The only usage of these structs is to assign their address to the
iv_gen_ops field in the crypt config struct, which is a pointer to
const. Make them const like the rest of the static crypt_iv_operations
structs. This allows the compiler to put them in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
commit 021a24460d ("block: add QUEUE_FLAG_NOWAIT") added a new queue
flag QUEUE_FLAG_NOWAIT to advertise if the bdev supports handling of
REQ_NOWAIT or not. DM core supports stacking QUEUE_FLAG_NOWAIT since
commit 6abc49468e ("dm: add support for REQ_NOWAIT and enable it for
linear target"), in which only dm-linear enabled it.
Update others DM targets, which just do simple remapping, to enable
support for REQ_NOWAIT.
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Additional prefix helps clarify that these source files implement path
selectors.
Required updating Makefile to still build modules _without_ the
"dm-ps" prefix to preserve dm-multipath's ability to autoload path
selector modules. While at it, cleaned up some DM whitespace in
Makefile.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
This patch adds a path selector that selects paths based on a CPU to
path mapping the user passes in and what CPU we are executing on. The
primary user for this PS is where the app is optimized to use specific
CPUs so other PSs undo the apps handy work, and the storage and it's
transport are not a bottlneck.
For these io-affinity PS setups a path's transport/interconnect
perf is not going to flucuate a lot and there is no major differences
between paths, so QL/HST smarts do not help and RR always messes up
what the app is trying to do.
On a system with 16 cores, where you have a job per CPU:
fio --filename=/dev/dm-0 --direct=1 --rw=randrw --bs=4k \
--ioengine=libaio --iodepth=128 --numjobs=16
and a dm-multipath device setup where each CPU is mapped to one path:
// When in mq mode I had to set dm_mq_nr_hw_queues=$NUM_PATHS.
// Bio mode also showed similar results.
0 16777216 multipath 0 0 1 1 io-affinity 0 16 1 8:16 1 8:32 2 8:64 4
8:48 8 8:80 10 8:96 20 8:112 40 8:128 80 8:144 100 8:160 200 8:176
400 8:192 800 8:208 1000 8:224 2000 8:240 4000 65:0 8000
we can see a IOPs increase of 25%.
The percent increase depends on the device and interconnect. For a
slower/medium speed path/device that can do around 180K IOPs a path
if you ran that fio command to it directly we saw a 25% increase like
above. Slower path'd devices that could do around 90K per path showed
maybe around a 2 - 5% increase. If you use something like null_blk or
scsi_debug which can multi-million IOPs and hack it up so each device
they export shows up as a path then you see 50%+ increases.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Add a new configuration DM_VERITY_VERIFY_ROOTHASH_SIG_SECONDARY_KEYRING
to enable dm-verity signatures to be verified against the secondary
trusted keyring. Instead of relying on the builtin trusted keyring
(with hard-coded certificates), the second trusted keyring can include
certificate authorities from the builtin trusted keyring and child
certificates loaded at run time. Using the secondary trusted keyring
enables to use dm-verity disks (e.g. loop devices) signed by keys which
did not exist at kernel build time, leveraging the certificate chain of
trust model. In practice, this makes it possible to update certificates
without kernel update and reboot, aligning with module and kernel
(kexec) signature verification which already use the secondary trusted
keyring.
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The depth-first splitting is introduced in commit 18a25da843 ("dm:
ensure bio submission follows a depth-first tree walk"), which is used
to fix the potential deadlock in case of the misordering handling of
bios caused by bio_list. There're two paths submitting split bios,
dm_wq_work() from worker thread and submit_bio() from application. Back
upon that time, dm_wq_work() thread calls __split_and_process_bio()
directly and thus will not trigger this issue since bio_list doesn't
exist here. So this issue will only be triggered from application
calling submit_bio(), and the fix has to check if current->bio_list is
non-NULL to distinguish this case.
However since commit 0c2915b8c6 ("dm: fix missing imposition of
queue_limits from dm_wq_work() thread"), dm_wq_work() thread calls
submit_bio_noacct() and thus also uses bio_list. Since then all entries
into __split_and_process_bio() are under protection of bio_list, and
thus the checking of current->bio_list when determinning if the
depth-first principle should be used, seems kind of nonsense. After all
the checking always succeeds now.
