[Why&How]
Add a field to store the DCN IP offset for use with runtime offset
calculation
This offset is indexed using reg*_BASE_IDX for the corresponding
group of registers. For example, address of DIG_BE_CNTL instance 0 is
calculated like: dcn_reg_offsets[regDIG0_DIG_BE_CNTL_BASE_IDX] +
regDIG0_DIG_BE_CNTL.
{dcn,nbio}_reg_offsets are used only for the ASICs for which runtime
initializaion of offsets are enabled through the modified SR* macros
that contain an additional REG_STRUCT element in the macro definition.
DCN3.5+ will fail dc_create() if {dcn,nbio}_reg_offsets are null. They
are applicable starting with DCN32/321 and are not used for ASICs
upstreamed before them. ASICs before DCN32/321 will not contain any
computation that involves {dcn,nbio}_reg_offsets. For them, the
address/offset computation is done during compile time.
This is evident from the BASE_INNER definition for compile time vs run
time initialization:
Compile time init: #define BASE_INNER(seg) DCN_BASE__INST0_SEG ## seg
Run time init: #define BASE_INNER(seg) ctx->dcn_reg_offsets[seg]
BASE_INNER macro is local to each dcnxx_resource.c and hence different
ASICs can have either runtime or compile time initialization of offsets.
The computation of offset is done for registers all at once during
driver load and hence it does not introduce any performance overhead
during normal operation.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
ABGR16161616 colour format was added to dcn10/20/30, and set
any ARGB16161616 to the same value as it (26). As such, the
HDR10 Green Point y value was too far off of the EDID stated
value for DisplayPort.
[How]
Added back the pixel format as 22 for ARGB16161616 for
dcn10/20/30.
Reviewed-by: Reza Amini <reza.amini@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Ethan Wellenreiter <Ethan.Wellenreiter@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Unbounded request logic in resource/DML has some issues where
unbounded request is being enabled incorrectly. SW today enables
unbounded request unconditionally in hardware, on the assumption
that HW can always support it in single pipe scenarios.
This worked until now because the same assumption is made in DML.
A new DML update is needed to fix a bug, where there are single
pipe scenarios where unbounded cannot be enabled, and this change
in DML needs to be ported in, and dcn32 resource logic fixed.
[how]
First, dcn32_resource should program unbounded req in HW according
to unbounded req enablement output from DML, as opposed to DML input
Second, port in DML1 update which disables unbounded req in some
scenarios to fix an issue with poor stutter performance
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Jun Lei <jun.lei@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Status flags definition is reduced to read
less bytes in SCDC transaction for status update.
[How]
Reduce definition of reserved bytes from 3 to 1
for status update.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Ideally link capability should be independent from the link
configuration that we decide to use in enable link. Otherwise if link
capability is changed after validation has completed, we could end up
enabling a link configuration with invalid configuration. This would
lead to over link bandwidth subscription or in the extreme case
causes us to enable HPO link to a DIO stream.
[how]
Add a new struct in pipe ctx called link config. This structure will
contain link configuration to enable a link. It will be populated
during map pool resources after we validate link bandwidth. Remove
the reference of verified link cap during enable link process and
use link config in pipe ctx instead.
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When playing NV12 1080p MPO video, it is pipe splitting so
we see two pipes in fullscreen and four pipes in windowed
mode. Pipe split is happening because we are setting
MaximumMPCCombine = 1
[How]
Algorithm for MaximumMPCCombine has extra conditions we do
not need. Use DCN31 algorithm instead
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Black screen encountered when disabling Freesync through OSD on some
displays.
[How]
Set the should_disable flag when new top pipe has no plane state to
ensure that pipes get cleaned up.
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In single display configuration, windowed MPO does not work
with ODM combine.
[How]
For ODM + MPO window on one half of ODM, only 3 pipes should
be allocated and scaling parameters adjusted to handle this case.
Otherwise, we use 4 pipes.
Move copy_surface_update_to_plane() before dc_add_plane_to_context()
so that it gets the updated rect information when setting up
the pipes.
Add dc_check_boundary_crossing_for_windowed_mpo_with_odm() to force
a full update when we cross a boundary requiring us to reconfigure
the number of pipes between 3 and 4 pipes.
Set config.enable_windowed_mpo_odm to true when we have the
debug.enable_single_display_2to1_odm_policy set to true.
Don't fail validating ODM with windowed MPO if
config.enable_windowed_mpo_odm is true.
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Exit SubVP if MPO is in use since SubVP + MPO together is not supported.
