[why]
Remove force_ignore_link_settings debug option as it is no longer used.
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Adding support for Freesync HDMI to DC and DMCU
[How]
Create DC interface and implementation on top of DMCU to support
parsing CEA blocks in DMCU.
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Per-connector debugfs entry "trigger_hotplug" is available on DP/eDP only.
New IGT tests need this entry to test other outputs.
[How]
Enable this debugfs entry on all types of connectors
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The conditions for whether we used cached vs non-cached inbox1 depend
on a version check that mismatches what the shared helpers in dmub20
implement.
[How]
Use the dmub_dcn20_use_cached_inbox check for dmub_dcn30 as well.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Initial bounding box values are updated in dcn30_update_bw_bounding_box
but they use dcn3_0_soc and dcn3_0_ip instead of dcn3_02_soc and
dcn3_02_ip
[How]
Add dcn302_update_bw_bounding_box and
dcn302_get_optimal_dcfclk_fclk_for_uclk so it uses
dcn3_02_soc and dcn3_02_ip.
Use sr_exit_time_us, sr_enter_plus_exit_time_us,
from dcn30 on dcn302 to fix flicker on eDP.
Also use dram_clock_change_latency_us from dcn30.
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some panels contain active converters (e.g. DP to MIPI) which only support
restricted DSC configurations. DID2.0 adds support for such displays to
explicitly define per timing BPP restrictions on DSC. Ignoring these
restrictions leads to blackscreen.
[How]
Add parsing in DID2.0 parser to get this bpp info.
Add support in DSC module to constraint target bpp based
on this info.
Signed-off-by: Jun Lei <jun.lei@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
prev_sink is not used anywhere else in the function and the reference to
it from dc_link is replaced with a new dc_sink.
[how]
Change dc_sink_retain(prev_sink) to dc_sink_release(prev_sink).
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Need to unassign DSC from pipes that are not using it
so other pipes can acquire it. That is needed for
asic's that have unmatching number of DSC engines from
the number of pipes.
[how]
Before acquiring dsc to stream resources, first remove it.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Eryk Brol <Eryk.Brol@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit b24bdc37d0.
It caused memory leak after S3 on 4K HDMI displays.
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The PWL backlight curve is used by the firmware to convert between
brightness and linear PWM value.
Driver has a backlight LUT, but the firmware holds a PWL curve and
interpolates between points.
The calculations are incorrect leading to slightly off backlight values
being programmed.
[How]
Fix the PWL backlight curve threshold/offset calculations
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Josip Pavic <Josip.Pavic@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This DC update brings improvements in multiple areas. In summary, we highlight:
- Fix display detection on HDMI ComboPHY
- Drop SOC bounding box hookup
- Fix DPCD values
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Add field for passing line time for a frame
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
When enabling HDMI on ComboPHY, there are not
enough clock sources to complete display detection.
[HOW]
Initialize more clock sources.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
In HDCP update stream config interface, some variables are named as
xxx_supported, but in fact the variable indicates whether or not xxx_enabled.
Correct the naming so it is less confusing to read the code.
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In seamless boot without a flip case, the flag power_gated didn't
get cleared when resetting path mode because the plane_state is null.
The following sequence will cause this issue:
1. OS call set mode to clone/extended
2. Reset path mode to remove edp
[How]
Set power gated default to true in seamless boot pipe
Signed-off-by: Lewis Huang <Lewis.Huang@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Currently we discard the current context and recreate it. The current
context is what is applied to the HW so we should be re-using this
rather than creating a new context.
Recreating the context can lead to mismatch between new context and the
current context
For example: gsl groups get changed when we create a new context this
can cause issues in a multi display config (with flip immediate) because
we don't align the existing gsl groups in the new and current context.
If we reuse the current context the gsl group assignment stays the same.
[How]
Instead of discarding the current context, we instead just copy the
current state and add/remove planes and streams.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Safeguarding as pointer may be null in diagnostic environment
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Reviewed-by: Sung Lee <Sung.Lee@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some dcnxxx__resource.c do not initialize the i2c speed; this patch adds
the required initialization at dc_construct().
Signed-off-by: Brendan Steve Leder <brendanSteve.Leder@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The translation between the DPCD value and the specified AUX_RD_INTERVAL
in the DP spec do not match.
[How]
Update values to match the spec.
Signed-off-by: George Shen <george.shen@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There aren't any ASIC where we use these binaries and they aren't
useful for future use since it's inconvenient to extend and maintain
these structures.
[How]
Drop the support from DM and DC for now.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Acked-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following coccicheck warning:
./drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c:3137:35-40:
WARNING: conversion to bool not needed here
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Suggested-by: Yang Li <oswb@linux.alibaba.com>
Signed-off-by: Abaci Team <abaci-bugfix@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fixes corrupted display output in HDMI deep color
10/12 bpc mode at least as observed on AMD Mullins, DCE-8.3.
It will hopefully also provide fixes for other DCE's up to
DCE-11, assuming those will need similar fixes, but i could
not test that for HDMI due to lack of suitable hw, so viewer
discretion is advised.
dce110_stream_encoder_hdmi_set_stream_attribute() is used for
HDMI setup on all DCE's and is missing color_depth assignment.
dce110_program_pix_clk() is used for pixel clock setup on HDMI
for DCE 6-11, and is missing color_depth assignment.
Additionally some of the underlying Atombios specific encoder
and pixelclock setup functions are missing code which is in
the classic amdgpu kms modesetting path and the in the radeon
kms driver for DCE6/DCE8.
encoder_control_digx_v3() - Was missing setup code wrt. amdgpu
and radeon kms classic drivers. Added here, but untested due to
lack of suitable test hw.
encoder_control_digx_v4() - Added missing setup code.
Successfully tested on AMD mullins / DCE-8.3 with HDMI deep color
output at 10 bpc and 12 bpc.
Note that encoder_control_digx_v5() has proper setup code in place
and is used, e.g., by DCE-11.2, but this code wasn't used for deep
color setup due to the missing cntl.color_depth setup in the calling
function for HDMI.
set_pixel_clock_v5() - Missing setup code wrt. classic amdgpu/radeon
kms. Added here, but untested due to lack of hw.
set_pixel_clock_v6() - Missing setup code added. Successfully tested
on AMD mullins DCE-8.3. This fixes corrupted display output at HDMI
deep color output with 10 bpc or 12 bpc.
Fixes: 4562236b3b ("drm/amd/dc: Add dc display driver (v2)")
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In set_clamp(), the comments and definitions for the COLOR_DEPTH_101010
and COLOR_DEPTH_121212 cases directly contradict the code comment which
explains how this should work, whereas the COLOR_DEPTH_888 case
is consistent with the code comments. Comment says the bitmask should
be chosen to align to the top-most 10 or 12 MSB's on a 14 bit bus, but
the implementation contradicts that: 10 bit case sets a mask for 12 bpc
clamping, whereas 12 bit case sets a mask for 14 bpc clamping.
Note that during my limited testing on DCE-8.3 (HDMI deep color)
and DCE-11.2 (DP deep color), this didn't have any obvious ill
effects, neither did fixing it change anything obvious for the
better, so this fix may be inconsequential on DCE, and just
reduce the confusion of innocent bystanders when reading the code
and trying to investigate problems with 10 bpc+ output.
Fixes: 4562236b3b ("drm/amd/dc: Add dc display driver (v2)")
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
clang warns about the -mhard-float command line arguments
on architectures that do not support this:
clang: error: argument unused during compilation: '-mhard-float' [-Werror,-Wunused-command-line-argument]
Move this into the gcc-specific arguments.
Fixes: e77165bf7b ("drm/amd/display: Add DCN3 blocks to Makefile")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The debug printk dereferences "link->link_enc" before we have ensured
that it is non-NULL. Fix this potential NULL derefence by moving the
printk after the check.
Fixes: 64ff088242 ("drm/amd/display: Log link/connector info provided in BIOS object table")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Change the license of color_table.c to match color_table.h granting
permission to modify and distribute.
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace "/" with div_u64 for 32-bit OS. On 32-bit OS,
the use of "/" for 64-bit division will cause build error,
i.e. "__udivdi3/__divdi3 undefined!".
Fixes: ea7154d8d9 ("drm/amd/display: Update dcn30_apply_idle_power_optimizations() code")
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 57eeaf47a6.
Original issue of flash line when MPO enabled on idle screen
was fixed by raising clocks. This had negative effect of extra
power being drained. With the upstream commit 9d03bb1020
("drm/amd/display: disable dcn10 pipe split by default")
flash line issue was fixed and had positive effect for
battery life. Hence this patch is no more required.
Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following coccicheck warnings:
./drivers/gpu/drm/amd/display/dc/dml/dcn30/display_rq_dlg_calc_30.c:
1009:6-16: WARNING: Assignment of 0/1 to bool variable.
./drivers/gpu/drm/amd/display/dc/dml/dcn30/display_rq_dlg_calc_30.c:
200:2-10: WARNING: Assignment of 0/1 to bool variable.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are two spelling mistakes of the function name, fix this
by using __func__ instead of a hard coded name string.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the function for idle optimizations
-remove hardcoded size
-enable no memory-request case
-add cursor copy
-update mall eligibility check case
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Currently we use the maximum possible cursor cache size when deciding if we
should attempt to enable MALL, but this prevents us from enabling the
feature for certain key use cases.
[How]
- consider cursor bpp when calculating if the cursor fits
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-Uncomment watermark set d
-This populates the wm table so that it can be sent to PMFW
-This watermark table is used when we are in mall stutter
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Anson Jacob <anson.jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
dram clock change latencies get updated using ddr4 latency table, but
that update does not happen before validation. This value
should not be the default and should be number received from
df for better mode support.
This may cause a PState hang on high refresh panels with short vblanks
such as on 1080p 360hz or 300hz panels.
[HOW]
Update latency from 23.84 to 11.72.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Reviewed-by: Sung Lee <Sung.Lee@amd.com>
Acked-by: Anson Jacob <anson.jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When no displays are currently enabled, display driver should not
disallow PSTATE switching.
[How]
Allow PSTATE switching if either the active configuration supports it,
or there are no active displays.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <anson.jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Why:
dml20v2_ModeSupportAndSystemConfigurationFull() didn't check against
DesiredBPP, so it doesn't work correctly when DesiredBPP can't be satisfied.
How:
Port the TruncToValidBPP() version from display_mode_vba_21.c to
display_mode_vba_20v2.c.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Bing Guo <bing.guo@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <anson.jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
Add logging statements to assist in debugging
errors in the BIOS object table.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Anson Jacob <anson.jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
FW version check doesn't allow dmu_stg to support cached inbox,
which yields much better performance than region 4.
[How]
Check a range of fw versions, rather than a simple greater than check.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Anson Jacob <anson.jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Why:
Function decide_dp_link_settings() loops infinitely when required bandwidth
can't be supported.
How:
Check the required bandwidth against verified_link_cap before trying to
find a link setting for it.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Bing Guo <bing.guo@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <anson.jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DMCUB encounters a page fault/double exception with driver direct load
because DMCUB is not held in soft reset after releasing secure reset.
The clean shutdown sequence via GPINT is also not executed in this
sequence which leaves hardware behavior in an indeterminate state.
[How]
Move reset earlier in the sequence.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Anson Jacob <anson.jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If the BIOS table is invalid or corrupt then get_i2c_info can fail
and we dereference a NULL pointer.
[How]
Check that ddc_pin is not NULL before using it and log an error if it
is because this is unexpected.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Anson Jacob <anson.jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We need hardware reset before hardware init for backdoor loading when
we're reusing the framebuffer memory.
[How]
This doesn't run if the hardware isn't already in reset from software
perspective. The reset function has register level checks so just
remove the software one here.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Anson Jacob <anson.jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Since Linux 5.9.0, DRM has provided vrr_range debugfs for
all connectors. Reporting Freesync capability to vrr_range
debugfs entry registered in Linux DM no longer works.
[How]
Report min/max vertical frequency to vrr_range debugfs entrry
created by DRM connectors. Remove vrr_range debugfs entry from
Linux DM.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Anson Jacob <anson.jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
These can differ per ASIC or not be present. Don't call the dcn20 ones
directly but rather the ones defined by the ASIC init table.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Anson Jacob <anson.jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Previously as MPO + ODM Combine was not supported, finding secondary pipes
for each case was mutually exclusive. Now that both are supported at the same
time, both cases should be taken into account when finding a secondary pipe.
[HOW]
If a secondary pipe cannot be found based on previous bottom pipe,
search for a second pipe using next_odm_pipe instead.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Anson Jacob <anson.jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
FEC over eDP support is incomplete.
[How]
Disable FEC over eDP.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Mike Hsieh <chun-wei.hsieh@amd.com>
Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com>
Acked-by: Anson Jacob <anson.jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Heavy corruption or blank screen reported on wake,
with 6k display connected and FEC enabled
[how]
When Disable/Enable stream for display pipes on HPDRX,
DC should take into account ODM split pipes.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Vladimir Stempen <vladimir.stempen@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Anson Jacob <anson.jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amd-drm-next-5.12-2021-01-20:
amdgpu:
- Fix non-x86 build
- W=1 fixes from Lee Jones
- Enable GPU reset on Navy Flounder
- Kernel doc fixes
- SMU workload profile fixes for APUs
- Display updates
- SR-IOV fixes
- Vangogh SMU feature enablment and bug fixes
- GPU reset support for Vangogh
- Misc cleanups
Conflicts:
drivers/gpu/drm/amd/display/dc/dcn10/dcn10_mpc.c
Resolve the conflict by picking the initialization value from amd from
f03e80d2e8 ("drm/amd/display: Initialize stack variable") over the
one Linus picked in 61d791365b ("drm/amd/display: avoid
uninitialized variable warning"). It shouldn't matter.
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210120060951.22600-1-alexander.deucher@amd.com
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Follow the coding style of size of a struct, changing to:
p = kmalloc(sizeof(*p), ...);
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The buffer is allocated with the size of pointer and copy with the size of
data structure. Then trigger the system memory page fault. Use the
orignal data structure to get the object size.
Fixes: 3a00c04212 ("drm/amd/display/dc/core/dc_link: Move some local data from the stack to the heap")
Signed-off-by: Huang Rui <ray.huang@amd.com>
Cc: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Jinzhou.Su <Jinzhou.Su@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amd-drm-next-5.12-2021-01-08:
amdgpu:
- Rework IH ring handling on vega and navi
- Rework HDP handling for vega and navi
- swSMU documenation updates
- Overdrive support for Sienna Cichlid and newer asics
- swSMU updates for vangogh
- swSMU updates for renoir
- Enable FP16 on DCE8-11
- Misc code cleanups and bug fixes
radeon:
- Fixes for platforms that can't access PCI resources correctly
- Misc code cleanups
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210108221811.3868-1-alexander.deucher@amd.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fix the following coccicheck warning:
./drivers/gpu/drm/amd/display/dc/dml/dcn20/display_mode_vba_20.c:3141:30-39:
WARNING: Comparison to bool
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <abaci-bugfix@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following coccicheck warning:
./drivers/gpu/drm/amd/display/dc/dml/dcn21/display_mode_vba_21.c:5121:14-38:
WARNING: Comparison to bool
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <abaci-bugfix@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following coccicheck warning:
./drivers/gpu/drm/amd/display/dc/dcn10/dcn10_dpp_cm.c:580:23-31:
WARNING: Comparison to bool
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <abaci-bugfix@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following coccicheck warning:
./drivers/gpu/drm/amd/display/dc/dml/dcn30/display_mode_vba_30.c:1228:9-20:
WARNING: Comparison to bool
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <abaci-bugfix@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link.c:214: warning: Function parameter or member 'link' not described in 'dc_link_detect_sink'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link.c:350: warning: Function parameter or member 'link' not described in 'dc_link_is_dp_sink_present'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link.c:841: warning: Function parameter or member 'link' not described in 'dc_link_detect_helper'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link.c:841: warning: Function parameter or member 'reason' not described in 'dc_link_detect_helper'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link.c:3403: warning: Cannot understand *****************************************************************************
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_resource.c:1710: warning: Function parameter or member 'old_stream' not described in 'dc_is_stream_unchanged'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_resource.c:1710: warning: Function parameter or member 'stream' not described in 'dc_is_stream_unchanged'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_resource.c:1726: warning: Function parameter or member 'old_stream' not described in 'dc_is_stream_scaling_unchanged'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_resource.c:1726: warning: Function parameter or member 'stream' not described in 'dc_is_stream_scaling_unchanged'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_resource.c:1843: warning: Function parameter or member 'dc' not described in 'dc_add_stream_to_ctx'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_resource.c:1843: warning: Function parameter or member 'new_ctx' not described in 'dc_add_stream_to_ctx'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_resource.c:1843: warning: Function parameter or member 'stream' not described in 'dc_add_stream_to_ctx'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_resource.c:1870: warning: Function parameter or member 'dc' not described in 'dc_remove_stream_from_ctx'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_resource.c:1870: warning: Function parameter or member 'new_ctx' not described in 'dc_remove_stream_from_ctx'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_resource.c:1870: warning: Function parameter or member 'stream' not described in 'dc_remove_stream_from_ctx'
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:287: warning: Cannot understand *****************************************************************************
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:366: warning: Function parameter or member 'crc_window' not described in 'dc_stream_configure_crc'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:430: warning: Function parameter or member 'r_cr' not described in 'dc_stream_get_crc'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:430: warning: Function parameter or member 'g_y' not described in 'dc_stream_get_crc'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:430: warning: Function parameter or member 'b_cb' not described in 'dc_stream_get_crc'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:2026: warning: Function parameter or member 'dc' not described in 'dc_check_update_surfaces_for_stream'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:2026: warning: Function parameter or member 'updates' not described in 'dc_check_update_surfaces_for_stream'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:2026: warning: Function parameter or member 'surface_count' not described in 'dc_check_update_surfaces_for_stream'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:2026: warning: Function parameter or member 'stream_update' not described in 'dc_check_update_surfaces_for_stream'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:2026: warning: Function parameter or member 'stream_status' not described in 'dc_check_update_surfaces_for_stream'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:2822: warning: Function parameter or member 'dc' not described in 'dc_interrupt_set'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:2822: warning: Function parameter or member 'src' not described in 'dc_interrupt_set'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:2822: warning: Function parameter or member 'enable' not described in 'dc_interrupt_set'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:2962: warning: Function parameter or member 'link' not described in 'dc_link_add_remote_sink'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:2962: warning: Function parameter or member 'edid' not described in 'dc_link_add_remote_sink'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:2962: warning: Function parameter or member 'len' not described in 'dc_link_add_remote_sink'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:2962: warning: Function parameter or member 'init_data' not described in 'dc_link_add_remote_sink'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:3022: warning: Function parameter or member 'link' not described in 'dc_link_remove_remote_sink'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:3022: warning: Function parameter or member 'sink' not described in 'dc_link_remove_remote_sink'
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It looks like it could be used inside the DC_TRACE_LEVEL_MESSAGE() macro.
