Not all firmware versions support allocating DMA memory in smaller blocks so
first try to allocate big block of DMA memory for QMI. If the allocation fails,
let firmware request multiple blocks of DMA memory with smaller size.
This also fixes an unnecessary error message seen during ath11k probe on
QCA6390:
ath11k_pci 0000:06:00.0: Respond mem req failed, result: 1, err: 0
ath11k_pci 0000:06:00.0: qmi failed to respond fw mem req:-22
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1608127593-15192-1-git-send-email-kvalo@codeaurora.org
Pull networking fixes from Jakub Kicinski:
"Current release - always broken:
- net/smc: fix access to parent of an ib device
- devlink: use _BITUL() macro instead of BIT() in the UAPI header
- handful of mptcp fixes
Previous release - regressions:
- intel: AF_XDP: clear the status bits for the next_to_use descriptor
- dpaa2-eth: fix the size of the mapped SGT buffer
Previous release - always broken:
- mptcp: fix security context on server socket
- ethtool: fix string set id check
- ethtool: fix error paths in ethnl_set_channels()
- lan743x: fix rx_napi_poll/interrupt ping-pong
- qca: ar9331: fix sleeping function called from invalid context bug"
* tag 'net-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (32 commits)
net/sched: sch_taprio: reset child qdiscs before freeing them
nfp: move indirect block cleanup to flower app stop callback
octeontx2-af: Fix undetected unmap PF error check
net: nixge: fix spelling mistake in Kconfig: "Instuments" -> "Instruments"
qlcnic: Fix error code in probe
mptcp: fix pending data accounting
mptcp: push pending frames when subflow has free space
mptcp: properly annotate nested lock
mptcp: fix security context on server socket
net/mlx5: Fix compilation warning for 32-bit platform
mptcp: clear use_ack and use_map when dropping other suboptions
devlink: use _BITUL() macro instead of BIT() in the UAPI header
net: korina: fix return value
net/smc: fix access to parent of an ib device
ethtool: fix error paths in ethnl_set_channels()
nfc: s3fwrn5: Remove unused NCI prop commands
nfc: s3fwrn5: Remove the delay for NFC sleep
phy: fix kdoc warning
tipc: do sanity check payload of a netlink message
use __netdev_notify_peers in hyperv
...
Pull powerpc updates from Michael Ellerman:
- Switch to the generic C VDSO, as well as some cleanups of our VDSO
setup/handling code.
- Support for KUAP (Kernel User Access Prevention) on systems using the
hashed page table MMU, using memory protection keys.
- Better handling of PowerVM SMT8 systems where all threads of a core
do not share an L2, allowing the scheduler to make better scheduling
decisions.
- Further improvements to our machine check handling.
- Show registers when unwinding interrupt frames during stack traces.
- Improvements to our pseries (PowerVM) partition migration code.
- Several series from Christophe refactoring and cleaning up various
parts of the 32-bit code.
- Other smaller features, fixes & cleanups.
Thanks to: Alan Modra, Alexey Kardashevskiy, Andrew Donnellan, Aneesh
Kumar K.V, Ard Biesheuvel, Athira Rajeev, Balamuruhan S, Bill Wendling,
Cédric Le Goater, Christophe Leroy, Christophe Lombard, Colin Ian King,
Daniel Axtens, David Hildenbrand, Frederic Barrat, Ganesh Goudar,
Gautham R. Shenoy, Geert Uytterhoeven, Giuseppe Sacco, Greg Kurz,
Harish, Jan Kratochvil, Jordan Niethe, Kaixu Xia, Laurent Dufour,
Leonardo Bras, Madhavan Srinivasan, Mahesh Salgaonkar, Mathieu
Desnoyers, Nathan Lynch, Nicholas Piggin, Oleg Nesterov, Oliver
O'Halloran, Oscar Salvador, Po-Hsu Lin, Qian Cai, Qinglang Miao, Randy
Dunlap, Ravi Bangoria, Sachin Sant, Sandipan Das, Sebastian Andrzej
Siewior , Segher Boessenkool, Srikar Dronamraju, Tyrel Datwyler, Uwe
Kleine-König, Vincent Stehlé, Youling Tang, and Zhang Xiaoxu.
