This is unnecessary in clk_mgr
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Every other CM LUT power down sequence is deferred to next vupdate as
memory powerdown updates immediately while selecting LUTs is double
buffered. Previous update to defer LUT power down missed GAMCOR and
DSCL, causing some visible flicker when entering/exiting fullscreen
video playback.
[HOW]
Update dpp deferred update loop to check for valid DPPs in res_pool
instead of referencing dcn_ip which turns out to not be populated during
runtime. Move GAMCOR and DSCL powerdown to dpp deferred updates.
Reviewed-by: Haonan Wang <Haonan.Wang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
i2c memory doesn't get set to light sleep on hw init as intended
[HOW]
Set i2c to light sleep after reg gets zeroed, ensuring memory power
control doesn't get disabled for any other DIO memory
Reviewed-by: Haonan Wang <Haonan.Wang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Crash when USB4 is connected.
[How]
Added an ASIC specific code guard.
Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Ahmad Othman <Ahmad.Othman@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
As part of the FPU isolation work documented in
https://patchwork.freedesktop.org/series/93042/, isolate code that uses
FPU in DSC to DML, where all FPU code should locate.
This change does not refactor any functions but move code around.
Cc: Christian König <christian.koenig@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Anson Jacob <Anson.Jacob@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Tested-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Created new fields that matches new B0 structs On DCN31 the mapping of
DIO output to PHY differs from A0 to B0 boards with new PHY C20 & this
new mapping needed to be handled.
[How]
Mapped new structure based on new structs Added logic for mapping over
A0 and B0 boards Hooked all new structs together.
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Ahmad Othman <Ahmad.Othman@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To expose new power optimization flags to PSR interface. It allows the
PSR related power features can be enabled separately base on different
use scenarios.
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Robin Chen <po-tchen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Updating certain variable blanking calculations to use ceiling function.
Reviewed-by: Chris Park <chris.park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Bing Guo <Bing.Guo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Limit when FPU is enabled to only functions that does FPU operations for
dcn20_resource_construct, which gets called during driver
initialization.
Enabling FPU operation disables preemption. Sleeping functions(mutex
(un)lock, memory allocation using GFP_KERNEL, etc.) should not be called
when preemption is disabled.
Fixes the following case caught by enabling
CONFIG_DEBUG_ATOMIC_SLEEP in kernel config
[ 1.338434] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:281
[ 1.347395] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 197, name: systemd-udevd
[ 1.356356] CPU: 7 PID: 197 Comm: systemd-udevd Not tainted 5.13.0+ #3
[ 1.356358] Hardware name: System manufacturer System Product Name/PRIME X570-PRO, BIOS 3405 02/01/2021
[ 1.356360] Call Trace:
[ 1.356361] dump_stack+0x6b/0x86
[ 1.356366] ___might_sleep.cold+0x87/0x98
[ 1.356370] __might_sleep+0x4b/0x80
[ 1.356372] mutex_lock+0x21/0x50
[ 1.356376] smu_get_uclk_dpm_states+0x3f/0x80 [amdgpu]
[ 1.356538] pp_nv_get_uclk_dpm_states+0x35/0x50 [amdgpu]
[ 1.356711] init_soc_bounding_box+0xf9/0x210 [amdgpu]
[ 1.356892] ? create_object+0x20d/0x340
[ 1.356897] ? dcn20_resource_construct+0x46f/0xd30 [amdgpu]
[ 1.357077] dcn20_resource_construct+0x4b1/0xd30 [amdgpu]
...
Tested on: 5700XT (NAVI10 0x1002:0x731F 0x1DA2:0xE410 0xC1)
Cc: Christian König <christian.koenig@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Anson Jacob <Anson.Jacob@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When the vbios config and driver config are different, if we update
clock to lower before call program_timing and program_pixel_clk, garbage
appear.
