The ADC is different from the at91sam9x5 ADC. Not only it doesn't have the
same resolution but it even has only one and the LOWRES bit doesn't exist.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Link: https://lore.kernel.org/r/20201128222818.1910764-9-alexandre.belloni@bootlin.com
The 'eth_switch' name has been misspelled in the imx28.dtsi file,
so this change fixes it.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Protonic WD3 is a proof of concept platform for tractor e-cockpit applications
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Use the correct pin for the i2c scl signal else we can't access the
SoM eeprom.
Fixes: 2a51f9dae1 ("ARM: dts: imx6qdl-kontron-samx6i: Add iMX6-based Kontron SMARC-sAMX6i module")
Signed-off-by: Bernd Bauer <bernd.bauer@anton-paar.com>
[m.felsch@pengutronix.de: Adapt commit message]
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Set it to max. allowed 375kHz for faster transfers. The limit is given
by the erratum [1].
[1] https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Since commit 8ad2d1dcce ("ARM: dts: imx6qdl-wandboard: Add OV5645 camera
support") the PAD_GPIO_6 is used for providing the camera sensor clock.
Remove it from the enetgrp to fix the following IOMXU conflict:
[ 9.972414] imx6q-pinctrl 20e0000.pinctrl: pin MX6Q_PAD_GPIO_6 already requested by 2188000.ethernet; cannot claim for 1-003c
[ 9.983857] imx6q-pinctrl 20e0000.pinctrl: pin-140 (1-003c) status -22
[ 9.990514] imx6q-pinctrl 20e0000.pinctrl: could not request pin 140 (MX6Q_PAD_GPIO_6) from group ov5645grp on device 20e0000.pinctrl
Fixes: 8ad2d1dcce ("ARM: dts: imx6qdl-wandboard: Add OV5645 camera support")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
New drivers:
- SoC info driver to expose revision information
New features:
- AST2600 support for the LPC control driver. This includes
setting the LPC2AHB bridge up in a backwards compatible manner.
Cleanups:
- LPC control
- Kconfig
- Bindings updates for AST2600 strings
-----BEGIN PGP SIGNATURE-----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=KcaK
-----END PGP SIGNATURE-----
Merge tag 'aspeed-5.11-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/drivers
ASPEED soc driver updates for 5.11
New drivers:
- SoC info driver to expose revision information
New features:
- AST2600 support for the LPC control driver. This includes
setting the LPC2AHB bridge up in a backwards compatible manner.
Cleanups:
- LPC control
- Kconfig
- Bindings updates for AST2600 strings
* tag 'aspeed-5.11-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
soc: aspeed: Enable drivers with ARCH_ASPEED
soc: aspeed: Fix a reference leak in aspeed_socinfo_init()
soc: aspeed: remove unneeded semicolon
soc: aspeed-lpc-ctrl: Fix driver name
soc: aspeed-lpc-ctrl: Fix whitespace
soc: aspeed-lpc-ctrl: LPC to AHB mapping on ast2600
soc: aspeed-lpc-ctrl: Fail probe of lpc-ctrl if reserved memory is not aligned
soc: aspeed: lpc: Add AST2600 compatible strings
dt-bindings: aspeed-lpc: Add AST2600 compatible strings
ARM: dts: aspeed: Add silicon id node
soc: aspeed: Add soc info driver
dt-bindings: aspeed: Add silicon id node to SCU
soc: aspeed: Improve kconfig
Link: https://lore.kernel.org/r/CACPK8Xe=9ezhyWRMqVOEQr7SU1YoYfVBGGdGzjmE4SiBr--vJQ@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add device tree for RD-AC3X-48G4X2XL board. This has a Armada 382 SoC on
a interposer board connected to a baseboard with a Prestera AC3X ASIC
connected via PCI.
Signed-off-by: Aryan Srivastava <aryan.srivastava@alliedtelesis.co.nz>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
In accordance with the DWC USB3 bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly
named.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Rockchip RK3288 and RK3399Pro based VMARC SOM has sdio0 for
connecting WiFi/BT devices as a pluggable card via M.2 E-Key.
Add associated sdio0 nodes, properties.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20201023181814.220974-2-jagan@amarulasolutions.com
[moved the unrelated rtc addition to a separate patch]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the hym8563 rtc found on the rk3288 variant of the VMARC SOM.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20201023181814.220974-2-jagan@amarulasolutions.com
[split out of the original patch, as it was a change unrelated
to the commit description]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
A test with the command below gives for example this error:
/arch/arm/boot/dts/rv1108-evb.dt.yaml:
wdt@10360000: $nodename:0: 'wdt@10360000'
does not match '^watchdog(@.*|-[0-9a-f])?$'
Fix it by renaming the wdt nodename to watchdog
in the rv1108.dtsi file.
make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20201116150756.14265-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Only nodes which have status = "disabled" defined from included files
need status = "okay".
The ethernet-phy node and the i2cmux node do not need it, since they are
wholly defined here.
