On pseries there is a bug with adding hotplugged devices to an IOMMU
group. For a number of dumb reasons fixing that bug first requires
re-working how VFs are configured on PowerNV. For background, on
PowerNV we use the pcibios_sriov_enable() hook to do two things:
1. Create a pci_dn structure for each of the VFs, and
2. Configure the PHB's internal BARs so the MMIO range for each VF
maps to a unique PE.
Roughly speaking a PE is the hardware counterpart to a Linux IOMMU
group since all the devices in a PE share the same IOMMU table. A PE
also defines the set of devices that should be isolated in response to
a PCI error (i.e. bad DMA, UR/CA, AER events, etc). When isolated all
MMIO and DMA traffic to and from devicein the PE is blocked by the
root complex until the PE is recovered by the OS.
The requirement to block MMIO causes a giant headache because the P8
PHB generally uses a fixed mapping between MMIO addresses and PEs. As
a result we need to delay configuring the IOMMU groups for device
until after MMIO resources are assigned. For physical devices (i.e.
non-VFs) the PE assignment is done in pcibios_setup_bridge() which is
called immediately after the MMIO resources for downstream
devices (and the bridge's windows) are assigned. For VFs the setup is
more complicated because:
a) pcibios_setup_bridge() is not called again when VFs are activated, and
b) The pci_dev for VFs are created by generic code which runs after
pcibios_sriov_enable() is called.
The work around for this is a two step process:
1. A fixup in pcibios_add_device() is used to initialised the cached
pe_number in pci_dn, then
2. A bus notifier then adds the device to the IOMMU group for the PE
specified in pci_dn->pe_number.
A side effect fixing the pseries bug mentioned in the first paragraph
is moving the fixup out of pcibios_add_device() and into
pcibios_bus_add_device(), which is called much later. This results in
step 2. failing because pci_dn->pe_number won't be initialised when
the bus notifier is run.
We can fix this by removing the need for the fixup. The PE for a VF is
known before the VF is even scanned so we can initialise
pci_dn->pe_number pcibios_sriov_enable() instead. Unfortunately,
moving the initialisation causes two problems:
1. We trip the WARN_ON() in the current fixup code, and
2. The EEH core clears pdn->pe_number when recovering a VF and
relies on the fixup to correctly re-set it.
The only justification for either of these is a comment in
eeh_rmv_device() suggesting that pdn->pe_number *must* be set to
IODA_INVALID_PE in order for the VF to be scanned. However, this
comment appears to have no basis in reality. Both bugs can be fixed by
just deleting the code.
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191028085424.12006-1-oohall@gmail.com
When a root user or a user with CAP_SYS_ADMIN privilege uses any
trace_imc performance monitoring unit events, to monitor application
or KVM threads, it may result in a checkstop (System crash).
The cause is frequent switching of the "trace/accumulation" mode of
the In-Memory Collection hardware (LDBAR).
This patch disables the trace_imc PMU unit entirely to avoid
triggering the checkstop. A future patch will reenable it at a later
stage once a workaround has been developed.
Fixes: 012ae24484 ("powerpc/perf: Trace imc PMU functions")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Tested-by: Hariharan T.S. <hari@linux.ibm.com>
[mpe: Add pr_info_once() so dmesg shows the PMU has been disabled]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191118034452.9939-1-maddy@linux.vnet.ibm.com
export_imc_mode_and_cmd() function which creates the debugfs interface
for imc-mode and imc-command, is invoked when each nest pmu units is
registered.
When the first nest pmu unit is registered, export_imc_mode_and_cmd()
creates 'imc' directory under `/debug/powerpc/`. In the subsequent
invocations debugfs_create_dir() function returns, since the directory
already exists.
The recent commit <c33d442328f55> (debugfs: make error message a bit
more verbose), throws a warning if we try to invoke
`debugfs_create_dir()` with an already existing directory name.
Address this warning by making the debugfs directory registration in
the opal_imc_counters_probe() function, i.e invoke
export_imc_mode_and_cmd() function from the probe function.
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Tested-by: Nageswara R Sastry <nasastry@in.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191127072035.4283-1-anju@linux.vnet.ibm.com
On PowerNV the PCIe topology is (currently) managed by the powernv platform
code in Linux in cooperation with the platform firmware. Linux's native
PCIe port service drivers operate independently of both and this can cause
problems.
The main issue is that the portbus driver will conflict with the platform
specific hotplug driver (pnv_php) over ownership of the MSI used to notify
the host when a hotplug event occurs. The portbus driver claims this MSI on
behalf of the individual port services because the same interrupt is used
for hotplug events, PMEs (on root ports), and link bandwidth change
notifications. The portbus driver will always claim the interrupt even if
the individual port service drivers, such as pciehp, are compiled out.
The second, bigger, problem is that the hotplug port service driver
fundamentally does not work on PowerNV. The platform assumes that all
PCI devices have a corresponding arch-specific handle derived from the DT
node for the device (pci_dn) and without one the platform will not allow
a PCI device to be enabled. This problem is largely due to historical
baggage, but it can't be resolved without significant re-factoring of the
platform PCI support.
We can fix these problems in the interim by setting the
"pcie_ports_disabled" flag during platform initialisation. The flag
indicates the platform owns the PCIe ports which stops the portbus driver
from being registered.
This does have the side effect of disabling all port services drivers
that is: AER, PME, BW notifications, hotplug, and DPC. However, this is
not a huge disadvantage on PowerNV since these services are either unused
or handled through other means.
Fixes: 66725152fb ("PCI/hotplug: PowerPC PowerNV PCI hotplug driver")
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191118065553.30362-1-oohall@gmail.com
The callback function of call_rcu() just calls a kfree(), so we
can use kfree_rcu() instead of call_rcu() + callback function.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190711141818.18044-1-yuehaibing@huawei.com
Fix sparse warnings:
arch/powerpc/platforms/powernv/opal-psr.c:20:1:
warning: symbol 'psr_mutex' was not declared. Should it be static?
arch/powerpc/platforms/powernv/opal-psr.c:27:3:
warning: symbol 'psr_attrs' was not declared. Should it be static?
arch/powerpc/platforms/powernv/opal-powercap.c:20:1:
warning: symbol 'powercap_mutex' was not declared. Should it be static?
arch/powerpc/platforms/powernv/opal-sensor-groups.c:20:1:
warning: symbol 'sg_mutex' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190702131733.44100-1-yuehaibing@huawei.com
Use DEFINE_DEBUGFS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTRIBUTE
for debugfs files.
Semantic patch information:
Rationale: DEFINE_SIMPLE_ATTRIBUTE + debugfs_create_file()
imposes some significant overhead as compared to
DEFINE_DEBUGFS_ATTRIBUTE + debugfs_create_file_unsafe().
Generated by: scripts/coccinelle/api/debugfs/debugfs_simple_attr.cocci
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1545705876-63132-1-git-send-email-yuehaibing@huawei.com
Merge the secureboot support, as well as the IMA changes needed to
support it.
From Nayna's cover letter:
In order to verify the OS kernel on PowerNV systems, secure boot
requires X.509 certificates trusted by the platform. These are
stored in secure variables controlled by OPAL, called OPAL secure
variables. In order to enable users to manage the keys, the secure
variables need to be exposed to userspace.
OPAL provides the runtime services for the kernel to be able to
access the secure variables. This patchset defines the kernel
interface for the OPAL APIs. These APIs are used by the hooks, which
load these variables to the keyring and expose them to the userspace
for reading/writing.
Overall, this patchset adds the following support:
* expose secure variables to the kernel via OPAL Runtime API interface
* expose secure variables to the userspace via kernel sysfs interface
* load kernel verification and revocation keys to .platform and
.blacklist keyring respectively.
The secure variables can be read/written using simple linux
utilities cat/hexdump.
For example:
Path to the secure variables is: /sys/firmware/secvar/vars
Each secure variable is listed as directory.
$ ls -l
total 0
drwxr-xr-x. 2 root root 0 Aug 20 21:20 db
drwxr-xr-x. 2 root root 0 Aug 20 21:20 KEK
drwxr-xr-x. 2 root root 0 Aug 20 21:20 PK
The attributes of each of the secure variables are (for example: PK):
$ ls -l
total 0
-r--r--r--. 1 root root 4096 Oct 1 15:10 data
-r--r--r--. 1 root root 65536 Oct 1 15:10 size
--w-------. 1 root root 4096 Oct 1 15:12 update
The "data" is used to read the existing variable value using
hexdump. The data is stored in ESL format. The "update" is used to
write a new value using cat. The update is to be submitted as AUTH
file.
The X.509 certificates trusted by the platform and required to secure
boot the OS kernel are wrapped in secure variables, which are
controlled by OPAL.
This patch adds firmware/kernel interface to read and write OPAL
secure variables based on the unique key.
This support can be enabled using CONFIG_OPAL_SECVAR.
Signed-off-by: Claudio Carvalho <cclaudio@linux.ibm.com>
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Eric Richter <erichte@linux.ibm.com>
[mpe: Make secvar_ops __ro_after_init, only build opal-secvar.c if PPC_SECURE_BOOT=y]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1573441836-3632-2-git-send-email-nayna@linux.ibm.com
Commit e78a7614f3 ("idle: Prevent late-arriving interrupts from
disrupting offline") changes arch_cpu_idle_dead to be called with
interrupts disabled, which triggers the WARN in pnv_smp_cpu_kill_self.
Fix this by fixing up irq_happened after hard disabling, rather than
requiring there are no pending interrupts, similarly to what was done
done until commit 2525db04d1 ("powerpc/powernv: Simplify lazy IRQ
handling in CPU offline").
Fixes: e78a7614f3 ("idle: Prevent late-arriving interrupts from disrupting offline")
Reported-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Add unexpected_mask rather than checking for known bad values,
change the WARN_ON() to a WARN_ON_ONCE()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191022115814.22456-1-npiggin@gmail.com
Recent cleanup in the way EEH support is added to a device causes a
kernel oops when the cxl driver probes a device and creates virtual
devices discovered on the FPGA:
BUG: Kernel NULL pointer dereference at 0x000000a0
Faulting instruction address: 0xc000000000048070
Oops: Kernel access of bad area, sig: 7 [#1]
...
NIP eeh_add_device_late.part.9+0x50/0x1e0
LR eeh_add_device_late.part.9+0x3c/0x1e0
Call Trace:
_dev_info+0x5c/0x6c (unreliable)
pnv_pcibios_bus_add_device+0x60/0xb0
pcibios_bus_add_device+0x40/0x60
pci_bus_add_device+0x30/0x100
pci_bus_add_devices+0x64/0xd0
cxl_pci_vphb_add+0xe0/0x130 [cxl]
cxl_probe+0x504/0x5b0 [cxl]
local_pci_probe+0x6c/0x110
work_for_cpu_fn+0x38/0x60
The root cause is that those cxl virtual devices don't have a
representation in the device tree and therefore no associated pci_dn
structure. In eeh_add_device_late(), pdn is NULL, so edev is NULL and
we oops.
We never had explicit support for EEH for those virtual devices.
Instead, EEH events are reported to the (real) pci device and handled
by the cxl driver. Which can then forward to the virtual devices and
handle dependencies. The fact that we try adding EEH support for the
virtual devices is new and a side-effect of the recent cleanup.
This patch fixes it by skipping adding EEH support on powernv for
devices which don't have a pci_dn structure.
The cxl driver doesn't create virtual devices on pseries so this patch
doesn't fix it there intentionally.
Fixes: b905f8cdca ("powerpc/eeh: EEH for pSeries hot plug")
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191016162833.22509-1-fbarrat@linux.ibm.com
When issuing a BMC soft poweroff during IPL, the poweroff can be lost
so the machine would not poweroff.
This is because opal messages can be received before the opal-power
code registered its notifiers.
Fix it by buffering messages. If we receive a message and do not yet
have a handler for that type, store the message and replay when a
handler for that type is registered.
Signed-off-by: Deb McLemore <debmc@linux.vnet.ibm.com>
[mpe: Single unlock path in opal_message_notifier_register(), tweak
comments/formatting and change log.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1526868278-4204-1-git-send-email-debmc@linux.vnet.ibm.com
On a 2-socket Power9 system with 32 cores/128 threads (SMT4) and 1TB
of memory running the following guest configs:
guest A:
- 224GB of memory
- 56 VCPUs (sockets=1,cores=28,threads=2), where:
VCPUs 0-1 are pinned to CPUs 0-3,
VCPUs 2-3 are pinned to CPUs 4-7,
...