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c: In function ‘dpcd_set_source_specific_data’:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:4403:18: warning: variable ‘result_write_min_hblank’ set but not used [-Wunused-but-set-variable]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link.c: In function ‘dc_link_construct’:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link.c:1588:1: warning: the frame size of 1176 bytes is larger than 1024 bytes [-Wframe-larger-than=]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:1115:23: warning: no previous prototype for ‘dce60_create_resource_pool’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:1312:23: warning: no previous prototype for ‘dce61_create_resource_pool’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:1505:23: warning: no previous prototype for ‘dce64_create_resource_pool’ [-Wmissing-prototypes]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Mauro Rossi <issor.oruam@gmail.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce80/dce80_resource.c:1126:23: warning: no previous prototype for ‘dce80_create_resource_pool’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce80/dce80_resource.c:1325:23: warning: no previous prototype for ‘dce81_create_resource_pool’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce80/dce80_resource.c:1520:23: warning: no previous prototype for ‘dce83_create_resource_pool’ [-Wmissing-prototypes]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Anthony Koo <Anthony.Koo@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
In file included from drivers/gpu/drm/amd/amdgpu/../display/dc/dce80/dce80_resource.c:29:
drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_8_0_sh_mask.h:9546:58: warning: initialized field overwritten [-Woverride-init]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.h:213:16: note: in expansion of macro ‘AUX_SW_DATA__AUX_SW_AUTOINCREMENT_DISABLE__SHIFT’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.h:102:2: note: in expansion of macro ‘AUX_SF’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce80/dce80_resource.c:305:2: note: in expansion of macro ‘DCE10_AUX_MASK_SH_LIST’
drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_8_0_sh_mask.h:9546:58: note: (near initialization for ‘aux_shift.AUX_SW_AUTOINCREMENT_DISABLE’)
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.h:213:16: note: in expansion of macro ‘AUX_SW_DATA__AUX_SW_AUTOINCREMENT_DISABLE__SHIFT’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.h:102:2: note: in expansion of macro ‘AUX_SF’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce80/dce80_resource.c:305:2: note: in expansion of macro ‘DCE10_AUX_MASK_SH_LIST’
drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_8_0_sh_mask.h:9545:56: warning: initialized field overwritten [-Woverride-init]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.h:213:16: note: in expansion of macro ‘AUX_SW_DATA__AUX_SW_AUTOINCREMENT_DISABLE_MASK’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.h:102:2: note: in expansion of macro ‘AUX_SF’
NB: Snipped lots for the sake of brevity
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
In file included from drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:28:
drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_6_0_d.h:568:43: warning: initialized field overwritten [-Woverride-init]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:155:14: note: in expansion of macro ‘mmCRTC0_DCFE_MEM_LIGHT_SLEEP_CNTL’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_transform.h:170:2: note: in expansion of macro ‘SRI’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:181:3: note: in expansion of macro ‘XFM_COMMON_REG_LIST_DCE60’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:185:3: note: in expansion of macro ‘transform_regs’
drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_6_0_d.h:568:43: note: (near initialization for ‘xfm_regs[0].DCFE_MEM_LIGHT_SLEEP_CNTL’)
drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:155:14: note: in expansion of macro ‘mmCRTC0_DCFE_MEM_LIGHT_SLEEP_CNTL’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_transform.h:170:2: note: in expansion of macro ‘SRI’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:181:3: note: in expansion of macro ‘XFM_COMMON_REG_LIST_DCE60’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:185:3: note: in expansion of macro ‘transform_regs’
drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_6_0_d.h:645:43: warning: initialized field overwritten [-Woverride-init]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:155:14: note: in expansion of macro ‘mmCRTC1_DCFE_MEM_LIGHT_SLEEP_CNTL’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_transform.h:170:2: note: in expansion of macro ‘SRI’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:181:3: note: in expansion of macro ‘XFM_COMMON_REG_LIST_DCE60’
NB: Snipped lots for the sake of brevity
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Mauro Rossi <issor.oruam@gmail.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
In file included from drivers/gpu/drm/amd/amdgpu/../display/dc/dce100/dce100_resource.c:54:
drivers/gpu/drm/amd/amdgpu/../display/dc/dce100/dce100_resource.c:537:3: note: in expansion of macro ‘MI_DCE8_MASK_SH_LIST’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce100/dce100_resource.c:537:3: note: in expansion of macro ‘MI_DCE8_MASK_SH_LIST’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce100/dce100_resource.c:542:3: note: in expansion of macro ‘MI_DCE8_MASK_SH_LIST’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce100/dce100_resource.c:542:3: note: in expansion of macro ‘MI_DCE8_MASK_SH_LIST’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce100/dce100_resource.c:547:2: note: in expansion of macro ‘DCE10_AUX_MASK_SH_LIST’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce100/dce100_resource.c:547:2: note: in expansion of macro ‘DCE10_AUX_MASK_SH_LIST’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce100/dce100_resource.c:551:2: note: in expansion of macro ‘DCE10_AUX_MASK_SH_LIST’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce100/dce100_resource.c:551:2: note: in expansion of macro ‘DCE10_AUX_MASK_SH_LIST’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce100/dce100_resource.c:889:16: warning: no previous prototype for ‘dce100_add_stream_to_ctx’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce100/dce100_resource.c:916:16: warning: no previous prototype for ‘dce100_validate_plane’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce100/dce100_resource.c:925:24: warning: no previous prototype for ‘dce100_find_first_free_match_stream_enc_for_link’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce100/dce100_resource.c:1156:23: warning: no previous prototype for ‘dce100_create_resource_pool’ [-Wmissing-prototypes]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Anthony Koo <Anthony.Koo@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
In file included from drivers/gpu/drm/amd/amdgpu/../display/dc/dce100/dce100_resource.c:54:
drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_10_0_sh_mask.h:5084:45: warning: initialized field overwritten [-Woverride-init]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:155:28: note: in expansion of macro ‘GRPH_CONTROL__GRPH_NUM_BANKS__SHIFT’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:170:2: note: in expansion of macro ‘SFB’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:291:2: note: in expansion of macro ‘MI_GFX8_TILE_MASK_SH_LIST’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce100/dce100_resource.c:537:3: note: in expansion of macro ‘MI_DCE8_MASK_SH_LIST’
drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_10_0_sh_mask.h:5084:45: note: (near initialization for ‘mi_shifts.GRPH_NUM_BANKS’)
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:155:28: note: in expansion of macro ‘GRPH_CONTROL__GRPH_NUM_BANKS__SHIFT’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:170:2: note: in expansion of macro ‘SFB’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:291:2: note: in expansion of macro ‘MI_GFX8_TILE_MASK_SH_LIST’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce100/dce100_resource.c:537:3: note: in expansion of macro ‘MI_DCE8_MASK_SH_LIST’
drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_10_0_sh_mask.h:5083:43: warning: initialized field overwritten [-Woverride-init]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:155:28: note: in expansion of macro ‘GRPH_CONTROL__GRPH_NUM_BANKS_MASK’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:170:2: note: in expansion of macro ‘SFB’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:291:2: note: in expansion of macro ‘MI_GFX8_TILE_MASK_SH_LIST’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce100/dce100_resource.c:542:3: note: in expansion of macro ‘MI_DCE8_MASK_SH_LIST’
drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_10_0_sh_mask.h:5083:43: note: (near initialization for ‘mi_masks.GRPH_NUM_BANKS’)
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:155:28: note: in expansion of macro ‘GRPH_CONTROL__GRPH_NUM_BANKS_MASK’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:170:2: note: in expansion of macro ‘SFB’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:291:2: note: in expansion of macro ‘MI_GFX8_TILE_MASK_SH_LIST’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce100/dce100_resource.c:542:3: note: in expansion of macro ‘MI_DCE8_MASK_SH_LIST’
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:806:6: warning: no previous prototype for ‘apply_ctx_interdependent_lock’ [-Wmissing-prototypes]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:883:6: warning: no previous prototype for ‘dce112_validate_bandwidth’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:1008:16: warning: no previous prototype for ‘dce112_add_stream_to_ctx’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:1407:23: warning: no previous prototype for ‘dce112_create_resource_pool’ [-Wmissing-prototypes]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Anthony Koo <Anthony.Koo@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:3710:19: warning: no previous prototype for ‘linkRateInKHzToLinkRateMultiplier’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c: In function ‘dpcd_set_source_specific_data’:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:4403:18: warning: variable ‘result_write_min_hblank’ set but not used [-Wunused-but-set-variable]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link.c: In function ‘query_hdcp_capability’:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link.c:599:28: warning: variable ‘status’ set but not used [-Wunused-but-set-variable]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_resource.c:1120:5: warning: no previous prototype for ‘shift_border_left_to_dst’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_resource.c:1131:6: warning: no previous prototype for ‘restore_border_left_from_dst’ [-Wmissing-prototypes]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/modules/info_packet/info_packet.c:412: warning: Cannot understand *****************************************************************************
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/modules/power/power_helpers.c:281:6: warning: no previous prototype for ‘fill_iram_v_2’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/modules/power/power_helpers.c:455:6: warning: no previous prototype for ‘fill_iram_v_2_2’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/modules/power/power_helpers.c:601:6: warning: no previous prototype for ‘fill_iram_v_2_3’ [-Wmissing-prototypes]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dmub/src/dmub_dcn30.c:83:6: warning: no previous prototype for ‘dmub_dcn30_backdoor_load’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dmub/src/dmub_dcn30.c:118:6: warning: no previous prototype for ‘dmub_dcn30_setup_windows’ [-Wmissing-prototypes]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dc_helper.c:299:10: warning: no previous prototype for ‘generic_reg_get’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dc_helper.c:307:10: warning: no previous prototype for ‘generic_reg_get2’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dc_helper.c:317:10: warning: no previous prototype for ‘generic_reg_get3’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dc_helper.c:329:10: warning: no previous prototype for ‘generic_reg_get4’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dc_helper.c:343:10: warning: no previous prototype for ‘generic_reg_get5’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dc_helper.c:359:10: warning: no previous prototype for ‘generic_reg_get6’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dc_helper.c:377:10: warning: no previous prototype for ‘generic_reg_get7’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dc_helper.c:397:10: warning: no previous prototype for ‘generic_reg_get8’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dc_helper.c:503:6: warning: no previous prototype for ‘generic_write_indirect_reg’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dc_helper.c:511:10: warning: no previous prototype for ‘generic_read_indirect_reg’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dc_helper.c:529:10: warning: no previous prototype for ‘generic_indirect_reg_get’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dc_helper.c:560:10: warning: no previous prototype for ‘generic_indirect_reg_update_ex’ [-Wmissing-prototypes]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Noah Abradjian <noah.abradjian@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c:2753: warning: Function parameter or member 'vbios' not described in 'is_display_configuration_supported'
drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c:2753: warning: Function parameter or member 'calcs_output' not described in 'is_display_configuration_supported'
drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c:3030: warning: Function parameter or member 'ctx' not described in 'bw_calcs'
drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c:3030: warning: Function parameter or member 'dceip' not described in 'bw_calcs'
drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c:3030: warning: Function parameter or member 'vbios' not described in 'bw_calcs'
drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c:3030: warning: Function parameter or member 'pipe' not described in 'bw_calcs'
drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c:3030: warning: Function parameter or member 'pipe_count' not described in 'bw_calcs'
drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c:3030: warning: Function parameter or member 'calcs_output' not described in 'bw_calcs'
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c: In function ‘calculate_bandwidth’:
drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c:109:18: warning: variable ‘v_filter_init_mode’ set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c: In function ‘bw_calcs’:
drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c:3031:21: warning: variable ‘sclk_lvl’ set but not used [-Wunused-but-set-variable]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Find out when we try to disable CRC calculation, crc generation is still
enabled. Main reason is that dc_stream_configure_crc() will never get
called when the source is AMDGPU_DM_PIPE_CRC_SOURCE_NONE.
[How]
Add checking condition that when source is
AMDGPU_DM_PIPE_CRC_SOURCE_NONE, we should also call
dc_stream_configure_crc() to disable crc calculation.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit c920888c60.
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Roman Li <Roman.Li@amd.com>
Cc: Bindu R <Bindu.R@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 6ae09fa491.
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Roman Li <Roman.Li@amd.com>
Cc: Bindu R <Bindu.R@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit f01afd1ee4.
