Since the addition of the g12a, the last register is
AUDIO_CLK_SPDIFOUT_B_CTRL.
Fixes: 075001385c ("clk: meson: axg-audio: add g12a support")
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Defining the number of each input type is no longer necessary since
we are not using the clk-input hack anymore
Fixes: 282420eed2 ("clk: meson: axg-audio: migrate to the new parent description method")
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
When setting the 100MHz, 500MHz, 666MHz and 1GHz rate for CPU clocks,
CCF will use the SYS_PLL to handle these frequencies, but:
- using FIXED_PLL derived FCLK_DIV2/DIV3 clocks is more precise
- the Amlogic G12A/G12B/SM1 Suspend handling in firmware doesn't
handle entering suspend using SYS_PLL for these frequencies
Adding CLK_MUX_ROUND_CLOSEST on all the muxes of the non-SYS_PLL
cpu clock tree helps CCF always selecting the FCLK_DIV2/DIV3 as source
for these frequencies.
Fixes: ffae8475b9 ("clk: meson: g12a: add notifiers to handle cpu clock change")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
CLK_SET_RATE_NO_REPARENT is wrongly set on the g12a cpu premux0 clocks
flags, and CLK_SET_RATE_PARENT is required for the g12a cpu premux0 clock
and the g12b cpub premux0 clock, otherwise CCF always selects the SYS_PLL
clock to feed the cpu cluster.
Fixes: ffae8475b9 ("clk: meson: g12a: add notifiers to handle cpu clock change")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
The meson-saradc driver manually sets the input clock for
sar_adc_clk_sel. Update the GXBB clock driver (which is used on GXBB,
GXL and GXM) so the rate settings on sar_adc_clk_div are propagated up
to sar_adc_clk_sel which will let the common clock framework select the
best matching parent clock if we want that.
This makes sar_adc_clk_div consistent with the axg-aoclk and g12a-aoclk
drivers, which both also specify CLK_SET_RATE_PARENT.
Fixes: 33d0fcdfe0 ("clk: gxbb: add the SAR ADC clocks and expose them")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
The Amlogic SM1 can set a dedicated clock frequency for each CPU core by
having a dedicate tree for each core similar to the CPU0 tree.
Like the DSU tree, a supplementaty mux has been added to use the CPU0
frequency instead.
But since the cluster only has a single power rail and shares a single PLL,
it's not worth adding 3 unsused clock tree, so we add only the mux to
select the CPU0 clock frequency for each CPU1, CPU2 and CPU3 cores.
They are set read-only because the early boot stages sets them to select
the CPU0 input clock.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
The Amlogic SM1 DynamIQ Shared Unit has a dedicated clock tree similar to
the CPU clock tree with a supplementaty mux to select the CPU0 clock
instead.
Leave this as read-only since it's set up by the early boot stages.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Add the new GP1 PLL for the Amlogic SM1 SoC, used to feed the new
DynamIQ Shared Unit of the ARM Cores Complex.
This also adds a dedicated set of clock and compatible for SM1.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
On the g12a, the register space dedicated to the audio clock also
provides some resets. Let the clock controller register a reset
provider as well for this SoC family.
the axg SoC family does not appear to provide this feature.
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
A future patch is going to change semantics of clk_register() so that
clk_hw::init is guaranteed to be NULL after a clk is registered. Avoid
referencing this member here so that we don't run into NULL pointer
exceptions.
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20190731193517.237136-4-sboyd@kernel.org
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Expose the CPUB clock id to add DVFS to the second CPU cluster of
the Amlogic G12B SoC.
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
In order to implement clock switching for the CLKID_CPU_CLK and
CLKID_CPUB_CLK, notifiers are added on specific points of the
clock tree :
cpu_clk / cpub_clk
| \- cpu_clk_dyn
| | \- cpu_clk_premux0
| | |- cpu_clk_postmux0
| | | |- cpu_clk_dyn0_div
| | | \- xtal/fclk_div2/fclk_div3
| | \- xtal/fclk_div2/fclk_div3
| \- cpu_clk_premux1
| |- cpu_clk_postmux1
| | |- cpu_clk_dyn1_div
| | \- xtal/fclk_div2/fclk_div3
| \- xtal/fclk_div2/fclk_div3
\ sys_pll / sys1_pll
This for each cluster, a single one for G12A, two for G12B.
Each cpu_clk_premux1 tree is marked as read-only and CLK_SET_RATE_NO_REPARENT,
to be used as "parking" clock in a safe clock frequency.
A notifier is added on each cpu_clk_premux0 to detech when CCF want to
change the frequency of the cpu_clk_dyn tree.
In this notifier, the cpu_clk_premux1 tree is configured to use the xtal
clock and then the cpu_clk_dyn is switch to cpu_clk_premux1 while CCF
updates the cpu_clk_premux0 tree.
A notifier is added on each sys_pll/sys1_pll to detect when CCF wants to
change the PLL clock source of the cpu_clk.
In this notifier, the cpu_clk is switched to cpu_clk_dyn while CCF
updates the sys_pll/sys1_pll frequency.
A third small notifier is added on each cpu_clk / cpub_clk and cpu_clk_dyn,
add a small delay at PRE_RATE_CHANGE/POST_RATE_CHANGE to let the other
notofiers change propagate before changing the cpu_clk_premux0 and sys_pll
clock trees.
This notifier set permits switching the cpu_clk / cpub_clk without any
glitches and using a safe parking clock while switching between sub-GHz
clocks using the cpu_clk_dyn tree.
This setup has been tested and validated on the Amlogic G12A and G12B
SoCs running the arm64 cpuburn at [1] and cycling between all the possible
cpufreq translations of each cluster and checking the final frequency using
the clock-measurer, script at [2].
[1] https://github.com/ssvb/cpuburn-arm/blob/master/cpuburn-a53.S
[2] https://gist.github.com/superna9999/d4de964dbc0f84b7d527e1df2ddea25f
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Add a clock driver for the cpu dynamic divider, this divider needs
to have a flag set before setting the divider value then removed
while writing the new value to the register.
This drivers implements this behavior and will be used essentially
on the Amlogic G12A and G12B SoCs for cpu clock trees.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
The clk input function which allows clock controllers to register a bypass
clock from a clock producer is no longer needed anymore since meson clock
controllers have migrated to a new parent allocation method.
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
During probe, bypass clocks (i.e. ee-in-xtal) are made from device-tree
inputs to provide input clocks which can be access through global name.
The cons of this method are the duplicated clocks, means more string
comparison.
Specify parent directly with device-tree clock name.
Remove the bypass clock registration from the ee probe function.
