max1363 uses both the iio hardware ring buffer and software
ring buffer interfaces, but its Makefile and Kconfig do not
reflect that usage, so its build breaks. Add a new Kconfig
symbol to reflect that usage and change max1363.h & Makefile
to use the new Kconfig symbol.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
`|' has a higher precedence than `?' so since MSG_WAITALL is
defined 0x100, MSG_MORE was always written to the msg_flag.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The DMA resource allocation function is called "vme_request_dma" while
master and slave window allocation functions are called
"vme_master_request" and "vme_slave_request" respectively. Rename
"vme_request_dma" to "vme_dma_request" to fit the pattern.
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The vme_lm_free() function is not clearing up the resource created in
vme_lm_request(). In addition vme_lm_free() is void function and is used in
exit/error paths, we should wait for mutex to become free rather than
exiting and not freeing the resource.
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The TSI148 driver currently does not allow a size of zero to be passed to a
window. Zero is a valid value if the window is being disabled. Allow
windows to be disabled and their registers cleared.
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It's causing people to ignore problems in the file, so get rid
of them so it's obvious something is wrong in the future.
Cc: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Currently the VME callback infrastructure is replicated in each VME driver.
Move this common code into the VME core. Rename functions to fit in better
with naming of other VME functions.
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Eric Sesterhenn noticed that vme_user is overflowing an array used by
sprintf. Use a bigger array.
CC: Eric Sesterhenn <eric.sesterhenn@lsexperts.de>
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The vt6656 driver is integrated in the kernel so it no longer needs the
compatibility header.
Signed-off-by: Shawn Bohrer <shawn.bohrer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The vt6655 driver is integrated in the kernel so it no longer needs the
compatibility header.
Signed-off-by: Shawn Bohrer <shawn.bohrer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
uNodeIndex is unsigned, check whether it is within bounds instead.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch is based on next-20091106.
This tiny patch removes a few quite unnecessary extra newlines from
DBGPRINT() and printk() strings.
Signed-off-by: Sebastian Dalfuß <sd@sedf.de>
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The stuff that tries to read a file from /etc is already removed, so
this patch just removes the last remainders.
Signed-off-by: Sebastian Dalfuß <sd@sedf.de>
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
After the incorporation of the patch entitled "wext: refactor", some
of the wireless drivers in drivers/staging fail to build because they
need to have CONFIG_WIRELESS_EXT and CONFIG_WEXT_PRIV defined.
[ patch description borrowed from the previous fix for wireless staging
drivers ("staging: Add proper selection of WIRELESS_EXT and WEXT_PRIV")
authored by Larry Finger ]
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Second lot of checkpatch.pl error and warning fixes for .c files of
otus driver in staging tree.
(Externs would be removed in a seperate patch)
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
First patch for checkpatch.pl error and warning fixes for .c files of otus
driver in staging tree.
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix for checkpatch.pl errors and warnings in header files of otus driver.
(There is a typedef which still remains. Plan to clean it up in next set
of patches)
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
wakelocks are power optimalization, not supported in mainline. Remove
them so that code compiles on mainline.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Includes changed so that <linux/sched.h> is now needed for
TASK_INTERRUPTIBLE and friends, so include it.
Remove hooks for features not in mainline, such as earlysuspend and
wakelocks.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Check that SMBUS APIs are available in touchscreen driver.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Cc: Trilok Soni <soni.trilok@gmail.com>
Cc: <arve@android.com>
Cc: Brian Swetland <swetland@google.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It doesn't build, and hasn't for a long time (if ever). So mark
it BROKEN for now.
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Adds TODO to the wlags_h2 and wlags_h5 staging drivers.
Signed-off-by: Henk de Groot <pe1dnn@amsat.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
WLAN driver for cards using the HERMES II and HERMES II.5 chipset
Based on Agere Systems Linux LKM Wireless Driver Source Code,
Version 7.22; complies with Open Source BSD License.
