If PCID is not exposed to the guest, clear INVPCID in the guest's CPUID
even if the VMCS INVPCID enable is not supported. This will allow
consolidating the secondary execution control adjustment code without
having to special case INVPCID.
Technically, this fixes a bug where !CPUID.PCID && CPUID.INVCPID would
result in unexpected guest behavior (#UD instead of #GP/#PF), but KVM
doesn't support exposing INVPCID if it's not supported in the VMCS, i.e.
such a config is broken/bogus no matter what.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923165048.20486-3-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename helpers for a few controls to conform to the more prevelant style
of cpu_has_vmx_<feature>(). Consistent names will allow adding macros
to consolidate the boilerplate code for adjusting secondary execution
controls.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923165048.20486-2-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The 'arch_haltpoll_disable' is used to disable guest halt poll.
Correct the comments.
Fixes: a1c4423b02 ("cpuidle-haltpoll: disable host side polling when kvm virtualized")
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20200924155800.4939-1-liq3ea@163.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use kvm_vcpu_is_illegal_gpa() to check for a legal GPA when validating a
PT output base instead of open coding a clever, but difficult to read,
variant. Code readability is far more important than shaving a few uops
in a slow path.
No functional change intended.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200924194250.19137-6-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename kvm_mmu_is_illegal_gpa() to kvm_vcpu_is_illegal_gpa() and move it
to cpuid.h so that's it's colocated with cpuid_maxphyaddr(). The helper
is not MMU specific and will gain a user that is completely unrelated to
the MMU in a future patch.
No functional change intended.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200924194250.19137-5-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace the subtly not-a-constant MSR_IA32_RTIT_OUTPUT_BASE_MASK with a
proper helper function to check whether or not the specified base is
valid. Blindly referencing the local 'vcpu' is especially nasty.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200924194250.19137-4-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stop exporting cpuid_query_maxphyaddr() now that it's not being abused
by VMX.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200924194250.19137-3-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use cpuid_maxphyaddr() instead of cpuid_query_maxphyaddr() for the
RTIT base MSR check. There is no reason to recompute MAXPHYADDR as the
precomputed version is synchronized with CPUID updates, and
MSR_IA32_RTIT_OUTPUT_BASE is not written between stuffing CPUID and
refreshing vcpu->arch.maxphyaddr.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200924194250.19137-2-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The INVD instruction is emulated as a NOP, just skip the instruction
instead.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <addd41be2fbf50f5f4059e990a2a0cff182d2136.1600972918.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Very similar content is present in four comments in sev.c. Unfortunately
there are small differences that make it harder to place the comment
in sev_clflush_pages itself, but at least we can make it more concise.
Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The LAUNCH_SECRET command performs encryption of the
launch secret memory contents. Mark pinned pages as
dirty, before unpinning them.
This matches the logic in sev_launch_update_data().
Signed-off-by: Cfir Cohen <cfir@google.com>
Message-Id: <20200808003746.66687-1-cfir@google.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add tracepoints for the early consistency checks in nested_vmx_run().
The "VMLAUNCH vs. VMRESUME" check in particular is useful to trace, as
there is no architectural way to check VMCS.LAUNCH_STATE, and subtle
bugs such as VMCLEAR on the wrong HPA can lead to confusing errors in
the L1 VMM.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200812180615.22372-1-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 761e416934 created a wrong mask for the
CR3 MBZ bits. According to APM vol 2, only the upper 12 bits are MBZ.
Fixes: 761e416934 ("KVM: nSVM: Check that MBZ bits in CR3 and CR4 are not set on vmrun of nested guests", 2020-07-08)
Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Message-Id: <20200829004824.4577-2-krish.sadhukhan@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Per Intel's SDM, RDPID takes a #UD if it is unsupported, which is more or
less what KVM is emulating when MSR_TSC_AUX is not available. In fact,
there are no scenarios in which RDPID is supposed to #GP.
Fixes: fb6d4d340e ("KVM: x86: emulate RDPID")
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Message-Id: <1598581422-76264-1-git-send-email-robert.hu@linux.intel.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On successful nested VM-Enter, check for pending interrupts and convert
the highest priority interrupt to a pending posted interrupt if it
matches L2's notification vector. If the vCPU receives a notification
interrupt before nested VM-Enter (assuming L1 disables IRQs before doing
VM-Enter), the pending interrupt (for L1) should be recognized and
processed as a posted interrupt when interrupts become unblocked after
VM-Enter to L2.
This fixes a bug where L1/L2 will get stuck in an infinite loop if L1 is
trying to inject an interrupt into L2 by setting the appropriate bit in
L2's PIR and sending a self-IPI prior to VM-Enter (as opposed to KVM's
method of manually moving the vector from PIR->vIRR/RVI). KVM will
observe the IPI while the vCPU is in L1 context and so won't immediately
morph it to a posted interrupt for L2. The pending interrupt will be
seen by vmx_check_nested_events(), cause KVM to force an immediate exit
after nested VM-Enter, and eventually be reflected to L1 as a VM-Exit.
After handling the VM-Exit, L1 will see that L2 has a pending interrupt
in PIR, send another IPI, and repeat until L2 is killed.
Note, posted interrupts require virtual interrupt deliveriy, and virtual
interrupt delivery requires exit-on-interrupt, ergo interrupts will be
unconditionally unmasked on VM-Enter if posted interrupts are enabled.
Fixes: 705699a139 ("KVM: nVMX: Enable nested posted interrupt processing")
Cc: stable@vger.kernel.org
Cc: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200812175129.12172-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add trace_kvm_cr_write and trace_kvm_cr_read for svm.
Signed-off-by: Haiwei Li <lihaiwei@tencent.com>
Message-Id: <f3031602-db3b-c4fe-b719-d402663b0a2b@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Analyze is_guest_mode() in svm_vcpu_run() instead of svm_exit_handlers_fastpath()
in conformity with VMX version.
Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1600066548-4343-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rework NMI VM-Exit handling to invoke the kernel handler by function
call instead of INTn. INTn microcode is relatively expensive, and
aligning the IRQ and NMI handling will make it easier to update KVM
should some newfangled method for invoking the handlers come along.
Suggested-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200915191505.10355-3-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the asm blob that invokes the appropriate IRQ handler after VM-Exit
into a proper subroutine. Unconditionally create a stack frame in the
subroutine so that, as objtool sees things, the function has standard
stack behavior. The dynamic stack adjustment makes using unwind hints
problematic.
Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200915191505.10355-2-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace the existing kvm_x86_ops.need_emulation_on_page_fault() with a
more generic is_emulatable(), and unconditionally call the new function
in x86_emulate_instruction().
KVM will use the generic hook to support multiple security related
technologies that prevent emulation in one way or another. Similar to
the existing AMD #NPF case where emulation of the current instruction is
not possible due to lack of information, AMD's SEV-ES and Intel's SGX
and TDX will introduce scenarios where emulation is impossible due to
the guest's register state being inaccessible. And again similar to the
existing #NPF case, emulation can be initiated by kvm_mmu_page_fault(),
i.e. outside of the control of vendor-specific code.
While the cause and architecturally visible behavior of the various
cases are different, e.g. SGX will inject a #UD, AMD #NPF is a clean
resume or complete shutdown, and SEV-ES and TDX "return" an error, the
impact on the common emulation code is identical: KVM must stop
emulation immediately and resume the guest.
Query is_emulatable() in handle_ud() as well so that the
force_emulation_prefix code doesn't incorrectly modify RIP before
calling emulate_instruction() in the absurdly unlikely scenario that
KVM encounters forced emulation in conjunction with "do not emulate".
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200915232702.15945-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use __GFP_ZERO while alloc_page().
Signed-off-by: Haiwei Li <lihaiwei@tencent.com>
Message-Id: <20200916083621.5512-1-lihaiwei.kernel@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, prepare_vmcs02_early() does not check if the "unrestricted guest"
VM-execution control in vmcs12 is turned off and leaves the corresponding
bit on in vmcs02. Due to this setting, vmentry checks which are supposed to
render the nested guest state as invalid when this VM-execution control is
not set, are passing in hardware.
This patch turns off the "unrestricted guest" VM-execution control in vmcs02
if vmcs12 has turned it off.
Suggested-by: Jim Mattson <jmattson@google.com>
Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Message-Id: <20200921081027.23047-2-krish.sadhukhan@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
MSR reads/writes should always access the L1 state, since the (nested)
hypervisor should intercept all the msrs it wants to adjust, and these
that it doesn't should be read by the guest as if the host had read it.
However IA32_TSC is an exception. Even when not intercepted, guest still
reads the value + TSC offset.
The write however does not take any TSC offset into account.
This is documented in Intel's SDM and seems also to happen on AMD as well.
This creates a problem when userspace wants to read the IA32_TSC value and then
write it. (e.g for migration)
In this case it reads L2 value but write is interpreted as an L1 value.
To fix this make the userspace initiated reads of IA32_TSC return L1 value
as well.
Huge thanks to Dave Gilbert for helping me understand this very confusing
semantic of MSR writes.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200921103805.9102-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The following intercept bit has been added to support VMEXIT
for INVPCID instruction:
Code Name Cause
A2h VMEXIT_INVPCID INVPCID instruction
The following bit has been added to the VMCB layout control area
to control intercept of INVPCID:
Byte Offset Bit(s) Function
14h 2 intercept INVPCID
Enable the interceptions when the the guest is running with shadow
page table enabled and handle the tlbflush based on the invpcid
instruction type.
For the guests with nested page table (NPT) support, the INVPCID
feature works as running it natively. KVM does not need to do any
special handling in this case.
AMD documentation for INVPCID feature is available at "AMD64
Architecture Programmer’s Manual Volume 2: System Programming,
Pub. 24593 Rev. 3.34(or later)"
The documentation can be obtained at the links below:
Link: https://www.amd.com/system/files/TechDocs/24593.pdf
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <159985255929.11252.17346684135277453258.stgit@bmoger-ubuntu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
INVPCID instruction handling is mostly same across both VMX and
SVM. So, move the code to common x86.c.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <159985255212.11252.10322694343971983487.stgit@bmoger-ubuntu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Handling of kvm_read/write_guest_virt*() errors can be moved to common
code. The same code can be used by both VMX and SVM.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <159985254493.11252.6603092560732507607.stgit@bmoger-ubuntu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The new intercept bits have been added in vmcb control area to support
few more interceptions. Here are the some of them.
- INTERCEPT_INVLPGB,
- INTERCEPT_INVLPGB_ILLEGAL,
- INTERCEPT_INVPCID,
- INTERCEPT_MCOMMIT,
- INTERCEPT_TLBSYNC,
Add a new intercept word in vmcb_control_area to support these instructions.
Also update kvm_nested_vmrun trace function to support the new addition.
AMD documentation for these instructions is available at "AMD64
Architecture Programmer’s Manual Volume 2: System Programming, Pub. 24593
Rev. 3.34(or later)"
The documentation can be obtained at the links below:
Link: https://www.amd.com/system/files/TechDocs/24593.pdf
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <159985251547.11252.16994139329949066945.stgit@bmoger-ubuntu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert all the intercepts to one array of 32 bit vectors in
vmcb_control_area. This makes it easy for future intercept vector
additions. Also update trace functions.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <159985250813.11252.5736581193881040525.stgit@bmoger-ubuntu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Modify intercept_exceptions to generic intercepts in vmcb_control_area. Use
the generic vmcb_set_intercept, vmcb_clr_intercept and vmcb_is_intercept to
set/clear/test the intercept_exceptions bits.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <159985250037.11252.1361972528657052410.stgit@bmoger-ubuntu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Modify intercept_dr to generic intercepts in vmcb_control_area. Use
the generic vmcb_set_intercept, vmcb_clr_intercept and vmcb_is_intercept
to set/clear/test the intercept_dr bits.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <159985249255.11252.10000868032136333355.stgit@bmoger-ubuntu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Change intercept_cr to generic intercepts in vmcb_control_area.
Use the new vmcb_set_intercept, vmcb_clr_intercept and vmcb_is_intercept
where applicable.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <159985248506.11252.9081085950784508671.stgit@bmoger-ubuntu>
[Change constant names. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is in preparation for the future intercept vector additions.
Add new functions vmcb_set_intercept, vmcb_clr_intercept and vmcb_is_intercept
using kernel APIs __set_bit, __clear_bit and test_bit espectively.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <159985247876.11252.16039238014239824460.stgit@bmoger-ubuntu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
host_intercept_exceptions is not used anywhere. Clean it up.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <159985252277.11252.8819848322175521354.stgit@bmoger-ubuntu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Kernel coding style suggests not to use labels like error1,error2
Suggested-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200827171145.374620-6-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Another small refactoring.
Suggested-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200827171145.374620-5-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace svm_vcpu_init_msrpm with svm_vcpu_alloc_msrpm, that also allocates
the msr bitmap and add svm_vcpu_free_msrpm to free it.
This will be used later to move the nested msr permission bitmap allocation
to nested.c
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200827171145.374620-4-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is to be more consistient with VMX, and to support
upcoming addition of vmcb02
Hopefully no functional changes.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200827171145.374620-3-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The 'page' is to hold the vcpu's vmcb so name it as such to
avoid confusion.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20200827171145.374620-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All the checks in lapic_timer_int_injected(), __kvm_wait_lapic_expire(), and
these function calls waste cpu cycles when the timer mode is not tscdeadline.
We can observe ~1.3% world switch time overhead by kvm-unit-tests/vmexit.flat
vmcall testing on AMD server. This patch reduces the world switch latency
caused by timer_advance_ns feature when the timer mode is not tscdeadline by
simpling move the check against apic->lapic_timer.expired_tscdeadline much
earlier.
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1599731444-3525-7-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The kick after setting KVM_REQ_PENDING_TIMER is used to handle the timer
fires on a different pCPU which vCPU is running on. This kick costs about
1000 clock cycles and we don't need this when injecting already-expired
timer or when using the VMX preemption timer because
kvm_lapic_expired_hv_timer() is called from the target vCPU.
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1599731444-3525-6-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check apic_lvtt_tscdeadline() mode directly instead of apic_lvtt_oneshot()
and apic_lvtt_period() to guarantee the timer is in tsc-deadline mode when
wrmsr MSR_IA32_TSCDEADLINE.
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1599731444-3525-3-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Return 0 when getting the tscdeadline timer if the lapic is hw disabled.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1599731444-3525-2-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is missing apic map recalculation after updating DFR, if it is
INIT RESET, in x2apic mode, local apic is software enabled before.
This patch fix it by introducing the function kvm_apic_set_dfr() to
be called in INIT RESET handling path.
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1597827327-25055-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The nested VMX controls MSRs can be initialized by the global capability
values stored in vmcs_config.
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200828085622.8365-6-chenyi.qiang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM supports the nested VM_{EXIT, ENTRY}_LOAD_IA32_PERF_GLOBAL_CTRL and
VM_{ENTRY_LOAD, EXIT_CLEAR}_BNDCFGS, but they are not exposed by the
system ioctl KVM_GET_MSR. Add them to the setup of nested VMX controls MSR.
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <20200828085622.8365-2-chenyi.qiang@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The save and ctl pointers are passed uninitialized to kfree() when
svm_set_nested_state() follows the 'goto out_set_gif' path. While the
issue could've been fixed by initializing these on-stack varialbles to
NULL, it seems preferable to eliminate 'out_set_gif' label completely as
it is not actually a failure path and duplicating a single svm_set_gif()
call doesn't look too bad.
[ bp: Drop obscure Addresses-Coverity: tag. ]
Fixes: 6ccbd29ade ("KVM: SVM: nested: Don't allocate VMCB structures on stack")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: Joerg Roedel <jroedel@suse.de>
Reported-by: Colin King <colin.king@canonical.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lkml.kernel.org/r/20200914133725.650221-1-vkuznets@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the architecture independent version of hyperv-tlfs.h, commit c55a844f46
removed the "X64" in the symbol names so they would make sense for both x86 and
ARM64. That commit added aliases with the "X64" in the x86 version of hyperv-tlfs.h
so that existing x86 code would continue to compile.
As a cleanup, update the x86 code to use the symbols without the "X64", then remove
the aliases. There's no functional change.
Signed-off-by: Joseph Salisbury <joseph.salisbury@microsoft.com>
Link: https://lore.kernel.org/r/1601130386-11111-1-git-send-email-jsalisbury@linux.microsoft.com
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Switching the DMAR and HPET MSI code to use the generic MSI domain ops
missed to add the flag which tells the core code to update the domain
operations with the defaults. As a consequence the core code crashes
when an interrupt in one of those domains is allocated.
Add the missing flags.
Fixes: 9006c133a4 ("x86/msi: Use generic MSI domain ops")
Reported-by: Qian Cai <cai@redhat.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/87wo0fli8b.fsf@nanos.tec.linutronix.de
- Unbreak the magic 'search the timer interrupt' logic in IO/APIC code
which got wreckaged when the core interrupt code made the state
tracking logic stricter. That caused the interrupt line to stay masked
after switching from IO/APIC to PIC delivery mode, which obviously
prevents interrupts from being delivered.
- Make run_on_irqstack_code() typesafe. The function argument is a void
pointer which is then casted to 'void (*fun)(void *). This breaks
Control Flow Integrity checking in clang. Use proper helper functions
for the three variants reuqired.
-----BEGIN PGP SIGNATURE-----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=BcVu
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2020-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"Two fixes for the x86 interrupt code:
- Unbreak the magic 'search the timer interrupt' logic in IO/APIC
code which got wreckaged when the core interrupt code made the
state tracking logic stricter.
That caused the interrupt line to stay masked after switching from
IO/APIC to PIC delivery mode, which obviously prevents interrupts
from being delivered.
- Make run_on_irqstack_code() typesafe. The function argument is a
void pointer which is then cast to 'void (*fun)(void *).
This breaks Control Flow Integrity checking in clang. Use proper
helper functions for the three variants reuqired"
* tag 'x86-urgent-2020-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ioapic: Unbreak check_timer()
x86/irq: Make run_on_irqstack_cond() typesafe
In the architecture independent version of hyperv-tlfs.h, commit c55a844f46
removed the "X64" in the symbol names so they would make sense for both x86 and
ARM64. That commit added aliases with the "X64" in the x86 version of hyperv-tlfs.h
so that existing x86 code would continue to compile.
As a cleanup, update the x86 code to use the symbols without the "X64", then remove
the aliases. There's no functional change.
Signed-off-by: Joseph Salisbury <joseph.salisbury@microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/1601130386-11111-1-git-send-email-jsalisbury@linux.microsoft.com
If we copy less than 8 bytes and if the destination crosses a cache
line, __copy_user_flushcache would invalidate only the first cache line.
This patch makes it invalidate the second cache line as well.
Fixes: 0aed55af88 ("x86, uaccess: introduce copy_from_iter_flushcache for pmem / cache-bypass operations")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Dan Williams <dan.j.wiilliams@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/alpine.LRH.2.02.2009161451140.21915@file01.intranet.prod.int.rdu2.redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
with a better API in 5.10 or 5.11, for now this is a fix
that works with existing userspace but keeps the current
ugly API.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl9ufLMUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMe9AgAgU3YQ2SktkqEOXjHMLqCH5Y3PKFI
S2anYpoKlH36Q6kzoqtkCj0GVagvdh5+Envz3I/tMdhv3Y/JgZaX1wHAe4cUl9BT
VyoiDBTWkhYRmpUbLYA8AtmgxQw1Hp8srH86rnvVGmLG6zdAa/rgUAKiQgT688Ej
CQvF5H7Zi3viPo2rInNSkgTIgewduqSWkwJ6+h4AQMmNJpbRaeZs45yMYyyu/FIi
hUazy7Rwk2vkWcuTd/sqH9b9y3VCYpN9juRaehEiK8qxXT3ydTU4Tub25BHmvXdr
dx5pShG4P3nAGnfV1qKAemyQcY7sjfMieqN1F3QcsRcxqZgySUm11o2JRw==
=sHsX
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more kvm fixes from Paolo Bonzini:
"Five small fixes.
The nested migration bug will be fixed with a better API in 5.10 or
5.11, for now this is a fix that works with existing userspace but
keeps the current ugly API"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Add a dedicated INVD intercept routine
KVM: x86: Reset MMU context if guest toggles CR4.SMAP or CR4.PKE
KVM: x86: fix MSR_IA32_TSC read for nested migration
selftests: kvm: Fix assert failure in single-step test
KVM: x86: VMX: Make smaller physical guest address space support user-configurable
The INVD instruction intercept performs emulation. Emulation can't be done
on an SEV guest because the guest memory is encrypted.
Provide a dedicated intercept routine for the INVD intercept. And since
the instruction is emulated as a NOP, just skip it instead.
Fixes: 1654efcbc4 ("KVM: SVM: Add KVM_SEV_INIT command")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <a0b9a19ffa7fef86a3cc700c7ea01cb2731e04e5.1600972918.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use ghcb_set_sw_scratch() to set the GHCB scratch field, which will also
set the corresponding bit in the GHCB valid_bitmap field to denote that
sw_scratch is actually valid.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Link: https://lkml.kernel.org/r/ba84deabdf44a7a880454fb351d189c6ad79d4ba.1601041106.git.thomas.lendacky@amd.com
Reset the MMU context during kvm_set_cr4() if SMAP or PKE is toggled.
Recent commits to (correctly) not reload PDPTRs when SMAP/PKE are
toggled inadvertantly skipped the MMU context reset due to the mask
of bits that triggers PDPTR loads also being used to trigger MMU context
resets.
Fixes: 427890aff8 ("kvm: x86: Toggling CR4.SMAP does not load PDPTEs in PAE mode")
Fixes: cb957adb4e ("kvm: x86: Toggling CR4.PKE does not load PDPTEs in PAE mode")
Cc: Jim Mattson <jmattson@google.com>
Cc: Peter Shier <pshier@google.com>
Cc: Oliver Upton <oupton@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923215352.17756-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This API is the equivalent of alloc_pages, except that the returned memory
is guaranteed to be DMA addressable by the passed in device. The
implementation will also be used to provide a more sensible replacement
for DMA_ATTR_NON_CONSISTENT flag.
Additionally dma_alloc_noncoherent is switched over to use dma_alloc_pages
as its backend.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> (MIPS part)
MSR reads/writes should always access the L1 state, since the (nested)
hypervisor should intercept all the msrs it wants to adjust, and these
that it doesn't should be read by the guest as if the host had read it.
However IA32_TSC is an exception. Even when not intercepted, guest still
reads the value + TSC offset.
The write however does not take any TSC offset into account.
This is documented in Intel's SDM and seems also to happen on AMD as well.
This creates a problem when userspace wants to read the IA32_TSC value and then
write it. (e.g for migration)
In this case it reads L2 value but write is interpreted as an L1 value.
To fix this make the userspace initiated reads of IA32_TSC return L1 value
as well.
Huge thanks to Dave Gilbert for helping me understand this very confusing
semantic of MSR writes.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200921103805.9102-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Snow Ridge integrated PCIe3 uncore unit can be used to collect
performance data, e.g. utilization, between PCIe devices, plugged into
the PCIe port, and the components (in M2IOSF) responsible for
translating and managing requests to/from the device. The performance
data is very useful for analyzing the performance of PCIe devices.
The device with the PCIe3 uncore PMON units is owned by the portdrv_pci
driver. Create a PCI sub driver for the PCIe3 uncore PMON units.
Here are some difference between PCIe3 uncore unit and other uncore
pci units.
- There may be several Root Ports on a system. But the uncore counters
only exist in the Root Port A. A user can configure the channel mask
to collect the data from other Root Ports.
- The event format of the PCIe3 uncore unit is the same as IIO unit of
SKX.
- The Control Register of PCIe3 uncore unit is 64 bits.
- The offset of each counters is 8, which is the same as M2M unit of
SNR.
- New MSR addresses for unit control, counter and counter config.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1600094060-82746-7-git-send-email-kan.liang@linux.intel.com
Some uncore counters may be located in the configuration space of a PCI
device, which already has a bonded driver. Currently, the uncore driver
cannot register a PCI uncore PMU for these counters, because, to
register a PCI uncore PMU, the uncore driver must be bond to the device.
However, one device can only have one bonded driver.
Add an uncore PCI sub driver to support such kind of devices.
The sub driver doesn't own the device. In initialization, the sub
driver searches the device via pci_get_device(), and register the
corresponding PMU for the device. In the meantime, the sub driver
registers a PCI bus notifier, which is used to notify the sub driver
once the device is removed. The sub driver can unregister the PMU
accordingly.
The sub driver only searches the devices defined in its id table. The
id table varies on different platforms, which will be implemented in the
following platform-specific patch.
Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1600094060-82746-6-git-send-email-kan.liang@linux.intel.com
The PMU unregistration in the uncore PCI sub driver is similar as the
normal PMU unregistration for a PCI device. The codes to unregister a
PCI PMU can be shared.
Factor out uncore_pci_pmu_unregister(), which will be used later.
Use uncore_pci_get_dev_die_info() to replace the codes which retrieve
the socket and die informaion.
The pci_set_drvdata() is not included in uncore_pci_pmu_unregister() as
well, because the uncore PCI sub driver will not touch the private
driver data pointer of the device.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1600094060-82746-5-git-send-email-kan.liang@linux.intel.com
The PMU registration in the uncore PCI sub driver is similar as the
normal PMU registration for a PCI device. The codes to register a PCI
PMU can be shared.
Factor out uncore_pci_pmu_register(), which will be used later.
The pci_set_drvdata() is not included in uncore_pci_pmu_register(). The
uncore PCI sub driver doesn't own the PCI device. It will not touch the
private driver data pointer for the device.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1600094060-82746-4-git-send-email-kan.liang@linux.intel.com
When an uncore PCI sub driver gets a remove notification, the
corresponding PMU has to be retrieved and unregistered. The codes, which
find the corresponding PMU by comparing the pci_device_id table, can be
shared.
Factor out uncore_pci_find_dev_pmu(), which will be used later.
There is no functional change.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1600094060-82746-3-git-send-email-kan.liang@linux.intel.com
The socket and die information is required to register/unregister a PMU
in the uncore PCI sub driver. The codes, which get the socket and die
information from a BUS number, can be shared.
Factor out uncore_pci_get_dev_die_info(), which will be used later.
There is no functional change.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1600094060-82746-2-git-send-email-kan.liang@linux.intel.com
Previously, the uncore driver would say "NB counters detected" on F17h
machines, which don't have NorthBridge (NB) counters. They have Data
Fabric (DF) counters. Just use the pmu.name to inform users which pmu
to use and its associated counter count.
F17h dmesg BEFORE:
amd_uncore: AMD NB counters detected
amd_uncore: AMD LLC counters detected
F17h dmesg AFTER:
amd_uncore: 4 amd_df counters detected
amd_uncore: 6 amd_l3 counters detected
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200921144330.6331-5-kim.phillips@amd.com
On Family 19h, the driver checks for a populated 2-bit threadmask in
order to establish that the user wants to measure individual slices,
individual cores (only one can be measured at a time), and lets
the user also directly specify enallcores and/or enallslices if
desired.
Example F19h invocation to measure L3 accesses (event 4, umask 0xff)
by the first thread (id 0 -> mask 0x1) of the first core (id 0) on the
first slice (id 0):
perf stat -a -e instructions,amd_l3/umask=0xff,event=0x4,coreid=0,threadmask=1,sliceid=0,enallcores=0,enallslices=0/ <workload>
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200921144330.6331-4-kim.phillips@amd.com
Continue to fully populate either one of threadmask or slicemask if the
user doesn't.
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200921144330.6331-3-kim.phillips@amd.com
Replace AMD_FORMAT_ATTR with the more apropos DEFINE_UNCORE_FORMAT_ATTR
stolen from arch/x86/events/intel/uncore.h. This way we can clearly
see the bit-variants of each of the attributes that want to have
the same name across families.
Also unroll AMD_ATTRIBUTE because we are going to separately add
new attributes that differ between DF and L3.
Also clean up the if-Family 17h-else logic in amd_uncore_init.
This is basically a rewrite of commit da6adaea2b
("perf/x86/amd/uncore: Update sysfs attributes for Family17h processors").
No functional changes.
Tested F17h+ /sys/bus/event_source/devices/amd_{l3,df}/format/*
content remains unchanged:
/sys/bus/event_source/devices/amd_l3/format/event:config:0-7
/sys/bus/event_source/devices/amd_l3/format/umask:config:8-15
/sys/bus/event_source/devices/amd_df/format/event:config:0-7,32-35,59-60
/sys/bus/event_source/devices/amd_df/format/umask:config:8-15
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200921144330.6331-2-kim.phillips@amd.com
Several people reported in the kernel bugzilla that between v4.12 and v4.13
the magic which works around broken hardware and BIOSes to find the proper
timer interrupt delivery mode stopped working for some older affected
platforms which need to fall back to ExtINT delivery mode.
The reason is that the core code changed to keep track of the masked and
disabled state of an interrupt line more accurately to avoid the expensive
hardware operations.
That broke an assumption in i8259_make_irq() which invokes
disable_irq_nosync();
irq_set_chip_and_handler();
enable_irq();
Up to v4.12 this worked because enable_irq() unconditionally unmasked the
interrupt line, but after the state tracking improvements this is not
longer the case because the IO/APIC uses lazy disabling. So the line state
is unmasked which means that enable_irq() does not call into the new irq
chip to unmask it.
In principle this is a shortcoming of the core code, but it's more than
unclear whether the core code should try to reset state. At least this
cannot be done unconditionally as that would break other existing use cases
where the chip type is changed, e.g. when changing the trigger type, but
the callers expect the state to be preserved.
As the way how check_timer() is switching the delivery modes is truly
unique, the obvious fix is to simply unmask the i8259 manually after
changing the mode to ExtINT delivery and switching the irq chip to the
legacy PIC.
Note, that the fixes tag is not really precise, but identifies the commit
which broke the assumptions in the IO/APIC and i8259 code and that's the
kernel version to which this needs to be backported.
Fixes: bf22ff45be ("genirq: Avoid unnecessary low level irq function calls")
Reported-by: p_c_chan@hotmail.com
Reported-by: ecm4@mail.com
Reported-by: perdigao1@yahoo.com
Reported-by: matzes@users.sourceforge.net
Reported-by: rvelascog@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: p_c_chan@hotmail.com
Tested-by: matzes@users.sourceforge.net
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=197769
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-09-23
The following pull-request contains BPF updates for your *net-next* tree.
We've added 95 non-merge commits during the last 22 day(s) which contain
a total of 124 files changed, 4211 insertions(+), 2040 deletions(-).
The main changes are:
1) Full multi function support in libbpf, from Andrii.
2) Refactoring of function argument checks, from Lorenz.
3) Make bpf_tail_call compatible with functions (subprograms), from Maciej.
4) Program metadata support, from YiFei.
5) bpf iterator optimizations, from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch exposes allow_smaller_maxphyaddr to the user as a module parameter.
Since smaller physical address spaces are only supported on VMX, the
parameter is only exposed in the kvm_intel module.
For now disable support by default, and let the user decide if they want
to enable it.
Modifications to VMX page fault and EPT violation handling will depend
on whether that parameter is enabled.
Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
Message-Id: <20200903141122.72908-1-mgamal@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
compat_sys_mount is identical to the regular sys_mount now, so remove it
and use the native version everywhere.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Two minor conflicts:
1) net/ipv4/route.c, adding a new local variable while
moving another local variable and removing it's
initial assignment.
2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes.
One pretty prints the port mode differently, whilst another
changes the driver to try and obtain the port mode from
the port node rather than the switch node.
Signed-off-by: David S. Miller <davem@davemloft.net>
Sami reported that run_on_irqstack_cond() requires the caller to cast
functions to mismatching types, which trips indirect call Control-Flow
Integrity (CFI) in Clang.
Instead of disabling CFI on that function, provide proper helpers for
the three call variants. The actual ASM code stays the same as that is
out of reach.
[ bp: Fix __run_on_irqstack() prototype to match. ]
Fixes: 931b941459 ("x86/entry: Provide helpers for executing on the irqstack")
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Cc: <stable@vger.kernel.org>
Link: https://github.com/ClangBuiltLinux/linux/issues/1052
Link: https://lkml.kernel.org/r/87pn6eb5tv.fsf@nanos.tec.linutronix.de
FPU initialization handles them currently. However, in the case
of clearcpuid=, some other early initialization code may check for
features before the FPU initialization code is called. Handling the
argument earlier allows the command line to influence those early
initializations.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200921215638.37980-1-mh@glandium.org
- fix fault on page table writes during instruction fetch
s390:
- doc improvement
x86:
- The obvious patches are always the ones that turn out to be
completely broken. /me hangs his head in shame.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl9nyjsUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNpcAf/bsW1B+Q8QJnyfU4RSiX28lG8Ki9F
9A0aVJPW4U/x7COZuhldrQGkbHDA5agavCevghMuOqWkz2gs6ihpAGgzfG+FVIm7
2yi4k9A90kPrMSBf8qaLgvybGNO6uxGpJmv54MjHpkLPUEz+J1MuB9D6eEqBZkWz
ncOSsGS2eeUFpqulA9DCN3O3PbaFeAXPNJnDNGqxrGjV7CriosRlbK02PVxTQzvT
nuGzDgaOmmRXntIQ7hrk9DJlHm7gH2jH8TK9gB2xm0yuVm2/nNlpkY6rP6NDUdLs
OrJOzxWOcSO8HRgBhlFhED/8heTqHCJS1vMUI3M6Z62p324TjRDjRC+4ow==
=tpZU
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- fix fault on page table writes during instruction fetch
s390:
- doc improvement
x86:
- The obvious patches are always the ones that turn out to be
completely broken. /me hangs his head in shame"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
Revert "KVM: Check the allocation of pv cpu mask"
KVM: arm64: Remove S1PTW check from kvm_vcpu_dabt_iswrite()
KVM: arm64: Assume write fault on S1PTW permission fault on instruction fetch
docs: kvm: add documentation for KVM_CAP_S390_DIAG318
* Disable relocation relaxation for the compressed kernel when not built
as -pie as in that case kernels built with clang and linked with LLD
fail to boot due to the linker optimizing some instructions in non-PIE
form; the gory details in the commit message, from Arvind Sankar.
* A fix for the "bad bp value" warning issued by the frame-pointer
unwinder, from Josh Poimboeuf.
-----BEGIN PGP SIGNATURE-----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=og1U
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- A defconfig fix (Daniel Díaz)
- Disable relocation relaxation for the compressed kernel when not
built as -pie as in that case kernels built with clang and linked
with LLD fail to boot due to the linker optimizing some instructions
in non-PIE form; the gory details in the commit message (Arvind
Sankar)
- A fix for the "bad bp value" warning issued by the frame-pointer
unwinder (Josh Poimboeuf)
* tag 'x86_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/unwind/fp: Fix FP unwinding in ret_from_fork
x86/boot/compressed: Disable relocation relaxation
x86/defconfigs: Explicitly unset CONFIG_64BIT in i386_defconfig
The commit 0f99022210 ("KVM: Check the allocation of pv cpu mask") we
have in 5.9-rc5 has two issue:
1) Compilation fails for !CONFIG_SMP, see:
https://bugzilla.kernel.org/show_bug.cgi?id=209285
2) This commit completely disables PV TLB flush, see
https://lore.kernel.org/kvm/87y2lrnnyf.fsf@vitty.brq.redhat.com/
The allocation problem is likely a theoretical one, if we don't
have memory that early in boot process we're likely doomed anyway.
Let's solve it properly later.
This reverts commit 0f99022210.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In some hardware implementations, coherency between the encrypted and
unencrypted mappings of the same physical page in a VM is enforced. In
such a system, it is not required for software to flush the VM's page
from all CPU caches in the system prior to changing the value of the
C-bit for the page.
So check that bit before flushing the cache.
Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lkml.kernel.org/r/20200917212038.5090-4-krish.sadhukhan@oracle.com
- Add support for the Lakefield chip to the RAPL power capping
driver (Ricardo Neri).
- Modify the ACPI processor idle driver to prevent it from triggering
RCU-lockdep complaints which has started to happen after recent
changes in that area (Peter Zijlstra).
-----BEGIN PGP SIGNATURE-----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=gBKv
-----END PGP SIGNATURE-----
Merge tag 'pm-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add a new CPU ID to the RAPL power capping driver and prevent
the ACPI processor idle driver from triggering RCU-lockdep complaints.
Specifics:
- Add support for the Lakefield chip to the RAPL power capping driver
(Ricardo Neri).
- Modify the ACPI processor idle driver to prevent it from triggering
RCU-lockdep complaints which has started to happen after recent
changes in that area (Peter Zijlstra)"
* tag 'pm-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: processor: Take over RCU-idle for C3-BM idle
cpuidle: Allow cpuidle drivers to take over RCU-idle
ACPI: processor: Use CPUIDLE_FLAG_TLB_FLUSHED
ACPI: processor: Use CPUIDLE_FLAG_TIMER_STOP
powercap: RAPL: Add support for Lakefield
Currently the callback passed to arch_stack_walk() has an argument called
reliable passed to it to indicate if the stack entry is reliable, a comment
says that this is used by some printk() consumers. However in the current
kernel none of the arch_stack_walk() implementations ever set this flag to
true and the only callback implementation we have is in the generic
stacktrace code which ignores the flag. It therefore appears that this
flag is redundant so we can simplify and clarify things by removing it.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lore.kernel.org/r/20200914153409.25097-2-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
They do get called from the #MC handler which is already marked
"noinstr".
Commit
e2def7d49d ("x86/mce: Make mce_rdmsrl() panic on an inaccessible MSR")
already got rid of the instrumentation in the MSR accessors, fix the
annotation now too, in order to get rid of:
vmlinux.o: warning: objtool: do_machine_check()+0x4a: call to mce_rdmsrl() leaves .noinstr.text section
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200915194020.28807-1-bp@alien8.de
In some hardware implementations, coherency between the encrypted and
unencrypted mappings of the same physical page is enforced. In such a
system, it is not required for software to flush the page from all CPU
caches in the system prior to changing the value of the C-bit for the
page. So check that bit before flushing the cache.
[ bp: Massage commit message. ]
Suggested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200917212038.5090-3-krish.sadhukhan@oracle.com
In some hardware implementations, coherency between the encrypted and
unencrypted mappings of the same physical page is enforced. In such a system,
it is not required for software to flush the page from all CPU caches in the
system prior to changing the value of the C-bit for a page. This hardware-
enforced cache coherency is indicated by EAX[10] in CPUID leaf 0x8000001f.
[ bp: Use one of the free slots in word 3. ]
Suggested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200917212038.5090-2-krish.sadhukhan@oracle.com
There have been some reports of "bad bp value" warnings printed by the
frame pointer unwinder:
WARNING: kernel stack regs at 000000005bac7112 in sh:1014 has bad 'bp' value 0000000000000000
This warning happens when unwinding from an interrupt in
ret_from_fork(). If entry code gets interrupted, the state of the
frame pointer (rbp) may be undefined, which can confuse the unwinder,
resulting in warnings like the above.
There's an in_entry_code() check which normally silences such
warnings for entry code. But in this case, ret_from_fork() is getting
interrupted. It recently got moved out of .entry.text, so the
in_entry_code() check no longer works.
It could be moved back into .entry.text, but that would break the
noinstr validation because of the call to schedule_tail().
Instead, initialize each new task's RBP to point to the task's entry
regs via an encoded frame pointer. That will allow the unwinder to
reach the end of the stack gracefully.
Fixes: b9f6976bfb ("x86/entry/64: Move non entry code into .text section")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/f366bbf5a8d02e2318ee312f738112d0af74d16f.1600103007.git.jpoimboe@redhat.com
This commit serves two things:
1) it optimizes BPF prologue/epilogue generation
2) it makes possible to have tailcalls within BPF subprogram
Both points are related to each other since without 1), 2) could not be
achieved.
In [1], Alexei says:
"The prologue will look like:
nop5
xor eax,eax // two new bytes if bpf_tail_call() is used in this
// function
push rbp
mov rbp, rsp
sub rsp, rounded_stack_depth
push rax // zero init tail_call counter
variable number of push rbx,r13,r14,r15
Then bpf_tail_call will pop variable number rbx,..
and final 'pop rax'
Then 'add rsp, size_of_current_stack_frame'
jmp to next function and skip over 'nop5; xor eax,eax; push rpb; mov
rbp, rsp'
This way new function will set its own stack size and will init tail
call
counter with whatever value the parent had.
If next function doesn't use bpf_tail_call it won't have 'xor eax,eax'.
Instead it would need to have 'nop2' in there."
Implement that suggestion.
Since the layout of stack is changed, tail call counter handling can not
rely anymore on popping it to rbx just like it have been handled for
constant prologue case and later overwrite of rbx with actual value of
rbx pushed to stack. Therefore, let's use one of the register (%rcx) that
is considered to be volatile/caller-saved and pop the value of tail call
counter in there in the epilogue.
Drop the BUILD_BUG_ON in emit_prologue and in
emit_bpf_tail_call_indirect where instruction layout is not constant
anymore.
Introduce new poke target, 'tailcall_bypass' to poke descriptor that is
dedicated for skipping the register pops and stack unwind that are
generated right before the actual jump to target program.
For case when the target program is not present, BPF program will skip
the pop instructions and nop5 dedicated for jmpq $target. An example of
such state when only R6 of callee saved registers is used by program:
ffffffffc0513aa1: e9 0e 00 00 00 jmpq 0xffffffffc0513ab4
ffffffffc0513aa6: 5b pop %rbx
ffffffffc0513aa7: 58 pop %rax
ffffffffc0513aa8: 48 81 c4 00 00 00 00 add $0x0,%rsp
ffffffffc0513aaf: 0f 1f 44 00 00 nopl 0x0(%rax,%rax,1)
ffffffffc0513ab4: 48 89 df mov %rbx,%rdi
When target program is inserted, the jump that was there to skip
pops/nop5 will become the nop5, so CPU will go over pops and do the
actual tailcall.
One might ask why there simply can not be pushes after the nop5?
In the following example snippet:
ffffffffc037030c: 48 89 fb mov %rdi,%rbx
(...)
ffffffffc0370332: 5b pop %rbx
ffffffffc0370333: 58 pop %rax
ffffffffc0370334: 48 81 c4 00 00 00 00 add $0x0,%rsp
ffffffffc037033b: 0f 1f 44 00 00 nopl 0x0(%rax,%rax,1)
ffffffffc0370340: 48 81 ec 00 00 00 00 sub $0x0,%rsp
ffffffffc0370347: 50 push %rax
ffffffffc0370348: 53 push %rbx
ffffffffc0370349: 48 89 df mov %rbx,%rdi
ffffffffc037034c: e8 f7 21 00 00 callq 0xffffffffc0372548
There is the bpf2bpf call (at ffffffffc037034c) right after the tailcall
and jump target is not present. ctx is in %rbx register and BPF
subprogram that we will call into on ffffffffc037034c is relying on it,
e.g. it will pick ctx from there. Such code layout is therefore broken
as we would overwrite the content of %rbx with the value that was pushed
on the prologue. That is the reason for the 'bypass' approach.
Special care needs to be taken during the install/update/remove of
tailcall target. In case when target program is not present, the CPU
must not execute the pop instructions that precede the tailcall.
To address that, the following states can be defined:
A nop, unwind, nop
B nop, unwind, tail
C skip, unwind, nop
D skip, unwind, tail
A is forbidden (lead to incorrectness). The state transitions between
tailcall install/update/remove will work as follows:
First install tail call f: C->D->B(f)
* poke the tailcall, after that get rid of the skip
Update tail call f to f': B(f)->B(f')
* poke the tailcall (poke->tailcall_target) and do NOT touch the
poke->tailcall_bypass
Remove tail call: B(f')->C(f')
* poke->tailcall_bypass is poked back to jump, then we wait the RCU
grace period so that other programs will finish its execution and
after that we are safe to remove the poke->tailcall_target
Install new tail call (f''): C(f')->D(f'')->B(f'').
* same as first step
This way CPU can never be exposed to "unwind, tail" state.
Last but not least, when tailcalls get mixed with bpf2bpf calls, it
would be possible to encounter the endless loop due to clearing the
tailcall counter if for example we would use the tailcall3-like from BPF
selftests program that would be subprogram-based, meaning the tailcall
would be present within the BPF subprogram.
This test, broken down to particular steps, would do:
entry -> set tailcall counter to 0, bump it by 1, tailcall to func0
func0 -> call subprog_tail
(we are NOT skipping the first 11 bytes of prologue and this subprogram
has a tailcall, therefore we clear the counter...)
subprog -> do the same thing as entry
and then loop forever.
To address this, the idea is to go through the call chain of bpf2bpf progs
and look for a tailcall presence throughout whole chain. If we saw a single
tail call then each node in this call chain needs to be marked as a subprog
that can reach the tailcall. We would later feed the JIT with this info
and:
- set eax to 0 only when tailcall is reachable and this is the entry prog
- if tailcall is reachable but there's no tailcall in insns of currently
JITed prog then push rax anyway, so that it will be possible to
propagate further down the call chain
- finally if tailcall is reachable, then we need to precede the 'call'
insn with mov rax, [rbp - (stack_depth + 8)]
Tail call related cases from test_verifier kselftest are also working
fine. Sample BPF programs that utilize tail calls (sockex3, tracex5)
work properly as well.
[1]: https://lore.kernel.org/bpf/20200517043227.2gpq22ifoq37ogst@ast-mbp.dhcp.thefacebook.com/
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reflect the actual purpose of poke->ip and rename it to
poke->tailcall_target so that it will not the be confused with another
poke target that will be introduced in next commit.
While at it, do the same thing with poke->ip_stable - rename it to
poke->tailcall_target_stable.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, %rax is used to store the jump target when BPF program is
emitting the retpoline instructions that are handling the indirect
tailcall.
There is a plan to use %rax for different purpose, which is storing the
tail call counter. In order to preserve this value across the tailcalls,
adjust the BPF indirect tailcalls so that the target program will reside
in %rcx and teach the retpoline instructions about new location of jump
target.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A PASID is allocated for an "mm" the first time any thread binds to an
SVA-capable device and is freed from the "mm" when the SVA is unbound
by the last thread. It's possible for the "mm" to have different PASID
values in different binding/unbinding SVA cycles.
The mm's PASID (non-zero for valid PASID or 0 for invalid PASID) is
propagated to a per-thread PASID MSR for all threads within the mm
through IPI, context switch, or inherited. This is done to ensure that a
running thread has the right PASID in the MSR matching the mm's PASID.
[ bp: s/SVM/SVA/g; massage. ]
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/1600187413-163670-10-git-send-email-fenghua.yu@intel.com
Currently, the ENQCMD feature depends on CONFIG_IOMMU_SUPPORT. Add
X86_FEATURE_ENQCMD to the disabled features mask so that it gets
disabled when the IOMMU config option above is not enabled.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/1600187413-163670-9-git-send-email-fenghua.yu@intel.com
The IA32_PASID MSR (0xd93) contains the Process Address Space Identifier
(PASID), a 20-bit value. Bit 31 must be set to indicate the value
programmed in the MSR is valid. Hardware uses the PASID to identify a
process address space and direct responses to the right address space.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/1600187413-163670-7-git-send-email-fenghua.yu@intel.com
The ENQCMD instruction reads a PASID from the IA32_PASID MSR. The
MSR is stored in the task's supervisor XSAVE* PASID state and is
context-switched by XSAVES/XRSTORS.
[ bp: Add (in-)definite articles and massage. ]
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/1600187413-163670-6-git-send-email-fenghua.yu@intel.com
Work submission instruction comes in two flavors. ENQCMD can be called
both in ring 3 and ring 0 and always uses the contents of a PASID MSR
when shipping the command to the device. ENQCMDS allows a kernel driver
to submit commands on behalf of a user process. The driver supplies the
PASID value in ENQCMDS. There isn't any usage of ENQCMD in the kernel as
of now.
The CPU feature flag is shown as "enqcmd" in /proc/cpuinfo.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/1600187413-163670-5-git-send-email-fenghua.yu@intel.com
Fold the misaligned u64 workarounds into the main quotactl flow instead
of implementing a separate compat syscall handler.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add a helper to check if the calling syscall needs a fixup for
non-natural 64-bit type alignment in the compat ABI. This will only
return true for i386 syscalls on x86_64.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
lift the compat_s64 and compat_u64 definitions into common code using the
COMPAT_FOR_U64_ALIGNMENT symbol for the x86 special case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The new field 'dma_range_map' in struct device is used to facilitate the
use of single or multiple offsets between mapping regions of cpu addrs and
dma addrs. It subsumes the role of "dev->dma_pfn_offset" which was only
capable of holding a single uniform offset and had no region bounds
checking.
The function of_dma_get_range() has been modified so that it takes a single
argument -- the device node -- and returns a map, NULL, or an error code.
The map is an array that holds the information regarding the DMA regions.
Each range entry contains the address offset, the cpu_start address, the
dma_start address, and the size of the region.
of_dma_configure() is the typical manner to set range offsets but there are
a number of ad hoc assignments to "dev->dma_pfn_offset" in the kernel
driver code. These cases now invoke the function
dma_direct_set_offset(dev, cpu_addr, dma_addr, size).
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
[hch: various interface cleanups]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Make acpi_processor_idle() use the generic TLB flushing code.
This again removes RCU usage after rcu_idle_enter().
(XXX make every C3 invalidate TLBs, not just C3-BM)
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Because of system-specific EFI firmware limitations, EFI volatile
variables may not be capable of holding the required contents of
the Machine Owner Key (MOK) certificate store when the certificate
list grows above some size. Therefore, an EFI boot loader may pass
the MOK certs via a EFI configuration table created specifically for
this purpose to avoid this firmware limitation.
An EFI configuration table is a much more primitive mechanism
compared to EFI variables and is well suited for one-way passage
of static information from a pre-OS environment to the kernel.
This patch adds initial kernel support to recognize, parse,
and validate the EFI MOK configuration table, where named
entries contain the same data that would otherwise be provided
in similarly named EFI variables.
Additionally, this patch creates a sysfs binary file for each
EFI MOK configuration table entry found. These files are read-only
to root and are provided for use by user space utilities such as
mokutil.
A subsequent patch will load MOK certs into the trusted platform
key ring using this infrastructure.
Signed-off-by: Lenny Szubowicz <lszubowi@redhat.com>
Link: https://lore.kernel.org/r/20200905013107.10457-2-lszubowi@redhat.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Get rid of all the gunk and remove the 'select PCI_MSI_ARCH_FALLBACK' from
the x86 Kconfig so the weak functions in the PCI core are replaced by stubs
which emit a warning, which ensures that any fail to set the irq domain
pointer results in a warning when the device is used.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200826112334.086003720@linutronix.de
The arch_.*_msi_irq[s] fallbacks are compiled in whether an architecture
requires them or not. Architectures which are fully utilizing hierarchical
irq domains should never call into that code.
