This page is used to store information about MPI (IOC Status & LogInfo)
triggers.
Driver Persistent Trigger Page-4 format:
-------------------------------------------------------
| 31 24 23 16 15 8 7 0| Byte
-------------------------------------------------------
| PageType | PageNumber | Reserved | PageVersion | 0x00
--------------------------------------------------------
| Reserved | ExtPageType | ExtPageLength | 0x04
--------------------------------------------------------
| Reserved | NumMpiTriggerEntries | 0x08
--------------------------------------------------------
| MPITriggerEntry[0] | 0x0C
--------------------------------------------------------
| … |
--------------------------------------------------------
| MPITriggerEntry[19] | 0xA4
--------------------------------------------------------
NumMpiTriggerEntries:
This field indicates number of MPI (IOC Status & LogInfo) trigger entries
stored in this page. Currently driver is supporting a maximum of 20-MPI
trigger entries.
MPITriggerEntry:
-----------------------------------------------------
| 31 16 15 0 |
-----------------------------------------------------
| Reserved | IOCStatus |
-----------------------------------------------------
| IOCLogInfo |
-----------------------------------------------------
IOCStatus => Status value from the IOC
IOCLogInfo => Specific value that supplements the IOCStatus.
Link: https://lore.kernel.org/r/20201126094311.8686-7-suganath-prabu.subramani@broadcom.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Trigger Page2 is used to store information about Event triggers:
31 24 23 16 15 8 7 0 Byte
-----------------------------------------------
|PageType |PageNumber |Reserved |PageVersion| 0x00
-----------------------------------------------
|Reserved |ExtPageType | ExtPageLength | 0x04
-----------------------------------------------
| Reserved | NumMPIEventTriggers | 0x08
-----------------------------------------------
| MPIEventTriggerEntries | 0x0C
| | 0xFC
-----------------------------------------------
Number of MPI Event Trigger Entries currently stored in this page. If this
is set to zero, there are no valid MPI-Event-Trigger entries available in
this page.
MPIEventTriggerEntry:
- MPIEventCode [15:00]
MPI Event code specified in MPI-Spec
- MPIEventCodeSpecific [16:31]
For Event Code “MPI2_EVENT_LOG_ENTRY_ADDED (0x0021)”,
this field specifies the Log-Entry-Qualifier.
For all other Event Codes, this field is reserved and not used
Maximum of 20-event trigger entries can be stored in this page.
Link: https://lore.kernel.org/r/20201126094311.8686-5-suganath-prabu.subramani@broadcom.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Trigger Page 1 is used to store information about Master triggers. Below
are the Master trigger conditions:
Bit[3] Trigger condition for Device Removal event
Bit[2] Trigger condition for TM command issued by driver
Bit[1] Trigger condition for Adapter reset issued by driver
Bit[0] Trigger condition for IOC Fault state
During driver load, if Master trigger type bit is enabled in the Persistent
Trigger Page0, then read the Persistent Trigger Page1 and update the IOC
instance's diag_trigger_master.MasterData with Persistent Trigger Page1's
MasterTriggerFlags.
Link: https://lore.kernel.org/r/20201126094311.8686-4-suganath-prabu.subramani@broadcom.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The user can set trigger values in order to collect the IOC's host trace
buffer automatically upon detecting certain conditions. However, the
trigger values that the user sets are not persistent across system reboot
or reload of the driver.
In order to make the user trigger settings persistent, these trigger values
need to be saved in the IOC's NVRAM pages:
- Driver Persistent Trigger Page 0:
This page is used to store list of trigger types that are enabled
- Driver Persistent Trigger Page 1:
This page stores the list of Master triggers that are enabled
- Driver Persistent Trigger Page 2:
This page stores the list of MPI Event Triggers that are enabled
- Driver Persistent Trigger Page 3:
This page stores the list of SCSI Sense Triggers that are enabled
- Driver Persistent Trigger Page 4:
This page stores the list of IOCStatus-LogInfo Triggers that are
enabled.
Whenever user configures triggers, the driver persists the values in the
corresponding trigger pages. When the driver is subsequently reloaded, the
driver reads the values from the trigger pages and configures the triggers
accordingly.
During firmware upload operation, if the newer firmware supports the
trigger page feature, then driver persists the configured diag trigger
values to NVRAM.
Link: https://lore.kernel.org/r/20201126094311.8686-3-suganath-prabu.subramani@broadcom.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The controller time currently gets updated with host time during driver
load or when a controller reset is issued. I.e. when host issues the
IOCInit request message to the HBA firmware. This IOCInit message has a
field named 'TimeStamp' with which the host updates the controller time.
Sometimes controller time drifts with respect to the host and it is
difficult to correlate host logs with controller logs. Issuing a controller
reset to sync the time would impact in-flight I/O and is not a viable
option.
