i.MX driver changes for 5.3:
- Add i.MX SCU based SoC bus driver for i.MX8QXP SoC support, which
talks to SCU firmware for getting SoC ID and revision.
- Update soc-imx8 bus driver to read imx8mm soc revision from anatop.
- Add i.MX8MN SoC bus support into soc-imx8 driver.
- Various small improvements on soc-imx8 bus driver.
* tag 'imx-drivers-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: Add i.MX8MN SoC driver support
soc: imx8: Use existing of_root directly
soc: imx8: Fix potential kernel dump in error path
soc: imx: soc-imx8: Correct return value of error handle
soc: imx: soc-imx8: Avoid unnecessary of_node_put() in error handling
soc: imx: Add SCU SoC info driver support
soc: imx: Read imx8mm soc revision from anatop
Signed-off-by: Olof Johansson <olof@lixom.net>
ASPEED SoC updates for 5.3
LPC control driver changes and a fix.
* tag 'aspeed-5.3-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
soc: aspeed: lpc-ctrl: Fix probe error handling
soc: aspeed: lpc-ctrl: make parameter optional
Signed-off-by: Olof Johansson <olof@lixom.net>
soc: tegra: Changes for v5.3-rc1
This contains a set of minor fixes and cleanups for core Tegra drivers.
* tag 'tegra-for-5.3-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: Select pinctrl for Tegra194
soc/tegra: fuse: Do not log error message on deferred probe
soc/tegra: pmc: Add comments clarifying wake events
soc/tegra: pmc: Avoid crash for non-wake IRQs
soc/tegra: pmc: Fail to allocate more than one wake IRQ
Signed-off-by: Olof Johansson <olof@lixom.net>
memory: tegra: Changes for v5.3-rc1
A single fix for an unused constant variable, due to it being declared
outside the only #ifdef that it was being used from.
* tag 'tegra-for-5.3-memory' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
memory: tegra: Fix -Wunused-const-variable
Signed-off-by: Olof Johansson <olof@lixom.net>
firmware: tegra: Changes for v5.3-rc1
This contains a single, simple change that resumes the BPMP driver early
so that it is available when the various consumers want to enable their
clocks.
* tag 'tegra-for-5.3-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
firmware: tegra: Early resume BPMP
Signed-off-by: Olof Johansson <olof@lixom.net>
soc: Amlogic driver updates for v5.3
- canvas: add support for Meson8*
* tag 'amlogic-drivers' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
soc: amlogic: canvas: add support for Meson8, Meson8b and Meson8m2
dt-bindings: soc: amlogic: canvas: document support for Meson8/8b/8m2
Signed-off-by: Olof Johansson <olof@lixom.net>
Qualcomm ARM Based Driver Updates for v5.3
* Add ACPI support to Qualcomm GENI SE
* Update Qualcomm Maintainers entry to remove David Brown as maintainer and
fixup typos and incorrect DT file entry
* Fixup APR domain id usage and making callbacks in non-atomic context
* Add AOSS QMP driver and bindings
* Add power domains for MSM8998 and QCS404 in QCOM RPMPD
* Add corner macros, max state support, and fixups for setting performance state
for Qcom RPMPD
* tag 'qcom-drivers-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: geni: Add support for ACPI
MAINTAINERS: Remove myself as qcom maintainer
soc: qcom: apr: Don't use reg for domain id
soc: qcom: fix QCOM_AOSS_QMP dependency and build errors
soc: qcom: Add AOSS QMP driver
dt-bindings: soc: qcom: Add AOSS QMP binding
qcom: apr: Make apr callbacks in non-atomic context
soc: qcom: rpmpd: Add MSM8998 power-domains
dt-bindings: power: Add rpm power domain bindings for msm8998
soc: qcom: rpmpd: Add QCS404 power-domains
dt-bindings: power: Add rpm power domain bindings for qcs404
soc: qcom: rpmpd: Modify corner defining macros
soc: qcom: rpmpd: Add support to set rpmpd state to max
soc: qcom: rpmpd: fixup rpmpd set performance state
MAINTAINER: Fix Qualcomm ETHQOS ethernet DT file
MAINTAINERS: fix typo in file name
Signed-off-by: Olof Johansson <olof@lixom.net>
gcc warns that a mising "flash" phandle node leads to undefined
behavior later:
drivers/soc/aspeed/aspeed-lpc-ctrl.c: In function 'aspeed_lpc_ctrl_probe':