It's not only architectures which depend on that by implementing one or
more of the weak functions, there is also a bunch of drivers which relies
on the weak functions which invoke msi_controller::setup_irq[s] and
msi_controller::teardown_irq.
Make the architectures and drivers which rely on them select them in Kconfig
and if not selected replace them by stub functions which emit a warning and
fail the PCI/MSI interrupt allocation.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200826112333.992429909@linutronix.de
Now that interrupt remapping sets the irqdomain pointer when a PCI device
is added it's possible to store the default irq domain in the device struct
in pcibios_add_device().
If the bus to which a device is connected has an irq domain associated then
this domain is used otherwise the default domain (PCI/MSI native or XEN
PCI/MSI) is used. Using the bus domain ensures that special MSI bus domains
like VMD work.
This makes XEN and the non-remapped native case work solely based on the
irq domain pointer in struct device for PCI/MSI and allows to remove the
arch fallback and make most of the x86_msi ops private to XEN in the next
steps.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200826112333.900423047@linutronix.de
To allow utilizing the irq domain pointer in struct device it is necessary
to make XEN/MSI irq domain compatible.
While the right solution would be to truly convert XEN to irq domains, this
is an exercise which is not possible for mere mortals with limited XENology.
Provide a plain irqdomain wrapper around XEN. While this is blatant
violation of the irqdomain design, it's the only solution for a XEN igorant
person to make progress on the issue which triggered this change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20200826112333.622352798@linutronix.de
X86 cannot store the irq domain pointer in struct device without breaking
XEN because the irq domain pointer takes precedence over arch_*_msi_irqs()
fallbacks.
To achieve this XEN MSI interrupt management needs to be wrapped into an
irq domain.
Move the x86_msi ops setup into a single function to prepare for this.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20200826112333.420224092@linutronix.de
X86 cannot store the irq domain pointer in struct device without breaking
XEN because the irq domain pointer takes precedence over arch_*_msi_irqs()
fallbacks.
XENs MSI teardown relies on default_teardown_msi_irqs() which invokes
arch_teardown_msi_irq(). default_teardown_msi_irqs() is a trivial iterator
over the msi entries associated to a device.
Implement this loop in xen_teardown_msi_irqs() to prepare for removal of
the fallbacks for X86.
This is a preparatory step to wrap XEN MSI alloc/free into a irq domain
which in turn allows to store the irq domain pointer in struct device and
to use the irq domain functions directly.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20200826112333.326841410@linutronix.de
The only user is in the same file and the name is too generic because this
function is only ever used for HVM domains.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Juergen Gross<jgross@suse.com>
Link: https://lore.kernel.org/r/20200826112333.234097629@linutronix.de
No point in initializing the default PCI/MSI interrupt domain early and no
point to create it when XEN PV/HVM/DOM0 are active.
Move the initialization to pci_arch_init() and convert it to init ops so
that XEN can override it as XEN has it's own PCI/MSI management. The XEN
override comes in a later step.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200826112332.859209894@linutronix.de
Adding a function call before the first #ifdef in arch_pci_init() triggers
a 'mixed declarations and code' warning if PCI_DIRECT is enabled.
Use stub functions and move the #ifdeffery to the header file where it is
not in the way.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200826112332.767707340@linutronix.de
pci_msi_get_hwirq() and pci_msi_set_desc are not longer special. Enable the
generic MSI domain ops in the core and PCI MSI code unconditionally and get
rid of the x86 specific implementations in the X86 MSI code and in the
hyperv PCI driver.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200826112332.564274859@linutronix.de
Convert the interrupt remap drivers to retrieve the pci device from the msi
descriptor and use info::hwirq.
This is the first step to prepare x86 for using the generic MSI domain ops.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200826112332.466405395@linutronix.de
Retrieve the PCI device from the msi descriptor instead of doing so at the
call sites.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200826112332.352583299@linutronix.de
Move the UV specific fields into their own struct for readability sake. Get
rid of the #ifdeffery as it does not matter at all whether the alloc info
is a couple of bytes longer or not.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200826112332.255792469@linutronix.de
Move the IOAPIC specific fields into their own struct and reuse the common
devid. Get rid of the #ifdeffery as it does not matter at all whether the
alloc info is a couple of bytes longer or not.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200826112332.054367732@linutronix.de
struct irq_alloc_info is a horrible zoo of unnamed structs in a union. Many
of the struct fields can be generic and don't have to be type specific like
hpet_id, ioapic_id...
Provide a generic set of members to prepare for the consolidation. The goal
is to make irq_alloc_info have the same basic member as the generic
msi_alloc_info so generic MSI domain ops can be reused and yet more mess
can be avoided when (non-PCI) device MSI support comes along.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200826112331.849577844@linutronix.de
Now that the iommu implementations handle the X86_*_GET_PARENT_DOMAIN
types, consolidate the two getter functions.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200826112331.741909337@linutronix.de
irq_remapping_ir_irq_domain() is used to retrieve the remapping parent
domain for an allocation type. irq_remapping_irq_domain() is for retrieving
the actual device domain for allocating interrupts for a device.
The two functions are similar and can be unified by using explicit modes
for parent irq domain retrieval.
Add X86_IRQ_ALLOC_TYPE_IOAPIC/HPET_GET_PARENT and use it in the iommu
implementations. Drop the parent domain retrieval for PCI_MSI/X as that is
unused.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200826112331.436350257@linutronix.de
Setting the irq_set_vcpu_affinity() callback to
irq_chip_set_vcpu_affinity_parent() is a pointless exercise because the
function which utilizes it searchs the domain hierarchy to find a parent
domain which has such a callback.
Remove the useless indirection.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200826112331.250130127@linutronix.de
Composing the MSI message at the MSI chip level is wrong because the
underlying parent domain is the one which knows how the message should be
composed for the direct vector delivery or the interrupt remapping table
entry.
The interrupt remapping aware PCI/MSI chip does that already. Make the
direct delivery chip do the same and move the composition of the direct
delivery MSI message to the vector domain irq chip.
This prepares for the upcoming device MSI support to avoid having
architecture specific knowledge in the device MSI domain irq chips.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200826112331.157603198@linutronix.de
The documentation of irq_chip_compose_msi_msg() claims that with
hierarchical irq domains the first chip in the hierarchy which has an
irq_compose_msi_msg() callback is chosen. But the code just keeps
iterating after it finds a chip with a compose callback.
The x86 HPET MSI implementation relies on that behaviour, but that does not
make it more correct.
The message should always be composed at the domain which manages the
underlying resource (e.g. APIC or remap table) because that domain knows
about the required layout of the message.
On X86 the following hierarchies exist:
1) vector -------- PCI/MSI
2) vector -- IR -- PCI/MSI
The vector domain has a different message format than the IR (remapping)
domain. So obviously the PCI/MSI domain can't compose the message without
having knowledge about the parent domain, which is exactly the opposite of
what hierarchical domains want to achieve.
X86 actually has two different PCI/MSI chips where #1 has a compose
callback and #2 does not. #2 delegates the composition to the remap domain
where it belongs, but #1 does it at the PCI/MSI level.
For the upcoming device MSI support it's necessary to change this and just
let the first domain which can compose the message take care of it. That
way the top level chip does not have to worry about it and the device MSI
code does not need special knowledge about topologies. It just sets the
compose callback to NULL and lets the hierarchy pick the first chip which
has one.
Due to that the attempt to move the compose callback from the direct
delivery PCI/MSI domain to the vector domain made the system fail to boot
with interrupt remapping enabled because in the remapping case
irq_chip_compose_msi_msg() keeps iterating and choses the compose callback
of the vector domain which obviously creates the wrong format for the remap
table.
Break out of the loop when the first irq chip with a compose callback is
found and fixup the HPET code temporarily. That workaround will be removed
once the direct delivery compose callback is moved to the place where it
belongs in the vector domain.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200826112331.047917603@linutronix.de
The mcelog utility is not commonly used on AMD systems. Therefore,
errors logged only by the dev_mce_log() notifier will be missed. This
may occur if the EDAC modules are not loaded, in which case it's
preferable to print the error record by the default notifier.
However, the mce->kflags set by dev_mce_log() notifier makes the
default notifier skip over the errors assuming they are processed by
dev_mce_log().
Do not update kflags in the dev_mce_log() notifier on AMD systems.
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200903234531.162484-3-Smita.KoralahalliChannabasappa@amd.com
Back in commit:
20d51a426f ("x86/mce: Reuse one of the u16 padding fields in 'struct mce'")
a field was added to "struct mce" to save the computed error severity.
Make use of this in mce_reign() to avoid re-computing the severity
for every CPU.
In the case where the machine panics, one call to mce_severity() is
still needed in order to provide the correct message giving the reason
for the panic.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200908175519.14223-2-tony.luck@intel.com
Yunhai Zhang recently fixed a VGA software scrollback bug in commit
ebfdfeeae8 ("vgacon: Fix for missing check in scrollback handling"),
but that then made people look more closely at some of this code, and
there were more problems on the vgacon side, but also the fbcon software
scrollback.
We don't really have anybody who maintains this code - probably because
nobody actually _uses_ it any more. Sure, people still use both VGA and
the framebuffer consoles, but they are no longer the main user
interfaces to the kernel, and haven't been for decades, so these kinds
of extra features end up bitrotting and not really being used.
So rather than try to maintain a likely unused set of code, I'll just
aggressively remove it, and see if anybody even notices. Maybe there
are people who haven't jumped on the whole GUI badnwagon yet, and think
it's just a fad. And maybe those people use the scrollback code.
If that turns out to be the case, we can resurrect this again, once
we've found the sucker^Wmaintainer for it who actually uses it.
Reported-by: NopNop Nop <nopitydays@gmail.com>
Tested-by: Willy Tarreau <w@1wt.eu>
Cc: 张云海 <zhangyunhai@nsfocus.com>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The x86-64 psABI [0] specifies special relocation types
(R_X86_64_[REX_]GOTPCRELX) for indirection through the Global Offset
Table, semantically equivalent to R_X86_64_GOTPCREL, which the linker
can take advantage of for optimization (relaxation) at link time. This
is supported by LLD and binutils versions 2.26 onwards.
The compressed kernel is position-independent code, however, when using
LLD or binutils versions before 2.27, it must be linked without the -pie
option. In this case, the linker may optimize certain instructions into
a non-position-independent form, by converting foo@GOTPCREL(%rip) to $foo.
This potential issue has been present with LLD and binutils-2.26 for a
long time, but it has never manifested itself before now:
- LLD and binutils-2.26 only relax
movq foo@GOTPCREL(%rip), %reg
to
leaq foo(%rip), %reg
which is still position-independent, rather than
mov $foo, %reg
which is permitted by the psABI when -pie is not enabled.
- GCC happens to only generate GOTPCREL relocations on mov instructions.
- CLang does generate GOTPCREL relocations on non-mov instructions, but
when building the compressed kernel, it uses its integrated assembler
(due to the redefinition of KBUILD_CFLAGS dropping -no-integrated-as),
which has so far defaulted to not generating the GOTPCRELX
relocations.
Nick Desaulniers reports [1,2]:
"A recent change [3] to a default value of configuration variable
(ENABLE_X86_RELAX_RELOCATIONS OFF -> ON) in LLVM now causes Clang's
integrated assembler to emit R_X86_64_GOTPCRELX/R_X86_64_REX_GOTPCRELX
relocations. LLD will relax instructions with these relocations based
on whether the image is being linked as position independent or not.
When not, then LLD will relax these instructions to use absolute
addressing mode (R_RELAX_GOT_PC_NOPIC). This causes kernels built with
Clang and linked with LLD to fail to boot."
Patch series [4] is a solution to allow the compressed kernel to be
linked with -pie unconditionally, but even if merged is unlikely to be
backported. As a simple solution that can be applied to stable as well,
prevent the assembler from generating the relaxed relocation types using
the -mrelax-relocations=no option. For ease of backporting, do this
unconditionally.
[0] https://gitlab.com/x86-psABIs/x86-64-ABI/-/blob/master/x86-64-ABI/linker-optimization.tex#L65
[1] https://lore.kernel.org/lkml/20200807194100.3570838-1-ndesaulniers@google.com/
[2] https://github.com/ClangBuiltLinux/linux/issues/1121
[3] https://reviews.llvm.org/rGc41a18cf61790fc898dcda1055c3efbf442c14c0
[4] https://lore.kernel.org/lkml/20200731202738.2577854-1-nivedita@alum.mit.edu/
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200812004308.1448603-1-nivedita@alum.mit.edu
- Multiple stolen time fixes, with a new capability to match x86
- Fix for hugetlbfs mappings when PUD and PMD are the same level
- Fix for hugetlbfs mappings when PTE mappings are enforced
(dirty logging, for example)
- Fix tracing output of 64bit values
x86:
- nSVM state restore fixes
- Async page fault fixes
- Lots of small fixes everywhere
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl9dM5kUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroM+Iwf+LbISO7ccpPMK1kKtOeug/jZv+xQA
sVaBGRzYo+k2e0XtV8E8IV4N30FBtYSwXsbBKkMAoy2FpmMebgDWDQ7xspb6RJMS
/y8t1iqPwdOaLIkUkgc7UihSTlZm05Es3f3q6uZ9+oaM4Fe+V7xWzTUX4Oy89JO7
KcQsTD7pMqS4bfZGADK781ITR/WPgCi0aYx5s6dcwcZAQXhb1K1UKEjB8OGKnjUh
jliReJtxRA16rjF+S5aJ7L07Ce/ksrfwkI4NXJ4GxW+lyOfVNdSBJUBaZt1m7G2M
1We5+i5EjKCjuxmgtUUUfVdazpj1yl+gBGT7KKkLte9T9WZdXyDnixAbvg==
=OFb3
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"A bit on the bigger side, mostly due to me being on vacation, then
busy, then on parental leave, but there's nothing worrisome.
ARM:
- Multiple stolen time fixes, with a new capability to match x86
- Fix for hugetlbfs mappings when PUD and PMD are the same level
- Fix for hugetlbfs mappings when PTE mappings are enforced (dirty
logging, for example)
- Fix tracing output of 64bit values
x86:
- nSVM state restore fixes
- Async page fault fixes
- Lots of small fixes everywhere"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
KVM: emulator: more strict rsm checks.
KVM: nSVM: more strict SMM checks when returning to nested guest
SVM: nSVM: setup nested msr permission bitmap on nested state load
SVM: nSVM: correctly restore GIF on vmexit from nesting after migration
x86/kvm: don't forget to ACK async PF IRQ
x86/kvm: properly use DEFINE_IDTENTRY_SYSVEC() macro
KVM: VMX: Don't freeze guest when event delivery causes an APIC-access exit
KVM: SVM: avoid emulation with stale next_rip
KVM: x86: always allow writing '0' to MSR_KVM_ASYNC_PF_EN
KVM: SVM: Periodically schedule when unregistering regions on destroy
KVM: MIPS: Change the definition of kvm type
kvm x86/mmu: use KVM_REQ_MMU_SYNC to sync when needed
KVM: nVMX: Fix the update value of nested load IA32_PERF_GLOBAL_CTRL control
KVM: fix memory leak in kvm_io_bus_unregister_dev()
KVM: Check the allocation of pv cpu mask
KVM: nVMX: Update VMCS02 when L2 PAE PDPTE updates detected
KVM: arm64: Update page shift if stage 2 block mapping not supported
KVM: arm64: Fix address truncation in traces
KVM: arm64: Do not try to map PUDs when they are folded into PMD
arm64/x86: KVM: Introduce steal-time cap
...
Don't ignore return values in rsm_load_state_64/32 to avoid
loading invalid state from SMM state area if it was tampered with
by the guest.
This is primarly intended to avoid letting guest set bits in EFER
(like EFER.SVME when nesting is disabled) by manipulating SMM save area.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200827171145.374620-8-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* check that guest is 64 bit guest, otherwise the SVM related fields
in the smm state area are not defined
* If the SMM area indicates that SMM interrupted a running guest,
check that EFER.SVME which is also saved in this area is set, otherwise
the guest might have tampered with SMM save area, and so indicate
emulation failure which should triple fault the guest.
* Check that that guest CPUID supports SVM (due to the same issue as above)
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200827162720.278690-4-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This code was missing and was forcing the L2 run with L1's msr
permission bitmap
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200827162720.278690-3-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently code in svm_set_nested_state copies the current vmcb control
area to L1 control area (hsave->control), under assumption that
it mostly reflects the defaults that kvm choose, and later qemu
overrides these defaults with L2 state using standard KVM interfaces,
like KVM_SET_REGS.
However nested GIF (which is AMD specific thing) is by default is true,
and it is copied to hsave area as such.
This alone is not a big deal since on VMexit, GIF is always set to false,
regardless of what it was on VM entry. However in nested_svm_vmexit we
were first were setting GIF to false, but then we overwrite the control
fields with value from the hsave area. (including the nested GIF field
itself if GIF virtualization is enabled).
Now on normal vm entry this is not a problem, since GIF is usually false
prior to normal vm entry, and this is the value that copied to hsave,
and then restored, but this is not always the case when the nested state
is loaded as explained above.
To fix this issue, move svm_set_gif after we restore the L1 control
state in nested_svm_vmexit, so that even with wrong GIF in the
saved L1 control area, we still clear GIF as the spec says.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200827162720.278690-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Merge commit 26d05b368a ("Merge branch 'kvm-async-pf-int' into HEAD")
tried to adapt the new interrupt based async PF mechanism to the newly
introduced IDTENTRY magic but unfortunately it missed the fact that
DEFINE_IDTENTRY_SYSVEC() doesn't call ack_APIC_irq() on its own and
all DEFINE_IDTENTRY_SYSVEC() users have to call it manually.
As the result all multi-CPU KVM guest hang on boot when
KVM_FEATURE_ASYNC_PF_INT is present. The breakage went unnoticed because no
KVM userspace (e.g. QEMU) currently set it (and thus async PF mechanism
is currently disabled) but we're about to change that.
Fixes: 26d05b368a ("Merge branch 'kvm-async-pf-int' into HEAD")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200908135350.355053-3-vkuznets@redhat.com>
Tested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to SDM 27.2.4, Event delivery causes an APIC-access VM exit.
Don't report internal error and freeze guest when event delivery causes
an APIC-access exit, it is handleable and the event will be re-injected
during the next vmentry.
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1597827327-25055-2-git-send-email-wanpengli@tencent.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
svm->next_rip is reset in svm_vcpu_run() only after calling
svm_exit_handlers_fastpath(), which will cause SVM's
skip_emulated_instruction() to write a stale RIP.
We can move svm_exit_handlers_fastpath towards the end of
svm_vcpu_run(). To align VMX with SVM, keep svm_complete_interrupts()
close as well.
Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Paul K. <kronenpj@kronenpj.dyndns.org>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
[Also move vmcb_mark_all_clean before any possible write to the VMCB.
- Paolo]
Even without in-kernel LAPIC we should allow writing '0' to
MSR_KVM_ASYNC_PF_EN as we're not enabling the mechanism. In
particular, QEMU with 'kernel-irqchip=off' fails to start
a guest with
qemu-system-x86_64: error: failed to set MSR 0x4b564d02 to 0x0
Fixes: 9d3c447c72 ("KVM: X86: Fix async pf caused null-ptr-deref")
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200911093147.484565-1-vkuznets@redhat.com>
[Actually commit the version proposed by Sean Christopherson. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There may be many encrypted regions that need to be unregistered when a
SEV VM is destroyed. This can lead to soft lockups. For example, on a
host running 4.15:
watchdog: BUG: soft lockup - CPU#206 stuck for 11s! [t_virtual_machi:194348]
CPU: 206 PID: 194348 Comm: t_virtual_machi
RIP: 0010:free_unref_page_list+0x105/0x170
...
Call Trace:
[<0>] release_pages+0x159/0x3d0
[<0>] sev_unpin_memory+0x2c/0x50 [kvm_amd]
[<0>] __unregister_enc_region_locked+0x2f/0x70 [kvm_amd]
[<0>] svm_vm_destroy+0xa9/0x200 [kvm_amd]
[<0>] kvm_arch_destroy_vm+0x47/0x200
[<0>] kvm_put_kvm+0x1a8/0x2f0
[<0>] kvm_vm_release+0x25/0x30
[<0>] do_exit+0x335/0xc10
[<0>] do_group_exit+0x3f/0xa0
[<0>] get_signal+0x1bc/0x670
[<0>] do_signal+0x31/0x130
Although the CLFLUSH is no longer issued on every encrypted region to be
unregistered, there are no other changes that can prevent soft lockups for
very large SEV VMs in the latest kernel.
Periodically schedule if necessary. This still holds kvm->lock across the
resched, but since this only happens when the VM is destroyed this is
assumed to be acceptable.
Signed-off-by: David Rientjes <rientjes@google.com>
Message-Id: <alpine.DEB.2.23.453.2008251255240.2987727@chino.kir.corp.google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When kvm_mmu_get_page() gets a page with unsynced children, the spt
pagetable is unsynchronized with the guest pagetable. But the
guest might not issue a "flush" operation on it when the pagetable
entry is changed from zero or other cases. The hypervisor has the
responsibility to synchronize the pagetables.
KVM behaved as above for many years, But commit 8c8560b833
("KVM: x86/mmu: Use KVM_REQ_TLB_FLUSH_CURRENT for MMU specific flushes")
inadvertently included a line of code to change it without giving any
reason in the changelog. It is clear that the commit's intention was to
change KVM_REQ_TLB_FLUSH -> KVM_REQ_TLB_FLUSH_CURRENT, so we don't
needlessly flush other contexts; however, one of the hunks changed
a nearby KVM_REQ_MMU_SYNC instead. This patch changes it back.
Link: https://lore.kernel.org/lkml/20200320212833.3507-26-sean.j.christopherson@intel.com/
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Message-Id: <20200902135421.31158-1-jiangshanlai@gmail.com>
fixes: 8c8560b833 ("KVM: x86/mmu: Use KVM_REQ_TLB_FLUSH_CURRENT for MMU specific flushes")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A minor fix for the update of VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL field
in exit_ctls_high.
Fixes: 03a8871add ("KVM: nVMX: Expose load IA32_PERF_GLOBAL_CTRL
VM-{Entry,Exit} control")
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200828085622.8365-5-chenyi.qiang@intel.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
check the allocation of per-cpu __pv_cpu_mask. Initialize ops only when
successful.
Signed-off-by: Haiwei Li <lihaiwei@tencent.com>
Message-Id: <d59f05df-e6d3-3d31-a036-cc25a2b2f33f@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When L2 uses PAE, L0 intercepts of L2 writes to CR0/CR3/CR4 call
load_pdptrs to read the possibly updated PDPTEs from the guest
physical address referenced by CR3. It loads them into
vcpu->arch.walk_mmu->pdptrs and sets VCPU_EXREG_PDPTR in
vcpu->arch.regs_dirty.
At the subsequent assumed reentry into L2, the mmu will call
vmx_load_mmu_pgd which calls ept_load_pdptrs. ept_load_pdptrs sees
VCPU_EXREG_PDPTR set in vcpu->arch.regs_dirty and loads
VMCS02.GUEST_PDPTRn from vcpu->arch.walk_mmu->pdptrs[]. This all works
if the L2 CRn write intercept always resumes L2.
The resume path calls vmx_check_nested_events which checks for
exceptions, MTF, and expired VMX preemption timers. If
vmx_check_nested_events finds any of these conditions pending it will
reflect the corresponding exit into L1. Live migration at this point
would also cause a missed immediate reentry into L2.
After L1 exits, vmx_vcpu_run calls vmx_register_cache_reset which
clears VCPU_EXREG_PDPTR in vcpu->arch.regs_dirty. When L2 next
resumes, ept_load_pdptrs finds VCPU_EXREG_PDPTR clear in
vcpu->arch.regs_dirty and does not load VMCS02.GUEST_PDPTRn from
vcpu->arch.walk_mmu->pdptrs[]. prepare_vmcs02 will then load
VMCS02.GUEST_PDPTRn from vmcs12->pdptr0/1/2/3 which contain the stale
values stored at last L2 exit. A repro of this bug showed L2 entering
triple fault immediately due to the bad VMCS02.GUEST_PDPTRn values.
When L2 is in PAE paging mode add a call to ept_load_pdptrs before
leaving L2. This will update VMCS02.GUEST_PDPTRn if they are dirty in
vcpu->arch.walk_mmu->pdptrs[].
Tested:
kvm-unit-tests with new directed test: vmx_mtf_pdpte_test.
Verified that test fails without the fix.
Also ran Google internal VMM with an Ubuntu 16.04 4.4.0-83 guest running a
custom hypervisor with a 32-bit Windows XP L2 guest using PAE. Prior to fix
would repro readily. Ran 14 simultaneous L2s for 140 iterations with no
failures.
Signed-off-by: Peter Shier <pshier@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20200820230545.2411347-1-pshier@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Multiple stolen time fixes, with a new capability to match x86
- Fix for hugetlbfs mappings when PUD and PMD are the same level
- Fix for hugetlbfs mappings when PTE mappings are enforced
(dirty logging, for example)
- Fix tracing output of 64bit values
-----BEGIN PGP SIGNATURE-----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=VBrL
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for Linux 5.9, take #1
- Multiple stolen time fixes, with a new capability to match x86
- Fix for hugetlbfs mappings when PUD and PMD are the same level
- Fix for hugetlbfs mappings when PTE mappings are enforced
(dirty logging, for example)
- Fix tracing output of 64bit values
Just merge these helpers into the main dma_direct_{alloc,free} routines,
as the additional checks are always false for the two callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
If an exception needs to be handled while reading an MSR - which is in
most of the cases caused by a #GP on a non-existent MSR - then this
is most likely the incarnation of a BIOS or a hardware bug. Such bug
violates the architectural guarantee that MCA banks are present with all
MSRs belonging to them.
The proper fix belongs in the hardware/firmware - not in the kernel.
Handling an #MC exception which is raised while an NMI is being handled
would cause the nasty NMI nesting issue because of the shortcoming of
IRET of reenabling NMIs when executed. And the machine is in an #MC
context already so <Deity> be at its side.
Tracing MSR accesses while in #MC is another no-no due to tracing being
inherently a bad idea in atomic context:
vmlinux.o: warning: objtool: do_machine_check()+0x4a: call to mce_rdmsrl() leaves .noinstr.text section
so remove all that "additional" functionality from mce_rdmsrl() and
provide it with a special exception handler which panics the machine
when that MSR is not accessible.
The exception handler prints a human-readable message explaining what
the panic reason is but, what is more, it panics while in the #GP
handler and latter won't have executed an IRET, thus opening the NMI
nesting issue in the case when the #MC has happened while handling
an NMI. (#MC itself won't be reenabled until MCG_STATUS hasn't been
cleared).
Suggested-by: Andy Lutomirski <luto@kernel.org>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
[ Add missing prototypes for ex_handler_* ]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20200906212130.GA28456@zn.tnic
x86_64 zero extends 32bit operations, so for 64bit operands,
XORL r32,r32 is functionally equal to XORQ r64,r64, but avoids
a REX prefix byte when legacy registers are used.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
x86_64 zero extends 32bit operations, so for 64bit operands,
XORL r32,r32 is functionally equal to XORL r64,r64, but avoids
a REX prefix byte when legacy registers are used.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Make sure the machine supports RDRAND, otherwise there is no trusted
source of randomness in the system.
To also check this in the pre-decompression stage, make has_cpuflag()
not depend on CONFIG_RANDOMIZE_BASE anymore.
Signed-off-by: Martin Radev <martin.b.radev@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20200907131613.12703-73-joro@8bytes.org
Calling down to EFI runtime services can result in the firmware
performing VMGEXIT calls. The firmware is likely to use the GHCB of the
OS (e.g., for setting EFI variables), so each GHCB in the system needs
to be identity-mapped in the EFI page tables, as unencrypted, to avoid
page faults.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
[ jroedel@suse.de: Moved GHCB mapping loop to sev-es.c ]
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lkml.kernel.org/r/20200907131613.12703-72-joro@8bytes.org
Commit
0c2a3913d6 ("x86/fpu: Parse clearcpuid= as early XSAVE argument")
changed clearcpuid parsing from __setup() to cmdline_find_option().
While the __setup() function would have been called for each clearcpuid=
parameter on the command line, cmdline_find_option() will only return
the last one, so the change effectively made it impossible to disable
more than one bit.
Allow a comma-separated list of bit numbers as the argument for
clearcpuid to allow multiple bits to be disabled again. Log the bits
being disabled for informational purposes.
Also fix the check on the return value of cmdline_find_option(). It
returns -1 when the option is not found, so testing as a boolean is
incorrect.
Fixes: 0c2a3913d6 ("x86/fpu: Parse clearcpuid= as early XSAVE argument")
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907213919.2423441-1-nivedita@alum.mit.edu
Unwind hints are useful to provide objtool with information about stack
states in non-standard functions/code.
While the type of information being provided might be very arch
specific, the mechanism to provide the information can be useful for
other architectures.
Move the relevant unwint hint definitions for all architectures to
see.
[ jpoimboe: REGS_IRET -> REGS_PARTIAL ]
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Header frame.h is getting more code annotations to help objtool analyze
object files.
Rename the file to objtool.h.
[ jpoimboe: add objtool.h to MAINTAINERS ]
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Compiler is not happy about one function prototype:
CC kernel/dma/swiotlb.o
kernel/dma/swiotlb.c:275:1: warning: no previous prototype for ‘swiotlb_late_init_with_default_size’ [-Wmissing-prototypes]
275 | swiotlb_late_init_with_default_size(size_t default_size)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Since it's used outside of the module, move its declaration to the header
from the user.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Stephane Eranian found a bug in that IBS' current Fetch counter was not
being reset when the driver would write the new value to clear it along
with the enable bit set, and found that adding an MSR write that would
first disable IBS Fetch would make IBS Fetch reset its current count.
Indeed, the PPR for AMD Family 17h Model 31h B0 55803 Rev 0.54 - Sep 12,
2019 states "The periodic fetch counter is set to IbsFetchCnt [...] when
IbsFetchEn is changed from 0 to 1."
Explicitly set IbsFetchEn to 0 and then to 1 when re-enabling IBS Fetch,
so the driver properly resets the internal counter to 0 and IBS
Fetch starts counting again.
A family 15h machine tested does not have this problem, and the extra
wrmsr is also not needed on Family 19h, so only do the extra wrmsr on
families 16h through 18h.
Reported-by: Stephane Eranian <stephane.eranian@google.com>
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
[peterz: optimized]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537
Family 19h RAPL support did not change from Family 17h; extend
the existing Fam17h support to work on Family 19h too.
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200908214740.18097-8-kim.phillips@amd.com
IBS hardware with the OpCntExt feature gets a 7-bit wider internal
counter. Both the maximum and current count bitfields in the
IBS_OP_CTL register are extended to support reading and writing it.
No changes are necessary to the driver for handling the extra
contiguous current count bits (IbsOpCurCnt), as the driver already
passes through 32 bits of that field. However, the driver has to do
some extra bit manipulation when converting from a period to the
non-contiguous (although conveniently aligned) extra bits in the
IbsOpMaxCnt bitfield.
This decreases IBS Op interrupt overhead when the period is over
1,048,560 (0xffff0), which would previously activate the driver's
software counter. That threshold is now 134,217,712 (0x7fffff0).
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200908214740.18097-7-kim.phillips@amd.com
Neither IbsBrTarget nor OPDATA4 are populated in IBS Fetch mode.
Don't accumulate them into raw sample user data in that case.
Also, in Fetch mode, add saving the IBS Fetch Control Extended MSR.
Technically, there is an ABI change here with respect to the IBS raw
sample data format, but I don't see any perf driver version information
being included in perf.data file headers, but, existing users can detect
whether the size of the sample record has reduced by 8 bytes to
determine whether the IBS driver has this fix.
Fixes: 904cb3677f ("perf/x86/amd/ibs: Update IBS MSRs and feature definitions")
Reported-by: Stephane Eranian <stephane.eranian@google.com>
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200908214740.18097-6-kim.phillips@amd.com
get_ibs_op_count() adds hardware's current count (IbsOpCurCnt) bits
to its count regardless of hardware's valid status.
According to the PPR for AMD Family 17h Model 31h B0 55803 Rev 0.54,
if the counter rolls over, valid status is set, and the lower 7 bits
of IbsOpCurCnt are randomized by hardware.
Don't include those bits in the driver's event count.
Fixes: 8b1e13638d ("perf/x86-ibs: Fix usage of IBS op current count")
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537
Commit 5738891229 ("perf/x86/amd: Add support for Large Increment
per Cycle Events") mistakenly zeroes the upper 16 bits of the count
in set_period(). That's fine for counting with perf stat, but not
sampling with perf record when only Large Increment events are being
sampled. To enable sampling, we sign extend the upper 16 bits of the
merged counter pair as described in the Family 17h PPRs:
"Software wanting to preload a value to a merged counter pair writes the
high-order 16-bit value to the low-order 16 bits of the odd counter and
then writes the low-order 48-bit value to the even counter. Reading the
even counter of the merged counter pair returns the full 64-bit value."
Fixes: 5738891229 ("perf/x86/amd: Add support for Large Increment per Cycle Events")
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537
Commit 2f217d58a8 ("perf/x86/amd/uncore: Set the thread mask for
F17h L3 PMCs") inadvertently changed the uncore driver's behaviour
wrt perf tool invocations with or without a CPU list, specified with
-C / --cpu=.
Change the behaviour of the driver to assume the former all-cpu (-a)
case, which is the more commonly desired default. This fixes
'-a -A' invocations without explicit cpu lists (-C) to not count
L3 events only on behalf of the first thread of the first core
in the L3 domain.
BEFORE:
Activity performed by the first thread of the last core (CPU#43) in
CPU#40's L3 domain is not reported by CPU#40:
sudo perf stat -a -A -e l3_request_g1.caching_l3_cache_accesses taskset -c 43 perf bench mem memcpy -s 32mb -l 100 -f default
...
CPU36 21,835 l3_request_g1.caching_l3_cache_accesses
CPU40 87,066 l3_request_g1.caching_l3_cache_accesses
CPU44 17,360 l3_request_g1.caching_l3_cache_accesses
...
AFTER:
The L3 domain activity is now reported by CPU#40:
sudo perf stat -a -A -e l3_request_g1.caching_l3_cache_accesses taskset -c 43 perf bench mem memcpy -s 32mb -l 100 -f default
...
CPU36 354,891 l3_request_g1.caching_l3_cache_accesses
CPU40 1,780,870 l3_request_g1.caching_l3_cache_accesses
CPU44 315,062 l3_request_g1.caching_l3_cache_accesses
...
Fixes: 2f217d58a8 ("perf/x86/amd/uncore: Set the thread mask for F17h L3 PMCs")
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200908214740.18097-2-kim.phillips@amd.com
A warning as below may be triggered when sampling with large PEBS.
[ 410.411250] perf: interrupt took too long (72145 > 71975), lowering
kernel.perf_event_max_sample_rate to 2000
[ 410.724923] ------------[ cut here ]------------
[ 410.729822] WARNING: CPU: 0 PID: 16397 at arch/x86/events/core.c:1422
x86_pmu_stop+0x95/0xa0
[ 410.933811] x86_pmu_del+0x50/0x150
[ 410.937304] event_sched_out.isra.0+0xbc/0x210
[ 410.941751] group_sched_out.part.0+0x53/0xd0
[ 410.946111] ctx_sched_out+0x193/0x270
[ 410.949862] __perf_event_task_sched_out+0x32c/0x890
[ 410.954827] ? set_next_entity+0x98/0x2d0
[ 410.958841] __schedule+0x592/0x9c0
[ 410.962332] schedule+0x5f/0xd0
[ 410.965477] exit_to_usermode_loop+0x73/0x120
[ 410.969837] prepare_exit_to_usermode+0xcd/0xf0
[ 410.974369] ret_from_intr+0x2a/0x3a
[ 410.977946] RIP: 0033:0x40123c
[ 411.079661] ---[ end trace bc83adaea7bb664a ]---
In the non-overflow context, e.g., context switch, with large PEBS, perf
may stop an event twice. An example is below.
//max_samples_per_tick is adjusted to 2
//NMI is triggered
intel_pmu_handle_irq()
handle_pmi_common()
drain_pebs()
__intel_pmu_pebs_event()
perf_event_overflow()
__perf_event_account_interrupt()
hwc->interrupts = 1
return 0
//A context switch happens right after the NMI.
//In the same tick, the perf_throttled_seq is not changed.
perf_event_task_sched_out()
perf_pmu_sched_task()
intel_pmu_drain_pebs_buffer()
__intel_pmu_pebs_event()
perf_event_overflow()
__perf_event_account_interrupt()
++hwc->interrupts >= max_samples_per_tick
return 1
x86_pmu_stop(); # First stop
perf_event_context_sched_out()
task_ctx_sched_out()
ctx_sched_out()
event_sched_out()
x86_pmu_del()
x86_pmu_stop(); # Second stop and trigger the warning
Perf should only invoke the perf_event_overflow() in the overflow
context.
Current drain_pebs() is called from:
- handle_pmi_common() -- overflow context
- intel_pmu_pebs_sched_task() -- non-overflow context
- intel_pmu_pebs_disable() -- non-overflow context
- intel_pmu_auto_reload_read() -- possible overflow context
With PERF_SAMPLE_READ + PERF_FORMAT_GROUP, the function may be
invoked in the NMI handler. But, before calling the function, the
PEBS buffer has already been drained. The __intel_pmu_pebs_event()
will not be called in the possible overflow context.
To fix the issue, an indicator is required to distinguish between the
overflow context aka handle_pmi_common() and other cases.
The dummy regs pointer can be used as the indicator.
In the non-overflow context, perf should treat the last record the same
as other PEBS records, and doesn't invoke the generic overflow handler.
Fixes: 21509084f9 ("perf/x86/intel: Handle multiple records in the PEBS buffer")
Reported-by: Like Xu <like.xu@linux.intel.com>
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Like Xu <like.xu@linux.intel.com>
Link: https://lkml.kernel.org/r/20200902210649.2743-1-kan.liang@linux.intel.com
Latch sequence counters have unique read and write APIs, and thus
seqcount_latch_t was recently introduced at seqlock.h.
Use that new data type instead of plain seqcount_t. This adds the
necessary type-safety and ensures that only latching-safe seqcount APIs
are to be used.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
[peterz: unwreck cyc2ns_read_begin()]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200827114044.11173-7-a.darwish@linutronix.de
When running under SEV-ES, the kernel has to tell the hypervisor when to
open the NMI window again after an NMI was injected. This is done with
an NMI-complete message to the hypervisor.
Add code to the kernel's NMI handler to send this message right at the
beginning of do_nmi(). This always allows nesting NMIs.
[ bp: Mark __sev_es_nmi_complete() noinstr:
vmlinux.o: warning: objtool: exc_nmi()+0x17: call to __sev_es_nmi_complete()
leaves .noinstr.text section
While at it, use __pa_nodebug() for the same reason due to
CONFIG_DEBUG_VIRTUAL=y:
vmlinux.o: warning: objtool: __sev_es_nmi_complete()+0xd9: call to __phys_addr()
leaves .noinstr.text section ]
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-71-joro@8bytes.org
Add a play_dead handler when running under SEV-ES. This is needed
because the hypervisor can't deliver an SIPI request to restart the AP.
Instead, the kernel has to issue a VMGEXIT to halt the VCPU until the
hypervisor wakes it up again.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-70-joro@8bytes.org
The APs are not ready to handle exceptions when verify_cpu() is called
in secondary_startup_64().
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20200907131613.12703-69-joro@8bytes.org
The IDT on 64-bit contains vectors which use paranoid_entry() and/or IST
stacks. To make these vectors work, the TSS and the getcpu GDT entry need
to be set up before the IDT is loaded.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-68-joro@8bytes.org
As part of the GHCB specification, the booting of APs under SEV-ES
requires an AP jump table when transitioning from one layer of code to
another (e.g. when going from UEFI to the OS). As a result, each layer
that parks an AP must provide the physical address of an AP jump table
to the next layer via the hypervisor.
Upon booting of the kernel, read the AP jump table address from the
hypervisor. Under SEV-ES, APs are started using the INIT-SIPI-SIPI
sequence. Before issuing the first SIPI request for an AP, the start
CS and IP is programmed into the AP jump table. Upon issuing the SIPI
request, the AP will awaken and jump to that start CS:IP address.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
[ jroedel@suse.de: - Adapted to different code base
- Moved AP table setup from SIPI sending path to
real-mode setup code
- Fix sparse warnings ]
Co-developed-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-67-joro@8bytes.org
The code at the trampoline entry point is executed in real-mode. In
real-mode, #VC exceptions can't be handled so anything that might cause
such an exception must be avoided.
In the standard trampoline entry code this is the WBINVD instruction and
the call to verify_cpu(), which are both not needed anyway when running
as an SEV-ES guest.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-66-joro@8bytes.org
Implement the callbacks to copy the processor state required by KVM to
the GHCB.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
[ jroedel@suse.de: - Split out of a larger patch
- Adapt to different callback functions ]
Co-developed-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-64-joro@8bytes.org
Add two new paravirt callbacks to provide hypervisor-specific processor
state in the GHCB and to copy state from the hypervisor back to the
processor.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-63-joro@8bytes.org
Handle #VC exceptions caused by #DB exceptions in the guest. Those
must be handled outside of instrumentation_begin()/end() so that the
handler will not be raised recursively.
Handle them by calling the kernel's debug exception handler.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-62-joro@8bytes.org
Implement a handler for #VC exceptions caused by #AC exceptions. The
#AC exception is just forwarded to do_alignment_check() and not pushed
down to the hypervisor, as requested by the SEV-ES GHCB Standardization
Specification.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-61-joro@8bytes.org
Implement a handler for #VC exceptions caused by VMMCALL instructions.
This is only a starting point, VMMCALL emulation under SEV-ES needs
further hypervisor-specific changes to provide additional state.
[ bp: Drop "this patch". ]
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
[ jroedel@suse.de: Adapt to #VC handling infrastructure ]
Co-developed-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-60-joro@8bytes.org
Implement a handler for #VC exceptions caused by INVD instructions.
Since Linux should never use INVD, just mark it as unsupported.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
[ jroedel@suse.de: Adapt to #VC handling infrastructure ]
Co-developed-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-57-joro@8bytes.org
Implement a handler for #VC exceptions caused by RDTSC and RDTSCP
instructions. Also make it available in the pre-decompression stage
because the KASLR code uses RDTSC/RDTSCP to gather entropy and some
hypervisors intercept these instructions.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
[ jroedel@suse.de: - Adapt to #VC handling infrastructure
- Make it available early ]
Co-developed-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-55-joro@8bytes.org
Add code to handle #VC exceptions on DR7 register reads and writes.
This is needed early because show_regs() reads DR7 to print it out.
Under SEV-ES, there is currently no support for saving/restoring the
DRx registers but software expects to be able to write to the DR7
register. For now, cache the value written to DR7 and return it on
read attempts, but do not touch the real hardware DR7.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
[ jroedel@suse.de: - Adapt to #VC handling framework
- Support early usage ]
Co-developed-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-53-joro@8bytes.org
Add handling for emulation of the MOVS instruction on MMIO regions, as
done by the memcpy_toio() and memcpy_fromio() functions.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-51-joro@8bytes.org
Add a handler for #VC exceptions caused by MMIO intercepts. These
intercepts come along as nested page faults on pages with reserved
bits set.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
[ jroedel@suse.de: Adapt to VC handling framework ]
Co-developed-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-50-joro@8bytes.org
When a #VC exception is triggered by user-space, the instruction decoder
needs to read the instruction bytes from user addresses. Enhance
vc_decode_insn() to safely fetch kernel and user instructions.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-49-joro@8bytes.org
The #VC handler needs special entry code because:
1. It runs on an IST stack
2. It needs to be able to handle nested #VC exceptions
To make this work, the entry code is implemented to pretend it doesn't
use an IST stack. When entered from user-mode or early SYSCALL entry
path it switches to the task stack. If entered from kernel-mode it tries
to switch back to the previous stack in the IRET frame.
The stack found in the IRET frame is validated first, and if it is not
safe to use it for the #VC handler, the code will switch to a
fall-back stack (the #VC2 IST stack). From there, it can cause nested
exceptions again.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-46-joro@8bytes.org
The get_stack_info() functionality is needed in the entry code for the
#VC exception handler. Provide a version of it in the .text.noinstr
section which can be called safely from there.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-45-joro@8bytes.org
When an NMI hits in the #VC handler entry code before it has switched to
another stack, any subsequent #VC exception in the NMI code-path will
overwrite the interrupted #VC handler's stack.
Make sure this doesn't happen by explicitly adjusting the #VC IST entry
in the NMI handler for the time it can cause #VC exceptions.
[ bp: Touchups, spelling fixes. ]
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-44-joro@8bytes.org
Allocate and map an IST stack and an additional fall-back stack for
the #VC handler. The memory for the stacks is allocated only when
SEV-ES is active.
The #VC handler needs to use an IST stack because a #VC exception can be
raised from kernel space with unsafe stack, e.g. in the SYSCALL entry
path.
Since the #VC exception can be nested, the #VC handler switches back to
the interrupted stack when entered from kernel space. If switching back
is not possible, the fall-back stack is used.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-43-joro@8bytes.org
The runtime handler needs one GHCB per-CPU. Set them up and map them
unencrypted.
[ bp: Touchups and simplification. ]
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-42-joro@8bytes.org
Add the infrastructure to handle #VC exceptions when the kernel runs on
virtual addresses and has mapped a GHCB. This handler will be used until
the runtime #VC handler takes over.
Since the handler runs very early, disable instrumentation for sev-es.c.
[ bp: Make vc_ghcb_invalidate() __always_inline so that it can be
inlined in noinstr functions like __sev_es_nmi_complete(). ]
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200908123816.GB3764@8bytes.org
Setup an early handler for #VC exceptions. There is no GHCB mapped
yet, so just re-use the vc_no_ghcb_handler(). It can only handle
CPUID exit-codes, but that should be enough to get the kernel through
verify_cpu() and __startup_64() until it runs on virtual addresses.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
[ boot failure Error: kernel_ident_mapping_init() failed. ]
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lkml.kernel.org/r/20200908123517.GA3764@8bytes.org
Setup sev-es.c and include the code from the pre-decompression stage
to also build it into the image of the running kernel. Temporarily add
__maybe_unused annotations to avoid build warnings until the functions
get used.
[ bp: Use the non-tracing rd/wrmsr variants because:
vmlinux.o: warning: objtool: __sev_es_nmi_complete()+0x11f: \
call to do_trace_write_msr() leaves .noinstr.text section
as __sev_es_nmi_complete() is noinstr due to being called from the
NMI handler exc_nmi(). ]
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-39-joro@8bytes.org
A recent refresh of the defconfigs got rid of the following
(unset) config:
# CONFIG_64BIT is not set
Innocuous as it seems, when the config file is saved again the
behavior is changed so that CONFIG_64BIT=y.
Currently,
$ make i386_defconfig
$ grep CONFIG_64BIT .config
CONFIG_64BIT=y
whereas previously (and with this patch):
$ make i386_defconfig
$ grep CONFIG_64BIT .config
# CONFIG_64BIT is not set
( This was found with weird compiler errors on OpenEmbedded
builds, as the compiler was unable to cope with 64-bits data
types. )
Fixes: 1d0e12fd3a ("x86/defconfigs: Refresh defconfig files")
Reported-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Stop providing the possibility to override the address space using
set_fs() now that there is no need for that any more. To properly
handle the TASK_SIZE_MAX checking for 4 vs 5-level page tables on
x86 a new alternative is introduced, which just like the one in
entry_64.S has to use the hardcoded virtual address bits to escape
the fact that TASK_SIZE_MAX isn't actually a constant when 5-level
page tables are enabled.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
For 64-bit the only thing missing was a strategic _AC, and for 32-bit we
need to use __PAGE_OFFSET instead of PAGE_OFFSET in the TASK_SIZE
definition to escape the explicit unsigned long cast. This just works
because __PAGE_OFFSET is defined using _AC itself and thus never needs
the cast anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
At least for 64-bit this moves them closer to some of the defines
they are based on, and it prepares for using the TASK_SIZE_MAX
definition from assembly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add a CONFIG_SET_FS option that is selected by architecturess that
implement set_fs, which is all of them initially. If the option is not
set stubs for routines related to overriding the address space are
provided so that architectures can start to opt out of providing set_fs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Refactor the message printed to the kernel log which indicates whether
SEV or SME, etc is active. This will scale better in the future when
more memory encryption features might be added. Also add SEV-ES to the
list of features.
[ bp: Massage. ]
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20200907131613.12703-38-joro@8bytes.org
Add a sev_es_active() function for checking whether SEV-ES is enabled.
Also cache the value of MSR_AMD64_SEV at boot to speed up the feature
checking in the running code.
[ bp: Remove "!!" in sev_active() too. ]
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20200907131613.12703-37-joro@8bytes.org
Move the assembly coded dispatch between page-faults and all other
exceptions to C code to make it easier to maintain and extend.
Also change the return-type of early_make_pgtable() to bool and make it
static.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-36-joro@8bytes.org
Move these two functions from kernel/idt.c to include/asm/desc.h:
* init_idt_data()
* idt_init_desc()
These functions are needed to setup IDT entries very early and need to
be called from head64.c. To be usable this early, these functions need
to be compiled without instrumentation and the stack-protector feature.
These features need to be kept enabled for kernel/idt.c, so head64.c
must use its own versions.
[ bp: Take Kees' suggested patch title and add his Rev-by. ]
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20200907131613.12703-35-joro@8bytes.org
Add a separate bringup IDT for the CPU bringup code that will be used
until the kernel switches to the idt_table. There are two reasons for a
separate IDT:
1) When the idt_table is set up and the secondary CPUs are
booted, it contains entries (e.g. IST entries) which
require certain CPU state to be set up. This includes a
working TSS (for IST), MSR_GS_BASE (for stack protector) or
CR4.FSGSBASE (for paranoid_entry) path. By using a
dedicated IDT for early boot this state need not to be set
up early.
2) The idt_table is static to idt.c, so any function
using/modifying must be in idt.c too. That means that all
compiler driven instrumentation like tracing or KASAN is
also active in this code. But during early CPU bringup the
environment is not set up for this instrumentation to work
correctly.
To avoid all of these hassles and make early exception handling robust,
use a dedicated bringup IDT.
The IDT is loaded two times, first on the boot CPU while the kernel is
still running on direct mapped addresses, and again later after the
switch to kernel addresses has happened. The second IDT load happens on
the boot and secondary CPUs.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-34-joro@8bytes.org
Make sure there is a stack once the kernel runs from virtual addresses.
At this stage any secondary CPU which boots will have lost its stack
because the kernel switched to a new page-table which does not map the
real-mode stack anymore.
