Kernel commit 88903c4643 ("tracing/probe: Add ustring type for user-space string")
adds support for user-space strings when type 'ustring' is specified.
Here is an example using sysfs command line interface
for kprobes:
Function to probe:
struct filename *
getname_flags(const char __user *filename, int flags, int *empty)
Setup:
# cd /sys/kernel/debug/tracing/
# echo 'p:tmr1 getname_flags +0(%r2):ustring' > kprobe_events
# cat events/kprobes/tmr1/format | fgrep print
print fmt: "(%lx) arg1=\"%s\"", REC->__probe_ip, REC->arg1
# echo 1 > events/kprobes/tmr1/enable
# touch /tmp/111
# echo 0 > events/kprobes/tmr1/enable
# cat trace|fgrep /tmp/111
touch-5846 [005] d..2 255520.717960: tmr1:\
(getname_flags+0x0/0x400) arg1="/tmp/111"
Doing the same with the perf tool fails.
Using type 'string' succeeds:
# perf probe "vfs_getname=getname_flags:72 pathname=filename:string"
Added new event:
probe:vfs_getname (on getname_flags:72 with pathname=filename:string)
....
# perf probe -d probe:vfs_getname
Removed event: probe:vfs_getname
However using type 'ustring' fails (output before):
# perf probe "vfs_getname=getname_flags:72 pathname=filename:ustring"
Failed to write event: Invalid argument
Error: Failed to add events.
#
Fix this by adding type 'ustring' in function
convert_variable_type().
Using ustring succeeds (output after):
# ./perf probe "vfs_getname=getname_flags:72 pathname=filename:ustring"
Added new event:
probe:vfs_getname (on getname_flags:72 with pathname=filename:ustring)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_getname -aR sleep 1
#
Note: This issue also exists on x86, it is not s390 specific.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: sumanthk@linux.ibm.com
Link: http://lore.kernel.org/lkml/20200120132011.64698-2-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit a2408a7036 ("perf evlist: Maintain evlist->all_cpus")
introduces a test case for cpumap merge operation, see functions
perf_cpu_map__merge() and test__cpu_map_merge().
The test case fails on s390 with this error message:
[root@m35lp76 perf]# ./perf test -Fvvvvv 52
52: Merge cpu map :
--- start ---
cpumask list: 1-2,4-5,7
perf: /root/linux/tools/include/linux/refcount.h:131:\
refcount_sub_and_test: Assertion `!(new > val)' failed.
Aborted (core dumped)
[root@m35lp76 perf]#
The root cause is in the function test__cpu_map_merge():
It creates two cpu_maps named 'a' and 'b':
struct perf_cpu_map *a = perf_cpu_map__new("4,2,1");
struct perf_cpu_map *b = perf_cpu_map__new("4,5,7");
and creates a third map named 'c' which is the result of
the merge of maps a and b:
struct perf_cpu_map *c = perf_cpu_map__merge(a, b);
After some verifaction of the merged cpu_map all three
of them are have their reference count reduced and are
freed:
perf_cpu_map__put(a); (1)
perf_cpu_map__put(b);
perf_cpu_map__put(c);
The release of perf_cpu_map__put(a) is wrong. The map
is already released and free'ed as part of the function
perf_cpu_map__merge(struct perf_cpu_map *orig,
| struct perf_cpu_map *other)
+--> perf_cpu_map__put(orig);
|
+--> cpu_map__delete(orig)
At the end perf_cpu_map_put() is called for map 'orig'
alias 'a' and since the reference count is 1, the map
is deleted, as can be seen by the following gdb trace:
(gdb) where
#0 tcache_put (tc_idx=0, chunk=0x156cc30) at malloc.c:2940
#1 _int_free (av=0x3fffd49ee80 <main_arena>, p=0x156cc30,
have_lock=<optimized out>) at malloc.c:4222
#2 0x00000000012d5e78 in cpu_map__delete (map=0x156cc40) at cpumap.c:31
#3 0x00000000012d5f7a in perf_cpu_map__put (map=0x156cc40) at cpumap.c:45
#4 0x00000000012d723a in perf_cpu_map__merge (orig=0x156cc40,
other=0x156cc60) at cpumap.c:343
#5 0x000000000110cdd0 in test__cpu_map_merge (
test=0x14ea6c8 <generic_tests+2856>, subtest=-1) at tests/cpumap.c:128
Thus the perf_cpu_map__put(a) (see (1) above) frees map 'a'
a second time and causes the failure. Fix this be removing that
function call.