drivers/soc/aspeed/aspeed-lpc-ctrl.c:201:18: error: '*((void *)&resm+8)' may be used uninitialized in this function [-Werror=maybe-uninitialized]
Only set the flash base and size if we find a phandle in the device
tree.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Vijay Khemka <vijaykhemka@fb.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
SOC: TI SCI updates for v5.3
- Couple of fixes to handle resource ranges and
requesting response always from firmware;
- Add processor control
- Add support APIs for DMA
- Fix the SPDX license plate
- Unused varible warning fix
* tag 'drivers_soc_for_5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
firmware: ti_sci: Fix gcc unused-but-set-variable warning
firmware: ti_sci: Use the correct style for SPDX License Identifier
firmware: ti_sci: Parse all resource ranges even if some is not available
firmware: ti_sci: Add support for processor control
firmware: ti_sci: Add resource management APIs for ringacc, psi-l and udma
firmware: ti_sci: Always request response from firmware
Signed-off-by: Olof Johansson <olof@lixom.net>
When booting with ACPI as the active set of configuration tables,
all; clocks, regulators, pin functions ect are expected to be at
their ideal values/levels/rates, thus the associated frameworks
are unavailable. Ensure calls to these APIs are shielded when
ACPI is enabled.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/firmware/ti_sci.c: In function ti_sci_cmd_ring_config:
drivers/firmware/ti_sci.c:2035:17: warning: variable dev set but not used [-Wunused-but-set-variable]
drivers/firmware/ti_sci.c: In function ti_sci_cmd_ring_get_config:
drivers/firmware/ti_sci.c:2104:17: warning: variable dev set but not used [-Wunused-but-set-variable]
drivers/firmware/ti_sci.c: In function ti_sci_cmd_rm_udmap_tx_ch_cfg:
drivers/firmware/ti_sci.c:2287:17: warning: variable dev set but not used [-Wunused-but-set-variable]
drivers/firmware/ti_sci.c: In function ti_sci_cmd_rm_udmap_rx_ch_cfg:
drivers/firmware/ti_sci.c:2357:17: warning: variable dev set but not used [-Wunused-but-set-variable]
Use the 'dev' variable instead of info->dev to fix this.
Acked-by: Suman Anna <s-anna@ti.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
This patch corrects the SPDX License Identifier style
in header file related to Firmware Drivers for Texas
Instruments SCI Protocol.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used)
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
There is common of_root for reference, no need to find it
from DT again, use of_root directly to make driver simple.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
ARM SCMI updates/fixes for v5.3
1. Correction to ARM document ID referred in SCMI protocol binding
2. Fix to correct bitfield definitions for SENSOR_DESC attributes which
otherwise will calculate sensor values on wrong scale
3. Adds the missing rate_discrete flag setting so that discrete clocks
are handled correctly. Without this fix it assumes continuous range
which is incorrect
4. Adds support to read and scale the sensor values based on the factor
read from the firmware
* tag 'scmi-updates-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
hwmon: scmi: Scale values to target desired HWMON units
firmware: arm_scmi: fetch and store sensor scale
firmware: arm_scmi: update rate_discrete in clock_describe_rates_get
firmware: arm_scmi: fix bitfield definitions for SENSOR_DESC attributes
dt-bindings: arm: fix the document ID for SCMI protocol documentation
Signed-off-by: Olof Johansson <olof@lixom.net>
ti-sysc interconnect target module driver changes for v5.3
This series of changes improves probing devices with ti-sysc to the
point where we can now probe most devices without the custom dts
property "ti,hwmods" and no legacy platform data :)
We add support for platform data callbacks for idling and unidling the
clockdomain the module belongs to. The rest of the series mostly adds
handling for the various quirks needed by old legacy modules such as
i2c and watchdog. Some quirk handling is still missing for few modules,
but those will be added as they get tested.
