The current nested KVM code does not support HPT guests. This is
informed/enforced in some ways:
- Hosts < P9 will not be able to enable the nested HV feature;
- The nested hypervisor MMU capabilities will not contain
KVM_CAP_PPC_MMU_HASH_V3;
- QEMU reflects the MMU capabilities in the
'ibm,arch-vec-5-platform-support' device-tree property;
- The nested guest, at 'prom_parse_mmu_model' ignores the
'disable_radix' kernel command line option if HPT is not supported;
- The KVM_PPC_CONFIGURE_V3_MMU ioctl will fail if trying to use HPT.
There is, however, still a way to start a HPT guest by using
max-compat-cpu=power8 at the QEMU machine options. This leads to the
guest being set to use hash after QEMU calls the KVM_PPC_ALLOCATE_HTAB
ioctl.
With the guest set to hash, the nested hypervisor goes through the
entry path that has no knowledge of nesting (kvmppc_run_vcpu) and
crashes when it tries to execute an hypervisor-privileged (mtspr
HDEC) instruction at __kvmppc_vcore_entry:
root@L1:~ $ qemu-system-ppc64 -machine pseries,max-cpu-compat=power8 ...
<snip>
[ 538.543303] CPU: 83 PID: 25185 Comm: CPU 0/KVM Not tainted 5.9.0-rc4 #1
[ 538.543355] NIP: c00800000753f388 LR: c00800000753f368 CTR: c0000000001e5ec0
[ 538.543417] REGS: c0000013e91e33b0 TRAP: 0700 Not tainted (5.9.0-rc4)
[ 538.543470] MSR: 8000000002843033 <SF,VEC,VSX,FP,ME,IR,DR,RI,LE> CR: 22422882 XER: 20040000
[ 538.543546] CFAR: c00800000753f4b0 IRQMASK: 3
GPR00: c0080000075397a0 c0000013e91e3640 c00800000755e600 0000000080000000
GPR04: 0000000000000000 c0000013eab19800 c000001394de0000 00000043a054db72
GPR08: 00000000003b1652 0000000000000000 0000000000000000 c0080000075502e0
GPR12: c0000000001e5ec0 c0000007ffa74200 c0000013eab19800 0000000000000008
GPR16: 0000000000000000 c00000139676c6c0 c000000001d23948 c0000013e91e38b8
GPR20: 0000000000000053 0000000000000000 0000000000000001 0000000000000000
GPR24: 0000000000000001 0000000000000001 0000000000000000 0000000000000001
GPR28: 0000000000000001 0000000000000053 c0000013eab19800 0000000000000001
[ 538.544067] NIP [c00800000753f388] __kvmppc_vcore_entry+0x90/0x104 [kvm_hv]
[ 538.544121] LR [c00800000753f368] __kvmppc_vcore_entry+0x70/0x104 [kvm_hv]
[ 538.544173] Call Trace:
[ 538.544196] [c0000013e91e3640] [c0000013e91e3680] 0xc0000013e91e3680 (unreliable)
[ 538.544260] [c0000013e91e3820] [c0080000075397a0] kvmppc_run_core+0xbc8/0x19d0 [kvm_hv]
[ 538.544325] [c0000013e91e39e0] [c00800000753d99c] kvmppc_vcpu_run_hv+0x404/0xc00 [kvm_hv]
[ 538.544394] [c0000013e91e3ad0] [c0080000072da4fc] kvmppc_vcpu_run+0x34/0x48 [kvm]
[ 538.544472] [c0000013e91e3af0] [c0080000072d61b8] kvm_arch_vcpu_ioctl_run+0x310/0x420 [kvm]
[ 538.544539] [c0000013e91e3b80] [c0080000072c7450] kvm_vcpu_ioctl+0x298/0x778 [kvm]
[ 538.544605] [c0000013e91e3ce0] [c0000000004b8c2c] sys_ioctl+0x1dc/0xc90
[ 538.544662] [c0000013e91e3dc0] [c00000000002f9a4] system_call_exception+0xe4/0x1c0
[ 538.544726] [c0000013e91e3e20] [c00000000000d140] system_call_common+0xf0/0x27c
[ 538.544787] Instruction dump:
[ 538.544821] f86d1098 60000000 60000000 48000099 e8ad0fe8 e8c500a0 e9264140 75290002
[ 538.544886] 7d1602a6 7cec42a6 40820008 7d0807b4 <7d164ba6> 7d083a14 f90d10a0 480104fd
[ 538.544953] ---[ end trace 74423e2b948c2e0c ]---
This patch makes the KVM_PPC_ALLOCATE_HTAB ioctl fail when running in
the nested hypervisor, causing QEMU to abort.
Reported-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
ENOTSUPP is a linux only thingy, the value of which is unknown to
userspace, not to be confused with ENOTSUP which linux maps to
EOPNOTSUPP, as permitted by POSIX [1]:
[EOPNOTSUPP]
Operation not supported on socket. The type of socket (address family
or protocol) does not support the requested operation. A conforming
implementation may assign the same values for [EOPNOTSUPP] and [ENOTSUP].
Return -EOPNOTSUPP instead of -ENOTSUPP for the following ioctls:
- KVM_GET_FPU for Book3s and BookE
- KVM_SET_FPU for Book3s and BookE
- KVM_GET_DIRTY_LOG for BookE
This doesn't affect QEMU which doesn't call the KVM_GET_FPU and
KVM_SET_FPU ioctls on POWER anyway since they are not supported,
and _buggily_ ignores anything but -EPERM for KVM_GET_DIRTY_LOG.
[1] https://pubs.opengroup.org/onlinepubs/9699919799/functions/V2_chap02.html
Signed-off-by: Greg Kurz <groug@kaod.org>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The arch_.*_msi_irq[s] fallbacks are compiled in whether an architecture
requires them or not. Architectures which are fully utilizing hierarchical
irq domains should never call into that code.
It's not only architectures which depend on that by implementing one or
more of the weak functions, there is also a bunch of drivers which relies
on the weak functions which invoke msi_controller::setup_irq[s] and
msi_controller::teardown_irq.
Make the architectures and drivers which rely on them select them in Kconfig
and if not selected replace them by stub functions which emit a warning and
fail the PCI/MSI interrupt allocation.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200826112333.992429909@linutronix.de
Lookup the coregroup id from the associativity array.
If unable to detect the coregroup id, fallback on the core id.
This way, ensure sched_domain degenerates and an extra sched domain is
not created.
Ideally this function should have been implemented in
arch/powerpc/kernel/smp.c. However if its implemented in mm/numa.c, we
don't need to find the primary domain again.
If the device-tree mentions more than one coregroup, then kernel
implements only the last or the smallest coregroup, which currently
corresponds to the penultimate domain in the device-tree.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200810071834.92514-11-srikar@linux.vnet.ibm.com
Add percpu coregroup maps and masks to create coregroup domain.
If a coregroup doesn't exist, the coregroup domain will be degenerated
in favour of SMT/CACHE domain. Do note this patch is only creating stubs
for cpu_to_coregroup_id. The actual cpu_to_coregroup_id implementation
would be in a subsequent patch.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200810071834.92514-10-srikar@linux.vnet.ibm.com
If allocated earlier and the search fails, then cpu_l1_cache_map cpumask
is unnecessarily cleared. However cpu_l1_cache_map can be allocated /
cleared after we search thread group.
Please note CONFIG_CPUMASK_OFFSTACK is not set on Powerpc. Hence cpumask
allocated by zalloc_cpumask_var_node is never freed.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200810071834.92514-9-srikar@linux.vnet.ibm.com
Add support for grouping cores based on the device-tree classification.
- The last domain in the associativity domains always refers to the
core.
- If primary reference domain happens to be the penultimate domain in
the associativity domains device-tree property, then there are no
coregroups. However if its not a penultimate domain, then there are
coregroups. There can be more than one coregroup. For now we would be
interested in the last or the smallest coregroups, i.e one sub-group
per DIE.
Currently there are no firmwares that are exposing this grouping. Hence
allow the basis for grouping to be abstract. Once the firmware starts
using this grouping, code would be added to detect the type of grouping
and adjust the sd domain flags accordingly.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200810071834.92514-8-srikar@linux.vnet.ibm.com
In start_secondary, even if shared_cache was already set, system does a
redundant match for cpumask. This redundant check can be removed by
checking if shared_cache is already set.
While here, localize the sibling_mask variable to within the if
condition.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200810071834.92514-7-srikar@linux.vnet.ibm.com
Current code assumes that cpumask of cpus sharing a l2-cache mask will
always be a superset of cpu_sibling_mask.
Lets stop that assumption. cpu_l2_cache_mask is a superset of
cpu_sibling_mask if and only if shared_caches is set.
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200913171038.GB11808@linux.vnet.ibm.com
Move topology fixup based on the platform attributes into its own
function which is called just before set_sched_topology.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200810071834.92514-5-srikar@linux.vnet.ibm.com
Just moving the powerpc_topology description above.
This will help in using functions in this file and avoid declarations.
No other functional changes
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200810071834.92514-4-srikar@linux.vnet.ibm.com
A new sched_domain_topology_level was added just for Power9. However the
same can be achieved by merging powerpc_topology with power9_topology
and makes the code more simpler especially when adding a new sched
domain.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200810071834.92514-3-srikar@linux.vnet.ibm.com
Fix a build warning in a non CONFIG_NEED_MULTIPLE_NODES
"error: _numa_cpu_lookup_table_ undeclared"
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200810071834.92514-2-srikar@linux.vnet.ibm.com
Currently Linux kernel with CONFIG_NUMA on a system with multiple
possible nodes, marks node 0 as online at boot. However in practice,
there are systems which have node 0 as memoryless and cpuless.
This can cause numa_balancing to be enabled on systems with only one node
with memory and CPUs. The existence of this dummy node which is cpuless and
memoryless node can confuse users/scripts looking at output of lscpu /
numactl.
By marking, node 0 as offline, lets stop assuming that node 0 is
always online. If node 0 has CPU or memory that are online, node 0 will
again be set as online.
v5.8
available: 2 nodes (0,2)
node 0 cpus:
node 0 size: 0 MB
node 0 free: 0 MB
node 2 cpus: 0 1 2 3 4 5 6 7
node 2 size: 32625 MB
node 2 free: 31490 MB
node distances:
node 0 2
0: 10 20
2: 20 10
proc and sys files
------------------
/sys/devices/system/node/online: 0,2
/proc/sys/kernel/numa_balancing: 1
/sys/devices/system/node/has_cpu: 2
/sys/devices/system/node/has_memory: 2
/sys/devices/system/node/has_normal_memory: 2
/sys/devices/system/node/possible: 0-31
v5.8 + patch
------------------
available: 1 nodes (2)
node 2 cpus: 0 1 2 3 4 5 6 7
node 2 size: 32625 MB
node 2 free: 31487 MB
node distances:
node 2
2: 10
proc and sys files
------------------
/sys/devices/system/node/online: 2
/proc/sys/kernel/numa_balancing: 0
/sys/devices/system/node/has_cpu: 2
/sys/devices/system/node/has_memory: 2
/sys/devices/system/node/has_normal_memory: 2
/sys/devices/system/node/possible: 0-31
Example of a node with online CPUs/memory on node 0.
(Same o/p with and without patch)
numactl -H
available: 4 nodes (0-3)
node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47
node 0 size: 32482 MB
node 0 free: 22994 MB
node 1 cpus: 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95
node 1 size: 0 MB
node 1 free: 0 MB
node 2 cpus: 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143
node 2 size: 0 MB
node 2 free: 0 MB
node 3 cpus: 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 node 3 size: 0 MB
node 3 free: 0 MB
node distances:
node 0 1 2 3
0: 10 20 40 40
1: 20 10 40 40
2: 40 40 10 20
3: 40 40 20 10
Note: On Powerpc, cpu_to_node of possible but not present cpus would
previously return 0. Hence this commit depends on commit ("powerpc/numa: Set
numa_node for all possible cpus") and commit ("powerpc/numa: Prefer node id
queried from vphn"). Without the 2 commits, Powerpc system might crash.
1. User space applications like Numactl, lscpu, that parse the sysfs tend to
believe there is an extra online node. This tends to confuse users and
applications. Other user space applications start believing that system was
not able to use all the resources (i.e missing resources) or the system was
not setup correctly.
2. Also existence of dummy node also leads to inconsistent information. The
number of online nodes is inconsistent with the information in the
device-tree and resource-dump
3. When the dummy node is present, single node non-Numa systems end up showing
up as NUMA systems and numa_balancing gets enabled. This will mean we take
the hit from the unnecessary numa hinting faults.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200818081104.57888-4-srikar@linux.vnet.ibm.com
Node id queried from the static device tree may not
be correct. For example: it may always show 0 on a shared processor.
Hence prefer the node id queried from vphn and fallback on the device tree
based node id if vphn query fails.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200818081104.57888-3-srikar@linux.vnet.ibm.com
A Powerpc system with multiple possible nodes and with CONFIG_NUMA
enabled always used to have a node 0, even if node 0 does not any cpus
or memory attached to it. As per PAPR, node affinity of a cpu is only
available once its present / online. For all cpus that are possible but
not present, cpu_to_node() would point to node 0.
To ensure a cpuless, memoryless dummy node is not online, powerpc need
to make sure all possible but not present cpu_to_node are set to a
proper node.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200818081104.57888-2-srikar@linux.vnet.ibm.com
As per draft LoPAPR (Revision 2.9_pre7), section B.5.3 "Run Time
Abstraction Services (RTAS) Node" available at:
https://openpowerfoundation.org/wp-content/uploads/2020/07/LoPAR-20200611.pdf
... there are 2 device tree properties:
"ibm,max-associativity-domains"
which defines the maximum number of domains that the firmware i.e
PowerVM can support.
and:
"ibm,current-associativity-domains"
which defines the maximum number of domains that the current
platform can support.
The value of "ibm,max-associativity-domains" is always greater than or
equal to "ibm,current-associativity-domains" property. If the latter
property is not available, use "ibm,max-associativity-domain" as a
fallback. In this yet to be released LoPAPR, "ibm,current-associativity-domains"
is mentioned in page 833 / B.5.3 which is covered under under
"Appendix B. System Binding" section
Currently powerpc uses the "ibm,max-associativity-domains" property
while setting the possible number of nodes. This is currently set at
32. However the possible number of nodes for a platform may be
significantly less. Hence set the possible number of nodes based on
"ibm,current-associativity-domains" property.
Nathan Lynch had raised a valid concern that post LPM (Live Partition
Migration), a user could DLPAR add processors and memory after LPM
with "new" associativity properties:
https://lore.kernel.org/linuxppc-dev/871rljfet9.fsf@linux.ibm.com/t/#u
He also pointed out that "ibm,max-associativity-domains" has the same
contents on all currently available PowerVM systems, unlike
"ibm,current-associativity-domains" and hence may be better able to
handle the new NUMA associativity properties.
However with the recent commit dbce456280 ("powerpc/numa: Limit
possible nodes to within num_possible_nodes"), all new NUMA
associativity properties are capped to initially set nr_node_ids.
Hence this commit should be safe with any new DLPAR add post LPM.
$ lsprop /proc/device-tree/rtas/ibm,*associ*-domains
/proc/device-tree/rtas/ibm,current-associativity-domains
00000005 00000001 00000002 00000002 00000002 00000010
/proc/device-tree/rtas/ibm,max-associativity-domains
00000005 00000001 00000008 00000020 00000020 00000100
$ cat /sys/devices/system/node/possible ##Before patch
0-31
$ cat /sys/devices/system/node/possible ##After patch
0-1
Note the maximum nodes this platform can support is only 2 but the
possible nodes is set to 32.
This is important because lot of kernel and user space code allocate
structures for all possible nodes leading to a lot of memory that is
allocated but not used.
I ran a simple experiment to create and destroy 100 memory cgroups on
boot on a 8 node machine (Power8 Alpine).
Before patch:
free -k at boot
total used free shared buff/cache available
Mem: 523498176 4106816 518820608 22272 570752 516606720
Swap: 4194240 0 4194240
free -k after creating 100 memory cgroups
total used free shared buff/cache available
Mem: 523498176 4628416 518246464 22336 623296 516058688
Swap: 4194240 0 4194240
free -k after destroying 100 memory cgroups
total used free shared buff/cache available
Mem: 523498176 4697408 518173760 22400 627008 515987904
Swap: 4194240 0 4194240
After patch:
free -k at boot
total used free shared buff/cache available
Mem: 523498176 3969472 518933888 22272 594816 516731776
Swap: 4194240 0 4194240
free -k after creating 100 memory cgroups
total used free shared buff/cache available
Mem: 523498176 4181888 518676096 22208 640192 516496448
Swap: 4194240 0 4194240
free -k after destroying 100 memory cgroups
total used free shared buff/cache available
Mem: 523498176 4232320 518619904 22272 645952 516443264
Swap: 4194240 0 4194240
Observations:
Fixed kernel takes 137344 kb (4106816-3969472) less to boot.
Fixed kernel takes 309184 kb (4628416-4181888-137344) less to create 100 memcgs.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
[mpe: Reformat change log a bit for readability]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200817055257.110873-1-srikar@linux.vnet.ibm.com
A warning is reported by the kernel in case perf_stats_show() returns
an error code. The warning is of the form below:
papr_scm ibm,persistent-memory:ibm,pmemory@44100001:
Failed to query performance stats, Err:-10
dev_attr_show: perf_stats_show+0x0/0x1c0 [papr_scm] returned bad count
fill_read_buffer: dev_attr_show+0x0/0xb0 returned bad count
On investigation it looks like that the compiler is silently
truncating the return value of drc_pmem_query_stats() from 'long' to
'int', since the variable used to store the return code 'rc' is an
'int'. This truncated value is then returned back as a 'ssize_t' back
from perf_stats_show() to 'dev_attr_show()' which thinks of it as a
large unsigned number and triggers this warning..
To fix this we update the type of variable 'rc' from 'int' to
'ssize_t' that prevents the compiler from truncating the return value
of drc_pmem_query_stats() and returning correct signed value back from
perf_stats_show().
Fixes: 2d02bf835e ("powerpc/papr_scm: Fetch nvdimm performance stats from PHYP")
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200912081451.66225-1-vaibhav@linux.ibm.com
Commit 0cef77c779 ("powerpc/64s/radix: flush remote CPUs out of
single-threaded mm_cpumask") added a mechanism to trim the mm_cpumask of
a process under certain conditions. One of the assumptions is that
mm_users would not be incremented via a reference outside the process
context with mmget_not_zero() then go on to kthread_use_mm() via that
reference.
That invariant was broken by io_uring code (see previous sparc64 fix),
but I'll point Fixes: to the original powerpc commit because we are
changing that assumption going forward, so this will make backports
match up.
Fix this by no longer relying on that assumption, but by having each CPU
check the mm is not being used, and clearing their own bit from the mask
only if it hasn't been switched-to by the time the IPI is processed.
This relies on commit 38cf307c1f ("mm: fix kthread_use_mm() vs TLB
invalidate") and ARCH_WANT_IRQS_OFF_ACTIVATE_MM to disable irqs over mm
switch sequences.
Fixes: 0cef77c779 ("powerpc/64s/radix: flush remote CPUs out of single-threaded mm_cpumask")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Michael Ellerman <mpe@ellerman.id.au>
Depends-on: 38cf307c1f ("mm: fix kthread_use_mm() vs TLB invalidate")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200914045219.3736466-5-npiggin@gmail.com
powerpc uses IPIs in some situations to switch a kernel thread away
from a lazy tlb mm, which is subject to the TLB flushing race
described in the changelog introducing ARCH_WANT_IRQS_OFF_ACTIVATE_MM.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200914045219.3736466-3-npiggin@gmail.com
When a passthrough IO adapter is removed from a pseries machine using
hash MMU and the XIVE interrupt mode, the POWER hypervisor expects the
guest OS to clear all page table entries related to the adapter. If
some are still present, the RTAS call which isolates the PCI slot
returns error 9001 "valid outstanding translations" and the removal of
the IO adapter fails. This is because when the PHBs are scanned, Linux
maps automatically the INTx interrupts in the Linux interrupt number
space but these are never removed.
To solve this problem, we introduce a PPC platform specific
pcibios_remove_bus() routine which clears all interrupt mappings when
the bus is removed. This also clears the associated page table entries
of the ESB pages when using XIVE.
For this purpose, we record the logical interrupt numbers of the
mapped interrupt under the PHB structure and let pcibios_remove_bus()
do the clean up.
Since some PCI adapters, like GPUs, use the "interrupt-map" property
to describe interrupt mappings other than the legacy INTx interrupts,
we can not restrict the size of the mapping array to PCI_NUM_INTX. The
number of interrupt mappings is computed from the "interrupt-map"
property and the mapping array is allocated accordingly.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200807101854.844619-1-clg@kaod.org
This driver does not restore stop > 3 state, so it limits itself
to states which do not lose full state or TB.
The POWER10 SPRs are sufficiently different from P9 that it seems
easier to split out the P10 code. The POWER10 deep sleep code
(e.g., the BHRB restore) has been taken out, but it can be re-added
when stop > 3 support is added.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Pratik Rajesh Sampat<psampat@linux.ibm.com>
Tested-by: Vaidyanathan Srinivasan <svaidy@linux.ibm.com>
Reviewed-by: Pratik Rajesh Sampat<psampat@linux.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200819094700.493399-1-npiggin@gmail.com
This ensures we don't do a partial mapping of memory. With nvdimm, when
creating namespaces with size not aligned to 16MB, the kernel ends up partially
mapping the pages. This can result in kernel adding multiple hash page table
entries for the same range. A new namespace will result in
create_section_mapping() with start and end overlapping an already existing
bolted hash page table entry.
commit: 6acd7d5ef2 ("libnvdimm/namespace: Enforce memremap_compat_align()")
made sure that we always create namespaces aligned to 16MB. But we can do
better by avoiding mapping pages that are not aligned. This helps to catch
access to these partially mapped pages early.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200907072539.67310-1-aneesh.kumar@linux.ibm.com
This addresses the following sparse warning:
arch/powerpc/platforms/ps3/spu.c:451:33: warning: symbol
'spu_management_ps3_ops' was not declared. Should it be static?
arch/powerpc/platforms/ps3/spu.c:592:28: warning: symbol
'spu_priv1_ps3_ops' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200911020121.1464585-1-yanaijie@huawei.com
Before the commit identified below, pages tables allocation was
performed after the allocation of final shadow area for linear memory.
But that commit switched the order, leading to page tables being
already allocated at the time 8xx kasan_init_shadow_8M() is called.
Due to this, kasan_init_shadow_8M() doesn't map the needed
shadow entries because there are already page tables.
kasan_init_shadow_8M() installs huge PMD entries instead of page
tables. We could at that time free the page tables, but there is no
point in creating page tables that get freed before being used.
Only book3s/32 hash needs early allocation of page tables. For other
variants, we can keep the initial order and create remaining page
tables after the allocation of final shadow memory for linear mem.
Move back the allocation of shadow page tables for
CONFIG_KASAN_VMALLOC into kasan_init() after the loop which creates
final shadow memory for linear mem.
Fixes: 41ea93cf7b ("powerpc/kasan: Fix shadow pages allocation failure")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8ae4554357da4882612644a74387ae05525b2aaa.1599800716.git.christophe.leroy@csgroup.eu
cpu_has_feature(CPU_FTR_SPE) returns false when CONFIG_SPE is
not set.
There is no need to enclose the test in an #ifdef CONFIG_SPE.
Remove it.
CPU_FTR_SPE only exists on 32 bits. Define it as 0 on 64 bits.
We have a couple of places like:
#ifdef CONFIG_SPE
if (cpu_has_feature(CPU_FTR_SPE)) {
do_something_that_requires_CONFIG_SPE
} else {
return -EINVAL;
}
#else
return -EINVAL;
#endif
Replace them by a cleaner version:
if (cpu_has_feature(CPU_FTR_SPE)) {
#ifdef CONFIG_SPE
do_something_that_requires_CONFIG_SPE
#endif
} else {
return -EINVAL;
}
When CONFIG_SPE is not set, this resolves to an unconditional
return of -EINVAL
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/698df8387555765b70ea42e4a7fa48141c309c1f.1597643221.git.christophe.leroy@csgroup.eu
This #ifdef CONFIG_PPC_BOOK3S_64 calls preload_new_slb_context()
when radix is not enabled.
radix_enabled() is always defined, and the prototype for
preload_new_slb_context() is always present, so the #ifdef
is unneeded.
Replace it by IS_ENABLED().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d31506ca9bac9def68cf7424eded63fdc4fb6660.1597643167.git.christophe.leroy@csgroup.eu
We need r1 to be properly set before activating MMU, otherwise any new
exception taken while saving registers into the stack in exception
prologs will use the user stack, which is wrong and will even lockup
or crash when KUAP is selected.
Do that by switching the meaning of r11 and r1 until we have saved r1
to the stack: copy r1 into r11 and setup the new stack pointer in r1.
To avoid complicating and impacting all generic and specific prolog
code (and more), copy back r1 into r11 once r11 is save onto
the stack.
We could get rid of copying r1 back and forth at the cost of
rewriting everything to use r1 instead of r11 all the way when
CONFIG_VMAP_STACK is set, but the effort is probably not worth it.
Fixes: 028474876f ("powerpc/32: prepare for CONFIG_VMAP_STACK")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8f85e8752ac5af602db7237ef53d634f4f3d3892.1599486108.git.christophe.leroy@csgroup.eu
We need r1 to be properly set before activating MMU, so
reading task_struct->stack must be done with MMU off.
This means we need an additional register to play with MSR
bits while r11 now points to the stack. For that, move r10
back to CR (As is already done for hash MMU) and use r10.
We still don't have r1 correct yet when we activate MMU.
It is done in following patch.
Fixes: 028474876f ("powerpc/32: prepare for CONFIG_VMAP_STACK")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a027d447022a006c9c4958ac734128e577a3c5c1.1599486108.git.christophe.leroy@csgroup.eu
The 8xx has 4 page sizes: 4k, 16k, 512k and 8M
4k and 16k can be selected at build time as standard page sizes,
and 512k and 8M are hugepages.
When 4k standard pages are selected, 16k pages are not available.
Allow 16k pages as hugepages when 4k pages are used.
To allow that, implement arch_make_huge_pte() which receives
the necessary arguments to allow setting the PTE in accordance
with the page size:
- 512 k pages must have _PAGE_HUGE and _PAGE_SPS. They are set
by pte_mkhuge(). arch_make_huge_pte() does nothing.
- 16 k pages must have only _PAGE_SPS. arch_make_huge_pte() clears
_PAGE_HUGE.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a518abc29266a708dfbccc8fce9ae6694fe4c2c6.1598862623.git.christophe.leroy@csgroup.eu
On 8xx, the number of entries occupied by a PTE in the page tables
depends on the size of the page. At the time being, this calculation
is done in two places: in pte_update() and in set_huge_pte_at()
Refactor this calculation into a helper called
number_of_cells_per_pte(). For the time being, the val param is
unused. It will be used by following patch.
Instead of opencoding is_hugepd(), use hugepd_ok() with a forward
declaration.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f6ea2483c2c389567b007945948f704d18cfaeea.1598862623.git.christophe.leroy@csgroup.eu
The following random segfault is observed from time to time with
map_hugetlb selftest:
root@localhost:~# ./map_hugetlb 1 19
524288 kB hugepages
Mapping 1 Mbytes
Segmentation fault
[ 31.219972] map_hugetlb[365]: segfault (11) at 117 nip 77974f8c lr 779a6834 code 1 in ld-2.23.so[77966000+21000]
[ 31.220192] map_hugetlb[365]: code: 9421ffc0 480318d1 93410028 90010044 9361002c 93810030 93a10034 93c10038
[ 31.220307] map_hugetlb[365]: code: 93e1003c 93210024 8123007c 81430038 <80e90004> 814a0004 7f443a14 813a0004
[ 31.221911] BUG: Bad rss-counter state mm:(ptrval) type:MM_FILEPAGES val:33
[ 31.229362] BUG: Bad rss-counter state mm:(ptrval) type:MM_ANONPAGES val:5
This fault is due to hugetlb_free_pgd_range() freeing page tables
that are also used by regular pages.
As explain in the comment at the beginning of
hugetlb_free_pgd_range(), the verification done in free_pgd_range()
on floor and ceiling is not done here, which means
hugetlb_free_pte_range() can free outside the expected range.
As the verification cannot be done in hugetlb_free_pgd_range(), it
must be done in hugetlb_free_pte_range().
Fixes: b250c8c08c ("powerpc/8xx: Manage 512k huge pages as standard pages.")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f0cb2a5477cd87d1eaadb128042e20aeb2bc2859.1598860677.git.christophe.leroy@csgroup.eu
According to Freescale's documentation, MPC74XX processors have an
erratum that prevents the TAU interrupt from working, so don't try to
use it when running on those processors.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c281611544768e758bd58fe812cf702a5bd2d042.1599260540.git.fthain@telegraphics.com.au
The commentary at the call site seems to disagree with the code. The
conditional prevents calling set_thresholds() via the exception handler,
which appears to crash. Perhaps that's because it immediately triggers
another TAU exception. Anyway, calling set_thresholds() from TAUupdate()
is redundant because tau_timeout() does so.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d7c7ee33232cf72a6a6bbb6ef05838b2e2b113c0.1599260540.git.fthain@telegraphics.com.au
According to the MPC750 Users Manual, the SITV value in Thermal
Management Register 3 is 13 bits long. The present code calculates the
SITV value as 60 * 500 cycles. This would overflow to give 10 us on
a 500 MHz CPU rather than the intended 60 us. (But according to the
Microprocessor Datasheet, there is also a factor of 266 that has to be
applied to this value on certain parts i.e. speed sort above 266 MHz.)
Always use the maximum cycle count, as recommended by the Datasheet.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/896f542e5f0f1d6cf8218524c2b67d79f3d69b3c.1599260540.git.fthain@telegraphics.com.au
MAX_PHYSMEM #define is used along with sparsemem to determine the SECTION_SHIFT
value. Powerpc also uses the same value to limit the max memory enabled on the
system. With 4K PAGE_SIZE and hash translation mode, we want to limit the max
memory enabled to 64TB due to page table size restrictions. However, with
radix translation, we don't have these restrictions. Hence split the radix
and hash MA_PHYSMEM limit and use different limit for each of them.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200608070904.387440-4-aneesh.kumar@linux.ibm.com
With commit: 0034d395f8 ("powerpc/mm/hash64: Map all the kernel
regions in the same 0xc range"), we now split the 64TB address range
into 4 contexts each of 16TB. That implies we can do only 16TB linear
mapping.
On some systems, eg. Power9, memory attached to nodes > 0 will appear
above 16TB in the linear mapping. This resulted in kernel crash when
we boot such systems in hash translation mode with 4K PAGE_SIZE.
This patch updates the kernel mapping such that we now start supporting upto
61TB of memory with 4K. The kernel mapping now looks like below 4K PAGE_SIZE
and hash translation.
vmalloc start = 0xc0003d0000000000
IO start = 0xc0003e0000000000
vmemmap start = 0xc0003f0000000000
Our MAX_PHYSMEM_BITS for 4K is still 64TB even though we can only map 61TB.
We prevent bolt mapping anything outside 61TB range by checking against
H_VMALLOC_START.
Fixes: 0034d395f8 ("powerpc/mm/hash64: Map all the kernel regions in the same 0xc range")
Reported-by: Cameron Berkenpas <cam@neo-zeon.de>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200608070904.387440-3-aneesh.kumar@linux.ibm.com
Implement page mapping percpu first chunk allocator as a fallback to
the embedding allocator. With 4K hash translation we limit our page
table range to 64TB and commit: 0034d395f8 ("powerpc/mm/hash64: Map all the
kernel regions in the same 0xc range") moved all kernel mapping to
that 64TB range. In-order to support sparse memory layout we need
to increase our linear mapping space and reduce other mappings.
With such a layout percpu embedded first chunk allocator will fail
because of small vmalloc range. Add a fallback to page mapping
percpu first chunk allocator for such failures.
The below dmesg output can be observed in such case.
percpu: max_distance=0x1ffffef00000 too large for vmalloc space 0x10000000000
PERCPU: auto allocator failed (-22), falling back to page size
percpu: 40 4K pages/cpu s148816 r0 d15024
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200608070904.387440-2-aneesh.kumar@linux.ibm.com
PPC_DEBUG_FEATURE_DATA_BP_ARCH_31 can be used to determine whether
we are running on an ISA 3.1 compliant machine. Which is needed to
determine DAR behaviour, 512 byte boundary limit etc. This was
requested by Pedro Miraglia Franco de Carvalho for extending
watchpoint features in gdb. Note that availability of 2nd DAWR is
independent of this flag and should be checked using
ppc_debug_info->num_data_bps.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200902042945.129369-8-ravi.bangoria@linux.ibm.com
There are couple of places where we set len but not hw_len. For
ptrace/perf watchpoints, when CONFIG_HAVE_HW_BREAKPOINT=Y, hw_len
will be calculated and set internally while parsing watchpoint.
But when CONFIG_HAVE_HW_BREAKPOINT=N, we need to manually set
'hw_len'. Similarly for xmon as well, hw_len needs to be set
directly.
Fixes: b57aeab811 ("powerpc/watchpoint: Fix length calculation for unaligned target")
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200902042945.129369-7-ravi.bangoria@linux.ibm.com
On powerpc, ptrace watchpoint works in one-shot mode. i.e. kernel
disables event every time it fires and user has to re-enable it.
Also, in case of ptrace watchpoint, kernel notifies ptrace user
before executing instruction.
With CONFIG_HAVE_HW_BREAKPOINT=N, kernel is missing to disable
ptrace event and thus it's causing infinite loop of exceptions.
This is especially harmful when user watches on a data which is
also read/written by kernel, eg syscall parameters. In such case,
infinite exceptions happens in kernel mode which causes soft-lockup.
Fixes: 9422de3e95 ("powerpc: Hardware breakpoints rewrite to handle non DABR breakpoint registers")
Reported-by: Pedro Miraglia Franco de Carvalho <pedromfc@linux.ibm.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200902042945.129369-6-ravi.bangoria@linux.ibm.com
Power10 hw has multiple DAWRs but hw doesn't tell which DAWR caused
the exception. So we have a sw logic to detect that in hw_breakpoint.c.
But hw_breakpoint.c gets compiled only with CONFIG_HAVE_HW_BREAKPOINT=Y.
Move DAWR detection logic outside of hw_breakpoint.c so that it can be
reused when CONFIG_HAVE_HW_BREAKPOINT is not set.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200902042945.129369-5-ravi.bangoria@linux.ibm.com
When kernel is compiled with CONFIG_HAVE_HW_BREAKPOINT=N, user can
still create watchpoint using PPC_PTRACE_SETHWDEBUG, with limited
functionalities. But, such watchpoints are never firing because of
the missing privilege settings. Fix that.
It's safe to set HW_BRK_TYPE_PRIV_ALL because we don't really leak
any kernel address in signal info. Setting HW_BRK_TYPE_PRIV_ALL will
also help to find scenarios when kernel accesses user memory.
Reported-by: Pedro Miraglia Franco de Carvalho <pedromfc@linux.ibm.com>
Suggested-by: Pedro Miraglia Franco de Carvalho <pedromfc@linux.ibm.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200902042945.129369-4-ravi.bangoria@linux.ibm.com
Vector load/store instructions are special because they are always
aligned. Thus unaligned EA needs to be aligned down before comparing
it with watch ranges. Otherwise we might consider valid event as
invalid.
Fixes: 74c6881019 ("powerpc/watchpoint: Prepare handler to handle more than one watchpoint")
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200902042945.129369-3-ravi.bangoria@linux.ibm.com
On p10 predecessors, watchpoint with quadword access is compared at
quadword length. If the watch range is doubleword or less than that
in a first half of quadword aligned 16 bytes, and if there is any
unaligned quadword access which will access only the 2nd half, the
handler should consider it as extraneous and emulate/single-step it
before continuing.
Fixes: 74c6881019 ("powerpc/watchpoint: Prepare handler to handle more than one watchpoint")
Reported-by: Pedro Miraglia Franco de Carvalho <pedromfc@linux.ibm.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200902042945.129369-2-ravi.bangoria@linux.ibm.com
Yunhai Zhang recently fixed a VGA software scrollback bug in commit
ebfdfeeae8 ("vgacon: Fix for missing check in scrollback handling"),
but that then made people look more closely at some of this code, and
there were more problems on the vgacon side, but also the fbcon software
scrollback.
We don't really have anybody who maintains this code - probably because
nobody actually _uses_ it any more. Sure, people still use both VGA and
the framebuffer consoles, but they are no longer the main user
interfaces to the kernel, and haven't been for decades, so these kinds
of extra features end up bitrotting and not really being used.
So rather than try to maintain a likely unused set of code, I'll just
aggressively remove it, and see if anybody even notices. Maybe there
are people who haven't jumped on the whole GUI badnwagon yet, and think
it's just a fad. And maybe those people use the scrollback code.
If that turns out to be the case, we can resurrect this again, once
we've found the sucker^Wmaintainer for it who actually uses it.
Reported-by: NopNop Nop <nopitydays@gmail.com>
Tested-by: Willy Tarreau <w@1wt.eu>
Cc: 张云海 <zhangyunhai@nsfocus.com>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
POWER secure guests (i.e., guests which use the Protected Execution
Facility) need to use SWIOTLB to be able to do I/O with the
hypervisor, but they don't need the SWIOTLB memory to be in low
addresses since the hypervisor doesn't have any addressing limitation.
This solves a SWIOTLB initialization problem we are seeing in secure
guests with 128 GB of RAM: they are configured with 4 GB of
crashkernel reserved memory, which leaves no space for SWIOTLB in low
addresses.
To do this, we use mostly the same code as swiotlb_init(), but
allocate the buffer using memblock_alloc() instead of
memblock_alloc_low().
Fixes: 2efbc58f15 ("powerpc/pseries/svm: Force SWIOTLB for secure guests")
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200818221126.391073-1-bauerman@linux.ibm.com
When we added the VDSO32 kconfig symbol, which controls building of
the 32-bit VDSO, we made it depend on CPU_BIG_ENDIAN (for 64-bit).
That was because back then COMPAT was always enabled for 64-bit, so
depending on it would have left the 32-bit VDSO always enabled, which
we didn't want.
But since then we have made COMPAT selectable, and off by default for
ppc64le, so VDSO32 should really depend on that.
For most people this makes no difference, none of the defconfigs
change, it's only if someone is building ppc64le with COMPAT=y, they
will now also get VDSO32. If they've enabled COMPAT in order to run
32-bit binaries they presumably also want the 32-bit VDSO.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20200908125850.407939-1-mpe@ellerman.id.au
The __phys_to_dma vs phys_to_dma distinction isn't exactly obvious. Try
to improve the situation by renaming __phys_to_dma to
phys_to_dma_unencryped, and not forcing architectures that want to
override phys_to_dma to actually provide __phys_to_dma.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
There is no harm in just always clearing the SME encryption bit, while
significantly simplifying the interface.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
The newly introduced 'perf_stats' attribute uses the default access
mode of 0444, allowing non-root users to access performance stats of
an nvdimm and potentially force the kernel into issuing a large number
of expensive hypercalls. Since the information exposed by this
attribute cannot be cached it is better to ward off access to this
attribute from users who don't need to access to these performance
statistics.
Hence update the access mode of 'perf_stats' attribute to be only
readable by root users.
Fixes: 2d02bf835e ("powerpc/papr_scm: Fetch nvdimm performance stats from PHYP")
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200907110540.21349-1-vaibhav@linux.ibm.com
Stop providing the possibility to override the address space using
set_fs() now that there is no need for that any more.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Provide __get_kernel_nofault and __put_kernel_nofault routines to
implement the maccess routines without messing with set_fs and without
opening up access to user space.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add a CONFIG_SET_FS option that is selected by architecturess that
implement set_fs, which is all of them initially. If the option is not
set stubs for routines related to overriding the address space are
provided so that architectures can start to opt out of providing set_fs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The ISA v3.1 the copy-paste facility has a new memory move functionality
which allows the copy buffer to be pasted to domestic memory (RAM) as
opposed to foreign memory (accelerator).
This means the POWER9 trick of avoiding the cp_abort on context switch if
the process had not mapped foreign memory does not work on POWER10. Do the
cp_abort unconditionally there.
KVM must also cp_abort on guest exit to prevent copy buffer state leaking
between contexts.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200825075535.224536-1-npiggin@gmail.com
It's not done anything for a long time. Save the percpu variable, and
emit a warning to remind users to not expect it to do anything.
This uses pr_warn_once instead of pr_warn_ratelimit as testing
'ppc64_cpu --smt=off' on a 24 core / 4 SMT system showed the warning
to be noisy, as the online/offline loop is slow.
Fixes: 3fa8cad82b ("powerpc/pseries/cpuidle: smt-snooze-delay cleanup.")
Cc: stable@vger.kernel.org # v3.14
Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200902000012.3440389-1-joel@jms.id.au
Often the firmware will guard out cores after a crash. This often
undesirable, and is not immediately noticeable.
This adds an informative message when a CPU device tree nodes are
marked bad in the device tree.
Signed-off-by: Joel Stanley <joel@jms.id.au>
[mpe: Use an eye-catcher that's less likely to get us in trouble]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190801051630.5804-1-joel@jms.id.au
On LoPAR "DMA Window Manipulation Calls", it's recommended to remove the
default DMA window for the device, before attempting to configure a DDW,
in order to make the maximum resources available for the next DDW to be
created.
This is a requirement for using DDW on devices in which hypervisor
allows only one DMA window.
If setting up a new DDW fails anywhere after the removal of this
default DMA window, it's needed to restore the default DMA window.
For this, an implementation of ibm,reset-pe-dma-windows rtas call is
needed:
Platforms supporting the DDW option starting with LoPAR level 2.7 implement
ibm,ddw-extensions. The first extension available (index 2) carries the
token for ibm,reset-pe-dma-windows rtas call, which is used to restore
the default DMA window for a device, if it has been deleted.
It does so by resetting the TCE table allocation for the PE to it's
boot time value, available in "ibm,dma-window" device tree node.
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
Tested-by: David Dai <zdai@linux.vnet.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200805030455.123024-5-leobras.c@gmail.com
Move the window-removing part of remove_ddw into a new function
(remove_dma_window), so it can be used to remove other DMA windows.
It's useful for removing DMA windows that don't create DIRECT64_PROPNAME
property, like the default DMA window from the device, which uses
"ibm,dma-window".
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
Tested-by: David Dai <zdai@linux.vnet.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200805030455.123024-4-leobras.c@gmail.com
>From LoPAR level 2.8, "ibm,ddw-extensions" index 3 can make the number of
outputs from "ibm,query-pe-dma-windows" go from 5 to 6.
This change of output size is meant to expand the address size of
largest_available_block PE TCE from 32-bit to 64-bit, which ends up
shifting page_size and migration_capable.
This ends up requiring the update of
ddw_query_response->largest_available_block from u32 to u64, and manually
assigning the values from the buffer into this struct, according to
output size.
Also, a routine was created for helping reading the ddw extensions as
suggested by LoPAR: First reading the size of the extension array from
index 0, checking if the property exists, and then returning it's value.
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
Tested-by: David Dai <zdai@linux.vnet.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200805030455.123024-3-leobras.c@gmail.com
Create defines to help handling ibm,ddw-applicable values, avoiding
confusion about the index of given operations.
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
Tested-by: David Dai <zdai@linux.vnet.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200805030455.123024-2-leobras.c@gmail.com
As of commit bdc48fa11e, scripts/checkpatch.pl now has a default line
length warning of 100 characters. The powerpc wrapper script was using
a length of 90 instead of 80 in order to make checkpatch less
restrictive, but now it's making it more restrictive instead.
I think it makes sense to just use the default value now.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200828020542.393022-1-ruscur@russell.cc
As of commit 147c05168f ("powerpc/boot: Add support for 64bit little
endian wrapper") the comment in the Makefile is misleading. The wrapper
packaging 64bit kernel may built as a 32 or 64 bit elf. Update the
comment to reflect this.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200825035147.3239-1-jniethe5@gmail.com
The last caller was removed in 2014 in commit fb5a515704 ("powerpc:
Remove platforms/wsp and associated pieces").
As Jordan noticed even though there are no callers, the code above in
fsl_secondary_thread_init() falls through into
generic_secondary_thread_init(). So we can remove the _GLOBAL but not
the body of the function.
However because fsl_secondary_thread_init() is inside #ifdef
CONFIG_PPC_BOOK3E, we can never reach the body of
generic_secondary_thread_init() unless CONFIG_PPC_BOOK3E is enabled,
so we can wrap the whole thing in a single #ifdef.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200819015704.1976364-1-mpe@ellerman.id.au
These annoy me every time I see them. Why are they here? They're not even
needed for 80cols compliance.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200818044557.135497-1-oohall@gmail.com
There are 2 problems with it:
1. "<" vs expected "<<"
2. the shift number is an IOMMU page number mask, not an address
mask as the IOMMU page shift is missing.
This did not hit us before f1565c24b5 ("powerpc: use the generic
dma_ops_bypass mode") because we had additional code to handle bypass
mask so this chunk (almost?) never executed.However there were
reports that aacraid does not work with "iommu=nobypass".
After f1565c24b5, aacraid (and probably others which call
dma_get_required_mask() before setting the mask) was unable to enable
64bit DMA and fall back to using IOMMU which was known not to work,
one of the problems is double free of an IOMMU page.
This fixes DMA for aacraid, both with and without "iommu=nobypass" in
the kernel command line. Verified with "stress-ng -d 4".
Fixes: 6a5c7be5e4 ("powerpc: Override dma_get_required_mask by platform hook and ops")
Cc: stable@vger.kernel.org # v3.2+
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200908015106.79661-1-aik@ozlabs.ru
The vdso linker script is preprocessed on demand.
Adding it to 'targets' is enough to include the .cmd file.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Greentime Hu <green.hu@gmail.com>
This patch fixes a sparse endianness warning by changing crc32 to
__le32 instead of u32:
CHECK ../arch/powerpc/crypto/crc-vpmsum_test.c
../arch/powerpc/crypto/crc-vpmsum_test.c:102:39: warning: cast from restricted __le32
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We found that callers of dma_get_seg_boundary mostly do an ALIGN
with page mask and then do a page shift to get number of pages:
ALIGN(boundary + 1, 1 << shift) >> shift
However, the boundary might be as large as ULONG_MAX, which means
that a device has no specific boundary limit. So either "+ 1" or
passing it to ALIGN() would potentially overflow.
