Pull irq updates from Thomas Gleixner:
"This is the second attempt after the first one failed miserably and
got zapped to unblock the rest of the interrupt related patches.
A treewide cleanup of interrupt descriptor (ab)use with all sorts of
racy accesses, inefficient and disfunctional code. The goal is to
remove the export of irq_to_desc() to prevent these things from
creeping up again"
* tag 'irq-core-2020-12-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
genirq: Restrict export of irq_to_desc()
xen/events: Implement irq distribution
xen/events: Reduce irq_info:: Spurious_cnt storage size
xen/events: Only force affinity mask for percpu interrupts
xen/events: Use immediate affinity setting
xen/events: Remove disfunct affinity spreading
xen/events: Remove unused bind_evtchn_to_irq_lateeoi()
net/mlx5: Use effective interrupt affinity
net/mlx5: Replace irq_to_desc() abuse
net/mlx4: Use effective interrupt affinity
net/mlx4: Replace irq_to_desc() abuse
PCI: mobiveil: Use irq_data_get_irq_chip_data()
PCI: xilinx-nwl: Use irq_data_get_irq_chip_data()
NTB/msi: Use irq_has_action()
mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc
pinctrl: nomadik: Use irq_has_action()
drm/i915/pmu: Replace open coded kstat_irqs() copy
drm/i915/lpe_audio: Remove pointless irq_to_desc() usage
s390/irq: Use irq_desc_kstat_cpu() in show_msi_interrupt()
parisc/irq: Use irq_desc_kstat_cpu() in show_interrupts()
...
Pull EFI updates from Borislav Petkov:
"These got delayed due to a last minute ia64 build issue which got
fixed in the meantime.
EFI updates collected by Ard Biesheuvel:
- Don't move BSS section around pointlessly in the x86 decompressor
- Refactor helper for discovering the EFI secure boot mode
- Wire up EFI secure boot to IMA for arm64
- Some fixes for the capsule loader
- Expose the RT_PROP table via the EFI test module
- Relax DT and kernel placement restrictions on ARM
with a few followup fixes:
- fix the build breakage on IA64 caused by recent capsule loader
changes
- suppress a type mismatch build warning in the expansion of
EFI_PHYS_ALIGN on ARM"
* tag 'efi_updates_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: arm: force use of unsigned type for EFI_PHYS_ALIGN
efi: ia64: disable the capsule loader
efi: stub: get rid of efi_get_max_fdt_addr()
efi/efi_test: read RuntimeServicesSupported
efi: arm: reduce minimum alignment of uncompressed kernel
efi: capsule: clean scatter-gather entries from the D-cache
efi: capsule: use atomic kmap for transient sglist mappings
efi: x86/xen: switch to efi_get_secureboot_mode helper
arm64/ima: add ima_arch support
ima: generalize x86/EFI arch glue for other EFI architectures
efi: generalize efi_get_secureboot
efi/libstub: EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER should not default to yes
efi/x86: Only copy the compressed kernel image in efi_relocate_kernel()
efi/libstub/x86: simplify efi_is_native()
Pull ARM updates from Russell King:
- Rework phys/virt translation
- Add KASan support
- Move DT out of linear map region
- Use more PC-relative addressing in assembly
- Remove FP emulation handling while in kernel mode
- Link with '-z norelro'
- remove old check for GCC <= 4.2 in ARM unwinder code
- disable big endian if using clang's linker
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (46 commits)
ARM: 9027/1: head.S: explicitly map DT even if it lives in the first physical section
ARM: 9038/1: Link with '-z norelro'
ARM: 9037/1: uncompress: Add OF_DT_MAGIC macro
ARM: 9036/1: uncompress: Fix dbgadtb size parameter name
ARM: 9035/1: uncompress: Add be32tocpu macro
ARM: 9033/1: arm/smp: Drop the macro S(x,s)
ARM: 9032/1: arm/mm: Convert PUD level pgtable helper macros into functions
ARM: 9031/1: hyp-stub: remove unused .L__boot_cpu_mode_offset symbol
ARM: 9044/1: vfp: use undef hook for VFP support detection
ARM: 9034/1: __div64_32(): straighten up inline asm constraints
ARM: 9030/1: entry: omit FP emulation for UND exceptions taken in kernel mode
ARM: 9029/1: Make iwmmxt.S support Clang's integrated assembler
ARM: 9028/1: disable KASAN in call stack capturing routines
ARM: 9026/1: unwind: remove old check for GCC <= 4.2
ARM: 9025/1: Kconfig: CPU_BIG_ENDIAN depends on !LD_IS_LLD
ARM: 9024/1: Drop useless cast of "u64" to "long long"
ARM: 9023/1: Spelling s/mmeory/memory/
ARM: 9022/1: Change arch/arm/lib/mem*.S to use WEAK instead of .weak
ARM: kvm: replace open coded VA->PA calculations with adr_l call
ARM: head.S: use PC relative insn sequence to calculate PHYS_OFFSET
...
The early ATAGS/DT mapping code uses SECTION_SHIFT to mask low order
bits of R2, and decides that no ATAGS/DTB were provided if the resulting
value is 0x0.
This means that on systems where DRAM starts at 0x0 (such as Raspberry
Pi), no explicit mapping of the DT will be created if R2 points into the
first 1 MB section of memory. This was not a problem before, because the
decompressed kernel is loaded at the base of DRAM and mapped using
sections as well, and so as long as the DT is referenced via a virtual
address that uses the same translation (the linear map, in this case),
things work fine.
However, commit 7a1be318f5 ("9012/1: move device tree mapping out of
linear region") changes this, and now the DT is referenced via a virtual
address that is disjoint from the linear mapping of DRAM, and so we need
the early code to create the DT mapping unconditionally.
So let's create the early DT mapping for any value of R2 != 0x0.
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
When linking a multi_v7_defconfig + CONFIG_KASAN=y kernel with
LD=ld.lld, the following error occurs:
$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- LLVM=1 zImage
ld.lld: error: section: .exit.data is not contiguous with other relro sections
LLD defaults to '-z relro', which is unneeded for the kernel because
program headers are not used nor is there any position independent code
generation or linking for ARM. Add '-z norelro' to LDFLAGS_vmlinux to
avoid this error.
Link: https://github.com/ClangBuiltLinux/linux/issues/1189
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
The DTB magic marker is stored as a 32-bit big-endian value, and thus
depends on the CPU's endianness. Add a macro to define this value in
native endianness, to reduce #ifdef clutter and (future) duplication.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
DTB stores all values as 32-bit big-endian integers.
Add a macro to convert such values to native CPU endianness, to reduce
duplication.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Commit aaac373317 ("ARM: kvm: replace open coded VA->PA calculations
with adr_l call") removed all uses of .L__boot_cpu_mode_offset, so there
is no longer a need to define it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Commit f77ac2e378 ("ARM: 9030/1: entry: omit FP emulation for UND
exceptions taken in kernel mode") failed to take into account that there
is in fact a case where we relied on this code path: during boot, the
VFP detection code issues a read of FPSID, which will trigger an undef
exception on cores that lack VFP support.
So let's reinstate this logic using an undef hook which is registered
only for the duration of the initcall to vpf_init(), and which sets
VFP_arch to a non-zero value - as before - if no VFP support is present.
