com>
Cc: David Riley <davidriley@chromium.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEHF6rntfJ3enn8gh8cywAJXLcr3kFAl2d9h8ACgkQcywAJXLc
r3ms5gf9HIFpqwJ16CqaRukSnpcBcDoYUM8DGrOic+vw2bw14BQwFqvEOqrCkKL4
V6h/OCJlNFPtOcc1LvU/jeXxYf4AQWh/2qZeg+oee7HAGX5x8Y3f08GsEjO8+55t
QvSVxCKVti04M1ErPRfKrM7KPVE+IC+KdY26nO8Bf5zDGeCAkiPIDrdh2aZGMRdC
Eer0DJ96cgWW9LrhseCdj5nKwcR78DlbWa79zuPAss4LaBBbXqThNXYYzg/mZMKB
+VYgzs48tGYKK1NXXJ6biVI3brHrM52bqv5JpIncD5HepF1oIartWOMnbAO7MAqh
h/tgJWxL+4bnl9aqY87by1BtyVgl3w==
=kaOE
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2019-10-09-2' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.5:
UAPI Changes:
-Colorspace: Expose different prop values for DP vs. HDMI (Gwan-gyeong Mun)
-fourcc: Add DRM_FORMAT_MOD_ARM_16X16_BLOCK_U_INTERLEAVED (Raymond)
-not_actually: s/ENOTSUPP/EOPNOTSUPP/ in drm_edid and drm_mipi_dbi. This should
not reach userspace, but adding here to specifically call that out (Daniel)
-i810: Prevent underflow in dispatch ioctls (Dan)
-komeda: Add ACLK sysfs attribute (Mihail)
-v3d: Allow userspace to clean up after render jobs (Iago)
Cross-subsystem Changes:
-MAINTAINERS:
-Add Alyssa & Steven as panfrost reviewers (Rob)
-Add Jernej as DE2 reviewer (Maxime)
-Add Chen-Yu as Allwinner maintainer (Maxime)
-staging: Make some stack arrays static const (Colin)
Core Changes:
-ttm: Allow drivers to specify their vma manager (to use gem mgr) (Gerd)
-docs: Various fixes in connector/encoder/bridge docs (Daniel, Lyude, Laurent)
-connector: Allow more than 3 possible encoders for a connector (José)
-dp_cec: Allow a connector to be associated with a cec device (Dariusz)
-various: Fix some compile/sparse warnings (Ville)
-mm: Ensure mm node removals are properly serialised (Chris)
-panel: Specify the type of panel for drm_panels for later use (Laurent)
-panel: Use drm_panel_init to init device and funcs (Laurent)
-mst: Refactors and cleanups in anticipation of suspend/resume support (Lyude)
-vram:
-Add lazy unmapping for gem bo's (Thomas)
-Unify and rationalize vram mm and gem vram (Thomas)
-Expose vmap and vunmap for gem vram objects (Thomas)
-Allow objects to be pinned at the top of vram to avoid fragmentation (Thomas)
Driver Changes:
-various: Include drm_bridge.h instead of relying on drm_crtc.h (Boris)
-ast/mgag200: Refactor show_cursor(), move cursor to top of video mem (Thomas)
-komeda:
-Add error event printing (behind CONFIG) and reg dump support (Lowry)
-Add suspend/resume support (Lowry)
-Workaround D71 shadow registers not flushing on disable (Lowry)
-meson: Add suspend/resume support (Neil)
-omap: Miscellaneous refactors and improvements (Tomi/Jyri)
-panfrost/shmem: Silence lockdep by using mutex_trylock (Rob)
-panfrost: Miscellaneous small fixes (Rob/Steven)
-sti: Fix warnings (Benjamin/Linus)
-sun4i:
-Add vcc-dsi regulator to sun6i_mipi_dsi (Jagan)
-A few patches to figure out the DRQ/start delay calc on dsi (Jagan/Icenowy)
-virtio:
-Add module param to switch resource reuse workaround on/off (Gerd)
-Avoid calling vmexit while holding spinlock (Gerd)
-Use gem shmem helpers instead of ttm (Gerd)
-Accommodate command buffer allocations too big for cma (David)
Cc: Rob Herring <robh@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Dariusz Marcinkiewicz <darekm@google.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Raymond Smith <raymond.smith@arm.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Mihail Atanassov <Mihail.Atanassov@arm.com>
Cc: Lowry Li <Lowry.Li@arm.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Benjamin Gaignard <benjamin.gaignard@st.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Icenowy Zheng <icenowy@aosc.io>
Cc: Iago Toral Quiroga <itoral@igalia.com>
Cc: David Riley <davidriley@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Thu 10 Oct 2019 01:00:47 AM AEST
# gpg: using RSA key 732C002572DCAF79
# gpg: Can't check signature: public key not found
# Conflicts:
# drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c
# drivers/gpu/drm/i915/i915_drv.c
# drivers/gpu/drm/i915/i915_gem.c
# drivers/gpu/drm/i915/i915_gem_gtt.c
# drivers/gpu/drm/i915/i915_vma.c
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20191009150825.GA227673@art_vandelay
We have a src and dect rectangle, use it instead of relying on
the core drm properties.