Fixes: 0c2915b8c6 ("dm: fix missing imposition of queue_limits from dm_wq_work() thread")
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Fixes sparse warnings:
drivers/md/dm.c:508:12: warning: context imbalance in 'dm_prepare_ioctl' - wrong count at exit
drivers/md/dm.c:543:13: warning: context imbalance in 'dm_unprepare_ioctl' - wrong count at exit
Fixes: 971888c469 ("dm: hold DM table for duration of ioctl rather than use blkdev_get")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Commit 882ec4e609 ("dm table: stack 'chunk_sectors' limit to account
for target-specific splitting") caused a couple regressions:
1) Using lcm_not_zero() when stacking chunk_sectors was a bug because
chunk_sectors must reflect the most limited of all devices in the
IO stack.
2) DM targets that set max_io_len but that do _not_ provide an
.iterate_devices method no longer had there IO split properly.
And commit 5091cdec56 ("dm: change max_io_len() to use
blk_max_size_offset()") also caused a regression where DM no longer
supported varied (per target) IO splitting. The implication being the
potential for severely reduced performance for IO stacks that use a DM
target like dm-cache to hide performance limitations of a slower
device (e.g. one that requires 4K IO splitting).
Coming full circle: Fix all these issues by discontinuing stacking
chunk_sectors up using ti->max_io_len in dm_calculate_queue_limits(),
add optional chunk_sectors override argument to blk_max_size_offset()
and update DM's max_io_len() to pass ti->max_io_len to its
blk_max_size_offset() call.
Passing in an optional chunk_sectors override to blk_max_size_offset()
allows for code reuse of block's centralized calculation for max IO
size based on provided offset and split boundary.
Fixes: 882ec4e609 ("dm table: stack 'chunk_sectors' limit to account for target-specific splitting")
Fixes: 5091cdec56 ("dm: change max_io_len() to use blk_max_size_offset()")
Cc: stable@vger.kernel.org
Reported-by: John Dorminy <jdorminy@redhat.com>
Reported-by: Bruce Johnston <bjohnsto@redhat.com>
Reported-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Reviewed-by: John Dorminy <jdorminy@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
We can just dereference the point in struct gendisk instead. Also
remove the now unused export.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use struct block_device to lookup partitions on a disk. This removes
all usage of struct hd_struct from the I/O path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: Chao Yu <yuchao0@huawei.com> [f2fs]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Allocate hd_struct together with struct block_device to pre-load
the lifetime rule changes in preparation of merging the two structures.
Note that part0 was previously embedded into struct gendisk, but is
a separate allocation now, and already points to the block_device instead
of the hd_struct. The lifetime of struct gendisk is still controlled by
the struct device embedded in the part0 hd_struct.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that the hd_struct always has a block device attached to it, there is
no need for having two size field that just get out of sync.
Additionally the field in hd_struct did not use proper serialization,
possibly allowing for torn writes. By only using the block_device field
this problem also gets fixed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: Chao Yu <yuchao0@huawei.com> [f2fs]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Switch the block device lookup interfaces to directly work with a dev_t
so that struct block_device references are only acquired by the
blkdev_get variants (and the blk-cgroup special case). This means that
we now don't need an extra reference in the inode and can generally
simplify handling of struct block_device to keep the lookups contained
in the core block layer code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Coly Li <colyli@suse.de> [bcache]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Get rid of the long-lasting struct block_device reference in
struct mapped_device. The only remaining user is the freeze code,
where we can trivially look up the block device at freeze time
and release the reference at thaw time.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We don't really need the struct block_device to initialize a bio. So
switch from using bio_set_dev to manually setting up bi_disk (bi_partno
will always be zero and has been cleared by bio_init already).
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Store the frozen superblock in struct block_device to avoid the awkward
interface that can return a sb only used a cookie, an ERR_PTR or NULL.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Chao Yu <yuchao0@huawei.com> [f2fs]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Building on arch/s390/ results in this build error:
cc1: some warnings being treated as errors
../drivers/md/dm-writecache.c: In function 'persistent_memory_claim':
../drivers/md/dm-writecache.c:323:1: error: no return statement in function returning non-void [-Werror=return-type]
Fix this by replacing the BUG() with an -EOPNOTSUPP return.