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Roman Li <Roman.Li@amd.com>
Cc: Bindu R <Bindu.R@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c:253: warning: Function parameter or member 'pStream' not described in 'dc_optimize_timing_for_fsft'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c:253: warning: Function parameter or member 'max_input_rate_in_khz' not described in 'dc_optimize_timing_for_fsft'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c:270: warning: Function parameter or member 'stream' not described in 'dc_stream_set_cursor_attributes'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c:270: warning: Function parameter or member 'attributes' not described in 'dc_stream_set_cursor_attributes'
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_surface.c:119: warning: Cannot understand *****************************************************************************
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Josip Pavic <Josip.Pavic@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:522:17: warning: no previous prototype for ‘dce60_aux_engine_create’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:560:20: warning: no previous prototype for ‘dce60_i2c_hw_create’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:576:20: warning: no previous prototype for ‘dce60_i2c_sw_create’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:710:22: warning: no previous prototype for ‘dce60_link_encoder_create’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:749:22: warning: no previous prototype for ‘dce60_clock_source_create’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:773:6: warning: no previous prototype for ‘dce60_clock_source_destroy’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:863:6: warning: no previous prototype for ‘dce60_validate_bandwidth’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:908:16: warning: no previous prototype for ‘dce60_validate_global’ [-Wmissing-prototypes]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Mauro Rossi <issor.oruam@gmail.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
In file included from drivers/gpu/drm/amd/amdgpu/../display/dc/dce100/dce100_resource.c:54:
drivers/gpu/drm/amd/amdgpu/../display/dc/dce100/dce100_resource.c:614:22: warning: no previous prototype for ‘dce100_link_encoder_create’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce100/dce100_resource.c:653:32: warning: no previous prototype for ‘dce100_opp_create’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce100/dce100_resource.c:668:17: warning: no previous prototype for ‘dce100_aux_engine_create’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce100/dce100_resource.c:706:20: warning: no previous prototype for ‘dce100_i2c_hw_create’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce100/dce100_resource.c:721:22: warning: no previous prototype for ‘dce100_clock_source_create’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce100/dce100_resource.c:745:6: warning: no previous prototype for ‘dce100_clock_source_destroy’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce100/dce100_resource.c:834:6: warning: no previous prototype for ‘dce100_validate_bandwidth’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce100/dce100_resource.c:879:16: warning: no previous prototype for ‘dce100_validate_global’ [-Wmissing-prototypes]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Anthony Koo <Anthony.Koo@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_timing_generator.c:192:6: warning: no previous prototype for ‘dce60_configure_crc’ [-Wmissing-prototypes]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Mauro Rossi <issor.oruam@gmail.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_transform_v.c:228: warning: bad line: void
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_transform_v.c:233: warning: Function parameter or member 'xfm_dce' not described in 'program_overscan'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_transform_v.c:233: warning: Function parameter or member 'data' not described in 'program_overscan'
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:262:15: warning: initialized field overwritten [-Woverride-init]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:266:2: note: in expansion of macro ‘stream_enc_regs’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:262:15: note: (near initialization for ‘stream_enc_regs[0].TMDS_CNTL’)
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:266:2: note: in expansion of macro ‘stream_enc_regs’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:262:15: warning: initialized field overwritten [-Woverride-init]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:267:2: note: in expansion of macro ‘stream_enc_regs’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:262:15: note: (near initialization for ‘stream_enc_regs[1].TMDS_CNTL’)
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:267:2: note: in expansion of macro ‘stream_enc_regs’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:262:15: warning: initialized field overwritten [-Woverride-init]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:268:2: note: in expansion of macro ‘stream_enc_regs’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:262:15: note: (near initialization for ‘stream_enc_regs[2].TMDS_CNTL’)
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:268:2: note: in expansion of macro ‘stream_enc_regs’
In file included from drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:66:
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:272:3: note: in expansion of macro ‘SE_COMMON_MASK_SH_LIST_DCE110’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:272:3: note: in expansion of macro ‘SE_COMMON_MASK_SH_LIST_DCE110’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:272:3: note: in expansion of macro ‘SE_COMMON_MASK_SH_LIST_DCE110’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:272:3: note: in expansion of macro ‘SE_COMMON_MASK_SH_LIST_DCE110’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:276:3: note: in expansion of macro ‘SE_COMMON_MASK_SH_LIST_DCE110’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:276:3: note: in expansion of macro ‘SE_COMMON_MASK_SH_LIST_DCE110’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:276:3: note: in expansion of macro ‘SE_COMMON_MASK_SH_LIST_DCE110’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:276:3: note: in expansion of macro ‘SE_COMMON_MASK_SH_LIST_DCE110’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:553:3: note: in expansion of macro ‘HWSEQ_DCE11_MASK_SH_LIST’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:553:3: note: in expansion of macro ‘HWSEQ_DCE11_MASK_SH_LIST’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:553:3: note: in expansion of macro ‘HWSEQ_DCE11_MASK_SH_LIST’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:553:3: note: in expansion of macro ‘HWSEQ_DCE11_MASK_SH_LIST’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:557:3: note: in expansion of macro ‘HWSEQ_DCE11_MASK_SH_LIST’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:557:3: note: in expansion of macro ‘HWSEQ_DCE11_MASK_SH_LIST’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:557:3: note: in expansion of macro ‘HWSEQ_DCE11_MASK_SH_LIST’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:557:3: note: in expansion of macro ‘HWSEQ_DCE11_MASK_SH_LIST’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:594:3: note: in expansion of macro ‘MI_DCE11_MASK_SH_LIST’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:594:3: note: in expansion of macro ‘MI_DCE11_MASK_SH_LIST’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:599:3: note: in expansion of macro ‘MI_DCE11_MASK_SH_LIST’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:599:3: note: in expansion of macro ‘MI_DCE11_MASK_SH_LIST’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:718:17: warning: no previous prototype for ‘dce110_aux_engine_create’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:756:20: warning: no previous prototype for ‘dce110_i2c_hw_create’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:771:22: warning: no previous prototype for ‘dce110_clock_source_create’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:795:6: warning: no previous prototype for ‘dce110_clock_source_destroy’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:1037:16: warning: no previous prototype for ‘dce110_validate_plane’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:1092:16: warning: no previous prototype for ‘dce110_validate_global’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:1336:29: warning: no previous prototype for ‘dce110_resource_cap’ [-Wmissing-prototypes]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Anthony Koo <Anthony.Koo@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
In file included from drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:66:
drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_11_0_sh_mask.h:5936:51: warning: initialized field overwritten [-Woverride-init]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_stream_encoder.h:116:16: note: in expansion of macro ‘DIG_FE_CNTL__DIG_STEREOSYNC_SELECT__SHIFT’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_stream_encoder.h:306:2: note: in expansion of macro ‘SE_SF’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:272:3: note: in expansion of macro ‘SE_COMMON_MASK_SH_LIST_DCE110’
drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_11_0_sh_mask.h:5936:51: note: (near initialization for ‘se_shift.DIG_STEREOSYNC_SELECT’)
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_stream_encoder.h:116:16: note: in expansion of macro ‘DIG_FE_CNTL__DIG_STEREOSYNC_SELECT__SHIFT’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_stream_encoder.h:306:2: note: in expansion of macro ‘SE_SF’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:272:3: note: in expansion of macro ‘SE_COMMON_MASK_SH_LIST_DCE110’
drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_11_0_sh_mask.h:5938:52: warning: initialized field overwritten [-Woverride-init]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_stream_encoder.h:116:16: note: in expansion of macro ‘DIG_FE_CNTL__DIG_STEREOSYNC_GATE_EN__SHIFT’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_stream_encoder.h:307:2: note: in expansion of macro ‘SE_SF’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:272:3: note: in expansion of macro ‘SE_COMMON_MASK_SH_LIST_DCE110’
drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_11_0_sh_mask.h:5938:52: note: (near initialization for ‘se_shift.DIG_STEREOSYNC_GATE_EN’)
NB: Snipped for brevity
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_mem_input_v.c:1034:6: warning: no previous prototype for ‘dce110_mem_input_v_construct’ [-Wmissing-prototypes]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator_v.c:54: warning: Function parameter or member 'tg' not described in 'dce110_timing_generator_v_enable_crtc'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator_v.c:216: warning: Function parameter or member 'tg' not described in 'dce110_timing_generator_v_wait_for_vactive'
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:620:22: warning: no previous prototype for ‘dce112_link_encoder_create’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:674:32: warning: no previous prototype for ‘dce112_opp_create’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:689:17: warning: no previous prototype for ‘dce112_aux_engine_create’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:727:20: warning: no previous prototype for ‘dce112_i2c_hw_create’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:742:22: warning: no previous prototype for ‘dce112_clock_source_create’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:766:6: warning: no previous prototype for ‘dce112_clock_source_destroy’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:1027:16: warning: no previous prototype for ‘dce112_validate_global’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:1205:29: warning: no previous prototype for ‘dce112_resource_cap’ [-Wmissing-prototypes]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Anthony Koo <Anthony.Koo@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_compressor.c:429:14: warning: no previous prototype for ‘controller_id_to_index’ [-Wmissing-prototypes]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:79: warning: Cannot understand *****************************************************************************
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:124: warning: Function parameter or member 'tg' not described in 'dce110_timing_generator_enable_crtc'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:179: warning: Cannot understand *****************************************************************************
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:233: warning: Function parameter or member 'tg' not described in 'dce110_timing_generator_disable_crtc'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:258: warning: Function parameter or member 'tg' not described in 'program_horz_count_by_2'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:258: warning: Function parameter or member 'timing' not described in 'program_horz_count_by_2'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:284: warning: Function parameter or member 'tg' not described in 'dce110_timing_generator_program_timing_generator'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:284: warning: Function parameter or member 'dc_crtc_timing' not described in 'dce110_timing_generator_program_timing_generator'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:356: warning: Cannot understand *****************************************************************************
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:525: warning: Cannot understand *****************************************************************************
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:561: warning: Cannot understand *****************************************************************************
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:1118: warning: Function parameter or member 'tg' not described in 'dce110_timing_generator_validate_timing'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:1118: warning: Function parameter or member 'timing' not described in 'dce110_timing_generator_validate_timing'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:1118: warning: Function parameter or member 'signal' not described in 'dce110_timing_generator_validate_timing'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:1174: warning: Function parameter or member 'tg' not described in 'dce110_timing_generator_wait_for_vblank'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:1198: warning: Function parameter or member 'tg' not described in 'dce110_timing_generator_wait_for_vactive'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:1208: warning: Cannot understand *****************************************************************************
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:1386: warning: Cannot understand *****************************************************************************
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:1768: warning: Cannot understand *****************************************************************************
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:1801: warning: Function parameter or member 'tg' not described in 'dce110_timing_generator_disable_vga'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:1851: warning: Function parameter or member 'tg' not described in 'dce110_timing_generator_set_overscan_color_black'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:1851: warning: Function parameter or member 'color' not described in 'dce110_timing_generator_set_overscan_color_black'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:1851: warning: Excess function parameter 'param' description in 'dce110_timing_generator_set_overscan_color_black'
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Anthony Koo <Anthony.Koo@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_timing_generator.c:602:13: warning: ‘dce120_timing_generator_get_position’ defined but not used [-Wunused-function]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_mem_input_v.c:471:6: warning: no previous prototype for ‘dce_mem_input_v_is_surface_pending’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_mem_input_v.c:486:6: warning: no previous prototype for ‘dce_mem_input_v_program_surface_flip_and_addr’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_mem_input_v.c:563:6: warning: no previous prototype for ‘dce_mem_input_v_program_pte_vm’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_mem_input_v.c:636:6: warning: no previous prototype for ‘dce_mem_input_v_program_surface_config’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_mem_input_v.c:922:6: warning: no previous prototype for ‘dce_mem_input_v_program_display_marks’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_mem_input_v.c:945:6: warning: no previous prototype for ‘dce_mem_input_program_chroma_display_marks’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_mem_input_v.c:966:6: warning: no previous prototype for ‘dce110_allocate_mem_input_v’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_mem_input_v.c:1008:6: warning: no previous prototype for ‘dce110_free_mem_input_v’ [-Wmissing-prototypes]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_hw_sequencer.c:1639: warning: Function parameter or member 'dc' not described in 'dce110_enable_accelerated_mode'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_hw_sequencer.c:1639: warning: Function parameter or member 'context' not described in 'dce110_enable_accelerated_mode'
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_compressor.c:415:6: warning: no previous prototype for ‘dce110_get_required_compressed_surfacesize’ [-Wmissing-prototypes]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c: In function ‘dce110_timing_generator_tear_down_global_swap_lock’:
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:1354:12: warning: variable ‘value_crtc_vtotal’ set but not used [-Wunused-but-set-variable]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Aric Cyr <Aric.Cyr@amd.com>
Cc: Anthony Koo <Anthony.Koo@amd.com>
Cc: Tony Cheng <Tony.Cheng@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
In file included from drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:59:
drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_11_2_sh_mask.h:10480:62: warning: initialized field overwritten [-Woverride-init]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_opp.h:96:16: note: in expansion of macro ‘FMT_BIT_DEPTH_CONTROL__FMT_TEMPORAL_DITHER_EN__SHIFT’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_opp.h:114:2: note: in expansion of macro ‘OPP_SF’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_opp.h:148:2: note: in expansion of macro ‘OPP_COMMON_MASK_SH_LIST_DCE_COMMON_BASE’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:321:2: note: in expansion of macro ‘OPP_COMMON_MASK_SH_LIST_DCE_112’
drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_11_2_sh_mask.h:10480:62: note: (near initialization for ‘opp_shift.FMT_TEMPORAL_DITHER_EN’)
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_opp.h:96:16: note: in expansion of macro ‘FMT_BIT_DEPTH_CONTROL__FMT_TEMPORAL_DITHER_EN__SHIFT’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_opp.h:114:2: note: in expansion of macro ‘OPP_SF’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_opp.h:148:2: note: in expansion of macro ‘OPP_COMMON_MASK_SH_LIST_DCE_COMMON_BASE’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:321:2: note: in expansion of macro ‘OPP_COMMON_MASK_SH_LIST_DCE_112’
drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_11_2_sh_mask.h:10479:60: warning: initialized field overwritten [-Woverride-init]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_opp.h:96:16: note: in expansion of macro ‘FMT_BIT_DEPTH_CONTROL__FMT_TEMPORAL_DITHER_EN_MASK’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_opp.h:114:2: note: in expansion of macro ‘OPP_SF’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_opp.h:148:2: note: in expansion of macro ‘OPP_COMMON_MASK_SH_LIST_DCE_COMMON_BASE’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:325:2: note: in expansion of macro ‘OPP_COMMON_MASK_SH_LIST_DCE_112’
drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_11_2_sh_mask.h:10479:60: note: (near initialization for ‘opp_mask.FMT_TEMPORAL_DITHER_EN’)
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_opp.h:96:16: note: in expansion of macro ‘FMT_BIT_DEPTH_CONTROL__FMT_TEMPORAL_DITHER_EN_MASK’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_opp.h:114:2: note: in expansion of macro ‘OPP_SF’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_opp.h:148:2: note: in expansion of macro ‘OPP_COMMON_MASK_SH_LIST_DCE_COMMON_BASE’
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Mauro Rossi <issor.oruam@gmail.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This file uses a complex abstracted set of hierarchical macros to
setup its applicable register lists within constant structures.
However in the case of TMDS_CNTL we wish to mark it as not applicable
for this use-case.
One method would be to de-const all of the definitions and users, then
manually zero out TMDS_CNTL from the list. Another would be to create
a new set of hierarchical macros to omit TMDS_CNTL entirely. Both
would entail a great deal of unnecessary changes and maintenance
burden.
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:286:15: warning: initialized field overwritten [-Woverride-init]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:290:2: note: in expansion of macro ‘stream_enc_regs’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:286:15: note: (near initialization for ‘stream_enc_regs[0].TMDS_CNTL’)
drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:290:2: note: in expansion of macro ‘stream_enc_regs’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:286:15: warning: initialized field overwritten [-Woverride-init]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:291:2: note: in expansion of macro ‘stream_enc_regs’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:286:15: note: (near initialization for ‘stream_enc_regs[1].TMDS_CNTL’)
drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:291:2: note: in expansion of macro ‘stream_enc_regs’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:286:15: warning: initialized field overwritten [-Woverride-init]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:292:2: note: in expansion of macro ‘stream_enc_regs’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:286:15: note: (near initialization for ‘stream_enc_regs[2].TMDS_CNTL’)
drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:292:2: note: in expansion of macro ‘stream_enc_regs’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:286:15: warning: initialized field overwritten [-Woverride-init]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:293:2: note: in expansion of macro ‘stream_enc_regs’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:286:15: note: (near initialization for ‘stream_enc_regs[3].TMDS_CNTL’)
drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:293:2: note: in expansion of macro ‘stream_enc_regs’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:286:15: warning: initialized field overwritten [-Woverride-init]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:294:2: note: in expansion of macro ‘stream_enc_regs’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:286:15: note: (near initialization for ‘stream_enc_regs[4].TMDS_CNTL’)
drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:294:2: note: in expansion of macro ‘stream_enc_regs’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:286:15: warning: initialized field overwritten [-Woverride-init]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:295:2: note: in expansion of macro ‘stream_enc_regs’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:286:15: note: (near initialization for ‘stream_enc_regs[5].TMDS_CNTL’)
drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:295:2: note: in expansion of macro ‘stream_enc_regs’
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
In file included from drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:59:
drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_11_2_sh_mask.h:10014:58: warning: initialized field overwritten [-Woverride-init]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.h:214:16: note: in expansion of macro ‘AUX_SW_DATA__AUX_SW_AUTOINCREMENT_DISABLE__SHIFT’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.h:127:2: note: in expansion of macro ‘AUX_SF’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:177:2: note: in expansion of macro ‘DCE_AUX_MASK_SH_LIST’
drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_11_2_sh_mask.h:10014:58: note: (near initialization for ‘aux_shift.AUX_SW_AUTOINCREMENT_DISABLE’)
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.h:214:16: note: in expansion of macro ‘AUX_SW_DATA__AUX_SW_AUTOINCREMENT_DISABLE__SHIFT’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.h:127:2: note: in expansion of macro ‘AUX_SF’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:177:2: note: in expansion of macro ‘DCE_AUX_MASK_SH_LIST’
drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_11_2_sh_mask.h:10013:56: warning: initialized field overwritten [-Woverride-init]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.h:214:16: note: in expansion of macro ‘AUX_SW_DATA__AUX_SW_AUTOINCREMENT_DISABLE_MASK’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.h:127:2: note: in expansion of macro ‘AUX_SF’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:181:2: note: in expansion of macro ‘DCE_AUX_MASK_SH_LIST’
drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_11_2_sh_mask.h:10013:56: note: (near initialization for ‘aux_mask.AUX_SW_AUTOINCREMENT_DISABLE’)
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.h:214:16: note: in expansion of macro ‘AUX_SW_DATA__AUX_SW_AUTOINCREMENT_DISABLE_MASK’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.h:127:2: note: in expansion of macro ‘AUX_SF’
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_timing_generator.c:602:13: warning: ‘dce120_timing_generator_get_position’ defined but not used [-Wunused-function]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_timing_generator.c:73: warning: Cannot understand *****************************************************************************
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_timing_generator.c:593: warning: Cannot understand *****************************************************************************
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_resource.c:426:32: warning: no previous prototype for ‘dce120_opp_create’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_resource.c:440:17: warning: no previous prototype for ‘dce120_aux_engine_create’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_resource.c:478:20: warning: no previous prototype for ‘dce120_i2c_hw_create’ [-Wmissing-prototypes]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Anthony Koo <Anthony.Koo@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This file uses a complex abstracted set of hierarchical macros to
setup its applicable register lists within constant structures.
