Simplify the objdump command by not piping the output of objdump through
grep. Instead, drop lines that match the grep pattern during the reading
loop.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: clang-built-linux@googlegroups.com
Link: http://lore.kernel.org/lkml/20191010183649.23768-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reduce duplicated logic by using the subcmd library. Ensure when errors
occur they are reported to the caller. Before this patch, if no lines
are read the error status is 0.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: clang-built-linux@googlegroups.com
Link: http://lore.kernel.org/lkml/20191010183649.23768-3-irogers@google.com
Link: http://lore.kernel.org/lkml/20191015003418.62563-1-irogers@google.com
[ merged follow up fix for NULL termination as in the 2nd link above ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Objdump output is parsed using getline which allocates memory for the
read. Getline will realloc if the memory is too small, but currently the
line is always freed after the call.
Simplify parse_objdump_line by performing the reading in symbol__disassemble.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: clang-built-linux@googlegroups.com
Link: http://lore.kernel.org/lkml/20191010183649.23768-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We received a user report that call-graph DWARF mode was enabled in
'perf record' but 'perf report' didn't unwind the callstack correctly.
The reason was, libunwind was not compiled in.
We can use 'perf -vv' to check the compiled libraries but it would be
valuable to report a warning to user directly (especially valuable for
a perf newbie).
The warning is:
Warning:
Please install libunwind development packages during the perf build.
Both TUI and stdio are supported.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191011022122.26369-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When executing the task exit testing case, perf gets stuck in an endless
loop this case and doesn't return back on Arm64 Juno board.
After digging into this issue, since Juno board has Arm's big.LITTLE
CPUs, thus the PMUs are not compatible between the big CPUs and little
CPUs. This leads to a PMU event that cannot be enabled properly when
the traced task is migrated from one variant's CPU to another variant.
Finally, the test case runs into infinite loop for cannot read out any
event data after return from polling.
Eventually, we need to work out formal solution to allow PMU events can
be freely migrated from one CPU variant to another, but this is a
difficult task and a different topic. This patch tries to fix the Perf
test case to avoid infinite loop, when the testing detects 1000 times
retrying for reading empty events, it will directly bail out and return
failure. This allows the Perf tool can continue its other test cases.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20191011091942.29841-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When fail to mmap events in task exit case, it misses to set 'err' to
-1; thus the testing will not report failure for it.
This patch sets 'err' to -1 when fails to mmap events, thus Perf tool
can report correct result.
Fixes: d723a55096 ("perf test: Add test case for checking number of EXIT events")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20191011091942.29841-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In the earlier fix for the memory overrun of id arrays I managed to typo
the wrong event in the fix.
Of course we need to close the current event in the loop, not the
original failing event.
The same test case as in the original patch still passes.
Fixes: 7834fa948b ("perf evlist: Fix access of freed id arrays")
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20191011182140.8353-2-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
My earlier patch to just enable --reltime with --time was a little too
optimistic. The --time parsing would accept absolute time, which is
very confusing to the user.
Support relative time in --time parsing too. This only works with recent
perf record that records the first sample time. Otherwise we error out.
Fixes: 3714437d3f ("perf script: Allow --time with --reltime")
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20191011182140.8353-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf trace:
Arnaldo Carvalho de Melo:
- Reuse the strace-like syscall_arg_fmt->scnprintf() beautification routines
(convert integer arguments into strings, like open flags, etc) in tracepoint
arguments.
For now the type based scnprintf routines (pid_t, umode_t, etc) and the
ones based in well known arg name based ("fd", etc) gets associated with
tracepoint args of that type.
A tracepoint only arg, "msr", for the msr:{write,read}_msr gets added as
an initial step.
- Introduce syscall_arg_fmt->strtoul() methods to be the reverse operation
of ->scnprintf(), i.e. to go from a string to an integer.
- Implement --filter, just like in 'perf record', that affects the tracepoint
events specied thus far in the command line, use the ->strtoul() methods
to allow strings in tables associated with beautifiers to the integers
the in-kernel tracepoint (eBPF later) filters expect, e.g.:
# perf trace --max-events 1 -e sched:*ipi --filter="cpu==1 || cpu==2"
0.000 as/24630 sched:sched_wake_idle_without_ipi(cpu: 1)
#
# perf trace --max-events 1 --max-stack=32 -e msr:* --filter="msr==IA32_TSC_DEADLINE"
207.000 cc1/19963 msr:write_msr(msr: IA32_TSC_DEADLINE, val: 5442316760822)
do_trace_write_msr ([kernel.kallsyms])
do_trace_write_msr ([kernel.kallsyms])
lapic_next_deadline ([kernel.kallsyms])
clockevents_program_event ([kernel.kallsyms])
hrtimer_interrupt ([kernel.kallsyms])
smp_apic_timer_interrupt ([kernel.kallsyms])
apic_timer_interrupt ([kernel.kallsyms])
[0x6ff66c] (/usr/lib/gcc-cross/alpha-linux-gnu/8/cc1)
[0x7047c3] (/usr/lib/gcc-cross/alpha-linux-gnu/8/cc1)
[0x707708] (/usr/lib/gcc-cross/alpha-linux-gnu/8/cc1)
execute_one_pass (/usr/lib/gcc-cross/alpha-linux-gnu/8/cc1)
[0x4f3d37] (/usr/lib/gcc-cross/alpha-linux-gnu/8/cc1)
[0x4f3d49] (/usr/lib/gcc-cross/alpha-linux-gnu/8/cc1)
execute_pass_list (/usr/lib/gcc-cross/alpha-linux-gnu/8/cc1)
cgraph_node::expand (/usr/lib/gcc-cross/alpha-linux-gnu/8/cc1)
[0x2625b4] (/usr/lib/gcc-cross/alpha-linux-gnu/8/cc1)
symbol_table::finalize_compilation_unit (/usr/lib/gcc-cross/alpha-linux-gnu/8/cc1)
[0x5ae8b9] (/usr/lib/gcc-cross/alpha-linux-gnu/8/cc1)
toplev::main (/usr/lib/gcc-cross/alpha-linux-gnu/8/cc1)
main (/usr/lib/gcc-cross/alpha-linux-gnu/8/cc1)
[0x26b6a] (/usr/lib/x86_64-linux-gnu/libc-2.29.so)
#
# perf trace --max-events 8 -e msr:* --filter="msr==IA32_SPEC_CTRL"
0.000 :13281/13281 msr:write_msr(msr: IA32_SPEC_CTRL, val: 6)
0.063 migration/3/25 msr:write_msr(msr: IA32_SPEC_CTRL)
0.217 kworker/u16:1-/4826 msr:write_msr(msr: IA32_SPEC_CTRL)
0.687 rcu_sched/11 msr:write_msr(msr: IA32_SPEC_CTRL)
0.696 :13280/13280 msr:write_msr(msr: IA32_SPEC_CTRL, val: 6)
0.305 :13281/13281 msr:write_msr(msr: IA32_SPEC_CTRL, val: 6)
0.355 :13274/13274 msr:write_msr(msr: IA32_SPEC_CTRL, val: 6)
2.743 kworker/u16:0-/6711 msr:write_msr(msr: IA32_SPEC_CTRL)
#
# perf trace --max-events 8 --cpu 1 -e msr:* --filter="msr!=IA32_SPEC_CTRL && msr!=IA32_TSC_DEADLINE && msr != FS_BASE"
0.000 mtr-packet/30819 msr:write_msr(msr: 0x830, val: 68719479037)
0.096 :0/0 msr:read_msr(msr: IA32_TSC_ADJUST)
238.925 mtr-packet/30819 msr:write_msr(msr: 0x830, val: 8589936893)
511.010 :0/0 msr:write_msr(msr: 0x830, val: 68719479037)
1005.052 :0/0 msr:read_msr(msr: IA32_TSC_ADJUST)
1235.131 CPU 0/KVM/3750 msr:write_msr(msr: 0x830, val: 4294969595)
1235.195 CPU 0/KVM/3750 msr:read_msr(msr: IA32_SYSENTER_ESP, val: -2199023037952)
1235.201 CPU 0/KVM/3750 msr:read_msr(msr: IA32_APICBASE, val: 4276096000)
#
- Default to not using libtraceevent and its plugins for beautifying
tracepoint arguments, since now we're reusing the strace-like beatufiers.
Use --libtraceevent_print (using just --libtrace is unambiguous and can
be used as a short hand) to go back to those beautifiers.
This will help in the transition, as can be seen in some of the sched tracepoints
that still need some work in the libbeauty based mode:
# trace --no-inherit -e msr:*,*sleep,sched:* sleep 1
0.000 ( ): sched:sched_waking(comm: "trace", pid: 3319 (trace), prio: 120, success: 1)
0.006 ( ): sched:sched_wakeup(comm: "trace", pid: 3319 (trace), prio: 120, success: 1)
0.348 ( ): sched:sched_process_exec(filename: 140212596720100, pid: 3319 (sleep), old_pid: 3319 (sleep))
0.490 ( ): msr:write_msr(msr: FS_BASE, val: 139631189321088)
0.670 ( ): nanosleep(rqtp: 0x7ffc52c23bc0) ...
0.674 ( ): sched:sched_stat_runtime(comm: "sleep", pid: 3319 (sleep), runtime: 659259, vruntime: 78942418342)
0.675 ( ): sched:sched_switch(prev_comm: "sleep", prev_pid: 3319 (sleep), prev_prio: 120, prev_state: 1, next_comm: "swapper/0", next_prio: 120)
1001.059 ( ): sched:sched_waking(comm: "sleep", pid: 3319 (sleep), prio: 120, success: 1)
1001.098 ( ): sched:sched_wakeup(comm: "sleep", pid: 3319 (sleep), prio: 120, success: 1)
0.670 (1000.504 ms): ... [continued]: nanosleep()) = 0
1001.456 ( ): sched:sched_process_exit(comm: "sleep", pid: 3319 (sleep), prio: 120)
# trace --libtrace --no-inherit -e msr:*,*sleep,sched:* sleep 1
# trace --libtrace --no-inherit -e msr:*,*sleep,sched:* sleep 1
0.000 ( ): sched:sched_waking(comm=trace pid=3323 prio=120 target_cpu=000)
0.007 ( ): sched:sched_wakeup(comm=trace pid=3323 prio=120 target_cpu=000)
0.382 ( ): sched:sched_process_exec(filename=/usr/bin/sleep pid=3323 old_pid=3323)
0.525 ( ): msr:write_msr(c0000100, value 7f5d508a0580)
0.713 ( ): nanosleep(rqtp: 0x7fff487fb4a0) ...
0.717 ( ): sched:sched_stat_runtime(comm=sleep pid=3323 runtime=617722 [ns] vruntime=78957731636 [ns])
0.719 ( ): sched:sched_switch(prev_comm=sleep prev_pid=3323 prev_prio=120 prev_state=S ==> next_comm=swapper/0 next_pid=0 next_prio=120)
1001.117 ( ): sched:sched_waking(comm=sleep pid=3323 prio=120 target_cpu=000)
1001.157 ( ): sched:sched_wakeup(comm=sleep pid=3323 prio=120 target_cpu=000)
0.713 (1000.522 ms): ... [continued]: nanosleep()) = 0
1001.538 ( ): sched:sched_process_exit(comm=sleep pid=3323 prio=120)
#
- Make -v (verbose) mode be honoured for .perfconfig based trace.add_events,
to help in diagnosing problems with building eBPF events (-e source.c).
- When using eBPF syscall payload augmentation do not show strace-like
syscalls when all the user specified was some tracepoint event, bringing
the behaviour in line with that of when not using eBPF augmentation.
Intel PT:
exported-sql-viewer GUI:
Adrian Hunter:
- Add LookupModel, HBoxLayout, VBoxLayout, global time range calculations
so as to add a time chart by CPU.
perf script:
Andi Kleen:
- Allow --time (to specify a time span of interest) with --reltime
perf diff:
Jin Yao:
- Report noise for cycles diff, i.e. a histogram + stddev.
(timestamps relative to start).
perf annotate:
Arnaldo Carvalho de Melo:
- Initialize env->cpuid when running in live mode (perf top), as it
is used in some of the per arch annotation init routines.
samples bpf:
Björn Töpel:
- Fixup fallout of using tools/perf/perf-sys. from outside tools/perf.
Core:
Ian Rogers:
- Avoid 'sample_reg_masks' being const + weak, as this breaks with some
compilers that constant-propagate from the weak symbol.
libperf:
- First part of moving the perf_mmap class from tools/perf to libperf.
- Propagate CFLAGS to libperf from the tools/perf Makefile.
Vendor events:
John Garry:
- Add entry in MAINTAINERS with reviewers for the for perf tool arm64
pmu-events files.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXaDUqgAKCRCyPKLppCJ+
J5ypAP9spIHEx/thoT72iaApkdD9tOXls4lMTUFhOW39rrZV1AD9F3+3kfQ62kav
0j1sZGd7s5sDiLr1joJCAFiVPZc86wo=
=r+Ik
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-5.5-20191011' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
perf trace:
Arnaldo Carvalho de Melo:
- Reuse the strace-like syscall_arg_fmt->scnprintf() beautification routines
(convert integer arguments into strings, like open flags, etc) in tracepoint
arguments.
For now the type based scnprintf routines (pid_t, umode_t, etc) and the
ones based in well known arg name based ("fd", etc) gets associated with
tracepoint args of that type.
A tracepoint only arg, "msr", for the msr:{write,read}_msr gets added as
an initial step.
- Introduce syscall_arg_fmt->strtoul() methods to be the reverse operation
of ->scnprintf(), i.e. to go from a string to an integer.