This is needed for handling early #VC exceptions caused by instructions
like CPUID.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20200907131613.12703-33-joro@8bytes.org
Make sure segments are properly set up before setting up an IDT and
doing anything that might cause a #VC exception. This is later needed
for early exception handling.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20200907131613.12703-32-joro@8bytes.org
Load the GDT right after switching to virtual addresses to make sure
there is a defined GDT for exception handling.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20200907131613.12703-31-joro@8bytes.org
Handling exceptions during boot requires a working GDT. The kernel GDT
can't be used on the direct mapping, so load a startup GDT and setup
segments.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-30-joro@8bytes.org
The code to setup idt_data is needed for early exception handling, but
set_intr_gate() can't be used that early because it has pv-ops in its
code path which don't work that early.
Split out the idt_data initialization part from set_intr_gate() so
that it can be used separately.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20200907131613.12703-29-joro@8bytes.org
The xgetbv() function is needed in the pre-decompression boot code,
but asm/fpu/internal.h can't be included there directly. Doing so
opens the door to include-hell due to various include-magic in
boot/compressed/misc.h.
Avoid that by moving xgetbv()/xsetbv() to a separate header file and
include it instead.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-27-joro@8bytes.org
Force a page-fault on any further accesses to the GHCB page when they
shouldn't happen anymore. This will catch any bugs where a #VC exception
is raised even though none is expected anymore.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-25-joro@8bytes.org
Install an exception handler for #VC exception that uses a GHCB. Also
add the infrastructure for handling different exit-codes by decoding
the instruction that caused the exception and error handling.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-24-joro@8bytes.org
The functions are needed to map the GHCB for SEV-ES guests. The GHCB
is used for communication with the hypervisor, so its content must not
be encrypted. After the GHCB is not needed anymore it must be mapped
encrypted again so that the running kernel image can safely re-use the
memory.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-23-joro@8bytes.org
Call set_sev_encryption_mask() while still on the stage 1 #VC-handler
because the stage 2 handler needs the kernel's own page tables to be
set up, to which calling set_sev_encryption_mask() is a prerequisite.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-21-joro@8bytes.org
Add the first handler for #VC exceptions. At stage 1 there is no GHCB
yet because the kernel might still be running on the EFI page table.
The stage 1 handler is limited to the MSR-based protocol to talk to the
hypervisor and can only support CPUID exit-codes, but that is enough to
get to stage 2.
[ bp: Zap superfluous newlines after rd/wrmsr instruction mnemonics. ]
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-20-joro@8bytes.org
Changing the function to take start and end as parameters instead of
start and size simplifies the callers which don't need to calculate the
size if they already have start and end.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20200907131613.12703-19-joro@8bytes.org
With the page-fault handler in place, he identity mapping can be built
on-demand. So remove the code which manually creates the mappings and
unexport/remove the functions used for it.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20200907131613.12703-18-joro@8bytes.org
When booted through startup_64(), the kernel keeps running on the EFI
page table until the KASLR code sets up its own page table. Without
KASLR, the pre-decompression boot code never switches off the EFI page
table. Change that by unconditionally switching to a kernel-controlled
page table after relocation.
This makes sure the kernel can make changes to the mapping when
necessary, for example map pages unencrypted in SEV and SEV-ES guests.
Also, remove the debug_putstr() calls in initialize_identity_maps()
because the function now runs before console_init() is called.
[ bp: Massage commit message. ]
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20200907131613.12703-17-joro@8bytes.org
Install a page-fault handler to add an identity mapping to addresses
not yet mapped. Also do some checking whether the error code is sane.
This makes non SEV-ES machines use the exception handling
infrastructure in the pre-decompressions boot code too, making it less
likely to break in the future.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20200907131613.12703-16-joro@8bytes.org
The file contains only code related to identity-mapped page tables.
Rename the file and compile it always in.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20200907131613.12703-15-joro@8bytes.org
Add code needed to setup an IDT in the early pre-decompression
boot-code. The IDT is loaded first in startup_64, which is after
EfiExitBootServices() has been called, and later reloaded when the
kernel image has been relocated to the end of the decompression area.
This allows to setup different IDT handlers before and after the
relocation.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-14-joro@8bytes.org
The x86-64 ABI defines a red-zone on the stack:
The 128-byte area beyond the location pointed to by %rsp is considered
to be reserved and shall not be modified by signal or interrupt
handlers. Therefore, functions may use this area for temporary data
that is not needed across function calls. In particular, leaf
functions may use this area for their entire stack frame, rather than
adjusting the stack pointer in the prologue and epilogue. This area is
known as the red zone.
This is not compatible with exception handling, because the IRET frame
written by the hardware at the stack pointer and the functions to handle
the exception will overwrite the temporary variables of the interrupted
function, causing undefined behavior. So disable red-zones for the
pre-decompression boot code.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20200907131613.12703-13-joro@8bytes.org
Add a function to check whether an instruction has a REP prefix.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lkml.kernel.org/r/20200907131613.12703-12-joro@8bytes.org
Use the shorthand to make it more readable.
No functional changes.
Signed-off-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-5-joro@8bytes.org
Add a function to the instruction decoder which returns the pt_regs
offset of the register specified in the reg field of the modrm byte.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lkml.kernel.org/r/20200907131613.12703-11-joro@8bytes.org
Building a correct GHCB for the hypervisor requires setting valid bits
in the GHCB. Simplify that process by providing accessor functions to
set values and to update the valid bitmap and to check the valid bitmap
in KVM.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-4-joro@8bytes.org
Factor out the code used to decode an instruction with the correct
address and operand sizes to a helper function.
No functional changes.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-10-joro@8bytes.org
Extend the vmcb_safe_area with SEV-ES fields and add a new
'struct ghcb' which will be used for guest-hypervisor communication.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-3-joro@8bytes.org
Factor out the code to fetch the instruction from user-space to a helper
function.
No functional changes.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-9-joro@8bytes.org
Do not allocate a vmcb_control_area and a vmcb_save_area on the stack,
as these structures will become larger with future extenstions of
SVM and thus the svm_set_nested_state() function will become a too large
stack frame.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-2-joro@8bytes.org
The inat-tables.c file has some arrays in it that contain pointers to
other arrays. These pointers need to be relocated when the kernel
image is moved to a different location.
The pre-decompression boot-code has no support for applying ELF
relocations, so initialize these arrays at runtime in the
pre-decompression code to make sure all pointers are correctly
initialized.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lkml.kernel.org/r/20200907131613.12703-8-joro@8bytes.org
Move the definition of the x86 page-fault error code bits to a new
header file asm/trap_pf.h. This makes it easier to include them into
pre-decompression boot code. No functional changes.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-7-joro@8bytes.org
Add CPU feature detection for Secure Encrypted Virtualization with
Encrypted State. This feature enhances SEV by also encrypting the
guest register state, making it in-accessible to the hypervisor.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-6-joro@8bytes.org
We got slightly different patches removing a double word
in a comment in net/ipv4/raw.c - picked the version from net.
Simple conflict in drivers/net/ethernet/ibm/ibmvnic.c. Use cached
values instead of VNIC login response buffer (following what
commit 507ebe6444 ("ibmvnic: Fix use-after-free of VNIC login
response buffer") did).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
...because future AMD systems will support up to 64 MCA banks per CPU.
MAX_NR_BANKS is used to allocate a number of data structures, and it is
used as a ceiling for values read from MCG_CAP[Count]. Therefore, this
change will have no functional effect on existing systems with 32 or
fewer MCA banks per CPU.
However, this will increase the size of the following structures:
Global bitmaps:
- core.c / mce_banks_ce_disabled
- core.c / all_banks
- core.c / valid_banks
- core.c / toclear
- Total: 32 new bits * 4 bitmaps = 16 new bytes
Per-CPU bitmaps:
- core.c / mce_poll_banks
- intel.c / mce_banks_owned
- Total: 32 new bits * 2 bitmaps = 8 new bytes
The bitmaps are arrays of longs. So this change will only affect 32-bit
execution, since there will be one additional long used. There will be
no additional memory use on 64-bit execution, because the size of long
is 64 bits.
Global structs:
- amd.c / struct smca_bank smca_banks[]: 16 bytes per bank
- core.c / struct mce_bank_dev mce_bank_devs[]: 56 bytes per bank
- Total: 32 new banks * (16 + 56) bytes = 2304 new bytes
Per-CPU structs:
- core.c / struct mce_bank mce_banks_array[]: 16 bytes per bank
- Total: 32 new banks * 16 bytes = 512 new bytes
32-bit
Total global size increase: 2320 bytes
Total per-CPU size increase: 520 bytes
64-bit
Total global size increase: 2304 bytes
Total per-CPU size increase: 512 bytes
This additional memory should still fit within the existing .data
section of the kernel binary. However, in the case where it doesn't
fit, an additional page (4kB) of memory will be added to the binary to
accommodate the extra data which will be the maximum size increase of
vmlinux.
Signed-off-by: Akshay Gupta <Akshay.Gupta@amd.com>
[ Adjust commit message and code comment. ]
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200828192412.320052-1-Yazen.Ghannam@amd.com
Andy reported that the syscall treacing for 32bit fast syscall fails:
# ./tools/testing/selftests/x86/ptrace_syscall_32
...
[RUN] SYSEMU
[FAIL] Initial args are wrong (nr=224, args=10 11 12 13 14 4289172732)
...
[RUN] SYSCALL
[FAIL] Initial args are wrong (nr=29, args=0 0 0 0 0 4289172732)
The eason is that the conversion to generic entry code moved the retrieval
of the sixth argument (EBP) after the point where the syscall entry work
runs, i.e. ptrace, seccomp, audit...
Unbreak it by providing a split up version of syscall_enter_from_user_mode().
- syscall_enter_from_user_mode_prepare() establishes state and enables
interrupts
- syscall_enter_from_user_mode_work() runs the entry work
Replace the call to syscall_enter_from_user_mode() in the 32bit fast
syscall C-entry with the split functions and stick the EBP retrieval
between them.
Fixes: 27d6b4d14f ("x86/entry: Use generic syscall entry function")
Reported-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/87k0xdjbtt.fsf@nanos.tec.linutronix.de
Current usage of thread.debugreg6 is convoluted at best. It starts life as
a copy of the hardware DR6 value, but then various bits are cleared and
set.
Replace this with a new variable thread.virtual_dr6 that is initialized to
0 when DR6 is read and only gains bits, at the same time the actual (on
stack) dr6 value which is read from the hardware only gets bits cleared.
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20200902133201.415372940@infradead.org
DR6 has a whole bunch of bits that have negative polarity; they were
architecturally reserved and defined to be 1 and are now getting used.
Since they're 1 by default, 0 becomes the signal value.
Handle this by xor'ing the read DR6 value by the reserved mask, this
will flip them around such that 1 is the signal value (positive
polarity).
Current Linux doesn't yet support any of these bits, but there's two
defined:
- DR6[11] Bus Lock Debug Exception (ISEr39)
- DR6[16] Restricted Transactional Memory (SDM)
Update ptrace_{set,get}_debugreg() to provide/consume the value in
architectural polarity. Although afaict ptrace_set_debugreg(6) is
pointless, the value is not consumed anywhere.
Change hw_breakpoint_restore() to alway write the DR6_RESERVED value
to DR6, again, no consumer for that write.
Suggested-by: Andrew Cooper <Andrew.Cooper3@citrix.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20200902133201.354220797@infradead.org
This is called with interrupts disabled, there's no point in using
get_cpu() and per_cpu().
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20200902133201.292906672@infradead.org
Unused remnants for the bit-bucket.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20200902133201.233022474@infradead.org
Remove the historical junk and replace it with a WARN and a comment.
The problem is that even though the kernel only uses TF single-step in
kprobes and KGDB, both of which consume the event before this, QEMU/KVM has
bugs in this area that can trigger this state so it has to be dealt with.
Suggested-by: Brian Gerst <brgerst@gmail.com>
Suggested-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20200902133201.170216274@infradead.org
The cond_local_irq_enable() block, dealing with vm86 and sending
signals is only relevant for #DB-from-user, move it there.
This then reduces handle_debug() to only the notifier call, so rename
it to notify_debug().
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20200902133201.094265982@infradead.org
The historical SYSENTER junk is explicitly for from-kernel, so move it
to the #DB-from-kernel handler.
It is ordered after the notifier, which is important for KGDB which uses TF
single-step and needs to consume the event before that point.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20200902133201.031099736@infradead.org
There's no point in calculating si_code if it's not going to be used.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20200902133200.967434217@infradead.org
The handle_debug(.user) argument is used to terminate the #DB handler early
for the INT1-from-kernel case, since the kernel doesn't use INT1.
Remove the argument and handle this explicitly in #DB-from-kernel.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200902133200.907020598@infradead.org
Kprobes are on kernel text, and thus only matter for #DB-from-kernel.
Kprobes are ordered before the generic notifier, preserve that order.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200902133200.847465360@infradead.org
Move the BTF sync near the DR6 load, as this will be the only common
code guaranteed to run on every #DB.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200902133200.786888252@infradead.org
Trying to clear DR7 around a #DB from usermode malfunctions if the tasks
schedules when delivering SIGTRAP.
Rather than trying to define a special no-recursion region, just allow a
single level of recursion. The same mechanism is used for NMI, and it
hasn't caused any problems yet.
Fixes: 9f58fdde95 ("x86/db: Split out dr6/7 handling")
Reported-by: Kyle Huey <me@kylehuey.com>
Debugged-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/8b9bd05f187231df008d48cf818a6a311cbd5c98.1597882384.git.luto@kernel.org
Link: https://lore.kernel.org/r/20200902133200.726584153@infradead.org
The WARN added in commit 3c73b81a91 ("x86/entry, selftests: Further
improve user entry sanity checks") unconditionally triggers on a IVB
machine because it does not support SMAP.
For !SMAP hardware the CLAC/STAC instructions are patched out and thus if
userspace sets AC, it is still have set after entry.
Fixes: 3c73b81a91 ("x86/entry, selftests: Further improve user entry sanity checks")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200902133200.666781610@infradead.org
On i386, the order of parameters passed on regs is eax,edx,and ecx
(as per regparm(3) calling conventions).
Change the mapping in regs_get_kernel_argument(), so that arg1=ax
arg2=dx, and arg3=cx.
Running the selftests testcase kprobes_args_use.tc shows the result
as passed.
Fixes: 3c88ee194c ("x86: ptrace: Add function argument access API")
Signed-off-by: Vamshi K Sthambamkadi <vamshi.k.sthambamkadi@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200828113242.GA1424@cosmos
inst.h was included in calling.h solely to instantiate the RDPID macro.
The usage of RDPID was removed in
6a3ea3e68b ("x86/entry/64: Do not use RDPID in paranoid entry to accomodate KVM")
so remove the include.
Fixes: 6a3ea3e68b ("x86/entry/64: Do not use RDPID in paranoid entry to accomodate KVM")
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200827171735.93825-1-ubizjak@gmail.com
XORL %0,%0 is equivalent to XORQ %0,%0 as both will zero the entire
register. Use XORL %0,%0 for all operand sizes to avoid REX prefix byte
when legacy registers are used and to avoid size prefix byte when 16bit
registers are used.
Zeroing the full register is OK in this use case.
As a result, the size of the .fixup section decreases by 20 bytes.
[ bp: Massage commit message. ]
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Link: https://lkml.kernel.org/r/20200827180904.96399-1-ubizjak@gmail.com
We found that callers of dma_get_seg_boundary mostly do an ALIGN
with page mask and then do a page shift to get number of pages:
ALIGN(boundary + 1, 1 << shift) >> shift
However, the boundary might be as large as ULONG_MAX, which means
that a device has no specific boundary limit. So either "+ 1" or
passing it to ALIGN() would potentially overflow.
According to kernel defines:
#define ALIGN_MASK(x, mask) (((x) + (mask)) & ~(mask))
#define ALIGN(x, a) ALIGN_MASK(x, (typeof(x))(a) - 1)
We can simplify the logic here into a helper function doing:
ALIGN(boundary + 1, 1 << shift) >> shift
= ALIGN_MASK(b + 1, (1 << s) - 1) >> s
= {[b + 1 + (1 << s) - 1] & ~[(1 << s) - 1]} >> s
= [b + 1 + (1 << s) - 1] >> s
= [b + (1 << s)] >> s
= (b >> s) + 1
This patch introduces and applies dma_get_seg_boundary_nr_pages()
as an overflow-free helper for the dma_get_seg_boundary() callers
to get numbers of pages. It also takes care of the NULL dev case
for non-DMA API callers.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Acked-by: Niklas Schnelle <schnelle@linux.ibm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Christoph Hellwig <hch@lst.de>
One can not simply remove vmalloc faulting on x86-32. Upstream
commit: 7f0a002b5a ("x86/mm: remove vmalloc faulting")
removed it on x86 alltogether because previously the
arch_sync_kernel_mappings() interface was introduced. This interface
added synchronization of vmalloc/ioremap page-table updates to all
page-tables in the system at creation time and was thought to make
vmalloc faulting obsolete.
But that assumption was incredibly naive.
It turned out that there is a race window between the time the vmalloc
or ioremap code establishes a mapping and the time it synchronizes
this change to other page-tables in the system.
During this race window another CPU or thread can establish a vmalloc
mapping which uses the same intermediate page-table entries (e.g. PMD
or PUD) and does no synchronization in the end, because it found all
necessary mappings already present in the kernel reference page-table.
But when these intermediate page-table entries are not yet
synchronized, the other CPU or thread will continue with a vmalloc
address that is not yet mapped in the page-table it currently uses,
causing an unhandled page fault and oops like below:
BUG: unable to handle page fault for address: fe80c000
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
*pde = 33183067 *pte = a8648163
Oops: 0002 [#1] SMP
CPU: 1 PID: 13514 Comm: cve-2017-17053 Tainted: G
...
Call Trace:
ldt_dup_context+0x66/0x80
dup_mm+0x2b3/0x480
copy_process+0x133b/0x15c0
_do_fork+0x94/0x3e0
__ia32_sys_clone+0x67/0x80
__do_fast_syscall_32+0x3f/0x70
do_fast_syscall_32+0x29/0x60
do_SYSENTER_32+0x15/0x20
entry_SYSENTER_32+0x9f/0xf2
EIP: 0xb7eef549
So the arch_sync_kernel_mappings() interface is racy, but removing it
would mean to re-introduce the vmalloc_sync_all() interface, which is
even more awful. Keep arch_sync_kernel_mappings() in place and catch
the race condition in the page-fault handler instead.
Do a partial revert of above commit to get vmalloc faulting on x86-32
back in place.
Fixes: 7f0a002b5a ("x86/mm: remove vmalloc faulting")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200902155904.17544-1-joro@8bytes.org
When CONFIG_RETPOLINE is disabled, Clang uses a jump table for the
switch statement in cmdline_find_option (jump tables are disabled when
CONFIG_RETPOLINE is enabled). This function is called very early in boot
from sme_enable() if CONFIG_AMD_MEM_ENCRYPT is enabled. At this time,
the kernel is still executing out of the identity mapping, but the jump
table will contain virtual addresses.
Fix this by disabling jump tables for cmdline.c when AMD_MEM_ENCRYPT is
enabled.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200903023056.3914690-1-nivedita@alum.mit.edu
We don't want to depend on the linker's orphan section placement
heuristics as these can vary between linkers, and may change between
versions. All sections need to be explicitly handled in the linker
script.
Now that all sections are explicitly handled, enable orphan section
warnings.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20200902025347.2504702-6-keescook@chromium.org
We don't want to depend on the linker's orphan section placement
heuristics as these can vary between linkers, and may change between
versions. All sections need to be explicitly handled in the linker script.
Now that all sections are explicitly handled, enable orphan section
warnings.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20200902025347.2504702-5-keescook@chromium.org
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-09-01
The following pull-request contains BPF updates for your *net-next* tree.
There are two small conflicts when pulling, resolve as follows:
1) Merge conflict in tools/lib/bpf/libbpf.c between 88a8212028 ("libbpf: Factor
out common ELF operations and improve logging") in bpf-next and 1e891e513e
("libbpf: Fix map index used in error message") in net-next. Resolve by taking
the hunk in bpf-next:
[...]
scn = elf_sec_by_idx(obj, obj->efile.btf_maps_shndx);
data = elf_sec_data(obj, scn);
if (!scn || !data) {
pr_warn("elf: failed to get %s map definitions for %s\n",
MAPS_ELF_SEC, obj->path);
return -EINVAL;
}
[...]
2) Merge conflict in drivers/net/ethernet/mellanox/mlx5/core/en/xsk/rx.c between
9647c57b11 ("xsk: i40e: ice: ixgbe: mlx5: Test for dma_need_sync earlier for
better performance") in bpf-next and e20f0dbf20 ("net/mlx5e: RX, Add a prefetch
command for small L1_CACHE_BYTES") in net-next. Resolve the two locations by retaining
net_prefetch() and taking xsk_buff_dma_sync_for_cpu() from bpf-next. Should look like:
[...]
xdp_set_data_meta_invalid(xdp);
xsk_buff_dma_sync_for_cpu(xdp, rq->xsk_pool);
net_prefetch(xdp->data);
[...]
We've added 133 non-merge commits during the last 14 day(s) which contain
a total of 246 files changed, 13832 insertions(+), 3105 deletions(-).
The main changes are:
1) Initial support for sleepable BPF programs along with bpf_copy_from_user() helper
for tracing to reliably access user memory, from Alexei Starovoitov.
2) Add BPF infra for writing and parsing TCP header options, from Martin KaFai Lau.
3) bpf_d_path() helper for returning full path for given 'struct path', from Jiri Olsa.
4) AF_XDP support for shared umems between devices and queues, from Magnus Karlsson.
5) Initial prep work for full BPF-to-BPF call support in libbpf, from Andrii Nakryiko.
6) Generalize bpf_sk_storage map & add local storage for inodes, from KP Singh.
7) Implement sockmap/hash updates from BPF context, from Lorenz Bauer.
8) BPF xor verification for scalar types & add BPF link iterator, from Yonghong Song.
9) Use target's prog type for BPF_PROG_TYPE_EXT prog verification, from Udip Pant.
10) Rework BPF tracing samples to use libbpf loader, from Daniel T. Lee.
11) Fix xdpsock sample to really cycle through all buffers, from Weqaar Janjua.
12) Improve type safety for tun/veth XDP frame handling, from Maciej Żenczykowski.
13) Various smaller cleanups and improvements all over the place.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix build error when CONFIG_ACPI is not set/enabled by adding the header
file <asm/acpi.h> which contains a stub for the function in the build
error.
../arch/x86/pci/intel_mid_pci.c: In function ‘intel_mid_pci_init’:
../arch/x86/pci/intel_mid_pci.c:303:2: error: implicit declaration of function ‘acpi_noirq_set’; did you mean ‘acpi_irq_get’? [-Werror=implicit-function-declaration]
acpi_noirq_set();
Fixes: a912a7584e ("x86/platform/intel-mid: Move PCI initialization to arch_init()")
Link: https://lore.kernel.org/r/ea903917-e51b-4cc9-2680-bc1e36efa026@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jesse Barnes <jsbarnes@google.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org # v4.16+
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Jesse Barnes <jsbarnes@google.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
In preparation for warning on orphan sections, stop the linker from
generating the .eh_frame* sections, discard unwanted non-zero-sized
generated sections, and enforce other expected-to-be-zero-sized sections
(since discarding them might hide problems with them suddenly gaining
unexpected entries).
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200821194310.3089815-28-keescook@chromium.org
In preparation for warning on orphan sections, enforce other
expected-to-be-zero-sized sections (since discarding them might hide
problems with them suddenly gaining unexpected entries).
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200821194310.3089815-25-keescook@chromium.org
The .got.plt section should always be zero (or filled only with the
linker-generated lazy dispatch entry). Enforce this with an assert and
mark the section as INFO. This is more sensitive than just blindly
discarding the section.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200821194310.3089815-24-keescook@chromium.org
When !CONFIG_KPROBES, do not generate kprobe sections. This makes
sure there are no unexpected sections encountered by the linker scripts.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200821194310.3089815-23-keescook@chromium.org
Replace many of the indirect calls with static_call().
The average PMI time, as measured by perf_sample_event_took()*:
PRE: 3283.03 [ns]
POST: 3145.12 [ns]
Which is a ~138 [ns] win per PMI, or a ~4.2% decrease.
[*] on an IVB-EP, using: 'perf record -a -e cycles -- make O=defconfig-build/ -j80'
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20200818135805.338001015@infradead.org
In order to use static_call() to wire up x86_pmu, we need to
initialize earlier, specifically before memory allocation works; copy
some of the tricks from jump_label to enable this.
Primarily we overload key->next to store a sites pointer when there
are no modules, this avoids having to use kmalloc() to initialize the
sites and allows us to run much earlier.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20200818135805.220737930@infradead.org
Verify the text we're about to change is as we expect it to be.
Requested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200818135805.161974981@infradead.org
GCC can turn our static_call(name)(args...) into a tail call, in which
case we get a JMP.d32 into the trampoline (which then does a further
tail-call).
Teach objtool to recognise and mark these in .static_call_sites and
adjust the code patching to deal with this.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20200818135805.101186767@infradead.org
Extend the static_call infrastructure to optimize the following common
pattern:
if (func_ptr)
func_ptr(args...)
For the trampoline (which is in effect a tail-call), we patch the
JMP.d32 into a RET, which then directly consumes the trampoline call.
For the in-line sites we replace the CALL with a NOP5.
NOTE: this is 'obviously' limited to functions with a 'void' return type.
NOTE: DEFINE_STATIC_COND_CALL() only requires a typename, as opposed
to a full function.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20200818135805.042977182@infradead.org
Future patches will need to poke a RET instruction, provide the
infrastructure required for this.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20200818135804.982214828@infradead.org
Add the inline static call implementation for x86-64. The generated code
is identical to the out-of-line case, except we move the trampoline into
it's own section.
Objtool uses the trampoline naming convention to detect all the call
sites. It then annotates those call sites in the .static_call_sites
section.
During boot (and module init), the call sites are patched to call
directly into the destination function. The temporary trampoline is
then no longer used.
[peterz: merged trampolines, put trampoline in section]
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20200818135804.864271425@infradead.org
Add the x86 out-of-line static call implementation. For each key, a
permanent trampoline is created which is the destination for all static
calls for the given key. The trampoline has a direct jump which gets
patched by static_call_update() when the destination function changes.
[peterz: fixed trampoline, rewrote patching code]
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20200818135804.804315175@infradead.org
Similar to how we disallow kprobes on any other dynamic text
(ftrace/jump_label) also disallow kprobes on inline static_call()s.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200818135804.744920586@infradead.org
The .comment section doesn't belong in STABS_DEBUG. Split it out into a
new macro named ELF_DETAILS. This will gain other non-debug sections
that need to be accounted for when linking with --orphan-handling=warn.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: linux-arch@vger.kernel.org
Link: https://lore.kernel.org/r/20200821194310.3089815-5-keescook@chromium.org
TSX suspend load tracking instruction is supported by the Intel uarch
Sapphire Rapids. It aims to give a way to choose which memory accesses
do not need to be tracked in the TSX read set. It's availability is
indicated as CPUID.(EAX=7,ECX=0):EDX[bit 16].
Expose TSX Suspend Load Address Tracking feature in KVM CPUID, so KVM
could pass this information to guests and they can make use of this
feature accordingly.
Signed-off-by: Cathy Zhang <cathy.zhang@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/1598316478-23337-3-git-send-email-cathy.zhang@intel.com
- Move disabling of the local APIC after invoking fixup_irqs() to ensure
that interrupts which are incoming are noted in the IRR and not ignored.
- Unbreak affinity setting. The rework of the entry code reused the
regular exception entry code for device interrupts. The vector number is
pushed into the errorcode slot on the stack which is then lifted into an
argument and set to -1 because that's regs->orig_ax which is used in
quite some places to check whether the entry came from a syscall. But it
was overlooked that orig_ax is used in the affinity cleanup code to
validate whether the interrupt has arrived on the new target. It turned
out that this vector check is pointless because interrupts are never
moved from one vector to another on the same CPU. That check is a
historical leftover from the time where x86 supported multi-CPU
affinities, but not longer needed with the now strict single CPU
affinity. Famous last words ...
- Add a missing check for an empty cpumask into the matrix allocator. The
affinity change added a warning to catch the case where an interrupt is
moved on the same CPU to a different vector. This triggers because a
condition with an empty cpumask returns an assignment from the allocator
as the allocator uses for_each_cpu() without checking the cpumask for
being empty. The historical inconsistent for_each_cpu() behaviour of
ignoring the cpumask and unconditionally claiming that CPU0 is in the
mask striked again. Sigh.
-----BEGIN PGP SIGNATURE-----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=zIi4
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"Three interrupt related fixes for X86:
- Move disabling of the local APIC after invoking fixup_irqs() to
ensure that interrupts which are incoming are noted in the IRR and
not ignored.
- Unbreak affinity setting.
The rework of the entry code reused the regular exception entry
code for device interrupts. The vector number is pushed into the
errorcode slot on the stack which is then lifted into an argument
and set to -1 because that's regs->orig_ax which is used in quite
some places to check whether the entry came from a syscall.
But it was overlooked that orig_ax is used in the affinity cleanup
code to validate whether the interrupt has arrived on the new
target. It turned out that this vector check is pointless because
interrupts are never moved from one vector to another on the same
CPU. That check is a historical leftover from the time where x86
supported multi-CPU affinities, but not longer needed with the now
strict single CPU affinity. Famous last words ...
- Add a missing check for an empty cpumask into the matrix allocator.
The affinity change added a warning to catch the case where an
interrupt is moved on the same CPU to a different vector. This
triggers because a condition with an empty cpumask returns an
assignment from the allocator as the allocator uses for_each_cpu()
without checking the cpumask for being empty. The historical
inconsistent for_each_cpu() behaviour of ignoring the cpumask and
unconditionally claiming that CPU0 is in the mask struck again.
Sigh.
plus a new entry into the MAINTAINER file for the HPE/UV platform"
* tag 'x86-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/matrix: Deal with the sillyness of for_each_cpu() on UP
x86/irq: Unbreak interrupt affinity setting
x86/hotplug: Silence APIC only after all interrupts are migrated
MAINTAINERS: Add entry for HPE Superdome Flex (UV) maintainers
- Prevent recursion by using raw_cpu_* operations
- Fixup the interrupt state in the cpu idle code to be consistent
- Push rcu_idle_enter/exit() invocations deeper into the idle path so
that the lock operations are inside the RCU watching sections
- Move trace_cpu_idle() into generic code so it's called before RCU goes
idle.
- Handle raw_local_irq* vs. local_irq* operations correctly
- Move the tracepoints out from under the lockdep recursion handling
which turned out to be fragile and inconsistent.
-----BEGIN PGP SIGNATURE-----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=Hgt6
-----END PGP SIGNATURE-----
Merge tag 'locking-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"A set of fixes for lockdep, tracing and RCU:
- Prevent recursion by using raw_cpu_* operations
- Fixup the interrupt state in the cpu idle code to be consistent
- Push rcu_idle_enter/exit() invocations deeper into the idle path so
that the lock operations are inside the RCU watching sections
- Move trace_cpu_idle() into generic code so it's called before RCU
goes idle.
- Handle raw_local_irq* vs. local_irq* operations correctly
- Move the tracepoints out from under the lockdep recursion handling
which turned out to be fragile and inconsistent"
* tag 'locking-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
lockdep,trace: Expose tracepoints
lockdep: Only trace IRQ edges
mips: Implement arch_irqs_disabled()
arm64: Implement arch_irqs_disabled()
nds32: Implement arch_irqs_disabled()
locking/lockdep: Cleanup
x86/entry: Remove unused THUNKs
cpuidle: Move trace_cpu_idle() into generic code
cpuidle: Make CPUIDLE_FLAG_TLB_FLUSHED generic
sched,idle,rcu: Push rcu_idle deeper into the idle path
cpuidle: Fixup IRQ state
lockdep: Use raw_cpu_*() for per-cpu variables
Intel TSX suspend load tracking instructions aim to give a way to choose
which memory accesses do not need to be tracked in the TSX read set. Add
TSX suspend load tracking CPUID feature flag TSXLDTRK for enumeration.
A processor supports Intel TSX suspend load address tracking if
CPUID.0x07.0x0:EDX[16] is present. Two instructions XSUSLDTRK, XRESLDTRK
are available when this feature is present.
The CPU feature flag is shown as "tsxldtrk" in /proc/cpuinfo.
Signed-off-by: Kyung Min Park <kyung.min.park@intel.com>
Signed-off-by: Cathy Zhang <cathy.zhang@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/1598316478-23337-2-git-send-email-cathy.zhang@intel.com
Introduce sleepable BPF programs that can request such property for themselves
via BPF_F_SLEEPABLE flag at program load time. In such case they will be able
to use helpers like bpf_copy_from_user() that might sleep. At present only
fentry/fexit/fmod_ret and lsm programs can request to be sleepable and only
when they are attached to kernel functions that are known to allow sleeping.
The non-sleepable programs are relying on implicit rcu_read_lock() and
migrate_disable() to protect life time of programs, maps that they use and
per-cpu kernel structures used to pass info between bpf programs and the
kernel. The sleepable programs cannot be enclosed into rcu_read_lock().
migrate_disable() maps to preempt_disable() in non-RT kernels, so the progs
should not be enclosed in migrate_disable() as well. Therefore
rcu_read_lock_trace is used to protect the life time of sleepable progs.
There are many networking and tracing program types. In many cases the
'struct bpf_prog *' pointer itself is rcu protected within some other kernel
data structure and the kernel code is using rcu_dereference() to load that
program pointer and call BPF_PROG_RUN() on it. All these cases are not touched.
Instead sleepable bpf programs are allowed with bpf trampoline only. The
program pointers are hard-coded into generated assembly of bpf trampoline and
synchronize_rcu_tasks_trace() is used to protect the life time of the program.
The same trampoline can hold both sleepable and non-sleepable progs.
When rcu_read_lock_trace is held it means that some sleepable bpf program is
running from bpf trampoline. Those programs can use bpf arrays and preallocated
hash/lru maps. These map types are waiting on programs to complete via
synchronize_rcu_tasks_trace();
Updates to trampoline now has to do synchronize_rcu_tasks_trace() and
synchronize_rcu_tasks() to wait for sleepable progs to finish and for
trampoline assembly to finish.
This is the first step of introducing sleepable progs. Eventually dynamically
allocated hash maps can be allowed and networking program types can become
sleepable too.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: KP Singh <kpsingh@google.com>
Link: https://lore.kernel.org/bpf/20200827220114.69225-3-alexei.starovoitov@gmail.com
Remove asm/io_apic.h which is included more than once.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Link: https://lkml.kernel.org/r/20200819112910.7629-1-wanghai38@huawei.com
Several people reported that 5.8 broke the interrupt affinity setting
mechanism.
The consolidation of the entry code reused the regular exception entry code
for device interrupts and changed the way how the vector number is conveyed
from ptregs->orig_ax to a function argument.
The low level entry uses the hardware error code slot to push the vector
number onto the stack which is retrieved from there into a function
argument and the slot on stack is set to -1.
The reason for setting it to -1 is that the error code slot is at the
position where pt_regs::orig_ax is. A positive value in pt_regs::orig_ax
indicates that the entry came via a syscall. If it's not set to a negative
value then a signal delivery on return to userspace would try to restart a
syscall. But there are other places which rely on pt_regs::orig_ax being a
valid indicator for syscall entry.
But setting pt_regs::orig_ax to -1 has a nasty side effect vs. the
interrupt affinity setting mechanism, which was overlooked when this change
was made.
Moving interrupts on x86 happens in several steps. A new vector on a
different CPU is allocated and the relevant interrupt source is
reprogrammed to that. But that's racy and there might be an interrupt
already in flight to the old vector. So the old vector is preserved until
the first interrupt arrives on the new vector and the new target CPU. Once
that happens the old vector is cleaned up, but this cleanup still depends
on the vector number being stored in pt_regs::orig_ax, which is now -1.
That -1 makes the check for cleanup: pt_regs::orig_ax == new_vector
always false. As a consequence the interrupt is moved once, but then it
cannot be moved anymore because the cleanup of the old vector never
happens.
There would be several ways to convey the vector information to that place
in the guts of the interrupt handling, but on deeper inspection it turned
out that this check is pointless and a leftover from the old affinity model
of X86 which supported multi-CPU affinities. Under this model it was
possible that an interrupt had an old and a new vector on the same CPU, so
the vector match was required.
Under the new model the effective affinity of an interrupt is always a
single CPU from the requested affinity mask. If the affinity mask changes
then either the interrupt stays on the CPU and on the same vector when that
CPU is still in the new affinity mask or it is moved to a different CPU, but
it is never moved to a different vector on the same CPU.
Ergo the cleanup check for the matching vector number is not required and
can be removed which makes the dependency on pt_regs:orig_ax go away.
The remaining check for new_cpu == smp_processsor_id() is completely
sufficient. If it matches then the interrupt was successfully migrated and
the cleanup can proceed.
For paranoia sake add a warning into the vector assignment code to
validate that the assumption of never moving to a different vector on
the same CPU holds.
Fixes: 633260fa14 ("x86/irq: Convey vector as argument and not in ptregs")
Reported-by: Alex bykov <alex.bykov@scylladb.com>
Reported-by: Avi Kivity <avi@scylladb.com>
Reported-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Alexander Graf <graf@amazon.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87wo1ltaxz.fsf@nanos.tec.linutronix.de
There is a race when taking a CPU offline. Current code looks like this:
native_cpu_disable()
{
...
apic_soft_disable();
/*
* Any existing set bits for pending interrupt to
* this CPU are preserved and will be sent via IPI
* to another CPU by fixup_irqs().
*/
cpu_disable_common();
{
....
/*
* Race window happens here. Once local APIC has been
* disabled any new interrupts from the device to
* the old CPU are lost
*/
fixup_irqs(); // Too late to capture anything in IRR.
...
}
}
The fix is to disable the APIC *after* cpu_disable_common().
Testing was done with a USB NIC that provided a source of frequent
interrupts. A script migrated interrupts to a specific CPU and
then took that CPU offline.
Fixes: 60dcaad573 ("x86/hotplug: Silence APIC and NMI when CPU is dead")
Reported-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Tested-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/lkml/875zdarr4h.fsf@nanos.tec.linutronix.de/
Link: https://lore.kernel.org/r/1598501530-45821-1-git-send-email-ashok.raj@intel.com
A long time ago, Linux cleared IA32_MCG_STATUS at the very end of machine
check processing.
Then, some fancy recovery and IST manipulation was added in:
d4812e169d ("x86, mce: Get rid of TIF_MCE_NOTIFY and associated mce tricks")
and clearing IA32_MCG_STATUS was pulled earlier in the function.
Next change moved the actual recovery out of do_machine_check() and
just used task_work_add() to schedule it later (before returning to the
user):
5567d11c21 ("x86/mce: Send #MC singal from task work")
Most recently the fancy IST footwork was removed as no longer needed:
b052df3da8 ("x86/entry: Get rid of ist_begin/end_non_atomic()")
At this point there is no reason remaining to clear IA32_MCG_STATUS early.
It can move back to the very end of the function.
Also move sync_core(). The comments for this function say that it should
only be called when instructions have been changed/re-mapped. Recovery
for an instruction fetch may change the physical address. But that
doesn't happen until the scheduled work runs (which could be on another
CPU).
[ bp: Massage commit message. ]
Reported-by: Gabriele Paoloni <gabriele.paoloni@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200824221237.5397-1-tony.luck@intel.com
Early Intel hardware implementations of Memory Bandwidth Allocation (MBA)
could only control bandwidth at the processor core level. This meant that
when two processes with different bandwidth allocations ran simultaneously
on the same core the hardware had to resolve this difference. It did so by
applying the higher throttling value (lower bandwidth) to both processes.
Newer implementations can apply different throttling values to each
thread on a core.
Introduce a new resctrl file, "thread_throttle_mode", on Intel systems
that shows to the user how throttling values are allocated, per-core or
per-thread.
On systems that support per-core throttling, the file will display "max".
On newer systems that support per-thread throttling, the file will display
"per-thread".
AMD confirmed in [1] that AMD bandwidth allocation is already at thread
level but that the AMD implementation does not use a memory delay
throttle mode. So to avoid confusion the thread throttling mode would be
UNDEFINED on AMD systems and the "thread_throttle_mode" file will not be
visible.
Originally-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lkml.kernel.org/r/1598296281-127595-3-git-send-email-fenghua.yu@intel.com
Link: [1] https://lore.kernel.org/lkml/18d277fd-6523-319c-d560-66b63ff606b8@amd.com
Some systems support per-thread Memory Bandwidth Allocation (MBA) which
applies a throttling delay value to each hardware thread instead of to
a core. Per-thread MBA is enumerated by CPUID.
No feature flag is shown in /proc/cpuinfo. User applications need to
check a resctrl throttling mode info file to know if the feature is
supported.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lkml.kernel.org/r/1598296281-127595-2-git-send-email-fenghua.yu@intel.com
Unused remnants
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Marco Elver <elver@google.com>
Link: https://lkml.kernel.org/r/20200821085348.487040689@infradead.org
Remove trace_cpu_idle() from the arch_cpu_idle() implementations and
put it in the generic code, right before disabling RCU. Gets rid of
more trace_*_rcuidle() users.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Marco Elver <elver@google.com>
Link: https://lkml.kernel.org/r/20200821085348.428433395@infradead.org
This allows moving the leave_mm() call into generic code before
rcu_idle_enter(). Gets rid of more trace_*_rcuidle() users.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Marco Elver <elver@google.com>
Link: https://lkml.kernel.org/r/20200821085348.369441600@infradead.org
Use hlist_for_each_entry_srcu() instead of hlist_for_each_entry_rcu()
as it also checkes if the right lock is held.
Using hlist_for_each_entry_rcu() with a condition argument will not
report the cases where a SRCU protected list is traversed using
rcu_read_lock(). Hence, use hlist_for_each_entry_srcu().
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: <kvm@vger.kernel.org>
ptrace and prctl() are not really fast paths to warrant the use of
static_cpu_has() and cause alternatives patching for no good reason.
Replace with boot_cpu_has() which is simple and fast enough.
No functional changes.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200818103715.32736-1-bp@alien8.de
path and unconditionally uses LSL to retrieve the CPU number. RDPID depends
on MSR_TSX_AUX. KVM has an optmization to avoid expensive MRS read/writes
on VMENTER/EXIT. It caches the MSR values and restores them either when
leaving the run loop, on preemption or when going out to user
space. MSR_TSX_AUX is part of that lazy MSR set, so after writing the guest
value and before the lazy restore any exception using the paranoid entry
will read the guest value and use it as CPU number to retrieve the GSBASE
value for the current CPU when FSGSBASE is enabled. As RDPID is only used
in that particular entry path, there is no reason to burden VMENTER/EXIT
with two extra MSR writes. Remove the RDPID optimization, which is not even
backed by numbers from the paranoid entry path instead.
-----BEGIN PGP SIGNATURE-----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=AEel
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Thomas Gleixner:
"A single fix for x86 which removes the RDPID usage from the paranoid
entry path and unconditionally uses LSL to retrieve the CPU number.
RDPID depends on MSR_TSX_AUX. KVM has an optmization to avoid
expensive MRS read/writes on VMENTER/EXIT. It caches the MSR values
and restores them either when leaving the run loop, on preemption or
when going out to user space. MSR_TSX_AUX is part of that lazy MSR
set, so after writing the guest value and before the lazy restore any
exception using the paranoid entry will read the guest value and use
it as CPU number to retrieve the GSBASE value for the current CPU when
FSGSBASE is enabled. As RDPID is only used in that particular entry
path, there is no reason to burden VMENTER/EXIT with two extra MSR
writes. Remove the RDPID optimization, which is not even backed by
numbers from the paranoid entry path instead"
* tag 'x86-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry/64: Do not use RDPID in paranoid entry to accomodate KVM
broken down bandwith counters.
-----BEGIN PGP SIGNATURE-----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=vF1u
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fix from Thomas Gleixner:
"A single update for perf on x86 which has support for the broken down
bandwith counters"
* tag 'perf-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Add BW counters for GT, IA and IO breakdown
- Enforce NX on RO data in mixed EFI mode
- Destroy workqueue in an error handling path to prevent UAF
- Stop argument parser at '--' which is the delimiter for init
- Treat a NULL command line pointer as empty instead of dereferncing it
unconditionally.
- Handle an unterminated command line correctly
- Cleanup the 32bit code leftovers and remove obsolete documentation
-----BEGIN PGP SIGNATURE-----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=+nbs
-----END PGP SIGNATURE-----
Merge tag 'efi-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Thomas Gleixner:
- Enforce NX on RO data in mixed EFI mode
- Destroy workqueue in an error handling path to prevent UAF
- Stop argument parser at '--' which is the delimiter for init
- Treat a NULL command line pointer as empty instead of dereferncing it
unconditionally.
- Handle an unterminated command line correctly
- Cleanup the 32bit code leftovers and remove obsolete documentation
* tag 'efi-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation: efi: remove description of efi=old_map
efi/x86: Move 32-bit code into efi_32.c
efi/libstub: Handle unterminated cmdline
efi/libstub: Handle NULL cmdline
efi/libstub: Stop parsing arguments at "--"
efi: add missed destroy_workqueue when efisubsys_init fails
efi/x86: Mark kernel rodata non-executable for mixed mode
* selftests fix for new binutils
* MMU notifier fix for arm64
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl9ARnoUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroP2YAf/dgLrPm4y4jxm7Aiz3/txqrHEwogT
ZtvnzqUPb6+vkFrkop8QMOPw7A8NCfkn3/6sWbyUN5ObgOG1pxKyPraeN3ZdsDoR
KGwv6P0dKgI8B4UuGEMe9GazXv+oOv8+bSUJnE+HZiUHzJKlX4HJbxDwUhvSSatY
qYCZb/Uzqundh79TYULa7oI1/3F15A2J1zQPe4QgkToH9tsVB8PVfkH5uPJPp64M
DTm5+qgwwsBULFaAuuo3FTs9f3pWJxn8GOuico1Sm+RnR53mhbUJggUfFzP0rwzZ
Emevunje5r1rluFs+JWeNtflGH0gI4CLak7jvlOOBjrNb5XJgUSbzLXxkA==
=Jwic
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
- PAE and PKU bugfixes for x86
- selftests fix for new binutils
- MMU notifier fix for arm64
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: arm64: Only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is not set
KVM: Pass MMU notifier range flags to kvm_unmap_hva_range()
kvm: x86: Toggling CR4.PKE does not load PDPTEs in PAE mode
kvm: x86: Toggling CR4.SMAP does not load PDPTEs in PAE mode
KVM: x86: fix access code passed to gva_to_gpa
selftests: kvm: Use a shorter encoding to clear RAX
In many cases, task_struct.comm isn't enough to distinguish the
offender, since for interpreted languages it's likely just going to be
"python3" or whatever. Add the pid to make it unambiguous.
[ bp: Make the printk string a single line for easier grepping. ]
Signed-off-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/6f6fbd0ee6c99bc5e47910db700a6642159db01b.1598011595.git.chris@chrisdown.name
Applications which manipulate MSRs from userspace often do so
infrequently, and all at once. As such, the default printk ratelimit
architecture supplied by pr_err_ratelimited() doesn't do enough to prevent
kmsg becoming completely overwhelmed with their messages and pushing
other salient information out of the circular buffer.
In one case, I saw over 80% of kmsg being filled with these messages,
and the default kmsg buffer being completely filled less than 5 minutes
after boot(!).
Make things much less aggressive, while still achieving the original
goal of fiter_write(). Operators will still get warnings that MSRs are
being manipulated from userspace, but they won't have other also
potentially useful messages pushed out of the kmsg buffer.
Of course, one can boot with `allow_writes=1` to avoid these messages at
all, but that then has the downfall that one doesn't get _any_
notification at all about these problems in the first place, and so is
much less likely to forget to fix it.
One might rather it was less binary: it was still logged, just less
often, so that application developers _do_ have the incentive to improve
their current methods, without the kernel having to push other useful
stuff out of the kmsg buffer.
This one example isn't the point, of course: I'm sure there are plenty
of other non-ideal-but-pragmatic cases where people are writing to MSRs
from userspace right now, and it will take time for those people to find
other solutions.
Overall, keep the intent of the original patch, while mitigating its
sometimes heavy effects on kmsg composition.
[ bp: Massage a bit. ]
Signed-off-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/563994ef132ce6cffd28fc659254ca37d032b5ef.1598011595.git.chris@chrisdown.name
The 'flags' field of 'struct mmu_notifier_range' is used to indicate
whether invalidate_range_{start,end}() are permitted to block. In the
case of kvm_mmu_notifier_invalidate_range_start(), this field is not
forwarded on to the architecture-specific implementation of
kvm_unmap_hva_range() and therefore the backend cannot sensibly decide
whether or not to block.
Add an extra 'flags' parameter to kvm_unmap_hva_range() so that
architectures are aware as to whether or not they are permitted to block.
Cc: <stable@vger.kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <20200811102725.7121-2-will@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCX0ALjQAKCRCAXGG7T9hj
voZ2AQCXYVDclEXoNwkD6sS0RuVSc4T6ypEzeGM6tP4Z/VInaAD/eJ8zP+aJx9wL
oeTPsOEJzAax6Xj/c+tQ7maCQdxFpQQ=
=K3yj
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.9-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"One build fix and a minor fix for suppressing a useless warning when
booting a Xen dom0 via UEFI"
* tag 'for-linus-5.9-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
Fix build error when CONFIG_ACPI is not set/enabled:
efi: avoid error message when booting under Xen
KVM has an optmization to avoid expensive MRS read/writes on
VMENTER/EXIT. It caches the MSR values and restores them either when
leaving the run loop, on preemption or when going out to user space.
The affected MSRs are not required for kernel context operations. This
changed with the recently introduced mechanism to handle FSGSBASE in the
paranoid entry code which has to retrieve the kernel GSBASE value by
accessing per CPU memory. The mechanism needs to retrieve the CPU number
and uses either LSL or RDPID if the processor supports it.
Unfortunately RDPID uses MSR_TSC_AUX which is in the list of cached and
lazily restored MSRs, which means between the point where the guest value
is written and the point of restore, MSR_TSC_AUX contains a random number.
If an NMI or any other exception which uses the paranoid entry path happens
in such a context, then RDPID returns the random guest MSR_TSC_AUX value.
As a consequence this reads from the wrong memory location to retrieve the
kernel GSBASE value. Kernel GS is used to for all regular this_cpu_*()
operations. If the GSBASE in the exception handler points to the per CPU
memory of a different CPU then this has the obvious consequences of data
corruption and crashes.
As the paranoid entry path is the only place which accesses MSR_TSX_AUX
(via RDPID) and the fallback via LSL is not significantly slower, remove
the RDPID alternative from the entry path and always use LSL.
