Convert the stats tests from spinning on the getsockopt to just check
getsockopt once when the Rx thread has received all the packets. The
actual completion of receiving the last packet forms a natural point
in time when the receiver is ready to call the getsockopt to check the
stats. In the previous version , we just span on the getsockopt until
we received the right answer. This could be forever or just getting
the "correct" answer by shear luck.
The pacing_on variable can now be dropped since all test can now
handle pacing properly.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20220510115604.8717-10-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduce validation functions that can be optionally called by the Rx
and Tx threads. These are then used to replace the Rx and Tx stats
dispatchers. This so that we in the next commit can make the stats
tests proper normal tests and not be some special case, as today.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20220510115604.8717-8-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Fix the reporting of failed tests as it was broken in several
ways. First, a failed test was reported as both failed and passed
messing up the count. Second, tests were not aborted after a failure
and could generate more "failures" messing up the count even
more. Third, the failure reporting from the application to the shell
script was wrong. It always reported pass. And finally, the handling
of the failures in the launch script was not correct.
Correct all this by propagating the failure up through the function
calls to a calling function that can abort the test. A receiver or
sender thread will mark the new variable in the test spec called fail,
if a test has failed. This is then picked up by the main thread when
everyone else has exited and this is then marked and propagated up to
the calling script.
Also add a summary function in the calling script so that a user
does not have to go through the sub tests to see if something has
failed.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20220510115604.8717-5-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Do not try to send packets of zero length since they are dropped by
veth after commit 726e2c5929 ("veth: Ensure eth header is in skb's
linear part"). Replace these two packets with packets of length 60 so
that they are not dropped.
Also clean up the confusing naming. MIN_PKT_SIZE was really
MIN_ETH_PKT_SIZE and PKT_SIZE was both MIN_ETH_SIZE and the default
packet size called just PKT_SIZE. Make it consistent by using the
right define in the right place.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20220510115604.8717-3-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
After commit 710ad98c36 ("veth: Do not record rx queue hint in veth_xmit"),
veth no longer receives traffic on the same queue as it was sent on. This
breaks the bpf_res test for the AF_XDP selftests as the socket tied to
queue 1 will not receive traffic anymore.
Modify the test so that two sockets are tied to queue id 0 using a shared
umem instead. When killing the first socket enter the second socket into
the xskmap so that traffic will flow to it. This will still test that the
resources are not cleaned up until after the second socket dies, without
having to rely on veth supporting rx_queue hints.
Reported-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220125082945.26179-1-magnus.karlsson@gmail.com
Add a test where a single packet is sent and received. This might
sound like a silly test, but since many of the interfaces in xsk are
batched, it is important to be able to validate that we did not break
something as fundamental as just receiving single packets, instead of
batches of packets at high speed.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210922075613.12186-12-magnus.karlsson@gmail.com
Introduce pacing of traffic so that the Tx thread can never send more
packets than the receiver has processed plus the number of packets it
can have in its umem. So at any point in time, the number of in flight
packets (not processed by the Rx thread) are less than or equal to the
number of packets that can be held in the Rx thread's umem.
The batch size is also increased to improve running time.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210922075613.12186-11-magnus.karlsson@gmail.com
Add tests for invalid xsk descriptors in the Tx ring. A number of
handcrafted nasty invalid descriptors are created and submitted to the
tx ring to check that they are validated correctly. Corner case valid
ones are also sent. The tests are run for both aligned and unaligned
mode.
pkt_stream_set() is introduced to be able to create a hand-crafted
packet stream where every single packet is specified in detail.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-20-magnus.karlsson@gmail.com
Add a test for unaligned mode in which packet buffers can be placed
anywhere within the umem. Some packets are made to straddle page
boundaries in order to check for correctness. On the Tx side, buffers
are now allocated according to the addresses found in the packet
stream. Thus, the placement of buffers can be controlled with the
boolean use_addr_for_fill in the packet stream.
One new pkt_stream interface is introduced: pkt_stream_replace_half()
that replaces every other packet in the default packet stream with the
specified new packet. The constant DEFAULT_OFFSET is also
introduced. It specifies at what offset from the start of a chunk a Tx
packet is placed by the sending thread. This is just to be able to
test that it is possible to send packets at an offset not equal to
zero.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-18-magnus.karlsson@gmail.com
Introduce the concept of a default packet stream that is the set of
packets sent by most tests. Then add the ability to replace it for a
test that would like to send or receive something else through the use
of the function pkt_stream_replace() and then restored with
pkt_stream_restore_default(). These are then used to convert the
STAT_TEST_TX_INVALID to use these new APIs.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-17-magnus.karlsson@gmail.com
Make xdp_flags and bind_flags local instead of global by moving them
into the interface object. These flags decide if the socket should be
created in SKB mode or in DRV mode and therefore they are sticky and
will survive a test_spec_reset. Since every test is first run in SKB
mode then in DRV mode, this change only happens once. With this
change, the configured_mode global variable can also be
erradicated. The first test_spec_init() also becomes superfluous and
can be eliminated.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-13-magnus.karlsson@gmail.com
Replace the second_step global variable with a test specification
variable called total_steps that a test can be set to indicate how
many times the packet stream should be sent without reinitializing any
sockets. This eliminates test specific code in the test runner around
the bidirectional test.
The total_steps variable is 1 by default as most tests only need a
single round of packets.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-11-magnus.karlsson@gmail.com
Introduce a test specification to be able to concisely describe a
test. Currently, a test is implemented by sprinkling test specific if
statements here and there, which is not scalable or easy to
understand. The end goal with this patch set is to come to the point
in which a test is completely specified by a test specification that
can easily be constructed in a single function so that new tests can
be added without too much trouble. This test specification will be run
by a test runner that has no idea about tests. It just executes the
what test specification states.
