HFI's are hard-wired to send Device Info frames with
MgmtAllowed bit set to 0. This means in B2B setups,
MgmtAllowed would never be allowed, which prevents
remote opa management tools from working properly.
Assume MgmtAllowed if a neighbor is also an HFI.
Fixes: 98b9ee2002 ("IB/hfi1: Cache neighbor secure data after link up")
Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The Sharp SL Series (Zaurus) PXA handhelds have 16/64/128M of NAND flash
and share the same layout of the first 7M partition, managed by Sharp FTL.
GPL 2.4 sources: http://support.ezaurus.com/developer/source/source_dl.asp
The purpose of this self-contained patch is to add a common parser and
remove the hardcoded sizes in the board files (these devices are not yet
converted to devicetree).
Users will have benefits because the mtdparts= tag will not be necessary
anymore and they will be free to repartition the little sized flash.
The obsolete bootloader can not pass the partitioning info to modern
kernels anymore so it has to be read from flash at known logical addresses.
(see http://www.h5.dion.ne.jp/~rimemoon/zaurus/memo_006.htm )
In kernel, under arch/arm/mach-pxa we have already 8 machines:
MACH_POODLE, MACH_CORGI, MACH_SHEPERD, MACH_HUSKY, MACH_AKITA, MACH_SPITZ,
MACH_BORZOI, MACH_TOSA.
Lost after the 2.4 vendor kernel are MACH_BOXER and MACH_TERRIER.
Almost every model has different factory partitioning: add to this the
units can be repartitioned by users with userspace tools (nandlogical)
and installers for popular (back then) linux distributions.
The Parameter Area in the first (boot) partition extends from 0x00040000 to
0x0007bfff (176k) and contains two copies of the partition table:
...
0x00060000: Partition Info1 16k
0x00064000: Partition Info2 16k
0x00668000: Model 16k
...
The first 7M partition is managed by the Sharp FTL reserving 5% + 1 blocks
for wear-leveling: some blocks are remapped and one layer of translation
(logical to physical) is necessary.
There isn't much documentation about this FTL in the 2.4 sources, just the
MTD methods for reading and writing using logical addresses and the block
management (wear-leveling, use counter).
It seems this FTL was tailored with 16KiB eraesize in mind so to fit one
param block exactly, to have two copies of the partition table on two
blocks.
Later pxa27x devices have same size but 128KiB erasesize and less blocks
(56 vs. 448) but the same schema was adopted, even if the two tables are
now in the same eraseblock.
For the purpose of the MTD parser only the read part of the code was taken.
The NAND drivers that can use this parser are sharpsl.c and tmio_nand.c.
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Unlike what's done in mtd_read/write(), there are no checks to make sure
the parameters passed to mtd_read/write_oob() are consistent, which
forces implementers of ->_read/write_oob() to do it, which in turn leads
to code duplication and possibly errors in the logic.
Do general sanity checks, like ops fields consistency and range checking.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Peter Pan <peterpandong@micron.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
It is now unused.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Reviewed-by: Richard Weinberger <richard@nod.at>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Tested-by: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
The mtd->_point method is a superset of mtd->_get_unmapped_area.
Especially in the NOR flash case, the point method ensures the flash
memory is in array (data) mode and that it will stay that way which
is precisely what callers of mtd_get_unmapped_area() would expect.
Implement mtd_get_unmapped_area() in terms of mtd->_point now that all
drivers that provided a _get_unmapped_area method also have the _point
method implemented.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Reviewed-by: Richard Weinberger <richard@nod.at>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
This will allow for the removal of the get_unmapped_area method later.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Tested-by: Chris Brandt <chris.brandt@renesas.com>
[rw: fixed build]
Signed-off-by: Richard Weinberger <richard@nod.at>
This will allow for the removal of the get_unmapped_area method later.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Reviewed-by: Richard Weinberger <richard@nod.at>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
When the phys pointer is non null, the point method is expected to return
the physical address for the pointed area. In the case of the mtdram
driver we have to retrieve the physical address for the corresponding
vmalloc area. However, there is no guarantee that the vmalloc area is
made of physically contiguous pages. In that case we simply limit retlen
to the actually contiguous pages.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Reviewed-by: Richard Weinberger <richard@nod.at>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Convert slram to use memremap() to map the memory it uses to back an MTD
device, as this is the proper interface for mapping memory. This change
enables normal memory to be used to back an MTD device on arm64, as arm64
prevents ioremap() being used on normal memory.
