Certain configurations (e.g., systems that make heavy use of netns)
need to use synchronize_rcu_expedited() to service RCU grace periods
even after boot.
Even though synchronize_rcu_expedited() has been traditionally
considered harmful for RT for the heavy use of IPIs, it is perfectly
usable under certain conditions (e.g. nohz_full).
Make rcupdate.rcu_normal_after_boot= again writeable on RT (if NO_HZ_
FULL is defined), but keep its default value to 1 (enabled) to avoid
regressions. Users who need synchronize_rcu_expedited() will boot with
rcupdate.rcu_normal_after_ boot=0 in the kernel cmdline.
Reflect the change in synchronize_rcu_expedited_wait() by removing the
WARN related to CONFIG_PREEMPT_RT.
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The CPU-hotplug functions take a "cpu" parameter, but rcutree_dying_cpu()
ignores it in favor of this_cpu_ptr(). This works at the moment, but
it would be better to be consistent. This might also work better given
some possible future changes. This commit therefore uses per_cpu_ptr()
to avoid ignoring the rcutree_dying_cpu() function's argument.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, rcu_report_dead() disables preemption across its call to
rcu_report_exp_rdp(), but this is pointless because interrupts are
already disabled by the caller. In addition, rcu_report_dead() computes
the address of the outgoing CPU's rcu_data structure, which is also
pointless because this address is already present in local variable rdp.
This commit therefore drops the preemption disabling and passes rdp
to rcu_report_exp_rdp().
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The purpose of rcu_dynticks_eqs_online() is to adjust the ->dynticks
counter of an incoming CPU when required. It is currently invoked
from rcutree_prepare_cpu(), which runs before the incoming CPU is
running, and thus on some other CPU. This makes the per-CPU accesses in
rcu_dynticks_eqs_online() iffy at best, and it all "works" only because
the running CPU cannot possibly be in dyntick-idle mode, which means
that rcu_dynticks_eqs_online() never has any effect.
It is currently OK for rcu_dynticks_eqs_online() to have no effect, but
only because the CPU-offline process just happens to leave ->dynticks in
the correct state. After all, if ->dynticks were in the wrong state on a
just-onlined CPU, rcutorture would complain bitterly the next time that
CPU went idle, at least in kernels built with CONFIG_RCU_EQS_DEBUG=y,
for example, those built by rcutorture scenario TREE04. One could
argue that this means that rcu_dynticks_eqs_online() is unnecessary,
however, removing it would make the CPU-online process vulnerable to
slight changes in the CPU-offline process.
One could also ask why it is safe to move the rcu_dynticks_eqs_online()
call so late in the CPU-online process. Indeed, there was a time when it
would not have been safe, which does much to explain its current location.
However, the marking of a CPU as online from an RCU perspective has long
since moved from rcutree_prepare_cpu() to rcu_cpu_starting(), and all
that is required is that ->dynticks be set correctly by the time that
the CPU is marked as online from an RCU perspective. After all, the RCU
grace-period kthread does not check to see if offline CPUs are also idle.
(In case you were curious, this is one reason why there is quiescent-state
reporting as part of the offlining process.)
This commit therefore moves the call to rcu_dynticks_eqs_online() from
rcutree_prepare_cpu() to rcu_cpu_starting(), this latter being guaranteed
to be running on the incoming CPU. The call to this function must of
course be placed before this rcu_cpu_starting() announces this CPU's
presence to RCU.
Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Near the beginning of rcu_gp_init() is a per-rcu_node loop that waits
for CPU-hotplug operations that might have started before the new
grace period did. This commit adds a comment explaining that this
wait does not exclude CPU-hotplug operations.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Invoking scripts/checkkconfigsymbols.py in the Linux-kernel source tree
located the following issues:
1. TREE_PREEMPT_RCU
Referencing files: arch/sh/configs/sdk7786_defconfig
It should now be CONFIG_PREEMPT_RCU. Except that the CONFIG_PREEMPT=y in
that same file implies CONFIG_PREEMPT_RCU=y. Therefore, delete the
CONFIG_TREE_PREEMPT_RCU=y line.
The reason is as follows:
In kernel/rcu/Kconfig, we have
config PREEMPT_RCU
bool
default y if PREEMPTION
https://www.kernel.org/doc/Documentation/kbuild/kconfig-language.txt says,
"The default value is only assigned to the config symbol if no other value
was set by the user (via the input prompt above)."
there is no prompt in config PREEMPT_RCU entry, so we are guaranteed to
get CONFIG_PREEMPT_RCU=y when CONFIG_PREEMPT is present.