The related platform data and dts changes will be sent separately.
* tag 'omap-for-v5.3/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
bus: ti-sysc: Add support for module specific reset quirks
bus: ti-sysc: Detect uarts also on omap34xx
bus: ti-sysc: Do rstctrl reset handling in two phases
bus: ti-sysc: Add support for disabling module without legacy mode
bus: ti-sysc: Set ENAWAKEUP if available
bus: ti-sysc: Handle swsup idle mode quirks
bus: ti-sysc: Handle clockactivity for enable and disable
bus: ti-sysc: Enable interconnect target module autoidle bit on enable
bus: ti-sysc: Allow QUIRK_LEGACY_IDLE even if legacy_mode is not set
bus: ti-sysc: Make OCP reset work for sysstatus and sysconfig reset bits
bus: ti-sysc: Support 16-bit writes too
bus: ti-sysc: Add support for missing clockdomain handling
ARM: dts: dra71x: Disable usb4_tm target module
ARM: dts: dra71x: Disable rtc target module
ARM: dts: dra76x: Disable usb4_tm target module
ARM: dts: dra76x: Disable rtc target module
ARM: dts: dra76x: Update MMC2_HS200_MANUAL1 iodelay values
ARM: dts: am57xx-idk: Remove support for voltage switching for SD card
bus: ti-sysc: Handle devices with no control registers
ARM: dts: Configure osc clock for d_can on am335x
Signed-off-by: Olof Johansson <olof@lixom.net>
This pull request contains Broadcom ARM/ARM64/MIPS SoCs drivers changes
for 5.3, please pull the following:
- Markus provides a set of updates to the DPFE driver to support a new
revision of the API to the firmware (version 3) and provides minor fixes
about how the MR4-8 words are read for LPDDR4 devices
- Florian removes a print of a virtual address in brcmstb_gisb.c
* tag 'arm-soc/for-5.3/drivers' of https://github.com/Broadcom/stblinux:
memory: brcmstb: dpfe: introduce DPFE API v3
memory: brcmstb: dpfe: prepare for API-dependent sysfs attributes
memory: brcmstb: dpfe: prepare support for multiple API versions
memory: brcmstb: dpfe: wait for DCPU to be ready
memory: brcmstb: dpfe: report firmware loading error
memory: brcmstb: dpfe: remove unused code and fix formatting
bus: brcmstb_gisb: Remove print of base address
memory: brcmstb: dpfe: use byte 3 of registers MR4-MR8
memory: brcmstb: dpfe: optimize generic_show()
memory: brcmstb: dpfe: use msleep() over udelay()
Signed-off-by: Olof Johansson <olof@lixom.net>
Since commit 85f1abe001 ("kthread, sched/wait: Fix kthread_parkme()
completion issue"), kthreads that are bound to a CPU must be parked
before being stopped. At the moment the PSCI checker calls
kthread_stop() directly on the suspend kthread, which triggers the
following warning:
[ 6.068288] WARNING: CPU: 1 PID: 1 at kernel/kthread.c:398 __kthread_bind_mask+0x20/0x78
...
[ 6.190151] Call trace:
[ 6.192566] __kthread_bind_mask+0x20/0x78
[ 6.196615] kthread_unpark+0x74/0x80
[ 6.200235] kthread_stop+0x44/0x1d8
[ 6.203769] psci_checker+0x3bc/0x484
[ 6.207389] do_one_initcall+0x48/0x260
[ 6.211180] kernel_init_freeable+0x2c8/0x368
[ 6.215488] kernel_init+0x10/0x100
[ 6.218935] ret_from_fork+0x10/0x1c
[ 6.222467] ---[ end trace e05e22863d043cd3 ]---
kthread_unpark() tries to bind the thread to its CPU and aborts with a
WARN() if the thread wasn't in TASK_PARKED state. Park the kthreads
before stopping them.
