The patched code is used to get chunks number, should use round-up div
to replace current sector_div. The same code is in md_bitmap_resize():
```
chunks = DIV_ROUND_UP_SECTOR_T(blocks, 1 << chunkshift);
```
Signed-off-by: Zhao Heming <heming.zhao@suse.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
It is unnecessary to force request-based DM to call into bio-based
dm_submit_bio (via indirect disk->fops->submit_bio) only to have it then
call blk_mq_submit_bio().
Fix this by establishing a request-based DM block_device_operations
(dm_rq_blk_dops, which doesn't have .submit_bio) and update
dm_setup_md_queue() to set md->disk->fops to it for
DM_TYPE_REQUEST_BASED.
Remove DM_TYPE_REQUEST_BASED conditional in dm_submit_bio and unexport
blk_mq_submit_bio.
Fixes: c62b37d96b ("block: move ->make_request_fn to struct block_device_operations")
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Since commit 5a6c35f9af ("block: remove direct_make_request") there
is no benefit to DM special-casing NVMe. Remove all code used to
establish DM_TYPE_NVME_BIO_BASED.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
In reaction to a proposal to introduce a memcpy_mcsafe_fast()
implementation Linus points out that memcpy_mcsafe() is poorly named
relative to communicating the scope of the interface. Specifically what
addresses are valid to pass as source, destination, and what faults /
exceptions are handled.
Of particular concern is that even though x86 might be able to handle
the semantics of copy_mc_to_user() with its common copy_user_generic()
implementation other archs likely need / want an explicit path for this
case:
On Fri, May 1, 2020 at 11:28 AM Linus Torvalds <torvalds@linux-foundation.org> wrote:
>
> On Thu, Apr 30, 2020 at 6:21 PM Dan Williams <dan.j.williams@intel.com> wrote:
> >
> > However now I see that copy_user_generic() works for the wrong reason.
> > It works because the exception on the source address due to poison
> > looks no different than a write fault on the user address to the
> > caller, it's still just a short copy. So it makes copy_to_user() work
> > for the wrong reason relative to the name.
>
> Right.
>
> And it won't work that way on other architectures. On x86, we have a
> generic function that can take faults on either side, and we use it
> for both cases (and for the "in_user" case too), but that's an
> artifact of the architecture oddity.
>
> In fact, it's probably wrong even on x86 - because it can hide bugs -
> but writing those things is painful enough that everybody prefers
> having just one function.
Replace a single top-level memcpy_mcsafe() with either
copy_mc_to_user(), or copy_mc_to_kernel().
Introduce an x86 copy_mc_fragile() name as the rename for the
low-level x86 implementation formerly named memcpy_mcsafe(). It is used
as the slow / careful backend that is supplanted by a fast
copy_mc_generic() in a follow-on patch.
One side-effect of this reorganization is that separating copy_mc_64.S
to its own file means that perf no longer needs to track dependencies
for its memcpy_64.S benchmarks.
[ bp: Massage a bit. ]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: <stable@vger.kernel.org>
Link: http://lore.kernel.org/r/CAHk-=wjSqtXAqfUJxFtWNwmguFASTgB0dz1dT3V-78Quiezqbg@mail.gmail.com
Link: https://lkml.kernel.org/r/160195561680.2163339.11574962055305783722.stgit@dwillia2-desk3.amr.corp.intel.com
bio_crypt_clone() assumes its gfp_mask argument always includes
__GFP_DIRECT_RECLAIM, so that the mempool_alloc() will always succeed.
However, bio_crypt_clone() might be called with GFP_ATOMIC via
setup_clone() in drivers/md/dm-rq.c, or with GFP_NOWAIT via
kcryptd_io_read() in drivers/md/dm-crypt.c.
Neither case is currently reachable with a bio that actually has an
encryption context. However, it's fragile to rely on this. Just make
bio_crypt_clone() able to fail, analogous to bio_integrity_clone().
Reported-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Satya Tangirala <satyat@google.com>
Cc: Satya Tangirala <satyat@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since bcache code was merged into mainline kerrnel, each cache set only
as one single cache in it. The multiple caches framework is here but the
code is far from completed. Considering the multiple copies of cached
data can also be stored on e.g. md raid1 devices, it is unnecessary to
support multiple caches in one cache set indeed.
