Once we've set-up the HDA stream and its format, we currently don't
support additional format changes. We already have a protection in the
.prepare case, but this needs to be added in the hw_params too.
In mixing use cases where two DPCM FEs are connected to the same BE,
if can happen that there are multiple calls to the BE hw_params when
the two FEs are configured simultaneously.
This could alternatively be fixed at the DPCM level but that's a more
intrusive change requiring infrastructure changes: this would need to
be paired with the definition of fixed hw_params at the mixer level.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220421203201.1550328-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add 3 new topology IPC ops for widget_setup, widget_free and dai_config
in order to make the pipeline management code IPC agnostic and implement
the ops for IPC3.
Use the newly introduced tplg dai_config op to configure the DAI during
BE DAI hw_params and hw_free.
Also, in preparation for IPC4, modify BE hw_params callback to skip
setting up the DAI widget. All widgets will be set up during FW
hw_params and the DAI_CONFIG IPC should be sent only if the widget
use_count is > 0. With setting up/freeing removed from the BE hw_params,
remove the configured flag as it is no longer needed.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220317175044.1752400-3-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new client driver for probes support and move
all the probes-related code from the core to the
client driver.
The probes client driver registers a component driver
with one CPU DAI driver for extraction and creates a
new sound card with one DUMMY DAI link with a dummy codec
that will be used for extracting audio data from specific
points in the audio pipeline.
The probes debugfs ops are based on the initial
implementation by Cezary Rojewski and have been moved
out of the SOF core into the client driver making it
easier to maintain. This change will make it easier
for the probes functionality to be added for all platforms
without having the need to modify the existing(15+) machine
drivers.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220210150525.30756-10-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing code maximizes confusion by using 'stream' and 'hstream'
variables of different types, e.g:
struct hdac_stream *stream;
struct hdac_ext_stream *stream;
struct hdac_stream *hstream;
struct hdac_ext_stream *hstream;
This confusion is partly inherited from legacy code but SOF
contributors added their own creative spin, e.g.
struct hdac_ext_stream *link_dev;
struct hdac_ext_stream *dsp_stream;
struct hdac_ext_stream hda_stream;
and my personal favorite:
stream = &hda_stream->hda_stream;
This patch suggests a consistent naming across all Intel code related
to HDAudio stream management. The convention is - by hierarchical
order:
struct sof_intel_hda_stream *hda_stream;
struct hdac_ext_stream *hext_stream;
struct hdac_stream *hstream;
No functionality change - just renaming of variables/members.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220209063104.9971-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some DAI components, such as HDaudio, need to be stopped in two steps
a) stop the DAI component
b) stop the DAI DMA
This patch enables this two-step stop by expanding the DAI_CONFIG
IPC flags and split them into 2 parts.
The 4 LSB bits indicate when the DAI_CONFIG IPC is sent, ex: hw_params,
hw_free or pause. The 4 MSB bits are used as the quirk flags to be used
along with the command flags. The quirk flag called
SOF_DAI_CONFIG_FLAGS_2_STEP_STOP shall be set along with the HW_PARAMS
command flag, i.e. before the pipeline is started so that the stop/pause
trigger op in the FW can take the appropriate action to either
perform/skip the DMA stop. If set, the DMA stop will be executed when
the DAI_CONFIG IPC is sent during hw_free. In the case of pause, DMA
pause will be handled when the DAI_CONFIG IPC is sent with the PAUSE
command flag.
Along with this, modify the signature for the hda_ctrl_dai_widget_setup/
hda_ctrl_dai_widget_free() functions to take additional flags as an
argument and modify all users to pass the appropriate quirk flags. Only
the HDA DAI's need to pass the SOF_DAI_CONFIG_FLAGS_2_STEP_STOP quirk
flag during hw_params to indicate that it supports two-step stop and
pause.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211125101520.291581-10-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: Updates for v5.16
This is an unusually large set of updates, mostly a large crop of
unusually big drivers coupled with extensive overhauls of existing code.
There's a SH change here for the DAI format terminology, the change is
straightforward and the SH maintainers don't seem very active.
- A new version of the audio graph card which supports a wider range of
systems.
- Move of the Cirrus DSP framework into drivers/firmware to allow for
future use by non-audio DSPs.
- Several conversions to YAML DT bindings.
- Continuing cleanups to the SOF and Intel code.