Instead the driver now sends an IO_UNIT_CONTROL Request to sync the time
periodically. This is done from the watchdog thread which gets invoked
every second.
The time synchronization interval is specified in the 'TimeSyncInterval'
field in Manufacturing Page11 by the controller:
TimeSyncInterval - 8 bits
bits 0-6: Time stamp Synchronization interval value
bit 7: Time stamp Synchronization interval unit,
(if this bit is one then Timestamp Synchronization
interval value is specified in terms of hours else
Timestamp Synchronization interval value is
specified in terms of minutes).
The driver keeps track of the timer using IOC's timestamp_update_count
field. This field value gets incremented whenever the watchdog thread gets
invoked. And whenever this field value is greater than or equal to the Time
Stamp Synchronization interval value, the driver sends the IO_UNIT_CONTROL
Request message to controller to update the time and then it resets the
timestamp_update_count field to zero.
Link: https://lore.kernel.org/r/20201126094311.8686-2-suganath-prabu.subramani@broadcom.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When queuing I/O request to LLD, STS_RESOURCE may be returned because:
- Host is in recovery or blocked
- Target queue throttling or target is blocked
- LLD rejection
In these scenarios BLK_STS_DEV_RESOURCE is returned to the block layer to
avoid an unnecessary re-run of the queue. However, all of the requests
queued to this SCSI device may complete immediately after reading
'sdev->device_busy' and BLK_STS_DEV_RESOURCE is returned to block layer. In
that case the current I/O won't get a chance to get queued since it is
invisible at that time for both scsi_run_queue_async() and blk-mq's
RESTART.
Fix the issue by not returning BLK_STS_DEV_RESOURCE in this situation.
Link: https://lore.kernel.org/r/20201202100419.525144-1-ming.lei@redhat.com
Fixes: 86ff7c2a80 ("blk-mq: introduce BLK_STS_DEV_RESOURCE")
Cc: Hannes Reinecke <hare@suse.com>
Cc: Sumit Saxena <sumit.saxena@broadcom.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Ewan Milne <emilne@redhat.com>
Cc: Long Li <longli@microsoft.com>
Reported-by: John Garry <john.garry@huawei.com>
Tested-by: "chenxiang (M)" <chenxiang66@hisilicon.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
clang complains about a possible code path in which a variable is used
without an initialization:
drivers/scsi/ufs/ufshcd.c:7690:3: error: variable 'sdp' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized]
BUG_ON(1);
^~~~~~~~~
include/asm-generic/bug.h:63:36: note: expanded from macro 'BUG_ON'
#define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0)
^~~~~~~~~~~~~~~~~~~
Turn the BUG_ON(1) into an unconditional BUG() that makes it clear to clang
that this code path is never hit.
Link: https://lore.kernel.org/r/20201203223137.1205933-1-arnd@kernel.org
Fixes: 4f3e900b62 ("scsi: ufs: Clear UAC for FFU and RPMB LUNs")
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
NCR5380_poll_politely2() uses in_interrupt() and irqs_disabled() to check
if it is safe to sleep.
Such usage in drivers is phased out and Linus clearly requested that code
which changes behaviour depending on context should either be separated, or
the context be explicitly conveyed in an argument passed by the caller.
Below is a context analysis of NCR5380_poll_politely2() uppermost callers:
- NCR5380_maybe_reset_bus(), task, invoked during device probe.
-> NCR5380_poll_politely()
-> do_abort()
- NCR5380_select(), task, but can only sleep in the "release, then
re-acquire" regions of the spinlock held by its caller.
Sleeping invocations (lock released):
-> NCR5380_poll_politely2()
Atomic invocations (lock acquired):
-> NCR5380_reselect()
-> NCR5380_poll_politely()
-> do_abort()
-> NCR5380_transfer_pio()
- NCR5380_intr(), interrupt handler
-> NCR5380_dma_complete()
-> NCR5380_transfer_pio()
-> NCR5380_poll_politely()
-> NCR5380_reselect() (see above)
- NCR5380_information_transfer(), task, but can only sleep in the
"release, then re-acquire" regions of the caller-held spinlock.
Sleeping invocations (lock released):
- NCR5380_transfer_pio() -> NCR5380_poll_politely()
- NCR5380_poll_politely()
Atomic invocations (lock acquired):
- NCR5380_transfer_dma()
-> NCR5380_dma_recv_setup()
=> generic_NCR5380_precv() -> NCR5380_poll_politely()
=> macscsi_pread() -> NCR5380_poll_politely()
-> NCR5380_dma_send_setup()
=> generic_NCR5380_psend -> NCR5380_poll_politely2()
=> macscsi_pwrite() -> NCR5380_poll_politely()
-> NCR5380_poll_politely2()
-> NCR5380_dma_complete()
-> NCR5380_transfer_pio()
-> NCR5380_poll_politely()
- NCR5380_transfer_pio() -> NCR5380_poll_politely
- NCR5380_reselect(), atomic, always called with hostdata spinlock
held.