Fixes: 85f1abe001 ("kthread, sched/wait: Fix kthread_parkme() completion issue")
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Now that jedec_ddr_data.c was moved from lib/ to drivers/memory/,
<memory/jedec_ddr.h> is included only from drivers/memory/.
Make it a local header of drivers/memory/.
The directory include/memory is now gone.
While I am here, I also changed #include <linux/module.h> to
<linux/export.h>. Because CONFIG_DDR is bool, jedec_ddr_data.c is
never compiled as a module.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
jedec_ddr_data.c exports 3 symbols, and all of them are only
referenced from drivers/memory/{emif.c,of_memory.c}
drivers/memory/ is a better location than lib/.
I removed the Kconfig prompt "JEDEC DDR data" because it is only
select'ed by TI_EMIF, and there is no other user. There is no good
reason in making it a user-configurable CONFIG option.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
NXP/FSL SoC driver updates for v5.3
DPAA2 Console driver
- Add driver to export two char devices to dump logs for MC and
AIOP
DPAA2 DPIO driver
- Add support for memory backed QBMan portals
- Increase the timeout period to prevent false error
- Add APIs to retrieve QBMan portal probing status
DPAA Qman driver
- Only make liodn fixup on powerpc SoCs with PAMU iommu
* tag 'soc-fsl-next-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
soc: fsl: qbman_portals: add APIs to retrieve the probing status
soc: fsl: qman: fixup liodns only on ppc targets
soc: fsl: dpio: Add support for memory backed QBMan portals
bus: mc-bus: Add support for mapping shareable portals
soc: fsl: dpio: Increase timeout for QBMan Management Commands
soc: fsl: add DPAA2 console support
Documentation: DT: Add entry for DPAA2 console
soc: fsl: guts: Add definition for LX2160A
Signed-off-by: Olof Johansson <olof@lixom.net>
I no longer regularly work on this platform, and only have a few
increasingly outdated boards. Andy has primarily been doing the
maintenance.
Signed-off-by: David Brown <david.brown@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
Making memory-region and flash as optional parameter in device
tree if user needs to use these parameter through ioctl then
need to define in devicetree.
Signed-off-by: Vijay Khemka <vijaykhemka@fb.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Pull x86 fixes from Thomas Gleixner:
"The accumulated fixes from this and last week:
- Fix vmalloc TLB flush and map range calculations which lead to
stale TLBs, spurious faults and other hard to diagnose issues.
- Use fault_in_pages_writable() for prefaulting the user stack in the
FPU code as it's less fragile than the current solution
- Use the PF_KTHREAD flag when checking for a kernel thread instead
of current->mm as the latter can give the wrong answer due to
use_mm()
- Compute the vmemmap size correctly for KASLR and 5-Level paging.
Otherwise this can end up with a way too small vmemmap area.
- Make KASAN and 5-level paging work again by making sure that all
invalid bits are masked out when computing the P4D offset. This
worked before but got broken recently when the LDT remap area was
moved.
- Prevent a NULL pointer dereference in the resource control code
which can be triggered with certain mount options when the
requested resource is not available.
- Enforce ordering of microcode loading vs. perf initialization on
secondary CPUs. Otherwise perf tries to access a non-existing MSR
as the boot CPU marked it as available.
- Don't stop the resource control group walk early otherwise the
control bitmaps are not updated correctly and become inconsistent.
- Unbreak kgdb by returning 0 on success from
kgdb_arch_set_breakpoint() instead of an error code.