Signed-off-by: Marek Behún <kabel@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Cc: Andreas Färber <afaerber@suse.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Use property name `phy-handle` instead of the deprecated `phy` to
connect eth2 to the PHY.
Rename the node from "phy@1" to "ethernet-phy@1", since "phy@1" is
incorrect according to device-tree bindings documentation.
Also remove the "ethernet-phy-id0141.0DD1" compatible string, it is not
needed. Kernel can read the PHY identifier itself.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Cc: Andreas Färber <afaerber@suse.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Linux now has incomplete support for the LED controller on Turris Omnia:
it can set brightness and colors for each LED.
The controller can also put these LEDs into HW controlled mode, in which
the LEDs are controlled by HW: for example the WAN LED is connected via
MCU to the WAN PHY LED pin.
The driver does not support these HW controlled modes yet, and on probe
puts the LEDs into SW controlled mode.
Add node describing the LED controller, but disable it for now.
Signed-off-by: Marek Behún <kabel@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Cc: Andreas Färber <afaerber@suse.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Turris Omnia has an SFP cage that, together with WAN PHY, is connected
to eth2 SerDes via a SerDes multiplexor. When a SFP module is present,
the multiplexor switches the SerDes signal from PHY to SFP.
Describe the SFP cage, but leave it disabled. Until phylink has support
for such configuration, we are leaving it to U-Boot to enable SFP and
disable WAN PHY at boot time depending on whether a SFP module is
present.
Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes: 26ca8b52d6 ("ARM: dts: add support for Turris Omnia")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Cc: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Cc: Andreas Färber <afaerber@suse.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Describe switch interrupt for Turris Omnia so that the CPU does not have
to poll the switch. We also need to to set mpp45 pin to gpio function
for this.
Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes: 26ca8b52d6 ("ARM: dts: add support for Turris Omnia")
Cc: linux-arm-kernel@lists.infradead.org
Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Cc: Andreas Färber <afaerber@suse.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
The eth2 controller on Turris Omnia is connected to SerDes. For SFP to
be able to switch between 1G and 2.5G modes the comphy link has to be
defined.
Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes: f3a6a9f370 ("ARM: dts: add description for Armada 38x ...")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
The buffer manager is available on Turris Omnia but needs to be
described in device-tree to be used.
Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes: 26ca8b52d6 ("ARM: dts: add support for Turris Omnia")
Cc: linux-arm-kernel@lists.infradead.org
Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Cc: Andreas Färber <afaerber@suse.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
This adds support for the OMNIA Flex Concentrator product
from Kamstrup A/S. It's providing radio mesh communication
infrastructure for smart electricity meters.
Kamstrup OMNIA is a modular and scalable smart grid platform.
Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Update the calibration table to make the temperature more accurate.
Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The range of dcfg reg is wrong, which overlap with other device,
such as rcpm. This issue causing rcpm driver failed to claim
reg resource when calling devm_ioremap_resource().
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The data of property 'fsl,rcpm-wakeup' is not corrcet, which causing
RCPM driver incorrectly program register IPPDEXPCR1, then flextimer is
wrongly clock gated during system suspend, can't send interrupt to
wake.
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add pinctrl information for the 98dx3236 (and variants). There is only
one choice for i2c0 MPP14 and MPP15.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
The switches with integrated CPUs have only got a single i2c controller.
They incorrectly gained one when they were split from the Armada-XP.
Fixes: 43e28ba877 ("ARM: dts: Use armada-370-xp as a base for armada-xp-98dx3236")
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
The convention for node names is to use hyphens, not underscores.
dtschema for pca95xx expects GPIO hogs to end with 'hog' prefix.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
While the DT parser recognizes "ok" as a valid value for the
"status" property, it is actually mentioned nowhere. Use the
proper value "okay" instead, as done in the majority of files
already.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
MikroTik CRS328-4C-20S-4S board has a switch chip with an integrated
Marvell Prestera 98DX3236 CPU.
This commit includes two board variants, namely the factory
default one and a Bit variant. The Bit variant has a
bigger Macronix flash.
This device tree includes basic Linux support.
Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Jakov Petrina <jakov.petrina@sartura.hr>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
MikroTik CRS305-1G-4S board has a switch chip with an integrated
Marvell Prestera 98DX3236 CPU.
This commit includes two board variants, namely the factory
default one and a Bit variant. The Bit variant has a
bigger Macronix flash.
This device tree includes basic Linux support.
Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Jakov Petrina <jakov.petrina@sartura.hr>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
MikroTik CRS326-24G-2S board has a switch chip with an integrated
Marvell Prestera 98DX3236 CPU.
This commit includes two board variants, namely the factory
default one and a Bit variant. The Bit variant has a
bigger Macronix flash.
This device tree includes basic Linux support.
Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Jakov Petrina <jakov.petrina@sartura.hr>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
This property is used by io-channel consumers, not providers so should
not present here. Note dt_schema will now detect this error as there
is a dependency between this property and io-channels.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Andy Gross <andy.gross@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20201115192951.1073632-7-jic23@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Another set of patches for devicetree files and Arm
SoC specific drivers:
- A fix for OP-TEE shared memory on non-SMP systems
- multiple code fixes for the OMAP platform, including
one regression for the CPSW network driver and a few
runtime warning fixes
- Some DT patches for the Rockchip RK3399 platform,
in particular fixing the MMC device ordering that
recently became nondeterministic with async probe.
- Multiple DT fixes for the Tegra platform, including
a regression fix for suspend/resume on TX2
- A regression fix for a user-triggered fault in the
NXP dpio driver
- A regression fix for a bug caused by an earlier bug
fix in the xilinx firmware driver
- Two more DTC warning fixes
- Sylvain Lemieux steps down as maintainer for the
NXP LPC32xx platform
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=yGOq
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-fixes-v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Another set of patches for devicetree files and Arm SoC specific
drivers:
- A fix for OP-TEE shared memory on non-SMP systems
- multiple code fixes for the OMAP platform, including one regression
for the CPSW network driver and a few runtime warning fixes
- Some DT patches for the Rockchip RK3399 platform, in particular
fixing the MMC device ordering that recently became
nondeterministic with async probe.
- Multiple DT fixes for the Tegra platform, including a regression
fix for suspend/resume on TX2
- A regression fix for a user-triggered fault in the NXP dpio driver
- A regression fix for a bug caused by an earlier bug fix in the
xilinx firmware driver
- Two more DTC warning fixes
- Sylvain Lemieux steps down as maintainer for the NXP LPC32xx
platform"
* tag 'arm-soc-fixes-v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
arm64: tegra: Fix Tegra234 VDK node names
arm64: tegra: Wrong AON HSP reg property size
arm64: tegra: Fix USB_VBUS_EN0 regulator on Jetson TX1
arm64: tegra: Correct the UART for Jetson Xavier NX
arm64: tegra: Disable the ACONNECT for Jetson TX2
optee: add writeback to valid memory type
firmware: xilinx: Use hash-table for api feature check
firmware: xilinx: Fix SD DLL node reset issue
soc: fsl: dpio: Get the cpumask through cpumask_of(cpu)
ARM: dts: dra76x: m_can: fix order of clocks
bus: ti-sysc: suppress err msg for timers used as clockevent/source
MAINTAINERS: Remove myself as LPC32xx maintainers
arm64: dts: qcom: clear the warnings caused by empty dma-ranges
arm64: dts: broadcom: clear the warnings caused by empty dma-ranges
ARM: dts: am437x-l4: fix compatible for cpsw switch dt node
arm64: dts: rockchip: Reorder LED triggers from mmc devices on rk3399-roc-pc.
arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards.
arm64: dts: rockchip: Remove system-power-controller from pmic on Odroid Go Advance
arm64: dts: rockchip: fix NanoPi R2S GMAC clock name
ARM: OMAP2+: Manage MPU state properly for omap_enter_idle_coupled()
...
This adds support for the Tegra30-based Ouya game console and enhances a
number of existing device trees. It also fixes a couple of minor issues
that were found during DT validation.
-----BEGIN PGP SIGNATURE-----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=CH8u
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.11-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
ARM: tegra: Device tree changes for v5.11-rc1
This adds support for the Tegra30-based Ouya game console and enhances a
number of existing device trees. It also fixes a couple of minor issues
that were found during DT validation.
* tag 'tegra-for-5.11-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (23 commits)
ARM: tegra: Add EMC OPP and ICC properties to Tegra124 EMC and ACTMON device-tree nodes
ARM: tegra: Add EMC OPP and ICC properties to Tegra30 EMC and ACTMON device-tree nodes
ARM: tegra: Add EMC OPP properties to Tegra20 device-trees
ARM: tegra: Add nvidia,memory-controller phandle to Tegra20 EMC device-tree
ARM: tegra: Add interconnect properties to Tegra124 device-tree
ARM: tegra: Add interconnect properties to Tegra30 device-tree
ARM: tegra: Add interconnect properties to Tegra20 device-tree
ARM: tegra: acer-a500: Add Embedded Controller
ARM: tegra: Change order of SATA resets for Tegra124
ARM: tegra: Correct EMC registers size in Tegra20 device-tree
ARM: tegra: Properly align clocks for SOCTHERM
ARM: tegra: Hook up edp interrupt on Tegra124 SOCTHERM
ARM: tegra: Add missing hot temperatures to Tegra124 thermal-zones
ARM: tegra: Add missing gpu-throt-level to Tegra124 soctherm
ARM: tegra: Populate OPP table for Tegra20 Ventana
ARM: tegra: nexus7: Use panel-lvds as the only panel compatible
ARM: tegra: nexus7: Rename gpio-hog nodes
ARM: tegra: nexus7: Add power-supply to lvds-encoder node
ARM: tegra: nexus7: Improve CPU passive-cooling threshold
ARM: tegra: nexus7: Correct thermal zone names
...
