Current implementation of hid_hw_start() allows connect_mask to be 0.
Setting hdev->claimed = HID_CLAIMED_INPUT before calling hid_hw_start() is not
necessary. Remove it.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-By: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Commit 4ea5454203
[HID: Fix race condition between driver core and ll-driver] introduced
new locking around probe/remove functions that prevents any report/reply
from hardware to reach driver until it returned from probe.
As such, the ask-reply way to checking picoLCD firmware version during
probe is bound to timeout and let probe fail.
Drop the check to let driver successfully probe again (until locking issues
are resolved allowing to reinstate the check).
Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Current code missed the definition for picolcd_debug_out_report, but add
definition for picolcd_debug_raw_event twice.
This patch fixes below build error:
CC [M] drivers/hid/hid-picolcd_core.o
In file included from drivers/hid/hid-picolcd_core.c:34:0:
drivers/hid/hid-picolcd.h:176:20: error: redefinition of 'picolcd_debug_raw_event'
drivers/hid/hid-picolcd.h:162:20: note: previous definition of 'picolcd_debug_raw_event' was here
make[2]: *** [drivers/hid/hid-picolcd_core.o] Error 1
make[1]: *** [drivers/hid] Error 2
make: *** [drivers] Error 2
if CONFIG_DEBUG_FS is unset.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Smatch complains that the NULL checking in this function is not
consistent and could lead to a NULL dereference. The comments say that
we should return here if rc_dev is NULL so I've changed the test to
match the comment.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The first payload byte indicates how many IR data bytes are following, not
including itself. The IR data bytes appear in pairs as they represent a
series of 16bit intervals.
Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Matthieu CASTET adjusted picolcd_debug_out_report() to only operate when
there is an active listener on debugfs for events.
Do the same on the more important picolcd_debug_raw_event() that is
called in interrupt context as opposed to picolcd_debug_out_report()
which happens in whichever context that sends reports to device.
Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Implement support for picoLCD's CIR header using RC_CORE for decoding
the IR event stream.
Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Split out all FB related data out of struct picolcd_data into a struct
picolcd_fb_data that is allocated with fb_info. This way fb_info may
cleanly outlive struct picolcd_data for as long as needed for its last
user to drop his reference.
Access to struct picolcd_data is now protected with struct
picolcd_fb_data's lock and tile update reports are only generated
while picolcd_fbdata->picolcd is not NULL and is not marked as failed
(which indicates unplug in progress).
Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Driver code expects to get access to struct picolcd_data from hiddev
and is not prepared to find a NULL pointer there. Most prominent
candidate to trip on it is picolcd_fb_deferred_io().
Delay removing struct picolcd_data from hiddev until all sub-devices
have been unregistered.
Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
m68k/allmodconfig:
drivers/hid/hid-picolcd_debugfs.c: In function ‘picolcd_debug_reset_write’:
drivers/hid/hid-picolcd_debugfs.c:54: error: implicit declaration of function ‘copy_from_user’
drivers/hid/hid-picolcd_debugfs.c: In function ‘picolcd_debug_eeprom_read’:
drivers/hid/hid-picolcd_debugfs.c:112: error: implicit declaration of function ‘copy_to_user’
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Fixes thes build errors:
drivers/hid/hid-picolcd_fb.c: In function 'picolcd_fb_destroy':
drivers/hid/hid-picolcd_fb.c:350:2: error: implicit declaration of function 'vfree' [-Werror=implicit-function-declaration]
drivers/hid/hid-picolcd_fb.c: In function 'picolcd_init_framebuffer':
drivers/hid/hid-picolcd_fb.c:508:2: error: implicit declaration of function 'vmalloc' [-Werror=implicit-function-declaration]
drivers/hid/hid-picolcd_fb.c:508:12: warning: assignment makes pointer from integer without a cast [enabled by default]
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Stop earlier attempting to submit new reports/URBs (though locking and
usbhid still prevents to bail out early enough to not produce multiple
hid-picolcd 0003:04D8:C002.0003: usb_submit_urb(out) failed: -19
messages in kernel log.
Strengthen framebuffer removal to be less racy.
Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
WARNING: static const char * array should probably be static const char * const
+static const char *error_codes[] = {
WARNING: min() should probably be min_t(size_t, 20, s)
+ raw_data[2] = min((size_t)20, s);
Note: the second min_t suggestion cannot be followed because GCC is not
smart enough to track constants through it and make
copy_from_user_overflow() check happy.
