forked from Minki/linux
20b7fee738
254 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Dave Hansen
|
79c28a4167 |
mm/numa: automatically generate node migration order
Patch series "Migrate Pages in lieu of discard", v11. We're starting to see systems with more and more kinds of memory such as Intel's implementation of persistent memory. Let's say you have a system with some DRAM and some persistent memory. Today, once DRAM fills up, reclaim will start and some of the DRAM contents will be thrown out. Allocations will, at some point, start falling over to the slower persistent memory. That has two nasty properties. First, the newer allocations can end up in the slower persistent memory. Second, reclaimed data in DRAM are just discarded even if there are gobs of space in persistent memory that could be used. This patchset implements a solution to these problems. At the end of the reclaim process in shrink_page_list() just before the last page refcount is dropped, the page is migrated to persistent memory instead of being dropped. While I've talked about a DRAM/PMEM pairing, this approach would function in any environment where memory tiers exist. This is not perfect. It "strands" pages in slower memory and never brings them back to fast DRAM. Huang Ying has follow-on work which repurposes NUMA balancing to promote hot pages back to DRAM. This is also all based on an upstream mechanism that allows persistent memory to be onlined and used as if it were volatile: http://lkml.kernel.org/r/20190124231441.37A4A305@viggo.jf.intel.com With that, the DRAM and PMEM in each socket will be represented as 2 separate NUMA nodes, with the CPUs sit in the DRAM node. So the general inter-NUMA demotion mechanism introduced in the patchset can migrate the cold DRAM pages to the PMEM node. We have tested the patchset with the postgresql and pgbench. On a 2-socket server machine with DRAM and PMEM, the kernel with the patchset can improve the score of pgbench up to 22.1% compared with that of the DRAM only + disk case. This comes from the reduced disk read throughput (which reduces up to 70.8%). == Open Issues == * Memory policies and cpusets that, for instance, restrict allocations to DRAM can be demoted to PMEM whenever they opt in to this new mechanism. A cgroup-level API to opt-in or opt-out of these migrations will likely be required as a follow-on. * Could be more aggressive about where anon LRU scanning occurs since it no longer necessarily involves I/O. get_scan_count() for instance says: "If we have no swap space, do not bother scanning anon pages" This patch (of 9): Prepare for the kernel to auto-migrate pages to other memory nodes with a node migration table. This allows creating single migration target for each NUMA node to enable the kernel to do NUMA page migrations instead of simply discarding colder pages. A node with no target is a "terminal node", so reclaim acts normally there. The migration target does not fundamentally _need_ to be a single node, but this implementation starts there to limit complexity. When memory fills up on a node, memory contents can be automatically migrated to another node. The biggest problems are knowing when to migrate and to where the migration should be targeted. The most straightforward way to generate the "to where" list would be to follow the page allocator fallback lists. Those lists already tell us if memory is full where to look next. It would also be logical to move memory in that order. But, the allocator fallback lists have a fatal flaw: most nodes appear in all the lists. This would potentially lead to migration cycles (A->B, B->A, A->B, ...). Instead of using the allocator fallback lists directly, keep a separate node migration ordering. But, reuse the same data used to generate page allocator fallback in the first place: find_next_best_node(). This means that the firmware data used to populate node distances essentially dictates the ordering for now. It should also be architecture-neutral since all NUMA architectures have a working find_next_best_node(). RCU is used to allow lock-less read of node_demotion[] and prevent demotion cycles been observed. If multiple reads of node_demotion[] are performed, a single rcu_read_lock() must be held over all reads to ensure no cycles are observed. Details are as follows. === What does RCU provide? === Imagine a simple loop which walks down the demotion path looking for the last node: terminal_node = start_node; while (node_demotion[terminal_node] != NUMA_NO_NODE) { terminal_node = node_demotion[terminal_node]; } The initial values are: node_demotion[0] = 1; node_demotion[1] = NUMA_NO_NODE; and are updated to: node_demotion[0] = NUMA_NO_NODE; node_demotion[1] = 0; What guarantees that the cycle is not observed: node_demotion[0] = 1; node_demotion[1] = 0; and would loop forever? With RCU, a rcu_read_lock/unlock() can be placed around the loop. Since the write side does a synchronize_rcu(), the loop that observed the old contents is known to be complete before the synchronize_rcu() has completed. RCU, combined with disable_all_migrate_targets(), ensures that the old migration state is not visible by the time __set_migration_target_nodes() is called. === What does READ_ONCE() provide? === READ_ONCE() forbids the compiler from merging or reordering successive reads of node_demotion[]. This ensures that any updates are *eventually* observed. Consider the above loop again. The compiler could theoretically read the entirety of node_demotion[] into local storage (registers) and never go back to memory, and *permanently* observe bad values for node_demotion[]. Note: RCU does not provide any universal compiler-ordering guarantees: https://lore.kernel.org/lkml/20150921204327.GH4029@linux.vnet.ibm.com/ This code is unused for now. It will be called later in the series. Link: https://lkml.kernel.org/r/20210721063926.3024591-1-ying.huang@intel.com Link: https://lkml.kernel.org/r/20210715055145.195411-1-ying.huang@intel.com Link: https://lkml.kernel.org/r/20210715055145.195411-2-ying.huang@intel.com Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Yang Shi <shy828301@gmail.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Michal Hocko <mhocko@suse.com> Cc: Wei Xu <weixugc@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: Keith Busch <kbusch@kernel.org> Cc: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Mike Rapoport
|
c803b3c8b3 |
mm: introduce memmap_alloc() to unify memory map allocation
There are several places that allocate memory for the memory map: alloc_node_mem_map() for FLATMEM, sparse_buffer_init() and __populate_section_memmap() for SPARSEMEM. The memory allocated in the FLATMEM case is zeroed and it is never poisoned, regardless of CONFIG_PAGE_POISON setting. The memory allocated in the SPARSEMEM cases is not zeroed and it is implicitly poisoned inside memblock if CONFIG_PAGE_POISON is set. Introduce memmap_alloc() wrapper for memblock allocators that will be used for both FLATMEM and SPARSEMEM cases and will makei memory map zeroing and poisoning consistent for different memory models. Link: https://lkml.kernel.org/r/20210714123739.16493-4-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Michal Simek <monstr@monstr.eu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Mike Rapoport
|
6aeb25425d |
mmap: make mlock_future_check() global
Patch series "mm: introduce memfd_secret system call to create "secret" memory areas", v20.
This is an implementation of "secret" mappings backed by a file
descriptor.
The file descriptor backing secret memory mappings is created using a
dedicated memfd_secret system call The desired protection mode for the
memory is configured using flags parameter of the system call. The mmap()
of the file descriptor created with memfd_secret() will create a "secret"
memory mapping. The pages in that mapping will be marked as not present
in the direct map and will be present only in the page table of the owning
mm.
Although normally Linux userspace mappings are protected from other users,
such secret mappings are useful for environments where a hostile tenant is
trying to trick the kernel into giving them access to other tenants
mappings.
It's designed to provide the following protections:
* Enhanced protection (in conjunction with all the other in-kernel
attack prevention systems) against ROP attacks. Seceretmem makes
"simple" ROP insufficient to perform exfiltration, which increases the
required complexity of the attack. Along with other protections like
the kernel stack size limit and address space layout randomization which
make finding gadgets is really hard, absence of any in-kernel primitive
for accessing secret memory means the one gadget ROP attack can't work.
Since the only way to access secret memory is to reconstruct the missing
mapping entry, the attacker has to recover the physical page and insert
a PTE pointing to it in the kernel and then retrieve the contents. That
takes at least three gadgets which is a level of difficulty beyond most
standard attacks.
* Prevent cross-process secret userspace memory exposures. Once the
secret memory is allocated, the user can't accidentally pass it into the
kernel to be transmitted somewhere. The secreremem pages cannot be
accessed via the direct map and they are disallowed in GUP.
* Harden against exploited kernel flaws. In order to access secretmem,
a kernel-side attack would need to either walk the page tables and
create new ones, or spawn a new privileged uiserspace process to perform
secrets exfiltration using ptrace.
In the future the secret mappings may be used as a mean to protect guest
memory in a virtual machine host.
For demonstration of secret memory usage we've created a userspace library
https://git.kernel.org/pub/scm/linux/kernel/git/jejb/secret-memory-preloader.git
that does two things: the first is act as a preloader for openssl to
redirect all the OPENSSL_malloc calls to secret memory meaning any secret
keys get automatically protected this way and the other thing it does is
expose the API to the user who needs it. We anticipate that a lot of the
use cases would be like the openssl one: many toolkits that deal with
secret keys already have special handling for the memory to try to give
them greater protection, so this would simply be pluggable into the
toolkits without any need for user application modification.
Hiding secret memory mappings behind an anonymous file allows usage of the
page cache for tracking pages allocated for the "secret" mappings as well
as using address_space_operations for e.g. page migration callbacks.
The anonymous file may be also used implicitly, like hugetlb files, to
implement mmap(MAP_SECRET) and use the secret memory areas with "native"
mm ABIs in the future.