Signed-off-by: Roy Franz <roy.franz@cavium.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: David Daney <david.daney@cavium.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
The GENERIC_IO option is set for every architecture except tile and score
as those define NO_IOMEM. The option only controls visibility of
CONFIG_MTD which doesn't appear to be necessary for any reason, so let's
just remove GENERIC_IO.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>
Cc: user-mode-linux-devel@lists.sourceforge.net
Cc: user-mode-linux-user@lists.sourceforge.net
Cc: linux-mtd@lists.infradead.org
Acked-by: Richard Weinberger <richard@nod.at>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Pull core locking updates from Ingo Molnar:
"The main changes in this cycle are:
- Another attempt at enabling cross-release lockdep dependency
tracking (automatically part of CONFIG_PROVE_LOCKING=y), this time
with better performance and fewer false positives. (Byungchul Park)
- Introduce lockdep_assert_irqs_enabled()/disabled() and convert
open-coded equivalents to lockdep variants. (Frederic Weisbecker)
- Add down_read_killable() and use it in the VFS's iterate_dir()
method. (Kirill Tkhai)
- Convert remaining uses of ACCESS_ONCE() to
READ_ONCE()/WRITE_ONCE(). Most of the conversion was Coccinelle
driven. (Mark Rutland, Paul E. McKenney)
- Get rid of lockless_dereference(), by strengthening Alpha atomics,
strengthening READ_ONCE() with smp_read_barrier_depends() and thus
being able to convert users of lockless_dereference() to
READ_ONCE(). (Will Deacon)
- Various micro-optimizations:
- better PV qspinlocks (Waiman Long),
- better x86 barriers (Michael S. Tsirkin)
- better x86 refcounts (Kees Cook)
- ... plus other fixes and enhancements. (Borislav Petkov, Juergen
Gross, Miguel Bernal Marin)"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits)
locking/x86: Use LOCK ADD for smp_mb() instead of MFENCE
rcu: Use lockdep to assert IRQs are disabled/enabled
netpoll: Use lockdep to assert IRQs are disabled/enabled
timers/posix-cpu-timers: Use lockdep to assert IRQs are disabled/enabled
sched/clock, sched/cputime: Use lockdep to assert IRQs are disabled/enabled
irq_work: Use lockdep to assert IRQs are disabled/enabled
irq/timings: Use lockdep to assert IRQs are disabled/enabled
perf/core: Use lockdep to assert IRQs are disabled/enabled
x86: Use lockdep to assert IRQs are disabled/enabled
smp/core: Use lockdep to assert IRQs are disabled/enabled
timers/hrtimer: Use lockdep to assert IRQs are disabled/enabled
timers/nohz: Use lockdep to assert IRQs are disabled/enabled
workqueue: Use lockdep to assert IRQs are disabled/enabled
irq/softirqs: Use lockdep to assert IRQs are disabled/enabled
locking/lockdep: Add IRQs disabled/enabled assertion APIs: lockdep_assert_irqs_enabled()/disabled()
locking/pvqspinlock: Implement hybrid PV queued/unfair locks
locking/rwlocks: Fix comments
x86/paravirt: Set up the virt_spin_lock_key after static keys get initialized
block, locking/lockdep: Assign a lock_class per gendisk used for wait_for_completion()
workqueue: Remove now redundant lock acquisitions wrt. workqueue flushes
...
The use_srq configfs attribute is created after it is read. Hence
modify srpt_tpg_attrib_use_srq_store() such that this function
switches dynamically between non-SRQ and SRQ mode.