However in the case of TMDS_CNTL we wish to mark it as not applicable
for this use-case.
One method would be to de-const all of the definitions and users, then
manually zero out TMDS_CNTL from the list. Another would be to create
a new set of hierarchical macros to omit TMDS_CNTL entirely. Both
would entail a great deal of unnecessary changes and maintenance
burden.
Instead, let's just silence the warning.
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_resource.c:277:15: warning: initialized field overwritten [-Woverride-init]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_resource.c:281:2: note: in expansion of macro ‘stream_enc_regs’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_resource.c:277:15: note: (near initialization for ‘stream_enc_regs[0].TMDS_CNTL’)
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_resource.c:281:2: note: in expansion of macro ‘stream_enc_regs’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_resource.c:277:15: warning: initialized field overwritten [-Woverride-init]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_resource.c:282:2: note: in expansion of macro ‘stream_enc_regs’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_resource.c:277:15: note: (near initialization for ‘stream_enc_regs[1].TMDS_CNTL’)
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_resource.c:282:2: note: in expansion of macro ‘stream_enc_regs’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_resource.c:277:15: warning: initialized field overwritten [-Woverride-init]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_resource.c:283:2: note: in expansion of macro ‘stream_enc_regs’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_resource.c:277:15: note: (near initialization for ‘stream_enc_regs[2].TMDS_CNTL’)
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_resource.c:283:2: note: in expansion of macro ‘stream_enc_regs’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_resource.c:277:15: warning: initialized field overwritten [-Woverride-init]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_resource.c:284:2: note: in expansion of macro ‘stream_enc_regs’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_resource.c:277:15: note: (near initialization for ‘stream_enc_regs[3].TMDS_CNTL’)
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_resource.c:284:2: note: in expansion of macro ‘stream_enc_regs’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_resource.c:277:15: warning: initialized field overwritten [-Woverride-init]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_resource.c:285:2: note: in expansion of macro ‘stream_enc_regs’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_resource.c:277:15: note: (near initialization for ‘stream_enc_regs[4].TMDS_CNTL’)
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_resource.c:285:2: note: in expansion of macro ‘stream_enc_regs’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_resource.c:277:15: warning: initialized field overwritten [-Woverride-init]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_resource.c:286:2: note: in expansion of macro ‘stream_enc_regs’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_resource.c:277:15: note: (near initialization for ‘stream_enc_regs[5].TMDS_CNTL’)
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_resource.c:286:2: note: in expansion of macro ‘stream_enc_regs’
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_timing_generator.c:101:6: warning: no previous prototype for ‘dce120_timing_generator_validate_timing’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_timing_generator.c:128:6: warning: no previous prototype for ‘dce120_tg_validate_timing’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_timing_generator.c:136:6: warning: no previous prototype for ‘dce120_timing_generator_enable_crtc’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_timing_generator.c:156:6: warning: no previous prototype for ‘dce120_timing_generator_set_early_control’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_timing_generator.c:169:10: warning: no previous prototype for ‘dce120_timing_generator_get_vblank_counter’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_timing_generator.c:184:6: warning: no previous prototype for ‘dce120_timing_generator_get_crtc_position’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_timing_generator.c:210:6: warning: no previous prototype for ‘dce120_timing_generator_wait_for_vblank’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_timing_generator.c:232:6: warning: no previous prototype for ‘dce120_timing_generator_wait_for_vactive’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_timing_generator.c:245:6: warning: no previous prototype for ‘dce120_timing_generator_setup_global_swap_lock’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_timing_generator.c:282:6: warning: no previous prototype for ‘dce120_timing_generator_tear_down_global_swap_lock’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_timing_generator.c:303:6: warning: no previous prototype for ‘dce120_timing_generator_enable_reset_trigger’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_timing_generator.c:350:6: warning: no previous prototype for ‘dce120_timing_generator_disable_reset_trigger’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_timing_generator.c:370:6: warning: no previous prototype for ‘dce120_timing_generator_did_triggered_reset_occur’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_timing_generator.c:387:6: warning: no previous prototype for ‘dce120_timing_generator_disable_vga’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_timing_generator.c:428:6: warning: no previous prototype for ‘dce120_timing_generator_program_blanking’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_timing_generator.c:488:6: warning: no previous prototype for ‘dce120_timing_generator_program_blank_color’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_timing_generator.c:501:6: warning: no previous prototype for ‘dce120_timing_generator_set_overscan_color_black’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_timing_generator.c:543:6: warning: no previous prototype for ‘dce120_timing_generator_set_drr’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_timing_generator.c:602:6: warning: no previous prototype for ‘dce120_timing_generator_get_position’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_timing_generator.c:635:6: warning: no previous prototype for ‘dce120_timing_generator_get_crtc_scanoutpos’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_timing_generator.c:664:6: warning: no previous prototype for ‘dce120_timing_generator_enable_advanced_request’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_timing_generator.c:702:6: warning: no previous prototype for ‘dce120_tg_program_blank_color’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_timing_generator.c:725:6: warning: no previous prototype for ‘dce120_tg_set_overscan_color’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_timing_generator.c:752:6: warning: no previous prototype for ‘dce120_tg_is_blanked’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_timing_generator.c:773:6: warning: no previous prototype for ‘dce120_tg_set_blank’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_timing_generator.c:792:6: warning: no previous prototype for ‘dce120_tg_wait_for_state’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_timing_generator.c:809:6: warning: no previous prototype for ‘dce120_tg_set_colors’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_timing_generator.c:836:6: warning: no previous prototype for ‘dce120_timing_generator_set_test_pattern’ [-Wmissing-prototypes]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Aric Cyr <aric.cyr@amd.com>
Cc: Anthony Koo <Anthony.Koo@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ideally someone should strip-out all these garbage 'if 0's.
Tempted to carry out the work myself on principle!
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_hw_sequencer.c:53:47: warning: ‘reg_offsets’ defined but not used [-Wunused-const-variable=]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/gpio/diagnostics/hw_factory_diag.c:50:6: warning: no previous prototype for ‘dal_hw_factory_diag_fpga_init’ [-Wmissing-prototypes]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/gpio/diagnostics/hw_factory_diag.h:30:43: warning: ‘struct hw_factory’ declared inside parameter list will not be visible outside of this definition or declaration
drivers/gpu/drm/amd/amdgpu/../display/dc/gpio/diagnostics/hw_factory_diag.h:30:6: note: previous declaration of ‘dal_hw_factory_diag_fpga_init’ was here
drivers/gpu/drm/amd/amdgpu/../display/dc/gpio/diagnostics/hw_factory_diag.h:30:43: warning: ‘struct hw_factory’ declared inside parameter list will not be visible outside of this definition or declaration
drivers/gpu/drm/amd/amdgpu/../display/dc/gpio/diagnostics/hw_factory_diag.h:30:6: note: previous declaration of ‘dal_hw_factory_diag_fpga_init’ was here
drivers/gpu/drm/amd/amdgpu/../display/dc/gpio/diagnostics/hw_factory_diag.h:30:43: warning: ‘struct hw_factory’ declared inside parameter list will not be visible outside of this definition or declaration
drivers/gpu/drm/amd/amdgpu/../display/dc/gpio/diagnostics/hw_factory_diag.h:30:6: note: previous declaration of ‘dal_hw_factory_diag_fpga_init’ was here
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/irq_service.c:82:31: warning: no previous prototype for ‘find_irq_source_info’ [-Wmissing-prototypes]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Mauro Rossi <issor.oruam@gmail.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/gpio/diagnostics/hw_translate_diag.c:37:6: warning: no previous prototype for ‘dal_hw_translate_diag_fpga_init’ [-Wmissing-prototypes]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The header doesn't provide any additional parameter descriptions.
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_transform.c:1104: warning: Cannot understand *****************************************************************************
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Mauro Rossi <issor.oruam@gmail.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_opp.c:109: warning: Function parameter or member 'opp110' not described in 'set_truncation'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_opp.c:109: warning: Function parameter or member 'params' not described in 'set_truncation'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_opp.c:154: warning: Function parameter or member 'opp110' not described in 'dce60_set_truncation'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_opp.c:154: warning: Function parameter or member 'params' not described in 'dce60_set_truncation'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_opp.c:204: warning: Function parameter or member 'opp110' not described in 'set_spatial_dither'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_opp.c:204: warning: Function parameter or member 'params' not described in 'set_spatial_dither'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_opp.c:308: warning: Function parameter or member 'opp110' not described in 'set_temporal_dither'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_opp.c:308: warning: Function parameter or member 'params' not described in 'set_temporal_dither'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_opp.c:370: warning: Function parameter or member 'opp110' not described in 'dce110_opp_set_clamping'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_opp.c:370: warning: Function parameter or member 'params' not described in 'dce110_opp_set_clamping'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_opp.c:430: warning: Function parameter or member 'opp110' not described in 'dce60_opp_set_clamping'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_opp.c:430: warning: Function parameter or member 'params' not described in 'dce60_opp_set_clamping'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_opp.c:478: warning: Function parameter or member 'opp110' not described in 'set_pixel_encoding'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_opp.c:478: warning: Function parameter or member 'params' not described in 'set_pixel_encoding'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_opp.c:514: warning: Function parameter or member 'opp110' not described in 'dce60_set_pixel_encoding'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_opp.c:514: warning: Function parameter or member 'params' not described in 'dce60_set_pixel_encoding'
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Mauro Rossi <issor.oruam@gmail.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/gpio/hw_ddc.c: In function ‘set_config’:
drivers/gpu/drm/amd/amdgpu/../display/dc/gpio/hw_ddc.c:110:13: warning: variable ‘reg2’ set but not used [-Wunused-but-set-variable]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_link_encoder.c: In function ‘dce110_link_encoder_update_mst_stream_allocation_table’:
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_link_encoder.c:1506:11: warning: variable ‘value0’ set but not used [-Wunused-but-set-variable]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Mauro Rossi <issor.oruam@gmail.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c: In function ‘dce_aux_transfer_raw’:
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c:579:7: warning: variable ‘bytes_replied’ set but not used [-Wunused-but-set-variable]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
during idle optimizations we acquire the dc_lock, this lock is also
acquired during gpu_reset so we end up hanging the system due to a
deadlock
[How]
If we are in gpu reset:
- disable idle optimizations and skip calls to the dc function
v2: skip idle optimizations calls
v3: add guard for DCN
Fixes: 71338cb4a7 ("drm/amd/display: enable idle optimizations for linux (MALL stutter)")
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
commit a861736dae ("drm/amd/display: Fixed Intermittent blue screen on OLED panel")
causes power regression for many users. It seems that this change causes
the MCLK to get forced high; this creates a regression for many users
since their devices were not able to drop to a low state after this
change. For this reason, this reverts commit
a861736dae.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1407
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Naveed Ashfaq <Naveed.Ashfaq@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Roman Li <roman.li@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
driver has sent PMFW VBIOSSMC_MSG_SetDisplayIdleOptimizations while SMU
still processing a previous VBIOSSMC_MSG_SetHardMinDcfclkByFreq message.
[how]
same as RN, change the time out to2s.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The initial purpose of dcn10 pipe split is to support some high
bandwidth mode which requires dispclk greater than max dispclk. By
initial bring up power measurement data, it showed power consumption is
less with pipe split for dcn block. This could be reason for enable pipe
split by default. By battery life measurement of some Chromebooks,
result shows battery life is longer with pipe split disabled.
[How]
Disable pipe split by default. Pipe split could be still enabled when
required dispclk is greater than max dispclk.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Required for DSC MST
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Zhan Liu <Zhan.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Reverts "drm/amd/display: Revert HUBP blank behaviour for now"
- Hubp blank will fail if the pipe is locked (this is the case on
linux), so add a check to make sure pipe isn't locked, if it is then
defer the blank to post_unlock.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
DCN30 has a bug where blanking HUBP blocks pstate allow unless
HUBP_DISABLE is toggled afterwards.
[HOW]
Create a HW sequence for blanking HUBP.
1. Wait for enter VBLANK
2. Set HUBP_BLANK
3. Make sure HUBP_IN_BLANK = 1
4. Toggle HUBP_DISABLE on and off to perform soft reset
All existing calls to hubp->funcs->set_blank should be replaced with
this new sequence.
In wait_for_mpcc_disconnect, only blank the pipe being disconnected, and
leave all other pipes unmodified.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
A call to BREAK_TO_DEBUGGER is triggered when powering down memory
[How]
Remove the check for GAMCOR_MEM_PWR_STATE when powering off the memory
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Jacky Liao <ziyu.liao@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Seamless boot stream has hw resource assigned, already. 'add' is
actually rebuild the assignment.
[How]
Swap seamless boot stream to pipe 0 (if needed) to ensure pipe_ctx
matches
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Raymond Yang <rayyang@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
When OS reboots, and panel is turned off, T12 may not be maintained.
T12 is defined as the interval between VDDC off (occurs at shutdown) and
the next VDDC on (occurs when eDP is POST-ed)
[how]
DC already tracks panel power off time. Add a DC interface which DM can
call during shutdown. Ideally this should be as late as possible during
the shutdown sequence so the extra delay is minimal.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Jun Lei <jun.lei@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
1. the corrected timing to write DPCD 300h AMD signature is before
link training.
2. and VBIOS will writes correctted AMD signature by after AGESA 1.0.0,
so driver doesn't need to write DPCD 300h again to switch config.
3. there are some OLED panel will clean backlight level to 0 once
receive DPCD 300h, so we will see flicker issue at that time.
[How]
read DPCD 300h signature before write it to avoid reprogram again, if
AMD signature was writed corrected by VBIOS, driver will not reprogram
it again.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Yu-ting Shen <Yu-ting.Shen@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When switching single pipe to split pipe, the bandwidth check is just
for first pipe. The 2nd pipe with abnormal(or zero) dpp clock when pipe
ready and unlock leads the garbage on display.
[How]
Removed external increasing dpp clock check, the internal function
already loops all of pipes to check whether update dpp clock.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Chiawen Huang <chiawen.huang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
We want to make enabling test pattern a part of the stream update code
path. This change is the first step towards that goal.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
DCN10 uses plane visibility to determine when to unblank HUBP; there is
no reason DCN20+ should not do the same.
[HOW]
In addition to changing the check in HWSEQ, we must change
is_pipe_tree_visible so that it checks ODM pipe topologies as well as
MPC. Since we're now checking both ODM and MPC topologies, the helper
function names have been changed to reference "parent" and "child"
instead of "top" and "bottom".
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Driver apply the monitor patch into global debug flag. When apply
monitor patch, fec feature will always disable.
[How]
Separate fec debug flag and monitor patch
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Lewis Huang <Lewis.Huang@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
The stack variable "val" is potentially unpopulate it, so initialize it
with the value 0xf (indicating an invalid mux)
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In dc_link_dp_set_test_pattern, we assume all pipes have a stream, which
can cause null pointer dereference.
