When doing an asynchronous page flip (PAGE_FLIP ioctl with the
DRM_MODE_PAGE_FLIP_ASYNC flag set), the current code waits for the
possible GPU buffer being rendered through a call to
vc4_queue_seqno_cb().
On the BCM2835-37, the GPU driver is part of the vc4 driver and that
function is defined in vc4_gem.c to wait for the buffer to be rendered,
and once it's done, call a callback.
However, on the BCM2711 used on the RaspberryPi4, the GPU driver is
separate (v3d) and that function won't do anything. This was working
because we were going into a path, due to uninitialized variables, that
was always scheduling the callback.
However, we were never actually waiting for the buffer to be rendered
which was resulting in frames being displayed out of order.
The generic API to signal those kind of completion in the kernel are the
DMA fences, and fortunately the v3d drivers supports them and signal
when its job is done. That API also provides an equivalent function that
allows to have a callback being executed when the fence is signalled as
done.
Let's change our driver a bit to rely on the previous function for the
older SoCs, and on DMA fences for the BCM2711.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Link: https://lore.kernel.org/r/20220610115149.964394-14-maxime@cerno.tech
The function vc4_async_page_flip() handles asynchronous page-flips in
the vc4 driver.
However, it mixes some generic code with code that should only be run on
older generations that have the GPU handled by the vc4 driver.
Let's split the generic part out of vc4_async_page_flip() and into a
common function that we be reusable by an handler made for the BCM2711.
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220610115149.964394-12-maxime@cerno.tech
On the BCM2711, we currently call the vc4_bo_cache_init() and
vc4_gem_init() functions. These functions initialize the BO and GEM
backends.
However, this code was initially created to accomodate the requirements
of the GPU on the older SoCs, while the BCM2711 has a separate driver
for it. So let's just skip these calls when we're on a newer hardware.
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220610115149.964394-9-maxime@cerno.tech
On the BCM2711, our current definition of drm_plane_helper_funcs uses
the custom vc4_prepare_fb() and vc4_cleanup_fb().
Those functions rely on the buffer allocation path that was relying on
the GPU, and is no longer relevant.
Let's create another drm_plane_helper_funcs structure that we will
register on the BCM2711.
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220610115149.964394-8-maxime@cerno.tech
On the BCM2711, our current definition of drm_mode_config_funcs uses the
custom vc4_fb_create().
However, that function relies on the buffer allocation path that was
relying on the GPU, and is no longer relevant.
Let's create another drm_mode_config_funcs structure that we will
register on the BCM2711.
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220610115149.964394-7-maxime@cerno.tech
Prior to the BCM2711/RaspberryPi4, the GPU was a part of the display
components of the SoC. It was thus a part of the vc4 driver.
However, with the BCM2711, it got split out and thus the v3d driver was
created. The vc4 driver now only handles the display part.
We didn't properly split out the code when doing the BCM2711 support
though, and most of the code around buffer allocations is still
involved, even though it doesn't have the backing hardware anymore.
Let's start the split out by creating a new drm_driver that only reports
and uses what we support on the BCM2711. The ioctl were properly
filtered already, but we were still exposing a .gem_create_object hook,
as well as having an .open and .postclose hooks which are only relevant
on older generations.
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220610115149.964394-6-maxime@cerno.tech
The vc4_bo_dumb_create() both fixes up the allocation arguments to match
the hardware constraints and actually performs the allocation.
Since we're going to introduce a new function that uses a different
allocator, let's split the arguments fixup to a separate function we
will be able to reuse.
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220610115149.964394-5-maxime@cerno.tech
A new generation of controller has been introduced with the
BCM2711/RaspberryPi4. This generation needs a bunch of quirks, and over
time we've piled on a number of checks in most parts of the drivers.
All these checks are performed several times, and are not always
consistent. Let's create a single, global, variable to hold it and use
it everywhere.