Reported-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Introduce the helper function srpt_set_enabled(). Protect
sport->enabled changes with sdev->mutex. Makes configfs writes
into 'enabled' wait until all channel resources have been freed.
Wait until channel release has finished during kernel module
unload.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Except for changing a BUG_ON() call into a WARN_ON_ONCE() call, this
patch does not change any functionality.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The only functional change in this patch is in the srpt_add_one()
error path: if allocating the ring buffer for the SRQ fails, fall
back to non-SRQ mode instead of disabling SRP target functionality.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
IB and iWARP specs both spell out that posting a receive work request
to a queue pair in the RESET state is an invalid operation and required
to fail. Postpone posting receive work requests until after the
transition to the INIT state.
Fixes: commit dea262094c ("IB/srpt: Change default behavior from using SRQ to using RC")
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Pull RCU updates from Ingo Molnar:
"The main changes in this cycle are:
- Documentation updates
- RCU CPU stall-warning updates
- Torture-test updates
- Miscellaneous fixes
Size wise the biggest updates are to documentation. Excluding
documentation most of the code increase comes from a single commit
which expands debugging"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
srcu: Add parameters to SRCU docbook comments
doc: Rewrite confusing statement about memory barriers
memory-barriers.txt: Fix typo in pairing example
rcu/segcblist: Include rcupdate.h
rcu: Add extended-quiescent-state testing advice
rcu: Suppress lockdep false-positive ->boost_mtx complaints
rcu: Do not include rtmutex_common.h unconditionally
torture: Provide TMPDIR environment variable to specify tmpdir
rcutorture: Dump writer stack if stalled
rcutorture: Add interrupt-disable capability to stall-warning tests
rcu: Suppress RCU CPU stall warnings while dumping trace
rcu: Turn off tracing before dumping trace
rcu: Make RCU CPU stall warnings check for irq-disabled CPUs
sched,rcu: Make cond_resched() provide RCU quiescent state
sched: Make resched_cpu() unconditional
irq_work: Map irq_work_on_queue() to irq_work_on() in !SMP
rcu: Create call_rcu_tasks() kthread at boot time
rcu: Fix up pending cbs check in rcu_prepare_for_idle
memory-barriers: Rework multicopy-atomicity section
memory-barriers: Replace uses of "transitive"
...
Extended testing has shown that the imx ahci driver sometimes requires
more than the 100 attempts currently alotted in the driver to perform a
successful temperature reading when running at minimum (throttled) CPU
frequency.
Debugging suggests that the read cycle can take 160 attempts (which given
that the driver averages 80 readings from the ADC equates to one failure
on each read).
Increase the attempt limit to 200 in order to greatly reduce the
likelihood of the driver failing to perform a temperature reading,
especially at low CPU frequency.
Signed-off-by: Egor Starkov <egor.starkov@ge.com>
Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
Signed-off-by: Tejun Heo <tj@kernel.org>
Propagate platform device ID to DMA driver to distinguish relationship
between DMA and SATA instances.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
so John Stultz can drop that code.
-----BEGIN PGP SIGNATURE-----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=PDUR
-----END PGP SIGNATURE-----
Merge tag 'please-pull-gettime_vsyscall_update' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux
Pull ia64 update from Tony Luck:
"Stop ia64 being the last holdout using GENERIC_TIME_VSYSCALL_OLD so
that John Stultz can drop that code"
* tag 'please-pull-gettime_vsyscall_update' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
ia64: Update fsyscall gettime to use modern vsyscall_update
Small Things:
- Move OpenRISC docs into Documentation and clean them up
- Document previously undocumented devicetree bindings
- Update the or1ksim dts to use stdout-path
OpenRISC SMP support details:
- First the "use shadow registers" and "define CPU_BIG_ENDIAN as true"
get the architecture ready for SMP.
- The "add 1 and 2 byte cmpxchg support" and "use qspinlocks and
qrwlocks" add the SMP locking infrastructure as needed. Using the
qspinlocks and qrwlocks as suggested by Peter Z while reviewing the
original spinlocks implementation.