This patch introduces the test specification and, as a start, puts the
two interface objects in there, one containing the packet stream to be
sent and the other one the packet stream that is supposed to be
received for a test to pass. The global variables containing these can
then be eliminated. The following patches will convert each existing
test into a test specification and add the needed fields into it and
the functionality in the test runner that act on the test
specification. At the end, the test runner should contain no test
specific code and each test should be described in a single simple
function.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-4-magnus.karlsson@gmail.com
Simplify the xsk_info and umem_info allocation by allocating them
upfront in an array, instead of allocating an array of pointers to
future creations of these. Allocating them upfront also has the
advantage that configuration information can be stored in these
structures instead of relying on global variables. With the previous
structure, xsk_info and umem_info were created too late to be able to
store most configuration information. This will be used to eliminate
most global variables in later patches in this series.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-2-magnus.karlsson@gmail.com
Generate packets from a specification instead of something hard
coded. The idea is that a test generates one or more packet
specifications and provides it/them to both Tx and Rx. The Tx thread
will generate from this specification and Rx will validate that it
receives what is in the specification. The specification can be the
same on both ends, meaning that everything that was sent should be
received, or different which means that Rx will only receive part of
the sent packets.
Currently, the packet specification is the same for both Rx and Tx and
the same for each test. This will change in later work as features
and tests are added.
The data path functions are also renamed to better reflect what
actions they are performing after introducing this feature.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210825093722.10219-15-magnus.karlsson@gmail.com
Decrease sending speed to avoid potentially overflowing some buffers
in the skb case that leads to dropped packets we cannot control (and
thus the tests may generate false negatives). Decrease batch size and
introduce a usleep in the transmit thread to not overflow the
receiver.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210825093722.10219-12-magnus.karlsson@gmail.com
Simplify packet validation in the xsk selftests by performing it at
once for every packet. The current code performed this per batch and
did this on copied packet data. Make it simpler and faster by
validating it at once and on the umem packet data thus skipping the
copy and the memory allocation for the temprary buffer.
The optional packet dump feature is also simplified in the same
manner. Memory allocation and copying is removed and the dump is
performed directly on the umem data.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210825093722.10219-10-magnus.karlsson@gmail.com
Introduce a test that is supposed to verify the persistence of BPF
resources based on underlying bpf_link usage.
Test will:
1) create and bind two sockets on queue ids 0 and 1
2) run a traffic on queue ids 0
3) remove xsk sockets from queue 0 on both veth interfaces
4) run a traffic on queues ids 1
Running traffic successfully on qids 1 means that BPF resources were
not removed on step 3).
In order to make it work, change the command that creates veth pair to
have the 4 queue pairs by default.
Introduce the arrays of xsks and umems to ifobject struct but keep a
pointers to single entities, so rest of the logic around Rx/Tx can be
kept as-is.
For umem handling, double the size of mmapped space and split that
between the two sockets.
Rename also bidi_pass to a variable 'second_step' of a boolean type as
it's now used also for the test that is introduced here and it doesn't
have anything in common with bi-directional testing.
Drop opt_queue command line argument as it wasn't working before anyway.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210329224316.17793-15-maciej.fijalkowski@intel.com
Although thread_common_ops() are called in both Tx and Rx threads,
testapp_validate() will not spawn Tx thread until Rx thread signals that
it has finished its initialization via condition variable.
Therefore, locking in thread_common_ops is not needed and furthermore Tx
thread does not have to spin on atomic variable.
Note that this simplification wouldn't be possible if there would still
be a common worker thread.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210329224316.17793-13-maciej.fijalkowski@intel.com
Currently, there is a testapp_sockets() that acts like a wrapper around
testapp_validate() and it is called for bidi and teardown test types.
Other test types call testapp_validate() directly.
Split testapp_sockets() onto two separate functions so a bunch of bidi
specific logic can be moved there and out of testapp_validate() itself.
Introduce function pointer to ifobject struct which will be used for
assigning the Rx/Tx function that is assigned to worker thread. Let's
also have a global ifobject Rx/Tx pointers so it's easier to swap the
vectors on a second run of a bi-directional test. Thread creation now is
easey to follow.
switching_notify variable is useless, info about vector switch can be
printed based on bidi_pass state.
Last but not least, init/destroy synchronization variables only once,
not per each test.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210329224316.17793-12-maciej.fijalkowski@intel.com
Tx thread needs to be started after the Rx side is fully initialized so
that packets are not xmitted until xsk Rx socket is ready to be used.
It can be observed that atomic variable spinning_tx is not checked from
Rx side in any way, so thread_common_ops can be modified to only address
the spinning_rx. This means that spinning_tx can be removed altogheter.
signal_tx_condition is never utilized, so simply remove it.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210329224316.17793-11-maciej.fijalkowski@intel.com
Currently, there is a dedicated thread for following remote ns operations:
- grabbing the ifindex of the interface moved to remote netns
- removing xdp prog from that interface
With bpf_link usage in place, this can be simply omitted, so remove
mentioned thread, as BPF resources will be managed by bpf_link itself,
so there's no further need for creating the thread that will switch to
remote netns and do the cleanup.
Keep most of the logic for switching the ns, though, but make
switch_namespace() return the fd so that it will be possible to close it
at the process termination time. Get rid of logic around making sure
that it's possible to switch ns in validate_interfaces().
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210329224316.17793-9-maciej.fijalkowski@intel.com
