Commit 8184d44c9a ("selftests/bpf: skip verifier tests for unsupported
program types") added a check to skip unsupported program types. As
bpf_probe_prog_type can change errno, do_single_test should save it before
printing a reason why a supported BPF program type failed to load.
Fixes: 8184d44c9a ("selftests/bpf: skip verifier tests for unsupported program types")
Signed-off-by: Florian Lehner <dev@der-flo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201204181828.11974-2-dev@der-flo.net
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-12-03
The main changes are:
1) Support BTF in kernel modules, from Andrii.
2) Introduce preferred busy-polling, from Björn.
3) bpf_ima_inode_hash() and bpf_bprm_opts_set() helpers, from KP Singh.
4) Memcg-based memory accounting for bpf objects, from Roman.
5) Allow bpf_{s,g}etsockopt from cgroup bind{4,6} hooks, from Stanislav.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (118 commits)
selftests/bpf: Fix invalid use of strncat in test_sockmap
libbpf: Use memcpy instead of strncpy to please GCC
selftests/bpf: Add fentry/fexit/fmod_ret selftest for kernel module
selftests/bpf: Add tp_btf CO-RE reloc test for modules
libbpf: Support attachment of BPF tracing programs to kernel modules
libbpf: Factor out low-level BPF program loading helper
bpf: Allow to specify kernel module BTFs when attaching BPF programs
bpf: Remove hard-coded btf_vmlinux assumption from BPF verifier
selftests/bpf: Add CO-RE relocs selftest relying on kernel module BTF
selftests/bpf: Add support for marking sub-tests as skipped
selftests/bpf: Add bpf_testmod kernel module for testing
libbpf: Add kernel module BTF support for CO-RE relocations
libbpf: Refactor CO-RE relocs to not assume a single BTF object
libbpf: Add internal helper to load BTF data by FD
bpf: Keep module's btf_data_size intact after load
bpf: Fix bpf_put_raw_tracepoint()'s use of __module_address()
selftests/bpf: Add Userspace tests for TCP_WINDOW_CLAMP
bpf: Adds support for setting window clamp
samples/bpf: Fix spelling mistake "recieving" -> "receiving"
bpf: Fix cold build of test_progs-no_alu32
...
====================
Link: https://lore.kernel.org/r/20201204021936.85653-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
check that close_range(initial_fd, last_fd, CLOSE_RANGE_CLOEXEC)
correctly sets the close-on-exec bit for the specified file
descriptors.
Open 100 file descriptors and set the close-on-exec flag for a subset
of them first, then set it for every file descriptor above 2. Make
sure RLIMIT_NOFILE doesn't affect the result.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Link: https://lore.kernel.org/r/20201118104746.873084-3-gscrivan@redhat.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
strncat()'s third argument is how many bytes will be added *in addition* to
already existing bytes in destination. Plus extra zero byte will be added
after that. So existing use in test_sockmap has many opportunities to overflow
the string and cause memory corruptions. And in this case, GCC complains for
a good reason.
Fixes: 16962b2404 ("bpf: sockmap, add selftests")
Fixes: 73563aa3d9 ("selftests/bpf: test_sockmap, print additional test options")
Fixes: 1ade9abadf ("bpf: test_sockmap, add options for msg_pop_data() helper")
Fixes: 463bac5f1c ("bpf, selftests: Add test for ktls with skb bpf ingress policy")
Fixes: e9dd904708 ("bpf: add tls support for testing in test_sockmap")
Fixes: 753fb2ee09 ("bpf: sockmap, add msg_peek tests to test_sockmap")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201203235440.2302137-2-andrii@kernel.org
Add a self-tests validating libbpf is able to perform CO-RE relocations
against the type defined in kernel module BTF. if bpf_testmod.o is not
supported by the kernel (e.g., due to version mismatch), skip tests, instead
of failing.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-9-andrii@kernel.org
Add bpf_testmod module, which is conceptually out-of-tree module and provides
ways for selftests/bpf to test various kernel module-related functionality:
raw tracepoint, fentry/fexit/fmod_ret, etc. This module will be auto-loaded by
test_progs test runner and expected by some of selftests to be present and
loaded.
Pahole currently isn't able to generate BTF for static functions in kernel
modules, so make sure traced function is global.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-7-andrii@kernel.org
losetup on busybox does not output the name of loop device on using
-f with --show. It also doesn't support -j to find the loop devices
for a given backing file. losetup is updated to use "-a" which is
available on busybox.
blkid does not support options (-s and -o) to only display the uuid, so
parse the output instead.
Not all environments have mkfs.ext4, the test requires a loop device
with a backing image file which could formatted with any filesystem.
Update to using mkfs.ext2 which is available on busybox.
Fixes: 34b82d3ac1 ("bpf: Add a selftest for bpf_ima_inode_hash")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201203191437.666737-2-kpsingh@chromium.org
Splice (copy_file_range) doesn't work on all filesystems. I'm running
test kernels on top of my read-only disk image and it uses plan9 under the
hood. This prevents test_local_storage from successfully passing.