Fixes: f77ac2e378 ("ARM: 9030/1: entry: omit FP emulation for UND ...")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Pull power supply and reset updates from Sebastian Reichel:
"Battery/charger driver changes:
- collie_battery, generic-adc-battery, s3c-adc-battery: convert to
GPIO descriptors (incl ARM board files)
- misc cleanup and fixes
Reset drivers:
- new poweroff driver for force disabling a regulator
- use printk format symbol resolver
- ocelot: add support for Luton and Jaguar2"
* tag 'for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (31 commits)
power: supply: Fix a typo in warning message
Documentation: DT: binding documentation for regulator-poweroff
power: reset: new driver regulator-poweroff
power: supply: ab8500: Use dev_err_probe() for IIO channels
power: supply: ab8500_fg: Request all IRQs as threaded
power: supply: ab8500_charger: Oneshot threaded IRQs
power: supply: ab8500: Convert to dev_pm_ops
power: supply: ab8500: Use local helper
power: supply: wm831x_power: remove unneeded break
power: supply: bq24735: Drop unused include
power: supply: bq24190_charger: Drop unused include
power: supply: generic-adc-battery: Use GPIO descriptors
power: supply: collie_battery: Convert to GPIO descriptors
power: supply: bq24190_charger: fix reference leak
power: supply: s3c-adc-battery: Convert to GPIO descriptors
power: reset: Use printk format symbol resolver
power: supply: axp20x_usb_power: Use power efficient workqueue for debounce
power: supply: axp20x_usb_power: fix typo
power: supply: max8997-charger: Improve getting charger status
power: supply: max8997-charger: Fix platform data retrieval
...
Merge still more updates from Andrew Morton:
"18 patches.
Subsystems affected by this patch series: mm (memcg and cleanups) and
epoll"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/Kconfig: fix spelling mistake "whats" -> "what's"
selftests/filesystems: expand epoll with epoll_pwait2
epoll: wire up syscall epoll_pwait2
epoll: add syscall epoll_pwait2
epoll: convert internal api to timespec64
epoll: eliminate unnecessary lock for zero timeout
epoll: replace gotos with a proper loop
epoll: pull all code between fetch_events and send_event into the loop
epoll: simplify and optimize busy loop logic
epoll: move eavail next to the list_empty_careful check
epoll: pull fatal signal checks into ep_send_events()
epoll: simplify signal handling
epoll: check for events when removing a timed out thread from the wait queue
mm/memcontrol:rewrite mem_cgroup_page_lruvec()
mm, kvm: account kvm_vcpu_mmap to kmemcg
mm/memcg: remove unused definitions
mm/memcg: warning on !memcg after readahead page charged
mm/memcg: bail early from swap accounting if memcg disabled
Pull RISC-V updates from Palmer Dabbelt:
"We have a handful of new kernel features for 5.11:
- Support for the contiguous memory allocator.
- Support for IRQ Time Accounting
- Support for stack tracing
- Support for strict /dev/mem
- Support for kernel section protection
I'm being a bit conservative on the cutoff for this round due to the
timing, so this is all the new development I'm going to take for this
cycle (even if some of it probably normally would have been OK). There
are, however, some fixes on the list that I will likely be sending
along either later this week or early next week.
There is one issue in here: one of my test configurations
(PREEMPT{,_DEBUG}=y) fails to boot on QEMU 5.0.0 (from April) as of
the .text.init alignment patch.
With any luck we'll sort out the issue, but given how many bugs get
fixed all over the place and how unrelated those features seem my
guess is that we're just running into something that's been lurking
for a while and has already been fixed in the newer QEMU (though I
wouldn't be surprised if it's one of these implicit assumptions we
have in the boot flow). If it was hardware I'd be strongly inclined to
look more closely, but given that users can upgrade their simulators
I'm less worried about it"
* tag 'riscv-for-linus-5.11-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
arm64: Use the generic devmem_is_allowed()
arm: Use the generic devmem_is_allowed()
RISC-V: Use the new generic devmem_is_allowed()
lib: Add a generic version of devmem_is_allowed()
riscv: Fixed kernel test robot warning
riscv: kernel: Drop unused clean rule
riscv: provide memmove implementation
RISC-V: Move dynamic relocation section under __init
RISC-V: Protect all kernel sections including init early
RISC-V: Align the .init.text section
RISC-V: Initialize SBI early
riscv: Enable ARCH_STACKWALK
riscv: Make stack walk callback consistent with generic code
riscv: Cleanup stacktrace
riscv: Add HAVE_IRQ_TIME_ACCOUNTING
riscv: Enable CMA support
riscv: Ignore Image.* and loader.bin
riscv: Clean up boot dir
riscv: Fix compressed Image formats build
RISC-V: Add kernel image sections to the resource tree
Pull ARM SoC OMAP GenPD updates from Arnd Bergmann:
"These are additional updates for the power domain support on OMAP,
moving to an implementation based on device tree information instead
of SoC specific code. This is the latest step in the ongoing process
for moving code out of arch/arm/mach-omap2.
I kept this separate from the other driver changes since it touches
code in multiple areas"
* tag 'arm-soc-omap-genpd-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (51 commits)
ARM: OMAP2+: Fix am4 only build after genpd changes
ARM: dts: Configure power domain for omap5 dss
ARM: dts: omap5: add remaining PRM instances
soc: ti: omap-prm: omap5: add genpd support for remaining PRM instances
ARM: OMAP2+: Drop legacy platform data for dra7 gpmc
ARM: dts: Configure interconnect target module for dra7 iva
ARM: dts: dra7: add remaining PRM instances
soc: ti: omap-prm: dra7: add genpd support for remaining PRM instances
clk: ti: dra7: Drop idlest polling from IVA clkctrl clocks
ARM: OMAP2+: Drop legacy platform data for omap4 gpmc
ARM: OMAP2+: Drop legacy platform data for omap4 iva
ARM: dts: Configure power domain for omap4 dsp
ARM: dts: Configure power domain for omap4 dss
ARM: dts: omap4: add remaining PRM instances
soc: ti: omap-prm: omap4: add genpd support for remaining PRM instances
clk: ti: omap4: Drop idlest polling from IVA clkctrl clocks
ARM: OMAP2+: Drop legacy remaining legacy platform data for am4
ARM: dts: Use simple-pm-bus for genpd for am4 l3
ARM: dts: Move am4 l3 noc to a separate node
ARM: dts: Use simple-pm-bus for genpd for am4 l4_per
...
Pull ARM SoC driver updates from Arnd Bergmann:
"There are a couple of subsystems maintained by other people that merge
their drivers through the SoC tree, those changes include:
- The SCMI firmware framework gains support for sensor notifications
and for controlling voltage domains.
- A large update for the Tegra memory controller driver, integrating
it better with the interconnect framework
- The memory controller subsystem gains support for Mediatek MT8192
- The reset controller framework gains support for sharing pulsed
resets
For Soc specific drivers in drivers/soc, the main changes are
- The Allwinner/sunxi MBUS gets a rework for the way it handles
dma_map_ops and offsets between physical and dma address spaces.
- An errata fix plus some cleanups for Freescale Layerscape SoCs
- A cleanup for renesas drivers regarding MMIO accesses.
- New SoC specific drivers for Mediatek MT8192 and MT8183 power
domains
- New SoC specific drivers for Aspeed AST2600 LPC bus control and SoC
identification.
- Core Power Domain support for Qualcomm MSM8916, MSM8939, SDM660 and
SDX55.
