The correct syntax for JSON pointers begins with a '/' after the '#'.
Without a '/', the string should be interpreted as a subschema
identifier. The jsonschema module currently doesn't handle subschema
identifiers and incorrectly allows JSON pointers to begin without a '/'.
Let's fix this before it becomes a problem when jsonschema module is
fixed.
Converted with:
perl -p -i -e 's/yaml#definitions/yaml#\/definitions/g' `find Documentation/devicetree/bindings/ -name "*.yaml"`
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: netdev@vger.kernel.org
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20201217223429.354283-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
There are a couple of subsystems maintained by other people that
merge their drivers through the SoC tree, those changes include:
- The SCMI firmware framework gains support for sensor notifications
and for controlling voltage domains.
- A large update for the Tegra memory controller driver, integrating
it better with the interconnect framework
- The memory controller subsystem gains support for Mediatek MT8192
- The reset controller framework gains support for sharing pulsed
resets
For Soc specific drivers in drivers/soc, the main changes are
- The Allwinner/sunxi MBUS gets a rework for the way it handles
dma_map_ops and offsets between physical and dma address spaces.
- An errata fix plus some cleanups for Freescale Layerscape SoCs
- A cleanup for renesas drivers regarding MMIO accesses.
- New SoC specific drivers for Mediatek MT8192 and MT8183 power domains
- New SoC specific drivers for Aspeed AST2600 LPC bus control
and SoC identification.
- Core Power Domain support for Qualcomm MSM8916, MSM8939, SDM660
and SDX55.
- A rework of the TI AM33xx 'genpd' power domain support to use
information from DT instead of platform data
- Support for TI AM64x SoCs
- Allow building some Amlogic drivers as modules instead of built-in
Finally, there are numerous cleanups and smaller bug fixes for
Mediatek, Tegra, Samsung, Qualcomm, TI OMAP, Amlogic, Rockchips,
Renesas, and Xilinx SoCs.
There is a trivial conflict in the cedrus driver, with two branches
adding the same CEDRUS_CAPABILITY_H265_DEC flag, and another trivial
remove/remove conflict in linux/dma-mapping.h.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=BjJf
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"There are a couple of subsystems maintained by other people that merge
their drivers through the SoC tree, those changes include:
- The SCMI firmware framework gains support for sensor notifications
and for controlling voltage domains.
- A large update for the Tegra memory controller driver, integrating
it better with the interconnect framework
- The memory controller subsystem gains support for Mediatek MT8192
- The reset controller framework gains support for sharing pulsed
resets
For Soc specific drivers in drivers/soc, the main changes are
- The Allwinner/sunxi MBUS gets a rework for the way it handles
dma_map_ops and offsets between physical and dma address spaces.
- An errata fix plus some cleanups for Freescale Layerscape SoCs
- A cleanup for renesas drivers regarding MMIO accesses.
- New SoC specific drivers for Mediatek MT8192 and MT8183 power
domains
- New SoC specific drivers for Aspeed AST2600 LPC bus control and SoC
identification.
- Core Power Domain support for Qualcomm MSM8916, MSM8939, SDM660 and
SDX55.
- A rework of the TI AM33xx 'genpd' power domain support to use
information from DT instead of platform data
- Support for TI AM64x SoCs
- Allow building some Amlogic drivers as modules instead of built-in
Finally, there are numerous cleanups and smaller bug fixes for
Mediatek, Tegra, Samsung, Qualcomm, TI OMAP, Amlogic, Rockchips,
Renesas, and Xilinx SoCs"
* tag 'arm-soc-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (222 commits)
soc: mediatek: mmsys: Specify HAS_IOMEM dependency for MTK_MMSYS
firmware: xilinx: Properly align function parameter
firmware: xilinx: Add a blank line after function declaration
firmware: xilinx: Remove additional newline
firmware: xilinx: Fix kernel-doc warnings
firmware: xlnx-zynqmp: fix compilation warning
soc: xilinx: vcu: add missing register NUM_CORE
soc: xilinx: vcu: use vcu-settings syscon registers
dt-bindings: soc: xlnx: extract xlnx, vcu-settings to separate binding
soc: xilinx: vcu: drop useless success message
clk: samsung: mark PM functions as __maybe_unused
soc: samsung: exynos-chipid: initialize later - with arch_initcall
soc: samsung: exynos-chipid: order list of SoCs by name
memory: jz4780_nemc: Fix potential NULL dereference in jz4780_nemc_probe()
memory: ti-emif-sram: only build for ARMv7
memory: tegra30: Support interconnect framework
memory: tegra20: Support hardware versioning and clean up OPP table initialization
dt-bindings: memory: tegra20-emc: Document opp-supported-hw property
soc: rockchip: io-domain: Fix error return code in rockchip_iodomain_probe()
reset-controller: ti: force the write operation when assert or deassert
...
Across all platforms, there is a continued move towards DT schema for
validating the dts files. As a result there are bug fixes for mistakes
that are found using these schema, in addition to warnings from the
dtc compiler.
As usual, many changes are for adding support for additional on-chip
and on-board components in the machines we already support.
The newly supported SoCs for this release are:
- MStar Infinity2M, a low-end IP camera chip based on a dual-core
Cortex-A7, otherwise similar to the Infinity chip we already support.
This is also known as the SigmaStar SSD202D, and we add support for
the Honestar ssd201htv2 development kit.
- Nuvoton NPCM730, a Cortex-A9 based Baseboard Management Controller
(BMC), in the same family as the NPCM750. This gets used in the Ampere
Altra based "Fii Kudo" server and the Quanta GSJ, both of which are
added as well.