2. RCU_CPU_STALL_INFO
Referencing files: arch/xtensa/configs/nommu_kc705_defconfig
The old Kconfig option RCU_CPU_STALL_INFO was removed by commit
75c27f119b ("rcu: Remove CONFIG_RCU_CPU_STALL_INFO"), and the kernel
now acts as if this Kconfig option was unconditionally enabled.
3. RCU_NOCB_CPU_ALL
Referencing files:
Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.rst
This is an old snapshot of the code. I update this from the real
rcu_prepare_for_idle() function in kernel/rcu/tree_plugin.h.
This change was tested by invoking "make htmldocs".
4. RCU_TORTURE_TESTS
Referencing files: kernel/rcu/rcutorture.c
Forward-progress checking conflicts with CPU-stall testing, so we should
complain at "modprobe rcutorture" when both are enabled.
Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_implicit_dynticks_qs() function's local variable ruqp references
the ->rcu_urgent_qs field in the rcu_data structure referenced by the
function parameter rdp, with a rather odd method for computing the
pointer to this field. This commit therefore simplifies things and
saves a couple of lines of code by replacing each instance of ruqp with
&rdp->need_heavy_qs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_implicit_dynticks_qs() function's local variable rnhqp references
the ->rcu_need_heavy_qs field in the rcu_data structure referenced by
the function parameter rdp, with a rather odd method for computing
the pointer to this field. This commit therefore simplifies things
and saves a few lines of code by replacing each instance of rnhqp with
&rdp->need_heavy_qs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit removes a non-value-returning "return" statement at the end
of __call_rcu_nocb_wake() and adds a blank line following declarations
in nocb_cb_can_run().
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Turn previously auto-generated libbpf_version.h header into a normal
header file. This prevents various tricky Makefile integration issues,
simplifies the overall build process, but also allows to further extend
it with some more versioning-related APIs in the future.
To prevent accidental out-of-sync versions as defined by libbpf.map and
libbpf_version.h, Makefile checks their consistency at build time.
Simultaneously with this change bump libbpf.map to v0.6.
Also undo adding libbpf's output directory into include path for
kernel/bpf/preload, bpftool, and resolve_btfids, which is not necessary
because libbpf_version.h is just a normal header like any other.
Fixes: 0b46b75505 ("libbpf: Add LIBBPF_DEPRECATED_SINCE macro for scheduling API deprecations")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210913222309.3220849-1-andrii@kernel.org
Future work in the powerpc code results in a name collision with the
identified "node" as struct node defined in kernel/audit_tree.c
conflicts with struct node defined in include/linux/node.h (below).
This patch takes the proactive route and renames the audit code's
struct node to audit_node.
CC kernel/audit_tree.o
kernel/audit_tree.c:33:9: error: redefinition of 'struct node'
33 | struct node {
| ^~~~
In file included from ./include/linux/cpu.h:17,
from ./include/linux/static_call.h:102,
from ./arch/powerpc/include/asm/machdep.h:10,
from ./arch/powerpc/include/asm/archrandom.h:7,
from ./include/linux/random.h:121,
from ./include/linux/net.h:18,
from ./include/linux/skbuff.h:26,
from kernel/audit.h:11,
from kernel/audit_tree.c:2:
./include/linux/node.h:84:8: note: originally defined here
84 | struct node {
| ^~~~
make[2]: *** [kernel/audit_tree.o] Error 1
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
[PM: rewrite subj/desc as the build failure is just a RFC patch]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Since commit 1243dc518c ("cgroup/cpuset: Convert cpuset_mutex to
percpu_rwsem"), cpuset_mutex has been replaced by cpuset_rwsem which is
a percpu rwsem. However, the comments in kernel/cgroup/cpuset.c still
reference cpuset_mutex which are now incorrect.
Change all the references of cpuset_mutex to cpuset_rwsem.
Fixes: 1243dc518c ("cgroup/cpuset: Convert cpuset_mutex to percpu_rwsem")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Introduce bpf_get_branch_snapshot(), which allows tracing pogram to get
branch trace from hardware (e.g. Intel LBR). To use the feature, the
user need to create perf_event with proper branch_record filtering
on each cpu, and then calls bpf_get_branch_snapshot in the bpf function.