According to kernel defines:
#define ALIGN_MASK(x, mask) (((x) + (mask)) & ~(mask))
#define ALIGN(x, a) ALIGN_MASK(x, (typeof(x))(a) - 1)
We can simplify the logic here into a helper function doing:
ALIGN(boundary + 1, 1 << shift) >> shift
= ALIGN_MASK(b + 1, (1 << s) - 1) >> s
= {[b + 1 + (1 << s) - 1] & ~[(1 << s) - 1]} >> s
= [b + 1 + (1 << s) - 1] >> s
= [b + (1 << s)] >> s
= (b >> s) + 1
This patch introduces and applies dma_get_seg_boundary_nr_pages()
as an overflow-free helper for the dma_get_seg_boundary() callers
to get numbers of pages. It also takes care of the NULL dev case
for non-DMA API callers.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Acked-by: Niklas Schnelle <schnelle@linux.ibm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Christoph Hellwig <hch@lst.de>
This reverts commit f2af201002.
It added a usage of cc-ldoption, but cc-ldoption was removed in commit
055efab312 ("kbuild: drop support for cc-ldoption").
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Similarly to what was done with XICS-on-XIVE and XIVE native KVM devices
with commit 5422e95103 ("KVM: PPC: Book3S HV: XIVE: Replace the 'destroy'
method by a 'release' method"), convert the historical XICS KVM device to
implement the 'release' method. This is needed to run nested guests with
an in-kernel IRQ chip. A typical POWER9 guest can select XICS or XIVE
during boot, which requires to be able to destroy and to re-create the
KVM device. Only the historical XICS KVM device is available under pseries
at the current time and it still uses the legacy 'destroy' method.
Switching to 'release' means that vCPUs might still be running when the
device is destroyed. In order to avoid potential use-after-free, the
kvmppc_xics structure is allocated on first usage and kept around until
the VM exits. The same pointer is used each time a KVM XICS device is
being created, but this is okay since we only have one per VM.
Clear the ICP of each vCPU with vcpu->mutex held. This ensures that the
next time the vCPU resumes execution, it won't be going into the XICS
code anymore.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Currently, using llvm-objtool, this script just silently succeeds without
actually do the intended checking. So this updates it to work properly.
Firstly, llvm-objdump does not add target symbol names to the end
of branches in its asm output, so we have to drop the branch to
__start_initialization_multiplatform using its address.
Secondly, v9 and 10 specify branch targets as .+<offset>, so we convert
those to actual addresses.
Thirdly, v10 and 11 error out on a vmlinux if given the -R option
complaining that it is "not a dynamic object". The -R does not make
any difference to the asm output, so remove it.
Lastly, v11 produces asm that is very similar to Gnu objtool (at least
as far as branches are concerned), so no further changes are necessary
to make it work.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200812081036.7969-3-sfr@canb.auug.org.au
This is considerably faster then parsing the objdump asm output. It will
also make the enabling of llvm-objdump a little easier.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200812081036.7969-2-sfr@canb.auug.org.au
If we can't find the address of __end_interrupts, then we still exit
successfully as that is the current behaviour.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200811140435.20957-8-sfr@canb.auug.org.au
Also start using sed -E and make all the separate expressions into a
single one with comments. Pull the stripping of condition registers
back into the sed command.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200811140435.20957-5-sfr@canb.auug.org.au
We don't use the raw hex instruction dump, so elide it and adjust the
following expressions.
Also use \s instead of [[:space:]] everywhere.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200811140435.20957-4-sfr@canb.auug.org.au
At memory hot-remove time we can retrieve an LMB's nid from its
corresponding memory_block. There is no need to store the nid
in multiple locations.
Note that lmb_to_memblock() uses find_memory_block() to get the
corresponding memory_block. As find_memory_block() runs in sub-linear
time this approach is negligibly slower than what we do at present.
In exchange for this lookup at hot-remove time we no longer need to
call memory_add_physaddr_to_nid() during drmem_init() for each LMB.
On powerpc, memory_add_physaddr_to_nid() is a linear search, so this
spares us an O(n^2) initialization during boot.
On systems with many LMBs that initialization overhead is palpable and
disruptive. For example, on a box with 249854 LMBs we're seeing
drmem_init() take upwards of 30 seconds to complete:
[ 53.721639] drmem: initializing drmem v2
[ 80.604346] watchdog: BUG: soft lockup - CPU#65 stuck for 23s! [swapper/0:1]
[ 80.604377] Modules linked in:
[ 80.604389] CPU: 65 PID: 1 Comm: swapper/0 Not tainted 5.6.0-rc2+ #4
[ 80.604397] NIP: c0000000000a4980 LR: c0000000000a4940 CTR: 0000000000000000
[ 80.604407] REGS: c0002dbff8493830 TRAP: 0901 Not tainted (5.6.0-rc2+)
[ 80.604412] MSR: 8000000002009033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 44000248 XER: 0000000d
[ 80.604431] CFAR: c0000000000a4a38 IRQMASK: 0
[ 80.604431] GPR00: c0000000000a4940 c0002dbff8493ac0 c000000001904400 c0003cfffffede30
[ 80.604431] GPR04: 0000000000000000 c000000000f4095a 000000000000002f 0000000010000000
[ 80.604431] GPR08: c0000bf7ecdb7fb8 c0000bf7ecc2d3c8 0000000000000008 c00c0002fdfb2001
[ 80.604431] GPR12: 0000000000000000 c00000001e8ec200
[ 80.604477] NIP [c0000000000a4980] hot_add_scn_to_nid+0xa0/0x3e0
[ 80.604486] LR [c0000000000a4940] hot_add_scn_to_nid+0x60/0x3e0
[ 80.604492] Call Trace:
[ 80.604498] [c0002dbff8493ac0] [c0000000000a4940] hot_add_scn_to_nid+0x60/0x3e0 (unreliable)
[ 80.604509] [c0002dbff8493b20] [c000000000087c10] memory_add_physaddr_to_nid+0x20/0x60
[ 80.604521] [c0002dbff8493b40] [c0000000010d4880] drmem_init+0x25c/0x2f0
[ 80.604530] [c0002dbff8493c10] [c000000000010154] do_one_initcall+0x64/0x2c0
[ 80.604540] [c0002dbff8493ce0] [c0000000010c4aa0] kernel_init_freeable+0x2d8/0x3a0
[ 80.604550] [c0002dbff8493db0] [c000000000010824] kernel_init+0x2c/0x148
[ 80.604560] [c0002dbff8493e20] [c00000000000b648] ret_from_kernel_thread+0x5c/0x74
[ 80.604567] Instruction dump:
[ 80.604574] 392918e8 e9490000 e90a000a e92a0000 80ea000c 1d080018 3908ffe8 7d094214
[ 80.604586] 7fa94040 419d00dc e9490010 714a0088 <2faa0008> 409e00ac e9490000 7fbe5040
[ 89.047390] drmem: 249854 LMB(s)
With a patched kernel on the same machine we're no longer seeing the
soft lockup. drmem_init() now completes in negligible time, even when
the LMB count is large.
Fixes: b2d3b5ee66 ("powerpc/pseries: Track LMB nid instead of using device tree")
Signed-off-by: Scott Cheloha <cheloha@linux.ibm.com>
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200811015115.63677-1-cheloha@linux.ibm.com
Nothing prevents flush_cache_instruction() from being writen in C.
Do it to improve readability and maintainability.
This function is only use by low level callers, it is not
intended to be used by module. Don't export it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f989eff8296800c427622c0985384148404e4f0b.1597384512.git.christophe.leroy@csgroup.eu
Nothing prevents flush_cache_instruction() from being writen in C.
Do it to improve readability and maintainability.
This function is very small and isn't called from assembly,
make it static inline in asm/cacheflush.h
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/93d93fc69b4b3ad3ceba2fc0756333c0c0245bb7.1597384512.git.christophe.leroy@csgroup.eu
The only callers of flush_instruction_cache() are:
arch/powerpc/kernel/swsusp_booke.S: bl flush_instruction_cache
arch/powerpc/mm/nohash/40x.c: flush_instruction_cache();
arch/powerpc/mm/nohash/44x.c: flush_instruction_cache();
arch/powerpc/mm/nohash/fsl_booke.c: flush_instruction_cache();
arch/powerpc/platforms/44x/machine_check.c: flush_instruction_cache();
arch/powerpc/platforms/44x/machine_check.c: flush_instruction_cache();
This function is not used by book3s/32, drop it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/50098f49877cea0f46730a9df82dcabf84160e4b.1597384512.git.christophe.leroy@csgroup.eu
The drmem lmb list can have hundreds of thousands of entries, and
unfortunately lookups take the form of linear searches. As long as
this is the case, traversals have the potential to monopolize the CPU
and provoke lockup reports, workqueue stalls, and the like unless
they explicitly yield.
Rather than placing cond_resched() calls within various
for_each_drmem_lmb() loop blocks in the code, put it in the iteration
expression of the loop macro itself so users can't omit it.
Introduce a drmem_lmb_next() iteration helper function which calls
cond_resched() at a regular interval during array traversal. Each
iteration of the loop in DLPAR code paths can involve around ten RTAS
calls which can each take up to 250us, so this ensures the check is
performed at worst every few milliseconds.
Fixes: 6c6ea53725 ("powerpc/mm: Separate ibm, dynamic-memory data from DT format")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200813151131.2070161-1-nathanl@linux.ibm.com
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe
function ("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Acked-by: Wolfram Sang <wsa@kernel.org>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200807152713.381588-1-steve@sk2.org
The H_GetPerformanceCounterInfo (GPCI) PHYP hypercall has a subcall,
Affinity_Domain_Info_By_Partition, which returns, among other things,
a "partition affinity score" for a given LPAR. This score, a value on
[0-100], represents the processor-memory affinity for the LPAR in
question. A score of 0 indicates the worst possible affinity while a
score of 100 indicates perfect affinity. The score can be used to
reason about performance.
This patch adds the score for the local LPAR to the lparcfg procfile
under a new 'partition_affinity_score' key.
Signed-off-by: Scott Cheloha <cheloha@linux.ibm.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Acked-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200727184605.2945095-2-cheloha@linux.ibm.com
The H_GetPerformanceCounterInfo (GPCI) hypercall input/output structs are
useful to modules outside of perf/, so move them into asm/hvcall.h to live
alongside the other powerpc hypercall structs.
Leave the perf-specific GPCI stuff in perf/hv-gpci.h.
Signed-off-by: Scott Cheloha <cheloha@linux.ibm.com>
Acked-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200727184605.2945095-1-cheloha@linux.ibm.com
Since commit identified below, the forward declaration of
struct irq_chip is useless (was struct hw_interrupt_type at that time)
Remove it, together with the associated comment.
Fixes: c0ad90a32f ("[PATCH] genirq: add ->retrigger() irq op to consolidate hw_irq_resend()")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/fbe58d27cf128d5fe581e4510ded8701858f268e.1596716328.git.christophe.leroy@csgroup.eu
The assembler says:
arch/powerpc/kernel/head_32.S:1095: Warning: invalid register expression
It's objecting to the use of r0 as the RA argument. That's because
when RA = 0 the literal value 0 is used, rather than the content of
r0, making the use of r0 in the source potentially confusing.
Fix it to use a literal 0, the generated code is identical.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2b69ac8e1cddff6f808fc7415907179eab4aae9e.1596693679.git.christophe.leroy@csgroup.eu
The .comment section doesn't belong in STABS_DEBUG. Split it out into a
new macro named ELF_DETAILS. This will gain other non-debug sections
that need to be accounted for when linking with --orphan-handling=warn.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: linux-arch@vger.kernel.org
Link: https://lore.kernel.org/r/20200821194310.3089815-5-keescook@chromium.org
- Prevent recursion by using raw_cpu_* operations
- Fixup the interrupt state in the cpu idle code to be consistent
- Push rcu_idle_enter/exit() invocations deeper into the idle path so
that the lock operations are inside the RCU watching sections
- Move trace_cpu_idle() into generic code so it's called before RCU goes
idle.
- Handle raw_local_irq* vs. local_irq* operations correctly
- Move the tracepoints out from under the lockdep recursion handling
which turned out to be fragile and inconsistent.
-----BEGIN PGP SIGNATURE-----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=Hgt6
-----END PGP SIGNATURE-----
Merge tag 'locking-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"A set of fixes for lockdep, tracing and RCU:
- Prevent recursion by using raw_cpu_* operations
- Fixup the interrupt state in the cpu idle code to be consistent
- Push rcu_idle_enter/exit() invocations deeper into the idle path so
that the lock operations are inside the RCU watching sections
- Move trace_cpu_idle() into generic code so it's called before RCU
goes idle.
- Handle raw_local_irq* vs. local_irq* operations correctly
- Move the tracepoints out from under the lockdep recursion handling
which turned out to be fragile and inconsistent"
* tag 'locking-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
lockdep,trace: Expose tracepoints
lockdep: Only trace IRQ edges
mips: Implement arch_irqs_disabled()
arm64: Implement arch_irqs_disabled()
nds32: Implement arch_irqs_disabled()
locking/lockdep: Cleanup
x86/entry: Remove unused THUNKs
cpuidle: Move trace_cpu_idle() into generic code
cpuidle: Make CPUIDLE_FLAG_TLB_FLUSHED generic
sched,idle,rcu: Push rcu_idle deeper into the idle path
cpuidle: Fixup IRQ state
lockdep: Use raw_cpu_*() for per-cpu variables
Revert our removal of PROT_SAO, at least one user expressed an interest in using
it on Power9. Instead don't allow it to be used in guests unless enabled
explicitly at compile time.
A fix for a crash introduced by a recent change to FP handling.
Revert a change to our idle code that left Power10 with no idle support.
One minor fix for the new scv system call path to set PPR.
Fix a crash in our "generic" PMU if branch stack events were enabled.
A fix for the IMC PMU, to correctly identify host kernel samples.
The ADB_PMU powermac code was found to be incompatible with VMAP_STACK, so make
them incompatible in Kconfig until the code can be fixed.
A build fix in drivers/video/fbdev/controlfb.c, and a documentation fix.
Thanks to:
Alexey Kardashevskiy, Athira Rajeev, Christophe Leroy, Giuseppe Sacco,
Madhavan Srinivasan, Milton Miller, Nicholas Piggin, Pratik Rajesh Sampat,
Randy Dunlap, Shawn Anastasio, Vaidyanathan Srinivasan.
-----BEGIN PGP SIGNATURE-----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=t+yB
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Revert our removal of PROT_SAO, at least one user expressed an
interest in using it on Power9. Instead don't allow it to be used in
guests unless enabled explicitly at compile time.
- A fix for a crash introduced by a recent change to FP handling.
- Revert a change to our idle code that left Power10 with no idle
support.
- One minor fix for the new scv system call path to set PPR.
- Fix a crash in our "generic" PMU if branch stack events were enabled.
- A fix for the IMC PMU, to correctly identify host kernel samples.
- The ADB_PMU powermac code was found to be incompatible with
VMAP_STACK, so make them incompatible in Kconfig until the code can
be fixed.
- A build fix in drivers/video/fbdev/controlfb.c, and a documentation
fix.
Thanks to Alexey Kardashevskiy, Athira Rajeev, Christophe Leroy,
Giuseppe Sacco, Madhavan Srinivasan, Milton Miller, Nicholas Piggin,
Pratik Rajesh Sampat, Randy Dunlap, Shawn Anastasio, Vaidyanathan
Srinivasan.
* tag 'powerpc-5.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/32s: Disable VMAP stack which CONFIG_ADB_PMU
Revert "powerpc/powernv/idle: Replace CPU feature check with PVR check"
powerpc/perf: Fix reading of MSR[HV/PR] bits in trace-imc
powerpc/perf: Fix crashes with generic_compat_pmu & BHRB
powerpc/64s: Fix crash in load_fp_state() due to fpexc_mode
powerpc/64s: scv entry should set PPR
Documentation/powerpc: fix malformed table in syscall64-abi
video: fbdev: controlfb: Fix build for COMPILE_TEST=y && PPC_PMAC=n
selftests/powerpc: Update PROT_SAO test to skip ISA 3.1
powerpc/64s: Disallow PROT_SAO in LPARs by default
Revert "powerpc/64s: Remove PROT_SAO support"
If the hypervisor doesn't support hugepages, the kernel ends up allocating a large
number of page table pages. The early page table allocation was wrongly
setting the max memblock limit to ppc64_rma_size with radix translation
which resulted in boot failure as shown below.
Kernel panic - not syncing:
early_alloc_pgtable: Failed to allocate 16777216 bytes align=0x1000000 nid=-1 from=0x0000000000000000 max_addr=0xffffffffffffffff
CPU: 0 PID: 0 Comm: swapper Not tainted 5.8.0-24.9-default+ #2
Call Trace:
[c0000000016f3d00] [c0000000007c6470] dump_stack+0xc4/0x114 (unreliable)
[c0000000016f3d40] [c00000000014c78c] panic+0x164/0x418
[c0000000016f3dd0] [c000000000098890] early_alloc_pgtable+0xe0/0xec
[c0000000016f3e60] [c0000000010a5440] radix__early_init_mmu+0x360/0x4b4
[c0000000016f3ef0] [c000000001099bac] early_init_mmu+0x1c/0x3c
[c0000000016f3f10] [c00000000109a320] early_setup+0x134/0x170
This was because the kernel was checking for the radix feature before we enable the
feature via mmu_features. This resulted in the kernel using hash restrictions on
radix.
Rework the early init code such that the kernel boot with memblock restrictions
as imposed by hash. At that point, the kernel still hasn't finalized the
translation the kernel will end up using.
We have three different ways of detecting radix.
1. dt_cpu_ftrs_scan -> used only in case of PowerNV
2. ibm,pa-features -> Used when we don't use cpu_dt_ftr_scan
3. CAS -> Where we negotiate with hypervisor about the supported translation.
We look at 1 or 2 early in the boot and after that, we look at the CAS vector to
finalize the translation the kernel will use. We also support a kernel command
line option (disable_radix) to switch to hash.
Update the memblock limit after mmu_early_init_devtree() if the kernel is going
to use radix translation. This forces some of the memblock allocations we do before
mmu_early_init_devtree() to be within the RMA limit.
Fixes: 2bfd65e45e ("powerpc/mm/radix: Add radix callbacks for early init routines")
Reported-by: Shirisha Ganta <shiganta@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200828100852.426575-1-aneesh.kumar@linux.ibm.com
cpuidle stop state implementation has minor optimizations for P10
where hardware preserves more SPR registers compared to P9. The
current P9 driver works for P10, although does few extra
save-restores. P9 driver can provide the required power management
features like SMT thread folding and core level power savings on a P10
platform.
Until the P10 stop driver is available, revert the commit which allows
for only P9 systems to utilize cpuidle and blocks all idle stop states
for P10. CPU idle states are enabled and tested on the P10 platform
with this fix.
This reverts commit 8747bf36f3.
Fixes: 8747bf36f3 ("powerpc/powernv/idle: Replace CPU feature check with PVR check")
Signed-off-by: Pratik Rajesh Sampat <psampat@linux.ibm.com>
Reviewed-by: Vaidyanathan Srinivasan <svaidy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200826082918.89306-1-psampat@linux.ibm.com
IMC trace-mode uses MSR[HV/PR] bits to set the cpumode for the
instruction pointer captured in each sample. The bits are fetched from
the third double word of the trace record. Reading third double word
from IMC trace record should use be64_to_cpu() along with READ_ONCE
inorder to fetch correct MSR[HV/PR] bits. Patch addresses this change.
Currently we are using PERF_RECORD_MISC_HYPERVISOR as cpumode if MSR
HV is 1 and PR is 0 which means the address is from host counter. But
using PERF_RECORD_MISC_HYPERVISOR for host counter data will fail to
resolve the address -> symbol during "perf report" because perf tools
side uses PERF_RECORD_MISC_KERNEL to represent the host counter data.
Therefore, fix the trace imc sample data to use
PERF_RECORD_MISC_KERNEL as cpumode for host kernel information.
Fixes: 77ca3951cc ("powerpc/perf: Add kernel support for new MSR[HV PR] bits in trace-imc")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1598424029-1662-1-git-send-email-atrajeev@linux.vnet.ibm.com
The bhrb_filter_map ("The Branch History Rolling Buffer") callback is
only defined in raw CPUs' power_pmu structs. The "architected" CPUs
use generic_compat_pmu, which does not have this callback, and crashes
occur if a user tries to enable branch stack for an event.
This add a NULL pointer check for bhrb_filter_map() which behaves as
if the callback returned an error.
This does not add the same check for config_bhrb() as the only caller
checks for cpuhw->bhrb_users which remains zero if bhrb_filter_map==0.
Fixes: be80e758d0 ("powerpc/perf: Add generic compat mode pmu driver")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200602025612.62707-1-aik@ozlabs.ru
The recent commit 01eb01877f ("powerpc/64s: Fix restore_math
unnecessarily changing MSR") changed some of the handling of floating
point/vector restore.
In particular it caused current->thread.fpexc_mode to be copied into
the current MSR (via msr_check_and_set()), rather than just into
regs->msr (which is moved into MSR on return to userspace).
This can lead to a crash in the kernel if we take a floating point
exception when restoring FPSCR:
Oops: Exception in kernel mode, sig: 8 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV
Modules linked in:
CPU: 3 PID: 101213 Comm: ld64.so.2 Not tainted 5.9.0-rc1-00098-g18445bf405cb-dirty #9
NIP: c00000000000fbb4 LR: c00000000001a7ac CTR: c000000000183570
REGS: c0000016b7cfb3b0 TRAP: 0700 Not tainted (5.9.0-rc1-00098-g18445bf405cb-dirty)
MSR: 900000000290b933 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 44002444 XER: 00000000
CFAR: c00000000001a7a8 IRQMASK: 1
GPR00: c00000000001ae40 c0000016b7cfb640 c0000000011b7f00 c000001542a0f740
GPR04: c000001542a0f720 c000001542a0eb00 0000000000000900 c000001542a0eb00
GPR08: 000000000000000a 0000000000002000 9000000000009033 0000000000000000
GPR12: 0000000000004000 c0000017ffffd900 0000000000000001 c000000000df5a58
GPR16: c000000000e19c18 c0000000010e1123 0000000000000001 c000000000e1a638
GPR20: 0000000000000000 c0000000044b1d00 0000000000000000 c000001542a0f2a0
GPR24: 00000016c7fe0000 c000001542a0f720 c000000001c93da0 c000000000fe5f28
GPR28: c000001542a0f720 0000000000800000 c0000016b7cfbe90 0000000002802900
NIP load_fp_state+0x4/0x214
LR restore_math+0x17c/0x1f0
Call Trace:
0xc0000016b7cfb680 (unreliable)
__switch_to+0x330/0x460
__schedule+0x318/0x920
schedule+0x74/0x140
schedule_timeout+0x318/0x3f0
wait_for_completion+0xc8/0x210
call_usermodehelper_exec+0x234/0x280
do_coredump+0xedc/0x13c0
get_signal+0x1d4/0xbe0
do_notify_resume+0x1a0/0x490
interrupt_exit_user_prepare+0x1c4/0x230
interrupt_return+0x14/0x1c0
Instruction dump:
ebe10168 e88101a0 7c8ff120 382101e0 e8010010 7c0803a6 4e800020 790605c4
782905c4 7c0008a8 7c0008a8 c8030200 <fffe058e> 48000088 c8030000 c8230010
Fix it by only loading the fpexc_mode value into regs->msr.
Also add a comment to explain that although VSX is subject to the
value of fpexc_mode, we don't have to handle that separately because
we only allow VSX to be enabled if FP is also enabled.
Fixes: 01eb01877f ("powerpc/64s: Fix restore_math unnecessarily changing MSR")
Reported-by: Milton Miller <miltonm@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Link: https://lore.kernel.org/r/20200825093424.3967813-1-mpe@ellerman.id.au
Kernel entry sets PPR to HMT_MEDIUM by convention. The scv entry
path missed this.
Fixes: 7fa95f9ada ("powerpc/64s: system call support for scv/rfscv instructions")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200825075309.224184-1-npiggin@gmail.com
Problem:
raw_local_irq_save(); // software state on
local_irq_save(); // software state off
...
local_irq_restore(); // software state still off, because we don't enable IRQs
raw_local_irq_restore(); // software state still off, *whoopsie*
existing instances:
- lock_acquire()
raw_local_irq_save()
__lock_acquire()
arch_spin_lock(&graph_lock)
pv_wait() := kvm_wait() (same or worse for Xen/HyperV)
local_irq_save()
- trace_clock_global()
raw_local_irq_save()
arch_spin_lock()
pv_wait() := kvm_wait()
local_irq_save()
- apic_retrigger_irq()
raw_local_irq_save()
apic->send_IPI() := default_send_IPI_single_phys()
local_irq_save()
Possible solutions:
A) make it work by enabling the tracing inside raw_*()
B) make it work by keeping tracing disabled inside raw_*()
C) call it broken and clean it up now
Now, given that the only reason to use the raw_* variant is because you don't
want tracing. Therefore A) seems like a weird option (although it can be done).
C) is tempting, but OTOH it ends up converting a _lot_ of code to raw just
because there is one raw user, this strips the validation/tracing off for all
the other users.
So we pick B) and declare any code that ends up doing:
raw_local_irq_save()
local_irq_save()
lockdep_assert_irqs_disabled();
broken. AFAICT this problem has existed forever, the only reason it came
up is because commit: 859d069ee1 ("lockdep: Prepare for NMI IRQ
state tracking") changed IRQ tracing vs lockdep recursion and the
first instance is fairly common, the other cases hardly ever happen.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[rewrote changelog]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Marco Elver <elver@google.com>
Link: https://lkml.kernel.org/r/20200723105615.1268126-1-npiggin@gmail.com
Building with W=1 results in the following warning:
In file included from arch/powerpc/platforms/powernv/vas-fault.c:16:
./arch/powerpc/include/asm/icswx.h:159:1: error: alignment 1 of ‘struct
coprocessor_request_block’ is less than 16 [-Werror=packed-not-aligned]
159 | } __packed;
| ^
./arch/powerpc/include/asm/icswx.h:159:1: error: alignment 1 of ‘struct
coprocessor_request_block’ is less than 16 [-Werror=packed-not-aligned]
./arch/powerpc/include/asm/icswx.h:159:1: error: alignment 1 of ‘struct
coprocessor_request_block’ is less than 16 [-Werror=packed-not-aligned]
./arch/powerpc/include/asm/icswx.h:159:1: error: alignment 1 of ‘struct
coprocessor_request_block’ is less than 16 [-Werror=packed-not-aligned]
cc1: all warnings being treated as errors
This happens because coprocessor_request_block includes several
sub-structures with an alignment specified using the __aligned(XX)
attribute. The problem comes from coprocessor_request_block having the
__packed attribute. Packing the structure causes the preferred alignment of
the nested structures to be ignored and we get the warnings as a result.
This isn't a problem in practice since the struct is defined with explicit
padding in the form of reserved fields, but we'd like to get rid of the
spurious warnings. The simplest solution is to remove the packed attribute
and use a BUILD_BUG_ON() to ensure the struct is the correct (expected by
HW) size compile time.
Also add a __aligned(128) to the request block structure since Book4 for P8
suggests the HW requires it to be aligned to a 128 byte boundary. There's a
similar requirement for P9 since the COPY and PASTE instructions used to
invoke VAS/NX accelerators operates on a cache line boundary.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200804005410.146094-7-oohall@gmail.com
Comments opening with /** are parsed by kerneldoc and this causes the
following warning to be printed:
arch/powerpc/platforms/powernv/opal-prd.c:31: warning: cannot understand
function prototype: 'struct opal_prd_msg_queue_item '
opal_prd_mesg_queue_item is an internal data structure so there's no real
need for it to be documented at all. Fix up the comment to squash the
warning.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200804005410.146094-5-oohall@gmail.com
There's a few scattered in the powernv platform.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200804005410.146094-4-oohall@gmail.com
The asm/powernv.h header provides prototypes for functions which need to be
called by non-powernv platform code. Also include it in the powernv.h
that's local to the platform directory to squash some warnings about
non-static functions missing prototypes.
Also include powernv.h since from opal-memcons.c since it has the
prototypes for the memcons wrangling functions which are used for the opal
and ultravisor msglog.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200804005410.146094-3-oohall@gmail.com
When building with W=1 we get the following warning:
arch/powerpc/platforms/powernv/smp.c: In function ‘pnv_smp_cpu_kill_self’:
arch/powerpc/platforms/powernv/smp.c:276:16: error: suggest braces around
empty body in an ‘if’ statement [-Werror=empty-body]
276 | cpu, srr1);
| ^
cc1: all warnings being treated as errors
The full context is this block:
if (srr1 && !generic_check_cpu_restart(cpu))
DBG("CPU%d Unexpected exit while offline srr1=%lx!\n",
cpu, srr1);
When building with DEBUG undefined DBG() expands to nothing and GCC emits
the warning due to the lack of braces around an empty statement.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200804005410.146094-2-oohall@gmail.com
Now that we are handling vmemmap list allocation failure correctly, don't
WARN in section deactivate when we don't find a mapping vmemmap list entry.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200731113500.248306-2-aneesh.kumar@linux.ibm.com
If we fail to allocate vmemmap list, we don't keep track of allocated
vmemmap block buf. Hence on section deactivate we skip vmemmap block
buf free. This results in memory leak.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200731113500.248306-1-aneesh.kumar@linux.ibm.com
Fix gcc '-Wunused-but-set-variable' warning:
arch/powerpc/platforms/powernv/pci-ioda.c: In function pnv_ioda_configure_pe:
arch/powerpc/platforms/powernv/pci-ioda.c:867:18: warning: variable parent set but not used [-Wunused-but-set-variable]
It is not used since commit b131a8425c ("powerpc/powernv:
Set PELTV for compound PEs")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1574144074-142032-6-git-send-email-zhengbin13@huawei.com
Fix gcc '-Wunused-but-set-variable' warning:
arch/powerpc/perf/imc-pmu.c: In function trace_imc_event_init:
arch/powerpc/perf/imc-pmu.c:1292:22: warning: variable target set but not used [-Wunused-but-set-variable]
It is introduced by commit 012ae24484 ("powerpc/perf:
Trace imc PMU functions"), but never used, so remove it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1574144074-142032-3-git-send-email-zhengbin13@huawei.com
Fix gcc '-Wunused-but-set-variable' warning:
arch/powerpc/kernel/fadump.c: In function fadump_update_elfcore_header:
arch/powerpc/kernel/fadump.c:790:17: warning: variable elf set but not used [-Wunused-but-set-variable]
It is introduced by commit ebaeb5ae24 ("fadump:
Convert firmware-assisted cpu state dump data into elf notes."),
but never used, so remove it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1574144074-142032-2-git-send-email-zhengbin13@huawei.com
Since the interrupt pin for RTC DS1339 is not connected
to the CPU on T1024RDB, remove the interrupt property
from the device tree.
This also fix the following warning for hwclock.util-linux:
$ hwclock.util-linux
hwclock.util-linux: select() to /dev/rtc0
to wait for clock tick timed out
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200527034228.23793-2-biwen.li@oss.nxp.com
Since the interrupt pin for RTC DS1374 is not connected
to the CPU on T4240RDB, remove the interrupt property
from the device tree.
This also fix the following warning for hwclock.util-linux:
$ hwclock.util-linux
hwclock.util-linux: select() to /dev/rtc0
to wait for clock tick timed out
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200527034228.23793-1-biwen.li@oss.nxp.com
We now allocate interrupts through xive directly.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200403153838.29224-5-fbarrat@linux.ibm.com
Both of_find_compatible_node() and of_find_node_by_type() will return
a refcounted node on success - thus for the success path the node must
be explicitly released with a of_node_put().
Fixes: 0b05ac6e24 ("powerpc/xics: Rewrite XICS driver")
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1530691407-3991-1-git-send-email-hofrat@osadl.org
The call to of_find_compatible_node() returns a node pointer with
refcount incremented thus it must be explicitly decremented here
before returning.
Fixes: a489043f46 ("powerpc/pseries: Implement arch_get_random_long() based on H_RANDOM")
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1530522496-14816-1-git-send-email-hofrat@osadl.org
Since migration of guests using SAO to ISA 3.1 hosts may cause issues,
disable PROT_SAO in LPARs by default and introduce a new Kconfig option
PPC_PROT_SAO_LPAR to allow users to enable it if desired.
Signed-off-by: Shawn Anastasio <shawn@anastas.io>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200821185558.35561-3-shawn@anastas.io
This reverts commit 5c9fa16e8a.
Since PROT_SAO can still be useful for certain classes of software,
reintroduce it. Concerns about guest migration for LPARs using SAO
will be addressed next.
Signed-off-by: Shawn Anastasio <shawn@anastas.io>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200821185558.35561-2-shawn@anastas.io
Add perf support for emitting extended registers for power10.
A fix for CPU hotplug on pseries, where on large/loaded systems we may not wait
long enough for the CPU to be offlined, leading to crashes.
Addition of a raw cputable entry for Power10, which is not required to boot, but
is required to make our PMU setup work correctly in guests.
Three fixes for the recent changes on 32-bit Book3S to move modules into their
own segment for strict RWX.
A fix for a recent change in our powernv PCI code that could lead to crashes.
A change to our perf interrupt accounting to avoid soft lockups when using some
events, found by syzkaller.
A change in the way we handle power loss events from the hypervisor on pseries.
We no longer immediately shut down if we're told we're running on a UPS.
A few other minor fixes.
Thanks to:
Alexey Kardashevskiy, Andreas Schwab, Aneesh Kumar K.V, Anju T Sudhakar,
Athira Rajeev, Christophe Leroy, Frederic Barrat, Greg Kurz, Kajol Jain,
Madhavan Srinivasan, Michael Neuling, Michael Roth, Nageswara R Sastry, Oliver
O'Halloran, Thiago Jung Bauermann, Vaidyanathan Srinivasan, Vasant Hegde.
-----BEGIN PGP SIGNATURE-----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=sdJ1
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Add perf support for emitting extended registers for power10.
- A fix for CPU hotplug on pseries, where on large/loaded systems we
may not wait long enough for the CPU to be offlined, leading to
crashes.
- Addition of a raw cputable entry for Power10, which is not required
to boot, but is required to make our PMU setup work correctly in
guests.
- Three fixes for the recent changes on 32-bit Book3S to move modules
into their own segment for strict RWX.
- A fix for a recent change in our powernv PCI code that could lead to
crashes.
- A change to our perf interrupt accounting to avoid soft lockups when
using some events, found by syzkaller.
- A change in the way we handle power loss events from the hypervisor
on pseries. We no longer immediately shut down if we're told we're
running on a UPS.
- A few other minor fixes.
Thanks to Alexey Kardashevskiy, Andreas Schwab, Aneesh Kumar K.V, Anju T
Sudhakar, Athira Rajeev, Christophe Leroy, Frederic Barrat, Greg Kurz,
Kajol Jain, Madhavan Srinivasan, Michael Neuling, Michael Roth,
Nageswara R Sastry, Oliver O'Halloran, Thiago Jung Bauermann,
Vaidyanathan Srinivasan, Vasant Hegde.
* tag 'powerpc-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/perf/hv-24x7: Move cpumask file to top folder of hv-24x7 driver
powerpc/32s: Fix module loading failure when VMALLOC_END is over 0xf0000000
powerpc/pseries: Do not initiate shutdown when system is running on UPS
powerpc/perf: Fix soft lockups due to missed interrupt accounting
powerpc/powernv/pci: Fix possible crash when releasing DMA resources
powerpc/pseries/hotplug-cpu: wait indefinitely for vCPU death
powerpc/32s: Fix is_module_segment() when MODULES_VADDR is defined
powerpc/kasan: Fix KASAN_SHADOW_START on BOOK3S_32
powerpc/fixmap: Fix the size of the early debug area
powerpc/pkeys: Fix build error with PPC_MEM_KEYS disabled
powerpc/kernel: Cleanup machine check function declarations
powerpc: Add POWER10 raw mode cputable entry
powerpc/perf: Add extended regs support for power10 platform
powerpc/perf: Add support for outputting extended regs in perf intr_regs
powerpc: Fix P10 PVR revision in /proc/cpuinfo for SMT4 cores
* selftests fix for new binutils
* MMU notifier fix for arm64
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl9ARnoUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroP2YAf/dgLrPm4y4jxm7Aiz3/txqrHEwogT
ZtvnzqUPb6+vkFrkop8QMOPw7A8NCfkn3/6sWbyUN5ObgOG1pxKyPraeN3ZdsDoR
KGwv6P0dKgI8B4UuGEMe9GazXv+oOv8+bSUJnE+HZiUHzJKlX4HJbxDwUhvSSatY
qYCZb/Uzqundh79TYULa7oI1/3F15A2J1zQPe4QgkToH9tsVB8PVfkH5uPJPp64M
DTm5+qgwwsBULFaAuuo3FTs9f3pWJxn8GOuico1Sm+RnR53mhbUJggUfFzP0rwzZ
Emevunje5r1rluFs+JWeNtflGH0gI4CLak7jvlOOBjrNb5XJgUSbzLXxkA==
=Jwic
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
- PAE and PKU bugfixes for x86
- selftests fix for new binutils
- MMU notifier fix for arm64
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: arm64: Only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is not set
KVM: Pass MMU notifier range flags to kvm_unmap_hva_range()
kvm: x86: Toggling CR4.PKE does not load PDPTEs in PAE mode
kvm: x86: Toggling CR4.SMAP does not load PDPTEs in PAE mode
KVM: x86: fix access code passed to gva_to_gpa
selftests: kvm: Use a shorter encoding to clear RAX
The 'flags' field of 'struct mmu_notifier_range' is used to indicate
whether invalidate_range_{start,end}() are permitted to block. In the
case of kvm_mmu_notifier_invalidate_range_start(), this field is not
forwarded on to the architecture-specific implementation of
kvm_unmap_hva_range() and therefore the backend cannot sensibly decide
whether or not to block.
Add an extra 'flags' parameter to kvm_unmap_hva_range() so that
architectures are aware as to whether or not they are permitted to block.
Cc: <stable@vger.kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <20200811102725.7121-2-will@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 792f73f747 ("powerpc/hv-24x7: Add sysfs files inside hv-24x7
device to show cpumask") added cpumask file as part of hv-24x7 driver
inside the interface folder. The cpumask file is supposed to be in the
top folder of the PMU driver in order to make hotplug work.
This patch fixes that issue and creates new group 'cpumask_attr_group'
to add cpumask file and make sure it added in top folder.
command:# cat /sys/devices/hv_24x7/cpumask
0
Fixes: 792f73f747 ("powerpc/hv-24x7: Add sysfs files inside hv-24x7 device to show cpumask")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200821080610.123997-1-kjain@linux.ibm.com
In is_module_segment(), when VMALLOC_END is over 0xf0000000,
ALIGN(VMALLOC_END, SZ_256M) has value 0.
In that case, addr >= ALIGN(VMALLOC_END, SZ_256M) is always
true then is_module_segment() always returns false.
Use (ALIGN(VMALLOC_END, SZ_256M) - 1) which will have
value 0xffffffff and will be suitable for the comparison.
Fixes: c496433197 ("powerpc/32s: Only leave NX unset on segments used for modules")
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/09fc73fe9c7423c6b4cf93f93df9bb0ed8eefab5.1597994047.git.christophe.leroy@csgroup.eu
... and get rid of the pointless fallback in the wrappers. On error it used
to zero the unwritten area and calculate the csum of the entire thing. Not
wanting to do it in assembler part had been very reasonable; doing that in
the first place, OTOH... In case of an error the caller discards the data
we'd copied, along with whatever checksum it might've had.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
All callers of these primitives will
* discard anything we might've copied in case of error
* ignore the csum value in case of error
* always pass 0xffffffff as the initial sum, so the
resulting csum value (in case of success, that is) will never be 0.
That suggest the following calling conventions:
* don't pass err_ptr - just return 0 on error.
* don't bother with zeroing destination, etc. in case of error
* don't pass the initial sum - just use 0xffffffff.
This commit does the minimal conversion in the instances of csum_and_copy_...();
the changes of actual asm code behind them are done later in the series.
Note that this asm code is often shared with csum_partial_copy_nocheck();
the difference is that csum_partial_copy_nocheck() passes 0 for initial
sum while csum_and_copy_..._user() pass 0xffffffff. Fortunately, we are
free to pass 0xffffffff in all cases and subsequent patches will use that
freedom without any special comments.
A part that could be split off: parisc and uml/i386 claimed to have
csum_and_copy_to_user() instances of their own, but those were identical
to the generic one, so we simply drop them. Not sure if it's worth
a separate commit...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
It's always 0. Note that we theoretically could use ~0U as well -
result will be the same modulo 0xffff, _if_ the damn thing did the
right thing for any value of initial sum; later we'll make use of
that when convenient.
However, unlike csum_and_copy_..._user(), there are instances that
did not work for arbitrary initial sums; c6x is one such.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
quite a few architectures have the same csum_partial_copy_nocheck() -
simply memcpy() the data and then return the csum of the copy.
hexagon, parisc, ia64, s390, um: explicitly spelled out that way.
arc, arm64, csky, h8300, m68k/nommu, microblaze, mips/GENERIC_CSUM, nds32,
nios2, openrisc, riscv, unicore32: end up picking the same thing spelled
out in lib/checksum.h (with varying amounts of perversions along the way).
everybody else (alpha, arm, c6x, m68k/mmu, mips/!GENERIC_CSUM, powerpc,
sh, sparc, x86, xtensa) have non-generic variants. For all except c6x
the declaration is in their asm/checksum.h. c6x uses the wrapper
from asm-generic/checksum.h that would normally lead to the lib/checksum.h
instance, but in case of c6x we end up using an asm function from arch/c6x
instead.
Screw that mess - have architectures with private instances define
_HAVE_ARCH_CSUM_AND_COPY in their asm/checksum.h and have the default
one right in net/checksum.h conditional on _HAVE_ARCH_CSUM_AND_COPY
*not* defined.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
As per PAPR we have to look for both EPOW sensor value and event
modifier to identify the type of event and take appropriate action.
In LoPAPR v1.1 section 10.2.2 includes table 136 "EPOW Action Codes":
SYSTEM_SHUTDOWN 3
The system must be shut down. An EPOW-aware OS logs the EPOW error
log information, then schedules the system to be shut down to begin
after an OS defined delay internal (default is 10 minutes.)
Then in section 10.3.2.2.8 there is table 146 "Platform Event Log
Format, Version 6, EPOW Section", which includes the "EPOW Event
Modifier":
For EPOW sensor value = 3
0x01 = Normal system shutdown with no additional delay
0x02 = Loss of utility power, system is running on UPS/Battery
0x03 = Loss of system critical functions, system should be shutdown
0x04 = Ambient temperature too high
All other values = reserved
We have a user space tool (rtas_errd) on LPAR to monitor for
EPOW_SHUTDOWN_ON_UPS. Once it gets an event it initiates shutdown
after predefined time. It also starts monitoring for any new EPOW
events. If it receives "Power restored" event before predefined time
it will cancel the shutdown. Otherwise after predefined time it will
shutdown the system.
Commit 79872e3546 ("powerpc/pseries: All events of
EPOW_SYSTEM_SHUTDOWN must initiate shutdown") changed our handling of
the "on UPS/Battery" case, to immediately shutdown the system. This
breaks existing setups that rely on the userspace tool to delay
shutdown and let the system run on the UPS.
Fixes: 79872e3546 ("powerpc/pseries: All events of EPOW_SYSTEM_SHUTDOWN must initiate shutdown")
Cc: stable@vger.kernel.org # v4.0+
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
[mpe: Massage change log and add PAPR references]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200820061844.306460-1-hegdevasant@linux.vnet.ibm.com
Performance monitor interrupt handler checks if any counter has
overflown and calls record_and_restart() in core-book3s which invokes
perf_event_overflow() to record the sample information. Apart from
creating sample, perf_event_overflow() also does the interrupt and
period checks via perf_event_account_interrupt().
Currently we record information only if the SIAR (Sampled Instruction
Address Register) valid bit is set (using siar_valid() check) and
hence the interrupt check.
But it is possible that we do sampling for some events that are not
generating valid SIAR, and hence there is no chance to disable the
event if interrupts are more than max_samples_per_tick. This leads to
soft lockup.
Fix this by adding perf_event_account_interrupt() in the invalid SIAR
code path for a sampling event. ie if SIAR is invalid, just do
interrupt check and don't record the sample information.
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1596717992-7321-1-git-send-email-atrajeev@linux.vnet.ibm.com
The header file algapi.h includes skbuff.h unnecessarily since
all we need is a forward declaration for struct sk_buff. This
patch removes that inclusion.
Unfortunately skbuff.h pulls in a lot of things and drivers over
the years have come to rely on it so this patch adds a lot of
missing inclusions that result from this.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix a typo introduced during recent code cleanup, which could lead to
silently not freeing resources or an oops message (on PCI hotplug or
CAPI reset).
Only impacts ioda2, the code path for ioda1 is correct.
Fixes: 01e12629af ("powerpc/powernv/pci: Add explicit tracking of the DMA setup state")
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200819130741.16769-1-fbarrat@linux.ibm.com
For a power9 KVM guest with XIVE enabled, running a test loop
where we hotplug 384 vcpus and then unplug them, the following traces
can be seen (generally within a few loops) either from the unplugged
vcpu:
cpu 65 (hwid 65) Ready to die...
Querying DEAD? cpu 66 (66) shows 2
list_del corruption. next->prev should be c00a000002470208, but was c00a000002470048
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:56!
Oops: Exception in kernel mode, sig: 5 [#1]
LE SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: fuse nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 ...
CPU: 66 PID: 0 Comm: swapper/66 Kdump: loaded Not tainted 4.18.0-221.el8.ppc64le #1
NIP: c0000000007ab50c LR: c0000000007ab508 CTR: 00000000000003ac
REGS: c0000009e5a17840 TRAP: 0700 Not tainted (4.18.0-221.el8.ppc64le)
MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 28000842 XER: 20040000
...
NIP __list_del_entry_valid+0xac/0x100
LR __list_del_entry_valid+0xa8/0x100
Call Trace:
__list_del_entry_valid+0xa8/0x100 (unreliable)
free_pcppages_bulk+0x1f8/0x940
free_unref_page+0xd0/0x100
xive_spapr_cleanup_queue+0x148/0x1b0
xive_teardown_cpu+0x1bc/0x240
pseries_mach_cpu_die+0x78/0x2f0
cpu_die+0x48/0x70
arch_cpu_idle_dead+0x20/0x40
do_idle+0x2f4/0x4c0
cpu_startup_entry+0x38/0x40
start_secondary+0x7bc/0x8f0
start_secondary_prolog+0x10/0x14
or on the worker thread handling the unplug:
pseries-hotplug-cpu: Attempting to remove CPU <NULL>, drc index: 1000013a
Querying DEAD? cpu 314 (314) shows 2
BUG: Bad page state in process kworker/u768:3 pfn:95de1
cpu 314 (hwid 314) Ready to die...
page:c00a000002577840 refcount:0 mapcount:-128 mapping:0000000000000000 index:0x0
flags: 0x5ffffc00000000()
raw: 005ffffc00000000 5deadbeef0000100 5deadbeef0000200 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffff7f 0000000000000000
page dumped because: nonzero mapcount
Modules linked in: kvm xt_CHECKSUM ipt_MASQUERADE xt_conntrack ...