- Broadcom BCM4908, a 64-bit home router chip based on Broadcom's own
Brahma-B53 CPU. Support is also added for the Asus ROG Rapture
GT-AC5300 high-end WiFi router based on this chip.
- Mediatek MT8192 is a new SoC based on eight Cortex-A76/A55 cores,
meant for faster Chromebooks and tablets. It gets added along with
its reference design.
- Mediatek MT6779 (Helio P90) is a high-end phone chip from last year's
generation, also added along with its reference board. This one is
still based on Cortex-A75/A55.
- Mediatek MT8167 is a version of the already supported MT8516 chip,
both based on Cortex-A35. It gets added along with the "Pumpkin"
single board computer, but is likely to also make its way into low-end
tablets in the future.
For the already supported chips, there are a number of new boards.
Interestingly there are more 32-bit machines added this time than
64-bit. Here is a brief list of the new boards:
- Three new Mikrotik router variants based on Marvell Prestera
98DX3236, a close relative of the more common Armada XP
- A reference board for the Marvell Armada 382
- Three new servers using ASpeed baseboard management controllers,
the actual machines being from Bytedance, Facebook and IBM,
and one machine using the Nuvoton NPCM750 BMC.
- The Galaxy Note 10.1 (P4) tablet, using an Exynos 4412.
- The usual set of 32-bit i.MX industrial/embedded hardware:
* Protonic WD3 (tractor e-cockpit)
* Kamstrup OMNIA Flex Concentrator (smart grid platform)
* Van der Laan LANMCU (food storage)
* Altesco I6P (vehicle inspection stations)
* PHYTEC phyBOARD-Segin/phyCORE-i.MX6UL baseboard
- DH electronics STM32MP157C DHCOM, a PicoITX carrier board
for the aleady supported DHCOM module
- Three new Allwinner SoC based single-board computers:
* NanoPi R1 (H3 based)
* FriendlyArm ZeroPi (H3 based)
* Elimo Initium SBC (S3 based)
- Ouya Game Console based on Nvidia Tegra 3
- Version 5 of the already supported Zynq Z-Turn MYIR Board
- LX2162AQDS, a reference platform for NXP Layerscape
LX2162A, which is a repackaged 16-core LX2160A
- A series of Kontron i.MX8M Mini baseboard/SoM versions
- Espressobin Ultra, a new variant of the popular Armada 3700 based board,
- IEI Puzzle-M801, a rackmount network appliance based on
Marvell Armada 8040
- Microsoft Lumia 950 XL, a phone
- HDK855 and HDK865 Hardware development kits for Qualcomm
sm8250 and sm8150, respectively
- Three new board variants of the "Trogdor" Chromebook
(sc7180)
- New board variants of the Renesas based "Kingfisher" and
"HiHope" reference boards
- Kobol Helios64, an open source NAS appliance based on Rockchips
RK3399
- Engicam PX30.Core, a SoM based on Rockchip PX30, along with
a few carrier boards.
There is one conflict in mt6577_auxadc.txt, which got replaced in
another tree and modified here, the modification is already part of
the new file.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=R47r
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM device tree updates from Arnd Bergmann:
"Across all platforms, there is a continued move towards DT schema for
validating the dts files. As a result there are bug fixes for mistakes
that are found using these schema, in addition to warnings from the
dtc compiler.
As usual, many changes are for adding support for additional on-chip
and on-board components in the machines we already support.
The newly supported SoCs for this release are:
- MStar Infinity2M, a low-end IP camera chip based on a dual-core
Cortex-A7, otherwise similar to the Infinity chip we already
support. This is also known as the SigmaStar SSD202D, and we add
support for the Honestar ssd201htv2 development kit.
- Nuvoton NPCM730, a Cortex-A9 based Baseboard Management Controller
(BMC), in the same family as the NPCM750. This gets used in the
Ampere Altra based "Fii Kudo" server and the Quanta GSJ, both of
which are added as well.
- Broadcom BCM4908, a 64-bit home router chip based on Broadcom's own
Brahma-B53 CPU. Support is also added for the Asus ROG Rapture
GT-AC5300 high-end WiFi router based on this chip.
- Mediatek MT8192 is a new SoC based on eight Cortex-A76/A55 cores,
meant for faster Chromebooks and tablets. It gets added along with
its reference design.
- Mediatek MT6779 (Helio P90) is a high-end phone chip from last
year's generation, also added along with its reference board. This
one is still based on Cortex-A75/A55.
- Mediatek MT8167 is a version of the already supported MT8516 chip,
both based on Cortex-A35. It gets added along with the "Pumpkin"
single board computer, but is likely to also make its way into
low-end tablets in the future.
For the already supported chips, there are a number of new boards.
Interestingly there are more 32-bit machines added this time than
64-bit. Here is a brief list of the new boards:
- Three new Mikrotik router variants based on Marvell Prestera
98DX3236, a close relative of the more common Armada XP
- A reference board for the Marvell Armada 382
- Three new servers using ASpeed baseboard management controllers,
the actual machines being from Bytedance, Facebook and IBM, and one
machine using the Nuvoton NPCM750 BMC.
- The Galaxy Note 10.1 (P4) tablet, using an Exynos 4412.