The previous preparation patches fix the dependencies of explicitly
making a cache set only have single cache. Now we don't have to maintain
an embedded partial super block in struct cache_set, the in-memory super
block can be directly referenced from struct cache.
This patch removes the embedded struct cache_sb from struct cache_set,
and fixes all locations where the superb lock was referenced from this
removed super block by referencing the in-memory super block of struct
cache.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently the cache's sync status is checked and set on cache set's in-
memory partial super block. After removing the embedded struct cache_sb
from cache set and reference cache's in-memory super block from struct
cache_set, the sync status can set and check directly on cache's super
block.
This patch checks and sets the cache sync status directly on cache's
in-memory super block. This is a preparation for later removing embedded
struct cache_sb from struct cache_set.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After removing the embedded struct cache_sb from struct cache_set, cache
set will directly reference the in-memory super block of struct cache.
It is unnecessary to compare block_size, bucket_size and nr_in_set from
the identical in-memory super block in can_attach_cache().
This is a preparation patch for latter removing cache_set->sb from
struct cache_set.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In order to update the partial super block of cache set, the seq numbers
of cache and cache set are checked in register_cache_set(). If cache's
seq number is larger than cache set's seq number, cache set must update
its partial super block from cache's super block. It is unncessary when
the embedded struct cache_sb is removed from struct cache set.
This patch removed the seq numbers checking from register_cache_set(),
because later there will be no such partial super block in struct cache
set, the cache set will directly reference in-memory super block from
struct cache. This is a preparation patch for removing embedded struct
cache_sb from struct cache_set.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Because struct cache_set and struct cache both have struct cache_sb,
macro bucket_bytes() currently are used on both of them. When removing
the embedded struct cache_sb from struct cache_set, this macro won't be
used on struct cache_set anymore.
This patch unifies all bucket_bytes() usage only on struct cache, this is
one of the preparation to remove the embedded struct cache_sb from
struct cache_set.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It seems alloc_bucket_pages() is the only user of bucket_pages().
Considering alloc_bucket_pages() is removed from bcache code, it is safe
to remove the useless macro bucket_pages() now.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now no one uses alloc_bucket_pages() anymore, remove it from bcache.h.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Because struct cache_set and struct cache both have struct cache_sb,
therefore macro block_bytes() can be used on both of them. When removing
the embedded struct cache_sb from struct cache_set, this macro won't be
used on struct cache_set anymore.
This patch unifies all block_bytes() usage only on struct cache, this is
one of the preparation to remove the embedded struct cache_sb from
struct cache_set.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch adds a separated set_uuid[16] in struct cache_set, to store
the uuid of the cache set. This is the preparation to remove the
embedded struct cache_sb from struct cache_set.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since now each cache_set explicitly has single cache, for_each_cache()
is unnecessary. This patch removes this macro, and update all locations
where it is used, and makes sure all code logic still being consistent.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently although the bcache code has a framework for multiple caches
in a cache set, but indeed the multiple caches never completed and users
use md raid1 for multiple copies of the cached data.
This patch does the following change in struct cache_set, to explicitly
make a cache_set only have single cache,
- Change pointer array "*cache[MAX_CACHES_PER_SET]" to a single pointer
"*cache".
- Remove pointer array "*cache_by_alloc[MAX_CACHES_PER_SET]".
- Remove "caches_loaded".
Now the code looks as exactly what it does in practic: only one cache is
used in the cache set.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The parameter 'int n' from bch_bucket_alloc_set() is not cleared
defined. From the code comments n is the number of buckets to alloc, but
from the code itself 'n' is the maximum cache to iterate. Indeed all the
locations where bch_bucket_alloc_set() is called, 'n' is alwasy 1.
This patch removes the confused and unnecessary 'int n' from parameter
list of bch_bucket_alloc_set(), and explicitly allocates only 1 bucket
for its caller.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
As inode->iprivate equals to third parameter of
debugfs_create_file() which is NULL. So it's equivalent
to original code logic.
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In mca_reserve(c) macro, we are checking root whether is NULL or not.
But that's not enough, when we read the root node in run_cache_set(),
if we got an error in bch_btree_node_read_done(), we will return
ERR_PTR(-EIO) to c->root.
And then we will go continue to unregister, but before calling
unregister_shrinker(&c->shrink), there is a possibility to call
bch_mca_count(), and we would get a crash with call trace like that:
[ 2149.876008] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000b5
... ...