[How]
Align bw context with hw config when system resume
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Lewis Huang <Lewis.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stutter mode is a power saving feature on GPUs, however at
least one early raven system exhibits stability issues with
it. Add a quirk to disable it for that system.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=214417
Fixes: 005440066f ("drm/amdgpu: enable gfxoff again on raven series (v2)")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmF298ceHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGIJYH/1rsEFQQ6caeQdy1
z9eFIe48DNM4l7bFk+qEj2UAbzPdahVJ299Mg5fW0n2CDemOc9/n0b9TxQ37YObi
mOzu0xwJVupIxkyFMPQSSc2q8aLm67NSpJy08DsmaNses5hSvu8x15RPHLQTybjt
SwtKns+jpCq79P1GWbrB5e5UkLb0VNoxNp4L1U4pMrYGcEkJUXbaxNY2V/JcXdM7
Vtn+qN0T/J6V6QVftv0t8Ecj3bjEnmL3kZHaTaNg3dGeKRpCGyHc5lcBQ0cNFG6t
vjZ9VbuhBzGI3TN2tHH5hpA1UXo7HPBBCwQqxF1jeGLGHULikYwZ3TAPWqL3QZqC
9cxr9SY=
=p75d
-----END PGP SIGNATURE-----
BackMerge tag 'v5.15-rc7' into drm-next
The msm next tree is based on rc3, so let's just backmerge rc7 before pulling it in.
Signed-off-by: Dave Airlie <airlied@redhat.com>
[Why]
A deadlock in the kernel occurs when we fallback from the V3 to V2
add_topology_to_display or remove_topology_to_display because they
both try to acquire the dtm_mutex but recursive locking isn't
supported on mutex_lock().
[How]
Make the mutex_lock/unlock more fine grained and move them up such that
they're only required for the psp invocation itself.
Fixes: bf62221e9d ("drm/amd/display: Add DCN3.1 HDCP support")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[WHY]
On certain configs, SMU clock table voltages don't match which cause parser
to behave incorrectly by leaving dcfclk and socclk table entries unpopulated.
[HOW]
Currently the function that finds the corresponding clock for a given voltage
only checks for exact voltage level matches. In the case that no match gets
found, parser now falls back to searching for the max clock which meets the
requested voltage (i.e. its corresponding voltage is below requested).
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
CVE-2021-42327 was fixed by:
commit f23750b5b3
Author: Thelford Williams <tdwilliamsiv@gmail.com>
Date: Wed Oct 13 16:04:13 2021 -0400
drm/amdgpu: fix out of bounds write
but amdgpu_dm_debugfs.c contains more of the same issue so fix the
remaining ones.
v2:
* Add missing fix in dp_max_bpc_write (Harry Wentland)
Fixes: 918698d5c2 ("drm/amd/display: Return the number of bytes parsed than allocated")
Signed-off-by: Patrik Jakobsson <pjakobsson@suse.de>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
UAPI Changes:
Nope!
Cross-subsystem Changes:
drm_dp_update_payload_part1() takes a new argument for specifying what the
VCPI slot start is
Core Changes:
Make the DP MST helpers aware of the current starting VCPI slot/VCPI total
slot count...
Driver Changes:
...and then add support for taking advantage of this for 128b/132b links on DP
2.0 for amdgpu
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bf8e724cc0c8803d58a8d730fd6883c991376a76.camel@redhat.com
Need to guard some things with CONFIG_DRM_AMD_DC_DCN.
Fixes: 41724ea273 ("drm/amd/display: Add DP 2.0 MST DM Support")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Dave Airlie <airlied@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211027223914.1776061-1-alexander.deucher@amd.com
[Why]
Add DP2 MST and debugfs support
[How]
Update the slot info based on the link encoding format
Reviewed-by: "Lin, Wayne" <Wayne.Lin@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025223825.301703-5-lyude@redhat.com
[Why]
configure/call DC interface for DP2 mst support. This is needed to make DP2
mst work.