Link: https://lore.kernel.org/r/20201127144329.124891-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Highlights:
----------
MCU part:
-Fix dmamux reg property (length) on stm32h743.
-Explicitly set DCMI bus type on stm32429i eval board.
MPU part:
-Enable FIFO mode with half-full threshold for DCMI.
-Harmonize EHCI/OHCI nodes.
-Move SDMMC IP version to v2.0 to get features improvements.
-Add LP-timer wakeup support.
-Enable crypto/hash/crc support.
-Explicitly set DCMI bus type on stm32mp157 eval board.
-Add USB type-c controller (STUSB1600) on stm32mp15 DK boards
(It is connected to I2C4).
-Fix dmamux reg property (length) on stm32mp151.
-Optimize USB OTG FIFO sizes on stm32mp151.
-Declare tamp node also as "simple-mfd".
-LXA:
-Document Octavo vendor-prefixes yaml file.
-Document lxa,stm32mp157c-mc1 in STM32 yaml file.
-DH:
-Connect PHY IRQ line on DH SoM.
-Add KS8851 Ethernet support on DHCOM which is mapped to FMC2.
-Document all DH compatible strings in STM32 yaml file.
-Add DHCOM based PicoITX board. This board embedds ethernet port,
USB, CAN LEDS and a custom board-to-board connector.
-----BEGIN PGP SIGNATURE-----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=O+Lk
-----END PGP SIGNATURE-----
Merge tag 'stm32-dt-for-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt
STM32 DT updates for v5.11, round 1
Highlights:
----------
MCU part:
-Fix dmamux reg property (length) on stm32h743.
-Explicitly set DCMI bus type on stm32429i eval board.
MPU part:
-Enable FIFO mode with half-full threshold for DCMI.
-Harmonize EHCI/OHCI nodes.
-Move SDMMC IP version to v2.0 to get features improvements.
-Add LP-timer wakeup support.
-Enable crypto/hash/crc support.
-Explicitly set DCMI bus type on stm32mp157 eval board.
-Add USB type-c controller (STUSB1600) on stm32mp15 DK boards
(It is connected to I2C4).
-Fix dmamux reg property (length) on stm32mp151.
-Optimize USB OTG FIFO sizes on stm32mp151.
-Declare tamp node also as "simple-mfd".
-LXA:
-Document Octavo vendor-prefixes yaml file.
-Document lxa,stm32mp157c-mc1 in STM32 yaml file.
-DH:
-Connect PHY IRQ line on DH SoM.
-Add KS8851 Ethernet support on DHCOM which is mapped to FMC2.
-Document all DH compatible strings in STM32 yaml file.
-Add DHCOM based PicoITX board. This board embedds ethernet port,
USB, CAN LEDS and a custom board-to-board connector.
* tag 'stm32-dt-for-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (34 commits)
ARM: dts: stm32: lxa-mc1: add OSD32MP15x to list of compatibles
dt-bindings: arm: stm32: add extra SiP compatible for lxa,stm32mp157c-mc1
dt-bindings: vendor-prefixes: document Octavo Systems oct prefix
ARM: dts: stm32: Add DHCOM based PicoITX board
dt-bindings: arm: stm32: Add compatible strings for DH SoMs and boards
ARM: dts: stm32: support child mfd cells for the stm32mp1 TAMP syscon
dt-bindings: arm: stm32: add simple-mfd compatible for tamp node
ARM: dts: stm32: update stm32mp151 for remote proc synchronization support
ARM: dts: stm32: adjust USB OTG gadget fifo sizes in stm32mp151
ARM: dts: stm32: fix dmamux reg property on stm32h743
ARM: dts: stm32: fix dmamux reg property on stm32mp151
ARM: dts: stm32: fix mdma1 clients channel priority level on stm32mp151
ARM: dts: stm32: add STUSB1600 Type-C using I2C4 on stm32mp15xx-dkx
dt-bindings: usb: Add DT bindings for STUSB160x Type-C controller
dt-bindings: connector: add typec-power-opmode property to usb-connector
ARM: dts: stm32: reorder spi4 within stm32mp15-pinctrl
ARM: dts: stm32: set bus-type in DCMI endpoint for stm32429i-eval board
ARM: dts: stm32: set bus-type in DCMI endpoint for stm32mp157c-ev1 board
ARM: dts: stm32: enable CRYP by default on stm32mp15
ARM: dts: stm32: enable CRC1 by default on stm32mp15
...