Removing of the pages from the direct map may cause its fragmentation on
architectures that use large pages to map the physical memory which
affects the system performance. However, the original Kconfig text for
CONFIG_DIRECT_GBPAGES said that gigabyte pages in the direct map "... can
improve the kernel's performance a tiny bit ..." (commit
|
||
Mel Gorman
|
ffd8f251f1 |
mm/page_alloc: move prototype for find_suitable_fallback
make W=1 generates the following warning in mmap_lock.c for allnoconfig
mm/page_alloc.c:2670:5: warning: no previous prototype for `find_suitable_fallback' [-Wmissing-prototypes]
int find_suitable_fallback(struct free_area *area, unsigned int order,
^~~~~~~~~~~~~~~~~~~~~~
find_suitable_fallback is only shared outside of page_alloc.c for
CONFIG_COMPACTION but to suppress the warning, move the protype outside of
CONFIG_COMPACTION. It is not worth the effort at this time to find a
clever way of allowing compaction.c to share the code or avoid the use
entirely as the function is called on relatively slow paths.
Link: https://lkml.kernel.org/r/20210520084809.8576-14-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
David Hildenbrand
|
4ca9b3859d |
mm/madvise: introduce MADV_POPULATE_(READ|WRITE) to prefault page tables
I. Background: Sparse Memory Mappings When we manage sparse memory mappings dynamically in user space - also sometimes involving MAP_NORESERVE - we want to dynamically populate/ discard memory inside such a sparse memory region. Example users are hypervisors (especially implementing memory ballooning or similar technologies like virtio-mem) and memory allocators. In addition, we want to fail in a nice way (instead of generating SIGBUS) if populating does not succeed because we are out of backend memory (which can happen easily with file-based mappings, especially tmpfs and hugetlbfs). While MADV_DONTNEED, MADV_REMOVE and FALLOC_FL_PUNCH_HOLE allow for reliably discarding memory for most mapping types, there is no generic approach to populate page tables and preallocate memory. Although mmap() supports MAP_POPULATE, it is not applicable to the concept of sparse memory mappings, where we want to populate/discard dynamically and avoid expensive/problematic remappings. In addition, we never actually report errors during the final populate phase - it is best-effort only. fallocate() can be used to preallocate file-based memory and fail in a safe way. However, it cannot really be used for any private mappings on anonymous files via memfd due to COW semantics. In addition, fallocate() does not actually populate page tables, so we still always get pagefaults on first access - which is sometimes undesired (i.e., real-time workloads) and requires real prefaulting of page tables, not just a preallocation of backend storage. There might be interesting use cases for sparse memory regions along with mlockall(MCL_ONFAULT) which fallocate() cannot satisfy as it does not prefault page tables. II. On preallcoation/prefaulting from user space Because we don't have a proper interface, what applications (like QEMU and databases) end up doing is touching (i.e., reading+writing one byte to not overwrite existing data) all individual pages. However, that approach 1) Can result in wear on storage backing, because we end up reading/writing each page; this is especially a problem for dax/pmem. 2) Can result in mmap_sem contention when prefaulting via multiple threads. 3) Requires expensive signal handling, especially to catch SIGBUS in case of hugetlbfs/shmem/file-backed memory. For example, this is problematic in hypervisors like QEMU where SIGBUS handlers might already be used by other subsystems concurrently to e.g, handle hardware errors. "Simply" doing preallocation concurrently from other thread is not that easy. III. On MADV_WILLNEED Extending MADV_WILLNEED is not an option because 1. It would change the semantics: "Expect access in the near future." and "might be a good idea to read some pages" vs. "Definitely populate/ preallocate all memory and definitely fail on errors.". 2. Existing users (like virtio-balloon in QEMU when deflating the balloon) don't want populate/prealloc semantics. They treat this rather as a hint to give a little performance boost without too much overhead - and don't expect that a lot of memory might get consumed or a lot of time might be spent. IV. MADV_POPULATE_READ and MADV_POPULATE_WRITE Let's introduce MADV_POPULATE_READ and MADV_POPULATE_WRITE, inspired by MAP_POPULATE, with the following semantics: 1. MADV_POPULATE_READ can be used to prefault page tables just like manually reading each individual page. This will not break any COW mappings. The shared zero page might get mapped and no backend storage might get preallocated -- allocation might be deferred to write-fault time. Especially shared file mappings require an explicit fallocate() upfront to actually preallocate backend memory (blocks in the file system) in case the file might have holes. 2. If MADV_POPULATE_READ succeeds, all page tables have been populated (prefaulted) readable once. 3. MADV_POPULATE_WRITE can be used to preallocate backend memory and prefault page tables just like manually writing (or reading+writing) each individual page. This will break any COW mappings -- e.g., the shared zeropage is never populated. 4. If MADV_POPULATE_WRITE succeeds, all page tables have been populated (prefaulted) writable once. 5. MADV_POPULATE_READ and MADV_POPULATE_WRITE cannot be applied to special mappings marked with VM_PFNMAP and VM_IO. Also, proper access permissions (e.g., PROT_READ, PROT_WRITE) are required. If any such mapping is encountered, madvise() fails with -EINVAL. 6. If MADV_POPULATE_READ or MADV_POPULATE_WRITE fails, some page tables might have been populated. 7. MADV_POPULATE_READ and MADV_POPULATE_WRITE will return -EHWPOISON when encountering a HW poisoned page in the range. 8. Similar to MAP_POPULATE, MADV_POPULATE_READ and MADV_POPULATE_WRITE cannot protect from the OOM (Out Of Memory) handler killing the process. While the use case for MADV_POPULATE_WRITE is fairly obvious (i.e., preallocate memory and prefault page tables for VMs), one issue is that whenever we prefault pages writable, the pages have to be marked dirty, because the CPU could dirty them any time. while not a real problem for hugetlbfs or dax/pmem, it can be a problem for shared file mappings: each page will be marked dirty and has to be written back later when evicting. MADV_POPULATE_READ allows for optimizing this scenario: Pre-read a whole mapping from backend storage without marking it dirty, such that eviction won't have to write it back. As discussed above, shared file mappings might require an explciit fallocate() upfront to achieve preallcoation+prepopulation. Although sparse memory mappings are the primary use case, this will also be useful for other preallocate/prefault use cases where MAP_POPULATE is not desired or the semantics of MAP_POPULATE are not sufficient: as one example, QEMU users can trigger preallocation/prefaulting of guest RAM after the mapping was created -- and don't want errors to be silently suppressed. Looking at the history, MADV_POPULATE was already proposed in 2013 [1], however, the main motivation back than was performance improvements -- which should also still be the case. V. Single-threaded performance comparison I did a short experiment, prefaulting page tables on completely *empty mappings/files* and repeated the experiment 10 times. The results correspond to the shortest execution time. In general, the performance benefit for huge pages is negligible with small mappings. V.1: Private mappings POPULATE_READ and POPULATE_WRITE is fastest. Note that Reading/POPULATE_READ will populate the shared zeropage where applicable -- which result in short population times. The fastest way to allocate backend storage (here: swap or huge pages) and prefault page tables is POPULATE_WRITE. V.2: Shared mappings fallocate() is fastest, however, doesn't prefault page tables. POPULATE_WRITE is faster than simple writes and read/writes. POPULATE_READ is faster than simple reads. Without a fd, the fastest way to allocate backend storage and prefault page tables is POPULATE_WRITE. With an fd, the fastest way is usually FALLOCATE+POPULATE_READ or FALLOCATE+POPULATE_WRITE respectively; one exception are actual files: FALLOCATE+Read is slightly faster than FALLOCATE+POPULATE_READ. The fastest way to allocate backend storage prefault page tables is FALLOCATE+POPULATE_WRITE -- except when dealing with actual files; then, FALLOCATE+POPULATE_READ is fastest and won't directly mark all pages as dirty. v.3: Detailed results ================================================== 2 MiB MAP_PRIVATE: ************************************************** Anon 4 KiB : Read : 0.119 ms Anon 4 KiB : Write : 0.222 ms Anon 4 KiB : Read/Write : 0.380 ms Anon 