* tag 'powerpc-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (304 commits)
powerpc/32s: Fix cleanup_cpu_mmu_context() compile bug
powerpc: Add config fragment for disabling -Werror
powerpc/configs: Add ppc64le_allnoconfig target
powerpc/powernv: Rate limit opal-elog read failure message
powerpc/pseries/memhotplug: Quieten some DLPAR operations
powerpc/ps3: use dma_mapping_error()
powerpc: force inlining of csum_partial() to avoid multiple csum_partial() with GCC10
powerpc/perf: Fix Threshold Event Counter Multiplier width for P10
powerpc/mm: Fix hugetlb_free_pmd_range() and hugetlb_free_pud_range()
KVM: PPC: Book3S HV: Fix mask size for emulated msgsndp
KVM: PPC: fix comparison to bool warning
KVM: PPC: Book3S: Assign boolean values to a bool variable
powerpc: Inline setup_kup()
powerpc/64s: Mark the kuap/kuep functions non __init
KVM: PPC: Book3S HV: XIVE: Add a comment regarding VP numbering
powerpc/xive: Improve error reporting of OPAL calls
powerpc/xive: Simplify xive_do_source_eoi()
powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_EOI_FW
powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_MASK_FW
powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_SHIFT_BUG
...
When removing VFs for PF added to bridge there was
an error I40E_AQ_RC_EINVAL. It was caused by not properly
resetting and reinitializing PF when adding/removing VFs.
Changed how reset is performed when adding/removing VFs
to properly reinitialize PFs VSI.
Fixes: fc60861e9b ("i40e: start up in VEPA mode by default")
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The indirect block cleanup may cause control messages to be sent
if offloaded flows are present. However, by the time the flower app
cleanup callback is called txbufs are no longer available and attempts
to send control messages result in a NULL-pointer dereference in
nfp_ctrl_tx_one().
This problem may be resolved by moving the indirect block cleanup
to the stop callback, where txbufs are still available.
As suggested by Jakub Kicinski and Louis Peens.
Fixes: a1db217861 ("net: flow_offload: fix flow_indr_dev_unregister path")
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Louis Peens <louis.peens@netronome.com>
Link: https://lore.kernel.org/r/20201216145701.30005-1-simon.horman@netronome.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently the check for an unmap PF error is always going to be false
because intr_val is a 32 bit int and is being bit-mask checked against
1ULL << 32. Fix this by making intr_val a u64 to match the type at it
is copied from, namely npa_event_context->npa_af_rvu_ge.
Addresses-Coverity: ("Operands don't affect result")
Fixes: f1168d1e20 ("octeontx2-af: Add devlink health reporters for NPA")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: George Cherian <george.cherian@marvell.com>
Link: https://lore.kernel.org/r/20201216123604.15369-1-colin.king@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The "if (!ret)" condition is inverted and it should be "if (ret)". It means
that we return success when we had intended to return an error code. This also
caused a spurious warning even when the suspend was successful:
[ 297.186612] ath11k_pci 0000:06:00.0: failed to suspend hif: 0
Fixes: d1b0c33850 ("ath11k: implement suspend for QCA6390 PCI devices")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/X9nF17L2/EKOSbn/@mwanda
For QCA6390, bss peer must be created before vdev is to start. This
change is to start vdev if a bss peer is created. Otherwise, ath11k
delays to start vdev.
This fixes an issue in a case where HT/VHT/HE settings change between
authentication and association, e.g., due to the user space request
to disable HT.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201211051358.9191-1-cjhuang@codeaurora.org
Pull xen updates from Juergen Gross:
"Fixes for security issues just having been disclosed:
- a five patch series for fixing of XSA-349 (DoS via resource
depletion in Xen dom0)
- a patch fixing XSA-350 (access of stale pointer in a Xen dom0)"
* tag 'for-linus-5.11-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen-blkback: set ring->xenblkd to NULL after kthread_stop()
xenbus/xenbus_backend: Disallow pending watch messages
xen/xenbus: Count pending messages for each watch
xen/xenbus/xen_bus_type: Support will_handle watch callback
xen/xenbus: Add 'will_handle' callback support in xenbus_watch_path()
xen/xenbus: Allow watches discard events before queueing
Start to use the lockless version of netdev_notify_peers.
Call the helper where notify variable used to be set true.
Remove the notify bool variable and sort the variables
in reverse Christmas tree order.
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch fixes an error condition triggered when the code path which
transmits a S/G frame descriptor when the skb's headroom is not enough
for DPAA2's needs.
We are greated with a splat like the one below when a SGT structure is
recycled and that is because even though a dma_unmap is performed on the
Tx confirmation path, the unmap is not done with the proper size.