Output after:
[root@m35lp76 perf]# ./perf test -Fvvvvv 52
52: Merge cpu map :
--- start ---
cpumask list: 1-2,4-5,7
---- end ----
Merge cpu map: Ok
[root@m35lp76 perf]#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: sumanthk@linux.ibm.com
Link: http://lore.kernel.org/lkml/20200120132011.64698-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf with CoreSight fails to record trace data with command:
perf record -e cs_etm/@tmc_etr0/u --per-thread ls
failed to set sink "" on event cs_etm/@tmc_etr0/u with 21 (Is a
directory)/perf/
This failure is root caused with the commit 1dc925568f ("perf
parse: Add a deep delete for parse event terms").
The log shows, cs_etm fails to parse the sink attribution; cs_etm event
relies on the event configuration to pass sink name, but the event
specific configuration data cannot be passed properly with flow:
get_config_terms()
ADD_CONFIG_TERM(DRV_CFG, term->val.str);
__t->val.str = term->val.str;
`> __t->val.str is assigned to term->val.str;
parse_events_terms__purge()
parse_events_term__delete()
zfree(&term->val.str);
`> term->val.str is freed and assigned to NULL pointer;
cs_etm_set_sink_attr()
sink = __t->val.str;
`> sink string has been freed.
To fix this issue, in the function get_config_terms(), this patch
changes to use strdup() for allocation a new duplicate string rather
than directly assignment string pointer.
This patch addes a new field 'free_str' in the data structure
perf_evsel_config_term; 'free_str' is set to true when the union is used
as a string pointer; thus it can tell perf_evsel__free_config_terms() to
free the string.
Fixes: 1dc925568f ("perf parse: Add a deep delete for parse event terms")
Suggested-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20200117055251.24058-2-leo.yan@linaro.org
[ Use zfree() in perf_evsel__free_config_terms ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
:# modified: tools/perf/util/evsel_config.h
The struct perf_evsel_config_term::val is a union which contains fields
'callgraph', 'drv_cfg' and 'branch' as string pointers. This leads to
the complex code logic for handling every type's string separately, and
it's hard to release string as a general way.
This patch refactors the structure to add a common field 'str' in the
'val' union as string pointer and remove the other three fields
'callgraph', 'drv_cfg' and 'branch'. Without passing field name, the
patch simplifies the string handling with macro ADD_CONFIG_TERM_STR()
for string pointer assignment.
This patch fixes multiple warnings of line over 80 characters detected
by checkpatch tool.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20200117055251.24058-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf report:
Andi Kleen:
- Clarify in help that --children is default.
Jin Yao:
- Fix no libunwind compiled warning breaking s390.
perf annotate/report/top:
Andi Kleen:
- Support --prefix/--prefix-strip, use it with objdump when doing disassembly.
perf c2c:
Andres Freund:
- Fix return type for histogram sorting comparision functions.
perf header:
Michael Petlan:
- Use last modification time for timestamp, i.e. st.st_mtime instead
of the st_ctime.
perf beauty:
Cengiz Can:
- Fix sockaddr printf format for long integers.
libperf:
Jiri Olsa:
- Setup initial evlist::all_cpus value
perf parser:
Jiri Olsa:
- Use %define api.pure full instead of %pure-parser, nuking warning
from bison about using deprecated stuff.
perf ui gtk:
- Add missing zalloc object, fixing gtk browser build.
perf clang:
Maciej S. Szmigiero:
- Fix build issues with Clang 9 and 8+.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXiBnlAAKCRCyPKLppCJ+
J8TcAQCPbf43ujtzFaWXuMWP6eYHIhZmKpMwydokpQyldhLJVwD+MWHizZayMV7z
oS+csWt7lWL3X/Jc5UPIXPYfZ4oS4wM=
=pBN7
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-5.6-20200116' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
perf report:
Andi Kleen:
- Clarify in help that --children is default.
Jin Yao:
- Fix no libunwind compiled warning breaking s390.
perf annotate/report/top:
Andi Kleen:
- Support --prefix/--prefix-strip, use it with objdump when doing disassembly.
perf c2c:
Andres Freund:
- Fix return type for histogram sorting comparision functions.
perf header:
Michael Petlan:
- Use last modification time for timestamp, i.e. st.st_mtime instead
of the st_ctime.
perf beauty:
Cengiz Can:
- Fix sockaddr printf format for long integers.
libperf:
Jiri Olsa:
- Setup initial evlist::all_cpus value
perf parser:
Jiri Olsa:
- Use %define api.pure full instead of %pure-parser, nuking warning
from bison about using deprecated stuff.
perf ui gtk:
- Add missing zalloc object, fixing gtk browser build.
perf clang:
Maciej S. Szmigiero:
- Fix build issues with Clang 9 and 8+.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull networking fixes from David Miller:
1) Fix non-blocking connect() in x25, from Martin Schiller.
