Currently eBPF support is available on MIPS64R2 only. Use MIPS64R6
variants of instructions like multiply, divide, movn, movz so eBPF
can run on the newer ISA. Also, we only need to check ISA revision
before JIT'ing code, because we know the CPU is running a 64-bit
kernel because eBPF JIT is only included in kernels with CONFIG_64BIT=y
due to Kconfig dependencies.
Signed-off-by: Hassan Naveed <hnaveed@wavecomp.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: kafai@fb.com
Cc: songliubraving@fb.com
Cc: yhs@fb.com
Cc: netdev@vger.kernel.org
Cc: bpf@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: open list:MIPS <linux-mips@linux-mips.org>
Cc: open list <linux-kernel@vger.kernel.org>
Since the enabling and disabling of IRQs within preempt_schedule_irq()
is contained in a need_resched() loop, we don't need the outer arch
code loop.
Note that commit a18815abcd ("Use preempt_schedule_irq.") initially
removed the existing loop, but missed the final branch to restore_all.
Commit cdaed73afb ("Fix preemption bug.") missed that and reintroduced
the loop.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-kernel@vger.kernel.org
- An interrupt masking fix for Loongson-based Lemote 2F systems (fixing
a regression from v3.19).
- A relocation fix for configurations in which the devicetree is stored
in an ELF section (fixing a regression from v4.7).
- Fix jump labels for MIPSr6 kernels where they previously could
inadvertently place a control transfer instruction in a forbidden slot
& take unexpected exceptions (fixing MIPSr6 support added in v4.0).
- Extend an existing USB power workaround for the Netgear WNDR3400 to v2
boards in addition to the v3 ones that already used it.
- Remove the custom MIPS32 definition of __kernel_fsid_t to make it
consistent with MIPS64 & every other architecture, in particular
resolving issues for code which tries to print the val field whose
type previously differed (though had identical memory layout).
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQRgLjeFAZEXQzy86/s+p5+stXUA3QUCXJARJxUccGF1bC5idXJ0
b25AbWlwcy5jb20ACgkQPqefrLV1AN0qJAEAg6i9PnkuHZFXjlaUsvBWyVJRrpgR
Y9vLYXTGJZdb1BwA/i17C6xD7i41Ef2/TtOuPc5fJ6IfEbt74nKJEeBxNTUO
=V6Ds
-----END PGP SIGNATURE-----
Merge tag 'mips_fixes_5.1_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Paul Burton:
"A small batch of MIPS fixes for 5.1:
- An interrupt masking fix for Loongson-based Lemote 2F systems
(fixing a regression from v3.19)
- A relocation fix for configurations in which the devicetree is
stored in an ELF section (fixing a regression from v4.7)
- Fix jump labels for MIPSr6 kernels where they previously could
inadvertently place a control transfer instruction in a forbidden
slot & take unexpected exceptions (fixing MIPSr6 support added in
v4.0)
- Extend an existing USB power workaround for the Netgear WNDR3400 to
v2 boards in addition to the v3 ones that already used it
- Remove the custom MIPS32 definition of __kernel_fsid_t to make it
consistent with MIPS64 & every other architecture, in particular
resolving issues for code which tries to print the val field whose
type previously differed (though had identical memory layout)"
* tag 'mips_fixes_5.1_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Remove custom MIPS32 __kernel_fsid_t type
mips: bcm47xx: Enable USB power on Netgear WNDR3400v2
MIPS: Fix kernel crash for R6 in jump label branch function
MIPS: Ensure ELF appended dtb is relocated
mips: loongson64: lemote-2f: Add IRQF_NO_SUSPEND to "cascade" irqaction.
Currently, every arch/*/include/uapi/asm/Kbuild explicitly includes
the common Kbuild.asm file. Factor out the duplicated include directives
to scripts/Makefile.asm-generic so that no architecture would opt out
of the mandatory-y mechanism.
um is not forced to include mandatory-y since it is a very exceptional
case which does not support UAPI.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
for 32-bit guests
s390: interrupt cleanup, introduction of the Guest Information Block,
preparation for processor subfunctions in cpu models
PPC: bug fixes and improvements, especially related to machine checks
and protection keys
x86: many, many cleanups, including removing a bunch of MMU code for
unnecessary optimizations; plus AVIC fixes.
Generic: memcg accounting
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJci+7XAAoJEL/70l94x66DUMkIAKvEefhceySHYiTpfefjLjIC
16RewgHa+9CO4Oo5iXiWd90fKxtXLXmxDQOS4VGzN0rxvLGRw/fyXIxL1MDOkaAO
l8SLSNuewY4XBUgISL3PMz123r18DAGOuy9mEcYU/IMesYD2F+wy5lJ17HIGq6X2
RpoF1p3qO1jfkPTKOob6Ixd4H5beJNPKpdth7LY3PJaVhDxgouj32fxnLnATVSnN
gENQ10fnt8BCjshRYW6Z2/9bF15JCkUFR1xdBW2/xh1oj+kvPqqqk2bEN1eVQzUy
2hT/XkwtpthqjSbX8NNavWRSFnOnbMLTRKQyIXmFVsM5VoSrwtiGsCFzBgcT++I=
=XIzU
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"ARM:
- some cleanups
- direct physical timer assignment
- cache sanitization for 32-bit guests
s390:
- interrupt cleanup
- introduction of the Guest Information Block
- preparation for processor subfunctions in cpu models
PPC:
- bug fixes and improvements, especially related to machine checks
and protection keys
x86:
- many, many cleanups, including removing a bunch of MMU code for
unnecessary optimizations
- AVIC fixes
Generic:
- memcg accounting"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (147 commits)
kvm: vmx: fix formatting of a comment
KVM: doc: Document the life cycle of a VM and its resources
MAINTAINERS: Add KVM selftests to existing KVM entry
Revert "KVM/MMU: Flush tlb directly in the kvm_zap_gfn_range()"
KVM: PPC: Book3S: Add count cache flush parameters to kvmppc_get_cpu_char()
KVM: PPC: Fix compilation when KVM is not enabled
KVM: Minor cleanups for kvm_main.c
KVM: s390: add debug logging for cpu model subfunctions
KVM: s390: implement subfunction processor calls
arm64: KVM: Fix architecturally invalid reset value for FPEXC32_EL2
KVM: arm/arm64: Remove unused timer variable
KVM: PPC: Book3S: Improve KVM reference counting
KVM: PPC: Book3S HV: Fix build failure without IOMMU support
Revert "KVM: Eliminate extra function calls in kvm_get_dirty_log_protect()"
x86: kvmguest: use TSC clocksource if invariant TSC is exposed
KVM: Never start grow vCPU halt_poll_ns from value below halt_poll_ns_grow_start
KVM: Expose the initial start value in grow_halt_poll_ns() as a module parameter
KVM: grow_halt_poll_ns() should never shrink vCPU halt_poll_ns
KVM: x86/mmu: Consolidate kvm_mmu_zap_all() and kvm_mmu_zap_mmio_sptes()
KVM: x86/mmu: WARN if zapping a MMIO spte results in zapping children
...
For MIPS32 kernels we have a custom definition of __kernel_fsid_t. This
differs from the asm-generic version used by all other architectures &
MIPS64 in one way - it declares the val field as an array of long,
rather than an array of int. Since int & long have identical size &
alignment when targeting MIPS32 anyway, this makes little sense.
Beyond the pointlessness this causes problems for code which prints
entries from the val array, for example the fanotify_encode_fid()
function [1]. If such code uses a format specified suited to an int then
it encounters compiler warnings when building for MIPS32, such as:
In file included from include/linux/kernel.h:14:0,
from include/linux/list.h:9,
from include/linux/preempt.h:11,
from include/linux/spinlock.h:51,
from include/linux/fdtable.h:11,
from fs/notify/fanotify/fanotify.c:3:
fs/notify/fanotify/fanotify.c: In function 'fanotify_encode_fid':
include/linux/kern_levels.h:5:18: warning: format '%x' expects argument
of type 'unsigned int', but argument 2 has type 'long int' [-Wformat=]
Remove the custom __kernel_fsid_t definition & make use of the
asm-generic version which will have an identical layout in memory
anyway, in order to remove the inconsistency with other architectures.
One possible regression this could cause if is any code is attempting to
print entries from the val array with a long-sized format specifier, in
which case it would begin seeing compiler warnings when built against
kernel headers including this change. Since such code is exceedingly
rare, and would have to be MIPS32-specific to expect a long, this seems
to be a problem that it's extremely unlikely anyone will encounter.
[1] https://lore.kernel.org/linux-mips/CAOQ4uxiEkczB7PNCXegFC-eYb9zAGaio_o=OgHAJHFd7eavBxA@mail.gmail.com/T/#mb43103277c79ef06b884359209e817db1c136140
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jan Kara <jack@suse.cz>
Cc: linux-arch@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Pull networking fixes from David Miller:
"More fixes in the queue:
1) Netfilter nat can erroneously register the device notifier twice,
fix from Florian Westphal.
2) Use after free in nf_tables, from Pablo Neira Ayuso.
3) Parallel update of steering rule fix in mlx5 river, from Eli
Britstein.
4) RX processing panic in lan743x, fix from Bryan Whitehead.
5) Use before initialization of TCP_SKB_CB, fix from Christoph Paasch.
6) Fix locking in SRIOV mode of mlx4 driver, from Jack Morgenstein.
7) Fix TX stalls in lan743x due to mishandling of interrupt ACKing
modes, from Bryan Whitehead.
8) Fix infoleak in l2tp_ip6_recvmsg(), from Eric Dumazet"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits)
pptp: dst_release sk_dst_cache in pptp_sock_destruct
MAINTAINERS: GENET & SYSTEMPORT: Add internal Broadcom list
l2tp: fix infoleak in l2tp_ip6_recvmsg()
net/tls: Inform user space about send buffer availability
net_sched: return correct value for *notify* functions
lan743x: Fix TX Stall Issue
net/mlx4_core: Fix qp mtt size calculation
net/mlx4_core: Fix locking in SRIOV mode when switching between events and polling
net/mlx4_core: Fix reset flow when in command polling mode
mlxsw: minimal: Initialize base_mac
mlxsw: core: Prevent duplication during QSFP module initialization
net: dwmac-sun8i: fix a missing check of of_get_phy_mode
net: sh_eth: fix a missing check of of_get_phy_mode
net: 8390: fix potential NULL pointer dereferences
net: fujitsu: fix a potential NULL pointer dereference
net: qlogic: fix a potential NULL pointer dereference
isdn: hfcpci: fix potential NULL pointer dereference
Documentation: devicetree: add a new optional property for port mac address
net: rocker: fix a potential NULL pointer dereference
net: qlge: fix a potential NULL pointer dereference
...
Add check for the return value of memblock_alloc*() functions and call
panic() in case of error. The panic message repeats the one used by
panicing memblock allocators with adjustment of parameters to include
only relevant ones.
The replacement was mostly automated with semantic patches like the one
below with manual massaging of format strings.
@@
expression ptr, size, align;
@@
ptr = memblock_alloc(size, align);
+ if (!ptr)
+ panic("%s: Failed to allocate %lu bytes align=0x%lx\n", __func__, size, align);
[anders.roxell@linaro.org: use '%pa' with 'phys_addr_t' type]
Link: http://lkml.kernel.org/r/20190131161046.21886-1-anders.roxell@linaro.org
[rppt@linux.ibm.com: fix format strings for panics after memblock_alloc]
Link: http://lkml.kernel.org/r/1548950940-15145-1-git-send-email-rppt@linux.ibm.com
[rppt@linux.ibm.com: don't panic if the allocation in sparse_buffer_init fails]
Link: http://lkml.kernel.org/r/20190131074018.GD28876@rapoport-lnx
[akpm@linux-foundation.org: fix xtensa printk warning]
Link: http://lkml.kernel.org/r/1548057848-15136-20-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Guo Ren <ren_guo@c-sky.com> [c-sky]
Acked-by: Paul Burton <paul.burton@mips.com> [MIPS]
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> [s390]
Reviewed-by: Juergen Gross <jgross@suse.com> [Xen]
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa]
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Christoph Hellwig <hch@lst.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The last parameter of memblock_alloc_from() is the lower limit for the
memory allocation. When it is 0, the call is equivalent to
memblock_alloc().
Link: http://lkml.kernel.org/r/1548057848-15136-13-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Paul Burton <paul.burton@mips.com> # MIPS part
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Christoph Hellwig <hch@lst.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Guo Ren <ren_guo@c-sky.com> [c-sky]
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Juergen Gross <jgross@suse.com> [Xen]
Cc: Mark Salter <msalter@redhat.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric has reported on OpenWrt's bug tracking system[1], that he's not
able to use USB devices on his WNDR3400v2 device after the boot, until
he turns on GPIO #21 manually through sysfs.
1. https://bugs.openwrt.org/index.php?do=details&task_id=2170
Cc: Rafał Miłecki <zajec5@gmail.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Reported-by: Eric Bohlman <ericbohlman@gmail.com>
Tested-by: Eric Bohlman <ericbohlman@gmail.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Insert Branch instruction instead of NOP to make sure assembler don't
patch code in forbidden slot. In jump label function, it might
be possible to patch Control Transfer Instructions(CTIs) into
forbidden slot, which will generate Reserved Instruction exception
in MIPS release 6.
Signed-off-by: Archer Yan <ayan@wavecomp.com>
Reviewed-by: Paul Burton <paul.burton@mips.com>
[paul.burton@mips.com:
- Add MIPS prefix to subject.
- Mark for stable from v4.0, which introduced r6 support, onwards.]
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: stable@vger.kernel.org # v4.0+
This fixes booting with the combination of CONFIG_RELOCATABLE=y
and CONFIG_MIPS_ELF_APPENDED_DTB=y.
Sections that appear after the relocation table are not relocated
on system boot (except .bss, which has special handling).
With CONFIG_MIPS_ELF_APPENDED_DTB, the dtb is part of the
vmlinux ELF, so it must be relocated together with everything else.
Fixes: 069fd76627 ("MIPS: Reserve space for relocation table")
Signed-off-by: Yasha Cherikovsky <yasha.che3@gmail.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # v4.7+
Timekeeping IRQs from CS5536 MFGPT are routed to i8259, which then
triggers the "cascade" IRQ on MIPS CPU. Without IRQF_NO_SUSPEND in
cascade_irqaction, MFGPT interrupts will be masked in suspend mode,
and the machine would be unable to resume once suspended.
Previously, MIPS IRQs were not disabled properly, so the original
code appeared to work. Commit a3e6c1eff5 ("MIPS: IRQ: Fix disable_irq on
CPU IRQs") uncovers the bug. To fix it, add IRQF_NO_SUSPEND to
cascade_irqaction.
This commit is functionally identical to 0add9c2f1c ("MIPS:
Loongson-3: Add IRQF_NO_SUSPEND to Cascade irqaction"), but it forgot
to apply the same fix to Loongson2.
Signed-off-by: Yifeng Li <tomli@tomli.me>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # v3.19+
Referencing the __kernel_long_t type caused some user space applications
to stop compiling when they had not already included linux/posix_types.h,
e.g.
s/multicast.c -o ext/sockets/multicast.lo
In file included from /builddir/build/BUILD/php-7.3.3/main/php.h:468,
from /builddir/build/BUILD/php-7.3.3/ext/sockets/sockets.c:27:
/builddir/build/BUILD/php-7.3.3/ext/sockets/sockets.c: In function 'zm_startup_sockets':
/builddir/build/BUILD/php-7.3.3/ext/sockets/sockets.c:776:40: error: '__kernel_long_t' undeclared (first use in this function)
776 | REGISTER_LONG_CONSTANT("SO_SNDTIMEO", SO_SNDTIMEO, CONST_CS | CONST_PERSISTENT);
It is safe to include that header here, since it only contains kernel
internal types that do not conflict with other user space types.
It's still possible that some related build failures remain, but those
are likely to be for code that is not already y2038 safe.
Reported-by: Laura Abbott <labbott@redhat.com>
Fixes: a9beb86ae6 ("sock: Add SO_RCVTIMEO_NEW and SO_SNDTIMEO_NEW")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
- do not generate unneeded top-level built-in.a
- let git ignore O= directory entirely
- optimize scripts/kallsyms slightly
- exclude DWARF info from *.s regardless of config options
- fix GCC toolchain search path for Clang to prepare ld.lld support
- do not generate modules.order when CONFIG_MODULES is disabled
- simplify single target rules and remove VPATH for external module build
- allow to add optional flags to dpkg-buildpackage when building deb-pkg
- move some compiler option tests from Makefile to Kconfig
- various Makefile cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=y9YG
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- do not generate unneeded top-level built-in.a
- let git ignore O= directory entirely
- optimize scripts/kallsyms slightly
- exclude DWARF info from *.s regardless of config options
- fix GCC toolchain search path for Clang to prepare ld.lld support
- do not generate modules.order when CONFIG_MODULES is disabled
- simplify single target rules and remove VPATH for external module
build
- allow to add optional flags to dpkg-buildpackage when building
deb-pkg
- move some compiler option tests from Makefile to Kconfig
- various Makefile cleanups
* tag 'kbuild-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (40 commits)
kbuild: remove scripts/basic/% build target
kbuild: use -Werror=implicit-... instead of -Werror-implicit-...
kbuild: clean up scripts/gcc-version.sh
kbuild: remove cc-version macro
kbuild: update comment block of scripts/clang-version.sh
kbuild: remove commented-out INITRD_COMPRESS
kbuild: move -gsplit-dwarf, -gdwarf-4 option tests to Kconfig
kbuild: [bin]deb-pkg: add DPKG_FLAGS variable
kbuild: move ".config not found!" message from Kconfig to Makefile
kbuild: invoke syncconfig if include/config/auto.conf.cmd is missing
kbuild: simplify single target rules
kbuild: remove empty rules for makefiles
kbuild: make -r/-R effective in top Makefile for old Make versions
kbuild: move tools_silent to a more relevant place
kbuild: compute false-positive -Wmaybe-uninitialized cases in Kconfig
kbuild: refactor cc-cross-prefix implementation
kbuild: hardcode genksyms path and remove GENKSYMS variable
scripts/gdb: refactor rules for symlink creation
kbuild: create symlink to vmlinux-gdb.py in scripts_gdb target
scripts/gdb: do not descend into scripts/gdb from scripts
...
- add debugfs support for dumping dma-debug information (Corentin Labbe)
- Kconfig cleanups (Andy Shevchenko and me)
- debugfs cleanups (Greg Kroah-Hartman)
- improve dma_map_resource and use it in the media code
- arch_setup_dma_ops / arch_teardown_dma_ops cleanups
- various small cleanups and improvements for the per-device coherent
allocator
- make the DMA mask an upper bound and don't fail "too large" dma mask
in the remaning two architectures - this will allow big driver
cleanups in the following merge windows
-----BEGIN PGP SIGNATURE-----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=nAMI
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.1' of git://git.infradead.org/users/hch/dma-mapping
Pull DMA mapping updates from Christoph Hellwig:
- add debugfs support for dumping dma-debug information (Corentin
Labbe)
- Kconfig cleanups (Andy Shevchenko and me)
- debugfs cleanups (Greg Kroah-Hartman)
- improve dma_map_resource and use it in the media code
- arch_setup_dma_ops / arch_teardown_dma_ops cleanups
- various small cleanups and improvements for the per-device coherent
allocator
- make the DMA mask an upper bound and don't fail "too large" dma mask
in the remaning two architectures - this will allow big driver
cleanups in the following merge windows
* tag 'dma-mapping-5.1' of git://git.infradead.org/users/hch/dma-mapping: (21 commits)
Documentation/DMA-API-HOWTO: update dma_mask sections
sparc64/pci_sun4v: allow large DMA masks
sparc64/iommu: allow large DMA masks
sparc64: refactor the ali DMA quirk
ccio: allow large DMA masks
dma-mapping: remove the DMA_MEMORY_EXCLUSIVE flag
dma-mapping: remove dma_mark_declared_memory_occupied
dma-mapping: move CONFIG_DMA_CMA to kernel/dma/Kconfig
dma-mapping: improve selection of dma_declare_coherent availability
dma-mapping: remove an incorrect __iommem annotation
of: select OF_RESERVED_MEM automatically
device.h: dma_mem is only needed for HAVE_GENERIC_DMA_COHERENT
mfd/sm501: depend on HAS_DMA
dma-mapping: add a kconfig symbol for arch_teardown_dma_ops availability
dma-mapping: add a kconfig symbol for arch_setup_dma_ops availability
dma-mapping: move debug configuration options to kernel/dma
dma-debug: add dumping facility via debugfs
dma: debug: no need to check return value of debugfs_create functions
videobuf2: replace a layering violation with dma_map_resource
dma-mapping: don't BUG when calling dma_map_resource on RAM
...
First: Ted, Jaegeuk, and I have decided to add me as a co-maintainer for
fscrypt, and we're now using a shared git tree. So we've updated
MAINTAINERS accordingly, and I'm doing the pull request this time.
The actual changes for v5.1 are:
- Remove the fs-specific kconfig options like CONFIG_EXT4_ENCRYPTION and
make fscrypt support for all fscrypt-capable filesystems be controlled
by CONFIG_FS_ENCRYPTION, similar to how CONFIG_QUOTA works.
- Improve error code for rename() and link() into encrypted directories.
- Various cleanups.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCXH2YDRQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK+SAAQCWYOTwYko8uE8Ze8i2fiUm0vr91NOg
zj5DGmK7Izxy/gEAsNDOVA7zWrDg/f5600/7aLpDQQTGHA38YVsgiyd7DgY=
=S3tT
-----END PGP SIGNATURE-----
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt
Pull fscrypt updates from Eric Biggers:
"First: Ted, Jaegeuk, and I have decided to add me as a co-maintainer
for fscrypt, and we're now using a shared git tree. So we've updated
MAINTAINERS accordingly, and I'm doing the pull request this time.
The actual changes for v5.1 are:
- Remove the fs-specific kconfig options like CONFIG_EXT4_ENCRYPTION
and make fscrypt support for all fscrypt-capable filesystems be
controlled by CONFIG_FS_ENCRYPTION, similar to how CONFIG_QUOTA
works.
- Improve error code for rename() and link() into encrypted
directories.
- Various cleanups"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
MAINTAINERS: add Eric Biggers as an fscrypt maintainer
fscrypt: return -EXDEV for incompatible rename or link into encrypted dir
fscrypt: remove filesystem specific build config option
f2fs: use IS_ENCRYPTED() to check encryption status
ext4: use IS_ENCRYPTED() to check encryption status
fscrypt: remove CRYPTO_CTR dependency
Only a few small changes this time:
- Michael S. Tsirkin cleans up linux/mman.h
- Mike Rapoport found a typo
I had originally merged another cleanup series for I/O accessors from
Hugo Lefeuvre as well, but dropped it after the discussion of the barrier
semantics and some conflicts. I expect this series to get merged for a
later release though.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=C9p7
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"Only a few small changes this time:
- Michael S. Tsirkin cleans up linux/mman.h
- Mike Rapoport found a typo
I had originally merged another cleanup series for I/O accessors from
Hugo Lefeuvre as well, but dropped it after the discussion of the
barrier semantics and some conflicts. I expect this series to get
merged for a later release though"
* tag 'asm-generic-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic/page.h: fix typo in #error text requiring a real asm/page.h
arch: move common mmap flags to linux/mman.h
drm: tweak header name
x86/mpx: tweak header name
Pull year 2038 updates from Thomas Gleixner:
"Another round of changes to make the kernel ready for 2038. After lots
of preparatory work this is the first set of syscalls which are 2038
safe:
403 clock_gettime64
404 clock_settime64
405 clock_adjtime64
406 clock_getres_time64
407 clock_nanosleep_time64
408 timer_gettime64
409 timer_settime64
410 timerfd_gettime64
411 timerfd_settime64
412 utimensat_time64
413 pselect6_time64
414 ppoll_time64
416 io_pgetevents_time64
417 recvmmsg_time64
418 mq_timedsend_time64
419 mq_timedreceiv_time64
420 semtimedop_time64
421 rt_sigtimedwait_time64
422 futex_time64
423 sched_rr_get_interval_time64
The syscall numbers are identical all over the architectures"
* 'timers-2038-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
riscv: Use latest system call ABI
checksyscalls: fix up mq_timedreceive and stat exceptions
unicore32: Fix __ARCH_WANT_STAT64 definition
asm-generic: Make time32 syscall numbers optional
asm-generic: Drop getrlimit and setrlimit syscalls from default list
32-bit userspace ABI: introduce ARCH_32BIT_OFF_T config option
compat ABI: use non-compat openat and open_by_handle_at variants
y2038: add 64-bit time_t syscalls to all 32-bit architectures
y2038: rename old time and utime syscalls
y2038: remove struct definition redirects
y2038: use time32 syscall names on 32-bit
syscalls: remove obsolete __IGNORE_ macros
y2038: syscalls: rename y2038 compat syscalls
x86/x32: use time64 versions of sigtimedwait and recvmmsg
timex: change syscalls to use struct __kernel_timex
timex: use __kernel_timex internally
sparc64: add custom adjtimex/clock_adjtime functions
time: fix sys_timer_settime prototype
time: Add struct __kernel_timex
time: make adjtime compat handling available for 32 bit
...
- Support for the MIPSr6 MemoryMapID register & Global INValidate TLB
(GINVT) instructions, allowing for more efficient TLB maintenance when
running on a CPU such as the I6500 that supports these.
- Enable huge page support for MIPS64r6.
- Optimize post-DMA cache sync by removing that code entirely for kernel
configurations in which we know it won't be needed.
- The number of pages allocated for interrupt stacks is now calculated
correctly, where before we would wastefully allocate too much memory
in some configurations.
- The ath79 platform migrates to devicetree.
- The bcm47xx platform sees fixes for the Buffalo WHR-G54S board.
- The ingenic/jz4740 platform gains support for appended devicetrees.
- The cavium_octeon, lantiq, loongson32 & sgi-ip27 platforms all see
cleanups as do various pieces of core architecture code.
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQRgLjeFAZEXQzy86/s+p5+stXUA3QUCXH3BQxUccGF1bC5idXJ0
b25AbWlwcy5jb20ACgkQPqefrLV1AN1+4wD+Oh4JTfZN/NEOQMlrSkXxjEHqjX3u
1Y6CiiPCs+q2UnYBANb+ic+ZH5MnvJxxmcvlYI2q3rIh4b8TDriip4KMUTUP
=Sw9X
-----END PGP SIGNATURE-----
Merge tag 'mips_5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Paul Burton:
- Support for the MIPSr6 MemoryMapID register & Global INValidate TLB
(GINVT) instructions, allowing for more efficient TLB maintenance
when running on a CPU such as the I6500 that supports these.
- Enable huge page support for MIPS64r6.
- Optimize post-DMA cache sync by removing that code entirely for
kernel configurations in which we know it won't be needed.
- The number of pages allocated for interrupt stacks is now calculated
correctly, where before we would wastefully allocate too much memory
in some configurations.
- The ath79 platform migrates to devicetree.
- The bcm47xx platform sees fixes for the Buffalo WHR-G54S board.
- The ingenic/jz4740 platform gains support for appended devicetrees.
- The cavium_octeon, lantiq, loongson32 & sgi-ip27 platforms all see
cleanups as do various pieces of core architecture code.
* tag 'mips_5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (66 commits)
MIPS: lantiq: Remove separate GPHY Firmware loader
MIPS: ingenic: Add support for appended devicetree
MIPS: SGI-IP27: rework HUB interrupts
MIPS: SGI-IP27: do boot CPU init later
MIPS: SGI-IP27: do xtalk scanning later
MIPS: SGI-IP27: use pr_info/pr_emerg and pr_cont to fix output
MIPS: SGI-IP27: clean up bridge access and header files
MIPS: SGI-IP27: get rid of volatile and hubreg_t
MIPS: irq: Allocate accurate order pages for irq stack
MIPS: dma-noncoherent: Remove bogus condition in dma_sync_phys()
MIPS: eBPF: Remove REG_32BIT_ZERO_EX
MIPS: eBPF: Always return sign extended 32b values
MIPS: CM: Fix indentation
MIPS: BCM47XX: Fix/improve Buffalo WHR-G54S support
MIPS: OCTEON: program rx/tx-delay always from DT
MIPS: OCTEON: delete board-specific link status
MIPS: OCTEON: don't lie about interface type of CN3005 board
MIPS: OCTEON: warn if deprecated link status is being used
MIPS: OCTEON: add fixed-link nodes to in-kernel device tree
MIPS: Delete unused flush_cache_sigtramp()
...
Pull networking updates from David Miller:
"Here we go, another merge window full of networking and #ebpf changes:
1) Snoop DHCPACKS in batman-adv to learn MAC/IP pairs in the DHCP
range without dealing with floods of ARP traffic, from Linus
Lüssing.
2) Throttle buffered multicast packet transmission in mt76, from
Felix Fietkau.
3) Support adaptive interrupt moderation in ice, from Brett Creeley.
4) A lot of struct_size conversions, from Gustavo A. R. Silva.
5) Add peek/push/pop commands to bpftool, as well as bash completion,
from Stanislav Fomichev.
6) Optimize sk_msg_clone(), from Vakul Garg.
7) Add SO_BINDTOIFINDEX, from David Herrmann.
8) Be more conservative with local resends due to local congestion,
from Yuchung Cheng.
9) Allow vetoing of unsupported VXLAN FDBs, from Petr Machata.
10) Add health buffer support to devlink, from Eran Ben Elisha.
11) Add TXQ scheduling API to mac80211, from Toke Høiland-Jørgensen.
12) Add statistics to basic packet scheduler filter, from Cong Wang.
13) Add GRE tunnel support for mlxsw Spectrum-2, from Nir Dotan.
14) Lots of new IP tunneling forwarding tests, also from Nir Dotan.
15) Add 3ad stats to bonding, from Nikolay Aleksandrov.
16) Lots of probing improvements for bpftool, from Quentin Monnet.
17) Various nfp drive #ebpf JIT improvements from Jakub Kicinski.
18) Allow #ebpf programs to access gso_segs from skb shared info, from
Eric Dumazet.
19) Add sock_diag support for AF_XDP sockets, from Björn Töpel.
20) Support 22260 iwlwifi devices, from Luca Coelho.
21) Use rbtree for ipv6 defragmentation, from Peter Oskolkov.
22) Add JMP32 instruction class support to #ebpf, from Jiong Wang.
23) Add spinlock support to #ebpf, from Alexei Starovoitov.
24) Support 256-bit keys and TLS 1.3 in ktls, from Dave Watson.
25) Add device infomation API to devlink, from Jakub Kicinski.
26) Add new timestamping socket options which are y2038 safe, from
Deepa Dinamani.
27) Add RX checksum offloading for various sh_eth chips, from Sergei
Shtylyov.
28) Flow offload infrastructure, from Pablo Neira Ayuso.
29) Numerous cleanups, improvements, and bug fixes to the PHY layer
and many drivers from Heiner Kallweit.
30) Lots of changes to try and make packet scheduler classifiers run
lockless as much as possible, from Vlad Buslov.
31) Support BCM957504 chip in bnxt_en driver, from Erik Burrows.
32) Add concurrency tests to tc-tests infrastructure, from Vlad
Buslov.
33) Add hwmon support to aquantia, from Heiner Kallweit.
34) Allow 64-bit values for SO_MAX_PACING_RATE, from Eric Dumazet.
And I would be remiss if I didn't thank the various major networking
subsystem maintainers for integrating much of this work before I even
saw it. Alexei Starovoitov, Daniel Borkmann, Pablo Neira Ayuso,
Johannes Berg, Kalle Valo, and many others. Thank you!"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2207 commits)
net/sched: avoid unused-label warning
net: ignore sysctl_devconf_inherit_init_net without SYSCTL
phy: mdio-mux: fix Kconfig dependencies
net: phy: use phy_modify_mmd_changed in genphy_c45_an_config_aneg
net: dsa: mv88e6xxx: add call to mv88e6xxx_ports_cmode_init to probe for new DSA framework
selftest/net: Remove duplicate header
sky2: Disable MSI on Dell Inspiron 1545 and Gateway P-79
net/mlx5e: Update tx reporter status in case channels were successfully opened
devlink: Add support for direct reporter health state update
devlink: Update reporter state to error even if recover aborted
sctp: call iov_iter_revert() after sending ABORT
team: Free BPF filter when unregistering netdev
ip6mr: Do not call __IP6_INC_STATS() from preemptible context
isdn: mISDN: Fix potential NULL pointer dereference of kzalloc
net: dsa: mv88e6xxx: support in-band signalling on SGMII ports with external PHYs
cxgb4/chtls: Prefix adapter flags with CXGB4
net-sysfs: Switch to bitmap_zalloc()
mellanox: Switch to bitmap_zalloc()
bpf: add test cases for non-pointer sanitiation logic
mlxsw: i2c: Extend initialization by querying resources data
...
A fairly quiet release for SPI, the biggest thing is the conversion to
use GPIO descriptors which is now 90% done but still needs some
stragglers converting.
- Support for inter-word delays.
- Conversion of the core and most drivers to use GPIO descriptors for
GPIO controlled chip selects.
- New drivers for NXP FlexSPI and QuadSPI, SiFive and Spreadtrum.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlx9WtETHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0DfrB/92O47HJfHg1xIgOp4BLzT8lA5zQEsy
a8ApcLVLvY6mSfbB/G7RosfoPwTc1eZP5Q2BqzQOBIO+507ao4AcASARmkTwjwkC
eRUJ/THkGyGurs8POtnc5YJlHsT1t743QpqlUNekt+NqognlkPccgc5bNgixfuPD
eVSwVC85SKP3gCpAjVb6FFFmlWr8AKdlgx+41h9QpMNG/85H6xgo4C4Wlajt42/E
wNx+WXzlPyzB5Lc3IGPeF/I/Hu/Ta3hUZLTVpWi5ubM8p4SYGmMZ9l8sURPCz1pK
UMZFpJxx8DWwkj2F/FkoLasfiRqUHIP9K7NfKF0u2xdNbhEk1GA3NAG0
=ctKG
-----END PGP SIGNATURE-----
Merge tag 'spi-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"A fairly quiet release for SPI, the biggest thing is the conversion to
use GPIO descriptors which is now 90% done but still needs some
stragglers converting.
Summary:
- Support for inter-word delays
- Conversion of the core and most drivers to use GPIO descriptors for
GPIO controlled chip selects
- New drivers for NXP FlexSPI and QuadSPI, SiFive and Spreadtrum"
* tag 'spi-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (104 commits)
spi: sh-msiof: Restrict bits per word to 8/16/24/32 on R-Car Gen2/3
spi: sifive: Remove redundant dev_err call in sifive_spi_probe()
spi: sifive: Remove spi_master_put in sifive_spi_remove()
spi: spi-gpio: fix SPI_CS_HIGH capability
spi: pxa2xx: Setup maximum supported DMA transfer length
spi: sifive: Add driver for the SiFive SPI controller
spi: sifive: Add DT documentation for SiFive SPI controller
spi: sprd: Add a prefix for SPI DMA channel macros
spi: sprd: spi: sprd: Add DMA mode support
dt-bindings: spi: Add the DMA properties for the SPI dma mode
spi: sprd: Add the SPI irq function for the SPI DMA mode
dt-bindings: spi: imx: Add an entry for the i.MX8QM compatible
spi: use gpio[d]_set_value_cansleep for setting chipselect GPIO
spi: gpio: Advertise support for SPI_CS_HIGH
spi: sh-msiof: Replace spi_master by spi_controller
spi: sh-hspi: Replace spi_master by spi_controller
spi: rspi: Replace spi_master by spi_controller
spi: atmel-quadspi: add support for sam9x60 qspi controller
dt-bindings: spi: atmel-quadspi: QuadSPI driver for Microchip SAM9X60
spi: atmel-quadspi: add support for named peripheral clock
...
Every in-kernel use of this function defined it to KERNEL_DS (either as
an actual define, or as an inline function). It's an entirely
historical artifact, and long long long ago used to actually read the
segment selector valueof '%ds' on x86.
Which in the kernel is always KERNEL_DS.
Inspired by a patch from Jann Horn that just did this for a very small
subset of users (the ones in fs/), along with Al who suggested a script.
I then just took it to the logical extreme and removed all the remaining
gunk.
Roughly scripted with
git grep -l '(get_ds())' -- :^tools/ | xargs sed -i 's/(get_ds())/(KERNEL_DS)/'
git grep -lw 'get_ds' -- :^tools/ | xargs sed -i '/^#define get_ds()/d'
plus manual fixups to remove a few unusual usage patterns, the couple of
inline function cases and to fix up a comment that had become stale.
The 'get_ds()' function remains in an x86 kvm selftest, since in user
space it actually does something relevant.
Inspired-by: Jann Horn <jannh@google.com>
Inspired-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull networking fixes from David Miller:
1) Fix refcount leak in act_ipt during replace, from Davide Caratti.
2) Set task state properly in tun during blocking reads, from Timur
Celik.
3) Leaked reference in DSA, from Wen Yang.
4) NULL deref in act_tunnel_key, from Vlad Buslov.
5) cipso_v4_erro can reference the skb IPCB in inappropriate contexts
thus referencing garbage, from Nazarov Sergey.
6) Don't accept RTA_VIA and RTA_GATEWAY in contexts where those
attributes make no sense.
7) Fix hung sendto in tipc, from Tung Nguyen.
8) Out-of-bounds access in netlabel, from Paul Moore.
9) Grant reference leak in xen-netback, from Igor Druzhinin.
10) Fix tx stalls with lan743x, from Bryan Whitehead.
11) Fix interrupt storm with mv88e6xxx, from Hein Kallweit.
12) Memory leak in sit on device registry failure, from Mao Wenan.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits)
net: sit: fix memory leak in sit_init_net()
net: dsa: mv88e6xxx: Fix statistics on mv88e6161
geneve: correctly handle ipv6.disable module parameter
net: dsa: mv88e6xxx: prevent interrupt storm caused by mv88e6390x_port_set_cmode
bpf: fix sanitation rewrite in case of non-pointers
ipv4: Add ICMPv6 support when parse route ipproto
MIPS: eBPF: Fix icache flush end address
lan743x: Fix TX Stall Issue
net: phy: phylink: fix uninitialized variable in phylink_get_mac_state
net: aquantia: regression on cpus with high cores: set mode with 8 queues
selftests: fixes for UDP GRO
bpf: drop refcount if bpf_map_new_fd() fails in map_create()
net: dsa: mv88e6xxx: power serdes on/off for 10G interfaces on 6390X
net: dsa: mv88e6xxx: Fix u64 statistics
xen-netback: don't populate the hash cache on XenBus disconnect
xen-netback: fix occasional leak of grant ref mappings under memory pressure
sctp: chunk.c: correct format string for size_t in printk
net: netem: fix skb length BUG_ON in __skb_to_sgvec
netlabel: fix out-of-bounds memory accesses
ipv4: Pass original device to ip_rcv_finish_core
...
The MIPS eBPF JIT calls flush_icache_range() in order to ensure the
icache observes the code that we just wrote. Unfortunately it gets the
end address calculation wrong due to some bad pointer arithmetic.
The struct jit_ctx target field is of type pointer to u32, and as such
adding one to it will increment the address being pointed to by 4 bytes.
Therefore in order to find the address of the end of the code we simply
need to add the number of 4 byte instructions emitted, but we mistakenly
add the number of instructions multiplied by 4. This results in the call
to flush_icache_range() operating on a memory region 4x larger than
intended, which is always wasteful and can cause crashes if we overrun
into an unmapped page.
Fix this by correcting the pointer arithmetic to remove the bogus
multiplication, and use braces to remove the need for a set of brackets
whilst also making it obvious that the target field is a pointer.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: b6bd53f9c4 ("MIPS: Add missing file for eBPF JIT.")
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: netdev@vger.kernel.org
Cc: bpf@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: stable@vger.kernel.org # v4.13+
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
- Fix 16b cmpxchg() operations which could erroneously fail if bits 15:8
of the old value are non-zero. In practice I'm not aware of any actual
users of 16b cmpxchg() on MIPS, but this fixes the support for it was
was introduced in v4.13.
- Provide a struct device to dma_alloc_coherent for Lantiq XWAY systems
with a "Voice MIPS Macro Core" (VMMC) device.
- Provide DMA masks for BCM63xx ethernet devices, fixing a regression
introduced in v4.19.
- Fix memblock reservation for the kernel when the system has a non-zero
PHYS_OFFSET, correcting the memblock conversion performed in v4.20.
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQRgLjeFAZEXQzy86/s+p5+stXUA3QUCXHhqjBUccGF1bC5idXJ0
b25AbWlwcy5jb20ACgkQPqefrLV1AN3ZaAD/SFgi3dS9bSWhDhiy83llLaWiCGPb
i09uzo3rpWoKSwQBAIwLEfmaHz/sYdliKRlE13uaxYWzwaN+VHXIPjlzbYMB
=cDlO
-----END PGP SIGNATURE-----
Merge tag 'mips_fixes_5.0_4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Paul Burton:
"A few more MIPS fixes:
- Fix 16b cmpxchg() operations which could erroneously fail if bits
15:8 of the old value are non-zero. In practice I'm not aware of
any actual users of 16b cmpxchg() on MIPS, but this fixes the
support for it was was introduced in v4.13.
- Provide a struct device to dma_alloc_coherent for Lantiq XWAY
systems with a "Voice MIPS Macro Core" (VMMC) device.
- Provide DMA masks for BCM63xx ethernet devices, fixing a regression
introduced in v4.19.
- Fix memblock reservation for the kernel when the system has a
non-zero PHYS_OFFSET, correcting the memblock conversion performed
in v4.20"
* tag 'mips_fixes_5.0_4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: fix memory setup for platforms with PHYS_OFFSET != 0
MIPS: BCM63XX: provide DMA masks for ethernet devices
MIPS: lantiq: pass struct device to DMA API functions
MIPS: fix truncation in __cmpxchg_small for short values
For platforms, which use a PHYS_OFFSET != 0, symbol _end also
contains that offset. So when calling memblock_reserve() for
reserving kernel the size argument needs to be adjusted.
Fixes: bcec54bf31 ("mips: switch to NO_BOOTMEM")
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org # v4.20+
This is a follow-up to the y2038 syscall patches already merged in the tip
tree. As the final 32-bit RISC-V syscall ABI is still being decided on,
this is the last chance to make a few corrections to leave out interfaces
based on 32-bit time_t along with the old off_t and rlimit types.
The series achieves this in a few steps:
- A couple of bug fixes for minor regressions I introduced
in the original series
- A couple of older patches from Yury Norov that I had never
merged in the past, these fix up the openat/open_by_handle_at and
getrlimit/setrlimit syscalls to disallow the old versions of off_t
and rlimit.
- Hiding the deprecated system calls behind an #ifdef in
include/uapi/asm-generic/unistd.h
- Change arch/riscv to drop all these ABIs.
Originally, the plan was to also leave these out on C-Sky, but that now
has a glibc port that uses the older interfaces, so we need to leave
them in place.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=/iFA
-----END PGP SIGNATURE-----
Merge tag 'y2038-syscall-abi' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground into timers/2038
Pull additional syscall ABI cleanup for y2038 from Arnd Bergmann:
This is a follow-up to the y2038 syscall patches already merged in the tip
tree. As the final 32-bit RISC-V syscall ABI is still being decided on,
this is the last chance to make a few corrections to leave out interfaces
based on 32-bit time_t along with the old off_t and rlimit types.
The series achieves this in a few steps:
- A couple of bug fixes for minor regressions I introduced
in the original series
- A couple of older patches from Yury Norov that I had never
merged in the past, these fix up the openat/open_by_handle_at and
getrlimit/setrlimit syscalls to disallow the old versions of off_t
and rlimit.
- Hiding the deprecated system calls behind an #ifdef in
include/uapi/asm-generic/unistd.h
- Change arch/riscv to drop all these ABIs.
Originally, the plan was to also leave these out on C-Sky, but that now
has a glibc port that uses the older interfaces, so we need to leave
them in place.
The separate GPHY Firmware loader driver is not used any more, the GPHY
firmware is now loaded by the GSWIP switch driver which also makes use
of the GPHY.
Remove the old unused GPHY firmware loader driver.
The GPHY firmware is useless without an Ethernet and switch driver, it
should not harm if loading this does not work for system using an old
device tree.
I am not aware of any vendor separating the device tree from the kernel
binary, it should be ok to remove this.
The code and the functionality form this separate GPHY firmware loader
was added to the gswip driver in commit 14fceff477 ("net: dsa: Add
Lantiq / Intel DSA driver for vrx200")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: john@phrozen.org
Cc: netdev@vger.kernel.org
Add support for booting the kernel from an externally-appended
devicetree, if no devicetree was built-in.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
kvm_arch_memslots_updated() is at this point in time an x86-specific
hook for handling MMIO generation wraparound. x86 stashes 19 bits of
the memslots generation number in its MMIO sptes in order to avoid
full page fault walks for repeat faults on emulated MMIO addresses.
Because only 19 bits are used, wrapping the MMIO generation number is
possible, if unlikely. kvm_arch_memslots_updated() alerts x86 that
the generation has changed so that it can invalidate all MMIO sptes in
case the effective MMIO generation has wrapped so as to avoid using a
stale spte, e.g. a (very) old spte that was created with generation==0.
Given that the purpose of kvm_arch_memslots_updated() is to prevent
consuming stale entries, it needs to be called before the new generation
is propagated to memslots. Invalidating the MMIO sptes after updating
memslots means that there is a window where a vCPU could dereference
the new memslots generation, e.g. 0, and incorrectly reuse an old MMIO
spte that was created with (pre-wrap) generation==0.
Fixes: e59dbe09f8 ("KVM: Introduce kvm_arch_memslots_updated()")
Cc: <stable@vger.kernel.org>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This API is primarily used through DT entries, but two architectures
and two drivers call it directly. So instead of selecting the config
symbol for random architectures pull it in implicitly for the actual
users. Also rename the Kconfig option to describe the feature better.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Paul Burton <paul.burton@mips.com> # MIPS
Acked-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit rearranges the HUB interrupt code by using MIPS_IRQ_CPU
interrupt handling code and modern Linux IRQ framework features to get
rid of global arrays. It also adds support for irq affinity setting.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
To make use of per_cpu variables in interrupt code per_cpu_init() must
be done after setup_per_cpu_areas(). This is achieved by calling it
in smp_prepare_boot_cpu() via a new smp_ops method.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Move xtalk scanning to a later boot stage to be able using things like
kmalloc and friends.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Topology and NMI output needs pr_cont() to look the way it was in the
old days of printk.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Introduced bridge_read/bridge_write/bridge_set/bridge_clr for accessing
bridge register and get rid of volatile declarations. Also removed
all typedefs from arch/mips/include/asm/pci/bridge.h and cleaned up
language in arch/mips/pci/ops-bridge.c
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Replace hub register access with __raw_readq/__raw_writeq and get
rid of hubreg_t completely. Also remove no longer (probably never
used) used defines
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
The irq_pages is the number of pages for irq stack, but not the
order which is needed by __get_free_pages().
We can use get_order() to calculate the accurate order.
Signed-off-by: Liu Xiang <liu.xiang6@zte.com.cn>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: fe8bd18ffe ("MIPS: Introduce irq_stack")
Cc: linux-mips@vger.kernel.org
Cc: stable@vger.kernel.org # v4.11+
Commit e36863a550 ("MIPS: HIGHMEM DMA on noncoherent MIPS32
processors") introduced code which:
1) Calculates an offset within a page, by ANDing an address
with ~PAGE_MASK.
2) Checks whether that offset is >= PAGE_SIZE.
This check can never evaluate true, making the code it guards
unreachable. smatch spots bogus arithmetic resulting from the
impossible condition, resulting in the following warning:
arch/mips/mm/dma-noncoherent.c:125
dma_sync_phys() warn: mask and shift to zero
Fix this by removing the impossible to satisfy condition & the
unreachable code it guards.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Robin Murphy <robin.murphy@arm.com>
REG_32BIT_ZERO_EX and REG_64BIT are always handled in exactly the same
way, and reg_val_propagate_range() never actually sets any register to
type REG_32BIT_ZERO_EX.
Remove the redundant & unused REG_32BIT_ZERO_EX.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Jiong Wang <jiong.wang@netronome.com>
The function prototype used to call JITed eBPF code (ie. the type of the
struct bpf_prog bpf_func field) returns an unsigned int. The MIPS n64
ABI that MIPS64 kernels target defines that 32 bit integers should
always be sign extended when passed in registers as either arguments or
return values.
This means that when returning any value which may not already be sign
extended (ie. of type REG_64BIT or REG_32BIT_ZERO_EX) we need to perform
that sign extension in order to comply with the n64 ABI. Without this we
see strange looking test failures from test_bpf.ko, such as:
test_bpf: #65 ALU64_MOV_X:
dst = 4294967295 jited:1 ret -1 != -1 FAIL (1 times)
Although the return value printed matches the expected value, this is
only because printf is only examining the least significant 32 bits of
the 64 bit register value we returned. The register holding the expected
value is sign extended whilst the v0 register was set to a zero extended
value by our JITed code, so when compared by a conditional branch
instruction the values are not equal.
We already handle this when the return value register is of type
REG_32BIT_ZERO_EX, so simply extend this to also cover REG_64BIT.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: b6bd53f9c4 ("MIPS: Add missing file for eBPF JIT.")
Cc: stable@vger.kernel.org # v4.13+
Cc: linux-mips@vger.kernel.org
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Jiong Wang <jiong.wang@netronome.com>
All new 32-bit architectures should have 64-bit userspace off_t type, but
existing architectures has 32-bit ones.
To enforce the rule, new config option is added to arch/Kconfig that defaults
ARCH_32BIT_OFF_T to be disabled for new 32-bit architectures. All existing
32-bit architectures enable it explicitly.
New option affects force_o_largefile() behaviour. Namely, if userspace
off_t is 64-bits long, we have no reason to reject user to open big files.
Note that even if architectures has only 64-bit off_t in the kernel
(arc, c6x, h8300, hexagon, nios2, openrisc, and unicore32),
a libc may use 32-bit off_t, and therefore want to limit the file size
to 4GB unless specified differently in the open flags.
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Yury Norov <ynorov@marvell.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Now that we have 3 mmap flags shared by all architectures,
let's move them into the common header.
This will help discourage future architectures from duplicating code.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Alexei Starovoitov says:
====================
pull-request: bpf 2019-02-16
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) fix lockdep false positive in bpf_get_stackid(), from Alexei.
2) several AF_XDP fixes, from Bjorn, Magnus, Davidlohr.
3) fix narrow load from struct bpf_sock, from Martin.
4) mips JIT fixes, from Paul.
5) gso handling fix in bpf helpers, from Willem.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
REG_32BIT_ZERO_EX and REG_64BIT are always handled in exactly the same
way, and reg_val_propagate_range() never actually sets any register to
type REG_32BIT_ZERO_EX.
Remove the redundant & unused REG_32BIT_ZERO_EX.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The function prototype used to call JITed eBPF code (ie. the type of the
struct bpf_prog bpf_func field) returns an unsigned int. The MIPS n64
ABI that MIPS64 kernels target defines that 32 bit integers should
always be sign extended when passed in registers as either arguments or
return values.
This means that when returning any value which may not already be sign
extended (ie. of type REG_64BIT or REG_32BIT_ZERO_EX) we need to perform
that sign extension in order to comply with the n64 ABI. Without this we
see strange looking test failures from test_bpf.ko, such as:
test_bpf: #65 ALU64_MOV_X:
dst = 4294967295 jited:1 ret -1 != -1 FAIL (1 times)
Although the return value printed matches the expected value, this is
only because printf is only examining the least significant 32 bits of
the 64 bit register value we returned. The register holding the expected
value is sign extended whilst the v0 register was set to a zero extended
value by our JITed code, so when compared by a conditional branch
instruction the values are not equal.
We already handle this when the return value register is of type
REG_32BIT_ZERO_EX, so simply extend this to also cover REG_64BIT.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: b6bd53f9c4 ("MIPS: Add missing file for eBPF JIT.")
Cc: stable@vger.kernel.org # v4.13+
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
mips_cm_error_report() contains a function call that's incorrectly
indented a level further than it ought to be. Remove a tab from the
start of both affected lines.
Signed-off-by: Paul Burton <paul.burton@mips.com>
The netfilter conflicts were rather simple overlapping
changes.
However, the cls_tcindex.c stuff was a bit more complex.
On the 'net' side, Cong is fixing several races and memory
leaks. Whilst on the 'net-next' side we have Vlad adding
the rtnl-ness support.
What I've decided to do, in order to resolve this, is revert the
conversion over to using a workqueue that Cong did, bringing us back
to pure RCU. I did it this way because I believe that either Cong's
races don't apply with have Vlad did things, or Cong will have to
implement the race fix slightly differently.
Signed-off-by: David S. Miller <davem@davemloft.net>
The DMA API generally relies on a struct device to work properly, and
only barely works without one for legacy reasons. Pass the easily
available struct device from the platform_device to remedy this.
Also use GFP_KERNEL instead of GFP_ATOMIC as the gfp_t for the memory
allocation, as we aren't in interrupt context or under a lock.
Note that this whole function looks somewhat bogus given that we never
even look at the returned dma address, and the CPHYSADDR magic on
a returned noncached mapping looks "interesting". But I'll leave
that to people more familiar with the code to sort out.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: John Crispin <john@phrozen.org>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: dmaengine@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Cc: linux-fbdev@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Cc: iommu@lists.linux-foundation.org
__cmpxchg_small erroneously uses u8 for load comparison which can
be either char or short. This patch changes the local variable to
u32 which is sufficiently sized, as the loaded value is already
masked and shifted appropriately. Using an integer size avoids
any unnecessary canonicalization from use of non native widths.
This patch is part of a series that adapts the MIPS small word
atomics code for xchg and cmpxchg on short and char to RISC-V.
Cc: RISC-V Patches <patches@groups.riscv.org>
Cc: Linux RISC-V <linux-riscv@lists.infradead.org>
Cc: Linux MIPS <linux-mips@linux-mips.org>
Signed-off-by: Michael Clark <michaeljclark@mac.com>
[paul.burton@mips.com:
- Fix varialble typo per Jonas Gorski.
- Consolidate load variable with other declarations.]
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: 3ba7f44d2b ("MIPS: cmpxchg: Implement 1 byte & 2 byte cmpxchg()")
Cc: stable@vger.kernel.org # v4.13+
This series finally gets us to the point of having system calls with
64-bit time_t on all architectures, after a long time of incremental
preparation patches.
There was actually one conversion that I missed during the summer,
i.e. Deepa's timex series, which I now updated based the 5.0-rc1 changes
and review comments.
The following system calls are now added on all 32-bit architectures
using the same system call numbers:
403 clock_gettime64
404 clock_settime64
405 clock_adjtime64
406 clock_getres_time64
407 clock_nanosleep_time64
408 timer_gettime64
409 timer_settime64
410 timerfd_gettime64
411 timerfd_settime64
412 utimensat_time64
413 pselect6_time64
414 ppoll_time64
416 io_pgetevents_time64
417 recvmmsg_time64
418 mq_timedsend_time64
419 mq_timedreceiv_time64
420 semtimedop_time64
421 rt_sigtimedwait_time64
422 futex_time64
423 sched_rr_get_interval_time64
Each one of these corresponds directly to an existing system call
that includes a 'struct timespec' argument, or a structure containing
a timespec or (in case of clock_adjtime) timeval. Not included here
are new versions of getitimer/setitimer and getrusage/waitid, which
are planned for the future but only needed to make a consistent API
rather than for correct operation beyond y2038. These four system
calls are based on 'timeval', and it has not been finally decided
what the replacement kernel interface will use instead.
So far, I have done a lot of build testing across most architectures,
which has found a number of bugs. Runtime testing so far included
testing LTP on 32-bit ARM with the existing system calls, to ensure
we do not regress for existing binaries, and a test with a 32-bit
x86 build of LTP against a modified version of the musl C library
that has been adapted to the new system call interface [3].
This library can be used for testing on all architectures supported
by musl-1.1.21, but it is not how the support is getting integrated
into the official musl release. Official musl support is planned
but will require more invasive changes to the library.
Link: https://lore.kernel.org/lkml/20190110162435.309262-1-arnd@arndb.de/T/
Link: https://lore.kernel.org/lkml/20190118161835.2259170-1-arnd@arndb.de/
Link: https://git.linaro.org/people/arnd/musl-y2038.git/ [2]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=IZVb
-----END PGP SIGNATURE-----
Merge tag 'y2038-new-syscalls' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground into timers/2038
Pull y2038 - time64 system calls from Arnd Bergmann:
This series finally gets us to the point of having system calls with 64-bit
time_t on all architectures, after a long time of incremental preparation
patches.
There was actually one conversion that I missed during the summer,
i.e. Deepa's timex series, which I now updated based the 5.0-rc1 changes
and review comments.
The following system calls are now added on all 32-bit architectures using
the same system call numbers:
403 clock_gettime64
404 clock_settime64
405 clock_adjtime64
406 clock_getres_time64
407 clock_nanosleep_time64
408 timer_gettime64
409 timer_settime64
410 timerfd_gettime64
411 timerfd_settime64
412 utimensat_time64
413 pselect6_time64
414 ppoll_time64
416 io_pgetevents_time64
417 recvmmsg_time64
418 mq_timedsend_time64
419 mq_timedreceiv_time64
420 semtimedop_time64
421 rt_sigtimedwait_time64
422 futex_time64
423 sched_rr_get_interval_time64
Each one of these corresponds directly to an existing system call that
includes a 'struct timespec' argument, or a structure containing a timespec
or (in case of clock_adjtime) timeval. Not included here are new versions
of getitimer/setitimer and getrusage/waitid, which are planned for the
future but only needed to make a consistent API rather than for correct
operation beyond y2038. These four system calls are based on 'timeval', and
it has not been finally decided what the replacement kernel interface will
use instead.
So far, I have done a lot of build testing across most architectures, which
has found a number of bugs. Runtime testing so far included testing LTP on
32-bit ARM with the existing system calls, to ensure we do not regress for
existing binaries, and a test with a 32-bit x86 build of LTP against a
modified version of the musl C library that has been adapted to the new
system call interface [3]. This library can be used for testing on all
architectures supported by musl-1.1.21, but it is not how the support is
getting integrated into the official musl release. Official musl support is
planned but will require more invasive changes to the library.
Link: https://lore.kernel.org/lkml/20190110162435.309262-1-arnd@arndb.de/T/
Link: https://lore.kernel.org/lkml/20190118161835.2259170-1-arnd@arndb.de/
Link: https://git.linaro.org/people/arnd/musl-y2038.git/ [2]
The system call tables have diverged a bit over the years, and a number
of the recent additions never made it into all architectures, for one
reason or another.
This is an attempt to clean it up as far as we can without breaking
compatibility, doing a number of steps:
- Add system calls that have not yet been integrated into all
architectures but that we definitely want there. This includes
{,f}statfs64() and get{eg,eu,g,p,u,pp}id() on alpha, which have
been missing traditionally.
- The s390 compat syscall handling is cleaned up to be more like
what we do on other architectures, while keeping the 31-bit
pointer extension. This was merged as a shared branch by the
s390 maintainers and is included here in order to base the other
patches on top.
- Add the separate ipc syscalls on all architectures that
traditionally only had sys_ipc(). This version is done without
support for IPC_OLD that is we have in sys_ipc. The
new semtimedop_time64 syscall will only be added here, not
in sys_ipc
- Add syscall numbers for a couple of syscalls that we probably
don't need everywhere, in particular pkey_* and rseq,
for the purpose of symmetry: if it's in asm-generic/unistd.h,
it makes sense to have it everywhere. I expect that any future
system calls will get assigned on all platforms together, even
when they appear to be specific to a single architecture.
- Prepare for having the same system call numbers for any future
calls. In combination with the generated tables, this hopefully
makes it easier to add new calls across all architectures
together.
All of the above are technically separate from the y2038 work,
but are done as preparation before we add the new 64-bit time_t
system calls everywhere, providing a common baseline set of system
calls.
I expect that glibc and other libraries that want to use 64-bit
time_t will require linux-5.1 kernel headers for building in
the future, and at a much later point may also require linux-5.1
or a later version as the minimum kernel at runtime. Having a
common baseline then allows the removal of many architecture or
kernel version specific workarounds.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=s4wf
-----END PGP SIGNATURE-----
Merge tag 'y2038-syscall-cleanup' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground into timers/2038
Pull preparatory work for y2038 changes from Arnd Bergmann:
System call unification and cleanup
The system call tables have diverged a bit over the years, and a number of
the recent additions never made it into all architectures, for one reason
or another.
This is an attempt to clean it up as far as we can without breaking
compatibility, doing a number of steps:
- Add system calls that have not yet been integrated into all architectures
but that we definitely want there. This includes {,f}statfs64() and
get{eg,eu,g,p,u,pp}id() on alpha, which have been missing traditionally.
- The s390 compat syscall handling is cleaned up to be more like what we
do on other architectures, while keeping the 31-bit pointer
extension. This was merged as a shared branch by the s390 maintainers
and is included here in order to base the other patches on top.
- Add the separate ipc syscalls on all architectures that traditionally
only had sys_ipc(). This version is done without support for IPC_OLD
that is we have in sys_ipc. The new semtimedop_time64 syscall will only
be added here, not in sys_ipc
- Add syscall numbers for a couple of syscalls that we probably don't need
everywhere, in particular pkey_* and rseq, for the purpose of symmetry:
if it's in asm-generic/unistd.h, it makes sense to have it everywhere. I
expect that any future system calls will get assigned on all platforms
together, even when they appear to be specific to a single architecture.
- Prepare for having the same system call numbers for any future calls. In
combination with the generated tables, this hopefully makes it easier to
add new calls across all architectures together.
All of the above are technically separate from the y2038 work, but are done
as preparation before we add the new 64-bit time_t system calls everywhere,
providing a common baseline set of system calls.
I expect that glibc and other libraries that want to use 64-bit time_t will
require linux-5.1 kernel headers for building in the future, and at a much
later point may also require linux-5.1 or a later version as the minimum
kernel at runtime. Having a common baseline then allows the removal of many
architecture or kernel version specific workarounds.
Program rx/tx-delay always from DT.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Delete board-specific link status. This info should now come from
the DT only.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
The fixed-link node in the DT should now take care of the link status,
so this hack can be deleted.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Warn if deprecated link status is being used.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Currently OCTEON ethernet falls back to phyless operation on
boards where we have no known PHY address or a fixed-link node.
Add fixed-link support for boards that need it, so we can clean up
the platform code and ethernet driver from some legacy code.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Accordingly to the documentation
---cut---
The GCR_ERROR_CAUSE.ERR_TYPE field and the GCR_ERROR_MULT.ERR_TYPE
fields can be cleared by either a reset or by writing the current
value of GCR_ERROR_CAUSE.ERR_TYPE to the
GCR_ERROR_CAUSE.ERR_TYPE register.
---cut---
Do exactly this. Original value of cm_error may be safely written back;
it clears error cause and keeps other bits untouched.
Fixes: 3885c2b463 ("MIPS: CM: Add support for reporting CM cache errors")
Signed-off-by: Vladimir Kondratiev <vladimir.kondratiev@linux.intel.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # v4.3+
On my Yeeloong 8089, I noticed the machine fails to shutdown
properly, and often, the function mach_prepare_reboot() is
unexpectedly executed, thus the machine reboots instead. A
wait loop is needed to ensure the system is in a well-defined
state before going down.
In commit 997e93d4df ("MIPS: Hang more efficiently on
halt/powerdown/restart"), a general superset of the wait loop for all
platforms is already provided, so we don't need to implement our own.
This commit simply removes the unreachable() compiler marco after
mach_prepare_reboot(), thus allowing the execution of machine_hang().
My test shows that the machine is now able to shutdown successfully.
Please note that there are two different bugs preventing the machine
from shutting down, another work-in-progress commit is needed to
fix a lockup in cpufreq / i8259 driver, please read Reference, this
commit does not fix that bug.
Reference: https://lkml.org/lkml/2019/2/5/908
Signed-off-by: Yifeng Li <tomli@tomli.me>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-kernel@vger.kernel.org
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: stable@vger.kernel.org # v4.17+
This adds 21 new system calls on each ABI that has 32-bit time_t
today. All of these have the exact same semantics as their existing
counterparts, and the new ones all have macro names that end in 'time64'
for clarification.
This gets us to the point of being able to safely use a C library
that has 64-bit time_t in user space. There are still a couple of
loose ends to tie up in various areas of the code, but this is the
big one, and should be entirely uncontroversial at this point.
In particular, there are four system calls (getitimer, setitimer,
waitid, and getrusage) that don't have a 64-bit counterpart yet,
but these can all be safely implemented in the C library by wrapping
around the existing system calls because the 32-bit time_t they
pass only counts elapsed time, not time since the epoch. They
will be dealt with later.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
The time, stime, utime, utimes, and futimesat system calls are only
used on older architectures, and we do not provide y2038 safe variants
of them, as they are replaced by clock_gettime64, clock_settime64,
and utimensat_time64.
However, for consistency it seems better to have the 32-bit architectures
that still use them call the "time32" entry points (leaving the
traditional handlers for the 64-bit architectures), like we do for system
calls that now require two versions.
Note: We used to always define __ARCH_WANT_SYS_TIME and
__ARCH_WANT_SYS_UTIME and only set __ARCH_WANT_COMPAT_SYS_TIME and
__ARCH_WANT_SYS_UTIME32 for compat mode on 64-bit kernels. Now this is
reversed: only 64-bit architectures set __ARCH_WANT_SYS_TIME/UTIME, while
we need __ARCH_WANT_SYS_TIME32/UTIME32 for 32-bit architectures and compat
mode. The resulting asm/unistd.h changes look a bit counterintuitive.
This is only a cleanup patch and it should not change any behavior.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
This is the big flip, where all 32-bit architectures set COMPAT_32BIT_TIME
and use the _time32 system calls from the former compat layer instead
of the system calls that take __kernel_timespec and similar arguments.
The temporary redirects for __kernel_timespec, __kernel_itimerspec
and __kernel_timex can get removed with this.
It would be easy to split this commit by architecture, but with the new
generated system call tables, it's easy enough to do it all at once,
which makes it a little easier to check that the changes are the same
in each table.
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
These are all for ignoring the lack of obsolete system calls,
which have been marked the same way in scripts/checksyscall.sh,
so these can be removed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
A lot of system calls that pass a time_t somewhere have an implementation
using a COMPAT_SYSCALL_DEFINEx() on 64-bit architectures, and have
been reworked so that this implementation can now be used on 32-bit
architectures as well.
The missing step is to redefine them using the regular SYSCALL_DEFINEx()
to get them out of the compat namespace and make it possible to build them
on 32-bit architectures.
Any system call that ends in 'time' gets a '32' suffix on its name for
that version, while the others get a '_time32' suffix, to distinguish
them from the normal version, which takes a 64-bit time argument in the
future.
In this step, only 64-bit architectures are changed, doing this rename
first lets us avoid touching the 32-bit architectures twice.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Commit 46011e6ea3 ("MIPS: Make set_pte() SMP safe.") introduced an
open-coded version of cmpxchg() within set_pte(), that always operated
on a value the size of an unsigned long. That is, it used ll/sc
instructions when CONFIG_32BIT=y or lld/scd instructions when
CONFIG_64BIT=y.
This was broken for configurations in which pte_t is larger than an
unsigned long (with the exception of XPA configurations which have a
different implementation of set_pte()), because we no longer update the
whole PTE. Indeed commit 46011e6ea3 ("MIPS: Make set_pte() SMP safe.")
notes:
> The case of CONFIG_64BIT_PHYS_ADDR && CONFIG_CPU_MIPS32 is *not*
> handled.
In practice this affects Netlogic XLR/XLS systems including
nlm_xlr_defconfig.
Commit 82f4f66ddf ("MIPS: Remove open-coded cmpxchg() in set_pte()")
then replaced this open-coded version of cmpxchg() with an actual call
to cmpxchg(). Unfortunately the configurations mentioned above then fail
to build because cmpxchg() can only operate on values 32 bits or smaller
in size, resulting in:
arch/mips/include/asm/cmpxchg.h:166:11: error:
call to '__cmpxchg_called_with_bad_pointer' declared with
attribute error: Bad argument size for cmpxchg
One option that would fix the build failure & restore the previous
behaviour would be to cast the pte pointer to a pointer to unsigned
long, so that cmpxchg() would operate on just 32 bits of the PTE as it
has been since commit 46011e6ea3 ("MIPS: Make set_pte() SMP safe.").
That feels like an ugly hack though, and the behaviour of set_pte() is
likely a little broken.
Instead we take advantage of the fact that the affected configurations
already know at compile time that the CPU will support 64 bits (ie. have
hardcoded cpu_has_64bits in cpu-feature-overrides.h) in order to allow
cmpxchg64() to be used in these configurations. set_pte() then makes use
of cmpxchg64() when necessary.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: 46011e6ea3 ("MIPS: Make set_pte() SMP safe.")
Fixes: 82f4f66ddf ("MIPS: Remove open-coded cmpxchg() in set_pte()")
KVM makes use of check_switch_mmu_context(), check_mmu_context() &
get_new_mmu_context() which are no longer static inline functions in a
header. As such they need to be exported for KVM to successfully build
as a module, which was previously overlooked. Add the missing exports.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: 4ebea49ce2 ("MIPS: mm: Un-inline get_new_mmu_context")
Fixes: 42d5b84657 ("MIPS: mm: Unify ASID version checks")
All users of the fixed_phy_add() pass -1 as GPIO number
to the fixed phy driver, and all users of fixed_phy_register()
pass -1 as GPIO number as well, except for the device
tree MDIO bus.
Any new users should create a proper device and pass the
GPIO as a descriptor associated with the device so delete
the GPIO argument from the calls and drop the code looking
requesting a GPIO in fixed_phy_add().
In fixed phy_register(), investigate the "fixed-link"
node and pick the GPIO descriptor from "link-gpios" if
this property exists. Move the corresponding code out
of of_mdio.c as the fixed phy code anyways requires
OF to be in use.
Tested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Patch (b6c7a324df "MIPS: Fix get_frame_info() handling of
microMIPS function size.") introduces additional function size
check for microMIPS by only checking insn between ip and ip + func_size.
However, func_size in get_frame_info() is always 0 if KALLSYMS is not
enabled. This causes get_frame_info() to return immediately without
calculating correct frame_size, which in turn causes "Can't analyze
schedule() prologue" warning messages at boot time.
This patch removes func_size check, and let the frame_size check run
up to 128 insns for both MIPS and microMIPS.
Signed-off-by: Jun-Ru Chang <jrjang@realtek.com>
Signed-off-by: Tony Wu <tonywu@realtek.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: b6c7a324df ("MIPS: Fix get_frame_info() handling of microMIPS function size.")
Cc: <ralf@linux-mips.org>
Cc: <jhogan@kernel.org>
Cc: <macro@mips.com>
Cc: <yamada.masahiro@socionext.com>
Cc: <peterz@infradead.org>
Cc: <mingo@kernel.org>
Cc: <linux-mips@vger.kernel.org>
Cc: <linux-kernel@vger.kernel.org>
Commit 7b3415f581 ("MIPS: Loongson32: Remove unused platform devices")
removed the definitions of platform devices which have no in tree
drivers from common Loongson32 code, but missed their removal from
Loongson 1B board code in arch/mips/loongson32/ls1b/board.c. This causes
build failures due to the missing declarations of ls1x_dma_pdev,
ls1x_nand_pdev & their associated *_set_platdata functions.
Remove the dead code from arch/mips/loongson32/ls1b/board.c to fix the
build.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: 7b3415f581 ("MIPS: Loongson32: Remove unused platform devices")
Commit a96d68ba3b ("MIPS: Loongson32: clarify we don't support MIPS16
and merge configs") attempted to reduce duplication in Kconfig by
consolidating some selects common to Loongson 1B & 1C CPUs under
CPU_LOONGSON1. Unfortunately it clearly wasn't tested because by
removing SYS_SUPPORTS_32BIT_KERNEL it prevented 32BIT from being enabled
leading to all sorts of strange build errors from a kernel configured to
build as neither 32 nor 64 bit.
Both loongson1b_defconfig & loongson1c_defconfig failed to build due to
this problem.
Revert the cleanup portions of commit a96d68ba3b ("MIPS: Loongson32:
clarify we don't support MIPS16 and merge configs"), keeping only its
removal of the selection of SYS_SUPPORTS_MIPS16.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: a96d68ba3b ("MIPS: Loongson32: clarify we don't support MIPS16 and merge configs")
Commit f263f2a2c6 ("MIPS: Compile post DMA flush only when needed")
pushed the selection of ARCH_HAS_SYNC_DMA_FOR_CPU down to various
SYS_HAS_CPU_* Kconfig entries corresponding to CPUs for which
cpu_needs_post_dma_flush() might return true, but unfortunately missed
the fact that some of these CPUs can be used in configurations with
DMA_NONCOHERENT=n. When this is the case the kernel build does not
include our definition of arch_sync_dma_for_cpu() from
arch/mips/mm/dma-noncoherent.c and the build fails with a link error.
One example of this problem is ip27_defconfig:
kernel/dma/direct.o: In function `dma_direct_sync_single_for_cpu':
direct.c:(.text+0x6c): undefined reference to `arch_sync_dma_for_cpu'
kernel/dma/direct.o: In function `dma_direct_sync_sg_for_cpu':
direct.c:(.text+0x1f0): undefined reference to `arch_sync_dma_for_cpu'
kernel/dma/direct.o: In function `dma_direct_alloc':
direct.c:(.text+0xc20): undefined reference to `arch_dma_alloc'
kernel/dma/direct.o: In function `dma_direct_free':
direct.c:(.text+0xc3c): undefined reference to `arch_dma_free'
make[1]: *** [Makefile:1021: vmlinux] Error 1
make: *** [Makefile:152: sub-make] Error 2
Fix this by selecting ARCH_HAS_SYNC_DMA_FOR_CPU only when
DMA_NONCOHERENT is also selected. The SYS_HAS_CPU_BMIPS5000 case is left
as-is because systems with that CPU always select DMA_NONCOHERENT
anyway.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: f263f2a2c6 ("MIPS: Compile post DMA flush only when needed")
DTC introduced an i2c_bus_reg check in v1.4.7, used since Linux v4.20,
which complains about upper case addresses used in the unit name.
nexys4ddr.dts names an I2C device node "ad7420@4B", leading to:
arch/mips/boot/dts/xilfpga/nexys4ddr.dts:109.16-112.8: Warning
(i2c_bus_reg): /i2c@10A00000/ad7420@4B: I2C bus unit address format
error, expected "4b"
Fix this by switching to lower case addresses throughout the file, as is
*mostly* the case in the file already & fairly standard throughout the
tree.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: stable@vger.kernel.org # v4.20+
Cc: linux-mips@vger.kernel.org
Our hugepage support already exists for MIPS64 CPUs, and is already
enabled for older architecture revisions. There's nothing MIPSr6
specific involved, and our hugepage support already works fine for
MIPS64r6 CPUs such as the I6500, so allow it to be selected in Kconfig.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
set_pte() contains an open coded version of cmpxchg() - it atomically
replaces the buddy pte's value if it is currently zero. Simplify the
code considerably by just using cmpxchg() instead of reinventing it.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Introduce support for using MemoryMapIDs (MMIDs) as an alternative to
Address Space IDs (ASIDs). The major difference between the two is that
MMIDs are global - ie. an MMID uniquely identifies an address space
across all coherent CPUs. In contrast ASIDs are non-global per-CPU IDs,
wherein each address space is allocated a separate ASID for each CPU
upon which it is used. This global namespace allows a new GINVT
instruction be used to globally invalidate TLB entries associated with a
particular MMID across all coherent CPUs in the system, removing the
need for IPIs to invalidate entries with separate ASIDs on each CPU.
The allocation scheme used here is largely borrowed from arm64 (see
arch/arm64/mm/context.c). In essence we maintain a bitmap to track
available MMIDs, and MMIDs in active use at the time of a rollover to a
new MMID version are preserved in the new version. The allocation scheme
requires efficient 64 bit atomics in order to perform reasonably, so
this support depends upon CONFIG_GENERIC_ATOMIC64=n (ie. currently it
will only be included in MIPS64 kernels).
The first, and currently only, available CPU with support for MMIDs is
the MIPS I6500. This CPU supports 16 bit MMIDs, and so for now we cap
our MMIDs to 16 bits wide in order to prevent the bitmap growing to
absurd sizes if any future CPU does implement 32 bit MMIDs as the
architecture manuals suggest is recommended.
When MMIDs are in use we also make use of GINVT instruction which is
available due to the global nature of MMIDs. By executing a sequence of
GINVT & SYNC 0x14 instructions we can avoid the overhead of an IPI to
each remote CPU in many cases. One complication is that GINVT will
invalidate wired entries (in all cases apart from type 0, which targets
the entire TLB). In order to avoid GINVT invalidating any wired TLB
entries we set up, we make sure to create those entries using a reserved
MMID (0) that we never associate with any address space.
Also of note is that KVM will require further work in order to support
MMIDs & GINVT, since KVM is involved in allocating IDs for guests & in
configuring the MMU. That work is not part of this patch, so for now
when MMIDs are in use KVM is disabled.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Add a family of ginvt_* functions making it easy to emit a GINVT
instruction to globally invalidate TLB entries. We make use of the
_ASM_MACRO infrastructure to support emitting the instructions even if
the assembler isn't new enough to support them natively.
An associated STYPE_GINV definition & sync_ginv() function are added to
emit a sync instruction of type 0x14, which operates as a completion
barrier for these new GINVT (and GINVI) instructions.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
When we gain MMID support we'll be storing MMIDs as atomic64_t values
and accessing them via atomic64_* functions. This necessitates that we
don't use cpu_context() as the left hand side of an assignment, ie. as a
modifiable lvalue. In preparation for this introduce a new
set_cpu_context() function & replace all assignments with cpu_context()
on their left hand side with an equivalent call to set_cpu_context().
To enforce that cpu_context() should not be used for assignments, we
rewrite it as a static inline function.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Introduce a new check_mmu_context() function to check an mm's ASID
version & get a new one if it's outdated, and a
check_switch_mmu_context() function which additionally sets up the new
ASID & page directory. Simplify switch_mm() & various
get_new_mmu_context() callsites in MIPS KVM by making use of the new
functions, which will help reduce the amount of code that requires
modification to gain MMID support.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
In preparation for adding MMID support to get_new_mmu_context() which
will increase the size of the function somewhat, move it from
asm/mmu_context.h into a C file.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Split always-included objects to one per line in order to make it easier
to modify the list of included objects.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
All 3 variants of local_flush_tlb_mm() are now effectively simple calls
to drop_mmu_context(). Remove them and use drop_mmu_context() directly.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
The r4k variant of local_flush_tlb_mm() wraps its call to
drop_mmu_context() with a preempt_disable() & preempt_enable() pair, but
this is redundant since drop_mmu_context() disables interrupts and from
Documentation/preempt-locking.txt:
Note that you do not need to explicitly prevent preemption if you are
holding any locks or interrupts are disabled, since preemption is
implicitly disabled in those cases.
Remove the redundant preempt_disable() & preempt_enable() calls.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
drop_mmu_context() is preceded by a comment indicating what happens if
the mm provided is currently active on the local CPU. Move that comment
into the block that executes in this case, adjusting slightly to reflect
its new location.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
If an mm does not have an ASID on the local CPU then drop_mmu_context()
is always redundant, since there's no context to "drop". Various callers
of drop_mmu_context() check whether the mm has been allocated an ASID
before making the call. Move that check into drop_mmu_context() and
remove it from callers to simplify them.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
If drop_mmu_context() is called with an mm that is not currently active
on the local CPU then there's no need for us to stop & start a hardware
page table walker because it can't be fetching entries for the ASID
corresponding to the mm we're operating on.
Move the htw_stop() & htw_start() calls into the block which we run only
if the mm is currently active, in order to avoid the redundant work.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
get_new_mmu_context() accepts a cpu argument, but implicitly assumes
that this is always equal to smp_processor_id() by operating on the
local CPU's TLB & icache.
Remove the cpu argument and have get_new_mmu_context() call
smp_processor_id() instead.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
The drop_mmu_context() function accepts a cpu argument, but it
implicitly expects that this is always equal to smp_processor_id() by
allocating & configuring an ASID on the local CPU when the mm is active
on the CPU indicated by the cpu argument.
All callers do provide the value of smp_processor_id() to the cpu
argument.
Remove the redundant argument and have drop_mmu_context() call
smp_processor_id() itself, making it clearer that the cpu variable
always represents the local CPU.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
MIPS has separate definitions of activate_mm() & switch_mm() which are
identical apart from switch_mm() checking that the ASID is valid before
acquiring a new one.
We know that when activate_mm() is called cpu_context(X, mm) will be
zero, and this will never be considered a valid ASID because we never
allow the ASID version number to be zero, instead beginning with version
1 using asid_first_version(). Therefore switch_mm() will always allocate
a new ASID when called for a new task, meaning that it will behave
identically to activate_mm().
Take advantage of this to remove the duplication & define activate_mm()
using switch_mm() just like many other architectures do.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
On the Loongson-2G/2H/3A/3B there is a hardware flaw that ll/sc and
lld/scd is very weak ordering. We should add sync instructions "before
each ll/lld" and "at the branch-target between ll/sc" to workaround.
Otherwise, this flaw will cause deadlock occasionally (e.g. when doing
heavy load test with LTP).
Below is the explaination of CPU designer:
"For Loongson 3 family, when a memory access instruction (load, store,
or prefetch)'s executing occurs between the execution of LL and SC, the
success or failure of SC is not predictable. Although programmer would
not insert memory access instructions between LL and SC, the memory
instructions before LL in program-order, may dynamically executed
between the execution of LL/SC, so a memory fence (SYNC) is needed
before LL/LLD to avoid this situation.
Since Loongson-3A R2 (3A2000), we have improved our hardware design to
handle this case. But we later deduce a rarely circumstance that some
speculatively executed memory instructions due to branch misprediction
between LL/SC still fall into the above case, so a memory fence (SYNC)
at branch-target (if its target is not between LL/SC) is needed for
Loongson 3A1000, 3B1500, 3A2000 and 3A3000.
Our processor is continually evolving and we aim to to remove all these
workaround-SYNCs around LL/SC for new-come processor."
Here is an example:
Both cpu1 and cpu2 simutaneously run atomic_add by 1 on same atomic var,
this bug cause both 'sc' run by two cpus (in atomic_add) succeed at same
time('sc' return 1), and the variable is only *added by 1*, sometimes,
which is wrong and unacceptable(it should be added by 2).
Why disable fix-loongson3-llsc in compiler?
Because compiler fix will cause problems in kernel's __ex_table section.
This patch fix all the cases in kernel, but:
+. the fix at the end of futex_atomic_cmpxchg_inatomic is for branch-target
of 'bne', there other cases which smp_mb__before_llsc() and smp_llsc_mb() fix
the ll and branch-target coincidently such as atomic_sub_if_positive/
cmpxchg/xchg, just like this one.
+. Loongson 3 does support CONFIG_EDAC_ATOMIC_SCRUB, so no need to touch
edac.h
+. local_ops and cmpxchg_local should not be affected by this bug since
only the owner can write.
+. mips_atomic_set for syscall.c is deprecated and rarely used, just let
it go
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Huang Pei <huangpei@loongson.cn>
[paul.burton@mips.com:
- Simplify the addition of -mno-fix-loongson3-llsc to cflags, and add
a comment describing why it's there.
- Make loongson_llsc_mb() a no-op when
CONFIG_CPU_LOONGSON3_WORKAROUNDS=n, rather than a compiler memory
barrier.
- Add a comment describing the bug & how loongson_llsc_mb() helps
in asm/barrier.h.]
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: ambrosehua@gmail.com
Cc: Steven J . Hill <Steven.Hill@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: Li Xuefeng <lixuefeng@loongson.cn>
Cc: Xu Chenghua <xuchenghua@loongson.cn>
SO_RCVTIMEO and SO_SNDTIMEO socket options use struct timeval
as the time format. struct timeval is not y2038 safe.
The subsequent patches in the series add support for new socket
timeout options with _NEW suffix that will use y2038 safe
data structures. Although the existing struct timeval layout
is sufficiently wide to represent timeouts, because of the way
libc will interpret time_t based on user defined flag, these
new flags provide a way of having a structure that is the same
for all architectures consistently.
Rename the existing options with _OLD suffix forms so that the
right option is enabled for userspace applications according
to the architecture and time_t definition of libc.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Cc: ccaulfie@redhat.com
Cc: deller@gmx.de
Cc: paulus@samba.org
Cc: ralf@linux-mips.org
Cc: rth@twiddle.net
Cc: cluster-devel@redhat.com
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-alpha@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: linux-parisc@vger.kernel.org
Cc: sparclinux@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
When generating vdso-o32.lds & vdso-n32.lds for use with programs
running as compat ABIs under 64b kernels, we previously haven't included
the compiler flags that are supposedly common to all ABIs - ie. those in
the ccflags-vdso variable.
This is problematic in cases where we need to provide the -m%-float flag
in order to ensure that we don't attempt to use a floating point ABI
that's incompatible with the target CPU & ABI. For example a toolchain
using current gcc trunk configured --with-fp-32=xx fails to build a
64r6el_defconfig kernel with the following error:
cc1: error: '-march=mips1' requires '-mfp32'
make[2]: *** [arch/mips/vdso/Makefile:135: arch/mips/vdso/vdso-o32.lds] Error 1
Include $(ccflags-vdso) for the compat VDSO .lds builds, just as it is
included for the native VDSO .lds & when compiling objects for the
compat VDSOs. This ensures we consistently provide the -msoft-float flag
amongst others, avoiding the problem by ensuring we're agnostic to the
toolchain defaults.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: ebb5e78cc6 ("MIPS: Initial implementation of a VDSO")
Cc: linux-mips@vger.kernel.org
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Maciej W . Rozycki <macro@linux-mips.org>
Cc: stable@vger.kernel.org # v4.4+
The MIPS VDSO build currently doesn't provide the -msoft-float flag to
the compiler as the kernel proper does. This results in an attempt to
use the compiler's default floating point configuration, which can be
problematic in cases where this is incompatible with the target CPU's
-march= flag. For example decstation_defconfig fails to build using
toolchains in which gcc was configured --with-fp-32=xx with the
following error:
LDS arch/mips/vdso/vdso.lds
cc1: error: '-march=r3000' requires '-mfp32'
make[2]: *** [scripts/Makefile.build:379: arch/mips/vdso/vdso.lds] Error 1
The kernel proper avoids this error because we build with the
-msoft-float compiler flag, rather than using the compiler's default.
Pass this flag through to the VDSO build so that it too becomes agnostic
to the toolchain's floating point configuration.
Note that this is filtered out from KBUILD_CFLAGS rather than simply
always using -msoft-float such that if we switch the kernel to use
-mno-float in the future the VDSO will automatically inherit the change.
The VDSO doesn't actually include any floating point code, and its
.MIPS.abiflags section is already manually generated to specify that
it's compatible with any floating point ABI. As such this change should
have no effect on the resulting VDSO, apart from fixing the build
failure for affected toolchains.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Reported-by: Kevin Hilman <khilman@baylibre.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Kevin Hilman <khilman@baylibre.com>
References: https://lore.kernel.org/linux-mips/1477843551-21813-1-git-send-email-linux@roeck-us.net/
References: https://kernelci.org/build/id/5c4e4ae059b5142a249ad004/logs/
Fixes: ebb5e78cc6 ("MIPS: Initial implementation of a VDSO")
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@vger.kernel.org
Cc: stable@vger.kernel.org # v4.4+
Don't set octeon_dma_bar_type if PCI is disabled. This avoids creation
of the MSI irqchip later on, and saves a bit of memory.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: a214720cbf ("Disable MSI also when pcie-octeon.pcie_disable on")
Cc: stable@vger.kernel.org # v3.3+
Cc: linux-mips@vger.kernel.org
SMI/MDIO enable is handled by the OCTEON MDIO driver, so we can delete
the duplicated functionality from the platform code.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
In Kbuild, if_changed and friends must have FORCE as a prerequisite.
Hence, $(filter-out FORCE,$^) or $(filter-out $(PHONY),$^) is a common
idiom to get the names of all the prerequisites except phony targets.
Add real-prereqs as a shorthand.
Note:
We cannot replace $(filter %.o,$^) in cmd_link_multi-m because $^ may
include auto-generated dependencies from the .*.cmd file when a single
object module is changed into a multi object module. Refer to commit
69ea912fda ("kbuild: remove unneeded link_multi_deps"). I added some
comment to avoid accidental breakage.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Rob Herring <robh@kernel.org>
The interrupt number set in the devicetree node of the DMA driver was
wrong.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
The IPC system call handling is highly inconsistent across architectures,
some use sys_ipc, some use separate calls, and some use both. We also
have some architectures that require passing IPC_64 in the flags, and
others that set it implicitly.
For the addition of a y2038 safe semtimedop() system call, I chose to only
support the separate entry points, but that requires first supporting
the regular ones with their own syscall numbers.
The IPC_64 is now implied by the new semctl/shmctl/msgctl system
calls even on the architectures that require passing it with the ipc()
multiplexer.
I'm not adding the new semtimedop() or semop() on 32-bit architectures,
those will get implemented using the new semtimedop_time64() version
that gets added along with the other time64 calls.
Three 64-bit architectures (powerpc, s390 and sparc) get semtimedop().
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
The behavior of these system calls is slightly different between
architectures, as determined by the CONFIG_ARCH_WANT_IPC_PARSE_VERSION
symbol. Most architectures that implement the split IPC syscalls don't set
that symbol and only get the modern version, but alpha, arm, microblaze,
mips-n32, mips-n64 and xtensa expect the caller to pass the IPC_64 flag.
For the architectures that so far only implement sys_ipc(), i.e. m68k,
mips-o32, powerpc, s390, sh, sparc, and x86-32, we want the new behavior
when adding the split syscalls, so we need to distinguish between the
two groups of architectures.
The method I picked for this distinction is to have a separate system call
entry point: sys_old_*ctl() now uses ipc_parse_version, while sys_*ctl()
does not. The system call tables of the five architectures are changed
accordingly.
As an additional benefit, we no longer need the configuration specific
definition for ipc_parse_version(), it always does the same thing now,
but simply won't get called on architectures with the modern interface.
A small downside is that on architectures that do set
ARCH_WANT_IPC_PARSE_VERSION, we now have an extra set of entry points
that are never called. They only add a few bytes of bloat, so it seems
better to keep them compared to adding yet another Kconfig symbol.
I considered adding new syscall numbers for the IPC_64 variants for
consistency, but decided against that for now.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In order to have a common code base for fscrypt "post read" processing
for all filesystems which support encryption, this commit removes
filesystem specific build config option (e.g. CONFIG_EXT4_FS_ENCRYPTION)
and replaces it with a build option (i.e. CONFIG_FS_ENCRYPTION) whose
value affects all the filesystems making use of fscrypt.
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
This line is weird in multiple ways.
(CONFIG_GENERIC_CSUM) might be a typo of $(CONFIG_GENERIC_CSUM).
Even if you add '$' to it, $(CONFIG_GENERIC_CSUM) is never evaluated
to 'y' because scripts/Makefile.asm-generic does not include
include/config/auto.conf. So, the asm-generic wrapper of checksum.h
is never generated.
Even if you manage to generate it, it is never included by anyone
because MIPS has the checkin header with the same file name:
arch/mips/include/asm/checksum.h
As you see in the top Makefile, the checkin headers are included before
generated ones.
LINUXINCLUDE := \
-I$(srctree)/arch/$(SRCARCH)/include \
-I$(objtree)/arch/$(SRCARCH)/include/generated \
...
Commit 4e0748f5be ("MIPS: Use generic checksum functions for MIPS R6")
already added the asm-generic fallback code in the checkin header:
#ifdef CONFIG_GENERIC_CSUM
#include <asm/generic/checksum.h>
#else
...
#endif
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-kernel@vger.kernel.org
GS232 core have implemented all necessary mips32r2 instructions.
Serval missing FP instructions can be emulated by kernel.
The issue of di instruction have been solved.
Thus we revert the ISA level back to MIPS32R2.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: keguang.zhang@gmail.com
GS232 core used in Loongson-1 processors has a bug that
di instruction doesn't save the irqflag immediately.
Workaround by set irqflag in CP0 before di instructions
as same as Loongson-3.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: keguang.zhang@gmail.com
PMON bootloader on Loongson-1C will use memory between
0x80100000 and 0x80200000 as stack.
Use 0x80100000 as load address may hang the bootloader
during loading.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: keguang.zhang@gmail.com
Accorading to GS232 core user's manual, it doesn't support MIPS16.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: keguang.zhang@gmail.com
With the target now being fully OF based, we can drop the legacy clock
registration code. All clocks are now probed via devicetree.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: Felix Fietkau <nbd@nbd.name>
With the target now being fully OF based, we can drop the legacy platform
device registration code. All devices and their drivers are now probed
via OF.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: Felix Fietkau <nbd@nbd.name>
With the target now being fully OF based, we can drop the legacy pci
platform code. The only bits that we need to keep is the fixup code
which we move to its own code file.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: Felix Fietkau <nbd@nbd.name>
With the target now being fully OF based, we can drop the legacy mach
files. Boards can now boot fully of devicetree files.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: Felix Fietkau <nbd@nbd.name>
With the target now being fully OF based, we can drop the legacy IRQ code.
All IRQs are now handled via the new irqchip drivers.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: Felix Fietkau <nbd@nbd.name>
On AR934x, the MDIO reference clock can be configured to a fixed 100 MHz
clock. If that feature is not used, it defaults to the main reference
clock, like on all other SoC.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: John Crispin <john@phrozen.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Use the same functions as the legacy code
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
It can be autodetected for many SoCs using the strapping options.
If the clock is specified in DT, the autodetected value is ignored
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Preparation for passing the mapped base via DT
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Preparation for transitioning the legacy clock setup code over
to OF.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: John Crispin <john@phrozen.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
platform.c contains several unused platform device with no
drivers submited.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: keguang.zhang@gmail.com
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Yangtao Li <tiny.windzz@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Marcin Nowakowski <marcin.nowakowski@mips.com>
Cc: Yasha Cherikovsky <yasha.che3@gmail.com>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Yangtao Li <tiny.windzz@gmail.com>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: John Crispin <john@phrozen.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[paul.burton@mips.com:
Remove return 0 from init_debugfs() as pointed out by Aaro Koskinen.]
Signed-off-by: Paul Burton <paul.burton@mips.com>
- Fix IPI handling for Lantiq SoCs, which was broken by changes made
back in v4.12.
- Enable OF/DT serial support in ath79_defconfig to give us working
serial by default.
- Fix 64b builds for the Jazz platform.
- Set up a struct device for the BCM47xx SoC to allow BCM47xx drivers to
perform DMA again following the major DMA mapping changes made in
v4.19.
- Disable MSI on Cavium Octeon systems when the pcie_disable command
line parameter introduced in v3.3 is used, in order to avoid
inadvetently accessing PCIe controller registers despite the command
line.
- Fix a build failure for Cavium Octeon kernels with kexec enabled,
introduced in v4.20.
- Fix a regression in the behaviour of semctl/shmctl/msgctl IPC syscalls
for kernels including n32 support but not o32 support caused by some
cleanup in v3.19.
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQRgLjeFAZEXQzy86/s+p5+stXUA3QUCXEJhqRUccGF1bC5idXJ0
b25AbWlwcy5jb20ACgkQPqefrLV1AN2aWwEA4ZExeZQi+g9oPNII/jd9wbLKU4Eq
xjl/+NdzPVu+pP4A/AuG5hsEMFIgS2U0k2js7kNMHCzoV9Ky2m3kdbSNHvQI
=AqoC
-----END PGP SIGNATURE-----
Merge tag 'mips_fixes_5.0_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Paul Burton:
- Fix IPI handling for Lantiq SoCs, which was broken by changes made
back in v4.12.
- Enable OF/DT serial support in ath79_defconfig to give us working
serial by default.
- Fix 64b builds for the Jazz platform.
- Set up a struct device for the BCM47xx SoC to allow BCM47xx drivers
to perform DMA again following the major DMA mapping changes made in
v4.19.
- Disable MSI on Cavium Octeon systems when the pcie_disable command
line parameter introduced in v3.3 is used, in order to avoid
inadvetently accessing PCIe controller registers despite the command
line.
- Fix a build failure for Cavium Octeon kernels with kexec enabled,
introduced in v4.20.
- Fix a regression in the behaviour of semctl/shmctl/msgctl IPC
syscalls for kernels including n32 support but not o32 support caused
by some cleanup in v3.19.
* tag 'mips_fixes_5.0_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: OCTEON: fix kexec support
mips: fix n32 compat_ipc_parse_version
Disable MSI also when pcie-octeon.pcie_disable on
MIPS: BCM47XX: Setup struct device for the SoC
MIPS: jazz: fix 64bit build
MIPS: ath79: Enable OF serial ports in the default config
MIPS: lantiq: Use CP0_LEGACY_COMPARE_IRQ
MIPS: lantiq: Fix IPI interrupt handling
dma_sync_phys() is only called for some CPUs when a mapping is removed.
Add ARCH_HAS_SYNC_DMA_FOR_CPU only for the CPUs listed in
cpu_needs_post_dma_flush() which need this extra call and do not compile
this code in for other CPUs. We need this for R10000, R12000, BMIPS5000
CPUs and CPUs supporting MAAR which was introduced in MIPS32r5.
This will hopefully improve the performance of the not affected devices.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: ralf@linux-mips.org
Cc: jhogan@kernel.org
Cc: linux-mips@vger.kernel.org
Cc: nbd@nbd.name
This introduces a new generic SOL_SOCKET-level socket option called
SO_BINDTOIFINDEX. It behaves similar to SO_BINDTODEVICE, but takes a
network interface index as argument, rather than the network interface
name.
User-space often refers to network-interfaces via their index, but has
to temporarily resolve it to a name for a call into SO_BINDTODEVICE.
This might pose problems when the network-device is renamed
asynchronously by other parts of the system. When this happens, the
SO_BINDTODEVICE might either fail, or worse, it might bind to the wrong
device.
In most cases user-space only ever operates on devices which they
either manage themselves, or otherwise have a guarantee that the device
name will not change (e.g., devices that are UP cannot be renamed).
However, particularly in libraries this guarantee is non-obvious and it
would be nice if that race-condition would simply not exist. It would
make it easier for those libraries to operate even in situations where
the device-name might change under the hood.
A real use-case that we recently hit is trying to start the network
stack early in the initrd but make it survive into the real system.
Existing distributions rename network-interfaces during the transition
from initrd into the real system. This, obviously, cannot affect
devices that are up and running (unless you also consider moving them
between network-namespaces). However, the network manager now has to
make sure its management engine for dormant devices will not run in
parallel to these renames. Particularly, when you offload operations
like DHCP into separate processes, these might setup their sockets
early, and thus have to resolve the device-name possibly running into
this race-condition.
By avoiding a call to resolve the device-name, we no longer depend on
the name and can run network setup of dormant devices in parallel to
the transition off the initrd. The SO_BINDTOIFINDEX ioctl plugs this
race.
Reviewed-by: Tom Gundersen <teg@jklm.no>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To allow building this driver in compile test we need to remove all
dependency on headers from arch/mips/include. To allow this we
explicitly define all the registers locally instead of using
ar71xx_regs.h and we move the platform data struct definition to
include/linux/platform_data/spi-ath79.h.
Signed-off-by: Alban Bedel <albeu@free.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 62cac480f3 ("MIPS: kexec: Make a framework for both jumping and
halting on nonboot CPUs") broke the build of the OCTEON platform as
the relocated_kexec_smp_wait() is now static and not longer exported in
kexec.h.
Replace it by kexec_reboot() like it has been done in other places.
Fixes: 62cac480f3 ("MIPS: kexec: Make a framework for both jumping and halting on nonboot CPUs")
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Dengcheng Zhu <dzhu@wavecomp.com>
Cc: ralf@linux-mips.org
Cc: stable@vger.kernel.org # 4.20+
While reading through the sysvipc implementation, I noticed that the n32
semctl/shmctl/msgctl system calls behave differently based on whether
o32 support is enabled or not: Without o32, the IPC_64 flag passed by
user space is rejected but calls without that flag get IPC_64 behavior.
As far as I can tell, this was inadvertently changed by a cleanup patch
but never noticed by anyone, possibly nobody has tried using sysvipc
on n32 after linux-3.19.
Change it back to the old behavior now.
Fixes: 78aaf956ba ("MIPS: Compat: Fix build error if CONFIG_MIPS32_COMPAT but no compat ABI.")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: stable@vger.kernel.org # 3.19+
Octeon has an boot-time option to disable pcie.
Since MSI depends on PCI-E, we should also disable MSI also with
this option is on in order to avoid inadvertently accessing PCIe
registers.
Signed-off-by: YunQiang Su <ysu@wavecomp.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: pburton@wavecomp.com
Cc: linux-mips@vger.kernel.org
Cc: aaro.koskinen@iki.fi
Cc: stable@vger.kernel.org # v3.3+
64bit JAZZ builds failed with
linux-next/arch/mips/jazz/jazzdma.c: In function `vdma_init`:
/linux-next/arch/mips/jazz/jazzdma.c:77:30: error: implicit declaration
of function `KSEG1ADDR`; did you mean `CKSEG1ADDR`?
[-Werror=implicit-function-declaration]
pgtbl = (VDMA_PGTBL_ENTRY *)KSEG1ADDR(pgtbl);
^~~~~~~~~
CKSEG1ADDR
/linux-next/arch/mips/jazz/jazzdma.c:77:10: error: cast to pointer from
integer of different size [-Werror=int-to-pointer-cast]
pgtbl = (VDMA_PGTBL_ENTRY *)KSEG1ADDR(pgtbl);
^
In file included from /linux-next/arch/mips/include/asm/barrier.h:11:0,
from /linux-next/include/linux/compiler.h:248,
from /linux-next/include/linux/kernel.h:10,
from /linux-next/arch/mips/jazz/jazzdma.c:11:
/linux-next/arch/mips/include/asm/addrspace.h:41:29: error: cast from
pointer to integer of different size [-Werror=pointer-to-int-cast]
#define _ACAST32_ (_ATYPE_)(_ATYPE32_) /* widen if necessary */
^
/linux-next/arch/mips/include/asm/addrspace.h:53:25: note: in
expansion of macro `_ACAST32_`
#define CPHYSADDR(a) ((_ACAST32_(a)) & 0x1fffffff)
^~~~~~~~~
/linux-next/arch/mips/jazz/jazzdma.c:84:44: note: in expansion of
macro `CPHYSADDR`
r4030_write_reg32(JAZZ_R4030_TRSTBL_BASE, CPHYSADDR(pgtbl));
Using correct casts and CKSEG1ADDR when dealing with the pgtbl setup
fixes this.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
We already need to zero out memory for dma_alloc_coherent(), as such
using dma_zalloc_coherent() is superflous. Phase it out.
This change was generated with the following Coccinelle SmPL patch:
@ replace_dma_zalloc_coherent @
expression dev, size, data, handle, flags;
@@
-dma_zalloc_coherent(dev, size, handle, flags)
+dma_alloc_coherent(dev, size, handle, flags)
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
[hch: re-ran the script on the latest tree]
Signed-off-by: Christoph Hellwig <hch@lst.de>
CONFIG_SERIAL_OF_PLATFORM is needed to get a working console on the OF
boards, enable it in the default config to get a working setup out of
the box.
Signed-off-by: Alban Bedel <albeu@free.fr>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-kernel@vger.kernel.org
Instead of using the lantiq specific MIPS_CPU_TIMER_IRQ use the generic
CP0_LEGACY_COMPARE_IRQ constant for the timer interrupt number.
MIPS_CPU_TIMER_IRQ was already defined to 7 for both supported SoC
families.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: jhogan@kernel.org
Cc: ralf@linux-mips.org
Cc: john@phrozen.org
Cc: linux-mips@linux-mips.org
Cc: linux-mips@vger.kernel.org
This makes SMP on the vrx200 work again, by removing all the MIPS CPU
interrupt specific code and making it fully use the generic MIPS CPU
interrupt controller.
The mti,cpu-interrupt-controller from irq-mips-cpu.c now handles the CPU
interrupts and also the IPI interrupts which are used to communication
between the CPUs in a SMP system. The generic interrupt code was
already used before but the interrupt vectors were overwritten again
when we called set_vi_handler() in the lantiq interrupt driver and we
also provided our own plat_irq_dispatch() function which overwrote the
weak generic implementation. Now the code uses the generic handler for
the MIPS CPU interrupts including the IPI interrupts and registers a
handler for the CPU interrupts which are handled by the lantiq ICU with
irq_set_chained_handler() which was already called before.
Calling the set_c0_status() function is also not needed any more because
the generic MIPS CPU interrupt already activates the needed bits.
Fixes: 1eed400435 ("MIPS: smp-mt: Use CPU interrupt controller IPI IRQ domain support")
Cc: stable@kernel.org # v4.12
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: jhogan@kernel.org
Cc: ralf@linux-mips.org
Cc: john@phrozen.org
Cc: linux-mips@linux-mips.org
Cc: linux-mips@vger.kernel.org
Now that Kbuild automatically creates asm-generic wrappers for missing
mandatory headers, it is redundant to list the same headers in
generic-y and mandatory-y.
Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
These comments are leftovers of commit fcc8487d47 ("uapi: export all
headers under uapi directories").
Prior to that commit, exported headers must be explicitly added to
header-y. Now, all headers under the uapi/ directories are exported.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, CONFIG_JUMP_LABEL just means "I _want_ to use jump label".
The jump label is controlled by HAVE_JUMP_LABEL, which is defined
like this:
#if defined(CC_HAVE_ASM_GOTO) && defined(CONFIG_JUMP_LABEL)
# define HAVE_JUMP_LABEL
#endif
We can improve this by testing 'asm goto' support in Kconfig, then
make JUMP_LABEL depend on CC_HAS_ASM_GOTO.
Ugly #ifdef HAVE_JUMP_LABEL will go away, and CONFIG_JUMP_LABEL will
match to the real kernel capability.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
- The Broadcom BCM63xx platform sees a fix for resetting the BCM6368
ethernet switch, and the removal of a platform device we've never had
a driver for.
- The Alchemy platform sees a few fixes for bitrot that occurred within
the past few cycles.
- We now enable vectored interrupt support for the MediaTek MT7620 SoC,
which makes sense since they're supported by the SoC but in this case
also works around a bug relating to the location of exception vectors
when using a recent version of U-Boot.
- The atomic64_fetch_*_relaxed() family of functions see a fix for a
regression in MIPS64 kernels since v4.19.
- Cavium Octeon III CN7xxx systems will now disable their RGMII
interfaces rather than attempt to enable them & warn about the lack of
support for doing so, as they did since initial CN7xxx ethernet
support was added in v4.7.
- The Microsemi/Microchip MSCC SoCs gain a MAINTAINERS entry.
- .mailmap now provides consistency for Dengcheng Zhu's name & current
email address.
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQRgLjeFAZEXQzy86/s+p5+stXUA3QUCXDEVXBUccGF1bC5idXJ0
b25AbWlwcy5jb20ACgkQPqefrLV1AN2F4QEA5lJSa7x2ZMjV/z/P174lotgsclrp
EtcIf/Jx3IekXmsA/0LhuuC+6l7bq1DJRolsgeuhPTRBUM+8lvs8KXDVhzsA
=ImMx
-----END PGP SIGNATURE-----
Merge tag 'mips_fixes_4.21_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Paul Burton:
"A few early MIPS fixes for 4.21:
- The Broadcom BCM63xx platform sees a fix for resetting the BCM6368
ethernet switch, and the removal of a platform device we've never
had a driver for.
- The Alchemy platform sees a few fixes for bitrot that occurred
within the past few cycles.
- We now enable vectored interrupt support for the MediaTek MT7620
SoC, which makes sense since they're supported by the SoC but in
this case also works around a bug relating to the location of
exception vectors when using a recent version of U-Boot.
- The atomic64_fetch_*_relaxed() family of functions see a fix for a
regression in MIPS64 kernels since v4.19.
- Cavium Octeon III CN7xxx systems will now disable their RGMII
interfaces rather than attempt to enable them & warn about the lack
of support for doing so, as they did since initial CN7xxx ethernet
support was added in v4.7.
- The Microsemi/Microchip MSCC SoCs gain a MAINTAINERS entry.
- .mailmap now provides consistency for Dengcheng Zhu's name &
current email address"
* tag 'mips_fixes_4.21_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: OCTEON: mark RGMII interface disabled on OCTEON III
MIPS: Fix a R10000_LLSC_WAR logic in atomic.h
MIPS: BCM63XX: drop unused and broken DSP platform device
mailmap: Update name spelling and email for Dengcheng Zhu
MIPS: ralink: Select CONFIG_CPU_MIPSR2_IRQ_VI on MT7620/8
MAINTAINERS: Add a maintainer for MSCC MIPS SoCs
MIPS: Alchemy: update dma masks for devboard devices
MIPS: Alchemy: update cpu-feature-overrides
MIPS: Alchemy: drop DB1000 IrDA support bits
MIPS: alchemy: cpu_all_mask is forbidden for clock event devices
MIPS: BCM63XX: fix switch core reset on BCM6368
Merge more updates from Andrew Morton:
- procfs updates
- various misc bits
- lib/ updates
- epoll updates
- autofs
- fatfs
- a few more MM bits
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (58 commits)
mm/page_io.c: fix polled swap page in
checkpatch: add Co-developed-by to signature tags
docs: fix Co-Developed-by docs
drivers/base/platform.c: kmemleak ignore a known leak
fs: don't open code lru_to_page()
fs/: remove caller signal_pending branch predictions
mm/: remove caller signal_pending branch predictions
arch/arc/mm/fault.c: remove caller signal_pending_branch predictions
kernel/sched/: remove caller signal_pending branch predictions
kernel/locking/mutex.c: remove caller signal_pending branch predictions
mm: select HAVE_MOVE_PMD on x86 for faster mremap
mm: speed up mremap by 20x on large regions
mm: treewide: remove unused address argument from pte_alloc functions
initramfs: cleanup incomplete rootfs
scripts/gdb: fix lx-version string output
kernel/kcov.c: mark write_comp_data() as notrace
kernel/sysctl: add panic_print into sysctl
panic: add options to print system info when panic happens
bfs: extra sanity checking and static inode bitmap
exec: separate MM_ANONPAGES and RLIMIT_STACK accounting
...
Patch series "Add support for fast mremap".
This series speeds up the mremap(2) syscall by copying page tables at
the PMD level even for non-THP systems. There is concern that the extra
'address' argument that mremap passes to pte_alloc may do something
subtle architecture related in the future that may make the scheme not
work. Also we find that there is no point in passing the 'address' to
pte_alloc since its unused. This patch therefore removes this argument
tree-wide resulting in a nice negative diff as well. Also ensuring
along the way that the enabled architectures do not do anything funky
with the 'address' argument that goes unnoticed by the optimization.
Build and boot tested on x86-64. Build tested on arm64. The config
enablement patch for arm64 will be posted in the future after more
testing.
The changes were obtained by applying the following Coccinelle script.
(thanks Julia for answering all Coccinelle questions!).
Following fix ups were done manually:
* Removal of address argument from pte_fragment_alloc
* Removal of pte_alloc_one_fast definitions from m68k and microblaze.
// Options: --include-headers --no-includes
// Note: I split the 'identifier fn' line, so if you are manually
// running it, please unsplit it so it runs for you.
virtual patch
@pte_alloc_func_def depends on patch exists@
identifier E2;
identifier fn =~
"^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$";
type T2;
@@
fn(...
- , T2 E2
)
{ ... }
@pte_alloc_func_proto_noarg depends on patch exists@
type T1, T2, T3, T4;
identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$";
@@
(
- T3 fn(T1, T2);
+ T3 fn(T1);
|
- T3 fn(T1, T2, T4);
+ T3 fn(T1, T2);
)
@pte_alloc_func_proto depends on patch exists@
identifier E1, E2, E4;
type T1, T2, T3, T4;
identifier fn =~
"^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$";
@@
(
- T3 fn(T1 E1, T2 E2);
+ T3 fn(T1 E1);
|
- T3 fn(T1 E1, T2 E2, T4 E4);
+ T3 fn(T1 E1, T2 E2);
)
@pte_alloc_func_call depends on patch exists@
expression E2;
identifier fn =~
"^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$";
@@
fn(...
-, E2
)
@pte_alloc_macro depends on patch exists@
identifier fn =~
"^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$";
identifier a, b, c;
expression e;
position p;
@@
(
- #define fn(a, b, c) e
+ #define fn(a, b) e
|
- #define fn(a, b) e
+ #define fn(a) e
)
Link: http://lkml.kernel.org/r/20181108181201.88826-2-joelaf@google.com
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Suggested-by: Kirill A. Shutemov <kirill@shutemov.name>
Acked-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When testing in userspace, UBSAN pointed out that shifting into the sign
bit is undefined behaviour. It doesn't really make sense to ask for the
highest set bit of a negative value, so just turn the argument type into
an unsigned int.
Some architectures (eg ppc) already had it declared as an unsigned int,
so I don't expect too many problems.
Link: http://lkml.kernel.org/r/20181105221117.31828-1-willy@infradead.org
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument
of the user address range verification function since we got rid of the
old racy i386-only code to walk page tables by hand.
It existed because the original 80386 would not honor the write protect
bit when in kernel mode, so you had to do COW by hand before doing any
user access. But we haven't supported that in a long time, and these
days the 'type' argument is a purely historical artifact.
A discussion about extending 'user_access_begin()' to do the range
checking resulted this patch, because there is no way we're going to
move the old VERIFY_xyz interface to that model. And it's best done at
the end of the merge window when I've done most of my merges, so let's
just get this done once and for all.
This patch was mostly done with a sed-script, with manual fix-ups for
the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form.
There were a couple of notable cases:
- csky still had the old "verify_area()" name as an alias.
- the iter_iov code had magical hardcoded knowledge of the actual
values of VERIFY_{READ,WRITE} (not that they mattered, since nothing
really used it)
- microblaze used the type argument for a debug printout
but other than those oddities this should be a total no-op patch.
I tried to fix up all architectures, did fairly extensive grepping for
access_ok() uses, and the changes are trivial, but I may have missed
something. Any missed conversion should be trivially fixable, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 885872b722 ("MIPS: Octeon: Add Octeon III CN7xxx
interface detection") added RGMII interface detection for OCTEON III,
but it results in the following logs:
[ 7.165984] ERROR: Unsupported Octeon model in __cvmx_helper_rgmii_probe
[ 7.173017] ERROR: Unsupported Octeon model in __cvmx_helper_rgmii_probe
The current RGMII routines are valid only for older OCTEONS that
use GMX/ASX hardware blocks. On later chips AGL should be used,
but support for that is missing in the mainline. Until that is added,
mark the interface as disabled.
Fixes: 885872b722 ("MIPS: Octeon: Add Octeon III CN7xxx interface detection")
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: stable@vger.kernel.org # 4.7+
Mostly clean ups although whilst Doug's was chasing down a odd
lockdep warning he also did some work to improved debugger resilience
when some CPUs fail to respond to the round up request.
The main changes are:
* Fixing a lockdep warning on architectures that cannot use an NMI for
the round up plus related changes to make CPU round up and all CPU
backtrace more resilient.
* Constify the arch ops tables
* A couple of other small clean ups
Two of the three patchsets here include changes that spill over into
arch/. Changes in the arch space are relatively narrow in scope
(and directly related to kgdb). Didn't get comprehensive acks but
all impacted maintainers were Cc:ed in good time.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
-----BEGIN PGP SIGNATURE-----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=Aqlc
-----END PGP SIGNATURE-----
Merge tag 'kgdb-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux
Pull kgdb updates from Daniel Thompson:
"Mostly clean ups although while Doug's was chasing down a odd lockdep
warning he also did some work to improved debugger resilience when
some CPUs fail to respond to the round up request.
The main changes are:
- Fixing a lockdep warning on architectures that cannot use an NMI
for the round up plus related changes to make CPU round up and all
CPU backtrace more resilient.
- Constify the arch ops tables
- A couple of other small clean ups
Two of the three patchsets here include changes that spill over into
arch/. Changes in the arch space are relatively narrow in scope (and
directly related to kgdb). Didn't get comprehensive acks but all
impacted maintainers were Cc:ed in good time"
* tag 'kgdb-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
kgdb/treewide: constify struct kgdb_arch arch_kgdb_ops
mips/kgdb: prepare arch_kgdb_ops for constness
kdb: use bool for binary state indicators
kdb: Don't back trace on a cpu that didn't round up
kgdb: Don't round up a CPU that failed rounding up before
kgdb: Fix kgdb_roundup_cpus() for arches who used smp_call_function()
kgdb: Remove irq flags from roundup
Commit 4936084c2e ("MIPS: Cleanup R10000_LLSC_WAR logic in atomic.h")
introduce a mistake in atomic64_fetch_##op##_relaxed(), because it
forget to delete R10000_LLSC_WAR in the if-condition. So fix it.
Fixes: 4936084c2e ("MIPS: Cleanup R10000_LLSC_WAR logic in atomic.h")
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Joshua Kinard <kumba@gentoo.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Steven J . Hill <Steven.Hill@cavium.com>
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # 4.19+
Trying to register the DSP platform device results in a null pointer
access:
[ 0.124184] CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 804e305c, ra == 804e6f20
[ 0.135208] Oops[#1]:
[ 0.137514] CPU: 0 PID: 1 Comm: swapper Not tainted 4.14.87
...
[ 0.197117] epc : 804e305c bcm63xx_dsp_register+0x80/0xa4
[ 0.202838] ra : 804e6f20 board_register_devices+0x258/0x390
...
This happens because it tries to copy the passed platform data over the
platform_device's unpopulated platform_data.
Since this code has been broken since its submission, no driver was ever
submitted for it, and apparently nobody was using it, just remove it
instead of trying to fix it.
Fixes: e7300d04bd ("MIPS: BCM63xx: Add support for the Broadcom BCM63xx family of SOCs.")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
checkpatch.pl reports the following:
WARNING: struct kgdb_arch should normally be const
#28: FILE: arch/mips/kernel/kgdb.c:397:
+struct kgdb_arch arch_kgdb_ops = {
This report makes sense, as all other ops struct, this
one should also be const. This patch does the change.
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Rich Felker <dalias@libc.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: x86@kernel.org
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
MIPS is the only architecture modifying arch_kgdb_ops during init.
This patch makes the init static, so that it can be changed to
const in following patch, as recommended by checkpatch.pl
Suggested-by: Paul Burton <paul.burton@mips.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
When I had lockdep turned on and dropped into kgdb I got a nice splat
on my system. Specifically it hit:
DEBUG_LOCKS_WARN_ON(current->hardirq_context)
Specifically it looked like this:
sysrq: SysRq : DEBUG
------------[ cut here ]------------
DEBUG_LOCKS_WARN_ON(current->hardirq_context)
WARNING: CPU: 0 PID: 0 at .../kernel/locking/lockdep.c:2875 lockdep_hardirqs_on+0xf0/0x160
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.0 #27
pstate: 604003c9 (nZCv DAIF +PAN -UAO)
pc : lockdep_hardirqs_on+0xf0/0x160
...
Call trace:
lockdep_hardirqs_on+0xf0/0x160
trace_hardirqs_on+0x188/0x1ac
kgdb_roundup_cpus+0x14/0x3c
kgdb_cpu_enter+0x53c/0x5cc
kgdb_handle_exception+0x180/0x1d4
kgdb_compiled_brk_fn+0x30/0x3c
brk_handler+0x134/0x178
do_debug_exception+0xfc/0x178
el1_dbg+0x18/0x78
kgdb_breakpoint+0x34/0x58
sysrq_handle_dbg+0x54/0x5c
__handle_sysrq+0x114/0x21c
handle_sysrq+0x30/0x3c
qcom_geni_serial_isr+0x2dc/0x30c
...
...
irq event stamp: ...45
hardirqs last enabled at (...44): [...] __do_softirq+0xd8/0x4e4
hardirqs last disabled at (...45): [...] el1_irq+0x74/0x130
softirqs last enabled at (...42): [...] _local_bh_enable+0x2c/0x34
softirqs last disabled at (...43): [...] irq_exit+0xa8/0x100
---[ end trace adf21f830c46e638 ]---
Looking closely at it, it seems like a really bad idea to be calling
local_irq_enable() in kgdb_roundup_cpus(). If nothing else that seems
like it could violate spinlock semantics and cause a deadlock.
Instead, let's use a private csd alongside
smp_call_function_single_async() to round up the other CPUs. Using
smp_call_function_single_async() doesn't require interrupts to be
enabled so we can remove the offending bit of code.
In order to avoid duplicating this across all the architectures that
use the default kgdb_roundup_cpus(), we'll add a "weak" implementation
to debug_core.c.
Looking at all the people who previously had copies of this code,
there were a few variants. I've attempted to keep the variants
working like they used to. Specifically:
* For arch/arc we passed NULL to kgdb_nmicallback() instead of
get_irq_regs().
* For arch/mips there was a bit of extra code around
kgdb_nmicallback()
NOTE: In this patch we will still get into trouble if we try to round
up a CPU that failed to round up before. We'll try to round it up
again and potentially hang when we try to grab the csd lock. That's
not new behavior but we'll still try to do better in a future patch.
Suggested-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
The function kgdb_roundup_cpus() was passed a parameter that was
documented as:
> the flags that will be used when restoring the interrupts. There is
> local_irq_save() call before kgdb_roundup_cpus().
Nobody used those flags. Anyone who wanted to temporarily turn on
interrupts just did local_irq_enable() and local_irq_disable() without
looking at them. So we can definitely remove the flags.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Consolidation of bus (PCI, PCMCIA, EISA, RapidIO) config entries
by Christoph Hellwig.
Currently, every architecture that wants to provide common peripheral
busses needs to add some boilerplate code and include the right Kconfig
files. This series instead just selects the presence (when needed) and
then handles everything in the bus-specific Kconfig file under drivers/.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=WxId
-----END PGP SIGNATURE-----
Merge tag 'kconfig-v4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kconfig file consolidation from Masahiro Yamada:
"Consolidation of bus (PCI, PCMCIA, EISA, RapidIO) config entries by
Christoph Hellwig.
Currently, every architecture that wants to provide common peripheral
busses needs to add some boilerplate code and include the right
Kconfig files. This series instead just selects the presence (when
needed) and then handles everything in the bus-specific Kconfig file
under drivers/"
* tag 'kconfig-v4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
pcmcia: remove per-arch PCMCIA config entry
eisa: consolidate EISA Kconfig entry in drivers/eisa
rapidio: consolidate RAPIDIO config entry in drivers/rapidio
pcmcia: allow PCMCIA support independent of the architecture
PCI: consolidate the PCI_SYSCALL symbol
PCI: consolidate the PCI_DOMAINS and PCI_DOMAINS_GENERIC config options
PCI: consolidate PCI config entry in drivers/pci
MIPS: remove the HT_PCI config option
- support -y option for merge_config.sh to avoid downgrading =y to =m
- remove S_OTHER symbol type, and touch include/config/*.h files correctly
- fix file name and line number in lexer warnings
- fix memory leak when EOF is encountered in quotation
- resolve all shift/reduce conflicts of the parser
- warn no new line at end of file
- make 'source' statement more strict to take only string literal
- rewrite the lexer and remove the keyword lookup table
- convert to SPDX License Identifier
- compile C files independently instead of including them from zconf.y
- fix various warnings of gconfig
- misc cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=r3Fl
-----END PGP SIGNATURE-----
Merge tag 'kconfig-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kconfig updates from Masahiro Yamada:
- support -y option for merge_config.sh to avoid downgrading =y to =m
- remove S_OTHER symbol type, and touch include/config/*.h files correctly
- fix file name and line number in lexer warnings
- fix memory leak when EOF is encountered in quotation
- resolve all shift/reduce conflicts of the parser
- warn no new line at end of file
- make 'source' statement more strict to take only string literal
- rewrite the lexer and remove the keyword lookup table
- convert to SPDX License Identifier
- compile C files independently instead of including them from zconf.y
- fix various warnings of gconfig
- misc cleanups
* tag 'kconfig-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits)
kconfig: surround dbg_sym_flags with #ifdef DEBUG to fix gconf warning
kconfig: split images.c out of qconf.cc/gconf.c to fix gconf warnings
kconfig: add static qualifiers to fix gconf warnings
kconfig: split the lexer out of zconf.y
kconfig: split some C files out of zconf.y
kconfig: convert to SPDX License Identifier
kconfig: remove keyword lookup table entirely
kconfig: update current_pos in the second lexer
kconfig: switch to ASSIGN_VAL state in the second lexer
kconfig: stop associating kconf_id with yylval
kconfig: refactor end token rules
kconfig: stop supporting '.' and '/' in unquoted words
treewide: surround Kconfig file paths with double quotes
microblaze: surround string default in Kconfig with double quotes
kconfig: use T_WORD instead of T_VARIABLE for variables
kconfig: use specific tokens instead of T_ASSIGN for assignments
kconfig: refactor scanning and parsing "option" properties
kconfig: use distinct tokens for type and default properties
kconfig: remove redundant token defines
kconfig: rename depends_list to comment_option_list
...
- Cleanup BKOPS support
- Introduce MMC_CAP_SYNC_RUNTIME_PM
- slot-gpio: Delete legacy slot GPIO handling
MMC host:
- alcor: Add new mmc host driver for Alcor Micro PCI based cardreader
- bcm2835: Several improvements to better recover from errors
- jz4740: Rework and fixup pre|post_req support
- mediatek: Add support for SDIO IRQs
- meson-gx: Improve clock phase management
- meson-gx: Stop descriptor on errors
- mmci: Complete the sbc error path by sending a stop command
- renesas_sdhi/tmio: Fixup reset/resume operations
- renesas_sdhi: Add support for r8a774c0 and R7S9210
- renesas_sdhi: Whitelist R8A77990 SDHI
- renesas_sdhi: Fixup eMMC HS400 compatibility issues for H3 and M3-W
- rtsx_usb_sdmmc: Re-work card detection/removal support
- rtsx_usb_sdmmc: Re-work runtime PM support
- sdhci: Fix timeout loops for some variant drivers
- sdhci: Improve support for error handling due to failing commands
- sdhci-acpi/pci: Disable LED control for Intel BYT-based controllers
- sdhci_am654: Add new SDHCI variant driver to support TI's AM654 SOCs
- sdhci-of-esdhc: Add support for eMMC HS400 mode
- sdhci-omap: Fixup reset support
- sdhci-omap: Workaround errata regarding SDR104/HS200 tuning failures
- sdhci-msm: Fixup sporadic write transfers issues for SDR104/HS200
- sdhci-msm: Fixup dynamical clock gating issues
- various: Complete converting all hosts into using slot GPIO descriptors
Other:
- Move GPIO mmc platform data for mips/sh/arm to GPIO descriptors
- Add new Alcor Micro cardreader PCI driver
- Support runtime power management for memstick rtsx_usb_ms driver
- Use USB remote wakeups for card detection for rtsx_usb misc driver
-----BEGIN PGP SIGNATURE-----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=mB5P
-----END PGP SIGNATURE-----
Merge tag 'mmc-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"This time, this pull request contains changes crossing subsystems and
archs/platforms, which is mainly because of a bigger modernization of
moving from legacy GPIO to GPIO descriptors for MMC (by Linus
Walleij).