Because the core by default clips the src/dst properties, after
the drm_atomic_helper_check_plane_state() we manually set the
unclipped src/dst rectangles. We still need the call for
visibility checks, but this way we are able to use the src/dst
rects in the check/commit code.
This removes the special case in the watermark code for cursor w/h.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004113514.17064-5-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[mlankhorst: Clarify commit message to state we use unclipped src/dst
This can all be done from the intel_update_crtc function. Split out the
pipe update into a separate function, just like is done for the planes.
Pull in all the changes done during fastset as well. It makes no sense
for it to still exist as a separate function.
Changes since v1:
- Inline intel_update_pipe_config()
Changes since v2:
- Add comments suggested by matt.
- Reorder commit_pipe_config() to remove all nesting. (Ville, Matt)
- Use intel_set_pipe_src_size((). (Matt)
Changes since v3:
- Move atomic_update_watermarks closer to the plane calls.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004113514.17064-7-maarten.lankhorst@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
[mlankhorst: Replace 8 spaces with tabs in comment]
We need to look at the hw fb in the plane split, so replace all the places
that use drm_plane_state with intel_plane_state.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004113514.17064-6-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[mlankhorst: Fix line wraps (Matt Roper)]
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Instead of looking at drm_plane_state, look at intel_plane_state directly.
This will allow us to make the watermarks bigjoiner aware, when we make it
work for bigjoiner slave pipes as well.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004113514.17064-4-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Using for_each_intel_plane_mask() fails because of an extra bracket,
remove the bracket so we can use it in the next commit.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004113514.17064-3-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
This slightly simplifies the EHL DPLL4 handling and also gives us more
flexibility in the future in case we need to skip the use of specific
PLL's (e.g., due to hardware workarounds and such).
v2:
- Replace GENMASK() with or'd BIT()'s to make the specific DPLLs more
explicit. (Ville)
- s/unsigned/unsigned long/. (Lucas)
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191008172920.11362-1-matthew.d.roper@intel.com
Moved common code to check gamma_enable to specific funcs per platform
in bit_precision func. icl doesn't support that and chv has separate
enable knob for CGM LUT.
v2:
-Simplified chv_gamma_precision() [Ville]
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191009065542.27415-3-swati2.sharma@intel.com
Premature gamma lut prepration and loading which was getting
reflected in first modeset causing different colors on
screen during boot.
Issue: In BIOS, gamma is disabled by default. However, legacy read_luts()
was setting crtc_state->base.gamma_lut and gamma_lut was programmed
with junk values which led to visual artifacts (different
colored screens instead of usual black during boot).
Fix: Calling read_luts() only when gamma is enabled which will happen
after first modeset.
This fix is independent from the revert 1b8588741f ("Revert
"drm/i915/color: Extract icl_read_luts()"") and should fix different colors
on screen in legacy platforms too.
v2:
-Added gamma_enable checks inside read_luts() [Ville/Jani N]
-Corrected gamma enable check for CHV [Ville]
v3:
-Added check in ilk_read_luts() [Ville]
-Simplified gamma enable check for CHV [Ville]
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111809
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111885
Tested-by: Jani Saarinen <jani.saarinen@intel.com>
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191009065542.27415-2-swati2.sharma@intel.com
DC3CO is useful power state, when DMC detects PSR2 idle frame
while an active video playback, playing 30fps video on 60hz panel
is the classic example of this use case.