2) Fix spurious decryption errors in kTLS, from Jakub Kicinski.
3) Netfilter use-after-free in mtype_destroy(), from Cong Wang.
4) Limit size of TSO packets properly in lan78xx driver, from Eric
Dumazet.
5) r8152 probe needs an endpoint sanity check, from Johan Hovold.
6) Prevent looping in tcp_bpf_unhash() during sockmap/tls free, from
John Fastabend.
7) hns3 needs short frames padded on transmit, from Yunsheng Lin.
8) Fix netfilter ICMP header corruption, from Eyal Birger.
9) Fix soft lockup when low on memory in hns3, from Yonglong Liu.
10) Fix NTUPLE firmware command failures in bnxt_en, from Michael Chan.
11) Fix memory leak in act_ctinfo, from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits)
cxgb4: reject overlapped queues in TC-MQPRIO offload
cxgb4: fix Tx multi channel port rate limit
net: sched: act_ctinfo: fix memory leak
bnxt_en: Do not treat DSN (Digital Serial Number) read failure as fatal.
bnxt_en: Fix ipv6 RFS filter matching logic.
bnxt_en: Fix NTUPLE firmware command failures.
net: systemport: Fixed queue mapping in internal ring map
net: dsa: bcm_sf2: Configure IMP port for 2Gb/sec
net: dsa: sja1105: Don't error out on disabled ports with no phy-mode
net: phy: dp83867: Set FORCE_LINK_GOOD to default after reset
net: hns: fix soft lockup when there is not enough memory
net: avoid updating qdisc_xmit_lock_key in netdev_update_lockdep_key()
net/sched: act_ife: initalize ife->metalist earlier
netfilter: nat: fix ICMP header corruption on ICMP errors
net: wan: lapbether.c: Use built-in RCU list checking
netfilter: nf_tables: fix flowtable list del corruption
netfilter: nf_tables: fix memory leak in nf_tables_parse_netdev_hooks()
netfilter: nf_tables: remove WARN and add NLA_STRING upper limits
netfilter: nft_tunnel: ERSPAN_VERSION must not be null
netfilter: nft_tunnel: fix null-attribute check
...
Pull perf fixes from Ingo Molnar:
"Tooling fixes, three Intel uncore driver fixes, plus an AUX events fix
uncovered by the perf fuzzer"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Remove PCIe3 unit for SNR
perf/x86/intel/uncore: Fix missing marker for snr_uncore_imc_freerunning_events
perf/x86/intel/uncore: Add PCI ID of IMC for Xeon E3 V5 Family
perf: Correctly handle failed perf_get_aux_event()
perf hists: Fix variable name's inconsistency in hists__for_each() macro
perf map: Set kmap->kmaps backpointer for main kernel map chunks
perf report: Fix incorrectly added dimensions as switch perf data file
tools lib traceevent: Fix memory leakage in filter_event
Daniel Borkmann says:
====================
pull-request: bpf 2020-01-15
The following pull-request contains BPF updates for your *net* tree.
We've added 12 non-merge commits during the last 9 day(s) which contain
a total of 13 files changed, 95 insertions(+), 43 deletions(-).
The main changes are:
1) Fix refcount leak for TCP time wait and request sockets for socket lookup
related BPF helpers, from Lorenz Bauer.
2) Fix wrong verification of ARSH instruction under ALU32, from Daniel Borkmann.
3) Batch of several sockmap and related TLS fixes found while operating
more complex BPF programs with Cilium and OpenSSL, from John Fastabend.
4) Fix sockmap to read psock's ingress_msg queue before regular sk_receive_queue()
to avoid purging data upon teardown, from Lingpeng Chen.
5) Fix printing incorrect pointer in bpftool's btf_dump_ptr() in order to properly
dump a BPF map's value with BTF, from Martin KaFai Lau.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Using .st_ctime clobbers the timestamp information in perf report header
whenever any operation is done with the file. Even tar-ing and untar-ing
the perf.data file (which preserves the file last modification timestamp)
doesn't prevent that:
[Michael@Diego tmp]$ ls -l perf.data
-> -rw-------. 1 Michael Michael 169888 Dec 2 15:23 perf.data
[Michael@Diego tmp]$ perf report --header-only
# ========
-> # captured on : Mon Dec 2 15:23:42 2019
[...]