[How]
Add a null pointer check before accessing stream.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/gpio/hw_factory.c:123:6: warning: no previous prototype for ‘dal_hw_factory_destroy’ [-Wmissing-prototypes]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_psr.c:38: warning: Function parameter or member 'raw_state' not described in 'convert_psr_state'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_psr.c:81: warning: Function parameter or member 'dmub' not described in 'dmub_psr_get_state'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_psr.c:81: warning: Function parameter or member 'state' not described in 'dmub_psr_get_state'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_psr.c:97: warning: Function parameter or member 'dmub' not described in 'dmub_psr_set_version'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_psr.c:97: warning: Function parameter or member 'stream' not described in 'dmub_psr_set_version'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_psr.c:128: warning: Function parameter or member 'dmub' not described in 'dmub_psr_enable'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_psr.c:128: warning: Function parameter or member 'enable' not described in 'dmub_psr_enable'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_psr.c:128: warning: Function parameter or member 'wait' not described in 'dmub_psr_enable'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_psr.c:177: warning: Function parameter or member 'dmub' not described in 'dmub_psr_set_level'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_psr.c:177: warning: Function parameter or member 'psr_level' not described in 'dmub_psr_set_level'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_psr.c:203: warning: Function parameter or member 'dmub' not described in 'dmub_psr_copy_settings'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_psr.c:203: warning: Function parameter or member 'link' not described in 'dmub_psr_copy_settings'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_psr.c:203: warning: Function parameter or member 'psr_context' not described in 'dmub_psr_copy_settings'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_psr.c:284: warning: Function parameter or member 'dmub' not described in 'dmub_psr_force_static'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_psr.c:301: warning: Function parameter or member 'dmub' not described in 'dmub_psr_get_residency'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_psr.c:301: warning: Function parameter or member 'residency' not described in 'dmub_psr_get_residency'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_psr.c:323: warning: Function parameter or member 'psr' not described in 'dmub_psr_construct'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_psr.c:323: warning: Function parameter or member 'ctx' not described in 'dmub_psr_construct'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_psr.c:332: warning: Function parameter or member 'ctx' not described in 'dmub_psr_create'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_psr.c:349: warning: Function parameter or member 'dmub' not described in 'dmub_psr_destroy'
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Wyatt Wood <wyatt.wood@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_panel_cntl.c: In function ‘dce_get_16_bit_backlight_from_pwm’:
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_panel_cntl.c:54:11: warning: variable ‘bl_pwm_cntl’ set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_panel_cntl.c:53:11: warning: variable ‘pwm_period_cntl’ set but not used [-Wunused-but-set-variable]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Anthony Koo <Anthony.Koo@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_i2c_sw.c:342:6: warning: no previous prototype for ‘dce_i2c_sw_engine_set_speed’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_i2c_sw.c:356:6: warning: no previous prototype for ‘dce_i2c_sw_engine_acquire_engine’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_i2c_sw.c:400:6: warning: no previous prototype for ‘dce_i2c_sw_engine_submit_channel_request’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_i2c_sw.c:443:6: warning: no previous prototype for ‘dce_i2c_sw_engine_submit_payload’ [-Wmissing-prototypes]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_i2c_hw.c:438:35: warning: no previous prototype for ‘dce_i2c_hw_engine_wait_on_operation_result’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_i2c_hw.c:505:6: warning: no previous prototype for ‘dce_i2c_hw_engine_submit_payload’ [-Wmissing-prototypes]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Lewis Huang <Lewis.Huang@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser.c:997: warning: Function parameter or member 'ss_info' not described in 'get_ss_info_from_tbl'
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser.c:997: warning: Excess function parameter 'ssinfo' description in 'get_ss_info_from_tbl'
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c:391:25: warning: no previous prototype for ‘get_engine_type’ [-Wmissing-prototypes]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_opp.c:427:6: warning: no previous prototype for ‘dce60_opp_set_clamping’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_opp.c:548:6: warning: no previous prototype for ‘dce60_opp_program_bit_depth_reduction’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_opp.c:571:6: warning: no previous prototype for ‘dce60_opp_program_clamping_and_pixel_encoding’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_opp.c:681:6: warning: no previous prototype for ‘dce60_opp_program_fmt’ [-Wmissing-prototypes]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Mauro Rossi <issor.oruam@gmail.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
And only declare it if it's to be used.
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_dmcu.h:320:23: warning: ‘abm_gain_stepsize’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_dmcu.h:320:23: warning: ‘abm_gain_stepsize’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_dmcu.h:320:23: warning: ‘abm_gain_stepsize’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_dmcu.h:320:23: warning: ‘abm_gain_stepsize’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_dmcu.h:320:23: warning: ‘abm_gain_stepsize’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_dmcu.h:320:23: warning: ‘abm_gain_stepsize’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_dmcu.h:320:23: warning: ‘abm_gain_stepsize’ defined but not used [-Wunused-const-variable=]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Mauro Rossi <issor.oruam@gmail.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_dmcu.c:74:6: warning: no previous prototype for ‘dce_dmcu_load_iram’ [-Wmissing-prototypes]
In file included from drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_dmcu.c:31:
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_transform.c: In function ‘dce60_transform_set_scaler’:
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_transform.c:496:7: warning: variable ‘filter_updated’ set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_transform.c: In function ‘dce60_transform_set_pixel_storage_depth’:
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_transform.c:1040:19: warning: variable ‘expan_mode’ set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_transform.c:1040:6: warning: variable ‘pixel_depth’ set but not used [-Wunused-but-set-variable]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Mauro Rossi <issor.oruam@gmail.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Demote the one that provides no param descriptions.
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_clock_source.c:142: warning: Function parameter or member 'calc_pll_cs' not described in 'calculate_fb_and_fractional_fb_divider'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_clock_source.c:142: warning: Function parameter or member 'target_pix_clk_100hz' not described in 'calculate_fb_and_fractional_fb_divider'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_clock_source.c:142: warning: Function parameter or member 'ref_divider' not described in 'calculate_fb_and_fractional_fb_divider'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_clock_source.c:142: warning: Function parameter or member 'post_divider' not described in 'calculate_fb_and_fractional_fb_divider'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_clock_source.c:142: warning: Function parameter or member 'feedback_divider_param' not described in 'calculate_fb_and_fractional_fb_divider'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_clock_source.c:142: warning: Function parameter or member 'fract_feedback_divider_param' not described in 'calculate_fb_and_fractional_fb_divider'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_clock_source.c:200: warning: Function parameter or member 'calc_pll_cs' not described in 'calc_fb_divider_checking_tolerance'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_clock_source.c:200: warning: Function parameter or member 'pll_settings' not described in 'calc_fb_divider_checking_tolerance'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_clock_source.c:200: warning: Function parameter or member 'ref_divider' not described in 'calc_fb_divider_checking_tolerance'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_clock_source.c:200: warning: Function parameter or member 'post_divider' not described in 'calc_fb_divider_checking_tolerance'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_clock_source.c:200: warning: Function parameter or member 'tolerance' not described in 'calc_fb_divider_checking_tolerance'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_clock_source.c:478: warning: Function parameter or member 'clk_src' not described in 'dce110_get_pix_clk_dividers_helper'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_clock_source.c:478: warning: Function parameter or member 'pll_settings' not described in 'dce110_get_pix_clk_dividers_helper'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_clock_source.c:478: warning: Function parameter or member 'pix_clk_params' not described in 'dce110_get_pix_clk_dividers_helper'
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_link_encoder.c:1200:6: warning: no previous prototype for ‘dce60_link_encoder_enable_dp_output’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_link_encoder.c:1239:6: warning: no previous prototype for ‘dce60_link_encoder_enable_dp_mst_output’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_link_encoder.c:1429:6: warning: no previous prototype for ‘dce60_link_encoder_dp_set_phy_pattern’ [-Wmissing-prototypes]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Mauro Rossi <issor.oruam@gmail.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_stream_encoder.c: In function ‘dce110_update_generic_info_packet’:
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_stream_encoder.c:70:11: warning: variable ‘regval’ set but not used [-Wunused-but-set-variable]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: George Shen <george.shen@amd.com>
Cc: Eric Bernstein <eric.bernstein@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_audio.c:871:6: warning: no previous prototype for ‘dce60_aud_wall_dto_setup’ [-Wmissing-prototypes]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Mauro Rossi <issor.oruam@gmail.com>
Cc: Charlene Liu <Charlene.Liu@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser2.c:501: warning: Function parameter or member 'dcb' not described in 'bios_parser_get_gpio_pin_info'
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser2.c:501: warning: Function parameter or member 'gpio_id' not described in 'bios_parser_get_gpio_pin_info'
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser2.c:501: warning: Function parameter or member 'info' not described in 'bios_parser_get_gpio_pin_info'
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser2.c:815: warning: Function parameter or member 'dcb' not described in 'bios_parser_get_spread_spectrum_info'
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser2.c:815: warning: Function parameter or member 'signal' not described in 'bios_parser_get_spread_spectrum_info'
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser2.c:815: warning: Function parameter or member 'index' not described in 'bios_parser_get_spread_spectrum_info'
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser2.c:815: warning: Function parameter or member 'ss_info' not described in 'bios_parser_get_spread_spectrum_info'
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser2.c:1210: warning: Function parameter or member 'dcb' not described in 'bios_parser_set_scratch_critical_state'
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser2.c:1210: warning: Function parameter or member 'state' not described in 'bios_parser_set_scratch_critical_state'
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser.c:2588:16: warning: no previous prototype for ‘update_slot_layout_info’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser.c:2692:16: warning: no previous prototype for ‘get_bracket_layout_record’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser.c:925: warning: Function parameter or member 'dcb' not described in 'bios_parser_get_spread_spectrum_info'
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser.c:925: warning: Function parameter or member 'signal' not described in 'bios_parser_get_spread_spectrum_info'
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser.c:925: warning: Function parameter or member 'index' not described in 'bios_parser_get_spread_spectrum_info'
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser.c:925: warning: Function parameter or member 'ss_info' not described in 'bios_parser_get_spread_spectrum_info'
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser.c:997: warning: Function parameter or member 'bp' not described in 'get_ss_info_from_tbl'
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser.c:997: warning: Function parameter or member 'id' not described in 'get_ss_info_from_tbl'
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser.c:997: warning: Function parameter or member 'ss_info' not described in 'get_ss_info_from_tbl'
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser.c:1022: warning: Function parameter or member 'bp' not described in 'get_ss_info_from_internal_ss_info_tbl_V2_1'
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser.c:1022: warning: Function parameter or member 'id' not described in 'get_ss_info_from_internal_ss_info_tbl_V2_1'
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser.c:1022: warning: Function parameter or member 'info' not described in 'get_ss_info_from_internal_ss_info_tbl_V2_1'
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser.c:1087: warning: Function parameter or member 'bp' not described in 'get_ss_info_from_ss_info_table'
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser.c:1087: warning: Function parameter or member 'id' not described in 'get_ss_info_from_ss_info_table'
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser.c:1087: warning: Function parameter or member 'ss_info' not described in 'get_ss_info_from_ss_info_table'
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser.c:1469: warning: Function parameter or member 'dcb' not described in 'bios_parser_get_encoder_cap_info'
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser.c:1469: warning: Function parameter or member 'object_id' not described in 'bios_parser_get_encoder_cap_info'
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser.c:1469: warning: Function parameter or member 'info' not described in 'bios_parser_get_encoder_cap_info'
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser.c:1508: warning: Function parameter or member 'bp' not described in 'get_encoder_cap_record'
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser.c:1508: warning: Function parameter or member 'object' not described in 'get_encoder_cap_record'
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser.c:1566: warning: Function parameter or member 'dcb' not described in 'bios_parser_get_ss_entry_number'
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser.c:1566: warning: Function parameter or member 'signal' not described in 'bios_parser_get_ss_entry_number'
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser.c:1619: warning: Function parameter or member 'bp' not described in 'get_ss_entry_number_from_ss_info_tbl'
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser.c:1619: warning: Function parameter or member 'id' not described in 'get_ss_entry_number_from_ss_info_tbl'
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser.c:1686: warning: Function parameter or member 'bp' not described in 'get_ss_entry_number'
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser.c:1686: warning: Function parameter or member 'id' not described in 'get_ss_entry_number'
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser.c:1705: warning: Function parameter or member 'bp' not described in 'get_ss_entry_number_from_internal_ss_info_tbl_v2_1'
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser.c:1705: warning: Function parameter or member 'id' not described in 'get_ss_entry_number_from_internal_ss_info_tbl_v2_1'
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser.c:1740: warning: Function parameter or member 'bp' not described in 'get_ss_entry_number_from_internal_ss_info_tbl_V3_1'
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser.c:1740: warning: Function parameter or member 'id' not described in 'get_ss_entry_number_from_internal_ss_info_tbl_V3_1'
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser.c:1783: warning: Function parameter or member 'dcb' not described in 'bios_parser_get_gpio_pin_info'
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser.c:1783: warning: Function parameter or member 'gpio_id' not described in 'bios_parser_get_gpio_pin_info'
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser.c:1783: warning: Function parameter or member 'info' not described in 'bios_parser_get_gpio_pin_info'
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser.c:2211: warning: Function parameter or member 'dcb' not described in 'bios_parser_set_scratch_critical_state'
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser.c:2211: warning: Function parameter or member 'state' not described in 'bios_parser_set_scratch_critical_state'
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser.c:2588:16: warning: no previous prototype for ‘update_slot_layout_info’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser.c:2692:16: warning: no previous prototype for ‘get_bracket_layout_record’ [-Wmissing-prototypes]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Igor Kravchenko <Igor.Kravchenko@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/command_table_helper2.c:145: warning: Function parameter or member 't' not described in 'dal_cmd_table_helper_transmitter_bp_to_atom2'
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/command_table_helper.c:131: warning: Function parameter or member 't' not described in 'dal_cmd_table_helper_transmitter_bp_to_atom'
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Mauro Rossi <issor.oruam@gmail.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_debugfs.c:699: warning: Function parameter or member 'm' not described in 'dmub_tracebuffer_show'
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_debugfs.c:699: warning: Function parameter or member 'data' not described in 'dmub_tracebuffer_show'
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_debugfs.c:743: warning: Function parameter or member 'm' not described in 'dmub_fw_state_show'
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_debugfs.c:743: warning: Function parameter or member 'data' not described in 'dmub_fw_state_show'
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Mikita Lipski <mikita.lipski@amd.com>
Cc: Eryk Brol <eryk.brol@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/basics/conversion.c:86: warning: Function parameter or member 'matrix' not described in 'convert_float_matrix'
drivers/gpu/drm/amd/amdgpu/../display/dc/basics/conversion.c:86: warning: Function parameter or member 'flt' not described in 'convert_float_matrix'
drivers/gpu/drm/amd/amdgpu/../display/dc/basics/conversion.c:86: warning: Function parameter or member 'buffer_size' not described in 'convert_float_matrix'
drivers/gpu/drm/amd/amdgpu/../display/dc/basics/conversion.c:86: warning: Excess function parameter 'param' description in 'convert_float_matrix'
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit 71338cb4a7 ("drm/amd/display: enable idle optimizations for linux
(MALL stutter)") adds active_vblank_irq_count to amdgpu_display_manager
in ./drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h.
The kerneldoc is incorrectly formatted, and make htmldocs warns:
./drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:
340: warning: Incorrect use of kernel-doc format: * @active_vblank_irq_count
379: warning: Function parameter or member 'active_vblank_irq_count' not described in 'amdgpu_display_manager'
Tweak the kerneldoc for active_vblank_irq_count.
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dc_allow_idle_optimizations() needs to be protected by
CONFIG_DRM_AMD_DC_DCN.
Fixes: 71338cb4a7 ("drm/amd/display: enable idle optimizations for linux (MALL stutter)")
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
UAPI Changes:
- Not necessarily one, but we document that userspace needs to force probe connectors.
Cross-subsystem Changes:
- Require FB_ATY_CT for aty on sparc64.
- video: Fix documentation, and a few compiler warnings.
- Add devicetree bindings for DP connectors.
- dma-buf: Update kernel-doc, and add might_lock for resv objects in begin/end_cpu_access.
Core Changes:
- ttm: Warn when releasing a pinned bo.
- ttm: Cleanup bo size handling.
- cma-helper: Remove prime infix, and implement mmap as GEM CMA functions.
- Split drm_prime_sg_to_page_addr_arrays into 2 functions.
- Add a new api to install irq using devm.
- Update panel kerneldoc to inline style.
- Add DP support to drm/bridge.
- Assorted small fixes to ttm, fb-helper, scheduler.
- Add atomic_commit_setup function callback.
- Automatically use the atomic gamma_set, instead of forcing drivers to declare the default atomic version.
- Allow using degamma for legacy gamma if gamma is not available.
- Clarify that primary/cursor planes are not tied to 1 crtc (depending on possible_crtcs).
- ttm: Cleanup the lru handler.
Driver Changes:
- Add pm support to ingenic.
- Assorted small fixes in radeon, via, rockchip, omap2fb, kmb, gma500, nouveau, virtio, hisilicon, ingenic, s6e63m0 panel, ast, udlfb.
- Add BOE NV110WTM-N61, ys57pss36bh5gq, Khadas TS050 panels.
- Stop using pages with drm_prime_sg_to_page_addr_arrays, and switch all callers to use ttm_sg_tt_init.
