Currently the #define IB_SRQ_INIT_MASK is used to distinguish the
rxe_create_srq verb from the rxe_modify_srq verb so that some code can be
shared between these two subroutines.
This commit splits rxe_srq_chk_attr into two subroutines: rxe_srq_chk_init
and rxe_srq_chk_attr which handle the create_srq and modify_srq verbs
separately.
Link: https://lore.kernel.org/r/20220421014042.26985-2-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently the rxe driver uses red-black trees to add indices to the rxe
object pools. Linux xarrays provide a better way to implement the same
functionality for indices. This patch replaces red-black trees by xarrays
for pool objects. Since xarrays already have a spinlock use that in place
of the pool rwlock. Make sure that all changes in the xarray(index) and
kref(ref counnt) occur atomically.
Link: https://lore.kernel.org/r/20220304000808.225811-9-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
A previous patch replaced all irqsave locks in rxe with bh locks. This
ran into problems because rdmacm has a bad habit of calling rdma verbs
APIs while disabling irqs. This is not allowed during spin_unlock_bh()
causing programs that use rdmacm to fail. This patch reverts the changes
to locks that had this problem or got dragged into the same mess. After
this patch blktests/check -q srp now runs correctly.
Link: https://lore.kernel.org/r/20220215194448.44369-1-rpearsonhpe@gmail.com
Fixes: 21adfa7a3c ("RDMA/rxe: Replace irqsave locks with bh locks")
Reported-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Reported-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Tested-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Move rxe_mcast_attach and rxe_mcast_detach from rxe_verbs.c to rxe_mcast.c,
Make non-static and add declarations to rxe_loc.h. Make the subroutines
in rxe_mcast.c referenced by these routines static and remove their
declarations from rxe_loc.h.
Link: https://lore.kernel.org/r/20220127213755.31697-3-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Most of the locks in the rxe driver are _irqsave/restore locks but in fact
there are no interrupt threads that run rxe code or share data with
rxe. There are softirq threads and data sharing so the appropriate lock
type is _bh. This patch replaces all irqsave type locks with bh type
locks.
Link: https://lore.kernel.org/r/20211103050241.61293-2-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Make changes to rdma_user_rxe.h to allow indexing AH objects, passing the
index in UD send WRs to the driver and returning the index to the rxe
provider.
Modify rxe_create_ah() to add an index to AH when created and if called
from a new user provider return it to user space. If called from an old
provider mark the AH as not having a useful index. Modify rxe_destroy_ah
to drop the index before deleting the object.
Link: https://lore.kernel.org/r/20211007204051.10086-4-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Move the struct rxe_av av from struct rxe_send_wqe to struct rxe_send_wr
placing it in wr.ud at the same offset as it was previously. This has the
effect of increasing the size of struct rxe_send_wr while keeping the size
of struct rxe_send_wqe the same. This better reflects the use of this
field which is only used for UD sends. This change has no effect on ABI
compatibility so the modified rxe driver will operate with older versions
of rdma-core.
Link: https://lore.kernel.org/r/20211007204051.10086-2-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
For fast memory regions create duplicate mapping tables so ib_map_mr_sg()
can build a new mapping table which is then swapped into place
synchronously with the execution of an IB_WR_REG_MR work request.
Currently the rxe driver uses the same table for receiving RDMA operations
and for building new tables in preparation for reusing the MR. This
exposes users to potentially incorrect results.
Link: https://lore.kernel.org/r/20210914164206.19768-5-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Earlier patches added memory barriers to protect user space to kernel
space communications. The user space queues were previously shown to have
occasional memory synchonization errors which were removed by adding
smp_load_acquire, smp_store_release barriers. This patch extends that to
the case where queues are used between kernel space threads.
This patch also extends the queue types to include kernel ULP queues which
access the other end of the queues in kernel verbs calls like poll_cq and
post_send/recv.
