The code inherited from the Skylake driver does not seem to follow any
known hardware recommendations.
The only two recommended options are
a) use DPIB registers if VC1 traffic is not allowed
b) use DPIB DDR update if VC1 traffic is used
In all of SOF-based updated, VC1 is not supported so we can 'safely'
move to using DPIB registers only.
This patch keeps the legacy code, in case there was an undocumented
issue lost to history, and adds the DPIB DDR update for additional
debug.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20211207193947.71080-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some DAI components, such as HDaudio, need to be stopped in two steps
a) stop the DAI component
b) stop the DAI DMA
This patch enables this two-step stop by expanding the DAI_CONFIG
IPC flags and split them into 2 parts.
The 4 LSB bits indicate when the DAI_CONFIG IPC is sent, ex: hw_params,
hw_free or pause. The 4 MSB bits are used as the quirk flags to be used
along with the command flags. The quirk flag called
SOF_DAI_CONFIG_FLAGS_2_STEP_STOP shall be set along with the HW_PARAMS
command flag, i.e. before the pipeline is started so that the stop/pause
trigger op in the FW can take the appropriate action to either
perform/skip the DMA stop. If set, the DMA stop will be executed when
the DAI_CONFIG IPC is sent during hw_free. In the case of pause, DMA
pause will be handled when the DAI_CONFIG IPC is sent with the PAUSE
command flag.
Along with this, modify the signature for the hda_ctrl_dai_widget_setup/
hda_ctrl_dai_widget_free() functions to take additional flags as an
argument and modify all users to pass the appropriate quirk flags. Only
the HDA DAI's need to pass the SOF_DAI_CONFIG_FLAGS_2_STEP_STOP quirk
flag during hw_params to indicate that it supports two-step stop and
pause.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211125101520.291581-10-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If codec is in runtime suspend, but controller is not, hotplug events
are missed as the codec has no way to alert the controller. Problem does
not occur if both controller and codec are active, or when both are
suspended.
An easy way to reproduce is to play an audio stream on one codec (e.g.
to HDMI/DP display codec), wait for other HDA codec to go to runtime
suspend, and then plug in a headset to the suspended codec. The jack
event is not reported correctly in this case. Another way to reproduce
is to force controller to stay active with
"snd_sof_pci.sof_pci_debug=0x1"
Fix the issue by reconfiguring the WAKEEN register when powering up/down
individual links, and handling control events in the interrupt handler.
Fixes: 87fc20e4a0 ("ASoC: SOF: Intel: hda: use hdac_ext fine-grained link management")
Reported-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20211105111655.668777-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for dynamic pipelines by modifying the PCM
hw_params ioctl implementation to determine the widgets
required for a PCM stream by querying the list of
connected DAPM widgets. This list is saved as part of
snd_sof_pcm_stream struct and will be used to setup the widgets.
The sof_widget_list_setup/free routines setup and free connected
DAPM widgets when a PCM is opened/closed. These routines accept
a list of connected DAPM widgets as input and determine the SOF
widgets, their corresponding pipeline widgets and connections
between them that need to be setup before the PCM is triggered.
Please note that the dynamic pipeline feature will only be enabled
for those pipelines whose dynamic_pipeline_widget flag is set in
topologies. Add a new token called SOF_TKN_SCHED_DYNAMIC_PIPELINE
that when set in topology will be applied to the
dynamic_pipeline_widget flag of the pipeline widget.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210927120517.20505-12-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On some platforms with an external HDaudio codec, the DSDT reports the
presence of SoundWire devices. Pin-mux restrictions and board reworks
usually prevent coexistence between the two types of links, let's
prevent unnecessary operations from starting.
In the case of a single iDISP codec being detected, we still start the
links even if no SoundWire machine configuration was detected, so that
we can double-check what the hardware is and add the missing
configuration if applicable.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Link: https://lore.kernel.org/r/20210726182855.179943-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With more warnings than the default, Sparse throws the following
warning:
sound/soc/sof/intel/hda.c:1127:49: error: self-comparison always
evaluates to true
sound/soc/sof/intel/hda.c:1128:49: error: self-comparison always
evaluates to true
sound/soc/sof/intel/hda.c:1129:48: error: self-comparison always
evaluates to true
This looks like an obvious error, with a likely copy-pasted line
leading to the use of the wrong index in an inner loop. One of the
worst single-character bugs in a long time.
This problem was not detected in our tests since in practice SoundWire
platforms only have identical devices per link and the index mistake
did not change the results.
Fixes: 6f5d506d7ff1dq ('ASoC: SOF: Intel: SoundWire: refine ACPI match')
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210511213707.32958-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ACPI scan capabilities is called from the intel-dspconfig as well
as the SOF/HDaudio drivers. This creates dependencies and randconfig issues
when HDaudio and SOF/SoundWire are not all configured as modules.
To simplify Kconfig dependencies between HDAudio, SoundWire, SOF and
intel-dspconfig, move the ACPI scan helpers to a dedicated
module. This follows the same idea as NHLT helpers which are already
handled as a dedicated module.
The only functional change is that the kernel parameter to filter
links is now handled by a different module, but that was only provided
for developers needing work-arounds for early BIOS releases.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210302003125.1178419-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The pinmux allows for 2 SoundWire links to be enabled along with
DMICs. This was the default configuration on the TGL-RVP.
One issue with this configuration is that we don't have a means to
automatically detect how many DMICs are used, which in turn requires
the user to manually rename the topology file required on a platform.
This was borderline acceptable for Intel RVPs, but now that this
configuration is present in HP devices we need to automate the
process.
This patch makes use of the NHLT information and will pass the DMIC
number to the machine driver as a parameter. A follow-up patch will
expose the DMIC number to userspace/UCM with the configuration strings.
The Google devices do make use of DMICs instead of SoundWire link 2
and 3, but their topology is unique enough that they do not need any
NHTL support or topology renaming.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210208233336.59449-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The condition boot_iteration == HDA_FW_BOOT_ATTEMPTS to determine
the log level for the DSP status dump would only work in the case of DSP
init failure after maximum number of attempts to initialize the DSP. If
DSP init succeeds in less than HDA_FW_BOOT_ATTEMPTS attempts and FW
loading fails, the ROM status dump would end up getting logged as debug
instead of an error.
So, add a new flag, SOF_DBG_DUMP_LOG_ERROR, to explicitly specify
the log level for DSP status dump.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201211100743.3188821-4-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