[How]
- add encoding type, logging, mst update/reduce payload functions
Use the link encoding to determine the DP type (1.4 or 2.0) and add a
flag to dc_stream_update to determine whether to increase/reduce
payloads.
v2:
* add DP_UNKNOWN_ENCODING handling
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Reviewed-by: "Lin, Wayne" <Wayne.Lin@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025223825.301703-4-lyude@redhat.com
8b/10b encoding format requires to reserve the first slot for
recording metadata. Real data transmission starts from the second slot,
with a total of available 63 slots available.
In 128b/132b encoding format, metadata is transmitted separately
in LLCP packet before MTP. Real data transmission starts from
the first slot, with a total of 64 slots available.
v2:
* Move total/start slots to mst_state, and copy it to mst_mgr in
atomic_check
v3:
* Only keep the slot info on the mst_state
* add a start_slot parameter to the payload function, to facilitate non
atomic drivers (this is a temporary workaround and should be removed when
we are moving out the non atomic driver helpers)
v4:
*fixed typo and formatting
v5: (no functional changes)
* Fixed formatting in drm_dp_mst_update_slots()
* Reference mst_state instead of mst_state->mgr for debugging info
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
[v5 nitpicks]
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025223825.301703-3-lyude@redhat.com
This reverts commits ddab8bd788 ("drm/amd/display: Fix two cursor duplication
when using overlay") and e7d9560aea ("Revert "drm/amd/display: Fix overlay
validation by considering cursors"").
tl;dr ChromeOS uses the atomic interface for everything except the cursor. This
is incorrect and forces amdgpu to disable some hardware features. Let's revert
the ChromeOS-specific workaround in mainline and allow the Chrome team to keep
it internally in their own tree.
See [1] for more details. This patch is an alternative to [2], which added
ChromeOS detection.
[1]: https://lore.kernel.org/amd-gfx/JIQ_93_cHcshiIDsrMU1huBzx9P9LVQxucx8hQArpQu7Wk5DrCl_vTXj_Q20m_L-8C8A5dSpNcSJ8ehfcCrsQpfB5QG_Spn14EYkH9chtg0=@emersion.fr/
[2]: https://lore.kernel.org/amd-gfx/20211011151609.452132-1-contact@emersion.fr/
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Sean Paul <seanpaul@chromium.org>
Fixes: ddab8bd788 ("drm/amd/display: Fix two cursor duplication when using overlay")
Fixes: e7d9560aea ("Revert "drm/amd/display: Fix overlay validation by considering cursors"")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
B0 internal rev_id is 0x01, B1 internal rev_id is 0x02.
The external rev_id for B0 and B1 is 0x20.
The original expression is not suitable for B1.
v2: squash in fix for display code (Alex)
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
bios_golden_init will override dccg_init during init_hw.
[How]
Move dccg_init to after bios_golden_init.
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[why]
The original latencies were causing underflow in some modes
[how]
Replace with the up-to-date watermark values based on new measurments
Reviewed-by: Ahmad Othman <ahmad.othman@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
Z9 latency is higher than when we originally tuned the watermark
parameters, causing underflow. Increasing the value until the latency
issues is resolved.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
Immediate flip can be enabled dynamically and has higher BW requirements
when validating which voltage mode to use.
If we validate when it's not set then potentially DCFCLK will be too low
and we will underflow.
[How]
DM always requires support so always require it as part of DML input
parameters.
This can't be enabled unconditionally on older ASIC because it blocks
some expected modes so only target DCN3.1 for now.
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
Prefetch BW calculated is lower than the DML reference because of a
porting error that's excluding cursor and row bandwidth from the
pixel data bandwidth.
[How]
Change the dml_max4 to dml_max3 and include cursor and row bandwidth
in the same calculation as the rest of the pixel data during vactive.
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[why]
The requirement is that image width up to 4096 shall be supported
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Size can be any value and is user controlled resulting in overwriting the
40 byte array wr_buf with an arbitrary length of data from buf.
Signed-off-by: Thelford Williams <tdwilliamsiv@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
B0 internal rev_id is 0x01, B1 internal rev_id is 0x02.