4 KiB : POPULATE_READ : 0.060 ms Anon 4 KiB : POPULATE_WRITE : 0.158 ms Memfd 4 KiB : Read : 0.034 ms Memfd 4 KiB : Write : 0.310 ms Memfd 4 KiB : Read/Write : 0.362 ms Memfd 4 KiB : POPULATE_READ : 0.039 ms Memfd 4 KiB : POPULATE_WRITE : 0.229 ms Memfd 2 MiB : Read : 0.030 ms Memfd 2 MiB : Write : 0.030 ms Memfd 2 MiB : Read/Write : 0.030 ms Memfd 2 MiB : POPULATE_READ : 0.030 ms Memfd 2 MiB : POPULATE_WRITE : 0.030 ms tmpfs : Read : 0.033 ms tmpfs : Write : 0.313 ms tmpfs : Read/Write : 0.406 ms tmpfs : POPULATE_READ : 0.039 ms tmpfs : POPULATE_WRITE : 0.285 ms file : Read : 0.033 ms file : Write : 0.351 ms file : Read/Write : 0.408 ms file : POPULATE_READ : 0.039 ms file : POPULATE_WRITE : 0.290 ms hugetlbfs : Read : 0.030 ms hugetlbfs : Write : 0.030 ms hugetlbfs : Read/Write : 0.030 ms hugetlbfs : POPULATE_READ : 0.030 ms hugetlbfs : POPULATE_WRITE : 0.030 ms ************************************************** 4096 MiB MAP_PRIVATE: ************************************************** Anon 4 KiB : Read : 237.940 ms Anon 4 KiB : Write : 708.409 ms Anon 4 KiB : Read/Write : 1054.041 ms Anon 4 KiB : POPULATE_READ : 124.310 ms Anon 4 KiB : POPULATE_WRITE : 572.582 ms Memfd 4 KiB : Read : 136.928 ms Memfd 4 KiB : Write : 963.898 ms Memfd 4 KiB : Read/Write : 1106.561 ms Memfd 4 KiB : POPULATE_READ : 78.450 ms Memfd 4 KiB : POPULATE_WRITE : 805.881 ms Memfd 2 MiB : Read : 357.116 ms Memfd 2 MiB : Write : 357.210 ms Memfd 2 MiB : Read/Write : 357.606 ms Memfd 2 MiB : POPULATE_READ : 356.094 ms Memfd 2 MiB : POPULATE_WRITE : 356.937 ms tmpfs : Read : 137.536 ms tmpfs : Write : 954.362 ms tmpfs : Read/Write : 1105.954 ms tmpfs : POPULATE_READ : 80.289 ms tmpfs : POPULATE_WRITE : 822.826 ms file : Read : 137.874 ms file : Write : 987.025 ms file : Read/Write : 1107.439 ms file : POPULATE_READ : 80.413 ms file : POPULATE_WRITE : 857.622 ms hugetlbfs : Read : 355.607 ms hugetlbfs : Write : 355.729 ms hugetlbfs : Read/Write : 356.127 ms hugetlbfs : POPULATE_READ : 354.585 ms hugetlbfs : POPULATE_WRITE : 355.138 ms ************************************************** 2 MiB MAP_SHARED: ************************************************** Anon 4 KiB : Read : 0.394 ms Anon 4 KiB : Write : 0.348 ms Anon 4 KiB : Read/Write : 0.400 ms Anon 4 KiB : POPULATE_READ : 0.326 ms Anon 4 KiB : POPULATE_WRITE : 0.273 ms Anon 2 MiB : Read : 0.030 ms Anon 2 MiB : Write : 0.030 ms Anon 2 MiB : Read/Write : 0.030 ms Anon 2 MiB : POPULATE_READ : 0.030 ms Anon 2 MiB : POPULATE_WRITE : 0.030 ms Memfd 4 KiB : Read : 0.412 ms Memfd 4 KiB : Write : 0.372 ms Memfd 4 KiB : Read/Write : 0.419 ms Memfd 4 KiB : POPULATE_READ : 0.343 ms Memfd 4 KiB : POPULATE_WRITE : 0.288 ms Memfd 4 KiB : FALLOCATE : 0.137 ms Memfd 4 KiB : FALLOCATE+Read : 0.446 ms Memfd 4 KiB : FALLOCATE+Write : 0.330 ms Memfd 4 KiB : FALLOCATE+Read/Write : 0.454 ms Memfd 4 KiB : FALLOCATE+POPULATE_READ : 0.379 ms Memfd 4 KiB : FALLOCATE+POPULATE_WRITE : 0.268 ms Memfd 2 MiB : Read : 0.030 ms Memfd 2 MiB : Write : 0.030 ms Memfd 2 MiB : Read/Write : 0.030 ms Memfd 2 MiB : POPULATE_READ : 0.030 ms Memfd 2 MiB : POPULATE_WRITE : 0.030 ms Memfd 2 MiB : FALLOCATE : 0.030 ms Memfd 2 MiB : FALLOCATE+Read : 0.031 ms Memfd 2 MiB : FALLOCATE+Write : 0.031 ms Memfd 2 MiB : FALLOCATE+Read/Write : 0.031 ms Memfd 2 MiB : FALLOCATE+POPULATE_READ : 0.030 ms Memfd 2 MiB : FALLOCATE+POPULATE_WRITE : 0.030 ms tmpfs : Read : 0.416 ms tmpfs : Write : 0.369 ms tmpfs : Read/Write : 0.425 ms tmpfs : POPULATE_READ : 0.346 ms tmpfs : POPULATE_WRITE : 0.295 ms tmpfs : FALLOCATE : 0.139 ms tmpfs : FALLOCATE+Read : 0.447 ms tmpfs : FALLOCATE+Write : 0.333 ms tmpfs : FALLOCATE+Read/Write : 0.454 ms tmpfs : FALLOCATE+POPULATE_READ : 0.380 ms tmpfs : FALLOCATE+POPULATE_WRITE : 0.272 ms file : Read : 0.191 ms file : Write : 0.511 ms file : Read/Write : 0.524 ms file : POPULATE_READ : 0.196 ms file : POPULATE_WRITE : 0.434 ms file : FALLOCATE : 0.004 ms file : FALLOCATE+Read : 0.197 ms file : FALLOCATE+Write : 0.554 ms file : FALLOCATE+Read/Write : 0.480 ms file : FALLOCATE+POPULATE_READ : 0.201 ms file : FALLOCATE+POPULATE_WRITE : 0.381 ms hugetlbfs : Read : 0.030 ms hugetlbfs : Write : 0.030 ms hugetlbfs : Read/Write : 0.030 ms hugetlbfs : POPULATE_READ : 0.030 ms hugetlbfs : POPULATE_WRITE : 0.030 ms hugetlbfs : FALLOCATE : 0.030 ms hugetlbfs : FALLOCATE+Read : 0.031 ms hugetlbfs : FALLOCATE+Write : 0.031 ms hugetlbfs : FALLOCATE+Read/Write : 0.030 ms hugetlbfs : FALLOCATE+POPULATE_READ : 0.030 ms hugetlbfs : FALLOCATE+POPULATE_WRITE : 0.030 ms ************************************************** 4096 MiB MAP_SHARED: ************************************************** Anon 4 KiB : Read : 1053.090 ms Anon 4 KiB : Write : 913.642 ms Anon 4 KiB : Read/Write : 1060.350 ms Anon 4 KiB : POPULATE_READ : 893.691 ms Anon 4 KiB : POPULATE_WRITE : 782.885 ms Anon 2 MiB : Read : 358.553 ms Anon 2 MiB : Write : 358.419 ms Anon 2 MiB : Read/Write : 357.992 ms Anon 2 MiB : POPULATE_READ : 357.533 ms Anon 2 MiB : POPULATE_WRITE : 357.808 ms Memfd 4 KiB : Read : 1078.144 ms Memfd 4 KiB : Write : 942.036 ms Memfd 4 KiB : Read/Write : 1100.391 ms Memfd 4 KiB : POPULATE_READ : 925.829 ms Memfd 4 KiB : POPULATE_WRITE : 804.394 ms Memfd 4 KiB : FALLOCATE : 304.632 ms Memfd 4 KiB : FALLOCATE+Read : 1163.359 ms Memfd 4 KiB : FALLOCATE+Write : 933.186 ms Memfd 4 KiB : FALLOCATE+Read/Write : 1187.304 ms Memfd 4 KiB : FALLOCATE+POPULATE_READ : 1013.660 ms Memfd 4 KiB : FALLOCATE+POPULATE_WRITE : 794.560 ms Memfd 2 MiB : Read : 358.131 ms Memfd 2 MiB : Write : 358.099 ms Memfd 2 MiB : Read/Write : 358.250 ms Memfd 2 MiB : POPULATE_READ : 357.563 ms Memfd 2 MiB : POPULATE_WRITE : 357.334 ms Memfd 2 MiB : FALLOCATE : 356.735 ms Memfd 2 MiB : FALLOCATE+Read : 358.152 ms Memfd 2 MiB : FALLOCATE+Write : 358.331 ms Memfd 2 MiB : FALLOCATE+Read/Write : 358.018 ms Memfd 2 MiB : FALLOCATE+POPULATE_READ : 357.286 ms Memfd 2 MiB : FALLOCATE+POPULATE_WRITE : 357.523 ms tmpfs : Read : 1087.265 ms tmpfs : Write : 950.840 ms tmpfs : Read/Write : 1107.567 ms tmpfs : POPULATE_READ : 922.605 ms tmpfs : POPULATE_WRITE : 810.094 ms tmpfs : FALLOCATE : 306.320 ms tmpfs : FALLOCATE+Read : 1169.796 ms tmpfs : FALLOCATE+Write : 933.730 ms tmpfs : FALLOCATE+Read/Write : 1191.610 ms tmpfs : FALLOCATE+POPULATE_READ : 1020.474 ms tmpfs : FALLOCATE+POPULATE_WRITE : 798.945 ms file : Read : 654.101 ms file : Write : 1259.142 ms file : Read/Write : 1289.509 ms file : POPULATE_READ : 661.642 ms file : POPULATE_WRITE : 1106.816 ms file : FALLOCATE : 1.864 ms file : FALLOCATE+Read : 656.328 ms file : FALLOCATE+Write : 1153.300 ms file : FALLOCATE+Read/Write : 1180.613 ms file : FALLOCATE+POPULATE_READ : 668.347 ms file : FALLOCATE+POPULATE_WRITE : 996.143 ms hugetlbfs : Read : 357.245 ms hugetlbfs : Write : 357.413 ms hugetlbfs : Read/Write : 357.120 ms hugetlbfs : POPULATE_READ : 356.321 ms hugetlbfs : POPULATE_WRITE : 356.693 ms hugetlbfs : FALLOCATE : 355.927 ms hugetlbfs : FALLOCATE+Read : 357.074 ms hugetlbfs : FALLOCATE+Write : 357.120 ms hugetlbfs : FALLOCATE+Read/Write : 356.983 ms hugetlbfs : FALLOCATE+POPULATE_READ : 356.413 ms hugetlbfs : FALLOCATE+POPULATE_WRITE : 356.266 ms ************************************************** [1] https://lkml.org/lkml/2013/6/27/698 [akpm@linux-foundation.org: coding style fixes] Link: https://lkml.kernel.org/r/20210419135443.12822-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Helge Deller <deller@gmx.de> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rolf Eike Beer <eike-kernel@sf-tec.de> Cc: Ram Pai <linuxram@us.ibm.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
David Hildenbrand
|
a78f1ccd37 |
mm: make variable names for populate_vma_page_range() consistent
Patch series "mm/madvise: introduce MADV_POPULATE_(READ|WRITE) to prefault page tables", v2. Excessive details on MADV_POPULATE_(READ|WRITE) can be found in patch #2. This patch (of 5): Let's make the variable names in the function declaration match the variable names used in the definition. Link: https://lkml.kernel.org/r/20210419135443.12822-1-david@redhat.com Link: https://lkml.kernel.org/r/20210419135443.12822-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Michal Hocko <mhocko@suse.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Peter Xu <peterx@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Chris Zankel <chris@zankel.net> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Helge Deller <deller@gmx.de> Cc: Hugh Dickins <hughd@google.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Jann Horn <jannh@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Ram Pai <linuxram@us.ibm.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Rik van Riel <riel@surriel.com> Cc: Rolf Eike Beer <eike-kernel@sf-tec.de> Cc: Shuah Khan <shuah@kernel.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Yang Shi
|
c5b5a3dd2c |
mm: thp: refactor NUMA fault handling