Link: https://lore.kernel.org/r/873c17a5-28d5-9261-f691-1b917611c932@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Two non-urgent pandaboard updates to get gpio button and bluetooth
working on pandaboard-es
- Updates to follow devicetree binding docs for dwc3 and pwm-leds
- Add initial support for droid bionic based on what we have for droid4
- Add second sha instance for dra7
- Add eQEP nodes for am335x for boneblue
- Fix wrong comments for am335x gpio_31
-----BEGIN PGP SIGNATURE-----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=7jNq
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.11/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt
Devicetree changes for omaps for v5.11 merge window
- Two non-urgent pandaboard updates to get gpio button and bluetooth
working on pandaboard-es
- Updates to follow devicetree binding docs for dwc3 and pwm-leds
- Add initial support for droid bionic based on what we have for droid4
- Add second sha instance for dra7
- Add eQEP nodes for am335x for boneblue
- Fix wrong comments for am335x gpio_31
* tag 'omap-for-v5.11/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am335x: Fix comments for AM335X_PIN_GPMC_WPN pin in GPIO mode
ARM: dts: am335x-boneblue: Enable eQEP
ARM: dts: am33xx: Add nodes for eQEP
ARM: dts: dra7: add second SHA instance
ARM: dts: xt875: add section for kionix kxtf9
ARM: dts: mapphone: separate out xt894 specific things
ARM: dts: omap: Fix schema warnings for pwm-leds
ARM: dts: omap5: Harmonize DWC USB3 DT nodes name
ARM: dts: am437x: Correct DWC USB3 compatible string
ARM: dts: pandaboard es: add bluetooth uart for HCI
ARM: dts: pandaboard: fix pinmux for gpio user button of Pandaboard ES
Link: https://lore.kernel.org/r/pull-1606462656-588116@atomide.com-2
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Earlier omap4 cpuidle fix was incomplete and needs to use a
configured idle state instead
- Fix am4 cpsw driver compatible to avoid invalid resource error
for the legacy driver
- Two kconfig fixes for genpd support that we added for for v5.10
for proper location of the option and adding missing option
- Fix ti-sysc reset status checking on enabling modules to ignore
quirky modules with reset status only usable when the quirk is
activated during reset. Also fix bogus resetdone warning for
cpsw and modules with no sysst register reset status bit
- Suppress a ti-sysc warning for timers reserved as system timers
- Fix the ordering of clocks for dra7 m_can
-----BEGIN PGP SIGNATURE-----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=KSUM
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.10/fixes-rc5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps for various issues noticed during the -rc cycle:
- Earlier omap4 cpuidle fix was incomplete and needs to use a
configured idle state instead
- Fix am4 cpsw driver compatible to avoid invalid resource error
for the legacy driver
- Two kconfig fixes for genpd support that we added for for v5.10
for proper location of the option and adding missing option
- Fix ti-sysc reset status checking on enabling modules to ignore
quirky modules with reset status only usable when the quirk is
activated during reset. Also fix bogus resetdone warning for
cpsw and modules with no sysst register reset status bit
- Suppress a ti-sysc warning for timers reserved as system timers
- Fix the ordering of clocks for dra7 m_can
* tag 'omap-for-v5.10/fixes-rc5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: dra76x: m_can: fix order of clocks
bus: ti-sysc: suppress err msg for timers used as clockevent/source
ARM: dts: am437x-l4: fix compatible for cpsw switch dt node
ARM: OMAP2+: Manage MPU state properly for omap_enter_idle_coupled()
bus: ti-sysc: Fix bogus resetdone warning on enable for cpsw
bus: ti-sysc: Fix reset status check for modules with quirks
ARM: OMAP2+: Fix missing select PM_GENERIC_DOMAINS_OF
ARM: OMAP2+: Fix location for select PM_GENERIC_DOMAINS
Link: https://lore.kernel.org/r/pull-1606460270-864284@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Cleanups of the hisilicon DTS to align with the dtschema including
serial, usb, amba-bus, memory, mmc, spi and syscon. All of them do not
have any functional effect except passing dtschema checks or dtc W=2
builds.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=a9Ci
-----END PGP SIGNATURE-----
Merge tag 'hisi-arm32-dt-for-5.11' of git://github.com/hisilicon/linux-hisi into arm/dt
ARM: DT: Hisilicon ARM32 DT updates for 5.11
- Cleanups of the hisilicon DTS to align with the dtschema including
serial, usb, amba-bus, memory, mmc, spi and syscon. All of them do not
have any functional effect except passing dtschema checks or dtc W=2
builds.
* tag 'hisi-arm32-dt-for-5.11' of git://github.com/hisilicon/linux-hisi:
ARM: dts: hisilicon: fix errors detected by syscon.yaml
ARM: dts: hisilicon: fix errors detected by spi-pl022.yaml
ARM: dts: hisilicon: fix errors detected by synopsys-dw-mshc.yaml
ARM: dts: hisilicon: fix errors detected by root-node.yaml
ARM: dts: hisilicon: fix errors detected by simple-bus.yaml
ARM: dts: hisilicon: fix errors detected by usb yaml
ARM: dts: hisilicon: fix errors detected by pl011.yaml
ARM: dts: hisilicon: fix errors detected by snps-dw-apb-uart.yaml
Link: https://lore.kernel.org/r/5FBDC347.4050102@hisilicon.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add EMC OPP DVFS/DFS tables and interconnect paths that will be used for
dynamic memory bandwidth scaling based on memory utilization statistics.