The alternative would be to write MSR_TSC_AUX on every VMENTER and VMEXIT
which would be inflicting massive overhead on that code path.
[ tglx: Rewrote changelog ]
Fixes: eaad981291 ("x86/entry/64: Introduce the FIND_PERCPU_BASE macro")
Reported-by: Tom Lendacky <thomas.lendacky@amd.com>
Debugged-by: Tom Lendacky <thomas.lendacky@amd.com>
Suggested-by: Andy Lutomirski <luto@kernel.org>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200821105229.18938-1-pbonzini@redhat.com
arm64 requires a vcpu fd (KVM_HAS_DEVICE_ATTR vcpu ioctl) to probe
support for steal-time. However this is unnecessary, as only a KVM
fd is required, and it complicates userspace (userspace may prefer
delaying vcpu creation until after feature probing). Introduce a cap
that can be checked instead. While x86 can already probe steal-time
support with a kvm fd (KVM_GET_SUPPORTED_CPUID), we add the cap there
too for consistency.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20200804170604.42662-7-drjones@redhat.com
Current minimum required version of binutils is 2.23,
which supports CRC32 instruction mnemonic.
Replace the byte-wise specification of CRC32 with this proper mnemonic.
The compiler is now able to pass memory operand to the instruction,
so there is no need for a temporary register anymore.
Some examples of the improvement:
12a: 48 8b 08 mov (%rax),%rcx
12d: f2 48 0f 38 f1 f1 crc32q %rcx,%rsi
133: 48 83 c0 08 add $0x8,%rax
137: 48 39 d0 cmp %rdx,%rax
13a: 75 ee jne 12a <crc32c_intel_update+0x1a>
to:
125: f2 48 0f 38 f1 06 crc32q (%rsi),%rax
12b: 48 83 c6 08 add $0x8,%rsi
12f: 48 39 d6 cmp %rdx,%rsi
132: 75 f1 jne 125 <crc32c_intel_update+0x15>
and:
146: 0f b6 08 movzbl (%rax),%ecx
149: f2 0f 38 f0 f1 crc32b %cl,%esi
14e: 48 83 c0 01 add $0x1,%rax
152: 48 39 d0 cmp %rdx,%rax
155: 75 ef jne 146 <crc32c_intel_update+0x36>
to:
13b: f2 0f 38 f0 02 crc32b (%rdx),%eax
140: 48 83 c2 01 add $0x1,%rdx
144: 48 39 ca cmp %rcx,%rdx
147: 75 f2 jne 13b <crc32c_intel_update+0x2b>
As the compiler has some more freedom w.r.t. register allocation,
there is also a couple of reg-reg moves removed.
There are no hidden states for CRC32 insn, so there is no need to mark
assembly as volatile.
v2: Introduce CRC32_INST define.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
CC: Herbert Xu <herbert@gondor.apana.org.au>
CC: "David S. Miller" <davem@davemloft.net>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Ingo Molnar <mingo@redhat.com>
CC: Borislav Petkov <bp@alien8.de>
CC: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
... and fold handling of misaligned case into it.
Implementation note: we stash the "will we need to rol8 the sum in the end"
flag into the MSB of %rcx (the lower 32 bits are used for length); the rest
is pretty straightforward.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
All callers of these primitives will
* discard anything we might've copied in case of error
* ignore the csum value in case of error
* always pass 0xffffffff as the initial sum, so the
resulting csum value (in case of success, that is) will never be 0.
That suggest the following calling conventions:
* don't pass err_ptr - just return 0 on error.
* don't bother with zeroing destination, etc. in case of error
* don't pass the initial sum - just use 0xffffffff.
This commit does the minimal conversion in the instances of csum_and_copy_...();
the changes of actual asm code behind them are done later in the series.
Note that this asm code is often shared with csum_partial_copy_nocheck();
the difference is that csum_partial_copy_nocheck() passes 0 for initial
sum while csum_and_copy_..._user() pass 0xffffffff. Fortunately, we are
free to pass 0xffffffff in all cases and subsequent patches will use that
freedom without any special comments.
A part that could be split off: parisc and uml/i386 claimed to have
csum_and_copy_to_user() instances of their own, but those were identical
to the generic one, so we simply drop them. Not sure if it's worth
a separate commit...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
It's always 0. Note that we theoretically could use ~0U as well -
result will be the same modulo 0xffff, _if_ the damn thing did the
right thing for any value of initial sum; later we'll make use of
that when convenient.
However, unlike csum_and_copy_..._user(), there are instances that
did not work for arbitrary initial sums; c6x is one such.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
quite a few architectures have the same csum_partial_copy_nocheck() -
simply memcpy() the data and then return the csum of the copy.
hexagon, parisc, ia64, s390, um: explicitly spelled out that way.
arc, arm64, csky, h8300, m68k/nommu, microblaze, mips/GENERIC_CSUM, nds32,
nios2, openrisc, riscv, unicore32: end up picking the same thing spelled
out in lib/checksum.h (with varying amounts of perversions along the way).
everybody else (alpha, arm, c6x, m68k/mmu, mips/!GENERIC_CSUM, powerpc,
sh, sparc, x86, xtensa) have non-generic variants. For all except c6x
the declaration is in their asm/checksum.h. c6x uses the wrapper
from asm-generic/checksum.h that would normally lead to the lib/checksum.h
instance, but in case of c6x we end up using an asm function from arch/c6x
instead.
Screw that mess - have architectures with private instances define
_HAVE_ARCH_CSUM_AND_COPY in their asm/checksum.h and have the default
one right in net/checksum.h conditional on _HAVE_ARCH_CSUM_AND_COPY
*not* defined.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add emulation/spoofing of SLDT and STR for both 32- and 64-bit
processes.
Wine users have found a small number of Windows apps using SLDT that
were crashing when run on UMIP-enabled systems.
Originally-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Reported-by: Andreas Rammhold <andi@notmuch.email>
Signed-off-by: Brendan Shanks <bshanks@codeweavers.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Tested-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Link: https://lkml.kernel.org/r/20200710224525.21966-1-bshanks@codeweavers.com
The old _do_fork() helper is removed in favor of the new kernel_clone() helper.
The latter adheres to naming conventions for kernel internal syscall helpers.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: x86@kernel.org
Link: https://lore.kernel.org/r/20200819104655.436656-8-christian.brauner@ubuntu.com
Now that the old memmap code has been removed, some code that was left
behind in arch/x86/platform/efi/efi.c is only used for 32-bit builds,
which means it can live in efi_32.c as well. So move it over.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
When remapping the kernel rodata section RO in the EFI pagetables, the
protection flags that were used for the text section are being reused,
but the rodata section should not be marked executable.
Cc: <stable@vger.kernel.org>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200717194526.3452089-1-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The Extended Error Code Bitmap (xec_bitmap) for a Scalable MCA bank type
was intended to be used by the kernel to filter out invalid error codes
on a system. However, this is unnecessary after a few product releases
because the hardware will only report valid error codes. Thus, there's
no need for it with future systems.
Remove the xec_bitmap field and all references to it.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200720145353.43924-1-Yazen.Ghannam@amd.com
We have some really ancient debug printouts in the x86 boot image build code:
Setup is 14108 bytes (padded to 14336 bytes).
System is 8802 kB
CRC 27e909d4
None of these ever helped debug any sort of breakage that I know of, and they
clutter the build output.
Remove them - if anyone needs the see the various interim stages of this to
debug an obscure bug, they can add these printfs and more.
We still keep this one:
Kernel: arch/x86/boot/bzImage is ready (#19)
As a sentimental leftover, plus the '#19' build count tag is mildly useful.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: linux-kernel@vger.kernel.org
Cc: x86@kernel.org
../arch/x86/pci/xen.c: In function ‘pci_xen_init’:
../arch/x86/pci/xen.c:410:2: error: implicit declaration of function ‘acpi_noirq_set’; did you mean ‘acpi_irq_get’? [-Werror=implicit-function-declaration]
acpi_noirq_set();
Fixes: 88e9ca161c ("xen/pci: Use acpi_noirq_set() helper to avoid #ifdef")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: xen-devel@lists.xenproject.org
Cc: linux-pci@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
The header file algapi.h includes skbuff.h unnecessarily since
all we need is a forward declaration for struct sk_buff. This
patch removes that inclusion.
Unfortunately skbuff.h pulls in a lot of things and drivers over
the years have come to rely on it so this patch adds a lot of
missing inclusions that result from this.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since commits
c041b5ad86 ("x86, boot: Create a separate string.h file to provide standard string functions")
fb4cac573e ("x86, boot: Move memcmp() into string.h and string.c")
the decompressor stub has been using the compiler's builtin memcpy,
memset and memcmp functions, _except_ where it would likely have the
largest impact, in the decompression code itself.
Remove the #undef's of memcpy and memset in misc.c so that the
decompressor code also uses the compiler builtins.
The rationale given in the comment doesn't really apply: just because
some functions use the out-of-line version is no reason to not use the
builtin version in the rest.
Replace the comment with an explanation of why memzero and memmove are
being #define'd.
Drop the suggestion to #undef in boot/string.h as well: the out-of-line
versions are not really optimized versions, they're generic code that's
good enough for the preboot environment. The compiler will likely
generate better code for constant-size memcpy/memset/memcmp if it is
allowed to.
Most decompressors' performance is unchanged, with the exception of LZ4
and 64-bit ZSTD.
Before After ARCH
LZ4 73ms 10ms 32
LZ4 120ms 10ms 64
ZSTD 90ms 74ms 64
Measurements on QEMU on 2.2GHz Broadwell Xeon, using defconfig kernels.
Decompressor code size has small differences, with the largest being
that 64-bit ZSTD decreases just over 2k. The largest code size increase
was on 64-bit XZ, of about 400 bytes.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Suggested-by: Nick Terrell <nickrterrell@gmail.com>
Tested-by: Nick Terrell <nickrterrell@gmail.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
resctrl/core.c defines get_cache_id() for use in its cpu-hotplug
callbacks. This gets the id attribute of the cache at the corresponding
level of a CPU.
Later rework means this private function needs to be shared. Move
it to the header file.
The name conflicts with a different definition in intel_cacheinfo.c,
name it get_cpu_cacheinfo_id() to show its relation with
get_cpu_cacheinfo().
Now this is visible on other architectures, check the id attribute
has actually been set.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lkml.kernel.org/r/20200708163929.2783-11-james.morse@arm.com
Intel CPUs expect the cache bitmap provided by user-space to have on a
single span of 1s, whereas AMD can support bitmaps like 0xf00f. Arm's
MPAM support also allows sparse bitmaps.
Similarly, Intel CPUs check at least one bit set, whereas AMD CPUs are
quite happy with an empty bitmap. Arm's MPAM allows an empty bitmap.
To move resctrl out to /fs/, platform differences like this need to be
explained.
Add two resource properties arch_has_{empty,sparse}_bitmaps. Test these
around the relevant parts of cbm_validate().
Merging the validate calls causes AMD to gain the min_cbm_bits test
needed for Haswell, but as it always sets this value to 1, it will never
match.
[ bp: Massage commit message. ]
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lkml.kernel.org/r/20200708163929.2783-10-james.morse@arm.com
- Fix typos.
- Move the compiler barrier comment to the top, because it's valid for the
whole function, not just the legacy branch.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200818053130.GA3161093@gmail.com
Reviewed-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Now after arch_needs_linear has been added, the parse_bw() calls are
almost the same between AMD and Intel.
The difference is '!is_mba_sc()', which is not checked on AMD. This
will always be true on AMD CPUs as mba_sc cannot be enabled as
is_mba_linear() is false.
Removing this duplication means user-space visible behaviour and
error messages are not validated or generated in different places.
Reviewed-by : Babu Moger <babu.moger@amd.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lkml.kernel.org/r/20200708163929.2783-9-james.morse@arm.com
The configuration values user-space provides to the resctrl filesystem
are ABI. To make this work on another architecture, all the ABI bits
should be moved out of /arch/x86 and under /fs.
To do this, the differences between AMD and Intel CPUs needs to be
explained to resctrl via resource properties, instead of function
pointers that let the arch code accept subtly different values on
different platforms/architectures.
For MBA, Intel CPUs reject configuration attempts for non-linear
resources, whereas AMD ignore this field as its MBA resource is never
linear. To merge the parse/validate functions, this difference needs to
be explained.
Add struct rdt_membw::arch_needs_linear to indicate the arch code needs
the linear property to be true to configure this resource. AMD can set
this and delay_linear to false. Intel can set arch_needs_linear to
true to keep the existing "No support for non-linear MB domains" error
message for affected platforms.
[ bp: convert "we" etc to passive voice. ]
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20200708163929.2783-8-james.morse@arm.com
rdtgroup_tasks_assigned() and show_rdt_tasks() loop over threads testing
for a CTRL/MON group match by closid/rmid with the provided rdtgrp.
Further down the file are helpers to do this, move these further up and
make use of them here.
These helpers additionally check for alloc/mon capable. This is harmless
as rdtgroup_mkdir() tests these capable flags before allowing the config
directories to be created.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lkml.kernel.org/r/20200708163929.2783-7-james.morse@arm.com
mbm_handle_overflow() and cqm_handle_limbo() are both provided with
the domain's work_struct when called, but use get_domain_from_cpu()
to find the domain, along with the appropriate error handling.
container_of() saves some list walking and bitmap testing, use that
instead.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lkml.kernel.org/r/20200708163929.2783-5-james.morse@arm.com
The comment in rdtgroup_init() refers to the non existent function
rdt_mount(), which has now been renamed rdt_get_tree(). Fix the
comment.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lkml.kernel.org/r/20200708163929.2783-4-james.morse@arm.com
max_delay is used by x86's __get_mem_config_intel() as a local variable.
Remove it, replacing it with a local variable.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lkml.kernel.org/r/20200708163929.2783-3-james.morse@arm.com
Starts from Ice Lake, the TopDown metrics are directly available as
fixed counters and do not require generic counters. Also, the TopDown
metrics can be collected per thread. Extend the RDPMC usage to support
per-thread TopDown metrics.
The RDPMC index of the PERF_METRICS will be output if RDPMC users ask
for the RDPMC index of the metrics events.
To support per thread RDPMC TopDown, the metrics and slots counters have
to be saved/restored during the context switching.
The last_period and period_left are not used in the counting mode. Use
the fields for saved_metric and saved_slots.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200723171117.9918-12-kan.liang@linux.intel.com
Ice Lake supports the hardware TopDown metrics feature, which can free
up the scarce GP counters.
Update the event constraints for the metrics events. The metric counters
do not exist, which are mapped to a dummy offset. The sharing between
multiple users of the same metric without multiplexing is not allowed.
Implement set_topdown_event_period for Ice Lake. The values in
PERF_METRICS MSR are derived from the fixed counter 3. Both registers
should start from zero.
Implement update_topdown_event for Ice Lake. The metric is reported by
multiplying the metric (fraction) with slots. To maintain accurate
measurements, both registers are cleared for each update. The fixed
counter 3 should always be cleared before the PERF_METRICS.
Implement td_attr for the new metrics events and the new slots fixed
counter. Make them visible to the perf user tools.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200723171117.9918-11-kan.liang@linux.intel.com
The RDPMC base offset of fixed counters is hard-code. Use a meaningful
name to replace the magic number to improve the readability of the code.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200723171117.9918-10-kan.liang@linux.intel.com
Intro
=====
The TopDown Microarchitecture Analysis (TMA) Method is a structured
analysis methodology to identify critical performance bottlenecks in
out-of-order processors. Current perf has supported the method.
The method works well, but there is one problem. To collect the TopDown
events, several GP counters have to be used. If a user wants to collect
other events at the same time, the multiplexing probably be triggered,
which impacts the accuracy.
To free up the scarce GP counters, the hardware TopDown metrics feature
is introduced from Ice Lake. The hardware implements an additional
"metrics" register and a new Fixed Counter 3 that measures pipeline
"slots". The TopDown events can be calculated from them instead.
Events
======
The level 1 TopDown has four metrics. There is no event-code assigned to
the TopDown metrics. Four metric events are exported as separate perf
events, which map to the internal "metrics" counter register. Those
events do not exist in hardware, but can be allocated by the scheduler.
For the event mapping, a special 0x00 event code is used, which is
reserved for fake events. The metric events start from umask 0x10.
When setting up the metric events, they point to the Fixed Counter 3.
They have to be specially handled.
- Add the update_topdown_event() callback to read the additional metrics
MSR and generate the metrics.
- Add the set_topdown_event_period() callback to initialize metrics MSR
and the fixed counter 3.
- Add a variable n_metric_event to track the number of the accepted
metrics events. The sharing between multiple users of the same metric
without multiplexing is not allowed.
- Only enable/disable the fixed counter 3 when there are no other active
TopDown events, which avoid the unnecessary writing of the fixed
control register.
- Disable the PMU when reading the metrics event. The metrics MSR and
the fixed counter 3 are read separately. The values may be modified by
an NMI.
All four metric events don't support sampling. Since they will be
handled specially for event update, a flag PERF_X86_EVENT_TOPDOWN is
introduced to indicate this case.
The slots event can support both sampling and counting.
For counting, the flag is also applied.
For sampling, it will be handled normally as other normal events.
Groups
======
The slots event is required in a Topdown group.
To avoid reading the METRICS register multiple times, the metrics and
slots value can only be updated by slots event in a group.
All active slots and metrics events will be updated one time.
Therefore, the slots event must be before any metric events in a Topdown
group.
NMI
======
The METRICS related register may be overflow. The bit 48 of the STATUS
register will be set. If so, PERF_METRICS and Fixed counter 3 are
required to be reset. The patch also update all active slots and
metrics events in the NMI handler.
The update_topdown_event() has to read two registers separately. The
values may be modified by an NMI. PMU has to be disabled before calling
the function.
RDPMC
======
RDPMC is temporarily disabled. A later patch will enable it.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200723171117.9918-9-kan.liang@linux.intel.com
Currently, the if-else is used in the intel_pmu_disable/enable_event to
check the type of an event. It works well, but with more and more types
added later, e.g., perf metrics, compared to the switch statement, the
if-else may impair the readability of the code.
There is no harm to use the switch statement to replace the if-else
here. Also, some optimizing compilers may compile a switch statement
into a jump-table which is more efficient than if-else for a large
number of cases. The performance gain may not be observed for now,
because the number of cases is only 5, but the benefits may be observed
with more and more types added in the future.
Use switch to replace the if-else in the intel_pmu_disable/enable_event.
If the idx is invalid, print a warning.
For the case INTEL_PMC_IDX_FIXED_BTS in intel_pmu_disable_event, don't
need to check the event->attr.precise_ip. Use return for the case.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200723171117.9918-7-kan.liang@linux.intel.com
Bit 15 of the PERF_CAPABILITIES MSR indicates that the perf METRICS
feature is supported. The perf METRICS is not a PEBS feature.
Rename pebs_metrics_available perf_metrics.
The bit is not used in the current code. It will be used in a later
patch.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200723171117.9918-6-kan.liang@linux.intel.com
The bit 48 in the PERF_GLOBAL_STATUS is used to indicate the overflow
status of the PERF_METRICS counters.
Move the BTS index to the bit 47.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200723171117.9918-5-kan.liang@linux.intel.com
The fourth fixed counter, TOPDOWN.SLOTS, is introduced in Ice Lake to
measure the level 1 TopDown events.
Add MSR address and macros for the new fixed counter, which will be used
in a later patch.
Add comments to explain the event encoding rules for the fixed counters.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200723171117.9918-4-kan.liang@linux.intel.com
Magic numbers are used in the current NMI handler for the global status
bit. Use a meaningful name to replace the magic numbers to improve the
readability of the code.
Remove a Tab for all GLOBAL_STATUS_* and INTEL_PMC_IDX_FIXED_BTS macros
to reduce the length of the line.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200723171117.9918-3-kan.liang@linux.intel.com
The RDPMC index is always re-calculated for the RDPMC userspace support,
which is unnecessary.
The RDPMC index value is stored in the variable event_base_rdpmc for
the kernel usage, which can be used for RDPMC userspace support as well.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200723171117.9918-2-kan.liang@linux.intel.com
Current minimum required version of binutils is 2.23, which supports
XGETBV and XSETBV instruction mnemonics.
Replace the byte-wise specification of XGETBV and XSETBV with these
proper mnemonics.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200707174722.58651-1-ubizjak@gmail.com
See the SDM, volume 3, section 4.4.1:
If PAE paging would be in use following an execution of MOV to CR0 or
MOV to CR4 (see Section 4.1.1) and the instruction is modifying any of
CR0.CD, CR0.NW, CR0.PG, CR4.PAE, CR4.PGE, CR4.PSE, or CR4.SMEP; then
the PDPTEs are loaded from the address in CR3.
Fixes: b9baba8614 ("KVM, pkeys: expose CPUID/CR4 to guest")
Cc: Huaitong Han <huaitong.han@intel.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Message-Id: <20200817181655.3716509-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
See the SDM, volume 3, section 4.4.1:
If PAE paging would be in use following an execution of MOV to CR0 or
MOV to CR4 (see Section 4.1.1) and the instruction is modifying any of
CR0.CD, CR0.NW, CR0.PG, CR4.PAE, CR4.PGE, CR4.PSE, or CR4.SMEP; then
the PDPTEs are loaded from the address in CR3.
Fixes: 0be0226f07 ("KVM: MMU: fix SMAP virtualization")
Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Message-Id: <20200817181655.3716509-2-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The SERIALIZE instruction gives software a way to force the processor to
complete all modifications to flags, registers and memory from previous
instructions and drain all buffered writes to memory before the next
instruction is fetched and executed. Thus, it serves the purpose of
sync_core(). Use it when available.
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20200807032833.17484-1-ricardo.neri-calderon@linux.intel.com
Linux only has support to read total DDR reads and writes. Here we
add support to enable bandwidth breakdown-GT, IA and IO. Breakdown
of BW is important to debug and optimize memory access. This can also
be used for telemetry and improving the system software.The offsets for
GT, IA and IO are added and these free running counters can be accessed
via MMIO space.
The BW breakdown can be measured using the following cmd:
perf stat -e uncore_imc/gt_requests/,uncore_imc/ia_requests/,uncore_imc/io_requests/
30.57 MiB uncore_imc/gt_requests/
1346.13 MiB uncore_imc/ia_requests/
190.97 MiB uncore_imc/io_requests/
5.984572733 seconds time elapsed
BW/s = <gt,ia,io>_requests/time elapsed
Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200814022234.23605-1-vaibhav.shankar@intel.com
- Fix mitigation state sysfs output
- Fix an FPU xstate/sxave code assumption bug triggered by Architectural LBR support
- Fix Lightning Mountain SoC TSC frequency enumeration bug
- Fix kexec debug output
- Fix kexec memory range assumption bug
- Fix a boundary condition in the crash kernel code
- Optimize porgatory.ro generation a bit
- Enable ACRN guests to use X2APIC mode
- Reduce a __text_poke() IRQs-off critical section for the benefit of PREEMPT_RT
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=fvpv
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Misc fixes and small updates all around the place:
- Fix mitigation state sysfs output
- Fix an FPU xstate/sxave code assumption bug triggered by
Architectural LBR support
- Fix Lightning Mountain SoC TSC frequency enumeration bug
- Fix kexec debug output
- Fix kexec memory range assumption bug
- Fix a boundary condition in the crash kernel code
- Optimize porgatory.ro generation a bit
- Enable ACRN guests to use X2APIC mode
- Reduce a __text_poke() IRQs-off critical section for the benefit of
PREEMPT_RT"
* tag 'x86-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/alternatives: Acquire pte lock with interrupts enabled
x86/bugs/multihit: Fix mitigation reporting when VMX is not in use
x86/fpu/xstate: Fix an xstate size check warning with architectural LBRs
x86/purgatory: Don't generate debug info for purgatory.ro
x86/tsr: Fix tsc frequency enumeration bug on Lightning Mountain SoC
kexec_file: Correctly output debugging information for the PT_LOAD ELF header
kexec: Improve & fix crash_exclude_mem_range() to handle overlapping ranges
x86/crash: Correct the address boundary of function parameters
x86/acrn: Remove redundant chars from ACRN signature
x86/acrn: Allow ACRN guest to use X2APIC mode
plus a RAPL HW-enablement for Intel SPR platforms.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=NsxB
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Misc fixes, an expansion of perf syscall access to CAP_PERFMON
privileged tools, plus a RAPL HW-enablement for Intel SPR platforms"
* tag 'perf-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/rapl: Add support for Intel SPR platform
perf/x86/rapl: Support multiple RAPL unit quirks
perf/x86/rapl: Fix missing psys sysfs attributes
hw_breakpoint: Remove unused __register_perf_hw_breakpoint() declaration
kprobes: Remove show_registers() function prototype
perf/core: Take over CAP_SYS_PTRACE creds to CAP_PERFMON capability
The comment explaining why 4-level systems only need to allocate on
the P4D level caused some confustion. Update it to better explain why
on 4-level systems the allocation on PUD level is necessary.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200814151947.26229-3-joro@8bytes.org
Remove the code to sync the vmalloc and ioremap ranges for x86-64. The
page-table pages are all pre-allocated so that synchronization is
no longer necessary.
This is a patch that already went into the kernel as:
commit 8bb9bf242d ("x86/mm/64: Do not sync vmalloc/ioremap mappings")
But it had to be reverted later because it unveiled a bug from:
commit 6eb82f9940 ("x86/mm: Pre-allocate P4D/PUD pages for vmalloc area")
The bug in that commit causes the P4D/PUD pages not to be correctly
allocated, making the synchronization still necessary. That issue got
fixed meanwhile upstream:
commit 995909a4e2 ("x86/mm/64: Do not dereference non-present PGD entries")
With that fix it is safe again to remove the page-table synchronization
for vmalloc/ioremap ranges on x86-64.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200814151947.26229-2-joro@8bytes.org
pte_clear() et al are based on two paravirt steps today: one step to
create a page table entry with all zeroes, and one step to write this
entry value.
Drop the first step as it is completely useless.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200815100641.26362-7-jgross@suse.com
On x86 set_pte_at() is now always falling back to set_pte(). So instead
of having this fallback after the paravirt maze just drop the
set_pte_at paravirt operation and let set_pte_at() use the set_pte()
function directly.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200815100641.26362-6-jgross@suse.com
With 32-bit Xen PV support gone, the following commit is not needed
anymore:
a4c0e91d1d ("x86/entry/32: Fix XEN_PV build dependency")
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200815100641.26362-5-jgross@suse.com
There are some code parts using CONFIG_PARAVIRT for Xen pvops related
issues instead of the more stringent CONFIG_PARAVIRT_XXL.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200815100641.26362-4-jgross@suse.com
The last 32-bit user of stuff under CONFIG_PARAVIRT_XXL is gone.
Remove 32-bit specific parts.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200815100641.26362-2-jgross@suse.com
Since commit 61a47c1ad3 ("sysctl: Remove the sysctl system call"),
sys_sysctl is actually unavailable: any input can only return an error.
We have been warning about people using the sysctl system call for years
and believe there are no more users. Even if there are users of this
interface if they have not complained or fixed their code by now they
probably are not going to, so there is no point in warning them any
longer.
So completely remove sys_sysctl on all architectures.
[nixiaoming@huawei.com: s390: fix build error for sys_call_table_emu]
Link: http://lkml.kernel.org/r/20200618141426.16884-1-nixiaoming@huawei.com
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Will Deacon <will@kernel.org> [arm/arm64]
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Bin Meng <bin.meng@windriver.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: chenzefeng <chenzefeng2@huawei.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christian Brauner <christian@brauner.io>
Cc: Chris Zankel <chris@zankel.net>
Cc: David Howells <dhowells@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Diego Elio Pettenò <flameeyes@flameeyes.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kars de Jong <jongk@linux-m68k.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Nick Piggin <npiggin@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Paul Burton <paulburton@kernel.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Sven Schnelle <svens@stackframe.org>
Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Zhou Yanjie <zhouyanjie@wanyeetech.com>
Link: http://lkml.kernel.org/r/20200616030734.87257-1-nixiaoming@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Preparatory work to allow S390 to switch over to the generic VDSO
implementation.
S390 requires that the VDSO data pointer is handed in to the counter
read function when time namespace support is enabled. Adding the pointer
is a NOOP for all other architectures because the compiler is supposed
to optimize that out when it is unused in the architecture specific
inline. The change also solved a similar problem for MIPS which
fortunately has time namespaces not yet enabled.
S390 needs to update clock related VDSO data independent of the
timekeeping updates. This was solved so far with yet another sequence
counter in the S390 implementation. A better solution is to utilize the
already existing VDSO sequence count for this. The core code now exposes
helper functions which allow to serialize against the timekeeper code
and against concurrent readers.
S390 needs extra data for their clock readout function. The initial
common VDSO data structure did not provide a way to add that. It now has
an embedded architecture specific struct embedded which defaults to an
empty struct.
Doing this now avoids tree dependencies and conflicts post rc1 and
allows all other architectures which work on generic VDSO support to
work from a common upstream base.
- A trivial comment fix.
-----BEGIN PGP SIGNATURE-----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=y8Z5
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timekeeping updates from Thomas Gleixner:
"A set of timekeeping/VDSO updates:
- Preparatory work to allow S390 to switch over to the generic VDSO
implementation.
S390 requires that the VDSO data pointer is handed in to the
counter read function when time namespace support is enabled.
Adding the pointer is a NOOP for all other architectures because
the compiler is supposed to optimize that out when it is unused in
the architecture specific inline. The change also solved a similar
problem for MIPS which fortunately has time namespaces not yet
enabled.
S390 needs to update clock related VDSO data independent of the
timekeeping updates. This was solved so far with yet another
sequence counter in the S390 implementation. A better solution is
to utilize the already existing VDSO sequence count for this. The
core code now exposes helper functions which allow to serialize
against the timekeeper code and against concurrent readers.
S390 needs extra data for their clock readout function. The initial
common VDSO data structure did not provide a way to add that. It
now has an embedded architecture specific struct embedded which
defaults to an empty struct.
Doing this now avoids tree dependencies and conflicts post rc1 and
allows all other architectures which work on generic VDSO support
to work from a common upstream base.
- A trivial comment fix"
* tag 'timers-urgent-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Delete repeated words in comments
lib/vdso: Allow to add architecture-specific vdso data
timekeeping/vsyscall: Provide vdso_update_begin/end()
vdso/treewide: Add vdso_data pointer argument to __arch_get_hw_counter()
posix CPU timers into task work context. The tick interrupt is reduced to a
quick check which queues the work which is doing the heavy lifting before
returning to user space or going back to guest mode. Moving this out is
deferring the signal delivery slightly but posix CPU timers are inaccurate
by nature as they depend on the tick so there is no real damage. The
relevant test cases all passed.
This lifts the last offender for RT out of the hard interrupt context tick
handler, but it also has the general benefit that the actual heavy work is
accounted to the task/process and not to the tick interrupt itself.
Further optimizations are possible to break long sighand lock hold and
interrupt disabled (on !RT kernels) times when a massive amount of posix
CPU timers (which are unpriviledged) is armed for a task/process.
This is currently only enabled for x86 because the architecture has to
ensure that task work is handled in KVM before entering a guest, which was
just established for x86 with the new common entry/exit code which got
merged post 5.8 and is not the case for other KVM architectures.
-----BEGIN PGP SIGNATURE-----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=Reot
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more timer updates from Thomas Gleixner:
"A set of posix CPU timer changes which allows to defer the heavy work
of posix CPU timers into task work context. The tick interrupt is
reduced to a quick check which queues the work which is doing the
heavy lifting before returning to user space or going back to guest
mode. Moving this out is deferring the signal delivery slightly but
posix CPU timers are inaccurate by nature as they depend on the tick
so there is no real damage. The relevant test cases all passed.
This lifts the last offender for RT out of the hard interrupt context
tick handler, but it also has the general benefit that the actual
heavy work is accounted to the task/process and not to the tick
interrupt itself.
Further optimizations are possible to break long sighand lock hold and
interrupt disabled (on !RT kernels) times when a massive amount of
posix CPU timers (which are unpriviledged) is armed for a
task/process.
This is currently only enabled for x86 because the architecture has to
ensure that task work is handled in KVM before entering a guest, which
was just established for x86 with the new common entry/exit code which
got merged post 5.8 and is not the case for other KVM architectures"
* tag 'timers-core-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Select POSIX_CPU_TIMERS_TASK_WORK
posix-cpu-timers: Provide mechanisms to defer timer handling to task_work
posix-cpu-timers: Split run_posix_cpu_timers()
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCXzaSXAAKCRCAXGG7T9hj
vuSEAP4qOIv7Hr1wMJfTsN7ZoNNr/K6ph8ADcjFm9RGikn8MawD8CU/OfcFKJFwl
UVwM1HPnRG6pvCI9bmHS4WYrIBYBVw0=
=Bi6R
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.9-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull more xen updates from Juergen Gross:
- Remove support for running as 32-bit Xen PV-guest.
32-bit PV guests are rarely used, are lacking security fixes for
Meltdown, and can be easily replaced by PVH mode. Another series for
doing more cleanup will follow soon (removal of 32-bit-only pvops
functionality).
- Fixes and additional features for the Xen display frontend driver.
* tag 'for-linus-5.9-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
drm/xen-front: Pass dumb buffer data offset to the backend
xen: Sync up with the canonical protocol definition in Xen
drm/xen-front: Add YUYV to supported formats
drm/xen-front: Fix misused IS_ERR_OR_NULL checks
xen/gntdev: Fix dmabuf import with non-zero sgt offset
x86/xen: drop tests for highmem in pv code
x86/xen: eliminate xen-asm_64.S
x86/xen: remove 32-bit Xen PV guest support
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAl82Y6cTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXlcxCACP21ZI7RZvQBcFtTj5MWa0uwoofFqF
JDG0MvZ5zFKIJFX0pwlZIUrZY5aVJ1NwCDgCI0EXbZEazTaNCD2knFPqrLe3WUFY
mSDF9df7oW9UvTe9L4g3rYAdqsrkbgqhBypm9Vpbcazg/Ki6QVCgAhIo1lbq62+m
J2/0kLO1lVY6opr6vyobaWbm/Y4b0fbrx7N6KwUDhZUYGLGKaOc+WvsZinNl4XW6
VPiEVQUApvVxwG43rLNXjPe83DtassJ2GevSS1whXnZ+K0bViWhyYicbqEl9iV1i
nlNIkEMX5A1rdwV1zEAGyY/zWi+fi2+IdKGGEbtyUsely1vHtZuaDCiQ
=DE2Y
-----END PGP SIGNATURE-----
Merge tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyper-v fixes from Wei Liu:
- fix oops reporting on Hyper-V
- make objtool happy
* tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Make hv_setup_sched_clock inline
Drivers: hv: vmbus: Only notify Hyper-V for die events that are oops
syzbot found its way in 86_fsgsbase_read_task() and triggered this oops:
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 PID: 6866 Comm: syz-executor262 Not tainted 5.8.0-syzkaller #0
RIP: 0010:x86_fsgsbase_read_task+0x16d/0x310 arch/x86/kernel/process_64.c:393
Call Trace:
putreg32+0x3ab/0x530 arch/x86/kernel/ptrace.c:876
genregs32_set arch/x86/kernel/ptrace.c:1026 [inline]
genregs32_set+0xa4/0x100 arch/x86/kernel/ptrace.c:1006
copy_regset_from_user include/linux/regset.h:326 [inline]
ia32_arch_ptrace arch/x86/kernel/ptrace.c:1061 [inline]
compat_arch_ptrace+0x36c/0xd90 arch/x86/kernel/ptrace.c:1198
__do_compat_sys_ptrace kernel/ptrace.c:1420 [inline]
__se_compat_sys_ptrace kernel/ptrace.c:1389 [inline]
__ia32_compat_sys_ptrace+0x220/0x2f0 kernel/ptrace.c:1389
do_syscall_32_irqs_on arch/x86/entry/common.c:84 [inline]
__do_fast_syscall_32+0x57/0x80 arch/x86/entry/common.c:126
do_fast_syscall_32+0x2f/0x70 arch/x86/entry/common.c:149
entry_SYSENTER_compat_after_hwframe+0x4d/0x5c
This can happen if ptrace() or sigreturn() pokes an LDT selector into FS
or GS for a task with no LDT and something tries to read the base before
a return to usermode notices the bad selector and fixes it.
The fix is to make sure ldt pointer is not NULL.
Fixes: 07e1d88ada ("x86/fsgsbase/64: Fix ptrace() to read the FS/GS base accurately")
Co-developed-by: Jann Horn <jannh@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Markus T Metzger <markus.t.metzger@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Shankar <ravi.v.shankar@intel.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a linker script check that there are no run-time relocations, and
remove the old one that tries to check via looking for specially-named
sections in the object files.
Drop the tests for -fPIE compiler option and -pie linker option, as they
are available in all supported gcc and binutils versions (as well as
clang and lld).
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Fangrui Song <maskray@google.com>
Reviewed-by: Sedat Dilek <sedat.dilek@gmail.com>
Link: https://lore.kernel.org/r/20200731230820.1742553-8-keescook@chromium.org
The BFD linker generates run-time relocations for z_input_len and
z_output_len, even though they are absolute symbols.
This is fixed for binutils-2.35 [1]. Work around this for earlier
versions by defining two variables input_len and output_len in addition
to the symbols, and use them via position-independent references.
This eliminates the last two run-time relocations in the head code and
allows us to drop the -z noreloc-overflow flag to the linker.
Move the -pie and --no-dynamic-linker LDFLAGS to LDFLAGS_vmlinux instead
of KBUILD_LDFLAGS. There shouldn't be anything else getting linked, but
this is the more logical location for these flags, and modversions might
call the linker if an EXPORT_SYMBOL is left over accidentally in one of
the decompressors.
[1] https://sourceware.org/bugzilla/show_bug.cgi?id=25754
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Fangrui Song <maskray@google.com>
Link: https://lore.kernel.org/r/20200731230820.1742553-7-keescook@chromium.org
The assembly code in head_{32,64}.S, while meant to be
position-independent, generates run-time relocations because it uses
instructions such as:
leal gdt(%edx), %eax
which make the assembler and linker think that the code is using %edx as
an index into gdt, and hence gdt needs to be relocated to its run-time
address.
On 32-bit, with lld Dmitry Golovin reports that this results in a
link-time error with default options (i.e. unless -z notext is
explicitly passed):
LD arch/x86/boot/compressed/vmlinux
ld.lld: error: can't create dynamic relocation R_386_32 against local
symbol in readonly segment; recompile object files with -fPIC or pass
'-Wl,-z,notext' to allow text relocations in the output
With the BFD linker, this generates a warning during the build, if
--warn-shared-textrel is enabled, which at least Gentoo enables by
default:
LD arch/x86/boot/compressed/vmlinux
ld: arch/x86/boot/compressed/head_32.o: warning: relocation in read-only section `.head.text'
ld: warning: creating a DT_TEXTREL in object
On 64-bit, it is not possible to link the kernel as -pie with lld, and
it is only possible with a BFD linker that supports -z noreloc-overflow,
i.e. versions >2.26. This is because these instructions cannot really be
relocated: the displacement field is only 32-bits wide, and thus cannot
be relocated for a 64-bit load address. The -z noreloc-overflow option
simply overrides the linker error, and results in R_X86_64_RELATIVE
relocations that apply a 64-bit relocation to a 32-bit field anyway.
This happens to work because nothing will process these run-time
relocations.
Start fixing this by removing relocations from .head.text:
- On 32-bit, use a base register that holds the address of the GOT and
reference symbol addresses using @GOTOFF, i.e.
leal gdt@GOTOFF(%edx), %eax
- On 64-bit, most of the code can (and already does) use %rip-relative
addressing, however the .code32 bits can't, and the 64-bit code also
needs to reference symbol addresses as they will be after moving the
compressed kernel to the end of the decompression buffer.
For these cases, reference the symbols as an offset to startup_32 to
avoid creating relocations, i.e.:
leal (gdt-startup_32)(%bp), %eax
This only works in .head.text as the subtraction cannot be represented
as a PC-relative relocation unless startup_32 is in the same section
as the code. Move efi32_pe_entry into .head.text so that it can use
the same method to avoid relocations.
Reported-by: Dmitry Golovin <dima@golovin.in>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Fangrui Song <maskray@google.com>
Link: https://lore.kernel.org/r/20200731230820.1742553-6-keescook@chromium.org
GCC puts the main function into .text.startup when compiled with -Os (or
-O2). This results in arch/x86/boot/main.c having a .text.startup
section which is currently not included explicitly in the linker script
setup.ld in the same directory.
The BFD linker places this orphan section immediately after .text, so
this still works. However, LLD git, since [1], is choosing to place it
immediately after the .bstext section instead (this is the first code
section). This plays havoc with the section layout that setup.elf
requires to create the setup header, for eg on 64-bit:
LD arch/x86/boot/setup.elf
ld.lld: error: section .text.startup file range overlaps with .header
>>> .text.startup range is [0x200040, 0x2001FE]
>>> .header range is [0x2001EF, 0x20026B]
ld.lld: error: section .header file range overlaps with .bsdata
>>> .header range is [0x2001EF, 0x20026B]
>>> .bsdata range is [0x2001FF, 0x200398]
ld.lld: error: section .bsdata file range overlaps with .entrytext
>>> .bsdata range is [0x2001FF, 0x200398]
>>> .entrytext range is [0x20026C, 0x2002D3]
ld.lld: error: section .text.startup virtual address range overlaps
with .header
>>> .text.startup range is [0x40, 0x1FE]
>>> .header range is [0x1EF, 0x26B]
ld.lld: error: section .header virtual address range overlaps with
.bsdata
>>> .header range is [0x1EF, 0x26B]
>>> .bsdata range is [0x1FF, 0x398]
ld.lld: error: section .bsdata virtual address range overlaps with
.entrytext
>>> .bsdata range is [0x1FF, 0x398]
>>> .entrytext range is [0x26C, 0x2D3]
ld.lld: error: section .text.startup load address range overlaps with
.header
>>> .text.startup range is [0x40, 0x1FE]
>>> .header range is [0x1EF, 0x26B]
ld.lld: error: section .header load address range overlaps with
.bsdata
>>> .header range is [0x1EF, 0x26B]
>>> .bsdata range is [0x1FF, 0x398]
ld.lld: error: section .bsdata load address range overlaps with
.entrytext
>>> .bsdata range is [0x1FF, 0x398]
>>> .entrytext range is [0x26C, 0x2D3]
Add .text.* to the .text output section to fix this, and also prevent
any future surprises if the compiler decides to create other such
sections.
[1] https://reviews.llvm.org/D75225
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Fangrui Song <maskray@google.com>
Link: https://lore.kernel.org/r/20200731230820.1742553-5-keescook@chromium.org
In a previous patch, we have eliminated GOT entries from the decompressor
binary and added an assertion that the .got section is empty. This means
that the GOT fixup routines that exist in both the 32-bit and 64-bit
startup routines have become dead code, and can be removed.
While at it, drop the KEEP() from the linker script, as it has no effect
on the contents of output sections that are created by the linker itself.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200731230820.1742553-4-keescook@chromium.org
Eliminate all GOT entries in the decompressor binary, by forcing hidden
visibility for all symbol references, which informs the compiler that
such references will be resolved at link time without the need for
allocating GOT entries.
To ensure that no GOT entries will creep back in, add an assertion to
the decompressor linker script that will fire if the .got section has
a non-zero size.
[Arvind: move hidden.h to include/linux instead of making a copy]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200731230820.1742553-3-keescook@chromium.org
The .got.plt section contains the part of the GOT which is used by PLT
entries, and which gets updated lazily by the dynamic loader when
function calls are dispatched through those PLT entries.
On fully linked binaries such as the kernel proper or the decompressor,
this never happens, and so in practice, the .got.plt section consists
only of the first 3 magic entries that are meant to point at the _DYNAMIC
section and at the fixup routine in the loader. However, since we don't
use a dynamic loader, those entries are never populated or used.
This means that treating those entries like ordinary GOT entries, and
updating their values based on the actual placement of the executable in
memory is completely pointless, and we can just ignore the .got.plt
section entirely, provided that it has no additional entries beyond
the first 3 ones.
So add an assertion in the linker script to ensure that this assumption
holds, and move the contents out of the [_got, _egot) memory range that
is modified by the GOT fixup routines.
While at it, drop the KEEP(), since it has no effect on the contents
of output sections that are created by the linker itself.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200731230820.1742553-2-keescook@chromium.org
Intel SPR platform uses fixed 16 bit energy unit for DRAM RAPL domain,
and fixed 0 bit energy unit for Psys RAPL domain.
After this, on SPR platform the energy counters appear in perf list.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Len Brown <len.brown@intel.com>
Link: https://lore.kernel.org/r/20200811153149.12242-4-rui.zhang@intel.com
There will be more platforms with different fixed energy units.
Enhance the code to support different RAPL unit quirks for different
platforms.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Link: https://lore.kernel.org/r/20200811153149.12242-3-rui.zhang@intel.com
This fixes a problem introduced by commit:
5fb5273a90 ("perf/x86/rapl: Use new MSR detection interface")
that perf event sysfs attributes for psys RAPL domain are missing.
Fixes: 5fb5273a90 ("perf/x86/rapl: Use new MSR detection interface")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20200811153149.12242-2-rui.zhang@intel.com
pte lock is never acquired in-IRQ context so it does not require interrupts
to be disabled. The lock is a regular spinlock which cannot be acquired
with interrupts disabled on RT.
RT complains about pte_lock() in __text_poke() because it's invoked after
disabling interrupts.
__text_poke() has to disable interrupts as use_temporary_mm() expects
interrupts to be off because it invokes switch_mm_irqs_off() and uses
per-CPU (current active mm) data.
Move the PTE lock handling outside the interrupt disabled region.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by; Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20200813105026.bvugytmsso6muljw@linutronix.de
* Improvements and bugfixes for secure VM support, giving reduced startup
time and memory hotplug support.
* Locking fixes in nested KVM code
* Increase number of guests supported by HV KVM to 4094
* Preliminary POWER10 support
ARM:
* Split the VHE and nVHE hypervisor code bases, build the EL2 code
separately, allowing for the VHE code to now be built with instrumentation
* Level-based TLB invalidation support
* Restructure of the vcpu register storage to accomodate the NV code
* Pointer Authentication available for guests on nVHE hosts
* Simplification of the system register table parsing
* MMU cleanups and fixes
* A number of post-32bit cleanups and other fixes
MIPS:
* compilation fixes
x86:
* bugfixes
* support for the SERIALIZE instruction
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl8yfuQUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNweQgAiEycRbpifAueihK3ScKwYcCFhbHg
n6KLiFCY3sJRg+ORNb9EuFPJgGygV8DPKbEMvKaGDhNpX3rOpSIrpi5QQ5Hx+WOj
WHg+aX8Eyy1ys7V84UbiMeZKUbKDDRr0/UOUtJEsF4hiD7s0FgobbQhC/3+awp5k
sdSTMYlXelep+pjdFX7cNIgjrBNFtqH0ECeuDCcQzDg2zlH+poEPyLaC5+U4RF6r
pfvcxd6xp50fobo8ro7kMuBeclG3JxLjqqdNrkkHcF1DxROMLLKN7CjHZchYC/BK
c+S7JHLFnafxiTncMLhv3s4viey05mohW6SxeLw4qcWHfFlz+qyfZwMvZA==
=d/GI
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more KVM updates from Paolo Bonzini:
"PPC:
- Improvements and bugfixes for secure VM support, giving reduced
startup time and memory hotplug support.
- Locking fixes in nested KVM code
- Increase number of guests supported by HV KVM to 4094
- Preliminary POWER10 support
ARM:
- Split the VHE and nVHE hypervisor code bases, build the EL2 code
separately, allowing for the VHE code to now be built with
instrumentation
- Level-based TLB invalidation support
- Restructure of the vcpu register storage to accomodate the NV code
- Pointer Authentication available for guests on nVHE hosts
- Simplification of the system register table parsing
- MMU cleanups and fixes
- A number of post-32bit cleanups and other fixes
MIPS:
- compilation fixes
x86:
- bugfixes
- support for the SERIALIZE instruction"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (70 commits)
KVM: MIPS/VZ: Fix build error caused by 'kvm_run' cleanup
x86/kvm/hyper-v: Synic default SCONTROL MSR needs to be enabled
MIPS: KVM: Convert a fallthrough comment to fallthrough
MIPS: VZ: Only include loongson_regs.h for CPU_LOONGSON64
x86: Expose SERIALIZE for supported cpuid
KVM: x86: Don't attempt to load PDPTRs when 64-bit mode is enabled
KVM: arm64: Move S1PTW S2 fault logic out of io_mem_abort()
KVM: arm64: Don't skip cache maintenance for read-only memslots
KVM: arm64: Handle data and instruction external aborts the same way
KVM: arm64: Rename kvm_vcpu_dabt_isextabt()
KVM: arm: Add trace name for ARM_NISV
KVM: arm64: Ensure that all nVHE hyp code is in .hyp.text
KVM: arm64: Substitute RANDOMIZE_BASE for HARDEN_EL2_VECTORS
KVM: arm64: Make nVHE ASLR conditional on RANDOMIZE_BASE
KVM: PPC: Book3S HV: Rework secure mem slot dropping
KVM: PPC: Book3S HV: Move kvmppc_svm_page_out up
KVM: PPC: Book3S HV: Migrate hot plugged memory
KVM: PPC: Book3S HV: In H_SVM_INIT_DONE, migrate remaining normal-GFNs to secure-GFNs
KVM: PPC: Book3S HV: Track the state GFNs associated with secure VMs
KVM: PPC: Book3S HV: Disable page merging in H_SVM_INIT_START
...
Merge more updates from Andrew Morton:
- most of the rest of MM (memcg, hugetlb, vmscan, proc, compaction,
mempolicy, oom-kill, hugetlbfs, migration, thp, cma, util,
memory-hotplug, cleanups, uaccess, migration, gup, pagemap),
- various other subsystems (alpha, misc, sparse, bitmap, lib, bitops,
checkpatch, autofs, minix, nilfs, ufs, fat, signals, kmod, coredump,
exec, kdump, rapidio, panic, kcov, kgdb, ipc).
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (164 commits)
mm/gup: remove task_struct pointer for all gup code
mm: clean up the last pieces of page fault accountings
mm/xtensa: use general page fault accounting
mm/x86: use general page fault accounting
mm/sparc64: use general page fault accounting
mm/sparc32: use general page fault accounting
mm/sh: use general page fault accounting
mm/s390: use general page fault accounting
mm/riscv: use general page fault accounting
mm/powerpc: use general page fault accounting
mm/parisc: use general page fault accounting
mm/openrisc: use general page fault accounting
mm/nios2: use general page fault accounting
mm/nds32: use general page fault accounting
mm/mips: use general page fault accounting
mm/microblaze: use general page fault accounting
mm/m68k: use general page fault accounting
mm/ia64: use general page fault accounting
mm/hexagon: use general page fault accounting
mm/csky: use general page fault accounting
...