- A rework of the TI AM33xx 'genpd' power domain support to use
information from DT instead of platform data
- Support for TI AM64x SoCs
- Allow building some Amlogic drivers as modules instead of built-in
Finally, there are numerous cleanups and smaller bug fixes for
Mediatek, Tegra, Samsung, Qualcomm, TI OMAP, Amlogic, Rockchips,
Renesas, and Xilinx SoCs"
* tag 'arm-soc-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (222 commits)
soc: mediatek: mmsys: Specify HAS_IOMEM dependency for MTK_MMSYS
firmware: xilinx: Properly align function parameter
firmware: xilinx: Add a blank line after function declaration
firmware: xilinx: Remove additional newline
firmware: xilinx: Fix kernel-doc warnings
firmware: xlnx-zynqmp: fix compilation warning
soc: xilinx: vcu: add missing register NUM_CORE
soc: xilinx: vcu: use vcu-settings syscon registers
dt-bindings: soc: xlnx: extract xlnx, vcu-settings to separate binding
soc: xilinx: vcu: drop useless success message
clk: samsung: mark PM functions as __maybe_unused
soc: samsung: exynos-chipid: initialize later - with arch_initcall
soc: samsung: exynos-chipid: order list of SoCs by name
memory: jz4780_nemc: Fix potential NULL dereference in jz4780_nemc_probe()
memory: ti-emif-sram: only build for ARMv7
memory: tegra30: Support interconnect framework
memory: tegra20: Support hardware versioning and clean up OPP table initialization
dt-bindings: memory: tegra20-emc: Document opp-supported-hw property
soc: rockchip: io-domain: Fix error return code in rockchip_iodomain_probe()
reset-controller: ti: force the write operation when assert or deassert
...
Pull ARM device tree updates from Arnd Bergmann:
"Across all platforms, there is a continued move towards DT schema for
validating the dts files. As a result there are bug fixes for mistakes
that are found using these schema, in addition to warnings from the
dtc compiler.
As usual, many changes are for adding support for additional on-chip
and on-board components in the machines we already support.
The newly supported SoCs for this release are:
- MStar Infinity2M, a low-end IP camera chip based on a dual-core
Cortex-A7, otherwise similar to the Infinity chip we already
support. This is also known as the SigmaStar SSD202D, and we add
support for the Honestar ssd201htv2 development kit.
- Nuvoton NPCM730, a Cortex-A9 based Baseboard Management Controller
(BMC), in the same family as the NPCM750. This gets used in the
Ampere Altra based "Fii Kudo" server and the Quanta GSJ, both of
which are added as well.
- Broadcom BCM4908, a 64-bit home router chip based on Broadcom's own
Brahma-B53 CPU. Support is also added for the Asus ROG Rapture
GT-AC5300 high-end WiFi router based on this chip.
- Mediatek MT8192 is a new SoC based on eight Cortex-A76/A55 cores,
meant for faster Chromebooks and tablets. It gets added along with
its reference design.
- Mediatek MT6779 (Helio P90) is a high-end phone chip from last
year's generation, also added along with its reference board. This
one is still based on Cortex-A75/A55.
- Mediatek MT8167 is a version of the already supported MT8516 chip,
both based on Cortex-A35. It gets added along with the "Pumpkin"
single board computer, but is likely to also make its way into
low-end tablets in the future.
For the already supported chips, there are a number of new boards.
Interestingly there are more 32-bit machines added this time than
64-bit. Here is a brief list of the new boards:
- Three new Mikrotik router variants based on Marvell Prestera
98DX3236, a close relative of the more common Armada XP
- A reference board for the Marvell Armada 382
- Three new servers using ASpeed baseboard management controllers,
the actual machines being from Bytedance, Facebook and IBM, and one
machine using the Nuvoton NPCM750 BMC.
- The Galaxy Note 10.1 (P4) tablet, using an Exynos 4412.
- The usual set of 32-bit i.MX industrial/embedded hardware:
* Protonic WD3 (tractor e-cockpit)
* Kamstrup OMNIA Flex Concentrator (smart grid platform)
* Van der Laan LANMCU (food storage)
* Altesco I6P (vehicle inspection stations)
* PHYTEC phyBOARD-Segin/phyCORE-i.MX6UL baseboard
- DH electronics STM32MP157C DHCOM, a PicoITX carrier board for the
aleady supported DHCOM module
- Three new Allwinner SoC based single-board computers:
* NanoPi R1 (H3 based)
* FriendlyArm ZeroPi (H3 based)
* Elimo Initium SBC (S3 based)
- Ouya Game Console based on Nvidia Tegra 3
- Version 5 of the already supported Zynq Z-Turn MYIR Board
- LX2162AQDS, a reference platform for NXP Layerscape LX2162A, which
is a repackaged 16-core LX2160A
- A series of Kontron i.MX8M Mini baseboard/SoM versions
- Espressobin Ultra, a new variant of the popular Armada 3700 based
board,
- IEI Puzzle-M801, a rackmount network appliance based on Marvell
Armada 8040
- Microsoft Lumia 950 XL, a phone
- HDK855 and HDK865 Hardware development kits for Qualcomm sm8250 and
sm8150, respectively
- Three new board variants of the "Trogdor" Chromebook (sc7180)
- New board variants of the Renesas based "Kingfisher" and "HiHope"
reference boards
- Kobol Helios64, an open source NAS appliance based on Rockchips
RK3399
- Engicam PX30.Core, a SoM based on Rockchip PX30, along with a few
carrier boards"
* tag 'arm-soc-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (679 commits)
arm64: dts: sparx5: Add SGPIO devices
arm64: dts: sparx5: Add reset support
dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver
ARM: mstar: SMP support
ARM: mstar: Wire up smpctrl for SSD201/SSD202D
ARM: mstar: Add smp ctrl registers to infinity2m dtsi
ARM: mstar: Add dts for Honestar ssd201htv2
ARM: mstar: Add chip level dtsi for SSD202D
ARM: mstar: Add common dtsi for SSD201/SSD202D
ARM: mstar: Add infinity2m support
dt-bindings: mstar: Add Honestar SSD201_HT_V2 to mstar boards
dt-bindings: vendor-prefixes: Add honestar vendor prefix
dt-bindings: mstar: Add binding details for mstar,smpctrl
ARM: mstar: Fill in GPIO controller properties for infinity
ARM: mstar: Add gpio controller to MStar base dtsi
ARM: zynq: Fix incorrect reference to XM013 instead of XM011
ARM: zynq: Convert at25 binding to new description on zc770-xm013
ARM: zynq: Fix OCM mapping to be aligned with binding on zc702
ARM: zynq: Fix leds subnode name for zc702/zybo-z7
ARM: zynq: Rename bus to be align with simple-bus yaml
...
Pull ARM SoC defconfig updates from Arnd Bergmann:
"These are the usual defconfig updates, adding support for additional
modules and updating some files according to changes in Kconfig.
I also include the removal of CONFIG_BACKLIGHT_GENERIC across multiple
architectures, after the driver was removed"
* tag 'arm-soc-defconfig-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (41 commits)
powerpc/configs: drop unused BACKLIGHT_GENERIC option
parisc: configs: drop unused BACKLIGHT_GENERIC option
arm64: defconfig: drop unused BACKLIGHT_GENERIC option
ARM: configs: drop unused BACKLIGHT_GENERIC option
arm64: defconfig: Enable more Librem 5 hardware
arm64: defconfig: Enable RTC_DRV_HYM8563
arm64: defconfig: Enable USB_SERIAL_CP210X
arm64: defconfig: Enable PHY_ROCKCHIP_INNO_DSIDPHY
arm64: defconfig: Enable ROCKCHIP_LVDS
arm64: defconfig: Enable ARM SCMI protocol and drivers
ARM: multi_v7_defconfig: Enable ARM SCMI protocol and drivers
ARM: multi_v7_defconfig: enable STM32 dfsdm audio support
ARM: multi_v7_defconfig: enable STM32 spdifrx support
ARM: multi_v7_defconfig: enable STUSB160X Type-C port controller support
ARM: multi_v7_defconfig: add STM32 crypto support
ARM: multi_v7_defconfig: enable counter subsystem and stm32 counter drivers
ARM: multi_v7_defconfig: make Samsung Exynos EHCI driver a module
arm64: defconfig: Enable Qualcomm PON driver
ARM: omap2plus_defconfig: Enable TI eQEP counter driver
ARM: multi_v7_defconfig: ti: Enable networking options for nfs boot
...