Update board device-trees by removing unsupported EMC OPPs.
Note that ACTMON watches all memory interconnect paths, but we use a
single CPU-READ interconnect path for driving memory bandwidth, for
simplicity.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add EMC OPP tables and interconnect paths that will be used for
dynamic memory bandwidth scaling based on memory utilization statistics.
Update board device-trees by removing unsupported EMC OPPs.
Note that ACTMON watches all memory interconnect paths, but we use a
single CPU-READ interconnect path for driving memory bandwidth, for
simplicity.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add nvidia,memory-controller to the Tegra20 External Memory Controller
node. This allows to perform a direct lookup of the Memory Controller
instead of walking up the whole tree. This puts Tegra20 device-tree on
par with Tegra30+.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add interconnect properties to the Memory Controller, External Memory
Controller and the Display Controller nodes in order to describe hardware
interconnection.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add interconnect properties to the Memory Controller, External Memory
Controller and the Display Controller nodes in order to describe hardware
interconnection.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add interconnect properties to the Memory Controller, External Memory
Controller and the Display Controller nodes in order to describe hardware
interconnection.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This patch adds device-tree node for the Embedded Controller which is
found on the Picasso board. The Embedded Controller itself is ENE KB930,
it provides functions like battery-gauge/LED/GPIO/etc and it uses firmware
that is specifically customized for the Acer A500 device.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra AHCI dt-binding doc is converted from text based to yaml based.
dtbs_check valdiation strictly follows reset-names order specified
in yaml dt-binding.
Tegra124 thru Tegra210 has 3 resets sata, sata-oob and sata-cold.
Tegra186 has 2 resets sata and sata-cold.
This patch changes order of SATA resets to maintain proper resets
order for commonly available resets across Tegra124 thru Tegra186
for dtbs_check to pass.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Fix the size of Tegra20 EMC registers, which should be twice bigger.
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
For some reason this was never hooked up. Do it now so that over-current
interrupts can be logged.
Reported-by: Nicolas Chauvet <kwizart@gmail.com>
Suggested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
According to dmesg, thermal-zones for mem and cpu are missing hot
temperatures properties.
throttrip: pll: missing hot temperature
...
throttrip: mem: missing hot temperature
...
Adding them will clear the messages.
Signed-off-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
On Jetson TK1 the following message can be seen:
tegra_soctherm 700e2000.thermal-sensor: throttle-cfg: heavy: no throt prop or invalid prop
This patch will fix the invalid prop issue according to the binding.
Signed-off-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Commit 9ce2746304 ("cpufreq: tegra20: Use generic cpufreq-dt driver
(Tegra30 supported now)") update the Tegra20 CPUFREQ driver to use the
generic CPUFREQ device-tree driver. Since this change CPUFREQ support
on the Tegra20 Ventana platform has been broken because the necessary
device-tree nodes with the operating point information are not populated
for this platform. Fix this by updating device-tree for Venata to
include the operating point informration for Tegra20.
Fixes: 9ce2746304 ("cpufreq: tegra20: Use generic cpufreq-dt driver (Tegra30 supported now)")
Cc: stable@vger.kernel.org
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Depending on a driver probe order, panel-simple driver may probe first,
which results in this error:
panel-simple display-panel: Reject override mode: panel has a fixed mode
We don't want to use panel-simple anyways because customized timings are
preferred for Nexus 7, hence remove the panel-simple compatibles from the
panel node.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Devicetree schema now requires gpio-hog nodes to have a certain naming
pattern, like a -hog suffix. This patch fixes dtbs_check warnings about
the names.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The lvds-encoder binding now supports power-supply property, let's specify
it in the device-tree for completeness.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The current CPU thermal limit is a bit inappropriate for Nexus 7 once
device is getting used on a daily bases. For example, currently it's may
be impossible to watch a hardware accelerated 720p video without hitting
a severe CPU throttling, which ruins user experience. This patch improves
the thermal throttling thresholds.
In my experience setting CPU thermal threshold to 57C provides the most
reasonable result, where device is a bit warm under constant load and
not getting overly hot, in the same time performance is okay. Let's bump
the passive-cooling threshold from 50C to 57C and also lower the thermal
hysteresis to 0.2C in order to make throttling more reactive.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Rename thermal zones in order fix dt_binding_check warning telling that
names do not match the expected pattern.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The lvds-encoder binding now supports power-supply property, let's specify
it in the device-tree for completeness.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Rename thermal zones in order fix dt_binding_check warning telling that
names do not match the expected pattern.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Ouya was the sole device produced by Ouya Inc in 2013.
It was a game console originally running Android 5 on top of Linux 3.1.10.
This patch adds the device tree supporting the Ouya.
It has been tested on the original variant with Samsung ram.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The LG Nexus 5 uses a maxim17048 fuelgauge. The maxim,rcomp value is
taken from downstream dt. Temperature-based compensation is not yet
supported in the mainline driver, but the readings seem fine nevertheless.