When the THP NUMA fault support was added THP migration was not supported yet. So the ad hoc THP migration was implemented in NUMA fault handling. Since v4.14 THP migration has been supported so it doesn't make too much sense to still keep another THP migration implementation rather than using the generic migration code. This patch reworks the NUMA fault handling to use generic migration implementation to migrate misplaced page. There is no functional change. After the refactor the flow of NUMA fault handling looks just like its PTE counterpart: Acquire ptl Prepare for migration (elevate page refcount) Release ptl Isolate page from lru and elevate page refcount Migrate the misplaced THP If migration fails just restore the old normal PMD. In the old code anon_vma lock was needed to serialize THP migration against THP split, but since then the THP code has been reworked a lot, it seems anon_vma lock is not required anymore to avoid the race. The page refcount elevation when holding ptl should prevent from THP split. Use migrate_misplaced_page() for both base page and THP NUMA hinting fault and remove all the dead and duplicate code. [dan.carpenter@oracle.com: fix a double unlock bug] Link: https://lkml.kernel.org/r/YLX8uYN01JmfLnlK@mwanda Link: https://lkml.kernel.org/r/20210518200801.7413-4-shy828301@gmail.com Signed-off-by: Yang Shi <shy828301@gmail.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Yang Shi
|
f4c0d8367e |
mm: memory: make numa_migrate_prep() non-static
The numa_migrate_prep() will be used by huge NUMA fault as well in the following patch, make it non-static. Link: https://lkml.kernel.org/r/20210518200801.7413-3-shy828301@gmail.com Signed-off-by: Yang Shi <shy828301@gmail.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Mel Gorman
|
44042b4498 |
mm/page_alloc: allow high-order pages to be stored on the per-cpu lists
The per-cpu page allocator (PCP) only stores order-0 pages. This means
that all THP and "cheap" high-order allocations including SLUB contends on
the zone->lock. This patch extends the PCP allocator to store THP and
"cheap" high-order pages. Note that struct per_cpu_pages increases in
size to 256 bytes (4 cache lines) on x86-64.
Note that this is not necessarily a universal performance win because of
how it is implemented. High-order pages can cause pcp->high to be
exceeded prematurely for lower-orders so for example, a large number of
THP pages being freed could release order-0 pages from the PCP lists.
Hence, much depends on the allocation/free pattern as observed by a single
CPU to determine if caching helps or hurts a particular workload.
That said, basic performance testing passed. The following is a netperf
UDP_STREAM test which hits the relevant patches as some of the network
allocations are high-order.
netperf-udp
5.13.0-rc2 5.13.0-rc2
mm-pcpburst-v3r4 mm-pcphighorder-v1r7
Hmean send-64 261.46 ( 0.00%) 266.30 * 1.85%*
Hmean send-128 516.35 ( 0.00%) 536.78 * 3.96%*
Hmean send-256 1014.13 ( 0.00%) 1034.63 * 2.02%*
Hmean send-1024 3907.65 ( 0.00%) 4046.11 * 3.54%*
Hmean send-2048 7492.93 ( 0.00%) 7754.85 * 3.50%*
Hmean send-3312 11410.04 ( 0.00%) 11772.32 * 3.18%*
Hmean send-4096 13521.95 ( 0.00%) 13912.34 * 2.89%*
Hmean send-8192 21660.50 ( 0.00%) 22730.72 * 4.94%*
Hmean send-16384 31902.32 ( 0.00%) 32637.50 * 2.30%*
Functionally, a patch like this is necessary to make bulk allocation of
high-order pages work with similar performance to order-0 bulk
allocations. The bulk allocator is not updated in this series as it would
have to be determined by bulk allocation users how they want to track the
order of pages allocated with the bulk allocator.
Link: https://lkml.kernel.org/r/20210611135753.GC30378@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Mel Gorman
|
04f8cfeaed |
mm/page_alloc: adjust pcp->high after CPU hotplug events
The PCP high watermark is based on the number of online CPUs so the
watermarks must be adjusted during CPU hotplug. At the time of
hot-remove, the number of online CPUs is already adjusted but during
hot-add, a delta needs to be applied to update PCP to the correct value.
After this patch is applied, the high watermarks are adjusted correctly.
# grep high: /proc/zoneinfo | tail -1
high: 649
# echo 0 > /sys/devices/system/cpu/cpu4/online
# grep high: /proc/zoneinfo | tail -1
high: 664
# echo 1 > /sys/devices/system/cpu/cpu4/online
# grep high: /proc/zoneinfo | tail -1
high: 649
Link: https://lkml.kernel.org/r/20210525080119.5455-4-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
Waiman Long
|
494c1dfe85 |
mm: memcg/slab: create a new set of kmalloc-cg-<n> caches
There are currently two problems in the way the objcg pointer array (memcg_data) in the page structure is being allocated and freed. On its allocation, it is possible that the allocated objcg pointer array comes from the same slab that requires memory accounting. If this happens, the slab will never become empty again as there is at least one object left (the obj_cgroup array) in the slab. When it is freed, the objcg pointer array object may be the last one in its slab and hence causes kfree() to be called again. With the right workload, the slab cache may be set up in a way that allows the recursive kfree() calling loop to nest deep enough to cause a kernel stack overflow and panic the system. One way to solve this problem is to split the kmalloc-<n> caches (KMALLOC_NORMAL) into two separate sets - a new set of kmalloc-<n> (KMALLOC_NORMAL) caches for unaccounted objects only and a new set of kmalloc-cg-<n> (KMALLOC_CGROUP) caches for accounted objects only. All the other caches can still allow a mix of accounted and unaccounted objects. With this change, all the objcg pointer array objects will come from KMALLOC_NORMAL caches which won't have their objcg pointer arrays. So both the recursive kfree() problem and non-freeable slab problem are gone. Since both the KMALLOC_NORMAL and KMALLOC_CGROUP caches no longer have mixed accounted and unaccounted objects, this will slightly reduce the number of objcg pointer arrays that need to be allocated and save a bit of memory. On the other hand, creating a new set of kmalloc caches does have the effect of reducing cache utilization. So it is properly a wash. The new KMALLOC_CGROUP is added between KMALLOC_NORMAL and KMALLOC_RECLAIM so that the first for loop in create_kmalloc_caches() will include the newly added caches without change. [vbabka@suse.cz: don't create kmalloc-cg caches with cgroup.memory=nokmem] Link: https://lkml.kernel.org/r/20210512145107.6208-1-longman@redhat.com [akpm@linux-foundation.org: un-fat-finger v5 delta creation] [longman@redhat.com: disable cache merging for KMALLOC_NORMAL caches] Link: https://lkml.kernel.org/r/20210505200610.13943-4-longman@redhat.com Link: https://lkml.kernel.org/r/20210512145107.6208-1-longman@redhat.com Link: https://lkml.kernel.org/r/20210505200610.13943-3-longman@redhat.com Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Suggested-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Roman Gushchin <guro@fb.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> [longman@redhat.com: fix for CONFIG_ZONE_DMA=n] Suggested-by: Roman Gushchin <guro@fb.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Hugh Dickins
|
494334e43c |
mm/thp: fix vma_address() if virtual address below file offset
Running certain tests with a DEBUG_VM kernel would crash within hours, on the total_mapcount BUG() in split_huge_page_to_list(), while trying to free up some memory by punching a hole in a shmem huge page: split's try_to_unmap() was unable to find all the mappings of the page (which, on a !DEBUG_VM kernel, would then keep the huge page pinned in memory). When that BUG() was changed to a WARN(), it would later crash on the VM_BUG_ON_VMA(end < vma->vm_start || start >= vma->vm_end, vma) in mm/internal.h:vma_address(), used by rmap_walk_file() for try_to_unmap(). vma_address() is usually correct, but there's a wraparound case when the vm_start address is unusually low, but vm_pgoff not so low: vma_address() chooses max(start, vma->vm_start), but that decides on the wrong address, because start has become almost ULONG_MAX. Rewrite vma_address() to be more careful about vm_pgoff; move the VM_BUG_ON_VMA() out of it, returning -EFAULT for errors, so that it can be safely used from page_mapped_in_vma() and page_address_in_vma() too. Add vma_address_end() to apply similar care to end address calculation, in page_vma_mapped_walk() and page_mkclean_one() and try_to_unmap_one(); though it raises a question of whether callers would do better to supply pvmw->end to page_vma_mapped_walk() - I chose not, for a smaller patch. An irritation is that their apparent generality breaks down on KSM pages, which cannot be located by the page->index that page_to_pgoff() uses: as commit |
||
Michal Hocko
|
f10628d2f6 |
Revert "mm/gup: check page posion status for coredump."