The external rev_id for B0 and B1 is 0x20.
The original expression is not suitable for B1.
v2: squash in fix for display code (Alex)
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 1445d967fb.
This patch introduced a couple of dmesg warnings, this is not a valid
approach anymore. For this reason, we are reverting this patch, and we
need to revert the workaround patch.
v2: squash in unused variable removal (Alex)
Cc: Hanghong Ma <hanghong.ma@amd.com>
Cc: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
V3_4 is latest in use.
[How]
Add bios parser support for firmware_info_v3_4 along
with some relevant fields it is also retrieving from dce_info
and smu_info.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This DC patchset brings improvements in multiple areas. In summary, we
highlight:
* Fix some issues such as DP2 problem, prefetch bandwidth calculation
for DCN3.1 and others.
* Increased Z9 latency and removed z10 save after dsc disable.
* Revert a couple of bad changes.
* Added missing PSR state patch.
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Disable hdmistream and hdmichar root clocks when not being used.
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
bios_golden_init will override dccg_init during init_hw.
[How]
Move dccg_init to after bios_golden_init.
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Z10 save is done during PSR and bootup.
DSC disable does not need to save for Z10.
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Disable dpstreamclk, symclk32_se, and symclk32_le when not in use.
Reviewed-by: Ariel Bernstein <eric.yang2@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
The original latencies were causing underflow in some modes
[how]
Replace with the up-to-date watermark values based on new measurments
Reviewed-by: Ahmad Othman <ahmad.othman@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Z9 latency is higher than when we originally tuned the watermark
parameters, causing underflow. Increasing the value until the latency
issues is resolved.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Immediate flip can be enabled dynamically and has higher BW requirements
when validating which voltage mode to use.
If we validate when it's not set then potentially DCFCLK will be too low
and we will underflow.
[How]
DM always requires support so always require it as part of DML input
parameters.
This can't be enabled unconditionally on older ASIC because it blocks
some expected modes so only target DCN3.1 for now.
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Disable root clock for dsc when not being used.
Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
PSR_STATE2b was introduced on DMCUB side, but not on the driver side,
which caused convert_psr_state helper function to return
PSR_STATE_INVALID. That caused visual lagging during state transition.
[how]
Add PSR_STATE2b to dc_psr_state and convert_psr_state
Reviewed-by: Wyatt Wood <Wyatt.Wood@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Prefetch BW calculated is lower than the DML reference because of a
porting error that's excluding cursor and row bandwidth from the
pixel data bandwidth.
[How]
Change the dml_max4 to dml_max3 and include cursor and row bandwidth
in the same calculation as the rest of the pixel data during vactive.
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remap phyd32clk to PHYF and PHYG for B0, PHYC and PHYD are unused
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Hansen <Hansen.Dsouza@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
The requirement is that image width up to 4096 shall be supported
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Error message on Linux when booting.
[How]
Removed power down on boot from DCN31 HW init
to match DCN10 HW init.
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Derek Lai <derek.lai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Calculation of scaling ratio can result in a crash due to zero'd src or
dst plane rects.
[How]
Validate that src and dst rects are valid before using for scaling
calculations.
Reviewed-by: Josip Pavic <Josip.Pavic@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hardware team has recommended to generically hard code this register to
0xFF as part of the effort to eventually remove this control. However
we set it to 0xF instead.
This causes 4 of audio 8ch to be muted.
Reviewed-by: Ariel Bernstein <eric.bernstein@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Increase width of some variables to avoid comparing integers of
different widths
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
One of the current VPG power on calls is unnecessary
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Some DP2.0 RX requires us to set MST_EN even for SST configuration.
We added this debug option so we can configure this temporary workaround
for the RX.
Reviewed-by: George Shen <george.shen@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When rapidly plugging and unplugging a DP sink, detection link
training can be mistakenly skipped.