[Michael@Diego tmp]$ tar c perf.data | xz > perf.data.tar.xz
[Michael@Diego tmp]$ mkdir aaa
[Michael@Diego tmp]$ cd aaa
[Michael@Diego aaa]$ xzcat ../perf.data.tar.xz | tar x
[Michael@Diego aaa]$ ls -l -a
total 172
drwxrwxr-x. 2 Michael Michael 23 Jan 14 11:26 .
drwxrwxr-x. 6 Michael Michael 4096 Jan 14 11:26 ..
-> -rw-------. 1 Michael Michael 169888 Dec 2 15:23 perf.data
[Michael@Diego aaa]$ perf report --header-only
# ========
-> # captured on : Tue Jan 14 11:26:16 2020
[...]
When using .st_mtime instead, correct information is printed:
[Michael@Diego aaa]$ ~/acme/tools/perf/perf report --header-only
# ========
-> # captured on : Mon Dec 2 15:23:42 2019
[...]
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
LPU-Reference: 20200114104236.31555-1-mpetlan@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Mausezahn does not recognize "own" as a keyword on source IP address. As a
result, the MC stream is not running at all, and therefore no UC
degradation can be observed even in principle.
Fix the invocation, and tighten the test: due to the minimum shaper
configured at the MC TCs, we always expect about 20% degradation. Fail the
test if it is lower.
Fixes: 573363a68f ("selftests: mlxsw: Add qos_lib.sh")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reported-by: Amit Cohen <amitc@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The sockaddr related examples given in
`tools/perf/examples/bpf/augmented_syscalls.c` almost always use `long`s
to represent most of their fields.
However, `size_t syscall_arg__scnprintf_sockaddr(..)` has a `scnprintf`
call that uses `"%#x"` as format string.
This throws a warning (whenever the syscall argument is `unsigned
long`).
Added `l` identifier to indicate that the `arg->value` is an unsigned
long.
Not sure about the complications of this with x86 though.
Signed-off-by: Cengiz Can <cengiz@kernel.wtf>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200113174438.102975-1-cengiz@kernel.wtf
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ravi Bangoria reported an issue when doing the gtk2 feature detection on
Fedora 31, where some types got deprecated:
/usr/include/gtk-2.0/gtk/gtktypeutils.h:236:1: error: ‘GTypeDebugFlags’ is deprecated [-Werror=deprecated-declarations]
236 | void gtk_type_init (GTypeDebugFlags debug_flags);
Fix this for perf by allowing the compile to pass with deprecated
symbols via the -Wno-deprecated-declarations compiler directive.
Reported-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jelle van der Waa <jelle@vdwaa.nl>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200113104358.123511-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we moved zalloc.o to the library we missed gtk library which needs
it compiled in, otherwise the missing __zfree symbol will cause the
library to fail to load.
Adding the zalloc object to the gtk library build.
Fixes: 7f7c536f23 ("tools lib: Adopt zalloc()/zfree() from tools/perf")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jelle van der Waa <jelle@vdwaa.nl>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200113104358.123511-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
bison deprecated the "%pure-parser" directive in favor of "%define
api.pure full".
The api.pure got introduced in bison 2.3 (Oct 2007), so it seems safe to
use it without any version check.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lore.kernel.org/lkml/20200112192259.GA35080@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jann Horn reported crash in perf ftrace because evlist::all_cpus isn't
initialized if there's evlist without events, which is the case for perf
ftrace.
Adding initial initialization of evlist::all_cpus from given cpus,
regardless of events in the evlist.
Fixes: 7736627b86 ("perf stat: Use affinity for closing file descriptors")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200110151537.153012-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 800d3f5616 ("perf report: Add warning when libunwind not
compiled in") breaks the s390 platform. S390 uses libdw-dwarf-unwind for
call chain unwinding and had no support for libunwind.
So the warning "Please install libunwind development packages during the
perf build." caused the confusion even if the call-graph is displayed
correctly.
This patch adds checking for HAVE_DWARF_SUPPORT, which is set when
libdw-dwarf-unwind is compiled in.
Fixes: 800d3f5616 ("perf report: Add warning when libunwind not compiled in")
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Thomas Richter <tmricht@linux.ibm.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200107191745.18415-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The objdump utility has useful --prefix / --prefix-strip options to
allow changing source code file names hardcoded into executables' debug
info. Add options to 'perf report', 'perf top' and 'perf annotate',
which are then passed to objdump.