- A very big overhaul of the cs42l42 driver, correcting many problems.
- Support for AMD Vangogh and Yelow Cap, Cirrus CS35L41, Maxim
MAX98520 and MAX98360A, Mediatek MT8195, Nuvoton NAU8821, nVidia
Tegra210, NXP i.MX8ULP, Qualcomm AudioReach, Realtek ALC5682I-VS,
RT5682S, and RT9120 and Rockchip RV1126 and RK3568
In order to keep the widget use_count balanced, make sure the DAI
widgets are allocated once in hw_params and released in hw_free. A
'setup' status flag is used to deal with cases where the .hw_params
callback is invoked multiple times, and likewise with cases where
hw_free is invoked without hw_params being called first (which can
happen if the FE hw_params fails).
In addition, this patch frees the widgets in the suspend transition,
and reallocates them in the .prepare callback. The 'setup' flag helps
in this case differentiate between resume (setup needed) and
xruns (setup not needed).
This balanced operation was not needed previously but will be required
when SOF dynamic pipelines are enabled.
Co-developed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20211004171430.103674-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move all the audio-specific code in the core,
audio-specific logic in the top-level PM callbacks
and the core header files into a separate file
(sof-audio.*) in preparation for adding an
audio client device.
In the process of moving all structure definitions
for widget, routes, pcm's etc, the snd_sof_dev
member in all these structs is replaced with
the snd_soc_component member. Also, use the component
device instead of the snd_sof_dev device wherever
possible in the PCM component driver,
control IO functions and the topology parser as the
component device will be moved over to the client
device later on.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191204211556.12671-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For this bug, there are two capture pcm streams active, with one
stream and its related stream tag released before suspend. Later
when system suspend is done, the stream tag for the remaining
active stream is released by SOF driver. After system resume, hda
codec driver restores the stream tag for the active pcm stream,
but SOF goes to assign a new one, which now doesn't match with the
stream tag used by codec driver, and this causes DMA to fail
receiving data, leading to unrecoverable XRUN condition in FW.
For stream tag is stored in both hda codec and SOF driver, it
shouldn't be released only in SOF driver. This patch just keeps the
stream information in dma data and checks whether there is a stored
DMA data for stream resuming from S3 and restores it. And it also
removes DMA data when the stream is released.
Tested on Whiskey Lake platform.
GitHub issue: https://github.com/thesofproject/sof/issues/1594
Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190722141402.7194-19-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Due to the HW programming sequence requirement that the host
and link DMA channels need to be coupled/decoupled during pcm
hw_params, the host DMA channel corresponding to the link
DMA channel in use for hostless streams needs to be reserved.
This is achieved by adding a host_reserved flag in the
sof_intel_hda_stream structure which is checked when assigning
a host DMA channel.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The recommended HDA HW programming sequence for setting
the DMA format requires that the link DMA and host DMA
channels be coupled before setting the format. This
change means that host DMA or link DMA channels be
reserved even if only one is used.
Statically assigned link DMA channels would mean that
all the corresponding host DMA channels will need to be
reserved, leaving only a few channels available at run-time.
So, the suggestion here is to switch to dynamically assigning
both host DMA channels and link DMA channels are run-time.
The host DMA channel is assigned when the pcm
is opened as before. While choosing the link DMA channel,
if the host DMA channel corresponding to the link DMA channel
is already taken, the proposed method checks to make
sure that the BE is connected to the FE that has been assigned
this host DMA channel. Once the link DMA channel is assigned,
an IPC is sent to the DSP to set the link DMA channel.
The link DMA channel is freed during hw_free() and also in the
SUSPEND trigger callback. It will be re-assigned when hw_params
are set upon resume.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The prepare() ioctl for BE dai link gets called both
when the stream is started and when it is resumed from
suspend. SOF uses this ioctl to set the hw params
again only if the stream has been suspended.
When the stream is started, the hw_params ioctl gets called
before prepare() and hw_params is set for the BE dai link.
So the prepare call does not need to do anything further.
When the stream resumes after system suspend, SOF requires
that the hw_params be set again for the BE dai. In order
to determine which streams should set the hw params
during prepare(), an internal flag called "hw_params_upon_resume"
is introduced in struct sof_intel_hda_stream. The flag is set
for hda streams when the sof device suspends and is
cleared after hw_params is set.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