- Cleanup compiler and docbook warnings in a lot of fbdev devices.
- Use the drmm_vram_helper in hisilicon.
- Add support for BCM2711 DSI1 in vc4.
- Add support for 8-bit delta RGB panels to ingenic.
- Add documentation on how to test vkms.
- Convert vc4 to atomic helpers.
- Use degamma instead of gamma table in omap, to add support for CTM and color encoding/range properties.
- Rework omap DSI code, and merge all omapdrm modules now that the last omap panel is now a drm panel.
- More refactoring of omap dsi code.
- Enable 10/12 bpc outputs in vc4.
-----BEGIN PGP SIGNATURE-----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=orEC
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2020-12-17' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.12:
UAPI Changes:
- Not necessarily one, but we document that userspace needs to force probe connectors.
Cross-subsystem Changes:
- Require FB_ATY_CT for aty on sparc64.
- video: Fix documentation, and a few compiler warnings.
- Add devicetree bindings for DP connectors.
- dma-buf: Update kernel-doc, and add might_lock for resv objects in begin/end_cpu_access.
Core Changes:
- ttm: Warn when releasing a pinned bo.
- ttm: Cleanup bo size handling.
- cma-helper: Remove prime infix, and implement mmap as GEM CMA functions.
- Split drm_prime_sg_to_page_addr_arrays into 2 functions.
- Add a new api to install irq using devm.
- Update panel kerneldoc to inline style.
- Add DP support to drm/bridge.
- Assorted small fixes to ttm, fb-helper, scheduler.
- Add atomic_commit_setup function callback.
- Automatically use the atomic gamma_set, instead of forcing drivers to declare the default atomic version.
- Allow using degamma for legacy gamma if gamma is not available.
- Clarify that primary/cursor planes are not tied to 1 crtc (depending on possible_crtcs).
- ttm: Cleanup the lru handler.
Driver Changes:
- Add pm support to ingenic.
- Assorted small fixes in radeon, via, rockchip, omap2fb, kmb, gma500, nouveau, virtio, hisilicon, ingenic, s6e63m0 panel, ast, udlfb.
- Add BOE NV110WTM-N61, ys57pss36bh5gq, Khadas TS050 panels.
- Stop using pages with drm_prime_sg_to_page_addr_arrays, and switch all callers to use ttm_sg_tt_init.
- Cleanup compiler and docbook warnings in a lot of fbdev devices.
- Use the drmm_vram_helper in hisilicon.
- Add support for BCM2711 DSI1 in vc4.
- Add support for 8-bit delta RGB panels to ingenic.
- Add documentation on how to test vkms.
- Convert vc4 to atomic helpers.
- Use degamma instead of gamma table in omap, to add support for CTM and color encoding/range properties.
- Rework omap DSI code, and merge all omapdrm modules now that the last omap panel is now a drm panel.
- More refactoring of omap dsi code.
- Enable 10/12 bpc outputs in vc4.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/78381a4f-45fd-aed4-174a-94ba051edd37@linux.intel.com
This reverts commit a135a1b4c4.
This leads to blank screens on some boards after replugging a
display. Revert until we understand the root cause and can
fix both the leak and the blank screen after replug.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211033
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1427
Cc: Stylon Wang <stylon.wang@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Andre Tomt <andre@tomt.net>
Cc: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
From Ard:
"Simply disabling -mgeneral-regs-only left and right is risky, given that
the standard AArch64 ABI permits the use of FP/SIMD registers anywhere,
and GCC is known to use SIMD registers for spilling, and may invent
other uses of the FP/SIMD register file that have nothing to do with the
floating point code in question. Note that putting kernel_neon_begin()
and kernel_neon_end() around the code that does use FP is not sufficient
here, the problem is in all the other code that may be emitted with
references to SIMD registers in it.
So the only way to do this properly is to put all floating point code in
a separate compilation unit, and only compile that unit with
-mgeneral-regs-only."
Disable support until the code can be properly refactored to support this
properly on aarch64.
Acked-by: Will Deacon <will@kernel.org>
Reported-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The hw supports fp16, this is not only useful for HDR,
but also for standard dynamic range displays, because
it allows to get more precise color reproduction with
about 11 - 12 bpc linear precision in the unorm range
0.0 - 1.0.
Working fp16 scanout+display (and HDR over HDMI) was
verified on a DCE-8 asic, so i assume that the more
recent DCE-10/11 will work equally well, now that
format-specific plane scaling constraints are properly
enforced, e.g., the inability of fp16 to scale on older
hw like DCE-8 to DCE-11.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This takes hw constraints specific to pixel formats into account,
e.g., the inability of older hw to scale fp16 format framebuffers.
It should now allow safely to enable fp16 formats also on DCE-8,
DCE-10, DCE-11.0
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need these to support PSR on DCN302
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We can only use this feature when the display is idle. When active vblank
irq count is 0 we know all the displays are idle.
[How]
-Add a active vblank irq counter
-Update the counter when we enable/disable vblank irq
-if vblank irq count is 0 we can consider mall stutter
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nick Kazlauskas <Nicholas.Kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[How]
- use dc interface instead of hwss interface in cursor functions, to keep
dc->idle_optimizations_allowed updated
- add dc interface to check if idle optimizations might apply to a plane
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some of the newly added code is hidden inside of #ifdef
blocks, but one variable is unused when debugfs is disabled:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:8370:8: error: unused variable 'configure_crc' [-Werror,-Wunused-variable]
Change the #ifdef to an if(IS_ENABLED()) check to fix the warning
and avoid adding more #ifdefs.
Fixes: c920888c60 ("drm/amd/display: Expose new CRC window property")
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following coccinelle report:
drivers/gpu/drm/amd/display/dc/dcn302/dcn302_resource.c:1357:6-8:
WARNING: possible condition with no effect (if == else)
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove including <linux/version.h> that don't need it.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
clang (quite rightly) complains fairly loudly about the newly added
mpc1_get_mpc_out_mux() function returning an uninitialized value if the
'opp_id' checks don't pass.
This may not happen in practice, but the code really shouldn't return
garbage if the sanity checks don't pass.
So just initialize 'val' to zero to avoid the issue.
Fixes: 110b055b28 ("drm/amd/display: add getter routine to retrieve mpcc mux")
Cc: Josip Pavic <Josip.Pavic@amd.com>
Cc: Bindu Ramamurthy <bindu.r@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Adjust a jump target so that a bit of exception handling can be better
reused at the end of this function.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* Return directly after a call of the function “kzalloc” failed
at the beginning.
* Delete a label which became unnecessary with this refactoring.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
EDID parsing in S3 resume pushes new display modes
to probed_modes list but doesn't consolidate to actual
mode list. This creates a race condition when
amdgpu_dm_connector_ddc_get_modes() re-initializes the
list head without walking the list and results in memory leak.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=209987
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why & How]
Add function to identify which MPCC is providing input to a specified OPP
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We defer clock updates to after pipes have been programmed. In
some instances we use DPPCLK that have been previously set to be
"unused". This results in a brief window of time where underflow
could occur.
[How]
During prepare bandwidth allow rn_update_clocks_update_dpp_dto
to check each instance and compare previous clock to new clock.
If new clock is higher than previous clock, program DPPDTO.
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- restore lvtma_pwrseq_delay2 from vbios integrated info table
- restore MVID/NVID after power up.
- Enable timer wake up mask when enable timer interrupt.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For certain timings, Renoir may underflow due to sr exit latency
being too slow.
[How]
Updated wm table for renoir.
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
DSC should only be acquired per OPP. Therefore, DSC should only
be acquired for the top_pipe when ODM is enabled.
Not doing this check may lead to acquiring more DSC's than needed
when doing MPO + ODM Combine.
[HOW]
Only acquire DSC if pipe is top_pipe.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
FP2 programming not happening when topology changes occur with multiple
displays.
[How]
Ensure FP2 is programmed whenever global sync changes occur but wait for
VACTIVE first to avoid underflow.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
new_crtc_state is already dereferenced earlier in the function
[How]
Remove the check
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Virtual signals were previously counted as a workaround to S0i2 hang
which is fixed on Renoir. This blocks S0i3 diags testing.
[HOW]
Stop counting virtual signals as S0i2 hang is fixed on Renoir.
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
there is some garbage showing up during reboot test.
Reason:
SMU might handle display driver msg defered and driver will send
next msg to SMU after 10ms timeout, once SMU FW handle previous msg,
parameters are changed to next one, which result in a wrong value be programmed.
[How]
Extend timeout to 2s so SMU will have enough time to handle driver msg.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Need driver to pass values of backlight ramp start and ramp reduction so
that intensity can be ramped down appropriately.
[How]
Using abm_parameters structure to get these values from driver.
Signed-off-by: Rizvi <syerizvi@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
The sink count change HPD_IRQ will be ignored if the branch device has only
DP DFP.
[how]
To remove the port type restriction.
Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Some MST display may not report the internal panel to DEVICE_COUNT,
that makes the check condition always failed.
[how]
To update this condition with the reported device count + 1
(because the immediate repeater's internal panel is possibly
not included in DEVICE_COUNT)
Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
HUBP blanking sequence on DCN30 requires us to check if HUBP is in blank
and also toggle HUBP_DISABLE, which should instead be called
HUBP_SOFT_RESET for what it does in HW.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
handler is supposedly passed in as a function pointer;
however, the entire struct amdgpu_dm_irq_handler_data
gets from the list is used to check match.
[how]
use the interrupt_handler within amdgpu_dm_irq_handler_data
for checking match.
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add documentation for crc window.
Fixes: c920888c60 ("drm/amd/display: Expose new CRC window property")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Some old ASICs might not implement/require get_dig_frontend helper; in
this scenario, we can have a NULL pointer exception when we try to call
it inside vbios disable operation. For example, this situation might
happen when using Polaris12 with an eDP panel. This commit avoids this
situation by adding a specific get_dig_frontend implementation for DCEx.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Cc: Chiawen Huang <chiawen.huang@amd.com>
Reported-and-tested-by: Borislav Petkov <bp@suse.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Kernel test robot throws below warning ->
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:5349:5:
warning: no previous prototype for 'amdgpu_dm_crtc_atomic_set_property'
[-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:5349:5:
warning: no previous prototype for function
'amdgpu_dm_crtc_atomic_set_property' [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:5373:5:
warning: no previous prototype for 'amdgpu_dm_crtc_atomic_get_property'
[-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:5373:5:
warning: no previous prototype for function
'amdgpu_dm_crtc_atomic_get_property' [-Wmissing-prototypes]
As these functions are only used inside amdgpu_dm.c, these can be
made static.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Add new aux_channel_type
- Changed port_index to instance in dmub_cmd_dp_aux_control_data
- Change aux_return_code_type to sync up with driver
- param for ramping abm based on backlight level
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The OGAM LUT precision was accumulating too much error
in the higher end.
[How]
Instead of calculating all points of the LUT in relation
to the previous ones, perform a full calculation in one
of the intermediate segments to stop error propagation.
Signed-off-by: Felipe Clark <Felipe.Clark@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
FP2 is not double buffered and must wait for VACTIVE
before programming.
[How]
Only update when there is a full update we should
change FP2 to avoid delay every flip.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For certain timings, Renoir may underflow due to sr exit
latency being too slow.
[How]
Updated wm table for renoir.
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
race condition of programming FP2 wrt pipe locking
and vactive state can cause underflow/black screen
[How]
Enforce the FP2 is only programmed during vactive,
and unlock pipe soon afterwards.
Signed-off-by: Martin Leung <martin.leung@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We are missing the DP info frame update on dcn30, and this will
lead to DP SDPs not being sent;
[How]
Add the DP info frame update for dcn30;
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
dcn30_link_encoder_validate_output_with_stream was a static function.
[How]
remove the static define and include it in the header.
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Find out when we try to disable CRC calculation,
crc generation is still enabled. Main reason is
that dc_stream_configure_crc() will never get
called when the source is AMDGPU_DM_PIPE_CRC_SOURCE_NONE.
[How]
Add checking condition that when source is
AMDGPU_DM_PIPE_CRC_SOURCE_NONE, we should also call
dc_stream_configure_crc() to disable crc calculation.
Also, clean up crc window when disable crc calculation.
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Many VR headsets require a HSYNC width of 4, but DCN
has default minimum of 8.
[How]
Change the arbitrary minimum HSYNC width to 4 to match
DCN20.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
some DP_SEC register defs and masks are missing.
[How]
add the missing defs and masks.
Signed-off-by: Max Tseng <chuan-yu.tseng@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There is a warning that triggers when pstate takes too long.
Pstate can take up to ~200us on Linux without hanging but
it is currently set to 40us.
[How]
Change the timeout for the warning to be 180us on Linux.
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CONFIG_DRM_AMD_DC_DCN3_0 is retired. drop it
Signed-off-by: Flora Cui <flora.cui@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To support legacy gamma ioctls the drivers need to set
drm_crtc_funcs.gamma_set either to a custom implementation or to
drm_atomic_helper_legacy_gamma_set. Most of the atomic drivers do the
latter.
We can simplify this by making the core handle it automatically.
Move the drm_atomic_helper_legacy_gamma_set() functionality into
drm_color_mgmt.c to make drm_mode_gamma_set_ioctl() use
drm_crtc_funcs.gamma_set if set or GAMMA_LUT property if not.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201211114237.213288-2-tomi.valkeinen@ti.com
It's only used when CONFIG_DRM_AMD_DC_DCN is set. Fixes and set but
not used warning.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After refactor our amdgpu_dm_atomic_commit, this function only invoke
drm_atomic_helper_commit. For this reason, this commit drops
amdgpu_dm_atomic_commit and add drm_atomic_helper_commit directly in the
atomic_commit hook.
v2: squash in warning fix (Alex)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than in late_init to avoid race conditions between freeing the
buffers and the initial modeset.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Scatter/gather is APU feature.
But in dm it is limited only to Renoir.
Now we need it for Vangogh.
[How]
Apply system context setup in dm_init to all APUs.
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
New value breaks VSR on high refresh panels, reverting until a fix is developed
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
dcn3_01 supports gpu_vm, but this is not enabled in amdgpu_dm
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When HDCP is on, some display would introduce audio noise during
HDCP handling.
[How]
Mute before HDCP handling when disabling core link. Unmute after
HDCP when enabling core link.
Signed-off-by: Roy Chan <roy.chan@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Without additional HostVM Latency, Renoir takes 2us longer to exit
self-refresh. This causes underflow in certain cases.
[How]
Add table for Renoir with updated sr exit latencies for WM set A.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
At very high pixel clock, bandwidth calculation exceeds 32 bit size
and overflow value. This causes the resulting selection of link rate
to be inaccurate.
[How]
Change order of operation and use fixed point to deal with integer
accuracy. Also address bug found when forcing link rate.
Signed-off-by: Chris Park <Chris.Park@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
With the addition of dc_lock acquire before dc_link_handle_hpd_rx_irq,
there will be a deadlock situation where commit state sends a request
for payload allocation on MST and wait for HPD to process DOWN_REP.
[How]
Move forward the MST message handling in handle_hpd_rx_irq so that
it will not rely on call to dc_link_handle_hpd_rx_irq.
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Currently, the offset provided to dcn30_set_disp_pattern_generator is
not forwarded to OPP for display pattern generation, resulting in
misaligned patterns and test failures.
[How]
Use the provided offset.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Samson Tam <Samson.Tam@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Change in DCN10 to use IMMEDIATE_UPDATE mode for AFMT is not
reflected in DCN30 as it uses VPG.
[How]
Use IMMEDIATE_UPDATE mode for DCN30 in VPG.
Signed-off-by: Judy Cai <HuiYi.Cai@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
power_down_on_boot is designed to power down HW when set mode is not
called before timeout. It can happen in headless system or booting with
the display is output by non-AMD GPU only.
The function will be executed only if it's not seamless boot. So in
seamless boot, the HW is still on.
It's not necessary to check this since there's no display data in both
cases.
[How]
Remove seamless boot checking in power_down_on_boot.
Signed-off-by: John Wu <john.wu@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Bump into calcReducedBlankingTiming because of mode query failed.
In this function,
timing.displayColorDepth == DISPLAY_COLOR_DEPTH_UNDEFINED.
Then req_bw == 0 because of bits_per_channel == 0.
So decide edp link settings, use default RBRx1 for special timing.
[How]
Set default bits_per_channel is 8.
Signed-off-by: Jing Zhou <Jing.Zhou@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Add support for new fw command for runtime feature detection.
[How]
Driver sends command through ring buffer, and fw returns data back
through this command.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[How & Why]
Allow clk_mgr functions to be reused by making then non-static
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Calls to disable/enable stream should be guarded with dc_lock.