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
This clock controller use the string comparison method to describe parent
relation between the clocks, which is not optimized.
Migrate to the new way by using .parent_hws where possible (ie. when
all clocks are local to the controller) and use .parent_data otherwise.
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
This clock controller use the string comparison method to describe parent
relation between the clocks, which is not optimized.
Migrate to the new way by using .parent_hws where possible (ie. when
all clocks are local to the controller) and use .parent_data otherwise.
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
This clock controller use the string comparison method to describe parent
relation between the clocks, which is not optimized.
Migrate to the new way by using .parent_hws where possible (ie. when
all clocks are local to the controller) and use .parent_data otherwise.
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
This clock controller use the string comparison method to describe parent
relation between the clocks, which is not optimized.
Migrate to the new way by using .parent_hws where possible (ie. when
all clocks are local to the controller) and use .parent_data otherwise.
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
This clock controller use the string comparison method to describe parent
relation between the clocks, which is not optimized.
Migrate to the new way by using .parent_hws where possible (ie. when
all clocks are local to the controller) and use .parent_data otherwise.
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
During probe, bypass clocks (i.e. ao-in-xtal) are made from device-tree
inputs to provide input clocks which can be access through global name.
The cons of this method are the duplicated clocks, means more string
comparison.
Specify parent directly with device-tree clock name.
Function to regiter bypass clocks is removed.
Input parameters from meson aoclk data structure are deprecated and then
deleted since all aoclk files are migrated.
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
This clock controller use the string comparison method to describe parent
relation between the clocks, which is not optimized.
Migrate to the new way by using .parent_hws where possible (when parent
clocks are localy declared in the controller) and use .parent_data
otherwise.
Remove clk input helper and all bypass clocks (declared in probe function)
which are no longer used since we are able to use device-tree clock name
directly.
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
This clock controller use the string comparison method to describe parent
relation between the clocks, which is not optimized.
Migrate to the new way by using .parent_hws where possible (when parent
clocks are localy declared in the controller) and use .parent_data
otherwise.
Remove clk input helper and all bypass clocks (declared in probe function)
which are no longer used since we are able to use device-tree clock name
directly.
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
This clock controller use the string comparison method to describe parent
relation between the clocks, which is not optimized.
Migrate to the new way by using .parent_hws where possible (when parent
clocks are localy declared in the controller) and use .parent_data
otherwise.
Remove clk input helper and all bypass clocks (declared in probe function)
which are no longer used since we are able to use device-tree clock name
directly.
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
This clock controller use the string comparison method to describe parent
relation between the clocks, which is not optimized. A recent patch [0]
allows parents to be specified without string names or with device-tree
clock name by using a new assignment structure.
Migrate to the new way by using .parent_hws where possible (when parent
clocks are localy declared in the controller) and use .parent_data
otherwise.
Remove clk input helper and all bypass clocks (declared in probe function)
which are no longer used since we are able to use device-tree clock name
directly.
[0] commit fc0c209c14 ("clk: Allow parents to be specified without string names")
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
[jbrunet@baylibre.com: remove CLK_SET_RATE_PARENT from mst muxes]
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Replace hihi by hifi in the mali parent_names of the g12a SoC family.
Fixes: 085a4ea93d ("clk: meson: g12a: add peripheral clock controller")
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
side. The two main highlights in the core framework are the addition of an bulk
clk_get API that handles optional clks and an extra debugfs file that tells the
developer about the current parent of a clk.
The driver updates are dominated by i.MX in the diffstat, but that is mostly
because that SoC has started converting to the clk_hw style of clk
registration. The next big update is in the Amlogic meson clk driver that
gained some support for audio, cpu, and temperature clks while fixing some PLL
issues. Finally, the biggest thing that stands out is the conversion of a large
part of the Allwinner sunxi-ng driver to the new clk parent scheme that uses
less strings and more pointer comparisons to match clk parents and children up.
In general, it looks like we have a lot of little fixes and tweaks here and
there to clk data along with the normal addition of a handful of new drivers
and a couple new core framework features.
Core:
- Add a 'clk_parent' file in clk debugfs
- Add a clk_bulk_get_optional() API (with devm too)
New Drivers:
- Support gated clk controller on MIPS based BCM63XX SoCs
- Support SiLabs Si5341 and Si5340 chips
- Support for CPU clks on Raspberry Pi devices
- Audsys clock driver for MediaTek MT8516 SoCs
Updates:
- Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme
- Small frequency support for SiLabs Si544 chips
- Slow clk support for AT91 SAM9X60 SoCs
- Remove dead code in various clk drivers (-Wunused)
- Support for Marvell 98DX1135 SoCs
- Get duty cycle of generic pwm clks
- Improvement in mmc phase calculation and cleanup of some rate defintions
- Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs
- Add GPIO, SNVS and GIC clocks for i.MX8 drivers
- Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock
- Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting
- Add clks for new Exynos5422 Dynamic Memory Controller driver
- Clock definition for Exynos4412 Mali
- Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3
- Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M
- Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs
- TI clock probing done from DT by default instead of firmware
- Fix Amlogic Meson mpll fractional part and spread sprectrum issues
- Add Amlogic meson8 audio clocks
- Add Amlogic g12a temperature sensors clocks
- Add Amlogic g12a and g12b cpu clocks
- Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N
- Add CMM (Color Management Module) clocks on Renesas R-Car M3-W
- Add Clock Domain support on Renesas RZ/N1
-----BEGIN PGP SIGNATURE-----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=mK0C
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This round of clk driver and framework updates is heavy on the driver
update side. The two main highlights in the core framework are the
addition of an bulk clk_get API that handles optional clks and an
extra debugfs file that tells the developer about the current parent
of a clk.
The driver updates are dominated by i.MX in the diffstat, but that is
mostly because that SoC has started converting to the clk_hw style of
clk registration. The next big update is in the Amlogic meson clk
driver that gained some support for audio, cpu, and temperature clks
while fixing some PLL issues. Finally, the biggest thing that stands
out is the conversion of a large part of the Allwinner sunxi-ng driver
to the new clk parent scheme that uses less strings and more pointer
comparisons to match clk parents and children up.
In general, it looks like we have a lot of little fixes and tweaks
here and there to clk data along with the normal addition of a handful
of new drivers and a couple new core framework features.
