1. Many cleanups of DTS and alignments to dtschema. Most of them do not
have any functional effect except passing dtschema checks or dtc W=2
builds.
2. Fix USB 3.0 ports on Odroid XU board: wrong roles assigned to two
ports, missing supply to the USB over-current and VBUS control pins
and finally missing pin configuration for these pins.
3. Switch Exynos5422 DMC driver to monitoring/polling mode, instead of
using interrupts.
4. Correct the usage of "opp-shared" properties which lead to disabling
the bus frequency and voltage scaling.
5. Enable Bluetooth on few Exynos4210 and Exynos4412 boards.
6. Enable dual-role USB on Odroid U3+ board.
7. Add Ethernet description in multiple Odroid DTS allowing also easy
MAC address filling by bootloader.
8. Add Ethernet to Artik 5 (Exynos3250) board.
9. Add interconnect properties to Exynos4412 to fix old Mixer issues.
-----BEGIN PGP SIGNATURE-----
iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAl+usdYQHGtyemtAa2Vy
bmVsLm9yZwAKCRDBN2bmhouD1y9bD/4gMww53tOQdr1nzTOwR7eNQiV2D+7/iJ8P
EBAxumZ4XI0R6AN9vfBajEO8L76ny3v3r78Jtz+dN2LtxaXy0OaVRsX53PNyUFS3
h+WUhk9w8Tujfbe55ac4uYquBg/yrItG8YmqFrCu7dQ1fHT6+5IxoN7kRM+gdIBj
g2/DeEJkIsQGAGRWhcPP3k6ghfCtBY47iY8MGtP7Y/gdXC640fk2pnxWjaeZ13oE
WCJ4/eb0jRS/uB76Ok7g/VJYb36wQ3s/uMBOZ994iFCECxQ//q+dE4uB+8L1MWXp
hv7aVxw46rKhtEBqKm2UlHfJLS4Q6Smsf+jP1jelRYeGROhWjX+1cO8Ul4lyGggG
arjPx3+1b+NwWkg6kR7Nz8OzYHIws0u3+AJPwpWrJ6Iyq3nEe8Aj3rg9iF1P26Zh
CBYMRjuW3OqCF9CNjy8DoOhHmB4zilFwHptrZwz9V6AH/Yqx3jlRvsDmB8ulQQSh
lCq5uLe6U2K+JQAz+Jq/IRZ7zsLn7NxAl9vexLIe0eRAZNcYy44i6I799JYSsB9M
sULvoPRNxEcQh4BScAKoJuZnh8eH/2kUngln/YXtgcdwUlssMhPamAx07Hz35/8Z
NbRwE1nX6HOGp1UGc8mz89uUUaTOlztJE1mdxLe0HXZAt8uppqR8XdHsLXqto8Iv
YlxFVH/O+w==
=TybJ
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v5.11
1. Many cleanups of DTS and alignments to dtschema. Most of them do not
have any functional effect except passing dtschema checks or dtc W=2
builds.
2. Fix USB 3.0 ports on Odroid XU board: wrong roles assigned to two
ports, missing supply to the USB over-current and VBUS control pins
and finally missing pin configuration for these pins.
3. Switch Exynos5422 DMC driver to monitoring/polling mode, instead of
using interrupts.
4. Correct the usage of "opp-shared" properties which lead to disabling
the bus frequency and voltage scaling.
5. Enable Bluetooth on few Exynos4210 and Exynos4412 boards.
6. Enable dual-role USB on Odroid U3+ board.
7. Add Ethernet description in multiple Odroid DTS allowing also easy
MAC address filling by bootloader.
8. Add Ethernet to Artik 5 (Exynos3250) board.
9. Add interconnect properties to Exynos4412 to fix old Mixer issues.
* tag 'samsung-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (36 commits)
ARM: dts: exynos: use hyphens in MFC reserved memory node names
ARM: dts: exynos: use hyphens in Exynos5 node names
ARM: dts: exynos: use generic name for max77693 motor in Midas
ARM: dts: exynos: use hyphens in Exynos4 node names
ARM: dts: exynos: use hyphens in Exynos3250 node names
ARM: dts: exynos: Add interconnects to Exynos4412 mixer
ARM: dts: exynos: Add interconnect properties to Exynos4412 bus nodes
ARM: dts: exynos: Add Ethernet to Artik 5 board
ARM: dts: exynos: Add a placeholder for a MAC address
ARM: dts: exynos: Add Ethernet interface description for Odroid X/X2
ARM: dts: exynos: Add Ethernet interface description for Odroid U3
ARM: dts: exynos: Add Ethernet interface description for Odroid XU
ARM: dts: exynos: Add Ethernet interface description for Odroid XU3 Lite
ARM: dts: exynos: Enable DWC2 dual-role support on OdroidU3+ boards
ARM: dts: s5pv210: adjust node names to DT spec
ARM: dts: exynos: adjust node names to DT spec in Exynos542x boards
ARM: dts: exynos: adjust node names to DT spec in Odroid XU
ARM: dts: exynos: adjust node names to DT spec in Exynos5250 boards
ARM: dts: exynos: remove redundant status=okay in Exynos4412 boards
ARM: dts: exynos: adjust node names to DT spec in Exynos4412 boards
...
Link: https://lore.kernel.org/r/20201113162211.10020-2-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Touch screen and OV5640 camera support for the iWave RainboW Qseven
board (G21D), and its camera expansion board,
- Support for the AISTARVISION MIPI Adapter V2.1 board connected to
HiHope RZ/G2 boards,
- SPI (MSIOF) support for the R-Car M3-W+ SoC,
- Digital Radio Interface (DRIF) support for the R-Car M3-N SoC,
- Initial support for the R-Car M3-W+ ULCB/Kingfisher board combo,
- Minor fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCX66VTQAKCRCKwlD9ZEnx
cFhnAP9W9Jp5o/gp9JQ+Y2Js3xMDD9JngTYRQ+9x4qu2HTf0AAEAjfSzb0T2ub/x
HaW5LisNk1LZNp09+9ugw/nNZxp45AQ=
=QdJ8
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-dt-for-v5.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v5.11
- Touch screen and OV5640 camera support for the iWave RainboW Qseven
board (G21D), and its camera expansion board,
- Support for the AISTARVISION MIPI Adapter V2.1 board connected to
HiHope RZ/G2 boards,
- SPI (MSIOF) support for the R-Car M3-W+ SoC,
- Digital Radio Interface (DRIF) support for the R-Car M3-N SoC,
- Initial support for the R-Car M3-W+ ULCB/Kingfisher board combo,
- Minor fixes and improvements.
* tag 'renesas-arm-dt-for-v5.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: hihope-rev4: Add a comment explaining switch SW2404
arm64: dts: renesas: r8a77961: ulcb-kf: Initial device tree
arm64: dts: renesas: r8a77961: Add CAN{0,1} placeholder nodes
arm64: dts: renesas: beacon-renesom-baseboard: Move connector node out of hd3ss3220 device
arm64: dts: renesas: cat874: Move connector node out of hd3ss3220 device
arm64: dts: renesas: rzg2: Convert EtherAVB to explicit delay handling
arm64: dts: renesas: rcar-gen3: Convert EtherAVB to explicit delay handling
arm64: dts: renesas: r8a77965: Add DRIF support
arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2N
arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2M
arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2H
arm64: dts: renesas: aistarvision-mipi-adapter-2.1: Add parent macro for each sensor
arm64: dts: renesas: cat875: Remove rxc-skew-ps from ethernet-phy node
arm64: dts: renesas: hihope-rzg2-ex: Drop rxc-skew-ps from ethernet-phy node
ARM: dts: r8a7742-iwg21d-q7-dbcm-ca: Enable VIN instances
arm64: dts: renesas: r8a77961: Add MSIOF nodes
arm64: dts: renesas: Align GPIO hog names with dtschema
ARM: dts: r8a7742-iwg21d-q7: Add LCD support
Link: https://lore.kernel.org/r/20201113150854.3923885-3-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This sets up the Atmel maXTouch touchscreen to use proper
VDDA and VDD supplies as now supported by bindings and
driver.