Use the general page fault accounting by passing regs into
handle_mm_fault().
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Link: http://lkml.kernel.org/r/20200707225021.200906-23-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm: Page fault accounting cleanups", v5.
This is v5 of the pf accounting cleanup series. It originates from Gerald
Schaefer's report on an issue a week ago regarding to incorrect page fault
accountings for retried page fault after commit 4064b98270 ("mm: allow
VM_FAULT_RETRY for multiple times"):
https://lore.kernel.org/lkml/20200610174811.44b94525@thinkpad/
What this series did:
- Correct page fault accounting: we do accounting for a page fault
(no matter whether it's from #PF handling, or gup, or anything else)
only with the one that completed the fault. For example, page fault
retries should not be counted in page fault counters. Same to the
perf events.
- Unify definition of PERF_COUNT_SW_PAGE_FAULTS: currently this perf
event is used in an adhoc way across different archs.
Case (1): for many archs it's done at the entry of a page fault
handler, so that it will also cover e.g. errornous faults.
Case (2): for some other archs, it is only accounted when the page
fault is resolved successfully.
Case (3): there're still quite some archs that have not enabled
this perf event.
Since this series will touch merely all the archs, we unify this
perf event to always follow case (1), which is the one that makes most
sense. And since we moved the accounting into handle_mm_fault, the
other two MAJ/MIN perf events are well taken care of naturally.
- Unify definition of "major faults": the definition of "major
fault" is slightly changed when used in accounting (not
VM_FAULT_MAJOR). More information in patch 1.
- Always account the page fault onto the one that triggered the page
fault. This does not matter much for #PF handlings, but mostly for
gup. More information on this in patch 25.
Patchset layout:
Patch 1: Introduced the accounting in handle_mm_fault(), not enabled.
Patch 2-23: Enable the new accounting for arch #PF handlers one by one.
Patch 24: Enable the new accounting for the rest outliers (gup, iommu, etc.)
Patch 25: Cleanup GUP task_struct pointer since it's not needed any more
This patch (of 25):
This is a preparation patch to move page fault accountings into the
general code in handle_mm_fault(). This includes both the per task
flt_maj/flt_min counters, and the major/minor page fault perf events. To
do this, the pt_regs pointer is passed into handle_mm_fault().
PERF_COUNT_SW_PAGE_FAULTS should still be kept in per-arch page fault
handlers.
So far, all the pt_regs pointer that passed into handle_mm_fault() is
NULL, which means this patch should have no intented functional change.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200707225021.200906-1-peterx@redhat.com
Link: http://lkml.kernel.org/r/20200707225021.200906-2-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
segment_eq is only used to implement uaccess_kernel. Just open code
uaccess_kernel in the arch uaccess headers and remove one layer of
indirection.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Greentime Hu <green.hu@gmail.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Link: http://lkml.kernel.org/r/20200710135706.537715-5-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is to introduce a general dummy helper. memory_add_physaddr_to_nid()
is a fallback option to get the nid in case NUMA_NO_NID is detected.
After this patch, arm64/sh/s390 can simply use the general dummy version.
PowerPC/x86/ia64 will still use their specific version.
This is the preparation to set a fallback value for dev_dax->target_node.
Signed-off-by: Jia He <justin.he@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Chuhong Yuan <hslester96@gmail.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Cc: Kaly Xin <Kaly.Xin@arm.com>
Link: http://lkml.kernel.org/r/20200710031619.18762-2-justin.he@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some of our servers spend significant time at kernel boot initializing
memory block sysfs directories and then creating symlinks between them and
the corresponding nodes. The slowness happens because the machines get
stuck with the smallest supported memory block size on x86 (128M), which
results in 16,288 directories to cover the 2T of installed RAM. The
search for each memory block is noticeable even with commit 4fb6eabf10
("drivers/base/memory.c: cache memory blocks in xarray to accelerate
lookup").
Commit 078eb6aa50 ("x86/mm/memory_hotplug: determine block size based on
the end of boot memory") chooses the block size based on alignment with
memory end. That addresses hotplug failures in qemu guests, but for bare
metal systems whose memory end isn't aligned to even the smallest size, it
leaves them at 128M.
Make kernels that aren't running on a hypervisor use the largest supported
size (2G) to minimize overhead on big machines. Kernel boot goes 7%
faster on the aforementioned servers, shaving off half a second.
[daniel.m.jordan@oracle.com: v3]
Link: http://lkml.kernel.org/r/20200714205450.945834-1-daniel.m.jordan@oracle.com
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Sistare <steven.sistare@oracle.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20200609225451.3542648-1-daniel.m.jordan@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
IRQ bypass support for vdpa and IFC
MLX5 vdpa driver
Endian-ness fixes for virtio drivers
Misc other fixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl8yVEwPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpNPEH/0Dtq1s1V4r/kxtLUoMophv9wuORpWCr98BQ
2aOveTmwTOVdZVOiw2tzTgO9nbWx+cL2HvkU7Aajfpz5hh93Z2VOo2n4a7hBC79f
rlc3GXiG+pMk5RfmqGofIHTU+D6ony4D5SXlUDurLdtEwunyuqZwABiWkZjdclZJ
bv90IL8Upzbz0rxYr7k3z8UepdOCt7r4QS/o7STHZBjJRyylxmO/R2yTnh6PtpRK
Q/z35wJBJ3SKc8X3Fi0VOOSeGNZOiypkkl9ZnLVY5lExNAU1+2MMn2UK119SlCDV
MSxb7quYFF4cksXH1g77GMBNi1uADRh1dtFMZdkKhZGljGxKLxo=
=6VTZ
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- IRQ bypass support for vdpa and IFC
- MLX5 vdpa driver
- Endianness fixes for virtio drivers
- Misc other fixes
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (71 commits)
vdpa/mlx5: fix up endian-ness for mtu
vdpa: Fix pointer math bug in vdpasim_get_config()
vdpa/mlx5: Fix pointer math in mlx5_vdpa_get_config()
vdpa/mlx5: fix memory allocation failure checks
vdpa/mlx5: Fix uninitialised variable in core/mr.c
vdpa_sim: init iommu lock
virtio_config: fix up warnings on parisc
vdpa/mlx5: Add VDPA driver for supported mlx5 devices
vdpa/mlx5: Add shared memory registration code
vdpa/mlx5: Add support library for mlx5 VDPA implementation
vdpa/mlx5: Add hardware descriptive header file
vdpa: Modify get_vq_state() to return error code
net/vdpa: Use struct for set/get vq state
vdpa: remove hard coded virtq num
vdpasim: support batch updating
vhost-vdpa: support IOTLB batching hints
vhost-vdpa: support get/set backend features
vhost: generialize backend features setting/getting
vhost-vdpa: refine ioctl pre-processing
vDPA: dont change vq irq after DRIVER_OK
...
Including:
- Removal of the dev->archdata.iommu (or similar) pointers from
most architectures. Only Sparc is left, but this is private to
Sparc as their drivers don't use the IOMMU-API.
- ARM-SMMU Updates from Will Deacon:
- Support for SMMU-500 implementation in Marvell
Armada-AP806 SoC
- Support for SMMU-500 implementation in NVIDIA Tegra194 SoC
- DT compatible string updates
- Remove unused IOMMU_SYS_CACHE_ONLY flag
- Move ARM-SMMU drivers into their own subdirectory
- Intel VT-d Updates from Lu Baolu:
- Misc tweaks and fixes for vSVA
- Report/response page request events
- Cleanups
- Move the Kconfig and Makefile bits for the AMD and Intel
drivers into their respective subdirectory.
- MT6779 IOMMU Support
- Support for new chipsets in the Renesas IOMMU driver
- Other misc cleanups and fixes (e.g. to improve compile test
coverage)
-----BEGIN PGP SIGNATURE-----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=3O2Z
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Remove of the dev->archdata.iommu (or similar) pointers from most
architectures. Only Sparc is left, but this is private to Sparc as
their drivers don't use the IOMMU-API.
- ARM-SMMU updates from Will Deacon:
- Support for SMMU-500 implementation in Marvell Armada-AP806 SoC
- Support for SMMU-500 implementation in NVIDIA Tegra194 SoC
- DT compatible string updates
- Remove unused IOMMU_SYS_CACHE_ONLY flag
- Move ARM-SMMU drivers into their own subdirectory
- Intel VT-d updates from Lu Baolu:
- Misc tweaks and fixes for vSVA
- Report/response page request events
- Cleanups
- Move the Kconfig and Makefile bits for the AMD and Intel drivers into
their respective subdirectory.
- MT6779 IOMMU Support
- Support for new chipsets in the Renesas IOMMU driver
- Other misc cleanups and fixes (e.g. to improve compile test coverage)
* tag 'iommu-updates-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (77 commits)
iommu/amd: Move Kconfig and Makefile bits down into amd directory
iommu/vt-d: Move Kconfig and Makefile bits down into intel directory
iommu/arm-smmu: Move Arm SMMU drivers into their own subdirectory
iommu/vt-d: Skip TE disabling on quirky gfx dedicated iommu
iommu: Add gfp parameter to io_pgtable_ops->map()
iommu: Mark __iommu_map_sg() as static
iommu/vt-d: Rename intel-pasid.h to pasid.h
iommu/vt-d: Add page response ops support
iommu/vt-d: Report page request faults for guest SVA
iommu/vt-d: Add a helper to get svm and sdev for pasid
iommu/vt-d: Refactor device_to_iommu() helper
iommu/vt-d: Disable multiple GPASID-dev bind
iommu/vt-d: Warn on out-of-range invalidation address
iommu/vt-d: Fix devTLB flush for vSVA
iommu/vt-d: Handle non-page aligned address
iommu/vt-d: Fix PASID devTLB invalidation
iommu/vt-d: Remove global page support in devTLB flush
iommu/vt-d: Enforce PASID devTLB field mask
iommu: Make some functions static
iommu/amd: Remove double zero check
...
With support for 32-bit pv guests gone pure pv-code no longer needs to
test for highmem. Dropping those tests removes the need for flushing
in some places.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
With 32-bit pv-guest support removed xen-asm_64.S can be merged with
xen-asm.S
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Xen is requiring 64-bit machines today and since Xen 4.14 it can be
built without 32-bit PV guest support. There is no need to carry the
burden of 32-bit PV guest support in the kernel any longer, as new
guests can be either HVM or PVH, or they can use a 64 bit kernel.
Remove the 32-bit Xen PV support from the kernel.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
- Untangle the header spaghetti which causes build failures in various
situations caused by the lockdep additions to seqcount to validate that
the write side critical sections are non-preemptible.
- The seqcount associated lock debug addons which were blocked by the
above fallout.
seqcount writers contrary to seqlock writers must be externally
serialized, which usually happens via locking - except for strict per
CPU seqcounts. As the lock is not part of the seqcount, lockdep cannot
validate that the lock is held.
This new debug mechanism adds the concept of associated locks.
sequence count has now lock type variants and corresponding
initializers which take a pointer to the associated lock used for
writer serialization. If lockdep is enabled the pointer is stored and
write_seqcount_begin() has a lockdep assertion to validate that the
lock is held.
Aside of the type and the initializer no other code changes are
required at the seqcount usage sites. The rest of the seqcount API is
unchanged and determines the type at compile time with the help of
_Generic which is possible now that the minimal GCC version has been
moved up.
Adding this lockdep coverage unearthed a handful of seqcount bugs which
have been addressed already independent of this.
While generaly useful this comes with a Trojan Horse twist: On RT
kernels the write side critical section can become preemtible if the
writers are serialized by an associated lock, which leads to the well
known reader preempts writer livelock. RT prevents this by storing the
associated lock pointer independent of lockdep in the seqcount and
changing the reader side to block on the lock when a reader detects
that a writer is in the write side critical section.
- Conversion of seqcount usage sites to associated types and initializers.
-----BEGIN PGP SIGNATURE-----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=7Gj+
-----END PGP SIGNATURE-----
Merge tag 'locking-urgent-2020-08-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Thomas Gleixner:
"A set of locking fixes and updates:
- Untangle the header spaghetti which causes build failures in
various situations caused by the lockdep additions to seqcount to
validate that the write side critical sections are non-preemptible.
- The seqcount associated lock debug addons which were blocked by the
above fallout.
seqcount writers contrary to seqlock writers must be externally
serialized, which usually happens via locking - except for strict
per CPU seqcounts. As the lock is not part of the seqcount, lockdep
cannot validate that the lock is held.
This new debug mechanism adds the concept of associated locks.
sequence count has now lock type variants and corresponding
initializers which take a pointer to the associated lock used for
writer serialization. If lockdep is enabled the pointer is stored
and write_seqcount_begin() has a lockdep assertion to validate that
the lock is held.
Aside of the type and the initializer no other code changes are
required at the seqcount usage sites. The rest of the seqcount API
is unchanged and determines the type at compile time with the help
of _Generic which is possible now that the minimal GCC version has
been moved up.
Adding this lockdep coverage unearthed a handful of seqcount bugs
which have been addressed already independent of this.
While generally useful this comes with a Trojan Horse twist: On RT
kernels the write side critical section can become preemtible if
the writers are serialized by an associated lock, which leads to
the well known reader preempts writer livelock. RT prevents this by
storing the associated lock pointer independent of lockdep in the
seqcount and changing the reader side to block on the lock when a
reader detects that a writer is in the write side critical section.
- Conversion of seqcount usage sites to associated types and
initializers"
* tag 'locking-urgent-2020-08-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
locking/seqlock, headers: Untangle the spaghetti monster
locking, arch/ia64: Reduce <asm/smp.h> header dependencies by moving XTP bits into the new <asm/xtp.h> header
x86/headers: Remove APIC headers from <asm/smp.h>
seqcount: More consistent seqprop names
seqcount: Compress SEQCNT_LOCKNAME_ZERO()
seqlock: Fold seqcount_LOCKNAME_init() definition
seqlock: Fold seqcount_LOCKNAME_t definition
seqlock: s/__SEQ_LOCKDEP/__SEQ_LOCK/g
hrtimer: Use sequence counter with associated raw spinlock
kvm/eventfd: Use sequence counter with associated spinlock
userfaultfd: Use sequence counter with associated spinlock
NFSv4: Use sequence counter with associated spinlock
iocost: Use sequence counter with associated spinlock
raid5: Use sequence counter with associated spinlock
vfs: Use sequence counter with associated spinlock
timekeeping: Use sequence counter with associated raw spinlock
xfrm: policy: Use sequence counters with associated lock
netfilter: nft_set_rbtree: Use sequence counter with associated rwlock
netfilter: conntrack: Use sequence counter with associated spinlock
sched: tasks: Use sequence counter with associated spinlock
...
Based on an analysis of the HyperV firmwares (Gen1 and Gen2) it seems
like the SCONTROL is not being set to the ENABLED state as like we have
thought.
Also from a test done by Vitaly Kuznetsov, running a nested HyperV it
was concluded that the first access to the SCONTROL MSR with a read
resulted with the value of 0x1, aka HV_SYNIC_CONTROL_ENABLE.
It's important to note that this diverges from the value states in the
HyperV TLFS of 0.
Signed-off-by: Jon Doron <arilou@gmail.com>
Message-Id: <20200717125238.1103096-2-arilou@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- run the checker (e.g. sparse) after the compiler
- remove unneeded cc-option tests for old compiler flags
- fix tar-pkg to install dtbs
- introduce ccflags-remove-y and asflags-remove-y syntax
- allow to trace functions in sub-directories of lib/
- introduce hostprogs-always-y and userprogs-always-y syntax
- various Makefile cleanups
-----BEGIN PGP SIGNATURE-----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=bkNQ
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- run the checker (e.g. sparse) after the compiler
- remove unneeded cc-option tests for old compiler flags
- fix tar-pkg to install dtbs
- introduce ccflags-remove-y and asflags-remove-y syntax
- allow to trace functions in sub-directories of lib/
- introduce hostprogs-always-y and userprogs-always-y syntax
- various Makefile cleanups
* tag 'kbuild-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: stop filtering out $(GCC_PLUGINS_CFLAGS) from cc-option base
kbuild: include scripts/Makefile.* only when relevant CONFIG is enabled
kbuild: introduce hostprogs-always-y and userprogs-always-y
kbuild: sort hostprogs before passing it to ifneq
kbuild: move host .so build rules to scripts/gcc-plugins/Makefile
kbuild: Replace HTTP links with HTTPS ones
kbuild: trace functions in subdirectories of lib/
kbuild: introduce ccflags-remove-y and asflags-remove-y
kbuild: do not export LDFLAGS_vmlinux
kbuild: always create directories of targets
powerpc/boot: add DTB to 'targets'
kbuild: buildtar: add dtbs support
kbuild: remove cc-option test of -ffreestanding
kbuild: remove cc-option test of -fno-stack-protector
Revert "kbuild: Create directory for target DTB"
kbuild: run the checker after the compiler
The SERIALIZE instruction is supported by Tntel processors, like
Sapphire Rapids. SERIALIZE is a faster serializing instruction which
does not modify registers, arithmetic flags or memory, will not cause VM
exit. It's availability is indicated by CPUID.(EAX=7,ECX=0):ECX[bit 14].
Expose it in KVM supported CPUID. This way, KVM could pass this
information to guests and they can make use of these features accordingly.
Signed-off-by: Cathy Zhang <cathy.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Don't attempt to load PDPTRs if EFER.LME=1, i.e. if 64-bit mode is
enabled. A recent change to reload the PDTPRs when CR0.CD or CR0.NW is
toggled botched the EFER.LME handling and sends KVM down the PDTPR path
when is_paging() is true, i.e. when the guest toggles CD/NW in 64-bit
mode.
Split the CR0 checks for 64-bit vs. 32-bit PAE into separate paths. The
64-bit path is specifically checking state when paging is toggled on,
i.e. CR0.PG transititions from 0->1. The PDPTR path now needs to run if
the new CR0 state has paging enabled, irrespective of whether paging was
already enabled. Trying to shave a few cycles to make the PDPTR path an
"else if" case is a mess.
Fixes: d42e3fae6f ("kvm: x86: Read PDPTEs on CR0.CD and CR0.NW changes")
Cc: Jim Mattson <jmattson@google.com>
Cc: Oliver Upton <oupton@google.com>
Cc: Peter Shier <pshier@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200714015732.32426-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- The biggest news in that the tracing ring buffer can now time events that
interrupted other ring buffer events. Before this change, if an interrupt
came in while recording another event, and that interrupt also had an
event, those events would all have the same time stamp as the event it
interrupted. Now, with the new design, those events will have a unique time
stamp and rightfully display the time for those events that were recorded
while interrupting another event.
- Bootconfig how has an "override" operator that lets the users have a
default config, but then add options to override the default.
- A fix was made to properly filter function graph tracing to the ftrace
PIDs. This came in at the end of the -rc cycle, and needs to be backported.
- Several clean ups, performance updates, and minor fixes as well.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXy3GOBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qphsAP9ci1jtrC2+cMBMCNKb/AFpA/nDaKsD
hpsDzvD0YPOmCAEA9QbZset8wUNG49R4FexP7egQ8Ad2S6Oa5f60jWleDQY=
=lH+q
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- The biggest news in that the tracing ring buffer can now time events
that interrupted other ring buffer events.
Before this change, if an interrupt came in while recording another
event, and that interrupt also had an event, those events would all
have the same time stamp as the event it interrupted.
Now, with the new design, those events will have a unique time stamp
and rightfully display the time for those events that were recorded
while interrupting another event.
- Bootconfig how has an "override" operator that lets the users have a
default config, but then add options to override the default.
- A fix was made to properly filter function graph tracing to the
ftrace PIDs. This came in at the end of the -rc cycle, and needs to
be backported.
- Several clean ups, performance updates, and minor fixes as well.
* tag 'trace-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (39 commits)
tracing: Add trace_array_init_printk() to initialize instance trace_printk() buffers
kprobes: Fix compiler warning for !CONFIG_KPROBES_ON_FTRACE
tracing: Use trace_sched_process_free() instead of exit() for pid tracing
bootconfig: Fix to find the initargs correctly
Documentation: bootconfig: Add bootconfig override operator
tools/bootconfig: Add testcases for value override operator
lib/bootconfig: Add override operator support
kprobes: Remove show_registers() function prototype
tracing/uprobe: Remove dead code in trace_uprobe_register()
kprobes: Fix NULL pointer dereference at kprobe_ftrace_handler
ftrace: Fix ftrace_trace_task return value
tracepoint: Use __used attribute definitions from compiler_attributes.h
tracepoint: Mark __tracepoint_string's __used
trace : Have tracing buffer info use kvzalloc instead of kzalloc
tracing: Remove outdated comment in stack handling
ftrace: Do not let direct or IPMODIFY ftrace_ops be added to module and set trampolines
ftrace: Setup correct FTRACE_FL_REGS flags for module
tracing/hwlat: Honor the tracing_cpumask
tracing/hwlat: Drop the duplicate assignment in start_kthread()
tracing: Save one trace_event->type by using __TRACE_LAST_TYPE
...
Pull fdpick coredump update from Al Viro:
"Switches fdpic coredumps away from original aout dumping primitives to
the same kind of regset use as regular elf coredumps do"
* 'work.fdpic' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
[elf-fdpic] switch coredump to regsets
[elf-fdpic] use elf_dump_thread_status() for the dumper thread as well
[elf-fdpic] move allocation of elf_thread_status into elf_dump_thread_status()
[elf-fdpic] coredump: don't bother with cyclic list for per-thread objects
kill elf_fpxregs_t
take fdpic-related parts of elf_prstatus out
unexport linux/elfcore.h
Merge misc updates from Andrew Morton:
- a few MM hotfixes
- kthread, tools, scripts, ntfs and ocfs2
- some of MM
Subsystems affected by this patch series: kthread, tools, scripts, ntfs,
ocfs2 and mm (hofixes, pagealloc, slab-generic, slab, slub, kcsan,
debug, pagecache, gup, swap, shmem, memcg, pagemap, mremap, mincore,
sparsemem, vmalloc, kasan, pagealloc, hugetlb and vmscan).
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (162 commits)
mm: vmscan: consistent update to pgrefill
mm/vmscan.c: fix typo
khugepaged: khugepaged_test_exit() check mmget_still_valid()
khugepaged: retract_page_tables() remember to test exit
khugepaged: collapse_pte_mapped_thp() protect the pmd lock
khugepaged: collapse_pte_mapped_thp() flush the right range
mm/hugetlb: fix calculation of adjust_range_if_pmd_sharing_possible
mm: thp: replace HTTP links with HTTPS ones
mm/page_alloc: fix memalloc_nocma_{save/restore} APIs
mm/page_alloc.c: skip setting nodemask when we are in interrupt
mm/page_alloc: fallbacks at most has 3 elements
mm/page_alloc: silence a KASAN false positive
mm/page_alloc.c: remove unnecessary end_bitidx for [set|get]_pfnblock_flags_mask()
mm/page_alloc.c: simplify pageblock bitmap access
mm/page_alloc.c: extract the common part in pfn_to_bitidx()
mm/page_alloc.c: replace the definition of NR_MIGRATETYPE_BITS with PB_migratetype_bits
mm/shuffle: remove dynamic reconfiguration
mm/memory_hotplug: document why shuffle_zone() is relevant
mm/page_alloc: remove nr_free_pagecache_pages()
mm: remove vm_total_pages
...
After removal of CONFIG_HAVE_MEMBLOCK_NODE_MAP we have two equivalent
functions that call memory_present() for each region in memblock.memory:
sparse_memory_present_with_active_regions() and membocks_present().
Moreover, all architectures have a call to either of these functions
preceding the call to sparse_init() and in the most cases they are called
one after the other.
Mark the regions from memblock.memory as present during sparce_init() by
making sparse_init() call memblocks_present(), make memblocks_present()
and memory_present() functions static and remove redundant
sparse_memory_present_with_active_regions() function.
Also remove no longer required HAVE_MEMORY_PRESENT configuration option.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200712083130.22919-1-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are many instances where vmemap allocation is often switched between
regular memory and device memory just based on whether altmap is available
or not. vmemmap_alloc_block_buf() is used in various platforms to
allocate vmemmap mappings. Lets also enable it to handle altmap based
device memory allocation along with existing regular memory allocations.
This will help in avoiding the altmap based allocation switch in many
places. To summarize there are two different methods to call
vmemmap_alloc_block_buf().
vmemmap_alloc_block_buf(size, node, NULL) /* Allocate from system RAM */
vmemmap_alloc_block_buf(size, node, altmap) /* Allocate from altmap */
This converts altmap_alloc_block_buf() into a static function, drops it's
entry from the header and updates Documentation/vm/memory-model.rst.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Jia He <justin.he@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Will Deacon <will@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Yu Zhao <yuzhao@google.com>
Link: http://lkml.kernel.org/r/1594004178-8861-3-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "arm64: Enable vmemmap mapping from device memory", v4.
This series enables vmemmap backing memory allocation from device memory
ranges on arm64. But before that, it enables vmemmap_populate_basepages()
and vmemmap_alloc_block_buf() to accommodate struct vmem_altmap based
alocation requests.
This patch (of 3):
vmemmap_populate_basepages() is used across platforms to allocate backing
memory for vmemmap mapping. This is used as a standard default choice or
as a fallback when intended huge pages allocation fails. This just
creates entire vmemmap mapping with base pages (PAGE_SIZE).
On arm64 platforms, vmemmap_populate_basepages() is called instead of the
platform specific vmemmap_populate() when ARM64_SWAPPER_USES_SECTION_MAPS
is not enabled as in case for ARM64_16K_PAGES and ARM64_64K_PAGES configs.
At present vmemmap_populate_basepages() does not support allocating from
driver defined struct vmem_altmap while trying to create vmemmap mapping
for a device memory range. It prevents ARM64_16K_PAGES and
ARM64_64K_PAGES configs on arm64 from supporting device memory with
vmemap_altmap request.
This enables vmem_altmap support in vmemmap_populate_basepages() unlocking
device memory allocation for vmemap mapping on arm64 platforms with 16K or
64K base page configs.
Each architecture should evaluate and decide on subscribing device memory
based base page allocation through vmemmap_populate_basepages(). Hence
lets keep it disabled on all archs in order to preserve the existing
semantics. A subsequent patch enables it on arm64.
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Jia He <justin.he@arm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Yu Zhao <yuzhao@google.com>
Link: http://lkml.kernel.org/r/1594004178-8861-1-git-send-email-anshuman.khandual@arm.com
Link: http://lkml.kernel.org/r/1594004178-8861-2-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Most architectures define pgd_free() as a wrapper for free_page().
Provide a generic version in asm-generic/pgalloc.h and enable its use for
most architectures.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Matthew Wilcox <willy@infradead.org>
Link: http://lkml.kernel.org/r/20200627143453.31835-7-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Several architectures define pud_alloc_one() as a wrapper for
__get_free_page() and pud_free() as a wrapper for free_page().
Provide a generic implementation in asm-generic/pgalloc.h and use it where
appropriate.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Matthew Wilcox <willy@infradead.org>
Link: http://lkml.kernel.org/r/20200627143453.31835-6-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For most architectures that support >2 levels of page tables,
pmd_alloc_one() is a wrapper for __get_free_pages(), sometimes with
__GFP_ZERO and sometimes followed by memset(0) instead.
More elaborate versions on arm64 and x86 account memory for the user page
tables and call to pgtable_pmd_page_ctor() as the part of PMD page
initialization.
Move the arm64 version to include/asm-generic/pgalloc.h and use the
generic version on several architectures.
The pgtable_pmd_page_ctor() is a NOP when ARCH_ENABLE_SPLIT_PMD_PTLOCK is
not enabled, so there is no functional change for most architectures
except of the addition of __GFP_ACCOUNT for allocation of user page
tables.
The pmd_free() is a wrapper for free_page() in all the cases, so no
functional change here.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Link: http://lkml.kernel.org/r/20200627143453.31835-5-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm: cleanup usage of <asm/pgalloc.h>"
Most architectures have very similar versions of pXd_alloc_one() and
pXd_free_one() for intermediate levels of page table. These patches add
generic versions of these functions in <asm-generic/pgalloc.h> and enable
use of the generic functions where appropriate.
In addition, functions declared and defined in <asm/pgalloc.h> headers are
used mostly by core mm and early mm initialization in arch and there is no
actual reason to have the <asm/pgalloc.h> included all over the place.
The first patch in this series removes unneeded includes of
<asm/pgalloc.h>
In the end it didn't work out as neatly as I hoped and moving
pXd_alloc_track() definitions to <asm-generic/pgalloc.h> would require
unnecessary changes to arches that have custom page table allocations, so
I've decided to move lib/ioremap.c to mm/ and make pgalloc-track.h local
to mm/.
This patch (of 8):
In most cases <asm/pgalloc.h> header is required only for allocations of
page table memory. Most of the .c files that include that header do not
use symbols declared in <asm/pgalloc.h> and do not require that header.
As for the other header files that used to include <asm/pgalloc.h>, it is
possible to move that include into the .c file that actually uses symbols
from <asm/pgalloc.h> and drop the include from the header file.
The process was somewhat automated using
sed -i -E '/[<"]asm\/pgalloc\.h/d' \
$(grep -L -w -f /tmp/xx \
$(git grep -E -l '[<"]asm/pgalloc\.h'))
where /tmp/xx contains all the symbols defined in
arch/*/include/asm/pgalloc.h.
[rppt@linux.ibm.com: fix powerpc warning]
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Link: http://lkml.kernel.org/r/20200627143453.31835-1-rppt@kernel.org
Link: http://lkml.kernel.org/r/20200627143453.31835-2-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As said by Linus:
A symmetric naming is only helpful if it implies symmetries in use.
Otherwise it's actively misleading.
In "kzalloc()", the z is meaningful and an important part of what the
caller wants.
In "kzfree()", the z is actively detrimental, because maybe in the
future we really _might_ want to use that "memfill(0xdeadbeef)" or
something. The "zero" part of the interface isn't even _relevant_.
The main reason that kzfree() exists is to clear sensitive information
that should not be leaked to other future users of the same memory
objects.
Rename kzfree() to kfree_sensitive() to follow the example of the recently
added kvfree_sensitive() and make the intention of the API more explicit.
In addition, memzero_explicit() is used to clear the memory to make sure
that it won't get optimized away by the compiler.
The renaming is done by using the command sequence:
git grep -w --name-only kzfree |\
xargs sed -i 's/kzfree/kfree_sensitive/'
followed by some editing of the kfree_sensitive() kerneldoc and adding
a kzfree backward compatibility macro in slab.h.
[akpm@linux-foundation.org: fs/crypto/inline_crypt.c needs linux/slab.h]
[akpm@linux-foundation.org: fix fs/crypto/inline_crypt.c some more]
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Joe Perches <joe@perches.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: "Jason A . Donenfeld" <Jason@zx2c4.com>
Link: http://lkml.kernel.org/r/20200616154311.12314-3-longman@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCXyzfRgAKCRCAXGG7T9hj
vtYfAQCiqT8MBvwTpqsiu2si0ceyBZ7y8cuEqOMvqPTH0N1bYQD+JD1mMN2WjR0d
nKWwy/i8lXudBsDqY4N81WWBh+FMPA4=
=Lb6P
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.9-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- two trivial comment fixes
- a small series for the Xen balloon driver fixing some issues
- a series of the Xen privcmd driver targeting elimination of using
get_user_pages*() in this driver
- a series for the Xen swiotlb driver cleaning it up and adding support
for letting the kernel run as dom0 on Rpi4
* tag 'for-linus-5.9-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/arm: call dma_to_phys on the dma_addr_t parameter of dma_cache_maint
xen/arm: introduce phys/dma translations in xen_dma_sync_for_*
swiotlb-xen: introduce phys_to_dma/dma_to_phys translations
swiotlb-xen: remove XEN_PFN_PHYS
swiotlb-xen: add struct device * parameter to is_xen_swiotlb_buffer
swiotlb-xen: add struct device * parameter to xen_dma_sync_for_device
swiotlb-xen: add struct device * parameter to xen_dma_sync_for_cpu
swiotlb-xen: add struct device * parameter to xen_bus_to_phys
swiotlb-xen: add struct device * parameter to xen_phys_to_bus
swiotlb-xen: remove start_dma_addr
swiotlb-xen: use vmalloc_to_page on vmalloc virt addresses
Revert "xen/balloon: Fix crash when ballooning on x86 32 bit PAE"
xen/balloon: make the balloon wait interruptible
xen/balloon: fix accounting in alloc_xenballooned_pages error path
xen: hypercall.h: fix duplicated word
xen/gntdev: gntdev.h: drop a duplicated word
xen/privcmd: Convert get_user_pages*() to pin_user_pages*()
xen/privcmd: Mark pages as dirty
xen/privcmd: Corrected error handling path
Pull init and set_fs() cleanups from Al Viro:
"Christoph's 'getting rid of ksys_...() uses under KERNEL_DS' series"
* 'hch.init_path' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (50 commits)
init: add an init_dup helper
init: add an init_utimes helper
init: add an init_stat helper
init: add an init_mknod helper
init: add an init_mkdir helper
init: add an init_symlink helper
init: add an init_link helper
init: add an init_eaccess helper
init: add an init_chmod helper
init: add an init_chown helper
init: add an init_chroot helper
init: add an init_chdir helper
init: add an init_rmdir helper
init: add an init_unlink helper
init: add an init_umount helper
init: add an init_mount helper
init: mark create_dev as __init
init: mark console_on_rootfs as __init
init: initialize ramdisk_execute_command at compile time
devtmpfs: refactor devtmpfsd()
...
Pull ptrace regset updates from Al Viro:
"Internal regset API changes:
- regularize copy_regset_{to,from}_user() callers
- switch to saner calling conventions for ->get()
- kill user_regset_copyout()
The ->put() side of things will have to wait for the next cycle,
unfortunately.
The balance is about -1KLoC and replacements for ->get() instances are
a lot saner"
* 'work.regset' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (41 commits)
regset: kill user_regset_copyout{,_zero}()
regset(): kill ->get_size()
regset: kill ->get()
csky: switch to ->regset_get()
xtensa: switch to ->regset_get()
parisc: switch to ->regset_get()
nds32: switch to ->regset_get()
nios2: switch to ->regset_get()
hexagon: switch to ->regset_get()
h8300: switch to ->regset_get()
openrisc: switch to ->regset_get()
riscv: switch to ->regset_get()
c6x: switch to ->regset_get()
ia64: switch to ->regset_get()
arc: switch to ->regset_get()
arm: switch to ->regset_get()
sh: convert to ->regset_get()
arm64: switch to ->regset_get()
mips: switch to ->regset_get()
sparc: switch to ->regset_get()
...
The code for preallocate_vmalloc_pages() was written under the
assumption that the p4d_offset() and pud_offset() functions will perform
present checks before dereferencing the parent entries.
This assumption is wrong an leads to a bug in the code which causes the
physical address found in the PGD be used as a page-table page, even if
the PGD is not present.
So the code flow currently is:
pgd = pgd_offset_k(addr);
p4d = p4d_offset(pgd, addr);
if (p4d_none(*p4d))
p4d = p4d_alloc(&init_mm, pgd, addr);
This lacks a check for pgd_none() at least, the correct flow would be:
pgd = pgd_offset_k(addr);
if (pgd_none(*pgd))
p4d = p4d_alloc(&init_mm, pgd, addr);
else
p4d = p4d_offset(pgd, addr);
But this is the same flow that the p4d_alloc() and the pud_alloc()
functions use internally, so there is no need to duplicate them.
Remove the p?d_none() checks from the function and just call into
p4d_alloc() and pud_alloc() to correctly pre-allocate the PGD entries.
Reported-and-tested-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Fixes: 6eb82f9940 ("x86/mm: Pre-allocate P4D/PUD pages for vmalloc area")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On systems that have virtualization disabled or unsupported, sysfs
mitigation for X86_BUG_ITLB_MULTIHIT is reported incorrectly as:
$ cat /sys/devices/system/cpu/vulnerabilities/itlb_multihit
KVM: Vulnerable
System is not vulnerable to DoS attack from a rogue guest when
virtualization is disabled or unsupported in the hardware. Change the
mitigation reporting for these cases.
Fixes: b8e8c8303f ("kvm: mmu: ITLB_MULTIHIT mitigation")
Reported-by: Nelson Dsouza <nelson.dsouza@linux.intel.com>
Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/0ba029932a816179b9d14a30db38f0f11ef1f166.1594925782.git.pawan.kumar.gupta@linux.intel.com
An xstate size check warning is triggered on machines which support
Architectural LBRs.
XSAVE consistency problem, dumping leaves
WARNING: CPU: 0 PID: 0 at arch/x86/kernel/fpu/xstate.c:649 fpu__init_system_xstate+0x4d4/0xd0e
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted intel-arch_lbr+
RIP: 0010:fpu__init_system_xstate+0x4d4/0xd0e
The xstate size check routine, init_xstate_size(), compares the size
retrieved from the hardware with the size of task->fpu, which is
calculated by the software.
The size from the hardware is the total size of the enabled xstates in
XCR0 | IA32_XSS. Architectural LBR state is a dynamic supervisor
feature, which sets the corresponding bit in the IA32_XSS at boot time.
The size from the hardware includes the size of the Architectural LBR
state.
However, a dynamic supervisor feature doesn't allocate a buffer in the
task->fpu. The size of task->fpu doesn't include the size of the
Architectural LBR state. The mismatch will trigger the warning.
Three options as below were considered to fix the issue:
- Correct the size from the hardware by subtracting the size of the
dynamic supervisor features.
The purpose of the check is to compare the size CPU told with the size
of the XSAVE buffer, which is calculated by the software. If the
software mucks with the number from hardware, it removes the value of
the check.
This option is not a good option.
- Prevent the hardware from counting the size of the dynamic supervisor
feature by temporarily removing the corresponding bits in IA32_XSS.
Two extra MSR writes are required to flip the IA32_XSS. The option is
not pretty, but it is workable. The check is only called once at early
boot time. The synchronization or context-switching doesn't need to be
worried.
This option is implemented here.
- Remove the check entirely, because the check hasn't found any real
problems. The option may be an alternative as option 2.
This option is not implemented here.
Add a new function, get_xsaves_size_no_dynamic(), which retrieves the
total size without the dynamic supervisor features from the hardware.
The size will be used to compare with the size of task->fpu.
Fixes: f0dccc9da4 ("x86/fpu/xstate: Support dynamic supervisor feature for LBR")
Reported-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Link: https://lore.kernel.org/r/1595253051-75374-1-git-send-email-kan.liang@linux.intel.com
Purgatory.ro is a standalone binary that is not linked against the rest of
the kernel. Its image is copied into an array that is linked to the
kernel, and from there kexec relocates it wherever it desires.
Unlike the debug info for vmlinux, which can be used for analyzing crash
such info is useless in purgatory.ro. And discarding them can save about
200K space.
Original:
259080 kexec-purgatory.o
Stripped debug info:
29152 kexec-purgatory.o
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Acked-by: Dave Young <dyoung@redhat.com>
Link: https://lore.kernel.org/r/1596433788-3784-1-git-send-email-kernelfans@gmail.com
Frequency descriptor of Lightning Mountain SoC doesn't have all the
frequency entries so resulting in the below failure causing a kernel hang:
Error MSR_FSB_FREQ index 15 is unknown
tsc: Fast TSC calibration failed
So, add all the frequency entries in the Lightning Mountain SoC frequency
descriptor.
Fixes: 0cc5359d8f ("x86/cpu: Update init data for new Airmont CPU model")
Fixes: 812c2d7506 ("x86/tsc_msr: Use named struct initializers")
Signed-off-by: Dilip Kota <eswara.kota@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/211c643ae217604b46cbec43a2c0423946dc7d2d.1596440057.git.eswara.kota@linux.intel.com
Let's carefully handle the boundary of the function parameter to make
sure that the arguments passed doesn't exceed the address range.
Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Young <dyoung@redhat.com>
Link: https://lore.kernel.org/r/20200804044933.1973-2-lijiang@redhat.com
hypervisor_cpuid_base() only handles 12 chars of the hypervisor
signature string but is provided with 14 chars.
Remove the redundancy. Additionally, replace the user space uint32_t
with preferred kernel type u32.
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20200806114111.9448-1-shuo.a.liu@intel.com
The ACRN Hypervisor did not support x2APIC and thus x2APIC support was
disabled by always returning false when VM checked for x2APIC support.
ACRN received full support of x2APIC and exports the capability through
CPUID feature bits.
Let VM decide if it needs to switch to x2APIC mode according to CPUID
features.
Originally-by: Yakui Zhao <yakui.zhao@intel.com>
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20200806113802.9325-1-shuo.a.liu@intel.com
x86:
* Report last CPU for debugging
* Emulate smaller MAXPHYADDR in the guest than in the host
* .noinstr and tracing fixes from Thomas
* nested SVM page table switching optimization and fixes
Generic:
* Unify shadow MMU cache data structures across architectures
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl8pC+oUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNcOwgAjomqtEqQNlp7DdZT7VyyklzbxX1/
ud7v+oOJ8K4sFlf64lSthjPo3N9rzZCcw+yOXmuyuITngXOGc3tzIwXpCzpLtuQ1
WO1Ql3B/2dCi3lP5OMmsO1UAZqy9pKLg1dfeYUPk48P5+p7d/NPmk+Em5kIYzKm5
JsaHfCp2EEXomwmljNJ8PQ1vTjIQSSzlgYUBZxmCkaaX7zbEUMtxAQCStHmt8B84
33LczwXBm3viSWrzsoBV37I70+tseugiSGsCfUyupXOvq55d6D9FCqtCb45Hn4Vh
Ik8ggKdalsk/reiGEwNw1/3nr6mRMkHSbl+Mhc4waOIFf9dn0urgQgOaDg==
=YVx0
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"s390:
- implement diag318
x86:
- Report last CPU for debugging
- Emulate smaller MAXPHYADDR in the guest than in the host
- .noinstr and tracing fixes from Thomas
- nested SVM page table switching optimization and fixes
Generic:
- Unify shadow MMU cache data structures across architectures"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (127 commits)
KVM: SVM: Fix sev_pin_memory() error handling
KVM: LAPIC: Set the TDCR settable bits
KVM: x86: Specify max TDP level via kvm_configure_mmu()
KVM: x86/mmu: Rename max_page_level to max_huge_page_level
KVM: x86: Dynamically calculate TDP level from max level and MAXPHYADDR
KVM: VXM: Remove temporary WARN on expected vs. actual EPTP level mismatch
KVM: x86: Pull the PGD's level from the MMU instead of recalculating it
KVM: VMX: Make vmx_load_mmu_pgd() static
KVM: x86/mmu: Add separate helper for shadow NPT root page role calc
KVM: VMX: Drop a duplicate declaration of construct_eptp()
KVM: nSVM: Correctly set the shadow NPT root level in its MMU role
KVM: Using macros instead of magic values
MIPS: KVM: Fix build error caused by 'kvm_run' cleanup
KVM: nSVM: remove nonsensical EXITINFO1 adjustment on nested NPF
KVM: x86: Add a capability for GUEST_MAXPHYADDR < HOST_MAXPHYADDR support
KVM: VMX: optimize #PF injection when MAXPHYADDR does not match
KVM: VMX: Add guest physical address check in EPT violation and misconfig
KVM: VMX: introduce vmx_need_pf_intercept
KVM: x86: update exception bitmap on CPUID changes
KVM: x86: rename update_bp_intercept to update_exception_bitmap
...
This reverts commit 8bb9bf242d.
It seems the vmalloc page tables aren't always preallocated in all
situations, because Jason Donenfeld reports an oops with this commit:
BUG: unable to handle page fault for address: ffffe8ffffd00608
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP
CPU: 2 PID: 22 Comm: kworker/2:0 Not tainted 5.8.0+ #154
RIP: process_one_work+0x2c/0x2d0
Code: 41 56 41 55 41 54 55 48 89 f5 53 48 89 fb 48 83 ec 08 48 8b 06 4c 8b 67 40 49 89 c6 45 30 f6 a8 04 b8 00 00 00 00 4c 0f 44 f0 <49> 8b 46 08 44 8b a8 00 01 05
Call Trace:
worker_thread+0x4b/0x3b0
? rescuer_thread+0x360/0x360
kthread+0x116/0x140
? __kthread_create_worker+0x110/0x110
ret_from_fork+0x1f/0x30
CR2: ffffe8ffffd00608
and that page fault address is right in that vmalloc space, and we
clearly don't have a PGD/P4D entry for it.
Looking at the "Code:" line, the actual fault seems to come from the
'pwq->wq' dereference at the top of the process_one_work() function:
struct pool_workqueue *pwq = get_work_pwq(work);
struct worker_pool *pool = worker->pool;
bool cpu_intensive = pwq->wq->flags & WQ_CPU_INTENSIVE;
so 'struct pool_workqueue *pwq' is the allocation that hasn't been
synchronized across CPUs.
Just revert for now, while Joerg figures out the cause.
Reported-and-bisected-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Move POSIX CPU timer expiry and signal delivery into task context.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20200730102337.888613724@linutronix.de
The APIC headers are relatively complex and bring in additional
header dependencies - while smp.h is a relatively simple header
included from high level headers.
Remove the dependency and add in the missing #include's in .c
files where they gained it indirectly before.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
MIPS already uses and S390 will need the vdso data pointer in
__arch_get_hw_counter().
This works nicely as long as the architecture does not support time
namespaces in the VDSO. With time namespaces enabled the regular
accessor to the vdso data pointer __arch_get_vdso_data() will return the
namespace specific VDSO data page for tasks which are part of a
non-root time namespace. This would cause the architectures which need
the vdso data pointer in __arch_get_hw_counter() to access the wrong
vdso data page.
Add a vdso_data pointer argument to __arch_get_hw_counter() and hand it in
from the call sites in the core code. For architectures which do not need
the data pointer in their counter accessor function the compiler will just
optimize it out.
Fix up all existing architecture implementations and make MIPS utilize the
pointer instead of invoking the accessor function.
No functional change and no change in the resulting object code (except
MIPS).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/draft-87wo2ekuzn.fsf@nanos.tec.linutronix.de
Pull networking updates from David Miller:
1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan.
2) Support UDP segmentation in code TSO code, from Eric Dumazet.
3) Allow flashing different flash images in cxgb4 driver, from Vishal
Kulkarni.
4) Add drop frames counter and flow status to tc flower offloading,
from Po Liu.
5) Support n-tuple filters in cxgb4, from Vishal Kulkarni.
6) Various new indirect call avoidance, from Eric Dumazet and Brian
Vazquez.
7) Fix BPF verifier failures on 32-bit pointer arithmetic, from
Yonghong Song.
8) Support querying and setting hardware address of a port function via
devlink, use this in mlx5, from Parav Pandit.
9) Support hw ipsec offload on bonding slaves, from Jarod Wilson.
10) Switch qca8k driver over to phylink, from Jonathan McDowell.
11) In bpftool, show list of processes holding BPF FD references to
maps, programs, links, and btf objects. From Andrii Nakryiko.
12) Several conversions over to generic power management, from Vaibhav
Gupta.
13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry
Yakunin.
14) Various https url conversions, from Alexander A. Klimov.
15) Timestamping and PHC support for mscc PHY driver, from Antoine
Tenart.
16) Support bpf iterating over tcp and udp sockets, from Yonghong Song.
17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov.
18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan.
19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several
drivers. From Luc Van Oostenryck.
20) XDP support for xen-netfront, from Denis Kirjanov.
21) Support receive buffer autotuning in MPTCP, from Florian Westphal.
22) Support EF100 chip in sfc driver, from Edward Cree.
23) Add XDP support to mvpp2 driver, from Matteo Croce.
24) Support MPTCP in sock_diag, from Paolo Abeni.
25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic
infrastructure, from Jakub Kicinski.
26) Several pci_ --> dma_ API conversions, from Christophe JAILLET.
27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel.
28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki.
29) Refactor a lot of networking socket option handling code in order to
avoid set_fs() calls, from Christoph Hellwig.
30) Add rfc4884 support to icmp code, from Willem de Bruijn.
31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei.
32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin.
33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin.
34) Support TCP syncookies in MPTCP, from Flowian Westphal.
35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano
Brivio.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits)
net: thunderx: initialize VF's mailbox mutex before first usage
usb: hso: remove bogus check for EINPROGRESS
usb: hso: no complaint about kmalloc failure
hso: fix bailout in error case of probe
ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM
selftests/net: relax cpu affinity requirement in msg_zerocopy test
mptcp: be careful on subflow creation
selftests: rtnetlink: make kci_test_encap() return sub-test result
selftests: rtnetlink: correct the final return value for the test
net: dsa: sja1105: use detected device id instead of DT one on mismatch
tipc: set ub->ifindex for local ipv6 address
ipv6: add ipv6_dev_find()
net: openvswitch: silence suspicious RCU usage warning
Revert "vxlan: fix tos value before xmit"
ptp: only allow phase values lower than 1 period
farsync: switch from 'pci_' to 'dma_' API
wan: wanxl: switch from 'pci_' to 'dma_' API
hv_netvsc: do not use VF device if link is down
dpaa2-eth: Fix passing zero to 'PTR_ERR' warning
net: macb: Properly handle phylink on at91sam9x
...
core:
- add user def flag to cmd line modes
- dma_fence_wait added might_sleep
- dma-fence lockdep annotations
- indefinite fences are bad documentation
- gem CMA functions used in more drivers
- struct mutex removal
- more drm_ debug macro usage
- set/drop master api fixes
- fix for drm/mm hole size comparison
- drm/mm remove invalid entry optimization
- optimise drm/mm hole handling
- VRR debugfs added
- uncompressed AFBC modifier support
- multiple display id blocks in EDID
- multiple driver sg handling fixes
- __drm_atomic_helper_crtc_reset in all drivers
- managed vram helpers
ttm:
- ttm_mem_reg handling cleanup
- remove bo offset field
- drop CMA memtype flag
- drop mappable flag
xilinx:
- New Xilinx ZynqMP DisplayPort Subsystem driver
nouveau:
- add CRC support
- start using NVIDIA published class header files
- convert all push buffer emission to new macros
- Proper push buffer space management for EVO/NVD channels.