B.Specs:49196 has a restriction to enable DC3CO only for Video Playback.
It will be worthy to enable DC3CO after completion of each pageflip
and switch back to DC5 when display is idle because driver doesn't
differentiate between video playback and a normal pageflip.
We will use Frontbuffer flush call tgl_dc3co_flush() to enable DC3CO
state only for ORIGIN_FLIP flush call, because DC3CO state has primarily
targeted for VPB use case. We are not interested here for frontbuffer
invalidates calls because that triggers PSR2 exit, which will
explicitly disable DC3CO.
DC5 and DC6 saves more power, but can't be entered during video
playback because there are not enough idle frames in a row to meet
most PSR2 panel deep sleep entry requirement typically 4 frames.
As PSR2 existing implementation is using minimum 6 idle frames for
deep sleep, it is safer to enable DC5/6 after 6 idle frames
(By scheduling a delayed work of 6 idle frames, once DC3CO has been
enabled after a pageflip).
After manually waiting for 6 idle frames DC5/6 will be enabled and
PSR2 deep sleep idle frames will be restored to 6 idle frames, at this
point DMC will triggers DC5/6 once PSR2 enters to deep sleep after
6 idle frames.
In future when we will enable S/W PSR2 tracking, we can change the
PSR2 required deep sleep idle frames to 1 so DMC can trigger the
DC5/6 immediately after S/W manual waiting of 6 idle frames get
complete.
v2: calculated s/w state to switch over dc3co when there is an
update. [Imre]
Used cancel_delayed_work_sync() in order to avoid any race
with already scheduled delayed work. [Imre]
v3: Cancel_delayed_work_sync() may blocked the commit work.
hence dropping it, dc5_idle_thread() checks the valid wakeref before
putting the reference count, which avoids any chances of dropping
a zero wakeref. [Imre (IRC)]
v4: Used frontbuffer flush mechanism. [Imre]
v5: Used psr.pipe to extract frontbuffer busy bits. [Imre]
Used cancel_delayed_work_sync() in encoder disable path. [Imre]
Used mod_delayed_work() instead of cancelling and scheduling a
delayed work. [Imre]
Used psr.lock in tgl_dc5_idle_thread() to enable psr2 deep
sleep. [Imre]
Removed DC5_REQ_IDLE_FRAMES macro. [Imre]
v6: Used dc3co_exitline check instead of TGL and dc3co allowed_dc_mask
checks, used delayed_work_pending with the psr lock and removed the
psr2_deep_slp_disabled flag. [Imre]
v7: Code refactoring, moved most of functional code to inte_psr.c [Imre]
Using frontbuffer_bits on psr.pipe check instead of
busy_frontbuffer_bits. [Imre]
Calculating dc3co_exit_delay in intel_psr_enable_locked. [Imre]
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191003081738.22101-6-anshuman.gupta@intel.com
DC3CO enabling B.Specs sequence requires to enable end configure
exit scanlines to TRANS_EXITLINE register, programming this register
has to be part of modeset sequence as this can't be change when
transcoder or port is enabled.
When system boots with only eDP panel there may not be real
modeset as BIOS has already programmed the necessary registers,
therefore it needs to force a modeset to enable and configure
DC3CO exitline.
v1: Computing dc3co_exitline crtc state from a DP encoder
compute config. [Imre]
Enabling and disabling DC3CO PSR2 transcoder exitline from
encoder pre_enable and post_disable hooks. [Imre]
Computing dc3co_exitline instead of has_dc3co_exitline bool. [Imre]
v2: Code refactoring for symmetry and to avoid exported function. [Imre]
Removing IS_TIGERLAKE check from compute_config, adding PIPE_A
restriction and clearing dc3co_exitline state if crtc is not active
or it is not PSR2 capable in dc3co exitline compute_config. [Imre]
Using GEN >= 12 check in dc3co exitline get_config. [Imre]
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191003081738.22101-5-anshuman.gupta@intel.com
Add target_dc_state and used by set_target_dc_state API
in order to enable DC3CO state with existing DC states.
