For correctness and compliance with the XTS-AES specification, we are
adding support for ciphertext stealing to XTS implementations, even
though no use cases are known that will be enabled by this.
Since the Power8 implementation already has a fallback skcipher standby
for other purposes, let's use it for this purpose as well. If ciphertext
stealing use cases ever become a bottleneck, we can always revisit this.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For correctness and compliance with the XTS-AES specification, we are
adding support for ciphertext stealing to XTS implementations, even
though no use cases are known that will be enabled by this.
Since the s390 implementation already has a fallback skcipher standby
for other purposes, let's use it for this purpose as well. If ciphertext
stealing use cases ever become a bottleneck, we can always revisit this.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Align the x86 code with the generic XTS template, which now supports
ciphertext stealing as described by the IEEE XTS-AES spec P1619.
Tested-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some legacy code in the CIFS driver uses single DES to calculate
some password hash, and uses the crypto cipher API to do so. Given
that there is no point in invoking an accelerated cipher for doing
56-bit symmetric encryption on a single 8-byte block of input, the
flexibility of the crypto cipher API does not add much value here,
and so we're much better off using a library call into the generic
C implementation.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Another one for the cipher museum: split off DES core processing into
a separate module so other drivers (mostly for crypto accelerators)
can reuse the code without pulling in the generic DES cipher itself.
This will also permit the cipher interface to be made private to the
crypto API itself once we move the only user in the kernel (CIFS) to
this library interface.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the old DES3 verification functions that are no longer used.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In preparation of moving the shared key expansion routine into the
DES library, move the verification done by __des3_ede_setkey() into
its callers.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Switch to the refactored DES key verification routines. While at it,
rename the DES encrypt/decrypt routines so they will not conflict with
the DES library later on.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Switch to the refactored DES key verification routines. While at it,
rename the DES encrypt/decrypt routines so they will not conflict with
the DES library later on.
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The recently added helper routine to perform key strength validation
of triple DES keys is slightly inadequate, since it comes in two versions,
neither of which are highly useful for anything other than skciphers (and
many drivers still use the older blkcipher interfaces).
So let's add a new helper and, considering that this is a helper function
that is only intended to be used by crypto code itself, put it in a new
des.h header under crypto/internal.
While at it, implement a similar helper for single DES, so that we can
start replacing the pattern of calling des_ekey() into a temp buffer
that occurs in many drivers in drivers/crypto.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Clang errors out when building this macro:
lib/mpi/generic_mpih-mul1.c:37:24: error: invalid use of a cast in a
inline asm context requiring an l-value: remove the cast or build with
-fheinous-gnu-extensions
umul_ppmm(prod_high, prod_low, s1_ptr[j], s2_limb);
~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
lib/mpi/longlong.h:652:20: note: expanded from macro 'umul_ppmm'
: "=l" ((USItype)(w0)), \
~~~~~~~~~~^~~
lib/mpi/generic_mpih-mul1.c:37:3: error: invalid output constraint '=h'
in asm
umul_ppmm(prod_high, prod_low, s1_ptr[j], s2_limb);
^
lib/mpi/longlong.h:653:7: note: expanded from macro 'umul_ppmm'
"=h" ((USItype)(w1)) \
^
2 errors generated.
The C version that is used for GCC 4.4 and up works well with clang;
however, it is not currently being used because Clang masks itself
as GCC 4.2.1 for compatibility reasons. As Nick points out, we require
GCC 4.6 and newer in the kernel so we can eliminate all of the
versioning checks and just use the C version of umul_ppmm for all
supported compilers.
Link: https://github.com/ClangBuiltLinux/linux/issues/605
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The kthread calling this function is freezable after commit 03a3bb7ae6
("hwrng: core - Freeze khwrng thread during suspend") is applied.
Unfortunately, this function uses wait_event_interruptible() but doesn't
check for the kthread being woken up by the fake freezer signal. When a
user suspends the system, this kthread will wake up and if it fails the
entropy size check it will immediately go back to sleep and not go into
the freezer. Eventually, suspend will fail because the task never froze
and a warning message like this may appear:
PM: suspend entry (deep)
Filesystems sync: 0.000 seconds
Freezing user space processes ... (elapsed 0.001 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ...