[ 714.464927] WARNING: CPU: 13 PID: 0 at drivers/iommu/io-pgtable-arm.c:281 __arm_lpae_map+0x2d4/0x30c
(...)
[ 714.465343] Call trace:
[ 714.465348] __arm_lpae_map+0x2d4/0x30c
[ 714.465353] __arm_lpae_map+0x114/0x30c
[ 714.465357] __arm_lpae_map+0x114/0x30c
[ 714.465362] __arm_lpae_map+0x114/0x30c
[ 714.465366] arm_lpae_map+0xf4/0x180
[ 714.465373] arm_smmu_map+0x4c/0xc0
[ 714.465379] __iommu_map+0x100/0x2bc
[ 714.465385] iommu_map_atomic+0x20/0x30
[ 714.465391] __iommu_dma_map+0xb0/0x110
[ 714.465397] iommu_dma_map_page+0xb8/0x120
[ 714.465404] dma_map_page_attrs+0x1a8/0x210
[ 714.465413] __dpaa2_eth_tx+0x384/0xbd0 [fsl_dpaa2_eth]
[ 714.465421] dpaa2_eth_tx+0x84/0x134 [fsl_dpaa2_eth]
[ 714.465427] dev_hard_start_xmit+0x10c/0x2b0
[ 714.465433] sch_direct_xmit+0x1a0/0x550
(...)
The dpaa2-eth driver uses an area of software annotations to transmit
necessary information from the Tx path to the Tx confirmation one. This
SWA structure has a different layout for each kind of frame that we are
dealing with: linear, S/G or XDP.
The commit referenced was incorrectly setting up the 'sgt_size' field
for the S/G type of SWA even though we are dealing with a linear skb
here.
Fixes: d70446ee1f ("dpaa2-eth: send a scatter-gather FD instead of realloc-ing")
Reported-by: Daniel Thompson <daniel.thompson@linaro.org>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20201211171607.108034-1-ciorneiioana@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull selinux updates from Paul Moore:
"While we have a small number of SELinux patches for v5.11, there are a
few changes worth highlighting:
- Change the LSM network hooks to pass flowi_common structs instead
of the parent flowi struct as the LSMs do not currently need the
full flowi struct and they do not have enough information to use it
safely (missing information on the address family).
This patch was discussed both with Herbert Xu (representing team
netdev) and James Morris (representing team
LSMs-other-than-SELinux).
- Fix how we handle errors in inode_doinit_with_dentry() so that we
attempt to properly label the inode on following lookups instead of
continuing to treat it as unlabeled.
- Tweak the kernel logic around allowx, auditallowx, and dontauditx
SELinux policy statements such that the auditx/dontauditx are
effective even without the allowx statement.
Everything passes our test suite"
* tag 'selinux-pr-20201214' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
lsm,selinux: pass flowi_common instead of flowi to the LSM hooks
selinux: Fix fall-through warnings for Clang
selinux: drop super_block backpointer from superblock_security_struct
selinux: fix inode_doinit_with_dentry() LABEL_INVALID error handling
selinux: allow dontauditx and auditallowx rules to take effect without allowx
selinux: fix error initialization in inode_doinit_with_dentry()
On the Rx side, the next_to_use index points to the next item in the
HW ring to be refilled/allocated, and next_to_clean points to the next
item to potentially be processed.
When the HW Rx ring is fully refilled, i.e. no packets has been
processed, the next_to_use will be next_to_clean - 1. When the ring is
fully processed next_to_clean will be equal to next_to_use. The latter
case is where a bug is triggered.
If the next_to_use bits are not cleared, and the "fully processed"
state is entered, a stale descriptor can be processed.
The skb-path correctly clear the status bit for the next_to_use
descriptor, but the AF_XDP zero-copy path did not do that.
This change adds the status bits clearing of the next_to_use
descriptor.
Fixes: 3b4f0b66c2 ("i40e, xsk: Migrate to new MEM_TYPE_XSK_BUFF_POOL")
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On the Rx side, the next_to_use index points to the next item in the
HW ring to be refilled/allocated, and next_to_clean points to the next
item to potentially be processed.
When the HW Rx ring is fully refilled, i.e. no packets has been
processed, the next_to_use will be next_to_clean - 1. When the ring is
fully processed next_to_clean will be equal to next_to_use. The latter
case is where a bug is triggered.