Pull ARM SoC updates from Arnd Bergmann:
"These are updates for SoC specific code, mostly in the 32-bit
architecture:
- A rework for handling MMIO accesses in Renesas SoCs in a more
portable way
- Updates to SoC version detection in NXP i.MX SoCs.
- Smaller bug fixes for OMAP, Samsung, Marvell, Amlogic"
* tag 'arm-soc-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
arm64: Kconfig: meson: drop pinctrl
ARM: mxs: Add serial number support for i.MX23, i.MX28 SoCs
MAINTAINERS: switch mvebu tree to kernel.org
MAINTAINERS: Add an entry for MikroTik CRS3xx 98DX3236 boards
ARM: shmobile: Stop using __raw_*() I/O accessors
ARM: shmobile: sh73a0: Remove obsolete static mapping
ARM: shmobile: sh73a0: Use ioremap() to map SMP registers
ARM: shmobile: sh73a0: Use ioremap() to map L2C registers
ARM: shmobile: r8a7779: Remove obsolete static mappings
ARM: shmobile: r8a7779: Use ioremap() to map SMP registers
ARM: shmobile: r8a7779: Use ioremap() to map INTC2 registers
ARM: shmobile: r8a7778: Introduce HPBREG_BASE
ARM: OMAP1: clock: Use IS_ERR_OR_NULL() to clean code
ARM: OMAP2+: Remove redundant null check before clk_prepare_enable/clk_disable_unprepare
ARM: OMAP2+: Remove redundant assignment to variable ret
ARM: OMAP2+: Fix kfree NULL pointer in omap2xxx_clkt_vps_init
ARM: OMAP2+: Fix memleak in omap2xxx_clkt_vps_init
ARM: exynos: extend cpuidle support to P4 Note boards
ARM: imx: mach-imx6q: correctly identify i.MX6QP SoCs
ARM: imx: imx7ulp: Add a comment explaining the B2 silicon version
...
Pull devicetree updates from Rob Herring:
- Add vendor prefixes for bm, gpio-key, mentor, FII, and Ampere
- Add ADP5585/ADP5589 and delta,q54sj108a2 to trivial-devices.yaml
- Convert fixed-partitions, i2c-gate and fsl,dpaa2-console bindings to
schemas
- Drop PicoXcell bindings
- Drop unused and undocumented 'pnx,timeout' property from LPC32xx
- Add 'dynamic-power-coefficient' to Mali GPU bindings
- Make 'make dt_binding_check' not error out on warnings
- Various minor binding fixes
* tag 'devicetree-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (22 commits)
dt-bindings: mali-bifrost: Add dynamic-power-coefficient
dt-bindings: mali-midgard: Add dynamic-power-coefficient
dt-bindings: i2c: dw: cancel mandatory requirements for "#address-cells" and "#size-cells"
dt-bindings: Remove PicoXcell bindings
ARM: dts: lpc32xx: Remove unused and undocumented 'pnx,timeout'
dt-bindings: mtd: convert "fixed-partitions" to the json-schema
dt-bindings: vendor-prefixes: Add undocumented bm, gpio-key, and mentor prefixes
dt-bindings: pci: rcar-pci-ep: Document missing interrupts property
dt-bindings: vendor-prefixes: Add an entry for AmpereComputing.com
dt-bindings: vendor-prefixes: correct the spelling of TQ-Systems GmbH
dt-bindings: mfd: fix stm32 timers example
dt-bindings: trivial-devices: Add delta,q54sj108a2
dt-bindings:i2c:i2c-gate: txt to yaml conversion
dt-bindings: add ADP5585/ADP5589 entries to trivial-devices
dt-bindings: Correct GV11B GPU register sizes
dt-bindings: vendor-prefixes: Add FII
dt-bindings: Fix typo on the DesignWare IP reset bindings documentation
dt-bindings: Fix error in 'make dtbs_check' when using DT_SCHEMA_FILES
dt-bindings: arm: vt8500: remove redundant white-spaces
dt-bindings: fsl-imx-drm: fix example compatible string
...
Pull MTD updates from Miquel Raynal:
"MTD core:
- Fix refcounting for unpartitioned MTDs
- Fix misspelled function parameter 'section'
- Remove unneeded break
- cmdline parser: Fix parsing of part-names with colons
- mtdpart: Fix misdocumented function parameter 'mtd'
MTD devices:
- phram:
- Allow the user to set the erase page size
- File headers are not good candidates for kernel-doc
- physmap-bt1-rom: Fix __iomem addrspace removal warning
- plat-ram: correctly free memory on error path in platram_probe()
- powernv_flash: Add function names to headers and fix 'dev'
- docg3: Fix kernel-doc 'bad line' and 'excessive doc' issues
UBI cleanup fixes:
- gluebi: Fix misnamed function parameter documentation
- wl: Fix a couple of kernel-doc issues
- eba: Fix a couple of misdocumentation issues
- kapi: Correct documentation for 'ubi_leb_read_sg's 'sgl' parameter
- Document 'ubi_num' in struct mtd_dev_param
Generic NAND core ECC management:
- Add an I/O request tweaking mechanism
- Entire rework of the software BCH ECC driver, creation of a real
ECC engine, getting rid of raw NAND structures, migration to more
generic prototypes, misc fixes and style cleanup. Moved now to the
Generic NAND layer.
- Entire rework of the software Hamming ECC driver, creation of a
real ECC engine, getting rid of raw NAND structures, misc renames,
comment updates, cleanup, and style fixes. Moved now to the generic
NAND layer.
- Necessary plumbing at the NAND level to retrieve generic NAND ECC
engines (softwares and on-die).
- Update of the bindings.
Raw NAND core:
- Geting rid of the chip->ecc.priv entry.