The software is a modified version of wl_lkm_722_abg.tar.gz from the
Agere Systems website, addapted for Ubuntu 9.04 and modified to
fit in the current Linux kernel (2.6.31).
Modified for kernel 2.6 by Henk de Groot <pe1dnn@amsat.org>
Based on 7.18 version by Andrey Borzenkov <arvidjaar@mail.ru> $Revision: 39 $
Signed-off-by: Henk de Groot <pe1dnn@amsat.org>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Include linux/types.h in poch.h, so that poch.h can be included in
user application header files.
Signed-off-by: Vijay Kumar B. <vijaykumar@bravegnu.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove the circular buffer header. Which has been superseded by the
ioctl consume interface.
Signed-off-by: Vijay Kumar B <vijaykumar@bravegnu.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Increase groups per interrupt to reduce hogging of the CPU.
Signed-off-by: Vijay Kumar B. <vijaykumar@bravegnu.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Change user space interface to an IOCTL based interface instead of a
memory mapped circular buffer. The circular buffer had some serious
cache(?) issues and never worked.
Signed-off-by: Vijay Kumar B. <vijaykumar@bravegnu.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Adds a parameter that causes the hardware to synthesize Rx values
using a counter.
Signed-off-by: Vijay Kumar B. <vijaykumar@bravegnu.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fold in the TPAL stuff and remove the duplication
Clean up other stuff where we do un-needed work or have verbose implementations
Comment some of the functions as we go
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Clean up the phy code a bit so we can see what needs doing. This involves
moving blocks around and making stuff static
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As with tx there was a pending list Linux doesn't use
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Clean up the names to be Linux like
Remove the unused pad buffer
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Clean up the minor uglies left from the previous work
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The Linux driver doesn't keep a pending queue as the old one did. so we can
remove all the code related to it.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We don't use them for anything having stripped out the debug gunge in
the original driver.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Sort out the variable naming and clean up types and obvious trivia
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
A little more complex but again move the structure and typedef into into the
documentation
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is basically not really used so turn it into a u32 and comment the
format for reference
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Turn it into a u32 and document the fields in a comment instead
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove the stuff that falls out from this always being zero.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The NMI code is in the shipped driver for "validation". We won't be doing
chip validation and we have proper core nmi handling so this can go.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Perform some easy tidying so we can see what needs to be done next
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This puts all the eeprom handling in one place and cleans up the interfaces
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Turn this one into something resembling a clean Linux driver
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The definition of slic_netdev_ops has initializations of a local function
and eth_mac_addr for its ndo_set_mac_address field. This change uses only
the local function.
The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@r@
identifier I, s, fld;
position p0,p;
expression E;
@@
struct I s =@p0 { ... .fld@p = E, ...};
@s@
identifier I, s, r.fld;
position r.p0,p;
expression E;
@@
struct I s =@p0 { ... .fld@p = E, ...};
@script:python@
p0 << r.p0;
fld << r.fld;
ps << s.p;
pr << r.p;
@@
if int(ps[0].line)!=int(pr[0].line) or int(ps[0].column)!=int(pr[0].column):
cocci.print_main(fld,p0)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Both the max1363 and lis3l02dq modules rely on IIO trigger support in
their ring buffer implementations, which is presently a separate config
option. In the case of IIO_RING_BUFFER=y and IIO_TRIGGER=n, we end up
with the following:
ERROR: "iio_trigger_attach_poll_func" [drivers/staging/iio/adc/max1363.ko] undefined!
ERROR: "iio_trigger_dettach_poll_func" [drivers/staging/iio/adc/max1363.ko] undefined!
ERROR: "iio_trigger_unregister" [drivers/staging/iio/accel/lis3l02dq.ko] undefined!
ERROR: "iio_trigger_notify_done" [drivers/staging/iio/accel/lis3l02dq.ko] undefined!
ERROR: "iio_trigger_read_name" [drivers/staging/iio/accel/lis3l02dq.ko] undefined!