- Add more Icelake CPU model defines so depending changes can be
queued in other trees"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode, cpuhotplug: Add a microcode loader CPU hotplug callback
x86/kasan: Fix boot with 5-level paging and KASAN
x86/fpu: Don't use current->mm to check for a kthread
x86/kgdb: Return 0 from kgdb_arch_set_breakpoint()
x86/resctrl: Prevent NULL pointer dereference when local MBM is disabled
x86/resctrl: Don't stop walking closids when a locksetup group is found
x86/fpu: Update kernel's FPU state before using for the fsave header
x86/mm/KASLR: Compute the size of the vmemmap section properly
x86/fpu: Use fault_in_pages_writeable() for pre-faulting
x86/CPU: Add more Icelake model numbers
mm/vmalloc: Avoid rare case of flushing TLB with weird arguments
mm/vmalloc: Fix calculation of direct map addr range
Pull timer fixes from Thomas Gleixner:
"A set of small fixes:
- Repair the ktime_get_coarse() functions so they actually deliver
what they are supposed to: tick granular time stamps. The current
code missed to add the accumulated nanoseconds part of the
timekeeper so the resulting granularity was 1 second.
- Prevent the tracer from infinitely recursing into time getter
functions in the arm architectured timer by marking these functions
notrace
- Fix a trivial compiler warning caused by wrong qualifier ordering"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Repair ktime_get_coarse*() granularity
clocksource/drivers/arm_arch_timer: Don't trace count reader functions
clocksource/drivers/timer-ti-dm: Change to new style declaration
Pull RAS fixes from Thomas Gleixner:
"Two small fixes for RAS:
- Use a proper search algorithm to find the correct element in the
CEC array. The replacement was a better choice than fixing the
crash causes by the original search function with horrible duct
tape.
- Move the timer based decay function into thread context so it can
actually acquire the mutex which protects the CEC array to prevent
corruption"
* 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
RAS/CEC: Convert the timer callback to a workqueue
RAS/CEC: Fix binary search function
Pull x86 platform driver fixes from Andy Shevchenko:
- fix a couple of Mellanox driver enumeration issues
- fix ASUS laptop regression with backlight
- fix Dell computers that got a wrong mode (tablet versus laptop) after
resume
* tag 'platform-drivers-x86-v5.2-3' of git://git.infradead.org/linux-platform-drivers-x86:
platform/mellanox: mlxreg-hotplug: Add devm_free_irq call to remove flow
platform/x86: mlx-platform: Fix parent device in i2c-mux-reg device registration
platform/x86: intel-vbtn: Report switch events when event wakes device
platform/x86: asus-wmi: Only Tell EC the OS will handle display hotkeys from asus_nb_wmi
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes for 5.2-rc5
Nothing major, just some small gadget fixes, usb-serial new device
ids, a few new quirks, and some small fixes for some regressions that
have been found after the big 5.2-rc1 merge.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: Make sure an alt mode exist before getting its partner
usb: gadget: udc: lpc32xx: fix return value check in lpc32xx_udc_probe()
usb: gadget: dwc2: fix zlp handling
usb: dwc2: Set actual frame number for completed ISOC transfer for none DDMA
usb: gadget: udc: lpc32xx: allocate descriptor with GFP_ATOMIC
usb: gadget: fusb300_udc: Fix memory leak of fusb300->ep[i]
usb: phy: mxs: Disable external charger detect in mxs_phy_hw_init()
usb: dwc2: Fix DMA cache alignment issues
usb: dwc2: host: Fix wMaxPacketSize handling (fix webcam regression)
USB: Fix chipmunk-like voice when using Logitech C270 for recording audio.
USB: usb-storage: Add new ID to ums-realtek
usb: typec: ucsi: ccg: fix memory leak in do_flash
USB: serial: option: add Telit 0x1260 and 0x1261 compositions
USB: serial: pl2303: add Allied Telesis VT-Kit3
USB: serial: option: add support for Simcom SIM7500/SIM7600 RNDIS mode
Pull powerpc fixes from Michael Ellerman:
"One fix for a regression introduced by our 32-bit KASAN support, which
broke booting on machines with "bootx" early debugging enabled.
A fix for a bug which broke kexec on 32-bit, introduced by changes to
the 32-bit STRICT_KERNEL_RWX support in v5.1.
