mlx5 has an ugly flow where it tries to allocate a new MR and replace the
existing MR in the same memory during rereg. This is very complicated and
buggy. Instead of trying to replace in-place inside the driver, provide
support from uverbs to change the entire HW object assigned to a handle
during rereg_mr.
Since destroying a MR is allowed to fail (ie if a MW is pointing at it)
and can't be detected in advance, the algorithm creates a completely new
uobject to hold the new MR and swaps the IDR entries of the two objects.
The old MR in the temporary IDR entry is destroyed, and if it fails
rereg_mr succeeds and destruction is deferred to FD release. This
complexity is why this cannot live in a driver safely.
Link: https://lore.kernel.org/r/20201130075839.278575-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The conversion to auxiliary bus solves long standing issue with
existing mlx5_ib<->mlx5_core coupling. It required to have both
modules in initramfs if one of them needed for the boot.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Since devx uses the new rdma_for_each_block() to fill the PAS it can also
use ib_umem_find_best_pgsz().
However, the umem constructionin devx is complicated, the umem must still
respect all the HW limits such as page_offset_quantized and the IOVA
alignment.
Since we don't know what the user intends to use the umem for we have to
limit it to PAGE_SIZE.
There are users trying to mix umem's with mkeys so this makes them work
reliably, at least for an identity IOVA, by ensuring the IOVA matches the
selected page size.
Last user of mlx5_ib_get_buf_offset() so it can also be removed.
Fixes: aeae94579c ("IB/mlx5: Add DEVX support for memory registration")
Link: https://lore.kernel.org/r/20201115114311.136250-7-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This fixes a bug where the page_offset was not being considered when
building a CQ. The HW specification says it 'must be zero', so use
a variant of mlx5_umem_find_best_quantized_pgoff() with a 0 pgoff_bitmask
to force this result.
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Link: https://lore.kernel.org/r/20201115114311.136250-6-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
SRQ uses a quantized and scaled page_offset, which is another variation of
ib_umem_find_best_pgsz(). Add mlx5_umem_find_best_quantized_pgoff() to
perform this calculation for each mailbox. A macro shows how the
calculation is directly connected to the mailbox format.
This new routine replaces the limited mlx5_ib_cont_pages() and
mlx5_ib_get_buf_offset() pairing which would reject valid configurations
rather than adjust the page_size to make it work.
In turn this is much more aggressive about choosing large page sizes for
these objects and when THP is enabled it will now often find a single page
solution.
Link: https://lore.kernel.org/r/20201115114311.136250-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Mixing these together is just a mess, make a dedicated version,
mlx5_ib_update_mr_pas(), which directly loads the whole MTT for a non-ODP
MR.
The split out version can trivially use a simple loop with
rdma_for_each_block() which allows using the core code to compute the MR
pages and avoids seeking in the SGL list after each chunk as the
__mlx5_ib_populate_pas() call required.
Significantly speeds loading large MTTs.
Link: https://lore.kernel.org/r/20201026132314.1336717-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The memory allocation is quite complicated, and makes this function hard
to understand. Refactor things so that a function call sets up the WR, SG,
DMA mapping and buffer, further splitting that into buffer and DMA/wr.
This also slightly changes the buffer allocation logic to try an order 0
page allocation (with OOM warnings on) before going to the emergency page.
Link: https://lore.kernel.org/r/20201026132314.1336717-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
For the user MR path, instead of calling this after getting the umem, call
it as part of creating the struct mlx5_ib_mr and distill its output to a
single page_shift stored inside the mr.
This avoids passing around the tuple of its output. Based on the umem and
page_shift, the output arguments can be computed using:
count == ib_umem_num_pages(mr->umem)
shift == mr->page_shift
ncont == ib_umem_num_dma_blocks(mr->umem, 1 << mr->page_shift)
order == order_base_2(ncont)
And since mr->page_shift == umem_odp->page_shift then ncont ==
ib_umem_num_dma_blocks() == ib_umem_odp_num_pages() for ODP umems.
Link: https://lore.kernel.org/r/20201026131936.1335664-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The is only ever set to non-zero if the MR is from the cache, and if it is
cached then the order is in cached_ent->order.
Make it clearer that use_umr_mtt_update() only returns true for cached MRs
and remove the redundant data.