If the next_to_use bits are not cleared, and the "fully processed"
state is entered, a stale descriptor can be processed.
The skb-path correctly clear the status bit for the next_to_use
descriptor, but the AF_XDP zero-copy path did not do that.
This change adds the status bits clearing of the next_to_use
descriptor.
Fixes: 2d4238f556 ("ice: Add support for AF_XDP")
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Even if there is more rx data waiting on the chip, the rx napi poll fn
will never run more than once - it will always read a few buffers, then
bail out and re-arm interrupts. Which results in ping-pong between napi
and interrupt.
This defeats the purpose of napi, and is bad for performance.
Fix by making the rx napi poll behave identically to other ethernet
drivers:
1. initialize rx napi polling with an arbitrary budget (64).
2. in the polling fn, return full weight if rx queue is not depleted,
this tells the napi core to "keep polling".
3. update the rx tail ("ring the doorbell") once for every 8 processed
rx ring buffers.
Thanks to Jakub Kicinski, Eric Dumazet and Andrew Lunn for their expert
opinions and suggestions.
Tested with 20 seconds of full bandwidth receive (iperf3):
rx irqs softirqs(NET_RX)
-----------------------------
before 23827 33620
after 129 4081
Tested-by: Sven Van Asbroeck <thesven73@gmail.com> # lan7430
Fixes: 23f0703c12 ("lan743x: Add main source files for new lan743x driver")
Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com>
Link: https://lore.kernel.org/r/20201215161954.5950-1-TheSven73@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull asm-generic cross-architecture timer cleanup from Arnd Bergmann:
"This cleans up two ancient timer features that were never completed in
the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET.
There was only one user left for the ARCH_USES_GETTIMEOFFSET variant
of clocksource implementations, the ARM EBSA110 platform. Rather than
changing to use modern timekeeping, we remove the platform entirely as
Russell no longer uses his machine and nobody else seems to have one
any more.
The conditional code for using arch_gettimeoffset() is removed as a
result.
For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms
not using clockevent drivers: parisc, ia64, most of m68k, and one Arm
platform. These all do timer ticks slighly differently, and this gets
cleaned up to the point they at least all call the same helper
function.
Instead of most platforms using 'select GENERIC_CLOCKEVENTS' in
Kconfig, the polarity is now reversed, with the few remaining ones
selecting LEGACY_TIMER_TICK instead"
* tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
timekeeping: default GENERIC_CLOCKEVENTS to enabled
timekeeping: remove xtime_update
m68k: remove timer_interrupt() function
m68k: change remaining timers to legacy_timer_tick
m68k: m68328: use legacy_timer_tick()
m68k: sun3/sun3c: use legacy_timer_tick
m68k: split heartbeat out of timer function
m68k: coldfire: use legacy_timer_tick()
parisc: use legacy_timer_tick
ARM: rpc: use legacy_timer_tick
ia64: convert to legacy_timer_tick
timekeeping: add CONFIG_LEGACY_TIMER_TICK
timekeeping: remove arch_gettimeoffset
net: remove am79c961a driver
ARM: remove ebsa110 platform
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big USB and thunderbolt pull request for 5.11-rc1.
Nothing major in here, just the grind of constant development to
support new hardware and fix old issues:
- thunderbolt updates for new USB4 hardware
- cdns3 major driver updates
- lots of typec updates and additions as more hardware is available
- usb serial driver updates and fixes
- other tiny USB driver updates
All have been in linux-next with no reported issues"
* tag 'usb-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits)
usb: phy: convert comma to semicolon
usb: ucsi: convert comma to semicolon
usb: typec: tcpm: convert comma to semicolon
usb: typec: tcpm: Update vbus_vsafe0v on init
usb: typec: tcpci: Enable bleed discharge when auto discharge is enabled
usb: typec: Add class for plug alt mode device
USB: typec: tcpci: Add Bleed discharge to POWER_CONTROL definition
USB: typec: tcpm: Add a 30ms room for tPSSourceOn in PR_SWAP
USB: typec: tcpm: Fix PR_SWAP error handling
USB: typec: tcpm: Hard Reset after not receiving a Request
USB: gadget: f_fs: remove likely/unlikely
usb: gadget: f_fs: Re-use SS descriptors for SuperSpeedPlus
USB: gadget: f_midi: setup SuperSpeed Plus descriptors
USB: gadget: f_acm: add support for SuperSpeed Plus
USB: gadget: f_rndis: fix bitrate for SuperSpeed and above
usb: typec: intel_pmc_mux: Configure cable generation value for USB4
MAINTAINERS: Add myself as a reviewer for CADENCE USB3 DRD IP DRIVER
usb: chipidea: ci_hdrc_imx: Use of_device_get_match_data()
usb: chipidea: usbmisc_imx: Use of_device_get_match_data()
usb: cdns3: fix NULL pointer dereference on no platform data
...