- Don't add SubVP at validation time if we see MPO is in use
Issues fixed in the SubVP / MPO transition:
1. Enable phantom pipes in post unlock function to prevent underflow
when an active pipe is being transitioned to be a phantom pipe (VTG
updates take place right away). Also must wait for VUPDATE of the main
pipe to complete first
2. Don't wait for MPCC idle when transitioning a phantom pipe to an
actual pipe. MPCC_STATUS is never asserted due to OTG being off for
phantom pipes
3. When transitioning an active pipe to phantom, program DET right away
(same as disabling the pipe) or the DET update will only take when
the phantom pipe is enabled which can cause DET allocation errors.
4. For K1/K2 programming of phantom pipes, use same settings as the
main pipe. Also don't program K1 / K2 = 0xF ever since the field is only
1 / 2 bits wide.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Output Data Mapping is a power saving feature that allows us to run at
reduced DPP and DISP clocks compared to what could be achieved with a
single pipe.
Set the default policy for single display use case to use 2 to 1 ODM combine.
The options are queried by DC and appropriate register programming sequence
is initiated to enable this feature.
Fixes: 235c676342 ("drm/amd/display: add DCN32/321 specific files for Display Core")
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Add a missing callback to set DIG FIFO output pixel mode. This is used
when ODM combine is activated.
Fixes: 235c676342 ("drm/amd/display: add DCN32/321 specific files for Display Core")
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are several things wrong here. First, none of these
numbers are FP, so there is no need to cast to double. Next
make sure to use proper 64 bit division helpers.
Fixes: 85f4bc0c33 ("drm/amd/display: Add SubVP required code")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_hwseq.c:428:33: warning: variable 'old_pipe' set but not used
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The return value indicates whether the operation(disable/enable) succeeded
or not. The existing logic reports wrong result even if the disablement was
performed successfully. That will make succeeding reenablement abandoned
as dc->idle_optimizations_allowed is always true.
[How]
Correct the return value to reflect the real result of disablement.
Fixes: 235c676342 ("drm/amd/display: add DCN32/321 specific files for Display Core")
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some variables from the struct vba_vars_st are not referenced in any
other place on the codebase. As they are not used, this commit removes
those variables.
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function CalculateBytePerPixelAnd256BBlockSizes was defined four
times: on display_mode_vba_30.c, display_rq_dlg_calc_30.c,
display_mode_vba_31.c and display_rq_dlg_calc_31.c. In order to avoid
code duplication, the CalculateBytePerPixelAnd256BBlockSizes is defined
on display_mode_vba_30.h and used across dcn30 and dcn31.
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eliminate the follow smatch warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:3151 commit_planes_for_stream() warn: inconsistent indenting
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function Calculate256BBlockSizes always returns true, regardless of
the parameters. As any file checks the return of the function, this
commit changes the return value to void.
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This DC patchset brings improvements in multiple areas. In summary, we
highlight:
- Program ACP-related registers
- Fixes for DMUB, DPIA, PSR, and others
- Improvements in the pipe split
- Add SubVP code
- Add basic setup for FAMS support
- Improve BB capabilities
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Integrate OVT timing from DM to DC logic to update info frame
and mode management to report the resolution to the OS.
[How]
Reflect RID and Frame Rate to AVI InfoFrame Version 5.
Define new Timing Standard for OVT timing.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Chris Park <Chris.Park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Uninitialized variable causes diag compilation build failure.
[How]
- Ensure that variable in question is always initialized before being
used.
- The variable in question is the USB4 DP training pattern. In case an
unsupported training pattern has been requested, update status
accordingly and abort current link training attempt.
Reviewed-by: Meenakshikumar Somasundaram <Meenakshikumar.Somasundaram@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For some customer blending transition cases, the
available pipe for second stream is a pipe index that is
greater than the number of timing generators, which
can cause a problem in acquire_first_free_pipe since it
assumes same index for pipe and timing generator
[How]
Added logic to use last timing generator index
if the pipe index is greater than number of timing generators.
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
With ODM policy 2 to 1, there exists a new use case
scenario where stream content is unchanged, but ODM
may be used. When this happens, the stream needs
to be committed with a new pipe setting.
This did not happen due to stream change
detection logic not accounting for ODM.
[How]
Set ODM flag in stream and commit stream when change
in ODM has been detected due to policy change.
Reviewed-by: Samson Tam <Samson.Tam@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
It's possible that we don't have a link encoder assignment if the
context is NULL but we're calling dc_add_stream_to_ctx from DM directly.
Link encoder assignment will happen later after global validation
runs with fast_validate = false.
[How]
Remove the ASSERTION. We already guard against NULL link_enc.
Reviewed-by: Michael Strauss <Michael.Strauss@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In the case where we don't support DMUB aux but we have DPIA links
in the configuration we might try to message AUX using the legacy
path - where DDC pin is NULL. This causes a NULL pointer dereference.
[How]
Guard against NULL DDC pin, return a failure for aux engine acquire.
Reviewed-by: Michael Strauss <Michael.Strauss@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