- firmware loading fixes
- 2MiB system memory pages support on Pascal and newer
vkms:
- larget cursor support
i915:
- Rocketlake platform enablement
- Early DG1 enablement
- Numerous GEM refactorings
- DP MST fixes
- FBC, PSR, Cursor, Color, Gamma fixes
- TGL, RKL, EHL workaround updates
- TGL 8K display support fixes
- SDVO/HDMI/DVI fixes
amdgpu:
- Initial support for Sienna Cichlid GPU
- Initial support for Navy Flounder GPU
- SI UVD/VCE support
- expose rotation property
- Add support for unique id on Arcturus
- Enable runtime PM on vega10 boards that support BACO
- Skip BAR resizing if the bios already did id
- Major swSMU code cleanup
- Fixes for DCN bandwidth calculations
amdkfd:
- Track SDMA usage per process
- SMI events interface
radeon:
- Default to on chip GART for AGP boards on all arches
- Runtime PM reference count fixes
msm:
- headers regenerated causing churn
- a650/a640 display and GPU enablement
- dpu dither support for 6bpc panels
- dpu cursor fix
- dsi/mdp5 enablement for sdm630/sdm636/sdm66
tegra:
- video capture prep support
- reflection support
mediatek:
- convert mtk_dsi to bridge API
meson:
- FBC support
sun4i:
- iommu support
rockchip:
- register locking fix
- per-pixel alpha support PX30 VOP
-
mgag200:
- ported to simple and shmem helpers
- device init cleanups
- use managed pci functions
- dropped hw cursor support
ast:
- use managed pci functions
- use managed VRAM helpers
- rework cursor support
malidp:
- dev_groups support
hibmc:
- refactor hibmc_drv_vdac:
vc4:
- create TXP CRTC
imx:
- error path fixes and cleanups
etnaviv:
- clock handling and error handling cleanups
- use pin_user_pages
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJfK1atAAoJEAx081l5xIa+vDkQAJvl/mjbEA7fDy8Ysa0cgPLI
8nI4Bo/MaxkyRfUcP8+f/n3QQrRME37C0xa/Mn6SG1oFAdlovPwDqmDr5kjhkrMI
geo8oJb2Q+AsrJr+ejpuF+iq0FxWi64bLbwJFJ2nBet+lHTMzoPceWeq3gG1Vvfl
h6PV4B/9TjrnbhcKLIQSEmJ0kZp9uMkDBF/iynVn4+AKAkG1rQNjigdTH48IFPoz
28KuqG0B4NWu648zYXhjsN0kD3Dxjv3YOH+FsoWQpQa9icCTySYbySsQ7l0/XvA3
4BPtP3rWMhU46FHTBkWF72WQR4F0B4wm5DJJKMeG4vb1mXakOqAKcAq7JAbka+wL
PBIiU+AcAKRSiwHmYDuDWtDoSpvYncuo0p3IvNP5hhih+7hqCnLIULDWS+V8AUzW
39usS/DXsVKk/HGYIYC89cRwsqWYD4c7edzOBdPQxW4LNYCD2gXezLJ5TeeR2lih
y9JIVnPiluWleOovs4W3BoZNRuLc1rHBO6COToXjlme/48Z+sRHBAoge6UZurqRN
jr+e60cS7n/DOeJQuNf4UHZnK48Pc24+3kVfMHlX+OKn8VuKPGr+USkeHV/NYL/B
USiKCAxkkZM0dxerSb1/Ra9kGnchf0QBpA6Fsem8kV61Z4GVc+K6xJWg7KXB6n/3
7ZyalUKLwlOCz9sYsCCe
=Yvtd
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2020-08-06' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"New xilinx displayport driver, AMD support for two new GPUs (more
header files), i915 initial support for RocketLake and some work on
their DG1 (discrete chip).
The core also grew some lockdep annotations to try and constrain what
drivers do with dma-fences, and added some documentation on why the
idea of indefinite fences doesn't work.
The long list is below.
I do have some fixes trees outstanding, but I'll follow up with those
later.
core:
- add user def flag to cmd line modes
- dma_fence_wait added might_sleep
- dma-fence lockdep annotations
- indefinite fences are bad documentation
- gem CMA functions used in more drivers
- struct mutex removal
- more drm_ debug macro usage
- set/drop master api fixes
- fix for drm/mm hole size comparison
- drm/mm remove invalid entry optimization
- optimise drm/mm hole handling
- VRR debugfs added
- uncompressed AFBC modifier support
- multiple display id blocks in EDID
- multiple driver sg handling fixes
- __drm_atomic_helper_crtc_reset in all drivers
- managed vram helpers
ttm:
- ttm_mem_reg handling cleanup
- remove bo offset field
- drop CMA memtype flag
- drop mappable flag
xilinx:
- New Xilinx ZynqMP DisplayPort Subsystem driver
nouveau:
- add CRC support
- start using NVIDIA published class header files
- convert all push buffer emission to new macros
- Proper push buffer space management for EVO/NVD channels.
- firmware loading fixes
- 2MiB system memory pages support on Pascal and newer
vkms:
- larger cursor support
i915:
- Rocketlake platform enablement
- Early DG1 enablement
- Numerous GEM refactorings
- DP MST fixes
- FBC, PSR, Cursor, Color, Gamma fixes
- TGL, RKL, EHL workaround updates
- TGL 8K display support fixes
- SDVO/HDMI/DVI fixes
amdgpu:
- Initial support for Sienna Cichlid GPU
- Initial support for Navy Flounder GPU
- SI UVD/VCE support
- expose rotation property
- Add support for unique id on Arcturus
- Enable runtime PM on vega10 boards that support BACO
- Skip BAR resizing if the bios already did id
- Major swSMU code cleanup
- Fixes for DCN bandwidth calculations
amdkfd:
- Track SDMA usage per process
- SMI events interface
radeon:
- Default to on chip GART for AGP boards on all arches
- Runtime PM reference count fixes
msm:
- headers regenerated causing churn
- a650/a640 display and GPU enablement
- dpu dither support for 6bpc panels
- dpu cursor fix
- dsi/mdp5 enablement for sdm630/sdm636/sdm66
tegra:
- video capture prep support
- reflection support
mediatek:
- convert mtk_dsi to bridge API
meson:
- FBC support
sun4i:
- iommu support
rockchip:
- register locking fix
- per-pixel alpha support PX30 VOP
mgag200:
- ported to simple and shmem helpers
- device init cleanups
- use managed pci functions
- dropped hw cursor support
ast:
- use managed pci functions
- use managed VRAM helpers
- rework cursor support
malidp:
- dev_groups support
hibmc:
- refactor hibmc_drv_vdac:
vc4:
- create TXP CRTC
imx:
- error path fixes and cleanups
etnaviv:
- clock handling and error handling cleanups
- use pin_user_pages"
* tag 'drm-next-2020-08-06' of git://anongit.freedesktop.org/drm/drm: (1747 commits)
drm/msm: use kthread_create_worker instead of kthread_run
drm/msm/mdp5: Add MDP5 configuration for SDM636/660
drm/msm/dsi: Add DSI configuration for SDM660
drm/msm/mdp5: Add MDP5 configuration for SDM630
drm/msm/dsi: Add phy configuration for SDM630/636/660
drm/msm/a6xx: add A640/A650 hwcg
drm/msm/a6xx: hwcg tables in gpulist
drm/msm/dpu: add SM8250 to hw catalog
drm/msm/dpu: add SM8150 to hw catalog
drm/msm/dpu: intf timing path for displayport
drm/msm/dpu: set missing flush bits for INTF_2 and INTF_3
drm/msm/dpu: don't use INTF_INPUT_CTRL feature on sdm845
drm/msm/dpu: move some sspp caps to dpu_caps
drm/msm/dpu: update UBWC config for sm8150 and sm8250
drm/msm/dpu: use right setup_blend_config for sm8150 and sm8250
drm/msm/a6xx: set ubwc config for A640 and A650
drm/msm/adreno: un-open-code some packets
drm/msm: sync generated headers
drm/msm/a6xx: add build_bw_table for A640/A650
drm/msm/a6xx: fix crashstate capture for A650
...
vDPA devices has dedicated backed hardware like
passthrough-ed devices. Then it is possible to setup irq
offloading to vCPU for vDPA devices. Thus this patch tries to
manipulated assigned device counters by
kvm_arch_start/end_assignment() in irqbypass manager, so that
assigned devices could be detected in update_pi_irte()
We will increase/decrease the assigned device counter in kvm/x86.
Both vDPA and VFIO would go through this code path.
Only X86 uses these counters and kvm_arch_start/end_assignment(),
so this code path only affect x86 for now.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Suggested-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20200731065533.4144-3-lingshan.zhu@intel.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
while to come. Changes include:
- Some new Chinese translations
- Progress on the battle against double words words and non-HTTPS URLs
- Some block-mq documentation
- More RST conversions from Mauro. At this point, that task is
essentially complete, so we shouldn't see this kind of churn again for a
while. Unless we decide to switch to asciidoc or something...:)
- Lots of typo fixes, warning fixes, and more.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl8oVkwPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YoW8H/jJ/xnXFn7tkgVPQAlL3k5HCnK7A5nDP9RVR
cg1pTx1cEFdjzxPlJyExU6/v+AImOvtweHXC+JDK7YcJ6XFUNYXJI3LxL5KwUXbY
BL/xRFszDSXH2C7SJF5GECcFYp01e/FWSLN3yWAh+g+XwsKiTJ8q9+CoIDkHfPGO
7oQsHKFu6s36Af0LfSgxk4sVB7EJbo8e4psuPsP5SUrl+oXRO43Put0rXkR4yJoH
9oOaB51Do5fZp8I4JVAqGXvpXoExyLMO4yw0mASm6YSZ3KyjR8Fae+HD9Cq4ZuwY
0uzb9K+9NEhqbfwtyBsi99S64/6Zo/MonwKwevZuhtsDTK4l4iU=
=JQLZ
-----END PGP SIGNATURE-----
Merge tag 'docs-5.9' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"It's been a busy cycle for documentation - hopefully the busiest for a
while to come. Changes include:
- Some new Chinese translations
- Progress on the battle against double words words and non-HTTPS
URLs
- Some block-mq documentation
- More RST conversions from Mauro. At this point, that task is
essentially complete, so we shouldn't see this kind of churn again
for a while. Unless we decide to switch to asciidoc or
something...:)
- Lots of typo fixes, warning fixes, and more"
* tag 'docs-5.9' of git://git.lwn.net/linux: (195 commits)
scripts/kernel-doc: optionally treat warnings as errors
docs: ia64: correct typo
mailmap: add entry for <alobakin@marvell.com>
doc/zh_CN: add cpu-load Chinese version
Documentation/admin-guide: tainted-kernels: fix spelling mistake
MAINTAINERS: adjust kprobes.rst entry to new location
devices.txt: document rfkill allocation
PCI: correct flag name
docs: filesystems: vfs: correct flag name
docs: filesystems: vfs: correct sync_mode flag names
docs: path-lookup: markup fixes for emphasis
docs: path-lookup: more markup fixes
docs: path-lookup: fix HTML entity mojibake
CREDITS: Replace HTTP links with HTTPS ones
docs: process: Add an example for creating a fixes tag
doc/zh_CN: add Chinese translation prefer section
doc/zh_CN: add clearing-warn-once Chinese version
doc/zh_CN: add admin-guide index
doc:it_IT: process: coding-style.rst: Correct __maybe_unused compiler label
futex: MAINTAINERS: Re-add selftests directory
...
this has been brought into a shape which is maintainable and actually
works.
This final version was done by Sasha Levin who took it up after Intel
dropped the ball. Sasha discovered that the SGX (sic!) offerings out there
ship rogue kernel modules enabling FSGSBASE behind the kernels back which
opens an instantanious unpriviledged root hole.
The FSGSBASE instructions provide a considerable speedup of the context
switch path and enable user space to write GSBASE without kernel
interaction. This enablement requires careful handling of the exception
entries which go through the paranoid entry path as they cannot longer rely
on the assumption that user GSBASE is positive (as enforced via prctl() on
non FSGSBASE enabled systemn). All other entries (syscalls, interrupts and
exceptions) can still just utilize SWAPGS unconditionally when the entry
comes from user space. Converting these entries to use FSGSBASE has no
benefit as SWAPGS is only marginally slower than WRGSBASE and locating and
retrieving the kernel GSBASE value is not a free operation either. The real
benefit of RD/WRGSBASE is the avoidance of the MSR reads and writes.
The changes come with appropriate selftests and have held up in field
testing against the (sanitized) Graphene-SGX driver.
-----BEGIN PGP SIGNATURE-----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=QaAN
-----END PGP SIGNATURE-----
Merge tag 'x86-fsgsbase-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fsgsbase from Thomas Gleixner:
"Support for FSGSBASE. Almost 5 years after the first RFC to support
it, this has been brought into a shape which is maintainable and
actually works.
This final version was done by Sasha Levin who took it up after Intel
dropped the ball. Sasha discovered that the SGX (sic!) offerings out
there ship rogue kernel modules enabling FSGSBASE behind the kernels
back which opens an instantanious unpriviledged root hole.
The FSGSBASE instructions provide a considerable speedup of the
context switch path and enable user space to write GSBASE without
kernel interaction. This enablement requires careful handling of the
exception entries which go through the paranoid entry path as they
can no longer rely on the assumption that user GSBASE is positive (as
enforced via prctl() on non FSGSBASE enabled systemn).
All other entries (syscalls, interrupts and exceptions) can still just
utilize SWAPGS unconditionally when the entry comes from user space.
Converting these entries to use FSGSBASE has no benefit as SWAPGS is
only marginally slower than WRGSBASE and locating and retrieving the
kernel GSBASE value is not a free operation either. The real benefit
of RD/WRGSBASE is the avoidance of the MSR reads and writes.
The changes come with appropriate selftests and have held up in field
testing against the (sanitized) Graphene-SGX driver"
* tag 'x86-fsgsbase-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
x86/fsgsbase: Fix Xen PV support
x86/ptrace: Fix 32-bit PTRACE_SETREGS vs fsbase and gsbase
selftests/x86/fsgsbase: Add a missing memory constraint
selftests/x86/fsgsbase: Fix a comment in the ptrace_write_gsbase test
selftests/x86: Add a syscall_arg_fault_64 test for negative GSBASE
selftests/x86/fsgsbase: Test ptracer-induced GS base write with FSGSBASE
selftests/x86/fsgsbase: Test GS selector on ptracer-induced GS base write
Documentation/x86/64: Add documentation for GS/FS addressing mode
x86/elf: Enumerate kernel FSGSBASE capability in AT_HWCAP2
x86/cpu: Enable FSGSBASE on 64bit by default and add a chicken bit
x86/entry/64: Handle FSGSBASE enabled paranoid entry/exit
x86/entry/64: Introduce the FIND_PERCPU_BASE macro
x86/entry/64: Switch CR3 before SWAPGS in paranoid entry
x86/speculation/swapgs: Check FSGSBASE in enabling SWAPGS mitigation
x86/process/64: Use FSGSBASE instructions on thread copy and ptrace
x86/process/64: Use FSBSBASE in switch_to() if available
x86/process/64: Make save_fsgs_for_kvm() ready for FSGSBASE
x86/fsgsbase/64: Enable FSGSBASE instructions in helper functions
x86/fsgsbase/64: Add intrinsics for FSGSBASE instructions
x86/cpu: Add 'unsafe_fsgsbase' to enable CR4.FSGSBASE
...
to the generic code. Pretty much a straight forward 1:1 conversion plus the
consolidation of the KVM handling of pending work before entering guest
mode.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl8pEFgTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYocEwD/474Eb7LzZ8yahyUBirWJP3k3qzgs9j
dZUxqB6LNuDOstEyTGLPdx1dmQP2vHbFfjoM7YBOH37EGcHsqjGliLvn2Y05ZD7O
6kYwjz6qVnJcm3IMtfSUn/8LkfO5pGUdKd3U5ngDmPLpkeaQ4nPKqiO0uIb0wzwa
cO7l10tG4YjMCWQxPNIaOh8kncLieQBediJPFjkQjV+Fh33kSU3LWTl3fccz6b5+
mgSUFL0qjQpp+Nl7lCaDQQiAop9GTUETfDtximRydZauiM2NpCfz+QBmQzq50Xv1
G3DWZoBIZBjmWJUgfSmS/s4GOYkBTBnT/fUcZmIDcgdRwvtEvRzIhcP87/wn7P3N
UKpLdHqmvA0BFDXZbNZgS362++29pj5Lnb+u3QbWSKQ9UqHN0NUlSY4wzfTLXsGp
Mzpp4TW0u/8kyOlo7wK3lVDgNJaPG31aiNVuDPgLe4cEluO5cq7/7g2GcFBqF1Ly
SqNGD1IccteNQTNvDopczPy7qUl5Lal+Ia06szNSPR48gLrvhSWdyYr2i1sD7vx4
hAhR0Hsi9dacGv46TrRw1OdDzq9bOW68G8GIgLJgDXaayPXLnx6TQEUjzQtIkE/i
ydTPUarp5QOFByt+RBjI90ZcW4RuLgMTOEVONPXtSn8IoCP2Kdg9u3gD9AmUW3Q2
JFkKMiSiJPGxlw==
=84y7
-----END PGP SIGNATURE-----
Merge tag 'x86-entry-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 conversion to generic entry code from Thomas Gleixner:
"The conversion of X86 syscall, interrupt and exception entry/exit
handling to the generic code.
Pretty much a straight-forward 1:1 conversion plus the consolidation
of the KVM handling of pending work before entering guest mode"
* tag 'x86-entry-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kvm: Use __xfer_to_guest_mode_work_pending() in kvm_run_vcpu()
x86/kvm: Use generic xfer to guest work function
x86/entry: Cleanup idtentry_enter/exit
x86/entry: Use generic interrupt entry/exit code
x86/entry: Cleanup idtentry_entry/exit_user
x86/entry: Use generic syscall exit functionality
x86/entry: Use generic syscall entry function
x86/ptrace: Provide pt_regs helper for entry/exit
x86/entry: Move user return notifier out of loop
x86/entry: Consolidate 32/64 bit syscall entry
x86/entry: Consolidate check_user_regs()
x86: Correct noinstr qualifiers
x86/idtentry: Remove stale comment
- make support for dma_ops optional
- move more code out of line
- add generic support for a dma_ops bypass mode
- misc cleanups
-----BEGIN PGP SIGNATURE-----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=90UK
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.9' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- make support for dma_ops optional
- move more code out of line
- add generic support for a dma_ops bypass mode
- misc cleanups
* tag 'dma-mapping-5.9' of git://git.infradead.org/users/hch/dma-mapping:
dma-contiguous: cleanup dma_alloc_contiguous
dma-debug: use named initializers for dir2name
powerpc: use the generic dma_ops_bypass mode
dma-mapping: add a dma_ops_bypass flag to struct device
dma-mapping: make support for dma ops optional
dma-mapping: inline the fast path dma-direct calls
dma-mapping: move the remaining DMA API calls out of line
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXygcpgAKCRCRxhvAZXjc
ogPeAQDv1ncqtNroFAC4pJ4tQhH7JSjW0OltiMk/AocY/J2SdQD9GJ15luYJ0/om
697q/Z68sndRynhdoZlMuf3oYuBlHQw=
=3ZhE
-----END PGP SIGNATURE-----
Merge tag 'close-range-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull close_range() implementation from Christian Brauner:
"This adds the close_range() syscall. It allows to efficiently close a
range of file descriptors up to all file descriptors of a calling
task.
This is coordinated with the FreeBSD folks which have copied our
version of this syscall and in the meantime have already merged it in
April 2019:
https://reviews.freebsd.org/D21627https://svnweb.freebsd.org/base?view=revision&revision=359836
The syscall originally came up in a discussion around the new mount
API and making new file descriptor types cloexec by default. During
this discussion, Al suggested the close_range() syscall.
First, it helps to close all file descriptors of an exec()ing task.
This can be done safely via (quoting Al's example from [1] verbatim):
/* that exec is sensitive */
unshare(CLONE_FILES);
/* we don't want anything past stderr here */
close_range(3, ~0U);
execve(....);
The code snippet above is one way of working around the problem that
file descriptors are not cloexec by default. This is aggravated by the
fact that we can't just switch them over without massively regressing
userspace. For a whole class of programs having an in-kernel method of
closing all file descriptors is very helpful (e.g. demons, service
managers, programming language standard libraries, container managers
etc.).
Second, it allows userspace to avoid implementing closing all file
descriptors by parsing through /proc/<pid>/fd/* and calling close() on
each file descriptor and other hacks. From looking at various
large(ish) userspace code bases this or similar patterns are very
common in service managers, container runtimes, and programming
language runtimes/standard libraries such as Python or Rust.
In addition, the syscall will also work for tasks that do not have
procfs mounted and on kernels that do not have procfs support compiled
in. In such situations the only way to make sure that all file
descriptors are closed is to call close() on each file descriptor up
to UINT_MAX or RLIMIT_NOFILE, OPEN_MAX trickery.
Based on Linus' suggestion close_range() also comes with a new flag
CLOSE_RANGE_UNSHARE to more elegantly handle file descriptor dropping
right before exec. This would usually be expressed in the sequence:
unshare(CLONE_FILES);
close_range(3, ~0U);
as pointed out by Linus it might be desirable to have this be a part
of close_range() itself under a new flag CLOSE_RANGE_UNSHARE which
gets especially handy when we're closing all file descriptors above a
certain threshold.
Test-suite as always included"
* tag 'close-range-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
tests: add CLOSE_RANGE_UNSHARE tests
close_range: add CLOSE_RANGE_UNSHARE
tests: add close_range() tests
arch: wire-up close_range()
open: add close_range()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXyge/QAKCRCRxhvAZXjc
oildAQCCWpnTeXm6hrIE3VZ36X5npFtbaEthdBVAUJM7mo0FYwEA8+Wbnubg6jCw
mztkXCnTfU7tApUdhKtQzcpEws45/Qk=
=REE/
-----END PGP SIGNATURE-----
Merge tag 'fork-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull fork cleanups from Christian Brauner:
"This is cleanup series from when we reworked a chunk of the process
creation paths in the kernel and switched to struct
{kernel_}clone_args.
High-level this does two main things:
- Remove the double export of both do_fork() and _do_fork() where
do_fork() used the incosistent legacy clone calling convention.
Now we only export _do_fork() which is based on struct
kernel_clone_args.
- Remove the copy_thread_tls()/copy_thread() split making the
architecture specific HAVE_COYP_THREAD_TLS config option obsolete.
This switches all remaining architectures to select
HAVE_COPY_THREAD_TLS and thus to the copy_thread_tls() calling
convention. The current split makes the process creation codepaths
more convoluted than they need to be. Each architecture has their own
copy_thread() function unless it selects HAVE_COPY_THREAD_TLS then it
has a copy_thread_tls() function.
The split is not needed anymore nowadays, all architectures support
CLONE_SETTLS but quite a few of them never bothered to select
HAVE_COPY_THREAD_TLS and instead simply continued to use copy_thread()
and use the old calling convention. Removing this split cleans up the
process creation codepaths and paves the way for implementing clone3()
on such architectures since it requires the copy_thread_tls() calling
convention.
After having made each architectures support copy_thread_tls() this
series simply renames that function back to copy_thread(). It also
switches all architectures that call do_fork() directly over to
_do_fork() and the struct kernel_clone_args calling convention. This
is a corollary of switching the architectures that did not yet support
it over to copy_thread_tls() since do_fork() is conditional on not
supporting copy_thread_tls() (Mostly because it lacks a separate
argument for tls which is trivial to fix but there's no need for this
function to exist.).
The do_fork() removal is in itself already useful as it allows to to
remove the export of both do_fork() and _do_fork() we currently have
in favor of only _do_fork(). This has already been discussed back when
we added clone3(). The legacy clone() calling convention is - as is
probably well-known - somewhat odd:
#
# ABI hall of shame
#
config CLONE_BACKWARDS
config CLONE_BACKWARDS2
config CLONE_BACKWARDS3
that is aggravated by the fact that some architectures such as sparc
follow the CLONE_BACKWARDSx calling convention but don't really select
the corresponding config option since they call do_fork() directly.
So do_fork() enforces a somewhat arbitrary calling convention in the
first place that doesn't really help the individual architectures that
deviate from it. They can thus simply be switched to _do_fork()
enforcing a single calling convention. (I really hope that any new
architectures will __not__ try to implement their own calling
conventions...)
Most architectures already have made a similar switch (m68k comes to
mind).
Overall this removes more code than it adds even with a good portion
of added comments. It simplifies a chunk of arch specific assembly
either by moving the code into C or by simply rewriting the assembly.
Architectures that have been touched in non-trivial ways have all been
actually boot and stress tested: sparc and ia64 have been tested with
Debian 9 images. They are the two architectures which have been
touched the most. All non-trivial changes to architectures have seen
acks from the relevant maintainers. nios2 with a custom built
buildroot image. h8300 I couldn't get something bootable to test on
but the changes have been fairly automatic and I'm sure we'll hear
people yell if I broke something there.
All other architectures that have been touched in trivial ways have
been compile tested for each single patch of the series via git rebase
-x "make ..." v5.8-rc2. arm{64} and x86{_64} have been boot tested
even though they have just been trivially touched (removal of the
HAVE_COPY_THREAD_TLS macro from their Kconfig) because well they are
basically "core architectures" and since it is trivial to get your
hands on a useable image"
* tag 'fork-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
arch: rename copy_thread_tls() back to copy_thread()
arch: remove HAVE_COPY_THREAD_TLS
unicore: switch to copy_thread_tls()
sh: switch to copy_thread_tls()
nds32: switch to copy_thread_tls()
microblaze: switch to copy_thread_tls()
hexagon: switch to copy_thread_tls()
c6x: switch to copy_thread_tls()
alpha: switch to copy_thread_tls()
fork: remove do_fork()
h8300: select HAVE_COPY_THREAD_TLS, switch to kernel_clone_args
nios2: enable HAVE_COPY_THREAD_TLS, switch to kernel_clone_args
ia64: enable HAVE_COPY_THREAD_TLS, switch to kernel_clone_args
sparc: unconditionally enable HAVE_COPY_THREAD_TLS
sparc: share process creation helpers between sparc and sparc64
sparc64: enable HAVE_COPY_THREAD_TLS
fork: fold legacy_clone_args_valid() into _do_fork()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXygcLwAKCRCRxhvAZXjc
ohajAP4n5E3BmN0jpIviXT4eNhP62jzxJtxlVXtgGT3D8b1mpQEA5n8NSOlQLoAh
yUGsjtwR9xDcHMcrhXD3yN6eYJSK0A8=
=tn4R
-----END PGP SIGNATURE-----
Merge tag 'threads-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull thread updates from Christian Brauner:
"This contains the changes to add the missing support for attaching to
time namespaces via pidfds.
Last cycle setns() was changed to support attaching to multiple
namespaces atomically. This requires all namespaces to have a point of
no return where they can't fail anymore.
Specifically, <namespace-type>_install() is allowed to perform
permission checks and install the namespace into the new struct nsset
that it has been given but it is not allowed to make visible changes
to the affected task. Once <namespace-type>_install() returns,
anything that the given namespace type additionally requires to be
setup needs to ideally be done in a function that can't fail or if it
fails the failure must be non-fatal.
For time namespaces the relevant functions that fell into this
category were timens_set_vvar_page() and vdso_join_timens(). The
latter could still fail although it didn't need to. This function is
only implemented for vdso_join_timens() in current mainline. As
discussed on-list (cf. [1]), in order to make setns() support time
namespaces when attaching to multiple namespaces at once properly we
changed vdso_join_timens() to always succeed. So vdso_join_timens()
replaces the mmap_write_lock_killable() with mmap_read_lock().
Please note that arm is about to grow vdso support for time namespaces
(possibly this merge window). We've synced on this change and arm64
also uses mmap_read_lock(), i.e. makes vdso_join_timens() a function
that can't fail. Once the changes here and the arm64 changes have
landed, vdso_join_timens() should be turned into a void function so
it's obvious to callers and implementers on other architectures that
the expectation is that it can't fail.
We didn't do this right away because it would've introduced
unnecessary merge conflicts between the two trees for no major gain.
As always, tests included"
[1]: https://lore.kernel.org/lkml/20200611110221.pgd3r5qkjrjmfqa2@wittgenstein
* tag 'threads-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
tests: add CLONE_NEWTIME setns tests
nsproxy: support CLONE_NEWTIME with setns()
timens: add timens_commit() helper
timens: make vdso_join_timens() always succeed
Pull execve updates from Eric Biederman:
"During the development of v5.7 I ran into bugs and quality of
implementation issues related to exec that could not be easily fixed
because of the way exec is implemented. So I have been diggin into
exec and cleaning up what I can.
This cycle I have been looking at different ideas and different
implementations to see what is possible to improve exec, and cleaning
the way exec interfaces with in kernel users. Only cleaning up the
interfaces of exec with rest of the kernel has managed to stabalize
and make it through review in time for v5.9-rc1 resulting in 2 sets of
changes this cycle.
- Implement kernel_execve
- Make the user mode driver code a better citizen
With kernel_execve the code size got a little larger as the copying of
parameters from userspace and copying of parameters from userspace is
now separate. The good news is kernel threads no longer need to play
games with set_fs to use exec. Which when combined with the rest of
Christophs set_fs changes should security bugs with set_fs much more
difficult"
* 'exec-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (23 commits)
exec: Implement kernel_execve
exec: Factor bprm_stack_limits out of prepare_arg_pages
exec: Factor bprm_execve out of do_execve_common
exec: Move bprm_mm_init into alloc_bprm
exec: Move initialization of bprm->filename into alloc_bprm
exec: Factor out alloc_bprm
exec: Remove unnecessary spaces from binfmts.h
umd: Stop using split_argv
umd: Remove exit_umh
bpfilter: Take advantage of the facilities of struct pid
exit: Factor thread_group_exited out of pidfd_poll
umd: Track user space drivers with struct pid
bpfilter: Move bpfilter_umh back into init data
exec: Remove do_execve_file
umh: Stop calling do_execve_file
umd: Transform fork_usermode_blob into fork_usermode_driver
umd: Rename umd_info.cmdline umd_info.driver_name
umd: For clarity rename umh_info umd_info
umh: Separate the user mode driver and the user mode helper support
umh: Remove call_usermodehelper_setup_file.
...
- Make the Energy Model cover non-CPU devices (Lukasz Luba).
- Add Ice Lake server idle states table to the intel_idle driver
and eliminate a redundant static variable from it (Chen Yu,
Rafael Wysocki).
- Eliminate all W=1 build warnings from cpufreq (Lee Jones).
- Add support for Sapphire Rapids and for Power Limit 4 to the
Intel RAPL power capping driver (Sumeet Pawnikar, Zhang Rui).
- Fix function name in kerneldoc comments in the idle_inject power
capping driver (Yangtao Li).
- Fix locking issues with cpufreq governors and drop a redundant
"weak" function definition from cpufreq (Viresh Kumar).
- Rearrange cpufreq to register non-modular governors at the
core_initcall level and allow the default cpufreq governor to
be specified in the kernel command line (Quentin Perret).
- Extend, fix and clean up the intel_pstate driver (Srinivas
Pandruvada, Rafael Wysocki):
* Add a new sysfs attribute for disabling/enabling CPU
energy-efficiency optimizations in the processor.
* Make the driver avoid enabling HWP if EPP is not supported.
* Allow the driver to handle numeric EPP values in the sysfs
interface and fix the setting of EPP via sysfs in the active
mode.
* Eliminate a static checker warning and clean up a kerneldoc
comment.
- Clean up some variable declarations in the powernv cpufreq
driver (Wei Yongjun).
- Fix up the ->enter_s2idle callback definition to cover the case
when it points to the same function as ->idle correctly (Neal
Liu).
- Rearrange and clean up the PSCI cpuidle driver (Ulf Hansson).
- Make the PM core emit "changed" uevent when adding/removing the
"wakeup" sysfs attribute of devices (Abhishek Pandit-Subedi).
- Add a helper macro for declaring PM callbacks and use it in the
MMC jz4740 driver (Paul Cercueil).
- Fix white space in some places in the hibernate code and make the
system-wide PM code use "const char *" where appropriate (Xiang
Chen, Alexey Dobriyan).
- Add one more "unsafe" helper macro to the freezer to cover the NFS
use case (He Zhe).
- Change the language in the generic PM domains framework to use
parent/child terminology and clean up a typo and some comment
fromatting in that code (Kees Cook, Geert Uytterhoeven).
- Update the operating performance points OPP framework (Lukasz
Luba, Andrew-sh.Cheng, Valdis Kletnieks):
* Refactor dev_pm_opp_of_register_em() and update related drivers.
* Add a missing function export.
* Allow disabled OPPs in dev_pm_opp_get_freq().
- Update devfreq core and drivers (Chanwoo Choi, Lukasz Luba, Enric
Balletbo i Serra, Dmitry Osipenko, Kieran Bingham, Marc Zyngier):
* Add support for delayed timers to the devfreq core and make the
Samsung exynos5422-dmc driver use it.
* Unify sysfs interface to use "df-" as a prefix in instance names
consistently.
* Fix devfreq_summary debugfs node indentation.
* Add the rockchip,pmu phandle to the rk3399_dmc driver DT
bindings.
* List Dmitry Osipenko as the Tegra devfreq driver maintainer.
* Fix typos in the core devfreq code.
- Update the pm-graph utility to version 5.7 including a number of
fixes related to suspend-to-idle (Todd Brandt).
- Fix coccicheck errors and warnings in the cpupower utility (Shuah
Khan).
- Replace HTTP links with HTTPs ones in multiple places (Alexander
A. Klimov).
-----BEGIN PGP SIGNATURE-----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=8cUO
-----END PGP SIGNATURE-----
Merge tag 'pm-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"The most significant change here is the extension of the Energy Model
to cover non-CPU devices (as well as CPUs) from Lukasz Luba.
There is also some new hardware support (Ice Lake server idle states
table for intel_idle, Sapphire Rapids and Power Limit 4 support in the
RAPL driver), some new functionality in the existing drivers (eg. a
new switch to disable/enable CPU energy-efficiency optimizations in
intel_pstate, delayed timers in devfreq), some assorted fixes (cpufreq
core, intel_pstate, intel_idle) and cleanups (eg. cpuidle-psci,
devfreq), including the elimination of W=1 build warnings from cpufreq
done by Lee Jones.
Specifics:
- Make the Energy Model cover non-CPU devices (Lukasz Luba).
- Add Ice Lake server idle states table to the intel_idle driver and
eliminate a redundant static variable from it (Chen Yu, Rafael
Wysocki).
- Eliminate all W=1 build warnings from cpufreq (Lee Jones).
- Add support for Sapphire Rapids and for Power Limit 4 to the Intel
RAPL power capping driver (Sumeet Pawnikar, Zhang Rui).
- Fix function name in kerneldoc comments in the idle_inject power
capping driver (Yangtao Li).
- Fix locking issues with cpufreq governors and drop a redundant
"weak" function definition from cpufreq (Viresh Kumar).
- Rearrange cpufreq to register non-modular governors at the
core_initcall level and allow the default cpufreq governor to be
specified in the kernel command line (Quentin Perret).
- Extend, fix and clean up the intel_pstate driver (Srinivas
Pandruvada, Rafael Wysocki):
* Add a new sysfs attribute for disabling/enabling CPU
energy-efficiency optimizations in the processor.
* Make the driver avoid enabling HWP if EPP is not supported.
* Allow the driver to handle numeric EPP values in the sysfs
interface and fix the setting of EPP via sysfs in the active
mode.
* Eliminate a static checker warning and clean up a kerneldoc
comment.
- Clean up some variable declarations in the powernv cpufreq driver
(Wei Yongjun).
- Fix up the ->enter_s2idle callback definition to cover the case
when it points to the same function as ->idle correctly (Neal Liu).
- Rearrange and clean up the PSCI cpuidle driver (Ulf Hansson).
- Make the PM core emit "changed" uevent when adding/removing the
"wakeup" sysfs attribute of devices (Abhishek Pandit-Subedi).
- Add a helper macro for declaring PM callbacks and use it in the MMC
jz4740 driver (Paul Cercueil).
- Fix white space in some places in the hibernate code and make the
system-wide PM code use "const char *" where appropriate (Xiang
Chen, Alexey Dobriyan).
- Add one more "unsafe" helper macro to the freezer to cover the NFS
use case (He Zhe).
- Change the language in the generic PM domains framework to use
parent/child terminology and clean up a typo and some comment
fromatting in that code (Kees Cook, Geert Uytterhoeven).
- Update the operating performance points OPP framework (Lukasz Luba,
Andrew-sh.Cheng, Valdis Kletnieks):
* Refactor dev_pm_opp_of_register_em() and update related drivers.
* Add a missing function export.
* Allow disabled OPPs in dev_pm_opp_get_freq().
- Update devfreq core and drivers (Chanwoo Choi, Lukasz Luba, Enric
Balletbo i Serra, Dmitry Osipenko, Kieran Bingham, Marc Zyngier):
* Add support for delayed timers to the devfreq core and make the
Samsung exynos5422-dmc driver use it.
* Unify sysfs interface to use "df-" as a prefix in instance
names consistently.
* Fix devfreq_summary debugfs node indentation.
* Add the rockchip,pmu phandle to the rk3399_dmc driver DT
bindings.
* List Dmitry Osipenko as the Tegra devfreq driver maintainer.
* Fix typos in the core devfreq code.
- Update the pm-graph utility to version 5.7 including a number of
fixes related to suspend-to-idle (Todd Brandt).
- Fix coccicheck errors and warnings in the cpupower utility (Shuah
Khan).
- Replace HTTP links with HTTPs ones in multiple places (Alexander A.
Klimov)"
* tag 'pm-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (71 commits)
cpuidle: ACPI: fix 'return' with no value build warning
cpufreq: intel_pstate: Fix EPP setting via sysfs in active mode
cpufreq: intel_pstate: Rearrange the storing of new EPP values
intel_idle: Customize IceLake server support
PM / devfreq: Fix the wrong end with semicolon
PM / devfreq: Fix indentaion of devfreq_summary debugfs node
PM / devfreq: Clean up the devfreq instance name in sysfs attr
memory: samsung: exynos5422-dmc: Add module param to control IRQ mode
memory: samsung: exynos5422-dmc: Adjust polling interval and uptreshold
memory: samsung: exynos5422-dmc: Use delayed timer as default
PM / devfreq: Add support delayed timer for polling mode
dt-bindings: devfreq: rk3399_dmc: Add rockchip,pmu phandle
PM / devfreq: tegra: Add Dmitry as a maintainer
PM / devfreq: event: Fix trivial spelling
PM / devfreq: rk3399_dmc: Fix kernel oops when rockchip,pmu is absent
cpuidle: change enter_s2idle() prototype
cpuidle: psci: Prevent domain idlestates until consumers are ready
cpuidle: psci: Convert PM domain to platform driver
cpuidle: psci: Fix error path via converting to a platform driver
cpuidle: psci: Fail cpuidle registration if set OSI mode failed
...
- Print the PPIN field on CPUs that fill them out
- Fix an MCE injection bug
- Simplify a kzalloc in dev_mcelog_init_device()
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=z0MD
-----END PGP SIGNATURE-----
Merge tag 'ras-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 RAS updates from Ingo Molnar:
"Boris is on vacation and he asked us to send you the pending RAS bits:
- Print the PPIN field on CPUs that fill them out
- Fix an MCE injection bug
- Simplify a kzalloc in dev_mcelog_init_device()"
* tag 'ras-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce, EDAC/mce_amd: Print PPIN in machine check records
x86/mce/dev-mcelog: Use struct_size() helper in kzalloc()
x86/mce/inject: Fix a wrong assignment of i_mce.status
to avoid recalibration.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=S8sw
-----END PGP SIGNATURE-----
Merge tag 'x86-timers-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 timer update from Ingo Molnar:
"Set the X86_FEATURE_TSC_KNOWN_FREQ flag for Xen guests, to avoid
recalibration"
* tag 'x86-timers-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/xen/time: Set the X86_FEATURE_TSC_KNOWN_FREQ flag in xen_tsc_khz()
removal of the legacy EFI old_mmap code as well.
This removes quite a bunch of old code & quirks.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=NChe
-----END PGP SIGNATURE-----
Merge tag 'x86-platform-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 platform updates from Ingo Molnar:
"The biggest change is the removal of SGI UV1 support, which allowed
the removal of the legacy EFI old_mmap code as well.
This removes quite a bunch of old code & quirks"
* tag 'x86-platform-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/efi: Remove unused EFI_UV1_MEMMAP code
x86/platform/uv: Remove uv bios and efi code related to EFI_UV1_MEMMAP
x86/efi: Remove references to no-longer-used efi_have_uv1_memmap()
x86/efi: Delete SGI UV1 detection.
x86/platform/uv: Remove efi=old_map command line option
x86/platform/uv: Remove vestigial mention of UV1 platform from bios header
x86/platform/uv: Remove support for UV1 platform from uv
x86/platform/uv: Remove support for uv1 platform from uv_hub
x86/platform/uv: Remove support for UV1 platform from uv_bau
x86/platform/uv: Remove support for UV1 platform from uv_mmrs
x86/platform/uv: Remove support for UV1 platform from x2apic_uv_x
x86/platform/uv: Remove support for UV1 platform from uv_tlb
x86/platform/uv: Remove support for UV1 platform from uv_time
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=D9UW
-----END PGP SIGNATURE-----
Merge tag 'x86-mm-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mmm update from Ingo Molnar:
"The biggest change is to not sync the vmalloc and ioremap ranges for
x86-64 anymore"
* tag 'x86-mm-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm/64: Make sync_global_pgds() static
x86/mm/64: Do not sync vmalloc/ioremap mappings
x86/mm: Pre-allocate P4D/PUD pages for vmalloc area
they happen outside the allowed set of MSRs, which is a single one for now,
MSR_IA32_ENERGY_PERF_BIAS.
The plan is to eventually disable MSR writes by default (they can still be
enabled via allow_writes=on).
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=X+M1
-----END PGP SIGNATURE-----
Merge tag 'x86-misc-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 MSR filtering from Ingo Molnar:
"Filter MSR writes from user-space by default, and print a syslog entry
if they happen outside the allowed set of MSRs, which is a single one
for now, MSR_IA32_ENERGY_PERF_BIAS.
The plan is to eventually disable MSR writes by default (they can
still be enabled via allow_writes=on)"
* tag 'x86-misc-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/msr: Filter MSR writes
- Prepare for Intel's new SERIALIZE instruction
- Enable split-lock debugging on more CPUs
- Add more Intel CPU models
- Optimize stack canary initialization a bit
- Simplify the Spectre logic a bit
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=sL2Q
-----END PGP SIGNATURE-----
Merge tag 'x86-cpu-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu updates from Ingo Molar:
- prepare for Intel's new SERIALIZE instruction
- enable split-lock debugging on more CPUs
- add more Intel CPU models
- optimize stack canary initialization a bit
- simplify the Spectre logic a bit
* tag 'x86-cpu-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Refactor sync_core() for readability
x86/cpu: Relocate sync_core() to sync_core.h
x86/cpufeatures: Add enumeration for SERIALIZE instruction
x86/split_lock: Enable the split lock feature on Sapphire Rapids and Alder Lake CPUs
x86/cpu: Add Lakefield, Alder Lake and Rocket Lake models to the to Intel CPU family
x86/stackprotector: Pre-initialize canary for secondary CPUs
x86/speculation: Merge one test in spectre_v2_user_select_mitigation()
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=zyiS
-----END PGP SIGNATURE-----
Merge tag 'x86-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 debug fixlets from Ingo Molnar:
"Improve x86 debuggability: print registers with the same log level as
the backtrace"
* tag 'x86-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/dumpstack: Show registers dump with trace's log level
x86/dumpstack: Add log_lvl to __show_regs()
x86/dumpstack: Add log_lvl to show_iret_regs()
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=X7o0
-----END PGP SIGNATURE-----
Merge tag 'x86-cleanups-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Ingo Molnar:
"Misc cleanups all around the place"
* tag 'x86-cleanups-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ioperm: Initialize pointer bitmap with NULL rather than 0
x86: uv: uv_hub.h: Delete duplicated word
x86: cmpxchg_32.h: Delete duplicated word
x86: bootparam.h: Delete duplicated word
x86/mm: Remove the unused mk_kernel_pgd() #define
x86/tsc: Remove unused "US_SCALE" and "NS_SCALE" leftover macros
x86/ioapic: Remove unused "IOAPIC_AUTO" define
x86/mm: Drop unused MAX_PHYSADDR_BITS
x86/msr: Move the F15h MSRs where they belong
x86/idt: Make idt_descr static
initrd: Remove erroneous comment
x86/mm/32: Fix -Wmissing prototypes warnings for init.c
cpu/speculation: Add prototype for cpu_show_srbds()
x86/mm: Fix -Wmissing-prototypes warnings for arch/x86/mm/init.c
x86/asm: Unify __ASSEMBLY__ blocks
x86/cpufeatures: Mark two free bits in word 3
x86/msr: Lift AMD family 0x15 power-specific MSRs
kernel and initrd images.
ZSTD has a very fast decompressor, yet it compresses better than gzip.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=bARW
-----END PGP SIGNATURE-----
Merge tag 'x86-boot-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot updates from Ingo Molnar:
"The main change in this cycle was to add support for ZSTD-compressed
kernel and initrd images.
ZSTD has a very fast decompressor, yet it compresses better than gzip"
* tag 'x86-boot-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation: dontdiff: Add zstd compressed files
.gitignore: Add ZSTD-compressed files
x86: Add support for ZSTD compressed kernel
x86: Bump ZO_z_extra_bytes margin for zstd
usr: Add support for zstd compressed initramfs
init: Add support for zstd compressed kernel
lib: Add zstd support to decompress
lib: Prepare zstd for preboot environment, improve performance
Clang support on i386 kernels too.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=lmlO
-----END PGP SIGNATURE-----
Merge tag 'x86-asm-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 asm updates from Ingo Molnar:
"A couple of changes, concentrated into the percpu code, to enable
Clang support on i386 kernels too"
[ And cleans up the macros to generate percpu ops a lot too - Linus ]
* tag 'x86-asm-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/uaccess: Make __get_user_size() Clang compliant on 32-bit
x86/percpu: Remove unused PER_CPU() macro
x86/percpu: Clean up percpu_stable_op()
x86/percpu: Clean up percpu_cmpxchg_op()
x86/percpu: Clean up percpu_xchg_op()
x86/percpu: Clean up percpu_add_return_op()
x86/percpu: Remove "e" constraint from XADD
x86/percpu: Clean up percpu_add_op()
x86/percpu: Clean up percpu_from_op()
x86/percpu: Clean up percpu_to_op()
x86/percpu: Introduce size abstraction macros
- Improve uclamp performance by using a static key for the fast path
- Add the "sched_util_clamp_min_rt_default" sysctl, to optimize for
better power efficiency of RT tasks on battery powered devices.
(The default is to maximize performance & reduce RT latencies.)
- Improve utime and stime tracking accuracy, which had a fixed boundary
of error, which created larger and larger relative errors as the values
become larger. This is now replaced with more precise arithmetics,
using the new mul_u64_u64_div_u64() helper in math64.h.
- Improve the deadline scheduler, such as making it capacity aware
- Improve frequency-invariant scheduling
- Misc cleanups in energy/power aware scheduling
- Add sched_update_nr_running tracepoint to track changes to nr_running
- Documentation additions and updates
- Misc cleanups and smaller fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=PbO7
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Improve uclamp performance by using a static key for the fast path
- Add the "sched_util_clamp_min_rt_default" sysctl, to optimize for
better power efficiency of RT tasks on battery powered devices.
(The default is to maximize performance & reduce RT latencies.)
- Improve utime and stime tracking accuracy, which had a fixed boundary
of error, which created larger and larger relative errors as the
values become larger. This is now replaced with more precise
arithmetics, using the new mul_u64_u64_div_u64() helper in math64.h.
- Improve the deadline scheduler, such as making it capacity aware
- Improve frequency-invariant scheduling
- Misc cleanups in energy/power aware scheduling
- Add sched_update_nr_running tracepoint to track changes to nr_running
- Documentation additions and updates
- Misc cleanups and smaller fixes
* tag 'sched-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
sched/doc: Factorize bits between sched-energy.rst & sched-capacity.rst
sched/doc: Document capacity aware scheduling
sched: Document arch_scale_*_capacity()
arm, arm64: Fix selection of CONFIG_SCHED_THERMAL_PRESSURE
Documentation/sysctl: Document uclamp sysctl knobs
sched/uclamp: Add a new sysctl to control RT default boost value
sched/uclamp: Fix a deadlock when enabling uclamp static key
sched: Remove duplicated tick_nohz_full_enabled() check
sched: Fix a typo in a comment
sched/uclamp: Remove unnecessary mutex_init()
arm, arm64: Select CONFIG_SCHED_THERMAL_PRESSURE
sched: Cleanup SCHED_THERMAL_PRESSURE kconfig entry
arch_topology, sched/core: Cleanup thermal pressure definition
trace/events/sched.h: fix duplicated word
linux/sched/mm.h: drop duplicated words in comments
smp: Fix a potential usage of stale nr_cpus
sched/fair: update_pick_idlest() Select group with lowest group_util when idle_cpus are equal
sched: nohz: stop passing around unused "ticks" parameter.
sched: Better document ttwu()
sched: Add a tracepoint to track rq->nr_running
...
- Add uncore support for Intel Comet Lake
- Add RAPL support for Hygon Fam18h
- Add Intel "IIO stack to PMON mapping" support on Skylake-SP CPUs,
which enumerates per device performance counters via sysfs and enables
the perf stat --iiostat functionality
- Add support for Intel "Architectural LBRs", which generalized the model
specific LBR hardware tracing feature into a model-independent, architected
performance monitoring feature. Usage is mostly seamless to tooling, as the
pre-existing LBR features are kept, but there's a couple of advantages
under the hood, such as faster context-switching, faster LBR reads,
cleaner exposure of LBR features to guest kernels, etc.
( Since architectural LBRs are supported via XSAVE, there's related
changes to the x86 FPU code as well. )
- ftrace/perf updates: Add support to add a text poke event to record changes
to kernel text (i.e. self-modifying code) in order to
support tracers like Intel PT decoding through
jump labels, kprobes and ftrace trampolines.
- Misc cleanups, smaller fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=4pKU
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event updates from Ingo Molnar:
"HW support updates:
- Add uncore support for Intel Comet Lake
- Add RAPL support for Hygon Fam18h
- Add Intel "IIO stack to PMON mapping" support on Skylake-SP CPUs,
which enumerates per device performance counters via sysfs and
enables the perf stat --iiostat functionality
- Add support for Intel "Architectural LBRs", which generalized the
model specific LBR hardware tracing feature into a
model-independent, architected performance monitoring feature.
Usage is mostly seamless to tooling, as the pre-existing LBR
features are kept, but there's a couple of advantages under the
hood, such as faster context-switching, faster LBR reads, cleaner
exposure of LBR features to guest kernels, etc.
( Since architectural LBRs are supported via XSAVE, there's related
changes to the x86 FPU code as well. )
ftrace/perf updates:
- Add support to add a text poke event to record changes to kernel
text (i.e. self-modifying code) in order to support tracers like
Intel PT decoding through jump labels, kprobes and ftrace
trampolines.
Misc cleanups, smaller fixes..."