- Implement --filter, just like in 'perf record', that affects the tracepoint
events specied thus far in the command line, use the ->strtoul() methods
to allow strings in tables associated with beautifiers to the integers
the in-kernel tracepoint (eBPF later) filters expect, e.g.:
# perf trace --max-events 1 -e sched:*ipi --filter="cpu==1 || cpu==2"
0.000 as/24630 sched:sched_wake_idle_without_ipi(cpu: 1)
#
# perf trace --max-events 1 --max-stack=32 -e msr:* --filter="msr==IA32_TSC_DEADLINE"
207.000 cc1/19963 msr:write_msr(msr: IA32_TSC_DEADLINE, val: 5442316760822)
do_trace_write_msr ([kernel.kallsyms])
do_trace_write_msr ([kernel.kallsyms])
lapic_next_deadline ([kernel.kallsyms])
clockevents_program_event ([kernel.kallsyms])
hrtimer_interrupt ([kernel.kallsyms])
smp_apic_timer_interrupt ([kernel.kallsyms])
apic_timer_interrupt ([kernel.kallsyms])
[0x6ff66c] (/usr/lib/gcc-cross/alpha-linux-gnu/8/cc1)
[0x7047c3] (/usr/lib/gcc-cross/alpha-linux-gnu/8/cc1)
[0x707708] (/usr/lib/gcc-cross/alpha-linux-gnu/8/cc1)
execute_one_pass (/usr/lib/gcc-cross/alpha-linux-gnu/8/cc1)
[0x4f3d37] (/usr/lib/gcc-cross/alpha-linux-gnu/8/cc1)
[0x4f3d49] (/usr/lib/gcc-cross/alpha-linux-gnu/8/cc1)
execute_pass_list (/usr/lib/gcc-cross/alpha-linux-gnu/8/cc1)
cgraph_node::expand (/usr/lib/gcc-cross/alpha-linux-gnu/8/cc1)
[0x2625b4] (/usr/lib/gcc-cross/alpha-linux-gnu/8/cc1)
symbol_table::finalize_compilation_unit (/usr/lib/gcc-cross/alpha-linux-gnu/8/cc1)
[0x5ae8b9] (/usr/lib/gcc-cross/alpha-linux-gnu/8/cc1)
toplev::main (/usr/lib/gcc-cross/alpha-linux-gnu/8/cc1)
main (/usr/lib/gcc-cross/alpha-linux-gnu/8/cc1)
[0x26b6a] (/usr/lib/x86_64-linux-gnu/libc-2.29.so)
#
# perf trace --max-events 8 -e msr:* --filter="msr==IA32_SPEC_CTRL"
0.000 :13281/13281 msr:write_msr(msr: IA32_SPEC_CTRL, val: 6)
0.063 migration/3/25 msr:write_msr(msr: IA32_SPEC_CTRL)
0.217 kworker/u16:1-/4826 msr:write_msr(msr: IA32_SPEC_CTRL)
0.687 rcu_sched/11 msr:write_msr(msr: IA32_SPEC_CTRL)
0.696 :13280/13280 msr:write_msr(msr: IA32_SPEC_CTRL, val: 6)
0.305 :13281/13281 msr:write_msr(msr: IA32_SPEC_CTRL, val: 6)
0.355 :13274/13274 msr:write_msr(msr: IA32_SPEC_CTRL, val: 6)
2.743 kworker/u16:0-/6711 msr:write_msr(msr: IA32_SPEC_CTRL)
#
# perf trace --max-events 8 --cpu 1 -e msr:* --filter="msr!=IA32_SPEC_CTRL && msr!=IA32_TSC_DEADLINE && msr != FS_BASE"
0.000 mtr-packet/30819 msr:write_msr(msr: 0x830, val: 68719479037)
0.096 :0/0 msr:read_msr(msr: IA32_TSC_ADJUST)
238.925 mtr-packet/30819 msr:write_msr(msr: 0x830, val: 8589936893)
511.010 :0/0 msr:write_msr(msr: 0x830, val: 68719479037)
1005.052 :0/0 msr:read_msr(msr: IA32_TSC_ADJUST)
1235.131 CPU 0/KVM/3750 msr:write_msr(msr: 0x830, val: 4294969595)
1235.195 CPU 0/KVM/3750 msr:read_msr(msr: IA32_SYSENTER_ESP, val: -2199023037952)
1235.201 CPU 0/KVM/3750 msr:read_msr(msr: IA32_APICBASE, val: 4276096000)
#
- Default to not using libtraceevent and its plugins for beautifying
tracepoint arguments, since now we're reusing the strace-like beatufiers.
Use --libtraceevent_print (using just --libtrace is unambiguous and can
be used as a short hand) to go back to those beautifiers.
This will help in the transition, as can be seen in some of the sched tracepoints
that still need some work in the libbeauty based mode:
# trace --no-inherit -e msr:*,*sleep,sched:* sleep 1
0.000 ( ): sched:sched_waking(comm: "trace", pid: 3319 (trace), prio: 120, success: 1)
0.006 ( ): sched:sched_wakeup(comm: "trace", pid: 3319 (trace), prio: 120, success: 1)
0.348 ( ): sched:sched_process_exec(filename: 140212596720100, pid: 3319 (sleep), old_pid: 3319 (sleep))
0.490 ( ): msr:write_msr(msr: FS_BASE, val: 139631189321088)
0.670 ( ): nanosleep(rqtp: 0x7ffc52c23bc0) ...
0.674 ( ): sched:sched_stat_runtime(comm: "sleep", pid: 3319 (sleep), runtime: 659259, vruntime: 78942418342)
0.675 ( ): sched:sched_switch(prev_comm: "sleep", prev_pid: 3319 (sleep), prev_prio: 120, prev_state: 1, next_comm: "swapper/0", next_prio: 120)
1001.059 ( ): sched:sched_waking(comm: "sleep", pid: 3319 (sleep), prio: 120, success: 1)
1001.098 ( ): sched:sched_wakeup(comm: "sleep", pid: 3319 (sleep), prio: 120, success: 1)
0.670 (1000.504 ms): ... [continued]: nanosleep()) = 0
1001.456 ( ): sched:sched_process_exit(comm: "sleep", pid: 3319 (sleep), prio: 120)
# trace --libtrace --no-inherit -e msr:*,*sleep,sched:* sleep 1
# trace --libtrace --no-inherit -e msr:*,*sleep,sched:* sleep 1
0.000 ( ): sched:sched_waking(comm=trace pid=3323 prio=120 target_cpu=000)
0.007 ( ): sched:sched_wakeup(comm=trace pid=3323 prio=120 target_cpu=000)
0.382 ( ): sched:sched_process_exec(filename=/usr/bin/sleep pid=3323 old_pid=3323)
0.525 ( ): msr:write_msr(c0000100, value 7f5d508a0580)
0.713 ( ): nanosleep(rqtp: 0x7fff487fb4a0) ...
0.717 ( ): sched:sched_stat_runtime(comm=sleep pid=3323 runtime=617722 [ns] vruntime=78957731636 [ns])
0.719 ( ): sched:sched_switch(prev_comm=sleep prev_pid=3323 prev_prio=120 prev_state=S ==> next_comm=swapper/0 next_pid=0 next_prio=120)
1001.117 ( ): sched:sched_waking(comm=sleep pid=3323 prio=120 target_cpu=000)
1001.157 ( ): sched:sched_wakeup(comm=sleep pid=3323 prio=120 target_cpu=000)
0.713 (1000.522 ms): ... [continued]: nanosleep()) = 0
1001.538 ( ): sched:sched_process_exit(comm=sleep pid=3323 prio=120)
#
- Make -v (verbose) mode be honoured for .perfconfig based trace.add_events,
to help in diagnosing problems with building eBPF events (-e source.c).
- When using eBPF syscall payload augmentation do not show strace-like
syscalls when all the user specified was some tracepoint event, bringing
the behaviour in line with that of when not using eBPF augmentation.
Intel PT:
exported-sql-viewer GUI:
Adrian Hunter:
- Add LookupModel, HBoxLayout, VBoxLayout, global time range calculations
so as to add a time chart by CPU.
perf script:
Andi Kleen:
- Allow --time (to specify a time span of interest) with --reltime
perf diff:
Jin Yao:
- Report noise for cycles diff, i.e. a histogram + stddev.
(timestamps relative to start).
perf annotate:
Arnaldo Carvalho de Melo:
- Initialize env->cpuid when running in live mode (perf top), as it
is used in some of the per arch annotation init routines.
samples bpf:
Björn Töpel:
- Fixup fallout of using tools/perf/perf-sys. from outside tools/perf.
Core:
Ian Rogers:
- Avoid 'sample_reg_masks' being const + weak, as this breaks with some
compilers that constant-propagate from the weak symbol.
libperf:
- First part of moving the perf_mmap class from tools/perf to libperf.
- Propagate CFLAGS to libperf from the tools/perf Makefile.
Vendor events:
John Garry:
- Add entry in MAINTAINERS with reviewers for the for perf tool arm64
pmu-events files.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull perf fixes from Ingo Molnar:
"Mostly tooling fixes, but also a couple of updates for new Intel
models (which are technically hw-enablement, but to users it's a fix
to perf behavior on those new CPUs - hope this is fine), an AUX
inheritance fix, event time-sharing fix, and a fix for lost non-perf
NMI events on AMD systems"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
perf/x86/cstate: Add Tiger Lake CPU support
perf/x86/msr: Add Tiger Lake CPU support
perf/x86/intel: Add Tiger Lake CPU support
perf/x86/cstate: Update C-state counters for Ice Lake
perf/x86/msr: Add new CPU model numbers for Ice Lake
perf/x86/cstate: Add Comet Lake CPU support
perf/x86/msr: Add Comet Lake CPU support
perf/x86/intel: Add Comet Lake CPU support
perf/x86/amd: Change/fix NMI latency mitigation to use a timestamp
perf/core: Fix corner case in perf_rotate_context()
perf/core: Rework memory accounting in perf_mmap()
perf/core: Fix inheritance of aux_output groups
perf annotate: Don't return -1 for error when doing BPF disassembly
perf annotate: Return appropriate error code for allocation failures
perf annotate: Fix arch specific ->init() failure errors
perf annotate: Propagate the symbol__annotate() error return
perf annotate: Fix the signedness of failure returns
perf annotate: Propagate perf_env__arch() error
perf evsel: Fall back to global 'perf_env' in perf_evsel__env()
perf tools: Propagate get_cpuid() error
...
Fix a kernel crash in spufs_create_root() on Cell machines, since the new mount
API went in.
Fix a regression in our KVM code caused by our recent PCR changes.
Avoid a warning message about a failing hypervisor API on systems that don't
have that API.
A couple of minor build fixes.
Thanks to:
Alexey Kardashevskiy, Alistair Popple, Desnes A. Nunes do Rosario, Emmanuel
Nicolet, Jordan Niethe, Laurent Dufour, Stephen Rothwell.
-----BEGIN PGP SIGNATURE-----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=jRp0
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Fix a kernel crash in spufs_create_root() on Cell machines, since the
new mount API went in.
Fix a regression in our KVM code caused by our recent PCR changes.
Avoid a warning message about a failing hypervisor API on systems that
don't have that API.
A couple of minor build fixes.
Thanks to: Alexey Kardashevskiy, Alistair Popple, Desnes A. Nunes do
Rosario, Emmanuel Nicolet, Jordan Niethe, Laurent Dufour, Stephen
Rothwell"
* tag 'powerpc-5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
spufs: fix a crash in spufs_create_root()
powerpc/kvm: Fix kvmppc_vcore->in_guest value in kvmhv_switch_to_host
selftests/powerpc: Fix compile error on tlbie_test due to newer gcc
powerpc/pseries: Remove confusing warning message.
powerpc/64s/radix: Fix build failure with RADIX_MMU=n
Alexei Starovoitov says:
====================
pull-request: bpf 2019-10-12
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) a bunch of small fixes. Nothing critical.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Andi reported that 'make DEBUG=1' does not propagate to the libbperf
code. It's true also for the other flags. Changing the code to propagate
the global build flags to libperf compilation.
Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191011122155.15738-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce the perf_evlist__filter_pollfd function and export it in the
perf/evlist.h header, so that libperf users can check if the descriptor
is still alive.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191007125344.14268-27-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a static perf_evlist__purge() function to purge evsels from a evlist.
Add also perf_evlist__for_each_entry_safe() which is used by
perf_evlist__purge().
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191007125344.14268-26-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add the perf_evlist__exit() function, so far it's not exported and added
only for internal use for perf and libperf.
USe it to release cpus/threads and pollfd array.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191007125344.14268-25-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's needed in libperf only, so move it to the perf_evlist__mmap_ops()
function.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191007125344.14268-24-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently when a new map is mmapped we set its refcnt to 2 in the
perf_evlist_mmap_ops::mmap callback.
Every mmap gets its refcnt set to 2 when it's first mmaped:
- 1 for the current user, which will be taken out by a call to
perf_evlist__munmap_filtered(), where we find out there's
no more data comming from kernel to this mmap.
- 1 for the drain code where in perf_mmap__consume() the mmap
is released if it is empty.
Move this common setup into libperf's generic code before the mmap
callback is called.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191007125344.14268-23-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Switch to the libperf mmap interface by calling directly
perf_evlist__mmap_ops() and removing perf's evlist__mmap_per_*
functions.
By switching to libperf perf_evlist__mmap() we need to operate over
'struct perf_mmap' in evlist__add_pollfd, so make the related changes
there.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191007125344.14268-22-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add the perf_evlist__mmap_cb_mmap() function to call perf specific
mmap__mmap() function during perf_evlist__mmap_ops() call.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191007125344.14268-21-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add the perf_evlist__mmap_cb_get() function to return 'struct perf_mmap'
object during perf_evlist__mmap_ops() call.
The array of 'struct mmap' is allocated via evlist__alloc_mmap(), in
this callback we simply returns pointer to the base object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191007125344.14268-20-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add perf_evlist__mmap_cb_idx function to call auxtrace_mmap_params__set_idx()
on each new index during perf_evlist__mmap_ops call.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191007125344.14268-19-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add the perf_evlist_mmap_ops::mmap callback to be called in
mmap_per_evsel() to actually mmap the map.
Add libperf's perf_evlist__mmap_cb_mmap() function as libperf's mmap
callback.
New mmaped map gets refcount set to 2 in mmap__mmap(), we follow that in
mmap callback. We will move this to common place after we switch to
perf_evlist__mmap().
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191007125344.14268-18-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add the perf_evlist_mmap_ops::get callback to be called in
mmap_per_evsel() to get/allocate the 'struct perf_mmap' object.
Add the libperf's perf_evlist__mmap_cb_get() function as libperf's get
callback.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191007125344.14268-17-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add the perf_evlist_mmap_ops::idx callback to be called in
mmap_per_cpu() and mmap_per_thread() with current cpu and thread
indexes.
It's used by current aux code, so perf will use this callback to set the
aux index.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191007125344.14268-16-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To be able to pass specific callbacks to evlist's mmap.
There will be a specific call to this function from perf's
evlist__mmap() and libperf's perf_evlist__mmap() functions in following
changes.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191007125344.14268-15-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Add libperf's version of perf_evlist__mmap()/munmap() functions and
exporting them in the perf/evlist.h header.
It's the backbone of what we have in perf code. The following changes
will add needed callbacks and then we'll finally switch the perf code to
use libperf's version.
Add mmap/mmap_ovw 'struct perf_mmap' object arrays to hold maps for
libperf's evlist.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191007125344.14268-14-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move perf_mmap__read_event() from tools/perf to libperf and export it in
the perf/mmap.h header.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191007125344.14268-13-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move perf_mmap__read_init() from tools/perf to libperf and export it in
the perf/mmap.h header.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191007125344.14268-12-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move perf_mmap__read_init() from tools/perf to libperf and export it in
perf/mmap.h header.
And add pr_debug2()/pr_debug3() macros support, because the code is
using them.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191007125344.14268-11-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move perf_mmap__consume() vrom tools/perf to libperf and export it in
the perf/mmap.h header.
Move also the needed helpers perf_mmap__write_tail(),
perf_mmap__read_head() and perf_mmap__empty().
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191007125344.14268-10-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We will move this code to libperf shortly, so we need to free it of
'struct auxtrace_mmap' usage, because it won't be available in libperf
(for now).
The perf_event_mmap_page::aux_size is set when the aux mmap is mapped,
so the check is equivalent.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191007125344.14268-9-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move perf_mmap__put() from tools/perf to libperf.
Once perf_mmap__put() is moved, we need a way to call application
related unmap code (AIO and aux related code for eprf), when the map
goes away.
Add the perf_mmap::unmap callback to do that.
The unmap path from perf is:
perf_mmap__put (libperf)
perf_mmap__munmap (libperf)
map->unmap_cb -> perf_mmap__unmap_cb (perf)
mmap__munmap (perf)
Committer notes:
Add missing linux/kernel.h to tools/perf/lib/mmap.c to get the BUG_ON
definition.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191007125344.14268-8-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move perf_mmap__unmap() from tools/perf to libperf, to internal header
internal/mmap.h. It will be used in the following patches. And rename
the existing perf's function to mmap__munmap().