Fixes: 48debafe4f ("dm: add writecache target")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The BUG_ON(in_interrupt()) in dm_table_event() is a historic leftover from
a rework of the dm table code which changed the calling context.
Issuing a BUG for a wrong calling context is frowned upon and
in_interrupt() is deprecated and only covering parts of the wrong
contexts. The sanity check for the context is covered by
CONFIG_DEBUG_ATOMIC_SLEEP and other debug facilities already.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The dm_get_live_table() function makes RCU read lock so
dm_put_live_table() must be called even if dm_table map is not found.
Fixes: e76239a374 ("block: add a report_zones method")
Cc: stable@vger.kernel.org
Signed-off-by: Sergei Shtepa <sergei.shtepa@veeam.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
md-cluster uses MD_CLUSTER_SEND_LOCK to make node can exclusively send msg.
During sending msg, node can concurrently receive msg from another node.
When node does resync job, grab token_lockres:EX may trigger a deadlock:
```
nodeA nodeB
-------------------- --------------------
a.
send METADATA_UPDATED
held token_lockres:EX
b.
md_do_sync
resync_info_update
send RESYNCING
+ set MD_CLUSTER_SEND_LOCK
+ wait for holding token_lockres:EX
c.
mdadm /dev/md0 --remove /dev/sdg
+ held reconfig_mutex
+ send REMOVE
+ wait_event(MD_CLUSTER_SEND_LOCK)
d.
recv_daemon //METADATA_UPDATED from A
process_metadata_update
+ (mddev_trylock(mddev) ||
MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD)
//this time, both return false forever
```
Explaination:
a. A send METADATA_UPDATED
This will block another node to send msg
b. B does sync jobs, which will send RESYNCING at intervals.
This will be block for holding token_lockres:EX lock.
c. B do "mdadm --remove", which will send REMOVE.
This will be blocked by step <b>: MD_CLUSTER_SEND_LOCK is 1.
d. B recv METADATA_UPDATED msg, which send from A in step <a>.
This will be blocked by step <c>: holding mddev lock, it makes
wait_event can't hold mddev lock. (btw,
MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD keep ZERO in this scenario.)
There is a similar deadlock in commit 0ba959774e
("md-cluster: use sync way to handle METADATA_UPDATED msg")
In that commit, step c is "update sb". This patch step c is
"mdadm --remove".
For fixing this issue, we can refer the solution of function:
metadata_update_start. Which does the same grab lock_token action.
lock_comm can use the same steps to avoid deadlock. By moving
MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD from lock_token to lock_comm.
It enlarge a little bit window of MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD,
but it is safe & can break deadlock.
Repro steps (I only triggered 3 times with hundreds tests):
two nodes share 3 iSCSI luns: sdg/sdh/sdi. Each lun size is 1GB.
```
ssh root@node2 "mdadm -S --scan"
mdadm -S --scan
for i in {g,h,i};do dd if=/dev/zero of=/dev/sd$i oflag=direct bs=1M \
count=20; done
mdadm -C /dev/md0 -b clustered -e 1.2 -n 2 -l mirror /dev/sdg /dev/sdh \
--bitmap-chunk=1M
ssh root@node2 "mdadm -A /dev/md0 /dev/sdg /dev/sdh"
sleep 5
mkfs.xfs /dev/md0
mdadm --manage --add /dev/md0 /dev/sdi
mdadm --wait /dev/md0
mdadm --grow --raid-devices=3 /dev/md0
mdadm /dev/md0 --fail /dev/sdg
mdadm /dev/md0 --remove /dev/sdg
mdadm --grow --raid-devices=2 /dev/md0
```
test script will hung when executing "mdadm --remove".