Core:
- Add a 'clk_parent' file in clk debugfs
- Add a clk_bulk_get_optional() API (with devm too)
New Drivers:
- Support gated clk controller on MIPS based BCM63XX SoCs
- Support SiLabs Si5341 and Si5340 chips
- Support for CPU clks on Raspberry Pi devices
- Audsys clock driver for MediaTek MT8516 SoCs
Updates:
- Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme
- Small frequency support for SiLabs Si544 chips
- Slow clk support for AT91 SAM9X60 SoCs
- Remove dead code in various clk drivers (-Wunused)
- Support for Marvell 98DX1135 SoCs
- Get duty cycle of generic pwm clks
- Improvement in mmc phase calculation and cleanup of some rate defintions
- Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs
- Add GPIO, SNVS and GIC clocks for i.MX8 drivers
- Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock
- Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting
- Add clks for new Exynos5422 Dynamic Memory Controller driver
- Clock definition for Exynos4412 Mali
- Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3
- Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M
- Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs
- TI clock probing done from DT by default instead of firmware
- Fix Amlogic Meson mpll fractional part and spread sprectrum issues
- Add Amlogic meson8 audio clocks
- Add Amlogic g12a temperature sensors clocks
- Add Amlogic g12a and g12b cpu clocks
- Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N
- Add CMM (Color Management Module) clocks on Renesas R-Car M3-W
- Add Clock Domain support on Renesas RZ/N1"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (190 commits)
clk: consoldiate the __clk_get_hw() declarations
clk: sprd: Add check for return value of sprd_clk_regmap_init()
clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK
clk: Add Si5341/Si5340 driver
dt-bindings: clock: Add silabs,si5341
clk: clk-si544: Implement small frequency change support
clk: add BCM63XX gated clock controller driver
devicetree: document the BCM63XX gated clock bindings
clk: at91: sckc: use dedicated functions to unregister clock
clk: at91: sckc: improve error path for sama5d4 sck registration
clk: at91: sckc: remove unnecessary line
clk: at91: sckc: improve error path for sam9x5 sck register
clk: at91: sckc: add support to free slow clock osclillator
clk: at91: sckc: add support to free slow rc oscillator
clk: at91: sckc: add support to free slow oscillator
clk: rockchip: export HDMIPHY clock on rk3228
clk: rockchip: add watchdog pclk on rk3328
clk: rockchip: add clock id for hdmi_phy special clock on rk3228
clk: rockchip: add clock id for watchdog pclk on rk3328
clk: at91: sckc: add support for SAM9X60
...
- Do a DT/firmware lookup in clk_core_get() even when the DT index is a
nonsensical value
- Fix some clk data typos in the Amlogic DT headers/code
- Avoid returning junk in the TI clk driver when an invalid clk is
looked for
- Fix dividers for the emac clks on Stratix10 SoCs
- Fix default HDA rates on Tegra210 to correct distorted audio
-----BEGIN PGP SIGNATURE-----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=3QYB
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A handful of clk driver fixes and one core framework fix
- Do a DT/firmware lookup in clk_core_get() even when the DT index is
a nonsensical value
- Fix some clk data typos in the Amlogic DT headers/code
- Avoid returning junk in the TI clk driver when an invalid clk is
looked for
- Fix dividers for the emac clks on Stratix10 SoCs
- Fix default HDA rates on Tegra210 to correct distorted audio"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: socfpga: stratix10: fix divider entry for the emac clocks
clk: Do a DT parent lookup even when index < 0
clk: tegra210: Fix default rates for HDA clocks
clk: ti: clkctrl: Fix returning uninitialized data
clk: meson: meson8b: fix a typo in the VPU parent names array variable
clk: meson: fix MPLL 50M binding id typo
On Amlogic Meson G12b platform, the fclk_div3 seems to be necessary for
the system to operate correctly.
Disabling it cause the entire system to freeze, including peripherals.
Let's mark this clock as critical, fixing boot on G12b platforms.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Update the Meson G12A Clock driver to support the Amlogic G12B SoC.
G12B clock driver is very close, the main differences are :
- the clock tree is duplicated for the both clusters, and the
SYS_PLL are swapped between the clusters
- G12B has additional clocks like for CSI an other components
Here only the cpu clock tree is handled.
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Add the TS clocks used by two temperature sensors
Reviewed-by: Martin Blumenstingl<martin.blumenstingl@googlemail.com>
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> [fixed commit description]
Add the cts_i958 clock to control the clock source of the spdif output
block. It is used to select whether the clock source of the spdif output
is cts_amclk (when data are taken from i2s buffer) or the cts_mclk_i958
(when data are taken from the spdif buffer). The setup for this clock is
identical to GXBB, so this ports commit 7eaa44f620 ("clk: meson:
gxbb: add cts_i958 clock") to the Meson8/Meson8b/Meson8m2 clock driver.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Add the SPDIF master clock also referred as cts_mclk_i958. The setup for
this clock is identical to GXBB, so this ports commit 3c277c247e
("clk: meson: gxbb: add cts_mclk_i958") to the Meson8/Meson8b/Meson8m2
clock driver.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Add the I2S master clock also referred as cts_amclk. The setup for this
clock is identical to GXBB, so this ports commit 4087bd4b21 ("clk:
meson: gxbb: add cts_amclk") to the Meson8/Meson8b/Meson8m2 clock
driver.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Like the PLL and MPLL, the controller may require some magic setting to
be applied on startup.
This is needed when the initial setting is not applied by the boot ROM.
The controller need to do it when the setting applies to several clock,
like all the MPLLs in the case of g12a.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Until now (gx and axg), the mpll setting on boot (whatever the
bootloader) was good enough to generate a clean fractional division.
It is not the case on the g12a. While moving away from the vendor u-boot,
it was noticed the fractional part of the divider was no longer applied.
Like on the pll, some magic settings need to applied on the mpll
register.
This change adds the ability to do that on the mpll driver.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
After testing, it appears that the SSEN bit controls the spread
spectrum function on MPLL2, not MPLL0.
Fixes: 78b4af312f ("clk: meson-axg: add clock controller drivers")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
The documentation says there is an SSEN bit on mpll0 but, after testing
it, no spread spectrum function appears to be enabled by this bit on any
of the MPLLs.
Let's remove it until we know more
Fixes: 1f737ffa13 ("clk: meson: mpll: fix mpll0 fractional part ignored")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
The bit 'SSEN' available on some MPLL DSS outputs is not related to the
fractional part of the divider but to the function called
'Spread Spectrum'.
This function might be used to solve EM issues by adding a jitter on
clock signal. This widens the signal spectrum and weakens the peaks in it.
While spread spectrum might be useful for some application, it is
problematic for others, such as audio.
This patch introduce a new flag to the MPLL driver to enable (or not) the
spread spectrum function.