target_dc_state will enable/disable the desired DC state in
DC_STATE_EN reg when "DC Off" power well gets disable/enable.
v2: commit log improvement.
v3: Used intel_wait_for_register to wait for DC3CO exit. [Imre]
Used gen9_set_dc_state() to allow/disallow DC3CO. [Imre]
Moved transcoder psr2 exit line enablement from tgl_allow_dc3co()
to a appropriate place haswell_crtc_enable(). [Imre]
Changed the DC3CO power well enabled call back logic as
recommended in review comments. [Imre]
v4: Used wait_for_us() instead of intel_wait_for_reg(). [Imre (IRC)]
v5: using udelay() instead of waiting for DC3CO exit status.
v6: Fixed minor unwanted change.
v7: Removed DC3CO powerwell and POWER_DOMAIN_VIDEO.
v8: Uniform checks by using only target_dc_state instead of allowed_dc_mask
in "DC off" power well callback. [Imre]
Adding "DC off" power well id to older platforms. [Imre]
Removed psr2_deep_sleep flag from tgl_set_target_dc_state. [Imre]
v9: Used switch case for target DC state in
gen9_dc_off_power_well_disable(), checking DC3CO state against
allowed DC mask, using WARN_ON() in
tgl_set_target_dc_state(). [Imre]
v10: Code refactoring and using sanitize_target_dc_state(). [Imre]
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191003081738.22101-4-anshuman.gupta@intel.com
Enable dc3co state in enable_dc module param and add dc3co
enable mask to allowed_dc_mask and gen9_dc_mask.
v1: Adding enable_dc=3,4 options to enable DC3CO with DC5 and DC6
independently. [Animesh]
v2: Using a switch statement for cleaner code. [Animesh]
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191003081738.22101-3-anshuman.gupta@intel.com
The officially validated plane width limit is 4k on skl+, however
we already had people using 5k displays before we started to enforce
the limit. Also it seems Windows allows 5k resolutions as well
(though not sure if they do it with one plane or two).
According to hw folks 5k should work with the possible
exception of the following features:
- Ytile (already limited to 4k)
- FP16 (already limited to 4k)
- render compression (already limited to 4k)
- KVMR sprite and cursor (don't care)
- horizontal panning (need to verify this)
- pipe and plane scaling (need to verify this)
So apart from last two items on that list we are already
fine. We should really verify what happens with those last
two items but I don't have a 5k display on hand atm so it'll
have to wait.
In the meantime let's just bump the limit back up to 5k since
several users have already been using it without apparent issues.
At least we'll be no worse off than we were prior to lowering
the limits.
Cc: stable@vger.kernel.org
Cc: Sean Paul <sean@poorly.run>
Cc: José Roberto de Souza <jose.souza@intel.com>
Tested-by: Leho Kraav <leho@kraav.com>
Fixes: 372b9ffb57 ("drm/i915: Fix skl+ max plane width")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111501
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190905135044.2001-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Sean Paul <sean@poorly.run>
(cherry picked from commit bed34ef544)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The latest documented version of the VBT is 229, but no further data has
been added to the child device definition in block 2. Update the child
device version test to eliminate the "Expected child device config size
for VBT version XXX not known; assuming 39" debug messages from the
logs.
Bspec: 20124
Bspec: 20157
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002192258.1013-1-matthew.d.roper@intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Pair the gmbus setup and teardown in the same layer. This also fixes the
double gmbus teardown on the i915_driver_modeset_probe() error path.
Move the gmbus setup a bit later in the sequence to make the follow-up
refactoring easier, and to pinpoint any unexpected consequences of this
change right here, instead of the later refactoring.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004122019.12009-3-jani.nikula@intel.com
Rename the function per Ville's suggestion. No functional changes.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004122019.12009-1-jani.nikula@intel.com
Our other backends return an actual error value upon failure. Do the
same for stolen objects, which currently just return NULL on failure.
