Split out flags from ib_device::device_cap_flags that are only used
internally to the kernel into kernel_cap_flags that is not part of the
uapi. This limits the device_cap_flags to being the same bitmap that will
be copied to userspace.
This cleanly splits out the uverbs flags from the kernel flags to avoid
confusion in the flags bitmap.
Add some short comments describing which each of the kernel flags is
connected to. Remove unused kernel flags.
Link: https://lore.kernel.org/r/0-v2-22c19e565eef+139a-kern_caps_jgg@nvidia.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Preset both receive and send CQ pointers prior to call to the drivers and
overwrite it later again till the mlx4 is going to be changed do not
overwrite ibqp properties.
This change is needed for mlx5, because in case of QP creation failure, it
will go to the path of QP destroy which relies on proper CQ pointers.
BUG: KASAN: use-after-free in create_qp.cold+0x164/0x16e [mlx5_ib]
Write of size 8 at addr ffff8880064c55c0 by task a.out/246
CPU: 0 PID: 246 Comm: a.out Not tainted 5.15.0+ #291
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
dump_stack_lvl+0x45/0x59
print_address_description.constprop.0+0x1f/0x140
kasan_report.cold+0x83/0xdf
create_qp.cold+0x164/0x16e [mlx5_ib]
mlx5_ib_create_qp+0x358/0x28a0 [mlx5_ib]
create_qp.part.0+0x45b/0x6a0 [ib_core]
ib_create_qp_user+0x97/0x150 [ib_core]
ib_uverbs_handler_UVERBS_METHOD_QP_CREATE+0x92c/0x1250 [ib_uverbs]
ib_uverbs_cmd_verbs+0x1c38/0x3150 [ib_uverbs]
ib_uverbs_ioctl+0x169/0x260 [ib_uverbs]
__x64_sys_ioctl+0x866/0x14d0
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Allocated by task 246:
kasan_save_stack+0x1b/0x40
__kasan_kmalloc+0xa4/0xd0
create_qp.part.0+0x92/0x6a0 [ib_core]
ib_create_qp_user+0x97/0x150 [ib_core]
ib_uverbs_handler_UVERBS_METHOD_QP_CREATE+0x92c/0x1250 [ib_uverbs]
ib_uverbs_cmd_verbs+0x1c38/0x3150 [ib_uverbs]
ib_uverbs_ioctl+0x169/0x260 [ib_uverbs]
__x64_sys_ioctl+0x866/0x14d0
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Freed by task 246:
kasan_save_stack+0x1b/0x40
kasan_set_track+0x1c/0x30
kasan_set_free_info+0x20/0x30
__kasan_slab_free+0x10c/0x150
slab_free_freelist_hook+0xb4/0x1b0
kfree+0xe7/0x2a0
create_qp.part.0+0x52b/0x6a0 [ib_core]
ib_create_qp_user+0x97/0x150 [ib_core]
ib_uverbs_handler_UVERBS_METHOD_QP_CREATE+0x92c/0x1250 [ib_uverbs]
ib_uverbs_cmd_verbs+0x1c38/0x3150 [ib_uverbs]
ib_uverbs_ioctl+0x169/0x260 [ib_uverbs]
__x64_sys_ioctl+0x866/0x14d0
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: 514aee660d ("RDMA: Globally allocate and release QP memory")
Link: https://lore.kernel.org/r/2dbb2e2cbb1efb188a500e5634be1d71956424ce.1636631035.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
alloc_and_bind() creates a new rdma_hw_stats structure but misses
initializing the mutex lock.
This causes debug kernel failures:
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
WARNING: CPU: 4 PID: 64464 at kernel/locking/mutex.c:575 __mutex_lock+0x9c3/0x12b0
Call Trace:
fill_res_counter_entry+0x6ee/0x1020 [ib_core]
res_get_common_dumpit+0x907/0x10a0 [ib_core]
nldev_stat_get_dumpit+0x20a/0x290 [ib_core]
netlink_dump+0x451/0x1040
__netlink_dump_start+0x583/0x830
rdma_nl_rcv_msg+0x3f3/0x7c0 [ib_core]
rdma_nl_rcv+0x264/0x410 [ib_core]
netlink_unicast+0x433/0x700
netlink_sendmsg+0x707/0xbf0
sock_sendmsg+0xb0/0xe0
__sys_sendto+0x193/0x240
__x64_sys_sendto+0xdd/0x1b0
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Instead of requiring all users to open code initialization of the lock put
it in the general rdma_alloc_hw_stats_struct() function and remove
duplicates.
