When user specifies a reduced WGP(CU) config via disalbe_cu module
parameter, this does not disable the clocks which uses additional
power. This interface send active WGP number to SMU and SMU will
cooperate with RLC to power off relative WGPs.
v2: Add request active WGPs in Vangogh smu post init.
Signed-off-by: Jinzhou.Su <Jinzhou.Su@amd.com>
Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When using old WORKLOAD_PPLIB setting in smu10.h, there is problem that
it can't be able to switch to mak gpu clk during compute workload.
It needs to update WORKLOAD_PPLIB setting to fix this issue.
Signed-off-by: Changfeng <Changfeng.Zhu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
They are used by some source files which include pp_thermal.h, but not all.
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../pm/inc/pp_thermal.h:28:41: warning: ‘SMU7ThermalWithDelayPolicy’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/amd/amdgpu/../pm/inc/pp_thermal.h:28:41: warning: ‘SMU7ThermalWithDelayPolicy’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/amd/amdgpu/../pm/inc/pp_thermal.h:34:41: warning: ‘SMU7ThermalPolicy’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/amd/amdgpu/../pm/inc/pp_thermal.h:34:41: warning: ‘SMU7ThermalPolicy’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/amd/amdgpu/../pm/inc/pp_thermal.h:34:41: warning: ‘SMU7ThermalPolicy’ defined but not used [-Wunused-const-variable=]
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Evan Quan <evan.quan@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's used in some, but not all source files which include 'smu_v11_0.h'.
Fixes the following W=1 kernel build warning(s):
In file included from drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/smu_v11_0.c:36:
drivers/gpu/drm/amd/amdgpu/../pm/inc/smu_v11_0.h:61:43: warning: ‘smu11_thermal_policy’ defined but not used [-Wunused-const-variable=]
61 | static const struct smu_temperature_range smu11_thermal_policy[] =
| ^~~~~~~~~~~~~~~~~~~~
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The struct name smu_state_memroy_block contains a spelling mistake, rename
it to smu_state_memory_block
Fixes: 8554e67d6e ("drm/amd/powerplay: implement power_dpm_state sys interface for SMU11")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add the fine grain tuning function for vangogh.
This function uses the pp_od_clk_voltage sysfs file to configure the min
and max value of gfx clock frequency or restore the default value.
Command guide:
echo "s level value" > pp_od_clk_voltage
"s" - set the sclk frequency
"level" - 0 or 1, "0" represents the min value, "1" represents
the max value
"value" - the target value of sclk frequency, it should be
limited in the safe range
echo "r" > pp_od_clk_voltage
"r" - reset the sclk frequency, restore the default value
instantly
echo "c" > pp_od_clk_voltage
"c" - commit the min and max value of sclk frequency to the system
only after the commit command, the setting target values by "s" command
will take effect.
Example:
1)check the default sclk frequency
$ cat pp_od_clk_voltage
OD_SCLK:
0: 200Mhz
1: 1400Mhz
OD_RANGE:
SCLK: 200MHz 1400MHz
2)use "s" -- set command to configure the min or max sclk frequency
$ echo "s 0 600" > pp_od_clk_voltage
$ echo "s 1 1000" > pp_od_clk_voltage
$ echo "c" > pp_od_clk_voltage
$ cat pp_od_clk_voltage
OD_SCLK:
0: 600Mhz
1: 1000Mhz
OD_RANGE:
SCLK: 200MHz 1400MHz
3)use "r" -- reset command to restore the min and max sclk frequency
$ echo "r" > pp_od_clk_voltage
$ cat pp_od_clk_voltage
OD_SCLK:
0: 200Mhz
1: 1400Mhz
OD_RANGE:
SCLK: 200MHz 1400MHz
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a regular need in the kernel to provide a way to declare having
a dynamically sized set of trailing elements in a structure. Kernel code
should always use “flexible array members”[1] for these cases. The older
style of one-element or zero-length arrays should no longer be used[2].
Refactor the code according to the use of a flexible-array member in
struct phm_samu_clock_voltage_dependency_table, instead of a one-element array,
and use the struct_size() helper to calculate the size for the allocation.
Also, save some heap space as the original code is multiplying
table->numEntries by sizeof(struct phm_samu_clock_voltage_dependency_table)
when it should have been multiplied it by
sizeof(struct phm_samu_clock_voltage_dependency_record) instead.
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays
Build-tested-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/5f7c5d3a.ryM4GmZr3e0JeZy+%25lkp@intel.com/
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