- The usual set of 32-bit i.MX industrial/embedded hardware:
* Protonic WD3 (tractor e-cockpit)
* Kamstrup OMNIA Flex Concentrator (smart grid platform)
* Van der Laan LANMCU (food storage)
* Altesco I6P (vehicle inspection stations)
* PHYTEC phyBOARD-Segin/phyCORE-i.MX6UL baseboard
- DH electronics STM32MP157C DHCOM, a PicoITX carrier board for the
aleady supported DHCOM module
- Three new Allwinner SoC based single-board computers:
* NanoPi R1 (H3 based)
* FriendlyArm ZeroPi (H3 based)
* Elimo Initium SBC (S3 based)
- Ouya Game Console based on Nvidia Tegra 3
- Version 5 of the already supported Zynq Z-Turn MYIR Board
- LX2162AQDS, a reference platform for NXP Layerscape LX2162A, which
is a repackaged 16-core LX2160A
- A series of Kontron i.MX8M Mini baseboard/SoM versions
- Espressobin Ultra, a new variant of the popular Armada 3700 based
board,
- IEI Puzzle-M801, a rackmount network appliance based on Marvell
Armada 8040
- Microsoft Lumia 950 XL, a phone
- HDK855 and HDK865 Hardware development kits for Qualcomm sm8250 and
sm8150, respectively
- Three new board variants of the "Trogdor" Chromebook (sc7180)
- New board variants of the Renesas based "Kingfisher" and "HiHope"
reference boards
- Kobol Helios64, an open source NAS appliance based on Rockchips
RK3399
- Engicam PX30.Core, a SoM based on Rockchip PX30, along with a few
carrier boards"
* tag 'arm-soc-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (679 commits)
arm64: dts: sparx5: Add SGPIO devices
arm64: dts: sparx5: Add reset support
dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver
ARM: mstar: SMP support
ARM: mstar: Wire up smpctrl for SSD201/SSD202D
ARM: mstar: Add smp ctrl registers to infinity2m dtsi
ARM: mstar: Add dts for Honestar ssd201htv2
ARM: mstar: Add chip level dtsi for SSD202D
ARM: mstar: Add common dtsi for SSD201/SSD202D
ARM: mstar: Add infinity2m support
dt-bindings: mstar: Add Honestar SSD201_HT_V2 to mstar boards
dt-bindings: vendor-prefixes: Add honestar vendor prefix
dt-bindings: mstar: Add binding details for mstar,smpctrl
ARM: mstar: Fill in GPIO controller properties for infinity
ARM: mstar: Add gpio controller to MStar base dtsi
ARM: zynq: Fix incorrect reference to XM013 instead of XM011
ARM: zynq: Convert at25 binding to new description on zc770-xm013
ARM: zynq: Fix OCM mapping to be aligned with binding on zc702
ARM: zynq: Fix leds subnode name for zc702/zybo-z7
ARM: zynq: Rename bus to be align with simple-bus yaml
...
- Add vendor prefixes for bm, gpio-key, mentor, FII, and Ampere
- Add ADP5585/ADP5589 and delta,q54sj108a2 to trivial-devices.yaml
- Convert fixed-partitions, i2c-gate and fsl,dpaa2-console bindings to
schemas
- Drop PicoXcell bindings
- Drop unused and undocumented 'pnx,timeout' property from LPC32xx
- Add 'dynamic-power-coefficient' to Mali GPU bindings
- Make 'make dt_binding_check' not error out on warnings
- Various minor binding fixes
-----BEGIN PGP SIGNATURE-----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=FBOU
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Add vendor prefixes for bm, gpio-key, mentor, FII, and Ampere
- Add ADP5585/ADP5589 and delta,q54sj108a2 to trivial-devices.yaml
- Convert fixed-partitions, i2c-gate and fsl,dpaa2-console bindings to
schemas
- Drop PicoXcell bindings
- Drop unused and undocumented 'pnx,timeout' property from LPC32xx
- Add 'dynamic-power-coefficient' to Mali GPU bindings
- Make 'make dt_binding_check' not error out on warnings
- Various minor binding fixes
* tag 'devicetree-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (22 commits)
dt-bindings: mali-bifrost: Add dynamic-power-coefficient
dt-bindings: mali-midgard: Add dynamic-power-coefficient
dt-bindings: i2c: dw: cancel mandatory requirements for "#address-cells" and "#size-cells"
dt-bindings: Remove PicoXcell bindings
ARM: dts: lpc32xx: Remove unused and undocumented 'pnx,timeout'
dt-bindings: mtd: convert "fixed-partitions" to the json-schema
dt-bindings: vendor-prefixes: Add undocumented bm, gpio-key, and mentor prefixes
dt-bindings: pci: rcar-pci-ep: Document missing interrupts property
dt-bindings: vendor-prefixes: Add an entry for AmpereComputing.com
dt-bindings: vendor-prefixes: correct the spelling of TQ-Systems GmbH
dt-bindings: mfd: fix stm32 timers example
dt-bindings: trivial-devices: Add delta,q54sj108a2
dt-bindings:i2c:i2c-gate: txt to yaml conversion
dt-bindings: add ADP5585/ADP5589 entries to trivial-devices
dt-bindings: Correct GV11B GPU register sizes
dt-bindings: vendor-prefixes: Add FII
dt-bindings: Fix typo on the DesignWare IP reset bindings documentation
dt-bindings: Fix error in 'make dtbs_check' when using DT_SCHEMA_FILES
dt-bindings: arm: vt8500: remove redundant white-spaces
dt-bindings: fsl-imx-drm: fix example compatible string
...
This introduces support for controlling the TI PRU, adds hooks for
remoteproc drivers to override the default ELF based coredump format,
introduces a library function for coredumps using named sections (aka
the Qualcomm "minidump" format). It fixes a problem with inconsistent
notifications sent by the Qualcomm sysmon driver to the remote
processors and it migrates the Qualcomm MSS driver to use power-domains
for resources that aren't actually regulators. Lastly it contains a
number of fixes for minor bugs and build warnings throughout the
drivers.