ERROR: "iio_trigger_poll" [drivers/staging/iio/accel/lis3l02dq.ko] undefined!
ERROR: "iio_trigger_attach_poll_func" [drivers/staging/iio/accel/lis3l02dq.ko] undefined!
ERROR: "iio_trigger_register" [drivers/staging/iio/accel/lis3l02dq.ko] undefined!
ERROR: "iio_free_trigger" [drivers/staging/iio/accel/lis3l02dq.ko] undefined!
ERROR: "iio_trigger_dettach_poll_func" [drivers/staging/iio/accel/lis3l02dq.ko] undefined!
ERROR: "iio_allocate_trigger" [drivers/staging/iio/accel/lis3l02dq.ko] undefined!
make[1]: *** [__modpost] Error 1
make: *** [modules] Error 2
This adds an IIO_TRIGGER select for these two drivers conditional on
IIO ring buffer support. Caught with an SH randconfig in -next.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix iio header files kernel-doc notation errors, spelling, typos,
indentation, grammar, etc.
It would also be good if these function names were spelled
correctly, but I didn't change them:
iio_push_or_escallate_ring_event()
iio_trigger_dettach_poll_func()
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Trivial patch which adds the __init/__exit macros to the module_init/
module_exit functions of drivers/staging/phison/phison.c
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Trivial patch which adds the __init/__exit macros to the module_init/
module_exit functions of drivers/staging/p9auth/p9auth.c
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Trivial patch which adds the __init/__exit macros to the module_init/
module_exit functions of ./staging/cx25821/cx25821-core.c
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Trivial patch which adds the __init/__exit macros to the module_init/
module_exit functions of ./staging/et131x/et131x_initpci.c
Greg, please have a look at the small patch and either pull it through
your staging tree, or please ack' it so Jiri can pull it through the trivial tree.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Creates RAM based block devices (/dev/ramzswapX) which can be
used (only) as swap disks. Pages swapped to these are compressed
and stored in memory itself.
The module is called ramzswap.ko. It depends on:
- xvmalloc memory allocator (compiled with this driver)
- lzo_compress.ko
- lzo_decompress.ko
See ramzswap.txt for usage details.
Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Features:
- Low metadata overhead (just 4 bytes per object)
- O(1) Alloc/Free - except when we have to call system page allocator to
get additional memory.
- Very low fragmentation: In all tests, xvmalloc memory usage is within 12%
of "Ideal".
- Pool based allocator: Each pool can grow and shrink.
- It maps pages only when required. So, it does not hog vmalloc area which
is very small on 32-bit systems.
SLUB allocator could not be used due to fragmentation issues:
http://code.google.com/p/compcache/wiki/AllocatorsComparison
Data here shows kmalloc using ~43% more memory than TLSF and xvMalloc
is showed ~2% more space efficiency than TLSF (due to smaller metadata).
Creating various kmem_caches can reduce space efficiency gap but still
problem of being limited to low memory exists. Also, it depends on
allocating higher order pages to reduce fragmentation - this is not
acceptable for ramzswap as it is used under memory crunch (its a swap
device!).
SLOB allocator could not be used do to reasons mentioned here:
http://lkml.org/lkml/2009/3/18/210
* Implementation:
It uses two-level bitmap search to find free list containing block of
correct size. This idea is taken from TLSF (Two-Level Segregate Fit)
allocator and is well explained in its paper (see [Links] below).
* Limitations:
- Poor scalability: No per-cpu data structures (work in progress).