[ 2150.598931] Call trace:
[ 2150.606439] bch_mca_count+0x58/0x98 [escache]
[ 2150.615866] do_shrink_slab+0x54/0x310
[ 2150.624429] shrink_slab+0x248/0x2d0
[ 2150.632633] drop_slab_node+0x54/0x88
[ 2150.640746] drop_slab+0x50/0x88
[ 2150.648228] drop_caches_sysctl_handler+0xf0/0x118
[ 2150.657219] proc_sys_call_handler.isra.18+0xb8/0x110
[ 2150.666342] proc_sys_write+0x40/0x50
[ 2150.673889] __vfs_write+0x48/0x90
[ 2150.681095] vfs_write+0xac/0x1b8
[ 2150.688145] ksys_write+0x6c/0xd0
[ 2150.695127] __arm64_sys_write+0x24/0x30
[ 2150.702749] el0_svc_handler+0xa0/0x128
[ 2150.710296] el0_svc+0x8/0xc
Signed-off-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Previously the experimental async registration uses a separate sysfs
file register_async. Now the async registration code seems working well
for a while, we can do furtuher testing with it now.
This patch changes the async bcache registration shares the same sysfs
file /sys/fs/bcache/register (and register_quiet). Async registration
will be default behavior if BCACHE_ASYNC_REGISTRATION is set in kernel
configure. By default, BCACHE_ASYNC_REGISTRATION is not configured yet.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
dm_process_bio() is only called by dm_submit_bio(), there is no benefit
to keeping dm_process_bio() factored out, so fold it.
While at it, cleanup dm_submit_bio()'s DMF_BLOCK_IO_FOR_SUSPEND related
branching and expand scope of dm_get_live_table() rcu reference on map
via common 'out' label to dm_put_live_table().
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If a DM device was suspended when bios were issued to it, those bios
would be deferred using queue_io(). Once the DM device was resumed
dm_process_bio() could be called by dm_wq_work() for original bio that
still needs splitting. dm_process_bio()'s check for current->bio_list
(meaning call chain is within ->submit_bio) as a prerequisite for
calling blk_queue_split() for "abnormal IO" would result in
dm_process_bio() never imposing corresponding queue_limits
(e.g. discard_granularity, discard_max_bytes, etc).
Fix this by always having dm_wq_work() resubmit deferred bios using
submit_bio_noacct().
Side-effect is blk_queue_split() is always called for "abnormal IO" from
->submit_bio, be it from application thread or dm_wq_work() workqueue,
so proper bio splitting and depth-first bio submission is performed.
For sake of clarity, remove current->bio_list check before call to
blk_queue_split().
Also, remove dm_wq_work()'s use of dm_{get,put}_live_table() -- no
longer needed since IO will be reissued in terms of ->submit_bio.
And rename bio variable from 'c' to 'bio'.
Fixes: cf9c378655 ("dm: fix comment in dm_process_bio()")
Reported-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The local variable disk details is not used during the creating of thin & snap
devices. Remove them from dm-thin-metadata, and add pointer validity check for
pointer value in btree_lookup_raw. Skip memory copy when the caller doesn't need
the value.
Signed-off-by: Huaisheng Ye <yehs1@lenovo.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Block core warned that discard_granularity was 0 for dm-raid with
personality of raid1. Reason is that raid_io_hints() was incorrectly
special-casing raid1 rather than raid0.
But since commit 29efc390b9 ("md/md0: optimize raid0 discard
handling") even raid0 properly handles large discards.
Fix raid_io_hints() by removing discard limits settings for raid1.
Also, fix limits for raid10 by properly stacking underlying limits as
done in blk_stack_limits().
Depends-on: 29efc390b9 ("md/md0: optimize raid0 discard handling")
Fixes: 61697a6abd ("dm: eliminate 'split_discard_bios' flag from DM target interface")
Cc: stable@vger.kernel.org
Reported-by: Zdenek Kabelac <zkabelac@redhat.com>
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Don't use crypto drivers that have the flag CRYPTO_ALG_ALLOCATES_MEMORY
set. These drivers allocate memory and thus they are unsuitable for block
I/O processing.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Move 'struct dm_table' definition from dm-table.c to dm-core.h and
update DM core to access its members directly.
Helps optimize max_io_len() and other methods slightly.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Only call bio_op() once in switch statement. Also remove the
excessive factoring out to one line functions.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Saves redundant dm_target_offset() math.