-----BEGIN PGP SIGNATURE-----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=+So/
-----END PGP SIGNATURE-----
Merge tag 'rproc-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc
Pull remoteproc updates from Bjorn Andersson:
"This introduces support for controlling the TI PRU, adds hooks for
remoteproc drivers to override the default ELF based coredump format,
introduces a library function for coredumps using named sections (aka
the Qualcomm "minidump" format).
It also fixes a problem with inconsistent notifications sent by the
Qualcomm sysmon driver to the remote processors and it migrates the
Qualcomm MSS driver to use power-domains for resources that aren't
actually regulators.
Lastly it contains a number of fixes for minor bugs and build warnings
throughout the drivers"
* tag 'rproc-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: (47 commits)
remoteproc/mediatek: read IPI buffer offset from FW
remoteproc/mediatek: unprepare clk if scp_before_load fails
remoteproc: qcom: Fix potential NULL dereference in adsp_init_mmio()
remoteproc/mediatek: Fix kernel test robot warning
remoteproc: k3-dsp: Fix return value check in k3_dsp_rproc_of_get_memories()
remoteproc: qcom: pas: fix error handling in adsp_pds_enable
remoteproc: qcom: fix reference leak in adsp_start
remoteproc: q6v5-mss: fix error handling in q6v5_pds_enable
remoteproc/mtk_scp: surround DT device IDs with CONFIG_OF
remoteproc: qcom: Add minidump id for sm8150 modem
remoteproc: qcom: Add capability to collect minidumps
remoteproc: coredump: Add minidump functionality
remoteproc: core: Add ops to enable custom coredump functionality
remoteproc/mediatek: change MT8192 CFG register base
remoteproc: pru: Add support for various PRU cores on K3 J721E SoCs
remoteproc: pru: Add support for various PRU cores on K3 AM65x SoCs
remoteproc: pru: Add pru-specific debugfs support
remoteproc: pru: Add support for PRU specific interrupt configuration
remoteproc: pru: Add a PRU remoteproc driver
dt-bindings: remoteproc: Add binding doc for PRU cores in the PRU-ICSS
...
This adds a YAML description of the smpctrl node needed by the
platform code for the MStar/SigmaStar Armv7 SoCs to boot secondary cpus.
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Link: https://lore.kernel.org/r/20201201134330.3037007-2-daniel@0x0f.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm driver updates for v5.11
This adds support for the core power domains on MSM8916, MSM8939, SDM660
and SDX55. It adds SM8150 support to the last-level cache controller
driver and it makes it possible to build the Command DB and RPMh drivers
as modules.
It also contains a slew of smaller cleanups, style and bug fixes
throughout the various drivers.
* tag 'qcom-drivers-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (39 commits)
soc: qcom: rpmhpd: Add SDX55 power domains
dt-bindings: power: Add rpm power domain bindings for sdx55
soc: qcom: rpmh: Use __fill_rpmh_msg API during rpmh_write()
samples: qmi: Constify static qmi ops
soc: qcom: pdr: Constify static qmi structs
soc: qcom: initialize local variable
soc: qcom: socinfo: add soc ids for msm8953 variants
soc: qcom: geni: Remove "iova" check
soc: qcom: llcc: Add configuration data for SM8150
dt-bindings: msm: Add LLCC for SM8150
soc: qcom: rpmh: Fix possible doc-rot in rpmh_write()'s header
soc: qcom: kryo-l2-accessors: Fix misnaming of 'val'
soc: qcom: rpmhpd: Provide some missing struct member descriptions
soc: qcom: llcc-qcom: Fix expected kernel-doc formatting
soc: qcom: smp2p: Remove unused struct attribute provide another
soc: qcom: wcnss_ctrl: Demote non-conformant struct header and fix function headers
soc: qcom: smsm: Fix some kernel-doc formatting and naming problems
soc: qcom: smem: Fix formatting and missing documentation issues
soc: qcom: qcom-geni-se: Fix misnamed function parameter 'rx_rfr'
soc: qcom: qcom_aoss: Add missing description for 'cooling_devs'
...
Link: https://lore.kernel.org/r/20201130190142.345246-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. S3C bindings and DTS cleanup,
2. Correct the clock rates for SPI0 in Artik 5 which is a fix for recently
introduced Ethernet on SPI on Artik 5 board.
-----BEGIN PGP SIGNATURE-----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=7AY9
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v5.11, part three
1. S3C bindings and DTS cleanup,
2. Correct the clock rates for SPI0 in Artik 5 which is a fix for recently
introduced Ethernet on SPI on Artik 5 board.
* tag 'samsung-dt-5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Reduce assigned-clocks entries for SPI0 on Artik5 board
ARM: dts: s3c6410: correct SMDK6410 board compatible
ARM: dts: s3c24xx: add SMDK2416 board compatible
dt-bindings: arm: samsung: document S3C6410-based boards binding
dt-bindings: arm: samsung: document SMDK2416 board binding
Link: https://lore.kernel.org/r/20201207074528.4475-2-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Scarlet tablet finally gets support for its cameras, now that the
the rk3399-isp moved out of staging.