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@protonmail.com>
Link: https://lore.kernel.org/r/20201126141144.1763779-2-iskren.chernev@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The Samsung Galaxy S5 uses a maxim17048 fuelgauge. The maxim,rcomp value
is taken from downstream kernel. Model data and temperature-based
compensation are not yet supported in the mainline driver, but the
readings seem fine nevertheless.
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Link: https://lore.kernel.org/r/20201126141144.1763779-1-iskren.chernev@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Earlier commit modified the binding, so the SiP is to be specified
as well. Adjust the device tree accordingly.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Add DT for DH PicoITX unit, which is a bare-bones carrier board for
the DHCOM. The board has ethernet port, USB, CAN, LEDs and a custom
board-to-board expansion connector.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
The stm32mp1 TAMP peripheral has 32 backup registers that survive
a warm reset. This makes them suitable for storing a reboot
mode, which the vendor's kernel tree is already doing[0].
The actual syscon-reboot-mode child node can be added by a board.dts or
fixed up by the bootloader. For the child node to be probed, the
compatible needs to include simple-mfd. The binding now specifies this,
so have the SoC dtsi adhere to it.
[0]: https://github.com/STMicroelectronics/linux/commit/2e9bfc29dd
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Two backup registers are used to store the Cortex-M4 state and the resource
table address.
Declare the tamp node and add associated properties in m4_rproc node
to allow Linux to attach to a firmware loaded by the first boot stages.
Associated driver implementation is available in commit 9276536f45
("remoteproc: stm32: Parse syscon that will manage M4 synchronisation").
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Defaut use case on stm32mp151 USB OTG is ethernet gadget, using EP1 bulk
endpoint (MPS=512 bytes) and EP2 interrupt endpoint (MPS=16 bytes).
This patch optimizes USB OTG FIFO sizes accordingly.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Reg property length should cover all DMAMUX_CxCR registers.
DMAMUX_CxCR Address offset: 0x000 + 0x04 * x (x = 0 to 15), so latest
offset is at 0x3c, so length should be 0x40.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Reg property length should cover all DMAMUX_CxCR registers.
DMAMUX_CxCR Address offset: 0x000 + 0x04 * x (x = 0 to 15), so latest
offset is at 0x3c, so length should be 0x40.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
This patch adds support for STUSB1600 USB Type-C port controller, used on
I2C4 on stm32mp15xx-dkx.
The default configuration on this board, on Type-C connector, is:
- Dual Power Role (DRP), so set power-role to "dual";
- Vbus limited to 500mA, so set typec-power-opmode to "default" (it means
500mA in USB 2.0).
typec-power-opmode is used to reconfigure the STUSB1600 advertising of
current capability when its NVM is not in line with the board layout.
On stm32mp15xx-dkx, Vbus power source of STUSB1600 is 5V_VIN. So power
operation mode depends on the power supply used. To avoid any power
issues, it is better to limit Vbus to 500mA on this board.
ALERT# is the interrupt pin of STUSB1600. It needs an external pull-up, and
signal is active low.
USB OTG controller ID and Vbus signals are not connected on stm32mp15xx-dkx
boards, so disconnection are not detected.
Without DWC2 usb-role-switch:
- if you unplug the USB cable from the Type-C port, you have to manually
disconnect the USB gadget:
echo disconnect > /sys/devices/platform/soc/49000000.usb-otg/udc/49000000.usb-otg/soft_connect
- Then you can plug the USB cable again in the Type-C port, and manually
reconnect the USB gadget:
echo connect > /sys/devices/platform/soc/49000000.usb-otg/udc/49000000.usb-otg/soft_connect
With DWC2 usb-role-switch, USB gadget is dynamically disconnected or connected.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Move spi4 at the right alphabetical place within stm32mp15-pinctrl
Fixes: 4fe663890a ("ARM: dts: stm32: Fix spi4 pins in stm32mp15-pinctrl")
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
LP timer can be used to wakeup from stop mode on stm32mp151.
Add wakeup-source properties to all LP timer instances.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Update the IP version to v2.0, which supports linked lists in internal DMA,
and is present in STM32MP1 SoCs.
The mmci driver supports the v2.0 periph id since 7a2a98be67 ("mmc: mmci:
Add support for sdmmc variant revision 2.0"), so it's now Ok to add it into
the SoC device tree to benefit from the improved DMA support.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
In accordance with the Generic EHCI/OHCI bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "generic-ehci" and "generic-ohci"-compatible
nodes are correctly named.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Amelie Delaunay <amelie.delaunay@st.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Adding Z-turn board V5 to resolve the change between:
"Z-TURNBOARD_schematic.pdf" schematics state version 1 to 4 has Atheros AR8035
"Z-Turn_Board_sch_V15_20160303.pdf" schematics state version 5 has Micrel KSZ9031
Changes v1 -> v2: Instead of using new board, the v2 using a common devicetree
for z-turn boards (zynq-zturn-common.dtsi) and for each board a specific DT
Signed-off-by: Alexandre GRIVEAUX <agriveaux@deutnet.info>
Link: https://lore.kernel.org/r/20201126070516.85882-1-agriveaux@deutnet.info
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
The RX/TX delays for the Ethernet PHY on the Linksprite pcDuino 3 Nano
are configured in hardware, using resistors that are populated to pull
the RTL8211E's RXDLY/TXDLY pins low or high as needed.