Signed-off-by: CQ Tang <cq.tang@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004170452.15410-2-matthew.auld@intel.com
The current "disable C3+" workaround for the delayed vblank
irqs on i945gm no longer works. I'm not sure what changed, but
now I need to also disable C2. I also got my hands on a i915gm
machine that suffers from the same issue.
After some furious poking of registers I managed to find a
better workaround: The "Do not Turn off Core Render Clock in C
states" bit. With that I no longer have to disable any C-states,
and as a nice bonus the power cost is only ~1/4 of the
"disable C3+" method (which mind you doesn't even work anymore,
and so would have an even higher power cost if we made it work
by also disabling C2).
So let's throw out all the cpuidle/qos crap and just toggle
the magic bit as needed. And we extend the workaround to cover
i915gm as well.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191003140231.24408-1-ville.syrjala@linux.intel.com
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Forgo the struct_mutex serialisation for i915_active, and interpose its
own mutex handling for active/retire.
This is a multi-layered sleight-of-hand. First, we had to ensure that no
active/retire callbacks accidentally inverted the mutex ordering rules,
nor assumed that they were themselves serialised by struct_mutex. More
challenging though, is the rule over updating elements of the active
rbtree. Instead of the whole i915_active now being serialised by
struct_mutex, allocations/rotations of the tree are serialised by the
i915_active.mutex and individual nodes are serialised by the caller
using the i915_timeline.mutex (we need to use nested spinlocks to
interact with the dma_fence callback lists).
The pain point here is that instead of a single mutex around execbuf, we
now have to take a mutex for active tracker (one for each vma, context,
etc) and a couple of spinlocks for each fence update. The improvement in
fine grained locking allowing for multiple concurrent clients
(eventually!) should be worth it in typical loads.
v2: Add some comments that barely elucidate anything :(
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-6-chris@chris-wilson.co.uk
As we need to use a mutex to serialise i915_active activation
(because we want to allow the callback to sleep), we need to push the
i915_active.retire into a worker callback in case we get need to retire
from an atomic context.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-5-chris@chris-wilson.co.uk
Replace the struct_mutex requirement for pinning the i915_vma with the
local vm->mutex instead. Note that the vm->mutex is tainted by the
shrinker (we require unbinding from inside fs-reclaim) and so we cannot
allocate while holding that mutex. Instead we have to preallocate
workers to do allocate and apply the PTE updates after we have we
reserved their slot in the drm_mm (using fences to order the PTE writes
with the GPU work and with later unbind).
In adding the asynchronous vma binding, one subtle requirement is to
avoid coupling the binding fence into the backing object->resv. That is
the asynchronous binding only applies to the vma timeline itself and not
to the pages as that is a more global timeline (the binding of one vma
does not need to be ordered with another vma, nor does the implicit GEM
fencing depend on a vma, only on writes to the backing store). Keeping
the vma binding distinct from the backing store timelines is verified by
a number of async gem_exec_fence and gem_exec_schedule tests. The way we
do this is quite simple, we keep the fence for the vma binding separate
and only wait on it as required, and never add it to the obj->resv
itself.
Another consequence in reducing the locking around the vma is the
destruction of the vma is no longer globally serialised by struct_mutex.
A natural solution would be to add a kref to i915_vma, but that requires
decoupling the reference cycles, possibly by introducing a new
i915_mm_pages object that is own by both obj->mm and vma->pages.
However, we have not taken that route due to the overshadowing lmem/ttm
discussions, and instead play a series of complicated games with
trylocks to (hopefully) ensure that only one destruction path is called!
v2: Add some commentary, and some helpers to reduce patch churn.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-4-chris@chris-wilson.co.uk
On platfroms with gen10+ display, driver must set the enable bit of
AUDIO_PIN_BUF_CTL register before transactions with the HDA controller
can proceed. Add setting this bit to the audio power up sequence.
Failing to do this resulted in errors during display audio codec probe,
and failures during resume from suspend.