On Intel CPUs, VLBR event (raw event 0x1b00) can be use for this.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210910183352.3151445-3-songliubraving@fb.com
The typical way to access branch record (e.g. Intel LBR) is via hardware
perf_event. For CPUs with FREEZE_LBRS_ON_PMI support, PMI could capture
reliable LBR. On the other hand, LBR could also be useful in non-PMI
scenario. For example, in kretprobe or bpf fexit program, LBR could
provide a lot of information on what happened with the function. Add API
to use branch record for software use.
Note that, when the software event triggers, it is necessary to stop the
branch record hardware asap. Therefore, static_call is used to remove some
branch instructions in this process.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/bpf/20210910183352.3151445-2-songliubraving@fb.com
For some drivers, that use the DMA API. This error message can be reached
several millions of times per second, causing spam to the kernel's printk
buffer and bringing the CPU usage up to 100% (so, it should be rate
limited). However, since there is at least one driver that is in the
mainline and suffers from the error condition, it is more useful to
err_printk() here instead of just rate limiting the error message (in hopes
that it will make it easier for other drivers that suffer from this issue
to be spotted).
Link: https://lkml.kernel.org/r/fd67fbac-64bf-f0ea-01e1-5938ccfab9d0@arm.com
Reported-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Hamza Mahfooz <someguy@effective-light.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Pull scheduler fixes from Borislav Petkov:
- Make sure the idle timer expires in hardirq context, on PREEMPT_RT
- Make sure the run-queue balance callback is invoked only on the
outgoing CPU
* tag 'sched_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Prevent balance_push() on remote runqueues
sched/idle: Make the idle timer expire in hard interrupt context
Pull locking fixes from Borislav Petkov:
- Fix the futex PI requeue machinery to not return to userspace in
inconsistent state
- Avoid a potential null pointer dereference in the ww_mutex deadlock
check
- Other smaller cleanups and optimizations
* tag 'locking_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rtmutex: Fix ww_mutex deadlock check
futex: Remove unused variable 'vpid' in futex_proxy_trylock_atomic()
futex: Avoid redundant task lookup
futex: Clarify comment for requeue_pi_wake_futex()
futex: Prevent inconsistent state and exit race
futex: Return error code instead of assigning it without effect
locking/rwsem: Add missing __init_rwsem() for PREEMPT_RT
Pull tracing fixes from Steven Rostedt:
"Minor fixes to the processing of the bootconfig tree"
* tag 'trace-v5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
bootconfig: Rename xbc_node_find_child() to xbc_node_find_subkey()
tracing/boot: Fix to check the histogram control param is a leaf node
tracing/boot: Fix trace_boot_hist_add_array() to check array is value
Rename xbc_node_find_child() to xbc_node_find_subkey() for
clarifying that function returns a key node (no value node).
Since there are xbc_node_for_each_child() (loop on all child
nodes) and xbc_node_for_each_subkey() (loop on only subkey
nodes), this name distinction is necessary to avoid confusing
users.
Link: https://lkml.kernel.org/r/163119459826.161018.11200274779483115300.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
trace_boot_hist_add_array() uses the combination of
xbc_node_find_child() and xbc_node_get_child() to get the
child node of the key node. But since it missed to check
the child node is data node or not, user can pass the
subkey node for the array node (anode).
To avoid this issue, check the array node is a data node.
Actually, there is xbc_node_find_value(node, key, vnode),
which ensures the @vnode is a value node, so use it in
trace_boot_hist_add_array() to fix this issue.
Link: https://lkml.kernel.org/r/163119458308.161018.1516455973625940212.stgit@devnote2
Fixes: e66ed86ca6 ("tracing/boot: Add per-event histogram action options")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Introduce a macro LIBBPF_DEPRECATED_SINCE(major, minor, message) to prepare
the deprecation of two API functions. This macro marks functions as deprecated
when libbpf's version reaches the values passed as an argument.
As part of this change libbpf_version.h header is added with recorded major
(LIBBPF_MAJOR_VERSION) and minor (LIBBPF_MINOR_VERSION) libbpf version macros.
They are now part of libbpf public API and can be relied upon by user code.
libbpf_version.h is installed system-wide along other libbpf public headers.
Due to this new build-time auto-generated header, in-kernel applications
relying on libbpf (resolve_btfids, bpftool, bpf_preload) are updated to
include libbpf's output directory as part of a list of include search paths.