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191007125344.14268-7-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move perf_mmap__get() from tools/perf to libperf in the internal header
internal/mmap.h.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191007125344.14268-6-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move perf_mmap__mmap() from tools/perf to libperf, it will be used in
the following patches. And rename the existing perf's function to
mmap__mmap().
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191007125344.14268-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move perf_mmap__mmap_len() from tools/perf wto libperf, it will be used
in the following patches. And rename the existing perf's function to
mmap__mmap_len().
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191007125344.14268-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add libperf's version of mmap params 'struct perf_mmap_param' object
with the basics: 'prot' and 'mask'. Encapsulate it in the current
'struct mmap_params' object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191007125344.14268-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add perf_mmap__init() function to initialize 'struct perf_mmap' objects.
Add it to a new mmap.c source file, that will carry all the mmap related
functions.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191007125344.14268-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Being const + weak breaks with some compilers that constant-propagate
from the weak symbol. This behavior is outside of the specification, but
in LLVM is chosen to match GCC's behavior.
LLVM's implementation was set in this patch:
f49573d1ee
A const + weak symbol is set to be weak_odr:
https://llvm.org/docs/LangRef.html
ODR is one definition rule, and given there is one constant definition
constant-propagation is possible. It is possible to get this code to
miscompile with LLVM when applying link time optimization. As compilers
become more aggressive, this is likely to break in more instances.
Move the definition of sample_reg_masks to the conditional part of
perf_regs.h and guard usage with HAVE_PERF_REGS_SUPPORT. This avoids the
weak symbol.
Fix an issue when HAVE_PERF_REGS_SUPPORT isn't defined from patch v1.
In v3, add perf_regs.c for architectures that HAVE_PERF_REGS_SUPPORT but
don't declare sample_regs_masks.
Further notes:
Jiri asked:
"Is this just a precaution or you actualy saw some breakage?"
Ian answered:
"We saw a breakage with clang with thinlto enabled for linking. Our
compiler team had recently seen, and were surprised by, a similar issue
and were able to dig out the weak ODR issue."
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: clang-built-linux@googlegroups.com
Cc: Guo Ren <guoren@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: linux-riscv@lists.infradead.org
Cc: Mao Han <han_mao@c-sky.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20191001003623.255186-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that one can try things like:
# perf trace -e msr:* --filter="msr!=FS_BASE && msr != IA32_TSC_DEADLINE && msr != 0x830 && msr != 0x83f && msr !=IA32_SPEC_CTRL" --filter-pids 3750
That, at this point in the patchset, without any strtoul in place for
tracepoint arguments, will result in:
No resolver (strtoul) for "msr" in "msr:read_msr", can't set filter "(msr!=FS_BASE && msr != IA32_TSC_DEADLINE && msr != 0x830 && msr != 0x83f && msr !=IA32_SPEC_CTRL) && (common_pid != 25407 && common_pid != 3750)"
#
See you in the next cset!
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-dx5j70fv2rgkeezd1cb3hv2p@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And also for 'struct strarray', since its needed to implement
strarrays__strtoul(). This just traverses the entries and when finding a
match, returns (offset + index), i.e. the value associated with the
searched string.
E.g. "EFER" (MSR_EFER) returns:
# grep -w EFER -B2 /tmp/build/perf/trace/beauty/generated/x86_arch_MSRs_array.c
#define x86_64_specific_MSRs_offset 0xc0000080
static const char *x86_64_specific_MSRs[] = {
[0xc0000080 - x86_64_specific_MSRs_offset] = "EFER",
#
0xc0000080
This will be auto-attached to 'struct syscall_arg_fmt' entries
associated with strarrays as soon as we add a ->strarray and ->strarrays
to 'struct syscall_arg_fmt'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-r2hpaahf8lishyb1owko9vs1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This will go from a string to a number, so that filter expressions can
be constructed with strings and then, before applying the tracepoint
filters (or eBPF, in the future) we can map those strings to numbers.
The first one will be for 'msr' tracepoint arguments, but real quickly
we will be able to reuse all strarrays for that.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-wgqq48agcgr95b8dmn6fygtr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We'll need this to support 'perf trace e tracepoint --filter=expr', as
the command line tracepoint filter is attache to the preceding evsel,
just like in 'perf record' and when we go to set pid filters, which we
do at the minimum to filter 'perf trace' own syscalls, we need to
append, not set the tp filter.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-daynpknni44ywuzi8iua57nn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Will be used by 'perf trace' to support 'perf trace --filter', we need
to append to any pre-existing filter.
When parse_filter() gets invoked to process --filter, it'll set the
filter to that specified on the command line, later on, when we filter
out 'perf trace' own pid to avoid an event feedback loop, we need to
preserve the command line filter put in place by parse_filter().
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-h9rot08qmxlnfmte0holt68x@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Will be used to append such lists to existing filters.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-798vlyqfqw938ehoe8etivx1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to wrap those autogenerated string arrays with the
strarrays__scnprintf() formatter, do it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-wqjz4kwi4a0ot6lsis3kc65j@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For instance 'msr' appears in several tracepoints, so we can associate
it with a single scnprintf() routine auto-generated from kernel headers,
as will be done in followup patches.
Start with an empty array of associations.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-89ptht6s5fez82lykuwq1eyb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This way we generate the source with the table for later use by plugins,
etc.
I.e. after running:
$ make -C tools/perf O=/tmp/build/perf
We end up with:
$ head /tmp/build/perf/trace/beauty/generated/x86_arch_MSRs_array.c
static const char *x86_MSRs[] = {
[0x00000000] = "IA32_P5_MC_ADDR",
[0x00000001] = "IA32_P5_MC_TYPE",
[0x00000010] = "IA32_TSC",
[0x00000017] = "IA32_PLATFORM_ID",
[0x0000001b] = "IA32_APICBASE",
[0x00000020] = "KNC_PERFCTR0",
[0x00000021] = "KNC_PERFCTR1",
[0x00000028] = "KNC_EVNTSEL0",
[0x00000029] = "KNC_EVNTSEL1",
$
Now its just a matter of using it, first in a libtracevent plugin.
At some point we should move tools/perf/trace/beauty to tools/beauty/,
so that it can be used more generally and even made available externally
like libbpf, libperf, libtraevent, etc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-b3rmutg4igcohx6kpo67qh4j@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need it for things like MSRs that are sparse and go over MAXINT.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-g8t2d0jr0mg3yimg2qrjkvlt@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Newer versions of GCC (>= 9) demand that the size of the string to be
copied must be explicitly smaller than the size of the destination.
Thus, the NULL char has to be taken into account on strncpy.
This will avoid the following compiling error:
tlbie_test.c: In function 'main':
tlbie_test.c:639:4: error: 'strncpy' specified bound 100 equals destination size
strncpy(logdir, optarg, LOGDIR_NAME_SIZE);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Signed-off-by: Desnes A. Nunes do Rosario <desnesn@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191003211010.9711-1-desnesn@linux.ibm.com
Out of the three nc implementations widely in use, at least two (BSD netcat
and nmap-ncat) do not support -l combined with -s. Modify the nc invocation
to be accepted by all of them.
Fixes: 17a90a7884 ("selftests/bpf: test that GSO works in lwt_ip_encap")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/9f177682c387f3f943bb64d849e6c6774df3c5b4.1570539863.git.jbenc@redhat.com
Many distributions enable rp_filter. However, the flow dissector test
generates packets that have 1.1.1.1 set as (inner) source address without
this address being reachable. This causes the selftest to fail.
The selftests should not assume a particular initial configuration. Switch
off rp_filter.
Fixes: 50b3ed57de ("selftests/bpf: test bpf flow dissection")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Petar Penkov <ppenkov@google.com>
Link: https://lore.kernel.org/bpf/513a298f53e99561d2f70b2e60e2858ea6cda754.1570539863.git.jbenc@redhat.com
This Kselftest update for Linux 5.4-rc3 consists fixes for existing
tests and the framework. Cristian Marussi's patches add ability to
skip targets (tests) and exclude tests that didn't build from run-list.
These patches improve the Kselftest results. Ability to skip targets
helps avoid running tests that aren't supported in certain environments.
As an example, bpf tests from mainline aren't supported on stable kernels
and have dependency on bleeding edge llvm. Being able to skip bpf on
systems that can't meet this llvm dependency will be helpful.
Kselftest can be built and installed from the main Makefile. This change
help simplify Kselftest use-cases which addresses request from users.
Kees Cook added per test timeout support to limit individual test run-time.
-----BEGIN PGP SIGNATURE-----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=vdrT
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
"Fixes for existing tests and the framework.
Cristian Marussi's patches add the ability to skip targets (tests) and
exclude tests that didn't build from run-list. These patches improve
the Kselftest results. Ability to skip targets helps avoid running
tests that aren't supported in certain environments. As an example,
bpf tests from mainline aren't supported on stable kernels and have
dependency on bleeding edge llvm. Being able to skip bpf on systems
that can't meet this llvm dependency will be helpful.
Kselftest can be built and installed from the main Makefile. This
change help simplify Kselftest use-cases which addresses request from
users.
Kees Cook added per test timeout support to limit individual test
run-time"
* tag 'linux-kselftest-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: watchdog: Add command line option to show watchdog_info
selftests: watchdog: Validate optional file argument
selftests/kselftest/runner.sh: Add 45 second timeout per test
kselftest: exclude failed TARGETS from runlist
kselftest: add capability to skip chosen TARGETS
selftests: Add kselftest-all and kselftest-install targets
We'll use it to generate a table and then convert the
msr:{read,write}_msr 'msr' option in things like perf trace, script,
etc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-y1f4s0y1s43d4drh7pd2huzn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So far we used the libtraceevent printing routines when showing
tracepoint arguments, but since 'perf trace' has a lot of beautifiers
for syscall arguments, and since some of those can be used to augment
tracepoint arguments, add a routine to make use of those beautifiers
and allow the user to choose which one to use.
The default now is to use the same beautifiers used for the strace-like
sys_enter+sys_exit lines, but the user can choose the libtraceevent ones
by either using the:
perf trace --libtraceevent_print
command line option, or by setting:
# cat ~/.perfconfig
[trace]
tracepoint_beautifiers = libtraceevent
For instance, here are some examples:
# perf trace -e sched:*switch,*sleep,sched:*wakeup,exit*,sched:*exit sleep 1
0.000 sched:sched_wakeup(comm: "perf", pid: 5273 (perf), prio: 120, success: 1, target_cpu: 6)
0.621 nanosleep(rqtp: 0x7ffdd06d1140, rmtp: NULL) ...
0.628 sched:sched_switch(prev_comm: "sleep", prev_pid: 5273 (sleep), prev_prio: 120, prev_state: 1, next_comm: "swapper/6", next_pid: 0, next_prio: 120)
1000.879 sched:sched_wakeup(comm: "sleep", pid: 5273 (sleep), prio: 120, success: 1, target_cpu: 6)
0.621 ... [continued]: nanosleep()) = 0
1001.026 exit_group(error_code: 0) = ?
1001.216 sched:sched_process_exit(comm: "sleep", pid: 5273 (sleep), prio: 120)
#
And then using libtraceevent, as before:
# perf trace --libtraceevent_print -e sched:*switch,*sleep,sched:*wakeup,exit*,sched:*exit sleep 1
0.000 sched:sched_wakeup(comm=perf pid=5288 prio=120 target_cpu=001)
0.739 nanosleep(rqtp: 0x7ffeba6c2f40, rmtp: NULL) ...
0.747 sched:sched_switch(prev_comm=sleep prev_pid=5288 prev_prio=120 prev_state=S ==> next_comm=swapper/1 next_pid=0 next_prio=120)
1000.902 sched:sched_wakeup(comm=sleep pid=5288 prio=120 target_cpu=001)
0.739 ... [continued]: nanosleep()) = 0
1001.012 exit_group(error_code: 0) = ?
#
The new default allocates an array of 'struct syscall_arg_fmt' for the
tracepoint arguments and, just like with syscall arguments, tries to
find suitable syscall_arg__scnprintf_NAME() routines to augment those
tracepoint arguments based on their type (as in the tracefs "format"
file), or even in their name + type, for instance arguntents with names
ending in "fd" with type "int" get the fd scnprintf beautifier attached,
etc.
Soon this will take advantage of the kernel BTF information to augment
enumerations based on the tracefs "format" type info.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-o8qdluotkcb3b1x2gjqrejcl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that they look a bit like normal strace-like syscall enter+exit
lines.
They will look even more when we switch from using libtraceevent's
tep_print_event() routine in favour of using all the perf beautifiers
used by the strace-like syscall enter+exit lines.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-y4fcej6v6u1m644nbxd2r4pg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Needed for sched's traceoints prev/next comm, where, unlike with
syscalls, we are not dealing with an integer or pointer, but an array
straight out from the ring buffer.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-rlll7tmcqe1g4odtaifil5re@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that the scnprintf beautifiers can access it, as will be the case
with the char array one in the following csets, that needs to know
the number of elements in an array.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-01qmjqv6cb1nj1qy4khdexce@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since all they operate on is on a syscall_arg_fmt instance, so move them
to allow use it from the upcoming tracepoint fprintf routine.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-ynttrs1l75f0x9tk67spd7jd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This will work similar to the syscall args, we'll allocate an array
of 'struct syscall_arg_fmt' for the tracepoint args and then init them
using the same algorithm used for the defaults for syscall args, i.e.
using its types and sometimes names as hints to find the right scnprintf
routine to beautify them from numbers into strings.
Next step is to stop using libtracevent to printf tracepoints, as we'll
have more beautifiers than int provides, modulo perhaps some plugins.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-dcl135relxvf6ljisjg13aqg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We set the default scnprint routines for the syscall args based on its
type or on heuristics based on its names, now we'll use this for
tracepoints as well, so move it out of syscall__set_arg_fmts() and into
a routine that receive just an array of syscall_arg_fmt entries + the
tracepoint format fields list.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-xs3x0zzyes06c7scdsjn01ty@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The original --reltime patch forbid --time with --reltime.
But it turns out --time doesn't really care about --reltime, because the
relative time is only used at final output, while the time filtering
always works earlier on absolute time.
So just remove the check and allow combining the two options.
Fixes: 90b10f47c0 ("perf script: Support relative time")
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20191002164642.1719-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For users of perf-sys.h outside perf, e.g. samples/bpf/bpf_load.c, it's
convenient not to depend on test_attr__*.
After commit 91854f9a07 ("perf tools: Move everything related to
sys_perf_event_open() to perf-sys.h"), all users of perf-sys.h will
depend on test_attr__enabled and test_attr__open.
This commit enables a user to define HAVE_ATTR_TEST to zero in order
to omit the test dependency.
Fixes: 91854f9a07 ("perf tools: Move everything related to sys_perf_event_open() to perf-sys.h")
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20191001113307.27796-2-bjorn.topel@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a time chart based on context switch information.
Context switch information was added to the database export fairly
recently, so the chart menu option will only appear if context switch
information is in the database.
Refer to the Exported SQL Viewer Help option for more information about
the chart.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20190821083216.1340-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Record call_time on tree nodes and re-name the misnamed "count" parameter.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20190821083216.1340-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add calculations to determine a time range that encompasses all data.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20190821083216.1340-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add LookupModel() to find a model in the model cache without creating it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20190821083216.1340-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When not using augmented syscalls, i.e. not passing thru the command
line a eBPF source or object file event that provides the
__augmented_syscalls__ BPF_MAP_TYPE_PERF_EVENT_ARRAY, etc, as with:
perf trace -e tools/perf/examples/bpf/augmented_raw_syscalls.c
or passing that augmented eBPF source/object via the trace.add_events in
.perfconfig file, we were assuming that syscalls were asked for,
differing from when not using augmented syscalls at all.