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220610115149.964394-3-maxime@cerno.tech
The vc4 planes are setup in hardware by creating a hardware descriptor
in a dedicated RAM. As part of the process to setup a plane in KMS, we
thus need to allocate some part of that dedicated RAM to store our
descriptor there.
The async update path will just reuse the descriptor already allocated
for that plane and will modify it directly in RAM to match whatever has
been asked for.
In order to do that, it will compare the descriptor for the old plane
state and the new plane state, will make sure they fit in the same size,
and check that only the position or buffer address have changed.
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220610115149.964394-2-maxime@cerno.tech
Pull drm updates from Dave Airlie:
"Intel have enabled DG2 on certain SKUs for laptops, AMD has started
some new GPU support, msm has user allocated VA controls
dma-buf:
- add dma_resv_replace_fences
- add dma_resv_get_singleton
- make dma_excl_fence private
core:
- EDID parser refactorings
- switch drivers to drm_mode_copy/duplicate
- DRM managed mutex initialization
display-helper:
- put HDMI, SCDC, HDCP, DSC and DP into new module
gem:
- rework fence handling
ttm:
- rework bulk move handling
- add common debugfs for resource managers
- convert to kvcalloc
format helpers:
- support monochrome formats
- RGB888, RGB565 to XRGB8888 conversions
fbdev:
- cfb/sys_imageblit fixes
- pagelist corruption fix
- create offb platform device
- deferred io improvements
sysfb:
- Kconfig rework
- support for VESA mode selection
bridge:
- conversions to devm_drm_of_get_bridge
- conversions to panel_bridge
- analogix_dp - autosuspend support
- it66121 - audio support
- tc358767 - DSI to DPI support
- icn6211 - PLL/I2C fixes, DT property
- adv7611 - enable DRM_BRIDGE_OP_HPD
- anx7625 - fill ELD if no monitor
- dw_hdmi - add audio support
- lontium LT9211 support, i.MXMP LDB
- it6505: Kconfig fix, DPCD set power fix
- adv7511 - CEC support for ADV7535
panel:
- ltk035c5444t, B133UAN01, NV3052C panel support
- DataImage FG040346DSSWBG04 support
- st7735r - DT bindings fix
- ssd130x - fixes
i915:
- DG2 laptop PCI-IDs ("motherboard down")
- Initial RPL-P PCI IDs
- compute engine ABI
- DG2 Tile4 support
- DG2 CCS clear color compression support
- DG2 render/media compression formats support
- ATS-M platform info
- RPL-S PCI IDs added
- Bump ADL-P DMC version to v2.16
- Support static DRRS
- Support multiple eDP/LVDS native mode refresh rates
- DP HDR support for HSW+
- Lots of display refactoring + fixes
- GuC hwconfig support and query
- sysfs support for multi-tile
- fdinfo per-client gpu utilisation
- add geometry subslices query
- fix prime mmap with LMEM
- fix vm open count and remove vma refcounts
- contiguous allocation fixes
- steered register write support
- small PCI BAR enablement
- GuC error capture support
- sunset igpu legacy mmap support for newer devices
- GuC version 70.1.1 support
amdgpu:
- Initial SoC21 support
- SMU 13.x enablement
- SMU 13.0.4 support
- ttm_eu cleanups
- USB-C, GPUVM updates
- TMZ fixes for RV
- RAS support for VCN
- PM sysfs code cleanup
- DC FP rework
- extend CG/PG flags to 64-bit
- SI dpm lockdep fix
- runtime PM fixes
amdkfd:
- RAS/SVM fixes
- TLB flush fixes
- CRIU GWS support
- ignore bogus MEC signals more efficiently
msm:
- Fourcc modifier for tiled but not compressed layouts
- Support for userspace allocated IOVA (GPU virtual address)
- DPU: DSC (Display Stream Compression) support
- DP: eDP support
- DP: conversion to use drm_bridge and drm_bridge_connector