VCPUs 54-55 are pinned to CPUs 108-111
guest B:
- 4GB of memory
- 4 VCPUs (sockets=1,cores=4,threads=1)
with the following workloads (with KSM and THP enabled in all):
guest A:
stress --cpu 40 --io 20 --vm 20 --vm-bytes 512M
guest B:
stress --cpu 4 --io 4 --vm 4 --vm-bytes 512M
host:
stress --cpu 4 --io 4 --vm 2 --vm-bytes 256M
the below soft-lockup traces were observed after an hour or so and
persisted until the host was reset (this was found to be reliably
reproducible for this configuration, for kernels 4.15, 4.18, 5.0,
and 5.3-rc5):
[ 1253.183290] rcu: INFO: rcu_sched self-detected stall on CPU
[ 1253.183319] rcu: 124-....: (5250 ticks this GP) idle=10a/1/0x4000000000000002 softirq=5408/5408 fqs=1941
[ 1256.287426] watchdog: BUG: soft lockup - CPU#105 stuck for 23s! [CPU 52/KVM:19709]
[ 1264.075773] watchdog: BUG: soft lockup - CPU#24 stuck for 23s! [worker:19913]
[ 1264.079769] watchdog: BUG: soft lockup - CPU#31 stuck for 23s! [worker:20331]
[ 1264.095770] watchdog: BUG: soft lockup - CPU#45 stuck for 23s! [worker:20338]
[ 1264.131773] watchdog: BUG: soft lockup - CPU#64 stuck for 23s! [avocado:19525]
[ 1280.408480] watchdog: BUG: soft lockup - CPU#124 stuck for 22s! [ksmd:791]
[ 1316.198012] rcu: INFO: rcu_sched self-detected stall on CPU
[ 1316.198032] rcu: 124-....: (21003 ticks this GP) idle=10a/1/0x4000000000000002 softirq=5408/5408 fqs=8243
[ 1340.411024] watchdog: BUG: soft lockup - CPU#124 stuck for 22s! [ksmd:791]
[ 1379.212609] rcu: INFO: rcu_sched self-detected stall on CPU
[ 1379.212629] rcu: 124-....: (36756 ticks this GP) idle=10a/1/0x4000000000000002 softirq=5408/5408 fqs=14714
[ 1404.413615] watchdog: BUG: soft lockup - CPU#124 stuck for 22s! [ksmd:791]
[ 1442.227095] rcu: INFO: rcu_sched self-detected stall on CPU
[ 1442.227115] rcu: 124-....: (52509 ticks this GP) idle=10a/1/0x4000000000000002 softirq=5408/5408 fqs=21403
[ 1455.111787] INFO: task worker:19907 blocked for more than 120 seconds.
[ 1455.111822] Tainted: G L 5.3.0-rc5-mdr-vanilla+ #1
[ 1455.111833] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1455.111884] INFO: task worker:19908 blocked for more than 120 seconds.
[ 1455.111905] Tainted: G L 5.3.0-rc5-mdr-vanilla+ #1
[ 1455.111925] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1455.111966] INFO: task worker:20328 blocked for more than 120 seconds.
[ 1455.111986] Tainted: G L 5.3.0-rc5-mdr-vanilla+ #1
[ 1455.111998] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1455.112048] INFO: task worker:20330 blocked for more than 120 seconds.
[ 1455.112068] Tainted: G L 5.3.0-rc5-mdr-vanilla+ #1
[ 1455.112097] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1455.112138] INFO: task worker:20332 blocked for more than 120 seconds.
[ 1455.112159] Tainted: G L 5.3.0-rc5-mdr-vanilla+ #1
[ 1455.112179] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1455.112210] INFO: task worker:20333 blocked for more than 120 seconds.
[ 1455.112231] Tainted: G L 5.3.0-rc5-mdr-vanilla+ #1
[ 1455.112242] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1455.112282] INFO: task worker:20335 blocked for more than 120 seconds.
[ 1455.112303] Tainted: G L 5.3.0-rc5-mdr-vanilla+ #1
[ 1455.112332] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1455.112372] INFO: task worker:20336 blocked for more than 120 seconds.
[ 1455.112392] Tainted: G L 5.3.0-rc5-mdr-vanilla+ #1
CPUs 45, 24, and 124 are stuck on spin locks, likely held by
CPUs 105 and 31.
CPUs 105 and 31 are stuck in smp_call_function_many(), waiting on
target CPU 42. For instance:
# CPU 105 registers (via xmon)
R00 = c00000000020b20c R16 = 00007d1bcd800000
R01 = c00000363eaa7970 R17 = 0000000000000001
R02 = c0000000019b3a00 R18 = 000000000000006b
R03 = 000000000000002a R19 = 00007d537d7aecf0
R04 = 000000000000002a R20 = 60000000000000e0
R05 = 000000000000002a R21 = 0801000000000080
R06 = c0002073fb0caa08 R22 = 0000000000000d60
R07 = c0000000019ddd78 R23 = 0000000000000001
R08 = 000000000000002a R24 = c00000000147a700
R09 = 0000000000000001 R25 = c0002073fb0ca908
R10 = c000008ffeb4e660 R26 = 0000000000000000
R11 = c0002073fb0ca900 R27 = c0000000019e2464
R12 = c000000000050790 R28 = c0000000000812b0
R13 = c000207fff623e00 R29 = c0002073fb0ca808
R14 = 00007d1bbee00000 R30 = c0002073fb0ca800
R15 = 00007d1bcd600000 R31 = 0000000000000800
pc = c00000000020b260 smp_call_function_many+0x3d0/0x460
cfar= c00000000020b270 smp_call_function_many+0x3e0/0x460
lr = c00000000020b20c smp_call_function_many+0x37c/0x460
msr = 900000010288b033 cr = 44024824
ctr = c000000000050790 xer = 0000000000000000 trap = 100
CPU 42 is running normally, doing VCPU work:
# CPU 42 stack trace (via xmon)
[link register ] c00800001be17188 kvmppc_book3s_radix_page_fault+0x90/0x2b0 [kvm_hv]
[c000008ed3343820] c000008ed3343850 (unreliable)
[c000008ed33438d0] c00800001be11b6c kvmppc_book3s_hv_page_fault+0x264/0xe30 [kvm_hv]
[c000008ed33439d0] c00800001be0d7b4 kvmppc_vcpu_run_hv+0x8dc/0xb50 [kvm_hv]
[c000008ed3343ae0] c00800001c10891c kvmppc_vcpu_run+0x34/0x48 [kvm]
[c000008ed3343b00] c00800001c10475c kvm_arch_vcpu_ioctl_run+0x244/0x420 [kvm]
[c000008ed3343b90] c00800001c0f5a78 kvm_vcpu_ioctl+0x470/0x7c8 [kvm]
[c000008ed3343d00] c000000000475450 do_vfs_ioctl+0xe0/0xc70
[c000008ed3343db0] c0000000004760e4 ksys_ioctl+0x104/0x120
[c000008ed3343e00] c000000000476128 sys_ioctl+0x28/0x80
[c000008ed3343e20] c00000000000b388 system_call+0x5c/0x70
--- Exception: c00 (System Call) at 00007d545cfd7694
SP (7d53ff7edf50) is in userspace
It was subsequently found that ipi_message[PPC_MSG_CALL_FUNCTION]
was set for CPU 42 by at least 1 of the CPUs waiting in
smp_call_function_many(), but somehow the corresponding
call_single_queue entries were never processed by CPU 42, causing the
callers to spin in csd_lock_wait() indefinitely.
Nick Piggin suggested something similar to the following sequence as
a possible explanation (interleaving of CALL_FUNCTION/RESCHEDULE
IPI messages seems to be most common, but any mix of CALL_FUNCTION and
!CALL_FUNCTION messages could trigger it):
CPU
X: smp_muxed_ipi_set_message():
X: smp_mb()
X: message[RESCHEDULE] = 1
X: doorbell_global_ipi(42):
X: kvmppc_set_host_ipi(42, 1)
X: ppc_msgsnd_sync()/smp_mb()
X: ppc_msgsnd() -> 42
42: doorbell_exception(): // from CPU X
42: ppc_msgsync()
105: smp_muxed_ipi_set_message():
105: smb_mb()
// STORE DEFERRED DUE TO RE-ORDERING
--105: message[CALL_FUNCTION] = 1
| 105: doorbell_global_ipi(42):
| 105: kvmppc_set_host_ipi(42, 1)
| 42: kvmppc_set_host_ipi(42, 0)
| 42: smp_ipi_demux_relaxed()
| 42: // returns to executing guest
| // RE-ORDERED STORE COMPLETES
->105: message[CALL_FUNCTION] = 1
105: ppc_msgsnd_sync()/smp_mb()
105: ppc_msgsnd() -> 42
42: local_paca->kvm_hstate.host_ipi == 0 // IPI ignored
105: // hangs waiting on 42 to process messages/call_single_queue
This can be prevented with an smp_mb() at the beginning of
kvmppc_set_host_ipi(), such that stores to message[<type>] (or other
state indicated by the host_ipi flag) are ordered vs. the store to
to host_ipi.
However, doing so might still allow for the following scenario (not
yet observed):
CPU
X: smp_muxed_ipi_set_message():
X: smp_mb()
X: message[RESCHEDULE] = 1
X: doorbell_global_ipi(42):
X: kvmppc_set_host_ipi(42, 1)
X: ppc_msgsnd_sync()/smp_mb()
X: ppc_msgsnd() -> 42
42: doorbell_exception(): // from CPU X
42: ppc_msgsync()
// STORE DEFERRED DUE TO RE-ORDERING
-- 42: kvmppc_set_host_ipi(42, 0)
| 42: smp_ipi_demux_relaxed()
| 105: smp_muxed_ipi_set_message():
| 105: smb_mb()
| 105: message[CALL_FUNCTION] = 1
| 105: doorbell_global_ipi(42):
| 105: kvmppc_set_host_ipi(42, 1)
| // RE-ORDERED STORE COMPLETES
-> 42: kvmppc_set_host_ipi(42, 0)
42: // returns to executing guest
105: ppc_msgsnd_sync()/smp_mb()
105: ppc_msgsnd() -> 42
42: local_paca->kvm_hstate.host_ipi == 0 // IPI ignored
105: // hangs waiting on 42 to process messages/call_single_queue
Fixing this scenario would require an smp_mb() *after* clearing
host_ipi flag in kvmppc_set_host_ipi() to order the store vs.
subsequent processing of IPI messages.
To handle both cases, this patch splits kvmppc_set_host_ipi() into
separate set/clear functions, where we execute smp_mb() prior to
setting host_ipi flag, and after clearing host_ipi flag. These
functions pair with each other to synchronize the sender and receiver
sides.
With that change in place the above workload ran for 20 hours without
triggering any lock-ups.
Fixes: 755563bc79 ("powerpc/powernv: Fixes for hypervisor doorbell handling") # v4.0
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190911223155.16045-1-mdroth@linux.vnet.ibm.com
With support to copy multiple kernel boot memory regions owing to copy
size limitation, also handle holes in the memory area to be preserved.
Support as many as 128 kernel boot memory regions. This allows having
an adequate FADump capture kernel size for different scenarios.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/156821385448.5656.6124791213910877759.stgit@hbathini.in.ibm.com
OPAL loads kernel & initrd at 512MB offset (256MB size), also exported
as ibm,opal/dump/fw-load-area. So, if boot memory size of FADump is
less than 768MB, kernel memory to be exported as '/proc/vmcore' would
be overwritten by f/w while loading kernel & initrd. To avoid such a
scenario, enforce a minimum boot memory size of 768MB on OPAL platform
and skip using FADump if a newer F/W version loads kernel & initrd
above 768MB.
Also, irrespective of RMA size, set the minimum boot memory size
expected on pseries platform at 320MB. This is to avoid inflating the
minimum memory requirements on systems with 512M/1024M RMA size.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/156821381414.5656.1592867278535469652.stgit@hbathini.in.ibm.com
Export /sys/firmware/opal/core file to analyze opal crashes. Since OPAL
core can be generated independent of CONFIG_FA_DUMP support in kernel,
add this support under a new kernel config option CONFIG_OPAL_CORE.
Also, avoid code duplication by moving common code used while exporting
/proc/vmcore and/or /sys/firmware/opal/core file(s).
Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/156821378503.5656.3693769384945087756.stgit@hbathini.in.ibm.com
Add a new kernel config option, CONFIG_PRESERVE_FA_DUMP that ensures
that crash data, from previously crash'ed kernel, is preserved. This
helps in cases where FADump is not enabled but the subsequent memory
preserving kernel boot is likely to process this crash data. One
typical usecase for this config option is petitboot kernel.
As OPAL allows registering address with it in the first kernel and
retrieving it after MPIPL, use it to store the top of boot memory.
A kernel that intends to preserve crash data retrieves it and avoids
using memory beyond this address.
Move arch_reserved_kernel_pages() function as it is needed for both
FA_DUMP and PRESERVE_FA_DUMP configurations.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/156821375751.5656.11459483669542541602.stgit@hbathini.in.ibm.com
Firmware provides architected register state data at the time of crash.
Process this data and build CPU notes to append to ELF core. In case
this data is missing or in unsupported format, at least append crashing
CPU's register data, to have something to work with in the vmcore file.
Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com>
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/156821367702.5656.5546683836236508389.stgit@hbathini.in.ibm.com
Make OPAL call to indicate that the dump is processed and the metadata
area in OPAL can be cleared/released. Also, setup/initialize FADump
for re-registration.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/156821356046.5656.12270927048195494911.stgit@hbathini.in.ibm.com
If all kernel boot memory regions are not registered for MPIPL before
system crashes, try processing the partial crashdump but warn the user
before proceeding.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/156821352793.5656.1734051341024721407.stgit@hbathini.in.ibm.com
Add support in the kernel to process the crash'ed kernel's memory
preserved during MPIPL and export it as /proc/vmcore file for the
userland scripts to filter and analyze it later.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/156821351482.5656.6255805804744333073.stgit@hbathini.in.ibm.com
Firmware uses a 32-bit field for size while copying/backing-up memory
during MPIPL. So, the maximum value that could be represented with
a PAGE_SIZE aligned 32-bit field will be the maximum copy size for a
region but FADump capture kernel usually needs more memory than that
to be preserved to avoid running into out of memory errors.
So, request firmware to copy multiple kernel boot memory regions
instead of just one (which worked fine for pseries as 64-bit field
was used for size there).