Link: https://lore.kernel.org/r/20201026131936.1335664-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Once a mkey is created it can be modified using UMR. This is desirable for
performance reasons. However, different hardware has restrictions on what
modifications are possible using UMR. Make sense of these checks:
- mlx5_ib_can_reconfig_with_umr() returns true if the access flags can be
altered. Most cases create MRs using 0 access flags (now made clear by
consistent use of set_mkc_access_pd_addr_fields()), but the old logic
here was tormented. Make it clear that this is checking if the current
access_flags can be modified using UMR to different access_flags. It is
always OK to use UMR to change flags that all HW supports.
- mlx5_ib_can_load_pas_with_umr() returns true if UMR can be used to
enable and update the PAS/XLT. Enabling requires updating the entity
size, so UMR ends up completely disabled on this old hardware. Make it
clear why it is disabled. FRWR, ODP and cache always requires
mlx5_ib_can_load_pas_with_umr().
- mlx5_ib_pas_fits_in_mr() is used to tell if an existing MR can be
resized to hold a new PAS list. This only works for cached MR's because
we don't store the PAS list size in other cases.
To be very clear, arrange things so any pre-created MR's in the cache
check the newly requested access_flags before allowing the MR to leave the
cache. If UMR cannot set the required access_flags the cache fails to
create the MR.
This in turn means relaxed ordering and atomic are now correctly blocked
early for implicit ODP on older HW.
Link: https://lore.kernel.org/r/20200914112653.345244-6-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Like any other verbs objects, CQ shouldn't fail during destroy, but
mlx5_ib didn't follow this contract with mixed IB verbs objects with
DEVX. Such mix causes to the situation where FW and kernel are fully
interdependent on the reference counting of each side.
Kernel verbs and drivers that don't have DEVX flows shouldn't fail.
Fixes: e39afe3d6d ("RDMA: Convert CQ allocations to be under core responsibility")
Link: https://lore.kernel.org/r/20200907120921.476363-7-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In similar way to other IB objects, restore the ability to return error on
SRQ destroy. Strictly speaking, this change is not necessary, and provided
here to ensure a symmetrical interface like other destroy functions.
Fixes: 68e326dea1 ("RDMA: Handle SRQ allocations by IB/core")
Link: https://lore.kernel.org/r/20200907120921.476363-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Like any other IB verbs objects, AH are refcounted by ib_core. The release
of those objects are controlled by ib_core with promise that AH destroy
can't fail.
Being SW object for now, this change makes dealloc_ah() to behave like any
other destroy IB flows.
Fixes: d345691471 ("RDMA: Handle AH allocations by IB/core")
Link: https://lore.kernel.org/r/20200907120921.476363-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Meir Lichtinger says:
====================
ConnectX-7 supports setting relaxed ordering read/write mkey attribute by
UMR, indicated by new HCA capabilities, so extend mlx5_ib driver to
configure UMR control segment
====================
Based on the mlx5-next branch at
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
due to dependencies.
* branch 'mlx5_uar':
RDMA/mlx5: Set mkey relaxed ordering by UMR with ConnectX-7
RDMA/mlx5: Use MLX5_SET macro instead of local structure
RDMA/mlx5: ConnectX-7 new capabilities to set relaxed ordering by UMR
Up to ConnectX-7 UMR is not used when user passes relaxed ordering access
flag. ConnectX-7 supports setting relaxed ordering read/write mkey
attribute by UMR, indicated by new HCA capabilities.
With ConnectX-7 driver uses UMR when user set relaxed ordering access
flag, in contrast to previous silicon models. Specifically it includes
setting relvant flags of mkey context mask in UMR control segment, and
relaxed ordering write and read flags in UMR mkey context segment.
Link: https://lore.kernel.org/r/20200716105248.1423452-4-leon@kernel.org
Signed-off-by: Meir Lichtinger <meirl@mellanox.com>
Reviewed-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There are number of counters types supported in mlx5_ib: HW counters,
congestion counters, Q-counters and flow counters. Almost all supporting
code was placed in main.c that made almost impossible to maintain the code
anymore. Let's create separate code namespace for the counters to easy
future generalization effort.
Link: https://lore.kernel.org/r/20200702081809.423482-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The mlx5 VF driver doesn't set QP tx port affinity because it doesn't know
if the lag is active or not, since the "lag_active" works only for PF
interfaces. In this case for VF interfaces only one lag is used which
brings performance issue.
Add a lag_tx_port_affinity CAP bit; When it is enabled and
"num_lag_ports > 1", then driver always set QP tx affinity, regardless
of lag state.
Link: https://lore.kernel.org/r/20200527055014.355093-1-leon@kernel.org
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