- Merge DPU1 and MDP5 MDSS driver
- DPU: writeback support
nouveau:
- make some structures static
- make some variables static
- switch to drm_gem_plane_helper_prepare_fb
radeon:
- misc fixes/cleanups
mxsfb:
- rework crtc mode setting
- LCDIF CRC support
etnaviv:
- fencing improvements
- fix address space collisions
- cleanup MMU reference handling
gma500:
- GEM/GTT improvements
- connector handling fixes
komeda:
- switch to plane reset helper
mediatek:
- MIPI DSI improvements
omapdrm:
- GEM improvements
qxl:
- aarch64 support
vc4:
- add a CL submission tracepoint
- HDMI YUV support
- HDMI/clock improvements
- drop is_hdmi caching
virtio:
- remove restriction of non-zero blob types
vmwgfx:
- support for cursormob and cursorbypass 4
- fence improvements
tidss:
- reset DISPC on startup
solomon:
- SPI support
- DT improvements
sun4i:
- allwinner D1 support
- drop is_hdmi caching
imx:
- use swap() instead of open-coding
- use devm_platform_ioremap_resource
- remove redunant initializations
ast:
- Displayport support
rockchip:
- Refactor IOMMU initialisation
- make some structures static
- replace drm_detect_hdmi_monitor with drm_display_info.is_hdmi
- support swapped YUV formats,
- clock improvements
- rk3568 support
- VOP2 support
mediatek:
- MT8186 support
tegra:
- debugabillity improvements"
* tag 'drm-next-2022-05-25' of git://anongit.freedesktop.org/drm/drm: (1740 commits)
drm/i915/dsi: fix VBT send packet port selection for ICL+
drm/i915/uc: Fix undefined behavior due to shift overflowing the constant
drm/i915/reg: fix undefined behavior due to shift overflowing the constant
drm/i915/gt: Fix use of static in macro mismatch
drm/i915/audio: fix audio code enable/disable pipe logging
drm/i915: Fix CFI violation with show_dynamic_id()
drm/i915: Fix 'mixing different enum types' warnings in intel_display_power.c
drm/i915/gt: Fix build error without CONFIG_PM
drm/msm/dpu: handle pm_runtime_get_sync() errors in bind path
drm/msm/dpu: add DRM_MODE_ROTATE_180 back to supported rotations
drm/msm: don't free the IRQ if it was not requested
drm/msm/dpu: limit writeback modes according to max_linewidth
drm/amd: Don't reset dGPUs if the system is going to s2idle
drm/amdgpu: Unmap legacy queue when MES is enabled
drm: msm: fix possible memory leak in mdp5_crtc_cursor_set()
drm/msm: Fix fb plane offset calculation
drm/msm/a6xx: Fix refcount leak in a6xx_gpu_init
drm/msm/dsi: don't powerup at modeset time for parade-ps8640
drm/rockchip: Change register space names in vop2
dt-bindings: display: rockchip: make reg-names mandatory for VOP2
...
drivers/gpu/drm/vc4/vc4_hdmi.c: In function ‘vc4_hdmi_connector_detect’:
drivers/gpu/drm/vc4/vc4_hdmi.c:228:7: error: implicit declaration of function ‘gpiod_get_value_cansleep’; did you mean ‘gpio_get_value_cansleep’? [-Werror=implicit-function-declaration]
if (gpiod_get_value_cansleep(vc4_hdmi->hpd_gpio))
^~~~~~~~~~~~~~~~~~~~~~~~
gpio_get_value_cansleep
CC [M] drivers/gpu/drm/vc4/vc4_validate.o
CC [M] drivers/gpu/drm/vc4/vc4_v3d.o
CC [M] drivers/gpu/drm/vc4/vc4_validate_shaders.o
CC [M] drivers/gpu/drm/vc4/vc4_debugfs.o
drivers/gpu/drm/vc4/vc4_hdmi.c: In function ‘vc4_hdmi_bind’:
drivers/gpu/drm/vc4/vc4_hdmi.c:2883:23: error: implicit declaration of function ‘devm_gpiod_get_optional’; did you mean ‘devm_clk_get_optional’? [-Werror=implicit-function-declaration]
vc4_hdmi->hpd_gpio = devm_gpiod_get_optional(dev, "hpd", GPIOD_IN);
^~~~~~~~~~~~~~~~~~~~~~~
devm_clk_get_optional
drivers/gpu/drm/vc4/vc4_hdmi.c:2883:59: error: ‘GPIOD_IN’ undeclared (first use in this function); did you mean ‘GPIOF_IN’?