- The "support for ompic" adds a new irqchip device which is used for
IPI communication to support SMP.
- The "initial SMP support" adds smp.c and makes changes to all of the
necessary data-structures to be per-cpu.
- The remaining patches are bug fixes and debug helpers which I wanted
to keep separate from the "initial SMP support" in order to allow them
to be reviewed on their own. This includes:
- add cacheflush support to fix icache aliasing
- fix initial preempt state for secondary cpu tasks
- sleep instead of spin on secondary wait
- support framepointers and STACKTRACE_SUPPORT
- enable LOCKDEP_SUPPORT and irqflags tracing
- timer sync: Add tick timer sync logic
- fix possible deadlock in timer sync, pointed out by mips guys
Note: the irqchip patch was reviewed with Marc and we agreed to push it
together with these patches.
-----BEGIN PGP SIGNATURE-----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=euP7
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://github.com/openrisc/linux
Pull OpenRISC updates from Stafford Horne:
"The OpenRISC work is a bit more interesting this time, adding SMP
support and a few general cleanups.
Small Things:
- Move OpenRISC docs into Documentation and clean them up
- Document previously undocumented devicetree bindings
- Update the or1ksim dts to use stdout-path
OpenRISC SMP support details:
- First the "use shadow registers" and "define CPU_BIG_ENDIAN as
true" get the architecture ready for SMP.
- The "add 1 and 2 byte cmpxchg support" and "use qspinlocks and
qrwlocks" add the SMP locking infrastructure as needed. Using the
qspinlocks and qrwlocks as suggested by Peter Z while reviewing the
original spinlocks implementation.
- The "support for ompic" adds a new irqchip device which is used for
IPI communication to support SMP.
- The "initial SMP support" adds smp.c and makes changes to all of
the necessary data-structures to be per-cpu.
The remaining patches are bug fixes and debug helpers which I wanted
to keep separate from the "initial SMP support" in order to allow them
to be reviewed on their own. This includes:
- add cacheflush support to fix icache aliasing
- fix initial preempt state for secondary cpu tasks
- sleep instead of spin on secondary wait
- support framepointers and STACKTRACE_SUPPORT
- enable LOCKDEP_SUPPORT and irqflags tracing
- timer sync: Add tick timer sync logic
- fix possible deadlock in timer sync, pointed out by mips guys
Note: the irqchip patch was reviewed with Marc and we agreed to push
it together with these patches"
* tag 'for-linus' of git://github.com/openrisc/linux:
openrisc: fix possible deadlock scenario during timer sync
openrisc: pass endianness info to sparse
openrisc: add tick timer multi-core sync logic
openrisc: enable LOCKDEP_SUPPORT and irqflags tracing
openrisc: support framepointers and STACKTRACE_SUPPORT
openrisc: add simple_smp dts and defconfig for simulators
openrisc: add cacheflush support to fix icache aliasing
openrisc: sleep instead of spin on secondary wait
openrisc: fix initial preempt state for secondary cpu tasks
openrisc: initial SMP support
irqchip: add initial support for ompic
dt-bindings: add openrisc to vendor prefixes list
openrisc: use qspinlocks and qrwlocks
openrisc: add 1 and 2 byte cmpxchg support
openrisc: use shadow registers to save regs on exception
dt-bindings: openrisc: Add OpenRISC platform SoC
Documentation: openrisc: Updates to README
Documentation: Move OpenRISC docs out of arch/
MAINTAINERS: Add OpenRISC pic maintainer
openrisc: dts: or1ksim: Add stdout-path
- More printk modernization,
- Various cleanups and fixes (incl. a race condition) for Mac,
- Defconfig updates.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=cuxe
-----END PGP SIGNATURE-----
Merge tag 'm68k-for-v4.15-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
- more printk modernization
- various cleanups and fixes (incl. a race condition) for Mac
- defconfig updates
* tag 'm68k-for-v4.15-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k/defconfig: Update defconfigs for v4.14-rc7
m68k/mac: Add mutual exclusion for IOP interrupt polling
m68k/mac: Disentangle VIA/RBV and NuBus initialization
m68k/mac: Disentangle VIA and OSS initialization
m68k/mac: More printk modernization
Prevents holding an unnecessary op while the kernel processes another op
and yields the CPU.