Link: https://lore.kernel.org/r/20210914164206.19768-2-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In order to prevent user space from modifying the index that belongs to
the kernel for shared queues let the kernel use a local copy of the index
and copy any new values of that index to the shared rxe_queue_bus struct.
This adds more switch statements which decreases the performance of the
queue API. Move the type into the parameter list for these functions so
that the compiler can optimize out the switch statements when the explicit
type is known. Modify all the calls in the driver on performance paths to
pass in the explicit queue type.
Link: https://lore.kernel.org/r/20210527194748.662636-4-rpearsonhpe@gmail.com
Link: https://lore.kernel.org/linux-rdma/20210526165239.GP1002214@@nvidia.com/
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In the original rxe implementation it was intended to use a common object
to represent MRs and MWs but they are different enough to separate these
into two objects.
This allows replacing the mem name with mr for MRs which is more
consistent with the style for the other objects and less likely to be
confusing. This is a long patch that mostly changes mem to mr where it
makes sense and adds a new rxe_mw struct.
Link: https://lore.kernel.org/r/20210325212425.2792-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Acked-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Current code uses many different types when dealing with a port of a RDMA
device: u8, unsigned int and u32. Switch to u32 to clean up the logic.
This allows us to make (at least) the core view consistent and use the
same type. Unfortunately not all places can be converted. Many uverbs
functions expect port to be u8 so keep those places in order not to break
UAPIs. HW/Spec defined values must also not be changed.
With the switch to u32 we now can support devices with more than 255
ports. U32_MAX is reserved to make control logic a bit easier to deal
with. As a device with U32_MAX ports probably isn't going to happen any
time soon this seems like a non issue.
When a device with more than 255 ports is created uverbs will report the
RDMA device as having 255 ports as this is the max currently supported.
The verbs interface is not changed yet because the IBTA spec limits the
port size in too many places to be u8 and all applications that relies in
verbs won't be able to cope with this change. At this stage, we are
extending the interfaces that are using vendor channel solely
Once the limitation is lifted mlx5 in switchdev mode will be able to have
thousands of SFs created by the device. As the only instance of an RDMA
device that reports more than 255 ports will be a representor device and
it exposes itself as a RAW Ethernet only device CM/MAD/IPoIB and other
ULPs aren't effected by this change and their sysfs/interfaces that are
exposes to userspace can remain unchanged.
While here cleanup some alignment issues and remove unneeded sanity
checks (mainly in rdmavt),
Link: https://lore.kernel.org/r/20210301070420.439400-1-leon@kernel.org
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
checkpatch -f found 3 warnings in RDMA/rxe
1. a missing space following switch
2. return followed by else
3. use of strlcpy() instead of strscpy().
This patch fixes each of these. In
...
} elseif (...) {
...
return 0;
} else
...
The middle block can be safely moved since it is completely independent of
the other code.
Link: https://lore.kernel.org/r/20210205230525.49068-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Replace 'void *' parameters with 'struct rxe_pool_entry *' and use a macro
to allow:
rxe_add_index,
rxe_drop_index,
rxe_add_key,
rxe_drop_key and
rxe_add_to_pool
APIs to be type safe against changing the position of pelem in the
objects.
Link: https://lore.kernel.org/r/20201216231550.27224-6-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This moves siw and rxe to be virtual devices in the device tree:
lrwxrwxrwx 1 root root 0 Nov 6 13:55 /sys/class/infiniband/rxe0 -> ../../devices/virtual/infiniband/rxe0/
Previously they were trying to parent themselves to the physical device of
their attached netdev, which doesn't make alot of sense.
My hope is this will solve some weird syzkaller hits related to sysfs as
it could be possible that the parent of a netdev is another netdev, eg
under bonding or some other syzkaller found netdev configuration.
Nesting a ib_device under anything but a physical device is going to cause
inconsistencies in sysfs during destructions.