Fixes: c4ffee7c9b ("RDMA/netlink: Implement counter dumpit calback")
Link: https://lore.kernel.org/r/4a22986c4685058d2c735d91703ee7d865815bb9.1635237668.git.leonro@nvidia.com
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Current code uses many different types when dealing with a port of a RDMA
device: u8, unsigned int and u32. Switch to u32 to clean up the logic.
This allows us to make (at least) the core view consistent and use the
same type. Unfortunately not all places can be converted. Many uverbs
functions expect port to be u8 so keep those places in order not to break
UAPIs. HW/Spec defined values must also not be changed.
With the switch to u32 we now can support devices with more than 255
ports. U32_MAX is reserved to make control logic a bit easier to deal
with. As a device with U32_MAX ports probably isn't going to happen any
time soon this seems like a non issue.
When a device with more than 255 ports is created uverbs will report the
RDMA device as having 255 ports as this is the max currently supported.
The verbs interface is not changed yet because the IBTA spec limits the
port size in too many places to be u8 and all applications that relies in
verbs won't be able to cope with this change. At this stage, we are
extending the interfaces that are using vendor channel solely
Once the limitation is lifted mlx5 in switchdev mode will be able to have
thousands of SFs created by the device. As the only instance of an RDMA
device that reports more than 255 ports will be a representor device and
it exposes itself as a RAW Ethernet only device CM/MAD/IPoIB and other
ULPs aren't effected by this change and their sysfs/interfaces that are
exposes to userspace can remain unchanged.
While here cleanup some alignment issues and remove unneeded sanity
checks (mainly in rdmavt),
Link: https://lore.kernel.org/r/20210301070420.439400-1-leon@kernel.org
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Commit 66f57b871e ("RDMA/restrack: Support all QP types") extends
ib_create_qp() to a named ib_create_named_qp(), which takes the caller's
name as argument, but it did not add the new argument description to the
function's kerneldoc.
make htmldocs warns:
./drivers/infiniband/core/verbs.c:1206: warning: Function parameter or member 'caller' not described in 'ib_create_named_qp'
Add a description for this new argument based on the description of the
same argument in other related functions.
Fixes: 66f57b871e ("RDMA/restrack: Support all QP types")
Link: https://lore.kernel.org/r/20201207173255.13355-1-lukas.bulwahn@gmail.com
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The latest changes in restrack name handling allowed to simplify the QP
creation code to support all types of QPs.
For example XRC QP are presented with rdmatool.
$ ibv_xsrq_pingpong &
$ rdma res show qp
link ibp0s9/1 lqpn 0 type SMI state RTS sq-psn 0 comm [ib_core]
link ibp0s9/1 lqpn 1 type GSI state RTS sq-psn 0 comm [ib_core]
link ibp0s9/1 lqpn 7 type UD state RTS sq-psn 0 comm [mlx5_ib]
link ibp0s9/1 lqpn 42 type XRC_TGT state INIT sq-psn 0 path-mig-state MIGRATED comm [ib_uverbs]
link ibp0s9/1 lqpn 43 type XRC_INI state INIT sq-psn 0 path-mig-state MIGRATED pdn 197 pid 419 comm ibv_xsrq_pingpong
Link: https://lore.kernel.org/r/20201117070148.1974114-4-leon@kernel.org
Reviewed-by: Mark Zhang <markz@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Separate IB_GID_TYPE_IB and IB_GID_TYPE_ROCE to two different values, so
enum ib_gid_type will match the gid types of the new query GID table API
which will be introduced in the following patches.