$ mkdir foo
$ echo 'main() { for (;;); }' > foo/foo.c
$ gcc -g foo/foo.c
foo/foo.c:1:1: warning: return type defaults to ‘int’ [-Wimplicit-int]
1 | main() { for (;;); }
| ^~~~
$ perf record ./a.out
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.230 MB perf.data (5721 samples) ]
$ mv foo bar
$ perf annotate
<does not show source code>
$ perf annotate --prefix=/home/ak/lsrc/git/bar --prefix-strip=5
<does show source code>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
LPU-Reference: 20200107210444.214071-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Refer to --no-children, which is what most people probably want.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
LPU-Reference: 20200103183643.149150-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
LLVM rL344140 (included in Clang 8+) moved VFS from Clang to LLVM, so
paths to its include files have changed.
This broke the Clang test in tools/build - let's fix it.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Denis Pronin <dannftk@yandex.ru>
Cc: Dennis Schridde <devurandom@gmx.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: clang-built-linux@googlegroups.com
Link: http://lore.kernel.org/lkml/20191228171314.946469-1-mail@maciej.szmigiero.name
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
LLVM D59377 (included in Clang 9) refactored Clang VFS construction a
bit, which broke perf clang build. Let's fix it.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Reviewed-by: Dennis Schridde <devurandom@gmx.net>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: clang-built-linux@googlegroups.com
Cc: Denis Pronin <dannftk@yandex.ru>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191228171314.946469-2-mail@maciej.szmigiero.name
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For plain text output, it incorrectly prints the pointer value
"void *data". The "void *data" is actually pointing to memory that
contains a bpf-map's value. The intention is to print the content of
the bpf-map's value instead of printing the pointer pointing to the
bpf-map's value.
In this case, a member of the bpf-map's value is a pointer type.
Thus, it should print the "*(void **)data".
Fixes: 22c349e8db ("tools: bpftool: fix format strings and arguments for jsonw_printf()")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Link: https://lore.kernel.org/bpf/20200110231644.3484151-1-kafai@fb.com
Pull networking fixes from David Miller:
1) Missing netns pointer init in arp_tables, from Florian Westphal.
2) Fix normal tcp SACK being treated as D-SACK, from Pengcheng Yang.
3) Fix divide by zero in sch_cake, from Wen Yang.
4) Len passed to skb_put_padto() is wrong in qrtr code, from Carl
Huang.
5) cmd->obj.chunk is leaked in sctp code error paths, from Xin Long.
6) cgroup bpf programs can be released out of order, fix from Roman
Gushchin.
7) Make sure stmmac debugfs entry name is changed when device name
changes, from Jiping Ma.
8) Fix memory leak in vlan_dev_set_egress_priority(), from Eric
Dumazet.
9) SKB leak in lan78xx usb driver, also from Eric Dumazet.
10) Ridiculous TCA_FQ_QUANTUM values configured can cause loops in fq
packet scheduler, reject them. From Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
tipc: fix wrong connect() return code
tipc: fix link overflow issue at socket shutdown
netfilter: ipset: avoid null deref when IPSET_ATTR_LINENO is present
netfilter: conntrack: dccp, sctp: handle null timeout argument
atm: eni: fix uninitialized variable warning
macvlan: do not assume mac_header is set in macvlan_broadcast()
net: sch_prio: When ungrafting, replace with FIFO
mlxsw: spectrum_qdisc: Ignore grafting of invisible FIFO
MAINTAINERS: Remove myself as co-maintainer for qcom-ethqos
gtp: fix bad unlock balance in gtp_encap_enable_socket
pkt_sched: fq: do not accept silly TCA_FQ_QUANTUM
tipc: remove meaningless assignment in Makefile
tipc: do not add socket.o to tipc-y twice
net: stmmac: dwmac-sun8i: Allow all RGMII modes
net: stmmac: dwmac-sunxi: Allow all RGMII modes
net: usb: lan78xx: fix possible skb leak
net: stmmac: Fixed link does not need MDIO Bus
vlan: vlan_changelink() should propagate errors
vlan: fix memory leak in vlan_dev_set_egress_priority
stmmac: debugfs entry name is not be changed when udev rename device name.
...
Disable a couple of compilation warnings (which are treated as errors)
on strlcpy() definition and declaration, allowing users to compile perf
and kernel (objtool) when:
1. glibc have strlcpy() (such as in ALT Linux since 2004) objtool and
perf build fails with this (in gcc):
In file included from exec-cmd.c:3:
tools/include/linux/string.h:20:15: error: redundant redeclaration of ‘strlcpy’ [-Werror=redundant-decls]
20 | extern size_t strlcpy(char *dest, const char *src, size_t size);
2. clang ignores `-Wredundant-decls', but produces another warning when
building perf:
CC util/string.o
../lib/string.c:99:8: error: attribute declaration must precede definition [-Werror,-Wignored-attributes]
size_t __weak strlcpy(char *dest, const char *src, size_t size)
../../tools/include/linux/compiler.h:66:34: note: expanded from macro '__weak'
# define __weak __attribute__((weak))
/usr/include/bits/string_fortified.h:151:8: note: previous definition is here
__NTH (strlcpy (char *__restrict __dest, const char *__restrict __src,
Committer notes:
The
#pragma GCC diagnostic
directive was introduced in gcc 4.6, so check for that as well.