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
The previous code path was to mark the inode dirty, let
orangefs_inode_dirty set a flag in our private inode, then later during
inode release call orangefs_flush_inode which notices the flag and
writes the atime out.
The code path worked almost identically for mtime, ctime, and mode
except that those flags are set explicitly and not as side effects of
dirty.
Now orangefs_flush_inode is removed. Marking an inode dirty does not
imply an atime update. Any place where flags were set before is now
an explicit call to orangefs_inode_setattr. Since OrangeFS does not
utilize inode writeback, the attribute change should be written out
immediately.
Fixes generic/120.
In namei.c, there are several places where the directory mtime and ctime
are set, but only the mtime is sent to the server. These don't seem
right, but I've left them as is for now.
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Using the ARRAY_SIZE macro improves the readability of the code.
Found with Coccinelle with the following semantic patch:
@r depends on (org || report)@
type T;
T[] E;
position p;
@@
(
(sizeof(E)@p /sizeof(*E))
|
(sizeof(E)@p /sizeof(E[...]))
|
(sizeof(E)@p /sizeof(T))
)
Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
iw_cxgb4 has many BUG_ON()s that were left over from various enhancemnets
made over the years. Almost all of them should just be removed. Some,
however indicate a ULP usage error and can be handled w/o bringing down
the system.
If the condition cannot happen with correctly implemented cxgb4 sw/fw,
then remove the BUG_ON.
If the condition indicates a misbehaving ULP (like CQ overflows), add
proper recovery logic.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
While adding a new gid, the driver currently does not return the context
back to the stack. A subsequent del_gid() (e.g, when ip address is changed)
doesn't find the right context in the driver and it ends up dropping that
request. This results in the HW caching a stale gid entry and traffic fails
because of that. Fix by returning the proper context in bnxt_re_add_gid().
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In bnxt_qplib_process_qp_event(), for qp error events we look up the
qp-handle and pass it for further processing. But we don't check if the
handle is NULL. This could lead to a crash in the called functions when
that qp-handle is dereferenced, if the qp is destroyed in the meantime.
Fix this by checking for a valid qp-handle in that function.
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This is a shared tree between drm and audio for some amd bits.
* 'linus-4.14-rc4-acp-prereq' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu Moving amdgpu asic types to a separate file
ASoC: AMD: Added asic_type as ACP DMA driver platform data
drm/amd/amdgpu: Added asic_type as ACP DMA driver platform data
Pull s390 updates from Heiko Carstens:
"Since Martin is on vacation you get the s390 pull request for the
v4.15 merge window this time from me.
Besides a lot of cleanups and bug fixes these are the most important
changes:
- a new regset for runtime instrumentation registers
- hardware accelerated AES-GCM support for the aes_s390 module
- support for the new CEX6S crypto cards
- support for FORTIFY_SOURCE
- addition of missing z13 and new z14 instructions to the in-kernel
disassembler
- generate opcode tables for the in-kernel disassembler out of a
simple text file instead of having to manually maintain those
tables
- fast memset16, memset32 and memset64 implementations
- removal of named saved segment support
- hardware counter support for z14
- queued spinlocks and queued rwlocks implementations for s390
- use the stack_depth tracking feature for s390 BPF JIT
- a new s390_sthyi system call which emulates the sthyi (store
hypervisor information) instruction
- removal of the old KVM virtio transport
- an s390 specific CPU alternatives implementation which is used in
the new spinlock code"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (88 commits)
MAINTAINERS: add virtio-ccw.h to virtio/s390 section
s390/noexec: execute kexec datamover without DAT
s390: fix transactional execution control register handling
s390/bpf: take advantage of stack_depth tracking
s390: simplify transactional execution elf hwcap handling
s390/zcrypt: Rework struct ap_qact_ap_info.