vc4_hdmi->hpd_gpio = devm_gpiod_get_optional(dev, "hpd", GPIOD_IN);
^~~~~~~~
GPIOF_IN
drivers/gpu/drm/vc4/vc4_hdmi.c:2883:59: note: each undeclared identifier is reported only once for each function it appears in
cc1: all warnings being treated as errors
Fixes: 6800234cee ("drm/vc4: hdmi: Convert to gpiod")
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220510135148.247719-1-tanghui20@huawei.com
- Fourcc modifier for tiled but not compressed layouts
- Support for userspace allocated IOVA (GPU virtual address)
- Devfreq clamp_to_idle fix
- DPU: DSC (Display Stream Compression) support
- DPU: inline rotation support on SC7280
- DPU: update DP timings to follow vendor recommendations
- DP, DPU: add support for wide bus (on newer chipsets)
- DP: eDP support
- Merge DPU1 and MDP5 MDSS driver, make dpu/mdp device the master
component
- MDSS: optionally reset the IP block at the bootup to drop
bootloader state
- Properly register and unregister internal bridges in the DRM framework
- Complete DPU IRQ cleanup
- DP: conversion to use drm_bridge and drm_bridge_connector
- eDP: drop old eDP parts again
- DPU: writeback support
- Misc small fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvJCr_1D8d0dgmyQC5HD4gmXeZw=bFV_CNCfceZbpMxRw@mail.gmail.com
Linux 5.18-rc5
There was a build fix for arm I wanted in drm-next, so backmerge rather then cherry-pick.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Clients of drm_writeback_connector_init() initialize the
possible_crtcs and then invoke the call to this API.
To simplify things, allow passing possible_crtcs as a parameter
to drm_writeback_connector_init() and make changes to the
other drm drivers to make them compatible with this change.
changes in v2:
- split the changes according to their functionality
changes in v3:
- allow passing possible_crtcs for existing users of
drm_writeback_connector_init()
- squash the vendor changes into the same commit so
that each patch in the series can compile individually
changes in v4:
- keep only changes related to possible_crtcs
- add line breaks after ARRAY_SIZE
- stop using temporary variables for possible_crtcs
changes in v5:
- None
changes in v6:
- None
changes in v7:
- wrap long lines to match the coding style of existing drivers
- Fix indentation and remove parenthesis where not needed
- use u32 instead of uint32_t for possible_crtcs
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Patchwork: https://patchwork.freedesktop.org/patch/483501/
Link: https://lore.kernel.org/r/1650984096-9964-2-git-send-email-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
SCDC is the Status and Control Data Channel for HDMI. Move the SCDC
helpers into display/ and split the header into files for core and
helpers. Update all affected drivers. No functional changes.
To avoid the proliferation of Kconfig options, SCDC is part of DRM's
support for HDMI. If necessary, a new option could make SCDC an
independent feature.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-9-tzimmermann@suse.de
Move DRM's HMDI helpers into the display/ subdirectoy and add it
to DRM's display helpers. Update all affected drivers. No functional
changes.
The HDMI helpers were implemented in the EDID and connector code, but
are actually unrelated. With the move to the display-helper library, we
can remove the dependency on drm_edid.{c,h} in some driver's HDMI source
files.