Additionally, once again, I am funneling changes to
drivers/misc/cardreader/* and drivers/memstick/* through my MMC tree,
mostly due to that we lack a maintainer for these.
Summary:
MMC core:
- Cleanup BKOPS support
- Introduce MMC_CAP_SYNC_RUNTIME_PM
- slot-gpio: Delete legacy slot GPIO handling
MMC host:
- alcor: Add new mmc host driver for Alcor Micro PCI based cardreader
- bcm2835: Several improvements to better recover from errors
- jz4740: Rework and fixup pre|post_req support
- mediatek: Add support for SDIO IRQs
- meson-gx: Improve clock phase management
- meson-gx: Stop descriptor on errors
- mmci: Complete the sbc error path by sending a stop command
- renesas_sdhi/tmio: Fixup reset/resume operations
- renesas_sdhi: Add support for r8a774c0 and R7S9210
- renesas_sdhi: Whitelist R8A77990 SDHI
- renesas_sdhi: Fixup eMMC HS400 compatibility issues for H3 and M3-W
- rtsx_usb_sdmmc: Re-work card detection/removal support
- rtsx_usb_sdmmc: Re-work runtime PM support
- sdhci: Fix timeout loops for some variant drivers
- sdhci: Improve support for error handling due to failing commands
- sdhci-acpi/pci: Disable LED control for Intel BYT-based controllers
- sdhci_am654: Add new SDHCI variant driver to support TI's AM654 SOCs
- sdhci-of-esdhc: Add support for eMMC HS400 mode
- sdhci-omap: Fixup reset support
- sdhci-omap: Workaround errata regarding SDR104/HS200 tuning failures
- sdhci-msm: Fixup sporadic write transfers issues for SDR104/HS200
- sdhci-msm: Fixup dynamical clock gating issues
- various: Complete converting all hosts into using slot GPIO descriptors
Other:
- Move GPIO mmc platform data for mips/sh/arm to GPIO descriptors
- Add new Alcor Micro cardreader PCI driver
- Support runtime power management for memstick rtsx_usb_ms driver
- Use USB remote wakeups for card detection for rtsx_usb misc driver"
* tag 'mmc-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (99 commits)
mmc: mediatek: Add MMC_CAP_SDIO_IRQ support
mmc: renesas_sdhi_internal_dmac: Whitelist r8a774c0
dt-bindings: mmc: renesas_sdhi: Add r8a774c0 support
mmc: core: Cleanup BKOPS support
mmc: core: Drop redundant check in mmc_send_hpi_cmd()
mmc: sdhci-omap: Workaround errata regarding SDR104/HS200 tuning failures (i929)
dt-bindings: sdhci-omap: Add note for cpu_thermal
mmc: sdhci-acpi: Disable LED control for Intel BYT-based controllers
mmc: sdhci-pci: Disable LED control for Intel BYT-based controllers
mmc: sdhci: Add quirk to disable LED control
mmc: mmci: add variant property to set command stop bit
misc: alcor_pci: fix spelling mistake "invailid" -> "invalid"
mmc: meson-gx: add signal resampling
mmc: meson-gx: align default phase on soc vendor tree
mmc: meson-gx: remove useless lock
mmc: meson-gx: make sure the descriptor is stopped on errors
mmc: sdhci_am654: Add Initial Support for AM654 SDHCI driver
dt-bindings: mmc: sdhci-of-arasan: Add deprecated message for AM65
dt-bindings: mmc: sdhci-am654: Document bindings for the host controllers on TI's AM654 SOCs
mmc: sdhci-msm: avoid unused function warning
...
A huge update this time, but a lot of that is just consolidating or
removing code:
- provide a common DMA_MAPPING_ERROR definition and avoid indirect
calls for dma_map_* error checking
- use direct calls for the DMA direct mapping case, avoiding huge
retpoline overhead for high performance workloads
- merge the swiotlb dma_map_ops into dma-direct
- provide a generic remapping DMA consistent allocator for architectures
that have devices that perform DMA that is not cache coherent. Based
on the existing arm64 implementation and also used for csky now.
- improve the dma-debug infrastructure, including dynamic allocation
of entries (Robin Murphy)
- default to providing chaining scatterlist everywhere, with opt-outs
for the few architectures (alpha, parisc, most arm32 variants) that
can't cope with it
- misc sparc32 dma-related cleanups
- remove the dma_mark_clean arch hook used by swiotlb on ia64 and
replace it with the generic noncoherent infrastructure
- fix the return type of dma_set_max_seg_size (Niklas Söderlund)
- move the dummy dma ops for not DMA capable devices from arm64 to
common code (Robin Murphy)
- ensure dma_alloc_coherent returns zeroed memory to avoid kernel data
leaks through userspace. We already did this for most common
architectures, but this ensures we do it everywhere.
dma_zalloc_coherent has been deprecated and can hopefully be
removed after -rc1 with a coccinelle script.
-----BEGIN PGP SIGNATURE-----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=in72
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-4.21' of git://git.infradead.org/users/hch/dma-mapping
Pull DMA mapping updates from Christoph Hellwig:
"A huge update this time, but a lot of that is just consolidating or
removing code:
- provide a common DMA_MAPPING_ERROR definition and avoid indirect
calls for dma_map_* error checking
- use direct calls for the DMA direct mapping case, avoiding huge
retpoline overhead for high performance workloads
- merge the swiotlb dma_map_ops into dma-direct
- provide a generic remapping DMA consistent allocator for
architectures that have devices that perform DMA that is not cache
coherent. Based on the existing arm64 implementation and also used
for csky now.
- improve the dma-debug infrastructure, including dynamic allocation
of entries (Robin Murphy)
- default to providing chaining scatterlist everywhere, with opt-outs
for the few architectures (alpha, parisc, most arm32 variants) that
can't cope with it
- misc sparc32 dma-related cleanups
- remove the dma_mark_clean arch hook used by swiotlb on ia64 and
replace it with the generic noncoherent infrastructure
- fix the return type of dma_set_max_seg_size (Niklas Söderlund)
- move the dummy dma ops for not DMA capable devices from arm64 to
common code (Robin Murphy)
- ensure dma_alloc_coherent returns zeroed memory to avoid kernel
data leaks through userspace. We already did this for most common
architectures, but this ensures we do it everywhere.
dma_zalloc_coherent has been deprecated and can hopefully be
removed after -rc1 with a coccinelle script"
* tag 'dma-mapping-4.21' of git://git.infradead.org/users/hch/dma-mapping: (73 commits)
dma-mapping: fix inverted logic in dma_supported
dma-mapping: deprecate dma_zalloc_coherent
dma-mapping: zero memory returned from dma_alloc_*
sparc/iommu: fix ->map_sg return value
sparc/io-unit: fix ->map_sg return value
arm64: default to the direct mapping in get_arch_dma_ops
PCI: Remove unused attr variable in pci_dma_configure
ia64: only select ARCH_HAS_DMA_COHERENT_TO_PFN if swiotlb is enabled
dma-mapping: bypass indirect calls for dma-direct
vmd: use the proper dma_* APIs instead of direct methods calls
dma-direct: merge swiotlb_dma_ops into the dma_direct code
dma-direct: use dma_direct_map_page to implement dma_direct_map_sg
dma-direct: improve addressability error reporting
swiotlb: remove dma_mark_clean
swiotlb: remove SWIOTLB_MAP_ERROR
ACPI / scan: Refactor _CCA enforcement
dma-mapping: factor out dummy DMA ops
dma-mapping: always build the direct mapping code
dma-mapping: move dma_cache_sync out of line
dma-mapping: move various slow path functions out of line
...
-----BEGIN PGP SIGNATURE-----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=+PqW
-----END PGP SIGNATURE-----
Merge tag 'for-4.21/libata-20181221' of git://git.kernel.dk/linux-block
Pull libata updates from Jens Axboe:
"Here are the libata changes for this merge window. Nothing major in
here. This contains:
- GPIO descriptor conversions (Linus Walleij)
- rcar deferred probing fix (Sergei Shtylyov)"
* tag 'for-4.21/libata-20181221' of git://git.kernel.dk/linux-block:
sata_rcar: fix deferred probing
ata: palmld: Introduce state container
ata: palmld: Convert to GPIO descriptors
ata: rb532_cf: Convert to use GPIO descriptors
ata: sata_highbank: Convert to use GPIO descriptors
ata: pxa: Drop <linux/gpio.h> include
Pull networking updates from David Miller:
1) New ipset extensions for matching on destination MAC addresses, from
Stefano Brivio.
2) Add ipv4 ttl and tos, plus ipv6 flow label and hop limit offloads to
nfp driver. From Stefano Brivio.
3) Implement GRO for plain UDP sockets, from Paolo Abeni.
4) Lots of work from Michał Mirosław to eliminate the VLAN_TAG_PRESENT
bit so that we could support the entire vlan_tci value.
5) Rework the IPSEC policy lookups to better optimize more usecases,
from Florian Westphal.
6) Infrastructure changes eliminating direct manipulation of SKB lists
wherever possible, and to always use the appropriate SKB list
helpers. This work is still ongoing...
7) Lots of PHY driver and state machine improvements and
simplifications, from Heiner Kallweit.
8) Various TSO deferral refinements, from Eric Dumazet.
9) Add ntuple filter support to aquantia driver, from Dmitry Bogdanov.
10) Batch dropping of XDP packets in tuntap, from Jason Wang.
11) Lots of cleanups and improvements to the r8169 driver from Heiner
Kallweit, including support for ->xmit_more. This driver has been
getting some much needed love since he started working on it.
12) Lots of new forwarding selftests from Petr Machata.
13) Enable VXLAN learning in mlxsw driver, from Ido Schimmel.
14) Packed ring support for virtio, from Tiwei Bie.
15) Add new Aquantia AQtion USB driver, from Dmitry Bezrukov.
16) Add XDP support to dpaa2-eth driver, from Ioana Ciocoi Radulescu.
17) Implement coalescing on TCP backlog queue, from Eric Dumazet.
18) Implement carrier change in tun driver, from Nicolas Dichtel.
19) Support msg_zerocopy in UDP, from Willem de Bruijn.
20) Significantly improve garbage collection of neighbor objects when
the table has many PERMANENT entries, from David Ahern.
21) Remove egdev usage from nfp and mlx5, and remove the facility
completely from the tree as it no longer has any users. From Oz
Shlomo and others.
22) Add a NETDEV_PRE_CHANGEADDR so that drivers can veto the change and
therefore abort the operation before the commit phase (which is the
NETDEV_CHANGEADDR event). From Petr Machata.
23) Add indirect call wrappers to avoid retpoline overhead, and use them
in the GRO code paths. From Paolo Abeni.
24) Add support for netlink FDB get operations, from Roopa Prabhu.
25) Support bloom filter in mlxsw driver, from Nir Dotan.
26) Add SKB extension infrastructure. This consolidates the handling of
the auxiliary SKB data used by IPSEC and bridge netfilter, and is
designed to support the needs to MPTCP which could be integrated in
the future.
27) Lots of XDP TX optimizations in mlx5 from Tariq Toukan.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1845 commits)
net: dccp: fix kernel crash on module load
drivers/net: appletalk/cops: remove redundant if statement and mask
bnx2x: Fix NULL pointer dereference in bnx2x_del_all_vlans() on some hw
net/net_namespace: Check the return value of register_pernet_subsys()
net/netlink_compat: Fix a missing check of nla_parse_nested
ieee802154: lowpan_header_create check must check daddr
net/mlx4_core: drop useless LIST_HEAD
mlxsw: spectrum: drop useless LIST_HEAD
net/mlx5e: drop useless LIST_HEAD
iptunnel: Set tun_flags in the iptunnel_metadata_reply from src
net/mlx5e: fix semicolon.cocci warnings
staging: octeon: fix build failure with XFRM enabled
net: Revert recent Spectre-v1 patches.
can: af_can: Fix Spectre v1 vulnerability
packet: validate address length if non-zero
nfc: af_nfc: Fix Spectre v1 vulnerability
phonet: af_phonet: Fix Spectre v1 vulnerability
net: core: Fix Spectre v1 vulnerability
net: minor cleanup in skb_ext_add()
net: drop the unused helper skb_ext_get()
...
single-stepping fixes, improved tracing, various timer and vGIC
fixes
* x86: Processor Tracing virtualization, STIBP support, some correctness fixes,
refactorings and splitting of vmx.c, use the Hyper-V range TLB flush hypercall,
reduce order of vcpu struct, WBNOINVD support, do not use -ftrace for __noclone
functions, nested guest support for PAUSE filtering on AMD, more Hyper-V
enlightenments (direct mode for synthetic timers)
* PPC: nested VFIO
* s390: bugfixes only this time
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJcH0vFAAoJEL/70l94x66Dw/wH/2FZp1YOM5OgiJzgqnXyDbyf
dNEfWo472MtNiLsuf+ZAfJojVIu9cv7wtBfXNzW+75XZDfh/J88geHWNSiZDm3Fe
aM4MOnGG0yF3hQrRQyEHe4IFhGFNERax8Ccv+OL44md9CjYrIrsGkRD08qwb+gNh
P8T/3wJEKwUcVHA/1VHEIM8MlirxNENc78p6JKd/C7zb0emjGavdIpWFUMr3SNfs
CemabhJUuwOYtwjRInyx1y34FzYwW3Ejuc9a9UoZ+COahUfkuxHE8u+EQS7vLVF6
2VGVu5SA0PqgmLlGhHthxLqVgQYo+dB22cRnsLtXlUChtVAq8q9uu5sKzvqEzuE=
=b4Jx
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"ARM:
- selftests improvements
- large PUD support for HugeTLB
- single-stepping fixes
- improved tracing
- various timer and vGIC fixes
x86:
- Processor Tracing virtualization
- STIBP support
- some correctness fixes
- refactorings and splitting of vmx.c
- use the Hyper-V range TLB flush hypercall
- reduce order of vcpu struct
- WBNOINVD support
- do not use -ftrace for __noclone functions
- nested guest support for PAUSE filtering on AMD
- more Hyper-V enlightenments (direct mode for synthetic timers)
PPC:
- nested VFIO
s390:
- bugfixes only this time"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (171 commits)
KVM: x86: Add CPUID support for new instruction WBNOINVD
kvm: selftests: ucall: fix exit mmio address guessing
Revert "compiler-gcc: disable -ftracer for __noclone functions"
KVM: VMX: Move VM-Enter + VM-Exit handling to non-inline sub-routines
KVM: VMX: Explicitly reference RCX as the vmx_vcpu pointer in asm blobs
KVM: x86: Use jmp to invoke kvm_spurious_fault() from .fixup
MAINTAINERS: Add arch/x86/kvm sub-directories to existing KVM/x86 entry
KVM/x86: Use SVM assembly instruction mnemonics instead of .byte streams
KVM/MMU: Flush tlb directly in the kvm_zap_gfn_range()
KVM/MMU: Flush tlb directly in kvm_set_pte_rmapp()
KVM/MMU: Move tlb flush in kvm_set_pte_rmapp() to kvm_mmu_notifier_change_pte()
KVM: Make kvm_set_spte_hva() return int
KVM: Replace old tlb flush function with new one to flush a specified range.
KVM/MMU: Add tlb flush with range helper function
KVM/VMX: Add hv tlb range flush support
x86/hyper-v: Add HvFlushGuestAddressList hypercall support
KVM: Add tlb_remote_flush_with_range callback in kvm_x86_ops
KVM: x86: Disable Intel PT when VMXON in L1 guest
KVM: x86: Set intercept for Intel PT MSRs read/write
KVM: x86: Implement Intel PT MSRs read/write emulation
...
include:
- Syscall tables & definitions for unistd.h are now generated by
scripts, providing greater consistency with other architectures &
making it easier to add new syscalls.
- Support for building kernels with no floating point support, upon
which any userland attempting to use floating point instructions will
receive a SIGILL. Mostly useful to shrink the kernel & as preparation
for nanoMIPS support which does not yet include FP.
- MIPS SIMD Architecture (MSA) vector register context is now exposed
by ptrace via a new NT_MIPS_MSA regset.
- ASIDs are now stored as 64b values even for MIPS32 kernels, expanding
the ASID version field sufficiently that we don't need to worry about
overflow & avoiding rare issues with reused ASIDs that have been
observed in the wild.
- The branch delay slot "emulation" page is now mapped without write
permission for the user, preventing its use as a nice location for
attacks to execute malicious code from.
- Support for ioremap_prot(), primarily to allow gdb or other
ptrace users the ability to view their tracee's memory using the same
cache coherency attribute.
- Optimizations to more cpu_has_* macros, allowing more to be
compile-time constant where possible.
- Enable building the whole kernel with UBSAN instrumentation.
- Enable building the kernel with link-time dead code & data
elimination.
Platform specific changes include:
- The Boston board gains a workaround for DMA prefetching issues with
the EG20T Platform Controller Hub that it uses.
- Cleanups to Cavium Octeon code removing about 20k lines of redundant
code, mostly unused or duplicate register definitions in headers.
- defconfig updates for the DECstation machines, including new
defconfigs for r4k & 64b machines.
- Further work on Loongson 3 support.
- DMA fixes for SiByte machines.
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQRgLjeFAZEXQzy86/s+p5+stXUA3QUCXB+vwBUccGF1bC5idXJ0
b25AbWlwcy5jb20ACgkQPqefrLV1AN3/EgD9Givei//X2oTd4w8HSe/uPeVkMnbA
93WMi1cS0EogAaUA/R7poLSnAE74mt+DT4PrGdQezUbXts9vUF/7VX0MvFIF
=hmtJ
-----END PGP SIGNATURE-----
Merge tag 'mips_4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Paul Burton:
"Here's the main MIPS pull for Linux 4.21. Core architecture changes
include:
- Syscall tables & definitions for unistd.h are now generated by
scripts, providing greater consistency with other architectures &
making it easier to add new syscalls.
- Support for building kernels with no floating point support, upon
which any userland attempting to use floating point instructions
will receive a SIGILL. Mostly useful to shrink the kernel & as
preparation for nanoMIPS support which does not yet include FP.
- MIPS SIMD Architecture (MSA) vector register context is now exposed
by ptrace via a new NT_MIPS_MSA regset.
- ASIDs are now stored as 64b values even for MIPS32 kernels,
expanding the ASID version field sufficiently that we don't need to
worry about overflow & avoiding rare issues with reused ASIDs that
have been observed in the wild.
- The branch delay slot "emulation" page is now mapped without write
permission for the user, preventing its use as a nice location for
attacks to execute malicious code from.
- Support for ioremap_prot(), primarily to allow gdb or other ptrace
users the ability to view their tracee's memory using the same
cache coherency attribute.
- Optimizations to more cpu_has_* macros, allowing more to be
compile-time constant where possible.
- Enable building the whole kernel with UBSAN instrumentation.
- Enable building the kernel with link-time dead code & data
elimination.
Platform specific changes include:
- The Boston board gains a workaround for DMA prefetching issues with
the EG20T Platform Controller Hub that it uses.
- Cleanups to Cavium Octeon code removing about 20k lines of
redundant code, mostly unused or duplicate register definitions in
headers.
- defconfig updates for the DECstation machines, including new
defconfigs for r4k & 64b machines.
- Further work on Loongson 3 support.
- DMA fixes for SiByte machines"
* tag 'mips_4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (95 commits)
MIPS: math-emu: Write-protect delay slot emulation pages
MIPS: Remove struct mm_context_t fp_mode_switching field
mips: generate uapi header and system call table files
mips: add system call table generation support
mips: remove syscall table entries
mips: add +1 to __NR_syscalls in uapi header
mips: rename scall64-64.S to scall64-n64.S
mips: remove unused macros
mips: add __NR_syscalls along with __NR_Linux_syscalls
MIPS: Expand MIPS32 ASIDs to 64 bits
MIPS: OCTEON: delete redundant register definitions
MIPS: OCTEON: cvmx_gmxx_inf_mode: use oldest forward compatible definition
MIPS: OCTEON: cvmx_mio_fus_dat3: use oldest forward compatible definition
MIPS: OCTEON: cvmx_pko_mem_debug8: use oldest forward compatible definition
MIPS: OCTEON: octeon-usb: use common gpio_bit definition
MIPS: OCTEON: enable all OCTEON drivers in defconfig
mips: annotate implicit fall throughs
MIPS: Hardcode cpu_has_mips* where target ISA allows
MIPS: MT: Remove norps command line parameter
MIPS: Only include mmzone.h when CONFIG_NEED_MULTIPLE_NODES=y
...
This converts the MTX-1 driver to grab a GPIO descriptor
associated with the device instead of using a resource with
a global GPIO number. Augment the driver and the boardfile.
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Paul Burton <paul.burton@mips.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Testing has shown, that when using mainline U-Boot on MT7688 based
boards, the system may hang or crash while mounting the root-fs. The
main issue here is that mainline U-Boot configures EBase to a value
near the end of system memory. And with CONFIG_CPU_MIPSR2_IRQ_VI
disabled, trap_init() will not allocate a new area to place the
exception handler. The original value will be used and the handler
will be copied to this location, which might already be used by some
userspace application.
The MT7688 supports VI - its config3 register is 0x00002420, so VInt
(Bit 5) is set. But without setting CONFIG_CPU_MIPSR2_IRQ_VI this
bit will not be evaluated to result in "cpu_has_vi" being set. This
patch now selects CONFIG_CPU_MIPSR2_IRQ_VI on MT7620/8 which results
trap_init() to allocate some memory for the exception handler.
Please note that this issue was not seen with the Mediatek U-Boot
version, as it does not touch EBase (stays at default of 0x8000.0000).
This is strictly also not correct as the kernel (_text) resides
here.
Signed-off-by: Stefan Roese <sr@denx.de>
[paul.burton@mips.com: s/beeing/being/]
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: John Crispin <blogic@openwrt.org>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Fix the DMA masks for sound and mmc devices.
Verified on DB1300 and DB1500.
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Linux-MIPS <linux-mips@vger.kernel.org>
No shiny new stuff for Alchemy.
Tested on DB1300 and DB1500.
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Linux-MIPS <linux-mips@vger.kernel.org>
The IrDA drivers are gone, drop the now unused DB1000 board
support for it.
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Linux-MIPS <linux-mips@vger.kernel.org>
change alchemy clock event device cpu_all_mask to cpu_possible_mask.
Gets rid of a warning, which then does the same substitution:
WARNING: CPU: 0 PID: 0 at kernel/time/clockevents.c:468 clockevents_register_device+0x130/0x140
rtcmatch2 cpumask == cpu_all_mask, using cpu_possible_mask instead
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Linux-MIPS <linux-mips@vger.kernel.org>
The Ethernet Switch core mask was set to 0, causing the switch core to
be not reset on BCM6368 on boot. Provide the proper mask so the switch
core gets reset to a known good state.
Fixes: 799faa626c ("MIPS: BCM63XX: add core reset helper")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
The Kconfig lexer supports special characters such as '.' and '/' in
the parameter context. In my understanding, the reason is just to
support bare file paths in the source statement.
I do not see a good reason to complicate Kconfig for the room of
ambiguity.
The majority of code already surrounds file paths with double quotes,
and it makes sense since file paths are constant string literals.
Make it treewide consistent now.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
The patch is to make kvm_set_spte_hva() return int and caller can
check return value to determine flush tlb or not.
Signed-off-by: Lan Tianyu <Tianyu.Lan@microsoft.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Mapping the delay slot emulation page as both writeable & executable
presents a security risk, in that if an exploit can write to & jump into
the page then it can be used as an easy way to execute arbitrary code.
Prevent this by mapping the page read-only for userland, and using
access_process_vm() with the FOLL_FORCE flag to write to it from
mips_dsemul().
This will likely be less efficient due to copy_to_user_page() performing
cache maintenance on a whole page, rather than a single line as in the
previous use of flush_cache_sigtramp(). However this delay slot
emulation code ought not to be running in any performance critical paths
anyway so this isn't really a problem, and we can probably do better in
copy_to_user_page() anyway in future.
A major advantage of this approach is that the fix is small & simple to
backport to stable kernels.
Reported-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: 432c6bacbd ("MIPS: Use per-mm page to execute branch delay slot instructions")
Cc: stable@vger.kernel.org # v4.8+
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Rich Felker <dalias@libc.org>
Cc: David Daney <david.daney@cavium.com>
The fp_mode_switching field in struct mm_context_t was left unused by
commit 8c8d953c28 ("MIPS: Schedule on CPUs we need to lose FPU for a
mode switch") in v4.19, with nothing modifying its value & nothing
waiting on it having any particular value after that commit. Remove the
unused field & the one remaining reference to it.
Signed-off-by: Paul Burton <paul.burton@mips.com>
The power GPIO line is passed with inversion flags and all from
the platform data. Switch to using an optional GPIO descriptor and
use this to switch the power.
Augment the only boardfile to pass in the proper "power" descriptor
in the GPIO descriptor machine table instead.
As the GPIO handling is now much simpler, we can cut down on some
overhead code.
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: linux-mips@linux-mips.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Modifty the JZ4740 driver to retrieve card detect and write
protect GPIO pins from GPIO descriptors instead of hard-coded
global numbers. Augment the only board file using this in the
process and cut down on passed in platform data.
Preserve the code setting the caps2 flags for CD and WP
as active low or high since the slot GPIO code currently
ignores the gpiolib polarity inversion semantice and uses
the raw accessors to read the GPIO lines, but set the right
polarity flags in the descriptor table for jz4740.
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: linux-mips@linux-mips.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
System call table generation script must be run to gener-
ate unistd_(nr_)n64/n32/o32.h and syscall_table_32_o32/
64_n64/64_n32/64-o32.h files. This patch will have changes
which will invokes the script.
This patch will generate unistd_(nr_)n64/n32/o32.h and
syscall_table_32_o32/64_n64/64-n32/64-o32.h files by the
syscall table generation script invoked by parisc/Make-
file and the generated files against the removed files
must be identical.
The generated uapi header file will be included in uapi/-
asm/unistd.h and generated system call table header file
will be included by kernel/scall32-o32/64-n64/64-n32/-
64-o32.Sfile.
Signed-off-by: Firoz Khan <firoz.khan@linaro.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: y2038@lists.linaro.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: arnd@arndb.de
Cc: deepa.kernel@gmail.com
Cc: marcin.juszkiewicz@linaro.org
The system call tables are in different format in all
architecture and it will be difficult to manually add,
modify or delete the syscall table entries in the res-
pective files. To make it easy by keeping a script and
which will generate the uapi header and syscall table
file. This change will also help to unify the implemen-
tation across all architectures.
The system call table generation script is added in
kernel/syscalls directory which contain the scripts to
generate both uapi header file and system call table
files. The syscall.tbl will be input for the scripts.
syscall.tbl contains the list of available system calls
along with system call number and corresponding entry
point. Add a new system call in this architecture will
be possible by adding new entry in the syscall.tbl file.
Adding a new table entry consisting of:
- System call number.
- ABI.
- System call name.
- Entry point name.
- Compat entry name, if required.
syscallhdr.sh, syscallnr.sh and syscalltbl.sh will gene-
rate uapi header unistd_n64/n32/o32.h, unistd_nr_n64/n32/-
o32.h and syscall_table_32_o32/64_n64/64-n32/64-o32.h files
respectively. All *.sh files will parse the content sys-
call.tbl to generate the header and table files. unistd-
_n64/n32/o32.h and unistd_nr_n64/n32/o32.h will be included
by uapi/asm/unistd.h and syscall_table_32_o32/64_n64/64-n32-
/64-o32.h is included by kernel/syscall_table32_o32/64-
_n64/64-n32/64-o32.S - the real system call table.
ARM, s390 and x86 architecuture does have similar support.
I leverage their implementation to come up with a generic
solution.
Signed-off-by: Firoz Khan <firoz.khan@linaro.org>
[paul.burton@mips.com:
- Change sysnr_pfx_unistd_nr_n64 to 64.]
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: y2038@lists.linaro.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: arnd@arndb.de
Cc: deepa.kernel@gmail.com
Cc: marcin.juszkiewicz@linaro.org
The config flag - CONFIG_MIPS_MT_FPAFF uses to check whether which
syscall entries need to be used in scall32-o32.S file.
One of the patch in this patch series will generate syscall table
file. But CONFIG_MIPS_MT_FPAFF flag will add more complexity in the
script to generate the syscall table file.
In order to come up with a common implementation across all archit-
ecture, we need to remove mipsmt_sys_sched_setaffinity and mipsmt-
_sys_sched_getaffinity from the table and define it in other way.
Signed-off-by: Firoz Khan <firoz.khan@linaro.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: y2038@lists.linaro.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: arnd@arndb.de
Cc: deepa.kernel@gmail.com
Cc: marcin.juszkiewicz@linaro.org
All other architectures are hold a value for __NR_syscalls will
be equal to the last system call number +1.
But in mips architecture, __NR_syscalls hold the value equal to
total number of system exits in the architecture. One of the
patch in this patch series will genarate uapi header files.
In order to make the implementation common across all architect-
ures, add +1 to __NR_syscalls, which will be equal to the last
system call number +1.
Signed-off-by: Firoz Khan <firoz.khan@linaro.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: y2038@lists.linaro.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: arnd@arndb.de
Cc: deepa.kernel@gmail.com
Cc: marcin.juszkiewicz@linaro.org
When we get nanoMIPS support we'll be introducing the p32
ABI, and there's a reasonable chance that the equivalent
p64 ABI may come along in the future. Using 'n64' now would
avoid confusion in that case where we may have 2 different
64-bit ABIs.
Suggested-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Firoz Khan <firoz.khan@linaro.org>
[paul.burton@mips.com:
- Remove UAPI macro renaming, github code search shows at least the
chromium project uses __NR_64_Linux & __NR_64_Linux_syscalls.]
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: y2038@lists.linaro.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: arnd@arndb.de
Cc: deepa.kernel@gmail.com
Cc: marcin.juszkiewicz@linaro.org
Remove __NR_Linux_syscalls from uapi/asm/unistd.h as
there is no users to use NR_syscalls macro in mips
kernel.
MAX_SYSCALL_NO can also remove as there is commit
2957c9e61e ("[MIPS] IRIX: Goodbye and thanks for
all the fish"), eight years ago.
Signed-off-by: Firoz Khan <firoz.khan@linaro.org>
[paul.burton@mips.com:
- Drop the removal of NR_syscalls which is used by
kernel/trace/trace.h.]
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: y2038@lists.linaro.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: arnd@arndb.de
Cc: deepa.kernel@gmail.com
Cc: marcin.juszkiewicz@linaro.org
There are two problems with KVM_GET_DIRTY_LOG. First, and less important,
it can take kvm->mmu_lock for an extended period of time. Second, its user
can actually see many false positives in some cases. The latter is due
to a benign race like this:
1. KVM_GET_DIRTY_LOG returns a set of dirty pages and write protects
them.
2. The guest modifies the pages, causing them to be marked ditry.
3. Userspace actually copies the pages.
4. KVM_GET_DIRTY_LOG returns those pages as dirty again, even though
they were not written to since (3).
This is especially a problem for large guests, where the time between
(1) and (3) can be substantial. This patch introduces a new
capability which, when enabled, makes KVM_GET_DIRTY_LOG not
write-protect the pages it returns. Instead, userspace has to
explicitly clear the dirty log bits just before using the content
of the page. The new KVM_CLEAR_DIRTY_LOG ioctl can also operate on a
64-page granularity rather than requiring to sync a full memslot;
this way, the mmu_lock is taken for small amounts of time, and
only a small amount of time will pass between write protection
of pages and the sending of their content.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When manual dirty log reprotect will be enabled, kvm_get_dirty_log_protect's
pointer argument will always be false on exit, because no TLB flush is needed
until the manual re-protection operation. Rename it from "is_dirty" to "flush",
which more accurately tells the caller what they have to do with it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Avoid expensive indirect calls in the fast path DMA mapping
operations by directly calling the dma_direct_* ops if we are using
the directly mapped DMA operations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
While the dma-direct code is (relatively) clean and simple we actually
have to use the swiotlb ops for the mapping on many architectures due
to devices with addressing limits. Instead of keeping two
implementations around this commit allows the dma-direct
implementation to call the swiotlb bounce buffering functions and
thus share the guts of the mapping implementation. This also
simplified the dma-mapping setup on a few architectures where we
don't have to differenciate which implementation to use.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
All architectures except for sparc64 use the dma-direct code in some
form, and even for sparc64 we had the discussion of a direct mapping
mode a while ago. In preparation for directly calling the direct
mapping code don't bother having it optionally but always build the
code in. This is a minor hardship for some powerpc and arm configs
that don't pull it in yet (although they should in a relase ot two),
and sparc64 which currently doesn't need it at all, but it will
reduce the ifdef mess we'd otherwise need significantly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
__NR_Linux_syscalls macro holds the number of system call
exist in mips architecture. We have to change the value of
__NR_Linux_syscalls, if we add or delete a system call.
One of the patch in this patch series has a script which
will generate a uapi header based on syscall.tbl file.
The syscall.tbl file contains the total number of system
calls information. So we have two option to update __NR-
_Linux_syscalls value.
1. Update __NR_Linux_syscalls in asm/unistd.h manually
by counting the no.of system calls. No need to update
__NR_Linux_syscalls until we either add a new system
call or delete existing system call.
2. We can keep this feature it above mentioned script,
that will count the number of syscalls and keep it in
a generated file. In this case we don't need to expli-
citly update __NR_Linux_syscalls in asm/unistd.h file.
The 2nd option will be the recommended one. For that, I
added the __NR_syscalls macro in uapi/asm/unistd.h along
with __NR_Linux_syscalls. The macro __NR_syscalls also
added for making the name convention same across all
architecture. While __NR_syscalls isn't strictly part of
the uapi, having it as part of the generated header to
simplifies the implementation. We also need to enclose
this macro with #ifdef __KERNEL__ to avoid side effects.
Signed-off-by: Firoz Khan <firoz.khan@linaro.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: y2038@lists.linaro.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: arnd@arndb.de
Cc: deepa.kernel@gmail.com
Cc: marcin.juszkiewicz@linaro.org
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-12-11
The following pull-request contains BPF updates for your *net-next* tree.
It has three minor merge conflicts, resolutions:
1) tools/testing/selftests/bpf/test_verifier.c
Take first chunk with alignment_prevented_execution.
2) net/core/filter.c
[...]
case bpf_ctx_range_ptr(struct __sk_buff, flow_keys):
case bpf_ctx_range(struct __sk_buff, wire_len):
return false;
[...]
3) include/uapi/linux/bpf.h
Take the second chunk for the two cases each.
The main changes are:
1) Add support for BPF line info via BTF and extend libbpf as well
as bpftool's program dump to annotate output with BPF C code to
facilitate debugging and introspection, from Martin.
2) Add support for BPF_ALU | BPF_ARSH | BPF_{K,X} in interpreter
and all JIT backends, from Jiong.
3) Improve BPF test coverage on archs with no efficient unaligned
access by adding an "any alignment" flag to the BPF program load
to forcefully disable verifier alignment checks, from David.
4) Add a new bpf_prog_test_run_xattr() API to libbpf which allows for
proper use of BPF_PROG_TEST_RUN with data_out, from Lorenz.
5) Extend tc BPF programs to use a new __sk_buff field called wire_len
for more accurate accounting of packets going to wire, from Petar.
6) Improve bpftool to allow dumping the trace pipe from it and add
several improvements in bash completion and map/prog dump,
from Quentin.
7) Optimize arm64 BPF JIT to always emit movn/movk/movk sequence for
kernel addresses and add a dedicated BPF JIT backend allocator,
from Ard.
8) Add a BPF helper function for IR remotes to report mouse movements,
from Sean.
9) Various cleanups in BPF prog dump e.g. to make UAPI bpf_prog_info
member naming consistent with existing conventions, from Yonghong
and Song.
10) Misc cleanups and improvements in allowing to pass interface name
via cmdline for xdp1 BPF example, from Matteo.
11) Fix a potential segfault in BPF sample loader's kprobes handling,
from Daniel T.
12) Fix SPDX license in libbpf's README.rst, from Andrey.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Several conflicts, seemingly all over the place.
I used Stephen Rothwell's sample resolutions for many of these, if not
just to double check my own work, so definitely the credit largely
goes to him.
The NFP conflict consisted of a bug fix (moving operations
past the rhashtable operation) while chaning the initial
argument in the function call in the moved code.
The net/dsa/master.c conflict had to do with a bug fix intermixing of
making dsa_master_set_mtu() static with the fixing of the tagging
attribute location.
cls_flower had a conflict because the dup reject fix from Or
overlapped with the addition of port range classifiction.
__set_phy_supported()'s conflict was relatively easy to resolve
because Andrew fixed it in both trees, so it was just a matter
of taking the net-next copy. Or at least I think it was :-)
Joe Stringer's fix to the handling of netns id 0 in bpf_sk_lookup()
intermixed with changes on how the sdif and caller_net are calculated
in these code paths in net-next.
The remaining BPF conflicts were largely about the addition of the
__bpf_md_ptr stuff in 'net' overlapping with adjustments and additions
to the relevant data structure where the MD pointer macros are used.
Signed-off-by: David S. Miller <davem@davemloft.net>
Jitting of BPF_K is supported already, but not BPF_X. This patch complete
the support for the latter on both MIPS and microMIPS.
Cc: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Acked-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For micro-mips, srlv inside POOL32A encoding space should use 0x50
sub-opcode, NOT 0x90.
Some early version ISA doc describes the encoding as 0x90 for both srlv and
srav, this looks to me was a typo. I checked Binutils libopcode
implementation which is using 0x50 for srlv and 0x90 for srav.
v1->v2:
- Keep mm_srlv32_op sorted by value.
Fixes: f31318fdf3 ("MIPS: uasm: Add srlv uasm instruction")
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The Jazz iommu code already returns (~(dma_addr_t)0x0) on mapping
failures, so we can switch over to returning DMA_MAPPING_ERROR and
let the core dma-mapping code handle the rest.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
ASIDs have always been stored as unsigned longs, ie. 32 bits on MIPS32
kernels. This is problematic because it is feasible for the ASID version
to overflow & wrap around to zero.
We currently attempt to handle this overflow by simply setting the ASID
version to 1, using asid_first_version(), but we make no attempt to
account for the fact that there may be mm_structs with stale ASIDs that
have versions which we now reuse due to the overflow & wrap around.
Encountering this requires that:
1) A struct mm_struct X is active on CPU A using ASID (V,n).
2) That mm is not used on CPU A for the length of time that it takes
for CPU A's asid_cache to overflow & wrap around to the same
version V that the mm had in step 1. During this time tasks using
the mm could either be sleeping or only scheduled on other CPUs.
3) Some other mm Y becomes active on CPU A and is allocated the same
ASID (V,n).
4) mm X now becomes active on CPU A again, and now incorrectly has the
same ASID as mm Y.
Where struct mm_struct ASIDs are represented above in the format
(version, EntryHi.ASID), and on a typical MIPS32 system version will be
24 bits wide & EntryHi.ASID will be 8 bits wide.
The length of time required in step 2 is highly dependent upon the CPU &
workload, but for a hypothetical 2GHz CPU running a workload which
generates a new ASID every 10000 cycles this period is around 248 days.
Due to this long period of time & the fact that tasks need to be
scheduled in just the right (or wrong, depending upon your inclination)
way, this is obviously a difficult bug to encounter but it's entirely
possible as evidenced by reports.
In order to fix this, simply extend ASIDs to 64 bits even on MIPS32
builds. This will extend the period of time required for the
hypothetical system above to encounter the problem from 28 days to
around 3 trillion years, which feels safely outside of the realms of
possibility.
The cost of this is slightly more generated code in some commonly
executed paths, but this is pretty minimal:
| Code Size Gain | Percentage
-----------------------|----------------|-------------
decstation_defconfig | +270 | +0.00%
32r2el_defconfig | +652 | +0.01%
32r6el_defconfig | +1000 | +0.01%
I have been unable to measure any change in performance of the LMbench
lat_ctx or lat_proc tests resulting from the 64b ASIDs on either
32r2el_defconfig+interAptiv or 32r6el_defconfig+I6500 systems.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Suggested-by: James Hogan <jhogan@kernel.org>
References: https://lore.kernel.org/linux-mips/80B78A8B8FEE6145A87579E8435D78C30205D5F3@fzex.ruijie.com.cn/
References: https://lore.kernel.org/linux-mips/1488684260-18867-1-git-send-email-jiwei.sun@windriver.com/
Cc: Jiwei Sun <jiwei.sun@windriver.com>
Cc: Yu Huabing <yhb@ruijie.com.cn>
Cc: stable@vger.kernel.org # 2.6.12+
Cc: linux-mips@vger.kernel.org
Pass a GPIO descriptor for the device instead of a hardcoded
GPIO number from the global GPIO numberspace. Use gpio
descriptors throughout.
Cut the now completely unused platform data for the CF slot.
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Waldemar Brodkorb <wbx@openadk.org>
Cc: Matt Redfearn <matt.redfearn@mips.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For most OCTEON SoCs there is a repeated and redundant register definition
for almost every hardware register, although the register bit fields
would not differ from other SoCs. Since the driver code should use only
one definition for simplicity, these other fields are just redundant
and can be deleted.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Chips up to cn5xxx are compatible with cn38xx. All cn6xxx chips, and also
cnf71xx, are compatible with cn61xx.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
cn58xx is compatible with cn50xx, so use the latter.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
[paul.burton@mips.com: s/cn52xx/cn50xx/ in commit message.]
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
cvmx_gpio_bit_cfgx bitfields are indentical on cn70xx and cn73xx,
and also match the default definition. So use that instead.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Enable all OCTEON drivers in defconfig. Currently oct_ilm and octeon-rng
are still missing; enable those to get them included in kernel builds.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
There is a plan to build the kernel with -Wimplicit-fallthrough and
these places in the code produced warnings. Fix them up.
This patch produces no change in behaviour, but should be reviewed in
case these are actually bugs not intentional fallthoughs.
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Kees Cook <keescook@google.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
- Fix mips_get_syscall_arg() to operate on the task specified when
detecting o32 tasks running on MIPS64 kernels.
- Fix some incorrect GPIO pin muxing for the MT7620 SoC.
- Update the linux-mips mailing list address.
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQRgLjeFAZEXQzy86/s+p5+stXUA3QUCXAHFuBUccGF1bC5idXJ0
b25AbWlwcy5jb20ACgkQPqefrLV1AN0eOAEA9RshRqEGpFbTX8fm5N6/2SLlS/Rl
CZ/79El7LEfesMUA/2Kh9ApEx5cd5/1DhqNBCGUhnLvJt7BaHT49H/7KySAM
=tCjn
-----END PGP SIGNATURE-----
Merge tag 'mips_fixes_4.20_4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull few more MIPS fixes from Paul Burton:
- Fix mips_get_syscall_arg() to operate on the task specified when
detecting o32 tasks running on MIPS64 kernels.
- Fix some incorrect GPIO pin muxing for the MT7620 SoC.
- Update the linux-mips mailing list address.
* tag 'mips_fixes_4.20_4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MAINTAINERS: Update linux-mips mailing list address
MIPS: ralink: Fix mt7620 nd_sd pinmux
mips: fix mips_get_syscall_arg o32 check
was introduced by a patch that tried to fix one bug, but by doing so created
another bug. As both bugs corrupt the output (but they do not crash the
kernel), I decided to fix the design such that it could have both bugs
fixed. The original fix, fixed time reporting of the function graph tracer
when doing a max_depth of one. This was code that can test how much the
kernel interferes with userspace. But in doing so, it could corrupt the time
keeping of the function profiler.
The issue is that the curr_ret_stack variable was being used for two
different meanings. One was to keep track of the stack pointer on the
ret_stack (shadow stack used by the function graph tracer), and the other
use case was the graph call depth. Although, the two may be closely
related, where they got updated was the issue that lead to the two different
bugs that required the two use cases to be updated differently.
The big issue with this fix is that it requires changing each architecture.
The good news is, I was able to remove a lot of code that was duplicated
within the architectures and place it into a single location. Then I could
make the fix in one place.
I pushed this code into linux-next to let it settle over a week, and before
doing so, I cross compiled all the affected architectures to make sure that
they built fine.
In the mean time, I also pulled in a patch that fixes the sched_switch
previous tasks state output, that was not actually correct.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCW/4NPhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qnWAAQCyUIRLgYImr81eTl52lxNRsULk+aiI
U29kRFWWU0c40AEA1X9sDF0MgOItbRGfZtnHTZEousXRDaDf4Fge2kF7Egg=
=liQ0
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"While rewriting the function graph tracer, I discovered a design flaw
that was introduced by a patch that tried to fix one bug, but by doing
so created another bug.
As both bugs corrupt the output (but they do not crash the kernel), I
decided to fix the design such that it could have both bugs fixed. The
original fix, fixed time reporting of the function graph tracer when
doing a max_depth of one. This was code that can test how much the
kernel interferes with userspace. But in doing so, it could corrupt
the time keeping of the function profiler.
The issue is that the curr_ret_stack variable was being used for two
different meanings. One was to keep track of the stack pointer on the
ret_stack (shadow stack used by the function graph tracer), and the
other use case was the graph call depth. Although, the two may be
closely related, where they got updated was the issue that lead to the
two different bugs that required the two use cases to be updated
differently.
The big issue with this fix is that it requires changing each
architecture. The good news is, I was able to remove a lot of code
that was duplicated within the architectures and place it into a
single location. Then I could make the fix in one place.
I pushed this code into linux-next to let it settle over a week, and
before doing so, I cross compiled all the affected architectures to
make sure that they built fine.
In the mean time, I also pulled in a patch that fixes the sched_switch
previous tasks state output, that was not actually correct"
* tag 'trace-v4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
sched, trace: Fix prev_state output in sched_switch tracepoint
function_graph: Have profiler use curr_ret_stack and not depth
function_graph: Reverse the order of pushing the ret_stack and the callback
function_graph: Move return callback before update of curr_ret_stack
function_graph: Use new curr_ret_depth to manage depth instead of curr_ret_stack
function_graph: Make ftrace_push_return_trace() static
sparc/function_graph: Simplify with function_graph_enter()
sh/function_graph: Simplify with function_graph_enter()
s390/function_graph: Simplify with function_graph_enter()
riscv/function_graph: Simplify with function_graph_enter()
powerpc/function_graph: Simplify with function_graph_enter()
parisc: function_graph: Simplify with function_graph_enter()
nds32: function_graph: Simplify with function_graph_enter()
MIPS: function_graph: Simplify with function_graph_enter()
microblaze: function_graph: Simplify with function_graph_enter()
arm64: function_graph: Simplify with function_graph_enter()
ARM: function_graph: Simplify with function_graph_enter()
x86/function_graph: Simplify with function_graph_enter()
function_graph: Create function_graph_enter() to consolidate architecture code
The function_graph_enter() function does the work of calling the function
graph hook function and the management of the shadow stack, simplifying the
work done in the architecture dependent prepare_ftrace_return().
Have MIPS use the new code, and remove the shadow stack management as well as
having to set up the trace structure.
This is needed to prepare for a fix of a design bug on how the curr_ret_stack
is used.
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: stable@kernel.org
Fixes: 03274a3ffb ("tracing/fgraph: Adjust fgraph depth before calling trace return callback")
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
In the same vein as commit 93e01942a6 ("MIPS: Hardcode cpu_has_* where
known at compile time due to ISA"), we can use our knowledge of the ISA
being targeted by the kernel build to make cpu_has_mips* macros
compile-time constant in some cases. This allows the compiler greater
opportunity to optimize out code which will never execute.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21245/
Cc: linux-mips@linux-mips.org
The "norps" kernel command line parameter has apparently been deprecated
ever since it was added to the kernel back in 2006 - all it does is
print a message telling the user to use something else.
Remove the long dead "norps" parameter.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21244/
Cc: linux-mips@linux-mips.org
In case the nd_sd group is set to the sd-card function, Pins 45 + 46 are
configured as GPIOs. If they are blocked by the sd function, they can't
be used as GPIOs.
Reported-by: Kristian Evensen <kristian.evensen@gmail.com>
Signed-off-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: f576fb6a07 ("MIPS: ralink: cleanup the soc specific pinmux data")
Patchwork: https://patchwork.linux-mips.org/patch/21220/
Cc: John Crispin <john@phrozen.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # v3.18+
Let architectures opt into EISA support by selecting HAVE_EISA and
handle everything else in drivers/eisa.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
There is no good reason to duplicate the RAPIDIO menu in various
architectures. Instead provide a selectable HAVE_RAPIDIO symbol
that indicates native availability of RAPIDIO support and the handle
the rest in drivers/pci. This also means we now provide support
for PCI(e) to Rapidio bridges for every architecture instead of a
limited subset.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
There is nothing architecture specific in the PCMCIA core, so allow
building it everywhere. The actual host controllers will depend on ISA,
PCI or a specific SOC.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Move the definitions to drivers/pci and let the architectures select
them. Two small differences to before: PCI_DOMAINS_GENERIC now selects
PCI_DOMAINS, cutting down the churn for modern architectures. As the
only architectured arm did previously also offer PCI_DOMAINS as a user
visible choice in addition to selecting it from the relevant configs,
this is gone now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
There is no good reason to duplicate the PCI menu in every architecture.
Instead provide a selectable HAVE_PCI symbol that indicates availability
of PCI support, and a FORCE_PCI symbol to for PCI on and the handle the
rest in drivers/pci.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This option is always selected from LOONGSON_MACH3X. Switch to just
seleting PCI from that option and definining LOONGSON_PCIIO_BASE based
on CONFIG_LOONGSON_MACH3X. PCI already selects PCI_DOMAINS.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
MIPS' asm/mmzone.h includes the machine/platform mmzone.h
unconditionally, but since commit bb53fdf395 ("MIPS: c-r4k: Add
r4k_blast_scache_node for Loongson-3") is included by asm/rk4cache.h for
all r4k-style configs regardless of CONFIG_NEED_MULTIPLE_NODES.
This is problematic when CONFIG_NEED_MULTIPLE_NODES=n because both the
loongson3 & ip27 mmzone.h headers unconditionally define the NODE_DATA
preprocessor macro which is aready defined by linux/mmzone.h, resulting
in the following build error:
In file included from ./arch/mips/include/asm/mmzone.h:10,
from ./arch/mips/include/asm/r4kcache.h:23,
from arch/mips/mm/c-r4k.c:33:
./arch/mips/include/asm/mach-loongson64/mmzone.h:48: error: "NODE_DATA" redefined [-Werror]
#define NODE_DATA(n) (&__node_data[(n)]->pglist)
In file included from ./include/linux/topology.h:32,
from ./include/linux/irq.h:19,
from ./include/asm-generic/hardirq.h:13,
from ./arch/mips/include/asm/hardirq.h:16,
from ./include/linux/hardirq.h:9,
from arch/mips/mm/c-r4k.c:11:
./include/linux/mmzone.h:907: note: this is the location of the previous definition
#define NODE_DATA(nid) (&contig_page_data)
Resolve this by only including the machine mmzone.h when
CONFIG_NEED_MULTIPLE_NODES=y, which also removes the need for the empty
mach-generic version of the header which we delete.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: bb53fdf395 ("MIPS: c-r4k: Add r4k_blast_scache_node for Loongson-3")
Select CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION for MIPS, allowing the
user to enable dead code elimination. In order for this to work, ensure
that we keep the data bus exception table & the machine list by
annotating them with KEEP.
This shrinks both 32r2el_defconfig & 64r6el_defconfig builds by ~6%, as
shown by numbers from scripts/bloat-o-meter:
| 32r2el_defconfig | 64r6el_defconfig
--------|------------------|------------------
No DCE | 8919864 | 8286307
DCE | 8338988 (-6.51%) | 7741808 (-6.57%)
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21187/
Cc: linux-mips@linux-mips.org
If we are about to return the same register address that would
be the default anyway, fallback to default return instead of adding
a case label.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21200/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
When register definition is identical on all OCTEONs, we can trivially
delete the model specific union fields.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21203/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Delete cmvx override functions, they are not used.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21196/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Make cvmx_bootmem_alloc_range() static, it's not used outside the file.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21195/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Make cvmx_helper_setup_red_queue static, it's not used outside this file.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21194/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Include linux/sched/clock.h to get the declaration for sched_clock().
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21189/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Use correct type for fdt_property nameoff field.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21204/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Make __cvmx_helper_errata_fix_ipd_ptr_alignment static, it's not used
outside the file.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21210/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Include arm/prom.h to get the declaration of device_tree_init().
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21202/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Include asm/fw/fw.h to get the declaration of fw_init_cmdline().
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21206/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Make some internal data and functions static to avoid sparse warnings.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21211/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Make cvmx_l2c_spinlock static, it's not used outside the file.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21209/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
When checking for TIF_32BIT_REGS flag, mips_get_syscall_arg() should
use the task specified as its argument instead of the current task.
This potentially affects all syscall_get_arguments() users
who specify tasks different from the current.
Fixes: c0ff3c53d4 ("MIPS: Enable HAVE_ARCH_TRACEHOOK.")
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21185/
Cc: Elvira Khabirova <lineprinter@altlinux.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # v3.13+
Remove the Malta display platform code in favour of probing the
img-ascii-lcd driver via device tree. This reduces the amount of
platform code & the img-ascii-lcd driver offers us advantages in terms
of code sharing with other boards & functionality such as changing the
displayed message via sysfs. Defconfigs are untouched because the driver
already defaults y on when CONFIG_MIPS_MALTA=y.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21182/
Cc: linux-mips@linux-mips.org
The current methods for obtaining FP context via ptrace only provide
either 32 or 64 bits per data register. With MSA, where vector registers
are aliased with scalar FP data registers, those registers are 128 bits
wide. Thus a new mechanism is required for userland to access those
registers via ptrace. This patch introduces an NT_MIPS_MSA regset which
provides, in this order:
- The full 128 bits value of each vector register, in native
endianness saved as though elements are doubles. That is, the format
of each vector register is as would be obtained by saving it to
memory using an st.d instruction.
- The 32 bit scalar FP implementation register (FIR).
- The 32 bit scalar FP control & status register (FCSR).
- The 32 bit MSA implementation register (MSAIR).
- The 32 bit MSA control & status register (MSACSR).
The provision of the FIR & FCSR registers in addition to the MSA
equivalents allows scalar FP context to be retrieved as a subset of
the context available via this regset. Along with the MSA equivalents
they also nicely form the final 128 bit "register" of the regset.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21180/
Cc: linux-mips@linux-mips.org
KEXEC needs the new kernel's load address to be aligned on a page
boundary (see sanity_check_segment_list()), but on MIPS the default
vmlinuz load address is only explicitly aligned to 16 bytes.
Since the largest PAGE_SIZE supported by MIPS kernels is 64KB, increase
the alignment calculated by calc_vmlinuz_load_addr to 64KB.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21131/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <james.hogan@mips.com>
Cc: Steven J . Hill <Steven.Hill@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: <stable@vger.kernel.org> # 2.6.36+
This patch is borrowed from ARM64 to ensure pmd_present() returns false
after pmd_mknotpresent(). This is needed for THP.
References: 5bb1cc0ff9 ("arm64: Ensure pmd_present() returns false after pmd_mknotpresent()")
Reviewed-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21135/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <james.hogan@mips.com>
Cc: Steven J . Hill <Steven.Hill@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: <stable@vger.kernel.org> # 3.8+
For multi-node Loongson-3 (NUMA configuration), r4k_blast_scache() can
only flush Node-0's scache. So we add r4k_blast_scache_node() by using
(CAC_BASE | (node_id << NODE_ADDRSPACE_SHIFT)) instead of CKSEG0 as the
start address.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
[paul.burton@mips.com: Include asm/mmzone.h from asm/r4kcache.h for
nid_to_addrbase(). Add asm/mach-generic/mmzone.h
to allow inclusion for all platforms.]
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21129/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <james.hogan@mips.com>
Cc: Steven J . Hill <Steven.Hill@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: <stable@vger.kernel.org> # 3.15+
Select ARCH_HAS_UBSAN_SANITIZE_ALL in order to allow the user to
enable CONFIG_UBSAN_SANITIZE_ALL and instrument the entire kernel for
ubsan checks.
We exclude the VDSO from this because its build doesn't include the
__ubsan_handle_*() functions that the kernel proper defines in from
lib/ubsan.c, and the VDSO would have no sane way to report errors even
if it had definitions of these functions.
Signed-off-by: Hassan Naveed <hnaveed@wavecomp.com>
Reviewed-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21179/
Cc: <linux-mips@linux-mips.org>
Replace VLAN_TAG_PRESENT with single bit flag and free up
VLAN.CFI overload. Now VLAN.CFI is visible in networking stack
and can be passed around intact.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Both the Loongson3 & SGI-IP27 platforms set max_low_pfn to the last
available PFN describing memory. They both do it in paging_init() which
is later than ideal since max_low_pfn is used before that function is
called. Simplify both platforms to trivially initialize max_low_pfn
using the end address of DRAM, and do it earlier in prom_meminit().
Signed-off-by: Paul Burton <paul.burton@mips.com>
Suggested-by: Mike Rapoport <rppt@linux.ibm.com>
Tested-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Patchwork: https://patchwork.linux-mips.org/patch/21104/
References: https://patchwork.linux-mips.org/patch/21031/
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Cc: linux-mips@linux-mips.org
The Broadcom SiByte BCM1250, BCM1125, and BCM1125H SOCs have an onchip
DRAM controller that supports memory amounts of up to 16GiB, and due to
how the address decoder has been wired in the SOC any memory beyond 1GiB
is actually mapped starting from 4GiB physical up, that is beyond the
32-bit addressable limit[1]. Consequently if the maximum amount of
memory has been installed, then it will span up to 19GiB.
Many of the evaluation boards we support that are based on one of these
SOCs have their memory soldered and the amount present fits in the
32-bit address range. The BCM91250A SWARM board however has actual DIMM
slots and accepts, depending on the peripherals revision of the SOC, up
to 4GiB or 8GiB of memory in commercially available JEDEC modules[2].
I believe this is also the case with the BCM91250C2 LittleSur board.
This means that up to either 3GiB or 7GiB of memory requires 64-bit
addressing to access.
I believe the BCM91480B BigSur board, which has the BCM1480 SOC instead,
accepts at least as much memory, although I have no documentation or
actual hardware available to verify that.
Both systems have PCI slots installed for use by any PCI option boards,
including ones that only support 32-bit addressing (additionally the
32-bit PCI host bridge of the BCM1250, BCM1125, and BCM1125H SOCs limits
addressing to 32-bits), and there is no IOMMU available. Therefore for
PCI DMA to work in the presence of memory beyond enable swiotlb for the
affected systems.
All the other SOC onchip DMA devices use 40-bit addressing and therefore
can address the whole memory, so only enable swiotlb if PCI support and
support for DMA beyond 4GiB have been both enabled in the configuration
of the kernel.
This shows up as follows:
Broadcom SiByte BCM1250 B2 @ 800 MHz (SB1 rev 2)
Board type: SiByte BCM91250A (SWARM)
Determined physical RAM map:
memory: 000000000fe7fe00 @ 0000000000000000 (usable)
memory: 000000001ffffe00 @ 0000000080000000 (usable)
memory: 000000000ffffe00 @ 00000000c0000000 (usable)
memory: 0000000087fffe00 @ 0000000100000000 (usable)
software IO TLB: mapped [mem 0xcbffc000-0xcfffc000] (64MB)
in the bootstrap log and removes failures like these:
defxx 0000:02:00.0: dma_direct_map_page: overflow 0x0000000185bc6080+4608 of device mask ffffffff bus mask 0
fddi0: Receive buffer allocation failed
fddi0: Adapter open failed!
IP-Config: Failed to open fddi0
defxx 0000:09:08.0: dma_direct_map_page: overflow 0x0000000185bc6080+4608 of device mask ffffffff bus mask 0
fddi1: Receive buffer allocation failed
fddi1: Adapter open failed!
IP-Config: Failed to open fddi1
when memory beyond 4GiB is handed out to devices that can only do 32-bit
addressing.
This updates commit cce335ae47 ("[MIPS] 64-bit Sibyte kernels need
DMA32.").
References:
[1] "BCM1250/BCM1125/BCM1125H User Manual", Revision 1250_1125-UM100-R,
Broadcom Corporation, 21 Oct 2002, Section 3: "System Overview",
"Memory Map", pp. 34-38
[2] "BCM91250A User Manual", Revision 91250A-UM100-R, Broadcom
Corporation, 18 May 2004, Section 3: "Physical Description",
"Supported DRAM", p. 23
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
[paul.burton@mips.com: Remove GPL text from dma.c; SPDX tag covers it]
Signed-off-by: Paul Burton <paul.burton@mips.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Patchwork: https://patchwork.linux-mips.org/patch/21108/
References: cce335ae47 ("[MIPS] 64-bit Sibyte kernels need DMA32.")
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
The LittleSur board is marked for high memory support and therefore
clearly must provide a way to have enough memory installed for some to
be present outside the low 4GiB physical address range. With the memory
map of the BCM1250 SOC it has been built around it means over 1GiB of
actual DRAM, as only the first 1GiB is mapped in the low 4GiB physical
address range[1].
Complement commit cce335ae47 ("[MIPS] 64-bit Sibyte kernels need
DMA32.") then and also enable ZONE_DMA32 for LittleSur.
References:
[1] "BCM1250/BCM1125/BCM1125H User Manual", Revision 1250_1125-UM100-R,
Broadcom Corporation, 21 Oct 2002, Section 3: "System Overview",
"Memory Map", pp. 34-38
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Patchwork: https://patchwork.linux-mips.org/patch/21107/
Fixes: cce335ae47 ("[MIPS] 64-bit Sibyte kernels need DMA32.")
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
The Broadcom SiByte BCM1250, BCM1125H and BCM1125 SOCs have an onchip
32-bit PCI host bridge, and the two former SOCs also have an onchip HT
host bridge. The HT host bridge, where present, appears in the PCI
configuration space as if it was a device on the 32-bit PCI bus behind
the PCI host bridge, however at the hardware level its signals are
routed separately, so these two devices are actually peer host bridges.
As documented[1] and observed in reality the 32-bit PCI host bridge does
not support 64-bit addressing as it does not support the Dual Address
Cycle (DAC) PCI command, and naturally, being 32-bit only, it has no
means to carry the high 32 address bits otherwise. However the DRAM
controller also included in the SOC supports memory amounts of up to
16GiB, and due to how the address decoder has been wired in the SOC any
memory beyond 1GiB is actually mapped starting from 4GiB physical up,
that is beyond the 32-bit addressable limit. Consequently if the
maximum amount of memory has been installed, then it will span up to
19GiB.
Contrariwise, the HT host bridge does support full 40-bit addressing
defined by the HyperTransport (formerly LDT) specification the bridge
adheres to, depending on the peripherals revision of the SOC[2] either
revision 0.17[3] or revision 1.03[4]. This allows addressing any and
all memory installed, and well beyond.
Set the bus mask then to limit DMA addressing to 32 bits for all the
devices down the 32-bit PCI host bridge, excluding however any devices
that are down the HT host bridge.
References:
[1] "BCM1250/BCM1125/BCM1125H User Manual", Revision 1250_1125-UM100-R,
Broadcom Corporation, 21 Oct 2002, Section 8: "PCI Bus and
HyperTransport Fabric", "Introduction", p. 190
[2] same, Table 140: "HyperTransport Configuration Header (Type 1)", p.
245
[3] "Lightning Data Transport IO Specification", Revision 0.17, Advanced
Micro Devices, 21 Jan 2000, Section 3.2.1.2 "Command Packet", p. 8
[4] "HyperTransport I/O Link Specification", Revision 1.03,
HyperTransport Technology Consortium, 10 Oct 2001, Section 3.2.1.2
"Request Packet", pp. 27-28
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Patchwork: https://patchwork.linux-mips.org/patch/21106/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Select CONFIG_CPU_NO_EFFICIENT_FFS via Kconfig when the kernel is
configured for a pre-MIPS32r1 CPU, rather than defining its equivalent
in asm/cpu-features.h based upon overrides of cpu_has_mips* macros.
The latter only works if a platform has an cpu-feature-overrides.h
header which defines cpu_has_mips* macros, which are not generally
needed. There are many cases where we know that the target ISA for a
kernel build is MIPS32r1 or later & thus includes the CLZ instruction,
without requiring any overrides from the platform. Using Kconfig allows
us to take those into account, and more naturally make a decision about
instruction support using information about the target ISA.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21045/
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Zhaoxiu Zeng <zhaoxiu.zeng@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
After switched to NO_BOOTMEM, there are several boot failures. Some of
them have been fixed and some of them haven't. I find that many of them
are because of memory allocations are top-down, while the old behavior
is bottom-up. This patch let early memblock_alloc*() allocate memories
bottom-up to avoid some potential problems.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: bcec54bf31 ("mips: switch to NO_BOOTMEM")
Patchwork: https://patchwork.linux-mips.org/patch/21069/
References: https://patchwork.linux-mips.org/patch/21031/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <james.hogan@mips.com>
Cc: Steven J . Hill <Steven.Hill@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Re-enable OCTEON USB driver which is needed on older hardware
(e.g. EdgeRouter Lite) for mass storage etc. This got accidentally
deleted when config options were changed for OCTEON2/3 USB.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: f922bc0ad0 ("MIPS: Octeon: cavium_octeon_defconfig: Enable more drivers")
Patchwork: https://patchwork.linux-mips.org/patch/21077/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # 4.14+
The Intel EG20T Platform Controller Hub used on the MIPS Boston
development board supports prefetching memory to optimize DMA transfers.
Unfortunately for unknown reasons this doesn't work well with some MIPS
CPUs such as the P6600, particularly when using an I/O Coherence Unit
(IOCU) to provide cache-coherent DMA. In these systems it is common for
DMA data to be lost, resulting in broken access to EG20T devices such as
the MMC or SATA controllers.
Support for a DT property to configure the prefetching was added a while
back by commit 549ce8f134 ("misc: pch_phub: Read prefetch value from
device tree if passed") but we never added the DT snippet to make use of
it. Add that now in order to disable the prefetching & fix DMA on the
affected systems.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21068/
Cc: linux-mips@linux-mips.org
We currently have 2 commonly used methods for switching ISA within
assembly code, then restoring the original ISA.
1) Using a pair of .set push & .set pop directives. For example:
.set push
.set mips32r2
<some_insn>
.set pop
2) Using .set mips0 to restore the ISA originally specified on the
command line. For example:
.set mips32r2
<some_insn>
.set mips0
Unfortunately method 2 does not work with nanoMIPS toolchains, where the
assembler rejects the .set mips0 directive like so:
Error: cannot change ISA from nanoMIPS to mips0
In preparation for supporting nanoMIPS builds, switch all instances of
method 2 in generic non-platform-specific code to use push & pop as in
method 1 instead. The .set push & .set pop is arguably cleaner anyway,
and if nothing else it's good to consistently use one method.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21037/
Cc: linux-mips@linux-mips.org
Allow the user to configure the kernel to omit support for floating
point, by setting CONFIG_MIPS_FP_SUPPORT=n. In an attempt to avoid
problems for users who don't understand the impact of this, only expose
the option when CONFIG_EXPERT=y.
When CONFIG_MIPS_FP_SUPPORT=n all support for FPU hardware, FPU
emulation & FP context will be removed from the kernel. If a userland
program attempts to execute a floating point instruction it will receive
a SIGILL.
Setting CONFIG_MIPS_FP_SUPPORT=n shaves around 112KB from a
64r6el_defconfig build using GCC 8.1.0.
This also helps prepare us for supporting the nanoMIPS ISA, for which
floating point support has not been finalized.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21014/
Cc: linux-mips@linux-mips.org
When CONFIG_MIPS_FP_SUPPORT=n we don't support floating point & so don't
need to preserve floating point context for tasks. Remove that context
from struct task_struct.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21013/
Cc: linux-mips@linux-mips.org
When CONFIG_MIPS_FP_SUPPORT=n we don't support floating point, so
there's no point compiling in our FPU emulator. Avoid doing so,
providing stub versions of dsemul cleanup functions that are called from
signal & task handling code.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21012/
Cc: linux-mips@linux-mips.org
When CONFIG_MIPS_FP_SUPPORT=n we don't support floating point, so we
don't need to worry about floating point exceptions pending in the
Floating point Control & Status Register (FCSR) during switch_to(). Stub
out the __sanitize_fcr31() macro in this case.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21010/
Cc: linux-mips@linux-mips.org
When CONFIG_MIPS_FP_SUPPORT=n we don't support floating point, so we can
avoid needless checks of ELF headers specifying the FP ABI or NaN
encoding to use. Deselect CONFIG_ARCH_BINFMT_ELF_STATE in this case to
avoid the need for our arch_elf_pt_proc() & arch_check_elf() functions,
and stub out the mips_set_personality_nan() & mips_set_personality_fp()
functions such that SET_PERSONALITY() doesn't need to worry about any of
this.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21011/
Cc: linux-mips@linux-mips.org
When CONFIG_MIPS_FP_SUPPORT=n we don't support floating point, so
there's no need to save & restore floating point context around signals.
This prepares us for the removal of FP context from struct task_struct
later.
Since MSA context is a superset of FP context support for it similarly
needs to be removed when MSA/FP support is disabled.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21009/
Cc: linux-mips@linux-mips.org
When CONFIG_MIPS_FP_SUPPORT=n we don't support floating point, so remove
the related ptrace support. Besides removing code which should not be
needed, this prepares us for the removal of FPU state in struct
task_struct which this code requires.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21008/
Cc: linux-mips@linux-mips.org
When CONFIG_MIPS_FP_SUPPORT=n we don't support floating point, so remove
support for floating point instructions from emulate_load_store_insn() &
emulate_load_store_microMIPS(). This code should not be needed & relies
upon access to FPU state in struct task_struct which will later be
removed.
Similarly & for the same reasons, when CONFIG_CPU_HAS_MSA=n remove
support for MSA instructions. Since MSA support depends upon FP support
this is implied when CONFIG_MIPS_FP_SUPPORT=n.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21020/
Cc: linux-mips@linux-mips.org
When CONFIG_MIPS_FP_SUPPORT=n we don't support floating point, so remove
the floating point branch support from __compute_return_epc_for_insn() &
__mm_isBranchInstr(). This code should never be needed & more
importantly relies upon FPU state in struct task_struct which will later
be removed.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21017/
Cc: linux-mips@linux-mips.org
When CONFIG_MIPS_FP_SUPPORT=n we don't support floating point, so we'll
never need to enable the FPU. Avoid doing so on a Co-Processor Unusable
exception (do_cpu), and remove the Floating Point Exception handler
(do_fpe) which should never be executed when the FPU is disabled.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21007/
Cc: linux-mips@linux-mips.org
Provide stub versions of functions in asm/fpu.h when
CONFIG_MIPS_FP_SUPPORT=n. Two approaches are taken to the functions
provided:
- Functions which can safely be called when FP is not enabled provide
stubs which return an error where appropriate or are simple no-ops.
- Functions which should only ever be called in cases where
cpu_has_fpu is true or the FPU was successfully enabled are declared
extern & annotated with __compiletime_error() to detect cases in
which they are called incorrectly.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21006/
Cc: linux-mips@linux-mips.org
When CONFIG_MIPS_FP_SUPPORT=n we don't support floating point, so
there's no point in detecting presence of an FPU. Hardcode
cpu_has_fpu=0 such that we optimize out code that makes use of the FPU.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21005/
Cc: linux-mips@linux-mips.org
Introduce a Kconfig variable that will indicate whether to include
support for floating point in the kernel. For now this is always
enabled, and will be made configurable in a later patch.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21016/
Cc: linux-mips@linux-mips.org
Introduce a CONFIG_CPU_R2300_FPU Kconfig symbol mirroring the existing
CONFIG_CPU_R4K_FPU, and use it to determine whether to build r4k_fpu.S.
This removes the duplicate R3000 & TX39XX cases in
arch/mips/kernel/Makefile and prepares us for the possibility of
disabling FP support later.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21004/
Cc: linux-mips@linux-mips.org
asm/fpu.h contains forward declarations of struct sigcontext & struct
sigcontext32 which appear to have been unused since commit 137f6f3e28
("MIPS: Cleanup signal code initialization"). Remove the dead code.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21015/
Cc: linux-mips@linux-mips.org
Emulated floating point instructions don't ensure that the PF_USED_MATH
flag is set for the task. This results in a couple of inconsistencies:
- ptrace will return the default initial state of FP registers rather
than the values actually stored in struct thread_struct, hiding
state that has been updated by emulated floating point instructions.
- If a task migrates to a CPU with an FPU after having emulated
floating point instructions then its floating point register state
will be reset to the default ~0 bit pattern, losing state from the
emulated instructions.
Fix this by calling init_fp_ctx() from fpu_emulator_cop1Handler() to
consistently initialize FP state if it was previously uninitialized,
setting the PF_USED_MATH flag in the process.
All callers of fpu_emulator_cop1Handler() either call lose_fpu(1) before
it in order to save any live FPU registers to struct thread_struct, or
in the case of do_cpu() already know that the task does not own an FPU
so lose_fpu(1) would be a no-op. Since we know that saving FP context
will be unnecessary in the case where FP context was just initialized we
move this call into fpu_emulator_cop1Handler() too, providing
consistency & avoiding needless duplication.
Calls to own_fpu(1) are common after return from
fpu_emulator_cop1Handler() too, but this would not be a no-op in the
do_cpu() case so these are left as-is. A potential future improvement
could be to have fpu_emulator_cop1Handler() restore FPU state
automatically only if it saved it, though this may not be optimal if
some callers are better off without their current calls to own_fpu(1).
One potential example of this could be mipsr2_decoder() which as-is
could end up saving & restoring FP context repeatedly & unnecessarily if
emulating multiple FP instructions.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21003/
Cc: linux-mips@linux-mips.org
MIPS has up until now had 3 different ways for a task's floating point
context to be initialized:
- If the task's first use of FP involves it gaining ownership of an
FPU then _init_fpu() is used to initialize the FPU's registers such
that they all contain ~0, and the FPU registers will be stored to
struct thread_info later (eg. when context switching).
- If the task first uses FP on a CPU without an associated FPU then
fpu_emulator_init_fpu() initializes the task's floating point
register state in struct thread_info such that all floating point
register contain the bit pattern 0x7ff800007ff80000, different to
the _init_fpu() behaviour.
- If a task's floating point context is first accessed via ptrace then
init_fp_ctx() initializes the floating point register state in
struct thread_info to ~0, giving equivalent state to _init_fpu().
The _init_fpu() path has 2 separate implementations - one for r2k/r3k
style systems & one for r4k style systems. The _init_fpu() path also
requires that we be careful to clear & restore the value of the
Config5.FRE bit on modern systems in order to avoid inadvertently
triggering floating point exceptions.
None of this code is in a performance critical hot path - it runs only
the first time a task uses floating point. As such it doesn't seem to
warrant the complications of maintaining the _init_fpu() path.
Remove _init_fpu() & fpu_emulator_init_fpu(), instead using
init_fp_ctx() consistently to initialize floating point register state
in struct thread_info. Upon a task's first use of floating point this
will typically mean that we initialize state in memory & then load it
into FPU registers using _restore_fp() just as we would on a context
switch. For other paths such as __compute_return_epc_for_insn() or
mipsr2_decoder() this results in a significant simplification of the
work to be done.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21002/
Cc: linux-mips@linux-mips.org
The BMIPS5xxx core_init function contains a call to an init_fpu function
inside an #ifdef whose condition never evaluates true. Remove the dead
code. FPU initialization happens later, primarily when a userland
program attempts to use it.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21018/
Cc: linux-mips@linux-mips.org
From MIPSr6 onwards FP64 support is mandatory, and so
CONFIG_MIPS_O32_FP64_SUPPORT is always selected for configurations which
support O32 binaries. Hide the useless unchangeable prompt in these
cases.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21019/
Cc: linux-mips@linux-mips.org
If we built the kernel targeting the microMIPS ISA then the very fact
that the kernel is running implies that the CPU supports microMIPS. Thus
we can hardcode cpu_has_mmips to 1 allowing the compiler greater scope
for optimisation due to the compile-time constant.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21022/
Cc: linux-mips@linux-mips.org
The GCC_OFF_SMALL_ASM macro defines the constraint to use for
instructions needing "small offsets", typically the LL or SC
instructions. Historically these had 16 bit offsets, but microMIPS &
MIPS32/MIPS64r6 onwards reduced the width of the offset field.
GCC 4.9 & higher supports a ZC constraint which matches the offset
requirements of the LL & SC instructions. Where supported we can use
the ZC constraint regardless of ISA, and it will handle the requirements
of the ISA correctly. As such we require 3 cases:
- GCC 4.9 & higher can use ZC.
- GCC older than 4.9 must use the older R constraint, which does not
take into account microMIPS or MIPSr6.
- microMIPS builds therefore require GCC 4.9 or higher. MIPSr6 support
was only introduced in newer compilers anyway so it can be ignored
here.
The current code complicates this a little by specifically having MIPSr6
bypass the GCC version check, and using the R constraint for pre-MIPSr6
builds even if the compiler supports ZC which would be equivalent.
Simplify this such that the code straightforwardly implements the 3
cases outlined above.
For non-GCC compilers we presume that ZC is safe to use. In practice the
only non-GCC compiler of interest is clang and it has supported the ZC
constraint since version 3.7.0. It seems safe enough to presume that
nobody will expect to built a working kernel using a clang version older
than that, and if they do then they'll have bigger problems. As such we
don't check the clang version number & just presume ZC is usable when
the compiler is not GCC.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20999/
Cc: linux-mips@linux-mips.org
asm/compiler.h defined GCC_IMM_ASM & GCC_REG_ACCUM macros, both of which
are defined differently for GCC pre-3.4 or GCC 3.4 & higher. We only
support building with GCC 4.6 & higher since commit cafa0010cd ("Raise
the minimum required gcc version to 4.6"), which makes the pre-3.4
definition dead code.
Rather than leave the macro definitions around, inline the GCC 3.4 &
higher definitions into the single file that uses them & remove the
macros entirely.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21000/
Cc: linux-mips@linux-mips.org
This supports computers based on the R4000SC processor:
* DECstation 5000/150 and DECsystem 5000/150,
* Personal DECstation 5000/50, Personal DECsystem 5000/50,
and computers based on the R4400SC processor:
* DECstation 5000/260 and DECsystem 5000/260,
* DECsystem 5900/260,
in the 64-bit mode.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20986/
Cc: Ralf Baechle <ralf@linux-mips.org>
This supports computers based on the R4000SC processor:
* DECstation 5000/150 and DECsystem 5000/150,
* Personal DECstation 5000/50, Personal DECsystem 5000/50,
and computers based on the R4400SC processor:
* DECstation 5000/260 and DECsystem 5000/260,
* DECsystem 5900/260,
in the 32-bit mode.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20985/
Cc: Ralf Baechle <ralf@linux-mips.org>
Regenerate the R3k DECstation defconfig, in particular including more
relevant drivers.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20984/
Cc: Ralf Baechle <ralf@linux-mips.org>
Allows the users of ptrace to access memory mapped by the ptraced process
using the same cache coherency attributes as the original process.
For example while using gdb with ioremap_prot() incorporated, both gdb and
the process being traced will have same cache coherency attributes.
Signed-off-by: Hassan Naveed <hnaveed@wavecomp.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20955/
Cc: <linux-mips@linux-mips.org>
Fix a MIPS `dma_alloc_coherent' regression from commit bc3ec75de5
("dma-mapping: merge direct and noncoherent ops") that causes a cached
allocation to be returned on noncoherent cache systems.
This is due to an inverted check now used in the MIPS implementation of
`arch_dma_alloc' on the result from `dma_direct_alloc_pages' before
doing the cached-to-uncached mapping of the allocation address obtained.
The mapping has to be done for a non-NULL rather than NULL result,
because a NULL result means the allocation has failed.
Invert the check for correct operation then.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Fixes: bc3ec75de5 ("dma-mapping: merge direct and noncoherent ops")
Patchwork: https://patchwork.linux-mips.org/patch/20965/
The maximum number of interfaces is returned by
cvmx_helper_get_number_of_interfaces(), and the value is used to access
interface_port_count[]. When CN68XX support was added, we forgot
to increase the array size. Fix that.
Fixes: 2c8c3f0201 ("MIPS: Octeon: Support additional interfaces on CN68XX")
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20949/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # v4.3+
Evaluating cc-name invokes the compiler every time even when you are
not compiling anything, like 'make help'. This is not efficient.
The compiler type has been already detected in the Kconfig stage.
Use CONFIG_CC_IS_CLANG, instead.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Paul Burton <paul.burton@mips.com> (MIPS)
Acked-by: Joel Stanley <joel@jms.id.au>
When a memblock allocation APIs are called with align = 0, the alignment
is implicitly set to SMP_CACHE_BYTES.
Implicit alignment is done deep in the memblock allocator and it can
come as a surprise. Not that such an alignment would be wrong even
when used incorrectly but it is better to be explicit for the sake of
clarity and the prinicple of the least surprise.
Replace all such uses of memblock APIs with the 'align' parameter
explicitly set to SMP_CACHE_BYTES and stop implicit alignment assignment
in the memblock internal allocation functions.
For the case when memblock APIs are used via helper functions, e.g. like
iommu_arena_new_node() in Alpha, the helper functions were detected with
Coccinelle's help and then manually examined and updated where
appropriate.
The direct memblock APIs users were updated using the semantic patch below:
@@
expression size, min_addr, max_addr, nid;
@@
(
|
- memblock_alloc_try_nid_raw(size, 0, min_addr, max_addr, nid)
+ memblock_alloc_try_nid_raw(size, SMP_CACHE_BYTES, min_addr, max_addr,
nid)
|
- memblock_alloc_try_nid_nopanic(size, 0, min_addr, max_addr, nid)
+ memblock_alloc_try_nid_nopanic(size, SMP_CACHE_BYTES, min_addr, max_addr,
nid)
|
- memblock_alloc_try_nid(size, 0, min_addr, max_addr, nid)
+ memblock_alloc_try_nid(size, SMP_CACHE_BYTES, min_addr, max_addr, nid)
|
- memblock_alloc(size, 0)
+ memblock_alloc(size, SMP_CACHE_BYTES)
|
- memblock_alloc_raw(size, 0)
+ memblock_alloc_raw(size, SMP_CACHE_BYTES)
|
- memblock_alloc_from(size, 0, min_addr)
+ memblock_alloc_from(size, SMP_CACHE_BYTES, min_addr)
|
- memblock_alloc_nopanic(size, 0)
+ memblock_alloc_nopanic(size, SMP_CACHE_BYTES)
|
- memblock_alloc_low(size, 0)
+ memblock_alloc_low(size, SMP_CACHE_BYTES)
|
- memblock_alloc_low_nopanic(size, 0)
+ memblock_alloc_low_nopanic(size, SMP_CACHE_BYTES)
|
- memblock_alloc_from_nopanic(size, 0, min_addr)
+ memblock_alloc_from_nopanic(size, SMP_CACHE_BYTES, min_addr)
|
- memblock_alloc_node(size, 0, nid)
+ memblock_alloc_node(size, SMP_CACHE_BYTES, nid)
)
[mhocko@suse.com: changelog update]
[akpm@linux-foundation.org: coding-style fixes]
[rppt@linux.ibm.com: fix missed uses of implicit alignment]
Link: http://lkml.kernel.org/r/20181016133656.GA10925@rapoport-lnx
Link: http://lkml.kernel.org/r/1538687224-17535-1-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Acked-by: Paul Burton <paul.burton@mips.com> [MIPS]
Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Move remaining definitions and declarations from include/linux/bootmem.h
into include/linux/memblock.h and remove the redundant header.
The includes were replaced with the semantic patch below and then
semi-automated removal of duplicated '#include <linux/memblock.h>
@@
@@
- #include <linux/bootmem.h>
+ #include <linux/memblock.h>
[sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h]
Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au
[sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h]
Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au
[sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal]
Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au
Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The alloc_bootmem(size) is a shortcut for allocation of SMP_CACHE_BYTES
aligned memory. When the align parameter of memblock_alloc() is 0, the
alignment is implicitly set to SMP_CACHE_BYTES and thus alloc_bootmem(size)
and memblock_alloc(size, 0) are equivalent.
The conversion is done using the following semantic patch:
@@
expression size;
@@
- alloc_bootmem(size)
+ memblock_alloc(size, 0)
Link: http://lkml.kernel.org/r/1536927045-23536-22-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The functions are equivalent, just the later does not require nobootmem
translation layer.
The conversion is done using the following semantic patch:
@@
expression size, align, goal;
@@
- __alloc_bootmem(size, align, goal)
+ memblock_alloc_from(size, align, goal)
Link: http://lkml.kernel.org/r/1536927045-23536-21-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The alloc_bootmem_low_pages() function allocates PAGE_SIZE aligned regions
from low memory. memblock_alloc_low() with alignment set to PAGE_SIZE does
exactly the same thing.
The conversion is done using the following semantic patch:
@@
expression e;
@@
- alloc_bootmem_low_pages(e)
+ memblock_alloc_low(e, PAGE_SIZE)
Link: http://lkml.kernel.org/r/1536927045-23536-19-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All architecures use memblock for early memory management. There is no need
for the CONFIG_HAVE_MEMBLOCK configuration option.
[rppt@linux.vnet.ibm.com: of/fdt: fixup #ifdefs]
Link: http://lkml.kernel.org/r/20180919103457.GA20545@rapoport-lnx
[rppt@linux.vnet.ibm.com: csky: fixups after bootmem removal]
Link: http://lkml.kernel.org/r/20180926112744.GC4628@rapoport-lnx
[rppt@linux.vnet.ibm.com: remove stale #else and the code it protects]
Link: http://lkml.kernel.org/r/1538067825-24835-1-git-send-email-rppt@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/1536927045-23536-4-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Tested-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All achitectures select NO_BOOTMEM which essentially becomes 'Y' for any
kernel configuration and therefore it can be removed.
[alexander.h.duyck@linux.intel.com: remove now defunct NO_BOOTMEM from depends list for deferred init]
Link: http://lkml.kernel.org/r/20180925201814.3576.15105.stgit@localhost.localdomain
Link: http://lkml.kernel.org/r/1536927045-23536-3-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Prefer _THIS_IP_ defined in linux/kernel.h.
Most definitions of current_text_addr were the same as _THIS_IP_, but
a few archs had inline assembly instead.
This patch removes the final call site of current_text_addr, making all
of the definitions dead code.
[akpm@linux-foundation.org: fix arch/csky/include/asm/processor.h]
Link: http://lkml.kernel.org/r/20180911182413.180715-1-ndesaulniers@google.com
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here is the big tty and serial pull request for 4.20-rc1
Lots of little things here, including a merge from the SPI tree in order
to keep things simpler for everyone to sync around for one platform.
Major stuff is:
- tty buffer clearing after use
- atmel_serial fixes and additions
- xilinx uart driver updates
and of course, lots of tiny fixes and additions to individual serial
drivers.
All of these have been in linux-next with no reported issues for a
while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW9bW0w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymYhgCfbxr0T+4lF/rpGxNXNnV4u5boRJUAn2L8R+1y
URbAWHvKfaby2AVfQ1z0
=qTHH
-----END PGP SIGNATURE-----
Merge tag 'tty-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH:
"Here is the big tty and serial pull request for 4.20-rc1
Lots of little things here, including a merge from the SPI tree in
order to keep things simpler for everyone to sync around for one
platform.
Major stuff is:
- tty buffer clearing after use
- atmel_serial fixes and additions
- xilinx uart driver updates
and of course, lots of tiny fixes and additions to individual serial
drivers.
All of these have been in linux-next with no reported issues for a
while"
* tag 'tty-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (66 commits)
of: base: Change logic in of_alias_get_alias_list()
of: base: Fix english spelling in of_alias_get_alias_list()
serial: sh-sci: do not warn if DMA transfers are not supported
serial: uartps: Do not allow use aliases >= MAX_UART_INSTANCES
tty: check name length in tty_find_polling_driver()
serial: sh-sci: Add r8a77990 support
tty: wipe buffer if not echoing data
tty: wipe buffer.
serial: fsl_lpuart: Remove the alias node dependence
TTY: sn_console: Replace spin_is_locked() with spin_trylock()
Revert "serial:serial_core: Allow use of CTS for PPS line discipline"
serial: 8250_uniphier: add auto-flow-control support
serial: 8250_uniphier: flatten probe function
serial: 8250_uniphier: remove unused "fifo-size" property
dt-bindings: serial: sh-sci: Document r8a7744 bindings
serial: uartps: Fix missing unlock on error in cdns_get_id()
tty/serial: atmel: add ISO7816 support
tty/serial_core: add ISO7816 infrastructure
serial:serial_core: Allow use of CTS for PPS line discipline
serial: docs: Fix filename for serial reference implementation
...
Subsystem:
- non devm managed registration is now removed from the driver API.
- all the unnecessary rtc_valid_tm() calls have been removed
Drivers:
- abx80X: watchdog support
- cmos: fix non ACPI support
- sc27xx: fix alarm support
- Remove a possible sysfs race condition for ab8500, ds1307, ds1685, isl1208
- Fix a possible race condition where an irq handler may be called before the
rtc_device struct is allocated for mt6397, pl030, menelaus, armada38x
-----BEGIN PGP SIGNATURE-----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=5JM5
-----END PGP SIGNATURE-----
Merge tag 'rtc-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"This cycle, there were mostly non urgent fixes in drivers. I also
finally unexported the non managed registration.
Subsystem:
- non devm managed registration is now removed from the driver API
- all the unnecessary rtc_valid_tm() calls have been removed
Drivers:
- abx80X: watchdog support
- cmos: fix non ACPI support
- sc27xx: fix alarm support
- Remove a possible sysfs race condition for ab8500, ds1307, ds1685,
isl1208
- Fix a possible race condition where an irq handler may be called
before the rtc_device struct is allocated for mt6397, pl030,
menelaus, armada38x"
* tag 'rtc-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (54 commits)
rtc: sc27xx: Always read normal alarm when registering RTC device
rtc: sc27xx: Add check to see if need to enable the alarm interrupt
rtc: sc27xx: Remove interrupts disable and clear in probe()
rtc: sc27xx: Clear SPG value update interrupt status
rtc: sc27xx: Set wakeup capability before registering rtc device
rtc: s35390a: Change buf's type to u8 in s35390a_init
rtc: ds1307: fix ds1339 wakealarm support
rtc: ds1685: simplify getting .driver_data
rtc: m41t80: mark expected switch fall-through
rtc: tegra: Propagate errors from platform_get_irq()
rtc: cmos: Remove the `use_acpi_alarm' module parameter for !ACPI
rtc: cmos: Fix non-ACPI undefined reference to `hpet_rtc_interrupt'
rtc: mv: let the core handle invalid alarms
rtc: vr41xx: switch to rtc_time64_to_tm/rtc_tm_to_time64
rtc: ab8500: remove useless check
rtc: ab8500: let the core handle range
rtc: ab8500: use rtc_add_group
rtc: rs5c348: report error when time is invalid
rtc: rs5c348: remove forward declaration
rtc: rs5c348: remove useless label
...
Merge updates from Andrew Morton:
- a few misc things
- ocfs2 updates
- most of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (132 commits)
hugetlbfs: dirty pages as they are added to pagecache
mm: export add_swap_extent()
mm: split SWP_FILE into SWP_ACTIVATED and SWP_FS
tools/testing/selftests/vm/map_fixed_noreplace.c: add test for MAP_FIXED_NOREPLACE
mm: thp: relocate flush_cache_range() in migrate_misplaced_transhuge_page()
mm: thp: fix mmu_notifier in migrate_misplaced_transhuge_page()
mm: thp: fix MADV_DONTNEED vs migrate_misplaced_transhuge_page race condition
mm/kasan/quarantine.c: make quarantine_lock a raw_spinlock_t
mm/gup: cache dev_pagemap while pinning pages
Revert "x86/e820: put !E820_TYPE_RAM regions into memblock.reserved"
mm: return zero_resv_unavail optimization
mm: zero remaining unavailable struct pages
tools/testing/selftests/vm/gup_benchmark.c: add MAP_HUGETLB option
tools/testing/selftests/vm/gup_benchmark.c: add MAP_SHARED option
tools/testing/selftests/vm/gup_benchmark.c: allow user specified file
tools/testing/selftests/vm/gup_benchmark.c: fix 'write' flag usage
mm/gup_benchmark.c: add additional pinning methods
mm/gup_benchmark.c: time put_page()
mm: don't raise MEMCG_OOM event due to failed high-order allocation
mm/page-writeback.c: fix range_cyclic writeback vs writepages deadlock
...
ia64, mips, parisc, powerpc, sh, sparc, x86 architectures use the same
version of huge_ptep_get, so move this generic implementation into
asm-generic/hugetlb.h.
[arnd@arndb.de: fix ARM 3level page tables]
Link: http://lkml.kernel.org/r/20181005161722.904274-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/20180920060358.16606-12-alex@ghiti.fr
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Tested-by: Helge Deller <deller@gmx.de> [parisc]
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Acked-by: Paul Burton <paul.burton@mips.com> [MIPS]
Acked-by: Ingo Molnar <mingo@kernel.org> [x86]
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
arm, ia64, sh, x86 architectures use the same version
of huge_ptep_set_access_flags, so move this generic implementation
into asm-generic/hugetlb.h.
Link: http://lkml.kernel.org/r/20180920060358.16606-11-alex@ghiti.fr
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Tested-by: Helge Deller <deller@gmx.de> [parisc]
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Acked-by: Paul Burton <paul.burton@mips.com> [MIPS]
Acked-by: Ingo Molnar <mingo@kernel.org> [x86]
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
arm, ia64, mips, powerpc, sh, x86 architectures use the same version of
huge_ptep_set_wrprotect, so move this generic implementation into
asm-generic/hugetlb.h.
Link: http://lkml.kernel.org/r/20180920060358.16606-10-alex@ghiti.fr
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Tested-by: Helge Deller <deller@gmx.de> [parisc]
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Acked-by: Paul Burton <paul.burton@mips.com> [MIPS]
Acked-by: Ingo Molnar <mingo@kernel.org> [x86]
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
arm, arm64, powerpc, sparc, x86 architectures use the same version of
prepare_hugepage_range, so move this generic implementation into
asm-generic/hugetlb.h.
Link: http://lkml.kernel.org/r/20180920060358.16606-9-alex@ghiti.fr
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Tested-by: Helge Deller <deller@gmx.de> [parisc]
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Acked-by: Paul Burton <paul.burton@mips.com> [MIPS]
Acked-by: Ingo Molnar <mingo@kernel.org> [x86]
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
arm, arm64, ia64, mips, parisc, powerpc, sh, sparc, x86 architectures use
the same version of huge_pte_wrprotect, so move this generic
implementation into asm-generic/hugetlb.h.
Link: http://lkml.kernel.org/r/20180920060358.16606-8-alex@ghiti.fr
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Tested-by: Helge Deller <deller@gmx.de> [parisc]
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Acked-by: Paul Burton <paul.burton@mips.com> [MIPS]
Acked-by: Ingo Molnar <mingo@kernel.org> [x86]
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
arm, arm64, ia64, mips, parisc, powerpc, sh, sparc, x86 architectures use
the same version of huge_pte_none, so move this generic implementation
into asm-generic/hugetlb.h.
Link: http://lkml.kernel.org/r/20180920060358.16606-7-alex@ghiti.fr
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Tested-by: Helge Deller <deller@gmx.de> [parisc]
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Acked-by: Paul Burton <paul.burton@mips.com> [MIPS]
Acked-by: Ingo Molnar <mingo@kernel.org> [x86]
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
arm, x86 architectures use the same version of huge_ptep_clear_flush, so
move this generic implementation into asm-generic/hugetlb.h.
Link: http://lkml.kernel.org/r/20180920060358.16606-6-alex@ghiti.fr
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Tested-by: Helge Deller <deller@gmx.de> [parisc]
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Acked-by: Paul Burton <paul.burton@mips.com> [MIPS]
Acked-by: Ingo Molnar <mingo@kernel.org> [x86]
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
arm, ia64, sh, x86 architectures use the same version of
huge_ptep_get_and_clear, so move this generic implementation into
asm-generic/hugetlb.h.
Link: http://lkml.kernel.org/r/20180920060358.16606-5-alex@ghiti.fr
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Tested-by: Helge Deller <deller@gmx.de> [parisc]
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Acked-by: Paul Burton <paul.burton@mips.com> [MIPS]
Acked-by: Ingo Molnar <mingo@kernel.org> [x86]
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
arm, ia64, mips, powerpc, sh, x86 architectures use the same version of
set_huge_pte_at, so move this generic implementation into
asm-generic/hugetlb.h.
Link: http://lkml.kernel.org/r/20180920060358.16606-4-alex@ghiti.fr
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Tested-by: Helge Deller <deller@gmx.de> [parisc]
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Acked-by: Paul Burton <paul.burton@mips.com> [MIPS]
Acked-by: Ingo Molnar <mingo@kernel.org> [x86]
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
arm, arm64, mips, parisc, sh, x86 architectures use the same version of
hugetlb_free_pgd_range, so move this generic implementation into
asm-generic/hugetlb.h.
Link: http://lkml.kernel.org/r/20180920060358.16606-3-alex@ghiti.fr
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Tested-by: Helge Deller <deller@gmx.de> [parisc]
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Acked-by: Paul Burton <paul.burton@mips.com> [MIPS]
Acked-by: Ingo Molnar <mingo@kernel.org> [x86]
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- kexec support for the generic MIPS platform when running on a CPU
including the MIPS Coherence Manager & related hardware.
- Improvements to the definition of memory barriers used around MMIO
accesses, and fixes in their use.
- Switch to CONFIG_NO_BOOTMEM from Mike Rapoport, finally dropping
reliance on the old bootmem code.
- A number of fixes & improvements for Loongson 3 systems.
- DT & config updates for the Microsemi Ocelot platform.
- Workaround to enable USB power on the Netgear WNDR3400v3.
- Various cleanups & fixes.
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQRgLjeFAZEXQzy86/s+p5+stXUA3QUCW9NfwRUccGF1bC5idXJ0
b25AbWlwcy5jb20ACgkQPqefrLV1AN1LNgD9Hy73DkYnnYeLNLcCe+5QMCr+NO2C
kwIs7kAI40X+/LQA/RgCcg6z4rUSH38hfNEobD6VXva7QiFhiYcJj5rCFH8O
=nDQg
-----END PGP SIGNATURE-----
Merge tag 'mips_4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Paul Burton:
- kexec support for the generic MIPS platform when running on a CPU
including the MIPS Coherence Manager & related hardware.
- Improvements to the definition of memory barriers used around MMIO
accesses, and fixes in their use.
- Switch to CONFIG_NO_BOOTMEM from Mike Rapoport, finally dropping
reliance on the old bootmem code.
- A number of fixes & improvements for Loongson 3 systems.
- DT & config updates for the Microsemi Ocelot platform.
- Workaround to enable USB power on the Netgear WNDR3400v3.
- Various cleanups & fixes.
* tag 'mips_4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (51 commits)
MIPS: Cleanup DSP ASE detection
MIPS: dts: Change upper case to lower case
MIPS: generic: Add Network, SPI and I2C to ocelot_defconfig
MIPS: Loongson-3: Fix BRIDGE irq delivery problem
MIPS: Loongson-3: Fix CPU UART irq delivery problem
MIPS: Remove unused PREF, PREFE & PREFX macros
MIPS: lib: Use kernel_pref & user_pref in memcpy()
MIPS: Remove unused CAT macro
MIPS: Add kernel_pref & user_pref helpers
MIPS: Remove unused TTABLE macro
MIPS: Remove unused PIC macros
MIPS: Remove unused MOVN & MOVZ macros
MIPS: Provide actually relaxed MMIO accessors
MIPS: Enforce strong ordering for MMIO accessors
MIPS: Correct `mmiowb' barrier for `wbflush' platforms
MIPS: Define MMIO ordering barriers
MIPS: mscc: add PCB120 to the ocelot fitImage
MIPS: mscc: add DT for Ocelot PCB120
MIPS: memset: Limit excessive `noreorder' assembly mode use
MIPS: memset: Fix CPU_DADDI_WORKAROUNDS `small_fixup' regression
...
hey-ho here they are now:
- A fix for potential poor stack placement introduced in v4.19-rc8.
- A fix for a warning introduced in use of TURBOchannel devices by DMA
changes in v4.16.
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQRgLjeFAZEXQzy86/s+p5+stXUA3QUCW9JT+BUccGF1bC5idXJ0
b25AbWlwcy5jb20ACgkQPqefrLV1AN04kAD+J5UyiYrjfp1cdKmO5uHpd/3+eMXy
K+yt1fLI3u8dkS4A/3gFW+fY9ZWFXHKTtmIFt0cvg6nn1cI9XWAPSxuIl/UO
=SilC
-----END PGP SIGNATURE-----
Merge tag 'mips_fixes_4.20_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Paul Burton:
"A couple of MIPS fixes that should have ideally made it for v4.19, but
hey-ho here they are now:
- A fix for potential poor stack placement introduced in v4.19-rc8.
- A fix for a warning introduced in use of TURBOchannel devices by
DMA changes in v4.16"
* tag 'mips_fixes_4.20_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: VDSO: Reduce VDSO_RANDOMIZE_SIZE to 64MB for 64bit
TC: Set DMA masks for devices
- Sync dtc with upstream version v1.4.7-14-gc86da84d30e4
- Work to get rid of direct accesses to struct device_node name and
type pointers in preparation for removing them. New helpers for
parsing DT cpu nodes and conversions to use the helpers. printk
conversions to %pOFn for printing DT node names. Most went thru
subystem trees, so this is the remainder.
- Fixes to DT child node lookups to actually be restricted to child
nodes instead of treewide.
- Refactoring of dtb targets out of arch code. This makes the support
more uniform and enables building all dtbs on c6x, microblaze, and
powerpc.
- Various DT binding updates for Renesas r8a7744 SoC
- Vendor prefixes for Facebook, OLPC
- Restructuring of some ARM binding docs moving some peripheral bindings
out of board/SoC binding files
- New "secure-chosen" binding for secure world settings on ARM
- Dual licensing of 2 DT IRQ binding headers
-----BEGIN PGP SIGNATURE-----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=335v
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull Devicetree updates from Rob Herring:
"A bit bigger than normal as I've been busy this cycle.
There's a few things with dependencies and a few things subsystem
maintainers didn't pick up, so I'm taking them thru my tree.
The fixes from Johan didn't get into linux-next, but they've been
waiting for some time now and they are what's left of what subsystem
maintainers didn't pick up.
Summary:
- Sync dtc with upstream version v1.4.7-14-gc86da84d30e4
- Work to get rid of direct accesses to struct device_node name and
type pointers in preparation for removing them. New helpers for
parsing DT cpu nodes and conversions to use the helpers. printk
conversions to %pOFn for printing DT node names. Most went thru
subystem trees, so this is the remainder.
- Fixes to DT child node lookups to actually be restricted to child
nodes instead of treewide.
- Refactoring of dtb targets out of arch code. This makes the support
more uniform and enables building all dtbs on c6x, microblaze, and
powerpc.
- Various DT binding updates for Renesas r8a7744 SoC
- Vendor prefixes for Facebook, OLPC
- Restructuring of some ARM binding docs moving some peripheral
bindings out of board/SoC binding files
- New "secure-chosen" binding for secure world settings on ARM
- Dual licensing of 2 DT IRQ binding headers"
* tag 'devicetree-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (78 commits)
ARM: dt: relicense two DT binding IRQ headers
power: supply: twl4030-charger: fix OF sibling-node lookup
NFC: nfcmrvl_uart: fix OF child-node lookup
net: stmmac: dwmac-sun8i: fix OF child-node lookup
net: bcmgenet: fix OF child-node lookup
drm/msm: fix OF child-node lookup
drm/mediatek: fix OF sibling-node lookup
of: Add missing exports of node name compare functions
dt-bindings: Add OLPC vendor prefix
dt-bindings: misc: bk4: Add device tree binding for Liebherr's BK4 SPI bus
dt-bindings: thermal: samsung: Add SPDX license identifier
dt-bindings: clock: samsung: Add SPDX license identifiers
dt-bindings: timer: ostm: Add R7S9210 support
dt-bindings: phy: rcar-gen2: Add r8a7744 support
dt-bindings: can: rcar_can: Add r8a7744 support
dt-bindings: timer: renesas, cmt: Document r8a7744 CMT support
dt-bindings: watchdog: renesas-wdt: Document r8a7744 support
dt-bindings: thermal: rcar: Add device tree support for r8a7744
Documentation: dt: Add binding for /secure-chosen/stdout-path
dt-bindings: arm: zte: Move sysctrl bindings to their own doc
...
Pull timekeeping updates from Thomas Gleixner:
"The timers and timekeeping departement provides:
- Another large y2038 update with further preparations for providing
the y2038 safe timespecs closer to the syscalls.
- An overhaul of the SHCMT clocksource driver
- SPDX license identifier updates
- Small cleanups and fixes all over the place"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits)
tick/sched : Remove redundant cpu_online() check
clocksource/drivers/dw_apb: Add reset control
clocksource: Remove obsolete CLOCKSOURCE_OF_DECLARE
clocksource/drivers: Unify the names to timer-* format
clocksource/drivers/sh_cmt: Add R-Car gen3 support
dt-bindings: timer: renesas: cmt: document R-Car gen3 support
clocksource/drivers/sh_cmt: Properly line-wrap sh_cmt_of_table[] initializer
clocksource/drivers/sh_cmt: Fix clocksource width for 32-bit machines
clocksource/drivers/sh_cmt: Fixup for 64-bit machines
clocksource/drivers/sh_tmu: Convert to SPDX identifiers
clocksource/drivers/sh_mtu2: Convert to SPDX identifiers
clocksource/drivers/sh_cmt: Convert to SPDX identifiers
clocksource/drivers/renesas-ostm: Convert to SPDX identifiers
clocksource: Convert to using %pOFn instead of device_node.name
tick/broadcast: Remove redundant check
RISC-V: Request newstat syscalls
y2038: signal: Change rt_sigtimedwait to use __kernel_timespec
y2038: socket: Change recvmmsg to use __kernel_timespec
y2038: sched: Change sched_rr_get_interval to use __kernel_timespec
y2038: utimes: Rework #ifdef guards for compat syscalls
...
Change this time round are:
- Support for ColdFire mcf5441x edma controller
- Support for link list mode in sprd dma
- More users of managed dmaenginem_async_device_register API
- Cyclic mode support in owl dma driver
- DT updates for renesas drivers, dma-jz4780 updates and support for
JZ4770, JZ4740 and JZ4725B controllers
- Removal of deprecated dma_slave_config direction in dmaengine drivers,
few more users will be removed in next cycle and eventually users.
- Minor updates to idma64, ioat, pxa, ppc drivers
-----BEGIN PGP SIGNATURE-----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=/pTg
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-4.20-rc1' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine updates from Vinod Koul:
- Support for ColdFire mcf5441x edma controller
- Support for link list mode in sprd dma
- More users of managed dmaenginem_async_device_register API
- Cyclic mode support in owl dma driver
- DT updates for renesas drivers, dma-jz4780 updates and support for
JZ4770, JZ4740 and JZ4725B controllers
- Removal of deprecated dma_slave_config direction in dmaengine
drivers, few more users will be removed in next cycle and eventually
removed.
- Minor updates to idma64, ioat, pxa, ppc drivers
* tag 'dmaengine-4.20-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (66 commits)
dmaengine: ppc4xx: fix off-by-one build failure
dmaengine: owl: Fix warnings generated during build
dmaengine: fsl-edma: remove dma_slave_config direction usage
dmaengine: rcar-dmac: set scatter/gather max segment size
dmaengine: mmp_tdma: remove dma_slave_config direction usage
dmaengine: ep93xx_dma: remove dma_slave_config direction usage
dmaengine: k3dma: remove dma_slave_config direction usage
dmaengine: k3dma: dont use direction for memcpy
dmaengine: imx-dma: remove dma_slave_config direction usage
dmaengine: idma: remove dma_slave_config direction usage
dmaengine: hsu: remove dma_slave_config direction usage
dmaengine: dw: remove dma_slave_config direction usage
dmaengine: jz4740: remove dma_slave_config direction usage
dmaengine: coh901318: remove dma_slave_config direction usage
dmaengine: bcm2835: remove dma_slave_config direction usage
dmaengine: at_hdmac: remove dma_slave_config direction usage
dmaengine: owl: Add Slave and Cyclic mode support for Actions Semi Owl S900 SoC
dmaengine: ioat: fix prototype of ioat_enumerate_channels
dmaengine: stm32-dma: check whether length is aligned on FIFO threshold
dt-bindings: dmaengine: usb-dmac: Add binding for r8a7744
...
Pull siginfo updates from Eric Biederman:
"I have been slowly sorting out siginfo and this is the culmination of
that work.
The primary result is in several ways the signal infrastructure has
been made less error prone. The code has been updated so that manually
specifying SEND_SIG_FORCED is never necessary. The conversion to the
new siginfo sending functions is now complete, which makes it
difficult to send a signal without filling in the proper siginfo
fields.
At the tail end of the patchset comes the optimization of decreasing
the size of struct siginfo in the kernel from 128 bytes to about 48
bytes on 64bit. The fundamental observation that enables this is by
definition none of the known ways to use struct siginfo uses the extra
bytes.
This comes at the cost of a small user space observable difference.
For the rare case of siginfo being injected into the kernel only what
can be copied into kernel_siginfo is delivered to the destination, the
rest of the bytes are set to 0. For cases where the signal and the
si_code are known this is safe, because we know those bytes are not
used. For cases where the signal and si_code combination is unknown
the bits that won't fit into struct kernel_siginfo are tested to
verify they are zero, and the send fails if they are not.
I made an extensive search through userspace code and I could not find
anything that would break because of the above change. If it turns out
I did break something it will take just the revert of a single change
to restore kernel_siginfo to the same size as userspace siginfo.
Testing did reveal dependencies on preferring the signo passed to
sigqueueinfo over si->signo, so bit the bullet and added the
complexity necessary to handle that case.
Testing also revealed bad things can happen if a negative signal
number is passed into the system calls. Something no sane application
will do but something a malicious program or a fuzzer might do. So I
have fixed the code that performs the bounds checks to ensure negative
signal numbers are handled"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (80 commits)
signal: Guard against negative signal numbers in copy_siginfo_from_user32
signal: Guard against negative signal numbers in copy_siginfo_from_user
signal: In sigqueueinfo prefer sig not si_signo
signal: Use a smaller struct siginfo in the kernel
signal: Distinguish between kernel_siginfo and siginfo
signal: Introduce copy_siginfo_from_user and use it's return value
signal: Remove the need for __ARCH_SI_PREABLE_SIZE and SI_PAD_SIZE
signal: Fail sigqueueinfo if si_signo != sig
signal/sparc: Move EMT_TAGOVF into the generic siginfo.h
signal/unicore32: Use force_sig_fault where appropriate
signal/unicore32: Generate siginfo in ucs32_notify_die
signal/unicore32: Use send_sig_fault where appropriate
signal/arc: Use force_sig_fault where appropriate
signal/arc: Push siginfo generation into unhandled_exception
signal/ia64: Use force_sig_fault where appropriate
signal/ia64: Use the force_sig(SIGSEGV,...) in ia64_rt_sigreturn
signal/ia64: Use the generic force_sigsegv in setup_frame
signal/arm/kvm: Use send_sig_mceerr
signal/arm: Use send_sig_fault where appropriate
signal/arm: Use force_sig_fault where appropriate
...
Pull networking updates from David Miller:
1) Add VF IPSEC offload support in ixgbe, from Shannon Nelson.
2) Add zero-copy AF_XDP support to i40e, from Björn Töpel.
3) All in-tree drivers are converted to {g,s}et_link_ksettings() so we
can get rid of the {g,s}et_settings ethtool callbacks, from Michal
Kubecek.
4) Add software timestamping to veth driver, from Michael Walle.
5) More work to make packet classifiers and actions lockless, from Vlad
Buslov.
6) Support sticky FDB entries in bridge, from Nikolay Aleksandrov.
7) Add ipv6 version of IP_MULTICAST_ALL sockopt, from Andre Naujoks.
8) Support batching of XDP buffers in vhost_net, from Jason Wang.
9) Add flow dissector BPF hook, from Petar Penkov.
10) i40e vf --> generic iavf conversion, from Jesse Brandeburg.
11) Add NLA_REJECT netlink attribute policy type, to signal when users
provide attributes in situations which don't make sense. From
Johannes Berg.
12) Switch TCP and fair-queue scheduler over to earliest departure time
model. From Eric Dumazet.
13) Improve guest receive performance by doing rx busy polling in tx
path of vhost networking driver, from Tonghao Zhang.
14) Add per-cgroup local storage to bpf
15) Add reference tracking to BPF, from Joe Stringer. The verifier can
now make sure that references taken to objects are properly released
by the program.
16) Support in-place encryption in TLS, from Vakul Garg.
17) Add new taprio packet scheduler, from Vinicius Costa Gomes.
18) Lots of selftests additions, too numerous to mention one by one here
but all of which are very much appreciated.
19) Support offloading of eBPF programs containing BPF to BPF calls in
nfp driver, frm Quentin Monnet.
20) Move dpaa2_ptp driver out of staging, from Yangbo Lu.
21) Lots of u32 classifier cleanups and simplifications, from Al Viro.
22) Add new strict versions of netlink message parsers, and enable them
for some situations. From David Ahern.
23) Evict neighbour entries on carrier down, also from David Ahern.
24) Support BPF sk_msg verdict programs with kTLS, from Daniel Borkmann
and John Fastabend.
25) Add support for filtering route dumps, from David Ahern.
26) New igc Intel driver for 2.5G parts, from Sasha Neftin et al.
27) Allow vxlan enslavement to bridges in mlxsw driver, from Ido
Schimmel.
28) Add queue and stack map types to eBPF, from Mauricio Vasquez B.
29) Add back byte-queue-limit support to r8169, with all the bug fixes
in other areas of the driver it works now! From Florian Westphal and
Heiner Kallweit.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2147 commits)
tcp: add tcp_reset_xmit_timer() helper
qed: Fix static checker warning
Revert "be2net: remove desc field from be_eq_obj"
Revert "net: simplify sock_poll_wait"
net: socionext: Reset tx queue in ndo_stop
net: socionext: Add dummy PHY register read in phy_write()
net: socionext: Stop PHY before resetting netsec
net: stmmac: Set OWN bit for jumbo frames
arm64: dts: stratix10: Support Ethernet Jumbo frame
tls: Add maintainers
net: ethernet: ti: cpsw: unsync mcast entries while switch promisc mode
octeontx2-af: Support for NIXLF's UCAST/PROMISC/ALLMULTI modes
octeontx2-af: Support for setting MAC address
octeontx2-af: Support for changing RSS algorithm
octeontx2-af: NIX Rx flowkey configuration for RSS
octeontx2-af: Install ucast and bcast pkt forwarding rules
octeontx2-af: Add LMAC channel info to NIXLF_ALLOC response
octeontx2-af: NPC MCAM and LDATA extract minimal configuration
octeontx2-af: Enable packet length and csum validation
octeontx2-af: Support for VTAG strip and capture
...
Core changes:
- A patch series from Hans Verkuil to make it possible to
enable/disable IRQs on a GPIO line at runtime and drive GPIO
lines as output without having to put/get them from scratch.
The irqchip callbacks have been improved so that they can
use only the fastpatch callbacks to enable/disable irqs
like any normal irqchip, especially the gpiod_lock_as_irq()
has been improved to be callable in fastpath context.
A bunch of rework had to be done to achieve this but it is
a big win since I never liked to restrict this to slowpath.
The only call requireing slowpath was try_module_get() and
this is kept at the .request_resources() slowpath callback.
In the GPIO CEC driver this is a big win sine a single
line is used for both outgoing and incoming traffic, and
this needs to use IRQs for incoming traffic while actively
driving the line for outgoing traffic.
- Janusz Krzysztofik improved the GPIO array API to pass a
"cookie" (struct gpio_array) and a bitmap for setting or
getting multiple GPIO lines at once. This improvement
orginated in a specific need to speed up an OMAP1 driver and
has led to a much better API and real performance gains
when the state of the array can be used to bypass a lot
of checks and code when we want things to go really fast.
The previous code would minimize the number of calls
down to the driver callbacks assuming the CPU speed was
orders of magnitude faster than the I/O latency, but this
assumption was wrong on several platforms: what we needed
to do was to profile and improve the speed on the hot
path of the array functions and this change is now
completed.
- Clean out the painful and hard to grasp BNF experiments
from the device tree bindings. Future approaches are looking
into using JSON schema for this purpose. (Rob Herring
is floating a patch series.)
New drivers:
- The RCAR driver now supports r8a774a1 (RZ/G2M).
- Synopsys GPIO via CREGs driver.
Major improvements:
- Modernization of the EP93xx driver to use irqdomain and
other contemporary concepts.
- The ingenic driver has been merged into the Ingenic pin
control driver and removed from the GPIO subsystem.
- Debounce support in the ftgpio010 driver.
-----BEGIN PGP SIGNATURE-----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=YosT
-----END PGP SIGNATURE-----
Merge tag 'gpio-v4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for the v4.20 series:
Core changes:
- A patch series from Hans Verkuil to make it possible to
enable/disable IRQs on a GPIO line at runtime and drive GPIO lines
as output without having to put/get them from scratch.
The irqchip callbacks have been improved so that they can use only
the fastpatch callbacks to enable/disable irqs like any normal
irqchip, especially the gpiod_lock_as_irq() has been improved to be
callable in fastpath context.
A bunch of rework had to be done to achieve this but it is a big
win since I never liked to restrict this to slowpath. The only call
requireing slowpath was try_module_get() and this is kept at the
.request_resources() slowpath callback. In the GPIO CEC driver this
is a big win sine a single line is used for both outgoing and
incoming traffic, and this needs to use IRQs for incoming traffic
while actively driving the line for outgoing traffic.
- Janusz Krzysztofik improved the GPIO array API to pass a "cookie"
(struct gpio_array) and a bitmap for setting or getting multiple
GPIO lines at once.
This improvement orginated in a specific need to speed up an OMAP1
driver and has led to a much better API and real performance gains
when the state of the array can be used to bypass a lot of checks
and code when we want things to go really fast.
The previous code would minimize the number of calls down to the
driver callbacks assuming the CPU speed was orders of magnitude
faster than the I/O latency, but this assumption was wrong on
several platforms: what we needed to do was to profile and improve
the speed on the hot path of the array functions and this change is
now completed.
- Clean out the painful and hard to grasp BNF experiments from the
device tree bindings. Future approaches are looking into using JSON
schema for this purpose. (Rob Herring is floating a patch series.)
New drivers:
- The RCAR driver now supports r8a774a1 (RZ/G2M).
- Synopsys GPIO via CREGs driver.
Major improvements:
- Modernization of the EP93xx driver to use irqdomain and other
contemporary concepts.
- The ingenic driver has been merged into the Ingenic pin control
driver and removed from the GPIO subsystem.
- Debounce support in the ftgpio010 driver"
* tag 'gpio-v4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (116 commits)
gpio: Clarify kerneldoc on gpiochip_set_chained_irqchip()
gpio: Remove unused 'irqchip' argument to gpiochip_set_cascaded_irqchip()
gpio: Drop parent irq assignment during cascade setup
mmc: pwrseq_simple: Fix incorrect handling of GPIO bitmap
gpio: fix SNPS_CREG kconfig dependency warning
gpiolib: Initialize gdev field before is used
gpio: fix kernel-doc after devres.c file rename
gpio: fix doc string for devm_gpiochip_add_data() to not talk about irq_chip
gpio: syscon: Fix possible NULL ptr usage
gpiolib: Show correct direction from the beginning
pinctrl: msm: Use init_valid_mask exported function
gpiolib: Add init_valid_mask exported function
GPIO: add single-register GPIO via CREG driver
dt-bindings: Document the Synopsys GPIO via CREG bindings
gpio: mockup: use device properties instead of platform_data
gpio: Slightly more helpful debugfs
gpio: omap: Remove set but not used variable 'dev'
gpio: omap: drop omap_gpio_list
Accept partial 'gpio-line-names' property.
gpio: omap: get rid of the conditional PM runtime calls
...
Core changes:
* Support non-uniform erase size
* Support controllers with limited TX fifo size
Driver changes:
* m25p80: Re-issue a WREN command after each write access
* cadence: Pass a proper dir value to dma_[un]map_single()
* fsl-qspi: Check fsl_qspi_get_seqid() return val make sure 4B
addressing opcodes are properly handled
* intel-spi: Add a new PCI entry for Ice Lake
NAND changes:
Raw NAND core changes:
- Two batchs of cleanups of the NAND API, including:
* Deprecating a lot of interfaces (now replaced by ->exec_op()).
* Moving code in separate drivers (JEDEC, ONFI), in private files
(internals), in platform drivers, etc.
* Functions/structures reordering.
* Exclusive use of the nand_chip structure instead of the MTD one
all across the subsystem.
- Addition of the nand_wait_readrdy/rdy_op() helpers.
Raw NAND controllers drivers changes:
- Various coccinelle patches.
- Marvell:
* Use regmap_update_bits() for syscon access.
* More documentation.
* BCH failure path rework.
* More layouts to be supported.
* IRQ handler complete() condition fixed.
- Fsl_ifc:
* SRAM initialization fixed for newer controller versions.
- Denali:
* Fix licenses mismatch and use a SPDX tag.
* Set SPARE_AREA_SKIP_BYTES register to 8 if unset.
- Qualcomm:
* Do not include dma-direct.h.
- Docg4:
* Removed.
- Ams-delta:
* Use of a GPIO lookup table
* Internal machinery changes.
Raw NAND chip drivers changes:
- Toshiba:
* Add support for Toshiba memory BENAND
* Pass a single nand_chip object to the status helper.
- ESMT:
* New driver to retrieve the ECC requirements from the 5th ID byte.
MTD changes:
* physmap cleanups/fixe
* gpio-addr-flash cleanups/fixes
-----BEGIN PGP SIGNATURE-----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=7w4w
-----END PGP SIGNATURE-----
Merge tag 'mtd/for-4.20' of git://git.infradead.org/linux-mtd
Pull mtd updates from Boris Brezillon:
"SPI NOR core changes:
- Support non-uniform erase size
- Support controllers with limited TX fifo size
Driver changes:
- m25p80: Re-issue a WREN command after each write access
- cadence: Pass a proper dir value to dma_[un]map_single()
- fsl-qspi: Check fsl_qspi_get_seqid() return val make sure 4B
addressing opcodes are properly handled
- intel-spi: Add a new PCI entry for Ice Lake
Raw NAND core changes:
- Two batchs of cleanups of the NAND API, including:
* Deprecating a lot of interfaces (now replaced by ->exec_op()).
* Moving code in separate drivers (JEDEC, ONFI), in private files
(internals), in platform drivers, etc.
* Functions/structures reordering.
* Exclusive use of the nand_chip structure instead of the MTD one
all across the subsystem.
- Addition of the nand_wait_readrdy/rdy_op() helpers.
Raw NAND controllers drivers changes:
- Various coccinelle patches.
- Marvell:
* Use regmap_update_bits() for syscon access.
* More documentation.
* BCH failure path rework.
* More layouts to be supported.
* IRQ handler complete() condition fixed.
- Fsl_ifc:
* SRAM initialization fixed for newer controller versions.
- Denali:
* Fix licenses mismatch and use a SPDX tag.
* Set SPARE_AREA_SKIP_BYTES register to 8 if unset.
- Qualcomm:
* Do not include dma-direct.h.
- Docg4:
* Removed.
- Ams-delta:
* Use of a GPIO lookup table
* Internal machinery changes.
Raw NAND chip drivers changes:
- Toshiba:
* Add support for Toshiba memory BENAND
* Pass a single nand_chip object to the status helper.
- ESMT:
* New driver to retrieve the ECC requirements from the 5th ID
byte.
MTD changes:
- physmap cleanups/fixe
- gpio-addr-flash cleanups/fixes"
* tag 'mtd/for-4.20' of git://git.infradead.org/linux-mtd: (93 commits)
jffs2: free jffs2_sb_info through jffs2_kill_sb()
mtd: spi-nor: fsl-quadspi: fix read error for flash size larger than 16MB
mtd: spi-nor: intel-spi: Add support for Intel Ice Lake SPI serial flash
mtd: maps: gpio-addr-flash: Convert to gpiod
mtd: maps: gpio-addr-flash: Replace array with an integer
mtd: maps: gpio-addr-flash: Use order instead of size
mtd: spi-nor: fsl-quadspi: Don't let -EINVAL on the bus
mtd: devices: m25p80: Make sure WRITE_EN is issued before each write
mtd: spi-nor: Support controllers with limited TX FIFO size
mtd: spi-nor: cadence-quadspi: Use proper enum for dma_[un]map_single
mtd: spi-nor: parse SFDP Sector Map Parameter Table
mtd: spi-nor: add support to non-uniform SFDP SPI NOR flash memories
mtd: rawnand: marvell: fix the IRQ handler complete() condition
mtd: rawnand: denali: set SPARE_AREA_SKIP_BYTES register to 8 if unset
mtd: rawnand: r852: fix spelling mistake "card_registred" -> "card_registered"
mtd: rawnand: toshiba: Pass a single nand_chip object to the status helper
mtd: maps: gpio-addr-flash: Use devm_* functions
mtd: maps: gpio-addr-flash: Fix ioremapped size
mtd: maps: gpio-addr-flash: Replace custom printk
mtd: physmap_of: Release resources on error
...