[Links]
1. Details and Performance data:
http://code.google.com/p/compcache/wiki/xvMallochttp://code.google.com/p/compcache/wiki/xvMallocPerformance
2. TLSF memory allocator:
home: http://rtportal.upv.es/rtmalloc/
paper: http://rtportal.upv.es/rtmalloc/files/MRBC_2008.pdf
Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The COMEDI_CMDTEST ioctl needs to clear unsupported bits in the
struct comedi_cmd's convert_src and other *_src members. This
needs fixing in the pcl816 driver's AI cmdtest.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The i8253_cascade_ns_to_timer_2div() function (and
i8253_cascade_ns_to_timer macro) checks the old values *d1 and *d2
for correctness as a heuristic before calculating new values. Don't
call the function with uninitialized values in *d1 and *d2.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
512 bytes of stack can be saved in serial_2002_open() by modifying
'struct config_t'. A short int suffices for the 'kind' and 'bits'
members. (Actually, a char would suffice, but wouldn't save any more
stack than a short int.)
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
I've fixed a bug in the USBDUX driver which caused timeouts while
sending commands to the boards. This was mainly because of one bulk
transfer which had a timeout of 1ms (!). I've now set all timeouts to
1000ms.
From: Bernd Porr <BerndPorr@f2s.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
add KERN_ facility to printk (mostly KERN_INFO, some KERN_WARNING)
I think I found a bug - commented on it but didn't change as it's just
in a printk (off by 1 error in output)
Signed-off-by: Dirk Hohndel <hohndel@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
No code changes - left some 80 char violations alone as
folding those lines would have made code less readable
Signed-off-by: Dirk Hohndel <hohndel@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
no code changes, just fixing white space, line length, etc
Signed-off-by: Dirk Hohndel <hohndel@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Style cleanup in staging based on Greg's tutorial / checkpatch
Fix 80 char line length (where useful) - includes two changes to code
to make it more logical / readable
Remove {} around single line blocks
Signed-off-by: Dirk Hohndel <hohndel@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes all warnings as issued by checkpatch.pl.
Note that I had to modify some of the logging messages to make that possible.
Signed-off-by: Klaas van Gend <klaas.van.gend@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes all warnings as issued by checkpatch.pl.
Signed-off-by: Klaas van Gend <klaas.van.gend@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The variables are unsigned so the test `>= 0' is always true,
In these cases the other part of the test catch wrapped values.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add KERN_ to printk statements to reduce the number of warnings
shown by checkpatch.pl.
Signed-off-by: Klaas van Gend <klaas.van.gend@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove braces in if statements to make the file exhibit less warnings
when checked using checkpatch.pl.
Signed-off-by: Klaas van Gend <klaas.van.gend@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
All new kernels have support for compat_ioctl so remove the check and support
for older kernels.
Signed-off-by: Shawn Bohrer <shawn.bohrer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
All new kernels have unlocked_ioctl so we don't need to check.
Signed-off-by: Shawn Bohrer <shawn.bohrer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
something-bility is spelled as something-blity so a grep for 'blit'
would find these lines
this is so trivial that I didn't split it by subsystem / copy additional
maintainers - all changes are to comments The only purpose is to get
fewer false positives when grepping around the kernel sources.
Signed-off-by: Dirk Hohndel <hohndel@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Clean up the printk's in this driver.
Signed-off-by: Bruce Jones <brucej@linux.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Clean up formatting of a struct initializer, as per the
standard conventions.
Signed-off-by: Bruce Jones <brucej@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix improper use of printks in this driver. Most are
debug messages under a DEBUG #ifdef, a few are info/warnings
that should get logged for driver error conditions.
Signed-off-by: Bruce Jones <brucej@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Turn spaces into tabs to keep scripts/checkpatch.pl happy. The
actual changes here are in a comment, so the script is just
being silly.
Signed-off-by: Bruce Jones <brucej@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix improper use of braces in drivers/staging/comedi/drivers/ni_atmio16d.c
Signed-off-by: Bruce Jones <brucej@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Correct formatting errors - in this case line length and spaces before
parens.
Signed-off-by: Bruce Jones <brucej@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The line was too long, used braces on single line for loop body.