The Odroid-Go-Advance got its joystick support now that the adc-joystick
driver was merged and misc omprovements to the RockPi4, rk3328-roc-cc
and orange-pi.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAl/NIB8QHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgSkWB/9XzLgxka9y6ntWV6+dlhHJQ/KnlvFwIH0m
o/thgqAd6ns0ey0pYEpQ8Hj6piMHuNWuqIq0S6u19ssv/CPK38lpbrcx+rPnXyd5
Vvu5KiXtMILPBTz4M0wSNuUfjGtvYvud86OcFKEc8AgWHKs7S8OoxaoRWr2CE+bH
L4wMUQIsafT0iZEe/PoNl8HwfaNWbf1/5qjhW6oD+DVc0ssbWEdOwDTzwb0rgsK0
LSgxX+j/qlP57mS5b2CRot18C7meep4EvHcQII2JtHnbY7dgzuqENTI5utTj/q9c
MtwUNWOlSFUpuu4tMiPf9C29hOoQfWsaW+r9yrsO84Yl+U04TYT9
=84Fb
-----END PGP SIGNATURE-----
Merge tag 'v5.11-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
Newly added boards are the PX30 SOM system from Engicam and Kobol Helios64.
The Scarlet tablet finally gets support for its cameras, now that the
the rk3399-isp moved out of staging.
The Odroid-Go-Advance got its joystick support now that the adc-joystick
driver was merged and misc omprovements to the RockPi4, rk3328-roc-cc
and orange-pi.
* tag 'v5.11-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (28 commits)
arm64: dts: rockchip: use USB host by default on rk3399-rock-pi-4
arm64: dts: rockchip: fix I2S conflict on rk3399-rock-pi-4
arm64: dts: rockchip: fix supplies on rk3399-rock-pi-4
arm64: dts: rockchip: Fix UART pull-ups on rk3328
arm64: dts: rockchip: add isp and sensors for Scarlet
arm64: dts: rockchip: add isp0 node for rk3399
arm64: dts: rockchip: Properly define the type C connector on rk3399-orangepi
arm64: dts: rockchip: Add BT support on px30-engicam
arm64: dts: rockchip: Add WiFi support on px30-engicam
arm64: dts: rockchip: Add Engicam PX30.Core C.TOUCH 2.0 10.1" OF
dt-bindings: arm: rockchip: Add Engicam PX30.Core C.TOUCH 2.0 10.1" OF
arm64: dts: rockchip: Enable LVDS panel on px30-engicam-edimm2.2
arm64: dts: rockchip: Enable USB Host, OTG on px30-enagicam
arm64: dts: rockchip: rename sdhci nodename to mmc on rk3399
arm64: dts: rockchip: Enable analog audio on rk3328-roc-cc
arm64: dts: rockchip: Enable HDMI audio on rk3328-roc-cc
arm64: dts: rockchip: Set dr_mode to "host" for OTG on rk3328-roc-cc
arm64: dts: rockchip: Add Engicam PX30.Core C.TOUCH 2.0
arm64: dts: rockchip: Add Engicam C.TOUCH 2.0
dt-bindings: arm: rockchip: Add Engicam PX30.Core C.TOUCH 2.0
...
Link: https://lore.kernel.org/r/4278011.LvFx2qVVIh@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Quite some patches that update vendor-prefixes.yaml and fsl.yaml to
document missing board compatibles and add new board compatibles.
- A couple of patches from Dong Aisheng to update imx-scu firmware and
imx-lpcg clock bindings for new SCU two cells clock support.
- A couple of net bindings update from Ioana Ciornei to complete the
MAC/PCS/PHY representation on DPAA2 devices.
- Document watchdog compatibles for all i.MX and Layerscape devices.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl/HlOYUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM4yegf/eP6henuph6c+Ay/y7Ia4V51UY4ot
Sb9pJatgaX4GmFowfztltd//gJMtpHnYbqAsXhk2hkRZ7h0hFIIji2Dp7knq3naD
rQykAmT4eWy1CuQFq86XvFaqHc5AVuygBpMmP6nSFDBzBeqDRQ+q813aUpQdUlUH
iAeN2Ov62U+4kEc0AxF2mNNcGW1/ikKcFT5nJmJGmgUKuwSUSJ0l09MvXHhQeEjr
//gswg/5XU4tweEjAHeEJKM60XLtRFdmoLnz/0nDlLY0BXfBYRpicvNXzxDWEPOd
qdf20NOWyz2UUcmMgy1vpVJKHQumSDNxB9M0FwtkcB8+x0YjE4gB8AxUNA==
=YiM1
-----END PGP SIGNATURE-----
Merge tag 'imx-bindings-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX DT bindings update for 5.11:
- Quite some patches that update vendor-prefixes.yaml and fsl.yaml to
document missing board compatibles and add new board compatibles.
- A couple of patches from Dong Aisheng to update imx-scu firmware and
imx-lpcg clock bindings for new SCU two cells clock support.
- A couple of net bindings update from Ioana Ciornei to complete the
MAC/PCS/PHY representation on DPAA2 devices.
- Document watchdog compatibles for all i.MX and Layerscape devices.
* tag 'imx-bindings-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (35 commits)
dt-bindings: arm: fsl: add Protonic WD3 board
dt-bindings: vendor-prefixes: add "virtual" prefix
dt-bindings: fsl: add kamstrup flex concentrator to schema
dt-bindings: arm: fsl: document i.MX7S boards
dt-bindings: arm: fsl: document SolidRun LX2160A boards
dt-bindings: arm: fsl: document LS1012A FRWY board
dt-bindings: arm: fsl: add Van der Laan LANMCU board
dt-bindings: arm: fsl: add Altesco I6P board
dt-bindings: vendor-prefixes: Add an entry for Altus-Escon-Company
dt-bindings: net: add the 10gbase-r connection type
dt-bindings: net: add the DPAA2 MAC DTS definition
dt-bindings: fsl: add compatible for LX2162A QDS Board
dt-bindings: vendor-prefixes: Add an entry for Van der Laan b.v.
dt-bindings: arm: fsl: document i.MX7D boards
dt-bindings: arm: fsl: document i.MX6ULL boards
dt-bindings: arm: fsl: document i.MX6UL boards
dt-bindings: arm: fsl: document i.MX6SX boards
dt-bindings: arm: fsl: document i.MX6SL boards
dt-bindings: arm: fsl: document i.MX6QP boards
dt-bindings: arm: fsl: document i.MX6Q boards
...