- Fix miscellaneous typos in kernel-doc
Raw NAND controller drivers:
- Arasan: Document 'anfc_op's 'buf' member
- AU1550: Ensure the presence of the right includes
- Brcmnand: Demote non-conformant kernel-doc headers
- Cafe: Remove superfluous param doc and add another
- Davinci: Do not use extra dereferencing
- Diskonchip: Marking unused variables as __always_unused
- GPMI:
- Fix the driver only sense CS0 R/B issue
- Fix the random DMA timeout issue
- Use a single line for of_device_id
- Use of_device_get_match_data()
- Fix reference count leak in gpmi ops
- Cleanup makefile
- Fix binding matching of clocks on different SoCs
- Ingenic: remove redundant get_device() in ingenic_ecc_get()
- Intel LGM: New NAND controller driver
- Marvell: Drop useless line
- Meson:
- Fix a resource leak in init
- Fix meson_nfc_dma_buffer_release() arguments
- mxc:
- Use device_get_match_data()
- Use a single line for of_device_id
- Remove platform data support
- Omap:
- Fix a bunch of kernel-doc misdemeanours
- Finish ELM half populated function header, demote empty ones
- s3c2410: Add documentation for 2 missing struct members
- Sunxi: Document 'sunxi_nfc's 'caps' member
- Qcom:
- Add support for SDX55
- Support for IPQ6018 QPIC NAND controller
- Fix DMA sync on FLASH_STATUS register read
- Rockchip: New NAND controller driver for RK3308, RK2928 and others
- Sunxi: Add MDMA support
ONENAND:
- bbt: Fix expected kernel-doc formatting
- Fix some kernel-doc misdemeanours
- Fix expected kernel-doc formatting
- Use mtd->oops_panic_write as condition
SPI-NAND core:
- Creation of a SPI-NAND on-die ECC engine
- Move ECC related definitions earlier in the driver
- Fix typo in comment
- Fill a default ECC provider/algorithm
- Remove outdated comment
- Fix OOB read
- Allow the case where there is no ECC engine
- Use the external ECC engine logic
SPI-NAND chip drivers:
- Micron:
- Add support for MT29F2G01AAAED
- Use more specific names
- Macronix:
- Add support for MX35LFxG24AD
- Add support for MX35LFxGE4AD
- Toshiba: Demote non-conformant kernel-doc header
SPI-NOR core:
- Initial support for stateful Octal DTR mode using volatile settings
- Preliminary support for JEDEC 251 (xSPI) and JEDEC 216D standards
- Support for Cypress Semper flash
- Support to specify ECC block size of SPI NOR flashes
- Fixes to avoid clearing of non-volatile Block Protection bits at
probe
- hisi-sfc: Demote non-conformant kernel-doc"
* tag 'mtd/for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (120 commits)
mtd: spinand: macronix: Add support for MX35LFxG24AD
mtd: rawnand: rockchip: NFC driver for RK3308, RK2928 and others
dt-bindings: mtd: Describe Rockchip RK3xxx NAND flash controller
mtd: rawnand: gpmi: Use a single line for of_device_id
mtd: rawnand: gpmi: Fix the random DMA timeout issue
mtd: rawnand: gpmi: Fix the driver only sense CS0 R/B issue
mtd: rawnand: qcom: Add NAND controller support for SDX55
dt-bindings: qcom_nandc: Add SDX55 QPIC NAND documentation
mtd: rawnand: mxc: Use a single line for of_device_id
mtd: rawnand: mxc: Use device_get_match_data()
mtd: rawnand: meson: Fix a resource leak in init
mtd: rawnand: gpmi: Use of_device_get_match_data()
mtd: rawnand: Add NAND controller support on Intel LGM SoC
dt-bindings: mtd: Add Nand Flash Controller support for Intel LGM SoC
mtd: spinand: micron: Add support for MT29F2G01AAAED
mtd: spinand: micron: Use more specific names
mtd: rawnand: gpmi: fix reference count leak in gpmi ops
dt-bindings: mtd: gpmi-nand: Fix matching of clocks on different SoCs
mtd: spinand: macronix: Add support for MX35LFxGE4AD
mtd: plat-ram: correctly free memory on error path in platram_probe()
...
Pull TIF_NOTIFY_SIGNAL updates from Jens Axboe:
"This sits on top of of the core entry/exit and x86 entry branch from
the tip tree, which contains the generic and x86 parts of this work.
Here we convert the rest of the archs to support TIF_NOTIFY_SIGNAL.
With that done, we can get rid of JOBCTL_TASK_WORK from task_work and
signal.c, and also remove a deadlock work-around in io_uring around
knowing that signal based task_work waking is invoked with the sighand
wait queue head lock.
The motivation for this work is to decouple signal notify based
task_work, of which io_uring is a heavy user of, from sighand. The
sighand lock becomes a huge contention point, particularly for
threaded workloads where it's shared between threads. Even outside of
threaded applications it's slower than it needs to be.
Roman Gershman <romger@amazon.com> reported that his networked
workload dropped from 1.6M QPS at 80% CPU to 1.0M QPS at 100% CPU
after io_uring was changed to use TIF_NOTIFY_SIGNAL. The time was all
spent hammering on the sighand lock, showing 57% of the CPU time there
[1].
There are further cleanups possible on top of this. One example is
TIF_PATCH_PENDING, where a patch already exists to use
TIF_NOTIFY_SIGNAL instead. Hopefully this will also lead to more
consolidation, but the work stands on its own as well"
[1] https://github.com/axboe/liburing/issues/215
* tag 'tif-task_work.arch-2020-12-14' of git://git.kernel.dk/linux-block: (28 commits)
io_uring: remove 'twa_signal_ok' deadlock work-around
kernel: remove checking for TIF_NOTIFY_SIGNAL
signal: kill JOBCTL_TASK_WORK
io_uring: JOBCTL_TASK_WORK is no longer used by task_work
task_work: remove legacy TWA_SIGNAL path
sparc: add support for TIF_NOTIFY_SIGNAL
riscv: add support for TIF_NOTIFY_SIGNAL
nds32: add support for TIF_NOTIFY_SIGNAL
ia64: add support for TIF_NOTIFY_SIGNAL
h8300: add support for TIF_NOTIFY_SIGNAL
c6x: add support for TIF_NOTIFY_SIGNAL
alpha: add support for TIF_NOTIFY_SIGNAL
xtensa: add support for TIF_NOTIFY_SIGNAL
arm: add support for TIF_NOTIFY_SIGNAL
microblaze: add support for TIF_NOTIFY_SIGNAL
hexagon: add support for TIF_NOTIFY_SIGNAL
csky: add support for TIF_NOTIFY_SIGNAL
openrisc: add support for TIF_NOTIFY_SIGNAL
sh: add support for TIF_NOTIFY_SIGNAL
um: add support for TIF_NOTIFY_SIGNAL
...
Pull asm-generic cross-architecture timer cleanup from Arnd Bergmann:
"This cleans up two ancient timer features that were never completed in
the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET.
There was only one user left for the ARCH_USES_GETTIMEOFFSET variant
of clocksource implementations, the ARM EBSA110 platform. Rather than
changing to use modern timekeeping, we remove the platform entirely as
Russell no longer uses his machine and nobody else seems to have one
any more.
The conditional code for using arch_gettimeoffset() is removed as a
result.
For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms
not using clockevent drivers: parisc, ia64, most of m68k, and one Arm
platform. These all do timer ticks slighly differently, and this gets
cleaned up to the point they at least all call the same helper
function.
Instead of most platforms using 'select GENERIC_CLOCKEVENTS' in
Kconfig, the polarity is now reversed, with the few remaining ones
selecting LEGACY_TIMER_TICK instead"
* tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
timekeeping: default GENERIC_CLOCKEVENTS to enabled
timekeeping: remove xtime_update
m68k: remove timer_interrupt() function
m68k: change remaining timers to legacy_timer_tick
m68k: m68328: use legacy_timer_tick()
m68k: sun3/sun3c: use legacy_timer_tick
m68k: split heartbeat out of timer function
m68k: coldfire: use legacy_timer_tick()
parisc: use legacy_timer_tick
ARM: rpc: use legacy_timer_tick
ia64: convert to legacy_timer_tick
timekeeping: add CONFIG_LEGACY_TIMER_TICK
timekeeping: remove arch_gettimeoffset
net: remove am79c961a driver
ARM: remove ebsa110 platform
Pull asm-generic mmu-context cleanup from Arnd Bergmann:
"This is a cleanup series from Nicholas Piggin, preparing for later
changes. The asm/mmu_context.h header are generalized and common code
moved to asm-gneneric/mmu_context.h.
This saves a bit of code and makes it easier to change in the future"
* tag 'asm-generic-mmu-context-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (25 commits)
h8300: Fix generic mmu_context build
m68k: mmu_context: Fix Sun-3 build
xtensa: use asm-generic/mmu_context.h for no-op implementations
x86: use asm-generic/mmu_context.h for no-op implementations
um: use asm-generic/mmu_context.h for no-op implementations
sparc: use asm-generic/mmu_context.h for no-op implementations
sh: use asm-generic/mmu_context.h for no-op implementations
s390: use asm-generic/mmu_context.h for no-op implementations
riscv: use asm-generic/mmu_context.h for no-op implementations
powerpc: use asm-generic/mmu_context.h for no-op implementations
parisc: use asm-generic/mmu_context.h for no-op implementations
openrisc: use asm-generic/mmu_context.h for no-op implementations
nios2: use asm-generic/mmu_context.h for no-op implementations
nds32: use asm-generic/mmu_context.h for no-op implementations
mips: use asm-generic/mmu_context.h for no-op implementations
microblaze: use asm-generic/mmu_context.h for no-op implementations
m68k: use asm-generic/mmu_context.h for no-op implementations
ia64: use asm-generic/mmu_context.h for no-op implementations
hexagon: use asm-generic/mmu_context.h for no-op implementations
csky: use asm-generic/mmu_context.h for no-op implementations
...