Fixes: 1f737ffa13 ("clk: meson: mpll: fix mpll0 fractional part ignored")
Tested-by: Martin Blumenstingl<martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
The variable which holds the parent names for the VPU clocks has a typo
in it. Fix this typo to make the variable naming in the driver
consistent. No functional changes.
Fixes: 41785ce562 ("clk: meson: meson8b: add the VPU clock trees")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
MPLL_5OM (the capital letter o) should indeed be MPLL_50M (the number)
Fix this before it gets used.
Fixes: 25db146aa7 ("dt-bindings: clk: meson: add g12a periph clock controller bindings")
Reported-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
- Remove clk_readl() and introduce BE versions of basic clk types
* clk-doc:
clk: Drop duplicate clk_register() documentation
clk: Document and simplify clk_core_get_rate_nolock()
clk: Remove 'flags' member of struct clk_fixed_rate
clk: nxp: Drop 'flags' on fixed_rate clk macro
clk: Document __clk_mux_determine_rate()
clk: Document CLK_MUX_READ_ONLY mux flag
clk: Document deprecated things
clk: Collapse gpio clk kerneldoc
* clk-more-critical:
clk: highbank: Convert to CLK_IS_CRITICAL
* clk-meson: (21 commits)
clk: meson: axg-audio: add g12a support
clk: meson: axg-audio: don't register inputs in the onecell data
clk: meson: axg_audio: replace prefix axg by aud
dt-bindings: clk: axg-audio: add g12a support
clk: meson: meson8b: add the video decoder clock trees
clk: meson: meson8b: add the VPU clock trees
clk: meson: meson8b: add support for the GP_PLL clock on Meson8m2
clk: meson: meson8b: use a separate clock table for Meson8m2
dt-bindings: clock: meson8b: export the video decoder clocks
clk: meson-g12a: add video decoder clocks
dt-bindings: clock: meson8b: export the VPU clock
clk: meson-g12a: add PCIE PLL clocks
dt-bindings: clock: g12a-aoclk: expose CLKID_AO_CTS_OSCIN
clk: meson-pll: add reduced specific clk_ops for G12A PCIe PLL
dt-bindings: clock: meson8b: drop the "ABP" clock definition
clk: meson: g12a: add cpu clocks
dt-bindings: clk: g12a-clkc: add VDEC clock IDs
dt-bindings: clock: axg-audio: unexpose controller inputs
dt-bindings: clk: g12a-clkc: add PCIE PLL clock ID
clk: g12a-aoclk: re-export CLKID_AO_SAR_ADC_SEL clock id
...
* clk-basic-be:
clk: core: replace clk_{readl,writel} with {readl,writel}
clk: core: remove powerpc special handling
powerpc/512x: mark clocks as big endian
clk: mux: add explicit big endian support
clk: multiplier: add explicit big endian support
clk: gate: add explicit big endian support
clk: fractional-divider: add explicit big endian support
clk: divider: add explicit big endian support
The g12a audio clock controller is largely similar to the existing axg
controller, with the addition of the spdif output B and TDM pad clocks.
This commit extends the existing axg audio clock controller driver
to work with multiple compatibles and add the g12a specific clocks
Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20190329160649.31603-5-jbrunet@baylibre.com
Clock inputs should not be exported outside the controller. It is a hack
to have a stable global clock name within the clock controller, even for
clocks external to the controller.
There is an ongoing effort to replace this hack with something better.
The first step is to not register those clocks in the provider anymore,
so we can completely remove them later on.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20190329160649.31603-4-jbrunet@baylibre.com
The audio clock controller is compatible with axg and g12a SoC family.
Having each clock name prefixed with "axg_" looks weird on the g12a.
This change replace the "axg_" by "aud_" in fron the clock names.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20190329160649.31603-3-jbrunet@baylibre.com
This adds the four video decoder clock trees.
VDEC_1 is split into two paths on Meson8b and Meson8m2:
- input mux called "vdec_1_sel"
- two dividers ("vdec_1_1_div" and "vdec_1_2_div") and gates ("vdec_1_1"
and "vdec_1_2")
- and an output mux (probably glitch-free) called "vdec_1"
On Meson8 the VDEC_1 tree is simpler because there's only one path:
- input mux called "vdec_1_sel"
- divider ("vdec_1_1_div") and gate ("vdec_1_1")
- (the gate is used as output directly, there's no mux)
The VDEC_HCODEC and VDEC_2 clocks are simple composite clocks each
consisting of an input mux, divider and a gate.
The VDEC_HEVC clock seems to have two paths similar to the VDEC_1 clock.
However, the register offsets of the second clock path is not known.
Amlogic's 3.10 kernel (which is used as reference) sets
HHI_VDEC2_CLK_CNTL[31] to 1 before changing the VDEC_HEVC clock and back
to 0 afterwards. For now, leave a TODO comment and only add the first
path.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Maxime Jourdan <mjourdan@baylibre.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20190324151423.19063-3-martin.blumenstingl@googlemail.com
The VPU clock tree is slightly different on all three supported SoCs:
Meson8 only has an input mux (which chooses between "fclk_div4",
"fclk_div3", "fclk_div5" and "fclk_div7"), a divider and a gate.
Meson8b has two VPU clock trees, each with an input mux (using the same
parents as the input mux on Meson8), divider and a gates. The final VPU
clock is a glitch-free mux which chooses between VPU_1 and VPU_2.
Meson8m2 uses a similar clock tree as Meson8b but the last input clock
is different: instead of using "fclk_div7" as input Meson8m2 uses
"gp_pll". This was probably done in hardware to improve the accuracy of
the clock because fclk_div7 gives us 2550MHz / 7 = 364.286MHz while
GP_PLL can achieve 364.0MHz.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20190324151104.18397-5-martin.blumenstingl@googlemail.com
Meson8m2 has a GP_PLL clock (similar to GP0_PLL on GXBB/GXL/GXM) which
is used as input for the VPU clocks.
The only supported frequency (based on Amlogic's vendor kernel sources)
is 364MHz which is achieved using the following parameters:
- input: XTAL (24MHz)
- M = 182
- N = 3
- OD = 2 ^ 2
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20190324151104.18397-4-martin.blumenstingl@googlemail.com
Meson8, Meson8b and Meson8m2 implement a similar clock controller.
However, there are a few differences between the three actual IP blocks.
