For DG1 we have a little of mix up wrt to DDI/port names and indexes.
Bspec refers to the ports as DDIA, DDIB, DDI USBC1 and DDI USBC2
(besides the DDIA, DDIB, DDIC, DDID), but the previous naming is the
most unambiguous one. This means that for any register on Display Engine
we should use the index of A, B, D and E. However in some places this is
not true:
- VBT: uses C and D and have to be mapped to D/E
- IO/Combo: uses C and D, but we already differentiate those when
we created the phy vs port distinction.
This additional mapping for VBT and phy are already covered in previous
patches, so now we can initialize all the DDIs as A, B, D and E.
v2: Squash previous patch enabling just ports A and B since most of the
pumbling code is already merged now
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117084836.2318234-1-lucas.demarchi@intel.com
- Fix tgl power gating issue (Rodrigo)
- Memory leak fixes (Tvrtko, Chris)
- Selftest fixes (Zhang)
- Display bpc fix (Ville)
- Fix TGL MOCS for PTE tracking (Chris)
GVT Fixes: It temporarily disables VFIO edid
feature on BXT/APL until its virtual display is really fixed to make
it work properly. And fixes for DPCD 1.2 and error return in taking
module reference.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201119203417.GA1795798@intel.com
Commit 7053e0eab4 ("drm/vram-helper: stop using TTM placement flags")
cleared the BO placement flags if top-down placement had been selected.
Hence, BOs that were supposed to go into VRAM are now placed in a default
location in system memory.
Trying to scanout the incorrectly pinned BO results in displayed garbage
and an error message.
[ 146.108127] ------------[ cut here ]------------
[ 146.1V08180] WARNING: CPU: 0 PID: 152 at drivers/gpu/drm/drm_gem_vram_helper.c:284 drm_gem_vram_offset+0x59/0x60 [drm_vram_helper]
...
[ 146.108591] ast_cursor_page_flip+0x3e/0x150 [ast]
[ 146.108622] ast_cursor_plane_helper_atomic_update+0x8a/0xc0 [ast]
[ 146.108654] drm_atomic_helper_commit_planes+0x197/0x4c0
[ 146.108699] drm_atomic_helper_commit_tail_rpm+0x59/0xa0
[ 146.108718] commit_tail+0x103/0x1c0
...
[ 146.109302] ---[ end trace d901a1ba1d949036 ]---
Fix the bug by keeping the placement flags. The top-down placement flag
is stored in a separate variable.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Fixes: 7053e0eab4 ("drm/vram-helper: stop using TTM placement flags")
Reported-by: Pu Wen <puwen@hygon.cn> [for 5.10-rc1]
Tested-by: Pu Wen <puwen@hygon.cn>
Cc: Christian König <christian.koenig@amd.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200921142536.4392-1-tzimmermann@suse.de
(cherry picked from commit b8f8dbf649)
[pulled into fixes from drm-next]
Signed-off-by: Dave Airlie <airlied@redhat.com>
After having written the entire OA buffer with reports, the HW will
write again at the beginning of the OA buffer. It'll indicate it by
setting the WRAP bits in the OASTATUS register.
When a wrap happens and that at the end of the read vfunc we write the
OASTATUS register back to clear the REPORT_LOST bit, we sometimes see
that the OATAILPTR register is reset to a previous position on Gen8/9
(apparently not the case on Gen11+). This leads the next call to the
read vfunc to process reports we've already read. Because we've marked
those as read by clearing the reason & timestamp dwords, they're
discarded and a "Skipping spurious, invalid OA report" message is
emitted.
The workaround to avoid this OATAILPTR value reset seems to be to set
the wrap bits when writing back OASTATUS.
This change has no impact on userspace, it only avoids a bunch of
DRM_NOTE("Skipping spurious, invalid OA report\n") messages.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 19f81df285 ("drm/i915/perf: Add OA unit support for Gen 8+")
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117130124.829979-1-lionel.g.landwerlin@intel.com
The HDMI controller cannot go above a certain pixel rate limit depending on
the generations, but that limit is only enforced in mode_valid at the
moment, which means that we won't advertise modes that exceed that limit,
but the userspace is still free to try to setup a mode that would.