Finally two fixes going to stable for our THP split/collapse handling,
discovered by Nick. The first fixes random crashes and/or corruption
in guests under sufficient load.
Thanks to: Nicholas Piggin, Christophe Leroy, Aaro Koskinen, Mathieu
Malaterre"
* tag 'powerpc-5.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/32s: fix booting with CONFIG_PPC_EARLY_DEBUG_BOOTX
powerpc/64s: __find_linux_pte() synchronization vs pmdp_invalidate()
powerpc/64s: Fix THP PMD collapse serialisation
powerpc: Fix kexec failure on book3s/32
Pull tracing fixes from Steven Rostedt:
- Out of range read of stack trace output
- Fix for NULL pointer dereference in trace_uprobe_create()
- Fix to a livepatching / ftrace permission race in the module code
- Fix for NULL pointer dereference in free_ftrace_func_mapper()
- A couple of build warning clean ups
* tag 'trace-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Fix NULL pointer dereference in free_ftrace_func_mapper()
module: Fix livepatch/ftrace module text permissions race
tracing/uprobe: Fix obsolete comment on trace_uprobe_create()
tracing/uprobe: Fix NULL pointer dereference in trace_uprobe_create()
tracing: Make two symbols static
tracing: avoid build warning with HAVE_NOP_MCOUNT
tracing: Fix out-of-range read in trace_stack_print()
Adric Blake reported the following warning during suspend-resume:
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
unchecked MSR access error: WRMSR to 0x10f (tried to write 0x0000000000000000) \
at rIP: 0xffffffff8d267924 (native_write_msr+0x4/0x20)
Call Trace:
intel_set_tfa
intel_pmu_cpu_starting
? x86_pmu_dead_cpu
x86_pmu_starting_cpu
cpuhp_invoke_callback
? _raw_spin_lock_irqsave
notify_cpu_starting
start_secondary
secondary_startup_64
microcode: sig=0x806ea, pf=0x80, revision=0x96
microcode: updated to revision 0xb4, date = 2019-04-01
CPU1 is up
The MSR in question is MSR_TFA_RTM_FORCE_ABORT and that MSR is emulated
by microcode. The log above shows that the microcode loader callback
happens after the PMU restoration, leading to the conjecture that
because the microcode hasn't been updated yet, that MSR is not present
yet, leading to the #GP.
Add a microcode loader-specific hotplug vector which comes before
the PERF vectors and thus executes earlier and makes sure the MSR is
present.
Fixes: 400816f60c ("perf/x86/intel: Implement support for TSX Force Abort")
Reported-by: Adric Blake <promarbler14@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: x86@kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=203637
The reg property represents the address and size on the bus that a
device lives, but for APR the parent is a rpmsg bus, which does not have
numerical addresses. Simply defining #address/#size-cells to 1 and 0,
respectively, to silence the compiler is not an appropriate solution.
Replace the use of "reg" with an APR specific property.
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Fix Kconfig warning and subsequent build errors that are caused
when PM_GENERIC_DOMAINS=y but CONFIG_PM is not set/enabled.