One example where Meson8m2 differs from Meson8b is the VPU clock setup:
- the VPU input mux can choose between "fclk_div4", "fclk_div3",
"fclk_div5" and "fclk_div7" on Meson8b
- however, on Meson8m2 it can choose between "fclk_div4", "fclk_div3",
"fclk_div5" and "gp_pll" (GP_PLL only exists on Meson8m2, it's the
predecessor of the GP0_PLL clock on GXBB/GXL/GXM))
Add a separate clk_hw_onecell_data table for Meson8m2 so these
differences can be implemented in our clock controller driver. For now
meson8m2_hw_onecell_data is a clone of our existing
meson8b_hw_onecell_data.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20190324151104.18397-3-martin.blumenstingl@googlemail.com
Add the necessary clock parts for:
- VDEC_1: used to feed VDEC_1
- VDEC_HEVC: the "back" part of the VDEC_HEVC block
- VDEC_HEVCF: the "front" part of the VDEC_HEVC block
In previous SoC generations (GXL, GXBB), there was only one VDEC_HEVC
clock, which got split in two parts for G12A.
Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20190319101138.27520-2-mjourdan@baylibre.com
Add the PCIe reference clock feeding the USB3 + PCIE combo PHY.
This PLL needs a very precise register sequence to permit to be locked,
thus using the specific clk-pll pcie ops.
The PLL is then followed by :
- a fixed /2 divider
- a 5-bit 1-based divider
- a final /2 divider
This reference clock is fixed to 100MHz, thus only a single PLL setup
is added.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lkml.kernel.org/r/20190307141455.23879-4-narmstrong@baylibre.com
The Meson G12A PCIE PLL is fined tuned to deliver a very precise
100MHz reference clock for the PCIe Analog PHY, and thus requires
a strict register sequence to enable the PLL.
To simplify, use the _init() op to enable the PLL and keep
the other ops except set_rate since the rate is fixed.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lkml.kernel.org/r/20190307141455.23879-2-narmstrong@baylibre.com
Add the Amlogic G12A Family CPU Clock tree in read/only for now.
The CPU clock can either use the SYS_PLL for > 1GHz frequencies or
use a couple of div+mux from 1GHz/667MHz/24MHz source with 2 non-glitch
muxes.
Proper DVFS support will come in a second time.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
[narmstrong: fixed cpu clocks namings]
Link: https://lkml.kernel.org/r/20190304131129.7762-3-narmstrong@baylibre.com
When submitted v2 of the G12A AO-CLK IDs, the CLKID_AO_CTS_OSCIN was moved
to the internal non-exported bindings, but this clock is necessary for
the second AO-CEC-B module since it embeds the 32768Hz dual-divider
clock generator unlike the AO-CEC-A module.
Export it back to the public bindings.
Fixes: be3d960b0a ("dt-bindings: clk: add G12A AO Clock and Reset Bindings")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lkml.kernel.org/r/20190321092010.14382-1-narmstrong@baylibre.com
Remove the bindings ID of the clock input of the controller. These
clocks are purely internal to the controller, exposing them was a
mistake. Actually, these should not even be in the provider and have
IDs to begin with.
Unexpose these IDs before:
* someone starts using them (even if there no valid reason to do so)
* the actual clocks are removed. The fact that they exist is just the
result of an ugly hack. This will be resolved in CCF when we can
reference DT directly in parent table.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Maxime Jourdan <mjourdan@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20190213095835.17448-1-jbrunet@baylibre.com
The vid_pll_div is a programmable fractional divider, but vendor gives a
limited of known configuration value and it's corresponding fraction.
Thus when at reset value (0) or unknown value, we cannot determine the
result rate.
The initial behaviour was to print a warning, but the warning triggers
at each boot and when the clock tree is refreshed.
This patch moves the print to debug and returns 0 instead of the
parent rate.
Fixes: 72dbb8c94d ("clk: meson: Add vid_pll divider driver")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lkml.kernel.org/r/20190327151348.27402-1-narmstrong@baylibre.com
Make meson_clk_pll_is_better() consider a rate that precisely matches
the requested rate to be better than any previous rate (which was
smaller than the current).
Prior to commit 8eed1db1ad ("clk: meson: pll: update driver for the
g12a") meson_clk_get_pll_settings() returned early (before calling
meson_clk_pll_is_better()) if the rate from the current iteration
matches the requested rate precisely. After this commit
meson_clk_pll_is_better() is called unconditionally. This requires
meson_clk_pll_is_better() to work with the case where "now == rate".
This fixes a hang during boot on Meson8b / Odroid-C1 for me.
Fixes: 8eed1db1ad ("clk: meson: pll: update driver for the g12a")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20190324164327.22590-2-martin.blumenstingl@googlemail.com
When submitted v2 of the G12A AO-CLK IDs, the SAR_ADC_SEL ID was moved
to the internal non-exported bindings, but this clock is necessary and
mandatory for the SAR ADC bindings.
Export it back to the public bindings.
Fixes: be3d960b0a ("dt-bindings: clk: add G12A AO Clock and Reset Bindings")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lkml.kernel.org/r/20190304105358.4987-1-narmstrong@baylibre.com
There are 8 parents, use 0x7
Fixes: 085a4ea93d ("clk: meson: g12a: add peripheral clock controller")
Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20190319082611.6215-1-mjourdan@baylibre.com
We want the video decoder clocks to always round to closest. While the
muxes are already using CLK_MUX_ROUND_CLOSEST, the corresponding
CLK_DIVIDER_ROUND_CLOSEST was forgotten for the dividers.
Fix this by adding the flag to the two vdec dividers.
Fixes: a565242eb9 ("clk: meson: gxbb: add the video decoder clocks")
Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20190319102537.2043-1-mjourdan@baylibre.com
Fix a typo in the APB clock names by renaming them from "abp" to "apb".
No functional changes.
Fixes: a7d19b05ce ("clk: meson: meson8b: add the CPU clock post divider clocks")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lkml.kernel.org/r/20190210222603.6404-2-martin.blumenstingl@googlemail.com
Add the Amlogic G12A AO Clock and Reset controller driver handling
generation of Always-On clocks :
- AO Clocks and Reset for Always-On modules
- 32K Generation for USB and CEC
- SAR ADC controller clock
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lkml.kernel.org/r/20190212162859.20743-3-narmstrong@baylibre.com
The function used to probe the peripheral clock controller of the arm64
amlogic SoCs is mostly the same. We now have 3 of those controllers so
it is time to factorize things a bit.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20190201145345.6795-5-jbrunet@baylibre.com
Add the peripheral clock controller found in the g12a SoC family
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20190201145345.6795-4-jbrunet@baylibre.com
The g12a use fractional parameter of 17 useful bits. At the moment, this
parameter in encoded using u16 value. Use this opportunity to switch all
the pll to parameter to unsigned int. This should save us some annoying
trouble shooting when and m and n field eventually grow as well.