This is confusing when using .perfconfig to hide the fact we're using
the augmenter, i.e. using:
# perf trace -e sched:* sleep 1
Will show both the scheduler tracepoints and the syscalls, where what we
want is to show just the scheduler tracepoints.
To see the scheduler tracepoints and some specific syscall strace-like
formatting, one has to use:
# perf trace -e sched:*,nanosleep sleep 1
Or, if wanting all the syscalls:
# perf trace -e sched:* --syscalls sleep 1
This way 'perf trace' can be used to trace just a set of tracepoints
while allowing for mixing with strace-like when desired, by simply
adding to the mix the name of the syscalls to show in addition to the
tracepoints.
Fix it so that the behaviour using the eBPF based syscall augmenter is
the same as when not using one.
Testing:
Before this patch, with this ~/.perfconfig:
# egrep -B1 ^[[:space:]]+add_events ~/.perfconfig
[trace]
add_events = /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
#
That points to this pre-compiled eBPF syscall augmenter:
# file /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
/home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o: ELF 64-bit LSB relocatable, eBPF, version 1 (SYSV), with debug_info, not stripped
And when asking for _only_ sched:sched_switch and sched:sched_wakeup we
were unconditionally getting all the syscalls formatted strace-like:
# perf trace -e sched:*switch,sched:*wakeup sleep 1 |& tail
0.633 fstat(3, 0x7fe11d030ac0) = 0
0.635 mmap(NULL, 217750512, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fe10fec5000
0.643 close(3) = 0
0.668 nanosleep(0x7fff649a3a90, NULL) ...
0.672 sched:sched_switch:prev_comm=sleep prev_pid=4417 prev_prio=120 prev_state=S ==> next_comm=swapper/6 next_pid=0 next_prio=120
1000.822 sched:sched_wakeup:comm=sleep pid=4417 prio=120 target_cpu=006
0.668 ... [continued]: nanosleep()) = 0
1000.923 close(1) = 0
1000.941 close(2) = 0
1000.974 exit_group(0) = ?
#
After the patch:
# perf trace -e sched:*switch,sched:*wakeup sleep 1
0.000 sched:sched_wakeup:comm=perf pid=5529 prio=120 target_cpu=005
1.186 sched:sched_switch:prev_comm=sleep prev_pid=5529 prev_prio=120 prev_state=S ==> next_comm=swapper/5 next_pid=0 next_prio=120
1001.573 sched:sched_wakeup:comm=sleep pid=5529 prio=120 target_cpu=005
#
If we add the "open*" syscalls to the mix then the eBPF augmented _will_
be used and these syscalls will be traced together with the specified
sched tracepoints:
# cd /sys/kernel/debug/tracing/events/syscalls/
# ls -1d sys_enter_open*
sys_enter_open
sys_enter_openat
sys_enter_open_by_handle_at
sys_enter_open_tree
#
# perf trace -e open*,sched:*switch,sched:*wakeup sleep 1
0.000 sched:sched_wakeup:comm=perf pid=5580 prio=120 target_cpu=005
0.590 openat(AT_FDCWD, "/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
0.616 openat(AT_FDCWD, "/lib64/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
0.846 openat(AT_FDCWD, "/usr/lib/locale/locale-archive", O_RDONLY|O_CLOEXEC) = 3
0.891 sched:sched_switch:prev_comm=sleep prev_pid=5580 prev_prio=120 prev_state=S ==> next_comm=swapper/5 next_pid=0 next_prio=120
1001.005 sched:sched_wakeup:comm=sleep pid=5580 prio=120 target_cpu=005
#
And as we can see, the pathnames were collected via the eBPF augmenters.
If we don't specify anything it'll trace all syscalls:
# perf trace sleep 1 |& tail
0.299 brk(0x5597543a3000) = 0x5597543a3000
0.302 brk(NULL) = 0x5597543a3000
0.307 openat(AT_FDCWD, "/usr/lib/locale/locale-archive", O_RDONLY|O_CLOEXEC) = 3
0.313 fstat(3, 0x7feece50cac0) = 0
0.315 mmap(NULL, 217750512, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7feec13a1000
0.323 close(3) = 0
0.354 nanosleep(0x7ffe338856e0, NULL) = 0
1000.641 close(1) = 0
1000.655 close(2) = 0
1000.673 exit_group(0) = ?
#
Ditto if we don't use .perfconfig's trace.add_events but instead pass
just the augmenter as a command line event:
# vim ~/.perfconfig
# egrep -B1 ^[[:space:]]+add_events ~/.perfconfig
# perf trace -e /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o sleep 1 |& tail
0.294 brk(0x55ae08ec3000) = 0x55ae08ec3000
0.297 brk(NULL) = 0x55ae08ec3000
0.302 openat(AT_FDCWD, "/usr/lib/locale/locale-archive", O_RDONLY|O_CLOEXEC) = 3
0.309 fstat(3, 0x7f726488fac0) = 0
0.311 mmap(NULL, 217750512, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f7257724000
0.319 close(3) = 0
0.347 nanosleep(0x7ffe23643a70, NULL) = 0
1000.560 close(1) = 0
1000.575 close(2) = 0
1000.593 exit_group(0) = ?
#
As well as that + some syscall names for strace-like formatting:
# perf trace -e socket,connect,/home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o ssh localhost
0.000 socket(PF_LOCAL, SOCK_STREAM|CLOEXEC|NONBLOCK, 0) = 3
0.021 connect(3, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 110) = -1 ENOENT (No such file or directory)
0.034 socket(PF_LOCAL, SOCK_STREAM|CLOEXEC|NONBLOCK, 0) = 3
0.041 connect(3, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 110) = -1 ENOENT (No such file or directory)
0.163 socket(PF_LOCAL, SOCK_STREAM, 0) = 4
0.185 connect(4, { .family: PF_LOCAL, path: /var/lib/sss/pipes/nss }, 110) = 0
0.670 socket(PF_LOCAL, SOCK_STREAM|CLOEXEC|NONBLOCK, 0) = 7
0.684 connect(7, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 110) = -1 ENOENT (No such file or directory)
0.694 socket(PF_LOCAL, SOCK_STREAM|CLOEXEC|NONBLOCK, 0) = 7
0.701 connect(7, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 110) = -1 ENOENT (No such file or directory)
0.994 socket(PF_LOCAL, SOCK_STREAM|CLOEXEC|NONBLOCK, 0) = 5
1.006 connect(5, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 110) = -1 ENOENT (No such file or directory)
1.014 socket(PF_LOCAL, SOCK_STREAM|CLOEXEC|NONBLOCK, 0) = 5
1.022 connect(5, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 110) = -1 ENOENT (No such file or directory)
1.068 socket(PF_INET, SOCK_STREAM, IPPROTO_TCP) = 5
1.087 connect(5, { .family: PF_INET, port: 22, addr: 127.0.0.1 }, 16) = 0
24.299 socket(PF_LOCAL, SOCK_STREAM, 0) = 6
24.337 connect(6, { .family: PF_LOCAL, path: /var/run/.heim_org.h5l.kcm-socket }, 110) = 0
28.441 socket(PF_LOCAL, SOCK_STREAM, 0) = 6
28.516 connect(6, { .family: PF_LOCAL, path: /var/run/.heim_org.h5l.kcm-socket }, 110) = 0
root@localhost's password:^C
#
Everything works without augmenters:
# egrep -B1 ^[[:space:]]+add_events ~/.perfconfig
# perf trace sleep 1 |& tail
0.261 brk(0x5635068ac000) = 0x5635068ac000
0.264 brk(NULL) = 0x5635068ac000
0.268 openat(AT_FDCWD, 0xdce642a0, O_RDONLY|O_CLOEXEC) = 3
0.275 fstat(3, 0x7f3fdce97ac0) = 0
0.277 mmap(NULL, 217750512, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f3fcfd2c000
0.284 close(3) = 0
0.310 nanosleep(0x7ffdaea6ecd0, NULL) = 0
1000.552 close(1) = 0
1000.565 close(2) = 0
1000.580 exit_group(0) = ?
#
# perf trace -e connect ssh localhost
0.000 connect(3, 0x58266930, 110) = -1 ENOENT (No such file or directory)
0.022 connect(3, 0x58266af0, 110) = -1 ENOENT (No such file or directory)
0.150 connect(4, 0x58266b00, 110) = 0
0.490 connect(7, 0x58264150, 110) = -1 ENOENT (No such file or directory)
0.505 connect(7, 0x58264300, 110) = -1 ENOENT (No such file or directory)
0.832 connect(5, 0x58266220, 110) = -1 ENOENT (No such file or directory)
0.847 connect(5, 0x582663e0, 110) = -1 ENOENT (No such file or directory)
0.899 connect(5, 0x95ba0630, 16) = 0
25.619 connect(6, 0x58266360, 110) = 0
40.564 connect(6, 0x58266330, 110) = 0
root@localhost's password: ^C
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-624f6jxic04031tnt40va4dd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we add events via the '[trace]' section in perfconfig the command
line options are not yet processed, so when something goes wrong with
parsing those events and using --verbose is advised, we end up not
getting any more verbosity by doing so.
So just copy the trace.add_events string for later processing, after we
processed --verbose and the other command line options.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-d6wbnz85ftqljdll6ynjyjd8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To allow them to be used with other stuff, such as tracepoints.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-od3gzg77ppqgnnrxqv40fvgx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As this has all the things needed to format tracepoints events, not just
syscalls, that, after all, are just tracepoints with a set in stone ABI,
i.e. order and number of parameters.
For tracepoints we'll create a
static struct syscall_fmt tracepoint_fmts[]
array and will fill the ->arg[] entries with the beautifier for each
positional argument and record the name, then, when we need it, we'll
just check that the position has the same name, maybe even type, so that
we can do some check that the tracepoint hasn't changed, if it has, we
can even reorder things.
Keep calling it syscall_fmt but use it as well for tracepoints, do it
this way to minimize changes and reuse what is in place for syscalls,
we'll see.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-2x1jgiev13zt4njaanlnne0d@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Renaming it to evlist__set_default_evsel_handler(), to better reflect
what we want to do, which is to set a default handler for events we
still haven't set a custom handler, like the ones for "msr:write_msr",
etc that are coming soon.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-e1bit7upnpmtsayh8039kfuw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It all operates on the evsels in the session's evlist, so move it to the
evlist layer to make it useful to tools not using perf_session, just
evlists, like 'perf trace' in live mode.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-9oc53gnfi53vg82fvolkm85g@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Just read it so that later on the per arch init routine can use it,
e.g. x86__annotate_init().
When using a perf.data file this is obtained from a header that was put
there by 'perf record', and then it may be for another machine, another
arch.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-4t4n3o8l8s0tc2b1pq53hyr4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In 'perf top' we use that cpuid when initializing the per arch
annotation init routines (e.g. x86__annotate_init()) and in that case
(live mode, 'perf top') we need to obtain it from the running machine,
not from a perf.data file header.
Provide a means to do that. Will be used by 'perf top' in a followup
patch.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-h2wb3sx7u7znx6lqfezrh7ca@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf script:
Andi Kleen:
- Fix recovery from LBR/binary mismatch in the "brstackinsn" --field.
perf annotate:
Arnaldo Carvalho de Melo:
- Propagate errors so that meaningful messages can be presented to the
user in case of problems.
perf map:
Steve MacLean:
- Fix handling of maps partially overlapped, resolving symbols in the
ranges not replaced by new mmaps.
perf tests:
Ian Rogers:
- Use raise() instead of NULL derefs to avoid causing a SIGILL rather than a
SIGSEGV for optimized builds that turn NULL derefs into ud2 instructions.
perf LLVM:
Ian Rogers:
- Don't access out-of-scope array.
perf inject:
Steve MacLean:
- Fix JIT_CODE_MOVE filename, that was having a u64 truncaded into a 32-bit
snprintf format and also a missing ".so" suffix in another case.
libsubcmd:
Ian Rogers:
- Make _FORTIFY_SOURCE defines dependent on the feature, avoiding
false positives with with memory sanitizers such as LLVM's ASan.
Vendor specific events:
Intel:
Andi Kleen:
- Fix period for Intel fixed counters.
s390:
Thomas Richter (2):
- Fix some event details transaction for machine type 8561.
tools headers UAPI:
Arnaldo Carvalho de Melo:
- Sync headers with the kernel, catching new usbdevfs ioctls and
madvise behaviours to properly decode in 'perf trace' output.
Documentation:
Steve MacLean:
- Correct and clarify jitdump spec.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXZMyWQAKCRCyPKLppCJ+
Jz0qAQC9lZQrWR+Q5S1rXbp5x45+mIji7Q8UK5pyzhpLRAOYNwD/cR6v6TCE96lE
a2hCqV+gV+pbc70Bw5H7TN+kVOtGaQE=
=wcfs
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo-5.4-20191001' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
perf script:
Andi Kleen:
- Fix recovery from LBR/binary mismatch in the "brstackinsn" --field.
perf annotate:
Arnaldo Carvalho de Melo:
- Propagate errors so that meaningful messages can be presented to the
user in case of problems.
perf map:
Steve MacLean:
- Fix handling of maps partially overlapped, resolving symbols in the
ranges not replaced by new mmaps.
perf tests:
Ian Rogers:
- Use raise() instead of NULL derefs to avoid causing a SIGILL rather than a
SIGSEGV for optimized builds that turn NULL derefs into ud2 instructions.
perf LLVM:
Ian Rogers:
- Don't access out-of-scope array.
perf inject:
Steve MacLean:
- Fix JIT_CODE_MOVE filename, that was having a u64 truncaded into a 32-bit
snprintf format and also a missing ".so" suffix in another case.
libsubcmd:
Ian Rogers:
- Make _FORTIFY_SOURCE defines dependent on the feature, avoiding
false positives with with memory sanitizers such as LLVM's ASan.
Vendor specific events:
Intel:
Andi Kleen:
- Fix period for Intel fixed counters.
s390:
Thomas Richter (2):
- Fix some event details transaction for machine type 8561.
tools headers UAPI:
Arnaldo Carvalho de Melo:
- Sync headers with the kernel, catching new usbdevfs ioctls and
madvise behaviours to properly decode in 'perf trace' output.
Documentation:
Steve MacLean:
- Correct and clarify jitdump spec.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull networking fixes from David Miller:
1) Fix ieeeu02154 atusb driver use-after-free, from Johan Hovold.
2) Need to validate TCA_CBQ_WRROPT netlink attributes, from Eric
Dumazet.
3) txq null deref in mac80211, from Miaoqing Pan.
4) ionic driver needs to select NET_DEVLINK, from Arnd Bergmann.
5) Need to disable bh during nft_connlimit GC, from Pablo Neira Ayuso.
6) Avoid division by zero in taprio scheduler, from Vladimir Oltean.
7) Various xgmac fixes in stmmac driver from Jose Abreu.
8) Avoid 64-bit division in mlx5 leading to link errors on 32-bit from
Michal Kubecek.
9) Fix bad VLAN check in rtl8366 DSA driver, from Linus Walleij.
10) Fix sleep while atomic in sja1105, from Vladimir Oltean.
11) Suspend/resume deadlock in stmmac, from Thierry Reding.
12) Various UDP GSO fixes from Josh Hunt.
13) Fix slab out of bounds access in tcp_zerocopy_receive(), from Eric
Dumazet.