[How]
Add dc_lock before calling into dc_link_handle_hpd_rx_irq.
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Signal FreeSync display that we are in Fixed Rate mode, and
expand the FreeSync range to 1024.
[How]
Set the new bit in SB16:bit0, and augment the min and max
refresh rate with 2 extra bits.
Signed-off-by: AMD\ramini <Reza.Amini@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Implement feature of VSIF V3
[How]
Set refresh rate MSB for extended range
Signed-off-by: Reza Amini <Reza.Amini@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Previously we accepted non-linear buffers for the cursor plane. This
results in bad output, DC validation failures and oops.
Make sure the FB uses a linear layout in the atomic check function.
The GFX8- check is inspired from ac_surface_set_bo_metadata in Mesa.
The GFX9+ check comes from convert_tiling_flags_to_modifier.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
References: https://gitlab.freedesktop.org/drm/amd/-/issues/1390
Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As more checks are added, the indentation makes the code harder to read.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To avoid a recently added warning:
Bogus possible_crtcs: [ENCODER:65:TMDS-65] possible_crtcs=0xf (full crtc mask=0x7)
WARNING: CPU: 3 PID: 439 at drivers/gpu/drm/drm_mode_config.c:617 drm_mode_config_validate+0x178/0x200 [drm]
In this case the warning is harmless, but confusing to users.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=209123
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace the width check with a pitch check, which matches DM internals.
Add a new check to make sure the pitch (in pixels) matches the width.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of relying on pitch (in pixels) == width, use the FB pitch. This
is less confusing to readers, and works correctly if we ever support FBs
with a pitch (in pixels) != width.
This also makes the code symmetrical with fill_plane_buffer_attributes.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of silently failing the atomic check, explain what happened via
a debug log. This makes it easier for user-space to figure out why
something failed.
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_helpers.c: In function ‘dm_dtn_log_append_v’:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_helpers.c:345:2: warning: function ‘dm_dtn_log_append_v’ might be a candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_helpers.c:375:3: warning: function ‘dm_dtn_log_append_v’ might be a candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/basics/vector.c:55:6: warning: no previous prototype for ‘dal_vector_presized_costruct’ [-Wmissing-prototypes]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/basics/fixpt31_32.c:29:32: warning: ‘dc_fixpt_pi’ defined but not used [-Wunused-const-variable=]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/basics/conversion.c:34:10: warning: no previous prototype for ‘fixed_point_to_int_frac’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/basics/conversion.c:81:6: warning: no previous prototype for ‘convert_float_matrix’ [-Wmissing-prototypes]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_pp_smu.c:664:20: warning: no previous prototype for ‘pp_nv_set_pme_wa_enable’ [-Wmissing-prototypes]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_pp_smu.c:538:6: warning: no previous prototype for ‘pp_rv_set_wm_ranges’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_pp_smu.c:590:6: warning: no previous prototype for ‘pp_rv_set_pme_wa_enable’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_pp_smu.c:601:6: warning: no previous prototype for ‘pp_rv_set_active_display_count’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_pp_smu.c:614:6: warning: no previous prototype for ‘pp_rv_set_min_deep_sleep_dcfclk’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_pp_smu.c:627:6: warning: no previous prototype for ‘pp_rv_set_hard_min_dcefclk_by_freq’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_pp_smu.c:640:6: warning: no previous prototype for ‘pp_rv_set_hard_min_fclk_by_freq’ [-Wmissing-prototypes]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_color.c:128: warning: Function parameter or member 'lut' not described in '__drm_lut_to_dc_gamma'
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_color.c:128: warning: Function parameter or member 'gamma' not described in '__drm_lut_to_dc_gamma'
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_color.c:128: warning: Function parameter or member 'is_legacy' not described in '__drm_lut_to_dc_gamma'
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_color.c:426: warning: Function parameter or member 'dc_plane_state' not described in 'amdgpu_dm_update_plane_color_mgmt'
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
'dpp_input_csc_matrix' is used by some, but not all source files which
include dpp.h.
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/inc/hw/dpp.h:50:42: warning: ‘dpp_input_csc_matrix’ defined but not used [-Wunused-const-variable=]
NB: Snipped lots of these for brevity
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add feature caps to allow way for driver to query what features
FW supports
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DPCS related info needs to be properly defined within code.
[How]
Add missing DPCS related info to code.
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Nikola Cornij <nikola.cornij@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Whenever DSC parameters are changed we need to perform full modeset to commit
DSC changes to DC.
[How]
If dsc_force_changed is set, need to set mode_changed on new CRTC state
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The DSCL memory blocks should be powered down when they're not in use.
This will reduce power consumption.
[How]
1. Write to DSCL_MEM_PWR_FORCE to put memory to shutdown when DSCL is not
used.
2. Added a debug option to allow this behaviour to be turned off
Signed-off-by: Jacky Liao <ziyu.liao@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
While booting into OS, driver updates DPP/DISP CLKs.
But init clock value is zero which is invalid.
[How]
Get current clocks value to update init clocks.
To avoid underflow.
Signed-off-by: Brandon Syu <Brandon.Syu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
enable_link_dp_mst checks that cur_link_settings != unknown to determine
that the link is already enabled, to skip redundant enablement calls for
multiple streams on the same link. During dc_reinitialize_hardware,
cur_link_settings on previously-active links is not cleared, which blocks
MST links from being re-enabled after a reinitialization.
[How]
- check for link_status->link_active instead, as it's the real intent
- clear cur_link_settings when we clear link_active
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
dram clock change latencies get updated using ddr4 latency table, but
does that update does not happen before validation. This value
should not be the default and should be number received from
df for better mode support.
This may cause a PState hang on high refresh panels with short vblanks
such as on 1080p 360hz or 300hz panels.
[HOW]
Update latency from 23.84 to 11.72.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The HDR3DLUT and SHAPER memory blocks should be powered down when
they're not in use. This will reduce power consumption.
[How]
1. Write to HDR3DLUT_MEM_PWR_FORCE to put memory to shutdown
when HDR3DLUT is not used.
2. Write to SHAPER_MEM_PWR_FORCE to put memory to shutdown
when SHAPER is not used.
Signed-off-by: Jacky Liao <ziyu.liao@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 2208f39c75.
It caused a regression in internal FPGA tests.
Signed-off-by: Eric Bernstein <Eric.Bernstein@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Set dpms off on the connector that was unplugged, for the side effect of
releasing some references held through deallocation of MST payload. This is
the expected behaviour for non MST devices as well.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Recent changes to upstream mst code remove the callback which
cleared the internal state for mst. Move the missing functionality
that was previously called through the destroy call back for mst connector
destroy
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Setting any rotation on the cursor plane is ignored by amdgpu.
Because of DCE/DCN design, it's not possible to rotate the cursor.
Instead of displaying the wrong result, stop advertising the rotation
property for the cursor plane.
Now that we check all cursor plane properties in amdgpu_dm_atomic_check,
remove the TODO.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Don't allow user-space to set different scaling parameters for the
cursor plane and for the primary plane. Because of DCE/DCN design,
it's not possible to have a mismatch.
The old check in dm_update_plane_state is superseded by this new
check.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Looking at handle_cursor_update, it doesn't seem like src_{x,y,w,h}
are picked up by DC. I also tried to change these parameters via a
test KMS client, and amdgpu ignored them. Instead of displaying the
wrong result, reject the atomic commit.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch expands the cursor checks added in "drm/amd/display: add basic
atomic check for cursor plane" to also include a FB size check. Without
this patch, setting a FB smaller than max_cursor_size with an invalid
width would result in amdgpu error messages and a fallback to a 64-byte
width:
[drm:hubp1_cursor_set_attributes [amdgpu]] *ERROR* Invalid cursor pitch of 100. Only 64/128/256 is supported on DCN.
Note that DC uses the word "pitch" when actually checking the FB width.
Indeed, the function handle_cursor_update does this:
attributes.pitch = attributes.width;
In my tests, the cursor FB actually had a pitch of 512 bytes.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Reported-by: Pierre-Loup A. Griffais <pgriffais@valvesoftware.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Cached backlight is never being updated since panel_cntl specific
registers were moved from abm to panel_cntl.
[How]
Update cached backlight in set_abm_immediate_disable as what we used to
do. Also, update the priority of backlight restore mechanism so that
cached backlight has the highest priority since it is always correct.
Signed-off-by: Camille Cho <Camille.Cho@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
ASIC requirement.
[how]
Make disable_*_power_gate to false.
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The GAMCOR memory blocks should be powered down when they're not in use.
This will reduce power consumption.
[How]
Write to GAMCOR_MEM_PWR_FORCE to put memory to shutdown
when GAMCOR is not used.
Signed-off-by: Jacky Liao <ziyu.liao@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Remove temp macro since the enum is in header file already.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
only apply multiple display power optimization in case there are more
than one internal display.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Get internal display info from vbios and pass it to dmub fw to determine
if multiple display optmization is needed.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The BLNDGAM memory blocks should be powered down when they're not in
use. This will reduce power consumption.
[How]
1. Write to BLNDGAM_MEM_PWR_FORCE to put memory to shutdown when BLNDGAM
is not used.
2. Added a debug option to allow this behaviour to be turned off
Signed-off-by: Jacky Liao <ziyu.liao@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
t9 delay func is called twice after setting power off, the unexpected
action results in a doubling of the added 140ms t9 delay
[How]
If the backlight has been turned off, does not turn it off again
Signed-off-by: Sherry <Yao.Wang1@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The MPCC may change and request data when the pipes are switching from 2
to 1 or 1 to 2. During the switch there is a possibility of underflow
and flicker/missing data.
[How]
During VBlank the MPCC won't request data. The trick is to delay and
wait on VBlank, ONLY when pipes are either turning on or off, right
before MPCC is reset for the pipes.
Signed-off-by: Tashfique Abdullah <tabdullah@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
On some platforms, DMCU is no longer used. In these cases, some DMCU
memory should be completely powered off to save power.
[How]
1. Set DMCU_ERAM_MEM_PWR_FORCE to shutdown memory when DMCU is not in
use
2. Added a debug option to allow this behaviour to be turned off
3. Set all memory low power debug options to off first, to not
immediately cause problems
Signed-off-by: Jacky Liao <ziyu.liao@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Incorrect panel register settings are applied for power sequence because
the register macro is not defined in resource.
[How]
Implement same register space to future resource files.
Signed-off-by: Chris Park <Chris.Park@amd.com>
Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some sink devices wish to have access to the minimum HBlank supported by
the ASIC.
[How]
Make the ASIC minimum HBlank available in Source Device information
address 0x340.
Signed-off-by: Ashley Thomas <Ashley.Thomas2@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
HDCP 1.4 failed on SL8800 SW w/a test driver use.
[how]
slower down the HW i2c speed when used by HW i2c.
this request: each acquired_i2c_engine setup the i2c speed needed.
and set the I2c engine for HDCP use at release_engine.
this covers SW using HW I2c engine and HDCP using HW I2c engine. for
dmcu using HW I2c engine, needs add similar logic in dmcufw.
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding multiple break statements instead of just
letting the code fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The HDCP feature requires at least one connector attached to the device;
however, some GPUs do not have a physical output, making the HDCP
initialization irrelevant. This patch disables HDCP initialization when
the graphic card does not have output.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dpcs reg are missing for dcn302 link encoder regs list, so add them.
Just like dcn3
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
These comments are helpful in understanding which case each if
statement handles.
[How]
Add comments for state transitions (9 possible cases)
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Zhan Liu <zhan.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We call add display multiple times because DESIRED->ENABLED cannot
happen instantaneously. We can't compare the new_state/old_state to
avoid this because on unplug we set the state to DESIRED and on hotplug
the state will still be DESIRED.
[How]
Add a flag to dm_connector_state to keep track of when to enable or
disable HDCP
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Zhan Liu <zhan.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We recently improved our display atomic commit and tail sequence to
avoid some issues related to concurrency. One of the major changes
consisted of moving the interrupt disable and the stream release from
our atomic commit to our atomic tail (commit 6d90a208cf
("drm/amd/display: Move disable interrupt into commit tail")) .
However, the new code introduced inside our commit tail function was
inserted right after the function
drm_atomic_helper_update_legacy_modeset_state(), which has routines for
updating internal data structs related to timestamps. As a result, in
certain conditions, the display module can reach a situation where we
update our constants and, after that, clean it. This situation generates
the following warning:
amdgpu 0000:03:00.0: drm_WARN_ON_ONCE(drm_drv_uses_atomic_modeset(dev))
WARNING: CPU: 6 PID: 1269 at drivers/gpu/drm/drm_vblank.c:722
drm_crtc_vblank_helper_get_vblank_timestamp_internal+0x32b/0x340 [drm]
...
RIP:
0010:drm_crtc_vblank_helper_get_vblank_timestamp_internal+0x32b/0x340
[drm]
...
Call Trace:
? dc_stream_get_vblank_counter+0x57/0x60 [amdgpu]
drm_crtc_vblank_helper_get_vblank_timestamp+0x1c/0x20 [drm]
drm_get_last_vbltimestamp+0xad/0xc0 [drm]
drm_reset_vblank_timestamp+0x63/0xd0 [drm]
drm_crtc_vblank_on+0x85/0x150 [drm]
amdgpu_dm_atomic_commit_tail+0xaf1/0x2330 [amdgpu]
commit_tail+0x99/0x130 [drm_kms_helper]
drm_atomic_helper_commit+0x123/0x150 [drm_kms_helper]
amdgpu_dm_atomic_commit+0x11/0x20 [amdgpu]
drm_atomic_commit+0x4a/0x50 [drm]
drm_atomic_helper_set_config+0x7c/0xc0 [drm_kms_helper]
drm_mode_setcrtc+0x20b/0x7e0 [drm]
? tomoyo_path_number_perm+0x6f/0x200
? drm_mode_getcrtc+0x190/0x190 [drm]
drm_ioctl_kernel+0xae/0xf0 [drm]
drm_ioctl+0x245/0x400 [drm]
? drm_mode_getcrtc+0x190/0x190 [drm]
amdgpu_drm_ioctl+0x4e/0x80 [amdgpu]
__x64_sys_ioctl+0x91/0xc0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xa9
...
For fixing this issue we rely upon a refactor introduced on
drm_atomic_helper_update_legacy_modeset_state ("Remove the timestamping
constant update from drm_atomic_helper_update_legacy_modeset_state()")
which decouples constant values update from
drm_atomic_helper_update_legacy_modeset_state to a new helper.
Basically, this commit uses this new helper and place it right after our
release module to avoid a situation where our CRTC struct gets wrong
values.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1373
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Update bounding box as per spread sheet.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
After removing added latency for HostVM by default, DDR4 sr exit
latencies were no longer large enough for some panels and caused
underflow.
[How]
Add 1us to sr enter/exit watermark.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We should use int for counting variable
[How]
Change type from bool to uint32_t
Signed-off-by: Raymond Yang <rayyang@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Instead of calculating CRC on whole frame, add flexibility to calculate
CRC on specific frame region.
[How]
Add few crc window coordinate properties. By default, CRC is calculated
on whole frame unless user space specifies the CRC calculation window.
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add a dual edp power optimization flag, so driver will
notify this flag to dmub FW to determine if apply the
power optimization.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Blue screen when PNP with multiple monitor or hotplug external monitor when playing video
due to dpp dto isn't programmed properly.
If lower dpp clock, dpp dto need to be programmed first, and actual dpp clk not avalable yet.
[How]
set dpp dto as per request clk for lower case before dpp clk update, and after dpp clk updated
set dpp dto again with actual dpp clk.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The I2C memory blocks should be powered down when they are not in use.
This will reduce power consumption.
[How]
1. Write to I2C_LIGHT_SLEEP_FORCE to put memory in light sleep when
released
2. Added a debug option to allow this behaviour to be turned off
Signed-off-by: Jacky Liao <ziyu.liao@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Check if the eDP sink supports the dynamic backlight control
[How]
Query the dynamic backlight capability in DPCD (eDP case only)
Signed-off-by: Roy Chan <roy.chan@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Cursor is missing on displays 2 and up when doing rotated
display groups in 1xnY setup. Calculation puts cursor
out of bounds so it is not enabled.
[How]
In dcn10_set_cursor_position(), add in viewport.y into cursor
calculations for 1xnY rotated display groups.
For pipe split, check viewport.y for both pipes and use lower one
to normalize cursor position before calculations.
Add odm 2:1 support ( using same calculations as pipe split ).
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Currently if VBIOSSMC_Result_UnknownCmd is returned as result of smu msg
there is no way to know. Put 1 in param so if 1 is returned, this unknown case is handled.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If the system does not have hostvm enabled, disabling it for
DML validation will allow more modes to pass at lower voltage
levels.