Fixes: ce99091 ("perf tools: Move strlcpy() from perf to tools/lib/string.c")
Fixes: 0215d59 ("tools lib: Reinstate strlcpy() header guard with __UCLIBC__")
Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=118481
Signed-off-by: Vitaly Chikunov <vt@altlinux.org>
Reviewed-by: Dmitry Levin <ldv@altlinux.org>
Cc: Dmitry Levin <ldv@altlinux.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: kbuild test robot <lkp@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Cc: Vineet Gupta <vineet.gupta1@synopsys.com>
Link: http://lore.kernel.org/lkml/20191224172029.19690-1-vt@altlinux.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'e' and 'c' hotkeys were present for a long time, but not documented
in the help window, change 'e' to be a toggle so that it gets consistent
with other toggles like '+' and document it in the help window.
Keep 'c' as is for people used to it but don't document, as it is easier
to just use 'e' to show/hide all the callchains for a top level
histogram entry.
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-pmyi5x34stlqmyu81rci94x9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This can happen in the --children mode, i.e. the default mode when
callchains are present, where one of the main entries may be a callchain
entry with no samples.
So far we were not providing any information about why an annotation
couldn't be provided even offering the Annotation option in the popup
menu.
Work is needed to allow for no-samples "annotation', i.e. to show the
disassembly anyway and allow for navigation, etc.
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-0hhzj2de15o88cguy7h66zre@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the users presses ENTER in the main 'perf report/top' screen a
popup menu is presented, in it some hotkeys are suggested as
alternatives to using the menu, or for additional features.
At that point the user may try those hotkeys, so allow for that by
recording the key used and exiting, the caller then can check for that
possibility and process the hotkey.
I.e. try pressing ENTER, and then 'k' to exit and zoom into the kernel
map, using ESC then zooms out, etc.
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-ujfq3fw44kf6qrtfajl5dcsp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With this patch if an optional pointer is passed to ui__popup_menu()
then when any key that is not being handled (ENTER, ESC, etc) is typed,
it'll record that key in the pointer and return, allowing for hotkey
processing on the caller.
If NULL is passed, no change in logic, unhandled keys continue to be
ignored.
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-6ojn19mqzgmrdm8kdoigic0m@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sometimes we're in an outer code, like the main hists browser popup menu
and the user follows a suggestion about using some hotkey, and that
hotkey is really handled by hists_browser__run(), so allow for calling
it with that hotkey, making it handle it instead of waiting for the user
to press one.
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-xv2l7i6o4urn37nv1h40ryfs@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As a convenience, equivalent to pressing Enter in a line with a kernel
symbol and then selecting "Zoom" into the kernel DSO.
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-vbnlnrpyfvz9deqoobtc3dz7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We'll use it to provide a top level hotkey to zoom into the kernel dso
directly.
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-ae9cjel6v05wjnz9r6z77b6x@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Taking into account the current status of the callchain, i.e. if folded,
show "Expand", otherwise "Collapse", also show the name of the entry
that will be affected and mention the hotkeys for expanding/collapsing
all callchains below the main entry, the one that appears with/without
callchains.
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-03arm6poo8463k5tfcfp7gkk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since previously pressing ENTER toggled expansion/collapse of callchain
entries and now brings up the same menu used when callchains are not
present, add an entry so that users can quickly figure out the change in
behaviour.
Its worth mentioning that we also always had 'e'/'c' to expand/collapse
all entries in a hist entry and 'E'/'C' for all hist entries.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-f9o03jo29fypvd8ly3j49d36@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When callchains are present the ENTER key switches from bringing up the
menu that offers Annotation, Zoom by DSO, etc to expanding/collapsing
one callchain level, causing confusion, fix it by making it consistently
bring up the menu and use '+' to expand/collapse one callchain level.
Next patch will also add an entry to the menu to allow
expanding/collapsing, so that people used to ENTER expanding one
callchain level can quickly find it and use it instead.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-bjz35omktig8cwn6lbj1ifns@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to set actions->ms.map since 599a2f38a9 ("perf hists browser:
Check sort keys before hot key actions"), as in that patch we bail out
if map is NULL.