This patch also introduce pll multiplier range. On the g12a, the hifi and
gp0 plls are able to lock as long as the following condition is met:
55 <= m/n <= 255.
The param table describing this would be huge which is a waste of memory.
Using ranges, we can save memory. Ranges also help find the best pll
parameter significantly faster since we don't have to try all the possible
settings.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[jbrunet: fixed fix pll settings calculation with arm32]
Link: https://lkml.kernel.org/r/20190201145345.6795-2-jbrunet@baylibre.com
Initially, the meson clock directory only hosted 2 controllers drivers,
for meson8 and gxbb. At the time, both used the same set of clock drivers
so managing the dependencies was not a big concern.
Since this ancient time, entropy did its job, controllers with different
requirement and specific clock drivers have been added. Unfortunately, we
did not do a great job at managing the dependencies between the
controllers and the different clock drivers. Some drivers, such as
clk-phase or vid-pll-div, are compiled even if they are useless on the
target (meson8). As we are adding new controllers, we need to be able to
pick a driver w/o pulling the whole thing.
The patch aims to clean things up by:
* providing a dedicated CONFIG_ for each clock drivers
* allowing clock drivers to be compiled as a modules, if possible
* stating explicitly which drivers are required by each controller.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20190201125841.26785-5-jbrunet@baylibre.com
Instead of relying on a fixed names for the differents input clocks
of the controller, get them through DT.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20190116175435.4990-4-jbrunet@baylibre.com
Instead of relying on a fixed name for the xtal clock, claim the
controller input clock trough DT.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20190116175435.4990-3-jbrunet@baylibre.com
Instead of relying on a fixed name for the xtal clock, claim the
controller input clock trough DT.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20190116175435.4990-2-jbrunet@baylibre.com
Add the GPU clock tree on Meson8, Meson8b and Meson8m2.
The GPU clock tree on Meson8b and Meson8m2 is almost identical to the
one one GXBB:
- there's a glitch-free mux at HHI_MALI_CLK_CNTL[31]
- there are two identical parents for this mux: mali_0 and mali_1, each
with a gate, divider and mux
- the parents of mali_0_sel and mali_1_sel are identical to GXBB except
there's no GP0_PLL on these 32-bit SoCs
Meson8 is different because it does not have the glitch-free mux.
Instead if only has the mali_0 clock tree. The parents of mali_0_sel are
identical to the ones on Meson8b and Meson8m2.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20181208171247.22238-4-martin.blumenstingl@googlemail.com
The Meson8 SoC is slightly different compared to Meson8b and Meson8m2
because it does not have the glitch-free Mali GPU clock mux. For Meson8b
and Meson8m2 there are currently no known differences.
Add a separate clk_hw_onecell_data table for Meson8 so these differences
can be implemented. For now meson8_hw_onecell_data is a clone of our
existing meson8b_hw_onecell_data.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20181208171247.22238-3-martin.blumenstingl@googlemail.com
Add the clock subtree generating the 32k clock in amlogic axg ao block.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20181221160239.26265-6-jbrunet@baylibre.com
Replace the cec-32k clock of gxbb-ao with the simpler dual divider
driver. The dual divider implements only the dividing part. All the
other bits are now exposed using simple elements, such as gates and
muxes
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20181221160239.26265-5-jbrunet@baylibre.com
Add the dual divider driver. This special divider make a weighted
average between 2 dividers to reach fractional divider values.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20181221160239.26265-4-jbrunet@baylibre.com
Order, ids and size between the table of regmap clocks and the onecell
data table could be different.
Set regmap pointer in all the regmap clocks before starting the
registration using the onecell data, to make sure we don't
get into an incoherent situation.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20181221160239.26265-3-jbrunet@baylibre.com
* clk-fixes:
clk: qcom: qcs404: Fix gpll0_out_main parent
clk: zynqmp: Off by one in zynqmp_is_valid_clock()
clk: mmp: Off by one in mmp_clk_add()
clk: mvebu: Off by one bugs in cp110_of_clk_get()
arm64: dts: qcom: sdm845-mtp: Mark protected gcc clocks
clk: zynqmp: handle fixed factor param query error
clk: qcom: gcc: Fix board clock node name
clk: meson: axg: mark fdiv2 and fdiv3 as critical
clk: meson-gxbb: set fclk_div3 as CLK_IS_CRITICAL
clk: fixed-factor: fix of_node_get-put imbalance
- Fix GXL HDMI Pll fractional bits (from first round)
- Add the Meson8/Meson8b video clocks
- Add clk-input helper and use it for axg-audio clock driver
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=paYp
-----END PGP SIGNATURE-----
Merge tag 'meson-clk-4.21-2' of https://github.com/BayLibre/clk-meson into clk-meson
Pull more meson clk driver updates from Neil Armstrong:
- Fix GXL HDMI Pll fractional bits (from first round)
- Add the Meson8/Meson8b video clocks
- Add clk-input helper and use it for axg-audio clock driver
* tag 'meson-clk-4.21-2' of https://github.com/BayLibre/clk-meson:
clk: meson: axg-audio: use the clk input helper function
clk: meson: add clk-input helper function
clk: meson: meson8b: add the read-only video clock trees
clk: meson: meson8b: add the fractional divider for vid_pll_dco
clk: meson: meson8b: fix the offset of vid_pll_dco's N value
clk: meson: Fix GXL HDMI PLL fractional bits width
Rework the axg audio clock controller to use the new clk-input helper
function.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[narmstrong: fixed pclk input clock name to axg_audio_pclk]
Link: http://lkml.kernel.org/r/20181204165819.21541-3-jbrunet@baylibre.com
Add the clock input helper function. Several amlogic clock controllers
will now be registering bypass clock input. Instead of copying this
code in every of them, let's make an helper function for it
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
[narmstrong: fixed up to apply on Makefile and clkc.h]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20181204165819.21541-2-jbrunet@baylibre.com
These are missing 'static' so sparse complains:
drivers/clk/meson/vid-pll-div.c:58:26: warning: symbol '_get_table_val' was not declared. Should it be static?
drivers/clk/meson/gxbb.c:1585:12: warning: symbol 'gxbb_vid_pll_parent_names' was not declared. Should it be static?
drivers/clk/meson/gxbb.c:1620:12: warning: symbol 'gxbb_vclk_parent_names' was not declared. Should it be static?
drivers/clk/meson/gxbb.c:1980:12: warning: symbol 'gxbb_cts_parent_names' was not declared. Should it be static?
drivers/clk/meson/gxbb.c:2036:12: warning: symbol 'gxbb_cts_hdmi_tx_parent_names' was not declared. Should it be static?