```
# dump stacks by "echo t > /proc/sysrq-trigger"
md0_cluster_rec D 0 5329 2 0x80004000
Call Trace:
__schedule+0x1f6/0x560
? _cond_resched+0x2d/0x40
? schedule+0x4a/0xb0
? process_metadata_update.isra.0+0xdb/0x140 [md_cluster]
? wait_woken+0x80/0x80
? process_recvd_msg+0x113/0x1d0 [md_cluster]
? recv_daemon+0x9e/0x120 [md_cluster]
? md_thread+0x94/0x160 [md_mod]
? wait_woken+0x80/0x80
? md_congested+0x30/0x30 [md_mod]
? kthread+0x115/0x140
? __kthread_bind_mask+0x60/0x60
? ret_from_fork+0x1f/0x40
mdadm D 0 5423 1 0x00004004
Call Trace:
__schedule+0x1f6/0x560
? __schedule+0x1fe/0x560
? schedule+0x4a/0xb0
? lock_comm.isra.0+0x7b/0xb0 [md_cluster]
? wait_woken+0x80/0x80
? remove_disk+0x4f/0x90 [md_cluster]
? hot_remove_disk+0xb1/0x1b0 [md_mod]
? md_ioctl+0x50c/0xba0 [md_mod]
? wait_woken+0x80/0x80
? blkdev_ioctl+0xa2/0x2a0
? block_ioctl+0x39/0x40
? ksys_ioctl+0x82/0xc0
? __x64_sys_ioctl+0x16/0x20
? do_syscall_64+0x5f/0x150
? entry_SYSCALL_64_after_hwframe+0x44/0xa9
md0_resync D 0 5425 2 0x80004000
Call Trace:
__schedule+0x1f6/0x560
? schedule+0x4a/0xb0
? dlm_lock_sync+0xa1/0xd0 [md_cluster]
? wait_woken+0x80/0x80
? lock_token+0x2d/0x90 [md_cluster]
? resync_info_update+0x95/0x100 [md_cluster]
? raid1_sync_request+0x7d3/0xa40 [raid1]
? md_do_sync.cold+0x737/0xc8f [md_mod]
? md_thread+0x94/0x160 [md_mod]
? md_congested+0x30/0x30 [md_mod]
? kthread+0x115/0x140
? __kthread_bind_mask+0x60/0x60
? ret_from_fork+0x1f/0x40
```
At last, thanks for Xiao's solution.
Cc: stable@vger.kernel.org
Signed-off-by: Zhao Heming <heming.zhao@suse.com>
Suggested-by: Xiao Ni <xni@redhat.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Reshape request should be blocked with ongoing resync job. In cluster
env, a node can start resync job even if the resync cmd isn't executed
on it, e.g., user executes "mdadm --grow" on node A, sometimes node B
will start resync job. However, current update_raid_disks() only check
local recovery status, which is incomplete. As a result, we see user will
execute "mdadm --grow" successfully on local, while the remote node deny
to do reshape job when it doing resync job. The inconsistent handling
cause array enter unexpected status. If user doesn't observe this issue
and continue executing mdadm cmd, the array doesn't work at last.
Fix this issue by blocking reshape request. When node executes "--grow"
and detects ongoing resync, it should stop and report error to user.
The following script reproduces the issue with ~100% probability.
(two nodes share 3 iSCSI luns: sdg/sdh/sdi. Each lun size is 1GB)
```
# on node1, node2 is the remote node.
ssh root@node2 "mdadm -S --scan"
mdadm -S --scan
for i in {g,h,i};do dd if=/dev/zero of=/dev/sd$i oflag=direct bs=1M \
count=20; done
mdadm -C /dev/md0 -b clustered -e 1.2 -n 2 -l mirror /dev/sdg /dev/sdh
ssh root@node2 "mdadm -A /dev/md0 /dev/sdg /dev/sdh"
sleep 5
mdadm --manage --add /dev/md0 /dev/sdi
mdadm --wait /dev/md0
mdadm --grow --raid-devices=3 /dev/md0
mdadm /dev/md0 --fail /dev/sdg
mdadm /dev/md0 --remove /dev/sdg
mdadm --grow --raid-devices=2 /dev/md0
```
Cc: stable@vger.kernel.org
Signed-off-by: Zhao Heming <heming.zhao@suse.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Request coalescing logic uses 'prev_flush_start' as base to
compare the current request start time. 'prev_flush_start' is
updated in other context.