While reviewing [1] I came across commit |
||
Ingo Molnar
|
f0953a1bba |
mm: fix typos in comments
Fix ~94 single-word typos in locking code comments, plus a few very obvious grammar mistakes. Link: https://lkml.kernel.org/r/20210322212624.GA1963421@gmail.com Link: https://lore.kernel.org/r/20210322205203.GB1959563@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Cc: Bhaskar Chowdhury <unixbhaskar@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Oscar Salvador
|
c2ad7a1ffe |
mm,compaction: let isolate_migratepages_{range,block} return error codes
Currently, isolate_migratepages_{range,block} and their callers use a pfn
== 0 vs pfn != 0 scheme to let the caller know whether there was any error
during isolation.
This does not work as soon as we need to start reporting different error
codes and make sure we pass them down the chain, so they are properly
interpreted by functions like e.g: alloc_contig_range.
Let us rework isolate_migratepages_{range,block} so we can report error
codes. Since isolate_migratepages_block will stop returning the next pfn
to be scanned, we reuse the cc->migrate_pfn field to keep track of that.
Link: https://lkml.kernel.org/r/20210419075413.1064-3-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
Matthew Wilcox (Oracle)
|
84172f4bb7 |
mm/page_alloc: combine __alloc_pages and __alloc_pages_nodemask
There are only two callers of __alloc_pages() so prune the thicket of alloc_page variants by combining the two functions together. Current callers of __alloc_pages() simply add an extra 'NULL' parameter and current callers of __alloc_pages_nodemask() call __alloc_pages() instead. Link: https://lkml.kernel.org/r/20210225150642.2582252-4-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Nicholas Piggin
|
4ad0ae8c64 |
mm/vmalloc: remove unmap_kernel_range
This is a shim around vunmap_range, get rid of it. Move the main API comment from the _noflush variant to the normal variant, and make _noflush internal to mm/. [npiggin@gmail.com: fix nommu builds and a comment bug per sfr] Link: https://lkml.kernel.org/r/1617292598.m6g0knx24s.astroid@bobo.none [akpm@linux-foundation.org: move vunmap_range_noflush() stub inside !CONFIG_MMU, not !CONFIG_NUMA] [npiggin@gmail.com: fix nommu builds] Link: https://lkml.kernel.org/r/1617292497.o1uhq5ipxp.astroid@bobo.none Link: https://lkml.kernel.org/r/20210322021806.892164-5-npiggin@gmail.com Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Cédric Le Goater <clg@kaod.org> Cc: Uladzislau Rezki <urezki@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Nicholas Piggin
|
b67177ecd9 |
mm/vmalloc: remove map_kernel_range
Patch series "mm/vmalloc: cleanup after hugepage series", v2. Christoph pointed out some overdue cleanups required after the huge vmalloc series, and I had another failure error message improvement as well. This patch (of 5): This is a shim around vmap_pages_range, get rid of it. Move the main API comment from the _noflush variant to the normal variant, and make _noflush internal to mm/. Link: https://lkml.kernel.org/r/20210322021806.892164-1-npiggin@gmail.com Link: https://lkml.kernel.org/r/20210322021806.892164-2-npiggin@gmail.com Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Uladzislau Rezki <urezki@gmail.com> Cc: Cédric Le Goater <clg@kaod.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Linus Torvalds
|
820c4bae40 |
Network filesystem helper library
-----BEGIN PGP SIGNATURE-----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=tZgy
-----END PGP SIGNATURE-----
Merge tag 'netfs-lib-20210426' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull network filesystem helper library updates from David Howells:
"Here's a set of patches for 5.13 to begin the process of overhauling
the local caching API for network filesystems. This set consists of
two parts:
(1) Add a helper library to handle the new VM readahead interface.
This is intended to be used unconditionally by the filesystem
(whether or not caching is enabled) and provides a common
framework for doing caching, transparent huge pages and, in the
future, possibly fscrypt and read bandwidth maximisation. It also
allows the netfs and the cache to align, expand and slice up a
read request from the VM in various ways; the netfs need only
provide a function to read a stretch of data to the pagecache and
the helper takes care of the rest.
(2) Add an alternative fscache/cachfiles I/O API that uses the kiocb
facility to do async DIO to transfer data to/from the netfs's
pages, rather than using readpage with wait queue snooping on one
side and vfs_write() on the other. It also uses less memory, since
it doesn't do buffered I/O on the backing file.
Note that this uses SEEK_HOLE/SEEK_DATA to locate the data
available to be read from the cache. Whilst this is an improvement
from the bmap interface, it still has a problem with regard to a
modern extent-based filesystem inserting or removing bridging
blocks of zeros. Fixing that requires a much greater overhaul.
This is a step towards overhauling the fscache API. The change is
opt-in on the part of the network filesystem. A netfs should not try
to mix the old and the new API because of conflicting ways of handling
pages and the PG_fscache page flag and because it would be mixing DIO
with buffered I/O. Further, the helper library can't be used with the
old API.
This does not change any of the fscache cookie handling APIs or the
way invalidation is done at this time.
In the near term, I intend to deprecate and remove the old I/O API
(fscache_allocate_page{,s}(), fscache_read_or_alloc_page{,s}(),
fscache_write_page() and fscache_uncache_page()) and eventually
replace most of fscache/cachefiles with something simpler and easier
to follow.
This patchset contains the following parts:
- Some helper patches, including provision of an ITER_XARRAY iov
iterator and a function to do readahead expansion.
- Patches to add the netfs helper library.
- A patch to add the fscache/cachefiles kiocb API.
- A pair of patches to fix some review issues in the ITER_XARRAY and
read helpers as spotted by Al and Willy.
Jeff Layton has patches to add support in Ceph for this that he
intends for this merge window. I have a set of patches to support AFS
that I will post a separate pull request for.
With this, AFS without a cache passes all expected xfstests; with a
cache, there's an extra failure, but that's also there before these
patches. Fixing that probably requires a greater overhaul. Ceph also
passes the expected tests.
I also have patches in a separate branch to tidy up the handling of
PG_fscache/PG_private_2 and their contribution to page refcounting in
the core kernel here, but I haven't included them in this set and will
route them separately"
Link: https://lore.kernel.org/lkml/3779937.1619478404@warthog.procyon.org.uk/
* tag 'netfs-lib-20210426' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
netfs: Miscellaneous fixes
iov_iter: Four fixes for ITER_XARRAY
fscache, cachefiles: Add alternate API to use kiocb for read/write to cache
netfs: Add a tracepoint to log failures that would be otherwise unseen
netfs: Define an interface to talk to a cache
netfs: Add write_begin helper
netfs: Gather stats
netfs: Add tracepoints
netfs: Provide readahead and readpage netfs helpers
netfs, mm: Add set/end/wait_on_page_fscache() aliases
netfs, mm: Move PG_fscache helper funcs to linux/netfs.h
netfs: Documentation for helper library
netfs: Make a netfs helper module
mm: Implement readahead_control pageset expansion
mm/readahead: Handle ractl nr_pages being modified
fs: Document file_ra_state
mm/filemap: Pass the file_ra_state in the ractl
mm: Add set/end/wait functions for PG_private_2
iov_iter: Add ITER_XARRAY
|
||
|
Matthew Wilcox (Oracle)
|
fcd9ae4f7f |
mm/filemap: Pass the file_ra_state in the ractl
For readahead_expand(), we need to modify the file ra_state, so pass it down by adding it to the ractl. We have to do this because it's not always the same as f_ra in the struct file that is already being passed. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dave Wysochanski <dwysocha@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> Link: https://lore.kernel.org/r/20210407201857.3582797-2-willy@infradead.org/ Link: https://lore.kernel.org/r/161789067431.6155.8063840447229665720.stgit@warthog.procyon.org.uk/ # v6 |
||
Aili Yao
|
d3378e86d1 |
mm/gup: check page posion status for coredump.