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/156821350193.5656.3664853158523582019.stgit@hbathini.in.ibm.com
During kexec boot, metadata address needs to be reset to avoid running
into errors interpreting stale metadata address, in case the kexec'ed
kernel crashes before metadata address could be setup again.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/156821346629.5656.10783321582005237813.stgit@hbathini.in.ibm.com
OPAL allows registering address with it in the first kernel and
retrieving it after MPIPL. Setup kernel metadata and register its
address with OPAL to use it for processing the crash dump.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/156821345011.5656.13567765019032928471.stgit@hbathini.in.ibm.com
MPIPL is Memory Preserving IPL supported from POWER9. This enables the
kernel to reset the system with memory 'preserved'. Also, it supports
copying memory from a source address to some destination address during
MPIPL boot. Add MPIPL interface definitions here to leverage these f/w
features in adding FADump support for PowerNV platform.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/156821340710.5656.10071829040515662624.stgit@hbathini.in.ibm.com
The builds breaks when IOMMU_API=n, eg. skiroot_defconfig:
arch/powerpc/platforms/powernv/npu-dma.c:96:28: error: 'get_gpu_pci_dev_and_pe' defined but not used
arch/powerpc/platforms/powernv/npu-dma.c:126:13: error: 'pnv_npu_set_window' defined but not used
Fixes: b4d37a7b69 ("powerpc/powernv: Remove unused pnv_npu_try_dma_set_bypass() function")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There's a bug in skiboot that causes the OPAL_XIVE_ALLOCATE_IRQ call
to return the 32-bit value 0xffffffff when OPAL has run out of IRQs.
Unfortunatelty, OPAL return values are signed 64-bit entities and
errors are supposed to be negative. If that happens, the linux code
confusingly treats 0xffffffff as a valid IRQ number and panics at some
point.
A fix was recently merged in skiboot:
e97391ae2bb5 ("xive: fix return value of opal_xive_allocate_irq()")
but we need a workaround anyway to support older skiboots already
in the field.
Internally convert 0xffffffff to OPAL_RESOURCE which is the usual error
returned upon resource exhaustion.
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/156821713818.1985334.14123187368108582810.stgit@bahia.lan
We have OPAL_MSG_PRD message type to pass prd related messages from
OPAL to `opal-prd`. It can handle messages upto 64 bytes. We have a
requirement to send bigger than 64 bytes of data from OPAL to
`opal-prd`. Lets add new message type (OPAL_MSG_PRD2) to pass bigger
data.
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
[mpe: Make the error string clear that it's the PRD2 event that failed]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190826065701.8853-2-hegdevasant@linux.vnet.ibm.com
Use "opal-msg-size" device tree property to allocate memory for
"opal_msg".
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
[mpe: s/uint32_t/u32/ and mark opal_msg_size as __ro_after_init]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190826065701.8853-1-hegdevasant@linux.vnet.ibm.com
Neither pnv_npu_try_dma_set_bypass() nor the pnv_npu_dma_set_32() and
pnv_npu_dma_set_bypass() helpers called by it are used anywhere in the
kernel tree, so remove them.
mpe: They're unused since 2d6ad41b2c ("powerpc/powernv: use the
generic iommu bypass code") removed the last usage.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190903165147.11099-1-hch@lst.de
Commit <684d984038aa> ('powerpc/powernv: Add debugfs interface for
imc-mode and imc') added debugfs interface for the nest imc pmu
devices to support changing of different ucode modes. Primarily adding
this capability for debug. But when doing so, the code did not
consider the case of cpu-less nodes. So when reading the _cmd_ or
_mode_ file of a cpu-less node will create this crash.
Faulting instruction address: 0xc0000000000d0d58
Oops: Kernel access of bad area, sig: 11 [#1]
...
CPU: 67 PID: 5301 Comm: cat Not tainted 5.2.0-rc6-next-20190627+ #19
NIP: c0000000000d0d58 LR: c00000000049aa18 CTR:c0000000000d0d50
REGS: c00020194548f9e0 TRAP: 0300 Not tainted (5.2.0-rc6-next-20190627+)
MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR:28022822 XER: 00000000
CFAR: c00000000049aa14 DAR: 000000000003fc08 DSISR:40000000 IRQMASK: 0
...
NIP imc_mem_get+0x8/0x20
LR simple_attr_read+0x118/0x170
Call Trace:
simple_attr_read+0x70/0x170 (unreliable)
debugfs_attr_read+0x6c/0xb0
__vfs_read+0x3c/0x70
vfs_read+0xbc/0x1a0
ksys_read+0x7c/0x140
system_call+0x5c/0x70
Patch fixes the issue with a more robust check for vbase to NULL.
Before patch, ls output for the debugfs imc directory
# ls /sys/kernel/debug/powerpc/imc/
imc_cmd_0 imc_cmd_251 imc_cmd_253 imc_cmd_255 imc_mode_0 imc_mode_251 imc_mode_253 imc_mode_255
imc_cmd_250 imc_cmd_252 imc_cmd_254 imc_cmd_8 imc_mode_250 imc_mode_252 imc_mode_254 imc_mode_8
After patch, ls output for the debugfs imc directory
# ls /sys/kernel/debug/powerpc/imc/
imc_cmd_0 imc_cmd_8 imc_mode_0 imc_mode_8
Actual bug here is that, we have two loops with potentially different
loop counts. That is, in imc_get_mem_addr_nest(), loop count is
obtained from the dt entries. But in case of export_imc_mode_and_cmd(),
loop was based on for_each_nid() count. Patch fixes the loop count in
latter based on the struct mem_info. Ideally it would be better to
have array size in struct imc_pmu.
Fixes: 684d984038 ('powerpc/powernv: Add debugfs interface for imc-mode and imc')
Reported-by: Qian Cai <cai@lca.pw>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190827101635.6942-1-maddy@linux.vnet.ibm.com
Currently we check that an IODA2 compatible PHB is upstream of this slot.
This is mainly to avoid pnv_php creating slots for the various "virtual
PHBs" that we create for NVLink. There's no real need for this restriction
so allow it on IODA3.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190903101605.2890-10-oohall@gmail.com
When we reset PCI devices managed by a hotplug driver the reset may
generate spurious hotplug events that cause the PCI device we're resetting
to be torn down accidently. This is a problem for EEH (when the driver is
EEH aware) since we want to leave the OS PCI device state intact so that
the device can be re-set without losing any resources (network, disks,
etc) provided by the driver.
Generic PCI code provides the pci_bus_error_reset() function to handle
resetting a PCI Device (or bus) by using the reset method provided by the
hotplug slot driver. We can use this function if the EEH core has
requested a hot reset (common case) without tripping over the hotplug
driver.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190903101605.2890-8-oohall@gmail.com
Support for switching CAPI cards into and out of CAPI mode was removed a
while ago. Drop the comment since it's no longer relevant.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190903101605.2890-7-oohall@gmail.com
Re-use the code introduced in pseries to save and dump the contents
of the SLB in the case of an SLB involved machine check exception.
This patch also avoids allocating the SLB save array on pseries radix.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190802105709.27696-9-npiggin@gmail.com
The ultravisor (UV) provides an in-memory console which follows the
OPAL in-memory console structure.
This patch extends the OPAL msglog code to initialize the UV memory
console and provide the "/sys/firmware/ultravisor/msglog" interface
for userspace to view the UV message log.
Signed-off-by: Claudio Carvalho <cclaudio@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Claudio Carvalho <cclaudio@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190828130521.26764-2-mpe@ellerman.id.au
This patch refactors the code in opal-msglog that operates on the OPAL
memory console in order to make it cleaner and also allow the reuse of
the new memcons_* functions.
Signed-off-by: Claudio Carvalho <cclaudio@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Claudio Carvalho <cclaudio@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190828130521.26764-1-mpe@ellerman.id.au
LDBAR is a per-thread SPR populated and used by the thread-imc pmu
driver to dump the data counter into memory. It contains memory along
with few other configuration bits. LDBAR is populated and enabled only
when any of the thread imc pmu events are monitored.
In ultravisor enabled systems, LDBAR becomes ultravisor privileged and
an attempt to write to it will cause a Hypervisor Emulation Assistance
interrupt.
In ultravisor enabled systems, the ultravisor is responsible to maintain
the LDBAR (e.g. save and restore it).
This restricts LDBAR access to only when ultravisor is disabled.
Signed-off-by: Claudio Carvalho <cclaudio@linux.ibm.com>
Reviewed-by: Ram Pai <linuxram@us.ibm.com>
Reviewed-by: Ryan Grimm <grimm@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190822034838.27876-7-cclaudio@linux.ibm.com
In PEF enabled systems, some of the resources which were previously
hypervisor privileged are now ultravisor privileged and controlled by
the ultravisor firmware.
This adds FW_FEATURE_ULTRAVISOR to indicate if PEF is enabled.
The host kernel can use FW_FEATURE_ULTRAVISOR, for instance, to skip
accessing resources (e.g. PTCR and LDBAR) in case PEF is enabled.
Signed-off-by: Claudio Carvalho <cclaudio@linux.ibm.com>
[ andmike: Device node name to "ibm,ultravisor" ]
Signed-off-by: Michael Anderson <andmike@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190822034838.27876-4-cclaudio@linux.ibm.com
As now we have xchg_no_kill/tce_kill, these are not used anymore so
remove them.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190829085252.72370-6-aik@ozlabs.ru
At the moment updates in a TCE table are made by iommu_table_ops::exchange
which update one TCE and invalidates an entry in the PHB/NPU TCE cache
via set of registers called "TCE Kill" (hence the naming).
Writing a TCE is a simple xchg() but invalidating the TCE cache is
a relatively expensive OPAL call. Mapping a 100GB guest with PCI+NPU
passed through devices takes about 20s.
Thankfully we can do better. Since such big mappings happen at the boot
time and when memory is plugged/onlined (i.e. not often), these requests
come in 512 pages so we call call OPAL 512 times less which brings 20s
from the above to less than 10s. Also, since TCE caches can be flushed
entirely, calling OPAL for 512 TCEs helps skiboot [1] to decide whether
to flush the entire cache or not.
This implements 2 new iommu_table_ops callbacks:
- xchg_no_kill() to update a single TCE with no TCE invalidation;
- tce_kill() to invalidate multiple TCEs.
This uses the same xchg_no_kill() callback for IODA1/2.
This implements 2 new wrappers on top of the new callbacks similar to
the existing iommu_tce_xchg().
This does not use the new callbacks yet, the next patches will;
so this should not cause any behavioral change.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190829085252.72370-2-aik@ozlabs.ru
Convert existing messages, where appropriate, to use the eeh_edev_*
logging macros.
The only effect should be minor adjustments to the log messages, apart
from:
- A new message in pseries_eeh_probe() "Probing device" to match the
powernv case.
- The "Probing device" message in pnv_eeh_probe() is now generated
slightly later, which will mean that it is no longer emitted for
devices that aren't probed due to the initial checks.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ce505a0a7a4a5b0367f0f40f8b26e7c0a9cf4cb7.1565930772.git.sbobroff@linux.ibm.com
Now that EEH support for all devices (on PowerNV and pSeries) is
provided by the pcibios bus add device hooks, eeh_probe_devices() and
eeh_addr_cache_build() are redundant and can be removed.
Move the EEH enabled message into it's own function so that it can be
called from multiple places.
Note that previously on pSeries, useless EEH sysfs files were created
for some devices that did not have EEH support and this change
prevents them from being created.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/33b0a6339d5ac88693de092d6fba984f2a5add66.1565930772.git.sbobroff@linux.ibm.com
On PowerNV and pSeries, devices currently acquire EEH support from
several different places: Boot-time devices from eeh_probe_devices()
and eeh_addr_cache_build(), Virtual Function devices from the pcibios
bus add device hooks and hot plugged devices from pci_hp_add_devices()
(with other platforms using other methods as well). Unfortunately,
pSeries machines currently discover hot plugged devices using
pci_rescan_bus(), not pci_hp_add_devices(), and so those devices do
not receive EEH support.
Rather than adding another case for pci_rescan_bus(), this change
widens the scope of the pcibios bus add device hooks so that they can
handle all devices. As a side effect this also supports devices
discovered after manually rescanning via /sys/bus/pci/rescan.
Note that on PowerNV, this change allows the EEH subsystem to become
enabled after boot as long as it has not been forced off, which was
not previously possible (it was already possible on pSeries).
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/72ae8ae9c54097158894a52de23690448de38ea9.1565930772.git.sbobroff@linux.ibm.com
At the moment we create a small window only for 32bit devices, the window
maps 0..2GB of the PCI space only. For other devices we either use
a sketchy bypass or hardware bypass but the former can only work if
the amount of RAM is no bigger than the device's DMA mask and the latter
requires devices to support at least 59bit DMA.
This extends the default DMA window to the maximum size possible to allow
a wider DMA mask than just 32bit. The default window size is now limited
by the the iommu_table::it_map allocation bitmap which is a contiguous
array, 1 bit per an IOMMU page.
This increases the default IOMMU page size from hard coded 4K to
the system page size to allow wider DMA masks.
This increases the level number to not exceed the max order allocation
limit per TCE level. By the same time, this keeps minimal levels number
as 2 in order to save memory.
As the extended window now overlaps the 32bit MMIO region, this adds
an area reservation to iommu_init_table().
After this change the default window size is 0x80000000000==1<<43 so
devices limited to DMA mask smaller than the amount of system RAM can
still use more than just 2GB of memory for DMA.
This is an optimization and not a bug fix for DMA API usage.
With the on-demand allocation of indirect TCE table levels enabled and
2 levels, the first TCE level size is just
1<<ceil((log2(0x7ffffffffff+1)-16)/2)=16384 TCEs or 2 system pages.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190718051139.74787-5-aik@ozlabs.ru
We allocate only the first level of multilevel TCE tables for KVM
already (alloc_userspace_copy==true), and the rest is allocated on demand.