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: Nick Reitemeyer <nick.reitemeyer@web.de>
Cc: Nick Dyer <nick@shmanahar.org>
Link: https://lore.kernel.org/r/20201120124212.1086063-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The reset GPIO logic of the Atmel maxtouch driver was changed to be
active low at around the same time P4 Note device tree was accepted into
the kernel. Adjust the configuration so that the touchscreen is in a
usable state.
Signed-off-by: Martin Jücker <martin.juecker@gmail.com>
Link: https://lore.kernel.org/r/20201120160053.18942-1-martin.juecker@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The board is using McASP2 for both analog (tlv320aic3106) and
HDMI (SiI9022) audio.
12.288MHz oscillator provides the MCLK for both aic3106 and SiI9022.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Provide an empty 'ports' container node with the correct #address-cells
and #size-cells properties. This silences the following warning:
arch/arm/boot/dts/bcm958522er.dt.yaml:
ethernet-switch@36000: 'oneOf' conditional failed, one must be fixed:
'ports' is a required property
'ethernet-ports' is a required property
From schema:
Documentation/devicetree/bindings/net/dsa/b53.yaml
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Provide a valid compatible string for the Ethernet switch node based on
the board including the switch. This allows us to have sane defaults and
silences the following warnings:
arch/arm/boot/dts/bcm958522er.dt.yaml:
ethernet-switch@36000: compatible: 'oneOf' conditional failed,
one
must be fixed:
['brcm,bcm5301x-srab'] is too short
'brcm,bcm5325' was expected
'brcm,bcm53115' was expected
'brcm,bcm53125' was expected
'brcm,bcm53128' was expected
'brcm,bcm5365' was expected
'brcm,bcm5395' was expected
'brcm,bcm5389' was expected
'brcm,bcm5397' was expected
'brcm,bcm5398' was expected
'brcm,bcm11360-srab' was expected
'brcm,bcm5301x-srab' is not one of ['brcm,bcm53010-srab',
'brcm,bcm53011-srab', 'brcm,bcm53012-srab', 'brcm,bcm53018-srab',
'brcm,bcm53019-srab']
'brcm,bcm5301x-srab' is not one of ['brcm,bcm11404-srab',
'brcm,bcm11407-srab', 'brcm,bcm11409-srab', 'brcm,bcm58310-srab',
'brcm,bcm58311-srab', 'brcm,bcm58313-srab']
'brcm,bcm5301x-srab' is not one of ['brcm,bcm58522-srab',
'brcm,bcm58523-srab', 'brcm,bcm58525-srab', 'brcm,bcm58622-srab',
'brcm,bcm58623-srab', 'brcm,bcm58625-srab', 'brcm,bcm88312-srab']
'brcm,bcm5301x-srab' is not one of ['brcm,bcm3384-switch',
'brcm,bcm6328-switch', 'brcm,bcm6368-switch']
From schema:
Documentation/devicetree/bindings/net/dsa/b53.yaml
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The register name should be "sgmii_config", not "sgmii", this is not a
functional change since no code is currently looking for that register
by name (or at all).
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Update the switch unit name from srab to ethernet-switch, allowing us
to fix warnings such as:
CHECK arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dt.yaml
arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dt.yaml:
srab@18007000: $nodename:0: 'srab@18007000' does not match
'^(ethernet-)?switch(@.*)?$'
From schema:
Documentation/devicetree/bindings/net/dsa/b53.yaml
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Provide an empty 'ports' container node with the correct #address-cells
and #size-cells properties. This silences the following warning:
arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dt.yaml:
ethernet-switch@18007000: 'oneOf' conditional failed, one must be fixed:
'ports' is a required property
'ethernet-ports' is a required property
From schema:
Documentation/devicetree/bindings/net/dsa/b53.yaml
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Provide a default compatible string which is based on the 53011 SRAB
compatible by default. The 4709 and 47094 default to the 53012 SRAB
compatible.
This allows us to have sane defaults and silences the following
warnings:
arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dt.yaml:
ethernet-switch@18007000: compatible: 'oneOf' conditional failed, one
must be fixed:
['brcm,bcm5301x-srab'] is too short
'brcm,bcm5325' was expected
'brcm,bcm53115' was expected
'brcm,bcm53125' was expected
'brcm,bcm53128' was expected
'brcm,bcm5365' was expected
'brcm,bcm5395' was expected
'brcm,bcm5389' was expected
'brcm,bcm5397' was expected
'brcm,bcm5398' was expected
'brcm,bcm11360-srab' was expected
'brcm,bcm5301x-srab' is not one of ['brcm,bcm53010-srab',
'brcm,bcm53011-srab', 'brcm,bcm53012-srab', 'brcm,bcm53018-srab',
'brcm,bcm53019-srab']
'brcm,bcm5301x-srab' is not one of ['brcm,bcm11404-srab',
'brcm,bcm11407-srab', 'brcm,bcm11409-srab', 'brcm,bcm58310-srab',
'brcm,bcm58311-srab', 'brcm,bcm58313-srab']
'brcm,bcm5301x-srab' is not one of ['brcm,bcm58522-srab',
'brcm,bcm58523-srab', 'brcm,bcm58525-srab', 'brcm,bcm58622-srab',
'brcm,bcm58623-srab', 'brcm,bcm58625-srab', 'brcm,bcm88312-srab']
'brcm,bcm5301x-srab' is not one of ['brcm,bcm3384-switch',
'brcm,bcm6328-switch', 'brcm,bcm6368-switch']
From schema:
Documentation/devicetree/bindings/net/dsa/b53.yaml
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Update the switch unit name from srab to ethernet-switch, allowing us to
fix warnings such as:
CHECK arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dt.yaml
arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dt.yaml:
srab@18007000: $nodename:0: 'srab@18007000' does not match
'^(ethernet-)?switch(@.*)?$'
From schema:
Documentation/devicetree/bindings/net/dsa/b53.yaml
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Currently the GIC node in V3s DTSI follows some old DT examples, and
being broken. This leads a warning at boot.
Fix this.
Fixes: f989086ccb ("ARM: dts: sunxi: add dtsi file for V3s SoC")
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20201120050851.4123759-1-icenowy@aosc.io
The previous version of the dwc2 overlay set the RX FIFO size to
256 4-byte words. This is not enough for 1024 bytes of the largest
isochronous high speed packet allowed, because it doesn't take into
account extra space needed by dwc2.
RX FIFO's size is calculated based on the following (in 4byte words):
- 13 locations for SETUP packets
5*n + 8 for Slave and Buffer DMA mode where n is number of control
endpoints which is 1 on the bcm283x core
- 1 location for Global OUT NAK
- 2 * 257 locations for status information and the received packet.
Typically two spaces are recommended so that when the previous packet
is being transferred to AHB, the USB can receive the subsequent
packet.