There is really no technical reason to use splice, so lets do
old-school read/write to copy file; this should work in all
environments.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201202174947.3621989-1-sdf@google.com
The current memory region move test correctly handles the situation that
the second (realigning) memslot move operation would temporarily trigger
MMIO until it completes, however it does not handle the case in which the
first (misaligning) move operation does this, too.
This results in false test assertions in case it does so.
Fix this by handling temporary MMIO from the first memslot move operation
in the test guest code, too.
Fixes: 8a0639fe92 ("KVM: sefltests: Add explicit synchronization to move mem region test")
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <0fdddb94bb0e31b7da129a809a308d91c10c0b5e.1606941224.git.maciej.szmigiero@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Patch fixes uninitialized variable warning in bad_accesses test
which causes the selftests build to fail in older distibutions
bad_accesses.c: In function ‘bad_access’:
bad_accesses.c:52:9: error: ‘x’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
printf("Bad - no SEGV! (%c)\n", x);
^
cc1: all warnings being treated as errors
Signed-off-by: Harish <harish@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201201092403.238182-1-harish@linux.ibm.com
Remove rlimit-based accounting infrastructure code, which is not used
anymore.
To provide a backward compatibility, use an approximation of the
bpf map memory footprint as a "memlock" value, available to a user
via map info. The approximation is based on the maximal number of
elements and key and value sizes.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201201215900.3569844-33-guro@fb.com
This is the patch I'm using to evaluate the impact syscall user dispatch
has on native syscall (syscalls not redirected to userspace) when
enabled for the process and submiting syscalls though the unblocked
dispatch selector. It works by running a step to define a baseline of
the cost of executing sysinfo, then enabling SUD, and rerunning that
step.
On my test machine, an AMD Ryzen 5 1500X, I have the following results
with the latest version of syscall user dispatch patches.
root@olga:~# syscall_user_dispatch/sud_benchmark
Calibrating test set to last ~5 seconds...
test iterations = 37500000
Avg syscall time 134ns.
Caught sys_ff00
trapped_call_count 1, native_call_count 0.
Avg syscall time 147ns.
Interception overhead: 9.7% (+13ns).
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20201127193238.821364-7-krisman@collabora.com
Avoid occasional test failures due to the last sample being delayed to
another ring_buffer__poll() call. Instead, drain samples completely with
ring_buffer__consume(). This is supposed to fix a rare and non-deterministic
test failure in libbpf CI.
Fixes: cb1c9ddd55 ("selftests/bpf: Add BPF ringbuf selftests")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201130223336.904192-2-andrii@kernel.org
Fix ring_buffer__poll() to return the number of non-discarded records
consumed, just like its documentation states. It's also consistent with
ring_buffer__consume() return. Fix up selftests with wrong expected results.
Fixes: bf99c936f9 ("libbpf: Add BPF ring buffer support")
Fixes: cb1c9ddd55 ("selftests/bpf: Add BPF ringbuf selftests")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201130223336.904192-1-andrii@kernel.org
Test that each veto that was added in the previous patch, is indeed
vetoed.
$ ./q_in_q_veto.sh
TEST: create 802.1ad vlan upper on top of a front panel [ OK ]
TEST: create 802.1ad vlan upper on top of a bridge port [ OK ]
TEST: create 802.1ad vlan upper on top of a lag [ OK ]
TEST: create 802.1ad vlan upper on top 802.1q bridge [ OK ]
TEST: create 802.1ad vlan upper on top 802.1ad bridge [ OK ]
TEST: create 802.1q vlan upper on top 802.1ad bridge [ OK ]
TEST: create vlan upper on top of front panel enslaved to 802.1ad bridge
[ OK ]
TEST: create vlan upper on top of lag enslaved to 802.1ad bridge [ OK ]
TEST: enslave front panel with vlan upper to 802.1ad bridge [ OK ]
TEST: enslave lag with vlan upper to 802.1ad bridge [ OK ]
TEST: IP address addition to 802.1ad bridge [ OK ]
TEST: switch bridge protocol [ OK ]
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Flavored variants of test_progs (e.g. test_progs-no_alu32) change their
working directory to the corresponding subdirectory (e.g. no_alu32).
Since the setup script required by test_ima (ima_setup.sh) is not
mentioned in the dependencies, it does not get copied to these
subdirectories and causes flavored variants of test_ima to fail.
Adding the script to TRUNNER_EXTRA_FILES ensures that the file is also
copied to the subdirectories for the flavored variants of test_progs.
Fixes: 34b82d3ac1 ("bpf: Add a selftest for bpf_ima_inode_hash")
Reported-by: Yonghong Song <yhs@fb.com>
Suggested-by: Yonghong Song <yhs@fb.com>
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20201126184946.1708213-1-kpsingh@chromium.org
The logic for truncating the log file for emailing based on the
MAIL_MAX_SIZE option is confusing and incorrect. Simplify it and have the
tail of the log file truncated to the max size specified in the config.
Cc: stable@vger.kernel.org
Fixes: 855d8abd2e ("ktest.pl: Change the logic to control the size of the log file emailed")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
If the size of the error log is too big to send via email, and the sending
fails, it wont email any result. This can be confusing for the user who is
waiting for an email on the completion of the tests.