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: 599a2f38a9 ("perf hists browser: Check sort keys before hot key actions")
Link: https://lkml.kernel.org/n/tip-wp1ssoewy6zihwwexqpohv0j@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
GCC9 introduced string hardening mechanisms, which exhibits the error
during fs api compilation:
error: '__builtin_strncpy' specified bound 4096 equals destination size
[-Werror=stringop-truncation]
This comes when the length of copy passed to strncpy is is equal to
destination size, which could potentially lead to buffer overflow.
There is a need to mitigate this potential issue by limiting the size of
destination by 1 and explicitly terminate the destination with NULL.
Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20191211080109.18765-1-andrey.zhizhikin@leica-geosystems.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Change the man page generation to asciidoc, because it's easier to use
and has been more commonly used in related projects. Remove the current
rst pages.
Add 3 man pages to have a base for more additions:
libperf.3 - overall description
libperf-counting.7 - counting basics explained on simple example
libperf-sampling.7 - sampling basics explained on simple example
The plan is to add more man pages to cover the basic API.
The build generates html and man pages:
$ cd tools/lib/perf/Documentation
$ make
ASCIIDOC libperf.xml
XMLTO libperf.3
ASCIIDOC libperf-counting.xml
XMLTO libperf-counting.7
ASCIIDOC libperf-sampling.xml
XMLTO libperf-sampling.7
ASCIIDOC libperf.html
ASCIIDOC libperf-counting.html
ASCIIDOC libperf-sampling.html
Add the following install targets:
install-man - man pages
install-html - html version of man pages
install-examples - examples mentioned in the man pages
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191206210612.8676-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move libperf from its current location under tools/perf to a separate
directory under tools/lib/.
Also change various paths (mainly includes) to reflect the libperf move
to a separate directory and add a new directory under MANIFEST.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191206210612.8676-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To help understand failures.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-c951j3gvrgnrsyg7ki7pwkiz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allow user to limit output to one or more CPUs. Really helpful on
systems with a large number of cpus.
Committer testing:
# perf sched record -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.765 MB perf.data (1412 samples) ]
[root@quaco ~]# perf sched timehist | head
Samples do not have callchains.
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- ---------
66307.802686 [0000] perf[13086] 0.000 0.000 0.000
66307.802700 [0000] migration/0[12] 0.000 0.001 0.014
66307.802766 [0001] perf[13086] 0.000 0.000 0.000
66307.802774 [0001] migration/1[15] 0.000 0.001 0.007
66307.802841 [0002] perf[13086] 0.000 0.000 0.000
66307.802849 [0002] migration/2[20] 0.000 0.001 0.008
66307.802913 [0003] perf[13086] 0.000 0.000 0.000
#
# perf sched timehist --cpu 2 | head
Samples do not have callchains.
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- ---------
66307.802841 [0002] perf[13086] 0.000 0.000 0.000
66307.802849 [0002] migration/2[20] 0.000 0.001 0.008
66307.964485 [0002] <idle> 0.000 0.000 161.635
66307.964811 [0002] CPU 0/KVM[3589/3561] 0.000 0.056 0.325
66307.965477 [0002] <idle> 0.325 0.000 0.666
66307.965553 [0002] CPU 0/KVM[3589/3561] 0.666 0.024 0.076
66307.966456 [0002] <idle> 0.076 0.000 0.903
#
Signed-off-by: David Ahern <dsahern@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20191204173925.66976-1-dsahern@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use struct mmap_cpu_mask type for the tool's thread and mmap data
buffers to overcome current 1024 CPUs mask size limitation of cpu_set_t
type.
Currently glibc's cpu_set_t type has an internal mask size limit of 1024
CPUs.
Moving to the 'struct mmap_cpu_mask' type allows overcoming that limit.
The tools bitmap API is used to manipulate objects of 'struct mmap_cpu_mask'
type.
Committer notes:
To print the 'nbits' struct member we must use %zd, since it is a
size_t, this fixes the build in some toolchains/arches.
Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/96d7e2ff-ce8b-c1e0-d52c-aa59ea96f0ea@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Declare a dedicated struct map_cpu_mask type for cpu masks of arbitrary
length.
The mask is available thru bits pointer and the mask length is kept in
nbits field. MMAP_CPU_MASK_BYTES() macro returns mask storage size in
bytes.
The mmap_cpu_mask__scnprintf() function can be used to log text
representation of the mask.
Committer notes:
To print the 'nbits' struct member we must use %zd, since it is a
size_t, this fixes the build in some toolchains/arches.
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/0fd2454f-477f-d15a-f4ee-79bcbd2585ff@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Extend tools bitmap API with bitmap_equal() implementation.
The implementation has been derived from the kernel.