Link: https://lore.kernel.org/r/0-v1-dcbfc68c4b4a+d6-virtual_dev_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Use the ib_dma_* helpers to skip the DMA translation instead. This
removes the last user if dma_virt_ops and keeps the weird layering
violation inside the RDMA core instead of burderning the DMA mapping
subsystems with it. This also means the software RDMA drivers now don't
have to mess with DMA parameters that are not relevant to them at all, and
that in the future we can use PCI P2P transfers even for software RDMA, as
there is no first fake layer of DMA mapping that the P2P DMA support.
Link: https://lore.kernel.org/r/20201106181941.1878556-8-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Allowing userspace to invoke these commands is probably going to crash
these drivers as they are not tested and not expecting to use them on a
user object.
For example pvrdma touches cq->ring_state which is not initialized for
user QPs.
These commands are effected:
- IB_USER_VERBS_CMD_REQ_NOTIFY_CQ is ibv_cmd_req_notify_cq() in
rdma-core, only hfi1, ipath and rxe calls it.
- IB_USER_VERBS_CMD_POLL_CQ is ibv_cmd_poll_cq() in rdma-core, only
ipath and hfi1 calls it.
- IB_USER_VERBS_CMD_POST_SEND/RECV is ibv_cmd_post_send/recv() in
rdma-core, only ipath and hfi1 call them.
- IB_USER_VERBS_CMD_POST_SRQ_RECV is ibv_cmd_post_srq_recv() in
rdma-core, only ipath and hfi1 calls it.
- IB_USER_VERBS_CMD_PEEK_CQ isn't even implemented anywhere
- IB_USER_VERBS_CMD_CREATE/DESTROY_AH is ibv_cmd_create/destroy_ah() in
rdma-core, only bnxt_re, efa, hfi1, ipath, mlx5, orcrdma, and rxe call
it.
Link: https://lore.kernel.org/r/10-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Each driver should check that the QP attrs create_flags is supported.
Unfortuantely when create_flags was added to the QP attrs the drivers were
not updated. uverbs_ex_cmd_mask was used to block it - even though kernel
drivers use these flags too.
Check that flags is zero in all drivers that don't use it, remove
IB_USER_VERBS_EX_CMD_CREATE_QP from uverbs_ex_cmd_mask. Fix the error code
to be EOPNOTSUPP.
Link: https://lore.kernel.org/r/8-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Each driver should check that the CQ attrs is supported. Unfortuantely
when flags was added to the CQ attrs the drivers were not updated,
uverbs_ex_cmd_mask was used to block it. This was missed when create CQ
was converted to ioctl, so non-zero flags could have been passed into
drivers.
Check that flags is zero in all drivers that don't use it, remove
IB_USER_VERBS_EX_CMD_CREATE_CQ from uverbs_ex_cmd_mask.
Fixes: 41b2a71fc8 ("IB/uverbs: Move ioctl path of create_cq and destroy_cq to a new file")
Link: https://lore.kernel.org/r/7-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
These functions all depend on the driver providing a specific op:
- REREG_MR is rereg_user_mr(). bnxt_re set this without providing the op
- ATTACH/DEATCH_MCAST is attach_mcast()/detach_mcast(). usnic set this
without providing the op
- OPEN_QP doesn't involve the driver but requires a XRCD. qedr provides
xrcd but forgot to set it, usnic doesn't provide XRCD but set it anyhow.
- OPEN/CLOSE_XRCD are the ops alloc_xrcd()/dealloc_xrcd()
- CREATE_SRQ/DESTROY_SRQ are the ops create_srq()/destroy_srq()
- QUERY/MODIFY_SRQ is op query_srq()/modify_srq(). hns sets this but
sometimes supplies a NULL op.
- RESIZE_CQ is op resize_cq(). bnxt_re sets this boes doesn't supply an op
- ALLOC/DEALLOC_MW is alloc_mw()/dealloc_mw(). cxgb4 provided an
(now deleted) implementation but no userspace
All drivers were checked that no drivers provide the op without also
setting uverbs_cmd_mask so this should have no functional change.
Link: https://lore.kernel.org/r/4-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