- 10 * 1 location for transfer complete status for last packet of each
endpoint. The bcm283x core has 5 IN and 5 OUT EPs
- 10 * 1 additional location for EPDisable status for each endpoint
- 5 * 2 additional locations are recommended for each OUT endpoint
Total is 558 locations.
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/e9e7d070-593c-122f-3a5c-2435bb147ab2@ivitera.com/
The RPi4 WiFi chip and HDMI outputs have some frequency overlap with
crosstalk around 2.4GHz. Let's mark it as such so we can use some evasive
maneuvers.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20201029134018.1948636-3-maxime@cerno.tech
Add remaining PRM instances for the omap5 SoC. Additionally enable the
genpd support for them.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
Cc: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can now probe devices with device tree only configuration using
ti-sysc interconnect target module driver.
Cc: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add remaining PRM instances for the dra7 SoC. Additionally enable the
genpd support for them.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
Cc: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
Cc: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add remaining PRM instances for the omap4 SoC. Additionally enable the
genpd support for them.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
MAC0 was not functional in the AST2600A0 SoC. This has been resolved
with the A1, so allow use of this port on EVBs with the A1 and
subsequent revisions.
A0 EVBs will still boot with this change, but the first Ethernet device
will not be functional.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Some of the FSI-attached SPI controllers can't use the loop command
due to security requirements. Indicate this in the devicetree with
the restricted compatible string.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20201102194713.14812-1-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
According to the bosch,m_can.yaml bindings the first clock shall be the "hclk",
while the second clock "cclk".
This patch fixes the order accordingly.
Fixes: 0adbe832f2 ("ARM: dts: dra76x: Add MCAN node")
Cc: Faiz Abbas <faiz_abbas@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add device tree for the Kudo BMC. Kudo is an Ampere (Altra)
server platform manufactured by Fii and is based on a Nuvoton
NPCM730 SoC.
Signed-off-by: Mustatfa Shehabi <Mustafa.Shehabi@fii-na.com>
Signed-off-by: Mohaimen alsmarai <Mohaimen.alsamarai@fii-na.com>
Signed-off-by: Lancelot Kao <lancelot.kao@fii-usa.com>
Reviewed-by: Vivekanand Veeracholan <vveerach@google.com>
Reviewed-by: Benjamin Fair <benjaminfair@google.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20201116232127.7066-1-lancelot.kao@fii-usa.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
The Quanta GSJ BMC uses the Nuvoton NPCM730 SoC.
Included features:
1. Image partitions
2. PWM fan controller
3. USB device
4. Serial port
5. FIU
6. LEDs and GPIOs
Signed-off-by: Fran Hsu <Fran.Hsu@quantatw.com>
Reviewed-by: Benjamin Fair <benjaminfair@google.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add pinctrl definition for the Quanta GSJ BMC machine.
Signed-off-by: Fran Hsu <Fran.Hsu@quantatw.com>
Reviewed-by: Benjamin Fair <benjaminfair@google.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
The Nuvoton NPCN730 SoC is a part of the Nuvoton NPCM7xx SoCs family.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reserve a 1.5MiB region of memory to record kmsg dumps, console and
userspace message state into 16kiB ring-buffer slots. The sizing allows
for up to 16 dumps to be captured and read out.
Set max-reason to KMSG_DUMP_EMERG to capture bad-path reboots.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20201022014731.2035438-7-andrew@aj.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reserve a 1.5MiB region of memory to record kmsg dumps, console and
userspace message state into 16kiB ring-buffer slots. The sizing allows
for up to 16 dumps to be captured and read out.
Set max-reason to KMSG_DUMP_EMERG to capture bad-path reboots.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20201022014731.2035438-6-andrew@aj.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
The mismatch lead to a miscalculation of regions in another patch, and
shouldn't be mismatched anyway, so make them consistent.
Fixes: 575640201e ("ARM: dts: aspeed: tacoma: Use 64MB for firmware memory")
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20201022014731.2035438-2-andrew@aj.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
This driver uses GPIO descriptors to drive the touchscreen RESET line. In
the existing device trees this has in conflict with intution been flagged
as GPIO_ACTIVE_HIGH and the driver then applies the reverse action by
driving the line low (setting to 0) to enter reset state and driving the
line high (setting to 1) to get out of reset state.
The correct way to handle active low GPIO lines is to provide the
GPIO_ACTIVE_LOW in the device tree (thus properly describing the hardware)
and letting the GPIO framework invert the assertion (driving high) to a
low level and vice versa.
This is considered a bug since the device trees are incorrectly
mis-specifying the line as active high.
Fix the driver and all device trees specifying a reset line.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Philippe Schenker <philippe.schenker@toradex.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201104153032.1387747-1-linus.walleij@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This property is only useful if a node has children as it allows them
to then use io-channel properties in the parent. Here there are no
children.
This is harmless, but we are planning to shortly drop this property
as it is rarely used correctly and there is little reason it would
ever be needed as we can just provide the io-channels property to
any child nodes that need it.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20201115192951.1073632-8-jic23@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
This property is relevant to consumers of io-channels. Here it is
used by a provider.
dt-schema will now report and error as this property must be in the
same node as io-channels and it is not here.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20201115192951.1073632-6-jic23@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
This property is only relevant to consumers of io-channels, not providers.
All these dtsi files have it alongside #io-channel-cells which indicates
they are providers of io-channels, not consumers.
Note that dt-schema will now flag this up due to a dependency between
this property and io-channels.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20201115192951.1073632-5-jic23@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add a device-tree for the Rainier 4U system. Change the model name
on the existing Rainier device-tree to 2U, and remove the two
extra power supplies that are only present on the 4U system. Also
add labels to the fan nodes for use in the 4U device-tree.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20201028185647.14565-1-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add bindings for the KS8851 ethernet present on the STM32MP1 DHCOM SoM.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Add another mux option for FMC EBI bus, this is used on DHCOM SoM
for the second ethernet and on the PDK2 devkit for SRAM.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
On the production DHCOM STM32MP15xx SoM, the PHY IRQ line is connected
to the PI11 pin. Describe it in the DT as well, so the PHY IRQ can be
used e.g. to detect cable insertion and removal.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Modify NPCM7xx device tree timer register size
from 0x50 to 0x1C to control only the timer registers
and not other hw modules.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20200929131807.15378-3-tmaimon77@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Modify NPCM7xx device tree clock parameter to clock constants that
define at include/dt-bindings/clock/nuvoton,npcm7xx-clock.h file.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20200929131807.15378-2-tmaimon77@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
The P4 Note family contains a couple of variants of the Galaxy Note 10.1
tablet with mainly different modems. The GT-N8010/GT-N8013 is the WiFi
only version.
Signed-off-by: Martin Jücker <martin.juecker@gmail.com>
Link: https://lore.kernel.org/r/20201113212525.13455-3-martin.juecker@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
- Fix MDIO over clocking on vf610-zii-dev-rev-b board to get switch
device work reliably.
- Fix imx50-evk IOMUX for the chip select 1 to use GPIO4_13 instead of
the native CSPI_SSI function.
- Fix voltage for 1.6GHz CPU operating point on i.MX8MM to match
hardware datasheet.