This patch changes this by using ktime comparison base to
'req_start' for better readability of code.
Signed-off-by: Pankaj Gupta <pankaj.gupta@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Request coalescing logic is dependent on flush time update in other
context. This patch adds comments to understand the code flow better.
Signed-off-by: Pankaj Gupta <pankaj.gupta@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
In __make_request() a new r10bio is allocated and passed to
raid10_read_request(). The read_slot member of the bio is not
initialized, and the raid10_read_request() uses it to index an
array. This leads to occasional panics.
Fix by initializing the field to invalid value and checking for
valid value in raid10_read_request().
Cc: stable@vger.kernel.org
Signed-off-by: Kevin Vigor <kvigor@gmail.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Advance the maximum number of arguments to 16.
This fixes issue where certain operations, combined with table
configured args, exceed 10 arguments.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: 48debafe4f ("dm: add writecache target")
Cc: stable@vger.kernel.org # v4.18+
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
When reporting the "max_age" value the number of arguments must
advance by two.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: 3923d4854e ("dm writecache: implement gradual cleanup")
Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Don't use crypto drivers that have the flag CRYPTO_ALG_ALLOCATES_MEMORY
set. These drivers allocate memory and thus they are not suitable for
block I/O processing.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
None of the ->resize methods updates the disk size, so calling
revalidate_disk_size here won't do anything.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use set_capacity_and_notify to set the size of both the disk and block
device. This also gets the uevent notifications for the resize for free.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use set_capacity_and_notify to set the size of both the disk and block
device. This also gets the uevent notifications for the resize for free.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use set_capacity_and_notify to set the size of both the disk and block
device. This also gets the uevent notifications for the resize for free.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the simpler mechanism attached to major_name to allocate a md device
when a currently unregistered minor is accessed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Implement the ->set_read_only method instead of parsing the actual
ioctl command.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull device mapper updates from Mike Snitzer:
- Improve DM core's bio splitting to use blk_max_size_offset(). Also
fix bio splitting for bios that were deferred to the worker thread
due to a DM device being suspended.
- Remove DM core's special handling of NVMe devices now that block core
has internalized efficiencies drivers previously needed to be
concerned about (via now removed direct_make_request).
- Fix request-based DM to not bounce through indirect dm_submit_bio;
instead have block core make direct call to blk_mq_submit_bio().
- Various DM core cleanups to simplify and improve code.
- Update DM cryot to not use drivers that set
CRYPTO_ALG_ALLOCATES_MEMORY.
- Fix DM raid's raid1 and raid10 discard limits for the purposes of
linux-stable. But then remove DM raid's discard limits settings now
that MD raid can efficiently handle large discards.
- A couple small cleanups across various targets.
* tag 'for-5.10/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: fix request-based DM to not bounce through indirect dm_submit_bio
dm: remove special-casing of bio-based immutable singleton target on NVMe
dm: export dm_copy_name_and_uuid
dm: fix comment in __dm_suspend()
dm: fold dm_process_bio() into dm_submit_bio()
dm: fix missing imposition of queue_limits from dm_wq_work() thread
dm snap persistent: simplify area_io()
dm thin metadata: Remove unused local variable when create thin and snap
dm raid: remove unnecessary discard limits for raid10
dm raid: fix discard limits for raid1 and raid10
dm crypt: don't use drivers that have CRYPTO_ALG_ALLOCATES_MEMORY
dm: use dm_table_get_device_name() where appropriate in targets
dm table: make 'struct dm_table' definition accessible to all of DM core
dm: eliminate need for start_io_acct() forward declaration
dm: simplify __process_abnormal_io()
dm: push use of on-stack flush_bio down to __send_empty_flush()
dm: optimize max_io_len() by inlining max_io_len_target_boundary()
dm: push md->immutable_target optimization down to __process_bio()
dm: change max_io_len() to use blk_max_size_offset()
dm table: stack 'chunk_sectors' limit to account for target-specific splitting
Pull block driver updates from Jens Axboe:
"Here are the driver updates for 5.10.