Several of the HDMI helpers remain in EDID code because both share parts
of their implementation internally. With better refractoring of the EDID
code, those HDMI helpers could be moved into the display-helper library
as well.
v3:
* fix Kconfig dependencies (Javier)
v2:
* reduce HDMI helpers to avoid exporting functions (Jani)
* fix include statements (Jani, Javier)
* update Kconfig symbols
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-8-tzimmermann@suse.de
Once EDID is parsed, the monitor HDMI support information is cached in
drm_display_info.is_hdmi by drm_parse_hdmi_vsdb_video().
This driver calls drm_detect_hdmi_monitor() to receive the same
information and stores its own cached value in
vc4_hdmi_encoder.hdmi_monitor, which is less efficient.
Avoid calling drm_detect_hdmi_monitor() and use drm_display_info.is_hdmi
instead. This also allows to remove vc4_hdmi_encoder.hdmi_monitor.
drm_detect_hdmi_monitor() is called in vc4_hdmi_connector_detect() and
vc4_hdmi_connector_get_modes(). In both cases it is safe to rely on
drm_display_info.is_hdmi as shown by ftrace:
$ sudo trace-cmd record -p function_graph -l "vc4_hdmi_*" -l "drm_*"
vc4_hdmi_connector_detect:
vc4_hdmi_connector_detect() {
drm_get_edid() {
drm_connector_update_edid_property() {
drm_add_display_info() {
drm_reset_display_info();
drm_for_each_detailed_block.part.0();
drm_parse_cea_ext() {
drm_find_cea_extension();
drm_parse_hdmi_vsdb_video();
/* drm_display_info.is_hdmi is cached here */
}
}
}
}
/* drm_display_info.is_hdmi is used here */
}
vc4_hdmi_connector_get_modes:
vc4_hdmi_connector_get_modes() {
drm_get_edid() {
drm_connector_update_edid_property() {
drm_add_display_info() {
drm_reset_display_info();
drm_for_each_detailed_block.part.0();
drm_parse_cea_ext() {
drm_find_cea_extension();
drm_parse_hdmi_vsdb_video();
/* drm_display_info.is_hdmi is cached here */
}
}
}
}
/* drm_display_info.is_hdmi is used here */
drm_connector_update_edid_property();
}
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220420114500.187664-2-jose.exposito89@gmail.com
If CONFIG_DRM_VC4=y, CONFIG_RASPBERRYPI_FIRMWARE=m, CONFIG_COMPILE_TEST=n,
bulding fails:
drivers/gpu/drm/vc4/vc4_drv.o: In function `vc4_drm_bind':
vc4_drv.c:(.text+0x320): undefined reference to `rpi_firmware_get'
vc4_drv.c:(.text+0x320): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `rpi_firmware_get'
vc4_drv.c:(.text+0x34c): undefined reference to `rpi_firmware_property'
vc4_drv.c:(.text+0x34c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `rpi_firmware_property'
vc4_drv.c:(.text+0x354): undefined reference to `rpi_firmware_put'
vc4_drv.c:(.text+0x354): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `rpi_firmware_put'
Make DRM_VC4 depends on RASPBERRYPI_FIRMWARE || (COMPILE_TEST && !RASPBERRYPI_FIRMWARE) to fix this.
Fixes: c406ad5e4a ("drm/vc4: Notify the firmware when DRM is in charge")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220411024325.3968413-1-zhengbin13@huawei.com
If we use a format that has padding instead of the alpha component (such
as XRGB8888), it appears that the Transposer will fill the padding to 0,
disregarding what was stored in the input buffer padding.
This leads to issues with IGT, since it will set the padding to 0xff,
but will then compare the CRC of the two frames which will thus fail.
Another nice side effect is that it is now possible to just use the
buffer as ARGB.
Fixes: 008095e065 ("drm/vc4: Add support for the transposer block")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20220328153659.2382206-4-maxime@cerno.tech
The TXP_VSTART_AT_EOF will generate a second VSTART signal to the HVS.