- Fix phy-mode for KSZ9031 PHY on imx6qdl-udoo board.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl+yQKUUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7dVgf1GkIY1GbPIvkMZB3CiQZ0e40vUmWx
CW70bOrGAcSSgYvL7tBqb7I5U5+01m4whtsal6jK/TTZ4w2PAItZpgi3ZiXooyO9
3qGHr7IgcuCWzQ2Bjg+YGR1esGTi2+KKggCWog0R8ipy5gUCvIcuLNyBtxjlkbKt
1kkxEDOdmeXPAUQboEdRPZF4m6J/q8g/QgY8GeLsPeContEvAXBMMdNgIRHmWZ6H
iu3H33ogseBkm5RvSfdjmTKPnz9/5hF94yEpGgTkWrawq2bMXwt7loBsQl/TyUVg
d01gZl5yOxjtMXcnJ5bW+6SOpPbjUBFczg1+C2u2tDpeES5DjjYLS0fb
=zT+s
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-5.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.10, round 4:
- Fix MDIO over clocking on vf610-zii-dev-rev-b board to get switch
device work reliably.
- Fix imx50-evk IOMUX for the chip select 1 to use GPIO4_13 instead of
the native CSPI_SSI function.
- Fix voltage for 1.6GHz CPU operating point on i.MX8MM to match
hardware datasheet.
- Fix phy-mode for KSZ9031 PHY on imx6qdl-udoo board.
* tag 'imx-fixes-5.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx50-evk: Fix the chip select 1 IOMUX
arm64: dts: imx8mm: fix voltage for 1.6GHz CPU operating point
ARM: dts: vf610-zii-dev-rev-b: Fix MDIO over clocking
arm: dts: imx6qdl-udoo: fix rgmii phy-mode for ksz9031 phy
Link: https://lore.kernel.org/r/20201116090702.GM5849@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
According to AM335x datasheet pin AM335X_PIN_GPMC_WPN in MODE7 works as
GPIO0[31].
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This enables the Enhanced Quadrature Encoder Pulse (eQEP) module for
connectors E1, E2 and E3 on BeagleBone Blue.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This adds new nodes for the Texas Instruments Enhanced Quadrature
Encoder Pulse (eQEP) module in the PWM subsystem on AM33XX.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
DRA7 SoC has two SHA instances, add the missing second one under the
main dts file.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
In preparation for probing l3 with simple-pm-bus and genpd, we must move
l3 noc to a separate node to prevent omap_l3_noc.c driver from claiming
the whole l3 instance before simple-pm-bus has a chance to probe.
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
Note that we need to use "ti,no-idle" here.
Cc: Dave Gerlach <d-gerlach@ti.com>
Cc: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
Cc: Dave Gerlach <d-gerlach@ti.com>
Cc: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
As we're just dropping data, and the early platform data init
is based on the custom ti,hwmods property, we want to drop both
the platform data and ti,hwmods property in a single patch.
Cc: Dave Gerlach <d-gerlach@ti.com>
Cc: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can now probe devices with device tree only configuration using
ti-sysc interconnect target module driver.
Note that we no longer need ti,no-reset-on-init as the rstctrl resets
are properly handled by the reset driver and claimed by the RTC driver.
And we need to squash together the module ranges for driver compability.
Cc: Dave Gerlach <d-gerlach@ti.com>
Cc: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
For genpd we need the RTC powerdomain configured.
Cc: Dave Gerlach <d-gerlach@ti.com>
Cc: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
To drop the legacy platform data for am3 control module, we need
to configure the missing functional clock and tag the module to
not idle as platform data also had it configured with
HWMOD_INIT_NO_IDLE.
Signed-off-by: Tony Lindgren <tony@atomide.com>
We now manage clocksource and clockevent clocks directly with
timer-ti-dm-systimer. In order to use genpd with prm_omap,
GENPD_FLAG_PM_CLK and simple-pm-bus, we need to keep the system
timer related interconnect clocks enabled until clocksource suspend
is done.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add remaining PRM instances for the am43xx SoC. Additionally enable the
genpd support for them.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
As we're just dropping data, and the early platform data init
is based on the custom ti,hwmods property, we want to drop both
the platform data and ti,hwmods property in a single patch.
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
Note that we need to use "ti,no-idle" here.
Cc: Dave Gerlach <d-gerlach@ti.com>
Cc: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
Cc: Dave Gerlach <d-gerlach@ti.com>
Cc: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
As we're just dropping data, and the early platform data init
is based on the custom ti,hwmods property, we want to drop both
the platform data and ti,hwmods property in a single patch.
Cc: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
As we're just dropping data, and the early platform data init
is based on the custom ti,hwmods property, we want to drop both
the platform data and ti,hwmods property in a single patch.
Cc: Dave Gerlach <d-gerlach@ti.com>
Cc: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can now probe devices with device tree only configuration using
ti-sysc interconnect target module driver.
Note that we no longer need ti,no-reset-on-init as the rstctrl resets
are properly handled by the reset driver and claimed by the RTC driver.
And we need to squash together the module ranges for driver compability.
Cc: Dave Gerlach <d-gerlach@ti.com>
Cc: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
For genpd we need the RTC powerdomain configured.
Cc: Dave Gerlach <d-gerlach@ti.com>
Cc: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
To drop the legacy platform data for am3 control module, we need
to configure the missing functional clock and tag the module to
not idle as platform data also had it configured with
HWMOD_INIT_NO_IDLE.
Signed-off-by: Tony Lindgren <tony@atomide.com>
We now manage clocksource and clockevent clocks directly with
timer-ti-dm-systimer. In order to use genpd with prm_omap,
GENPD_FLAG_PM_CLK and simple-pm-bus, we need to keep the system
timer related interconnect clocks enabled until clocksource suspend
is done.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add remaining PRM instances for the am33xx SoC. Additionally, enable the
genpd support for them.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
[tony@atomide.com: fixed a typo for #power-domain-cells]
Signed-off-by: Tony Lindgren <tony@atomide.com>
The Kobo Aura has an eKTF2132 touchscreen controller.
Although the vendor kernel toggles a reset pin (GPIO5-12) during the
startup sequence, the touchscreen works without it.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Change i.MX SoCs nand node name from "flexcan" to "can" to be compliant with
yaml schema, it requires the nodename to be "can". This fixes the following
error found by dtbs_check:
arch/arm/boot/dts/imx6dl-apf6dev.dt.yaml: flexcan@2090000: $nodename:0: 'flexcan@2090000' does not match '^can(@.*)?$'
From schema: Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
There are four flavors of TechNexion PICO-IMX6 boards. They have their
own DTSes, even though in Dwarf, Nymph and Pi are exactly the same.
They also have their own bindings so adjust the compatibles to match the
bindings.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Tioga Pass reference design includes Intel I210 Ethernet controller
connected to the BMC with NC/SI.
MAC readout is not supported.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-by: Vijay Khemka <vijaykhemkalinux@gmail.com>
Tested-by: Vijay Khemka <vijaykhemkalinux@gmail.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Create all the i2c switches in device tree and use aliases to assign
child channels with consistent bus numbers.
Besides, "i2c-mux-idle-disconnect" is set for all the i2c switches to
avoid potential conflicts when multiple devices (beind the switches) use
the same device address.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20201110072446.8218-1-rentao.bupt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Update "data0" partition's size from 8MB to 4MB to fix "partition data0
extends beyond the end of device" warning at bootup time.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20201110072159.7941-1-rentao.bupt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
This property applies to consumers of io-channels. In this case we
have a provider so the property is not used.
Recent changes to dt-schema result int his being reported as an error
as a dependency is enforced between this property and io-channels.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This device has a functional USB 3 port so PHY is required.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This reverts commit eaf2d2f689.