A few SCSI updates in here too, in coordination with Martin as they
depend on core block changes for the shared tag bitmap.
This contains:
- NVMe pull requests via Christoph:
- fix keep alive timer modification (Amit Engel)
- order the PCI ID list more sensibly (Andy Shevchenko)
- cleanup the open by controller helper (Chaitanya Kulkarni)
- use an xarray for the CSE log lookup (Chaitanya Kulkarni)
- support ZNS in nvmet passthrough mode (Chaitanya Kulkarni)
- fix nvme_ns_report_zones (Christoph Hellwig)
- add a sanity check to nvmet-fc (James Smart)
- fix interrupt allocation when too many polled queues are
specified (Jeffle Xu)
- small nvmet-tcp optimization (Mark Wunderlich)
- fix a controller refcount leak on init failure (Chaitanya
Kulkarni)
- misc cleanups (Chaitanya Kulkarni)
- major refactoring of the scanning code (Christoph Hellwig)
- MD updates via Song:
- Bug fixes in bitmap code, from Zhao Heming
- Fix a work queue check, from Guoqing Jiang
- Fix raid5 oops with reshape, from Song Liu
- Clean up unused code, from Jason Yan
- Discard improvements, from Xiao Ni
- raid5/6 page offset support, from Yufen Yu
- Shared tag bitmap for SCSI/hisi_sas/null_blk (John, Kashyap,
Hannes)
- null_blk open/active zone limit support (Niklas)
- Set of bcache updates (Coly, Dongsheng, Qinglang)"
* tag 'drivers-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (78 commits)
md/raid5: fix oops during stripe resizing
md/bitmap: fix memory leak of temporary bitmap
md: fix the checking of wrong work queue
md/bitmap: md_bitmap_get_counter returns wrong blocks
md/bitmap: md_bitmap_read_sb uses wrong bitmap blocks
md/raid0: remove unused function is_io_in_chunk_boundary()
nvme-core: remove extra condition for vwc
nvme-core: remove extra variable
nvme: remove nvme_identify_ns_list
nvme: refactor nvme_validate_ns
nvme: move nvme_validate_ns
nvme: query namespace identifiers before adding the namespace
nvme: revalidate zone bitmaps in nvme_update_ns_info
nvme: remove nvme_update_formats
nvme: update the known admin effects
nvme: set the queue limits in nvme_update_ns_info
nvme: remove the 0 lba_shift check in nvme_update_ns_info
nvme: clean up the check for too large logic block sizes
nvme: freeze the queue over ->lba_shift updates
nvme: factor out a nvme_configure_metadata helper
...
Pull block updates from Jens Axboe:
- Series of merge handling cleanups (Baolin, Christoph)
- Series of blk-throttle fixes and cleanups (Baolin)
- Series cleaning up BDI, seperating the block device from the
backing_dev_info (Christoph)
- Removal of bdget() as a generic API (Christoph)
- Removal of blkdev_get() as a generic API (Christoph)
- Cleanup of is-partition checks (Christoph)
- Series reworking disk revalidation (Christoph)
- Series cleaning up bio flags (Christoph)
- bio crypt fixes (Eric)
- IO stats inflight tweak (Gabriel)
- blk-mq tags fixes (Hannes)
- Buffer invalidation fixes (Jan)
- Allow soft limits for zone append (Johannes)
- Shared tag set improvements (John, Kashyap)
- Allow IOPRIO_CLASS_RT for CAP_SYS_NICE (Khazhismel)
- DM no-wait support (Mike, Konstantin)
- Request allocation improvements (Ming)
- Allow md/dm/bcache to use IO stat helpers (Song)
- Series improving blk-iocost (Tejun)
- Various cleanups (Geert, Damien, Danny, Julia, Tetsuo, Tian, Wang,
Xianting, Yang, Yufen, yangerkun)
* tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (191 commits)
block: fix uapi blkzoned.h comments
blk-mq: move cancel of hctx->run_work to the front of blk_exit_queue
blk-mq: get rid of the dead flush handle code path
block: get rid of unnecessary local variable
block: fix comment and add lockdep assert
blk-mq: use helper function to test hw stopped
block: use helper function to test queue register
block: remove redundant mq check
block: invoke blk_mq_exit_sched no matter whether have .exit_sched
percpu_ref: don't refer to ref->data if it isn't allocated
block: ratelimit handle_bad_sector() message
blk-throttle: Re-use the throtl_set_slice_end()
blk-throttle: Open code __throtl_de/enqueue_tg()
blk-throttle: Move service tree validation out of the throtl_rb_first()
blk-throttle: Move the list operation after list validation
blk-throttle: Fix IO hang for a corner case
blk-throttle: Avoid tracking latency if low limit is invalid
blk-throttle: Avoid getting the current time if tg->last_finish_time is 0
blk-throttle: Remove a meaningless parameter for throtl_downgrade_state()
block: Remove redundant 'return' statement
...