However, the HVS waits for VSTART to enable the FIFO and will thus start
filling the FIFO before the start of the frame.
This leads to corruption at the beginning of the first frame, and
content from the previous frame at the beginning of the next frames.
Since one VSTART is enough, let's get rid of it.
Fixes: 008095e065 ("drm/vc4: Add support for the transposer block")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20220328153659.2382206-3-maxime@cerno.tech
By default, the HVS driver will force the HVS output 3 to be muxed to
the HVS channel 2. However, the Transposer can only be assigned to the
HVS channel 2, so whenever we try to use the writeback connector, we'll
mux its associated output (Output 2) to the channel 2.
This leads to both the output 2 and 3 feeding from the same channel,
which is explicitly discouraged in the documentation.
In order to avoid this, let's reset all the output muxes to their reset
value.
Fixes: 87ebcd42fb ("drm/vc4: crtc: Assign output to channel automatically")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20220328153659.2382206-2-maxime@cerno.tech
The commit 73511edf8b ("dma-buf: specify usage while adding fences to
dma_resv obj v7") ported all the DRM drivers to use the newer fence API
that specifies the usage with the enum dma_resv_usage rather than doing
an explicit shared / exclusive distinction.
But the commit didn't do it properly in two callers of the vc4 driver,
leading to build errors.
Fixes: 73511edf8b ("dma-buf: specify usage while adding fences to dma_resv obj v7")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220407131950.915091-1-javierm@redhat.com
Instead of distingting between shared and exclusive fences specify
the fence usage while adding fences.
Rework all drivers to use this interface instead and deprecate the old one.
v2: some kerneldoc comments suggested by Daniel
v3: fix a missing case in radeon
v4: rebase on nouveau changes, fix lockdep and temporary disable warning
v5: more documentation updates
v6: separate internal dma_resv changes from this patch, avoids to
disable warning temporary, rebase on upstream changes
v7: fix missed case in lima driver, minimize changes to i915_gem_busy_ioctl
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220407085946.744568-3-christian.koenig@amd.com
atomic_flush will be called for each CRTC even if they aren't enabled.
The whole code we have there will thus run without a properly affected
channel, which can then result in all sorts of weird behaviour.
Fortunately, the DRM_PLANE_COMMIT_ACTIVE_ONLY flag will skip the CRTC
atomic_begin and atomic_flush, and the planes atomic_update, if they
aren't enabled.
Our plane atomic_update is a nop, and atomic_begin will copy the current
HVS channel to the vc4_crtc structure for the interrupt handler to
consume, but the handler won't run if the CRTC is disabled. So in the
end, it will only skip our CRTC atomic_flush, which is what we want.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20220331143744.777652-7-maxime@cerno.tech
The vc4_hvs_update_dlist function mostly deals with setting up the
vblank events and setting up the dlist entry pointer to our current
active one.
We'll want to do the former separately from the vblank handling in later
patches, so let's move it to a function of its own.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20220331143744.777652-6-maxime@cerno.tech
In order to get the field currently being output, the driver has been
using the display FIFO frame count in the HVS, reading a 6-bit field at
the offset 12 in the DISPSTATx register.
While that field is indeed at that location for the FIFO 1 and 2, the
one for the FIFO0 is actually in the DISPSTAT1 register, at the offset
18.
Fixes: e538092cb1 ("drm/vc4: Enable precise vblank timestamping for interlaced modes.")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20220331143744.777652-3-maxime@cerno.tech
During a commit, the core clock, which feeds the HVS, needs to run at
a minimum of 500MHz.
While doing that commit, we can also change the mode to one that
requires a higher core clock, so we take the core clock rate associated
to that new state into account for that boost.
However, the old state also needs to be taken into account if it
requires a core clock higher that the new one and our 500MHz limit,
since it's still live in hardware at the beginning of our commit.
Fixes: 16e101051f ("drm/vc4: Increase the core clock based on HVS load")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20220331143744.777652-2-maxime@cerno.tech