- mostly more consolidation of the direct mapping code, including
converting over hexagon, and merging the coherent and non-coherent
code into a single dma_map_ops instance (me)
- cleanups for the dma_configure/dma_unconfigure callchains (me)
- better handling of dma_masks in odd setups (me, Alexander Duyck)
- better debugging of passing vmalloc address to the DMA API
(Stephen Boyd)
- CMA command line parsing fix (He Zhe)
-----BEGIN PGP SIGNATURE-----
iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAlvNg6YLHGhjaEBsc3Qu
ZGUACgkQD55TZVIEUYMm/Q/9FFVOH73Nc3rT40N2HdaPbzV2hXmI1//hEJcImDP5
mLGq8XqieGuo8Pmu9+xp1tC2UnfUkhK4FjhQbWM+qKER/RNYES2BD50xVFmt6ICS
9d8IaRcs+ceggljfdwszkkucJspBsYNxpiKjjao0OsHn6UDatu6elZs/yvb2nXci
HCJUvs9vYm9MkAtVXEtOQtij3YRaJ/9xYY4h5Dy5vBtHPp+kjUMF0mWAwA2+Ec1V
8iqKjUY3c8nr8Kf6WE9tzJ0wrMFijc4HJlE3W1ud8YsKdfCkCf8XiIuS6PgTzOeK
0cn9h8dVrV1ZXJ/D/9JZDivmYvIsoKWAYVQHNzAiq7PI3uOJY1ggCxyZpWtTHZhM
ATHF0sJGpIenkSWybYpKee8e8RsS7L9dUgu6bYpK5pVkirNYnR9IOGVJNmS63L7Q
B0uUtqjBKDG2yNGZGY9zqBQFgxiPO0wxFLeKyHbIsC0b7FBti3rXGAimch5WiBuL
zlDV0zEfMH0BW6gNPrjfFur84duKtGZ/0DBSxQ0E1Mvk8B1LBr78MgZt8OfJEuoe
dx1FYU70u8PYi+hjmn386YnNNMTjd1GT5XW7AWedM2wCjRYmNy0yMGmm9cACMneN
5eBv/SYr7X1zKNL7w7H6KQVZilTJcBoj3f/lmjL7i22m9FXYQpcUP61L8wHNM8H2
iJo=
=AVSD
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-4.20' of git://git.infradead.org/users/hch/dma-mapping
Pull dma mapping updates from Christoph Hellwig:
"First batch of dma-mapping changes for 4.20.
There will be a second PR as some big changes were only applied just
before the end of the merge window, and I want to give them a few more
days in linux-next.
Summary:
- mostly more consolidation of the direct mapping code, including
converting over hexagon, and merging the coherent and non-coherent
code into a single dma_map_ops instance (me)
- cleanups for the dma_configure/dma_unconfigure callchains (me)
- better handling of dma_masks in odd setups (me, Alexander Duyck)
- better debugging of passing vmalloc address to the DMA API (Stephen
Boyd)
- CMA command line parsing fix (He Zhe)"
* tag 'dma-mapping-4.20' of git://git.infradead.org/users/hch/dma-mapping: (27 commits)
dma-direct: respect DMA_ATTR_NO_WARN
dma-mapping: translate __GFP_NOFAIL to DMA_ATTR_NO_WARN
dma-direct: document the zone selection logic
dma-debug: Check for drivers mapping invalid addresses in dma_map_single()
dma-direct: fix return value of dma_direct_supported
dma-mapping: move dma_default_get_required_mask under ifdef
dma-direct: always allow dma mask <= physiscal memory size
dma-direct: implement complete bus_dma_mask handling
dma-direct: refine dma_direct_alloc zone selection
dma-direct: add an explicit dma_direct_get_required_mask
dma-mapping: make the get_required_mask method available unconditionally
unicore32: remove swiotlb support
Revert "dma-mapping: clear dev->dma_ops in arch_teardown_dma_ops"
dma-mapping: support non-coherent devices in dma_common_get_sgtable
dma-mapping: consolidate the dma mmap implementations
dma-mapping: merge direct and noncoherent ops
dma-mapping: move the dma_coherent flag to struct device
MIPS: don't select DMA_MAYBE_COHERENT from DMA_PERDEV_COHERENT
dma-mapping: add the missing ARCH_HAS_SYNC_DMA_FOR_CPU_ALL declaration
dma-mapping: fix panic caused by passing empty cma command line argument
...
Currently we hardcode a list of files for which we specify that the
toolchain has DSP ASE support when building for MIPSr2 only. This has a
number of problems:
1) It doesn't actually ensure that the toolchain supports the DSP ASE
at all.
2) It's fragile if we try to use DSP ASE macros in other files.
3) It makes no provision for MIPSr6 & later systems which also support
the DSP ASE & end up using the .word directive implementation of
the DSP macros.
Fix this by detecting assembler support for the DSP ASE globally, not
just for a small set of files, and not just for MIPSr2. This now exposes
use of toolchain DSP support to kernel builds targeting MIPSr1 and
older, so we add .set MIPS_ISA_LEVEL directives prior to all .set dsp
directives in order to prevent the assembler from complaining that the
DSP ASE is only supported with MIPSr2 & higher.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20901/
Cc: linux-mips@linux-mips.org
Commit ea7e0480a4 ("MIPS: VDSO: Always map near top of user memory")
set VDSO_RANDOMIZE_SIZE to 256MB for 64bit kernel. But take a look at
arch/mips/mm/mmap.c we can see that MIN_GAP is 128MB, which means the
mmap_base may be at (user_address_top - 128MB). This make the stack be
surrounded by mmaped areas, then stack expanding fails and causes a
segmentation fault. Therefore, VDSO_RANDOMIZE_SIZE should be less than
MIN_GAP and this patch reduce it to 64MB.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: ea7e0480a4 ("MIPS: VDSO: Always map near top of user memory")
Patchwork: https://patchwork.linux-mips.org/patch/20910/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: Huacai Chen <chenhuacai@gmail.com>
All the upper case in unit-address and hex constants are
changed to lower case according to the DT conventions.
Signed-off-by: Songjun Wu <songjun.wu@linux.intel.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Patchwork: https://patchwork.linux-mips.org/patch/20768/
Cc: yixin.zhu@linux.intel.com
Cc: chuanhua.lei@linux.intel.com
Cc: hauke.mehrtens@intel.com
Cc: devicetree@vger.kernel.org
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Add support for the integrated switch, and the SPI and I2C controller found
on MSCC Ocelot.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20345/
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
After commit e509bd7da1 ("genirq: Allow migration of chained
interrupts by installing default action") Loongson-3 fails at here:
setup_irq(LOONGSON_HT1_IRQ, &cascade_irqaction);
This is because both chained_action and cascade_irqaction don't have
IRQF_SHARED flag. This will cause Loongson-3 resume fails because HPET
timer interrupt can't be delivered during S3. So we set the irqchip of
the chained irq to loongson_irq_chip which doesn't disable the chained
irq in CP0.Status.
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20434/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: Huacai Chen <chenhuacai@gmail.com>
Masking/unmasking the CPU UART irq in CP0_Status (and redirecting it to
other CPUs) may cause interrupts be lost, especially in multi-package
machines (Package-0's UART irq cannot be delivered to others). So make
mask_loongson_irq() and unmask_loongson_irq() be no-ops.
The original problem (UART IRQ may deliver to any core) is also because
of masking/unmasking the CPU UART irq in CP0_Status. So it is safe to
remove all of the stuff.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20433/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: Huacai Chen <chenhuacai@gmail.com>
memcpy() is the only user of the PREF() & PREFE() macros from asm/asm.h.
Switch to using the kernel_pref() & user_pref() macros from
asm/asm-eva.h which fit more consistently with other abstractions of EVA
vs non-EVA instructions.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20907/
Cc: linux-mips@linux-mips.org
asm/asm.h provides a CAT macro which is unused throughout the tree, and
if anyone wanted it the generic CONCATENATE macro in linux/kernel.h
provides the same functionality. Delete the dead code.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20905/
Cc: linux-mips@linux-mips.org
Add kernel_pref & user_pref macros to asm/asm-eva.h, providing an
abstraction around EVA & non-EVA pref instructions consistent with the
existing macros we have for cache & load/store instructions.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20906/
Cc: linux-mips@linux-mips.org
asm/asm.h contains a TTABLE macro to generate "text tables" which would
appear to be arrays of pointers to strings. It is unused throughout the
kernel tree, so delete the dead code.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20904/
Cc: linux-mips@linux-mips.org
asm/asm.h contains CPRESTORE, CPADD & CPLOAD macros that are intended
for use with position independent code, but are not used anywhere in the
kernel - along with a comment to that effect. Remove the dead code.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20903/
Cc: linux-mips@linux-mips.org
We have macros in asm/asm.h to allow for use of the MOVN & MOVZ
instructions with compare-and-branch sequences providing compatibility
for ISA versions which don't include those instructions. However the
macros are unused, and appear to have always been unused. Delete the
dead code.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20909/
Cc: linux-mips@linux-mips.org
Conflicts were easy to resolve using immediate context mostly,
except the cls_u32.c one where I simply too the entire HEAD
chunk.
Signed-off-by: David S. Miller <davem@davemloft.net>
Improve performance for the relevant systems and remove the DMA ordering
barrier from `readX_relaxed' and `writeX_relaxed' MMIO accessors, where
it is not needed according to our requirements[1]. For consistency make
the same arrangement with low-level port I/O accessors, but do not
actually provide any accessors making use of it.
References:
[1] "LINUX KERNEL MEMORY BARRIERS", Documentation/memory-barriers.txt,
Section "KERNEL I/O BARRIER EFFECTS"
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20865/
Cc: Ralf Baechle <ralf@linux-mips.org>
Architecturally the MIPS ISA does not specify ordering requirements for
uncached bus accesses such as MMIO operations normally use and therefore
explicit barriers have to be inserted between MMIO accesses where
unspecified ordering of operations would cause unpredictable results.
For example the R2020 write buffer implements write gathering and
combining[1] and as used with the DECstation models 2100 and 3100 for
MMIO accesses it bypasses the read buffer entirely, because conflicts
are resolved by the memory controller for DRAM accesses only[2] (NB the
R2020 and R3020 buffers are the same except for the maximum clock rate).
Consequently if a device has say a 16-bit control register at offset 0,
a 16-bit event mask register at offset 2 and a 16-bit reset register at
offset 4, and the initial value of the control register is 0x1111, then
in the absence of barriers a hypothetical code sequence like this:
u16 init_dev(u16 __iomem *dev);
u16 x;
write16(dev + 2, 0xffff);
write16(dev + 0, 0x2222);
x = read16(dev + 0);
write16(dev + 1, 0x3333);
write16(dev + 0, 0x4444);
return x;
}
will return 0x1111 and issue a single 32-bit write of 0x33334444 (in the
little-endian bus configuration) to offset 0 on the system bus.
This is because the read to set `x' from offset 0 bypasses the write of
0x2222 that is still in the write buffer pending the completion of the
write of 0xffff to the reset register. Then the write of 0x3333 to the
event mask register is merged with the preceding write to the control
register as they share the same word address, making it a 32-bit write
of 0x33332222 to offset 0. Finally the write of 0x4444 to the control
register is combined with the outstanding 32-bit write of 0x33332222 to
offset 0, because, again, it shares the same address.
This is an example from a legacy system, given here because it is well
documented and affects a machine we actually support. But likewise
modern MIPS systems may implement weak MMIO ordering, possibly even
without having it clearly documented except for being compliant with the
architecture specification with respect to the currently defined SYNC
instruction variants[3].
Considering the above and that we are required to implement MMIO
accessors such that individual accesses made with them are strongly
ordered with respect to each other[4], add the necessary barriers to our
`inX', `outX', `readX' and `writeX' handlers, as well the associated
special use variants. It's up to platforms then to possibly define the
respective barriers so as to expand to nil if no ordering enforcement is
actually needed for a given system; SYNC is supposed to be as cheap as
a NOP on strongly ordered MIPS implementations though.
Retain the option to generate weakly-ordered accessors, so that the
arrangement for `war_io_reorder_wmb' is not lost in case we need it for
fully raw accessors in the future. The reason for this is that it is
unclear from commit 1e820da3c9 ("MIPS: Loongson-3: Introduce
CONFIG_LOONGSON3_ENHANCEMENT") and especially commit 8faca49a67
("MIPS: Modify core io.h macros to account for the Octeon Errata
Core-301.") why they are needed there under the previous assumption that
these accessors can be weakly ordered.
References:
[1] "LR3020 Write Buffer", LSI Logic Corporation, September 1988,
Section "Byte Gathering", pp. 6-7
[2] "DECstation 3100 Desktop Workstation Functional Specification",
Digital Equipment Corporation, Revision 1.3, August 28, 1990,
Section 6.1 "Processor", p. 4
[3] "MIPS Architecture For Programmers, Volume II-A: The MIPS32
Instruction Set Manual", Imagination Technologies LTD, Document
Number: MD00086, Revision 6.06, December 15, 2016, Table 5.5
"Encodings of the Bits[10:6] of the SYNC instruction; the SType
Field", p. 409
[4] "LINUX KERNEL MEMORY BARRIERS", Documentation/memory-barriers.txt,
Section "KERNEL I/O BARRIER EFFECTS"
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
References: 8faca49a67 ("MIPS: Modify core io.h macros to account for the Octeon Errata Core-301.")
References: 1e820da3c9 ("MIPS: Loongson-3: Introduce CONFIG_LOONGSON3_ENHANCEMENT")
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20864/
Cc: Ralf Baechle <ralf@linux-mips.org>
Redefine `mmiowb' in terms of `iobarrier_w' so that it works correctly
for MIPS I platforms, which have no SYNC machine instruction and use a
call to `wbflush' instead.
This doesn't change the semantics for CONFIG_CPU_CAVIUM_OCTEON, because
`iobarrier_w' expands to `wmb', which is ultimately the same as the
current arrangement. For MIPS I platforms this not only makes any code
that would happen to use `mmiowb' build and run, but it actually
enforces the ordering required as well, as `iobarrier_w' has it already
covered with the use of `wmb'.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20863/
Cc: Ralf Baechle <ralf@linux-mips.org>
Define MMIO ordering barriers as separate operations so as to allow
making places where such a barrier is required distinct from places
where a memory or a DMA barrier is needed.
Architecturally MIPS does not specify ordering requirements for uncached
bus accesses such as MMIO operations normally use and therefore explicit
barriers have to be inserted between MMIO accesses where unspecified
ordering of operations would cause unpredictable results.
MIPS MMIO ordering barriers are implemented using the same underlying
mechanism that memory or a DMA barrier ordering barriers use, that is
either a suitable SYNC instruction or a platform-specific `wbflush'
call. However platforms may implement different ordering rules for
different kinds of bus activity, so having a separate API makes it
possible to remove unnecessary barriers and avoid a performance hit they
may cause due to unrelated bus activity by making their implementation
expand to nil while keeping the necessary ones.
Also having distinct barriers for each kind of use makes it easier for
the reader to understand what code has been intended to do.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20862/
Cc: Ralf Baechle <ralf@linux-mips.org>
Rewrite to use the `reorder' assembly mode and remove manually scheduled
delay slots except where GAS cannot schedule a delay-slot instruction
due to a data dependency or a section switch (as is the case with the EX
macro). No change in machine code produced.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
[paul.burton@mips.com:
Fix conflict with commit 932afdeec1 ("MIPS: Add Kconfig variable for
CPUs with unaligned load/store instructions")]
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20834/
Cc: Ralf Baechle <ralf@linux-mips.org>
Fix a commit 8a8158c85e ("MIPS: memset.S: EVA & fault support for
small_memset") regression and remove assembly warnings:
arch/mips/lib/memset.S: Assembler messages:
arch/mips/lib/memset.S:243: Warning: Macro instruction expanded into multiple instructions in a branch delay slot
triggering with the CPU_DADDI_WORKAROUNDS option set and this code:
PTR_SUBU a2, t1, a0
jr ra
PTR_ADDIU a2, 1
This is because with that option in place the DADDIU instruction, which
the PTR_ADDIU CPP macro expands to, becomes a GAS macro, which in turn
expands to an LI/DADDU (or actually ADDIU/DADDU) sequence:
13c: 01a4302f dsubu a2,t1,a0
140: 03e00008 jr ra
144: 24010001 li at,1
148: 00c1302d daddu a2,a2,at
...
Correct this by switching off the `noreorder' assembly mode and letting
GAS schedule this jump's delay slot, as there is nothing special about
it that would require manual scheduling. With this change in place
correct code is produced:
13c: 01a4302f dsubu a2,t1,a0
140: 24010001 li at,1
144: 03e00008 jr ra
148: 00c1302d daddu a2,a2,at
...
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: 8a8158c85e ("MIPS: memset.S: EVA & fault support for small_memset")
Patchwork: https://patchwork.linux-mips.org/patch/20833/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: stable@vger.kernel.org # 4.17+
The Microsemi Ocelot has a set of register for SerDes/switch port muxing
as well as PCIe muxing for a specific SerDes, so let's add the device
and all SerDes in the Device Tree.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
HSIO contains registers for PLL5 configuration, SerDes/switch port
muxing and a thermal sensor, hence we can't keep it in the switch DT
node.
Acked-by: Paul Burton <paul.burton@mips.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix a commit 8a8158c85e ("MIPS: memset.S: EVA & fault support for
small_memset") regression and remove assembly warnings:
arch/mips/lib/memset.S: Assembler messages:
arch/mips/lib/memset.S:243: Warning: Macro instruction expanded into multiple instructions in a branch delay slot
triggering with the CPU_DADDI_WORKAROUNDS option set and this code:
PTR_SUBU a2, t1, a0
jr ra
PTR_ADDIU a2, 1
This is because with that option in place the DADDIU instruction, which
the PTR_ADDIU CPP macro expands to, becomes a GAS macro, which in turn
expands to an LI/DADDU (or actually ADDIU/DADDU) sequence:
13c: 01a4302f dsubu a2,t1,a0
140: 03e00008 jr ra
144: 24010001 li at,1
148: 00c1302d daddu a2,a2,at
...
Correct this by switching off the `noreorder' assembly mode and letting
GAS schedule this jump's delay slot, as there is nothing special about
it that would require manual scheduling. With this change in place
correct code is produced:
13c: 01a4302f dsubu a2,t1,a0
140: 24010001 li at,1
144: 03e00008 jr ra
148: 00c1302d daddu a2,a2,at
...
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: 8a8158c85e ("MIPS: memset.S: EVA & fault support for small_memset")
Patchwork: https://patchwork.linux-mips.org/patch/20833/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: stable@vger.kernel.org # 4.17+
Rework the defintion of struct siginfo so that the array padding
struct siginfo to SI_MAX_SIZE can be placed in a union along side of
the rest of the struct siginfo members. The result is that we no
longer need the __ARCH_SI_PREAMBLE_SIZE or SI_PAD_SIZE definitions.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
platform_nand_xxx definitions are just used by the plat_nand driver.
Let's move those definitions out of the core/driver-agnostic rawnand.h
header.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
We regularly have new NAND controller drivers that are making use of
fields/hooks that we want to get rid of but can't because of all the
legacy drivers that we might break if we do.
So, instead of removing those fields/hooks, let's move them to a
sub-struct which is clearly documented as deprecated.
We start with the ->IO_ADDR_{R,W] fields.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Let's make the raw NAND API consistent by patching all helpers and
hooks to take a nand_chip object instead of an mtd_info one or
remove the mtd_info object when both are passed.
In order to do that, we first need to update the platform_nand_ctrl
hooks to take a nand_chip object instead of an mtd_info.
We add temporary plat_nand_xxx() wrappers to the do the mtd -> chip
conversion, but those will be dropped when patching nand_chip hooks to
take a nand_chip object.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Krzysztof Halasa <khalasa@piap.pl>
Acked-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Add the ISO7816 ioctl and associated accessors and data structure.
Drivers can then use this common implementation to handle ISO7816
(smart cards).
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
[ludovic.desroches@microchip.com: squash and rebase, removal of gpios, checkpatch fixes]
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is nothing arch specific about building dtb files other than their
location under /arch/*/boot/dts/. Keeping each arch aligned is a pain.
The dependencies and supported targets are all slightly different.
Also, a cross-compiler for each arch is needed, but really the host
compiler preprocessor is perfectly fine for building dtbs. Move the
build rules to a common location and remove the arch specific ones. This
is done in a single step to avoid warnings about overriding rules.
The build dependencies had been a mixture of 'scripts' and/or 'prepare'.
These pull in several dependencies some of which need a target compiler
(specifically devicetable-offsets.h) and aren't needed to build dtbs.
All that is really needed is dtc, so adjust the dependencies to only be
dtc.
This change enables support 'dtbs_install' on some arches which were
missing the target.
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Paul Burton <paul.burton@mips.com>
Acked-by: Ley Foon Tan <ley.foon.tan@intel.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: linux-kbuild@vger.kernel.org
Cc: linux-snps-arc@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: uclinux-h8-devel@lists.sourceforge.jp
Cc: linux-mips@linux-mips.org
Cc: nios2-dev@lists.rocketboards.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-xtensa@linux-xtensa.org
Signed-off-by: Rob Herring <robh@kernel.org>
Commit 8ce355cf2e ("MIPS: Setup boot_command_line before
plat_mem_setup") fixed a problem for systems which have
CONFIG_CMDLINE_BOOL=y & use a DT with a chosen node that has either no
bootargs property or an empty one. In this configuration
early_init_dt_scan_chosen() copies CONFIG_CMDLINE into
boot_command_line, but the MIPS code doesn't know this so it appends
CONFIG_CMDLINE (via builtin_cmdline) to boot_command_line again. The
result is that boot_command_line contains the arguments from
CONFIG_CMDLINE twice.
That commit took the approach of simply setting up boot_command_line
from the MIPS code before early_init_dt_scan_chosen() runs, causing it
not to copy CONFIG_CMDLINE to boot_command_line if a chosen node with no
bootargs property is found.
Unfortunately this is problematic for systems which do have a non-empty
bootargs property & CONFIG_CMDLINE_BOOL=y. There
early_init_dt_scan_chosen() will overwrite boot_command_line with the
arguments from DT, which means we lose those from CONFIG_CMDLINE
entirely. This breaks CONFIG_MIPS_CMDLINE_DTB_EXTEND. If we have
CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER or
CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND selected and the DT has a bootargs
property which we should ignore, it will instead be honoured breaking
those configurations too.
Fix this by reverting commit 8ce355cf2e ("MIPS: Setup
boot_command_line before plat_mem_setup") to restore the former
behaviour, and fixing the CONFIG_CMDLINE duplication issue by
initializing boot_command_line to a non-empty string that
early_init_dt_scan_chosen() will not overwrite with CONFIG_CMDLINE.
This is a little ugly, but cleanup in this area is on its way. In the
meantime this is at least easy to backport & contains the ugliness
within arch/mips/.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: 8ce355cf2e ("MIPS: Setup boot_command_line before plat_mem_setup")
References: https://patchwork.linux-mips.org/patch/18804/
Patchwork: https://patchwork.linux-mips.org/patch/20813/
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Jaedon Shin <jaedon.shin@gmail.com>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # v4.16+
When using the legacy mmap layout, for example triggered using ulimit -s
unlimited, get_unmapped_area() fills memory from bottom to top starting
from a fairly low address near TASK_UNMAPPED_BASE.
This placement is suboptimal if the user application wishes to allocate
large amounts of heap memory using the brk syscall. With the VDSO being
located low in the user's virtual address space, the amount of space
available for access using brk is limited much more than it was prior to
the introduction of the VDSO.
For example:
# ulimit -s unlimited; cat /proc/self/maps
00400000-004ec000 r-xp 00000000 08:00 71436 /usr/bin/coreutils
004fc000-004fd000 rwxp 000ec000 08:00 71436 /usr/bin/coreutils
004fd000-0050f000 rwxp 00000000 00:00 0
00cc3000-00ce4000 rwxp 00000000 00:00 0 [heap]
2ab96000-2ab98000 r--p 00000000 00:00 0 [vvar]
2ab98000-2ab99000 r-xp 00000000 00:00 0 [vdso]
2ab99000-2ab9d000 rwxp 00000000 00:00 0
...
Resolve this by adjusting STACK_TOP to reserve space for the VDSO &
providing an address hint to get_unmapped_area() causing it to use this
space even when using the legacy mmap layout.
We reserve enough space for the VDSO, plus 1MB or 256MB for 32 bit & 64
bit systems respectively within which we randomize the VDSO base
address. Previously this randomization was taken care of by the mmap
base address randomization performed by arch_mmap_rnd(). The 1MB & 256MB
sizes are somewhat arbitrary but chosen such that we have some
randomization without taking up too much of the user's virtual address
space, which is often in short supply for 32 bit systems.
With this the VDSO is always mapped at a high address, leaving lots of
space for statically linked programs to make use of brk:
# ulimit -s unlimited; cat /proc/self/maps
00400000-004ec000 r-xp 00000000 08:00 71436 /usr/bin/coreutils
004fc000-004fd000 rwxp 000ec000 08:00 71436 /usr/bin/coreutils
004fd000-0050f000 rwxp 00000000 00:00 0
00c28000-00c49000 rwxp 00000000 00:00 0 [heap]
...
7f67c000-7f69d000 rwxp 00000000 00:00 0 [stack]
7f7fc000-7f7fd000 rwxp 00000000 00:00 0
7fcf1000-7fcf3000 r--p 00000000 00:00 0 [vvar]
7fcf3000-7fcf4000 r-xp 00000000 00:00 0 [vdso]
Signed-off-by: Paul Burton <paul.burton@mips.com>
Reported-by: Huacai Chen <chenhc@lemote.com>
Fixes: ebb5e78cc6 ("MIPS: Initial implementation of a VDSO")
Cc: Huacai Chen <chenhc@lemote.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # v4.4+
gcc 3.3 has been retired for a while, use PTRS_PER_PGD and remove the
asm-offsets.h inclusion.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20814/
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
The crash utility initializes cpu state by reading the system kernel
memory, which is copied into vmcore.
It is also natural to preserve the online state for CPUs at crash.
Failing to do so could make the analysis tool present info for only 1 CPU
by default, and unable to find panic task.
Signed-off-by: Dengcheng Zhu <dzhu@wavecomp.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20809/
Cc: Paul Burton <pburton@wavecomp.com>
Cc: "ralf@linux-mips.org" <ralf@linux-mips.org>
Cc: "linux-mips@linux-mips.org" <linux-mips@linux-mips.org>
Cc: "rachel.mozes@intel.com" <rachel.mozes@intel.com>
In much the same vein as commit ac41f9c462 ("MIPS: Remove a temporary
hack for debugging cache flushes in SMTC configuration") and commit
eb75ecb113 ("MIPS: MT: Remove unused MT single-threaded cache flush
code"), remove the long obsolete ndflush & niflush command line
arguments which provided a hack that should not be useful outside of
debug sessions performed long ago.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Commit ac41f9c462 ("MIPS: Remove a temporary hack for debugging cache
flushes in SMTC configuration") removed an ugly hack that allowed cache
flushing to be performed single-threaded, something which should not be
necessary outside of debug sessions performed long ago.
Whilst the hack was removed from the cache flush code itself, the
mt_protdflush & mt_protiflush variables were left behind along with code
providing the protdflush & protiflush command line arguments. The
mt_cflush_lockdown() & mt_cflush_release() functions were also left
behind but are now entirely unused.
Remove all the unused code to complete the removal of the MT ASE
single-threaded cache flush hack.
Signed-off-by: Paul Burton <paul.burton@mips.com>
MIPSR6 CPUs do not support unaligned load/store instructions
(LWL, LWR, SWL, SWR and LDL, LDR, SDL, SDR for 64bit).
Currently the MIPS tree has some special cases to avoid these
instructions, and the code is testing for !CONFIG_CPU_MIPSR6.
This patch declares a new Kconfig variable:
CONFIG_CPU_HAS_LOAD_STORE_LR.
This variable indicates that the CPU supports these instructions.
Then, the patch does the following:
- Carefully selects this option on all CPUs except MIPSR6.
- Switches all the special cases to test for the new variable,
and inverts the logic:
'#ifndef CONFIG_CPU_MIPSR6' turns into
'#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR'
and vice-versa.
Also, when this variable is NOT selected (e.g. MIPSR6),
CONFIG_GENERIC_CSUM will default to 'y', to compile generic
C checksum code (instead of special assembly code that uses the
unsupported instructions).
This commit should not affect any existing CPU, and is required
for future Lexra CPU support, that misses these instructions too.
Signed-off-by: Yasha Cherikovsky <yasha.che3@gmail.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20808/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
The ELF appended dtb can be accessed now via 'fw_passed_dtb'.
Since raw appended dtb is accessed via that variable too,
this now effectively allows to boot with CONFIG_MIPS_RAW_APPENDED_DTB=y
on Octeon.
Signed-off-by: Yasha Cherikovsky <yasha.che3@gmail.com>
[paul.burton@mips.com: Fix trivial __dtb_octeon_*_begin conflict]
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20805/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Since commit 15f37e1588 ("MIPS: store the appended
dtb address in a variable"),
in kernels with MIPS_RAW_APPENDED_DTB=y, the early boot code detects
the dtb and stores it in the 'fw_passed_dtb' variable.
However, the dtb is not stored in 'fw_passed_dtb' in kernels with
MIPS_ELF_APPENDED_DTB=y.
Under MIPS_ELF_APPENDED_DTB=y, the dtb is also located in the
__appended_dtb section, so we just need to update the #ifdef.
This will allow to access the dtb in a more uniform way.
Fixes: 15f37e1588 ("MIPS: store the appended dtb address in a variable")
Signed-off-by: Yasha Cherikovsky <yasha.che3@gmail.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20803/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
It makes the code more readable, especially in the nested ifdefs.
Signed-off-by: Yasha Cherikovsky <yasha.che3@gmail.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20802/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Out-of-tree platforms may not be based on Generic as shown in customer
communication. Share the prepare method with all using UHI boot protocol,
and put into machine_kexec.c.
The benefit is that, when having kexec_args related problems, developers
will naturally look into machine_kexec.c, where "CONFIG_UHI_BOOT" will be
found, prompting them to add "select UHI_BOOT" to the platform Kconfig. It
would otherwise require a lot debugging or online searching to be aware
that the solution is in Generic code.
Tested-by: Rachel Mozes <rachel.mozes@intel.com>
Reported-by: Rachel Mozes <rachel.mozes@intel.com>
Signed-off-by: Dengcheng Zhu <dzhu@wavecomp.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20569/
Cc: pburton@wavecomp.com
Cc: ralf@linux-mips.org
Cc: linux-mips@linux-mips.org
We can rely on the system kernel and the dump capture kernel themselves in
memory usage.
Being restrictive with 512MB limit may cause kexec tool failure on some
platforms.
Tested-by: Rachel Mozes <rachel.mozes@intel.com>
Reported-by: Rachel Mozes <rachel.mozes@intel.com>
Signed-off-by: Dengcheng Zhu <dzhu@wavecomp.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20568/
Cc: pburton@wavecomp.com
Cc: ralf@linux-mips.org
Cc: linux-mips@linux-mips.org
The existing implementation lets machine_kexec() CPU jump to reboot code
buffer, whereas other CPUs to relocated_kexec_smp_wait. The natural way to
bring up an SMP new kernel would be to let CPU0 do it while others being
halted. For those failing to do so, fall back to the jumping method.
Signed-off-by: Dengcheng Zhu <dzhu@wavecomp.com>
[paul.burton@mips.com: Guard kexec_nonboot_cpu_jump with CONFIG_SMP]
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20570/
Cc: pburton@wavecomp.com
Cc: ralf@linux-mips.org
Cc: linux-mips@linux-mips.org
Cc: rachel.mozes@intel.com
The only functional differences (modulo a few missing fixes in the arch
code) is that architectures without coherent caches need a hook to
convert a virtual or dma address into a pfn, given that we don't have
the kernel linear mapping available for the otherwise easy virt_to_page
call. As a side effect we can support mmap of the per-device coherent
area even on architectures not providing the callback, and we make
previous dangerous default methods dma_common_mmap actually save for
non-coherent architectures by rejecting it without the right helper.
In addition to that we need a hook so that some architectures can
override the protection bits when mmaping a dma coherent allocations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Paul Burton <paul.burton@mips.com> # MIPS parts
All the cache maintainance is already stubbed out when not enabled,
but merging the two allows us to nicely handle the case where
cache maintainance is required for some devices, but not others.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Paul Burton <paul.burton@mips.com> # MIPS parts
Various architectures support both coherent and non-coherent dma on a
per-device basis. Move the dma_noncoherent flag from the mips archdata
field to struct device proper to prepare the infrastructure for reuse on
other architectures.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Paul Burton <paul.burton@mips.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While both option select a form of conditional dma coherence they don't
actually share any code in the implementation, so untangle them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Paul Burton <paul.burton@mips.com>
Original Loongson-3 pci_ops can only access standard pci config space,
this patch let it be able to access extended pci config space.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
[paul.burton@mips.com: Tweaks to fix checkpatch warnings, reverse xmas tree]
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20707/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: Huacai Chen <chenhuacai@gmail.com>
New Loongson-3 (Loongson-3A R2, Loongson-3A R3, and newer) has SFB
(Store Fill Buffer) which can improve the performance of memory access.
Now, SFB enablement is controlled by CONFIG_LOONGSON3_ENHANCEMENT, and
the generic kernel has no benefit from SFB (even it is running on a new
Loongson-3 machine). With this patch, we can enable SFB at runtime by
detecting the CPU type (the expense is war_io_reorder_wmb() will always
be a 'sync', which will hurt the performance of old Loongson-3).
[paul.burton@mips.com: Further info from Huacai:
In practise, I found that sometimes there are boot failures if I
enable SFB/LPA in cpu_probe(). I don't know why because processor
designers also haven't give me an explaination, but I think this may
have some relationships to speculative execution.]
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20426/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: Huacai Chen <chenhuacai@gmail.com>
Call pcie_bus_configure_settings() on MIPS, like for other platforms.
The function pcie_bus_configure_settings() makes sure the MPS (Max
Payload Size) across the bus is uniform and provides the ability to
tune the MRSS (Max Read Request Size) and MPS (Max Payload Size) to
higher performance values. Some devices will not operate properly if
these aren't set correctly because the firmware doesn't always do it.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20649/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: Huacai Chen <chenhuacai@gmail.com>
This API is not used anywhere in the kernel and has remained
unused for years after being introduced.
Over time, we have developed a subsystem to deal with pin
control and this now managed pull up/down.
Delete the old and unused API. If this platform needs it,
we should implement a proper pin controller for it instead.
Cc: Yoichi Yuasa <yuasa@linux-mips.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
MIPS already has memblock support and all the memory is already registered
with it.
This patch replaces bootmem memory reservations with memblock ones and
removes the bootmem initialization.
Since memblock allocates memory in top-down mode, we ensure that memblock
limit is max_low_pfn to prevent allocations from the high memory.
To have the exceptions base in the lower 512M of the physical memory, its
allocation in arch/mips/kernel/traps.c::traps_init() is using bottom-up
mode.
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20560/
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-mm@kvack.org
Cc: linux-kernel@vger.kernel.org
This adds the DSA driver for the GSWIP Switch found in the VRX200 SoC.
This switch is integrated in the DSL SoC, this SoC uses a GSWIP version
2.1, there are other SoCs using different versions of this IP block, but
this driver was only tested with the version found in the VRX200.
Currently only the basic features are implemented which will forward all
packages to the CPU and let the CPU do the forwarding. The hardware also
support Layer 2 offloading which is not yet implemented in this driver.
The GPHY FW loaded is now done by this driver and not any more by the
separate driver in drivers/soc/lantiq/gphy.c, I will remove this driver
is a separate patch. to make use of the GPHY this switch driver is
needed anyway. Other SoCs have more embedded GPHYs so this driver should
support a variable number of GPHYs. After the firmware was loaded the
GPHY can be probed on the MDIO bus and it behaves like an external GPHY,
without the firmware it can not be probed on the MDIO bus.
The clock names in the sysctrl.c file have to be changed because the
clocks are now used by a different driver. This should be cleaned up and
a real common clock driver should provide the clocks instead.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
This drives the PMAC between the GSWIP Switch and the CPU in the VRX200
SoC. This is currently only the very basic version of the Ethernet
driver.
When the DMA channel is activated we receive some packets which were
send to the SoC while it was still in U-Boot, these packets have the
wrong header. Resetting the IP cores did not work so we read out the
extra packets at the beginning and discard them.
This also adapts the clock code in sysctrl.c to use the default name of
the device node so that the driver gets the correct clock. sysctrl.c
should be replaced with a proper common clock driver later.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a DMA channel is opened the IRQ should not get activated
automatically, this allows it to pull data out manually without the help
of interrupts. This is needed for a workaround in the vrx200 Ethernet
driver.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Fix up several Kconfig dependencies in netfilter, from Martin Willi
and Florian Westphal.
2) Memory leak in be2net driver, from Petr Oros.
3) Memory leak in E-Switch handling of mlx5 driver, from Raed Salem.
4) mlx5_attach_interface needs to check for errors, from Huy Nguyen.
5) tipc_release() needs to orphan the sock, from Cong Wang.
6) Need to program TxConfig register after TX/RX is enabled in r8169
driver, not beforehand, from Maciej S. Szmigiero.
7) Handle 64K PAGE_SIZE properly in ena driver, from Netanel Belgazal.
8) Fix crash regression in ip_do_fragment(), from Taehee Yoo.
9) syzbot can create conditions where kernel log is flooded with
synflood warnings due to creation of many listening sockets, fix
that. From Willem de Bruijn.
10) Fix RCU issues in rds socket layer, from Cong Wang.
11) Fix vlan matching in nfp driver, from Pieter Jansen van Vuuren.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (59 commits)
nfp: flower: reject tunnel encap with ipv6 outer headers for offloading
nfp: flower: fix vlan match by checking both vlan id and vlan pcp
tipc: check return value of __tipc_dump_start()
s390/qeth: don't dump past end of unknown HW header
s390/qeth: use vzalloc for QUERY OAT buffer
s390/qeth: switch on SG by default for IQD devices
s390/qeth: indicate error when netdev allocation fails
rds: fix two RCU related problems
r8169: Clear RTL_FLAG_TASK_*_PENDING when clearing RTL_FLAG_TASK_ENABLED
erspan: fix error handling for erspan tunnel
erspan: return PACKET_REJECT when the appropriate tunnel is not found
tcp: rate limit synflood warnings further
MIPS: lantiq: dma: add dev pointer
netfilter: xt_hashlimit: use s->file instead of s->private
netfilter: nfnetlink_queue: Solve the NFQUEUE/conntrack clash for NF_REPEAT
netfilter: cttimeout: ctnl_timeout_find_get() returns incorrect pointer to type
netfilter: conntrack: timeout interface depend on CONFIG_NF_CONNTRACK_TIMEOUT
netfilter: conntrack: reset tcp maxwin on re-register
qmi_wwan: Support dynamic config on Quectel EP06
ethernet: renesas: convert to SPDX identifiers
...
dma_zalloc_coherent() now crashes if no dev pointer is given.
Add a dev pointer to the ltq_dma_channel structure and fill it in the
driver using it.
This fixes a bug introduced in kernel 4.19.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the devicetree nodes for the DMA core of the JZ4740 SoC, disabled
by default, as currently there are no clients for the DMA driver
(until the MMC driver and/or others get a devicetree node).
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
Acked-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add the two devicetree nodes for the two DMA cores of the JZ4770 SoC,
disabled by default, as currently there are no clients for the DMA
driver (until the MMC driver and/or others get a devicetree node).
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
Acked-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The driver now accepts two memory resources, the first one for the
channel-specific registers, the second one for the controller-specific
registers.
Note that older devicetrees, without this commit, will still work with
the jz4780-dma driver.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
ARM:
- Fix a VFP corruption in 32-bit guest
- Add missing cache invalidation for CoW pages
- Two small cleanups
s390:
- Fallout from the hugetlbfs support: pfmf interpretion and locking
- VSIE: fix keywrapping for nested guests
PPC:
- Fix a bug where pages might not get marked dirty, causing
guest memory corruption on migration,
- Fix a bug causing reads from guest memory to use the wrong guest
real address for very large HPT guests (>256G of memory), leading to
failures in instruction emulation.
x86:
- Fix out of bound access from malicious pv ipi hypercalls (introduced
in rc1)
- Fix delivery of pending interrupts when entering a nested guest,
preventing arbitrarily late injection
- Sanitize kvm_stat output after destroying a guest
- Fix infinite loop when emulating a nested guest page fault
and improve the surrounding emulation code
- Two minor cleanups
-----BEGIN PGP SIGNATURE-----
iQEcBAABCAAGBQJbk5gAAAoJEED/6hsPKofoS0UH/1clCzg/8x3jhpDcKKp6tDm7
9XHOOQ6XmydT0HXYJNqZepGNqU99ip+2u4x8E9LCT5MTvTMZ1BcNM6PmenjJVULY
GMJtwZhjqoklrOcNkXGqIye4Ec+I0pBuMmt0AN0N85CcHO8VUBpMzsdxgJLuxcRm
UT6OZnCLyJsock6BqkZmqVsJj/gemFnI9MpudnrU8cCFk60roXmQWJ66fMIFfKjt
q0R61t8nmbapQKE8pjqBNgbCsuotVOtU1zgMkeM5LkaYEfc65ZPdgt3sdpyG8Guq
WA7Vt6HEvmNrcQxHFX5P0GxTVM9lOVCUx1bKXE4+57CMZOYl/8hDaTudlcacutg=
=FyuN
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Radim Krčmář:
"ARM:
- Fix a VFP corruption in 32-bit guest
- Add missing cache invalidation for CoW pages
- Two small cleanups
s390:
- Fallout from the hugetlbfs support: pfmf interpretion and locking
- VSIE: fix keywrapping for nested guests
PPC:
- Fix a bug where pages might not get marked dirty, causing guest
memory corruption on migration
- Fix a bug causing reads from guest memory to use the wrong guest
real address for very large HPT guests (>256G of memory), leading
to failures in instruction emulation.
x86:
- Fix out of bound access from malicious pv ipi hypercalls
(introduced in rc1)
- Fix delivery of pending interrupts when entering a nested guest,
preventing arbitrarily late injection
- Sanitize kvm_stat output after destroying a guest
- Fix infinite loop when emulating a nested guest page fault and
improve the surrounding emulation code
- Two minor cleanups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits)
KVM: LAPIC: Fix pv ipis out-of-bounds access
KVM: nVMX: Fix loss of pending IRQ/NMI before entering L2
arm64: KVM: Remove pgd_lock
KVM: Remove obsolete kvm_unmap_hva notifier backend
arm64: KVM: Only force FPEXC32_EL2.EN if trapping FPSIMD
KVM: arm/arm64: Clean dcache to PoC when changing PTE due to CoW
KVM: s390: Properly lock mm context allow_gmap_hpage_1m setting
KVM: s390: vsie: copy wrapping keys to right place
KVM: s390: Fix pfmf and conditional skey emulation
tools/kvm_stat: re-animate display of dead guests
tools/kvm_stat: indicate dead guests as such
tools/kvm_stat: handle guest removals more gracefully
tools/kvm_stat: don't reset stats when setting PID filter for debugfs
tools/kvm_stat: fix updates for dead guests
tools/kvm_stat: fix handling of invalid paths in debugfs provider
tools/kvm_stat: fix python3 issues
KVM: x86: Unexport x86_emulate_instruction()
KVM: x86: Rename emulate_instruction() to kvm_emulate_instruction()
KVM: x86: Do not re-{try,execute} after failed emulation in L2
KVM: x86: Default to not allowing emulation retry in kvm_mmu_page_fault
...
The old rtc driver is getting in the way of some compat_ioctl
simplification. Looking up the loongson64 git history, it seems
that everyone uses the more modern but compatible RTC_CMOS driver
anyway, so let's remove the special case for loongson64.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
kvm_unmap_hva is long gone, and we only have kvm_unmap_hva_range to
deal with. Drop the now obsolete code.
Fixes: fb1522e099 ("KVM: update to new mmu_notifier semantic v2")
Cc: James Hogan <jhogan@kernel.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Set the PCI controller of_node such that PCI devices can be
instantiated via device tree.
Signed-off-by: Tobias Wolf <dev-NTEO@vplace.de>
Signed-off-by: Mathias Kresin <dev@kresin.me>
Acked-by: John Crispin <john@phrozen.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20423/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Enable the i2c controller on ocelot PCB123. While there are no i2c devices
on the board itself, it can be used to control the SFP transceivers.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20352/
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-i2c@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Allan Nielsen <allan.nielsen@microchip.com>
Ocelot has an i2c controller, add it. There is only one possible pinmux
configuration so add it as well.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20353/
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-i2c@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Allan Nielsen <allan.nielsen@microchip.com>
The comment describing arch_mem_init() was separated from the definition
of arch_mem_init() by commit a09fc446fb ("[MIPS] setup.c: use
early_param() for early command line parsing"). Move the comment such
that it's next to the definition again for ease of reading.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Clean up instances of casts to the type that a value already has, since
they are effectively no-ops and only serve to complicate the code.
This is the result of the following semantic patch:
@identitycast@
type T;
T *A;
@@
- (T *)(A)
+ A
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19599/
When a system suffers from dcache aliasing a user program may observe
stale VDSO data from an aliased cache line. Notably this can break the
expectation that clock_gettime(CLOCK_MONOTONIC, ...) is, as its name
suggests, monotonic.
In order to ensure that users observe updates to the VDSO data page as
intended, align the user mappings of the VDSO data page such that their
cache colouring matches that of the virtual address range which the
kernel will use to update the data page - typically its unmapped address
within kseg0.
This ensures that we don't introduce aliasing cache lines for the VDSO
data page, and therefore that userland will observe updates without
requiring cache invalidation.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Reported-by: Hauke Mehrtens <hauke@hauke-m.de>
Reported-by: Rene Nielsen <rene.nielsen@microsemi.com>
Reported-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Fixes: ebb5e78cc6 ("MIPS: Initial implementation of a VDSO")
Patchwork: https://patchwork.linux-mips.org/patch/20344/
Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Tested-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # v4.4+
The rt3352 has a pin that can be used as second spi chip select,
watchdog reset or GPIO. The pinmux setup was missing the definition of
said pin.
The pin is configured via the same bit on rt5350, so reuse the existing
macro.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20301/
Cc: John Crispin <john@phrozen.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
arch/mips appears to have inherited SLOW_DOWN_IO from arch/x86 in
antiquity, but we never define CONF_SLOWDOWN_IO so this is unused code.
Perhaps it was once useful to keep the MIPS header close to the x86
version to ease comparisons or porting changes, but they've diverged
significantly at this point & x86 does this differently now anyway.
Delete the dead code.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20343/
Cc: linux-mips@linux-mips.org
MIPS has a copy of lib/iomap.c with minor alterations, none of which are
necessary given appropriate definitions of PIO_OFFSET, PIO_MASK &
PIO_RESERVED. Provide such definitions, select GENERIC_IOMAP & remove
arch/mips/lib/iomap.c to cut back on the needless duplication.
The one change this does make is to our mmio_{in,out}s[bwl] functions,
which began to deviate from their generic counterparts with commit
0845bb721e ("MIPS: iomap: Use __mem_{read,write}{b,w,l} for MMIO"). I
suspect that this commit was incorrect, and that the SEAD-3 platform
should have instead selected CONFIG_SWAP_IO_SPACE. Since the SEAD-3
platform code is now gone & the board is instead supported by the
generic platform (CONFIG_MIPS_GENERIC) which selects
CONFIG_SWAP_IO_SPACE anyway, this shouldn't be a problem any more.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20342/
Cc: linux-mips@linux-mips.org
For a long time arch/mips/Makefile used nm to discover the kernel entry
point by looking for the address of the kernel_entry symbol. This
doesn't work for systems which make use of bit 0 of the PC to reflect
the ISA mode - ie. microMIPS (and MIPS16, but we don't support building
kernels that target MIPS16 anyway).
So for a while with commit 5fc9484f5e ("MIPS: Set ISA bit in entry-y
for microMIPS kernels") we manually modified the last nibble of the
output from nm, which worked but wasn't particularly pretty.
Commit 27c524d174 ("MIPS: Use the entry point from the ELF file
header") then cleaned this up by using objdump to print the ELF entry
point which includes the ISA bit, rather than using nm to print the
address of the kernel_entry symbol which doesn't. That removed the ugly
replacement of the last nibble, but added its own ugliness by needing to
manually sign extend in the 32 bit case.
Unfortunately it has been pointed out that objdump's output is
localised, and therefore grepping for its "start address" output doesn't
work when the user's language settings are such that objdump doesn't
print in English.
We could simply revert commit 27c524d174 ("MIPS: Use the entry point
from the ELF file header") and return to the manual replacement of the
last nibble of entry-y, but it seems that was found sufficiently
unpalatable to avoid. We could attempt to force the language used by
objdump by setting an environment variable such as LC_ALL, but that
seems fragile. Instead we add a small tool named elf-entry which simply
prints out the entry point of the kernel in the format we require.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Reported-by: Philippe Reynes <philippe.reynes@softathome.com>
Tested-by: Philippe Reynes <philippe.reynes@softathome.com>
Fixes: 27c524d174 ("MIPS: Use the entry point from the ELF file header")
Patchwork: https://patchwork.linux-mips.org/patch/20322/
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Setting GPIO 21 high seems to be required to enable power to USB ports
on the WNDR3400v3. As there is already similar code for WNR3500L,
make the existing USB power GPIO code generic and use that.
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20259/
Cc: Rafał Miłecki <zajec5@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
After changing over to 64-bit time_t syscalls, many architectures will
want compat_sys_utimensat() but not respective handlers for utime(),
utimes() and futimesat(). This adds a new __ARCH_WANT_SYS_UTIME32 to
complement __ARCH_WANT_SYS_UTIME. For now, all 64-bit architectures that
support CONFIG_COMPAT set it, but future 64-bit architectures will not
(tile would not have needed it either, but got removed).
As older 32-bit architectures get converted to using CONFIG_64BIT_TIME,
they will have to use __ARCH_WANT_SYS_UTIME32 instead of
__ARCH_WANT_SYS_UTIME. Architectures using the generic syscall ABI don't
need either of them as they never had a utime syscall.
Since the compat_utimbuf structure is now required outside of
CONFIG_COMPAT, I'm moving it into compat_time.h.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
changed from last version:
- renamed __ARCH_WANT_COMPAT_SYS_UTIME to __ARCH_WANT_SYS_UTIME32
The sys_llseek sytem call is needed on all 32-bit architectures and
none of the 64-bit ones, so we can remove the __ARCH_WANT_SYS_LLSEEK guard
and simplify the include/asm-generic/unistd.h header further.
Since 32-bit tasks can run either natively or in compat mode on 64-bit
architectures, we have to check for both !CONFIG_64BIT and CONFIG_COMPAT.
There are a few 64-bit architectures that also reference sys_llseek
in their 64-bit ABI (e.g. sparc), but I verified that those all
select CONFIG_COMPAT, so the #if check is still correct here. It's
a bit odd to include it in the syscall table though, as it's the
same as sys_lseek() on 64-bit, but with strange calling conventions.
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
While converting compat system call handlers to work on 32-bit
architectures, I found a number of types used in those handlers
that are identical between all architectures.
Let's move all the identical ones into asm-generic/compat.h to avoid
having to add even more identical definitions of those types.
For unknown reasons, mips defines __compat_gid32_t, __compat_uid32_t
and compat_caddr_t as signed, while all others have them unsigned.
This seems to be a mistake, but I'm leaving it alone here. The other
types all differ by size or alignment on at least on architecture.
compat_aio_context_t is currently defined in linux/compat.h but
also needed for compat_sys_io_getevents(), so let's move it into
the same place.
While we still have not decided whether the 32-bit time handling
will always use the compat syscalls, or in which form, I think this
is a useful cleanup that we can merge regardless.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
We have four generations of stat() syscalls:
- the oldstat syscalls that are only used on the older architectures
- the newstat family that is used on all 64-bit architectures but
lacked support for large files on 32-bit architectures.
- the stat64 family that is used mostly on 32-bit architectures to
replace newstat
- statx() to replace all of the above, adding 64-bit timestamps among
other things.
We already compile stat64 only on those architectures that need it,
but newstat is always built, including on those that don't reference
it. This adds a new __ARCH_WANT_NEW_STAT symbol along the lines of
__ARCH_WANT_OLD_STAT and __ARCH_WANT_STAT64 to control compilation of
newstat. All architectures that need it use an explict define, the
others now get a little bit smaller, and future architecture (including
64-bit targets) won't ever see it.
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20315/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Split the common dma.c which shared by Loongson-2E and Loongson-2F,
since the code in 'common' directory is assumed be shared by all 64bit
Loongson platforms (but Loongson-3 doesn't use it now). By the way,
Loongson-2E and Loongson-2F have already dropped 32bit kernel support,
so CONFIG_64BIT isn't needed.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20302/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: Huacai Chen <chenhuacai@gmail.com>
Christoph Hellwig suggested a slightly different path for handling
backwards compatibility with the 32-bit time_t based system calls:
Rather than simply reusing the compat_sys_* entry points on 32-bit
architectures unchanged, we get rid of those entry points and the
compat_time types by renaming them to something that makes more sense
on 32-bit architectures (which don't have a compat mode otherwise),
and then share the entry points under the new name with the 64-bit
architectures that use them for implementing the compatibility.
The following types and interfaces are renamed here, and moved
from linux/compat_time.h to linux/time32.h:
old new
--- ---
compat_time_t old_time32_t
struct compat_timeval struct old_timeval32
struct compat_timespec struct old_timespec32
struct compat_itimerspec struct old_itimerspec32
ns_to_compat_timeval() ns_to_old_timeval32()
get_compat_itimerspec64() get_old_itimerspec32()
put_compat_itimerspec64() put_old_itimerspec32()
compat_get_timespec64() get_old_timespec32()
compat_put_timespec64() put_old_timespec32()
As we already have aliases in place, this patch addresses only the
instances that are relevant to the system call interface in particular,
not those that occur in device drivers and other modules. Those
will get handled separately, while providing the 64-bit version
of the respective interfaces.
I'm not renaming the timex, rusage and itimerval structures, as we are
still debating what the new interface will look like, and whether we
will need a replacement at all.
This also doesn't change the names of the syscall entry points, which can
be done more easily when we actually switch over the 32-bit architectures
to use them, at that point we need to change COMPAT_SYSCALL_DEFINEx to
SYSCALL_DEFINEx with a new name, e.g. with a _time32 suffix.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Link: https://lore.kernel.org/lkml/20180705222110.GA5698@infradead.org/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- add build_{menu,n,g,x}config targets for compile-testing Kconfig
- fix and improve recursive dependency detection in Kconfig
- fix parallel building of menuconfig/nconfig
- fix syntax error in clang-version.sh
- suppress distracting log from syncconfig
- remove obsolete "rpm" target
- remove VMLINUX_SYMBOL(_STR) macro entirely
- fix microblaze build with CONFIG_DYNAMIC_FTRACE
- move compiler test for dead code/data elimination to Kconfig
- rename well-known LDFLAGS variable to KBUILD_LDFLAGS
- misc fixes and cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Vsb2
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- add build_{menu,n,g,x}config targets for compile-testing Kconfig
- fix and improve recursive dependency detection in Kconfig
- fix parallel building of menuconfig/nconfig
- fix syntax error in clang-version.sh
- suppress distracting log from syncconfig
- remove obsolete "rpm" target
- remove VMLINUX_SYMBOL(_STR) macro entirely
- fix microblaze build with CONFIG_DYNAMIC_FTRACE
- move compiler test for dead code/data elimination to Kconfig
- rename well-known LDFLAGS variable to KBUILD_LDFLAGS
- misc fixes and cleanups
* tag 'kbuild-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: rename LDFLAGS to KBUILD_LDFLAGS
kbuild: pass LDFLAGS to recordmcount.pl
kbuild: test dead code/data elimination support in Kconfig
initramfs: move gen_initramfs_list.sh from scripts/ to usr/
vmlinux.lds.h: remove stale <linux/export.h> include
export.h: remove VMLINUX_SYMBOL() and VMLINUX_SYMBOL_STR()
Coccinelle: remove pci_alloc_consistent semantic to detect in zalloc-simple.cocci
kbuild: make sorting initramfs contents independent of locale
kbuild: remove "rpm" target, which is alias of "rpm-pkg"
kbuild: Fix LOADLIBES rename in Documentation/kbuild/makefiles.txt
kconfig: suppress "configuration written to .config" for syncconfig
kconfig: fix "Can't open ..." in parallel build
kbuild: Add a space after `!` to prevent parsing as file pattern
scripts: modpost: check memory allocation results
kconfig: improve the recursive dependency report
kconfig: report recursive dependency involving 'imply'
kconfig: error out when seeing recursive dependency
kconfig: add build-only configurator targets
scripts/dtc: consolidate include path options in Makefile
Commit a0f97e06a4 ("kbuild: enable 'make CFLAGS=...' to add
additional options to CC") renamed CFLAGS to KBUILD_CFLAGS.
Commit 222d394d30 ("kbuild: enable 'make AFLAGS=...' to add
additional options to AS") renamed AFLAGS to KBUILD_AFLAGS.
Commit 06c5040cdb ("kbuild: enable 'make CPPFLAGS=...' to add
additional options to CPP") renamed CPPFLAGS to KBUILD_CPPFLAGS.
For some reason, LDFLAGS was not renamed.
Using a well-known variable like LDFLAGS may result in accidental
override of the variable.
Kbuild generally uses KBUILD_ prefixed variables for the internally
appended options, so here is one more conversion to sanitize the
naming convention.
I did not touch Makefiles under tools/ since the tools build system
is a different world.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
- Fix microMIPS build failures by adding a .insn directive to the
barrier_before_unreachable() asm statement in order to convince the
toolchain that the asm statement is a valid branch target rather
than a bogus attempt to switch ISA.
- Clean up our declarations of TLB functions that we overwrite with
generated code in order to prevent the compiler making assumptions
about alignment that cause microMIPS kernels built with GCC 7 &
above to die early during boot.
- Fix up a regression for MIPS32 kernels which slipped into the main
MIPS pull for 4.19, causing CONFIG_32BIT=y kernels to contain
inappropriate MIPS64 instructions.
- Extend our existing workaround for MIPSr6 builds that end up using
the __multi3 intrinsic to GCC 7 & below, rather than just GCC 7.
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQRgLjeFAZEXQzy86/s+p5+stXUA3QUCW37wVhUccGF1bC5idXJ0
b25AbWlwcy5jb20ACgkQPqefrLV1AN18iAD/ZO02rgkTgMG7NvZMtbOwflxe1aVz
YpAQzcOSz+CBxgUA/30ZwZm37hgMi3YWOJMSfmbuWKsYi+/vkcjwlfai7UUF
=oJFy
-----END PGP SIGNATURE-----
Merge tag 'mips_4.19_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Paul Burton:
- Fix microMIPS build failures by adding a .insn directive to the
barrier_before_unreachable() asm statement in order to convince the
toolchain that the asm statement is a valid branch target rather
than a bogus attempt to switch ISA.
- Clean up our declarations of TLB functions that we overwrite with
generated code in order to prevent the compiler making assumptions
about alignment that cause microMIPS kernels built with GCC 7 &
above to die early during boot.
- Fix up a regression for MIPS32 kernels which slipped into the main
MIPS pull for 4.19, causing CONFIG_32BIT=y kernels to contain
inappropriate MIPS64 instructions.
- Extend our existing workaround for MIPSr6 builds that end up using
the __multi3 intrinsic to GCC 7 & below, rather than just GCC 7.
* tag 'mips_4.19_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: lib: Provide MIPS64r6 __multi3() for GCC < 7
MIPS: Workaround GCC __builtin_unreachable reordering bug
compiler.h: Allow arch-specific asm/compiler.h
MIPS: Avoid move psuedo-instruction whilst using MIPS_ISA_LEVEL
MIPS: Consistently declare TLB functions
MIPS: Export tlbmiss_handler_setup_pgd near its definition
Some versions of GCC suboptimally generate calls to the __multi3()
intrinsic for MIPS64r6 builds, resulting in link failures due to the
missing function:
LD vmlinux.o
MODPOST vmlinux.o
kernel/bpf/verifier.o: In function `kmalloc_array':
include/linux/slab.h:631: undefined reference to `__multi3'
fs/select.o: In function `kmalloc_array':
include/linux/slab.h:631: undefined reference to `__multi3'
...
We already have a workaround for this in which we provide the
instrinsic, but we do so selectively for GCC 7 only. Unfortunately the
issue occurs with older GCC versions too - it has been observed with
both GCC 5.4.0 & GCC 6.4.0.
MIPSr6 support was introduced in GCC 5, so all major GCC versions prior
to GCC 8 are affected and we extend our workaround accordingly to all
MIPS64r6 builds using GCC versions older than GCC 8.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Reported-by: Vladimir Kondratiev <vladimir.kondratiev@intel.com>
Fixes: ebabcf17bc ("MIPS: Implement __multi3 for GCC7 MIPS64r6 builds")
Patchwork: https://patchwork.linux-mips.org/patch/20297/
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # 4.15+
Some versions of GCC for the MIPS architecture suffer from a bug which
can lead to instructions from beyond an unreachable statement being
incorrectly reordered into earlier branch delay slots if the unreachable
statement is the only content of a case in a switch statement. This can
lead to seemingly random behaviour, such as invalid memory accesses from
incorrectly reordered loads or stores, and link failures on microMIPS
builds.
See this potential GCC fix for details:
https://gcc.gnu.org/ml/gcc-patches/2015-09/msg00360.html
Runtime problems resulting from this bug were initially observed using a
maltasmvp_defconfig v4.4 kernel built using GCC 4.9.2 (from a Codescape
SDK 2015.06-05 toolchain), with the result being an address exception
taken after log messages about the L1 caches (during probe of the L2
cache):
Initmem setup node 0 [mem 0x0000000080000000-0x000000009fffffff]
VPE topology {2,2} total 4
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 64kB, 4-way, PIPT, no aliases, linesize 32 bytes
<AdEL exception here>
This is early enough that the kernel exception vectors are not in use,
so any further output depends upon the bootloader. This is reproducible
in QEMU where no further output occurs - ie. the system hangs here.
Given the nature of the bug it may potentially be hit with differing
symptoms. The bug is known to affect GCC versions as recent as 7.3, and
it is unclear whether GCC 8 fixed it or just happens not to encounter
the bug in the testcase found at the link above due to differing
optimizations.
This bug can be worked around by placing a volatile asm statement, which
GCC is prevented from reordering past, prior to the
__builtin_unreachable call.
That was actually done already for other reasons by commit 173a3efd3e
("bug.h: work around GCC PR82365 in BUG()"), but creates problems for
microMIPS builds due to the lack of a .insn directive. The microMIPS ISA
allows for interlinking with regular MIPS32 code by repurposing bit 0 of
the program counter as an ISA mode bit. To switch modes one changes the
value of this bit in the PC. However typical branch instructions encode
their offsets as multiples of 2-byte instruction halfwords, which means
they cannot change ISA mode - this must be done using either an indirect
branch (a jump-register in MIPS terminology) or a dedicated jalx
instruction. In order to ensure that regular branches don't attempt to
target code in a different ISA which they can't actually switch to, the
linker will check that branch targets are code in the same ISA as the
branch.
Unfortunately our empty asm volatile statements don't qualify as code,
and the link for microMIPS builds fails with errors such as:
arch/mips/mm/dma-default.s:3265: Error: branch to a symbol in another ISA mode
arch/mips/mm/dma-default.s:5027: Error: branch to a symbol in another ISA mode
Resolve this by adding a .insn directive within the asm statement which
declares that what comes next is code. This may or may not be true,
since we don't really know what comes next, but as this code is in an
unreachable path anyway that doesn't matter since we won't execute it.
We do this in asm/compiler.h & select CONFIG_HAVE_ARCH_COMPILER_H in
order to have this included by linux/compiler_types.h after
linux/compiler-gcc.h. This will result in asm/compiler.h being included
in all C compilations via the -include linux/compiler_types.h argument
in c_flags, which should be harmless.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: 173a3efd3e ("bug.h: work around GCC PR82365 in BUG()")
Patchwork: https://patchwork.linux-mips.org/patch/20270/
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-mips@linux-mips.org
- Restructure of lockdep and latency tracers
This is the biggest change. Joel Fernandes restructured the hooks
from irqs and preemption disabling and enabling. He got rid of
a lot of the preprocessor #ifdef mess that they caused.
He turned both lockdep and the latency tracers to use trace events
inserted in the preempt/irqs disabling paths. But unfortunately,
these started to cause issues in corner cases. Thus, parts of the
code was reverted back to where lockde and the latency tracers
just get called directly (without using the trace events).
But because the original change cleaned up the code very nicely
we kept that, as well as the trace events for preempt and irqs
disabling, but they are limited to not being called in NMIs.
- Have trace events use SRCU for "rcu idle" calls. This was required
for the preempt/irqs off trace events. But it also had to not
allow them to be called in NMI context. Waiting till Paul makes
an NMI safe SRCU API.
- New notrace SRCU API to allow trace events to use SRCU.
- Addition of mcount-nop option support
- SPDX headers replacing GPL templates.
- Various other fixes and clean ups.
- Some fixes are marked for stable, but were not fully tested
before the merge window opened.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCW3ruhRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qiM7AP47NhYdSnCFCRUJfrt6PovXmQtuCHt3
c3QMoGGdvzh9YAEAqcSXwh7uLhpHUp1LjMAPkXdZVwNddf4zJQ1zyxQ+EAU=
=vgEr
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- Restructure of lockdep and latency tracers
This is the biggest change. Joel Fernandes restructured the hooks
from irqs and preemption disabling and enabling. He got rid of a lot
of the preprocessor #ifdef mess that they caused.
He turned both lockdep and the latency tracers to use trace events
inserted in the preempt/irqs disabling paths. But unfortunately,
these started to cause issues in corner cases. Thus, parts of the
code was reverted back to where lockdep and the latency tracers just
get called directly (without using the trace events). But because the
original change cleaned up the code very nicely we kept that, as well
as the trace events for preempt and irqs disabling, but they are
limited to not being called in NMIs.
- Have trace events use SRCU for "rcu idle" calls. This was required
for the preempt/irqs off trace events. But it also had to not allow
them to be called in NMI context. Waiting till Paul makes an NMI safe
SRCU API.
- New notrace SRCU API to allow trace events to use SRCU.
- Addition of mcount-nop option support
- SPDX headers replacing GPL templates.
- Various other fixes and clean ups.
- Some fixes are marked for stable, but were not fully tested before
the merge window opened.
* tag 'trace-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (44 commits)
tracing: Fix SPDX format headers to use C++ style comments
tracing: Add SPDX License format tags to tracing files
tracing: Add SPDX License format to bpf_trace.c
blktrace: Add SPDX License format header
s390/ftrace: Add -mfentry and -mnop-mcount support
tracing: Add -mcount-nop option support
tracing: Avoid calling cc-option -mrecord-mcount for every Makefile
tracing: Handle CC_FLAGS_FTRACE more accurately
Uprobe: Additional argument arch_uprobe to uprobe_write_opcode()
Uprobes: Simplify uprobe_register() body
tracepoints: Free early tracepoints after RCU is initialized
uprobes: Use synchronize_rcu() not synchronize_sched()
tracing: Fix synchronizing to event changes with tracepoint_synchronize_unregister()
ftrace: Remove unused pointer ftrace_swapper_pid
tracing: More reverting of "tracing: Centralize preemptirq tracepoints and unify their usage"
tracing/irqsoff: Handle preempt_count for different configs
tracing: Partial revert of "tracing: Centralize preemptirq tracepoints and unify their usage"
tracing: irqsoff: Account for additional preempt_disable
trace: Use rcu_dereference_raw for hooks from trace-event subsystem
tracing/kprobes: Fix within_notrace_func() to check only notrace functions
...
MIPS_ISA_LEVEL is always defined as the 64 bit ISA that is a compatible
superset of the ISA that the kernel build is targeting, and is used to
allow us to emit instructions that we may detect support for at runtime.
When we use a .set MIPS_ISA_LEVEL directive & are building a 32-bit
kernel, we therefore are temporarily allowing the assembler to generate
MIPS64 instructions. Using the move pseudo-instruction whilst this is
the case is problematic because the assembler is likely to emit a daddu
instruction which will generate a reserved instruction exception when
executed on a MIPS32 machine.
Unfortunately the combination of commit a0a5ac3ce8 ("MIPS: Fix delay
slot bug in `atomic*_sub_if_positive' for R10000_LLSC_WAR") and commit
4936084c2e ("MIPS: Cleanup R10000_LLSC_WAR logic in atomic.h") causes
us to do exactly this in atomic_sub_if_positive(), and the result is
MIPS64 daddu instructions in 32-bit kernels.
Fix this by using .set mips0 to restore the default ISA after the ll
instruction, and use .set MIPS_ISA_LEVEL again prior to the sc. This
ensures everything but the ll & sc are assembled using the default ISA
for the kernel build & the move pseudo-instruction is emitted as a
MIPS32 addu instruction.
We appear to have another pre-existing instance of the same issue in our
atomic_fetch_*_relaxed() functions, and fix that up too by moving our
.set move0 such that it occurs prior to use of the move
pseudo-instruction.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: a0a5ac3ce8 ("MIPS: Fix delay slot bug in `atomic*_sub_if_positive' for R10000_LLSC_WAR")
Fixes: 4936084c2e ("MIPS: Cleanup R10000_LLSC_WAR logic in atomic.h")
Patchwork: https://patchwork.linux-mips.org/patch/20253/
Cc: James Hogan <jhogan@kernel.org>
Cc: Joshua Kinard <kumba@gentoo.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Use new return type vm_fault_t for fault handler. For now, this is just
documenting that the function returns a VM_FAULT value rather than an
errno. Once all instances are converted, vm_fault_t will become a
distinct type.
Ref-> commit 1c8f422059 ("mm: change return type to vm_fault_t")
In this patch all the caller of handle_mm_fault() are changed to return
vm_fault_t type.
Link: http://lkml.kernel.org/r/20180617084810.GA6730@jordon-HP-15-Notebook-PC
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: James Hogan <jhogan@kernel.org>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: David S. Miller <davem@davemloft.net>
Cc: Richard Weinberger <richard@nod.at>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Levin, Alexander (Sasha Levin)" <alexander.levin@verizon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull networking updates from David Miller:
"Highlights:
- Gustavo A. R. Silva keeps working on the implicit switch fallthru
changes.
- Support 802.11ax High-Efficiency wireless in cfg80211 et al, From
Luca Coelho.
- Re-enable ASPM in r8169, from Kai-Heng Feng.
- Add virtual XFRM interfaces, which avoids all of the limitations of
existing IPSEC tunnels. From Steffen Klassert.
- Convert GRO over to use a hash table, so that when we have many
flows active we don't traverse a long list during accumluation.
- Many new self tests for routing, TC, tunnels, etc. Too many
contributors to mention them all, but I'm really happy to keep
seeing this stuff.
- Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu.
- Lots of cleanups and fixes in L2TP code from Guillaume Nault.
- Add IPSEC offload support to netdevsim, from Shannon Nelson.
- Add support for slotting with non-uniform distribution to netem
packet scheduler, from Yousuk Seung.
- Add UDP GSO support to mlx5e, from Boris Pismenny.
- Support offloading of Team LAG in NFP, from John Hurley.
- Allow to configure TX queue selection based upon RX queue, from
Amritha Nambiar.
- Support ethtool ring size configuration in aquantia, from Anton
Mikaev.
- Support DSCP and flowlabel per-transport in SCTP, from Xin Long.
- Support list based batching and stack traversal of SKBs, this is
very exciting work. From Edward Cree.
- Busyloop optimizations in vhost_net, from Toshiaki Makita.
- Introduce the ETF qdisc, which allows time based transmissions. IGB
can offload this in hardware. From Vinicius Costa Gomes.
- Add parameter support to devlink, from Moshe Shemesh.
- Several multiplication and division optimizations for BPF JIT in
nfp driver, from Jiong Wang.
- Lots of prepatory work to make more of the packet scheduler layer
lockless, when possible, from Vlad Buslov.
- Add ACK filter and NAT awareness to sch_cake packet scheduler, from
Toke Høiland-Jørgensen.
- Support regions and region snapshots in devlink, from Alex Vesker.
- Allow to attach XDP programs to both HW and SW at the same time on
a given device, with initial support in nfp. From Jakub Kicinski.
- Add TLS RX offload and support in mlx5, from Ilya Lesokhin.
- Use PHYLIB in r8169 driver, from Heiner Kallweit.
- All sorts of changes to support Spectrum 2 in mlxsw driver, from
Ido Schimmel.
- PTP support in mv88e6xxx DSA driver, from Andrew Lunn.
- Make TCP_USER_TIMEOUT socket option more accurate, from Jon
Maxwell.
- Support for templates in packet scheduler classifier, from Jiri
Pirko.
- IPV6 support in RDS, from Ka-Cheong Poon.
- Native tproxy support in nf_tables, from Máté Eckl.
- Maintain IP fragment queue in an rbtree, but optimize properly for
in-order frags. From Peter Oskolkov.
- Improvde handling of ACKs on hole repairs, from Yuchung Cheng"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits)
bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT"
hv/netvsc: Fix NULL dereference at single queue mode fallback
net: filter: mark expected switch fall-through
xen-netfront: fix warn message as irq device name has '/'
cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0
net: dsa: mv88e6xxx: missing unlock on error path
rds: fix building with IPV6=m
inet/connection_sock: prefer _THIS_IP_ to current_text_addr
net: dsa: mv88e6xxx: bitwise vs logical bug
net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd()
ieee802154: hwsim: using right kind of iteration
net: hns3: Add vlan filter setting by ethtool command -K
net: hns3: Set tx ring' tc info when netdev is up
net: hns3: Remove tx ring BD len register in hns3_enet
net: hns3: Fix desc num set to default when setting channel
net: hns3: Fix for phy link issue when using marvell phy driver
net: hns3: Fix for information of phydev lost problem when down/up
net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero
net: hns3: Add support for serdes loopback selftest
bnxt_en: take coredump_record structure off stack
...
Move the source statements of arch-independent Kconfig files instead of
duplicating the includes in every arch/$(SRCARCH)/Kconfig.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=gsQJ
-----END PGP SIGNATURE-----
Merge tag 'kconfig-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kconfig consolidation from Masahiro Yamada:
"Consolidation of Kconfig files by Christoph Hellwig.
Move the source statements of arch-independent Kconfig files instead
of duplicating the includes in every arch/$(SRCARCH)/Kconfig"
* tag 'kconfig-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: add a Memory Management options" menu
kconfig: move the "Executable file formats" menu to fs/Kconfig.binfmt
kconfig: use a menu in arch/Kconfig to reduce clutter
kconfig: include kernel/Kconfig.preempt from init/Kconfig
Kconfig: consolidate the "Kernel hacking" menu
kconfig: include common Kconfig files from top-level Kconfig
kconfig: remove duplicate SWAP symbol defintions
um: create a proper drivers Kconfig
um: cleanup Kconfig files
um: stop abusing KBUILD_KCONFIG
- Support 64-bit timestamps
MTD changes:
Core changes:
- Support sub-partitions
- Clarify mtd_oob_ops documentation
- Make Kconfig formatting consistent
- Fix potential overflows in mtdchar_{write,read}()
- Fallback to ->_{read,write}() when ->_{read,write}_oob() is missing
and no OOB data were requested
- Remove VLA usage in the bch lib
Driver changes:
- Use mtd_device_register() instead of mtd_device_parse_register()
where applicable
- Use proper printk format to print physical addresses in the
solutionengine driver
- Add missing mtd_set_of_node() call in the powernv driver
- Remove unneeded variables in a few drivers
- Plug the TRX part parser to the DT partition parsers logic
- Check ioremap_cache() return code in the gpio-addr-flash driver
- Stop using VMLINUX_SYMBOL_STR() in gen_probe.c
SPI NOR changes:
Core changes:
- Apply reset hacks only when reset is explicitly marked as broken in
the DT
Driver changes:
- Minor cleanup/fixes in the m25p80 driver
- Release flash_np in the nxp-spifi driver
- Add suspend/resume hooks to the atmel-quadspi driver
- Include gpio/consumer.h instead of gpio.h in the atmel-quadspi
driver
- Use %pK instead of %p in the stm32-quadspi driver
- Improve timeout handling in the cadence-quadspi driver
- Use mtd_device_register() instead of mtd_device_parse_register()
in the intel-spi driver
NAND changes:
Core changes:
- Add the SPI-NAND framework.
- Create a helper to find the best ECC configuration.
- Create NAND controller operations.
- Allocate dynamically ONFI parameters structure.
- Add defines for ONFI version bits.
- Add manufacturer fixup for ONFI parameter page.
- Add an option to specify NAND chip as a boot device.
- Add Reed-Solomon error correction algorithm.
- Better name for the controller structure.
- Remove unused caller_is_module() definition.
- Make subop helpers return unsigned values.
- Expose _notsupp() helpers for raw page accessors.
- Add default values for dynamic timings.
- Kill the chip->scan_bbt() hook.
- Rename nand_default_bbt() into nand_create_bbt().
- Start to clean the nand_chip structure.
- Remove stale prototype from rawnand.h.
Raw NAND controllers drivers changes:
- Qcom: structuring cleanup.
- Denali: use core helper to find the best ECC configuration.
- Possible build of almost all drivers by adding a dependency on
COMPILE_TEST for almost all of them in Kconfig, implies various
fixes, Kconfig cleanup, GPIO headers inclusion cleanup, and even
changes in sparc64 and ia64 architectures.
- Clean the ->probe() functions error path of a lot of drivers.
- Migrate all drivers to use nand_scan() instead of
nand_scan_ident()/nand_scan_tail() pair.
- Use mtd_device_register() where applicable to simplify the code.
- Marvell:
* Handle on-die ECC.
* Better clocks handling.
* Remove bogus comment.
* Add suspend and resume support.
- Tegra: add NAND controller driver.
- Atmel:
* Add module param to avoid using dma.
* Drop Wenyou Yang from MAINTAINERS.
- Denali: optimize timings handling.
- FSMC: Stop using chip->read_buf().
- FSL:
* Switch to SPDX license tag identifiers.
* Fix qualifiers in MXC init functions.
Raw NAND chip drivers changes:
- Micron:
* Add fixup for ONFI revision.
* Update ecc_stats.corrected.
* Make ECC activation stateful.
* Avoid enabling/disabling ECC when it can't be disabled.
* Get the actual number of bitflips.
* Allow forced on-die ECC.
* Support 8/512 on-die ECC.
* Fix on-die ECC detection logic.
- Hynix:
* Fix decoding the OOB size on H27UCG8T2BTR.
* Use ->exec_op() in hynix_nand_reg_write_op().
-----BEGIN PGP SIGNATURE-----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=yIkF
-----END PGP SIGNATURE-----
Merge tag 'mtd/for-4.19' of git://git.infradead.org/linux-mtd
Pull mtd updates from Boris Brezillon:
"JFFS2 changes:
- Support 64-bit timestamps
MTD core changes:
- Support sub-partitions
- Clarify mtd_oob_ops documentation
- Make Kconfig formatting consistent
- Fix potential overflows in mtdchar_{write,read}()
- Fallback to ->_{read,write}() when ->_{read,write}_oob() is missing
and no OOB data were requested
- Remove VLA usage in the bch lib
MTD driver changes:
- Use mtd_device_register() instead of mtd_device_parse_register()
where applicable
- Use proper printk format to print physical addresses in the
solutionengine driver
- Add missing mtd_set_of_node() call in the powernv driver
- Remove unneeded variables in a few drivers
- Plug the TRX part parser to the DT partition parsers logic
- Check ioremap_cache() return code in the gpio-addr-flash driver
- Stop using VMLINUX_SYMBOL_STR() in gen_probe.c
SPI NOR core changes:
- Apply reset hacks only when reset is explicitly marked as broken in
the DT
SPI NOR driver changes:
- Minor cleanup/fixes in the m25p80 driver
- Release flash_np in the nxp-spifi driver
- Add suspend/resume hooks to the atmel-quadspi driver
- Include gpio/consumer.h instead of gpio.h in the atmel-quadspi
driver
- Use %pK instead of %p in the stm32-quadspi driver
- Improve timeout handling in the cadence-quadspi driver
- Use mtd_device_register() instead of mtd_device_parse_register() in
the intel-spi driver
NAND core changes:
- Add the SPI-NAND framework.
- Create a helper to find the best ECC configuration.
- Create NAND controller operations.
- Allocate dynamically ONFI parameters structure.
- Add defines for ONFI version bits.
- Add manufacturer fixup for ONFI parameter page.
- Add an option to specify NAND chip as a boot device.
- Add Reed-Solomon error correction algorithm.
- Better name for the controller structure.
- Remove unused caller_is_module() definition.
- Make subop helpers return unsigned values.
- Expose _notsupp() helpers for raw page accessors.
- Add default values for dynamic timings.
- Kill the chip->scan_bbt() hook.
- Rename nand_default_bbt() into nand_create_bbt().
- Start to clean the nand_chip structure.
- Remove stale prototype from rawnand.h.
Raw NAND controllers drivers changes:
- Qcom: structuring cleanup.
- Denali: use core helper to find the best ECC configuration.
- Possible build of almost all drivers by adding a dependency on
COMPILE_TEST for almost all of them in Kconfig, implies various
fixes, Kconfig cleanup, GPIO headers inclusion cleanup, and even
changes in sparc64 and ia64 architectures.
- Clean the ->probe() functions error path of a lot of drivers.
- Migrate all drivers to use nand_scan() instead of
nand_scan_ident()/nand_scan_tail() pair.
- Use mtd_device_register() where applicable to simplify the code.
- Marvell:
* Handle on-die ECC.
* Better clocks handling.
* Remove bogus comment.
* Add suspend and resume support.
- Tegra: add NAND controller driver.
- Atmel:
* Add module param to avoid using dma.
* Drop Wenyou Yang from MAINTAINERS.
- Denali: optimize timings handling.
- FSMC: Stop using chip->read_buf().
- FSL:
* Switch to SPDX license tag identifiers.
* Fix qualifiers in MXC init functions.
Raw NAND chip drivers changes:
- Micron:
* Add fixup for ONFI revision.
* Update ecc_stats.corrected.
* Make ECC activation stateful.
* Avoid enabling/disabling ECC when it can't be disabled.
* Get the actual number of bitflips.
* Allow forced on-die ECC.
* Support 8/512 on-die ECC.
* Fix on-die ECC detection logic.
- Hynix:
* Fix decoding the OOB size on H27UCG8T2BTR.
* Use ->exec_op() in hynix_nand_reg_write_op()"
* tag 'mtd/for-4.19' of git://git.infradead.org/linux-mtd: (188 commits)
mtd: rawnand: atmel: Select GENERIC_ALLOCATOR
MAINTAINERS: drop Wenyou Yang from Atmel NAND driver support
mtd: rawnand: allocate dynamically ONFI parameters during detection
mtd: spi-nor: only apply reset hacks to broken hardware
mtd: spi-nor: cadence-quadspi: fix timeout handling
mtd: spi-nor: atmel-quadspi: Include gpio/consumer.h instead of gpio.h
mtd: spi-nor: intel-spi: use mtd_device_register()
mtd: spi-nor: stm32-quadspi: replace "%p" with "%pK"
mtd: spi-nor: atmel-quadspi: add suspend/resume hooks
mtd: rawnand: allocate model parameter dynamically
mtd: rawnand: do not export nand_scan_[ident|tail]() anymore
mtd: rawnand: txx9ndfmc: convert driver to nand_scan()
mtd: rawnand: txx9ndfmc: clarify ECC parameters assignation
mtd: rawnand: tegra: convert driver to nand_scan()
mtd: rawnand: jz4740: convert driver to nand_scan()
mtd: rawnand: jz4740: group nand_scan_{ident, tail} calls
mtd: rawnand: jz4740: fix probe function error path
mtd: rawnand: docg4: convert driver to nand_scan()
mtd: rawnand: do not execute nand_scan_ident() if maxchips is zero
mtd: rawnand: atmel: convert driver to nand_scan()
...
An overview of the general architecture changes:
- Massive DMA ops refactoring from Christoph Hellwig (huzzah for
deleting crufty code!).
- We introduce NT_MIPS_DSP & NT_MIPS_FP_MODE ELF notes & corresponding
regsets to expose DSP ASE & floating point mode state respectively,
both for live debugging & core dumps.
- We better optimize our code by hard-coding cpu_has_* macros at
compile time where their values are known due to the ISA revision
that the kernel build is targeting.
- The EJTAG exception handler now better handles SMP systems, where it
was previously possible for CPUs to clobber a register value saved
by another CPU.
- Our implementation of memset() gained a couple of fixes for MIPSr6
systems to return correct values in some cases where stores fault.
- We now implement ioremap_wc() using the uncached-accelerated cache
coherency attribute where supported, which is detected during boot,
and fall back to plain uncached access where necessary. The
MIPS-specific (and unused in tree) ioremap_uncached_accelerated() &
ioremap_cacheable_cow() are removed.
- The prctl(PR_SET_FP_MODE, ...) syscall is better supported for SMP
systems by reworking the way we ensure remote CPUs that may be
running threads within the affected process switch mode.
- Systems using the MIPS Coherence Manager will now set the
MIPS_IC_SNOOPS_REMOTE flag to avoid some unnecessary cache
maintenance overhead when flushing the icache.
- A few fixes were made for building with clang/LLVM, which
now sucessfully builds kernels for many of our platforms.
- Miscellaneous cleanups all over.
And some platform-specific changes:
- ar7 gained stubs for a few clock API functions to fix build failures
for some drivers.
- ath79 gained support for a few new SoCs, a few fixes & better
gpio-keys support.
- Ci20 now exposes its SPI bus using the spi-gpio driver.
- The generic platform can now auto-detect a suitable value for
PHYS_OFFSET based upon the memory map described by the device tree,
allowing us to avoid wasting memory on page book-keeping for systems
where RAM starts at a non-zero physical address.
- Ingenic systems using the jz4740 platform code now link their
vmlinuz higher to allow for kernels of a realistic size.
- Loongson32 now builds the kernel targeting MIPSr1 rather than MIPSr2
to avoid CPU errata.
- Loongson64 gains a couple of fixes, a workaround for a write
buffering issue & support for the Loongson 3A R3.1 CPU.
- Malta now uses the piix4-poweroff driver to handle powering down.
- Microsemi Ocelot gained support for its SPI bus & NOR flash, its
second MDIO bus and can now be supported by a FIT/.itb image.
- Octeon saw a bunch of header cleanups which remove a lot of
duplicate or unused code.
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQRgLjeFAZEXQzy86/s+p5+stXUA3QUCW3G6JxUccGF1bC5idXJ0
b25AbWlwcy5jb20ACgkQPqefrLV1AN0n/gD/Rpdgay31G/4eTTKBmBrcaju6Shjt
/2Iu6WC5Sj4hDHUBAJSbuI+B9YjcNsjekBYxB/LLD7ImcLBl6nLMIvKmXLAL
=cUiF
-----END PGP SIGNATURE-----
Merge tag 'mips_4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Paul Burton:
"Here are the main MIPS changes for 4.19.
An overview of the general architecture changes:
- Massive DMA ops refactoring from Christoph Hellwig (huzzah for
deleting crufty code!).
- We introduce NT_MIPS_DSP & NT_MIPS_FP_MODE ELF notes &
corresponding regsets to expose DSP ASE & floating point mode state
respectively, both for live debugging & core dumps.
- We better optimize our code by hard-coding cpu_has_* macros at
compile time where their values are known due to the ISA revision
that the kernel build is targeting.
- The EJTAG exception handler now better handles SMP systems, where
it was previously possible for CPUs to clobber a register value
saved by another CPU.
- Our implementation of memset() gained a couple of fixes for MIPSr6
systems to return correct values in some cases where stores fault.
- We now implement ioremap_wc() using the uncached-accelerated cache
coherency attribute where supported, which is detected during boot,
and fall back to plain uncached access where necessary. The
MIPS-specific (and unused in tree) ioremap_uncached_accelerated() &
ioremap_cacheable_cow() are removed.
- The prctl(PR_SET_FP_MODE, ...) syscall is better supported for SMP
systems by reworking the way we ensure remote CPUs that may be
running threads within the affected process switch mode.
- Systems using the MIPS Coherence Manager will now set the
MIPS_IC_SNOOPS_REMOTE flag to avoid some unnecessary cache
maintenance overhead when flushing the icache.
- A few fixes were made for building with clang/LLVM, which now
sucessfully builds kernels for many of our platforms.
- Miscellaneous cleanups all over.
And some platform-specific changes:
- ar7 gained stubs for a few clock API functions to fix build
failures for some drivers.
- ath79 gained support for a few new SoCs, a few fixes & better
gpio-keys support.
- Ci20 now exposes its SPI bus using the spi-gpio driver.
- The generic platform can now auto-detect a suitable value for
PHYS_OFFSET based upon the memory map described by the device tree,
allowing us to avoid wasting memory on page book-keeping for
systems where RAM starts at a non-zero physical address.
- Ingenic systems using the jz4740 platform code now link their
vmlinuz higher to allow for kernels of a realistic size.
- Loongson32 now builds the kernel targeting MIPSr1 rather than
MIPSr2 to avoid CPU errata.
- Loongson64 gains a couple of fixes, a workaround for a write
buffering issue & support for the Loongson 3A R3.1 CPU.
- Malta now uses the piix4-poweroff driver to handle powering down.
- Microsemi Ocelot gained support for its SPI bus & NOR flash, its
second MDIO bus and can now be supported by a FIT/.itb image.
- Octeon saw a bunch of header cleanups which remove a lot of
duplicate or unused code"
* tag 'mips_4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (123 commits)
MIPS: Remove remnants of UASM_ISA
MIPS: netlogic: xlr: Remove erroneous check in nlm_fmn_send()
MIPS: VDSO: Force link endianness
MIPS: Always specify -EB or -EL when using clang
MIPS: Use dins to simplify __write_64bit_c0_split()
MIPS: Use read-write output operand in __write_64bit_c0_split()
MIPS: Avoid using array as parameter to write_c0_kpgd()
MIPS: vdso: Allow clang's --target flag in VDSO cflags
MIPS: genvdso: Remove GOT checks
MIPS: Remove obsolete MIPS checks for DST node "chosen@0"
MIPS: generic: Remove input symbols from defconfig
MIPS: Delete unused code in linux32.c
MIPS: Remove unused sys_32_mmap2
MIPS: Remove nabi_no_regargs
mips: dts: mscc: enable spi and NOR flash support on ocelot PCB123
mips: dts: mscc: Add spi on Ocelot
MIPS: Loongson: Merge load addresses
MIPS: Loongson: Set Loongson32 to MIPS32R1
MIPS: mscc: ocelot: add interrupt controller properties to GPIO controller
MIPS: generic: Select MIPS_AUTO_PFN_OFFSET
...
Add addition argument 'arch_uprobe' to uprobe_write_opcode().
We need this in later set of patches.
Link: http://lkml.kernel.org/r/20180809041856.1547-3-ravi.bangoria@linux.ibm.com
Reviewed-by: Song Liu <songliubraving@fb.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Pull perf update from Thomas Gleixner:
"The perf crowd presents:
Kernel updates:
- Removal of jprobes
- Cleanup and consolidatation the handling of kprobes
- Cleanup and consolidation of hardware breakpoints
- The usual pile of fixes and updates to PMUs and event descriptors
Tooling updates:
- Updates and improvements all over the place. Nothing outstanding,
just the (good) boring incremental grump work"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (103 commits)
perf trace: Do not require --no-syscalls to suppress strace like output
perf bpf: Include uapi/linux/bpf.h from the 'perf trace' script's bpf.h
perf tools: Allow overriding MAX_NR_CPUS at compile time
perf bpf: Show better message when failing to load an object
perf list: Unify metric group description format with PMU event description
perf vendor events arm64: Update ThunderX2 implementation defined pmu core events
perf cs-etm: Generate branch sample for CS_ETM_TRACE_ON packet
perf cs-etm: Generate branch sample when receiving a CS_ETM_TRACE_ON packet
perf cs-etm: Support dummy address value for CS_ETM_TRACE_ON packet
perf cs-etm: Fix start tracing packet handling
perf build: Fix installation directory for eBPF
perf c2c report: Fix crash for empty browser
perf tests: Fix indexing when invoking subtests
perf trace: Beautify the AF_INET & AF_INET6 'socket' syscall 'protocol' args
perf trace beauty: Add beautifiers for 'socket''s 'protocol' arg
perf trace beauty: Do not print NULL strarray entries
perf beauty: Add a generator for IPPROTO_ socket's protocol constants
tools include uapi: Grab a copy of linux/in.h
perf tests: Fix complex event name parsing
perf evlist: Fix error out while applying initial delay and LBR
...
Pull locking/atomics update from Thomas Gleixner:
"The locking, atomics and memory model brains delivered:
- A larger update to the atomics code which reworks the ordering
barriers, consolidates the atomic primitives, provides the new
atomic64_fetch_add_unless() primitive and cleans up the include
hell.
- Simplify cmpxchg() instrumentation and add instrumentation for
xchg() and cmpxchg_double().
- Updates to the memory model and documentation"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (48 commits)
locking/atomics: Rework ordering barriers
locking/atomics: Instrument cmpxchg_double*()
locking/atomics: Instrument xchg()
locking/atomics: Simplify cmpxchg() instrumentation
locking/atomics/x86: Reduce arch_cmpxchg64*() instrumentation
tools/memory-model: Rename litmus tests to comply to norm7
tools/memory-model/Documentation: Fix typo, smb->smp
sched/Documentation: Update wake_up() & co. memory-barrier guarantees
locking/spinlock, sched/core: Clarify requirements for smp_mb__after_spinlock()
sched/core: Use smp_mb() in wake_woken_function()
tools/memory-model: Add informal LKMM documentation to MAINTAINERS
locking/atomics/Documentation: Describe atomic_set() as a write operation
tools/memory-model: Make scripts executable
tools/memory-model: Remove ACCESS_ONCE() from model
tools/memory-model: Remove ACCESS_ONCE() from recipes
locking/memory-barriers.txt/kokr: Update Korean translation to fix broken DMA vs. MMIO ordering example
MAINTAINERS: Add Daniel Lustig as an LKMM reviewer
tools/memory-model: Fix ISA2+pooncelock+pooncelock+pombonce name
tools/memory-model: Add litmus test for full multicopy atomicity
locking/refcount: Always allow checked forms
...
Pull scheduler updates from Thomas Gleixner:
- Cleanup and improvement of NUMA balancing
- Refactoring and improvements to the PELT (Per Entity Load Tracking)
code
- Watchdog simplification and related cleanups
- The usual pile of small incremental fixes and improvements
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
watchdog: Reduce message verbosity
stop_machine: Reflow cpu_stop_queue_two_works()
sched/numa: Move task_numa_placement() closer to numa_migrate_preferred()
sched/numa: Use group_weights to identify if migration degrades locality
sched/numa: Update the scan period without holding the numa_group lock
sched/numa: Remove numa_has_capacity()
sched/numa: Modify migrate_swap() to accept additional parameters
sched/numa: Remove unused task_capacity from 'struct numa_stats'
sched/numa: Skip nodes that are at 'hoplimit'
sched/debug: Reverse the order of printing faults
sched/numa: Use task faults only if numa_group is not yet set up
sched/numa: Set preferred_node based on best_cpu
sched/numa: Simplify load_too_imbalanced()
sched/numa: Evaluate move once per node
sched/numa: Remove redundant field
sched/debug: Show the sum wait time of a task group
sched/fair: Remove #ifdefs from scale_rt_capacity()
sched/core: Remove get_cpu() from sched_fork()
sched/cpufreq: Clarify sugov_get_util()
sched/sysctl: Remove unused sched_time_avg_ms sysctl
...
Since at least the beginning of the git era we've declared our TLB
exception handling functions inconsistently. They're actually functions,
but we declare them as arrays of u32 where each u32 is an encoded
instruction. This has always been the case for arch/mips/mm/tlbex.c, and
has also been true for arch/mips/kernel/traps.c since commit
86a1708a9d ("MIPS: Make tlb exception handler definitions and
declarations match.") which aimed for consistency but did so by
consistently making the our C code inconsistent with our assembly.
This is all usually harmless, but when using GCC 7 or newer to build a
kernel targeting microMIPS (ie. CONFIG_CPU_MICROMIPS=y) it becomes
problematic. With microMIPS bit 0 of the program counter indicates the
ISA mode. When bit 0 is zero instructions are decoded using the standard
MIPS32 or MIPS64 ISA. When bit 0 is one instructions are decoded using
microMIPS. This means that function pointers become odd - their least
significant bit is one for microMIPS code. We work around this in cases
where we need to access code using loads & stores with our
msk_isa16_mode() macro which simply clears bit 0 of the value it is
given:
#define msk_isa16_mode(x) ((x) & ~0x1)
For example we do this for our TLB load handler in
build_r4000_tlb_load_handler():
u32 *p = (u32 *)msk_isa16_mode((ulong)handle_tlbl);
We then write code to p, expecting it to be suitably aligned (our LEAF
macro aligns functions on 4 byte boundaries, so (ulong)handle_tlbl will
give a value one greater than a multiple of 4 - ie. the start of a
function on a 4 byte boundary, with the ISA mode bit 0 set).
This worked fine up to GCC 6, but GCC 7 & onwards is smart enough to
presume that handle_tlbl which we declared as an array of u32s must be
aligned sufficiently that bit 0 of its address will never be set, and as
a result optimize out msk_isa16_mode(). This leads to p having an
address with bit 0 set, and when we go on to attempt to store code at
that address we take an address error exception due to the unaligned
memory access.
This leads to an exception prior to the kernel having configured its own
exception handlers, so we jump to whatever handlers the bootloader
configured. In the case of QEMU this results in a silent hang, since it
has no useful general exception vector.
Fix this by consistently declaring our TLB-related functions as
functions. For handle_tlbl(), handle_tlbs() & handle_tlbm() we do this
in asm/tlbex.h & we make use of the existing declaration of
tlbmiss_handler_setup_pgd() in asm/mmu_context.h. Our TLB handler
generation code in arch/mips/mm/tlbex.c is adjusted to deal with these
definitions, in most cases simply by casting the function pointers to
u32 pointers.
This allows us to include asm/mmu_context.h in arch/mips/mm/tlbex.c to
get the definitions of tlbmiss_handler_setup_pgd & pgd_current, removing
some needless duplication. Consistently using msk_isa16_mode() on
function pointers means we no longer need the
tlbmiss_handler_setup_pgd_start symbol so that is removed entirely.
Now that we're declaring our functions as functions GCC stops optimizing
out msk_isa16_mode() & a microMIPS kernel built with either GCC 7.3.0 or
8.1.0 boots successfully.
Signed-off-by: Paul Burton <paul.burton@mips.com>
We export tlbmiss_handler_setup_pgd in arch/mips/mm/tlbex.c close to a
declaration of it, rather than close to its definition as is standard.
We've supported exporting symbols in assembly code since commit
22823ab419 ("EXPORT_SYMBOL() for asm"), so move the export to follow
the function's (stub) definition.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Commit 33679a5037 ("MIPS: uasm: Remove needless ISA abstraction")
removed use of the MIPS_ISA preprocessor macro, but left a couple of
unused definitions of it behind.
Remove the dead code.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Use the standard WARN_ON instead.
If a small kernel is desired, WARN_ON can be disabled globally.
Also remove SSB_DEBUG. Besides WARN_ON it only adds a tiny debug check.
Include this check unconditionally.
Signed-off-by: Michael Buesch <m@bues.ch>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
In nlm_fmn_send() we have a loop which attempts to send a message
multiple times in order to handle the transient failure condition of a
lack of available credit. When examining the status register to detect
the failure we check for a condition that can never be true, which falls
foul of gcc 8's -Wtautological-compare:
In file included from arch/mips/netlogic/common/irq.c:65:
./arch/mips/include/asm/netlogic/xlr/fmn.h: In function 'nlm_fmn_send':
./arch/mips/include/asm/netlogic/xlr/fmn.h:304:22: error: bitwise
comparison always evaluates to false [-Werror=tautological-compare]
if ((status & 0x2) == 1)
^~
If the path taken if this condition were true all we do is print a
message to the kernel console. Since failures seem somewhat expected
here (making the console message questionable anyway) and the condition
has clearly never evaluated true we simply remove it, rather than
attempting to fix it to check status correctly.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20174/
Cc: Ganesan Ramalingam <ganesanr@broadcom.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Jayachandran C <jnair@caviumnetworks.com>
Cc: John Crispin <john@phrozen.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
When building the VDSO with clang it appears to invoke ld without
specifying endianness, even though clang itself was provided with a -EB
or -EL flag. This results in the build failing due to a mismatch between
the objects that are the input to ld, and the output it is attempting to
create:
VDSO arch/mips/vdso/vdso.so.dbg.raw
mips-linux-ld: arch/mips/vdso/elf.o: compiled for a big endian system
and target is little endian
mips-linux-ld: arch/mips/vdso/elf.o: endianness incompatible with that
of the selected emulation
mips-linux-ld: failed to merge target specific data of file
arch/mips/vdso/elf.o
...
Work around this problem by explicitly specifying the link endianness
using -Wl,-EB or -Wl,-EL when -EB or -EL are part of KBUILD_CFLAGS. This
resolves the build failure when using clang, and doesn't have any
negative effect on gcc.
Signed-off-by: Paul Burton <paul.burton@mips.com>
When building using clang, always specify -EB or -EL in order to ensure
we target the desired endianness.
Since clang cross compiles using a single compiler build with multiple
targets, our -dumpmachine tests which don't specify clang's --target
argument check output based upon the build machine rather than the
machine our build will target. This means our detection of whether to
specify -EB fails miserably & we never do. Providing the endianness flag
unconditionally for clang resolves this issue & simplifies the clang
path somewhat.
Signed-off-by: Paul Burton <paul.burton@mips.com>
The code in __write_64bit_c0_split() is used by MIPS32 kernels running
on MIPS64 CPUs to write a 64-bit value to a 64-bit coprocessor 0
register using a single 64-bit dmtc0 instruction. It does this by
combining the 2x 32-bit registers used to hold the 64-bit value into a
single register, which in the existing code involves three steps:
1) Zero extend register A which holds bits 31:0 of our data, since it
may have previously held a sign-extended value.
2) Shift register B which holds bits 63:32 of our data in bits 31:0
left by 32 bits, such that the bits forming our data are in the
position they'll be in the final 64-bit value & bits 31:0 of the
register are zero.
3) Or the two registers together to form the 64-bit value in one
64-bit register.
From MIPS r2 onwards we have a dins instruction which can effectively
perform all 3 of those steps using a single instruction.
Add a path for MIPS r2 & beyond which uses dins to take bits 31:0 from
register B & insert them into bits 63:32 of register A, giving us our
full 64-bit value in register A with one instruction.
Since we know that MIPS r2 & above support the sel field for the dmtc0
instruction, we don't bother special casing sel==0. Omiting the sel
field would assemble to exactly the same instruction as when we
explicitly specify that it equals zero.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Commit c22c804310 ("MIPS: Fix input modify in
__write_64bit_c0_split()") modified __write_64bit_c0_split() constraints
such that we have both an input & an output which we hope to assign to
the same registers, and modify the output rather than incorrectly
clobbering an input.
The way in which we use both an output & an input parameter with the
input constrained to share the output registers is a little convoluted &
also problematic for clang, which complains if the input & output values
have different widths. For example:
In file included from kernel/fork.c:98:
./arch/mips/include/asm/mmu_context.h:149:19: error: unsupported
inline asm: input with type 'unsigned long' matching output with
type 'unsigned long long'
write_c0_entryhi(cpu_asid(cpu, next));
~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~
./arch/mips/include/asm/mmu_context.h:93:2: note: expanded from macro
'cpu_asid'
(cpu_context((cpu), (mm)) & cpu_asid_mask(&cpu_data[cpu]))
^
./arch/mips/include/asm/mipsregs.h:1617:65: note: expanded from macro
'write_c0_entryhi'
#define write_c0_entryhi(val) __write_ulong_c0_register($10, 0, val)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~
./arch/mips/include/asm/mipsregs.h:1430:39: note: expanded from macro
'__write_ulong_c0_register'
__write_64bit_c0_register(reg, sel, val); \
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~
./arch/mips/include/asm/mipsregs.h:1400:41: note: expanded from macro
'__write_64bit_c0_register'
__write_64bit_c0_split(register, sel, value); \
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~
./arch/mips/include/asm/mipsregs.h:1498:13: note: expanded from macro
'__write_64bit_c0_split'
: "r,0" (val)); \
^~~
We can both fix this build failure & simplify the code somewhat by
assigning the __tmp variable with the input value in C prior to our
inline assembly, and then using a single read-write output operand (ie.
a constraint beginning with +) to provide this value to our assembly.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Passing an array (swapper_pg_dir) as the argument to write_c0_kpgd() in
setup_pw() will become problematic if we modify __write_64bit_c0_split()
to cast its val argument to unsigned long long, because for 32-bit
kernel builds the size of a pointer will differ from the size of an
unsigned long long. This would fall foul of gcc's pointer-to-int-cast
diagnostic.
Cast the value to a long, which should be the same width as the pointer
that we ultimately want & will be sign extended if required to the
unsigned long long that __write_64bit_c0_split() ultimately needs.
Signed-off-by: Paul Burton <paul.burton@mips.com>
The MIPS VDSO code filters out a subset of known-good flags from
KBUILD_CFLAGS to use when building VDSO libraries. When we build using
clang we need to allow the --target flag through, otherwise we'll
generally attempt to build the VDSO for the architecture of the build
machine rather than for MIPS.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20154/
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Our genvdso tool performs some rather paranoid checking that the VDSO
library isn't attempting to make use of a GOT by constraining the number
of entries that the GOT is allowed to contain to the minimum 2 entries
that are always generated by binutils.
Unfortunately lld prior to revision 334390 generates a third entry,
which is unused & thus harmless but falls foul of genvdso's checks &
causes the build to fail.
Since we already check that the VDSO contains no relocations it seems
reasonable to presume that it also doesn't contain use of a GOT, which
would involve relocations. Thus rather than attempting to work around
this issue by allowing 3 GOT entries when using lld, simply remove the
GOT checks which seem overly paranoid.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20152/
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
As there is precious little left in any DTS files referring to the
node "/chosen@0" as opposed to "/chosen", remove the two checks for
the former node name.
[paul.burton@mips.com:
The modified yamon-dt code only operates on
arch/mips/boot/dts/mti/sead3.dts right now, and that uses chosen
rather than chosen@0 anyway, so this should have no behavioural
effect.]
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20131/
Cc: linux-mips@linux-mips.org
The BTF conflicts were simple overlapping changes.
The virtio_net conflict was an overlap of a fix of statistics counter,
happening alongisde a move over to a bonafide statistics structure
rather than counting value on the stack.
Signed-off-by: David S. Miller <davem@davemloft.net>
generic_defconfig explicitly disables CONFIG_INPUT_MOUSEDEV,
CONFIG_INPUT_KEYBOARD & CONFIG_INPUT_MOUSE which results in warnings
when merging board config fragments if any of them require these
options. This is the case for the ranchu board, which means we've had
the following warning when configuring for generic platform targets
since commit f2d0b0d5c1 ("MIPS: ranchu: Add Ranchu as a new
generic-based board"):
$ make ARCH=mips 32r2el_defconfig
Using ./arch/mips/configs/generic_defconfig as base
Merging arch/mips/configs/generic/32r2.config
Merging arch/mips/configs/generic/el.config
Merging ./arch/mips/configs/generic/board-sead-3.config
Merging ./arch/mips/configs/generic/board-ranchu.config
Value of CONFIG_INPUT_KEYBOARD is redefined by fragment ./arch/mips/configs/generic/board-ranchu.config:
Previous value: # CONFIG_INPUT_KEYBOARD is not set
New value: CONFIG_INPUT_KEYBOARD=y
Merging ./arch/mips/configs/generic/board-ni169445.config
Merging ./arch/mips/configs/generic/board-boston.config
Merging ./arch/mips/configs/generic/board-ocelot.config
Merging ./arch/mips/configs/generic/board-xilfpga.config
scripts/kconfig/conf --olddefconfig Kconfig
#
# configuration written to .config
#
Resolve this by removing mention of the CONFIG_INPUT_* Kconfig symbols
from generic_defconfig, allowing them to take their default values &
allowing board config fragments to enable them without warnings.
This may be problematic if CONFIG_ARCH_MIGHT_HAVE_PC_SERIO is ever
enabled for CONFIG_MIPS_GENERIC=y configurations, but for now that isn't
the case so we can worry about that if & when it happens.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20109/
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Almost all architectures include it. Add a ARCH_NO_PREEMPT symbol to
disable preempt support for alpha, hexagon, non-coldfire m68k and
user mode Linux.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Move the source of lib/Kconfig.debug and arch/$(ARCH)/Kconfig.debug to
the top-level Kconfig. For two architectures that means moving their
arch-specific symbols in that menu into a new arch Kconfig.debug file,
and for a few more creating a dummy file so that we can include it
unconditionally.
Also move the actual 'Kernel hacking' menu to lib/Kconfig.debug, where
it belongs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Instead of duplicating the source statements in every architecture just
do it once in the toplevel Kconfig file.
Note that with this the inclusion of arch/$(SRCARCH/Kconfig moves out of
the top-level Kconfig into arch/Kconfig so that don't violate ordering
constraits while keeping a sensible menu structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The A() & AA() macros have been unused since commit 05e4396651
("[MIPS] Use SYSVIPC_COMPAT to fix various problems on N32"), which
switched to the more standard compat_ptr().
RLIM_INFINITY32, RESOURCE32() & struct rlimit32 have been present but
unused since the beginning of the git era.
Remove the dead code.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20108/
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
The sys_32_mmap2 function has been unused since we started using syscall
wrappers in commit dbda6ac089 ("MIPS: CVE-2009-0029: Enable syscall
wrappers."), and is indeed identical to the sys_mips_mmap2 function that
replaced it in sys32_call_table.
Remove the dead code.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20107/
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Our sigreturn functions make use of a macro named nabi_no_regargs to
declare 8 dummy arguments to a function, forcing the compiler to expect
a pt_regs structure on the stack rather than in argument registers. This
is an ugly hack which unnecessarily causes these sigreturn functions to
need to care about the calling convention of the ABI the kernel is built
for. Although this is abstracted via nabi_no_regargs, it's still ugly &
unnecessary.
Remove nabi_no_regargs & the struct pt_regs argument from sigreturn
functions, and instead use current_pt_regs() to find the struct pt_regs
on the stack, which works cleanly regardless of ABI.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20106/
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Systems based upon the Loongson 1B & 1C CPUs share the same load
address, as do those based upon Loongson 1A. Unify the definition of
this load address to reduce duplication & avoid the need for an extra
Loongson 1A case in future.
[paul.burton@mips.com: Rewrite commit message.]
Signed-off-by: 谢致邦 (XIE Zhibang) <Yeking@Red54.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/14927/
Cc: linux-mips@linux-mips.org
LS232 (Loonson 2-issue 32-bit, also called GS232 (Godson 2-issue 32-bit))
is the CPU core (microarchitecture) of Loongson 1A/1B/1C.
According to "LS232 用户手册 (LS232 User Manual)", LS232 implements the
MIPS32 Release 1 instruction set, and part of the MIPS32 Release 2
instruction set.
In the manual, LS232 implements all of the MIPS32R2 instruction set
except the FPU instructions, and LS232 also implements 5 FPU
instructions of the MIPS32R2 instruction set: CEIL.L.fmt, CVT.L.fmt,
FLOOR.L.fmt, TRUNC.L.fmt, and ROUND.L.fmt.
But a bug of the DI instruction has been found during tests, the DI
instruction can not disable interrupts in arch_local_irq_disable() with
CONFIG_PREEMPT_NONE=y and CFLAGS='-mno-branch-likely' in some cases.
[paul.burton@mips.com:
- Remove the _MIPS_ISA redefinition to match the change made for the
generic MIPSr1 CPUs by commit 344ebf0994 ("MIPS: Always use
-march=<arch>, not -<arch> shortcuts").]
Signed-off-by: 谢致邦 (XIE Zhibang) <Yeking@Red54.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/16155/
Cc: linux-mips@linux-mips.org
Cc: ralf@linux-mips.org
Enable CONFIG_MIPS_AUTO_PFN_OFFSET for the generic platform, allowing
it to avoid wasted book-keeping for pages with addresses lower than the
physical base address of memory.
This has a minimal impact on kernel text size, with 64r6el_defconfig
gaining 0.1% in size as reported by bloat-o-meter:
add/remove: 4/1 grow/shrink: 345/13 up/down: 9017/-392 (8625)
Function old new delta
pcpu_setup_first_chunk 1444 1780 +336
pcpu_alloc_first_chunk 864 1136 +272
start_kernel 1064 1288 +224
initcall_blacklist 224 372 +148
try_fill_recv 2088 2184 +96
...
Total: Before=8457273, After=8465898, chg +0.10%
The gain for systems with large offsets to physical memory & the ability
to continue using generic kernels on such systems seems well worth this
small cost.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Suggested-by: Vladimir Kondratiev <vladimir.kondratiev@intel.com>
Patchwork: https://patchwork.linux-mips.org/patch/20049/
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
On systems where physical memory begins at a non-zero address, defining
PHYS_OFFSET (which influences ARCH_PFN_OFFSET) can save us time & memory
by avoiding book-keeping for pages from address zero to the start of
memory.
Some MIPS platforms already make use of this, but with the definition of
PHYS_OFFSET being compile-time constant it hasn't been possible to
enable this optimization for a kernel which may run on systems with
varying physical memory base addresses.
Introduce a new Kconfig option CONFIG_MIPS_AUTO_PFN_OFFSET which, when
enabled, makes ARCH_PFN_OFFSET a variable & detects it from the boot
memory map (which for example may have been populated from DT). The
relationship with PHYS_OFFSET is reversed, with PHYS_OFFSET now being
based on ARCH_PFN_OFFSET. This is because ARCH_PFN_OFFSET is used far
more often, so avoiding the need for runtime calculation gives us a
smaller impact on kernel text size (0.1% rather than 0.15% for
64r6el_defconfig).
Signed-off-by: Paul Burton <paul.burton@mips.com>
Suggested-by: Vladimir Kondratiev <vladimir.kondratiev@intel.com>
Patchwork: https://patchwork.linux-mips.org/patch/20048/
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
isa_virt_to_bus() & isa_bus_to_virt() claim to treat ISA bus addresses
as being identical to physical addresses, but they fail to do so in the
presence of a non-zero PHYS_OFFSET.
Correct this by having them use virt_to_phys() & phys_to_virt(), which
consolidates the calculations to one place & ensures that ISA bus
addresses do indeed match physical addresses.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20047/
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: Vladimir Kondratiev <vladimir.kondratiev@intel.com>
Converting an address between cached & uncached (typically addresses in
(c)kseg0 & (c)kseg1 or 2 xkphys regions) should not depend upon
PHYS_OFFSET in any way - we're converting from a virtual address in one
unmapped region to a virtual address in another unmapped region.
For some reason our CAC_ADDR() & UNCAC_ADDR() macros make use of
PAGE_OFFSET, which typically includes PHYS_OFFSET. This means that
platforms with a non-zero PHYS_OFFSET typically have to workaround
miscalculation by these 2 macros by also defining UNCAC_BASE to a value
that isn't really correct.
It appears that an attempt has previously been made to address this with
commit 3f4579252aa1 ("MIPS: make CAC_ADDR and UNCAC_ADDR account for
PHYS_OFFSET") which was later undone by commit ed3ce16c3d ("Revert
"MIPS: make CAC_ADDR and UNCAC_ADDR account for PHYS_OFFSET"") which
also introduced the ar7 workaround. That attempt at a fix was roughly
equivalent, but essentially caused the CAC_ADDR() & UNCAC_ADDR() macros
to cancel out PHYS_OFFSET by adding & then subtracting it again. In his
revert Leonid is correct that using PHYS_OFFSET makes no sense in the
context of these macros, but appears to have missed its inclusion via
PAGE_OFFSET which means PHYS_OFFSET actually had an effect after the
revert rather than before it.
Here we fix this by modifying CAC_ADDR() & UNCAC_ADDR() to stop using
PAGE_OFFSET (& thus PHYS_OFFSET), instead using __pa() & __va() along
with UNCAC_BASE.
For UNCAC_ADDR(), __pa() will convert a cached address to a physical
address which we can simply use as an offset from UNCAC_BASE to obtain
an address in the uncached region.
For CAC_ADDR() we can undo the effect of UNCAC_ADDR() by subtracting
UNCAC_BASE and using __va() on the result.
With this change made, remove definitions of UNCAC_BASE from the ar7 &
pic32 platforms which appear to have defined them only to workaround
this problem.
Signed-off-by: Paul Burton <paul.burton@mips.com>
References: 3f4579252aa1 ("MIPS: make CAC_ADDR and UNCAC_ADDR account for PHYS_OFFSET")
References: ed3ce16c3d ("Revert "MIPS: make CAC_ADDR and UNCAC_ADDR account for PHYS_OFFSET"")
Patchwork: https://patchwork.linux-mips.org/patch/20046/
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: Vladimir Kondratiev <vladimir.kondratiev@intel.com>
- Revert an errata workaround for the BCM5300X platform that was
merged for v4.18-rc2 but has been found to cause hangs on at least
systems using the BCM4718A1.
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQRgLjeFAZEXQzy86/s+p5+stXUA3QUCW1zA0hUccGF1bC5idXJ0
b25AbWlwcy5jb20ACgkQPqefrLV1AN2QyAEAxicOismTbPgSI+2oiaOjJbF5KjXi
cPNCtDkjwkUafU4A/1jvJlXpw6UHRwFAr6fcfnPMcK6QyYiQ9NnSWz46QYkI
=X4uV
-----END PGP SIGNATURE-----
Merge tag 'mips_fixes_4.18_5' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fix from Paul Burton:
"Here's one more MIPS fix, reverting an errata workaround that was
merged for v4.18-rc2 but has since been found to cause system hangs on
some BCM4718A1-based systems by the OpenWRT project"
* tag 'mips_fixes_4.18_5' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
Revert "MIPS: BCM47XX: Enable 74K Core ExternalSync for PCIe erratum"
of_find_compatible_node() returns a device_node pointer with refcount
incremented and must be decremented explicitly.
As this code is using the result only to check presence of the interrupt
controller (!NULL) but not actually using the result otherwise the
refcount can be decremented here immediately again.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19820/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
The call to of_find_node_by_name returns a node pointer with refcount
incremented thus it must be explicitly decremented here after the last
usage.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19558/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
VDSO code should not be using smp_processor_id(), since it is executed
in user mode.
Introduce a VDSO-specific path which will cause a compile-time
or link-time error (depending upon support for __compiletime_error) if
the VDSO ever incorrectly attempts to use smp_processor_id().
[Matt Redfearn <matt.redfearn@imgtec.com>: Move before change to
smp_processor_id in series]
Signed-off-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/17932/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
mips_swiotlb_ops differs from the generic swiotlb_dma_ops only in that
it contains a mb() barrier after each operations that maps or syncs
dma memory to the device.
The dma operations are defined to not be memory barriers, but instead
the write* operations to kick the DMA off are supposed to contain them.
For mips this handled by war_io_reorder_wmb(), which evaluates to the
stronger wmb() instead of the pure compiler barrier barrier() for
just those platforms that use swiotlb, so I think we are covered
properly.
[paul.burton@mips.com:
- Include linux/swiotlb.h to fix build failures for configs with
CONFIG_SWIOTLB=y.]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20038/
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: linux-mips@linux-mips.org
Cc: iommu@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
This reverts commit 2a027b47db ("MIPS: BCM47XX: Enable 74K Core
ExternalSync for PCIe erratum").
Enabling ExternalSync caused a regression for BCM4718A1 (used e.g. in
Netgear E3000 and ASUS RT-N16): it simply hangs during PCIe
initialization. It's likely that BCM4717A1 is also affected.
I didn't notice that earlier as the only BCM47XX devices with PCIe I
own are:
1) BCM4706 with 2 x 14e4:4331
2) BCM4706 with 14e4:4360 and 14e4:4331
it appears that BCM4706 is unaffected.
While BCM5300X-ES300-RDS.pdf seems to document that erratum and its
workarounds (according to quotes provided by Tokunori) it seems not even
Broadcom follows them.
According to the provided info Broadcom should define CONF7_ES in their
SDK's mipsinc.h and implement workaround in the si_mips_init(). Checking
both didn't reveal such code. It *could* mean Broadcom also had some
problems with the given workaround.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Reported-by: Michael Marley <michael@michaelmarley.com>
Patchwork: https://patchwork.linux-mips.org/patch/20032/
URL: https://bugs.openwrt.org/index.php?do=details&task_id=1688
Cc: Tokunori Ikegami <ikegami@allied-telesis.co.jp>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
If a driver causes DMA cache maintenance with a zero length then we
currently BUG and kill the kernel. As this is a scenario that we may
well be able to recover from, WARN & return in the condition instead.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/14623/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
The binding for the USB PHY went thru before the driver. However the
new version of the driver now use the PHY core support for reset, and
this expect the reset to be named "phy". So remove the "usb-" prefix
from the the reset names.
Signed-off-by: Alban Bedel <albeu@free.fr>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/15282/
Cc: linux-kernel@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Antony Pavlov <antonynpavlov@gmail.com>
Cc: devicetree@vger.kernel.org
Cc: linux-mips@linux-mips.org
The RTC definitions were moved to the driver, remove them from the platform
header.
[paul.burton@mips.com:
- Also remove the unused tx4939_rtcptr which would use struct
tx4939_rtc_reg if it were ever expanded.]
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20024/
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
The ar724x pci driver expects the PCIe controller to be brought out of
reset by the bootloader.
At least the AVM Fritz 300E bootloader doesn't take care of releasing
the different PCIe controller related resets which causes an endless
hang as soon as either the PCIE Reset register (0x180f0018) or the PCI
Application Control register (0x180f0000) is read from.
Do the full "PCIE Root Complex Initialization Sequence" if the PCIe
host controller is still in reset during probing.
The QCA u-boot sleeps 10ms after the PCIE Application Control bit is
set to ready. It has been shown that 10ms might not be enough time if
PCIe should be used right after setting the bit. During my tests it
took up to 20ms till the link was up. Giving the link up to 100ms
should work for all cases.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19916/
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
This patch ensures, that the pinmux register is properly setup for the
boot console UART when early_printk is enabled.
[paul.burton@mips.com:
- s/poinmux/pinmux/
- s/uart/UART/
- Drop extraneous parentheses.]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
This patch adds a few additional cpu feature overrides so that they do not
need to be probed at runtime.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19914/
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
This patch disables irq on reboot to fix hang issues that were observed
due to pending interrupts.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19913/
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
The pinmux on QCA SoCs is controlled by a single register. The
"pinctrl-single" driver can be used but requires the target
to select PINCTRL.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19909/
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
This patch adds support for 2 new types of QCA silicon. TP9343 is
essentially the same as the QCA956X but is licensed by TPLink.
Signed-off-by: Weijie Gao <hackpascal@gmail.com>
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19911/
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
This patch adds many new registers for various QCA MIPS SoCs. The patch is
an aggragate of many contributions made to OpenWrt.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Henryk Heisig <hyniu@o2.pl>
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: Weijie Gao <hackpascal@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Julien Dusser <julien.dusser@free.fr>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19910/
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Ocelot now has a u-boot port, allow building FIT images instead of relying
on the legacy detection and builtin DTB.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19632/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Get rid of extern declarations in .c functions and included
the necessary header file. Also remove unused UART declares.
Signed-off-by: Steven J. Hill <steven.hill@cavium.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19477/
Cc: linux-mips@linux-mips.org
It is not immediately obvious what the expected inputs to these fault
handlers is and how they calculate the number of unset bytes. Having
stared deeply at this in order to fix some corner cases, add some
comments to assist those who follow.
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19339/
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: <linux-mips@linux-mips.org>
Cc: <linux-kernel@vger.kernel.org>
The __clear_user function is defined to return the number of bytes that
could not be cleared. From the underlying memset / bzero implementation
this means setting register a2 to that number on return. Currently if a
page fault is triggered within the MIPSr6 version of setting of initial
unaligned bytes, the value loaded into a2 on return is meaningless.
During the MIPSr6 version of the initial unaligned bytes block, register
a2 contains the number of bytes to be set beyond the initial unaligned
bytes. The t0 register is initally set to the number of unaligned bytes
- STORSIZE, effectively a negative version of the number of unaligned
bytes. This is then incremented before each byte is saved.
The label .Lbyte_fixup\@ is jumped to on page fault. Currently the value
in a2 is incorrectly replaced by 0 - t0 + 1, effectively the number of
unaligned bytes remaining. This leads to the failures being reported by
the following test code:
static int __init test_clear_user(void)
{
int j, k;
pr_info("\n\n\nTesting clear_user\n");
for (j = 0; j < 512; j++) {
if ((k = clear_user(NULL+3, j)) != j) {
pr_err("clear_user (NULL %d) returned %d\n", j, k);
}
}
return 0;
}
late_initcall(test_clear_user);
Which reports:
[ 3.965439] Testing clear_user
[ 3.973169] clear_user (NULL 8) returned 6
[ 3.976782] clear_user (NULL 9) returned 6
[ 3.980390] clear_user (NULL 10) returned 6
[ 3.984052] clear_user (NULL 11) returned 6
[ 3.987524] clear_user (NULL 12) returned 6
Fix this by subtracting t0 from a2 (rather than $0), effectivey giving:
unset_bytes = (#bytes - (#unaligned bytes)) - (-#unaligned bytes remaining + 1) + 1
a2 = a2 - t0 + 1
This fixes the value returned from __clear user when the number of bytes
to set is > LONGSIZE and the address is invalid and unaligned.
Unfortunately, this breaks the fixup handling for unaligned bytes after
the final long, where register a2 still contains the number of bytes
remaining to be set and the t0 register is to 0 - the number of
unaligned bytes remaining.
Because t0 is now is now subtracted from a2 rather than 0, the number of
bytes unset is reported incorrectly:
static int __init test_clear_user(void)
{
char *test;
int j, k;
pr_info("\n\n\nTesting clear_user\n");
test = vmalloc(PAGE_SIZE);
for (j = 256; j < 512; j++) {
if ((k = clear_user(test + PAGE_SIZE - 254, j)) != j - 254) {
pr_err("clear_user (%px %d) returned %d\n",
test + PAGE_SIZE - 254, j, k);
}
}
return 0;
}
late_initcall(test_clear_user);
[ 3.976775] clear_user (c00000000000df02 256) returned 4
[ 3.981957] clear_user (c00000000000df02 257) returned 6
[ 3.986425] clear_user (c00000000000df02 258) returned 8
[ 3.990850] clear_user (c00000000000df02 259) returned 10
[ 3.995332] clear_user (c00000000000df02 260) returned 12
[ 3.999815] clear_user (c00000000000df02 261) returned 14
Fix this by ensuring that a2 is set to 0 during the set of final
unaligned bytes.
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: 8c56208aff ("MIPS: lib: memset: Add MIPS R6 support")
Patchwork: https://patchwork.linux-mips.org/patch/19338/
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # v4.0+
Many architectural features have over time moved from being optional to
either be required or removed by newer architecture releases. This means
that in many cases we can know at compile time whether a feature will be
supported or not purely due to the knowledge we have about the ISA the
kernel build is targeting.