This change in enum ib_gid_type requires to change also enum
rdma_network_type by separating RDMA_NETWORK_IB and RDMA_NETWORK_ROCE_V1
values.
Link: https://lore.kernel.org/r/20200923165015.2491894-3-leon@kernel.org
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Have a single rdma_restrack_add() that adds an entry, there is no reason
to split the user/kernel here, the rdma_restrack_set_task() is responsible
for this difference.
This patch prepares the code to the future requirement of making restrack
is mandatory for managing ib objects.
Link: https://lore.kernel.org/r/20200922091106.2152715-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Refactor the restrack code to make sure the kref inside the restrack entry
properly kref's the object in which it is embedded. This slight change is
needed for future conversions of MR and QP which are refcounted before the
release and kfree.
The ideal flow from ib_core perspective as follows:
* Allocate ib_* structure with rdma_zalloc_*.
* Set everything that is known to ib_core to that newly created object.
* Initialize kref with restrack help
* Call to driver specific allocation functions.
* Insert into restrack DB
....
* Return and release restrack with restrack_put.
Largely this means a rdma_restrack_new() should be called near allocating
the containing structure.
Link: https://lore.kernel.org/r/20200922091106.2152715-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Leon Romanovsky says:
====================
IBTA declares speed as 16 bits, but kernel stores it in u8. This series
fixes in-kernel declaration while keeping external interface intact.
====================
Based on the mlx5-next branch at
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
due to dependencies.
* branch 'mlx5_active_speed':
RDMA: Fix link active_speed size
RDMA/mlx5: Delete duplicated mlx5_ptys_width enum
net/mlx5: Refactor query port speed functions
Like any other verbs objects, CQ shouldn't fail during destroy, but
mlx5_ib didn't follow this contract with mixed IB verbs objects with
DEVX. Such mix causes to the situation where FW and kernel are fully
interdependent on the reference counting of each side.
Kernel verbs and drivers that don't have DEVX flows shouldn't fail.
Fixes: e39afe3d6d ("RDMA: Convert CQ allocations to be under core responsibility")
Link: https://lore.kernel.org/r/20200907120921.476363-7-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In similar way to other IB objects, restore the ability to return error on
SRQ destroy. Strictly speaking, this change is not necessary, and provided
here to ensure a symmetrical interface like other destroy functions.
Fixes: 68e326dea1 ("RDMA: Handle SRQ allocations by IB/core")
Link: https://lore.kernel.org/r/20200907120921.476363-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Like any other IB verbs objects, AH are refcounted by ib_core. The release
of those objects are controlled by ib_core with promise that AH destroy
can't fail.
Being SW object for now, this change makes dealloc_ah() to behave like any
other destroy IB flows.
Fixes: d345691471 ("RDMA: Handle AH allocations by IB/core")
Link: https://lore.kernel.org/r/20200907120921.476363-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The IB verbs objects are counted by the kernel and ib_core ensures that
deallocate PD will success so it will be called once all other objects
that depends on PD will be released. This is achieved by managing various
reference counters on such objects.
The mlx5 driver didn't follow this standard flow when allowed DEVX objects
that are not managed by ib_core to be interleaved with the ones under
ib_core responsibility.
In such interleaved scenarios deallocate command can fail and ib_core will
leave uobject in internal DB and attempt to clean it later to free
resources anyway.
This change partially restores returned value from dealloc_pd() for all
drivers, but keeping in mind that non-DEVX devices and kernel verbs paths
shouldn't fail.
Fixes: 21a428a019 ("RDMA: Handle PD allocations by IB/core")
Link: https://lore.kernel.org/r/20200907120921.476363-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When the returned speed from __ethtool_get_link_ksettings() is
SPEED_UNKNOWN this will lead to reporting a wrong speed and width for
providers that uses ib_get_eth_speed(), fix that by defaulting the
netdev_speed to SPEED_1000 in case the returned value from
__ethtool_get_link_ksettings() is SPEED_UNKNOWN.
Fixes: d41861942f ("IB/core: Add generic function to extract IB speed from netdev")
Link: https://lore.kernel.org/r/20200902124304.170912-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