Pull RAS updates from Borislav Petkov:
- Extend the recovery from MCE in kernel space also to processes which
encounter an MCE in kernel space but while copying from user memory
by sending them a SIGBUS on return to user space and umapping the
faulty memory, by Tony Luck and Youquan Song.
- memcpy_mcsafe() rework by splitting the functionality into
copy_mc_to_user() and copy_mc_to_kernel(). This, as a result, enables
support for new hardware which can recover from a machine check
encountered during a fast string copy and makes that the default and
lets the older hardware which does not support that advance recovery,
opt in to use the old, fragile, slow variant, by Dan Williams.
- New AMD hw enablement, by Yazen Ghannam and Akshay Gupta.
- Do not use MSR-tracing accessors in #MC context and flag any fault
while accessing MCA architectural MSRs as an architectural violation
with the hope that such hw/fw misdesigns are caught early during the
hw eval phase and they don't make it into production.
- Misc fixes, improvements and cleanups, as always.
* tag 'ras_updates_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Allow for copy_mc_fragile symbol checksum to be generated
x86/mce: Decode a kernel instruction to determine if it is copying from user
x86/mce: Recover from poison found while copying from user space
x86/mce: Avoid tail copy when machine check terminated a copy from user
x86/mce: Add _ASM_EXTABLE_CPY for copy user access
x86/mce: Provide method to find out the type of an exception handler
x86/mce: Pass pointer to saved pt_regs to severity calculation routines
x86/copy_mc: Introduce copy_mc_enhanced_fast_string()
x86, powerpc: Rename memcpy_mcsafe() to copy_mc_to_{user, kernel}()
x86/mce: Drop AMD-specific "DEFERRED" case from Intel severity rule list
x86/mce: Add Skylake quirk for patrol scrub reported errors
RAS/CEC: Convert to DEFINE_SHOW_ATTRIBUTE()
x86/mce: Annotate mce_rd/wrmsrl() with noinstr
x86/mce/dev-mcelog: Do not update kflags on AMD systems
x86/mce: Stop mce_reign() from re-computing severity for every CPU
x86/mce: Make mce_rdmsrl() panic on an inaccessible MSR
x86/mce: Increase maximum number of banks to 64
x86/mce: Delay clearing IA32_MCG_STATUS to the end of do_machine_check()
x86/MCE/AMD, EDAC/mce_amd: Remove struct smca_hwid.xec_bitmap
RAS/CEC: Fix cec_init() prototype
md_bitmap_get_counter() has code:
```
if (bitmap->bp[page].hijacked ||
bitmap->bp[page].map == NULL)
csize = ((sector_t)1) << (bitmap->chunkshift +
PAGE_COUNTER_SHIFT - 1);
```
The minus 1 is wrong, this branch should report 2048 bits of space.
With "-1" action, this only report 1024 bit of space.
This bug code returns wrong blocks, but it doesn't inflence bitmap logic:
1. Most callers focus this function return value (the counter of offset),
not the parameter blocks.
2. The bug is only triggered when hijacked is true or map is NULL.
the hijacked true condition is very rare.
the "map == null" only true when array is creating or resizing.
3. Even the caller gets wrong blocks, current code makes caller just to
call md_bitmap_get_counter() one more time.
Signed-off-by: Zhao Heming <heming.zhao@suse.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