When we do coredump for user process signal, this may be an SIGBUS signal with BUS_MCEERR_AR or BUS_MCEERR_AO code, which means this signal is resulted from ECC memory fail like SRAR or SRAO, we expect the memory recovery work is finished correctly, then the get_dump_page() will not return the error page as its process pte is set invalid by memory_failure(). But memory_failure() may fail, and the process's related pte may not be correctly set invalid, for current code, we will return the poison page, get it dumped, and then lead to system panic as its in kernel code. So check the poison status in get_dump_page(), and if TRUE, return NULL. There maybe other scenario that is also better to check the posion status and not to panic, so make a wrapper for this check, Thanks to David's suggestion(<david@redhat.com>). [akpm@linux-foundation.org: s/0/false/] [yaoaili@kingsoft.com: is_page_poisoned() arg cannot be null, per Matthew] Link: https://lkml.kernel.org/r/20210322115233.05e4e82a@alex-virtual-machine Link: https://lkml.kernel.org/r/20210319104437.6f30e80d@alex-virtual-machine Signed-off-by: Aili Yao <yaoaili@kingsoft.com> Cc: David Hildenbrand <david@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Aili Yao <yaoaili@kingsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Peter Xu
|
97a7e4733b |
mm: introduce page_needs_cow_for_dma() for deciding whether cow
We've got quite a few places (pte, pmd, pud) that explicitly checked against whether we should break the cow right now during fork(). It's easier to provide a helper, especially before we work the same thing on hugetlbfs. Since we'll reference is_cow_mapping() in mm.h, move it there too. Actually it suites mm.h more since internal.h is mm/ only, but mm.h is exported to the whole kernel. With that we should expect another patch to use is_cow_mapping() whenever we can across the kernel since we do use it quite a lot but it's always done with raw code against VM_* flags. Link: https://lkml.kernel.org/r/20210217233547.93892-4-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Jason Gunthorpe <jgg@ziepe.ca> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Gal Pressman <galpress@amazon.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Kirill Shutemov <kirill@shutemov.name> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Roland Scheidegger <sroland@vmware.com> Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: Wei Zhang <wzam@amazon.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Matthew Wilcox (Oracle)
|
5c211ba29d |
mm: add and use find_lock_entries
We have three functions (shmem_undo_range(), truncate_inode_pages_range() and invalidate_mapping_pages()) which want exactly this function, so add it to filemap.c. Before this patch, shmem_undo_range() would split any compound page which overlaps either end of the range being punched in both the first and second loops through the address space. After this patch, that functionality is left for the second loop, which is arguably more appropriate since the first loop is supposed to run through all the pages quickly, and splitting a page can sleep. [willy@infradead.org: add assertion] Link: https://lkml.kernel.org/r/20201124041507.28996-3-willy@infradead.org Link: https://lkml.kernel.org/r/20201112212641.27837-10-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Dave Chinner <dchinner@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Matthew Wilcox (Oracle)
|
44835d20b2 |
mm: add FGP_ENTRY
The functionality of find_lock_entry() and find_get_entry() can be provided by pagecache_get_page(), which lets us delete find_lock_entry() and make find_get_entry() static. Link: https://lkml.kernel.org/r/20201112212641.27837-5-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Dave Chinner <dchinner@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: William Kucharski <william.kucharski@oracle.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Vlastimil Babka
|
ec6e8c7e03 |
mm, page_alloc: disable pcplists during memory offline
Memory offlining relies on page isolation to guarantee a forward progress
because pages cannot be reused while they are isolated. But the page
isolation itself doesn't prevent from races while freed pages are stored
on pcp lists and thus can be reused. This can be worked around by
repeated draining of pcplists, as done by commit
|
||
|
Matthew Wilcox (Oracle)
|
0966aeb404 |
mm: move free_unref_page to mm/internal.h
Code outside mm/ should not be calling free_unref_page(). Also move free_unref_page_list(). Link: https://lkml.kernel.org/r/20201125034655.27687-2-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Matthew Wilcox (Oracle)
|
ab130f9108 |
mm: rename page_order() to buddy_order()
The current page_order() can only be called on pages in the buddy allocator. For compound pages, you have to use compound_order(). This is confusing and led to a bug, so rename page_order() to buddy_order(). Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.kernel.org/r/20201001152259.14932-2-willy@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
David Howells
|
b1647dc0de |
mm/readahead: pass a file_ra_state into force_page_cache_ra
The file_ra_state being passed into page_cache_sync_readahead() was being ignored in favour of using the one embedded in the struct file. The only caller for which this makes a difference is the fsverity code if the file has been marked as POSIX_FADV_RANDOM, but it's confusing and worth fixing. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Eric Biggers <ebiggers@google.com> Link: https://lkml.kernel.org/r/20200903140844.14194-10-willy@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
David Howells
|
db660d4625 |
mm/filemap: fold ra_submit into do_sync_mmap_readahead
Fold ra_submit() into its last remaining user and pass the readahead_control struct to both do_page_cache_ra() and page_cache_sync_ra(). Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Eric Biggers <ebiggers@google.com> Link: https://lkml.kernel.org/r/20200903140844.14194-9-willy@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
David Howells
|
7b3df3b9ac |
mm/readahead: pass readahead_control to force_page_cache_ra
Reimplement force_page_cache_readahead() as a wrapper around force_page_cache_ra(). Pass the existing readahead_control from page_cache_sync_readahead(). Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Eric Biggers <ebiggers@google.com> Link: https://lkml.kernel.org/r/20200903140844.14194-7-willy@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Matthew Wilcox (Oracle)
|
8238287ead |
mm/readahead: make do_page_cache_ra take a readahead_control
Rename __do_page_cache_readahead() to do_page_cache_ra() and call it directly from ondemand_readahead() instead of indirecting via ra_submit(). Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: David Howells <dhowells@redhat.com> Cc: Eric Biggers <ebiggers@google.com> Link: https://lkml.kernel.org/r/20200903140844.14194-5-willy@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Matthew Wilcox (Oracle)
|
9dfc8ff34b |
i915: use find_lock_page instead of find_lock_entry
i915 does not want to see value entries. Switch it to use find_lock_page() instead, and remove the export of find_lock_entry(). Move find_lock_entry() and find_get_entry() to mm/internal.h to discourage any future use. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: William Kucharski <william.kucharski@oracle.com> Link: https://lkml.kernel.org/r/20200910183318.20139-6-willy@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Matthew Wilcox (Oracle)
|
6c357848b4 |
mm: replace hpage_nr_pages with thp_nr_pages
The thp prefix is more frequently used than hpage and we should be consistent between the various functions. [akpm@linux-foundation.org: fix mm/migrate.c] Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: David Hildenbrand <david@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Link: http://lkml.kernel.org/r/20200629151959.15779-6-willy@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Matthew Wilcox (Oracle)
|
af3bbc12df |
mm: add thp_size
This function returns the number of bytes in a THP. It is like page_size(), but compiles to just PAGE_SIZE if CONFIG_TRANSPARENT_HUGEPAGE is disabled. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Cc: David Hildenbrand <david@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Link: http://lkml.kernel.org/r/20200629151959.15779-5-willy@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Joonsoo Kim
|
a097631160 |
mm/mempolicy: use a standard migration target allocation callback
There is a well-defined migration target allocation callback. Use it. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Christoph Hellwig <hch@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Roman Gushchin <guro@fb.com> Link: http://lkml.kernel.org/r/1594622517-20681-7-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Joonsoo Kim
|
19fc7bed25 |
mm/migrate: introduce a standard migration target allocation function
There are some similar functions for migration target allocation. Since there is no fundamental difference, it's better to keep just one rather than keeping all variants. This patch implements base migration target allocation function. In the following patches, variants will be converted to use this function. Changes should be mechanical, but, unfortunately, there are some differences. First, some callers' nodemask is assgined to NULL since NULL nodemask will be considered as all available nodes, that is, &node_states[N_MEMORY]. Second, for hugetlb page allocation, gfp_mask is redefined as regular hugetlb allocation gfp_mask plus __GFP_THISNODE if user provided gfp_mask has it. This is because future caller of this function requires to set this node constaint. Lastly, if provided nodeid is NUMA_NO_NODE, nodeid is set up to the node where migration source lives. It helps to remove simple wrappers for setting up the nodeid. Note that PageHighmem() call in previous function is changed to open-code "is_highmem_idx()" since it provides more readability. [akpm@linux-foundation.org: tweak patch title, per Vlastimil] [akpm@linux-foundation.org: fix typo in comment] Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Roman Gushchin <guro@fb.com> Link: http://lkml.kernel.org/r/1594622517-20681-6-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Nitin Gupta
|
facdaa917c |
mm: proactive compaction
For some applications, we need to allocate almost all memory as hugepages.
However, on a running system, higher-order allocations can fail if the
memory is fragmented. Linux kernel currently does on-demand compaction as
we request more hugepages, but this style of compaction incurs very high
latency. Experiments with one-time full memory compaction (followed by
hugepage allocations) show that kernel is able to restore a highly
fragmented memory state to a fairly compacted memory state within <1 sec
for a 32G system. Such data suggests that a more proactive compaction can
help us allocate a large fraction of memory as hugepages keeping
allocation latencies low.
For a more proactive compaction, the approach taken here is to define a
new sysctl called 'vm.compaction_proactiveness' which dictates bounds for
external fragmentation which kcompactd tries to maintain.
The tunable takes a value in range [0, 100], with a default of 20.
Note that a previous version of this patch [1] was found to introduce too
many tunables (per-order extfrag{low, high}), but this one reduces them to
just one sysctl. Also, the new tunable is an opaque value instead of
asking for specific bounds of "external fragmentation", which would have
been difficult to estimate. The internal interpretation of this opaque
value allows for future fine-tuning.
Currently, we use a simple translation from this tunable to [low, high]
"fragmentation score" thresholds (low=100-proactiveness, high=low+10%).
The score for a node is defined as weighted mean of per-zone external
fragmentation. A zone's present_pages determines its weight.
To periodically check per-node score, we reuse per-node kcompactd threads,
which are woken up every 500 milliseconds to check the same. If a node's
score exceeds its high threshold (as derived from user-provided
proactiveness value), proactive compaction is started until its score
reaches its low threshold value. By default, proactiveness is set to 20,
which implies threshold values of low=80 and high=90.
This patch is largely based on ideas from Michal Hocko [2]. See also the
LWN article [3].
Performance data
================
System: x64_64, 1T RAM, 80 CPU threads.
