The UVD firmware is copied to cpu addr in uvd_resume, so it
should be used after that. This is to fix a bug introduced by
patch drm/amdgpu: fix SI UVD firmware validate resume fail.
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This has been confirmed that unload message is not needed from SIENNA_CICHLID in reset.
Otherwise it will cause the fw wrong state after reset and no response for any messages.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The SI UVD firmware validate key is stored at the end of firmware,
which is changed during resume while playing video. So get the key
at sw_init and store it for fw validate using.
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Get rid of the __call_single_node union and clean up the API a little
to avoid external code relying on the structure layout as much.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Flushing the fbdev's shadow buffer requires vmap'ing the BO memory, which
in turn requires pinning the BO. While being pinned, the BO cannot be moved
into VRAM for scanout. Consequently, a concurrent modeset operation that
involves the fbdev framebuffer would likely fail.
Resolve this problem be acquiring the modeset lock of the planes that use
the fbdev framebuffer. On non-atomic drivers, also acquire the mode-config
lock. This serializes the flushing of the framebuffer with concurrent
modeset operations.
v2:
* only acquire struct drm_fb_helper.lock in damage blitter (Daniel,
Christian)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201120102545.4047-11-tzimmermann@suse.de
DRM client's vmap/vunmap functions don't allow for multiple vmap
operations. Calling drm_client_buffer_vmap() twice returns the same
mapping, then calling drm_client_buffer_vunmap() twice already unmaps
on the first call. This leads to unbalanced vmap refcounts. Fix this
by calling drm_gem_vmap() unconditionally in drm_client_buffer_vmap().
All drivers that support DRM clients have to implement correct ref-
counting for their vmap operations, or not vunmap at all. This is the
case for drivers that use CMA, SHMEM and VRAM helpers, and QXL. Other
drivers are not affected.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201120102545.4047-4-tzimmermann@suse.de
SHMEM-buffer backing storage is allocated from system memory; which is
typically cachable. The default mode for SHMEM objects is writecombine
though.
Unify SHMEM semantics by defaulting to cached mappings. The exception
is pages imported via dma-buf. DMA memory is usually not cached.
DRM drivers that require write-combined mappings set the map_wc flag
in struct drm_gem_shmem_object to true. This currently affects lima,
panfrost and v3d.
The drivers mgag200, udl, virtio and vkms continue to use default
shmem mappings.
The drivers cirrus and gm12u320 change caching flags. Both used
writecombine and now switch over to shmem defaults. Both drivers use
SHMEM objects as shadow buffers for internal video memory, so cached
mappings will not affect them negatively.
v3:
* set value of shmem pointer before dereferencing it in
__drm_gem_shmem_create() (Dan, kernel test robot)
v2:
* recreate patch on top of latest SHMEM helpers
* update lima, panfrost, v3d to select writecombine (Daniel, Rob)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117133156.26822-2-tzimmermann@suse.de
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c: In function ‘dpu_encoder_virt_mode_set’:
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:981:31: warning: variable ‘num_dspp’ set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:976:30: warning: variable ‘topology’ set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c: In function ‘_dpu_encoder_virt_enable_helper’:
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:1099:26: warning: variable ‘priv’ set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c: In function ‘dpu_encoder_virt_disable’:
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:1210:18: warning: variable ‘dpu_kms’ set but not used [-Wunused-but-set-variable]
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
This implements support for DPI output using the port node
in the device tree to connect a DPI LCD display to the
MCDE. The block also supports TV-out but we leave that
for another day when we have a hardware using it.
We implement parsing and handling of the "port" node,
and follow that to the DPI endpoint.
The clock divider used by the MCDE to divide down the
"lcdclk" (this has been designed for TV-like frequencies)
is represented by an ordinary clock provider internally
in the MCDE. This idea was inspired by the PL111 solution
by Eric Anholt: the divider also works very similar to
the Pl111 clock divider.
We take care to clear up some errors regarding the number
of available formatters and their type. We have 6 DSI
formatters and 2 DPI formatters.
Tested on the Samsung GT-I9070 Janice mobile phone.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: phone-devel@vger.kernel.org
Cc: upstreaming@lists.sr.ht
Link: https://patchwork.freedesktop.org/patch/msgid/20201112142925.2571179-2-linus.walleij@linaro.org
I was confused when the graphics came out with blue
penguins on the DPI panel.
It turns out that the so-called "packed RGB666" mode
on the DSI formatter is incorrect: this mode is the
actual RGB888 mode, and the mode called RGB888 is
BGR888.