Since NCR5380_poll_politely2() already takes a "wait" argument in jiffies,
use it to determine if the function can sleep. Modify atomic callers, which
passed an unused wait value in terms of HZ, to pass zero.
Link: https://lore.kernel.org/r/20201206075157.19067-1-a.darwish@linutronix.de
Cc: Michael Schmitz <schmitzmic@gmail.com>
Cc: <linux-m68k@lists.linux-m68k.org>
Suggested-by: Finn Thain <fthain@telegraphics.com.au>
Co-developed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In current task abort routine, if task abort happens to the device W-LUN,
the code directly jumps to ufshcd_eh_host_reset_handler() to perform a full
reset and restore then returns FAIL or SUCCESS. Commands sent to the device
W-LUN are most likely the SSU cmds sent during UFS PM operations. If such
SSU cmd enters task abort routine when ufshcd_eh_host_reset_handler()
flushes eh_work, it will get stuck there since err_handler is serialized
with PM operations.
In order to unblock above call path, we merely clean up the lrb taken by
this cmd, queue the eh_work and return SUCCESS. Once the cmd is aborted,
the PM operation which sends out the cmd just errors out, then err_handler
shall be able to proceed with the full reset and restore.
In this scenario, the cmd is aborted even before it is actually cleared by
HW, set the lrb->in_use flag to prevent subsequent cmds, including SCSI
cmds and dev cmds, from taking the lrb released from abort. The flag shall
evetually be cleared in __ufshcd_transfer_req_compl() invoked by the full
reset and restore from err_handler.
[mkp: conflict with event logging series]
Link: https://lore.kernel.org/r/1606910644-21185-3-git-send-email-cang@codeaurora.org
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
UFS specficication allows different VCC configurations for UFS devices,
for example:
(1). 2.70V - 3.60V (Activated by default in UFS core driver)
(2). 1.70V - 1.95V (Activated if "vcc-supply-1p8" is declared in
device tree)
(3). 2.40V - 2.70V (Supported since UFS 3.x)
With the introduction of UFS 3.x products, an issue is happening that UFS
driver will use wrong "min_uV-max_uV" values to configure the voltage of
VCC regulator on UFU 3.x products with the configuration (3) used.
To solve this issue, we simply remove pre-defined initial VCC voltage
values in UFS core driver with below reasons,
1. UFS specifications do not define how to detect the VCC configuration
supported by attached device.
2. Device tree already supports standard regulator properties.
Therefore VCC voltage shall be defined correctly in device tree, and shall
not changed by UFS driver. What UFS driver needs to do is simply enable or
disable the VCC regulator only.
Similar change is applied to VCCQ and VCCQ2 as well.
Note that we keep struct ufs_vreg unchanged. This allows vendors to
configure proper min_uV and max_uV of any regulators to make
regulator_set_voltage() works during regulator toggling flow in the
future. Without specific vendor configurations, min_uV and max_uV will be
NULL by default and UFS core driver will enable or disable the regulator
only without adjusting its voltage.
Link: https://lore.kernel.org/r/20201202091819.22363-1-stanley.chu@mediatek.com
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Can Guo <cang@codeaurora.org>
Acked-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull SCSI fixes from James Bottomley:
"Four small fixes in two drivers.
The mpt3sas fixes are all problems with timeout under unusual
conditions, and the storvsc is a missed incoming packet validation
and a missed error return"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: mpt3sas: Increase IOCInit request timeout to 30s
scsi: mpt3sas: Fix ioctl timeout
scsi: storvsc: Validate length of incoming packet in storvsc_on_channel_callback()
scsi: storvsc: Fix error return in storvsc_probe()
My patch caused kernel Oopses and delays in boot. Revert it.
The problem was that I moved the "mem->dma = paddr;" before the call to
be_fill_queue(). But the first thing that the be_fill_queue() function
does is memset the whole struct to zero which overwrites the assignment.
Link: https://lore.kernel.org/r/X8jXkt6eThjyVP1v@mwanda
Fixes: 38b2db564d ("scsi: be2iscsi: Fix a theoretical leak in beiscsi_create_eqs()")
Cc: stable <stable@vger.kernel.org>
Reported-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
To complete the MMIO based mechanism, the fields: PASID, bus, device and
function of the Process Element Entry have to be filled. (See
OpenCAPI Power Platform Architecture document)
Hypervisor Process Element Entry
Word
0 1 .... 7 8 ...... 12 13 ..15 16.... 19 20 ........... 31
0 OSL Configuration State (0:31)
1 OSL Configuration State (32:63)
2 PASID | Reserved
3 Bus | Device |Function | Reserved
4 Reserved
5 Reserved
6 ....
Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201125155013.39955-4-clombard@linux.vnet.ibm.com