CPU: 0 PID: 548 Comm: kworker/u768:3 Kdump: loaded Not tainted 4.18.0-224.el8.bz1856588.ppc64le #1
Workqueue: pseries hotplug workque pseries_hp_work_fn
Call Trace:
dump_stack+0xb0/0xf4 (unreliable)
bad_page+0x12c/0x1b0
free_pcppages_bulk+0x5bc/0x940
page_alloc_cpu_dead+0x118/0x120
cpuhp_invoke_callback.constprop.5+0xb8/0x760
_cpu_down+0x188/0x340
cpu_down+0x5c/0xa0
cpu_subsys_offline+0x24/0x40
device_offline+0xf0/0x130
dlpar_offline_cpu+0x1c4/0x2a0
dlpar_cpu_remove+0xb8/0x190
dlpar_cpu_remove_by_index+0x12c/0x150
dlpar_cpu+0x94/0x800
pseries_hp_work_fn+0x128/0x1e0
process_one_work+0x304/0x5d0
worker_thread+0xcc/0x7a0
kthread+0x1ac/0x1c0
ret_from_kernel_thread+0x5c/0x80
The latter trace is due to the following sequence:
page_alloc_cpu_dead
drain_pages
drain_pages_zone
free_pcppages_bulk
where drain_pages() in this case is called under the assumption that
the unplugged cpu is no longer executing. To ensure that is the case,
and early call is made to __cpu_die()->pseries_cpu_die(), which runs a
loop that waits for the cpu to reach a halted state by polling its
status via query-cpu-stopped-state RTAS calls. It only polls for 25
iterations before giving up, however, and in the trace above this
results in the following being printed only .1 seconds after the
hotplug worker thread begins processing the unplug request:
pseries-hotplug-cpu: Attempting to remove CPU <NULL>, drc index: 1000013a
Querying DEAD? cpu 314 (314) shows 2
At that point the worker thread assumes the unplugged CPU is in some
unknown/dead state and procedes with the cleanup, causing the race
with the XIVE cleanup code executed by the unplugged CPU.
Fix this by waiting indefinitely, but also making an effort to avoid
spurious lockup messages by allowing for rescheduling after polling
the CPU status and printing a warning if we wait for longer than 120s.
Fixes: eac1e731b5 ("powerpc/xive: guest exploitation of the XIVE interrupt controller")
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Tested-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
[mpe: Trim oopses in change log slightly for readability]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200811161544.10513-1-mdroth@linux.vnet.ibm.com
On BOOK3S_32, when we have modules and strict kernel RWX, modules
are not in vmalloc space but in a dedicated segment that is
below PAGE_OFFSET.
So KASAN_SHADOW_START must take it into account.
MODULES_VADDR can't be used because it is not defined yet
in kasan.h
Fixes: 6ca055322d ("powerpc/32s: Use dedicated segment for modules with STRICT_KERNEL_RWX")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/6eddca2d5611fd57312a88eae31278c87a8fc99d.1596641224.git.christophe.leroy@csgroup.eu
Commit ("03fd42d458fb powerpc/fixmap: Fix FIX_EARLY_DEBUG_BASE when
page size is 256k") reworked the setup of the early debug area and
mistakenly replaced 128 * 1024 by SZ_128.
Change to SZ_128K to restore the original 128 kbytes size of the area.
Fixes: 03fd42d458 ("powerpc/fixmap: Fix FIX_EARLY_DEBUG_BASE when page size is 256k")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/996184974d674ff984643778cf1cdd7fe58cc065.1597644194.git.christophe.leroy@csgroup.eu
IS_ENABLED() instead of #ifdef still requires variable declaration.
In this specific case, default_uamor is declared in asm/pkeys.h which
is only included if PPC_MEM_KEYS is enabled.
arch/powerpc/mm/book3s64/hash_utils.c: In function ‘hash__early_init_mmu_secondary’:
arch/powerpc/mm/book3s64/hash_utils.c:1119:21: error: ‘default_uamor’ undeclared (first use in this function)
1119 | mtspr(SPRN_UAMOR, default_uamor);
| ^~~~~~~~~~~~~
Fixes: 6553fb799f ("powerpc/pkeys: Fix boot failures with Nemo board (A-EON AmigaOne X1000)")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200817103301.158836-1-aneesh.kumar@linux.ibm.com
__machine_check_early_realmode_p*() are currently declared as extern
in cputable.c and because of this when compiled with "C=1" (which
enables semantic checker) produces these warnings.
CHECK arch/powerpc/kernel/mce_power.c
arch/powerpc/kernel/mce_power.c:709:6: warning: symbol '__machine_check_early_realmode_p7' was not declared. Should it be static?
arch/powerpc/kernel/mce_power.c:717:6: warning: symbol '__machine_check_early_realmode_p8' was not declared. Should it be static?
arch/powerpc/kernel/mce_power.c:722:6: warning: symbol '__machine_check_early_realmode_p9' was not declared. Should it be static?
arch/powerpc/kernel/mce_power.c:740:6: warning: symbol '__machine_check_early_realmode_p10' was not declared. Should it be static?
Patch here moves the declaration to asm/mce.h and includes the same in
cputable.c
Fixes: ae744f3432 ("powerpc/book3s: Flush SLB/TLBs if we get SLB/TLB machine check errors on power8")
Fixes: 7b9f71f974 ("powerpc/64s: POWER9 machine check handler")
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200817005618.3305028-1-maddy@linux.ibm.com
Add a raw mode cputable entry for POWER10. Copies most of the fields
from commit a3ea40d5c7 ("powerpc: Add POWER10 architected mode")
except for oprofile_cpu_type, machine_check_early, pvr_mask and
pvr_mask fields. On bare metal systems we use DT CPU features, which
doesn't need a cputable entry. But in VMs we still rely on the raw
cputable entry to set the correct values for the PMU related fields.
Fixes: a3ea40d5c7 ("powerpc: Add POWER10 architected mode")
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
[mpe: Reorder vs cleanup patch and add Fixes tag]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200817005618.3305028-2-maddy@linux.ibm.com
Include capability flag PERF_PMU_CAP_EXTENDED_REGS for power10 and
expose MMCR3, SIER2, SIER3 registers as part of extended regs. Also
introduce PERF_REG_PMU_MASK_31 to define extended mask value at
runtime for power10.
Suggested-by: Ryan Grimm <grimm@linux.ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Nageswara R Sastry <nasastry@in.ibm.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-and-tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1596794701-23530-3-git-send-email-atrajeev@linux.vnet.ibm.com
On POWER10 bit 12 in the PVR indicates if the core is SMT4 or SMT8.
Bit 12 is set for SMT4.
Without this patch, /proc/cpuinfo on a SMT4 DD1 POWER10 looks like
this:
cpu : POWER10, altivec supported
revision : 17.0 (pvr 0080 1100)
Fixes: a3ea40d5c7 ("powerpc: Add POWER10 architected mode")
Cc: stable@vger.kernel.org # v5.8
Signed-off-by: Michael Neuling <mikey@neuling.org>
Reviewed-by: Vaidyanathan Srinivasan <svaidy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200803035600.1820371-1-mikey@neuling.org
Patch series "iomap: Constify ioreadX() iomem argument", v3.
The ioread8/16/32() and others have inconsistent interface among the
architectures: some taking address as const, some not.
It seems there is nothing really stopping all of them to take pointer to
const.
This patch (of 4):
The ioreadX() and ioreadX_rep() helpers have inconsistent interface. On
some architectures void *__iomem address argument is a pointer to const,
on some not.
Implementations of ioreadX() do not modify the memory under the address so
they can be converted to a "const" version for const-safety and
consistency among architectures.
[krzk@kernel.org: sh: clk: fix assignment from incompatible pointer type for ioreadX()]
Link: http://lkml.kernel.org/r/20200723082017.24053-1-krzk@kernel.org
[akpm@linux-foundation.org: fix drivers/mailbox/bcm-pdc-mailbox.c]
Link: http://lkml.kernel.org/r/202007132209.Rxmv4QyS%25lkp@intel.com
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Allen Hubbe <allenbh@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Link: http://lkml.kernel.org/r/20200709072837.5869-1-krzk@kernel.org
Link: http://lkml.kernel.org/r/20200709072837.5869-2-krzk@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit 61a47c1ad3 ("sysctl: Remove the sysctl system call"),
sys_sysctl is actually unavailable: any input can only return an error.
We have been warning about people using the sysctl system call for years
and believe there are no more users. Even if there are users of this
interface if they have not complained or fixed their code by now they
probably are not going to, so there is no point in warning them any
longer.
So completely remove sys_sysctl on all architectures.
[nixiaoming@huawei.com: s390: fix build error for sys_call_table_emu]
Link: http://lkml.kernel.org/r/20200618141426.16884-1-nixiaoming@huawei.com
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Will Deacon <will@kernel.org> [arm/arm64]
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Bin Meng <bin.meng@windriver.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: chenzefeng <chenzefeng2@huawei.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christian Brauner <christian@brauner.io>
Cc: Chris Zankel <chris@zankel.net>
Cc: David Howells <dhowells@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Diego Elio Pettenò <flameeyes@flameeyes.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kars de Jong <jongk@linux-m68k.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Nick Piggin <npiggin@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Paul Burton <paulburton@kernel.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Sven Schnelle <svens@stackframe.org>
Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Zhou Yanjie <zhouyanjie@wanyeetech.com>
Link: http://lkml.kernel.org/r/20200616030734.87257-1-nixiaoming@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
One fix for a boot crash on some platforms introduced by the recent pkey
refactoring.
Thanks to:
Christian Zigotzky, Aneesh Kumar K.V.
-----BEGIN PGP SIGNATURE-----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=d4vU
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
"One fix for a boot crash on some platforms introduced by the recent
pkey refactoring.
Thanks to Christian Zigotzky and Aneesh Kumar K.V"
* tag 'powerpc-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pkeys: Fix boot failures with Nemo board (A-EON AmigaOne X1000)
* Improvements and bugfixes for secure VM support, giving reduced startup
time and memory hotplug support.
* Locking fixes in nested KVM code
* Increase number of guests supported by HV KVM to 4094
* Preliminary POWER10 support
ARM:
* Split the VHE and nVHE hypervisor code bases, build the EL2 code
separately, allowing for the VHE code to now be built with instrumentation
* Level-based TLB invalidation support
* Restructure of the vcpu register storage to accomodate the NV code
* Pointer Authentication available for guests on nVHE hosts
* Simplification of the system register table parsing
* MMU cleanups and fixes
* A number of post-32bit cleanups and other fixes
MIPS:
* compilation fixes
x86:
* bugfixes
* support for the SERIALIZE instruction
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl8yfuQUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNweQgAiEycRbpifAueihK3ScKwYcCFhbHg
n6KLiFCY3sJRg+ORNb9EuFPJgGygV8DPKbEMvKaGDhNpX3rOpSIrpi5QQ5Hx+WOj
WHg+aX8Eyy1ys7V84UbiMeZKUbKDDRr0/UOUtJEsF4hiD7s0FgobbQhC/3+awp5k
sdSTMYlXelep+pjdFX7cNIgjrBNFtqH0ECeuDCcQzDg2zlH+poEPyLaC5+U4RF6r
pfvcxd6xp50fobo8ro7kMuBeclG3JxLjqqdNrkkHcF1DxROMLLKN7CjHZchYC/BK
c+S7JHLFnafxiTncMLhv3s4viey05mohW6SxeLw4qcWHfFlz+qyfZwMvZA==
=d/GI
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more KVM updates from Paolo Bonzini:
"PPC:
- Improvements and bugfixes for secure VM support, giving reduced
startup time and memory hotplug support.
- Locking fixes in nested KVM code
- Increase number of guests supported by HV KVM to 4094
- Preliminary POWER10 support
ARM:
- Split the VHE and nVHE hypervisor code bases, build the EL2 code
separately, allowing for the VHE code to now be built with
instrumentation
- Level-based TLB invalidation support
- Restructure of the vcpu register storage to accomodate the NV code
- Pointer Authentication available for guests on nVHE hosts
- Simplification of the system register table parsing
- MMU cleanups and fixes
- A number of post-32bit cleanups and other fixes
MIPS:
- compilation fixes
x86:
- bugfixes
- support for the SERIALIZE instruction"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (70 commits)
KVM: MIPS/VZ: Fix build error caused by 'kvm_run' cleanup
x86/kvm/hyper-v: Synic default SCONTROL MSR needs to be enabled
MIPS: KVM: Convert a fallthrough comment to fallthrough
MIPS: VZ: Only include loongson_regs.h for CPU_LOONGSON64
x86: Expose SERIALIZE for supported cpuid
KVM: x86: Don't attempt to load PDPTRs when 64-bit mode is enabled
KVM: arm64: Move S1PTW S2 fault logic out of io_mem_abort()
KVM: arm64: Don't skip cache maintenance for read-only memslots
KVM: arm64: Handle data and instruction external aborts the same way
KVM: arm64: Rename kvm_vcpu_dabt_isextabt()
KVM: arm: Add trace name for ARM_NISV
KVM: arm64: Ensure that all nVHE hyp code is in .hyp.text
KVM: arm64: Substitute RANDOMIZE_BASE for HARDEN_EL2_VECTORS
KVM: arm64: Make nVHE ASLR conditional on RANDOMIZE_BASE
KVM: PPC: Book3S HV: Rework secure mem slot dropping
KVM: PPC: Book3S HV: Move kvmppc_svm_page_out up
KVM: PPC: Book3S HV: Migrate hot plugged memory
KVM: PPC: Book3S HV: In H_SVM_INIT_DONE, migrate remaining normal-GFNs to secure-GFNs
KVM: PPC: Book3S HV: Track the state GFNs associated with secure VMs
KVM: PPC: Book3S HV: Disable page merging in H_SVM_INIT_START
...
Merge more updates from Andrew Morton:
- most of the rest of MM (memcg, hugetlb, vmscan, proc, compaction,
mempolicy, oom-kill, hugetlbfs, migration, thp, cma, util,
memory-hotplug, cleanups, uaccess, migration, gup, pagemap),
- various other subsystems (alpha, misc, sparse, bitmap, lib, bitops,
checkpatch, autofs, minix, nilfs, ufs, fat, signals, kmod, coredump,
exec, kdump, rapidio, panic, kcov, kgdb, ipc).
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (164 commits)
mm/gup: remove task_struct pointer for all gup code
mm: clean up the last pieces of page fault accountings
mm/xtensa: use general page fault accounting
mm/x86: use general page fault accounting
mm/sparc64: use general page fault accounting
mm/sparc32: use general page fault accounting
mm/sh: use general page fault accounting
mm/s390: use general page fault accounting
mm/riscv: use general page fault accounting
mm/powerpc: use general page fault accounting
mm/parisc: use general page fault accounting
mm/openrisc: use general page fault accounting
mm/nios2: use general page fault accounting
mm/nds32: use general page fault accounting
mm/mips: use general page fault accounting
mm/microblaze: use general page fault accounting
mm/m68k: use general page fault accounting
mm/ia64: use general page fault accounting
mm/hexagon: use general page fault accounting
mm/csky: use general page fault accounting
...
Here're the last pieces of page fault accounting that were still done
outside handle_mm_fault() where we still have regs==NULL when calling
handle_mm_fault():
arch/powerpc/mm/copro_fault.c: copro_handle_mm_fault
arch/sparc/mm/fault_32.c: force_user_fault
arch/um/kernel/trap.c: handle_page_fault
mm/gup.c: faultin_page
fixup_user_fault
mm/hmm.c: hmm_vma_fault
mm/ksm.c: break_ksm
Some of them has the issue of duplicated accounting for page fault
retries. Some of them didn't do the accounting at all.
This patch cleans all these up by letting handle_mm_fault() to do per-task
page fault accounting even if regs==NULL (though we'll still skip the perf
event accountings). With that, we can safely remove all the outliers now.
There's another functional change in that now we account the page faults
to the caller of gup, rather than the task_struct that passed into the gup
code. More information of this can be found at [1].
After this patch, below things should never be touched again outside
handle_mm_fault():
- task_struct.[maj|min]_flt
- PERF_COUNT_SW_PAGE_FAULTS_[MAJ|MIN]
[1] https://lore.kernel.org/lkml/CAHk-=wj_V2Tps2QrMn20_W0OJF9xqNh52XSGA42s-ZJ8Y+GyKw@mail.gmail.com/
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200707225021.200906-25-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use the general page fault accounting by passing regs into
handle_mm_fault().
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Link: http://lkml.kernel.org/r/20200707225021.200906-17-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm: Page fault accounting cleanups", v5.
This is v5 of the pf accounting cleanup series. It originates from Gerald
Schaefer's report on an issue a week ago regarding to incorrect page fault
accountings for retried page fault after commit 4064b98270 ("mm: allow
VM_FAULT_RETRY for multiple times"):
https://lore.kernel.org/lkml/20200610174811.44b94525@thinkpad/
What this series did:
- Correct page fault accounting: we do accounting for a page fault
(no matter whether it's from #PF handling, or gup, or anything else)
only with the one that completed the fault. For example, page fault
retries should not be counted in page fault counters. Same to the
perf events.
- Unify definition of PERF_COUNT_SW_PAGE_FAULTS: currently this perf
event is used in an adhoc way across different archs.
Case (1): for many archs it's done at the entry of a page fault
handler, so that it will also cover e.g. errornous faults.
Case (2): for some other archs, it is only accounted when the page
fault is resolved successfully.
Case (3): there're still quite some archs that have not enabled
this perf event.
Since this series will touch merely all the archs, we unify this
perf event to always follow case (1), which is the one that makes most
sense. And since we moved the accounting into handle_mm_fault, the
other two MAJ/MIN perf events are well taken care of naturally.
- Unify definition of "major faults": the definition of "major
fault" is slightly changed when used in accounting (not
VM_FAULT_MAJOR). More information in patch 1.
- Always account the page fault onto the one that triggered the page
fault. This does not matter much for #PF handlings, but mostly for
gup. More information on this in patch 25.
Patchset layout:
Patch 1: Introduced the accounting in handle_mm_fault(), not enabled.
Patch 2-23: Enable the new accounting for arch #PF handlers one by one.
Patch 24: Enable the new accounting for the rest outliers (gup, iommu, etc.)
Patch 25: Cleanup GUP task_struct pointer since it's not needed any more
This patch (of 25):
This is a preparation patch to move page fault accountings into the
general code in handle_mm_fault(). This includes both the per task
flt_maj/flt_min counters, and the major/minor page fault perf events. To
do this, the pt_regs pointer is passed into handle_mm_fault().
PERF_COUNT_SW_PAGE_FAULTS should still be kept in per-arch page fault
handlers.
So far, all the pt_regs pointer that passed into handle_mm_fault() is
NULL, which means this patch should have no intented functional change.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200707225021.200906-1-peterx@redhat.com
Link: http://lkml.kernel.org/r/20200707225021.200906-2-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
segment_eq is only used to implement uaccess_kernel. Just open code
uaccess_kernel in the arch uaccess headers and remove one layer of
indirection.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Greentime Hu <green.hu@gmail.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Link: http://lkml.kernel.org/r/20200710135706.537715-5-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Including:
- Removal of the dev->archdata.iommu (or similar) pointers from
most architectures. Only Sparc is left, but this is private to
Sparc as their drivers don't use the IOMMU-API.
- ARM-SMMU Updates from Will Deacon:
- Support for SMMU-500 implementation in Marvell
Armada-AP806 SoC
- Support for SMMU-500 implementation in NVIDIA Tegra194 SoC
- DT compatible string updates
- Remove unused IOMMU_SYS_CACHE_ONLY flag
- Move ARM-SMMU drivers into their own subdirectory
- Intel VT-d Updates from Lu Baolu:
- Misc tweaks and fixes for vSVA
- Report/response page request events
- Cleanups
- Move the Kconfig and Makefile bits for the AMD and Intel
drivers into their respective subdirectory.
- MT6779 IOMMU Support
- Support for new chipsets in the Renesas IOMMU driver
- Other misc cleanups and fixes (e.g. to improve compile test
coverage)
-----BEGIN PGP SIGNATURE-----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=3O2Z
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Remove of the dev->archdata.iommu (or similar) pointers from most
architectures. Only Sparc is left, but this is private to Sparc as
their drivers don't use the IOMMU-API.
- ARM-SMMU updates from Will Deacon:
- Support for SMMU-500 implementation in Marvell Armada-AP806 SoC
- Support for SMMU-500 implementation in NVIDIA Tegra194 SoC
- DT compatible string updates
- Remove unused IOMMU_SYS_CACHE_ONLY flag
- Move ARM-SMMU drivers into their own subdirectory
- Intel VT-d updates from Lu Baolu:
- Misc tweaks and fixes for vSVA
- Report/response page request events
- Cleanups
- Move the Kconfig and Makefile bits for the AMD and Intel drivers into
their respective subdirectory.
- MT6779 IOMMU Support
- Support for new chipsets in the Renesas IOMMU driver
- Other misc cleanups and fixes (e.g. to improve compile test coverage)
* tag 'iommu-updates-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (77 commits)
iommu/amd: Move Kconfig and Makefile bits down into amd directory
iommu/vt-d: Move Kconfig and Makefile bits down into intel directory
iommu/arm-smmu: Move Arm SMMU drivers into their own subdirectory
iommu/vt-d: Skip TE disabling on quirky gfx dedicated iommu
iommu: Add gfp parameter to io_pgtable_ops->map()
iommu: Mark __iommu_map_sg() as static
iommu/vt-d: Rename intel-pasid.h to pasid.h
iommu/vt-d: Add page response ops support
iommu/vt-d: Report page request faults for guest SVA
iommu/vt-d: Add a helper to get svm and sdev for pasid
iommu/vt-d: Refactor device_to_iommu() helper
iommu/vt-d: Disable multiple GPASID-dev bind
iommu/vt-d: Warn on out-of-range invalidation address
iommu/vt-d: Fix devTLB flush for vSVA
iommu/vt-d: Handle non-page aligned address
iommu/vt-d: Fix PASID devTLB invalidation
iommu/vt-d: Remove global page support in devTLB flush
iommu/vt-d: Enforce PASID devTLB field mask
iommu: Make some functions static
iommu/amd: Remove double zero check
...
On p6 and before we should avoid updating UAMOR SPRN. This resulted
in boot failure on Nemo board.
Fixes: 269e829f48 ("powerpc/book3s64/pkey: Disable pkey on POWER6 and before")
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200810102623.685083-1-aneesh.kumar@linux.ibm.com
- run the checker (e.g. sparse) after the compiler
- remove unneeded cc-option tests for old compiler flags
- fix tar-pkg to install dtbs
- introduce ccflags-remove-y and asflags-remove-y syntax
- allow to trace functions in sub-directories of lib/
- introduce hostprogs-always-y and userprogs-always-y syntax
- various Makefile cleanups
-----BEGIN PGP SIGNATURE-----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=bkNQ
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- run the checker (e.g. sparse) after the compiler
- remove unneeded cc-option tests for old compiler flags
- fix tar-pkg to install dtbs
- introduce ccflags-remove-y and asflags-remove-y syntax
- allow to trace functions in sub-directories of lib/
- introduce hostprogs-always-y and userprogs-always-y syntax
- various Makefile cleanups
* tag 'kbuild-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: stop filtering out $(GCC_PLUGINS_CFLAGS) from cc-option base
kbuild: include scripts/Makefile.* only when relevant CONFIG is enabled
kbuild: introduce hostprogs-always-y and userprogs-always-y
kbuild: sort hostprogs before passing it to ifneq
kbuild: move host .so build rules to scripts/gcc-plugins/Makefile
kbuild: Replace HTTP links with HTTPS ones
kbuild: trace functions in subdirectories of lib/
kbuild: introduce ccflags-remove-y and asflags-remove-y
kbuild: do not export LDFLAGS_vmlinux
kbuild: always create directories of targets
powerpc/boot: add DTB to 'targets'
kbuild: buildtar: add dtbs support
kbuild: remove cc-option test of -ffreestanding
kbuild: remove cc-option test of -fno-stack-protector
Revert "kbuild: Create directory for target DTB"
kbuild: run the checker after the compiler
- Improvements and bug-fixes for secure VM support, giving reduced startup
time and memory hotplug support.
- Locking fixes in nested KVM code
- Increase number of guests supported by HV KVM to 4094
- Preliminary POWER10 support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJfH7NMAAoJEJ2a6ncsY3GfkZoH/1be9wpKse2wTke3UcgqGnuX
WkOXMqvTG/1goHIuPKm0QP9O3RU3m2EnXqGJjkg71zVYierzMONhJblfU4XDdk2E
FbD2tjNEGuQGNXp8mrHFuwAB6zRQTQevsxsIPYU7KDZ8wKavSAKtayJNEfAf2inI
YB49Vj8N5djmH3Y+T41XsKx8ut4n1o82MTQsuiHwbtZt1GVO9N7OXW4SZvYbu18v
CUp3GIkiFU+VVQv+9a1a1c0w7DendNGL2mNF18tQohwV+NOFv0wsP4ZOONBE8c70
myo9SAuxpOZfeENxk7Cw323kZ2095e/6IDSUeQ91xp/FYmq6YTXmAvc//MKKaow=
=Lnvu
-----END PGP SIGNATURE-----
Merge tag 'kvm-ppc-next-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into kvm-next-5.6
PPC KVM update for 5.9
- Improvements and bug-fixes for secure VM support, giving reduced startup
time and memory hotplug support.
- Locking fixes in nested KVM code
- Increase number of guests supported by HV KVM to 4094
- Preliminary POWER10 support
CFLAGS_REMOVE_<file>.o filters out flags when compiling a particular
object, but there is no convenient way to do that for every object in
a directory.
Add ccflags-remove-y and asflags-remove-y to make it easily.
Use ccflags-remove-y to clean up some Makefiles.
The add/remove order works as follows:
[1] KBUILD_CFLAGS specifies compiler flags used globally
[2] ccflags-y adds compiler flags for all objects in the
current Makefile
[3] ccflags-remove-y removes compiler flags for all objects in the
current Makefile (New feature)
[4] CFLAGS_<file> adds compiler flags per file.
[5] CFLAGS_REMOVE_<file> removes compiler flags per file.
Having [3] before [4] allows us to remove flags from most (but not all)
objects in the current Makefile.
For example, kernel/trace/Makefile removes $(CC_FLAGS_FTRACE)
from all objects in the directory, then adds it back to
trace_selftest_dynamic.o and CFLAGS_trace_kprobe_selftest.o
The same applies to lib/livepatch/Makefile.
Please note ccflags-remove-y has no effect to the sub-directories.
In contrast, the previous notation got rid of compiler flags also from
all the sub-directories.
The following are not affected because they have no sub-directories:
arch/arm/boot/compressed/
arch/powerpc/xmon/
arch/sh/
kernel/trace/
However, lib/ has several sub-directories.
To keep the behavior, I added ccflags-remove-y to all Makefiles
in subdirectories of lib/, except the following:
lib/vdso/Makefile - Kbuild does not descend into this Makefile
lib/raid/test/Makefile - This is not used for the kernel build
I think commit 2464a609de ("ftrace: do not trace library functions")
excluded too much. In the next commit, I will remove ccflags-remove-y
from the sub-directories of lib/.
Suggested-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Brendan Higgins <brendanhiggins@google.com> (KUnit)
Tested-by: Anders Roxell <anders.roxell@linaro.org>
The merge resolution in commit 25d8d4eeca left ret no longer used,
leading to:
arch/powerpc/kernel/ptrace/ptrace-view.c: In function ‘pkey_get’:
arch/powerpc/kernel/ptrace/ptrace-view.c:473:6: error: unused variable ‘ret’
473 | int ret;
Fix it by removing ret.
Fixes: 25d8d4eeca ("Merge tag 'powerpc-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull fdpick coredump update from Al Viro:
"Switches fdpic coredumps away from original aout dumping primitives to
the same kind of regset use as regular elf coredumps do"
* 'work.fdpic' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
[elf-fdpic] switch coredump to regsets
[elf-fdpic] use elf_dump_thread_status() for the dumper thread as well
[elf-fdpic] move allocation of elf_thread_status into elf_dump_thread_status()
[elf-fdpic] coredump: don't bother with cyclic list for per-thread objects
kill elf_fpxregs_t
take fdpic-related parts of elf_prstatus out
unexport linux/elfcore.h
Merge misc updates from Andrew Morton:
- a few MM hotfixes
- kthread, tools, scripts, ntfs and ocfs2
- some of MM
Subsystems affected by this patch series: kthread, tools, scripts, ntfs,
ocfs2 and mm (hofixes, pagealloc, slab-generic, slab, slub, kcsan,
debug, pagecache, gup, swap, shmem, memcg, pagemap, mremap, mincore,
sparsemem, vmalloc, kasan, pagealloc, hugetlb and vmscan).
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (162 commits)
mm: vmscan: consistent update to pgrefill
mm/vmscan.c: fix typo
khugepaged: khugepaged_test_exit() check mmget_still_valid()
khugepaged: retract_page_tables() remember to test exit
khugepaged: collapse_pte_mapped_thp() protect the pmd lock
khugepaged: collapse_pte_mapped_thp() flush the right range
mm/hugetlb: fix calculation of adjust_range_if_pmd_sharing_possible
mm: thp: replace HTTP links with HTTPS ones
mm/page_alloc: fix memalloc_nocma_{save/restore} APIs
mm/page_alloc.c: skip setting nodemask when we are in interrupt
mm/page_alloc: fallbacks at most has 3 elements
mm/page_alloc: silence a KASAN false positive
mm/page_alloc.c: remove unnecessary end_bitidx for [set|get]_pfnblock_flags_mask()
mm/page_alloc.c: simplify pageblock bitmap access
mm/page_alloc.c: extract the common part in pfn_to_bitidx()
mm/page_alloc.c: replace the definition of NR_MIGRATETYPE_BITS with PB_migratetype_bits
mm/shuffle: remove dynamic reconfiguration
mm/memory_hotplug: document why shuffle_zone() is relevant
mm/page_alloc: remove nr_free_pagecache_pages()
mm: remove vm_total_pages
...
After removal of CONFIG_HAVE_MEMBLOCK_NODE_MAP we have two equivalent
functions that call memory_present() for each region in memblock.memory:
sparse_memory_present_with_active_regions() and membocks_present().
Moreover, all architectures have a call to either of these functions
preceding the call to sparse_init() and in the most cases they are called
one after the other.
Mark the regions from memblock.memory as present during sparce_init() by
making sparse_init() call memblocks_present(), make memblocks_present()
and memory_present() functions static and remove redundant
sparse_memory_present_with_active_regions() function.
Also remove no longer required HAVE_MEMORY_PRESENT configuration option.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200712083130.22919-1-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are many instances where vmemap allocation is often switched between
regular memory and device memory just based on whether altmap is available
or not. vmemmap_alloc_block_buf() is used in various platforms to
allocate vmemmap mappings. Lets also enable it to handle altmap based
device memory allocation along with existing regular memory allocations.
This will help in avoiding the altmap based allocation switch in many
places. To summarize there are two different methods to call
vmemmap_alloc_block_buf().
vmemmap_alloc_block_buf(size, node, NULL) /* Allocate from system RAM */
vmemmap_alloc_block_buf(size, node, altmap) /* Allocate from altmap */
This converts altmap_alloc_block_buf() into a static function, drops it's
entry from the header and updates Documentation/vm/memory-model.rst.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Jia He <justin.he@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Will Deacon <will@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Yu Zhao <yuzhao@google.com>
Link: http://lkml.kernel.org/r/1594004178-8861-3-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm: cleanup usage of <asm/pgalloc.h>"
Most architectures have very similar versions of pXd_alloc_one() and
pXd_free_one() for intermediate levels of page table. These patches add
generic versions of these functions in <asm-generic/pgalloc.h> and enable
use of the generic functions where appropriate.
In addition, functions declared and defined in <asm/pgalloc.h> headers are
used mostly by core mm and early mm initialization in arch and there is no
actual reason to have the <asm/pgalloc.h> included all over the place.
The first patch in this series removes unneeded includes of
<asm/pgalloc.h>
In the end it didn't work out as neatly as I hoped and moving
pXd_alloc_track() definitions to <asm-generic/pgalloc.h> would require
unnecessary changes to arches that have custom page table allocations, so
I've decided to move lib/ioremap.c to mm/ and make pgalloc-track.h local
to mm/.
This patch (of 8):
In most cases <asm/pgalloc.h> header is required only for allocations of
page table memory. Most of the .c files that include that header do not
use symbols declared in <asm/pgalloc.h> and do not require that header.
As for the other header files that used to include <asm/pgalloc.h>, it is
possible to move that include into the .c file that actually uses symbols
from <asm/pgalloc.h> and drop the include from the header file.
The process was somewhat automated using
sed -i -E '/[<"]asm\/pgalloc\.h/d' \
$(grep -L -w -f /tmp/xx \
$(git grep -E -l '[<"]asm/pgalloc\.h'))
where /tmp/xx contains all the symbols defined in
arch/*/include/asm/pgalloc.h.
[rppt@linux.ibm.com: fix powerpc warning]
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Link: http://lkml.kernel.org/r/20200627143453.31835-1-rppt@kernel.org
Link: http://lkml.kernel.org/r/20200627143453.31835-2-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Add support for (optionally) using queued spinlocks & rwlocks.
- Support for a new faster system call ABI using the scv instruction on Power9
or later.
- Drop support for the PROT_SAO mmap/mprotect flag as it will be unsupported on
Power10 and future processors, leaving us with no way to implement the
functionality it requests. This risks breaking userspace, though we believe
it is unused in practice.
- A bug fix for, and then the removal of, our custom stack expansion checking.
We now allow stack expansion up to the rlimit, like other architectures.
- Remove the remnants of our (previously disabled) topology update code, which
tried to react to NUMA layout changes on virtualised systems, but was prone
to crashes and other problems.
- Add PMU support for Power10 CPUs.
- A change to our signal trampoline so that we don't unbalance the link stack
(branch return predictor) in the signal delivery path.
- Lots of other cleanups, refactorings, smaller features and so on as usual.
Thanks to:
Abhishek Goel, Alastair D'Silva, Alexander A. Klimov, Alexey Kardashevskiy,
Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Anton
Blanchard, Arnd Bergmann, Athira Rajeev, Balamuruhan S, Bharata B Rao, Bill
Wendling, Bin Meng, Cédric Le Goater, Chris Packham, Christophe Leroy,
Christoph Hellwig, Daniel Axtens, Dan Williams, David Lamparter, Desnes A.
Nunes do Rosario, Erhard F., Finn Thain, Frederic Barrat, Ganesh Goudar,
Gautham R. Shenoy, Geoff Levand, Greg Kurz, Gustavo A. R. Silva, Hari Bathini,
Harish, Imre Kaloz, Joel Stanley, Joe Perches, John Crispin, Jordan Niethe,
Kajol Jain, Kamalesh Babulal, Kees Cook, Laurent Dufour, Leonardo Bras, Li
RongQing, Madhavan Srinivasan, Mahesh Salgaonkar, Mark Cave-Ayland, Michal
Suchanek, Milton Miller, Mimi Zohar, Murilo Opsfelder Araujo, Nathan
Chancellor, Nathan Lynch, Naveen N. Rao, Nayna Jain, Nicholas Piggin, Oliver
O'Halloran, Palmer Dabbelt, Pedro Miraglia Franco de Carvalho, Philippe
Bergheaud, Pingfan Liu, Pratik Rajesh Sampat, Qian Cai, Qinglang Miao, Randy
Dunlap, Ravi Bangoria, Sachin Sant, Sam Bobroff, Sandipan Das, Santosh
Sivaraj, Satheesh Rajendran, Shirisha Ganta, Sourabh Jain, Srikar Dronamraju,
Stan Johnson, Stephen Rothwell, Thadeu Lima de Souza Cascardo, Thiago Jung
Bauermann, Tom Lane, Vaibhav Jain, Vladis Dronov, Wei Yongjun, Wen Xiong,
YueHaibing.
-----BEGIN PGP SIGNATURE-----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=QMY1
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add support for (optionally) using queued spinlocks & rwlocks.
- Support for a new faster system call ABI using the scv instruction on
Power9 or later.
- Drop support for the PROT_SAO mmap/mprotect flag as it will be
unsupported on Power10 and future processors, leaving us with no way
to implement the functionality it requests. This risks breaking
userspace, though we believe it is unused in practice.
- A bug fix for, and then the removal of, our custom stack expansion
checking. We now allow stack expansion up to the rlimit, like other
architectures.
- Remove the remnants of our (previously disabled) topology update
code, which tried to react to NUMA layout changes on virtualised
systems, but was prone to crashes and other problems.
- Add PMU support for Power10 CPUs.
- A change to our signal trampoline so that we don't unbalance the link
stack (branch return predictor) in the signal delivery path.
- Lots of other cleanups, refactorings, smaller features and so on as
usual.
Thanks to: Abhishek Goel, Alastair D'Silva, Alexander A. Klimov, Alexey
Kardashevskiy, Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju
T Sudhakar, Anton Blanchard, Arnd Bergmann, Athira Rajeev, Balamuruhan
S, Bharata B Rao, Bill Wendling, Bin Meng, Cédric Le Goater, Chris
Packham, Christophe Leroy, Christoph Hellwig, Daniel Axtens, Dan
Williams, David Lamparter, Desnes A. Nunes do Rosario, Erhard F., Finn
Thain, Frederic Barrat, Ganesh Goudar, Gautham R. Shenoy, Geoff Levand,
Greg Kurz, Gustavo A. R. Silva, Hari Bathini, Harish, Imre Kaloz, Joel
Stanley, Joe Perches, John Crispin, Jordan Niethe, Kajol Jain, Kamalesh
Babulal, Kees Cook, Laurent Dufour, Leonardo Bras, Li RongQing, Madhavan
Srinivasan, Mahesh Salgaonkar, Mark Cave-Ayland, Michal Suchanek, Milton
Miller, Mimi Zohar, Murilo Opsfelder Araujo, Nathan Chancellor, Nathan
Lynch, Naveen N. Rao, Nayna Jain, Nicholas Piggin, Oliver O'Halloran,
Palmer Dabbelt, Pedro Miraglia Franco de Carvalho, Philippe Bergheaud,
Pingfan Liu, Pratik Rajesh Sampat, Qian Cai, Qinglang Miao, Randy
Dunlap, Ravi Bangoria, Sachin Sant, Sam Bobroff, Sandipan Das, Santosh
Sivaraj, Satheesh Rajendran, Shirisha Ganta, Sourabh Jain, Srikar
Dronamraju, Stan Johnson, Stephen Rothwell, Thadeu Lima de Souza
Cascardo, Thiago Jung Bauermann, Tom Lane, Vaibhav Jain, Vladis Dronov,
Wei Yongjun, Wen Xiong, YueHaibing.
* tag 'powerpc-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (337 commits)
selftests/powerpc: Fix pkey syscall redefinitions
powerpc: Fix circular dependency between percpu.h and mmu.h
powerpc/powernv/sriov: Fix use of uninitialised variable
selftests/powerpc: Skip vmx/vsx/tar/etc tests on older CPUs
powerpc/40x: Fix assembler warning about r0
powerpc/papr_scm: Add support for fetching nvdimm 'fuel-gauge' metric
powerpc/papr_scm: Fetch nvdimm performance stats from PHYP
cpuidle: pseries: Fixup exit latency for CEDE(0)
cpuidle: pseries: Add function to parse extended CEDE records
cpuidle: pseries: Set the latency-hint before entering CEDE
selftests/powerpc: Fix online CPU selection
powerpc/perf: Consolidate perf_callchain_user_[64|32]()
powerpc/pseries/hotplug-cpu: Remove double free in error path
powerpc/pseries/mobility: Add pr_debug() for device tree changes
powerpc/pseries/mobility: Set pr_fmt()
powerpc/cacheinfo: Warn if cache object chain becomes unordered
powerpc/cacheinfo: Improve diagnostics about malformed cache lists
powerpc/cacheinfo: Use name@unit instead of full DT path in debug messages
powerpc/cacheinfo: Set pr_fmt()
powerpc: fix function annotations to avoid section mismatch warnings with gcc-10
...
Pull ptrace regset updates from Al Viro:
"Internal regset API changes:
- regularize copy_regset_{to,from}_user() callers
- switch to saner calling conventions for ->get()
- kill user_regset_copyout()
The ->put() side of things will have to wait for the next cycle,
unfortunately.
The balance is about -1KLoC and replacements for ->get() instances are
a lot saner"
* 'work.regset' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (41 commits)
regset: kill user_regset_copyout{,_zero}()
regset(): kill ->get_size()
regset: kill ->get()
csky: switch to ->regset_get()
xtensa: switch to ->regset_get()
parisc: switch to ->regset_get()
nds32: switch to ->regset_get()
nios2: switch to ->regset_get()
hexagon: switch to ->regset_get()
h8300: switch to ->regset_get()
openrisc: switch to ->regset_get()
riscv: switch to ->regset_get()
c6x: switch to ->regset_get()
ia64: switch to ->regset_get()
arc: switch to ->regset_get()
arm: switch to ->regset_get()
sh: convert to ->regset_get()
arm64: switch to ->regset_get()
mips: switch to ->regset_get()
sparc: switch to ->regset_get()
...
x86:
* Report last CPU for debugging
* Emulate smaller MAXPHYADDR in the guest than in the host
* .noinstr and tracing fixes from Thomas
* nested SVM page table switching optimization and fixes
Generic:
* Unify shadow MMU cache data structures across architectures
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl8pC+oUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNcOwgAjomqtEqQNlp7DdZT7VyyklzbxX1/
ud7v+oOJ8K4sFlf64lSthjPo3N9rzZCcw+yOXmuyuITngXOGc3tzIwXpCzpLtuQ1
WO1Ql3B/2dCi3lP5OMmsO1UAZqy9pKLg1dfeYUPk48P5+p7d/NPmk+Em5kIYzKm5
JsaHfCp2EEXomwmljNJ8PQ1vTjIQSSzlgYUBZxmCkaaX7zbEUMtxAQCStHmt8B84
33LczwXBm3viSWrzsoBV37I70+tseugiSGsCfUyupXOvq55d6D9FCqtCb45Hn4Vh
Ik8ggKdalsk/reiGEwNw1/3nr6mRMkHSbl+Mhc4waOIFf9dn0urgQgOaDg==
=YVx0
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"s390:
- implement diag318
x86:
- Report last CPU for debugging
- Emulate smaller MAXPHYADDR in the guest than in the host
- .noinstr and tracing fixes from Thomas
- nested SVM page table switching optimization and fixes
Generic:
- Unify shadow MMU cache data structures across architectures"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (127 commits)
KVM: SVM: Fix sev_pin_memory() error handling
KVM: LAPIC: Set the TDCR settable bits
KVM: x86: Specify max TDP level via kvm_configure_mmu()
KVM: x86/mmu: Rename max_page_level to max_huge_page_level
KVM: x86: Dynamically calculate TDP level from max level and MAXPHYADDR
KVM: VXM: Remove temporary WARN on expected vs. actual EPTP level mismatch
KVM: x86: Pull the PGD's level from the MMU instead of recalculating it
KVM: VMX: Make vmx_load_mmu_pgd() static
KVM: x86/mmu: Add separate helper for shadow NPT root page role calc
KVM: VMX: Drop a duplicate declaration of construct_eptp()
KVM: nSVM: Correctly set the shadow NPT root level in its MMU role
KVM: Using macros instead of magic values
MIPS: KVM: Fix build error caused by 'kvm_run' cleanup
KVM: nSVM: remove nonsensical EXITINFO1 adjustment on nested NPF
KVM: x86: Add a capability for GUEST_MAXPHYADDR < HOST_MAXPHYADDR support
KVM: VMX: optimize #PF injection when MAXPHYADDR does not match
KVM: VMX: Add guest physical address check in EPT violation and misconfig
KVM: VMX: introduce vmx_need_pf_intercept
KVM: x86: update exception bitmap on CPUID changes
KVM: x86: rename update_bp_intercept to update_exception_bitmap
...
Pull networking updates from David Miller:
1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan.
2) Support UDP segmentation in code TSO code, from Eric Dumazet.
3) Allow flashing different flash images in cxgb4 driver, from Vishal
Kulkarni.
4) Add drop frames counter and flow status to tc flower offloading,
from Po Liu.
5) Support n-tuple filters in cxgb4, from Vishal Kulkarni.
6) Various new indirect call avoidance, from Eric Dumazet and Brian
Vazquez.
7) Fix BPF verifier failures on 32-bit pointer arithmetic, from
Yonghong Song.
8) Support querying and setting hardware address of a port function via
devlink, use this in mlx5, from Parav Pandit.
9) Support hw ipsec offload on bonding slaves, from Jarod Wilson.
10) Switch qca8k driver over to phylink, from Jonathan McDowell.
11) In bpftool, show list of processes holding BPF FD references to
maps, programs, links, and btf objects. From Andrii Nakryiko.
12) Several conversions over to generic power management, from Vaibhav
Gupta.
13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry
Yakunin.
14) Various https url conversions, from Alexander A. Klimov.
15) Timestamping and PHC support for mscc PHY driver, from Antoine
Tenart.
16) Support bpf iterating over tcp and udp sockets, from Yonghong Song.
17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov.
18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan.
19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several
drivers. From Luc Van Oostenryck.
20) XDP support for xen-netfront, from Denis Kirjanov.
21) Support receive buffer autotuning in MPTCP, from Florian Westphal.
22) Support EF100 chip in sfc driver, from Edward Cree.
23) Add XDP support to mvpp2 driver, from Matteo Croce.
24) Support MPTCP in sock_diag, from Paolo Abeni.
25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic
infrastructure, from Jakub Kicinski.
26) Several pci_ --> dma_ API conversions, from Christophe JAILLET.
27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel.
28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki.
29) Refactor a lot of networking socket option handling code in order to
avoid set_fs() calls, from Christoph Hellwig.
30) Add rfc4884 support to icmp code, from Willem de Bruijn.
31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei.
32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin.
33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin.
34) Support TCP syncookies in MPTCP, from Flowian Westphal.
35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano
Brivio.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits)
net: thunderx: initialize VF's mailbox mutex before first usage
usb: hso: remove bogus check for EINPROGRESS
usb: hso: no complaint about kmalloc failure
hso: fix bailout in error case of probe
ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM
selftests/net: relax cpu affinity requirement in msg_zerocopy test
mptcp: be careful on subflow creation
selftests: rtnetlink: make kci_test_encap() return sub-test result
selftests: rtnetlink: correct the final return value for the test
net: dsa: sja1105: use detected device id instead of DT one on mismatch
tipc: set ub->ifindex for local ipv6 address
ipv6: add ipv6_dev_find()
net: openvswitch: silence suspicious RCU usage warning
Revert "vxlan: fix tos value before xmit"
ptp: only allow phase values lower than 1 period
farsync: switch from 'pci_' to 'dma_' API
wan: wanxl: switch from 'pci_' to 'dma_' API
hv_netvsc: do not use VF device if link is down
dpaa2-eth: Fix passing zero to 'PTR_ERR' warning
net: macb: Properly handle phylink on at91sam9x
...