This is due to the hotplug processing occurring before the
encoder assignment logic has had a chance to process the removal
of a stream. The encoder that would be used for detection link
training is then erroneously reported as already in use and
detection link training is skipped.
[How]
During hot plug processing, only determine a link encoder to be
unavailable for a particular link if it has been assigned to a
different link.
Reviewed-by: Meenakshikumar Somasundaram <Meenakshikumar.Somasundaram@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When copying a stream, the encoder assigned to it is copied too.
Encoder assignment should only happen when executing the encoder
assignment function link_encs_assign().
[How]
Clear the link encoder pointer for copied stream.
Reviewed-by: Meenakshikumar Somasundaram <Meenakshikumar.Somasundaram@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Disable root clock for dpp when not being used.
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
On renoir usb-c port stops functioning on resume after f/w update.
New dmub firmware caused regression due to conflict with dmcu.
With new dmub f/w dmcu is superseded and should be disabled.
[How]
- Disable dmcu for all dcn21.
Check dmesg for dmub f/w version.
The old firmware (before regression):
[drm] DMUB hardware initialized: version=0x00000001
All other versions require this patch for renoir.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1735
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Size can be any value and is user controlled resulting in overwriting the
40 byte array wr_buf with an arbitrary length of data from buf.
Signed-off-by: Thelford Williams <tdwilliamsiv@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
When system boots in headless mode, connecting a 4k display creates a
null pointer dereference due to hubp for a certain plane being null.
Add a condition to check for null hubp before dereferencing it.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCE legacy optimization path isn't well tested under new DC optimization
flow which can result in underflow occuring when initializing X11 on
Carrizo.
[How]
Retain the legacy optimization flow for DCE and keep the new one for DCN
to satisfy optimizations being correctly applied for ASIC that can
support it.
Fixes: 34316c1e56 ("drm/amd/display: Optimize bandwidth on following fast update")
Reported-by: Tom St Denis <tom.stdenis@amd.com>
Tested-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For optimal power savings on panels that can support it.
This was previously left disabled by default because of issues with
compositors that do not pageflip and scan out directly to the
frontbuffer.
For these compositors we now have detection methods that wait for x
number of pageflips after a full update - triggered by a buffer or
format change typically.
This may introduce bugs or new cases not tested by users so this is
only currently targeting newer DCN.
[How]
Add code in DM to set PSR state by default for newer DCN while falling
back to the feature mask for older.
Add a global debug flag that can be set to disable it for either.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The current logic checks whether the cursor plane blending
properties match the primary plane's. However that's wrong,
because the cursor is painted on all planes underneath. If
the cursor is over the primary plane and the overlay plane,
it's painted on both pipes.
Iterate over the CRTC planes and check their scaling match
the cursor's.
v4: fix typo in commit message (Harry)
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove all but the first include of reg_helper.h and core_types.h
from dcn201_clk_mgr.c.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Got Werror when building with Clang-13:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dpia.c:195:2:
error: variable 'ts' is used uninitialized whenever switch default is
taken [-Werror,-Wsometimes-uninitialized]
default:
^~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dpia.c:200:9:
note: uninitialized use occurs here
return ts;
^~
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dpia.c:180:2:
note: variable 'ts' is declared here
enum dpia_set_config_ts ts;
^
1 error generated.
Fix it.
Reported-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The variable result is being initialized with a value that is never
read, it is being updated immediately afterwards in both branches
of an if statement. The assignment is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DPALT detection for B0 PHY has its own set of RDPCSPIPE registers
[How]
Use RDPCSPIPE registers to detect if DPALT lane is 4 lane
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Hansen <Hansen.Dsouza@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[why]
The existing limit was mistakenly bigger than 4k for DCN 3.1
Reviewed-by: Zhan Liu <Zhan.Liu@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
Overriding link setting inside override_training_settings
result in fallback link settings being ignored. This can
potentially cause link training to always fail and consequently
result in an infinite loop of link training to occur in
dp_verify_link_cap during detection.