The claims that the MCDE had inverse RGB/BGR buffer
formats was wrong, so correct this and the buggy
register and everything is much more consistent, and
graphics look good on all targets, both DPI and
DSI.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Cc: phone-devel@vger.kernel.org
Cc: Stephan Gerhold <stephan@gerhold.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117175413.869871-1-linus.walleij@linaro.org
The current HVS muxing code will consider the CRTCs in a given state to
setup their muxing in the HVS, and disable the other CRTCs muxes.
However, it's valid to only update a single CRTC with a state, and in this
situation we would mux out a CRTC that was enabled but left untouched by
the new state.
Fix this by setting a flag on the CRTC state when the muxing has been
changed, and only change the muxing configuration when that flag is there.
Fixes: 87ebcd42fb ("drm/vc4: crtc: Assign output to channel automatically")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Reviewed-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201120144245.398711-3-maxime@cerno.tech
If a CRTC is enabled but not active, and that we're then doing a page
flip on another CRTC, drm_atomic_get_crtc_state will bring the first
CRTC state into the global state, and will make us wait for its vblank
as well, even though that might never occur.
Instead of creating the list of the free channels each time atomic_check
is called, and calling drm_atomic_get_crtc_state to retrieve the
allocated channels, let's create a private state object in the main
atomic state, and use it to store the available channels.
Since vc4 has a semaphore (with a value of 1, so a lock) in its commit
implementation to serialize all the commits, even the nonblocking ones, we
are free from the use-after-free race if two subsequent commits are not ran
in their submission order.
Fixes: 87ebcd42fb ("drm/vc4: crtc: Assign output to channel automatically")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Reviewed-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201120144245.398711-2-maxime@cerno.tech
The Exynos DRM uses Common Clock Framework thus it cannot be built on
platforms without it (e.g. compile test on MIPS with RALINK and
SOC_RT305X):
/usr/bin/mips-linux-gnu-ld: drivers/gpu/drm/exynos/exynos_mixer.o: in function `mixer_bind':
exynos_mixer.c:(.text+0x958): undefined reference to `clk_set_parent'
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Since commit 9495b7e92f ("driver core: platform: Initialize dma_parms
for platform devices"), struct platform_device already provides a
dma_parms structure, so we can save allocating another one.
Also the DMA segment size is simply a size, not a bitmask.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
In situations where the GPU is mostly idle, all or nearly all buffer
objects will be in the inactive list. But if the system is under memory
pressure (from something other than GPU), we could still get a lot of
shrinker calls. Which results in traversing a list of thousands of objs
and in the end finding nothing to shrink. Which isn't so efficient.
Instead split the inactive_list into two lists, one inactive objs which
are shrinkable, and a second one for those that are not. This way we
can avoid traversing objs which we know are not shrinker candidates.
v2: Fix inverted logic think-o
Signed-off-by: Rob Clark <robdclark@chromium.org>
Previously we only held obj lock in the _active_get() path, and relied
on atomic_dec_return() to not be racy in the _active_put() path where
obj lock was not held.
But this is a false sense of security. Unlike obj lifetime refcnt,
where you do not expect to *increase* the refcnt after the last put
(which would mean that something has gone horribly wrong with the
object liveness reference counting), the active_count can increase
again from zero. Racing _active_put()s and _active_get()s could leave
the obj on the wrong mm list.
But in the retire path, immediately after the _active_put(), the
_unpin_iova() would acquire obj lock. So just move the locking earlier
and rely on that to protect obj->active_count.
Fixes: c5c1643cef ("drm/msm: Drop struct_mutex from the retire path")
Signed-off-by: Rob Clark <robdclark@chromium.org>
In the patch to be fixed, horizontal_backporch_byte become too large
for some panel, so roll back that patch. For small hfp or hbp panel,
using vm->hfront_porch + vm->hback_porch to calculate
horizontal_backporch_byte would make it negtive, so
use horizontal_backporch_byte itself to make it positive.
Fixes: 35bf948f1e ("drm/mediatek: dsi: Fix scrolling of panel with small hfp or hbp")
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Tested-by: Bilal Wasim <bilal.wasim@imgtec.com>
The init sequence consist of a number of unknown settings
for the display controller. This patch achieves two things:
- Fix an error that must have happened when the driver was
converted from the backlight subsystem: the 0xb8
configuration command was lost and added as a tail to
the previous command.
- Update some minor settings in some bytes here and there
according to changes in the Samsung GT-I9070 and
Samsung GT-S7710 code dumps. Since two other devices use
these settings they probably reflect trimmings later
found to be better for the display rather than
customizations for these devices.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117175621.870085-3-linus.walleij@linaro.org