Freezing of tasks failed after 20.003 seconds (1 tasks refusing to freeze, wq_busy=0):
hwrng R running task 0 289 2 0x00000020
[<c08c64c4>] (__schedule) from [<c08c6a10>] (schedule+0x3c/0xc0)
[<c08c6a10>] (schedule) from [<c05dbd8c>] (add_hwgenerator_randomness+0xb0/0x100)
[<c05dbd8c>] (add_hwgenerator_randomness) from [<bf1803c8>] (hwrng_fillfn+0xc0/0x14c [rng_core])
[<bf1803c8>] (hwrng_fillfn [rng_core]) from [<c015abec>] (kthread+0x134/0x148)
[<c015abec>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
Check for a freezer signal here and skip adding any randomness if the
task wakes up because it was frozen. This should make the kthread freeze
properly and suspend work again.
Fixes: 03a3bb7ae6 ("hwrng: core - Freeze khwrng thread during suspend")
Reported-by: Keerthy <j-keerthy@ti.com>
Tested-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Provide a version of the core AES transform to the aegis128 SIMD
code that does not rely on the special AES instructions, but uses
plain NEON instructions instead. This allows the SIMD version of
the aegis128 driver to be used on arm64 systems that do not
implement those instructions (which are not mandatory in the
architecture), such as the Raspberry Pi 3.
Since GCC makes a mess of this when using the tbl/tbx intrinsics
to perform the sbox substitution, preload the Sbox into v16..v31
in this case and use inline asm to emit the tbl/tbx instructions.
Clang does not support this approach, nor does it require it, since
it does a much better job at code generation, so there we use the
intrinsics as usual.
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Provide an accelerated implementation of aegis128 by wiring up the
SIMD hooks in the generic driver to an implementation based on NEON
intrinsics, which can be compiled to both ARM and arm64 code.
This results in a performance of 2.2 cycles per byte on Cortex-A53,
which is a performance increase of ~11x compared to the generic
code.
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add some plumbing to allow the AEGIS128 code to be built with SIMD
routines for acceleration.
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for the missing ciphertext stealing part of the XTS-AES
specification, which permits inputs of any size >= the block size.
Cc: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Cc: Ondrej Mosnacek <omosnace@redhat.com>
Tested-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Return -EINVAL on an attempt to set the authsize to 0 with an auth.
algorithm with a non-zero digestsize (i.e. anything but digest_null)
as authenticating the data and then throwing away the result does not
make any sense at all.
The digestsize zero exception is for use with digest_null for testing
purposes only.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto/streebog_generic.c:162:17: warning:
Pi defined but not used [-Wunused-const-variable=]
crypto/streebog_generic.c:151:17: warning:
Tau defined but not used [-Wunused-const-variable=]
They are never used, so can be removed.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Vitaly Chikunov <vt@altlinux.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto/aes_generic.c:64:18: warning:
rco_tab defined but not used [-Wunused-const-variable=]
It is never used, so can be removed.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This fixes the following Sphinx warning:
Documentation/crypto/crypto_engine.rst:2:
WARNING: Explicit markup ends without a blank line; unexpected unindent.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reference counters are preferred to use refcount_t instead of
atomic_t.
This is because the implementation of refcount_t can prevent
overflows and detect possible use-after-free.
So convert atomic_t ref counters to refcount_t.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The hwrng_fill() function can run while devices are suspending and
resuming. If the hwrng is behind a bus such as i2c or SPI and that bus
is suspended, the hwrng may hang the bus while attempting to add some
randomness. It's been observed on ChromeOS devices with suspend-to-idle
(s2idle) and an i2c based hwrng that this kthread may run and ask the
hwrng device for randomness before the i2c bus has been resumed.
Let's make this kthread freezable so that we don't try to touch the
hwrng during suspend/resume. This ensures that we can't cause the hwrng
backing driver to get into a bad state because the device is guaranteed
to be resumed before the hwrng kthread is thawed.
Cc: Andrey Pronin <apronin@chromium.org>
Cc: Duncan Laurie <dlaurie@chromium.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Alexander Steffen <Alexander.Steffen@infineon.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In the process of turning caam/qi into a library, the check of
MCFGR[QI] bit has been inadvertently dropped.
Fix the condition for DPAA 1.x QI detection, which should be:
MCFGR[QI] && !MCFGR[DPAA2]
A check in the library exit point is currently not needed,
since the list of registered algorithms is empty.
While here, silence the library initialization abort - since jr.c
calls it unconditionally.
Fixes: 1b46c90c8e ("crypto: caam - convert top level drivers to libraries")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