If it fails to send email, then try again without the log file stating that
it failed to send an email. Obviously this will not be of use if the sending
of email failed for some other reasons, but it will at least give the user
some information when it fails for the most common reason.
Cc: stable@vger.kernel.org
Fixes: c2d84ddb33 ("ktest.pl: Add MAIL_COMMAND option to define how to send email")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This issue was first noticed when I was testing different kernels on
Oracle Linux 8 which as Fedora 30+ adopts BLS as default. Even though a
kernel entry was added successfully and the index of that kernel entry was
retrieved correctly, ktest still wouldn't reboot the system into
user-specified kernel.
The bug was spotted in subroutine reboot_to where the if-statement never
checks for REBOOT_TYPE "grub2bls", therefore the desired entry will not be
set for the next boot.
Add a check for "grub2bls" so that $grub_reboot $grub_number can
be run before a reboot if REBOOT_TYPE is "grub2bls" then we can boot to
the correct kernel.
Link: https://lkml.kernel.org/r/20201121021243.1532477-1-libo.chen@oracle.com
Cc: stable@vger.kernel.org
Fixes: ac2466456e ("ktest: introduce grub2bls REBOOT_TYPE option")
Signed-off-by: Libo Chen <libo.chen@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Trivial conflict in CAN, keep the net-next + the byteswap wrapper.
Conflicts:
drivers/net/can/usb/gs_usb.c
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add new cipher as a variant of standard tls selftests
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
DEMUX register presence depends on the host's hardware (the
CLIDR_EL1 register to be precise). This means there's no set
of them that we can bless and that it's possible to encounter
new ones when running on different hardware (which would
generate "Consider adding them ..." messages, but we'll never
want to add them.)
Remove the ones we have in the blessed list and filter them
out of the new list, but also provide a new command line switch
to list them if one so desires.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201126134641.35231-3-drjones@redhat.com
This patch provides the test application for DMA_MAP_BENCHMARK.
Before running the test application, we need to bind a device to dma_map_
benchmark driver. For example, unbind "xxx" from its original driver and
bind to dma_map_benchmark:
echo dma_map_benchmark > /sys/bus/platform/devices/xxx/driver_override
echo xxx > /sys/bus/platform/drivers/xxx/unbind
echo xxx > /sys/bus/platform/drivers/dma_map_benchmark/bind
Another example for PCI devices:
echo dma_map_benchmark > /sys/bus/pci/devices/0000:00:01.0/driver_override
echo 0000:00:01.0 > /sys/bus/pci/drivers/xxx/unbind
echo 0000:00:01.0 > /sys/bus/pci/drivers/dma_map_benchmark/bind
The below command will run 16 threads on numa node 0 for 10 seconds on
the device bound to dma_map_benchmark platform_driver or pci_driver:
./dma_map_benchmark -t 16 -s 10 -n 0
dma mapping benchmark: threads:16 seconds:10
average map latency(us):1.1 standard deviation:1.9
average unmap latency(us):0.5 standard deviation:0.8
Cc: Will Deacon <will@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Before this patch, profiler.inc.h wouldn't compile with clang-11 (before
the __builtin_preserve_enum_value LLVM builtin was introduced in
https://reviews.llvm.org/D83242).
Another test that uses this builtin (test_core_enumval) is conditionally
skipped if the compiler is too old. In that spirit, this patch inhibits
part of populate_cgroup_info(), which needs this CO-RE builtin. The
selftests build again on clang-11.
The affected test (the profiler test) doesn't pass on clang-11 because
it's missing https://reviews.llvm.org/D85570, but at least the test suite
as a whole compiles. The test's expected failure is already called out in
the README.
Signed-off-by: Andrei Matei <andreimatei1@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Florian Lehner <dev@der-flo.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20201125035255.17970-1-andreimatei1@gmail.com
The test does the following:
- Mounts a loopback filesystem and appends the IMA policy to measure
executions only on this file-system. Restricting the IMA policy to
a particular filesystem prevents a system-wide IMA policy change.
- Executes an executable copied to this loopback filesystem.
- Calls the bpf_ima_inode_hash in the bprm_committed_creds hook and
checks if the call succeeded and checks if a hash was calculated.
The test shells out to the added ima_setup.sh script as the setup is
better handled in a shell script and is more complicated to do in the
test program or even shelling out individual commands from C.
The list of required configs (i.e. IMA, SECURITYFS,
IMA_{WRITE,READ}_POLICY) for running this test are also updated.
Suggested-by: Mimi Zohar <zohar@linux.ibm.com> (limit policy rule to loopback mount)
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20201124151210.1081188-4-kpsingh@chromium.org
Test that packets hitting a blackhole nexthop are trapped to the CPU
when the trap is enabled. Test that packets are not reported when the
trap is disabled.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test that IPv4 and IPv6 ping fail when the route is using a blackhole
nexthop or a group with a blackhole nexthop. Test that ping passes when
the route starts using a valid nexthop.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test the mlxsw allows blackhole nexthops to be installed and that the
nexthops are marked as offloaded.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