14) Fix OOPS in __ipv6_ifa_notify(), from David Ahern.
15) Memory leak in NFC's llcp_sock_bind, from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
selftests/net: add nettest to .gitignore
net: qlogic: Fix memory leak in ql_alloc_large_buffers
nfc: fix memory leak in llcp_sock_bind()
sch_dsmark: fix potential NULL deref in dsmark_init()
net: phy: at803x: use operating parameters from PHY-specific status
net: phy: extract pause mode
net: phy: extract link partner advertisement reading
net: phy: fix write to mii-ctrl1000 register
ipv6: Handle missing host route in __ipv6_ifa_notify
net: phy: allow for reset line to be tied to a sleepy GPIO controller
net: ipv4: avoid mixed n_redirects and rate_tokens usage
r8152: Set macpassthru in reset_resume callback
cxgb4:Fix out-of-bounds MSI-X info array access
Revert "ipv6: Handle race in addrconf_dad_work"
net: make sock_prot_memory_pressure() return "const char *"
rxrpc: Fix rxrpc_recvmsg tracepoint
qmi_wwan: add support for Cinterion CLS8 devices
tcp: fix slab-out-of-bounds in tcp_zerocopy_receive()
lib: textsearch: fix escapes in example code
udp: only do GSO if # of segs > 1
...
nettest is missing from gitignore.
Fixes: acda655fef ("selftests: Add nettest")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
a nested hypervisor has always been busted on Broadwell and newer processors,
and that has finally been fixed.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJdlzTRAAoJEL/70l94x66DElcH/Rvhn5VQE/n2J+tKEXAICxQu
FqcTBJ5x2mp04aFe7xD3kWoKRJmz2lmHdw2ahFd4sqqLfGEFF/KW24ADI33vzLx/
UmT78O0Je3PX77TRnEXy+napbJny0iT6ikTAQKPbyQ151JlqlbPvatpDXXLPWQHv
jj6nKHCvMBrhV3kgaXO3cTFl8swX1hvR9lo9PcA2gRNt+HMN0heUmpfKughPoOes
JH+UNjsEr7MYlXYlIIc9o71EYH+kgPObwlLejy0ture+dvvZEJUJjZJE8H/XG5f2
ryXG9favaCOTAvaGf0R5Es+47A3crqUr6gHS0N28QKPn7x4hehIkKpA9dXQnWIw=
=1/LN
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"ARM and x86 bugfixes of all kinds.
The most visible one is that migrating a nested hypervisor has always
been busted on Broadwell and newer processors, and that has finally
been fixed"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (22 commits)
KVM: x86: omit "impossible" pmu MSRs from MSR list
KVM: nVMX: Fix consistency check on injected exception error code
KVM: x86: omit absent pmu MSRs from MSR list
selftests: kvm: Fix libkvm build error
kvm: vmx: Limit guest PMCs to those supported on the host
kvm: x86, powerpc: do not allow clearing largepages debugfs entry
KVM: selftests: x86: clarify what is reported on KVM_GET_MSRS failure
KVM: VMX: Set VMENTER_L1D_FLUSH_NOT_REQUIRED if !X86_BUG_L1TF
selftests: kvm: add test for dirty logging inside nested guests
KVM: x86: fix nested guest live migration with PML
KVM: x86: assign two bits to track SPTE kinds
KVM: x86: Expose XSAVEERPTR to the guest
kvm: x86: Enumerate support for CLZERO instruction
kvm: x86: Use AMD CPUID semantics for AMD vCPUs
kvm: x86: Improve emulation of CPUID leaves 0BH and 1FH
KVM: X86: Fix userspace set invalid CR4
kvm: x86: Fix a spurious -E2BIG in __do_cpuid_func
KVM: LAPIC: Loosen filter for adaptive tuning of lapic_timer_advance_ns
KVM: arm/arm64: vgic: Use the appropriate TRACE_INCLUDE_PATH
arm64: KVM: Kill hyp_alternate_select()
...
Prior to this change an application sending <= 1MSS worth of data and
enabling UDP GSO would fail if the system had SW GSO enabled, but the
same send would succeed if HW GSO offload is enabled. In addition to this
inconsistency the error in the SW GSO case does not get back to the
application if sending out of a real device so the user is unaware of this
failure.
With this change we only perform GSO if the # of segments is > 1 even
if the application has enabled segmentation. I've also updated the
relevant udpgso selftests.
Fixes: bec1f6f697 ("udp: generate gso with UDP_SEGMENT")
Signed-off-by: Josh Hunt <johunt@akamai.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the following build error from "make TARGETS=kvm kselftest":
libkvm.a(assert.o): relocation R_X86_64_32 against `.rodata.str1.1' can not be used when making a PIE object; recompile with -fPIC
This error is seen when build is done from the main Makefile using
kselftest target. In this case KBUILD_CPPFLAGS and CC_OPTION_CFLAGS
are defined.
When build is invoked using:
"make -C tools/testing/selftests/kvm" KBUILD_CPPFLAGS and CC_OPTION_CFLAGS
aren't defined.
There is no need to pass in KBUILD_CPPFLAGS and CC_OPTION_CFLAGS for the
check to determine if --no-pie is necessary, which is the case when these
two aren't defined when "make -C tools/testing/selftests/kvm" runs.
Fix it by simplifying the no-pie-option logic. With this change, both
build variations work.
"make TARGETS=kvm kselftest"
"make -C tools/testing/selftests/kvm"
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With the new ioctl(WDIOC_GETSUPPORT) call in place, add a command
line option to show the watchdog_info.
Suggested-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Signed-off-by: George G. Davis <george_davis@mentor.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The newly added optional file argument does not validate if the
file is indeed a watchdog, e.g.:
./watchdog-test -f /dev/zero
Watchdog Ticking Away!
Fix it by confirming that the WDIOC_GETSUPPORT ioctl succeeds.
Fixes: a4864a33f5 ("selftests: watchdog: Add optional file argument")
Reported-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Signed-off-by: George G. Davis <george_davis@mentor.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
server_fd needs to be closed if pthread can't be created.
Fixes: e3e02e1d9c ("selftests/bpf: test_progs: convert test_sockopt_inherit")
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20191001173728.149786-3-brianvv@google.com
server_fd needs to be closed if pthread can't be created.
Fixes: 8a03222f50 ("selftests/bpf: test_progs: fix client/server race in tcp_rtt")
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20191001173728.149786-2-brianvv@google.com
Commit a745f7af3c ("selftests/harness: Add 30 second timeout per
test") solves the problem of kselftest_harness.h-using binary tests
possibly hanging forever. However, scripts and other binaries can still
hang forever. This adds a global timeout to each test script run.
To make this configurable (e.g. as needed in the "rtc" test case),
include a new per-test-directory "settings" file (similar to "config")
that can contain kselftest-specific settings. The first recognized field
is "timeout".
Additionally, this splits the reporting for timeouts into a specific
"TIMEOUT" not-ok (and adds exit code reporting in the remaining case).
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
A TARGET which failed to be built/installed should not be included in the
runlist generated inside the run_kselftest.sh script.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Let the user specify an optional TARGETS skiplist through the new optional
SKIP_TARGETS Makefile variable.
It is easier to skip at will using a reduced and well defined list of
possibly problematic targets with SKIP_TARGETS than to provide a partially
stripped down list of good targets using the usual TARGETS variable.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add kselftest-all target to build tests from the top level
Makefile. This is to simplify kselftest use-cases for CI and
distributions where build and test systems are different.
Current kselftest target builds and runs tests on a development
system which is a developer use-case.
Add kselftest-install target to install tests from the top level
Makefile. This is to simplify kselftest use-cases for CI and
distributions where build and test systems are different.
This change addresses requests from developers and testers to add
support for installing kselftest from the main Makefile.
In addition, make the install directory the same when install is
run using "make kselftest-install" or by running kselftest_install.sh.
Also fix the INSTALL_PATH variable conflict between main Makefile and
selftests Makefile.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
bcc uses libbpf repo as a submodule. It brings in libbpf source
code and builds everything together to produce shared libraries.
With latest libbpf, I got the following errors:
/bin/ld: libbcc_bpf.so.0.10.0: version node not found for symbol xsk_umem__create@LIBBPF_0.0.2
/bin/ld: failed to set dynamic section sizes: Bad value
collect2: error: ld returned 1 exit status
make[2]: *** [src/cc/libbcc_bpf.so.0.10.0] Error 1
In xsk.c, we have
asm(".symver xsk_umem__create_v0_0_2, xsk_umem__create@LIBBPF_0.0.2");
asm(".symver xsk_umem__create_v0_0_4, xsk_umem__create@@LIBBPF_0.0.4");
The linker thinks the built is for LIBBPF but cannot find proper version
LIBBPF_0.0.2/4, so emit errors.
I also confirmed that using libbpf.a to produce a shared library also
has issues:
-bash-4.4$ cat t.c
extern void *xsk_umem__create;
void * test() { return xsk_umem__create; }
-bash-4.4$ gcc -c -fPIC t.c
-bash-4.4$ gcc -shared t.o libbpf.a -o t.so
/bin/ld: t.so: version node not found for symbol xsk_umem__create@LIBBPF_0.0.2
/bin/ld: failed to set dynamic section sizes: Bad value
collect2: error: ld returned 1 exit status
-bash-4.4$
Symbol versioning does happens in commonly used libraries, e.g., elfutils
and glibc. For static libraries, for a versioned symbol, the old definitions
will be ignored, and the symbol will be an alias to the latest definition.
For example, glibc sched_setaffinity is versioned.
-bash-4.4$ readelf -s /usr/lib64/libc.so.6 | grep sched_setaffinity
756: 000000000013d3d0 13 FUNC GLOBAL DEFAULT 13 sched_setaffinity@GLIBC_2.3.3
757: 00000000000e2e70 455 FUNC GLOBAL DEFAULT 13 sched_setaffinity@@GLIBC_2.3.4
1800: 0000000000000000 0 FILE LOCAL DEFAULT ABS sched_setaffinity.c
4228: 00000000000e2e70 455 FUNC LOCAL DEFAULT 13 __sched_setaffinity_new
4648: 000000000013d3d0 13 FUNC LOCAL DEFAULT 13 __sched_setaffinity_old
7338: 000000000013d3d0 13 FUNC GLOBAL DEFAULT 13 sched_setaffinity@GLIBC_2
7380: 00000000000e2e70 455 FUNC GLOBAL DEFAULT 13 sched_setaffinity@@GLIBC_
-bash-4.4$
For static library, the definition of sched_setaffinity aliases to the new definition.
-bash-4.4$ readelf -s /usr/lib64/libc.a | grep sched_setaffinity
File: /usr/lib64/libc.a(sched_setaffinity.o)
8: 0000000000000000 455 FUNC GLOBAL DEFAULT 1 __sched_setaffinity_new
12: 0000000000000000 455 FUNC WEAK DEFAULT 1 sched_setaffinity
For both elfutils and glibc, additional macros are used to control different handling
of symbol versioning w.r.t static and shared libraries.
For elfutils, the macro is SYMBOL_VERSIONING
(https://sourceware.org/git/?p=elfutils.git;a=blob;f=lib/eu-config.h).
For glibc, the macro is SHARED
(https://sourceware.org/git/?p=glibc.git;a=blob;f=include/shlib-compat.h;hb=refs/heads/master)
This patch used SHARED as the macro name. After this patch, the libbpf.a has
-bash-4.4$ readelf -s libbpf.a | grep xsk_umem__create
372: 0000000000017145 1190 FUNC GLOBAL DEFAULT 1 xsk_umem__create_v0_0_4
405: 0000000000017145 1190 FUNC GLOBAL DEFAULT 1 xsk_umem__create
499: 00000000000175eb 103 FUNC GLOBAL DEFAULT 1 xsk_umem__create_v0_0_2
-bash-4.4$
No versioned symbols for xsk_umem__create.
The libbpf.a can be used to build a shared library succesfully.
-bash-4.4$ cat t.c
extern void *xsk_umem__create;
void * test() { return xsk_umem__create; }
-bash-4.4$ gcc -c -fPIC t.c
-bash-4.4$ gcc -shared t.o libbpf.a -o t.so
-bash-4.4$
Fixes: 10d30e3017 ("libbpf: add flags to umem config")
Cc: Kevin Laatz <kevin.laatz@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Return errno when open_memstream() fails and add two new speciall error
codes for when an invalid, non BPF file or one without BTF is passed to
symbol__disassemble_bpf(), so that its callers can rely on
symbol__strerror_disassemble() to convert that to a human readable error
message that can help figure out what is wrong, with hints even.
Cc: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Song Liu <songliubraving@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>,
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/n/tip-usevw9r2gcipfcrbpaueurw0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We should return errno or the annotation extra range understood by
symbol__strerror_disassemble() instead of -1, fix it, returning ENOMEM
instead.
Reported-by: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>,
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/n/tip-8of1cmj3rz0mppfcshc9bbqq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
They are called from symbol__annotate() and to propagate errors that can
help understand the problem make them return what
symbol__strerror_disassemble() known, i.e. errno codes and other
annotation specific errors in a special, out of errnos, range.
Reported-by: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>,
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/n/tip-pqx7srcv7tixgid251aeboj6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were just returning -1 in symbol__annotate() when symbol__annotate()
failed, propagate its error as it is used later to pass to
symbol__strerror_disassemble() to present a error message to the user,
that in some cases were getting:
"Invalid -1 error code"
Fix it to propagate the error.
Reported-by: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>,
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/n/tip-0tj89rs9g7nbcyd5skadlvuu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Callers of symbol__annotate() expect a errno value or some other
extended error value range in symbol__strerror_disassemble() to
convert to a proper error string, fix it when propagating a failure to
find the arch specific annotation routines via arch__find(arch_name).
Reported-by: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>,
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/n/tip-o0k6dw7cas0vvmjjvgsyvu1i@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The callers of symbol__annotate2() use symbol__strerror_disassemble() to
convert its failure returns into a human readable string, so
propagate error values from functions it calls, starting with
perf_env__arch() that when fails the right thing to do is to look at
'errno' to see why its possible call to uname() failed.
Reported-by: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>,
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/n/tip-it5d83kyusfhb1q1b0l4pxzs@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I.e. if evsel->evlist or evsel->evlist->env isn't set, return the
environment for the running machine, as that would be set if reading
from a perf.data file.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-uqq4grmhbi12rwb0lfpo6lfu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For consistency, propagate the exact cause for get_cpuid() to have
failed.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-9ig269f7ktnhh99g4l15vpu2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The Intel fixed counters use a special table to override the JSON
information.
During this override the period information from the JSON file got
dropped, which results in inst_retired.any and similar running with
frequency mode instead of a period.
Just specify the expected period in the table.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20190927233546.11533-2-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the LBR data and the instructions in a binary do not match the loop
printing instructions could get confused and print a long stream of
bogus <bad> instructions.
The problem was that if the instruction decoder cannot decode an
instruction it ilen wasn't initialized, so the loop going through the
basic block would continue with the previous value.
Harden the code to avoid such problems:
- Make sure ilen is always freshly initialized and is 0 for bad
instructions.
- Do not overrun the code buffer while printing instructions
- Print a warning message if the final jump is not on an instruction
boundary.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20190927233546.11533-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Specification claims latest version of jitdump file format is 2. Current
jit dump reading code treats 1 as the latest version.
Correct spec to match code.
The original language made it unclear the value to be written in the
magic field.