This patch introduces a bunch of utility macros for checking for
supported options, ASEs & combinations of those with ISA revisions. It
then makes use of these in the default definitions of cpu_has_* macros.
The result is that many of the macros become compile-time constant,
allowing more optimisation opportunities for the compiler - particularly
with kernels built for later ISA revisions.
To demonstrate the effect of this patch, the following table shows the
size in bytes of the kernel binary as reported by scripts/bloat-o-meter
for v4.12-rc4 maltasmvp_defconfig kernels with & without this patch. A
variant of maltasmvp_defconfig with CONFIG_CPU_MIPS32_R6 selected is
also shown, to demonstrate that MIPSr6 systems benefit more due to extra
features becoming required by that architecture revision. Builds of
pistachio_defconfig are also shown, as although this is a MIPSr2
platform it doesn't hardcode any features in a machine-specific
cpu-feature-overrides.h, which allows it to gain more from this patch
than the equivalent Malta r2 build.
Config | Before | After | Change
----------------|---------|---------|---------
maltasmvp | 7248316 | 7247714 | -602
maltasmvp + r6 | 6955595 | 6950777 | -4818
pistachio | 8650977 | 8363898 | -287079
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/16360/
Cc: Joshua Kinard <kumba@gentoo.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Make use of the spi-gpio driver to provide SPI support on the Ingenic
JZ4780 SoC using the pins that can be used with the SSI0 device as
GPIOs, until such time as we have support for the Ingenic SPI/SSI
controller.
[paul.burton@mips.com: Rewrite commit message.]
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19489/
Cc: James Hogan <jhogan@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: devicetree@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Enable CONFIG_SPI_GPIO in ci20_defconfig, in order to make use of the
spi-gpio driver in a further commit.
[paul.burton@mips.com: Rewrite commit message.]
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19488/
Cc: James Hogan <jhogan@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: devicetree@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
All Octeons starting with Octeon II have RAPIDIO controller which
can function even with PCI disabled.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Acked-by: Alexandre Bounine <alex.bou9@gmail.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19988/
Cc: linux-mips@linux-mips.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Introduce the same option as PPC and ARM already have because
RAPIDIO can function in the absence of PCI.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Acked-by: Alexandre Bounine <alex.bou9@gmail.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19987/
Cc: linux-mips@linux-mips.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
This is necessary to be able to include <linux/msi.h> when
CONFIG_GENERIC_MSI_IRQ_DOMAIN is enabled. Without this, a build with
CONFIG_GENERIC_MSI_IRQ_DOMAIN fails with:
In file included from include/linux/kvm_host.h:20:0,
from arch/mips/kernel/asm-offsets.c:24:
>> include/linux/msi.h:197:10: fatal error: asm/msi.h: No such file or directory
#include <asm/msi.h>
^~~~~~~~~~~
compilation terminated.
make[2]: *** [arch/mips/kernel/asm-offsets.s] Error 1
make[2]: Target '__build' not remade because of errors.
make[1]: *** [prepare0] Error 2
make[1]: Target 'prepare' not remade because of errors.
make: *** [sub-make] Error 2
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19986/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Hanna Hawa <hannah@marvell.com>
Having the zload address at 0x8060.0000 means the size of the
uncompressed kernel cannot be bigger than around 6 MiB, as it is
deflated at address 0x8001.0000.
This limit is too small; a kernel with some built-in drivers and things
like debugfs enabled will already be over 6 MiB in size, and so will
fail to extract properly.
To fix this, we bump the zload address from 0x8060.0000 to 0x8100.0000.
This is fine, as all the boards featuring Ingenic JZ SoCs have at least
32 MiB of RAM, and use u-boot or compatible bootloaders which won't
hardcode the load address but read it from the uImage's header.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19787/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Linux expects that if a CPU modifies a memory location, then that
modification will eventually become visible to other CPUs in the system.
Loongson 3 CPUs include a Store Fill Buffer (SFB) which sits between a
core & its L1 data cache, queueing memory accesses & allowing for faster
forwarding of data from pending stores to younger loads from the core.
Unfortunately the SFB prioritizes loads such that a continuous stream of
loads may cause a pending write to be buffered indefinitely. This is
problematic if we end up with 2 CPUs which each perform a store that the
other polls for - one or both CPUs may end up with their stores buffered
in the SFB, never reaching cache due to the continuous reads from the
poll loop. Such a deadlock condition has been observed whilst running
qspinlock code.
This patch changes the definition of cpu_relax() to smp_mb() for
Loongson-3, forcing a flush of the SFB on SMP systems which will cause
any pending writes to make it as far as the L1 caches where they will
become visible to other CPUs. If the kernel is not compiled for SMP
support, this will expand to a barrier() as before.
This workaround matches that currently implemented for ARM when
CONFIG_ARM_ERRATA_754327=y, which was introduced by commit 534be1d5a2
("ARM: 6194/1: change definition of cpu_relax() for ARM11MPCore").
Although the workaround is only required when the Loongson 3 SFB
functionality is enabled, and we only began explicitly enabling that
functionality in v4.7 with commit 1e820da3c9 ("MIPS: Loongson-3:
Introduce CONFIG_LOONGSON3_ENHANCEMENT"), existing or future firmware
may enable the SFB which means we may need the workaround backported to
earlier kernels too.
[paul.burton@mips.com:
- Reword commit message & comment.
- Limit stable backport to v3.15+ where we support Loongson 3 CPUs.]
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
References: 534be1d5a2 ("ARM: 6194/1: change definition of cpu_relax() for ARM11MPCore")
References: 1e820da3c9 ("MIPS: Loongson-3: Introduce CONFIG_LOONGSON3_ENHANCEMENT")
Patchwork: https://patchwork.linux-mips.org/patch/19830/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: Huacai Chen <chenhuacai@gmail.com>
Cc: stable@vger.kernel.org # v3.15+
This macro substitution is the shortcut to map cacheable IO memory
with coherent and write-back attributes. Since it is entirely unused
by kernel, lets just remove it.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Patchwork: https://patchwork.linux-mips.org/patch/19937/
CC: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Sinan Kaya <okaya@codeaurora.org>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Sergey.Semin@t-platforms.ru
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
ath79_ddr_wb_flush_base has the type void __iomem *, so register offsets
need to be a multiple of 4 in order to access the intended register.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: 24b0e3e84f ("MIPS: ath79: Improve the DDR controller interface")
Patchwork: https://patchwork.linux-mips.org/patch/19912/
Cc: Alban Bedel <albeu@free.fr>
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # 4.2+
Define an NT_MIPS_FP_MODE core file note and implement a corresponding
regset holding the state handled by PR_SET_FP_MODE and PR_GET_FP_MODE
prctl(2) requests. This lets debug software correctly interpret the
contents of floating-point general registers both in live debugging and
in core files, and also switch floating-point modes of a live process.
[paul.burton@mips.com:
- Changed NT_MIPS_FP_MODE to 0x801 to match first nibble of
NT_MIPS_DSP, which was also changed to avoid a conflict.]
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19331/
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Define an NT_MIPS_DSP core file note type and implement a corresponding
regset holding the DSP ASE register context, following the layout of the
`mips_dsp_state' structure, except for the DSPControl register stored as
a 64-bit rather than 32-bit quantity in a 64-bit note.
The lack of DSP ASE register saving to core files can be considered a
design flaw with commit e50c0a8fa6 ("Support the MIPS32 / MIPS64 DSP
ASE."), leading to an incomplete state being saved. Consequently no DSP
ASE regset has been created with commit 7aeb753b53 ("MIPS: Implement
task_user_regset_view."), when regset support was added to the MIPS
port.
Additionally there is no way for ptrace(2) to correctly access the DSP
accumulator registers in n32 processes with the existing interfaces.
This is due to 32-bit truncation of data passed with PTRACE_PEEKUSR and
PTRACE_POKEUSR requests, which cannot be avoided owing to how the data
types for ptrace(3) have been defined. This new NT_MIPS_DSP regset
fills the missing interface gap.
[paul.burton@mips.com:
- Change NT_MIPS_DSP to 0x800 to avoid conflict with NT_VMCOREDD
introduced by commit 2724273e8f ("vmcore: add API to collect
hardware dump in second kernel").
- Drop stable tag. Whilst I agree the lack of this functionality can
be considered a flaw in earlier DSP ASE support, it's still new
functionality which doesn't meet up to the requirements set out in
Documentation/process/stable-kernel-rules.rst.]
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
References: 7aeb753b53 ("MIPS: Implement task_user_regset_view.")
Patchwork: https://patchwork.linux-mips.org/patch/19330/
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Use the `unsigned long' rather than `__u32' type for DSP accumulator
registers, like with the regular MIPS multiply/divide accumulator and
general-purpose registers, as all are 64-bit in 64-bit implementations
and using a 32-bit data type leads to contents truncation on context
saving.
Update `arch_ptrace' and `compat_arch_ptrace' accordingly, removing
casts that are similarly not used with multiply/divide accumulator or
general-purpose register accesses.
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: e50c0a8fa6 ("Support the MIPS32 / MIPS64 DSP ASE.")
Patchwork: https://patchwork.linux-mips.org/patch/19329/
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # 2.6.15+
This way we will be able to compile the jz4740_nand driver when
COMPILE_TEST=y.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Acked-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
This way we will be able to compile the ndfmc driver when
COMPILE_TEST=y.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Acked-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The PCI_OHCI_INT_REG case in pci_ohci_read_reg() contains the following
if statement:
if ((lo & 0x00000f00) == CS5536_USB_INTR)
CS5536_USB_INTR expands to the constant 11, which gives us the following
condition which can never evaluate true:
if ((lo & 0xf00) == 11)
At least when using GCC 8.1.0 this falls foul of the tautoligcal-compare
warning, and since the code is built with the -Werror flag the build
fails.
Fix this by shifting lo right by 8 bits in order to match the
corresponding PCI_OHCI_INT_REG case in pci_ohci_write_reg().
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19861/
Cc: Huacai Chen <chenhc@lemote.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
prom_putchar() is used centrally in early printk infrastructure therefore
at least MIPS should agree on the function return type.
[paul.burton@mips.com:
- Include linux/types.h in asm/setup.h to gain the bool typedef before
we start include asm/setup.h elsewhere.
- Include asm/setup.h in all files that use or define prom_putchar().
- Also standardise on signed rather than unsigned char argument.]
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19842/
Cc: linux-mips@linux-mips.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Jonas Gorski <jonas.gorski@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
The MIPS implementation of pci_resource_to_user() introduced in v3.12 by
commit 4c2924b725 ("MIPS: PCI: Use pci_resource_to_user to map pci
memory space properly") incorrectly sets *end to the address of the
byte after the resource, rather than the last byte of the resource.
This results in userland seeing resources as a byte larger than they
actually are, for example a 32 byte BAR will be reported by a tool such
as lspci as being 33 bytes in size:
Region 2: I/O ports at 1000 [disabled] [size=33]
Correct this by subtracting one from the calculated end address,
reporting the correct address to userland.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Reported-by: Rui Wang <rui.wang@windriver.com>
Fixes: 4c2924b725 ("MIPS: PCI: Use pci_resource_to_user to map pci memory space properly")
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # v3.12+
Patchwork: https://patchwork.linux-mips.org/patch/19829/
This patch reduces down the conditionals in MIPS atomic code that deal
with a silicon bug in early R10000 cpus that required a workaround of
a branch-likely instruction following a store-conditional in order to
to guarantee the whole ll/sc sequence is atomic. As the only real
difference is a branch-likely instruction (beqzl) over a standard
branch (beqz), the conditional is reduced down to a single preprocessor
check at the top to pick the required instruction.
This requires writing the uses in assembler, thus we discard the
non-R10000 case that uses a mixture of a C do...while loop with
embedded assembler that was added back in commit 7837314d14 ("MIPS:
Get rid of branches to .subsections."). A note found in the git log
for commit 5999eca25c1f ("[MIPS] Improve branch prediction in ll/sc
atomic operations.") is also addressed.
The macro definition for the branch instruction and the code comment
derives from a patch sent in earlier by Paul Burton for various cmpxchg
cleanups.
[paul.burton@mips.com:
- Minor whitespace fix for checkpatch.]
Signed-off-by: Joshua Kinard <kumba@gentoo.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/17736/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <james.hogan@mips.com>
Cc: "Maciej W. Rozycki" <macro@mips.com>
Cc: linux-mips@linux-mips.org
This patch fixes an old bug in MIPS ll/sc atomics, in the
`atomic_sub_if_positive' and `atomic64_sub_if_positive' functions, for
the R10000_LLSC_WAR case where the result of the subu/dsubu instruction
would potentially not be made available to the sc/scd instruction due
to being in the delay-slot of the branch-likely (beqzl) instruction.
This also removes the need for the `noreorder' directive, allowing GAS
to use delay slot scheduling as needed.
The same fix is also applied to the standard branch (beqz) case in
preparation for a follow-up patch that will cleanup/merge the
R10000_LLSC_WAR and non-R10K sections together.
Signed-off-by: Joshua Kinard <kumba@gentoo.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Tested-by: Joshua Kinard <kumba@gentoo.org>
Patchwork: https://patchwork.linux-mips.org/patch/17735/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <james.hogan@mips.com>
Cc: "Maciej W. Rozycki" <macro@mips.com>
Cc: linux-mips@linux-mips.org
Commit 205e1b7f51 ("dma-mapping: warn when there is no
coherent_dma_mask") introduced a warning, if a device is missing a
coherent_dma_mask. ESP and sonic are using dma mapping functions, so
they need dma masks.
[paul.burton@mips.com:
- Wrap commit message.]
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19828/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Adaptive ioremap_wc() method is now available as of commit 9748e33e26
("mips: mm: Create UCA-based ioremap_wc() method"). We can use it to
obtain UnCached Accelerated (UCA) mappings safely on all MIPS systems,
and so we don't need the MIPS-specific ioremap_uncached_accelerated()
any longer. This macro hard-coded the UCA Cache Coherency Attribute
(CCA) in a manner that isn't safe for kernels that may run on different
CPUs, and it is also entirely unused so we can trivially remove it.
[paul.burton@mips.com:
- Reword the commit message a little.
- Remove CC stable.]
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19790/
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: okaya@codeaurora.org
Cc: chenhc@lemote.com
Cc: Sergey.Semin@t-platforms.ru
Cc: linux-kernel@vger.kernel.org
Modern MIPS cores (like P5600/6600, M5150/6520, end so on) which
got L2-cache on chip also can enable a special type Cache-Coherency
attribute (CCA) named UnCached Accelerated attribute (UCA). In this
way uncached accelerated accesses are treated the same way as
non-accelerated uncached accesses, but uncached stores are gathered
together for more efficient bus utilization. So to speak this CCA
enables uncached transactions to better utilize bus bandwidth via
burst transactions.
This is exactly why ioremap_wc() method has been introduced in Linux.
Alas MIPS-platform code hasn't implemented it so far, instead default
one has been used which was an alias to ioremap_nocache. In order to
fix this we added MIPS-specific ioremap_wc() macro substituted by
generic __ioremap_mode() method call with writecombine CPU-info
field passed. It shall create real ioremap_wc() method if CPU-cache
supports UCA feature and fall-back to _CACHE_UNCACHED attribute
if one doesn't. Additionally platform-specific io.h shall declare
ARCH_HAS_IOREMAP_WC macro as indication of architectural definition
of ioremap_wc() (similar to x86/powerpc).
[paul.burton@mips.com:
- Remove CC stable, this is new functionality.]
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19789/
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: okaya@codeaurora.org
Cc: chenhc@lemote.com
Cc: Sergey.Semin@t-platforms.ru
Cc: linux-kernel@vger.kernel.org
Many shash algorithms set .cra_flags = CRYPTO_ALG_TYPE_SHASH. But this
is redundant with the C structure type ('struct shash_alg'), and
crypto_register_shash() already sets the type flag automatically,
clearing any type flag that was already there. Apparently the useless
assignment has just been copy+pasted around.
So, remove the useless assignment from all the shash algorithms.
This patch shouldn't change any actual behavior.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We currently attempt to check whether a physical address range provided
to __ioremap() may be in use by the page allocator by examining the
value of PageReserved for each page in the region - lowmem pages not
marked reserved are presumed to be in use by the page allocator, and
requests to ioremap them fail.
The way we check this has been broken since commit 92923ca3aa ("mm:
meminit: only set page reserved in the memblock region"), because
memblock will typically not have any knowledge of non-RAM pages and
therefore those pages will not have the PageReserved flag set. Thus when
we attempt to ioremap a region outside of RAM we incorrectly fail
believing that the region is RAM that may be in use.
In most cases ioremap() on MIPS will take a fast-path to use the
unmapped kseg1 or xkphys virtual address spaces and never hit this path,
so the only way to hit it is for a MIPS32 system to attempt to ioremap()
an address range in lowmem with flags other than _CACHE_UNCACHED.
Perhaps the most straightforward way to do this is using
ioremap_uncached_accelerated(), which is how the problem was discovered.
Fix this by making use of walk_system_ram_range() to test the address
range provided to __ioremap() against only RAM pages, rather than all
lowmem pages. This means that if we have a lowmem I/O region, which is
very common for MIPS systems, we're free to ioremap() address ranges
within it. A nice bonus is that the test is no longer limited to lowmem.
The approach here matches the way x86 performed the same test after
commit c81c8a1eee ("x86, ioremap: Speed up check for RAM pages") until
x86 moved towards a slightly more complicated check using walk_mem_res()
for unrelated reasons with commit 0e4c12b45a ("x86/mm, resource: Use
PAGE_KERNEL protection for ioremap of memory pages").
Signed-off-by: Paul Burton <paul.burton@mips.com>
Reported-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Fixes: 92923ca3aa ("mm: meminit: only set page reserved in the memblock region")
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # v4.2+
Patchwork: https://patchwork.linux-mips.org/patch/19786/
This patch introduces SO_TXTIME. User space enables this option in
order to pass a desired future transmit time in a CMSG when calling
sendmsg(2). The argument to this socket option is a 8-bytes long struct
provided by the uapi header net_tstamp.h defined as:
struct sock_txtime {
clockid_t clockid;
u32 flags;
};
Note that new fields were added to struct sock by filling a 2-bytes
hole found in the struct. For that reason, neither the struct size or
number of cachelines were altered.
Signed-off-by: Richard Cochran <rcochran@linutronix.de>
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Collapse and simplify switch statements in functions.
Signed-off-by: Steven J. Hill <steven.hill@cavium.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19713/
Cc: linux-mips@linux-mips.org
Cc: Chandrakala Chavva <cchavva@caviumnetworks.com>
Create new CVMX_CIU_ADDR macro to improve readability.
Signed-off-by: Steven J. Hill <steven.hill@cavium.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19712/
Cc: linux-mips@linux-mips.org
Cc: Chandrakala Chavva <cchavva@caviumnetworks.com>
Get rid of all unused CIU macros and sort them. Verified with
'make allyesconfig' build test.
[paul.burton@mips.com:
- Also checked via convoluted grep invocation for use of all removed
macros within arch/mips/ & drivers/.]
Signed-off-by: Steven J. Hill <steven.hill@cavium.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19710/
Cc: linux-mips@linux-mips.org
Cc: Chandrakala Chavva <cchavva@caviumnetworks.com>
Convert remaining structures to use __BITFIELD_FIELD macro. Also
straighten up the description text and whitespace.
Signed-off-by: Steven J. Hill <steven.hill@cavium.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19709/
Cc: linux-mips@linux-mips.org
Cc: Chandrakala Chavva <cchavva@caviumnetworks.com>
Data types 'cvmx_ciu_qlm0' and 'cvmx_ciu_qlm1' are identical in
their usage and structure. Combine them and update the PCIe code.
Signed-off-by: Steven J. Hill <steven.hill@cavium.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19708/
Cc: linux-mips@linux-mips.org
Cc: Chandrakala Chavva <cchavva@caviumnetworks.com>
Remove all unused data types. Verified with a 'make allyesconfig'
and Cavium platform.
[paul.burton@mips.com:
- Also checked via convoluted grep invocation for use of all removed
structs & unions within arch/mips/ & drivers/.]
Signed-off-by: Steven J. Hill <steven.hill@cavium.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19711/
Cc: linux-mips@linux-mips.org
Cc: Chandrakala Chavva <cchavva@caviumnetworks.com>
Coldfire still provides its own variant of the clk API rather than using
the generic COMMON_CLK API. This generally works, but it causes some
link errors with drivers using the clk_round_rate(), clk_set_rate(),
clk_set_parent(), or clk_get_parent() functions when a platform lacks
those interfaces.
This adds empty stub implementations for each of them, and I don't even
try to do something useful here but instead just print a WARN() message
to make it obvious what is going on if they ever end up being called.
The drivers that call these won't be used on these platforms (otherwise
we'd get a link error today), so the added code is harmless bloat and
will warn about accidental use.
Based on commit bd7fefe1f0 ("ARM: w90x900: normalize clk API").
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19503/
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-m68k@lists.linux-m68k.org
Cc: linux-mips@linux-mips.org
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
The VDSO Makefile filters CFLAGS to select a subset which it uses whilst
building the VDSO ELF. One of the flags it allows through is the -march=
flag that selects the architecture/ISA to target.
Unfortunately in cases where CONFIG_CPU_MIPS32_R{1,2}=y and the
toolchain defaults to building for MIPS64, the main MIPS Makefile ends
up using the short-form -<arch> flags in cflags-y. This is because the
calls to cc-option always fail to use the long-form -march=<arch> flag
due to the lack of an -mabi=<abi> flag in KBUILD_CFLAGS at the point
where the cc-option function is executed. The resulting GCC invocation
is something like:
$ mips64-linux-gcc -Werror -march=mips32r2 -c -x c /dev/null -o tmp
cc1: error: '-march=mips32r2' is not compatible with the selected ABI
These short-form -<arch> flags are dropped by the VDSO Makefile's
filtering, and so we attempt to build the VDSO without specifying any
architecture. This results in an attempt to build the VDSO using
whatever the compiler's default architecture is, regardless of whether
that is suitable for the kernel configuration.
One encountered build failure resulting from this mismatch is a
rejection of the sync instruction if the kernel is configured for a
MIPS32 or MIPS64 r1 or r2 target but the toolchain defaults to an older
architecture revision such as MIPS1 which did not include the sync
instruction:
CC arch/mips/vdso/gettimeofday.o
/tmp/ccGQKoOj.s: Assembler messages:
/tmp/ccGQKoOj.s:273: Error: opcode not supported on this processor: mips1 (mips1) `sync'
/tmp/ccGQKoOj.s:329: Error: opcode not supported on this processor: mips1 (mips1) `sync'
/tmp/ccGQKoOj.s:520: Error: opcode not supported on this processor: mips1 (mips1) `sync'
/tmp/ccGQKoOj.s:714: Error: opcode not supported on this processor: mips1 (mips1) `sync'
/tmp/ccGQKoOj.s:1009: Error: opcode not supported on this processor: mips1 (mips1) `sync'
/tmp/ccGQKoOj.s:1066: Error: opcode not supported on this processor: mips1 (mips1) `sync'
/tmp/ccGQKoOj.s:1114: Error: opcode not supported on this processor: mips1 (mips1) `sync'
/tmp/ccGQKoOj.s:1279: Error: opcode not supported on this processor: mips1 (mips1) `sync'
/tmp/ccGQKoOj.s:1334: Error: opcode not supported on this processor: mips1 (mips1) `sync'
/tmp/ccGQKoOj.s:1374: Error: opcode not supported on this processor: mips1 (mips1) `sync'
/tmp/ccGQKoOj.s:1459: Error: opcode not supported on this processor: mips1 (mips1) `sync'
/tmp/ccGQKoOj.s:1514: Error: opcode not supported on this processor: mips1 (mips1) `sync'
/tmp/ccGQKoOj.s:1814: Error: opcode not supported on this processor: mips1 (mips1) `sync'
/tmp/ccGQKoOj.s:2002: Error: opcode not supported on this processor: mips1 (mips1) `sync'
/tmp/ccGQKoOj.s:2066: Error: opcode not supported on this processor: mips1 (mips1) `sync'
make[2]: *** [scripts/Makefile.build:318: arch/mips/vdso/gettimeofday.o] Error 1
make[1]: *** [scripts/Makefile.build:558: arch/mips/vdso] Error 2
make[1]: *** Waiting for unfinished jobs....
This can be reproduced for example by attempting to build
pistachio_defconfig using Arnd's GCC 8.1.0 mips64 toolchain from
kernel.org:
https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/8.1.0/x86_64-gcc-8.1.0-nolibc-mips64-linux.tar.xz
Resolve this problem by using the long-form -march=<arch> in all cases,
which makes it through the arch/mips/vdso/Makefile's filtering & is thus
consistently used to build both the kernel proper & the VDSO.
The use of cc-option to prefer the long-form & fall back to the
short-form flags makes no sense since the short-form is just an
abbreviation for the also-supported long-form in all GCC versions that
we support building with. This means there is no case in which we have
to use the short-form -<arch> flags, so we can simply remove them.
The manual redefinition of _MIPS_ISA is removed naturally along with the
use of the short-form flags that it accompanied, and whilst here we
remove the separate assembler ISA selection. I suspect that both of
these were only required due to the mips32 vs mips2 mismatch that was
introduced by commit 59b3e8e9aa ("[MIPS] Makefile crapectomy.") and
fixed but not cleaned up by commit 9200c0b2a0 ("[MIPS] Fix Makefile
bugs for MIPS32/MIPS64 R1 and R2.").
I've marked this for backport as far as v4.4 where the MIPS VDSO was
introduced. In earlier kernels there should be no ill effect to using
the short-form flags.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # v4.4+
Reviewed-by: James Hogan <jhogan@kernel.org>
Patchwork: https://patchwork.linux-mips.org/patch/19579/
random_ether_addr is a #define for eth_random_addr which is
generally preferred in kernel code by ~3:1
Convert the uses of random_ether_addr to enable removing the #define
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19600/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Annotate cpu_wait implementations using the __cpuidle macro which
places these functions in the .cpuidle.text section. This allows
cpu_in_idle() to return true for PC values which fall within these
functions, allowing nmi_backtrace() to produce cleaner output for CPUs
running idle functions. For example:
# echo l >/proc/sysrq-trigger
[ 38.587170] sysrq: SysRq : Show backtrace of all active CPUs
[ 38.593657] NMI backtrace for cpu 1
[ 38.597611] CPU: 1 PID: 161 Comm: sh Not tainted 4.18.0-rc1+ #27
[ 38.604306] Stack : 00000000 00000004 00000006 80486724 00000000 00000000 00000000 00000000
[ 38.613647] 80e17eda 00000034 00000000 00000000 80d20000 80b67e98 8e559c90 0ffe1e88
[ 38.622986] 00000000 00000000 80e70000 00000000 8f61db18 38312e34 722d302e 202b3163
[ 38.632324] 8e559d3c 8e559adc 00000001 6b636162 80d20000 80000000 00000000 80d1cfa4
[ 38.641664] 00000001 80d20000 80d19520 00000000 00000003 80836724 00000004 80e10004
[ 38.650993] ...
[ 38.653724] Call Trace:
[ 38.656499] [<8040cdd0>] show_stack+0xa0/0x144
[ 38.661475] [<80b67e98>] dump_stack+0xe8/0x120
[ 38.666455] [<80b6f6d4>] nmi_cpu_backtrace+0x1b4/0x1cc
[ 38.672189] [<80b6f81c>] nmi_trigger_cpumask_backtrace+0x130/0x1e4
[ 38.679081] [<808295d8>] __handle_sysrq+0xc0/0x180
[ 38.684421] [<80829b84>] write_sysrq_trigger+0x50/0x64
[ 38.690176] [<8061c984>] proc_reg_write+0xd0/0xfc
[ 38.695447] [<805aac1c>] __vfs_write+0x54/0x194
[ 38.700500] [<805aaf24>] vfs_write+0xe0/0x18c
[ 38.705360] [<805ab190>] ksys_write+0x7c/0xf0
[ 38.710238] [<80416018>] syscall_common+0x34/0x58
[ 38.715558] Sending NMI from CPU 1 to CPUs 0,2-3:
[ 38.720916] NMI backtrace for cpu 0 skipped: idling at r4k_wait_irqoff+0x2c/0x34
[ 38.729186] NMI backtrace for cpu 3 skipped: idling at r4k_wait_irqoff+0x2c/0x34
[ 38.737449] NMI backtrace for cpu 2 skipped: idling at r4k_wait_irqoff+0x2c/0x34
Without this we get register value & backtrace output from all CPUs,
which is generally useless for those running the idle function & serves
only to overwhelm & obfuscate the meaningful output from non-idle CPUs.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/19598/
The current MIPS implementation of arch_trigger_cpumask_backtrace() is
broken because it attempts to use synchronous IPIs despite the fact that
it may be run with interrupts disabled.
This means that when arch_trigger_cpumask_backtrace() is invoked, for
example by the RCU CPU stall watchdog, we may:
- Deadlock due to use of synchronous IPIs with interrupts disabled,
causing the CPU that's attempting to generate the backtrace output
to hang itself.
- Not succeed in generating the desired output from remote CPUs.
- Produce warnings about this from smp_call_function_many(), for
example:
[42760.526910] INFO: rcu_sched detected stalls on CPUs/tasks:
[42760.535755] 0-...!: (1 GPs behind) idle=ade/140000000000000/0 softirq=526944/526945 fqs=0
[42760.547874] 1-...!: (0 ticks this GP) idle=e4a/140000000000000/0 softirq=547885/547885 fqs=0
[42760.559869] (detected by 2, t=2162 jiffies, g=266689, c=266688, q=33)
[42760.568927] ------------[ cut here ]------------
[42760.576146] WARNING: CPU: 2 PID: 1216 at kernel/smp.c:416 smp_call_function_many+0x88/0x20c
[42760.587839] Modules linked in:
[42760.593152] CPU: 2 PID: 1216 Comm: sh Not tainted 4.15.4-00373-gee058bb4d0c2 #2
[42760.603767] Stack : 8e09bd20 8e09bd20 8e09bd20 fffffff0 00000007 00000006 00000000 8e09bca8
[42760.616937] 95b2b379 95b2b379 807a0080 00000007 81944518 0000018a 00000032 00000000
[42760.630095] 00000000 00000030 80000000 00000000 806eca74 00000009 8017e2b8 000001a0
[42760.643169] 00000000 00000002 00000000 8e09baa4 00000008 808b8008 86d69080 8e09bca0
[42760.656282] 8e09ad50 805e20aa 00000000 00000000 00000000 8017e2b8 00000009 801070ca
[42760.669424] ...
[42760.673919] Call Trace:
[42760.678672] [<27fde568>] show_stack+0x70/0xf0
[42760.685417] [<84751641>] dump_stack+0xaa/0xd0
[42760.692188] [<699d671c>] __warn+0x80/0x92
[42760.698549] [<68915d41>] warn_slowpath_null+0x28/0x36
[42760.705912] [<f7c76c1c>] smp_call_function_many+0x88/0x20c
[42760.713696] [<6bbdfc2a>] arch_trigger_cpumask_backtrace+0x30/0x4a
[42760.722216] [<f845bd33>] rcu_dump_cpu_stacks+0x6a/0x98
[42760.729580] [<796e7629>] rcu_check_callbacks+0x672/0x6ac
[42760.737476] [<059b3b43>] update_process_times+0x18/0x34
[42760.744981] [<6eb94941>] tick_sched_handle.isra.5+0x26/0x38
[42760.752793] [<478d3d70>] tick_sched_timer+0x1c/0x50
[42760.759882] [<e56ea39f>] __hrtimer_run_queues+0xc6/0x226
[42760.767418] [<e88bbcae>] hrtimer_interrupt+0x88/0x19a
[42760.775031] [<6765a19e>] gic_compare_interrupt+0x2e/0x3a
[42760.782761] [<0558bf5f>] handle_percpu_devid_irq+0x78/0x168
[42760.790795] [<90c11ba2>] generic_handle_irq+0x1e/0x2c
[42760.798117] [<1b6d462c>] gic_handle_local_int+0x38/0x86
[42760.805545] [<b2ada1c7>] gic_irq_dispatch+0xa/0x14
[42760.812534] [<90c11ba2>] generic_handle_irq+0x1e/0x2c
[42760.820086] [<c7521934>] do_IRQ+0x16/0x20
[42760.826274] [<9aef3ce6>] plat_irq_dispatch+0x62/0x94
[42760.833458] [<6a94b53c>] except_vec_vi_end+0x70/0x78
[42760.840655] [<22284043>] smp_call_function_many+0x1ba/0x20c
[42760.848501] [<54022b58>] smp_call_function+0x1e/0x2c
[42760.855693] [<ab9fc705>] flush_tlb_mm+0x2a/0x98
[42760.862730] [<0844cdd0>] tlb_flush_mmu+0x1c/0x44
[42760.869628] [<cb259b74>] arch_tlb_finish_mmu+0x26/0x3e
[42760.877021] [<1aeaaf74>] tlb_finish_mmu+0x18/0x66
[42760.883907] [<b3fce717>] exit_mmap+0x76/0xea
[42760.890428] [<c4c8a2f6>] mmput+0x80/0x11a
[42760.896632] [<a41a08f4>] do_exit+0x1f4/0x80c
[42760.903158] [<ee01cef6>] do_group_exit+0x20/0x7e
[42760.909990] [<13fa8d54>] __wake_up_parent+0x0/0x1e
[42760.917045] [<46cf89d0>] smp_call_function_many+0x1a2/0x20c
[42760.924893] [<8c21a93b>] syscall_common+0x14/0x1c
[42760.931765] ---[ end trace 02aa09da9dc52a60 ]---
[42760.938342] ------------[ cut here ]------------
[42760.945311] WARNING: CPU: 2 PID: 1216 at kernel/smp.c:291 smp_call_function_single+0xee/0xf8
...
This patch switches MIPS' arch_trigger_cpumask_backtrace() to use async
IPIs & smp_call_function_single_async() in order to resolve this
problem. We ensure use of the pre-allocated call_single_data_t
structures is serialized by maintaining a cpumask indicating that
they're busy, and refusing to attempt to send an IPI when a CPU's bit is
set in this mask. This should only happen if a CPU hasn't responded to a
previous backtrace IPI - ie. if it's hung - and we print a warning to
the console in this case.
I've marked this for stable branches as far back as v4.9, to which it
applies cleanly. Strictly speaking the faulty MIPS implementation can be
traced further back to commit 856839b768 ("MIPS: Add
arch_trigger_all_cpu_backtrace() function") in v3.19, but kernel
versions v3.19 through v4.8 will require further work to backport due to
the rework performed in commit 9a01c3ed5c ("nmi_backtrace: add more
trigger_*_cpu_backtrace() methods").
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19597/
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # v4.9+
Fixes: 856839b768 ("MIPS: Add arch_trigger_all_cpu_backtrace() function")
Fixes: 9a01c3ed5c ("nmi_backtrace: add more trigger_*_cpu_backtrace() methods")
The generic nmi_cpu_backtrace() function calls show_regs() when a struct
pt_regs is available, and dump_stack() otherwise. If we were to make use
of the generic nmi_cpu_backtrace() with MIPS' current implementation of
show_regs() this would mean that we see only register data with no
accompanying stack information, in contrast with our current
implementation which calls dump_stack() regardless of whether register
state is available.
In preparation for making use of the generic nmi_cpu_backtrace() to
implement arch_trigger_cpumask_backtrace(), have our implementation of
show_regs() call dump_stack() and drop the explicit dump_stack() call in
arch_dump_stack() which is invoked by arch_trigger_cpumask_backtrace().
This will allow the output we produce to remain the same after a later
patch switches to using nmi_cpu_backtrace(). It may mean that we produce
extra stack output in other uses of show_regs(), but this:
1) Seems harmless.
2) Is good for consistency between arch_trigger_cpumask_backtrace()
and other users of show_regs().
3) Matches the behaviour of the ARM & PowerPC architectures.
Marked for stable back to v4.9 as a prerequisite of the following patch
"MIPS: Call dump_stack() from show_regs()".
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19596/
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # v4.9+
Commit 784e0300fe ("rseq: Avoid infinite recursion when delivering
SIGSEGV") added a new ksig argument to the rseq_signal_deliver() &
rseq_handle_notify_resume() functions, and was merged in v4.18-rc2.
Meanwhile MIPS support for restartable sequences was also merged in
v4.18-rc2 with commit 9ea141ad54 ("MIPS: Add support for restartable
sequences"), and therefore didn't get updated for the API change.
This results in build failures like the following:
CC arch/mips/kernel/signal.o
arch/mips/kernel/signal.c: In function 'handle_signal':
arch/mips/kernel/signal.c:804:22: error: passing argument 1 of
'rseq_signal_deliver' from incompatible pointer type
[-Werror=incompatible-pointer-types]
rseq_signal_deliver(regs);
^~~~
In file included from ./include/linux/context_tracking.h:5,
from arch/mips/kernel/signal.c:12:
./include/linux/sched.h:1811:56: note: expected 'struct ksignal *' but
argument is of type 'struct pt_regs *'
static inline void rseq_signal_deliver(struct ksignal *ksig,
~~~~~~~~~~~~~~~~^~~~
arch/mips/kernel/signal.c:804:2: error: too few arguments to function
'rseq_signal_deliver'
rseq_signal_deliver(regs);
^~~~~~~~~~~~~~~~~~~
Fix this by adding the ksig argument as was done for other architectures
in commit 784e0300fe ("rseq: Avoid infinite recursion when delivering
SIGSEGV").
Signed-off-by: Paul Burton <paul.burton@mips.com>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Patchwork: https://patchwork.linux-mips.org/patch/19603/
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Remove the function sb1_dma_init() that is not used anywhere.
This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Patchwork: https://patchwork.linux-mips.org/patch/8873/
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: John Crispin <blogic@openwrt.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Remove the function pci_enable_swapping() that is not used anywhere.
This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Patchwork: https://patchwork.linux-mips.org/patch/8867/
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: John Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Remove the platform code used to power down the system, instead relying
upon the new PIIX4 poweroff driver. This reduces the amount of platform
code required for the Malta board in preparation for allowing it to be
part of a more generic kernel.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/14282/
DMA coherence is not user-selectable in Kconfig, and Malta selects
CONFIG_DMA_MAYBE_COHERENT which in turn selects CONFIG_DMA_NONCOHERENT.
Remove #ifdefs whose conditions can therefore never be true for Malta.
This removes a significant amount of code from bonito_quirks_setup(),
but the code is duplicated in plat_enable_iocoherency() anyway so we
lose nothing but duplication.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/14188/
In systems that include a MIPS Coherency Manager, the icache always
fills from a cache which is coherent across all CPUs. In I6400 & I6500
systems the icache fills from the dcache which is coherent across all
CPUs. In all other CM-based systems the icache fills from the L2 cache
which is shared between all cores.
This means that an icache will always see stores from remote CPUs
without needing to write them back any further than that L2, which is
what the cpu_icache_snoops_remote_store feature is used to test. In
order for it to return 1 without needing a per-platform override (which
is what Malta has relied upon so far) set the MIPS_IC_SNOOPS_REMOTE flag
when a CM is present.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16200/
This is a manual cherrypick of commit c7ddc3d137b7 from Alastair
Bridgewater's IP35 tree that replaces two cases of
"if (bus->number > 0)" with a more correct "if (!pci_is_root_bus(bus))"
in arch/mips/pci/ops-bridge.c.
Cc: linux-mips@linux-mips.org
Cc: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Suggested-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Joshua Kinard <kumba@gentoo.org>
Patchwork: https://patchwork.linux-mips.org/patch/17501/
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Linux/MIPS <linux-mips@linux-mips.org>
Commit 6b8322576e ("MIPS: Force CPUs to lose FP context during mode
switches") ensures that we react to PR_SET_FP_MODE prctl syscalls
quickly by broadcasting an IPI in order to cause CPUs to lose FPU access
when necessary. Whilst it achieves that, unfortunately it causes all
sorts of strange race conditions because:
1) The IPI may arrive at a point where the FPU is in the process of
being enabled, but that process is not yet complete leading to a
state we aren't prepared to handle. For example:
[ 370.215903] do_cpu invoked from kernel context![#1]:
[ 370.221064] CPU: 0 PID: 963 Comm: fp-prctl Not tainted 4.9.0-rc5-00323-g210db32-dirty #226
[ 370.229420] task: a8000000fd672e00 task.stack: a8000000fd630000
[ 370.235399] $ 0 : 0000000000000000 0000000000000001 0000000000000001 a8000000fd630000
[ 370.243882] $ 4 : a8000000fd672e00 0000000000000000 0000000000000453 0000000000000000
[ 370.252317] $ 8 : 0000000000000000 a8000000fd637c28 1000000000000000 0000000000000010
[ 370.260753] $12 : 00000000140084e0 ffffffff80109c00 0000000000000000 0000000000000002
[ 370.269179] $16 : ffffffff8092f080 a8000000fd672e00 ffffffff80107fe8 a8000000fd485000
[ 370.277612] $20 : ffffffff8084d328 ffffffff80940000 0000000000000009 ffffffff80930000
[ 370.286038] $24 : 0000000000000000 900000001612048c
[ 370.294476] $28 : a8000000fd630000 a8000000fd637ac0 ffffffff80937300 ffffffff8010807c
[ 370.302909] Hi : 0000000000000000
[ 370.306595] Lo : 0000000000000200
[ 370.310376] epc : ffffffff80115d38 _save_fp+0x10/0xa0
[ 370.315784] ra : ffffffff8010807c prepare_for_fp_mode_switch+0x94/0x1b0
[ 370.322707] Status: 140084e2 KX SX UX KERNEL EXL
[ 370.327980] Cause : 1080002c (ExcCode 0b)
[ 370.332091] PrId : 0001a428 (MIPS P6600)
[ 370.336179] Modules linked in:
[ 370.339486] Process fp-prctl (pid: 963, threadinfo=a8000000fd630000, task=a8000000fd672e00, tls=00000000756e67d0)
[ 370.349724] Stack : 0000000000000000 a8000000fd557dc0 0000000000000000 ffffffff801ca8e0
[ 370.358161] 0000000000000000 a8000000fd637b9c 0000000000000009 ffffffff80923780
[ 370.366575] ffffffff80850000 ffffffff8011610c 00000000000000b8 ffffffff801a5084
[ 370.374989] ffffffff8084a370 ffffffff8084a388 ffffffff80923780 ffffffff80923828
[ 370.383395] 0000000000010000 ffffffff809237a8 0000000000020000 ffffffff80a40000
[ 370.391817] 000000000000007c 00000000004a0000 00000000756dedd0 ffffffff801a5188
[ 370.400230] a800000002014900 0000000000000001 ffffffff80923780 0000000080923828
[ 370.408644] ffffffff80923780 ffffffff80923780 ffffffff80923828 ffffffff801a521c
[ 370.417066] ffffffff80923780 ffffffff80923828 0000000000010000 ffffffff801a8f84
[ 370.425472] ffffffff80a40000 a8000000fd637c20 ffffffff80a39240 0000000000000001
[ 370.433885] ...
[ 370.436562] Call Trace:
[ 370.439222] [<ffffffff80115d38>] _save_fp+0x10/0xa0
[ 370.444305] [<ffffffff8010807c>] prepare_for_fp_mode_switch+0x94/0x1b0
[ 370.451035] [<ffffffff801ca8e0>] flush_smp_call_function_queue+0xf8/0x230
[ 370.457991] [<ffffffff8011610c>] ipi_call_interrupt+0xc/0x20
[ 370.463814] [<ffffffff801a5084>] __handle_irq_event_percpu+0xc4/0x1a8
[ 370.470404] [<ffffffff801a5188>] handle_irq_event_percpu+0x20/0x68
[ 370.476734] [<ffffffff801a521c>] handle_irq_event+0x4c/0x88
[ 370.482486] [<ffffffff801a8f84>] handle_edge_irq+0x12c/0x210
[ 370.488316] [<ffffffff801a47a0>] generic_handle_irq+0x38/0x48
[ 370.494280] [<ffffffff804a2dbc>] gic_handle_shared_int+0x194/0x268
[ 370.500616] [<ffffffff801a47a0>] generic_handle_irq+0x38/0x48
[ 370.506529] [<ffffffff80107e60>] do_IRQ+0x18/0x28
[ 370.511445] [<ffffffff804a1524>] plat_irq_dispatch+0xc4/0x140
[ 370.517339] [<ffffffff80106230>] ret_from_irq+0x0/0x4
[ 370.522583] [<ffffffff8010fad4>] do_ri+0x4fc/0x7e8
[ 370.527546] [<ffffffff80106220>] ret_from_exception+0x0/0x10
2) The IPI may arrive during kernel use of the FPU, since we generally
only disable preemption around use of the FPU & leave interrupts
enabled. This can lead to us unexpectedly losing access to the FPU
in places where it previously had not been possible. For example:
do_cpu invoked from kernel context![#2]:
CPU: 2 PID: 7338 Comm: fp-prctl Tainted: G D 4.7.0-00424-g49b0c82
#2
task: 838e4000 ti: 88d38000 task.ti: 88d38000
$ 0 : 00000000 00000001 ffffffff 88d3fef8
$ 4 : 838e4000 88d38004 00000000 00000001
$ 8 : 3400fc01 801f8020 808e9100 24000000
$12 : dbffffff 807b69d8 807b0000 00000000
$16 : 00000000 80786150 00400fc4 809c0398
$20 : 809c0338 0040273c 88d3ff28 808e9d30
$24 : 808e9d30 00400fb4
$28 : 88d38000 88d3fe88 00000000 8011a2ac
Hi : 0040273c
Lo : 88d3ff28
epc : 80114178 _restore_fp+0x10/0xa0
ra : 8011a2ac mipsr2_decoder+0xd5c/0x1660
Status: 1400fc03 KERNEL EXL IE
Cause : 1080002c (ExcCode 0b)
PrId : 0001a920 (MIPS I6400)
Modules linked in:
Process fp-prctl (pid: 7338, threadinfo=88d38000, task=838e4000, tls=766527d0)
Stack : 00000000 00000000 00000000 88d3fe98 00000000 00000000 809c0398 809c0338
808e9100 00000000 88d3ff28 00400fc4 00400fc4 0040273c 7fb69e18 004a0000
004a0000 004a0000 7664add0 8010de18 00000000 00000000 88d3fef8 88d3ff28
808e9100 00000000 766527d0 8010e534 000c0000 85755000 8181d580 00000000
00000000 00000000 004a0000 00000000 766527d0 7fb69e18 004a0000 80105c20
...
Call Trace:
[<80114178>] _restore_fp+0x10/0xa0
[<8011a2ac>] mipsr2_decoder+0xd5c/0x1660
[<8010de18>] do_ri+0x90/0x6b8
[<80105c20>] ret_from_exception+0x0/0x10
At first glance a simple fix may seem to be to disable interrupts around
kernel use of the FPU rather than merely preemption, however this would
introduce further overhead outside of the mode switch path & doesn't
solve the third problem:
3) The IPI may arrive whilst the kernel is running code that will lead
to a preempt_disable() call & FPU usage soon. If this happens then
the IPI will be serviced & we'll proceed to enable an FPU whilst the
mode switch is in progress, leading to strange & inconsistent
behaviour.
Further to all of this is a separate but related problem:
4) There are various paths through which we may enable the FPU without
the user having triggered a coprocessor 1 disabled exception. These
paths are those in which we emulate instructions & then enable the
FPU with the expectation that the user might execute an FP
instruction shortly afterwards. However these paths have not
previously checked whether an FP mode switch is underway for the
task, and therefore could enable the FPU whilst such a mode switch
is in progress leading to strange & inconsistent behaviour for user
code.
This patch fixes all of the above by taking a step back & re-examining
our approach to FP mode switches. Up until now we have taken these basic
steps:
a) Prevent any threads that are part of the affected process from being
able to obtain ownership of the FPU.
b) Cause any threads that are part of the affected process and already
have ownership of an FPU to lose it.
c) Set the thread flags for each thread that is part of the affected
process to reflect the new FP mode.
d) Allow threads to obtain ownership of the FPU again.
This approach is however more complex than necessary. All that we really
require is that the mode switch has occurred for all threads that are
part of the affected process before mips_set_process_fp_mode(), and thus
the PR_SET_FP_MODE prctl() syscall, returns. This doesn't require that
we stop threads from owning or using an FPU whilst a mode switch occurs,
only that we force them to relinquish it after the mode switch has
occurred such that they next own an FPU with the correct mode
configured. Our basic steps therefore simplify to:
A) Set the thread flags for each thread that is part of the affected
process to reflect the new FP mode.
B) Cause any threads that are part of the affected process and already
have ownership of an FPU to lose it.
We implement B) by forcing each CPU which might be running a thread
which is part of the affected process to schedule a no-op function,
which causes the affected thread to lose its FPU ownership when it is
descheduled.
The end result is simpler FP mode switching with less overhead in the
FPU enable path (ie. enable_restore_fp_context()) and fewer moving
parts.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: 9791554b45 ("MIPS,prctl: add PR_[GS]ET_FP_MODE prctl options for MIPS")
Fixes: 6b8322576e ("MIPS: Force CPUs to lose FP context during mode switches")
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: stable <stable@vger.kernel.org> # v4.0+
The DT core will call of_platform_default_populate, so it is not necessary
for arch specific code to call it unless there are custom match entries,
auxdata or parent device. Neither of those apply here, so remove the call.
Cc: John Crispin <john@phrozen.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Signed-off-by: Rob Herring <robh@kernel.org>
Patchwork: https://patchwork.linux-mips.org/patch/19592/
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-kernel@vger.kernel.org
The DT core will call of_platform_populate, so it is not necessary for
arch specific code to call it unless there are custom match entries,
auxdata or parent device. Neither of those apply here, so remove the call.
Cc: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Signed-off-by: Rob Herring <robh@kernel.org>
Patchwork: https://patchwork.linux-mips.org/patch/19591/
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-kernel@vger.kernel.org
The DT core will register "simple-bus" by default, so it is not necessary
for arch specific code to do so unless there are custom match entries,
auxdata or parent device. Neither of those apply here, so remove the call.
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Signed-off-by: Rob Herring <robh@kernel.org>
Patchwork: https://patchwork.linux-mips.org/patch/19590/
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-kernel@vger.kernel.org
The DT core code will probe "simple-bus" by default, so remove
the Netlogic specific call. The probing of simple-bus happens at
arch_initcall_sync, so the call being removed here is already a nop.
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Signed-off-by: Rob Herring <robh@kernel.org>
Patchwork: https://patchwork.linux-mips.org/patch/19589/
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-kernel@vger.kernel.org
of_platform_bus_probe is deprecated in favor of of_platform_populate.
of_platform_populate is stricter requiring compatible properties for
matching rather than name or type. Octeon uses compatible strings for
matching, so convert it to of_platform_populate.
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Signed-off-by: Rob Herring <robh@kernel.org>
Patchwork: https://patchwork.linux-mips.org/patch/19588/
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-kernel@vger.kernel.org
On SMP systems, the shared ejtag debug buffer may be overwritten by
other cores, because every cores can generate ejtag exception at
same time.
Unfortunately, in that context, it's difficult to relax more registers
to access per cpu buffers. so use ll/sc to serialize the access.
[paul.burton@mips.com:
This could in theory be backported at least as far back as the
beginning of the git era, however in general it's exceedingly rare
that anyone would hit this without further changes, so it doesn't seem
worthwhile marking for backport.]
Signed-off-by: Heiher <r@hev.cc>
Patchwork: https://patchwork.linux-mips.org/patch/19507/
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: jhogan@kernel.org
Cc: ralf@linux-mips.org
Merge the build rule of vmlinux.{gz,bz2,lzma,lzo}.itb, and also move
'targets' close to the related code.
[paul.burton@mips.com:
- Remove leading tabs from assignments to itb_addr_cells, since after
this patch moves the additions to the 'targets' variable the
assignments to itb_addr_cells wound up being treated as part of the
uImage rule above them, causing the .its to incorrectly be generated
with empty ADDR_CELLS.]
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Patchwork: https://patchwork.linux-mips.org/patch/19095/
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: linux-kernel@vger.kernel.org
The build rule of vmlinux.*.its is invoked by $(call if_changed,...)
but it always rebuilds the target needlessly due to missing targets.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Patchwork: https://patchwork.linux-mips.org/patch/19092/
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: linux-kernel@vger.kernel.org
As Documentation/kbuild/makefile.txt says, it is a typical mistake
to forget the FORCE prerequisite for the rule invoked by if_changed.
Add the FORCE to the prerequisite, but it must be filtered-out from
the files passed to the 'cat' command. Because this rule generates
.vmlinux.its.S.cmd, vmlinux.its.S must be specified as targets so
that the .cmd file is included.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Patchwork: https://patchwork.linux-mips.org/patch/19097/
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: linux-kernel@vger.kernel.org
$(CPP) is used here to perform macro replacement in ITS. Do not
pass $(cpp_flags) because it pulls in more options for dependency
file generation etc. but none of which is necessary here. ITS files
do not include any header file, so $(call if_change,...) is enough.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Patchwork: https://patchwork.linux-mips.org/patch/19093/
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: linux-kernel@vger.kernel.org
This reverts commit 0f9da844d8.
It is true that commit 0f9da844d8 ("MIPS: boot: Define __ASSEMBLY__
for its.S build") fixed the build error, but it should not have
defined __ASSEMBLY__ just for textual substitution in arbitrary data.
The file is image tree source in this case, but the purpose of using
CPP is to replace some macros.
I merged a better solution, commit a95b37e20d ("kbuild: get
<linux/compiler_types.h> out of <linux/kconfig.h>"). The original
fix-up is no longer needed.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Patchwork: https://patchwork.linux-mips.org/patch/19096/
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: linux-kernel@vger.kernel.org
Booleans should be assigned true/false not 1/0 as comparison is not needed
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Patchwork: https://patchwork.linux-mips.org/patch/19559/
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: David Daney <david.daney@cavium.com>
Cc: "Steven J. Hill" <Steven.Hill@cavium.com>
Cc: Joe Perches <joe@perches.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Keep this file as light as possible as it gets pulled into every
driver using dma mapping APIs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Patchwork: https://patchwork.linux-mips.org/patch/19552/
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Tom Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-mips@linux-mips.org
Provide phys_to_dma/dma_to_phys helpers, and the special
arch_sync_dma_for_cpu_all hook, everything else is generic
Signed-off-by: Christoph Hellwig <hch@lst.de>
Patchwork: https://patchwork.linux-mips.org/patch/19550/
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Tom Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-mips@linux-mips.org
Jazz actually has a very basic IOMMU, so split the ops into a separate
implementation from the generic default support (which is about to go
away anyway).
Signed-off-by: Christoph Hellwig <hch@lst.de>
Patchwork: https://patchwork.linux-mips.org/patch/19548/
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Tom Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-mips@linux-mips.org
Provide phys_to_dma/dma_to_phys helpers only if PCI support is
enabled, everything else is generic.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Patchwork: https://patchwork.linux-mips.org/patch/19547/
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Tom Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-mips@linux-mips.org
Convert everything not overriding dma-coherence.h to the generic
noncoherent ops. The new dma-noncoherent.c file duplicates a lot of
the code in dma-default.c, but that file will be gone by the end of
this series.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Patchwork: https://patchwork.linux-mips.org/patch/19544/
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Tom Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-mips@linux-mips.org
We want to be able to use it even when not building dma-default.c
in the near future.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Patchwork: https://patchwork.linux-mips.org/patch/19543/
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Tom Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-mips@linux-mips.org
IP27 is coherent and has a reasonably direct mapping, just with a little
per-bus offset added into the dma address.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Patchwork: https://patchwork.linux-mips.org/patch/19542/
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Tom Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-mips@linux-mips.org
Switch the simple cache coherent architectures that don't require any
DMA address translation to dma_direct_ops.
We'll soon use at least parts of the direct DMA ops implementation for
all platforms, so select the symbol globally.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Patchwork: https://patchwork.linux-mips.org/patch/19540/
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Tom Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-mips@linux-mips.org
Loongson3 is dma coherent and uses swiotlb, so it will never used any
of these helpers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Patchwork: https://patchwork.linux-mips.org/patch/19541/
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Tom Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-mips@linux-mips.org
Only loongson-3 is DMA coherent and uses swiotlb. So move the dma
address translations stubs directly to the loongson-3 code, and remove
a few Kconfig indirections.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Patchwork: https://patchwork.linux-mips.org/patch/19539/
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Tom Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-mips@linux-mips.org
No need to pull them into a global header.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Patchwork: https://patchwork.linux-mips.org/patch/19538/
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Tom Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-mips@linux-mips.org
Octeon doesn't use the dma-default code, and now doesn't built it either,
so these stubs can be removed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Patchwork: https://patchwork.linux-mips.org/patch/19537/
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Tom Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-mips@linux-mips.org
Octeon and loonson64 already don't use it at all, and we're going to
migrate more plaforms away from it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Patchwork: https://patchwork.linux-mips.org/patch/19536/
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Tom Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-mips@linux-mips.org
Octeon and Loongson share exactly the same code, move it into a common
implementation, and use that implementation directly from get_arch_dma_ops.
Also provide the expected dma-direct.h helpers directly instead of
delegating to platform dma-coherence.h headers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Patchwork: https://patchwork.linux-mips.org/patch/19534/
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Tom Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-mips@linux-mips.org
swiotlb_dma_supported will always return true for a mask large enough to
cover the DMA addresses for all physical memory, which is the right
thing to do for swiotlb based dma ops. This function returned false
if the mask was bigger than a firmware set dma_mask_bits that apparently
can be either 32 or 64, and which seems completely buggys if it actually
is not 64, as the false return negates the whole point of swiotlb.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Patchwork: https://patchwork.linux-mips.org/patch/19533/
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Tom Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-mips@linux-mips.org
Share a common set of swiotlb operations, and to instead branch out in
__phys_to_dma/__dma_to_phys for the PCI vs non-PCI case. Also use const
structures for the PCI methods so that attackers can't use them as
exploit vectors.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Patchwork: https://patchwork.linux-mips.org/patch/19532/
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Tom Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-mips@linux-mips.org
These functions are just low-level helpers for the swiotlb and dma-direct
implementations, and should never be used by drivers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19531/
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Tom Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-mips@linux-mips.org
We can just check for !CONFIG_DMA_NONCOHERENT instead and simplify things
a lot.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19530/
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Tom Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-mips@linux-mips.org
CONFIG_DMA_MAYBE_COHERENT already selects CONFIG_DMA_NONCOHERENT, so we
can remove the extra conditions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19529/
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Tom Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-mips@linux-mips.org
ath25 is alwas non-coherent, so keeping these ifdefs doesn't make any sense.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19528/
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Tom Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-mips@linux-mips.org
Correct a couple of typos within comments in
arch/mips/kernel/relocate_kernel.S.
[paul.burton@mips.com: Add a commit message.]
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Patchwork: https://patchwork.linux-mips.org/patch/19218/
Signed-off-by: Paul Burton <paul.burton@mips.com>
Use fixed width integer types for ecoff structs to make elf2ecoff work
on 64bit host machines.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Reviewed-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19483/
Signed-off-by: Paul Burton <paul.burton@mips.com>
Many of the inc/dec ops are mandatory, but for most architectures inc/dec are
simply trivial wrappers around their corresponding add/sub ops.
Let's make all the inc/dec ops optional, so that we can get rid of these
boilerplate wrappers.
The instrumented atomics are updated accordingly.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Palmer Dabbelt <palmer@sifive.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/lkml/20180621121321.4761-17-mark.rutland@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Some of the atomics return the result of a test applied after the atomic
operation, and almost all architectures implement these as trivial
wrappers around the underlying atomic. Specifically:
* <atomic>_inc_and_test(v) is (<atomic>_inc_return(v) == 0)
* <atomic>_dec_and_test(v) is (<atomic>_dec_return(v) == 0)
* <atomic>_sub_and_test(i, v) is (<atomic>_sub_return(i, v) == 0)
* <atomic>_add_negative(i, v) is (<atomic>_add_return(i, v) < 0)
Rather than have these definitions duplicated in all architectures, with
minor inconsistencies in formatting and documentation, let's make these
operations optional, with default fallbacks as above. Implementations
must now provide a preprocessor symbol.
The instrumented atomics are updated accordingly.
Both x86 and m68k have custom implementations, which are left as-is,
given preprocessor symbols to avoid being overridden.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Palmer Dabbelt <palmer@sifive.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/lkml/20180621121321.4761-16-mark.rutland@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Architectures with atomic64_fetch_add_unless() provide a preprocessor
symbol if they do so, and all other architectures have trivial C
implementations of atomic64_add_unless() which are near-identical.
Let's unify the trivial definitions of atomic64_fetch_add_unless() in
<linux/atomic.h>, so that we always have both
atomic64_fetch_add_unless() and atomic64_add_unless() with less
boilerplate code.
This means that atomic64_add_unless() is always implemented in core
code, and the instrumented atomics are updated accordingly.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/lkml/20180621121321.4761-15-mark.rutland@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Several architectures these have a near-identical implementation based
on atomic_read() and atomic_cmpxchg() which we can instead define in
<linux/atomic.h>, so let's do so, using something close to the existing
x86 implementation with try_cmpxchg().
Where an architecture provides its own atomic_fetch_add_unless(), it
must define a preprocessor symbol for it. The instrumented atomics are
updated accordingly.
Note that arch/arc's existing atomic_fetch_add_unless() had redundant
barriers, as these are already present in its atomic_cmpxchg()
implementation.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Palmer Dabbelt <palmer@sifive.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vineet Gupta <vgupta@synopsys.com>
Link: https://lore.kernel.org/lkml/20180621121321.4761-7-mark.rutland@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We define a trivial fallback for atomic_inc_not_zero(), but don't do
the same for atomic64_inc_not_zero(), leading most architectures to
define the same boilerplate.
Let's add a fallback in <linux/atomic.h>, and remove the redundant
implementations. Note that atomic64_add_unless() is always defined in
<linux/atomic.h>, and promotes its arguments to the requisite types, so
we need not do this explicitly.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Palmer Dabbelt <palmer@sifive.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/lkml/20180621121321.4761-6-mark.rutland@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
While __atomic_add_unless() was originally intended as a building-block
for atomic_add_unless(), it's now used in a number of places around the
kernel. It's the only common atomic operation named __atomic*(), rather
than atomic_*(), and for consistency it would be better named
atomic_fetch_add_unless().
This lack of consistency is slightly confusing, and gets in the way of
scripting atomics. Given that, let's clean things up and promote it to
an official part of the atomics API, in the form of
atomic_fetch_add_unless().
This patch converts definitions and invocations over to the new name,
including the instrumented version, using the following script:
----
git grep -w __atomic_add_unless | while read line; do
sed -i '{s/\<__atomic_add_unless\>/atomic_fetch_add_unless/}' "${line%%:*}";
done
git grep -w __arch_atomic_add_unless | while read line; do
sed -i '{s/\<__arch_atomic_add_unless\>/arch_atomic_fetch_add_unless/}' "${line%%:*}";
done
----
Note that we do not have atomic{64,_long}_fetch_add_unless(), which will
be introduced by later patches.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Palmer Dabbelt <palmer@sifive.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/lkml/20180621121321.4761-2-mark.rutland@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Clear current_kprobe and enable preemption in kprobe
even if pre_handler returns !0.
This simplifies function override using kprobes.
Jprobe used to require to keep the preemption disabled and
keep current_kprobe until it returned to original function
entry. For this reason kprobe_int3_handler() and similar
arch dependent kprobe handers checks pre_handler result
and exit without enabling preemption if the result is !0.
After removing the jprobe, Kprobes does not need to
keep preempt disabled even if user handler returns !0
anymore.
But since the function override handler in error-inject
and bpf is also returns !0 if it overrides a function,
to balancing the preempt count, it enables preemption
and reset current kprobe by itself.
That is a bad design that is very buggy. This fixes
such unbalanced preempt-count and current_kprobes setting
in kprobes, bpf and error-inject.
Note: for powerpc and x86, this removes all preempt_disable
from kprobe_ftrace_handler because ftrace callbacks are
called under preempt disabled.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: linux-arch@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-ia64@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-s390@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: linux-snps-arc@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: sparclinux@vger.kernel.org
Link: https://lore.kernel.org/lkml/152942494574.15209.12323837825873032258.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Don't call the ->break_handler() from the MIPS kprobes code,
because it was only used by jprobes which got removed.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-arch@vger.kernel.org
Cc: linux-mips@linux-mips.org
Link: https://lore.kernel.org/lkml/152942482953.15209.843924518200700137.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Wire up the io_pgetevents syscall that was introduced by commit
7a074e96de ("aio: implement io_pgetevents").
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19593/
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Wire up the restartable sequences (rseq) syscall for MIPS. This was
introduced by commit d7822b1e24 ("rseq: Introduce restartable
sequences system call") & MIPS now supports the prerequisites.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Reviewed-by: James Hogan <jhogan@kernel.org>
Patchwork: https://patchwork.linux-mips.org/patch/19525/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Syscalls are not allowed inside restartable sequences, so add a call to
rseq_syscall() at the very beginning of the system call exit path when
CONFIG_DEBUG_RSEQ=y. This will help us to detect whether there is a
syscall issued erroneously inside a restartable sequence.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Reviewed-by: James Hogan <jhogan@kernel.org>
Patchwork: https://patchwork.linux-mips.org/patch/19522/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Implement support for restartable sequences on MIPS, which requires 3
simple things:
- Call rseq_handle_notify_resume() on return to userspace if
TIF_NOTIFY_RESUME is set.
- Call rseq_signal_deliver() to fixup the pre-signal stack frame when
a signal is delivered whilst executing a restartable sequence
critical section.
- Select CONFIG_HAVE_RSEQ.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Reviewed-by: James Hogan <jhogan@kernel.org>
Patchwork: https://patchwork.linux-mips.org/patch/19523/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
While a barrier is present in the outX() functions before the register
write, a similar barrier is missing in the inX() functions after the
register read. This could allow memory accesses following inX() to
observe stale data.
This patch is very similar to commit a1cc7034e3 ("MIPS: io: Add
barrier after register read in readX()"). Because war_io_reorder_wmb()
is both used by writeX() and outX(), if readX() need a barrier then so
does inX().
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Patchwork: https://patchwork.linux-mips.org/patch/19516/
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <james.hogan@mips.com>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: Huacai Chen <chenhuacai@gmail.com>
ftrace_graph_caller was never run after calling ftrace_trace_function,
breaking the function graph tracer. Fix this, bringing it in line with the
x86 implementation.
While we're at it, also streamline the control flow of _mcount a bit to
reduce the number of branches.
This issue was reported before:
https://www.linux-mips.org/archives/linux-mips/2014-11/msg00295.html
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Tested-by: Matt Redfearn <matt.redfearn@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/18929/
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: stable@vger.kernel.org # v3.17+
The erratum and workaround are described by BCM5300X-ES300-RDS.pdf as
below.
R10: PCIe Transactions Periodically Fail
Description: The BCM5300X PCIe does not maintain transaction ordering.
This may cause PCIe transaction failure.
Fix Comment: Add a dummy PCIe configuration read after a PCIe
configuration write to ensure PCIe configuration access
ordering. Set ES bit of CP0 configu7 register to enable
sync function so that the sync instruction is functional.
Resolution: hndpci.c: extpci_write_config()
hndmips.c: si_mips_init()
mipsinc.h CONF7_ES
This is fixed by the CFE MIPS bcmsi chipset driver also for BCM47XX.
Also the dummy PCIe configuration read is already implemented in the
Linux BCMA driver.
Enable ExternalSync in Config7 when CONFIG_BCMA_DRIVER_PCI_HOSTMODE=y
too so that the sync instruction is externalised.
Signed-off-by: Tokunori Ikegami <ikegami@allied-telesis.co.jp>
Reviewed-by: Paul Burton <paul.burton@mips.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: Rafał Miłecki <zajec5@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/19461/
Signed-off-by: James Hogan <jhogan@kernel.org>
I used bad names in my clumsiness when rewriting many board
files to use GPIO descriptors instead of platform data. A few
had the platform_device ID set to -1 which would indeed give
the device name "i2c-gpio".
But several had it set to >=0 which gives the names
"i2c-gpio.0", "i2c-gpio.1" ...
Fix the one affected board in the MIPS tree. Sorry.
Fixes: b2e6355559 ("i2c: gpio: Convert to use descriptors")
Reported-by: Simon Guinot <simon.guinot@sequanux.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: Simon Guinot <simon.guinot@sequanux.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.15+
Patchwork: https://patchwork.linux-mips.org/patch/19387/
Signed-off-by: James Hogan <jhogan@kernel.org>
Merge more updates from Andrew Morton:
- MM remainders
- various misc things
- kcov updates
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (27 commits)
lib/test_printf.c: call wait_for_random_bytes() before plain %p tests
hexagon: drop the unused variable zero_page_mask
hexagon: fix printk format warning in setup.c
mm: fix oom_kill event handling
treewide: use PHYS_ADDR_MAX to avoid type casting ULLONG_MAX
mm: use octal not symbolic permissions
ipc: use new return type vm_fault_t
sysvipc/sem: mitigate semnum index against spectre v1
fault-injection: reorder config entries
arm: port KCOV to arm
sched/core / kcov: avoid kcov_area during task switch
kcov: prefault the kcov_area
kcov: ensure irq code sees a valid area
kernel/relay.c: change return type to vm_fault_t
exofs: avoid VLA in structures
coredump: fix spam with zero VMA process
fat: use fat_fs_error() instead of BUG_ON() in __fat_get_block()
proc: skip branch in /proc/*/* lookup
mremap: remove LATENCY_LIMIT from mremap to reduce the number of TLB shootdowns
mm/memblock: add missing include <linux/bootmem.h>
...
With PHYS_ADDR_MAX there is now a type safe variant for all bits set.
Make use of it.
Patch created using a semantic patch as follows:
// <smpl>
@@
typedef phys_addr_t;
@@
-(phys_addr_t)ULLONG_MAX
+PHYS_ADDR_MAX
// </smpl>
Link: http://lkml.kernel.org/r/20180419214204.19322-1-stefan@agner.ch
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
HAVE_CC_STACKPROTECTOR should be selected by architectures with stack
canary implementation. It is not about the compiler support.
For the consistency with commit 050e9baa9d ("Kbuild: rename
CC_STACKPROTECTOR[_STRONG] config variables"), remove 'CC_' from the
config symbol.
I moved the 'select' lines to keep the alphabetical sorting.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull i2c updates from Wolfram Sang:
- mainly feature additions to drivers (stm32f7, qup, xlp9xx, mlxcpld, ...)
- conversion to use the i2c_8bit_addr_from_msg macro consistently
- move includes to platform_data
- core updates to allow the (still in review) I3C subsystem to connect
- and the regular share of smaller driver updates
* 'i2c/for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (68 commits)
i2c: qup: fix building without CONFIG_ACPI
i2c: tegra: Remove suspend-resume
i2c: imx-lpi2c: Switch to SPDX identifier
i2c: mxs: Switch to SPDX identifier
i2c: busses: make use of i2c_8bit_addr_from_msg
i2c: algos: make use of i2c_8bit_addr_from_msg
i2c: rcar: document R8A77980 bindings
i2c: qup: Add command-line parameter to override SCL frequency
i2c: qup: Correct duty cycle for FM and FM+
i2c: qup: Add support for Fast Mode Plus
i2c: qup: add probe path for Centriq ACPI devices
i2c: robotfuzz-osif: drop pointless test
i2c: robotfuzz-osif: remove pointless local variable
i2c: rk3x: Don't print visible virtual mapping MMIO address
i2c: opal: don't check number of messages in the driver
i2c: ibm_iic: don't check number of messages in the driver
i2c: imx: Switch to SPDX identifier
i2c: mux: pca954x: merge calls to of_match_device and of_device_get_match_data
i2c: mux: demux-pinctrl: use proper parent device for demux adapter
i2c: mux: improve error message for failed symlink
...
The changes to automatically test for working stack protector compiler
support in the Kconfig files removed the special STACKPROTECTOR_AUTO
option that picked the strongest stack protector that the compiler
supported.
That was all a nice cleanup - it makes no sense to have the AUTO case
now that the Kconfig phase can just determine the compiler support
directly.
HOWEVER.
It also meant that doing "make oldconfig" would now _disable_ the strong
stackprotector if you had AUTO enabled, because in a legacy config file,
the sane stack protector configuration would look like
CONFIG_HAVE_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR_NONE is not set
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_CC_STACKPROTECTOR_AUTO=y
and when you ran this through "make oldconfig" with the Kbuild changes,
it would ask you about the regular CONFIG_CC_STACKPROTECTOR (that had
been renamed from CONFIG_CC_STACKPROTECTOR_REGULAR to just
CONFIG_CC_STACKPROTECTOR), but it would think that the STRONG version
used to be disabled (because it was really enabled by AUTO), and would
disable it in the new config, resulting in:
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y
That's dangerously subtle - people could suddenly find themselves with
the weaker stack protector setup without even realizing.
The solution here is to just rename not just the old RECULAR stack
protector option, but also the strong one. This does that by just
removing the CC_ prefix entirely for the user choices, because it really
is not about the compiler support (the compiler support now instead
automatially impacts _visibility_ of the options to users).
This results in "make oldconfig" actually asking the user for their
choice, so that we don't have any silent subtle security model changes.
The end result would generally look like this:
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=y
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y
where the "CC_" versions really are about internal compiler
infrastructure, not the user selections.
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Additional struct_size() conversions (Matthew, Kees)
- Explicitly reported overflow fixes (Silvio, Kees)
- Add missing kvcalloc() function (Kees)
- Treewide conversions of allocators to use either 2-factor argument
variant when available, or array_size() and array3_size() as needed (Kees)
-----BEGIN PGP SIGNATURE-----
Comment: Kees Cook <kees@outflux.net>
iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAlsgVtMWHGtlZXNjb29r
QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJhsJEACLYe2EbwLFJz7emOT1KUGK5R1b
oVxJog0893WyMqgk9XBlA2lvTBRBYzR3tzsadfYo87L3VOBzazUv0YZaweJb65sF
bAvxW3nY06brhKKwTRed1PrMa1iG9R63WISnNAuZAq7+79mN6YgW4G6YSAEF9lW7
oPJoPw93YxcI8JcG+dA8BC9w7pJFKooZH4gvLUSUNl5XKr8Ru5YnWcV8F+8M4vZI
EJtXFmdlmxAledUPxTSCIojO8m/tNOjYTreBJt9K1DXKY6UcgAdhk75TRLEsp38P
fPvMigYQpBDnYz2pi9ourTgvZLkffK1OBZ46PPt8BgUZVf70D6CBg10vK47KO6N2
zreloxkMTrz5XohyjfNjYFRkyyuwV2sSVrRJqF4dpyJ4NJQRjvyywxIP4Myifwlb
ONipCM1EjvQjaEUbdcqKgvlooMdhcyxfshqJWjHzXB6BL22uPzq5jHXXugz8/ol8
tOSM2FuJ2sBLQso+szhisxtMd11PihzIZK9BfxEG3du+/hlI+2XgN7hnmlXuA2k3
BUW6BSDhab41HNd6pp50bDJnL0uKPWyFC6hqSNZw+GOIb46jfFcQqnCB3VZGCwj3
LH53Be1XlUrttc/NrtkvVhm4bdxtfsp4F7nsPFNDuHvYNkalAVoC3An0BzOibtkh
AtfvEeaPHaOyD8/h2Q==
=zUUp
-----END PGP SIGNATURE-----
Merge tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull more overflow updates from Kees Cook:
"The rest of the overflow changes for v4.18-rc1.
This includes the explicit overflow fixes from Silvio, further
struct_size() conversions from Matthew, and a bug fix from Dan.
But the bulk of it is the treewide conversions to use either the
2-factor argument allocators (e.g. kmalloc(a * b, ...) into
kmalloc_array(a, b, ...) or the array_size() macros (e.g. vmalloc(a *
b) into vmalloc(array_size(a, b)).
Coccinelle was fighting me on several fronts, so I've done a bunch of
manual whitespace updates in the patches as well.
Summary:
- Error path bug fix for overflow tests (Dan)
- Additional struct_size() conversions (Matthew, Kees)
- Explicitly reported overflow fixes (Silvio, Kees)
- Add missing kvcalloc() function (Kees)
- Treewide conversions of allocators to use either 2-factor argument
variant when available, or array_size() and array3_size() as needed
(Kees)"
* tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (26 commits)
treewide: Use array_size in f2fs_kvzalloc()
treewide: Use array_size() in f2fs_kzalloc()
treewide: Use array_size() in f2fs_kmalloc()
treewide: Use array_size() in sock_kmalloc()
treewide: Use array_size() in kvzalloc_node()
treewide: Use array_size() in vzalloc_node()
treewide: Use array_size() in vzalloc()
treewide: Use array_size() in vmalloc()
treewide: devm_kzalloc() -> devm_kcalloc()
treewide: devm_kmalloc() -> devm_kmalloc_array()
treewide: kvzalloc() -> kvcalloc()
treewide: kvmalloc() -> kvmalloc_array()
treewide: kzalloc_node() -> kcalloc_node()
treewide: kzalloc() -> kcalloc()
treewide: kmalloc() -> kmalloc_array()
mm: Introduce kvcalloc()
video: uvesafb: Fix integer overflow in allocation
UBIFS: Fix potential integer overflow in allocation
leds: Use struct_size() in allocation
Convert intel uncore to struct_size
...
* ARM: lazy context-switching of FPSIMD registers on arm64, "split"
regions for vGIC redistributor
* s390: cleanups for nested, clock handling, crypto, storage keys and
control register bits
* x86: many bugfixes, implement more Hyper-V super powers,
implement lapic_timer_advance_ns even when the LAPIC timer
is emulated using the processor's VMX preemption timer. Two
security-related bugfixes at the top of the branch.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJbH8Z/AAoJEL/70l94x66DF+UIAJeOuTp6LGasT/9uAb2OovaN
+5kGmOPGFwkTcmg8BQHI2fXT4vhxMXWPFcQnyig9eXJVxhuwluXDOH4P9IMay0yw
VDCBsWRdMvZDQad2hn6Z5zR4Jx01XrSaG/KqvXbbDKDCy96mWG7SYAY2m3ZwmeQi
3Pa3O3BTijr7hBYnMhdXGkSn4ZyU8uPaAgIJ8795YKeOJ2JmioGYk6fj6y2WCxA3
ztJymBjTmIoZ/F8bjuVouIyP64xH4q9roAyw4rpu7vnbWGqx1fjPYJoB8yddluWF
JqCPsPzhKDO7mjZJy+lfaxIlzz2BN7tKBNCm88s5GefGXgZwk3ByAq/0GQ2M3rk=
=H5zI
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"Small update for KVM:
ARM:
- lazy context-switching of FPSIMD registers on arm64
- "split" regions for vGIC redistributor
s390:
- cleanups for nested
- clock handling
- crypto
- storage keys
- control register bits
x86:
- many bugfixes
- implement more Hyper-V super powers
- implement lapic_timer_advance_ns even when the LAPIC timer is
emulated using the processor's VMX preemption timer.
- two security-related bugfixes at the top of the branch"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (79 commits)
kvm: fix typo in flag name
kvm: x86: use correct privilege level for sgdt/sidt/fxsave/fxrstor access
KVM: x86: pass kvm_vcpu to kvm_read_guest_virt and kvm_write_guest_virt_system
KVM: x86: introduce linear_{read,write}_system
kvm: nVMX: Enforce cpl=0 for VMX instructions
kvm: nVMX: Add support for "VMWRITE to any supported field"
kvm: nVMX: Restrict VMX capability MSR changes
KVM: VMX: Optimize tscdeadline timer latency
KVM: docs: nVMX: Remove known limitations as they do not exist now
KVM: docs: mmu: KVM support exposing SLAT to guests
kvm: no need to check return value of debugfs_create functions
kvm: Make VM ioctl do valloc for some archs
kvm: Change return type to vm_fault_t
KVM: docs: mmu: Fix link to NPT presentation from KVM Forum 2008
kvm: x86: Amend the KVM_GET_SUPPORTED_CPUID API documentation
KVM: x86: hyperv: declare KVM_CAP_HYPERV_TLBFLUSH capability
KVM: x86: hyperv: simplistic HVCALL_FLUSH_VIRTUAL_ADDRESS_{LIST,SPACE}_EX implementation
KVM: x86: hyperv: simplistic HVCALL_FLUSH_VIRTUAL_ADDRESS_{LIST,SPACE} implementation
KVM: introduce kvm_make_vcpus_request_mask() API
KVM: x86: hyperv: do rep check for each hypercall separately
...
-----BEGIN PGP SIGNATURE-----
iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAlsZdg0UHGJoZWxnYWFz
QGdvb2dsZS5jb20ACgkQWYigwDrT+vwJOBAAsuuWsOdiJRRhQLU5WfEMFgzcL02R
gsumqZkK7E8LOq0DPNMtcgv9O0KgYZyCiZyTMJ8N7sEYohg04lMz8mtYXOibjcwI
p+nVMko8jQXV9FXwSMGVqigEaLLcrbtkbf/mPriD63DDnRMa/+/Jh15SwfLTydIH
QRTJbIxkS3EiOauj5C8QY3UwzjlvV9mDilzM/x+MSK27k2HFU9Pw/3lIWHY716rr
grPZTwBTfIT+QFZjwOm6iKzHjxRM830sofXARkcH4CgSNaTeq5UbtvAs293MHvc+
v/v/1dfzUh00NxfZDWKHvTUMhjazeTeD9jEVS7T+HUcGzvwGxMSml6bBdznvwKCa
46ynePOd1VcEBlMYYS+P4njRYBLWeUwt6/TzqR4yVwb0keQ6Yj3Y9H2UpzscYiCl
O+0qz6RwyjKY0TpxfjoojgHn4U5ByI5fzVDJHbfr2MFTqqRNaabVrfl6xU4sVuhh
OluT5ym+/dOCTI/wjlolnKNb0XThVre8e2Busr3TRvuwTMKMIWqJ9sXLovntdbqE
furPD/UnuZHkjSFhQ1SQwYdWmsZI5qAq2C9haY8sEWsXEBEcBGLJ2BEleMxm8UsL
KXuy4ER+R4M+sFtCkoWf3D4NTOBUdPHi4jyk6Ooo1idOwXCsASVvUjUEG5YcQC6R
kpJ1VPTKK1XN64I=
=aFAi
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
- unify AER decoding for native and ACPI CPER sources (Alexandru
Gagniuc)
- add TLP header info to AER tracepoint (Thomas Tai)
- add generic pcie_wait_for_link() interface (Oza Pawandeep)
- handle AER ERR_FATAL by removing and re-enumerating devices, as
Downstream Port Containment does (Oza Pawandeep)
- factor out common code between AER and DPC recovery (Oza Pawandeep)
- stop triggering DPC for ERR_NONFATAL errors (Oza Pawandeep)
- share ERR_FATAL recovery path between AER and DPC (Oza Pawandeep)
- disable ASPM L1.2 substate if we don't have LTR (Bjorn Helgaas)
- respect platform ownership of LTR (Bjorn Helgaas)
- clear interrupt status in top half to avoid interrupt storm (Oza
Pawandeep)
- neaten pci=earlydump output (Andy Shevchenko)
- avoid errors when extended config space inaccessible (Gilles Buloz)
- prevent sysfs disable of device while driver attached (Christoph
Hellwig)
- use core interface to report PCIe link properties in bnx2x, bnxt_en,
cxgb4, ixgbe (Bjorn Helgaas)
- remove unused pcie_get_minimum_link() (Bjorn Helgaas)
- fix use-before-set error in ibmphp (Dan Carpenter)
- fix pciehp timeouts caused by Command Completed errata (Bjorn
Helgaas)
- fix refcounting in pnv_php hotplug (Julia Lawall)
- clear pciehp Presence Detect and Data Link Layer Status Changed on
resume so we don't miss hotplug events (Mika Westerberg)
- only request pciehp control if we support it, so platform can use
ACPI hotplug otherwise (Mika Westerberg)
- convert SHPC to be builtin only (Mika Westerberg)
- request SHPC control via _OSC if we support it (Mika Westerberg)
- simplify SHPC handoff from firmware (Mika Westerberg)
- fix an SHPC quirk that mistakenly included *all* AMD bridges as well
as devices from any vendor with device ID 0x7458 (Bjorn Helgaas)
- assign a bus number even to non-native hotplug bridges to leave
space for acpiphp additions, to fix a common Thunderbolt xHCI
hot-add failure (Mika Westerberg)
- keep acpiphp from scanning native hotplug bridges, to fix common
Thunderbolt hot-add failures (Mika Westerberg)
- improve "partially hidden behind bridge" messages from core (Mika
Westerberg)
- add macros for PCIe Link Control 2 register (Frederick Lawler)
- replace IB/hfi1 custom macros with PCI core versions (Frederick
Lawler)
- remove dead microblaze and xtensa code (Bjorn Helgaas)
- use dev_printk() when possible in xtensa and mips (Bjorn Helgaas)
- remove unused pcie_port_acpi_setup() and portdrv_acpi.c (Bjorn
Helgaas)
- add managed interface to get PCI host bridge resources from OF (Jan
Kiszka)
- add support for unbinding generic PCI host controller (Jan Kiszka)
- fix memory leaks when unbinding generic PCI host controller (Jan
Kiszka)
- request legacy VGA framebuffer only for VGA devices to avoid false
device conflicts (Bjorn Helgaas)
- turn on PCI_COMMAND_IO & PCI_COMMAND_MEMORY in pci_enable_device()
like everybody else, not in pcibios_fixup_bus() (Bjorn Helgaas)
- add generic enable function for simple SR-IOV hardware (Alexander
Duyck)
- use generic SR-IOV enable for ena, nvme (Alexander Duyck)
- add ACS quirk for Intel 7th & 8th Gen mobile (Alex Williamson)
- add ACS quirk for Intel 300 series (Mika Westerberg)
- enable register clock for Armada 7K/8K (Gregory CLEMENT)
- reduce Keystone "link already up" log level (Fabio Estevam)
- move private DT functions to drivers/pci/ (Rob Herring)
- factor out dwc CONFIG_PCI Kconfig dependencies (Rob Herring)
- add DesignWare support to the endpoint test driver (Gustavo
Pimentel)
- add DesignWare support for endpoint mode (Gustavo Pimentel)
- use devm_ioremap_resource() instead of devm_ioremap() in dra7xx and
artpec6 (Gustavo Pimentel)
- fix Qualcomm bitwise NOT issue (Dan Carpenter)
- add Qualcomm runtime PM support (Srinivas Kandagatla)
- fix DesignWare enumeration below bridges (Koen Vandeputte)
- use usleep() instead of mdelay() in endpoint test (Jia-Ju Bai)
- add configfs entries for pci_epf_driver device IDs (Kishon Vijay
Abraham I)
- clean up pci_endpoint_test driver (Gustavo Pimentel)
- update Layerscape maintainer email addresses (Minghuan Lian)
- add COMPILE_TEST to improve build test coverage (Rob Herring)
- fix Hyper-V bus registration failure caused by domain/serial number
confusion (Sridhar Pitchai)
- improve Hyper-V refcounting and coding style (Stephen Hemminger)
- avoid potential Hyper-V hang waiting for a response that will never
come (Dexuan Cui)
- implement Mediatek chained IRQ handling (Honghui Zhang)
- fix vendor ID & class type for Mediatek MT7622 (Honghui Zhang)
- add Mobiveil PCIe host controller driver (Subrahmanya Lingappa)
- add Mobiveil MSI support (Subrahmanya Lingappa)
- clean up clocks, MSI, IRQ mappings in R-Car probe failure paths
(Marek Vasut)
- poll more frequently (5us vs 5ms) while waiting for R-Car data link
active (Marek Vasut)
- use generic OF parsing interface in R-Car (Vladimir Zapolskiy)
- add R-Car V3H (R8A77980) "compatible" string (Sergei Shtylyov)
- add R-Car gen3 PHY support (Sergei Shtylyov)
- improve R-Car PHYRDY polling (Sergei Shtylyov)
- clean up R-Car macros (Marek Vasut)
- use runtime PM for R-Car controller clock (Dien Pham)
- update arm64 defconfig for Rockchip (Shawn Lin)
- refactor Rockchip code to facilitate both root port and endpoint
mode (Shawn Lin)
- add Rockchip endpoint mode driver (Shawn Lin)
- support VMD "membar shadow" feature (Jon Derrick)
- support VMD bus number offsets (Jon Derrick)
- add VMD "no AER source ID" quirk for more device IDs (Jon Derrick)
- remove unnecessary host controller CONFIG_PCIEPORTBUS Kconfig
selections (Bjorn Helgaas)
- clean up quirks.c organization and whitespace (Bjorn Helgaas)
* tag 'pci-v4.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (144 commits)
PCI/AER: Replace struct pcie_device with pci_dev
PCI/AER: Remove unused parameters
PCI: qcom: Include gpio/consumer.h
PCI: Improve "partially hidden behind bridge" log message
PCI: Improve pci_scan_bridge() and pci_scan_bridge_extend() doc
PCI: Move resource distribution for single bridge outside loop
PCI: Account for all bridges on bus when distributing bus numbers
ACPI / hotplug / PCI: Drop unnecessary parentheses
ACPI / hotplug / PCI: Mark stale PCI devices disconnected
ACPI / hotplug / PCI: Don't scan bridges managed by native hotplug
PCI: hotplug: Add hotplug_is_native()
PCI: shpchp: Add shpchp_is_native()
PCI: shpchp: Fix AMD POGO identification
PCI: mobiveil: Add MSI support
PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver
PCI/AER: Decode Error Source Requester ID
PCI/AER: Remove aer_recover_work_func() forward declaration
PCI/DPC: Use the generic pcie_do_fatal_recovery() path
PCI/AER: Pass service type to pcie_do_fatal_recovery()
PCI/DPC: Disable ERR_NONFATAL handling by DPC
...
Pull networking updates from David Miller:
1) Add Maglev hashing scheduler to IPVS, from Inju Song.
2) Lots of new TC subsystem tests from Roman Mashak.
3) Add TCP zero copy receive and fix delayed acks and autotuning with
SO_RCVLOWAT, from Eric Dumazet.
4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard
Brouer.
5) Add ttl inherit support to vxlan, from Hangbin Liu.
6) Properly separate ipv6 routes into their logically independant
components. fib6_info for the routing table, and fib6_nh for sets of
nexthops, which thus can be shared. From David Ahern.
7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP
messages from XDP programs. From Nikita V. Shirokov.
8) Lots of long overdue cleanups to the r8169 driver, from Heiner
Kallweit.
9) Add BTF ("BPF Type Format"), from Martin KaFai Lau.
10) Add traffic condition monitoring to iwlwifi, from Luca Coelho.
11) Plumb extack down into fib_rules, from Roopa Prabhu.
12) Add Flower classifier offload support to igb, from Vinicius Costa
Gomes.
13) Add UDP GSO support, from Willem de Bruijn.
14) Add documentation for eBPF helpers, from Quentin Monnet.
15) Add TLS tx offload to mlx5, from Ilya Lesokhin.
16) Allow applications to be given the number of bytes available to read
on a socket via a control message returned from recvmsg(), from
Soheil Hassas Yeganeh.
17) Add x86_32 eBPF JIT compiler, from Wang YanQing.
18) Add AF_XDP sockets, with zerocopy support infrastructure as well.
From Björn Töpel.
19) Remove indirect load support from all of the BPF JITs and handle
these operations in the verifier by translating them into native BPF
instead. From Daniel Borkmann.
20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha.
21) Allow XDP programs to do lookups in the main kernel routing tables
for forwarding. From David Ahern.
22) Allow drivers to store hardware state into an ELF section of kernel
dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy.
23) Various RACK and loss detection improvements in TCP, from Yuchung
Cheng.
24) Add TCP SACK compression, from Eric Dumazet.
25) Add User Mode Helper support and basic bpfilter infrastructure, from
Alexei Starovoitov.
26) Support ports and protocol values in RTM_GETROUTE, from Roopa
Prabhu.
27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard
Brouer.
28) Add lots of forwarding selftests, from Petr Machata.
29) Add generic network device failover driver, from Sridhar Samudrala.
* ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits)
strparser: Add __strp_unpause and use it in ktls.
rxrpc: Fix terminal retransmission connection ID to include the channel
net: hns3: Optimize PF CMDQ interrupt switching process
net: hns3: Fix for VF mailbox receiving unknown message
net: hns3: Fix for VF mailbox cannot receiving PF response
bnx2x: use the right constant
Revert "net: sched: cls: Fix offloading when ingress dev is vxlan"
net: dsa: b53: Fix for brcm tag issue in Cygnus SoC
enic: fix UDP rss bits
netdev-FAQ: clarify DaveM's position for stable backports
rtnetlink: validate attributes in do_setlink()
mlxsw: Add extack messages for port_{un, }split failures
netdevsim: Add extack error message for devlink reload
devlink: Add extack to reload and port_{un, }split operations
net: metrics: add proper netlink validation
ipmr: fix error path when ipmr_new_table fails
ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds
net: hns3: remove unused hclgevf_cfg_func_mta_filter
netfilter: provide udp*_lib_lookup for nf_tproxy
qed*: Utilize FW 8.37.2.0
...
- improve fixdep to coalesce consecutive slashes in dep-files
- fix some issues of the maintainer string generation in deb-pkg script
- remove unused CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX and clean-up
several tools and linker scripts
- clean-up modpost
- allow to enable the dead code/data elimination for PowerPC in EXPERT mode
- improve two coccinelle scripts for better performance
- pass endianness and machine size flags to sparse for all architecture
- misc fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJbF/yvAAoJED2LAQed4NsGEPgP/2qBg7w4raGvQtblqGY1qo6j
3xGKYUKdg3GhIRf1zB9lPwkAmQcyLKzKlet/gYoTUTLKbfRUX8wDzJf/3TV0kpLW
QQ2HM1/jsqrD1HSO21OPJ1rzMSNn1NcOSLWSeOLWUBorHkkvAHlenJcJSOo6szJr
tTgEN78T/9id/artkFqdG+1Q3JhnI5FfH3u0lE20Eqxk5AAxrUKArHYsgRjgOg9o
8DlHDTRsnTiUd4TtmC+VYSZK1BHz1ORlANaRiL69T+BGFZGNCvRSV09QkaD+ObxT
dB4TTJne32Qg6g5qYX0bzLqfRdfJ8tpmJGQkycf3OT1rLgmDbWFaaOEDQTAe3mSw
nT6ZbpQB1OoTgMD2An9ApWfUQRfsMnujm/pRP+BkRdKKkMJvXJCH7PvFw8rjqTt3
PjK6DGbpG6H0G+DePtthMHrz/TU6wi5MFf7kQxl0AtFmpa3R0q67VhdM04BEYNCq
Dbs1YaXWKKi101k14oSQ0kmRasZ9Jz5tvyfZ7wvy1LpGONXxtEbc6JQyBJ6tmf4f
fCAxvHLSb/TQSmJhk9Rch7uPYT9B9hC16dseMrF9Pab8yR346fz70L1UdFE10j3q
iKFbYkueq8uJCJDxNktsgHzbOF6Le5vaWauOafRN26K7p7+CRpVOy0O2bknX3yDa
hKOGzCfQjT8sfdMmtyIH
=2LYT
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- improve fixdep to coalesce consecutive slashes in dep-files
- fix some issues of the maintainer string generation in deb-pkg script
- remove unused CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX and clean-up
several tools and linker scripts
- clean-up modpost
- allow to enable the dead code/data elimination for PowerPC in EXPERT
mode
- improve two coccinelle scripts for better performance
- pass endianness and machine size flags to sparse for all architecture
- misc fixes
* tag 'kbuild-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits)
kbuild: add machine size to CHECKFLAGS
kbuild: add endianness flag to CHEKCFLAGS
kbuild: $(CHECK) doesnt need NOSTDINC_FLAGS twice
scripts: Fixed printf format mismatch
scripts/tags.sh: use `find` for $ALLSOURCE_ARCHS generation
coccinelle: deref_null: improve performance
coccinelle: mini_lock: improve performance
powerpc: Allow LD_DEAD_CODE_DATA_ELIMINATION to be selected
kbuild: Allow LD_DEAD_CODE_DATA_ELIMINATION to be selectable if enabled
kbuild: LD_DEAD_CODE_DATA_ELIMINATION no -ffunction-sections/-fdata-sections for module build
kbuild: Fix asm-generic/vmlinux.lds.h for LD_DEAD_CODE_DATA_ELIMINATION
modpost: constify *modname function argument where possible
modpost: remove redundant is_vmlinux() test
modpost: use strstarts() helper more widely
modpost: pass struct elf_info pointer to get_modinfo()
checkpatch: remove VMLINUX_SYMBOL() check
vmlinux.lds.h: remove no-op macro VMLINUX_SYMBOL()
kbuild: remove CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX
export.h: remove code for prefixing symbols with underscore
depmod.sh: remove symbol prefix support
...
- Decrease polling rate for erase/trim/discard
- Allow non-sleeping GPIOs for card detect
- Improve mmc block removal path
- Enable support for mmc_sw_reset() for SDIO cards
- Add mmc_sw_reset() to allow users to do a soft reset of the card
- Allow power delay to be tunable via DT
- Allow card detect debounce delay to be tunable via DT
- Enable new quirk to limit clock rate for Marvell 8887 chip
- Don't show eMMC RPMB and BOOT areas in /proc/partitions
- Add capability to avoid 3.3V signaling for fragile HWs
MMC host:
- Improve/fixup support for handle highmem pages
- Remove depends on HAS_DMA in case of platform dependency
- mvsdio: Enable support for erase/trim/discard
- rtsx_usb: Enable support for erase/trim/discard
- renesas_sdhi: Fix WP logic regressions
- renesas_sdhi: Add r8a77965 support
- renesas_sdhi: Add R8A77980 to whitelist
- meson: Add optional support for device reset
- meson: Add support for the Meson-AXG platform
- dw_mmc: Add new driver for BlueField DW variant
- mediatek: Add support for 64G DRAM DMA
- sunxi: Deploy runtime PM support
- jz4740: Add support for JZ4780
- jz4740: Enable support for DT based platforms
- sdhci: Various improvement to timeout handling
- sdhci: Disable support for HS200/HS400/UHS when no 1.8V support
- sdhci-omap: Add support for controller in k2g SoC
- sdhci-omap: Add workarounds for a couple of Erratas
- sdhci-omap: Enable support for generic sdhci DT properties
- sdhci-cadence: Re-send tune request to deal with errata
- sdhci-pci: Fix 3.3V voltage switch for some BYT-based Intel controllers
- sdhci-pci: Avoid 3.3V signaling on some NI 904x
- sdhci-esdhc-imx: Use watermark levels for PIO access
- sdhci-msm: Improve card detection handling
- sdhci-msm: Add support voltage pad switching
-----BEGIN PGP SIGNATURE-----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=MwCT
-----END PGP SIGNATURE-----
Merge tag 'mmc-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Decrease polling rate for erase/trim/discard
- Allow non-sleeping GPIOs for card detect
- Improve mmc block removal path
- Enable support for mmc_sw_reset() for SDIO cards
- Add mmc_sw_reset() to allow users to do a soft reset of the card
- Allow power delay to be tunable via DT
- Allow card detect debounce delay to be tunable via DT
- Enable new quirk to limit clock rate for Marvell 8887 chip
- Don't show eMMC RPMB and BOOT areas in /proc/partitions
- Add capability to avoid 3.3V signaling for fragile HWs
MMC host:
- Improve/fixup support for handle highmem pages
- Remove depends on HAS_DMA in case of platform dependency
- mvsdio: Enable support for erase/trim/discard
- rtsx_usb: Enable support for erase/trim/discard
- renesas_sdhi: Fix WP logic regressions
- renesas_sdhi: Add r8a77965 support
- renesas_sdhi: Add R8A77980 to whitelist
- meson: Add optional support for device reset
- meson: Add support for the Meson-AXG platform
- dw_mmc: Add new driver for BlueField DW variant
- mediatek: Add support for 64G DRAM DMA
- sunxi: Deploy runtime PM support
- jz4740: Add support for JZ4780
- jz4740: Enable support for DT based platforms
- sdhci: Various improvement to timeout handling
- sdhci: Disable support for HS200/HS400/UHS when no 1.8V support
- sdhci-omap: Add support for controller in k2g SoC
- sdhci-omap: Add workarounds for a couple of Erratas
- sdhci-omap: Enable support for generic sdhci DT properties
- sdhci-cadence: Re-send tune request to deal with errata
- sdhci-pci: Fix 3.3V voltage switch for some BYT-based Intel controllers
- sdhci-pci: Avoid 3.3V signaling on some NI 904x
- sdhci-esdhc-imx: Use watermark levels for PIO access
- sdhci-msm: Improve card detection handling
- sdhci-msm: Add support voltage pad switching"
* tag 'mmc-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (104 commits)
mmc: renesas_sdhi: really fix WP logic regressions
mmc: mvsdio: Enable MMC_CAP_ERASE
mmc: mvsdio: Respect card busy time out from mmc core
mmc: sdhci-msm: Remove NO_CARD_NO_RESET quirk
mmc: sunxi: Use ifdef rather than __maybe_unused
mmc: mxmmc: Use ifdef rather than __maybe_unused
mmc: mxmmc: include linux/highmem.h
mmc: sunxi: mark PM functions as __maybe_unused
mmc: Throttle calls to MMC_SEND_STATUS during mmc_do_erase()
mmc: au1xmmc: handle highmem pages
mmc: Allow non-sleeping GPIO cd
mmc: sdhci-*: Don't emit error msg if sdhci_add_host() fails
mmc: sd: Define name for default speed dtr
mmc: core: Move calls to ->prepare_hs400_tuning() closer to mmc code
mmc: sdhci-xenon: use match_string() helper
mmc: wbsd: handle highmem pages
mmc: ushc: handle highmem pages
mmc: mxcmmc: handle highmem pages
mmc: atmel-mci: use sg_copy_{from,to}_buffer
mmc: android-goldfish: use sg_copy_{from,to}_buffer
...
Pull timers and timekeeping updates from Thomas Gleixner:
- Core infrastucture work for Y2038 to address the COMPAT interfaces:
+ Add a new Y2038 safe __kernel_timespec and use it in the core
code
+ Introduce config switches which allow to control the various
compat mechanisms
+ Use the new config switch in the posix timer code to control the
32bit compat syscall implementation.
- Prevent bogus selection of CPU local clocksources which causes an
endless reselection loop
- Remove the extra kthread in the clocksource code which has no value
and just adds another level of indirection
- The usual bunch of trivial updates, cleanups and fixlets all over the
place
- More SPDX conversions
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
clocksource/drivers/mxs_timer: Switch to SPDX identifier
clocksource/drivers/timer-imx-tpm: Switch to SPDX identifier
clocksource/drivers/timer-imx-gpt: Switch to SPDX identifier
clocksource/drivers/timer-imx-gpt: Remove outdated file path
clocksource/drivers/arc_timer: Add comments about locking while read GFRC
clocksource/drivers/mips-gic-timer: Add pr_fmt and reword pr_* messages
clocksource/drivers/sprd: Fix Kconfig dependency
clocksource: Move inline keyword to the beginning of function declarations
timer_list: Remove unused function pointer typedef
timers: Adjust a kernel-doc comment
tick: Prefer a lower rating device only if it's CPU local device
clocksource: Remove kthread
time: Change nanosleep to safe __kernel_* types
time: Change types to new y2038 safe __kernel_* types
time: Fix get_timespec64() for y2038 safe compat interfaces
time: Add new y2038 safe __kernel_timespec
posix-timers: Make compat syscalls depend on CONFIG_COMPAT_32BIT_TIME
time: Introduce CONFIG_COMPAT_32BIT_TIME
time: Introduce CONFIG_64BIT_TIME in architectures
compat: Enable compat_get/put_timespec64 always
...
Pull siginfo updates from Eric Biederman:
"This set of changes close the known issues with setting si_code to an
invalid value, and with not fully initializing struct siginfo. There
remains work to do on nds32, arc, unicore32, powerpc, arm, arm64, ia64
and x86 to get the code that generates siginfo into a simpler and more
maintainable state. Most of that work involves refactoring the signal
handling code and thus careful code review.
Also not included is the work to shrink the in kernel version of
struct siginfo. That depends on getting the number of places that
directly manipulate struct siginfo under control, as it requires the
introduction of struct kernel_siginfo for the in kernel things.
Overall this set of changes looks like it is making good progress, and
with a little luck I will be wrapping up the siginfo work next
development cycle"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (46 commits)
signal/sh: Stop gcc warning about an impossible case in do_divide_error
signal/mips: Report FPE_FLTUNK for undiagnosed floating point exceptions
signal/um: More carefully relay signals in relay_signal.
signal: Extend siginfo_layout with SIL_FAULT_{MCEERR|BNDERR|PKUERR}
signal: Remove unncessary #ifdef SEGV_PKUERR in 32bit compat code
signal/signalfd: Add support for SIGSYS
signal/signalfd: Remove __put_user from signalfd_copyinfo
signal/xtensa: Use force_sig_fault where appropriate
signal/xtensa: Consistenly use SIGBUS in do_unaligned_user
signal/um: Use force_sig_fault where appropriate
signal/sparc: Use force_sig_fault where appropriate
signal/sparc: Use send_sig_fault where appropriate
signal/sh: Use force_sig_fault where appropriate
signal/s390: Use force_sig_fault where appropriate
signal/riscv: Replace do_trap_siginfo with force_sig_fault
signal/riscv: Use force_sig_fault where appropriate
signal/parisc: Use force_sig_fault where appropriate
signal/parisc: Use force_sig_mceerr where appropriate
signal/openrisc: Use force_sig_fault where appropriate
signal/nios2: Use force_sig_fault where appropriate
...
including:
- Extensive RST conversions and organizational work in the
memory-management docs thanks to Mike Rapoport.
- An update of Documentation/features from Andrea Parri and a script to
keep it updated.
- Various LICENSES updates from Thomas, along with a script to check SPDX
tags.
- Work to fix dangling references to documentation files; this involved a
fair number of one-liner comment changes outside of Documentation/
...and the usual list of documentation improvements, typo fixes, etc.
-----BEGIN PGP SIGNATURE-----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=I6FG
-----END PGP SIGNATURE-----
Merge tag 'docs-4.18' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"There's been a fair amount of work in the docs tree this time around,
including:
- Extensive RST conversions and organizational work in the
memory-management docs thanks to Mike Rapoport.
- An update of Documentation/features from Andrea Parri and a script
to keep it updated.
- Various LICENSES updates from Thomas, along with a script to check
SPDX tags.
- Work to fix dangling references to documentation files; this
involved a fair number of one-liner comment changes outside of
Documentation/
... and the usual list of documentation improvements, typo fixes, etc"
* tag 'docs-4.18' of git://git.lwn.net/linux: (103 commits)
Documentation: document hung_task_panic kernel parameter
docs/admin-guide/mm: add high level concepts overview
docs/vm: move ksm and transhuge from "user" to "internals" section.
docs: Use the kerneldoc comments for memalloc_no*()
doc: document scope NOFS, NOIO APIs
docs: update kernel versions and dates in tables
docs/vm: transhuge: split userspace bits to admin-guide/mm/transhuge
docs/vm: transhuge: minor updates
docs/vm: transhuge: change sections order
Documentation: arm: clean up Marvell Berlin family info
Documentation: gpio: driver: Fix a typo and some odd grammar
docs: ranoops.rst: fix location of ramoops.txt
scripts/documentation-file-ref-check: rewrite it in perl with auto-fix mode
docs: uio-howto.rst: use a code block to solve a warning
mm, THP, doc: Add document for thp_swpout/thp_swpout_fallback
w1: w1_io.c: fix a kernel-doc warning
Documentation/process/posting: wrap text at 80 cols
docs: admin-guide: add cgroup-v2 documentation
Revert "Documentation/features/vm: Remove arch support status file for 'pte_special'"
Documentation: refcount-vs-atomic: Update reference to LKMM doc.
...
- replaceme the force_dma flag with a dma_configure bus method.
(Nipun Gupta, although one patch is іncorrectly attributed to me
due to a git rebase bug)
- use GFP_DMA32 more agressively in dma-direct. (Takashi Iwai)
- remove PCI_DMA_BUS_IS_PHYS and rely on the dma-mapping API to do the
right thing for bounce buffering.
- move dma-debug initialization to common code, and apply a few cleanups
to the dma-debug code.
- cleanup the Kconfig mess around swiotlb selection
- swiotlb comment fixup (Yisheng Xie)
- a trivial swiotlb fix. (Dan Carpenter)
- support swiotlb on RISC-V. (based on a patch from Palmer Dabbelt)
- add a new generic dma-noncoherent dma_map_ops implementation and use
it for arc, c6x and nds32.
- improve scatterlist validity checking in dma-debug. (Robin Murphy)
- add a struct device quirk to limit the dma-mask to 32-bit due to
bridge/system issues, and switch x86 to use it instead of a local
hack for VIA bridges.
- handle devices without a dma_mask more gracefully in the dma-direct
code.
-----BEGIN PGP SIGNATURE-----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=6Acj
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-4.18' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- replace the force_dma flag with a dma_configure bus method. (Nipun
Gupta, although one patch is іncorrectly attributed to me due to a
git rebase bug)
- use GFP_DMA32 more agressively in dma-direct. (Takashi Iwai)
- remove PCI_DMA_BUS_IS_PHYS and rely on the dma-mapping API to do the
right thing for bounce buffering.
- move dma-debug initialization to common code, and apply a few
cleanups to the dma-debug code.
- cleanup the Kconfig mess around swiotlb selection
- swiotlb comment fixup (Yisheng Xie)
- a trivial swiotlb fix. (Dan Carpenter)
- support swiotlb on RISC-V. (based on a patch from Palmer Dabbelt)
- add a new generic dma-noncoherent dma_map_ops implementation and use
it for arc, c6x and nds32.
- improve scatterlist validity checking in dma-debug. (Robin Murphy)
- add a struct device quirk to limit the dma-mask to 32-bit due to
bridge/system issues, and switch x86 to use it instead of a local
hack for VIA bridges.
- handle devices without a dma_mask more gracefully in the dma-direct
code.
* tag 'dma-mapping-4.18' of git://git.infradead.org/users/hch/dma-mapping: (48 commits)
dma-direct: don't crash on device without dma_mask
nds32: use generic dma_noncoherent_ops
nds32: implement the unmap_sg DMA operation
nds32: consolidate DMA cache maintainance routines
x86/pci-dma: switch the VIA 32-bit DMA quirk to use the struct device flag
x86/pci-dma: remove the explicit nodac and allowdac option
x86/pci-dma: remove the experimental forcesac boot option
Documentation/x86: remove a stray reference to pci-nommu.c
core, dma-direct: add a flag 32-bit dma limits
dma-mapping: remove unused gfp_t parameter to arch_dma_alloc_attrs
dma-debug: check scatterlist segments
c6x: use generic dma_noncoherent_ops
arc: use generic dma_noncoherent_ops
arc: fix arc_dma_{map,unmap}_page
arc: fix arc_dma_sync_sg_for_{cpu,device}
arc: simplify arc_dma_sync_single_for_{cpu,device}
dma-mapping: provide a generic dma-noncoherent implementation
dma-mapping: simplify Kconfig dependencies
riscv: add swiotlb support
riscv: only enable ZONE_DMA32 for 64-bit
...
Filling in the padding slot in the bpf structure as a bug fix in 'ne'
overlapped with actually using that padding area for something in
'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
Use new return type vm_fault_t for fault handler. For
now, this is just documenting that the function returns
a VM_FAULT value rather than an errno. Once all instances
are converted, vm_fault_t will become a distinct type.
commit 1c8f422059 ("mm: change return type to vm_fault_t")
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
By default, sparse assumes a 64bit machine when compiled on x86-64
and 32bit when compiled on anything else.
This can of course create all sort of problems for the other archs, like
issuing false warnings ('shift too big (32) for type unsigned long'), or
worse, failing to emit legitimate warnings.
Fix this by adding the -m32/-m64 flag, depending on CONFIG_64BIT,
to CHECKFLAGS in the main Makefile (and so for all archs).
Also, remove the now unneeded -m32/-m64 in arch specific Makefiles.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Use 64-bit accesses for 64-bit floating-point general registers with
PTRACE_PEEKUSR, removing the truncation of their upper halves in the
FR=1 mode, caused by commit bbd426f542 ("MIPS: Simplify FP context
access"), which inadvertently switched them to using 32-bit accesses.
The PTRACE_POKEUSR side is fine as it's never been broken and continues
using 64-bit accesses.
Fixes: bbd426f542 ("MIPS: Simplify FP context access")
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.15+
Patchwork: https://patchwork.linux-mips.org/patch/19334/
Signed-off-by: James Hogan <jhogan@kernel.org>
Having PR_FP_MODE_FRE (i.e. Config5.FRE) set without PR_FP_MODE_FR (i.e.
Status.FR) is not supported as the lone purpose of Config5.FRE is to
emulate Status.FR=0 handling on FPU hardware that has Status.FR=1
hardwired[1][2]. Also we do not handle this case elsewhere, and assume
throughout our code that TIF_HYBRID_FPREGS and TIF_32BIT_FPREGS cannot
be set both at once for a task, leading to inconsistent behaviour if
this does happen.
Return unsuccessfully then from prctl(2) PR_SET_FP_MODE calls requesting
PR_FP_MODE_FRE to be set with PR_FP_MODE_FR clear. This corresponds to
modes allowed by `mips_set_personality_fp'.
References:
[1] "MIPS Architecture For Programmers, Vol. III: MIPS32 / microMIPS32
Privileged Resource Architecture", Imagination Technologies,
Document Number: MD00090, Revision 6.02, July 10, 2015, Table 9.69
"Config5 Register Field Descriptions", p. 262
[2] "MIPS Architecture For Programmers, Volume III: MIPS64 / microMIPS64
Privileged Resource Architecture", Imagination Technologies,
Document Number: MD00091, Revision 6.03, December 22, 2015, Table
9.72 "Config5 Register Field Descriptions", p. 288
Fixes: 9791554b45 ("MIPS,prctl: add PR_[GS]ET_FP_MODE prctl options for MIPS")
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.0+
Patchwork: https://patchwork.linux-mips.org/patch/19327/
Signed-off-by: James Hogan <jhogan@kernel.org>
Correct comments across ptrace(2) handlers about an FPU register context
layout discrepancy between MIPS I and later ISAs, which was fixed with
`linux-mips.org' (LMO) commit 42533948caac ("Major pile of FP emulator
changes."), the fix corrected with LMO commit 849fa7a50dff ("R3k FPU
ptrace() handling fixes."), and then broken and fixed over and over
again, until last time fixed with commit 80cbfad790 ("MIPS: Correct
MIPS I FP context layout").
NB running the GDB test suite for the relevant ABI/ISA and watching out
for regressions is advisable when poking around ptrace(2).
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/19326/
Signed-off-by: James Hogan <jhogan@kernel.org>
Use the pci_info() and pci_err() wrappers for dev_printk() when possible.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: James Hogan <jhogan@kernel.org>
S390 bpf_jit.S is removed in net-next and had changes in 'net',
since that code isn't used any more take the removal.
TLS data structures split the TX and RX components in 'net-next',
put the new struct members from the bug fix in 'net' into the RX
part.
The 'net-next' tree had some reworking of how the ERSPAN code works in
the GRE tunneling code, overlapping with a one-line headroom
calculation fix in 'net'.
Overlapping changes in __sock_map_ctx_update_elem(), keep the bits
that read the prog members via READ_ONCE() into local variables
before using them.
Signed-off-by: David S. Miller <davem@davemloft.net>
Assembly language within the MIPS kernel conventionally indents
instructions which are in a branch delay slot to make them easier to
see. Commit 8483b14aaa ("MIPS: lib: memset: Whitespace fixes") rather
inexplicably removed all of these indentations from memset.S. Reinstate
the convention for all instructions in a branch delay slot. This
effectively reverts the above commit, plus other locations introduced
with MIPSR6 support.
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/19111/
Signed-off-by: James Hogan <jhogan@kernel.org>
This header only contains platform_data. Move it to the proper directory.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: James Hogan <jhogan@kernel.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Most mips builds fail with
arch/mips/kernel/traps.c: In function ‘force_fcr31_sig’:
arch/mips/kernel/traps.c:732:2: error:
‘si_code’ may be used uninitialized in this function
Fix the problem by initializing si_code with FPE_FLTUNK (undiagnosed
floating point exception).
Fixes: f43a54a0d9 ("signal/mips: Use force_sig_fault where appropriate")
Cc: linux-mips@linux-mips.org
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Variants of proc_create{,_data} that directly take a seq_file show
callback and drastically reduces the boilerplate code in the callers.
All trivial callers converted over.
Signed-off-by: Christoph Hellwig <hch@lst.de>
When perf is used in non-system mode, i.e. without specifying CPUs to
count on, check_and_calc_range falls into the case when it sets
M_TC_EN_ALL in the counter config_base. This has the impact of always
counting for all of the threads in a core, even when the user has not
requested it. For example this can be seen with a test program which
executes 30002 instructions and 10000 branches running on one VPE and a
busy load on the other VPE in the core. Without this commit, the
expected count is not returned:
taskset 4 dd if=/dev/zero of=/dev/null count=100000 & taskset 8 perf
stat -e instructions:u,branches:u ./test_prog
Performance counter stats for './test_prog':
103235 instructions:u
17015 branches:u
In order to fix this, remove check_and_calc_range entirely and perform
all of the logic in mipsxx_pmu_enable_event. Since
mipsxx_pmu_enable_event now requires the range of the event, ensure that
it is set by mipspmu_perf_event_encode in the same circumstances as
before (i.e. #ifdef CONFIG_MIPS_MT_SMP && num_possible_cpus() > 1).
The logic of mipsxx_pmu_enable_event now becomes:
If the CPU is a BMIPS5000, then use the special vpe_id() implementation
to select which VPE to count.
If the counter has a range greater than a single VPE, i.e. it is a
core-wide counter, then ensure that the counter is set up to count
events from all TCs (though, since this is true by definition, is this
necessary? Just enabling a core-wide counter in the per-VPE case appears
experimentally to return the same counts. This is left in for now as the
logic was present before).
If the event is set up to count a particular CPU (i.e. system mode),
then the VPE ID of that CPU is used for the counter.
Otherwise, the event should be counted on the CPU scheduling this thread
(this was the critical bit missing from the previous implementation) so
the VPE ID of this CPU is used for the counter.
With this commit, the same test as before returns the counts expected:
taskset 4 dd if=/dev/zero of=/dev/null count=100000 & taskset 8 perf
stat -e instructions:u,branches:u ./test_prog
Performance counter stats for './test_prog':
30002 instructions:u
10000 branches:u
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/19138/
Signed-off-by: James Hogan <jhogan@kernel.org>
There are a couple of FIXME's in the perf code which state that
cpu_data[event->cpu].vpe_id reports 0 for both CPUs. This is no longer
the case, since the vpe_id is used extensively by SMP CPS.
VPE local counting gets around this by using smp_processor_id() instead.
As it happens this does work correctly to count events on the right VPE,
but relies on 2 assumptions:
a) Always having 2 VPEs / core.
b) The hardware only paying attention to the least significant bit of
the PERFCTL.VPEID field.
If either of these assumptions change then the incorrect VPEs events
will be counted.
Fix this by replacing smp_processor_id() with
cpu_vpe_id(¤t_cpu_data), in the vpe_id() macro, and pass vpe_id()
to M_PERFCTL_VPEID() when setting up PERFCTL.VPEID. The FIXME's can also
be removed since they no longer apply.
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/19137/
Signed-off-by: James Hogan <jhogan@kernel.org>
The presence of per TC performance counters is now detected by
cpu-probe.c and indicated by MIPS_CPU_MT_PER_TC_PERF_COUNTERS in
cpu_data. Switch detection of the feature to use this new flag rather
than blindly testing the implementation specific config7 register with a
magic number.
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Maciej W. Rozycki <macro@mips.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Robert Richter <rric@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: oprofile-list@lists.sf.net
Patchwork: https://patchwork.linux-mips.org/patch/19142/
Signed-off-by: James Hogan <jhogan@kernel.org>
Processors implementing the MIPS MT ASE may have performance counters
implemented per core or per TC. Processors implemented by MIPS
Technologies signify presence per TC through a bit in the implementation
specific Config7 register. Currently the code which probes for their
presence blindly reads a magic number corresponding to this bit, despite
it potentially having a different meaning in the CPU implementation.
Since CPU features are generally detected by cpu-probe.c, perform the
detection here instead. Introduce cpu_set_mt_per_tc_perf which checks
the bit in config7 and call it from MIPS CPUs known to implement this
bit and the MT ASE, specifically, the 34K, 1004K and interAptiv.
Once the presence of the per-tc counter is indicated in cpu_data, tests
for it can be updated to use this flag.
Suggested-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Matt Redfearn <matt.redfearn@mips.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Maciej W. Rozycki <macro@mips.com>
Cc: linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/19136/
Signed-off-by: James Hogan <jhogan@kernel.org>
The ool_skb_header_pointer() and size_to_len() is unused same as
tmp_offset, therefore remove all of them.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add phy to switch port connections for PCB123 for internal PHYs.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: linux-mips@linux-mips.org
Cc: netdev@vger.kernel.org
Signed-off-by: James Hogan <jhogan@kernel.org>
Ocelot has an integrated switch, add support for it.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: linux-mips@linux-mips.org
Cc: netdev@vger.kernel.org
Signed-off-by: James Hogan <jhogan@kernel.org>
This work is now performed by the watchdog driver directly.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: linux-mips@linux-mips.org
Cc: linux-watchdog@vger.kernel.org
Signed-off-by: James Hogan <jhogan@kernel.org>
The watchdog is an useful piece of hardware, so there's no reason not to
enable it.
Besides, this is important for restart to work after the change in the
next commit.
This commit enables the Kconfig option in the qi_lb60 defconfig.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: linux-mips@linux-mips.org
Cc: linux-watchdog@vger.kernel.org
Signed-off-by: James Hogan <jhogan@kernel.org>
- The previous node requested a memory area of 0x100 bytes, while the
driver only manipulates four registers present in the first 0x10 bytes.
- The driver requests for the "rtc" clock, but the previous node did not
provide any.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Mathieu Malaterre <malat@debian.org>
Acked-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-watchdog@vger.kernel.org
Signed-off-by: James Hogan <jhogan@kernel.org>
Also remove the watchdog platform_device from platform.c, since it
wasn't used anywhere anyway.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: linux-mips@linux-mips.org
Cc: linux-watchdog@vger.kernel.org
Cc: devicetree@vger.kernel.org
[jhogan@kernel.org: Drop jz4740_wdt_device declaration from header]
Signed-off-by: James Hogan <jhogan@kernel.org>
Trivial fix to spelling mistake in pr_warn message text.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kernel-janitors@vger.kernel.org
Signed-off-by: James Hogan <jhogan@kernel.org>
Since struct timespec is not y2038 safe on 32bit machines, this patch
converts update_persistent_clock() to update_persistent_clock64() using
struct timespec64.
The rtc_mips_set_time() and rtc_mips_set_mmss() interfaces were using
'unsigned long' type that is not y2038 safe on 32bit machines, moreover
there is only one platform implementing rtc_mips_set_time() and two
platforms implementing rtc_mips_set_mmss(), so we can just make them each
implement update_persistent_clock64() directly, to get that helper out
of the common mips code by removing rtc_mips_set_time() and
rtc_mips_set_mmss() interfaces.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@linux-mips.org
Signed-off-by: James Hogan <jhogan@kernel.org>
Since struct timespec is not y2038 safe on 32bit machines, this patch
converts read_persistent_clock() to read_persistent_clock64() using
struct timespec64, as well as converting mktime() to mktime64().
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@linux-mips.org
Signed-off-by: James Hogan <jhogan@kernel.org>
The dummy read_persistent_clock() uses a timespec, which is not year
2038 safe on 32bit systems. Thus remove this obsolete interface.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/19114/
Signed-off-by: James Hogan <jhogan@kernel.org>
Check the TIF_32BIT_FPREGS task setting of the tracee rather than the
tracer in determining the layout of floating-point general registers in
the floating-point context, correcting access to odd-numbered registers
for o32 tracees where the setting disagrees between the two processes.
Fixes: 597ce1723e ("MIPS: Support for 64-bit FP with O32 binaries")
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.14+
Signed-off-by: James Hogan <jhogan@kernel.org>
Commit b35565bb16 ("MIPS: generic: Add support for MIPSfpga") added
and its.S file for xilfpga but forgot to add it to
arch/mips/generic/Platform so it is never used.
Fixes: b35565bb16 ("MIPS: generic: Add support for MIPSfpga")
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.15+
Patchwork: https://patchwork.linux-mips.org/patch/19245/
Signed-off-by: James Hogan <jhogan@kernel.org>
A dtb.o is generated from nexys4ddr.dts but this is never used since it
has been moved to mips/generic with commit b35565bb16 ("MIPS: generic:
Add support for MIPSfpga").
Fixes: b35565bb16 ("MIPS: generic: Add support for MIPSfpga")
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.15+
Patchwork: https://patchwork.linux-mips.org/patch/19244/
Signed-off-by: James Hogan <jhogan@kernel.org>
Trivial fix to spelling mistake in debugfs_entries text.
Fixes: 669e846e6c ("KVM/MIPS32: MIPS arch specific APIs for KVM")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kernel-janitors@vger.kernel.org
Cc: <stable@vger.kernel.org> # 3.10+
Signed-off-by: James Hogan <jhogan@kernel.org>
Correct commit 7aeb753b53 ("MIPS: Implement task_user_regset_view.")
and expose the FIR register using the unused 4 bytes at the end of the
NT_PRFPREG regset. Without that register included clients cannot use
the PTRACE_GETREGSET request to retrieve the complete FPU register set
and have to resort to one of the older interfaces, either PTRACE_PEEKUSR
or PTRACE_GETFPREGS, to retrieve the missing piece of data. Also the
register is irreversibly missing from core dumps.
This register is architecturally hardwired and read-only so the write
path does not matter. Ignore data supplied on writes then.
Fixes: 7aeb753b53 ("MIPS: Implement task_user_regset_view.")
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.13+
Patchwork: https://patchwork.linux-mips.org/patch/19273/
Signed-off-by: James Hogan <jhogan@kernel.org>
The debug definitions were missing for MACH_JZ4770, resulting in a build
failure when DEBUG_ZBOOT was set.
Since the UART addresses are the same across all Ingenic SoCs, we just
use a #ifdef CONFIG_MACH_INGENIC instead of checking for individual
Ingenic SoCs.
Additionally, I added a #define for the UART0 address in-code and
dropped the <asm/mach-jz4740/base.h> include, for the reason that this
include file is slowly being phased out as the whole platform is being
moved to devicetree.