Pull networking updates from Jakub Kicinski:
"Core:
- support "prefer busy polling" NAPI operation mode, where we defer
softirq for some time expecting applications to periodically busy
poll
- AF_XDP: improve efficiency by more batching and hindering the
adjacency cache prefetcher
- af_packet: make packet_fanout.arr size configurable up to 64K
- tcp: optimize TCP zero copy receive in presence of partial or
unaligned reads making zero copy a performance win for much smaller
messages
- XDP: add bulk APIs for returning / freeing frames
- sched: support fragmenting IP packets as they come out of conntrack
- net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs
BPF:
- BPF switch from crude rlimit-based to memcg-based memory accounting
- BPF type format information for kernel modules and related tracing
enhancements
- BPF implement task local storage for BPF LSM
- allow the FENTRY/FEXIT/RAW_TP tracing programs to use
bpf_sk_storage
Protocols:
- mptcp: improve multiple xmit streams support, memory accounting and
many smaller improvements
- TLS: support CHACHA20-POLY1305 cipher
- seg6: add support for SRv6 End.DT4/DT6 behavior
- sctp: Implement RFC 6951: UDP Encapsulation of SCTP
- ppp_generic: add ability to bridge channels directly
- bridge: Connectivity Fault Management (CFM) support as is defined
in IEEE 802.1Q section 12.14.
Drivers:
- mlx5: make use of the new auxiliary bus to organize the driver
internals
- mlx5: more accurate port TX timestamping support
- mlxsw:
- improve the efficiency of offloaded next hop updates by using
the new nexthop object API
- support blackhole nexthops
- support IEEE 802.1ad (Q-in-Q) bridging
- rtw88: major bluetooth co-existance improvements
- iwlwifi: support new 6 GHz frequency band
- ath11k: Fast Initial Link Setup (FILS)
- mt7915: dual band concurrent (DBDC) support
- net: ipa: add basic support for IPA v4.5
Refactor:
- a few pieces of in_interrupt() cleanup work from Sebastian Andrzej
Siewior
- phy: add support for shared interrupts; get rid of multiple driver
APIs and have the drivers write a full IRQ handler, slight growth
of driver code should be compensated by the simpler API which also
allows shared IRQs
- add common code for handling netdev per-cpu counters
- move TX packet re-allocation from Ethernet switch tag drivers to a
central place
- improve efficiency and rename nla_strlcpy
- number of W=1 warning cleanups as we now catch those in a patchwork
build bot
Old code removal:
- wan: delete the DLCI / SDLA drivers
- wimax: move to staging
- wifi: remove old WDS wifi bridging support"
* tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits)
net: hns3: fix expression that is currently always true
net: fix proc_fs init handling in af_packet and tls
nfc: pn533: convert comma to semicolon
af_vsock: Assign the vsock transport considering the vsock address flags
af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path
vsock_addr: Check for supported flag values
vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag
vm_sockets: Add flags field in the vsock address data structure
net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled
tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit
net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context
nfc: s3fwrn5: Release the nfc firmware
net: vxget: clean up sparse warnings
mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router
mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3
mlxsw: spectrum_router_xm: Introduce basic XM cache flushing
mlxsw: reg: Add Router LPM Cache Enable Register
mlxsw: reg: Add Router LPM Cache ML Delete Register
mlxsw: spectrum_router_xm: Implement L-value tracking for M-index
mlxsw: reg: Add XM Router M Table Register
...
Using the interrupt affinity mask for checking locality is not really
working well on architectures which support effective affinity masks.
The affinity mask is either the system wide default or set by user space,
but the architecture can or even must reduce the mask to the effective set,
which means that checking the affinity mask itself does not really tell
about the actual target CPUs.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20201210194044.876342330@linutronix.de
No driver has any business with the internals of an interrupt
descriptor. Storing a pointer to it just to use yet another helper at the
actual usage site to retrieve the affinity mask is creative at best. Just
because C does not allow encapsulation does not mean that the kernel has no
limits.