Better fix would be to use libbpf's make_install target to install public API
headers, but that clean up is left out as a future improvement. The build
changes were tested by building kernel (with KBUILD_OUTPUT and O= specified
explicitly), bpftool, libbpf, selftests/bpf, and resolve_btfids builds. No
problems were detected.
Note that because of the constraints of the C preprocessor we have to write
a few lines of macro magic for each version used to prepare deprecation (0.6
for now).
Also, use LIBBPF_DEPRECATED_SINCE() to schedule deprecation of
btf__get_from_id() and btf__load(), which are replaced by
btf__load_from_kernel_by_id() and btf__load_into_kernel(), respectively,
starting from future libbpf v0.6. This is part of libbpf 1.0 effort ([0]).
[0] Closes: https://github.com/libbpf/libbpf/issues/278
Co-developed-by: Quentin Monnet <quentin@isovalent.com>
Co-developed-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210908213226.1871016-1-andrii@kernel.org
Pull more tracing updates from Steven Rostedt:
- Add migrate-disable counter to tracing header
- Fix error handling in event probes
- Fix missed unlock in osnoise in error path
- Fix merge issue with tools/bootconfig
- Clean up bootconfig data when init memory is removed
- Fix bootconfig to loop only on subkeys
- Have kernel command lines override bootconfig options
- Increase field counts for synthetic events
- Have histograms dynamic allocate event elements to save space
- Fixes in testing and documentation
* tag 'trace-v5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/boot: Fix to loop on only subkeys
selftests/ftrace: Exclude "(fault)" in testing add/remove eprobe events
tracing: Dynamically allocate the per-elt hist_elt_data array
tracing: synth events: increase max fields count
tools/bootconfig: Show whole test command for each test case
bootconfig: Fix missing return check of xbc_node_compose_key function
tools/bootconfig: Fix tracing_on option checking in ftrace2bconf.sh
docs: bootconfig: Add how to use bootconfig for kernel parameters
init/bootconfig: Reorder init parameter from bootconfig and cmdline
init: bootconfig: Remove all bootconfig data when the init memory is removed
tracing/osnoise: Fix missed cpus_read_unlock() in start_per_cpu_kthreads()
tracing: Fix some alloc_event_probe() error handling bugs
tracing: Add migrate-disabled counter to tracing output.
sched_setscheduler() and rt_mutex_setprio() invoke the run-queue balance
callback after changing priorities or the scheduling class of a task. The
run-queue for which the callback is invoked can be local or remote.
That's not a problem for the regular rq::push_work which is serialized with
a busy flag in the run-queue struct, but for the balance_push() work which
is only valid to be invoked on the outgoing CPU that's wrong. It not only
triggers the debug warning, but also leaves the per CPU variable push_work
unprotected, which can result in double enqueues on the stop machine list.
Remove the warning and validate that the function is invoked on the
outgoing CPU.
Fixes: ae79270232 ("sched: Optimize finish_lock_switch()")
Reported-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/87zgt1hdw7.ffs@tglx
The intel powerclamp driver will setup a per-CPU worker with RT
priority. The worker will then invoke play_idle() in which it remains in
the idle poll loop until it is stopped by the timer it started earlier.
That timer needs to expire in hard interrupt context on PREEMPT_RT.
Otherwise the timer will expire in ksoftirqd as a SOFT timer but that task
won't be scheduled on the CPU because its priority is lower than the
priority of the worker which is in the idle loop.
Always expire the idle timer in hard interrupt context.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210906113034.jgfxrjdvxnjqgtmc@linutronix.de
Dan reported that rt_mutex_adjust_prio_chain() can be called with
.orig_waiter == NULL however commit a055fcc132 ("locking/rtmutex: Return
success on deadlock for ww_mutex waiters") unconditionally dereferences it.
Since both call-sites that have .orig_waiter == NULL don't care for the
return value, simply disable the deadlock squash by adding the NULL check.
Notably, both callers use the deadlock condition as a termination condition
for the iteration; once detected, it is sure that (de)boosting is done.
Arguably step [3] would be a more natural termination point, but it's
dubious whether adding a third deadlock detection state would improve the
code.
Fixes: a055fcc132 ("locking/rtmutex: Return success on deadlock for ww_mutex waiters")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/YS9La56fHMiCCo75@hirez.programming.kicks-ass.net
Merge yet more updates and hotfixes from Andrew Morton:
"Post-linux-next material, based upon latest upstream to catch the
now-merged dependencies:
- 10 patches.
