Add xgmi pstate setting on powerplay routine.
V2: split the change of is_support_sw_smu_xgmi into a separate patch
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix sparse warnings:
drivers/gpu/drm/amd/amdgpu/../powerplay/arcturus_ppt.c:2050:5:
warning: symbol 'arcturus_i2c_eeprom_control_init' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../powerplay/arcturus_ppt.c:2068:6:
warning: symbol 'arcturus_i2c_eeprom_control_fini' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The vega10_odn_update_soc_table() function does not allow the SCLK
dependent voltage to be set for power-state 7 to a value below the default
in pptable. Change the for-loop condition to allow undervolting in the
highest state.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205277
Signed-off-by: Pelle van Gils <pelle@vangils.xyz>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For Arcturus, clock limit settings on uclk/socclk/fclk domains
are not supported.
V2: simplify the code to support both SGPU and MGPU cases
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With this cleanup, the APIs from amdgpu_smu.c will map to
ASIC specific ones directly. Those can be shared around
all SMU V11/V12 ASICs will be put in smu_v11_0.c and
smu_v12_0.c respectively.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Those swSMU APIs used internally are moved to smu_internal.h while
others are kept in amdgpu_smu.h.
V2: give a better name smu_internal.h for the place to hold
those internal APIs
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is a quick and low risk fix. Those APIs which
are exposed to other IPs or to support sysfs/hwmon
interfaces or DAL will have lock protection. Meanwhile
no lock protection is enforced for swSMU internal used
APIs. Future optimization is needed.
V2: strip the lock protection for all swSMU internal APIs
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Feifei Xu <Feifei.Xu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To avoid walking past the end of the arrays since the PP_SMU
defines don't match the renoir defines.
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Smatch complains that we need to initialized "*cap" otherwise it can
lead to an uninitialized variable bug in the caller. This seems like a
reasonable warning and it doesn't hurt to silence it at least.
drivers/gpu/drm/amd/amdgpu/vi.c:767 vi_asic_reset_method() error: uninitialized symbol 'baco_reset'.
Fixes: 425db2553e ("drm/amdgpu: expose BACO interfaces to upper level from PP")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
smu_send_smc_msg(smu, SMU_MSG_AllowGfxOff) Just turn on a switch.
As to when GPU get into "GFXoff" will be up to drawing load.
So we can not sure which state GPU should be in after enable gfxoff
feature.
Signed-off-by: chen gong <curry.gong@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In some cases, display fixes memory clock frequency to a high value
rather than the natural memory clock switching.
When we comes back from s3 resume, the request from display is not reset,
this causes the bug which makes the memory clock goes into a low value.
Then due to the insuffcient memory clock, the screen flicks.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix gfx cgpg setting sequence for RLC deadlock at safe mode entry in polling gfx response.
The patch can fix VCN IB test failed and DAL get dispaly count failed issue.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It was a vega20 specific hack. Check if we are in reset
and what reset method we are using.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
there are two paths for renoir dc access smu.
one dc access smu directly using bios smc
interface: set disply, dprefclk, etc.
another goes through pplib for get dpm clock
table and set watermmark.
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bug fix for pcie paramerers override on swsmu.
Below is a scenario to have this problem.
pptable definition on pcie dpm:
0 -> pcie gen speed:1, pcie lanes: *16
1 -> pcie gen speed:4, pcie lanes: *16
Then if we have a system only have the capbility:
pcie gen speed: 3, pcie lanes: *8,
we will override dpm 1 to pcie gen speed 3, pcie lanes *8.
But the code skips the dpm 0 configuration.
So the real pcie dpm parameters are:
0 -> pcie gen speed:1, pcie lanes: *16
1 -> pcie gen speed:3, pcie lanes: *8
Then the wrong pcie lanes will be toggled.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Program THM_BACO_CNTL.SOC_DOMAIN_IDLE=1 will tell VBIOS to disable ECC when
BACO exit. This can save BACO exit time by PSP on none-ECC SKU. Drop the setting
for ECC supported SKU.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Polaris and vegam use count for the value rather than
level. This looks like a copy paste typo from when
the code was adapted from previous asics.
I'm not sure that the SMU actually uses this value, so
I don't know that it actually is a bug per se.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=108609
Reported-by: Robert Strube <rstrube@gmail.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The error handling is off by one. We should not free the first
"tables[i].bo" without decrementing "i" because that might result in a
double free. The second problem is that when an error occurs, then the
zeroth element "tables[0].bo" isn't freed.
I had make "i" signed int for the error handling to work, so I just
updated "ret" as well as a clean up.
Fixes: f96357a991 ("drm/amd/powerplay: implement smu_init(fini)_fb_allocations function")
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This function needs to drop the mutex before returning.
Fixes: f7e3a5776f ("drm/amd/powerplay: check SMU engine readiness before proceeding on S3 resume")
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Even though 'smu8_smu' is declared, it is not used after below statement.
smu8_smu = hwmgr->smu_backend;
So 'unused variable' could be safely removed
to stop warning message as below:
drivers/gpu/drm/amd/amdgpu/../powerplay/smumgr/smu8_smumgr.c:180:22:
warning: variable ‘smu8_smu’ set but not used
[-Wunused-but-set-variable]
struct smu8_smumgr *smu8_smu;
^
Signed-off-by: Austin Kim <austindh.kim@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the member of is_apu in smu_context need to initlialize by default.
set default value is false (dGPU)
for patch:
drm/amd/powerplay: bypass dpm_context null pointer check guard
for some smu series
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