Kernel: 5.6.0-rc3 + this patch
echo madvise | sudo tee /sys/kernel/mm/transparent_hugepage/enabled
echo madvise | sudo tee /sys/kernel/mm/transparent_hugepage/defrag
Before starting the driver, the system was fragmented from a userspace
program that allocates all memory and then for each 2M aligned section,
frees 3/4 of base pages using munmap. The workload is mainly anonymous
userspace pages, which are easy to move around. I intentionally avoided
unmovable pages in this test to see how much latency we incur when
hugepage allocations hit direct compaction.
1. Kernel hugepage allocation latencies
With the system in such a fragmented state, a kernel driver then allocates
as many hugepages as possible and measures allocation latency:
(all latency values are in microseconds)
- With vanilla 5.6.0-rc3
percentile latency
–––––––––– –––––––
5 7894
10 9496
25 12561
30 15295
40 18244
50 21229
60 27556
75 30147
80 31047
90 32859
95 33799
Total 2M hugepages allocated = 383859 (749G worth of hugepages out of 762G
total free => 98% of free memory could be allocated as hugepages)
- With 5.6.0-rc3 + this patch, with proactiveness=20
sysctl -w vm.compaction_proactiveness=20
percentile latency
–––––––––– –––––––
5 2
10 2
25 3
30 3
40 3
50 4
60 4
75 4
80 4
90 5
95 429
Total 2M hugepages allocated = 384105 (750G worth of hugepages out of 762G
total free => 98% of free memory could be allocated as hugepages)
2. JAVA heap allocation
In this test, we first fragment memory using the same method as for (1).
Then, we start a Java process with a heap size set to 700G and request the
heap to be allocated with THP hugepages. We also set THP to madvise to
allow hugepage backing of this heap.
/usr/bin/time
java -Xms700G -Xmx700G -XX:+UseTransparentHugePages -XX:+AlwaysPreTouch
The above command allocates 700G of Java heap using hugepages.
- With vanilla 5.6.0-rc3
17.39user 1666.48system 27:37.89elapsed
- With 5.6.0-rc3 + this patch, with proactiveness=20
8.35user 194.58system 3:19.62elapsed
Elapsed time remains around 3:15, as proactiveness is further increased.
Note that proactive compaction happens throughout the runtime of these
workloads. The situation of one-time compaction, sufficient to supply
hugepages for following allocation stream, can probably happen for more
extreme proactiveness values, like 80 or 90.
In the above Java workload, proactiveness is set to 20. The test starts
with a node's score of 80 or higher, depending on the delay between the
fragmentation step and starting the benchmark, which gives more-or-less
time for the initial round of compaction. As t he benchmark consumes
hugepages, node's score quickly rises above the high threshold (90) and
proactive compaction starts again, which brings down the score to the low
threshold level (80). Repeat.
bpftrace also confirms proactive compaction running 20+ times during the
runtime of this Java benchmark. kcompactd threads consume 100% of one of
the CPUs while it tries to bring a node's score within thresholds.
Backoff behavior
================
Above workloads produce a memory state which is easy to compact. However,
if memory is filled with unmovable pages, proactive compaction should
essentially back off. To test this aspect:
- Created a kernel driver that allocates almost all memory as hugepages
followed by freeing first 3/4 of each hugepage.
- Set proactiveness=40
- Note that proactive_compact_node() is deferred maximum number of times
with HPAGE_FRAG_CHECK_INTERVAL_MSEC of wait between each check
(=> ~30 seconds between retries).
[1] https://patchwork.kernel.org/patch/11098289/
[2] https://lore.kernel.org/linux-mm/20161230131412.GI13301@dhcp22.suse.cz/
[3] https://lwn.net/Articles/817905/
Signed-off-by: Nitin Gupta <nigupta@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Oleksandr Natalenko <oleksandr@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com>
Reviewed-by: Oleksandr Natalenko <oleksandr@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Nitin Gupta <ngupta@nitingupta.dev>
Cc: Oleksandr Natalenko <oleksandr@redhat.com>
Link: http://lkml.kernel.org/r/20200616204527.19185-1-nigupta@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
Michel Lespinasse
|
c1e8d7c6a7 |
mmap locking API: convert mmap_sem comments
Convert comments that reference mmap_sem to reference mmap_lock instead. [akpm@linux-foundation.org: fix up linux-next leftovers] [akpm@linux-foundation.org: s/lockaphore/lock/, per Vlastimil] [akpm@linux-foundation.org: more linux-next fixups, per Michel] Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-13-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Michel Lespinasse
|
d8ed45c5dc |
mmap locking API: use coccinelle to convert mmap_sem rwsem call sites
This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Ethon Paul
|
68956ccb6c |
mm: fix a typo in comment "strucure"->"structure"
There is a typo in comment, fix it. Signed-off-by: Ethon Paul <ethp@qq.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Link: http://lkml.kernel.org/r/20200411064723.15855-1-ethp@qq.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Maninder Singh
|
730ec8c01a |
mm/vmscan.c: change prototype for shrink_page_list
commit
|
||
|
Joonsoo Kim
|
97a225e69a |
mm/page_alloc: integrate classzone_idx and high_zoneidx
classzone_idx is just different name for high_zoneidx now. So, integrate them and add some comment to struct alloc_context in order to reduce future confusion about the meaning of this variable. The accessor, ac_classzone_idx() is also removed since it isn't needed after integration. In addition to integration, this patch also renames high_zoneidx to highest_zoneidx since it represents more precise meaning. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Baoquan He <bhe@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Ye Xiaolong <xiaolong.ye@intel.com> Link: http://lkml.kernel.org/r/1587095923-7515-3-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Joonsoo Kim
|
3334a45eb9 |
mm/page_alloc: use ac->high_zoneidx for classzone_idx
Patch series "integrate classzone_idx and high_zoneidx", v5. This patchset is followup of the problem reported and discussed two years ago [1, 2]. The problem this patchset solves is related to the classzone_idx on the NUMA system. It causes a problem when the lowmem reserve protection exists for some zones on a node that do not exist on other nodes. This problem was reported two years ago, and, at that time, the solution got general agreements [2]. But it was not upstreamed. [1]: http://lkml.kernel.org/r/20180102063528.GG30397@yexl-desktop [2]: http://lkml.kernel.org/r/1525408246-14768-1-git-send-email-iamjoonsoo.kim@lge.com This patch (of 2): Currently, we use classzone_idx to calculate lowmem reserve proetection for an allocation request. This classzone_idx causes a problem on NUMA systems when the lowmem reserve protection exists for some zones on a node that do not exist on other nodes. Before further explanation, I should first clarify how to compute the classzone_idx and the high_zoneidx. - ac->high_zoneidx is computed via the arcane gfp_zone(gfp_mask) and represents the index of the highest zone the allocation can use - classzone_idx was supposed to be the index of the highest zone on the local node that the allocation can use, that is actually available in the system Think about following example. Node 0 has 4 populated zone, DMA/DMA32/NORMAL/MOVABLE. Node 1 has 1 populated zone, NORMAL. Some zones, such as MOVABLE, doesn't exist on node 1 and this makes following difference. Assume that there is an allocation request whose gfp_zone(gfp_mask) is the zone, MOVABLE. Then, it's high_zoneidx is 3. If this allocation is initiated on node 0, it's classzone_idx is 3 since actually available/usable zone on local (node 0) is MOVABLE. If this allocation is initiated on node 1, it's classzone_idx is 2 since actually available/usable zone on local (node 1) is NORMAL. You can see that classzone_idx of the allocation request are different according to their starting node, even if their high_zoneidx is the same. Think more about these two allocation requests. If they are processed on local, there is no problem. However, if allocation is initiated on node 1 are processed on remote, in this example, at the NORMAL zone on node 0, due to memory shortage, problem occurs. Their different classzone_idx leads to different lowmem reserve and then different min watermark. See the following example. root@ubuntu:/sys/devices/system/memory# cat /proc/zoneinfo Node 0, zone DMA per-node stats ... pages free 3965 min 5 low 8 high 11 spanned 4095 present 3998 managed 3977 protection: (0, 2961, 4928, 5440) ... Node 0, zone DMA32 pages free 757955 min 1129 low 1887 high 2645 spanned 1044480 present 782303 managed 758116 protection: (0, 0, 1967, 2479) ... Node 0, zone Normal pages free 459806 min 750 low 1253 high 1756 spanned 524288 present 524288 managed 503620 protection: (0, 0, 0, 4096) ... Node 0, zone Movable pages free 130759 min 195 low 326 high 457 spanned 1966079 present 131072 managed 131072 protection: (0, 0, 0, 0) ... Node 1, zone DMA pages free 0 min 0 low 0 high 0 spanned 0 present 0 managed 0 protection: (0, 0, 1006, 1006) Node 1, zone DMA32 pages free 0 min 0 low 0 high 0 spanned 0 present 0 managed 0 protection: (0, 0, 1006, 1006) Node 1, zone Normal per-node stats ... pages free 233277 min 383 low 640 high 897 spanned 262144 present 262144 managed 257744 protection: (0, 0, 0, 0) ... Node 1, zone Movable pages free 0 min 0 low 0 high 0 spanned 262144 present 0 managed 0 protection: (0, 0, 0, 0) - static min watermark for the NORMAL zone on node 0 is 750. - lowmem reserve for the request with classzone idx 3 at the NORMAL on node 0 is 4096. - lowmem reserve for the request with classzone idx 2 at the NORMAL on node 0 is 0. So, overall min watermark is: allocation initiated on node 0 (classzone_idx 3): 750 + 4096 = 4846 allocation initiated on node 1 (classzone_idx 2): 750 + 0 = 750 Allocation initiated on node 1 will have some precedence than allocation initiated on node 0 because min watermark of the former allocation is lower than the other. So, allocation initiated on node 1 could succeed on node 0 when allocation initiated on node 0 could not, and, this could cause too many numa_miss allocation. Then, performance could be downgraded. Recently, there was a regression report about this problem on CMA patches since CMA memory are placed in ZONE_MOVABLE by those patches. I checked that problem is disappeared with this fix that uses high_zoneidx for classzone_idx. http://lkml.kernel.org/r/20180102063528.GG30397@yexl-desktop Using high_zoneidx for classzone_idx is more consistent way than previous approach because system's memory layout doesn't affect anything to it. With this patch, both classzone_idx on above example will be 3 so will have the same min watermark. allocation initiated on node 0: 750 + 4096 = 4846 allocation initiated on node 1: 750 + 4096 = 4846 One could wonder if there is a side effect that allocation initiated on node 1 will use higher bar when allocation is handled on local since classzone_idx could be higher than before. It will not happen because the zone without managed page doesn't contributes lowmem_reserve at all. Reported-by: Ye Xiaolong <xiaolong.ye@intel.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Ye Xiaolong <xiaolong.ye@intel.com> Reviewed-by: Baoquan He <bhe@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Mel Gorman <mgorman@techsingularity.net> Link: http://lkml.kernel.org/r/1587095923-7515-1-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1587095923-7515-2-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Matthew Wilcox (Oracle)