* tag 'perf-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (47 commits)
perf/x86/rapl: Add Hygon Fam18h RAPL support
kprobes: Remove unnecessary module_mutex locking from kprobe_optimizer()
x86/perf: Fix a typo
perf: <linux/perf_event.h>: drop a duplicated word
perf/x86/intel/lbr: Support XSAVES for arch LBR read
perf/x86/intel/lbr: Support XSAVES/XRSTORS for LBR context switch
x86/fpu/xstate: Add helpers for LBR dynamic supervisor feature
x86/fpu/xstate: Support dynamic supervisor feature for LBR
x86/fpu: Use proper mask to replace full instruction mask
perf/x86: Remove task_ctx_size
perf/x86/intel/lbr: Create kmem_cache for the LBR context data
perf/core: Use kmem_cache to allocate the PMU specific data
perf/core: Factor out functions to allocate/free the task_ctx_data
perf/x86/intel/lbr: Support Architectural LBR
perf/x86/intel/lbr: Factor out intel_pmu_store_lbr
perf/x86/intel/lbr: Factor out rdlbr_all() and wrlbr_all()
perf/x86/intel/lbr: Mark the {rd,wr}lbr_{to,from} wrappers __always_inline
perf/x86/intel/lbr: Unify the stored format of LBR information
perf/x86/intel/lbr: Support LBR_CTL
perf/x86: Expose CPUID enumeration bits for arch LBR
...
- LKMM updates: mostly documentation changes, but also some new litmus tests for atomic ops.
- KCSAN updates: the most important change is that GCC 11 now has all fixes in place
to support KCSAN, so GCC support can be enabled again. Also more annotations.
- futex updates: minor cleanups and simplifications
- seqlock updates: merge preparatory changes/cleanups for the 'associated locks' facilities.
- lockdep updates:
- simplify IRQ trace event handling
- add various new debug checks
- simplify header dependencies, split out <linux/lockdep_types.h>, decouple
lockdep from other low level headers some more
- fix NMI handling
- misc cleanups and smaller fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=3MTT
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- LKMM updates: mostly documentation changes, but also some new litmus
tests for atomic ops.
- KCSAN updates: the most important change is that GCC 11 now has all
fixes in place to support KCSAN, so GCC support can be enabled again.
Also more annotations.
- futex updates: minor cleanups and simplifications
- seqlock updates: merge preparatory changes/cleanups for the
'associated locks' facilities.
- lockdep updates:
- simplify IRQ trace event handling
- add various new debug checks
- simplify header dependencies, split out <linux/lockdep_types.h>,
decouple lockdep from other low level headers some more
- fix NMI handling
- misc cleanups and smaller fixes
* tag 'locking-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
kcsan: Improve IRQ state trace reporting
lockdep: Refactor IRQ trace events fields into struct
seqlock: lockdep assert non-preemptibility on seqcount_t write
lockdep: Add preemption enabled/disabled assertion APIs
seqlock: Implement raw_seqcount_begin() in terms of raw_read_seqcount()
seqlock: Add kernel-doc for seqcount_t and seqlock_t APIs
seqlock: Reorder seqcount_t and seqlock_t API definitions
seqlock: seqcount_t latch: End read sections with read_seqcount_retry()
seqlock: Properly format kernel-doc code samples
Documentation: locking: Describe seqlock design and usage
locking/qspinlock: Do not include atomic.h from qspinlock_types.h
locking/atomic: Move ATOMIC_INIT into linux/types.h
lockdep: Move list.h inclusion into lockdep.h
locking/lockdep: Fix TRACE_IRQFLAGS vs. NMIs
futex: Remove unused or redundant includes
futex: Consistently use fshared as boolean
futex: Remove needless goto's
futex: Remove put_futex_key()
rwsem: fix commas in initialisation
docs: locking: Replace HTTP links with HTTPS ones
...
that helps the debugging of IRQ affinity logic bugs, and fix a memory leak.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=oKU9
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2020-08-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
"Fix a recent IRQ affinities regression, add in a missing debugfs
printout that helps the debugging of IRQ affinity logic bugs, and fix
a memory leak"
* tag 'irq-urgent-2020-08-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/debugfs: Add missing irqchip flags
genirq/affinity: Make affinity setting if activated opt-in
irqdomain/treewide: Free firmware node after domain removal
Pull crypto updates from Herbert Xu:
"API:
- Add support for allocating transforms on a specific NUMA Node
- Introduce the flag CRYPTO_ALG_ALLOCATES_MEMORY for storage users
Algorithms:
- Drop PMULL based ghash on arm64
- Fixes for building with clang on x86
- Add sha256 helper that does the digest in one go
- Add SP800-56A rev 3 validation checks to dh
Drivers:
- Permit users to specify NUMA node in hisilicon/zip
- Add support for i.MX6 in imx-rngc
- Add sa2ul crypto driver
- Add BA431 hwrng driver
- Add Ingenic JZ4780 and X1000 hwrng driver
- Spread IRQ affinity in inside-secure and marvell/cesa"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (157 commits)
crypto: sa2ul - Fix inconsistent IS_ERR and PTR_ERR
hwrng: core - remove redundant initialization of variable ret
crypto: x86/curve25519 - Remove unused carry variables
crypto: ingenic - Add hardware RNG for Ingenic JZ4780 and X1000
dt-bindings: RNG: Add Ingenic RNG bindings.
crypto: caam/qi2 - add module alias
crypto: caam - add more RNG hw error codes
crypto: caam/jr - remove incorrect reference to caam_jr_register()
crypto: caam - silence .setkey in case of bad key length
crypto: caam/qi2 - create ahash shared descriptors only once
crypto: caam/qi2 - fix error reporting for caam_hash_alloc
crypto: caam - remove deadcode on 32-bit platforms
crypto: ccp - use generic power management
crypto: xts - Replace memcpy() invocation with simple assignment
crypto: marvell/cesa - irq balance
crypto: inside-secure - irq balance
crypto: ecc - SP800-56A rev 3 local public key validation
crypto: dh - SP800-56A rev 3 local public key validation
crypto: dh - check validity of Z before export
lib/mpi: Add mpi_sub_ui()
...
* pm-cpufreq: (24 commits)
cpufreq: intel_pstate: Fix EPP setting via sysfs in active mode
cpufreq: intel_pstate: Rearrange the storing of new EPP values
cpufreq: intel_pstate: Avoid enabling HWP if EPP is not supported
cpufreq: intel_pstate: Clean up aperf_mperf_shift description
cpufreq: powernv: Make some symbols static
cpufreq: amd_freq_sensitivity: Mark sometimes used ID structs as __maybe_unused
cpufreq: intel_pstate: Supply struct attribute description for get_aperf_mperf_shift()
cpufreq: pcc-cpufreq: Mark sometimes used ID structs as __maybe_unused
cpufreq: powernow-k8: Mark 'hi' and 'lo' dummy variables as __always_unused
cpufreq: acpi-cpufreq: Mark sometimes used ID structs as __maybe_unused
cpufreq: acpi-cpufreq: Mark 'dummy' variable as __always_unused
cpufreq: powernv-cpufreq: Fix a bunch of kerneldoc related issues
cpufreq: pasemi: Include header file for {check,restore}_astate prototypes
cpufreq: cpufreq_governor: Demote store_sampling_rate() header to standard comment block
cpufreq: cpufreq: Demote lots of function headers unworthy of kerneldoc status
cpufreq: freq_table: Demote obvious misuse of kerneldoc to standard comment blocks
cpufreq: Replace HTTP links with HTTPS ones
cpufreq: intel_pstate: Fix static checker warning for epp variable
cpufreq: Remove the weakly defined cpufreq_default_governor()
cpufreq: Specify default governor on command line
...
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=deY3
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2020-08-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
"A single fix for a potential deadlock when printing a message about
spurious interrupts"
* tag 'x86-urgent-2020-08-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/i8259: Use printk_deferred() to prevent deadlock
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl8mdWQUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroM48Qf/eUYXVdGQWErQ/BQR/pLPfTUkjkIj
1C/IGogWijbWPQrtIsnXVG53eULgHocbfzExZ8PzUSfjuZ/g9V8aHGbrGKbg/y6g
SVArpCTu+BDidmLMbjsAKh3f5SEbzZZuFKnoxoEEKiA2TeYqDQ05nxcv9+T4udrs
DWqXnk27y0vR9RtJkf5sqDnyH36cDT9TsbRFPaCt/hFE0UA65UTtWgl1ZaagzmuL
I70z5Ap+/6fsEMoKoys9AKSCpLRGUBu/42fQhZkEq9no0w5PBkzn/YMfapHwT9I+
1i9WUv3gn+FQOXpqAg0+aaPtWwIBIEONbm0qmw4yNNUI24Btq2QjGWxRqg==
=VQPu
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Bugfixes and strengthening the validity checks on inputs from new
userspace APIs.
Now I know why I shouldn't prepare pull requests on the weekend, it's
hard to concentrate if your son is shouting about his latest Minecraft
builds in your ear. Fortunately all the patches were ready and I just
had to check the test results..."
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Fix disable pause loop exit/pause filtering capability on SVM
KVM: LAPIC: Prevent setting the tscdeadline timer if the lapic is hw disabled
KVM: arm64: Don't inherit exec permission across page-table levels
KVM: arm64: Prevent vcpu_has_ptrauth from generating OOL functions
KVM: nVMX: check for invalid hdr.vmx.flags
KVM: nVMX: check for required but missing VMCS12 in KVM_SET_NESTED_STATE
selftests: kvm: do not set guest mode flag
The sev_pin_memory() function was modified to return error pointers
instead of NULL but there are two problems. The first problem is that
if "npages" is zero then it still returns NULL. Secondly, several of
the callers were not updated to check for error pointers instead of
NULL.
Either one of these issues will lead to an Oops.
Fixes: a8d908b587 ("KVM: x86: report sev_pin_memory errors with PTR_ERR")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Message-Id: <20200714142351.GA315374@mwanda>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull v5.9 KCSAN bits from Paul E. McKenney.
Perhaps the most important change is that GCC 11 now has all fixes in place
to support KCSAN, so GCC support can be enabled again.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Conflicts:
arch/arm/include/asm/percpu.h
As Stephen Rothwell noted, there's a conflict between this commit
in locking/core:
a21ee6055c ("lockdep: Change hardirq{s_enabled,_context} to per-cpu variables")
and this fresh upstream commit:
aa54ea903a ("ARM: percpu.h: fix build error")
a21ee6055c is a simpler solution to the dependency problem and doesn't
further increase header hell - so this conflict resolution effectively
reverts aa54ea903a and uses the a21ee6055c solution.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pick up and resolve the NMI entry code changes from the locking tree,
and also pick up the latest two fixes from tip:core/entry.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- Add support for zstd compressed kernel
- Define __DISABLE_EXPORTS in Makefile
- Remove __DISABLE_EXPORTS definition from kaslr.c
- Bump the heap size for zstd.
- Update the documentation.
Integrates the ZSTD decompression code to the x86 pre-boot code.
Zstandard requires slightly more memory during the kernel decompression
on x86 (192 KB vs 64 KB), and the memory usage is independent of the
window size.
__DISABLE_EXPORTS is now defined in the Makefile, which covers both
the existing use in kaslr.c, and the use needed by the zstd decompressor
in misc.c.
This patch has been boot tested with both a zstd and gzip compressed
kernel on i386 and x86_64 using buildroot and QEMU.
Additionally, this has been tested in production on x86_64 devices.
We saw a 2 second boot time reduction by switching kernel compression
from xz to zstd.
Signed-off-by: Nick Terrell <terrelln@fb.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200730190841.2071656-7-nickrterrell@gmail.com
Bump the ZO_z_extra_bytes margin for zstd.
Zstd needs 3 bytes per 128 KB, and has a 22 byte fixed overhead.
Zstd needs to maintain 128 KB of space at all times, since that is
the maximum block size. See the comments regarding in-place
decompression added in lib/decompress_unzstd.c for details.
The existing code is written so that all the compression algorithms use
the same ZO_z_extra_bytes. It is taken to be the maximum of the growth
rate plus the maximum fixed overhead. The comments just above this diff
state that:
Signed-off-by: Nick Terrell <terrelln@fb.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200730190841.2071656-6-nickrterrell@gmail.com
Change the type of local variables/fields that store mem_vector
addresses to u64 to make it less likely that 32-bit overflow will cause
issues on 32-bit.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200728225722.67457-21-nivedita@alum.mit.edu
Change type of minimum/image_size arguments in process_mem_region to
'unsigned long'. These actually can never be above 4G (even on x86_64),
and they're 'unsigned long' in every other function except this one.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200728225722.67457-19-nivedita@alum.mit.edu
Just a trivial rearrangement to do all the processing together, and only
have one call to slots_fetch_random() in the source.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200728225722.67457-18-nivedita@alum.mit.edu
Drop unnecessary alignment of image_size to CONFIG_PHYSICAL_ALIGN in
find_random_virt_addr, it cannot change the result: the largest valid
slot is the largest n that satisfies
minimum + n * CONFIG_PHYSICAL_ALIGN + image_size <= KERNEL_IMAGE_SIZE
(since minimum is already aligned) and so n is equal to
(KERNEL_IMAGE_SIZE - minimum - image_size) / CONFIG_PHYSICAL_ALIGN
even if image_size is not aligned to CONFIG_PHYSICAL_ALIGN.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200728225722.67457-17-nivedita@alum.mit.edu
Drop unnecessary check that number of slots is not zero in
store_slot_info, it's guaranteed to be at least 1 by the calculation.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200728225722.67457-16-nivedita@alum.mit.edu
The number of slots can be 'unsigned int', since on 64-bit, the maximum
amount of memory is 2^52, the minimum alignment is 2^21, so the slot
number cannot be greater than 2^31. But in case future processors have
more than 52 physical address bits, make it 'unsigned long'.
The slot areas are limited by MAX_SLOT_AREA, currently 100. It is
indexed by an int, but the number of areas is stored as 'unsigned long'.
Change both to 'unsigned int' for consistency.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200728225722.67457-15-nivedita@alum.mit.edu
This check doesn't save anything. In the case when none of the
parameters are present, each strstr will scan args twice (once to find
the length and then for searching), six scans in total. Just going ahead
and parsing the arguments only requires three scans: strlen, memcpy, and
parsing. This will be the first malloc, so free will actually free up
the memory, so the check doesn't save heap space either.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200728225722.67457-14-nivedita@alum.mit.edu
32-bit does not have GB pages, so don't bother checking for them. Using
the IS_ENABLED() macro allows the compiler to completely remove the
gb_huge_pages code.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200728225722.67457-12-nivedita@alum.mit.edu
Clip the start and end of the region to minimum and mem_limit prior to
the loop. region.start can only increase during the loop, so raising it
to minimum before the loop is enough.
A region that becomes empty due to this will get checked in
the first iteration of the loop.
Drop the check for overlap extending beyond the end of the region. This
will get checked in the next loop iteration anyway.
Rename end to region_end for symmetry with region.start.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200728225722.67457-10-nivedita@alum.mit.edu
region.size can be trimmed to store the portion of the region before the
overlap, instead of a separate mem_vector variable.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200728225722.67457-9-nivedita@alum.mit.edu
In case of an overlap, the beginning of the region should be used even
if it is exactly image_size, not just strictly larger.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200728225722.67457-6-nivedita@alum.mit.edu
On 64-bit, the kernel must be placed below MAXMEM (64TiB with 4-level
paging or 4PiB with 5-level paging). This is currently not enforced by
KASLR, which thus implicitly relies on physical memory being limited to
less than 64TiB.
On 32-bit, the limit is KERNEL_IMAGE_SIZE (512MiB). This is enforced by
special checks in __process_mem_region().
Initialize mem_limit to the maximum (depending on architecture), instead
of ULLONG_MAX, and make sure the command-line arguments can only
decrease it. This makes the enforcement explicit on 64-bit, and
eliminates the 32-bit specific checks to keep the kernel below 512M.
Check upfront to make sure the minimum address is below the limit before
doing any work.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200727230801.3468620-5-nivedita@alum.mit.edu
Since commit:
0982adc746 ("x86/boot/KASLR: Work around firmware bugs by excluding EFI_BOOT_SERVICES_* and EFI_LOADER_* from KASLR's choice")
process_efi_entries() will return true if we have an EFI memmap, not just
if it contained EFI_MEMORY_MORE_RELIABLE regions.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200727230801.3468620-4-nivedita@alum.mit.edu
Drop the warning on seeing "--" in handle_mem_options(). This will trigger
whenever one of the memory options is present in the command line
together with "--", but there's no problem if that is the case.
Replace goto with break.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200727230801.3468620-3-nivedita@alum.mit.edu
Handle the possibility that the command line is NULL.
Replace open-coded strlen with a function call.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200727230801.3468620-2-nivedita@alum.mit.edu
The carry variables are assigned but never used, which upsets
the compiler. This patch removes them.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Karthikeyan Bhargavan <karthik.bhargavan@gmail.com>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
It is a little different between Intel and AMD, Intel's bit 2
is 0 and AMD is reserved. On bare-metal, Intel will refuse to set
APIC_TDCR once bits except 0, 1, 3 are setting, however, AMD will
accept bits 0, 1, 3 and ignore other bits setting as patch does.
Before the patch, we can get back anything what we set to the
APIC_TDCR, this patch improves it.
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1596165141-28874-2-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
'Commit 8566ac8b8e ("KVM: SVM: Implement pause loop exit logic in SVM")'
drops disable pause loop exit/pause filtering capability completely, I
guess it is a merge fault by Radim since disable vmexits capabilities and
pause loop exit for SVM patchsets are merged at the same time. This patch
reintroduces the disable pause loop exit/pause filtering capability support.
Reported-by: Haiwei Li <lihaiwei@tencent.com>
Tested-by: Haiwei Li <lihaiwei@tencent.com>
Fixes: 8566ac8b ("KVM: SVM: Implement pause loop exit logic in SVM")
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1596165141-28874-3-git-send-email-wanpengli@tencent.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Prevent setting the tscdeadline timer if the lapic is hw disabled.
Fixes: bce87cce88 (KVM: x86: consolidate different ways to test for in-kernel LAPIC)
Cc: <stable@vger.kernel.org>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1596165141-28874-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Capture the max TDP level during kvm_configure_mmu() instead of using a
kvm_x86_ops hook to do it at every vCPU creation.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200716034122.5998-10-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename max_page_level to explicitly call out that it tracks the max huge
page level so as to avoid confusion when a future patch moves the max
TDP level, i.e. max root level, into the MMU and kvm_configure_mmu().
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200716034122.5998-9-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Calculate the desired TDP level on the fly using the max TDP level and
MAXPHYADDR instead of doing the same when CPUID is updated. This avoids
the hidden dependency on cpuid_maxphyaddr() in vmx_get_tdp_level() and
also standardizes the "use 5-level paging iff MAXPHYADDR > 48" behavior
across x86.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200716034122.5998-8-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the WARN in vmx_load_mmu_pgd() that was temporarily added to aid
bisection/debug in the event the current MMU's shadow root level didn't
match VMX's computed EPTP level.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200716034122.5998-7-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the shadow_root_level from the current MMU as the root level for the
PGD, i.e. for VMX's EPTP. This eliminates the weird dependency between
VMX and the MMU where both must independently calculate the same root
level for things to work correctly. Temporarily keep VMX's calculation
of the level and use it to WARN if the incoming level diverges.
Opportunistically refactor kvm_mmu_load_pgd() to avoid indentation hell,
and rename a 'cr3' param in the load_mmu_pgd prototype that managed to
survive the cr3 purge.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200716034122.5998-6-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make vmx_load_mmu_pgd() static as it is no longer invoked directly by
nested VMX (or any code for that matter).
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200716034122.5998-5-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Refactor the shadow NPT role calculation into a separate helper to
better differentiate it from the non-nested shadow MMU, e.g. the NPT
variant is never direct and derives its root level from the TDP level.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200716034122.5998-3-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove an extra declaration of construct_eptp() from vmx.h.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200716034122.5998-4-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the initialization of shadow NPT MMU's shadow_root_level into
kvm_init_shadow_npt_mmu() and explicitly set the level in the shadow NPT
MMU's role to be the TDP level. This ensures the role and MMU levels
are synchronized and also initialized before __kvm_mmu_new_pgd(), which
consumes the level when attempting a fast PGD switch.
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Fixes: 9fa72119b2 ("kvm: x86: Introduce kvm_mmu_calc_root_page_role()")
Fixes: a506fdd223 ("KVM: nSVM: implement nested_svm_load_cr3() and use it for host->guest switch")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200716034122.5998-2-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The comments explicitely explain that the work flags check and handling in
kvm_run_vcpu() is done with preemption and interrupts enabled as KVM
invokes the check again right before entering guest mode with interrupts
disabled which guarantees that the work flags are observed and handled
before VMENTER.
Nevertheless the flag pending check in kvm_run_vcpu() uses the helper
variant which requires interrupts to be disabled triggering an instant
lockdep splat. This was caught in testing before and then not fixed up in
the patch before applying. :(
Use the relaxed and intentionally racy __xfer_to_guest_mode_work_pending()
instead.
Fixes: 72c3c0fe54 ("x86/kvm: Use generic xfer to guest work function")
Reported-by: Qian Cai <cai@lca.pw> writes:
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/87bljxa2sa.fsf@nanos.tec.linutronix.de
Remove the special handling for multiple floppies in the initrd code.
No one should be using floppies for booting these days. (famous last
words..)
Includes a spelling fix from Colin Ian King <colin.king@canonical.com>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
0day reported a possible circular locking dependency:
Chain exists of:
&irq_desc_lock_class --> console_owner --> &port_lock_key
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&port_lock_key);
lock(console_owner);
lock(&port_lock_key);
lock(&irq_desc_lock_class);
The reason for this is a printk() in the i8259 interrupt chip driver
which is invoked with the irq descriptor lock held, which reverses the
lock operations vs. printk() from arbitrary contexts.
Switch the printk() to printk_deferred() to avoid that.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87365abt2v.fsf@nanos.tec.linutronix.de
This patch moves ATOMIC_INIT from asm/atomic.h into linux/types.h.
This allows users of atomic_t to use ATOMIC_INIT without having to
include atomic.h as that way may lead to header loops.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Link: https://lkml.kernel.org/r/20200729123105.GB7047@gondor.apana.org.au
Hygon Family 18h(Dhyana) support RAPL in bit 14 of CPUID 0x80000007 EDX,
and has MSRs RAPL_PWR_UNIT/CORE_ENERGY_STAT/PKG_ENERGY_STAT. So add Hygon
Dhyana Family 18h support for RAPL.
The output is available via the energy-pkg pseudo event:
$ perf stat -a -I 1000 --per-socket -e power/energy-pkg/
[ mingo: Tidied up the initializers. ]
Signed-off-by: Pu Wen <puwen@hygon.cn>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200720082205.1307-1-puwen@hygon.cn
All instances of ->get() in arch/x86 switched; that might or might
not be worth splitting up. Notes:
* for xstateregs_get() the amount we want to store is determined at
the boot time; see init_xstate_size() and update_regset_xstate_info() for
details. task->thread.fpu.state.xsave ends with a flexible array member and
the amount of data in it depends upon the FPU features supported/enabled.
* fpregs_get() writes slightly less than full ->thread.fpu.state.fsave
(the last word is not copied); we pass the full size of state.fsave and let
membuf_write() trim to the amount declared by regset - __regset_get() will
make sure that the space in buffer is no more than that.
* copy_xstate_to_user() and its helpers are gone now.
* fpregs_soft_get() was getting user_regset_copyout() arguments
wrong. Since "x86: x86 user_regset math_emu" back in 2008... I really
doubt that it's worth splitting out for -stable, though - you need
a 486SX box for that to trigger...
[Kevin's braino fix for copy_xstate_to_kernel() essentially duplicated here]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
all uses are conditional upon ELF_CORE_COPY_XFPREGS, which has not
been defined on any architecture since 2010
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Instead of using magic values, use macros.
Signed-off-by: Haiwei Li <lihaiwei@tencent.com>
Message-Id: <4c072161-80dd-b7ed-7adb-02acccaa0701@gmail.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
John reported that on a RK3288 system the perf per CPU interrupts are all
affine to CPU0 and provided the analysis:
"It looks like what happens is that because the interrupts are not per-CPU
in the hardware, armpmu_request_irq() calls irq_force_affinity() while
the interrupt is deactivated and then request_irq() with IRQF_PERCPU |
IRQF_NOBALANCING.
Now when irq_startup() runs with IRQ_STARTUP_NORMAL, it calls
irq_setup_affinity() which returns early because IRQF_PERCPU and
IRQF_NOBALANCING are set, leaving the interrupt on its original CPU."
This was broken by the recent commit which blocked interrupt affinity
setting in hardware before activation of the interrupt. While this works in
general, it does not work for this particular case. As contrary to the
initial analysis not all interrupt chip drivers implement an activate
callback, the safe cure is to make the deferred interrupt affinity setting
at activation time opt-in.
Implement the necessary core logic and make the two irqchip implementations
for which this is required opt-in. In hindsight this would have been the
right thing to do, but ...
Fixes: baedb87d1b ("genirq/affinity: Handle affinity setting on inactive interrupts correctly")
Reported-by: John Keeping <john@metanate.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Marc Zyngier <maz@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/87blk4tzgm.fsf@nanos.tec.linutronix.de
Prior to commit:
859d069ee1 ("lockdep: Prepare for NMI IRQ state tracking")
IRQ state tracking was disabled in NMIs due to nmi_enter()
doing lockdep_off() -- with the obvious requirement that NMI entry
call nmi_enter() before trace_hardirqs_off().
[ AFAICT, PowerPC and SH violate this order on their NMI entry ]
However, that commit explicitly changed lockdep_hardirqs_*() to ignore
lockdep_off() and breaks every architecture that has irq-tracing in
it's NMI entry that hasn't been fixed up (x86 being the only fixed one
at this point).
The reason for this change is that by ignoring lockdep_off() we can:
- get rid of 'current->lockdep_recursion' in lockdep_assert_irqs*()
which was going to to give header-recursion issues with the
seqlock rework.
- allow these lockdep_assert_*() macros to function in NMI context.
Restore the previous state of things and allow an architecture to
opt-in to the NMI IRQ tracking support, however instead of relying on
lockdep_off(), rely on in_nmi(), both are part of nmi_enter() and so
over-all entry ordering doesn't need to change.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200727124852.GK119549@hirez.programming.kicks-ass.net
hdr.vmx.flags is meant for future extensions to the ABI, rejecting
invalid flags is necessary to avoid broken half-loads of the
nVMX state.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A missing VMCS12 was not causing -EINVAL (it was just read with
copy_from_user, so it is not a security issue, but it is still
wrong). Test for VMCS12 validity and reject the nested state
if a VMCS12 is required but not present.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of having #ifdef/#endif blocks inside sync_core() for X86_64 and
X86_32, implement the new function iret_to_self() with two versions.
In this manner, avoid having to use even more more #ifdef/#endif blocks
when adding support for SERIALIZE in sync_core().
Co-developed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200727043132.15082-4-ricardo.neri-calderon@linux.intel.com
Having sync_core() in processor.h is problematic since it is not possible
to check for hardware capabilities via the *cpu_has() family of macros.
The latter needs the definitions in processor.h.
It also looks more intuitive to relocate the function to sync_core.h.
This changeset does not make changes in functionality.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20200727043132.15082-3-ricardo.neri-calderon@linux.intel.com
The Intel architecture defines a set of Serializing Instructions (a
detailed definition can be found in Vol.3 Section 8.3 of the Intel "main"
manual, SDM). However, these instructions do more than what is required,
have side effects and/or may be rather invasive. Furthermore, some of
these instructions are only available in kernel mode or may cause VMExits.
Thus, software using these instructions only to serialize execution (as
defined in the manual) must handle the undesired side effects.
As indicated in the name, SERIALIZE is a new Intel architecture
Serializing Instruction. Crucially, it does not have any of the mentioned
side effects. Also, it does not cause VMExit and can be used in user mode.
This new instruction is currently documented in the latest "extensions"
manual (ISE). It will appear in the "main" manual in the future.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20200727043132.15082-2-ricardo.neri-calderon@linux.intel.com
The function is only called from within init_64.c and can be static.
Also remove it from pgtable_64.h.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/20200721095953.6218-4-joro@8bytes.org
Remove the code to sync the vmalloc and ioremap ranges for x86-64. The
page-table pages are all pre-allocated now so that synchronization is
no longer necessary.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/20200721095953.6218-3-joro@8bytes.org
Pre-allocate the page-table pages for the vmalloc area at the level
which needs synchronization on x86-64, which is P4D for 5-level and
PUD for 4-level paging.
Doing this at boot makes sure no synchronization of that area is
necessary at runtime. The synchronization takes the pgd_lock and
iterates over all page-tables in the system, so it can take quite long
and is better avoided.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/20200721095953.6218-2-joro@8bytes.org
The pointer bitmap is being initialized with a plain integer 0,
fix this by initializing it with a NULL instead.
Cleans up sparse warning:
arch/x86/xen/enlighten_pv.c:876:27: warning: Using plain integer
as NULL pointer
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20200721100217.407975-1-colin.king@canonical.com
Resolve conflicts with ongoing lockdep work that fixed the NMI entry code.
Conflicts:
arch/x86/entry/common.c
arch/x86/include/asm/idtentry.h
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The UDP reuseport conflict was a little bit tricky.
The net-next code, via bpf-next, extracted the reuseport handling
into a helper so that the BPF sk lookup code could invoke it.
At the same time, the logic for reuseport handling of unconnected
sockets changed via commit efc6b6f6c3
which changed the logic to carry on the reuseport result into the
rest of the lookup loop if we do not return immediately.
This requires moving the reuseport_has_conns() logic into the callers.
While we are here, get rid of inline directives as they do not belong
in foo.c files.
The other changes were cases of more straightforward overlapping
modifications.
Signed-off-by: David S. Miller <davem@davemloft.net>
- Fix a section end page alignment assumption that was causing crashes
- Fix ORC unwinding on freshly forked tasks which haven't executed yet
and which have empty user task stacks
- Fix the debug.exception-trace=1 sysctl dumping of user stacks, which
was broken by recent maccess changes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=oamN
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master
Pull x86 fixes from Ingo Molnar:
"Misc fixes:
- Fix a section end page alignment assumption that was causing
crashes
- Fix ORC unwinding on freshly forked tasks which haven't executed
yet and which have empty user task stacks
- Fix the debug.exception-trace=1 sysctl dumping of user stacks,
which was broken by recent maccess changes"
* tag 'x86-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/dumpstack: Dump user space code correctly again
x86/stacktrace: Fix reliable check for empty user task stacks
x86/unwind/orc: Fix ORC for newly forked tasks
x86, vmlinux.lds: Page-align end of ..page_aligned sections
If the TSC frequency is known from the pvclock page,
the TSC frequency does not need to be recalibrated.
We can avoid recalibration by setting X86_FEATURE_TSC_KNOWN_FREQ.
Signed-off-by: Hayato Ohhashi <o8@vmm.dev>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20200721161231.6019-1-o8@vmm.dev
Add Sapphire Rapids and Alder Lake processors to CPU list to enumerate
and enable the split lock feature.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/1595634320-79689-1-git-send-email-fenghua.yu@intel.com
Perform a 'make savedefconfig' pass over our main defconfig files,
which keeps the defconfig result the same, but compresses
the file where defaults were changed, options removed or
reordered.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200724130638.645844-2-mingo@kernel.org
AFAICS the last uses of directly 'making' kernel PGDs was removed 7 years ago:
8b78c21d72: ("x86, 64bit, mm: hibernate use generic mapping_init")
Where the explicit PGD walking loop was replaced with kernel_ident_mapping_init()
calls. This was then (unnecessarily) carried over through the 5-level paging conversion.
Also clean up the 'level' comments a bit, to convey the original, meanwhile somewhat
bit-rotten notion, that these are empty comment blocks with no methods to handle any
of the levels except the PTE level.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200724114418.629021-4-mingo@kernel.org
Last use of them was removed 13 years ago, when the code was converted
to use CYC2NS_SCALE_FACTOR:
53d517cdba: ("x86: scale cyc_2_nsec according to CPU frequency")
The current TSC code uses the 'struct cyc2ns_data' scaling abstraction,
the old fixed scaling approach is long gone.
This cleanup also removes the 'arbitralrily' typo from the comment,
so win-win. ;-)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200724114418.629021-3-mingo@kernel.org
The variable irq is being initialized with a value that is never read
and it is being updated later with a new value. The initialization is
redundant and can be removed.
Addresses-Coverity: ("Unused value")
Link: https://lore.kernel.org/r/20200611123134.922395-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
This option is only required for vmlinux on 64-bit, to enforce 2MiB
alignment, so set it in LDFLAGS_vmlinux instead of KBUILD_LDFLAGS. Also
drop the ld-option check: this option was added in binutils-2.18 and all
the other places that use it already don't have the check.
This reduces the size of the intermediate ELF files
arch/x86/boot/setup.elf and arch/x86/realmode/rm/realmode.elf by about
2MiB each. The binary versions are unchanged.
Move the LDFLAGS settings to all be together and just after CFLAGS
settings are done.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Link: https://lore.kernel.org/r/20200722184334.3785418-1-nivedita@alum.mit.edu
Use the generic infrastructure to check for and handle pending work before
transitioning into guest mode.
This now handles TIF_NOTIFY_RESUME as well which was ignored so
far. Handling it is important as this covers task work and task work will
be used to offload the heavy lifting of POSIX CPU timers to thread context.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200722220520.979724969@linutronix.de
Replace the x86 variant with the generic version. Provide the relevant
architecture specific helper functions and defines.
Use a temporary define for idtentry_exit_user which will be cleaned up
seperately.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20200722220520.494648601@linutronix.de
Replace the syscall entry work handling with the generic version. Provide
the necessary helper inlines to handle the real architecture specific
parts, e.g. ptrace.
Use a temporary define for idtentry_enter_user which will be cleaned up
seperately.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20200722220520.376213694@linutronix.de
As a preparatory step for moving the syscall and interrupt entry/exit
handling into generic code, provide a pt_regs helper which retrieves the
interrupt state from pt_regs. This is required to check whether interrupts
are reenabled by return from interrupt/exception.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20200722220520.258511584@linutronix.de
Guests and user space share certain MSRs. KVM sets these MSRs to guest
values once and does not set them back to user space values on every VM
exit to spare the costly MSR operations.
User return notifiers ensure that these MSRs are set back to the correct
values before returning to user space in exit_to_usermode_loop().
There is no reason to evaluate the TIF flag indicating that user return
notifiers need to be invoked in the loop. The important point is that they
are invoked before returning to user space.
Move the invocation out of the loop into the section which does the last
preperatory steps before returning to user space. That section is not
preemptible and runs with interrupts disabled until the actual return.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200722220520.159112003@linutronix.de
64bit and 32bit entry code have the same open coded syscall entry handling
after the bitwidth specific bits.
Move it to a helper function and share the code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200722220520.051234096@linutronix.de
The user register sanity check is sprinkled all over the place. Move it
into enter_from_user_mode().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20200722220519.943016204@linutronix.de
Initially CONFIG_CRYPTO_AES_586=y was added to the i386_defconfig file in:
c1b362e3b4: ("x86: update defconfigs")
The code and Kconfig for CONFIG_CRYPTO_AES_586 was removed in:
1d2c327931: ("crypto: x86/aes - drop scalar assembler implementations")
Remove the leftover from the i386_defconfig file as well.
Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20200723171119.9881-1-sedat.dilek@gmail.com
Linus pointed out that compiler.h - which is a key header that gets included in every
single one of the 28,000+ kernel files during a kernel build - was bloated in:
6553896666: ("vmlinux.lds.h: Create section for protection against instrumentation")
Linus noted:
> I have pulled this, but do we really want to add this to a header file
> that is _so_ core that it gets included for basically every single
> file built?
>
> I don't even see those instrumentation_begin/end() things used
> anywhere right now.
>
> It seems excessive. That 53 lines is maybe not a lot, but it pushed
> that header file to over 12kB, and while it's mostly comments, it's
> extra IO and parsing basically for _every_ single file compiled in the
> kernel.
>
> For what appears to be absolutely zero upside right now, and I really
> don't see why this should be in such a core header file!
Move these primitives into a new header: <linux/instrumentation.h>, and include that
header in the headers that make use of it.
Unfortunately one of these headers is asm-generic/bug.h, which does get included
in a lot of places, similarly to compiler.h. So the de-bloating effect isn't as
good as we'd like it to be - but at least the interfaces are defined separately.
No change to functionality intended.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200604071921.GA1361070@gmail.com
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
The noinstr qualifier is to be specified before the return type in the
same way inline is used.
These 2 cases were missed by previous patches.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20200723161405.852613-1-ira.weiny@intel.com
The macro is not used anywhere, and has an incorrect value (going by the
comment) on x86_64 since commit c898faf91b ("x86: 46 bit physical address
support on 64 bits")
To avoid confusion, just remove the definition.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200723231544.17274-2-nivedita@alum.mit.edu
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl8UzA4eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGQ7cH/3v+Gv+SmHJCvaT2
CSu0+7okVnYbY3UTb3hykk7/aOqb6284KjxR03r0CWFzsEsZVhC5pvvruASSiMQg
Pi04sLqv6CsGLHd1n+pl4AUYEaxq6k4KS3uU3HHSWxrahDDApQoRUx2F8lpOxyj8
RiwnoO60IMPA7IFJqzcZuFqsgdxqiiYvnzT461KX8Mrw6fyMXeR2KAj2NwMX8dZN
At21Sf8+LSoh6q2HnugfiUd/jR10XbfxIIx2lXgIinb15GXgWydEQVrDJ7cUV7ix
Jd0S+dtOtp+lWtFHDoyjjqqsMV7+G8i/rFNZoxSkyZqsUTaKzaR6JD3moSyoYZgG
0+eXO4A=
=9EpR
-----END PGP SIGNATURE-----
Merge v5.8-rc6 into drm-next
I've got a silent conflict + two trees based on fixes to merge.
Fixes a silent merge with amdgpu
Signed-off-by: Dave Airlie <airlied@redhat.com>
Clang fails to compile __get_user_size() on 32-bit for the following code:
long long val;
__get_user(val, usrptr);
with: error: invalid output size for constraint '=q'
GCC compiles the same code without complaints.
The reason is that GCC and Clang are architecturally different, which leads
to subtle issues for code that's invalid but clearly dead, i.e. with code
that emulates polymorphism with the preprocessor and sizeof.
GCC will perform semantic analysis after early inlining and dead code
elimination, so it will not warn on invalid code that's dead. Clang
strictly performs optimizations after semantic analysis, so it will warn
for dead code.
Neither Clang nor GCC like this very much with -m32:
long long ret;
asm ("movb $5, %0" : "=q" (ret));
However, GCC can tolerate this variant:
long long ret;
switch (sizeof(ret)) {
case 1:
asm ("movb $5, %0" : "=q" (ret));
break;
case 8:;
}
Clang, on the other hand, won't accept that because it validates the inline
asm for the '1' case before the optimisation phase where it realises that
it wouldn't have to emit it anyway.
If LLVM (Clang's "back end") fails such as during instruction selection or
register allocation, it cannot provide accurate diagnostics (warnings /
errors) that contain line information, as the AST has been discarded from
memory at that point.
While there have been early discussions about having C/C++ specific
language optimizations in Clang via the use of MLIR, which would enable
such earlier optimizations, such work is not scoped and likely a multi-year
endeavor.
It was discussed to change the asm output constraint for the one byte case
from "=q" to "=r". While it works for 64-bit, it fails on 32-bit. With '=r'
the compiler could fail to chose a register accessible as high/low which is
required for the byte operation. If that happens the assembly will fail.
Use a local temporary variable of type 'unsigned char' as output for the
byte copy inline asm and then assign it to the real output variable. This
prevents Clang from failing the semantic analysis in the above case.
The resulting code for the actual one byte copy is not affected as the
temporary variable is optimized out.
[ tglx: Amended changelog ]
Reported-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: David Woodhouse <dwmw2@infradead.org>
Reported-by: Dmitry Golovin <dima@golovin.in>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Dennis Zhou <dennis@kernel.org>
Link: https://bugs.llvm.org/show_bug.cgi?id=33587
Link: https://github.com/ClangBuiltLinux/linux/issues/3
Link: https://github.com/ClangBuiltLinux/linux/issues/194
Link: https://github.com/ClangBuiltLinux/linux/issues/781
Link: https://lore.kernel.org/lkml/20180209161833.4605-1-dwmw2@infradead.org/
Link: https://lore.kernel.org/lkml/CAK8P3a1EBaWdbAEzirFDSgHVJMtWjuNt2HGG8z+vpXeNHwETFQ@mail.gmail.com/
Link: https://lkml.kernel.org/r/20200720204925.3654302-12-ndesaulniers@google.com
Also remove now unused __percpu_mov_op.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Dennis Zhou <dennis@kernel.org>
Link: https://lkml.kernel.org/r/20200720204925.3654302-11-ndesaulniers@google.com
Use __pcpu_size_call_return() to simplify this_cpu_read_stable().
Also remove __bad_percpu_size() which is now unused.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dennis Zhou <dennis@kernel.org>
Link: https://lkml.kernel.org/r/20200720204925.3654302-10-ndesaulniers@google.com
The core percpu macros already have a switch on the data size, so the switch
in the x86 code is redundant and produces more dead code.
Also use appropriate types for the width of the instructions. This avoids
errors when compiling with Clang.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dennis Zhou <dennis@kernel.org>
Link: https://lkml.kernel.org/r/20200720204925.3654302-9-ndesaulniers@google.com
The core percpu macros already have a switch on the data size, so the switch
in the x86 code is redundant and produces more dead code.
Also use appropriate types for the width of the instructions. This avoids
errors when compiling with Clang.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dennis Zhou <dennis@kernel.org>
Link: https://lkml.kernel.org/r/20200720204925.3654302-8-ndesaulniers@google.com
The core percpu macros already have a switch on the data size, so the switch
in the x86 code is redundant and produces more dead code.
Also use appropriate types for the width of the instructions. This avoids
errors when compiling with Clang.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dennis Zhou <dennis@kernel.org>
Link: https://lkml.kernel.org/r/20200720204925.3654302-7-ndesaulniers@google.com
The "e" constraint represents a constant, but the XADD instruction doesn't
accept immediate operands.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dennis Zhou <dennis@kernel.org>
Link: https://lkml.kernel.org/r/20200720204925.3654302-6-ndesaulniers@google.com
The core percpu macros already have a switch on the data size, so the switch
in the x86 code is redundant and produces more dead code.
Also use appropriate types for the width of the instructions. This avoids
errors when compiling with Clang.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dennis Zhou <dennis@kernel.org>
Link: https://lkml.kernel.org/r/20200720204925.3654302-5-ndesaulniers@google.com
The core percpu macros already have a switch on the data size, so the switch
in the x86 code is redundant and produces more dead code.
Also use appropriate types for the width of the instructions. This avoids
errors when compiling with Clang.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dennis Zhou <dennis@kernel.org>
Link: https://lkml.kernel.org/r/20200720204925.3654302-4-ndesaulniers@google.com
The core percpu macros already have a switch on the data size, so the switch
in the x86 code is redundant and produces more dead code.
Also use appropriate types for the width of the instructions. This avoids
errors when compiling with Clang.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dennis Zhou <dennis@kernel.org>
Link: https://lkml.kernel.org/r/20200720204925.3654302-3-ndesaulniers@google.com
In preparation for cleaning up the percpu operations, define macros for
abstraction based on the width of the operation.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dennis Zhou <dennis@kernel.org>
Link: https://lkml.kernel.org/r/20200720204925.3654302-2-ndesaulniers@google.com
The clang integrated assembler complains about movzxw:
arch/x86/crypto/crc32c-pcl-intel-asm_64.S:173:2: error: invalid instruction mnemonic 'movzxw'
It seems that movzwq is the mnemonic that it expects instead,
and this is what objdump prints when disassembling the file.
Fixes: 6a8ce1ef39 ("crypto: crc32c - Optimize CRC32C calculation with PCLMULQDQ instruction")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit 711419e504 ("irqdomain: Add the missing assignment of
domain->fwnode for named fwnode") unintentionally caused a dangling pointer
page fault issue on firmware nodes that were freed after IRQ domain
allocation. Commit e3beca48a4 fixed that dangling pointer issue by only
freeing the firmware node after an IRQ domain allocation failure. That fix
no longer frees the firmware node immediately, but leaves the firmware node
allocated after the domain is removed.
The firmware node must be kept around through irq_domain_remove, but should be
freed it afterwards.
Add the missing free operations after domain removal where where appropriate.
Fixes: e3beca48a4 ("irqdomain/treewide: Keep firmware node unconditionally allocated")
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # drivers/pci
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1595363169-7157-1-git-send-email-jonathan.derrick@intel.com
show_trace_log_lvl() provides x86 platform-specific way to unwind
backtrace with a given log level. Unfortunately, registers dump(s) are
not printed with the same log level - instead, KERN_DEFAULT is always
used.
Arista's switches uses quite common setup with rsyslog, where only
urgent messages goes to console (console_log_level=KERN_ERR), everything
else goes into /var/log/ as the console baud-rate often is indecently
slow (9600 bps).
Backtrace dumps without registers printed have proven to be as useful as
morning standups. Furthermore, in order to introduce KERN_UNSUPPRESSED
(which I believe is still the most elegant way to fix raciness of sysrq[1])
the log level should be passed down the stack to register dumping
functions. Besides, there is a potential use-case for printing traces
with KERN_DEBUG level [2] (where registers dump shouldn't appear with
higher log level).
After all preparations are done, provide log_lvl parameter for
show_regs_if_on_stack() and wire up to actual log level used as
an argument for show_trace_log_lvl().
[1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/
[2]: https://lore.kernel.org/linux-doc/20190724170249.9644-1-dima@arista.com/
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Petr Mladek <pmladek@suse.com>
Link: https://lkml.kernel.org/r/20200629144847.492794-4-dima@arista.com
show_trace_log_lvl() provides x86 platform-specific way to unwind
backtrace with a given log level. Unfortunately, registers dump(s) are
not printed with the same log level - instead, KERN_DEFAULT is always
used.
Arista's switches uses quite common setup with rsyslog, where only
urgent messages goes to console (console_log_level=KERN_ERR), everything
else goes into /var/log/ as the console baud-rate often is indecently
slow (9600 bps).
Backtrace dumps without registers printed have proven to be as useful as
morning standups. Furthermore, in order to introduce KERN_UNSUPPRESSED
(which I believe is still the most elegant way to fix raciness of sysrq[1])
the log level should be passed down the stack to register dumping
functions. Besides, there is a potential use-case for printing traces
with KERN_DEBUG level [2] (where registers dump shouldn't appear with
higher log level).
Add log_lvl parameter to __show_regs().
Keep the used log level intact to separate visible change.
[1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/
[2]: https://lore.kernel.org/linux-doc/20190724170249.9644-1-dima@arista.com/
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Petr Mladek <pmladek@suse.com>
Link: https://lkml.kernel.org/r/20200629144847.492794-3-dima@arista.com
show_trace_log_lvl() provides x86 platform-specific way to unwind
backtrace with a given log level. Unfortunately, registers dump(s) are
not printed with the same log level - instead, KERN_DEFAULT is always
used.
Arista's switches uses quite common setup with rsyslog, where only
urgent messages goes to console (console_log_level=KERN_ERR), everything
else goes into /var/log/ as the console baud-rate often is indecently
slow (9600 bps).
Backtrace dumps without registers printed have proven to be as useful as
morning standups. Furthermore, in order to introduce KERN_UNSUPPRESSED
(which I believe is still the most elegant way to fix raciness of sysrq[1])
the log level should be passed down the stack to register dumping
functions. Besides, there is a potential use-case for printing traces
with KERN_DEBUG level [2] (where registers dump shouldn't appear with
higher log level).
Add log_lvl parameter to show_iret_regs() as a preparation to add it
to __show_regs() and show_regs_if_on_stack().
[1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/
[2]: https://lore.kernel.org/linux-doc/20190724170249.9644-1-dima@arista.com/
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Petr Mladek <pmladek@suse.com>
Link: https://lkml.kernel.org/r/20200629144847.492794-2-dima@arista.com
H.J. reported that post 5.7 a segfault of a user space task does not longer
dump the Code bytes when /proc/sys/debug/exception-trace is enabled. It
prints 'Code: Bad RIP value.' instead.
This was broken by a recent change which made probe_kernel_read() reject
non-kernel addresses.
Update show_opcodes() so it retrieves user space opcodes via
copy_from_user_nmi().
Fixes: 98a23609b1 ("maccess: always use strict semantics for probe_kernel_read")
Reported-by: H.J. Lu <hjl.tools@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/87h7tz306w.fsf@nanos.tec.linutronix.de
If a user task's stack is empty, or if it only has user regs, ORC
reports it as a reliable empty stack. But arch_stack_walk_reliable()
incorrectly treats it as unreliable.
That happens because the only success path for user tasks is inside the
loop, which only iterates on non-empty stacks. Generally, a user task
must end in a user regs frame, but an empty stack is an exception to
that rule.
Thanks to commit 71c9582528 ("x86/unwind/orc: Fix error handling in
__unwind_start()"), unwind_start() now sets state->error appropriately.
So now for both ORC and FP unwinders, unwind_done() and !unwind_error()
always means the end of the stack was successfully reached. So the
success path for kthreads is no longer needed -- it can also be used for
empty user tasks.
Reported-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Link: https://lkml.kernel.org/r/f136a4e5f019219cbc4f4da33b30c2f44fa65b84.1594994374.git.jpoimboe@redhat.com
The ORC unwinder fails to unwind newly forked tasks which haven't yet
run on the CPU. It correctly reads the 'ret_from_fork' instruction
pointer from the stack, but it incorrectly interprets that value as a
call stack address rather than a "signal" one, so the address gets
incorrectly decremented in the call to orc_find(), resulting in bad ORC
data.
Fix it by forcing 'ret_from_fork' frames to be signal frames.