The commit eaf2d2f689 ("ARM: dts: exynos: add input clock to CMU in
Exynos4412 Odroid") breaks probing of usb3503 USB hub on Odroid U3.
It changes the order of clock drivers probe: the clkout (Exynos PMU)
driver is probed before the main clk-exynos4 driver. The clkout driver
on Exynos4412 depends on clk-exynos4 but it does not support deferred
probe, therefore this dependency and changed probe order causes probe
failure.
The usb3503 USB hub on Odroid U3 on the other hand requires clkout
clock. This can be seen in logs:
[ 5.007442] usb3503 0-0008: unable to request refclk (-517)
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200921174818.15525-1-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- A series from Krzysztof Kozlowski to fix missing PMIC's interrupt
line pull-up for i.MX8MM and i.MX8MN boards.
- Set Bluetooth chip max-speed to 4000000 on imx8mm-beacon-som board
to fix the choppy Bluetooth audio sound.
- Remove non-existent OTG2, usbphynop2, and the usbmisc2 from i.MX8MN
device tree.
- Fix the endianness setting of RCPM node on Layerscape SoCs.
- Add the missing dma-coherent property for qoriq-fman device to improve
the performance.
- Fix the Ethernet PHY address on imx6q-prti6q board.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl+fStkUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM6UJggAgRnnMfVrvpZqZSYlj3CirW4jOeeo
oxkh8L3XcvOh5f1StI15879a93E5fq4CLoVUda5vdWJLO8Q0pl5VGJsTfzNpekAY
mswq8ratwKragLOX8FhSr/YLICoF6qLmIDn0EtAuOwLrcii4i5pgLqj0t/5MQm9U
NyAbb/nYZWWm2S8szOaB6+OfYbXxV9YHMFkFL9ZetppS/ezYq3UNq2i//aTBB33z
wFhqt8+scuT3cikdtFumb+vbMMYtUcGfJxkgLEoQz3P53WL1w0jzJXQ47egWI6/d
16zEUavTk9WUKcWS8knY8KKToVaU6GKIr+JLUOczWOhMPUtxANsLvLOmjQ==
=M32F
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.10, 3rd round:
- A series from Krzysztof Kozlowski to fix missing PMIC's interrupt
line pull-up for i.MX8MM and i.MX8MN boards.
- Set Bluetooth chip max-speed to 4000000 on imx8mm-beacon-som board
to fix the choppy Bluetooth audio sound.
- Remove non-existent OTG2, usbphynop2, and the usbmisc2 from i.MX8MN
device tree.
- Fix the endianness setting of RCPM node on Layerscape SoCs.
- Add the missing dma-coherent property for qoriq-fman device to improve
the performance.
- Fix the Ethernet PHY address on imx6q-prti6q board.
* tag 'imx-fixes-5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx6q-prti6q: fix PHY address
arm64: dts imx8mn: Remove non-existent USB OTG2
arm64: dts: imx8mm-beacon-som: Fix Choppy BT audio
arm64: dts: fsl: DPAA FMan DMA operations are coherent
arm64: dts: fsl: fix endianness issue of rcpm
arm64: dts: imx8mn-evk: fix missing PMIC's interrupt line pull-up
arm64: dts: imx8mn-ddr4-evk: fix missing PMIC's interrupt line pull-up
arm64: dts: imx8mn-var-som: fix missing PMIC's interrupt line pull-up
arm64: dts: imx8mm-evk: fix missing PMIC's interrupt line pull-up
arm64: dts: imx8mm-beacon-som: fix missing PMIC's interrupt line pull-up
arm64: dts: imx8mm-var-som: fix missing PMIC's interrupt line pull-up
Link: https://lore.kernel.org/r/20201030151821.GA28266@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add initial version of device tree for Facebook Galaxy100 (AST2400) BMC.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20201111232330.30843-5-rentao.bupt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Simplify the Wedge100 device tree by using the common dtsi.
In addition this enables the second firmware flash, and turns on the
"i2c-mux-idle-disconnect" flag for I2C switch 7-0070.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20201111232330.30843-4-rentao.bupt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Simplify the Wedge40 device tree by using the common dtsi.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20201111232330.30843-3-rentao.bupt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
This common descirption is included by all Facebook AST2400 Network BMC
platforms to minimize duplicated device entries across Facebook Network
BMC device trees.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20201111232330.30843-2-rentao.bupt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Clocks and thermal blocks are part of the CRU ("Clock and Reset Unit" or
"Central Resource Unit").
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Now that we have a pin controller, use that instead of manuplating the
mdio/mdc pins directly. i.e. we no longer require the mdio-mii-mux
Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
BCM47094 version of pinmux uses different compatible and supports MDIO
pinmux pins. Hence, use the correct compatible string and defines the
MDIO pins group.
Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This router has dual paritions to store trx firmware image and
dual partitions for nvram. The second one in each of these cases acts
as a backup store.
When tested with OpenWrt, the default partition parser causes two issues:
1. It labels both nvram partitions as nvram. In factory, second one is
labeled devinfo.
2. It parses second trx image and tries to create second 'linux' partition
and fails with - cannot create duplicate 'linux' partition
The following patch works around both of these issues.
Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
In accordance with the Generic xHCI bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "generic-xhci"-compatible nodes are
correctly named.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
In accordance with the Generic EHCI/OHCI bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "generic-ehci" and "generic-ohci"-compatible
nodes are correctly named.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Add ports 5 and 7 which are connected to gmac cores 1 & 2.
These will be disabled for now.
Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Add GPIO line names for AMD EthanolX customer reference board.
It populates AST2500 GPIO lines (A0-A7 to AC0-AC7) with AMD EthanolX
designated names.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Supreeth Venkatesh <supreeth.venkatesh@amd.com>
Link: https://lore.kernel.org/r/20201111132133.1253-1-aladyshev22@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Use hyphens instead of underscores in the MFC reserved memory node names
which is expected by naming convention, multiple dtschema files and
pointed out by dtc W=2 builds.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201105184506.215648-5-krzk@kernel.org
Use hyphens instead of underscores in the Exynos5250 and Exynos542x node
names which is expected by naming convention, multiple dtschema files
and pointed out by dtc W=2 builds.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201105184506.215648-4-krzk@kernel.org
Use hyphens instead of underscores in the Exynos4210 and Exynos4412 node
names which is expected by naming convention, multiple dtschema files
and pointed out by dtc W=2 builds. Use also generic "ppmu" node name
for PPMU nodes to match Devicetree specification.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201105184506.215648-2-krzk@kernel.org
Use hyphens instead of underscores in the Exynos3250 node names which is
expected by naming convention, multiple dtschema files and pointed out
by dtc W=2 builds. Use also generic "ppmu" node name for PPMU nodes to
match Devicetree specification.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201105184506.215648-1-krzk@kernel.org
This patch adds an 'interconnects' property to Exynos4412 DTS in order to
declare the interconnect path used by the mixer. Please note that the
'interconnect-names' property is not needed when there is only one path in
'interconnects', in which case calling of_icc_get() with a NULL name simply
returns the right path.
Signed-off-by: Artur Świgoń <a.swigon@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20201104103657.18007-7-s.nawrocki@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
This patch adds the following properties for Exynos4412 interconnect
bus nodes:
- interconnects: to declare connections between nodes in order to
guarantee PM QoS requirements between nodes,
- #interconnect-cells: required by the interconnect framework,
- samsung,data-clk-ratio: which allows to specify minimum data clock
frequency corresponding to requested bandwidth for each bus.