Revise language that the writer always writes the same value. Specify
that the reader uses the value to detect endian mismatches.
Signed-off-by: Steve MacLean <Steve.MacLean@Microsoft.com>
Acked-by: Stephane Eranian <eranian@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Brian Robbins <brianrob@microsoft.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Eric Saint-Etienne <eric.saint.etienne@oracle.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Keeping <john@metanate.com>
Cc: John Salem <josalem@microsoft.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Tom McDonald <thomas.mcdonald@microsoft.com>
Link: http://lore.kernel.org/lkml/BN8PR21MB1362F63CDE7AC69736FC7F9EF7800@BN8PR21MB1362.namprd21.prod.outlook.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
During perf inject --jit, JIT_CODE_MOVE records were injecting MMAP records
with an incorrect filename. Specifically it was missing the ".so" suffix.
Further the JIT_CODE_LOAD record were silently truncating the
jr->load.code_index field to 32 bits before generating the filename.
Make both records emit the same filename based on the full 64 bit
code_index field.
Fixes: 9b07e27f88 ("perf inject: Add jitdump mmap injection support")
Cc: stable@vger.kernel.org # v4.6+
Signed-off-by: Steve MacLean <Steve.MacLean@Microsoft.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Brian Robbins <brianrob@microsoft.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Eric Saint-Etienne <eric.saint.etienne@oracle.com>
Cc: John Keeping <john@metanate.com>
Cc: John Salem <josalem@microsoft.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom McDonald <thomas.mcdonald@microsoft.com>
Link: http://lore.kernel.org/lkml/BN8PR21MB1362FF8F127B31DBF4121528F7800@BN8PR21MB1362.namprd21.prod.outlook.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Whenever an mmap/mmap2 event occurs, the map tree must be updated to add a new
entry. If a new map overlaps a previous map, the overlapped section of the
previous map is effectively unmapped, but the non-overlapping sections are
still valid.
maps__fixup_overlappings() is responsible for creating any new map entries from
the previously overlapped map. It optionally creates a before and an after map.
When creating the after map the existing code failed to adjust the map.pgoff.
This meant the new after map would incorrectly calculate the file offset
for the ip. This results in incorrect symbol name resolution for any ip in the
after region.
Make maps__fixup_overlappings() correctly populate map.pgoff.
Add an assert that new mapping matches old mapping at the beginning of
the after map.
Committer-testing:
Validated correct parsing of libcoreclr.so symbols from .NET Core 3.0 preview9
(which didn't strip symbols).
Preparation:
~/dotnet3.0-preview9/dotnet new webapi -o perfSymbol
cd perfSymbol
~/dotnet3.0-preview9/dotnet publish
perf record ~/dotnet3.0-preview9/dotnet \
bin/Debug/netcoreapp3.0/publish/perfSymbol.dll
^C
Before:
perf script --show-mmap-events 2>&1 | grep -e MMAP -e unknown |\
grep libcoreclr.so | head -n 4
dotnet 1907 373352.698780: PERF_RECORD_MMAP2 1907/1907: \
[0x7fe615726000(0x768000) @ 0 08:02 5510620 765057155]: \
r-xp .../3.0.0-preview9-19423-09/libcoreclr.so
dotnet 1907 373352.701091: PERF_RECORD_MMAP2 1907/1907: \
[0x7fe615974000(0x1000) @ 0x24e000 08:02 5510620 765057155]: \
rwxp .../3.0.0-preview9-19423-09/libcoreclr.so
dotnet 1907 373352.701241: PERF_RECORD_MMAP2 1907/1907: \
[0x7fe615c42000(0x1000) @ 0x51c000 08:02 5510620 765057155]: \
rwxp .../3.0.0-preview9-19423-09/libcoreclr.so
dotnet 1907 373352.705249: 250000 cpu-clock: \
7fe6159a1f99 [unknown] \
(.../3.0.0-preview9-19423-09/libcoreclr.so)
After:
perf script --show-mmap-events 2>&1 | grep -e MMAP -e unknown |\
grep libcoreclr.so | head -n 4
dotnet 1907 373352.698780: PERF_RECORD_MMAP2 1907/1907: \
[0x7fe615726000(0x768000) @ 0 08:02 5510620 765057155]: \
r-xp .../3.0.0-preview9-19423-09/libcoreclr.so
dotnet 1907 373352.701091: PERF_RECORD_MMAP2 1907/1907: \
[0x7fe615974000(0x1000) @ 0x24e000 08:02 5510620 765057155]: \
rwxp .../3.0.0-preview9-19423-09/libcoreclr.so
dotnet 1907 373352.701241: PERF_RECORD_MMAP2 1907/1907: \
[0x7fe615c42000(0x1000) @ 0x51c000 08:02 5510620 765057155]: \
rwxp .../3.0.0-preview9-19423-09/libcoreclr.so
All the [unknown] symbols were resolved.
Signed-off-by: Steve MacLean <Steve.MacLean@Microsoft.com>
Tested-by: Brian Robbins <brianrob@microsoft.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Eric Saint-Etienne <eric.saint.etienne@oracle.com>
Cc: John Keeping <john@metanate.com>
Cc: John Salem <josalem@microsoft.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom McDonald <thomas.mcdonald@microsoft.com>
Link: http://lore.kernel.org/lkml/BN8PR21MB136270949F22A6A02335C238F7800@BN8PR21MB1362.namprd21.prod.outlook.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In the pmu-events directory for JSON file definitions use the
official machine name IBM z15 instead of machine type number
8561. This is consistent with previous machines.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20190927081147.18345-2-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add s390 transaction counter definition for machine 8561. This is the
same file as for the predecessor machine.
Fixes: 6e67d77d67 ("perf vendor events s390: Add JSON files for machine type 8561")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20190927081147.18345-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'test_dir' variable is assigned to the 'release' array which is
out-of-scope 3 lines later.
Extend the scope of the 'release' array so that an out-of-scope array
isn't accessed.
Bug detected by clang's address sanitizer.
Fixes: 07bc5c699a ("perf tools: Make fetch_kernel_version() publicly available")
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lore.kernel.org/lkml/20190926220018.25402-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes in:
200824f55e ("KVM: s390: Disallow invalid bits in kvm_valid_regs and kvm_dirty_regs")
4a53d99dd0 ("KVM: VMX: Introduce exit reason for receiving INIT signal on guest-mode")
7396d337cf ("KVM: x86: Return to userspace with internal error on unexpected exit reason")
92f35b751c ("KVM: arm/arm64: vgic: Allow more than 256 vcpus for KVM_IRQ_LINE")
None of them trigger any changes in tooling, this time this is just to silence
these perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/vmx.h' differs from latest version at 'arch/x86/include/uapi/asm/vmx.h'
diff -u tools/arch/x86/include/uapi/asm/vmx.h arch/x86/include/uapi/asm/vmx.h
Warning: Kernel ABI header at 'tools/arch/s390/include/uapi/asm/kvm.h' differs from latest version at 'arch/s390/include/uapi/asm/kvm.h'
diff -u tools/arch/s390/include/uapi/asm/kvm.h arch/s390/include/uapi/asm/kvm.h
Warning: Kernel ABI header at 'tools/arch/arm/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm/include/uapi/asm/kvm.h'
diff -u tools/arch/arm/include/uapi/asm/kvm.h arch/arm/include/uapi/asm/kvm.h
Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h'
diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Liran Alon <liran.alon@oracle.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Link: https://lkml.kernel.org/n/tip-akuugvvjxte26kzv23zp5d2z@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes from:
78a1b96bcf ("fscrypt: add FS_IOC_REMOVE_ENCRYPTION_KEY_ALL_USERS ioctl")
23c688b540 ("fscrypt: allow unprivileged users to add/remove keys for v2 policies")
5dae460c22 ("fscrypt: v2 encryption policy support")
5a7e29924d ("fscrypt: add FS_IOC_GET_ENCRYPTION_KEY_STATUS ioctl")
b1c0ec3599 ("fscrypt: add FS_IOC_REMOVE_ENCRYPTION_KEY ioctl")
22d94f493b ("fscrypt: add FS_IOC_ADD_ENCRYPTION_KEY ioctl")
3b6df59bc4 ("fscrypt: use FSCRYPT_* definitions, not FS_*")
2336d0deb2 ("fscrypt: use FSCRYPT_ prefix for uapi constants")
7af0ab0d3a ("fs, fscrypt: move uapi definitions to new header <linux/fscrypt.h>")
That don't trigger any changes in tooling, as it so far is used only
for:
$ grep -l 'fs\.h' tools/perf/trace/beauty/*.sh | xargs grep regex=
tools/perf/trace/beauty/rename_flags.sh:regex='^[[:space:]]*#[[:space:]]*define[[:space:]]+RENAME_([[:alnum:]_]+)[[:space:]]+\(1[[:space:]]*<<[[:space:]]*([[:xdigit:]]+)[[:space:]]*\)[[:space:]]*.*'
tools/perf/trace/beauty/sync_file_range.sh:regex='^[[:space:]]*#[[:space:]]*define[[:space:]]+SYNC_FILE_RANGE_([[:alnum:]_]+)[[:space:]]+([[:xdigit:]]+)[[:space:]]*.*'
tools/perf/trace/beauty/usbdevfs_ioctl.sh:regex="^#[[:space:]]*define[[:space:]]+USBDEVFS_(\w+)(\(\w+\))?[[:space:]]+_IO[CWR]{0,2}\([[:space:]]*(_IOC_\w+,[[:space:]]*)?'U'[[:space:]]*,[[:space:]]*([[:digit:]]+).*"
tools/perf/trace/beauty/usbdevfs_ioctl.sh:regex="^#[[:space:]]*define[[:space:]]+USBDEVFS_(\w+)[[:space:]]+_IO[WR]{0,2}\([[:space:]]*'U'[[:space:]]*,[[:space:]]*([[:digit:]]+).*"
$
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/fs.h' differs from latest version at 'include/uapi/linux/fs.h'
diff -u tools/include/uapi/linux/fs.h include/uapi/linux/fs.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-44g48exl9br9ba0t64chqb4i@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the changes from:
4ed3350539 ("USB: usbfs: Add a capability flag for runtime suspend")
7794f486ed ("usbfs: Add ioctls for runtime power management")
This triggers these changes in the kernel sources, automagically
supporting these new ioctls in the 'perf trace' beautifiers.
Soon this will be used in things like filter expressions for tracepoints
in 'perf record', 'perf trace', 'perf top', i.e. filter expressions will
do a lookup to turn things like USBDEVFS_WAIT_FOR_RESUME into _IO('U',
35) before associating the tracepoint expression to tracepoint perf
event.
$ tools/perf/trace/beauty/usbdevfs_ioctl.sh > before
$ cp include/uapi/linux/usbdevice_fs.h tools/include/uapi/linux/usbdevice_fs.h
$ git diff
diff --git a/tools/include/uapi/linux/usbdevice_fs.h b/tools/include/uapi/linux/usbdevice_fs.h
index 78efe870c2b7..cf525cddeb94 100644
--- a/tools/include/uapi/linux/usbdevice_fs.h
+++ b/tools/include/uapi/linux/usbdevice_fs.h
@@ -158,6 +158,7 @@ struct usbdevfs_hub_portinfo {
#define USBDEVFS_CAP_MMAP 0x20
#define USBDEVFS_CAP_DROP_PRIVILEGES 0x40
#define USBDEVFS_CAP_CONNINFO_EX 0x80
+#define USBDEVFS_CAP_SUSPEND 0x100
/* USBDEVFS_DISCONNECT_CLAIM flags & struct */
@@ -223,5 +224,8 @@ struct usbdevfs_streams {
* extending size of the data returned.
*/
#define USBDEVFS_CONNINFO_EX(len) _IOC(_IOC_READ, 'U', 32, len)
+#define USBDEVFS_FORBID_SUSPEND _IO('U', 33)
+#define USBDEVFS_ALLOW_SUSPEND _IO('U', 34)
+#define USBDEVFS_WAIT_FOR_RESUME _IO('U', 35)
#endif /* _UAPI_LINUX_USBDEVICE_FS_H */
$ tools/perf/trace/beauty/usbdevfs_ioctl.sh > after
$ diff -u before after
--- before 2019-09-27 11:41:50.634867620 -0300
+++ after 2019-09-27 11:42:07.453102978 -0300
@@ -24,6 +24,9 @@
[30] = "DROP_PRIVILEGES",
[31] = "GET_SPEED",
[32] = "CONNINFO_EX",
+ [33] = "FORBID_SUSPEND",
+ [34] = "ALLOW_SUSPEND",
+ [35] = "WAIT_FOR_RESUME",
[3] = "RESETEP",
[4] = "SETINTERFACE",
[5] = "SETCONFIGURATION",
$
This addresses the following perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/usbdevice_fs.h' differs from latest version at 'include/uapi/linux/usbdevice_fs.h'
diff -u tools/include/uapi/linux/usbdevice_fs.h include/uapi/linux/usbdevice_fs.h
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-x1rb109b9nfi7pukota82xhj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes from:
1a4e58cce8 ("mm: introduce MADV_PAGEOUT")
9c276cc65a ("mm: introduce MADV_COLD")
That result in these changes in the tools:
$ tools/perf/trace/beauty/madvise_behavior.sh > before
$ cp include/uapi/asm-generic/mman-common.h tools/include/uapi/asm-generic/mman-common.h
$ git diff
diff --git a/tools/include/uapi/asm-generic/mman-common.h b/tools/include/uapi/asm-generic/mman-common.h
index 63b1f506ea67..c160a5354eb6 100644
--- a/tools/include/uapi/asm-generic/mman-common.h
+++ b/tools/include/uapi/asm-generic/mman-common.h
@@ -67,6 +67,9 @@
#define MADV_WIPEONFORK 18 /* Zero memory on fork, child only */
#define MADV_KEEPONFORK 19 /* Undo MADV_WIPEONFORK */
+#define MADV_COLD 20 /* deactivate these pages */
+#define MADV_PAGEOUT 21 /* reclaim these pages */
+
/* compatibility flags */
#define MAP_FILE 0
$ tools/perf/trace/beauty/madvise_behavior.sh > after
$ diff -u before after
--- before 2019-09-27 11:29:43.346320100 -0300
+++ after 2019-09-27 11:30:03.838570439 -0300
@@ -16,6 +16,8 @@
[17] = "DODUMP",
[18] = "WIPEONFORK",
[19] = "KEEPONFORK",
+ [20] = "COLD",
+ [21] = "PAGEOUT",
[100] = "HWPOISON",
[101] = "SOFT_OFFLINE",
};
$
I.e. now when madvise gets those behaviours as args, it will be able to
translate from the number to a human readable string.