This series adds reporting of the page table order from hmm_range_fault()
and some optimization of migrate_vma():
- Report the size of the page table mapping out of hmm_range_fault(). This
makes it easier to establish a large/huge/etc mapping in the device's
page table.
- Allow devices to ignore the invalidations during migration in cases
where the migration is not going to change pages. For instance migrating
pages to a device does not require the device to invalidate pages
already in the device.
- Update nouveau and hmm_tests to use the above
-----BEGIN PGP SIGNATURE-----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=omAU
-----END PGP SIGNATURE-----
Merge tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull hmm updates from Jason Gunthorpe:
"Ralph has been working on nouveau's use of hmm_range_fault() and
migrate_vma() which resulted in this small series. It adds reporting
of the page table order from hmm_range_fault() and some optimization
of migrate_vma():
- Report the size of the page table mapping out of hmm_range_fault().
This makes it easier to establish a large/huge/etc mapping in the
device's page table.
- Allow devices to ignore the invalidations during migration in cases
where the migration is not going to change pages.
For instance migrating pages to a device does not require the
device to invalidate pages already in the device.
- Update nouveau and hmm_tests to use the above"
* tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
mm/hmm/test: use the new migration invalidation
nouveau/svm: use the new migration invalidation
mm/notifier: add migration invalidation type
mm/migrate: add a flags parameter to migrate_vma
nouveau: fix storing invalid ptes
nouveau/hmm: support mapping large sysmem pages
nouveau: fix mapping 2MB sysmem pages
nouveau/hmm: fault one page at a time
mm/hmm: add tests for hmm_pfn_to_map_order()
mm/hmm: provide the page mapping order in hmm_range_fault()
- make support for dma_ops optional
- move more code out of line
- add generic support for a dma_ops bypass mode
- misc cleanups
-----BEGIN PGP SIGNATURE-----
iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAl8oGscLHGhjaEBsc3Qu
ZGUACgkQD55TZVIEUYNfEhAAmFwd6BBHGwAhXUchoIue5vdNnuY3GiBFRzUdz67W
zRYYgZYiPjl+MwflRmwPcoWEnGzmweRa2s6OnyDostiCRauioa8BuQfGqJasf1yZ
D36dFNVHGW0o6pRDUQkd688k/4A6szwuwpq83qi4e8X2I9QzAITHtW8izjfPM923
FlJzxEFggbB2TvwfUXOZhmpuG4Dog8S7VZ1Uz4QAg0Z/5FDqIKAAG2aZMqCXBbiX
01E8tr0AqU/jn2xpc8O+DJGFiYIRhqhyNxQbH6qz1Q3xGFSokcLYm3YqkqVOgpn1
DLs2UFDxWkly/F+wGnYtju7OD9VGPywzOcW125/LIsApYN5R/rYrtQzK41eq7Mp5
HY3tqgNTIMdnl4so7QXeU4Vxj+lUdPlI26NZGszcM5AVftdTX8KjGdS+0+PBza6i
i7trwG7J5/DnwiBCvEKoul7Ul1psUMTSvYwINTXRqsU4mZXhhx/mwyXbtruELnkj
3agM98u6hoalLNjd2aueh+NjMZi1r+MchTrfRvTcxJ+yQ5BoR5kF+iz7eT/LtZ72
AqWwimsPGNkLHUa0TrqWql5tv90cdDkBZzWXVbixwxRfgynWYLE6jugeIy8hwjFf
GjO5XKbBwnWPjdSzFsVMPeuNpmr7ZjVHHewy2Q/jWQAIOyeof0VztEl23LN5yUkx
pc8=
=90UK
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.9' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- make support for dma_ops optional
- move more code out of line
- add generic support for a dma_ops bypass mode
- misc cleanups
* tag 'dma-mapping-5.9' of git://git.infradead.org/users/hch/dma-mapping:
dma-contiguous: cleanup dma_alloc_contiguous
dma-debug: use named initializers for dir2name
powerpc: use the generic dma_ops_bypass mode
dma-mapping: add a dma_ops_bypass flag to struct device
dma-mapping: make support for dma ops optional
dma-mapping: inline the fast path dma-direct calls
dma-mapping: move the remaining DMA API calls out of line
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXygcpgAKCRCRxhvAZXjc
ogPeAQDv1ncqtNroFAC4pJ4tQhH7JSjW0OltiMk/AocY/J2SdQD9GJ15luYJ0/om
697q/Z68sndRynhdoZlMuf3oYuBlHQw=
=3ZhE
-----END PGP SIGNATURE-----
Merge tag 'close-range-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull close_range() implementation from Christian Brauner:
"This adds the close_range() syscall. It allows to efficiently close a
range of file descriptors up to all file descriptors of a calling
task.
This is coordinated with the FreeBSD folks which have copied our
version of this syscall and in the meantime have already merged it in
April 2019:
https://reviews.freebsd.org/D21627https://svnweb.freebsd.org/base?view=revision&revision=359836
The syscall originally came up in a discussion around the new mount
API and making new file descriptor types cloexec by default. During
this discussion, Al suggested the close_range() syscall.
First, it helps to close all file descriptors of an exec()ing task.
This can be done safely via (quoting Al's example from [1] verbatim):
/* that exec is sensitive */
unshare(CLONE_FILES);
/* we don't want anything past stderr here */
close_range(3, ~0U);
execve(....);
The code snippet above is one way of working around the problem that
file descriptors are not cloexec by default. This is aggravated by the
fact that we can't just switch them over without massively regressing
userspace. For a whole class of programs having an in-kernel method of
closing all file descriptors is very helpful (e.g. demons, service
managers, programming language standard libraries, container managers
etc.).
Second, it allows userspace to avoid implementing closing all file
descriptors by parsing through /proc/<pid>/fd/* and calling close() on
each file descriptor and other hacks. From looking at various
large(ish) userspace code bases this or similar patterns are very
common in service managers, container runtimes, and programming
language runtimes/standard libraries such as Python or Rust.
In addition, the syscall will also work for tasks that do not have
procfs mounted and on kernels that do not have procfs support compiled
in. In such situations the only way to make sure that all file
descriptors are closed is to call close() on each file descriptor up
to UINT_MAX or RLIMIT_NOFILE, OPEN_MAX trickery.
Based on Linus' suggestion close_range() also comes with a new flag
CLOSE_RANGE_UNSHARE to more elegantly handle file descriptor dropping
right before exec. This would usually be expressed in the sequence:
unshare(CLONE_FILES);
close_range(3, ~0U);
as pointed out by Linus it might be desirable to have this be a part
of close_range() itself under a new flag CLOSE_RANGE_UNSHARE which
gets especially handy when we're closing all file descriptors above a
certain threshold.
Test-suite as always included"
* tag 'close-range-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
tests: add CLOSE_RANGE_UNSHARE tests
close_range: add CLOSE_RANGE_UNSHARE
tests: add close_range() tests
arch: wire-up close_range()
open: add close_range()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXyge/QAKCRCRxhvAZXjc
oildAQCCWpnTeXm6hrIE3VZ36X5npFtbaEthdBVAUJM7mo0FYwEA8+Wbnubg6jCw
mztkXCnTfU7tApUdhKtQzcpEws45/Qk=
=REE/
-----END PGP SIGNATURE-----
Merge tag 'fork-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull fork cleanups from Christian Brauner:
"This is cleanup series from when we reworked a chunk of the process
creation paths in the kernel and switched to struct
{kernel_}clone_args.
High-level this does two main things:
- Remove the double export of both do_fork() and _do_fork() where
do_fork() used the incosistent legacy clone calling convention.
Now we only export _do_fork() which is based on struct
kernel_clone_args.
- Remove the copy_thread_tls()/copy_thread() split making the
architecture specific HAVE_COYP_THREAD_TLS config option obsolete.
This switches all remaining architectures to select
HAVE_COPY_THREAD_TLS and thus to the copy_thread_tls() calling
convention. The current split makes the process creation codepaths
more convoluted than they need to be. Each architecture has their own
copy_thread() function unless it selects HAVE_COPY_THREAD_TLS then it
has a copy_thread_tls() function.
The split is not needed anymore nowadays, all architectures support
CLONE_SETTLS but quite a few of them never bothered to select
HAVE_COPY_THREAD_TLS and instead simply continued to use copy_thread()
and use the old calling convention. Removing this split cleans up the
process creation codepaths and paves the way for implementing clone3()
on such architectures since it requires the copy_thread_tls() calling
convention.
After having made each architectures support copy_thread_tls() this
series simply renames that function back to copy_thread(). It also
switches all architectures that call do_fork() directly over to
_do_fork() and the struct kernel_clone_args calling convention. This
is a corollary of switching the architectures that did not yet support
it over to copy_thread_tls() since do_fork() is conditional on not
supporting copy_thread_tls() (Mostly because it lacks a separate
argument for tls which is trivial to fix but there's no need for this
function to exist.).
The do_fork() removal is in itself already useful as it allows to to
remove the export of both do_fork() and _do_fork() we currently have
in favor of only _do_fork(). This has already been discussed back when
we added clone3(). The legacy clone() calling convention is - as is
probably well-known - somewhat odd:
#
# ABI hall of shame
#
config CLONE_BACKWARDS
config CLONE_BACKWARDS2
config CLONE_BACKWARDS3
that is aggravated by the fact that some architectures such as sparc
follow the CLONE_BACKWARDSx calling convention but don't really select
the corresponding config option since they call do_fork() directly.
So do_fork() enforces a somewhat arbitrary calling convention in the
first place that doesn't really help the individual architectures that
deviate from it. They can thus simply be switched to _do_fork()
enforcing a single calling convention. (I really hope that any new
architectures will __not__ try to implement their own calling
conventions...)
Most architectures already have made a similar switch (m68k comes to
mind).
Overall this removes more code than it adds even with a good portion
of added comments. It simplifies a chunk of arch specific assembly
either by moving the code into C or by simply rewriting the assembly.
Architectures that have been touched in non-trivial ways have all been
actually boot and stress tested: sparc and ia64 have been tested with
Debian 9 images. They are the two architectures which have been
touched the most. All non-trivial changes to architectures have seen
acks from the relevant maintainers. nios2 with a custom built
buildroot image. h8300 I couldn't get something bootable to test on
but the changes have been fairly automatic and I'm sure we'll hear
people yell if I broke something there.
All other architectures that have been touched in trivial ways have
been compile tested for each single patch of the series via git rebase
-x "make ..." v5.8-rc2. arm{64} and x86{_64} have been boot tested
even though they have just been trivially touched (removal of the
HAVE_COPY_THREAD_TLS macro from their Kconfig) because well they are
basically "core architectures" and since it is trivial to get your
hands on a useable image"
* tag 'fork-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
arch: rename copy_thread_tls() back to copy_thread()
arch: remove HAVE_COPY_THREAD_TLS
unicore: switch to copy_thread_tls()
sh: switch to copy_thread_tls()
nds32: switch to copy_thread_tls()
microblaze: switch to copy_thread_tls()
hexagon: switch to copy_thread_tls()
c6x: switch to copy_thread_tls()
alpha: switch to copy_thread_tls()
fork: remove do_fork()
h8300: select HAVE_COPY_THREAD_TLS, switch to kernel_clone_args
nios2: enable HAVE_COPY_THREAD_TLS, switch to kernel_clone_args
ia64: enable HAVE_COPY_THREAD_TLS, switch to kernel_clone_args
sparc: unconditionally enable HAVE_COPY_THREAD_TLS
sparc: share process creation helpers between sparc and sparc64
sparc64: enable HAVE_COPY_THREAD_TLS
fork: fold legacy_clone_args_valid() into _do_fork()
Recently random.h started including percpu.h (see commit
f227e3ec3b ("random32: update the net random state on interrupt and
activity")), which broke corenet64_smp_defconfig:
In file included from /linux/arch/powerpc/include/asm/paca.h:18,
from /linux/arch/powerpc/include/asm/percpu.h:13,
from /linux/include/linux/random.h:14,
from /linux/lib/uuid.c:14:
/linux/arch/powerpc/include/asm/mmu.h:139:22: error: unknown type name 'next_tlbcam_idx'
139 | DECLARE_PER_CPU(int, next_tlbcam_idx);
This is due to a circular header dependency:
asm/mmu.h includes asm/percpu.h, which includes asm/paca.h, which
includes asm/mmu.h
Which means DECLARE_PER_CPU() isn't defined when mmu.h needs it.
We can fix it by moving the include of paca.h below the include of
asm-generic/percpu.h.
This moves the include of paca.h out of the #ifdef __powerpc64__, but
that is OK because paca.h is almost entirely inside #ifdef
CONFIG_PPC64 anyway.
It also moves the include of paca.h out of the #ifdef CONFIG_SMP,
which could possibly break something, but seems to have no ill
effects.
Fixes: f227e3ec3b ("random32: update the net random state on interrupt and activity")
Cc: stable@vger.kernel.org # v5.8
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200804130558.292328-1-mpe@ellerman.id.au
- Make the Energy Model cover non-CPU devices (Lukasz Luba).
- Add Ice Lake server idle states table to the intel_idle driver
and eliminate a redundant static variable from it (Chen Yu,
Rafael Wysocki).
- Eliminate all W=1 build warnings from cpufreq (Lee Jones).
- Add support for Sapphire Rapids and for Power Limit 4 to the
Intel RAPL power capping driver (Sumeet Pawnikar, Zhang Rui).
- Fix function name in kerneldoc comments in the idle_inject power
capping driver (Yangtao Li).
- Fix locking issues with cpufreq governors and drop a redundant
"weak" function definition from cpufreq (Viresh Kumar).
- Rearrange cpufreq to register non-modular governors at the
core_initcall level and allow the default cpufreq governor to
be specified in the kernel command line (Quentin Perret).
- Extend, fix and clean up the intel_pstate driver (Srinivas
Pandruvada, Rafael Wysocki):
* Add a new sysfs attribute for disabling/enabling CPU
energy-efficiency optimizations in the processor.
* Make the driver avoid enabling HWP if EPP is not supported.
* Allow the driver to handle numeric EPP values in the sysfs
interface and fix the setting of EPP via sysfs in the active
mode.
* Eliminate a static checker warning and clean up a kerneldoc
comment.
- Clean up some variable declarations in the powernv cpufreq
driver (Wei Yongjun).
- Fix up the ->enter_s2idle callback definition to cover the case
when it points to the same function as ->idle correctly (Neal
Liu).
- Rearrange and clean up the PSCI cpuidle driver (Ulf Hansson).
- Make the PM core emit "changed" uevent when adding/removing the
"wakeup" sysfs attribute of devices (Abhishek Pandit-Subedi).
- Add a helper macro for declaring PM callbacks and use it in the
MMC jz4740 driver (Paul Cercueil).
- Fix white space in some places in the hibernate code and make the
system-wide PM code use "const char *" where appropriate (Xiang
Chen, Alexey Dobriyan).
- Add one more "unsafe" helper macro to the freezer to cover the NFS
use case (He Zhe).
- Change the language in the generic PM domains framework to use
parent/child terminology and clean up a typo and some comment
fromatting in that code (Kees Cook, Geert Uytterhoeven).
- Update the operating performance points OPP framework (Lukasz
Luba, Andrew-sh.Cheng, Valdis Kletnieks):
* Refactor dev_pm_opp_of_register_em() and update related drivers.
* Add a missing function export.
* Allow disabled OPPs in dev_pm_opp_get_freq().
- Update devfreq core and drivers (Chanwoo Choi, Lukasz Luba, Enric
Balletbo i Serra, Dmitry Osipenko, Kieran Bingham, Marc Zyngier):
* Add support for delayed timers to the devfreq core and make the
Samsung exynos5422-dmc driver use it.
* Unify sysfs interface to use "df-" as a prefix in instance names
consistently.
* Fix devfreq_summary debugfs node indentation.
* Add the rockchip,pmu phandle to the rk3399_dmc driver DT
bindings.
* List Dmitry Osipenko as the Tegra devfreq driver maintainer.
* Fix typos in the core devfreq code.
- Update the pm-graph utility to version 5.7 including a number of
fixes related to suspend-to-idle (Todd Brandt).
- Fix coccicheck errors and warnings in the cpupower utility (Shuah
Khan).
- Replace HTTP links with HTTPs ones in multiple places (Alexander
A. Klimov).
-----BEGIN PGP SIGNATURE-----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=8cUO
-----END PGP SIGNATURE-----
Merge tag 'pm-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"The most significant change here is the extension of the Energy Model
to cover non-CPU devices (as well as CPUs) from Lukasz Luba.
There is also some new hardware support (Ice Lake server idle states
table for intel_idle, Sapphire Rapids and Power Limit 4 support in the
RAPL driver), some new functionality in the existing drivers (eg. a
new switch to disable/enable CPU energy-efficiency optimizations in
intel_pstate, delayed timers in devfreq), some assorted fixes (cpufreq
core, intel_pstate, intel_idle) and cleanups (eg. cpuidle-psci,
devfreq), including the elimination of W=1 build warnings from cpufreq
done by Lee Jones.
Specifics:
- Make the Energy Model cover non-CPU devices (Lukasz Luba).
- Add Ice Lake server idle states table to the intel_idle driver and
eliminate a redundant static variable from it (Chen Yu, Rafael
Wysocki).
- Eliminate all W=1 build warnings from cpufreq (Lee Jones).
- Add support for Sapphire Rapids and for Power Limit 4 to the Intel
RAPL power capping driver (Sumeet Pawnikar, Zhang Rui).
- Fix function name in kerneldoc comments in the idle_inject power
capping driver (Yangtao Li).
- Fix locking issues with cpufreq governors and drop a redundant
"weak" function definition from cpufreq (Viresh Kumar).
- Rearrange cpufreq to register non-modular governors at the
core_initcall level and allow the default cpufreq governor to be
specified in the kernel command line (Quentin Perret).
- Extend, fix and clean up the intel_pstate driver (Srinivas
Pandruvada, Rafael Wysocki):
* Add a new sysfs attribute for disabling/enabling CPU
energy-efficiency optimizations in the processor.
* Make the driver avoid enabling HWP if EPP is not supported.
* Allow the driver to handle numeric EPP values in the sysfs
interface and fix the setting of EPP via sysfs in the active
mode.
* Eliminate a static checker warning and clean up a kerneldoc
comment.
- Clean up some variable declarations in the powernv cpufreq driver
(Wei Yongjun).
- Fix up the ->enter_s2idle callback definition to cover the case
when it points to the same function as ->idle correctly (Neal Liu).
- Rearrange and clean up the PSCI cpuidle driver (Ulf Hansson).
- Make the PM core emit "changed" uevent when adding/removing the
"wakeup" sysfs attribute of devices (Abhishek Pandit-Subedi).
- Add a helper macro for declaring PM callbacks and use it in the MMC
jz4740 driver (Paul Cercueil).
- Fix white space in some places in the hibernate code and make the
system-wide PM code use "const char *" where appropriate (Xiang
Chen, Alexey Dobriyan).
- Add one more "unsafe" helper macro to the freezer to cover the NFS
use case (He Zhe).
- Change the language in the generic PM domains framework to use
parent/child terminology and clean up a typo and some comment
fromatting in that code (Kees Cook, Geert Uytterhoeven).
- Update the operating performance points OPP framework (Lukasz Luba,
Andrew-sh.Cheng, Valdis Kletnieks):
* Refactor dev_pm_opp_of_register_em() and update related drivers.
* Add a missing function export.
* Allow disabled OPPs in dev_pm_opp_get_freq().
- Update devfreq core and drivers (Chanwoo Choi, Lukasz Luba, Enric
Balletbo i Serra, Dmitry Osipenko, Kieran Bingham, Marc Zyngier):
* Add support for delayed timers to the devfreq core and make the
Samsung exynos5422-dmc driver use it.
* Unify sysfs interface to use "df-" as a prefix in instance
names consistently.
* Fix devfreq_summary debugfs node indentation.
* Add the rockchip,pmu phandle to the rk3399_dmc driver DT
bindings.
* List Dmitry Osipenko as the Tegra devfreq driver maintainer.
* Fix typos in the core devfreq code.
- Update the pm-graph utility to version 5.7 including a number of
fixes related to suspend-to-idle (Todd Brandt).
- Fix coccicheck errors and warnings in the cpupower utility (Shuah
Khan).
- Replace HTTP links with HTTPs ones in multiple places (Alexander A.
Klimov)"
* tag 'pm-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (71 commits)
cpuidle: ACPI: fix 'return' with no value build warning
cpufreq: intel_pstate: Fix EPP setting via sysfs in active mode
cpufreq: intel_pstate: Rearrange the storing of new EPP values
intel_idle: Customize IceLake server support
PM / devfreq: Fix the wrong end with semicolon
PM / devfreq: Fix indentaion of devfreq_summary debugfs node
PM / devfreq: Clean up the devfreq instance name in sysfs attr
memory: samsung: exynos5422-dmc: Add module param to control IRQ mode
memory: samsung: exynos5422-dmc: Adjust polling interval and uptreshold
memory: samsung: exynos5422-dmc: Use delayed timer as default
PM / devfreq: Add support delayed timer for polling mode
dt-bindings: devfreq: rk3399_dmc: Add rockchip,pmu phandle
PM / devfreq: tegra: Add Dmitry as a maintainer
PM / devfreq: event: Fix trivial spelling
PM / devfreq: rk3399_dmc: Fix kernel oops when rockchip,pmu is absent
cpuidle: change enter_s2idle() prototype
cpuidle: psci: Prevent domain idlestates until consumers are ready
cpuidle: psci: Convert PM domain to platform driver
cpuidle: psci: Fix error path via converting to a platform driver
cpuidle: psci: Fail cpuidle registration if set OSI mode failed
...
- LKMM updates: mostly documentation changes, but also some new litmus tests for atomic ops.
- KCSAN updates: the most important change is that GCC 11 now has all fixes in place
to support KCSAN, so GCC support can be enabled again. Also more annotations.
- futex updates: minor cleanups and simplifications
- seqlock updates: merge preparatory changes/cleanups for the 'associated locks' facilities.
- lockdep updates:
- simplify IRQ trace event handling
- add various new debug checks
- simplify header dependencies, split out <linux/lockdep_types.h>, decouple
lockdep from other low level headers some more
- fix NMI handling
- misc cleanups and smaller fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=3MTT
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- LKMM updates: mostly documentation changes, but also some new litmus
tests for atomic ops.
- KCSAN updates: the most important change is that GCC 11 now has all
fixes in place to support KCSAN, so GCC support can be enabled again.
Also more annotations.
- futex updates: minor cleanups and simplifications
- seqlock updates: merge preparatory changes/cleanups for the
'associated locks' facilities.
- lockdep updates:
- simplify IRQ trace event handling
- add various new debug checks
- simplify header dependencies, split out <linux/lockdep_types.h>,
decouple lockdep from other low level headers some more
- fix NMI handling
- misc cleanups and smaller fixes
* tag 'locking-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
kcsan: Improve IRQ state trace reporting
lockdep: Refactor IRQ trace events fields into struct
seqlock: lockdep assert non-preemptibility on seqcount_t write
lockdep: Add preemption enabled/disabled assertion APIs
seqlock: Implement raw_seqcount_begin() in terms of raw_read_seqcount()
seqlock: Add kernel-doc for seqcount_t and seqlock_t APIs
seqlock: Reorder seqcount_t and seqlock_t API definitions
seqlock: seqcount_t latch: End read sections with read_seqcount_retry()
seqlock: Properly format kernel-doc code samples
Documentation: locking: Describe seqlock design and usage
locking/qspinlock: Do not include atomic.h from qspinlock_types.h
locking/atomic: Move ATOMIC_INIT into linux/types.h
lockdep: Move list.h inclusion into lockdep.h
locking/lockdep: Fix TRACE_IRQFLAGS vs. NMIs
futex: Remove unused or redundant includes
futex: Consistently use fshared as boolean
futex: Remove needless goto's
futex: Remove put_futex_key()
rwsem: fix commas in initialisation
docs: locking: Replace HTTP links with HTTPS ones
...
Initialising the value before using it is generally regarded as a good
idea so do that.
Fixes: 4c51f3e1e8 ("powerpc/powernv/sriov: Make single PE mode a per-BAR setting")
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200803075408.132601-1-oohall@gmail.com
The assembler says:
arch/powerpc/kernel/head_40x.S:623: Warning: invalid register expression
It's objecting to the use of r0 as the RA argument. That's because
when RA = 0 the literal value 0 is used, rather than the content of
r0, making the use of r0 in the source potentially confusing.
Fix it to use a literal 0, the generated code is identical.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722022422.825197-1-mpe@ellerman.id.au
* pm-cpufreq: (24 commits)
cpufreq: intel_pstate: Fix EPP setting via sysfs in active mode
cpufreq: intel_pstate: Rearrange the storing of new EPP values
cpufreq: intel_pstate: Avoid enabling HWP if EPP is not supported
cpufreq: intel_pstate: Clean up aperf_mperf_shift description
cpufreq: powernv: Make some symbols static
cpufreq: amd_freq_sensitivity: Mark sometimes used ID structs as __maybe_unused
cpufreq: intel_pstate: Supply struct attribute description for get_aperf_mperf_shift()
cpufreq: pcc-cpufreq: Mark sometimes used ID structs as __maybe_unused
cpufreq: powernow-k8: Mark 'hi' and 'lo' dummy variables as __always_unused
cpufreq: acpi-cpufreq: Mark sometimes used ID structs as __maybe_unused
cpufreq: acpi-cpufreq: Mark 'dummy' variable as __always_unused
cpufreq: powernv-cpufreq: Fix a bunch of kerneldoc related issues
cpufreq: pasemi: Include header file for {check,restore}_astate prototypes
cpufreq: cpufreq_governor: Demote store_sampling_rate() header to standard comment block
cpufreq: cpufreq: Demote lots of function headers unworthy of kerneldoc status
cpufreq: freq_table: Demote obvious misuse of kerneldoc to standard comment blocks
cpufreq: Replace HTTP links with HTTPS ones
cpufreq: intel_pstate: Fix static checker warning for epp variable
cpufreq: Remove the weakly defined cpufreq_default_governor()
cpufreq: Specify default governor on command line
...
We add support for reporting 'fuel-gauge' NVDIMM metric via
PAPR_PDSM_HEALTH pdsm payload. 'fuel-gauge' metric indicates the usage
life remaining of a papr-scm compatible NVDIMM. PHYP exposes this
metric via the H_SCM_PERFORMANCE_STATS.
The metric value is returned from the pdsm by extending the return
payload 'struct nd_papr_pdsm_health' without breaking the ABI. A new
field 'dimm_fuel_gauge' to hold the metric value is introduced at the
end of the payload struct and its presence is indicated by by
extension flag PDSM_DIMM_HEALTH_RUN_GAUGE_VALID.
The patch introduces a new function papr_pdsm_fuel_gauge() that is
called from papr_pdsm_health(). If fetching NVDIMM performance stats
is supported then 'papr_pdsm_fuel_gauge()' allocated an output buffer
large enough to hold the performance stat and passes it to
drc_pmem_query_stats() that issues the HCALL to PHYP. The return value
of the stat is then populated in the 'struct
nd_papr_pdsm_health.dimm_fuel_gauge' field with extension flag
'PDSM_DIMM_HEALTH_RUN_GAUGE_VALID' set in 'struct
nd_papr_pdsm_health.extension_flags'
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200731064153.182203-3-vaibhav@linux.ibm.com
Update papr_scm.c to query dimm performance statistics from PHYP via
H_SCM_PERFORMANCE_STATS hcall and export them to user-space as PAPR
specific NVDIMM attribute 'perf_stats' in sysfs. The patch also
provide a sysfs ABI documentation for the stats being reported and
their meanings.
During NVDIMM probe time in papr_scm_nvdimm_init() a special variant
of H_SCM_PERFORMANCE_STATS hcall is issued to check if collection of
performance statistics is supported or not. If successful then a PHYP
returns a maximum possible buffer length needed to read all
performance stats. This returned value is stored in a per-nvdimm
attribute 'stat_buffer_len'.
The layout of request buffer for reading NVDIMM performance stats from
PHYP is defined in 'struct papr_scm_perf_stats' and 'struct
papr_scm_perf_stat'. These structs are used in newly introduced
drc_pmem_query_stats() that issues the H_SCM_PERFORMANCE_STATS hcall.
The sysfs access function perf_stats_show() uses value
'stat_buffer_len' to allocate a buffer large enough to hold all
possible NVDIMM performance stats and passes it to
drc_pmem_query_stats() to populate. Finally statistics reported in the
buffer are formatted into the sysfs access function output buffer.
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200731064153.182203-2-vaibhav@linux.ibm.com
perf_callchain_user_64() and perf_callchain_user_32() are nearly
identical. Consolidate into one function with thin wrappers.
Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
[mpe: Adapt to copy_from_user_nofault(), minor formatting]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200406210022.32265-1-msuchanek@suse.de
In the unlikely event that the device tree lacks a /cpus node,
find_dlpar_cpus_to_add() oddly frees the cpu_drcs buffer it has been
passed before returning an error. Its only caller also frees the
buffer on error.
Remove the less conventional kfree() of a caller-supplied buffer from
find_dlpar_cpus_to_add().
Fixes: 90edf184b9 ("powerpc/pseries: Add CPU dlpar add functionality")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190919231633.1344-1-nathanl@linux.ibm.com
When investigating issues with partition migration or resource
reassignments it is helpful to have a log of which nodes and
properties in the device tree have changed. Use pr_debug() so it's
easy to enable these at runtime with the dynamic debug facility.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190627053044.9238-3-nathanl@linux.ibm.com
The pr_err() callsites in mobility.c already manually include a
"mobility:" prefix, let's make it official for the benefit of messages
to be added later.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190627053044.9238-2-nathanl@linux.ibm.com
This can catch cases where the device tree has gotten mishandled into
an inconsistent state at runtime, e.g. the cache nodes for both the
source and the destination are present after a migration.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190627051537.7298-5-nathanl@linux.ibm.com
If we have a bug which causes us to start with the wrong kind of OF
node when linking up the cache tree, it's helpful for debugging to
print information about what we found vs what we expected. So replace
uses of WARN_ON_ONCE with WARN_ONCE, which lets us include an
informative message instead of a contentless backtrace.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190627051537.7298-4-nathanl@linux.ibm.com
We know that every OF node we deal with in this code is under /cpus,
so we can make the debug messages a little less verbose without losing
information.
E.g.
cacheinfo: creating L1 dcache and icache for /cpus/PowerPC,POWER8@0
cacheinfo: creating L2 ucache for /cpus/l2-cache@2006
cacheinfo: creating L3 ucache for /cpus/l3-cache@3106
becomes
cacheinfo: creating L1 dcache and icache for PowerPC,POWER8@0
cacheinfo: creating L2 ucache for l2-cache@2006
cacheinfo: creating L3 ucache for l3-cache@3106
Replace all '%pOF' specifiers with '%pOFP'.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190627051537.7298-3-nathanl@linux.ibm.com
Certain warnings are emitted for powerpc code when building with a gcc-10
toolset:
WARNING: modpost: vmlinux.o(.text.unlikely+0x377c): Section mismatch in
reference from the function remove_pmd_table() to the function
.meminit.text:split_kernel_mapping()
The function remove_pmd_table() references
the function __meminit split_kernel_mapping().
This is often because remove_pmd_table lacks a __meminit
annotation or the annotation of split_kernel_mapping is wrong.
Add the appropriate __init and __meminit annotations to make modpost not
complain. In all the cases there are just a single callsite from another
__init or __meminit function:
__meminit remove_pagetable() -> remove_pud_table() -> remove_pmd_table()
__init prom_init() -> setup_secure_guest()
__init xive_spapr_init() -> xive_spapr_disabled()
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200729133741.62789-1-vdronov@redhat.com
This patch moves ATOMIC_INIT from asm/atomic.h into linux/types.h.
This allows users of atomic_t to use ATOMIC_INIT without having to
include atomic.h as that way may lead to header loops.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Link: https://lkml.kernel.org/r/20200729123105.GB7047@gondor.apana.org.au
Kernels built with CONFIG_PPC_EARLY_DEBUG_OPAL enabled expects r8 & r9
to be filled with OPAL base & entry addresses respectively. Setting
these registers allows the kernel to perform OPAL calls before the
device tree is parsed.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/159602303975.575379.5032301944162937479.stgit@hbathini
The kexec purgatory has to run in real mode. Only the first memory
block maybe accessible in real mode. And, unlike the case with panic
kernel, no memory is set aside for regular kexec load. Another thing
to note is, the memory for crashkernel is reserved at an offset of
128MB. So, when crashkernel memory is reserved, the memory ranges to
load kexec segments shrink further as the generic code only looks for
memblock free memory ranges and in all likelihood only a tiny bit of
memory from 0 to 128MB would be available to load kexec segments.
With kdump being used by default in general, kexec file load is likely
to fail almost always. This can be fixed by changing the memory hole
lookup logic for regular kexec to use the same method as kdump. This
would mean that most kexec segments will overlap with crashkernel
memory region. That should still be ok as the pages, whose destination
address isn't available while loading, are placed in an intermediate
location till a flush to the actual destination address happens during
kexec boot sequence.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Tested-by: Pingfan Liu <piliu@redhat.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/159602302326.575379.14038896654942043093.stgit@hbathini
While initrd, elfcorehdr and backup regions are already added to the
reserve map, there are a few missing regions that need to be added to
the memory reserve map. Add them here. And now that all the changes to
load panic kernel are in place, claim likewise.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Tested-by: Pingfan Liu <piliu@redhat.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/159602300473.575379.4218568032039284448.stgit@hbathini
Prepare elf headers for the crashing kernel's core file using
crash_prepare_elf64_headers() and pass on this info to kdump kernel by
updating its command line with elfcorehdr parameter. Also, add
elfcorehdr location to reserve map to avoid it from being stomped on
while booting.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Tested-by: Pingfan Liu <piliu@redhat.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
[mpe: Ensure cmdline is nul terminated]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/159602298855.575379.15819225623219909517.stgit@hbathini
Though kdump kernel boots from loaded address, the first 64KB of it is
copied down to real 0. So, setup a backup region and let purgatory
copy the first 64KB of crashed kernel into this backup region before
booting into kdump kernel. Update reserve map with backup region and
crashed kernel's memory to avoid kdump kernel from accidentially using
that memory.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/159602294718.575379.16216507537038008623.stgit@hbathini
Kdump kernel, used for capturing the kernel core image, is supposed
to use only specific memory regions to avoid corrupting the image to
be captured. The regions are crashkernel range - the memory reserved
explicitly for kdump kernel, memory used for the tce-table, the OPAL
region and RTAS region as applicable. Restrict kdump kernel memory
to use only these regions by setting up usable-memory DT property.
Also, tell the kdump kernel to run at the loaded address by setting
the magic word at 0x5c.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Tested-by: Pingfan Liu <piliu@redhat.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/159602284284.575379.6962016255404325493.stgit@hbathini
Currently, numa & prom are the only users of drmem LMB walk code.
Loading kdump with kexec_file also needs to walk the drmem LMBs to
setup the usable memory ranges for kdump kernel. But there are couple
of issues in using the code as is. One, walk_drmem_lmb() code is built
into the .init section currently, while kexec_file needs it later.
Two, there is no scope to pass data to the callback function for
processing and/or erroring out on certain conditions.
Fix that by, moving drmem LMB walk code out of .init section, adding
scope to pass data to the callback function and bailing out when an
error is encountered in the callback function.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Tested-by: Pingfan Liu <piliu@redhat.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/159602282727.575379.3979857013827701828.stgit@hbathini
crashkernel region could have an overlap with special memory regions
like OPAL, RTAS, TCE table & such. These regions are referred to as
excluded memory ranges. Setup these ranges during image probe in order
to avoid them while finding the buffer for different kdump segments.
Override arch_kexec_locate_mem_hole() to locate a memory hole taking
these ranges into account.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/159602281047.575379.6636807148335160795.stgit@hbathini
In kexec case, the kernel to be loaded uses the same memory layout as
the running kernel. So, passing on the DT of the running kernel would
be good enough.
But in case of kdump, different memory ranges are needed to manage
loading the kdump kernel, booting into it and exporting the elfcore of
the crashing kernel. The ranges are exclude memory ranges, usable
memory ranges, reserved memory ranges and crash memory ranges.
Exclude memory ranges specify the list of memory ranges to avoid while
loading kdump segments. Usable memory ranges list the memory ranges
that could be used for booting kdump kernel. Reserved memory ranges
list the memory regions for the loading kernel's reserve map. Crash
memory ranges list the memory ranges to be exported as the crashing
kernel's elfcore.
Add helper functions for setting up the above mentioned memory ranges.
This helpers facilitate in understanding the subsequent changes better
and make it easy to setup the different memory ranges listed above, as
and when appropriate.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Tested-by: Pingfan Liu <piliu@redhat.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/159602279194.575379.8526552316948643550.stgit@hbathini
Some of the kexec_file_load code isn't PPC64 specific. Move PPC64
specific code from kexec/file_load.c to kexec/file_load_64.c. Also,
rename purgatory/trampoline.S to purgatory/trampoline_64.S in the same
spirit. No functional changes.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Tested-by: Pingfan Liu <piliu@redhat.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/159602276920.575379.10390965946438306388.stgit@hbathini
I've forgotten to manually enable NVME when building pseries kernels
for machines with NVME adapters. Since it's a reasonably common
configuration, enable it by default.
Signed-off-by: Anton Blanchard <anton@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200729040828.2312966-1-anton@ozlabs.org
With the proposed change in percpu bootmem allocator to use page
mapping [1], the percpu first chunk memory area can come from vmalloc
ranges. This makes the HMI (Hypervisor Maintenance Interrupt) handler
crash the kernel whenever percpu variable is accessed in real mode.
This patch fixes this issue by moving the HMI IRQ stat inside paca for
safe access in realmode.
[1] https://lore.kernel.org/linuxppc-dev/20200608070904.387440-1-aneesh.kumar@linux.ibm.com/
Suggested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/159290806973.3642154.5244613424529764050.stgit@jupiter
This just adds the zl2006 voltage regulators / power monitors and the
onboard I2C eeproms. The ICS9FG108 clock chip doesn't seem to have a
driver, so it is left in the DTS as a comment. And for good measure,
the SPD eeproms are tagged as such.
Signed-off-by: David Lamparter <equinox@diac24.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20180920230422.GK487685@eidolon.nox.tf
Function declarations don't need externs, remove the existing ones
so they are consistent with newer code
Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200415012343.919255-2-alastair@d-silva.org
Add testcases for divde, divde., divdeu, divdeu. emulated instructions
to cover few scenarios,
- with same dividend and divisor to have undefine RT
for divdeu[.]
- with divide by zero to have undefine RT for both
divde[.] and divdeu[.]
- with negative dividend to cover -|divisor| < r <= 0 if
the dividend is negative for divde[.]
- normal case with proper dividend and divisor for both
divde[.] and divdeu[.]
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
Reviewed-by: Sandipan Das <sandipan@linux.ibm.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200728130308.1790982-4-bala24@linux.ibm.com
Include instruction opcodes for divde and divdeu as macros.
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
Reviewed-by: Sandipan Das <sandipan@linux.ibm.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200728130308.1790982-2-bala24@linux.ibm.com
Gcc report warning as follows:
arch/powerpc/platforms/powernv/pci-sriov.c:602:25: warning:
variable 'phb' set but not used [-Wunused-but-set-variable]
602 | struct pnv_phb *phb;
| ^~~
This variable is not used, so this commit removing it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200727171112.2781-1-weiyongjun1@huawei.com
This adds a kernel command line option that can be used to disable GTSE support.
Disabling GTSE implies kernel will make hcalls to invalidate TLB entries.
This was done so that we can do VM migration between configs that enable/disable
GTSE support via hypervisor. To migrate a VM from a system that supports
GTSE to a system that doesn't, we can boot the guest with
radix_hcall_invalidate=on, thereby forcing the guest to use hcalls for TLB
invalidates.
The check for hcall availability is done in pSeries_setup_arch so that
the panic message appears on the console. This should only happen on
a hypervisor that doesn't force the guest to hash translation even
though it can't handle the radix GTSE=0 request via CAS. With
radix_hcall_invalidate=on if the hypervisor doesn't support hcall_rpt_invalidate
hcall it should force the LPAR to hash translation.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Tested-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200727085908.420806-1-aneesh.kumar@linux.ibm.com
Current kernel gives:
[ 0.000000] cma: Reserved 26224 MiB at 0x0000007959000000
[ 0.000000] hugetlb_cma: reserve 65536 MiB, up to 16384 MiB per node
[ 0.000000] cma: Reserved 16384 MiB at 0x0000001800000000
With the fix
[ 0.000000] kvm_cma_reserve: reserving 26214 MiB for global area
[ 0.000000] cma: Reserved 26224 MiB at 0x0000007959000000
[ 0.000000] hugetlb_cma: reserve 65536 MiB, up to 16384 MiB per node
[ 0.000000] cma: Reserved 16384 MiB at 0x0000001800000000
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200713150749.25245-2-aneesh.kumar@linux.ibm.com
commit: cf11e85fc0 ("mm: hugetlb: optionally allocate gigantic hugepages using cma")
added support for allocating gigantic hugepages using CMA. This patch
enables the same for powerpc
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200713150749.25245-1-aneesh.kumar@linux.ibm.com
Data Cache Block Invalidate (dcbi) instruction implemented back in
PowerPC architecture version 2.03. But as per Power Processor Users Manual
it is obsolete and not supported by POWER8/POWER9 core. Attempt to use of
this illegal instruction results in a hypervisor emulation assistance
interrupt. So, ifdef it out the option `i` in xmon for 64bit Book3S.
0:mon> fi
cpu 0x0: Vector: 700 (Program Check) at [c000000003be74a0]
pc: c000000000102030: cacheflush+0x180/0x1a0
lr: c000000000101f3c: cacheflush+0x8c/0x1a0
sp: c000000003be7730
msr: 8000000000081033
current = 0xc0000000035e5c00
paca = 0xc000000001910000 irqmask: 0x03 irq_happened: 0x01
pid = 1025, comm = bash
Linux version 5.6.0-rc5-g5aa19adac (root@ltc-wspoon6) (gcc version 7.4.0
(Ubuntu 7.4.0-1ubuntu1~18.04.1)) #1 SMP Tue Mar 10 04:38:41 CDT 2020
cpu 0x0: Exception 700 (Program Check) in xmon, returning to main loop
[c000000003be7c50] c00000000084abb0 __handle_sysrq+0xf0/0x2a0
[c000000003be7d00] c00000000084b3c0 write_sysrq_trigger+0xb0/0xe0
[c000000003be7d30] c0000000004d1edc proc_reg_write+0x8c/0x130
[c000000003be7d60] c00000000040dc7c __vfs_write+0x3c/0x70
[c000000003be7d80] c000000000410e70 vfs_write+0xd0/0x210
[c000000003be7dd0] c00000000041126c ksys_write+0xdc/0x130
[c000000003be7e20] c00000000000b9d0 system_call+0x5c/0x68
--- Exception: c01 (System Call) at 00007fffa345e420
SP (7ffff0b08ab0) is in userspace
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200330075954.538773-1-bala24@linux.ibm.com
There's a comment in time.h referring to CONFIG_POWER, which doesn't
exist. That confuses scripts/checkkconfigsymbols.py.
Presumably the comment was referring to a CONFIG_POWER vs CONFIG_PPC,
in which case for CONFIG_POWER we would #define __USE_RTC to 1. But
instead we have CONFIG_PPC_BOOK3S_601, and these days we have
IS_ENABLED().
So the comment is no longer relevant, drop it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724131728.1643966-9-mpe@ellerman.id.au
Commit 866bfc75f4 ("powerpc: conditionally compile platform-specific
serial drivers") made some code depend on CONFIG_PPC_MPC52XX, which
doesn't exist.
Fix it to use CONFIG_PPC_MPC52xx.
Fixes: 866bfc75f4 ("powerpc: conditionally compile platform-specific serial drivers")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724131728.1643966-7-mpe@ellerman.id.au
All 32 and 64-bit builds that don't have CONFIG_TAU_INT enabled (all
of them), get a definition of TAUException() in traps.c.
On 64-bit it's completely useless, and just wastes ~120 bytes of text.
On 32-bit it allows the kernel to link because head_32.S calls it
unconditionally.
Instead follow the example of altivec_assist_exception(), and if
CONFIG_TAU_INT is not enabled just point it at unknown_exception using
the preprocessor.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724131728.1643966-6-mpe@ellerman.id.au
We have two uses of CONFIG_BOOK3S_601, which doesn't exist. Fix them
to use CONFIG_PPC_BOOK3S_601 which is the correct symbol.
Fixes: 12c3f1fd87 ("powerpc/32s: get rid of CPU_FTR_601 feature")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724131728.1643966-5-mpe@ellerman.id.au
This code was merged 11 years ago in commit 13363ab9b9 ("powerpc:
Add definitions used by exception handling on 64-bit Book3E") but was
never able to be built because CONFIG_BOOK3E_MMU_TLB_STATS never
existed. Remove it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724131728.1643966-4-mpe@ellerman.id.au
There's a comment in lite5200_sleep.S that refers to "CONFIG_BDI*".
This confuses scripts/checkkconfigsymbols.py, which thinks it should
be able to find CONFIG_BDI.
Change the comment to refer to CONFIG_BDI_SWITCH which is presumably
roughly what it was referring to. AFAICS there never has been a
CONFIG_BDI.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724131728.1643966-3-mpe@ellerman.id.au
During memory hotplug and unplug, resize_hpt_for_hotplug() gets called
for both hash and radix guests but it should be called only for hash
guests. Though the call does nothing in the radix guest case, it is
cleaner to push this call into hash specific memory hotplug routines.
Reported-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200727095704.1432916-1-bharata@linux.ibm.com
We have powerpc specific logic in our page fault handling to decide if
an access to an unmapped address below the stack pointer should expand
the stack VMA.
The logic aims to prevent userspace from doing bad accesses below the
stack pointer. However as long as the stack is < 1MB in size, we allow
all accesses without further checks. Adding some debug I see that I
can do a full kernel build and LTP run, and not a single process has
used more than 1MB of stack. So for the majority of processes the
logic never even fires.
We also recently found a nasty bug in this code which could cause
userspace programs to be killed during signal delivery. It went
unnoticed presumably because most processes use < 1MB of stack.
The generic mm code has also grown support for stack guard pages since
this code was originally written, so the most heinous case of the
stack expanding into other mappings is now handled for us.