Signed-off-by: Allison Randal <allison@parrot.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix printk format warnings in line6/pod.c; sizeof() is of type
size_t, so use %zu.
drivers/staging/line6/pod.c:581: warning: format '%d' expects type 'int', but argument 4 has type 'long unsigned int'
drivers/staging/line6/pod.c:693: warning: format '%d' expects type 'int', but argument 4 has type 'long unsigned int'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
- Factorize the code from line6_send_raw_message and line6_send_program into line6_send
- Minor style cleanups
Signed-off-by: Frederik Deweerdt <frederik.deweerdt@xprog.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add support for RT3090 chipset
(based on 2009_0612_RT3090_Linux_STA_V2.1.0.0_DPO).
Tested with RT2860.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Port changes from:
* 2009_0420_RT2860_Linux_STA_V2.1.0.0
* 2009_0302_RT2870_Linux_STA_v2.1.0.0
* 2009_0525_RT3070_Linux_STA_v2.1.1.0
to in-kernel drivers.
From the RT2860 driver release note:
[2.1.0.0]
1. New generation schema for multiple OS porting
2. Fixed Ad-hoc ping failed in noisy environment. (Probe Response has too
many retry packet then cause "not enough space in MgmtRing")
3. Fixed WPA(2)PSK issue when group cipher of AP is WEP40 or WEP104.
4. Modified iwpriv ra0 get_site_survey:
In scan list result: Security shows "NONE" when AP is OPEN/NONE,
shows "WEP" when AP is OPEN/WEP or SHARED/WEP, shows
"WPAPSK(WPA2PSK)/TKIP(AES)" when AP is WPAPSK(WPA2PSK)/TKIP(AES)
shows "WPA(WPA2)/TKIP(AES)" when AP is WPA(WPA2)/TKIP(AES)
5. Support kthread.
6. Add New A band channel list region 15 contains the whole channels in
the A band region 4 and the new CE channel 167,169,171,173
7. Add New IEEE802.11r functionality.
8. Fixed WPA2-Enterprise failed when AP reboot or turn off then turn on.
9. Fixed STA cannot connect to 11B only AP when the setting of is PHY_11GN.
From the RT2870 driver release note:
[V2.1.0.0]
1. New generation schema for multiple OS porting.
2. Fixed Ad-hoc ping failed in noisy environment. (Probe Response has too
many retry packet then cause "not enough space in MgmtRing").
3. Fixed WPS failed with D-Link DIR-628 in 5GHz.
4. Change FastRoaming in DAT file to AutoRoaming.
5. Support kthread.
6. Add New A band channel list region 15 contains the whole channels in
the A band region and the new CE channel 167,169,171,173.
7. New IEEE802.11r functionality.
From the RT3070 driver release note:
Version V2.1.1.0
1. Linux kernel 2.6.29 support.
2. Fix eFuse write from BIN file bug.
Version 2.1.0.0
1. New generation schema for multiple OS porting
2. Fixed Ad-hoc ping failed in noisy environment.
3. Modified iwpriv ra0 get_site_survey:
4. Change FastRoaming in DAT file to AutoRoaming.
5. Support kthread.
6. New IEEE802.11r functionality.
Tested with RT2860 and RT3070 chipsets.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This makes rt3090 match other Ralink drivers.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This makes rt3090 match other Ralink drivers and V2.2.0.0 vendor version.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Disable ATE debugging functionality.
This makes rt3090 match other Ralink drivers and V2.2.0.0 vendor version.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix the following sparse warning:
drivers/usb/musb/musb_host.c:1642:9: warning: symbol 'status' shadows an earlier one
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix the following sparse warnings:
drivers/usb/musb/musb_gadget.c:1161:5: warning: symbol 'musb_gadget_set_halt' was not declared. Should it be static?
drivers/usb/musb/musb_gadget.c:1244:5: warning: symbol 'musb_gadget_set_wedge' was not declared. Should it be static?
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix the following sparse warning:
drivers/usb/musb/omap2430.c:314:16: warning: Using plain integer as NULL pointer
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