This is not enabled though for bare metal.
This removes the KVM limitation (implicit, via the alloc_userspace_copy
parameter) and always allocates just the first level. The on-demand
allocation of missing levels is already implemented.
As from now on DMA map might happen with disabled interrupts, this
allocates TCEs with GFP_ATOMIC; otherwise lockdep reports errors 1].
In practice just a single page is allocated there so chances for failure
are quite low.
To save time when creating a new clean table, this skips non-allocated
indirect TCE entries in pnv_tce_free just like we already do in
the VFIO IOMMU TCE driver.
This changes the default level number from 1 to 2 to reduce the amount
of memory required for the default 32bit DMA window at the boot time.
The default window size is up to 2GB which requires 4MB of TCEs which is
unlikely to be used entirely or at all as most devices these days are
64bit capable so by switching to 2 levels by default we save 4032KB of
RAM per a device.
While at this, add __GFP_NOWARN to alloc_pages_node() as the userspace
can trigger this path via VFIO, see the failure and try creating a table
again with different parameters which might succeed.
[1]:
===
BUG: sleeping function called from invalid context at mm/page_alloc.c:4596
in_atomic(): 1, irqs_disabled(): 1, pid: 1038, name: scsi_eh_1
2 locks held by scsi_eh_1/1038:
#0: 000000005efd659a (&host->eh_mutex){+.+.}, at: ata_eh_acquire+0x34/0x80
#1: 0000000006cf56a6 (&(&host->lock)->rlock){....}, at: ata_exec_internal_sg+0xb0/0x5c0
irq event stamp: 500
hardirqs last enabled at (499): [<c000000000cb8a74>] _raw_spin_unlock_irqrestore+0x94/0xd0
hardirqs last disabled at (500): [<c000000000cb85c4>] _raw_spin_lock_irqsave+0x44/0x120
softirqs last enabled at (0): [<c000000000101120>] copy_process.isra.4.part.5+0x640/0x1a80
softirqs last disabled at (0): [<0000000000000000>] 0x0
CPU: 73 PID: 1038 Comm: scsi_eh_1 Not tainted 5.2.0-rc6-le_nv2_aikATfstn1-p1 #634
Call Trace:
[c000003d064cef50] [c000000000c8e6c4] dump_stack+0xe8/0x164 (unreliable)
[c000003d064cefa0] [c00000000014ed78] ___might_sleep+0x2f8/0x310
[c000003d064cf020] [c0000000003ca084] __alloc_pages_nodemask+0x2a4/0x1560
[c000003d064cf220] [c0000000000c2530] pnv_alloc_tce_level.isra.0+0x90/0x130
[c000003d064cf290] [c0000000000c2888] pnv_tce+0x128/0x3b0
[c000003d064cf360] [c0000000000c2c00] pnv_tce_build+0xb0/0xf0
[c000003d064cf3c0] [c0000000000bbd9c] pnv_ioda2_tce_build+0x3c/0xb0
[c000003d064cf400] [c00000000004cfe0] ppc_iommu_map_sg+0x210/0x550
[c000003d064cf510] [c00000000004b7a4] dma_iommu_map_sg+0x74/0xb0
[c000003d064cf530] [c000000000863944] ata_qc_issue+0x134/0x470
[c000003d064cf5b0] [c000000000863ec4] ata_exec_internal_sg+0x244/0x5c0
[c000003d064cf700] [c0000000008642d0] ata_exec_internal+0x90/0xe0
[c000003d064cf780] [c0000000008650ac] ata_dev_read_id+0x2ec/0x640
[c000003d064cf8d0] [c000000000878e28] ata_eh_recover+0x948/0x16d0
[c000003d064cfa10] [c00000000087d760] sata_pmp_error_handler+0x480/0xbf0
[c000003d064cfbc0] [c000000000884624] ahci_error_handler+0x74/0xe0
[c000003d064cfbf0] [c000000000879fa8] ata_scsi_port_error_handler+0x2d8/0x7c0
[c000003d064cfca0] [c00000000087a544] ata_scsi_error+0xb4/0x100
[c000003d064cfd00] [c000000000802450] scsi_error_handler+0x120/0x510
[c000003d064cfdb0] [c000000000140c48] kthread+0x1b8/0x1c0
[c000003d064cfe20] [c00000000000bd8c] ret_from_kernel_thread+0x5c/0x70
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
irq event stamp: 2305
========================================================
hardirqs last enabled at (2305): [<c00000000000e4c8>] fast_exc_return_irq+0x28/0x34
hardirqs last disabled at (2303): [<c000000000cb9fd0>] __do_softirq+0x4a0/0x654
WARNING: possible irq lock inversion dependency detected
5.2.0-rc6-le_nv2_aikATfstn1-p1 #634 Tainted: G W
softirqs last enabled at (2304): [<c000000000cba054>] __do_softirq+0x524/0x654
softirqs last disabled at (2297): [<c00000000010f278>] irq_exit+0x128/0x180
--------------------------------------------------------
swapper/0/0 just changed the state of lock:
0000000006cf56a6 (&(&host->lock)->rlock){-...}, at: ahci_single_level_irq_intr+0xac/0x120
but this lock took another, HARDIRQ-unsafe lock in the past:
(fs_reclaim){+.+.}
and interrupts could create inverse lock ordering between them.
other info that might help us debug this:
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(fs_reclaim);
local_irq_disable();
lock(&(&host->lock)->rlock);
lock(fs_reclaim);
<Interrupt>
lock(&(&host->lock)->rlock);
*** DEADLOCK ***
no locks held by swapper/0/0.
the shortest dependencies between 2nd lock and 1st lock:
-> (fs_reclaim){+.+.} ops: 167579 {
HARDIRQ-ON-W at:
lock_acquire+0xf8/0x2a0
fs_reclaim_acquire.part.23+0x44/0x60
kmem_cache_alloc_node_trace+0x80/0x590
alloc_desc+0x64/0x270
__irq_alloc_descs+0x2e4/0x3a0
irq_domain_alloc_descs+0xb0/0x150
irq_create_mapping+0x168/0x2c0
xics_smp_probe+0x2c/0x98
pnv_smp_probe+0x40/0x9c
smp_prepare_cpus+0x524/0x6c4
kernel_init_freeable+0x1b4/0x650
kernel_init+0x2c/0x148
ret_from_kernel_thread+0x5c/0x70
SOFTIRQ-ON-W at:
lock_acquire+0xf8/0x2a0
fs_reclaim_acquire.part.23+0x44/0x60
kmem_cache_alloc_node_trace+0x80/0x590
alloc_desc+0x64/0x270
__irq_alloc_descs+0x2e4/0x3a0
irq_domain_alloc_descs+0xb0/0x150
irq_create_mapping+0x168/0x2c0
xics_smp_probe+0x2c/0x98
pnv_smp_probe+0x40/0x9c
smp_prepare_cpus+0x524/0x6c4
kernel_init_freeable+0x1b4/0x650
kernel_init+0x2c/0x148
ret_from_kernel_thread+0x5c/0x70
INITIAL USE at:
lock_acquire+0xf8/0x2a0
fs_reclaim_acquire.part.23+0x44/0x60
kmem_cache_alloc_node_trace+0x80/0x590
alloc_desc+0x64/0x270
__irq_alloc_descs+0x2e4/0x3a0
irq_domain_alloc_descs+0xb0/0x150
irq_create_mapping+0x168/0x2c0
xics_smp_probe+0x2c/0x98
pnv_smp_probe+0x40/0x9c
smp_prepare_cpus+0x524/0x6c4
kernel_init_freeable+0x1b4/0x650
kernel_init+0x2c/0x148
ret_from_kernel_thread+0x5c/0x70
}
===
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190718051139.74787-4-aik@ozlabs.ru
pnv_tce() returns a pointer to a TCE entry and originally a TCE table
would be pre-allocated. For the default case of 2GB window the table
needs only a single level and that is fine. However if more levels are
requested, it is possible to get a race when 2 threads want a pointer
to a TCE entry from the same page of TCEs.
This adds cmpxchg to handle the race. Note that once TCE is non-zero,
it cannot become zero again.
Fixes: a68bd1267b ("powerpc/powernv/ioda: Allocate indirect TCE levels on demand")
CC: stable@vger.kernel.org # v4.19+
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190718051139.74787-2-aik@ozlabs.ru
Currently the OPAL symbol map is globally readable, which seems bad as
it contains physical addresses.
Restrict it to root.
Fixes: c8742f8512 ("powerpc/powernv: Expose OPAL firmware symbol map")
Cc: stable@vger.kernel.org # v3.19+
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190503075253.22798-1-ajd@linux.ibm.com
Once upon a time, the SCOM access code was used by the WSP platform as
well as powernv. Thus it made sense to have a generic SCOM access
interface to abstract between different platforms.
Now that it's just powernv, with no other platforms currently on the
horizon, let's rip out scom_controller and make everything much
simpler and more direct.
While we're here, fix up the comment block at the top.
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190509051119.7694-3-ajd@linux.ibm.com
Nothing is using scom_map_device() or scom_find_parent(). Remove them.
Also don't export scom_controller, there are no other users of it.
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190509051119.7694-2-ajd@linux.ibm.com
The powernv platform is the only one that directly accesses SCOMs.
Move the support code to platforms/powernv, and get rid of the
PPC_SCOM Kconfig option, as SCOM support is always selected when
compiling for powernv.
This also means that the Kconfig item for CONFIG_SCOM_DEBUGFS will
show up in menuconfig in the platform menu, rather than at the root,
which is a much better location.
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190509051119.7694-1-ajd@linux.ibm.com
walk_memory_range() was once used to iterate over sections. Now, it
iterates over memory blocks. Rename the function, fixup the
documentation.
Also, pass start+size instead of PFNs, which is what most callers
already have at hand. (we'll rework link_mem_sections() most probably
soon)
Follow-up patches will rework, simplify, and move walk_memory_blocks()
to drivers/base/memory.c.
Note: walk_memory_blocks() only works correctly right now if the
start_pfn is aligned to a section start. This is the case right now,
but we'll generalize the function in a follow up patch so the semantics
match the documentation.
[akpm@linux-foundation.org: remove unused variable]
Link: http://lkml.kernel.org/r/20190614100114.311-5-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Rashmica Gupta <rashmica.g@gmail.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Arun KS <arunks@codeaurora.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Notable changes:
- Removal of the NPU DMA code, used by the out-of-tree Nvidia driver, as well
as some other functions only used by drivers that haven't (yet?) made it
upstream.
- A fix for a bug in our handling of hardware watchpoints (eg. perf record -e
mem: ...) which could lead to register corruption and kernel crashes.
- Enable HAVE_ARCH_HUGE_VMAP, which allows us to use large pages for vmalloc
when using the Radix MMU.
- A large but incremental rewrite of our exception handling code to use gas
macros rather than multiple levels of nested CPP macros.
And the usual small fixes, cleanups and improvements.
Thanks to:
Alastair D'Silva, Alexey Kardashevskiy, Andreas Schwab, Aneesh Kumar K.V, Anju
T Sudhakar, Anton Blanchard, Arnd Bergmann, Athira Rajeev, Cédric Le Goater,
Christian Lamparter, Christophe Leroy, Christophe Lombard, Christoph Hellwig,
Daniel Axtens, Denis Efremov, Enrico Weigelt, Frederic Barrat, Gautham R.
Shenoy, Geert Uytterhoeven, Geliang Tang, Gen Zhang, Greg Kroah-Hartman, Greg
Kurz, Gustavo Romero, Krzysztof Kozlowski, Madhavan Srinivasan, Masahiro
Yamada, Mathieu Malaterre, Michael Neuling, Nathan Lynch, Naveen N. Rao,
Nicholas Piggin, Nishad Kamdar, Oliver O'Halloran, Qian Cai, Ravi Bangoria,
Sachin Sant, Sam Bobroff, Satheesh Rajendran, Segher Boessenkool, Shaokun
Zhang, Shawn Anastasio, Stewart Smith, Suraj Jitindar Singh, Thiago Jung
Bauermann, YueHaibing.
-----BEGIN PGP SIGNATURE-----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=3dBZ
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Notable changes:
- Removal of the NPU DMA code, used by the out-of-tree Nvidia driver,
as well as some other functions only used by drivers that haven't
(yet?) made it upstream.
- A fix for a bug in our handling of hardware watchpoints (eg. perf
record -e mem: ...) which could lead to register corruption and
kernel crashes.
- Enable HAVE_ARCH_HUGE_VMAP, which allows us to use large pages for
vmalloc when using the Radix MMU.
- A large but incremental rewrite of our exception handling code to
use gas macros rather than multiple levels of nested CPP macros.
And the usual small fixes, cleanups and improvements.
Thanks to: Alastair D'Silva, Alexey Kardashevskiy, Andreas Schwab,
Aneesh Kumar K.V, Anju T Sudhakar, Anton Blanchard, Arnd Bergmann,
Athira Rajeev, Cédric Le Goater, Christian Lamparter, Christophe
Leroy, Christophe Lombard, Christoph Hellwig, Daniel Axtens, Denis
Efremov, Enrico Weigelt, Frederic Barrat, Gautham R. Shenoy, Geert
Uytterhoeven, Geliang Tang, Gen Zhang, Greg Kroah-Hartman, Greg Kurz,
Gustavo Romero, Krzysztof Kozlowski, Madhavan Srinivasan, Masahiro
Yamada, Mathieu Malaterre, Michael Neuling, Nathan Lynch, Naveen N.