This addresses the following perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/mman-common.h' differs from latest version at 'include/uapi/asm-generic/mman-common.h'
diff -u tools/include/uapi/asm-generic/mman-common.h include/uapi/asm-generic/mman-common.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-n40y6c4sa49p29q6sl8w3ufx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
- Fixed a buffer overflow by checking nr_args correctly in probes
- Fixed a warning that is reported by clang
- Fixed a possible memory leak in error path of filter processing
- Fixed the selftest that checks for failures, but wasn't failing
- Minor clean up on call site output of a memory trace event
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXZEP5hQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qhrSAQDlws8rY/vJN4tKL1YaBTRyS5OW+1B+
LPLOxm9PBuzt0wEArVunv7iMgvRzp5spbmCqmD8Is2vSf+45KSrb10WU2wo=
=L37R
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"A few more tracing fixes:
- Fix a buffer overflow by checking nr_args correctly in probes
- Fix a warning that is reported by clang
- Fix a possible memory leak in error path of filter processing
- Fix the selftest that checks for failures, but wasn't failing
- Minor clean up on call site output of a memory trace event"
* tag 'trace-v5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
selftests/ftrace: Fix same probe error test
mm, tracing: Print symbol name for call_site in trace events
tracing: Have error path in predicate_parse() free its allocated memory
tracing: Fix clang -Wint-in-bool-context warnings in IF_ASSIGN macro
tracing/probe: Fix to check the difference of nr_args before adding probe
make TARGETS=bpf kselftest fails with:
Makefile:127: tools/build/Makefile.include: No such file or directory
When the bpf tool make is invoked from tools Makefile, srctree is
cleared and the current logic check for srctree equals to empty
string to determine srctree location from CURDIR.
When the build in invoked from selftests/bpf Makefile, the srctree
is set to "." and the same logic used for srctree equals to empty is
needed to determine srctree.
Check building_out_of_srctree undefined as the condition for both
cases to fix "make TARGETS=bpf kselftest" build failure.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20190927011344.4695-1-skhan@linuxfoundation.org
- Complete the reworks to interoperate with powerpc dynamic huge page sizes
- Fix a crash due to missed accounting for the powerpc 'struct
page'-memmap mapping granularity.
- Fix badblock initialization for volatile (DRAM emulated) pmem ranges.
- Stop triggering request_key() notifications to userspace when
NVDIMM-security is disabled / not present.
- Miscellaneous small fixups.
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJdkAprAAoJEB7SkWpmfYgCjXoQAIwJE1VzNP1V+ARxfs1rTGVz
pbNJiBnj4gxDaCkcKoatiadRkytUxeUNEcPslEKsfoNinXYqkpjMQoWm2VpILOMU
nY+SvIudGRnuesq2/Y+CP8zrX6rV4eBDfHK05RN/Zp1IlW7pTDItUx8mJ7glmDwG
PW0vkvK7yZ+dRFnpQ7QFjhA0Q3oudO5YcTVBDK5YYtDGlv69xfXqc9LW8SszJ1kU
rhCIT1kdoL5of0TIgG5pTfmggPSQ9y1xPsKjllOHNa3m50eGOkkQLELOVzQb1frW
cjAsPLjRDSzvdHHSLyu0Is04Q5JU2CucxHl2SXGHiOt5tigH8dk5XFxWt0Pc8EXx
acYYiBqUXC3MomSYWeLK4BdO2cRTqcPPXgJYAqXblqr+/0ys+rFepjw+j8JkiLZa
5UCC30l1GXEpw9u6gdCMqvvHN2gHvDB0BV82Sx8wTewJpeL18wCUJoKVuFmpsHko
p1cCe7St1TzcK3eO+xfeW1rxNrcXUpKVYXVa/WOJW0vwErqAZ6YCdNuyJHocZzXn
vNyIQmVDOlubsgBAI2ExxeZO6xc8UIwLhLg7XEJ0mg3k6UXA8HZxH2B2THJk1BSF
RppodkYiMknh11sqgpGp+Hz5XSEg/jvmCdL/qRDGAwhsFhFaxDH37Kg4Qncj2/dg
uDvDHXNCjbGpzCo3tyNx
=Z6Fa
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-fixes-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
More libnvdimm updates from Dan Williams:
- Complete the reworks to interoperate with powerpc dynamic huge page
sizes
- Fix a crash due to missed accounting for the powerpc 'struct
page'-memmap mapping granularity
- Fix badblock initialization for volatile (DRAM emulated) pmem ranges
- Stop triggering request_key() notifications to userspace when
NVDIMM-security is disabled / not present
- Miscellaneous small fixups
* tag 'libnvdimm-fixes-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
libnvdimm/region: Enable MAP_SYNC for volatile regions
libnvdimm: prevent nvdimm from requesting key when security is disabled
libnvdimm/region: Initialize bad block for volatile namespaces
libnvdimm/nfit_test: Fix acpi_handle redefinition
libnvdimm/altmap: Track namespace boundaries in altmap
libnvdimm: Fix endian conversion issues
libnvdimm/dax: Pick the right alignment default when creating dax devices
powerpc/book3s64: Export has_transparent_hugepage() related functions.
Pull networking fixes from David Miller:
1) Sanity check URB networking device parameters to avoid divide by
zero, from Oliver Neukum.
2) Disable global multicast filter in NCSI, otherwise LLDP and IPV6
don't work properly. Longer term this needs a better fix tho. From
Vijay Khemka.
3) Small fixes to selftests (use ping when ping6 is not present, etc.)
from David Ahern.
4) Bring back rt_uses_gateway member of struct rtable, it's semantics
were not well understood and trying to remove it broke things. From
David Ahern.
5) Move usbnet snaity checking, ignore endpoints with invalid
wMaxPacketSize. From Bjørn Mork.
6) Missing Kconfig deps for sja1105 driver, from Mao Wenan.
7) Various small fixes to the mlx5 DR steering code, from Alaa Hleihel,
Alex Vesker, and Yevgeny Kliteynik
8) Missing CAP_NET_RAW checks in various places, from Ori Nimron.
9) Fix crash when removing sch_cbs entry while offloading is enabled,
from Vinicius Costa Gomes.
10) Signedness bug fixes, generally in looking at the result given by
of_get_phy_mode() and friends. From Dan Crapenter.
11) Disable preemption around BPF_PROG_RUN() calls, from Eric Dumazet.
12) Don't create VRF ipv6 rules if ipv6 is disabled, from David Ahern.
13) Fix quantization code in tcp_bbr, from Kevin Yang.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (127 commits)
net: tap: clean up an indentation issue
nfp: abm: fix memory leak in nfp_abm_u32_knode_replace
tcp: better handle TCP_USER_TIMEOUT in SYN_SENT state
sk_buff: drop all skb extensions on free and skb scrubbing
tcp_bbr: fix quantization code to not raise cwnd if not probing bandwidth
mlxsw: spectrum_flower: Fail in case user specifies multiple mirror actions
Documentation: Clarify trap's description
mlxsw: spectrum: Clear VLAN filters during port initialization
net: ena: clean up indentation issue
NFC: st95hf: clean up indentation issue
net: phy: micrel: add Asym Pause workaround for KSZ9021
net: socionext: ave: Avoid using netdev_err() before calling register_netdev()
ptp: correctly disable flags on old ioctls
lib: dimlib: fix help text typos
net: dsa: microchip: Always set regmap stride to 1
nfp: flower: fix memory leak in nfp_flower_spawn_vnic_reprs
nfp: flower: prevent memory leak in nfp_flower_spawn_phy_reprs
net/sched: Set default of CONFIG_NET_TC_SKB_EXT to N
vrf: Do not attempt to create IPv6 mcast rule if IPv6 is disabled
net: sched: sch_sfb: don't call qdisc_put() while holding tree lock
...
The "same probe" selftest that tests that adding the same probe fails
doesn't add the same probe and passes, which fails the test.
Fixes: b78b94b821 ("selftests/ftrace: Update kprobe event error testcase")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
An assortment of fixes that were either missed by me, or didn't arrive quite in
time for the first v5.4 pull.
Most notable is a fix for an issue with tlbie (broadcast TLB invalidation) on
Power9, when using the Radix MMU. The tlbie can race with an mtpid (move to PID
register, essentially MMU context switch) on another thread of the core, which
can cause stores to continue to go to a page after it's unmapped.
A fix in our KVM code to add a missing barrier, the lack of which has been
observed to cause missed IPIs and subsequently stuck CPUs in the host.
A change to the way we initialise PCR (Processor Compatibility Register) to make
it forward compatible with future CPUs.
On some older PowerVM systems our H_BLOCK_REMOVE support could oops, fix it to
detect such systems and fallback to the old invalidation method.
A fix for an oops seen on some machines when using KASAN on 32-bit.
A handful of other minor fixes, and two new selftests.
Thanks to:
Alistair Popple, Aneesh Kumar K.V, Christophe Leroy, Gustavo Romero, Joel
Stanley, Jordan Niethe, Laurent Dufour, Michael Roth, Oliver O'Halloran.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAl2PRGITHG1wZUBlbGxl
cm1hbi5pZC5hdQAKCRBR6+o8yOGlgClRD/9jKIT6GjVpRMc+Dg9zHB5/Pir7gePk
ztXKI+u15GrrXgjtWEZ1PaaXvtNIfs/IZHDQm5gyJjiBAKcGl2v+9ETaMzO5sjZ7
GSe1F8VX/MwzRnET8Jph8w/b0cy0Q8xndkEOjcJqJ7+TF+SSWqmJEdmBfkU23jWD
B3kW4W1x2xt/XGsX25l1HpUgpcJqzukCeYUSCdqUu2j+sXAEZmfgTRG8uD4HffzZ
3As76TrBiJsDnkyH0qi2G1BuLXrQbAMdjTeSGi+cb0gTIunCr190gI4+Tjdu2/z7
ywWR2ZUkueCNDcLsqXaqpZx50utPJ44//uY750sk72vixJJOVuOWM6+5HKVW83se
/v0zkOcI9+ywNHe0vLfP3Jm/OMMHYxkIwz6kVu2NSR6sE79B9AZpBFU+Nynq7kKl
+Hc6md/HATvR+NK6LtQKtEGydRhvxU5n3KBmjq3SQj+B/ZlU6IdgerfhUWrNvg0B
zzHeT35X6UBpswonhkQLgqJuaWpkClK9wsUy85MuA7aub1EP8S6/X7paKoiOtAHK
NjlXM2JYV5OKwhjGgdCiI94Bdune7yudKPdsXV3Gr8Iw7wf2bQk1p7VH+LcruyE9
YJdXwCgN0PaoFUQh3AR4CqzzFwqDya8FQqdkFN3kqhRLVGAMq/PsV8/Tn+myTgQP
rZnWnbfZh9BMjw==
=dF42
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"An assortment of fixes that were either missed by me, or didn't arrive
quite in time for the first v5.4 pull.
- Most notable is a fix for an issue with tlbie (broadcast TLB
invalidation) on Power9, when using the Radix MMU. The tlbie can
race with an mtpid (move to PID register, essentially MMU context
switch) on another thread of the core, which can cause stores to
continue to go to a page after it's unmapped.
- A fix in our KVM code to add a missing barrier, the lack of which
has been observed to cause missed IPIs and subsequently stuck CPUs
in the host.
- A change to the way we initialise PCR (Processor Compatibility
Register) to make it forward compatible with future CPUs.
- On some older PowerVM systems our H_BLOCK_REMOVE support could
oops, fix it to detect such systems and fallback to the old
invalidation method.
- A fix for an oops seen on some machines when using KASAN on 32-bit.
- A handful of other minor fixes, and two new selftests.
Thanks to: Alistair Popple, Aneesh Kumar K.V, Christophe Leroy,
Gustavo Romero, Joel Stanley, Jordan Niethe, Laurent Dufour, Michael
Roth, Oliver O'Halloran"
* tag 'powerpc-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/eeh: Fix eeh eeh_debugfs_break_device() with SRIOV devices
powerpc/nvdimm: use H_SCM_QUERY hcall on H_OVERLAP error
powerpc/nvdimm: Use HCALL error as the return value
selftests/powerpc: Add test case for tlbie vs mtpidr ordering issue
powerpc/mm: Fixup tlbie vs mtpidr/mtlpidr ordering issue on POWER9
powerpc/book3s64/radix: Rename CPU_FTR_P9_TLBIE_BUG feature flag
powerpc/book3s64/mm: Don't do tlbie fixup for some hardware revisions
powerpc/pseries: Call H_BLOCK_REMOVE when supported
powerpc/pseries: Read TLB Block Invalidate Characteristics
KVM: PPC: Book3S HV: use smp_mb() when setting/clearing host_ipi flag
powerpc/mm: Fix an Oops in kasan_mmu_init()
powerpc/mm: Add a helper to select PAGE_KERNEL_RO or PAGE_READONLY
powerpc/64s: Set reserved PCR bits
powerpc: Fix definition of PCR bits to work with old binutils
powerpc/book3s64/radix: Remove WARN_ON in destroy_context()
powerpc/tm: Add tm-poison test
Pull scheduler fixes from Ingo Molnar:
- Apply a number of membarrier related fixes and cleanups, which fixes
a use-after-free race in the membarrier code
- Introduce proper RCU protection for tasks on the runqueue - to get
rid of the subtle task_rcu_dereference() interface that was easy to
get wrong
- Misc fixes, but also an EAS speedup
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Avoid redundant EAS calculation
sched/core: Remove double update_max_interval() call on CPU startup
sched/core: Fix preempt_schedule() interrupt return comment
sched/fair: Fix -Wunused-but-set-variable warnings
sched/core: Fix migration to invalid CPU in __set_cpus_allowed_ptr()
sched/membarrier: Return -ENOMEM to userspace on memory allocation failure
sched/membarrier: Skip IPIs when mm->mm_users == 1
selftests, sched/membarrier: Add multi-threaded test
sched/membarrier: Fix p->mm->membarrier_state racy load
sched/membarrier: Call sync_core only before usermode for same mm
sched/membarrier: Remove redundant check
sched/membarrier: Fix private expedited registration check
tasks, sched/core: RCUify the assignment of rq->curr
tasks, sched/core: With a grace period after finish_task_switch(), remove unnecessary code
tasks, sched/core: Ensure tasks are available for a grace period after leaving the runqueue
tasks: Add a count of task RCU users
sched/core: Convert vcpu_is_preempted() from macro to an inline function
sched/fair: Remove unused cfs_rq_clock_task() function
Pull integrity updates from Mimi Zohar:
"The major feature in this time is IMA support for measuring and
appraising appended file signatures. In addition are a couple of bug
fixes and code cleanup to use struct_size().
In addition to the PE/COFF and IMA xattr signatures, the kexec kernel
image may be signed with an appended signature, using the same
scripts/sign-file tool that is used to sign kernel modules.
Similarly, the initramfs may contain an appended signature.
This contained a lot of refactoring of the existing appended signature
verification code, so that IMA could retain the existing framework of
calculating the file hash once, storing it in the IMA measurement list
and extending the TPM, verifying the file's integrity based on a file
hash or signature (eg. xattrs), and adding an audit record containing
the file hash, all based on policy. (The IMA support for appended
signatures patch set was posted and reviewed 11 times.)