Finally although some other arches have special logic in this path,
from what I can tell none of x86, arm64, arm and s390 impose any extra
checks other than those in expand_stack().
So drop our complicated logic and like other architectures just let
the stack expand as long as its within the rlimit.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Daniel Axtens <dja@axtens.net>
Link: https://lore.kernel.org/r/20200724092528.1578671-4-mpe@ellerman.id.au
We have powerpc specific logic in our page fault handling to decide if
an access to an unmapped address below the stack pointer should expand
the stack VMA.
The code was originally added in 2004 "ported from 2.4". The rough
logic is that the stack is allowed to grow to 1MB with no extra
checking. Over 1MB the access must be within 2048 bytes of the stack
pointer, or be from a user instruction that updates the stack pointer.
The 2048 byte allowance below the stack pointer is there to cover the
288 byte "red zone" as well as the "about 1.5kB" needed by the signal
delivery code.
Unfortunately since then the signal frame has expanded, and is now
4224 bytes on 64-bit kernels with transactional memory enabled. This
means if a process has consumed more than 1MB of stack, and its stack
pointer lies less than 4224 bytes from the next page boundary, signal
delivery will fault when trying to expand the stack and the process
will see a SEGV.
The total size of the signal frame is the size of struct rt_sigframe
(which includes the red zone) plus __SIGNAL_FRAMESIZE (128 bytes on
64-bit).
The 2048 byte allowance was correct until 2008 as the signal frame
was:
struct rt_sigframe {
struct ucontext uc; /* 0 1440 */
/* --- cacheline 11 boundary (1408 bytes) was 32 bytes ago --- */
long unsigned int _unused[2]; /* 1440 16 */
unsigned int tramp[6]; /* 1456 24 */
struct siginfo * pinfo; /* 1480 8 */
void * puc; /* 1488 8 */
struct siginfo info; /* 1496 128 */
/* --- cacheline 12 boundary (1536 bytes) was 88 bytes ago --- */
char abigap[288]; /* 1624 288 */
/* size: 1920, cachelines: 15, members: 7 */
/* padding: 8 */
};
1920 + 128 = 2048
Then in commit ce48b21007 ("powerpc: Add VSX context save/restore,
ptrace and signal support") (Jul 2008) the signal frame expanded to
2304 bytes:
struct rt_sigframe {
struct ucontext uc; /* 0 1696 */ <--
/* --- cacheline 13 boundary (1664 bytes) was 32 bytes ago --- */
long unsigned int _unused[2]; /* 1696 16 */
unsigned int tramp[6]; /* 1712 24 */
struct siginfo * pinfo; /* 1736 8 */
void * puc; /* 1744 8 */
struct siginfo info; /* 1752 128 */
/* --- cacheline 14 boundary (1792 bytes) was 88 bytes ago --- */
char abigap[288]; /* 1880 288 */
/* size: 2176, cachelines: 17, members: 7 */
/* padding: 8 */
};
2176 + 128 = 2304
At this point we should have been exposed to the bug, though as far as
I know it was never reported. I no longer have a system old enough to
easily test on.
Then in 2010 commit 320b2b8de1 ("mm: keep a guard page below a
grow-down stack segment") caused our stack expansion code to never
trigger, as there was always a VMA found for a write up to PAGE_SIZE
below r1.
That meant the bug was hidden as we continued to expand the signal
frame in commit 2b0a576d15 ("powerpc: Add new transactional memory
state to the signal context") (Feb 2013):
struct rt_sigframe {
struct ucontext uc; /* 0 1696 */
/* --- cacheline 13 boundary (1664 bytes) was 32 bytes ago --- */
struct ucontext uc_transact; /* 1696 1696 */ <--
/* --- cacheline 26 boundary (3328 bytes) was 64 bytes ago --- */
long unsigned int _unused[2]; /* 3392 16 */
unsigned int tramp[6]; /* 3408 24 */
struct siginfo * pinfo; /* 3432 8 */
void * puc; /* 3440 8 */
struct siginfo info; /* 3448 128 */
/* --- cacheline 27 boundary (3456 bytes) was 120 bytes ago --- */
char abigap[288]; /* 3576 288 */
/* size: 3872, cachelines: 31, members: 8 */
/* padding: 8 */
/* last cacheline: 32 bytes */
};
3872 + 128 = 4000
And commit 573ebfa660 ("powerpc: Increase stack redzone for 64-bit
userspace to 512 bytes") (Feb 2014):
struct rt_sigframe {
struct ucontext uc; /* 0 1696 */
/* --- cacheline 13 boundary (1664 bytes) was 32 bytes ago --- */
struct ucontext uc_transact; /* 1696 1696 */
/* --- cacheline 26 boundary (3328 bytes) was 64 bytes ago --- */
long unsigned int _unused[2]; /* 3392 16 */
unsigned int tramp[6]; /* 3408 24 */
struct siginfo * pinfo; /* 3432 8 */
void * puc; /* 3440 8 */
struct siginfo info; /* 3448 128 */
/* --- cacheline 27 boundary (3456 bytes) was 120 bytes ago --- */
char abigap[512]; /* 3576 512 */ <--
/* size: 4096, cachelines: 32, members: 8 */
/* padding: 8 */
};
4096 + 128 = 4224
Then finally in 2017, commit 1be7107fbe ("mm: larger stack guard
gap, between vmas") exposed us to the existing bug, because it changed
the stack VMA to be the correct/real size, meaning our stack expansion
code is now triggered.
Fix it by increasing the allowance to 4224 bytes.
Hard-coding 4224 is obviously unsafe against future expansions of the
signal frame in the same way as the existing code. We can't easily use
sizeof() because the signal frame structure is not in a header. We
will either fix that, or rip out all the custom stack expansion
checking logic entirely.
Fixes: ce48b21007 ("powerpc: Add VSX context save/restore, ptrace and signal support")
Cc: stable@vger.kernel.org # v2.6.27+
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Tested-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724092528.1578671-2-mpe@ellerman.id.au
KVM guests have certain restrictions and performance quirks when using
doorbells. This patch moves the EPAPR KVM guest test so it can be shared
with PSERIES, and uses that in doorbell setup code to apply the KVM
guest quirks and improves IPI performance for two cases:
- PowerVM guests may now use doorbells even if they are secure.
- KVM guests no longer use doorbells if XIVE is available.
There is a valid complaint that "KVM guest" is not a very reasonable
thing to test for, it's preferable for the hypervisor to advertise
particular behaviours to the guest so they could change if the
hypervisor implementation or configuration changes. However in this case
we were already assuming a KVM guest worst case, so this patch is about
containing those quirks. If KVM later advertises fast doorbells, we
should test for that and override the quirks.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200726035155.1424103-4-npiggin@gmail.com
KVM supports msgsndp in guests by trapping and emulating the
instruction, so it was decided to always use XIVE for IPIs if it is
available. However on PowerVM systems, msgsndp can be used and gives
better performance. On large systems, high XIVE interrupt rates can
have sub-linear scaling, and using msgsndp can reduce the load on
the interrupt controller.
So switch to using core local doorbells even if XIVE is available.
This reduces performance for KVM guests with an SMT topology by
about 50% for ping-pong context switching between SMT vCPUs. An
option vector (or dt-cpu-ftrs) could be defined to disable msgsndp
to get KVM performance back.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200726035155.1424103-3-npiggin@gmail.com
These are only called in one place for a given platform, so inline
them for performance.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
[mpe: Fix build errors related to KVM]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200726035155.1424103-2-npiggin@gmail.com
Commit 9908c826d5 ("powerpc/perf: Add Power10 PMU feature to DT CPU
features") defines MMCRA_BHRB_DISABLE as `0x2000000000UL`. Binutils
version less than 2.28 doesn't support UL suffix.
arch/powerpc/kernel/cpu_setup_power.S: Assembler messages:
arch/powerpc/kernel/cpu_setup_power.S:250: Error: found 'L', expected: ')'
arch/powerpc/kernel/cpu_setup_power.S:250: Error: junk at end of line, first unrecognized character is `L'
arch/powerpc/kernel/cpu_setup_power.S:250: Error: found 'L', expected: ')'
arch/powerpc/kernel/cpu_setup_power.S:250: Error: found 'L', expected: ')'
arch/powerpc/kernel/cpu_setup_power.S:250: Error: junk at end of line, first unrecognized character is `L'
arch/powerpc/kernel/cpu_setup_power.S:250: Error: found 'L', expected: ')'
arch/powerpc/kernel/cpu_setup_power.S:250: Error: found 'L', expected: ')'
arch/powerpc/kernel/cpu_setup_power.S:250: Error: operand out of range (0x0000002000000000 is not between 0xffffffffffff8000 and 0x000000000000ffff)
Fix this by wrapping it with the `_UL` macro.
Fixes: 9908c826d5 ("Add Power10 PMU feature to DT CPU features")
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1595996214-5833-1-git-send-email-atrajeev@linux.vnet.ibm.com
The src_owner field in struct migrate_vma is being used for two purposes,
it acts as a selection filter for which types of pages are to be migrated
and it identifies device private pages owned by the caller.
Split this into separate parameters so the src_owner field can be used
just to identify device private pages owned by the caller of
migrate_vma_setup().
Rename the src_owner field to pgmap_owner to reflect it is now used only
to identify which device private pages to migrate.
Link: https://lore.kernel.org/r/20200723223004.9586-3-rcampbell@nvidia.com
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When a secure memslot is dropped, all the pages backed in the secure
device (aka really backed by secure memory by the Ultravisor)
should be paged out to a normal page. Previously, this was
achieved by triggering the page fault mechanism which is calling
kvmppc_svm_page_out() on each pages.
This can't work when hot unplugging a memory slot because the memory
slot is flagged as invalid and gfn_to_pfn() is then not trying to access
the page, so the page fault mechanism is not triggered.
Since the final goal is to make a call to kvmppc_svm_page_out() it seems
simpler to call directly instead of triggering such a mechanism. This
way kvmppc_uvmem_drop_pages() can be called even when hot unplugging a
memslot.
Since kvmppc_uvmem_drop_pages() is already holding kvm->arch.uvmem_lock,
the call to __kvmppc_svm_page_out() is made. As
__kvmppc_svm_page_out needs the vma pointer to migrate the pages,
the VMA is fetched in a lazy way, to not trigger find_vma() all
the time. In addition, the mmap_sem is held in read mode during
that time, not in write mode since the virual memory layout is not
impacted, and kvm->arch.uvmem_lock prevents concurrent operation
on the secure device.
Reviewed-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
[modified check on the VMA in kvmppc_uvmem_drop_pages]
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
[modified the changelog description]
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
kvmppc_svm_page_out() will need to be called by kvmppc_uvmem_drop_pages()
so move it up earlier in this file.
Furthermore it will be interesting to call this function when already
holding the kvm->arch.uvmem_lock, so prefix the original function with __
and remove the locking in it, and introduce a wrapper which call that
function with the lock held.
There is no functional change.
Reviewed-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
When a memory slot is hot plugged to a SVM, PFNs associated with the
GFNs in that slot must be migrated to the secure-PFNs, aka device-PFNs.
Call kvmppc_uv_migrate_mem_slot() to accomplish this.
Disable page-merge for all pages in the memory slot.
Reviewed-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
[rearranged the code, and modified the commit log]
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The Ultravisor is expected to explicitly call H_SVM_PAGE_IN for all the
pages of the SVM before calling H_SVM_INIT_DONE. This causes a huge
delay in tranistioning the VM to SVM. The Ultravisor is only interested
in the pages that contain the kernel, initrd and other important data
structures. The rest contain throw-away content.
However if not all pages are requested by the Ultravisor, the Hypervisor
continues to consider the GFNs corresponding to the non-requested pages
as normal GFNs. This can lead to data-corruption and undefined behavior.
In H_SVM_INIT_DONE handler, move all the PFNs associated with the SVM's
GFNs to secure-PFNs. Skip the GFNs that are already Paged-in or Shared
or Paged-in followed by a Paged-out.
Reviewed-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
During the life of SVM, its GFNs transition through normal, secure and
shared states. Since the kernel does not track GFNs that are shared, it
is not possible to disambiguate a shared GFN from a GFN whose PFN has
not yet been migrated to a secure-PFN. Also it is not possible to
disambiguate a secure-GFN from a GFN whose GFN has been pagedout from
the ultravisor.
The ability to identify the state of a GFN is needed to skip migration
of its PFN to secure-PFN during ESM transition.
The code is re-organized to track the states of a GFN as explained
below.
************************************************************************
1. States of a GFN
---------------
The GFN can be in one of the following states.
(a) Secure - The GFN is secure. The GFN is associated with
a Secure VM, the contents of the GFN is not accessible
to the Hypervisor. This GFN can be backed by a secure-PFN,
or can be backed by a normal-PFN with contents encrypted.
The former is true when the GFN is paged-in into the
ultravisor. The latter is true when the GFN is paged-out
of the ultravisor.
(b) Shared - The GFN is shared. The GFN is associated with a
a secure VM. The contents of the GFN is accessible to
Hypervisor. This GFN is backed by a normal-PFN and its
content is un-encrypted.
(c) Normal - The GFN is a normal. The GFN is associated with
a normal VM. The contents of the GFN is accesible to
the Hypervisor. Its content is never encrypted.
2. States of a VM.
---------------
(a) Normal VM: A VM whose contents are always accessible to
the hypervisor. All its GFNs are normal-GFNs.
(b) Secure VM: A VM whose contents are not accessible to the
hypervisor without the VM's consent. Its GFNs are
either Shared-GFN or Secure-GFNs.
(c) Transient VM: A Normal VM that is transitioning to secure VM.
The transition starts on successful return of
H_SVM_INIT_START, and ends on successful return
of H_SVM_INIT_DONE. This transient VM, can have GFNs
in any of the three states; i.e Secure-GFN, Shared-GFN,
and Normal-GFN. The VM never executes in this state
in supervisor-mode.
3. Memory slot State.
------------------
The state of a memory slot mirrors the state of the
VM the memory slot is associated with.
4. VM State transition.
--------------------
A VM always starts in Normal Mode.
H_SVM_INIT_START moves the VM into transient state. During this
time the Ultravisor may request some of its GFNs to be shared or
secured. So its GFNs can be in one of the three GFN states.
H_SVM_INIT_DONE moves the VM entirely from transient state to
secure-state. At this point any left-over normal-GFNs are
transitioned to Secure-GFN.
H_SVM_INIT_ABORT moves the transient VM back to normal VM.
All its GFNs are moved to Normal-GFNs.
UV_TERMINATE transitions the secure-VM back to normal-VM. All
the secure-GFN and shared-GFNs are tranistioned to normal-GFN
Note: The contents of the normal-GFN is undefined at this point.
5. GFN state implementation:
-------------------------
Secure GFN is associated with a secure-PFN; also called uvmem_pfn,
when the GFN is paged-in. Its pfn[] has KVMPPC_GFN_UVMEM_PFN flag
set, and contains the value of the secure-PFN.
It is associated with a normal-PFN; also called mem_pfn, when
the GFN is pagedout. Its pfn[] has KVMPPC_GFN_MEM_PFN flag set.
The value of the normal-PFN is not tracked.
Shared GFN is associated with a normal-PFN. Its pfn[] has
KVMPPC_UVMEM_SHARED_PFN flag set. The value of the normal-PFN
is not tracked.
Normal GFN is associated with normal-PFN. Its pfn[] has
no flag set. The value of the normal-PFN is not tracked.
6. Life cycle of a GFN
--------------------
--------------------------------------------------------------
| | Share | Unshare | SVM |H_SVM_INIT_DONE|
| |operation |operation | abort/ | |
| | | | terminate | |
-------------------------------------------------------------
| | | | | |
| Secure | Shared | Secure |Normal |Secure |
| | | | | |
| Shared | Shared | Secure |Normal |Shared |
| | | | | |
| Normal | Shared | Secure |Normal |Secure |
--------------------------------------------------------------
7. Life cycle of a VM
--------------------
--------------------------------------------------------------------
| | start | H_SVM_ |H_SVM_ |H_SVM_ |UV_SVM_ |
| | VM |INIT_START|INIT_DONE|INIT_ABORT |TERMINATE |
| | | | | | |
--------- ----------------------------------------------------------
| | | | | | |
| Normal | Normal | Transient|Error |Error |Normal |
| | | | | | |
| Secure | Error | Error |Error |Error |Normal |
| | | | | | |
|Transient| N/A | Error |Secure |Normal |Normal |
--------------------------------------------------------------------
************************************************************************
Reviewed-by: Bharata B Rao <bharata@linux.ibm.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Page-merging of pages in memory-slots associated with a Secure VM
is disabled in H_SVM_PAGE_IN handler.
This operation should have been done the much earlier; the moment the VM
is initiated for secure-transition. Delaying this operation increases
the probability for those pages to acquire new references, making it
impossible to migrate those pages in H_SVM_PAGE_IN handler.
Disable page-migration in H_SVM_INIT_START handling.
Reviewed-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Without this fix, git is confused. It generates wrong
function context for code changes in subsequent patches.
Weird, but true.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Note: compat variant of REGSET_TM_CGPR is almost certainly wrong;
it claims to be 48*64bit, but just as compat REGSET_GPR it stores
44*32bit of (truncated) registers + 4 32bit zeros... followed by
48 more 32bit zeroes. Might be too late to change - it's a userland
ABI, after all ;-/
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
all uses are conditional upon ELF_CORE_COPY_XFPREGS, which has not
been defined on any architecture since 2010
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
skiroot_defconfig fails:
arch/powerpc/kernel/fadump.c:48:17: error: ‘cpus_in_fadump’ defined but not used
48 | static atomic_t cpus_in_fadump;
Fix it by moving the definition into the #ifdef where it's used.
Fixes: ba608c4fa1 ("powerpc/fadump: fix race between pstore write and fadump crash trigger")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200727070341.595634-1-mpe@ellerman.id.au
Commit 2f92447f9f ("powerpc/book3s64/hash: Use the pte_t address from the
caller") removed the local_irq_disable from hash_preload, but it was
required for more than just the page table walk: the hash pte busy bit is
effectively a lock which may be taken in interrupt context, and the local
update flag test must not be preempted before it's used.
This solves apparent lockups with perf interrupting __hash_page_64K. If
get_perf_callchain then also takes a hash fault on the same page while it
is already locked, it will loop forever taking hash faults, which looks like
this:
cpu 0x49e: Vector: 100 (System Reset) at [c00000001a4f7d70]
pc: c000000000072dc8: hash_page_mm+0x8/0x800
lr: c00000000000c5a4: do_hash_page+0x24/0x38
sp: c0002ac1cc69ac70
msr: 8000000000081033
current = 0xc0002ac1cc602e00
paca = 0xc00000001de1f280 irqmask: 0x03 irq_happened: 0x01
pid = 20118, comm = pread2_processe
Linux version 5.8.0-rc6-00345-g1fad14f18bc6
49e:mon> t
[c0002ac1cc69ac70] c00000000000c5a4 do_hash_page+0x24/0x38 (unreliable)
--- Exception: 300 (Data Access) at c00000000008fa60 __copy_tofrom_user_power7+0x20c/0x7ac
[link register ] c000000000335d10 copy_from_user_nofault+0xf0/0x150
[c0002ac1cc69af70] c00032bf9fa3c880 (unreliable)
[c0002ac1cc69afa0] c000000000109df0 read_user_stack_64+0x70/0xf0
[c0002ac1cc69afd0] c000000000109fcc perf_callchain_user_64+0x15c/0x410
[c0002ac1cc69b060] c000000000109c00 perf_callchain_user+0x20/0x40
[c0002ac1cc69b080] c00000000031c6cc get_perf_callchain+0x25c/0x360
[c0002ac1cc69b120] c000000000316b50 perf_callchain+0x70/0xa0
[c0002ac1cc69b140] c000000000316ddc perf_prepare_sample+0x25c/0x790
[c0002ac1cc69b1a0] c000000000317350 perf_event_output_forward+0x40/0xb0
[c0002ac1cc69b220] c000000000306138 __perf_event_overflow+0x88/0x1a0
[c0002ac1cc69b270] c00000000010cf70 record_and_restart+0x230/0x750
[c0002ac1cc69b620] c00000000010d69c perf_event_interrupt+0x20c/0x510
[c0002ac1cc69b730] c000000000027d9c performance_monitor_exception+0x4c/0x60
[c0002ac1cc69b750] c00000000000b2f8 performance_monitor_common_virt+0x1b8/0x1c0
--- Exception: f00 (Performance Monitor) at c0000000000cb5b0 pSeries_lpar_hpte_insert+0x0/0x160
[link register ] c0000000000846f0 __hash_page_64K+0x210/0x540
[c0002ac1cc69ba50] 0000000000000000 (unreliable)
[c0002ac1cc69bb00] c000000000073ae0 update_mmu_cache+0x390/0x3a0
[c0002ac1cc69bb70] c00000000037f024 wp_page_copy+0x364/0xce0
[c0002ac1cc69bc20] c00000000038272c do_wp_page+0xdc/0xa60
[c0002ac1cc69bc70] c0000000003857bc handle_mm_fault+0xb9c/0x1b60
[c0002ac1cc69bd50] c00000000006c434 __do_page_fault+0x314/0xc90
[c0002ac1cc69be20] c00000000000c5c8 handle_page_fault+0x10/0x2c
--- Exception: 300 (Data Access) at 00007fff8c861fe8
SP (7ffff6b19660) is in userspace
Fixes: 2f92447f9f ("powerpc/book3s64/hash: Use the pte_t address from the caller")
Reported-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reported-by: Anton Blanchard <anton@ozlabs.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200727060947.10060-1-npiggin@gmail.com
In note_page(), the pg_state is updated the same way in two places.
Add note_page_update_state() to do it.
Also include the display of boundary markers there as it is missing
"no level" leg, leading to a mismatch when the first two markers
are at the same address and the first displayed area uses that
address.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a284a809f01c705bbaab303b06fda216f147a99a.1593429426.git.christophe.leroy@csgroup.eu
When STRICT_KERNEL_RWX is set, we want to set NX bit on vmalloc
segments. But modules require exec.
Use a dedicated segment for modules. There is not much space
above kernel, and we don't waste vmalloc space to do alignment.
Therefore, we take the segment before PAGE_OFFSET for modules.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/eb8faba9148b6cf17c696ba776b4e8ee2f6313bf.1593428200.git.christophe.leroy@csgroup.eu
User space stops at TASK_SIZE. At the moment, kernel space starts
at PAGE_OFFSET.
In order to use space between TASK_SIZE and PAGE_OFFSET for modules,
make TASK_SIZE the limit between user and kernel space.
Note that fault.c already considers TASK_SIZE as the boundary between
user and kernel space.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b38b52cd8dabbb56fbd6f9219d6f3cdccbb43b44.1593428200.git.christophe.leroy@csgroup.eu
In order to allow allocation of modules outside of vmalloc space,
use MODULES_VADDR and MODULES_END when MODULES_VADDR is defined.
Redefine module_alloc() when MODULES_VADDR defined.
Unmap corresponding KASAN shadow memory.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7ecf5fff1eef67d450e73fc412b6ec3818483d75.1593428200.git.christophe.leroy@csgroup.eu
The sparse tool complains as follows:
arch/powerpc/platforms/pseries/papr_scm.c:97:1: warning:
symbol 'papr_nd_regions' was not declared. Should it be static?
arch/powerpc/platforms/pseries/papr_scm.c:98:1: warning:
symbol 'papr_ndr_lock' was not declared. Should it be static?
Those variables are not used outside of papr_scm.c, so this
commit marks them static.
Fixes: 85343a8da2 ("powerpc/papr/scm: Add bad memory ranges to nvdimm bad ranges")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200725091949.75234-1-weiyongjun1@huawei.com
Clang's objdump emits slightly different output from GNU's objdump,
causing a list of warnings to be emitted during relocatable builds.
E.g., clang's objdump emits this:
c000000000000004: 2c 00 00 48 b 0xc000000000000030
...
c000000000005c6c: 10 00 82 40 bf 2, 0xc000000000005c7c
while GNU objdump emits:
c000000000000004: 2c 00 00 48 b c000000000000030 <__start+0x30>
...
c000000000005c6c: 10 00 82 40 bne c000000000005c7c <masked_interrupt+0x3c>
Adjust llvm-objdump's output to remove the extraneous '0x' and convert
'bf' and 'bt' to 'bne' and 'beq' resp. to more closely match GNU
objdump's output.
Note that clang's objdump doesn't yet output the relocation symbols on
PPC.
Signed-off-by: Bill Wendling <morbo@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/191c67db31264b69cf6b566fd69851beb3dd0abb.1595630874.git.morbo@google.com
This implements smp_cond_load_relaxed() with the slowpath busy loop
using the preferred SMT priority pattern.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Waiman Long <longman@redhat.com>
[mpe: Make it 64-bit only to fix build errors on 32-bit]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724131423.1362108-7-npiggin@gmail.com
This brings the behaviour of the uncontended fast path back to roughly
equivalent to simple spinlocks -- a single atomic op with lock hint.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724131423.1362108-6-npiggin@gmail.com
This implements the generic paravirt qspinlocks using H_PROD and
H_CONFER to kick and wait.
This uses an un-directed yield to any CPU rather than the directed
yield to a pre-empted lock holder that paravirtualised simple
spinlocks use, that requires no kick hcall. This is something that
could be investigated and improved in future.
Performance results can be found in the commit which added queued
spinlocks.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724131423.1362108-5-npiggin@gmail.com
These have shown significantly improved performance and fairness when
spinlock contention is moderate to high on very large systems.
With this series including subsequent patches, on a 16 socket 1536
thread POWER9, a stress test such as same-file open/close from all
CPUs gets big speedups, 11620op/s aggregate with simple spinlocks vs
384158op/s (33x faster), where the difference in throughput between
the fastest and slowest thread goes from 7x to 1.4x.
Thanks to the fast path being identical in terms of atomics and
barriers (after a subsequent optimisation patch), single threaded
performance is not changed (no measurable difference).
On smaller systems, performance and fairness seems to be generally
improved. Using dbench on tmpfs as a test (that starts to run into
kernel spinlock contention), a 2-socket OpenPOWER POWER9 system was
tested with bare metal and KVM guest configurations. Results can be
found here:
https://github.com/linuxppc/issues/issues/305#issuecomment-663487453
Observations are:
- Queued spinlocks are equal when contention is insignificant, as
expected and as measured with microbenchmarks.
- When there is contention, on bare metal queued spinlocks have better
throughput and max latency at all points.
- When virtualised, queued spinlocks are slightly worse approaching
peak throughput, but significantly better throughput and max latency
at all points beyond peak, until queued spinlock maximum latency
rises when clients are 2x vCPUs.
The regressions haven't been analysed very well yet, there are a lot
of things that can be tuned, particularly the paravirtualised locking,
but the numbers already look like a good net win even on relatively
small systems.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724131423.1362108-4-npiggin@gmail.com
To prepare for queued spinlocks. This is a simple rename except to
update preprocessor guard name and a file reference.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724131423.1362108-3-npiggin@gmail.com
These functions will be used by the queued spinlock implementation,
and may be useful elsewhere too, so move them out of spinlock.h.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724131423.1362108-2-npiggin@gmail.com
MAX_NUMNODES is a theoretical maximum number of nodes thats is
supported by the kernel. Device tree properties exposes the number of
possible nodes on the current platform. The kernel would detected this
and would use it for most of its resource allocations. If the platform
now increases the nodes to over what was already exposed, then it may
lead to inconsistencies. Hence limit it to the already exposed nodes.
Suggested-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724105809.24733-1-srikar@linux.vnet.ibm.com
Initialize Monitor Mode Control Register 3 (MMCR3)
SPR which is new in power10. For PowerISA v3.1, BHRB disable
is controlled via Monitor Mode Control Register A (MMCRA) bit,
namely "BHRB Recording Disable (BHRBRD)". This patch also initializes
MMCRA BHRBRD to disable BHRB feature at boot for power10.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1595489557-2047-1-git-send-email-atrajeev@linux.vnet.ibm.com
Previously iov->vfs_expanded was used for two purposes.
1) To work out how much we need to multiple the per-VF BAR size to figure
out the total space required for the IOV BAR.
2) To indicate that IOV is not usable with this device (vfs_expanded == 0).
We don't really need the field for either since the multiple in 1) is
always the number PEs supported by the PHB. Similarly, we don't really need
it in 2) either since the IOV data field will be NULL if we can't use IOV
with the device.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722065715.1432738-16-oohall@gmail.com
Using single PE BARs to map an SR-IOV BAR is really a choice about what
strategy to use when mapping a BAR. It doesn't make much sense for this to
be a global setting since a device might have one large BAR which needs to
be mapped with single PE windows and another smaller BAR that can be mapped
with a regular segmented window. Make the segmented vs single decision a
per-BAR setting and clean up the logic that decides which mode to use.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722065715.1432738-15-oohall@gmail.com
Split up the logic so that we have one branch that handles setting up a
segmented window and another that handles setting up single PE windows for
each VF.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722065715.1432738-14-oohall@gmail.com
I want to refactor the loop this code is currently inside of. Hoist it on
out.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722065715.1432738-13-oohall@gmail.com
Remove the IODA2 PHB checks. We already assume IODA2 in several places so
there's not much point in wrapping most of the setup and teardown process
in an if block.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722065715.1432738-12-oohall@gmail.com
Currently the iov->pe_num_map[] does one of two things depending on
whether single PE mode is being used or not. When it is, this contains an
array which maps a vf_index to the corresponding PE number. When single PE
mode is not being used this contains a scalar which is the base PE for the
set of enabled VFs (for for VFn is base + n).
The array was necessary because when calling pnv_ioda_alloc_pe() there is
no guarantee that the allocated PEs would be contigious. We can now
allocate contigious blocks of PEs so this is no longer an issue. This
allows us to drop the if (single_mode) {} .. else {} block scattered
through the SR-IOV code which is a nice clean up.
This also fixes a bug in pnv_pci_sriov_disable() which is the non-atomic
bitmap_clear() to manipulate the PE allocation map. Other users of the map
assume it will be accessed with atomic ops.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722065715.1432738-11-oohall@gmail.com
Rework the PE allocation logic to allow allocating blocks of PEs rather
than individually. We'll use this to allocate contigious blocks of PEs for
the SR-IOVs.
This patch also adds code to pnv_ioda_alloc_pe() and pnv_ioda_reserve_pe() to
use the existing, but unused, phb->pe_alloc_mutex. Currently these functions
use atomic bit ops to release a currently allocated PE number. However,
the pnv_ioda_alloc_pe() wants to have exclusive access to the bit map while
scanning for hole large enough to accomodate the allocation size.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722065715.1432738-10-oohall@gmail.com
The sequence required to use the single PE BAR mode is kinda janky and
requires a little explanation. The API was designed with P7-IOC style
windows where the setup process is something like:
1. Configure the window start / end address
2. Enable the window
3. Map the segments of each window to the PE
For Single PE BARs the process is:
1. Set the PE for segment zero on a disabled window
2. Set the range
3. Enable the window
Move the OPAL calls into their own helper functions where the quirks can be
contained.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722065715.1432738-9-oohall@gmail.com
No need for the multi-dimensional arrays, just use a bitmap.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722065715.1432738-8-oohall@gmail.com
This prevents SR-IOV being used by making the SR-IOV BAR resources
unallocatable. Rename it to reflect what it actually does.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722065715.1432738-7-oohall@gmail.com
SR-IOV support on PowerNV is a byzantine maze of hooks. I have no idea
how anyone is supposed to know how it works except through a lot of
stuffering. Write up some docs about the overall story to help out
the next sucker^Wperson who needs to tinker with it.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722065715.1432738-6-oohall@gmail.com
pci-ioda.c is getting a bit unwieldly due to the amount of stuff jammed in
there. The SR-IOV support can be extracted easily enough and is mostly
standalone, so move it into a separate file.
This patch also moves the PowerNV SR-IOV specific fields from pci_dn and
moves them into a platform specific structure. I'm not sure how they ended
up in there in the first place, but leaking platform specifics into common
code has proven to be a terrible idea so far so lets stop doing that.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722065715.1432738-5-oohall@gmail.com
We pre-configure the m64 window for IODA1 as a 1-1 segment-PE mapping,
similar to PHB3. Currently the actual mapping of segments occurs in
pnv_ioda_pick_m64_pe(), but we can move it into pnv_ioda1_init_m64() and
drop the IODA1 specific code paths in the PE setup / teardown.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722065715.1432738-4-oohall@gmail.com
There's an optimisation in the PE setup which skips performing DMA
setup for a PE if we only have bridges in a PE. The assumption being
that only "real" devices will DMA to system memory, which is probably
fair. However, if we start off with only bridge devices in a PE then
add a non-bridge device the new device won't be able to use DMA because
we never configured it.
Fix this (admittedly pretty weird) edge case by tracking whether we've done
the DMA setup for the PE or not. If a non-bridge device is added to the PE
(via rescan or hotplug, or whatever) we can set up DMA on demand.
This also means the only remaining user of the old "DMA Weight" code is
the IODA1 DMA setup code that it was originally added for, which is good.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722065715.1432738-3-oohall@gmail.com
Currently we have these two functions:
pnv_pci_ioda2_release_dma_pe(), and
pnv_pci_ioda2_release_pe_dma()
The first is used when tearing down VF PEs and the other is used for normal
devices. There's very little difference between the two though. The latter
(non-VF) will skip a call to pnv_pci_ioda2_unset_window() unless
CONFIG_IOMMU_API=y is set. There's no real point in doing this so fold the
two together.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722065715.1432738-2-oohall@gmail.com
Add a helper to go from a pci_bus structure to the pnv_phb that hosts
that bus. There's a lot of instances of the following pattern:
struct pci_controller *hose = pci_bus_to_host(pdev->bus);
struct pnv_phb *phb = hose->private_data;
Without any other uses of the pci_controller inside the function. This
is hard to read since it requires you to memorise the contents of the
private data fields and kind of error prone since it involves blindly
assigning a void pointer. Add a helper to make it more concise and
explicit.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722065715.1432738-1-oohall@gmail.com
The EEH core has a concept of a "PE tree" to support PowerNV. The PE tree
follows the PCI bus structures because a reset asserted on an upstream
bridge will be propagated to the downstream bridges. On pseries there's a
1-1 correspondence between what the guest sees are a PHB and a PE so the
"tree" is really just a single node.
Current the EEH core is reponsible for setting up this PE tree which it
does by traversing the pci_dn tree. The structure of the pci_dn tree
matches the bus tree on PowerNV which leads to the PE tree being "correct"
this setup method doesn't make a whole lot of sense and it's actively
confusing for the pseries case where it doesn't really do anything.
We want to remove the dependence on pci_dn anyway so this patch move
choosing where to insert a new PE into the platform code rather than
being part of the generic EEH code. For PowerNV this simplifies the
tree building logic and removes the use of pci_dn. For pseries we
keep the existing logic. I'm not really convinced it does anything
due to the 1-1 PE-to-PHB correspondence so every device under that
PHB should be in the same PE, but I'd rather not remove it entirely
until we've had a chance to look at it more deeply.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200725081231.39076-14-oohall@gmail.com
This is mostly just to make the subsequent diffs less noisy. No functional
changes.
One thing that needs calling out is the removal of the "config_addr"
variable and replacing it with edev->bdfn. The contents of edev->bdfn are
the same, however it's worth pointing out that what RTAS calls a
"config_addr" isn't the same as the bdfn. The config_addr is supposed to
be: <bus><devfn><reg> with each field being an 8 bit number. Various parts
of the EEH code use BDFN and "config_addr" as interchangeable quantities
even though they aren't really.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200725081231.39076-13-oohall@gmail.com
The naming of eeh_{add_to|remove_from}_parent_pe() doesn't really reflect
what they actually do. If the PE referred to be edev->pe_config_addr
already exists under that PHB then the edev is added to that PE. However,
if the PE doesn't exist the a new one is created for the edev.
The bulk of the implementation of eeh_add_to_parent_pe() covers that
second case. Similarly, most of eeh_remove_from_parent_pe() is
determining when it's safe to delete a PE.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200725081231.39076-12-oohall@gmail.com
The edev->class_code field is never referenced anywhere except for the
platform specific probe functions. The same information is available in
the pci_dev for PowerNV and in the pci_dn on pseries so we can remove
the field.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200725081231.39076-11-oohall@gmail.com
Mechanical conversion of the eeh_ops interfaces to use eeh_dev to reference
a specific device rather than pci_dn. No functional changes.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200725081231.39076-9-oohall@gmail.com
Mechanical conversion of the eeh_ops interfaces to use eeh_dev to reference
a specific device rather than pci_dn. No functional changes.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200725081231.39076-8-oohall@gmail.com
Mechanical conversion of the eeh_ops interfaces to use eeh_dev to reference
a specific device rather than pci_dn. No functional changes.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200725081231.39076-7-oohall@gmail.com
There's a bunch of strange things about this code. First up is that none of
the fields being written to are functional for a VF. The SR-IOV
specification lists then as "Reserved, but OS should preserve" so writing
new values to them doesn't do anything and is clearly wrong from a
correctness perspective.
However, since VFs are designed to be managed by the OS there is an
argument to be made that we should be saving and restoring some parts of
config space. We already sort of do that by saving the first 64 bytes of
config space in the eeh_dev (see eeh_dev->config_space[]). This is
inadequate since it doesn't even consider saving and restoring the PCI
capability structures. However, this is a problem with EEH in general and
that needs to be fixed for non-VF devices too.
There's no real reason to keep around this around so delete it.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200725081231.39076-6-oohall@gmail.com
This is used in precisely one place which is in pseries specific platform
code. There's no need to have the callback in eeh_ops since the platform
chooses the EEH PE addresses anyway. The PowerNV implementation has always
been a stub too so remove it.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200725081231.39076-5-oohall@gmail.com
The pci_dn->pe_number field is mainly used to track the IODA PE number of a
device on PowerNV. At some point it grew a user in the pseries SR-IOV
support which muddies the waters a bit, so remove it.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200725081231.39076-4-oohall@gmail.com
Drivers that do not support the PCI error handling callbacks are handled by
tearing down the device and re-probing them. If the device being removed is
a virtual function then we need to know the VF index so it can be removed
using the pci_iov_{add|remove}_virtfn() API.
Currently this is handled by looking up the pci_dn, and using the vf_index
that was stashed there when the pci_dn for the VF was created in
pcibios_sriov_enable(). We would like to eliminate the use of pci_dn
outside of pseries though so we need to provide the generic EEH code with
some other way to find the vf_index.
The easiest thing to do here is move the vf_index field out of pci_dn and
into eeh_dev. Currently pci_dn and eeh_dev are allocated and initialized
together so this is a fairly minimal change in preparation for splitting
pci_dn and eeh_dev in the future.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200725081231.39076-3-oohall@gmail.com
The only thing in this file is eeh_dev_init() which is allocates and
initialises an eeh_dev based on a pci_dn. This is only ever called from
pci_dn.c so move it into there and remove the file.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200725081231.39076-2-oohall@gmail.com
This function is a one line wrapper around eeh_phb_pe_create() and despite
the name it doesn't create any eeh_dev structures. Replace it with direct
calls to eeh_phb_pe_create() since that does what it says on the tin
and removes a layer of indirection.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200725081231.39076-1-oohall@gmail.com
Power10 has removed 512 bytes boundary from match criteria i.e. the watch
range can cross 512 bytes boundary.
Note: ISA 3.1 Book III 9.4 match criteria includes 512 byte limit but that
is a documentation mistake and hopefully will be fixed in the next version
of ISA. Though, ISA 3.1 change log mentions about removal of 512B boundary:
Multiple DEAW:
Added a second Data Address Watchpoint. [H]DAR is
set to the first byte of overlap. 512B boundary is
removed.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200723090813.303838-11-ravi.bangoria@linux.ibm.com
So far Book3S Powerpc supported only one watchpoint. Power10 is
introducing 2nd DAWR. Enable 2nd DAWR support for Power10.
Availability of 2nd DAWR will depend on CPU_FTR_DAWR1.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200723090813.303838-10-ravi.bangoria@linux.ibm.com
2nd DAWR can be set/unset using H_SET_MODE hcall with resource value 5.
Enable powervm guest support with that. This has no effect on kvm guest
because kvm will return error if guest does hcall with resource value 5.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200723090813.303838-9-ravi.bangoria@linux.ibm.com
Current H_SET_MODE hcall macro name for setting/resetting DAWR0 is
H_SET_MODE_RESOURCE_SET_DAWR. Add suffix 0 to macro name as well.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Reviewed-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200723090813.303838-8-ravi.bangoria@linux.ibm.com
As per the PAPR, bit 0 of byte 64 in pa-features property indicates
availability of 2nd DAWR registers. i.e. If this bit is set, 2nd
DAWR is present, otherwise not. Host generally uses "cpu-features",
which masks "pa-features". But "cpu-features" are still not used for
guests and thus this change is mostly applicable for guests only.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200723090813.303838-7-ravi.bangoria@linux.ibm.com
CPU_FTR_DAWR is by default enabled for host via CPU_FTRS_DT_CPU_BASE
(controlled by CONFIG_PPC_DT_CPU_FTRS). But cpu-features device-tree
node is not PAPR compatible and thus not yet used by kvm or pHyp
guests. Enable watchpoint functionality on power10 guest (both kvm
and powervm) by adding CPU_FTR_DAWR to CPU_FTRS_POWER10. Note that
this change does not enable 2nd DAWR support.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200723090813.303838-5-ravi.bangoria@linux.ibm.com
'ea' returned by analyse_instr() needs to be aligned down to cache
block size for CACHEOP instructions. analyse_instr() does not set
size for CACHEOP, thus size also needs to be calculated manually.
Fixes: 27985b2a64 ("powerpc/watchpoint: Don't ignore extraneous exceptions blindly")
Fixes: 74c6881019 ("powerpc/watchpoint: Prepare handler to handle more than one watchpoint")
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200723090813.303838-4-ravi.bangoria@linux.ibm.com
Pedro Miraglia Franco de Carvalho noticed that on p8/p9, DAR value is
inconsistent with different type of load/store. Like for byte,word
etc. load/stores, DAR is set to the address of the first byte of
overlap between watch range and real access. But for quadword load/
store it's sometime set to the address of the first byte of real
access whereas sometime set to the address of the first byte of
overlap. This issue has been fixed in p10. In p10(ISA 3.1), DAR is
always set to the address of the first byte of overlap. Commit 27985b2a64
("powerpc/watchpoint: Don't ignore extraneous exceptions blindly")
wrongly assumes that DAR is set to the address of the first byte of
overlap for all load/stores on p8/p9 as well. Fix that. With the fix,
we now rely on 'ea' provided by analyse_instr(). If analyse_instr()
fails, generate event unconditionally on p8/p9, and on p10 generate
event only if DAR is within a DAWR range.
Note: 8xx is not affected.
Fixes: 27985b2a64 ("powerpc/watchpoint: Don't ignore extraneous exceptions blindly")
Fixes: 74c6881019 ("powerpc/watchpoint: Prepare handler to handle more than one watchpoint")
Reported-by: Pedro Miraglia Franco de Carvalho <pedromfc@br.ibm.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200723090813.303838-3-ravi.bangoria@linux.ibm.com
Milton Miller reported that we are aligning start and end address to
wrong size SZ_512M. It should be SZ_512. Fix that.
While doing this change I also found a case where ALIGN() comparison
fails. Within a given aligned range, ALIGN() of two addresses does not
match when start address is pointing to the first byte and end address
is pointing to any other byte except the first one. But that's not true
for ALIGN_DOWN(). ALIGN_DOWN() of any two addresses within that range
will always point to the first byte. So use ALIGN_DOWN() instead of
ALIGN().
Fixes: e68ef121c1 ("powerpc/watchpoint: Use builtin ALIGN*() macros")
Reported-by: Milton Miller <miltonm@us.ibm.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200723090813.303838-2-ravi.bangoria@linux.ibm.com
POWER6 only supports AMR update via privileged mode (MSR[PR] = 0,
SPRN_AMR=29) The PR=1 (userspace) alias for that SPR (SPRN_AMR=13) was
only supported from POWER7. Since we don't allow userspace modifying
of AMR value we should disable pkey support on P6 and before.
The hypervisor will still report pkey support via
"ibm,processor-storage-keys". Hence also check for P7 CPU_FTR bit to
decide on pkey support.
Fixes: f491fe3fb4 ("powerpc/book3s64/pkeys: Simplify the key initialization")
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200726132517.399076-1-aneesh.kumar@linux.ibm.com
The UDP reuseport conflict was a little bit tricky.
The net-next code, via bpf-next, extracted the reuseport handling
into a helper so that the BPF sk lookup code could invoke it.
At the same time, the logic for reuseport handling of unconnected
sockets changed via commit efc6b6f6c3
which changed the logic to carry on the reuseport result into the
rest of the lookup loop if we do not return immediately.
This requires moving the reuseport_has_conns() logic into the callers.
While we are here, get rid of inline directives as they do not belong
in foo.c files.
The other changes were cases of more straightforward overlapping
modifications.
Signed-off-by: David S. Miller <davem@davemloft.net>
When I "fixed" the ppc64e build in Nick's recent patch, I typoed the
CONFIG symbol, resulting in one that doesn't exist. Fix it to use the
correct symbol.
Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Fixes: 7fa95f9ada ("powerpc/64s: system call support for scv/rfscv instructions")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724131609.1640533-1-mpe@ellerman.id.au
ppc64_book3e_allmodconfig fails with:
arch/powerpc/lib/test_emulate_step.c: In function 'test_pld':
arch/powerpc/lib/test_emulate_step.c:113:7: error: implicit declaration of function 'cpu_has_feature'
113 | if (!cpu_has_feature(CPU_FTR_ARCH_31)) {
| ^~~~~~~~~~~~~~~
Add an include of cpu_has_feature.h to fix it.
Fixes: b6b54b4272 ("powerpc/sstep: Add tests for prefixed integer load/stores")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724004109.1461709-1-mpe@ellerman.id.au
From Nick's cover letter:
Linux powerpc new system call instruction and ABI
System Call Vectored (scv) ABI
==============================
The scv instruction is introduced with POWER9 / ISA3, it comes with an
rfscv counter-part. The benefit of these instructions is
performance (trading slower SRR0/1 with faster LR/CTR registers, and
entering the kernel with MSR[EE] and MSR[RI] left enabled, which can
reduce MSR updates. The scv instruction has 128 levels (not enough to
cover the Linux system call space).
Assignment and advertisement
----------------------------
The proposal is to assign scv levels conservatively, and advertise
them with HWCAP feature bits as we add support for more.
Linux has not enabled FSCR[SCV] yet, so executing the scv instruction
will cause the kernel to log a "SCV facility unavilable" message, and
deliver a SIGILL with ILL_ILLOPC to the process. Linux has defined a
HWCAP2 bit PPC_FEATURE2_SCV for SCV support, but does not set it.