Fixes: 9be5f3e92e ("MIPS: ingenic: Initial JZ4770 support")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.16
Patchwork: https://patchwork.linux-mips.org/patch/18957/
Signed-off-by: James Hogan <jhogan@kernel.org>
When DMA will be performed to a MIPS32 1004K CPS, the L1-cache for the
range needs to be flushed and invalidated first.
The code currently takes one of two approaches.
1/ If the range is less than the size of the dcache, then HIT type
requests flush/invalidate cache lines for the particular addresses.
HIT-type requests a globalised by the CPS so this is safe on SMP.
2/ If the range is larger than the size of dcache, then INDEX type
requests flush/invalidate the whole cache. INDEX type requests affect
the local cache only. CPS does not propagate them in any way. So this
invalidation is not safe on SMP CPS systems.
Data corruption due to '2' can quite easily be demonstrated by
repeatedly "echo 3 > /proc/sys/vm/drop_caches" and then sha1sum a file
that is several times the size of available memory. Dropping caches
means that large contiguous extents (large than dcache) are more likely.
This was not a problem before Linux-4.8 because option 2 was never used
if CONFIG_MIPS_CPS was defined. The commit which removed that apparently
didn't appreciate the full consequence of the change.
We could, in theory, globalize the INDEX based flush by sending an IPI
to other cores. These cache invalidation routines can be called with
interrupts disabled and synchronous IPI require interrupts to be
enabled. Asynchronous IPI may not trigger writeback soon enough. So we
cannot use IPI in practice.
We can already test if IPI would be needed for an INDEX operation with
r4k_op_needs_ipi(R4K_INDEX). If this is true then we mustn't try the
INDEX approach as we cannot use IPI. If this is false (e.g. when there
is only one core and hence one L1 cache) then it is safe to use the
INDEX approach without IPI.
This patch avoids options 2 if r4k_op_needs_ipi(R4K_INDEX), and so
eliminates the corruption.
Fixes: c00ab4896e ("MIPS: Remove cpu_has_safe_index_cacheops")
Signed-off-by: NeilBrown <neil@brown.name>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.8+
Patchwork: https://patchwork.linux-mips.org/patch/19259/
Signed-off-by: James Hogan <jhogan@kernel.org>
This way we have one central definition of it, and user can select it as
needed. The new option is not user visible, which is the behavior
it had in most architectures, with a few notable exceptions:
- On x86_64 and mips/loongson3 it used to be user selectable, but
defaulted to y. It now is unconditional, which seems like the right
thing for 64-bit architectures without guaranteed availablity of
IOMMUs.
- on powerpc the symbol is user selectable and defaults to n, but
many boards select it. This change assumes no working setup
required a manual selection, but if that turned out to be wrong
we'll have to add another select statement or two for the respective
boards.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Only mips and unicore32 select CONFIG_NEED_SG_DMA_LENGTH when building
swiotlb. swiotlb itself never merges segements and doesn't accesses the
dma_length field directly, so drop the dependency.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: James Hogan <jhogan@kernel.org>
Define this symbol if the architecture either uses 64-bit pointers or the
PHYS_ADDR_T_64BIT is set. This covers 95% of the old arch magic. We only
need an additional select for Xen on ARM (why anyway?), and we now always
set ARCH_DMA_ADDR_T_64BIT on mips boards with 64-bit physical addressing
instead of only doing it when highmem is set.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: James Hogan <jhogan@kernel.org>
Instead select the PHYS_ADDR_T_64BIT for 32-bit architectures that need a
64-bit phys_addr_t type directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: James Hogan <jhogan@kernel.org>
This way we have one central definition of it, and user can select it as
needed. Note that we now also always select it when CONFIG_DMA_API_DEBUG
is select, which fixes some incorrect checks in a few network drivers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
This way we have one central definition of it, and user can select it as
needed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
This avoids selecting IOMMU_HELPER just for this function. And we only
use it once or twice in normal builds so this often even is a size
reduction.
Signed-off-by: Christoph Hellwig <hch@lst.de>
There is no arch specific code required for dma-debug, so there is no
need to opt into the support either.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Most mainstream architectures are using 65536 entries, so lets stick to
that. If someone is really desperate to override it that can still be
done through <asm/dma-mapping.h>, but I'd rather see a really good
rationale for that.
dma_debug_init is now called as a core_initcall, which for many
architectures means much earlier, and provides dma-debug functionality
earlier in the boot process. This should be safe as it only relies
on the memory allocator already being available.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
This was used by the ide, scsi and networking code in the past to
determine if they should bounce payloads. Now that the dma mapping
always have to support dma to all physical memory (thanks to swiotlb
for non-iommu systems) there is no need to this crude hack any more.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Palmer Dabbelt <palmer@sifive.com> (for riscv)
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Since LD_ABS/LD_IND instructions are now removed from the core and
reimplemented through a combination of inlined BPF instructions and
a slow-path helper, we can get rid of the complexity from mips64 JIT.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Now that we have MMC support, enable ext2/3/4 support
in the CI20 defconfig.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Acked-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Enable the SD/MMC support, along with DMA engine
support in the CI20 defconfig.
Acked-by: James Hogan <jhogan@kernel.org>
Tested-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.co.uk>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Now that we have support for JZ480 SoCs in the MMC driver,
let's enable it on the devicetree.
Acked-by: James Hogan <jhogan@kernel.org>
Tested-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.co.uk>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add the devicetree node to support the MMC host controller
available in JZ480 SoCs.
Acked-by: James Hogan <jhogan@kernel.org>
Tested-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.co.uk>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add the devicetree node to support the DMA controller found
in JZ480 SoCs.
Tested-by: Mathieu Malaterre <malat@debian.org>
Acked-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.co.uk>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlrdQu4eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGVjEIAJqS+sFJCAL8rNAv
tiVJHuAjogVdZGJJFBUWyb4yNZw7nRSKfitaSe875WdF55IGEhnMDbAGe7IMEb5j
1F8Ml2bzJzMWxfBWAzeU+wj6FaQksbIsI1gVM8tqk/Wtu121pB32VW8R82oHg+Hr
sjsFTKFicNsqih+7QTVujaRjSmabKf0/JdyYM6p1cqWrxZQ0pmFaGDu0rwet9PFx
lJsewOmnoZ0GV/Qzn40E304Xf+Vv2gVDVbC5wY86ejNigFt+5qN+gtDqDu7UkftR
ZfD4vJuiKCigNfUrpbJWfpbegBiQc0JMvjLWWhgo/AYdGhNGMlwjQanh2oZcXlrw
VmrNduo=
=/j3z
-----END PGP SIGNATURE-----
Merge tag 'v4.17-rc2' into docs-next
Merge -rc2 to pick up the changes to
Documentation/core-api/kernel-api.rst that hit mainline via the
networking tree. In their absence, subsequent patches cannot be
applied.
Filling in struct siginfo before calling force_sig_info a tedious and
error prone process, where once in a great while the wrong fields
are filled out, and siginfo has been inconsistently cleared.
Simplify this process by using the helper force_sig_fault. Which
takes as a parameters all of the information it needs, ensures
all of the fiddly bits of filling in struct siginfo are done properly
and then calls force_sig_info.
In short about a 5 line reduction in code for every time force_sig_info
is called, which makes the calling function clearer.
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Call clear_siginfo to ensure every stack allocated siginfo is properly
initialized before being passed to the signal sending functions.
Note: It is not safe to depend on C initializers to initialize struct
siginfo on the stack because C is allowed to skip holes when
initializing a structure.
The initialization of struct siginfo in tracehook_report_syscall_exit
was moved from the helper user_single_step_siginfo into
tracehook_report_syscall_exit itself, to make it clear that the local
variable siginfo gets fully initialized.
In a few cases the scope of struct siginfo has been reduced to make it
clear that siginfo siginfo is not used on other paths in the function
in which it is declared.
Instances of using memset to initialize siginfo have been replaced
with calls clear_siginfo for clarity.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
This struct variable is used during init only. It gets passed to the
gpio_led_register_device() which creates its own data copy. That allows
using __initdata and saving some minimal amount of memory.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18928/
Signed-off-by: James Hogan <jhogan@kernel.org>
The commit b35cd9884f ("lib: Add shared copies of some GCC library
routines") makes it possible to share generic GCC library routines by
several architectures.
This commit removes several generic GCC library routines from
arch/mips/lib/ in favour of similar routines from lib/.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
[Matt Redfearn] Use GENERIC_LIB_* named Kconfig entries
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/19051/
Signed-off-by: James Hogan <jhogan@kernel.org>
In preparation for removing some of the MIPS compiler intrinsics from
arch/mips/lib, first update the build of vmlinuz to use the generic
ashldi3 from lib.
Both ashldi3 and bswapsi objects need to be built with different CFLAGS
for inclusion to vmlinuz rather than simply including the object built
for the main kernel image. The objects cannot be built directly from
source, since CONFIG_MODVERSIONS changes cmd_cc_o_c to prevent this.
Split the rule to ship ashldi3 and bswapsi from the relevant source
locations.
These files make no reference to other files in their directory, so the
additional CFLAGS are apparently unnecessary - remove them as well.
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Antony Pavlov <antonynpavlov@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/19050/
[jhogan@kernel.org: Add if_changed and FORCE to fix build failure when
arch/mips/boot/compressed/ashldi3.c is already generated but there is
no .ashldi3.c.cmd file yet]
Signed-off-by: James Hogan <jhogan@kernel.org>
This adds support for detecting this model board and registers some LEDs
and buttons.
There are two uncommon things regarding this device:
1) It can use two different "board_id" ID values.
Unit I have uses "U12H139T00_NETGEAR" value. This magic is also used
in firmware file header. There are two reports (one from an OpenWrt
user) of a different "U12H139T50_NETGEAR" magic though.
2) Power LEDs share GPIOs with buttons.
Amber one seems to share GPIO 2 with WPS button and green one seems
to share GPIO 3 with reset button. It remains unknown how to support
them and handle buttons at the same time. For that reason they aren't
added to the list of supported LEDs.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/19004/
Signed-off-by: James Hogan <jhogan@kernel.org>
arch/mips/boot/dts/Makefile collects objects from sub-directories into
built-in.a only when CONFIG_BUILTIN_DTB is enabled. Reflect it also to
the sub-directory Makefiles. This suppresses unneeded built-in.a
creation in arch/mips/boot/dts/*/ directories.
While I am here, I replaced $(patsubst %.dtb, %.dtb.o, $(dtb-y)) with
$(addsuffix .o, $(dtb-y)) to simplify the code a little bit.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/19099/
Signed-off-by: James Hogan <jhogan@kernel.org>
MIPS is the weirdest case for sysvipc, because each of the
three data structures is done differently:
* msqid64_ds has padding in the right place so we could in theory
extend this one to just have 64-bit values instead of time_t.
As this does not work for most of the other combinations,
we just handle it in the common manner though.
* semid64_ds has no padding for 64-bit time_t, but has two reserved
'long' fields, which are sufficient to extend the sem_otime
and sem_ctime fields to 64 bit. In order to do this, the libc
implementation will have to copy the data into another structure
that has the fields in a different order. MIPS is the only
architecture with this problem, so this is best done in MIPS
specific libc code.
* shmid64_ds is slightly worse than that, because it has three
time_t fields but only two unused 32-bit words. As a workaround,
we extend each field only by 16 bits, ending up with 48-bit
timestamps that user space again has to work around by itself.
The compat versions of the data structures are changed in the
same way.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The label .Llast_fixup\@ is jumped to on page fault within the final
byte set loop of memset (on < MIPSR6 architectures). For some reason, in
this fault handler, the v1 register is randomly set to a2 & STORMASK.
This clobbers v1 for the calling function. This can be observed with the
following test code:
static int __init __attribute__((optimize("O0"))) test_clear_user(void)
{
register int t asm("v1");
char *test;
int j, k;
pr_info("\n\n\nTesting clear_user\n");
test = vmalloc(PAGE_SIZE);
for (j = 256; j < 512; j++) {
t = 0xa5a5a5a5;
if ((k = clear_user(test + PAGE_SIZE - 256, j)) != j - 256) {
pr_err("clear_user (%px %d) returned %d\n", test + PAGE_SIZE - 256, j, k);
}
if (t != 0xa5a5a5a5) {
pr_err("v1 was clobbered to 0x%x!\n", t);
}
}
return 0;
}
late_initcall(test_clear_user);
Which demonstrates that v1 is indeed clobbered (MIPS64):
Testing clear_user
v1 was clobbered to 0x1!
v1 was clobbered to 0x2!
v1 was clobbered to 0x3!
v1 was clobbered to 0x4!
v1 was clobbered to 0x5!
v1 was clobbered to 0x6!
v1 was clobbered to 0x7!
Since the number of bytes that could not be set is already contained in
a2, the andi placing a value in v1 is not necessary and actively
harmful in clobbering v1.
Reported-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/19109/
Signed-off-by: James Hogan <jhogan@kernel.org>
The __clear_user function is defined to return the number of bytes that
could not be cleared. From the underlying memset / bzero implementation
this means setting register a2 to that number on return. Currently if a
page fault is triggered within the memset_partial block, the value
loaded into a2 on return is meaningless.
The label .Lpartial_fixup\@ is jumped to on page fault. In order to work
out how many bytes failed to copy, the exception handler should find how
many bytes left in the partial block (andi a2, STORMASK), add that to
the partial block end address (a2), and subtract the faulting address to
get the remainder. Currently it incorrectly subtracts the partial block
start address (t1), which has additionally been clobbered to generate a
jump target in memset_partial. Fix this by adding the block end address
instead.
This issue was found with the following test code:
int j, k;
for (j = 0; j < 512; j++) {
if ((k = clear_user(NULL, j)) != j) {
pr_err("clear_user (NULL %d) returned %d\n", j, k);
}
}
Which now passes on Creator Ci40 (MIPS32) and Cavium Octeon II (MIPS64).
Suggested-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/19108/
Signed-off-by: James Hogan <jhogan@kernel.org>
The MIPS kernel memset / bzero implementation includes a small_memset
branch which is used when the region to be set is smaller than a long (4
bytes on 32bit, 8 bytes on 64bit). The current small_memset
implementation uses a simple store byte loop to write the destination.
There are 2 issues with this implementation:
1. When EVA mode is active, user and kernel address spaces may overlap.
Currently the use of the sb instruction means kernel mode addressing is
always used and an intended write to userspace may actually overwrite
some critical kernel data.
2. If the write triggers a page fault, for example by calling
__clear_user(NULL, 2), instead of gracefully handling the fault, an OOPS
is triggered.
Fix these issues by replacing the sb instruction with the EX() macro,
which will emit EVA compatible instuctions as required. Additionally
implement a fault fixup for small_memset which sets a2 to the number of
bytes that could not be cleared (as defined by __clear_user).
Reported-by: Chuanhua Lei <chuanhua.lei@intel.com>
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/18975/
Signed-off-by: James Hogan <jhogan@kernel.org>
Mike Rapoport says:
These patches convert files in Documentation/vm to ReST format, add an
initial index and link it to the top level documentation.
There are no contents changes in the documentation, except few spelling
fixes. The relatively large diffstat stems from the indentation and
paragraph wrapping changes.
I've tried to keep the formatting as consistent as possible, but I could
miss some places that needed markup and add some markup where it was not
necessary.
[jc: significant conflicts in vm/hmm.rst]
__get_user_pages_fast handles errors differently from
get_user_pages_fast: the former always returns the number of pages
pinned, the later might return a negative error code.
Link: http://lkml.kernel.org/r/1522962072-182137-6-git-send-email-mst@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While a barrier is present in the writeX() functions before the register
write, a similar barrier is missing in the readX() functions after the
register read. This could allow memory accesses following readX() to
observe stale data.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/19069/
[jhogan@kernel.org: Tidy commit message]
Signed-off-by: James Hogan <jhogan@kernel.org>
writeX() has strong ordering semantics with respect to memory updates.
In the absence of a write barrier or a compiler barrier, the compiler
can reorder register and memory update instructions. This breaks the
writeX() API.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18997/
[jhogan@kernel.org: Tidy commit message]
Signed-off-by: James Hogan <jhogan@kernel.org>
Patch series "mm: introduce MAP_FIXED_NOREPLACE", v2.
This has started as a follow up discussion [3][4] resulting in the
runtime failure caused by hardening patch [5] which removes MAP_FIXED
from the elf loader because MAP_FIXED is inherently dangerous as it
might silently clobber an existing underlying mapping (e.g. stack).
The reason for the failure is that some architectures enforce an
alignment for the given address hint without MAP_FIXED used (e.g. for
shared or file backed mappings).
One way around this would be excluding those archs which do alignment
tricks from the hardening [6]. The patch is really trivial but it has
been objected, rightfully so, that this screams for a more generic
solution. We basically want a non-destructive MAP_FIXED.
The first patch introduced MAP_FIXED_NOREPLACE which enforces the given
address but unlike MAP_FIXED it fails with EEXIST if the given range
conflicts with an existing one. The flag is introduced as a completely
new one rather than a MAP_FIXED extension because of the backward
compatibility. We really want a never-clobber semantic even on older
kernels which do not recognize the flag. Unfortunately mmap sucks
wrt flags evaluation because we do not EINVAL on unknown flags. On
those kernels we would simply use the traditional hint based semantic so
the caller can still get a different address (which sucks) but at least
not silently corrupt an existing mapping. I do not see a good way
around that. Except we won't export expose the new semantic to the
userspace at all.
It seems there are users who would like to have something like that.
Jemalloc has been mentioned by Michael Ellerman [7]
Florian Weimer has mentioned the following:
: glibc ld.so currently maps DSOs without hints. This means that the kernel
: will map right next to each other, and the offsets between them a completely
: predictable. We would like to change that and supply a random address in a
: window of the address space. If there is a conflict, we do not want the
: kernel to pick a non-random address. Instead, we would try again with a
: random address.
John Hubbard has mentioned CUDA example
: a) Searches /proc/<pid>/maps for a "suitable" region of available
: VA space. "Suitable" generally means it has to have a base address
: within a certain limited range (a particular device model might
: have odd limitations, for example), it has to be large enough, and
: alignment has to be large enough (again, various devices may have
: constraints that lead us to do this).
:
: This is of course subject to races with other threads in the process.
:
: Let's say it finds a region starting at va.
:
: b) Next it does:
: p = mmap(va, ...)
:
: *without* setting MAP_FIXED, of course (so va is just a hint), to
: attempt to safely reserve that region. If p != va, then in most cases,
: this is a failure (almost certainly due to another thread getting a
: mapping from that region before we did), and so this layer now has to
: call munmap(), before returning a "failure: retry" to upper layers.
:
: IMPROVEMENT: --> if instead, we could call this:
:
: p = mmap(va, ... MAP_FIXED_NOREPLACE ...)
:
: , then we could skip the munmap() call upon failure. This
: is a small thing, but it is useful here. (Thanks to Piotr
: Jaroszynski and Mark Hairgrove for helping me get that detail
: exactly right, btw.)
:
: c) After that, CUDA suballocates from p, via:
:
: q = mmap(sub_region_start, ... MAP_FIXED ...)
:
: Interestingly enough, "freeing" is also done via MAP_FIXED, and
: setting PROT_NONE to the subregion. Anyway, I just included (c) for
: general interest.
Atomic address range probing in the multithreaded programs in general
sounds like an interesting thing to me.
The second patch simply replaces MAP_FIXED use in elf loader by
MAP_FIXED_NOREPLACE. I believe other places which rely on MAP_FIXED
should follow. Actually real MAP_FIXED usages should be docummented
properly and they should be more of an exception.
[1] http://lkml.kernel.org/r/20171116101900.13621-1-mhocko@kernel.org
[2] http://lkml.kernel.org/r/20171129144219.22867-1-mhocko@kernel.org
[3] http://lkml.kernel.org/r/20171107162217.382cd754@canb.auug.org.au
[4] http://lkml.kernel.org/r/1510048229.12079.7.camel@abdul.in.ibm.com
[5] http://lkml.kernel.org/r/20171023082608.6167-1-mhocko@kernel.org
[6] http://lkml.kernel.org/r/20171113094203.aofz2e7kueitk55y@dhcp22.suse.cz
[7] http://lkml.kernel.org/r/87efp1w7vy.fsf@concordia.ellerman.id.au
This patch (of 2):
MAP_FIXED is used quite often to enforce mapping at the particular range.
The main problem of this flag is, however, that it is inherently dangerous
because it unmaps existing mappings covered by the requested range. This
can cause silent memory corruptions. Some of them even with serious
security implications. While the current semantic might be really
desiderable in many cases there are others which would want to enforce the
given range but rather see a failure than a silent memory corruption on a
clashing range. Please note that there is no guarantee that a given range
is obeyed by the mmap even when it is free - e.g. arch specific code is
allowed to apply an alignment.
Introduce a new MAP_FIXED_NOREPLACE flag for mmap to achieve this
behavior. It has the same semantic as MAP_FIXED wrt. the given address
request with a single exception that it fails with EEXIST if the requested
address is already covered by an existing mapping. We still do rely on
get_unmaped_area to handle all the arch specific MAP_FIXED treatment and
check for a conflicting vma after it returns.
The flag is introduced as a completely new one rather than a MAP_FIXED
extension because of the backward compatibility. We really want a
never-clobber semantic even on older kernels which do not recognize the
flag. Unfortunately mmap sucks wrt. flags evaluation because we do not
EINVAL on unknown flags. On those kernels we would simply use the
traditional hint based semantic so the caller can still get a different
address (which sucks) but at least not silently corrupt an existing
mapping. I do not see a good way around that.
[mpe@ellerman.id.au: fix whitespace]
[fail on clashing range with EEXIST as per Florian Weimer]
[set MAP_FIXED before round_hint_to_min as per Khalid Aziz]
Link: http://lkml.kernel.org/r/20171213092550.2774-2-mhocko@kernel.org
Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Russell King - ARM Linux <linux@armlinux.org.uk>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Kees Cook <keescook@chromium.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Jason Evans <jasone@google.com>
Cc: David Goldblatt <davidtgoldblatt@gmail.com>
Cc: Edward Tomasz Napierała <trasz@FreeBSD.org>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "exec: Pin stack limit during exec".
Attempts to solve problems with the stack limit changing during exec
continue to be frustrated[1][2]. In addition to the specific issues
around the Stack Clash family of flaws, Andy Lutomirski pointed out[3]
other places during exec where the stack limit is used and is assumed to
be unchanging. Given the many places it gets used and the fact that it
can be manipulated/raced via setrlimit() and prlimit(), I think the only
way to handle this is to move away from the "current" view of the stack
limit and instead attach it to the bprm, and plumb this down into the
functions that need to know the stack limits. This series implements
the approach.
[1] 04e35f4495 ("exec: avoid RLIMIT_STACK races with prlimit()")
[2] 779f4e1c6c ("Revert "exec: avoid RLIMIT_STACK races with prlimit()"")
[3] to security@kernel.org, "Subject: existing rlimit races?"
This patch (of 3):
Since it is possible that the stack rlimit can change externally during
exec (either via another thread calling setrlimit() or another process
calling prlimit()), provide a way to pass the rlimit down into the
per-architecture mm layout functions so that the rlimit can stay in the
bprm structure instead of sitting in the signal structure until exec is
finalized.
Link: http://lkml.kernel.org/r/1518638796-20819-2-git-send-email-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Hugh Dickins <hughd@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Greg KH <greg@kroah.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Cc: Brad Spengler <spender@grsecurity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
These are the main MIPS changes for 4.17. Rough overview:
(1) generic platform: Add support for Microsemi Ocelot SoCs
(2) crypto: Add CRC32 and CRC32C HW acceleration module
(3) Various cleanups and misc improvements
Miscellaneous:
- Hang more efficiently on halt/powerdown/restart
- pm-cps: Block system suspend when a JTAG probe is present
- Expand make help text for generic defconfigs
- Refactor handling of legacy defconfigs
- Determine the entry point from the ELF file header to fix microMIPS
for certain toolchains
- Introduce isa-rev.h for MIPS_ISA_REV and use to simplify other code
Minor cleanups:
- DTS: boston/ci20: Unit name cleanups and correction
- kdump: Make the default for PHYSICAL_START always 64-bit
- Constify gpio_led in Alchemy, AR7, and TXX9
- Silence a couple of W=1 warnings
- Remove duplicate includes
Platform support:
ath79:
- Fix AR724X_PLL_REG_PCIE_CONFIG offset
BCM47xx:
- FIRMWARE: Use mac_pton() for MAC address parsing
- Add Luxul XAP1500/XWR1750 WiFi LEDs
- Use standard reset button for Luxul XWR-1750
BMIPS:
- Enable CONFIG_BRCMSTB_PM in bmips_stb_defconfig for build coverage
- Add STB PM, wake-up timer, watchdog DT nodes
Generic platform:
- Add support for Microsemi Ocelot
- dt-bindings: Add vendor prefix for Microsemi Corporation
- dt-bindings: Add bindings for Microsemi SoCs
- Add ocelot SoC & PCB123 board DTS files
- MAINTAINERS: Add entry for Microsemi MIPS SoCs
- Enable crc32-mips on r6 configs
Octeon:
- Drop '.' after newlines in printk calls
ralink:
- pci-mt7621: Enable PCIe on MT7688
-----BEGIN PGP SIGNATURE-----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=4vUc
-----END PGP SIGNATURE-----
Merge tag 'mips_4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips
Pull MIPS updates from James Hogan:
"These are the main MIPS changes for 4.17. Rough overview:
(1) generic platform: Add support for Microsemi Ocelot SoCs
(2) crypto: Add CRC32 and CRC32C HW acceleration module
(3) Various cleanups and misc improvements
More detailed summary:
Miscellaneous:
- hang more efficiently on halt/powerdown/restart
- pm-cps: Block system suspend when a JTAG probe is present
- expand make help text for generic defconfigs
- refactor handling of legacy defconfigs
- determine the entry point from the ELF file header to fix microMIPS
for certain toolchains
- introduce isa-rev.h for MIPS_ISA_REV and use to simplify other code
Minor cleanups:
- DTS: boston/ci20: Unit name cleanups and correction
- kdump: Make the default for PHYSICAL_START always 64-bit
- constify gpio_led in Alchemy, AR7, and TXX9
- silence a couple of W=1 warnings
- remove duplicate includes
Platform support:
Generic platform:
- add support for Microsemi Ocelot
- dt-bindings: Add vendor prefix for Microsemi Corporation
- dt-bindings: Add bindings for Microsemi SoCs
- add ocelot SoC & PCB123 board DTS files
- MAINTAINERS: Add entry for Microsemi MIPS SoCs
- enable crc32-mips on r6 configs
ath79:
- fix AR724X_PLL_REG_PCIE_CONFIG offset
BCM47xx:
- firmware: Use mac_pton() for MAC address parsing
- add Luxul XAP1500/XWR1750 WiFi LEDs
- use standard reset button for Luxul XWR-1750
BMIPS:
- enable CONFIG_BRCMSTB_PM in bmips_stb_defconfig for build coverage
- add STB PM, wake-up timer, watchdog DT nodes
Octeon:
- drop '.' after newlines in printk calls
ralink:
- pci-mt7621: Enable PCIe on MT7688"
* tag 'mips_4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: (37 commits)
MIPS: BCM47XX: Use standard reset button for Luxul XWR-1750
MIPS: BCM47XX: Add Luxul XAP1500/XWR1750 WiFi LEDs
MIPS: Make the default for PHYSICAL_START always 64-bit
MIPS: Use the entry point from the ELF file header
MAINTAINERS: Add entry for Microsemi MIPS SoCs
MIPS: generic: Add support for Microsemi Ocelot
MIPS: mscc: Add ocelot PCB123 device tree
MIPS: mscc: Add ocelot dtsi
dt-bindings: mips: Add bindings for Microsemi SoCs
dt-bindings: Add vendor prefix for Microsemi Corporation
MIPS: ath79: Fix AR724X_PLL_REG_PCIE_CONFIG offset
MIPS: pci-mt7620: Enable PCIe on MT7688
MIPS: pm-cps: Block system suspend when a JTAG probe is present
MIPS: VDSO: Replace __mips_isa_rev with MIPS_ISA_REV
MIPS: BPF: Replace __mips_isa_rev with MIPS_ISA_REV
MIPS: cpu-features.h: Replace __mips_isa_rev with MIPS_ISA_REV
MIPS: Introduce isa-rev.h to define MIPS_ISA_REV
MIPS: Hang more efficiently on halt/powerdown/restart
FIRMWARE: bcm47xx_nvram: Replace mac address parsing
MIPS: BMIPS: Add Broadcom STB watchdog nodes
...
- VHE optimizations
- EL2 address space randomization
- speculative execution mitigations ("variant 3a", aka execution past invalid
privilege register access)
- bugfixes and cleanups
PPC:
- improvements for the radix page fault handler for HV KVM on POWER9
s390:
- more kvm stat counters
- virtio gpu plumbing
- documentation
- facilities improvements
x86:
- support for VMware magic I/O port and pseudo-PMCs
- AMD pause loop exiting
- support for AMD core performance extensions
- support for synchronous register access
- expose nVMX capabilities to userspace
- support for Hyper-V signaling via eventfd
- use Enlightened VMCS when running on Hyper-V
- allow userspace to disable MWAIT/HLT/PAUSE vmexits
- usual roundup of optimizations and nested virtualization bugfixes
Generic:
- API selftest infrastructure (though the only tests are for x86 as of now)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJay19UAAoJEL/70l94x66DGKYIAIu9PTHAEwaX0et15fPW5y2x
rrtS355lSAmMrPJ1nePRQ+rProD/1B0Kizj3/9O+B9OTKKRsorRYNa4CSu9neO2k
N3rdE46M1wHAPwuJPcYvh3iBVXtgbMayk1EK5aVoSXaMXEHh+PWZextkl+F+G853
kC27yDy30jj9pStwnEFSBszO9ua/URdKNKBATNx8WUP6d9U/dlfm5xv3Dc3WtKt2
UMGmog2wh0i7ecXo7hRkMK4R7OYP3ZxAexq5aa9BOPuFp+ZdzC/MVpN+jsjq2J/M
Zq6RNyA2HFyQeP0E9QgFsYS2BNOPeLZnT5Jg1z4jyiD32lAZ/iC51zwm4oNKcDM=
=bPlD
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- VHE optimizations
- EL2 address space randomization
- speculative execution mitigations ("variant 3a", aka execution past
invalid privilege register access)
- bugfixes and cleanups
PPC:
- improvements for the radix page fault handler for HV KVM on POWER9
s390:
- more kvm stat counters
- virtio gpu plumbing
- documentation
- facilities improvements
x86:
- support for VMware magic I/O port and pseudo-PMCs
- AMD pause loop exiting
- support for AMD core performance extensions
- support for synchronous register access
- expose nVMX capabilities to userspace
- support for Hyper-V signaling via eventfd
- use Enlightened VMCS when running on Hyper-V
- allow userspace to disable MWAIT/HLT/PAUSE vmexits
- usual roundup of optimizations and nested virtualization bugfixes
Generic:
- API selftest infrastructure (though the only tests are for x86 as
of now)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (174 commits)
kvm: x86: fix a prototype warning
kvm: selftests: add sync_regs_test
kvm: selftests: add API testing infrastructure
kvm: x86: fix a compile warning
KVM: X86: Add Force Emulation Prefix for "emulate the next instruction"
KVM: X86: Introduce handle_ud()
KVM: vmx: unify adjacent #ifdefs
x86: kvm: hide the unused 'cpu' variable
KVM: VMX: remove bogus WARN_ON in handle_ept_misconfig
Revert "KVM: X86: Fix SMRAM accessing even if VM is shutdown"
kvm: Add emulation for movups/movupd
KVM: VMX: raise internal error for exception during invalid protected mode state
KVM: nVMX: Optimization: Dont set KVM_REQ_EVENT when VMExit with nested_run_pending
KVM: nVMX: Require immediate-exit when event reinjected to L2 and L1 event pending
KVM: x86: Fix misleading comments on handling pending exceptions
KVM: x86: Rename interrupt.pending to interrupt.injected
KVM: VMX: No need to clear pending NMI/interrupt on inject realmode interrupt
x86/kvm: use Enlightened VMCS when running on Hyper-V
x86/hyper-v: detect nested features
x86/hyper-v: define struct hv_enlightened_vmcs and clean field bits
...
The original patch submitted for support of the Luxul XWR-1750 used a
non-standard button handler for the reset button. This patch will allow
using the standard KEY_RESTART
Signed-off-by: Dan Haab <dan.haab@luxul.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18981/
Signed-off-by: James Hogan <jhogan@kernel.org>
Thanks to commit 4b3ef9daa4 ("mm/swap: split swap cache into 64MB
trunks"), after swapoff the address_space associated with the swap
device will be freed. So page_mapping() users which may touch the
address_space need some kind of mechanism to prevent the address_space
from being freed during accessing.
The dcache flushing functions (flush_dcache_page(), etc) in architecture
specific code may access the address_space of swap device for anonymous
pages in swap cache via page_mapping() function. But in some cases
there are no mechanisms to prevent the swap device from being swapoff,
for example,
CPU1 CPU2
__get_user_pages() swapoff()
flush_dcache_page()
mapping = page_mapping()
... exit_swap_address_space()
... kvfree(spaces)
mapping_mapped(mapping)
The address space may be accessed after being freed.
But from cachetlb.txt and Russell King, flush_dcache_page() only care
about file cache pages, for anonymous pages, flush_anon_page() should be
used. The implementation of flush_dcache_page() in all architectures
follows this too. They will check whether page_mapping() is NULL and
whether mapping_mapped() is true to determine whether to flush the
dcache immediately. And they will use interval tree (mapping->i_mmap)
to find all user space mappings. While mapping_mapped() and
mapping->i_mmap isn't used by anonymous pages in swap cache at all.
So, to fix the race between swapoff and flush dcache, __page_mapping()
is add to return the address_space for file cache pages and NULL
otherwise. All page_mapping() invoking in flush dcache functions are
replaced with page_mapping_file().
[akpm@linux-foundation.org: simplify page_mapping_file(), per Mike]
Link: http://lkml.kernel.org/r/20180305083634.15174-1-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Chen Liqin <liqin.linux@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Zankel <chris@zankel.net>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Calling __stack_chk_guard_setup() in decompress_kernel() is too late
that stack checking always fails for decompress_kernel() itself. So
remove __stack_chk_guard_setup() and initialize __stack_chk_guard before
we call decompress_kernel().
Original code comes from ARM but also used for MIPS and SH, so fix them
together. If without this fix, compressed booting of these archs will
fail because stack checking is enabled by default (>=4.16).
Link: http://lkml.kernel.org/r/1522226933-29317-1-git-send-email-chenhc@lemote.com
Fixes: 8779657d29 ("stackprotector: Introduce CONFIG_CC_STACKPROTECTOR_STRONG")
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Acked-by: James Hogan <jhogan@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Rich Felker <dalias@libc.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here is the big set of USB and PHY driver patches for 4.17-rc1.
Lots of USB typeC work happened this round, with code moving from the
staging directory into the "real" part of the kernel, as well as new
infrastructure being added to be able to handle the different types of
"roles" that typeC requires.
There is also the normal huge set of USB gadget controller and driver
updates, along with XHCI changes, and a raft of other tiny fixes all
over the USB tree. And the PHY driver updates are merged in here as
well as they interacted with the USB drivers in some places.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWsSpJw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylGawCdED2xS3HUxOIqfh81d8B1py8ji04AoJXdLAsH
JgwXbdbibZBabYTVi5s5
=LrRH
-----END PGP SIGNATURE-----
Merge tag 'usb-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/PHY updates from Greg KH:
"Here is the big set of USB and PHY driver patches for 4.17-rc1.
Lots of USB typeC work happened this round, with code moving from the
staging directory into the "real" part of the kernel, as well as new
infrastructure being added to be able to handle the different types of
"roles" that typeC requires.
There is also the normal huge set of USB gadget controller and driver
updates, along with XHCI changes, and a raft of other tiny fixes all
over the USB tree. And the PHY driver updates are merged in here as
well as they interacted with the USB drivers in some places.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (250 commits)
Revert "USB: serial: ftdi_sio: add Id for Physik Instrumente E-870"
usb: musb: gadget: misplaced out of bounds check
usb: chipidea: imx: Fix ULPI on imx53
usb: chipidea: imx: Cleanup ci_hdrc_imx_platform_flag
usb: chipidea: usbmisc: small clean up
usb: chipidea: usbmisc: evdo can be set e/o reset
usb: chipidea: usbmisc: evdo is only specific to OTG port
USB: serial: ftdi_sio: add Id for Physik Instrumente E-870
usb: dwc3: gadget: never call ->complete() from ->ep_queue()
usb: gadget: udc: core: update usb_ep_queue() documentation
usb: host: Remove the deprecated ATH79 USB host config options
usb: roles: Fix return value check in intel_xhci_usb_probe()
USB: gadget: f_midi: fixing a possible double-free in f_midi
usb: core: Add USB_QUIRK_DELAY_CTRL_MSG to usbcore quirks
usb: core: Copy parameter string correctly and remove superfluous null check
USB: announce bcdDevice as well as idVendor, idProduct.
USB:fix USB3 devices behind USB3 hubs not resuming at hibernate thaw
usb: hub: Reduce warning to notice on power loss
USB: serial: ftdi_sio: add support for Harman FirmwareHubEmulator
USB: serial: cp210x: add ELDAT Easywave RX09 id
...
A quiet release for SPI, some fixes and small updates for individual
drivers with one bigger change from Linus Walleij which coverts the
bitbanging SPI driver to use the GPIO descriptor API from Linus Walleij.
Since GPIO descriptors were used by platform data this means there's a
few changes in arch/ making relevant updates for a few platforms and one
misc driver that are affected.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlrCYDYTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0DXhB/9Hueo2D1Pku0iAwq+yIAPvk2N0fyGP
YWJWbDQGngSZEnU3dUzdfaOHh4MMiMgs0q8hxOYnmkIhhTs7cXsPj8x6rlZP8bee
TtSEEgHSuHlVWyADquFIel8OCq8BWd7p4aQKqP3LaojCH/wqswxtn4I+RH/xw1Rd
LIPgU12fxGUpRMO7uGNiMhqqkQDH1ZBFzCUYRPqQk2E+5hyZraQYoROgZkEBPzb1
EWjLxLxytj/Zj4N5eQkW4BWfX5HKJb9CpwKIIdyNuybr14yC5FR83VxOf9wW4/pG
39DIn8LtGTkuMRF4Yw5rPlC9KqnLpUDTnQCcOW4lt+z8QtZQ+LP3boxE
=xNln
-----END PGP SIGNATURE-----
Merge tag 'spi-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull SPI updates from Mark Brown:
"A quiet release for SPI, some fixes and small updates for individual
drivers with one bigger change from Linus Walleij which coverts the
bitbanging SPI driver to use the GPIO descriptor API from Linus
Walleij.
Since GPIO descriptors were used by platform data this means there's a
few changes in arch/ making relevant updates for a few platforms and
one misc driver that are affected"
* tag 'spi-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (24 commits)
MAINTAINERS: update Andi's e-mail
spi: spi-atmel: Use correct enum for DMA transfer direction
spi: sh-msiof: Document R-Car M3-N support
spi: sh-msiof: Use correct enum for DMA transfer direction
spi: sprd: Add the support of restarting the system
spi: sprd: Simplify the transfer function
spi: Fix unregistration of controller with fixed SPI bus number
spi: rspi: use correct enum for DMA transfer direction
spi: jcore: disable ref_clk after getting its rate
spi: bcm-qspi: fIX some error handling paths
spi: pxa2xx: Disable runtime PM if controller registration fails
spi: tegra20-slink: use true and false for boolean values
spi: Fix scatterlist elements size in spi_map_buf
spi: atmel: init FIFOs before spi enable
spi: orion: Prepare space for per-child options
spi: orion: Make the error message greppable
spi: orion: Rework GPIO CS handling
spi: bcm2835aux: Avoid 64-bit arithmetic in xfer len calc
spi: spi-gpio: Augment device tree bindings
spi: spi-gpio: Rewrite to use GPIO descriptors
...
Pull removal of in-kernel calls to syscalls from Dominik Brodowski:
"System calls are interaction points between userspace and the kernel.
Therefore, system call functions such as sys_xyzzy() or
compat_sys_xyzzy() should only be called from userspace via the
syscall table, but not from elsewhere in the kernel.
At least on 64-bit x86, it will likely be a hard requirement from
v4.17 onwards to not call system call functions in the kernel: It is
better to use use a different calling convention for system calls
there, where struct pt_regs is decoded on-the-fly in a syscall wrapper
which then hands processing over to the actual syscall function. This
means that only those parameters which are actually needed for a
specific syscall are passed on during syscall entry, instead of
filling in six CPU registers with random user space content all the
time (which may cause serious trouble down the call chain). Those
x86-specific patches will be pushed through the x86 tree in the near
future.
Moreover, rules on how data may be accessed may differ between kernel
data and user data. This is another reason why calling sys_xyzzy() is
generally a bad idea, and -- at most -- acceptable in arch-specific
code.
This patchset removes all in-kernel calls to syscall functions in the
kernel with the exception of arch/. On top of this, it cleans up the
three places where many syscalls are referenced or prototyped, namely
kernel/sys_ni.c, include/linux/syscalls.h and include/linux/compat.h"
* 'syscalls-next' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux: (109 commits)
bpf: whitelist all syscalls for error injection
kernel/sys_ni: remove {sys_,sys_compat} from cond_syscall definitions
kernel/sys_ni: sort cond_syscall() entries
syscalls/x86: auto-create compat_sys_*() prototypes
syscalls: sort syscall prototypes in include/linux/compat.h
net: remove compat_sys_*() prototypes from net/compat.h
syscalls: sort syscall prototypes in include/linux/syscalls.h
kexec: move sys_kexec_load() prototype to syscalls.h
x86/sigreturn: use SYSCALL_DEFINE0
x86: fix sys_sigreturn() return type to be long, not unsigned long
x86/ioport: add ksys_ioperm() helper; remove in-kernel calls to sys_ioperm()
mm: add ksys_readahead() helper; remove in-kernel calls to sys_readahead()
mm: add ksys_mmap_pgoff() helper; remove in-kernel calls to sys_mmap_pgoff()
mm: add ksys_fadvise64_64() helper; remove in-kernel call to sys_fadvise64_64()
fs: add ksys_fallocate() wrapper; remove in-kernel calls to sys_fallocate()
fs: add ksys_p{read,write}64() helpers; remove in-kernel calls to syscalls
fs: add ksys_truncate() wrapper; remove in-kernel calls to sys_truncate()
fs: add ksys_sync_file_range helper(); remove in-kernel calls to syscall
kernel: add ksys_setsid() helper; remove in-kernel call to sys_setsid()
kernel: add ksys_unshare() helper; remove in-kernel calls to sys_unshare()
...
Pull x86 dma mapping updates from Ingo Molnar:
"This tree, by Christoph Hellwig, switches over the x86 architecture to
the generic dma-direct and swiotlb code, and also unifies more of the
dma-direct code between architectures. The now unused x86-only
primitives are removed"
* 'x86-dma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
dma-mapping: Don't clear GFP_ZERO in dma_alloc_attrs
swiotlb: Make swiotlb_{alloc,free}_buffer depend on CONFIG_DMA_DIRECT_OPS
dma/swiotlb: Remove swiotlb_{alloc,free}_coherent()
dma/direct: Handle force decryption for DMA coherent buffers in common code
dma/direct: Handle the memory encryption bit in common code
dma/swiotlb: Remove swiotlb_set_mem_attributes()
set_memory.h: Provide set_memory_{en,de}crypted() stubs
x86/dma: Remove dma_alloc_coherent_gfp_flags()
iommu/intel-iommu: Enable CONFIG_DMA_DIRECT_OPS=y and clean up intel_{alloc,free}_coherent()
iommu/amd_iommu: Use CONFIG_DMA_DIRECT_OPS=y and dma_direct_{alloc,free}()
x86/dma/amd_gart: Use dma_direct_{alloc,free}()
x86/dma/amd_gart: Look at dev->coherent_dma_mask instead of GFP_DMA
x86/dma: Use generic swiotlb_ops
x86/dma: Use DMA-direct (CONFIG_DMA_DIRECT_OPS=y)
x86/dma: Remove dma_alloc_coherent_mask()
Pull wait_var_event updates from Ingo Molnar:
"This introduces the new wait_var_event() API, which is a more flexible
waiting primitive than wait_on_atomic_t().
All wait_on_atomic_t() users are migrated over to the new API and
wait_on_atomic_t() is removed. The migration fixes one bug and should
result in no functional changes for the other usecases"
* 'sched-wait-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/wait: Improve __var_waitqueue() code generation
sched/wait: Remove the wait_on_atomic_t() API
sched/wait, arch/mips: Fix and convert wait_on_atomic_t() usage to the new wait_var_event() API
sched/wait, fs/ocfs2: Convert wait_on_atomic_t() usage to the new wait_var_event() API
sched/wait, fs/nfs: Convert wait_on_atomic_t() usage to the new wait_var_event() API
sched/wait, fs/fscache: Convert wait_on_atomic_t() usage to the new wait_var_event() API
sched/wait, fs/btrfs: Convert wait_on_atomic_t() usage to the new wait_var_event() API
sched/wait, fs/afs: Convert wait_on_atomic_t() usage to the new wait_var_event() API
sched/wait, drivers/media: Convert wait_on_atomic_t() usage to the new wait_var_event() API
sched/wait, drivers/drm: Convert wait_on_atomic_t() usage to the new wait_var_event() API
sched/wait: Introduce wait_var_event()
Using this helper allows us to avoid the in-kernel calls to the
sys_readahead() syscall. The ksys_ prefix denotes that this function is
meant as a drop-in replacement for the syscall. In particular, it uses the
same calling convention as sys_readahead().
This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mm@kvack.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Using this helper allows us to avoid the in-kernel calls to the
sys_mmap_pgoff() syscall. The ksys_ prefix denotes that this function is
meant as a drop-in replacement for the syscall. In particular, it uses the
same calling convention as sys_mmap_pgoff().
This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mm@kvack.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Using the ksys_fadvise64_64() helper allows us to avoid the in-kernel
calls to the sys_fadvise64_64() syscall. The ksys_ prefix denotes that
this function is meant as a drop-in replacement for the syscall. In
particular, it uses the same calling convention as ksys_fadvise64_64().
Some compat stubs called sys_fadvise64(), which then just passed through
the arguments to sys_fadvise64_64(). Get rid of this indirection, and call
ksys_fadvise64_64() directly.
This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mm@kvack.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Using the ksys_fallocate() wrapper allows us to get rid of in-kernel
calls to the sys_fallocate() syscall. The ksys_ prefix denotes that this
function is meant as a drop-in replacement for the syscall. In
particular, it uses the same calling convention as sys_fallocate().
This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Using the ksys_p{read,write}64() wrappers allows us to get rid of
in-kernel calls to the sys_pread64() and sys_pwrite64() syscalls.
The ksys_ prefix denotes that this function is meant as a drop-in
replacement for the syscall. In particular, it uses the same calling
convention as sys_p{read,write}64().
This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Using the ksys_truncate() wrapper allows us to get rid of in-kernel
calls to the sys_truncate() syscall. The ksys_ prefix denotes that this
function is meant as a drop-in replacement for the syscall. In
particular, it uses the same calling convention as sys_truncate().
This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Using this helper allows us to avoid the in-kernel calls to the
sys_sync_file_range() syscall. The ksys_ prefix denotes that this function
is meant as a drop-in replacement for the syscall. In particular, it uses
the same calling convention as sys_sync_file_range().
This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Using the ksys_ftruncate() wrapper allows us to get rid of in-kernel
calls to the sys_ftruncate() syscall. The ksys_ prefix denotes that this
function is meant as a drop-in replacement for the syscall. In
particular, it uses the same calling convention as sys_ftruncate().
This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Some Luxul devices use PCIe connected GPIO LEDs that are not available
until the PCI subsytem and its drivers load. Using the same array for
these LEDs would block registering any LEDs until all GPIOs become
available. This may be undesired behavior as some LEDs should be
available as early as possible (e.g. system status LED). This patch will
allow registering available LEDs while deferring these PCIe GPIO
connected 'extra' LEDs until they become available.
Signed-off-by: Dan Haab <dan.haab@luxul.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18952/
Signed-off-by: James Hogan <jhogan@kernel.org>
Make the default for PHYSICAL_START always 64-bit, ensuring that a
correct sign-extended value is used if a 32-bit image is loaded by a
64-bit system, and matching how the load address is set in platform
Makefile fragments (arch/mips/*/Platform) in the absence of the
PHYSICAL_START configuration option.
Of course PHYSICAL_START itself is a misnomer as the load address is
virtual rather than physical (or otherwise sign-extension would not
apply).
Fixes: 7aa1c8f47e ("MIPS: kdump: Add support")
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Maxim Uvarov <muvarov@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18939/
Signed-off-by: James Hogan <jhogan@kernel.org>
The options USB_EHCI_ATH79 and USB_OHCI_ATH79 only enable the
generic EHCI and OHCI platform drivers, and have been marked as
deprecated since 2012.
These can be safely removed if we make sure that USB_EHCI_ROOT_HUB_TT
still get enabled for the EHCI driver. This is now done be selecting
this option when the EHCI platform driver is enabled on the ATH79
platform.
Signed-off-by: Alban Bedel <albeu@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to fetch the correct entry point with the ISA bit included, for
use by non-ELF boot loaders, parse the output of `objdump -f' for the
start address recorded in the kernel executable itself, rather than
using `nm' to get the value of the `kernel_entry' symbol.
Sign-extend the address retrieved if 32-bit, so that execution is
correctly started on 64-bit processors as well. The tool always prints
the entry point using either 8 or 16 hexadecimal digits, matching the
address width (aka class) of the ELF file, even in the presence of
leading zeros.
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18912/
Signed-off-by: James Hogan <jhogan@kernel.org>
Since commit 3af5a67c86 ("MIPS: Fix early CM probing") the MT7621 has
not been able to boot.
This commit caused mips_cm_probe() to be called before
mt7621.c::proc_soc_init().
prom_soc_init() has a comment explaining that mips_cm_probe() "wipes out
the bootloader config" and means that configuration registers are no
longer available. It has some code to re-enable this config.
Before this re-enable code is run, the sysc register cannot be read, so
when SYSC_REG_CHIP_NAME0 is read, a garbage value is returned and
panic() is called.
If we move the config-repair code to the top of prom_soc_init(), the
registers can be read and boot can proceed.
Very occasionally, the first register read after the reconfiguration
returns garbage, so add a call to __sync().
Fixes: 3af5a67c86 ("MIPS: Fix early CM probing")
Signed-off-by: NeilBrown <neil@brown.name>
Reviewed-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: John Crispin <john@phrozen.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.5+
Patchwork: https://patchwork.linux-mips.org/patch/18859/
Signed-off-by: James Hogan <jhogan@kernel.org>
ralink_halt() does nothing that machine_halt() doesn't already do, so it
adds no value.
It actually causes incorrect behaviour due to the "unreachable()" at the
end. This tells the compiler that the end of the function will never be
reached, which isn't true. The compiler responds by not adding a
'return' instruction, so control simply moves on to whatever bytes come
afterwards in memory. In my tested, that was the ralink_restart()
function. This means that an attempt to 'halt' the machine would
actually cause a reboot.
So remove ralink_halt() so that a 'halt' really does halt.
Fixes: c06e836ada ("MIPS: ralink: adds reset code")
Signed-off-by: NeilBrown <neil@brown.name>
Cc: John Crispin <john@phrozen.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.9+
Patchwork: https://patchwork.linux-mips.org/patch/18851/
Signed-off-by: James Hogan <jhogan@kernel.org>
Add a device tree include file for the Microsemi Ocelot SoC.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Allan Nielsen <Allan.Nielsen@microsemi.com>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/18855/
Signed-off-by: James Hogan <jhogan@kernel.org>
Enable syscon to use it for the RCU MFD on Amazon SE as well.
The Amazon SE also has similar reset controller system as Danube and
XWAY and use their drivers mostly. As these drivers now need syscon also
activate the syscon subsystem for for Amazon SE.
Fixes: 2b6639d4c7 ("MIPS: lantiq: Enable MFD_SYSCON to be able to use it for the RCU MFD")
Signed-off-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.14+
Patchwork: https://patchwork.linux-mips.org/patch/18817/
Signed-off-by: James Hogan <jhogan@kernel.org>
On Danube and AR9 the USB core is connected though a AHB bus to the main
system cross bar, hence we need to enable the gating clock of the AHB
Bus as well to make the USB controller work.
Fixes: dea54fbad3 ("phy: Add an USB PHY driver for the Lantiq SoCs using the RCU module")
Signed-off-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.14+
Patchwork: https://patchwork.linux-mips.org/patch/18814/
Signed-off-by: James Hogan <jhogan@kernel.org>
On Danube the USB0 controller registers are at 1e101000 and the USB0 PHY
register is at 1f203018 similar to all other lantiq SoCs. Activate the
USB controller gating clock thorough the USB controller driver and not
the PHY.
This fixes a problem introduced in a previous commit.
Fixes: dea54fbad3 ("phy: Add an USB PHY driver for the Lantiq SoCs using the RCU module")
Signed-off-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.14+
Patchwork: https://patchwork.linux-mips.org/patch/18816/
Signed-off-by: James Hogan <jhogan@kernel.org>
Give the basic phys_to_dma() and dma_to_phys() helpers a __-prefix and add
the memory encryption mask to the non-prefixed versions. Use the
__-prefixed versions directly instead of clearing the mask again in
various places.
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Muli Ben-Yehuda <mulix@mulix.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: iommu@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/20180319103826.12853-13-hch@lst.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The old wait_on_atomic_t() is going to get removed, use the more
flexible wait_var_event() API instead.
And while there, fix a bug and add the missing wakeup...
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
According to the QCA u-boot source the "PCIE Phase Lock Loop
Configuration (PCIE_PLL_CONFIG)" register is for all SoCs except the
QCA955X and QCA956X at offset 0x10.
Since the PCIE PLL config register is only defined for the AR724x fix
only this value. The value is wrong since the day it was added and isn't
used by any driver yet.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16048/
Signed-off-by: James Hogan <jhogan@kernel.org>
Now that all the grouping is done with RB trees, we no longer need
group_entry and can replace the whole thing with sibling_list.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: Dmitri Prokhorov <Dmitry.Prohorov@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Valery Cherepennikov <valery.cherepennikov@intel.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
If a JTAG probe is connected to a MIPS cluster, then the CPC detects it
and latches the CPC.STAT_CONF.EJTAG_PROBE bit to 1. While set,
attempting to send a power-down command to a core will be blocked, and
the CPC will instead send the core to clock-off state. This can
interfere with systems fully entering a low power state where all cores,
CM, GIC, etc are powered down.
Detect that a JTAG probe is / has been connected to the cluster and
block the suspend attempt.
Attempting to suspend the system while a JTAG probe is connected now
yields:
# echo mem > /sys/power/state
[ 11.654000] PM: Syncing filesystems ... done.
[ 11.658000] JTAG probe is connected - abort suspend
-sh: echo: write error: Operation not permitted
#
To restore suspend, the JTAG probe should be disconnected or put into
quiescent state. Platform code can then clear the
CPC.STAT_CONF.EJTAG_PROBE bit.
Reported-by: Ed Blake <ed.blake@sondrel.com>
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18641/
Signed-off-by: James Hogan <jhogan@kernel.org>
Remove the need to check that __mips_isa_rev is defined by using the
newly added MIPS_ISA_REV.
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18678/
Signed-off-by: James Hogan <jhogan@kernel.org>
Remove the need to check that __mips_isa_rev is defined by using the
newly added MIPS_ISA_REV.
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18677/
Signed-off-by: James Hogan <jhogan@kernel.org>
Remove the need to check that __mips_isa_rev is defined by using the
newly added MIPS_ISA_REV.
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: "Maciej W. Rozycki" <macro@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18675/
Signed-off-by: James Hogan <jhogan@kernel.org>
There are multiple instances in the kernel where we need to include or
exclude particular instructions based on the ISA revision of the target
processor. For MIPS32 / MIPS64, the compiler exports a __mips_isa_rev
define. However, when targeting MIPS I - V, this define is absent. This
leads to each use of __mips_isa_rev having to check that it is defined
first. To simplify this, introduce the isa-rev.h header which always
exports MIPS_ISA_REV. The name is changed so as to avoid confusion with
the compiler builtin and to avoid accidentally using the builtin.
MIPS_ISA_REV is defined to the compilers builtin if provided, or 0,
which satisfies all current usages.
Suggested-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Reviewed-by: Maciej W. Rozycki <macro@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18676/
Signed-off-by: James Hogan <jhogan@kernel.org>
The generic MIPS implementations of halting, powering down or restarting
the system all hang using a busy loop as a last resort. We have many
platforms which avoid this loop by implementing their own, many using
some variation upon executing a wait instruction to lower CPU power
usage if we reach this point.
In order to prepare for cleaning up these various custom implementations
of the same thing, this patch makes the generic machine_halt(),
machine_power_off() & machine_restart() functions each make use of the
wait instruction to lower CPU power usage in cases where we know that
the wait instruction is available. If wait isn't known to be supported
then we fall back to calling cpu_wait(), and if we don't have a
cpu_wait() callback then we effectively continue using a busy loop.
In effect the new machine_hang() function provides a superset of the
functionality that the various platforms currently provide differing
subsets of.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17178/
Signed-off-by: James Hogan <jhogan@kernel.org>
This patch introduces kvm_para_has_hint() to query for hints about
the configuration of the guests. The first hint KVM_HINTS_DEDICATED,
is set if the guest has dedicated physical CPUs for each vCPU (i.e.
pinning and no over-commitment). This allows optimizing spinlocks
and tells the guest to avoid PV TLB flush.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Commit a3e6c1eff5 ("MIPS: IRQ: Fix disable_irq on CPU IRQs") fixes an
issue where disable_irq did not actually disable the irq. The bug caused
our IPIs to not be disabled, which actually is the correct behavior.
With the addition of commit a3e6c1eff5 ("MIPS: IRQ: Fix disable_irq on
CPU IRQs"), the IPIs were getting disabled going into suspend, thus
schedule_ipi() was not being called. This caused deadlocks where
schedulable task were not being scheduled and other cpus were waiting
for them to do something.
Add the IRQF_NO_SUSPEND flag so an irq_disable will not be called on the
IPIs during suspend.
Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Fixes: a3e6c1eff5 ("MIPS: IRQ: Fix disabled_irq on CPU IRQs")
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17385/
[jhogan@kernel.org: checkpatch: wrap long lines and fix commit refs]
Signed-off-by: James Hogan <jhogan@kernel.org>
Expand the MIPS Makefile help text to list generic board names, generic
defconfigs, and legacy defconfigs which have been converted to generic
and are still usable.
Here's a snippet of the new "make ARCH=mips help" output:
...
If you are targeting a system supported by generic kernels you may
configure the kernel for a given architecture target like so:
{micro32,32,64}{r1,r2,r6}{el,}_defconfig <BOARDS="list of boards">
Where BOARDS is some subset of the following:
boston
ni169445
ranchu
sead-3
xilfpga
Specifically the following generic default configurations are
supported:
32r1_defconfig - Build generic kernel for MIPS32 r1
32r1el_defconfig - Build generic kernel for MIPS32 r1 little endian
32r2_defconfig - Build generic kernel for MIPS32 r2
32r2el_defconfig - Build generic kernel for MIPS32 r2 little endian
32r6_defconfig - Build generic kernel for MIPS32 r6
32r6el_defconfig - Build generic kernel for MIPS32 r6 little endian
64r1_defconfig - Build generic kernel for MIPS64 r1
64r1el_defconfig - Build generic kernel for MIPS64 r1 little endian
64r2_defconfig - Build generic kernel for MIPS64 r2
64r2el_defconfig - Build generic kernel for MIPS64 r2 little endian
64r6_defconfig - Build generic kernel for MIPS64 r6
64r6el_defconfig - Build generic kernel for MIPS64 r6 little endian
micro32r2_defconfig - Build generic kernel for microMIPS32 r2
micro32r2el_defconfig - Build generic kernel for microMIPS32 r2 little endian
The following legacy default configurations have been converted to
generic and can still be used:
sead3_defconfig - Build 32r2el_defconfig BOARDS=sead-3
sead3micro_defconfig - Build micro32r2el_defconfig BOARDS=sead-3
xilfpga_defconfig - Build 32r2el_defconfig BOARDS=xilfpga
...
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Matt Redfearn <matt.redfearn@mips.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kbuild@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/18598/
Commit 7a407aa5e0 ("MIPS: Push ARCH_MIGHT_HAVE_PC_SERIO down to
platform level") moves the global MIPS ARCH_MIGHT_HAVE_PC_SERIO select
down to various platforms, but doesn't add it to Loongson64 platforms
which need it, so add the selects to these platforms too.
Fixes: 7a407aa5e0 ("MIPS: Push ARCH_MIGHT_HAVE_PC_SERIO down to platform level")
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18704/
Signed-off-by: James Hogan <jhogan@kernel.org>
Commit a211a0820d ("MIPS: Push ARCH_MIGHT_HAVE_PC_PARPORT down to
platform level") moves the global MIPS ARCH_MIGHT_HAVE_PC_PARPORT select
down to various platforms, but doesn't add it to Loongson64 platforms
which need it, so add the selects to these platforms too.
Fixes: a211a0820d ("MIPS: Push ARCH_MIGHT_HAVE_PC_PARPORT down to platform level")
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18703/
Signed-off-by: James Hogan <jhogan@kernel.org>
A single MIPS fix for mismatching struct compat_flock, resulting in bus
errors starting Firefox on Debian 8 since 4.13.
-----BEGIN PGP SIGNATURE-----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=h/p9
-----END PGP SIGNATURE-----
Merge tag 'mips_fixes_4.16_3' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips
Pull MIPS fix from James Hogan:
"A single MIPS fix for mismatching struct compat_flock, resulting in
bus errors starting Firefox on Debian 8 since 4.13"
* tag 'mips_fixes_4.16_3' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips:
MIPS: Drop spurious __unused in struct compat_flock
The allocation of host_data is not null checked, leading to a null
pointer dereference if the allocation fails. Fix this by adding a null
check and return with -ENOMEM.
Fixes: 64b139f97c ("MIPS: OCTEON: irq: add CIB and other fixes")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: David Daney <david.daney@cavium.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: "Steven J. Hill" <Steven.Hill@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.0+
Patchwork: https://patchwork.linux-mips.org/patch/18658/
Signed-off-by: James Hogan <jhogan@kernel.org>
Currently there is no null check on a failed allocation of board_data,
and hence a null pointer dereference will occurr. Fix this by checking
for the out of memory null pointer.
Fixes: a747371748 ("MIPS: ath25: add board configuration detection")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.19+
Patchwork: https://patchwork.linux-mips.org/patch/18657/
Signed-off-by: James Hogan <jhogan@kernel.org>
The MIPS %.its.S compiler command did not define __ASSEMBLY__, which meant
when compiler_types.h was added to kconfig.h, unexpected things appeared
(e.g. struct declarations) which should not have been present. As done in
the general %.S compiler command, __ASSEMBLY__ is now included here too.
The failure was:
Error: arch/mips/boot/vmlinux.gz.its:201.1-2 syntax error
FATAL ERROR: Unable to parse input tree
/usr/bin/mkimage: Can't read arch/mips/boot/vmlinux.gz.itb.tmp: Invalid argument
/usr/bin/mkimage Can't add hashes to FIT blob
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: 28128c61e0 ("kconfig.h: Include compiler types to avoid missed struct attributes")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
MIPS' struct compat_flock doesn't match the 32-bit struct flock, as it
has an extra short __unused before pad[4], which combined with alignment
increases the size to 40 bytes compared with struct flock's 36 bytes.
Since commit 8c6657cb50 ("Switch flock copyin/copyout primitives to
copy_{from,to}_user()"), put_compat_flock() writes the full compat_flock
struct to userland, which results in corruption of the userland word
after the struct flock when running 32-bit userlands on 64-bit kernels.
This was observed to cause a bus error exception when starting Firefox
on Debian 8 (Jessie).
Reported-by: Peter Mamonov <pmamonov@gmail.com>
Signed-off-by: James Hogan <jhogan@kernel.org>
Tested-by: Peter Mamonov <pmamonov@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.13+
Patchwork: https://patchwork.linux-mips.org/patch/18646/
Define legacy defconfigs which have been converted to the generic
platform more programatically, so that they can be listed in the
Makefile help text and as a separate Makefile target without
duplication.
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Matt Redfearn <matt.redfearn@mips.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kbuild@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/18596/
Enable the crc32-mips module on MIPS generic r6 configs, where the
required MIPS r6 CRC instructions may be available.
As well as allowing the CRC instructions to be utilised, this should
also ensure the module gets some build coverage.
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Marcin Nowakowski <marcin.nowakowski@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18602/
This module registers crc32 and crc32c algorithms that use the
optional CRC32[bhwd] and CRC32C[bhwd] instructions in MIPSr6 cores.
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@mips.com>
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-mips@linux-mips.org
Cc: linux-crypto@vger.kernel.org
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Patchwork: https://patchwork.linux-mips.org/patch/18601/
[jhogan@kernel.org: Add CRYPTO_ALG_OPTIONAL_KEY flag on Eric Biggers'
suggestion, due to commit a208fa8f33 ("crypto: hash - annotate
algorithms taking optional key") in v4.16-rc1]
Indicate that CRC32 and CRC32C instuctions are supported by the CPU
through elf_hwcap flags.
This will be used by a follow-up commit that introduces crc32(c) crypto
acceleration modules and is required by GENERIC_CPU_AUTOPROBE feature.
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@mips.com>
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18600/
Rewrite the comparison in `else if` statement, case where `min_low_pfn >
ARCH_PFN_OFFSET` has already been checked in the first `if` statement:
if (min_low_pfn > ARCH_PFN_OFFSET) {
Fix non-fatal warning during compilation using W=1:
arch/mips/kernel/setup.c: In function ‘bootmem_init’:
arch/mips/kernel/setup.c:461:25: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
} else if (min_low_pfn < ARCH_PFN_OFFSET) {
^
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Reviewed-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18176/
Signed-off-by: James Hogan <jhogan@kernel.org>
The unit name was 8c00000 but since the reg property is declared as:
reg = <0x0 0x4c00000 0x1 0xfb400000>;
the unit name should have been instead 4c00000.
Tested on MIPS Creator CI20 (v1):
$ cat /sys/firmware/devicetree/.../partitions/partition@4c00000/label;echo
system
Reported-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/18529/
Signed-off-by: James Hogan <jhogan@kernel.org>
Improve the DTS files by removing all the leading "0x" and zeros to fix
the following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -E -i -e "s/@0x([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" -e "s/@0+([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" {} +
For simplicity, two sed expressions were used to solve each warnings
separately.
To make the regex expression more robust a few other issues were
resolved, namely setting unit-address to lower case, and adding a
whitespace before the the opening curly brace:
https://elinux.org/Device_Tree_Linux#Linux_conventions
This is a follow up to commit 4c9847b737 ("dt-bindings: Remove leading
0x from bindings notation")
Reported-by: David Daney <ddaney@caviumnetworks.com>
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/18528/
Signed-off-by: James Hogan <jhogan@kernel.org>
gpio_leds are not supposed to change at runtime. struct
gpio_led_platform_data contains a const struct gpio_led pointer since
v2.6.39, so mark the gpio_led structures const too.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18008/
[jhogan@kernel.org: improve commit message]
Signed-off-by: James Hogan <jhogan@kernel.org>
gpio_leds are not supposed to change at runtime. struct
gpio_led_platform_data contains a const struct gpio_led pointer since
v2.6.39, so mark the gpio_led structures const too.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18007/
[jhogan@kernel.org: improve commit message]
Signed-off-by: James Hogan <jhogan@kernel.org>
gpio_leds are not supposed to change at runtime. struct
gpio_led_platform_data contains a const struct gpio_led pointer since
v2.6.39, so mark the gpio_led structures const too.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18006/
[jhogan@kernel.org: improve commit message]
Signed-off-by: James Hogan <jhogan@kernel.org>
These duplicate includes have been found with scripts/checkincludes.pl
but they have been removed manually to avoid removing false positives.
Signed-off-by: Pravin Shedge <pravin.shedge4linux@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17920/
Signed-off-by: James Hogan <jhogan@kernel.org>
Using a period after a newline causes bad output.
Fixes: 64b139f97c ("MIPS: OCTEON: irq: add CIB and other fixes")
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17886/
Signed-off-by: James Hogan <jhogan@kernel.org>
A few fixes for outstanding MIPS issues:
- An __init section mismatch warning when brcmstb_pm is enabled.
- A regression handling multiple mem=X@Y arguments (4.11).
- A USB Kconfig select warning, and related sparc cleanup (4.16).
-----BEGIN PGP SIGNATURE-----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=BGD8
-----END PGP SIGNATURE-----
Merge tag 'mips_fixes_4.16_2' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips
Pull MIPS fixes from James Hogan:
"A few fixes for outstanding MIPS issues:
- an __init section mismatch warning when brcmstb_pm is enabled
- a regression handling multiple mem=X@Y arguments (4.11)
- a USB Kconfig select warning, and related sparc cleanup (4.16)"
* tag 'mips_fixes_4.16_2' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips:
sparc,leon: Select USB_UHCI_BIG_ENDIAN_{MMIO,DESC}
usb: Move USB_UHCI_BIG_ENDIAN_* out of USB_SUPPORT
MIPS: Fix incorrect mem=X@Y handling
MIPS: BMIPS: Fix section mismatch warning
This converts the bit-banged GPIO SPI driver to looking up and
using GPIO descriptors to get a handle on GPIO lines for SCK,
MOSI, MISO and all CS lines.
All existing board files are converted in one go to keep it all
consistent. With these conversions I rarely find any interrim
steps that makes any sense.
Device tree probing and GPIO handling should work like before
also after this patch.
For board files, we stop using controller data to pass the GPIO
line for chip select, instead we pass this as a GPIO descriptor
lookup like everything else.
In some s3c24xx machines the names of the SPI devices were set to
"spi-gpio" rather than "spi_gpio" which can never have worked, I
fixed it working (I guess) as part of this patch set. Sometimes
I wonder how this code got upstream in the first place, it
obviously is not tested.
mach-s3c64xx/mach-smartq.c has the same problem and additionally
defines the *same* GPIO line for MOSI and MISO which is not going
to be accepted by gpiolib. As the lines were number 1,2,2 I assumed
it was a typo and use lines 1,2,3. A comment gives awat that line 0
is chip select though no actual SPI device is provided for the LCD
supposed to be on this bit-banged SPI bus. I left it intact instead
of just deleting the bus though.
Kill off board file code that try to initialize the SPI lines
to the same values that they will later be set by the spi_gpio
driver anyways. Given the huge number of weird things in these
board files I do not think this code is very tested or put in
with much afterthought anyways.
In order to assert that we do not get performance regressions on
this crucial bing-banged driver, a ran a script like this dumping the
Ilitek ILI9322 regmap 10000 times (it has no caching obviously) on
an otherwise idle system in two iterations before and after the
patches:
#!/bin/sh
for run in `seq 10000`
do
cat /debug/regmap/spi0.0/registers > /dev/null
done
Before the patch:
time test.sh
real 3m 41.03s
user 0m 29.41s
sys 3m 7.22s
time test.sh
real 3m 44.24s
user 0m 32.31s
sys 3m 7.60s
After the patch:
time test.sh
real 3m 41.32s
user 0m 28.92s
sys 3m 8.08s
time test.sh
real 3m 39.92s
user 0m 30.20s
sys 3m 5.56s
So any performance differences seems to be in the error margin.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Olof Johansson <olof@lixom.net>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
A single change (and associated DT binding update) to allow the address
of the MIPS Cluster Power Controller (CPC) to be chosen by DT, which
allows SMP to work on generic MIPS kernels where the bootloader hasn't
configured the CPC address (i.e. the new Ranchu platform).
-----BEGIN PGP SIGNATURE-----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=E7mu
-----END PGP SIGNATURE-----
Merge tag 'mips_4.16_2' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips
Pull MIPS fix from James Hogan:
"A single change (and associated DT binding update) to allow the
address of the MIPS Cluster Power Controller (CPC) to be chosen by DT,
which allows SMP to work on generic MIPS kernels where the bootloader
hasn't configured the CPC address (i.e. the new Ranchu platform)"
* tag 'mips_4.16_2' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips:
MIPS: CPC: Map registers using DT in mips_cpc_default_phys_base()
dt-bindings: Document mti,mips-cpc binding
Commit 73fbc1eba7 ("MIPS: fix mem=X@Y commandline processing") added a
fix to ensure that the memory range between PHYS_OFFSET and low memory
address specified by mem= cmdline argument is not later processed by
free_all_bootmem. This change was incorrect for systems where the
commandline specifies more than 1 mem argument, as it will cause all
memory between PHYS_OFFSET and each of the memory offsets to be marked
as reserved, which results in parts of the RAM marked as reserved
(Creator CI20's u-boot has a default commandline argument 'mem=256M@0x0
mem=768M@0x30000000').
Change the behaviour to ensure that only the range between PHYS_OFFSET
and the lowest start address of the memories is marked as protected.
This change also ensures that the range is marked protected even if it's
only defined through the devicetree and not only via commandline
arguments.
Reported-by: Mathieu Malaterre <mathieu.malaterre@gmail.com>
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@mips.com>
Fixes: 73fbc1eba7 ("MIPS: fix mem=X@Y commandline processing")
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # v4.11+
Tested-by: Mathieu Malaterre <malat@debian.org>
Patchwork: https://patchwork.linux-mips.org/patch/18562/
Signed-off-by: James Hogan <jhogan@kernel.org>
Remove the __init annotation from bmips_cpu_setup() to avoid the
following warning.
WARNING: vmlinux.o(.text+0x35c950): Section mismatch in reference from the function brcmstb_pm_s3() to the function .init.text:bmips_cpu_setup()
The function brcmstb_pm_s3() references
the function __init bmips_cpu_setup().
This is often because brcmstb_pm_s3 lacks a __init
annotation or the annotation of bmips_cpu_setup is wrong.
Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: linux-mips@linux-mips.org
Reviewed-by: James Hogan <jhogan@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/18589/
Signed-off-by: James Hogan <jhogan@kernel.org>
except, again, POLLFREE and POLL_BUSY_LOOP.
With this, we finally get to the promised end result:
- POLL{IN,OUT,...} are plain integers and *not* in __poll_t, so any
stray instances of ->poll() still using those will be caught by
sparse.
- eventpoll.c and select.c warning-free wrt __poll_t
- no more kernel-side definitions of POLL... - userland ones are
visible through the entire kernel (and used pretty much only for
mangle/demangle)
- same behavior as after the first series (i.e. sparc et.al. epoll(2)
working correctly).
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:
for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
done
with de-mangling cleanups yet to come.
NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do. But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.
The next patch from Al will sort out the final differences, and we
should be all done.
Scripted-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ARM:
- Include icache invalidation optimizations, improving VM startup time
- Support for forwarded level-triggered interrupts, improving
performance for timers and passthrough platform devices
- A small fix for power-management notifiers, and some cosmetic changes
PPC:
- Add MMIO emulation for vector loads and stores
- Allow HPT guests to run on a radix host on POWER9 v2.2 CPUs without
requiring the complex thread synchronization of older CPU versions
- Improve the handling of escalation interrupts with the XIVE interrupt
controller
- Support decrement register migration
- Various cleanups and bugfixes.
s390:
- Cornelia Huck passed maintainership to Janosch Frank
- Exitless interrupts for emulated devices
- Cleanup of cpuflag handling
- kvm_stat counter improvements
- VSIE improvements
- mm cleanup
x86:
- Hypervisor part of SEV
- UMIP, RDPID, and MSR_SMI_COUNT emulation
- Paravirtualized TLB shootdown using the new KVM_VCPU_PREEMPTED bit
- Allow guests to see TOPOEXT, GFNI, VAES, VPCLMULQDQ, and more AVX512
features
- Show vcpu id in its anonymous inode name
- Many fixes and cleanups
- Per-VCPU MSR bitmaps (already merged through x86/pti branch)
- Stable KVM clock when nesting on Hyper-V (merged through x86/hyperv)
-----BEGIN PGP SIGNATURE-----
iQEcBAABCAAGBQJafvMtAAoJEED/6hsPKofo6YcH/Rzf2RmshrWaC3q82yfIV0Qz
Z8N8yJHSaSdc3Jo6cmiVj0zelwAxdQcyjwlT7vxt5SL2yML+/Q0st9Hc3EgGGXPm
Il99eJEl+2MYpZgYZqV8ff3mHS5s5Jms+7BITAeh6Rgt+DyNbykEAvzt+MCHK9cP
xtsIZQlvRF7HIrpOlaRzOPp3sK2/MDZJ1RBE7wYItK3CUAmsHim/LVYKzZkRTij3
/9b4LP1yMMbziG+Yxt1o682EwJB5YIat6fmDG9uFeEVI5rWWN7WFubqs8gCjYy/p
FX+BjpOdgTRnX+1m9GIj0Jlc/HKMXryDfSZS07Zy4FbGEwSiI5SfKECub4mDhuE=
=C/uD
-----END PGP SIGNATURE-----
Merge tag 'kvm-4.16-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Radim Krčmář:
"ARM:
- icache invalidation optimizations, improving VM startup time
- support for forwarded level-triggered interrupts, improving
performance for timers and passthrough platform devices
- a small fix for power-management notifiers, and some cosmetic
changes
PPC:
- add MMIO emulation for vector loads and stores
- allow HPT guests to run on a radix host on POWER9 v2.2 CPUs without
requiring the complex thread synchronization of older CPU versions
- improve the handling of escalation interrupts with the XIVE
interrupt controller
- support decrement register migration
- various cleanups and bugfixes.
s390:
- Cornelia Huck passed maintainership to Janosch Frank
- exitless interrupts for emulated devices
- cleanup of cpuflag handling
- kvm_stat counter improvements
- VSIE improvements
- mm cleanup
x86:
- hypervisor part of SEV
- UMIP, RDPID, and MSR_SMI_COUNT emulation
- paravirtualized TLB shootdown using the new KVM_VCPU_PREEMPTED bit
- allow guests to see TOPOEXT, GFNI, VAES, VPCLMULQDQ, and more
AVX512 features
- show vcpu id in its anonymous inode name
- many fixes and cleanups
- per-VCPU MSR bitmaps (already merged through x86/pti branch)
- stable KVM clock when nesting on Hyper-V (merged through
x86/hyperv)"
* tag 'kvm-4.16-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (197 commits)
KVM: PPC: Book3S: Add MMIO emulation for VMX instructions
KVM: PPC: Book3S HV: Branch inside feature section
KVM: PPC: Book3S HV: Make HPT resizing work on POWER9
KVM: PPC: Book3S HV: Fix handling of secondary HPTEG in HPT resizing code
KVM: PPC: Book3S PR: Fix broken select due to misspelling
KVM: x86: don't forget vcpu_put() in kvm_arch_vcpu_ioctl_set_sregs()
KVM: PPC: Book3S PR: Fix svcpu copying with preemption enabled
KVM: PPC: Book3S HV: Drop locks before reading guest memory
kvm: x86: remove efer_reload entry in kvm_vcpu_stat
KVM: x86: AMD Processor Topology Information
x86/kvm/vmx: do not use vm-exit instruction length for fast MMIO when running nested
kvm: embed vcpu id to dentry of vcpu anon inode
kvm: Map PFN-type memory regions as writable (if possible)
x86/kvm: Make it compile on 32bit and with HYPYERVISOR_GUEST=n
KVM: arm/arm64: Fixup userspace irqchip static key optimization
KVM: arm/arm64: Fix userspace_irqchip_in_use counting
KVM: arm/arm64: Fix incorrect timer_is_pending logic
MAINTAINERS: update KVM/s390 maintainers
MAINTAINERS: add Halil as additional vfio-ccw maintainer
MAINTAINERS: add David as a reviewer for KVM/s390
...
Makefile changes:
- enable unused-variable warning that was wrongly disabled for clang
Kconfig changes:
- warn blank 'help' and fix existing instances
- fix 'choice' behavior to not write out invisible symbols
- fix misc weirdness
Coccinell changes:
- fix false positive of free after managed memory alloc detection
- improve performance of NULL dereference detection
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=jy5l
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
"Makefile changes:
- enable unused-variable warning that was wrongly disabled for clang
Kconfig changes:
- warn about blank 'help' and fix existing instances
- fix 'choice' behavior to not write out invisible symbols
- fix misc weirdness
Coccinell changes:
- fix false positive of free after managed memory alloc detection
- improve performance of NULL dereference detection"
* tag 'kbuild-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (21 commits)
kconfig: remove const qualifier from sym_expand_string_value()
kconfig: add xrealloc() helper
kconfig: send error messages to stderr
kconfig: echo stdin to stdout if either is redirected
kconfig: remove check_stdin()
kconfig: remove 'config*' pattern from .gitignnore
kconfig: show '?' prompt even if no help text is available
kconfig: do not write choice values when their dependency becomes n
coccinelle: deref_null: avoid useless computation
coccinelle: devm_free: reduce false positives
kbuild: clang: disable unused variable warnings only when constant
kconfig: Warn if help text is blank
nios2: kconfig: Remove blank help text
arm: vt8500: kconfig: Remove blank help text
MIPS: kconfig: Remove blank help text
MIPS: BCM63XX: kconfig: Remove blank help text
lib/Kconfig.debug: Remove blank help text
Staging: rtl8192e: kconfig: Remove blank help text
Staging: rtl8192u: kconfig: Remove blank help text
mmc: kconfig: Remove blank help text
...
Reading mips_cpc_base value from the DT allows each platform to
define it according to its needs. This is especially convenient
for MIPS_GENERIC kernel where this kind of information should be
determined in runtime.
Use mti,mips-cpc compatible string with just a reg property to
specify the register location for your platform.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Miodrag Dinic <miodrag.dinic@mips.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@mips.com>
Cc: linux-mips@linux-mips.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/18513/
Signed-off-by: James Hogan <jhogan@kernel.org>
A couple of MIPS fixes for 4.16-rc1, including an important regression
in 4.15 and a rather more longstanding corner case build fix.
- Fix CPS regression on older binutils due to MIPS_ISA_LEVEL_RAW fix
(4.15)
- Fix allmodconfig + CONFIG_MACH_TX49XX=y builds due to incorrect use of
IS_ENABLED() (2.6.28)
-----BEGIN PGP SIGNATURE-----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=jeJr
-----END PGP SIGNATURE-----
Merge tag 'mips_fixes_4.16_1' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips
Pull MIPS fixes from James Hogan:
"A couple of MIPS fixes for 4.16-rc1, including an important regression
in 4.15 and a rather more longstanding corner case build fix.
These are separate from the main pull request as one of the bugs fixed
was only recently introduced in v4.15-rc8.
- Fix CPS regression on older binutils due to MIPS_ISA_LEVEL_RAW fix
(4.15)
- Fix allmodconfig + CONFIG_MACH_TX49XX=y builds due to incorrect use
of IS_ENABLED() (2.6.28)"
* tag 'mips_fixes_4.16_1' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips:
MIPS: TXx9: use IS_BUILTIN() for CONFIG_LEDS_CLASS
MIPS: CPS: Fix MIPS_ISA_LEVEL_RAW fallout
These are the main MIPS changes for 4.16. Rough overview:
- Basic support for the Ingenic JZ4770 based GCW Zero open-source
handheld video game console
- Support for the Ranchu board (used by Android emulator)
- Various cleanups and misc improvements
Fixes:
- Fix generic platform's USB_*HCI_BIG_ENDIAN selects (4.9)
- Fix vmlinuz default build when ZBOOT selected
- Fix clean up of vmlinuz targets
- Fix command line duplication (in preparation for Ingenic JZ4770)
Miscellaneous:
- Allow Processor ID reads to be to be optimised away by the compiler
(improves performance when running in guest)
- Push ARCH_MIGHT_HAVE_PC_SERIO/PARPORT down to platform level to
disable on generic platform with Ranchu board support
- Add helpers for assembler macro instructions for older assemblers
- Use assembler macro instructions to support VZ, XPA & MSA operations
on older assemblers, removing C wrapper duplication
- Various improvements to VZ & XPA assembly wrappers
- Add drivers/platform/mips/ to MIPS MAINTAINERS entry
Minor cleanups:
- Misc FPU emulation cleanups (removal of unnecessary include, moving
macros to common header, checkpatch and sparse fixes)
- Remove duplicate assignment of core in play_dead()
- Remove duplication in watchpoint handling
- Remove mips_dma_mapping_error() stub
- Use NULL instead of 0 in prepare_ftrace_return()
- Use proper kernel-doc Return keyword for
__compute_return_epc_for_insn()
- Remove duplicate semicolon in csum_fold()
Platform support:
Broadcom:
- Enable ZBOOT on BCM47xx
Generic platform:
- Add Ranchu board support, used by Android emulator
- Fix machine compatible string matching for Ranchu
- Support GIC in EIC mode
Ingenic platforms:
- Add DT, defconfig and other support for JZ4770 SoC and GCW Zero
- Support dynamnic machine types (i.e. JZ4740 / JZ4770 / JZ4780)
- Add Ingenic JZ4770 CGU clocks
- General Ingenic clk changes to prepare for JZ4770 SoC support
- Use common command line handling code
- Add DT vendor prefix to GCW (Game Consoles Worldwide)
Loongson:
- Add MAINTAINERS entry for Loongson2 and Loongson3 platforms
- Drop 32-bit support for Loongson 2E/2F devices
- Fix build failures due to multiple use of "MEM_RESERVED"
-----BEGIN PGP SIGNATURE-----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=7iwT
-----END PGP SIGNATURE-----
Merge tag 'mips_4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips
Pull MIPS updates from James Hogan:
"These are the main MIPS changes for 4.16.
Rough overview:
(1) Basic support for the Ingenic JZ4770 based GCW Zero open-source
handheld video game console
(2) Support for the Ranchu board (used by Android emulator)
(3) Various cleanups and misc improvements
More detailed summary:
Fixes:
- Fix generic platform's USB_*HCI_BIG_ENDIAN selects (4.9)
- Fix vmlinuz default build when ZBOOT selected
- Fix clean up of vmlinuz targets
- Fix command line duplication (in preparation for Ingenic JZ4770)
Miscellaneous:
- Allow Processor ID reads to be to be optimised away by the compiler
(improves performance when running in guest)
- Push ARCH_MIGHT_HAVE_PC_SERIO/PARPORT down to platform level to
disable on generic platform with Ranchu board support
- Add helpers for assembler macro instructions for older assemblers
- Use assembler macro instructions to support VZ, XPA & MSA
operations on older assemblers, removing C wrapper duplication
- Various improvements to VZ & XPA assembly wrappers
- Add drivers/platform/mips/ to MIPS MAINTAINERS entry
Minor cleanups:
- Misc FPU emulation cleanups (removal of unnecessary include, moving
macros to common header, checkpatch and sparse fixes)
- Remove duplicate assignment of core in play_dead()
- Remove duplication in watchpoint handling
- Remove mips_dma_mapping_error() stub
- Use NULL instead of 0 in prepare_ftrace_return()
- Use proper kernel-doc Return keyword for
__compute_return_epc_for_insn()
- Remove duplicate semicolon in csum_fold()
Platform support:
Broadcom:
- Enable ZBOOT on BCM47xx
Generic platform:
- Add Ranchu board support, used by Android emulator
- Fix machine compatible string matching for Ranchu
- Support GIC in EIC mode
Ingenic platforms:
- Add DT, defconfig and other support for JZ4770 SoC and GCW Zero
- Support dynamnic machine types (i.e. JZ4740 / JZ4770 / JZ4780)
- Add Ingenic JZ4770 CGU clocks
- General Ingenic clk changes to prepare for JZ4770 SoC support
- Use common command line handling code
- Add DT vendor prefix to GCW (Game Consoles Worldwide)
Loongson:
- Add MAINTAINERS entry for Loongson2 and Loongson3 platforms
- Drop 32-bit support for Loongson 2E/2F devices
- Fix build failures due to multiple use of 'MEM_RESERVED'"
* tag 'mips_4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: (53 commits)
MIPS: Malta: Sanitize mouse and keyboard configuration.
MIPS: Update defconfigs after previous patch.
MIPS: Push ARCH_MIGHT_HAVE_PC_SERIO down to platform level
MIPS: Push ARCH_MIGHT_HAVE_PC_PARPORT down to platform level
MIPS: SMP-CPS: Remove duplicate assignment of core in play_dead
MIPS: Generic: Support GIC in EIC mode
MIPS: generic: Fix Makefile alignment
MIPS: generic: Fix ranchu_of_match[] termination
MIPS: generic: Fix machine compatible matching
MIPS: Loongson fix name confict - MEM_RESERVED
MIPS: bcm47xx: enable ZBOOT support
MIPS: Fix trailing semicolon
MIPS: Watch: Avoid duplication of bits in mips_read_watch_registers
MIPS: Watch: Avoid duplication of bits in mips_install_watch_registers.
MIPS: MSA: Update helpers to use new asm macros
MIPS: XPA: Standardise readx/writex accessors
MIPS: XPA: Allow use of $0 (zero) to MTHC0
MIPS: XPA: Use XPA instructions in assembly
MIPS: VZ: Pass GC0 register names in $n format
MIPS: VZ: Update helpers to use new asm macros
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ttq9
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
- skip AER driver error recovery callbacks for correctable errors
reported via ACPI APEI, as we already do for errors reported via the
native path (Tyler Baicar)
- fix DPC shared interrupt handling (Alex Williamson)
- print full DPC interrupt number (Keith Busch)
- enable DPC only if AER is available (Keith Busch)
- simplify DPC code (Bjorn Helgaas)
- calculate ASPM L1 substate parameter instead of hardcoding it (Bjorn
Helgaas)
- enable Latency Tolerance Reporting for ASPM L1 substates (Bjorn
Helgaas)
- move ASPM internal interfaces out of public header (Bjorn Helgaas)
- allow hot-removal of VGA devices (Mika Westerberg)
- speed up unplug and shutdown by assuming Thunderbolt controllers
don't support Command Completed events (Lukas Wunner)
- add AtomicOps support for GPU and Infiniband drivers (Felix Kuehling,
Jay Cornwall)
- expose "ari_enabled" in sysfs to help NIC naming (Stuart Hayes)
- clean up PCI DMA interface usage (Christoph Hellwig)
- remove PCI pool API (replaced with DMA pool) (Romain Perier)
- deprecate pci_get_bus_and_slot(), which assumed PCI domain 0 (Sinan
Kaya)
- move DT PCI code from drivers/of/ to drivers/pci/ (Rob Herring)
- add PCI-specific wrappers for dev_info(), etc (Frederick Lawler)
- remove warnings on sysfs mmap failure (Bjorn Helgaas)
- quiet ROM validation messages (Alex Deucher)
- remove redundant memory alloc failure messages (Markus Elfring)
- fill in types for compile-time VGA and other I/O port resources
(Bjorn Helgaas)
- make "pci=pcie_scan_all" work for Root Ports as well as Downstream
Ports to help AmigaOne X1000 (Bjorn Helgaas)
- add SPDX tags to all PCI files (Bjorn Helgaas)
- quirk Marvell 9128 DMA aliases (Alex Williamson)
- quirk broken INTx disable on Ceton InfiniTV4 (Bjorn Helgaas)
- fix CONFIG_PCI=n build by adding dummy pci_irqd_intx_xlate() (Niklas
Cassel)
- use DMA API to get MSI address for DesignWare IP (Niklas Cassel)
- fix endpoint-mode DMA mask configuration (Kishon Vijay Abraham I)
- fix ARTPEC-6 incorrect IS_ERR() usage (Wei Yongjun)
- add support for ARTPEC-7 SoC (Niklas Cassel)
- add endpoint-mode support for ARTPEC (Niklas Cassel)
- add Cadence PCIe host and endpoint controller driver (Cyrille
Pitchen)
- handle multiple INTx status bits being set in dra7xx (Vignesh R)
- translate dra7xx hwirq range to fix INTD handling (Vignesh R)
- remove deprecated Exynos PHY initialization code (Jaehoon Chung)
- fix MSI erratum workaround for HiSilicon Hip06/Hip07 (Dongdong Liu)
- fix NULL pointer dereference in iProc BCMA driver (Ray Jui)
- fix Keystone interrupt-controller-node lookup (Johan Hovold)
- constify qcom driver structures (Julia Lawall)
- rework Tegra config space mapping to increase space available for
endpoints (Vidya Sagar)
- simplify Tegra driver by using bus->sysdata (Manikanta Maddireddy)
- remove PCI_REASSIGN_ALL_BUS usage on Tegra (Manikanta Maddireddy)
- add support for Global Fabric Manager Server (GFMS) event to
Microsemi Switchtec switch driver (Logan Gunthorpe)
- add IDs for Switchtec PSX 24xG3 and PSX 48xG3 (Kelvin Cao)
* tag 'pci-v4.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits)
PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller
dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe endpoint controller
PCI: endpoint: Fix EPF device name to support multi-function devices
PCI: endpoint: Add the function number as argument to EPC ops
PCI: cadence: Add host driver for Cadence PCIe controller
dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe host controller
PCI: Add vendor ID for Cadence
PCI: Add generic function to probe PCI host controllers
PCI: generic: fix missing call of pci_free_resource_list()
PCI: OF: Add generic function to parse and allocate PCI resources
PCI: Regroup all PCI related entries into drivers/pci/Makefile
PCI/DPC: Reformat DPC register definitions
PCI/DPC: Add and use DPC Status register field definitions
PCI/DPC: Squash dpc_rp_pio_get_info() into dpc_process_rp_pio_error()
PCI/DPC: Remove unnecessary RP PIO register structs
PCI/DPC: Push dpc->rp_pio_status assignment into dpc_rp_pio_get_info()
PCI/DPC: Squash dpc_rp_pio_print_error() into dpc_rp_pio_get_info()
PCI/DPC: Make RP PIO log size check more generic
PCI/DPC: Rename local "status" to "dpc_status"
PCI/DPC: Squash dpc_rp_pio_print_tlp_header() into dpc_rp_pio_print_error()
...
While rarely used the Malta has fully functional PS/2 mouse and keyboard
ports.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: James Hogan <jhogan@kernel.org>
Maybe once upon a time the select of ARCH_MIGHT_HAVE_PC_SERIO used to
make sense. These days MIPS platforms long have done away with i8042 or
PS/2 style keyboard and mouse ports and embedded systems probably never
had them anyway so push the select down to the level of individual
platforms.
Fixes: f2d0b0d5c1 ("MIPS: ranchu: Add Ranchu as a new generic-based board")
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: James Hogan <jhogan@kernel.org>
Maybe once upon a time the select of ARCH_MIGHT_HAVE_PC_PARPORT used to
make sense. These days MIPS platforms long have done away with parallel
ports and embedded systems probably never had one anyway so push the
select down to the level of individual platforms.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: James Hogan <jhogan@kernel.org>
The merge of commit f875a832d2 ("MIPS: Abstract CPU core & VP(E) ID
access through accessor functions") ended up creating a duplicate
assignment of core during the rebase on commit bac06cf0fb ("MIPS:
smp-cps: Fix potentially uninitialised value of core"). Remove the
duplicate.
Fixes: f875a832d2 ("MIPS: Abstract CPU core & VP(E) ID access through accessor functions")
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17955/
Signed-off-by: James Hogan <jhogan@kernel.org>
The GIC supports running in External Interrupt Controller (EIC) mode,
and will signal this via cpu_has_veic if enabled in hardware. Currently
the generic kernel will panic if cpu_has_veic is set - but the GIC can
legitimately set this flag if either configured to boot in EIC mode, or
if the GIC driver enables this mode. Make the kernel not panic in this
case, and instead just check if the GIC is present. If so, use it's CPU
local interrupt routing functions. If an EIC is present, but it is not
the GIC, then the kernel does not know how to get the VIRQ for the CPU
local interrupts and should panic. Support for alternative EICs being
present is needed here for the generic kernel to support them.
Suggested-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18191/
Signed-off-by: James Hogan <jhogan@kernel.org>
When commit b27311e1ca ("MIPS: TXx9: Add RBTX4939 board support")
added board support for the RBTX4939, it added a call to
led_classdev_register even if the LED class is built as a module.
Built-in arch code cannot call module code directly like this. Commit
b33b440737 ("MIPS: TXX9: use IS_ENABLED() macro") subsequently
changed the inclusion of this code to a single check that
CONFIG_LEDS_CLASS is either builtin or a module, but the same issue
remains.
This leads to MIPS allmodconfig builds failing when CONFIG_MACH_TX49XX=y
is set:
arch/mips/txx9/rbtx4939/setup.o: In function `rbtx4939_led_probe':
setup.c:(.init.text+0xc0): undefined reference to `of_led_classdev_register'
make: *** [Makefile:999: vmlinux] Error 1
Fix this by using the IS_BUILTIN() macro instead.
Fixes: b27311e1ca ("MIPS: TXx9: Add RBTX4939 board support")
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Reviewed-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18544/
Signed-off-by: James Hogan <jhogan@kernel.org>
Commit 17278a91e0 ("MIPS: CPS: Fix r1 .set mt assembler warning")
added .set MIPS_ISA_LEVEL_RAW to silence warnings about .set mt on r1,
however this can result in a MOVE being encoded as a 64-bit DADDU
instruction on certain version of binutils (e.g. 2.22), and reserved
instruction exceptions at runtime on 32-bit hardware.
Reduce the sizes of the push/pop sections to include only instructions
that are part of the MT ASE or which won't convert to 64-bit
instructions after .set mips64r2/mips64r6.
Reported-by: Greg Ungerer <gerg@linux-m68k.org>
Fixes: 17278a91e0 ("MIPS: CPS: Fix r1 .set mt assembler warning")
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.15
Tested-by: Greg Ungerer <gerg@linux-m68k.org>
Patchwork: https://patchwork.linux-mips.org/patch/18578/
Fix whitespace of generic platform Makefile so that obj-y values align.
Fixes: f2d0b0d5c1 ("MIPS: ranchu: Add Ranchu as a new generic-based board")
Signed-off-by: James Hogan <jhogan@kernel.org>
Reviewed-by: Paul Burton <paul.burton@mips.com>
Reviewed-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Miodrag Dinic <miodrag.dinic@mips.com>
Cc: Goran Ferenc <goran.ferenc@mips.com>
Cc: Aleksandar Markovic <aleksandar.markovic@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18582/
ranchu_of_match[] has no terminating element to end the search for a
matching compatible string when the first and only element does not
match, so add one now.
Fixes: f2d0b0d5c1 ("MIPS: ranchu: Add Ranchu as a new generic-based board")
Signed-off-by: James Hogan <jhogan@kernel.org>
Reviewed-by: Paul Burton <paul.burton@mips.com>
Reviewed-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Miodrag Dinic <miodrag.dinic@mips.com>
Cc: Goran Ferenc <goran.ferenc@mips.com>
Cc: Aleksandar Markovic <aleksandar.markovic@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18581/
We now have a platform (Ranchu) in the "generic" platform which matches
based on the FDT compatible string using mips_machine_is_compatible(),
however that function doesn't stop at a blank struct
of_device_id::compatible as that is an array in the struct, not a
pointer to a string.
Fix the loop completion to check the first byte of the compatible array
rather than the address of the compatible array in the struct.
Fixes: eed0eabd12 ("MIPS: generic: Introduce generic DT-based board support")
Signed-off-by: James Hogan <jhogan@kernel.org>
Reviewed-by: Paul Burton <paul.burton@mips.com>
Reviewed-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18580/
Blank help texts are probably either a typo, a Kconfig misunderstanding,
or some kind of half-committing to adding a help text (in which case a
TODO comment would be clearer, if the help text really can't be added
right away).
Best to remove them, IMO.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Blank help texts are probably either a typo, a Kconfig misunderstanding,
or some kind of half-committing to adding a help text (in which case a
TODO comment would be clearer, if the help text really can't be added
right away).
Best to remove them, IMO.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
to the clk rate protection support added by Jerome Brunet. This feature
will allow consumers to lock in a certain rate on the output of a clk so
that things like audio playback don't hear pops when the clk frequency
changes due to shared parent clks changing rates. Currently the clk
API doesn't guarantee the rate of a clk stays at the rate you request
after clk_set_rate() is called, so this new API will allow drivers
to express that requirement. Beyond this, the core got some debugfs
pretty printing patches and a couple minor non-critical fixes.
Looking outside of the core framework diff we have some new driver
additions and the removal of a legacy TI clk driver. Both of these hit
high in the dirstat. Also, the removal of the asm-generic/clkdev.h file
causes small one-liners in all the architecture Kbuild files. Overall, the
driver diff seems to be the normal stuff that comes all the time to
fix little problems here and there and to support new hardware.
Core:
- Clk rate protection
- Symbolic clk flags in debugfs output
- Clk registration enabled clks while doing bookkeeping updates
New Drivers:
- Spreadtrum SC9860
- HiSilicon hi3660 stub
- Qualcomm A53 PLL, SPMI clkdiv, and MSM8916 APCS
- Amlogic Meson-AXG
- ASPEED BMC
Removed Drivers:
- TI OMAP 3xxx legacy clk (non-DT) support
- asm*/clkdev.h got removed (not really a driver)
Updates:
- Renesas FDP1-0 module clock on R-Car M3-W
- Renesas LVDS module clock on R-Car V3M
- Misc fixes to pr_err() prints
- Qualcomm MSM8916 audio fixes
- Qualcomm IPQ8074 rounded out support for more peripherals
- Qualcomm Alpha PLL variants
- Divider code was using container_of() on bad pointers
- Allwinner DE2 clks on H3
- Amlogic minor data fixes and dropping of CLK_IGNORE_UNUSED
- Mediatek clk driver compile test support
- AT91 PMC clk suspend/resume restoration support
- PLL issues fixed on si5351
- Broadcom IProc PLL calculation updates
- DVFS support for Armada mvebu CPU clks
- Allwinner fixed post-divider support
- TI clkctrl fixes and support for newer SoCs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=bGPp
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"The core framework has a handful of patches this time around, mostly
due to the clk rate protection support added by Jerome Brunet.
This feature will allow consumers to lock in a certain rate on the
output of a clk so that things like audio playback don't hear pops
when the clk frequency changes due to shared parent clks changing
rates. Currently the clk API doesn't guarantee the rate of a clk stays
at the rate you request after clk_set_rate() is called, so this new
API will allow drivers to express that requirement.
Beyond this, the core got some debugfs pretty printing patches and a
couple minor non-critical fixes.
Looking outside of the core framework diff we have some new driver
additions and the removal of a legacy TI clk driver. Both of these hit
high in the dirstat. Also, the removal of the asm-generic/clkdev.h
file causes small one-liners in all the architecture Kbuild files.
Overall, the driver diff seems to be the normal stuff that comes all
the time to fix little problems here and there and to support new
hardware.
Summary:
Core:
- Clk rate protection
- Symbolic clk flags in debugfs output
- Clk registration enabled clks while doing bookkeeping updates
New Drivers:
- Spreadtrum SC9860
- HiSilicon hi3660 stub
- Qualcomm A53 PLL, SPMI clkdiv, and MSM8916 APCS
- Amlogic Meson-AXG
- ASPEED BMC
Removed Drivers:
- TI OMAP 3xxx legacy clk (non-DT) support
- asm*/clkdev.h got removed (not really a driver)
Updates:
- Renesas FDP1-0 module clock on R-Car M3-W
- Renesas LVDS module clock on R-Car V3M
- Misc fixes to pr_err() prints
- Qualcomm MSM8916 audio fixes
- Qualcomm IPQ8074 rounded out support for more peripherals
- Qualcomm Alpha PLL variants
- Divider code was using container_of() on bad pointers
- Allwinner DE2 clks on H3
- Amlogic minor data fixes and dropping of CLK_IGNORE_UNUSED
- Mediatek clk driver compile test support
- AT91 PMC clk suspend/resume restoration support
- PLL issues fixed on si5351
- Broadcom IProc PLL calculation updates
- DVFS support for Armada mvebu CPU clks
- Allwinner fixed post-divider support
- TI clkctrl fixes and support for newer SoCs"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (125 commits)
clk: aspeed: Handle inverse polarity of USB port 1 clock gate
clk: aspeed: Fix return value check in aspeed_cc_init()
clk: aspeed: Add reset controller
clk: aspeed: Register gated clocks
clk: aspeed: Add platform driver and register PLLs
clk: aspeed: Register core clocks
clk: Add clock driver for ASPEED BMC SoCs
clk: mediatek: adjust dependency of reset.c to avoid unexpectedly being built
clk: fix reentrancy of clk_enable() on UP systems
clk: meson-axg: fix potential NULL dereference in axg_clkc_probe()
clk: Simplify debugfs registration
clk: Fix debugfs_create_*() usage
clk: Show symbolic clock flags in debugfs
clk: renesas: r8a7796: Add FDP clock
clk: Move __clk_{get,put}() into private clk.h API
clk: sunxi: Use CLK_IS_CRITICAL flag for critical clks
clk: Improve flags doc for of_clk_detect_critical()
arch: Remove clkdev.h asm-generic from Kbuild
clk: sunxi-ng: a83t: Add M divider to TCON1 clock
clk: Prepare to remove asm-generic/clkdev.h
...
- Convert to use memblock_virt_alloc in DT code which supports bootmem
arches. With this we can remove the arch specific
early_init_dt_alloc_memory_arch() functions.
- Enable running the DT unittests on UML
- Use SPDX license tags on DT files
- Fix early FDT kconfig ifdef logic
- Clean-up unittest Makefile
- Fix function comment for of_irq_parse_raw
- Add missing documentation for linux,initrd-{start,end} properties
- Clean-up of binding examples using uppercase hex
- Add trivial devices W83773G and Infineon TLV493D-A1B6
- Add missing STM32 SoC bindings
- Various small binding doc fixes
-----BEGIN PGP SIGNATURE-----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=v6gj
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull DeviceTree updates from Rob Herring:
- Convert to use memblock_virt_alloc in DT code which supports
bootmem arches. With this we can remove the arch specific
early_init_dt_alloc_memory_arch() functions.
- Enable running the DT unittests on UML
- Use SPDX license tags on DT files
- Fix early FDT kconfig ifdef logic
- Clean-up unittest Makefile
- Fix function comment for of_irq_parse_raw
- Add missing documentation for linux,initrd-{start,end} properties
- Clean-up of binding examples using uppercase hex
- Add trivial devices W83773G and Infineon TLV493D-A1B6
- Add missing STM32 SoC bindings
- Various small binding doc fixes
* tag 'devicetree-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (23 commits)
xtensa: remove arch specific early DT functions
x86: remove arch specific early_init_dt_alloc_memory_arch
nios2: remove arch specific early_init_dt_alloc_memory_arch
mips: remove arch specific early_init_dt_alloc_memory_arch
metag: remove arch specific early DT functions
cris: remove arch specific early DT functions
libfdt: remove unnecessary include directive from <linux/libfdt.h>
of: unittest: refactor Makefile
of/fdt: use memblock_virt_alloc for early alloc
of: Use SPDX license tag for DT files
of/fdt: Fix #ifdef dependency of early flattree declarations
dt-bindings: h8300 clocksource: correct spelling of pulse
dt-bindings: imx6q-pcie: Add required property for i.MX6SX
mmc: Don't reference Linux-specific OF_GPIO_ACTIVE_LOW flag in DT binding
dt-bindings: Use lower case hex in unit-addresses
dt-bindings: display: panel: Fix compatible string for Toshiba LT089AC29000
dt-bindings: Add Infineon TLV493D-A1B6
dt-bindings: mailbox: ti,message-manager: Fix interrupt name error
dt-bindings: chosen: Document linux,initrd-{start,end}
dt-bindings: arm: document supported STM32 SoC family
...
Here is the set of "big" driver core patches for 4.16-rc1.
The majority of the work here is in the firmware subsystem, with reworks
to try to attempt to make the code easier to handle in the long run, but
no functional change. There's also some tree-wide sysfs attribute
fixups with lots of acks from the various subsystem maintainers, as well
as a handful of other normal fixes and changes.
And finally, some license cleanups for the driver core and sysfs code.
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWnLvPw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynNzACgkzjPoBytJWbpWFt6SR6L33/u4kEAnRFvVCGL
s6ygQPQhZIjKk2Lxa2hC
=Zihy
-----END PGP SIGNATURE-----
Merge tag 'driver-core-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of "big" driver core patches for 4.16-rc1.
The majority of the work here is in the firmware subsystem, with
reworks to try to attempt to make the code easier to handle in the
long run, but no functional change. There's also some tree-wide sysfs
attribute fixups with lots of acks from the various subsystem
maintainers, as well as a handful of other normal fixes and changes.
And finally, some license cleanups for the driver core and sysfs code.
All have been in linux-next for a while with no reported issues"
* tag 'driver-core-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (48 commits)
device property: Define type of PROPERTY_ENRTY_*() macros
device property: Reuse property_entry_free_data()
device property: Move property_entry_free_data() upper
firmware: Fix up docs referring to FIRMWARE_IN_KERNEL
firmware: Drop FIRMWARE_IN_KERNEL Kconfig option
USB: serial: keyspan: Drop firmware Kconfig options
sysfs: remove DEBUG defines
sysfs: use SPDX identifiers
drivers: base: add coredump driver ops
sysfs: add attribute specification for /sysfs/devices/.../coredump
test_firmware: fix missing unlock on error in config_num_requests_store()
test_firmware: make local symbol test_fw_config static
sysfs: turn WARN() into pr_warn()
firmware: Fix a typo in fallback-mechanisms.rst
treewide: Use DEVICE_ATTR_WO
treewide: Use DEVICE_ATTR_RO
treewide: Use DEVICE_ATTR_RW
sysfs.h: Use octal permissions
component: add debugfs support
bus: simple-pm-bus: convert bool SIMPLE_PM_BUS to tristate
...
Pull asm/uaccess.h whack-a-mole from Al Viro:
"It's linux/uaccess.h, damnit... Oh, well - eventually they'll stop
cropping up..."
* 'work.whack-a-mole' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
asm-prototypes.h: use linux/uaccess.h, not asm/uaccess.h
riscv: use linux/uaccess.h, not asm/uaccess.h...
ppc: for put_user() pull linux/uaccess.h, not asm/uaccess.h
Merge updates from Andrew Morton:
- misc fixes
- ocfs2 updates
- most of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits)
mm: remove PG_highmem description
tools, vm: new option to specify kpageflags file
mm/swap.c: make functions and their kernel-doc agree
mm, memory_hotplug: fix memmap initialization
mm: correct comments regarding do_fault_around()
mm: numa: do not trap faults on shared data section pages.
hugetlb, mbind: fall back to default policy if vma is NULL
hugetlb, mempolicy: fix the mbind hugetlb migration
mm, hugetlb: further simplify hugetlb allocation API
mm, hugetlb: get rid of surplus page accounting tricks
mm, hugetlb: do not rely on overcommit limit during migration
mm, hugetlb: integrate giga hugetlb more naturally to the allocation path
mm, hugetlb: unify core page allocation accounting and initialization
mm/memcontrol.c: try harder to decrease [memory,memsw].limit_in_bytes
mm/memcontrol.c: make local symbol static
mm/hmm: fix uninitialized use of 'entry' in hmm_vma_walk_pmd()
include/linux/mmzone.h: fix explanation of lower bits in the SPARSEMEM mem_map pointer
mm/compaction.c: fix comment for try_to_compact_pages()
mm/page_ext.c: make page_ext_init a noop when CONFIG_PAGE_EXTENSION but nothing uses it
zsmalloc: use U suffix for negative literals being shifted
...
Pull networking updates from David Miller:
1) Significantly shrink the core networking routing structures. Result
of http://vger.kernel.org/~davem/seoul2017_netdev_keynote.pdf
2) Add netdevsim driver for testing various offloads, from Jakub
Kicinski.
3) Support cross-chip FDB operations in DSA, from Vivien Didelot.
4) Add a 2nd listener hash table for TCP, similar to what was done for
UDP. From Martin KaFai Lau.
5) Add eBPF based queue selection to tun, from Jason Wang.
6) Lockless qdisc support, from John Fastabend.
7) SCTP stream interleave support, from Xin Long.
8) Smoother TCP receive autotuning, from Eric Dumazet.
9) Lots of erspan tunneling enhancements, from William Tu.
10) Add true function call support to BPF, from Alexei Starovoitov.
11) Add explicit support for GRO HW offloading, from Michael Chan.
12) Support extack generation in more netlink subsystems. From Alexander
Aring, Quentin Monnet, and Jakub Kicinski.
13) Add 1000BaseX, flow control, and EEE support to mvneta driver. From
Russell King.
14) Add flow table abstraction to netfilter, from Pablo Neira Ayuso.
15) Many improvements and simplifications to the NFP driver bpf JIT,
from Jakub Kicinski.
16) Support for ipv6 non-equal cost multipath routing, from Ido
Schimmel.
17) Add resource abstration to devlink, from Arkadi Sharshevsky.
18) Packet scheduler classifier shared filter block support, from Jiri
Pirko.
19) Avoid locking in act_csum, from Davide Caratti.
20) devinet_ioctl() simplifications from Al viro.
21) More TCP bpf improvements from Lawrence Brakmo.
22) Add support for onlink ipv6 route flag, similar to ipv4, from David
Ahern.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1925 commits)
tls: Add support for encryption using async offload accelerator
ip6mr: fix stale iterator
net/sched: kconfig: Remove blank help texts
openvswitch: meter: Use 64-bit arithmetic instead of 32-bit
tcp_nv: fix potential integer overflow in tcpnv_acked
r8169: fix RTL8168EP take too long to complete driver initialization.
qmi_wwan: Add support for Quectel EP06
rtnetlink: enable IFLA_IF_NETNSID for RTM_NEWLINK
ipmr: Fix ptrdiff_t print formatting
ibmvnic: Wait for device response when changing MAC
qlcnic: fix deadlock bug
tcp: release sk_frag.page in tcp_disconnect
ipv4: Get the address of interface correctly.
net_sched: gen_estimator: fix lockdep splat
net: macb: Handle HRESP error
net/mlx5e: IPoIB, Fix copy-paste bug in flow steering refactoring
ipv6: addrconf: break critical section in addrconf_verify_rtnl()
ipv6: change route cache aging logic
i40e/i40evf: Update DESC_NEEDED value to reflect larger value
bnxt_en: cleanup DIM work on device shutdown
...
This pull requests contains a consolidation of the generic no-IOMMU code,
a well as the glue code for swiotlb. All the code is based on the x86
implementation with hooks to allow all architectures that aren't cache
coherent to use it. The x86 conversion itself has been deferred because
the x86 maintainers were a little busy in the last months.
-----BEGIN PGP SIGNATURE-----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=Nrl9
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-4.16' of git://git.infradead.org/users/hch/dma-mapping
Pull dma mapping updates from Christoph Hellwig:
"Except for a runtime warning fix from Christian this is all about
consolidation of the generic no-IOMMU code, a well as the glue code
for swiotlb.
All the code is based on the x86 implementation with hooks to allow
all architectures that aren't cache coherent to use it.
The x86 conversion itself has been deferred because the x86
maintainers were a little busy in the last months"
* tag 'dma-mapping-4.16' of git://git.infradead.org/users/hch/dma-mapping: (57 commits)
MAINTAINERS: add the iommu list for swiotlb and xen-swiotlb
arm64: use swiotlb_alloc and swiotlb_free
arm64: replace ZONE_DMA with ZONE_DMA32
mips: use swiotlb_{alloc,free}
mips/netlogic: remove swiotlb support
tile: use generic swiotlb_ops
tile: replace ZONE_DMA with ZONE_DMA32
unicore32: use generic swiotlb_ops
ia64: remove an ifdef around the content of pci-dma.c
ia64: clean up swiotlb support
ia64: use generic swiotlb_ops
ia64: replace ZONE_DMA with ZONE_DMA32
swiotlb: remove various exports
swiotlb: refactor coherent buffer allocation
swiotlb: refactor coherent buffer freeing
swiotlb: wire up ->dma_supported in swiotlb_dma_ops
swiotlb: add common swiotlb_map_ops
swiotlb: rename swiotlb_free to swiotlb_exit
x86: rename swiotlb_dma_ops
powerpc: rename swiotlb_dma_ops
...
Pull poll annotations from Al Viro:
"This introduces a __bitwise type for POLL### bitmap, and propagates
the annotations through the tree. Most of that stuff is as simple as
'make ->poll() instances return __poll_t and do the same to local
variables used to hold the future return value'.
Some of the obvious brainos found in process are fixed (e.g. POLLIN
misspelled as POLL_IN). At that point the amount of sparse warnings is
low and most of them are for genuine bugs - e.g. ->poll() instance
deciding to return -EINVAL instead of a bitmap. I hadn't touched those
in this series - it's large enough as it is.
Another problem it has caught was eventpoll() ABI mess; select.c and
eventpoll.c assumed that corresponding POLL### and EPOLL### were
equal. That's true for some, but not all of them - EPOLL### are
arch-independent, but POLL### are not.
The last commit in this series separates userland POLL### values from
the (now arch-independent) kernel-side ones, converting between them
in the few places where they are copied to/from userland. AFAICS, this
is the least disruptive fix preserving poll(2) ABI and making epoll()
work on all architectures.
As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and
it will trigger only on what would've triggered EPOLLWRBAND on other
architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered
at all on sparc. With this patch they should work consistently on all
architectures"
* 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits)
make kernel-side POLL... arch-independent
eventpoll: no need to mask the result of epi_item_poll() again
eventpoll: constify struct epoll_event pointers
debugging printk in sg_poll() uses %x to print POLL... bitmap
annotate poll(2) guts
9p: untangle ->poll() mess
->si_band gets POLL... bitmap stored into a user-visible long field
ring_buffer_poll_wait() return value used as return value of ->poll()
the rest of drivers/*: annotate ->poll() instances
media: annotate ->poll() instances
fs: annotate ->poll() instances
ipc, kernel, mm: annotate ->poll() instances
net: annotate ->poll() instances
apparmor: annotate ->poll() instances
tomoyo: annotate ->poll() instances
sound: annotate ->poll() instances
acpi: annotate ->poll() instances
crypto: annotate ->poll() instances
block: annotate ->poll() instances
x86: annotate ->poll() instances
...
Pull siginfo cleanups from Eric Biederman:
"Long ago when 2.4 was just a testing release copy_siginfo_to_user was
made to copy individual fields to userspace, possibly for efficiency
and to ensure initialized values were not copied to userspace.
Unfortunately the design was complex, it's assumptions unstated, and
humans are fallible and so while it worked much of the time that
design failed to ensure unitialized memory is not copied to userspace.
This set of changes is part of a new design to clean up siginfo and
simplify things, and hopefully make the siginfo handling robust enough
that a simple inspection of the code can be made to ensure we don't
copy any unitializied fields to userspace.
The design is to unify struct siginfo and struct compat_siginfo into a
single definition that is shared between all architectures so that
anyone adding to the set of information shared with struct siginfo can
see the whole picture. Hopefully ensuring all future si_code
assignments are arch independent.
The design is to unify copy_siginfo_to_user32 and
copy_siginfo_from_user32 so that those function are complete and cope
with all of the different cases documented in signinfo_layout. I don't
think there was a single implementation of either of those functions
that was complete and correct before my changes unified them.
The design is to introduce a series of helpers including
force_siginfo_fault that take the values that are needed in struct
siginfo and build the siginfo structure for their callers. Ensuring
struct siginfo is built correctly.
The remaining work for 4.17 (unless someone thinks it is post -rc1
material) is to push usage of those helpers down into the
architectures so that architecture specific code will not need to deal
with the fiddly work of intializing struct siginfo, and then when
struct siginfo is guaranteed to be fully initialized change copy
siginfo_to_user into a simple wrapper around copy_to_user.
Further there is work in progress on the issues that have been
documented requires arch specific knowledge to sort out.
The changes below fix or at least document all of the issues that have
been found with siginfo generation. Then proceed to unify struct
siginfo the 32 bit helpers that copy siginfo to and from userspace,
and generally clean up anything that is not arch specific with regards
to siginfo generation.
It is a lot but with the unification you can of siginfo you can
already see the code reduction in the kernel"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (45 commits)
signal/memory-failure: Use force_sig_mceerr and send_sig_mceerr
mm/memory_failure: Remove unused trapno from memory_failure
signal/ptrace: Add force_sig_ptrace_errno_trap and use it where needed
signal/powerpc: Remove unnecessary signal_code parameter of do_send_trap
signal: Helpers for faults with specialized siginfo layouts
signal: Add send_sig_fault and force_sig_fault
signal: Replace memset(info,...) with clear_siginfo for clarity
signal: Don't use structure initializers for struct siginfo
signal/arm64: Better isolate the COMPAT_TASK portion of ptrace_hbptriggered
ptrace: Use copy_siginfo in setsiginfo and getsiginfo
signal: Unify and correct copy_siginfo_to_user32
signal: Remove the code to clear siginfo before calling copy_siginfo_from_user32
signal: Unify and correct copy_siginfo_from_user32
signal/blackfin: Remove pointless UID16_SIGINFO_COMPAT_NEEDED
signal/blackfin: Move the blackfin specific si_codes to asm-generic/siginfo.h
signal/tile: Move the tile specific si_codes to asm-generic/siginfo.h
signal/frv: Move the frv specific si_codes to asm-generic/siginfo.h
signal/ia64: Move the ia64 specific si_codes to asm-generic/siginfo.h
signal/powerpc: Remove redefinition of NSIGTRAP on powerpc
signal: Move addr_lsb into the _sigfault union for clarity
...
Now that the DT core code handles bootmem arches, we can remove the MIPS
specific early_init_dt_alloc_memory_arch function.
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Signed-off-by: Rob Herring <robh@kernel.org>
-----BEGIN PGP SIGNATURE-----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=jhWg
-----END PGP SIGNATURE-----
Merge tag 'init_task-20180117' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull init_task initializer cleanups from David Howells:
"It doesn't seem useful to have the init_task in a header file rather
than in a normal source file. We could consolidate init_task handling
instead and expand out various macros.
Here's a series of patches that consolidate init_task handling:
(1) Make THREAD_SIZE available to vmlinux.lds for cris, hexagon and
openrisc.
(2) Alter the INIT_TASK_DATA linker script macro to set
init_thread_union and init_stack rather than defining these in C.
Insert init_task and init_thread_into into the init_stack area in
the linker script as appropriate to the configuration, with
different section markers so that they end up correctly ordered.
We can then get merge ia64's init_task.c into the main one.
We then have a bunch of single-use INIT_*() macros that seem only
to be macros because they used to be used per-arch. We can then
expand these in place of the user and get rid of a few lines and
a lot of backslashes.
(3) Expand INIT_TASK() in place.
(4) Expand in place various small INIT_*() macros that are defined
conditionally. Expand them and surround them by #if[n]def/#endif
in the .c file as it takes fewer lines.
(5) Expand INIT_SIGNALS() and INIT_SIGHAND() in place.
(6) Expand INIT_STRUCT_PID in place.
These macros can then be discarded"
* tag 'init_task-20180117' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
Expand INIT_STRUCT_PID and remove
Expand the INIT_SIGNALS and INIT_SIGHAND macros and remove
Expand various INIT_* macros and remove
Expand INIT_TASK() in init/init_task.c and remove
Construct init thread stack in the linker script rather than by union
openrisc: Make THREAD_SIZE available to vmlinux.lds
hexagon: Make THREAD_SIZE available to vmlinux.lds
cris: Make THREAD_SIZE available to vmlinux.lds
Alexei Starovoitov says:
====================
pull-request: bpf-next 2018-01-26
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) A number of extensions to tcp-bpf, from Lawrence.
- direct R or R/W access to many tcp_sock fields via bpf_sock_ops
- passing up to 3 arguments to bpf_sock_ops functions
- tcp_sock field bpf_sock_ops_cb_flags for controlling callbacks
- optionally calling bpf_sock_ops program when RTO fires
- optionally calling bpf_sock_ops program when packet is retransmitted
- optionally calling bpf_sock_ops program when TCP state changes
- access to tclass and sk_txhash
- new selftest
2) div/mod exception handling, from Daniel.
One of the ugly leftovers from the early eBPF days is that div/mod
operations based on registers have a hard-coded src_reg == 0 test
in the interpreter as well as in JIT code generators that would
return from the BPF program with exit code 0. This was basically
adopted from cBPF interpreter for historical reasons.
There are multiple reasons why this is very suboptimal and prone
to bugs. To name one: the return code mapping for such abnormal
program exit of 0 does not always match with a suitable program
type's exit code mapping. For example, '0' in tc means action 'ok'
where the packet gets passed further up the stack, which is just
undesirable for such cases (e.g. when implementing policy) and
also does not match with other program types.
After considering _four_ different ways to address the problem,
we adapt the same behavior as on some major archs like ARMv8:
X div 0 results in 0, and X mod 0 results in X. aarch64 and
aarch32 ISA do not generate any traps or otherwise aborts
of program execution for unsigned divides.
Given the options, it seems the most suitable from
all of them, also since major archs have similar schemes in
place. Given this is all in the realm of undefined behavior,
we still have the option to adapt if deemed necessary.
3) sockmap sample refactoring, from John.
4) lpm map get_next_key fixes, from Yonghong.
5) test cleanups, from Alexei and Prashant.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The verifier in both cBPF and eBPF reject div/mod by 0 imm,
so this can never load. Remove emitting such test and reject
it from being JITed instead (the latter is actually also not
needed, but given practice in sparc64, ppc64 today, so
doesn't hurt to add it here either).
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Daney <david.daney@cavium.com>
Reviewed-by: David Daney <david.daney@cavium.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Since we've changed div/mod exception handling for src_reg in
eBPF verifier itself, remove the leftovers from mips64 JIT.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Daney <david.daney@cavium.com>
Reviewed-by: David Daney <david.daney@cavium.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
It doesn't actually do anything. Merge its help text into
EXTRA_FIRMWARE.
Fixes: 5620a0d1aa ("firmware: delete in-kernel firmware")
Fixes: 0946b2fb38 ("firmware: cleanup FIRMWARE_IN_KERNEL message")
Signed-off-by: Benjamin Gilbert <benjamin.gilbert@coreos.com>
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
MEM_RESERVED is used as a value of enum mem_type in include/linux/
edac.h. This will make failure to build for Loongson in some case:
for example with CONFIG_RAS enabled.
So here rename MEM_RESERVED to SYSTEM_RAM_RESERVED in Loongson code.