[How]
Since preferred link settings are already considered inside
decide_link_settings, skip the check in override_training_settings
to avoid infinite link training loops.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For those video format with 60 fps, the user space player could
ask for 120Hz for playback.
[How]
Add 120 in the table of common rates.
Signed-off-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
YELLOW_CARP_B0 address was not correct
[How]
Set YELLOW_CARP_B0 to 0x1A.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jude Shih <shenshih@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Condition variable sometimes terminated unexpectedly
[How]
Use wait_for_completion_timeout to avoid unexpected termination of CV
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jude Shih <shenshih@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
1. HPD callback function has deadlock problem
2. HPD status is not assigned
3. There is crash due to null pointer
4. link_enc is NULL in DPIA case
[How]
1. Fix deadlock problem by moving it out of the
drm_modeset_lock
2. Assign HPD status from the notify of outbox
from dmub FW
3. Fix the crash by checking if pin or enc exists
4. Use link_enc_cfg_get_link_enc_used_by_link to
dynamically assign
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jude Shih <shenshih@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
1. Remove unnecessary dummy interrupt source for USB4 HPD & HPD RX
2. Adjust parameter for DPCD writing of link training process of DPIA link
3. Adjust specific AUX defer delay for DPIA link
Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Additional debug flags that can be useful for testing USB4 DP
link training.
Add flags:
- 0x2 : Forces USB4 DP link to non-LTTPR mode
- 0x4 : Extends status read intervals to about 60s.
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DIB_BE_CNTL<i>.DIG_HPD_SELECT selects the HPD block being used
by the display endpoint assigned to DIG<i>. In the case of USB4
display endpoints, no physical HPD block is assigned.
[How]
Setting DIB_BE_CNTL<i>.DIG_HPD_SELECT to 5 indicates that no HPD
is assigned to a display endpoint. Firmware decrements the
HPD_SELECT value by 1 before writing it to the register.
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To process SET_CONFIG transactions with DMUB using inbox1 and
outbox1 mail boxes.
[How]
1) DMUB posts SET_CONFIG reply as an Outbox1 message of type
DMUB_OUT_CMD__SET_CONFIG_REPLY.
2) The dmub async to sync mechanism for AUX is modified to accommodate
SET_CONFIG commands for both command issue and reply code paths.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jude Shih <shenshih@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
To add support for dpia debug options.
Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We requires information from DPCD in order to identify USB4 DP
tunneling targets.
[How]
Add USB4 DP tunneling fields to DPCD struct and populate these fields
during sink detection.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To process SET_CONFIG transactions with DMUB using inbox1 and
outbox1 mail boxes.
[How]
1) Added inbox1 DPIA command subtype DMUB_CMD__DPIA_SET_CONFIG_ACCESS to
issue SET_CONFIG command to DMUB in dc_process_dmub_set_config_async().
DMUB processes the command with DPIA sends reply back immediately or
in an outbox1 message triggering an outbox1 interrupt to driver.
2) DMUB posts SET_CONFIG reply as an Outbox1 message of type
DMUB_OUT_CMD__SET_CONFIG_REPLY.
3) The dmub async to sync mechanism for AUX is modified to accommodate
SET_CONFIG commands for both command issue and reply code paths.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Clear training pattern sequence for hop in display path once clock
recovery and equalization phases of DP tunnel link training completed.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Equalisation is the mandatory second phase of DisplayPort link training
over a USB4 DP tunnel.
[How]
Implement equalisation phase for DP tunneled over USB4 in DPIA
training module.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Clock recovery is the mandatory first phase of DP link training.
[How]
- Implement clock recovery phase in DPIA training module.
- Add helper functions for building SET_CONFIG messages.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Training settings need to be applied to DPIA link at start of each
training loop. Note: FEC readiness should be configured before link
training while FEC enablement should be configured once training is
complete.
[How]
- Implement DPIA link configuration function.
- Account for dynamically assigned link encoders during link
configuration.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Training of DPIA link differs enough from that of conventional
DP link to warrant a separate implementation.