Pull regset updates from Al Viro:
"Dead code removal, mostly.
The only exception is a bit of cleanups on itanic (getting rid of
redundant stack unwinds - each access_uarea() call does it and we call
that 7 times in a row in ptrace_[sg]etregs(), *after* having done it
ourselves in the caller; location where the user registers have been
spilled won't change under us, and we can bloody well just call
access_elf_reg() directly, giving it the unw_frame_info we'd
calculated for our own purposes)"
* 'regset.followup' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
c6x: kill ELF_CORE_COPY_FPREGS
whack-a-mole: USE_ELF_CORE_DUMP
[ia64] ptrace_[sg]etregs(): use access_elf_reg() instead of access_uarea()
[ia64] missed cleanups from switch to regset coredumps
arm: kill dump_task_regs()
Pull input updates from Dmitry Torokhov:
- support for inhibiting input devices at request from userspace. If a
device implements open/close methods, it can also put device into low
power state. This is needed, for example, to disable keyboard and
touchpad on convertibles when they are transitioned into tablet mode
- now that ordinary input devices can be configured for polling mode,
dedicated input polling device implementation has been removed
- GTCO tablet driver has been removed, as it used problematic custom
HID parser, devices are EOL, and there is no interest from the
manufacturer
- a new driver for Dialog DA7280 haptic chips has been introduced
- a new driver for power button on Dell Wyse 3020
- support for eKTF2132 in ektf2127 driver
- support for SC2721 and SC2730 in sc27xx-vibra driver
- enhancements for Atmel touchscreens, AD7846 touchscreens, Elan
touchpads, ADP5589, ST1232 touchscreen, TM2 touchkey drivers
- fixes and cleanups to allow clean builds with W=1
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (86 commits)
Input: da7280 - fix spelling mistake "sequemce" -> "sequence"
Input: cyapa_gen6 - fix out-of-bounds stack access
Input: sc27xx - add support for sc2730 and sc2721
dt-bindings: input: Add compatible string for SC2721 and SC2730
dt-bindings: input: Convert sc27xx-vibra.txt to json-schema
Input: stmpe - add axis inversion and swapping capability
Input: adp5589-keys - do not explicitly control IRQ for wakeup
Input: adp5589-keys - do not unconditionally configure as wakeup source
Input: ipx4xx-beeper - convert comma to semicolon
Input: parkbd - convert comma to semicolon
Input: new da7280 haptic driver
dt-bindings: input: Add document bindings for DA7280
MAINTAINERS: da7280 updates to the Dialog Semiconductor search terms
Input: elantech - fix protocol errors for some trackpoints in SMBus mode
Input: elan_i2c - add new trackpoint report type 0x5F
Input: elants - document some registers and values
Input: atmel_mxt_ts - simplify the return expression of mxt_send_bootloader_cmd()
Input: imx_keypad - add COMPILE_TEST support
Input: applespi - use new structure for SPI transfer delays
Input: synaptics-rmi4 - use new structure for SPI transfer delays
...
Pull irq updates from Thomas Gleixner:
"Generic interrupt and irqchips subsystem updates. Unusually, there is
not a single completely new irq chip driver, just new DT bindings and
extensions of existing drivers to accomodate new variants!
Core:
- Consolidation and robustness changes for irq time accounting
- Cleanup and consolidation of irq stats
- Remove the fasteoi IPI flow which has been proved useless
- Provide an interface for converting legacy interrupt mechanism into
irqdomains
Drivers:
- Preliminary support for managed interrupts on platform devices
- Correctly identify allocation of MSIs proxyied by another device
- Generalise the Ocelot support to new SoCs
- Improve GICv4.1 vcpu entry, matching the corresponding KVM
optimisation
- Work around spurious interrupts on Qualcomm PDC
- Random fixes and cleanups"
* tag 'irq-core-2020-12-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
irqchip/qcom-pdc: Fix phantom irq when changing between rising/falling
driver core: platform: Add devm_platform_get_irqs_affinity()
ACPI: Drop acpi_dev_irqresource_disabled()
resource: Add irqresource_disabled()
genirq/affinity: Add irq_update_affinity_desc()
irqchip/gic-v3-its: Flag device allocation as proxied if behind a PCI bridge
irqchip/gic-v3-its: Tag ITS device as shared if allocating for a proxy device
platform-msi: Track shared domain allocation
irqchip/ti-sci-intr: Fix freeing of irqs
irqchip/ti-sci-inta: Fix printing of inta id on probe success
drivers/irqchip: Remove EZChip NPS interrupt controller
Revert "genirq: Add fasteoi IPI flow"
irqchip/hip04: Make IPIs use handle_percpu_devid_irq()
irqchip/bcm2836: Make IPIs use handle_percpu_devid_irq()
irqchip/armada-370-xp: Make IPIs use handle_percpu_devid_irq()
irqchip/gic, gic-v3: Make SGIs use handle_percpu_devid_irq()
irqchip/ocelot: Add support for Jaguar2 platforms
irqchip/ocelot: Add support for Serval platforms
irqchip/ocelot: Add support for Luton platforms
irqchip/ocelot: prepare to support more SoC
...
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big USB and thunderbolt pull request for 5.11-rc1.
Nothing major in here, just the grind of constant development to
support new hardware and fix old issues:
- thunderbolt updates for new USB4 hardware
- cdns3 major driver updates
- lots of typec updates and additions as more hardware is available
- usb serial driver updates and fixes
- other tiny USB driver updates
All have been in linux-next with no reported issues"
* tag 'usb-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits)
usb: phy: convert comma to semicolon
usb: ucsi: convert comma to semicolon
usb: typec: tcpm: convert comma to semicolon
usb: typec: tcpm: Update vbus_vsafe0v on init
usb: typec: tcpci: Enable bleed discharge when auto discharge is enabled
usb: typec: Add class for plug alt mode device
USB: typec: tcpci: Add Bleed discharge to POWER_CONTROL definition
USB: typec: tcpm: Add a 30ms room for tPSSourceOn in PR_SWAP
USB: typec: tcpm: Fix PR_SWAP error handling
USB: typec: tcpm: Hard Reset after not receiving a Request
USB: gadget: f_fs: remove likely/unlikely
usb: gadget: f_fs: Re-use SS descriptors for SuperSpeedPlus
USB: gadget: f_midi: setup SuperSpeed Plus descriptors
USB: gadget: f_acm: add support for SuperSpeed Plus
USB: gadget: f_rndis: fix bitrate for SuperSpeed and above
usb: typec: intel_pmc_mux: Configure cable generation value for USB4
MAINTAINERS: Add myself as a reviewer for CADENCE USB3 DRD IP DRIVER
usb: chipidea: ci_hdrc_imx: Use of_device_get_match_data()
usb: chipidea: usbmisc_imx: Use of_device_get_match_data()
usb: cdns3: fix NULL pointer dereference on no platform data
...