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add all clocks to give us the final video clocks within the Meson8,
Meson8b and Meson8m2 SoCs. The final video clocks are:
- cts_enct
- cts_encl
- cts_encp
- cts_enci
- cts_vdac0
- hdmi_tx_pixel
- hdmi_sys
Add multiple clocks in between which are needed to implement these
clocks:
- Opposed to GXBB there is no pre-multiplier for the PLL input. The
assumption here is that the multiplier is required to achieve the HDMI
2.0 clock rates (which are up to twice the rate of the HDMI 1.4
rates).
- The main PLL is called "HDMI PLL" or "HPLL" in the datasheet. Rename
our existing "vid_pll_dco" to "hdmi_pll_dco". The actual VID_PLL clock
also exists further down the tree.
- Rename the existing "vid_pll" clock (which is the OD divider at
HHI_VID_PLL_CNTL[17:16]) to "hdmi_pll_lvds_out" to match the naming
from the datasheet.
- Add the second OD divider called "hdmi_pll_hdmi_out" at
HHI_VID_PLL_CNTL[19:18].
- Add the "vid_pll_in_sel" which can choose between "hdmi_pll_dco" and
another parent. However, the second parent is not use on Amlogic's
3.10 kernel for HDMI or CVBS output so just leave a TODO in the code.
- Add the "vid_pll_in_en" which is located after "vid_pll_in_sel"
according to the datasheet.
- Add "vid_pll_pre_div" which is used for divide-by-5 and divide-by-6 in
Amlogic's 3.10 kernel sources.
- Add "vid_pll_post_div" which divides the output of "vid_pll_pre_div"
further down. The Amlogic 3.10 kernel configures this as divide-by-2
with "vid_pll_pre_div" being configured as divide-by-5 to achieve a
total divider of 10.
- Add the real "vid_pll" clock which selects between "vid_pll_pre_div",
"vid_pll_post_div" and a third "vid_pll_pre_div_mult7_div2" (which is
"vid_pll_pre_div" divided by 3.5). The latter is not supported yet
because it's not used in Amlogic's 3.10 kernel. The "vid_pll" clock
rate can also be measured by clkmsr to check whether this
implementation is correct.
- Add "vid_pll_final_div" which is a post-divider for "vid_pll" and it's
used as input for "vclk" and "vclk2"
- Add the two symmetric "vclk" and "vclk" clock trees, each with a
divide-by-1, divide-by-2, divide-by-4, divide-by-6 and divide-by-12
clock and a divider for each clock.
- Add the "cts_enct", "cts_encp" and "hdmi_tx_pixel" clocks which each
have their own gate and can select between any of the five "vclk"
dividers.
- Add the "cts_encl" and "cts_vdac0" clocks which each have their own
gate and can select between any of the five "vclk2" dividers.
The "hdmi_sys" clock is a different than these video clocks. It takes
"xtal" as input (there are three more but unknown parents). Add this
clock as well as it's used by the HDMI controller. Amlogic's 3.10 kernel
always configures this as "xtal divided by 1", so we can ignore the
other parents for now.
This was tested on Meson8b and Meson8m2 boards by comparing the common
clock framework output with the clock measurer output. The following
video modes were first set in u-boot (by running "video dev open $mode")
before booting Linux:
4K2K30HZ (only supported by Meson8m2, not tested on Meson8b):
- vid_pll: 297000000Hz
- cts_encp: 297000000Hz
- hdmi_tx_pixel: 297000000Hz
1080P:
- vid_pll: 148500000Hz
- cts_encp: 148500000Hz
- hdmi_tx_pixel: 148500000Hz
720P:
- vid_pll: 148500000Hz
- cts_encp: 148500000Hz
- hdmi_tx_pixel: 74250000Hz
480P:
- vid_pll: 216000000Hz
- cts_encp: 54000000Hz
- hdmi_tx_pixel: 27000000Hz
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20181202214220.7715-4-martin.blumenstingl@googlemail.com
This "vid_pll_dco" (which should be named HDMI_PLL or - as the datasheet
calls it - HPLL) has a 12-bit wide fractional parameter at
HHI_VID_PLL_CNTL2[11:0]. Add this so we correctly calculate the rate of
this PLL when u-boot is configured for a video mode which uses this
fractional parameter.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20181202214220.7715-3-martin.blumenstingl@googlemail.com
Unlike the other PLLs on Meson8b the N value "vid_pll_dco" (a better
name would be hdmi_pll_dco or - as the datasheet calls it - HPLL) is
located at HHI_VID_PLL_CNTL[14:10] instead of [13:9].
This results in an incorrect calculation of the rate of this PLL because
the value seen by the kernel is double the actual N (divider) value.
Update the offset of the N value to fix the calculation of the PLL rate.
Fixes: 28b9fcd016 ("clk: meson8b: Add support for Meson8b clocks")
Reported-by: Jianxin Pan <jianxin.pan@amlogic.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20181202214220.7715-2-martin.blumenstingl@googlemail.com
The GXL Documentation specifies 12 bits for the Fractional bit field,
bit the last bits have a different purpose that we cannot handle right
now, so update the bitwidth to have correct fractional calculations.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[narmstrong: added comment on GXL HHI_HDMI_PLL_CNTL register shift]
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lkml.kernel.org/r/20181121111922.1277-1-narmstrong@baylibre.com
There are four CPU clock post dividers:
- ABP
- PERIPH (used for the ARM global timer and ARM TWD timer)
- AXI
- L2 DRAM
Each of these clocks consists of two clocks:
- a mux to select between "cpu_clk" divided by 2, 3, 4, 5, 6, 7 or 8
- a "_clk_dis" gate. The public S805 datasheet states that this should
be set to 1 to disable the clock, the default value is 0. There is
also a hint that these are "just in case" bits which only exist in
case the corresponding mux implementation does not allow glitch-free
parent changes (the muxes are designed in a way that the clock can
stay enabled when changing the mux). It's still good practise to
describe this clock even if we're not supposed to modify it. Thus
this uses the read-only gate ops.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20181122214017.25643-5-martin.blumenstingl@googlemail.com
The "cpu_div2" and "cpu_div3" take "cpu_in" as input and divide that by
2 or 3. The clock controller can also generate various CPU clock
post-dividers (2, 3, 4, 5, 6, 7, 8) which are derived from "cpu_clk".
When adding support for these post-dividers our clock naming could be
misleading as we have "cpu_div2" as well as "cpu_clk_div2".