WARNING: min() should probably be min_t(u8, 20, raw_data[2])
+ if (copy_from_user(raw_data+3, u, min((u8)20, raw_data[2])))
return -EFAULT;
Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
In order to make code maintenance easier, split the vairous
functions into individial files (this removes a bunch of #ifdefs).
Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add Asus All-In-One PC keyboard model AK1D.
BugLink: https://bugs.launchpad.net/bugs/1027789
Signed-off-by: Cyrus Lien <cyrus.lien@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add yet another device to the list of Cypress barcode scanners
needing the CP_RDESC_SWAPPED_MIN_MAX quirk.
Signed-off-by: Lionel Vaux (iouri) <lionel.vaux@free.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
hid-picolcd and hid-wiimote do not allow any of hidinput, hiddev or hidraw
to claim the device but still want to remain on the bus. Hence, if a
driver uses the raw_event callback but no other listener claimed the
device, we still leave it on the bus as the driver handles everything by
itself. It thus becomes its own listener.
Under some circumstances (eg., hidinput_connect() fails and raw_event set)
a device may be left on the bus even though it requires external
listeners. But then if hidinput_connect() fails there are bigger issues
than a device that is left unhandled. So we can safely use this heuristic
to avoid adding another flag for special devices like hid-picolcd and
hid-wiimote.
This also removes the ugly hack from hid-picolcd as this is no longer
required.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch (as1597) fixes some of the error paths in usbhid's suspend
routine. The driver was not careful to restart everything that might
have been stopped, in cases where a suspend failed.
For example, once the HID_SUSPENDED flag is set, an output report
submission would not restart the corresponding URB queue. If a
suspend fails, it's therefore necessary to check whether the queues
need to be restarted.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch (as1596) improves the queue-restart logic in usbhid by
checking to see if the device is suspended or a reset is about to
occur. There's no point submitting an URB if either of those is
true.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch (as1595) improves the usbhid driver by using the
HID_SUSPENDED bitflag to indicate that the device is suspended rather
than using HID_REPORTED_IDLE, which the patch removes.
Since HID_SUSPENDED was not being used for anything, and since the
name "HID_REPORTED_IDLE" doesn't convey much meaning, the end result
is easier to read and understand.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch (as1594) simplifies the usbhid driver by inlining a couple
of routines. As a result of an earlier patch, irq_out_pump_restart()
and ctrl_pump_restart() are each used in only one place. Since they
don't really do what their names say, and since they each involve only
about two lines of actual code, there's no reason to keep them as
separate functions.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch (as1593) fixes some logic errors in the usbhid driver
relating to runtime PM. The driver does not balance its calls to
usb_autopm_get_interface_async() and usb_autopm_put_interface_async().
For example, when the control queue is restarted the driver does a
_get. But the resume won't happen immediately, so the driver leaves
the queue stopped. When the resume does occur, the queue is restarted
and a second _get occurs, with no balancing _put.
The patch fixes the problem by rearranging the logic for restarting
the queues. All the _get/_put calls and bitflag settings in
__usbhid_submit_report() are moved into the queue-restart routines. A
balancing _put call is added for the case where the queue is still
suspended. A call to irq_out_pump_restart(), which doesn't take all
the right actions for restarting the irq-OUT queue, is replaced by a
call to usbhid_restart_out_queue(), which does. Similarly for
ctrl_pump_restart().
Finally, new code is added to prevent an autosuspend from happening
every time an URB is cancelled, and the comments explaining what
happens when an URB needs to be cancelled are expanded and clarified.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch (as1592) fixes an obscure problem in the usbhid driver.
Under some circumstances, a control or interrupt-OUT URB can be
submitted twice. This will happen if the first submission fails; the
queue pointers aren't updated, so the next time the queue is restarted
the same URB will be submitted again.
The problem is that raw_report gets deallocated during the first
submission. The second submission will then dereference and try to
free an already-freed region of memory. The patch fixes the problem
by setting raw_report to NULL when it is deallocated and checking for
NULL before dereferencing it.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When using hidraw, hid buffer can be big and take lot's of
time to process (interrupt) kernel context.
Don't try to parse report if we are only interrested in hidraw.
Also don't prepare data for debug stuff if no debugfs file
are opened.
Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
If we don't read fast enough hidraw device, hidraw_report_event
will cycle and we will leak list->buffer.
Also list->buffer are not free on release.
After this patch, kmemleak report nothing.
Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This was detected because events with invalid types were arriving
to userspace.
The code before this patch would only work for the first event in the
queue (when uhid->tail is 0).
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Reviewed-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The sensor attr can be used to tweak the optical sensor of the Savu.
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull HID update from Jiri Kosina:
"A final round of changes for HID for 3.5: just device ID additions."
* 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: hid-multitouch: add support for Zytronic panels
HID: add Sennheiser BTD500USB device support
HID: add battery quirk for Apple Wireless ANSI
Pull input layer fixes from Dmitry Torokhov:
"The changes are limited to adding new VID/PID combinations to drivers
to enable support for new versions of hardware, most notably hardware
found in new MacBook Pro Retina boxes."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: xpad - add Andamiro Pump It Up pad
Input: xpad - add signature for Razer Onza Tournament Edition
Input: xpad - handle all variations of Mad Catz Beat Pad
Input: bcm5974 - Add support for 2012 MacBook Pro Retina
HID: add support for 2012 MacBook Pro Retina
Corrects two HID descriptor issues, which prevent some Holtek based
(USB ID 04d9:a055) keyboards from working. The error when not using
the driver is: generic-usb: probe ... failed with error -22 .
Signed-off-by: Tom Harwood <tomharwood@fastmail.fm>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The device should be handled by xpad driver instead of generic HID driver.
Signed-off-by: Yuri Khan <yurivkhan@gmail.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add support for the 15'' MacBook Pro Retina. The keyboard is
the same as recent models.
The patch needs to be synchronized with the bcm5974 patch for
the trackpad - as usual.
Patch originally written by clipcarl (forums.opensuse.org).
[rydberg@euromail.se: Amended mouse ignore lines]
Signed-off-by: Ryan Bourgeois <bluedragonx@gmail.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The keys are found on the keyboards bundled with HP All-In-One machines
with USB VID/PID of 04ca:004d and 04f2:1061.
Signed-off-by: Keng-Yu Lin <kengyu@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Sennheiser BTD500USB composit device requires the
HID_QUIRK_NOGET flag to be set for working proper. Without the
flag the device crashes during hid intialization.
Signed-off-by: Frank Kunz <xxxxxmichl@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The driver for Apple Magic Trackpad/Mouse currently uses
Multi-touch Protocol A (MT-A) to report touch events and uses
ABS_MT_TRACKING_ID to do finger tracking. The fact of the device
being able to track individual finger makes it possible to
report touch events using MT-B. This patch converts the driver
to use MT-B as it is preferred to MT-A.
V4: Removed BTN_TOUCH evnet.
V3: Removed the single touch related logic.
V2: Converting entirely to MT-B as Henrik Rydberg suggested.
Signed-off-by: Yufeng Shen <miletus@chromium.org>
Reviewed-and-tested-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Remove the report_touches switch as it is not so useful to turn
off reporting touch events for a touch device. Let the userspace
to do the filtering if the turning off is needed.
V2: Remove report_touches as suggeted by Chase Douglas
Signed-off-by: Yufeng Shen <miletus@chromium.org>
Reviewed-and-tested-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI, to the quirk list since it report
wrong feature type and wrong percentage range.
Signed-off-by: Daniel Nicoletti <dantti12@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Did this to illustrate my understanding of the firmware generations:
Valo and Kone were 1st generation
Arvo was externaly developed and lies in the middle
All others until now are considered 2nd generation
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Reduced code duplication by moving functions from individual drivers
to roccat-common module.
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds rupport for Roccat Savu gaming mouse.
In comparison to the other Roccat modules I tried to move even more
functionality to userland.
Userland tools can soon be found at http://sourceforge.net/projects/roccat
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Zytronic panels shows a new way of setting the Input Mode feature.
This feature is put in the second usage in the HID feature, instead
of the first, as the majority of the multitouch devices.
This patch adds a detection step when the feature is presented to know
where the feature is located in the report. We can then trigger the right
command to the device. This removes the magic number "0" in the function
mt_set_input_mode.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull HID fixes from Jiri Kosina:
"The most important one is a purification of Kconfig for CONFIG_HID;
the inclusion of HID groups and autoloading didn't leave the Kconfig
in a really consistent state. Henrik's patch fixes that. In addition
to that, there are two small fixes for logitech and magicmouse
drivers."
* 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: Fix the generic Kconfig options
HID: magicmouse: Correct report range of major / minor axes
HID: logitech: don't use stack based dj_report structures