Link: https://lore.kernel.org/r/20201202142717.9262-3-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Add devicetree of Samsung Galaxy Note 10.1 tablets
(GT-N8010/GT-N8013), called P4 Note. These are quite old but
still functional devices, based on Exynos4412.
2. Minor cleanups in Odroid XU3 Ethernet.
3. Minor fixes: ADC io-channel-ranges and P4 Note touchscreen GPIO
polarity.
-----BEGIN PGP SIGNATURE-----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=FN69
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v5.11, part two
1. Add devicetree of Samsung Galaxy Note 10.1 tablets
(GT-N8010/GT-N8013), called P4 Note. These are quite old but
still functional devices, based on Exynos4412.
2. Minor cleanups in Odroid XU3 Ethernet.
3. Minor fixes: ADC io-channel-ranges and P4 Note touchscreen GPIO
polarity.
* tag 'samsung-dt-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: switch Atmel mxt reset GPIO to active low on P4 Note
ARM: dts: s5pv210: Drop unneeded io-channel-ranges property in Aries
ARM: dts: s5pv210: Drop incorrect use of io-channel-ranges property
ARM: dts: exynos: Drop incorrect use of io-channel-ranges
ARM: dts: exynos: add Samsung's Exynos4412-based P4 Note boards
dt-bindings: arm: samsung: document bindings for P4 Note family board
ARM: dts: exynos: Add an alias for the Ethernet interface on Odroid XU3
ARM: dts: exynos: Fix Ethernet interface description on Odroid XU3
Link: https://lore.kernel.org/r/20201201204404.22675-2-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
for 5.11, please pull the following:
- Rafal adds initial support for the Broadcom 4908 which are SoCs used
in home routers and are based on the DSL architecture and using
Broadcom Brahma-B53 CPUs.
-----BEGIN PGP SIGNATURE-----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=oz5b
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.11/devicetree-arm64' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 5.11, please pull the following:
- Rafal adds initial support for the Broadcom 4908 which are SoCs used
in home routers and are based on the DSL architecture and using
Broadcom Brahma-B53 CPUs.
* tag 'arm-soc/for-5.11/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: add config for Broadcom BCM4908 SoCs
arm64: dts: broadcom: add BCM4908 and Asus GT-AC5300 early DTS files
dt-bindings: arm: bcm: document BCM4908 bindings
Link: https://lore.kernel.org/r/20201128163410.1691529-4-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add Kamstrup OMNIA Flex Concentrator compatibles to the schema
so we can make use of them for the validation.
Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
C.TOUCH 2.0 is a general purpose carrier board with capacitive
touch interface support.
10.1" OF is a capacitive touch 10.1" Open Frame panel solutions.
PX30.Core needs to mount on top of C.TOUCH 2.0 carrier with pluged
10.1" OF for creating complete PX30.Core C.TOUCH 2.0 10.1" Open Frame.
Add bindings for it.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20201109181017.206834-4-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Two main additions this time:
1. Support for SCMI v3.0 sensor extensions
2. Support for voltage domain management protocol added newly to SCMI v3.0
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEunHlEgbzHrJD3ZPhAEG6vDF+4pgFAl+89d8ACgkQAEG6vDF+
4phtNQ/9E0S1gRMVWSIgKh3K/DeqwZuUyBofOYpAOxp6pJr+as6ILK7h/62OVLHi
02VenSHkeeDdQwXdrXNAee3TBofiWPXpar2laPcGacREhYPb4c5xeuGa1ygvUt0s
h6Ot9GsOniPLtDRx0LStIE6jSEZzee8mCkK5rW1lt9zEpcq+zf7ull43qDbfeNNd
uqOBgqzQS/Ngy05Iqf86uMp6zGD21lLmubmzMPIrZoTuqiGdaT7skCEEvlCdwhxU
EqCvQ3xdQYTLAEPNExj5RGJ77JiHYEzhexNlxFdcBQYkfhR48xesTxiZrWd0Z9dc
zJO0wkQSsZ+neMFPy12OtJVd/nKugFzDk0OXejtlKc7Wt4NpnVI6jCNI/ZdFidsW
SCKbyWFufCgA/vwD4Sx/0du7aTSHhJYweQxSWvG5/WE4lxWdBPnaQY/SMTIWbvDd
jw9RbWrzRiXU8fHqOmtKsfbBnEueHhZ9fR35DlAowoD+lJIWZlWcPcY7hJdTCOnw
vI/NrTbt9wImQqA6G0yWAAqZpj2qdWn3rfvBeHM8oFXCtrbFi4fbKay/jfz0MhQE
BacJQFe30bvhV0vANNdY1lABdjSqajRit693SJlle2oc3qQsQe79DfI2x5axKP/I
T6eZCRp+PN/hY4l2Rvij1g62HjCsDgfQ+ENfjuJsAjN1VPEcXiI=
=8amn
-----END PGP SIGNATURE-----
Merge tag 'scmi-updates-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/drivers
ARM SCMI updates for v5.11
Two main additions this time:
1. Support for SCMI v3.0 sensor extensions
2. Support for voltage domain management protocol added newly to SCMI v3.0
* tag 'scmi-updates-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Remove residual _le structs naming
firmware: arm_scmi: Add SCMI v3.0 sensor notifications
firmware: arm_scmi: Add SCMI v3.0 sensor configuration support
firmware: arm_scmi: Add SCMI v3.0 sensors timestamped reads
hwmon: (scmi) Update hwmon internal scale data type
firmware: arm_scmi: Add support to enumerated SCMI voltage domain device