The support for appended signature paves the way for adding other
signature verification methods, such as fs-verity, based on a single
system-wide policy. The file hash used for verifying the signature and
the signature, itself, can be included in the IMA measurement list"
* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: ima_api: Use struct_size() in kzalloc()
ima: use struct_size() in kzalloc()
sefltest/ima: support appended signatures (modsig)
ima: Fix use after free in ima_read_modsig()
MODSIGN: make new include file self contained
ima: fix freeing ongoing ahash_request
ima: always return negative code for error
ima: Store the measurement again when appraising a modsig
ima: Define ima-modsig template
ima: Collect modsig
ima: Implement support for module-style appended signatures
ima: Factor xattr_verify() out of ima_appraise_measurement()
ima: Add modsig appraise_type option for module-style appended signatures
integrity: Select CONFIG_KEYS instead of depending on it
PKCS#7: Introduce pkcs7_get_digest()
PKCS#7: Refactor verify_pkcs7_signature()
MODSIGN: Export module signature definitions
ima: initialize the "template" field with the default template
* The usual accuracy improvements for nested virtualization
* The usual round of code cleanups from Sean
* Added back optimizations that were prematurely removed in 5.2
(the bare minimum needed to fix the regression was in 5.3-rc8,
here comes the rest)
* Support for UMWAIT/UMONITOR/TPAUSE
* Direct L2->L0 TLB flushing when L0 is Hyper-V and L1 is KVM
* Tell Windows guests if SMT is disabled on the host
* More accurate detection of vmexit cost
* Revert a pvqspinlock pessimization
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJdjfaKAAoJEL/70l94x66D8MAH/2thJnM47tYtMTFA4GBFugeH
mAx8OApWFBo8apOip+8ElFLPQ8FQdZCzr9ti8H4JkuzKxgsxCs1iqEg5pHEKxSTi
K9kLOZwoFtwgy3XmxC0PIZ9lT2Wx74ruh1HF+QG/YsjKH636UPv2VpmulsTNbm62
2ryzOb3TlGT/cjf+gv9l6IYIxZa2Ff19PF4i//H8u4YRBj358/jr99CK01iE0M9r
4NhEKiQZywzREWtKxymGOM6HEbwbWcIa+loYjj2htq8epep6f9Y1zQ0Jcn5+nPA0
cn1T2gGJAJ0OUahKLwNbz8pzrFDkW+eoQgqCBJZ4RT9Uf8WCESfl14p+/vRkAMg=
=tk5S
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more KVM updates from Paolo Bonzini:
"x86 KVM changes:
- The usual accuracy improvements for nested virtualization
- The usual round of code cleanups from Sean
- Added back optimizations that were prematurely removed in 5.2 (the
bare minimum needed to fix the regression was in 5.3-rc8, here
comes the rest)
- Support for UMWAIT/UMONITOR/TPAUSE
- Direct L2->L0 TLB flushing when L0 is Hyper-V and L1 is KVM
- Tell Windows guests if SMT is disabled on the host
- More accurate detection of vmexit cost
- Revert a pvqspinlock pessimization"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (56 commits)
KVM: nVMX: cleanup and fix host 64-bit mode checks
KVM: vmx: fix build warnings in hv_enable_direct_tlbflush() on i386
KVM: x86: Don't check kvm_rebooting in __kvm_handle_fault_on_reboot()
KVM: x86: Drop ____kvm_handle_fault_on_reboot()
KVM: VMX: Add error handling to VMREAD helper
KVM: VMX: Optimize VMX instruction error and fault handling
KVM: x86: Check kvm_rebooting in kvm_spurious_fault()
KVM: selftests: fix ucall on x86
Revert "locking/pvqspinlock: Don't wait if vCPU is preempted"
kvm: nvmx: limit atomic switch MSRs
kvm: svm: Intercept RDPRU
kvm: x86: Add "significant index" flag to a few CPUID leaves
KVM: x86/mmu: Skip invalid pages during zapping iff root_count is zero
KVM: x86/mmu: Explicitly track only a single invalid mmu generation
KVM: x86/mmu: Revert "KVM: x86/mmu: Remove is_obsolete() call"
KVM: x86/mmu: Revert "Revert "KVM: MMU: reclaim the zapped-obsolete page first""
KVM: x86/mmu: Revert "Revert "KVM: MMU: collapse TLB flushes when zap all pages""
KVM: x86/mmu: Revert "Revert "KVM: MMU: zap pages in batch""
KVM: x86/mmu: Revert "Revert "KVM: MMU: add tracepoint for kvm_mmu_invalidate_all_pages""
KVM: x86/mmu: Revert "Revert "KVM: MMU: show mmu_valid_gen in shadow page related tracepoints""
...
When a port is created, its VLAN filters are not cleared by the
firmware. This causes tagged packets to be later dropped by the ingress
STP filters, which default to DISCARD state.
The above did not matter much until commit b5ce611fd9 ("mlxsw:
spectrum: Add devlink-trap support") where we exposed the drop reason to
users.
Without this patch, the drop reason users will see is not consistent. If
a port is enslaved to a VLAN-aware bridge and a packet with an invalid
VLAN tries to ingress the bridge, it will be dropped due to ingress STP
filter. If the VLAN is later enabled and then disabled, the packet will
be dropped by the ingress VLAN filter despite the above being a
seemingly NOP operation.
Fix this by clearing all the VLAN filters during port initialization.
Adjust the test accordingly.
Fixes: b5ce611fd9 ("mlxsw: spectrum: Add devlink-trap support")
Reported-by: Alex Kushnarov <alexanderk@mellanox.com>
Tested-by: Alex Kushnarov <alexanderk@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When KVM_GET_MSRS fail the report looks like
==== Test Assertion Failure ====
lib/x86_64/processor.c:1089: r == nmsrs
pid=28775 tid=28775 - Argument list too long
1 0x000000000040a55f: vcpu_save_state at processor.c:1088 (discriminator 3)
2 0x00000000004010e3: main at state_test.c:171 (discriminator 4)
3 0x00007fb8e69223d4: ?? ??:0
4 0x0000000000401287: _start at ??:?
Unexpected result from KVM_GET_MSRS, r: 36 (failed at 194)
and it's not obvious that '194' here is the failed MSR index and that
it's printed in hex. Change that.
Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Daniel Borkmann says:
====================
pull-request: bpf 2019-09-27
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix libbpf's BTF dumper to not skip anonymous enum definitions, from Andrii.
2) Fix BTF verifier issues when handling the BTF of vmlinux, from Alexei.
3) Fix nested calls into bpf_event_output() from TCP sockops BPF
programs, from Allan.
4) Fix NULL pointer dereference in AF_XDP's xsk map creation when
allocation fails, from Jonathan.
5) Remove unneeded 64 byte alignment requirement of the AF_XDP UMEM
headroom, from Bjorn.
6) Remove unused XDP_OPTIONS getsockopt() call which results in an error
on older kernels, from Toke.
7) Fix a client/server race in tcp_rtt BPF kselftest case, from Stanislav.
8) Fix indentation issue in BTF's btf_enum_check_kflag_member(), from Colin.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
To pick the change in:
bf73fc0fa9 ("drm/i915: Show support for accurate sw PMU busyness tracking")
That don't result in any changes in tooling, just silences this perf
build warning:
Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-o651nt7vpz93tu3nmx4f3xql@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With this change if a perf_date parameter is provided to asciidoc then
it will override the default date written to the man page metadata.
Without this change, or if the perf_date isn't specified, then the
current date is written to the metadata.
Having this parameter allows the metadata to be constant if builds
happen on different dates.
The name of the parameter is intended to be consistent with the existing
perf_version parameter.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20190921041327.155054-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
An optimized build such as:
make -C tools/perf CLANG=1 CC=clang EXTRA_CFLAGS="-O3
will turn the dereference operation into a ud2 instruction, raising a
SIGILL rather than a SIGSEGV. Use raise(..) for correctness and clarity.
Similar issues were addressed in Numfor Mbiziwo-Tiapo's patch:
https://lkml.org/lkml/2019/7/8/1234
Committer testing:
Before:
[root@quaco ~]# perf test hooks
55: perf hooks : Ok
[root@quaco ~]# perf test -v hooks
55: perf hooks :
--- start ---
test child forked, pid 17092
SIGSEGV is observed as expected, try to recover.
Fatal error (SEGFAULT) in perf hook 'test'
test child finished with 0
---- end ----
perf hooks: Ok
[root@quaco ~]#
After:
[root@quaco ~]# perf test hooks
55: perf hooks : Ok
[root@quaco ~]# perf test -v hooks
55: perf hooks :
--- start ---
test child forked, pid 17909
SIGSEGV is observed as expected, try to recover.
Fatal error (SEGFAULT) in perf hook 'test'
test child finished with 0
---- end ----
perf hooks: Ok
[root@quaco ~]#
Fixes: a074865e60 ("perf tools: Introduce perf hooks")
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lore.kernel.org/lkml/20190925195924.152834-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Check that accesses by nested guests are logged according to the
L1 physical addresses rather than L2.
Most of the patch is really adding EPT support to the testing
framework.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull more perf updates from Ingo Molnar:
"The only kernel change is comment typo fixes.
The rest is mostly tooling fixes, but also new vendor event additions
and updates, a bigger libperf/libtraceevent library and a header files
reorganization that came in a bit late"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (108 commits)
perf unwind: Fix libunwind build failure on i386 systems
perf parser: Remove needless include directives
perf build: Add detection of java-11-openjdk-devel package
perf jvmti: Include JVMTI support for s390
perf vendor events: Remove P8 HW events which are not supported
perf evlist: Fix access of freed id arrays
perf stat: Fix free memory access / memory leaks in metrics
perf tools: Replace needless mmap.h with what is needed, event.h
perf evsel: Move config terms to a separate header
perf evlist: Remove unused perf_evlist__fprintf() method
perf evsel: Introduce evsel_fprintf.h
perf evsel: Remove need for symbol_conf in evsel_fprintf.c
perf copyfile: Move copyfile routines to separate files
libperf: Add perf_evlist__poll() function
libperf: Add perf_evlist__add_pollfd() function
libperf: Add perf_evlist__alloc_pollfd() function
libperf: Add libperf_init() call to the tests
libperf: Merge libperf_set_print() into libperf_init()
libperf: Add libperf dependency for tests targets
libperf: Use sys/types.h to get ssize_t, not unistd.h
...
Naresh Kamboju reported, that on the i386 build pr_err()
doesn't get defined properly due to header ordering:
perf-in.o: In function `libunwind__x86_reg_id':
tools/perf/util/libunwind/../../arch/x86/util/unwind-libunwind.c:109:
undefined reference to `pr_err'
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Merge more updates from Andrew Morton:
- almost all of the rest of -mm
- various other subsystems
Subsystems affected by this patch series:
memcg, misc, core-kernel, lib, checkpatch, reiserfs, fat, fork,
cpumask, kexec, uaccess, kconfig, kgdb, bug, ipc, lzo, kasan, madvise,
cleanups, pagemap
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (77 commits)
arch/sparc/include/asm/pgtable_64.h: fix build
mm: treewide: clarify pgtable_page_{ctor,dtor}() naming
ntfs: remove (un)?likely() from IS_ERR() conditions
IB/hfi1: remove unlikely() from IS_ERR*() condition
xfs: remove unlikely() from WARN_ON() condition
wimax/i2400m: remove unlikely() from WARN*() condition
fs: remove unlikely() from WARN_ON() condition
xen/events: remove unlikely() from WARN() condition
checkpatch: check for nested (un)?likely() calls
hexagon: drop empty and unused free_initrd_mem
mm: factor out common parts between MADV_COLD and MADV_PAGEOUT
mm: introduce MADV_PAGEOUT
mm: change PAGEREF_RECLAIM_CLEAN with PAGE_REFRECLAIM
mm: introduce MADV_COLD
mm: untag user pointers in mmap/munmap/mremap/brk
vfio/type1: untag user pointers in vaddr_get_pfn
tee/shm: untag user pointers in tee_shm_register
media/v4l2-core: untag user pointers in videobuf_dma_contig_user_get
drm/radeon: untag user pointers in radeon_gem_userptr_ioctl
drm/amdgpu: untag user pointers
...
BTF-to-C converter previously skipped anonymous enums in an assumption
that those are embedded in struct's field definitions. This is not
always the case and a lot of kernel constants are defined as part of
anonymous enums. This change fixes the logic by eagerly marking all
types as either referenced by any other type or not. This is enough to
distinguish two classes of anonymous enums and emit previously omitted
enum definitions.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20190925203745.3173184-1-andriin@fb.com
Commit 7d9e5f4221 removed references from certain dsts, but accounting
for this never translated down into the fib6 suppression code. This bug
was triggered by WireGuard users who use wg-quick(8), which uses the
"suppress-prefix" directive to ip-rule(8) for routing all of their
internet traffic without routing loops. The test case added here
causes the reference underflow by causing packets to evaluate a suppress
rule.
Fixes: 7d9e5f4221 ("ipv6: convert major tx path to use RT6_LOOKUP_F_DST_NOREF")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change the definition of the RBCOMPUTE function. The propagate callback
repeatedly calls RBCOMPUTE as it moves from leaf to root. it wants to
stop recomputing once the augmented subtree information doesn't change.
This was previously checked using the == operator, but that only works
when the augmented subtree information is a scalar field. This commit
modifies the RBCOMPUTE function so that it now sets the augmented subtree
information instead of returning it, and returns a boolean value
indicating if the propagate callback should stop.
The motivation for this change is that I want to introduce augmented
rbtree uses where the augmented data for the subtree is a struct instead
of a scalar.
Link: http://lkml.kernel.org/r/20190703040156.56953-4-walken@google.com
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add RB_DECLARE_CALLBACKS_MAX, which generates augmented rbtree callbacks
for the case where the augmented value is a scalar whose definition
follows a max(f(node)) pattern. This actually covers all present uses of
RB_DECLARE_CALLBACKS, and saves some (source) code duplication in the
various RBCOMPUTE function definitions.
[walken@google.com: fix mm/vmalloc.c]
Link: http://lkml.kernel.org/r/CANN689FXgK13wDYNh1zKxdipeTuALG4eKvKpsdZqKFJ-rvtGiQ@mail.gmail.com
[walken@google.com: re-add check to check_augmented()]
Link: http://lkml.kernel.org/r/20190727022027.GA86863@google.com
Link: http://lkml.kernel.org/r/20190703040156.56953-3-walken@google.com
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "make RB_DECLARE_CALLBACKS more generic", v3.
These changes are intended to make the RB_DECLARE_CALLBACKS macro more
generic (allowing the aubmented subtree information to be a struct instead
of a scalar).
I have verified the compiled lib/interval_tree.o and mm/mmap.o files to
check that they didn't change. This held as expected for interval_tree.o;
mmap.o did have some changes which could be reverted by marking
__vma_link_rb as noinline. I did not add such a change to the patchset; I
felt it was reasonable enough to leave the inlining decision up to the
compiler.
This patch (of 3):
Add a short comment summarizing the arguments to RB_DECLARE_CALLBACKS.
The arguments are also now capitalized. This copies the style of the
INTERVAL_TREE_DEFINE macro.
No functional changes in this commit, only comments and capitalization.
Link: http://lkml.kernel.org/r/20190703040156.56953-2-walken@google.com
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As was already noted in rbtree.h, the logic to cache rb_first (or
rb_last) can easily be implemented externally to the core rbtree api.
This commit takes the changes applied to the include/linux/ and lib/
rbtree files in 9f973cb380 ("lib/rbtree: avoid generating code twice
for the cached versions"), and applies these to the
tools/include/linux/ and tools/lib/ files as well to keep them
synchronized.
Link: http://lkml.kernel.org/r/20190703034812.53002-1-walken@google.com
Signed-off-by: Michel Lespinasse <walken@google.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some recent changes in latest Clang started causing the following
warning when unrolling strobemeta test case main loop:
progs/strobemeta.h:416:2: warning: loop not unrolled: the optimizer was
unable to perform the requested transformation; the transformation might
be disabled or specified as part of an unsupported transformation
ordering [-Wpass-failed=transform-warning]
This patch simplifies loop's exit condition to depend only on constant
max iteration number (STROBE_MAX_MAP_ENTRIES), while moving early
termination logic inside the loop body. The changes are equivalent from
program logic standpoint, but fixes the warning. It also appears to
improve generated BPF code, as it fixes previously failing non-unrolled
strobemeta test cases.
Cc: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