Implement atomic_check to make sure we check it in that scenario too.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201029122522.1917579-1-maxime@cerno.tech
Add the new vma_set_file() function to allow changing
vma->vm_file with the necessary refcount dance.
v2: add more users of this.
v3: add missing EXPORT_SYMBOL, rebase on mmap cleanup,
add comments why we drop the reference on two occasions.
v4: make it clear that changing an anonymous vma is illegal.
v5: move vma_set_file to mm/util.c
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v2)
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://patchwork.freedesktop.org/patch/399360/
Fix for drm/sun4i shared with arm-soc
This patch is a preliminary fix that will conflict with subsequent work merged
through arm-soc.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
# gpg: Signature made Wed 18 Nov 2020 09:51:53 AM CET
# gpg: using EDDSA key 5C1337A45ECA9AEB89060E9EE3EF0D6F671851C5
# gpg: Good signature from "Maxime Ripard <maxime.ripard@anandra.org>" [unknown]
# gpg: aka "Maxime Ripard <mripard@kernel.org>" [unknown]
# gpg: aka "Maxime Ripard (Work Address) <maxime.ripard@bootlin.com>" [unknown]
# gpg: aka "Maxime Ripard (Work Address) <maxime@bootlin.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: BE56 75C3 7E81 8C8B 5764 241C 254B CFC5 6BF6 CE8D
# Subkey fingerprint: 5C13 37A4 5ECA 9AEB 8906 0E9E E3EF 0D6F 6718 51C5
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201118090455.sznrgpduuytlc22k@gilmour.lan
EDID can declare the maximum supported bpc up to 16,
and apparently there are displays that do so. Currently
we assume 12 bpc is tha max. Fix the assumption and
toss in a MISSING_CASE() for any other value we don't
expect to see.
This fixes modesets with a display with EDID max bpc > 12.
Previously any modeset would just silently fail on platforms
that didn't otherwise limit this via the max_bpc property.
In particular we don't add the max_bpc property to HDMI
ports on gmch platforms, and thus we would see the raw
max_bpc coming from the EDID.
I suppose we could already adjust this to also allow 16bpc,
but seeing as no current platform supports that there is
little point.
Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2632
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201110210447.27454-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit 2ca5a7b85b)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We recently improved our display atomic commit and tail sequence to
avoid some issues related to concurrency. One of the major changes
consisted of moving the interrupt disable and the stream release from
our atomic commit to our atomic tail (commit 6d90a208cf
("drm/amd/display: Move disable interrupt into commit tail")) .
However, the new code introduced inside our commit tail function was
inserted right after the function
drm_atomic_helper_update_legacy_modeset_state(), which has routines for
updating internal data structs related to timestamps. As a result, in
certain conditions, the display module can reach a situation where we
update our constants and, after that, clean it. This situation generates
the following warning:
amdgpu 0000:03:00.0: drm_WARN_ON_ONCE(drm_drv_uses_atomic_modeset(dev))
WARNING: CPU: 6 PID: 1269 at drivers/gpu/drm/drm_vblank.c:722
drm_crtc_vblank_helper_get_vblank_timestamp_internal+0x32b/0x340 [drm]
...
RIP:
0010:drm_crtc_vblank_helper_get_vblank_timestamp_internal+0x32b/0x340
[drm]
...
Call Trace:
? dc_stream_get_vblank_counter+0x57/0x60 [amdgpu]
drm_crtc_vblank_helper_get_vblank_timestamp+0x1c/0x20 [drm]
drm_get_last_vbltimestamp+0xad/0xc0 [drm]
drm_reset_vblank_timestamp+0x63/0xd0 [drm]
drm_crtc_vblank_on+0x85/0x150 [drm]
amdgpu_dm_atomic_commit_tail+0xaf1/0x2330 [amdgpu]
commit_tail+0x99/0x130 [drm_kms_helper]
drm_atomic_helper_commit+0x123/0x150 [drm_kms_helper]
amdgpu_dm_atomic_commit+0x11/0x20 [amdgpu]
drm_atomic_commit+0x4a/0x50 [drm]
drm_atomic_helper_set_config+0x7c/0xc0 [drm_kms_helper]
drm_mode_setcrtc+0x20b/0x7e0 [drm]
? tomoyo_path_number_perm+0x6f/0x200
? drm_mode_getcrtc+0x190/0x190 [drm]
drm_ioctl_kernel+0xae/0xf0 [drm]
drm_ioctl+0x245/0x400 [drm]
? drm_mode_getcrtc+0x190/0x190 [drm]
amdgpu_drm_ioctl+0x4e/0x80 [amdgpu]
__x64_sys_ioctl+0x91/0xc0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xa9
...