Rao, Nicholas Piggin, Nishad Kamdar, Oliver O'Halloran, Qian Cai, Ravi
Bangoria, Sachin Sant, Sam Bobroff, Satheesh Rajendran, Segher
Boessenkool, Shaokun Zhang, Shawn Anastasio, Stewart Smith, Suraj
Jitindar Singh, Thiago Jung Bauermann, YueHaibing"
* tag 'powerpc-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (163 commits)
powerpc/powernv/idle: Fix restore of SPRN_LDBAR for POWER9 stop state.
powerpc/eeh: Handle hugepages in ioremap space
ocxl: Update for AFU descriptor template version 1.1
powerpc/boot: pass CONFIG options in a simpler and more robust way
powerpc/boot: add {get, put}_unaligned_be32 to xz_config.h
powerpc/irq: Don't WARN continuously in arch_local_irq_restore()
powerpc/module64: Use symbolic instructions names.
powerpc/module32: Use symbolic instructions names.
powerpc: Move PPC_HA() PPC_HI() and PPC_LO() to ppc-opcode.h
powerpc/module64: Fix comment in R_PPC64_ENTRY handling
powerpc/boot: Add lzo support for uImage
powerpc/boot: Add lzma support for uImage
powerpc/boot: don't force gzipped uImage
powerpc/8xx: Add microcode patch to move SMC parameter RAM.
powerpc/8xx: Use IO accessors in microcode programming.
powerpc/8xx: replace #ifdefs by IS_ENABLED() in microcode.c
powerpc/8xx: refactor programming of microcode CPM params.
powerpc/8xx: refactor printing of microcode patch name.
powerpc/8xx: Refactor microcode write
powerpc/8xx: refactor writing of CPM microcode arrays
...
commit 10d91611f4 ("powerpc/64s: Reimplement book3s idle code in C")
reimplemented book3S code to pltform/powernv/idle.c. But when doing so
missed to add the per-thread LDBAR update in the core_woken path of
the power9_idle_stop(). Patch fixes the same.
Fixes: 10d91611f4 ("powerpc/64s: Reimplement book3s idle code in C")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190702105836.26695-1-maddy@linux.vnet.ibm.com
If the previous comment made sense, continue debugging or call your
doctor immediately.
Signed-off-by: Stewart Smith <stewart@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The powernv platform uses @dma_iommu_ops for non-bypass DMA. These ops
need an iommu_table pointer which is stored in
dev->archdata.iommu_table_base. It is initialized during
pcibios_setup_device() which handles boot time devices. However when a
device is taken from the system in order to pass it through, the
default IOMMU table is destroyed but the pointer in a device is not
updated; also when a device is returned back to the system, a new
table pointer is not stored in dev->archdata.iommu_table_base either.
So when a just returned device tries using IOMMU, it crashes on
accessing stale iommu_table or its members.
This calls set_iommu_table_base() when the default window is created.
Note it used to be there before but was wrongly removed (see "fixes").
It did not appear before as these days most devices simply use bypass.
This adds set_iommu_table_base(NULL) when a device is taken from the
system to make it clear that IOMMU DMA cannot be used past that point.
Fixes: c4e9d3c1e6 ("powerpc/powernv/pseries: Rework device adding to IOMMU groups")
Cc: stable@vger.kernel.org # v5.0+
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This makes it clear to the caller that it can only be used on POWER9
and later CPUs.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Use "ISA_3_0" rather than "ARCH_300"]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
These two function have never been used anywhere in the kernel tree
since they were added to the kernel.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
None of these routines were ever used anywhere in the kernel tree
since they were added to the kernel.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
These have been unused anywhere in the kernel tree ever since they've
been added to the kernel.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This function has never been used anywhere in the kernel tree since it
was added to the tree. We also now have proper PCIe P2P APIs in the core
kernel, and any new P2P support should be using those.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
pr_info shows SPR and timebase as a decimal value with a '0x'
prefix, which is somewhat misleading.
Fix it to print hexadecimal, as was intended.
Fixes: 10d91611f4 ("powerpc/64s: Reimplement book3s idle code in C")
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
A minor fix to our IMC PMU code to print a less confusing error message when the
driver can't initialise properly.
A fix for a bug where a user requesting an unsupported branch sampling filter
can corrupt PMU state, preventing the PMU from counting properly.
And finally a fix for a bug in our support for kexec_file_load(), which
prevented loading a kernel and initramfs. Most versions of kexec don't yet use
kexec_file_load().
Thanks to:
Anju T Sudhakar, Dave Young, Madhavan Srinivasan, Ravi Bangoria, Thiago Jung
Bauermann.
-----BEGIN PGP SIGNATURE-----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=ilhV
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"A minor fix to our IMC PMU code to print a less confusing error
message when the driver can't initialise properly.
A fix for a bug where a user requesting an unsupported branch sampling
filter can corrupt PMU state, preventing the PMU from counting
properly.
And finally a fix for a bug in our support for kexec_file_load(),
which prevented loading a kernel and initramfs. Most versions of kexec
don't yet use kexec_file_load().
Thanks to: Anju T Sudhakar, Dave Young, Madhavan Srinivasan, Ravi
Bangoria, Thiago Jung Bauermann"
* tag 'powerpc-5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/kexec: Fix loading of kernel + initramfs with kexec_file_load()
powerpc/perf: Fix MMCRA corruption by bhrb_filter
powerpc/powernv: Return for invalid IMC domain
Since 902bdc5745, get_pci_dev() calls pci_get_domain_bus_and_slot(). This
has the effect of incrementing the reference count of the PCI device, as
explained in drivers/pci/search.c:
* Given a PCI domain, bus, and slot/function number, the desired PCI
* device is located in the list of PCI devices. If the device is
* found, its reference count is increased and this function returns a
* pointer to its data structure. The caller must decrement the
* reference count by calling pci_dev_put(). If no device is found,
* %NULL is returned.
Nothing was done to call pci_dev_put() and the reference count of GPU and
NPU PCI devices rockets up.
A natural way to fix this would be to teach the callers about the change,
so that they call pci_dev_put() when done with the pointer. This turns
out to be quite intrusive, as it affects many paths in npu-dma.c,
pci-ioda.c and vfio_pci_nvlink2.c. Also, the issue appeared in 4.16 and
some affected code got moved around since then: it would be problematic
to backport the fix to stable releases.
All that code never cared for reference counting anyway. Call pci_dev_put()
from get_pci_dev() to revert to the previous behavior.
Fixes: 902bdc5745 ("powerpc/powernv/idoa: Remove unnecessary pcidev from pci_dn")
Cc: stable@vger.kernel.org # v4.16
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
If the kernel is notified of an HMI caused by the NPU2, it's currently
not being recognized and it logs the default message:
Unknown Malfunction Alert of type 3
The NPU on Power 9 has 3 Fault Isolation Registers, so that's a lot of
possible causes, but we should at least log that it's an NPU problem
and report which FIR and which bit were raised if opal gave us the
information.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The first machines to ship with OPAL firmware all got firmware updates
that have the new call, but just in case someone is foolish enough to
believe the first 4 months of firmware is the best, we keep this code
around.
Comment is updated to not refer to late 2014 as recent or the future.
Signed-off-by: Stewart Smith <stewart@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of version 2 of the gnu general public license as
published by the free software foundation
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 107 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528171438.615055994@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 655 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
59 temple place suite 330 boston ma 02111 1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1334 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or
later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 4 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190523091650.480557885@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently init_imc_pmu() can fail either because we try to register an
IMC unit with an invalid domain (i.e an IMC node not supported by the
kernel) or something went wrong while registering a valid IMC unit. In
both the cases kernel provides a 'Register failed' error message.
For example when trace-imc node is not supported by the kernel, but
skiboot advertises a trace-imc node we print:
IMC Unknown Device type
IMC PMU (null) Register failed
To avoid confusion just print the unknown device type message, before
attempting PMU registration, so the second message isn't printed.
Fixes: 8f95faaac5 ("powerpc/powernv: Detect and create IMC device")
Reported-by: Pavaman Subramaniyam <pavsubra@in.ibm.com>
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
[mpe: Reword change log a bit]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not see http www gnu org licenses
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details [based]
[from] [clk] [highbank] [c] you should have received a copy of the
gnu general public license along with this program if not see http
www gnu org licenses
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 355 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154041.837383322@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Patch detects trace-imc events, does memory initilizations for each online
cpu, and registers cpuhotplug call-backs.
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The data structure (i.e struct imc_mem_info) to hold the memory address
information for nest imc units is allocated based on the number of nodes
in the system.
nest_imc_event_init() traverse this struct array to calculate the memory
base address for the event-cpu. If we fail to find a match for the event
cpu's chip-id in imc_mem_info struct array, then the do-while loop will
iterate until we crash.
Fix this by changing the loop exit condition based on the number of
non zero vbase elements in the array, since the allocation is done for
nr_chips + 1.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 885dcd709b ("powerpc/perf: Add nest IMC PMU support")
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
On TOD/TB errors timebase register stops/freezes until HMI error recovery
gets TOD/TB back into running state. On successful recovery, TB starts
running again and udelay() that relies on TB value continues to function
properly. But in case when HMI fails to recover from TOD/TB errors, the
TB register stay freezed. With TB not running the __delay() function
keeps looping and never return. If __delay() is called while in panic
path then system hangs and never reboots after panic.
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently all machine check errors are printed as severe errors which
isn't correct. Print soft errors as warning instead of severe errors.
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When the return value type was changed from int to bool, few places
were left unchanged, this fixes them. We did not hit these failures as
the first one is not happening at all and the second one is little
more likely to happen if the user switches a 33..58bit DMA capable
device between the VFIO and vendor drivers and there are not so many
of these.
Fixes: 2d6ad41b2c ("powerpc/powernv: use the generic iommu bypass code")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This is an implementation of commits 53a712bae5
("powerpc/powernv/idle: Restore AMR/UAMOR/AMOR after idle") and
a3f3072db6 ("powerpc/powernv/idle: Restore IAMR after idle") using
the new C-based idle code.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Extract from Nick's patch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reimplement Book3S idle code in C, moving POWER7/8/9 implementation
speific HV idle code to the powernv platform code.
Book3S assembly stubs are kept in common code and used only to save
the stack frame and non-volatile GPRs before executing architected
idle instructions, and restoring the stack and reloading GPRs then
returning to C after waking from idle.
The complex logic dealing with threads and subcores, locking, SPRs,
HMIs, timebase resync, etc., is all done in C which makes it more
maintainable.
This is not a strict translation to C code, there are some
significant differences:
- Idle wakeup no longer uses the ->cpu_restore call to reinit SPRs,
but saves and restores them itself.
- The optimisation where EC=ESL=0 idle modes did not have to save GPRs
or change MSR is restored, because it's now simple to do. ESL=1
sleeps that do not lose GPRs can use this optimization too.
- KVM secondary entry and cede is now more of a call/return style
rather than branchy. nap_state_lost is not required because KVM
always returns via NVGPR restoring path.
- KVM secondary wakeup from offline sequence is moved entirely into
the offline wakeup, which avoids a hwsync in the normal idle wakeup
path.
Performance measured with context switch ping-pong on different
threads or cores, is possibly improved a small amount, 1-3% depending
on stop state and core vs thread test for shallow states. Deep states
it's in the noise compared with other latencies.
KVM improvements:
- Idle sleepers now always return to caller rather than branch out
to KVM first.
- This allows optimisations like very fast return to caller when no
state has been lost.
- KVM no longer requires nap_state_lost because it controls NVGPR
save/restore itself on the way in and out.
- The heavy idle wakeup KVM request check can be moved out of the
normal host idle code and into the not-performance-critical offline
code.
- KVM nap code now returns from where it is called, which makes the
flow a bit easier to follow.
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Squash the KVM changes in]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use new helper pci_dev_id() to simplify the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
sparse complains a lot about opal-call.c:
arch/powerpc/platforms/powernv/opal-call.c:128:1: warning: symbol 'opal_invalid_call' was not declared. Should it be static?
arch/powerpc/platforms/powernv/opal-call.c:129:1: warning: symbol 'opal_console_write' was not declared. Should it be static?
arch/powerpc/platforms/powernv/opal-call.c:130:1: warning: symbol 'opal_console_read' was not declared. Should it be static?
Those symbols are forward declared in opal.h, but we can't include that
because the function signatures in opal.h are different. So instead, just
add an extra forward declaration to the OPAL_CALL macro to shut sparse up.
Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The support for XIVE native exploitation mode in Linux/KVM needs a
couple more OPAL calls to get and set the state of the XIVE internal
structures being used by a sPAPR guest.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
One fix to prevent runtime allocation of 16GB pages when running in a VM (as
opposed to bare metal), because it doesn't work.
A small fix to our recently added KCOV support to exempt some more code from
being instrumented.
Plus a few minor build fixes, a small dead code removal and a defconfig update.
Thanks to:
Alexey Kardashevskiy, Aneesh Kumar K.V, Christophe Leroy, Jason Yan, Joel
Stanley, Mahesh Salgaonkar, Mathieu Malaterre.
-----BEGIN PGP SIGNATURE-----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=6cp4
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"One fix to prevent runtime allocation of 16GB pages when running in a
VM (as opposed to bare metal), because it doesn't work.
A small fix to our recently added KCOV support to exempt some more
code from being instrumented.
Plus a few minor build fixes, a small dead code removal and a
defconfig update.