s390/virtio: remove unused header file kvm_virtio.h
s390: avoid undefined behaviour
s390/disassembler: generate opcode tables from text file
s390/disassembler: remove insn_to_mnemonic()
s390/dasd: avoid calling do_gettimeofday()
s390: vfio-ccw: Do not attempt to free no-op, test and tic cda.
s390: remove named saved segment support
s390/archrandom: Reconsider s390 arch random implementation
s390/pci: do not require AIS facility
s390/qdio: sanitize put_indicator
s390/qdio: use atomic_cmpxchg
s390/nmi: avoid using long-displacement facility
s390: pass endianness info to sparse
s390/decompressor: remove informational messages
...
Struct mlx5_ib_striding_rq_caps was not aligned to 64 bit as
it should have been. Add a 32 bit reserved field.
Fixes: b4f34597a5 ('IB/mlx5: Expose multi-packet RQ capabilities')
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Since there is nothing done with non zero return value, such check is
avoided.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Maximal message should be used as a limit to the max message payload allowed,
without the headers. The ConnectX-3 check is done against this value includes
the headers. When the payload is 4K this will cause the NIC to drop packets.
Increase maximal message to 8K as workaround, this shouldn't change current
behaviour because we continue to set the MTU to 4k.
To reproduce;
set MTU to 4296 on the corresponding interface, for example:
ifconfig eth0 mtu 4296 (both server and client)
On server:
ib_send_bw -c UD -d mlx4_0 -s 4096 -n 1000000 -i1 -m 4096
On client:
ib_send_bw -d mlx4_0 -c UD <server_ip> -s 4096 -n 1000000 -i 1 -m 4096
Fixes: 6e0d733d92 ("IB/mlx4: Allow 4K messages for UD QPs")
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Taking advantage of the optimization which was introduced in previous
commit ("IB/mlx4: Use optimal numbers of MTT entries") to optimize the
MTT usage for QP and CQ.
Signed-off-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Optimize the device performance by assigning multiple physical pages,
which are contiguous, to a single MTT. As a result, the number of MTTs
is reduced and in turn save cache misses of MTTs.
Signed-off-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Pull m68k updates from Greg Ungerer:
"The bulk of the changes are to support the ColdFire 5441x SoC family
with their MMU enabled. The parts have been supported for a long time
now, but only in no-MMU mode.
Angelo Dureghello has a new board with a 5441x and we have ironed out
the last problems with MMU enabled on it. So there is also some
changes to properly support that board too.
Also a fix for a link problem when selecting the traditional 68k beep
device in no-MMU configurations"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: add Sysam stmark2 open board support
m68k: coldfire: add dspi0 module support
m68k: pull mach_beep in setup.c
m68k: allow ColdFire m5441x parts to run with MMU enabled
m68k: fix ColdFire node shift size calculation
m68k: move coldfire MMU initialization code
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The bottom two bits of the simd value were being put into
the upper bits of the wave value which was likely working due
to the bits being ignored (or aliased).
Eitherway, now we mask it correctly.
(v2) Touch up using GENMASK_ULL to a couple of other functions too
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Even when it's a small handle it as 64bit value as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is already hooked up to the "amdgpu_gpr" debugfs file used by
the umr userspace debugging tool.