Retrieve a pointer to the affinity mask itself and use that. It's still
using an interface which is usually not for random drivers, but definitely
less hideous than the previous hack.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20201210194044.769458162@linutronix.de
Using the interrupt affinity mask for checking locality is not really
working well on architectures which support effective affinity masks.
The affinity mask is either the system wide default or set by user space,
but the architecture can or even must reduce the mask to the effective set,
which means that checking the affinity mask itself does not really tell
about the actual target CPUs.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20201210194044.672935978@linutronix.de
No driver has any business with the internals of an interrupt
descriptor. Storing a pointer to it just to use yet another helper at the
actual usage site to retrieve the affinity mask is creative at best. Just
because C does not allow encapsulation does not mean that the kernel has no
limits.
Retrieve a pointer to the affinity mask itself and use that. It's still
using an interface which is usually not for random drivers, but definitely
less hideous than the previous hack.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20201210194044.580936243@linutronix.de
The || condition in hdev->fd_active_type != HCLGE_FD_ARFS_ACTIVE ||
hdev->fd_active_type != HCLGE_FD_RULE_NONE will always be true because
hdev->fd_active_type cannot be equal to two different values at the same
time. The expression is always true which is not correct. Fix this by
replacing || with && to correct the logic in the expression.
Addresses-Coverity: ("Constant expression result")
Fixes: 0205ec041e ("net: hns3: add support for hw tc offload of tc flower")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Huazhong Tan <tanhuazhong@huawei.com>
Link: https://lore.kernel.org/r/20201215000033.85383-1-colin.king@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently ocelot_set_rx_mode calls ocelot_mact_learn directly, which has
a very nice ocelot_mact_wait_for_completion at the end. Introduced in
commit 639c1b2625 ("net: mscc: ocelot: Register poll timeout should be
wall time not attempts"), this function uses readx_poll_timeout which
triggers a lot of lockdep warnings and is also dangerous to use from
atomic context, potentially leading to lockups and panics.
Steen Hegelund added a poll timeout of 100 ms for checking the MAC
table, a duration which is clearly absurd to poll in atomic context.
So we need to defer the MAC table access to process context, which we do
via a dynamically allocated workqueue which contains all there is to
know about the MAC table operation it has to do.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20201212191612.222019-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This code is copying strings in 64 bit quantities, the device
returns them in big endian. As long as we store in big endian
IOW endian on both sides matches, we're good, so swap to_be64,
not from be64.
This fixes ~60 sparse warnings.
Link: https://lore.kernel.org/r/20201212234426.177015-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Marc Kleine-Budde says:
====================
pull-request: can-next 2020-12-14
All 7 patches are by me and target the m_can driver. First there are 4 cleanup
patches (fix link to doc, fix coding style, uniform variable name usage, mark
function as static). Then the driver is converted to
pm_runtime_resume_and_get(). The next patch lets the m_can class driver
allocate the driver's private data, to get rid of one level of indirection. And
the last patch consistently uses struct m_can_classdev as drvdata over all
binding drivers.
* tag 'linux-can-next-for-5.11-20201214' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: m_can: use struct m_can_classdev as drvdata
can: m_can: let m_can_class_allocate_dev() allocate driver specific private data
can: m_can: m_can_clk_start(): make use of pm_runtime_resume_and_get()
can: m_can: m_can_config_endisable(): mark as static
can: m_can: use cdev as name for struct m_can_classdev uniformly
can: m_can: convert indention to kernel coding style
can: m_can: update link to M_CAN user manual
====================
Link: https://lore.kernel.org/r/20201214133145.442472-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case the eXtended mezzanine is present on the system, use it for IPv4
router offload.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Set a profile option to instruct FW to use 1/2 of KVH for XLT cache, not
the whole one.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Upon route insertion and removal, it is needed to flush possibly cached
entries from the XM cache. Extend XM op context to carry information
needed for the flush. Implement the flush in delayed work since for HW
design reasons there is a need to wait 50usec before the flush can be
done. If during this time comes the same flush request, consolidate it
to the first one. Implement this queued flushes by a hashtable.
v2:
* Fix GENMASK() high bit
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The RLPMCE allows disabling the LPM cache. Can be changed on the fly.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The RLCMLD register is used to bulk delete the XLT-LPM cache ML entries.
This can be used by SW when L is increased or decreased, thus need to
remove entries with old ML values.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