[How]
- Implement top-level of DPIA training loop.
- Make functions shared between DP and DPIA link training "public".
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Conventional links are trained with fallback during sink detection.
Have DPIA links trained with fallback too.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
Driver does not need to train the first hop.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
1. Add stub for getting tunneling device data
2. Add check for phy_repeater_cnt < 0xff to LTTPR check
3. Add two more bits of information to DPIA links
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
Add stub for DPIA link training and define new DPIA DMUB commands
to support it.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
We will need a way to distinguish physically connected
links and DPIA endpoints.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
To add support for HPD & HPD RX interrupt handling for USB4 DPIA in
YELLOW_CARP_B0. USB4 DPIA HPD & HPD RX interrupts are issued from DMUB to
driver as a outbox1 message.
[HOW]
1) Created get_link_index_from_dpia_port_index() to retrieve link index
from dpia port index for HPD & HPD RX dmub notifications.
2) Added DMUB HPD & HPD RX handling in dmub_srv_stat_get_notification().
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
To enable dc links for USB4 DPIA ports and AUX command tunneling
for YELLOW_CARP_B0.
[HOW]
1) Created dc links for all USB4 DPIA ports in create_links().
dc_link_construct() implementation is split for legacy DDC and DPIAs.
As usb4 has no ddc, ddc->ddc_pin will be set to NULL for its dc link
and this parameter will be used to identify the dc links as DPIA. The
dc link for DPIA is further to be enhanced with implementation for link
encoder and link initialization.
2) usb4_dpia_count in struct resource_pool will be initialized to 4 in
dcn31_resource_construct() if the DCN is YELLOW_CARP_B0.
3) Enabled DMUB AUX via outbox for YELLOW_CARP_B0.
Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
USB4 endpoints are dynamically mapped. We create additional link
encoders for USB4 use when DC is created and destroy them when DC
is destructed
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ind_block_64b_no_128bcl means INDEP_64B && INDEP_128B &&
MAX_COMPRESSED_BLOCK_SIZE == 64B. Only used by gfx10.3.
ind_block_64b means INDEP_64B && !INDEP_128B &&
MAX_COMPRESSED_BLOCK_SIZE == 64B. Only used by gfx9 and gfx10.
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During DQE's promotion test, error appears in dmesg at boot
on dcn3.1;
[How]
Add NULL pointor check for the pointor to the amdgpu_dm_connector;
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Trying to enable multiple displays simultaneously exposed shortcomings
with the algorithm for dynamic link encoder assignment.
The main problems were:
- Assuming stream order remained constant across states would
sometimes lead to invalid DIG encoder assignment.
- Incorrect logic for deciding whether or not a DIG could support a
stream would also sometimes lead to invalid DIG encoder assignment.
- Changes in encoder assignment were wholesale while updating of the
pipe backend is incremental. This would lead to the hardware state
not matching the software state even with valid encoder assignments.
[How]
The following changes fix the identified problems.
- Use stream pointer rather than stream index to track streams across
states.
- Fix DIG compatibility check by examining the link signal type
rather than the stream signal type.
- Modify assignment algorithm to make incremental updates so software
and hardware states remain coherent.
Additionally:
- Add assertions and an encoder assignment validation
function link_enc_cfg_validate() to detect potential problems with
encoder assignment closer to their root cause.
- Reduce the frequency with which the assignment algorithm is
executed. It should not be necessary for fast state validation.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
The codes to blank all dp display have been called many times,
so add a helper in dc_link to make it more concise.
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- New firmware version
- Fix DMUB problems on stress test.
- Improve link training by skip overrride for preferred link
- Refinement of FPU code structure for DCN2
- Fix 3DLUT skipped programming
- Fix detection of 4 lane for DPALT
- Fix dcn3 failure due to dmcbu_abm not created
- Limit display scaling to up to 4k for DCN 3.1
- Add helper for blanking all dp displays
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