Signed-off-by: YunQiang Su <yunqiang.su@imgtec.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Reviewed-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17724/
Signed-off-by: James Hogan <jhogan@kernel.org>
Enable ZBOOT support. The WRT54GL router's bootloader limits kernel
size to 3 MB with the normal load address, which is a bit challenging
vmlinux size with modern Linux. A compressed kernel allows booting
much bigger kernels.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18492/
Signed-off-by: James Hogan <jhogan@kernel.org>
The trailing semicolon is an empty statement that does no operation.
Removing it since it doesn't do anything.
Fixes: d0f0f63ac1 ("MIPS: Rewrite csum_fold to plain C.")
Signed-off-by: Luis de Bethencourt <luisbg@kernel.org>
Cc: Joe Perches <joe@perches.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18517/
Signed-off-by: James Hogan <jhogan@kernel.org>
en_rx_am.c was deleted in 'net-next' but had a bug fixed in it in
'net'.
The esp{4,6}_offload.c conflicts were overlapping changes.
The 'out' label is removed so we just return ERR_PTR(-EINVAL)
directly.
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the bits to be masked when watchhi is read is defined inline
for each register. To avoid this, define the bits once and mask each
register with that value.
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Acked-by: David Daney <david.daney@cavium.com>
Reviewed-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18158/
Signed-off-by: James Hogan <jhogan@kernel.org>
Currently the bits to be set in the watchhi register in addition to that
requested by the user is defined inline for each register. To avoid
this, define the bits once and or that in for each register.
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Acked-by: David Daney <david.daney@cavium.com>
Reviewed-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18157/
Signed-off-by: James Hogan <jhogan@kernel.org>
The siginfo structure has all manners of holes with the result that a
structure initializer is not guaranteed to initialize all of the bits.
As we have to copy the structure to userspace don't even try to use
a structure initializer. Instead use clear_siginfo followed by initializing
selected fields. This gives a guarantee that uninitialized kernel memory
is not copied to userspace.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Update MSA control register access helpers to use the new helpers for
parsing register names and creating custom assembly macro instructions.
This allows the move via $at to be dropped (saving a total of about 20
bytes of kernel code).
Note, this does not alter the equivalent code in .S files, which still
uses the $at trick.
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17776/
Now that we are using assembler macros to implement XPA instructions on
toolchains which don't support them, pass Cop0 register names to the
__{readx,writex}_32bit_c0_register macros in $n format rather than
register numbers. Also pass a register select which may be useful in
future (for example for MemoryMapID field of WatchHi registers on
I6500).
This is to make them consistent with the normal Cop0 register access
macros which they were originally based on.
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17777/
Tweak __writex_32bit_c0_register() to allow the compiler to use $0 (the
zero register) as an input to the mthc0 instruction.
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17774/
Utilise XPA instructions MFHC0 & MTHC0 in inline assembly instead of
directly encoding them with the _ASM_INSN* macros, and transparently
implement these instructions as assembler macros if the toolchain
doesn't support them natively, using the recently introduced assembler
macro helpers.
The old direct encodings were restricted to using the register $at, so
this allows the extra register moves to go away (saving a grand total of
24 bytes).
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17775/
Now that we are using assembler macros to implement VZ instructions on
toolchains which don't support them, pass VZ guest Cop0 register names
to the __{read,write}_{32bit,ulong,64bit}_gc0_register macros in $n
format rather than register numbers. This is to make them consistent
with the normal root Cop0 register access macros which they were
originally based on.
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17773/
Update VZ guest register & guest TLB access helpers to use the new
assembly macros for parsing register names and creating custom assembly
macro instructions, which has a number of advantages:
- Better code can be generated on toolchains which don't support VZ,
more closely matching those which do, since there is no need to
bounce values via the $at register. Some differences still remain due
to the inability to safely fill branch delay slots and R6 compact
branch forbidden slots with explicitly encoded instructions,
resulting in some extra NOPs added by the assembler.
- Some code duplication between toolchains which do and don't support
VZ instructions is removed, since the helpers are only implemented
once. When the toolchain doesn't implement the instruction an
assembly macro implements it instead.
- Instruction encodings are kept together in the source.
On a generic kernel with KVM VZ support enabled this change saves about
2.5KiB of kernel code when TOOLCHAIN_SUPPORTS_VIRT=n, bringing it down
to about 0.5KiB more than when TOOLCHAIN_SUPPORTS_VIRT=y on r6, and just
68 bytes more on r2.
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17772/
Implement a parse_r assembler macro in asm/mipsregs.h to parse a
register in $n form, and a few C macros for defining assembler macro
instructions. These can be used to more transparently support older
binutils versions which don't support for example the msa, virt, xpa, or
crc instructions.
In particular they overcome the difficulty of turning a register name in
$n form into an instruction encoding suitable for giving to .word /
.hword, which is particularly problematic when needed from inline
assembly where the compiler is responsible for register allocation.
Traditionally this had required the use of $at and an extra MOV
instruction, but for CRC instructions with multiple GP register operands
that approach becomes more difficult.
Three assembler macro creation helpers are added:
- _ASM_MACRO_0(OP, ENC)
This is to define an assembler macro for an instruction which has no
operands, for example the VZ TLBGR instruction.
- _ASM_MACRO_2R(OP, R1, R2, ENC)
This is to define an assembler macro for an instruction which has 2
register operands, for example the CFCMSA instruction.
- _ASM_MACRO_3R(OP, R1, R2, R3, ENC)
This is to define an assembler macro for an instruction which has 3
register operands, for example the crc32 instructions.
- _ASM_MACRO_2R_1S(OP, R1, R2, SEL3, ENC)
This is to define an assembler macro for a Cop0 move instruction,
with 2 register operands and an optional register select operand
which defaults to 0, for example the VZ MFGC0 instruction.
Suggested-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Marcin Nowakowski <marcin.nowakowski@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17770/
Provide amendments to the MIPS generic platform framework so that
the new generic-based board Ranchu can be chosen to be built.
The Ranchu board is intended to be used by Android emulator. The name
"Ranchu" originates from Android development community. "Goldfish" and
"Ranchu" are terms used for two generations of virtual boards used by
Android emulator. The name "Ranchu" is a newer one among the two, and
this patch deals with Ranchu. However, for historical reasons, some
devices/drivers still contain the name "Goldfish".
MIPS Ranchu machine includes a number of Goldfish devices. The support
for Virtio devices is also included. Ranchu board supports up to 16
Virtio devices which can be attached using Virtio MMIO Bus. This is
summarized in the following picture:
ABUS
||----MIPS CPU
|| | IRQs
||----Goldfish PIC------------(32)--------
|| | | | | | | | | |
||----Goldfish TTY------ | | | | | | | |
|| | | | | | | | |
||----Goldfish RTC-------- | | | | | | |
|| | | | | | | |
||----Goldfish FB----------- | | | | | |
|| | | | | | |
||----Goldfish Events--------- | | | | |
|| | | | | |
||----Goldfish Audio------------ | | | |
|| | | | |
||----Goldfish Battery------------ | | |
|| | | |
||----Android PIPE------------------ | |
|| | |
||----Virtio MMIO Bus | |
|| | | | | |
|| | | (virtio-block)--------- |
|| (16) | |
|| | (virtio-net)------------------
Device Tree is created on the QEMU side based on the information about
devices IO map and IRQ numbers. Kernel will load this DTB using UHI
boot protocol DTB handover mode.
Signed-off-by: Miodrag Dinic <miodrag.dinic@mips.com>
Signed-off-by: Goran Ferenc <goran.ferenc@mips.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@mips.com>
Reviewed-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18138/
Signed-off-by: James Hogan <jhogan@kernel.org>
Having a pure_initcall() callback just to permanently enable BPF
JITs under CONFIG_BPF_JIT_ALWAYS_ON is unnecessary and could leave
a small race window in future where JIT is still disabled on boot.
Since we know about the setting at compilation time anyway, just
initialize it properly there. Also consolidate all the individual
bpf_jit_enable variables into a single one and move them under one
location. Moreover, don't allow for setting unspecified garbage
values on them.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The 32-bit support was broken at runtime, it doesn't boot anymore,
witch is hard to debug because even early printk isn't working, also
there are some build warnings. Some newer bootloader may not support
32-bit ELF. So we decide to drop 32-bit support.
Make loongson64 a pure 64-bit arch.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18174/
Signed-off-by: James Hogan <jhogan@kernel.org>
The GCW Zero (http://www.gcw-zero.com) is a retro-gaming focused
handheld game console, successfully kickstarted in ~2012, running Linux.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Mathieu Malaterre <malat@debian.org>
Acked-by: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Maarten ter Huurne <maarten@treewalker.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18490/
Signed-off-by: James Hogan <jhogan@kernel.org>
According to config2, the associativity would be 5-ways, but the
documentation states 4-ways, which also matches the documented
L2 cache size of 256 kB.
Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Reviewed-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18488/
Signed-off-by: James Hogan <jhogan@kernel.org>
Provide just enough bits (clocks, clocksource, uart) to allow a kernel
to boot on the JZ4770 SoC to a initramfs userspace.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Reviewed-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Maarten ter Huurne <maarten@treewalker.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18487/
Signed-off-by: James Hogan <jhogan@kernel.org>
Previously, the mips_machtype variable was always initialized
to MACH_INGENIC_JZ4740 even if running on different SoCs.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Maarten ter Huurne <maarten@treewalker.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18486/
Signed-off-by: James Hogan <jhogan@kernel.org>
Add a machtype ID for the JZ4780 SoC, which was missing, and one for the
newly supported JZ4770 SoC.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Reviewed-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Maarten ter Huurne <maarten@treewalker.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18485/
Signed-off-by: James Hogan <jhogan@kernel.org>
jz4740_init_cmdline appends all arguments from argv (in fw_arg1) to
arcs_cmdline, up to argc (in fw_arg0). The common code in
fw_init_cmdline will do the exact same thing when run on a system where
fw_arg0 isn't a pointer to kseg0 (it'll also set _fw_envp but we don't
use it). Remove the custom implementation & use the generic code.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Reviewed-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Maarten ter Huurne <maarten@treewalker.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18484/
Signed-off-by: James Hogan <jhogan@kernel.org>
Platforms using DT will typically call __dt_setup_arch from
plat_mem_setup. This in turn calls early_init_dt_scan. When
CONFIG_CMDLINE is set, this leads to its value being copied into
boot_command_line by early_init_dt_scan_chosen. If this happens before
the code setting up boot_command_line in arch_mem_init runs, that code
will go on to append CONFIG_CMDLINE (via builtin_cmdline) to
boot_command_line again, duplicating it. For some command line
parameters (eg. earlycon) this can be a problem. Set up
boot_command_line before early_init_dt_scan_chosen gets called such that
it will not write CONFIG_CMDLINE in this scenario & the arguments aren't
duplicated.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Acked-by: Mathieu Malaterre <malat@debian.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Maarten ter Huurne <maarten@treewalker.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18483/
Signed-off-by: James Hogan <jhogan@kernel.org>
MIPS_GENERIC selects some options conditional on BIG_ENDIAN which does
not exist.
Replace BIG_ENDIAN with CPU_BIG_ENDIAN which is the correct kconfig
name. Note that BMIPS_GENERIC does the same which confirms that this
patch is needed.
Fixes: eed0eabd12 ("MIPS: generic: Introduce generic DT-based board support")
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Reviewed-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.9+
Patchwork: https://patchwork.linux-mips.org/patch/18495/
[jhogan@kernel.org: Clean up commit message]
Signed-off-by: James Hogan <jhogan@kernel.org>
Make doesn't expand shell style "vmlinuz.{32,ecoff,bin,srec}" to the 4
separate files, so none of these files get cleaned up by make clean.
List the files separately instead.
Fixes: ec3352925b ("MIPS: Remove all generated vmlinuz* files on "make clean"")
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18491/
vmlinuz is not built by default for platforms using
COMPRESSION_FNAME (e.g. Malta) due to an erroneous
check on ZBOOT
Signed-off-by: Daniel Sabogal <dsabogalcc@gmail.com>
Reviewed-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18466/
Signed-off-by: James Hogan <jhogan@kernel.org>
Since commit d41e6858ba ("MIPS: Kconfig: Set default MIPS system type
as generic") switched the default platform to the "generic" platform,
allmodconfig has been failing with the following linker error (among
other errors):
arch/mips/kernel/vpe-mt.o In function `vpe_run':
(.text+0x59c): undefined reference to `physical_memsize'
The Lantiq platform already worked around the same issue in commit
9050d50e22 ("MIPS: lantiq: Set physical_memsize") by declaring
physical_memsize with the initial value of 0 (on the assumption that the
actual memory size will be hard-coded in the loaded VPE firmware), and
the Malta platform already provided physical_memsize.
Since all other platforms will fail to link with the VPE loader enabled,
only allow Lantiq and Malta platforms to enable it, by way of a
SYS_SUPPORTS_VPE_LOADER which is selected by those two platforms and
which MIPS_VPE_LOADER depends on. SYS_SUPPORTS_MULTITHREADING is now a
dependency of SYS_SUPPORTS_VPE_LOADER so that Kconfig emits a warning if
SYS_SUPPORTS_VPE_LOADER is selected without SYS_SUPPORTS_MULTITHREADING.
Fixes: d41e6858ba ("MIPS: Kconfig: Set default MIPS system type as generic")
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: John Crispin <john@phrozen.org>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-mips@linux-mips.org
Tested-by: Guenter Roeck <linux@roeck-us.net>
Patchwork: https://patchwork.linux-mips.org/patch/18453/
Among the existing architecture specific versions of
copy_siginfo_to_user32 there are several different implementation
problems. Some architectures fail to handle all of the cases in in
the siginfo union. Some architectures perform a blind copy of the
siginfo union when the si_code is negative. A blind copy suggests the
data is expected to be in 32bit siginfo format, which means that
receiving such a signal via signalfd won't work, or that the data is
in 64bit siginfo and the code is copying nonsense to userspace.
Create a single instance of copy_siginfo_to_user32 that all of the
architectures can share, and teach it to handle all of the cases in
the siginfo union correctly, with the assumption that siginfo is
stored internally to the kernel is 64bit siginfo format.
A special case is made for x86 x32 format. This is needed as presence
of both x32 and ia32 on x86_64 results in two different 32bit signal
formats. By allowing this small special case there winds up being
exactly one code base that needs to be maintained between all of the
architectures. Vastly increasing the testing base and the chances of
finding bugs.
As the x86 copy of copy_siginfo_to_user32 the call of the x86
signal_compat_build_tests were moved into sigaction_compat_abi, so
that they will keep running.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The function copy_siginfo_from_user32 is used for two things, in ptrace
since the dawn of siginfo for arbirarily modifying a signal that
user space sees, and in sigqueueinfo to send a signal with arbirary
siginfo data.
Create a single copy of copy_siginfo_from_user32 that all architectures
share, and teach it to handle all of the cases in the siginfo union.
In the generic version of copy_siginfo_from_user32 ensure that all
of the fields in siginfo are initialized so that the siginfo structure
can be safely copied to userspace if necessary.
When copying the embedded sigval union copy the si_int member. That
ensures the 32bit values passes through the kernel unchanged.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
--EWB Added #ifdef CONFIG_X86_X32_ABI to arch/x86/kernel/signal_compat.c
Changed #ifdef CONFIG_X86_X32 to #ifdef CONFIG_X86_X32_ABI in
linux/compat.h
CONFIG_X86_X32 is set when the user requests X32 support.
CONFIG_X86_X32_ABI is set when the user requests X32 support
and the tool-chain has X32 allowing X32 support to be built.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
These already include the GFP_DMA/GFP_DMA32 usage, and will use CMA
memory if enabled, thus avoiding the GFP_NORETRY hack.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian König <christian.koenig@amd.com>
nlm_swiotlb_dma_ops is unused code, so the whole swiotlb support is dead.
If it gets resurrected at some point it should use the generic
swiotlb_dma_ops instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian König <christian.koenig@amd.com>
Lift the code from x86 so that we behave consistently. In the future we
should probably warn if any of these is set.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
... having taught the latter that si_errno and si_code might be
swapped.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
BPF alignment tests got a conflict because the registers
are output as Rn_w instead of just Rn in net-next, and
in net a fixup for a testcase prohibits logical operations
on pointers before using them.
Also, we should attempt to patch BPF call args if JIT always on is
enabled. Instead, if we fail to JIT the subprogs we should pass
an error back up and fail immediately.
Signed-off-by: David S. Miller <davem@davemloft.net>
GCC7 is a bit too eager to generate suboptimal __multi3 calls (128bit
multiply with 128bit result) for MIPS64r6 builds, even in code which
doesn't explicitly use 128bit types, such as the following:
unsigned long func(unsigned long a, unsigned long b)
{
return a > (~0UL) / b;
}
Which GCC rearanges to:
return (unsigned __int128)a * (unsigned __int128)b > 0xffffffffffffffff;
Therefore implement __multi3, but only for MIPS64r6 with GCC7 as under
normal circumstances we wouldn't expect any calls to __multi3 to be
generated from kernel code.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: James Hogan <jhogan@kernel.org>
Tested-by: Waldemar Brodkorb <wbx@openadk.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Maciej W. Rozycki <macro@mips.com>
Cc: Matthew Fortune <matthew.fortune@mips.com>
Cc: Florian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17890/
Since commit 68923cdc2e ("MIPS: CM: Add cluster & block args to
mips_cm_lock_other()"), mips_smp_send_ipi_mask() has used
mips_cm_lock_other_cpu() with each CPU number, rather than
mips_cm_lock_other() with the first VPE in each core. Prior to r6,
multicore multithreaded systems such as dual-core dual-thread
interAptivs with CPU Idle enabled (e.g. MIPS Creator Ci40) results in
mips_cm_lock_other() repeatedly hitting WARN_ON(vp != 0).
There doesn't appear to be anything fundamentally wrong about passing a
non-zero VP/VPE number, even if it is a core's region that is locked
into the other region before r6, so remove that particular WARN_ON().
Fixes: 68923cdc2e ("MIPS: CM: Add cluster & block args to mips_cm_lock_other()")
Signed-off-by: James Hogan <jhogan@kernel.org>
Reviewed-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # 4.14+
Patchwork: https://patchwork.linux-mips.org/patch/17883/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The MIPS_CPS_NS16550_BASE and MIPS_CPS_NS16550_SHIFT options have no
defaults for non-Malta platforms which select SYS_SUPPORTS_MIPS_CPS
(i.e. the pistachio and generic platforms). This is problematic for
automated allyesconfig and allmodconfig builds based on these platforms,
since make silentoldconfig tries to ask the user for values, and
especially since v4.15 where the default platform was switched to
generic.
Default these options to 0 and arrange for MIPS_CPS_NS16550 to be no
when using that default base address, so that the option only has an
effect when the default is provided (i.e. Malta) or when a value is
provided by the user.
Fixes: 609cf6f229 ("MIPS: CPS: Early debug using an ns16550-compatible UART")
Signed-off-by: James Hogan <jhogan@kernel.org>
Reviewed-by: Paul Burton <paul.burton@mips.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17749/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Currently MIPS allnoconfig with CONFIG_BCM47XX=y fails to compile due to
neither BCM47XX_BCMA nor BCM47XX_SSB being selected. This leads the
enumeration in arch/mips/include/asm/mach-bcm47xx/bcm47xx.h to be empty,
and compilation fails:
In file included from arch/mips/bcm47xx/irq.c:32:0:
./arch/mips/include/asm/mach-bcm47xx/bcm47xx.h:34:1: error: expected
identifier before '}' token
};
^
make[2]: *** [scripts/Makefile.build:314: arch/mips/bcm47xx/irq.o] Error 1
Fix this by ensuring that BCM47XX_SSB is selected if BCM47XX_BCMA is
not. This allows us to select either system or both, but not neither.
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: James Hogan <james.hogan@mips.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17703/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
And unlike the other helpers we don't require a <asm/dma-direct.h> as
this helper is a special case for ia64 only, and this keeps it as
simple as possible.
Signed-off-by: Christoph Hellwig <hch@lst.de>
phys_to_dma, dma_to_phys and dma_capable are helpers published by
architecture code for use of swiotlb and xen-swiotlb only. Drivers are
not supposed to use these directly, but use the DMA API instead.
Move these to a new asm/dma-direct.h helper, included by a
linux/dma-direct.h wrapper that provides the default linear mapping
unless the architecture wants to override it.
In the MIPS case the existing dma-coherent.h is reused for now as
untangling it will take a bit of work.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Currently MIPS allnoconfig with CONFIG_MIKROTIK_RB532=y fails to link
due to missing support for mac_pton():
LD vmlinux
arch/mips/rb532/devices.o: In function `setup_kmac':
devices.c:(.init.text+0xc): undefined reference to `mac_pton'
Rather than adding dependencies to the platform to force inclusion of
GENERIC_NET_UTILS which is selected by CONFIG_NET, just exclude the
setup of the MAC address if CONFIG_NET is not selected in the kernel
config.
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: James Hogan <james.hogan@mips.com>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Vladimir Zapolskiy <vz@mleia.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17702/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Currently MIPS allnoconfig with CONFIG_MIKROTIK_RB532=y fails to link due to
missing support for early_serial_setup():
LD vmlinux
arch/mips/rb532/serial.o: In function `setup_serial_port':
serial.c:(.init.text+0x14): undefined reference to `early_serial_setup'
Rather than adding dependencies to the platform to force inclusion of
SERIAL_8250_CONSOLE together with it's dependencies like TTY, HAS_IOMEM,
etc, just exclude arch/mips/rb532/serial.c from the build when it's
dependency is not selected in the kernel config.
Reported-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: James Hogan <james.hogan@mips.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17701/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Currently MIPS allnoconfig with CONFIG_ATH25=y fails to link due to
missing support for early_serial_setup():
LD vmlinux
arch/mips/ath25/devices.o: In function ath25_serial_setup':
devices.c:(.init.text+0x68): undefined reference to 'early_serial_setup'
Rather than adding dependencies to the platform to force inclusion of
SERIAL_8250_CONSOLE together with it's dependencies like TTY, HAS_IOMEM,
etc, just make ath25_serial_setup() a no-op when the dependency is not
selected in the kernel config.
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: James Hogan <james.hogan@mips.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17700/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Since commit aef9a7bd9b ("serial/uart/8250: Add tunable RX interrupt
trigger I/F of FIFO buffers"), the port's default FCR value isn't used
in serial8250_do_set_termios anymore, but copied over once in
serial8250_config_port and then modified as needed.
Unfortunately, serial8250_config_port will never be called if the port
is shared between kernel and userspace, and the port's flag doesn't have
UPF_BOOT_AUTOCONF, which would trigger a serial8250_config_port as well.
This causes garbled output from userspace:
[ 5.220000] random: procd urandom read with 49 bits of entropy available
ers
[kee
Fix this by forcing it to be configured on boot, resulting in the
expected output:
[ 5.250000] random: procd urandom read with 50 bits of entropy available
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
Fixes: aef9a7bd9b ("serial/uart/8250: Add tunable RX interrupt trigger I/F of FIFO buffers")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Nicolas Schichan <nschichan@freebox.fr>
Cc: linux-mips@linux-mips.org
Cc: linux-serial@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17544/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Construct the init thread stack in the linker script rather than doing it
by means of a union so that ia64's init_task.c can be got rid of.
The following symbols are then made available from INIT_TASK_DATA() linker
script macro:
init_thread_union
init_stack
INIT_TASK_DATA() also expands the region to THREAD_SIZE to accommodate the
size of the init stack. init_thread_union is given its own section so that
it can be placed into the stack space in the right order. I'm assuming
that the ia64 ordering is correct and that the task_struct is first and the
thread_info second.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Tested-by: Will Deacon <will.deacon@arm.com> (arm64)
Tested-by: Palmer Dabbelt <palmer@sifive.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Make read_c0_prid() use the new constant accessor macros so that it can
potentially be optimised or removed by the compiler. This is
particularly important under virtualisation, where even with hardware
assisted virtualisation (VZ), access to the PRid register may need to be
emulated by the hypervisor.
In particular this helps eliminate the read of the PRid register in the
rather frequently called add_interrupt_randomness() (which calls into
arch/mips/include/asm/timex.h) when the prid is unused but the read
can't be removed due to the inline asm being marked __volatile__.
Reported-by: Yann LeDu <Yann.LeDu@imgtec.com>
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Maciej W. Rozycki <macro@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17923/
Some Cop0 registers are constant and have no side effects when read.
There is no need for the inline asm to read these to be marked
__volatile__, and doing so prevents them from being removed by the
compiler.
Add a few new accessor macros to handle these registers more efficiently
(especially for the sake of running in a guest where redundant access to
the register may trap to the hypervisor):
__read_const_32bit_c0_register()
__read_const_64bit_c0_register()
__read_const_ulong_c0_register()
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Maciej W. Rozycki <macro@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17922/
Now that every architecture is using the generic clkdev.h file
and we no longer include asm/clkdev.h anywhere in the tree, we
can remove it.
Cc: Russell King <linux@armlinux.org.uk>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: <linux-arch@vger.kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Fix an API loophole introduced with commit 9791554b45 ("MIPS,prctl:
add PR_[GS]ET_FP_MODE prctl options for MIPS"), where the caller of
prctl(2) is incorrectly allowed to make a change to CP0.Status.FR or
CP0.Config5.FRE register bits even if CONFIG_MIPS_O32_FP64_SUPPORT has
not been enabled, despite that an executable requesting the mode
requested via ELF file annotation would not be allowed to run in the
first place, or for n64 and n64 ABI tasks which do not have non-default
modes defined at all. Add suitable checks to `mips_set_process_fp_mode'
and bail out if an invalid mode change has been requested for the ABI in
effect, even if the FPU hardware or emulation would otherwise allow it.
Always succeed however without taking any further action if the mode
requested is the same as one already in effect, regardless of whether
any mode change, should it be requested, would actually be allowed for
the task concerned.
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Fixes: 9791554b45 ("MIPS,prctl: add PR_[GS]ET_FP_MODE prctl options for MIPS")
Reviewed-by: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <james.hogan@mips.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # 4.0+
Patchwork: https://patchwork.linux-mips.org/patch/17800/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
To reduce the reliance on device ids, pass the dma channel numbers to
the enet devices as platform data.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Set I/O port resource structs to have IORESOURCE_IO in their type field.
Previously we marked these as merely IORESOURCE_BUSY without indicating the
type. Setting the type doesn't fix any functional problem but makes %pR
on the resource work better.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Daniel Borkmann says:
====================
pull-request: bpf-next 2017-12-18
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Allow arbitrary function calls from one BPF function to another BPF function.
As of today when writing BPF programs, __always_inline had to be used in
the BPF C programs for all functions, unnecessarily causing LLVM to inflate
code size. Handle this more naturally with support for BPF to BPF calls
such that this __always_inline restriction can be overcome. As a result,
it allows for better optimized code and finally enables to introduce core
BPF libraries in the future that can be reused out of different projects.
x86 and arm64 JIT support was added as well, from Alexei.
2) Add infrastructure for tagging functions as error injectable and allow for
BPF to return arbitrary error values when BPF is attached via kprobes on
those. This way of injecting errors generically eases testing and debugging
without having to recompile or restart the kernel. Tags for opting-in for
this facility are added with BPF_ALLOW_ERROR_INJECTION(), from Josef.
3) For BPF offload via nfp JIT, add support for bpf_xdp_adjust_head() helper
call for XDP programs. First part of this work adds handling of BPF
capabilities included in the firmware, and the later patches add support
to the nfp verifier part and JIT as well as some small optimizations,
from Jakub.
4) The bpftool now also gets support for basic cgroup BPF operations such
as attaching, detaching and listing current BPF programs. As a requirement
for the attach part, bpftool can now also load object files through
'bpftool prog load'. This reuses libbpf which we have in the kernel tree
as well. bpftool-cgroup man page is added along with it, from Roman.
5) Back then commit e87c6bc385 ("bpf: permit multiple bpf attachments for
a single perf event") added support for attaching multiple BPF programs
to a single perf event. Given they are configured through perf's ioctl()
interface, the interface has been extended with a PERF_EVENT_IOC_QUERY_BPF
command in this work in order to return an array of one or multiple BPF
prog ids that are currently attached, from Yonghong.
6) Various minor fixes and cleanups to the bpftool's Makefile as well
as a new 'uninstall' and 'doc-uninstall' target for removing bpftool
itself or prior installed documentation related to it, from Quentin.
7) Add CONFIG_CGROUP_BPF=y to the BPF kernel selftest config file which is
required for the test_dev_cgroup test case to run, from Naresh.
8) Fix reporting of XDP prog_flags for nfp driver, from Jakub.
9) Fix libbpf's exit code from the Makefile when libelf was not found in
the system, also from Jakub.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
global bpf_jit_enable variable is tested multiple times in JITs,
blinding and verifier core. The malicious root can try to toggle
it while loading the programs. This race condition was accounted
for and there should be no issues, but it's safer to avoid
this race condition.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
After the vcpu_load/vcpu_put pushdown, the handling of asynchronous VCPU
ioctl is already much clearer in that it is obvious that they bypass
vcpu_load and vcpu_put.
However, it is still not perfect in that the different state of the VCPU
mutex is still hidden in the caller. Separate those ioctls into a new
function kvm_arch_vcpu_async_ioctl that returns -ENOIOCTLCMD for more
"traditional" synchronous ioctls.
Cc: James Hogan <jhogan@kernel.org>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the calls to vcpu_load() and vcpu_put() in to the architecture
specific implementations of kvm_arch_vcpu_ioctl() which dispatches
further architecture-specific ioctls on to other functions.
Some architectures support asynchronous vcpu ioctls which cannot call
vcpu_load() or take the vcpu->mutex, because that would prevent
concurrent execution with a running VCPU, which is the intended purpose
of these ioctls, for example because they inject interrupts.
We repeat the separate checks for these specifics in the architecture
code for MIPS, S390 and PPC, and avoid taking the vcpu->mutex and
calling vcpu_load for these ioctls.
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move vcpu_load() and vcpu_put() into the architecture specific
implementations of kvm_arch_vcpu_ioctl_set_regs().
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move vcpu_load() and vcpu_put() into the architecture specific
implementations of kvm_arch_vcpu_ioctl_get_regs().
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move vcpu_load() and vcpu_put() into the architecture specific
implementations of kvm_arch_vcpu_ioctl_run().
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> # s390 parts
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
[Rebased. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Complement commit c23b3d1a53 ("MIPS: ptrace: Change GP regset to use
correct core dump register layout") and also reject outsized
PTRACE_SETREGSET requests to the NT_PRFPREG regset, like with the
NT_PRSTATUS regset.
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Fixes: c23b3d1a53 ("MIPS: ptrace: Change GP regset to use correct core dump register layout")
Cc: James Hogan <james.hogan@mips.com>
Cc: Paul Burton <Paul.Burton@mips.com>
Cc: Alex Smith <alex@alex-smith.me.uk>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # v3.17+
Patchwork: https://patchwork.linux-mips.org/patch/17930/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Complement commit d614fd58a2 ("mips/ptrace: Preserve previous
registers for short regset write") and like with the PTRACE_GETREGSET
ptrace(2) request also apply a BUILD_BUG_ON check for the size of the
`elf_fpreg_t' type in the PTRACE_SETREGSET request handler.
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Fixes: d614fd58a2 ("mips/ptrace: Preserve previous registers for short regset write")
Cc: James Hogan <james.hogan@mips.com>
Cc: Paul Burton <Paul.Burton@mips.com>
Cc: Alex Smith <alex@alex-smith.me.uk>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # v4.11+
Patchwork: https://patchwork.linux-mips.org/patch/17929/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Fix a commit 72b22bbad1 ("MIPS: Don't assume 64-bit FP registers for
FP regset") public API regression, then activated by commit 1db1af84d6
("MIPS: Basic MSA context switching support"), that caused the FCSR
register not to be read or written for CONFIG_CPU_HAS_MSA kernel
configurations (regardless of actual presence or absence of the MSA
feature in a given processor) with ptrace(2) PTRACE_GETREGSET and
PTRACE_SETREGSET requests nor recorded in core dumps.
This is because with !CONFIG_CPU_HAS_MSA configurations the whole of
`elf_fpregset_t' array is bulk-copied as it is, which includes the FCSR
in one half of the last, 33rd slot, whereas with CONFIG_CPU_HAS_MSA
configurations array elements are copied individually, and then only the
leading 32 FGR slots while the remaining slot is ignored.
Correct the code then such that only FGR slots are copied in the
respective !MSA and MSA helpers an then the FCSR slot is handled
separately in common code. Use `ptrace_setfcr31' to update the FCSR
too, so that the read-only mask is respected.
Retrieving a correct value of FCSR is important in debugging not only
for the human to be able to get the right interpretation of the
situation, but for correct operation of GDB as well. This is because
the condition code bits in FSCR are used by GDB to determine the
location to place a breakpoint at when single-stepping through an FPU
branch instruction. If such a breakpoint is placed incorrectly (i.e.
with the condition reversed), then it will be missed, likely causing the
debuggee to run away from the control of GDB and consequently breaking
the process of investigation.
Fortunately GDB continues using the older PTRACE_GETFPREGS ptrace(2)
request which is unaffected, so the regression only really hits with
post-mortem debug sessions using a core dump file, in which case
execution, and consequently single-stepping through branches is not
possible. Of course core files created by buggy kernels out there will
have the value of FCSR recorded clobbered, but such core files cannot be
corrected and the person using them simply will have to be aware that
the value of FCSR retrieved is not reliable.
Which also means we can likely get away without defining a replacement
API which would ensure a correct value of FSCR to be retrieved, or none
at all.
This is based on previous work by Alex Smith, extensively rewritten.
Signed-off-by: Alex Smith <alex@alex-smith.me.uk>
Signed-off-by: James Hogan <james.hogan@mips.com>
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Fixes: 72b22bbad1 ("MIPS: Don't assume 64-bit FP registers for FP regset")
Cc: Paul Burton <Paul.Burton@mips.com>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # v3.15+
Patchwork: https://patchwork.linux-mips.org/patch/17928/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Update commit d614fd58a2 ("mips/ptrace: Preserve previous registers
for short regset write") bug and consistently consume all data supplied
to `fpr_set_msa' with the ptrace(2) PTRACE_SETREGSET request, such that
a zero data buffer counter is returned where insufficient data has been
given to fill a whole number of FP general registers.
In reality this is not going to happen, as the caller is supposed to
only supply data covering a whole number of registers and it is verified
in `ptrace_regset' and again asserted in `fpr_set', however structuring
code such that the presence of trailing partial FP general register data
causes `fpr_set_msa' to return with a non-zero data buffer counter makes
it appear that this trailing data will be used if there are subsequent
writes made to FP registers, which is going to be the case with the FCSR
once the missing write to that register has been fixed.
Fixes: d614fd58a2 ("mips/ptrace: Preserve previous registers for short regset write")
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Cc: James Hogan <james.hogan@mips.com>
Cc: Paul Burton <Paul.Burton@mips.com>
Cc: Alex Smith <alex@alex-smith.me.uk>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # v4.11+
Patchwork: https://patchwork.linux-mips.org/patch/17927/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Complement commit d614fd58a2 ("mips/ptrace: Preserve previous
registers for short regset write") and ensure that no partial register
write attempt is made with PTRACE_SETREGSET, as we do not preinitialize
any temporaries used to hold incoming register data and consequently
random data could be written.
It is the responsibility of the caller, such as `ptrace_regset', to
arrange for writes to span whole registers only, so here we only assert
that it has indeed happened.
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Fixes: 72b22bbad1 ("MIPS: Don't assume 64-bit FP registers for FP regset")
Cc: James Hogan <james.hogan@mips.com>
Cc: Paul Burton <Paul.Burton@mips.com>
Cc: Alex Smith <alex@alex-smith.me.uk>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # v3.15+
Patchwork: https://patchwork.linux-mips.org/patch/17926/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
In preparation to fix a commit 72b22bbad1 ("MIPS: Don't assume 64-bit
FP registers for FP regset") FCSR access regression factor out
NT_PRFPREG regset access helpers for the non-MSA and the MSA variants
respectively, to avoid having to deal with excessive indentation in the
actual fix.
No functional change, however use `target->thread.fpu.fpr[0]' rather
than `target->thread.fpu.fpr[i]' for FGR holding type size determination
as there's no `i' variable to refer to anymore, and for the factored out
`i' variable declaration use `unsigned int' rather than `unsigned' as
its type, following the common style.
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Fixes: 72b22bbad1 ("MIPS: Don't assume 64-bit FP registers for FP regset")
Cc: James Hogan <james.hogan@mips.com>
Cc: Paul Burton <Paul.Burton@mips.com>
Cc: Alex Smith <alex@alex-smith.me.uk>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # v3.15+
Patchwork: https://patchwork.linux-mips.org/patch/17925/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Mark intentional fall throughs in switch statements with a consistent
comment.
In most of the cases, a new comment line containing text "fall through"
is inserted. In some of the cases, existing comment contained a variation
of the text "fall through" (for example, "FALL THROUGH" or "drop through").
In such cases, the existing comment is modified to contain "fall through".
Lastly, in two cases, code segments were described in comments as "fall
througs", but were in reality "breaks out" of switch statement. In such
cases, existing comments are accordingly modified.
Apart from making code easier to follow and debug, this change enables
some static code analysers to interpret newly inserted comments as their
annotations (and, therefore, not issue warnings of type "fall through in
switch statement", which is desireable, since marked fallthroughs are
intentional).
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@mips.com>
Cc: Douglas Leung <douglas.leung@mips.com>
Cc: Goran Ferenc <goran.ferenc@mips.com>
Cc: James Hogan <james.hogan@mips.com>
Cc: Maciej W. Rozycki <macro@mips.com>
Cc: Manuel Lauss <manuel.lauss@gmail.com>
Cc: Miodrag Dinic <miodrag.dinic@mips.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Petar Jovanovic <petar.jovanovic@mips.com>
Cc: Raghu Gandham <raghu.gandham@mips.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17588/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Replace several instances of multiple assignment with individual
assignments.
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@mips.com>
Cc: Douglas Leung <douglas.leung@mips.com>
Cc: Goran Ferenc <goran.ferenc@mips.com>
Cc: James Hogan <james.hogan@mips.com>
Cc: Maciej W. Rozycki <macro@mips.com>
Cc: Manuel Lauss <manuel.lauss@gmail.com>
Cc: Miodrag Dinic <miodrag.dinic@mips.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Petar Jovanovic <petar.jovanovic@mips.com>
Cc: Raghu Gandham <raghu.gandham@mips.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17587/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Move invocation of fpu_emu() to be out of if statement condition.
This makes code easier to follow and debug, and fixes a checkpatch
warning.
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@mips.com>
Cc: Douglas Leung <douglas.leung@mips.com>
Cc: Goran Ferenc <goran.ferenc@mips.com>
Cc: James Hogan <james.hogan@mips.com>
Cc: Maciej W. Rozycki <macro@mips.com>
Cc: Miodrag Dinic <miodrag.dinic@mips.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Petar Jovanovic <petar.jovanovic@mips.com>
Cc: Raghu Gandham <raghu.gandham@mips.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17586/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Declare function srl128() as static, since it it used just locally
to the source file.
This also removes a sparse warning for corresponding file.
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@mips.com>
Cc: Douglas Leung <douglas.leung@mips.com>
Cc: Goran Ferenc <goran.ferenc@mips.com>
Cc: James Hogan <james.hogan@mips.com>
Cc: Miodrag Dinic <miodrag.dinic@mips.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Petar Jovanovic <petar.jovanovic@mips.com>
Cc: Raghu Gandham <raghu.gandham@mips.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17585/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
MIPS CPS has a build warning on kernels configured for MIPS32R1 or
MIPS64R1, due to the use of .set mt without a prior .set mips{32,64}r2:
arch/mips/kernel/cps-vec.S Assembler messages:
arch/mips/kernel/cps-vec.S:238: Warning: the `mt' extension requires MIPS32 revision 2 or greater
Add .set MIPS_ISA_LEVEL_RAW before .set mt to silence the warning.
Fixes: 245a7868d2 ("MIPS: smp-cps: rework core/VPE initialisation")
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <james.hogan@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17699/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Pull networking fixes from David Miller:
1) CAN fixes from Martin Kelly (cancel URBs properly in all the CAN usb
drivers).
2) Revert returning -EEXIST from __dev_alloc_name() as this propagates
to userspace and broke some apps. From Johannes Berg.
3) Fix conn memory leaks and crashes in TIPC, from Jon Malloc and Cong
Wang.
4) Gianfar MAC can't do EEE so don't advertise it by default, from
Claudiu Manoil.
5) Relax strict netlink attribute validation, but emit a warning. From
David Ahern.
6) Fix regression in checksum offload of thunderx driver, from Florian
Westphal.
7) Fix UAPI bpf issues on s390, from Hendrik Brueckner.
8) New card support in iwlwifi, from Ihab Zhaika.
9) BBR congestion control bug fixes from Neal Cardwell.
10) Fix port stats in nfp driver, from Pieter Jansen van Vuuren.
11) Fix leaks in qualcomm rmnet, from Subash Abhinov Kasiviswanathan.
12) Fix DMA API handling in sh_eth driver, from Thomas Petazzoni.
13) Fix spurious netpoll warnings in bnxt_en, from Calvin Owens.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (67 commits)
net: mvpp2: fix the RSS table entry offset
tcp: evaluate packet losses upon RTT change
tcp: fix off-by-one bug in RACK
tcp: always evaluate losses in RACK upon undo
tcp: correctly test congestion state in RACK
bnxt_en: Fix sources of spurious netpoll warnings
tcp_bbr: reset long-term bandwidth sampling on loss recovery undo
tcp_bbr: reset full pipe detection on loss recovery undo
tcp_bbr: record "full bw reached" decision in new full_bw_reached bit
sfc: pass valid pointers from efx_enqueue_unwind
gianfar: Disable EEE autoneg by default
tcp: invalidate rate samples during SACK reneging
can: peak/pcie_fd: fix potential bug in restarting tx queue
can: usb_8dev: cancel urb on -EPIPE and -EPROTO
can: kvaser_usb: cancel urb on -EPIPE and -EPROTO
can: esd_usb2: cancel urb on -EPIPE and -EPROTO
can: ems_usb: cancel urb on -EPIPE and -EPROTO
can: mcba_usb: cancel urb on -EPROTO
usbnet: fix alignment for frames with no ethernet header
tcp: use current time in tcp_rcv_space_adjust()
...
Here are some small serdev and serial fixes for 4.15-rc3. They resolve
some reported problems:
- a number of serdev fixes to resolve crashes
- MIPS build fixes for their serial port
- a new 8250 device id
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWia9GQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynSEgCfZ/zINl1ItdXcMUr1cnznwNgFGhAAoIoIpmre
+4qtH6PjV/+kq+2j2lmG
=bxjP
-----END PGP SIGNATURE-----
Merge tag 'tty-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small serdev and serial fixes for 4.15-rc3. They resolve
some reported problems:
- a number of serdev fixes to resolve crashes
- MIPS build fixes for their serial port
- a new 8250 device id
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
MIPS: Add custom serial.h with BASE_BAUD override for generic kernel
serdev: ttyport: fix tty locking in close
serdev: ttyport: fix NULL-deref on hangup
serdev: fix receive_buf return value when no callback
serdev: ttyport: add missing receive_buf sanity checks
serial: 8250_early: Only set divisor if valid clk & baud
serial: 8250_pci: Add Amazon PCI serial device ID
Commit 0515e5999a ("bpf: introduce BPF_PROG_TYPE_PERF_EVENT
program type") introduced the bpf_perf_event_data structure which
exports the pt_regs structure. This is OK for multiple architectures
but fail for s390 and arm64 which do not export pt_regs. Programs
using them, for example, the bpf selftest fail to compile on these
architectures.
For s390, exporting the pt_regs is not an option because s390 wants
to allow changes to it. For arm64, there is a user_pt_regs structure
that covers parts of the pt_regs structure for use by user space.
To solve the broken uapi for s390 and arm64, introduce an abstract
type for pt_regs and add an asm/bpf_perf_event.h file that concretes
the type. An asm-generic header file covers the architectures that
export pt_regs today.
The arch-specific enablement for s390 and arm64 follows in separate
commits.
Reported-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Fixes: 0515e5999a ("bpf: introduce BPF_PROG_TYPE_PERF_EVENT program type")
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-and-tested-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* PPC bugfix: HPT guests on a POWER9 radix host
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJaICi1AAoJEL/70l94x66DjvEIAIML/e9YX1YrJZi0rsB9cbm0
Le3o5b3wKxPrlZdnpOZQ2mVWubUQdiHMPGX6BkpgyiJWUchnbj5ql1gUf5S0i3jk
TOk6nae6DU94xBuboeqZJlmx2VfPY/fqzLWsX3HFHpnzRl4XvXL5o7cWguIxVcVO
yU6bPgbAXyXSBennLWZxC3aQ2Ojikr3uxZQpUZTAPOW5hFINpCKCpqJBMxsb67wq
rwI0cJhRl92mHpbe8qeNJhavqY5eviy9iPUaZrOW9P4yw1uqjTAjgsUc1ydiaZSV
rOHeKBOgVfY/KBaNJKyKySfuL1MJ+DLcQqm9RlGpKNpFIeB0vvSf0gtmmqIAXIk=
=kh2y
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
- x86 bugfixes: APIC, nested virtualization, IOAPIC
- PPC bugfix: HPT guests on a POWER9 radix host
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (26 commits)
KVM: Let KVM_SET_SIGNAL_MASK work as advertised
KVM: VMX: Fix vmx->nested freeing when no SMI handler
KVM: VMX: Fix rflags cache during vCPU reset
KVM: X86: Fix softlockup when get the current kvmclock
KVM: lapic: Fixup LDR on load in x2apic
KVM: lapic: Split out x2apic ldr calculation
KVM: PPC: Book3S HV: Fix migration and HPT resizing of HPT guests on radix hosts
KVM: vmx: use X86_CR4_UMIP and X86_FEATURE_UMIP
KVM: x86: Fix CPUID function for word 6 (80000001_ECX)
KVM: nVMX: Fix vmx_check_nested_events() return value in case an event was reinjected to L2
KVM: x86: ioapic: Preserve read-only values in the redirection table
KVM: x86: ioapic: Clear Remote IRR when entry is switched to edge-triggered
KVM: x86: ioapic: Remove redundant check for Remote IRR in ioapic_set_irq
KVM: x86: ioapic: Don't fire level irq when Remote IRR set
KVM: x86: ioapic: Fix level-triggered EOI and IOAPIC reconfigure race
KVM: x86: inject exceptions produced by x86_decode_insn
KVM: x86: Allow suppressing prints on RDMSR/WRMSR of unhandled MSRs
KVM: x86: fix em_fxstor() sleeping while in atomic
KVM: nVMX: Fix mmu context after VMLAUNCH/VMRESUME failure
KVM: nVMX: Validate the IA32_BNDCFGS on nested VM-entry
...
In response to compile breakage introduced by a series that added the
pud_write helper to x86, Stephen notes:
did you consider using the other paradigm:
In arch include files:
#define pud_write pud_write
static inline int pud_write(pud_t pud)
.....
Then in include/asm-generic/pgtable.h:
#ifndef pud_write
tatic inline int pud_write(pud_t pud)
{
....
}
#endif
If you had, then the powerpc code would have worked ... ;-) and many
of the other interfaces in include/asm-generic/pgtable.h are
protected that way ...
Given that some architecture already define pmd_write() as a macro, it's
a net reduction to drop the definition of __HAVE_ARCH_PMD_WRITE.
Link: http://lkml.kernel.org/r/151129126721.37405.13339850900081557813.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Suggested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Oliver OHalloran <oliveroh@au1.ibm.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a custom serial.h header for MIPS, allowing platforms to override
the asm-generic version if required.
The generic platform uses this header to set BASE_BAUD to 0. The
generic platform supports multiple boards, which may have different
UART clocks. Also one of the boards supported is the Boston FPGA board,
where the UART clock depends on the loaded FPGA bitfile. As such there
is no way that the generic kernel can set a compile time default
BASE_BAUD.
Commit 31cb9a8575 ("earlycon: initialise baud field of earlycon device
structure") changed the behavior of of_setup_earlycon such that any baud
rate set in the device tree is now set in the earlycon structure. The
UART driver will then calculate a divisor based on BASE_BAUD and set it.
With MIPS generic kernels this resulted in garbage output due to the
incorrect uart clock rate being used to calculate a divisor. This
commit, combined with "serial: 8250_early: Only set divisor if valid clk
& baud" prevents the earlycon code setting a bad divisor and restores
earlycon output.
Fixes: 31cb9a8575 ("earlycon: initialise baud field of earlycon device structure")
Cc: stable <stable@vger.kernel.org> # 4.14
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
KVM API says for the signal mask you set via KVM_SET_SIGNAL_MASK, that
"any unblocked signal received [...] will cause KVM_RUN to return with
-EINTR" and that "the signal will only be delivered if not blocked by
the original signal mask".
This, however, is only true, when the calling task has a signal handler
registered for a signal. If not, signal evaluation is short-circuited for
SIG_IGN and SIG_DFL, and the signal is either ignored without KVM_RUN
returning or the whole process is terminated.
Make KVM_SET_SIGNAL_MASK behave as advertised by utilizing logic similar
to that in do_sigtimedwait() to avoid short-circuiting of signals.
Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull timer updates from Thomas Gleixner:
- The final conversion of timer wheel timers to timer_setup().
A few manual conversions and a large coccinelle assisted sweep and
the removal of the old initialization mechanisms and the related
code.
- Remove the now unused VSYSCALL update code
- Fix permissions of /proc/timer_list. I still need to get rid of that
file completely
- Rename a misnomed clocksource function and remove a stale declaration
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
m68k/macboing: Fix missed timer callback assignment
treewide: Remove TIMER_FUNC_TYPE and TIMER_DATA_TYPE casts
timer: Remove redundant __setup_timer*() macros
timer: Pass function down to initialization routines
timer: Remove unused data arguments from macros
timer: Switch callback prototype to take struct timer_list * argument
timer: Pass timer_list pointer to callbacks unconditionally
Coccinelle: Remove setup_timer.cocci
timer: Remove setup_*timer() interface
timer: Remove init_timer() interface
treewide: setup_timer() -> timer_setup() (2 field)
treewide: setup_timer() -> timer_setup()
treewide: init_timer() -> setup_timer()
treewide: Switch DEFINE_TIMER callbacks to struct timer_list *
s390: cmm: Convert timers to use timer_setup()
lightnvm: Convert timers to use timer_setup()
drivers/net: cris: Convert timers to use timer_setup()
drm/vc4: Convert timers to use timer_setup()
block/laptop_mode: Convert timers to use timer_setup()
net/atm/mpc: Avoid open-coded assignment of timer callback function
...
This changes all DEFINE_TIMER() callbacks to use a struct timer_list
pointer instead of unsigned long. Since the data argument has already been
removed, none of these callbacks are using their argument currently, so
this renames the argument to "unused".
Done using the following semantic patch:
@match_define_timer@
declarer name DEFINE_TIMER;
identifier _timer, _callback;
@@
DEFINE_TIMER(_timer, _callback);
@change_callback depends on match_define_timer@
identifier match_define_timer._callback;
type _origtype;
identifier _origarg;
@@
void
-_callback(_origtype _origarg)
+_callback(struct timer_list *unused)
{ ... }
Signed-off-by: Kees Cook <keescook@chromium.org>
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJaDuoWAAoJEAAOaEEZVoIVXEQP/jQYoU9hgvEj8j3ZIgi56SDJ
pR45w2zcJz2/uU43DEKyShyLgsuoBbJQ3l/gGBH/tl+xGm9NzB0gatoEu9GmKNYz
/IN6/vUFnoIAUyD+iMZbpmsYKIkz0z2YJo261IfspAwIft/cvHJnYYGQrP9YXg9F
c7bdDuANTKocdQigc4BQyOe3OfIBGfTwJhuakO+1yuZmGOVNyxEcdYbMM8FiTfc8
+62kvQQ3t7WMqSbM8M0QdGcYQjG0EwcVAuV7COurLJIva7hUkVel32MVUjoFcf28
BnRu2ztFJCubm1HA85twlJDtpeXbcMqrUl/CcwRMpwDaePd5GVB1h5iKqbZ51BZ1
fWT2STmt+8hY2B5eiXoYEaG3B7ZRr+r0oroxqOxpiZ/m4AVeouF+gPGv+NV5zgvD
NGWC0MdklIJ4xaC99NEeP6kBhz0M74VKymFCTeHkVg9m4TqDepNvitKed0qagw19
uw8seei7TOTm4o117+l55NHmyfTHXFO4U0WLTJyeZcoEnUs0rOcHeqyy0RwCBMrK
W2fJtdBLFr+tBIIrID4TnPhhYtSvIPjz+FpiRDobqhgvMva/PIvLGTWK4unrgIjG
ZQ7YGnwWda8GjqKhgZacn/BSXyJzOAF9hJp0mz2ORaOxaMarEV55duiZufCvGuZw
uUQWRCKuQX7Oi05i9jXp
=fCeF
-----END PGP SIGNATURE-----
Merge tag 'locks-v4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux
Pull file locking update from Jeff Layton:
"A couple of fixes for a patch that went into v4.14, and the bug report
just came in a few days ago.. It passes my (minimal) testing, and has
been in linux-next for a few days now.
I also would like to get my address changed in MAINTAINERS to clear
that hurdle"
* tag 'locks-v4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
fcntl: don't cap l_start and l_end values for F_GETLK64 in compat syscall
fcntl: don't leak fd reference when fixup_compat_flock fails
MAINTAINERS: s/jlayton@poochiereds.net/jlayton@kernel.org/
Pull compat and uaccess updates from Al Viro:
- {get,put}_compat_sigset() series
- assorted compat ioctl stuff
- more set_fs() elimination
- a few more timespec64 conversions
- several removals of pointless access_ok() in places where it was
followed only by non-__ variants of primitives
* 'misc.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (24 commits)
coredump: call do_unlinkat directly instead of sys_unlink
fs: expose do_unlinkat for built-in callers
ext4: take handling of EXT4_IOC_GROUP_ADD into a helper, get rid of set_fs()
ipmi: get rid of pointless access_ok()
pi433: sanitize ioctl
cxlflash: get rid of pointless access_ok()
mtdchar: get rid of pointless access_ok()
r128: switch compat ioctls to drm_ioctl_kernel()
selection: get rid of field-by-field copyin
VT_RESIZEX: get rid of field-by-field copyin
i2c compat ioctls: move to ->compat_ioctl()
sched_rr_get_interval(): move compat to native, get rid of set_fs()
mips: switch to {get,put}_compat_sigset()
sparc: switch to {get,put}_compat_sigset()
s390: switch to {get,put}_compat_sigset()
ppc: switch to {get,put}_compat_sigset()
parisc: switch to {get,put}_compat_sigset()
get_compat_sigset()
get rid of {get,put}_compat_itimerspec()
io_getevents: Use timespec64 to represent timeouts
...
* Introduce MAP_SYNC and MAP_SHARED_VALIDATE, a mechanism to enable
'userspace flush' of persistent memory updates via filesystem-dax
mappings. It arranges for any filesystem metadata updates that may be
required to satisfy a write fault to also be flushed ("on disk") before
the kernel returns to userspace from the fault handler. Effectively
every write-fault that dirties metadata completes an fsync() before
returning from the fault handler. The new MAP_SHARED_VALIDATE mapping
type guarantees that the MAP_SYNC flag is validated as supported by the
filesystem's ->mmap() file operation.
* Add support for the standard ACPI 6.2 label access methods that
replace the NVDIMM_FAMILY_INTEL (vendor specific) label methods. This
enables interoperability with environments that only implement the
standardized methods.
* Add support for the ACPI 6.2 NVDIMM media error injection methods.
* Add support for the NVDIMM_FAMILY_INTEL v1.6 DIMM commands for latch
last shutdown status, firmware update, SMART error injection, and
SMART alarm threshold control.
* Cleanup physical address information disclosures to be root-only.
* Fix revalidation of the DIMM "locked label area" status to support
dynamic unlock of the label area.
* Expand unit test infrastructure to mock the ACPI 6.2 Translate SPA
(system-physical-address) command and error injection commands.
Acknowledgements that came after the commits were pushed to -next:
957ac8c421 dax: fix PMD faults on zero-length files
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
a39e596baa xfs: support for synchronous DAX faults
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
7b565c9f96 xfs: Implement xfs_filemap_pfn_mkwrite() using __xfs_filemap_fault()
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
-----BEGIN PGP SIGNATURE-----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=h2vZ
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm and dax updates from Dan Williams:
"Save for a few late fixes, all of these commits have shipped in -next
releases since before the merge window opened, and 0day has given a
build success notification.
The ext4 touches came from Jan, and the xfs touches have Darrick's
reviewed-by. An xfstest for the MAP_SYNC feature has been through
a few round of reviews and is on track to be merged.
- Introduce MAP_SYNC and MAP_SHARED_VALIDATE, a mechanism to enable
'userspace flush' of persistent memory updates via filesystem-dax
mappings. It arranges for any filesystem metadata updates that may
be required to satisfy a write fault to also be flushed ("on disk")
before the kernel returns to userspace from the fault handler.
Effectively every write-fault that dirties metadata completes an
fsync() before returning from the fault handler. The new
MAP_SHARED_VALIDATE mapping type guarantees that the MAP_SYNC flag
is validated as supported by the filesystem's ->mmap() file
operation.
- Add support for the standard ACPI 6.2 label access methods that
replace the NVDIMM_FAMILY_INTEL (vendor specific) label methods.
This enables interoperability with environments that only implement
the standardized methods.
- Add support for the ACPI 6.2 NVDIMM media error injection methods.
- Add support for the NVDIMM_FAMILY_INTEL v1.6 DIMM commands for
latch last shutdown status, firmware update, SMART error injection,
and SMART alarm threshold control.
- Cleanup physical address information disclosures to be root-only.
- Fix revalidation of the DIMM "locked label area" status to support
dynamic unlock of the label area.
- Expand unit test infrastructure to mock the ACPI 6.2 Translate SPA
(system-physical-address) command and error injection commands.
Acknowledgements that came after the commits were pushed to -next:
- 957ac8c421 ("dax: fix PMD faults on zero-length files"):
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
- a39e596baa ("xfs: support for synchronous DAX faults") and
7b565c9f96 ("xfs: Implement xfs_filemap_pfn_mkwrite() using __xfs_filemap_fault()")
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>"
* tag 'libnvdimm-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (49 commits)
acpi, nfit: add 'Enable Latch System Shutdown Status' command support
dax: fix general protection fault in dax_alloc_inode
dax: fix PMD faults on zero-length files
dax: stop requiring a live device for dax_flush()
brd: remove dax support
dax: quiet bdev_dax_supported()
fs, dax: unify IOMAP_F_DIRTY read vs write handling policy in the dax core
tools/testing/nvdimm: unit test clear-error commands
acpi, nfit: validate commands against the device type
tools/testing/nvdimm: stricter bounds checking for error injection commands
xfs: support for synchronous DAX faults
xfs: Implement xfs_filemap_pfn_mkwrite() using __xfs_filemap_fault()
ext4: Support for synchronous DAX faults
ext4: Simplify error handling in ext4_dax_huge_fault()
dax: Implement dax_finish_sync_fault()
dax, iomap: Add support for synchronous faults
mm: Define MAP_SYNC and VM_SYNC flags
dax: Allow tuning whether dax_insert_mapping_entry() dirties entry
dax: Allow dax_iomap_fault() to return pfn
dax: Fix comment describing dax_iomap_fault()
...
-----BEGIN PGP SIGNATURE-----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=3vy0
-----END PGP SIGNATURE-----
Merge tag 'afs-next-20171113' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull AFS updates from David Howells:
"kAFS filesystem driver overhaul.
The major points of the overhaul are:
(1) Preliminary groundwork is laid for supporting network-namespacing
of kAFS. The remainder of the namespacing work requires some way
to pass namespace information to submounts triggered by an
automount. This requires something like the mount overhaul that's
in progress.
(2) sockaddr_rxrpc is used in preference to in_addr for holding
addresses internally and add support for talking to the YFS VL
server. With this, kAFS can do everything over IPv6 as well as
IPv4 if it's talking to servers that support it.
(3) Callback handling is overhauled to be generally passive rather
than active. 'Callbacks' are promises by the server to tell us
about data and metadata changes. Callbacks are now checked when
we next touch an inode rather than actively going and looking for
it where possible.
(4) File access permit caching is overhauled to store the caching
information per-inode rather than per-directory, shared over
subordinate files. Whilst older AFS servers only allow ACLs on
directories (shared to the files in that directory), newer AFS
servers break that restriction.
To improve memory usage and to make it easier to do mass-key
removal, permit combinations are cached and shared.
(5) Cell database management is overhauled to allow lighter locks to
be used and to make cell records autonomous state machines that
look after getting their own DNS records and cleaning themselves
up, in particular preventing races in acquiring and relinquishing
the fscache token for the cell.
(6) Volume caching is overhauled. The afs_vlocation record is got rid
of to simplify things and the superblock is now keyed on the cell
and the numeric volume ID only. The volume record is tied to a
superblock and normal superblock management is used to mediate
the lifetime of the volume fscache token.
(7) File server record caching is overhauled to make server records
independent of cells and volumes. A server can be in multiple
cells (in such a case, the administrator must make sure that the
VL services for all cells correctly reflect the volumes shared
between those cells).
Server records are now indexed using the UUID of the server
rather than the address since a server can have multiple
addresses.
(8) File server rotation is overhauled to handle VMOVED, VBUSY (and
similar), VOFFLINE and VNOVOL indications and to handle rotation
both of servers and addresses of those servers. The rotation will
also wait and retry if the server says it is busy.
(9) Data writeback is overhauled. Each inode no longer stores a list
of modified sections tagged with the key that authorised it in
favour of noting the modified region of a page in page->private
and storing a list of keys that made modifications in the inode.
This simplifies things and allows other keys to be used to
actually write to the server if a key that made a modification
becomes useless.
(10) Writable mmap() is implemented. This allows a kernel to be build
entirely on AFS.
Note that Pre AFS-3.4 servers are no longer supported, though this can
be added back if necessary (AFS-3.4 was released in 1998)"
* tag 'afs-next-20171113' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (35 commits)
afs: Protect call->state changes against signals
afs: Trace page dirty/clean
afs: Implement shared-writeable mmap
afs: Get rid of the afs_writeback record
afs: Introduce a file-private data record
afs: Use a dynamic port if 7001 is in use
afs: Fix directory read/modify race
afs: Trace the sending of pages
afs: Trace the initiation and completion of client calls
afs: Fix documentation on # vs % prefix in mount source specification
afs: Fix total-length calculation for multiple-page send
afs: Only progress call state at end of Tx phase from rxrpc callback
afs: Make use of the YFS service upgrade to fully support IPv6
afs: Overhaul volume and server record caching and fileserver rotation
afs: Move server rotation code into its own file
afs: Add an address list concept
afs: Overhaul cell database management
afs: Overhaul permit caching
afs: Overhaul the callback handling
afs: Rename struct afs_call server member to cm_server
...
Merge updates from Andrew Morton:
- a few misc bits
- ocfs2 updates
- almost all of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (131 commits)
memory hotplug: fix comments when adding section
mm: make alloc_node_mem_map a void call if we don't have CONFIG_FLAT_NODE_MEM_MAP
mm: simplify nodemask printing
mm,oom_reaper: remove pointless kthread_run() error check
mm/page_ext.c: check if page_ext is not prepared
writeback: remove unused function parameter
mm: do not rely on preempt_count in print_vma_addr
mm, sparse: do not swamp log with huge vmemmap allocation failures
mm/hmm: remove redundant variable align_end
mm/list_lru.c: mark expected switch fall-through
mm/shmem.c: mark expected switch fall-through
mm/page_alloc.c: broken deferred calculation
mm: don't warn about allocations which stall for too long
fs: fuse: account fuse_inode slab memory as reclaimable
mm, page_alloc: fix potential false positive in __zone_watermark_ok
mm: mlock: remove lru_add_drain_all()
mm, sysctl: make NUMA stats configurable
shmem: convert shmem_init_inodecache() to void
Unify migrate_pages and move_pages access checks
mm, pagevec: rename pagevec drained field
...
empty_bad_page() and empty_bad_pte_table() seem to be relics from old
days which is not used by any code for a long time. I have tried to
find when exactly but this is not really all that straightforward due to
many code movements - traces disappear around 2.4 times.
Anyway no code really references neither empty_bad_page nor
empty_bad_pte_table. We only allocate the storage which is not used by
anybody so remove them.
Link: http://lkml.kernel.org/r/20171004150045.30755-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Ralf Baechle <ralf@linus-mips.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: David Howells <dhowells@redhat.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
These are the main MIPS changes for 4.15.
Fixes:
- ralink: Fix MT7620 PCI build issues (4.5)
- Disable cmpxchg64() and HAVE_VIRT_CPU_ACCOUNTING_GEN for 32-bit SMP
(4.1)
- Fix MIPS64 FP save/restore on 32-bit kernels (4.0)
- ptrace: Pick up ptrace/seccomp changed syscall numbers (3.19)
- ralink: Fix MT7628 pinmux (3.19)
- BCM47XX: Fix LED inversion on WRT54GSv1 (3.17)
- Fix n32 core dumping as o32 since regset support (3.13)
- ralink: Drop obsolete USB_ARCH_HAS_HCD select
Build system:
- Default to "generic" (multiplatform) system type instead of IP22
- Use generic little endian MIPS32 r2 configuration as default defconfig
instead of ip22_defconfig
FPU emulation:
- Fix exception generation for certain R6 FPU instructions
SMP:
- Allow __cpu_number_map to be larger than NR_CPUS for sparse CPU id
spaces
Miscellaneous:
- Add iomem resource for kernel bss section for kexec/kdump
- Atomics: Nudge writes on bit unlock
- DT files: Standardise "ok" -> "okay"
Platform support:
BMIPS:
- Enable HARDIRQS_SW_RESEND
Broadcom BCM63XX:
- Add clkdev lookup support
- Update clk driver, UART driver, DTs to handle named refclk from DTs
- Split apart various clocks to more closely match hardware
- Add ethernet clocks
Cavium Octeon:
- Remove usage of cvmx_wait() in favour of __delay()
ImgTec Pistachio:
- DT: Drop deprecated dwmmc num-slots property
Ingenic JZ4780:
- Add NFS root to Ci20 defconfig
- Add watchdog to Ci20 DT & defconfig, and allow building of watchdog
driver with this SoC
Generic (multiplatform):
- Migrate xilfpga (MIPSfpga) platform to the generic platform
Lantiq xway:
- Fix ASC0/ASC1 clocks
Minor cleanups:
- Define virt_to_pfn()
- Make thread_saved_pc static
- Simplify 32-bit sign extension in __read_64bit_c0_split()
- DMA: Use vma_pages() helper
- FPU emulation: Replace unsigned with unsigned int
- MM: Removed unused lastpfn
- Alchemy: Make clk_ops const
- Lasat: Use setup_timer() helper
- ralink: Use BIT() in MT7620 PCI driver
-----BEGIN PGP SIGNATURE-----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=xbL0
-----END PGP SIGNATURE-----
Merge tag 'mips_4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips
Pull MIPS updates from James Hogan:
"These are the main MIPS changes for 4.15.
Fixes:
- ralink: Fix MT7620 PCI build issues (4.5)
- Disable cmpxchg64() and HAVE_VIRT_CPU_ACCOUNTING_GEN for 32-bit SMP
(4.1)
- Fix MIPS64 FP save/restore on 32-bit kernels (4.0)
- ptrace: Pick up ptrace/seccomp changed syscall numbers (3.19)
- ralink: Fix MT7628 pinmux (3.19)
- BCM47XX: Fix LED inversion on WRT54GSv1 (3.17)
- Fix n32 core dumping as o32 since regset support (3.13)
- ralink: Drop obsolete USB_ARCH_HAS_HCD select
Build system:
- Default to "generic" (multiplatform) system type instead of IP22
- Use generic little endian MIPS32 r2 configuration as default
defconfig instead of ip22_defconfig
FPU emulation:
- Fix exception generation for certain R6 FPU instructions
SMP:
- Allow __cpu_number_map to be larger than NR_CPUS for sparse CPU id
spaces
Miscellaneous:
- Add iomem resource for kernel bss section for kexec/kdump
- Atomics: Nudge writes on bit unlock
- DT files: Standardise "ok" -> "okay"
Minor cleanups:
- Define virt_to_pfn()
- Make thread_saved_pc static
- Simplify 32-bit sign extension in __read_64bit_c0_split()
- DMA: Use vma_pages() helper
- FPU emulation: Replace unsigned with unsigned int
- MM: Removed unused lastpfn
- Alchemy: Make clk_ops const
- Lasat: Use setup_timer() helper
- ralink: Use BIT() in MT7620 PCI driver
Platform support:
BMIPS:
- Enable HARDIRQS_SW_RESEND
Broadcom BCM63XX:
- Add clkdev lookup support
- Update clk driver, UART driver, DTs to handle named refclk from DTs
- Split apart various clocks to more closely match hardware
- Add ethernet clocks
Cavium Octeon:
- Remove usage of cvmx_wait() in favour of __delay()
ImgTec Pistachio:
- DT: Drop deprecated dwmmc num-slots property
Ingenic JZ4780:
- Add NFS root to Ci20 defconfig
- Add watchdog to Ci20 DT & defconfig, and allow building of watchdog
driver with this SoC
Generic (multiplatform):
- Migrate xilfpga (MIPSfpga) platform to the generic platform
Lantiq xway:
- Fix ASC0/ASC1 clocks"
* tag 'mips_4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: (46 commits)
MIPS: Add iomem resource for kernel bss section.
MIPS: cmpxchg64() and HAVE_VIRT_CPU_ACCOUNTING_GEN don't work for 32-bit SMP
MIPS: BMIPS: Enable HARDIRQS_SW_RESEND
MIPS: pci: Make use of the BIT() macro inside the mt7620 driver
MIPS: pci: Remove KERN_WARN instance inside the mt7620 driver
MIPS: pci: Remove duplicate define in mt7620 driver
MIPS: ralink: Fix typo in mt7628 pinmux function
MIPS: ralink: Fix MT7628 pinmux
MIPS: Fix odd fp register warnings with MIPS64r2
watchdog: jz4780: Allow selection of jz4740-wdt driver
MIPS/ptrace: Update syscall nr on register changes
MIPS/ptrace: Pick up ptrace/seccomp changed syscalls
MIPS: Fix an n32 core file generation regset support regression
MIPS: Fix MIPS64 FP save/restore on 32-bit kernels
MIPS: page.h: Define virt_to_pfn()
MIPS: Xilfpga: Switch to using generic defconfigs
MIPS: generic: Add support for MIPSfpga
MIPS: Set defconfig target to a generic system for 32r2el
MIPS: Kconfig: Set default MIPS system type as generic
MIPS: DTS: Remove num-slots from Pistachio SoC
...
Currently, we're capping the values too low in the F_GETLK64 case. The
fields in that structure are 64-bit values, so we shouldn't need to do
any sort of fixup there.
Make sure we check that assumption at build time in the future however
by ensuring that the sizes we're copying will fit.
With this, we no longer need COMPAT_LOFF_T_MAX either, so remove it.
Fixes: 94073ad77f (fs/locks: don't mess with the address limit in compat_fcntl64)
Reported-by: Vitaly Lipatov <lav@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: David Howells <dhowells@redhat.com>
- kbuild cleanups and improvements for dtbs
- Code clean-up of overlay code and fixing for some long standing memory
leak and race condition in applying overlays
- Improvements to DT memory usage making sysfs/kobjects optional and
skipping unflattening of disabled nodes. This is part of kernel
tinification efforts.
- Final piece of removing storing the full path for every DT node. The
prerequisite conversion of printk's to use device_node format
specifier happened in 4.14.
- Sync with current upstream dtc. This brings additional checks to dtb
compiling.
- Binding doc tree wide removal of leading 0s from examples
- RTC binding documentation adding missing devices and some
consolidation of duplicated bindings
- Vendor prefix documentation for nutsboard, Silicon Storage Technology,
shimafuji, Tecon Microprocessor Technologies, DH electronics GmbH,
Opal Kelly, and Next Thing
-----BEGIN PGP SIGNATURE-----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=jgpN
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull DeviceTree updates from Rob Herring:
"A bigger diffstat than usual with the kbuild changes and a tree wide
fix in the binding documentation.
Summary:
- kbuild cleanups and improvements for dtbs
- Code clean-up of overlay code and fixing for some long standing
memory leak and race condition in applying overlays
- Improvements to DT memory usage making sysfs/kobjects optional and
skipping unflattening of disabled nodes. This is part of kernel
tinification efforts.
- Final piece of removing storing the full path for every DT node.
The prerequisite conversion of printk's to use device_node format
specifier happened in 4.14.
- Sync with current upstream dtc. This brings additional checks to
dtb compiling.
- Binding doc tree wide removal of leading 0s from examples
- RTC binding documentation adding missing devices and some
consolidation of duplicated bindings
- Vendor prefix documentation for nutsboard, Silicon Storage
Technology, shimafuji, Tecon Microprocessor Technologies, DH
electronics GmbH, Opal Kelly, and Next Thing"
* tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits)
dt-bindings: usb: add #phy-cells to usb-nop-xceiv
dt-bindings: Remove leading zeros from bindings notation
kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.lib
MIPS: dts: remove bogus bcm96358nb4ser.dtb from dtb-y entry
kbuild: clean up *.dtb and *.dtb.S patterns from top-level Makefile
.gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignore
.gitignore: sort normal pattern rules alphabetically
dt-bindings: add vendor prefix for Next Thing Co.
scripts/dtc: Update to upstream version v1.4.5-6-gc1e55a5513e9
of: dynamic: fix memory leak related to properties of __of_node_dup
of: overlay: make pr_err() string unique
of: overlay: pr_err from return NOTIFY_OK to overlay apply/remove
of: overlay: remove unneeded check for NULL kbasename()
of: overlay: remove a dependency on device node full_name
of: overlay: simplify applying symbols from an overlay
of: overlay: avoid race condition between applying multiple overlays
of: overlay: loosen overly strict phandle clash check
of: overlay: expand check of whether overlay changeset can be removed
of: overlay: detect cases where device tree may become corrupt
of: overlay: minor restructuring
...
Pull i2c updates from Wolfram Sang:
"This contains two bigger than usual tree-wide changes this time. They
all have proper acks, caused no merge conflicts in linux-next where
they have been for a while. They are namely:
- to-gpiod conversion of the i2c-gpio driver and its users (touching
arch/* and drivers/mfd/*)
- adding a sbs-manager based on I2C core updates to SMBus alerts
(touching drivers/power/*)
Other notable changes:
- i2c_boardinfo can now carry a dev_name to be used when the device
is created. This is because some devices in ACPI world need fixed
names to find the regulators.
- the designware driver got a long discussed overhaul of its PM
handling. img-scb and davinci got PM support, too.
- at24 driver has way better OF support. And it has a new maintainer.
Thanks Bartosz for stepping up!
The rest is regular driver updates and fixes"
* 'i2c/for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (55 commits)
ARM: sa1100: simpad: Correct I2C GPIO offsets
i2c: aspeed: Deassert reset in probe
eeprom: at24: Add OF device ID table
MAINTAINERS: new maintainer for AT24 driver
i2c: nuc900: remove platform_data, too
i2c: thunderx: Remove duplicate NULL check
i2c: taos-evm: Remove duplicate NULL check
i2c: Make i2c_unregister_device() NULL-aware
i2c: xgene-slimpro: Support v2
i2c: mpc: remove useless variable initialization
i2c: omap: Trigger bus recovery in lockup case
i2c: gpio: Add support for named gpios in DT
dt-bindings: i2c: i2c-gpio: Add support for named gpios
i2c: gpio: Local vars in probe
i2c: gpio: Augment all boardfiles to use open drain
i2c: gpio: Enforce open drain through gpiolib
gpio: Make it possible for consumers to enforce open drain
i2c: gpio: Convert to use descriptors
power: supply: sbs-message: fix some code style issues
power: supply: sbs-battery: remove unchecked return var
...
- turn dma_cache_sync into a dma_map_ops instance and remove
implementation that purely are dead because the architecture
doesn't support noncoherent allocations
- add a flag for busses that need DMA configuration (Robin Murphy)
-----BEGIN PGP SIGNATURE-----
iQI/BAABCAApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAloLSrYLHGhjaEBsc3Qu
ZGUACgkQD55TZVIEUYOMuQ//XXD94uNPYavrgXzGsAtg+I+LEm+xyk4T0dX5fxfj
amXX49MHoGemjsBgzJlkQMMFqwDEdkKyEuFnEuy6OeowYCyD6zW0MJ3MwP9OosNJ
PNTdGZIfSvxPYEW8cR9AdK3iQ2loMBZnYhd+O/oVjSugULLW2DNa7r2VRktcCKoh
8Ob/8gL6Y9xEYJBRszhrBwKTa/hU8IThxxozBFzN7I3LIKyFboSTcwXGLAHow43g
4anCTjWTaDcoU2JwY6UTRKRRTV+gD0ZRcsZfd8lNNb5rtMVZkBVOHbF14SMAmw1r
kSgRcU3+WIFPhK/8wBYqtGZZGnOgFBTHVeqow3AdS728pBWlWl8niTK0DiIgCd3m
qzScF6SqfN1bCZkZAy8FUV2l0DPYKS6lvyNkf00Eb2W/f6LEqAcjCi2QDDxRfaw+
Vm97nPUiM+uXNy/6KtAy6ChdprSqx12/edXPp7Y3H2rS/+Dmr6exeix+wb7QUN8W
JI7ZRHo4JLaJZk/XrZtGX/6jnN1Jo7vfApQOmYDY7kE1iGtOU/LQQj8gcZRVQxML
4soN6ivSmZX2k03LabWHpYQ8QiyCSYChLC+Az7rQH47LDLeu1IdTJu6orpXpaxyo
ymzEWlHbmF7mE66X4g/Up/eAYk2YLUA3rKLGVjAIaWDBzHftSFg5EaAnqMADC1G2
hSo=
=ALJf
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-4.15' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- turn dma_cache_sync into a dma_map_ops instance and remove
implementation that purely are dead because the architecture doesn't
support noncoherent allocations
- add a flag for busses that need DMA configuration (Robin Murphy)
* tag 'dma-mapping-4.15' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: turn dma_cache_sync into a dma_map_ops method
sh: make dma_cache_sync a no-op
xtensa: make dma_cache_sync a no-op
unicore32: make dma_cache_sync a no-op
powerpc: make dma_cache_sync a no-op
mn10300: make dma_cache_sync a no-op
microblaze: make dma_cache_sync a no-op
ia64: make dma_cache_sync a no-op
frv: make dma_cache_sync a no-op
x86: make dma_cache_sync a no-op
floppy: consolidate the dummy fd_cacheflush definition
drivers: flag buses which demand DMA configuration
Pull timer updates from Thomas Gleixner:
"Yet another big pile of changes:
- More year 2038 work from Arnd slowly reaching the point where we
need to think about the syscalls themself.
- A new timer function which allows to conditionally (re)arm a timer
only when it's either not running or the new expiry time is sooner
than the armed expiry time. This allows to use a single timer for
multiple timeout requirements w/o caring about the first expiry
time at the call site.
- A new NMI safe accessor to clock real time for the printk timestamp
work. Can be used by tracing, perf as well if required.
- A large number of timer setup conversions from Kees which got
collected here because either maintainers requested so or they
simply got ignored. As Kees pointed out already there are a few
trivial merge conflicts and some redundant commits which was
unavoidable due to the size of this conversion effort.
- Avoid a redundant iteration in the timer wheel softirq processing.
- Provide a mechanism to treat RTC implementations depending on their
hardware properties, i.e. don't inflict the write at the 0.5
seconds boundary which originates from the PC CMOS RTC to all RTCs.
No functional change as drivers need to be updated separately.
- The usual small updates to core code clocksource drivers. Nothing
really exciting"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits)
timers: Add a function to start/reduce a timer
pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday()
timer: Prepare to change all DEFINE_TIMER() callbacks
netfilter: ipvs: Convert timers to use timer_setup()
scsi: qla2xxx: Convert timers to use timer_setup()
block/aoe: discover_timer: Convert timers to use timer_setup()
ide: Convert timers to use timer_setup()
drbd: Convert timers to use timer_setup()
mailbox: Convert timers to use timer_setup()
crypto: Convert timers to use timer_setup()
drivers/pcmcia: omap1: Fix error in automated timer conversion
ARM: footbridge: Fix typo in timer conversion
drivers/sgi-xp: Convert timers to use timer_setup()
drivers/pcmcia: Convert timers to use timer_setup()
drivers/memstick: Convert timers to use timer_setup()
drivers/macintosh: Convert timers to use timer_setup()
hwrng/xgene-rng: Convert timers to use timer_setup()
auxdisplay: Convert timers to use timer_setup()
sparc/led: Convert timers to use timer_setup()
mips: ip22/32: Convert timers to use timer_setup()
...
Pull core locking updates from Ingo Molnar:
"The main changes in this cycle are:
- Another attempt at enabling cross-release lockdep dependency
tracking (automatically part of CONFIG_PROVE_LOCKING=y), this time
with better performance and fewer false positives. (Byungchul Park)
- Introduce lockdep_assert_irqs_enabled()/disabled() and convert
open-coded equivalents to lockdep variants. (Frederic Weisbecker)
- Add down_read_killable() and use it in the VFS's iterate_dir()
method. (Kirill Tkhai)
- Convert remaining uses of ACCESS_ONCE() to
READ_ONCE()/WRITE_ONCE(). Most of the conversion was Coccinelle
driven. (Mark Rutland, Paul E. McKenney)
- Get rid of lockless_dereference(), by strengthening Alpha atomics,
strengthening READ_ONCE() with smp_read_barrier_depends() and thus
being able to convert users of lockless_dereference() to
READ_ONCE(). (Will Deacon)
- Various micro-optimizations:
- better PV qspinlocks (Waiman Long),
- better x86 barriers (Michael S. Tsirkin)
- better x86 refcounts (Kees Cook)
- ... plus other fixes and enhancements. (Borislav Petkov, Juergen
Gross, Miguel Bernal Marin)"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits)
locking/x86: Use LOCK ADD for smp_mb() instead of MFENCE
rcu: Use lockdep to assert IRQs are disabled/enabled
netpoll: Use lockdep to assert IRQs are disabled/enabled
timers/posix-cpu-timers: Use lockdep to assert IRQs are disabled/enabled
sched/clock, sched/cputime: Use lockdep to assert IRQs are disabled/enabled
irq_work: Use lockdep to assert IRQs are disabled/enabled
irq/timings: Use lockdep to assert IRQs are disabled/enabled
perf/core: Use lockdep to assert IRQs are disabled/enabled
x86: Use lockdep to assert IRQs are disabled/enabled
smp/core: Use lockdep to assert IRQs are disabled/enabled
timers/hrtimer: Use lockdep to assert IRQs are disabled/enabled
timers/nohz: Use lockdep to assert IRQs are disabled/enabled
workqueue: Use lockdep to assert IRQs are disabled/enabled
irq/softirqs: Use lockdep to assert IRQs are disabled/enabled
locking/lockdep: Add IRQs disabled/enabled assertion APIs: lockdep_assert_irqs_enabled()/disabled()
locking/pvqspinlock: Implement hybrid PV queued/unfair locks
locking/rwlocks: Fix comments
x86/paravirt: Set up the virt_spin_lock_key after static keys get initialized
block, locking/lockdep: Assign a lock_class per gendisk used for wait_for_completion()
workqueue: Remove now redundant lock acquisitions wrt. workqueue flushes
...
The kexec/kdump tools need to know where the .bss is so it can be
included in the core dump. This allows vmcore-dmesg to have access to
the dmesg buffers of the crashed kernel as well as allowing the
debugger to examine variables in the bss section.
Add a request for the bss resource in addition to the already
requested code and data sections.
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Steven J. Hill <steven.hill@cavium.com>,
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17485/
Signed-off-by: James Hogan <jhogan@kernel.org>
__cmpxchg64_local_generic() is atomic only w.r.t tasks and interrupts
on the same CPU (that's what the 'local' means). We can't use it to
implement cmpxchg64() in SMP configurations.
So, for 32-bit SMP configurations:
- Don't define cmpxchg64()
- Don't enable HAVE_VIRT_CPU_ACCOUNTING_GEN, which requires it
Fixes: e2093c7b03 ("MIPS: Fall back to generic implementation of ...")
Fixes: bb877e96be ("MIPS: Add support for full dynticks CPU time accounting")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Deng-Cheng Zhu <dengcheng.zhu@mips.com>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.1+
Patchwork: https://patchwork.linux-mips.org/patch/17413/
Signed-off-by: James Hogan <jhogan@kernel.org>
HW interrupts triggered when irq_disable() were being ignored. Enable
resending HW interrupts as SW interrupts.
This was causing an issue where the interrupts waking the system up from
a suspend state were not calling their interrupt handlers.
Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16116/
Signed-off-by: James Hogan <jhogan@kernel.org>
Make wait_on_atomic_t() pass the TASK_* mode onto its action function as an
extra argument and make it 'unsigned int throughout.
Also, consolidate a bunch of identical action functions into a default
function that can do the appropriate thing for the mode.
Also, change the argument name in the bit_wait*() function declarations to
reflect the fact that it's the mode and not the bit number.
[Peter Z gives this a grudging ACK, but thinks that the whole atomic_t wait
should be done differently, though he's not immediately sure as to how]
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
cc: Ingo Molnar <mingo@kernel.org>
There are a few defines that manully shift a bit. Change these to using
the BIT() macro.
Signed-off-by: John Crispin <john@phrozen.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15322/
Signed-off-by: James Hogan <jhogan@kernel.org>
An invalid and duplicate define has gone unnoticed for some time. lets
remove it. The correct define is 3 lines below.
Fixes: 7e5873d375 ("MIPS: pci: Add MT7620a PCIE driver")
Signed-off-by: John Crispin <john@phrozen.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15320/
Signed-off-by: James Hogan <jhogan@kernel.org>
There is a typo inside the pinmux setup code. The function is called
refclk and not reclk.
Fixes: 53263a1c68 ("MIPS: ralink: add mt7628an support")
Signed-off-by: Mathias Kresin <dev@kresin.me>
Acked-by: John Crispin <john@phrozen.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.19+
Patchwork: https://patchwork.linux-mips.org/patch/16047/
Signed-off-by: James Hogan <jhogan@kernel.org>
According to the datasheet the REFCLK pin is shared with GPIO#37 and
the PERST pin is shared with GPIO#36.
Fixes: 53263a1c68 ("MIPS: ralink: add mt7628an support")
Signed-off-by: Mathias Kresin <dev@kresin.me>
Acked-by: John Crispin <john@phrozen.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.19+
Patchwork: https://patchwork.linux-mips.org/patch/16046/
Signed-off-by: James Hogan <jhogan@kernel.org>
Building 32-bit MIPS64r2 kernels produces warnings like the following
on certain toolchains (such as GNU assembler 2.24.90, but not GNU
assembler 2.28.51) since commit 22b8ba765a ("MIPS: Fix MIPS64 FP
save/restore on 32-bit kernels"), due to the exposure of fpu_save_16odd
from fpu_save_double and fpu_restore_16odd from fpu_restore_double:
arch/mips/kernel/r4k_fpu.S:47: Warning: float register should be even, was 1
...
arch/mips/kernel/r4k_fpu.S:59: Warning: float register should be even, was 1
...
This appears to be because .set mips64r2 does not change the FPU ABI to
64-bit when -march=mips64r2 (or e.g. -march=xlp) is provided on the
command line on that toolchain, from the default FPU ABI of 32-bit due
to the -mabi=32. This makes access to the odd FPU registers invalid.
Fix by explicitly changing the FPU ABI with .set fp=64 directives in
fpu_save_16odd and fpu_restore_16odd, and moving the undefine of fp up
in asmmacro.h so fp doesn't turn into $30.
Fixes: 22b8ba765a ("MIPS: Fix MIPS64 FP save/restore on 32-bit kernels")
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.0+: 22b8ba765a: MIPS: Fix MIPS64 FP save/restore on 32-bit kernels
Cc: <stable@vger.kernel.org> # 4.0+
Patchwork: https://patchwork.linux-mips.org/patch/17656/
If CONFIG_OF_ALL_DTBS is enabled, "make ARCH=arm64 dtbs" compiles each
DTB twice; one from arch/arm64/boot/dts/*/Makefile and the other from
the dtb-$(CONFIG_OF_ALL_DTBS) line in arch/arm64/boot/dts/Makefile.
It could be a race problem when building DTBS in parallel.
Another minor issue is CONFIG_OF_ALL_DTBS covers only *.dts in vendor
sub-directories, so this broke when Broadcom added one more hierarchy
in arch/arm64/boot/dts/broadcom/<soc>/.
One idea to fix the issues in a clean way is to move DTB handling
to Kbuild core scripts. Makefile.dtbinst already recognizes dtb-y
natively, so it should not hurt to do so.
Add $(dtb-y) to extra-y, and $(dtb-) as well if CONFIG_OF_ALL_DTBS is
enabled. All clutter things in Makefiles go away.
As a bonus clean-up, I also removed dts-dirs. Just use subdir-y
directly to traverse sub-directories.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
[robh: corrected BUILTIN_DTB to CONFIG_BUILTIN_DTB]
Signed-off-by: Rob Herring <robh@kernel.org>
arch/mips/boot/dts/brcm/bcm96358nb4ser.dts does not exist, so
we cannot build bcm96358nb4ser.dtb .
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Fixes: 695835511f ("MIPS: BMIPS: rename bcm96358nb4ser to bcm6358-neufbox4-sercom")
Cc: stable@vger.kernel.org # 4.9+
Acked-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Update the thread_info::syscall field when registers are modified via
ptrace to change or cancel the system call being entered.
This is important to allow seccomp and the syscall entry and exit trace
events to observe the new syscall number changed by the normal ptrace
hook or seccomp. That includes allowing seccomp's recheck of the system
call number after SECCOMP_RET_TRACE to notice if the syscall is changed
to a denied one, which happens in seccomp since commit ce6526e8af
("seccomp: recheck the syscall after RET_TRACE") in v4.8.
In the process of doing this, the logic to determine whether an indirect
system call is in progress (i.e. the O32 ABI's syscall()) is abstracted
into mips_syscall_is_indirect(), and a new mips_syscall_update_nr() is
used to update the thread_info::syscall based on the register state.
The following ptrace operations are updated:
- PTRACE_SETREGS (ptrace_setregs()).
- PTRACE_SETREGSET with NT_PRSTATUS (gpr32_set() and gpr64_set()).
- PTRACE_POKEUSR with 2/v0 or 4/a0 for indirect syscall
([compat_]arch_ptrace()).
Fixes: c2d9f17757 ("MIPS: Fix syscall_get_nr for the syscall exit tracing.")
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Lars Persson <larper@axis.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16995/
The MIPS syscall_trace_enter() allows the system call number to be
altered or cancelled by a ptrace tracer, via the normal ptrace hook
(PTRACE_SYSCALL) and changing the system call number register on entry,
and similarly via seccomp (PTRACE_EVENT_SECCOMP when a seccomp filter
returns SECCOMP_RET_TRACE).
Be sure to update the syscall local variable if this happens, so that
seccomp will filter the correct system call number if the normal ptrace
hook changes it first, and so that if either the normal ptrace hook or
seccomp change it the correct system call number is passed to the trace
event.
This won't have any effect until the next commit, which fixes ptrace to
update thread_info::syscall.
Fixes: c2d9f17757 ("MIPS: Fix syscall_get_nr for the syscall exit tracing.")
Signed-off-by: James Hogan <jhogan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Lars Persson <lars.persson@axis.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16996/
Fix a commit 7aeb753b53 ("MIPS: Implement task_user_regset_view.")
regression, then activated by commit 6a9c001b7e ("MIPS: Switch ELF
core dumper to use regsets.)", that caused n32 processes to dump o32
core files by failing to set the EF_MIPS_ABI2 flag in the ELF core file
header's `e_flags' member:
$ file tls-core
tls-core: ELF 32-bit MSB executable, MIPS, N32 MIPS64 rel2 version 1 (SYSV), [...]
$ ./tls-core
Aborted (core dumped)
$ file core
core: ELF 32-bit MSB core file MIPS, MIPS-I version 1 (SYSV), SVR4-style
$
Previously the flag was set as the result of a:
statement placed in arch/mips/kernel/binfmt_elfn32.c, however in the
regset case, i.e. when CORE_DUMP_USE_REGSET is set, ELF_CORE_EFLAGS is
no longer used by `fill_note_info' in fs/binfmt_elf.c, and instead the
`->e_flags' member of the regset view chosen is. We have the views
defined in arch/mips/kernel/ptrace.c, however only an o32 and an n64
one, and the latter is used for n32 as well. Consequently an o32 core
file is incorrectly dumped from n32 processes (the ELF32 vs ELF64 class
is chosen elsewhere, and the 32-bit one is correctly selected for n32).
Correct the issue then by defining an n32 regset view and using it as
appropriate. Issue discovered in GDB testing.
Fixes: 7aeb753b53 ("MIPS: Implement task_user_regset_view.")
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Djordje Todorovic <djordje.todorovic@rt-rk.com>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.13+
Patchwork: https://patchwork.linux-mips.org/patch/17617/
Signed-off-by: James Hogan <jhogan@kernel.org>
32-bit kernels can be configured to support MIPS64, in which case
neither CONFIG_64BIT or CONFIG_CPU_MIPS32_R* will be set. This causes
the CP0_Status.FR checks at the point of floating point register save
and restore to be compiled out, which results in odd FP registers not
being saved or restored to the task or signal context even when
CP0_Status.FR is set.
Fix the ifdefs to use CONFIG_CPU_MIPSR2 and CONFIG_CPU_MIPSR6, which are
enabled for the relevant revisions of either MIPS32 or MIPS64, along
with some other CPUs such as Octeon (r2), Loongson1 (r2), XLP (r2),
Loongson 3A R2.
The suspect code originates from commit 597ce1723e ("MIPS: Support for
64-bit FP with O32 binaries") in v3.14, however the code in
__enable_fpu() was consistent and refused to set FR=1, falling back to
software FPU emulation. This was suboptimal but should be functionally
correct.
Commit fcc53b5f6c ("MIPS: fpu.h: Allow 64-bit FPU on a 64-bit MIPS R6
CPU") in v4.2 (and stable tagged back to 4.0) later introduced the bug
by updating __enable_fpu() to set FR=1 but failing to update the other
similar ifdefs to enable FR=1 state handling.
Fixes: fcc53b5f6c ("MIPS: fpu.h: Allow 64-bit FPU on a 64-bit MIPS R6 CPU")
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.0+
Patchwork: https://patchwork.linux-mips.org/patch/16739/
Define virt_to_pfn() based on the existing definition of virt_to_page()
which already does a PFN_DOWN(vir_to_phys(kaddr)).
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15409/
Signed-off-by: James Hogan <jhogan@kernel.org>
Add support for the MIPSfpga platform to generic kernel.
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15846/
[jhogan@kernel.org: Use separate board-xilfpga.its.S. Add 32r2 and
little endian requires to board-xilfpga.config]
Signed-off-by: James Hogan <jhogan@kernel.org>
The default system type should be a MIPS generic kernel. In order to
include some level of board support, select a 32r2el generic defconfig
by default. The alternative would be to use "generic_defconfig" but
rather unintuitvely that is a bare bones configuration with no platform
support so is not usable in practice.
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14715/
Signed-off-by: James Hogan <jhogan@kernel.org>
The generic MIPS system type allows building a board agnostic kernel and
should be the default starting point for users, so set it as the default
system type in Kconfig.
Since ip22 is no longer the default, update ip22_defconfig to select
CONFIG_SGI_IP22.
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14714/
Signed-off-by: James Hogan <jhogan@kernel.org>
dwmmc driver deprecated num-slots and plan to get rid of it finally.
Just move a step to cleanup it from DT.
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: James Hartley <james.hartley@sondrel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16741/
Signed-off-by: James Hogan <jhogan@kernel.org>
Use setup_timer function instead of initializing timer with the function
and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17341/
Signed-off-by: James Hogan <jhogan@kernel.org>
Optimize `__read_64bit_c0_split' and reduce the instruction count by 1,
observing that a DSLL/DSRA pair by 32, is equivalent to SLL by 0, which
architecturally truncates the value requested to 32 bits on 64-bit MIPS
hardware regardless of whether the input operand is or is not a properly
sign-extended 32-bit value.
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Reviewed-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17399/
Signed-off-by: James Hogan <jhogan@kernel.org>
We need to add "clean-files" in Makfiles to clean up DT blobs, but we
often miss to do so.
Since there are no source files that end with .dtb or .dtb.S, so we
can clean-up those files from the top-level Makefile.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Most of DT files are compiled under arch/*/boot/dts/, but we have some
other directories, like drivers/of/unittest-data/. We often miss to
add gitignore patterns per directory. Since there are no source files
that end with .dtb or .dtb.S, we can ignore the patterns globally.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Without UPF_FIXED_TYPE, the data from the PORT_AR7 uart_config entry is
never copied, resulting in a dead port.
Fixes: 154615d554 ("MIPS: AR7: Use correct UART port type")
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
[jonas.gorski: add Fixes tag]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Cc: Nicolas Schichan <nschichan@freebox.fr>
Cc: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Cc: linux-mips@linux-mips.org
Cc: linux-serial@vger.kernel.org
Cc: <stable@vger.kernel.org>
Patchwork: https://patchwork.linux-mips.org/patch/17543/
Signed-off-by: James Hogan <jhogan@kernel.org>
When called from prom init code, ar7_gpio_init() will fail as it will
call gpiochip_add() which relies on a working kmalloc() to alloc
the gpio_desc array and kmalloc is not useable yet at prom init time.
Move ar7_gpio_init() to ar7_register_devices() (a device_initcall)
where kmalloc works.
Fixes: 14e85c0e69 ("gpio: remove gpio_descs global array")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Cc: Nicolas Schichan <nschichan@freebox.fr>
Cc: linux-mips@linux-mips.org
Cc: linux-serial@vger.kernel.org
Cc: <stable@vger.kernel.org> # 3.19+
Patchwork: https://patchwork.linux-mips.org/patch/17542/
Signed-off-by: James Hogan <jhogan@kernel.org>
Building an allnoconfig kernel based on the ralink platform results in
the following warning:
warning: (SOC_RT305X) selects USB_ARCH_HAS_HCD which has unmet direct dependencies (USB_SUPPORT)
This is because SOC_RT305X unconditionally selects USB_ARCH_HAS_HCD
which depends on USB_SUPPORT.
However USB_ARCH_HAS_HCD has been effectively obsolete since commit
d9ea21a779 ("usb: host: make USB_ARCH_HAS_?HCI obsolete") in 3.11.
USB_ARCH_HAS_HCD is now set by default whenever USB_SUPPORT is, so drop
the select to silence the warning.
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17618/
<linux/pci.h> defines struct pci_bus and struct pci_dev and includes the
struct resource definition before including <asm/pci.h>. Nobody includes
<asm/pci.h> directly, so they don't need their own declarations.
Remove the redundant struct pci_dev, pci_bus, resource declarations.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> # CRIS
Acked-by: Ralf Baechle <ralf@linux-mips.org> # MIPS
All users of pcibios_set_master() include <linux/pci.h>, which already has
a declaration. Remove the unnecessary declarations from the <asm/pci.h>
files.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> # CRIS
Acked-by: Ralf Baechle <ralf@linux-mips.org> # MIPS
The WLAN LED on the Linksys WRT54GSv1 is active low, but the software
treats it as active high. Fix the inverted logic.
Fixes: 7bb26b1691 ("MIPS: BCM47xx: Fix LEDs on WRT54GS V1.0")
Signed-off-by: Mirko Parthey <mirko.parthey@web.de>
Looks-ok-by: Rafał Miłecki <zajec5@gmail.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.17+
Patchwork: https://patchwork.linux-mips.org/patch/16071/
Signed-off-by: James Hogan <jhogan@kernel.org>
ASC1 is available on every Lantiq SoC (also AmazonSE) and should be
enabled like the other generic xway clocks instead of ASC0, which is
only available for AR9 and Danube.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: John Crispin <john@phrozen.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Felix Fietkau <nbd@nbd.name>
Cc: Martin Schiller <ms@dev.tdt.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16145/
[jhogan@kernel.org: Drop braces]
Signed-off-by: James Hogan <jhogan@kernel.org>
While the current kernel code in drivers/of/ allows developers to be
sloppy and use the status value "ok", the current DTSpec 0.1 makes it
clear that the only officially proper spelling is "okay", so adjust
the very small number of DTS files under arch/mips/.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17227/
Signed-off-by: James Hogan <jhogan@kernel.org>
Make the secondary switch clocks their own clocks. This allows proper
enable reference counting between SAR/XTM and the main switch clocks,
and controlling them individually from drivers.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: linux-mips@linux-mips.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-serial@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: bcm-kernel-feedback-list@broadcom.com
Patchwork: https://patchwork.linux-mips.org/patch/17332/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: James Hogan <jhogan@kernel.org>
Enable clkdev lookup support to allow us providing clocks under
different names to devices more easily, so we don't need to care
about clock name clashes anymore.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: linux-mips@linux-mips.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-serial@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: bcm-kernel-feedback-list@broadcom.com
Patchwork: https://patchwork.linux-mips.org/patch/17325/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: James Hogan <jhogan@kernel.org>
Fix occurences of unsigned integer variable declarations that are
not preferred by standards of checkpatch scripts. This removes a
significant number of checkpatch warnings for files in math-emu
directory (several files become completely warning-free), and thus
makes easier to spot (now and in the future) other, perhaps more
significant, checkpatch errors and warnings.
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@mips.com>
Reviewed-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Douglas Leung <douglas.leung@mips.com>
Cc: Goran Ferenc <goran.ferenc@mips.com>
Cc: "Maciej W. Rozycki" <macro@imgtec.com>
Cc: Manuel Lauss <manuel.lauss@gmail.com>
Cc: Miodrag Dinic <miodrag.dinic@mips.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Petar Jovanovic <petar.jovanovic@mips.com>
Cc: Raghu Gandham <raghu.gandham@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17582/
Signed-off-by: James Hogan <jhogan@kernel.org>
Fix final phase of <CLASS|MADDF|MSUBF|MAX|MIN|MAXA|MINA>.<D|S>
emulation. Provide proper generation of SIGFPE signal and updating
debugfs FP exception stats in cases of any exception flags set in
preceding phases of emulation.
CLASS.<D|S> instruction may generate "Unimplemented Operation" FP
exception. <MADDF|MSUBF>.<D|S> instructions may generate "Inexact",
"Unimplemented Operation", "Invalid Operation", "Overflow", and
"Underflow" FP exceptions. <MAX|MIN|MAXA|MINA>.<D|S> instructions
can generate "Unimplemented Operation" and "Invalid Operation" FP
exceptions.
The proper final processing of the cases when any FP exception
flag is set is achieved by replacing "break" statement with "goto
copcsr" statement. With such solution, this patch brings the final
phase of emulation of the above instructions consistent with the
one corresponding to the previously implemented emulation of other
related FPU instructions (ADD, SUB, etc.).
Fixes: 38db37ba06 ("MIPS: math-emu: Add support for the MIPS R6 CLASS FPU instruction")
Fixes: e24c3bec3e ("MIPS: math-emu: Add support for the MIPS R6 MADDF FPU instruction")
Fixes: 83d43305a1 ("MIPS: math-emu: Add support for the MIPS R6 MSUBF FPU instruction")
Fixes: a79f5f9ba5 ("MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction")
Fixes: 4e9561b20e ("MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction")
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Douglas Leung <douglas.leung@mips.com>
Cc: Goran Ferenc <goran.ferenc@mips.com>
Cc: "Maciej W. Rozycki" <macro@imgtec.com>
Cc: Miodrag Dinic <miodrag.dinic@mips.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Petar Jovanovic <petar.jovanovic@mips.com>
Cc: Raghu Gandham <raghu.gandham@mips.com>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.3+
Patchwork: https://patchwork.linux-mips.org/patch/17581/
Signed-off-by: James Hogan <jhogan@kernel.org>
In systems where the CPU id space is sparse, this allows a smaller
NR_CPUS to be chosen, thus keeping internal data structures smaller.
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Carlos Munoz <cmunoz@caviumnetworks.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17388/
[jhogan@kernel.org: Add depends on SMP to fix
"warning: symbol value '' invalid for MIPS_NR_CPU_NR_MAP"]
Signed-off-by: James Hogan <jhogan@kernel.org>
A selection of important MIPS fixes for 4.14, and some MAINTAINERS /
email address updates:
- Update imgtec.com -> mips.com email addresses (this trivially updates
comments in quite a few files, as well as MAINTAINERS)
- Update Pistachio SoC maintainership
- Fix NI 169445 build (new platform in 4.14)
- Fix EVA regression (4.14)
- Fix SMP-CPS build & preemption regressions (4.14)
- Fix SMP/hotplug deadlock & race (deadlock reintroduced 4.13)
- Fix ebpf_jit error return (4.13)
- Fix SMP-CMP build regressions (4.11 and 4.14)
- Fix bad UASM microMIPS encoding (3.16)
- Fix CM definitions (3.15)
-----BEGIN PGP SIGNATURE-----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=nqbK
-----END PGP SIGNATURE-----
Merge tag 'mips_fixes_4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips
Pull MIPS fixes from James Hogan:
"A selection of important MIPS fixes for 4.14, and some MAINTAINERS /
email address updates:
Maintainership updates:
- imgtec.com -> mips.com email addresses (this trivially updates
comments in quite a few files, as well as MAINTAINERS)
- Pistachio SoC maintainership update
Fixes:
- NI 169445 build (new platform in 4.14)
- EVA regression (4.14)
- SMP-CPS build & preemption regressions (4.14)
- SMP/hotplug deadlock & race (deadlock reintroduced 4.13)
- ebpf_jit error return (4.13)
- SMP-CMP build regressions (4.11 and 4.14)
- bad UASM microMIPS encoding (3.16)
- CM definitions (3.15)"
[ I had taken the email address updates separately, because I didn't
expect James to send a pull request, so those got applied twice. - Linus]
* tag 'mips_fixes_4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips:
MIPS: Update email address for Marcin Nowakowski
MIPS: smp-cmp: Fix vpe_id build error
MAINTAINERS: Update Pistachio platform maintainers
MIPS: smp-cmp: Use right include for task_struct
MIPS: Update Goldfish RTC driver maintainer email address
MIPS: Update RINT emulation maintainer email address
MIPS: CPS: Fix use of current_cpu_data in preemptible code
MIPS: SMP: Fix deadlock & online race
MIPS: bpf: Fix a typo in build_one_insn()
MIPS: microMIPS: Fix incorrect mask in insn_table_MM
MIPS: Fix CM region target definitions
MIPS: generic: Fix compilation error from include asm/mips-cpc.h
MIPS: Fix exception entry when CONFIG_EVA enabled
MIPS: generic: Fix NI 169445 its build
Update MIPS email addresses
MIPS will soon not be a part of Imagination Technologies, and as such
many @imgtec.com email addresses will no longer be valid. This patch
updates the addresses for those who:
- Have 10 or more patches in mainline authored using an @imgtec.com
email address, or any patches dated within the past year.
- Are still with Imagination but leaving as part of the MIPS business
unit, as determined from an internal email address list.
- Haven't already updated their email address (ie. JamesH) or expressed
a desire to be excluded (ie. Maciej).
- Acked v2 or earlier of this patch, which leaves Deng-Cheng, Matt &
myself.
New addresses are of the form firstname.lastname@mips.com, and all
verified against an internal email address list. An entry is added to
.mailmap for each person such that get_maintainer.pl will report the new
addresses rather than @imgtec.com addresses which will soon be dead.
Instances of the affected addresses throughout the tree are then
mechanically replaced with the new @mips.com address.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@mips.com>
Acked-by: Dengcheng Zhu <dengcheng.zhu@mips.com>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Matt Redfearn <matt.redfearn@mips.com>
Acked-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: trivial@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The mmap(2) syscall suffers from the ABI anti-pattern of not validating
unknown flags. However, proposals like MAP_SYNC need a mechanism to
define new behavior that is known to fail on older kernels without the
support. Define a new MAP_SHARED_VALIDATE flag pattern that is
guaranteed to fail on all legacy mmap implementations.
It is worth noting that the original proposal was for a standalone
MAP_VALIDATE flag. However, when that could not be supported by all
archs Linus observed:
I see why you *think* you want a bitmap. You think you want
a bitmap because you want to make MAP_VALIDATE be part of MAP_SYNC
etc, so that people can do
ret = mmap(NULL, size, PROT_READ | PROT_WRITE, MAP_SHARED
| MAP_SYNC, fd, 0);
and "know" that MAP_SYNC actually takes.
And I'm saying that whole wish is bogus. You're fundamentally
depending on special semantics, just make it explicit. It's already
not portable, so don't try to make it so.
Rename that MAP_VALIDATE as MAP_SHARED_VALIDATE, make it have a value
of 0x3, and make people do
ret = mmap(NULL, size, PROT_READ | PROT_WRITE, MAP_SHARED_VALIDATE
| MAP_SYNC, fd, 0);
and then the kernel side is easier too (none of that random garbage
playing games with looking at the "MAP_VALIDATE bit", but just another
case statement in that map type thing.
Boom. Done.
Similar to ->fallocate() we also want the ability to validate the
support for new flags on a per ->mmap() 'struct file_operations'
instance basis. Towards that end arrange for flags to be generically
validated against a mmap_supported_flags exported by 'struct
file_operations'. By default all existing flags are implicitly
supported, but new flags require MAP_SHARED_VALIDATE and
per-instance-opt-in.
Cc: Jan Kara <jack@suse.cz>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Suggested-by: Christoph Hellwig <hch@lst.de>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly. Adds a static variable to hold timeout
value.
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-mips@linux-mips.org
Signed-off-by: Kees Cook <keescook@chromium.org>
MIPS is no longer part of Imagination Technologies and my @imgtec.com
address will soon stop working. Update any files containing my address
as well as the .mailmap to point to my new @mips.com address.
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/17579/
Signed-off-by: James Hogan <jhogan@kernel.org>
Many user space API headers have licensing information, which is either
incomplete, badly formatted or just a shorthand for referring to the
license under which the file is supposed to be. This makes it hard for
compliance tools to determine the correct license.
Update these files with an SPDX license identifier. The identifier was
chosen based on the license information in the file.
GPL/LGPL licensed headers get the matching GPL/LGPL SPDX license
identifier with the added 'WITH Linux-syscall-note' exception, which is
the officially assigned exception identifier for the kernel syscall
exception:
NOTE! This copyright does *not* cover user programs that use kernel
services by normal system calls - this is merely considered normal use
of the kernel, and does *not* fall under the heading of "derived work".
This exception makes it possible to include GPL headers into non GPL
code, without confusing license compliance tools.
Headers which have either explicit dual licensing or are just licensed
under a non GPL license are updated with the corresponding SPDX
identifier and the GPLv2 with syscall exception identifier. The format
is:
((GPL-2.0 WITH Linux-syscall-note) OR SPDX-ID-OF-OTHER-LICENSE)
SPDX license identifiers are a legally binding shorthand, which can be
used instead of the full boiler plate text. The update does not remove
existing license information as this has to be done on a case by case
basis and the copyright holders might have to be consulted. This will
happen in a separate step.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne. See the previous patch in this series for the
methodology of how this patch was researched.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Many user space API headers are missing licensing information, which
makes it hard for compliance tools to determine the correct license.
By default are files without license information under the default
license of the kernel, which is GPLV2. Marking them GPLV2 would exclude
them from being included in non GPLV2 code, which is obviously not
intended. The user space API headers fall under the syscall exception
which is in the kernels COPYING file:
NOTE! This copyright does *not* cover user programs that use kernel
services by normal system calls - this is merely considered normal use
of the kernel, and does *not* fall under the heading of "derived work".
otherwise syscall usage would not be possible.
Update the files which contain no license information with an SPDX
license identifier. The chosen identifier is 'GPL-2.0 WITH
Linux-syscall-note' which is the officially assigned identifier for the
Linux syscall exception. SPDX license identifiers are a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne. See the previous patch in this series for the
methodology of how this patch was researched.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The smp-cmp build has been (further) broken since commit 856fbcee60
("MIPS: Store core & VP IDs in GlobalNumber-style variable") in
v4.14-rc1 like so:
arch/mips/kernel/smp-cmp.c: In function ‘cmp_init_secondary’:
arch/mips/kernel/smp-cmp.c:53:4: error: ‘struct cpuinfo_mips’ has no member named ‘vpe_id’
c->vpe_id = (read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) &
^
Fix by replacing vpe_id with cpu_set_vpe_id().
Fixes: 856fbcee60 ("MIPS: Store core & VP IDs in GlobalNumber-style variable")
Signed-off-by: James Hogan <jhogan@kernel.org>
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17569/
Signed-off-by: James Hogan <jhogan@kernel.org>
When task_struct was moved, this MIPS code was neglected. Evidently
nobody is using it anymore. This fixes this build error:
In file included from ./arch/mips/include/asm/thread_info.h:15:0,
from ./include/linux/thread_info.h:37,
from ./include/asm-generic/current.h:4,
from ./arch/mips/include/generated/asm/current.h:1,
from ./include/linux/sched.h:11,
from arch/mips/kernel/smp-cmp.c:22:
arch/mips/kernel/smp-cmp.c: In function ‘cmp_boot_secondary’:
./arch/mips/include/asm/processor.h:384:41: error: implicit declaration
of function ‘task_stack_page’ [-Werror=implicit-function-declaration]
#define __KSTK_TOS(tsk) ((unsigned long)task_stack_page(tsk) + \
^
arch/mips/kernel/smp-cmp.c:84:21: note: in expansion of macro ‘__KSTK_TOS’
unsigned long sp = __KSTK_TOS(idle);
^~~~~~~~~~
Fixes: f3ac606719 ("sched/headers: Move task-stack related APIs from <linux/sched.h> to <linux/sched/task_stack.h>")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: <stable@vger.kernel.org> # 4.11+
Patchwork: https://patchwork.linux-mips.org/patch/17522/
Signed-off-by: James Hogan <jhogan@kernel.org>
Commit 1ec9dd80be ("MIPS: CPS: Detect CPUs in secondary clusters")
added a check in cps_boot_secondary() that the secondary being booted is
in the same cluster as the CPU running this code. This check is
performed using current_cpu_data without disabling preemption. As such
when CONFIG_PREEMPT=y, a BUG is triggered:
[ 57.991693] BUG: using smp_processor_id() in preemptible [00000000] code: hotplug/1749
<snip>
[ 58.063077] Call Trace:
[ 58.065842] [<8040cdb4>] show_stack+0x84/0x114
[ 58.070830] [<80b11b38>] dump_stack+0xf8/0x140
[ 58.075796] [<8079b12c>] check_preemption_disabled+0xec/0x118
[ 58.082204] [<80415110>] cps_boot_secondary+0x84/0x44c
[ 58.087935] [<80413a14>] __cpu_up+0x34/0x98
[ 58.092624] [<80434240>] bringup_cpu+0x38/0x114
[ 58.097680] [<80434af0>] cpuhp_invoke_callback+0x168/0x8f0
[ 58.103801] [<804362d0>] _cpu_up+0x154/0x1c8
[ 58.108565] [<804363dc>] do_cpu_up+0x98/0xa8
[ 58.113333] [<808261f8>] device_online+0x84/0xc0
[ 58.118481] [<80826294>] online_store+0x60/0x98
[ 58.123562] [<8062261c>] kernfs_fop_write+0x158/0x1d4
[ 58.129196] [<805a2ae4>] __vfs_write+0x4c/0x168
[ 58.134247] [<805a2dc8>] vfs_write+0xe0/0x190
[ 58.139095] [<805a2fe0>] SyS_write+0x68/0xc4
[ 58.143854] [<80415d58>] syscall_common+0x34/0x58
In reality we don't currently support running the kernel on CPUs not in
cluster 0, so the answer to cpu_cluster(¤t_cpu_data) will always
be 0, even if this task being preempted and continues running on a
different CPU. Regardless, the BUG should not be triggered, so fix this
by switching to raw_current_cpu_data. When multicluster support lands
upstream this check will need removing or changing anyway.
Fixes: 1ec9dd80be ("MIPS: CPS: Detect CPUs in secondary clusters")
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Reviewed-by: Paul Burton <paul.burton@mips.com>
CC: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17563/
Signed-off-by: James Hogan <jhogan@kernel.org>
Commit 6f542ebeae ("MIPS: Fix race on setting and getting
cpu_online_mask") effectively reverted commit 8f46cca1e6 ("MIPS: SMP:
Fix possibility of deadlock when bringing CPUs online") and thus has
reinstated the possibility of deadlock.
The commit was based on testing of kernel v4.4, where the CPU hotplug
core code issued a BUG() if the starting CPU is not marked online when
the boot CPU returns from __cpu_up. The commit fixes this race (in
v4.4), but re-introduces the deadlock situation.
As noted in the commit message, upstream differs in this area. Commit
8df3e07e7f ("cpu/hotplug: Let upcoming cpu bring itself fully up")
adds a completion event in the CPU hotplug core code, making this race
impossible. However, people were unhappy with relying on the core code
to do the right thing.
To address the issues both commits were trying to fix, add a second
completion event in the MIPS smp hotplug path. It removes the
possibility of a race, since the MIPS smp hotplug code now synchronises
both the boot and secondary CPUs before they return to the hotplug core
code. It also addresses the deadlock by ensuring that the secondary CPU
is not marked online before it's counters are synchronised.
This fix should also be backported to fix the race condition introduced
by the backport of commit 8f46cca1e6 ("MIPS: SMP: Fix possibility of
deadlock when bringing CPUs online"), through really that race only
existed before commit 8df3e07e7f ("cpu/hotplug: Let upcoming cpu
bring itself fully up").
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Fixes: 6f542ebeae ("MIPS: Fix race on setting and getting cpu_online_mask")
CC: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nokia.com>
Cc: <stable@vger.kernel.org> # v4.1+: 8f46cca1e6: "MIPS: SMP: Fix possibility of deadlock when bringing CPUs online"
Cc: <stable@vger.kernel.org> # v4.1+: a00eeede50: "MIPS: SMP: Use a completion event to signal CPU up"
Cc: <stable@vger.kernel.org> # v4.1+: 6f542ebeae: "MIPS: Fix race on setting and getting cpu_online_mask"
Cc: <stable@vger.kernel.org> # v4.1+
Patchwork: https://patchwork.linux-mips.org/patch/17376/
Signed-off-by: James Hogan <jhogan@kernel.org>
It seems that this is a typo error and the proper bit masking is
"RT | RS" instead of "RS | RS".
This issue was detected with the help of Coccinelle.
Fixes: d6b3314b49 ("MIPS: uasm: Add lh uam instruction")
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Reviewed-by: James Hogan <jhogan@kernel.org>
Cc: <stable@vger.kernel.org> # 3.16+
Patchwork: https://patchwork.linux-mips.org/patch/17551/
Signed-off-by: James Hogan <jhogan@kernel.org>
The default CM target field in the GCR_BASE register is encoded with 0
meaning memory & 1 being reserved. However the definitions we use for
those bits effectively get these two values backwards - likely because
they were copied from the definitions for the CM regions where the
target is encoded differently. This results in use setting up GCR_BASE
with the reserved target value by default, rather than targeting memory
as intended. Although we currently seem to get away with this it's not a
great idea to rely upon.
Fix this by changing our macros to match the documentated target values.
The incorrect encoding became used as of commit 9f98f3dd0c ("MIPS: Add
generic CM probe & access code") in the Linux v3.15 cycle, and was
likely carried forwards from older but unused code introduced by
commit 39b8d52542 ("[MIPS] Add support for MIPS CMP platform.") in the
v2.6.26 cycle.
Fixes: 9f98f3dd0c ("MIPS: Add generic CM probe & access code")
Signed-off-by: Paul Burton <paul.burton@mips.com>
Reported-by: Matt Redfearn <matt.redfearn@mips.com>
Reviewed-by: James Hogan <jhogan@kernel.org>
Cc: Matt Redfearn <matt.redfearn@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # v3.15+
Patchwork: https://patchwork.linux-mips.org/patch/17562/
Signed-off-by: James Hogan <jhogan@kernel.org>
Commit e83f7e02af ("MIPS: CPS: Have asm/mips-cps.h include CM & CPC
headers") adds a #error to arch/mips/include/asm/mips-cpc.h if it is
included directly. While this commit replaced almost all direct includes
of mips-cm.h and mips-cpc.h, 2 remain.
With some defconfigs, mips-cps.h is indirectly included before
mips-cpc.h, but in others this results in compilation errors:
In file included from arch/mips/generic/init.c:23:0:
./arch/mips/include/asm/mips-cpc.h:12:3: error: #error Please include
asm/mips-cps.h rather than asm/mips-cpc.h
# error Please include asm/mips-cps.h rather than asm/mips-cpc.h
In file included from arch/mips/kernel/smp.c:23:0:
./arch/mips/include/asm/mips-cpc.h:12:3: error: #error Please include
asm/mips-cps.h rather than asm/mips-cpc.h
# error Please include asm/mips-cps.h rather than asm/mips-cpc.h
In both cases, fix this by including mips-cps.h instead.
Fixes: e83f7e02af ("MIPS: CPS: Have asm/mips-cps.h include CM & CPC headers")
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/17492/
Signed-off-by: James Hogan <jhogan@kernel.org>
Commit 9fef686863 ("MIPS: Make SAVE_SOME more standard") made several
changes to the order in which registers are saved in the SAVE_SOME
macro, used by exception handlers to save the processor state. In
particular, it removed the
move k1, sp
in the delay slot of the branch testing if the processor is already in
kernel mode. This is replaced later in the macro by a
move k0, sp
When CONFIG_EVA is disabled, this instruction actually appears in the
delay slot of the branch. However, when CONFIG_EVA is enabled, instead
the RPS workaround of
MFC0 k0, CP0_ENTRYHI
appears in the delay slot. This results in k0 not containing the stack
pointer, but some unrelated value, which is then saved to the kernel
stack. On exit from the exception, this bogus value is restored to the
stack pointer, resulting in an OOPS.
Fix this by moving the save of SP in k0 explicitly in the delay slot of
the branch, outside of the CONFIG_EVA section, restoring the expected
instruction ordering when CONFIG_EVA is active.
Fixes: 9fef686863 ("MIPS: Make SAVE_SOME more standard")
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Reported-by: Vladimir Kondratiev <vladimir.kondratiev@intel.com>
Reviewed-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: James Hogan <jhogan@kernel.org>
Patchwork: https://patchwork.linux-mips.org/patch/17471/
Signed-off-by: James Hogan <jhogan@kernel.org>
Since commit 04a85e087a ("MIPS: generic: Move NI 169445 FIT image
source to its own file"), a generic 32r2el_defconfig kernel fails to
build with the following build error:
ITB arch/mips/boot/vmlinux.gz.itb
Error: arch/mips/boot/vmlinux.gz.its:111.1-2 syntax error
FATAL ERROR: Unable to parse input tree
mkimage Can't read arch/mips/boot/vmlinux.gz.itb.tmp: Invalid argument
Fix arch/mips/generic/board-ni169445.its.S to include the necessary "/"
node path before the first open brace.
The original issue in arch/mips/generic/vmlinux.its.S was fixed directly
in the original commit 7aacf86b75 ("MIPS: NI 169445 board support")
after https://patchwork.linux-mips.org/patch/16941/ was submitted, but
the separate its.S file wasn't correctly fixed when resolving the
conflict in commit 04a85e087a ("MIPS: generic: Move NI 169445 FIT
image source to its own file").
Fixes: 04a85e087a ("MIPS: generic: Move NI 169445 FIT image source to its own file")
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Nathan Sullivan <nathan.sullivan@ni.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17561/
Signed-off-by: James Hogan <jhogan@kernel.org>
MIPS will soon not be a part of Imagination Technologies, and as such
many @imgtec.com email addresses will no longer be valid. This patch
updates the addresses for those who:
- Have 10 or more patches in mainline authored using an @imgtec.com
email address, or any patches dated within the past year.
- Are still with Imagination but leaving as part of the MIPS business
unit, as determined from an internal email address list.
- Haven't already updated their email address (ie. JamesH) or expressed
a desire to be excluded (ie. Maciej).
- Acked v2 or earlier of this patch, which leaves Deng-Cheng, Matt &
myself.
New addresses are of the form firstname.lastname@mips.com, and all
verified against an internal email address list. An entry is added to
.mailmap for each person such that get_maintainer.pl will report the new
addresses rather than @imgtec.com addresses which will soon be dead.
Instances of the affected addresses throughout the tree are then
mechanically replaced with the new @mips.com address.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@mips.com>
Acked-by: Dengcheng Zhu <dengcheng.zhu@mips.com>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Matt Redfearn <matt.redfearn@mips.com>
Acked-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: trivial@kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17540/
Signed-off-by: James Hogan <jhogan@kernel.org>
We now handle the open drain mode internally in the I2C GPIO
driver, but we will get warnings from the gpiolib that we
override the default mode of the line so it becomes open
drain.
We can fix all in-kernel users by simply passing the right
flag along in the descriptor table, and we already touched
all of these files in the series so let's just tidy it up.
Cc: Steven Miao <realmz6@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Wu, Aaron <Aaron.Wu@analog.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This converts the GPIO-based I2C-driver to using GPIO
descriptors instead of the old global numberspace-based
GPIO interface. We:
- Convert the driver to unconditionally grab two GPIOs
from the device by index 0 (SDA) and 1 (SCL) which
will work fine with device tree and descriptor tables.
The existing device trees will continue to work just
like before, but without any roundtrip through the
global numberspace.
- Brutally convert all boardfiles still passing global
GPIOs by registering descriptor tables associated with
the devices instead so this driver does not need to keep
supporting passing any GPIO numbers as platform data.
There is no stepwise approach as elegant as this, I
strongly prefer this big hammer over any antsteps for this
conversion. This way the old GPIO numbers go away and
NEVER COME BACK.
Special conversion for the different boards utilizing
I2C-GPIO:
- EP93xx (arch/arm/mach-ep93xx): pretty straight forward as
all boards were using the same two GPIO lines, just define
these two in a lookup table for "i2c-gpio" and register
these along with the device. None of them define any
other platform data so just pass NULL as platform data.
This platform selects GPIOLIB so all should be smooth.
The pins appear on a gpiochip for bank "G" as pins 1 (SDA)
and 0 (SCL).
- IXP4 (arch/arm/mach-ixp4): descriptor tables have to
be registered for each board separately. They all use
"IXP4XX_GPIO_CHIP" so it is pretty straight forward.
Most board define no other platform data than SCL/SDA
so they can drop the #include of <linux/i2c-gpio.h> and
assign NULL to platform data.