Pull networking updates from Jakub Kicinski:
"Core:
- support "prefer busy polling" NAPI operation mode, where we defer
softirq for some time expecting applications to periodically busy
poll
- AF_XDP: improve efficiency by more batching and hindering the
adjacency cache prefetcher
- af_packet: make packet_fanout.arr size configurable up to 64K
- tcp: optimize TCP zero copy receive in presence of partial or
unaligned reads making zero copy a performance win for much smaller
messages
- XDP: add bulk APIs for returning / freeing frames
- sched: support fragmenting IP packets as they come out of conntrack
- net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs
BPF:
- BPF switch from crude rlimit-based to memcg-based memory accounting
- BPF type format information for kernel modules and related tracing
enhancements
- BPF implement task local storage for BPF LSM
- allow the FENTRY/FEXIT/RAW_TP tracing programs to use
bpf_sk_storage
Protocols:
- mptcp: improve multiple xmit streams support, memory accounting and
many smaller improvements
- TLS: support CHACHA20-POLY1305 cipher
- seg6: add support for SRv6 End.DT4/DT6 behavior
- sctp: Implement RFC 6951: UDP Encapsulation of SCTP
- ppp_generic: add ability to bridge channels directly
- bridge: Connectivity Fault Management (CFM) support as is defined
in IEEE 802.1Q section 12.14.
Drivers:
- mlx5: make use of the new auxiliary bus to organize the driver
internals
- mlx5: more accurate port TX timestamping support
- mlxsw:
- improve the efficiency of offloaded next hop updates by using
the new nexthop object API
- support blackhole nexthops
- support IEEE 802.1ad (Q-in-Q) bridging
- rtw88: major bluetooth co-existance improvements
- iwlwifi: support new 6 GHz frequency band
- ath11k: Fast Initial Link Setup (FILS)
- mt7915: dual band concurrent (DBDC) support
- net: ipa: add basic support for IPA v4.5
Refactor:
- a few pieces of in_interrupt() cleanup work from Sebastian Andrzej
Siewior
- phy: add support for shared interrupts; get rid of multiple driver
APIs and have the drivers write a full IRQ handler, slight growth
of driver code should be compensated by the simpler API which also
allows shared IRQs
- add common code for handling netdev per-cpu counters
- move TX packet re-allocation from Ethernet switch tag drivers to a
central place
- improve efficiency and rename nla_strlcpy
- number of W=1 warning cleanups as we now catch those in a patchwork
build bot
Old code removal:
- wan: delete the DLCI / SDLA drivers
- wimax: move to staging
- wifi: remove old WDS wifi bridging support"
* tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits)
net: hns3: fix expression that is currently always true
net: fix proc_fs init handling in af_packet and tls
nfc: pn533: convert comma to semicolon
af_vsock: Assign the vsock transport considering the vsock address flags
af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path
vsock_addr: Check for supported flag values
vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag
vm_sockets: Add flags field in the vsock address data structure
net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled
tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit
net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context
nfc: s3fwrn5: Release the nfc firmware
net: vxget: clean up sparse warnings
mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router
mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3
mlxsw: spectrum_router_xm: Introduce basic XM cache flushing
mlxsw: reg: Add Router LPM Cache Enable Register
mlxsw: reg: Add Router LPM Cache ML Delete Register
mlxsw: spectrum_router_xm: Implement L-value tracking for M-index
mlxsw: reg: Add XM Router M Table Register
...
Merge misc updates from Andrew Morton:
- a few random little subsystems
- almost all of the MM patches which are staged ahead of linux-next
material. I'll trickle to post-linux-next work in as the dependents
get merged up.
Subsystems affected by this patch series: kthread, kbuild, ide, ntfs,
ocfs2, arch, and mm (slab-generic, slab, slub, dax, debug, pagecache,
gup, swap, shmem, memcg, pagemap, mremap, hmm, vmalloc, documentation,
kasan, pagealloc, memory-failure, hugetlb, vmscan, z3fold, compaction,
oom-kill, migration, cma, page-poison, userfaultfd, zswap, zsmalloc,
uaccess, zram, and cleanups).
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (200 commits)
mm: cleanup kstrto*() usage
mm: fix fall-through warnings for Clang
mm: slub: convert sysfs sprintf family to sysfs_emit/sysfs_emit_at
mm: shmem: convert shmem_enabled_show to use sysfs_emit_at
mm:backing-dev: use sysfs_emit in macro defining functions
mm: huge_memory: convert remaining use of sprintf to sysfs_emit and neatening
mm: use sysfs_emit for struct kobject * uses
mm: fix kernel-doc markups
zram: break the strict dependency from lzo
zram: add stat to gather incompressible pages since zram set up
zram: support page writeback
mm/process_vm_access: remove redundant initialization of iov_r
mm/zsmalloc.c: rework the list_add code in insert_zspage()
mm/zswap: move to use crypto_acomp API for hardware acceleration
mm/zswap: fix passing zero to 'PTR_ERR' warning
mm/zswap: make struct kernel_param_ops definitions const
userfaultfd/selftests: hint the test runner on required privilege
userfaultfd/selftests: fix retval check for userfaultfd_open()
userfaultfd/selftests: always dump something in modes
userfaultfd: selftests: make __{s,u}64 format specifiers portable
...
Pull irqchip updates for 5.11 from Marc Zyngier:
- Preliminary support for managed interrupts on platform devices
- Correctly identify allocation of MSIs proxyied by another device
- Remove the fasteoi IPI flow which has been proved useless
- Generalise the Ocelot support to new SoCs
- Improve GICv4.1 vcpu entry, matching the corresponding KVM optimisation
- Work around spurious interrupts on Qualcomm PDC
- Random fixes and cleanups
Link: https://lore.kernel.org/r/20201212135626.1479884-1-maz@kernel.org
Pull kmap updates from Thomas Gleixner:
"The new preemtible kmap_local() implementation:
- Consolidate all kmap_atomic() internals into a generic
implementation which builds the base for the kmap_local() API and
make the kmap_atomic() interface wrappers which handle the
disabling/enabling of preemption and pagefaults.
- Switch the storage from per-CPU to per task and provide scheduler
support for clearing mapping when scheduling out and restoring them
when scheduling back in.
- Merge the migrate_disable/enable() code, which is also part of the
scheduler pull request. This was required to make the kmap_local()
interface available which does not disable preemption when a
mapping is established. It has to disable migration instead to
guarantee that the virtual address of the mapped slot is the same
across preemption.
- Provide better debug facilities: guard pages and enforced
utilization of the mapping mechanics on 64bit systems when the
architecture allows it.
- Provide the new kmap_local() API which can now be used to cleanup
the kmap_atomic() usage sites all over the place. Most of the usage
sites do not require the implicit disabling of preemption and
pagefaults so the penalty on 64bit and 32bit non-highmem systems is
removed and quite some of the code can be simplified. A wholesale
conversion is not possible because some usage depends on the
implicit side effects and some need to be cleaned up because they
work around these side effects.
The migrate disable side effect is only effective on highmem
systems and when enforced debugging is enabled. On 64bit and 32bit
non-highmem systems the overhead is completely avoided"
* tag 'core-mm-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
ARM: highmem: Fix cache_is_vivt() reference
x86/crashdump/32: Simplify copy_oldmem_page()
io-mapping: Provide iomap_local variant
mm/highmem: Provide kmap_local*
sched: highmem: Store local kmaps in task struct
x86: Support kmap_local() forced debugging
mm/highmem: Provide CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP
mm/highmem: Provide and use CONFIG_DEBUG_KMAP_LOCAL
microblaze/mm/highmem: Add dropped #ifdef back
xtensa/mm/highmem: Make generic kmap_atomic() work correctly
mm/highmem: Take kmap_high_get() properly into account
highmem: High implementation details and document API
Documentation/io-mapping: Remove outdated blurb
io-mapping: Cleanup atomic iomap
mm/highmem: Remove the old kmap_atomic cruft
highmem: Get rid of kmap_types.h
xtensa/mm/highmem: Switch to generic kmap atomic
sparc/mm/highmem: Switch to generic kmap atomic
powerpc/mm/highmem: Switch to generic kmap atomic
nds32/mm/highmem: Switch to generic kmap atomic
...