WARNING: unmet direct dependencies detected for PM_GENERIC_DOMAINS
Depends on [n]: PM [=n]
Selected by [m]:
- QCOM_AOSS_QMP [=m] && (ARCH_QCOM || COMPILE_TEST [=y]) && MAILBOX [=y] && COMMON_CLK [=y]
Fixes these build errors:
../drivers/base/power/domain.c: In function ‘genpd_queue_power_off_work’:
../drivers/base/power/domain.c:485:13: error: ‘pm_wq’ undeclared (first use in this function)
queue_work(pm_wq, &genpd->power_off_work);
../drivers/base/power/domain.c:485:13: note: each undeclared identifier is reported only once for each function it appears in
../drivers/base/power/domain.c: In function ‘genpd_dev_pm_qos_notifier’:
../drivers/base/power/domain.c:675:25: error: ‘struct dev_pm_info’ has no member named ‘ignore_children’
if (!dev || dev->power.ignore_children)
../drivers/base/power/domain.c: In function ‘rtpm_status_str’:
../drivers/base/power/domain.c:2754:16: error: ‘struct dev_pm_info’ has no member named ‘runtime_error’
if (dev->power.runtime_error)
../drivers/base/power/domain.c:2756:21: error: ‘struct dev_pm_info’ has no member named ‘disable_depth’
else if (dev->power.disable_depth)
../drivers/base/power/domain.c:2758:21: error: ‘struct dev_pm_info’ has no member named ‘runtime_status’
else if (dev->power.runtime_status < ARRAY_SIZE(status_lookup))
../drivers/base/power/domain.c:2759:31: error: ‘struct dev_pm_info’ has no member named ‘runtime_status’
p = status_lookup[dev->power.runtime_status];
../drivers/base/power/domain_governor.c: In function ‘default_suspend_ok’:
../drivers/base/power/domain_governor.c:82:17: error: ‘struct dev_pm_info’ has no member named ‘ignore_children’
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Andy Gross <andy.gross@linaro.org>
Cc: David Brown <david.brown@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Pull cgroup fixes from Tejun Heo:
"This has an unusually high density of tricky fixes:
- task_get_css() could deadlock when it races against a dying cgroup.
- cgroup.procs didn't list thread group leaders with live threads.
This could mislead readers to think that a cgroup is empty when
it's not. Fixed by making PROCS iterator include dead tasks. I made
a couple mistakes making this change and this pull request contains
a couple follow-up patches.
- When cpusets run out of online cpus, it updates cpusmasks of member
tasks in bizarre ways. Joel improved the behavior significantly"
* 'for-5.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cpuset: restore sanity to cpuset_cpus_allowed_fallback()
cgroup: Fix css_task_iter_advance_css_set() cset skip condition
cgroup: css_task_iter_skip()'d iterators must be advanced before accessed
cgroup: Include dying leaders with live threads in PROCS iterations
cgroup: Implement css_task_iter_skip()
cgroup: Call cgroup_release() before __exit_signal()
docs cgroups: add another example size for hugetlb
cgroup: Use css_tryget() instead of css_tryget_online() in task_get_css()
Pull drm fixes from Daniel Vetter:
"Nothing unsettling here, also not aware of anything serious still
pending.
The edid override regression fix took a bit longer since this seems to
be an area with an overabundance of bad options. But the fix we have
now seems like a good path forward.
Next week it should be back to Dave.
Summary:
- fix regression on amdgpu on SI
- fix edid override regression
- driver fixes: amdgpu, i915, mediatek, meson, panfrost
- fix writecombine for vmap in gem-shmem helper (used by panfrost)
- add more panel quirks"
* tag 'drm-fixes-2019-06-14' of git://anongit.freedesktop.org/drm/drm: (25 commits)
drm/amdgpu: return 0 by default in amdgpu_pm_load_smu_firmware
drm/amdgpu: Fix bounds checking in amdgpu_ras_is_supported()
drm: add fallback override/firmware EDID modes workaround
drm/edid: abstract override/firmware EDID retrieval
drm/i915/perf: fix whitelist on Gen10+
drm/i915/sdvo: Implement proper HDMI audio support for SDVO
drm/i915: Fix per-pixel alpha with CCS
drm/i915/dmc: protect against reading random memory
drm/i915/dsi: Use a fuzzy check for burst mode clock check
drm/amdgpu/{uvd,vcn}: fetch ring's read_ptr after alloc
drm/panfrost: Require the simple_ondemand governor
drm/panfrost: make devfreq optional again
drm/gem_shmem: Use a writecombine mapping for ->vaddr
drm: panel-orientation-quirks: Add quirk for GPD MicroPC
drm: panel-orientation-quirks: Add quirk for GPD pocket2
drm/meson: fix G12A primary plane disabling
drm/meson: fix primary plane disabling
drm/meson: fix G12A HDMI PLL settings for 4K60 1000/1001 variations
drm/mediatek: call mtk_dsi_stop() after mtk_drm_crtc_atomic_disable()
drm/mediatek: clear num_pipes when unbind driver
...