Subsystems affected by this patch series: mm (vmstat and migration)
and compat.
And bunch of hotfixes, mostly cc:stable:
- 8 patches.
Subsystems affected by this patch series: mm (hmm, hugetlb, vmscan,
pagealloc, pagemap, kmemleak, mempolicy, and memblock)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
arch: remove compat_alloc_user_space
compat: remove some compat entry points
mm: simplify compat numa syscalls
mm: simplify compat_sys_move_pages
kexec: avoid compat_alloc_user_space
kexec: move locking into do_kexec_load
mm: migrate: change to use bool type for 'page_was_mapped'
mm: migrate: fix the incorrect function name in comments
mm: migrate: introduce a local variable to get the number of pages
mm/vmstat: protect per cpu variables with preempt disable on RT
* emailed hotfixes from Andrew Morton <akpm@linux-foundation.org>:
nds32/setup: remove unused memblock_region variable in setup_memory()
mm/mempolicy: fix a race between offset_il_node and mpol_rebind_task
mm/kmemleak: allow __GFP_NOLOCKDEP passed to kmemleak's gfp
mmap_lock: change trace and locking order
mm/page_alloc.c: avoid accessing uninitialized pcp page migratetype
mm,vmscan: fix divide by zero in get_scan_count
mm/hugetlb: initialize hugetlb_usage in mm_init
mm/hmm: bypass devmap pte when all pfn requested flags are fulfilled
After fork, the child process will get incorrect (2x) hugetlb_usage. If
a process uses 5 2MB hugetlb pages in an anonymous mapping,
HugetlbPages: 10240 kB
and then forks, the child will show,
HugetlbPages: 20480 kB
The reason for double the amount is because hugetlb_usage will be copied
from the parent and then increased when we copy page tables from parent
to child. Child will have 2x actual usage.
Fix this by adding hugetlb_count_init in mm_init.
Link: https://lkml.kernel.org/r/20210826071742.877-1-liuzixian4@huawei.com
Fixes: 5d317b2b65 ("mm: hugetlb: proc: add HugetlbPages field to /proc/PID/status")
Signed-off-by: Liu Zixian <liuzixian4@huawei.com>
Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge more updates from Andrew Morton:
"147 patches, based on 7d2a07b769.
Subsystems affected by this patch series: mm (memory-hotplug, rmap,
ioremap, highmem, cleanups, secretmem, kfence, damon, and vmscan),
alpha, percpu, procfs, misc, core-kernel, MAINTAINERS, lib,
checkpatch, epoll, init, nilfs2, coredump, fork, pids, criu, kconfig,
selftests, ipc, and scripts"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (94 commits)
scripts: check_extable: fix typo in user error message
mm/workingset: correct kernel-doc notations
ipc: replace costly bailout check in sysvipc_find_ipc()
selftests/memfd: remove unused variable
Kconfig.debug: drop selecting non-existing HARDLOCKUP_DETECTOR_ARCH
configs: remove the obsolete CONFIG_INPUT_POLLDEV
prctl: allow to setup brk for et_dyn executables
pid: cleanup the stale comment mentioning pidmap_init().
kernel/fork.c: unexport get_{mm,task}_exe_file
coredump: fix memleak in dump_vma_snapshot()
fs/coredump.c: log if a core dump is aborted due to changed file permissions
nilfs2: use refcount_dec_and_lock() to fix potential UAF
nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_group
nilfs2: fix memory leak in nilfs_sysfs_create_##name##_group
nilfs2: fix NULL pointer in nilfs_##name##_attr_release
nilfs2: fix memory leak in nilfs_sysfs_create_device_group
trap: cleanup trap_init()
init: move usermodehelper_enable() to populate_rootfs()
...
Since the commit e5efaeb8a8 ("bootconfig: Support mixing
a value and subkeys under a key") allows to co-exist a value
node and key nodes under a node, xbc_node_for_each_child()
is not only returning key node but also a value node.
In the boot-time tracing using xbc_node_for_each_child() to
iterate the events, groups and instances, but those must be
key nodes. Thus it must use xbc_node_for_each_subkey().