Thanks to: Alexey Kardashevskiy, Aneesh Kumar K.V, Christophe Leroy,
Jason Yan, Joel Stanley, Mahesh Salgaonkar, Mathieu Malaterre"
* tag 'powerpc-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Include <asm/nmi.h> header file to fix a warning
powerpc/powernv: Fix compile without CONFIG_TRACEPOINTS
powerpc/mm: Disable kcov for SLB routines
powerpc: remove dead code in head_fsl_booke.S
powerpc/configs: Sync skiroot defconfig
powerpc/hugetlb: Don't do runtime allocation of 16G pages in LPAR configuration
The functions returns s64 but the return statement is missing.
This adds the missing return statement.
Fixes: 75d9fc7fd9 ("powerpc/powernv: move OPAL call wrapper tracing and interrupt handling to C")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add check for the return value of memblock_alloc*() functions and call
panic() in case of error. The panic message repeats the one used by
panicing memblock allocators with adjustment of parameters to include
only relevant ones.
The replacement was mostly automated with semantic patches like the one
below with manual massaging of format strings.
@@
expression ptr, size, align;
@@
ptr = memblock_alloc(size, align);
+ if (!ptr)
+ panic("%s: Failed to allocate %lu bytes align=0x%lx\n", __func__, size, align);
[anders.roxell@linaro.org: use '%pa' with 'phys_addr_t' type]
Link: http://lkml.kernel.org/r/20190131161046.21886-1-anders.roxell@linaro.org
[rppt@linux.ibm.com: fix format strings for panics after memblock_alloc]
Link: http://lkml.kernel.org/r/1548950940-15145-1-git-send-email-rppt@linux.ibm.com
[rppt@linux.ibm.com: don't panic if the allocation in sparse_buffer_init fails]
Link: http://lkml.kernel.org/r/20190131074018.GD28876@rapoport-lnx
[akpm@linux-foundation.org: fix xtensa printk warning]
Link: http://lkml.kernel.org/r/1548057848-15136-20-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Guo Ren <ren_guo@c-sky.com> [c-sky]
Acked-by: Paul Burton <paul.burton@mips.com> [MIPS]
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> [s390]
Reviewed-by: Juergen Gross <jgross@suse.com> [Xen]
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa]
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Christoph Hellwig <hch@lst.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge more updates from Andrew Morton:
- some of the rest of MM
- various misc things
- dynamic-debug updates
- checkpatch
- some epoll speedups
- autofs
- rapidio
- lib/, lib/lzo/ updates
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (83 commits)
samples/mic/mpssd/mpssd.h: remove duplicate header
kernel/fork.c: remove duplicated include
include/linux/relay.h: fix percpu annotation in struct rchan
arch/nios2/mm/fault.c: remove duplicate include
unicore32: stop printing the virtual memory layout
MAINTAINERS: fix GTA02 entry and mark as orphan
mm: create the new vm_fault_t type
arm, s390, unicore32: remove oneliner wrappers for memblock_alloc()
arch: simplify several early memory allocations
openrisc: simplify pte_alloc_one_kernel()
sh: prefer memblock APIs returning virtual address
microblaze: prefer memblock API returning virtual address
powerpc: prefer memblock APIs returning virtual address
lib/lzo: separate lzo-rle from lzo
lib/lzo: implement run-length encoding
lib/lzo: fast 8-byte copy on arm64
lib/lzo: 64-bit CTZ on arm64
lib/lzo: tidy-up ifdefs
ipc/sem.c: replace kvmalloc/memset with kvzalloc and use struct_size
ipc: annotate implicit fall through
...
There are several early memory allocations in arch/ code that use
memblock_phys_alloc() to allocate memory, convert the returned physical
address to the virtual address and then set the allocated memory to
zero.
Exactly the same behaviour can be achieved simply by calling
memblock_alloc(): it allocates the memory in the same way as
memblock_phys_alloc(), then it performs the phys_to_virt() conversion
and clears the allocated memory.
Replace the longer sequence with a simpler call to memblock_alloc().
Link: http://lkml.kernel.org/r/1546248566-14910-6-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Notable changes:
- Enable THREAD_INFO_IN_TASK to move thread_info off the stack.
- A big series from Christoph reworking our DMA code to use more of the generic
infrastructure, as he said:
"This series switches the powerpc port to use the generic swiotlb and
noncoherent dma ops, and to use more generic code for the coherent direct
mapping, as well as removing a lot of dead code."
- Increase our vmalloc space to 512T with the Hash MMU on modern CPUs, allowing
us to support machines with larger amounts of total RAM or distance between
nodes.
- Two series from Christophe, one to optimise TLB miss handlers on 6xx, and
another to optimise the way STRICT_KERNEL_RWX is implemented on some 32-bit
CPUs.
- Support for KCOV coverage instrumentation which means we can run syzkaller
and discover even more bugs in our code.
And as always many clean-ups, reworks and minor fixes etc.
Thanks to:
Alan Modra, Alexey Kardashevskiy, Alistair Popple, Andrea Arcangeli, Andrew
Donnellan, Aneesh Kumar K.V, Aravinda Prasad, Balbir Singh, Brajeswar Ghosh,
Breno Leitao, Christian Lamparter, Christian Zigotzky, Christophe Leroy,
Christoph Hellwig, Corentin Labbe, Daniel Axtens, David Gibson, Diana Craciun,
Firoz Khan, Gustavo A. R. Silva, Igor Stoppa, Joe Lawrence, Joel Stanley,
Jonathan Neuschäfer, Jordan Niethe, Laurent Dufour, Madhavan Srinivasan, Mahesh
Salgaonkar, Mark Cave-Ayland, Masahiro Yamada, Mathieu Malaterre, Matteo Croce,
Meelis Roos, Michael W. Bringmann, Nathan Chancellor, Nathan Fontenot, Nicholas
Piggin, Nick Desaulniers, Nicolai Stange, Oliver O'Halloran, Paul Mackerras,
Peter Xu, PrasannaKumar Muralidharan, Qian Cai, Rashmica Gupta, Reza Arbab,
Robert P. J. Day, Russell Currey, Sabyasachi Gupta, Sam Bobroff, Sandipan Das,
Sergey Senozhatsky, Souptick Joarder, Stewart Smith, Tyrel Datwyler, Vaibhav
Jain, YueHaibing.
-----BEGIN PGP SIGNATURE-----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=Z9bb
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Notable changes:
- Enable THREAD_INFO_IN_TASK to move thread_info off the stack.
- A big series from Christoph reworking our DMA code to use more of
the generic infrastructure, as he said:
"This series switches the powerpc port to use the generic swiotlb
and noncoherent dma ops, and to use more generic code for the
coherent direct mapping, as well as removing a lot of dead
code."
- Increase our vmalloc space to 512T with the Hash MMU on modern
CPUs, allowing us to support machines with larger amounts of total
RAM or distance between nodes.
- Two series from Christophe, one to optimise TLB miss handlers on
6xx, and another to optimise the way STRICT_KERNEL_RWX is
implemented on some 32-bit CPUs.
- Support for KCOV coverage instrumentation which means we can run
syzkaller and discover even more bugs in our code.
And as always many clean-ups, reworks and minor fixes etc.
Thanks to: Alan Modra, Alexey Kardashevskiy, Alistair Popple, Andrea
Arcangeli, Andrew Donnellan, Aneesh Kumar K.V, Aravinda Prasad, Balbir
Singh, Brajeswar Ghosh, Breno Leitao, Christian Lamparter, Christian
Zigotzky, Christophe Leroy, Christoph Hellwig, Corentin Labbe, Daniel
Axtens, David Gibson, Diana Craciun, Firoz Khan, Gustavo A. R. Silva,
Igor Stoppa, Joe Lawrence, Joel Stanley, Jonathan Neuschäfer, Jordan
Niethe, Laurent Dufour, Madhavan Srinivasan, Mahesh Salgaonkar, Mark
Cave-Ayland, Masahiro Yamada, Mathieu Malaterre, Matteo Croce, Meelis
Roos, Michael W. Bringmann, Nathan Chancellor, Nathan Fontenot,
Nicholas Piggin, Nick Desaulniers, Nicolai Stange, Oliver O'Halloran,
Paul Mackerras, Peter Xu, PrasannaKumar Muralidharan, Qian Cai,
Rashmica Gupta, Reza Arbab, Robert P. J. Day, Russell Currey,
Sabyasachi Gupta, Sam Bobroff, Sandipan Das, Sergey Senozhatsky,
Souptick Joarder, Stewart Smith, Tyrel Datwyler, Vaibhav Jain,
YueHaibing"
* tag 'powerpc-5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (200 commits)
powerpc/32: Clear on-stack exception marker upon exception return
powerpc: Remove export of save_stack_trace_tsk_reliable()
powerpc/mm: fix "section_base" set but not used
powerpc/mm: Fix "sz" set but not used warning
powerpc/mm: Check secondary hash page table
powerpc: remove nargs from __SYSCALL
powerpc/64s: Fix unrelocated interrupt trampoline address test
powerpc/powernv/ioda: Fix locked_vm counting for memory used by IOMMU tables
powerpc/fsl: Fix the flush of branch predictor.
powerpc/powernv: Make opal log only readable by root
powerpc/xmon: Fix opcode being uninitialized in print_insn_powerpc
powerpc/powernv: move OPAL call wrapper tracing and interrupt handling to C
powerpc/64s: Fix data interrupts vs d-side MCE reentrancy
powerpc/64s: Prepare to handle data interrupts vs d-side MCE reentrancy
powerpc/64s: system reset interrupt preserve HSRRs
powerpc/64s: Fix HV NMI vs HV interrupt recoverability test
powerpc/mm/hash: Handle mmap_min_addr correctly in get_unmapped_area topdown search
powerpc/hugetlb: Handle mmap_min_addr correctly in get_unmapped_area callback
selftests/powerpc: Remove duplicate header
powerpc sstep: Add support for modsd, modud instructions
...
Patch series "Replace all open encodings for NUMA_NO_NODE", v3.
All these places for replacement were found by running the following
grep patterns on the entire kernel code. Please let me know if this
might have missed some instances. This might also have replaced some
false positives. I will appreciate suggestions, inputs and review.
1. git grep "nid == -1"
2. git grep "node == -1"
3. git grep "nid = -1"
4. git grep "node = -1"
This patch (of 2):
At present there are multiple places where invalid node number is
encoded as -1. Even though implicitly understood it is always better to
have macros in there. Replace these open encodings for an invalid node
number with the global macro NUMA_NO_NODE. This helps remove NUMA
related assumptions like 'invalid node' from various places redirecting
them to a common definition.
Link: http://lkml.kernel.org/r/1545127933-10711-2-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> [ixgbe]
Acked-by: Jens Axboe <axboe@kernel.dk> [mtip32xx]
Acked-by: Vinod Koul <vkoul@kernel.org> [dmaengine.c]
Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Acked-by: Doug Ledford <dledford@redhat.com> [drivers/infiniband]
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We store 2 multilevel tables in iommu_table - one for the hardware and
one with the corresponding userspace addresses. Before allocating
the tables, the iommu_table_group_ops::get_table_size() hook returns
the combined size of the two and VFIO SPAPR TCE IOMMU driver adjusts
the locked_vm counter correctly. When the table is actually allocated,
the amount of allocated memory is stored in iommu_table::it_allocated_size
and used to decrement the locked_vm counter when we release the memory
used by the table; .get_table_size() and .create_table() calculate it
independently but the result is expected to be the same.
However the allocator does not add the userspace table size to
.it_allocated_size so when we destroy the table because of VFIO PCI
unplug (i.e. VFIO container is gone but the userspace keeps running),
we decrement locked_vm by just a half of size of memory we are
releasing.
To make things worse, since we enabled on-demand allocation of
indirect levels, it_allocated_size contains only the amount of memory
actually allocated at the table creation time which can just be a
fraction. It is not a problem with incrementing locked_vm (as
get_table_size() value is used) but it is with decrementing.
As the result, we leak locked_vm and may not be able to allocate more
IOMMU tables after few iterations of hotplug/unplug.
This sets it_allocated_size in the pnv_pci_ioda2_ops::create_table()
hook to what pnv_pci_ioda2_get_table_size() returns so from now on we
have a single place which calculates the maximum memory a table can
occupy. The original meaning of it_allocated_size is somewhat lost now
though.
We do not ditch it_allocated_size whatsoever here and we do not call
get_table_size() from vfio_iommu_spapr_tce.c when decrementing
locked_vm as we may have multiple IOMMU groups per container and even
though they all are supposed to have the same get_table_size()
implementation, there is a small chance for failure or confusion.
Fixes: 090bad39b2 ("powerpc/powernv: Add indirect levels to it_userspace")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently the opal log is globally readable. It is kernel policy to
limit the visibility of physical addresses / kernel pointers to root.
Given this and the fact the opal log may contain this information it
would be better to limit the readability to root.
Fixes: bfc36894a4 ("powerpc/powernv: Add OPAL message log interface")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Reviewed-by: Stewart Smith <stewart@linux.ibm.com>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The OPAL call wrapper gets interrupt disabling wrong. It disables
interrupts just by clearing MSR[EE], which has two problems:
- It doesn't call into the IRQ tracing subsystem, which means tracing
across OPAL calls does not always notice IRQs have been disabled.
- It doesn't go through the IRQ soft-mask code, which causes a minor
bug. MSR[EE] can not be restored by saving the MSR then clearing
MSR[EE], because a racing interrupt while soft-masked could clear
MSR[EE] between the two steps. This can cause MSR[EE] to be
incorrectly enabled when the OPAL call returns. Fortunately that
should only result in another masked interrupt being taken to
disable MSR[EE] again, but it's a bit sloppy.
