rsnd driver supports SSIU now, let's use it.
Then, BUSIF DMA settings on rcar_sound,ssi (= rxu, txu) are
no longer needed.
To avoid git merge timing issue / git bisect issue,
this patch doesn't remove it so far, but will be removed in
the future.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch adds I2C-DVFS device node for the R8A77990 SoC.
v2
* Drop aliases update as in upstream it is not required to configure the
BD9571 PMIC for DDR backup, nor is the use of i2c are aliases desired.
* Do not describe the device as compatible with "renesas,rcar-gen3-iic" or
"renesas,rmobile-iic" fallback compat strings. The absence of automatic
transmission registers leads us to declare the r8a77990 IIC controller as
incompatible.
v2.1
* Reduced register range to reflect documentation
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Set the capacity-dmips-mhz for R-Car Gen3 SoCs, that is based on
dhrystone. The average in 10 times of dhrystone result as follows:
r8a7795 SoC (A57x4 + A53x4)
CPU max-freq dhrystone
---------------------------------
A57 1500 MHz 11470943 lps/s
A53 1200 MHz 4798583 lps/s
r8a7796 SoC (A57x2 + A53x4)
CPU max-freq dhrystone
---------------------------------
A57 1500 MHz 11463526 lps/s
A53 1200 MHz 4793276 lps/s
Based on above, capacity-dmips-mhz values are calculated as follows:
r8a7795 SoC
A57 : 1024 / (11470943 / 1500) * (11470943 / 1500) = 1024
A53 : 1024 / (11470943 / 1500) * ( 4798583 / 1200) = 535
r8a7796 SoC
A57 : 1024 / (11463526 / 1500) * (11463526 / 1500) = 1024
A53 : 1024 / (11463526 / 1500) * ( 4793276 / 1200) = 535
However, since each CPUs have different max frequencies, the final
CPU capacities of A53 are scaled by this difference, the values are
as follows.
[r8a7795 SoC]
$ cat /sys/devices/system/cpu/cpu*/cpu_capacity
1024 <---- CPU capacity of A57
1024
1024
1024
428 <---- CPU capacity of A53
428
428
428
[r8a7796 SoC]
$ cat /sys/devices/system/cpu/cpu*/cpu_capacity
1024 <---- CPU capacity of A57
1024
428 <---- CPU capacity of A53
428
428
428
Signed-off-by: Gaku Inami <gaku.inami.xh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch adds the "cpu-map" into r8a7795/r8a7796 composed of
multi-cluster. This definition is used to parse the cpu topology.
Signed-off-by: Gaku Inami <gaku.inami.xh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Now that include/dt-bindings/clock/r8a774a1-cpg-mssr.h is in Linus'
master branch we can replace clock related magic numbers with the
corresponding labels.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
[simon: corrected whitespace]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Now that include/dt-bindings/power/r8a774a1-sysc.h is in Linus'
master branch we can replace power related magic numbers with
the corresponding labels.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
rsnd driver supports SSIU now, let's use it.
Then, BUSIF DMA settings on rcar_sound,ssi (= rxu, txu) are
no longer needed.
To avoid git merge timing issue / git bisect issue,
this patch doesn't remove it so far, but will be removed in
the future.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The eMMC card has two supplies, VCC and VCCQ. The VCC supplies the NAND
array and the VCCQ supplies the bus. On Salvator-X and ULCB, the VCC is
connected to 3.3V rail, while the VCCQ is connected to 1.8V rail. Adjust
the pinmux to match the bus, which is always operating in 1.8V mode.
While at it, deduplicate the pinmux entries, which are now the same for
both default and UHS modes. We still need the two pinctrl entries to
match the bindings though.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch adds Audio-DMAC0 device node and Sound device node
for the R8A77990 SoC.
Based on work by Takeshi Kihara and Hai Nguyen Pham.
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
[simon: dropped include update, which is already present]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch adds/enables USB2.0 peripheral for R-Car [DE]3 boards.
R-Car E3 Ebisu board connects the ID pin to the SoC, so this adds
a group "usb0_id" into usb0_pins node. Also, to use SW15 pin 3 side,
this patch adds vbus0_usb2 node on r8a77990-ebisu.dts.
R-Car D3 Draak board doesn't connect the ID pin, so this adds
"renesas,no-otg-pins" property into usb2_phy0 node.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch adds a property "companion" with xhci0 phandle to
the usb3_peri0 node in salvator-common.dtsi.
About the detail of this property for renesas_usb3 udc driver, please
refer to the commit 39facfa01c ("usb: gadget: udc: renesas_usb3:
Add register of usb role switch").
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Hook up the R-Car V3H AVB device to IPMMU-DS1 33 as described in
the data sheet.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The "official" Condor boards have always been wired to mount NFS via
GEther, not EtherAVB -- the boards resoldered for EtherAVB were local
to Cogent Embedded, so we've been having an unpleasant situation where
a "normal" Condor board still can't mount NFS (unless an EtherAVB PHY
extension board is plugged in). Switch from EtherAVB to GEther at last!
Fixes: 8091788f3d ("arm64: dts: renesas: condor: add EtherAVB support")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Describe MSIOF in the R8A779{7|8}0 device trees.
The DMA props are omitted for R8A77980 as the RT-DMAC isn't supported
(yet?)...
Based on the original (and large) patches by Vladimir Barinov.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch adds a device node for the Interrupt Controller for External
Devices (INTC-EX) on R-Car E3, which serves external IRQ pins IRQ[0-5].
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
commit 2d87dc0e5b ("arm64: dts: renesas: r8a7795: Add address
properties to rcar_sound port nodes") added missing #address-cells
and #size-cells for sound ports.
But, these are based on platform, not on SoC. This patch cleanups it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Adds LVDS decoder, HDMI encoder and connector for the Draak board.
The LVDS0 and LVDS1 encoders can use the DU_DOTCLKIN0, DU_DOTCLKIN1 and
EXTAL externals clocks. Two of them are provided to the SoC on the Draak
board, hook them up in DT.
Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add the LVDS decoder, HDMI encoder, VGA encoder and HDMI and VGA
connectors, and wire up the display-related nodes with clocks, pinmux
and regulators.
The LVDS0 and LVDS1 encoders can use the DU_DOTCLKIN0, DU_DOTCLKIN1 and
EXTAL externals clocks. Two of them are provided to the SoC on the Ebisu
board, hook them up in DT.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
R-Car Gen3 SoCs need to enable/deassert clocks/resets of both usb 2.0
host (included phy) and peripheral. Otherwise, other side device
cannot work correctly. So, this patch revises properties of clocks
and resets. After that, each device driver can enable/deassert
clocks/resets by its self.
Notes:
- To work the renesas_usbhs driver correctly when host side drivers
are disabled and the renesas_usbhs driver doesn't have multiple
clock management, this patch doesn't change the order of the clocks
property in each hsusb node.
- This patch doesn't have any side-effects even if the renesas_usbhs
driver doesn't have reset_control and multiple clock management.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
It can't boot without bootargs settings on Uboot on ulcb board.
This patch adds missing default bootargs.
ulcb BSP can overwrite it by own UBoot settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
For R-Car V3H hook up SYS-DMAC1 and SYS-DMAC2 to IPMMU-DS1 to match
information in the R-Car Gen3 Rev.1.00 (April 2018) datasheet.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