Link: https://lkml.kernel.org/r/163112988361.74896.2267026262061819145.stgit@devnote2
Fixes: e5efaeb8a8 ("bootconfig: Support mixing a value and subkeys under a key")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Setting the hist_elt_data.field_var_str[] array unconditionally to a
size of SYNTH_FIELD_MAX elements wastes space unnecessarily. The
actual number of elements needed can be calculated at run-time
instead.
In most cases, this will save a lot of space since it's a per-elt
array which isn't normally close to being full. It also allows us to
increase SYNTH_FIELD_MAX without worrying about even more wastage when
we do that.
Link: https://lkml.kernel.org/r/d52ae0ad5e1b59af7c4f54faf3fc098461fd82b3.camel@kernel.org
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Tested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Keno Fischer reported that when a binray loaded via ld-linux-x the
prctl(PR_SET_MM_MAP) doesn't allow to setup brk value because it lays
before mm:end_data.
For example a test program shows
| # ~/t
|
| start_code 401000
| end_code 401a15
| start_stack 7ffce4577dd0
| start_data 403e10
| end_data 40408c
| start_brk b5b000
| sbrk(0) b5b000
and when executed via ld-linux
| # /lib64/ld-linux-x86-64.so.2 ~/t
|
| start_code 7fc25b0a4000
| end_code 7fc25b0c4524
| start_stack 7fffcc6b2400
| start_data 7fc25b0ce4c0
| end_data 7fc25b0cff98
| start_brk 55555710c000
| sbrk(0) 55555710c000
This of course prevent criu from restoring such programs. Looking into
how kernel operates with brk/start_brk inside brk() syscall I don't see
any problem if we allow to setup brk/start_brk without checking for
end_data. Even if someone pass some weird address here on a purpose then
the worst possible result will be an unexpected unmapping of existing vma
(own vma, since prctl works with the callers memory) but test for
RLIMIT_DATA is still valid and a user won't be able to gain more memory in
case of expanding VMAs via new values shipped with prctl call.
Link: https://lkml.kernel.org/r/20210121221207.GB2174@grain
Fixes: bbdc6076d2 ("binfmt_elf: move brk out of mmap when doing direct loader exec")
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Reported-by: Keno Fischer <keno@juliacomputing.com>
Acked-by: Andrey Vagin <avagin@gmail.com>
Tested-by: Andrey Vagin <avagin@gmail.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Cc: Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Syzbot reported shift-out-of-bounds bug in profile_init().
The problem was in incorrect prof_shift. Since prof_shift value comes from
userspace we need to clamp this value into [0, BITS_PER_LONG -1]
boundaries.
Second possible shiht-out-of-bounds was found by Tetsuo:
sample_step local variable in read_profile() had "unsigned int" type,
but prof_shift allows to make a BITS_PER_LONG shift. So, to prevent
possible shiht-out-of-bounds sample_step type was changed to
"unsigned long".
Also, "unsigned short int" will be sufficient for storing
[0, BITS_PER_LONG] value, that's why there is no need for
"unsigned long" prof_shift.
Link: https://lkml.kernel.org/r/20210813140022.5011-1-paskripkin@gmail.com
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-and-tested-by: syzbot+e68c89a9510c159d9684@syzkaller.appspotmail.com
Suggested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are two bugs in this code. First, if the kzalloc() fails it leads
to a NULL dereference of "ep" on the next line. Second, if the
alloc_event_probe() function returns an error then it leads to an
error pointer dereference in the caller.
Link: https://lkml.kernel.org/r/20210824115150.GI31143@kili
Fixes: 7491e2c442 ("tracing: Add a probe that attaches to trace events")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Pull kgdb updates from Daniel Thompson:
"Changes for kgdb/kdb this cycle are dominated by a change from Sumit
that removes as small (256K) private heap from kdb. This is change
I've hoped for ever since I discovered how few users of this heap
remained in the kernel, so many thanks to Sumit for hunting these
down.
The other change is an incremental step towards SPDX headers"
* tag 'kgdb-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
kernel: debug: Convert to SPDX identifier
kdb: Rename members of struct kdbtab_t
kdb: Simplify kdb_defcmd macro logic
kdb: Get rid of redundant kdb_register_flags()
kdb: Rename struct defcmd_set to struct kdb_macro
kdb: Get rid of custom debug heap allocator
Add the missing description for the nents parameter, and fix a trivial
misalignment.
Fixes: fffe3cc8c2 ("dma-mapping: allow map_sg() ops to return negative error codes")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Christoph Hellwig <hch@lst.de>