The existing code also saves MSR to PACA, which is not re-entrant if
there is a nested OPAL call from different MSR contexts, which can
happen these days with SRESET interrupts on bare metal.
To fix these issues, move the tracing and IRQ handling code to C, and
call into asm just for the low level call when everything is ready to
go. Save the MSR on stack rather than PACA.
Performance cost is kept to a minimum with a few optimisations:
- The endian switch upon return is combined with the MSR restore,
which avoids an expensive context synchronizing operation for LE
kernels. This makes up for the additional mtmsrd to enable
interrupts with local_irq_enable().
- blr is now used to return from the opal_* functions that are called
as C functions, to avoid link stack corruption. This requires a
skiboot fix as well to keep the call stack balanced.
A NULL call is more costly after this, (410ns->430ns on POWER9), but
OPAL calls are generally not performance critical at this scale.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 24be85a23d ("powerpc/powernv: Clear PECE1 in LPCR via stop-api
only on Hotplug", 2017-07-21) added two calls to opal_slw_set_reg()
inside pnv_cpu_offline(), with the aim of changing the LPCR value in
the SLW image to disable wakeups from the decrementer while a CPU is
offline. However, pnv_cpu_offline() gets called each time a secondary
CPU thread is woken up to participate in running a KVM guest, that is,
not just when a CPU is offlined.
Since opal_slw_set_reg() is a very slow operation (with observed
execution times around 20 milliseconds), this means that an offline
secondary CPU can often be busy doing the opal_slw_set_reg() call
when the primary CPU wants to grab all the secondary threads so that
it can run a KVM guest. This leads to messages like "KVM: couldn't
grab CPU n" being printed and guest execution failing.
There is no need to reprogram the SLW image on every KVM guest entry
and exit. So that we do it only when a CPU is really transitioning
between online and offline, this moves the calls to
pnv_program_cpu_hotplug_lpcr() into pnv_smp_cpu_kill_self().
Fixes: 24be85a23d ("powerpc/powernv: Clear PECE1 in LPCR via stop-api only on Hotplug")
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The change_pte() notifier was designed to use as a quick path to
update secondary MMU PTEs on write permission changes or PFN changes.
For KVM, it could reduce the vm-exits when vcpu faults on the pages
that was touched up by KSM. It's not used to do cache invalidations,
for example, if we see the notifier will be called before the real PTE
update after all (please see set_pte_at_notify that set_pte_at was
called later).
All the necessary cache invalidation should all be done in
invalidate_range() already.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
Reviewed-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This adds an "in_guest" parameter to machine_check_print_event_info()
so that we can avoid trying to translate guest NIP values into
symbolic form using the host kernel's symbol table.
Reviewed-by: Aravinda Prasad <aravinda@linux.vnet.ibm.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The compound IOMMU group rework moved iommu_register_group() together
in pnv_pci_ioda_setup_iommu_api() (which is a part of
ppc_md.pcibios_fixup). As the result, pnv_ioda_setup_bus_iommu_group()
does not create groups any more, it only adds devices to groups.
This works fine for boot time devices. However IOMMU groups for
SRIOV's VFs were added by pnv_ioda_setup_bus_iommu_group() so this got
broken: pnv_tce_iommu_bus_notifier() expects a group to be registered
for VF and it is not.
This adds missing group registration and adds a NULL pointer check
into the bus notifier so we won't crash if there is no group, although
it is not expected to happen now because of the change above.
Example oops seen prior to this patch:
$ echo 1 > /sys/bus/pci/devices/0000\:01\:00.0/sriov_numvfs
Unable to handle kernel paging request for data at address 0x00000030
Faulting instruction address: 0xc0000000004a6018
Oops: Kernel access of bad area, sig: 11 [#1]
LE SMP NR_CPUS=2048 NUMA PowerNV
CPU: 46 PID: 7006 Comm: bash Not tainted 4.15-ish
NIP: c0000000004a6018 LR: c0000000004a6014 CTR: 0000000000000000
REGS: c000008fc876b400 TRAP: 0300 Not tainted (4.15-ish)
MSR: 900000000280b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE>
CFAR: c000000000d0be20 DAR: 0000000000000030 DSISR: 40000000 SOFTE: 1
...
NIP sysfs_do_create_link_sd.isra.0+0x68/0x150
LR sysfs_do_create_link_sd.isra.0+0x64/0x150
Call Trace:
pci_dev_type+0x0/0x30 (unreliable)
iommu_group_add_device+0x8c/0x600
iommu_add_device+0xe8/0x180
pnv_tce_iommu_bus_notifier+0xb0/0xf0
notifier_call_chain+0x9c/0x110
blocking_notifier_call_chain+0x64/0xa0
device_add+0x524/0x7d0
pci_device_add+0x248/0x450
pci_iov_add_virtfn+0x294/0x3e0
pci_enable_sriov+0x43c/0x580
mlx5_core_sriov_configure+0x15c/0x2f0 [mlx5_core]
sriov_numvfs_store+0x180/0x240
dev_attr_store+0x3c/0x60
sysfs_kf_write+0x64/0x90
kernfs_fop_write+0x1ac/0x240
__vfs_write+0x3c/0x70
vfs_write+0xd8/0x220
SyS_write+0x6c/0x110
system_call+0x58/0x6c
Fixes: 0bd971676e ("powerpc/powernv/npu: Add compound IOMMU groups")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reported-by: Santwana Samantray <santwana.samantray@in.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There is no good reason for this helper, just opencode it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Now that we've switched all the powerpc nommu and swiotlb methods to
use the generic dma_direct_* calls we can remove these ops vectors
entirely and rely on the common direct mapping bypass that avoids
indirect function calls entirely. This also allows to remove a whole
lot of boilerplate code related to setting up these operations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use the generic iommu bypass code instead of overriding set_dma_mask.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
These devices are not PCIe devices and do not have associated dma map
ops, so this is just dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This function is completely bogus - the fact that two PCIe devices come
from the same vendor has absolutely nothing to say about the DMA
capabilities and characteristics.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The IODA reset is used to flush out any OS controlled state from the PHB.
This reset can fail if a PHB fatal error has occurred in early boot,
probably due to a because of a bad device. We already do a fundemental
reset of the device in some cases, so this patch just adds a test to force
a full reset if firmware reports an error when performing the IODA reset.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Remove linux/printk.h which is included more than once.
Signed-off-by: Sabyasachi Gupta <sabyasachi.linux@gmail.com>
Acked-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
TCE_KILL_INVAL_ALL has moved long ago but the comment was forgotted so
finish the move and remove the comment.
Fixes: 0bbcdb437d "powerpc/powernv/npu: TCE Kill helpers cleanup"
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
With a recent change around IOMMU group, a system with an opencapi
adapter is no longer booting and we get a kernel oops:
BUG: Kernel NULL pointer dereference at 0x00000028
Faulting instruction address: 0xc0000000000aa38c
...
NIP pnv_try_setup_npu_table_group+0x1c/0x1a0
LR pnv_pci_ioda_fixup+0x1f8/0x660
Call Trace:
pnv_try_setup_npu_table_group+0x60/0x
pnv_pci_ioda_fixup+0x20c/0x660
pcibios_resource_survey+0x2c8/0x31c
pcibios_init+0xb0/0xe4
do_one_initcall+0x64/0x264
kernel_init_freeable+0x36c/0x468
kernel_init+0x2c/0x148
ret_from_kernel_thread+0x5c/0x68
An opencapi device is using a device PE, so the current code breaks
because pe->pbus is not defined.
More generally, there's no need to define an IOMMU group for opencapi,
as the device sends real addresses directly (admittedly, the
virtualization story is yet to be written). So let's fix it by
skipping the IOMMU group setup for opencapi PHBs.
Fixes: 0bd971676e ("powerpc/powernv/npu: Add compound IOMMU groups")
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There is a typo so we accidentally allocate enough memory for a pointer
when we wanted to allocate enough for a struct.
Fixes: 0bd971676e ("powerpc/powernv/npu: Add compound IOMMU groups")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently, CONFIG_JUMP_LABEL just means "I _want_ to use jump label".
The jump label is controlled by HAVE_JUMP_LABEL, which is defined
like this:
#if defined(CC_HAVE_ASM_GOTO) && defined(CONFIG_JUMP_LABEL)
# define HAVE_JUMP_LABEL
#endif
We can improve this by testing 'asm goto' support in Kconfig, then
make JUMP_LABEL depend on CC_HAS_ASM_GOTO.
Ugly #ifdef HAVE_JUMP_LABEL will go away, and CONFIG_JUMP_LABEL will
match to the real kernel capability.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument
of the user address range verification function since we got rid of the
old racy i386-only code to walk page tables by hand.
It existed because the original 80386 would not honor the write protect
bit when in kernel mode, so you had to do COW by hand before doing any
user access. But we haven't supported that in a long time, and these
days the 'type' argument is a purely historical artifact.
A discussion about extending 'user_access_begin()' to do the range
checking resulted this patch, because there is no way we're going to
move the old VERIFY_xyz interface to that model. And it's best done at
the end of the merge window when I've done most of my merges, so let's
just get this done once and for all.
This patch was mostly done with a sed-script, with manual fix-ups for
the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form.
There were a couple of notable cases:
- csky still had the old "verify_area()" name as an alias.
- the iter_iov code had magical hardcoded knowledge of the actual
values of VERIFY_{READ,WRITE} (not that they mattered, since nothing
really used it)
- microblaze used the type argument for a debug printout
but other than those oddities this should be a total no-op patch.
I tried to fix up all architectures, did fairly extensive grepping for
access_ok() uses, and the changes are trivial, but I may have missed
something. Any missed conversion should be trivially fixable, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Consolidation of bus (PCI, PCMCIA, EISA, RapidIO) config entries
by Christoph Hellwig.
Currently, every architecture that wants to provide common peripheral
busses needs to add some boilerplate code and include the right Kconfig
files. This series instead just selects the presence (when needed) and
then handles everything in the bus-specific Kconfig file under drivers/.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=WxId
-----END PGP SIGNATURE-----
Merge tag 'kconfig-v4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kconfig file consolidation from Masahiro Yamada:
"Consolidation of bus (PCI, PCMCIA, EISA, RapidIO) config entries by
Christoph Hellwig.
Currently, every architecture that wants to provide common peripheral
busses needs to add some boilerplate code and include the right
Kconfig files. This series instead just selects the presence (when
needed) and then handles everything in the bus-specific Kconfig file
under drivers/"
* tag 'kconfig-v4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
pcmcia: remove per-arch PCMCIA config entry
eisa: consolidate EISA Kconfig entry in drivers/eisa
rapidio: consolidate RAPIDIO config entry in drivers/rapidio
pcmcia: allow PCMCIA support independent of the architecture
PCI: consolidate the PCI_SYSCALL symbol
PCI: consolidate the PCI_DOMAINS and PCI_DOMAINS_GENERIC config options
PCI: consolidate PCI config entry in drivers/pci
MIPS: remove the HT_PCI config option
Convert string compares of DT node names to use of_node_name_eq helper
instead. This removes direct access to the node name pointer.
A couple of open coded iterating thru the child node names are converted
to use for_each_child_of_node() instead.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When a page fault happens in a GPU, the GPU signals the OS and the GPU
driver calls the fault handler which populated a page table; this allows
the GPU to complete an ATS request.
On the bare metal get_user_pages() is enough as it adds a pte to
the kernel page table but under KVM the partition scope tree does not get
updated so ATS will still fail.
This reads a byte from an effective address which causes HV storage
interrupt and KVM updates the partition scope tree.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
A broken device tree might contain more than 8 values and introduce hard
to debug memory corruption bug. This adds the boundary check.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In order to make ATS work and translate addresses for arbitrary
LPID and PID, we need to program an NPU with LPID and allow PID wildcard
matching with a specific MSR mask.
This implements a helper to assign a GPU to LPAR and program the NPU
with a wildcard for PID and a helper to do clean-up. The helper takes
MSR (only DR/HV/PR/SF bits are allowed) to program them into NPU2 for
ATS checkout requests support.
This exports pnv_npu2_unmap_lpar_dev() as following patches will use it
from the VFIO driver.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
At the moment the powernv platform registers an IOMMU group for each
PE. There is an exception though: an NVLink bridge which is attached
to the corresponding GPU's IOMMU group making it a master.
Now we have POWER9 systems with GPUs connected to each other directly
bypassing PCI. At the moment we do not control state of these links so
we have to put such interconnected GPUs to one IOMMU group which means
that the old scheme with one GPU as a master won't work - there will
be up to 3 GPUs in such group.
This introduces a npu_comp struct which represents a compound IOMMU
group made of multiple PEs - PCI PEs (for GPUs) and NPU PEs (for
NVLink bridges). This converts the existing NVLink1 code to use the
new scheme. >From now on, each PE must have a valid
iommu_table_group_ops which will either be called directly (for a
single PE group) or indirectly from a compound group handlers.
This moves IOMMU group registration for NVLink-connected GPUs to
npu-dma.c. For POWER8, this stores a new compound group pointer in the
PE (so a GPU is still a master); for POWER9 the new group pointer is
stored in an NPU (which is allocated per a PCI host controller).
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[mpe: Initialise npdev to NULL in pnv_try_setup_npu_table_group()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
At the moment NPU IOMMU is manipulated directly from the IODA2 PCI
PE code; PCI PE acts as a master to NPU PE. Soon we will have compound
IOMMU groups with several PEs from several different PHB (such as
interconnected GPUs and NPUs) so there will be no single master but
a one big IOMMU group.
This makes a first step and converts an NPU PE with a set of extern
function to a table group.