This change allocates the zero level ('scv 0'), advertised with
PPC_FEATURE2_SCV, which will be used to provide normal Linux system
calls (equivalent to 'sc').
Attempting to execute scv with other levels will cause a SIGILL to be
delivered the same as before, but will not log a "SCV facility
unavailable" message (because the processor facility is enabled).
Calling convention
------------------
The proposal is for scv 0 to provide the standard Linux system call
ABI with the following differences from sc convention[1]:
- LR is to be volatile across scv calls. This is necessary because the
scv instruction clobbers LR. From previous discussion, this should
be possible to deal with in GCC clobbers and CFI.
- cr1 and cr5-cr7 are volatile. This matches the C ABI and would allow
the kernel system call exit to avoid restoring the volatile cr
registers (although we probably still would anyway to avoid
information leaks).
- Error handling: The consensus among kernel, glibc, and musl is to
move to using negative return values in r3 rather than CR0[SO]=1 to
indicate error, which matches most other architectures, and is
closer to a function call.
Notes
-----
- r0,r4-r8 are documented as volatile in the ABI, but the kernel patch
as submitted currently preserves them. This is to leave room for
deciding which way to go with these. Some small benefit was found by
preserving them[1] but I'm not convinced it's worth deviating from
the C function call ABI just for this. Release code should follow
the ABI.
Previous discussions:
https://lists.ozlabs.org/pipermail/linuxppc-dev/2020-April/208691.htmlhttps://lists.ozlabs.org/pipermail/linuxppc-dev/2020-April/209268.html
[1] https://github.com/torvalds/linux/blob/master/Documentation/powerpc/syscall64-abi.rst
[2] https://lists.ozlabs.org/pipermail/linuxppc-dev/2020-April/209263.html
POWER9 onwards the support for the registers HID1, HID4, HID5 has been
receded.
Although mfspr on the above registers worked in Power9, In Power10
simulator is unrecognized. Moving their assignment under the
check for machines lower than Power9
Signed-off-by: Pratik Rajesh Sampat <psampat@linux.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200721153708.89057-4-psampat@linux.ibm.com
Replace the variable name from using "pnv_first_spr_loss_level" to
"deep_spr_loss_state".
pnv_first_spr_loss_level is supposed to be the earliest state that
has OPAL_PM_LOSE_FULL_CONTEXT set, in other places the kernel uses the
"deep" states as terminology. Hence renaming the variable to be coherent
to its semantics.
Signed-off-by: Pratik Rajesh Sampat <psampat@linux.ibm.com>
Acked-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200721153708.89057-3-psampat@linux.ibm.com
The POWER9 idle driver contains implementation-specific details that
means it is not suitable to run on any processor that implements ISA
v3.0 (e.g., POWER10), so only init the driver when running on a
POWER9.
Signed-off-by: Pratik Rajesh Sampat <psampat@linux.ibm.com>
[mpe: Use updated change log from Nick]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200721153708.89057-2-psampat@linux.ibm.com
hash_low_64.S was removed in commit a43c0eb836 ("powerpc/mm: Convert
4k insert from asm to C") and flush_hash_page() is no longer called
from any assembly routine.
Signed-off-by: Santosh Sivaraj <santosh@fossix.org>
[mpe: Tweak comment wording]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200721091915.205006-1-santosh@fossix.org
On PAPR+ the hcall() on 0x1B0 is called H_DISABLE_AND_GET, but got
defined as H_DISABLE_AND_GETC instead.
This define was introduced with a typo in commit <b13a96cfb055>
("[PATCH] powerpc: Extends HCALL interface for InfiniBand usage"), and was
later used without having the typo noticed.
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200707004812.190765-1-leobras.c@gmail.com
Both the ->dump method and snprintf return an int. So switch to an
int and properly handle errors from ->dump.
Fixes: 5456ffdee6 ("powerpc/spufs: simplify spufs core dumping")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200610085554.5647-1-hch@lst.de
Several device drivers hit EEH(Extended Error handling) when
triggering kdump on Pseries PowerVM. This patch implemented a reset of
the PHBs in pci general code when triggering kdump. PHB reset stop all
PCI transactions from normal kernel. We have tested the patch in
several enviroments:
- direct slot adapters
- adapters under the switch
- a VF adapter in PowerVM
- a VF adapter/adapter in KVM guest.
Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com>
[mpe: Fix broken whitespace, subject & SOB formatting]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594651173-32166-1-git-send-email-wenxiong@linux.vnet.ibm.com
powerpc return from interrupt and return from system call sequences
are context synchronising.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200716013522.338318-1-npiggin@gmail.com
This primitive has been renamed, but because it was spelled incorrectly in the
first place it must have escaped the fixup patch. As far as I can tell this
logic is still correct: smp_mb__after_spinlock() uses the default smp_mb()
implementation, which is "sync" rather than "hwsync" but those are the same
(though I'm not that familiar with PowerPC).
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200716193820.1141936-1-palmer@dabbelt.com
retrieve prefix instruction operands RA and pc relative bit R values
using macros and adopt it in sstep.c and test_emulate_step.c.
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200626095158.1031507-4-bala24@linux.ibm.com
testcases for `paddi` instruction to cover the negative case,
if R is equal to 1 and RA is not equal to 0, the instruction
form is invalid.
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200626095158.1031507-3-bala24@linux.ibm.com
add provision to declare test is a negative scenario, verify
whether emulation fails and avoid executing it.
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200626095158.1031507-2-bala24@linux.ibm.com
Currently prefixed instructions are dumped as two separate word
instructions. Use mread_instr() so that prefixed instructions are read
as such and update the incrementor in the loop to take this into
account.
'dump_func' is print_insn_powerpc() which comes from ppc-dis.c which is
taken from binutils. When this is updated prefixed instructions will be
disassembled.
Currently dumping prefixed instructions looks like this:
0:mon> di c000000000094168
c000000000094168 0x06000000 .long 0x6000000
c00000000009416c 0x392a0003 addi r9,r10,3
c000000000094170 0x913f0028 stw r9,40(r31)
c000000000094174 0xe93f002a lwa r9,40(r31)
c000000000094178 0x7d234b78 mr r3,r9
c00000000009417c 0x383f0040 addi r1,r31,64
c000000000094180 0xebe1fff8 ld r31,-8(r1)
c000000000094184 0x4e800020 blr
c000000000094188 0x60000000 nop
...
c000000000094190 0x3c4c0121 addis r2,r12,289
c000000000094194 0x38429670 addi r2,r2,-27024
c000000000094198 0x7c0802a6 mflr r0
c00000000009419c 0x60000000 nop
c0000000000941a0 0xe9240100 ld r9,256(r4)
c0000000000941a4 0x39400001 li r10,1
After this it looks like:
0:mon> di c000000000094168
c000000000094168 0x06000000 0x392a0003 .long 0x392a000306000000
c000000000094170 0x913f0028 stw r9,40(r31)
c000000000094174 0xe93f002a lwa r9,40(r31)
c000000000094178 0x7d234b78 mr r3,r9
c00000000009417c 0x383f0040 addi r1,r31,64
c000000000094180 0xebe1fff8 ld r31,-8(r1)
c000000000094184 0x4e800020 blr
c000000000094188 0x60000000 nop
...
c000000000094190 0x3c4c0121 addis r2,r12,289
c000000000094194 0x38429570 addi r2,r2,-27280
c000000000094198 0x7c0802a6 mflr r0
c00000000009419c 0x60000000 nop
c0000000000941a0 0xe9240100 ld r9,256(r4)
c0000000000941a4 0x39400001 li r10,1
c0000000000941a8 0x3d02000b addis r8,r2,11
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200602052728.18227-2-jniethe5@gmail.com
There are quite a few places where instructions are printed, this is
done using a '%x' format specifier. With the introduction of prefixed
instructions, this does not work well. Currently in these places,
ppc_inst_val() is used for the value for %x so only the first word of
prefixed instructions are printed.
When the instructions are word instructions, only a single word should
be printed. For prefixed instructions both the prefix and suffix should
be printed. To accommodate both of these situations, instead of a '%x'
specifier use '%s' and introduce a helper, __ppc_inst_as_str() which
returns a char *. The char * __ppc_inst_as_str() returns is buffer that
is passed to it by the caller.
It is cumbersome to require every caller of __ppc_inst_as_str() to now
declare a buffer. To make it more convenient to use __ppc_inst_as_str(),
wrap it in a macro that uses a compound statement to allocate a buffer
on the caller's stack before calling it.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
[mpe: Drop 0x prefix to match most existings uses, especially xmon]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200602052728.18227-1-jniethe5@gmail.com
Use the existing support for testing compute type instructions to test
Prefixed Add Immediate (paddi). The R bit of the paddi instruction
controls whether current instruction address is used. Add test cases
for when R=1 and for R=0. paddi has a 34 bit immediate field formed by
concatenating si0 and si1. Add tests for the extreme values of this
field.
Skip the paddi tests if ISA v3.1 is unsupported.
Some of these test cases were added by Balamuruhan S.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
[mpe: Fix conflicts with ppc-opcode.h changes, squash in .balign]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200525025923.19843-5-jniethe5@gmail.com
An a array of struct compute_test's are used to declare tests for
compute instructions. Add a cpu_feature field to struct compute_test as
an optional way to specify a cpu feature that must be present. If not
present then skip the test.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200525025923.19843-4-jniethe5@gmail.com
The tests for emulation of compute instructions execute and
emulate an instruction and then compare the results to verify the
emulation. In ISA v3.1 there are instructions that operate relative to
the NIP. Therefore set the NIP in the regs used for the emulated
instruction to the location of the executed instruction so they will
give the same result.
This is a rework of a patch by Balamuruhan S.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200525025923.19843-3-jniethe5@gmail.com
Add tests for the prefixed versions of the floating-point load/stores
that are currently tested. This includes the following instructions:
* Prefixed Load Floating-Point Single (plfs)
* Prefixed Load Floating-Point Double (plfd)
* Prefixed Store Floating-Point Single (pstfs)
* Prefixed Store Floating-Point Double (pstfd)
Skip the new tests if ISA v3.10 is unsupported.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
[mpe: Fix conflicts with ppc-opcode.h changes]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200525025923.19843-2-jniethe5@gmail.com
Add tests for the prefixed versions of the integer load/stores that
are currently tested. This includes the following instructions:
* Prefixed Load Doubleword (pld)
* Prefixed Load Word and Zero (plwz)
* Prefixed Store Doubleword (pstd)
Skip the new tests if ISA v3.1 is unsupported.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
[mpe: Fix conflicts with ppc-opcode.h changes]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200525025923.19843-1-jniethe5@gmail.com
In the current kvm version, 'kvm_run' has been included in the 'kvm_vcpu'
structure. For historical reasons, many kvm-related function parameters
retain the 'kvm_run' and 'kvm_vcpu' parameters at the same time. This
patch does a unified cleanup of these remaining redundant parameters.
[paulus@ozlabs.org - Fixed places that were missed in book3s_interrupts.S]
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Add support for the scv instruction on POWER9 and later CPUs.
For now this implements the zeroth scv vector 'scv 0', as identical to
'sc' system calls, with the exception that LR is not preserved, nor
are volatile CR registers, and error is not indicated with CR0[SO],
but by returning a negative errno.
rfscv is implemented to return from scv type system calls. It can not
be used to return from sc system calls because those are defined to
preserve LR.
getpid syscall throughput on POWER9 is improved by 26% (428 to 318
cycles), largely due to reducing mtmsr and mtspr.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Fix ppc64e build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200611081203.995112-3-npiggin@gmail.com
The scv instruction causes an interrupt which can enter the kernel with
MSR[EE]=1, thus allowing interrupts to hit at any time. These must not
be taken as normal interrupts, because they come from MSR[PR]=0 context,
and yet the kernel stack is not yet set up and r13 is not set to the
PACA).
Treat this as a soft-masked interrupt regardless of the soft masked
state. This does not affect behaviour yet, because currently all
interrupts are taken with MSR[EE]=0.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200611081203.995112-2-npiggin@gmail.com
PowerISA v3.1 has few updates for the Branch History Rolling
Buffer(BHRB).
BHRB disable is controlled via Monitor Mode Control Register A (MMCRA)
bit, namely "BHRB Recording Disable (BHRBRD)". This field controls
whether BHRB entries are written when BHRB recording is enabled by
other bits. This patch implements support for this BHRB disable bit.
By setting 0b1 to this bit will disable the BHRB and by setting 0b0 to
this bit will have BHRB enabled. This addresses backward
compatibility (for older OS), since this bit will be cleared and
hardware will be writing to BHRB by default.
This patch addresses changes to set MMCRA (BHRBRD) at boot for
power10 (there by the core will run faster) and enable this feature
only on runtime ie, on explicit need from user. Also save/restore
MMCRA in the restore path of state-loss idle state to make sure we
keep BHRB disabled if it was not enabled on request at runtime.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-12-git-send-email-atrajeev@linux.vnet.ibm.com
PowerISA v3.1 introduce filtering support for
PERF_SAMPLE_BRANCH_IND_CALL/COND. The patch adds BHRB filter
support for "ind_call" and "cond" in power10_bhrb_filter_map().
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-11-git-send-email-atrajeev@linux.vnet.ibm.com
Commit bb19af8160 ("powerpc/perf: Prevent kernel address leak to
userspace via BHRB buffer") added a check in bhrb_read() to filter
the kernel address from BHRB buffer. This patch modified it to avoid
that check for PowerISA v3.1 based processors, since PowerISA v3.1
allows only MSR[PR]=1 address to be written to BHRB buffer.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-10-git-send-email-atrajeev@linux.vnet.ibm.com
Base enablement patch to register performance monitoring hardware
support for power10. Patch introduce the raw event encoding format,
defines the supported list of events, config fields for the event
attributes and their corresponding bit values which are exported via
sysfs.
Patch also enhances the support function in isa207_common.c to include
power10 pmu hardware.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-9-git-send-email-atrajeev@linux.vnet.ibm.com
Add Power10 feature function to DT CPU features, along with a Power10
specific init() to initialize PMU SPRs, sets the oprofile_cpu_type and
cpu_features. This will enable performance monitoring unit (PMU) for
Power10 in CPU features with "performance-monitor-power10".
For Power ISA v3.1, BHRB disable is controlled via Monitor Mode
Control Register A (MMCRA) bit, namely "BHRB Recording
Disable (BHRBRD)". This patch initializes MMCRA BHRBRD to disable BHRB
feature at boot for Power10.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
[mpe: Move MMCRA_BHRB_DISABLE as noted by jpn, drop CPU setup changes]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-8-git-send-email-atrajeev@linux.vnet.ibm.com
PowerISA v3.1 added three new perfromance
monitoring unit (PMU) speical purpose register (SPR).
They are Monitor Mode Control Register 3 (MMCR3),
Sampled Instruction Event Register 2 (SIER2),
Sampled Instruction Event Register 3 (SIER3).
Patch here adds a new dump function dump_310_sprs
to print these SPR values.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-7-git-send-email-atrajeev@linux.vnet.ibm.com
Power ISA v3.1 has added new performance monitoring unit (PMU) special
purpose registers (SPRs). They are:
Monitor Mode Control Register 3 (MMCR3)
Sampled Instruction Event Register A (SIER2)
Sampled Instruction Event Register B (SIER3)
Add support to save/restore these new SPRs while entering/exiting
guest. Also include changes to support KVM_REG_PPC_MMCR3/SIER2/SIER3.
Add new SPRs to KVM API documentation.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-6-git-send-email-atrajeev@linux.vnet.ibm.com
PowerISA v3.1 includes new performance monitoring unit(PMU)
special purpose registers (SPRs). They are
Monitor Mode Control Register 3 (MMCR3)
Sampled Instruction Event Register 2 (SIER2)
Sampled Instruction Event Register 3 (SIER3)
MMCR3 is added for further sampling related configuration
control. SIER2/SIER3 are added to provide additional
information about the sampled instruction.
Patch adds new PPMU flag called "PPMU_ARCH_31" to support handling of
these new SPRs, updates the struct thread_struct to include these new
SPRs, include MMCR3 in struct mmcr_regs. This is needed to support
programming of MMCR3 SPR during event_enable/disable. Patch also adds
the sysfs support for the MMCR3 SPR along with SPRN_ macros for these
new pmu SPRs.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
[mpe: Rename to PPMU_ARCH_31 as noted by jpn]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-5-git-send-email-atrajeev@linux.vnet.ibm.com
Events of type PERF_TYPE_HW_CACHE was described for Power PMU
as: int (*cache_events)[type][op][result];
where type, op, result values unpacked from the event attribute config
value is used to generate the raw event code at runtime.
So far the event code values which used to create these cache-related
events were within 32 bit and `int` type worked. In power10,
some of the event codes are of 64-bit value and hence update the
Power PMU cache_events to `u64` type in `power_pmu` struct.
Also propagate this change to existing all PMU driver code paths
which are using ppmu->cache_events.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-4-git-send-email-atrajeev@linux.vnet.ibm.com
Currently `kvm_vcpu_arch` stores all Monitor Mode Control registers
in a flat array in order: mmcr0, mmcr1, mmcra, mmcr2, mmcrs
Split this to give mmcra and mmcrs its own entries in vcpu and
use a flat array for mmcr0 to mmcr2. This patch implements this
cleanup to make code easier to read.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Fix MMCRA/MMCR2 uapi breakage as noted by paulus]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-3-git-send-email-atrajeev@linux.vnet.ibm.com
PowerPC always re-builds DTB even if nothing has been changed.
As for other architectures, arch/*/boot/dts/Makefile builds DTB by
using the dtb-y syntax.
In contrast, arch/powerpc/boot/dts/(fsl/)Makefile does nothing unless
CONFIG_OF_ALL_DTBS is defined. Instead, arch/powerpc/boot/Makefile
builds DTB on demand. You need to add DTB to 'targets' explicitly
so .*.cmd files are included.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
core-book3s currently uses array to store the MMCR registers as part
of per-cpu `cpu_hw_events`. This patch does a clean up to use `struct`
to store mmcr regs instead of array. This will make code easier to read
and reduces chance of any subtle bug that may come in the future, say
when new registers are added. Patch updates all relevant code that was
using MMCR array ( cpuhw->mmcr[x]) to use newly introduced `struct`.
This includes the PMU driver code for supported platforms (power5
to power9) and ISA macros for counter support functions.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-2-git-send-email-atrajeev@linux.vnet.ibm.com
Compilation error:
arch/powerpc/perf/perf_regs.c:80:undefined reference to `.is_sier_available'
Currently is_sier_available() is part of core-book3s.c, which is added
to build based on CONFIG_PPC_PERF_CTRS.
A config with CONFIG_PERF_EVENTS and without CONFIG_PPC_PERF_CTRS will
have a build break because of missing is_sier_available().
In practice it only breaks when CONFIG_FSL_EMB_PERF_EVENT=n because
that also guards the usage of is_sier_available(). That only happens
with CONFIG_PPC_BOOK3E_64=y and CONFIG_FSL_SOC_BOOKE=n.
Patch adds is_sier_available() in asm/perf_event.h to fix the build
break for configs missing CONFIG_PPC_PERF_CTRS.
Fixes: 333804dc3b ("powerpc/perf: Update perf_regs structure to include SIER")
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
[mpe: Add detail about CONFIG_FSL_SOC_BOOKE]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200614083604.302611-1-maddy@linux.ibm.com
The subpage_prot syscall was added for specialised system software
(Lx86) that has been discontinued for about 7 years, and is not thought
to be used elsewhere, so disable it by default.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200703011958.1166620-4-npiggin@gmail.com
ISA v3.1 does not support the SAO storage control attribute required to
implement PROT_SAO. PROT_SAO was used by specialised system software
(Lx86) that has been discontinued for about 7 years, and is not thought
to be used elsewhere, so removal should not cause problems.
We rather remove it than keep support for older processors, because
live migrating guest partitions to newer processors may not be possible
if SAO is in use (or worse allowed with silent races).
- PROT_SAO stays in the uapi header so code using it would still build.
- arch_validate_prot() is removed, the generic version rejects PROT_SAO
so applications would get a failure at mmap() time.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Drop KVM change for the time being]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200703011958.1166620-3-npiggin@gmail.com
This comment is wrong, we wouldn't use calc_vm_prot_bits() here
because we are being called by calc_vm_prot_bits() to modify its
behaviour.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200703011958.1166620-2-npiggin@gmail.com
Both of those functions are only called from 64-bit only code, so the
stubs should not be needed at all.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200717112714.19304-1-yuehaibing@huawei.com
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200718103958.5455-1-grandmaster@al2klimov.de
Currently the spu coredump code triggers an RCU warning:
=============================
WARNING: suspicious RCU usage
5.7.0-rc3-01755-g7cd49f0b7ec7 #1 Not tainted
-----------------------------
include/linux/fdtable.h:95 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by spu-coredump/1343:
#0: c0000007fa22f430 (sb_writers#2){.+.+}-{0:0}, at: .do_coredump+0x1010/0x13c8
stack backtrace:
CPU: 0 PID: 1343 Comm: spu-coredump Not tainted 5.7.0-rc3-01755-g7cd49f0b7ec7 #1
Call Trace:
.dump_stack+0xec/0x15c (unreliable)
.lockdep_rcu_suspicious+0x120/0x144
.coredump_next_context+0x148/0x158
.spufs_coredump_extra_notes_size+0x54/0x190
.elf_coredump_extra_notes_size+0x34/0x50
.elf_core_dump+0xe48/0x19d0
.do_coredump+0xe50/0x13c8
.get_signal+0x864/0xd88
.do_notify_resume+0x158/0x3c8
.interrupt_exit_user_prepare+0x19c/0x208
interrupt_return+0x14/0x1c0
This comes from fcheck_files() via fcheck().
It's pretty clearly documented that fcheck() must be wrapped with
rcu_read_lock(), adding that fixes the RCU warning.
hch points out that once we've released the RCU read lock the file may
be closed and freed, which would leave us with a pointer to a freed
spu_context.
To avoid that, take a reference to the spu_context while we hold the
RCU read lock, and drop that reference later once we're done with the
context.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200508130633.2532759-1-mpe@ellerman.id.au
There is only one caller to this function and the function is wrongly
named. Avoid further confusion w.r.t name and open code this at the
only call site. Also remove read_uamor(). There are no users for
the same after this.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-24-aneesh.kumar@linux.ibm.com
The kvm_vcpu_read_guest/kvm_vcpu_write_guest used for nested guests
eventually call srcu_dereference_check to dereference a memslot and
lockdep produces a warning as neither kvm->slots_lock nor
kvm->srcu lock is held and kvm->users_count is above zero (>100 in fact).
This wraps mentioned VCPU read/write helpers in srcu read lock/unlock as
it is done in other places. This uses vcpu->srcu_idx when possible.
These helpers are only used for nested KVM so this may explain why
we did not see these before.
Here is an example of a warning:
=============================
WARNING: suspicious RCU usage
5.7.0-rc3-le_dma-bypass.3.2_a+fstn1 #897 Not tainted
-----------------------------
include/linux/kvm_host.h:633 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by qemu-system-ppc/2752:
#0: c000200359016be0 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x144/0xd80 [kvm]
stack backtrace:
CPU: 80 PID: 2752 Comm: qemu-system-ppc Not tainted 5.7.0-rc3-le_dma-bypass.3.2_a+fstn1 #897
Call Trace:
[c0002003591ab240] [c000000000b23ab4] dump_stack+0x190/0x25c (unreliable)
[c0002003591ab2b0] [c00000000023f954] lockdep_rcu_suspicious+0x140/0x164
[c0002003591ab330] [c008000004a445f8] kvm_vcpu_gfn_to_memslot+0x4c0/0x510 [kvm]
[c0002003591ab3a0] [c008000004a44c18] kvm_vcpu_read_guest+0xa0/0x180 [kvm]
[c0002003591ab410] [c008000004ff9bd8] kvmhv_enter_nested_guest+0x90/0xb80 [kvm_hv]
[c0002003591ab980] [c008000004fe07bc] kvmppc_pseries_do_hcall+0x7b4/0x1c30 [kvm_hv]
[c0002003591aba10] [c008000004fe5d30] kvmppc_vcpu_run_hv+0x10a8/0x1a30 [kvm_hv]
[c0002003591abae0] [c008000004a5d954] kvmppc_vcpu_run+0x4c/0x70 [kvm]
[c0002003591abb10] [c008000004a56e54] kvm_arch_vcpu_ioctl_run+0x56c/0x7c0 [kvm]
[c0002003591abba0] [c008000004a3ddc4] kvm_vcpu_ioctl+0x4ac/0xd80 [kvm]
[c0002003591abd20] [c0000000006ebb58] ksys_ioctl+0x188/0x210
[c0002003591abd70] [c0000000006ebc28] sys_ioctl+0x48/0xb0
[c0002003591abdb0] [c000000000042764] system_call_exception+0x1d4/0x2e0
[c0002003591abe20] [c00000000000cce8] system_call_common+0xe8/0x214
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
POWER8 and POWER9 have 12-bit LPIDs. Change LPID_RSVD to support up to
(4096 - 2) guests on these processors. POWER7 is kept the same with a
limitation of (1024 - 2), but it might be time to drop KVM support for
POWER7.
Tested with 2048 guests * 4 vCPUs on a witherspoon system with 512G
RAM and a bit of swap.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Adds support for emulating ISAv3.1 guests by adding the appropriate PCR
and FSCR bits.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
UAMOR values are not application-specific. The kernel initializes
its value based on different reserved keys. Remove the thread-specific
UAMOR value and don't switch the UAMOR on context switch.
Move UAMOR initialization to key initialization code and remove
thread_struct.uamor because it is not used anymore.
Before commit: 4a4a5e5d2a ("powerpc/pkeys: key allocation/deallocation must not change pkey registers")
we used to update uamor based on key allocation and free.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-20-aneesh.kumar@linux.ibm.com
As we kexec across kernels that use AMR/IAMR for different purposes
we need to ensure that new kernels get kexec'd with a reset value
of AMR/IAMR. For ex: the new kernel can use key 0 for kernel mapping and the old
AMR value prevents access to key 0.
This patch also removes reset if IAMR and AMOR in kexec_sequence. Reset of AMOR
is not needed and the IAMR reset is partial (it doesn't do the reset
on secondary cpus) and is redundant with this patch.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-19-aneesh.kumar@linux.ibm.com
Parse storage keys related device tree entry in early_init_devtree
and enable MMU feature MMU_FTR_PKEY if pkeys are supported.
MMU feature is used instead of CPU feature because this enables us
to group MMU_FTR_KUAP and MMU_FTR_PKEY in asm feature fixup code.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-14-aneesh.kumar@linux.ibm.com
The hypervisor can return less than max allowed pkey (for ex: 31) instead
of 32. We should mark all the pkeys above max allowed as reserved so
that we avoid the allocation of the wrong pkey(for ex: key 31 in the above
case) by userspace.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-13-aneesh.kumar@linux.ibm.com
initial_allocation_mask is not used outside this file.
Also mark reserved_allocation_mask and initial_allocation_mask __ro_after_init;
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-12-aneesh.kumar@linux.ibm.com
Make the default value FALSE (pkey enabled) and set to TRUE when we
find the total number of keys supported to be zero.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-10-aneesh.kumar@linux.ibm.com
Add documentation explaining the execute_only_key. The reservation and initialization mask
details are also explained in this patch.
No functional change in this patch.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-7-aneesh.kumar@linux.ibm.com
This number the pkey bit such that it is easy to follow. PKEY_BIT0 is
the lower order bit. This makes further changes easy to follow.
No functional change in this patch other than linux page table for
hash translation now maps pkeys differently.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-3-aneesh.kumar@linux.ibm.com
We are wrongly using CPU_FTRS_POWER8 to check for P8 support. Instead, we should
use PVR value. Now considering we are using CPU_FTRS_POWER8, that
implies we returned true for P9 with older firmware. Keep the same behavior
by checking for P9 PVR value.
Fixes: cf43d3b264 ("powerpc: Enable pkey subsystem")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-2-aneesh.kumar@linux.ibm.com
Subscribe to the MCE notification and add the physical address which
generated a memory error to nvdimm bad range.
Signed-off-by: Santosh Sivaraj <santosh@fossix.org>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709135142.721504-2-santosh@fossix.org
Introduce notification chain which lets us know about uncorrected memory
errors(UE). This would help prospective users in pmem or nvdimm subsystem
to track bad blocks for better handling of persistent memory allocations.
Signed-off-by: Santosh Sivaraj <santosh@fossix.org>
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709135142.721504-1-santosh@fossix.org
To enable memory unplug without splitting kernel page table
mapping, we force the max mapping size to the LMB size. LMB
size is the unit in which hypervisor will do memory add/remove
operation.
Pseries systems supports max LMB size of 256MB. Hence on pseries,
we now end up mapping memory with 2M page size instead of 1G. To improve
that we want hypervisor to hint the kernel about the hotplug
memory range. That was added that as part of
commit b6eca183e2 ("powerpc/kernel: Enables memory
hot-remove after reboot on pseries guests")
But PowerVM doesn't provide that hint yet. Once we get PowerVM
updated, we can then force the 2M mapping only to hot-pluggable
memory region using memblock_is_hotpluggable(). Till then
let's depend on LMB size for finding the mapping page size
for linear range.
With this change KVM guest will also be doing linear mapping with
2M page size.
The actual TLB benefit of mapping guest page table entries with
hugepage size can only be materialized if the partition scoped
entries are also using the same or higher page size. A guest using
1G hugetlbfs backing guest memory can have a performance impact with
the above change.
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Fold in fix from Aneesh spotted by lkp@intel.com]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709131925.922266-5-aneesh.kumar@linux.ibm.com
We split the page table mapping on memory unplug if the
linear range was mapped with huge page mapping (for ex: 1G)
The page table splitting code has a few issues:
1. Recursive locking
--------------------
Memory unplug path takes cpu_hotplug_lock and calls stop_machine()
for splitting the mappings. However stop_machine() takes
cpu_hotplug_lock again causing deadlock.
2. BUG: sleeping function called from in_atomic() context
---------------------------------------------------------
Memory unplug path (remove_pagetable) takes init_mm.page_table_lock
spinlock and later calls stop_machine() which does wait_for_completion()
3. Bad unlock unbalance
-----------------------
Memory unplug path takes init_mm.page_table_lock spinlock and calls
stop_machine(). The stop_machine thread function runs in a different
thread context (migration thread) which tries to release and reaquire
ptl. Releasing ptl from a different thread than which acquired it
causes bad unlock unbalance.
These problems can be avoided if we avoid mapping hot-plugged memory
with 1G mapping, thereby removing the need for splitting them during
unplug. The kernel always make sure the minimum unplug request is
SUBSECTION_SIZE for device memory and SECTION_SIZE for regular memory.
In preparation for such a change remove page table splitting support.
This essentially is a revert of
commit 4dd5f8a99e ("powerpc/mm/radix: Split linear mapping on hot-unplug")
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709131925.922266-4-aneesh.kumar@linux.ibm.com
We can hit the following BUG_ON during memory unplug:
kernel BUG at arch/powerpc/mm/book3s64/pgtable.c:342!
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
NIP [c000000000093308] pmd_fragment_free+0x48/0xc0
LR [c00000000147bfec] remove_pagetable+0x578/0x60c
Call Trace:
0xc000008050000000 (unreliable)
remove_pagetable+0x384/0x60c
radix__remove_section_mapping+0x18/0x2c
remove_section_mapping+0x1c/0x3c
arch_remove_memory+0x11c/0x180
try_remove_memory+0x120/0x1b0
__remove_memory+0x20/0x40
dlpar_remove_lmb+0xc0/0x114
dlpar_memory+0x8b0/0xb20
handle_dlpar_errorlog+0xc0/0x190
pseries_hp_work_fn+0x2c/0x60
process_one_work+0x30c/0x810
worker_thread+0x98/0x540
kthread+0x1c4/0x1d0
ret_from_kernel_thread+0x5c/0x74
This occurs when unplug is attempted for such memory which has
been mapped using memblock pages as part of early kernel page
table setup. We wouldn't have initialized the PMD or PTE fragment
count for those PMD or PTE pages.
This can be fixed by allocating memory in PAGE_SIZE granularity
during early page table allocation. This makes sure a specific
page is not shared for another memblock allocation and we can
free them correctly on removing page-table pages.
Since we now do PAGE_SIZE allocations for both PUD table and
PMD table (Note that PTE table allocation is already of PAGE_SIZE),
we end up allocating more memory for the same amount of system RAM.
Here is a comparision of how much more we need for a 64T and 2G
system after this patch:
1. 64T system
-------------
64T RAM would need 64G for vmemmap with struct page size being 64B.
128 PUD tables for 64T memory (1G mappings)
1 PUD table and 64 PMD tables for 64G vmemmap (2M mappings)
With default PUD[PMD]_TABLE_SIZE(4K), (128+1+64)*4K=772K
With PAGE_SIZE(64K) table allocations, (128+1+64)*64K=12352K
2. 2G system
------------
2G RAM would need 2M for vmemmap with struct page size being 64B.
1 PUD table for 2G memory (1G mapping)
1 PUD table and 1 PMD table for 2M vmemmap (2M mappings)
With default PUD[PMD]_TABLE_SIZE(4K), (1+1+1)*4K=12K
With new PAGE_SIZE(64K) table allocations, (1+1+1)*64K=192K
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709131925.922266-2-aneesh.kumar@linux.ibm.com
When '029ab30b4c0a ("powerpc/mm: Enable radix GTSE only if supported.")'
made GTSE an MMU feature, it was enabled by default in
powerpc-cpu-features but was missed in pa-features. This causes random
memory corruption during boot of PowerNV kernels where
CONFIG_PPC_DT_CPU_FTRS isn't enabled.
Fixes: 029ab30b4c ("powerpc/mm: Enable radix GTSE only if supported.")
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
[mpe: Unwrap long line]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200720044258.863574-1-bharata@linux.ibm.com
Now that the ->compat_{get,set}sockopt proto_ops methods are gone
there is no good reason left to keep the compat syscalls separate.
This fixes the odd use of unsigned int for the compat_setsockopt
optlen and the missing sock_use_custom_sol_socket.
It would also easily allow running the eBPF hooks for the compat
syscalls, but such a large change in behavior does not belong into
a consolidation patch like this one.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the DMA API bypass mechanism for direct window mappings. This uses
common code and speed up the direct mapping case by avoiding indirect
calls just when not using dma ops at all. It also fixes a problem where
the sync_* methods were using the bypass check for DMA allocations, but
those are part of the streaming ops.
Note that this patch loses the DMA_ATTR_WEAK_ORDERING override, which
has never been well defined, as is only used by a few drivers, which
IIRC never showed up in the typical Cell blade setups that are affected
by the ordering workaround.
Fixes: efd176a04b ("powerpc/pseries/dma: Allow SWIOTLB")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Avoid the overhead of the dma ops support for tiny builds that only
use the direct mapping.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Using uninitialized_var() is dangerous as it papers over real bugs[1]
(or can in the future), and suppresses unrelated compiler warnings
(e.g. "unused variable"). If the compiler thinks it is uninitialized,
either simply initialize the variable or make compiler changes.
In preparation for removing[2] the[3] macro[4], remove all remaining
needless uses with the following script:
git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \
xargs perl -pi -e \
's/\buninitialized_var\(([^\)]+)\)/\1/g;
s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;'
drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid
pathological white-space.
No outstanding warnings were found building allmodconfig with GCC 9.3.0
for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64,
alpha, and m68k.
[1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/
[2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/
[3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/
[4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/
Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5
Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB
Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers
Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs
Signed-off-by: Kees Cook <keescook@chromium.org>
The device-tree properties to check secure and trusted boot state are
different for guests (pseries) compared to baremetal (powernv).
This patch updates the existing is_ppc_secureboot_enabled() and
is_ppc_trustedboot_enabled() functions to add support for pseries.
For pseries the secureboot and trustedboot state are exposed via
device-tree properties /ibm,secure-boot and /ibm,trusted-boot.
The values of ibm,secure-boot under pseries are interpreted as:
0 - Disabled
1 - Enabled in Log-only mode. This patch interprets this value as
disabled, since audit mode is currently not supported for
Linux.
2 - Enabled and enforced.
3-9 - Enabled and enforcing; requirements are at the discretion of
the operating system.
The values of ibm,trusted-boot under pseries are interpreted as:
0 - Disabled
1 - Enabled
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
[mpe: Drop machdep.h inclusion, tweak change log slightly]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594813921-12425-1-git-send-email-nayna@linux.ibm.com
The code in vdso_cpu_init that exposes the cpu and numa node to
userspace via SPRG_VDSO incorrctly masks the cpu to 12 bits. This means
that any kernel running on a box with more than 4096 threads (NR_CPUS
advertises a limit of of 8192 cpus) would expose userspace to two cpu
contexts running at the same time with the same cpu number.
Note: I'm not aware of any distro shipping a kernel with support for more
than 4096 threads today, nor of any system image that currently exceeds
4096 threads. Found via code browsing.
Fixes: 18ad51dd34 ("powerpc: Add VDSO version of getcpu")
Signed-off-by: Milton Miller <miltonm@us.ibm.com>
Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200715233704.1352257-1-anton@ozlabs.org
IMC trace-mode record has MSR[HV PR] bits added in the third DW.
These bits can be used to set the cpumode for the instruction pointer
captured in each sample.
Add support in kernel to use these bits to set the cpumode for
each sample.
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200713144623.508695-1-maddy@linux.ibm.com
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200713192656.37443-1-grandmaster@al2klimov.de
Booting with a 4GB LMB size causes us to panic:
qemu-system-ppc64: OS terminated: OS panic:
Memory block size not suitable: 0x0
Fix pseries_memory_block_size() to handle 64 bit LMBs.
Cc: stable@vger.kernel.org
Signed-off-by: Anton Blanchard <anton@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200715000820.1255764-1-anton@ozlabs.org
When we enter into fadump crash path via system reset we fail to update
the pstore.
On the system reset path we first update the pstore then we go for fadump
crash. But the problem here is when all the CPUs try to get the pstore
lock to initiate the pstore write, only one CPUs will acquire the lock
and proceed with the pstore write. Since it in NMI context CPUs that fail
to get lock do not wait for their turn to write to the pstore and simply
proceed with the next operation which is fadump crash. One of the CPU who
proceeded with fadump crash path triggers the crash and does not wait for
the CPU who gets the pstore lock to complete the pstore update.
Timeline diagram to depicts the sequence of events that leads to an
unsuccessful pstore update when we hit fadump crash path via system reset.
1 2 3 ... n CPU Threads
| | | |
| | | |
Reached to -->|--->|---->| ----------->|
system reset | | | |
path | | | |
| | | |
Try to -->|--->|---->|------------>|
acquire the | | | |
pstore lock | | | |
| | | |
| | | |
Got the -->| +->| | |<-+
pstore lock | | | | | |--> Didn't get the
| --------------------------+ lock and moving
| | | | ahead on fadump
| | | | crash path
| | | |
Begins the -->| | | |
process to | | | |<-- Got the chance to
update the | | | | trigger the crash
pstore | -> | | ... <- |
| | | | | |
| | | | | |<-- Triggers the
| | | | | | crash
| | | | | | ^
| | | | | | |
Writing to -->| | | | | | |
pstore | | | | | | |
| | |
^ |__________________| |
| CPU Relax |
| |
+-----------------------------------------+
|
v
Race: crash triggered before pstore
update completes
To avoid this race condition a barrier is added on crash_fadump path, it
prevents the CPU to trigger the crash until all the online CPUs completes
their task.
A barrier is added to make sure all the secondary CPUs hit the
crash_fadump function before we initiates the crash. A timeout is kept to
ensure the primary CPU (one who initiates the crash) do not wait for
secondary CPUs indefinitely.
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200713052435.183750-1-sourabhjain@linux.ibm.com
Generic code has a wrapper to implement cputime_to_nsecs() on top of
cputime_to_usecs() but we can easily return the full nanosecond
resolution directly.
Signed-off-by: Anton Blanchard <anton@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200713083601.1103978-1-anton@ozlabs.org
Lots of PPC_INST_* macros are used only ever in PPC_* macros, fold
those PPC_INST_* into PPC_RAW_* to avoid using PPC_INST_*
accidentally.
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
[mpe: Deal with PHWSYNC, PLWSYNC]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200624113038.908074-7-bala24@linux.ibm.com
Wrap existing stringify macros to reuse raw instruction encoding
macros that are newly added.
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
[mpe: Add DCBFPS, DCBSTPS, PHWSYNC, PLWSYNC]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200624113038.908074-6-bala24@linux.ibm.com
Move macro definitions of powerpc instructions from bpf_jit.h to
ppc-opcode.h and adopt the users of the macros accordingly. `PPC_MR()`
is defined twice in bpf_jit.h, remove the duplicate one.
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200624113038.908074-5-bala24@linux.ibm.com
Remove duplicate macro definitions from bpf_jit.h and reuse the macros
from ppc-opcode.h
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200624113038.908074-4-bala24@linux.ibm.com
Few ppc instructions are encoded in test_emulate_step.c, consolidate
them and use it from ppc-opcode.h
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200624113038.908074-3-bala24@linux.ibm.com
Introduce PPC_RAW_* macros to have all the bare encoding of ppc
instructions. Move `VSX_XX*()` and `TMRN()` macros up to reuse it.
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
[mpe: Add DCBFPS, DCBSTPS, PHWSYNC, PLWSYNC]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200624113038.908074-2-bala24@linux.ibm.com
Patch here adds a cpumask attr to hv_24x7 pmu along with ABI documentation.
Primary use to expose the cpumask is for the perf tool which has the
capability to parse the driver sysfs folder and understand the
cpumask file. Having cpumask file will reduce the number of perf command
line parameters (will avoid "-C" option in the perf tool
command line). It can also notify the user which is
the current cpu used to retrieve the counter data.
command:# cat /sys/devices/hv_24x7/interface/cpumask
0
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709051836.723765-3-kjain@linux.ibm.com
Patch here adds cpu hotplug functions to hv_24x7 pmu.
A new cpuhp_state "CPUHP_AP_PERF_POWERPC_HV_24x7_ONLINE" enum
is added.
The online callback function updates the cpumask only if its
empty. As the primary intention of adding hotplug support
is to designate a CPU to make HCALL to collect the
counter data.
The offline function test and clear corresponding cpu in a cpumask
and update cpumask to any other active cpu.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709051836.723765-2-kjain@linux.ibm.com
pseries_update_drconf_memory() runs from a DT notifier in response to
an update to the ibm,dynamic-memory property of the
/ibm,dynamic-reconfiguration-memory node. This property is an older
less compact format than the ibm,dynamic-memory-v2 property used in
most currently supported firmwares. There has never been an equivalent
function for the v2 property.
pseries_update_drconf_memory() compares the 'assigned' flag for each
LMB in the old vs new properties and adds or removes the block
accordingly. However it appears to be of no actual utility:
* Partition suspension and PRRNs are specified only to change LMBs'
NUMA affinity information. This notifier should be a no-op for those
scenarios since the assigned flags should not change.
* The memory hotplug/DLPAR path has a hack which short-circuits
execution of the notifier:
dlpar_memory()
...
rtas_hp_event = true;
drmem_update_dt()
of_update_property()
pseries_memory_notifier()
pseries_update_drconf_memory()
if (rtas_hp_event) return;
So this code only makes sense as a relic of the time when more of the
DLPAR workflow took place in user space. I don't see a purpose for it
now.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-19-nathanl@linux.ibm.com
dlpar_memory() no longer has any callers which pass
PSERIES_HP_ELOG_ACTION_READD. Remove this case and the corresponding
unreachable code.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-17-nathanl@linux.ibm.com
pseries_devicetree_update() is no longer called with PRRN_SCOPE. The
purpose of prrn_update_node() was to remove and then add back a LMB
whose NUMA assignment had changed. This has never been reliable, and
this codepath has been default-disabled for several releases. Remove
prrn_update_node().
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-16-nathanl@linux.ibm.com
Since arch_update_cpu_topology() doesn't do anything on powerpc now,
remove it and associated dead code.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-15-nathanl@linux.ibm.com
All users of this prrn_is_enabled() are gone; remove it.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-14-nathanl@linux.ibm.com
prrn_is_enabled() always returns false/0, so handle_rtas_event() can
be simplified and some dead code can be removed. Use machine_is()
instead of #ifdef to run this code only on pseries, and add an
informational ratelimited message that we are ignoring the
events. PRRN events are relatively rare in normal operation and
usually arise from operator-initiated actions such as a DPO (Dynamic
Platform Optimizer) run.
Eventually we do want to consume these events and update the device
tree, but that needs more care to be safe vs LPM and DLPAR.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-13-nathanl@linux.ibm.com
These APIs have become no-ops, so remove them and all call sites.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-12-nathanl@linux.ibm.com
timed_topology_update is a no-op now, so remove it and all call sites.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-11-nathanl@linux.ibm.com
Previous changes have removed the code which sets bits in
cpu_associativity_changes_mask and thus it is never modifed at
runtime. From this we can reason that numa_update_cpu_topology()
always returns 0 without doing anything. Remove the body of
numa_update_cpu_topology() and remove all code which becomes
unreachable as a result.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-10-nathanl@linux.ibm.com
These flags are always zero now; remove them and suitably adjust the
remaining references to them.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-9-nathanl@linux.ibm.com
Since vphn_enabled is always 0, we can remove the call to
topology_schedule_update() and remove the code which becomes
unreachable as a result.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-8-nathanl@linux.ibm.com
Since vphn_enabled is always 0, we can stub out
timed_topology_update() and remove the code which becomes unreachable.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-7-nathanl@linux.ibm.com
Previous changes have made it so these flags are never changed;
enforce this by making them const.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-6-nathanl@linux.ibm.com
Since the topology_updates_enabled flag is now always false, remove it
and the code which has become unreachable. This is the minimum change
that prevents 'defined but unused' warnings emitted by the compiler
after stubbing out the start/stop_topology_updates() functions.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-5-nathanl@linux.ibm.com
Remove the /proc/powerpc/topology_updates interface and the
topology_updates=on/off command line argument. The internal
topology_updates_enabled flag remains for now, but always false.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-4-nathanl@linux.ibm.com
Partition suspension, used for hibernation and migration, requires
that the OS place all but one of the LPAR's processor threads into one
of two states prior to calling the ibm,suspend-me RTAS function:
* the architected offline state (via RTAS stop-self); or
* the H_JOIN hcall, which does not return until the partition
resumes execution
Using H_CEDE as the offline mode, introduced by
commit 3aa565f53c ("powerpc/pseries: Add hooks to put the CPU into
an appropriate offline state"), means that any threads which are
offline from Linux's point of view must be moved to one of those two
states before a partition suspension can proceed.