Also, reverse argument order for max_io_len() to be consistent with
other similar functions.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Using blk_max_size_offset() enables DM core's splitting to impose
ti->max_io_len (via q->limits.chunk_sectors) and also fallback to
respecting q->limits.max_sectors if chunk_sectors isn't set.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If target set ti->max_io_len it must be used when stacking
DM device's queue_limits to establish a 'chunk_sectors' that is
compatible with the IO stack.
By using lcm_not_zero() care is taken to avoid blindly overriding the
chunk_sectors limit stacked up by blk_stack_limits().
Depends-on: 07d098e6bb ("block: allow 'chunk_sectors' to be non-power-of-2")
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
DM depends on these block 5.10 commits:
22ada802ed block: use lcm_not_zero() when stacking chunk_sectors
07d098e6bb block: allow 'chunk_sectors' to be non-power-of-2
021a24460d block: add QUEUE_FLAG_NOWAIT
6abc49468e dm: add support for REQ_NOWAIT and enable it for linear target
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Add DM target feature flag DM_TARGET_NOWAIT which advertises that
target works with REQ_NOWAIT bios.
Add dm_table_supports_nowait() and update dm_table_set_restrictions()
to set/clear QUEUE_FLAG_NOWAIT accordingly.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bd_disk is set on all block devices, including those for partitions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
To check for partitions of the same disk bd_contains works as well, but
bd_disk is way more obvious.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a littler helper to make the somewhat arcane bd_contains checks a
little more obvious.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For far layout, the discard region is not continuous on disks. So it needs
far copies r10bio to cover all regions. It needs a way to know all r10bios
have finish or not. Similar with raid10_sync_request, only the first r10bio
master_bio records the discard bio. Other r10bios master_bio record the
first r10bio. The first r10bio can finish after other r10bios finish and
then return the discard bio.
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Now the discard request is split by chunk size. So it takes a long time
to finish mkfs on disks which support discard function. This patch improve
handling raid10 discard request. It uses the similar way with patch
29efc390b (md/md0: optimize raid0 discard handling).
But it's a little complex than raid0. Because raid10 has different layout.
If raid10 is offset layout and the discard request is smaller than stripe
size. There are some holes when we submit discard bio to underlayer disks.
For example: five disks (disk1 - disk5)
D01 D02 D03 D04 D05
D05 D01 D02 D03 D04
D06 D07 D08 D09 D10
D10 D06 D07 D08 D09
The discard bio just wants to discard from D03 to D10. For disk3, there is
a hole between D03 and D08. For disk4, there is a hole between D04 and D09.
D03 is a chunk, raid10_write_request can handle one chunk perfectly. So
the part that is not aligned with stripe size is still handled by
raid10_write_request.
If reshape is running when discard bio comes and the discard bio spans the
reshape position, raid10_write_request is responsible to handle this
discard bio.
I did a test with this patch set.
Without patch:
time mkfs.xfs /dev/md0
real4m39.775s
user0m0.000s
sys0m0.298s
With patch:
time mkfs.xfs /dev/md0
real0m0.105s
user0m0.000s
sys0m0.007s
nvme3n1 259:1 0 477G 0 disk
└─nvme3n1p1 259:10 0 50G 0 part
nvme4n1 259:2 0 477G 0 disk
└─nvme4n1p1 259:11 0 50G 0 part
nvme5n1 259:6 0 477G 0 disk
└─nvme5n1p1 259:12 0 50G 0 part
nvme2n1 259:9 0 477G 0 disk
└─nvme2n1p1 259:15 0 50G 0 part
nvme0n1 259:13 0 477G 0 disk
└─nvme0n1p1 259:14 0 50G 0 part
Reviewed-by: Coly Li <colyli@suse.de>
Reviewed-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
The following patch will reuse these logics, so pull the same codes into
one function.
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Now it allocs r10bio->devs[conf->copies]. Discard bio needs to submit
to all member disks and it needs to use r10bio. So extend to
r10bio->devs[geo.raid_disks].
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
#define RESYNC_SECTORS (RESYNC_BLOCK_SIZE >> 9)
"RESYNC_BLOCK_SIZE/512" is equal to "RESYNC_BLOCK_SIZE >> 9", replace it
with RESYNC_SECTORS.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