Note that #interconnect-cells is always zero and node IDs are not
hardcoded anywhere.
Signed-off-by: Artur Świgoń <a.swigon@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20201104103657.18007-6-s.nawrocki@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add section for kionix kxtf9.
Signed-off-by: Carl Philipp Klemm <philipp@uvos.xyz>
[tony@atomide.com: removed extra header from description]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Remove xt894 specific things from motorola-mapphone-common.dtsi and add
them to omap4-droid4-xt894.dts and omap4-droid-bionic-xt875.dts as
applicable.
Signed-off-by: Carl Philipp Klemm <philipp@uvos.xyz>
[tony@atomide.com: shortened subject, wrapped description]
Signed-off-by: Tony Lindgren <tony@atomide.com>
The node names for devices using the pwm-leds driver follow a certain
naming scheme (now). Parent node name is not enforced, but recommended
by DT project.
DTC arch/arm/boot/dts/omap3-beagle-xm.dt.yaml
CHECK arch/arm/boot/dts/omap3-beagle-xm.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-beagle-xm.dt.yaml: pwmleds: 'pmu_stat' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-beagle-xm-ab.dt.yaml
CHECK arch/arm/boot/dts/omap3-beagle-xm-ab.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-beagle-xm-ab.dt.yaml: pwmleds: 'pmu_stat' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-alto35.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-alto35.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-alto35.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-chestnut43.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-chestnut43.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-chestnut43.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-gallop43.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-gallop43.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-gallop43.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-palo35.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-palo35.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-palo35.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-palo43.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-palo43.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-palo43.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-storm-alto35.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-storm-alto35.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-storm-alto35.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-storm-chestnut43.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-storm-chestnut43.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-storm-gallop43.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-storm-gallop43.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-storm-gallop43.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-storm-palo35.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-storm-palo35.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-storm-palo35.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-storm-palo43.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-storm-palo43.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-storm-palo43.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-storm-summit.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-storm-summit.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-storm-summit.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-storm-tobi.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-storm-tobi.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-storm-tobi.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-storm-tobiduo.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-storm-tobiduo.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-summit.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-summit.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-summit.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-tobi.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-tobi.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-tobi.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-tobiduo.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-tobiduo.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-tobiduo.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap4-kc1.dt.yaml
CHECK arch/arm/boot/dts/omap4-kc1.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap4-kc1.dt.yaml: pwmleds: 'green', 'orange' do not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap4-sdp.dt.yaml
CHECK arch/arm/boot/dts/omap4-sdp.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap4-sdp.dt.yaml: pwmleds: 'charging', 'kpad' do not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap4-sdp-es23plus.dt.yaml
CHECK arch/arm/boot/dts/omap4-sdp-es23plus.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap4-sdp-es23plus.dt.yaml: pwmleds: 'charging', 'kpad' do not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
In accordance with the DWC USB3 bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly
named.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Syonpsys IP cores are supposed to be defined with "snps" vendor-prefix.
Use it instead of the deprecated "synopsys" one.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The wl271 bluetooth uart is connected to uart2.
Setup a serdev uart child and separate bluetooth and uart2 pinmux
from wl12xx pinmux to better group the pins and muxes.
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The pinmux control register offset passed to OMAP4_IOPAD is odd.
Fixes: ab9a13665e ("ARM: dts: pandaboard: add gpio user button")
Cc: stable@vger.kernel.org
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The SPI chip selects are represented as:
cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>, <&gpio4 13 GPIO_ACTIVE_LOW>;
, which means that they are used in GPIO function instead of native
SPI mode.
Fix the IOMUX for the chip select 1 to use GPIO4_13 instead of
the native CSPI_SSI function.
Fixes: c605cbf5e1 ("ARM: dts: imx: add device tree support for Freescale imx50evk board")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Van der Laan LANMCU is a module for the food storage rooms to control
proper gas composition.
Co-developed-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Altesco (Altus-Escon-Company BV) I6P is a part of the diagnostic system
for the vehicle inspection stations.
Co-developed-by: David Jander <david@protonic.nl>
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Mark the STMPE resistive touch controller as a wakeup-source.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The PHYTEC PEB-AV-02 adapter adds the capability to connect a parallel
LCD display to the phyBOARD-Segin full featured, either with capacitive
or resistive touch.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add a PHYTEC phyBOARD-Segin full featured with phyCORE-i.MX 6UL with
eMMC and following features:
- i.MX 6UL
- 512 MB RAM
- eMMC
- USB Host/OTG
- 2x 100 Mbit/s Ethernet
- RS232
- CAN
Signed-off-by: Yunus Bas <y.bas@phytec.de>
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The VDDA LDO1 PMIC output supplies the analog VDDA input of the
STM32MP1 on DHCOM, keep it always on, otherwise there could be
leakage through the SoC.
Fixes: 34e0c7847d ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
The VIO regulator is supplied by PMIC Buck3, describe this in the DT.
Fixes: 34e0c7847d ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
On the prototype DHCOM, the LED5 was connected to pin PG2 of the
STM32MP15xx, however on the production SoM this was changed to pin
PC6. Update the connection in the DT.
Fixes: 81d5fc7197 ("ARM: dts: stm32: Add GPIO LEDs for STM32MP1 DHCOM PDK2")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
On the prototype DHCOM, the TA3-GPIO-C button was connected to pin PI11 of
the STM32MP15xx, however on the production SoM this was changed to pin PG0
to free up the IRQ line 11 for LAN8710i PHY IRQ. Update the connection in
the DT. Since the IRQ line 0 is used for PMIC as well and cannot be shared
with the button, make the button polled.
Fixes: 87cabf9405 ("ARM: dts: stm32: Add GPIO keys for STM32MP1 DHCOM PDK2")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Rename the DSI controller nodes from "dsi-controller@"
to "dsi@" so they match the naming convention in the
YAML schema for DSI controllers.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20201104133758.1373298-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The NanoPi R1 is a complete open source board developed
by FriendlyElec for makers, hobbyists, fans and etc.
NanoPi R1 key features
- Allwinner H3, Quad-core Cortex-A7@1.2GHz
- 512MB/1GB DDR3 RAM
- 8GB eMMC
- microSD slot
- 10/100/1000M Ethernet x 1
- 10/100 Ethernet x 1
- Wifi 802.11b/g/n
- Bluetooth 4.0
- Serial Debug Port
- 5V 2A DC power-supply
Signed-off-by: Yu-Tung Chang <mtwget@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20201102100157.85801-2-mtwget@gmail.com
The Elimo Engineering Initium is an Open Source Hardware Single Board
Computer based on the Elimo Impetus SoM.
It is meant as the first development platform for the Impetus, providing
convenient access to the peripherals on the Impetus.
It provides:
USB-C power input
UART-to-USB bridge on the USB-C connector, connected to UART1
USB-A connector for USB2.0 (Host, Device, OTG)
Audio Line In/Out
Pin header to access all signals on the M2 connector of the SoM
Signed-off-by: Matteo Scordino <matteo.scordino@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20201105183231.12952-4-matteo.scordino@gmail.com
The Elimo Engineering Impetus is an Open Source Hardware System-on-Module
based on the SoChip S3 SoC.
It is meant for integration into carrier boards or, more generally,
larger designs, and uses an M2 connector to facilitate that.