Pull arm64 updates from Catalin Marinas:
- Expose tag address bits in siginfo. The original arm64 ABI did not
expose any of the bits 63:56 of a tagged address in siginfo. In the
presence of user ASAN or MTE, this information may be useful. The
implementation is generic to other architectures supporting tags
(like SPARC ADI, subject to wiring up the arch code). The user will
have to opt in via sigaction(SA_EXPOSE_TAGBITS) so that the extra
bits, if available, become visible in si_addr.
- Default to 32-bit wide ZONE_DMA. Previously, ZONE_DMA was set to the
lowest 1GB to cope with the Raspberry Pi 4 limitations, to the
detriment of other platforms. With these changes, the kernel scans
the Device Tree dma-ranges and the ACPI IORT information before
deciding on a smaller ZONE_DMA.
- Strengthen READ_ONCE() to acquire when CONFIG_LTO=y. When building
with LTO, there is an increased risk of the compiler converting an
address dependency headed by a READ_ONCE() invocation into a control
dependency and consequently allowing for harmful reordering by the
CPU.
- Add CPPC FFH support using arm64 AMU counters.
- set_fs() removal on arm64. This renders the User Access Override
(UAO) ARMv8 feature unnecessary.
- Perf updates: PMU driver for the ARM DMC-620 memory controller, sysfs
identifier file for SMMUv3, stop event counters support for i.MX8MP,
enable the perf events-based hard lockup detector.
- Reorganise the kernel VA space slightly so that 52-bit VA
configurations can use more virtual address space.
- Improve the robustness of the arm64 memory offline event notifier.
- Pad the Image header to 64K following the EFI header definition
updated recently to increase the section alignment to 64K.
- Support CONFIG_CMDLINE_EXTEND on arm64.
- Do not use tagged PC in the kernel (TCR_EL1.TBID1==1), freeing up 8
bits for PtrAuth.
- Switch to vmapped shadow call stacks.
- Miscellaneous clean-ups.
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (78 commits)
perf/imx_ddr: Add system PMU identifier for userspace
bindings: perf: imx-ddr: add compatible string
arm64: Fix build failure when HARDLOCKUP_DETECTOR_PERF is enabled
arm64: mte: fix prctl(PR_GET_TAGGED_ADDR_CTRL) if TCF0=NONE
arm64: mark __system_matches_cap as __maybe_unused
arm64: uaccess: remove vestigal UAO support
arm64: uaccess: remove redundant PAN toggling
arm64: uaccess: remove addr_limit_user_check()
arm64: uaccess: remove set_fs()
arm64: uaccess cleanup macro naming
arm64: uaccess: split user/kernel routines
arm64: uaccess: refactor __{get,put}_user
arm64: uaccess: simplify __copy_user_flushcache()
arm64: uaccess: rename privileged uaccess routines
arm64: sdei: explicitly simulate PAN/UAO entry
arm64: sdei: move uaccess logic to arch/arm64/
arm64: head.S: always initialize PSTATE
arm64: head.S: cleanup SCTLR_ELx initialization
arm64: head.S: rename el2_setup -> init_kernel_el
arm64: add C wrappers for SET_PSTATE_*()
...
Pull EDAC updates from Borislav Petkov:
"Somewhat busier than usual this cycle:
- Add support for AST2400 and AST2600 hw to aspeed_edac (Troy Lee)
- Remove an orphaned mv64x60_edac driver. Good riddance (Michael
Ellerman)
- Add a new igen6 driver for Intel client SoCs with an integrated
memory controller and using in-band ECC (Qiuxu Zhuo and Tony Luck)
- The usual smattering of fixes and cleanups all over"
* tag 'edac_updates_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/mv64x60: Remove orphan mv64x60 driver
EDAC/aspeed: Add support for AST2400 and AST2600
ARM: dts: aspeed: Add AST2600 EDAC into common devicetree
dt-bindings: edac: aspeed-sdram-edac: Add ast2400/ast2600 support
EDAC/amd64: Fix PCI component registration
EDAC/igen6: ecclog_llist can be static
EDAC/i10nm: Add Intel Sapphire Rapids server support
EDAC: Add DDR5 new memory type
EDAC/i10nm: Use readl() to access MMIO registers
MAINTAINERS: Add entry for Intel IGEN6 EDAC driver
EDAC/igen6: Add debugfs interface for Intel client SoC EDAC driver
EDAC/igen6: Add EDAC driver for Intel client SoCs using IBECC
EDAC/synopsys: Return the correct value in mc_probe()
MAINTAINERS: Clean up the F: entries for some EDAC drivers
EDAC: Add three new memory types
EDAC: Fix some kernel-doc markups
EDAC: Do not issue useless debug statements in the polling routine
EDAC/amd64: Remove unneeded breaks
Pull crypto updates from Herbert Xu:
"API:
- Add speed testing on 1420-byte blocks for networking
Algorithms:
- Improve performance of chacha on ARM for network packets
- Improve performance of aegis128 on ARM for network packets
Drivers:
- Add support for Keem Bay OCS AES/SM4
- Add support for QAT 4xxx devices
- Enable crypto-engine retry mechanism in caam
- Enable support for crypto engine on sdm845 in qce
- Add HiSilicon PRNG driver support"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (161 commits)
crypto: qat - add capability detection logic in qat_4xxx
crypto: qat - add AES-XTS support for QAT GEN4 devices
crypto: qat - add AES-CTR support for QAT GEN4 devices
crypto: atmel-i2c - select CONFIG_BITREVERSE
crypto: hisilicon/trng - replace atomic_add_return()
crypto: keembay - Add support for Keem Bay OCS AES/SM4
dt-bindings: Add Keem Bay OCS AES bindings
crypto: aegis128 - avoid spurious references crypto_aegis128_update_simd
crypto: seed - remove trailing semicolon in macro definition
crypto: x86/poly1305 - Use TEST %reg,%reg instead of CMP $0,%reg
crypto: x86/sha512 - Use TEST %reg,%reg instead of CMP $0,%reg
crypto: aesni - Use TEST %reg,%reg instead of CMP $0,%reg
crypto: cpt - Fix sparse warnings in cptpf
hwrng: ks-sa - Add dependency on IOMEM and OF
crypto: lib/blake2s - Move selftest prototype into header file
crypto: arm/aes-ce - work around Cortex-A57/A72 silion errata
crypto: ecdh - avoid unaligned accesses in ecdh_set_secret()
crypto: ccree - rework cache parameters handling
crypto: cavium - Use dma_set_mask_and_coherent to simplify code
crypto: marvell/octeontx - Use dma_set_mask_and_coherent to simplify code
...
xdp_return_frame_bulk() needs to pass a xdp_buff
to __xdp_return().
strlcpy got converted to strscpy but here it makes no
functional difference, so just keep the right code.
Conflicts:
net/netfilter/nf_tables_api.c
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As part of adding STRICT_DEVMEM support to the RISC-V port, Zong provided an
implementation of devmem_is_allowed() that's exactly the same as the version in
a handful of other ports. Rather than duplicate code, I've put a generic
version of this in lib/ and used it for the RISC-V port.
* palmer/generic-devmem:
arm64: Use the generic devmem_is_allowed()
arm: Use the generic devmem_is_allowed()
RISC-V: Use the new generic devmem_is_allowed()
lib: Add a generic version of devmem_is_allowed()
This is exactly the same as the arm64 version, which I recently copied
into lib/ for use by the RISC-V port.
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