The "goramo_mlr" (Goramo Multilink Router) board is a bit
worrisome: it implements its own I2C bit-banging in the
board file, and optionally registers an I2C serial port,
but claims the same GPIO lines for itself in the board file.
This is not going to work: there will be competition for the
GPIO lines, so delete the optional extra I2C bus instead, no
I2C devices are registered on it anyway, there are just hints
that it may contain an EEPROM that may be accessed from
userspace. This needs to be fixed up properly by the serial
clock using I2C emulation so drop a note in the code.
- KS8695 board acs5k (arch/arm/mach-ks8695/board-acs5.c)
has some platform data in addition to the pins so it needs to
be kept around sans GPIO lines. Its GPIO chip is named
"KS8695" and the arch selects GPIOLIB.
- PXA boards (arch/arm/mach-pxa/*) use some of the platform
data so it needs to be preserved here. The viper board even
registers two GPIO I2Cs. The gpiochip is named "gpio-pxa" and
the arch selects GPIOLIB.
- SA1100 Simpad (arch/arm/mach-sa1100/simpad.c) defines a GPIO
I2C bus, and the arch selects GPIOLIB.
- Blackfin boards (arch/blackfin/bf533 etc) for these I assume
their I2C GPIOs refer to the local gpiochip defined in
arch/blackfin/kernel/bfin_gpio.c names "BFIN-GPIO".
The arch selects GPIOLIB. The boards get spiked with
IF_ENABLED(I2C_GPIO) but that is a side effect of it
being like that already (I would just have Kconfig select
I2C_GPIO and get rid of them all.) I also delete any
platform data set to 0 as it will get that value anyway
from static declartions of platform data.
- The MIPS selects GPIOLIB and the Alchemy machine is using
two local GPIO chips, one of them has a GPIO I2C. We need
to adjust the local offset from the global number space here.
The ATH79 has a proper GPIO driver in drivers/gpio/gpio-ath79.c
and AFAICT the chip is named "ath79-gpio" and the PB44
PCF857x expander spawns from this on GPIO 1 and 0. The latter
board only use the platform data to specify pins so it can be
cut altogether after this.
- The MFD Silicon Motion SM501 is a special case. It dynamically
spawns an I2C bus off the MFD using sm501_create_subdev().
We use an approach to dynamically create a machine descriptor
table and attach this to the "SM501-LOW" or "SM501-HIGH"
gpiochip. We use chip-local offsets to grab the right lines.
We can get rid of two local static inline helpers as part
of this refactoring.
Cc: Steven Miao <realmz6@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Ben Dooks <ben.dooks@codethink.co.uk>
Cc: Heiko Schocher <hs@denx.de>
Acked-by: Wu, Aaron <Aaron.Wu@analog.com>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Please do not apply this to mainline directly, instead please re-run the
coccinelle script shown below and apply its output.
For several reasons, it is desirable to use {READ,WRITE}_ONCE() in
preference to ACCESS_ONCE(), and new code is expected to use one of the
former. So far, there's been no reason to change most existing uses of
ACCESS_ONCE(), as these aren't harmful, and changing them results in
churn.
However, for some features, the read/write distinction is critical to
correct operation. To distinguish these cases, separate read/write
accessors must be used. This patch migrates (most) remaining
ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following
coccinelle script:
----
// Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and
// WRITE_ONCE()
// $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch
virtual patch
@ depends on patch @
expression E1, E2;
@@
- ACCESS_ONCE(E1) = E2
+ WRITE_ONCE(E1, E2)
@ depends on patch @
expression E;
@@
- ACCESS_ONCE(E)
+ READ_ONCE(E)
----
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: davem@davemloft.net
Cc: linux-arch@vger.kernel.org
Cc: mpe@ellerman.id.au
Cc: shuah@kernel.org
Cc: snitzer@redhat.com
Cc: thor.thayer@linux.intel.com
Cc: tj@kernel.org
Cc: viro@zeniv.linux.org.uk
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
After we removed all the dead wood it turns out only two architectures
actually implement dma_cache_sync as a real op: mips and parisc. Add
a cache_sync method to struct dma_map_ops and implement it for the
mips defualt DMA ops, and the parisc pa11 ops.
Note that arm, arc and openrisc support DMA_ATTR_NON_CONSISTENT, but
never provided a functional dma_cache_sync implementations, which
seems somewhat odd.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Netlink mmap support and the relevant CONFIG_NETLINK_MMAP option have been
reverted by commit d1b4c689d4 ("netlink:
remove mmapped netlink support").
Remove the occurrence of CONFIG_NETLINK_MMAP from db1xxx_defconfig.
Signed-off-by: Nikitas Angelinas <nikitas.angelinas@gmail.com>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Florian Westphal <fw@strlen.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: Jiri Kosina <trivial@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The arch_{read,spin,write}_lock_flags() macros are simply mapped to the
non-flags versions by the majority of architectures, so do this in core
code and remove the dummy implementations. Also remove the implementation
in spinlock_up.h, since all callers of do_raw_spin_lock_flags() call
local_irq_save(flags) anyway.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: paulmck@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/1507055129-12300-4-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
arch_{read,spin,write}_relax() are defined as cpu_relax() by the core
code, so architectures that can't do better (i.e. most of them) don't
need to bother with the dummy definitions.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: paulmck@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/1507055129-12300-3-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The FPU emulator includes 2 calls to pr_err() which are triggered by
invalid instruction encodings for MIPSr6 cmp.cond.fmt instructions.
These cases are not kernel errors, merely invalid instructions which are
already handled by delivering a SIGILL which will provide notification
that something failed in cases where that makes sense.
In cases where that SIGILL is somewhat expected & being handled, for
example when crashme happens to generate one of the affected bad
encodings, the message is printed with no useful context about what
triggered it & spams the kernel log for no good reason.
Remove the pr_err() calls to make crashme run silently & treat the bad
encodings the same way we do others, with a SIGILL & no further kernel
log output.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: f8c3c6717a ("MIPS: math-emu: Add support for the CMP.condn.fmt R6 instruction")
Cc: linux-mips@linux-mips.org
Cc: stable <stable@vger.kernel.org> # v4.3+
Patchwork: https://patchwork.linux-mips.org/patch/17253/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
When configuring the kernel using one of the generic MIPS defconfig
targets, the generic-board-config.sh script is used to check
requirements listed in board config fragments against a reference config
in order to determine which board config fragments to merge into the
final config.
When specifying O= to configure in a directory other than the kernel
source directory, this generic-board-config.sh script is invoked in the
directory that we are configuring in (ie. the directory that O equals),
and the path to the reference config is relative to the current
directory. The script then changes the current directory to the source
tree, which unfortunately breaks later access to the reference file
since its path is relative to a directory that is no longer the current
working directory. This results in configuration failing with errors
such as:
$ make ARCH=mips O=tmp 32r2_defconfig
make[1]: Entering directory '/home/pburton/src/linux/tmp'
Using ../arch/mips/configs/generic_defconfig as base
Merging ../arch/mips/configs/generic/32r2.config
Merging ../arch/mips/configs/generic/eb.config
grep: ./.config.32r2_defconfig: No such file or directory
grep: ./.config.32r2_defconfig: No such file or directory
The base file '.config' does not exist. Exit.
make[1]: *** [arch/mips/Makefile:505: 32r2_defconfig] Error 1
make[1]: Leaving directory '/home/pburton/src/linux-ingenic/tmp'
make: *** [Makefile:145: sub-make] Error 2
Fix this by avoiding changing the working directory in
generic-board-config.sh, instead using full paths to files under
$(srctree)/ where necessary.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: 27e0d4b051 ("MIPS: generic: Allow filtering enabled boards by requirements")
Cc: linux-mips@linux-mips.org
Cc: kbuild test robot <fengguang.wu@intel.com>
Cc: kbuild-all@01.org
Patchwork: https://patchwork.linux-mips.org/patch/17231/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Commit 8263db4d77 ("MIPS: cmpxchg: Implement __cmpxchg() as a
function") refactored our implementation of __cmpxchg() to be a function
rather than a macro, with the aim of making it easier to read & modify.
Unfortunately the commit breaks use of cmpxchg() for signed 32 bit
values when we have a 64 bit kernel with kernel_uses_llsc == false,
because:
- In cmpxchg_local() we cast the old value to the type the pointer
points to, and then to an unsigned long. If the pointer points to a
signed type smaller than 64 bits then the old value will be sign
extended to 64 bits. That is, bits beyond the size of the pointed to
type will be set to 1 if the old value is negative. In the case of a
signed 32 bit integer with a negative value, bits 63:32 will all be
set.
- In __cmpxchg_asm() we load the value from memory, ie. dereference the
pointer, and store the value as an unsigned integer (__ret) whose
size matches the pointer. For a 32 bit cmpxchg() this means we store
the value in a u32, because the pointer provided to __cmpxchg_asm()
by __cmpxchg() is of type volatile u32 *.
- __cmpxchg_asm() then checks whether the value in memory (__ret)
matches the provided old value, by comparing the two values. This
results in the u32 being promoted to a 64 bit unsigned long to match
the old argument - however because both types are unsigned the value
is zero extended, which does not match the sign extension performed
on the old value in cmpxchg_local() earlier.
This mismatch means that unfortunate cmpxchg() calls can incorrectly
fail for 64 bit kernels with kernel_uses_llsc == false. This is the case
on at least non-SMP Cavium Octeon kernels, which hardcode
kernel_uses_llsc in their cpu-feature-overrides.h header. Using a
v4.13-rc7 kernel configured using cavium_octeon_defconfig with SMP
manually disabled, this presents itself as oddity when we reach
userland - for example:
can't run '/bin/mount': Text file busy
can't run '/bin/mkdir': Text file busy
can't run '/bin/mkdir': Text file busy
can't run '/bin/mount': Text file busy
can't run '/bin/hostname': Text file busy
can't run '/etc/init.d/rcS': Text file busy
can't run '/sbin/getty': Text file busy
can't run '/sbin/getty': Text file busy
It appears that some part of the init process, which is in this case
buildroot's busybox init, is running successfully. It never manages to
reach the login prompt though, and complains about /sbin/getty being
busy repeatedly and indefinitely.
Fix this by casting the old value provided to __cmpxchg_asm() to an
appropriately sized unsigned integer, such that we consistently
zero-extend avoiding the mismatch. The __cmpxchg_small() case for 8 & 16
bit values is unaffected because __cmpxchg_small() already masks
provided values appropriately.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: 8263db4d77 ("MIPS: cmpxchg: Implement __cmpxchg() as a function")
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17226/
Cc: linux-mips@linux-mips.org
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Flushing the writes lets other CPUs waiting for the lock to get it sooner.
Signed-off-by: Chad Reese <kreese@caviumnetworks.com>
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17289/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The only user of thread_saved_pc() in non-arch-specific code was removed
in commit 8243d55977 ("sched/core: Remove pointless printout in
sched_show_task()"), so it no longer needs to be globally defined for
MIPS and can be made static.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17303/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Now that ethernet support is in the kernel, add the option to use a
rootfs over NFS to enable automated testing of upstream kernels on a
Ci20.
Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Harvey Hunt <harveyhuntnexus@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17314/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Set the default number of RX and TX queues due to
the recent changes of stmmac driver.
Otherwise the ethernet will crash once it starts.
Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17452/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Compiling ebpf_jit.c with gcc 4.9 results in a (likely spurious)
compiler warning, as gcc has detected that the variable "target" may be
used uninitialised. Since -Werror is active, this is treated as an error
and causes a kernel build failure whenever CONFIG_MIPS_EBPF_JIT is
enabled.
arch/mips/net/ebpf_jit.c: In function 'build_one_insn':
arch/mips/net/ebpf_jit.c:1118:80: error: 'target' may be used
uninitialized in this function [-Werror=maybe-uninitialized]
emit_instr(ctx, j, target);
^
cc1: all warnings being treated as errors
Fix this by initialising "target" to 0. If it really is used
uninitialised this would result in a jump to 0 and a detectable run time
failure.
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Fixes: b6bd53f9c4 ("MIPS: Add missing file for eBPF JIT.")
Cc: James Hogan <james.hogan@imgtec.com>
Cc: David Daney <david.daney@cavium.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: <stable@vger.kernel.org> # v4.13+
Patchwork: https://patchwork.linux-mips.org/patch/17375/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The expire and data arguments of DEFINE_TIMER are only used in two places
and are ignored by the code (malta-display.c only uses mod_timer(),
never add_timer(), so the preset expires value is ignored). Set both
sets of arguments to zero.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Guenter Roeck <linux@roeck-us.net> # for watchdog parts
Cc: linux-mips@linux-mips.org
Cc: Petr Mladek <pmladek@suse.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: linux1394-devel@lists.sourceforge.net
Cc: linux-s390@vger.kernel.org
Cc: linux-wireless@vger.kernel.org
Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com>
Cc: linux-scsi@vger.kernel.org
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Ursula Braun <ubraun@linux.vnet.ibm.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Harish Patil <harish.patil@cavium.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Manish Chopra <manish.chopra@cavium.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-pm@vger.kernel.org
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Mark Gross <mark.gross@intel.com>
Cc: linux-watchdog@vger.kernel.org
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Kalle Valo <kvalo@qca.qualcomm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Michael Reed <mdr@sgi.com>
Cc: netdev@vger.kernel.org
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lkml.kernel.org/r/1507159627-127660-10-git-send-email-keescook@chromium.org
Drop the __init from pcibios_map_irq() to make this section mis-
match go away:
WARNING: vmlinux.o(.text+0x56acd4): Section mismatch in reference from the function pcibios_scanbus() to the function .init.text:pcibios_map_irq()
The function pcibios_scanbus() references
the function __init pcibios_map_irq().
This is often because pcibios_scanbus lacks a __init
annotation or the annotation of pcibios_map_irq is wrong.
Run-Tested only on Alchemy.
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17267/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The inline asm in __write_64bit_c0_split() modifies the 64-bit input
operand by shifting the high register left by 32, and constructing the
full 64-bit value in the low register (even on a 32-bit kernel), so if
that value is used again it could cause breakage as GCC would assume the
registers haven't changed when they have.
To quote the GCC extended asm documentation:
> Warning: Do not modify the contents of input-only operands (except for
> inputs tied to outputs). The compiler assumes that on exit from the
> asm statement these operands contain the same values as they had
> before executing the statement.
Avoid modifying the input by using a temporary variable as an output
which is modified instead of the input and not otherwise used. The asm
is always __volatile__ so GCC shouldn't optimise it out. The low
register of the temporary output is written before the high register of
the input is read, so we have two constraint alternatives, one where
both use the same registers (for when the input value isn't subsequently
used), and one with an early clobber on the output in case the low
output uses the same register as the high input. This allows the
resulting assembly to remain mostly unchanged.
A diff of a MIPS32r6 kernel reveals only three differences, two in
relation to write_c0_r10k_diag() in cpu_probe() (register allocation
rearranged slightly but otherwise identical), and one in relation to
write_c0_cvmmemctl2() in kvm_vz_local_flush_guesttlb_all(), but the
octeon CPU is only supported on 64-bit kernels where
__write_64bit_c0_split() isn't used so that shouldn't matter in
practice. So there currently doesn't appear to be anything broken by
this bug.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17315/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
msp71xx_defconfig can not be built at the in v4.14-rc1
arch/mips/pmcs-msp71xx/msp_smp.c:72:2: error: implicit declaration of function 'set_vi_handler' [-Werror=implicit-function-declaration]
I don't know what caused the regression, but including the right
header is the obvious fix.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17309/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Commit c311c79799 ("cpumask: make "nr_cpumask_bits" unsigned")
modified mipspmu_event_init() to cast the struct perf_event cpu field to
an unsigned integer before it is compared with nr_cpumask_bits (and
*ahem* did so without copying the linux-mips mailing list or any MIPS
developers...). This is broken because the cpu field may be -1 for
events which follow a process rather than being affine to a particular
CPU. When this is the case the cast to an unsigned int results in a
value equal to ULONG_MAX, which is always greater than nr_cpumask_bits
so we always fail mipspmu_event_init() and return -ENODEV.
The check against nr_cpumask_bits seems nonsensical anyway, so this
patch simply removes it. The cpu field is going to either be -1 or a
valid CPU number. Comparing it with nr_cpumask_bits is effectively
checking that it's a valid cpu number, but it seems safe to rely on the
core perf events code to ensure that's the case.
The end result is that this fixes use of perf on MIPS when not
constraining events to a particular CPU, and fixes the "perf list hw"
command which fails to list any events without this.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: c311c79799 ("cpumask: make "nr_cpumask_bits" unsigned")
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mips@linux-mips.org
Cc: stable <stable@vger.kernel.org> # v4.12+
Patchwork: https://patchwork.linux-mips.org/patch/17323/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
04c81c7293 ("MIPS: PCI: Replace pci_fixup_irqs() call with host bridge
IRQ mapping hooks") moved the PCI IRQ fixup to the new host bridge
map/swizzle_irq() hooks mechanism. Those hooks can also be called after
boot, when all the __init/__initdata/__initconst sections have been freed.
Therefore, functions called by them (and the data they refer to) must not
be marked as __init/__initdata/__initconst lest compilation trigger section
mismatch warnings.
Fix all the board files map_irq() hooks by simply removing the respective
__init/__initdata/__initconst section markers and by adding another
persistent hook IRQ map for the txx9 board files.
Fixes: 04c81c7293 ("MIPS: PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks")
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Steve French <smfrench@gmail.com>
Pull MIPS updates from Ralf Baechle:
"This is the main pull request for 4.14 for MIPS; below a summary of
the non-merge commits:
CM:
- Rename mips_cm_base to mips_gcr_base
- Specify register size when generating accessors
- Use BIT/GENMASK for register fields, order & drop shifts
- Add cluster & block args to mips_cm_lock_other()
CPC:
- Use common CPS accessor generation macros
- Use BIT/GENMASK for register fields, order & drop shifts
- Introduce register modify (set/clear/change) accessors
- Use change_*, set_* & clear_* where appropriate
- Add CM/CPC 3.5 register definitions
- Use GlobalNumber macros rather than magic numbers
- Have asm/mips-cps.h include CM & CPC headers
- Cluster support for topology functions
- Detect CPUs in secondary clusters
CPS:
- Read GIC_VL_IDENT directly, not via irqchip driver
DMA:
- Consolidate coherent and non-coherent dma_alloc code
- Don't use dma_cache_sync to implement fd_cacheflush
FPU emulation / FP assist code:
- Another series of 14 commits fixing corner cases such as NaN
propgagation and other special input values.
- Zero bits 32-63 of the result for a CLASS.D instruction.
- Enhanced statics via debugfs
- Do not use bools for arithmetic. GCC 7.1 moans about this.
- Correct user fault_addr type
Generic MIPS:
- Enhancement of stack backtraces
- Cleanup from non-existing options
- Handle non word sized instructions when examining frame
- Fix detection and decoding of ADDIUSP instruction
- Fix decoding of SWSP16 instruction
- Refactor handling of stack pointer in get_frame_info
- Remove unreachable code from force_fcr31_sig()
- Convert to using %pOF instead of full_name
- Remove the R6000 support.
- Move FP code from *_switch.S to *_fpu.S
- Remove unused ST_OFF from r2300_switch.S
- Allow platform to specify multiple its.S files
- Add #includes to various files to ensure code builds reliable and
without warning..
- Remove __invalidate_kernel_vmap_range
- Remove plat_timer_setup
- Declare various variables & functions static
- Abstract CPU core & VP(E) ID access through accessor functions
- Store core & VP IDs in GlobalNumber-style variable
- Unify checks for sibling CPUs
- Add CPU cluster number accessors
- Prevent direct use of generic_defconfig
- Make CONFIG_MIPS_MT_SMP default y
- Add __ioread64_copy
- Remove unnecessary inclusions of linux/irqchip/mips-gic.h
GIC:
- Introduce asm/mips-gic.h with accessor functions
- Use new GIC accessor functions in mips-gic-timer
- Remove counter access functions from irq-mips-gic.c
- Remove gic_read_local_vp_id() from irq-mips-gic.c
- Simplify shared interrupt pending/mask reads in irq-mips-gic.c
- Simplify gic_local_irq_domain_map() in irq-mips-gic.c
- Drop gic_(re)set_mask() functions in irq-mips-gic.c
- Remove gic_set_polarity(), gic_set_trigger(), gic_set_dual_edge(),
gic_map_to_pin() and gic_map_to_vpe() from irq-mips-gic.c.
- Convert remaining shared reg access, local int mask access and
remaining local reg access to new accessors
- Move GIC_LOCAL_INT_* to asm/mips-gic.h
- Remove GIC_CPU_INT* macros from irq-mips-gic.c
- Move various definitions to the driver
- Remove gic_get_usm_range()
- Remove __gic_irq_dispatch() forward declaration
- Remove gic_init()
- Use mips_gic_present() in place of gic_present and remove
gic_present
- Move gic_get_c0_*_int() to asm/mips-gic.h
- Remove linux/irqchip/mips-gic.h
- Inline __gic_init()
- Inline gic_basic_init()
- Make pcpu_masks a per-cpu variable
- Use pcpu_masks to avoid reading GIC_SH_MASK*
- Clean up mti, reserved-cpu-vectors handling
- Use cpumask_first_and() in gic_set_affinity()
- Let the core set struct irq_common_data affinity
microMIPS:
- Fix microMIPS stack unwinding on big endian systems
MIPS-GIC:
- SYNC after enabling GIC region
NUMA:
- Remove the unused parent_node() macro
R6:
- Constify r2_decoder_tables
- Add accessor & bit definitions for GlobalNumber
SMP:
- Constify smp ops
- Allow boot_secondary SMP op to return errors
VDSO:
- Drop gic_get_usm_range() usage
- Avoid use of linux/irqchip/mips-gic.h
Platform changes:
Alchemy:
- Add devboard machine type to cpuinfo
- update cpu feature overrides
- Threaded carddetect irqs for devboards
AR7:
- allow NULL clock for clk_get_rate
BCM63xx:
- Fix ENETDMA_6345_MAXBURST_REG offset
- Allow NULL clock for clk_get_rate
CI20:
- Enable GPIO and RTC drivers in defconfig
- Add ethernet and fixed-regulator nodes to DTS
Generic platform:
- Move Boston and NI 169445 FIT image source to their own files
- Include asm/bootinfo.h for plat_fdt_relocated()
- Include asm/time.h for get_c0_*_int()
- Include asm/bootinfo.h for plat_fdt_relocated()
- Include asm/time.h for get_c0_*_int()
- Allow filtering enabled boards by requirements
- Don't explicitly disable CONFIG_USB_SUPPORT
- Bump default NR_CPUS to 16
JZ4700:
- Probe the jz4740-rtc driver from devicetree
Lantiq:
- Drop check of boot select from the spi-falcon driver.
- Drop check of boot select from the lantiq-flash MTD driver.
- Access boot cause register in the watchdog driver through regmap
- Add device tree binding documentation for the watchdog driver
- Add docs for the RCU DT bindings.
- Convert the fpi bus driver to a platform_driver
- Remove ltq_reset_cause() and ltq_boot_select(
- Switch to a proper reset driver
- Switch to a new drivers/soc GPHY driver
- Add an USB PHY driver for the Lantiq SoCs using the RCU module
- Use of_platform_default_populate instead of __dt_register_buses
- Enable MFD_SYSCON to be able to use it for the RCU MFD
- Replace ltq_boot_select() with dummy implementation.
Loongson 2F:
- Allow NULL clock for clk_get_rate
Malta:
- Use new GIC accessor functions
NI 169445:
- Add support for NI 169445 board.
- Only include in 32r2el kernels
Octeon:
- Add support for watchdog of 78XX SOCs.
- Add support for watchdog of CN68XX SOCs.
- Expose support for mips32r1, mips32r2 and mips64r1
- Enable more drivers in config file
- Add support for accessing the boot vector.
- Remove old boot vector code from watchdog driver
- Define watchdog registers for 70xx, 73xx, 78xx, F75xx.
- Make CSR functions node aware.
- Allow access to CIU3 IRQ domains.
- Misc cleanups in the watchdog driver
Omega2+:
- New board, add support and defconfig
Pistachio:
- Enable Root FS on NFS in defconfig
Ralink:
- Add Mediatek MT7628A SoC
- Allow NULL clock for clk_get_rate
- Explicitly request exclusive reset control in the pci-mt7620 PCI driver.
SEAD3:
- Only include in 32 bit kernels by default
VoCore:
- Add VoCore as a vendor t0 dt-bindings
- Add defconfig file"
* '4.14-features' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (167 commits)
MIPS: Refactor handling of stack pointer in get_frame_info
MIPS: Stacktrace: Fix microMIPS stack unwinding on big endian systems
MIPS: microMIPS: Fix decoding of swsp16 instruction
MIPS: microMIPS: Fix decoding of addiusp instruction
MIPS: microMIPS: Fix detection of addiusp instruction
MIPS: Handle non word sized instructions when examining frame
MIPS: ralink: allow NULL clock for clk_get_rate
MIPS: Loongson 2F: allow NULL clock for clk_get_rate
MIPS: BCM63XX: allow NULL clock for clk_get_rate
MIPS: AR7: allow NULL clock for clk_get_rate
MIPS: BCM63XX: fix ENETDMA_6345_MAXBURST_REG offset
mips: Save all registers when saving the frame
MIPS: Add DWARF unwinding to assembly
MIPS: Make SAVE_SOME more standard
MIPS: Fix issues in backtraces
MIPS: jz4780: DTS: Probe the jz4740-rtc driver from devicetree
MIPS: Ci20: Enable RTC driver
watchdog: octeon-wdt: Add support for 78XX SOCs.
watchdog: octeon-wdt: Add support for cn68XX SOCs.
watchdog: octeon-wdt: File cleaning.
...
For example, the following could occur, making us miss a wakeup:
CPU0 CPU1
kvm_vcpu_block kvm_mips_comparecount_func
[L] swait_active(&vcpu->wq)
[S] prepare_to_swait(&vcpu->wq)
[L] if (!kvm_vcpu_has_pending_timer(vcpu))
schedule() [S] queue_timer_int(vcpu)
Ensure that the swait_active() check is not hoisted over the interrupt.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull more set_fs removal from Al Viro:
"Christoph's 'use kernel_read and friends rather than open-coding
set_fs()' series"
* 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: unexport vfs_readv and vfs_writev
fs: unexport vfs_read and vfs_write
fs: unexport __vfs_read/__vfs_write
lustre: switch to kernel_write
gadget/f_mass_storage: stop messing with the address limit
mconsole: switch to kernel_read
btrfs: switch write_buf to kernel_write
net/9p: switch p9_fd_read to kernel_write
mm/nommu: switch do_mmap_private to kernel_read
serial2002: switch serial2002_tty_write to kernel_{read/write}
fs: make the buf argument to __kernel_write a void pointer
fs: fix kernel_write prototype
fs: fix kernel_read prototype
fs: move kernel_read to fs/read_write.c
fs: move kernel_write to fs/read_write.c
autofs4: switch autofs4_write to __kernel_write
ashmem: switch to ->read_iter
Pull namespace updates from Eric Biederman:
"Life has been busy and I have not gotten half as much done this round
as I would have liked. I delayed it so that a minor conflict
resolution with the mips tree could spend a little time in linux-next
before I sent this pull request.
This includes two long delayed user namespace changes from Kirill
Tkhai. It also includes a very useful change from Serge Hallyn that
allows the security capability attribute to be used inside of user
namespaces. The practical effect of this is people can now untar
tarballs and install rpms in user namespaces. It had been suggested to
generalize this and encode some of the namespace information
information in the xattr name. Upon close inspection that makes the
things that should be hard easy and the things that should be easy
more expensive.
Then there is my bugfix/cleanup for signal injection that removes the
magic encoding of the siginfo union member from the kernel internal
si_code. The mips folks reported the case where I had used FPE_FIXME
me is impossible so I have remove FPE_FIXME from mips, while at the
same time including a return statement in that case to keep gcc from
complaining about unitialized variables.
I almost finished the work to get make copy_siginfo_to_user a trivial
copy to user. The code is available at:
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace.git neuter-copy_siginfo_to_user-v3
But I did not have time/energy to get the code posted and reviewed
before the merge window opened.
I was able to see that the security excuse for just copying fields
that we know are initialized doesn't work in practice there are buggy
initializations that don't initialize the proper fields in siginfo. So
we still sometimes copy unitialized data to userspace"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
Introduce v3 namespaced file capabilities
mips/signal: In force_fcr31_sig return in the impossible case
signal: Remove kernel interal si_code magic
fcntl: Don't use ambiguous SIG_POLL si_codes
prctl: Allow local CAP_SYS_ADMIN changing exe_file
security: Use user_namespace::level to avoid redundant iterations in cap_capable()
userns,pidns: Verify the userns for new pid namespaces
signal/testing: Don't look for __SI_FAULT in userspace
signal/mips: Document a conflict with SI_USER with SIGFPE
signal/sparc: Document a conflict with SI_USER with SIGFPE
signal/ia64: Document a conflict with SI_USER with SIGFPE
signal/alpha: Document a conflict with SI_USER for SIGTRAP
General updates:
* Constify pci_device_id in various drivers
* Constify device_type
* Remove pad control code from the Gemini driver
* Use %pOF to print OF node full_name
* Various fixes in the physmap_of driver
* Remove unused vars in mtdswap
* Check devm_kzalloc() return value in the spear_smi driver
* Check clk_prepare_enable() return code in the st_spi_fsm driver
* Create per MTD device debugfs enties
NAND updates, from Boris Brezillon:
* Fix memory leaks in the core
* Remove unused NAND locking support
* Rename nand.h into rawnand.h (preparing support for spi NANDs)
* Use NAND_MAX_ID_LEN where appropriate
* Fix support for 20nm Hynix chips
* Fix support for Samsung and Hynix SLC NANDs
* Various cleanup, improvements and fixes in the qcom driver
* Fixes for bugs detected by various static code analysis tools
* Fix mxc ooblayout definition
* Add a new part_parsers to tmio and sharpsl platform data in order to
define a custom list of partition parsers
* Request the reset line in exclusive mode in the sunxi driver
* Fix a build error in the orion-nand driver when compiled for ARMv4
* Allow 64-bit mvebu platforms to select the PXA3XX driver
SPI NOR updates, from Cyrille Pitchen and Marek Vasut:
* add support to the JEDEC JESD216B specification (SFDP tables).
* add support to the Intel Denverton SPI flash controller.
* fix error recovery for Spansion/Cypress SPI NOR memories.
* fix 4-byte address management for the Aspeed SPI controller.
* add support to some Microchip SST26 memory parts
* remove unneeded pinctrl header Write a message for tag:
-----BEGIN PGP SIGNATURE-----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=UgCd
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20170904' of git://git.infradead.org/linux-mtd
Pull MTD updates from Boris Brezillon:
"General updates:
- Constify pci_device_id in various drivers
- Constify device_type
- Remove pad control code from the Gemini driver
- Use %pOF to print OF node full_name
- Various fixes in the physmap_of driver
- Remove unused vars in mtdswap
- Check devm_kzalloc() return value in the spear_smi driver
- Check clk_prepare_enable() return code in the st_spi_fsm driver
- Create per MTD device debugfs enties
NAND updates, from Boris Brezillon:
- Fix memory leaks in the core
- Remove unused NAND locking support
- Rename nand.h into rawnand.h (preparing support for spi NANDs)
- Use NAND_MAX_ID_LEN where appropriate
- Fix support for 20nm Hynix chips
- Fix support for Samsung and Hynix SLC NANDs
- Various cleanup, improvements and fixes in the qcom driver
- Fixes for bugs detected by various static code analysis tools
- Fix mxc ooblayout definition
- Add a new part_parsers to tmio and sharpsl platform data in order
to define a custom list of partition parsers
- Request the reset line in exclusive mode in the sunxi driver
- Fix a build error in the orion-nand driver when compiled for ARMv4
- Allow 64-bit mvebu platforms to select the PXA3XX driver
SPI NOR updates, from Cyrille Pitchen and Marek Vasut:
- add support to the JEDEC JESD216B specification (SFDP tables).
- add support to the Intel Denverton SPI flash controller.
- fix error recovery for Spansion/Cypress SPI NOR memories.
- fix 4-byte address management for the Aspeed SPI controller.
- add support to some Microchip SST26 memory parts
- remove unneeded pinctrl header Write a message for tag:"
* tag 'for-linus-20170904' of git://git.infradead.org/linux-mtd: (74 commits)
mtd: nand: complain loudly when chip->bits_per_cell is not correctly initialized
mtd: nand: make Samsung SLC NAND usable again
mtd: nand: tmio: Register partitions using the parsers
mfd: tmio: Add partition parsers platform data
mtd: nand: sharpsl: Register partitions using the parsers
mtd: nand: sharpsl: Add partition parsers platform data
mtd: nand: qcom: Support for IPQ8074 QPIC NAND controller
mtd: nand: qcom: support for IPQ4019 QPIC NAND controller
dt-bindings: qcom_nandc: IPQ8074 QPIC NAND documentation
dt-bindings: qcom_nandc: IPQ4019 QPIC NAND documentation
dt-bindings: qcom_nandc: fix the ipq806x device tree example
mtd: nand: qcom: support for different DEV_CMD register offsets
mtd: nand: qcom: QPIC data descriptors handling
mtd: nand: qcom: enable BAM or ADM mode
mtd: nand: qcom: erased codeword detection configuration
mtd: nand: qcom: support for read location registers
mtd: nand: qcom: support for passing flags in DMA helper functions
mtd: nand: qcom: add BAM DMA descriptor handling
mtd: nand: qcom: allocate BAM transaction
mtd: nand: qcom: DMA mapping support for register read buffer
...
Merge more updates from Andrew Morton:
- most of the rest of MM
- a small number of misc things
- lib/ updates
- checkpatch
- autofs updates
- ipc/ updates
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (126 commits)
ipc: optimize semget/shmget/msgget for lots of keys
ipc/sem: play nicer with large nsops allocations
ipc/sem: drop sem_checkid helper
ipc: convert kern_ipc_perm.refcount from atomic_t to refcount_t
ipc: convert sem_undo_list.refcnt from atomic_t to refcount_t
ipc: convert ipc_namespace.count from atomic_t to refcount_t
kcov: support compat processes
sh: defconfig: cleanup from old Kconfig options
mn10300: defconfig: cleanup from old Kconfig options
m32r: defconfig: cleanup from old Kconfig options
drivers/pps: use surrounding "if PPS" to remove numerous dependency checks
drivers/pps: aesthetic tweaks to PPS-related content
cpumask: make cpumask_next() out-of-line
kmod: move #ifdef CONFIG_MODULES wrapper to Makefile
kmod: split off umh headers into its own file
MAINTAINERS: clarify kmod is just a kernel module loader
kmod: split out umh code into its own file
test_kmod: flip INT checks to be consistent
test_kmod: remove paranoid UINT_MAX check on uint range processing
vfat: deduplicate hex2bin()
...
Where possible, call memset16(), memmove() or memcpy() instead of using
open-coded loops. I don't like the calling convention that uses a byte
count instead of a count of u16s, but it's a little late to change that.
Reduces code size of fbcon.o by almost 400 bytes on my laptop build.
[akpm@linux-foundation.org: fix build]
Link: http://lkml.kernel.org/r/20170720184539.31609-9-willy@infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Miller <davem@davemloft.net>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=9cLP
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
- add enhanced Downstream Port Containment support, which prints more
details about Root Port Programmed I/O errors (Dongdong Liu)
- add Layerscape ls1088a and ls2088a support (Hou Zhiqiang)
- add MediaTek MT2712 and MT7622 support (Ryder Lee)
- add MediaTek MT2712 and MT7622 MSI support (Honghui Zhang)
- add Qualcom IPQ8074 support (Varadarajan Narayanan)
- add R-Car r8a7743/5 device tree support (Biju Das)
- add Rockchip per-lane PHY support for better power management (Shawn
Lin)
- fix IRQ mapping for hot-added devices by replacing the
pci_fixup_irqs() boot-time design with a host bridge hook called at
probe-time (Lorenzo Pieralisi, Matthew Minter)
- fix race when enabling two devices that results in upstream bridge
not being enabled correctly (Srinath Mannam)
- fix pciehp power fault infinite loop (Keith Busch)
- fix SHPC bridge MSI hotplug events by enabling bus mastering
(Aleksandr Bezzubikov)
- fix a VFIO issue by correcting PCIe capability sizes (Alex
Williamson)
- fix an INTD issue on Xilinx and possibly other drivers by unifying
INTx IRQ domain support (Paul Burton)
- avoid IOMMU stalls by marking AMD Stoney GPU ATS as broken (Joerg
Roedel)
- allow APM X-Gene device assignment to guests by adding an ACS quirk
(Feng Kan)
- fix driver crashes by disabling Extended Tags on Broadcom HT2100
(Extended Tags support is required for PCIe Receivers but not
Requesters, and we now enable them by default when Requesters support
them) (Sinan Kaya)
- fix MSIs for devices that use phantom RIDs for DMA by assuming MSIs
use the real Requester ID (not a phantom RID) (Robin Murphy)
- prevent assignment of Intel VMD children to guests (which may be
supported eventually, but isn't yet) by not associating an IOMMU with
them (Jon Derrick)
- fix Intel VMD suspend/resume by releasing IRQs on suspend (Scott
Bauer)
- fix a Function-Level Reset issue with Intel 750 NVMe by waiting
longer (up to 60sec instead of 1sec) for device to become ready
(Sinan Kaya)
- fix a Function-Level Reset issue on iProc Stingray by working around
hardware defects in the CRS implementation (Oza Pawandeep)
- fix an issue with Intel NVMe P3700 after an iProc reset by adding a
delay during shutdown (Oza Pawandeep)
- fix a Microsoft Hyper-V lockdep issue by polling instead of blocking
in compose_msi_msg() (Stephen Hemminger)
- fix a wireless LAN driver timeout by clearing DesignWare MSI
interrupt status after it is handled, not before (Faiz Abbas)
- fix DesignWare ATU enable checking (Jisheng Zhang)
- reduce Layerscape dependencies on the bootloader by doing more
initialization in the driver (Hou Zhiqiang)
- improve Intel VMD performance allowing allocation of more IRQ vectors
than present CPUs (Keith Busch)
- improve endpoint framework support for initial DMA mask, different
BAR sizes, configurable page sizes, MSI, test driver, etc (Kishon
Vijay Abraham I, Stan Drozd)
- rework CRS support to add periodic messages while we poll during
enumeration and after Function-Level Reset and prepare for possible
other uses of CRS (Sinan Kaya)
- clean up Root Port AER handling by removing unnecessary code and
moving error handler methods to struct pcie_port_service_driver
(Christoph Hellwig)
- clean up error handling paths in various drivers (Bjorn Andersson,
Fabio Estevam, Gustavo A. R. Silva, Harunobu Kurokawa, Jeffy Chen,
Lorenzo Pieralisi, Sergei Shtylyov)
- clean up SR-IOV resource handling by disabling VF decoding before
updating the corresponding resource structs (Gavin Shan)
- clean up DesignWare-based drivers by unifying quirks to update Class
Code and Interrupt Pin and related handling of write-protected
registers (Hou Zhiqiang)
- clean up by adding empty generic pcibios_align_resource() and
pcibios_fixup_bus() and removing empty arch-specific implementations
(Palmer Dabbelt)
- request exclusive reset control for several drivers to allow cleanup
elsewhere (Philipp Zabel)
- constify various structures (Arvind Yadav, Bhumika Goyal)
- convert from full_name() to %pOF (Rob Herring)
- remove unused variables from iProc, HiSi, Altera, Keystone (Shawn
Lin)
* tag 'pci-v4.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (170 commits)
PCI: xgene: Clean up whitespace
PCI: xgene: Define XGENE_PCI_EXP_CAP and use generic PCI_EXP_RTCTL offset
PCI: xgene: Fix platform_get_irq() error handling
PCI: xilinx-nwl: Fix platform_get_irq() error handling
PCI: rockchip: Fix platform_get_irq() error handling
PCI: altera: Fix platform_get_irq() error handling
PCI: spear13xx: Fix platform_get_irq() error handling
PCI: artpec6: Fix platform_get_irq() error handling
PCI: armada8k: Fix platform_get_irq() error handling
PCI: dra7xx: Fix platform_get_irq() error handling
PCI: exynos: Fix platform_get_irq() error handling
PCI: iproc: Clean up whitespace
PCI: iproc: Rename PCI_EXP_CAP to IPROC_PCI_EXP_CAP
PCI: iproc: Add 500ms delay during device shutdown
PCI: Fix typos and whitespace errors
PCI: Remove unused "res" variable from pci_resource_io()
PCI: Correct kernel-doc of pci_vpd_srdt_size(), pci_vpd_srdt_tag()
PCI/AER: Reformat AER register definitions
iommu/vt-d: Prevent VMD child devices from being remapping targets
x86/PCI: Use is_vmd() rather than relying on the domain number
...
Common:
- improve heuristic for boosting preempted spinlocks by ignoring VCPUs
in user mode
ARM:
- fix for decoding external abort types from guests
- added support for migrating the active priority of interrupts when
running a GICv2 guest on a GICv3 host
- minor cleanup
PPC:
- expose storage keys to userspace
- merge powerpc/topic/ppc-kvm branch that contains
find_linux_pte_or_hugepte and POWER9 thread management cleanup
- merge kvm-ppc-fixes with a fix that missed 4.13 because of vacations
- fixes
s390:
- merge of topic branch tlb-flushing from the s390 tree to get the
no-dat base features
- merge of kvm/master to avoid conflicts with additional sthyi fixes
- wire up the no-dat enhancements in KVM
- multiple epoch facility (z14 feature)
- Configuration z/Architecture Mode
- more sthyi fixes
- gdb server range checking fix
- small code cleanups
x86:
- emulate Hyper-V TSC frequency MSRs
- add nested INVPCID
- emulate EPTP switching VMFUNC
- support Virtual GIF
- support 5 level page tables
- speedup nested VM exits by packing byte operations
- speedup MMIO by using hardware provided physical address
- a lot of fixes and cleanups, especially nested
-----BEGIN PGP SIGNATURE-----
iQEcBAABCAAGBQJZspE1AAoJEED/6hsPKofoDcMIALT11n+LKV50QGwQdg2W1GOt
aChbgnj/Kegit3hQlDhVNb8kmdZEOZzSL81Lh0VPEr7zXU8QiWn2snbizDPv8sde
MpHhcZYZZ0YrpoiZKjl8yiwcu88OWGn2qtJ7OpuTS5hvEGAfxMncp0AMZho6fnz/
ySTwJ9GK2MTgBw39OAzCeDOeoYn4NKYMwjJGqBXRhNX8PG/1wmfqv0vPrd6wfg31
KJ58BumavwJjr8YbQ1xELm9rpQrAmaayIsG0R1dEUqCbt5a1+t2gt4h2uY7tWcIv
ACt2bIze7eF3xA+OpRs+eT+yemiH3t9btIVmhCfzUpnQ+V5Z55VMSwASLtTuJRQ=
=R8Ry
-----END PGP SIGNATURE-----
Merge tag 'kvm-4.14-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Radim Krčmář:
"First batch of KVM changes for 4.14
Common:
- improve heuristic for boosting preempted spinlocks by ignoring
VCPUs in user mode
ARM:
- fix for decoding external abort types from guests
- added support for migrating the active priority of interrupts when
running a GICv2 guest on a GICv3 host
- minor cleanup
PPC:
- expose storage keys to userspace
- merge kvm-ppc-fixes with a fix that missed 4.13 because of
vacations
- fixes
s390:
- merge of kvm/master to avoid conflicts with additional sthyi fixes
- wire up the no-dat enhancements in KVM
- multiple epoch facility (z14 feature)
- Configuration z/Architecture Mode
- more sthyi fixes
- gdb server range checking fix
- small code cleanups
x86:
- emulate Hyper-V TSC frequency MSRs
- add nested INVPCID
- emulate EPTP switching VMFUNC
- support Virtual GIF
- support 5 level page tables
- speedup nested VM exits by packing byte operations
- speedup MMIO by using hardware provided physical address
- a lot of fixes and cleanups, especially nested"
* tag 'kvm-4.14-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (67 commits)
KVM: arm/arm64: Support uaccess of GICC_APRn
KVM: arm/arm64: Extract GICv3 max APRn index calculation
KVM: arm/arm64: vITS: Drop its_ite->lpi field
KVM: arm/arm64: vgic: constify seq_operations and file_operations
KVM: arm/arm64: Fix guest external abort matching
KVM: PPC: Book3S HV: Fix memory leak in kvm_vm_ioctl_get_htab_fd
KVM: s390: vsie: cleanup mcck reinjection
KVM: s390: use WARN_ON_ONCE only for checking
KVM: s390: guestdbg: fix range check
KVM: PPC: Book3S HV: Report storage key support to userspace
KVM: PPC: Book3S HV: Fix case where HDEC is treated as 32-bit on POWER9
KVM: PPC: Book3S HV: Fix invalid use of register expression
KVM: PPC: Book3S HV: Fix H_REGISTER_VPA VPA size validation
KVM: PPC: Book3S HV: Fix setting of storage key in H_ENTER
KVM: PPC: e500mc: Fix a NULL dereference
KVM: PPC: e500: Fix some NULL dereferences on error
KVM: PPC: Book3S HV: Protect updates to spapr_tce_tables list
KVM: s390: we are always in czam mode
KVM: s390: expose no-DAT to guest and migration support
KVM: s390: sthyi: remove invalid guest write access
...
This fix was intended for 4.13, but didn't get in because both
maintainers were on vacation.
Paul Mackerras:
"It adds mutual exclusion between list_add_rcu and list_del_rcu calls
on the kvm->arch.spapr_tce_tables list. Without this, userspace could
potentially trigger corruption of the list and cause a host crash or
worse."
-----BEGIN PGP SIGNATURE-----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=fNM2
-----END PGP SIGNATURE-----
Merge tag 'media/v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
"Brazil's Independence Day pull request :-)
This is one of the biggest media pull requests, with 625 patches
affecting almost all parts of media (RC, DVB, V4L2, CEC, docs).
This contains:
- A lot of new drivers:
* DVB frontends: mxl5xx, stv0910, stv6111;
* camera flash: as3645a led driver;
* HDMI receiver: adv748X;
* camera sensor: Omnivision 6650 5M driver (ov6650);
* HDMI CEC: ao-cec meson driver;
* V4L2: Qualcom camss driver;
* Remote controller: gpio-ir-tx, pwm-ir-tx and zx-irdec drivers.
- The DDbridge DVB driver got a massive update, with makes it in sync
with modern hardware from that vendor;
- There's an important milestone on this series: the DVB
documentation was written in 2003, but only started to be updated
in 2007. It also used to contain several gaps from the time it was
kept out of tree, mentioning error codes and device nodes that
never existed upstream. On this series, it received a massive
update: all non-deprecated digital TV APIs are now in sync with the
current implementation;
- Some DVB APIs that aren't used by any upstream driver got removed;
- Other parts of the media documentation algo got updated, fixing
some bugs on its PDF output and making it compatible with Sphinx
version 1.6.
As the number of hacks required to build PDF output reduced, I hope
we'll have less troubles as newer versions of our documentation
toolchain are released (famous last words);
- As usual, lots of driver cleanups and improvements"
* tag 'media/v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (624 commits)
media: leds: as3645a: add V4L2_FLASH_LED_CLASS dependency
media: get rid of removed DMX_GET_CAPS and DMX_SET_SOURCE leftovers
media: Revert "[media] v4l: async: make v4l2 coexist with devicetree nodes in a dt overlay"
media: staging: atomisp: sh_css_calloc shall return a pointer to the allocated space
media: Revert "[media] lirc_dev: remove superfluous get/put_device() calls"
media: add qcom_camss.rst to v4l-drivers rst file
media: dvb headers: make checkpatch happier
media: dvb uapi: move frontend legacy API to another part of the book
media: pixfmt-srggb12p.rst: better format the table for PDF output
media: docs-rst: media: Don't use \small for V4L2_PIX_FMT_SRGGB10 documentation
media: index.rst: don't write "Contents:" on PDF output
media: pixfmt*.rst: replace a two dots by a comma
media: vidioc-g-fmt.rst: adjust table format
media: vivid.rst: add a blank line to correct ReST format
media: v4l2 uapi book: get rid of driver programming's chapter
media: format.rst: use the right markup for important notes
media: docs-rst: cardlists: change their format to flat-tables
media: em28xx-cardlist.rst: update to reflect last changes
media: v4l2-event.rst: adjust table to fit on PDF output
media: docs: don't show ToC for each part on PDF output
...
Merge updates from Andrew Morton:
- various misc bits
- DAX updates
- OCFS2
- most of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (119 commits)
mm,fork: introduce MADV_WIPEONFORK
x86,mpx: make mpx depend on x86-64 to free up VMA flag
mm: add /proc/pid/smaps_rollup
mm: hugetlb: clear target sub-page last when clearing huge page
mm: oom: let oom_reap_task and exit_mmap run concurrently
swap: choose swap device according to numa node
mm: replace TIF_MEMDIE checks by tsk_is_oom_victim
mm, oom: do not rely on TIF_MEMDIE for memory reserves access
z3fold: use per-cpu unbuddied lists
mm, swap: don't use VMA based swap readahead if HDD is used as swap
mm, swap: add sysfs interface for VMA based swap readahead
mm, swap: VMA based swap readahead
mm, swap: fix swap readahead marking
mm, swap: add swap readahead hit statistics
mm/vmalloc.c: don't reinvent the wheel but use existing llist API
mm/vmstat.c: fix wrong comment
selftests/memfd: add memfd_create hugetlbfs selftest
mm/shmem: add hugetlbfs support to memfd_create()
mm, devm_memremap_pages: use multi-order radix for ZONE_DEVICE lookups
mm/vmalloc.c: halve the number of comparisons performed in pcpu_get_vm_areas()
...
Introduce MADV_WIPEONFORK semantics, which result in a VMA being empty
in the child process after fork. This differs from MADV_DONTFORK in one
important way.
If a child process accesses memory that was MADV_WIPEONFORK, it will get
zeroes. The address ranges are still valid, they are just empty.
If a child process accesses memory that was MADV_DONTFORK, it will get a
segmentation fault, since those address ranges are no longer valid in
the child after fork.
Since MADV_DONTFORK also seems to be used to allow very large programs
to fork in systems with strict memory overcommit restrictions, changing
the semantics of MADV_DONTFORK might break existing programs.
MADV_WIPEONFORK only works on private, anonymous VMAs.
The use case is libraries that store or cache information, and want to
know that they need to regenerate it in the child process after fork.
Examples of this would be:
- systemd/pulseaudio API checks (fail after fork) (replacing a getpid
check, which is too slow without a PID cache)
- PKCS#11 API reinitialization check (mandated by specification)
- glibc's upcoming PRNG (reseed after fork)
- OpenSSL PRNG (reseed after fork)
The security benefits of a forking server having a re-inialized PRNG in
every child process are pretty obvious. However, due to libraries
having all kinds of internal state, and programs getting compiled with
many different versions of each library, it is unreasonable to expect
calling programs to re-initialize everything manually after fork.
A further complication is the proliferation of clone flags, programs
bypassing glibc's functions to call clone directly, and programs calling
unshare, causing the glibc pthread_atfork hook to not get called.
It would be better to have the kernel take care of this automatically.
The patch also adds MADV_KEEPONFORK, to undo the effects of a prior
MADV_WIPEONFORK.
This is similar to the OpenBSD minherit syscall with MAP_INHERIT_ZERO:
https://man.openbsd.org/minherit.2
[akpm@linux-foundation.org: numerically order arch/parisc/include/uapi/asm/mman.h #defines]
Link: http://lkml.kernel.org/r/20170811212829.29186-3-riel@redhat.com
Signed-off-by: Rik van Riel <riel@redhat.com>
Reported-by: Florian Weimer <fweimer@redhat.com>
Reported-by: Colm MacCártaigh <colm@allcosts.net>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Drewry <wad@chromium.org>
Cc: <linux-api@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A non-default huge page size can be encoded in the flags argument of the
mmap system call. The definitions for these encodings are in arch
specific header files. However, all architectures use the same values.
Consolidate all the definitions in the primary user header file
(uapi/linux/mman.h). Include definitions for all known huge page sizes.
Use the generic encoding definitions in hugetlb_encode.h as the basis
for these definitions.
Link: http://lkml.kernel.org/r/1501527386-10736-3-git-send-email-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull networking updates from David Miller:
1) Support ipv6 checksum offload in sunvnet driver, from Shannon
Nelson.
2) Move to RB-tree instead of custom AVL code in inetpeer, from Eric
Dumazet.
3) Allow generic XDP to work on virtual devices, from John Fastabend.
4) Add bpf device maps and XDP_REDIRECT, which can be used to build
arbitrary switching frameworks using XDP. From John Fastabend.
5) Remove UFO offloads from the tree, gave us little other than bugs.
6) Remove the IPSEC flow cache, from Florian Westphal.
7) Support ipv6 route offload in mlxsw driver.
8) Support VF representors in bnxt_en, from Sathya Perla.
9) Add support for forward error correction modes to ethtool, from
Vidya Sagar Ravipati.
10) Add time filter for packet scheduler action dumping, from Jamal Hadi
Salim.
11) Extend the zerocopy sendmsg() used by virtio and tap to regular
sockets via MSG_ZEROCOPY. From Willem de Bruijn.
12) Significantly rework value tracking in the BPF verifier, from Edward
Cree.
13) Add new jump instructions to eBPF, from Daniel Borkmann.
14) Rework rtnetlink plumbing so that operations can be run without
taking the RTNL semaphore. From Florian Westphal.
15) Support XDP in tap driver, from Jason Wang.
16) Add 32-bit eBPF JIT for ARM, from Shubham Bansal.
17) Add Huawei hinic ethernet driver.
18) Allow to report MD5 keys in TCP inet_diag dumps, from Ivan
Delalande.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1780 commits)
i40e: point wb_desc at the nvm_wb_desc during i40e_read_nvm_aq
i40e: avoid NVM acquire deadlock during NVM update
drivers: net: xgene: Remove return statement from void function
drivers: net: xgene: Configure tx/rx delay for ACPI
drivers: net: xgene: Read tx/rx delay for ACPI
rocker: fix kcalloc parameter order
rds: Fix non-atomic operation on shared flag variable
net: sched: don't use GFP_KERNEL under spin lock
vhost_net: correctly check tx avail during rx busy polling
net: mdio-mux: add mdio_mux parameter to mdio_mux_init()
rxrpc: Make service connection lookup always check for retry
net: stmmac: Delete dead code for MDIO registration
gianfar: Fix Tx flow control deactivation
cxgb4: Ignore MPS_TX_INT_CAUSE[Bubble] for T6
cxgb4: Fix pause frame count in t4_get_port_stats
cxgb4: fix memory leak
tun: rename generic_xdp to skb_xdp
tun: reserve extra headroom only when XDP is set
net: dsa: bcm_sf2: Configure IMP port TC2QOS mapping
net: dsa: bcm_sf2: Advertise number of egress queues
...
Commit 34c2f668d0 ("MIPS: microMIPS: Add unaligned access support.")
added handling of microMIPS instructions to manipulate the stack
pointer. The code that was added violates code style rules with long
lines caused by lots of nested conditionals.
The added code interprets (inline) any known stack pointer manipulation
instruction to find the stack frame size. Handling the microMIPS cases
added quite a bit of complication to this function.
Refactor is_sp_move_ins to perform the interpretation of the immediate
as the instruction manipulating the stack pointer is found. This reduces
the amount of indentation required in get_frame_info, and more closely
matches the operation of is_ra_save_ins.
Suggested-by: Maciej W. Rozycki <macro@imgtec.com>
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16958/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The stack unwinding code uses the mips_instuction union to decode the
instructions it finds. That union uses the __BITFIELD_FIELD macro to
reorder depending on endianness. The stack unwinding code always places
16bit instructions in halfword 1 of the union. This makes the union
accesses correct for little endian systems. Similarly, 32bit
instructions are reordered such that they are correct for little endian
systems. This handling leaves unwinding the stack on big endian systems
broken, as the mips_instruction union will then look for the fields in
the wrong halfword.
To fix this, use a logical shift to place the 16bit instruction into the
correct position in the word field of the union. Use the same shifting
to order the 2 halfwords of 32bit instuctions. Then replace accesses to
the halfword with accesses to the shifted word.
In the case of the ADDIUS5 instruction, switch to using the
mm16_r5_format union member to avoid the need for a 16bit shift.
Fixes: 34c2f668d0 ("MIPS: microMIPS: Add unaligned access support.")
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16956/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
When the immediate encoded in the instruction is accessed, it is sign
extended due to being a signed value being assigned to a signed integer.
The ISA specifies that this operation is an unsigned operation.
The sign extension leads us to incorrectly decode:
801e9c8e: cbf1 sw ra,68(sp)
As having an immediate of 1073741809.
Since the instruction format does not specify signed/unsigned, and this
is currently the only location to use this instuction format, change it
to an unsigned immediate.
Fixes: bb9bc4689b ("MIPS: Calculate microMIPS ra properly when unwinding the stack")
Suggested-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Cc: Miodrag Dinic <miodrag.dinic@imgtec.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16957/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Commit 34c2f668d0 ("MIPS: microMIPS: Add unaligned access support.")
added handling of microMIPS instructions to manipulate the stack
pointer. Unfortunately the decoding of the addiusp instruction was
incorrect, and performed a left shift by 2 bits to the raw immediate,
rather than decoding the immediate and then performing the shift, as
documented in the ISA.
This led to incomplete stack traces, due to incorrect frame sizes being
calculated. For example the instruction:
801faee0 <do_sys_poll>:
801faee0: 4e25 addiu sp,sp,-952
As decoded by objdump, would be interpreted by the existing code as
having manipulated the stack pointer by +1096.
Fix this by changing the order of decoding the immediate and applying
the left shift. Also change to accessing the instuction through the
union to avoid the endianness problem of accesing halfword[0], which
will fail on big endian systems.
Cope with the special behaviour of immediates 0x0, 0x1, 0x1fe and 0x1ff
by XORing with 0x100 again if mod(immediate) < 4. This logic was tested
with the following test code:
int main(int argc, char **argv)
{
unsigned int enc;
int imm;
for (enc = 0; enc < 512; ++enc) {
int tmp = enc << 2;
imm = -(signed short)(tmp | ((tmp & 0x100) ? 0xfe00 : 0));
unsigned short tmp = enc;
tmp = (tmp ^ 0x100) - 0x100;
if ((unsigned short)(tmp + 2) < 4)
tmp ^= 0x100;
imm = -(signed short)(tmp << 2);
printf("%#x\t%d\t->\t(%#x\t%d)\t%#x\t%d\n",
enc, enc,
(short)tmp, (short)tmp,
imm, imm);
}
return EXIT_SUCCESS;
}
Which generates the table:
input encoding -> tmp (matching manual) frame size
-----------------------------------------------------------------------
0 0 -> (0x100 256) 0xfffffc00 -1024
0x1 1 -> (0x101 257) 0xfffffbfc -1028
0x2 2 -> (0x2 2) 0xfffffff8 -8
0x3 3 -> (0x3 3) 0xfffffff4 -12
...
0xfe 254 -> (0xfe 254) 0xfffffc08 -1016
0xff 255 -> (0xff 255) 0xfffffc04 -1020
0x100 256 -> (0xffffff00 -256) 0x400 1024
0x101 257 -> (0xffffff01 -255) 0x3fc 1020
...
0x1fc 508 -> (0xfffffffc -4) 0x10 16
0x1fd 509 -> (0xfffffffd -3) 0xc 12
0x1fe 510 -> (0xfffffefe -258) 0x408 1032
0x1ff 511 -> (0xfffffeff -257) 0x404 1028
Thanks to James Hogan for the test code & verifying the logic.
Fixes: 34c2f668d0 ("MIPS: microMIPS: Add unaligned access support.")
Suggested-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16955/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The addiusp instruction uses the pool16d opcode, with bit 0 of the
immediate set. The test for the addiusp opcode erroneously did a logical
and of the immediate with mm_addiusp_func, which has value 1, so this
test always passes when the immediate is non-zero.
Fix the test by replacing the logical and with a bitwise and.
Fixes: 34c2f668d0 ("MIPS: microMIPS: Add unaligned access support.")
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16954/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Commit 34c2f668d0 ("MIPS: microMIPS: Add unaligned access support.")
added fairly broken support for handling 16bit microMIPS instructions in
get_frame_info(). It adjusts the instruction pointer by 16bits in the
case of a 16bit sp move instruction, but not any other 16bit
instruction.
Commit b6c7a324df ("MIPS: Fix get_frame_info() handling of microMIPS
function size") goes some way to fixing get_frame_info() to iterate over
microMIPS instuctions, but the instruction pointer is still manipulated
using a postincrement, and is of union mips_instruction type. Since the
union is sized to the largest member (a word), but microMIPS
instructions are a mix of halfword and word sizes, the function does not
always iterate correctly, ending up misaligned with the instruction
stream and interpreting it incorrectly.
Since the instruction modifying the stack pointer is usually the first
in the function, that one is usually handled correctly. But the
instruction which saves the return address to the sp is some variable
number of instructions into the frame and is frequently missed due to
not being on a word boundary, leading to incomplete walking of the
stack.
Fix this by incrementing the instruction pointer based on the size of
the previously decoded instruction (& remove the hack introduced by
commit 34c2f668d0 ("MIPS: microMIPS: Add unaligned access support.")
which adjusts the instruction pointer in the case of a 16bit sp move
instruction, but not any other).
Fixes: 34c2f668d0 ("MIPS: microMIPS: Add unaligned access support.")
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16953/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Make the behaviour of clk_get_rate consistent with common clk's
clk_get_rate by accepting NULL clocks as parameter. Some device
drivers rely on this, and will cause an OOPS otherwise.
Fixes: 3f0a06b036 ("MIPS: ralink: adds clkdev code")
Reported-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16778/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Make the behaviour of clk_get_rate consistent with common clk's
clk_get_rate by accepting NULL clocks as parameter, as some device
drivers rely on this.
Make the behaviour of clk_get_rate consistent with common clk's
clk_get_rate by accepting NULL clocks as parameter. Some device
drivers rely on this, and will cause an OOPS otherwise.
Fixes: f8ede0f700 ("MIPS: Loongson 2F: Add CPU frequency scaling support")
Reported-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16777/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Make the behaviour of clk_get_rate consistent with common clk's
clk_get_rate by accepting NULL clocks as parameter. Some device
drivers rely on this, and will cause an OOPS otherwise.
Fixes: e7300d04bd ("MIPS: BCM63xx: Add support for the Broadcom BCM63xx family of SOCs.")
Reported-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16776/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Make the behaviour of clk_get_rate consistent with common clk's
clk_get_rate by accepting NULL clocks as parameter. Some device
drivers rely on this, and will cause an OOPS otherwise.
Fixes: 780019ddf0 ("MIPS: AR7: Implement clock API")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reported-by: Mathias Kresin <dev@kresin.me>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16775/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The channels are only 0x40 bytes large, so 0x40 would be the next one's
CHANCFG_REG. Also the position makes it clear that this was intended to
be 0x04. So clearly a typo.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: bcm-kernel-feedback-list@broadcom.com
Patchwork: https://patchwork.linux-mips.org/patch/15316/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The MIPS frame save code was just saving a few registers, enough to
do a backtrace if every function set up a frame. However, this is
not working if you are using DWARF unwinding, because most of the
registers are wrong. This was causing kdump backtraces to be short
or bogus.
So save all the registers.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16989/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Modify the SAVE_SOME macro to look more like a standard
function, doing the arithmetic for the frame on the SP
register instead of copying it from K1, and by saving
the stored EPC from the RA. This lets the get_frame_info()
function process this function like any other. It also
remove an instruction or two from the kernel entry,
making it more efficient.
unwind_stack_by_address() has special handling for
the top of the interrupt stack, but without this change
unwinding will still fail if you get an interrupt while
handling an interrupt and try to do a traceback from
the second interrupt.
This change modifies the get_saved_sp macro to
optionally store the fetched value right into sp and store the
old SP value into K0. Then it's just a matter of subtracting
the frame from SP and storing the old SP from K0.
This required changing the DADDI workaround a bit, since K0
holds the SP, we had to use K1 for AT. But it eliminated
some of the special handling for the DADDI workaround.
Saving the RA register was moved up to before fetching the
CP0_EPC register, so the CP0_EPC register could be stored
into RA and the saved. This lets the traceback code know
where RA is actually stored.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16991/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
I saw two problems when doing backtraces:
The compiler was putting a "fast return" at the top of some
functions, before it set up the frame. The backtrace code
would stop when it saw a jump instruction, so it would never
get to the stack frame setup and would thus misinterpret it.
To fix this, don't look for jump instructions until the
frame setup has been seen.
The assembly code here is:
ffffffff80b885a0 <serial8250_handle_irq>:
ffffffff80b885a0: c8a00003 bbit0 a1,0x0,ffffffff80b885b0 <serial8250_handle_irq+0x10>
ffffffff80b885a4: 0000102d move v0,zero
ffffffff80b885a8: 03e00008 jr ra
ffffffff80b885ac: 00000000 nop
ffffffff80b885b0: 67bdffd0 daddiu sp,sp,-48
ffffffff80b885b4: ffb00008 sd s0,8(sp)
The second problem was the compiler was putting the last
instruction of the frame save in the delay slot of the
jump instruction. If it saved the RA in there, the
backtrace could would miss it and misinterpret the frame.
To fix this, make sure to process the instruction after
the first jump seen.
The assembly code for this is:
ffffffff80806fd0 <plat_irq_dispatch>:
ffffffff80806fd0: 67bdffd0 daddiu sp,sp,-48
ffffffff80806fd4: ffb30020 sd s3,32(sp)
ffffffff80806fd8: 24130018 li s3,24
ffffffff80806fdc: ffb20018 sd s2,24(sp)
ffffffff80806fe0: 3c12811c lui s2,0x811c
ffffffff80806fe4: ffb10010 sd s1,16(sp)
ffffffff80806fe8: 3c11811c lui s1,0x811c
ffffffff80806fec: ffb00008 sd s0,8(sp)
ffffffff80806ff0: 3c10811c lui s0,0x811c
ffffffff80806ff4: 08201c03 j ffffffff8080700c <plat_irq_dispa
tch+0x3c>
ffffffff80806ff8: ffbf0028 sd ra,40(sp)
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16992/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Use proper ssize_t and size_t types for the return value and count
argument, move the offset last and make it an in/out argument like
all other read/write helpers, and make the buf argument a void pointer
to get rid of lots of casts in the callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Compared to the old xrx200_phy_fw driver the new version has multiple
enhancements. The name of the firmware files does not have to be added
to all .dts files anymore - one now configures the GPHY mode (FE or GE)
instead. Each GPHY can now also boot separate firmware (thus mixing of
GE and FE GPHYs is now possible).
The new implementation is based on the RCU syscon-mfd and uses the
reeset_controller framework instead of raw RCU register reads/writes.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Cc: john@phrozen.org
Cc: p.zabel@pengutronix.de
Cc: kishon@ti.com
Cc: mark.rutland@arm.com
Cc: linux-mips@linux-mips.org
Cc: linux-mtd@lists.infradead.org
Cc: linux-watchdog@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-spi@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17128/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
linux/irqchip/mips-gic.h is included in a few files that don't actually
use it at all. Remove these unnecessary inclusions in preparation for
removing the header.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17048/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Our VDSO code makes use of macros from linux/irqchip/mips-gic.h to
provide offsets to register values, but these are trivial offsets to the
two 32 bit halves of a 64 bit value. Replace use of the macros with zero
(ie. omit adding an offset) and the size of the low 32 bit of the value.
This removes our need for linux/irqchip/mips-gic.h & prepares us for it
to be removed.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17047/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The linux/irqchip/mips-gic.h header is now almost empty. Move the
declarations of gic_get_c0_compare_int(), gic_get_c0_perfcount_int() &
gic_get_c0_fdc_int() to asm/mips-gic.h in order to close in on being
able to delete the former header.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17046/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
In preparation for removing the gic_present global variable, switch to
using the mips_gic_present() function instead. For the most part this is
a straightforward substitution. In cases which previously wrapped the
GIC case in an #ifdef CONFIG_MIPS_GIC that #ifdef has been removed,
since mips_gic_present() will return a compile-time constant false
allowing the affected code to be optimised out anyway.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17044/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
We don't really need gic_get_usm_range() to abstract discovery of the
address of the GIC user-visible section now that we have access to its
base address globally.
Switch to calculating it ourselves, which will allow us to stop
requiring the irqchip driver to care about a counter exposed to userland
for use via the VDSO.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17040/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Move the definitions of macros used to convert between hardware IRQ
numbers & shared or local interrupt numbers into the irqchip driver,
which is all that should ever need to care about them.
Remove GIC_CPU_TO_VEC_OFFSET() in the process since it's never used.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17039/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Move the definition of VP-local interrupts provided by the MIPS Global
Interrupt Controller to the new asm/mips-gic.h header to be alongside
the new accessor functions. Whilst at it, convert to an enum which lends
itself more easily to expansion & documentation.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17037/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
We currently have __ioread32_copy, __iowrite32_copy & __iowrite64_copy
helpers in lib/iomap_copy.c. This patch adds __ioread64_copy to round
out the set, allowing copies from I/O memory using 32 or 64 bit reads.
[ralf@linux-mips.org: Changed to move all the code of this patch to be
applied to arch/mips temporarily.]
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17025/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Rather than calling the gic_read_local_vp_id() function from the GIC
irqchip driver, call read_gic_vl_ident() to read the GIC_VL_IDENT
register directly. This will allow us to remove gic_read_local_vp_id()
from the irqchip driver in a further patch, since that driver doesn't
actually care about the register's value.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17023/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Pull MIPS fixes from Ralf Baechle:
"The two indirect syscall fixes have sat in linux-next for a few days.
I did check back with a hardware designer to ensure a SYNC is really
what's required for the GIC fix and so the GIC fix didn't make it into
to linux-next in time for this final pull request.
It builds in local build tests and passes Imagination's test system"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
irqchip: mips-gic: SYNC after enabling GIC region
MIPS: Remove pt_regs adjustments in indirect syscall handler
MIPS: seccomp: Fix indirect syscall args
Use the accessor functions provided by asm/mips-gic.h rather than
calling functions provided by the GIC irqchip driver, in preparation for
those non-IRQ-related functions being removed from the irqchip driver.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* Fix memory leaks in the core
* Remove unused NAND locking support
* Rename nand.h into rawnand.h (preparing support for spi NANDs)
* Use NAND_MAX_ID_LEN where appropriate
* Fix support for 20nm Hynix chips
* Fix support for Samsung and Hynix SLC NANDs
and the following driver changes:
* Various cleanup, improvements and fixes in the qcom driver
* Fixes for bugs detected by various static code analysis tools
* Fix mxc ooblayout definition
* Add a new part_parsers to tmio and sharpsl platform data in order to
define a custom list of partition parsers
* Request the reset line in exclusive mode in the sunxi driver
* Fix a build error in the orion-nand driver when compiled for ARMv4
* Allow 64-bit mvebu platforms to select the PXA3XX driver
-----BEGIN PGP SIGNATURE-----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=bC1+
-----END PGP SIGNATURE-----
Merge tag 'nand/for-4.14' of git://git.infradead.org/l2-mtd into mtd/next
From Boris:
"
This pull request contains the following core changes:
* Fix memory leaks in the core
* Remove unused NAND locking support
* Rename nand.h into rawnand.h (preparing support for spi NANDs)
* Use NAND_MAX_ID_LEN where appropriate
* Fix support for 20nm Hynix chips
* Fix support for Samsung and Hynix SLC NANDs
and the following driver changes:
* Various cleanup, improvements and fixes in the qcom driver
* Fixes for bugs detected by various static code analysis tools
* Fix mxc ooblayout definition
* Add a new part_parsers to tmio and sharpsl platform data in order to
define a custom list of partition parsers
* Request the reset line in exclusive mode in the sunxi driver
* Fix a build error in the orion-nand driver when compiled for ARMv4
* Allow 64-bit mvebu platforms to select the PXA3XX driver
"
Calls to mmu_notifier_invalidate_page() were replaced by calls to
mmu_notifier_invalidate_range() and are now bracketed by calls to
mmu_notifier_invalidate_range_start()/end()
Remove now useless invalidate_page callback.
Changed since v1 (Linus Torvalds)
- remove now useless kvm_arch_mmu_notifier_invalidate_page()
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Tested-by: Mike Galbraith <efault@gmx.de>
Tested-by: Adam Borowski <kilobyte@angband.pl>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: kvm@vger.kernel.org
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch introduces a new header providing accessor functions for the
MIPS Global Interrupt Controller (GIC) mirroring those provided for the
other 2 components of the MIPS Coherent Processing System (CPS) - the
Coherence Manager (CM) & Cluster Power Controller (CPC).
This header makes use of the new standardised CPS accessor macros where
possible, but does require some custom accessors for cases where we have
either a bit or a register per interrupt.
A major advantage of this over the existing
include/linux/irqchip/mips-gic.h definitions is that code performing
accesses can become much simpler, for example this:
gic_update_bits(GIC_REG(SHARED, GIC_SH_SET_TRIGGER) +
GIC_INTR_OFS(intr), 1ul << GIC_INTR_BIT(intr),
(unsigned long)trig << GIC_INTR_BIT(intr));
...can become simply:
change_gic_trig(intr, trig);
The accessors handle 32 vs 64 bit in the same way as for CM & CPC code,
which means that GIC code will also not need to worry about the access
size in most cases. They are also accessible outside of
drivers/irqchip/irq-mips-gic.c which will allow for simplification in
the use of the non-interrupt portions of the GIC (eg. counters) which
currently require the interrupt controller driver to expose helper
functions for access.
This patch doesn't change any existing code over to use the new
accessors yet, since a wholesale change would be invasive & difficult to
review. Instead follow-on patches will convert code piecemeal to use
this new header. The one change to existing code is to rename gic_base
to mips_gic_base & make it global, in order to fit in with the naming
expected by the standardised CPS accessor macros.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17020/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
In generic_defconfig set CONFIG_NR_CPUS to 16 rather than 2, which is a
rather too low limit for many modern day MIPS systems.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16949/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Leave CONFIG_USB_SUPPORT at its default, allowing board config fragments
to make use of USB drivers without needing to override it & trigger
warnings from merge_config.sh.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16948/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
On systems that support MT ASE multithreading (ie. VPEs) we are very
likely to want to include that support as default. Rather than setting
it in various defconfigs, simply make CONFIG_MIPS_MT_SMP default y such
that systems which select CONFIG_SYS_SUPPORTS_MULTITHREADING get it by
default.
As well as allowing us to remove the selection of CONFIG_MIPS_MT_SMP
from various defconfigs, this also allows the generated generic
defconfigs which derive from generic_defconfig to automatically gain
support for MT ASE SMP when building for a suitable (pre-MIPSr6) ISA.
For malta_kvm_guest_defconfig CONFIG_MIPS_MT_SMP is explicitly disabled
since enabling SMP implicitly disables CONFIG_KVM_GUEST, which depends
on CONFIG_BROKEN_ON_SMP.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16947/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Using generic_defconfig directly is unlikely to be what a user actually
wants to do - it doesn't specify any particular ISA revision & it
doesn't enable any board or driver support, resulting in a largely
useless kernel.
Prevent users from using it directly, printing a helpful message to
point them in the right direction if they attempt to.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16946/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The NI 169445 board uses a little endian MIPS32r2 CPU, and therefore
including board support in kernels that are unable to run on such a CPU
is pointless.
Specify requirements in the board config fragment that cause the NI
169445 board support to only be included in generic kernels that target
little endian MIPS32r2 CPUs.
For example, NI 169445 support will be included when configuring using
32r2el_defconfig but not when using 64r6_defconfig.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Acked-by: Nathan Sullivan <nathan.sullivan@ni.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16945/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The MIPS SEAD-3 development board has only ever been used with 32 bit
CPUs, so including support for it in 64 bit kernels is wasteful since
those kernels will never run on a SEAD-3.
Specify a requirement in the SEAD-3 board config fragment that ensures
the board support is only included in 32 bit kernels, by checking that
CONFIG_32BIT=y.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16944/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Up until now when configuring a generic kernel all board config
fragments have been merged by default unless boards are explicitly
selected by the user specifying BOARDS=.
In many cases this is sub-optimal, since some boards don't make sense to
include in some kernels. For example the MIPS SEAD-3 development board
has only ever been used with 32 bit CPUs, so including support for the
SEAD-3 in a 64 bit kernel is wasteful.
This patch introduces support for specifying requirements in board
config fragments, using comments formatted like so:
# require CONFIG_BLA=y
For example the SEAD-3 board could specify that it should only be merged
for 32 bit kernels using a requirement line like the following:
# require CONFIG_32BIT=y
A new generic-board-config.sh script is introduced to handle selecting
the board config fragments to merge & calling merge_config.sh to merge
them. In order to allow requirements to check Kconfig symbols that are
implicitly selected, rather than explicitly specified by
generic_defconfig or one of the ISA config fragments, an intermediate
.config file is saved & used as a reference when checking requirements.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16943/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
As a first step towards supporting multi-cluster systems, detect cores &
VPs in secondary clusters & record their cluster information in the
cpu_data array. The "VP topology" line printed during boot is extended
to display multiple clusters. On a single cluster it shows output like
the following:
VP topology: {4,4}
This would indicate a system with 2 cores which each contain 4 VPs. We
extend this to cover multiple clusters in a natural way:
VP topology: {4,4},{2,2}
This would indicate a system with 2 clusters. The first cluster contains
2 cores which each contain 4 VPs. The second cluster contains 2 cores
which each contain 2 VPs.
Actually booting these cores & VPs is left to further patches once other
pieces are in place.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17017/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Modify the functions we use to read information about the topology of
the system (the number of cores, VPs & IOCUs that it contains) in order
to take into account multiple clusters, and provide a new function to
determine the number of clusters in the system.
Users of these functions are modified only such that they continue to
build successfully - having them actually handle multiple clusters is
left to further patches.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17016/
Patchwork: https://patchwork.linux-mips.org/patch/17218/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
With Coherence Manager (CM) 3.5 information about the topology of the
system, which has previously only been available through & accessed from
the CM, is now also provided by the Cluster Power Controller (CPC). This
includes a new CPC_CONFIG register mirroring GCR_CONFIG, and similarly a
new CPC_Cx_CONFIG register mirroring GCR_Cx_CONFIG.
In preparation for adjusting functions such as mips_cm_numcores(), which
have previously only needed to access the CM, to also access the CPC
this patch modifies the way we use the various CPS headers. Rather than
having users include asm/mips-cm.h or asm/mips-cpc.h individually we
instead have users include asm/mips-cps.h which in turn includes
asm/mips-cm.h & asm/mips-cpc.h. This means that users will gain access
to both CM & CPC registers by including one header, and most importantly
it makes asm/mips-cps.h an ideal location for helper functions which
need to access the various components of the CPS.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17015/
Patchwork: https://patchwork.linux-mips.org/patch/17217/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Allow the boot_secondary SMP op to return an error to __cpu_up(), which
will in turn return it to its caller.
This will allow SMP implementations to return errors quickly in cases
they they know have failed, rather than relying upon __cpu_up()
eventually timing out waiting for the cpu_running completion.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17014/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
With CM >= 3.5 we have the notion of multiple clusters & can access
their CM, CPC & GIC registers via the apporpriate redirect/other
register blocks. In order to allow for this introduce cluster & block
arguments to mips_cm_lock_other() which configures the redirect/other
region to point at the appropriate cluster, core, VP & register block.
Since we now have 4 arguments to mips_cm_lock_other() & a common use is
likely to be to target the cluster, core & VP corresponding to a
particular Linux CPU number we also add a new mips_cm_lock_other_cpu()
helper function which handles that without the caller needing to
manually pull out the cluster, core & VP numbers.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17013/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Introduce cpu_cluster() & cpu_set_cluster() accessor functions in the
same vein as cpu_core(), cpu_vpe_id() & their set variants. These will
be used in further patches to allow users to get or set a CPUs cluster
number.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17012/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Up until now we have open-coded checks for whether CPUs are siblings,
with slight variations on whether we consider the package ID or not.
This will only get more complex when we introduce cluster support, so in
preparation for that this patch introduces a cpus_are_siblings()
function which can be used to check whether or not 2 CPUs are siblings
in a consistent manner.
By checking globalnumber with the VP ID masked out this also has the
neat side effect of being ready for multi-cluster systems already.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17011/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This patch modifies the way we store core & VP IDs such that we store
them in a single 32 bit integer whose format matches that of the MIPSr6
GlobalNumber register. Whereas we have previously stored core & VP IDs
in separate fields, storing them in a single GlobalNumber-like field:
1) Reduces the size of struct cpuinfo_mips by 4 bytes, and will allow
it to not grow when cluster support is added.
2) Gives us a natural place to store cluster number, which matches up
with what the architecture provides.
3) Will be useful in the future as a parameter to the MIPSr6 GINVI
instruction to specify a target CPU whose icache that instruction
should operate on.
The cpu_set*() accessor functions are moved out of the asm/cpu-info.h
header in order to allow them to use the WARN_ON macro, which is
unusable in asm/cpu-info.h due to include ordering.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17010/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
We currently have fields in struct cpuinfo_mips for the core & VP(E) ID
of a particular CPU, and various pieces of code directly access those
fields. This patch abstracts such access by introducing accessor
functions cpu_core(), cpu_set_core(), cpu_vpe_id() & cpu_set_vpe_id()
and having code that needs to access these values call those functions
rather than directly accessing the struct cpuinfo_mips fields. This
prepares us for changes to the way in which those values are stored in
later patches.
The cpu_vpe_id() function is introduced even though we already had a
cpu_vpe_id() macro for a couple of reasons:
1) It's more consistent with the core, and future cluster, accessors.
2) It ensures a sensible return type without explicit casts.
3) It's generally preferable to use functions rather than macros.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17009/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
We now have definitions for the GlobalNumber register in asm/mipsregs.h,
so use them in place of magic numbers in cps-vec.S.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17008/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
MIPSr6 introduces a GlobalNumber register, which is required when VPs
are implemented (ie. when multi-threading is supported) but otherwise
optional. The register contains sufficient information to uniquely
identify a VP within a system using its cluster number, core number & VP
ID.
In preparation for using this register & its fields, introduce an
accessor macro for it & define its various bits with the typical style
preprocessor macros.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17007/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Introduce definitions & accessors for a selection of Coherence Manager
(CM) & Cluster Power Controller (CPC) registers that are new with CM
v3.5 & the MIPS I6500. These are primarily registers that will be used
in supporting multiple CPU clusters.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17006/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Make use of the new change_*, set_* & clear_* accessor functions for CPS
(CM, CPC & GIC) registers where doing so makes the code easier to read
or shortens it without adversely affecting readability.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17005/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
For read-write registers introduce accessor functions that simplify the
task of modifying a subset of bits within the register. set_* functions
set bits to 1, clear_* functions clear bits to 0 & change_* functions
set bits specified in a mask to an arbitrary value.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17004/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Tidy up asm/mips-cpc.h in a similar way to what "MIPS: CM: Use
BIT/GENMASK for register fields, order & drop shifts" did for
asm/mips-cm.h.
We use BIT() & GENMASK() to simplify the definition of register fields,
drop the _SHF definitions since that information can be found in the
_MSK ones, and then drop the _MSK suffix.
Fields definitions are moved to be next to the appropriate register
definition, making it easier to link the two & keep everything ordered
by register address. Comments are added including the name of each
register & a brief description of its purpose which helps to understand
what registers are for, link them back to hardware documentation or grep
for them.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17003/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Switch the MIPS Cluster Power Controller (CPC) accessor functions to be
generated by the new common Coherent Processing System (CPS) macros
shared with the Coherence Manager (CM).
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17002/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
If a restartable syscall is called using the indirect o32 syscall
handler - eg: syscall(__NR_waitid, ...), then it is possible for the
incorrect arguments to be passed to the syscall after it has been
restarted. This is because the syscall handler tries to shift all the
registers down one place in pt_regs so that when the syscall is restarted,
the "real" syscall is called instead. Unfortunately it only shifts the
arguments passed in registers, not the arguments on the user stack. This
causes the 4th argument to be duplicated when the syscall is restarted.
Fix by removing all the pt_regs shifting so that the indirect syscall
handler is called again when the syscall is restarted. The comment "some
syscalls like execve get their arguments from struct pt_regs" is long
out of date so this should now be safe.
Signed-off-by: James Cowgill <James.Cowgill@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Tested-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15856/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Since commit 669c409222 ("MIPS: Give __secure_computing() access to
syscall arguments."), upon syscall entry when seccomp is enabled,
syscall_trace_enter() passes a carefully prepared struct seccomp_data
containing syscall arguments to __secure_computing(). Unfortunately it
directly uses mips_get_syscall_arg() and fails to take into account the
indirect O32 system calls (i.e. syscall(2)) which put the system call
number in a0 and have the arguments shifted up by one entry.
We can't just revert that commit as samples/bpf/tracex5 would break
again, so use syscall_get_arguments() which already takes indirect
syscalls into account instead of directly using mips_get_syscall_arg(),
similar to what populate_seccomp_data() does.
This also removes the redundant error checking of the
mips_get_syscall_arg() return value (get_user() already zeroes the
result if an argument from the stack can't be loaded).
Reported-by: James Cowgill <James.Cowgill@imgtec.com>
Fixes: 669c409222 ("MIPS: Give __secure_computing() access to syscall arguments.")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: David Daney <david.daney@cavium.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16994/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
There's no reason for us not to use BIT() & GENMASK() in asm/mips-cm.h
when declaring macros corresponding to register fields. This patch
modifies our definitions to do so.
The *_SHF definitions are removed entirely - they duplicate information
found in the masks, are infrequently used & can be replaced with use of
__ffs() where needed.
The *_MSK definitions then lose their _MSK suffix which is now somewhat
redundant, and users are modified to match.
The field definitions are moved to follow the appropriate register's
accessor functions, which helps to keep the field definitions in order &
to find the appropriate fields for a given register. Whilst here a
comment is added describing each register & including its name, which is
helpful both for linking the register back to hardware documentation &
for grepping purposes.
This also cleans up a couple of issues that became obvious as a result
of making the changes described above:
- We previously had definitions for GCR_Cx_RESET_EXT_BASE & a phony
copy of that named GCR_RESET_EXT_BASE - a register which does not
exist. The bad definitions were added by commit 497e803ebf ("MIPS:
smp-cps: Ensure secondary cores start with EVA disabled") and made
use of from boot_core(), which is now modified to use the
GCR_Cx_RESET_EXT_BASE definitions.
- We had a typo in CM_GCR_ERROR_CAUSE_ERRINGO_MSK - we now correctly
define this as inFo rather than inGo.
Now that we don't duplicate field information between _SHF & _MSK
definitions, and keep the fields next to the register accessors, it will
be much easier to spot & prevent any similar oddities being introduced
in the future.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17001/
Patchwork: https://patchwork.linux-mips.org/patch/17216/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Some CM registers are always 32 bits, or at least only use bits in the
lower 32 bits of the register. For these registers it is wasteful for us
to generate accessors which bother to check mips_cm_is64 & perform 64
bit accesses.
This patch modifies the accessor generation to take into account the
size of the register, and for 32 bit registers we generate accessors
which only ever perform 32 bit accesses. For 64 bit registers we either
perform a 64 bit access or two 32 bit accesses, depending upon the value
of mips_cm_is64. Doing this saves us ~1.5KiB of code in a generic 64r6el
kernel, and perhaps more importantly simplifies various code paths.
This removes the read64_gcr_* accessors, so mips_cm_error_report() is
modified to stop using them & instead use the regular read_gcr_*
accessors which will return 64 bit values from the 64 bit registers.
The new accessor macros are placed in asm/mips-cps.h such that they can
be shared by CPC & GIC code in later patches.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17000/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
We currently have a mips_cm_base variable which holds the base address
of the Coherence Manager (CM) Global Configuration Registers (GCRs), and
accessor functions which use the GCR in their names. This works fine,
but gets in the way of sharing the code to generate the accessor
functions with other blocks (ie. CPC & GIC) because that code would then
need to separately handle the name of the base address variable & the
name used in the accessor functions.
In order to prepare for sharing the accessor generation code between CM,
CPC & GIC code this patch renames mips_cm_base to mips_gcr_base such
that the "gcr" portion is common to both the base address variable & the
accessor function names.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16999/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Add FP emulation debugfs statistics for individual instructions. The
debugfs files that contain counter values are placed in a separate
directory called "instructions". This means that the default path for
these new stat is "/sys/kernel/debug/mips/fpuemustats/instructions".
Each instruction counter is mapped to the debugfs file that has the
same name as instruction name. The lowercase is choosen as more
commonly used case for instruction names.
One example of usage:
mips_host::/sys/kernel/debug/mips/fpuemustats/instructions # grep "" *
The shortened output of this command is:
abs.d:34
abs.s:5711
add.d:10401
add.s:399307
bc1eqz:3199
...
...
...
sub.s:167211
trunc.l.d:375
trunc.l.s:8054
trunc.w.d:421
trunc.w.s:27032
The limitation of this patch is that it handles R6 FP emulation
instructions only. There are altogether 114 handled instructions.
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Cc: Douglas Leung <douglas.leung@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Maciej W. Rozycki <macro@imgtec.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17145/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Add capability for the user to clear all FP emu debugfs counters.
This is achieved by having a special debugfs file "fpuemustats_clear"
(under default location "/sys/kernel/debug/mips"). Each access to the
file results in setting all counters to zero (it is enough, let's say,
to issue a "cat /sys/kernel/debug/mips/fpuemustats_clear").
This functionality already exists for R2 emulation statistics,
but was missing for FP emulation statistics. The implementation in
this patch is consistent with its R2 emulation counterpart.
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Cc: Douglas Leung <douglas.leung@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17144/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Add FP emu debugfs counter for branches.
The new counter is displayed the same way as existing counter, and
its default path is /sys/kernel/debug/mips/fpuemustats/.
The limitation of this counter is that it counts only R6 branch
instructions BC1NEZ and BC1EQZ.
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Cc: Douglas Leung <douglas.leung@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Maciej W. Rozycki <macro@imgtec.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17143/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Fix content of CLASS.D output bits 32-63 to match hardware behavior.
Prior to this patch, bits 32-63 of CLASS.D output were not
initialized, causing different 32-63 bits content of CLASS.D, based on
circumstances. However, the hardware consistently returns all these
bits zeroed. The documentation is not clear whether these bits should
be zero or unpredictable. Since technically "all zero" case still can
be viewed as belonging to "unpredictable" class of results, it is
better to zero bits 32-63.
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Cc: Douglas Leung <douglas.leung@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Maciej W. Rozycki <macro@imgtec.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17142/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Reimplement RINT.<D|S> kernel emulation so that all RINT.<D|S>
specifications are met.
For the sake of simplicity, let's analyze RINT.S only. Prior to
this patch, RINT.S emulation was essentially implemented as (in
pseudocode) <output> = ieee754sp_flong(ieee754sp_tlong(<input>)),
where ieee754sp_tlong() and ieee754sp_flong() are functions
providing conversion from double to integer, and from integer
to double, respectively. On surface, this implementation looks
correct, but actually fails in many cases. Following problems
were detected:
1. NaN and infinity cases will not be handled properly. The
function ieee754sp_flong() never returns NaN nor infinity.
2. For RINT.S, for all inputs larger than LONG_MAX, and smaller
than FLT_MAX, the result will be wrong, and the overflow
exception will be erroneously set. A similar problem for
negative inputs exists as well.
3. For some rounding modes, for some negative inputs close to zero,
the return value will be zero, and should be -zero. This is
because ieee754sp_flong() never returns -zero.
This patch removes the problems above by implementing dedicated
functions for RINT.<D|S> emulation.
The core of the new function functionality is adapted version of
the core of the function ieee754sp_tlong(). However, there are many
details that are implemented to match RINT.<D|S> specification. It
should be said that the functionality of ieee754sp_tlong() actually
closely corresponds to CVT.L.S instruction, and it is used while
emulating CVT.L.S. However, RINT.S and CVT.L.S instructions differ
in many aspects. This patch fulfills missing support for RINT.<D|S>.
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Douglas Leung <douglas.leung@imgtec.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Maciej W. Rozycki <macro@imgtec.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17141/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Fix CMP.Sxxx.<D|S> SIGILL crashes by fixing main switch/case statement
in fpu_emul() function so that inadvertent fall-troughs are prevented.
Consider, let's say, CMP.SAF.S instruction when one of inputs is zero
and another input is a signaling NaN. The desired output is zero, and
the exception flag "invalid operation" set. For such case, the main
portion of the implementation is within "d_fmt" case of the main
"switch/case" statement in fpu_emul() function. The execution will
follow one of "if-else" branches that doesn't contain "goto cop1scr;"
statement, and will therefore reach the end of "d_fmt" case. It will
subsequently fall through to the next case, "l_fmt". After following
similar pattern, the execution will fall through to the succeeding
case, which is "default". The "default" case contains "return SIGILL;"
statement only. This means that the caller application will crash
with "illegal instruction" message.
It is obvious that above described fall-throughs are unnecessary and
harmful. This patch rectifies that behavior by providing "break;"
statements at the end of cases "d_fmt" and "l_fmt".
There are 22 instructions affected by this problem:
CMP.<SAF|SEQ|SLE|SLT|SNE|SOR|SUEQ|SULE|SULT|SUN|SUNE>.<D|S>.
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Cc: Douglas Leung <douglas.leung@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Maciej W. Rozycki <macro@imgtec.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17140/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Implement fused multiply-add with correct accuracy.
Fused multiply-add operation has better accuracy than respective
sequential execution of multiply and add operations applied on the
same inputs. This is because accuracy errors accumulate in latter
case.
This patch implements fused multiply-add with the same accuracy
as it is implemented in hardware, using 128-bit intermediate
calculations.
One test case example (raw bits) that this patch fixes:
MADDF.D fd,fs,ft:
fd = 0x00000ca000000000
fs = ft = 0x3f40624dd2f1a9fc
Fixes: e24c3bec3e ("MIPS: math-emu: Add support for the MIPS R6 MADDF FPU instruction")
Fixes: 83d43305a1 ("MIPS: math-emu: Add support for the MIPS R6 MSUBF FPU instruction")
Signed-off-by: Douglas Leung <douglas.leung@imgtec.com>
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Cc: Douglas Leung <douglas.leung@imgtec.com>
Cc: Bo Hu <bohu@google.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Jin Qian <jinqian@google.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: <stable@vger.kernel.org> # 4.7+
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16891/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Implement fused multiply-add with correct accuracy.
Fused multiply-add operation has better accuracy than respective
sequential execution of multiply and add operations applied on the
same inputs. This is because accuracy errors accumulate in latter
case.
This patch implements fused multiply-add with the same accuracy
as it is implemented in hardware, using 64-bit intermediate
calculations.
One test case example (raw bits) that this patch fixes:
MADDF.S fd,fs,ft:
fd = 0x22575225
fs = ft = 0x3727c5ac
Fixes: e24c3bec3e ("MIPS: math-emu: Add support for the MIPS R6 MADDF FPU instruction")
Fixes: 83d43305a1 ("MIPS: math-emu: Add support for the MIPS R6 MSUBF FPU instruction")
Signed-off-by: Douglas Leung <douglas.leung@imgtec.com>
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Cc: Douglas Leung <douglas.leung@imgtec.com>
Cc: Bo Hu <bohu@google.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Jin Qian <jinqian@google.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: <stable@vger.kernel.org> # 4.7+
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16890/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Fix definition and usage of "maddf_flags" enumeration. Avoid duplicate
definition and apply more common capitalization.
This patch does not change any scenario. It just makes MADDF and
MSUBF emulation code more readable and easier to maintain, and
hopefully prevents future bugs as well.
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: Bo Hu <bohu@google.com>
Cc: Douglas Leung <douglas.leung@imgtec.com>
Cc: Jin Qian <jinqian@google.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: <stable@vger.kernel.org> # 4.7+
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16889/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Fix the cases of <MADDF|MSUBF>.<D|S> when any of two multiplicands is
+0 or -0, and the third input is also +0 or -0. Depending on the signs
of inputs, certain special cases must be handled.
A relevant example:
MADDF.S fd,fs,ft:
If fs contains +0.0, ft contains -0.0, and fd contains 0.0, fd is
going to contain +0.0 (without this patch, it used to contain -0.0).
Fixes: e24c3bec3e ("MIPS: math-emu: Add support for the MIPS R6 MADDF FPU instruction")
Fixes: 83d43305a1 ("MIPS: math-emu: Add support for the MIPS R6 MSUBF FPU instruction")
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: Bo Hu <bohu@google.com>
Cc: Douglas Leung <douglas.leung@imgtec.com>
Cc: Jin Qian <jinqian@google.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: <stable@vger.kernel.org> # 4.7+
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16888/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Fix the cases of <MADDF|MSUBF>.<D|S> when any of two multiplicands is
infinity. The correct behavior in such cases is affected by the nature
of third input. Cases of addition of infinities with opposite signs
and subtraction of infinities with same signs may arise and must be
handles separately. Also, the value od flags argument (that determines
whether the instruction is MADDF or MSUBF) affects the outcome.
Relevant examples:
MADDF.S fd,fs,ft:
If fs contains +inf, ft contains +inf, and fd contains -inf, fd is
going to contain indef (without this patch, it used to contain
-inf).
MSUBF.S fd,fs,ft:
If fs contains +inf, ft contains 1.0, and fd contains +0.0, fd is
going to contain -inf (without this patch, it used to contain +inf).
Fixes: e24c3bec3e ("MIPS: math-emu: Add support for the MIPS R6 MADDF FPU instruction")
Fixes: 83d43305a1 ("MIPS: math-emu: Add support for the MIPS R6 MSUBF FPU instruction")
Signed-off-by: Douglas Leung <douglas.leung@imgtec.com>
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: Douglas Leung <douglas.leung@imgtec.com>
Cc: Bo Hu <bohu@google.com>
Cc: Jin Qian <jinqian@google.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: <stable@vger.kernel.org> # 4.7+
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16887/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Fix the cases of <MADDF|MSUBF>.<D|S> when any of three inputs is any
NaN. Correct behavior of <MADDF|MSUBF>.<D|S> fd, fs, ft is following:
- if any of inputs is sNaN, return a sNaN using following rules: if
only one input is sNaN, return that one; if more than one input is
sNaN, order of precedence for return value is fd, fs, ft
- if no input is sNaN, but at least one of inputs is qNaN, return a
qNaN using following rules: if only one input is qNaN, return that
one; if more than one input is qNaN, order of precedence for
return value is fd, fs, ft
The previous code contained correct handling of some above cases, but
not all. Also, such handling was scattered into various cases of
"switch (CLPAIR(xc, yc))" statement, and elsewhere. With this patch,
this logic is placed in one place, and "switch (CLPAIR(xc, yc))" is
significantly simplified.
A relevant example:
MADDF.S fd,fs,ft:
If fs contains qNaN1, ft contains qNaN2, and fd contains qNaN3, fd
is going to contain qNaN3 (without this patch, it used to contain
qNaN1).
Fixes: e24c3bec3e ("MIPS: math-emu: Add support for the MIPS R6 MADDF FPU instruction")
Fixes: 83d43305a1 ("MIPS: math-emu: Add support for the MIPS R6 MSUBF FPU instruction")
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: Bo Hu <bohu@google.com>
Cc: Douglas Leung <douglas.leung@imgtec.com>
Cc: Jin Qian <jinqian@google.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: <stable@vger.kernel.org> # 4.7+
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16886/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Fix following special cases for MINA>.<D|S>:
- if one of the inputs is zero, and the other is subnormal, normal,
or infinity, the value of the former should be returned (that is,
a zero).
- if one of the inputs is infinity, and the other input is normal,
or subnormal, the value of the latter should be returned.
The previous implementation's logic for such cases was incorrect - it
appears as if it implements MAXA, and not MINA instruction.
A relevant example:
MINA.S fd,fs,ft:
If fs contains 100.0, and ft contains 0.0, fd is going to contain
0.0 (without this patch, it used to contain 100.0).
Fixes: a79f5f9ba5 ("MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction")
Fixes: 4e9561b20e ("MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction")
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: Bo Hu <bohu@google.com>
Cc: Douglas Leung <douglas.leung@imgtec.com>
Cc: Jin Qian <jinqian@google.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: <stable@vger.kernel.org> # 4.3+
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16885/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Fix the value returned by <MAXA|MINA>.<D|S> fd,fs,ft, if both inputs
are infinite. The previous implementation returned always the value
contained in ft in such cases. The correct behavior is specified
in Mips instruction set manual and is as follows:
fs ft MAXA MINA
---------------------------------
inf inf inf inf
inf -inf inf -inf
-inf inf inf -inf
-inf -inf -inf -inf
A relevant example:
MAXA.S fd,fs,ft:
If fs contains +inf, and ft contains -inf, fd is going to contain
+inf (without this patch, it used to contain -inf).
Fixes: a79f5f9ba5 ("MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction")
Fixes: 4e9561b20e ("MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction")
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: Bo Hu <bohu@google.com>
Cc: Douglas Leung <douglas.leung@imgtec.com>
Cc: Jin Qian <jinqian@google.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: <stable@vger.kernel.org> # 4.3+
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16884/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Fix the value returned by <MAXA|MINA>.<D|S>, if the inputs are normal
fp numbers of the same absolute value, but opposite signs.
A relevant example:
MAXA.S fd,fs,ft:
If fs contains -3.0, and ft contains +3.0, fd is going to contain
+3.0 (without this patch, it used to contain -3.0).
Fixes: a79f5f9ba5 ("MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction")
Fixes: 4e9561b20e ("MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction")
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: Bo Hu <bohu@google.com>
Cc: Douglas Leung <douglas.leung@imgtec.com>
Cc: Jin Qian <jinqian@google.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: <stable@vger.kernel.org> # 4.3+
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16883/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Fix the value returned by <MAX|MIN>.<D|S>, if both inputs are negative
normal fp numbers. The previous logic did not take into account that
if both inputs have the same sign, there should be separate treatment
of the cases when both inputs are negative and when both inputs are
positive.
A relevant example:
MAX.S fd,fs,ft:
If fs contains -5.0, and ft contains -7.0, fd is going to contain
-5.0 (without this patch, it used to contain -7.0).
Fixes: a79f5f9ba5 ("MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction")
Fixes: 4e9561b20e ("MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction")
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: Bo Hu <bohu@google.com>
Cc: Douglas Leung <douglas.leung@imgtec.com>
Cc: Jin Qian <jinqian@google.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: <stable@vger.kernel.org> # 4.3+
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16882/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Fix the value returned by <MAX|MAXA|MIN|MINA>.<D|S>, if both inputs
are zeros. The right behavior in such cases is stated in instruction
reference manual and is as follows:
fs ft MAX MIN MAXA MINA
---------------------------------------------
0 0 0 0 0 0
0 -0 0 -0 0 -0
-0 0 0 -0 0 -0
-0 -0 -0 -0 -0 -0
Prior to this patch, some of the above cases were yielding correct
results. However, for the sake of code consistency, all such cases
are rewritten in this patch.
A relevant example:
MAX.S fd,fs,ft:
If fs contains +0.0, and ft contains -0.0, fd is going to contain
+0.0 (without this patch, it used to contain -0.0).
Fixes: a79f5f9ba5 ("MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction")
Fixes: 4e9561b20e ("MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction")
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: Bo Hu <bohu@google.com>
Cc: Douglas Leung <douglas.leung@imgtec.com>
Cc: Jin Qian <jinqian@google.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: <stable@vger.kernel.org> # 4.3+
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16881/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Fix the value returned by <MAX|MAXA|MIN|MINA>.<D|S> fd,fs,ft, if both
inputs are quiet NaNs. The <MAX|MAXA|MIN|MINA>.<D|S> specifications
state that the returned value in such cases should be the quiet NaN
contained in register fs.
A relevant example:
MAX.S fd,fs,ft:
If fs contains qNaN1, and ft contains qNaN2, fd is going to contain
qNaN1 (without this patch, it used to contain qNaN2).
Fixes: a79f5f9ba5 ("MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction")
Fixes: 4e9561b20e ("MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction")
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: Bo Hu <bohu@google.com>
Cc: Douglas Leung <douglas.leung@imgtec.com>
Cc: Jin Qian <jinqian@google.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: <stable@vger.kernel.org> # 4.3+
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16880/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
We currently have various variables & functions which are only used
within a single translation unit, but which we don't declare static.
This causes various sparse warnings of the form:
arch/mips/kernel/mips-r2-to-r6-emul.c:49:1: warning: symbol
'mipsr2emustats' was not declared. Should it be static?
arch/mips/kernel/unaligned.c:1381:11: warning: symbol 'reg16to32st'
was not declared. Should it be static?
arch/mips/mm/mmap.c:146:15: warning: symbol 'arch_mmap_rnd' was not
declared. Should it be static?
Fix these & others by declaring various affected variables & functions
static, avoiding the sparse warnings & redundant symbols.
[ralf@linux-mips.org: Add Marcin's build fix.]
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: trivial@kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17176/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The plat_timer_setup() function is entirely unused - nothing calls it,
and no platforms provide it. Perhaps our dummy implementation was once
useful as an aid in forward porting platforms, but its time has long
since passed so let's remove the dead code.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: trivial@kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17175/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The fault_addr argument to fpu_emulator_cop1Handler(), fpux_emu() and
cop1Emulate() has up until now been declared as:
void *__user *fault_addr
This is essentially a pointer in user memory which points to a pointer
to void. This is not the intent for our code, which is actually
operating on a pointer to a pointer to void where the pointer to void is
pointing at user memory. ie. the pointer is in kernel memory & points to
user memory.
This mismatch produces a lot of sparse warnings that look like this:
arch/mips/math-emu/cp1emu.c:1485:45:
warning: incorrect type in assignment (different address spaces)
expected void *[noderef] <asn:1><noident>
got unsigned int [noderef] [usertype] <asn:1>*[assigned] va
Fix these by modifying the declaration of the fault_addr argument to:
void __user **fault_addr
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: trivial@kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17173/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
arch/mips/mm/init.c provides our implementation of free_initrd_mem(),
but doesn't include the linux/initrd.h header which declares them. This
leads to a warning from sparse:
arch/mips/mm/init.c:501:6: warning: symbol 'free_initrd_mem' was not
declared. Should it be static?
Fix this by including linux/initrd.h to get the declaration of
free_initrd_mem().
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: trivial@kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17172/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
arch/mips/mm/mmap.c provides our implementations of the arch_mmap_rnd()
& arch_randomize_brk() functions, but doesn't include the
linux/elf-randomize.h header which declares them. This leads to warnings
from sparse:
arch/mips/mm/mmap.c:146:15: warning: symbol 'arch_mmap_rnd' was not
declared. Should it be static?
arch/mips/mm/mmap.c:190:15: warning: symbol 'arch_randomize_brk' was
not declared. Should it be static?
Fix this by including linux/elf-randomize.h to get the declarations of
arch_mmap_rnd() & arch_randomize_brk().
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: trivial@kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17171/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
arch/mips/lib/delay.c provides our implementations of the __delay(),
__ndelay() & __udelay() functions, but doesn't include the asm/delay.h
header which declares them. This leads to warnings from sparse:
arch/mips/lib/delay.c:26:6: warning: symbol '__delay' was not
declared. Should it be static?
arch/mips/lib/delay.c:50:6: warning: symbol '__udelay' was not
declared. Should it be static?
arch/mips/lib/delay.c:58:6: warning: symbol '__ndelay' was not
declared. Should it be static?
To keep checkpatch happy was well, include <linux/delay.h> rather than
<asm/delay.h> directly to get the declarations of __delay(), __ndelay() &
__udelay().
[ralf@linux-mips.org: Fixed to include <linux/delay.h.]
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: trivial@kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17170/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
arch/mips/kernel/idle.c provides our implementation of the
arch_cpu_idle() function, but doesn't include the linux/cpu.h header
which declares it. This leads to a warning from sparse:
arch/mips/kernel/idle.c:256:6: warning: symbol 'arch_cpu_idle' was not
declared. Should it be static?
Fix this by including linux/cpu.h to get the declaration of
arch_cpu_idle().
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: trivial@kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17169/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
arch/mips/mm/cache.c provides our implementation of the cpu_cache_init()
function, but doesn't include the asm/setup.h header which declares it.
This leads to a warning from sparse:
arch/mips/mm/cache.c:274:6: warning: symbol 'cpu_cache_init' was not
declared. Should it be static?
Fix this by including asm/setup.h to get the declaration of
cpu_cache_init().
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: trivial@kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17168/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
arch/mips/generic/irq.c provides implementations of the
get_c0_compare_int() & get_c0_perfcount_int() functions, but doesn't
include the asm/time.h header which declares them. This leads to
warnings from sparse:
arch/mips/generic/irq.c:36:5: warning: symbol 'get_c0_perfcount_int'
was not declared. Should it be static?
arch/mips/generic/irq.c:52:14: warning: symbol 'get_c0_compare_int'
was not declared. Should it be static?
Fix this by including asm/time.h to get the declarations of
get_c0_compare_int() & get_c0_perfcount_int().
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: trivial@kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17167/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
arch/mips/generic/init.c provides an implementation of the
plat_fdt_relocated() function, but doesn't include the asm/bootinfo.h
header which declares it. This leads to a warning from sparse:
arch/mips/generic/init.c:94:13: warning: symbol 'plat_fdt_relocated' was
not declared. Should it be static?
Fix this by including asm/bootinfo.h to get the declaration of
plat_fdt_relocated(). We also #ifdef our definition of
plat_fdt_relocated() such that it is only provided when
CONFIG_RELOCATABLE is set, matching the header & avoiding the redundant
function for non-relocatable kernels.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: trivial@kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17166/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Besides eliminating lots of duplication this also allows allocations with
the DMA_ATTR_NON_CONSISTENT to use the CMA allocator.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17181/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This introduces threaded carddetect irqs for the db1200/db1300 boards.
Main benefit is that the broken insertion/ejection interrupt pairs
can now be better supported and debounced in software.
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15287/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
No advanced MIPS features for Alchemy.
This patch shaves additional 43kB off the DB1300 kernel
(~0.5% size reduction).
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15286/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Prints the devboard name in cpuinfo "machine" line.
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15285/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
GCC-7 complains about a boolean value being used with an arithmetic
AND:
arch/mips/math-emu/cp1emu.c: In function 'cop1Emulate':
arch/mips/math-emu/cp1emu.c:838:14: warning: '~' on a boolean expression [-Wbool-operation]
fpr = (x) & ~(cop1_64bit(xcp) == 0); \
^
arch/mips/math-emu/cp1emu.c:1068:3: note: in expansion of macro 'DITOREG'
DITOREG(dval, MIPSInst_RT(ir));
^~~~~~~
arch/mips/math-emu/cp1emu.c:838:14: note: did you mean to use logical not?
fpr = (x) & ~(cop1_64bit(xcp) == 0); \
Since cop1_64bit() returns and int, just flip the LSB.
Suggested-by: Maciej W. Rozycki <macro@imgtec.com>
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Reviewed-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17058/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Add devicetree nodes for the DM9000 and the ethernet power regulator.
Additionally, add a new pinctrl node for the ethernet chip's pins.
Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com>
Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: devicetree@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16752/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Move the NI 169445 board flattened image tree source into its own file
which is concatenated into the final image tree source used to build the
flattened image tree. Separating boards into different files will help
us to avoid conflicts as boards are added.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Nathan Sullivan <nathan.sullivan@ni.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16940/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Move the Boston board flattened image tree source into its own file
which is concatenated into the final image tree source used to build the
flattened image tree. Separating boards into different files will help
us to avoid conflicts as boards are added.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16939/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
In preparation for splitting arch/mips/generic/vmlinux.its.S into
multiple files such that it doesn't become a conflict magnet as boards
are added, allow platforms to specify a list of image tree source files
which will be concatenated to form the final source used to build the
image tree.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16938/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Define Cavium Octeon as a CPU that has support for mips32r1, mips32r2 and
mips64r1. This will affect show_cpuinfo() that will now correctly expose
mips32r1, mips32r2 and mips64r1 as supported ISAs.
Signed-off-by: Petar Jovanovic <petar.jovanovic@rt-rk.com>
Reviewed-by: Maciej W. Rozycki <macro@imgtec.com>
Acked-by: David Daney <david.daney@cavium.com>
Cc: petar.jovanovic@imgtec.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15749/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Commit a53e35db70 ("reset: Ensure drivers are explicit when requesting
reset lines") started to transition the reset control request API calls
to explicitly state whether the driver needs exclusive or shared reset
control behavior. Convert all drivers requesting exclusive resets to the
explicit API call so the temporary transition helpers can be removed.
No functional changes.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16785/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
When the upstream kernel pistachio_defconfig is built & tested on the
ci40 platform the current lack of these options leads to essentially
false failures when the RFS fails to mount.
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: James Hartley <james.hartley@sondrel.com>
Cc: Ionela Voinescu <ionela.voinescu@imgtec.com>
Cc: James Hartley <james.hartley@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16763/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Commit a7be6e5a7f ("mm: drop useless local parameters of
__register_one_node()") removes the last user of parent_node().
The parent_node() macros in both IP27 and Loongson64 are unnecessary.
Remove it for cleanup.
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16873/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Commit 1a3d59579b ("MIPS: Tidy up FPU context switching") removed
usage of ST_OFF, leaving it behind as dead code. Commit 828d1e4e98
("MIPS: Remove dead define of ST_OFF") then removed the definition of
ST_OFF from r4k_switch.S as a cleanup. However the unused definition of
ST_OFF has been left behind in r2300_switch.S. Remove it.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16239/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Move _save_fp(), _restore_fp() & _init_fpu() out of r2300_switch.S &
into r2300_fpu.S. This logically places all FP-related asm code into
r2300_fpu.S & provides consistency with R4K after the preceding commit.
Besides cleaning up this will be useful for later patches which disable
FP support.
[ralf@linux-mips.org: Fixed build issues reported by Arnd Bergmann
<arnd@arndb.de>]
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16238/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Move _save_fp(), _restore_fp(), _save_msa(), _restore_msa(),
_init_msa_upper() & _init_fpu() out of r4k_switch.S & into r4k_fpu.S.
This allows us to clean up the way in which Octeon includes the default
r4k implementations of these FP functions despite replacing resume(),
and makes CONFIG_R4K_FPU more straightforwardly represent all
configurations that have an R4K-style FPU, including Octeon.
Besides cleaning up this will be useful for later patches which disable
FP support.
[ralf@linux-mips.org: Fixed build issues reported by Arnd Bergmann
<arnd@arndb.de>]
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16237/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The kernel contains a small amount of incomplete code aimed at
supporting old R6000 CPUs. This is:
- Unused, as no machine selects CONFIG_SYS_HAS_CPU_R6000.
- Broken, since there are glaring errors such as r6000_fpu.S moving
the FCSR register to t1, then ignoring it & instead saving t0 into
struct sigcontext...
- A maintenance headache, since it's code that nobody can test which
nevertheless imposes constraints on code which it shares with other
machines.
Remove this incomplete & broken R6000 CPU support in order to clean up
and in preparation for changes which will no longer need to consider
dragging the pretense of R6000 support along with them.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16236/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The r2_decoder_tables are never modified. They are arrays of constant
values and as such should be declared const.
This change saves 256 bytes of kernel text, and 128 bytes of kernel data
(384 bytes total) on a 32r6el_defconfig (with SMP disabled)
Before:
text data bss dec hex filename
5576221 1080804 267040 6924065 69a721 vmlinux
After:
text data bss dec hex filename
5575965 1080676 267040 6923681 69a5a1 vmlinux
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15289/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
smp_ops providers do not modify their ops structures, so they should be
made const for robustness. Since currently the MIPS kernel is not mapped
with memory protection, this does not in itself provide any security
benefit, but it still makes sense to make this change.
There are also slight code size efficincies from the structure being
made read-only, saving 128 bytes of kernel text on a
pistachio_defconfig.
Before:
text data bss dec hex filename
7187239 1772752 470224 9430215 8fe4c7 vmlinux
After:
text data bss dec hex filename
7187111 1772752 470224 9430087 8fe447 vmlinux
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Cc: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Doug Ledford <dledford@redhat.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Joe Perches <joe@perches.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Steven J. Hill <steven.hill@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16784/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Remove options which do not exist anymore:
- CPU_FREQ_DEBUG is gone since commit 2d06d8c49a ("[CPUFREQ] use
dynamic debug instead of custom infrastructure").
- ECONET is gone since commit 349f29d841 ("econet: remove ancient bug
ridden protocol");
- IPDDP_DECAP is gone since commit 9b5645b513 ("appletalk: remove
"config IPDDP_DECAP"");
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16770/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
struct call_single_data is used in IPIs to transfer information between
CPUs. Its size is bigger than sizeof(unsigned long) and less than
cache line size. Currently it is not allocated with any explicit alignment
requirements. This makes it possible for allocated call_single_data to
cross two cache lines, which results in double the number of the cache lines
that need to be transferred among CPUs.
This can be fixed by requiring call_single_data to be aligned with the
size of call_single_data. Currently the size of call_single_data is the
power of 2. If we add new fields to call_single_data, we may need to
add padding to make sure the size of new definition is the power of 2
as well.
Fortunately, this is enforced by GCC, which will report bad sizes.
To set alignment requirements of call_single_data to the size of
call_single_data, a struct definition and a typedef is used.
To test the effect of the patch, I used the vm-scalability multiple
thread swap test case (swap-w-seq-mt). The test will create multiple
threads and each thread will eat memory until all RAM and part of swap
is used, so that huge number of IPIs are triggered when unmapping
memory. In the test, the throughput of memory writing improves ~5%
compared with misaligned call_single_data, because of faster IPIs.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Huang, Ying <ying.huang@intel.com>
[ Add call_single_data_t and align with size of call_single_data. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Aaron Lu <aaron.lu@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/87bmnqd6lz.fsf@yhuang-mobile.sh.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There is code duplicated over all architecture's headers for
futex_atomic_op_inuser. Namely op decoding, access_ok check for uaddr,
and comparison of the result.
Remove this duplication and leave up to the arches only the needed
assembly which is now in arch_futex_atomic_op_inuser.
This effectively distributes the Will Deacon's arm64 fix for undefined
behaviour reported by UBSAN to all architectures. The fix was done in
commit 5f16a046f8 (arm64: futex: Fix undefined behaviour with
FUTEX_OP_OPARG_SHIFT usage). Look there for an example dump.
And as suggested by Thomas, check for negative oparg too, because it was
also reported to cause undefined behaviour report.
Note that s390 removed access_ok check in d12a29703 ("s390/uaccess:
remove pointless access_ok() checks") as access_ok there returns true.
We introduce it back to the helper for the sake of simplicity (it gets
optimized away anyway).
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> [s390]
Acked-by: Chris Metcalf <cmetcalf@mellanox.com> [for tile]
Reviewed-by: Darren Hart (VMware) <dvhart@infradead.org>
Reviewed-by: Will Deacon <will.deacon@arm.com> [core/arm64]
Cc: linux-mips@linux-mips.org
Cc: Rich Felker <dalias@libc.org>
Cc: linux-ia64@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: peterz@infradead.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: sparclinux@vger.kernel.org
Cc: Jonas Bonn <jonas@southpole.se>
Cc: linux-s390@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: linux-hexagon@vger.kernel.org
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: linux-snps-arc@lists.infradead.org
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-xtensa@linux-xtensa.org
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: openrisc@lists.librecores.org
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Stafford Horne <shorne@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Richard Henderson <rth@twiddle.net>
Cc: Chris Zankel <chris@zankel.net>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-parisc@vger.kernel.org
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: linux-alpha@vger.kernel.org
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: "David S. Miller" <davem@davemloft.net>
Link: http://lkml.kernel.org/r/20170824073105.3901-1-jslaby@suse.cz
There is a missing break causing a fall-through and setting
ctx.use_bbit_insns to the wrong value. Fix this by adding the
missing break.
Detected with cppcheck:
"Variable 'ctx.use_bbit_insns' is reassigned a value before the old
one has been used. 'break;' missing?"
Fixes: 8d8d18c328 ("MIPS,bpf: Fix using smp_processor_id() in preemptible splat.")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: David Daney <david.daney@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The code looks a little cleaner if we replace BPF_OP(insn->code) with
the local variable bpf_op. Caching the value this way also saves 300
bytes (about 1%) in the code size of the JIT.
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the kernel is configured with preemption enabled we were getting
warning stack traces for use of current_cpu_type().
Fix by moving the test between preempt_disable()/preempt_enable() and
caching the results of the CPU type tests for use during code
generation.
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is no dependency between the two, so remove the dependency in
Kconfig files.
Signed-off-by: Sean Young <sean@mess.org>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
In a recent discussion Maciej Rozycki reported that this case is
impossible.
Handle the impossible case by just returning instead of trying to
handle it. This makes static analysis simpler as it means nothing
needs to consider the impossible case after the return statement.
As the code no longer has to deal with this case remove FPE_FIXME from
the mips siginfo.h
Cc: "Maciej W. Rozycki" <macro@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Link: http://lkml.kernel.org/r/20170718140651.15973-4-ebiederm@xmission.com
Ref: ea1b75cf91 ("signal/mips: Document a conflict with SI_USER with SIGFPE")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Pull MIPS fixes from Ralf Baechle:
"Another round of MIPS fixes:
- compressed boot: Ignore a generated .c file
- VDSO: Fix a register clobber list
- DECstation: Fix an int-handler.S CPU_DADDI_WORKAROUNDS regression
- Octeon: Fix recent cleanups that cleaned away a bit too much thus
breaking the arch side of the EDAC and USB drivers.
- uasm: Fix duplicate const in "const struct foo const bar[]" which
GCC 7.1 no longer accepts.
- Fix race on setting and getting cpu_online_mask
- Fix preemption issue. To do so cleanly introduce macro to get the
size of L3 cache line.
- Revert include cleanup that sometimes results in build error
- MicroMIPS uses bit 0 of the PC to indicate microMIPS mode. Make
sure this bit is set for kernel entry as well.
- Prevent configuring the kernel for both microMIPS and MT. There are
no such CPUs currently and thus the combination is unsupported and
results in build errors.
This has been sitting in linux-next for a few days and has survived
automated testing by Imagination's test farm. No known regressions
pending except a number of issues that crept up due to lots of people
switching to GCC 7.1"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: Set ISA bit in entry-y for microMIPS kernels
MIPS: Prevent building MT support for microMIPS kernels
MIPS: PCI: Fix smp_processor_id() in preemptible
MIPS: Introduce cpu_tcache_line_size
MIPS: DEC: Fix an int-handler.S CPU_DADDI_WORKAROUNDS regression
MIPS: VDSO: Fix clobber lists in fallback code paths
Revert "MIPS: Don't unnecessarily include kmalloc.h into <asm/cache.h>."
MIPS: OCTEON: Fix USB platform code breakage.
MIPS: Octeon: Fix broken EDAC driver.
MIPS: gitignore: ignore generated .c files
MIPS: Fix race on setting and getting cpu_online_mask
MIPS: mm: remove duplicate "const" qualifier on insn_table
We are planning to share more code between different NAND based
devices (SPI NAND, OneNAND and raw NANDs), but before doing that
we need to move the existing include/linux/mtd/nand.h file into
include/linux/mtd/rawnand.h so we can later create a nand.h header
containing all common structure and function prototypes.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Peter Pan <peterpandong@micron.com>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: Wenyou Yang <wenyou.yang@microchip.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Han Xu <han.xu@nxp.com>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-By: Harvey Hunt <harveyhuntnexus@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Krzysztof Halasa <khalasa@piap.pl>
The UDP offload conflict is dealt with by simply taking what is
in net-next where we have removed all of the UFO handling code
entirely.
The TCP conflict was a case of local variables in a function
being removed from both net and net-next.
In netvsc we had an assignment right next to where a missing
set of u64 stats sync object inits were added.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
"The pull requests are getting smaller, that's progress I suppose :-)
1) Fix infinite loop in CIPSO option parsing, from Yujuan Qi.
2) Fix remote checksum handling in VXLAN and GUE tunneling drivers,
from Koichiro Den.
3) Missing u64_stats_init() calls in several drivers, from Florian
Fainelli.
4) TCP can set the congestion window to an invalid ssthresh value
after congestion window reductions, from Yuchung Cheng.
5) Fix BPF jit branch generation on s390, from Daniel Borkmann.
6) Correct MIPS ebpf JIT merge, from David Daney.
7) Correct byte order test in BPF test_verifier.c, from Daniel
Borkmann.
8) Fix various crashes and leaks in ASIX driver, from Dean Jenkins.
9) Handle SCTP checksums properly in mlx4 driver, from Davide
Caratti.
10) We can potentially enter tcp_connect() with a cached route
already, due to fastopen, so we have to explicitly invalidate it.
11) skb_warn_bad_offload() can bark in legitimate situations, fix from
Willem de Bruijn"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits)
net: avoid skb_warn_bad_offload false positives on UFO
qmi_wwan: fix NULL deref on disconnect
ppp: fix xmit recursion detection on ppp channels
rds: Reintroduce statistics counting
tcp: fastopen: tcp_connect() must refresh the route
net: sched: set xt_tgchk_param par.net properly in ipt_init_target
net: dsa: mediatek: add adjust link support for user ports
net/mlx4_en: don't set CHECKSUM_COMPLETE on SCTP packets
qed: Fix a memory allocation failure test in 'qed_mcp_cmd_init()'
hysdn: fix to a race condition in put_log_buffer
s390/qeth: fix L3 next-hop in xmit qeth hdr
asix: Fix small memory leak in ax88772_unbind()
asix: Ensure asix_rx_fixup_info members are all reset
asix: Add rx->ax_skb = NULL after usbnet_skb_return()
bpf: fix selftest/bpf/test_pkt_md_access on s390x
netvsc: fix race on sub channel creation
bpf: fix byte order test in test_verifier
xgene: Always get clk source, but ignore if it's missing for SGMII ports
MIPS: Add missing file for eBPF JIT.
bpf, s390: fix build for libbpf and selftest suite
...
When building a kernel for the microMIPS ISA, ensure that the ISA bit
(ie. bit 0) in the entry address is set. Otherwise we may include an
entry address in images which bootloaders will jump to as MIPS32 code.
I originally tried using "objdump -f" to obtain the entry address, which
works for microMIPS but it always outputs a 32 bit address for a 32 bit
ELF whilst nm will sign extend to 64 bit. That matters for systems where
we might want to run a MIPS32 kernel on a MIPS64 CPU & load it with a
MIPS64 bootloader, which would then jump to a non-canonical
(non-sign-extended) address.