firmware: arm_scmi: Add voltage domain management protocol support
dt-bindings: arm: Add support for SCMI Regulators
firmware: arm_scmi: Add SCMI v3.0 sensors descriptors extensions
firmware: arm_scmi: Add full list of sensor type enumeration
firmware: arm_scmi: Rework scmi_sensors_protocol_init
firmware: arm_scmi: Fix missing destroy_workqueue()
Link: https://lore.kernel.org/r/20201124122412.22386-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl+fOigeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGoQ0H/RLJU2FMIjO0mzLX
9LqePQ9QmNWG4KeqxwWaKq90MinIbnSG3CDPKruu8RNh2Rr6nsEJmqg1DWyEiFRB
8gzsBXMAC1i2aPfOrOnCJEfP+L+svKlbSii475tNdZw2DhP+/FBT0RVCt3rRhrRs
atc8+dM7ViGLnlvRJ4LlVqA3d1kjOr5bsPYcIcnGIHY8mYWBLFzTSVgDdrcB9+3l
7lZud/zMhJ3dS0bcnbIUS1YpBxHCsgEaMFQYmcv3RruIaaFbh5THkfQUSmbmrAru
/EeVjwVMuvpvb2jxS1ofLx2in7t4tsNgItu4AfMmV0BurM5NhpqKo7mo/1nmR/X9
Q4tjPRc=
=cUbb
-----END PGP SIGNATURE-----
Backmerge tag 'v5.10-rc2' into arm/drivers
The SCMI pull request for the arm/drivers branch requires v5.10-rc2
because of dependencies with other git trees, so merge that in here.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This contains a couple of conversions of bindings to json-schema, as
well as symbolic names for the various memory clients on Tegra20,
Tegra30 and Tegra124. There's also a couple of fixes for Tegra194
pinmux and ARM GIC bindings. Finally, a new vendor prefix is added
for Ouya and the Ouya game console compatible string is defined.
-----BEGIN PGP SIGNATURE-----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=UKyi
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.11-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
dt-bindings: Changes for v5.11-rc1
This contains a couple of conversions of bindings to json-schema, as
well as symbolic names for the various memory clients on Tegra20,
Tegra30 and Tegra124. There's also a couple of fixes for Tegra194
pinmux and ARM GIC bindings. Finally, a new vendor prefix is added
for Ouya and the Ouya game console compatible string is defined.
* tag 'tegra-for-5.11-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: bus: Convert ACONNECT doc to json-schema
dt-bindings: interrupt-controller: arm,gic: Update Tegra compatibles
dt-bindings: dma: Convert ADMA doc to json-schema
dt-bindings: Fix entry name for I/O High Voltage property
dt-bindings: ARM: tegra: Add Ouya game console
dt-bindings: Add vendor prefix for Ouya Inc.
dt-bindings: memory: tegra124: Add memory client IDs
dt-bindings: memory: tegra30: Add memory client IDs
dt-bindings: memory: tegra20: Add memory client IDs
Link: https://lore.kernel.org/r/20201127144329.124891-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Highlights:
----------
MCU part:
-Fix dmamux reg property (length) on stm32h743.
-Explicitly set DCMI bus type on stm32429i eval board.
MPU part:
-Enable FIFO mode with half-full threshold for DCMI.
-Harmonize EHCI/OHCI nodes.
-Move SDMMC IP version to v2.0 to get features improvements.
-Add LP-timer wakeup support.
-Enable crypto/hash/crc support.
-Explicitly set DCMI bus type on stm32mp157 eval board.
-Add USB type-c controller (STUSB1600) on stm32mp15 DK boards
(It is connected to I2C4).
-Fix dmamux reg property (length) on stm32mp151.
-Optimize USB OTG FIFO sizes on stm32mp151.
-Declare tamp node also as "simple-mfd".
-LXA:
-Document Octavo vendor-prefixes yaml file.
-Document lxa,stm32mp157c-mc1 in STM32 yaml file.
-DH:
-Connect PHY IRQ line on DH SoM.
-Add KS8851 Ethernet support on DHCOM which is mapped to FMC2.
-Document all DH compatible strings in STM32 yaml file.
-Add DHCOM based PicoITX board. This board embedds ethernet port,
USB, CAN LEDS and a custom board-to-board connector.
-----BEGIN PGP SIGNATURE-----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=O+Lk
-----END PGP SIGNATURE-----
Merge tag 'stm32-dt-for-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt
STM32 DT updates for v5.11, round 1
Highlights:
----------
MCU part:
-Fix dmamux reg property (length) on stm32h743.
-Explicitly set DCMI bus type on stm32429i eval board.
MPU part:
-Enable FIFO mode with half-full threshold for DCMI.
-Harmonize EHCI/OHCI nodes.
-Move SDMMC IP version to v2.0 to get features improvements.
-Add LP-timer wakeup support.
-Enable crypto/hash/crc support.
-Explicitly set DCMI bus type on stm32mp157 eval board.
-Add USB type-c controller (STUSB1600) on stm32mp15 DK boards
(It is connected to I2C4).
-Fix dmamux reg property (length) on stm32mp151.
-Optimize USB OTG FIFO sizes on stm32mp151.
-Declare tamp node also as "simple-mfd".
-LXA:
-Document Octavo vendor-prefixes yaml file.
-Document lxa,stm32mp157c-mc1 in STM32 yaml file.
-DH:
-Connect PHY IRQ line on DH SoM.