Extend tools bitmap API with bitmap_free() implementation for symmetry
with bitmap_alloc() function.
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/43757993-0b28-d8af-a6c7-ede12e3a6877@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The loopback feature is only supported on a few drivers like broadcom,
mellanox, etc. The default veth driver has not supported it yet. To avoid
returning failed and making the runner feel confused, let's just skip
the test on drivers that not support loopback.
Fixes: ad11340994 ("selftests: Add loopback test")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Fix samples and selftests to zero passed-in buffer (Sargun Dhillon)
- Enforce zeroed buffer checking (Sargun Dhillon)
- Verify buffer sanity check in selftest (Sargun Dhillon)
-----BEGIN PGP SIGNATURE-----
Comment: Kees Cook <kees@outflux.net>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=WgBI
-----END PGP SIGNATURE-----
Merge tag 'seccomp-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp fixes from Kees Cook:
"Fixes for seccomp_notify_ioctl uapi sanity from Sargun Dhillon.
The bulk of this is fixing the surrounding samples and selftests so
that seccomp can correctly validate the seccomp_notify_ioctl buffer as
being initially zeroed.
Summary:
- Fix samples and selftests to zero passed-in buffer
- Enforce zeroed buffer checking
- Verify buffer sanity check in selftest"
* tag 'seccomp-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftests/seccomp: Catch garbage on SECCOMP_IOCTL_NOTIF_RECV
seccomp: Check that seccomp_notif is zeroed out by the user
selftests/seccomp: Zero out seccomp_notif
samples/seccomp: Zero out members based on seccomp_notif_sizes
This adds logic to the user_notification_basic test to set a member
of struct seccomp_notif to an invalid value to ensure that the kernel
returns EINVAL if any of the struct seccomp_notif members are set to
invalid values.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Suggested-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20191230203811.4996-1-sargun@sargun.me
Fixes: 6a21cc50f0 ("seccomp: add a return code to trap to userspace")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
The seccomp_notif structure should be zeroed out prior to calling the
SECCOMP_IOCTL_NOTIF_RECV ioctl. Previously, the kernel did not check
whether these structures were zeroed out or not, so these worked.
This patch zeroes out the seccomp_notif data structure prior to calling
the ioctl.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Reviewed-by: Tycho Andersen <tycho@tycho.ws>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20191229062451.9467-1-sargun@sargun.me
Fixes: 6a21cc50f0 ("seccomp: add a return code to trap to userspace")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Pull networking fixes from David Miller:
1) Fix big endian overflow in nf_flow_table, from Arnd Bergmann.
2) Fix port selection on big endian in nft_tproxy, from Phil Sutter.
3) Fix precision tracking for unbound scalars in bpf verifier, from
Daniel Borkmann.
4) Fix integer overflow in socket rcvbuf check in UDP, from Antonio
Messina.
5) Do not perform a neigh confirmation during a pmtu update over a
tunnel, from Hangbin Liu.
6) Fix DMA mapping leak in dpaa_eth driver, from Madalin Bucur.
7) Various PTP fixes for sja1105 dsa driver, from Vladimir Oltean.
8) Add missing to dummy definition of of_mdiobus_child_is_phy(), from
Geert Uytterhoeven
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits)
hsr: fix slab-out-of-bounds Read in hsr_debugfs_rename()
net/sched: add delete_empty() to filters and use it in cls_flower
tcp: Fix highest_sack and highest_sack_seq
ptp: fix the race between the release of ptp_clock and cdev
net: dsa: sja1105: Reconcile the meaning of TPID and TPID2 for E/T and P/Q/R/S
Documentation: net: dsa: sja1105: Remove text about taprio base-time limitation
net: dsa: sja1105: Remove restriction of zero base-time for taprio offload
net: dsa: sja1105: Really make the PTP command read-write
net: dsa: sja1105: Take PTP egress timestamp by port, not mgmt slot
cxgb4/cxgb4vf: fix flow control display for auto negotiation
mlxsw: spectrum: Use dedicated policer for VRRP packets
mlxsw: spectrum_router: Skip loopback RIFs during MAC validation
net: stmmac: dwmac-meson8b: Fix the RGMII TX delay on Meson8b/8m2 SoCs
net/sched: act_mirred: Pull mac prior redir to non mac_header_xmit device
net_sched: sch_fq: properly set sk->sk_pacing_status
bnx2x: Fix accounting of vlan resources among the PFs
bnx2x: Use appropriate define for vlan credit
of: mdio: Add missing inline to of_mdiobus_child_is_phy() dummy
net: phy: aquantia: add suspend / resume ops for AQR105
dpaa_eth: fix DMA mapping leak
...