This works in all cases as it only changes the behaviour for microMIPS
kernels, but isn't the prettiest solution. A possible alternative would
be to write a custom tool to just extract, sign extend & print the entry
point of an ELF executable. I'm open to feedback if that would be
preferred.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16950/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
We don't currently support the MT ASE for microMIPS kernels, and there
are no CPUs currently in existence that use both. They can however both
be enabled in Kconfig, resulting in build failures such as:
AS arch/mips/kernel/cps-vec.o
arch/mips/kernel/cps-vec.S: Assembler messages:
arch/mips/kernel/cps-vec.S:242: Warning: the 32-bit microMIPS architecture does not support the `mt' extension
arch/mips/kernel/cps-vec.S:276: Error: unrecognized opcode `mttc0 $13,$2,2'
arch/mips/kernel/cps-vec.S:282: Error: unrecognized opcode `mttc0 $8,$1,2'
arch/mips/kernel/cps-vec.S:285: Error: unrecognized opcode `mttc0 $0,$2,1'
...
Fix this by preventing MT from being enabled when targeting microMIPS.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16951/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
If a vcpu exits due to request a user mode spinlock, then
the spinlock-holder may be preempted in user mode or kernel mode.
(Note that not all architectures trap spin loops in user mode,
only AMD x86 and ARM/ARM64 currently do).
But if a vcpu exits in kernel mode, then the holder must be
preempted in kernel mode, so we should choose a vcpu in kernel mode
as a more likely candidate for the lock holder.
This introduces kvm_arch_vcpu_in_kernel() to decide whether the
vcpu is in kernel-mode when it's preempted. kvm_vcpu_on_spin's
new argument says the same of the spinning VCPU.
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 1c3c5eab17 ("sched/core: Enable might_sleep() and
smp_processor_id() checks early") enables checks for might_sleep() and
smp_processor_id() being used in preemptible code earlier in the boot
than before. This results in a new BUG from
pcibios_set_cache_line_size().
BUG: using smp_processor_id() in preemptible [00000000] code:
swapper/0/1 caller is pcibios_set_cache_line_size+0x10/0x70
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.13.0-rc1-00007-g3ce3e4ba4275 #615
Stack: 0000000000000000 ffffffff81189694 0000000000000000 ffffffff81822318
000000000000004e 0000000000000001 800000000e20bd08 20c49ba5e3540000
0000000000000000 0000000000000000 ffffffff818d0000 0000000000000000
0000000000000000 ffffffff81189328 ffffffff818ce692 0000000000000000
0000000000000000 ffffffff81189bc8 ffffffff818d0000 0000000000000000
ffffffff81828907 ffffffff81769970 800000020ec78d80 ffffffff818c7b48
0000000000000001 0000000000000001 ffffffff818652b0 ffffffff81896268
ffffffff818c0000 800000020ec7fb40 800000020ec7fc58 ffffffff81684cac
0000000000000000 ffffffff8118ab50 0000000000000030 ffffffff81769970
0000000000000001 ffffffff81122a58 0000000000000000 0000000000000000 ...
Call Trace:
[<ffffffff81122a58>] show_stack+0x90/0xb0
[<ffffffff81684cac>] dump_stack+0xac/0xf0
[<ffffffff813f7050>] check_preemption_disabled+0x120/0x128
[<ffffffff818855e8>] pcibios_set_cache_line_size+0x10/0x70
[<ffffffff81100578>] do_one_initcall+0x48/0x140
[<ffffffff81865dc4>] kernel_init_freeable+0x194/0x24c
[<ffffffff8169c534>] kernel_init+0x14/0x118
[<ffffffff8111ca84>] ret_from_kernel_thread+0x14/0x1c
Fix this by using the cpu_*cache_line_size() macros instead. These
macros are the "proper" way to determine the CPU cache sizes.
This makes use of the newly added cpu_tcache_line_size.
Fixes: 1c3c5eab17 ("sched/core: Enable might_sleep() and smp_processor_id() checks early")
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Suggested-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
There exist macros to return the cache line size of the L1 dcache and L2
scache but there is currently no macro for the L3 tcache. Add this macro
which will be used by the following patch "MIPS: PCI: Fix
smp_processor_id() in preemptible"
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Maciej W. Rozycki <macro@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16871/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This series includes some mlx5 updates for both net-next and rdma trees.
From Saeed,
Core driver updates to allow selectively building the driver with
or without some large driver components, such as
- E-Switch (Ethernet SRIOV support).
- Multi-Physical Function Switch (MPFs) support.
For that we split E-Switch and MPFs functionalities into separate files.
From Erez,
Delay mlx5_core events when mlx5 interfaces, namely mlx5_ib, registration
is taking place and until it completes.
From Rabie,
Increase the maximum supported flow counters.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZiDoAAAoJEEg/ir3gV/o+594H/RH5kRwC719s/5YQFJXvGsVC
fjtj3UUJPLrWB8XBh7a4PRcxXPIHaFKJuY3MU7KHFIeZQFklJcit3njjpxDlUINo
F5S1LHBSYBkeMD/ksWBA8OLCBprNGN6WQ2tuFfAjZlQQ44zqv8LJmegoDtW9bGRy
aGAkjUmALEblQsq81y0BQwN2/8DA8HAywrs8L2dkH1LHwijoIeYMZFOtKugv1FbB
ABSKxcU7D/NYw6rsVdZG59fHFQ+eKOspDFqBZrUzfQ+zUU2hFFo96ovfXBfIqYCV
7BtJuKXu2LeGPzFLsuw4h1131iqFT1iSMy9fEhf/4OwaL/KPP/+Umy8vP/XfM+U=
=wCpd
-----END PGP SIGNATURE-----
Merge tag 'mlx5-shared-2017-08-07' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Saeed Mahameed says:
====================
mlx5-shared-2017-08-07
This series includes some mlx5 updates for both net-next and rdma trees.
From Saeed,
Core driver updates to allow selectively building the driver with
or without some large driver components, such as
- E-Switch (Ethernet SRIOV support).
- Multi-Physical Function Switch (MPFs) support.
For that we split E-Switch and MPFs functionalities into separate files.
From Erez,
Delay mlx5_core events when mlx5 interfaces, namely mlx5_ib, registration
is taking place and until it completes.
From Rabie,
Increase the maximum supported flow counters.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix a commit 3021773c7c ("MIPS: DEC: Avoid la pseudo-instruction in
delay slots") regression and remove assembly errors:
arch/mips/dec/int-handler.S: Assembler messages:
arch/mips/dec/int-handler.S:162: Error: Macro used $at after ".set noat"
arch/mips/dec/int-handler.S:163: Error: Macro used $at after ".set noat"
arch/mips/dec/int-handler.S:229: Error: Macro used $at after ".set noat"
arch/mips/dec/int-handler.S:230: Error: Macro used $at after ".set noat"
triggering with with the CPU_DADDI_WORKAROUNDS option set and the DADDIU
instruction. This is because with that option in place the instruction
becomes a macro, which expands to an LI/DADDU (or actually ADDIU/DADDU)
sequence that uses $at as a temporary register.
With CPU_DADDI_WORKAROUNDS we only support `-msym32' compilation though,
and this is already enforced in arch/mips/Makefile, so choose the 32-bit
expansion variant for the supported configurations and then replace the
64-bit variant with #error just in case.
Fixes: 3021773c7c ("MIPS: DEC: Avoid la pseudo-instruction in delay slots")
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # 4.8+
Patchwork: https://patchwork.linux-mips.org/patch/16893/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Extend clobber lists to include all GP registers.
Fixes: 0b523a85e1 ("MIPS: VDSO: Add implementation of gettimeofday() fallback")
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: Bo Hu <bohu@google.com>
Cc: Douglas Leung <douglas.leung@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Jin Qian <jinqian@google.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16879/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Commit 296e46db00 ("MIPS: Don't unnecessarily include kmalloc.h into
<asm/cache.h>.") claimed that the inclusion of the machine's kmalloc.h
from asm/cache.h is unnecessary, but this is not true.
Without including kmalloc.h we don't get a definition for
ARCH_DMA_MINALIGN, which means we no longer suitably align DMA. Further
to this the definition of ARCH_KMALLOC_MINALIGN provided by linux/slab.h
ends up being set to the alignment of an unsigned long long value rather
than to ARCH_DMA_MINALIGN, which means that buffers allocated using
kmalloc may no longer be safely aligned for use with DMA.
Fix this by re-adding the include of kmalloc.h in asm/cache.h. This
reverts commit 296e46db00 ("MIPS: Don't unnecessarily include
kmalloc.h into <asm/cache.h>.")
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: 296e46db00 ("MIPS: Don't unnecessarily include kmalloc.h into <asm/cache.h>.")
Cc: linux-mips@linux-mips.org
Cc: stable <stable@vger.kernel.org> # v4.12+
Patchwork: https://patchwork.linux-mips.org/patch/16895/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Fix build error when CONFIG_SMP is turned off:
CC [M] arch/mips/cavium-octeon/octeon-usb.o
arch/mips/cavium-octeon/octeon-usb.c: In function
‘dwc3_octeon_device_init’:
arch/mips/cavium-octeon/octeon-usb.c:540:4: error: implicit declaration
of function ‘devm_iounmap’ [-Werror=implicit-function-declaration]
devm_iounmap(&pdev->dev, base);
Signed-off-by: Steven J. Hill <steven.hill@cavium.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Tested-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16907/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Commit "MIPS: Octeon: Remove unused L2C types and macros." broke the
the EDAC driver. Bring back 'cvmx-l2d-defs.h' file and the missing
types for L2C. Fixes: 15f6847923 ("MIPS: Octeon: Remove unused L2C
types and macros.")
Fixes: 15f6847923 ("MIPS: Octeon: Remove unused L2C types and macros.")
Signed-off-by: Steven J. Hill <steven.hill@cavium.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.12+
Patchwork: https://patchwork.linux-mips.org/patch/16906/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
While testing cpu hoptlug (cpu down and up in loops) on kernel 4.4, it was
observed that occasionally check for cpu online will fail in kernel/cpu.c,
_cpu_up:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/tree/kernel/cpu.c?h=v4.4.79#n485
518 /* Arch-specific enabling code. */
519 ret = __cpu_up(cpu, idle);
520
521 if (ret != 0)
522 goto out_notify;
523 BUG_ON(!cpu_online(cpu));
Reason is race between start_secondary and _cpu_up. cpu_callin_map is set
before cpu_online_mask. In __cpu_up, cpu_callin_map is waited for, but cpu
online mask is not, resulting in race in which secondary processor started
and set cpu_callin_map, but not yet set the online mask,resulting in above
BUG being hit.
Upstream differs in the area. cpu_online check is in bringup_wait_for_ap,
which is after cpu reached AP_ONLINE_IDLE,where secondary passed its start
function. Nonetheless, fix makes start_secondary safe and not depending on
other locks throughout the code. It protects as well against cpu_online
checks put in between sometimes in the future.
Fix this by moving completion after all flags are set.
Signed-off-by: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nokia.com>
Cc: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16925/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Pull MIPS fixes from Ralf Baechle:
"This fixes two build issues for ralink platforms, both due to missing
#includes which used to be included indirectly via other headers"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: ralink: mt7620: Add missing header
MIPS: ralink: Fix build error due to missing header
Inexplicably, commit f381bf6d82 ("MIPS: Add support for eBPF JIT.")
lost a file somewhere on its path to Linus' tree. Add back the
missing ebpf_jit.c so that we can build with CONFIG_BPF_JIT selected.
This version of ebpf_jit.c is identical to the original except for two
minor change need to resolve conflicts with changes merged from the
BPF branch:
A) Set prog->jited_len = image_size;
B) Use BPF_TAIL_CALL instead of BPF_CALL | BPF_X
Fixes: f381bf6d82 ("MIPS: Add support for eBPF JIT.")
Signed-off-by: David Daney <david.daney@cavium.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The send call ignores unknown flags. Legacy applications may already
unwittingly pass MSG_ZEROCOPY. Continue to ignore this flag unless a
socket opts in to zerocopy.
Introduce socket option SO_ZEROCOPY to enable MSG_ZEROCOPY processing.
Processes can also query this socket option to detect kernel support
for the feature. Older kernels will return ENOPROTOOPT.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The pci_fixup_irqs() function allocates IRQs for all PCI devices present in
a system; those PCI devices possibly belong to different PCI bus trees (and
possibly rooted at different host bridges) and may well be enabled (ie
probed and bound to a driver) by the time pci_fixup_irqs() is called when
probing a given host bridge driver.
Furthermore, current kernel code relying on pci_fixup_irqs() to assign
legacy PCI IRQs to devices does not work at all for hotplugged devices in
that the code carrying out the IRQ fixup is called at host bridge driver
probe time, which just cannot take into account devices hotplugged after
the system has booted.
The introduction of map/swizzle function hooks in struct pci_host_bridge
allows us to define per-bridge map/swizzle functions, that can be used at
device probe time in PCI core code to allocate IRQs for a given device
(through pci_assign_irq()).
Convert PCI host bridge initialization code to the
pci_scan_root_bus_bridge() API (that allows to pass a struct
pci_host_bridge with initialized map/swizzle pointers) and remove the
pci_fixup_irqs() call from arch code.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@imgtec.com>
If pci_scan_root_bus() fails (ie returns NULL) pcibios_scan_bus() must
return immediately since the struct pci_bus pointer it returns is not valid
and cannot be used.
Move code checking the pci_scan_root_bus() return value to reinstate proper
pcibios_scanbus() error path behaviour.
Fixes: 88555b4819 ("MIPS: PCI: Support for CONFIG_PCI_DOMAINS_GENERIC")
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@imgtec.com>
- split the global dma coherent pool from the per-device pool.
This fixes a regression in the earlier 4.13 pull requests where the
global pool would override a per-device CMA pool. (Vladimir Murzin).
-----BEGIN PGP SIGNATURE-----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=fJWP
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-4.13-2' of git://git.infradead.org/users/hch/dma-mapping
Pull dma mapping fixes from Christoph Hellwig:
"split the global dma coherent pool from the per-device pool.
This fixes a regression in the earlier 4.13 pull requests where the
global pool would override a per-device CMA pool (Vladimir Murzin)"
* tag 'dma-mapping-4.13-2' of git://git.infradead.org/users/hch/dma-mapping:
ARM: NOMMU: Wire-up default DMA interface
dma-coherent: introduce interface for default DMA pool
struct siginfo is a union and the kernel since 2.4 has been hiding a union
tag in the high 16bits of si_code using the values:
__SI_KILL
__SI_TIMER
__SI_POLL
__SI_FAULT
__SI_CHLD
__SI_RT
__SI_MESGQ
__SI_SYS
While this looks plausible on the surface, in practice this situation has
not worked well.
- Injected positive signals are not copied to user space properly
unless they have these magic high bits set.
- Injected positive signals are not reported properly by signalfd
unless they have these magic high bits set.
- These kernel internal values leaked to userspace via ptrace_peek_siginfo
- It was possible to inject these kernel internal values and cause the
the kernel to misbehave.
- Kernel developers got confused and expected these kernel internal values
in userspace in kernel self tests.
- Kernel developers got confused and set si_code to __SI_FAULT which
is SI_USER in userspace which causes userspace to think an ordinary user
sent the signal and that it was not kernel generated.
- The values make it impossible to reorganize the code to transform
siginfo_copy_to_user into a plain copy_to_user. As si_code must
be massaged before being passed to userspace.
So remove these kernel internal si codes and make the kernel code simpler
and more maintainable.
To replace these kernel internal magic si_codes introduce the helper
function siginfo_layout, that takes a signal number and an si_code and
computes which union member of siginfo is being used. Have
siginfo_layout return an enumeration so that gcc will have enough
information to warn if a switch statement does not handle all of union
members.
A couple of architectures have a messed up ABI that defines signal
specific duplications of SI_USER which causes more special cases in
siginfo_layout than I would like. The good news is only problem
architectures pay the cost.
Update all of the code that used the previous magic __SI_ values to
use the new SIL_ values and to call siginfo_layout to get those
values. Escept where not all of the cases are handled remove the
defaults in the switch statements so that if a new case is missed in
the future the lack will show up at compile time.
Modify the code that copies siginfo si_code to userspace to just copy
the value and not cast si_code to a short first. The high bits are no
longer used to hold a magic union member.
Fixup the siginfo header files to stop including the __SI_ values in
their constants and for the headers that were missing it to properly
update the number of si_codes for each signal type.
The fixes to copy_siginfo_from_user32 implementations has the
interesting property that several of them perviously should never have
worked as the __SI_ values they depended up where kernel internal.
With that dependency gone those implementations should work much
better.
The idea of not passing the __SI_ values out to userspace and then
not reinserting them has been tested with criu and criu worked without
changes.
Ref: 2.4.0-test1
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Christoph noticed [1] that default DMA pool in current form overload
the DMA coherent infrastructure. In reply, Robin suggested [2] to
split the per-device vs. global pool interfaces, so allocation/release
from default DMA pool is driven by dma ops implementation.
This patch implements Robin's idea and provide interface to
allocate/release/mmap the default (aka global) DMA pool.
To make it clear that existing *_from_coherent routines work on
per-device pool rename them to *_from_dev_coherent.
[1] https://lkml.org/lkml/2017/7/7/370
[2] https://lkml.org/lkml/2017/7/7/431
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Andras Szemzo <sza@esh.hu>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Setting si_code to __SI_FAULT results in a userspace seeing
an si_code of 0. This is the same si_code as SI_USER. Posix
and common sense requires that SI_USER not be a signal specific
si_code. As such this use of 0 for the si_code is a pretty
horribly broken ABI.
This use of of __SI_FAULT is only a decade old. Which compared
to the other pieces of kernel code that has made this mistake
is almost yesterday.
This is probably worth fixing but I don't know mips well enough
to know what si_code to would be the proper one to use.
Cc: Ralf Baechle <ralf@linux-mips.org>
Ref: 948a34cf39 ("[MIPS] Maintain si_code field properly for FP exceptions")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Fix a build error caused by not including <linux/bug.h>.
The following compilation errors are caused by the missing header:
arch/mips/ralink/mt7620.c: In function ‘mt7620_get_cpu_pll_rate’:
arch/mips/ralink/mt7620.c:431:2: error: implicit declaration of function ‘WARN_ON’ [-Werror=implicit-function-declaration]
WARN_ON(div >= ARRAY_SIZE(mt7620_clk_divider));
^
arch/mips/ralink/mt7620.c: In function ‘mt7620_get_sys_rate’:
arch/mips/ralink/mt7620.c:500:2: error: implicit declaration of function ‘WARN’ [-Werror=implicit-function-declaration]
if (WARN(!div, "invalid divider for OCP ratio %u", ocp_ratio))
^
arch/mips/ralink/mt7620.c: In function ‘mt7620_dram_init’:
arch/mips/ralink/mt7620.c:619:3: error: implicit declaration of function ‘BUG’ [-Werror=implicit-function-declaration]
BUG();
^
cc1: some warnings being treated as errors
scripts/Makefile.build:302: recipe for target 'arch/mips/ralink/mt7620.o' failed
Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16781/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Previously, <linux/module.h> was included before ralink_regs.h in all
ralink files - leading to <linux/io.h> being implicitly included.
After commit 26dd3e4ff9 ("MIPS: Audit and remove any unnecessary
uses of module.h") removed the inclusion of module.h from multiple
places, some ralink platforms failed to build with the following error:
In file included from arch/mips/ralink/mt7620.c:17:0:
./arch/mips/include/asm/mach-ralink/ralink_regs.h: In function ‘rt_sysc_w32’:
./arch/mips/include/asm/mach-ralink/ralink_regs.h:38:2: error: implicit declaration of function ‘__raw_writel’ [-Werror=implicit-function-declaration]
__raw_writel(val, rt_sysc_membase + reg);
^
./arch/mips/include/asm/mach-ralink/ralink_regs.h: In function ‘rt_sysc_r32’:
./arch/mips/include/asm/mach-ralink/ralink_regs.h:43:2: error: implicit declaration of function ‘__raw_readl’ [-Werror=implicit-function-declaration]
return __raw_readl(rt_sysc_membase + reg);
Fix this by including <linux/io.h>.
Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com>
Fixes: 26dd3e4ff9 ("MIPS: Audit and remove any unnecessary uses of module.h")
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: <stable@vger.kernel.org> #4.11+
Patchwork: https://patchwork.linux-mips.org/patch/16780/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This ioctl does nothing to justify an _IOC_READ or _IOC_WRITE flag
because it doesn't copy anything from/to userspace to access the
argument.
Fixes: 54ebbfb160 ("tty: add TIOCGPTPEER ioctl")
Signed-off-by: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Acked-by: Aleksa Sarai <asarai@suse.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull uacess-unaligned removal from Al Viro:
"That stuff had just one user, and an exotic one, at that - binfmt_flat
on arm and m68k"
* 'work.uaccess-unaligned' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
kill {__,}{get,put}_user_unaligned()
binfmt_flat: flat_{get,put}_addr_from_rp() should be able to fail
Pull MIPS updates from Ralf Baechle:
"Boston platform support:
- Document DT bindings
- Add CLK driver for board clocks
CM:
- Avoid per-core locking with CM3 & higher
- WARN on attempt to lock invalid VP, not BUG
CPS:
- Select CONFIG_SYS_SUPPORTS_SCHED_SMT for MIPSr6
- Prevent multi-core with dcache aliasing
- Handle cores not powering down more gracefully
- Handle spurious VP starts more gracefully
DSP:
- Add lwx & lhx missaligned access support
eBPF:
- Add MIPS support along with many supporting change to add the
required infrastructure
Generic arch code:
- Misc sysmips MIPS_ATOMIC_SET fixes
- Drop duplicate HAVE_SYSCALL_TRACEPOINTS
- Negate error syscall return in trace
- Correct forced syscall errors
- Traced negative syscalls should return -ENOSYS
- Allow samples/bpf/tracex5 to access syscall arguments for sane
traces
- Cleanup from old Kconfig options in defconfigs
- Fix PREF instruction usage by memcpy for MIPS R6
- Fix various special cases in the FPU eulation
- Fix some special cases in MIPS16e2 support
- Fix MIPS I ISA /proc/cpuinfo reporting
- Sort MIPS Kconfig alphabetically
- Fix minimum alignment requirement of IRQ stack as required by
ABI / GCC
- Fix special cases in the module loader
- Perform post-DMA cache flushes on systems with MAARs
- Probe the I6500 CPU
- Cleanup cmpxchg and add support for 1 and 2 byte operations
- Use queued read/write locks (qrwlock)
- Use queued spinlocks (qspinlock)
- Add CPU shared FTLB feature detection
- Handle tlbex-tlbp race condition
- Allow storing pgd in C0_CONTEXT for MIPSr6
- Use current_cpu_type() in m4kc_tlbp_war()
- Support Boston in the generic kernel
Generic platform:
- yamon-dt: Pull YAMON DT shim code out of SEAD-3 board
- yamon-dt: Support > 256MB of RAM
- yamon-dt: Use serial* rather than uart* aliases
- Abstract FDT fixup application
- Set RTC_ALWAYS_BCD to 0
- Add a MAINTAINERS entry
core kernel:
- qspinlock.c: include linux/prefetch.h
Loongson 3:
- Add support
Perf:
- Add I6500 support
SEAD-3:
- Remove GIC timer from DT
- Set interrupt-parent per-device, not at root node
- Fix GIC interrupt specifiers
SMP:
- Skip IPI setup if we only have a single CPU
VDSO:
- Make comment match reality
- Improvements to time code in VDSO"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (86 commits)
locking/qspinlock: Include linux/prefetch.h
MIPS: Fix MIPS I ISA /proc/cpuinfo reporting
MIPS: Fix minimum alignment requirement of IRQ stack
MIPS: generic: Support MIPS Boston development boards
MIPS: DTS: img: Don't attempt to build-in all .dtb files
clk: boston: Add a driver for MIPS Boston board clocks
dt-bindings: Document img,boston-clock binding
MIPS: Traced negative syscalls should return -ENOSYS
MIPS: Correct forced syscall errors
MIPS: Negate error syscall return in trace
MIPS: Drop duplicate HAVE_SYSCALL_TRACEPOINTS select
MIPS16e2: Provide feature overrides for non-MIPS16 systems
MIPS: MIPS16e2: Report ASE presence in /proc/cpuinfo
MIPS: MIPS16e2: Subdecode extended LWSP/SWSP instructions
MIPS: MIPS16e2: Identify ASE presence
MIPS: VDSO: Fix a mismatch between comment and preprocessor constant
MIPS: VDSO: Add implementation of gettimeofday() fallback
MIPS: VDSO: Add implementation of clock_gettime() fallback
MIPS: VDSO: Fix conversions in do_monotonic()/do_monotonic_coarse()
MIPS: Use current_cpu_type() in m4kc_tlbp_war()
...
Patch series "mm: give __GFP_REPEAT a better semantic".
The main motivation for the change is that the current implementation of
__GFP_REPEAT is not very much useful.
The documentation says:
* __GFP_REPEAT: Try hard to allocate the memory, but the allocation attempt
* _might_ fail. This depends upon the particular VM implementation.
It just fails to mention that this is true only for large (costly) high
order which has been the case since the flag was introduced. A similar
semantic would be really helpful for smal orders as well, though,
because we have places where a failure with a specific fallback error
handling is preferred to a potential endless loop inside the page
allocator.
The earlier cleanup dropped __GFP_REPEAT usage for low (!costly) order
users so only those which might use larger orders have stayed. One new
user added in the meantime is addressed in patch 1.
Let's rename the flag to something more verbose and use it for existing
users. Semantic for those will not change. Then implement low
(!costly) orders failure path which is hit after the page allocator is
about to invoke the oom killer. With that we have a good counterpart
for __GFP_NORETRY and finally can tell try as hard as possible without
the OOM killer.
Xfs code already has an existing annotation for allocations which are
allowed to fail and we can trivially map them to the new gfp flag
because it will provide the semantic KM_MAYFAIL wants. Christoph didn't
consider the new flag really necessary but didn't respond to the OOM
killer aspect of the change so I have kept the patch. If this is still
seen as not really needed I can drop the patch.
kvmalloc will allow also !costly high order allocations to retry hard
before falling back to the vmalloc.
drm/i915 asked for the new semantic explicitly.
Memory migration code, especially for the memory hotplug, should back
off rather than invoking the OOM killer as well.
This patch (of 6):
Commit 3377e227af ("MIPS: Add 48-bit VA space (and 4-level page
tables) for 4K pages.") has added a new __GFP_REPEAT user but using this
flag doesn't really make any sense for order-0 request which is the case
here because PUD_ORDER is 0. __GFP_REPEAT has historically effect only
on allocation requests with order > PAGE_ALLOC_COSTLY_ORDER.
This doesn't introduce any functional change. This is a preparatory
patch for later work which renames the flag and redefines its semantic.
Link: http://lkml.kernel.org/r/20170623085345.11304-2-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alex Belits <alex.belits@cavium.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: NeilBrown <neilb@suse.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Correct a commit 515a6393db ("MIPS: kernel: proc: Add MIPS R6 support
to /proc/cpuinfo") regression that caused MIPS I systems to show no ISA
levels supported in /proc/cpuinfo, e.g.:
system type : Digital DECstation 2100/3100
machine : Unknown
processor : 0
cpu model : R3000 V2.0 FPU V2.0
BogoMIPS : 10.69
wait instruction : no
microsecond timers : no
tlb_entries : 64
extra interrupt vector : no
hardware watchpoint : no
isa :
ASEs implemented :
shadow register sets : 1
kscratch registers : 0
package : 0
core : 0
VCED exceptions : not available
VCEI exceptions : not available
and similarly exclude `mips1' from the ISA list for any processors below
MIPSr1. This is because the condition to show `mips1' on has been made
`cpu_has_mips_r1' rather than newly-introduced `cpu_has_mips_1'. Use
the correct condition then.
Fixes: 515a6393db ("MIPS: kernel: proc: Add MIPS R6 support to /proc/cpuinfo")
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # 3.19+
Patchwork: https://patchwork.linux-mips.org/patch/16758/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Commit db8466c581 ("MIPS: IRQ Stack: Unwind IRQ stack onto task
stack") erroneously set the initial stack pointer of the IRQ stack to a
value with a 4 byte alignment. The MIPS32 ABI requires that the minimum
stack alignment is 8 byte, and the MIPS64 ABIs(n32/n64) require 16 byte
minimum alignment. Fix IRQ_STACK_START such that it leaves space for the
dummy stack frame (containing interrupted task kernel stack pointer)
while also meeting minimum alignment requirements.
Fixes: db8466c581 ("MIPS: IRQ Stack: Unwind IRQ stack onto task stack")
Reported-by: Darius Ivanauskas <dasilt@yahoo.com>
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: Jason A. Donenfeld <jason@zx2c4.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16760/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Add support for the MIPS Boston development board to generic kernels,
which essentially amounts to:
- Adding the device tree source for the MIPS Boston board.
- Adding a Kconfig fragment which enables the appropriate drivers for
the MIPS Boston board.
With these changes in place generic kernels will support the board by
default, and kernels with only the drivers needed for Boston enabled can
be configured by setting BOARDS=boston during configuration. For
example:
$ make ARCH=mips 64r6el_defconfig BOARDS=boston
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16485/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
When building a FIT image we may want the kernel to build multiple .dtb
files, but we don't want to build them all into the kernel binary as
object files since they'll instead be included in the FIT image.
Commit daa10170da ("MIPS: DTS: img: add device tree for Marduk board")
however created arch/mips/boot/dts/img/Makefile with a line that builds
any enabled .dtb files into the kernel. Remove this & build the
pistachio object specifically, in preparation for adding .dtb targets
which we don't want to build into the kernel.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16484/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
If a negative system call number is used when system call tracing is
enabled, syscall_trace_enter() will return that negative system call
number without having written the return value and error flag into the
pt_regs.
The caller then treats it as a cancelled system call and assumes that
the return value and error flag are already written, leaving the
negative system call number in the return register ($v0), and the 4th
system call argument in the error register ($a3).
Add a special case to detect this at the end of syscall_trace_enter(),
to set the return value to error -ENOSYS when this happens.
Fixes: d218af7849 ("MIPS: scall: Always run the seccomp syscall filters")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16653/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
When the system call return value is forced to be an error (for example
due to SECCOMP_RET_ERRNO), syscall_set_return_value() puts the error
code in the return register $v0 and -1 in the error register $a3.
However normally executed system calls put 1 in the error register
rather than -1, so fix syscall_set_return_value() to be consistent with
that.
I don't anticipate that anything would have been broken by this, since
the most natural way to check the error register on MIPS would be a
conditional branch if error register is [not] equal to zero (bnez or
beqz).
Fixes: 1d7bf993e0 ("MIPS: ftrace: Add support for syscall tracepoints.")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16652/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The sys_exit trace event takes a single return value for the system
call, which MIPS passes the value of the $v0 (result) register, however
MIPS returns positive error codes in $v0 with $a3 specifying that $v0
contains an error code. As a result erroring system calls are traced
returning positive error numbers that can't always be distinguished from
success.
Use regs_return_value() to negate the error code if $a3 is set.
Fixes: 1d7bf993e0 ("MIPS: ftrace: Add support for syscall tracepoints.")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.13+
Patchwork: https://patchwork.linux-mips.org/patch/16651/
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
MIPS selects HAVE_SYSCALL_TRACEPOINTS twice. The first was added back in
v3.13 by commit 2d7bf993e073 ("MIPS: ftrace: Add support for syscall
tracepoints."), but then a second redundant one was added in v4.2 by
commit fb59e394c3 ("MIPS: ftrace: Enable support for syscall
tracepoints.").
Drop the duplicate select.
Fixes: fb59e394c3 ("MIPS: ftrace: Enable support for syscall tracepoints.")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16654/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Hardcode the absence of the MIPS16e2 ASE for all the systems that do so
for the MIPS16 ASE already, providing for code to be optimized away.
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16097/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Only now that both feature determination and unaligned emulation is in
place add reporting to /proc/cpuinfo, so that the presence of "mips16e2"
there not only indicates our recognition of the hardware feature, but
correct unaligned emulation as well.
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16757/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Core:
- Export add/remove for lookup tables so that modules can export GPIO
descriptor tables.
- Handle GPIO sleep states: it is now possible to flag that a GPIO line
may loose its state during suspend/resume of the system to save
power. This is used in the Wolfson Micro Arizona driver.
- ACPI-based GPIO was tightened up a lot around the edges.
- Use bitmap_fill() to speed up a loop.
New drivers:
- Exar XRA1403 SPI-based GPIO.
- MVEBU driver now supports Armada 7K and 8K.
- LP87565 PMIC GPIO.
- Renesas R-CAR R8A7743 (RZ/G1M).
- The new IOT2040 8250 serial/GPIO also comes in through this
changeset.
Substantial driver changes:
- Seriously fix the Exar 8250 GPIO portions to work.
- The MCP23S08 was moved out to a pin control driver.
- Convert MEVEBU to use regmap for register access.
- Drop Vulcan support from the Broadcom driver.
- Serious cleanup and improvement of the mockup driver, giving us a
better test coverage.
Misc:
- Lots of janitorial clean up.
- A bunch of documentation fixes.
-----BEGIN PGP SIGNATURE-----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=TpW1
-----END PGP SIGNATURE-----
Merge tag 'gpio-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for the v4.13 series.
Some administrativa:
I have a slew of 8250 serial patches and the new IOT2040 serial+GPIO
driver coming in through this tree, along with a whole bunch of Exar
8250 fixes. These are ACKed by Greg and also hit drivers/platform/*
where they are ACKed by Andy Shevchenko.
Speaking about drivers/platform/* there is also a bunch of ACPI stuff
coming through that route, again ACKed by Andy.
The MCP23S08 changes are coming in here as well. You already have the
commits in your tree, so this is just a result of sharing an immutable
branch between pin control and GPIO.
Core:
- Export add/remove for lookup tables so that modules can export GPIO
descriptor tables.
- Handle GPIO sleep states: it is now possible to flag that a GPIO
line may loose its state during suspend/resume of the system to
save power. This is used in the Wolfson Micro Arizona driver.
- ACPI-based GPIO was tightened up a lot around the edges.
- Use bitmap_fill() to speed up a loop.
New drivers:
- Exar XRA1403 SPI-based GPIO.
- MVEBU driver now supports Armada 7K and 8K.
- LP87565 PMIC GPIO.
- Renesas R-CAR R8A7743 (RZ/G1M).
- The new IOT2040 8250 serial/GPIO also comes in through this
changeset.
Substantial driver changes:
- Seriously fix the Exar 8250 GPIO portions to work.
- The MCP23S08 was moved out to a pin control driver.
- Convert MEVEBU to use regmap for register access.
- Drop Vulcan support from the Broadcom driver.
- Serious cleanup and improvement of the mockup driver, giving us a
better test coverage.
Misc:
- Lots of janitorial clean up.
- A bunch of documentation fixes"
* tag 'gpio-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (70 commits)
serial: exar: Add support for IOT2040 device
gpio-exar/8250-exar: Make set of exported GPIOs configurable
platform: Accept const properties
serial: exar: Factor out platform hooks
gpio-exar/8250-exar: Rearrange gpiochip parenthood
gpio: exar: Fix iomap request
gpio-exar/8250-exar: Do not even instantiate a GPIO device for Commtech cards
serial: uapi: Add support for bus termination
gpio: rcar: Add R8A7743 (RZ/G1M) support
gpio: gpio-wcove: Fix GPIO control register offset calculation
gpio: lp87565: Add support for GPIO
gpio: dwapb: fix missing first irq for edgeboth irq type
MAINTAINERS: Take maintainership for GPIO ACPI support
gpio: exar: Fix reading of directions and values
gpio: exar: Allocate resources on behalf of the platform device
gpio-exar/8250-exar: Fix passing in of parent PCI device
gpio: mockup: use devm_kcalloc() where applicable
gpio: mockup: add myself as author
gpio: mockup: improve the error message
gpio: mockup: don't return magic numbers from probe()
...
some new clk drivers and updates for old ones. The diff is pretty
spread out across a handful of different SoC clk drivers for Broadcom, TI,
Qualcomm, Renesas, Rockchip, Samsung, and Allwinner, mostly due to the
introduction of new drivers.
Core:
- New clk bulk get APIs
- Clk divider APIs gained the ability to consider a different parent than
the current one
New Drivers:
- Renesas r8a779{0,1,2,4} CPG/MSSR
- TI Keystone SCI firmware controlled clks and OMAP4 clkctrl
- Qualcomm IPQ8074 SoCs
- Cortina Systems Gemini (SL3516/CS3516)
- Rockchip rk3128 SoCs
- Allwinner A83T clk control units
- Broadcom Stingray SoCs
- CPU clks for Mediatek MT8173/MT2701/MT7623 SoCs
Removed Drivers:
- Old non-DT version of the Realview clk driver
Updates:
- Renesas Kconfig/Makefile cleanups
- Amlogic CEC EE clk support
- Improved Armada 7K/8K cp110 clk support
- Rockchip clk id exposing, critical clk markings
- Samsung converted to clk_hw registration APIs
- Fixes for Samsung exynos5420 audio clks
- USB2 clks for Hisilicon hi3798cv200 SoC and video/camera clks for hi3660
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=Yar+
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This time we've got one core change to introduce a bulk clk_get API,
some new clk drivers and updates for old ones. The diff is pretty
spread out across a handful of different SoC clk drivers for Broadcom,
TI, Qualcomm, Renesas, Rockchip, Samsung, and Allwinner, mostly due to
the introduction of new drivers.
Core:
- New clk bulk get APIs
- Clk divider APIs gained the ability to consider a different parent
than the current one
New Drivers:
- Renesas r8a779{0,1,2,4} CPG/MSSR
- TI Keystone SCI firmware controlled clks and OMAP4 clkctrl
- Qualcomm IPQ8074 SoCs
- Cortina Systems Gemini (SL3516/CS3516)
- Rockchip rk3128 SoCs
- Allwinner A83T clk control units
- Broadcom Stingray SoCs
- CPU clks for Mediatek MT8173/MT2701/MT7623 SoCs
Removed Drivers:
- Old non-DT version of the Realview clk driver
Updates:
- Renesas Kconfig/Makefile cleanups
- Amlogic CEC EE clk support
- Improved Armada 7K/8K cp110 clk support
- Rockchip clk id exposing, critical clk markings
- Samsung converted to clk_hw registration APIs
- Fixes for Samsung exynos5420 audio clks
- USB2 clks for Hisilicon hi3798cv200 SoC and video/camera clks for
hi3660"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (147 commits)
clk: gemini: Read status before using the value
clk: scpi: error when clock fails to register
clk: at91: Add sama5d2 suspend/resume
gpio: dt-bindings: Add documentation for gpio controllers on Armada 7K/8K
clk: keystone: TI_SCI_PROTOCOL is needed for clk driver
clk: samsung: audss: Fix silent hang on Exynos4412 due to disabled EPLL
clk: uniphier: provide NAND controller clock rate
clk: hisilicon: add usb2 clocks for hi3798cv200 SoC
clk: Add Gemini SoC clock controller
clk: iproc: Remove __init marking on iproc_pll_clk_setup()
clk: bcm: Add clocks for Stingray SOC
dt-bindings: clk: Extend binding doc for Stingray SOC
clk: mediatek: export cpu multiplexer clock for MT8173 SoCs
clk: mediatek: export cpu multiplexer clock for MT2701/MT7623 SoCs
clk: mediatek: add missing cpu mux causing Mediatek cpufreq can't work
clk: renesas: cpg-mssr: Use of_device_get_match_data() helper
clk: hi6220: add acpu clock
clk: zx296718: export I2S mux clocks
clk: imx7d: create clocks behind rawnand clock gate
clk: hi3660: Set PPLL2 to 2880M
...
Merge misc updates from Andrew Morton:
- a few hotfixes
- various misc updates
- ocfs2 updates
- most of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (108 commits)
mm, memory_hotplug: move movable_node to the hotplug proper
mm, memory_hotplug: drop CONFIG_MOVABLE_NODE
mm, memory_hotplug: drop artificial restriction on online/offline
mm: memcontrol: account slab stats per lruvec
mm: memcontrol: per-lruvec stats infrastructure
mm: memcontrol: use generic mod_memcg_page_state for kmem pages
mm: memcontrol: use the node-native slab memory counters
mm: vmstat: move slab statistics from zone to node counters
mm/zswap.c: delete an error message for a failed memory allocation in zswap_dstmem_prepare()
mm/zswap.c: improve a size determination in zswap_frontswap_init()
mm/zswap.c: delete an error message for a failed memory allocation in zswap_pool_create()
mm/swapfile.c: sort swap entries before free
mm/oom_kill: count global and memory cgroup oom kills
mm: per-cgroup memory reclaim stats
mm: kmemleak: treat vm_struct as alternative reference to vmalloc'ed objects
mm: kmemleak: factor object reference updating out of scan_block()
mm: kmemleak: slightly reduce the size of some structures on 64-bit architectures
mm, mempolicy: don't check cpuset seqlock where it doesn't matter
mm, cpuset: always use seqlock when changing task's nodemask
mm, mempolicy: simplify rebinding mempolicies when updating cpusets
...
Pull user access str* updates from Al Viro:
"uaccess str...() dead code removal"
* 'uaccess.strlen' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
s390 keyboard.c: don't open-code strndup_user()
mips: get rid of unused __strnlen_user()
get rid of unused __strncpy_from_user() instances
kill strlen_user()
Pull misc compat stuff updates from Al Viro:
"This part is basically untangling various compat stuff. Compat
syscalls moved to their native counterparts, getting rid of quite a
bit of double-copying and/or set_fs() uses. A lot of field-by-field
copyin/copyout killed off.
- kernel/compat.c is much closer to containing just the
copyin/copyout of compat structs. Not all compat syscalls are gone
from it yet, but it's getting there.
- ipc/compat_mq.c killed off completely.
- block/compat_ioctl.c cleaned up; floppy compat ioctls moved to
drivers/block/floppy.c where they belong. Yes, there are several
drivers that implement some of the same ioctls. Some are m68k and
one is 32bit-only pmac. drivers/block/floppy.c is the only one in
that bunch that can be built on biarch"
* 'misc.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
mqueue: move compat syscalls to native ones
usbdevfs: get rid of field-by-field copyin
compat_hdio_ioctl: get rid of set_fs()
take floppy compat ioctls to sodding floppy.c
ipmi: get rid of field-by-field __get_user()
ipmi: get COMPAT_IPMICTL_RECEIVE_MSG in sync with the native one
rt_sigtimedwait(): move compat to native
select: switch compat_{get,put}_fd_set() to compat_{get,put}_bitmap()
put_compat_rusage(): switch to copy_to_user()
sigpending(): move compat to native
getrlimit()/setrlimit(): move compat to native
times(2): move compat to native
compat_{get,put}_bitmap(): use unsafe_{get,put}_user()
fb_get_fscreeninfo(): don't bother with do_fb_ioctl()
do_sigaltstack(): lift copying to/from userland into callers
take compat_sys_old_getrlimit() to native syscall
trim __ARCH_WANT_SYS_OLD_GETRLIMIT
In this new subsystem we'll try to properly maintain all the generic
code related to dma-mapping, and will further consolidate arch code
into common helpers.
This pull request contains:
- removal of the DMA_ERROR_CODE macro, replacing it with calls
to ->mapping_error so that the dma_map_ops instances are
more self contained and can be shared across architectures (me)
- removal of the ->set_dma_mask method, which duplicates the
->dma_capable one in terms of functionality, but requires more
duplicate code.
- various updates for the coherent dma pool and related arm code
(Vladimir)
- various smaller cleanups (me)
-----BEGIN PGP SIGNATURE-----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=0Fso
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-4.13' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping infrastructure from Christoph Hellwig:
"This is the first pull request for the new dma-mapping subsystem
In this new subsystem we'll try to properly maintain all the generic
code related to dma-mapping, and will further consolidate arch code
into common helpers.
This pull request contains:
- removal of the DMA_ERROR_CODE macro, replacing it with calls to
->mapping_error so that the dma_map_ops instances are more self
contained and can be shared across architectures (me)
- removal of the ->set_dma_mask method, which duplicates the
->dma_capable one in terms of functionality, but requires more
duplicate code.
- various updates for the coherent dma pool and related arm code
(Vladimir)
- various smaller cleanups (me)"
* tag 'dma-mapping-4.13' of git://git.infradead.org/users/hch/dma-mapping: (56 commits)
ARM: dma-mapping: Remove traces of NOMMU code
ARM: NOMMU: Set ARM_DMA_MEM_BUFFERABLE for M-class cpus
ARM: NOMMU: Introduce dma operations for noMMU
drivers: dma-mapping: allow dma_common_mmap() for NOMMU
drivers: dma-coherent: Introduce default DMA pool
drivers: dma-coherent: Account dma_pfn_offset when used with device tree
dma: Take into account dma_pfn_offset
dma-mapping: replace dmam_alloc_noncoherent with dmam_alloc_attrs
dma-mapping: remove dmam_free_noncoherent
crypto: qat - avoid an uninitialized variable warning
au1100fb: remove a bogus dma_free_nonconsistent call
MAINTAINERS: add entry for dma mapping helpers
powerpc: merge __dma_set_mask into dma_set_mask
dma-mapping: remove the set_dma_mask method
powerpc/cell: use the dma_supported method for ops switching
powerpc/cell: clean up fixed mapping dma_ops initialization
tile: remove dma_supported and mapping_error methods
xen-swiotlb: remove xen_swiotlb_set_dma_mask
arm: implement ->dma_supported instead of ->set_dma_mask
mips/loongson64: implement ->dma_supported instead of ->set_dma_mask
...
- Better machine check handling for HV KVM
- Ability to support guests with threads=2, 4 or 8 on POWER9
- Fix for a race that could cause delayed recognition of signals
- Fix for a bug where POWER9 guests could sleep with interrupts pending.
ARM:
- VCPU request overhaul
- allow timer and PMU to have their interrupt number selected from userspace
- workaround for Cavium erratum 30115
- handling of memory poisonning
- the usual crop of fixes and cleanups
s390:
- initial machine check forwarding
- migration support for the CMMA page hinting information
- cleanups and fixes
x86:
- nested VMX bugfixes and improvements
- more reliable NMI window detection on AMD
- APIC timer optimizations
Generic:
- VCPU request overhaul + documentation of common code patterns
- kvm_stat improvements
There is a small conflict in arch/s390 due to an arch-wide field rename.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJZW4XTAAoJEL/70l94x66DkhMH/izpk54KI17PtyQ9VYI2sYeZ
BWK6Kl886g3ij4pFi3pECqjDJzWaa3ai+vFfzzpJJ8OkCJT5Rv4LxC5ERltVVmR8
A3T1I/MRktSC0VJLv34daPC2z4Lco/6SPipUpPnL4bE2HATKed4vzoOjQ3tOeGTy
dwi7TFjKwoVDiM7kPPDRnTHqCe5G5n13sZ49dBe9WeJ7ttJauWqoxhlYosCGNPEj
g8ZX8+cvcAhVnz5uFL8roqZ8ygNEQq2mgkU18W8ZZKuiuwR0gdsG0gSBFNTdwIMK
NoreRKMrw0+oLXTIB8SZsoieU6Qi7w3xMAMabe8AJsvYtoersugbOmdxGCr1lsA=
=OD7H
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"PPC:
- Better machine check handling for HV KVM
- Ability to support guests with threads=2, 4 or 8 on POWER9
- Fix for a race that could cause delayed recognition of signals
- Fix for a bug where POWER9 guests could sleep with interrupts pending.
ARM:
- VCPU request overhaul
- allow timer and PMU to have their interrupt number selected from userspace
- workaround for Cavium erratum 30115
- handling of memory poisonning
- the usual crop of fixes and cleanups
s390:
- initial machine check forwarding
- migration support for the CMMA page hinting information
- cleanups and fixes
x86:
- nested VMX bugfixes and improvements
- more reliable NMI window detection on AMD
- APIC timer optimizations
Generic:
- VCPU request overhaul + documentation of common code patterns
- kvm_stat improvements"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (124 commits)
Update my email address
kvm: vmx: allow host to access guest MSR_IA32_BNDCFGS
x86: kvm: mmu: use ept a/d in vmcs02 iff used in vmcs12
kvm: x86: mmu: allow A/D bits to be disabled in an mmu
x86: kvm: mmu: make spte mmio mask more explicit
x86: kvm: mmu: dead code thanks to access tracking
KVM: PPC: Book3S: Fix typo in XICS-on-XIVE state saving code
KVM: PPC: Book3S HV: Close race with testing for signals on guest entry
KVM: PPC: Book3S HV: Simplify dynamic micro-threading code
KVM: x86: remove ignored type attribute
KVM: LAPIC: Fix lapic timer injection delay
KVM: lapic: reorganize restart_apic_timer
KVM: lapic: reorganize start_hv_timer
kvm: nVMX: Check memory operand to INVVPID
KVM: s390: Inject machine check into the nested guest
KVM: s390: Inject machine check into the guest
tools/kvm_stat: add new interactive command 'b'
tools/kvm_stat: add new command line switch '-i'
tools/kvm_stat: fix error on interactive command 'g'
KVM: SVM: suppress unnecessary NMI singlestep on GIF=0 and nested exit
...
A poisoned or migrated hugepage is stored as a swap entry in the page
tables. On architectures that support hugepages consisting of
contiguous page table entries (such as on arm64) this leads to ambiguity
in determining the page table entry to return in huge_pte_offset() when
a poisoned entry is encountered.
Let's remove the ambiguity by adding a size parameter to convey
additional information about the requested address. Also fixup the
definition/usage of huge_pte_offset() throughout the tree.
Link: http://lkml.kernel.org/r/20170522133604.11392-4-punit.agrawal@arm.com
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Acked-by: Steve Capper <steve.capper@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: James Hogan <james.hogan@imgtec.com> (odd fixer:METAG ARCHITECTURE)
Cc: Ralf Baechle <ralf@linux-mips.org> (supporter:MIPS)
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Core:
- The documentation is moved over to RST.
- We now have agreed bindings for enabling input and output
buffers without actually enabling input and/or output on a
pin. We are chiseling out some details of pin control
electronics.
New drivers:
- ZTE ZX
- Renesas RZA1
- MIPS Ingenic JZ47xx: also switch over existing drivers in the
tree to use this pin controller and consolidate earlier
spread out code.
- Microschip MCP23S08: this driver is migrated from the GPIO
subsystem and totally rewritten to use proper pin control.
All users are switched over.
New subdrivers:
- Renesas R8A7743 and R8A7745.
- Allwinner Sunxi A83T R_PIO.
- Marvell MVEBU Armada CP110 and AP806.
- Intel Cannon Lake PCH.
- Qualcomm IPQ8074.
Notable improvements:
- IRQ support on the Marvell MVEBU Armada 37xx.
- Meson driver supports HDMI CEC, AO, I2S, SPDIF and PWM.
- Rockchip driver now supports iomux-route switching for
RK3228, RK3328 and RK3399.
- Rockchip A10 and A20 are merged into a single driver.
- STM32 has improved GPIO support.
- Samsung Exynos drivers are split per ARMv7 and ARMv8.
- Marvell MVEBU is converted to use regmap for register
access.
Maintenance:
- Several Renesas SH-PFC refactorings and updates.
- Serious code size cut for Mediatek MT7623.
- Misc janitorial and MAINTAINERS fixes.
-----BEGIN PGP SIGNATURE-----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=dUFL
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"This is the big bulk of pin control changes for the v4.13 series:
Core:
- The documentation is moved over to RST.
- We now have agreed bindings for enabling input and output buffers
without actually enabling input and/or output on a pin. We are
chiseling out some details of pin control electronics.
New drivers:
- ZTE ZX
- Renesas RZA1
- MIPS Ingenic JZ47xx: also switch over existing drivers in the tree
to use this pin controller and consolidate earlier spread out code.
- Microschip MCP23S08: this driver is migrated from the GPIO
subsystem and totally rewritten to use proper pin control. All
users are switched over.
New subdrivers:
- Renesas R8A7743 and R8A7745.
- Allwinner Sunxi A83T R_PIO.
- Marvell MVEBU Armada CP110 and AP806.
- Intel Cannon Lake PCH.
- Qualcomm IPQ8074.
Notable improvements:
- IRQ support on the Marvell MVEBU Armada 37xx.
- Meson driver supports HDMI CEC, AO, I2S, SPDIF and PWM.
- Rockchip driver now supports iomux-route switching for RK3228,
RK3328 and RK3399.
- Rockchip A10 and A20 are merged into a single driver.
- STM32 has improved GPIO support.
- Samsung Exynos drivers are split per ARMv7 and ARMv8.
- Marvell MVEBU is converted to use regmap for register access.
Maintenance:
- Several Renesas SH-PFC refactorings and updates.
- Serious code size cut for Mediatek MT7623.
- Misc janitorial and MAINTAINERS fixes"
* tag 'pinctrl-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (137 commits)
pinctrl: samsung: Remove bogus irq_[un]mask from resource management
pinctrl: rza1: make structures rza1_gpiochip_template and rza1_pinmux_ops static
pinctrl: rza1: Remove unneeded wrong check for wrong variable
pinctrl: qcom: Add ipq8074 pinctrl driver
pinctrl: freescale: imx7d: make of_device_ids const.
pinctrl: DT: extend the pinmux property to support integers array
pinctrl: generic: Add output-enable property
pinctrl: armada-37xx: Fix number of pin in sdio_sb
pinctrl: armada-37xx: Fix uart2 group selection register mask
pinctrl: bcm2835: Avoid warning from __irq_do_set_handler
pinctrl: sh-pfc: r8a7795: Add PWM support
MAINTAINERS: Add Qualcomm pinctrl drivers section
arm: dts: dt-bindings: Add Renesas RZ/A1 pinctrl header
dt-bindings: pinctrl: Add RZ/A1 bindings doc
pinctrl: Renesas RZ/A1 pin and gpio controller
pinctrl: sh-pfc: r8a7792: Add SCIF1 and SCIF2 pin groups
pinctrl.txt: move it to the driver-api book
pinctrl: ingenic: checking for NULL instead of IS_ERR()
pinctrl: uniphier: fix WARN_ON() of pingroups dump on LD20
pinctrl: uniphier: fix WARN_ON() of pingroups dump on LD11
...
Pull networking updates from David Miller:
"Reasonably busy this cycle, but perhaps not as busy as in the 4.12
merge window:
1) Several optimizations for UDP processing under high load from
Paolo Abeni.
2) Support pacing internally in TCP when using the sch_fq packet
scheduler for this is not practical. From Eric Dumazet.
3) Support mutliple filter chains per qdisc, from Jiri Pirko.
4) Move to 1ms TCP timestamp clock, from Eric Dumazet.
5) Add batch dequeueing to vhost_net, from Jason Wang.
6) Flesh out more completely SCTP checksum offload support, from
Davide Caratti.
7) More plumbing of extended netlink ACKs, from David Ahern, Pablo
Neira Ayuso, and Matthias Schiffer.
8) Add devlink support to nfp driver, from Simon Horman.
9) Add RTM_F_FIB_MATCH flag to RTM_GETROUTE queries, from Roopa
Prabhu.
10) Add stack depth tracking to BPF verifier and use this information
in the various eBPF JITs. From Alexei Starovoitov.
11) Support XDP on qed device VFs, from Yuval Mintz.
12) Introduce BPF PROG ID for better introspection of installed BPF
programs. From Martin KaFai Lau.
13) Add bpf_set_hash helper for TC bpf programs, from Daniel Borkmann.
14) For loads, allow narrower accesses in bpf verifier checking, from
Yonghong Song.
15) Support MIPS in the BPF selftests and samples infrastructure, the
MIPS eBPF JIT will be merged in via the MIPS GIT tree. From David
Daney.
16) Support kernel based TLS, from Dave Watson and others.
17) Remove completely DST garbage collection, from Wei Wang.
18) Allow installing TCP MD5 rules using prefixes, from Ivan
Delalande.
19) Add XDP support to Intel i40e driver, from Björn Töpel
20) Add support for TC flower offload in nfp driver, from Simon
Horman, Pieter Jansen van Vuuren, Benjamin LaHaise, Jakub
Kicinski, and Bert van Leeuwen.
21) IPSEC offloading support in mlx5, from Ilan Tayari.
22) Add HW PTP support to macb driver, from Rafal Ozieblo.
23) Networking refcount_t conversions, From Elena Reshetova.
24) Add sock_ops support to BPF, from Lawrence Brako. This is useful
for tuning the TCP sockopt settings of a group of applications,
currently via CGROUPs"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1899 commits)
net: phy: dp83867: add workaround for incorrect RX_CTRL pin strap
dt-bindings: phy: dp83867: provide a workaround for incorrect RX_CTRL pin strap
cxgb4: Support for get_ts_info ethtool method
cxgb4: Add PTP Hardware Clock (PHC) support
cxgb4: time stamping interface for PTP
nfp: default to chained metadata prepend format
nfp: remove legacy MAC address lookup
nfp: improve order of interfaces in breakout mode
net: macb: remove extraneous return when MACB_EXT_DESC is defined
bpf: add missing break in for the TCP_BPF_SNDCWND_CLAMP case
bpf: fix return in load_bpf_file
mpls: fix rtm policy in mpls_getroute
net, ax25: convert ax25_cb.refcount from atomic_t to refcount_t
net, ax25: convert ax25_route.refcount from atomic_t to refcount_t
net, ax25: convert ax25_uid_assoc.refcount from atomic_t to refcount_t
net, sctp: convert sctp_ep_common.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_transport.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_chunk.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_datamsg.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_auth_bytes.refcnt from atomic_t to refcount_t
...
Implement extended LWSP/SWSP instruction subdecoding for the purpose of
unaligned GP-relative memory access emulation.
With the introduction of the MIPS16e2 ASE[1] the previously must-be-zero
3-bit field at bits 7..5 of the extended encodings of the instructions
selected with the LWSP and SWSP major opcodes has become a `sel' field,
acting as an opcode extension for additional operations. In both cases
the `sel' value of 0 has retained the original operation, that is:
LW rx, offset(sp)
and:
SW rx, offset(sp)
for LWSP and SWSP respectively. In hardware predating the MIPS16e2 ASE
other values may or may not have been decoded, architecturally yielding
unpredictable results, and in our unaligned memory access emulation we
have treated the 3-bit field as a don't-care, that is effectively making
all the possible encodings of the field alias to the architecturally
defined encoding of 0.
For the non-zero values of the `sel' field the MIPS16e2 ASE has in
particular defined these GP-relative operations:
LW rx, offset(gp) # sel = 1
LH rx, offset(gp) # sel = 2
LHU rx, offset(gp) # sel = 4
and
SW rx, offset(gp) # sel = 1
SH rx, offset(gp) # sel = 2
for LWSP and SWSP respectively, which will trap with an Address Error
exception if the effective address calculated is not naturally-aligned
for the operation requested. These operations have been selected for
unaligned access emulation, for consistency with the corresponding
regular MIPS and microMIPS operations.
For other non-zero values of the `sel' field the MIPS16e2 ASE has
defined further operations, which however either never trap with an
Address Error exception, such as LWL or GP-relative SB, or are not
supposed to be emulated, such as LL or SC. These operations have been
selected to exclude from unaligned access emulation, should an Address
Error exception ever happen with them.
Subdecode the `sel' field in unaligned access emulation then for the
extended encodings of the instructions selected with the LWSP and SWSP
major opcodes, whenever support for the MIPS16e2 ASE has been detected
in hardware, and either emulate the operation requested or send SIGBUS
to the originating process, according to the selection described above.
For hardware implementing the MIPS16 ASE, however lacking MIPS16e2 ASE
support retain the original interpretation of the `sel' field.
The effects of this change are illustrated with the following user
program:
$ cat mips16e2-test.c
#include <inttypes.h>
#include <stdio.h>
int main(void)
{
int64_t scratch[16] = { 0 };
int32_t *tmp0, *tmp1, *tmp2;
int i;
scratch[0] = 0xc8c7c6c5c4c3c2c1;
scratch[1] = 0xd0cfcecdcccbcac9;
asm volatile(
"move %0, $sp\n\t"
"move %1, $gp\n\t"
"move $sp, %4\n\t"
"addiu %2, %4, 8\n\t"
"move $gp, %2\n\t"
"lw %2, 2($sp)\n\t"
"sw %2, 16(%4)\n\t"
"lw %2, 2($gp)\n\t"
"sw %2, 24(%4)\n\t"
"lw %2, 1($sp)\n\t"
"sw %2, 32(%4)\n\t"
"lh %2, 1($gp)\n\t"
"sw %2, 40(%4)\n\t"
"lw %2, 3($sp)\n\t"
"sw %2, 48(%4)\n\t"
"lhu %2, 3($gp)\n\t"
"sw %2, 56(%4)\n\t"
"lw %2, 0(%4)\n\t"
"sw %2, 66($sp)\n\t"
"lw %2, 8(%4)\n\t"
"sw %2, 82($gp)\n\t"
"lw %2, 0(%4)\n\t"
"sw %2, 97($sp)\n\t"
"lw %2, 8(%4)\n\t"
"sh %2, 113($gp)\n\t"
"move $gp, %1\n\t"
"move $sp, %0"
: "=&d" (tmp0), "=&d" (tmp1), "=&d" (tmp2), "=m" (scratch)
: "d" (scratch));
for (i = 0; i < sizeof(scratch) / sizeof(*scratch); i += 2)
printf("%016" PRIx64 "\t%016" PRIx64 "\n",
scratch[i], scratch[i + 1]);
return 0;
}
$
to be compiled with:
$ gcc -mips16 -mips32r2 -Wa,-mmips16e2 -o mips16e2-test mips16e2-test.c
$
With 74Kf hardware, which does not implement the MIPS16e2 ASE, this
program produces the following output:
$ ./mips16e2-test
c8c7c6c5c4c3c2c1 d0cfcecdcccbcac9
00000000c6c5c4c3 00000000c6c5c4c3
00000000c5c4c3c2 00000000c5c4c3c2
00000000c7c6c5c4 00000000c7c6c5c4
0000c4c3c2c10000 0000000000000000
0000cccbcac90000 0000000000000000
000000c4c3c2c100 0000000000000000
000000cccbcac900 0000000000000000
$
regardless of whether the change has been applied or not.
With the change not applied and interAptive MR2 hardware[2], which does
implement the MIPS16e2 ASE, it produces the following output:
$ ./mips16e2-test
c8c7c6c5c4c3c2c1 d0cfcecdcccbcac9
00000000c6c5c4c3 00000000cecdcccb
00000000c5c4c3c2 00000000cdcccbca
00000000c7c6c5c4 00000000cfcecdcc
0000c4c3c2c10000 0000000000000000
0000000000000000 0000cccbcac90000
000000c4c3c2c100 0000000000000000
0000000000000000 000000cccbcac900
$
which shows that for GP-relative operations the correct trapping address
calculated from $gp has been obtained from the CP0 BadVAddr register and
so has data from the source operand, however masking and extension has
not been applied for halfword operations.
With the change applied and interAptive MR2 hardware the program
produces the following output:
$ ./mips16e2-test
c8c7c6c5c4c3c2c1 d0cfcecdcccbcac9
00000000c6c5c4c3 00000000cecdcccb
00000000c5c4c3c2 00000000ffffcbca
00000000c7c6c5c4 000000000000cdcc
0000c4c3c2c10000 0000000000000000
0000000000000000 0000cccbcac90000
000000c4c3c2c100 0000000000000000
0000000000000000 0000000000cac900
$
as expected.
References:
[1] "MIPS32 Architecture for Programmers: MIPS16e2 Application-Specific
Extension Technical Reference Manual", Imagination Technologies
Ltd., Document Number: MD01172, Revision 01.00, April 26, 2016
[2] "MIPS32 interAptiv Multiprocessing System Software User's Manual",
Imagination Technologies Ltd., Document Number: MD00904, Revision
02.01, June 15, 2016, Chapter 24 "MIPS16e Application-Specific
Extension to the MIPS32 Instruction Set", pp. 871-883
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16095/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Identify the presence of the MIPS16e2 ASE as per the architecture
specification[1], by checking for CP0 Config5.CA2 bit being 1[2].
References:
[1] "MIPS32 Architecture for Programmers: MIPS16e2 Application-Specific
Extension Technical Reference Manual", Imagination Technologies
Ltd., Document Number: MD01172, Revision 01.00, April 26, 2016,
Section 1.2 "Software Detection of the ASE", p. 5
[2] "MIPS32 interAptiv Multiprocessing System Software User's Manual",
Imagination Technologies Ltd., Document Number: MD00904, Revision
02.01, June 15, 2016, Section 2.2.1.6 "Device Configuration 5 --
Config5 (CP0 Register 16, Select 5)", pp. 71-72
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16094/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Here is the big driver core update for 4.13-rc1.
The large majority of this is a lot of cleanup of old fields in the
driver core structures and their remaining usages in random drivers.
All of those fixes have been reviewed by the various subsystem
maintainers. There's also some small firmware updates in here, a new
kobject uevent api interface that makes userspace interaction easier,
and a few other minor things.
All of these have been in linux-next for a long while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWVpX4A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymobgCfd0d13IfpZoq1N41wc6z2Z0xD7cwAnRMeH1/p
kEeISGpHPYP9f8PBh9FO
=Hfqt
-----END PGP SIGNATURE-----
Merge tag 'driver-core-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big driver core update for 4.13-rc1.
The large majority of this is a lot of cleanup of old fields in the
driver core structures and their remaining usages in random drivers.
All of those fixes have been reviewed by the various subsystem
maintainers. There's also some small firmware updates in here, a new
kobject uevent api interface that makes userspace interaction easier,
and a few other minor things.
All of these have been in linux-next for a long while with no reported
issues"
* tag 'driver-core-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (56 commits)
arm: mach-rpc: ecard: fix build error
zram: convert remaining CLASS_ATTR() to CLASS_ATTR_RO()
driver-core: remove struct bus_type.dev_attrs
powerpc: vio_cmo: use dev_groups and not dev_attrs for bus_type
powerpc: vio: use dev_groups and not dev_attrs for bus_type
USB: usbip: convert to use DRIVER_ATTR_RW
s390: drivers: convert to use DRIVER_ATTR_RO/WO
platform: thinkpad_acpi: convert to use DRIVER_ATTR_RO/RW
pcmcia: ds: convert to use DRIVER_ATTR_RO
wireless: ipw2x00: convert to use DRIVER_ATTR_RW
net: ehea: convert to use DRIVER_ATTR_RO
net: caif: convert to use DRIVER_ATTR_RO
TTY: hvc: convert to use DRIVER_ATTR_RW
PCI: pci-driver: convert to use DRIVER_ATTR_WO
IB: nes: convert to use DRIVER_ATTR_RW
HID: hid-core: convert to use DRIVER_ATTR_RO and drv_groups
arm: ecard: fix dev_groups patch typo
tty: serdev: use dev_groups and not dev_attrs for bus_type
sparc: vio: use dev_groups and not dev_attrs for bus_type
hid: intel-ish-hid: use dev_groups and not dev_attrs for bus_type
...
Here is the large tty/serial patchset for 4.13-rc1.
A lot of tty and serial driver updates are in here, along with some
fixups for some __get/put_user usages that were reported. Nothing huge,
just lots of development by a number of different developers, full
details in the shortlog.
All of these have been in linux-next for a while. There will be a merge
issue with the arm-soc tree in the include/linux/platform_data/atmel.h
file. Stephen has sent out a fixup for it, so it shouldn't be that
difficult to merge.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWVpZ9w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylkTgCfV2HhbxIph/aEL1nJmwW64oCXFrMAoK59ZH65
tBZIosv0d91K1A+mObBT
=adPL
-----END PGP SIGNATURE-----
Merge tag 'tty-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH:
"Here is the large tty/serial patchset for 4.13-rc1.
A lot of tty and serial driver updates are in here, along with some
fixups for some __get/put_user usages that were reported. Nothing
huge, just lots of development by a number of different developers,
full details in the shortlog.
All of these have been in linux-next for a while"
* tag 'tty-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (71 commits)
tty: serial: lpuart: add a more accurate baud rate calculation method
tty: serial: lpuart: add earlycon support for imx7ulp
tty: serial: lpuart: add imx7ulp support
dt-bindings: serial: fsl-lpuart: add i.MX7ULP support
tty: serial: lpuart: add little endian 32 bit register support
tty: serial: lpuart: refactor lpuart32_{read|write} prototype
tty: serial: lpuart: introduce lpuart_soc_data to represent SoC property
serial: imx-serial - move DMA buffer configuration to DT
serial: imx: Enable RTSD only when needed
serial: imx: Remove unused members from imx_port struct
serial: 8250: 8250_omap: Fix race b/w dma completion and RX timeout
serial: 8250: Fix THRE flag usage for CAP_MINI
tty/serial: meson_uart: update to stable bindings
dt-bindings: serial: Add bindings for the Amlogic Meson UARTs
serial: Delete dead code for CIR serial ports
serial: sirf: make of_device_ids const
serial/mpsc: switch to dma_alloc_attrs
tty: serial: Add Actions Semi Owl UART earlycon
dt-bindings: serial: Document Actions Semi Owl UARTs
tty/serial: atmel: make the driver DT only
...
Pull SMP hotplug updates from Thomas Gleixner:
"This update is primarily a cleanup of the CPU hotplug locking code.
The hotplug locking mechanism is an open coded RWSEM, which allows
recursive locking. The main problem with that is the recursive nature
as it evades the full lockdep coverage and hides potential deadlocks.
The rework replaces the open coded RWSEM with a percpu RWSEM and
establishes full lockdep coverage that way.
The bulk of the changes fix up recursive locking issues and address
the now fully reported potential deadlocks all over the place. Some of
these deadlocks have been observed in the RT tree, but on mainline the
probability was low enough to hide them away."
* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
cpu/hotplug: Constify attribute_group structures
powerpc: Only obtain cpu_hotplug_lock if called by rtasd
ARM/hw_breakpoint: Fix possible recursive locking for arch_hw_breakpoint_init
cpu/hotplug: Remove unused check_for_tasks() function
perf/core: Don't release cred_guard_mutex if not taken
cpuhotplug: Link lock stacks for hotplug callbacks
acpi/processor: Prevent cpu hotplug deadlock
sched: Provide is_percpu_thread() helper
cpu/hotplug: Convert hotplug locking to percpu rwsem
s390: Prevent hotplug rwsem recursion
arm: Prevent hotplug rwsem recursion
arm64: Prevent cpu hotplug rwsem recursion
kprobes: Cure hotplug lock ordering issues
jump_label: Reorder hotplug lock and jump_label_lock
perf/tracing/cpuhotplug: Fix locking order
ACPI/processor: Use cpu_hotplug_disable() instead of get_online_cpus()
PCI: Replace the racy recursion prevention
PCI: Use cpu_hotplug_disable() instead of get_online_cpus()
perf/x86/intel: Drop get_online_cpus() in intel_snb_check_microcode()
x86/perf: Drop EXPORT of perf_check_microcode
...
Pull timer updates from Thomas Gleixner:
"A rather large update for timers/timekeeping:
- compat syscall consolidation (Al Viro)
- Posix timer consolidation (Christoph Helwig / Thomas Gleixner)
- Cleanup of the device tree based initialization for clockevents and
clocksources (Daniel Lezcano)
- Consolidation of the FTTMR010 clocksource/event driver (Linus
Walleij)
- The usual set of small fixes and updates all over the place"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (93 commits)
timers: Make the cpu base lock raw
clocksource/drivers/mips-gic-timer: Fix an error code in 'gic_clocksource_of_init()'
clocksource/drivers/fsl_ftm_timer: Unmap region obtained by of_iomap
clocksource/drivers/tcb_clksrc: Make IO endian agnostic
clocksource/drivers/sun4i: Switch to the timer-of common init
clocksource/drivers/timer-of: Fix invalid iomap check
Revert "ktime: Simplify ktime_compare implementation"
clocksource/drivers: Fix uninitialized variable use in timer_of_init
kselftests: timers: Add test for frequency step
kselftests: timers: Fix inconsistency-check to not ignore first timestamp
time: Add warning about imminent deprecation of CONFIG_GENERIC_TIME_VSYSCALL_OLD
time: Clean up CLOCK_MONOTONIC_RAW time handling
posix-cpu-timers: Make timespec to nsec conversion safe
itimer: Make timeval to nsec conversion range limited
timers: Fix parameter description of try_to_del_timer_sync()
ktime: Simplify ktime_compare implementation
clocksource/drivers/fttmr010: Factor out clock read code
clocksource/drivers/fttmr010: Implement delay timer
clocksource/drivers: Add timer-of common init routine
clocksource/drivers/tcb_clksrc: Save timer context on suspend/resume
...
- vcpu request overhaul
- allow timer and PMU to have their interrupt number
selected from userspace
- workaround for Cavium erratum 30115
- handling of memory poisonning
- the usual crop of fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=6hNK
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/ARM updates for 4.13
- vcpu request overhaul
- allow timer and PMU to have their interrupt number
selected from userspace
- workaround for Cavium erratum 30115
- handling of memory poisonning
- the usual crop of fixes and cleanups
Conflicts:
arch/s390/include/asm/kvm_host.h
Since commit 81a76d7119 ("MIPS: Avoid using unwind_stack() with
usermode") show_backtrace() invokes the raw backtracer when
cp0_status & ST0_KSU indicates user mode to fix issues on EVA kernels
where user and kernel address spaces overlap.
However this is used by show_stack() which creates its own pt_regs on
the stack and leaves cp0_status uninitialised in most of the code paths.
This results in the non deterministic use of the raw back tracer
depending on the previous stack content.
show_stack() deals exclusively with kernel mode stacks anyway, so
explicitly initialise regs.cp0_status to KSU_KERNEL (i.e. 0) to ensure
we get a useful backtrace.
Fixes: 81a76d7119 ("MIPS: Avoid using unwind_stack() with usermode")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.15+
Patchwork: https://patchwork.linux-mips.org/patch/16656/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Recent CPUs from Imagination Technologies such as the I6400 or P6600 are
able to speculatively fetch data from memory into caches. This means
that if used in a system with non-coherent DMA they require that caches
be invalidated after a device performs DMA, and before the CPU reads the
DMA'd data, in order to ensure that stale values weren't speculatively
prefetched.
Such CPUs also introduced Memory Accessibility Attribute Registers
(MAARs) in order to control the regions in which they are allowed to
speculate. Thus we can use the presence of MAARs as a good indication
that the CPU requires the above cache maintenance. Use the presence of
MAARs to determine the result of cpu_needs_post_dma_flush() in the
default case, in order to handle these recent CPUs correctly.
Note that the return type of cpu_needs_post_dma_flush() is changed to
bool, such that it's clearer what's happening when cpu_has_maar is cast
to bool for the return value. If this patch were backported to a
pre-v4.7 kernel then MIPS_CPU_MAAR was 1ull<<34, so when cast to an int
we would incorrectly return 0. It so happens that MIPS_CPU_MAAR is
currently 1ull<<30, so when truncated to an int gives a non-zero value
anyway, but even so the implicit conversion from long long int to bool
makes it clearer to understand what will happen than the implicit
conversion from long long int to int would. The bool return type also
fits this usage better semantically, so seems like an all-round win.
Thanks to Ed for spotting the issue for pre-v4.7 kernels & suggesting
the return type change.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Tested-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Cc: Ed Blake <ed.blake@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16363/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
When the scheduler sets TIF_NEED_RESCHED & we call into the scheduler
from arch/mips/kernel/entry.S we disable interrupts. This is true
regardless of whether we reach work_resched from syscall_exit_work,
resume_userspace or by looping after calling schedule(). Although we
disable interrupts in these paths we don't call trace_hardirqs_off()
before calling into C code which may acquire locks, and we therefore
leave lockdep with an inconsistent view of whether interrupts are
disabled or not when CONFIG_PROVE_LOCKING & CONFIG_DEBUG_LOCKDEP are
both enabled.
Without tracing this interrupt state lockdep will print warnings such
as the following once a task returns from a syscall via
syscall_exit_partial with TIF_NEED_RESCHED set:
[ 49.927678] ------------[ cut here ]------------
[ 49.934445] WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:3687 check_flags.part.41+0x1dc/0x1e8
[ 49.946031] DEBUG_LOCKS_WARN_ON(current->hardirqs_enabled)
[ 49.946355] CPU: 0 PID: 1 Comm: init Not tainted 4.10.0-00439-gc9fd5d362289-dirty #197
[ 49.963505] Stack : 0000000000000000 ffffffff81bb5d6a 0000000000000006 ffffffff801ce9c4
[ 49.974431] 0000000000000000 0000000000000000 0000000000000000 000000000000004a
[ 49.985300] ffffffff80b7e487 ffffffff80a24498 a8000000ff160000 ffffffff80ede8b8
[ 49.996194] 0000000000000001 0000000000000000 0000000000000000 0000000077c8030c
[ 50.007063] 000000007fd8a510 ffffffff801cd45c 0000000000000000 a8000000ff127c88
[ 50.017945] 0000000000000000 ffffffff801cf928 0000000000000001 ffffffff80a24498
[ 50.028827] 0000000000000000 0000000000000001 0000000000000000 0000000000000000
[ 50.039688] 0000000000000000 a8000000ff127bd0 0000000000000000 ffffffff805509bc
[ 50.050575] 00000000140084e0 0000000000000000 0000000000000000 0000000000040a00
[ 50.061448] 0000000000000000 ffffffff8010e1b0 0000000000000000 ffffffff805509bc
[ 50.072327] ...
[ 50.076087] Call Trace:
[ 50.079869] [<ffffffff8010e1b0>] show_stack+0x80/0xa8
[ 50.086577] [<ffffffff805509bc>] dump_stack+0x10c/0x190
[ 50.093498] [<ffffffff8015dde0>] __warn+0xf0/0x108
[ 50.099889] [<ffffffff8015de34>] warn_slowpath_fmt+0x3c/0x48
[ 50.107241] [<ffffffff801c15b4>] check_flags.part.41+0x1dc/0x1e8
[ 50.114961] [<ffffffff801c239c>] lock_is_held_type+0x8c/0xb0
[ 50.122291] [<ffffffff809461b8>] __schedule+0x8c0/0x10f8
[ 50.129221] [<ffffffff80946a60>] schedule+0x30/0x98
[ 50.135659] [<ffffffff80106278>] work_resched+0x8/0x34
[ 50.142397] ---[ end trace 0cb4f6ef5b99fe21 ]---
[ 50.148405] possible reason: unannotated irqs-off.
[ 50.154600] irq event stamp: 400463
[ 50.159566] hardirqs last enabled at (400463): [<ffffffff8094edc8>] _raw_spin_unlock_irqrestore+0x40/0xa8
[ 50.171981] hardirqs last disabled at (400462): [<ffffffff8094eb98>] _raw_spin_lock_irqsave+0x30/0xb0
[ 50.183897] softirqs last enabled at (400450): [<ffffffff8016580c>] __do_softirq+0x4ac/0x6a8
[ 50.195015] softirqs last disabled at (400425): [<ffffffff80165e78>] irq_exit+0x110/0x128
Fix this by using the TRACE_IRQS_OFF macro to call trace_hardirqs_off()
when CONFIG_TRACE_IRQFLAGS is enabled. This is done before invoking
schedule() following the work_resched label because:
1) Interrupts are disabled regardless of the path we take to reach
work_resched() & schedule().
2) Performing the tracing here avoids the need to do it in paths which
disable interrupts but don't call out to C code before hitting a
path which uses the RESTORE_SOME macro that will call
trace_hardirqs_on() or trace_hardirqs_off() as appropriate.
We call trace_hardirqs_on() using the TRACE_IRQS_ON macro before calling
syscall_trace_leave() for similar reasons, ensuring that lockdep has a
consistent view of state after we re-enable interrupts.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: linux-mips@linux-mips.org
Cc: stable <stable@vger.kernel.org>
Patchwork: https://patchwork.linux-mips.org/patch/15385/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
We allocate memory for a ready_count variable per-CPU, which is accessed
via a cached non-coherent TLB mapping to perform synchronisation between
threads within the core using LL/SC instructions. In order to ensure
that the variable is contained within its own data cache line we
allocate 2 lines worth of memory & align the resulting pointer to a line
boundary. This is however unnecessary, since kmalloc is guaranteed to
return memory which is at least cache-line aligned (see
ARCH_DMA_MINALIGN). Stop the redundant manual alignment.
Besides cleaning up the code & avoiding needless work, this has the side
effect of avoiding an arithmetic error found by Bryan on 64 bit systems
due to the 32 bit size of the former dlinesz. This led the ready_count
variable to have its upper 32b cleared erroneously for MIPS64 kernels,
causing problems when ready_count was later used on MIPS64 via cpuidle.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: 3179d37ee1 ("MIPS: pm-cps: add PM state entry code for CPS systems")
Reported-by: Bryan O'Donoghue <bryan.odonoghue@imgtec.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@imgtec.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: stable <stable@vger.kernel.org> # v3.16+
Patchwork: https://patchwork.linux-mips.org/patch/15383/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This patch adds gettimeofday_fallback() function that wraps assembly
invocation of gettimeofday() syscall using __NR_gettimeofday.
This function is used if pure VDSO implementation gettimeofday()
does not succeed for any reason. Its imeplementation is enclosed in
"#ifdef CONFIG_MIPS_CLOCK_VSYSCALL" to be in sync with the similar
arrangement for __vdso_gettimeofday().
If syscall invocation via __NR_gettimeofday fails, register a3 will
be set. So, after the syscall, register a3 is tested and the return
valuem is negated if it's set.
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Cc: Douglas Leung <douglas.leung@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16640/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This patch adds clock_gettime_fallback() function that wraps assembly
invocation of clock_gettime() syscall using __NR_clock_gettime.
This function is used if pure VDSO implementation of clock_gettime()
does not succeed for any reason. For example, it is called if the
clkid parameter of clock_gettime() is not one of the clkids listed
in the switch-case block of the function __vdso_clock_gettime()
(one such case for clkid is CLOCK_BOOTIME).
If syscall invocation via __NR_clock_gettime fails, register a3 will
be set. So, after the syscall, register a3 is tested and the return
value is negated if it's set.
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Cc: Douglas Leung <douglas.leung@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16639/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Fix incorrect calculation in do_monotonic() and do_monotonic_coarse()
function that in turn caused incorrect values returned by the vdso
version of system call clock_gettime() on mips64 if its system clock
ID parameter was CLOCK_MONOTONIC or CLOCK_MONOTONIC_COARSE.
Consider these variables and their types on mips32 and mips64:
tk->wall_to_monotonic.tv_sec s64, s64 (kernel/vdso.c)
vdso_data.wall_to_mono_sec u32, u32 (kernel/vdso.c)
to_mono_sec u32, u32 (vdso/gettimeofday.c)
ts->tv_sec s32, s64 (vdso/gettimeofday.c)
For mips64 case, u32 vdso_data.wall_to_mono_sec variable is updated
from the 64-bit signed variable tk->wall_to_monotonic.tv_sec
(kernel/vdso.c:76) which is a negative number holding the time passed
from 1970-01-01 to the time boot started. This 64-bit signed value is
currently around 47+ years, in seconds. For instance, let this value
be:
-1489757461
or
11111111111111111111111111111111 10100111001101000001101011101011
By updating 32-bit vdso_data.wall_to_mono_sec variable, we lose upper
32 bits (signed 1's).
to_mono_sec variable is a parameter of do_monotonic() and
do_monotonic_coarse() functions which holds vdso_data.wall_to_mono_sec
value. Its value needs to be added (or subtracted considering it holds
negative value from the tk->wall_to_monotonic.tv_sec) to the current
time passed from 1970-01-01 (ts->tv_sec), which is again something like
47+ years, but increased by the time passed from the boot to the
current time. ts->tv_sec is 32-bit long in case of 32-bit architecture
and 64-bit long in case of 64-bit architecture. Consider the update of
ts->tv_sec (vdso/gettimeofday.c:55 & 167):
ts->tv_sec += to_mono_sec;
mips32 case: This update will be performed correctly, since both
ts->tv_sec and to_mono_sec are 32-bit long and the sign in to_mono_sec
is preserved. Implicit conversion from u32 to s32 will be done
correctly.
mips64 case: This update will be wrong, since the implicit conversion
will not be done correctly. The reason is that the conversion will be
from u32 to s64. This is because to_mono_sec is 32-bit long for both
mips32 and mips64 cases and s64..33 bits of converted to_mono_sec
variable will be zeros.
So, in order to make MIPS64 implementation work properly for
MONOTONIC and MONOTONIC_COARSE clock ids on mips64, the size of
wall_to_mono_sec variable in mips_vdso_data union and respective
parameters in do_monotonic() and do_monotonic_coarse() functions
should be changed from u32 to u64. Because of consistency, this
size change from u32 and u64 is also done for wall_to_mono_nsec
variable and corresponding function parameters.
As far as similar situations for other architectures are concerned,
let's take a look at arm. Arm has two distinct vdso_data structures
for 32-bit & 64-bit cases, and arm's wall_to_mono_sec and
wall_to_mono_nsec are u32 for 32-bit and u64 for 64-bit cases.
On the other hand, MIPS has only one structure (mips_vdso_data),
hence the need for changing the size of above mentioned parameters.
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Cc: Douglas Leung <douglas.leung@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16638/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Use current_cpu_type() to check for 4Kc processors instead of checking
the PRID directly. This will allow for the 4Kc case to be optimised out
of kernels that can't run on 4KC processors, thanks to __get_cpu_type()
and its unreachable() call.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16205/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
CONFIG_MIPS_PGD_C0_CONTEXT, which allows a pointer to the page directory
to be stored in the cop0 Context register when enabled, was previously
only allowed for MIPSr2. MIPSr6 is just as able to make use of it, so
allow it there too.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16204/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
In systems where there are multiple actors updating the TLB, the
potential exists for a race condition wherein a CPU hits a TLB exception
but by the time it reaches a TLBP instruction the affected TLB entry may
have been replaced. This can happen if, for example, a CPU shares the
TLB between hardware threads (VPs) within a core and one of them
replaces the entry that another has just taken a TLB exception for.
We handle this race in the case of the Hardware Table Walker (HTW) being
the other actor already, but didn't take into account the potential for
multiple threads racing. Include the code for aborting TLB exception
handling in affected multi-threaded systems, those being the I6400 &
I6500 CPUs which share TLB entries between VPs.
In the case of using RiXi without dedicated exceptions we have never
handled this race even for HTW. This patch adds WARN()s to these cases
which ought never to be hit because all CPUs with either HTW or shared
FTLB RAMs also include dedicated RiXi exceptions, but the WARN()s will
ensure this is always the case.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16203/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Some systems share FTLB RAMs or entries between sibling CPUs (ie.
hardware threads, or VP(E)s, within a core). These properties require
kernel handling in various places. As a start this patch introduces
cpu_has_shared_ftlb_ram & cpu_has_shared_ftlb_entries feature macros
which we set appropriately for I6400 & I6500 CPUs. Further patches will
make use of these macros as appropriate.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16202/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
On pre-r6 systems with the MT ASE the CPS SMP code included checks to
halt the VPE running mips_cps_boot_vpes() if its bit in the struct
core_boot_config vpe_mask field is clear. This was largely done in order
to allow us to start arbitrary VPEs within a core despite the fact that
hardware is typically configured to run only VPE0 after powering up a
core. VPE0 would start the desired other VPEs, halt itself, and the fact
that VPE0 started would be largely hidden & irrelevant.
In MIPSr6 multithreading we have control over which VPs start executing
when a core powers up via the cores CPC registers accessed remotely
through the redirect block. For this reason the MIPSr6 multithreading
path in mips_cps_boot_vpes() hasn't bothered up until now to handle
halting the VP running it.
However it is possible to power up cores entirely in hardware by using a
pwr_up pin associated with the core. Unfortunately some systems wire
this pin to a logic 1, which means that it is possible for a core to
power up at a point that software doesn't expect. The result is that we
generally go execute the kernel on a CPU that ought not to be running &
the results can be unpredictable.
Handle this case by stopping VPs that we don't expect to be running in
mips_cps_boot_vpes() - with this change even if a core powers up it will
do nothing useful & all VPs within it will stop running before they
proceed to run general kernel code & do any damage. Ideally we would
produce some sort of warning here, but given the stage of core bringup
this happens at that would be non-trivial. We also will only hit this if
a core starts up after being offlined via hotplug, and when that happens
we will already produce a warning that the CPU didn't power down in
cps_cpu_die() which seems sufficient.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16198/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
If we get into a state where a core that ought to power down isn't doing
so then the current result is that another CPU gets stuck inside
cps_cpu_die() waiting for CPU that ought to be powering down to do so.
The best case scenario is that we then trigger RCU stall messages or
lockup messages, but neither makes it particularly clear what's
happening.
Handle this more gracefully by introducing a timeout beyond which we
warn the user that the core didn't power down & stop waiting for it.
This at least allows the CPU running cps_cpu_die() to continue normally,
and hopefully presuming the CPU that powered back up is doing nothing
harmful the system will continue functioning as normal.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16197/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Systems using the MIPS Coherence Manager (CM) cannot support multi-core
SMP with dcache aliasing. This is because CPU caches are VIPT, but
interventions in CM-based systems provide only the physical address to
remote caches. This means that interventions may behave incorrectly in
the presence of an aliasing dcache, since the physical address used
when handling an intervention may lead to operation on an aliased cache
line rather than the correct line.
Prevent us from running into this issue by refusing to boot secondary
cores in systems where dcache aliasing may occur.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16196/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Prior to MIPSr6 multithreading is only supported if CONFIG_MIPS_MT_SMP
is enabled, so CONFIG_MIPS_MT_SMP selects CONFIG_SYS_SUPPORTS_SCHED_SMT.
With MIPSr6 the CONFIG_MIPS_CPS SMP implementation always supports
multithreading, so have it select CONFIG_SYS_SUPPORTS_SCHED_SMT in order
to allow the scheduler to make better informed decisions on
multithreaded MIPSr6 systems (for example those using I6400 or I6500
CPUs).
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16195/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Rather than using BUG_ON in the case of an invalid attempt to lock
access to a non-zero VP on a pre-CM3 system, use WARN_ON so that we have
even the slightest chance of recovery.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16194/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
CM3 provides a GCR_CL_OTHER register per VP, rather than only per core.
This means that we don't need to prevent other VPs within a core from
racing with code that makes use of the core-other register region.
Reduce locking overhead by demoting the per-core spinlock providing
protection for CM2.5 & lower to a per-CPU/per-VP spinlock for CM3 &
higher.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16193/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
If we're running on a system with only 1 possible CPU then it makes no
sense to reserve or initialise IPIs since we'll never use them. Avoid
doing so.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16192/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Reduce the log level for branch emulation error messages issued before
sending SIGILL by `__compute_return_epc_for_insn' as these are triggered
by user software and are not an event that would normally require any
attention. The same signal sent from elsewhere does not actually leave
any trace in the kernel log at all.
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16402/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Update commit 1ac944007b ("MIPS: math-emu: Add mfhc1 & mthc1
support.") and like done throughout `cop1Emulate' for other cases also
for the MFHC1 and MTHC1 instructions return SIGILL right away rather
than jumping to a single `return' statement.
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16401/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This is a user-visible message, so we want it to be spelled correctly.
Fixes: 5f9f41c474 ("MIPS: kernel: Prepare the JR instruction for emulation on MIPS R6")
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # 3.19+
Patchwork: https://patchwork.linux-mips.org/patch/16400/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Fix:
* commit 8467ca0122 ("MIPS: Emulate the new MIPS R6 branch compact
(BC) instruction"),
* commit 84fef63012 ("MIPS: Emulate the new MIPS R6 BALC
instruction"),
* commit 69b9a2fd05 ("MIPS: Emulate the new MIPS R6 BEQZC and JIC
instructions"),
* commit 28d6f93d20 ("MIPS: Emulate the new MIPS R6 BNEZC and JIALC
instructions"),
* commit c893ce38b2 ("MIPS: Emulate the new MIPS R6 BOVC, BEQC and
BEQZALC instructions")
and send SIGILL rather than returning -SIGILL for R6 branch and jump
instructions. Returning -SIGILL is never correct as the API defines
this function's result upon error to be -EFAULT and a signal actually
issued.
Fixes: 8467ca0122 ("MIPS: Emulate the new MIPS R6 branch compact (BC) instruction")
Fixes: 84fef63012 ("MIPS: Emulate the new MIPS R6 BALC instruction")
Fixes: 69b9a2fd05 ("MIPS: Emulate the new MIPS R6 BEQZC and JIC instructions")
Fixes: 28d6f93d20 ("MIPS: Emulate the new MIPS R6 BNEZC and JIALC instructions")
Fixes: c893ce38b2 ("MIPS: Emulate the new MIPS R6 BOVC, BEQC and BEQZALC instructions")
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # 3.19+
Patchwork: https://patchwork.linux-mips.org/patch/16399/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Fix commit 319824eabc ("MIPS: kernel: branch: Do not emulate the
branch likelies on MIPS R6") and also send SIGILL rather than returning
-SIGILL for BLTZAL, BLTZALL, BGEZAL and BGEZALL instruction encodings no
longer supported in R6, except where emulated. Returning -SIGILL is
never correct as the API defines this function's result upon error to be
-EFAULT and a signal actually issued.
Fixes: 319824eabc ("MIPS: kernel: branch: Do not emulate the branch likelies on MIPS R6")
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # 3.19+
Patchwork: https://patchwork.linux-mips.org/patch/16398/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Use the more accurate `sigill_r2r6' name for the label used in the case
of sending SIGILL in the absence of the instruction emulator for an
earlier ISA level instruction that has been removed as from the R6 ISA,
so that the `sigill_r6' name is freed for the situation where an R6
instruction is not supposed to be interpreted, because the executing
processor does not support the R6 ISA.
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # 3.19+
Patchwork: https://patchwork.linux-mips.org/patch/16397/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Fix commit e50c0a8fa6 ("Support the MIPS32 / MIPS64 DSP ASE.") and
send SIGILL rather than SIGBUS whenever an unimplemented BPOSGE32 DSP
ASE instruction has been encountered in `__compute_return_epc_for_insn'
as our Reserved Instruction exception handler would in response to an
attempt to actually execute the instruction. Sending SIGBUS only makes
sense for the unaligned PC case, since moved to `__compute_return_epc'.
Adjust function documentation accordingly, correct formatting and use
`pr_info' rather than `printk' as the other exit path already does.
Fixes: e50c0a8fa6 ("Support the MIPS32 / MIPS64 DSP ASE.")
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # 2.6.14+
Patchwork: https://patchwork.linux-mips.org/patch/16396/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Fix a regression introduced with commit fb6883e580 ("MIPS: microMIPS:
Support handling of delay slots.") and defer to `__compute_return_epc'
if the ISA bit is set in EPC with non-MIPS16, non-microMIPS hardware,
which will then arrange for a SIGBUS due to an unaligned instruction
reference. Returning EPC here is never correct as the API defines this
function's result to be either a negative error code on failure or one
of 0 and BRANCH_LIKELY_TAKEN on success.
Fixes: fb6883e580 ("MIPS: microMIPS: Support handling of delay slots.")
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # 3.9+
Patchwork: https://patchwork.linux-mips.org/patch/16395/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Complement commit fb6883e580 ("MIPS: microMIPS: Support handling of
delay slots.") and actually decode the regular MIPS JALX major
instruction opcode, the handling of which has been added with the said
commit for EPC calculation in `__compute_return_epc_for_insn'.
Fixes: fb6883e580 ("MIPS: microMIPS: Support handling of delay slots.")
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # 3.9+
Patchwork: https://patchwork.linux-mips.org/patch/16394/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Terminate FPU emulation immediately whenever an ISA mode switch has been
observed. This is so that we do not interpret machine code in the wrong
mode, for example when a regular MIPS FPU instruction has been placed in
a delay slot of a jump that switches into the MIPS16 mode, as with the
following code (taken from a GCC test suite case):
00400650 <set_fast_math>:
400650: 3c020100 lui v0,0x100
400654: 03e00008 jr ra
400658: 44c2f800 ctc1 v0,c1_fcsr
40065c: 00000000 nop
[...]
004012d0 <__libc_csu_init>:
4012d0: f000 6a02 li v0,2
4012d4: f150 0b1c la v1,3f9430 <_DYNAMIC-0x6df0>
4012d8: f400 3240 sll v0,16
4012dc: e269 addu v0,v1
4012de: 659a move gp,v0
4012e0: f00c 64f6 save a0-a2,48,ra,s0-s1
4012e4: 673c move s1,gp
4012e6: f010 9978 lw v1,-32744(s1)
4012ea: d204 sw v0,16(sp)
4012ec: eb40 jalr v1
4012ee: 653b move t9,v1
4012f0: f010 997c lw v1,-32740(s1)
4012f4: f030 9920 lw s1,-32736(s1)
4012f8: e32f subu v1,s1
4012fa: 326b sra v0,v1,2
4012fc: d206 sw v0,24(sp)
4012fe: 220c beqz v0,401318 <__libc_csu_init+0x48>
401300: 6800 li s0,0
401302: 99e0 lw a3,0(s1)
401304: 4801 addiu s0,1
401306: 960e lw a2,56(sp)
401308: 4904 addiu s1,4
40130a: 950d lw a1,52(sp)
40130c: 940c lw a0,48(sp)
40130e: ef40 jalr a3
401310: 653f move t9,a3
401312: 9206 lw v0,24(sp)
401314: ea0a cmp v0,s0
401316: 61f5 btnez 401302 <__libc_csu_init+0x32>
401318: 6476 restore 48,ra,s0-s1
40131a: e8a0 jrc ra
Here `set_fast_math' is called from `40130e' (`40130f' with the ISA bit)
and emulation triggers for the CTC1 instruction. As it is in a jump
delay slot emulation continues from `401312' (`401313' with the ISA
bit). However we have no path to handle MIPS16 FPU code emulation,
because there are no MIPS16 FPU instructions. So the default emulation
path is taken, interpreting a 32-bit word fetched by `get_user' from
`401313' as a regular MIPS instruction, which is:
401313: f5ea0a92 sdc1 $f10,2706(t7)
This makes the FPU emulator proceed with the supposed SDC1 instruction
and consequently makes the program considered here terminate with
SIGSEGV.
A similar although less severe issue exists with pure-microMIPS
processors in the case where similarly an FPU instruction is emulated in
a delay slot of a register jump that (incorrectly) switches into the
regular MIPS mode. A subsequent instruction fetch from the jump's
target is supposed to cause an Address Error exception, however instead
we proceed with regular MIPS FPU emulation.
For simplicity then, always terminate the emulation loop whenever a mode
change is detected, denoted by an ISA mode bit flip. As from commit
377cb1b6c1 ("MIPS: Disable MIPS16/microMIPS crap for platforms not
supporting these ASEs.") the result of `get_isa16_mode' can be hardcoded
to 0, so we need to examine the ISA mode bit by hand.
This complements commit 102cedc32a ("MIPS: microMIPS: Floating point
support.") which added JALX decoding to FPU emulation.
Fixes: 102cedc32a ("MIPS: microMIPS: Floating point support.")
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # 3.9+
Patchwork: https://patchwork.linux-mips.org/patch/16393/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This patch switches MIPS to make use of generically implemented queued
spinlocks, rather than the ticket spinlocks used previously. This allows
us to drop a whole load of inline assembly, share more generic code, and
is also a performance win.
Results from running the AIM7 short workload on a MIPS Creator Ci40 (ie.
2 core 2 thread interAptiv CPU clocked at 546MHz) with v4.12-rc4
pistachio_defconfig, with ftrace disabled due to a current bug, and both
with & without use of queued rwlocks & spinlocks:
Forks | v4.12-rc4 | +qlocks | Change
-------|-----------|----------|--------
10 | 52630.32 | 53316.31 | +1.01%
20 | 51777.80 | 52623.15 | +1.02%
30 | 51645.92 | 52517.26 | +1.02%
40 | 51634.88 | 52419.89 | +1.02%
50 | 51506.75 | 52307.81 | +1.02%
60 | 51500.74 | 52322.72 | +1.02%
70 | 51434.81 | 52288.60 | +1.02%
80 | 51423.22 | 52434.85 | +1.02%
90 | 51428.65 | 52410.10 | +1.02%
The kernels used for these tests also had my "MIPS: Hardcode cpu_has_*
where known at compile time due to ISA" patch applied, which allows the
kernel_uses_llsc checks in cmpxchg() & xchg() to be optimised away at
compile time.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16358/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This patch switches MIPS to make use of generically implemented queued
read/write locks, rather than the custom implementation used previously.
This allows us to drop a whole load of inline assembly, share more
generic code, and is also a performance win.
Results from running the AIM7 short workload on a MIPS Creator Ci40 (ie.
2 core 2 thread interAptiv CPU clocked at 546MHz) with v4.12-rc4
pistachio_defconfig, with ftrace disabled due to a current bug, and both
with & without use of queued rwlocks & spinlocks:
Forks | v4.12-rc4 | +qlocks | Change
-------|-----------|----------|--------
10 | 52630.32 | 53316.31 | +1.01%
20 | 51777.80 | 52623.15 | +1.02%
30 | 51645.92 | 52517.26 | +1.02%
40 | 51634.88 | 52419.89 | +1.02%
50 | 51506.75 | 52307.81 | +1.02%
60 | 51500.74 | 52322.72 | +1.02%
70 | 51434.81 | 52288.60 | +1.02%
80 | 51423.22 | 52434.85 | +1.02%
90 | 51428.65 | 52410.10 | +1.02%
The kernels used for these tests also had my "MIPS: Hardcode cpu_has_*
where known at compile time due to ISA" patch applied, which allows the
kernel_uses_llsc checks in cmpxchg() & xchg() to be optimised away at
compile time.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16357/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The __xchg() function declares its first 2 arguments in reverse order
compared to the xchg() macro, which is confusing & serves no purpose.
Reorder the arguments such that __xchg() & xchg() match.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16356/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Implement support for 1 & 2 byte cmpxchg() using read-modify-write atop
a 4 byte cmpxchg(). This allows us to support these atomic operations
despite the MIPS ISA only providing 4 & 8 byte atomic operations.
This is required in order to support queued rwlocks (qrwlock) in a later
patch, since these make use of a 1 byte cmpxchg() in their slow path.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16355/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Implement 1 & 2 byte xchg() using read-modify-write atop a 4 byte
cmpxchg(). This allows us to support these atomic operations despite the
MIPS ISA only providing for 4 & 8 byte atomic operations.
This is required in order to support queued spinlocks (qspinlock) in a
later patch, since these make use of a 2 byte xchg() in their slow path.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16354/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Replace the macro definition of __cmpxchg() with an inline function,
which is easier to read & modify. The cmpxchg() & cmpxchg_local() macros
are adjusted to call the new __cmpxchg() function.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16353/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The __xchg_u32() & __xchg_u64() functions now add very little value.
This patch therefore removes them, by:
- Moving memory barriers out of them & into xchg(), which also removes
the duplication & readies us to support xchg_relaxed() if we wish to.
- Calling __xchg_asm() directly from __xchg().
- Performing the check for CONFIG_64BIT being enabled in the size=8
case of __xchg().
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16352/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
xchg() has up until now simply returned the x parameter in cases where
it is called with a pointer to a value of an unsupported size. This will
often cause the calling code to hit a failure path, presuming that the
value of x differs from the content of the memory pointed at by ptr, but
we can do better by producing a compile-time or link-time error such
that unsupported calls to xchg() are detectable earlier than runtime.
This patch does this in the same was as is already done for cmpxchg(),
using a call to a missing function annotated with __compiletime_error().
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16351/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Our cmpxchg() implementation relies upon generating a call to a function
which doesn't really exist (__cmpxchg_called_with_bad_pointer) to create
a link failure in cases where cmpxchg() is called with a pointer to a
value of an unsupported size.
The __compiletime_error macro can be used to decorate a function such
that a call to it generates a compile-time, rather than a link-time,
error. This patch uses __compiletime_error to cause bad cmpxchg() calls
to error out at compile time rather than link time, allowing errors to
occur more quickly & making it easier to spot where the problem comes
from.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16350/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Use a macro to generate the 32 & 64 bit variants of the backing code for
xchg(), much as is already done for cmpxchg(). This removes the
duplication that could previously be found in __xchg_u32() &
__xchg_u64().
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16349/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Prior to this patch the xchg & cmpxchg functions have duplicated code
which is for all intents & purposes identical apart from use of a
branch-likely instruction in the R10000_LLSC_WAR case & a regular branch
instruction in the non-R10000_LLSC_WAR case.
This patch removes the duplication, declaring a __scbeqz macro to select
the branch instruction suitable for use when checking the result of an
sc instruction & making use of it to unify the 2 cases.
In __xchg_u{32,64}() this means writing the branch in asm, where it was
previously being done in C as a do...while loop for the
non-R10000_LLSC_WAR case. As this is a single instruction, and adds
consistency with the R10000_LLSC_WAR cases & the cmpxchg() code, this
seems worthwhile.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16348/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Disable usage of PREF instruction usage by memcpy for MIPS R6.
MIPS R6 redefines PREF instruction with smaller offset than
ordinary MIPS. However, the memcpy code uses PREF instruction
with offsets bigger than +-256 bytes.
Malta kernels already disable usage of PREF for memcpy.
This was found during adaptation of MIPS R6 for virtual board
used by Android emulator.
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtech.com>
Cc: James.Hogan@imgtec.com
Cc: Paul.Burton@imgtec.com
Cc: Raghu.Gandham@imgtec.com
Cc: Leonid.Yegoshin@imgtec.com
Cc: Douglas.Leung@imgtec.com
Cc: Petar.Jovanovic@imgtec.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16510/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Add "-modd-spreg" when compiling the kernel for mips32r6 target.
This makes sure the kernel builds properly even with toolchains that
use "-mno-odd-spreg" by default. This is the case with Android gcc.
Prior to this patch, kernel builds using gcc for Android failed with
following error messages, if target architecture is set to mips32r6:
arch/mips/kernel/r4k_switch.S: Assembler messages:
.../r4k_switch.S:210: Error: float register should be even, was 1
.../r4k_switch.S:212: Error: float register should be even, was 3
.../r4k_switch.S:214: Error: float register should be even, was 5
.../r4k_switch.S:216: Error: float register should be even, was 7
.../r4k_switch.S:218: Error: float register should be even, was 9
.../r4k_switch.S:220: Error: float register should be even, was 11
.../r4k_switch.S:222: Error: float register should be even, was 13
.../r4k_switch.S:224: Error: float register should be even, was 15
.../r4k_switch.S:226: Error: float register should be even, was 17
.../r4k_switch.S:228: Error: float register should be even, was 19
.../r4k_switch.S:230: Error: float register should be even, was 21
.../r4k_switch.S:232: Error: float register should be even, was 23
.../r4k_switch.S:234: Error: float register should be even, was 25
.../r4k_switch.S:236: Error: float register should be even, was 27
.../r4k_switch.S:238: Error: float register should be even, was 29
.../r4k_switch.S:240: Error: float register should be even, was 31
make[2]: *** [arch/mips/kernel/r4k_switch.o] Error 1
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Cc: James.Hogan@imgtec.com
Cc: Paul.Burton@imgtec.com
Cc: Raghu.Gandham@imgtec.com
Cc: Leonid.Yegoshin@imgtec.com
Cc: Douglas.Leung@imgtec.com
Cc: Petar.Jovanovic@imgtec.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16509/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Implement support for parsing 'memmap' kernel command line parameter.
This patch covers parsing of the following two formats for 'memmap'
parameter values:
- nn[KMG]@ss[KMG]
- nn[KMG]$ss[KMG]
([KMG] = K M or G (kilo, mega, giga))
These two allowed formats for parameter value are already documented
in file kernel-parameters.txt in Documentation/admin-guide folder.
Some architectures already support them, but Mips did not prior to
this patch.
Excerpt from Documentation/admin-guide/kernel-parameters.txt:
memmap=nn[KMG]@ss[KMG]
[KNL] Force usage of a specific region of memory.
Region of memory to be used is from ss to ss+nn.
memmap=nn[KMG]$ss[KMG]
Mark specific memory as reserved.
Region of memory to be reserved is from ss to ss+nn.
Example: Exclude memory from 0x18690000-0x1869ffff
memmap=64K$0x18690000
or
memmap=0x10000$0x18690000
There is no need to update this documentation file with respect to
this patch.
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Cc: James.Hogan@imgtec.com
Cc: Paul.Burton@imgtec.com
Cc: Raghu.Gandham@imgtec.com
Cc: Leonid.Yegoshin@imgtec.com
Cc: Douglas.Leung@imgtec.com
Cc: Petar.Jovanovic@imgtec.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16508/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Sort enum loongson_cpu_type in a more reasonable manner, this makes the
CPU names more clear and extensible. Those already defined enum values
are renamed to Legacy_* for compatibility.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: John Crispin <john@phrozen.org>
Cc: Steven J . Hill <Steven.Hill@cavium.com>
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16591/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
With this patch we can set irq affinity via procfs, so as to improve
network performance.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: John Crispin <john@phrozen.org>
Cc: Steven J . Hill <Steven.Hill@cavium.com>
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16590/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The various interrupt specifiers in the device tree are not in a valid
format for the MIPS GIC interrupt controller binding. Where each
interrupt should provide 3 values - GIC_LOCAL or GIC_SHARED, the
pin number & the type of interrupt - the device tree was only providing
the pin number. This causes interrupts for those devices to not be used
when a GIC is present. SEAD-3 systems without a GIC are unaffected since
the DT fixup code generates interrupt specifiers that are valid for the
CPU interrupt controller.
Fix this by adding the GIC_SHARED & IRQ_TYPE_LEVEL_HIGH values to each
interrupt specifier.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: c11e3b48db ("MIPS: SEAD3: Probe UARTs using DT")
Fixes: a34e93882d ("MIPS: SEAD3: Probe ethernet controller using DT")
Fixes: 7afd2a5aec ("MIPS: SEAD3: Probe EHCI controller using DT")
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # v4.9+
Patchwork: https://patchwork.linux-mips.org/patch/16189/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The SEAD-3 board may be configured with or without a MIPS Global
Interrupt Controller (GIC). Because of this we have a device tree with a
default case of a GIC present, and code to fixup the device tree based
upon a configuration register that indicates the presence of the GIC.
In order to keep this DT fixup code simple, the interrupt-parent
property was specified at the root node of the SEAD-3 DT, allowing the
fixup code to simply change this property to the phandle of the CPU
interrupt controller if a GIC is not present & affect all
interrupt-using devices at once. This however causes a problem if we do
have a GIC & the device tree is used as-is, because the interrupt-parent
property of the root node applies to the CPU interrupt controller node.
This causes a cycle when of_irq_init() attempts to probe interrupt
controllers in order and boots fail due to a lack of configured
interrupts, with this message printed on the kernel console:
[ 0.000000] OF: of_irq_init: children remain, but no parents
Fix this by removing the interrupt-parent property from the DT root node
& instead setting it for each device which uses interrupts, ensuring
that the CPU interrupt controller node has no interrupt-parent &
allowing of_irq_init() to identify it as the root interrupt controller.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reported-by: Keng Koh <keng.koh@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16187/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Drivers for the mc146818 RTC generally check control registers to
determine whether a value is encoded as binary or as a binary coded
decimal. Setting RTC_ALWAYS_BCD to 1 effectively bypasses these checks
and causes drivers to always expect binary coded decimal values,
regardless of control register values.
This does not seem like a sane default - defaulting to 0 allows the
drivers to check control registers to determine encoding type & allows
the driver to work generically with both binary & BCD encodings. Set
this in mach-generic/mc146818rtc.h such that the generic kernel, or
platforms which don't provide a custom mc146818rtc.h, can have an RTC
driver which works with both encodings.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16185/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Introduce an apply_mips_fdt_fixups() function which can apply fixups to
an FDT based upon an array of fixup descriptions. This abstracts that
functionality such that legacy board code can apply FDT fixups without
requiring lots of duplication.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16184/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Name aliases in the SEAD-3 device tree serial0 & serial1, rather than
uart0 & uart1. This allows the core serial code to make use of the
aliases to ensure that the UARTs are consistently numbered as expected
rather than having the numbering depend upon probe order.
When translating YAMON-provided serial configuration to a device tree
stdout-path property adjust accordingly, such that we continue to
reference a valid alias.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16183/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
YAMON can expose more than 256MB of RAM to Linux on Malta by passing an
ememsize environment variable with the full size, but the kernel then
needs to be careful to choose the corresponding physical memory regions,
avoiding the IO memory window. This is platform dependent, and on Malta
it also depends on the memory layout which varies between system
controllers.
Extend yamon_dt_amend_memory() to generically handle this by taking
[e]memsize bytes of memory from an array of memory regions passed in as
a new parameter. Board code provides this array as appropriate depending
on its own memory map.
[paul.burton@imgtec.com: SEAD-3 supports 384MB DDR from 0]
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16182/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
In preparation for supporting other YAMON-using boards (Malta) & sharing
code to translate information from YAMON into device tree properties,
pull the code doing so for the kernel command line, system memory &
serial configuration out of the SEAD-3 board code.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16181/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The SEAD-3 board doesn't & never has configured the GIC frequency.
Remove the timer node from the DT in order to avoid attempting to probe
the GIC clocksource/clockevent driver which will produce error messages
such as these during boot:
[ 0.000000] GIC frequency not specified.
[ 0.000000] Failed to initialize '/interrupt-controller@1b1c0000/timer': -22
[ 0.000000] clocksource_probe: no matching clocksources found
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16188/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Adjust the atomic loop in the MIPS_ATOMIC_SET operation of the sysmips
system call to branch straight back to the linked load rather than
jumping via a different subsection (whose purpose remains a mystery to
me).
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16150/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
EVA linked loads (LLE) and conditional stores (SCE) should be used on
EVA kernels for the MIPS_ATOMIC_SET operation of the sysmips system
call, or else the atomic set will apply to the kernel view of the
virtual address space (potentially unmapped on EVA kernels) rather than
the user view (TLB mapped).
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.15.x-
Patchwork: https://patchwork.linux-mips.org/patch/16151/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The MIPS sysmips system call handler may return directly from the
MIPS_ATOMIC_SET case (mips_atomic_set()) to syscall_exit. This path
restores the static (callee saved) registers, however they won't have
been saved on entry to the system call.
Use the save_static_function() macro to create a __sys_sysmips wrapper
function which saves the static registers before calling sys_sysmips, so
that the correct static register state is restored by syscall_exit.
Fixes: f1e39a4a61 ("MIPS: Rewrite sysmips(MIPS_ATOMIC_SET, ...) in C with inline assembler")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16149/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The inline asm retry check in the MIPS_ATOMIC_SET operation of the
sysmips system call has been backwards since commit f1e39a4a61 ("MIPS:
Rewrite sysmips(MIPS_ATOMIC_SET, ...) in C with inline assembler")
merged in v2.6.32, resulting in the non R10000_LLSC_WAR case retrying
until the operation was inatomic, before returning the new value that
was probably just written multiple times instead of the old value.
Invert the branch condition to fix that particular issue.
Fixes: f1e39a4a61 ("MIPS: Rewrite sysmips(MIPS_ATOMIC_SET, ...) in C with inline assembler")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16148/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Add a definition of the perf registers for the new I6500 core.
Since I6500 has the same event definitions as I6400, re-use the existing
i6400 map structures by renaming them to a slightly more generic
'i6x00_***_map'.
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16362/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Introduce the I6500 PRID & probe it just the same way as I6400. The MIPS
I6500 is the latest in Imagination Technologies' I-Class range of CPUs,
with a focus on scalability & heterogeneity. It introduces the notion of
multiple clusters to the MIPS Coherent Processing System, allowing for a
far higher total number of cores & threads in a system when compared
with its predecessors. Clusters don't need to be identical, and may
contain differing numbers of cores & IOCUs, or cores with differing
properties.
This patch alone adds the basic support for booting Linux on an I6500
CPU without support for any of its new functionality, for which support
will be introduced in further patches.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16190/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Recent CPUs from Imagination Technologies such as the I6400 or P6600 are
able to speculatively fetch data from memory into caches. This means
that if used in a system with non-coherent DMA they require that caches
be invalidated after a device performs DMA, and before the CPU reads the
DMA'd data, in order to ensure that stale values weren't speculatively
prefetched.
Such CPUs also introduced Memory Accessibility Attribute Registers
(MAARs) in order to control the regions in which they are allowed to
speculate. Thus we can use the presence of MAARs as a good indication
that the CPU requires the above cache maintenance. Use the presence of
MAARs to determine the result of cpu_needs_post_dma_flush() in the
default case, in order to handle these recent CPUs correctly.
Note that the return type of cpu_needs_post_dma_flush() is changed to
bool, such that it's clearer what's happening when cpu_has_maar is cast
to bool for the return value. If this patch were backported to a
pre-v4.7 kernel then MIPS_CPU_MAAR was 1ull<<34, so when cast to an int
we would incorrectly return 0. It so happens that MIPS_CPU_MAAR is
currently 1ull<<30, so when truncated to an int gives a non-zero value
anyway, but even so the implicit conversion from long long int to bool
makes it clearer to understand what will happen than the implicit
conversion from long long int to int would. The bool return type also
fits this usage better semantically, so seems like an all-round win.
Thanks to Ed for spotting the issue for pre-v4.7 kernels & suggesting
the return type change.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Tested-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Cc: Ed Blake <ed.blake@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16363/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
KProbes of __seccomp_filter() are not very useful without access to
the syscall arguments.
Do what x86 does, and populate a struct seccomp_data to be passed to
__secure_computing(). This allows samples/bpf/tracex5 to extract a
sensible trace.
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16368/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Since the eBPF machine has 64-bit registers, we only support this in
64-bit kernels. As of the writing of this commit log test-bpf is showing:
test_bpf: Summary: 316 PASSED, 0 FAILED, [308/308 JIT'ed]
All current test cases are successfully compiled.
Many examples in samples/bpf are usable, specifically tracex5 which
uses tail calls works.
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16369/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Instead of doing a linear search through the insn_table for each
instruction, use the opcode as direct index into the table. This will
give constant time lookup performance as the number of supported
opcodes increases. Make the tables const as they are only ever read.
For uasm-mips.c sort the table alphabetically, and remove duplicate
entries, uasm-micromips.c was already sorted and duplicate free.
There is a small savings in object size as struct insn loses a field:
$ size arch/mips/mm/uasm-mips.o arch/mips/mm/uasm-mips.o.save
text data bss dec hex filename
10040 0 0 10040 2738 arch/mips/mm/uasm-mips.o
9240 1120 0 10360 2878 arch/mips/mm/uasm-mips.o.save
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16365/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The module load code has previously had entirely separate
implementations for rel & rela style relocs, which unnecessarily
duplicates a whole lot of code. Unify the implementations of both types
of reloc, sharing the bulk of the code.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15832/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
If we hit an error whilst processing a reloc then we would return early
from apply_relocate & potentially not free entries in r_mips_hi16_list,
thereby leaking memory. Fix this by ensuring that we always run the code
to free r_mipps_hi16_list when errors occur.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: 861667dc82 ("MIPS: Fix race condition in module relocation code.")
Fixes: 04211a5746 ("MIPS: Bail on unsupported module relocs")
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15831/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
In this sequence the 'move' is assumed in the delay slot of the 'beq',
but head.S is in reorder mode and the former gets pushed one 'nop'
farther by the assembler.
The corrected behavior made booting with an UHI supplied dtb erratic.
Fixes: 15f37e1588 ("MIPS: store the appended dtb address in a variable")
Signed-off-by: Karl Beldan <karl.beldan+oss@gmail.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: Jonas Gorski <jogo@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16614/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Two entries being added at the same time to the IFLA
policy table, whilst parallel bug fixes to decnet
routing dst handling overlapping with the dst gc removal
in net-next.
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds the new getsockopt(2) option SO_PEERGROUPS on SOL_SOCKET to
retrieve the auxiliary groups of the remote peer. It is designed to
naturally extend SO_PEERCRED. That is, the underlying data is from the
same credentials. Regarding its syntax, it is based on SO_PEERSEC. That
is, if the provided buffer is too small, ERANGE is returned and @optlen
is updated. Otherwise, the information is copied, @optlen is set to the
actual size, and 0 is returned.
While SO_PEERCRED (and thus `struct ucred') already returns the primary
group, it lacks the auxiliary group vector. However, nearly all access
controls (including kernel side VFS and SYSVIPC, but also user-space
polkit, DBus, ...) consider the entire set of groups, rather than just
the primary group. But this is currently not possible with pure
SO_PEERCRED. Instead, user-space has to work around this and query the
system database for the auxiliary groups of a UID retrieved via
SO_PEERCRED.
Unfortunately, there is no race-free way to query the auxiliary groups
of the PID/UID retrieved via SO_PEERCRED. Hence, the current user-space
solution is to use getgrouplist(3p), which itself falls back to NSS and
whatever is configured in nsswitch.conf(3). This effectively checks
which groups we *would* assign to the user if it logged in *now*. On
normal systems it is as easy as reading /etc/group, but with NSS it can
resort to quering network databases (eg., LDAP), using IPC or network
communication.
Long story short: Whenever we want to use auxiliary groups for access
checks on IPC, we need further IPC to talk to the user/group databases,
rather than just relying on SO_PEERCRED and the incoming socket. This
is unfortunate, and might even result in dead-locks if the database
query uses the same IPC as the original request.
So far, those recursions / dead-locks have been avoided by using
primitive IPC for all crucial NSS modules. However, we want to avoid
re-inventing the wheel for each NSS module that might be involved in
user/group queries. Hence, we would preferably make DBus (and other IPC
that supports access-management based on groups) work without resorting
to the user/group database. This new SO_PEERGROUPS ioctl would allow us
to make dbus-daemon work without ever calling into NSS.
Cc: Michal Sekletar <msekleta@redhat.com>
Cc: Simon McVittie <simon.mcvittie@collabora.co.uk>
Reviewed-by: Tom Gundersen <teg@jklm.no>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit fixes a "maybe-uninitialized" build failure in
arch/mips/kvm/tlb.c when KVM, DYNAMIC_DEBUG and JUMP_LABEL are all
enabled. The failure is:
In file included from ./include/linux/printk.h:329:0,
from ./include/linux/kernel.h:13,
from ./include/asm-generic/bug.h:15,
from ./arch/mips/include/asm/bug.h:41,
from ./include/linux/bug.h:4,
from ./include/linux/thread_info.h:11,
from ./include/asm-generic/current.h:4,
from ./arch/mips/include/generated/asm/current.h:1,
from ./include/linux/sched.h:11,
from arch/mips/kvm/tlb.c:13:
arch/mips/kvm/tlb.c: In function ‘kvm_mips_host_tlb_inv’:
./include/linux/dynamic_debug.h:126:3: error: ‘idx_kernel’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
__dynamic_pr_debug(&descriptor, pr_fmt(fmt), \
^~~~~~~~~~~~~~~~~~
arch/mips/kvm/tlb.c:169:16: note: ‘idx_kernel’ was declared here
int idx_user, idx_kernel;
^~~~~~~~~~
There is a similar error relating to "idx_user". Both errors were
observed with GCC 6.
As far as I can tell, it is impossible for either idx_user or idx_kernel
to be uninitialized when they are later read in the calls to kvm_debug,
but to satisfy the compiler, add zero initializers to both variables.
Signed-off-by: James Cowgill <James.Cowgill@imgtec.com>
Fixes: 57e3869cfa ("KVM: MIPS/TLB: Generalise host TLB invalidate to kernel ASID")
Cc: <stable@vger.kernel.org> # 4.11+
Acked-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Stack guard page is a useful feature to reduce a risk of stack smashing
into a different mapping. We have been using a single page gap which
is sufficient to prevent having stack adjacent to a different mapping.
But this seems to be insufficient in the light of the stack usage in
userspace. E.g. glibc uses as large as 64kB alloca() in many commonly
used functions. Others use constructs liks gid_t buffer[NGROUPS_MAX]
which is 256kB or stack strings with MAX_ARG_STRLEN.
This will become especially dangerous for suid binaries and the default
no limit for the stack size limit because those applications can be
tricked to consume a large portion of the stack and a single glibc call
could jump over the guard page. These attacks are not theoretical,
unfortunatelly.
Make those attacks less probable by increasing the stack guard gap
to 1MB (on systems with 4k pages; but make it depend on the page size
because systems with larger base pages might cap stack allocations in
the PAGE_SIZE units) which should cover larger alloca() and VLA stack
allocations. It is obviously not a full fix because the problem is
somehow inherent, but it should reduce attack space a lot.
One could argue that the gap size should be configurable from userspace,
but that can be done later when somebody finds that the new 1MB is wrong
for some special case applications. For now, add a kernel command line
option (stack_guard_gap) to specify the stack gap size (in page units).
Implementation wise, first delete all the old code for stack guard page:
because although we could get away with accounting one extra page in a
stack vma, accounting a larger gap can break userspace - case in point,
a program run with "ulimit -S -v 20000" failed when the 1MB gap was
counted for RLIMIT_AS; similar problems could come with RLIMIT_MLOCK
and strict non-overcommit mode.
Instead of keeping gap inside the stack vma, maintain the stack guard
gap as a gap between vmas: using vm_start_gap() in place of vm_start
(or vm_end_gap() in place of vm_end if VM_GROWSUP) in just those few
places which need to respect the gap - mainly arch_get_unmapped_area(),
and and the vma tree's subtree_gap support for that.
Original-patch-by: Oleg Nesterov <oleg@redhat.com>
Original-patch-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Tested-by: Helge Deller <deller@gmx.de> # parisc
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The .its targets require information about the kernel binary, such as
its entry point, which is extracted from the vmlinux ELF. We therefore
require that the ELF is built before the .its files are generated.
Declare this requirement in the Makefile such that make will ensure this
is always the case, otherwise in corner cases we can hit issues as the
.its is generated with an incorrect (either invalid or stale) entry
point.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: cf2a5e0bb4 ("MIPS: Support generating Flattened Image Trees (.itb)")
Cc: linux-mips@linux-mips.org
Cc: stable <stable@vger.kernel.org> # v4.9+
Patchwork: https://patchwork.linux-mips.org/patch/16179/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The code handling the pop76 opcode (ie. bnezc & jialc instructions) in
__compute_return_epc_for_insn() needs to set the value of $31 in the
jialc case, which is encoded with rs = 0. However its check to
differentiate bnezc (rs != 0) from jialc (rs = 0) was unfortunately
backwards, meaning that if we emulate a bnezc instruction we clobber $31
& if we emulate a jialc instruction it actually behaves like a jic
instruction.
Fix this by inverting the check of rs to match the way the instructions
are actually encoded.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: 28d6f93d20 ("MIPS: Emulate the new MIPS R6 BNEZC and JIALC instructions")
Cc: stable <stable@vger.kernel.org> # v4.0+
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16178/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The config option name is now renamed to 'TIMER_OF' for consistency with
the CLOCKSOURCE_OF_DECLARE => TIMER_OF_DECLARE change.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