Rename the existing "cpu_in" dividers so the name of the divider's
parent is part of the divider clock's name.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20181122214017.25643-4-martin.blumenstingl@googlemail.com
Some of the gate clocks are described as "just in case" bits in the
datasheet. Examples are the ABP, PERIPH, AXI and L2 DRAM clocks on
Meson8b.
The datasheet suggests that these bits are not touched. The full
explanation is:
"Set to 1 to manually disable the [...] clock when changing the mux
selection. Typically this bit is set to 0 since the clock muxes can
switch without glitches.".
This adds new read-only ops for gate clocks so we can describe these
clocks in our clock controller drivers while ensuring that we can't
accidentally modify the registers.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20181122214017.25643-3-martin.blumenstingl@googlemail.com
Currently all clocks in the CPU clock tree are marked as read-only
(using the corresponding _ro_ clk_ops). This was correct since changing
the clock tree could cause the system to lock up.
Switch all clocks to their corresponding clk_ops variant which is not
read-only to allow changing the CPU clock tree since the bug which
locked up the system is now fixed (by switching the CPU clock temporary
to run off XTAL while changing the CPU clock tree).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20181115224048.13511-7-martin.blumenstingl@googlemail.com
Changing the CPU clock requires changing various clocks including the
SYS PLL. The existing meson clk-pll and clk-regmap drivers can change
all of the relevant clocks already.
However, changing for exampe the SYS PLL is problematic because as long
as the CPU is running off a clock derived from SYS PLL changing the
latter results in a full system lockup.
Fix this system lockup by switching the CPU clock to run off the XTAL
while we are changing the any of the clocks in the CPU clock tree.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20181115224048.13511-6-martin.blumenstingl@googlemail.com
The sys_pll on the EC-100 board is configured to 1584MHz at boot
(either by u-boot, firmware or chip defaults). This is achieved by using
M = 66, N = 1 (24MHz * 66 / 1).
At boot the CPU clock is running off sys_pll divided by 2 which results
in 792MHz. Thus M = 66 is considered to be a "safe" value for Meson8b.
To achieve 1608MHz (one of the CPU OPPs on Meson8 and Meson8m2) we need
M = 67, N = 1. I ran "stress --cpu 4" while infinitely cycling through
all available frequencies on my Meson8m2 board and could not spot any
issues with this setting (after ~12 hours of running this).
On Meson8, Meson8b and Meson8m2 we also want to be able to use 408MHz
and 816MHz CPU frequencies. These can be achieved by dividing sys_pll by
4 (for 408MHz) or 2 (for 816MHz). That means that sys_pll has to run at
1632MHz which can be generated using M = 68, N = 1.
Similarily we also want to be able to use 1008MHz as CPU frequency. This
means that sys_pll has to run either at 1008MHz or 2016MHz. The former
would result in an M value of 42, which is lower than the smallest value
used by the 3.10 GPL kernel sources from Amlogic (50 is the lower limit
there). Thus we need to run sys_pll at 2016MHz which can ge generated
using M = 84, N = 1.
I tested M = 68 and M = 84 on my Meson8b Odroid-C1 and my Meson8m2 board
by running "stress --cpu 4" while infinitely cycling thorugh all
available frequencies. I could not spot any issues after ~12 hours of
running this.
Amlogic's 3.10 GPL kernel sources have more M/N combinations. I did not
add them yet because M = 74 (to achieve close to 1800MHz on Meson8) and
M = 82 (to achieve close to 1992MHz on Meson8 as well) caused my
Meson8m2 board to hang randomly. It's not clear why this is (for example
because the board's voltage regulator design is bad, some missing bits
for these values in our clk-pll driver, etc.). Thus the following M
values from the Amlogic 3.10 GPL kernel sources are skipped as of now:
69, 70, 71, 72, 73, 74, 76, 78, 80, 82, 84, 86, 88, 90, 92, 94, 96, 98
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20181115224048.13511-5-martin.blumenstingl@googlemail.com
We don't want the common clock framework to disable the "cpu_clk" if
it's not used by any device. The cpufreq-dt driver does not enable the
CPU clocks. However, even if it would we would still want the CPU clock
to be enabled at all times because the CPU clock is also required even
if we disable CPU frequency scaling on a specific board.
The reason why we want the CPU clock to be enabled is a clock further up
in the tree:
Since commit 6f888e7bc7bd58 ("clk: meson: clk-pll: add enable bit") the
sys_pll can be disabled. However, since the CPU clock is derived from
sys_pll we don't want sys_pll to get disabled. The common clock
framework takes care of that for us by enabling all parent clocks of our
CPU clock when we mark the CPU clock with CLK_IS_CRITICAL.
Until now this is not a problem yet because all clocks in the CPU
clock's tree (including sys_pll) are read-only. However, once we allow
modifications to the clocks in that tree we will need this.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20181115224048.13511-4-martin.blumenstingl@googlemail.com
The cpu_div3 clock (cpu_in divided by 3) generates a signal with a duty
cycle of 33%. The CPU clock however requires a clock signal with a duty
cycle of 50% to run stable.
cpu_div3 was observed to be problematic when cycling through all
available CPU frequencies (with additional patches on top of this one)
while running "stress --cpu 4" in the background. This caused sporadic
hangs where the whole system would fully lock up.
Amlogic's 3.10 kernel code also does not use the cpu_div3 clock either
when changing the CPU clock.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20181115224048.13511-3-martin.blumenstingl@googlemail.com
Since commit 6f888e7bc7bd58 ("clk: meson: clk-pll: add enable bit") our
PLLs also support the "enable" bit. Currently meson_clk_pll_enable
unconditionally resets the PLL, enables it, takes it out of reset and
waits until it is locked.
This works fine for our current clock trees. However, there will be a
problem once we allow modifications to sys_pll on Meson8, Meson8b and
Meson8m2 (which will be required for CPU frequency scaling):
the CPU clock is derived from the sys_pll clock. Once clk_enable is
called on the CPU clock this will be propagated by the common clock
framework up until the sys_pll clock. If we reset the PLL
unconditionally in meson_clk_pll_enable the CPU will be stopped (on
Meson8, Meson8b and Meson8m2).
To prevent this we simply check if the PLL is already enabled and do
reset the PLL if it's already enabled and locked.
Now that we have a utility function to check whether the PLL is enabled
we can also pass that to our clk_ops to let the common clock framework
know about the status of the hardware clock.
For now this is of limited use since the only common clock framework's
internal "disabled unused clocks" mechanism checks for this. Everything
else still uses the ref-counting (internal to the common clock
framework) when clk_enable is called.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20181115224048.13511-2-martin.blumenstingl@googlemail.com