Pull gfs2 fix from Andreas Gruenbacher:
"Fix rounding error in gfs2_iomap_page_prepare"
* tag 'gfs2-v5.2.fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Fix rounding error in gfs2_iomap_page_prepare
Pull SCSI fix from James Bottomley:
"A single bug fix for hpsa.
The user visible consequences aren't clear, but the ioaccel2 raid
acceleration may misfire on the malformed request assuming the payload
is big enough to require chaining (more than 31 sg entries)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: hpsa: correct ioaccel2 chaining
Pull block fixes from Jens Axboe:
- Remove references to old schedulers for the scheduler switching and
blkio controller documentation (Andreas)
- Kill duplicate check for report zone for null_blk (Chaitanya)
- Two bcache fixes (Coly)
- Ensure that mq-deadline is selected if zoned block device is enabled,
as we need that to support them (Damien)
- Fix io_uring memory leak (Eric)
- ps3vram fallout from LBDAF removal (Geert)
- Redundant blk-mq debugfs debugfs_create return check cleanup (Greg)
- Extend NOPLM quirk for ST1000LM024 drives (Hans)
- Remove error path warning that can now trigger after the queue
removal/addition fixes (Ming)
* tag 'for-linus-20190614' of git://git.kernel.dk/linux-block:
block/ps3vram: Use %llu to format sector_t after LBDAF removal
libata: Extend quirks for the ST1000LM024 drives with NOLPM quirk
bcache: only set BCACHE_DEV_WB_RUNNING when cached device attached
bcache: fix stack corruption by PRECEDING_KEY()
blk-mq: remove WARN_ON(!q->elevator) from blk_mq_sched_free_requests
blkio-controller.txt: Remove references to CFQ
block/switching-sched.txt: Update to blk-mq schedulers
null_blk: remove duplicate check for report zone
blk-mq: no need to check return value of debugfs_create functions
io_uring: fix memory leak of UNIX domain socket inode
block: force select mq-deadline for zoned block devices
Pull i2c fixes from Wolfram Sang:
"I2C has two simple but wanted driver fixes for you"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: pca-platform: Fix GPIO lookup code
i2c: acorn: fix i2c warning
The 5.1 mount system rework changed the smackfsdef mount option to
smackfsdefault. This fixes the regression by making smackfsdef treated
the same way as smackfsdefault.
Also fix the smack_param_specs[] to have "smack" prefixes on all the
names. This isn't visible to a user unless they either:
(a) Try to mount a filesystem that's converted to the internal mount API
and that implements the ->parse_monolithic() context operation - and
only then if they call security_fs_context_parse_param() rather than
security_sb_eat_lsm_opts().
There are no examples of this upstream yet, but nfs will probably want
to do this for nfs2 or nfs3.
(b) Use fsconfig() to configure the filesystem - in which case
security_fs_context_parse_param() will be called.
This issue is that smack_sb_eat_lsm_opts() checks for the "smack" prefix
on the options, but smack_fs_context_parse_param() does not.
Fixes: c3300aaf95 ("smack: get rid of match_token()")
Fixes: 2febd254ad ("smack: Implement filesystem context security hooks")
Cc: stable@vger.kernel.org
Reported-by: Jose Bollo <jose.bollo@iot.bzh>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Selecting HAVE_NOP_MCOUNT enables -mnop-mcount (if gcc supports it)
and sets CC_USING_NOP_MCOUNT. Reuse __is_defined (which is suitable for
testing CC_USING_* defines) to avoid conditional compilation and fix
the following gcc 9 warning on s390:
kernel/trace/ftrace.c:2514:1: warning: ‘ftrace_code_disable’ defined
but not used [-Wunused-function]
Link: http://lkml.kernel.org/r/patch.git-1a82d13f33ac.your-ad-here.call-01559732716-ext-6629@work.hours
Fixes: 2f4df0017b ("tracing: Add -mcount-nop option support")
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