For fixing this issue we rely upon a refactor introduced on
drm_atomic_helper_update_legacy_modeset_state ("Remove the timestamping
constant update from drm_atomic_helper_update_legacy_modeset_state()")
which decouples constant values update from
drm_atomic_helper_update_legacy_modeset_state to a new helper.
Basically, this commit uses this new helper and place it right after our
release module to avoid a situation where our CRTC struct gets wrong
values.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1373
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1349
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Skip iterating over bigjoiner slaves, only the master has the state we
care about.
Add the width of the bigjoiner slave to the reconstructed fb.
Hide the bigjoiner slave to userspace, and double the mode on bigjoiner
master.
And last, disable bigjoiner slave from primary if reconstruction fails.
v3:
* Fix the ddi_get_config slave error (Ankit Nautiyal)
v2:
* Unsupported bigjoiner config for initial fb (Ville)
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
[vsyrjala:
* Don't do any hw->uapi state copy for bigjoiner slave
* We still have hw.mode so no need to pass it in
* Appease checkpatch]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-7-manasi.d.navare@intel.com
Enabling is done in a special sequence and so should plane updates
be. Ideally the end user never notices the second pipe is used.
This way ideally everything will be tear free, and updates are
really atomic as userspace expects it.
This uses generic modeset_enables() calls like trans port sync
but still has special handling for disable since for slave we
should not disable things like encoder, plls that are not enabled
for slave.
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
[vsyrjala: Appease checkpatch]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-6-manasi.d.navare@intel.com
When the clock is higher than the dotclock, try with 2 pipes enabled.
If we can enable 2, then we will go into big joiner mode, and steal
the adjacent crtc.
This only links the crtc's in software, no hardware or plane
programming is done yet. Blobs are also copied from the master's
crtc_state, so it doesn't depend at commit time on the other
crtc_state.
v6:
* Enable dSC for any mode->hdisplay > 5120
v5:
* Remove intel_dp_max_dotclock (Manasi)
v4:
* Fixes in intel_crtc_compute_config (Ville)
v3:
* Manual Rebase (Manasi)
Changes since v1:
- Rename pipe timings to transcoder timings, as they are now different.
Changes since v2:
- Rework bigjoiner checks; always disable slave when recalculating
master. No need to have a separate bigjoiner pass any more.
- Use pipe_mode instead of transcoder_mode, to clean up the code.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
[vsyrjala:
* hskew isn't a thing
* Do the dsc compute if bigjoiner is enabled, not the other way around]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-4-manasi.d.navare@intel.com
Small changes to intel_dp_mode_valid(), allow listing modes that
can only be supported in the bigjoiner configuration, which is
not supported yet.
v13:
* Allow bigjoiner if hdisplay >5120
v12:
* slice_count logic simplify (Ville)
* Fix unnecessary changes in downstream_mode_valid (Ville)
v11:
* Make intel_dp_can_bigjoiner non static
so it can be used in intel_display (Manasi)
v10:
* Simplify logic (Ville)
* Allow bigjoiner on edp (Ville)
v9:
* Restric Bigjoiner on PORT A (Ville)
v8:
* use source dotclock for max dotclock (Manasi)
v7:
* Add can_bigjoiner() helper (Ville)
* Pass bigjoiner to plane_size validation (Ville)
v6:
* Rebase after dp_downstream mode valid changes (Manasi)
v5:
* Increase max plane width to support 8K with bigjoiner (Maarten)
v4:
* Rebase (Manasi)
Changes since v1:
- Disallow bigjoiner on eDP.
Changes since v2:
- Rename intel_dp_downstream_max_dotclock to intel_dp_max_dotclock,
and split off the downstream and source checking to its own function.
(Ville)
v3:
* Rebase (Manasi)
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[vsyrjala:
* Keep bigjoiner disabled until everything is ready
* Appease checkpatch]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-3-manasi.d.navare@intel.com
[Why]
These comments are helpful in understanding which case each if
statement handles.
[How]
Add comments for state transitions (9 possible cases)
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Zhan Liu <zhan.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We call add display multiple times because DESIRED->ENABLED cannot
happen instantaneously. We can't compare the new_state/old_state to
avoid this because on unplug we set the state to DESIRED and on hotplug
the state will still be DESIRED.
[How]
Add a flag to dm_connector_state to keep track of when to enable or
disable HDCP
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Zhan Liu <zhan.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