Reported-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Link: https://lkml.kernel.org/r/f91a8778dde8aae7f71884b5df2b16d552040441.1594994374.git.jpoimboe@redhat.com
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAl8VlckACgkQCF8+vY7k
4RWg9RAAhmGk/mYYAIAy6o2G8CPgcNnLrUuhXD+SyYrM25QlkinMjHXVhWiPo0F8
DKq21vXg0qlOe7kwn0vSEQ7tClAuJhK/ERnLnDFWe36lO6QF5ydllzEg9XS+xVq2
4Ur+jdkllaS8j7sjQrEdQF17HW52Sr0WB8KegoeUXfeKcGaIBmB+kfNstK2fWMa+
yuVITK/YNpr53zwwsHlMvmIndui0DJHKGGWuTknZsoQfWJtO62YW50FmkizjqXIt
+4DCRiq9Juc/MPYotP2pArwBFiqSl/uP0MeWqn4YzPXvhhhoGPTAhskBWDmZD8jT
XI9Q9Uj5x5kCtTLx4CI3mG2X2XrZ+GqFKZhVD0WKnZN2skdHRn/3qn6tHm7O/Rtr
s27MVKae5zSQs1XrCXwlEz03T5wZ1y1FCX3dlXGkQqbOQLQGbZTsE8wybPElzkLR
18e8xTA1Ss7tUYf7qcrEmMk242byXP8F43cStaWCwsbJgddBpV2jFFfxan3/j6q9
Kl6Y/ssRn6OrIy1UNpdCClRweLi0U53sFQqM/ZmyUbBXMbT/y+rL6h8Wel8EvFlR
PzisYBI/G0AWHahbdHhS9mzQFAZb9etlAboMvI31bo4Bjpbv9UVkX5dMLxabcbEr
B70EZ7nigg5EMqeBkemz0kD4W68qvQRKHK0d+TYcYSnq0VMmErI=
=/5rQ
-----END PGP SIGNATURE-----
Merge tag 'media/v5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media into master
Pull media fixes from Mauro Carvalho Chehab:
"A series of fixes for the upcoming atomisp driver. They solve issues
when probing atomisp on devices with multiple cameras and get rid of
warnings when built with W=1.
The diffstat is a bit long, as this driver has several abstractions.
The patches that solved the issues with W=1 had to get rid of some
duplicated code (there used to have 2 versions of the same code, one
for ISP2401 and another one for ISP2400).
As this driver is not in 5.7, such changes won't cause regressions"
* tag 'media/v5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (38 commits)
Revert "media: atomisp: keep the ISP powered on when setting it"
media: atomisp: fix mask and shift operation on ISPSSPM0
media: atomisp: move system_local consts into a C file
media: atomisp: get rid of version-specific system_local.h
media: atomisp: move global stuff into a common header
media: atomisp: remove non-used 32-bits consts at system_local
media: atomisp: get rid of some unused static vars
media: atomisp: Fix error code in ov5693_probe()
media: atomisp: Replace trace_printk by pr_info
media: atomisp: Fix __func__ style warnings
media: atomisp: fix help message for ISP2401 selection
media: atomisp: i2c: atomisp-ov2680.c: fixed a brace coding style issue.
media: atomisp: make const arrays static, makes object smaller
media: atomisp: Clean up non-existing folders from Makefile
media: atomisp: Get rid of ACPI specifics in gmin_subdev_add()
media: atomisp: Provide Gmin subdev as parameter to gmin_subdev_add()
media: atomisp: Use temporary variable for device in gmin_subdev_add()
media: atomisp: Refactor PMIC detection to a separate function
media: atomisp: Deduplicate return ret in gmin_i2c_write()
media: atomisp: Make pointer to PMIC client global
...
On x86-32 the idt_table with 256 entries needs only 2048 bytes. It is
page-aligned, but the end of the .bss..page_aligned section is not
guaranteed to be page-aligned.
As a result, objects from other .bss sections may end up on the same 4k
page as the idt_table, and will accidentially get mapped read-only during
boot, causing unexpected page-faults when the kernel writes to them.
This could be worked around by making the objects in the page aligned
sections page sized, but that's wrong.
Explicit sections which store only page aligned objects have an implicit
guarantee that the object is alone in the page in which it is placed. That
works for all objects except the last one. That's inconsistent.
Enforcing page sized objects for these sections would wreckage memory
sanitizers, because the object becomes artificially larger than it should
be and out of bound access becomes legit.
Align the end of the .bss..page_aligned and .data..page_aligned section on
page-size so all objects places in these sections are guaranteed to have
their own page.
[ tglx: Amended changelog ]
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200721093448.10417-1-joro@8bytes.org
To allow the kernel not to play games with set_fs to call exec
implement kernel_execve. The function kernel_execve takes pointers
into kernel memory and copies the values pointed to onto the new
userspace stack.
The calls with arguments from kernel space of do_execve are replaced
with calls to kernel_execve.
The calls do_execve and do_execveat are made static as there are now
no callers outside of exec.
The comments that mention do_execve are updated to refer to
kernel_execve or execve depending on the circumstances. In addition
to correcting the comments, this makes it easy to grep for do_execve
and verify it is not used.
Inspired-by: https://lkml.kernel.org/r/20200627072704.2447163-1-hch@lst.de
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/87wo365ikj.fsf@x220.int.ebiederm.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Now that the ->compat_{get,set}sockopt proto_ops methods are gone
there is no good reason left to keep the compat syscalls separate.
This fixes the odd use of unsigned int for the compat_setsockopt
optlen and the missing sock_use_custom_sol_socket.
It would also easily allow running the eBPF hooks for the compat
syscalls, but such a large change in behavior does not belong into
a consolidation patch like this one.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
This fixes a regression encountered while running the
gdb.base/corefile.exp test in GDB's test suite.
In my testing, the typo prevented the sw_reserved field of struct
fxregs_state from being output to the kernel XSAVES area. Thus the
correct mask corresponding to XCR0 was not present in the core file for
GDB to interrogate, resulting in the following behavior:
[kev@f32-1 gdb]$ ./gdb -q testsuite/outputs/gdb.base/corefile/corefile testsuite/outputs/gdb.base/corefile/corefile.core
Reading symbols from testsuite/outputs/gdb.base/corefile/corefile...
[New LWP 232880]
warning: Unexpected size of section `.reg-xstate/232880' in core file.
With the typo fixed, the test works again as expected.
Signed-off-by: Kevin Buettner <kevinb@redhat.com>
Fixes: 9e46365459 ("copy_xstate_to_kernel(): don't leave parts of destination uninitialized")
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dave Airlie <airlied@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Fix the I/O bitmap invalidation on XEN PV, which was overlooked in the
recent ioperm/iopl rework. This caused the TSS and XEN's I/O bitmap to
get out of sync.
- Use the proper vectors for HYPERV.
- Make disabling of stack protector for the entry code work with GCC
builds which enable stack protector by default. Removing the option is
not sufficient, it needs an explicit -fno-stack-protector to shut it
off.
- Mark check_user_regs() noinstr as it is called from noinstr code. The
missing annotation causes it to be placed in the text section which
makes it instrumentable.
- Add the missing interrupt disable in exc_alignment_check()
- Fixup a XEN_PV build dependency in the 32bit entry code
- A few fixes to make the Clang integrated assembler happy
- Move EFI stub build to the right place for out of tree builds
- Make prepare_exit_to_usermode() static. It's not longer called from ASM
code.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl8UR+MTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoQCUD/4/9W5FFvdZvQPwmXsHPaVnW9hUsXxG
0tjc34xqDcgEl1U3khu+6jj+oHx+JM+4wGP/V49Wqx6xkrJ33/a8uYErAgI7+Pmp
s3T2gXMWkgJtYFlDQdAMbeuuM2cOFZJw4BxxvTMth5EixQvk1EkX6QyBjLaSGo8y
78sWtZ6Oh5Ql9ua/9TOilewLsCsQSFIFn0o/hawwwPUMrwGvD29scha0XHom+AO7
uwejfU8klq2HJJaLaaiUaiNBkFz0TNGJtY+3mQpw8BPjCuuBQhYygrS0X4uQzo01
4XJzhDnOVbAYWqi0/T+mAEmuJ9NBZJwYiYrwBYCkZgELwJKLzhzO2GOgP9xEsFY4
VUNgqHFhKrQp10k2k4L/A5tmr+0GntiCQhdZi+/gty6oO/t3ni57pRcAhA9qBNOb
8ZqumBwgaaAIqcmdtoyXAIveWOHnzwKEg6wmIGFbyCwHjeLJKJG7KhpXIpEuX+j2
DC7EfYvRB+jllAk1CBypBvzD0DHfMZ0myPxCcZiW2wHTVAlkpY7hiIyPHqocjE9L
OjOQ7FS6E2/p24lYVcLUFWcESxGFvQjjxwXk7htjpGUIZsQOhz/LOW+CIPCsfbqE
HoEsHmNltksYYV9FDfevXRp5sbxpx3wQSLOgqNqiOpy4cTCG8boalUqHQ0OsN8Oa
EgU067yF77ymRg==
=QAeH
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master
Pull x86 fixes from Thomas Gleixner:
"A pile of fixes for x86:
- Fix the I/O bitmap invalidation on XEN PV, which was overlooked in
the recent ioperm/iopl rework. This caused the TSS and XEN's I/O
bitmap to get out of sync.
- Use the proper vectors for HYPERV.
- Make disabling of stack protector for the entry code work with GCC
builds which enable stack protector by default. Removing the option
is not sufficient, it needs an explicit -fno-stack-protector to
shut it off.
- Mark check_user_regs() noinstr as it is called from noinstr code.
The missing annotation causes it to be placed in the text section
which makes it instrumentable.
- Add the missing interrupt disable in exc_alignment_check()
- Fixup a XEN_PV build dependency in the 32bit entry code
- A few fixes to make the Clang integrated assembler happy
- Move EFI stub build to the right place for out of tree builds
- Make prepare_exit_to_usermode() static. It's not longer called from
ASM code"
* tag 'x86-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Don't add the EFI stub to targets
x86/entry: Actually disable stack protector
x86/ioperm: Fix io bitmap invalidation on Xen PV
x86: math-emu: Fix up 'cmp' insn for clang ias
x86/entry: Fix vectors to IDTENTRY_SYSVEC for CONFIG_HYPERV
x86/entry: Add compatibility with IAS
x86/entry/common: Make prepare_exit_to_usermode() static
x86/entry: Mark check_user_regs() noinstr
x86/traps: Disable interrupts in exc_aligment_check()
x86/entry/32: Fix XEN_PV build dependency
- Make the handling of the firmware node consistent and do not free the
node after the domain has been created successfully. The core code
stores a pointer to it which can lead to a use after free or double
free.
This used to "work" because the pointer was not stored when the initial
code was written, but at some point later it was required to store
it. Of course nobody noticed that the existing users break that way.
- Handle affinity setting on inactive interrupts correctly when
hierarchical irq domains are enabled. When interrupts are inactive with
the modern hierarchical irqdomain design, the interrupt chips are not
necessarily in a state where affinity changes can be handled. The legacy
irq chip design allowed this because interrupts are immediately fully
initialized at allocation time. X86 has a hacky workaround for this, but
other implementations do not. This cased malfunction on GIC-V3. Instead
of playing whack a mole to find all affected drivers, change the core
code to store the requested affinity setting and then establish it when
the interrupt is allocated, which makes the X86 hack go away.
-----BEGIN PGP SIGNATURE-----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=elM3
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master
Pull irq fixes from Thomas Gleixner:
"Two fixes for the interrupt subsystem:
- Make the handling of the firmware node consistent and do not free
the node after the domain has been created successfully. The core
code stores a pointer to it which can lead to a use after free or
double free.
This used to "work" because the pointer was not stored when the
initial code was written, but at some point later it was required
to store it. Of course nobody noticed that the existing users break
that way.
- Handle affinity setting on inactive interrupts correctly when
hierarchical irq domains are enabled.
When interrupts are inactive with the modern hierarchical irqdomain
design, the interrupt chips are not necessarily in a state where
affinity changes can be handled. The legacy irq chip design allowed
this because interrupts are immediately fully initialized at
allocation time. X86 has a hacky workaround for this, but other
implementations do not.
This cased malfunction on GIC-V3. Instead of playing whack a mole
to find all affected drivers, change the core code to store the
requested affinity setting and then establish it when the interrupt
is allocated, which makes the X86 hack go away"
* tag 'irq-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/affinity: Handle affinity setting on inactive interrupts correctly
irqdomain/treewide: Keep firmware node unconditionally allocated
vmlinux-objs-y is added to targets, which currently means that the EFI
stub gets added to the targets as well. It shouldn't be added since it
is built elsewhere.
This confuses Makefile.build which interprets the EFI stub as a target
$(obj)/$(objtree)/drivers/firmware/efi/libstub/lib.a
and will create drivers/firmware/efi/libstub/ underneath
arch/x86/boot/compressed, to hold this supposed target, if building
out-of-tree. [0]
Fix this by pulling the stub out of vmlinux-objs-y into efi-obj-y.
[0] See scripts/Makefile.build near the end:
# Create directories for object files if they do not exist
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lkml.kernel.org/r/20200715032631.1562882-1-nivedita@alum.mit.edu
Some builds of GCC enable stack protector by default. Simply removing
the arguments is not sufficient to disable stack protector, as the stack
protector for those GCC builds must be explicitly disabled. Remove the
argument removals and add -fno-stack-protector. Additionally include
missed x32 argument updates, and adjust whitespace for readability.
Fixes: 20355e5f73 ("x86/entry: Exclude low level entry code from sanitizing")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/202006261333.585319CA6B@keescook
Avoid the overhead of the dma ops support for tiny builds that only
use the direct mapping.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
tss_invalidate_io_bitmap() wasn't wired up properly through the pvop
machinery, so the TSS and Xen's io bitmap would get out of sync
whenever disabling a valid io bitmap.
Add a new pvop for tss_invalidate_io_bitmap() to fix it.
This is XSA-329.
Fixes: 22fe5b0439 ("x86/ioperm: Move TSS bitmap update to exit to user work")
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/d53075590e1f91c19f8af705059d3ff99424c020.1595030016.git.luto@kernel.org
IOSF MBI header contains a lot of definitions, such as
end point addresses of IPs. Move CCK address from AtomISP driver
to generic header.
While here, drop unused one.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Setting interrupt affinity on inactive interrupts is inconsistent when
hierarchical irq domains are enabled. The core code should just store the
affinity and not call into the irq chip driver for inactive interrupts
because the chip drivers may not be in a state to handle such requests.
X86 has a hacky workaround for that but all other irq chips have not which
causes problems e.g. on GIC V3 ITS.
Instead of adding more ugly hacks all over the place, solve the problem in
the core code. If the affinity is set on an inactive interrupt then:
- Store it in the irq descriptors affinity mask
- Update the effective affinity to reflect that so user space has
a consistent view
- Don't call into the irq chip driver
This is the core equivalent of the X86 workaround and works correctly
because the affinity setting is established in the irq chip when the
interrupt is activated later on.
Note, that this is only effective when hierarchical irq domains are enabled
by the architecture. Doing it unconditionally would break legacy irq chip
implementations.
For hierarchial irq domains this works correctly as none of the drivers can
have a dependency on affinity setting in inactive state by design.
Remove the X86 workaround as it is not longer required.
Fixes: 02edee152d ("x86/apic/vector: Ignore set_affinity call for inactive interrupts")
Reported-by: Ali Saidi <alisaidi@amazon.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Ali Saidi <alisaidi@amazon.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200529015501.15771-1-alisaidi@amazon.com
Link: https://lkml.kernel.org/r/877dv2rv25.fsf@nanos.tec.linutronix.de
With UV1 support removed, EFI_UV1_MEMMAP is no longer used.
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lkml.kernel.org/r/20200713212956.019149227@hpe.com
With UV1 removed, EFI_UV1_MEMMAP is not longer used. Remove the code used
by it and the related code in EFI.
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lkml.kernel.org/r/20200713212955.902592618@hpe.com
In removing UV1 support, efi_have_uv1_memmap is no longer used.
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lkml.kernel.org/r/20200713212955.786177105@hpe.com
As a part of UV1 platform removal, don't try to recognize the platform
through DMI to set the EFI_UV1_MEMMAP bit.
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lkml.kernel.org/r/20200713212955.667726896@hpe.com
As a part of UV1 platform removal, delete the efi=old_map option,
which is not longer needed.
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lkml.kernel.org/r/20200713212955.552098718@hpe.com
Using uninitialized_var() is dangerous as it papers over real bugs[1]
(or can in the future), and suppresses unrelated compiler warnings
(e.g. "unused variable"). If the compiler thinks it is uninitialized,
either simply initialize the variable or make compiler changes.
In preparation for removing[2] the[3] macro[4], remove all remaining
needless uses with the following script:
git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \
xargs perl -pi -e \
's/\buninitialized_var\(([^\)]+)\)/\1/g;
s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;'
drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid
pathological white-space.
No outstanding warnings were found building allmodconfig with GCC 9.3.0
for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64,
alpha, and m68k.
[1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/
[2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/
[3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/
[4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/
Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5
Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB
Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers
Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs
Signed-off-by: Kees Cook <keescook@chromium.org>
The clang integrated assembler requires the 'cmp' instruction to
have a length prefix here:
arch/x86/math-emu/wm_sqrt.S:212:2: error: ambiguous instructions require an explicit suffix (could be 'cmpb', 'cmpw', or 'cmpl')
cmp $0xffffffff,-24(%ebp)
^
Make this a 32-bit comparison, which it was clearly meant to be.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lkml.kernel.org/r/20200527135352.1198078-1-arnd@arndb.de
When assembling with Clang via `make LLVM_IAS=1` and CONFIG_HYPERV enabled,
we observe the following error:
<instantiation>:9:6: error: expected absolute expression
.if HYPERVISOR_REENLIGHTENMENT_VECTOR == 3
^
<instantiation>:1:1: note: while in macro instantiation
idtentry HYPERVISOR_REENLIGHTENMENT_VECTOR asm_sysvec_hyperv_reenlightenment sysvec_hyperv_reenlightenment has_error_code=0
^
./arch/x86/include/asm/idtentry.h:627:1: note: while in macro instantiation
idtentry_sysvec HYPERVISOR_REENLIGHTENMENT_VECTOR sysvec_hyperv_reenlightenment;
^
<instantiation>:9:6: error: expected absolute expression
.if HYPERVISOR_STIMER0_VECTOR == 3
^
<instantiation>:1:1: note: while in macro instantiation
idtentry HYPERVISOR_STIMER0_VECTOR asm_sysvec_hyperv_stimer0 sysvec_hyperv_stimer0 has_error_code=0
^
./arch/x86/include/asm/idtentry.h:628:1: note: while in macro instantiation
idtentry_sysvec HYPERVISOR_STIMER0_VECTOR sysvec_hyperv_stimer0;
This is caused by typos in arch/x86/include/asm/idtentry.h:
HYPERVISOR_REENLIGHTENMENT_VECTOR -> HYPERV_REENLIGHTENMENT_VECTOR
HYPERVISOR_STIMER0_VECTOR -> HYPERV_STIMER0_VECTOR
For more details see ClangBuiltLinux issue #1088.
Fixes: a16be368dd ("x86/entry: Convert various hypervisor vectors to IDTENTRY_SYSVEC")
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1088
Link: https://github.com/ClangBuiltLinux/linux/issues/1043
Link: https://lore.kernel.org/patchwork/patch/1272115/
Link: https://lkml.kernel.org/r/20200714194740.4548-1-sedat.dilek@gmail.com
Clang's integrated assembler does not allow symbols with non-absolute
values to be reassigned. Modify the interrupt entry loop macro to be
compatible with IAS by using a label and an offset.
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Suggested-by: Brian Gerst <brgerst@gmail.com>
Suggested-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Jian Cai <caij2003@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> #
Link: https://github.com/ClangBuiltLinux/linux/issues/1043
Link: https://lkml.kernel.org/r/20200714233024.1789985-1-caij2003@gmail.com
Current minimum required version of binutils is 2.23,
which supports PSHUFB, PCLMULQDQ, PEXTRD, AESKEYGENASSIST,
AESIMC, AESENC, AESENCLAST, AESDEC, AESDECLAST and MOVQ
instruction mnemonics.
Substitute macros from include/asm/inst.h with a proper
instruction mnemonics in various assmbly files from
x86/crypto directory, and remove now unneeded file.
The patch was tested by calculating and comparing sha256sum
hashes of stripped object files before and after the patch,
to be sure that executable code didn't change.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
CC: Herbert Xu <herbert@gondor.apana.org.au>
CC: "David S. Miller" <davem@davemloft.net>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Ingo Molnar <mingo@redhat.com>
CC: Borislav Petkov <bp@alien8.de>
CC: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Due to the fact that the x86 port does not support allocating objects
on the stack with an alignment that exceeds 8 bytes, we have a rather
ugly hack in the x86 code for ChaCha to ensure that the state array is
aligned to 16 bytes, allowing the SSE3 implementation of the algorithm
to use aligned loads.
Given that the performance benefit of using of aligned loads appears to
be limited (~0.25% for 1k blocks using tcrypt on a Corei7-8650U), and
the fact that this hack has leaked into generic ChaCha code, let's just
remove it.
Cc: Martin Willi <martin@strongswan.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Martin Willi <martin@strongswan.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stack switching for interrupt handlers happens in C now for both 64 and
32bit. Remove the stale comment which claims the contrary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Quite some non OF/ACPI users of irqdomains allocate firmware nodes of type
IRQCHIP_FWNODE_NAMED or IRQCHIP_FWNODE_NAMED_ID and free them right after
creating the irqdomain. The only purpose of these FW nodes is to convey
name information. When this was introduced the core code did not store the
pointer to the node in the irqdomain. A recent change stored the firmware
node pointer in irqdomain for other reasons and missed to notice that the
usage sites which do the alloc_fwnode/create_domain/free_fwnode sequence
are broken by this. Storing a dangling pointer is dangerous itself, but in
case that the domain is destroyed later on this leads to a double free.
Remove the freeing of the firmware node after creating the irqdomain from
all affected call sites to cure this.
Fixes: 711419e504 ("irqdomain: Add the missing assignment of domain->fwnode for named fwnode")
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/873661qakd.fsf@nanos.tec.linutronix.de
The "if" that drops the present bit from the page structure fauls makes no sense.
It was added by yours truly in order to be bug-compatible with pre-existing code
and in order to make the tests pass; however, the tests are wrong. The behavior
after this patch matches bare metal.
Reported-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds a new capability KVM_CAP_SMALLER_MAXPHYADDR which
allows userspace to query if the underlying architecture would
support GUEST_MAXPHYADDR < HOST_MAXPHYADDR and hence act accordingly
(e.g. qemu can decide if it should warn for -cpu ..,phys-bits=X)
The complications in this patch are due to unexpected (but documented)
behaviour we see with NPF vmexit handling in AMD processor. If
SVM is modified to add guest physical address checks in the NPF
and guest #PF paths, we see the followning error multiple times in
the 'access' test in kvm-unit-tests:
test pte.p pte.36 pde.p: FAIL: pte 2000021 expected 2000001
Dump mapping: address: 0x123400000000
------L4: 24c3027
------L3: 24c4027
------L2: 24c5021
------L1: 1002000021
This is because the PTE's accessed bit is set by the CPU hardware before
the NPF vmexit. This is handled completely by hardware and cannot be fixed
in software.
Therefore, availability of the new capability depends on a boolean variable
allow_smaller_maxphyaddr which is set individually by VMX and SVM init
routines. On VMX it's always set to true, on SVM it's only set to true
when NPT is not enabled.
CC: Tom Lendacky <thomas.lendacky@amd.com>
CC: Babu Moger <babu.moger@amd.com>
Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
Message-Id: <20200710154811.418214-10-mgamal@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ignore non-present page faults, since those cannot have reserved
bits set.
When running access.flat with "-cpu Haswell,phys-bits=36", the
number of trapped page faults goes down from 8872644 to 3978948.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200710154811.418214-9-mgamal@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check guest physical address against its maximum, which depends on the
guest MAXPHYADDR. If the guest's physical address exceeds the
maximum (i.e. has reserved bits set), inject a guest page fault with
PFERR_RSVD_MASK set.
This has to be done both in the EPT violation and page fault paths, as
there are complications in both cases with respect to the computation
of the correct error code.
For EPT violations, unfortunately the only possibility is to emulate,
because the access type in the exit qualification might refer to an
access to a paging structure, rather than to the access performed by
the program.
Trapping page faults instead is needed in order to correct the error code,
but the access type can be obtained from the original error code and
passed to gva_to_gpa. The corrections required in the error code are
subtle. For example, imagine that a PTE for a supervisor page has a reserved
bit set. On a supervisor-mode access, the EPT violation path would trigger.
However, on a user-mode access, the processor will not notice the reserved
bit and not include PFERR_RSVD_MASK in the error code.
Co-developed-by: Mohammed Gamal <mgamal@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200710154811.418214-8-mgamal@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200710154811.418214-7-mgamal@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow vendor code to observe changes to MAXPHYADDR and start/stop
intercepting page faults.
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We would like to introduce a callback to update the #PF intercept
when CPUID changes. Just reuse update_bp_intercept since VMX is
already using update_exception_bitmap instead of a bespoke function.
While at it, remove an unnecessary assignment in the SVM version,
which is already done in the caller (kvm_arch_vcpu_ioctl_set_guest_debug)
and has nothing to do with the exception bitmap.
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Intel processors of various generations have supported 36, 39, 46 or 52
bits for physical addresses. Until IceLake introduced MAXPHYADDR==52,
running on a machine with higher MAXPHYADDR than the guest more or less
worked, because software that relied on reserved address bits (like KVM)
generally used bit 51 as a marker and therefore the page faults where
generated anyway.
Unfortunately this is not true anymore if the host MAXPHYADDR is 52,
and this can cause problems when migrating from a MAXPHYADDR<52
machine to one with MAXPHYADDR==52. Typically, the latter are machines
that support 5-level page tables, so they can be identified easily from
the LA57 CPUID bit.
When that happens, the guest might have a physical address with reserved
bits set, but the host won't see that and trap it. Hence, we need
to check page faults' physical addresses against the guest's maximum
physical memory and if it's exceeded, we need to add the PFERR_RSVD_MASK
bits to the page fault error code.
This patch does this for the MMU's page walks. The next patches will
ensure that the correct exception and error code is produced whenever
no host-reserved bits are set in page table entries.
Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200710154811.418214-4-mgamal@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Also no point of it being inline since it's always called through
function pointers. So remove that.
Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200710154811.418214-3-mgamal@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds two helper functions that will be used to support virtualizing
MAXPHYADDR in both kvm-intel.ko and kvm.ko.
kvm_fixup_and_inject_pf_error() injects a page fault for a user-specified GVA,
while kvm_mmu_is_illegal_gpa() checks whether a GPA exceeds vCPU address limits.
Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200710154811.418214-2-mgamal@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The mmu_check_root() check in fast_pgd_switch() seems to be
superfluous: when GPA is outside of the visible range
cached_root_available() will fail for non-direct roots
(as we can't have a matching one on the list) and we don't
seem to care for direct ones.
Also, raising #TF immediately when a non-existent GFN is written to CR3
doesn't seem to mach architectural behavior. Drop the check.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200710141157.1640173-10-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make nSVM code resemble nVMX where nested_vmx_load_cr3() is used on
both guest->host and host->guest transitions. Also, we can now
eliminate unconditional kvm_mmu_reset_context() and speed things up.
Note, nVMX has two different paths: load_vmcs12_host_state() and
nested_vmx_restore_host_state() and the later is used to restore from
'partial' switch to L2, it always uses kvm_mmu_reset_context().
nSVM doesn't have this yet. Also, nested_svm_vmexit()'s return value
is almost always ignored nowadays.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200710141157.1640173-9-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Undesired triple fault gets injected to L1 guest on SVM when L2 is
launched with certain CR3 values. #TF is raised by mmu_check_root()
check in fast_pgd_switch() and the root cause is that when
kvm_set_cr3() is called from nested_prepare_vmcb_save() with NPT
enabled CR3 points to a nGPA so we can't check it with
kvm_is_visible_gfn().
Using generic kvm_set_cr3() when switching to nested guest is not
a great idea as we'll have to distinguish between 'real' CR3s and
'nested' CR3s to e.g. not call kvm_mmu_new_pgd() with nGPA. Following
nVMX implement nested-specific nested_svm_load_cr3() doing the job.
To support the change, nested_svm_load_cr3() needs to be re-ordered
with nested_svm_init_mmu_context().
Note: the current implementation is sub-optimal as we always do TLB
flush/MMU sync but this is still an improvement as we at least stop doing
kvm_mmu_reset_context().
Fixes: 7c390d350f ("kvm: x86: Add fast CR3 switch code path")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200710141157.1640173-8-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_mmu_new_pgd() refers to arch.mmu and at this point it still references
arch.guest_mmu while arch.root_mmu is expected.
Note, the change is effectively a nop: when !npt_enabled,
nested_svm_uninit_mmu_context() does nothing (as we don't do
nested_svm_init_mmu_context()) and with npt_enabled we don't
do kvm_set_cr3(). However, it will matter when we move the
call to kvm_mmu_new_pgd into nested_svm_load_cr3().
No functional change intended.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200710141157.1640173-7-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As a preparatory change for implementing nSVM-specific PGD switch
(following nVMX' nested_vmx_load_cr3()), introduce nested_svm_load_cr3()
instead of relying on kvm_set_cr3().
No functional change intended.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200710141157.1640173-6-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some operations in enter_svm_guest_mode() may fail, e.g. currently
we suppress kvm_set_cr3() return value. Prepare the code to proparate
errors.
No functional change intended.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200710141157.1640173-5-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
WARN_ON_ONCE(svm->nested.nested_run_pending) in nested_svm_vmexit()
will fire if nested_run_pending remains '1' but it doesn't really
need to, we are already failing and not going to run nested guest.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200710141157.1640173-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_init_shadow_mmu() was actually the only function that could be called
with different vcpu->arch.mmu values. Now that kvm_init_shadow_npt_mmu()
is separated from kvm_init_shadow_mmu(), we always know the MMU context
we need to use and there is no need to dereference vcpu->arch.mmu pointer.
Based on a patch by Vitaly Kuznetsov <vkuznets@redhat.com>.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200710141157.1640173-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As a preparatory change for moving kvm_mmu_new_pgd() from
nested_prepare_vmcb_save() to nested_svm_init_mmu_context() split
kvm_init_shadow_npt_mmu() from kvm_init_shadow_mmu(). This also makes
the code look more like nVMX (kvm_init_shadow_ept_mmu()).
No functional change intended.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200710141157.1640173-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
state_test/smm_test selftests are failing on AMD with:
"Unexpected result from KVM_GET_MSRS, r: 51 (failed MSR was 0x345)"
MSR_IA32_PERF_CAPABILITIES is an emulated MSR on Intel but it is not
known to AMD code, we can move the emulation to common x86 code. For
AMD, we basically just allow the host to read and write zero to the MSR.
Fixes: 27461da310 ("KVM: x86/pmu: Support full width counting")
Suggested-by: Jim Mattson <jmattson@google.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200710152559.1645827-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl8IQ20UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNzxQf+KziWiVgLYnRmGVJ4xztRGv8Cjt+o
g1YRyJgpST4UEdHyO+T1JvO8HVzTxtDwZlRNHB9UtIaAsAuybSdpUaHeK9lvcZvi
vd59ItmyHKFOtItfG6Qpj6MJKN9tbN1y2F9Vc+TXNLL9BLHwPTbvF3l5ffdtBJ6F
zurQBec7hoCarXZJS2GfzBQ+16WxZmm7RLDpYtEqAayp+UHNw+Z1eMrMV6TwdxAA
3LgDn3l+A+BNuIIUKFF9Y5Ef3T4zBWGbdsV7FR9mH1fq2DiT1Vz4IT674L+6rEom
/KvyyjVPIfQF33sMZmVpLCpoe2IEmOtc7cu3zffqNL6gNw3YHZwMK6cgsg==
=abJa
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull vkm fixes from Paolo Bonzini:
"Two simple but important bugfixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: MIPS: Fix build errors for 32bit kernel
KVM: nVMX: fixes for preemption timer migration
Commit 850448f35a ("KVM: nVMX: Fix VMX preemption timer migration",
2020-06-01) accidentally broke nVMX live migration from older version
by changing the userspace ABI. Restore it and, while at it, ensure
that vmx->nested.has_preemption_timer_deadline is always initialized
according to the KVM_STATE_VMX_PREEMPTION_TIMER_DEADLINE flag.
Cc: Makarand Sonare <makarandsonare@google.com>
Fixes: 850448f35a ("KVM: nVMX: Fix VMX preemption timer migration")
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While the nmi_enter() users did
trace_hardirqs_{off_prepare,on_finish}() there was no matching
lockdep_hardirqs_*() calls to complete the picture.
Introduce idtentry_{enter,exit}_nmi() to enable proper IRQ state
tracking across the NMIs.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200623083721.216740948@infradead.org
Move x86's memory cache helpers to common KVM code so that they can be
reused by arm64 and MIPS in future patches.
Suggested-by: Christoffer Dall <christoffer.dall@arm.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200703023545.8771-16-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move x86's 'struct kvm_mmu_memory_cache' to common code in anticipation
of moving the entire x86 implementation code to common KVM and reusing
it for arm64 and MIPS. Add a new architecture specific asm/kvm_types.h
to control the existence and parameters of the struct. The new header
is needed to avoid a chicken-and-egg problem with asm/kvm_host.h as all
architectures define instances of the struct in their vCPU structs.
Add an asm-generic version of kvm_types.h to avoid having empty files on
PPC and s390 in the long term, and for arm64 and mips in the short term.
Suggested-by: Christoffer Dall <christoffer.dall@arm.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200703023545.8771-15-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename the memory helpers that will soon be moved to common code and be
made globaly available via linux/kvm_host.h. "mmu" alone is not a
sufficient namespace for globally available KVM symbols.
Opportunistically add "nr_" in mmu_memory_cache_free_objects() to make
it clear the function returns the number of free objects, as opposed to
freeing existing objects.
Suggested-by: Christoffer Dall <christoffer.dall@arm.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200703023545.8771-14-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Don't bother filling the gfn array cache when the caller is a fully
direct MMU, i.e. won't need a gfn array for shadow pages.
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200703023545.8771-13-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Set __GFP_ZERO for the shadow page memory cache and drop the explicit
clear_page() from kvm_mmu_get_page(). This moves the cost of zeroing a
page to the allocation time of the physical page, i.e. when topping up
the memory caches, and thus avoids having to zero out an entire page
while holding mmu_lock.
Cc: Peter Feiner <pfeiner@google.com>
Cc: Peter Shier <pshier@google.com>
Cc: Junaid Shahid <junaids@google.com>
Cc: Jim Mattson <jmattson@google.com>
Suggested-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200703023545.8771-12-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a gfp_zero flag to 'struct kvm_mmu_memory_cache' and use it to
control __GFP_ZERO instead of hardcoding a call to kmem_cache_zalloc().
A future patch needs such a flag for the __get_free_page() path, as
gfn arrays do not need/want the allocator to zero the memory. Convert
the kmem_cache paths to __GFP_ZERO now so as to avoid a weird and
inconsistent API in the future.
No functional change intended.
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200703023545.8771-11-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use separate caches for allocating shadow pages versus gfn arrays. This
sets the stage for specifying __GFP_ZERO when allocating shadow pages
without incurring extra cost for gfn arrays.
No functional change intended.
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200703023545.8771-10-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clean up the minimums in mmu_topup_memory_caches() to document the
driving mechanisms behind the minimums. Now that encountering an empty
cache is unlikely to trigger BUG_ON(), it is less dangerous to be more
precise when defining the minimums.
For rmaps, the logic is 1 parent PTE per level, plus a single rmap, and
prefetched rmaps. The extra objects in the current '8 + PREFETCH'
minimum came about due to an abundance of paranoia in commit
c41ef344de ("KVM: MMU: increase per-vcpu rmap cache alloc size"),
i.e. it could have increased the minimum to 2 rmaps. Furthermore, the
unexpected extra rmap case was killed off entirely by commits
f759e2b4c7 ("KVM: MMU: avoid pte_list_desc running out in
kvm_mmu_pte_write") and f5a1e9f895 ("KVM: MMU: remove call to
kvm_mmu_pte_write from walk_addr").
For the so called page cache, replace '8' with 2*PT64_ROOT_MAX_LEVEL.
The 2x multiplier is needed because the cache is used for both shadow
pages and gfn arrays for indirect MMUs.
And finally, for page headers, replace '4' with PT64_ROOT_MAX_LEVEL.
Note, KVM now supports 5-level paging, i.e. the old minimums that used a
baseline derived from 4-level paging were technically wrong. But, KVM
always allocates roots in a separate flow, e.g. it's impossible in the
current implementation to actually need 5 new shadow pages in a single
flow. Use PT64_ROOT_MAX_LEVEL unmodified instead of subtracting 1, as
the direct usage is likely more intuitive to uninformed readers, and the
inflated minimum is unlikely to affect functionality in practice.
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200703023545.8771-9-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Topup memory caches after walking the GVA->GPA translation during a
shadow page fault, there is no need to ensure the caches are full when
walking the GVA. As of commit f5a1e9f895 ("KVM: MMU: remove call
to kvm_mmu_pte_write from walk_addr"), the FNAME(walk_addr) flow no
longer add rmaps via kvm_mmu_pte_write().
This avoids allocating memory in the case that the GVA is unmapped in
the guest, and also provides a paper trail of why/when the memory caches
need to be filled.
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200703023545.8771-8-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Avoid refilling the memory caches and potentially slow reclaim/swap when
handling a fast page fault, which does not need to allocate any new
objects.
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200703023545.8771-7-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Attempt to allocate a new object instead of crashing KVM (and likely the
kernel) if a memory cache is unexpectedly empty. Use GFP_ATOMIC for the
allocation as the caches are used while holding mmu_lock. The immediate
BUG_ON() makes the code unnecessarily explosive and led to confusing
minimums being used in the past, e.g. allocating 4 objects where 1 would
suffice.
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200703023545.8771-6-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Return errors directly from mmu_topup_memory_caches() instead of
branching to a label that does the same.
No functional change intended.
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200703023545.8771-5-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use "mc" for local variables to shorten line lengths and provide
consistent names, which will be especially helpful when some of the
helpers are moved to common KVM code in future patches.
No functional change intended.
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200703023545.8771-4-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the "page" variants of the topup/free memory cache helpers, using
the existence of an associated kmem_cache to select the correct alloc
or free routine.
No functional change intended.
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200703023545.8771-3-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Track the kmem_cache used for non-page KVM MMU memory caches instead of
passing in the associated kmem_cache when filling the cache. This will
allow consolidating code and other cleanups.
No functional change intended.
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200703023545.8771-2-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
read/write_cr2() go throuh the paravirt XXL indirection, but nested VMX in
a XEN_PV guest is not supported.
Use the native variants.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Message-Id: <20200708195322.344731916@linutronix.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On guest exit MSR_GS_BASE contains whatever the guest wrote to it and the
first action after returning from the ASM code is to set it to the host
kernel value. This uses wrmsrl() which is interesting at least.
wrmsrl() is either using native_write_msr() or the paravirt variant. The
XEN_PV code is uninteresting as nested SVM in a XEN_PV guest does not work.
But native_write_msr() can be placed out of line by the compiler especially
when paravirtualization is enabled in the kernel configuration. The
function is marked notrace, but still can be probed if
CONFIG_KPROBE_EVENTS_ON_NOTRACE is enabled.
That would be a fatal problem as kprobe events use per-CPU variables which
are GS based and would be accessed with the guest GS. Depending on the GS
value this would either explode in colorful ways or lead to completely
undebugable data corruption.
Aside of that native_write_msr() contains a tracepoint which objtool
complains about as it is invoked from the noinstr section.
As this cannot run inside a XEN_PV guest there is no point in using
wrmsrl(). Use native_wrmsrl() instead which is just a plain native WRMSR
without tracing or anything else attached.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Juergen Gross <jgross@suse.com>
Message-Id: <20200708195322.244847377@linutronix.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the functions which are inside the RCU off region into the
non-instrumentable text section.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200708195322.144607767@linutronix.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the functions which are inside the RCU off region into the
non-instrumentable text section.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200708195322.037311579@linutronix.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Entering guest mode is more or less the same as returning to user
space. From an instrumentation point of view both leave kernel mode and the
transition to guest or user mode reenables interrupts on the host. In user
mode an interrupt is served directly and in guest mode it causes a VM exit
which then handles or reinjects the interrupt.
The transition from guest mode or user mode to kernel mode disables
interrupts, which needs to be recorded in instrumentation to set the
correct state again.
This is important for e.g. latency analysis because otherwise the execution
time in guest or user mode would be wrongly accounted as interrupt disabled
and could trigger false positives.
Add hardirq tracing to guest enter/exit functions in the same way as it
is done in the user mode enter/exit code, respecting the RCU requirements.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200708195321.934715094@linutronix.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Entering guest mode is more or less the same as returning to user
space. From an instrumentation point of view both leave kernel mode and the
transition to guest or user mode reenables interrupts on the host. In user
mode an interrupt is served directly and in guest mode it causes a VM exit
which then handles or reinjects the interrupt.
The transition from guest mode or user mode to kernel mode disables
interrupts, which needs to be recorded in instrumentation to set the
correct state again.
This is important for e.g. latency analysis because otherwise the execution
time in guest or user mode would be wrongly accounted as interrupt disabled
and could trigger false positives.
Add hardirq tracing to guest enter/exit functions in the same way as it
is done in the user mode enter/exit code, respecting the RCU requirements.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200708195321.822002354@linutronix.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Context tracking for KVM happens way too early in the vcpu_run()
code. Anything after guest_enter_irqoff() and before guest_exit_irqoff()
cannot use RCU and should also be not instrumented.
The current way of doing this covers way too much code. Move it closer to
the actual vmenter/exit code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200708195321.724574345@linutronix.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To avoid complex and in some cases incorrect logic in
kvm_spec_ctrl_test_value, just try the guest's given value on the host
processor instead, and if it doesn't #GP, allow the guest to set it.
One such case is when host CPU supports STIBP mitigation
but doesn't support IBRS (as is the case with some Zen2 AMD cpus),
and in this case we were giving guest #GP when it tried to use STIBP
The reason why can can do the host test is that IA32_SPEC_CTRL msr is
passed to the guest, after the guest sets it to a non zero value
for the first time (due to performance reasons),
and as as result of this, it is pointless to emulate #GP condition on
this first access, in a different way than what the host CPU does.
This is based on a patch from Sean Christopherson, who suggested this idea.
Fixes: 6441fa6178 ("KVM: x86: avoid incorrect writes to host MSR_IA32_SPEC_CTRL")
Cc: stable@vger.kernel.org
Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200708115731.180097-1-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In guest protected mode, if the current privilege level
is not 0 and the PCE flag in the CR4 register is cleared,
we will inject a #GP for RDPMC usage.
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Message-Id: <20200708074409.39028-1-like.xu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
OVMF booted guest running on shadow pages crashes on TRIPLE FAULT after
enabling paging from SMM. The crash is triggered from mmu_check_root() and
is caused by kvm_is_visible_gfn() searching through memslots with as_id = 0
while vCPU may be in a different context (address space).
Introduce kvm_vcpu_is_visible_gfn() and use it from mmu_check_root().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200708140023.1476020-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_x86_ops.vcpu_after_set_cpuid() is used to update vmx/svm specific
vcpu settings based on updated CPUID settings. So it's supposed to be
called after CPUIDs are updated, i.e., kvm_update_cpuid_runtime().
Currently, kvm_update_cpuid_runtime() only updates CPUID bits of OSXSAVE,
APIC, OSPKE, MWAIT, KVM_FEATURE_PV_UNHALT and CPUID(0xD,0).ebx and
CPUID(0xD, 1).ebx. None of them is consumed by vmx/svm's
update_vcpu_after_set_cpuid(). So there is no dependency between them.
Move kvm_x86_ops.vcpu_after_set_cpuid() into kvm_vcpu_after_set_cpuid() is
obviously more reasonable.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200709043426.92712-6-xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The name of callback cpuid_update() is misleading that it's not about
updating CPUID settings of vcpu but updating the configurations of vcpu
based on the CPUIDs. So rename it to vcpu_after_set_cpuid().
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200709043426.92712-5-xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now there is no updating CPUID bits behavior in kvm_update_cpuid(),
rename it to kvm_vcpu_after_set_cpuid().
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200709043426.92712-4-xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Beside called in kvm_vcpu_ioctl_set_cpuid*(), kvm_update_cpuid() is also
called 5 places else in x86.c and 1 place else in lapic.c. All those 6
places only need the part of updating guest CPUIDs (OSXSAVE, OSPKE, APIC,
KVM_FEATURE_PV_UNHALT, ...) based on the runtime vcpu state, so extract
them as a separate kvm_update_cpuid_runtime().
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200709043426.92712-3-xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use kvm_check_cpuid() to validate if userspace provides legal cpuid
settings and call it before KVM take any action to update CPUID or
update vcpu states based on given CPUID settings.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200709043426.92712-2-xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no dependencies between kvm_apic_set_version() and
kvm_update_cpuid() because kvm_apic_set_version() queries X2APIC CPUID bit,
which is not touched/changed by kvm_update_cpuid().
Obviously, kvm_apic_set_version() belongs to the category of updating
vcpu model.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200708065054.19713-9-xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When building with LLVM_IAS=1 means using Clang's Integrated Assembly (IAS)
from LLVM/Clang >= v10.0.1-rc1+ instead of GNU/as from GNU/binutils
I see the following breakage in Debian/testing AMD64:
<instantiation>:15:74: error: too many positional arguments
PRECOMPUTE 8*3+8(%rsp), %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7,
^
arch/x86/crypto/aesni-intel_asm.S:1598:2: note: while in macro instantiation
GCM_INIT %r9, 8*3 +8(%rsp), 8*3 +16(%rsp), 8*3 +24(%rsp)
^
<instantiation>:47:2: error: unknown use of instruction mnemonic without a size suffix
GHASH_4_ENCRYPT_4_PARALLEL_dec %xmm9, %xmm10, %xmm11, %xmm12, %xmm13, %xmm14, %xmm0, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7, %xmm8, enc
^
arch/x86/crypto/aesni-intel_asm.S:1599:2: note: while in macro instantiation
GCM_ENC_DEC dec
^
<instantiation>:15:74: error: too many positional arguments
PRECOMPUTE 8*3+8(%rsp), %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7,
^
arch/x86/crypto/aesni-intel_asm.S:1686:2: note: while in macro instantiation
GCM_INIT %r9, 8*3 +8(%rsp), 8*3 +16(%rsp), 8*3 +24(%rsp)
^
<instantiation>:47:2: error: unknown use of instruction mnemonic without a size suffix
GHASH_4_ENCRYPT_4_PARALLEL_enc %xmm9, %xmm10, %xmm11, %xmm12, %xmm13, %xmm14, %xmm0, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7, %xmm8, enc
^
arch/x86/crypto/aesni-intel_asm.S:1687:2: note: while in macro instantiation
GCM_ENC_DEC enc
Craig Topper suggested me in ClangBuiltLinux issue #1050:
> I think the "too many positional arguments" is because the parser isn't able
> to handle the trailing commas.
>
> The "unknown use of instruction mnemonic" is because the macro was named
> GHASH_4_ENCRYPT_4_PARALLEL_DEC but its being instantiated with
> GHASH_4_ENCRYPT_4_PARALLEL_dec I guess gas ignores case on the
> macro instantiation, but llvm doesn't.
First, I removed the trailing comma in the PRECOMPUTE line.
Second, I substituted:
1. GHASH_4_ENCRYPT_4_PARALLEL_DEC -> GHASH_4_ENCRYPT_4_PARALLEL_dec
2. GHASH_4_ENCRYPT_4_PARALLEL_ENC -> GHASH_4_ENCRYPT_4_PARALLEL_enc
With these changes I was able to build with LLVM_IAS=1 and boot on bare metal.
I confirmed that this works with Linux-kernel v5.7.5 final.
NOTE: This patch is on top of Linux v5.7 final.
Thanks to Craig and especially Nick for double-checking and his comments.
Suggested-by: Craig Topper <craig.topper@intel.com>
Suggested-by: Craig Topper <craig.topper@gmail.com>
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: "ClangBuiltLinux" <clang-built-linux@googlegroups.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1050
Link: https://bugs.llvm.org/show_bug.cgi?id=24494
Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Only code cleanup and no functional change.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200708065054.19713-8-xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As handling of bits out of leaf 1 added over time, kvm_update_cpuid()
should not return directly if leaf 1 is absent, but should go on
updateing other CPUID leaves.
Keep the update of apic->lapic_timer.timer_mode_mask in a separate
wrapper, to minimize churn for code since it will be moved out of this
function in a future patch.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200708065054.19713-3-xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Current implementation keeps userspace input of CPUID configuration and
cpuid->nent even if kvm_update_cpuid() fails. Reset vcpu->arch.cpuid_nent
to 0 for the case of failure as a simple fix.
Besides, update the doc to explicitly state that if IOCTL SET_CPUID*
fail KVM gives no gurantee that previous valid CPUID configuration is
kept.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200708065054.19713-2-xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some new Intel platforms (such as TGL) already have the
fourth fixed counter TOPDOWN.SLOTS, but it has not been
fully enabled on KVM and the host.
Therefore, we limit edx.split.num_counters_fixed to 3,
so that it does not break the kvm-unit-tests PMU test
case and bad-handled userspace.
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Message-Id: <20200624015928.118614-1-like.xu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to section "Canonicalization and Consistency Checks" in APM vol. 2
the following guest state is illegal:
"Any MBZ bit of CR3 is set."
"Any MBZ bit of CR4 is set."
Suggeted-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Message-Id: <1594168797-29444-3-git-send-email-krish.sadhukhan@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CR4.VMXE is reserved unless the VMX CPUID bit is set. On Intel,
it is also tested by vmx_set_cr4, but AMD relies on kvm_valid_cr4,
so fix it.
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of creating the mask for guest CR4 reserved bits in kvm_valid_cr4(),
do it in kvm_update_cpuid() so that it can be reused instead of creating it
each time kvm_valid_cr4() is called.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Message-Id: <1594168797-29444-2-git-send-email-krish.sadhukhan@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to the SDM, when PAE paging would be in use following a
MOV-to-CR0 that modifies any of CR0.CD, CR0.NW, or CR0.PG, then the
PDPTEs are loaded from the address in CR3. Previously, kvm only loaded
the PDPTEs when PAE paging would be in use following a MOV-to-CR0 that
modified CR0.PG.
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Message-Id: <20200707223630.336700-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Map "xen_nopvspin" to "nopvspin", fix stale description of "xen_nopvspin"
as we use qspinlock now.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are cases where a guest tries to switch spinlocks to bare metal
behavior (e.g. by setting "xen_nopvspin" on XEN platform and
"hv_nopvspin" on HYPER_V).
That feature is missed on KVM, add a new parameter "nopvspin" to disable
PV spinlocks for KVM guest.
The new 'nopvspin' parameter will also replace Xen and Hyper-V specific
parameters in future patches.
Define variable nopvsin as global because it will be used in future
patches as above.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krcmar <rkrcmar@redhat.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Wanpeng Li <wanpengli@tencent.com>
Cc: Jim Mattson <jmattson@google.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
pr_*() is preferred than printk(KERN_* ...), after change all the print
in arch/x86/kernel/kvm.c will have "kvm-guest: xxx" style.
No functional change.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krcmar <rkrcmar@redhat.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Wanpeng Li <wanpengli@tencent.com>
Cc: Jim Mattson <jmattson@google.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