This should cause no behavioral change. Note that
pnv_npu_release_ownership() has never been implemented.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Normal PCI PEs have 2 TVEs, one per a DMA window; however NPU PE has only
one which points to one of two tables of the corresponding PCI PE.
So whenever a new DMA window is programmed to PEs, the NPU PE needs to
release old table in order to use the new one.
Commit d41ce7b1bc ("powerpc/powernv/npu: Do not try invalidating 32bit
table when 64bit table is enabled") did just that but in pci-ioda.c
while it actually belongs to npu-dma.c.
This moves the single TVE handling to npu-dma.c. This does not implement
restoring though as it is highly unlikely that we can set the table to
PCI PE and cannot to NPU PE and if that fails, we could only set 32bit
table to NPU PE and this configuration is not really supported or wanted.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The iommu_table pointer stored in iommu_table_group may get stale
by accident, this adds referencing and removes a redundant comment
about this.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Registering new IOMMU groups and adding devices to them are separated in
code and the latter is dug in the DMA setup code which it does not
really belong to.
This moved IOMMU groups setup to a separate helper which registers a group
and adds devices as before. This does not make a difference as IOMMU
groups are not used anyway; the only dependency here is that
iommu_add_device() requires a valid pointer to an iommu_table
(set by set_iommu_table_base()).
To keep the old behaviour, this does not add new IOMMU groups for PEs
with no DMA weight and also skips NVLink bridges which do not have
pci_controller_ops::setup_bridge (the normal way of adding PEs).
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The powernv platform registers IOMMU groups and adds devices to them
from the pci_controller_ops::setup_bridge() hook except one case when
virtual functions (SRIOV VFs) are added from a bus notifier.
The pseries platform registers IOMMU groups from
the pci_controller_ops::dma_bus_setup() hook and adds devices from
the pci_controller_ops::dma_dev_setup() hook. The very same bus notifier
used for powernv does not add devices for pseries though as
__of_scan_bus() adds devices first, then it does the bus/dev DMA setup.
Both platforms use iommu_add_device() which takes a device and expects
it to have a valid IOMMU table struct with an iommu_table_group pointer
which in turn points the iommu_group struct (which represents
an IOMMU group). Although the helper seems easy to use, it relies on
some pre-existing device configuration and associated data structures
which it does not really need.
This simplifies iommu_add_device() to take the table_group pointer
directly. Pseries already has a table_group pointer handy and the bus
notified is not used anyway. For powernv, this copies the existing bus
notifier, makes it work for powernv only which means an easy way of
getting to the table_group pointer. This was tested on VFs but should
also support physical PCI hotplug.
Since iommu_add_device() receives the table_group pointer directly,
pseries does not do TCE cache invalidation (the hypervisor does) nor
allow multiple groups per a VFIO container (in other words sharing
an IOMMU table between partitionable endpoints), this removes
iommu_table_group_link from pseries.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When introduced, the NPU context init/destroy helpers called OPAL which
enabled/disabled PID (a userspace memory context ID) filtering in an NPU
per a GPU; this was a requirement for P9 DD1.0. However newer chip
revision added a PID wildcard support so there is no more need to
call OPAL every time a new context is initialized. Also, since the PID
wildcard support was added, skiboot does not clear wildcard entries
in the NPU so these remain in the hardware till the system reboot.
This moves LPID and wildcard programming to the PE setup code which
executes once during the booting process so NPU2 context init/destroy
won't need to do additional configuration.
This replaces the check for FW_FEATURE_OPAL with a check for npu!=NULL as
this is the way to tell if the NPU support is present and configured.
This moves pnv_npu2_init() declaration as pseries should be able to use it.
This keeps pnv_npu2_map_lpar() in powernv as pseries is not allowed to
call that. This exports pnv_npu2_map_lpar_dev() as following patches
will use it from the VFIO driver.
While at it, replace redundant list_for_each_entry_safe() with
a simpler list_for_each_entry().
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The powernv PCI code stores NPU data in the pnv_phb struct. The latter
is referenced by pci_controller::private_data. We are going to have NPU2
support in the pseries platform as well but it does not store any
private_data in in the pci_controller struct; and even if it did,
it would be a different data structure.
This makes npu a pointer and stores it one level higher in
the pci_controller struct.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The skiboot firmware has a hot reset handler which fences the NVIDIA V100
GPU RAM on Witherspoons and makes accesses no-op instead of throwing HMIs:
https://github.com/open-power/skiboot/commit/fca2b2b839a67
Now we are going to pass V100 via VFIO which most certainly involves
KVM guests which are often terminated without getting a chance to offline
GPU RAM so we end up with a running machine with misconfigured memory.
Accessing this memory produces hardware management interrupts (HMI)
which bring the host down.
To suppress HMIs, this wires up this hot reset hook to vfio_pci_disable()
via pci_disable_device() which switches NPU2 to a safe mode and prevents
HMIs.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Alistair Popple <alistair@popple.id.au>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
opal_power_control_init() depends on opal message notifier to be
initialized, which is done in opal_init()->opal_message_init(). But both
these initialization are called through machine initcalls and it all
depends on in which order they being called. So far these are called in
correct order (may be we got lucky) and never saw any issue. But it is
clearer to control initialization order explicitly by moving
opal_power_control_init() into opal_init().
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
CONFIG_PCI_MSI was made mandatory by commit a311e738b6
("powerpc/powernv: Make PCI non-optional") so the #ifdef
checks around CONFIG_PCI_MSI here can be removed entirely.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The current implementation of the OPAL_PCI_EEH_FREEZE_STATUS call in
skiboot's NPU driver does not touch the pci_error_type parameter so
it might have garbage but the powernv code analyzes it nevertheless.
This initializes pcierr and fstate to zero in all call sites.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
fixup_phb() is never used, this removes it.
pick_m64_pe() and reserve_m64_pe() are always defined for all powernv
PHBs: they are initialized by pnv_ioda_parse_m64_window() which is
called unconditionally from pnv_pci_init_ioda_phb() which initializes
all known PHB types on powernv so we can open code them.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
At the moment PNV_IODA_PE_DEV is only used for NPU PEs which are not
present on IODA1 machines (i.e. POWER7) so let's remove a piece of
dead code.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The macro and few headers are not used so remove them.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The powernv platform maintains 2 TCE tables for VFIO - a hardware TCE
table and a table with userspace addresses; the latter is used for
marking pages dirty when corresponging TCEs are unmapped from
the hardware table.
a68bd1267b ("powerpc/powernv/ioda: Allocate indirect TCE levels
on demand") enabled on-demand allocation of the hardware table,
however it missed the other table so it has still been fully allocated
at the boot time. This fixes the issue by allocating a single level,
just like we do for the hardware table.
Fixes: a68bd1267b ("powerpc/powernv/ioda: Allocate indirect TCE levels on demand")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There is no good reason to duplicate the PCI menu in every architecture.
Instead provide a selectable HAVE_PCI symbol that indicates availability
of PCI support, and a FORCE_PCI symbol to for PCI on and the handle the
rest in drivers/pci.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The NPU IOMMU is setup to mirror the parent PCIe device IOMMU
setup. Therefore it does not make sense to call dma operations such as
dma_map_page(), etc. directly on these devices. The existing dma_ops
simply print a warning if they are ever called, however this is
unnecessary and the warnings are likely to go unnoticed.
It is instead simpler to remove these operations and let the generic
DMA code print warnings (eg. via a NULL pointer deref) in cases of
buggy drivers attempting dma operations on NVLink devices.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Let's perform all checking + offlining + removing under
device_hotplug_lock, so nobody can mess with these devices via sysfs
concurrently.
[david@redhat.com: take device_hotplug_lock outside of loop]
Link: http://lkml.kernel.org/r/20180927092554.13567-6-david@redhat.com
Link: http://lkml.kernel.org/r/20180925091457.28651-6-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com>
Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Rashmica Gupta <rashmica.g@gmail.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: John Allen <jallen@linux.vnet.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: YASUAKI ISHIMATSU <yasu.isimatu@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
device_online() should be called with device_hotplug_lock() held.
Link: http://lkml.kernel.org/r/20180925091457.28651-5-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com>
Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Rashmica Gupta <rashmica.g@gmail.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: John Allen <jallen@linux.vnet.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: YASUAKI ISHIMATSU <yasu.isimatu@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm: online/offline_pages called w.o. mem_hotplug_lock", v3.
Reading through the code and studying how mem_hotplug_lock is to be used,
I noticed that there are two places where we can end up calling
device_online()/device_offline() - online_pages()/offline_pages() without
the mem_hotplug_lock. And there are other places where we call
device_online()/device_offline() without the device_hotplug_lock.
While e.g.
echo "online" > /sys/devices/system/memory/memory9/state
is fine, e.g.
echo 1 > /sys/devices/system/memory/memory9/online
Will not take the mem_hotplug_lock. However the device_lock() and
device_hotplug_lock.
E.g. via memory_probe_store(), we can end up calling
add_memory()->online_pages() without the device_hotplug_lock. So we can
have concurrent callers in online_pages(). We e.g. touch in
online_pages() basically unprotected zone->present_pages then.
Looks like there is a longer history to that (see Patch #2 for details),
and fixing it to work the way it was intended is not really possible. We
would e.g. have to take the mem_hotplug_lock in device/base/core.c, which
sounds wrong.
Summary: We had a lock inversion on mem_hotplug_lock and device_lock().
More details can be found in patch 3 and patch 6.
I propose the general rules (documentation added in patch 6):
1. add_memory/add_memory_resource() must only be called with
device_hotplug_lock.
2. remove_memory() must only be called with device_hotplug_lock. This is
already documented and holds for all callers.
3. device_online()/device_offline() must only be called with
device_hotplug_lock. This is already documented and true for now in core
code. Other callers (related to memory hotplug) have to be fixed up.
4. mem_hotplug_lock is taken inside of add_memory/remove_memory/
online_pages/offline_pages.
To me, this looks way cleaner than what we have right now (and easier to
verify). And looking at the documentation of remove_memory, using
lock_device_hotplug also for add_memory() feels natural.
This patch (of 6):
remove_memory() is exported right now but requires the
device_hotplug_lock, which is not exported. So let's provide a variant
that takes the lock and only export that one.
The lock is already held in
arch/powerpc/platforms/pseries/hotplug-memory.c
drivers/acpi/acpi_memhotplug.c
arch/powerpc/platforms/powernv/memtrace.c
Apart from that, there are not other users in the tree.
Link: http://lkml.kernel.org/r/20180925091457.28651-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: Rashmica Gupta <rashmica.g@gmail.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Cc: John Allen <jallen@linux.vnet.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: YASUAKI ISHIMATSU <yasu.isimatu@gmail.com>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When a memblock allocation APIs are called with align = 0, the alignment
is implicitly set to SMP_CACHE_BYTES.
Implicit alignment is done deep in the memblock allocator and it can
come as a surprise. Not that such an alignment would be wrong even
when used incorrectly but it is better to be explicit for the sake of
clarity and the prinicple of the least surprise.
Replace all such uses of memblock APIs with the 'align' parameter
explicitly set to SMP_CACHE_BYTES and stop implicit alignment assignment
in the memblock internal allocation functions.
For the case when memblock APIs are used via helper functions, e.g. like
iommu_arena_new_node() in Alpha, the helper functions were detected with
Coccinelle's help and then manually examined and updated where
appropriate.
The direct memblock APIs users were updated using the semantic patch below:
@@
expression size, min_addr, max_addr, nid;
@@
(
|
- memblock_alloc_try_nid_raw(size, 0, min_addr, max_addr, nid)
+ memblock_alloc_try_nid_raw(size, SMP_CACHE_BYTES, min_addr, max_addr,
nid)
|
- memblock_alloc_try_nid_nopanic(size, 0, min_addr, max_addr, nid)
+ memblock_alloc_try_nid_nopanic(size, SMP_CACHE_BYTES, min_addr, max_addr,
nid)
|
- memblock_alloc_try_nid(size, 0, min_addr, max_addr, nid)
+ memblock_alloc_try_nid(size, SMP_CACHE_BYTES, min_addr, max_addr, nid)
|
- memblock_alloc(size, 0)
+ memblock_alloc(size, SMP_CACHE_BYTES)
|
- memblock_alloc_raw(size, 0)
+ memblock_alloc_raw(size, SMP_CACHE_BYTES)
|
- memblock_alloc_from(size, 0, min_addr)
+ memblock_alloc_from(size, SMP_CACHE_BYTES, min_addr)
|
- memblock_alloc_nopanic(size, 0)
+ memblock_alloc_nopanic(size, SMP_CACHE_BYTES)
|
- memblock_alloc_low(size, 0)
+ memblock_alloc_low(size, SMP_CACHE_BYTES)
|
- memblock_alloc_low_nopanic(size, 0)
+ memblock_alloc_low_nopanic(size, SMP_CACHE_BYTES)
|
- memblock_alloc_from_nopanic(size, 0, min_addr)
+ memblock_alloc_from_nopanic(size, SMP_CACHE_BYTES, min_addr)
|
- memblock_alloc_node(size, 0, nid)
+ memblock_alloc_node(size, SMP_CACHE_BYTES, nid)
)
[mhocko@suse.com: changelog update]
[akpm@linux-foundation.org: coding-style fixes]
[rppt@linux.ibm.com: fix missed uses of implicit alignment]
Link: http://lkml.kernel.org/r/20181016133656.GA10925@rapoport-lnx
Link: http://lkml.kernel.org/r/1538687224-17535-1-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Acked-by: Paul Burton <paul.burton@mips.com> [MIPS]
Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