This was eventually addressed in commit 120496ac2d ("powerpc: Bring
all threads online prior to migration/hibernation"), which added code
to temporarily bring up any offline processor threads so they can call
H_JOIN. Conceptually this is fine, but the implementation has had
multiple races with cpu hotplug operations initiated from user
space[1][2][3], the error handling is fragile, and it generates
user-visible cpu hotplug events which is a lot of noise for a platform
feature that's supposed to minimize disruption to workloads.
With commit 3aa565f53c ("powerpc/pseries: Add hooks to put the CPU
into an appropriate offline state") reverted, this code becomes
unnecessary, so remove it. Since any offline CPUs now are truly
offline from the platform's point of view, it is no longer necessary
to bring up CPUs only to have them call H_JOIN and then go offline
again upon resuming. Only active threads are required to call H_JOIN;
stopped threads can be left alone.
[1] commit a6717c01dd ("powerpc/rtas: use device model APIs and
serialization during LPM")
[2] commit 9fb603050f ("powerpc/rtas: retry when cpu offline races
with suspend/migration")
[3] commit dfd718a2ed ("powerpc/rtas: Fix a potential race between
CPU-Offline & Migration")
Fixes: 120496ac2d ("powerpc: Bring all threads online prior to migration/hibernation")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-3-nathanl@linux.ibm.com
This effectively reverts commit 3aa565f53c ("powerpc/pseries: Add
hooks to put the CPU into an appropriate offline state"), which added
an offline mode for CPUs which uses the H_CEDE hcall instead of the
architected stop-self RTAS function in order to facilitate "folding"
of dedicated mode processors on PowerVM platforms to achieve energy
savings. This has been the default offline mode since its
introduction.
There's nothing about stop-self that would prevent the hypervisor from
achieving the energy savings available via H_CEDE, so the original
premise of this change appears to be flawed.
I also have encountered the claim that the transition to and from
ceded state is much faster than stop-self/start-cpu. Certainly we
would not want to use stop-self as an *idle* mode. That is what H_CEDE
is for. However, this difference is insignificant in the context of
Linux CPU hotplug, where the latency of an offline or online operation
on current systems is on the order of 100ms, mainly attributable to
all the various subsystems' cpuhp callbacks.
The cede offline mode also prevents accurate accounting, as discussed
before:
https://lore.kernel.org/linuxppc-dev/1571740391-3251-1-git-send-email-ego@linux.vnet.ibm.com/
Unconditionally use stop-self to offline processor threads. This is
the architected method for offlining CPUs on PAPR systems.
The "cede_offline" boot parameter is rendered obsolete.
Removing this code enables the removal of the partition suspend code
which temporarily onlines all present CPUs.
Fixes: 3aa565f53c ("powerpc/pseries: Add hooks to put the CPU into an appropriate offline state")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-2-nathanl@linux.ibm.com
If both count cache and link stack are to be flushed, and can be flushed
with the special bcctr, patch that in directly to the flush/branch nop
site.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200609070610.846703-7-npiggin@gmail.com
Branch cache flushing code patching has inter-dependencies on both the
link stack and the count cache flushing state.
To make the code clearer and to separate the link stack and count
cache handling, split the "toggle" (setting up variables and printing
enable/disable) from the code patching.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Always print something, even if the flush is disabled]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200609070610.846703-5-npiggin@gmail.com
Prepare to allow for hardware link stack flushing by using the
none/sw/hw type, same as the count cache state.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200609070610.846703-3-npiggin@gmail.com
The count cache flush mostly refers to both count cache and link stack
flushing. As a first step to untangling these a bit, re-name the bits
that apply to both.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200609070610.846703-2-npiggin@gmail.com
When a FP/VEC/VSX unavailable fault loads registers and enables the
facility in the MSR, re-set the lazy restore counters to 1 rather
than incrementing them so every fault gets the same number of
restores before the next fault.
This probably shouldn't be a practical change because if a lazy counter
was non-zero then it should have been restored and would not cause a
fault when userspace tries to access it. However the code and comment
implies otherwise so that's misleading and unnecessary.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200623234139.2262227-3-npiggin@gmail.com
Before returning to user, if there are missing FP/VEC/VSX bits from the
user MSR then those registers had been saved and must be restored again
before use. restore_math will decide whether to restore immediately, or
skip the restore and let fp/vec/vsx unavailable faults demand load the
registers.
Each time restore_math restores one of the FP/VSX or VEC register sets
is loaded, an 8-bit counter is incremented (load_fp and load_vec). When
these wrap to zero, restore_math no longer restores that register set
until after they are next demand faulted.
It's quite usual for those counters to have different values, so if one
wraps to zero and restore_math no longer restores its registers or user
MSR bit but the other is not zero yet does not need to be restored
(because the kernel is not frequently using the FPU), then restore_math
will be called and it will also not return in the early exit check.
This causes msr_check_and_set to test and set the MSR at every kernel
exit despite having no work to do.
This can cause workloads (e.g., a NULL syscall microbenchmark) to run
fast for a time while both counters are non-zero, then slow down when
one of the counters reaches zero, then speed up again after the second
counter reaches zero. The cost is significant, about 10% slowdown on a
NULL syscall benchmark, and the jittery behaviour is very undesirable.
Fix this by having restore_math test all conditions first, and only
update MSR if we will be loading registers.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200623234139.2262227-2-npiggin@gmail.com
The TM test in restore_math added by commit dc16b553c9 ("powerpc:
Always restore FPU/VEC/VSX if hardware transactional memory in use") is
no longer necessary after commit a8318c13e7 ("powerpc/tm: Fix
restoring FP/VMX facility incorrectly on interrupts"), which removed
the cases where restore_math has to restore if TM is active.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200623234139.2262227-1-npiggin@gmail.com
With kernel now supporting new pmem flush/sync instructions, we can now
enable the kernel to initialize the device. On P10 these devices would
appear with a new compatible string. For PAPR device we have
compatible "ibm,pmemory-v2"
and for OF pmem device we have
compatible "pmem-region-v2"
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200701072235.223558-8-aneesh.kumar@linux.ibm.com
nvdimm expect the flush routines to just mark the cache clean. The barrier
that mark the store globally visible is done in nvdimm_flush().
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200701072235.223558-7-aneesh.kumar@linux.ibm.com
pmem on POWER10 can now use phwsync instead of hwsync to ensure
all previous writes are architecturally visible for the platform
buffer flush.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200701072235.223558-6-aneesh.kumar@linux.ibm.com
Start using dcbstps; phwsync; sequence for flushing persistent memory range.
The new instructions are implemented as a variant of dcbf and hwsync and on
P8 and P9 they will be executed as those instructions. We avoid using them on
older hardware. This helps to avoid difficult to debug bugs.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200701072235.223558-4-aneesh.kumar@linux.ibm.com
POWER10 introduces two new variants of dcbf instructions (dcbstps and dcbfps)
that can be used to write modified locations back to persistent storage.
Additionally, POWER10 also introduce phwsync and plwsync which can be used
to establish order of these writes to persistent storage.
This patch exposes these instructions to the rest of the kernel. The existing
dcbf and hwsync instructions in P8 and P9 are adequate to enable appropriate
synchronization with OpenCAPI-hosted persistent storage. Hence the new
instructions are added as a variant of the old ones that old hardware
won't differentiate.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200701072235.223558-3-aneesh.kumar@linux.ibm.com
The PAPR based virtualized persistent memory devices are only supported on
POWER9 and above. In the followup patch, the kernel will switch the persistent
memory cache flush functions to use a new `dcbf` variant instruction. The new
instructions even though added in ISA 3.1 works even on P8 and P9 because these
are implemented as a variant of existing `dcbf` and `hwsync` and on P8 and
P9 behaves as such.
Considering these devices are only supported on P8 and above, update the driver
to prevent a P7-compat guest from using persistent memory devices.
We don't update of_pmem driver with the same condition, because, on bare-metal,
the firmware enables pmem support only on P9 and above. There the kernel depends
on OPAL firmware to restrict exposing persistent memory related device tree
entries on older hardware. of_pmem.ko is written without any arch dependency and
we don't want to add ppc64 specific cpu feature check in of_pmem driver.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200701072235.223558-2-aneesh.kumar@linux.ibm.com
When platform doesn't support GTSE, let TLB invalidation requests
for radix guests be off-loaded to the host using H_RPT_INVALIDATE
hcall.
[hcall wrapper, error path handling and renames]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200703053608.12884-4-bharata@linux.ibm.com
H_REGISTER_PROC_TBL asks for GTSE by default. GTSE flag bit should
be set only when GTSE is supported.
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200703053608.12884-3-bharata@linux.ibm.com
Make GTSE an MMU feature and enable it by default for radix.
However for guest, conditionally enable it if hypervisor supports
it via OV5 vector. Let prom_init ask for radix GTSE only if the
support exists.
Having GTSE as an MMU feature will make it easy to enable radix
without GTSE. Currently radix assumes GTSE is enabled by default.
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200703053608.12884-2-bharata@linux.ibm.com
P9 DD2 NX workbook (Table 4-36) says DMA controller uses CC=5
internally for translation fault handling. NX reserves CC=250 for
OS to notify user space when NX encounters address translation
failure on the request buffer. Not an issue in earlier releases
as NX does not get faults on kernel addresses.
This patch defines CSB_CC_FAULT_ADDRESS(250) and updates CSB.CC with
this proper error code for user space.
Fixes: c96c4436ab ("powerpc/vas: Update CSB and notify process for fault CRBs")
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
[mpe: Added Fixes tag and fix typo in comment]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/019fd53e7538c6f8f332d175df74b1815ef5aa8c.camel@linux.ibm.com
save_general_regs() which does special handling when i == PT_SOFTE.
Rewrite it to minimise the specific part, especially the __put_user()
and associated error handling is the same so make it common.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Use a regular if rather than ternary operator]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/47a38df46cae5a5a88a558a64d71f75e9c4d9950.1594125164.git.christophe.leroy@csgroup.eu
Since commit ("1bd79336a426 powerpc: Fix various
syscall/signal/swapcontext bugs"), getting save_general_regs() called
without FULL_REGS() is very unlikely and generates a warning.
The 32-bit version of save_general_regs() doesn't take care of it
at all and copies all registers anyway since that commit.
Moreover, commit 965dd3ad30 ("powerpc/64/syscall: Remove
non-volatile GPR save optimisation") is another reason why it would
never happen.
So the same with 64-bit, don't worry about FULL_REGS() and copy
all registers all the time.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/173de3b659fa3a5f126a0eb170522cccd909950f.1594125164.git.christophe.leroy@csgroup.eu
Returning from an interrupt or syscall to a signal handler currently
begins execution directly at the handler's entry point, with LR set to
the address of the sigreturn trampoline. When the signal handler
function returns, it runs the trampoline. It looks like this:
# interrupt at user address xyz
# kernel stuff... signal is raised
rfid
# void handler(int sig)
addis 2,12,.TOC.-.LCF0@ha
addi 2,2,.TOC.-.LCF0@l
mflr 0
std 0,16(1)
stdu 1,-96(1)
# handler stuff
ld 0,16(1)
mtlr 0
blr
# __kernel_sigtramp_rt64
addi r1,r1,__SIGNAL_FRAMESIZE
li r0,__NR_rt_sigreturn
sc
# kernel executes rt_sigreturn
rfid
# back to user address xyz
Note the blr with no matching bl. This can corrupt the return
predictor.
Solve this by instead resuming execution at the signal trampoline
which then calls the signal handler. qtrace-tools link_stack checker
confirms the entire user/kernel/vdso cycle is balanced after this
patch, whereas it's not upstream.
Alan confirms the dwarf unwind info still looks good. gdb still
recognises the signal frame and can step into parent frames if it
break inside a signal handler.
Performance is pretty noisy, not a very significant change on a POWER9
here, but branch misses are consistently a lot lower on a
microbenchmark:
Performance counter stats for './signal':
13,085.72 msec task-clock # 1.000 CPUs utilized
45,024,760,101 cycles # 3.441 GHz
65,102,895,542 instructions # 1.45 insn per cycle
11,271,673,787 branches # 861.372 M/sec
59,468,979 branch-misses # 0.53% of all branches
12,989.09 msec task-clock # 1.000 CPUs utilized
44,692,719,559 cycles # 3.441 GHz
65,109,984,964 instructions # 1.46 insn per cycle
11,282,136,057 branches # 868.585 M/sec
39,786,942 branch-misses # 0.35% of all branches
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200511101952.1463138-1-npiggin@gmail.com
The kernel test robot pointed out a slightly different error message
after recent commit 5456ffdee6 ("powerpc/spufs: simplify spufs core
dumping") to spufs for a configuration that never worked:
powerpc64-linux-ld: arch/powerpc/platforms/cell/spufs/file.o: in function `.spufs_proxydma_info_dump':
>> file.c:(.text+0x4c68): undefined reference to `.dump_emit'
powerpc64-linux-ld: arch/powerpc/platforms/cell/spufs/file.o: in function `.spufs_dma_info_dump':
file.c:(.text+0x4d70): undefined reference to `.dump_emit'
powerpc64-linux-ld: arch/powerpc/platforms/cell/spufs/file.o: in function `.spufs_wbox_info_dump':
file.c:(.text+0x4df4): undefined reference to `.dump_emit'
Add a Kconfig dependency to prevent this from happening again.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200706132302.3885935-1-arnd@arndb.de
pnv_ioda_setup_bus_dma() is only used when a passed through PE is
returned to the host. If the kernel is built without IOMMU support
this is dead code. Move it under the #ifdef with the rest of the
IOMMU API support.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200705133557.443607-2-oohall@gmail.com
The kernel test robot noticed these are non-static which causes Clang to
print some warnings. These are called via ppc_md function pointers so
there's no need for them to be non-static.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200705133557.443607-1-oohall@gmail.com
Unlike drivers/base/cacheinfo, powerpc cacheinfo code is not exposing
shared_cpu_list under /sys/devices/system/cpu/cpu<n>/cache/index<m>
Add shared_cpu_list to per cpu per index directory to maintain parity
with x86. Some scripts (example: mmtests
https://github.com/gormanm/mmtests) seem to be looking for
shared_cpu_list instead of shared_cpu_map.
Before this patch:
# ls /sys/devices/system/cpu0/cache/index1
coherency_line_size number_of_sets size ways_of_associativity
level shared_cpu_map type
# cat /sys/devices/system/cpu0/cache/index1/shared_cpu_map
00ff
#
After this patch:
# ls /sys/devices/system/cpu0/cache/index1
coherency_line_size number_of_sets shared_cpu_map type
level shared_cpu_list size ways_of_associativity
# cat /sys/devices/system/cpu0/cache/index1/shared_cpu_map
00ff
# cat /sys/devices/system/cpu0/cache/index1/shared_cpu_list
0-7
#
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200629103703.4538-4-srikar@linux.vnet.ibm.com
In anticipation of implementing shared_cpu_list, move code under
shared_cpu_map_show() to a common function.
No functional changes.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200629103703.4538-3-srikar@linux.vnet.ibm.com
Tejun Heo had modified shared_cpu_map_show() to use scnprintf instead
of cpumap_print during support for *pb[l] format. Refer commit
0c118b7bd0 ("powerpc: use %*pb[l] to print bitmaps including
cpumasks and nodemasks").
cpumap_print_to_pagebuf() is a standard function to print cpumap. With
commit 9cf79d115f ("bitmap: remove explicit newline handling using
scnprintf format string"), there is no need to print explicit newline
and trailing null character. cpumap_print_to_pagebuf() internally uses
scnprintf(). Hence replace scnprintf() with cpumap_print_to_pagebuf().
Note: shared_cpu_map_show() in drivers/base/cacheinfo.c already uses
cpumap_print_to_pagebuf().
Before this patch:
# cat /sys/devices/system/cpu0/cache/index1/shared_cpu_map
00ff
#
(Notice the extra blank line).
After this patch:
# cat /sys/devices/system/cpu0/cache/index1/shared_cpu_map
00ff
#
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200629103703.4538-2-srikar@linux.vnet.ibm.com
I'm seeing RCU warnings when exiting xmon. xmon resets the NMI
watchdog, but does nothing with the RCU stall or soft lockup
watchdogs. Add a helper function that handles all three.
Signed-off-by: Anton Blanchard <anton@ozlabs.org>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200630100218.62a3c3fb@kryten.localdomain
Early secure guest boot hits the below crash while booting with
vcpus numbers aligned with page boundary for PAGE size of 64k
and LPPACA size of 1k i.e 64, 128 etc.
Partition configured for 64 cpus.
CPU maps initialized for 1 thread per core
------------[ cut here ]------------
kernel BUG at arch/powerpc/kernel/paca.c:89!
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
This is due to the BUG_ON() for shared_lppaca_total_size equal to
shared_lppaca_size. Instead the code should only BUG_ON() if we have
exceeded the total_size, which indicates we've overflowed the array.
Fixes: bd104e6db6 ("powerpc/pseries/svm: Use shared memory for LPPACA structures")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
[mpe: Reword change log to clarify we're fixing not removing the check]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200619070113.16696-1-sathnaga@linux.vnet.ibm.com
In order to use <asm/percpu.h> in lockdep.h, we need to make sure
asm/percpu.h does not itself depend on lockdep.
The below seems to make that so and builds powerpc64-defconfig +
PROVE_LOCKING.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
https://lkml.kernel.org/r/20200623083721.336906073@infradead.org
Move x86's 'struct kvm_mmu_memory_cache' to common code in anticipation
of moving the entire x86 implementation code to common KVM and reusing
it for arm64 and MIPS. Add a new architecture specific asm/kvm_types.h
to control the existence and parameters of the struct. The new header
is needed to avoid a chicken-and-egg problem with asm/kvm_host.h as all
architectures define instances of the struct in their vCPU structs.
Add an asm-generic version of kvm_types.h to avoid having empty files on
PPC and s390 in the long term, and for arm64 and mips in the short term.
Suggested-by: Christoffer Dall <christoffer.dall@arm.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200703023545.8771-15-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A typo caused the interrupt handler to branch immediately to the
common "unknown interrupt" handler and skip the special case test for
denormal cause.
This does not affect KVM softpatch handling (e.g., for POWER9 TM
assist) because the KVM test was moved to common code by commit
9600f261ac ("powerpc/64s/exception: Move KVM test to common code")
just before this bug was introduced.
Fixes: 3f7fbd97d0 ("powerpc/64s/exception: Clean up SRR specifiers")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
[mpe: Split selftest into a separate patch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200708074942.1713396-1-npiggin@gmail.com
The method struct pci_error_handlers.error_detected() is defined and
documented as taking an 'enum pci_channel_state' for the second argument,
but most drivers use 'pci_channel_state_t' instead.
This 'pci_channel_state_t' is not a typedef for the enum but a typedef for
a bitwise type in order to have better/stricter typechecking.
Consolidate everything by using 'pci_channel_state_t' in the method's
definition, in the related helpers and in the drivers.
Enforce use of 'pci_channel_state_t' by replacing 'enum pci_channel_state'
with an anonymous 'enum'.
Note: Currently, from a typechecking point of view this patch changes
nothing because only the constants defined by the enum are bitwise, not the
enum itself (sparse doesn't have the notion of 'bitwise enum'). This may
change in some not too far future, hence the patch.
[bhelgaas: squash in
https://lore.kernel.org/r/20200702162651.49526-3-luc.vanoostenryck@gmail.comhttps://lore.kernel.org/r/20200702162651.49526-4-luc.vanoostenryck@gmail.com]
Link: https://lore.kernel.org/r/20200702162651.49526-2-luc.vanoostenryck@gmail.com
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Some Makefiles already pass -fno-stack-protector unconditionally.
For example, arch/arm64/kernel/vdso/Makefile, arch/x86/xen/Makefile.
No problem report so far about hard-coding this option. So, we can
assume all supported compilers know -fno-stack-protector.
GCC 4.8 and Clang support this option (https://godbolt.org/z/_HDGzN)
Get rid of cc-option from -fno-stack-protector.
Remove CONFIG_CC_HAS_STACKPROTECTOR_NONE, which is always 'y'.
Note:
arch/mips/vdso/Makefile adds -fno-stack-protector twice, first
unconditionally, and second conditionally. I removed the second one.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Now that HAVE_COPY_THREAD_TLS has been removed, rename copy_thread_tls()
back simply copy_thread(). It's a simpler name, and doesn't imply that only
tls is copied here. This finishes an outstanding chunk of internal process
creation work since we've added clone3().
Cc: linux-arch@vger.kernel.org
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>A
Acked-by: Stafford Horne <shorne@gmail.com>
Acked-by: Greentime Hu <green.hu@gmail.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>A
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
All architectures support copy_thread_tls() now, so remove the legacy
copy_thread() function and the HAVE_COPY_THREAD_TLS config option. Everyone
uses the same process creation calling convention based on
copy_thread_tls() and struct kernel_clone_args. This will make it easier to
maintain the core process creation code under kernel/, simplifies the
callpaths and makes the identical for all architectures.
Cc: linux-arch@vger.kernel.org
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Greentime Hu <green.hu@gmail.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Currently, most CPUFreq governors are registered at the core_initcall
time when the given governor is the default one, and the module_init
time otherwise.
In preparation for letting users specify the default governor on the
kernel command line, change all of them to be registered at the
core_initcall unconditionally, as it is already the case for the
schedutil and performance governors. This will allow us to assume
that builtin governors have been registered before the built-in
CPUFreq drivers probe.
And since all governors have similar init/exit patterns now, introduce
two new macros, cpufreq_governor_{init,exit}(), to factorize the code.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
With CONFIG_OF_ALL_DTBS=y, as set by eg. allmodconfig, we see lots of
warnings about our dts files, such as:
arch/powerpc/boot/dts/glacier.dts:492.26-532.5:
Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci"
or "pcie"
The node name should not particularly matter, it's just a name, and
AFAICS there's no kernel code that cares whether nodes are *named*
"pciex" or "pcie". So shutup these warnings by converting to the name
dtc wants.
As always there's some risk this could break something obscure that
does rely on the name, in which case we can revert.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200623130320.405852-1-mpe@ellerman.id.au
Clang warns:
arch/powerpc/boot/main.c:107:18: warning: array comparison always
evaluates to a constant [-Wtautological-compare]
if (_initrd_end > _initrd_start) {
^
arch/powerpc/boot/main.c:155:20: warning: array comparison always
evaluates to a constant [-Wtautological-compare]
if (_esm_blob_end <= _esm_blob_start)
^
2 warnings generated.
These are not true arrays, they are linker defined symbols, which are
just addresses. Using the address of operator silences the warning
and does not change the resulting assembly with either clang/ld.lld
or gcc/ld (tested with diff + objdump -Dr).
Reported-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200624035920.835571-1-natechancellor@gmail.com
Jan reported that LTP mmap03 was getting stuck in a page fault loop
after commit c46241a370 ("powerpc/pkeys: Check vma before returning
key fault error to the user"), as well as a minimised reproducer:
#include <fcntl.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/mman.h>
int main(int ac, char **av)
{
int page_sz = getpagesize();
int fildes;
char *addr;
fildes = open("tempfile", O_WRONLY | O_CREAT, 0666);
write(fildes, &fildes, sizeof(fildes));
close(fildes);
fildes = open("tempfile", O_RDONLY);
unlink("tempfile");
addr = mmap(0, page_sz, PROT_EXEC, MAP_FILE | MAP_PRIVATE, fildes, 0);
printf("%d\n", *addr);
return 0;
}
And noticed that access_pkey_error() in page fault handler now always
seem to return false:
__do_page_fault
access_pkey_error(is_pkey: 1, is_exec: 0, is_write: 0)
arch_vma_access_permitted
pkey_access_permitted
if (!is_pkey_enabled(pkey))
return true
return false
pkey_access_permitted() should not check if the pkey is available in
UAMOR (using is_pkey_enabled()). The kernel needs to do that check
only when allocating keys. This also makes sure the execute_only_key
which is marked as non-manageable via UAMOR is handled correctly in
pkey_access_permitted(), and fixes the bug.
Fixes: c46241a370 ("powerpc/pkeys: Check vma before returning key fault error to the user")
Reported-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Include bug report details etc. in the change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200627070147.297535-1-aneesh.kumar@linux.ibm.com
With CONFIG_DEBUG_VIRTUAL=y, __pa() checks for addr value and if it's
less than PAGE_OFFSET it leads to a BUG().
#define __pa(x)
({
VIRTUAL_BUG_ON((unsigned long)(x) < PAGE_OFFSET);
(unsigned long)(x) & 0x0fffffffffffffffUL;
})
kernel BUG at arch/powerpc/kvm/book3s_64_mmu_radix.c:43!
cpu 0x70: Vector: 700 (Program Check) at [c0000018a2187360]
pc: c000000000161b30: __kvmhv_copy_tofrom_guest_radix+0x130/0x1f0
lr: c000000000161d5c: kvmhv_copy_from_guest_radix+0x3c/0x80
...
kvmhv_copy_from_guest_radix+0x3c/0x80
kvmhv_load_from_eaddr+0x48/0xc0
kvmppc_ld+0x98/0x1e0
kvmppc_load_last_inst+0x50/0x90
kvmppc_hv_emulate_mmio+0x288/0x2b0
kvmppc_book3s_radix_page_fault+0xd8/0x2b0
kvmppc_book3s_hv_page_fault+0x37c/0x1050
kvmppc_vcpu_run_hv+0xbb8/0x1080
kvmppc_vcpu_run+0x34/0x50
kvm_arch_vcpu_ioctl_run+0x2fc/0x410
kvm_vcpu_ioctl+0x2b4/0x8f0
ksys_ioctl+0xf4/0x150
sys_ioctl+0x28/0x80
system_call_exception+0x104/0x1d0
system_call_common+0xe8/0x214
kvmhv_copy_tofrom_guest_radix() uses a NULL value for to/from to
indicate direction of copy.
Avoid calling __pa() if the value is NULL to avoid the BUG().
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Massage change log a bit to mention CONFIG_DEBUG_VIRTUAL]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200611120159.680284-1-aneesh.kumar@linux.ibm.com
Building the current 5.8 kernel for an e500 machine with
CONFIG_RANDOMIZE_BASE=y and CONFIG_BLOCK=n yields the following
failure:
arch/powerpc/mm/nohash/kaslr_booke.c: In function 'kaslr_early_init':
arch/powerpc/mm/nohash/kaslr_booke.c:387:2: error: implicit
declaration of function 'flush_icache_range'; did you mean 'flush_tlb_range'?
Indeed, including asm/cacheflush.h into kaslr_booke.c fixes the build.
Fixes: 2b0e86cc5d ("powerpc/fsl_booke/32: implement KASLR infrastructure")
Cc: stable@vger.kernel.org # v5.5+
Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Acked-by: Scott Wood <oss@buserror.net>
[mpe: Tweak change log to mention CONFIG_BLOCK=n]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200613162801.1946619-1-asolokha@kb.kras.ru
Move ptep_get() close to pte_update(), in an ifdef section already
dedicated to powerpc 8xx. This section contains explanation about
the layout of page table entries.
Also modify it to return 4 times the pte value instead of padding
with zeroes.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/9f2df6621fcaf9eba15fadc61c169d0c8e2fb849.1592481938.git.christophe.leroy@csgroup.eu
With hash translation, the hypervisor can hint the LPAR about 16GB contiguous range
via ibm,expected#pages. The kernel marks the range specified in the device tree
as reserved. Avoid doing this when using radix translation. Radix translation
only supports 1G gigantic hugepage and kernel can do the 1G gigantic hugepage
allocation via early memblock reservation. This can be done because with radix
translation pages are not required to be contiguous on the host.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200622064019.16682-1-aneesh.kumar@linux.ibm.com
FIX_EARLY_DEBUG_BASE reserves a 128k area for debuging.
When page size is 256k, the calculation results in a 0 number of
pages, leading to the following failure:
CC arch/powerpc/kernel/asm-offsets.s
In file included from ./arch/powerpc/include/asm/nohash/32/pgtable.h:77:0,
from ./arch/powerpc/include/asm/nohash/pgtable.h:8,
from ./arch/powerpc/include/asm/pgtable.h:20,
from ./include/linux/pgtable.h:6,
from ./arch/powerpc/include/asm/kup.h:42,
from ./arch/powerpc/include/asm/uaccess.h:9,
from ./include/linux/uaccess.h:11,
from ./include/linux/crypto.h:21,
from ./include/crypto/hash.h:11,
from ./include/linux/uio.h:10,
from ./include/linux/socket.h:8,
from ./include/linux/compat.h:15,
from arch/powerpc/kernel/asm-offsets.c:14:
./arch/powerpc/include/asm/fixmap.h:75:2: error: overflow in enumeration values
__end_of_permanent_fixed_addresses,
^
make[2]: *** [arch/powerpc/kernel/asm-offsets.s] Error 1
Ensure the debug area is at least one page.
Fixes: b8e8efaa86 ("powerpc: reserve fixmap entries for early debug")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ca8c9f8249f523b1fab873e67b81b11989d46553.1592207216.git.christophe.leroy@csgroup.eu
The iommu_table_ops::xchg_no_kill() callback updates TCE. It is quite
possible that not entire table is allocated if it is huge and multilevel
so xchg may also allocate subtables. If failed, it returns H_HARDWARE
for failed allocation and H_TOO_HARD if it needs it but cannot do because
the alloc parameter is "false" (set when called with MMU=off to force
retry with MMU=on).
The problem is that having separate errors only matters in real mode
(MMU=off) but the only caller with alloc="false" does not check the exact
error code and simply returns H_TOO_HARD; and for every other mode
alloc is "true". Also, the function is also called from the ioctl()
handler of the VFIO SPAPR TCE IOMMU subdriver which does not expect
hypervisor error codes (H_xxx) and will expose them to the userspace.
This converts wrong error codes to -ENOMEM.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200617003835.48831-1-aik@ozlabs.ru
IS_ENABLED() matches names exactly, so the missing "CONFIG_" prefix
means this code would never be built.
Also fixes a missing newline in pr_warn().
Fixes: 970d54f99c ("powerpc/book3s64/hash: Disable 16M linear mapping size if not aligned")
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/202006050717.A2F9809E@keescook
Since commit cbe46bd4f5 ("powerpc: remove CONFIG_CMDLINE #ifdef mess")
CONFIG_CMDLINE has always had a value regardless of CONFIG_CMDLINE_BOOL.
For example:
$ make ARCH=powerpc defconfig
$ cat .config
# CONFIG_CMDLINE_BOOL is not set
CONFIG_CMDLINE=""
When enabling CONFIG_CMDLINE_BOOL this value is kept making the 'default
"..." if CONFIG_CMDLINE_BOOL' ineffective.
$ ./scripts/config --enable CONFIG_CMDLINE_BOOL
$ cat .config
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE=""
Remove CONFIG_CMDLINE_BOOL and the inaccessible default.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200611224220.25066-2-chris.packham@alliedtelesis.co.nz
blrl is not recommended to use as an indirect function call, as it may
corrupt the link stack predictor.
This is not a performance critical path but this should be fixed for
consistency.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200611121119.1015740-1-npiggin@gmail.com
One fix for the interrupt rework we did last release which broke KVM-PR.
Three commits fixing some fallout from the READ_ONCE() changes interacting badly
with our 8xx 16K pages support, which uses a pte_t that is a structure of 4
actual PTEs.
A cleanup of the 8xx pte_update() to use the newly added pmd_off().
A fix for a crash when handling an oops if CONFIG_DEBUG_VIRTUAL is enabled.
A minor fix for the SPU syscall generation.
Thanks to:
Aneesh Kumar K.V, Christian Zigotzky, Christophe Leroy, Mike Rapoport,
Nicholas Piggin.
-----BEGIN PGP SIGNATURE-----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=qws5
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- One fix for the interrupt rework we did last release which broke
KVM-PR
- Three commits fixing some fallout from the READ_ONCE() changes
interacting badly with our 8xx 16K pages support, which uses a pte_t
that is a structure of 4 actual PTEs
- A cleanup of the 8xx pte_update() to use the newly added pmd_off()
- A fix for a crash when handling an oops if CONFIG_DEBUG_VIRTUAL is
enabled
- A minor fix for the SPU syscall generation
Thanks to Aneesh Kumar K.V, Christian Zigotzky, Christophe Leroy, Mike
Rapoport, Nicholas Piggin.
* tag 'powerpc-5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/8xx: Provide ptep_get() with 16k pages
mm: Allow arches to provide ptep_get()
mm/gup: Use huge_ptep_get() in gup_hugepte()
powerpc/syscalls: Use the number when building SPU syscall table
powerpc/8xx: use pmd_off() to access a PMD entry in pte_update()
powerpc/64s: Fix KVM interrupt using wrong save area
powerpc: Fix kernel crash in show_instructions() w/DEBUG_VIRTUAL
- Fix the visibility of the region 'align' attribute. The new unit tests
for region alignment handling caught a corner case where the alignment
cannot be specified if the region is converted from static to dynamic
provisioning at runtime.
- Add support for device health retrieval for the persistent memory
supported by the papr_scm driver. This includes both the standard
sysfs "health flags" that the nfit persistent memory driver publishes
and a mechanism for the ndctl tool to retrieve a health-command payload.
-----BEGIN PGP SIGNATURE-----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=qVy4
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"A feature (papr_scm health retrieval) and a fix (sysfs attribute
visibility) for v5.8.
Vaibhav explains in the merge commit below why missing v5.8 would be
painful and I agreed to try a -rc2 pull because only cosmetics kept
this out of -rc1 and his initial versions were posted in more than
enough time for v5.8 consideration:
'These patches are tied to specific features that were committed to
customers in upcoming distros releases (RHEL and SLES) whose
time-lines are tied to 5.8 kernel release.
Being able to track the health of an nvdimm is critical for our
customers that are running workloads leveraging papr-scm nvdimms.
Missing the 5.8 kernel would mean missing the distro timelines and
shifting forward the availability of this feature in distro kernels
by at least 6 months'
Summary:
- Fix the visibility of the region 'align' attribute.
The new unit tests for region alignment handling caught a corner
case where the alignment cannot be specified if the region is
converted from static to dynamic provisioning at runtime.
- Add support for device health retrieval for the persistent memory
supported by the papr_scm driver.
This includes both the standard sysfs "health flags" that the nfit
persistent memory driver publishes and a mechanism for the ndctl
tool to retrieve a health-command payload"
* tag 'libnvdimm-for-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nvdimm/region: always show the 'align' attribute
powerpc/papr_scm: Implement support for PAPR_PDSM_HEALTH
ndctl/papr_scm,uapi: Add support for PAPR nvdimm specific methods
powerpc/papr_scm: Improve error logging and handling papr_scm_ndctl()
powerpc/papr_scm: Fetch nvdimm health information from PHYP
seq_buf: Export seq_buf_printf
powerpc: Document details on H_SCM_HEALTH hcall
READ_ONCE() now enforces atomic read, which leads to:
CC mm/gup.o
In file included from ./include/linux/kernel.h:11:0,
from mm/gup.c:2:
In function 'gup_hugepte.constprop',
inlined from 'gup_huge_pd.isra.79' at mm/gup.c:2465:8:
./include/linux/compiler.h:392:38: error: call to '__compiletime_assert_222' declared with attribute error: Unsupported access size for {READ,WRITE}_ONCE().
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
^
./include/linux/compiler.h:373:4: note: in definition of macro '__compiletime_assert'
prefix ## suffix(); \
^
./include/linux/compiler.h:392:2: note: in expansion of macro '_compiletime_assert'
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
^
./include/linux/compiler.h:405:2: note: in expansion of macro 'compiletime_assert'
compiletime_assert(__native_word(t) || sizeof(t) == sizeof(long long), \
^
./include/linux/compiler.h:291:2: note: in expansion of macro 'compiletime_assert_rwonce_type'
compiletime_assert_rwonce_type(x); \
^
mm/gup.c:2428:8: note: in expansion of macro 'READ_ONCE'
pte = READ_ONCE(*ptep);
^
In function 'gup_get_pte',
inlined from 'gup_pte_range' at mm/gup.c:2228:9,
inlined from 'gup_pmd_range' at mm/gup.c:2613:15,
inlined from 'gup_pud_range' at mm/gup.c:2641:15,
inlined from 'gup_p4d_range' at mm/gup.c:2666:15,
inlined from 'gup_pgd_range' at mm/gup.c:2694:15,
inlined from 'internal_get_user_pages_fast' at mm/gup.c:2795:3:
./include/linux/compiler.h:392:38: error: call to '__compiletime_assert_219' declared with attribute error: Unsupported access size for {READ,WRITE}_ONCE().
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
^
./include/linux/compiler.h:373:4: note: in definition of macro '__compiletime_assert'
prefix ## suffix(); \
^
./include/linux/compiler.h:392:2: note: in expansion of macro '_compiletime_assert'
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
^
./include/linux/compiler.h:405:2: note: in expansion of macro 'compiletime_assert'
compiletime_assert(__native_word(t) || sizeof(t) == sizeof(long long), \
^
./include/linux/compiler.h:291:2: note: in expansion of macro 'compiletime_assert_rwonce_type'
compiletime_assert_rwonce_type(x); \
^
mm/gup.c:2199:9: note: in expansion of macro 'READ_ONCE'
return READ_ONCE(*ptep);
^
make[2]: *** [mm/gup.o] Error 1
Define ptep_get() on 8xx when using 16k pages.
Fixes: 9e343b467c ("READ_ONCE: Enforce atomicity for {READ,WRITE}_ONCE() memory accesses")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/341688399c1b102756046d19ea6ce39db1ae4742.1592225558.git.christophe.leroy@csgroup.eu
Now that we've renamed probe_kernel_address() to get_kernel_nofault()
and made it look and behave more in line with get_user(), some of the
subtle type behavior differences end up being more obvious and possibly
dangerous.
When you do
get_user(val, user_ptr);
the type of the access comes from the "user_ptr" part, and the above
basically acts as
val = *user_ptr;
by design (except, of course, for the fact that the actual dereference
is done with a user access).
Note how in the above case, the type of the end result comes from the
pointer argument, and then the value is cast to the type of 'val' as
part of the assignment.
So the type of the pointer is ultimately the more important type both
for the access itself.
But 'get_kernel_nofault()' may now _look_ similar, but it behaves very
differently. When you do
get_kernel_nofault(val, kernel_ptr);
it behaves like
val = *(typeof(val) *)kernel_ptr;
except, of course, for the fact that the actual dereference is done with
exception handling so that a faulting access is suppressed and returned
as the error code.
But note how different the casting behavior of the two superficially
similar accesses are: one does the actual access in the size of the type
the pointer points to, while the other does the access in the size of
the target, and ignores the pointer type entirely.
Actually changing get_kernel_nofault() to act like get_user() is almost
certainly the right thing to do eventually, but in the meantime this
patch adds logit to at least verify that the pointer type is compatible
with the type of the result.
In many cases, this involves just casting the pointer to 'void *' to
make it obvious that the type of the pointer is not the important part.
It's not how 'get_user()' acts, but at least the behavioral difference
is now obvious and explicit.
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Better describe what this helper does, and match the naming of
copy_from_kernel_nofault.
Also switch the argument order around, so that it acts and looks
like get_user().
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently the macro that inserts entries into the SPU syscall table
doesn't actually use the "nr" (syscall number) parameter.
This does work, but it relies on the exact right number of syscall
entries being emitted in order for the syscal numbers to line up with
the array entries. If for example we had two entries with the same
syscall number we wouldn't get an error, it would just cause all
subsequent syscalls to be off by one in the spu_syscall_table.
So instead change the macro to assign to the specific entry of the
array, meaning any numbering overlap will be caught by the compiler.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200616135617.2937252-1-mpe@ellerman.id.au
The pte_update() implementation for PPC_8xx unfolds page table from the PGD
level to access a PMD entry. Since 8xx has only 2-level page table this can
be simplified with pmd_off() shortcut.
Replace explicit unfolding with pmd_off() and drop defines of pgd_index()
and pgd_offset() that are no longer needed.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200615092229.23142-1-rppt@kernel.org
The CTR register reload in the KVM interrupt path used the wrong save
area for SLB (and NMI) interrupts.
Fixes: 9600f261ac ("powerpc/64s/exception: Move KVM test to common code")
Cc: stable@vger.kernel.org # v5.7+
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200615061247.1310763-1-npiggin@gmail.com
This patch implements support for PDSM request 'PAPR_PDSM_HEALTH'
that returns a newly introduced 'struct nd_papr_pdsm_health' instance
containing dimm health information back to user space in response to
ND_CMD_CALL. This functionality is implemented in newly introduced
papr_pdsm_health() that queries the nvdimm health information and
then copies this information to the package payload whose layout is
defined by 'struct nd_papr_pdsm_health'.
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20200615124407.32596-7-vaibhav@linux.ibm.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Introduce support for PAPR NVDIMM Specific Methods (PDSM) in papr_scm
module and add the command family NVDIMM_FAMILY_PAPR to the white list
of NVDIMM command sets. Also advertise support for ND_CMD_CALL for the
nvdimm command mask and implement necessary scaffolding in the module
to handle ND_CMD_CALL ioctl and PDSM requests that we receive.
The layout of the PDSM request as we expect from libnvdimm/libndctl is
described in newly introduced uapi header 'papr_pdsm.h' which
defines a 'struct nd_pkg_pdsm' and a maximal union named
'nd_pdsm_payload'. These new structs together with 'struct nd_cmd_pkg'
for a pdsm envelop thats sent by libndctl to libnvdimm and serviced by
papr_scm in 'papr_scm_service_pdsm()'. The PDSM request is
communicated by member 'struct nd_cmd_pkg.nd_command' together with
other information on the pdsm payload (size-in, size-out).
The patch also introduces 'struct pdsm_cmd_desc' instances of which
are stored in an array __pdsm_cmd_descriptors[] indexed with PDSM cmd
and corresponding access function pdsm_cmd_desc() is
introduced. 'struct pdsm_cdm_desc' holds the service function for a
given PDSM and corresponding payload in/out sizes.
A new function papr_scm_service_pdsm() is introduced and is called from
papr_scm_ndctl() in case of a PDSM request is received via ND_CMD_CALL
command from libnvdimm. The function performs validation on the PDSM
payload based on info present in corresponding PDSM descriptor and if
valid calls the 'struct pdcm_cmd_desc.service' function to service the
PDSM.
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20200615124407.32596-6-vaibhav@linux.ibm.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Since papr_scm_ndctl() can be called from outside papr_scm, its
exposed to the possibility of receiving NULL as value of 'cmd_rc'
argument. This patch updates papr_scm_ndctl() to protect against such
possibility by assigning it pointer to a local variable in case cmd_rc
== NULL.
Finally the patch also updates the 'default' add a debug log unknown
'cmd' values.
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20200615124407.32596-5-vaibhav@linux.ibm.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Implement support for fetching nvdimm health information via
H_SCM_HEALTH hcall as documented in Ref[1]. The hcall returns a pair
of 64-bit bitmap, bitwise-and of which is then stored in
'struct papr_scm_priv' and subsequently partially exposed to
user-space via newly introduced dimm specific attribute
'papr/flags'. Since the hcall is costly, the health information is
cached and only re-queried, 60s after the previous successful hcall.
The patch also adds a documentation text describing flags reported by
the the new sysfs attribute 'papr/flags' is also introduced at
Documentation/ABI/testing/sysfs-bus-papr-pmem.
[1] commit 58b278f568 ("powerpc: Provide initial documentation for
PAPR hcalls")
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20200615124407.32596-4-vaibhav@linux.ibm.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
With CONFIG_DEBUG_VIRTUAL=y, we can hit a BUG() if we take a hard
lockup watchdog interrupt when in OPAL mode.
This happens in show_instructions() if the kernel takes the watchdog
NMI IPI, or any other interrupt, with MSR_IR == 0. show_instructions()
updates the variable pc in the loop and the second iteration will
result in BUG().
We hit the BUG_ON due the below check in __va()
#define __va(x)
({
VIRTUAL_BUG_ON((unsigned long)(x) >= PAGE_OFFSET);
(void *)(unsigned long)((phys_addr_t)(x) | PAGE_OFFSET);
})
Fix it by moving the check out of the loop. Also update nip so that
the nip == pc check still matches.
Fixes: 4dd7554a64 ("powerpc/64: Add VIRTUAL_BUG_ON checks for __va and __pa addresses")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Use IS_ENABLED(), massage change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200524093822.423487-1-aneesh.kumar@linux.ibm.com
- fix build rules in binderfs sample
- fix build errors when Kbuild recurses to the top Makefile
- covert '---help---' in Kconfig to 'help'
-----BEGIN PGP SIGNATURE-----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=1NIT
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- fix build rules in binderfs sample
- fix build errors when Kbuild recurses to the top Makefile
- covert '---help---' in Kconfig to 'help'
* tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
treewide: replace '---help---' in Kconfig files with 'help'
kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables
samples: binderfs: really compile this sample and fix build issues
One fix for a recent change which broke nested KVM guests on Power9.
Thanks to:
Alexey Kardashevskiy.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAl7kr6UTHG1wZUBlbGxl
cm1hbi5pZC5hdQAKCRBR6+o8yOGlgEEFD/92rx5YuDfJswUqcwktR5OqpRh3tnSm
9Xo+QJvBmsV54ca14ctCBrlOmk0SPqQgTaT/rykPZVNh9Saxtjby7DWJOn9UFgW6
Kf3nVOKriAMrq0L1TnzFRvXEHFQSYRV3Bjs7Zo54O2s1oSU2kNy+H8Lhi8HAjLCh
vnJy9wvKfnWGiSHpNIQG3hVzC5cGkjSOij9LLdAugh9BHJkgXS73VOuf+yGN4Cju
VFKximHipsBHwVzDGj8gvAOL3lAiqqCpsHhXNTU8GbQbldsxoHRwIGOWbtH8yLOo
VFW7f+xdZQNkKhZ1Aw/QRahLs5nTubD7lurSFqEiF5a6RLlWtRa9iRZt+SQAtjqQ
ONlUt9LWrkaJAOj0/SkhOp8ko+zMKSiz5Qjq9eTkWCbzpsnIqeY+QeV8b9kuZNs/
hfxWDncMWQmP3StvHWyvDSrroMEsVIPVEhtx6c23NVk90XxzQj54WDOYp3h8BxYp
2Yw5Z7r3n9k7+O8lwOpyVS0oRsmzR1n0zCkb7631+2Y7d+mzaTUuoLu4yWFlb9km
Kmgyao486Jddd1fSyhg2x8uTBqF97LBshZPGmxgG1eRi/aX/6CdRH1RGiPhWjMlN
1PHB85rnqsyLJImev+OEOlWmLg+ICyRLE79f74BsLE9f5DglWLEP+CqAFwW4zXHo
CTdXQnbj2jhHGg==
=5zJH
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
"One fix for a recent change which broke nested KVM guests on Power9.