|
9a42823a10 |
mm: return void from various readahead functions
ondemand_readahead has two callers, neither of which use the return value. That means that both ra_submit and __do_page_cache_readahead() can return void, and we don't need to worry that a present page in the readahead window causes us to return a smaller nr_pages than we ought to have. Similarly, no caller uses the return value from force_page_cache_readahead(). Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: Eric Biggers <ebiggers@google.com> Cc: Gao Xiang <gaoxiang25@huawei.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com> Cc: Miklos Szeredi <mszeredi@redhat.com> Link: http://lkml.kernel.org/r/20200414150233.24495-3-willy@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Matthew Wilcox (Oracle)
|
cee9a0c4e8 |
mm: move readahead prototypes from mm.h
Patch series "Change readahead API", v11. This series adds a readahead address_space operation to replace the readpages operation. The key difference is that pages are added to the page cache as they are allocated (and then looked up by the filesystem) instead of passing them on a list to the readpages operation and having the filesystem add them to the page cache. It's a net reduction in code for each implementation, more efficient than walking a list, and solves the direct-write vs buffered-read problem reported by yu kuai at http://lkml.kernel.org/r/20200116063601.39201-1-yukuai3@huawei.com The only unconverted filesystems are those which use fscache. Their conversion is pending Dave Howells' rewrite which will make the conversion substantially easier. This should be completed by the end of the year. I want to thank the reviewers/testers; Dave Chinner, John Hubbard, Eric Biggers, Johannes Thumshirn, Dave Sterba, Zi Yan, Christoph Hellwig and Miklos Szeredi have done a marvellous job of providing constructive criticism. These patches pass an xfstests run on ext4, xfs & btrfs with no regressions that I can tell (some of the tests seem a little flaky before and remain flaky afterwards). This patch (of 25): The readahead code is part of the page cache so should be found in the pagemap.h file. force_page_cache_readahead is only used within mm, so move it to mm/internal.h instead. Remove the parameter names where they add no value, and rename the ones which were actively misleading. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: Dave Chinner <dchinner@redhat.com> Cc: Eric Biggers <ebiggers@google.com> Cc: Gao Xiang <gaoxiang25@huawei.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Miklos Szeredi <mszeredi@redhat.com> Link: http://lkml.kernel.org/r/20200414150233.24495-1-willy@infradead.org Link: http://lkml.kernel.org/r/20200414150233.24495-2-willy@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Alexander Duyck
|
624f58d8f4 |
mm: add function __putback_isolated_page
There are cases where we would benefit from avoiding having to go through the allocation and free cycle to return an isolated page. Examples for this might include page poisoning in which we isolate a page and then put it back in the free list without ever having actually allocated it. This will enable us to also avoid notifiers for the future free page reporting which will need to avoid retriggering page reporting when returning pages that have been reported on. Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Nitesh Narayan Lal <nitesh@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Pankaj Gupta <pagupta@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Wang <wei.w.wang@intel.com> Cc: Yang Zhang <yang.zhang.wz@gmail.com> Cc: wei qi <weiqi4@huawei.com> Link: http://lkml.kernel.org/r/20200211224624.29318.89287.stgit@localhost.localdomain Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Rik van Riel
|
b06eda091e |
mm,compaction,cma: add alloc_contig flag to compact_control
Patch series "fix THP migration for CMA allocations", v2. Transparent huge pages are allocated with __GFP_MOVABLE, and can end up in CMA memory blocks. Transparent huge pages also have most of the infrastructure in place to allow migration. However, a few pieces were missing, causing THP migration to fail when attempting to use CMA to allocate 1GB hugepages. With these patches in place, THP migration from CMA blocks seems to work, both for anonymous THPs and for tmpfs/shmem THPs. This patch (of 2): Add information to struct compact_control to indicate that the allocator would really like to clear out this specific part of memory, used by for example CMA. Signed-off-by: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Zi Yan <ziy@nvidia.com> Cc: Joonsoo Kim <js1304@gmail.com> Link: http://lkml.kernel.org/r/20200227213238.1298752-1-riel@surriel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Mateusz Nosek
|
736838e964 |
mm, pagealloc: micro-optimisation: save two branches on hot page allocation path
This patch makes ALLOC_KSWAPD equal to __GFP_KSWAPD_RECLAIM (cast to int).
Thanks to that code like:
if (gfp_mask & __GFP_KSWAPD_RECLAIM)
alloc_flags |= ALLOC_KSWAPD;
can be changed to:
alloc_flags |= (__force int) (gfp_mask &__GFP_KSWAPD_RECLAIM);
Thanks to this one branch less is generated in the assembly.
In case of ALLOC_KSWAPD flag two branches are saved, first one in code
that always executes in the beginning of page allocation and the second
one in loop in page allocator slowpath.
Signed-off-by: Mateusz Nosek <mateusznosek0@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Link: http://lkml.kernel.org/r/20200304162118.14784-1-mateusznosek0@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Peter Xu
|
4064b98270 |
mm: allow VM_FAULT_RETRY for multiple times
The idea comes from a discussion between Linus and Andrea [1].
Before this patch we only allow a page fault to retry once. We achieved
this by clearing the FAULT_FLAG_ALLOW_RETRY flag when doing
handle_mm_fault() the second time. This was majorly used to avoid
unexpected starvation of the system by looping over forever to handle the
page fault on a single page. However that should hardly happen, and after
all for each code path to return a VM_FAULT_RETRY we'll first wait for a
condition (during which time we should possibly yield the cpu) to happen
before VM_FAULT_RETRY is really returned.
This patch removes the restriction by keeping the FAULT_FLAG_ALLOW_RETRY
flag when we receive VM_FAULT_RETRY. It means that the page fault handler
now can retry the page fault for multiple times if necessary without the
need to generate another page fault event. Meanwhile we still keep the
FAULT_FLAG_TRIED flag so page fault handler can still identify whether a
page fault is the first attempt or not.
Then we'll have these combinations of fault flags (only considering
ALLOW_RETRY flag and TRIED flag):
- ALLOW_RETRY and !TRIED: this means the page fault allows to
retry, and this is the first try
- ALLOW_RETRY and TRIED: this means the page fault allows to
retry, and this is not the first try
- !ALLOW_RETRY and !TRIED: this means the page fault does not allow
to retry at all
- !ALLOW_RETRY and TRIED: this is forbidden and should never be used
In existing code we have multiple places that has taken special care of
the first condition above by checking against (fault_flags &
FAULT_FLAG_ALLOW_RETRY). This patch introduces a simple helper to detect
the first retry of a page fault by checking against both (fault_flags &
FAULT_FLAG_ALLOW_RETRY) and !(fault_flag & FAULT_FLAG_TRIED) because now
even the 2nd try will have the ALLOW_RETRY set, then use that helper in
all existing special paths. One example is in __lock_page_or_retry(), now
we'll drop the mmap_sem only in the first attempt of page fault and we'll
keep it in follow up retries, so old locking behavior will be retained.
This will be a nice enhancement for current code [2] at the same time a
supporting material for the future userfaultfd-writeprotect work, since in
that work there will always be an explicit userfault writeprotect retry
for protected pages, and if that cannot resolve the page fault (e.g., when
userfaultfd-writeprotect is used in conjunction with swapped pages) then
we'll possibly need a 3rd retry of the page fault. It might also benefit
other potential users who will have similar requirement like userfault
write-protection.
GUP code is not touched yet and will be covered in follow up patch.
Please read the thread below for more information.
[1] https://lore.kernel.org/lkml/20171102193644.GB22686@redhat.com/
[2] https://lore.kernel.org/lkml/20181230154648.GB9832@redhat.com/
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Brian Geffon <bgeffon@google.com>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Denis Plotnikov <dplotnikov@virtuozzo.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Martin Cracauer <cracauer@cons.org>
Cc: Marty McFadden <mcfadden8@llnl.gov>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Maya Gokhale <gokhale2@llnl.gov>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Link: http://lkml.kernel.org/r/20200220160246.9790-1-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
Yang Shi
|
1eb6234e52 |
mm: swap: make page_evictable() inline
When backporting commit |