Note: We may also need to disable the bit afterwards, but there are
still unresolved issues with that.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111214
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191003085531.30990-1-kai.vehmanen@linux.intel.com
Add aux_busy_last_status to intel_dp. Don't bother with initializing to
all ones; the only difference is potentially missing logging for one
error case if the readout is all zeros.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002144138.7917-1-jani.nikula@intel.com
The Thunderbolt PLL divider values on TGL differ from the ICL ones,
update the PLL parameter calculation function accordingly.
Bspec: 49204
v2:
- Remove unused refclk config. (José)
Cc: Jose Souza <jose.souza@intel.com>
Cc: Clinton A Taylor <clinton.a.taylor@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Mika Westerberg <mika.westerberg@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jose Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002204108.32242-1-imre.deak@intel.com
This reverts commit 4eaceea3a0.
Several userspace clients (modesetting ddx and mutter+wayland at least)
handle encoder.possible_crtcs incorrectly. What they essentially do is
the following:
possible_crtcs = ~0;
for_each_possible_encoder(connector)
possible_crtcs &= encoder->possible_crtcs;
Ie. they calculate the intersection of the possible_crtcs
for the connector when they really should be calculating the
union instead.
In our case each MST encoder now has just one unique bit set,
and so the intersection is always zero. The end result is that
MST connectors can't be lit up because no crtc can be found to
drive them.
I've submitted a fix for the modesetting ddx [1], and complained
on #wayland about mutter, so hopefully the situation will improve
in the future. In the meantime we have regression, and so must go
back to the old way of misconfiguring possible_crtcs in the kernel.
[1] https://gitlab.freedesktop.org/xorg/xserver/merge_requests/277
Cc: Jonas Ådahl <jadahl@gmail.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111507
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903154018.26357-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit e838bfa8e1)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We haven't done any backmerge for a while due to the merge window, and it
starts to become an issue for komeda. Let's bring 5.4-rc1 in.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
I forgot to update the g4x sprite scaling stride check when GTT
remapping was introduced. The stride of the original framebuffer
is irrelevant when remapping is used and instead we want to check
the stride of the remapped view.
Also drop the duplicate width_bytes check. We already check that
a few lines earlier.
Fixes: df79cf4419 ("drm/i915: Store the final plane stride in plane_state")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190930183045.662-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 006e570128)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
There was a integer wraparound when mode_clock became too high,
and we didn't correct for the FEC overhead factor when dividing,
with the calculations breaking at HBR3.
As a result our calculated bpp was way too high, and the link width
limitation never came into effect.
Print out the resulting bpp calcululations as a sanity check, just
in case we ever have to debug it later on again.
We also used the wrong factor for FEC. While bspec mentions 2.4%,
all the calculations use 1/0.972261, and the same ratio should be
applied to data M/N as well, so use it there when FEC is enabled.
This fixes the FIFO underrun we are seeing with FEC enabled.
Changes since v2:
- Handle fec_enable in intel_link_compute_m_n, so only data M/N is adjusted. (Ville)
- Fix initial hardware readout for FEC. (Ville)
Changes since v3:
- Remove bogus fec_to_mode_clock. (Ville)
Changes since v4:
- Use the correct register for icl. (Ville)
- Split hw readout to a separate patch.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: d9218c8f6c ("drm/i915/dp: Add helpers for Compressed BPP and Slice Count for DSC")
Cc: <stable@vger.kernel.org> # v5.0+
Cc: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190925082110.17439-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit ed06efb801)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
All the MG registers is based on the tc_port not port, so
MG_PHY_PORT_LN() was subtracting port and PORT_C what is very
fragile.
So replacing port to tc_port in all MG register macros and users
like we have for DKL.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191001193729.123736-1-jose.souza@intel.com
I forgot to update the g4x sprite scaling stride check when GTT
remapping was introduced. The stride of the original framebuffer
is irrelevant when remapping is used and instead we want to check
the stride of the remapped view.
Also drop the duplicate width_bytes check. We already check that
a few lines earlier.
Fixes: df79cf4419 ("drm/i915: Store the final plane stride in plane_state")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190930183045.662-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Drop the tv_mode NULL check since intel_tv_mode_find() never
actually returns NULL, and flip the condition around so that
the MODE_OK case is at the end, which is customary to all
the other .mode_valid() implementations.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191001154629.11063-2-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