Thanks to Alexey Kardashevskiy"
* tag 'powerpc-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
KVM: PPC: Fix nested guest RC bits update
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- Loongson port
PPC:
- Fixes
ARM:
- Fixes
x86:
- KVM_SET_USER_MEMORY_REGION optimizations
- Fixes
- Selftest fixes
The guest side of the asynchronous page fault work has been delayed to 5.9
in order to sync with Thomas's interrupt entry rework.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl7icj4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPHGQgAj9+5j+f5v06iMP/+ponWwsVfh+5/
UR1gPbpMSFMKF0U+BCFxsBeGKWPDiz9QXaLfy6UGfOFYBI475Su5SoZ8/i/o6a2V
QjcKIJxBRNs66IG/774pIpONY8/mm/3b6vxmQktyBTqjb6XMGlOwoGZixj/RTp85
+uwSICxMlrijg+fhFMwC4Bo/8SFg+FeBVbwR07my88JaLj+3cV/NPolG900qLSa6
uPqJ289EQ86LrHIHXCEWRKYvwy77GFsmBYjKZH8yXpdzUlSGNexV8eIMAz50figu
wYRJGmHrRqwuzFwEGknv8SA3s2HVggXO4WVkWWCeJyO8nIVfYFUhME5l6Q==
=+Hh0
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more KVM updates from Paolo Bonzini:
"The guest side of the asynchronous page fault work has been delayed to
5.9 in order to sync with Thomas's interrupt entry rework, but here's
the rest of the KVM updates for this merge window.
MIPS:
- Loongson port
PPC:
- Fixes
ARM:
- Fixes
x86:
- KVM_SET_USER_MEMORY_REGION optimizations
- Fixes
- Selftest fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (62 commits)
KVM: x86: do not pass poisoned hva to __kvm_set_memory_region
KVM: selftests: fix sync_with_host() in smm_test
KVM: async_pf: Inject 'page ready' event only if 'page not present' was previously injected
KVM: async_pf: Cleanup kvm_setup_async_pf()
kvm: i8254: remove redundant assignment to pointer s
KVM: x86: respect singlestep when emulating instruction
KVM: selftests: Don't probe KVM_CAP_HYPERV_ENLIGHTENED_VMCS when nested VMX is unsupported
KVM: selftests: do not substitute SVM/VMX check with KVM_CAP_NESTED_STATE check
KVM: nVMX: Consult only the "basic" exit reason when routing nested exit
KVM: arm64: Move hyp_symbol_addr() to kvm_asm.h
KVM: arm64: Synchronize sysreg state on injecting an AArch32 exception
KVM: arm64: Make vcpu_cp1x() work on Big Endian hosts
KVM: arm64: Remove host_cpu_context member from vcpu structure
KVM: arm64: Stop sparse from moaning at __hyp_this_cpu_ptr
KVM: arm64: Handle PtrAuth traps early
KVM: x86: Unexport x86_fpu_cache and make it static
KVM: selftests: Ignore KVM 5-level paging support for VM_MODE_PXXV48_4K
KVM: arm64: Save the host's PtrAuth keys in non-preemptible context
KVM: arm64: Stop save/restoring ACTLR_EL1
KVM: arm64: Add emulation for 32bit guests accessing ACTLR2
...
Before commit 6cdf30375f ("powerpc/kvm/book3s: Use kvm helpers
to walk shadow or secondary table") we called __find_linux_pte() with
a page table pointer from a kvm_nested_guest struct but
now we rely on kvmhv_find_nested() which takes an L1 LPID and returns
a kvm_nested_guest pointer, however we pass a L0 LPID there and
the L2 guest hangs.
This fixes the LPID passed to kvmppc_hv_handle_set_rc().
Fixes: 6cdf30375f ("powerpc/kvm/book3s: Use kvm helpers to walk shadow or secondary table")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200611030559.75257-1-aik@ozlabs.ru
Merge some more updates from Andrew Morton:
- various hotfixes and minor things
- hch's use_mm/unuse_mm clearnups
Subsystems affected by this patch series: mm/hugetlb, scripts, kcov,
lib, nilfs, checkpatch, lib, mm/debug, ocfs2, lib, misc.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
kernel: set USER_DS in kthread_use_mm
kernel: better document the use_mm/unuse_mm API contract
kernel: move use_mm/unuse_mm to kthread.c
kernel: move use_mm/unuse_mm to kthread.c
stacktrace: cleanup inconsistent variable type
lib: test get_count_order/long in test_bitops.c
mm: add comments on pglist_data zones
ocfs2: fix spelling mistake and grammar
mm/debug_vm_pgtable: fix kernel crash by checking for THP support
lib: fix bitmap_parse() on 64-bit big endian archs
checkpatch: correct check for kernel parameters doc
nilfs2: fix null pointer dereference at nilfs_segctor_do_construct()
lib/lz4/lz4_decompress.c: document deliberate use of `&'
kcov: check kcov_softirq in kcov_remote_stop()
scripts/spelling: add a few more typos
khugepaged: selftests: fix timeout condition in wait_for_scan()
Switch the function documentation to kerneldoc comments, and add
WARN_ON_ONCE asserts that the calling thread is a kernel thread and does
not have ->mm set (or has ->mm set in the case of unuse_mm).
Also give the functions a kthread_ prefix to better document the use case.
[hch@lst.de: fix a comment typo, cover the newly merged use_mm/unuse_mm caller in vfio]
Link: http://lkml.kernel.org/r/20200416053158.586887-3-hch@lst.de
[sfr@canb.auug.org.au: powerpc/vas: fix up for {un}use_mm() rename]
Link: http://lkml.kernel.org/r/20200422163935.5aa93ba5@canb.auug.org.au
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [usb]
Acked-by: Haren Myneni <haren@linux.ibm.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Link: http://lkml.kernel.org/r/20200404094101.672954-6-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All architectures define pte_index() as
(address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)
and all architectures define pte_offset_kernel() as an entry in the array
of PTEs indexed by the pte_index().
For the most architectures the pte_offset_kernel() implementation relies
on the availability of pmd_page_vaddr() that converts a PMD entry value to
the virtual address of the page containing PTEs array.
Let's move x86 definitions of the PTE accessors to the generic place in
<linux/pgtable.h> and then simply drop the respective definitions from the
other architectures.
The architectures that didn't provide pmd_page_vaddr() are updated to have
that defined.
The generic implementation of pte_offset_kernel() can be overridden by an
architecture and alpha makes use of this because it has special ordering
requirements for its version of pte_offset_kernel().
[rppt@linux.ibm.com: v2]
Link: http://lkml.kernel.org/r/20200514170327.31389-11-rppt@kernel.org
[rppt@linux.ibm.com: update]
Link: http://lkml.kernel.org/r/20200514170327.31389-12-rppt@kernel.org
[rppt@linux.ibm.com: update]
Link: http://lkml.kernel.org/r/20200514170327.31389-13-rppt@kernel.org
[akpm@linux-foundation.org: fix x86 warning]
[sfr@canb.auug.org.au: fix powerpc build]
Link: http://lkml.kernel.org/r/20200607153443.GB738695@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-10-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The powerpc 32-bit implementation of pgtable has nice shortcuts for
accessing kernel PMD and PTE for a given virtual address. Make these
helpers available for all architectures.
[rppt@linux.ibm.com: microblaze: fix page table traversal in setup_rt_frame()]
Link: http://lkml.kernel.org/r/20200518191511.GD1118872@kernel.org
[akpm@linux-foundation.org: s/pmd_ptr_k/pmd_off_k/ in various powerpc places]
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-9-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include
of the latter in the middle of asm includes. Fix this up with the aid of
the below script and manual adjustments here and there.
import sys
import re
if len(sys.argv) is not 3:
print "USAGE: %s <file> <header>" % (sys.argv[0])
sys.exit(1)
hdr_to_move="#include <linux/%s>" % sys.argv[2]
moved = False
in_hdrs = False
with open(sys.argv[1], "r") as f:
lines = f.readlines()
for _line in lines:
line = _line.rstrip('
')
if line == hdr_to_move:
continue
if line.startswith("#include <linux/"):
in_hdrs = True
elif not moved and in_hdrs:
moved = True
print hdr_to_move
print line
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The include/linux/pgtable.h is going to be the home of generic page table
manipulation functions.
Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and
make the latter include asm/pgtable.h.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm: consolidate definitions of page table accessors", v2.
The low level page table accessors (pXY_index(), pXY_offset()) are
duplicated across all architectures and sometimes more than once. For
instance, we have 31 definition of pgd_offset() for 25 supported
architectures.
Most of these definitions are actually identical and typically it boils
down to, e.g.
static inline unsigned long pmd_index(unsigned long address)
{
return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1);
}
static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
{
return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address);
}
These definitions can be shared among 90% of the arches provided
XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined.
For architectures that really need a custom version there is always
possibility to override the generic version with the usual ifdefs magic.
These patches introduce include/linux/pgtable.h that replaces
include/asm-generic/pgtable.h and add the definitions of the page table
accessors to the new header.
This patch (of 12):
The linux/mm.h header includes <asm/pgtable.h> to allow inlining of the
functions involving page table manipulations, e.g. pte_alloc() and
pmd_alloc(). So, there is no point to explicitly include <asm/pgtable.h>
in the files that include <linux/mm.h>.
The include statements in such cases are remove with a simple loop:
for f in $(git grep -l "include <linux/mm.h>") ; do
sed -i -e '/include <asm\/pgtable.h>/ d' $f
done
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org
Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now the last users of show_stack() got converted to use an explicit log
level, show_stack_loglvl() can drop it's redundant suffix and become once
again well known show_stack().
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200418201944.482088-51-dima@arista.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Introduce show_stack_loglvl(), that eventually will substitute
show_stack().
[1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#u
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Link: http://lkml.kernel.org/r/20200418201944.482088-27-dima@arista.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The function currently known as flush_icache_user_range only operates on
a single page. Rename it to flush_icache_user_page as we'll need the
name flush_icache_user_range for something else soon.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20200515143646.3857579-20-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Power needs almost no cache flushing routines of its own. Rely on
asm-generic/cacheflush.h for the defaults.
Also remove the pointless __KERNEL__ ifdef while we're at it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Link: http://lkml.kernel.org/r/20200515143646.3857579-17-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
flush_icache_user_range is only used by copy_to_user_page, which is only
used by core VM code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Link: http://lkml.kernel.org/r/20200515143646.3857579-4-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
API __get_user_pages_fast() renamed to get_user_pages_fast_only() to
align with pin_user_pages_fast_only().
As part of this we will get rid of write parameter. Instead caller will
pass FOLL_WRITE to get_user_pages_fast_only(). This will not change any
existing functionality of the API.
All the callers are changed to pass FOLL_WRITE.
Also introduce get_user_page_fast_only(), and use it in a few places
that hard-code nr_pages to 1.
Updated the documentation of the API.
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Paul Mackerras <paulus@ozlabs.org> [arch/powerpc/kvm]
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Michal Suchanek <msuchanek@suse.de>
Link: http://lkml.kernel.org/r/1590396812-31277-1-git-send-email-jrdr.linux@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here is the tty and serial driver updates for 5.8-rc1
Nothing huge at all, just a lot of little serial driver fixes, updates
for new devices and features, and other small things. Full details are
in the shortlog.
Note, you will get a conflict merging with your tree in the
Documentation/devicetree/bindings/serial/rs485.yaml file, but it should
be pretty obvious what to do. If not, I'm sure Rob will clean it all up
afterwards :)
All of these have been in linux-next with no issues for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXtzpCg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylRxACgjGtOKPjahONL4lWd0F8ZYEcyw7sAn34woBCO
BDUV3kolrRQ4OYNJWsHP
=TvqG
-----END PGP SIGNATURE-----
Merge tag 'tty-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the tty and serial driver updates for 5.8-rc1
Nothing huge at all, just a lot of little serial driver fixes, updates
for new devices and features, and other small things. Full details are
in the shortlog.
All of these have been in linux-next with no issues for a while"
* tag 'tty-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (67 commits)
tty: serial: qcom_geni_serial: Add 51.2MHz frequency support
tty: serial: imx: clear Ageing Timer Interrupt in handler
serial: 8250_fintek: Add F81966 Support
sc16is7xx: Add flag to activate IrDA mode
dt-bindings: sc16is7xx: Add flag to activate IrDA mode
serial: 8250: Support rs485 bus termination GPIO
serial: 8520_port: Fix function param documentation
dt-bindings: serial: Add binding for rs485 bus termination GPIO
vt: keyboard: avoid signed integer overflow in k_ascii
serial: 8250: Enable 16550A variants by default on non-x86
tty: hvc_console, fix crashes on parallel open/close
serial: imx: Initialize lock for non-registered console
sc16is7xx: Read the LSR register for basic device presence check
sc16is7xx: Allow sharing the IRQ line
sc16is7xx: Use threaded IRQ
sc16is7xx: Always use falling edge IRQ
tty: n_gsm: Fix bogus i++ in gsm_data_kick
tty: n_gsm: Remove unnecessary test in gsm_print_packet()
serial: stm32: add no_console_suspend support
tty: serial: fsl_lpuart: Use __maybe_unused instead of #if CONFIG_PM_SLEEP
...
- Support for userspace to send requests directly to the on-chip GZIP
accelerator on Power9.
- Rework of our lockless page table walking (__find_linux_pte()) to make it
safe against parallel page table manipulations without relying on an IPI for
serialisation.
- A series of fixes & enhancements to make our machine check handling more
robust.
- Lots of plumbing to add support for "prefixed" (64-bit) instructions on
Power10.
- Support for using huge pages for the linear mapping on 8xx (32-bit).
- Remove obsolete Xilinx PPC405/PPC440 support, and an associated sound driver.
- Removal of some obsolete 40x platforms and associated cruft.
- Initial support for booting on Power10.
- Lots of other small features, cleanups & fixes.
Thanks to:
Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan, Andrey Abramov,
Aneesh Kumar K.V, Balamuruhan S, Bharata B Rao, Bulent Abali, Cédric Le
Goater, Chen Zhou, Christian Zigotzky, Christophe JAILLET, Christophe Leroy,
Dmitry Torokhov, Emmanuel Nicolet, Erhard F., Gautham R. Shenoy, Geoff Levand,
George Spelvin, Greg Kurz, Gustavo A. R. Silva, Gustavo Walbon, Haren Myneni,
Hari Bathini, Joel Stanley, Jordan Niethe, Kajol Jain, Kees Cook, Leonardo
Bras, Madhavan Srinivasan., Mahesh Salgaonkar, Markus Elfring, Michael
Neuling, Michal Simek, Nathan Chancellor, Nathan Lynch, Naveen N. Rao,
Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Pingfan Liu, Qian Cai, Ram
Pai, Raphael Moreira Zinsly, Ravi Bangoria, Sam Bobroff, Sandipan Das, Segher
Boessenkool, Stephen Rothwell, Sukadev Bhattiprolu, Tyrel Datwyler, Wolfram
Sang, Xiongfeng Wang.
-----BEGIN PGP SIGNATURE-----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=o0WU
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Support for userspace to send requests directly to the on-chip GZIP
accelerator on Power9.
- Rework of our lockless page table walking (__find_linux_pte()) to
make it safe against parallel page table manipulations without
relying on an IPI for serialisation.
- A series of fixes & enhancements to make our machine check handling
more robust.
- Lots of plumbing to add support for "prefixed" (64-bit) instructions
on Power10.
- Support for using huge pages for the linear mapping on 8xx (32-bit).
- Remove obsolete Xilinx PPC405/PPC440 support, and an associated sound
driver.
- Removal of some obsolete 40x platforms and associated cruft.
- Initial support for booting on Power10.
- Lots of other small features, cleanups & fixes.
Thanks to: Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan,
Andrey Abramov, Aneesh Kumar K.V, Balamuruhan S, Bharata B Rao, Bulent
Abali, Cédric Le Goater, Chen Zhou, Christian Zigotzky, Christophe
JAILLET, Christophe Leroy, Dmitry Torokhov, Emmanuel Nicolet, Erhard F.,
Gautham R. Shenoy, Geoff Levand, George Spelvin, Greg Kurz, Gustavo A.
R. Silva, Gustavo Walbon, Haren Myneni, Hari Bathini, Joel Stanley,
Jordan Niethe, Kajol Jain, Kees Cook, Leonardo Bras, Madhavan
Srinivasan., Mahesh Salgaonkar, Markus Elfring, Michael Neuling, Michal
Simek, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin,
Oliver O'Halloran, Paul Mackerras, Pingfan Liu, Qian Cai, Ram Pai,
Raphael Moreira Zinsly, Ravi Bangoria, Sam Bobroff, Sandipan Das, Segher
Boessenkool, Stephen Rothwell, Sukadev Bhattiprolu, Tyrel Datwyler,
Wolfram Sang, Xiongfeng Wang.
* tag 'powerpc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (299 commits)
powerpc/pseries: Make vio and ibmebus initcalls pseries specific
cxl: Remove dead Kconfig options
powerpc: Add POWER10 architected mode
powerpc/dt_cpu_ftrs: Add MMA feature
powerpc/dt_cpu_ftrs: Enable Prefixed Instructions
powerpc/dt_cpu_ftrs: Advertise support for ISA v3.1 if selected
powerpc: Add support for ISA v3.1
powerpc: Add new HWCAP bits
powerpc/64s: Don't set FSCR bits in INIT_THREAD
powerpc/64s: Save FSCR to init_task.thread.fscr after feature init
powerpc/64s: Don't let DT CPU features set FSCR_DSCR
powerpc/64s: Don't init FSCR_DSCR in __init_FSCR()
powerpc/32s: Fix another build failure with CONFIG_PPC_KUAP_DEBUG
powerpc/module_64: Use special stub for _mcount() with -mprofile-kernel
powerpc/module_64: Simplify check for -mprofile-kernel ftrace relocations
powerpc/module_64: Consolidate ftrace code
powerpc/32: Disable KASAN with pages bigger than 16k
powerpc/uaccess: Don't set KUEP by default on book3s/32
powerpc/uaccess: Don't set KUAP by default on book3s/32
powerpc/8xx: Reduce time spent in allow_user_access() and friends
...
In commit 53cdc1cb29 ("drivers/base/memory.c: indicate all memory blocks
as removable"), the user space interface to compute whether a memory block
can be offlined (exposed via /sys/devices/system/memory/memoryX/removable)
has effectively been deprecated. We want to remove the leftovers of the
kernel implementation.
When offlining a memory block (mm/memory_hotplug.c:__offline_pages()),
we'll start by:
1. Testing if it contains any holes, and reject if so
2. Testing if pages belong to different zones, and reject if so
3. Isolating the page range, checking if it contains any unmovable pages
Using is_mem_section_removable() before trying to offline is not only
racy, it can easily result in false positives/negatives. Let's stop
manually checking is_mem_section_removable(), and let device_offline()
handle it completely instead. We can remove the racy
is_mem_section_removable() implementation next.
We now take more locks (e.g., memory hotplug lock when offlining and the
zone lock when isolating), but maybe we should optimize that
implementation instead if this ever becomes a real problem (after all,
memory unplug is already an expensive operation). We started using
is_mem_section_removable() in commit 51925fb3c5 ("powerpc/pseries:
Implement memory hotplug remove in the kernel"), with the initial
hotremove support of lmbs.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Baoquan He <bhe@redhat.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Link: http://lkml.kernel.org/r/20200407135416.24093-2-david@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Most architectures define kmap_prot to be PAGE_KERNEL.
Let sparc and xtensa define there own and define PAGE_KERNEL as the
default if not overridden.
[akpm@linux-foundation.org: coding style fixes]
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian König <christian.koenig@amd.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20200507150004.1423069-16-ira.weiny@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To support kmap_atomic_prot(), all architectures need to support
protections passed to their kmap_atomic_high() function. Pass protections
into kmap_atomic_high() and change the name to kmap_atomic_high_prot() to
match.
Then define kmap_atomic_prot() as a core function which calls
kmap_atomic_high_prot() when needed.
Finally, redefine kmap_atomic() as a wrapper of kmap_atomic_prot() with
the default kmap_prot exported by the architectures.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian König <christian.koenig@amd.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20200507150004.1423069-11-ira.weiny@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We want to support kmap_atomic_prot() on all architectures and it makes
sense to define kmap_atomic() to use the default kmap_prot.
So we ensure all arch's have a globally available kmap_prot either as a
define or exported symbol.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian König <christian.koenig@amd.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20200507150004.1423069-9-ira.weiny@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Every single architecture (including !CONFIG_HIGHMEM) calls...
pagefault_enable();
preempt_enable();
... before returning from __kunmap_atomic(). Lift this code into the
kunmap_atomic() macro.
While we are at it rename __kunmap_atomic() to kunmap_atomic_high() to
be consistent.
[ira.weiny@intel.com: don't enable pagefault/preempt twice]
Link: http://lkml.kernel.org/r/20200518184843.3029640-1-ira.weiny@intel.com
[akpm@linux-foundation.org: coding style fixes]
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian König <christian.koenig@amd.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guenter Roeck <linux@roeck-us.net>
Link: http://lkml.kernel.org/r/20200507150004.1423069-8-ira.weiny@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Every arch has the same code to ensure atomic operations and a check for
!HIGHMEM page.
Remove the duplicate code by defining a core kmap_atomic() which only
calls the arch specific kmap_atomic_high() when the page is high memory.
[akpm@linux-foundation.org: coding style fixes]
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian König <christian.koenig@amd.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20200507150004.1423069-7-ira.weiny@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
During this kmap() conversion series we must maintain bisect-ability. To
do this, kmap_atomic_prot() in x86, powerpc, and microblaze need to remain
functional.
Create a temporary inline version of kmap_atomic_prot within these
architectures so we can rework their kmap_atomic() calls and then lift
kmap_atomic_prot() to the core.
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian König <christian.koenig@amd.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20200507150004.1423069-6-ira.weiny@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All architectures do exactly the same thing for kunmap(); remove all the
duplicate definitions and lift the call to the core.
This also has the benefit of changing kmap_unmap() on a number of
architectures to be an inline call rather than an actual function.
[akpm@linux-foundation.org: fix CONFIG_HIGHMEM=n build on various architectures]
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian König <christian.koenig@amd.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20200507150004.1423069-5-ira.weiny@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The kmap code for all the architectures is almost 100% identical.
Lift the common code to the core. Use ARCH_HAS_KMAP_FLUSH_TLB to indicate
if an arch defines kmap_flush_tlb() and call if if needed.
This also has the benefit of changing kmap() on a number of architectures
to be an inline call rather than an actual function.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian König <christian.koenig@amd.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20200507150004.1423069-4-ira.weiny@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "Remove duplicated kmap code", v3.
The kmap infrastructure has been copied almost verbatim to every
architecture. This series consolidates obvious duplicated code by
defining core functions which call into the architectures only when
needed.
Some of the k[un]map_atomic() implementations have some similarities but
the similarities were not sufficient to warrant further changes.
In addition we remove a duplicate implementation of kmap() in DRM.
This patch (of 15):
Replace the use of BUG_ON(in_interrupt()) in the kmap() and kunmap() in
favor of might_sleep().
Besides the benefits of might_sleep(), this normalizes the implementations
such that they can be made generic in subsequent patches.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian König <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Link: http://lkml.kernel.org/r/20200507150004.1423069-1-ira.weiny@intel.com
Link: http://lkml.kernel.org/r/20200507150004.1423069-2-ira.weiny@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds tests which will validate architecture page table helpers and
other accessors in their compliance with expected generic MM semantics.
This will help various architectures in validating changes to existing
page table helpers or addition of new ones.
This test covers basic page table entry transformations including but not
limited to old, young, dirty, clean, write, write protect etc at various
level along with populating intermediate entries with next page table page
and validating them.
Test page table pages are allocated from system memory with required size
and alignments. The mapped pfns at page table levels are derived from a
real pfn representing a valid kernel text symbol. This test gets called
via late_initcall().
This test gets built and run when CONFIG_DEBUG_VM_PGTABLE is selected.
Any architecture, which is willing to subscribe this test will need to
select ARCH_HAS_DEBUG_VM_PGTABLE. For now this is limited to arc, arm64,
x86, s390 and powerpc platforms where the test is known to build and run
successfully Going forward, other architectures too can subscribe the test
after fixing any build or runtime problems with their page table helpers.
Folks interested in making sure that a given platform's page table helpers
conform to expected generic MM semantics should enable the above config
which will just trigger this test during boot. Any non conformity here
will be reported as an warning which would need to be fixed. This test
will help catch any changes to the agreed upon semantics expected from
generic MM and enable platforms to accommodate it thereafter.
[anshuman.khandual@arm.com: v17]
Link: http://lkml.kernel.org/r/1587436495-22033-3-git-send-email-anshuman.khandual@arm.com
[anshuman.khandual@arm.com: v18]
Link: http://lkml.kernel.org/r/1588564865-31160-3-git-send-email-anshuman.khandual@arm.com
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390]
Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> [ppc32]
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Link: http://lkml.kernel.org/r/1583919272-24178-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Updates and bug fixes for secure guest support
- Other minor bug fixes and cleanups.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJe1ZJVAAoJEJ2a6ncsY3GfbAkH/Ai18+o6+ZPXIBwr/39sMAHi
cdyJDDYPQgATJ1Aie25um/cCCvGtx5PLQS6gVq8uoKb/zefrOUsEgG45muqGy1aI
3EJXkAl1636f154Q9iZWPAr4ZG+dUiVTp/ACZcw1uAJLnnXrTHZtL4H+tvFplT7m
1sBF6Mepha5B3oJyBDgPDpyfafsrzVeF+SpyywHhHR71DGYcGDwWWRliXxyfSPzh
yrnOuS6LVScjDHfKrdPYptaFiPUfJiPLbVCh/APxx9oXXlnSHQ+MfgrJisL4OSUa
4AQdTJKbEZUlkzf62xwXb2HmtDzyt2qD5A/NTr6cAZDsbdEVRr81mkI3iUim+rM=
=1OTR
-----END PGP SIGNATURE-----
Merge tag 'kvm-ppc-next-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD
PPC KVM update for 5.8
- Updates and bug fixes for secure guest support
- Other minor bug fixes and cleanups.
Merge more updates from Andrew Morton:
"More mm/ work, plenty more to come
Subsystems affected by this patch series: slub, memcg, gup, kasan,
pagealloc, hugetlb, vmscan, tools, mempolicy, memblock, hugetlbfs,
thp, mmap, kconfig"
* akpm: (131 commits)
arm64: mm: use ARCH_HAS_DEBUG_WX instead of arch defined
x86: mm: use ARCH_HAS_DEBUG_WX instead of arch defined
riscv: support DEBUG_WX
mm: add DEBUG_WX support
drivers/base/memory.c: cache memory blocks in xarray to accelerate lookup
mm/thp: rename pmd_mknotpresent() as pmd_mkinvalid()
powerpc/mm: drop platform defined pmd_mknotpresent()
mm: thp: don't need to drain lru cache when splitting and mlocking THP
hugetlbfs: get unmapped area below TASK_UNMAPPED_BASE for hugetlbfs
sparc32: register memory occupied by kernel as memblock.memory
include/linux/memblock.h: fix minor typo and unclear comment
mm, mempolicy: fix up gup usage in lookup_node
tools/vm/page_owner_sort.c: filter out unneeded line
mm: swap: memcg: fix memcg stats for huge pages
mm: swap: fix vmstats for huge pages
mm: vmscan: limit the range of LRU type balancing
mm: vmscan: reclaim writepage is IO cost
mm: vmscan: determine anon/file pressure balance at the reclaim root
mm: balance LRU lists based on relative thrashing
mm: only count actual rotations as LRU reclaim cost
...
Patch series "mm/thp: Rename pmd_mknotpresent() as pmd_mknotvalid()", v2.
This series renames pmd_mknotpresent() as pmd_mknotvalid(). Before that
it drops an existing pmd_mknotpresent() definition from powerpc platform
which was never required as it defines it's pmdp_invalidate() through
subscribing __HAVE_ARCH_PMDP_INVALIDATE. This does not create any
functional change.
This rename was suggested by Catalin during a previous discussion while we
were trying to change the THP helpers on arm64 platform for migration.
https://patchwork.kernel.org/patch/11019637/
This patch (of 2):
Platform needs to define pmd_mknotpresent() for generic pmdp_invalidate()
only when __HAVE_ARCH_PMDP_INVALIDATE is not subscribed. Otherwise
platform specific pmd_mknotpresent() is not required. Hence just drop it.
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1587520326-10099-1-git-send-email-anshuman.khandual@arm.com
Link: http://lkml.kernel.org/r/1584680057-13753-1-git-send-email-anshuman.khandual@arm.com
Link: http://lkml.kernel.org/r/1584680057-13753-2-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are multiple similar definitions for arch_clear_hugepage_flags() on
various platforms. Lets just add it's generic fallback definition for
platforms that do not override. This help reduce code duplication.
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: http://lkml.kernel.org/r/1588907271-11920-4-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are multiple similar definitions for is_hugepage_only_range() on
various platforms. Lets just add it's generic fallback definition for
platforms that do not override. This help reduce code duplication.
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: http://lkml.kernel.org/r/1588907271-11920-3-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
hugetlb_add_hstate() prints a warning if the hstate already exists. This
was originally done as part of kernel command line parsing. If
'hugepagesz=' was specified more than once, the warning
pr_warn("hugepagesz= specified twice, ignoring\n");
would be printed.
Some architectures want to enable all huge page sizes. They would call
hugetlb_add_hstate for all supported sizes. However, this was done after
command line processing and as a result hstates could have already been
created for some sizes. To make sure no warning were printed, there would
often be code like:
if (!size_to_hstate(size)
hugetlb_add_hstate(ilog2(size) - PAGE_SHIFT)
The only time we want to print the warning is as the result of command
line processing. So, remove the warning from hugetlb_add_hstate and add
it to the single arch independent routine processing "hugepagesz=". After
this, calls to size_to_hstate() in arch specific code can be removed and
hugetlb_add_hstate can be called without worrying about warning messages.
[mike.kravetz@oracle.com: fix hugetlb initialization]
Link: http://lkml.kernel.org/r/4c36c6ce-3774-78fa-abc4-b7346bf24348@oracle.com
Link: http://lkml.kernel.org/r/20200428205614.246260-5-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Mina Almasry <almasrymina@google.com>
Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390]
Acked-by: Will Deacon <will@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Longpeng <longpeng2@huawei.com>
Cc: Nitesh Narayan Lal <nitesh@redhat.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Link: http://lkml.kernel.org/r/20200417185049.275845-4-mike.kravetz@oracle.com
Link: http://lkml.kernel.org/r/20200428205614.246260-4-mike.kravetz@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that architectures provide arch_hugetlb_valid_size(), parsing of
"hugepagesz=" can be done in architecture independent code. Create a
single routine to handle hugepagesz= parsing and remove all arch specific
routines. We can also remove the interface hugetlb_bad_size() as this is
no longer used outside arch independent code.
This also provides consistent behavior of hugetlbfs command line options.
The hugepagesz= option should only be specified once for a specific size,
but some architectures allow multiple instances. This appears to be more
of an oversight when code was added by some architectures to set up ALL
huge pages sizes.
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Sandipan Das <sandipan@linux.ibm.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: Mina Almasry <almasrymina@google.com>
Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390]
Acked-by: Will Deacon <will@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Longpeng <longpeng2@huawei.com>
Cc: Nitesh Narayan Lal <nitesh@redhat.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Link: http://lkml.kernel.org/r/20200417185049.275845-3-mike.kravetz@oracle.com
Link: http://lkml.kernel.org/r/20200428205614.246260-3-mike.kravetz@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "Clean up hugetlb boot command line processing", v4.
Longpeng(Mike) reported a weird message from hugetlb command line
processing and proposed a solution [1]. While the proposed patch does
address the specific issue, there are other related issues in command line
processing. As hugetlbfs evolved, updates to command line processing have
been made to meet immediate needs and not necessarily in a coordinated
manner. The result is that some processing is done in arch specific code,
some is done in arch independent code and coordination is problematic.
Semantics can vary between architectures.
The patch series does the following:
- Define arch specific arch_hugetlb_valid_size routine used to validate
passed huge page sizes.
- Move hugepagesz= command line parsing out of arch specific code and into
an arch independent routine.
- Clean up command line processing to follow desired semantics and
document those semantics.
[1] https://lore.kernel.org/linux-mm/20200305033014.1152-1-longpeng2@huawei.com
This patch (of 3):
The architecture independent routine hugetlb_default_setup sets up the
default huge pages size. It has no way to verify if the passed value is
valid, so it accepts it and attempts to validate at a later time. This
requires undocumented cooperation between the arch specific and arch
independent code.
For architectures that support more than one huge page size, provide a
routine arch_hugetlb_valid_size to validate a huge page size.
hugetlb_default_setup can use this to validate passed values.
arch_hugetlb_valid_size will also be used in a subsequent patch to move
processing of the "hugepagesz=" in arch specific code to a common routine
in arch independent code.
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390]
Acked-by: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Longpeng <longpeng2@huawei.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Nitesh Narayan Lal <nitesh@redhat.com>
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Link: http://lkml.kernel.org/r/20200428205614.246260-1-mike.kravetz@oracle.com
Link: http://lkml.kernel.org/r/20200428205614.246260-2-mike.kravetz@oracle.com
Link: http://lkml.kernel.org/r/20200417185049.275845-1-mike.kravetz@oracle.com
Link: http://lkml.kernel.org/r/20200417185049.275845-2-mike.kravetz@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The memmap_init() function was made to iterate over memblock regions and
as the result the early_pfn_in_nid() function became obsolete. Since
CONFIG_NODES_SPAN_OTHER_NODES is only used to pick a stub or a real
implementation of early_pfn_in_nid(), it is also not needed anymore.
Remove both early_pfn_in_nid() and the CONFIG_NODES_SPAN_OTHER_NODES.
Co-developed-by: Hoan Tran <Hoan@os.amperecomputing.com>
Signed-off-by: Hoan Tran <Hoan@os.amperecomputing.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Hoan Tran <hoan@os.amperecomputing.com> [arm64]
Cc: Baoquan He <bhe@redhat.com>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200412194859.12663-17-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
free_area_init() has effectively became a wrapper for
free_area_init_nodes() and there is no point of keeping it. Still
free_area_init() name is shorter and more general as it does not imply
necessity to initialize multiple nodes.
Rename free_area_init_nodes() to free_area_init(), update the callers and
drop old version of free_area_init().
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Hoan Tran <hoan@os.amperecomputing.com> [arm64]
Reviewed-by: Baoquan He <bhe@redhat.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200412194859.12663-6-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
CONFIG_HAVE_MEMBLOCK_NODE_MAP is used to differentiate initialization of
nodes and zones structures between the systems that have region to node
mapping in memblock and those that don't.
Currently all the NUMA architectures enable this option and for the
non-NUMA systems we can presume that all the memory belongs to node 0 and
therefore the compile time configuration option is not required.
The remaining few architectures that use DISCONTIGMEM without NUMA are
easily updated to use memblock_add_node() instead of memblock_add() and
thus have proper correspondence of memblock regions to NUMA nodes.
Still, free_area_init_node() must have a backward compatible version
because its semantics with and without CONFIG_HAVE_MEMBLOCK_NODE_MAP is
different. Once all the architectures will use the new semantics, the
entire compatibility layer can be dropped.
To avoid addition of extra run time memory to store node id for
architectures that keep memblock but have only a single node, the node id
field of the memblock_region is guarded by CONFIG_NEED_MULTIPLE_NODES and
the corresponding accessors presume that in those cases it is always 0.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Hoan Tran <hoan@os.amperecomputing.com> [arm64]
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Cc: Baoquan He <bhe@redhat.com>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200412194859.12663-4-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Move the arch-specific code into arch/arm64/kvm
- Start the post-32bit cleanup
- Cherry-pick a few non-invasive pre-NV patches
x86:
- Rework of TLB flushing
- Rework of event injection, especially with respect to nested virtualization
- Nested AMD event injection facelift, building on the rework of generic code
and fixing a lot of corner cases
- Nested AMD live migration support
- Optimization for TSC deadline MSR writes and IPIs
- Various cleanups
- Asynchronous page fault cleanups (from tglx, common topic branch with tip tree)
- Interrupt-based delivery of asynchronous "page ready" events (host side)
- Hyper-V MSRs and hypercalls for guest debugging
- VMX preemption timer fixes
s390:
- Cleanups
Generic:
- switch vCPU thread wakeup from swait to rcuwait
The other architectures, and the guest side of the asynchronous page fault
work, will come next week.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl7VJcYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPf6QgAq4wU5wdd1lTGz/i3DIhNVJNJgJlp
ozLzRdMaJbdbn5RpAK6PEBd9+pt3+UlojpFB3gpJh2Nazv2OzV4yLQgXXXyyMEx1
5Hg7b4UCJYDrbkCiegNRv7f/4FWDkQ9dx++RZITIbxeskBBCEI+I7GnmZhGWzuC4
7kj4ytuKAySF2OEJu0VQF6u0CvrNYfYbQIRKBXjtOwuRK4Q6L63FGMJpYo159MBQ
asg3B1jB5TcuGZ9zrjL5LkuzaP4qZZHIRs+4kZsH9I6MODHGUxKonrkablfKxyKy
CFK+iaHCuEXXty5K0VmWM3nrTfvpEjVjbMc7e1QGBQ5oXsDM0pqn84syRg==
=v7Wn
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Move the arch-specific code into arch/arm64/kvm
- Start the post-32bit cleanup
- Cherry-pick a few non-invasive pre-NV patches
x86:
- Rework of TLB flushing
- Rework of event injection, especially with respect to nested
virtualization
- Nested AMD event injection facelift, building on the rework of
generic code and fixing a lot of corner cases
- Nested AMD live migration support
- Optimization for TSC deadline MSR writes and IPIs
- Various cleanups
- Asynchronous page fault cleanups (from tglx, common topic branch
with tip tree)
- Interrupt-based delivery of asynchronous "page ready" events (host
side)
- Hyper-V MSRs and hypercalls for guest debugging
- VMX preemption timer fixes
s390:
- Cleanups
Generic:
- switch vCPU thread wakeup from swait to rcuwait
The other architectures, and the guest side of the asynchronous page
fault work, will come next week"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (256 commits)
KVM: selftests: fix rdtsc() for vmx_tsc_adjust_test
KVM: check userspace_addr for all memslots
KVM: selftests: update hyperv_cpuid with SynDBG tests
x86/kvm/hyper-v: Add support for synthetic debugger via hypercalls
x86/kvm/hyper-v: enable hypercalls regardless of hypercall page
x86/kvm/hyper-v: Add support for synthetic debugger interface
x86/hyper-v: Add synthetic debugger definitions
KVM: selftests: VMX preemption timer migration test
KVM: nVMX: Fix VMX preemption timer migration
x86/kvm/hyper-v: Explicitly align hcall param for kvm_hyperv_exit
KVM: x86/pmu: Support full width counting
KVM: x86/pmu: Tweak kvm_pmu_get_msr to pass 'struct msr_data' in
KVM: x86: announce KVM_FEATURE_ASYNC_PF_INT
KVM: x86: acknowledgment mechanism for async pf page ready notifications
KVM: x86: interrupt based APF 'page ready' event delivery
KVM: introduce kvm_read_guest_offset_cached()
KVM: rename kvm_arch_can_inject_async_page_present() to kvm_arch_can_dequeue_async_page_present()
KVM: x86: extend struct kvm_vcpu_pv_apf_data with token info
Revert "KVM: async_pf: Fix #DF due to inject "Page not Present" and "Page Ready" exceptions simultaneously"
KVM: VMX: Replace zero-length array with flexible-array
...
- Optimize the task wakeup CPU selection logic, to improve scalability and
reduce wakeup latency spikes
- PELT enhancements
- CFS bandwidth handling fixes
- Optimize the wakeup path by remove rq->wake_list and replacing it with ->ttwu_pending
- Optimize IPI cross-calls by making flush_smp_call_function_queue()
process sync callbacks first.
- Misc fixes and enhancements.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=C2OP
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2020-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"The changes in this cycle are:
- Optimize the task wakeup CPU selection logic, to improve
scalability and reduce wakeup latency spikes
- PELT enhancements
- CFS bandwidth handling fixes
- Optimize the wakeup path by remove rq->wake_list and replacing it
with ->ttwu_pending
- Optimize IPI cross-calls by making flush_smp_call_function_queue()
process sync callbacks first.
- Misc fixes and enhancements"
* tag 'sched-core-2020-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
irq_work: Define irq_work_single() on !CONFIG_IRQ_WORK too
sched/headers: Split out open-coded prototypes into kernel/sched/smp.h
sched: Replace rq::wake_list
sched: Add rq::ttwu_pending
irq_work, smp: Allow irq_work on call_single_queue
smp: Optimize send_call_function_single_ipi()
smp: Move irq_work_run() out of flush_smp_call_function_queue()
smp: Optimize flush_smp_call_function_queue()
sched: Fix smp_call_function_single_async() usage for ILB
sched/core: Offload wakee task activation if it the wakee is descheduling
sched/core: Optimize ttwu() spinning on p->on_cpu
sched: Defend cfs and rt bandwidth quota against overflow
sched/cpuacct: Fix charge cpuacct.usage_sys
sched/fair: Replace zero-length array with flexible-array
sched/pelt: Sync util/runnable_sum with PELT window when propagating
sched/cpuacct: Use __this_cpu_add() instead of this_cpu_ptr()
sched/fair: Optimize enqueue_task_fair()
sched: Make scheduler_ipi inline
sched: Clean up scheduler_ipi()
sched/core: Simplify sched_init()
...
Merge one more commit from the topic branch we shared with the kvm-ppc
tree.
This brings in a fix to the code that scans for dirty pages during
migration of a VM, which was incorrectly triggering a warning.
-----BEGIN PGP SIGNATURE-----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=H+/Z
-----END PGP SIGNATURE-----
Merge tag 'for-5.8/drivers-2020-06-01' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
"On top of the core changes, here are the block driver changes for this
merge window:
- NVMe changes:
- NVMe over Fibre Channel protocol updates, which also reach
over to drivers/scsi/lpfc (James Smart)
- namespace revalidation support on the target (Anthony
Iliopoulos)
- gcc zero length array fix (Arnd Bergmann)
- nvmet cleanups (Chaitanya Kulkarni)
- misc cleanups and fixes (me, Keith Busch, Sagi Grimberg)
- use a SRQ per completion vector (Max Gurtovoy)
- fix handling of runtime changes to the queue count (Weiping
Zhang)
- t10 protection information support for nvme-rdma and
nvmet-rdma (Israel Rukshin and Max Gurtovoy)
- target side AEN improvements (Chaitanya Kulkarni)
- various fixes and minor improvements all over, icluding the
nvme part of the lpfc driver"
- Floppy code cleanup series (Willy, Denis)
- Floppy contention fix (Jiri)
- Loop CONFIGURE support (Martijn)
- bcache fixes/improvements (Coly, Joe, Colin)
- q->queuedata cleanups (Christoph)
- Get rid of ioctl_by_bdev (Christoph, Stefan)
- md/raid5 allocation fixes (Coly)
- zero length array fixes (Gustavo)
- swim3 task state fix (Xu)"
* tag 'for-5.8/drivers-2020-06-01' of git://git.kernel.dk/linux-block: (166 commits)
bcache: configure the asynchronous registertion to be experimental
bcache: asynchronous devices registration
bcache: fix refcount underflow in bcache_device_free()
bcache: Convert pr_<level> uses to a more typical style
bcache: remove redundant variables i and n
lpfc: Fix return value in __lpfc_nvme_ls_abort
lpfc: fix axchg pointer reference after free and double frees
lpfc: Fix pointer checks and comments in LS receive refactoring
nvme: set dma alignment to qword
nvmet: cleanups the loop in nvmet_async_events_process
nvmet: fix memory leak when removing namespaces and controllers concurrently
nvmet-rdma: add metadata/T10-PI support
nvmet: add metadata support for block devices
nvmet: add metadata/T10-PI support
nvme: add Metadata Capabilities enumerations
nvmet: rename nvmet_check_data_len to nvmet_check_transfer_len
nvmet: rename nvmet_rw_len to nvmet_rw_data_len
nvmet: add metadata characteristics for a namespace
nvme-rdma: add metadata/T10-PI support
nvme-rdma: introduce nvme_rdma_sgl structure
...
Merge updates from Andrew Morton:
"A few little subsystems and a start of a lot of MM patches.
Subsystems affected by this patch series: squashfs, ocfs2, parisc,
vfs. With mm subsystems: slab-generic, slub, debug, pagecache, gup,
swap, memcg, pagemap, memory-failure, vmalloc, kasan"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (128 commits)
kasan: move kasan_report() into report.c
mm/mm_init.c: report kasan-tag information stored in page->flags
ubsan: entirely disable alignment checks under UBSAN_TRAP
kasan: fix clang compilation warning due to stack protector
x86/mm: remove vmalloc faulting
mm: remove vmalloc_sync_(un)mappings()
x86/mm/32: implement arch_sync_kernel_mappings()
x86/mm/64: implement arch_sync_kernel_mappings()
mm/ioremap: track which page-table levels were modified
mm/vmalloc: track which page-table levels were modified
mm: add functions to track page directory modifications
s390: use __vmalloc_node in stack_alloc
powerpc: use __vmalloc_node in alloc_vm_stack
arm64: use __vmalloc_node in arch_alloc_vmap_stack
mm: remove vmalloc_user_node_flags
mm: switch the test_vmalloc module to use __vmalloc_node
mm: remove __vmalloc_node_flags_caller
mm: remove both instances of __vmalloc_node_flags
mm: remove the prot argument to __vmalloc_node
mm: remove the pgprot argument to __vmalloc
...
These helpers are only used for remapping the ISA I/O base. Replace the
mapping side with a remap_isa_range helper in isa-bridge.c that hard codes
all the known arguments, and just remove __iounmap_at in favour of open
coding it in the only caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Kelley <mikelley@microsoft.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200414131348.444715-8-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Factor code shared between pci_64 and electra_cf into a ioremap_pbh helper
that follows the normal ioremap semantics, and returns a useful __iomem
pointer. Note that it opencodes __ioremap_at as we know from the callers
the slab is available. Switch pci_64 to also store the result as __iomem
pointer, and unmap the result using iounmap instead of force casting and
using vmalloc APIs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Kelley <mikelley@microsoft.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200414131348.444715-7-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The vio and ibmebus buses are used for pseries specific
paravirtualised devices and currently they're initialised by the
generic initcall types. This is mostly fine, but it can result in some
nuisance errors in dmesg when booting on PowerNV on some OSes, e.g.
[ 2.984439] synth uevent: /devices/vio: failed to send uevent
[ 2.984442] vio vio: uevent: failed to send synthetic uevent
[ 17.968551] synth uevent: /devices/vio: failed to send uevent
[ 17.968554] vio vio: uevent: failed to send synthetic uevent
We don't see anything similar for the ibmebus because that depends on
!CONFIG_LITTLE_ENDIAN.
This patch squashes those by switching to using machine_*_initcall()
so the bus type is only registered when the kernel is running on a
pseries machine.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200421081539.7485-1-oohall@gmail.com