phy-mode should be set to rgmii-id to reflect this. Previously it was
set to rgmii, which used to work but now results in the delays being
disabled again as a result of the bugfix in commit bbc4d71d63 ("net:
phy: realtek: fix rtl8211e rx/tx delay config").
Tested on two pcDuino 3 Nano boards purchased in 2015. Without this fix,
Ethernet works unreliably on one board and doesn't work at all on the
other.
Fixes: 061035d456 ("ARM: dts: sun7i: Add dts file for pcDuino 3 Nano board")
Signed-off-by: Adam Sampson <ats@offog.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20201123174739.6809-1-ats@offog.org
The DT binding for system controller is not allowed to contain only the
compatible string "syscon", the Hisilicon peripheral subsystem controller
should add compatible string "hisilicon,peri-subctrl". Otherwise, the
error "compatible: ['syscon'] is too short" will be reported.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
1. Change clock-names to "sspclk", "apb_pclk". Both of them use the same
clock.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Look at the clock-names schema defined in synopsys-dw-mshc.yaml:
clock-names:
items:
- const: biu
- const: ciu
The "biu" needs to be placed before the "ciu".
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Make the memory node name match the regex "^memory(@[0-9a-f]+)?$" which
is described in memory.yaml. Otherwise, it will be treated as root node,
and misreported by root-node.yaml.
Errors misreported by root-node.yaml:
/: memory: False schema does not allow {'device_type': ['memory'], 'reg':
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Change bus node name from "amba" to "amba-bus" to match
'^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
1. Change node name to match '^usb(@.*)?'
These errors are detected by generic-ehci.yaml and generic-ohci.yaml.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
1. Change node name to match '^serial(@[0-9a-f,]+)*$'
2. Change clock-names to "uartclk", "apb_pclk". Both of them use the same
clock.
3. Change pinctrl-names to "default", "sleep".
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
1. Change node name to match '^serial(@[0-9a-f,]+)*$'
2. Change clock-names to "baudclk", "apb_pclk". Both of them use the same
clock.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
The pincontrol node is needed for USB Host since Linux v5.7-rc1. Without
it the driver probes but VBus is not powered because of wrong pincontrol
configuration.
Fixes: b7c2b61570 ("ARM: at91: add Atmel's SAMA5D3 Xplained board")
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Link: https://lore.kernel.org/r/20201118120019.1257580-4-cristian.birsan@microchip.com
The pincontrol node is needed for USB Host since Linux v5.7-rc1. Without
it the driver probes but VBus is not powered because of wrong pincontrol
configuration.
Fixes: 38153a0178 ("ARM: at91/dt: sama5d4: add dts for sama5d4 xplained board")
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Link: https://lore.kernel.org/r/20201118120019.1257580-3-cristian.birsan@microchip.com
The pincontrol node is needed for USB Host since Linux v5.7-rc1. Without
it the driver probes but VBus is not powered because of wrong pincontrol
configuration.
Fixes: 1e5f532c27 ("ARM: dts: at91: sam9x60: add device tree for soc and board")
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Link: https://lore.kernel.org/r/20201118120019.1257580-2-cristian.birsan@microchip.com
- Rename the DSI controllers to match the preferred
schema.
- Pull down the SDI2 feedback clock on the Skomer.
- Add proper supplies to the MaxToch touchscreen on
the Golden.
-----BEGIN PGP SIGNATURE-----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=TF1x
-----END PGP SIGNATURE-----
Merge tag 'ux500-dts-for-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into arm/dt
Ux500 DTS updates for the v5.11 kernels:
- Rename the DSI controllers to match the preferred
schema.
- Pull down the SDI2 feedback clock on the Skomer.
- Add proper supplies to the MaxToch touchscreen on
the Golden.
* tag 'ux500-dts-for-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
ARM: dts: ux500-golden: Add proper supplies to touchscreen
ARM: dts: ux500: skomer: Pull down SDI2 FBCLK
ARM: dts: ux500: Rename DSI controller nodes
Link: https://lore.kernel.org/r/CACRpkdY_M4xj++QhRPqX6N3x9YmFNJkz70DnvBj7Ai-dOtCJSQ@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add Nuvoton NPCM730 SoC device tree.
The Nuvoton NPCN730 SoC is a part of the
Nuvoton NPCM7xx SoCs family.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Reviewed-by: Benjamin Fair <benjaminfair@google.com>
Link: https://lore.kernel.org/r/20201119080002.100342-1-tmaimon77@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