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ken Wang <Ken.Wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- qxl: Use a shadow bo as primary and blit to it to fix flicker (Gerd)
- rockchip: Convert psr spinlock to mutex (Emil)
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Gerd Hoffmann <kraxel@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEfxcpfMSgdnQMs+QqlvcN/ahKBwoFAloJ8gUACgkQlvcN/ahK
BwruCAf/afFM64VPaMhYwl5ejfDHs39TuahlOPZ2/wx8ABdk9y5RVtidoi5grk7a
KSJcR0jPMeCnhWmEod2nEADtIxOvyq30EdttGX/OGWv0ydTqb5peCbYbc7H3J1N/
nCdHDygC6a3/0/mFuTVNnKMhiggPmbBZKjFiXMv8t2GQXJd1iDn4WS1A8JoL3zE3
Ey4ZV+m7dsm1fQB5B+/84zG34SeqQ7N7sUHm3N9DUGXgfCfbodvb8uKfh4DB8dIU
JOXiD60GGZ21HhEdZWcVleZLfNoM6tAHD6q6g8mrPAmUM60Naf0THQrnVH8xNONc
B1v53iQrqxjF9O/oMpycc1dGXxbnRA==
=cz6U
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2017-11-13' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
Driver Changes:
- qxl: Use a shadow bo as primary and blit to it to fix flicker (Gerd)
- rockchip: Convert psr spinlock to mutex (Emil)
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Gerd Hoffmann <kraxel@redhat.com>
* tag 'drm-misc-fixes-2017-11-13' of git://anongit.freedesktop.org/drm/drm-misc:
drm/rockchip: analogix_dp: Use mutex rather than spinlock
-----BEGIN PGP SIGNATURE-----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=crrm
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-fixes-2017-11-10' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
drm/i915 fixes for v4.15
* tag 'drm-intel-next-fixes-2017-11-10' of git://anongit.freedesktop.org/drm/drm-intel:
drm/i915: Reorder context-close to avoid calling i915_vma_close() under RCU
drm/i915: Move init_clock_gating() back to where it was
drm/i915: Prune the reservation shared fence array
drm/i915: Idle the GPU before shinking everything
drm/i915: Lock llist_del_first() vs llist_del_all()
drm/i915: Calculate ironlake intermediate watermarks correctly, v2.
drm/i915: Disable lazy PPGTT page table optimization for vGPU
drm/i915/execlists: Remove the priority "optimisation"
drm/i915: Filter out spurious execlists context-switch interrupts
- qxl: Use a shadow bo as primary and blit to it to fix flicker (Gerd)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEfxcpfMSgdnQMs+QqlvcN/ahKBwoFAln7GdwACgkQlvcN/ahK
BwqqiggAgZSKgZzxgu5eBepENn9RiYuShC9jZPPSlA6FUKZ+2gFXdi0Ni+6fD7OV
oDliVcQWcfQDzePWiKlgObCLNMVEpNcGbIyqwJbEY8k664hh2bQVVuB0fZiPY8nn
Oc4ExSSePrhoam+fuOLfS39xERpAtG7j2cVxnLfrUBxM6wLo9FpwmD+mUCKorO1F
iF37uPQ571dTNheQK99KDJctFu4tzm9z0Jfbne4bF10rA+02/0Ov6cW/SOwlIdQ5
bMrwHQ7NGIDtipyKNzOQO8rVC7a+afmKC7+mQd5yMEFg+7EglPe1u1mI7YyhL6Z3
G1ihIpbTUyjeE60/8epFHtOg38/5NA==
=inUI
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2017-11-02' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
Driver Changes:
- qxl: Use a shadow bo as primary and blit to it to fix flicker (Gerd)
* tag 'drm-misc-fixes-2017-11-02' of git://anongit.freedesktop.org/drm/drm-misc:
qxl: alloc & use shadow for dumb buffers
drm/qxl: replace QXL_INFO with DRM_DEBUG_DRIVER
Fixed reference to file HD-Audio-Models.rst which has been moved to
hd-audio/models.rst
Signed-off-by: Chris Gorman <chrisjohgorman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When working over a RoCE network, the UDP source port should be set only
for statically connected QPs (RC, UC and XRC).
Fixes: 2811ba51b0 ("IB/mlx5: Add RoCE fields to Address Vector")
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The UMR's QP is created by calling mlx5_ib_create_qp directly, and
therefore the send CQ and the recv CQ on the ibqp weren't assigned.
Assign them right after calling the mlx5_ib_create_qp to assure
that any access to those pointers will work as expected and won't
crash the system as might happen as part of reset flow.
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