-Add KS8851 Ethernet support on DHCOM which is mapped to FMC2.
-Document all DH compatible strings in STM32 yaml file.
-Add DHCOM based PicoITX board. This board embedds ethernet port,
USB, CAN LEDS and a custom board-to-board connector.
* tag 'stm32-dt-for-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (34 commits)
ARM: dts: stm32: lxa-mc1: add OSD32MP15x to list of compatibles
dt-bindings: arm: stm32: add extra SiP compatible for lxa,stm32mp157c-mc1
dt-bindings: vendor-prefixes: document Octavo Systems oct prefix
ARM: dts: stm32: Add DHCOM based PicoITX board
dt-bindings: arm: stm32: Add compatible strings for DH SoMs and boards
ARM: dts: stm32: support child mfd cells for the stm32mp1 TAMP syscon
dt-bindings: arm: stm32: add simple-mfd compatible for tamp node
ARM: dts: stm32: update stm32mp151 for remote proc synchronization support
ARM: dts: stm32: adjust USB OTG gadget fifo sizes in stm32mp151
ARM: dts: stm32: fix dmamux reg property on stm32h743
ARM: dts: stm32: fix dmamux reg property on stm32mp151
ARM: dts: stm32: fix mdma1 clients channel priority level on stm32mp151
ARM: dts: stm32: add STUSB1600 Type-C using I2C4 on stm32mp15xx-dkx
dt-bindings: usb: Add DT bindings for STUSB160x Type-C controller
dt-bindings: connector: add typec-power-opmode property to usb-connector
ARM: dts: stm32: reorder spi4 within stm32mp15-pinctrl
ARM: dts: stm32: set bus-type in DCMI endpoint for stm32429i-eval board
ARM: dts: stm32: set bus-type in DCMI endpoint for stm32mp157c-ev1 board
ARM: dts: stm32: enable CRYP by default on stm32mp15
ARM: dts: stm32: enable CRC1 by default on stm32mp15
...
Link: https://lore.kernel.org/r/873c17a5-28d5-9261-f691-1b917611c932@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add a binding for the Tegra30-based Ouya game console.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Linux Automation MC-1 is built around an OSD32MP15x SiP with CPU,
RAM, PMIC, Oscillator and EEPROM. Adjust the binding, so the SiP
compatible is contained as well. This allows boot firmware to match
against it to apply fixups if necessary.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
The stm32mp1 TAMP (Tamper and backup registers) does tamper detection
and features 32 backup registers that, being in the RTC domain, may
survive even with Vdd switched off.
This makes it suitable for use to communicate a reboot mode from OS
to bootloader via the syscon-reboot-mode binding. Add a "simple-mfd"
to support probing such a child node. The actual reboot mode
node could then be defined in a board.dts or fixed up by the bootloader.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
BCM4908 is a new family that includes BCM4906, BCM4908 and BCM49408.
It's mostly used in home routers and often replaces Northstar in vendors
portfolio.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Add devicetree bindings to support regulators based on SCMI Voltage
Domain Protocol.
Link: https://lore.kernel.org/r/20201119191051.46363-5-cristian.marussi@arm.com
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Document the GT-N8010/GT-N8013 device binding and the P4 Note common
binding that it is based on.
Signed-off-by: Martin Jücker <martin.juecker@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201113212525.13455-2-martin.juecker@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Document and adjust the compatibles for i.MX7S based boards.
The Toradex boards use multiple compatibles.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Document the compatible for SolidRun LX2160A based boards.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Document the compatible for LS1012A FRWY board.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add Van der Laan LANMCU iMX6dl based board
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
C.TOUCH 2.0 is a general purpose carrier board with capacitive
touch interface support.
PX30.Core needs to mount on top of this Carrier board for creating
complete PX30.Core C.TOUCH 2.0 board.
Add bindings for it.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200929083217.25406-6-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive
Evaluation Board from Engicam.
PX30.Core needs to mount on top of this Evaluation board for
creating complete PX30.Core EDIMM2.2 Starter Kit.
Add bindings for it.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200929083217.25406-2-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Document the new board by Kobol introduced recently in
rockchip/rk3399-kobol-helios64.dts.
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201102150658.167161-1-uwe@kleine-koenig.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Document EMC DFS OPP table and interconnect paths that will be used
for scaling of system's memory bandwidth based on memory utilization
statistics. Previously ACTMON was supposed to drive EMC clock rate
directly, but now it should do it using interconnect framework in order
to support shared voltage scaling in addition to the frequency scaling.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201104164923.21238-16-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The NanoPi R1 is a complete open source board developed
by FriendlyElec for makers, hobbyists, fans and etc.
NanoPi R1 key features
- Allwinner H3, Quad-core Cortex-A7@1.2GHz
- 512MB/1GB DDR3 RAM
- 8GB eMMC
- microSD slot
- 10/100/1000M Ethernet x 1
- 10/100 Ethernet x 1
- Wifi 802.11b/g/n
- Bluetooth 4.0
- Serial Debug Port
- 5V 2A DC power-supply
Signed-off-by: Yu-Tung Chang <mtwget@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20201102100157.85801-2-mtwget@gmail.com
Add support for LX2162A, LX2162A is LX2160A based SoC.
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Document the use of the Kingfisher expansion board with the R-Car
Starter Kit Pro equipped with an R-Car M3-W+ (aka M3-ES3.0) SoC.
Inspired from v5.5 commit 24169f0a45 ("dt-bindings: arm: renesas:
Add R-Car M3-N ULCB with Kingfisher").
Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Link: https://lore.kernel.org/r/20201030083051.18752-4-erosca@de.adit-jv.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