[How]
When initializing HostVM save state to hubbub and read back
when populating DML pipes from context.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Use GPINT command to get PSR residency from FW.
[How]
Hook up PSR residency command to DSAT.
Since PSR Count Request is deprecated, we will use this.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
dpp dto phase and modulo are programmed with actual dpp global clk
and pipe clk. Need to use actual dpp clk to prgoram dpp dto modulo
to get more accuracy ratio.
[How]
assign actual dpp clk to dccg for dpp modulo programming.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a delta in the dmub code
- add boot options
- add boot status
- remove unused auto_load_is_done func pointer
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If we use DCC modifiers this can increase the number of planes from
the initial 1 plane with metadata, so that we get a valid modifier
from getfb2.
Since the code didn't update the format_info getfb2 would only ever
return 1 plane with a modifier for which userspace expects > 1.
This moves the format lookup to amdgpu_display.c so we do not have
issues when DC is not compiled.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If we have more than 4 displays we will run
into dummy irq calls or flip timout issues.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch fixes >200 warnings.
Fixes the following W=1 kernel build warning(s):
from drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:31:
drivers/gpu/drm/amd/amdgpu/../display/include/ddc_service_types.h:126:22: warning: ‘DP_DVI_CONVERTER_ID_5’ defined but not used [-Wunused-const-variable=]
126 | static const uint8_t DP_DVI_CONVERTER_ID_5[] = "3393N2";
| ^~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/include/ddc_service_types.h:125:22: warning: ‘DP_DVI_CONVERTER_ID_4’ defined but not used [-Wunused-const-variable=]
125 | static const uint8_t DP_DVI_CONVERTER_ID_4[] = "m2DVIa";
| ^~~~~~~~~~~~~~~~~~~~~
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch fixes >200 warnings.
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/include/ddc_service_types.h:123:22: warning: ‘DP_VGA_LVDS_CONVERTER_ID_3’ defined but not used [-Wunused-const-variable=]
123 | static const uint8_t DP_VGA_LVDS_CONVERTER_ID_3[] = "dnomlA";
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/include/ddc_service_types.h:121:22: warning: ‘DP_VGA_LVDS_CONVERTER_ID_2’ defined but not used [-Wunused-const-variable=]
121 | static const uint8_t DP_VGA_LVDS_CONVERTER_ID_2[] = "sivarT";
NB: Repeated ~100 times - snipped for brevity
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adjust the FP handling to avoid nested calls.
The nested calls cause the warning below
WARNING: CPU: 3 PID: 384 at arch/x86/kernel/fpu/core.c:129 kernel_fpu_begin
Fixes: 582e2ce5b4 ("drm/amdgpu/display: FP fixes for DCN3.x (v4)")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In function amdgpu_dm_connector_get_modes, drm_edid_is_valid
will check weather (!edid), no need to check again in the if
branch.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Also rid some unused ones.
This patch solves 2000 warnings!
Fixes the following W=1 kernel build warning(s):
In file included from drivers/gpu/drm/amd/amdgpu/../display/dc/dc_types.h:33,
from drivers/gpu/drm/amd/amdgpu/../display/dc/dm_services_types.h:30,
from drivers/gpu/drm/amd/amdgpu/../display/dc/dm_services.h:35,
from drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_helpers.c:35:
At top level:
drivers/gpu/drm/amd/amdgpu/../display/include/fixed31_32.h:76:32: warning: ‘dc_fixpt_ln2_div_2’ defined but not used [-Wunused-const-variable=]
76 | static const struct fixed31_32 dc_fixpt_ln2_div_2 = { 1488522236LL };
| ^~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/include/fixed31_32.h:75:32: warning: ‘dc_fixpt_ln2’ defined but not used [-Wunused-const-variable=]
75 | static const struct fixed31_32 dc_fixpt_ln2 = { 2977044471LL };
| ^~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/include/fixed31_32.h:74:32: warning: ‘dc_fixpt_e’ defined but not used [-Wunused-const-variable=]
74 | static const struct fixed31_32 dc_fixpt_e = { 11674931555LL };
| ^~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/include/fixed31_32.h:73:32: warning: ‘dc_fixpt_two_pi’ defined but not used [-Wunused-const-variable=]
73 | static const struct fixed31_32 dc_fixpt_two_pi = { 26986075409LL };
| ^~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/include/fixed31_32.h:72:32: warning: ‘dc_fixpt_pi’ defined but not used [-Wunused-const-variable=]
72 | static const struct fixed31_32 dc_fixpt_pi = { 13493037705LL };
| ^~~~~~~~~~~
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
4K monitor shows corruption if dpp dto phase is larger than modulo.
[How]
cap phase value never larger than modulo.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Actual dpp/disp clock PMFW set are always equal or more than requested.
Need to cache the actual clock for debugging purpose.
[How]
Add actuall dpp/disp clk in clock manager and save it when set clocks.
Add an ASSERT in case of actual clock less than requested.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We don't want GSL to be enabled when only updating
plane address
[How]
Only check other pipes for immediate flip if GSL is
already enabled
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
On DCE, the cursor is not being disabled on commits where there is no
CRTC or FB enabled.
[how]
Explicitly disable the cursor in the commit tail only if the pending
commit disables the CRTC.
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Program modulo with ref dpp clk Mhz/10.
Program phase with pipe dpp clk Mhz /10.
DMUB FW could use these value to determine optimization clk
for PSR power saving.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When mpo enabled, video comes is 709. Desktop use sRGB.
So color change easily noticeable especially when switch between
mpo/non-mpo.
[How]
Force use sRGB for video TF is sRGB or BT709.
DCN1/DCN2 use predefined type with YUV.
DCN3 use distributed points type with YUV.
Signed-off-by: Jing Zhou <Jing.Zhou@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We want to make sure all immediate flips are completed before locking
the pipes, but not pipes that are not flip immediate as they will be
locked by the OTG
[How]
Skip non flip immediate pipes when checking for flip pending.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
The intended use is to force PSR into active state and ignore all
events until explicit EXIT.
A new event force_static is added to power module. It is then sent
to FW.
Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Due to the freesync power optimization increasing vtotal, the driver
believes that MPO is supported. MPO is turned on. Freesync then
exits, MPO can no longer be supported and immediate flip fails. This
causes corruption on the panel.
[How]
Avoid the freesync optimization when doing validation so in the case
freesync exits, driver can still support the configuration.
Signed-off-by: Isabel Zhang <isabel.zhang@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In some cases, prefetch mode 0 is unsupported but prefetch 1 is
supported. Due to previous change always forcing prefetch mode to 0, we
are failing bandwidth validation in cases where we should not.
[How]
By default try prefetch mode 0 but in the case validation fails, attempt
to do prefetch mode 1 to see if it is supported.
Signed-off-by: Isabel Zhang <isabel.zhang@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently we are using dcn3 reg headers for dcn302. The offsets are
different between the two so they need seperate headers.
Add dcn302 header files and use these instead of dcn3 header
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl+oiOgeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGKBQIAJw6oad/FA7j9OO2
dMoaXb8UaBehGWgW2rdfWrFPV5v0DBnp/GkdRpLoZIjV3W4mBfnog7bIa4Eswlxo
Y8sZxo5/3JlgJQUkHvzR1TYk5z61lHkUw9Kj/cCyx6YdbjSl19AfFsnhQVVMuyp9
TXL2c7hxkHlw8eBGrymVu0Ip7Zq0x8O2g+8nQpmRcvaR6SBuSHdikDF/iWCtU1YW
wpk5eWEVaAO67keZOz6b+aCFHqjFX+1dUBBuPnslucYLR73Qi16hfaU9pebe97Gb
lX/MJ1bR9BeRp314cF0PYbm4WhKjRLudHOFJH8x3dj/BiYNrFK3SJGLiiTwsrAZ8
kytU0Xs=
=Ke/D
-----END PGP SIGNATURE-----
Merge v5.10-rc3 into drm-next
We need commit f8f6ae5d07 ("mm: always have io_remap_pfn_range() set
pgprot_decrypted()") to be able to merge Jason's cleanup patch.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
amd-drm-next-5.11-2020-11-05:
amdgpu:
- Add initial support for Vangogh
- Add support for Green Sardine
- Add initial support for Dimgrey Cavefish
- Scatter/Gather display support for Renoir
- Updates for Sienna Cichlid
- Updates for Navy Flounder
- SMU7 power improvements
- Modifier support for gfx9+
- CI BACO fixes
- Arcturus SMU fixes
- Lots of code cleanups
- DC fixes
- Kernel doc fixes
- Add more GPU HW client information to page fault error logging
- MPO clock tuning for RV
- FP fixes for DCN3 on ARM and PPC
radeon:
- Expose voltage via hwmon on Sumo APUs
amdkfd:
- Fix unique id handling
- Misc fixes
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201105222749.201798-1-alexander.deucher@amd.com
fonts:
- constify font structures.
MAINTAINERS:
- Fix path for amdgpu power management
amdgpu:
- Add support for more navi1x SKUs
- Fix for suspend on CI dGPUs
- VCN DPG fix for Picasso
- Sienna Cichlid fixes
- Polaris DPM fix
- Add support for Green Sardine
amdkfd:
- Fix an allocation failure check
i915:
- Fix set domain's cache coherency
- Fixes around breadcrumbs
- Fix encoder lookup during PSR atomic
- Hold onto an explicit ref to i915_vma_work.pinned
- gvt: HWSP reset handling fix
- gvt: flush workaround
- gvt: vGPU context pin/unpin
- gvt: mmio cmd access fix for bxt/apl
imx:
- drop unused functions and callbacks
- reuse imx_drm_encoder_parse_of
- spinlock rework
- memory leak fix
- minor cleanups
vc4:
- resource cleanup fix
panfrost:
- madvise/shrinker fix
-----BEGIN PGP SIGNATURE-----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=6eUB
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2020-11-06-1' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"It's Friday here so that means another installment of drm fixes to
distract you from the counting process.
Changes all over the place, the amdgpu changes contain support for a
new GPU that is close to current one already in the tree (Green
Sardine) so it shouldn't have much side effects.
Otherwise imx has a few cleanup patches and fixes, amdgpu and i915
have around the usual smattering of fixes, fonts got constified, and
vc4/panfrost has some minor fixes. All in all a fairly regular rc3.
We have an outstanding nouveau regression, but the author is looking
into the fix, so should be here next week.
I now return you to counting.
fonts:
- constify font structures.
MAINTAINERS:
- Fix path for amdgpu power management
amdgpu:
- Add support for more navi1x SKUs
- Fix for suspend on CI dGPUs
- VCN DPG fix for Picasso
- Sienna Cichlid fixes
- Polaris DPM fix
- Add support for Green Sardine
amdkfd:
- Fix an allocation failure check
i915:
- Fix set domain's cache coherency
- Fixes around breadcrumbs
- Fix encoder lookup during PSR atomic
- Hold onto an explicit ref to i915_vma_work.pinned
- gvt: HWSP reset handling fix
- gvt: flush workaround
- gvt: vGPU context pin/unpin
- gvt: mmio cmd access fix for bxt/apl
imx:
- drop unused functions and callbacks
- reuse imx_drm_encoder_parse_of
- spinlock rework
- memory leak fix
- minor cleanups
vc4:
- resource cleanup fix
panfrost:
- madvise/shrinker fix"
* tag 'drm-fixes-2020-11-06-1' of git://anongit.freedesktop.org/drm/drm: (55 commits)
drm/amdgpu/display: remove DRM_AMD_DC_GREEN_SARDINE
drm/amd/display: Add green_sardine support to DM
drm/amd/display: Add green_sardine support to DC
drm/amdgpu: enable vcn support for green_sardine (v2)
drm/amdgpu: enable green_sardine_asd.bin loading (v2)
drm/amdgpu/sdma: add sdma engine support for green_sardine (v2)
drm/amdgpu: add gfx support for green_sardine (v2)
drm/amdgpu: add soc15 common ip block support for green_sardine (v3)
drm/amdgpu: add green_sardine support for gpu_info and ip block setting (v2)
drm/amdgpu: add Green_Sardine APU flag
drm/amdgpu: resolved ASD loading issue on sienna
amdkfd: Check kvmalloc return before memcpy
drm/amdgpu: update golden setting for sienna_cichlid
amd/amdgpu: Disable VCN DPG mode for Picasso
drm/amdgpu/swsmu: remove duplicate call to smu_set_default_dpm_table
drm/i915: Hold onto an explicit ref to i915_vma_work.pinned
drm/i915/gt: Flush xcs before tgl breadcrumbs
drm/i915/gt: Expose more parameters for emitting writes into the ring
drm/i915: Fix encoder lookup during PSR atomic check
drm/i915/gt: Use the local HWSP offset during submission
...
Add proper FP_START/END handling and adjust Makefiles per
previous asics.
v2: fix up harder.
v3: fix clkmgr Makefile for dcn30
v4: fix old gcc handling is only required for x86
Build-tested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com> (v1)
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Avoids confusion in configurations.
v2: fix build when CONFIG_DRM_AMD_DC_DCN is disabled
v3: rebase on latest code
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The change for correct asic type check
caused a psr regression due to incorrect
chip family id for Raven.
[How]
Use correct family id.
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need for a separate config option at this point.
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Display Manager support for green_sardine
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Display Core support for green_sardine
Signed-off-by: Roman Li <Roman.Li@amd.com>
Acked-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
number of warnings from the once-noisy docs build process is nearly zero.
Getting to this point has required a lot of work; once there, hopefully we
can keep things that way.
I have packaged this as a separate pull because it does a fair amount of
reaching outside of Documentation/. The changes are all in comments and in
code placement. It's all been in linux-next since last week.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl+hscQPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YgZAH/0JeDA/1VLZYYTmdABz8mjBZsoW9tyPGGztF
nsh5ykdHhL3MeTRwumW5armLVrfKhd1XT+nIzD7OcWlqu+RDOvQ5I95rahr473hP
1SHTjqm3/AlJwQoeS72X5U6QEJQ58e2IwCbP23H3x7I3Q3snEA/HhswzxurfoB/Z
j81YzDV2YPEc0LJWZ5Vn0NEdwP8cdpFv5rojsQmepq7K0yJ7tEHb7/u2cEuUBgXS
8LcYCNPLpiN+q5N8uQ5oDjIUNdLQvP03kgKtQWiCTr4BRydOrDlJie28LIedamEz
anu7UfaVK4bxn+ugRI0g2+aWQKux81ULCinKUWmLRNbcxjhaQqQ=
=hDfp
-----END PGP SIGNATURE-----
Merge tag 'docs-5.10-warnings' of git://git.lwn.net/linux
Pull documentation build warning fixes from Jonathan Corbet:
"This contains a series of warning fixes from Mauro; once applied, the
number of warnings from the once-noisy docs build process is nearly
zero.
Getting to this point has required a lot of work; once there,
hopefully we can keep things that way.
I have packaged this as a separate pull because it does a fair amount
of reaching outside of Documentation/. The changes are all in comments
and in code placement. It's all been in linux-next since last week"
* tag 'docs-5.10-warnings' of git://git.lwn.net/linux: (24 commits)
docs: SafeSetID: fix a warning
amdgpu: fix a few kernel-doc markup issues
selftests: kselftest_harness.h: fix kernel-doc markups
drm: amdgpu_dm: fix a typo
gpu: docs: amdgpu.rst: get rid of wrong kernel-doc markups
drm: amdgpu: kernel-doc: update some adev parameters
docs: fs: api-summary.rst: get rid of kernel-doc include
IB/srpt: docs: add a description for cq_size member
locking/refcount: move kernel-doc markups to the proper place
docs: lockdep-design: fix some warning issues
MAINTAINERS: fix broken doc refs due to yaml conversion
ice: docs fix a devlink info that broke a table
crypto: sun8x-ce*: update entries to its documentation
net: phy: remove kernel-doc duplication
mm: pagemap.h: fix two kernel-doc markups
blk-mq: docs: add kernel-doc description for a new struct member
docs: userspace-api: add iommu.rst to the index file
docs: hwmon: mp2975.rst: address some html build warnings
docs: net: statistics.rst: remove a duplicated kernel-doc
docs: kasan.rst: add two missing blank lines
...
Properly protect the relevant code with CONFIG_DRM_AMD_DC_DCN.
Fixes: 0b08c54bb7 ("drm/amd/display: Fix the display corruption issue on Navi10")
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix typoes.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Will expand it to other ASICs after verified.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-and-tested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Incorrect values were resulting in flash lines
when MPO was enabled and system was left idle.
[How]
Increase min clk values only when MPO is enabled
and display is active to not affect S3 power.
Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Recout calculation does not corrrectly handle plane
clip rect that extends beyond the left most border
of stream source rect. This change adds handling by
truncating the invisible clip rect.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