Interfaces on the M.2/NGFF 42mm connector:
WiFi IEEE 802. 11abgn (on-module Realtek)
Bluetooth 4.2/BLE (on-module Realtek)
RGB LCD Interface (on-module connector)
MIPI Camera Interface (on-module connector)
IEEE 802. 3u Ethernet MAC (external connecto)
USB2.0 (Host, Device, OTG) (external connector)
Audio Line In/Out (external connector)
Signed-off-by: Matteo Scordino <matteo.scordino@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20201105183231.12952-2-matteo.scordino@gmail.com
Add a placeholder for a MAC address. A bootloader may fill it
to set the MAC address and override EEPROM settings.
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Link: https://lore.kernel.org/r/20201001135254.28178-1-l.stelmach@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add Ethernet interface description for Odroid X/X2.
Add an alias to enable bootloaders to find the Ethernet interface
and assign a MAC address.
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Link: https://lore.kernel.org/r/20201103184412.18874-7-l.stelmach@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add Ethernet interface description for Odroid U3.
Add an alias to enable bootloaders to find the Ethernet interface
and assign a MAC address.
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Link: https://lore.kernel.org/r/20201103184412.18874-6-l.stelmach@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add Ethernet interface description for Odroid XU.
Add an alias to enable bootloaders to find the Ethernet interface
and assign a MAC address.
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Link: https://lore.kernel.org/r/20201103184412.18874-5-l.stelmach@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add Ethernet interface description for Odroid XU3 Lite.
Add an alias to enable bootloaders to find the Ethernet interface
and assign a MAC address.
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Link: https://lore.kernel.org/r/20201103184412.18874-4-l.stelmach@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
MicroUSB port on OdroidU3+ boards can operate both as peripheral or as
host port. Till now it was configured as pheriperal only port, but it
turned out that the DWC2 driver code already handles everything needed to
support USB role-switch, so switch it to dual-role (OTG) mode. This has
no effect on OdroidU3 (without 'plus') and OdroidX2, which doesn't have
USB needed ID pin and VBUS wiring. Those will still operate correctly in
pheriperal mode only.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Link: https://lore.kernel.org/r/20201103140214.21690-1-m.szyprowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
i.MX pinctrl group nodes should have names that ends with 'grp'.
Reported-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add usb alias for bootloader searching the controller in correct order.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
DCDC1 regulator powers many different subsystems. While some of them can
work at 3.0 V, some of them can not. For example, VCC-HDMI can only work
between 3.24 V and 3.36 V. According to OS images provided by the board
manufacturer this regulator should be set to 3.3 V.
Set DCDC1 and DCDC1SW to 3.3 V in order to fix this.
Fixes: 23edc168bd ("ARM: dts: sun8i: Add board dts file for Banana Pi M2 Berry")
Fixes: 27e81e1970 ("ARM: dts: sun8i: v40: bananapi-m2-berry: Enable GMAC ethernet controller")
Signed-off-by: Pablo Greco <pgreco@centosproject.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/1604326755-39742-1-git-send-email-pgreco@centosproject.org
The Ethernet PHY on the Bananapi M1 has the RX and TX delays enabled on
the PHY, using pull-ups on the RXDLY and TXDLY pins.
Fix the phy-mode description to correct reflect this so that the
implementation doesn't reconfigure the delays incorrectly. This
happened with commit bbc4d71d63 ("net: phy: realtek: fix rtl8211e
rx/tx delay config").
Fixes: 8a5b272fbf ("ARM: dts: sun7i: Add Banana Pi board")
Signed-off-by: Pablo Greco <pgreco@centosproject.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/1604326600-39544-1-git-send-email-pgreco@centosproject.org
Enable the USB 2.0 Virtual Hub Controller and
the Video Engine with it's reserved memory region for the implementation
of the iKVM functionality in the BMC.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Supreeth Venkatesh <supreeth.venkatesh@amd.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20201027123722.2935-3-aladyshev22@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
The KCS interface on the LPC channel 3 in the controller
is used for the in-band BMC<->BIOS IPMI communication.
0xCA2 is a default host CPU LPC IO address for this
interface.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Supreeth Venkatesh <supreeth.venkatesh@amd.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20201027123722.2935-2-aladyshev22@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
I2C1 can be exposed through PB pins in addition to PE pins on the V3s.
Add the device-tree description for these pins.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20201031182137.1879521-4-contact@paulk.fr
The compatible string in the Pine64 Pinecube dts diverges from the ones
used in other S3 based boards, like the LicheePi and the Elimo Impetus
and Initium. Discussion on LKML decided the PineCube should align to the
others.
Signed-off-by: Matteo Scordino <matteo.scordino@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20201030234325.5865-7-matteo.scordino@gmail.com
The Allwinner V3 and S3 can use PG6/7 as RX/TX for UART1. Since no other
functions are assigned to those pins, they are a convenient choice for
a debugging or application UART.
This is specific to V3/S3 as the V3s's non-BGA package did not have
those pins.
Signed-off-by: Matteo Scordino <matteo.scordino@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20201030234325.5865-3-matteo.scordino@gmail.com
Removed vuart for facebook tiogapass platform as it uses uart2 and
uart3 pin with aspeed uart routing feature.
Signed-off-by: Vijay Khemka <vijaykhemka@fb.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Fixes: ffdbf49482 ("ARM: dts: aspeed: tiogapass: Enable VUART")
Link: https://lore.kernel.org/r/20200813190431.3331026-1-vijaykhemka@fb.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Due to bug in the bootloader, the PHY has floating address and may
randomly change on each PHY reset. To avoid it, the updated bootloader
with the following patch[0] should be used:
| ARM: protonic: disable on-die termination to fix PHY bootstrapping
|
| If on-die termination is enabled, the RXC pin of iMX6 will be pulled
| high. Since we already have an 10K pull-down on board, the RXC level on
| PHY reset will be ~800mV, which is mostly interpreted as 1. On some
| reboots we get 0 instead and kernel can't detect the PHY properly.
|
| Since the default 0x020e07ac value is 0, it is sufficient to remove this
| entry from the affected imxcfg files.
|
| Since we get stable 0 on pin PHYADDR[2], the PHY address is changed from
| 4 to 0.
With latest bootloader update, the PHY address will be fixed to "0".
[0] https://git.pengutronix.de/cgit/barebox/commit/?id=93f7dcf631edfcda19e7757b28d66017ea274b81
Fixes: 0d446a5055 ("ARM: dts: add Protonic PRTI6Q board")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The ZII devel B board has two generations of Marvell Switches. The
mv88e6352 supports an MDIO clock of 12MHz. However the older 88e6185
does not like 12MHz, and often fails to probe.
Reduce the clock speed to 5MHz, which seems to work reliably.
Cc: Chris Healy <cphealy@gmail.com>
Fixes: b955387667 ("ARM: dts: ZII: update MDIO speed and preamble")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Chris Healy <cphealy@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The extra 0 only adds one point in the userspace visible range,
so this change is almost a noop with the current driver behavior.
We don't need the 0% point, userspace seems to handle this just fine
because it uses the bl_power property to turn off the display.
Furthermore after adding "backlight: pwm_bl: Fix interpolation" patch,
the backlight interpolation will work a little differently. So we need
to preemptively remove the 0-3 segment since otherwise we would have a
252 long interpolation that would slowly go between 0 and 3, looking
really bad in userspace. So it's almost a noop/cleanup now, but it will
be required in the future.
Signed-off-by: Alexandru Stan <amstan@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20201021220404.v3.1.I96b8d872ec51171f19274e43e96cadc092881271@changeid
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
After this patch we need 2 arguments less for the fsl,stop-mode
property:
| commit d9b081e3fc
| Author: Marc Kleine-Budde <mkl@pengutronix.de>
| Date: Sun Jun 14 21:09:20 2020 +0200
|
| can: flexcan: remove ack_grp and ack_bit handling from driver
|
| Since commit:
|
| 048e3a34a2 can: flexcan: poll MCR_LPM_ACK instead of GPR ACK for stop mode acknowledgment
|
| the driver polls the IP core's internal bit MCR[LPM_ACK] as stop mode
| acknowledge and not the acknowledgment on chip level.
|
| This means the 4th and 5th value of the property "fsl,stop-mode" isn't used
| anymore. This patch removes the used "ack_gpr" and "ack_bit" from the driver.
This patch removes the two last arguments, as they are not needed
anymore.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The node names for devices using the pwm-leds driver follow a certain
naming scheme (now). Parent node name is not enforced, but recommended
by DT project.
DTC arch/arm/boot/dts/imx53-ppd.dt.yaml
CHECK arch/arm/boot/dts/imx53-ppd.dt.yaml
arch/arm/boot/dts/imx53-ppd.dt.yaml: leds-brightness: 'alarm-brightness' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/imx6dl-cubox-i.dt.yaml
CHECK arch/arm/boot/dts/imx6dl-cubox-i.dt.yaml
arch/arm/boot/dts/imx6dl-cubox-i.dt.yaml: pwmleds: 'front' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/imx6dl-cubox-i-emmc-som-v15.dt.yaml
CHECK arch/arm/boot/dts/imx6dl-cubox-i-emmc-som-v15.dt.yaml
arch/arm/boot/dts/imx6dl-cubox-i-emmc-som-v15.dt.yaml: pwmleds: 'front' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/imx6dl-cubox-i-som-v15.dt.yaml
CHECK arch/arm/boot/dts/imx6dl-cubox-i-som-v15.dt.yaml
arch/arm/boot/dts/imx6dl-cubox-i-som-v15.dt.yaml: pwmleds: 'front' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/imx6sx-softing-vining-2000.dt.yaml
CHECK arch/arm/boot/dts/imx6sx-softing-vining-2000.dt.yaml
arch/arm/boot/dts/imx6sx-softing-vining-2000.dt.yaml: pwmleds: 'blue', 'green', 'red' do not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/leds/leds-pwm.yaml
Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The WaRP7 board (Wearable Development Platform) was apparently made by
Element14, not by "Warp". Correct the vendor in compatible to reflect
this. The compatibles were not documented in the bindings before.
Link: https://www.element14.com/community/docs/DOC-79058
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The WaRP board (Wearable Development Platform) was apparently made by
Revolution Robotics, Inc (brand: Revotics), not by "Warp". Correct the
vendor in compatible to reflect this. The compatibles were not
documented in the bindings before.
Link: https://revotics.com/warp
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Aristainetos and Aristainetos2 boards have only SoC compatible.
Cc: Heiko Schocher <hs@denx.de>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
There are four flavors of TechNexion PICO-IMX6 boards. They have their
own DTSes, even though in Dwarf, Nymph and Pi are exactly the same.
They also have their own bindings so adjust the compatibles to match the
bindings.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The dtschema expects watchdog device node name to be "watchdog":
arch/arm/boot/dts/vf500-colibri-eval-v3.dt.yaml: wdog@4003e000:
$nodename:0: 'wdog@4003e000' does not match '^watchdog(@.*|-[0-9a-f])?$'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The dtschema expects watchdog device node name to be "watchdog":
arch/arm/boot/dts/imx31-bug.dt.yaml: wdog@53fdc000:
$nodename:0: 'wdog@53fdc000' does not match '^watchdog(@.*|-[0-9a-f])?$'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Devicetree specification expects device node names to have a generic
name, representing the class of a device. Also the convention for node
names is to use hyphens, not underscores.
No functional changes.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201027170947.132725-10-krzk@kernel.org
The Devicetree specification expects device node names to have a generic
name, representing the class of a device. Also the convention for node
names is to use hyphens, not underscores.
No functional changes.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201027170947.132725-9-krzk@kernel.org
The Devicetree specification expects device node names to have a generic
name, representing the class of a device. Also the convention for node
names is to use hyphens, not underscores.
No functional changes.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201027170947.132725-8-krzk@kernel.org
The Devicetree specification expects device node names to have a generic
name, representing the class of a device. Also the convention for node
names is to use hyphens, not underscores.
No functional changes.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201027170947.132725-7-krzk@kernel.org
The Devicetree specification expects device node names to have a generic
name, representing the class of a device. Also the convention for node
names is to use hyphens, not underscores.
No functional changes.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201027170947.132725-5-krzk@kernel.org
Using full paths to extend or override a device tree node is error
prone. If there was a typo error, a new node will be created instead of
extending the existing node. This will lead to run-time errors that
could be hard to detect.
A mistyped label on the other hand, will cause a dtc compile error
(during build time).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201027170947.132725-4-krzk@kernel.org
The Devicetree specification expects device node names to have a generic
name, representing the class of a device. Also the convention for node
names is to use hyphens, not underscores.
No functional changes.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201027170947.132725-3-krzk@kernel.org
The Devicetree specification expects device node names to have a generic
name, representing the class of a device. Also the convention for node
names is to use hyphens, not underscores.
No functional changes.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201027170947.132725-2-krzk@kernel.org
Add a node for the BCM4334 Bluetooth chip on the serial bus #0 on
the Exynos4412-based Midas board family.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20201027142330.5121-3-m.szyprowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add a node for the BCM4330 Bluetooth chip on the serial bus #0 on
the Exynos4210-based Universal C210 boards.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20201027142330.5121-2-m.szyprowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The node names for devices using the pwm-leds driver follow a certain
naming scheme (now). Parent node name is not enforced, but recommended
by DT project.
DTC arch/arm/boot/dts/at91-kizbox2-2.dt.yaml
CHECK arch/arm/boot/dts/at91-kizbox2-2.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/at91-kizbox2-2.dt.yaml: pwm_leds: 'blue', 'green', 'red' do not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/at91-kizbox3-hs.dt.yaml
CHECK arch/arm/boot/dts/at91-kizbox3-hs.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/at91-kizbox3-hs.dt.yaml: pwm_leds: 'blue', 'green', 'red', 'white' do not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
(Warnings above are for armv7 only, armv5 would produce similar warnings.)
Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201005203451.9985-6-post@lespocky.de
Do it the simple way like for the other kizbox boards. This will allow
renaming the led controller node name later without breaking things.
Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201005203451.9985-5-post@lespocky.de
Add description for Vin power supply and for peripherals that
are supplied by Vin.
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Add description for Vin power supply and for peripherals that
are supplied by Vin.
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Defining the EEPROM pagesize can increase the write speed significantly.
Set it to the pagesize stated in the EEPROM's datasheet for
phyCORE-i.MX 6UL, phyCORE-i.MX 6 and phyFLEX-i.MX 6.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Set the correct EEPROM compatible for phyCORE-i.MX 6 and phyFLEX-i.MX 6,
as stated in the device tree bindings.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The touchscreen subnode name needs to be stmpe_touchscreen as mentioned
in the dt-bindings.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
USBOTG1 has a Micro-USB port that can be used in host mode (using an OTG
cable) or device mode.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
